diff options
Diffstat (limited to 'target/linux/ar71xx')
448 files changed, 0 insertions, 80672 deletions
diff --git a/target/linux/ar71xx/Makefile b/target/linux/ar71xx/Makefile deleted file mode 100644 index aa53b49735..0000000000 --- a/target/linux/ar71xx/Makefile +++ /dev/null @@ -1,24 +0,0 @@ -# -# Copyright (C) 2008-2011 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk - -ARCH:=mips -BOARD:=ar71xx -BOARDNAME:=Atheros AR7xxx/AR9xxx -FEATURES:=usbgadget source-only -CPU_TYPE:=24kc -SUBTARGETS:=generic tiny nand mikrotik - -KERNEL_PATCHVER:=4.14 - -include $(INCLUDE_DIR)/target.mk - -DEFAULT_PACKAGES += \ - kmod-gpio-button-hotplug swconfig \ - kmod-ath9k uboot-envtools - -$(eval $(call BuildTarget)) diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds deleted file mode 100755 index 54727a6e52..0000000000 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ /dev/null @@ -1,1130 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2011 OpenWrt.org -# - -. /lib/functions/uci-defaults.sh - -board_config_update - -board=$(board_name) - -case "$board" in -a40) - ucidef_set_led_default "status-red" "Status (red)" "a40:red:status" "0" - ucidef_set_led_default "status-blue" "Status (blue)" "a40:blue:status" "0" - ;; -a60) - ucidef_set_led_default "status-red" "Status (red)" "a60:red:status" "0" - ucidef_set_led_default "status-blue" "Status (blue)" "a60:blue:status" "0" - ;; -airgateway|\ -airgatewaypro) - ucidef_set_led_wlan "wlan" "WLAN" "ubnt:blue:wlan" "phy0tpt" - ;; -alfa-nx) - ucidef_set_led_netdev "wan" "WAN" "alfa:green:led_2" "eth0" - ucidef_set_led_netdev "lan" "LAN" "alfa:green:led_3" "eth1" - ;; -all0258n|\ -all0315n) - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:red:rssilow" "wlan0" "1" "40" "0" "6" - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$board:yellow:rssimedium" "wlan0" "30" "80" "-29" "5" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:rssihigh" "wlan0" "70" "100" "-69" "8" - ;; -antminer-s1|\ -antminer-s3) - ucidef_set_led_default "sys" "SYS" "$board:green:sys" "0" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - - case "$board" in - antminer-s3) - ucidef_set_led_default "lan" "LAN" "$board:yellow:lan" "0" - ;; - esac - ;; -antrouter-r1) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ucidef_set_led_default "btc" "BTC" "$board:green:btc" "0" - ;; -ap121f) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ;; -ap147-010) - ucidef_set_led_netdev "wan" "WAN" "ap147:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "ap147:green:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "ap147:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "ap147:green:lan3" "switch0" "0x04" - ucidef_set_led_switch "lan4" "LAN4" "ap147:green:lan4" "switch0" "0x02" - ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt" - ;; -ap90q|\ -cpe505n|\ -cpe830|\ -cpe870|\ -dr531|\ -e600g-v2|\ -e600gac-v2|\ -e750a-v4) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1" - - case "$board" in - ap90q) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ;; - cpe505n) - ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt" - ;; - cpe830|\ - cpe870) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:green:link1" "wlan0" "1" "100" "0" "13" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$board:green:link2" "wlan0" "26" "100" "-25" "13" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$board:green:link3" "wlan0" "51" "100" "-50" "13" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:link4" "wlan0" "76" "100" "-75" "13" - ;; - esac - ;; -ap531b0|\ -gl-usb150|\ -sc1750|\ -sc450) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ;; -ap91-5g|\ -n5q) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "signal1" "SIGNAL1" "$board:red:signal1" "wlan0" "1" "100" - ucidef_set_led_rssi "signal2" "SIGNAL2" "$board:orange:signal2" "wlan0" "25" "100" - ucidef_set_led_rssi "signal3" "SIGNAL3" "$board:green:signal3" "wlan0" "50" "100" - ucidef_set_led_rssi "signal4" "SIGNAL4" "$board:green:signal4" "wlan0" "75" "100" - - case "$board" in - n5q) - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ;; - esac - ;; -archer-c25-v1) - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt" - ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04" - ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02" - ;; -archer-c5|\ -archer-c7) - ucidef_set_led_usbport "usb1" "USB1" "tp-link:green:usb1" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB2" "tp-link:green:usb2" "usb2-port1" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:green:wlan2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:green:wlan5g" "phy0tpt" - ;; -archer-c58-v1|\ -archer-c59-v1|\ -archer-c59-v2|\ -archer-c60-v1|\ -archer-c60-v2) - ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E" - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt" - - case "$board" in - archer-c59-v1|\ - archer-c59-v2) - ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1" - ;; - esac - ;; -archer-c7-v4|\ -archer-c7-v5) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt" - ucidef_set_led_switch "wan" "WAN" "$board:green:wan" "switch0" "0x02" - ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan4" "switch0" "0x04" - ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan3" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan2" "switch0" "0x10" - ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan1" "switch0" "0x20" - - case "$board" in - archer-c7-v4) - ucidef_set_led_usbport "usb1" "USB1" "$board:green:usb1" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB2" "$board:green:usb2" "usb2-port1" - ;; - esac - - case "$board" in - archer-c7-v5) - ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1" - ;; - esac - ;; -arduino-yun) - ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt" - ucidef_set_led_usbport "usb" "USB" "arduino:white:usb" "1-1-port1" - ;; -bhr-4grv2) - ucidef_set_led_default "power" "POWER" "buffalo:green:power" "1" - ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0" - ;; -bsb) - ucidef_set_led_default "sys" "SYS" "$board:red:sys" "1" - ;; -bullet-m|\ -bullet-m-xw|\ -loco-m-xw|\ -nanostation-m|\ -nanostation-m-xw|\ -rocket-m|\ -rocket-m-xw) - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:red:link1" "wlan0" "1" "100" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:orange:link2" "wlan0" "26" "100" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:green:link3" "wlan0" "51" "100" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:green:link4" "wlan0" "76" "100" - ;; -bxu2000n-2-a1) - ucidef_set_led_wlan "wlan" "WLAN" "bhu:green:wlan" "phy0tpt" - ;; -cap324) - ucidef_set_led_netdev "lan" "LAN" "pcs:green:lan" "eth0" - ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "pcs:amber:wlan" "phy0tpt" - ucidef_set_led_wlan "wlan_green" "WLAN_GREEN" "pcs:green:wlan" "phy1tpt" - ;; -c-55) - ucidef_set_led_netdev "lan_green" "LAN_GREEN" "$board:green:lan" "eth0" - ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "$board:amber:wlan" "phy0tpt" - ucidef_set_led_wlan "wlan_green" "WLAN_GREEN" "$board:green:wlan" "phy1tpt" - ;; -c-60) - ucidef_set_led_wlan "wlan1_green" "WLAN1_GREEN" "$board:green:wlan1" "phy0tpt" - ucidef_set_led_wlan "wlan2_green" "WLAN2_GREEN" "$board:green:wlan2" "phy1tpt" - ;; -cap4200ag) - ucidef_set_led_default "lan_green" "LAN_GREEN" "senao:green:lan" "1" - ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "senao:amber:wlan" "phy0tpt" - ucidef_set_led_wlan "wlan_green" "WLAN_GREEN" "senao:green:wlan" "phy1tpt" - ;; -carambola2) - ucidef_set_led_netdev "lan" "LAN" "$board:orange:eth0" "eth0" - ucidef_set_led_netdev "wan" "WAN" "$board:orange:eth1" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ;; -cf-e316n-v2) - ucidef_set_led_netdev "lan" "LAN" "$board:blue:lan" "eth0" - ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt" - ;; -cf-e320n-v2) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ucidef_set_led_netdev "wan" "WAN" "$board:red:wan" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt" - ;; -cf-e355ac-v1|\ -cf-e355ac-v2|\ -cf-e375ac|\ -cf-e380ac-v1|\ -cf-e380ac-v2|\ -cf-e385ac) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:blue:wlan2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:red:wlan5g" "phy0tpt" - - case "$board" in - cf-e375ac|\ - cf-e385ac) - ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x04" - ;; - *) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ;; - esac - ;; -cf-e520n|\ -cf-e530n) - ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1" - ;; -cpe210|\ -cpe210-v2|\ -cpe210-v3|\ -cpe510|\ -cpe510-v2|\ -wbs210|\ -wbs510) - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100" "0" "13" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "26" "100" "-25" "13" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "51" "100" "-50" "13" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13" - - case "$board" in - cpe210-v2|\ - cpe210-v3|\ - cpe510-v2) - ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan0" "eth0" - ;; - *) - ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" - ;; - esac - ;; -cr3000) - ucidef_set_led_netdev "wan" "WAN" "pcs:blue:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "pcs:blue:lan1" "switch0" "0x04" - ucidef_set_led_switch "lan2" "LAN2" "pcs:blue:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "pcs:blue:lan3" "switch0" "0x10" - ucidef_set_led_switch "lan4" "LAN4" "pcs:blue:lan4" "switch0" "0x02" - ucidef_set_led_wlan "wlan" "WLAN" "pcs:blue:wlan" "phy0tpt" - ;; -cr5000) - ucidef_set_led_wlan "wlan" "WLAN" "pcs:blue:wlan" "phy0tpt" - ucidef_set_led_usbport "usb" "USB" "pcs:white:wps" "usb1-port1" - ;; -db120) - ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1" - ;; -dr344) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1" - ;; -dragino2) - ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt" - ucidef_set_led_netdev "lan" "LAN" "$board:red:lan" "eth0" - ucidef_set_led_netdev "wan" "WAN" "$board:red:wan" "eth1" - ;; -dw33d) - ucidef_set_led_usbport "mmc" "MMC" "$board:blue:mmc" "usb1-port1" - ucidef_set_led_usbport "usb" "USB" "$board:blue:usb" "usb2-port1" - ucidef_set_led_netdev "internet" "INTERNET" "$board:blue:internet" "eth0" - ucidef_set_led_wlan "wlan2g" "WLAN-2.4G" "$board:blue:wlan-2g" "phy1tpt" - ;; -eap300v2) - ucidef_set_led_netdev "lan" "LAN" "engenius:blue:lan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "engenius:blue:wlan" "phy0tpt" - ;; -ens202ext) - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "engenius:amber:wlan1" "wlan0" "1" "100" "0" "13" - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "engenius:red:wlan2" "wlan0" "25" "100" "-39" "13" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "engenius:amber:wlan3" "wlan0" "50" "100" "-59" "13" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "engenius:green:wlan4" "wlan0" "75" "100" "-79" "13" - ;; -f9k1115v2) - ucidef_set_led_usbport "usb2" "USB2" "belkin:green:usb2" "usb1-port1" - ;; -fritz300e) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:green:rssi0" "wlan0" "1" "100" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$board:green:rssi1" "wlan0" "20" "100" - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$board:green:rssi2" "wlan0" "40" "100" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$board:green:rssi3" "wlan0" "60" "100" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:rssi4" "wlan0" "80" "100" - ;; -dap-1330-a1) - ucidef_set_rssimon "wlan0" "2000000" "2" - ucidef_set_led_rssi "wifi-low" "wifi-low" "d-link:red:wifi" "wlan0" "1" "29" - ucidef_set_led_rssi "wifi-medium" "wifi-medium" "d-link:green:wifi" "wlan0" "30" "100" - ucidef_set_led_rssi "wifi-high" "wifi-high" "d-link:green:signal1" "wlan0" "50" "100" - ucidef_set_led_rssi "wifi-max" "wifi-max" "d-link:green:signal2" "wlan0" "70" "100" - ;; -dap-2695-a1) - ucidef_set_led_default "power" "POWER" "d-link:green:power" "1" - ucidef_set_led_default "diag" "DIAG" "d-link:red:power" "0" - ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "d-link:green:wlan2g" "phy1tpt" - ;; -dhp-1565-a1) - ucidef_set_led_switch "wan" "WAN" "d-link:green:planet" "switch0" "0x20" - ;; -dir-600-a1|\ -dir-615-e1|\ -dir-615-e4|\ -ebr-2310-c1) - ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "d-link:green:lan1" "switch0" "0x02" - ucidef_set_led_switch "lan2" "LAN2" "d-link:green:lan2" "switch0" "0x04" - ucidef_set_led_switch "lan3" "LAN3" "d-link:green:lan3" "switch0" "0x08" - ucidef_set_led_switch "lan4" "LAN4" "d-link:green:lan4" "switch0" "0x10" - ;; -dir-615-c1) - ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "d-link:green:wlan" "phy0tpt" - ;; -dir-825-b1|\ -dir-825-c1) - ucidef_set_led_usbport "usb" "USB" "d-link:blue:usb" "usb1-port1" - - case "$board" in - dir-825-c1) - ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "d-link:blue:wlan2g" "phy0tpt" - ;; - esac - ;; -dir-615-i1) - ucidef_set_led_default "power" "POWER" "d-link:green:power" "1" - ucidef_set_led_default "diag" "DIAG" "d-link:amber:power" "0" - ucidef_set_led_default "wps" "WPS" "d-link:blue:wps" "0" - ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "d-link:green:wlan" "phy0tpt" - ;; -dlan-hotspot) - ucidef_set_led_wlan "wlan" "WLAN" "devolo:green:wifi" "phy0tpt" - ;; -dlan-pro-500-wp) - ucidef_set_led_default "power" "System Power" "devolo:green:status" "1" - ucidef_set_led_netdev "lan" "Ethernet Activity" "devolo:green:eth" "br-lan" - ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "devolo:green:wlan-2g" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "devolo:blue:wlan-5g" "none" - ;; -dlan-pro-1200-ac) - ucidef_set_led_wlan "wlan" "WLAN" "devolo:status:wlan" "phy0radio" - ucidef_set_led_gpio "plcw" "dLAN" "devolo:status:dlan" "17" "0" - ucidef_set_led_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0" - ;; -e1700ac-v2) - ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt" - ;; -e558-v2|\ -e750g-v8) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ;; -esr900) - ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "engenius:blue:wlan-2g" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "engenius:blue:wlan-5g" "phy1tpt" - ;; -esr1750|\ -epg5000) - ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan-2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan-5g" "phy0tpt" - ;; -fritz4020) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1" - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ;; -fritz450e) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ;; -gl-ar300m) - ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt" - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1" - ;; -gl-ar750) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:white:wlan2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:white:wlan5g" "phy0tpt" - ;; -gl-ar750s) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt" - ;; -gl-mifi) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1" - ucidef_set_led_netdev "3gnet" "3GNET" "$board:green:net" "3g-wan" - ;; -gl-ar150) - ucidef_set_led_wlan "wlan" "WLAN" "$board:orange:wlan" "phy0tpt" - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1" - ;; -gl-ar300) - ucidef_set_led_wlan "wlan" "WLAN" "$board:wlan" "phy0tpt" - ;; -gl-domino|\ -sc300m|\ -wrt160nl) - ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt" - ;; -gl-inet) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt" - ;; -hiwifi-hc6361) - ucidef_set_led_netdev "inet" "INET" "hiwifi:blue:internet" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "hiwifi:blue:wlan-2p4" "phy0tpt" - ;; -hornet-ub|\ -hornet-ub-x2) - ucidef_set_led_netdev "lan" "LAN" "alfa:blue:lan" "eth0" - ucidef_set_led_netdev "wan" "WAN" "alfa:blue:wan" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "alfa:blue:wlan" "phy0tpt" - ucidef_set_led_usbport "usb" "USB" "alfa:blue:usb" "usb1-port1" - ;; -koala) - ucidef_set_led_default "power" "POWER" "$board:green:power" "1" - ucidef_set_led_wlan "wlan2g" "WLAN 2.4GHz" "$board:yellow:wlan2" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN 5GHz" "$board:red:wlan58" "phy0tpt" - ;; -lan-turtle) - ucidef_set_led_netdev "wan" "WAN" "$board:orange:system" "eth1" - ;; -lbe-m5) - ucidef_set_led_netdev "lan" "LAN" "ubnt:green:lan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "ubnt:green:wlan" "phy0tpt" - ;; -mc-mac1200r) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "mercury:green:wlan2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "mercury:green:wlan5g" "phy0tpt" - ;; -mr12|\ -mr16) - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" - ucidef_set_led_wlan "wlan1" "WLAN1" "$board:green:wifi1" "phy0assoc" - ucidef_set_led_wlan "wlan2" "WLAN2" "$board:green:wifi2" "phy0assoc" - ucidef_set_led_wlan "wlan3" "WLAN3" "$board:green:wifi3" "phy0assoc" - ucidef_set_led_wlan "wlan4" "WLAN4" "$board:green:wifi4" "phy0tpt" - ;; -mr18) - ucidef_set_led_netdev "wlan0" "WLAN0" "$board:blue:tricolor0" "wlan0" - ;; -mr600) - ucidef_set_led_wlan "wlan58" "WLAN58" "$board:green:wlan58" "phy0tpt" - ucidef_set_led_default "wps" "WPS" "mr600:blue:wps" "0" - ;; -mr600v2) - ucidef_set_led_default "wlan24-red" "WLAN 2.4GHz (red)" "mr600:red:wlan24" "0" - ucidef_set_led_default "wlan24-yellow" "WLAN 2.4GHz (yellow)" "mr600:yellow:wlan24" "0" - ucidef_set_led_wlan "wlan24-green" "WLAN 4GHz (green)" "mr600:green:wlan24" "phy1tpt" - ucidef_set_led_default "wlan5-red" "WLAN 5GHz (red)" "mr600:red:wlan58" "0" - ucidef_set_led_default "wlan5-yellow" "WLAN 5GHz (yellow)" "mr600:yellow:wlan58" "0" - ucidef_set_led_wlan "wlan5-green" "WLAN 5GHz (green)" "mr600:green:wlan58" "phy0tpt" - ;; -mr1750|\ -mr1750v2) - ucidef_set_led_netdev "lan" "LAN" "mr1750:blue:wan" "eth0" - ucidef_set_led_wlan "wlan58" "WLAN58" "mr1750:blue:wlan58" "phy0tpt" - ucidef_set_led_wlan "wlan24" "WLAN24" "mr1750:blue:wlan24" "phy1tpt" - ucidef_set_led_default "status-red" "Status (red)" "mr1750:red:wifi" "0" - ucidef_set_led_default "status-green" "Status (green)" "mr1750:green:wifi" "0" - ;; -mr900|\ -mr900v2) - ucidef_set_led_netdev "lan" "LAN" "mr900:blue:wan" "eth0" - ucidef_set_led_wlan "wlan24" "WLAN24" "mr900:blue:wlan24" "phy0tpt" - ucidef_set_led_wlan "wlan58" "WLAN58" "mr900:blue:wlan58" "phy1tpt" - ucidef_set_led_default "status-red" "Status (red)" "mr900:red:wifi" "0" - ucidef_set_led_default "status-green" "Status (green)" "mr900:green:wifi" "0" - ;; -mynet-n600) - ucidef_set_led_netdev "wan" "WAN" "wd:blue:internet" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "wd:green:lan1" "switch0" "0x02" - ucidef_set_led_switch "lan2" "LAN2" "wd:green:lan2" "switch0" "0x10" - ucidef_set_led_switch "lan3" "LAN3" "wd:green:lan3" "switch0" "0x08" - ucidef_set_led_switch "lan4" "LAN4" "wd:green:lan4" "switch0" "0x04" - ;; -mynet-rext) - ucidef_set_led_netdev "lan" "LAN" "wd:blue:ethernet" "eth0" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "wd:blue:quality1" "wlan0" "1" "40" "0" "6" - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "wd:blue:quality2" "wlan0" "30" "80" "-29" "5" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "wd:blue:quality3" "wlan0" "70" "100" "-69" "8" - ucidef_set_led_wlan "wlan" "WLAN" "wd:blue:wireless" "phy0tpt" - ;; -mzk-w04u) - ucidef_set_led_usbport "usb" "USB" "planex:green:usb" "usb1-port1" - ;; -mzk-w300nh) - ucidef_set_led_wlan "wlan" "WLAN" "planex:green:wlan" "phy0tpt" - ;; -nbg460n_550n_550nh) - ucidef_set_led_wlan "wlan" "WLAN" "nbg460n:green:wlan" "phy0tpt" - ;; -nbg6616) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wifi2g" "phy1tpt" - ucidef_set_led_wlan "wlan5" "WLAN5" "$board:green:wifi5g" "phy0tpt" - ucidef_set_led_usbport "usb1" "USB1" "$board:green:usb1" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB2" "$board:green:usb2" "usb2-port1" - ;; -nbg6716) - ucidef_set_led_netdev "wan" "WAN" "$board:white:internet" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "$board:white:wifi2g" "phy1tpt" - ucidef_set_led_wlan "wlan5" "WLAN5" "$board:white:wifi5g" "phy0tpt" - ucidef_set_led_usbport "usb1" "USB1" "$board:white:usb1" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB2" "$board:white:usb2" "usb2-port1" - ;; -om2p|\ -om2p-hs|\ -om2p-hsv2|\ -om2p-hsv3|\ -om2p-hsv4|\ -om2p-lc|\ -om2pv2|\ -om2pv4) - ucidef_set_led_netdev "port1" "port1" "om2p:blue:wan" "eth0" - ucidef_set_led_netdev "port2" "port2" "om2p:blue:lan" "eth1" - ucidef_set_led_default "wlan-red" "WLAN (red)" "om2p:red:wifi" "0" - ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om2p:yellow:wifi" "0" - ucidef_set_led_default "wlan-green" "WLAN (green)" "om2p:green:wifi" "0" - ;; -om5p|\ -om5p-an) - ucidef_set_led_netdev "port1" "port1" "om5p:blue:wan" "eth0" - ucidef_set_led_netdev "port2" "port2" "om5p:blue:lan" "eth1" - ucidef_set_led_default "wlan-red" "WLAN (red)" "om5p:red:wifi" "0" - ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om5p:yellow:wifi" "0" - ucidef_set_led_default "wlan-green" "WLAN (green)" "om5p:green:wifi" "0" - ;; -om5p-ac) - ucidef_set_led_netdev "port1" "port1" "om5pac:blue:lan" "eth0" - ucidef_set_led_netdev "port2" "port2" "om5pac:blue:wan" "eth1" - ucidef_set_led_default "wlan-red" "WLAN (red)" "om5pac:red:wifi" "0" - ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om5pac:yellow:wifi" "0" - ucidef_set_led_default "wlan-green" "WLAN (green)" "om5pac:green:wifi" "0" - ;; -om5p-acv2) - ucidef_set_led_default "wlan-red" "WLAN (red)" "om5pac:red:wifi" "0" - ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om5pac:yellow:wifi" "0" - ucidef_set_led_default "wlan-green" "WLAN (green)" "om5pac:green:wifi" "0" - ;; -omy-g1) - ucidef_set_led_wlan "wlan" "WLAN" "omy:green:wlan" "phy0tpt" - ucidef_set_led_netdev "wan" "WAN" "omy:green:wan" "eth0" - ucidef_set_led_netdev "lan" "LAN" "omy:green:lan" "eth1" - ;; -omy-x1) - ucidef_set_led_default "power" "POWER" "omy:green:power" "1" - ucidef_set_led_default "wan" "WAN" "omy:green:wan" "eth0" - ;; -pqi-air-pen) - ucidef_set_led_wlan "wlan" "WLAN" "pqi-air-pen:blue:wlan" "phy0tpt" - ucidef_set_led_default "wps" "WPS" "pqi-air-pen:blue:wps" "0" - ;; -qihoo-c301) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "qihoo:red:status" "phy1tpt" - ;; -r36a) - ucidef_set_led_netdev "lan" "LAN" "$board:blue:lan" "eth0" - ucidef_set_led_usbport "usb" "USB" "$board:blue:usb" "usb1-port1" - ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt" - ;; -r602n|\ -t830|\ -zbt-we1526) - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04" - ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - - case "$board" in - t830) - ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1" - ;; - esac - ;; -r6100) - ucidef_set_led_netdev "wan" "WAN (green)" "netgear:green:wan" "eth0" - ucidef_set_led_usbport "usb" "USB" "netgear:blue:usb" "usb1-port1" - ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy1tpt" - ;; -rb-750) - ucidef_set_led_default "act" "act" "rb750:green:act" "1" - ucidef_set_led_netdev "port1" "port1" "rb750:green:port1" "eth1" - ucidef_set_led_switch "port2" "port2" "rb750:green:port2" "switch0" "0x10" - ucidef_set_led_switch "port3" "port3" "rb750:green:port3" "switch0" "0x08" - ucidef_set_led_switch "port4" "port4" "rb750:green:port4" "switch0" "0x04" - ucidef_set_led_switch "port5" "port5" "rb750:green:port5" "switch0" "0x02" - ;; -rb-750-r2|\ -rb-750p-pbr2|\ -rb-750up-r2) - ucidef_set_led_timer "user" "USER" "rb:green:user" "1000" "1000" - ucidef_set_led_netdev "port1" "port1" "rb:green:port1" "eth0" - ucidef_set_led_switch "port2" "port2" "rb:green:port2" "switch0" "0x10" - ucidef_set_led_switch "port3" "port2" "rb:green:port3" "switch0" "0x08" - ucidef_set_led_switch "port4" "port3" "rb:green:port4" "switch0" "0x04" - ucidef_set_led_switch "port5" "port5" "rb:green:port5" "switch0" "0x02" - ;; -rb-911-2hn|\ -rb-911-5hn) - ucidef_set_led_netdev "eth" "ETH" "rb:green:eth" "eth0" - ;; -rb-931-2nd|\ -rb-941-2nd) - ucidef_set_led_timer "user" "USR/ACT" "rb:green:user" "1000" "1000" - ;; -rb-951ui-2nd|\ -rb-952ui-5ac2nd) - ucidef_set_led_timer "user" "USER" "rb:green:user" "1000" "1000" - ucidef_set_led_netdev "port1" "port1" "rb:green:port1" "eth0" - ucidef_set_led_switch "port2" "port2" "rb:green:port2" "switch0" "0x10" - ucidef_set_led_switch "port3" "port2" "rb:green:port3" "switch0" "0x08" - ucidef_set_led_switch "port4" "port3" "rb:green:port4" "switch0" "0x04" - ucidef_set_led_switch "port5" "port5" "rb:green:port5" "switch0" "0x02" - ucidef_set_led_wlan "wlan" "WLAN" "rb:blue:wlan" "phy0tpt" - ;; -rb-962uigs-5hact2hnt) - ucidef_set_led_timer "user" "USER/SFP" "rb:green:user" "1000" "1000" - ;; -rb-2011il|\ -rb-2011ils|\ -rb-2011l|\ -rb-2011uas|\ -rb-2011uas-2hnd|\ -rb-2011uias|\ -rb-2011uias-2hnd|\ -rb-2011uias-2hnd-r2) - ucidef_set_led_switch "eth6" "ETH6" "rb:green:eth6" "switch1" "0x20" - ucidef_set_led_switch "eth7" "ETH7" "rb:green:eth7" "switch1" "0x10" - ucidef_set_led_switch "eth8" "ETH8" "rb:green:eth8" "switch1" "0x08" - ucidef_set_led_switch "eth9" "ETH9" "rb:green:eth9" "switch1" "0x04" - ucidef_set_led_switch "eth10" "ETH10" "rb:green:eth10" "switch1" "0x02" - ;; -rb-lhg-5nd) - ucidef_set_led_netdev "lan" "LAN" "rb:green:eth" "eth0" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "rb:green:rssi0" "wlan0" "1" "100" "0" "13" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "rb:green:rssi1" "wlan0" "20" "100" "-19" "13" - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "rb:green:rssi2" "wlan0" "40" "100" "-39" "13" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "rb:green:rssi3" "wlan0" "60" "100" "-59" "13" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "rb:green:rssi4" "wlan0" "80" "100" "-79" "13" - ;; -rb-map-2nd) - ucidef_set_led_switch "eth1" "WAN" "rb:green:eth1" "switch0" "0x02" - ucidef_set_led_switch "eth2" "LAN" "rb:green:eth2" "switch0" "0x04" - ucidef_set_led_gpio "poe" "POE" "rb:red:poe_out" "14" "0" - ucidef_set_led_wlan "wlan" "WLAN" "rb:green:wlan" "phy0tpt" - ;; -rb-mapl-2nd) - ucidef_set_led_default "power" "POWER" "rb:green:power" "1" - ucidef_set_led_netdev "lan" "LAN" "rb:green:eth" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "rb:green:wlan" "phy0tpt" - ;; -rb-wap-2nd) - ucidef_set_led_timer "user" "USER" "rb:green:user" "1000" "1000" - ucidef_set_led_wlan "wlan" "WLAN" "rb:green:wlan" "phy0tpt" - ;; -rb-wapr-2nd) - ucidef_set_led_wlan "wlan" "WLAN" "rb:green:user" "phy0tpt" - ;; -re355|\ -re450) - ucidef_set_led_netdev "lan_data" "LAN Data" "$board:green:lan_data" "eth0" "tx rx" - ucidef_set_led_netdev "lan_link" "LAN Link" "$board:green:lan_link" "eth0" "link" - ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt" - ;; -rme-eg200) - ucidef_set_led_netdev "wan" "WAN" "eg200:red:eth0" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "eg200:red:wlan" "phy0tpt" - ucidef_set_led_oneshot "modbus" "Modbus" "eg200:red:modbus" "100" "33" - ucidef_set_led_default "etactica" "etactica" "eg200:red:etactica" "ignore" - ;; -rocket-m-ti) - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssiverylow" "RSSIVERYLOW" "ubnt:green:link1" "wlan0" "1" "100" - ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:green:link2" "wlan0" "18" "100" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:green:link3" "wlan0" "34" "100" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:green:link4" "wlan0" "51" "100" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:green:link5" "wlan0" "67" "100" - ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "ubnt:green:link6" "wlan0" "84" "100" - ;; -rut900) - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04" - ;; -smart-300) - ucidef_set_led_netdev "wan" "WAN" "nc-link:green:wan" "eth0" - ucidef_set_led_switch "lan1" "LAN1" "nc-link:green:lan1" "switch0" "0x04" - ucidef_set_led_switch "lan2" "LAN2" "nc-link:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "nc-link:green:lan3" "switch0" "0x10" - ucidef_set_led_switch "lan4" "LAN4" "nc-link:green:lan4" "switch0" "0x02" - ucidef_set_led_wlan "wlan" "WLAN" "nc-link:green:wlan" "phy0tpt" - ;; -som9331) - ucidef_set_led_netdev "wan" "WAN" "$board:orange:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "$board:orange:lan1" "switch0" "0x08" - ucidef_set_led_switch "lan2" "LAN2" "$board:orange:lan2" "switch0" "0x02" - ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt" - ucidef_set_led_usbport "usb" "USB" "$board:green:system" "usb1-port1" - ;; -sr3200) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt" - ;; -tellstick-znet-lite) - ucidef_set_led_netdev "lan_act" "LANACT" "tellstick:green:lan" "eth0" "tx rx" - ucidef_set_led_netdev "lan_link" "LANLINK" "tellstick:orange:lan" "eth0" "link" - ;; -tew-712br) - ucidef_set_led_netdev "wan" "WAN" "trendnet:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "trendnet:green:lan1" "switch0" "0x02" - ucidef_set_led_switch "lan2" "LAN2" "trendnet:green:lan2" "switch0" "0x04" - ucidef_set_led_switch "lan3" "LAN3" "trendnet:green:lan3" "switch0" "0x08" - ucidef_set_led_switch "lan4" "LAN4" "trendnet:green:lan4" "switch0" "0x10" - ucidef_set_led_wlan "wlan" "WLAN" "trendnet:green:wlan" "phy0tpt" - ;; -tew-732br) - ucidef_set_led_netdev "wan" "WAN" "trendnet:green:wan" "eth1" - ;; -tew-823dru) - ucidef_set_led_netdev "wan" "WAN" "trendnet:green:planet" "eth0" - ;; -tl-mr11u|\ -tl-mr3020|\ -tl-mr3040|\ -tl-mr3040-v2) - ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" - ;; -tl-mr3220|\ -tl-mr3420) - ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1" - ;; -tl-mr3220-v2|\ -tl-wr741nd-v4) - ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - - case "$board" in - tl-mr3220-v2) - ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1" - ;; - esac - ;; -tl-mr3420-v2|\ -tl-wr841n-v8|\ -tl-wr842n-v2|\ -tl-wr941nd-v5) - ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - - case "$board" in - tl-mr3420-v2|\ - tl-wr842n-v2) - ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1" - ;; - esac - ;; -tl-mr6400) - ucidef_set_led_netdev "lan" "LAN" "tp-link:white:lan" "eth0" - ucidef_set_led_netdev "wan" "WAN" "tp-link:white:wan" "eth1" - ucidef_set_led_netdev "4g" "4G" "tp-link:white:4g" "usb0" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:white:wlan" "phy0tpt" - ;; -tl-wa7210n-v2) - ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:signal1" "wlan0" "1" "100" "0" "13" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:signal2" "wlan0" "26" "100" "-25" "13" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:signal3" "wlan0" "51" "100" "-50" "13" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:signal4" "wlan0" "76" "100" "-75" "13" - ;; -tl-wa750re) - ucidef_set_led_netdev "lan" "LAN" "tp-link:orange:lan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:orange:wlan" "phy0tpt" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:orange:signal1" "wlan0" "1" "100" "0" "13" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:orange:signal2" "wlan0" "20" "100" "-19" "13" - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "tp-link:orange:signal3" "wlan0" "40" "100" "-39" "13" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:orange:signal4" "wlan0" "60" "100" "-59" "13" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:orange:signal5" "wlan0" "80" "100" "-79" "13" - ;; -tl-wa801nd-v3) - ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - ;; -tl-wa850re|\ -tl-wa850re-v2) - ucidef_set_led_netdev "lan" "LAN" "tp-link:blue:lan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:wlan" "phy0tpt" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:blue:signal1" "wlan0" "1" "100" "0" "13" - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:blue:signal2" "wlan0" "20" "100" "-19" "13" - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "tp-link:blue:signal3" "wlan0" "40" "100" "-39" "13" - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:blue:signal4" "wlan0" "60" "100" "-59" "13" - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:blue:signal5" "wlan0" "80" "100" "-79" "13" - ;; -tl-wa701nd-v2|\ -tl-wa801nd-v2|\ -tl-wa830re-v2|\ -tl-wa860re|\ -tl-wa901nd-v3|\ -tl-wa901nd-v4|\ -tl-wa901nd-v5) - ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - ;; -tl-wa901nd) - ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" - ;; -tl-wa901nd-v2|\ -tl-wr941nd|\ -tl-wr1041n-v2) - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - ;; -tl-wdr3320-v2) - ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:green:wlan5g" "phy0tpt" - ;; -tl-wdr3500) - ucidef_set_led_usbport "usb" "USB" "tp-link:green:usb" "usb1-port1" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:green:wlan2g" "phy0tpt" - ;; -tl-wdr4300) - ucidef_set_led_usbport "usb1" "USB1" "tp-link:green:usb1" "1-1-port1" - ucidef_set_led_usbport "usb2" "USB2" "tp-link:green:usb2" "1-1-port2" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy0tpt" - ;; -tl-wdr4900-v2) - ucidef_set_led_usbport "usb1" "USB1" "tp-link:green:usb1" "usb1-port1" - ucidef_set_led_usbport "usb2" "USB2" "tp-link:green:usb2" "usb2-port1" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:blue:wlan5g" "phy1tpt" - ;; -tl-wdr6500-v2|\ -tl-wr741nd) - ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x02" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x04" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x08" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x10" - ;; -tl-wpa8630) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ucidef_set_led_netdev "wlan" "WLAN" "$board:green:wlan" "wlan1" - ucidef_set_led_netdev "wlan5" "WLAN5" "$board:green:wlan5" "wlan0" - ;; -tl-wr740n-v6|\ -tl-wr841n-v9|\ -tl-wr841n-v11|\ -tl-wr842n-v3) - ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - - case "$board" in - tl-wr842n-v3) - ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1" - ;; - esac - ;; -tl-wr802n-v1) - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:system" "phy0tpt" - ;; -tl-wr802n-v2) - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:system" "phy0tpt" - ;; -tl-wr902ac-v1) - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt" - ;; -tl-wr940n-v4|\ -tl-wr941nd-v6) - ucidef_set_led_netdev "wan" "WAN" "tp-link:blue:wan" "eth0" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:blue:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:blue:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:blue:lan3" "switch0" "0x04" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:blue:lan4" "switch0" "0x02" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:wlan" "phy0tpt" - ;; -tl-wr840n-v2|\ -tl-wr840n-v3) - ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1" - ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - ;; -tl-wr940n-v6) - ucidef_set_led_netdev "wan" "WAN" "tp-link:blue:wan" "eth0" - ;; -tl-wr942n-v1) - ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x04" - ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x10" - ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02" - ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" - ucidef_set_led_usbport "usb1" "USB1" "$board:green:usb1" "1-1-port2" - ucidef_set_led_usbport "usb2" "USB2" "$board:green:usb2" "1-1-port1" - ;; -tl-wr1043nd|\ -tl-wr1043nd-v2) - ucidef_set_led_usbport "usb" "USB" "tp-link:green:usb" "usb1-port1" - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - ;; -tl-wr1043n-v5|\ -tl-wr1043nd-v4) - ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" - ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" - - case "$board" in - tl-wr1043nd-v4) - ucidef_set_led_usbport "usb" "USB" "tp-link:green:usb" "usb1-port1" - ;; - esac - ;; -tl-wr2543n) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:green:wlan2g" "phy0tpt" - ucidef_set_led_usbport "usb" "USB" "tp-link:green:usb" "usb1-port1" - ;; -tube2h) - ucidef_set_led_netdev "lan" "LAN" "alfa:blue:lan" "eth0" - ucidef_set_rssimon "wlan0" "200000" "1" - ucidef_set_led_rssi "signal1" "SIGNAL1" "alfa:red:signal1" "wlan0" "1" "100" "0" "13" - ucidef_set_led_rssi "signal2" "SIGNAL2" "alfa:orange:signal2" "wlan0" "26" "100" "-25" "13" - ucidef_set_led_rssi "signal3" "SIGNAL3" "alfa:green:signal3" "wlan0" "51" "100" "-50" "13" - ucidef_set_led_rssi "signal4" "SIGNAL4" "alfa:green:signal4" "wlan0" "76" "100" "-75" "13" - ;; -wam250) - ucidef_set_led_netdev "lan" "LAN" "$board:white:lan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "$board:white:wlan" "phy0tpt" - ;; -wndap360) - ucidef_set_led_power "power" "POWER GREEN" "netgear:green:power" "1" - ;; -wndr3700) - ucidef_set_led_default "wan" "WAN LED (green)" "netgear:green:wan" "0" - ucidef_set_led_usbport "usb" "USB" "netgear:green:usb" "usb1-port1" - ;; -wi2a-ac200i) - ucidef_set_led_default "power" "Power (green)" "nokia:green:power" "1" - ucidef_set_led_default "wan" "Ethernet LED (green)" "nokia:green:wan" "1" - ucidef_set_led_wlan "wlan5g" "WLAN" "nokia:green:wlan-5g" "phy0tpt" - ucidef_set_led_wlan "wlan2g" "WLAN" "nokia:green:wlan-2g" "phy1tpt" - ;; -wndr3700v4|\ -wndr4300) - ucidef_set_led_switch "wan-amber" "WAN (amber)" "netgear:amber:wan" "switch0" "0x20" - ucidef_set_led_usbport "usb" "USB" "netgear:green:usb" "usb1-port1" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "netgear:green:wlan2g" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "netgear:blue:wlan5g" "phy1tpt" - ;; -whr-g301n|\ -whr-hp-g300n|\ -whr-hp-gn) - ucidef_set_led_netdev "wan" "WAN" "buffalo:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "buffalo:green:lan1" "switch0" "0x02" - ucidef_set_led_switch "lan2" "LAN2" "buffalo:green:lan2" "switch0" "0x04" - ucidef_set_led_switch "lan3" "LAN3" "buffalo:green:lan3" "switch0" "0x08" - ucidef_set_led_switch "lan4" "LAN4" "buffalo:green:lan4" "switch0" "0x10" - ;; -wifi-pineapple-nano) - ucidef_set_led_wlan "wlan0" "WLAN0" "$board:blue:system" "phy0tpt" - ;; -wlae-ag300n) - ucidef_set_led_netdev "wireless" "WIRELESS" "buffalo:green:wireless" "wlan0" - ;; -wnr1000-v2|\ -wnr2000-v3) - ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0" - ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0" - ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt" - ucidef_set_led_switch "lan1green" "LAN1 (green)" "netgear:green:lan1" "switch0" "0x02" "0x04" - ucidef_set_led_switch "lan2green" "LAN2 (green)" "netgear:green:lan2" "switch0" "0x04" "0x04" - ucidef_set_led_switch "lan3green" "LAN3 (green)" "netgear:green:lan3" "switch0" "0x08" "0x04" - ucidef_set_led_switch "lan4green" "LAN4 (green)" "netgear:green:lan4" "switch0" "0x10" "0x04" - ucidef_set_led_switch "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "switch0" "0x02" "0x02" - ucidef_set_led_switch "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "switch0" "0x04" "0x02" - ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "switch0" "0x08" "0x02" - ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "switch0" "0x10" "0x02" - ;; -wnr2000-v4) - ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0" - ucidef_set_led_netdev "wlan" "WLAN" "netgear:blue:wlan" "wlan0" - ucidef_set_led_switch "lan1" "LAN1" "netgear:amber:lan1" "switch0" "0x02" - ucidef_set_led_switch "lan2" "LAN2" "netgear:amber:lan2" "switch0" "0x04" - ucidef_set_led_switch "lan3" "LAN3" "netgear:amber:lan3" "switch0" "0x08" - ucidef_set_led_switch "lan4" "LAN4" "netgear:amber:lan4" "switch0" "0x10" - ucidef_set_led_usbport "usb" "USB" "netgear:amber:status" "usb1-port1" - ;; -wnr2200) - ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0" - ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0" - ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt" - ucidef_set_led_switch "lan1green" "LAN1 (green)" "netgear:green:lan1" "switch0" "0x02" "0x04" - ucidef_set_led_switch "lan2green" "LAN2 (green)" "netgear:green:lan2" "switch0" "0x04" "0x04" - ucidef_set_led_switch "lan3green" "LAN3 (green)" "netgear:green:lan3" "switch0" "0x08" "0x04" - ucidef_set_led_switch "lan4green" "LAN4 (green)" "netgear:green:lan4" "switch0" "0x10" "0x04" - ucidef_set_led_switch "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "switch0" "0x02" "0x02" - ucidef_set_led_switch "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "switch0" "0x04" "0x02" - ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "switch0" "0x08" "0x02" - ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "switch0" "0x10" "0x02" - ucidef_set_led_usbport "usb" "USB" "netgear:green:usb" "usb1-port1" - ;; -wnr612-v2) - ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "netgear:green:wlan" "phy0tpt" - ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f" - ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f" - ;; -wpn824n) - ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0" - ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt" - ucidef_set_led_switch "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "switch0" "0x02" - ucidef_set_led_switch "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "switch0" "0x04" - ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "switch0" "0x08" - ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "switch0" "0x10" - ucidef_set_led_default "lan1green" "LAN1 (green)" "netgear:green:lan1" "0" - ucidef_set_led_default "lan2green" "LAN2 (green)" "netgear:green:lan2" "0" - ucidef_set_led_default "lan3green" "LAN3 (green)" "netgear:green:lan3" "0" - ucidef_set_led_default "lan4green" "LAN4 (green)" "netgear:green:lan4" "0" - ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0" - ucidef_set_led_default "wps1" "WPS1" "netgear:blue:wps1" "0" - ucidef_set_led_default "wps2" "WPS2" "netgear:blue:wps2" "0" - ucidef_set_led_default "status" "STATUS" "netgear:amber:status" "0" - ucidef_set_led_default "test" "TEST" "netgear:amber:test" "0" - ;; -wzr-hp-ag300h) - ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0" - ucidef_set_led_netdev "router" "ROUTER" "buffalo:green:router" "eth1" - ucidef_set_led_wlan "wlan2g" "WLAN2G" "buffalo:amber:band2g" "phy0tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "buffalo:amber:band5g" "phy1tpt" - ucidef_set_led_usbport "usb" "USB" "buffalo:green:usb" "usb1-port1" - ;; -wzr-hp-g300nh) - ucidef_set_led_wlan "wlan" "Wireless" "buffalo:green:wireless" "phy0tpt" - ucidef_set_led_netdev "router" "Router" "buffalo:green:router" "eth1" - ucidef_set_led_usbport "usb" "USB" "buffalo:blue:usb" "usb1-port1" - ;; -wzr-hp-g300nh2|\ -wzr-hp-g450h) - ucidef_set_led_wlan "wlan" "Wireless" "buffalo:green:wireless" "phy0tpt" - ;; -xd3200) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:blue:wlan2g" "phy1tpt" - ;; -z1) - ucidef_set_led_netdev "wlan1" "WLAN1" "$board:blue:tricolor0" "wlan1" - ;; -zcn-1523h-2) - ucidef_set_led_netdev "lan1" "lan1" "zcn-1523h:green:lan1" "eth0" - ;; -zcn-1523h-5) - ucidef_set_led_netdev "lan1" "lan1" "zcn-1523h:green:lan1" "eth0" - ucidef_set_led_netdev "lan2" "lan2" "zcn-1523h:green:lan2" "eth1" - ;; -esac - -board_config_flush - -exit 0 diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network deleted file mode 100755 index 1487ff58de..0000000000 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ /dev/null @@ -1,711 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2011-2015 OpenWrt.org -# - -. /lib/functions/system.sh -. /lib/functions/uci-defaults.sh - -ar71xx_setup_interfaces() -{ - local board="$1" - - case "$board" in - airgatewaypro) - ucidef_add_switch "switch0" \ - "0@eth0" "4:lan" "5:wan" - ;; - airrouter|\ - ap121|\ - ap121-mini|\ - ap96|\ - dir-600-a1|\ - dir-615-c1|\ - dir-615-e1|\ - dir-615-e4|\ - hiwifi-hc6361|\ - ja76pf|\ - mc-mac1200r|\ - minibox-v1|\ - mynet-n600|\ - oolite-v1|\ - oolite-v5.2|\ - oolite-v5.2-dev|\ - qihoo-c301|\ - r602n|\ - rb-750|\ - rb-751|\ - som9331|\ - t830|\ - tew-632brp|\ - tew-712br|\ - tew-732br|\ - tl-mr3220|\ - tl-mr3420|\ - tl-wdr3320-v2|\ - tl-wdr3500|\ - tl-wr740n-v6|\ - tl-wr840n-v2|\ - tl-wr840n-v3|\ - tl-wr841n-v11|\ - tl-wr841n-v9|\ - tl-wr842n-v3|\ - whr-g301n|\ - whr-hp-g300n|\ - whr-hp-gn|\ - wzr-hp-ag300h|\ - zbt-we1526) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" - ;; - alfa-ap120c|\ - all0305|\ - antminer-s1|\ - antminer-s3|\ - antrouter-r1|\ - ap121f|\ - ap91-5g|\ - aw-nr580|\ - bullet-m|\ - bullet-m-xw|\ - c-55|\ - cap324|\ - cap4200ag|\ - cf-e380ac-v1|\ - cf-e380ac-v2|\ - cpe210-v2|\ - cpe210-v3|\ - cpe510-v2|\ - dr342|\ - eap120|\ - eap300v2|\ - eap7660d|\ - el-mini|\ - fritz300e|\ - fritz450e|\ - gl-usb150|\ - hiveap-121|\ - koala|\ - lbe-m5|\ - loco-m-xw|\ - mr12|\ - mr16|\ - mr1750|\ - mr1750v2|\ - mr18|\ - mr600|\ - mr600v2|\ - mr900|\ - mr900v2|\ - mynet-rext|\ - pqi-air-pen|\ - rb-411|\ - rb-411u|\ - rb-911-2hn|\ - rb-911-5hn|\ - rb-911g-2hpnd|\ - rb-911g-5hpacd|\ - rb-911g-5hpnd|\ - rb-912uag-2hpnd|\ - rb-912uag-5hpnd|\ - rb-921gs-5hpacd-r2|\ - rb-922uags-5hpacd|\ - rb-lhg-5nd|\ - rb-mapl-2nd|\ - rb-sxt2n|\ - rb-sxt-2nd-r3|\ - rb-sxt5n|\ - rb-wap-2nd|\ - rb-wapr-2nd|\ - rb-wapg-5hact2hnd|\ - re355|\ - re450|\ - rocket-m-xw|\ - sc300m |\ - tl-mr10u|\ - tl-mr11u|\ - tl-mr12u|\ - tl-mr13u|\ - tl-mr3020|\ - tl-mr3040|\ - tl-mr3040-v2|\ - tl-wa701nd-v2|\ - tl-wa7210n-v2|\ - tl-wa750re|\ - tl-wa801nd-v2|\ - tl-wa830re-v2|\ - tl-wa850re|\ - tl-wa850re-v2|\ - tl-wa855re-v1|\ - tl-wa901nd|\ - tl-wa901nd-v2|\ - tl-wa901nd-v3|\ - tl-wa901nd-v4|\ - tl-wa901nd-v5|\ - tl-wr703n|\ - tl-wr802n-v1|\ - tl-wr802n-v2|\ - tl-wr902ac-v1|\ - ts-d084|\ - tube2h|\ - unifi|\ - unifiac-lite|\ - wi2a-ac200i|\ - wifi-pineapple-nano|\ - wndap360|\ - wp543) - ucidef_set_interface_lan "eth0" - ;; - a40|\ - a60|\ - alfa-ap96|\ - alfa-nx|\ - dr344|\ - gl-ar150|\ - gl-ar300m|\ - gl-domino|\ - gl-inet|\ - gl-mifi|\ - jwap003|\ - om2p-hsv4|\ - om2pv4|\ - pb42|\ - pb44|\ - rb-951ui-2hnd|\ - routerstation|\ - tl-wr710n|\ - tl-wr720n-v3|\ - tl-wr810n|\ - tl-wr810n-v2|\ - wpe72|\ - wrtnode2q) - ucidef_set_interfaces_lan_wan "eth1" "eth0" - ;; - all0258n|\ - all0315n|\ - dlan-hotspot|\ - dlan-pro-500-wp|\ - ja76pf2|\ - rocket-m-ti|\ - ubnt-unifi-outdoor) - ucidef_set_interface_lan "eth0 eth1" - ;; - wzr-hp-g300nh2) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "2:wan" - ;; - ap132|\ - ap136|\ - ap152|\ - rb-750gl|\ - rb-751g|\ - rb-951g-2hnd|\ - rb-962uigs-5hact2hnt|\ - wlr8100|\ - wzr-hp-g450h) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" - ;; - ap135-020|\ - ap136-020|\ - bhr-4grv2|\ - tew-823dru|\ - tl-wr1043nd-v2|\ - wzr-450hp2) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2" - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0" - ;; - ap136-010|\ - ap147-010|\ - nbg6616|\ - nbg6716) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1" - ;; - ap143|\ - rb-433|\ - rb-433u) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "5@eth1" - ;; - archer-c5|\ - archer-c7|\ - tl-wdr4900-v2) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2" - ucidef_add_switch "switch0" \ - "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan" - ;; - archer-c25-v1|\ - archer-c60-v1|\ - archer-c60-v2|\ - rb-750-r2|\ - rb-750p-pbr2|\ - rb-750up-r2|\ - rb-951ui-2nd|\ - rb-952ui-5ac2nd) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" - ;; - archer-c58-v1|\ - archer-c59-v1|\ - archer-c59-v2|\ - fritz4020|\ - rb-450g) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2" - ;; - arduino-yun|\ - dir-505-a1|\ - tl-wa801nd-v3) - ucidef_set_interface_lan "eth1" - ;; - bsb) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan" "3:lan" - ;; - c-60) - ucidef_add_switch "switch0" \ - "0@eth0" "3:wan" "4:lan" - ;; - rme-eg200) - ucidef_set_interface_lan "eth0" "dhcp" - ;; - cf-e375ac|\ - rb-map-2nd) - ucidef_add_switch "switch0" \ - "0@eth0" "1:wan" "2:lan" - ;; - cf-e385ac) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2" - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan" "1:wan" "6@eth1" - ;; - cpe210|\ - cpe510|\ - wbs210|\ - wbs510) - ucidef_add_switch "switch0" \ - "0@eth0" "5:lan" "4:wan" - ;; - cr3000) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2" - ;; - cr5000|\ - dgl-5500-a1|\ - dhp-1565-a1|\ - dir-825-c1|\ - dir-835-a1|\ - esr900|\ - mynet-n750|\ - sr3200) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" - ;; - tl-wr1043n-v5) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" - ;; - dap-2695-a1) - ucidef_add_switch "switch0" "0@eth0" "2:lan" "3:wan" "6@eth1" - ;; - rb-931-2nd) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:3" "2:lan:2" "3:wan:1" - ;; - rb-941-2nd) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:wan:1" - ;; - db120|\ - rb-2011il|\ - rb-2011ils|\ - rb-2011l|\ - rb-2011uas|\ - rb-2011uas-2hnd|\ - rb-2011uias|\ - rb-2011uias-2hnd|\ - rb-2011uias-2hnd-r2) - case "$board" in - rb-2011ils|\ - rb-2011uas*|\ - rb-2011uias|\ - rb-2011uias-2hnd|\ - rb-2011uias-2hnd-r2) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" "6:sfp" - ;; - *) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" - ;; - esac - - ucidef_add_switch "switch1" \ - "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" - ;; - dir-615-i1|\ - omy-g1|\ - r6100|\ - smart-300|\ - tl-wdr6500-v2|\ - tl-wr940n-v4|\ - tl-wr940n-v6|\ - tl-wr941nd-v6|\ - wnr1000-v2|\ - wnr2000-v4|\ - wnr2200|\ - wnr612-v2|\ - wpn824n) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" - ;; - tl-mr6400) - ucidef_set_interfaces_lan_wan "eth0.1 eth1" "usb0" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:lan" "3:lan" - ;; - dir-825-b1|\ - nbg460n_550n_550nh|\ - tew-673gru|\ - wzr-hp-g300nh) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0" - ;; - dlan-pro-1200-ac) - ucidef_set_interface_lan "eth0" - ucidef_add_switch "switch0" \ - "0u@eth0" "2:lan" "3:lan" "4:lan" - ucidef_add_switch_attr "switch0" "enable" "false" - ;; - e1700ac-v2|\ - e750g-v8|\ - unifiac-pro|\ - xd3200) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan" "3:wan" - ;; - e558-v2) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2" - ucidef_add_switch "switch0" \ - "0@eth1" "4:lan" "5:lan" "6@eth0" "3:wan" - ;; - ebr-2310-c1) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" - ;; - el-m150) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "3@eth1" - ;; - dir-869-a1|\ - epg5000|\ - esr1750|\ - tl-wr1043nd-v4|\ - wndr3700v4|\ - wndr4300) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" - ;; - ew-balin) - ucidef_set_interface "usb2" ifname "usb0" protocol "static" - ucidef_add_switch "switch0" \ - "0@eth0" "5:lan:4" "4:lan:5" "3:wan" - ;; - ew-dorin) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:lan" "3:wan" - ;; - ew-dorin-router) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan" "3:lan" - ;; - dw33d|\ - f9k1115v2) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2" - ucidef_add_switch "switch0" \ - "2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" "0@eth0" "1:wan" - ;; - gl-ar300|\ - wnr2000-v3) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" - ;; - gl-ar750|\ - rb-435g) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan" "2:lan" - ;; - gl-ar750s) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan:2" "3:lan:1" "1:wan" - ;; - jwap230) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "5:wan" "6@eth1" - ;; - nanostation-m-xw) - ucidef_add_switch "switch0" \ - "0@eth0" "5:lan" "1:wan" - ;; - onion-omega) - ucidef_set_interface_lan "wlan0" - ;; - rb-450) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth1" - ;; - routerstation-pro) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "2:lan:3" "3:lan:2" "4:lan:1" - ;; - rb-493g) - ucidef_set_interfaces_lan_wan "eth0.1 eth1.1" "eth1.2" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3" - ucidef_add_switch "switch1" \ - "0@eth1" "1:lan:4" "2:lan:1" "3:lan:3" "4:lan:2" "5:wan" - ;; - rut900) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" - ;; - tellstick-znet-lite) - ucidef_set_interface_wan "eth0" - ucidef_set_interface "wlan" ifname "wlan0" protocol "dhcp" - ;; - tl-mr3420-v2|\ - tl-wr841n-v8|\ - tl-wr842n-v2|\ - tl-wr941nd-v5|\ - tl-wr942n-v1) - ucidef_set_interfaces_lan_wan "eth1.1" "eth0" - ucidef_add_switch "switch0" \ - "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3" - ;; - archer-c7-v4|\ - archer-c7-v5|\ - tl-wdr4300|\ - tl-wr1041n-v2) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan" - ;; - tl-wpa8630) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4" - ;; - tl-wr1043nd) - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0" - ;; - tl-wr2543n) - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0" - ;; - tl-mr3220-v2|\ - tl-wr741nd-v4) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3" - ;; - tl-wr841n-v1|\ - tl-wr941nd) - ucidef_set_interface "eth" ifname "eth0" - ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" - ;; - tl-wr741nd|\ - tl-wr841n-v7) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" - ;; - uap-pro|\ - wpj342) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:wan" - ;; - wndr3700|\ - wndr3700v2|\ - wndr3800|\ - wndr3800ch) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0" - - ucidef_add_switch_attr "switch0" "blinkrate" 2 - ucidef_add_switch_port_attr "switch0" 1 led 6 - ucidef_add_switch_port_attr "switch0" 2 led 9 - ucidef_add_switch_port_attr "switch0" 5 led 2 - ;; - wpj344) - ucidef_add_switch "switch0" \ - "0@eth0" "3:lan" "2:wan" - ;; - wpj558) - ucidef_add_switch "switch0" \ - "5:lan" "1:wan" "6@eth0" - ;; - wpj563) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan" "3:wan" - ;; - wrt160nl) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4@eth0" - ;; - wzr-hp-g450h) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan:1 3:lan:2 4:lan:3 5:lan:4" "1:wan" - ;; - z1) - ucidef_set_interfaces_lan_wan "eth0.1" "eth1" - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" "5:wan" - ;; - ens202ext) - ucidef_set_interfaces_lan_wan "eth1.1" "eth1.2" - ucidef_add_switch "switch0" \ - "0@eth1" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan" - ;; - *) - ucidef_set_interfaces_lan_wan "eth0" "eth1" - ;; - esac -} - -ar71xx_setup_macs() -{ - local board="$1" - local lan_mac="" - local wan_mac="" - - case $board in - archer-c7-v4) - base_mac=$(mtd_get_mac_binary config 0x8) - wan_mac=$(macaddr_add "$base_mac" 1) - ;; - archer-c7-v5) - base_mac=$(mtd_get_mac_binary info 0x8) - wan_mac=$(macaddr_add "$base_mac" 1) - ;; - dgl-5500-a1|\ - dir-825-c1) - wan_mac=$(mtd_get_mac_ascii nvram "wan_mac") - ;; - dhp-1565-a1|\ - dir-835-a1|\ - wndr3700v4|\ - wndr4300) - lan_mac=$(mtd_get_mac_binary caldata 0x0) - wan_mac=$(mtd_get_mac_binary caldata 0x6) - ;; - dir-869-a1|\ - mynet-n750) - wan_mac=$(mtd_get_mac_ascii devdata "wanmac") - ;; - esr900) - wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr") - ;; - fritz300e) - lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)")) - ;; - tl-wdr4300) - base_mac=$(mtd_get_mac_binary u-boot 0x1fc00) - wan_mac=$(macaddr_add "$base_mac" 1) - ;; - tl-wr1043n-v5|\ - tl-wr1043nd-v4) - lan_mac=$(mtd_get_mac_binary product-info 0x8) - wan_mac=$(macaddr_add "$lan_mac" 1) - ;; - wlr8100) - lan_mac=$(mtd_get_mac_ascii u-boot-env "ethaddr") - wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr") - ;; - wpj344|\ - wpj558) - wan_mac=$(mtd_get_mac_binary u-boot 0x2e018) - ;; - esac - - [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac - [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac -} - -ar71xx_setup_ar8xxx_switch() -{ - local board="$1" - - case $board in - ap147-010|\ - archer-c25-v1|\ - archer-c58-v1|\ - archer-c59-v1|\ - archer-c59-v2|\ - archer-c60-v1|\ - archer-c60-v2|\ - archer-c7-v4|\ - archer-c7-v5|\ - cf-e375ac|\ - cf-e385ac|\ - cr3000|\ - dhp-1565-a1|\ - mynet-n600|\ - rb-2011il|\ - rb-2011ils|\ - rb-2011l|\ - rb-2011uas|\ - rb-2011uas-2hnd|\ - rb-2011uias|\ - rb-2011uias-2hnd|\ - rb-2011uias-2hnd-r2|\ - rb-750|\ - rb-750p-pbr2|\ - rb-750-r2|\ - rb-750up-r2|\ - rb-951ui-2nd|\ - rb-952ui-5ac2nd|\ - rb-map-2nd|\ - tl-wr1043nd-v4|\ - tl-wr1043n-v5|\ - wndr3700v4|\ - wndr3700v4|\ - wndr4300|\ - wnr1000-v2|\ - wnr2000-v3|\ - wnr2200|\ - wnr612-v2|\ - wpn824n) - ucidef_set_ar8xxx_switch_mib "switch0" 0 500 - ;; - esac -} - -board_config_update -board=$(board_name) -ar71xx_setup_interfaces $board -ar71xx_setup_macs $board -ar71xx_setup_ar8xxx_switch $board -board_config_flush - -exit 0 diff --git a/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches b/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches deleted file mode 100755 index 3bb2f635a3..0000000000 --- a/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches +++ /dev/null @@ -1,42 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2015 OpenWrt.org -# - -. /lib/functions/uci-defaults.sh - -board_config_update - -board=$(board_name) - -case "$board" in -cpe210|\ -cpe510|\ -wbs210|\ -wbs510) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20" - ;; -nanostation-m) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "8" - ;; -nanostation-m-xw) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "2" - ;; -rb-912uag-2hpnd|\ -rb-912uag-5hpnd) - ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "61" "1" - ;; -rb-750up-r2|\ -rb-951ui-2nd|\ -rb-952ui-5ac2nd) - ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "45" "1" - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "14" - ;; -rb-750p-pbr2) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "14" - ;; -esac - -board_config_flush - -exit 0 diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh deleted file mode 100644 index 1a92ad927d..0000000000 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ /dev/null @@ -1,599 +0,0 @@ -#!/bin/sh -# Copyright (C) 2009-2013 OpenWrt.org - -. /lib/functions.sh -. /lib/functions/leds.sh - -get_status_led() { - local board=$(board_name) - - case $board in - a40) - status_led="a40:green:status" - ;; - a60) - status_led="a60:green:status" - ;; - alfa-nx) - status_led="alfa:green:led_8" - ;; - all0305) - status_led="eap7660d:green:ds4" - ;; - antminer-s1|\ - antminer-s3|\ - antminer-r1|\ - e1700ac-v2|\ - e558-v2|\ - e600gac-v2|\ - e750a-v4|\ - e750g-v8|\ - eap120|\ - minibox-v1|\ - minibox-v3.2|\ - packet-squirrel|\ - som9331|\ - sr3200|\ - tl-wr802n-v2|\ - xd3200) - status_led="$board:green:system" - ;; - ap121f) - status_led="$board:green:vpn" - ;; - ap132|\ - ap531b0|\ - cpe505n|\ - db120|\ - dr342|\ - dr344|\ - rut900|\ - tew-632brp|\ - tl-wr942n-v1|\ - wpj344|\ - zbt-we1526) - status_led="$board:green:status" - ;; - ap136-010|\ - ap136-020) - status_led="ap136:green:status" - ;; - ap147-010) - status_led="ap147:green:status" - ;; - ap135-020) - status_led="ap135:green:status" - ;; - archer-c25-v1|\ - archer-c58-v1|\ - archer-c59-v1|\ - archer-c59-v2|\ - archer-c60-v1|\ - archer-c60-v2|\ - archer-c7-v4|\ - archer-c7-v5|\ - fritz300e|\ - fritz4020|\ - fritz450e|\ - gl-ar750s|\ - gl-usb150|\ - mr12|\ - mr16|\ - nbg6616|\ - sc1750|\ - sc450|\ - tl-wpa8630|\ - tl-wr902ac-v1) - status_led="$board:green:power" - ;; - tl-mr10u|\ - tl-mr12u|\ - tl-mr13u|\ - tl-wdr4300|\ - tl-wdr4900-v2|\ - tl-wr703n|\ - tl-wr710n|\ - tl-wr720n-v3|\ - tl-wr802n-v1|\ - tl-wr810n|\ - tl-wr810n-v2|\ - tl-wr940n-v4|\ - tl-wr941nd-v6) - status_led="tp-link:blue:system" - ;; - ap90q|\ - cpe830|\ - cpe870|\ - gl-ar300m|\ - gl-inet|\ - gl-mifi) - status_led="$board:green:lan" - ;; - ap91-5g|\ - n5q) - status_led="$board:green:signal4" - ;; - ap96) - status_led="$board:green:led2" - ;; - aw-nr580) - status_led="$board:green:ready" - ;; - bhr-4grv2|\ - wzr-hp-ag300h|\ - wzr-hp-g300nh2) - status_led="buffalo:red:diag" - ;; - bsb) - status_led="$board:red:sys" - ;; - bullet-m|\ - bullet-m-xw|\ - loco-m-xw|\ - nano-m|\ - nanostation-m|\ - nanostation-m-xw|\ - rocket-m|\ - rocket-m-xw) - status_led="ubnt:green:link4" - ;; - bxu2000n-2-a1) - status_led="bhu:green:status" - ;; - cap324) - status_led="pcs:green:power" - ;; - c-55|\ - c-60) - status_led="$board:green:pwr" - ;; - cap4200ag) - status_led="senao:green:pwr" - ;; - cf-e316n-v2|\ - cf-e520n|\ - cf-e530n) - status_led="$board:blue:wan" - ;; - cf-e320n-v2) - status_led="$board:blue:wlan" - ;; - cf-e375ac|\ - cf-e380ac-v1|\ - cf-e380ac-v2|\ - cf-e385ac) - status_led="$board:blue:wlan2g" - ;; - cpe510) - status_led="tp-link:green:link4" - ;; - cr3000|\ - cr5000) - status_led="pcs:amber:power" - ;; - dap-1330-a1|\ - dgl-5500-a1|\ - dhp-1565-a1|\ - dir-505-a1|\ - dir-600-a1|\ - dir-615-e1|\ - dir-615-i1|\ - dir-615-e4) - status_led="d-link:green:power" - ;; - dir-615-c1) - status_led="d-link:green:status" - ;; - dir-825-b1) - status_led="d-link:orange:power" - ;; - dir-825-c1|\ - dir-835-a1) - status_led="d-link:amber:power" - ;; - dir-869-a1) - status_led="d-link:white:status" - ;; - dlan-hotspot) - status_led="devolo:green:wifi" - ;; - dlan-pro-500-wp) - status_led="devolo:green:wlan-2g" - ;; - dlan-pro-1200-ac) - status_led="devolo:status:wlan" - ;; - dr531) - status_led="$board:green:sig4" - ;; - dragino2|\ - oolite-v1) - status_led="$board:red:system" - ;; - dw33d|\ - r36a) - status_led="$board:blue:status" - ;; - e600g-v2|\ - oolite-v5.2-dev|\ - ts-d084|\ - wifi-pineapple-nano) - status_led="$board:blue:system" - ;; - eap300v2) - status_led="engenius:blue:power" - ;; - ens202ext|\ - esr900) - status_led="engenius:amber:power" - ;; - eap7660d) - status_led="$board:green:ds4" - ;; - el-m150|\ - el-mini) - status_led="easylink:green:system" - ;; - ew-balin) - status_led="balin:green:status" - ;; - ew-dorin|\ - ew-dorin-router) - status_led="dorin:green:status" - ;; - f9k1115v2) - status_led="belkin:blue:status" - ;; - epg5000|\ - esr1750) - status_led="$board:amber:power" - ;; - gl-ar750|\ - hiveap-121|\ - nbg6716|\ - wam250) - status_led="$board:white:power" - ;; - hiwifi-hc6361) - status_led="hiwifi:blue:system" - ;; - hornet-ub|\ - hornet-ub-x2) - status_led="alfa:blue:wps" - ;; - ja76pf|\ - ja76pf2) - status_led="jjplus:green:led1" - ;; - jwap230) - status_led="$board:green:led1" - ;; - koala) - status_led="$board:blue:sys" - ;; - lan-turtle) - status_led="$board:orange:system" - ;; - lbe-m5) - status_led="ubnt:green:sys" - ;; - ls-sr71) - status_led="ubnt:green:d22" - ;; - mc-mac1200r) - status_led="mercury:green:system" - ;; - mr18|\ - z1) - status_led="$board:green:tricolor0" - ;; - mr600) - status_led="$board:orange:power" - ;; - mr600v2) - status_led="mr600:blue:power" - ;; - mr1750|\ - mr1750v2) - status_led="mr1750:blue:power" - ;; - mr900|\ - mr900v2) - status_led="mr900:blue:power" - ;; - mynet-n600|\ - mynet-n750|\ - mynet-rext) - status_led="wd:blue:power" - ;; - mzk-w04nu|\ - mzk-w300nh) - status_led="planex:green:status" - ;; - nbg460n_550n_550nh) - status_led="nbg460n:green:power" - ;; - om2p|\ - om2p-hs|\ - om2p-hsv2|\ - om2p-hsv3|\ - om2p-hsv4|\ - om2p-lc|\ - om2pv2|\ - om2pv4) - status_led="om2p:blue:power" - ;; - om5p|\ - om5p-an) - status_led="om5p:blue:power" - ;; - om5p-ac|\ - om5p-acv2) - status_led="om5pac:blue:power" - ;; - omy-g1) - status_led="omy:green:wlan" - ;; - omy-x1) - status_led="omy:green:power" - ;; - onion-omega) - status_led="onion:amber:system" - ;; - pb44) - status_led="$board:amber:jump1" - ;; - r602n) - status_led="$board:green:wan" - ;; - rb-2011il|\ - rb-2011ils|\ - rb-2011l|\ - rb-2011uas|\ - rb-2011uas-2hnd) - status_led="rb:green:usr" - ;; - rb-411|\ - rb-411u|\ - rb-433|\ - rb-433u|\ - rb-450|\ - rb-450g|\ - rb-493) - status_led="rb4xx:yellow:user" - ;; - rb-750) - status_led="rb750:green:act" - ;; - rb-750-r2|\ - rb-750p-pbr2|\ - rb-750up-r2|\ - rb-911-2hn|\ - rb-911-5hn|\ - rb-911g-2hpnd|\ - rb-911g-5hpacd|\ - rb-911g-5hpnd|\ - rb-931-2nd|\ - rb-941-2nd|\ - rb-951ui-2nd|\ - rb-952ui-5ac2nd|\ - rb-962uigs-5hact2hnt|\ - rb-lhg-5nd|\ - rb-map-2nd|\ - rb-mapl-2nd|\ - rb-sxt-2nd-r3|\ - rb-wap-2nd|\ - rb-wapr-2nd) - status_led="rb:green:user" - ;; - rb-951ui-2hnd) - status_led="rb:green:act" - ;; - rb-912uag-2hpnd|\ - rb-912uag-5hpnd|\ - rb-sxt2n|\ - rb-sxt5n|\ - rb-wapg-5hact2hnd) - status_led="rb:green:power" - ;; - re355|\ - re450|\ - sc300m) - status_led="$board:blue:power" - ;; - rocket-m-ti) - status_led="ubnt:green:link6" - ;; - routerstation|\ - routerstation-pro) - status_led="ubnt:green:rf" - ;; - rw2458n) - status_led="$board:green:d3" - ;; - smart-300) - status_led="nc-link:green:system" - ;; - qihoo-c301) - status_led="qihoo:green:status" - ;; - t830) - status_led="$board:green:usb" - ;; - tellstick-znet-lite) - status_led="tellstick:white:system" - ;; - tew-673gru) - status_led="trendnet:blue:wps" - ;; - tew-712br|\ - tew-732br|\ - tew-823dru) - status_led="trendnet:green:power" - ;; - tl-mr3020|\ - tl-wr2543n) - status_led="tp-link:green:wps" - ;; - tl-wa750re) - status_led="tp-link:orange:re" - ;; - tl-wa850re|\ - tl-wa850re-v2) - status_led="tp-link:blue:re" - ;; - tl-wa855re-v1|\ - tl-wa860re) - status_led="tp-link:green:power" - ;; - tl-mr6400) - status_led="tp-link:white:power" - ;; - archer-c5|\ - archer-c7|\ - tl-mr3220|\ - tl-mr3220-v2|\ - tl-mr3420|\ - tl-mr3420-v2|\ - tl-wa701nd-v2|\ - tl-wa801nd-v2|\ - tl-wa801nd-v3|\ - tl-wa830re-v2|\ - tl-wa901nd|\ - tl-wa901nd-v2|\ - tl-wa901nd-v3|\ - tl-wa901nd-v4|\ - tl-wa901nd-v5|\ - tl-wdr3320-v2|\ - tl-wdr3500|\ - tl-wr1041n-v2|\ - tl-wr1043n-v5|\ - tl-wr1043nd|\ - tl-wr1043nd-v2|\ - tl-wr1043nd-v4|\ - tl-wr740n-v6|\ - tl-wr741nd|\ - tl-wr741nd-v4|\ - tl-wr840n-v2|\ - tl-wr840n-v3|\ - tl-wr841n-v1|\ - tl-wr841n-v7|\ - tl-wr841n-v8|\ - tl-wr841n-v11|\ - tl-wr842n-v2|\ - tl-wr842n-v3|\ - tl-wr941nd|\ - tl-wr941nd-v5) - status_led="tp-link:green:system" - ;; - tl-wr841n-v9) - status_led="tp-link:green:qss" - ;; - tl-wr940n-v6) - status_led="tp-link:orange:diag" - ;; - tl-wdr6500-v2) - status_led="tp-link:white:system" - ;; - tube2h) - status_led="alfa:green:signal4" - ;; - unifi) - status_led="ubnt:green:dome" - ;; - uap-pro|\ - unifiac-lite|\ - unifiac-pro) - status_led="ubnt:white:dome" - ;; - unifi-outdoor-plus) - status_led="ubnt:white:front" - ;; - airgateway|\ - airgatewaypro) - status_led="ubnt:white:status" - ;; - wi2a-ac200i) - status_led="nokia:green:ctrl" - ;; - whr-g301n|\ - whr-hp-g300n|\ - whr-hp-gn|\ - wzr-hp-g300nh) - status_led="buffalo:green:router" - ;; - wlae-ag300n) - status_led="buffalo:green:status" - ;; - r6100|\ - wndap360|\ - wndr3700|\ - wndr3700v4|\ - wndr4300|\ - wnr2000|\ - wnr2000-v3|\ - wnr2200|\ - wnr612-v2|\ - wnr1000-v2|\ - wpn824n) - status_led="netgear:green:power" - ;; - wp543) - status_led="$board:green:diag" - ;; - wpj342|\ - wpj531|\ - wpj558) - status_led="$board:green:sig3" - ;; - wpj563) - status_led="$board:green:sig1" - ;; - wrt160nl|\ - wrt400n) - status_led="$board:blue:wps" - ;; - zcn-1523h-2|\ - zcn-1523h-5) - status_led="zcn-1523h:amber:init" - ;; - wlr8100) - status_led="sitecom:amber:status" - ;; - esac -} - -set_state() { - get_status_led - - case "$1" in - preinit) - status_led_blink_preinit - ;; - failsafe) - status_led_blink_failsafe - ;; - preinit_regular) - status_led_blink_preinit_regular - ;; - upgrade) - status_led_blink_preinit_regular - ;; - done) - status_led_on - case $(board_name) in - gl-ar300m|\ - gl-ar750) - fw_printenv lc >/dev/null 2>&1 && fw_setenv "bootcount" 0 - ;; - qihoo-c301) - local n=$(fw_printenv activeregion | cut -d = -f 2) - fw_setenv "image${n}trynum" 0 - ;; - wi2a-ac200i) - fw_setenv PKRstCnt 0 - ;; - esac - ;; - esac -} diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom deleted file mode 100644 index 8fe57c87cc..0000000000 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ /dev/null @@ -1,178 +0,0 @@ -#!/bin/sh - -[ -e /lib/firmware/$FIRMWARE ] && exit 0 - -. /lib/functions.sh -. /lib/functions/system.sh - -ath9k_eeprom_die() { - echo "ath9k eeprom: " "$*" - exit 1 -} - -ath9k_eeprom_extract() { - local part=$1 - local offset=$(($2)) - local count=$(($3)) - local mtd - - mtd=$(find_mtd_chardev $part) - [ -n "$mtd" ] || \ - ath9k_eeprom_die "no mtd device found for partition $part" - - dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath9k_eeprom_die "failed to extract from $mtd" -} - -ath9k_ubi_eeprom_extract() { - local part=$1 - local offset=$(($2)) - local count=$(($3)) - local ubidev=$(nand_find_ubi $CI_UBIPART) - local ubi - - ubi=$(nand_find_volume $ubidev $part) - [ -n "$ubi" ] || \ - ath9k_eeprom_die "no UBI volume found for $part" - - dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath9k_eeprom_die "failed to extract from $ubi" -} - -ath9k_eeprom_extract_reverse() { - local part=$1 - local offset=$2 - local count=$(($3)) - local mtd - local reversed - local caldata - - mtd=$(find_mtd_chardev "$part") - reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd) - - for byte in $reversed; do - caldata="\x${byte}${caldata}" - done - - printf "%b" "$caldata" > /lib/firmware/$FIRMWARE -} - -ath9k_patch_firmware_mac() { - local mac=$1 - - [ -z "$mac" ] && return - - macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc oflag=seek_bytes bs=6 seek=2 count=1 -} - -board=$(board_name) - -case "$FIRMWARE" in -"soc_wmac.eeprom") - case $board in - c-55|\ - c-60) - ath9k_eeprom_extract "art" 0x1000 0x800 - ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1) - ;; - fritz4020|\ - fritz450e) - ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440 - ;; - mr18) - . /lib/upgrade/nand.sh - - if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 0x1000 0x800 - else - ath9k_eeprom_extract "odm-caldata" 0x1000 0x800 - fi - ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +1) - ;; - r6100 | \ - wndr3700v4 | \ - wndr4300) - ath9k_eeprom_extract "caldata" 0x1000 0x800 - ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0x0) - ;; - rambutan) - ath9k_eeprom_extract "art" 0x1000 0x800 - ;; - wlr8100) - ath9k_eeprom_extract "art" 0x1000 0x800 - ath9k_patch_firmware_mac $(mtd_get_mac_ascii u-boot-env "ethaddr") - ;; - z1) - . /lib/upgrade/nand.sh - - if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 0x1000 0x800 - else - ath9k_eeprom_extract "origcaldata" 0x1000 0x800 - fi - ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +2) - ;; - *) - ath9k_eeprom_die "board $board is not supported yet" - ;; - esac - ;; - -"pci_wmac0.eeprom") - case $board in - c-55) - ath9k_eeprom_extract "art" 0x5000 0x800 - ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2) - ;; - fritz300e) - ath9k_eeprom_extract_reverse "urloader" 0x1541 0x440 - ;; - mr18) - . /lib/upgrade/nand.sh - - if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 0x5000 0x800 - else - ath9k_eeprom_extract "odm-caldata" 0x5000 0x800 - fi - ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +2) - ;; - wndr3700v4 | \ - wndr4300) - ath9k_eeprom_extract "caldata" 0x5000 0x800 - ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0xc) - ;; - z1) - . /lib/upgrade/nand.sh - - if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 0x15000 0x1000 - else - ath9k_eeprom_extract "origcaldata" 0x15000 0x1000 - fi - ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +3) - ;; - *) - ath9k_eeprom_die "board $board is not supported yet" - ;; - esac - ;; - -"pci_wmac1.eeprom") - case $board in - mr18) - . /lib/upgrade/nand.sh - - if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 0x9000 0x800 - else - ath9k_eeprom_extract "odm-caldata" 0x9000 0x800 - fi - ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +3) - ;; - *) - ath9k_eeprom_die "board $board is not supported yet" - ;; - esac - ;; -esac diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata deleted file mode 100644 index c0e8f17d94..0000000000 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ /dev/null @@ -1,195 +0,0 @@ -#!/bin/sh - -ath10kcal_die() { - echo "ath10cal: " "$*" - exit 1 -} - -ath10kcal_from_file() { - local source=$1 - local offset=$(($2)) - local count=$(($3)) - - dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath10kcal_die "failed to extract calibration data from $source" -} - -ath10kcal_extract() { - local part=$1 - local offset=$(($2)) - local count=$(($3)) - local mtd cal_size - - mtd=$(find_mtd_chardev $part) - [ -n "$mtd" ] || \ - ath10kcal_die "no mtd device found for partition $part" - - # Check that the calibration data size in header equals the desired size - cal_size=$(dd if=$mtd bs=2 count=1 skip=$(( $offset / 2 )) conv=swab 2>/dev/null | hexdump -ve '1/2 "%d"') - - [ "$count" = "$cal_size" ] || \ - ath10kcal_die "no calibration data found in $part" - - dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath10kcal_die "failed to extract calibration data from $mtd" -} - -ath10kcal_patch_mac() { - local mac=$1 - - [ -z "$mac" ] && return - - macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc oflag=seek_bytes bs=6 seek=6 count=1 -} - -[ -e /lib/firmware/$FIRMWARE ] && exit 0 - -. /lib/functions.sh -. /lib/functions/system.sh - -board=$(board_name) - -case "$FIRMWARE" in -"ath10k/cal-pci-0000:00:00.0.bin") - case $board in - a40|\ - a60|\ - mr1750|\ - mr1750v2|\ - om5p-acv2) - ath10kcal_extract "ART" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) - ;; - archer-c25-v1|\ - tl-wdr6500-v2) - ath10kcal_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) - ;; - archer-c7-v4|\ - archer-c7-v5) - ath10kcal_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1) - ;; - cf-e355ac-v1|\ - cf-e380ac-v1|\ - cf-e380ac-v2|\ - dlan-pro-1200-ac|\ - e1700ac-v2|\ - e600gac-v2|\ - minibox-v3.2|\ - oolite-v5.2|\ - oolite-v5.2-dev|\ - sr3200|\ - xd3200) - ath10kcal_extract "art" 0x5000 0x844 - ;; - dap-2695-a1) - ath10kcal_extract "radiocfg" 0x5000 0x844 - ath10kcal_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a) - ;; - dir-869-a1|\ - qihoo-c301) - ath10kcal_extract "radiocfg" 0x5000 0x844 - ath10kcal_patch_mac $(mtd_get_mac_ascii devdata wlan5mac) - ;; - dw33d) - ath10kcal_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(mtd_get_mac_binary art 0x12) - ;; - epg5000|\ - esr1750) - ath10kcal_extract "caldata" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) - ;; - gl-ar750s|\ - gl-ar750|\ - tl-wpa8630) - ath10kcal_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) - ;; - koala) - ath10kcal_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0xc) +0) - ;; - mc-mac1200r) - ath10kcal_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1) - ;; - r6100) - ath10kcal_extract "caldata" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) +2) - ;; - rb-952ui-5ac2nd|\ - rb-wapg-5hact2hnd) - ath10kcal_from_file "/sys/firmware/mikrotik/hard_config/wlan_data" 0x5000 0x844 - ;; - re355|\ - re450|\ - tl-wr902ac-v1) - ath10kcal_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2) - ;; - unifiac-lite|\ - unifiac-pro) - ath10kcal_extract "EEPROM" 0x5000 0x844 - ;; - wi2a-ac200i) - ath10kcal_extract "ART" 0x5000 0x844 - ;; - esac - ;; -"ath10k/cal-pci-0000:01:00.0.bin") - case $board in - archer-c5|\ - archer-c7) - ath10kcal_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1) - ;; - nbg6616|\ - nbg6716) - ath10kcal_extract "RFdata" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) - ;; - om5p-ac) - ath10kcal_extract "ART" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) - ;; - rb-911g-5hpacd|\ - rb-921gs-5hpacd-r2|\ - rb-922uags-5hpacd|\ - rb-962uigs-5hact2hnt) - ath10kcal_from_file "/sys/firmware/mikrotik/hard_config/wlan_data" 0x5000 0x844 - ;; - wlr8100) - ath10kcal_extract "art" 0x5000 0x844 - ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1) - ;; - esac - ;; -"ath10k/pre-cal-pci-0000:00:00.0.bin") - case $board in - archer-c58-v1|\ - archer-c59-v1|\ - archer-c59-v2|\ - archer-c60-v1|\ - cf-e355ac-v2|\ - cf-e375ac) - ath10kcal_extract "art" 0x5000 0x2f20 - ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ - /lib/firmware/ath10k/QCA9888/hw2.0/board.bin - ;; - archer-c60-v2) - ath10kcal_extract "art" 0x5000 0x2f20 - ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ - /lib/firmware/ath10k/QCA9888/hw2.0/board.bin - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1) - ;; - cf-e385ac) - ath10kcal_extract "art" 0x5000 0x2f20 - ;; - esac - ;; -*) - exit 1 - ;; -esac diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac deleted file mode 100644 index 2a06b7d07b..0000000000 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ /dev/null @@ -1,24 +0,0 @@ -#!/bin/ash - -[ "$ACTION" == "add" ] || exit 0 - -PHYNBR=${DEVPATH##*/phy} - -[ -n $PHYNBR ] || exit 0 - -. /lib/functions.sh -. /lib/functions/system.sh - -board=$(board_name) - -case "$board" in - archer-c58-v1|\ - archer-c59-v1|\ - archer-c59-v2|\ - archer-c60-v1) - echo $(macaddr_add $(mtd_get_mac_binary mac 0x8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress - ;; - *) - ;; -esac - diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix b/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix deleted file mode 100644 index bd1abb9681..0000000000 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix +++ /dev/null @@ -1,52 +0,0 @@ -#!/bin/sh - -# For AR9220 and AR9223, GPIO JTAG must explicit be disabled -# before LEDs start working. Do this when wifi device is -# detected. - -# -# $DEVPATH is not valid for some boards (including WZR-HP-AG300H). -# Manipulate the $DEVPATH to reach the corresponding phyN. -# - -devdir=$(dirname $DEVPATH) -devdir=$(dirname $devdir) -phydir=/sys$devdir/ieee80211 - -[ -d $phydir ] || exit 0 - -phyname=$(cat $phydir/phy*/name) - -[ -z $phyname -o $ACTION != "add" ] && exit 0 - -# -# ar922x_disable_gpio_jtag(): -# -# Emulate -# REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE); -# for AR9220 and AR9223. -# - -ar922x_disable_gpio_jtag() { - local regidx=0x4054 - - [ -f /sys/kernel/debug/ieee80211/$1/ath9k/regidx ] || return - - echo $regidx > /sys/kernel/debug/ieee80211/$1/ath9k/regidx - regval=$(cat /sys/kernel/debug/ieee80211/$1/ath9k/regval) - regval=$((regval | 0x20000)) - echo regval $regval - echo $regval > /sys/kernel/debug/ieee80211/$1/ath9k/regval -} - -[ $phyname -a $ACTION = "add" ] && { - . /lib/functions.sh - - case $(board_name) in - wzr-hp-ag300h) - ar922x_disable_gpio_jtag $phyname - ;; - esac; -} - -exit 0 diff --git a/target/linux/ar71xx/base-files/etc/inittab b/target/linux/ar71xx/base-files/etc/inittab deleted file mode 100644 index 9820e7144b..0000000000 --- a/target/linux/ar71xx/base-files/etc/inittab +++ /dev/null @@ -1,3 +0,0 @@ -::sysinit:/etc/init.d/rcS S boot -::shutdown:/etc/init.d/rcS K shutdown -::askconsole:/usr/libexec/login.sh diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration deleted file mode 100644 index 0388fb6dc9..0000000000 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration +++ /dev/null @@ -1,108 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2013 OpenWrt.org -# - -SWITCH_NAME_CHANGED= - -. /lib/functions.sh - -do_change_switch_name() { - local config="$1" - local option=$2 - local oldname=$3 - local newname=$4 - local val - - config_get val "$config" $option - [ "$val" != "$oldname" ] && return 0 - - uci_set network "$config" $option $newname - SWITCH_NAME_CHANGED=1 - - return 0 -} - -migrate_switch_name() { - local oldname=$1 - local newname=$2 - - config_load network - - logger -t migrate-switchX "Updating switch names in network configuration" - - config_foreach do_change_switch_name switch name $oldname $newname - config_foreach do_change_switch_name switch_vlan device $oldname $newname - - [ "$SWITCH_NAME_CHANGED" = "1" ] && { - logger -t migrate-switchX "Switch names updated, saving network configuration" - uci commit network - } -} - -board=$(board_name) - -case "$board" in -airrouter|\ -ap121|\ -ap121-mini|\ -ap96|\ -dir-600-a1|\ -dir-615-c1|\ -dir-615-e1|\ -dir-615-e4|\ -dir-825-c1|\ -ebr-2310-c1|\ -ew-dorin|\ -ew-dorin-router|\ -ja76pf|\ -rb-750|\ -rb-751|\ -tew-632brp|\ -tew-712br|\ -tl-mr3220|\ -tl-mr3220-v2 |\ -tl-mr3420|\ -tl-wdr4300|\ -tl-wr741nd|\ -tl-wr741nd-v4|\ -tl-wr841n-v7|\ -tl-wr1041n-v2|\ -whr-g301n|\ -whr-hp-g300n|\ -whr-hp-gn|\ -wrt160nl|\ -wzr-hp-ag300h|\ -wzr-hp-g300nh2|\ -wzr-hp-g450h|\ -z1) - migrate_switch_name "eth0" "switch0" - ;; - -el-m150|\ -rb-450) - migrate_switch_name "eth1" "switch0" - ;; - -db120|\ -rb-2011il|\ -rb-2011ils|\ -rb-2011l|\ -rb-2011uas-2hnd) - migrate_switch_name "eth0" "switch0" - migrate_switch_name "eth1" "switch1" - ;; - -dir-825-b1|\ -nbg460n_550n_550nh|\ -tew-673gru) - migrate_switch_name "rtl8366s" "switch0" - ;; - -tl-wr1043nd) - migrate_switch_name "rtl8366rb" "switch0" - ;; - -esac - -exit 0 diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-vlan-migration b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-vlan-migration deleted file mode 100644 index 259d240610..0000000000 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-vlan-migration +++ /dev/null @@ -1,13 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2010 OpenWrt.org -# - -dev="$(uci -q get network.@switch_vlan[0].device)" -vlan="$(uci -q get network.@switch_vlan[0].vlan)" - -if [ "$dev" = "rtl8366s" ] && [ "$vlan" = 0 ]; then - logger -t vlan-migration "VLAN 0 is invalid for RTL8366s, changing to 1" - uci set network.@switch_vlan[0].vlan=1 - uci commit network -fi diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration b/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration deleted file mode 100644 index c244b3b460..0000000000 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration +++ /dev/null @@ -1,84 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2013 OpenWrt.org -# - -LED_OPTIONS_CHANGED=0 - -. /lib/functions.sh - -do_led_update_sysfs() -{ - local cfg=$1; shift - local tuples="$@" - local sysfs - local name - - config_get sysfs $cfg sysfs - config_get name $cfg name - - [ -z "$sysfs" ] && return - - for tuple in $tuples; do - local old=${tuple%=*} - local new=${tuple#*=} - local new_sysfs - - new_sysfs=$(echo ${sysfs} | sed "s/${old}/${new}/") - - [ "$new_sysfs" = "$sysfs" ] && continue - - uci set system.${cfg}.sysfs="${new_sysfs}" - LED_OPTIONS_CHANGED=1 - - logger -t led-migration "sysfs option of LED \"${name}\" updated to ${new_sysfs}" - done; -} - -migrate_leds() -{ - config_load system - config_foreach do_led_update_sysfs led "$@" -} - -board=$(board_name) - -case "$board" in -archer-c7) - migrate_leds ":blue:=:green:" - ;; -dhp-1565-a1|\ -dir-825-c1|\ -dir-835-a1) - migrate_leds ":orange:=:amber:" ":wifi_bgn=:wlan2g" - ;; -dr344) - migrate_leds ":red:=:green:" ":yellow:=:green:" - ;; -gl-ar150) - migrate_leds "gl-ar150:wlan=gl-ar150:orange:wlan" "gl-ar150:lan=gl-ar150:green:lan" "gl-ar150:wan=gl-ar150:green:wan" - ;; -oolite-v1) - migrate_leds "oolite:=${board}" - ;; -wndap360|\ -wndr3700|\ -wnr2000|\ -wnr2200) - migrate_leds "${board}:=netgear:" - ;; -wndr3700v4|\ -wndr4300) - migrate_leds ":orange:=:amber:" - ;; -wnr1000-v2) - migrate_leds "wnr1000v2:=netgear:" - ;; -wnr612-v2) - migrate_leds "wnr612v2:=netgear:" - ;; -esac - -[ "$LED_OPTIONS_CHANGED" = "1" ] && uci commit system - -exit 0 diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-checksum b/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-checksum deleted file mode 100644 index 2d1afb11cb..0000000000 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-checksum +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2010 OpenWrt.org -# - -. /lib/functions.sh - -board=$(board_name) - -fixtrx() { - mtd -o 32 fixtrx firmware -} - -fixwrgg() { - local kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"kernel".*/\1/p' /proc/mtd) - - [ "$kernel_size" ] && mtd -c 0x$kernel_size fixwrgg firmware -} - -case "$board" in -mynet-rext |\ -wrt160nl) - fixtrx - ;; -dap-2695-a1) - fixwrgg - ;; -esac diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-seama-header b/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-seama-header deleted file mode 100644 index b3857ef07f..0000000000 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-seama-header +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/sh - -. /lib/functions.sh - -fix_seama_header() { - local kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"kernel".*/\1/p' /proc/mtd) - - [ "$kernel_size" ] && mtd -c 0x$kernel_size fixseama firmware -} - -board=$(board_name) - -case "$board" in -dir-869-a1) - fix_seama_header - ;; -esac diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh deleted file mode 100755 index 044ef4eae5..0000000000 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ /dev/null @@ -1,1589 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2009-2011 OpenWrt.org -# - -AR71XX_BOARD_NAME= -AR71XX_MODEL= - -ar71xx_get_mtd_offset_size_format() { - local mtd="$1" - local offset="$2" - local size="$3" - local format="$4" - local dev - - dev=$(find_mtd_part $mtd) - [ -z "$dev" ] && return - - dd if=$dev iflag=skip_bytes bs=$size skip=$offset count=1 2>/dev/null | hexdump -v -e "1/1 \"$format\"" -} - -ar71xx_get_mtd_part_magic() { - local mtd="$1" - ar71xx_get_mtd_offset_size_format "$mtd" 0 4 %02x -} - -wndr3700_board_detect() { - local machine="$1" - local magic - local name - - name="wndr3700" - - magic="$(ar71xx_get_mtd_part_magic firmware)" - case $magic in - "33373030") - machine="NETGEAR WNDR3700" - ;; - "33373031") - model="$(ar71xx_get_mtd_offset_size_format art 41 32 %c)" - # Use awk to remove everything unprintable - model_stripped="$(ar71xx_get_mtd_offset_size_format art 41 32 %c | LC_CTYPE=C awk -v 'FS=[^[:print:]]' '{print $1; exit}')" - case $model in - $'\xff'*) - if [ "${model:24:1}" = 'N' ]; then - machine="NETGEAR WNDRMAC" - else - machine="NETGEAR WNDR3700v2" - fi - ;; - '29763654+16+64'*) - machine="NETGEAR ${model_stripped:14}" - ;; - '29763654+16+128'*) - machine="NETGEAR ${model_stripped:15}" - ;; - *) - # Unknown ID - machine="NETGEAR ${model_stripped}" - esac - esac - - AR71XX_BOARD_NAME="$name" - AR71XX_MODEL="$machine" -} - -ubnt_get_mtd_part_magic() { - ar71xx_get_mtd_offset_size_format EEPROM 4118 2 %02x -} - -ubnt_xm_board_detect() { - local model - local magic - - magic="$(ubnt_get_mtd_part_magic)" - case ${magic:0:3} in - "e00"|\ - "e01"|\ - "e80") - model="Ubiquiti NanoStation M" - ;; - "e0a") - model="Ubiquiti NanoStation loco M" - ;; - "e1b"|\ - "e1d") - model="Ubiquiti Rocket M" - ;; - "e20"|\ - "e2d") - model="Ubiquiti Bullet M" - ;; - "e30") - model="Ubiquiti PicoStation M" - ;; - esac - - [ -z "$model" ] || AR71XX_MODEL="${model}${magic:3:1}" -} - -ubnt_unifi_ac_get_mtd_part_magic() { - ar71xx_get_mtd_offset_size_format EEPROM 12 2 %02x -} - -ubnt_unifi_ac_board_detect() { - local model - local magic - - magic="$(ubnt_unifi_ac_get_mtd_part_magic)" - case ${magic:0:4} in - "e517") - model="Ubiquiti UniFi-AC-LITE" - ;; - "e527") - model="Ubiquiti UniFi-AC-LR" - ;; - "e537") - model="Ubiquiti UniFi-AC-PRO" - ;; - "e557") - model="Ubiquiti UniFi-AC-MESH" - ;; - "e567") - model="Ubiquiti UniFi-AC-MESH-PRO" - ;; - esac - - [ -z "$model" ] || AR71XX_MODEL="${model}" -} - -cybertan_get_hw_magic() { - local part - - part=$(find_mtd_part firmware) - [ -z "$part" ] && return 1 - - dd bs=8 count=1 skip=0 if=$part 2>/dev/null | hexdump -v -n 8 -e '1/1 "%02x"' -} - -dir505_board_detect() { - local dev=$(find_mtd_part 'mac') - [ -z "$dev" ] && return - - # The revision is stored at the beginning of the "mac" partition - local rev="$(LC_CTYPE=C awk -v 'FS=[^[:print:]]' '{print $1; exit}' $dev)" - AR71XX_MODEL="D-Link DIR-505 rev. $rev" -} - -tplink_get_hwid() { - local part - - part=$(find_mtd_part firmware) - [ -z "$part" ] && return 1 - - dd if=$part bs=4 count=1 skip=16 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -tplink_get_mid() { - local part - - part=$(find_mtd_part firmware) - [ -z "$part" ] && return 1 - - dd if=$part bs=4 count=1 skip=17 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -tplink_board_detect() { - local model="$1" - local hwid - local hwver - - hwid=$(tplink_get_hwid) - mid=$(tplink_get_mid) - hwver=${hwid:6:2} - hwver=" v${hwver#0}" - - case "$hwid" in - "001001"*) - model="TP-Link TL-MR10U" - ;; - "001101"*) - model="TP-Link TL-MR11U" - ;; - "001201"*) - model="TP-Link TL-MR12U" - ;; - "001301"*) - model="TP-Link TL-MR13U" - ;; - "007260"*) - model="TellStick ZNet Lite" - ;; - "015000"*) - model="EasyLink EL-M150" - ;; - "015300"*) - model="EasyLink EL-MINI" - ;; - "044401"*) - model="ANTMINER-S1" - ;; - "044403"*) - model="ANTMINER-S3" - ;; - "066601"*) - model="OMYlink OMY-G1" - ;; - "066602"*) - model="OMYlink OMY-X1" - ;; - "070100"*) - model="TP-Link TL-WA701N/ND" - ;; - "070301"*) - model="TP-Link TL-WR703N" - ;; - "071000"*) - model="TP-Link TL-WR710N" - - [ "$hwid" = '07100002' -a "$mid" = '00000002' ] && hwver=' v2.1' - ;; - "072001"*) - model="TP-Link TL-WR720N" - ;; - "073000"*) - model="TP-Link TL-WA730RE" - ;; - "074000"*) - model="TP-Link TL-WR740N/ND" - ;; - "074100"*) - model="TP-Link TL-WR741N/ND" - ;; - "074300"*) - model="TP-Link TL-WR743N/ND" - ;; - "075000"*) - model="TP-Link TL-WA750RE" - ;; - "080100"*) - model="TP-Link TL-WA801N/ND" - ;; - "080200"*) - model="TP-Link TL-WR802N" - - [ "$hwid" = '08020002' -a "$mid" = '00000002' ] && hwver=' v2' - ;; - "081000"*) - model="TP-Link TL-WR810N" - ;; - "083000"*) - model="TP-Link TL-WA830RE" - - [ "$hwver" = ' v10' ] && hwver=' v1' - ;; - "084100"*) - model="TP-Link TL-WR841N/ND" - - [ "$hwid" = '08410002' -a "$mid" = '00000002' ] && hwver=' v1.5' - ;; - "084200"*) - model="TP-Link TL-WR842N/ND" - ;; - "084300"*) - model="TP-Link TL-WR843N/ND" - ;; - "085000"*) - model="TP-Link TL-WA850RE" - ;; - "085500"*) - model="TP-Link TL-WA855RE" - ;; - "086000"*) - model="TP-Link TL-WA860RE" - ;; - "090100"*) - model="TP-Link TL-WA901N/ND" - ;; - "094000"*) - model="TP-Link TL-WR940N" - ;; - "094100"*) - model="TP-Link TL-WR941N/ND" - - [ "$hwid" = "09410002" -a "$mid" = "00420001" ] && { - model="Rosewill RNX-N360RT" - hwver="" - } - ;; - "104100"*) - model="TP-Link TL-WR1041N/ND" - ;; - "104300"*) - model="TP-Link TL-WR1043N/ND" - ;; - "120000"*) - model="MERCURY MAC1200R" - ;; - "254300"*) - model="TP-Link TL-WR2543N/ND" - ;; - "302000"*) - model="TP-Link TL-MR3020" - ;; - "304000"*) - model="TP-Link TL-MR3040" - ;; - "322000"*) - model="TP-Link TL-MR3220" - ;; - "332000"*) - model="TP-Link TL-WDR3320" - ;; - "342000"*) - model="TP-Link TL-MR3420" - ;; - "350000"*) - model="TP-Link TL-WDR3500" - ;; - "360000"*) - model="TP-Link TL-WDR3600" - ;; - "430000"*) - model="TP-Link TL-WDR4300" - ;; - "430080"*) - iw reg set IL - model="TP-Link TL-WDR4300 (IL)" - ;; - "431000"*) - model="TP-Link TL-WDR4310" - ;; - "44440101"*) - model="ANTROUTER-R1" - ;; - "453000"*) - model="Mercury MW4530R" - ;; - "49000002") - model="TP-Link TL-WDR4900" - ;; - "640000"*) - model="TP-Link TL-MR6400" - ;; - "65000002") - model="TP-Link TL-WDR6500" - ;; - "721000"*) - model="TP-Link TL-WA7210N" - ;; - "750000"*|\ - "c70000"*) - model="TP-Link Archer C7" - ;; - "751000"*) - model="TP-Link TL-WA7510N" - ;; - "934100"*) - model="NC-LINK SMART-300" - ;; - "c50000"*) - model="TP-Link Archer C5" - ;; - *) - hwver="" - ;; - esac - - AR71XX_MODEL="$model$hwver" -} - -tplink_pharos_get_model_string() { - local part - part=$(find_mtd_part 'product-info') - [ -z "$part" ] && return 1 - - # The returned string will end with \r\n, but we don't remove it here - # to simplify matching against it in the sysupgrade image check - dd if=$part bs=1 skip=4360 2>/dev/null | head -n 1 -} - -tplink_pharos_board_detect() { - local model_string="$1" - local oIFS="$IFS"; IFS=":"; set -- $model_string; IFS="$oIFS" - - local model="${1%%\(*}" - - AR71XX_MODEL="TP-Link $model v$2" -} - -tplink_pharos_v2_get_model_string() { - local part - part=$(find_mtd_part 'product-info') - [ -z "$part" ] && return 1 - - dd if=$part iflag=skip_bytes bs=64 skip=4360 count=1 2>/dev/null | tr -d '\r\0' | head -n 1 -} - -mikrotik_board_detect() { - local machine="$1" - - case "$machine" in - *"2011iL") - name="rb-2011il" - ;; - *"2011iLS") - name="rb-2011ils" - ;; - *"2011L") - name="rb-2011l" - ;; - *"2011UAS") - name="rb-2011uas" - ;; - *"2011UAS-2HnD") - name="rb-2011uas-2hnd" - ;; - *"2011UiAS") - name="rb-2011uias" - ;; - *"2011UiAS-2HnD") - name="rb-2011uias-2hnd" - ;; - *"2011UiAS-2HnD r2") - name="rb-2011uias-2hnd-r2" - ;; - *"411/A/AH") - name="rb-411" - ;; - *"411U") - name="rb-411u" - ;; - *"433/AH") - name="rb-433" - ;; - *"433UAH") - name="rb-433u" - ;; - *"435G") - name="rb-435g" - ;; - *"450") - name="rb-450" - ;; - *"450G") - name="rb-450g" - ;; - *"493/AH") - name="rb-493" - ;; - *"493G") - name="rb-493g" - ;; - *"750") - name="rb-750" - ;; - *"750 r2"|\ - *"750r2") - name="rb-750-r2" - ;; - *"750GL") - name="rb-750gl" - ;; - *"750P r2") - name="rb-750p-pbr2" - ;; - *"750UP r2"|\ - *"750UPr2") - name="rb-750up-r2" - ;; - *"751") - name="rb-751" - ;; - *"751G") - name="rb-751g" - ;; - *"911-2Hn") - name="rb-911-2hn" - ;; - *"911-5Hn") - name="rb-911-5hn" - ;; - *"911G-2HPnD") - name="rb-911g-2hpnd" - ;; - *"911G-5HPacD") - name="rb-911g-5hpacd" - ;; - *"911G-5HPnD") - name="rb-911g-5hpnd" - ;; - *"912UAG-2HPnD") - name="rb-912uag-2hpnd" - ;; - *"912UAG-5HPnD") - name="rb-912uag-5hpnd" - ;; - *"921GS-5HPacD r2") - name="rb-921gs-5hpacd-r2" - ;; - *"922UAGS-5HPacD") - name="rb-922uags-5hpacd" - ;; - *"931-2nD") - name="rb-931-2nd" - ;; - *"941-2nD") - name="rb-941-2nd" - ;; - *"951G-2HnD") - name="rb-951g-2hnd" - ;; - *"951Ui-2HnD") - name="rb-951ui-2hnd" - ;; - *"951Ui-2nD") - name="rb-951ui-2nd" - ;; - *"952Ui-5ac2nD") - name="rb-952ui-5ac2nd" - ;; - *"962UiGS-5HacT2HnT") - name="rb-962uigs-5hact2hnt" - ;; - *"LHG 5nD") - name="rb-lhg-5nd" - ;; - *"mAP 2nD"|\ - *"mAP2nD") - name="rb-map-2nd" - ;; - *"mAP L-2nD"|\ - *"mAPL-2nD") - name="rb-mapl-2nd" - ;; - *"SXT 2nD r3") - name="rb-sxt-2nd-r3" - ;; - *"SXT Lite2") - name="rb-sxt2n" - ;; - *"SXT Lite5") - name="rb-sxt5n" - ;; - *"wAP 2nD r2") - name="rb-wap-2nd" - ;; - *"wAP R-2nD"|\ - *"wAPR-2nD") - name="rb-wapr-2nd" - ;; - *"wAP G-5HacT2HnD"|\ - *"wAPG-5HacT2HnD") - name="rb-wapg-5hact2hnd" - ;; - esac - - echo "$name" -} - -ar71xx_board_detect() { - local machine - local name - - machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo) - - case "$machine" in - *"A40") - name="a40" - ;; - *"A60") - name="a60" - ;; - *"AC1750DB") - name="f9k1115v2" - ;; - *"AirGateway") - name="airgateway" - ;; - *"AirGateway Pro") - name="airgatewaypro" - ;; - *"AirRouter") - name="airrouter" - ;; - *"ALFA Network AP120C") - name="alfa-ap120c" - ;; - *"ALFA Network AP96") - name="alfa-ap96" - ;; - *"ALFA Network N2/N5") - name="alfa-nx" - ;; - *"ALL0258N") - name="all0258n" - ;; - *"ALL0305") - name="all0305" - ;; - *"ALL0315N") - name="all0315n" - ;; - *"Antminer-S1") - name="antminer-s1" - ;; - *"Antminer-S3") - name="antminer-s3" - ;; - *"AP121 reference board") - name="ap121" - ;; - *"AP121-MINI") - name="ap121-mini" - ;; - *"AP121F") - name="ap121f" - ;; - *"AP132 reference board") - name="ap132" - ;; - *"AP135-020 reference board") - name="ap135-020" - ;; - *"AP136-010 reference board") - name="ap136-010" - ;; - *"AP136-020 reference board") - name="ap136-020" - ;; - *"AP143 reference board") - name="ap143" - ;; - *"AP147-010 reference board") - name="ap147-010" - ;; - *"AP152 reference board") - name="ap152" - ;; - *"AP531B0") - name="ap531b0" - ;; - *"AP90Q") - name="ap90q" - ;; - *"AP91-5G") - name="ap91-5g" - ;; - *"Archer C25 v1") - name="archer-c25-v1" - ;; - *"Archer C5") - name="archer-c5" - ;; - *"Archer C7 v4") - name="archer-c7-v4" - ;; - *"Archer C7 v5") - name="archer-c7-v5" - ;; - *"Archer C58 v1") - name="archer-c58-v1" - ;; - *"Archer C59 v1") - name="archer-c59-v1" - ;; - *"Archer C59 v2") - name="archer-c59-v2" - ;; - *"Archer C60 v1") - name="archer-c60-v1" - ;; - *"Archer C60 v2") - name="archer-c60-v2" - ;; - *"Archer C7") - name="archer-c7" - ;; - *"Arduino Yun") - name="arduino-yun" - ;; - *"Atheros AP96") - name="ap96" - ;; - *"AW-NR580") - name="aw-nr580" - ;; - *"BHR-4GRV2") - name="bhr-4grv2" - ;; - *"Black Swift board"*) - name="bsb" - ;; - *"Bullet M") - name="bullet-m" - ubnt_xm_board_detect - ;; - *"Bullet M XW") - name="bullet-m-xw" - ;; - *"BXU2000n-2 rev. A1") - name="bxu2000n-2-a1" - ;; - *"C-55") - name="c-55" - ;; - *"C-60") - name="c-60" - ;; - *"CAP324") - name="cap324" - ;; - *"CAP4200AG") - name="cap4200ag" - ;; - *"Carambola2"*) - name="carambola2" - ;; - *"CF-E316N v2") - name="cf-e316n-v2" - ;; - *"CF-E320N v2") - name="cf-e320n-v2" - ;; - *"CF-E355AC v1") - name="cf-e355ac-v1" - ;; - *"CF-E355AC v2") - name="cf-e355ac-v2" - ;; - *"CF-E375AC") - name="cf-e375ac" - ;; - *"CF-E380AC v1") - name="cf-e380ac-v1" - ;; - *"CF-E380AC v2") - name="cf-e380ac-v2" - ;; - *"CF-E385AC") - name="cf-e385ac" - ;; - *"CF-E520N") - name="cf-e520n" - ;; - *"CF-E530N") - name="cf-e530n" - ;; - *"CPE210/220") - name="cpe210" - tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')" - ;; - *"CPE210 v2") - name="cpe210-v2" - tplink_pharos_board_detect "$(tplink_pharos_v2_get_model_string)" - ;; - *"CPE210 v3") - name="cpe210-v3" - tplink_pharos_board_detect "$(tplink_pharos_v2_get_model_string)" - ;; - *"CPE505N") - name="cpe505n" - ;; - *"CPE510/520") - name="cpe510" - tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')" - ;; - *"CPE510 v2") - name="cpe510-v2" - tplink_pharos_board_detect "$(tplink_pharos_v2_get_model_string)" - ;; - *"CPE830") - name="cpe830" - ;; - *"CPE870") - name="cpe870" - ;; - *"CR3000") - name="cr3000" - ;; - *"CR5000") - name="cr5000" - ;; - *"DAP-1330 Rev. A1") - name="dap-1330-a1" - ;; - *"DAP-2695 rev. A1") - name="dap-2695-a1" - ;; - *"DB120 reference board") - name="db120" - ;; - *"DGL-5500 rev. A1") - name="dgl-5500-a1" - ;; - *"DHP-1565 rev. A1") - name="dhp-1565-a1" - ;; - *"DIR-505 rev. A1") - name="dir-505-a1" - dir505_board_detect - ;; - *"DIR-600 rev. A1") - name="dir-600-a1" - ;; - *"DIR-615 rev. C1") - name="dir-615-c1" - ;; - *"DIR-615 rev. E1") - name="dir-615-e1" - ;; - *"DIR-615 rev. E4") - name="dir-615-e4" - ;; - *"DIR-615 rev. I1") - name="dir-615-i1" - ;; - *"DIR-825 rev. B1") - name="dir-825-b1" - ;; - *"DIR-825 rev. C1") - name="dir-825-c1" - ;; - *"DIR-835 rev. A1") - name="dir-835-a1" - ;; - *"DIR-869 rev. A1") - name="dir-869-a1" - ;; - *"dLAN Hotspot") - name="dlan-hotspot" - ;; - *"dLAN pro 1200+ WiFi ac") - name="dlan-pro-1200-ac" - ;; - *"dLAN pro 500 Wireless+") - name="dlan-pro-500-wp" - ;; - *"Domino Pi") - name="gl-domino" - ;; - *"DR342") - name="dr342" - ;; - *"DR344") - name="dr344" - ;; - *"DR531") - name="dr531" - ;; - *"Dragino v2") - name="dragino2" - ;; - *"DW33D") - name="dw33d" - ;; - *"E1700AC v2") - name="e1700ac-v2" - ;; - *"E2100L") - name="e2100l" - ;; - *"E558 v2") - name="e558-v2" - ;; - *"E600G v2") - name="e600g-v2" - ;; - *"E600GAC v2") - name="e600gac-v2" - ;; - *"E750A v4") - name="e750a-v4" - ;; - *"E750G v8") - name="e750g-v8" - ;; - *"EAP120") - name="eap120" - tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')" - ;; - *"EAP300 v2") - name="eap300v2" - ;; - *"EAP7660D") - name="eap7660d" - ;; - *"EBR-2310 rev. C1") - name="ebr-2310-c1" - ;; - *"EL-M150") - name="el-m150" - ;; - *"EL-MINI") - name="el-mini" - ;; - *"EmbWir-Balin") - name="ew-balin" - ;; - *"EmbWir-Dorin") - name="ew-dorin" - ;; - *"EmbWir-Dorin-Router") - name="ew-dorin-router" - ;; - *"ENS202EXT") - name="ens202ext" - ;; - *"EPG5000") - name="epg5000" - ;; - *"ESR1750") - name="esr1750" - ;; - *"ESR900") - name="esr900" - ;; - *"eTactica EG-200") - name="rme-eg200" - ;; - *"FRITZ!Box 4020") - name="fritz4020" - ;; - *"FRITZ!WLAN Repeater 300E") - name="fritz300e" - ;; - *"FRITZ!WLAN Repeater 450E") - name="fritz450e" - ;; - *"GL-AR150") - name="gl-ar150" - ;; - *"GL-AR300") - name="gl-ar300" - ;; - *"GL-AR300M") - name="gl-ar300m" - ;; - *"GL-AR750") - name="gl-ar750" - ;; - *"GL-AR750S") - name="gl-ar750s" - ;; - *"GL-CONNECT INET v1") - name="gl-inet" - - local size="$(mtd_get_part_size 'firmware')" - - [ "$size" = "8192000" ] && AR71XX_MODEL="GL-iNet 6408A v1" - [ "$size" = "16580608" ] && AR71XX_MODEL="GL-iNet 6416A v1" - ;; - *"GL-MIFI") - name="gl-mifi" - ;; - *"GL-USB150") - name="gl-usb150" - ;; - *"HiveAP-121") - name="hiveap-121" - ;; - *"HiWiFi HC6361") - name="hiwifi-hc6361" - ;; - *"Hornet-UB") - local size="$(mtd_get_part_size 'firmware')" - - [ "$size" = "7929856" ] && name="hornet-ub" - [ "$size" = "16318464" ] && name="hornet-ub-x2" - ;; - *"JA76PF") - name="ja76pf" - ;; - *"JA76PF2") - name="ja76pf2" - ;; - *"JWAP003") - name="jwap003" - ;; - *"JWAP230") - name="jwap230" - ;; - *"Koala") - name="koala" - ;; - *"LAN Turtle") - name="lan-turtle" - ;; - *"Lima"*) - name="lima" - ;; - *"Litebeam M5"*) - name="lbe-m5" - ;; - *"Loco M XW") - name="loco-m-xw" - ;; - *"LS-SR71") - name="ls-sr71" - ;; - *"MAC1200R") - name="mc-mac1200r" - ;; - "MikroTik"*|\ - "Mikrotik"*) - name=$(mikrotik_board_detect "$machine") - ;; - *"MiniBox V1.0") - name="minibox-v1" - ;; - *"Minibox V3.2") - name="minibox-v3.2" - ;; - *"MR12") - name="mr12" - ;; - *"MR16") - name="mr16" - ;; - *"MR1750") - name="mr1750" - ;; - *"MR1750v2") - name="mr1750v2" - ;; - *"MR18") - name="mr18" - ;; - *"MR600") - name="mr600" - ;; - *"MR600v2") - name="mr600v2" - ;; - *"MR900") - name="mr900" - ;; - *"MR900v2") - name="mr900v2" - ;; - *"My Net N600") - name="mynet-n600" - ;; - *"My Net N750") - name="mynet-n750" - ;; - *"My Net Wi-Fi Range Extender") - name="mynet-rext" - ;; - *"MZK-W04NU") - name="mzk-w04nu" - ;; - *"MZK-W300NH") - name="mzk-w300nh" - ;; - *"N5Q") - name="n5q" - ;; - *"Nanostation M") - name="nanostation-m" - ubnt_xm_board_detect - ;; - *"Nanostation M XW") - name="nanostation-m-xw" - ;; - *"NBG460N/550N/550NH") - name="nbg460n_550n_550nh" - ;; - *"NBG6616") - name="nbg6616" - ;; - *"NBG6716") - name="nbg6716" - ;; - *"OM2P") - name="om2p" - ;; - *"OM2P HS") - name="om2p-hs" - ;; - *"OM2P HSv2") - name="om2p-hsv2" - ;; - *"OM2P HSv3") - name="om2p-hsv3" - ;; - *"OM2P HSv4") - name="om2p-hsv4" - ;; - *"OM2P LC") - name="om2p-lc" - ;; - *"OM2Pv2") - name="om2pv2" - ;; - *"OM2Pv4") - name="om2pv4" - ;; - *"OM5P") - name="om5p" - ;; - *"OM5P AC") - name="om5p-ac" - ;; - *"OM5P ACv2") - name="om5p-acv2" - ;; - *"OM5P AN") - name="om5p-an" - ;; - *"OMY-G1") - name="omy-g1" - ;; - *"OMY-X1") - name="omy-x1" - ;; - *"Onion Omega") - name="onion-omega" - ;; - *"Oolite V1.0") - name="oolite-v1" - ;; - *"Packet Squirrel") - name="packet-squirrel" - ;; - *"Oolite V5.2") - name="oolite-v5.2" - ;; - *"Oolite V5.2-Dev") - name="oolite-v5.2-dev" - ;; - *"PB42") - name="pb42" - ;; - *"PB44 reference board") - name="pb44" - ;; - *"PQI Air Pen") - name="pqi-air-pen" - ;; - *"Qihoo 360 C301") - name="qihoo-c301" - ;; - *"R36A") - name="r36a" - ;; - *"R602N") - name="r602n" - ;; - *"R6100") - name="r6100" - ;; - *"Rambutan"*) - name="rambutan" - ;; - *"RE355") - name="re355" - ;; - *"RE450") - name="re450" - ;; - *"Rocket M") - name="rocket-m" - ubnt_xm_board_detect - ;; - *"Rocket M TI") - name="rocket-m-ti" - ;; - *"Rocket M XW") - name="rocket-m-xw" - ;; - *"RouterStation") - name="routerstation" - ;; - *"RouterStation Pro") - name="routerstation-pro" - ;; - *"RUT900") - name="rut900" - ;; - *"RW2458N") - name="rw2458n" - ;; - *"SC1750") - name="sc1750" - ;; - *"SC300M") - name="sc300m" - ;; - *"SC450") - name="sc450" - ;; - *"SMART-300") - name="smart-300" - ;; - *"SOM9331") - name="som9331" - ;; - *"SR3200") - name="sr3200" - ;; - *"T830") - name="t830" - ;; - *"TellStick ZNet Lite") - name="tellstick-znet-lite" - ;; - *"TEW-632BRP") - name="tew-632brp" - ;; - *"TEW-673GRU") - name="tew-673gru" - ;; - *"TEW-712BR") - name="tew-712br" - ;; - *"TEW-732BR") - name="tew-732br" - ;; - *"TEW-823DRU") - name="tew-823dru" - ;; - *"TL-MR10U") - name="tl-mr10u" - ;; - *"TL-MR11U") - name="tl-mr11u" - ;; - *"TL-MR12U") - name="tl-mr12u" - ;; - *"TL-MR13U v1") - name="tl-mr13u" - ;; - *"TL-MR3020") - name="tl-mr3020" - ;; - *"TL-MR3040") - name="tl-mr3040" - ;; - *"TL-MR3040 v2") - name="tl-mr3040-v2" - ;; - *"TL-MR3220") - name="tl-mr3220" - ;; - *"TL-MR3220 v2") - name="tl-mr3220-v2" - ;; - *"TL-MR3420") - name="tl-mr3420" - ;; - *"TL-MR3420 v2") - name="tl-mr3420-v2" - ;; - *"TL-MR6400") - name="tl-mr6400" - ;; - *"TL-WA701ND v2") - name="tl-wa701nd-v2" - ;; - *"TL-WA7210N v2") - name="tl-wa7210n-v2" - ;; - *"TL-WA750RE") - name="tl-wa750re" - ;; - *"TL-WA7510N v1") - name="tl-wa7510n" - ;; - *"TL-WA801ND v2") - name="tl-wa801nd-v2" - ;; - *"TL-WA801ND v3") - name="tl-wa801nd-v3" - ;; - *"TL-WA830RE v2") - name="tl-wa830re-v2" - ;; - *"TL-WA850RE") - name="tl-wa850re" - ;; - *"TL-WA850RE v2") - name="tl-wa850re-v2" - ;; - *"TL-WA855RE v1") - name="tl-wa855re-v1" - ;; - *"TL-WA860RE") - name="tl-wa860re" - ;; - *"TL-WA901ND") - name="tl-wa901nd" - ;; - *"TL-WA901ND v2") - name="tl-wa901nd-v2" - ;; - *"TL-WA901ND v3") - name="tl-wa901nd-v3" - ;; - *"TL-WA901ND v4") - name="tl-wa901nd-v4" - ;; - *"TL-WA901ND v5") - name="tl-wa901nd-v5" - ;; - *"TL-WDR3320 v2") - name="tl-wdr3320-v2" - ;; - *"TL-WDR3500") - name="tl-wdr3500" - ;; - *"TL-WDR3600/4300/4310") - name="tl-wdr4300" - ;; - *"TL-WDR4900 v2") - name="tl-wdr4900-v2" - ;; - *"TL-WDR6500 v2") - name="tl-wdr6500-v2" - ;; - *"TL-WPA8630") - name="tl-wpa8630" - ;; - *"TL-WR1041N v2") - name="tl-wr1041n-v2" - ;; - *"TL-WR1043N v5") - name="tl-wr1043n-v5" - ;; - *"TL-WR1043ND") - name="tl-wr1043nd" - ;; - *"TL-WR1043ND v2") - name="tl-wr1043nd-v2" - ;; - *"TL-WR1043ND v4") - name="tl-wr1043nd-v4" - ;; - *"TL-WR2543N"*) - name="tl-wr2543n" - ;; - *"TL-WR703N v1") - name="tl-wr703n" - ;; - *"TL-WR710N v1") - name="tl-wr710n" - ;; - *"TL-WR720N"*) - name="tl-wr720n-v3" - ;; - *"TL-WR740N/ND v6") - name="tl-wr740n-v6" - ;; - *"TL-WR741ND") - name="tl-wr741nd" - ;; - *"TL-WR741ND v4") - name="tl-wr741nd-v4" - ;; - *"TL-WR802N v1") - name="tl-wr802n-v1" - ;; - *"TL-WR802N v2") - name="tl-wr802n-v2" - ;; - *"TL-WR810N") - name="tl-wr810n" - ;; - *"TL-WR810N v2") - name="tl-wr810n-v2" - ;; - *"TL-WR840N v2") - name="tl-wr840n-v2" - ;; - *"TL-WR840N v3") - name="tl-wr840n-v3" - ;; - *"TL-WR841N v1") - name="tl-wr841n-v1" - ;; - *"TL-WR841N/ND v11") - name="tl-wr841n-v11" - ;; - *"TL-WR841N/ND v7") - name="tl-wr841n-v7" - ;; - *"TL-WR841N/ND v8") - name="tl-wr841n-v8" - ;; - *"TL-WR841N/ND v9") - name="tl-wr841n-v9" - ;; - *"TL-WR842N/ND v2") - name="tl-wr842n-v2" - ;; - *"TL-WR842N/ND v3") - name="tl-wr842n-v3" - ;; - *"TL-WR902AC v1") - name="tl-wr902ac-v1" - ;; - *"TL-WR940N v4") - name="tl-wr940n-v4" - ;; - *"TL-WR940N v6") - name="tl-wr940n-v6" - ;; - *"TL-WR941N/ND v5") - name="tl-wr941nd-v5" - ;; - *"TL-WR941N/ND v6") - name="tl-wr941nd-v6" - ;; - *"TL-WR941ND") - name="tl-wr941nd" - ;; - *"TL-WR942N v1") - name="tl-wr942n-v1" - ;; - *"TS-D084") - name="ts-d084" - ;; - *"Tube2H") - name="tube2h" - ;; - *"UniFi") - name="unifi" - ;; - *"UniFi AP Pro") - name="uap-pro" - ;; - *"UniFi-AC-LITE/MESH") - name="unifiac-lite" - ubnt_unifi_ac_board_detect - ;; - *"UniFi-AC-PRO/MESH-PRO") - name="unifiac-pro" - ubnt_unifi_ac_board_detect - ;; - *"UniFiAP Outdoor") - name="unifi-outdoor" - ;; - *"UniFiAP Outdoor+") - name="unifi-outdoor-plus" - ;; - *"WAM250") - name="wam250" - ;; - *"WBS210") - name="wbs210" - tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')" - ;; - *"WBS510") - name="wbs510" - tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')" - ;; - "WeIO"*) - name="weio" - ;; - *"WI2A-AC200i") - name="wi2a-ac200i" - ;; - *"WHR-G301N") - name="whr-g301n" - ;; - *"WHR-HP-G300N") - name="whr-hp-g300n" - ;; - *"WHR-HP-GN") - name="whr-hp-gn" - ;; - *"WiFi Pineapple NANO") - name="wifi-pineapple-nano" - ;; - *"WLAE-AG300N") - name="wlae-ag300n" - ;; - *"WLR-8100") - name="wlr8100" - ;; - *"WNDAP360") - name="wndap360" - ;; - *"WNDR3700/WNDR3800/WNDRMAC") - wndr3700_board_detect "$machine" - ;; - *"WNDR3700v4") - name="wndr3700v4" - ;; - *"WNDR4300") - name="wndr4300" - ;; - *"WNR1000 V2") - name="wnr1000-v2" - ;; - *"WNR2000") - name="wnr2000" - ;; - *"WNR2000 V3") - name="wnr2000-v3" - ;; - *"WNR2000 V4") - name="wnr2000-v4" - ;; - *"WNR2200") - name="wnr2200" - ;; - *"WNR612 V2") - name="wnr612-v2" - ;; - *"WP543") - name="wp543" - ;; - *"WPE72") - name="wpe72" - ;; - *"WPJ342") - name="wpj342" - ;; - *"WPJ344") - name="wpj344" - ;; - *"WPJ531") - name="wpj531" - ;; - *"WPJ558") - name="wpj558" - ;; - *"WPJ563") - name="wpj563" - ;; - *"WPN824N") - name="wpn824n" - ;; - *"WRT160NL") - name="wrt160nl" - ;; - *"WRT400N") - name="wrt400n" - ;; - *"WRTnode2Q"*) - name="wrtnode2q" - ;; - *"WZR-450HP2") - name="wzr-450hp2" - ;; - *"WZR-HP-AG300H/WZR-600DHP") - name="wzr-hp-ag300h" - ;; - *"WZR-HP-G300NH") - name="wzr-hp-g300nh" - ;; - *"WZR-HP-G300NH2") - name="wzr-hp-g300nh2" - ;; - *"WZR-HP-G450H") - name="wzr-hp-g450h" - ;; - *"XD3200") - name="xd3200" - ;; - *"Z1") - name="z1" - ;; - *"ZBT-WE1526") - name="zbt-we1526" - ;; - *"ZCN-1523H-2") - name="zcn-1523h-2" - ;; - *"ZCN-1523H-5") - name="zcn-1523h-5" - ;; - esac - - [ -z "$AR71XX_MODEL" ] && [ "${machine:0:8}" = 'TP-LINK ' ] && \ - tplink_board_detect "$machine" - - [ -z "$name" ] && name="unknown" - - [ -z "$AR71XX_BOARD_NAME" ] && AR71XX_BOARD_NAME="$name" - [ -z "$AR71XX_MODEL" ] && AR71XX_MODEL="$machine" - - [ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/" - - echo "$AR71XX_BOARD_NAME" > /tmp/sysinfo/board_name - echo "$AR71XX_MODEL" > /tmp/sysinfo/model -} diff --git a/target/linux/ar71xx/base-files/lib/preinit/01_preinit_do_ar71xx.sh b/target/linux/ar71xx/base-files/lib/preinit/01_preinit_do_ar71xx.sh deleted file mode 100644 index ff5407a0d4..0000000000 --- a/target/linux/ar71xx/base-files/lib/preinit/01_preinit_do_ar71xx.sh +++ /dev/null @@ -1,9 +0,0 @@ -#!/bin/sh - -do_ar71xx() { - . /lib/ar71xx.sh - - ar71xx_board_detect -} - -boot_hook_add preinit_main do_ar71xx diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx deleted file mode 100644 index b0aa150817..0000000000 --- a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx +++ /dev/null @@ -1,60 +0,0 @@ -# -# Copyright (C) 2009 OpenWrt.org -# - -fetch_mac_from_mtd() { - local mtd_part=$1 - local lan_env=$2 - local wan_env=$3 - local mtd mac - - mtd=$(grep $mtd_part /proc/mtd | cut -d: -f1) - [ -z $mtd ] && return - - mac=$(grep $lan_env /dev/$mtd | cut -d= -f2) - [ ! -z $mac ] && ifconfig eth0 hw ether $mac 2>/dev/null - - mac=$(grep $wan_env /dev/$mtd | cut -d= -f2) - [ ! -z $mac ] && ifconfig eth1 hw ether $mac 2>/dev/null -} - -preinit_set_mac_address() { - . /lib/functions.sh - - case $(board_name) in - c-55|\ - c-60) - mac_lan=$(mtd_get_mac_binary art 0x0) - [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan" - ;; - dir-615-c1|\ - tew-632brp) - fetch_mac_from_mtd config lan_mac wan_mac - ;; - dir-615-i1) - fetch_mac_from_mtd nvram sys_lan_mac sys_wan_mac - ;; - mr18|\ - z1) - mac_lan=$(mtd_get_mac_binary_ubi board-config 0x66) - [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan" - ;; - r6100) - mac_lan=$(mtd_get_mac_binary caldata 0x0) - [ -n "$mac_lan" ] && ifconfig eth1 hw ether "$mac_lan" - mac_wan=$(mtd_get_mac_binary caldata 0x6) - [ -n "$mac_wan" ] && ifconfig eth0 hw ether "$mac_wan" - ;; - rambutan) - mac_lan=$(mtd_get_mac_binary art 0x0) - [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan" - mac_wan=$(mtd_get_mac_binary art 0x6) - [ -n "$mac_wan" ] && ifconfig eth1 hw ether "$mac_wan" - ;; - wrt160nl) - fetch_mac_from_mtd nvram lan_hwaddr wan_hwaddr - ;; - esac -} - -boot_hook_add preinit_main preinit_set_mac_address diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx deleted file mode 100644 index 68875fa1ec..0000000000 --- a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx +++ /dev/null @@ -1,57 +0,0 @@ -#!/bin/sh - -# -# Copyright (C) 2009 OpenWrt.org -# - -set_preinit_iface() { - . /lib/functions.sh - - case $(board_name) in - alfa-ap96|\ - alfa-nx|\ - ap135-020|\ - ap136-020|\ - ap147-010|\ - archer-c5|\ - archer-c7|\ - bhr-4grv2|\ - dir-505-a1|\ - gl-ar750|\ - gl-inet|\ - jwap003|\ - pb42|\ - pb44|\ - rb-433|\ - rb-433u|\ - rb-435g|\ - rb-450|\ - rb-450g|\ - routerstation|\ - routerstation-pro|\ - smart-300|\ - tl-mr3420-v2|\ - tl-wdr4900-v2|\ - tl-wr1043nd-v2|\ - tl-wr710n|\ - tl-wr720n-v3|\ - tl-wr841n-v8|\ - tl-wr842n-v2|\ - tl-wr940n-v4|\ - tl-wr940n-v6|\ - tl-wr941nd-v6|\ - wnr1000-v2|\ - wnr2000-v3|\ - wnr2200|\ - wnr612-v2|\ - wpe72|\ - wpn824n) - ifname=eth1 - ;; - *) - ifname=eth0 - ;; - esac -} - -boot_hook_add preinit_main set_preinit_iface diff --git a/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k b/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k deleted file mode 100644 index cc3dc42c9c..0000000000 --- a/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k +++ /dev/null @@ -1,50 +0,0 @@ -#!/bin/sh - -. /lib/functions.sh -. /lib/functions/system.sh - -do_patch_ath10k_firmware() { - local firmware_file="/lib/firmware/ath10k/QCA988X/hw2.0/firmware-5.bin" - - # bail out if firmware does not exist - [ -f "$firmware_file" ] || return - - local mac_offset=276 - local mac_length=6 - local default_mac="00:03:07:12:34:56" - local current_mac="$(hexdump -v -n $mac_length -s $mac_offset -e '5/1 "%02x:" 1/1 "%02x"' $firmware_file 2>/dev/null)" - - # check if mac address was already patched - [ "$default_mac" = "$current_mac" ] || return - - # some boards have bogus mac in otp (= directly in the PCIe card's EEPROM). - # we have to patch the default mac in the firmware because we cannot change - # the otp. - case $(board_name) in - dgl-5500-a1|\ - tew-823dru) - local mac - mac=$(mtd_get_mac_ascii nvram wlan1_mac) - - cp $firmware_file /tmp/ath10k-firmware.bin - macaddr_2bin $mac | dd of=/tmp/ath10k-firmware.bin \ - conv=notrunc bs=1 seek=$mac_offset count=$mac_length - ;; - esac - - [ -f /tmp/ath10k-firmware.bin ] || return - - cp /tmp/ath10k-firmware.bin $firmware_file - rm /tmp/ath10k-firmware.bin -} - -check_patch_ath10k_firmware() { - case $(board_name) in - dgl-5500-a1|\ - tew-823dru) - do_patch_ath10k_firmware - ;; - esac -} - -boot_hook_add preinit_main check_patch_ath10k_firmware diff --git a/target/linux/ar71xx/base-files/lib/upgrade/allnet.sh b/target/linux/ar71xx/base-files/lib/upgrade/allnet.sh deleted file mode 100644 index 5295d8cfe0..0000000000 --- a/target/linux/ar71xx/base-files/lib/upgrade/allnet.sh +++ /dev/null @@ -1,155 +0,0 @@ -# The U-Boot loader of the some Allnet devices requires image sizes and -# checksums to be provided in the U-Boot environment. -# In case the check fails during boot, a failsafe-system is started to provide -# a minimal web-interface for flashing a new firmware. - -# determine size of the main firmware partition -platform_get_firmware_size() { - local dev size erasesize name - while read dev size erasesize name; do - name=${name#'"'}; name=${name%'"'} - case "$name" in - firmware) - printf "%d" "0x$size" - break - ;; - esac - done < /proc/mtd -} - -# get the first 4 bytes (magic) of a given file starting at offset in hex format -get_magic_long_at() { - dd if="$1" skip=$(( $CI_BLKSZ / 4 * $2 )) bs=4 count=1 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -get_filesize() { - wc -c "$1" | while read image_size _n ; do echo $image_size ; break; done -} - -# scan through the update image pages until matching a magic -platform_get_offset() { - offsetcount=0 - magiclong="x" - if [ -n "$3" ]; then - offsetcount=$3 - fi - while magiclong=$( get_magic_long_at "$1" "$offsetcount" ) && [ -n "$magiclong" ]; do - case "$magiclong" in - "2705"*) - # U-Boot image magic - if [ "$2" = "uImage" ]; then - echo $offsetcount - return - fi - ;; - "68737173"|"73717368") - # SquashFS - if [ "$2" = "rootfs" ]; then - echo $offsetcount - return - fi - ;; - "deadc0de"|"19852003") - # JFFS2 empty page - if [ "$2" = "rootfs-data" ]; then - echo $offsetcount - return - fi - ;; - esac - offsetcount=$(( $offsetcount + 1 )) - done -} - -platform_check_image_allnet() { - local fw_printenv=/usr/sbin/fw_printenv - [ ! -n "$fw_printenv" -o ! -x "$fw_printenv" ] && { - echo "Please install uboot-envtools!" - return 1 - } - - [ ! -r "/etc/fw_env.config" ] && { - echo "/etc/fw_env.config is missing" - return 1 - } - - local image_size=$( get_filesize "$1" ) - local firmware_size=$( platform_get_firmware_size ) - [ $image_size -ge $firmware_size ] && - { - echo "upgrade image is too big (${image_size}b > ${firmware_size}b)" - } - - local vmlinux_blockoffset=$( platform_get_offset "$1" uImage ) - [ -z $vmlinux_blockoffset ] && { - echo "vmlinux-uImage not found" - return 1 - } - - local rootfs_blockoffset=$( platform_get_offset "$1" rootfs "$vmlinux_blockoffset" ) - [ -z $rootfs_blockoffset ] && { - echo "missing rootfs" - return 1 - } - - local data_blockoffset=$( platform_get_offset "$1" rootfs-data "$rootfs_blockoffset" ) - [ -z $data_blockoffset ] && { - echo "rootfs doesn't have JFFS2 end marker" - return 1 - } - - return 0 -} - -platform_do_upgrade_allnet() { - local firmware_base_addr=$( printf "%d" "$1" ) - local vmlinux_blockoffset=$( platform_get_offset "$2" uImage ) - if [ ! -n "$vmlinux_blockoffset" ]; then - echo "can't determine uImage offset" - return 1 - fi - local rootfs_blockoffset=$( platform_get_offset "$2" rootfs $(( $vmlinux_blockoffset + 1 )) ) - local vmlinux_offset=$(( $vmlinux_blockoffset * $CI_BLKSZ )) - local vmlinux_addr=$(( $firmware_base_addr + $vmlinux_offset )) - local vmlinux_hexaddr=0x$( printf "%08x" "$vmlinux_addr" ) - if [ ! -n "$rootfs_blockoffset" ]; then - echo "can't determine rootfs offset" - return 1 - fi - local rootfs_offset=$(( $rootfs_blockoffset * $CI_BLKSZ )) - local rootfs_addr=$(( $firmware_base_addr + $rootfs_offset )) - local rootfs_hexaddr=0x$( printf "%08x" "$rootfs_addr" ) - local vmlinux_blockcount=$(( $rootfs_blockoffset - $vmlinux_blockoffset )) - local vmlinux_size=$(( $rootfs_offset - $vmlinux_offset )) - local vmlinux_hexsize=0x$( printf "%08x" "$vmlinux_size" ) - local data_blockoffset=$( platform_get_offset "$2" rootfs-data $(( $rootfs_blockoffset + 1 )) ) - if [ ! -n "$data_blockoffset" ]; then - echo "can't determine rootfs size" - return 1 - fi - local data_offset=$(( $data_blockoffset * $CI_BLKSZ )) - local rootfs_blockcount=$(( $data_blockoffset - $rootfs_blockoffset )) - local rootfs_size=$(( $data_offset - $rootfs_offset )) - local rootfs_hexsize=0x$( printf "%08x" "$rootfs_size" ) - - local rootfs_md5=$( dd if="$2" bs=$CI_BLKSZ skip=$rootfs_blockoffset count=$rootfs_blockcount 2>/dev/null | md5sum -); rootfs_md5="${rootfs_md5%% *}" - local vmlinux_md5=$( dd if="$2" bs=$CI_BLKSZ skip=$vmlinux_blockoffset count=$vmlinux_blockcount 2>/dev/null | md5sum -); vmlinux_md5="${vmlinux_md5%% *}" - # this needs a recent version of uboot-envtools! - cat >/tmp/fw_env_upgrade <<EOF -vmlinux_start_addr $vmlinux_hexaddr -vmlinux_size $vmlinux_hexsize -vmlinux_checksum $vmlinux_md5 -rootfs_start_addr $rootfs_hexaddr -rootfs_size $rootfs_hexsize -rootfs_checksum $rootfs_md5 -bootcmd bootm $vmlinux_hexaddr -EOF - - mkdir -p /var/lock - fw_setenv -s /tmp/fw_env_upgrade || { - echo "failed to update U-Boot environment" - return 1 - } - shift - default_do_upgrade "$@" -} diff --git a/target/linux/ar71xx/base-files/lib/upgrade/dir825.sh b/target/linux/ar71xx/base-files/lib/upgrade/dir825.sh deleted file mode 100644 index e991a06b7a..0000000000 --- a/target/linux/ar71xx/base-files/lib/upgrade/dir825.sh +++ /dev/null @@ -1,165 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2012 OpenWrt.org -# - -. /lib/functions.sh -. /lib/ar71xx.sh - -get_magic_at() { - local mtddev=$1 - local pos=$2 - dd bs=1 count=2 skip=$pos if=$mtddev 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -dir825b_is_caldata_valid() { - local mtddev=$1 - local magic - - magic=$(get_magic_at $mtddev 4096) - [ "$magic" != "a55a" ] && return 0 - - magic=$(get_magic_at $mtddev 20480) - [ "$magic" != "a55a" ] && return 0 - - return 1 -} - -dir825b_copy_caldata() { - local cal_src=$1 - local cal_dst=$2 - local mtd_src - local mtd_dst - local md5_src - local md5_dst - - mtd_src=$(find_mtd_part $cal_src) - [ -z "$mtd_src" ] && { - echo "no $cal_src partition found" - return 1 - } - - mtd_dst=$(find_mtd_part $cal_dst) - [ -z "$mtd_dst" ] && { - echo "no $cal_dst partition found" - return 1 - } - - dir825b_is_caldata_valid "$mtd_src" && { - echo "no valid calibration data found in $cal_src" - return 1 - } - - dir825b_is_caldata_valid "$mtd_dst" && { - echo "Copying calibration data from $cal_src to $cal_dst..." - dd if="$mtd_src" 2>/dev/null | mtd -q -q write - "$cal_dst" - } - - md5_src=$(md5sum "$mtd_src") && md5_src="${md5_src%% *}" - md5_dst=$(md5sum "$mtd_dst") && md5_dst="${md5_dst%% *}" - - [ "$md5_src" != "$md5_dst" ] && { - echo "calibration data mismatch $cal_src:$md5_src $cal_dst:$md5_dst" - return 1 - } - - return 0 -} - -dir825b_do_upgrade_combined() { - local fw_part=$1 - local fw_file=$2 - local fw_mtd=$(find_mtd_part $fw_part) - local fw_length=0x$(dd if="$fw_file" bs=2 skip=1 count=4 2>/dev/null) - local fw_blocks=$(($fw_length / 65536)) - - if [ -n "$fw_mtd" ] && [ ${fw_blocks:-0} -gt 0 ]; then - local append="" - [ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP" - - sync - dd if="$fw_file" bs=64k skip=1 count=$fw_blocks 2>/dev/null | \ - mtd $append write - "$fw_part" - fi -} - -dir825b_check_image() { - local magic="$(get_magic_long "$1")" - local fw_mtd=$(find_mtd_part "firmware_orig") - - case "$magic" in - "27051956") - ;; - "43493030") - local md5_img=$(dd if="$1" bs=2 skip=9 count=16 2>/dev/null) - local md5_chk=$(dd if="$1" bs=64k skip=1 2>/dev/null | md5sum -); md5_chk="${md5_chk%% *}" - local fw_len=$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null) - local fw_part_len=$(mtd_get_part_size "firmware") - - if [ -z "$fw_mtd" ]; then - ask_bool 0 "Do you have a backup of the caldata partition?" || { - echo "Warning, please make sure that you have a backup of the caldata partition." - echo "Once you have that, use 'sysupgrade -i' for upgrading to the 'fat' firmware." - return 1 - } - fi - - if [ -z "$md5_img" -o -z "$md5_chk" ]; then - echo "Unable to get image checksums. Maybe you are using a streamed image?" - return 1 - fi - - if [ "$md5_img" != "$md5_chk" ]; then - echo "Invalid image. Contents do not match checksum (image:$md5_img calculated:$md5_chk)" - return 1 - fi - - fw_len=$((0x$fw_len)) - fw_part_len=${fw_part_len:-0} - - if [ $fw_part_len -lt $fw_len ]; then - echo "The upgrade image is too big (size:$fw_len available:$fw_part_len)" - return 1 - fi - ;; - *) - echo "Unsupported image format." - return 1 - ;; - esac - - return 0 -} - -platform_do_upgrade_dir825b() { - local magic="$(get_magic_long "$1")" - local fw_mtd=$(find_mtd_part "firmware_orig") - - case "$magic" in - "27051956") - if [ -n "$fw_mtd" ]; then - # restore calibration data before downgrading to - # the normal image - dir825b_copy_caldata "caldata" "caldata_orig" || { - echo "unable to restore calibration data" - exit 1 - } - PART_NAME="firmware_orig" - else - PART_NAME="firmware" - fi - default_do_upgrade "$1" - ;; - "43493030") - if [ -z "$fw_mtd" ]; then - # backup calibration data before upgrading to the - # fat image - dir825b_copy_caldata "caldata" "caldata_copy" || { - echo "unable to backup calibration data" - exit 1 - } - fi - dir825b_do_upgrade_combined "firmware" "$1" - ;; - esac -} diff --git a/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh b/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh deleted file mode 100644 index dfc57b23f5..0000000000 --- a/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh +++ /dev/null @@ -1,165 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2015-2016 Chris Blake <chrisrblake93@gmail.com> -# -# Custom upgrade script for Meraki NAND devices (ex. MR18) -# Based on dir825.sh and stock nand functions -# -. /lib/ar71xx.sh -. /lib/functions.sh - -get_magic_at() { - local mtddev=$1 - local pos=$2 - dd bs=1 count=2 skip=$pos if=$mtddev 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -meraki_is_caldata_valid() { - local board=$1 - local mtddev=$2 - local magic - - case "$board" in - "mr18") - magic=$(get_magic_at $mtddev 4096) - [ "$magic" != "0202" ] && return 0 - - magic=$(get_magic_at $mtddev 20480) - [ "$magic" != "0202" ] && return 0 - - magic=$(get_magic_at $mtddev 36864) - [ "$magic" != "0202" ] && return 0 - - return 1 - ;; - "z1") - magic=$(get_magic_at $mtddev 4096) - [ "$magic" != "0202" ] && return 0 - - magic=$(get_magic_at $mtddev 86016) - [ "$magic" != "a55a" ] && return 0 - - return 1 - ;; - *) - return 1 - ;; - esac -} - -merakinand_copy_caldata() { - local cal_src=$1 - local cal_dst=$2 - local ubidev="$(nand_find_ubi $CI_UBIPART)" - local board_name="$(board_name)" - local rootfs_size="$(ubinfo /dev/ubi0 -N rootfs_data | grep "Size" | awk '{ print $6 }')" - - # Setup partitions using board name, in case of future platforms - case "$board_name" in - "mr18"|\ - "z1") - # Src is MTD - mtd_src="$(find_mtd_chardev $cal_src)" - [ -n "$mtd_src" ] || { - echo "no mtd device found for partition $cal_src" - exit 1 - } - - # Dest is UBI - # TODO: possibly add create (hard to do when rootfs_data is expanded & mounted) - # Would need to be done from ramdisk - mtd_dst="$(nand_find_volume $ubidev $cal_dst)" - [ -n "$mtd_dst" ] || { - echo "no ubi device found for partition $cal_dst" - exit 1 - } - - meraki_is_caldata_valid "$board_name" "$mtd_src" && { - echo "no valid calibration data found in $cal_src" - exit 1 - } - - meraki_is_caldata_valid "$board_name" "/dev/$mtd_dst" && { - echo "Copying calibration data from $cal_src to $cal_dst..." - dd if="$mtd_src" of=/tmp/caldata.tmp 2>/dev/null - ubiupdatevol "/dev/$mtd_dst" /tmp/caldata.tmp - rm /tmp/caldata.tmp - sync - } - return 0 - ;; - *) - echo "Unsupported device $board_name"; - return 1 - ;; - esac -} - -merakinand_do_kernel_check() { - local board_name="$1" - local tar_file="$2" - local image_magic_word=`(tar xf $tar_file sysupgrade-$board_name/kernel -O 2>/dev/null | dd bs=1 count=4 skip=0 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"')` - - # What is our kernel magic string? - case "$board_name" in - "mr18") - [ "$image_magic_word" == "8e73ed8a" ] && { - echo "pass" && return 0 - } - ;; - "z1") - [ "$image_magic_word" == "4d495053" ] && { - echo "pass" && return 0 - } - ;; - esac - - exit 1 -} - -merakinand_do_platform_check() { - local board_name="$1" - local tar_file="$2" - local control_length=`(tar xf $tar_file sysupgrade-$board_name/CONTROL -O | wc -c) 2> /dev/null` - local file_type="$(identify_tar $2 sysupgrade-$board_name/root)" - local kernel_magic="$(merakinand_do_kernel_check $1 $2)" - - case "$board_name" in - "mr18"|\ - "z1") - [ "$control_length" = 0 -o "$file_type" != "squashfs" -o "$kernel_magic" != "pass" ] && { - echo "Invalid sysupgrade file for $board_name" - return 1 - } - ;; - *) - echo "Unsupported device $board_name"; - return 1 - ;; - esac - - return 0 -} - -merakinand_do_upgrade() { - local tar_file="$1" - local board_name="$(board_name)" - - # Do we need to do any platform tweaks? - case "$board_name" in - "mr18") - # Check and create UBI caldata if it's invalid - merakinand_copy_caldata "odm-caldata" "caldata" - nand_do_upgrade $1 - ;; - "z1") - # Check and create UBI caldata if it's invalid - merakinand_copy_caldata "origcaldata" "caldata" - nand_do_upgrade $1 - ;; - *) - echo "Unsupported device $board_name"; - exit 1 - ;; - esac -} diff --git a/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh b/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh deleted file mode 100644 index f43bdcea7f..0000000000 --- a/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh +++ /dev/null @@ -1,232 +0,0 @@ -# The U-Boot loader of the OpenMesh devices requires image sizes and -# checksums to be provided in the U-Boot environment. -# The OpenMesh devices come with 2 main partitions - while one is active -# sysupgrade will flash the other. The boot order is changed to boot the -# newly flashed partition. If the new partition can't be booted due to -# upgrade failures the previously used partition is loaded. - -trim() -{ - echo $1 -} - -cfg_value_get() -{ - local cfg=$1 cfg_opt - local section=$2 our_section=0 - local param=$3 our_param= - - for cfg_opt in $cfg - do - [ "$cfg_opt" = "[$section]" ] && our_section=1 && continue - [ "$our_section" = "1" ] || continue - - our_param=$(echo ${cfg_opt%%=*}) - [ "$param" = "$our_param" ] && echo ${cfg_opt##*=} && break - done -} - -platform_check_image_target_openmesh() -{ - img_board_target="$1" - - case "$img_board_target" in - A60) - [ "$board" = "a40" ] && return 0 - [ "$board" = "a60" ] && return 0 - echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" - return 1 - ;; - OM2P) - [ "$board" = "om2p" ] && return 0 - [ "$board" = "om2pv2" ] && return 0 - [ "$board" = "om2pv4" ] && return 0 - [ "$board" = "om2p-lc" ] && return 0 - [ "$board" = "om2p-hs" ] && return 0 - [ "$board" = "om2p-hsv2" ] && return 0 - [ "$board" = "om2p-hsv3" ] && return 0 - [ "$board" = "om2p-hsv4" ] && return 0 - echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" - return 1 - ;; - OM5P) - [ "$board" = "om5p" ] && return 0 - [ "$board" = "om5p-an" ] && return 0 - echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" - return 1 - ;; - OM5PAC) - [ "$board" = "om5p-ac" ] && return 0 - [ "$board" = "om5p-acv2" ] && return 0 - echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" - return 1 - ;; - MR1750) - [ "$board" = "mr1750" ] && return 0 - [ "$board" = "mr1750v2" ] && return 0 - echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" - return 1 - ;; - MR600) - [ "$board" = "mr600" ] && return 0 - [ "$board" = "mr600v2" ] && return 0 - echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" - return 1 - ;; - MR900) - [ "$board" = "mr900" ] && return 0 - [ "$board" = "mr900v2" ] && return 0 - echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" - return 1 - ;; - *) - echo "Invalid board target ($img_board_target). Use the correct image for this platform" - return 1 - ;; - esac -} - -platform_check_image_openmesh() -{ - local img_magic=$1 - local img_path=$2 - local fw_printenv=/usr/sbin/fw_printenv - local img_board_target= img_num_files= i=0 - local cfg_name= kernel_name= rootfs_name= - - case "$img_magic" in - # Combined Extended Image v1 - 43453031) - img_board_target=$(trim $(dd if="$img_path" bs=4 skip=1 count=8 2>/dev/null)) - img_num_files=$(trim $(dd if="$img_path" bs=2 skip=18 count=1 2>/dev/null)) - ;; - *) - echo "Invalid image ($img_magic). Use combined extended images on this platform" - return 1 - ;; - esac - - platform_check_image_target_openmesh "$img_board_target" || return 1 - - [ $img_num_files -lt 3 ] && { - echo "Invalid number of embedded images ($img_num_files). Use the correct image for this platform" - return 1 - } - - cfg_name=$(trim $(dd if="$img_path" bs=2 skip=19 count=16 2>/dev/null)) - - [ "$cfg_name" != "fwupgrade.cfg" ] && { - echo "Invalid embedded config file ($cfg_name). Use the correct image for this platform" - return 1 - } - - kernel_name=$(trim $(dd if="$img_path" bs=2 skip=55 count=16 2>/dev/null)) - - [ "$kernel_name" != "kernel" ] && { - echo "Invalid embedded kernel file ($kernel_name). Use the correct image for this platform" - return 1 - } - - rootfs_name=$(trim $(dd if="$img_path" bs=2 skip=91 count=16 2>/dev/null)) - - [ "$rootfs_name" != "rootfs" ] && { - echo "Invalid embedded kernel file ($rootfs_name). Use the correct image for this platform" - return 1 - } - - [ ! -x "$fw_printenv" ] && { - echo "Please install uboot-envtools!" - return 1 - } - - [ ! -r "/etc/fw_env.config" ] && { - echo "/etc/fw_env.config is missing" - return 1 - } - - return 0 -} - -platform_do_upgrade_openmesh() -{ - local img_path=$1 img_board_target= - local kernel_start_addr= kernel_start_addr1= kernel_start_addr2= - local kernel_size= kernel_md5= - local rootfs_size= rootfs_checksize= rootfs_md5= - local kernel_bsize= total_size= - local data_offset=$((64 * 1024)) block_size= offset= - local uboot_env_upgrade="/tmp/fw_env_upgrade" - local cfg_size= kernel_size= rootfs_size= - local append="" - - [ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP" - - cfg_size=$(dd if="$img_path" bs=2 skip=35 count=4 2>/dev/null) - kernel_size=$(dd if="$img_path" bs=2 skip=71 count=4 2>/dev/null) - rootfs_size=$(dd if="$img_path" bs=2 skip=107 count=4 2>/dev/null) - - img_board_target=$(trim $(dd if="$img_path" bs=4 skip=1 count=8 2>/dev/null)) - cfg_content=$(dd if="$img_path" bs=1 skip=$data_offset count=$(echo $((0x$cfg_size))) 2>/dev/null) - - case $img_board_target in - OM2P) - block_size=$((256 * 1024)) - total_size=7340032 - kernel_start_addr1=0x9f1c0000 - kernel_start_addr2=0x9f8c0000 - ;; - OM5P|OM5PAC|MR600|MR900|MR1750|A60) - block_size=$((64 * 1024)) - total_size=7995392 - kernel_start_addr1=0x9f0b0000 - kernel_start_addr2=0x9f850000 - ;; - esac - - kernel_md5=$(cfg_value_get "$cfg_content" "vmlinux" "md5sum") - rootfs_md5=$(cfg_value_get "$cfg_content" "rootfs" "md5sum") - rootfs_checksize=$(cfg_value_get "$cfg_content" "rootfs" "checksize") - - if [ "$((0x$kernel_size % $block_size))" = "0" ] - then - kernel_bsize=$(echo $((0x$kernel_size))) - else - kernel_bsize=$((0x$kernel_size + ($block_size - (0x$kernel_size % $block_size)))) - fi - - mtd -q erase inactive - - offset=$(echo $(($data_offset + 0x$cfg_size + 0x$kernel_size))) - dd if="$img_path" bs=1 skip=$offset count=$(echo $((0x$rootfs_size))) 2>&- | mtd -n -p $kernel_bsize $append write - "inactive" - - offset=$(echo $(($data_offset + 0x$cfg_size))) - dd if="$img_path" bs=1 skip=$offset count=$(echo $((0x$kernel_size))) 2>&- | mtd -n write - "inactive" - - rm $uboot_env_upgrade 2>&- - - if [ "$(grep 'mtd3:.*inactive' /proc/mtd)" ] - then - printf "kernel_size_1 %u\n" $(($kernel_bsize / 1024)) >> $uboot_env_upgrade - printf "rootfs_size_1 %u\n" $((($total_size - $kernel_bsize) / 1024)) >> $uboot_env_upgrade - printf "bootseq 1,2\n" >> $uboot_env_upgrade - kernel_start_addr=$kernel_start_addr1 - else - printf "kernel_size_2 %u\n" $(($kernel_bsize / 1024)) >> $uboot_env_upgrade - printf "rootfs_size_2 %u\n" $((($total_size - $kernel_bsize) / 1024)) >> $uboot_env_upgrade - printf "bootseq 2,1\n" >> $uboot_env_upgrade - kernel_start_addr=$kernel_start_addr2 - fi - - printf "vmlinux_start_addr %s\n" $kernel_start_addr >> $uboot_env_upgrade - printf "vmlinux_size 0x%s\n" $kernel_size >> $uboot_env_upgrade - printf "vmlinux_checksum %s\n" $kernel_md5 >> $uboot_env_upgrade - printf "rootfs_start_addr 0x%x\n" $(($kernel_start_addr + $kernel_bsize)) >> $uboot_env_upgrade - printf "rootfs_size %s\n" $rootfs_checksize >> $uboot_env_upgrade - printf "rootfs_checksum %s\n" $rootfs_md5 >> $uboot_env_upgrade - - mkdir -p /var/lock - fw_setenv -s $uboot_env_upgrade || { - echo "failed to update U-Boot environment" - return 1 - } -} diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh deleted file mode 100755 index 2391a1de8a..0000000000 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ /dev/null @@ -1,915 +0,0 @@ -# -# Copyright (C) 2011 OpenWrt.org -# - -. /lib/functions/system.sh -. /lib/ar71xx.sh - -PART_NAME=firmware -RAMFS_COPY_DATA='/lib/ar71xx.sh /etc/fw_env.config /var/lock/fw_printenv.lock' -RAMFS_COPY_BIN='nandwrite fw_printenv fw_setenv' - -CI_BLKSZ=65536 -CI_LDADR=0x80060000 - -PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=0 - -platform_find_partitions() { - local first dev size erasesize name - while read dev size erasesize name; do - name=${name#'"'}; name=${name%'"'} - case "$name" in - vmlinux.bin.l7|vmlinux|kernel|linux|linux.bin|rootfs|filesystem) - if [ -z "$first" ]; then - first="$name" - else - echo "$erasesize:$first:$name" - break - fi - ;; - esac - done < /proc/mtd -} - -platform_find_kernelpart() { - local part - for part in "${1%:*}" "${1#*:}"; do - case "$part" in - vmlinux.bin.l7|vmlinux|kernel|linux|linux.bin) - echo "$part" - break - ;; - esac - done -} - -platform_find_rootfspart() { - local part - for part in "${1%:*}" "${1#*:}"; do - [ "$part" != "$2" ] && echo "$part" && break - done -} - -platform_do_upgrade_combined() { - local partitions=$(platform_find_partitions) - local kernelpart=$(platform_find_kernelpart "${partitions#*:}") - local erase_size=$((0x${partitions%%:*})); partitions="${partitions#*:}" - local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null) - local kern_blocks=$(($kern_length / $CI_BLKSZ)) - local root_blocks=$((0x$(dd if="$1" bs=2 skip=5 count=4 2>/dev/null) / $CI_BLKSZ)) - - if [ -n "$partitions" ] && [ -n "$kernelpart" ] && \ - [ ${kern_blocks:-0} -gt 0 ] && \ - [ ${root_blocks:-0} -gt 0 ] && \ - [ ${erase_size:-0} -gt 0 ]; - then - local rootfspart=$(platform_find_rootfspart "$partitions" "$kernelpart") - local append="" - [ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP" - - if [ "$PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD" -ne 1 ]; then - ( dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null; \ - dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null ) | \ - mtd -r $append -F$kernelpart:$kern_length:$CI_LDADR,rootfs write - $partitions - elif [ -n "$rootfspart" ]; then - dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null | \ - mtd write - $kernelpart - dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null | \ - mtd -r $append write - $rootfspart - fi - fi - PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=0 -} - -tplink_get_image_hwid() { - get_image "$@" | dd bs=4 count=1 skip=16 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -tplink_get_image_mid() { - get_image "$@" | dd bs=4 count=1 skip=17 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -tplink_get_image_boot_size() { - get_image "$@" | dd bs=4 count=1 skip=37 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -tplink_pharos_check_support_list() { - local image="$1" - local offset="$2" - local model="$3" - local trargs="$4" - - # Here $image is given to dd directly instead of using get_image; - # otherwise the skip will take almost a second (as dd can't seek) - dd if="$image" bs=1 skip=$offset count=1024 2>/dev/null | tr -d "$trargs" | ( - while IFS= read -r line; do - [ "$line" = "$model" ] && exit 0 - done - - exit 1 - ) -} - -tplink_pharos_check_image() { - local image_magic="$(get_magic_long "$1")" - local board_magic="$2" - [ "$image_magic" != "$board_magic" ] && { - echo "Invalid image magic '$image_magic'. Expected '$board_magic'." - return 1 - } - - local model_string="$3" - local trargs="$4" - - # New images have the support list at 7802888, old ones at 1511432 - tplink_pharos_check_support_list "$1" 7802888 "$model_string" "$trargs" || \ - tplink_pharos_check_support_list "$1" 1511432 "$model_string" "$trargs" || { - echo "Unsupported image (model not in support-list)" - return 1 - } - - return 0 -} - -seama_get_type_magic() { - get_image "$@" | dd bs=1 count=4 skip=53 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -wrgg_get_image_magic() { - get_image "$@" | dd bs=4 count=1 skip=8 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' -} - -cybertan_get_image_magic() { - get_image "$@" | dd bs=8 count=1 skip=0 2>/dev/null | hexdump -v -n 8 -e '1/1 "%02x"' -} - -cybertan_check_image() { - local magic="$(cybertan_get_image_magic "$1")" - local fw_magic="$(cybertan_get_hw_magic)" - - [ "$fw_magic" != "$magic" ] && { - echo "Invalid image, ID mismatch, got:$magic, but need:$fw_magic" - return 1 - } - - return 0 -} - -platform_do_upgrade_compex() { - local fw_file=$1 - local fw_part=$PART_NAME - local fw_mtd=$(find_mtd_part $fw_part) - local fw_length=0x$(dd if="$fw_file" bs=2 skip=1 count=4 2>/dev/null) - local fw_blocks=$(($fw_length / 65536)) - - if [ -n "$fw_mtd" ] && [ ${fw_blocks:-0} -gt 0 ]; then - local append="" - [ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP" - - sync - dd if="$fw_file" bs=64k skip=1 count=$fw_blocks 2>/dev/null | \ - mtd $append write - "$fw_part" - fi -} - -alfa_check_image() { - local magic_long="$(get_magic_long "$1")" - local fw_part_size=$(mtd_get_part_size firmware) - - case "$magic_long" in - "27051956") - [ "$fw_part_size" != "16318464" ] && { - echo "Invalid image magic \"$magic_long\" for $fw_part_size bytes" - return 1 - } - ;; - "68737173") - [ "$fw_part_size" != "7929856" ] && { - echo "Invalid image magic \"$magic_long\" for $fw_part_size bytes" - return 1 - } - ;; - esac - - return 0 -} - -platform_check_image() { - local board=$(board_name) - local magic="$(get_magic_word "$1")" - local magic_long="$(get_magic_long "$1")" - - [ "$#" -gt 1 ] && return 1 - - case "$board" in - airgateway|\ - airgatewaypro|\ - airrouter|\ - ap121f|\ - ap132|\ - ap531b0|\ - ap90q|\ - archer-c25-v1|\ - archer-c58-v1|\ - archer-c59-v1|\ - archer-c59-v2|\ - archer-c60-v1|\ - archer-c60-v2|\ - archer-c7-v4|\ - archer-c7-v5|\ - arduino-yun|\ - bullet-m|\ - bullet-m-xw|\ - c-55|\ - carambola2|\ - cf-e316n-v2|\ - cf-e320n-v2|\ - cf-e355ac-v1|\ - cf-e355ac-v2|\ - cf-e375ac|\ - cf-e380ac-v1|\ - cf-e380ac-v2|\ - cf-e385ac|\ - cf-e520n|\ - cf-e530n|\ - cpe505n|\ - cpe830|\ - cpe870|\ - dap-1330-a1|\ - dgl-5500-a1|\ - dhp-1565-a1|\ - dir-505-a1|\ - dir-600-a1|\ - dir-615-c1|\ - dir-615-e1|\ - dir-615-e4|\ - dir-615-i1|\ - dir-825-c1|\ - dir-835-a1|\ - dlan-hotspot|\ - dlan-pro-1200-ac|\ - dlan-pro-500-wp|\ - dr342|\ - dr531|\ - dragino2|\ - e1700ac-v2|\ - e558-v2|\ - e600g-v2|\ - e600gac-v2|\ - e750a-v4|\ - e750g-v8|\ - ebr-2310-c1|\ - ens202ext|\ - epg5000|\ - esr1750|\ - esr900|\ - ew-balin|\ - ew-dorin|\ - ew-dorin-router|\ - gl-ar150|\ - gl-ar300m|\ - gl-ar300|\ - gl-ar750|\ - gl-ar750s|\ - gl-domino|\ - gl-mifi|\ - gl-usb150|\ - hiwifi-hc6361|\ - hornet-ub-x2|\ - jwap230|\ - lbe-m5|\ - lima|\ - loco-m-xw|\ - mzk-w04nu|\ - mzk-w300nh|\ - n5q|\ - nanostation-m|\ - nanostation-m-xw|\ - nbg460n_550n_550nh|\ - pqi-air-pen|\ - r36a|\ - r602n|\ - rme-eg200|\ - rocket-m|\ - rocket-m-ti|\ - rocket-m-xw|\ - rw2458n|\ - sc1750|\ - sc300m|\ - sc450|\ - sr3200|\ - t830|\ - tew-632brp|\ - tew-712br|\ - tew-732br|\ - tew-823dru|\ - tl-wr1043n-v5|\ - tl-wr942n-v1|\ - unifi|\ - unifi-outdoor|\ - unifiac-lite|\ - unifiac-pro|\ - wam250|\ - weio|\ - whr-g301n|\ - whr-hp-g300n|\ - whr-hp-gn|\ - wlae-ag300n|\ - wndap360|\ - wpj342|\ - wpj344|\ - wpj531|\ - wpj558|\ - wpj563|\ - wrt400n|\ - wrtnode2q|\ - wzr-450hp2|\ - wzr-hp-ag300h|\ - wzr-hp-g300nh|\ - wzr-hp-g300nh2|\ - wzr-hp-g450h|\ - xd3200) - [ "$magic" != "2705" ] && { - echo "Invalid image type." - return 1 - } - - return 0 - ;; - alfa-ap96|\ - alfa-nx|\ - ap121|\ - ap121-mini|\ - ap135-020|\ - ap136-010|\ - ap136-020|\ - ap147-010|\ - ap152|\ - ap91-5g|\ - ap96|\ - bhr-4grv2|\ - bxu2000n-2-a1|\ - db120|\ - dr344|\ - dw33d|\ - f9k1115v2|\ - hornet-ub|\ - mr12|\ - mr16|\ - zbt-we1526|\ - zcn-1523h-2|\ - zcn-1523h-5) - [ "$magic_long" != "68737173" -a "$magic_long" != "19852003" ] && { - echo "Invalid image type." - return 1 - } - - return 0 - ;; - all0258n|\ - all0315n|\ - cap324|\ - cap4200ag|\ - cr3000|\ - cr5000) - platform_check_image_allnet "$1" && return 0 - return 1 - ;; - all0305|\ - eap300v2|\ - eap7660d|\ - ja76pf|\ - ja76pf2|\ - jwap003|\ - ls-sr71|\ - pb42|\ - pb44|\ - routerstation|\ - routerstation-pro|\ - wp543|\ - wpe72) - [ "$magic" != "4349" ] && { - echo "Invalid image. Use *-sysupgrade.bin files on this board" - return 1 - } - - local md5_img=$(dd if="$1" bs=2 skip=9 count=16 2>/dev/null) - local md5_chk=$(fwtool -q -t -i /dev/null "$1"; dd if="$1" bs=$CI_BLKSZ skip=1 2>/dev/null | md5sum -); md5_chk="${md5_chk%% *}" - - if [ -n "$md5_img" -a -n "$md5_chk" ] && [ "$md5_img" = "$md5_chk" ]; then - return 0 - else - echo "Invalid image. Contents do not match checksum (image:$md5_img calculated:$md5_chk)" - return 1 - fi - - return 0 - ;; - antminer-s1|\ - antminer-s3|\ - antrouter-r1|\ - archer-c5|\ - archer-c7|\ - el-m150|\ - el-mini|\ - gl-inet|\ - lan-turtle|\ - mc-mac1200r|\ - minibox-v1|\ - minibox-v3.2|\ - omy-g1|\ - omy-x1|\ - onion-omega|\ - oolite-v1|\ - oolite-v5.2|\ - oolite-v5.2-dev|\ - packet-squirrel|\ - re355|\ - re450|\ - rut900|\ - smart-300|\ - som9331|\ - tellstick-znet-lite|\ - tl-mr10u|\ - tl-mr11u|\ - tl-mr12u|\ - tl-mr13u|\ - tl-mr3020|\ - tl-mr3040|\ - tl-mr3040-v2|\ - tl-mr3220|\ - tl-mr3220-v2|\ - tl-mr3420|\ - tl-mr3420-v2|\ - tl-mr6400|\ - tl-wa701nd-v2|\ - tl-wa7210n-v2|\ - tl-wa750re|\ - tl-wa7510n|\ - tl-wa801nd-v2|\ - tl-wa801nd-v3|\ - tl-wa830re-v2|\ - tl-wa850re|\ - tl-wa850re-v2|\ - tl-wa855re-v1|\ - tl-wa860re|\ - tl-wa901nd|\ - tl-wa901nd-v2|\ - tl-wa901nd-v3|\ - tl-wa901nd-v4|\ - tl-wa901nd-v5|\ - tl-wdr3320-v2|\ - tl-wdr3500|\ - tl-wdr4300|\ - tl-wdr4900-v2|\ - tl-wdr6500-v2|\ - tl-wpa8630|\ - tl-wr1041n-v2|\ - tl-wr1043nd|\ - tl-wr1043nd-v2|\ - tl-wr1043nd-v4|\ - tl-wr2543n|\ - tl-wr703n|\ - tl-wr710n|\ - tl-wr720n-v3|\ - tl-wr740n-v6|\ - tl-wr741nd|\ - tl-wr741nd-v4|\ - tl-wr802n-v1|\ - tl-wr802n-v2|\ - tl-wr810n|\ - tl-wr810n-v2|\ - tl-wr840n-v2|\ - tl-wr840n-v3|\ - tl-wr841n-v1|\ - tl-wr841n-v7|\ - tl-wr841n-v8|\ - tl-wr841n-v9|\ - tl-wr841n-v11|\ - tl-wr842n-v2|\ - tl-wr842n-v3|\ - tl-wr902ac-v1|\ - tl-wr940n-v4|\ - tl-wr940n-v6|\ - tl-wr941nd|\ - tl-wr941nd-v5|\ - tl-wr941nd-v6|\ - ts-d084|\ - wifi-pineapple-nano) - local magic_ver="0100" - - case "$board" in - tl-wdr3320-v2|tl-wdr6500-v2) - magic_ver="0200" - ;; - esac - - [ "$magic" != "$magic_ver" ] && { - echo "Invalid image type." - return 1 - } - - local hwid - local mid - local imagehwid - local imagemid - - hwid=$(tplink_get_hwid) - mid=$(tplink_get_mid) - imagehwid=$(tplink_get_image_hwid "$1") - imagemid=$(tplink_get_image_mid "$1") - - [ "$hwid" != "$imagehwid" -o "$mid" != "$imagemid" ] && { - echo "Invalid image, hardware ID mismatch, hw:$hwid $mid image:$imagehwid $imagemid." - return 1 - } - - local boot_size - - boot_size=$(tplink_get_image_boot_size "$1") - [ "$boot_size" != "00000000" ] && { - echo "Invalid image, it contains a bootloader." - return 1 - } - - return 0 - ;; - bsb|\ - dir-825-b1|\ - tew-673gru) - dir825b_check_image "$1" && return 0 - ;; - rb-411|\ - rb-411u|\ - rb-433|\ - rb-433u|\ - rb-435g|\ - rb-450|\ - rb-450g|\ - rb-493|\ - rb-493g|\ - rb-750|\ - rb-750gl|\ - rb-751|\ - rb-751g|\ - rb-911g-2hpnd|\ - rb-911g-5hpnd|\ - rb-911g-5hpacd|\ - rb-912uag-2hpnd|\ - rb-912uag-5hpnd|\ - rb-921gs-5hpacd-r2|\ - rb-922uags-5hpacd|\ - rb-951g-2hnd|\ - rb-951ui-2hnd|\ - rb-2011l|\ - rb-2011il|\ - rb-2011ils|\ - rb-2011uas|\ - rb-2011uas-2hnd|\ - rb-2011uias|\ - rb-2011uias-2hnd|\ - rb-2011uias-2hnd-r2|\ - rb-sxt2n|\ - rb-sxt5n) - nand_do_platform_check routerboard $1 - return $? - ;; - c-60|\ - hiveap-121|\ - nbg6716|\ - r6100|\ - rambutan|\ - wi2a-ac200i|\ - wndr3700v4|\ - wndr4300) - nand_do_platform_check $board $1 - return $? - ;; - cpe210|\ - cpe510|\ - eap120|\ - wbs210|\ - wbs510) - tplink_pharos_check_image "$1" "7f454c46" "$(tplink_pharos_get_model_string)" '' && return 0 - return 1 - ;; - cpe210-v2|\ - cpe210-v3) - tplink_pharos_check_image "$1" "01000000" "$(tplink_pharos_v2_get_model_string)" '\0\xff\r' && return 0 - return 1 - ;; - cpe510-v2) - tplink_pharos_check_image "$1" "7f454c46" "$(tplink_pharos_v2_get_model_string)" '\0\xff\r' && return 0 - return 1 - ;; - a40|\ - a60|\ - mr1750|\ - mr1750v2|\ - mr600|\ - mr600v2|\ - mr900|\ - mr900v2|\ - om2p|\ - om2p-hs|\ - om2p-hsv2|\ - om2p-hsv3|\ - om2p-hsv4|\ - om2p-lc|\ - om2pv2|\ - om2pv4|\ - om5p|\ - om5p-ac|\ - om5p-acv2|\ - om5p-an) - platform_check_image_openmesh "$magic_long" "$1" && return 0 - return 1 - ;; - mr18|\ - z1) - merakinand_do_platform_check $board $1 - return $? - ;; - dir-869-a1|\ - mynet-n600|\ - mynet-n750|\ - qihoo-c301) - [ "$magic_long" != "5ea3a417" ] && { - echo "Invalid image, bad magic: $magic_long" - return 1 - } - - local typemagic=$(seama_get_type_magic "$1") - [ "$typemagic" != "6669726d" ] && { - echo "Invalid image, bad type: $typemagic" - return 1 - } - - return 0 - ;; - e2100l|\ - mynet-rext|\ - wrt160nl) - cybertan_check_image "$1" && return 0 - return 1 - ;; - nbg6616|\ - uap-pro|\ - unifi-outdoor-plus) - [ "$magic_long" != "19852003" ] && { - echo "Invalid image type." - return 1 - } - - return 0 - ;; - tube2h) - alfa_check_image "$1" && return 0 - return 1 - ;; - wndr3700|\ - wnr1000-v2|\ - wnr2000-v3|\ - wnr612-v2|\ - wpn824n) - local hw_magic - - hw_magic="$(ar71xx_get_mtd_part_magic firmware)" - [ "$magic_long" != "$hw_magic" ] && { - echo "Invalid image, hardware ID mismatch, hw:$hw_magic image:$magic_long." - return 1 - } - - return 0 - ;; - wnr2000-v4) - [ "$magic_long" != "32303034" ] && { - echo "Invalid image type." - return 1 - } - - return 0 - ;; - wnr2200) - [ "$magic_long" != "32323030" ] && { - echo "Invalid image type." - return 1 - } - - return 0 - ;; - dap-2695-a1) - local magic=$(wrgg_get_image_magic "$1") - [ "$magic" != "21030820" ] && { - echo "Invalid image, bad type: $magic" - return 1 - } - - return 0; - ;; - # these boards use metadata images - fritz300e|\ - fritz4020|\ - fritz450e|\ - koala|\ - rb-750-r2|\ - rb-750p-pbr2|\ - rb-750up-r2|\ - rb-911-2hn|\ - rb-911-5hn|\ - rb-931-2nd|\ - rb-941-2nd|\ - rb-951ui-2nd|\ - rb-952ui-5ac2nd|\ - rb-962uigs-5hact2hnt|\ - rb-lhg-5nd|\ - rb-map-2nd|\ - rb-mapl-2nd|\ - rb-sxt-2nd-r3|\ - rb-wap-2nd|\ - rb-wapg-5hact2hnd|\ - rb-wapr-2nd) - return 0 - ;; - esac - - echo "Sysupgrade is not yet supported on $board." - return 1 -} - -platform_do_upgrade_mikrotik_rb() { - CI_KERNPART=none - local fw_mtd=$(find_mtd_part kernel) - fw_mtd="${fw_mtd/block/}" - [ -n "$fw_mtd" ] || return - - local board_dir=$(tar tf "$1" | grep -m 1 '^sysupgrade-.*/$') - board_dir=${board_dir%/} - [ -n "$board_dir" ] || return - - mtd erase kernel - tar xf "$1" ${board_dir}/kernel -O | nandwrite -o "$fw_mtd" - - - nand_do_upgrade "$1" -} - -platform_do_upgrade_nokia() { - case "$(fw_printenv -n dualPartition)" in - imgA) - fw_setenv dualPartition imgB - fw_setenv ActImg NokiaImageB - ;; - imgB) - fw_setenv dualPartition imgA - fw_setenv ActImg NokiaImageA - ;; - esac - ubiblock -r /dev/ubiblock0_0 2>/dev/null >/dev/null - rm -f /dev/ubiblock0_0 - ubidetach -d 0 2>/dev/null >/dev/null - CI_UBIPART=ubi_alt - CI_KERNPART=kernel_alt - - nand_do_upgrade "$1" -} - -platform_do_upgrade() { - local board=$(board_name) - - case "$board" in - rb-750-r2|\ - rb-750p-pbr2|\ - rb-750up-r2|\ - rb-911-2hn|\ - rb-911-5hn|\ - rb-931-2nd|\ - rb-941-2nd|\ - rb-951ui-2nd|\ - rb-952ui-5ac2nd|\ - rb-962uigs-5hact2hnt|\ - rb-lhg-5nd|\ - rb-map-2nd|\ - rb-mapl-2nd|\ - rb-sxt-2nd-r3|\ - rb-wap-2nd|\ - rb-wapg-5hact2hnd|\ - rb-wapr-2nd) - # erase firmware if booted from initramfs - [ -z "$(rootfs_type)" ] && mtd erase firmware - ;; - esac - - case "$board" in - all0258n) - platform_do_upgrade_allnet "0x9f050000" "$1" - ;; - all0305|\ - eap7660d|\ - ja76pf|\ - ja76pf2|\ - jwap003|\ - ls-sr71|\ - pb42|\ - pb44|\ - routerstation|\ - routerstation-pro) - platform_do_upgrade_combined "$1" - ;; - all0315n) - platform_do_upgrade_allnet "0x9f080000" "$1" - ;; - cap4200ag|\ - eap300v2|\ - ens202ext) - platform_do_upgrade_allnet "0xbf0a0000" "$1" - ;; - dir-825-b1|\ - tew-673gru) - platform_do_upgrade_dir825b "$1" - ;; - a40|\ - a60|\ - mr1750|\ - mr1750v2|\ - mr600|\ - mr600v2|\ - mr900|\ - mr900v2|\ - om2p|\ - om2p-hs|\ - om2p-hsv2|\ - om2p-hsv3|\ - om2p-hsv4|\ - om2p-lc|\ - om2pv2|\ - om2pv4|\ - om5p|\ - om5p-ac|\ - om5p-acv2|\ - om5p-an) - platform_do_upgrade_openmesh "$1" - ;; - c-60|\ - hiveap-121|\ - nbg6716|\ - r6100|\ - rambutan|\ - wndr3700v4|\ - wndr4300) - nand_do_upgrade "$1" - ;; - mr18|\ - z1) - merakinand_do_upgrade "$1" - ;; - rb-411|\ - rb-411u|\ - rb-433|\ - rb-433u|\ - rb-435g|\ - rb-450|\ - rb-450g|\ - rb-493|\ - rb-493g|\ - rb-750|\ - rb-750gl|\ - rb-751|\ - rb-751g|\ - rb-911g-2hpnd|\ - rb-911g-5hpacd|\ - rb-911g-5hpnd|\ - rb-912uag-2hpnd|\ - rb-912uag-5hpnd|\ - rb-921gs-5hpacd-r2|\ - rb-922uags-5hpacd|\ - rb-951g-2hnd|\ - rb-951ui-2hnd|\ - rb-2011il|\ - rb-2011ils|\ - rb-2011l|\ - rb-2011uas|\ - rb-2011uas-2hnd|\ - rb-2011uias|\ - rb-2011uias-2hnd|\ - rb-2011uias-2hnd-r2|\ - rb-sxt2n|\ - rb-sxt5n) - platform_do_upgrade_mikrotik_rb "$1" - ;; - uap-pro|\ - unifi-outdoor-plus) - MTD_CONFIG_ARGS="-s 0x180000" - default_do_upgrade "$1" - ;; - wi2a-ac200i) - platform_do_upgrade_nokia "$1" - ;; - wp543|\ - wpe72) - platform_do_upgrade_compex "$1" - ;; - *) - default_do_upgrade "$1" - ;; - esac -} diff --git a/target/linux/ar71xx/config-4.14 b/target/linux/ar71xx/config-4.14 deleted file mode 100644 index 147be5e2d2..0000000000 --- a/target/linux/ar71xx/config-4.14 +++ /dev/null @@ -1,485 +0,0 @@ -CONFIG_AG71XX=y -CONFIG_AG71XX_AR8216_SUPPORT=y -# CONFIG_AG71XX_DEBUG is not set -# CONFIG_AG71XX_DEBUG_FS is not set -CONFIG_AR8216_PHY=y -CONFIG_AR8216_PHY_LEDS=y -CONFIG_ARCH_BINFMT_ELF_STATE=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_DISCARD_MEMBLOCK=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -# CONFIG_ARCH_HAS_SG_CHAIN is not set -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_AT803X_PHY=y -CONFIG_ATH79=y -# CONFIG_ATH79_DEV_AP9X_PCI is not set -# CONFIG_ATH79_DEV_DSA is not set -# CONFIG_ATH79_DEV_ETH is not set -# CONFIG_ATH79_DEV_GPIO_BUTTONS is not set -# CONFIG_ATH79_DEV_LEDS_GPIO is not set -# CONFIG_ATH79_DEV_M25P80 is not set -# CONFIG_ATH79_DEV_SPI is not set -# CONFIG_ATH79_DEV_USB is not set -# CONFIG_ATH79_MACH_A60 is not set -# CONFIG_ATH79_MACH_ALFA_AP120C is not set -# CONFIG_ATH79_MACH_ALFA_AP96 is not set -# CONFIG_ATH79_MACH_ALFA_NX is not set -# CONFIG_ATH79_MACH_ALL0258N is not set -# CONFIG_ATH79_MACH_ALL0315N is not set -# CONFIG_ATH79_MACH_ANTMINER_S1 is not set -# CONFIG_ATH79_MACH_ANTMINER_S3 is not set -# CONFIG_ATH79_MACH_ANTROUTER_R1 is not set -# CONFIG_ATH79_MACH_AP121 is not set -# CONFIG_ATH79_MACH_AP121F is not set -# CONFIG_ATH79_MACH_AP132 is not set -# CONFIG_ATH79_MACH_AP136 is not set -# CONFIG_ATH79_MACH_AP143 is not set -# CONFIG_ATH79_MACH_AP147 is not set -# CONFIG_ATH79_MACH_AP152 is not set -# CONFIG_ATH79_MACH_AP531B0 is not set -# CONFIG_ATH79_MACH_AP81 is not set -# CONFIG_ATH79_MACH_AP90Q is not set -# CONFIG_ATH79_MACH_AP91_5G is not set -# CONFIG_ATH79_MACH_AP96 is not set -# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set -# CONFIG_ATH79_MACH_ARCHER_C58_V1 is not set -# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set -# CONFIG_ATH79_MACH_ARCHER_C59_V2 is not set -# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set -# CONFIG_ATH79_MACH_ARCHER_C60_V2 is not set -# CONFIG_ATH79_MACH_ARCHER_C7 is not set -# CONFIG_ATH79_MACH_ARDUINO_YUN is not set -# CONFIG_ATH79_MACH_AW_NR580 is not set -# CONFIG_ATH79_MACH_BHR_4GRV2 is not set -# CONFIG_ATH79_MACH_BHU_BXU2000N2_A is not set -# CONFIG_ATH79_MACH_BSB is not set -# CONFIG_ATH79_MACH_C55 is not set -# CONFIG_ATH79_MACH_C60 is not set -# CONFIG_ATH79_MACH_CAP324 is not set -# CONFIG_ATH79_MACH_CAP4200AG is not set -# CONFIG_ATH79_MACH_CARAMBOLA2 is not set -# CONFIG_ATH79_MACH_CF_E316N_V2 is not set -# CONFIG_ATH79_MACH_CF_E320N_V2 is not set -# CONFIG_ATH79_MACH_CF_E355AC is not set -# CONFIG_ATH79_MACH_CF_E375AC is not set -# CONFIG_ATH79_MACH_CF_E380AC_V1 is not set -# CONFIG_ATH79_MACH_CF_E380AC_V2 is not set -# CONFIG_ATH79_MACH_CF_E520N is not set -# CONFIG_ATH79_MACH_CF_E530N is not set -# CONFIG_ATH79_MACH_CPE505N is not set -# CONFIG_ATH79_MACH_CPE510 is not set -# CONFIG_ATH79_MACH_CPE830 is not set -# CONFIG_ATH79_MACH_CPE870 is not set -# CONFIG_ATH79_MACH_CR3000 is not set -# CONFIG_ATH79_MACH_CR5000 is not set -# CONFIG_ATH79_MACH_DAP_1330_A1 is not set -# CONFIG_ATH79_MACH_DAP_2695_A1 is not set -# CONFIG_ATH79_MACH_DB120 is not set -# CONFIG_ATH79_MACH_DGL_5500_A1 is not set -# CONFIG_ATH79_MACH_DHP_1565_A1 is not set -# CONFIG_ATH79_MACH_DIR_505_A1 is not set -# CONFIG_ATH79_MACH_DIR_600_A1 is not set -# CONFIG_ATH79_MACH_DIR_615_C1 is not set -# CONFIG_ATH79_MACH_DIR_615_I1 is not set -# CONFIG_ATH79_MACH_DIR_825_B1 is not set -# CONFIG_ATH79_MACH_DIR_825_C1 is not set -# CONFIG_ATH79_MACH_DIR_869_A1 is not set -# CONFIG_ATH79_MACH_DLAN_HOTSPOT is not set -# CONFIG_ATH79_MACH_DLAN_PRO_1200_AC is not set -# CONFIG_ATH79_MACH_DLAN_PRO_500_WP is not set -# CONFIG_ATH79_MACH_DOMYWIFI_DW33D is not set -# CONFIG_ATH79_MACH_DR342 is not set -# CONFIG_ATH79_MACH_DR344 is not set -# CONFIG_ATH79_MACH_DR531 is not set -# CONFIG_ATH79_MACH_DRAGINO2 is not set -# CONFIG_ATH79_MACH_E1700AC_V2 is not set -# CONFIG_ATH79_MACH_E2100L is not set -# CONFIG_ATH79_MACH_E558_V2 is not set -# CONFIG_ATH79_MACH_E600G_V2 is not set -# CONFIG_ATH79_MACH_E750A_V4 is not set -# CONFIG_ATH79_MACH_E750G_V8 is not set -# CONFIG_ATH79_MACH_EAP120 is not set -# CONFIG_ATH79_MACH_EAP300V2 is not set -# CONFIG_ATH79_MACH_EAP7660D is not set -# CONFIG_ATH79_MACH_EL_M150 is not set -# CONFIG_ATH79_MACH_EL_MINI is not set -# CONFIG_ATH79_MACH_ENS202EXT is not set -# CONFIG_ATH79_MACH_EPG5000 is not set -# CONFIG_ATH79_MACH_ESR1750 is not set -# CONFIG_ATH79_MACH_ESR900 is not set -# CONFIG_ATH79_MACH_EW_BALIN is not set -# CONFIG_ATH79_MACH_EW_DORIN is not set -# CONFIG_ATH79_MACH_F9K1115V2 is not set -# CONFIG_ATH79_MACH_FRITZ300E is not set -# CONFIG_ATH79_MACH_FRITZ4020 is not set -# CONFIG_ATH79_MACH_FRITZ450E is not set -# CONFIG_ATH79_MACH_GL_AR150 is not set -# CONFIG_ATH79_MACH_GL_AR300 is not set -# CONFIG_ATH79_MACH_GL_AR300M is not set -# CONFIG_ATH79_MACH_GL_AR750 is not set -# CONFIG_ATH79_MACH_GL_AR750S is not set -# CONFIG_ATH79_MACH_GL_DOMINO is not set -# CONFIG_ATH79_MACH_GL_INET is not set -# CONFIG_ATH79_MACH_GL_MIFI is not set -# CONFIG_ATH79_MACH_GL_USB150 is not set -# CONFIG_ATH79_MACH_GS_MINIBOX_V32 is not set -# CONFIG_ATH79_MACH_GS_OOLITE_V1 is not set -# CONFIG_ATH79_MACH_GS_OOLITE_V5_2 is not set -# CONFIG_ATH79_MACH_HIVEAP_121 is not set -# CONFIG_ATH79_MACH_HIWIFI_HC6361 is not set -# CONFIG_ATH79_MACH_HORNET_UB is not set -# CONFIG_ATH79_MACH_JA76PF is not set -# CONFIG_ATH79_MACH_JWAP003 is not set -# CONFIG_ATH79_MACH_JWAP230 is not set -# CONFIG_ATH79_MACH_KOALA is not set -# CONFIG_ATH79_MACH_LAN_TURTLE is not set -# CONFIG_ATH79_MACH_LIMA is not set -# CONFIG_ATH79_MACH_MC_MAC1200R is not set -# CONFIG_ATH79_MACH_MR12 is not set -# CONFIG_ATH79_MACH_MR16 is not set -# CONFIG_ATH79_MACH_MR1750 is not set -# CONFIG_ATH79_MACH_MR18 is not set -# CONFIG_ATH79_MACH_MR600 is not set -# CONFIG_ATH79_MACH_MR900 is not set -# CONFIG_ATH79_MACH_MYNET_N600 is not set -# CONFIG_ATH79_MACH_MYNET_N750 is not set -# CONFIG_ATH79_MACH_MYNET_REXT is not set -# CONFIG_ATH79_MACH_MZK_W04NU is not set -# CONFIG_ATH79_MACH_MZK_W300NH is not set -# CONFIG_ATH79_MACH_N5Q is not set -# CONFIG_ATH79_MACH_NBG460N is not set -# CONFIG_ATH79_MACH_NBG6716 is not set -# CONFIG_ATH79_MACH_OM2P is not set -# CONFIG_ATH79_MACH_OM5P is not set -# CONFIG_ATH79_MACH_OM5P_AC is not set -# CONFIG_ATH79_MACH_OM5P_ACv2 is not set -# CONFIG_ATH79_MACH_OMY_G1 is not set -# CONFIG_ATH79_MACH_OMY_X1 is not set -# CONFIG_ATH79_MACH_ONION_OMEGA is not set -# CONFIG_ATH79_MACH_PB42 is not set -# CONFIG_ATH79_MACH_PB44 is not set -# CONFIG_ATH79_MACH_PQI_AIR_PEN is not set -# CONFIG_ATH79_MACH_QIHOO_C301 is not set -# CONFIG_ATH79_MACH_R36A is not set -# CONFIG_ATH79_MACH_R602N is not set -# CONFIG_ATH79_MACH_R6100 is not set -# CONFIG_ATH79_MACH_RAMBUTAN is not set -# CONFIG_ATH79_MACH_RB2011 is not set -# CONFIG_ATH79_MACH_RB4XX is not set -# CONFIG_ATH79_MACH_RB750 is not set -# CONFIG_ATH79_MACH_RB91X is not set -# CONFIG_ATH79_MACH_RB922 is not set -# CONFIG_ATH79_MACH_RB95X is not set -# CONFIG_ATH79_MACH_RBSPI is not set -# CONFIG_ATH79_MACH_RBSXTLITE is not set -# CONFIG_ATH79_MACH_RE355 is not set -# CONFIG_ATH79_MACH_RE450 is not set -# CONFIG_ATH79_MACH_RME_EG200 is not set -# CONFIG_ATH79_MACH_RUT9XX is not set -# CONFIG_ATH79_MACH_RW2458N is not set -# CONFIG_ATH79_MACH_SC1750 is not set -# CONFIG_ATH79_MACH_SC300M is not set -# CONFIG_ATH79_MACH_SC450 is not set -# CONFIG_ATH79_MACH_SMART_300 is not set -# CONFIG_ATH79_MACH_SOM9331 is not set -# CONFIG_ATH79_MACH_SR3200 is not set -# CONFIG_ATH79_MACH_T830 is not set -# CONFIG_ATH79_MACH_TELLSTICK_ZNET_LITE is not set -# CONFIG_ATH79_MACH_TEW_632BRP is not set -# CONFIG_ATH79_MACH_TEW_673GRU is not set -# CONFIG_ATH79_MACH_TEW_712BR is not set -# CONFIG_ATH79_MACH_TEW_732BR is not set -# CONFIG_ATH79_MACH_TEW_823DRU is not set -# CONFIG_ATH79_MACH_TL_MR11U is not set -# CONFIG_ATH79_MACH_TL_MR13U is not set -# CONFIG_ATH79_MACH_TL_MR3020 is not set -# CONFIG_ATH79_MACH_TL_MR3X20 is not set -# CONFIG_ATH79_MACH_TL_MR6400 is not set -# CONFIG_ATH79_MACH_TL_WA701ND_V2 is not set -# CONFIG_ATH79_MACH_TL_WA7210N_V2 is not set -# CONFIG_ATH79_MACH_TL_WA801ND_V3 is not set -# CONFIG_ATH79_MACH_TL_WA830RE_V2 is not set -# CONFIG_ATH79_MACH_TL_WA850RE_V2 is not set -# CONFIG_ATH79_MACH_TL_WA855RE_V1 is not set -# CONFIG_ATH79_MACH_TL_WA901ND is not set -# CONFIG_ATH79_MACH_TL_WA901ND_V2 is not set -# CONFIG_ATH79_MACH_TL_WA901ND_V4 is not set -# CONFIG_ATH79_MACH_TL_WAX50RE is not set -# CONFIG_ATH79_MACH_TL_WDR3320_V2 is not set -# CONFIG_ATH79_MACH_TL_WDR3500 is not set -# CONFIG_ATH79_MACH_TL_WDR4300 is not set -# CONFIG_ATH79_MACH_TL_WDR6500_V2 is not set -# CONFIG_ATH79_MACH_TL_WPA8630 is not set -# CONFIG_ATH79_MACH_TL_WR1041N_V2 is not set -# CONFIG_ATH79_MACH_TL_WR1043ND is not set -# CONFIG_ATH79_MACH_TL_WR1043ND_V2 is not set -# CONFIG_ATH79_MACH_TL_WR1043ND_V4 is not set -# CONFIG_ATH79_MACH_TL_WR1043N_V5 is not set -# CONFIG_ATH79_MACH_TL_WR2543N is not set -# CONFIG_ATH79_MACH_TL_WR703N is not set -# CONFIG_ATH79_MACH_TL_WR720N_V3 is not set -# CONFIG_ATH79_MACH_TL_WR741ND is not set -# CONFIG_ATH79_MACH_TL_WR741ND_V4 is not set -# CONFIG_ATH79_MACH_TL_WR802N_V1 is not set -# CONFIG_ATH79_MACH_TL_WR802N_V2 is not set -# CONFIG_ATH79_MACH_TL_WR810N is not set -# CONFIG_ATH79_MACH_TL_WR810N_V2 is not set -# CONFIG_ATH79_MACH_TL_WR840N_V2 is not set -# CONFIG_ATH79_MACH_TL_WR841N_V1 is not set -# CONFIG_ATH79_MACH_TL_WR841N_V8 is not set -# CONFIG_ATH79_MACH_TL_WR841N_V9 is not set -# CONFIG_ATH79_MACH_TL_WR902AC_V1 is not set -# CONFIG_ATH79_MACH_TL_WR940N_V4 is not set -# CONFIG_ATH79_MACH_TL_WR941ND is not set -# CONFIG_ATH79_MACH_TL_WR941ND_V6 is not set -# CONFIG_ATH79_MACH_TL_WR942N_V1 is not set -# CONFIG_ATH79_MACH_TS_D084 is not set -# CONFIG_ATH79_MACH_TUBE2H is not set -# CONFIG_ATH79_MACH_UBNT is not set -# CONFIG_ATH79_MACH_UBNT_UNIFIAC is not set -# CONFIG_ATH79_MACH_UBNT_XM is not set -# CONFIG_ATH79_MACH_WAM250 is not set -# CONFIG_ATH79_MACH_WEIO is not set -# CONFIG_ATH79_MACH_WHR_HP_G300N is not set -# CONFIG_ATH79_MACH_WI2A_AC200I is not set -# CONFIG_ATH79_MACH_WIFI_PINEAPPLE_NANO is not set -# CONFIG_ATH79_MACH_WLAE_AG300N is not set -# CONFIG_ATH79_MACH_WLR8100 is not set -# CONFIG_ATH79_MACH_WNDAP360 is not set -# CONFIG_ATH79_MACH_WNDR3700 is not set -# CONFIG_ATH79_MACH_WNDR4300 is not set -# CONFIG_ATH79_MACH_WNR2000 is not set -# CONFIG_ATH79_MACH_WNR2000_V3 is not set -# CONFIG_ATH79_MACH_WNR2000_V4 is not set -# CONFIG_ATH79_MACH_WNR2200 is not set -# CONFIG_ATH79_MACH_WP543 is not set -# CONFIG_ATH79_MACH_WPE72 is not set -# CONFIG_ATH79_MACH_WPJ342 is not set -# CONFIG_ATH79_MACH_WPJ344 is not set -# CONFIG_ATH79_MACH_WPJ531 is not set -# CONFIG_ATH79_MACH_WPJ558 is not set -# CONFIG_ATH79_MACH_WPJ563 is not set -# CONFIG_ATH79_MACH_WRT160NL is not set -# CONFIG_ATH79_MACH_WRT400N is not set -# CONFIG_ATH79_MACH_WRTNODE2Q is not set -# CONFIG_ATH79_MACH_WZR_450HP2 is not set -# CONFIG_ATH79_MACH_WZR_HP_AG300H is not set -# CONFIG_ATH79_MACH_WZR_HP_G300NH is not set -# CONFIG_ATH79_MACH_WZR_HP_G300NH2 is not set -# CONFIG_ATH79_MACH_WZR_HP_G450H is not set -# CONFIG_ATH79_MACH_XD3200 is not set -# CONFIG_ATH79_MACH_Z1 is not set -# CONFIG_ATH79_MACH_ZBT_WE1526 is not set -# CONFIG_ATH79_MACH_ZCN_1523H is not set -# CONFIG_ATH79_NVRAM is not set -# CONFIG_ATH79_PCI_ATH9K_FIXUP is not set -# CONFIG_ATH79_ROUTERBOOT is not set -CONFIG_ATH79_WDT=y -CONFIG_CEVT_R4K=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="rootfstype=squashfs noinitrd" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -# CONFIG_COMMON_CLK_BOSTON is not set -CONFIG_COMMON_CLK=y -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_RIXI=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_R4K_FPU=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CPU_SUPPORTS_MSA=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_CSRC_R4K=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_ETHERNET_PACKET_MANGLE=y -CONFIG_FIXED_PHY=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_74X164=y -CONFIG_GPIO_ATH79=y -CONFIG_GPIO_GENERIC=y -# CONFIG_GPIO_LATCH is not set -CONFIG_GPIO_NXP_74HC153=y -CONFIG_GPIO_PCF857X=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -# CONFIG_HAVE_ARCH_BITREVERSE is not set -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_CBPF_JIT=y -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DEBUG_STACKOVERFLOW=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KVM=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HZ_PERIODIC=y -CONFIG_I2C=y -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_GPIO=y -CONFIG_IMAGE_CMDLINE_HACK=y -CONFIG_INITRAMFS_ROOT_GID=0 -CONFIG_INITRAMFS_ROOT_UID=0 -CONFIG_INITRAMFS_SOURCE="../../root" -CONFIG_INTEL_XWAY_PHY=y -CONFIG_IP17XX_PHY=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_MIPS_CPU=y -CONFIG_IRQ_WORK=y -CONFIG_LEDS_GPIO=y -CONFIG_MARVELL_PHY=y -CONFIG_MDIO_BITBANG=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MDIO_GPIO=y -CONFIG_MICREL_PHY=y -CONFIG_MIPS=y -CONFIG_MIPS_ASID_BITS=8 -CONFIG_MIPS_ASID_SHIFT=0 -CONFIG_MIPS_CLOCK_VSYSCALL=y -# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set -CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y -# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_MACHINE=y -CONFIG_MIPS_SPRAM=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CYBERTAN_PARTS=y -CONFIG_MTD_M25P80=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -CONFIG_MTD_MYLOADER_PARTS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2 -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_EVA_FW=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_LZMA_FW=y -CONFIG_MTD_SPLIT_MINOR_FW=y -CONFIG_MTD_SPLIT_SEAMA_FW=y -CONFIG_MTD_SPLIT_TPLINK_FW=y -CONFIG_MTD_SPLIT_UIMAGE_FW=y -CONFIG_MTD_SPLIT_WRGG_FW=y -CONFIG_MTD_TPLINK_PARTS=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6060=y -CONFIG_NET_DSA_MV88E6063=y -CONFIG_NET_DSA_TAG_TRAILER=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -# CONFIG_NO_IOPORT_MAP is not set -# CONFIG_OF is not set -# CONFIG_PCI_AR724X is not set -CONFIG_PCI_DRIVERS_LEGACY=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_RATIONAL=y -# CONFIG_RCU_STALL_COMMON is not set -CONFIG_RTL8306_PHY=y -CONFIG_RTL8366RB_PHY=y -CONFIG_RTL8366S_PHY=y -CONFIG_RTL8366_SMI=y -CONFIG_RTL8367_PHY=y -# CONFIG_SCHED_INFO is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250_FSL is not set -CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_8250_RUNTIME_UARTS=1 -# CONFIG_SOC_AR71XX is not set -# CONFIG_SOC_AR724X is not set -# CONFIG_SOC_AR913X is not set -# CONFIG_SOC_AR933X is not set -# CONFIG_SOC_AR934X is not set -# CONFIG_SOC_QCA953X is not set -# CONFIG_SOC_QCA955X is not set -# CONFIG_SOC_QCA956X is not set -CONFIG_SPI=y -CONFIG_SPI_ATH79=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -# CONFIG_SPI_RB4XX is not set -# CONFIG_SPI_VSC7385 is not set -CONFIG_SRCU=y -CONFIG_SWCONFIG=y -CONFIG_SWCONFIG_LEDS=y -CONFIG_SWPHY=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_MIPS16=y -CONFIG_SYS_SUPPORTS_ZBOOT=y -CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_USB_SUPPORT=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt deleted file mode 100644 index 6fd78c46a0..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ /dev/null @@ -1,2458 +0,0 @@ -config ATH79_MACH_A60 - bool "OpenMesh A40/A60 board support" - select SOC_QCA955X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - select ATH79_DEV_USB - -config ATH79_MACH_WI2A_AC200I - bool "Nokia WI2A-AC200i support" - select SOC_QCA955X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_NFC - select ATH79_DEV_WMAC - select ATH79_DEV_USB - -config ATH79_MACH_ALFA_AP120C - bool "ALFA Network AP120C board support" - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_AP121F - bool "ALFA Network AP121F support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_ALFA_AP96 - bool "ALFA Network AP96 board support" - select SOC_AR71XX - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - -config ATH79_MACH_HORNET_UB - bool "ALFA Network Hornet-UB board support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_ALFA_NX - bool "ALFA Network N2/N5 board support" - select SOC_AR724X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -config ATH79_MACH_TUBE2H - bool "ALFA Network Tube2H board support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_SC1750 - bool "Abicom SC1750 board support" - select SOC_QCA955X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_SC300M - bool "Abicom SC300M board support" - select SOC_QCA955X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_SC450 - bool "Abicom SC450 board support" - select SOC_QCA955X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_ALL0258N - bool "Allnet ALL0258N support" - select SOC_AR724X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -config ATH79_MACH_ALL0315N - bool "Allnet ALL0315N support" - select SOC_AR724X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -config ATH79_MACH_ANTMINER_S1 - bool "Bitmain Antminer S1 support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_ANTMINER_S3 - bool "Bitmain Antminer S3 support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_ANTROUTER_R1 - bool "Bitmain Antrouter R1 support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_ARDUINO_YUN - bool "Arduino Yun" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_AP132 - bool "Atheros AP132 reference board" - select SOC_QCA955X - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_AP143 - bool "Atheros AP143 reference board" - select SOC_QCA953X - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_SPI - select ATH79_DEV_USB - select ATH79_DEV_WMAC - select ATH79_DEV_ETH - select ATH79_DEV_M25P80 - -config ATH79_MACH_AP147 - bool "Atheros AP147 reference board" - select SOC_QCA953X - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - select ATH79_DEV_AP9X_PCI if PCI - -config ATH79_MACH_AP152 - bool "Atheros AP152 reference board" - select SOC_QCA956X - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - select ATH79_DEV_AP9X_PCI if PCI - -config ATH79_MACH_AP531B0 - bool "Rockeetech AP531B0 support" - select SOC_QCA953X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_SPI - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_AP90Q - bool "YunCore AP80Q/AP90Q support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_AP91_5G - bool "ALFA Network AP91-5G support" - select SOC_AR724X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -config ATH79_MACH_AP96 - bool "Atheros AP96 board support" - select SOC_AR71XX - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - -config ATH79_MACH_PB42 - bool "Atheros PB42 board support" - select SOC_AR71XX - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_M25P80 - -config ATH79_MACH_C55 - bool "AirTight Networks C-55 support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_C60 - bool "AirTight Networks C-60 support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - select ATH79_DEV_NFC - select ATH79_DEV_USB - -config ATH79_MACH_AW_NR580 - bool "AzureWave AW-NR580 board support" - select SOC_AR71XX - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -config ATH79_MACH_F9K1115V2 - bool "Belkin AC1750DB board support" - select SOC_QCA955X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_EPG5000 - bool "EnGenius EPG5000 board support" - select SOC_QCA955X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - select ATH79_NVRAM - -config ATH79_MACH_ESR1750 - bool "EnGenius ESR1750 board support" - select SOC_QCA955X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - select ATH79_NVRAM - -config ATH79_MACH_PQI_AIR_PEN - bool "PQI Air Pen" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_SOM9331 - bool "SOM9331 support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_SR3200 - bool "YunCore SR3200 support" - select SOC_QCA956X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_BHR_4GRV2 - bool "Buffalo BHR-4GRV2 board support" - select SOC_QCA955X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -config ATH79_MACH_WHR_HP_G300N - bool "Buffalo WHR-HP-G300N board support" - select SOC_AR724X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -config ATH79_MACH_WLAE_AG300N - bool "Buffalo WLAE-AG300N board support" - select SOC_AR71XX - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -config ATH79_MACH_WLR8100 - bool "Sitecom WLR-8100 board support" - select SOC_QCA955X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_WZR_HP_AG300H - bool "Buffalo WZR-HP-AG300H board support" - select SOC_AR71XX - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - -config ATH79_MACH_WZR_HP_G300NH - bool "Buffalo WZR-HP-G300NH board support" - select SOC_AR913X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_USB - select ATH79_DEV_WMAC - select RTL8366_SMI - -config ATH79_MACH_WZR_HP_G300NH2 - bool "Buffalo WZR-HP-G300NH2 board support" - select SOC_AR724X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - -config ATH79_MACH_WZR_HP_G450H - bool "Buffalo WZR-HP-G450H board support" - select SOC_AR724X - select ATH79_DEV_ETH - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - -config ATH79_MACH_WZR_450HP2 - bool "Buffalo WZR-450HP2 board support" - select SOC_QCA955X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_WP543 - bool "Compex WP543/WPJ543 board support" - select SOC_AR71XX - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select MYLOADER - -config ATH79_MACH_WPE72 - bool "Compex WPE72/WPE72NX board support" - select SOC_AR724X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select MYLOADER - -config ATH79_MACH_WPJ342 - bool "Compex WPJ342 board support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_WPJ344 - bool "Compex WPJ344 board support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_WPJ531 - bool "Compex WPJ531 board support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_WPJ558 - bool "Compex WPJ558 board support" - select SOC_QCA955X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_WPJ563 - bool "Compex WPJ563 board support" - select SOC_QCA956X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_XD3200 - bool "YunCore XD3200 support" - select SOC_QCA956X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_DGL_5500_A1 - bool "D-Link DGL-5500 A1 support" - select SOC_QCA955X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - select ATH79_DEV_USB - -config ATH79_MACH_DHP_1565_A1 - bool "D-Link DHP-1565 rev. A1 board support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_DIR_505_A1 - bool "D-Link DIR-505-A1 support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_DIR_600_A1 - bool "D-Link DIR-600 A1/DIR-615 E1/DIR-615 E4 support" - select SOC_AR724X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_NVRAM - -config ATH79_MACH_DIR_615_C1 - bool "D-Link DIR-615 rev. C1 support" - select SOC_AR913X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - select ATH79_NVRAM - -config ATH79_MACH_DIR_615_I1 - bool "D-Link DIR-615 rev. I1 support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_DIR_825_B1 - bool "D-Link DIR-825 rev. B1 board support" - select SOC_AR71XX - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - -config ATH79_MACH_DIR_825_C1 - bool "D-Link DIR-825 rev. C1/DIR-835 rev. A1 board support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_DIR_869_A1 - bool "D-Link DIR-869 rev. A1" - select SOC_QCA956X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - select ATH79_NVRAM - -config ATH79_MACH_DLAN_HOTSPOT - bool "devolo dLAN Hotspot support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_DLAN_PRO_500_WP - bool "devolo dLAN pro 500 Wireless+ support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_SPI - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - select ATH79_DEV_USB - -config ATH79_MACH_DLAN_PRO_1200_AC - bool "devolo dLAN pro 1200+ WiFi ac support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_SPI - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - select ATH79_DEV_NFC - select ATH79_DEV_USB - -config ATH79_MACH_DOMYWIFI_DW33D - bool "DomyWifi DW33D support" - select SOC_QCA955X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_NFC - select ATH79_DEV_WMAC - select ATH79_DEV_USB - -config ATH79_MACH_DR342 - bool "Wallys DR342 board support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_DR344 - bool "Wallys DR344 board support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_DR531 - bool "Wallys DR531 board support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_DRAGINO2 - bool "DRAGINO V2 support" - select SOC_AR933X - select ATH79_DEV_M25P80 - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_WMAC - select ATH79_DEV_ETH - select ATH79_DEV_USB - -config ATH79_MACH_E1700AC_V2 - bool "Qxwlan E1700AC v2 support" - select SOC_QCA956X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_E2100L - bool "Linksys E2100L board support" - select SOC_AR913X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - select ATH79_NVRAM - -config ATH79_MACH_E558_V2 - bool "Qxwlan E558 v2 support" - select SOC_QCA955X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_E600G_V2 - bool "Qxwlan E600G/E600GAC v2 support" - select SOC_QCA953X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_E750A_V4 - bool "Qxwlan E750A v4 support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_E750G_V8 - bool "Qxwlan E750G v8 support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_ESR900 - bool "EnGenius ESR900 board support" - select SOC_QCA955X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - select ATH79_NVRAM - -config ATH79_MACH_EW_BALIN - bool "embedded wireless Balin Platform support" - select SOC_AR934X - select ATH79_DEV_M25P80 - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_WMAC - select ATH79_DEV_ETH - select ATH79_DEV_USB - select ATH79_DEV_AP9X_PCI if PCI - -config ATH79_MACH_EW_DORIN - bool "embedded wireless Dorin Platform support" - select SOC_AR933X - select ATH79_DEV_M25P80 - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_WMAC - select ATH79_DEV_ETH - -config ATH79_MACH_EL_M150 - bool "EasyLink EL-M150 support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_EL_MINI - bool "EasyLink EL-MINI support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_GL_AR150 - bool "GL AR150 support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_GL_AR300 - bool "GL_AR300 support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_GL_AR300M - bool "GL_AR300M support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_GL_AR750 - bool "GL.iNet GL-AR750 support" - select SOC_QCA953X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_GL_AR750S - bool "GL.iNet GL-AR750S support" - select SOC_QCA956X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_GL_DOMINO - bool "DOMINO support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_GL_MIFI - bool "GL MIFI support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_GL_INET - bool "GL-INET support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_GL_USB150 - bool "GL.iNet GL-USB150 support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_EAP120 - bool "TP-LINK EAP120 support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_ENS202EXT - bool "EnGenius ENS202EXT support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_EAP300V2 - bool "EnGenius EAP300 v2 support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_GS_MINIBOX_V32 - bool "Gainstrong Minibox V3.2 support" - select SOC_QCA953X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_SPI - select ATH79_DEV_USB - select ATH79_DEV_WMAC - select ATH79_DEV_ETH - select ATH79_DEV_M25P80 - -config ATH79_MACH_GS_OOLITE_V1 - bool "GainStrong Oolite/Minibox V1.0 support" - select SOC_AR933X - select ARH79_DEV_ETH - select ARH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_GS_OOLITE_V5_2 - bool "GainStrong Oolite V5.2 support" - select SOC_QCA953X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_HIVEAP_121 - bool "Aerohive HiveAP-121 support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_NFC - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_HIWIFI_HC6361 - bool "HiWiFi HC6361 board support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_JA76PF - bool "jjPlus JA76PF board support" - select SOC_AR71XX - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - -config ATH79_MACH_JWAP003 - bool "jjPlus JWAP003 board support" - select SOC_AR71XX - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - -config ATH79_MACH_JWAP230 - bool "jjPlus JWAP230 board support" - select SOC_QCA955X - select ATH79_DEV_ETH - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_KOALA - bool "OCEDO Koala board support" - select SOC_QCA955X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_ETH - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_WAM250 - bool "Samsung WAM250 support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_WIFI_PINEAPPLE_NANO - bool "Hak5 WiFi Pineapple NANO support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_WRT160NL - bool "Linksys WRT160NL board support" - select SOC_AR913X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - select ATH79_NVRAM - -config ATH79_MACH_WRT400N - bool "Linksys WRT400N board support" - select SOC_AR71XX - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -config ATH79_MACH_WRTNODE2Q - bool "WRTnode2Q board support" - select SOC_QCA953X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_R36A - bool "ALFA Network R36A support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_R602N - bool "P&W R602N support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_R6100 - bool "NETGEAR R6100 board support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_NFC - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_MC_MAC1200R - bool "MERCURY MAC1200R board support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_RB4XX - bool "MikroTik RouterBOARD 4xx series support" - select SOC_AR71XX - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_USB - -config ATH79_MACH_RB750 - bool "MikroTik RouterBOARD 750 support" - select SOC_AR724X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_USB - select ATH79_ROUTERBOOT - -config ATH79_MACH_RB91X - bool "MikroTik RouterBOARD 91X support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_SPI - select ATH79_DEV_WMAC - select ATH79_DEV_USB - select ATH79_ROUTERBOOT - -config ATH79_MACH_RB922 - bool "MikroTik RouterBOARD 922 support" - select SOC_QCA955X - select ATH79_DEV_ETH - select ATH79_DEV_M25P80 - select ATH79_DEV_NFC - select ATH79_DEV_USB - select ATH79_ROUTERBOOT - select RLE_DECOMPRESS - -config ATH79_MACH_RB95X - bool "MikroTik RouterBOARD 95X support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_NFC - select ATH79_DEV_WMAC - select ATH79_DEV_USB - select ATH79_ROUTERBOOT - -config ATH79_MACH_RB2011 - bool "MikroTik RouterBOARD 2011 support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_M25P80 - select ATH79_DEV_NFC - select ATH79_DEV_USB - select ATH79_DEV_WMAC - select ATH79_ROUTERBOOT - -config ATH79_MACH_RBSPI - bool "MikroTik RouterBOARD SPI-NOR support" - select SOC_AR934X - select SOC_QCA953X - select SOC_QCA955X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - select ATH79_ROUTERBOOT - help - Say 'Y' here if you want your kernel to support the - MikroTik ROuterBOARD 911-2Hn (911 Lite2) - MikroTik ROuterBOARD 911-5Hn (911 Lite5) - MikroTik RouterBOARD mAP - MikroTik RouterBOARD mAP lite - MikroTik RouterBOARD hAP mini - MikroTik RouterBOARD hAP lite - MikroTik RouterBOARD hAP - MikroTik RouterBOARD hAP ac - MikroTik RouterBOARD hAP ac lite - MikroTik RouterBOARD hEX PoE lite - MikroTik RouterBOARD hEX lite - MikroTik RouterBOARD Powerbox - MikroTik RouterBOARD LHG 5 - MikroTik RouterBOARD cAP (EXPERIMENTAL) - MikroTik RouterBOARD SXT Lite 2 r3 - MikroTik RouterBOARD wAP - MikroTik RouterBOARD wAP R-2nD - -config ATH79_MACH_RBSXTLITE - bool "MikroTik RouterBOARD SXT Lite" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_NFC - select ATH79_DEV_WMAC - select ATH79_ROUTERBOOT - -config ATH79_MACH_SMART_300 - bool "NC-LINK SMART-300 board support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_T830 - bool "YunCore T830 support" - select SOC_QCA953X - select ARH79_DEV_ETH - select ARH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TELLSTICK_ZNET_LITE - bool "TellStick ZNet Lite" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_WNDAP360 - bool "NETGEAR WNDAP360 board support" - select SOC_AR71XX - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -config ATH79_MACH_WNDR3700 - bool "NETGEAR WNDR3700 board support" - select SOC_AR71XX - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - -config ATH79_MACH_WNDR4300 - bool "NETGEAR WNDR3700v4/WNDR4300 board support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_NFC - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_WNR2000 - bool "NETGEAR WNR2000 board support" - select SOC_AR913X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_WNR2000_V3 - bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2/WPN824N board support" - select SOC_AR724X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -config ATH79_MACH_WNR2200 - bool "NETGEAR WNR2200 board support" - select SOC_AR724X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - -config ATH79_MACH_WNR2000_V4 - bool "NETGEAR WNR2000 V4" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_OM2P - bool "OpenMesh OM2P board support" - select SOC_AR724X - select SOC_AR933X - select SOC_QCA953X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_OM5P - bool "OpenMesh OM5P board support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_OM5P_AC - bool "OpenMesh OM5P-AC board support" - select SOC_QCA955X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_OM5P_ACv2 - bool "OpenMesh OM5P-ACv2 board support" - select SOC_QCA955X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_OMY_G1 - bool "OMYlink OMY G1 support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_OMY_X1 - bool "OMYlink OMY X1 support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_ONION_OMEGA - bool "ONION OMEGA support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_MR12 - bool "Meraki MR12 board support" - select SOC_AR724X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_MR16 - bool "Meraki MR16 board support" - select SOC_AR71XX - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_MR18 - bool "Meraki MR18 board support" - select SOC_QCA955X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_NFC - select ATH79_DEV_WMAC - select LEDS_NU801 - -config ATH79_MACH_MR600 - bool "OpenMesh MR600 board support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_MZK_W04NU - bool "Planex MZK-W04NU board support" - select SOC_AR913X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_MZK_W300NH - bool "Planex MZK-W300NH board support" - select SOC_AR913X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_RE355 - bool "TP-LINK RE355 board support" - select SOC_QCA955X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_RE450 - bool "TP-LINK RE450 board support" - select SOC_QCA955X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_RME_EG200 - bool "eTactica EG200 board supprt" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_RUT9XX - bool "Teltonika RUT900 series support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - select GPIO_PCA953X - -config ATH79_MACH_RW2458N - bool "Redwave RW2458N board support" - select SOC_AR724X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - -config ATH79_MACH_CAP324 - bool "PowerCloud Systems CAP324 support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_CAP4200AG - bool "Senao CAP4200AG support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_CR3000 - bool "PowerCloud Systems CR3000 support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_CR5000 - bool "PowerCloud CR5000 support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_MR1750 - bool "OpenMesh MR1750 board support" - select SOC_QCA955X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_MR900 - bool "OpenMesh MR900 board support" - select SOC_QCA955X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_EAP7660D - bool "Senao EAP7660D support" - select SOC_AR71XX - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -config ATH79_MACH_BSB - bool "Smart Electronics Black Swift board" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_ARCHER_C25_V1 - bool "TP-LINK Archer C25 v1 support" - select SOC_QCA956X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_ARCHER_C58_V1 - bool "TP-LINK Archer C58 v1 support" - select SOC_QCA956X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_ARCHER_C59_V1 - bool "TP-LINK Archer C59 v1 support" - select SOC_QCA956X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_ARCHER_C59_V2 - bool "TP-LINK Archer C59 v2 support" - select SOC_QCA956X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_ARCHER_C60_V1 - bool "TP-LINK Archer C60 v1 support" - select SOC_QCA956X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_ARCHER_C60_V2 - bool "TP-LINK Archer C60 v2 support" - select SOC_QCA956X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_ARCHER_C7 - bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support" - select SOC_QCA955X - select SOC_QCA956X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_CPE505N - bool "P&W CPE505N support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_CPE510 - bool "TP-LINK CPE510 support" - select SOC_AR934X - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_CPE830 - bool "YunCore CPE830 support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_CPE870 - bool "YunCore CPE870 support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_MR11U - bool "TP-LINK TL-MR11U/TL-MR3040 support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_MR13U - bool "TP-LINK TL-MR13U support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_MR3020 - bool "TP-LINK TL-MR3020 support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_MR3X20 - bool "TP-LINK TL-MR3220/3420 support" - select SOC_AR724X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - -config ATH79_MACH_TL_MR6400 - bool "TP-LINK TL-MR6400 support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WAX50RE - bool "TP-LINK TL-WA750/850RE support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WA701ND_V2 - bool "TP-LINK TL-WA701ND v2 support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WA7210N_V2 - bool "TP-LINK TL-WA7210N v2 support" - select SOC_AR724X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WA801ND_V3 - bool "TP-LINK TL-WA801ND v3 support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WA830RE_V2 - bool "TP-LINK TL-WA830RE v2 support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WA850RE_V2 - bool "TP-LINK TL-WA850RE v2 support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WA855RE_V1 - bool "TP-LINK TL-WA855RE V1 support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WA901ND - bool "TP-LINK TL-WA901ND/TL-WA7510N support" - select SOC_AR724X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -config ATH79_MACH_TL_WA901ND_V2 - bool "TP-LINK TL-WA901ND v2 support" - select SOC_AR913X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WA901ND_V4 - bool "TP-LINK TL-WA901ND v4 support" - select SOC_QCA956X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WDR3320_V2 - bool "TP-LINK TL-WDR3320 v2 board support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WDR3500 - bool "TP-LINK TL-WDR3500 board support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WDR4300 - bool "TP-LINK TL-WDR3600/4300/4310 board support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WDR6500_V2 - bool "TP-LINK TL-WDR6500 v2 board support" - select SOC_QCA956X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WR703N - bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WR720N_V3 - bool "TP-LINK TL-WR720N v3/v4 support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WR741ND - bool "TP-LINK TL-WR741ND support" - select SOC_AR724X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -config ATH79_MACH_TL_WR741ND_V4 - bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WR802N_V1 - bool "TP-LINK TL-WR802N v1 support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -config ATH79_MACH_TL_WR802N_V2 - bool "TP-LINK TL-WR802N v2 support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -config ATH79_MACH_TL_WR810N - bool "TP-LINK TL-WR810N support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WR810N_V2 - bool "TP-LINK TL-WR810N v2 support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WR840N_V2 - bool "TP-LINK TL-WR840N v2/v3 support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WR841N_V1 - bool "TP-LINK TL-WR841N v1 support" - select SOC_AR71XX - select ATH79_DEV_DSA - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -config ATH79_MACH_TL_WR841N_V8 - bool "TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WR841N_V9 - bool "TP-LINK TL-WR841N/ND v9/TL-WR842N/ND v3/TL-WR740N/ND v6 support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WR902AC_V1 - bool "TP-LINK TL-WR902AC v1 support" - select SOC_QCA953X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WR941ND - bool "TP-LINK TL-WR941ND support" - select SOC_AR913X - select ATH79_DEV_DSA - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WR941ND_V6 - bool "TP-LINK TL-WR941ND v6 support" - select SOC_QCA956X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WR940N_V4 - bool "TP-LINK TL-WR940N v4 support" - select SOC_QCA956X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WR942N_V1 - bool "TP-LINK TL-WR942N v1 support" - select SOC_QCA956X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - select ATH79_NVRAM - -config ATH79_MACH_TL_WR1041N_V2 - bool "TP-LINK TL-WR1041N v2 support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WR1043N_V5 - bool "TP-LINK TL-WR1043N v5 support" - select SOC_QCA956X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WR1043ND - bool "TP-LINK TL-WR1043ND support" - select SOC_AR913X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WR1043ND_V2 - bool "TP-LINK TL-WR1043ND v2 support" - select SOC_QCA955X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WR1043ND_V4 - bool "TP-LINK TL-WR1043ND v4 support" - select SOC_QCA956X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TL_WR2543N - bool "TP-LINK TL-WR2543N/ND support" - select SOC_AR724X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - -config ATH79_MACH_TS_D084 - bool "PISEN TS-D084 support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_TEW_632BRP - bool "TRENDnet TEW-632BRP support" - select SOC_AR913X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - select ATH79_NVRAM - -config ATH79_MACH_TEW_673GRU - bool "TRENDnet TEW-673GRU support" - select SOC_AR71XX - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - -config ATH79_MACH_TEW_712BR - bool "TRENDnet TEW-712BR support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_TEW_732BR - bool "TRENDnet TEW-732BR support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_TEW_823DRU - bool "TRENDnet TEW-823DRU support" - select SOC_QCA955X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_UBNT - bool "Ubiquiti AR71xx based boards support" - select SOC_AR71XX - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - -config ATH79_MACH_UBNT_UNIFIAC - bool "Ubiquiti UniFi AC (LITE/LR/MESH/PRO/MESH-PRO) support" - select SOC_QCA956X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - select ATH79_DEV_USB - -config ATH79_MACH_WEIO - bool "WeIO board" - select SOC_AR933X - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_MYNET_N600 - bool "WD My Net N600 board support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - select ATH79_NVRAM - -config ATH79_MACH_MYNET_N750 - bool "WD My Net N750 board support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - select ATH79_NVRAM - -config ATH79_MACH_MYNET_REXT - bool "WD My Net Wi-Fi Range Extender board support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - select ATH79_NVRAM - -config ATH79_MACH_Z1 - bool "Meraki Z1 board support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_NFC - select ATH79_DEV_USB - select ATH79_DEV_WMAC - select LEDS_NU801 - -config ATH79_MACH_ZBT_WE1526 - bool "Zbtlink ZBT-WE1526 board support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_ZCN_1523H - bool "Zcomax ZCN-1523H support" - select SOC_AR724X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -config ATH79_MACH_N5Q - bool "ALFA Network N5Q support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_WMAC - -config ATH79_MACH_NBG460N - bool "Zyxel NBG460N/550N/550NH board support" - select SOC_AR913X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_NBG6716 - bool "Zyxel NBG6616/NBG6716 board support" - select SOC_QCA955X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_NFC - select ATH79_DEV_USB - select ATH79_DEV_WMAC - select ATH79_NVRAM - -config ATH79_MACH_CARAMBOLA2 - bool "8devices Carambola2 board" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_LAN_TURTLE - bool "Hak5 LAN Turtle and Packet Squirrel support" - select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - -config ATH79_MACH_LIMA - bool "8devices Lima board" - select SOC_QCA953X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_M25P80 - select ATH79_DEV_SPI - select ATH79_DEV_USB - select ATH79_DEV_WMAC - select ATH79_DEV_ETH - -config ATH79_MACH_RAMBUTAN - bool "8devices Rambutan board" - select SOC_QCA955X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_NFC - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_CF_E316N_V2 - bool "COMFAST CF-E316N v2 support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_CF_E320N_V2 - bool "COMFAST CF-E320N v2 support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_CF_E355AC - bool "COMFAST CF-E355AC v1/v2 support" - select SOC_QCA953X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_CF_E375AC - bool "COMFAST CF-E375AC support" - select SOC_QCA956X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_CF_E380AC_V1 - bool "COMFAST CF-E380AC v1 support" - select SOC_QCA955X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_CF_E380AC_V2 - bool "COMFAST CF-E380AC v2 support" - select SOC_QCA955X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_CF_E520N - bool "COMFAST CF-E520N support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_CF_E530N - bool "COMFAST CF-E530N support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_BHU_BXU2000N2_A - bool "BHU BXU2000n-2 rev. A support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -config ATH79_MACH_QIHOO_C301 - bool "Qihoo 360 C301 board support" - select SOC_AR934X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - select ATH79_DEV_USB - select ATH79_NVRAM - -config ATH79_MACH_DAP_1330_A1 - bool "D-Link DAP-1330 rev. A1 support" - select SOC_QCA953X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_DAP_2695_A1 - bool "D-Link DAP-2695 rev. A1 support" - select SOC_QCA955X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - select ATH79_NVRAM - -config ATH79_MACH_TL_WPA8630 - bool "TP-Link TL-WPA8630 support" - select SOC_QCA956X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -config ATH79_MACH_FRITZ300E - bool "AVM FRITZ!WLAN Repeater 300E support" - select SOC_AR724X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -config ATH79_MACH_FRITZ4020 - bool "AVM FRITZ!Box 4020 support" - select SOC_QCA956X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_USB - select ATH79_DEV_M25P80 - -config ATH79_MACH_FRITZ450E - bool "AVM FRITZ!WLAN Repeater 450E support" - select SOC_QCA955X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile deleted file mode 100644 index 0265b3d818..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ /dev/null @@ -1,290 +0,0 @@ -# -# Makefile for the Atheros AR71XX/AR724X/AR913X specific parts of the kernel -# -# Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> -# Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -# -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License version 2 as published -# by the Free Software Foundation. - -obj-y := prom.o setup.o irq.o common.o clock.o gpio.o - -obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_PCI) += pci.o - -# -# Devices -# -obj-y += dev-common.o -obj-$(CONFIG_ATH79_DEV_AP9X_PCI) += dev-ap9x-pci.o -obj-$(CONFIG_ATH79_DEV_DSA) += dev-dsa.o -obj-$(CONFIG_ATH79_DEV_ETH) += dev-eth.o -obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o -obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o -obj-$(CONFIG_ATH79_DEV_M25P80) += dev-m25p80.o -obj-$(CONFIG_ATH79_DEV_NFC) += dev-nfc.o -obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o -obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o -obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o - -# -# Miscellaneous objects -# -obj-$(CONFIG_ATH79_NVRAM) += nvram.o -obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o -obj-$(CONFIG_ATH79_ROUTERBOOT) += routerboot.o - -# -# Machines -# -obj-$(CONFIG_ATH79_MACH_A60) += mach-a60.o -obj-$(CONFIG_ATH79_MACH_WI2A_AC200I) += mach-wi2a-ac200i.o -obj-$(CONFIG_ATH79_MACH_ALFA_AP120C) += mach-alfa-ap120c.o -obj-$(CONFIG_ATH79_MACH_ALFA_AP96) += mach-alfa-ap96.o -obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o -obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o -obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o -obj-$(CONFIG_ATH79_MACH_ANTMINER_S1) += mach-antminer-s1.o -obj-$(CONFIG_ATH79_MACH_ANTMINER_S3) += mach-antminer-s3.o -obj-$(CONFIG_ATH79_MACH_ANTROUTER_R1) += mach-antrouter-r1.o -obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o -obj-$(CONFIG_ATH79_MACH_AP121F) += mach-ap121f.o -obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o -obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o -obj-$(CONFIG_ATH79_MACH_AP143) += mach-ap143.o -obj-$(CONFIG_ATH79_MACH_AP147) += mach-ap147.o -obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o -obj-$(CONFIG_ATH79_MACH_AP531B0) += mach-ap531b0.o -obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o -obj-$(CONFIG_ATH79_MACH_AP91_5G) += mach-ap91-5g.o -obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o -obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o -obj-$(CONFIG_ATH79_MACH_ARCHER_C58_V1) += mach-archer-c59-v1.o -obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1) += mach-archer-c59-v1.o -obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1) += mach-archer-c60-v1.o -obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V2) += mach-archer-c60-v1.o -obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o -obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7-v4.o -obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7-v5.o -obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o -obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o -obj-$(CONFIG_ATH79_MACH_BHR_4GRV2) += mach-bhr-4grv2.o -obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A) += mach-bhu-bxu2000n2-a.o -obj-$(CONFIG_ATH79_MACH_BSB) += mach-bsb.o -obj-$(CONFIG_ATH79_MACH_C55) += mach-c55.o -obj-$(CONFIG_ATH79_MACH_C60) += mach-c60.o -obj-$(CONFIG_ATH79_MACH_CAP324) += mach-cap324.o -obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o -obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o -obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o -obj-$(CONFIG_ATH79_MACH_CF_E320N_V2) += mach-cf-e316n-v2.o -obj-$(CONFIG_ATH79_MACH_CF_E355AC) += mach-cf-e316n-v2.o -obj-$(CONFIG_ATH79_MACH_CF_E375AC) += mach-cf-e316n-v2.o -obj-$(CONFIG_ATH79_MACH_CF_E380AC_V1) += mach-cf-e316n-v2.o -obj-$(CONFIG_ATH79_MACH_CF_E380AC_V2) += mach-cf-e316n-v2.o -obj-$(CONFIG_ATH79_MACH_CF_E520N) += mach-cf-e316n-v2.o -obj-$(CONFIG_ATH79_MACH_CF_E530N) += mach-cf-e316n-v2.o -obj-$(CONFIG_ATH79_MACH_CPE505N) += mach-r602n.o -obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o -obj-$(CONFIG_ATH79_MACH_CPE830) += mach-ap90q.o -obj-$(CONFIG_ATH79_MACH_CPE870) += mach-cpe870.o -obj-$(CONFIG_ATH79_MACH_CR3000) += mach-cr3000.o -obj-$(CONFIG_ATH79_MACH_CR5000) += mach-cr5000.o -obj-$(CONFIG_ATH79_MACH_DAP_1330_A1) += mach-dap-1330-a1.o -obj-$(CONFIG_ATH79_MACH_DAP_2695_A1) += mach-dap-2695-a1.o -obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o -obj-$(CONFIG_ATH79_MACH_DGL_5500_A1) += mach-dgl-5500-a1.o -obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o -obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o -obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o -obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o -obj-$(CONFIG_ATH79_MACH_DIR_615_I1) += mach-dir-615-i1.o -obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o -obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o -obj-$(CONFIG_ATH79_MACH_DIR_869_A1) += mach-dir-869-a1.o -obj-$(CONFIG_ATH79_MACH_DLAN_HOTSPOT) += mach-dlan-hotspot.o -obj-$(CONFIG_ATH79_MACH_DLAN_PRO_1200_AC) += mach-dlan-pro-1200-ac.o -obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP) += mach-dlan-pro-500-wp.o -obj-$(CONFIG_ATH79_MACH_DOMYWIFI_DW33D) += mach-domywifi-dw33d.o -obj-$(CONFIG_ATH79_MACH_DR342) += mach-dr344.o -obj-$(CONFIG_ATH79_MACH_DR344) += mach-dr344.o -obj-$(CONFIG_ATH79_MACH_DR531) += mach-dr531.o -obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o -obj-$(CONFIG_ATH79_MACH_E1700AC_V2) += mach-e1700ac-v2.o -obj-$(CONFIG_ATH79_MACH_E558_V2) += mach-e558-v2.o -obj-$(CONFIG_ATH79_MACH_E600G_V2) += mach-e600g-v2.o -obj-$(CONFIG_ATH79_MACH_E750A_V4) += mach-e750a-v4.o -obj-$(CONFIG_ATH79_MACH_E750G_V8) += mach-e750g-v8.o -obj-$(CONFIG_ATH79_MACH_EAP120) += mach-eap120.o -obj-$(CONFIG_ATH79_MACH_EAP300V2) += mach-eap300v2.o -obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o -obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o -obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o -obj-$(CONFIG_ATH79_MACH_ENS202EXT) += mach-ens202ext.o -obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o -obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o -obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o -obj-$(CONFIG_ATH79_MACH_EW_BALIN) += mach-ew-balin.o -obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o -obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o -obj-$(CONFIG_ATH79_MACH_FRITZ300E) += mach-fritz300e.o -obj-$(CONFIG_ATH79_MACH_FRITZ4020) += mach-fritz4020.o -obj-$(CONFIG_ATH79_MACH_FRITZ450E) += mach-fritz450e.o -obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o -obj-$(CONFIG_ATH79_MACH_GL_AR300) += mach-gl-ar300.o -obj-$(CONFIG_ATH79_MACH_GL_AR300M) += mach-gl-ar300m.o -obj-$(CONFIG_ATH79_MACH_GL_AR750) += mach-gl-ar750.o -obj-$(CONFIG_ATH79_MACH_GL_AR750S) += mach-gl-ar750s.o -obj-$(CONFIG_ATH79_MACH_GL_DOMINO) += mach-gl-domino.o -obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o -obj-$(CONFIG_ATH79_MACH_GL_MIFI) += mach-gl-mifi.o -obj-$(CONFIG_ATH79_MACH_GL_USB150) += mach-gl-usb150.o -obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V32) += mach-gs-minibox-v32.o -obj-$(CONFIG_ATH79_MACH_GS_OOLITE_V1) += mach-gs-oolite-v1.o -obj-$(CONFIG_ATH79_MACH_GS_OOLITE_V5_2) += mach-gs-oolite-v5-2.o -obj-$(CONFIG_ATH79_MACH_HIVEAP_121) += mach-hiveap-121.o -obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o -obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o -obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o -obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o -obj-$(CONFIG_ATH79_MACH_JWAP230) += mach-jwap230.o -obj-$(CONFIG_ATH79_MACH_KOALA) += mach-koala.o -obj-$(CONFIG_ATH79_MACH_LAN_TURTLE) += mach-lan-turtle.o -obj-$(CONFIG_ATH79_MACH_LIMA) += mach-lima.o -obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o -obj-$(CONFIG_ATH79_MACH_MR12) += mach-mr12.o -obj-$(CONFIG_ATH79_MACH_MR16) += mach-mr16.o -obj-$(CONFIG_ATH79_MACH_MR1750) += mach-mr1750.o -obj-$(CONFIG_ATH79_MACH_MR18) += mach-mr18.o -obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o -obj-$(CONFIG_ATH79_MACH_MR900) += mach-mr900.o -obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o -obj-$(CONFIG_ATH79_MACH_MYNET_N750) += mach-mynet-n750.o -obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o -obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o -obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o -obj-$(CONFIG_ATH79_MACH_N5Q) += mach-n5q.o -obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o -obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o -obj-$(CONFIG_ATH79_MACH_RAMBUTAN) += mach-rambutan.o -obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o -obj-$(CONFIG_ATH79_MACH_OM5P) += mach-om5p.o -obj-$(CONFIG_ATH79_MACH_OM5P_AC) += mach-om5pac.o -obj-$(CONFIG_ATH79_MACH_OM5P_ACv2) += mach-om5pacv2.o -obj-$(CONFIG_ATH79_MACH_OMY_G1) += mach-omy-g1.o -obj-$(CONFIG_ATH79_MACH_OMY_X1) += mach-omy-x1.o -obj-$(CONFIG_ATH79_MACH_ONION_OMEGA) += mach-onion-omega.o -obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o -obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o -obj-$(CONFIG_ATH79_MACH_PQI_AIR_PEN) += mach-pqi-air-pen.o -obj-$(CONFIG_ATH79_MACH_QIHOO_C301) += mach-qihoo-c301.o -obj-$(CONFIG_ATH79_MACH_R36A) += mach-r36a.o -obj-$(CONFIG_ATH79_MACH_R602N) += mach-r602n.o -obj-$(CONFIG_ATH79_MACH_R6100) += mach-r6100.o -obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o -obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o -obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o -obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o -obj-$(CONFIG_ATH79_MACH_RB922) += mach-rb922.o -obj-$(CONFIG_ATH79_MACH_RB941) += mach-rb941.o -obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o -obj-$(CONFIG_ATH79_MACH_RBSPI) += mach-rbspi.o -obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o -obj-$(CONFIG_ATH79_MACH_RE355) += mach-re450.o -obj-$(CONFIG_ATH79_MACH_RE450) += mach-re450.o -obj-$(CONFIG_ATH79_MACH_RME_EG200) += mach-rme-eg200.o -obj-$(CONFIG_ATH79_MACH_RUT9XX) += mach-rut9xx.o -obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o -obj-$(CONFIG_ATH79_MACH_SC1750) += mach-sc1750.o -obj-$(CONFIG_ATH79_MACH_SC300M) += mach-sc300m.o -obj-$(CONFIG_ATH79_MACH_SC450) += mach-sc450.o -obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o -obj-$(CONFIG_ATH79_MACH_SOM9331) += mach-som9331.o -obj-$(CONFIG_ATH79_MACH_SR3200) += mach-sr3200.o -obj-$(CONFIG_ATH79_MACH_T830) += mach-t830.o -obj-$(CONFIG_ATH79_MACH_TELLSTICK_ZNET_LITE) += mach-tellstick-znet-lite.o -obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o -obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o -obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o -obj-$(CONFIG_ATH79_MACH_TEW_732BR) += mach-tew-732br.o -obj-$(CONFIG_ATH79_MACH_TEW_823DRU) += mach-tew-823dru.o -obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o -obj-$(CONFIG_ATH79_MACH_TL_MR13U) += mach-tl-mr13u.o -obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o -obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o -obj-$(CONFIG_ATH79_MACH_TL_MR6400) += mach-tl-mr6400.o -obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2) += mach-tl-wa701nd-v2.o -obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2) += mach-tl-wa7210n-v2.o -obj-$(CONFIG_ATH79_MACH_TL_WA801ND_V3) += mach-tl-wa801nd-v3.o -obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2) += mach-tl-wa830re-v2.o -obj-$(CONFIG_ATH79_MACH_TL_WA850RE_V2) += mach-tl-wax50re.o -obj-$(CONFIG_ATH79_MACH_TL_WA855RE_V1) += mach-tl-wax50re.o -obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o -obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o -obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V4) += mach-tl-wa901nd-v4.o -obj-$(CONFIG_ATH79_MACH_TL_WAX50RE) += mach-tl-wax50re.o -obj-$(CONFIG_ATH79_MACH_TL_WDR3320_V2) += mach-tl-wdr3320-v2.o -obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o -obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o -obj-$(CONFIG_ATH79_MACH_TL_WDR6500_V2) += mach-tl-wdr6500-v2.o -obj-$(CONFIG_ATH79_MACH_TL_WPA8630) += mach-tl-wpa8630.o -obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o -obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o -obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2) += mach-tl-wr1043nd-v2.o -obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V4) += mach-tl-wr1043nd-v4.o -obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o -obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o -obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) += mach-tl-wr720n-v3.o -obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o -obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o -obj-$(CONFIG_ATH79_MACH_TL_WR802N_V1) += mach-tl-wr802n.o -obj-$(CONFIG_ATH79_MACH_TL_WR802N_V2) += mach-tl-wr802n.o -obj-$(CONFIG_ATH79_MACH_TL_WR810N) += mach-tl-wr810n.o -obj-$(CONFIG_ATH79_MACH_TL_WR810N_V2) += mach-tl-wr810n.o -obj-$(CONFIG_ATH79_MACH_TL_WR840N_V2) += mach-tl-wr841n-v9.o -obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o -obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o -obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9) += mach-tl-wr841n-v9.o -obj-$(CONFIG_ATH79_MACH_TL_WR902AC_V1) += mach-tl-wr902ac-v1.o -obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o -obj-$(CONFIG_ATH79_MACH_TL_WR941ND_V6) += mach-tl-wr941nd-v6.o -obj-$(CONFIG_ATH79_MACH_TL_WR940N_V4) += mach-tl-wr940n-v4.o -obj-$(CONFIG_ATH79_MACH_TL_WR942N_V1) += mach-tl-wr942n-v1.o -obj-$(CONFIG_ATH79_MACH_TS_D084) += mach-ts-d084.o -obj-$(CONFIG_ATH79_MACH_TUBE2H) += mach-tube2h.o -obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o -obj-$(CONFIG_ATH79_MACH_UBNT_UNIFIAC) += mach-ubnt-unifiac.o -obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o -obj-$(CONFIG_ATH79_MACH_WAM250) += mach-wam250.o -obj-$(CONFIG_ATH79_MACH_WEIO) += mach-weio.o -obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o -obj-$(CONFIG_ATH79_MACH_WIFI_PINEAPPLE_NANO) += mach-wifi-pineapple-nano.o -obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o -obj-$(CONFIG_ATH79_MACH_WLR8100) += mach-wlr8100.o -obj-$(CONFIG_ATH79_MACH_WNDAP360) += mach-wndap360.o -obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o -obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o -obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o -obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o -obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o -obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o -obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o -obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o -obj-$(CONFIG_ATH79_MACH_WPJ342) += mach-wpj342.o -obj-$(CONFIG_ATH79_MACH_WPJ344) += mach-wpj344.o -obj-$(CONFIG_ATH79_MACH_WPJ531) += mach-wpj531.o -obj-$(CONFIG_ATH79_MACH_WPJ558) += mach-wpj558.o -obj-$(CONFIG_ATH79_MACH_WPJ563) += mach-wpj563.o -obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o -obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o -obj-$(CONFIG_ATH79_MACH_WRTNODE2Q) += mach-wrtnode2q.o -obj-$(CONFIG_ATH79_MACH_WZR_450HP2) += mach-wzr-450hp2.o -obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o -obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o -obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o -obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o -obj-$(CONFIG_ATH79_MACH_XD3200) += mach-sr3200.o -obj-$(CONFIG_ATH79_MACH_Z1) += mach-z1.o -obj-$(CONFIG_ATH79_MACH_ZBT_WE1526) += mach-zbt-we1526.o -obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.c deleted file mode 100644 index 483aed78ed..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * Atheros AP9X reference board PCI initialization - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/ath9k_platform.h> -#include <linux/delay.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-ap9x-pci.h" -#include "pci-ath9k-fixup.h" -#include "pci.h" - -static struct ath9k_platform_data ap9x_wmac0_data = { - .led_pin = -1, -}; -static struct ath9k_platform_data ap9x_wmac1_data = { - .led_pin = -1, -}; -static char ap9x_wmac0_mac[6]; -static char ap9x_wmac1_mac[6]; - -__init void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin) -{ - switch (wmac) { - case 0: - ap9x_wmac0_data.led_pin = pin; - break; - case 1: - ap9x_wmac1_data.led_pin = pin; - break; - } -} - -__init struct ath9k_platform_data *ap9x_pci_get_wmac_data(unsigned wmac) -{ - switch (wmac) { - case 0: - return &ap9x_wmac0_data; - - case 1: - return &ap9x_wmac1_data; - } - - return NULL; -} - -__init void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val) -{ - switch (wmac) { - case 0: - ap9x_wmac0_data.gpio_mask = mask; - ap9x_wmac0_data.gpio_val = val; - break; - case 1: - ap9x_wmac1_data.gpio_mask = mask; - ap9x_wmac1_data.gpio_val = val; - break; - } -} - -__init void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds, - int num_leds) -{ - switch (wmac) { - case 0: - ap9x_wmac0_data.leds = leds; - ap9x_wmac0_data.num_leds = num_leds; - break; - case 1: - ap9x_wmac1_data.leds = leds; - ap9x_wmac1_data.num_leds = num_leds; - break; - } -} - -__init void ap9x_pci_setup_wmac_btns(unsigned wmac, - struct gpio_keys_button *btns, - unsigned num_btns, unsigned poll_interval) -{ - struct ath9k_platform_data *ap9x_wmac_data; - - if (!(ap9x_wmac_data = ap9x_pci_get_wmac_data(wmac))) - return; - - ap9x_wmac_data->btns = btns; - ap9x_wmac_data->num_btns = num_btns; - ap9x_wmac_data->btn_poll_interval = poll_interval; -} - -static int ap91_pci_plat_dev_init(struct pci_dev *dev) -{ - switch (PCI_SLOT(dev->devfn)) { - case 0: - dev->dev.platform_data = &ap9x_wmac0_data; - break; - } - - return 0; -} - -__init void ap91_pci_init(u8 *cal_data, u8 *mac_addr) -{ - if (cal_data) - memcpy(ap9x_wmac0_data.eeprom_data, cal_data, - sizeof(ap9x_wmac0_data.eeprom_data)); - - if (mac_addr) { - memcpy(ap9x_wmac0_mac, mac_addr, sizeof(ap9x_wmac0_mac)); - ap9x_wmac0_data.macaddr = ap9x_wmac0_mac; - } - - ath79_pci_set_plat_dev_init(ap91_pci_plat_dev_init); - ath79_register_pci(); - - pci_enable_ath9k_fixup(0, ap9x_wmac0_data.eeprom_data); -} - -__init void ap91_pci_init_simple(void) -{ - ap91_pci_init(NULL, NULL); - ap9x_wmac0_data.eeprom_name = "pci_wmac0.eeprom"; -} - -static int ap94_pci_plat_dev_init(struct pci_dev *dev) -{ - switch (PCI_SLOT(dev->devfn)) { - case 17: - dev->dev.platform_data = &ap9x_wmac0_data; - break; - - case 18: - dev->dev.platform_data = &ap9x_wmac1_data; - break; - } - - return 0; -} - -__init void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, - u8 *cal_data1, u8 *mac_addr1) -{ - if (cal_data0) - memcpy(ap9x_wmac0_data.eeprom_data, cal_data0, - sizeof(ap9x_wmac0_data.eeprom_data)); - - if (cal_data1) - memcpy(ap9x_wmac1_data.eeprom_data, cal_data1, - sizeof(ap9x_wmac1_data.eeprom_data)); - - if (mac_addr0) { - memcpy(ap9x_wmac0_mac, mac_addr0, sizeof(ap9x_wmac0_mac)); - ap9x_wmac0_data.macaddr = ap9x_wmac0_mac; - } - - if (mac_addr1) { - memcpy(ap9x_wmac1_mac, mac_addr1, sizeof(ap9x_wmac1_mac)); - ap9x_wmac1_data.macaddr = ap9x_wmac1_mac; - } - - ath79_pci_set_plat_dev_init(ap94_pci_plat_dev_init); - ath79_register_pci(); - - pci_enable_ath9k_fixup(17, ap9x_wmac0_data.eeprom_data); - pci_enable_ath9k_fixup(18, ap9x_wmac1_data.eeprom_data); -} diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.h b/target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.h deleted file mode 100644 index d2a045fc1c..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Atheros AP9X reference board PCI initialization - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_DEV_AP9X_PCI_H -#define _ATH79_DEV_AP9X_PCI_H - -struct gpio_led; -struct gpio_keys_button; -struct ath9k_platform_data; - -#if defined(CONFIG_ATH79_DEV_AP9X_PCI) -void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin); -void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val); -void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds, - int num_leds); -void ap9x_pci_setup_wmac_btns(unsigned wmac, struct gpio_keys_button *btns, - unsigned num_btns, unsigned poll_interval); -struct ath9k_platform_data *ap9x_pci_get_wmac_data(unsigned wmac); - -void ap91_pci_init(u8 *cal_data, u8 *mac_addr); -void ap91_pci_init_simple(void); -void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, - u8 *cal_data1, u8 *mac_addr1); - -#else -static inline void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin) {} -static inline void ap9x_pci_setup_wmac_gpio(unsigned wmac, - u32 mask, u32 val) {} -static inline void ap9x_pci_setup_wmac_leds(unsigned wmac, - struct gpio_led *leds, - int num_leds) {} -static inline void ap9x_pci_setup_wmac_btns(unsigned wmac, - struct gpio_keys_button *btns, - unsigned num_btns, - unsigned poll_interval) {} -static inline struct ath9k_platform_data *ap9x_pci_get_wmac_data(unsigned wmac) -{ - return NULL; -} - -static inline void ap91_pci_init(u8 *cal_data, u8 *mac_addr) {} -static inline void ap91_pci_init_simple(void) {} -static inline void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, - u8 *cal_data1, u8 *mac_addr1) {} -#endif - -#endif /* _ATH79_DEV_AP9X_PCI_H */ - diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.c deleted file mode 100644 index 4ade218f7e..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Atheros AR71xx DSA switch device support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-dsa.h" - -static struct platform_device ar71xx_dsa_switch_device = { - .name = "dsa", - .id = 0, -}; - -void __init ath79_register_dsa(struct device *netdev, - struct device *miidev, - struct dsa_platform_data *d) -{ - int i; - - d->netdev = netdev; - for (i = 0; i < d->nr_chips; i++) - d->chip[i].host_dev = miidev; - - ar71xx_dsa_switch_device.dev.platform_data = d; - platform_device_register(&ar71xx_dsa_switch_device); -} diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.h b/target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.h deleted file mode 100644 index 3730202e8d..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Atheros AR71xx DSA switch device support - * - * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_DEV_DSA_H -#define _ATH79_DEV_DSA_H - -#include <net/dsa.h> - -void ath79_register_dsa(struct device *netdev, - struct device *miidev, - struct dsa_platform_data *d); - -#endif /* _ATH79_DEV_DSA_H */ diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c deleted file mode 100644 index 1e230bce61..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c +++ /dev/null @@ -1,1262 +0,0 @@ -/* - * Atheros AR71xx SoC platform devices - * - * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Parts of this file are based on Atheros 2.6.15 BSP - * Parts of this file are based on Atheros 2.6.31 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/etherdevice.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/clk.h> -#include <linux/sizes.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/irq.h> - -#include "common.h" -#include "dev-eth.h" - -unsigned char ath79_mac_base[ETH_ALEN] __initdata; - -static struct resource ath79_mdio0_resources[] = { - { - .name = "mdio_base", - .flags = IORESOURCE_MEM, - .start = AR71XX_GE0_BASE, - .end = AR71XX_GE0_BASE + 0x200 - 1, - } -}; - -struct ag71xx_mdio_platform_data ath79_mdio0_data; - -struct platform_device ath79_mdio0_device = { - .name = "ag71xx-mdio", - .id = 0, - .resource = ath79_mdio0_resources, - .num_resources = ARRAY_SIZE(ath79_mdio0_resources), - .dev = { - .platform_data = &ath79_mdio0_data, - }, -}; - -static struct resource ath79_mdio1_resources[] = { - { - .name = "mdio_base", - .flags = IORESOURCE_MEM, - .start = AR71XX_GE1_BASE, - .end = AR71XX_GE1_BASE + 0x200 - 1, - } -}; - -struct ag71xx_mdio_platform_data ath79_mdio1_data; - -struct platform_device ath79_mdio1_device = { - .name = "ag71xx-mdio", - .id = 1, - .resource = ath79_mdio1_resources, - .num_resources = ARRAY_SIZE(ath79_mdio1_resources), - .dev = { - .platform_data = &ath79_mdio1_data, - }, -}; - -static void ath79_set_pll(u32 cfg_reg, u32 pll_reg, u32 pll_val, u32 shift) -{ - void __iomem *base; - u32 t; - - base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE); - - t = __raw_readl(base + cfg_reg); - t &= ~(3 << shift); - t |= (2 << shift); - __raw_writel(t, base + cfg_reg); - udelay(100); - - __raw_writel(pll_val, base + pll_reg); - - t |= (3 << shift); - __raw_writel(t, base + cfg_reg); - udelay(100); - - t &= ~(3 << shift); - __raw_writel(t, base + cfg_reg); - udelay(100); - - printk(KERN_DEBUG "ar71xx: pll_reg %#x: %#x\n", - (unsigned int)(base + pll_reg), __raw_readl(base + pll_reg)); - - iounmap(base); -} - -static void __init ath79_mii_ctrl_set_if(unsigned int reg, - unsigned int mii_if) -{ - void __iomem *base; - u32 t; - - base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE); - - t = __raw_readl(base + reg); - t &= ~(AR71XX_MII_CTRL_IF_MASK); - t |= (mii_if & AR71XX_MII_CTRL_IF_MASK); - __raw_writel(t, base + reg); - - iounmap(base); -} - -static void ath79_mii_ctrl_set_speed(unsigned int reg, unsigned int speed) -{ - void __iomem *base; - unsigned int mii_speed; - u32 t; - - switch (speed) { - case SPEED_10: - mii_speed = AR71XX_MII_CTRL_SPEED_10; - break; - case SPEED_100: - mii_speed = AR71XX_MII_CTRL_SPEED_100; - break; - case SPEED_1000: - mii_speed = AR71XX_MII_CTRL_SPEED_1000; - break; - default: - BUG(); - } - - base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE); - - t = __raw_readl(base + reg); - t &= ~(AR71XX_MII_CTRL_SPEED_MASK << AR71XX_MII_CTRL_SPEED_SHIFT); - t |= mii_speed << AR71XX_MII_CTRL_SPEED_SHIFT; - __raw_writel(t, base + reg); - - iounmap(base); -} - -static unsigned long ar934x_get_mdio_ref_clock(void) -{ - void __iomem *base; - unsigned long ret; - u32 t; - - base = ioremap(AR71XX_PLL_BASE, AR71XX_PLL_SIZE); - - ret = 0; - t = __raw_readl(base + AR934X_PLL_SWITCH_CLOCK_CONTROL_REG); - if (t & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL) { - ret = 100 * 1000 * 1000; - } else { - struct clk *clk; - - clk = clk_get(NULL, "ref"); - if (!IS_ERR(clk)) - ret = clk_get_rate(clk); - } - - iounmap(base); - - return ret; -} - -void __init ath79_register_mdio(unsigned int id, u32 phy_mask) -{ - struct platform_device *mdio_dev; - struct ag71xx_mdio_platform_data *mdio_data; - unsigned int max_id; - - if (ath79_soc == ATH79_SOC_AR9341 || - ath79_soc == ATH79_SOC_AR9342 || - ath79_soc == ATH79_SOC_AR9344 || - ath79_soc == ATH79_SOC_QCA9556 || - ath79_soc == ATH79_SOC_QCA9558 || - ath79_soc == ATH79_SOC_QCA956X) - max_id = 1; - else - max_id = 0; - - if (id > max_id) { - printk(KERN_ERR "ar71xx: invalid MDIO id %u\n", id); - return; - } - - switch (ath79_soc) { - case ATH79_SOC_AR7241: - case ATH79_SOC_AR9330: - case ATH79_SOC_AR9331: - case ATH79_SOC_QCA9533: - case ATH79_SOC_TP9343: - mdio_dev = &ath79_mdio1_device; - mdio_data = &ath79_mdio1_data; - break; - - case ATH79_SOC_AR9341: - case ATH79_SOC_AR9342: - case ATH79_SOC_AR9344: - case ATH79_SOC_QCA9556: - case ATH79_SOC_QCA9558: - case ATH79_SOC_QCA956X: - if (id == 0) { - mdio_dev = &ath79_mdio0_device; - mdio_data = &ath79_mdio0_data; - } else { - mdio_dev = &ath79_mdio1_device; - mdio_data = &ath79_mdio1_data; - } - break; - - case ATH79_SOC_AR7242: - ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, - AR7242_PLL_REG_ETH0_INT_CLOCK, 0x62000000, - AR71XX_ETH0_PLL_SHIFT); - /* fall through */ - default: - mdio_dev = &ath79_mdio0_device; - mdio_data = &ath79_mdio0_data; - break; - } - - mdio_data->phy_mask = phy_mask; - - switch (ath79_soc) { - case ATH79_SOC_AR7240: - mdio_data->is_ar7240 = 1; - /* fall through */ - case ATH79_SOC_AR7241: - mdio_data->builtin_switch = 1; - break; - - case ATH79_SOC_AR9330: - mdio_data->is_ar9330 = 1; - /* fall through */ - case ATH79_SOC_AR9331: - mdio_data->builtin_switch = 1; - break; - - case ATH79_SOC_AR9341: - case ATH79_SOC_AR9342: - case ATH79_SOC_AR9344: - if (id == 1) { - mdio_data->builtin_switch = 1; - mdio_data->ref_clock = ar934x_get_mdio_ref_clock(); - mdio_data->mdio_clock = 6250000; - } - mdio_data->is_ar934x = 1; - break; - - case ATH79_SOC_QCA9533: - case ATH79_SOC_TP9343: - mdio_data->builtin_switch = 1; - break; - - case ATH79_SOC_QCA9556: - case ATH79_SOC_QCA9558: - mdio_data->is_ar934x = 1; - break; - - case ATH79_SOC_QCA956X: - if (id == 1) - mdio_data->builtin_switch = 1; - mdio_data->is_ar934x = 1; - break; - - default: - break; - } - - platform_device_register(mdio_dev); -} - -struct ath79_eth_pll_data ath79_eth0_pll_data; -struct ath79_eth_pll_data ath79_eth1_pll_data; - -static u32 ath79_get_eth_pll(unsigned int mac, int speed) -{ - struct ath79_eth_pll_data *pll_data; - u32 pll_val; - - switch (mac) { - case 0: - pll_data = &ath79_eth0_pll_data; - break; - case 1: - pll_data = &ath79_eth1_pll_data; - break; - default: - BUG(); - } - - switch (speed) { - case SPEED_10: - pll_val = pll_data->pll_10; - break; - case SPEED_100: - pll_val = pll_data->pll_100; - break; - case SPEED_1000: - pll_val = pll_data->pll_1000; - break; - default: - BUG(); - } - - return pll_val; -} - -static void ath79_set_speed_ge0(int speed) -{ - u32 val = ath79_get_eth_pll(0, speed); - - ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH0_INT_CLOCK, - val, AR71XX_ETH0_PLL_SHIFT); - ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed); -} - -static void ath79_set_speed_ge1(int speed) -{ - u32 val = ath79_get_eth_pll(1, speed); - - ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH1_INT_CLOCK, - val, AR71XX_ETH1_PLL_SHIFT); - ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed); -} - -static void ar7242_set_speed_ge0(int speed) -{ - u32 val = ath79_get_eth_pll(0, speed); - void __iomem *base; - - base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE); - __raw_writel(val, base + AR7242_PLL_REG_ETH0_INT_CLOCK); - iounmap(base); -} - -static void ar91xx_set_speed_ge0(int speed) -{ - u32 val = ath79_get_eth_pll(0, speed); - - ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH0_INT_CLOCK, - val, AR913X_ETH0_PLL_SHIFT); - ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed); -} - -static void ar91xx_set_speed_ge1(int speed) -{ - u32 val = ath79_get_eth_pll(1, speed); - - ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH1_INT_CLOCK, - val, AR913X_ETH1_PLL_SHIFT); - ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed); -} - -static void ar934x_set_speed_ge0(int speed) -{ - void __iomem *base; - u32 val = ath79_get_eth_pll(0, speed); - - base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE); - __raw_writel(val, base + AR934X_PLL_ETH_XMII_CONTROL_REG); - iounmap(base); -} - -static void qca955x_set_speed_xmii(int speed) -{ - void __iomem *base; - u32 val = ath79_get_eth_pll(0, speed); - - base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE); - __raw_writel(val, base + QCA955X_PLL_ETH_XMII_CONTROL_REG); - iounmap(base); -} - -static void qca955x_set_speed_sgmii(int id, int speed) -{ - void __iomem *base; - u32 val = ath79_get_eth_pll(id, speed); - - base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE); - __raw_writel(val, base + QCA955X_PLL_ETH_SGMII_CONTROL_REG); - iounmap(base); -} - -static void qca9556_set_speed_sgmii(int speed) -{ - qca955x_set_speed_sgmii(0, speed); -} - -static void qca9558_set_speed_sgmii(int speed) -{ - qca955x_set_speed_sgmii(1, speed); -} - -static void qca956x_set_speed_sgmii(int speed) -{ - void __iomem *base; - u32 val = ath79_get_eth_pll(0, speed); - - base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE); - __raw_writel(val, base + QCA955X_PLL_ETH_SGMII_CONTROL_REG); - iounmap(base); -} - -static void ath79_set_speed_dummy(int speed) -{ -} - -static void ath79_ddr_flush_ge0(void) -{ - ath79_ddr_wb_flush(0); -} - -static void ath79_ddr_flush_ge1(void) -{ - ath79_ddr_wb_flush(1); -} - -static struct resource ath79_eth0_resources[] = { - { - .name = "mac_base", - .flags = IORESOURCE_MEM, - .start = AR71XX_GE0_BASE, - .end = AR71XX_GE0_BASE + 0x200 - 1, - }, { - .name = "mac_irq", - .flags = IORESOURCE_IRQ, - .start = ATH79_CPU_IRQ(4), - .end = ATH79_CPU_IRQ(4), - }, -}; - -struct ag71xx_platform_data ath79_eth0_data = { - .reset_bit = AR71XX_RESET_GE0_MAC, -}; - -struct platform_device ath79_eth0_device = { - .name = "ag71xx", - .id = 0, - .resource = ath79_eth0_resources, - .num_resources = ARRAY_SIZE(ath79_eth0_resources), - .dev = { - .platform_data = &ath79_eth0_data, - }, -}; - -static struct resource ath79_eth1_resources[] = { - { - .name = "mac_base", - .flags = IORESOURCE_MEM, - .start = AR71XX_GE1_BASE, - .end = AR71XX_GE1_BASE + 0x200 - 1, - }, { - .name = "mac_irq", - .flags = IORESOURCE_IRQ, - .start = ATH79_CPU_IRQ(5), - .end = ATH79_CPU_IRQ(5), - }, -}; - -struct ag71xx_platform_data ath79_eth1_data = { - .reset_bit = AR71XX_RESET_GE1_MAC, -}; - -struct platform_device ath79_eth1_device = { - .name = "ag71xx", - .id = 1, - .resource = ath79_eth1_resources, - .num_resources = ARRAY_SIZE(ath79_eth1_resources), - .dev = { - .platform_data = &ath79_eth1_data, - }, -}; - -struct ag71xx_switch_platform_data ath79_switch_data; - -#define AR71XX_PLL_VAL_1000 0x00110000 -#define AR71XX_PLL_VAL_100 0x00001099 -#define AR71XX_PLL_VAL_10 0x00991099 - -#define AR724X_PLL_VAL_1000 0x00110000 -#define AR724X_PLL_VAL_100 0x00001099 -#define AR724X_PLL_VAL_10 0x00991099 - -#define AR7242_PLL_VAL_1000 0x16000000 -#define AR7242_PLL_VAL_100 0x00000101 -#define AR7242_PLL_VAL_10 0x00001616 - -#define AR913X_PLL_VAL_1000 0x1a000000 -#define AR913X_PLL_VAL_100 0x13000a44 -#define AR913X_PLL_VAL_10 0x00441099 - -#define AR933X_PLL_VAL_1000 0x00110000 -#define AR933X_PLL_VAL_100 0x00001099 -#define AR933X_PLL_VAL_10 0x00991099 - -#define AR934X_PLL_VAL_1000 0x16000000 -#define AR934X_PLL_VAL_100 0x00000101 -#define AR934X_PLL_VAL_10 0x00001616 - -#define QCA956X_PLL_VAL_1000 0x03000000 -#define QCA956X_PLL_VAL_100 0x00000101 -#define QCA956X_PLL_VAL_10 0x00001919 - -static void __init ath79_init_eth_pll_data(unsigned int id) -{ - struct ath79_eth_pll_data *pll_data; - u32 pll_10, pll_100, pll_1000; - - switch (id) { - case 0: - pll_data = &ath79_eth0_pll_data; - break; - case 1: - pll_data = &ath79_eth1_pll_data; - break; - default: - BUG(); - } - - switch (ath79_soc) { - case ATH79_SOC_AR7130: - case ATH79_SOC_AR7141: - case ATH79_SOC_AR7161: - pll_10 = AR71XX_PLL_VAL_10; - pll_100 = AR71XX_PLL_VAL_100; - pll_1000 = AR71XX_PLL_VAL_1000; - break; - - case ATH79_SOC_AR7240: - case ATH79_SOC_AR7241: - pll_10 = AR724X_PLL_VAL_10; - pll_100 = AR724X_PLL_VAL_100; - pll_1000 = AR724X_PLL_VAL_1000; - break; - - case ATH79_SOC_AR7242: - pll_10 = AR7242_PLL_VAL_10; - pll_100 = AR7242_PLL_VAL_100; - pll_1000 = AR7242_PLL_VAL_1000; - break; - - case ATH79_SOC_AR9130: - case ATH79_SOC_AR9132: - pll_10 = AR913X_PLL_VAL_10; - pll_100 = AR913X_PLL_VAL_100; - pll_1000 = AR913X_PLL_VAL_1000; - break; - - case ATH79_SOC_AR9330: - case ATH79_SOC_AR9331: - pll_10 = AR933X_PLL_VAL_10; - pll_100 = AR933X_PLL_VAL_100; - pll_1000 = AR933X_PLL_VAL_1000; - break; - - case ATH79_SOC_AR9341: - case ATH79_SOC_AR9342: - case ATH79_SOC_AR9344: - case ATH79_SOC_QCA9533: - case ATH79_SOC_QCA9556: - case ATH79_SOC_QCA9558: - case ATH79_SOC_TP9343: - pll_10 = AR934X_PLL_VAL_10; - pll_100 = AR934X_PLL_VAL_100; - pll_1000 = AR934X_PLL_VAL_1000; - break; - - case ATH79_SOC_QCA956X: - pll_10 = QCA956X_PLL_VAL_10; - pll_100 = QCA956X_PLL_VAL_100; - pll_1000 = QCA956X_PLL_VAL_1000; - break; - - default: - BUG(); - } - - if (!pll_data->pll_10) - pll_data->pll_10 = pll_10; - - if (!pll_data->pll_100) - pll_data->pll_100 = pll_100; - - if (!pll_data->pll_1000) - pll_data->pll_1000 = pll_1000; -} - -static int __init ath79_setup_phy_if_mode(unsigned int id, - struct ag71xx_platform_data *pdata) -{ - unsigned int mii_if; - - switch (id) { - case 0: - switch (ath79_soc) { - case ATH79_SOC_AR7130: - case ATH79_SOC_AR7141: - case ATH79_SOC_AR7161: - case ATH79_SOC_AR9130: - case ATH79_SOC_AR9132: - switch (pdata->phy_if_mode) { - case PHY_INTERFACE_MODE_MII: - mii_if = AR71XX_MII0_CTRL_IF_MII; - break; - case PHY_INTERFACE_MODE_GMII: - mii_if = AR71XX_MII0_CTRL_IF_GMII; - break; - case PHY_INTERFACE_MODE_RGMII: - mii_if = AR71XX_MII0_CTRL_IF_RGMII; - break; - case PHY_INTERFACE_MODE_RMII: - mii_if = AR71XX_MII0_CTRL_IF_RMII; - break; - default: - return -EINVAL; - } - ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII0_CTRL, mii_if); - break; - - case ATH79_SOC_AR7240: - case ATH79_SOC_AR7241: - case ATH79_SOC_AR9330: - case ATH79_SOC_AR9331: - case ATH79_SOC_QCA9533: - case ATH79_SOC_TP9343: - pdata->phy_if_mode = PHY_INTERFACE_MODE_MII; - break; - - case ATH79_SOC_AR7242: - /* FIXME */ - - case ATH79_SOC_AR9341: - case ATH79_SOC_AR9342: - case ATH79_SOC_AR9344: - switch (pdata->phy_if_mode) { - case PHY_INTERFACE_MODE_MII: - case PHY_INTERFACE_MODE_GMII: - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RMII: - break; - default: - return -EINVAL; - } - break; - - case ATH79_SOC_QCA9556: - case ATH79_SOC_QCA9558: - case ATH79_SOC_QCA956X: - switch (pdata->phy_if_mode) { - case PHY_INTERFACE_MODE_MII: - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_SGMII: - break; - default: - return -EINVAL; - } - break; - - default: - BUG(); - } - break; - case 1: - switch (ath79_soc) { - case ATH79_SOC_AR7130: - case ATH79_SOC_AR7141: - case ATH79_SOC_AR7161: - case ATH79_SOC_AR9130: - case ATH79_SOC_AR9132: - switch (pdata->phy_if_mode) { - case PHY_INTERFACE_MODE_RMII: - mii_if = AR71XX_MII1_CTRL_IF_RMII; - break; - case PHY_INTERFACE_MODE_RGMII: - mii_if = AR71XX_MII1_CTRL_IF_RGMII; - break; - default: - return -EINVAL; - } - ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII1_CTRL, mii_if); - break; - - case ATH79_SOC_AR7240: - case ATH79_SOC_AR7241: - case ATH79_SOC_AR9330: - case ATH79_SOC_AR9331: - case ATH79_SOC_TP9343: - pdata->phy_if_mode = PHY_INTERFACE_MODE_GMII; - break; - - case ATH79_SOC_AR7242: - /* FIXME */ - - case ATH79_SOC_AR9341: - case ATH79_SOC_AR9342: - case ATH79_SOC_AR9344: - case ATH79_SOC_QCA9533: - case ATH79_SOC_QCA956X: - switch (pdata->phy_if_mode) { - case PHY_INTERFACE_MODE_MII: - case PHY_INTERFACE_MODE_GMII: - break; - default: - return -EINVAL; - } - break; - - case ATH79_SOC_QCA9556: - case ATH79_SOC_QCA9558: - switch (pdata->phy_if_mode) { - case PHY_INTERFACE_MODE_MII: - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_SGMII: - break; - default: - return -EINVAL; - } - break; - - default: - BUG(); - } - break; - } - - return 0; -} - -void __init ath79_setup_ar933x_phy4_switch(bool mac, bool mdio) -{ - void __iomem *base; - u32 t; - - base = ioremap(AR933X_GMAC_BASE, AR933X_GMAC_SIZE); - - t = __raw_readl(base + AR933X_GMAC_REG_ETH_CFG); - t &= ~(AR933X_ETH_CFG_SW_PHY_SWAP | AR933X_ETH_CFG_SW_PHY_ADDR_SWAP); - if (mac) - t |= AR933X_ETH_CFG_SW_PHY_SWAP; - if (mdio) - t |= AR933X_ETH_CFG_SW_PHY_ADDR_SWAP; - __raw_writel(t, base + AR933X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - -void __init ath79_setup_ar934x_eth_cfg(u32 mask) -{ - void __iomem *base; - u32 t; - - base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE); - - t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG); - - t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | - AR934X_ETH_CFG_MII_GMAC0 | - AR934X_ETH_CFG_GMII_GMAC0 | - AR934X_ETH_CFG_SW_ONLY_MODE | - AR934X_ETH_CFG_SW_PHY_SWAP); - - t |= mask; - - __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG); - /* flush write */ - __raw_readl(base + AR934X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - -void __init ath79_setup_ar934x_eth_rx_delay(unsigned int rxd, - unsigned int rxdv) -{ - void __iomem *base; - u32 t; - - rxd &= AR934X_ETH_CFG_RXD_DELAY_MASK; - rxdv &= AR934X_ETH_CFG_RDV_DELAY_MASK; - - base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE); - - t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG); - - t &= ~(AR934X_ETH_CFG_RXD_DELAY_MASK << AR934X_ETH_CFG_RXD_DELAY_SHIFT | - AR934X_ETH_CFG_RDV_DELAY_MASK << AR934X_ETH_CFG_RDV_DELAY_SHIFT); - - t |= (rxd << AR934X_ETH_CFG_RXD_DELAY_SHIFT | - rxdv << AR934X_ETH_CFG_RDV_DELAY_SHIFT); - - __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG); - /* flush write */ - __raw_readl(base + AR934X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - -void __init ath79_setup_qca955x_eth_cfg(u32 mask) -{ - void __iomem *base; - u32 t; - - base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); - - t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG); - - t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII); - - t |= mask; - - __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - -void __init ath79_setup_qca956x_eth_cfg(u32 mask) -{ - void __iomem *base; - u32 t; - - base = ioremap(QCA956X_GMAC_BASE, QCA956X_GMAC_SIZE); - - t = __raw_readl(base + QCA956X_GMAC_REG_ETH_CFG); - - t &= ~(QCA956X_ETH_CFG_SW_ONLY_MODE | - QCA956X_ETH_CFG_SW_PHY_SWAP); - - t |= mask; - - __raw_writel(t, base + QCA956X_GMAC_REG_ETH_CFG); - /* flush write */ - __raw_readl(base + QCA956X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - -static int ath79_eth_instance __initdata; -void __init ath79_register_eth(unsigned int id) -{ - struct platform_device *pdev; - struct ag71xx_platform_data *pdata; - int err; - - if (id > 1) { - printk(KERN_ERR "ar71xx: invalid ethernet id %d\n", id); - return; - } - - ath79_init_eth_pll_data(id); - - if (id == 0) - pdev = &ath79_eth0_device; - else - pdev = &ath79_eth1_device; - - pdata = pdev->dev.platform_data; - - pdata->max_frame_len = 1540; - pdata->desc_pktlen_mask = 0xfff; - - err = ath79_setup_phy_if_mode(id, pdata); - if (err) { - printk(KERN_ERR - "ar71xx: invalid PHY interface mode for GE%u\n", id); - return; - } - - if (id == 0) - pdata->ddr_flush = ath79_ddr_flush_ge0; - else - pdata->ddr_flush = ath79_ddr_flush_ge1; - - switch (ath79_soc) { - case ATH79_SOC_AR7130: - if (id == 0) - pdata->set_speed = ath79_set_speed_ge0; - else - pdata->set_speed = ath79_set_speed_ge1; - break; - - case ATH79_SOC_AR7141: - case ATH79_SOC_AR7161: - if (id == 0) - pdata->set_speed = ath79_set_speed_ge0; - else - pdata->set_speed = ath79_set_speed_ge1; - pdata->has_gbit = 1; - break; - - case ATH79_SOC_AR7242: - if (id == 0) { - pdata->reset_bit |= AR724X_RESET_GE0_MDIO | - AR71XX_RESET_GE0_PHY; - pdata->set_speed = ar7242_set_speed_ge0; - } else { - pdata->reset_bit |= AR724X_RESET_GE1_MDIO | - AR71XX_RESET_GE1_PHY; - pdata->set_speed = ath79_set_speed_dummy; - } - pdata->has_gbit = 1; - pdata->is_ar724x = 1; - break; - - case ATH79_SOC_AR7241: - if (id == 0) - pdata->reset_bit |= AR724X_RESET_GE0_MDIO; - else - pdata->reset_bit |= AR724X_RESET_GE1_MDIO; - /* fall through */ - case ATH79_SOC_AR7240: - if (id == 0) { - pdata->reset_bit |= AR71XX_RESET_GE0_PHY; - pdata->set_speed = ath79_set_speed_dummy; - - pdata->phy_mask = BIT(4); - } else { - pdata->reset_bit |= AR71XX_RESET_GE1_PHY; - pdata->set_speed = ath79_set_speed_dummy; - - pdata->speed = SPEED_1000; - pdata->duplex = DUPLEX_FULL; - pdata->switch_data = &ath79_switch_data; - pdata->use_flow_control = 1; - - ath79_switch_data.phy_poll_mask |= BIT(4); - } - pdata->has_gbit = 1; - pdata->is_ar724x = 1; - if (ath79_soc == ATH79_SOC_AR7240) - pdata->is_ar7240 = 1; - break; - - case ATH79_SOC_AR9132: - pdata->has_gbit = 1; - /* fall through */ - case ATH79_SOC_AR9130: - if (id == 0) - pdata->set_speed = ar91xx_set_speed_ge0; - else - pdata->set_speed = ar91xx_set_speed_ge1; - pdata->is_ar91xx = 1; - break; - - case ATH79_SOC_AR9330: - case ATH79_SOC_AR9331: - if (id == 0) { - pdata->reset_bit = AR933X_RESET_GE0_MAC | - AR933X_RESET_GE0_MDIO; - pdata->set_speed = ath79_set_speed_dummy; - - pdata->phy_mask = BIT(4); - } else { - pdata->reset_bit = AR933X_RESET_GE1_MAC | - AR933X_RESET_GE1_MDIO; - pdata->set_speed = ath79_set_speed_dummy; - - pdata->speed = SPEED_1000; - pdata->has_gbit = 1; - pdata->duplex = DUPLEX_FULL; - pdata->switch_data = &ath79_switch_data; - pdata->use_flow_control = 1; - - ath79_switch_data.phy_poll_mask |= BIT(4); - } - - pdata->is_ar724x = 1; - break; - - case ATH79_SOC_AR9341: - case ATH79_SOC_AR9342: - case ATH79_SOC_AR9344: - case ATH79_SOC_QCA9533: - if (id == 0) { - pdata->reset_bit = AR934X_RESET_GE0_MAC | - AR934X_RESET_GE0_MDIO; - pdata->set_speed = ar934x_set_speed_ge0; - - if (ath79_soc == ATH79_SOC_QCA9533) - pdata->disable_inline_checksum_engine = 1; - } else { - pdata->reset_bit = AR934X_RESET_GE1_MAC | - AR934X_RESET_GE1_MDIO; - pdata->set_speed = ath79_set_speed_dummy; - - pdata->switch_data = &ath79_switch_data; - - /* reset the built-in switch */ - ath79_device_reset_set(AR934X_RESET_ETH_SWITCH); - ath79_device_reset_clear(AR934X_RESET_ETH_SWITCH); - } - - pdata->has_gbit = 1; - pdata->is_ar724x = 1; - - pdata->max_frame_len = SZ_16K - 1; - pdata->desc_pktlen_mask = SZ_16K - 1; - break; - - case ATH79_SOC_TP9343: - if (id == 0) { - pdata->reset_bit = AR933X_RESET_GE0_MAC | - AR933X_RESET_GE0_MDIO; - pdata->set_speed = ath79_set_speed_dummy; - - if (!pdata->phy_mask) - pdata->phy_mask = BIT(4); - } else { - pdata->reset_bit = AR933X_RESET_GE1_MAC | - AR933X_RESET_GE1_MDIO; - pdata->set_speed = ath79_set_speed_dummy; - - pdata->speed = SPEED_1000; - pdata->duplex = DUPLEX_FULL; - pdata->switch_data = &ath79_switch_data; - pdata->use_flow_control = 1; - - ath79_switch_data.phy_poll_mask |= BIT(4); - } - - pdata->has_gbit = 1; - pdata->is_ar724x = 1; - break; - - case ATH79_SOC_QCA9556: - case ATH79_SOC_QCA9558: - if (id == 0) { - pdata->reset_bit = QCA955X_RESET_GE0_MAC | - QCA955X_RESET_GE0_MDIO; - pdata->set_speed = qca955x_set_speed_xmii; - - /* QCA9556 only has SGMII interface */ - if (ath79_soc == ATH79_SOC_QCA9556) - pdata->set_speed = qca9556_set_speed_sgmii; - } else { - pdata->reset_bit = QCA955X_RESET_GE1_MAC | - QCA955X_RESET_GE1_MDIO; - pdata->set_speed = qca9558_set_speed_sgmii; - } - - pdata->has_gbit = 1; - pdata->is_ar724x = 1; - - /* - * Limit the maximum frame length to 4095 bytes. - * Although the documentation says that the hardware - * limit is 16383 bytes but that does not work in - * practice. It seems that the hardware only updates - * the lowest 12 bits of the packet length field - * in the RX descriptor. - */ - pdata->max_frame_len = SZ_4K - 1; - pdata->desc_pktlen_mask = SZ_16K - 1; - break; - - case ATH79_SOC_QCA956X: - if (id == 0) { - pdata->reset_bit = QCA955X_RESET_GE0_MAC | - QCA955X_RESET_GE0_MDIO; - - if (pdata->phy_if_mode == PHY_INTERFACE_MODE_SGMII) - pdata->set_speed = qca956x_set_speed_sgmii; - else - pdata->set_speed = ar934x_set_speed_ge0; - - pdata->disable_inline_checksum_engine = 1; - } else { - pdata->reset_bit = QCA955X_RESET_GE1_MAC | - QCA955X_RESET_GE1_MDIO; - - pdata->set_speed = ath79_set_speed_dummy; - - pdata->switch_data = &ath79_switch_data; - - pdata->speed = SPEED_1000; - pdata->duplex = DUPLEX_FULL; - pdata->use_flow_control = 1; - - /* reset the built-in switch */ - ath79_device_reset_set(AR934X_RESET_ETH_SWITCH); - ath79_device_reset_clear(AR934X_RESET_ETH_SWITCH); - } - - pdata->has_gbit = 1; - pdata->is_ar724x = 1; - break; - - default: - BUG(); - } - - switch (pdata->phy_if_mode) { - case PHY_INTERFACE_MODE_GMII: - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_SGMII: - if (!pdata->has_gbit) { - printk(KERN_ERR "ar71xx: no gbit available on eth%d\n", - id); - return; - } - /* fallthrough */ - default: - break; - } - - if (!is_valid_ether_addr(pdata->mac_addr)) { - random_ether_addr(pdata->mac_addr); - printk(KERN_DEBUG - "ar71xx: using random MAC address for eth%d\n", - ath79_eth_instance); - } - - if (pdata->mii_bus_dev == NULL) { - switch (ath79_soc) { - case ATH79_SOC_AR9341: - case ATH79_SOC_AR9342: - case ATH79_SOC_AR9344: - if (id == 0) - pdata->mii_bus_dev = &ath79_mdio0_device.dev; - else - pdata->mii_bus_dev = &ath79_mdio1_device.dev; - break; - - case ATH79_SOC_AR7241: - case ATH79_SOC_AR9330: - case ATH79_SOC_AR9331: - case ATH79_SOC_QCA9533: - case ATH79_SOC_TP9343: - pdata->mii_bus_dev = &ath79_mdio1_device.dev; - break; - - case ATH79_SOC_QCA9556: - case ATH79_SOC_QCA9558: - /* don't assign any MDIO device by default */ - break; - - case ATH79_SOC_QCA956X: - if (pdata->phy_if_mode != PHY_INTERFACE_MODE_SGMII) - pdata->mii_bus_dev = &ath79_mdio1_device.dev; - break; - - default: - pdata->mii_bus_dev = &ath79_mdio0_device.dev; - break; - } - } - - /* Reset the device */ - ath79_device_reset_set(pdata->reset_bit); - msleep(100); - - ath79_device_reset_clear(pdata->reset_bit); - msleep(100); - - platform_device_register(pdev); - ath79_eth_instance++; -} - -void __init ath79_set_mac_base(unsigned char *mac) -{ - memcpy(ath79_mac_base, mac, ETH_ALEN); -} - -void __init ath79_parse_ascii_mac(char *mac_str, u8 *mac) -{ - int t; - - t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", - &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]); - - if (t != ETH_ALEN) - t = sscanf(mac_str, "%02hhx.%02hhx.%02hhx.%02hhx.%02hhx.%02hhx", - &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]); - - if (t != ETH_ALEN || !is_valid_ether_addr(mac)) { - memset(mac, 0, ETH_ALEN); - printk(KERN_DEBUG "ar71xx: invalid mac address \"%s\"\n", - mac_str); - } -} - -void __init ath79_extract_mac_reverse(u8 *ptr, u8 *out) -{ - int i; - - for (i = 0; i < ETH_ALEN; i++) { - out[i] = ptr[ETH_ALEN-i-1]; - } -} - -static void __init ath79_set_mac_base_ascii(char *str) -{ - u8 mac[ETH_ALEN]; - - ath79_parse_ascii_mac(str, mac); - ath79_set_mac_base(mac); -} - -static int __init ath79_ethaddr_setup(char *str) -{ - ath79_set_mac_base_ascii(str); - return 1; -} -__setup("ethaddr=", ath79_ethaddr_setup); - -static int __init ath79_kmac_setup(char *str) -{ - ath79_set_mac_base_ascii(str); - return 1; -} -__setup("kmac=", ath79_kmac_setup); - -void __init ath79_init_mac(unsigned char *dst, const unsigned char *src, - int offset) -{ - int t; - - if (!dst) - return; - - if (!src || !is_valid_ether_addr(src)) { - memset(dst, '\0', ETH_ALEN); - return; - } - - t = (((u32) src[3]) << 16) + (((u32) src[4]) << 8) + ((u32) src[5]); - t += offset; - - dst[0] = src[0]; - dst[1] = src[1]; - dst[2] = src[2]; - dst[3] = (t >> 16) & 0xff; - dst[4] = (t >> 8) & 0xff; - dst[5] = t & 0xff; -} - -void __init ath79_init_local_mac(unsigned char *dst, const unsigned char *src) -{ - int i; - - if (!dst) - return; - - if (!src || !is_valid_ether_addr(src)) { - memset(dst, '\0', ETH_ALEN); - return; - } - - for (i = 0; i < ETH_ALEN; i++) - dst[i] = src[i]; - dst[0] |= 0x02; -} diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h deleted file mode 100644 index 4d78260fbe..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Atheros AR71xx SoC device definitions - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_DEV_ETH_H -#define _ATH79_DEV_ETH_H - -#include <asm/mach-ath79/ag71xx_platform.h> - -struct platform_device; - -extern unsigned char ath79_mac_base[] __initdata; -void ath79_parse_ascii_mac(char *mac_str, u8 *mac); -void ath79_extract_mac_reverse(u8 *ptr, u8 *out); -void ath79_init_mac(unsigned char *dst, const unsigned char *src, - int offset); -void ath79_init_local_mac(unsigned char *dst, const unsigned char *src); - -struct ath79_eth_pll_data { - u32 pll_10; - u32 pll_100; - u32 pll_1000; -}; - -extern struct ath79_eth_pll_data ath79_eth0_pll_data; -extern struct ath79_eth_pll_data ath79_eth1_pll_data; - -extern struct ag71xx_platform_data ath79_eth0_data; -extern struct ag71xx_platform_data ath79_eth1_data; -extern struct platform_device ath79_eth0_device; -extern struct platform_device ath79_eth1_device; -void ath79_register_eth(unsigned int id); - -extern struct ag71xx_switch_platform_data ath79_switch_data; - -extern struct ag71xx_mdio_platform_data ath79_mdio0_data; -extern struct ag71xx_mdio_platform_data ath79_mdio1_data; -extern struct platform_device ath79_mdio0_device; -extern struct platform_device ath79_mdio1_device; -void ath79_register_mdio(unsigned int id, u32 phy_mask); - -void ath79_setup_ar933x_phy4_switch(bool mac, bool mdio); -void ath79_setup_ar934x_eth_cfg(u32 mask); -void ath79_setup_ar934x_eth_rx_delay(unsigned int rxd, unsigned int rxdv); -void ath79_setup_qca955x_eth_cfg(u32 mask); -void ath79_setup_qca956x_eth_cfg(u32 mask); - -#endif /* _ATH79_DEV_ETH_H */ diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.c deleted file mode 100644 index e53d97dcbf..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/concat.h> - -#include "dev-spi.h" -#include "dev-m25p80.h" - -static struct spi_board_info ath79_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - }, - { - .bus_num = 0, - .chip_select = 1, - .max_speed_hz = 25000000, - .modalias = "m25p80", - } -}; - -static struct ath79_spi_platform_data ath79_spi_data; - -void __init ath79_register_m25p80(struct flash_platform_data *pdata) -{ - ath79_spi_data.bus_num = 0; - ath79_spi_data.num_chipselect = 1; - ath79_spi_info[0].platform_data = pdata; - ath79_register_spi(&ath79_spi_data, ath79_spi_info, 1); -} - -static struct flash_platform_data *multi_pdata; - -static struct mtd_info *concat_devs[2] = { NULL, NULL }; -static struct work_struct mtd_concat_work; - -static void mtd_concat_add_work(struct work_struct *work) -{ - struct mtd_info *mtd; - - mtd = mtd_concat_create(concat_devs, ARRAY_SIZE(concat_devs), "flash"); - - mtd_device_register(mtd, multi_pdata->parts, multi_pdata->nr_parts); -} - -static void mtd_concat_add(struct mtd_info *mtd) -{ - static bool registered = false; - - if (registered) - return; - - if (!strcmp(mtd->name, "spi0.0")) - concat_devs[0] = mtd; - else if (!strcmp(mtd->name, "spi0.1")) - concat_devs[1] = mtd; - else - return; - - if (!concat_devs[0] || !concat_devs[1]) - return; - - registered = true; - INIT_WORK(&mtd_concat_work, mtd_concat_add_work); - schedule_work(&mtd_concat_work); -} - -static void mtd_concat_remove(struct mtd_info *mtd) -{ -} - -static void add_mtd_concat_notifier(void) -{ - static struct mtd_notifier not = { - .add = mtd_concat_add, - .remove = mtd_concat_remove, - }; - - register_mtd_user(¬); -} - -void __init ath79_register_m25p80_multi(struct flash_platform_data *pdata) -{ - multi_pdata = pdata; - add_mtd_concat_notifier(); - ath79_spi_data.bus_num = 0; - ath79_spi_data.num_chipselect = 2; - ath79_register_spi(&ath79_spi_data, ath79_spi_info, 2); -} diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.h b/target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.h deleted file mode 100644 index 637b41a7d8..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_DEV_M25P80_H -#define _ATH79_DEV_M25P80_H - -#include <linux/spi/flash.h> - -void ath79_register_m25p80(struct flash_platform_data *pdata) __init; -void ath79_register_m25p80_multi(struct flash_platform_data *pdata) __init; - -#endif /* _ATH79_DEV_M25P80_H */ diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.c deleted file mode 100644 index 9b5256ecc2..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Atheros AR934X SoCs built-in NAND flash controller support - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/dma-mapping.h> -#include <linux/etherdevice.h> -#include <linux/platform_device.h> -#include <linux/platform/ar934x_nfc.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "dev-nfc.h" - -static struct resource ath79_nfc_resources[2]; -static u64 ar934x_nfc_dmamask = DMA_BIT_MASK(32); -static struct ar934x_nfc_platform_data ath79_nfc_data; - -static struct platform_device ath79_nfc_device = { - .name = AR934X_NFC_DRIVER_NAME, - .id = -1, - .resource = ath79_nfc_resources, - .num_resources = ARRAY_SIZE(ath79_nfc_resources), - .dev = { - .dma_mask = &ar934x_nfc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &ath79_nfc_data, - }, -}; - -static void __init ath79_nfc_init_resource(struct resource res[2], - unsigned long base, - unsigned long size, - int irq) -{ - memset(res, 0, sizeof(struct resource) * 2); - - res[0].flags = IORESOURCE_MEM; - res[0].start = base; - res[0].end = base + size - 1; - - res[1].flags = IORESOURCE_IRQ; - res[1].start = irq; - res[1].end = irq; -} - -static void ar934x_nfc_hw_reset(bool active) -{ - if (active) { - ath79_device_reset_set(AR934X_RESET_NANDF); - udelay(100); - - ath79_device_reset_set(AR934X_RESET_ETH_SWITCH_ANALOG); - udelay(250); - } else { - ath79_device_reset_clear(AR934X_RESET_ETH_SWITCH_ANALOG); - udelay(250); - - ath79_device_reset_clear(AR934X_RESET_NANDF); - udelay(100); - } -} - -static void ar934x_nfc_setup(void) -{ - ath79_nfc_data.hw_reset = ar934x_nfc_hw_reset; - - ath79_nfc_init_resource(ath79_nfc_resources, - AR934X_NFC_BASE, AR934X_NFC_SIZE, - ATH79_MISC_IRQ(21)); - - platform_device_register(&ath79_nfc_device); -} - -static void qca955x_nfc_hw_reset(bool active) -{ - if (active) { - ath79_device_reset_set(QCA955X_RESET_NANDF); - udelay(250); - } else { - ath79_device_reset_clear(QCA955X_RESET_NANDF); - udelay(100); - } -} - -static void qca955x_nfc_setup(void) -{ - ath79_nfc_data.hw_reset = qca955x_nfc_hw_reset; - - ath79_nfc_init_resource(ath79_nfc_resources, - QCA955X_NFC_BASE, QCA955X_NFC_SIZE, - ATH79_MISC_IRQ(21)); - - platform_device_register(&ath79_nfc_device); -} - -void __init ath79_nfc_set_select_chip(void (*f)(int chip_no)) -{ - ath79_nfc_data.select_chip = f; -} - -void __init ath79_nfc_set_scan_fixup(int (*f)(struct mtd_info *mtd)) -{ - ath79_nfc_data.scan_fixup = f; -} - -void __init ath79_nfc_set_swap_dma(bool enable) -{ - ath79_nfc_data.swap_dma = enable; -} - -void __init ath79_nfc_set_ecc_mode(enum ar934x_nfc_ecc_mode mode) -{ - ath79_nfc_data.ecc_mode = mode; -} - -void __init ath79_nfc_set_parts(struct mtd_partition *parts, int nr_parts) -{ - ath79_nfc_data.parts = parts; - ath79_nfc_data.nr_parts = nr_parts; -} - -void __init ath79_register_nfc(void) -{ - if (soc_is_ar934x()) - ar934x_nfc_setup(); - else if (soc_is_qca955x()) - qca955x_nfc_setup(); - else - BUG(); -} diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.h b/target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.h deleted file mode 100644 index 3a1c88fe98..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Atheros AR934X SoCs built-in NAND Flash Controller support - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_DEV_NFC_H -#define _ATH79_DEV_NFC_H - -struct mtd_partition; -enum ar934x_nfc_ecc_mode; - -#ifdef CONFIG_ATH79_DEV_NFC -void ath79_nfc_set_parts(struct mtd_partition *parts, int nr_parts); -void ath79_nfc_set_select_chip(void (*f)(int chip_no)); -void ath79_nfc_set_scan_fixup(int (*f)(struct mtd_info *mtd)); -void ath79_nfc_set_swap_dma(bool enable); -void ath79_nfc_set_ecc_mode(enum ar934x_nfc_ecc_mode mode); -void ath79_register_nfc(void); -#else -static inline void ath79_nfc_set_parts(struct mtd_partition *parts, - int nr_parts) {} -static inline void ath79_nfc_set_select_chip(void (*f)(int chip_no)) {} -static inline void ath79_nfc_set_scan_fixup(int (*f)(struct mtd_info *mtd)) {} -static inline void ath79_nfc_set_swap_dma(bool enable) {} -static inline void ath79_nfc_set_ecc_mode(enum ar934x_nfc_ecc_mode mode) {} -static inline void ath79_register_nfc(void) {} -#endif - -#endif /* _ATH79_DEV_NFC_H */ diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-a60.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-a60.c deleted file mode 100644 index 084a4e4cc0..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-a60.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * OpenMesh A60 support - * - * Copyright (C) 2013 Marek Lindner <marek@open-mesh.com> - * Copyright (C) 2014-2017 Sven Eckelmann <sven@open-mesh.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> -#include <linux/platform_data/phy-at803x.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-gpio-buttons.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" -#include "dev-usb.h" - -#define A60_GPIO_LED_RED 22 -#define A60_GPIO_LED_GREEN 23 -#define A60_GPIO_LED_BLUE 13 - -#define A60_GPIO_BTN_RESET 17 - -#define A60_KEYS_POLL_INTERVAL 20 /* msecs */ -#define A60_KEYS_DEBOUNCE_INTERVAL (3 * A60_KEYS_POLL_INTERVAL) - -#define A60_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led a40_leds_gpio[] __initdata = { - { - .name = "a40:red:status", - .gpio = A60_GPIO_LED_RED, - }, { - .name = "a40:green:status", - .gpio = A60_GPIO_LED_GREEN, - }, { - .name = "a40:blue:status", - .gpio = A60_GPIO_LED_BLUE, - } -}; - -static struct gpio_led a60_leds_gpio[] __initdata = { - { - .name = "a60:red:status", - .gpio = A60_GPIO_LED_RED, - }, { - .name = "a60:green:status", - .gpio = A60_GPIO_LED_GREEN, - }, { - .name = "a60:blue:status", - .gpio = A60_GPIO_LED_BLUE, - } -}; - -static struct gpio_keys_button a60_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = A60_KEYS_DEBOUNCE_INTERVAL, - .gpio = A60_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct at803x_platform_data a60_at803x_data = { - .disable_smarteee = 1, - .enable_rgmii_rx_delay = 1, - .enable_rgmii_tx_delay = 1, -}; - -static struct mdio_board_info a60_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 1, - .platform_data = &a60_at803x_data, - }, - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 2, - .platform_data = &a60_at803x_data, - }, -}; - -static void __init a60_setup_qca955x_eth_cfg(u32 mask, - unsigned int rxd, - unsigned int rxdv, - unsigned int txd, - unsigned int txe) -{ - void __iomem *base; - u32 t; - - base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); - - t = mask; - t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT; - t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT; - t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT; - t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT; - - __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - -static void __init a60_setup_common(void) -{ - u8 *art = (u8 *)KSEG1ADDR(0x1fff0000); - u8 mac[6]; - - ath79_register_usb(); - - ath79_register_m25p80(NULL); - ath79_register_gpio_keys_polled(-1, A60_KEYS_POLL_INTERVAL, - ARRAY_SIZE(a60_gpio_keys), - a60_gpio_keys); - - ath79_init_mac(mac, art, 0x02); - ath79_register_wmac(art + A60_WMAC_CALDATA_OFFSET, mac); - - a60_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0); - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(a60_mdio0_info, ARRAY_SIZE(a60_mdio0_info)); - - ath79_init_mac(ath79_eth0_data.mac_addr, art, 0x00); - ath79_init_mac(ath79_eth1_data.mac_addr, art, 0x01); - - /* GMAC0 is connected to the PHY1 */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_mask = BIT(1); - ath79_eth0_pll_data.pll_1000 = 0x82000101; - ath79_eth0_pll_data.pll_100 = 0x80000101; - ath79_eth0_pll_data.pll_10 = 0x80001313; - ath79_register_eth(0); - - /* GMAC1 is connected to MDIO1 in SGMII mode */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth1_data.phy_mask = BIT(2); - ath79_eth1_pll_data.pll_1000 = 0x03000101; - ath79_eth1_pll_data.pll_100 = 0x80000101; - ath79_eth1_pll_data.pll_10 = 0x80001313; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_register_eth(1); - - ath79_register_pci(); -} - -static void __init a40_setup(void) -{ - ath79_register_leds_gpio(-1, ARRAY_SIZE(a40_leds_gpio), a40_leds_gpio); - a60_setup_common(); -} - -MIPS_MACHINE(ATH79_MACH_A40, "A40", "OpenMesh A40", a40_setup); - -static void __init a60_setup(void) -{ - ath79_register_leds_gpio(-1, ARRAY_SIZE(a60_leds_gpio), a60_leds_gpio); - a60_setup_common(); -} - -MIPS_MACHINE(ATH79_MACH_A60, "A60", "OpenMesh A60", a60_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap120c.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap120c.c deleted file mode 100644 index 032261f751..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap120c.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * ALFA Network AP120C board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2016 Luka Perkov <luka@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/bitops.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/ar8216_platform.h> -#include <linux/ath9k_platform.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-ap9x-pci.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define ALFA_AP120C_GPIO_LED 0 - -#define ALFA_AP120C_GPIO_BUTTON_WIFI 16 - -#define ALFA_AP120C_GPIO_WATCH_DOG 20 - -#define ALFA_AP120C_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ALFA_AP120C_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_AP120C_KEYS_POLL_INTERVAL) - -#define ALFA_AP120C_MAC_OFFSET 0x1002 -#define ALFA_AP120C_CAL0_OFFSET 0x1000 - -static struct gpio_keys_button alfa_ap120c_gpio_keys[] __initdata = { - { - .desc = "Wireless button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = ALFA_AP120C_KEYS_DEBOUNCE_INTERVAL, - .gpio = ALFA_AP120C_GPIO_BUTTON_WIFI, - .active_low = 1, - } -}; - -static struct gpio_led alfa_ap120c_leds_gpio[] __initdata = { - { - .name = "ap120c:red:wlan", - .gpio = ALFA_AP120C_GPIO_LED, - .active_low = 0, - } -}; - -static struct ar8327_pad_cfg ap120c_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_platform_data ap120c_ar8327_data = { - .pad0_cfg = &ap120c_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info ap120c_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &ap120c_ar8327_data, - }, -}; - -static struct flash_platform_data flash __initdata = { NULL, NULL, 0 }; - -#define ALFA_AP120C_LAN_PHYMASK BIT(5) -#define ALFA_AP120C_MDIO_PHYMASK ALFA_AP120C_LAN_PHYMASK - -static void __init alfa_ap120c_init(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 mac[ETH_ALEN]; - - struct ath9k_platform_data *pdata; - - ath79_register_leds_gpio(-1, ARRAY_SIZE(alfa_ap120c_leds_gpio), - alfa_ap120c_leds_gpio); - ath79_register_gpio_keys_polled(-1, ALFA_AP120C_KEYS_POLL_INTERVAL, - ARRAY_SIZE(alfa_ap120c_gpio_keys), - alfa_ap120c_gpio_keys); - - ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN | - AR71XX_GPIO_FUNC_SPI_CS2_EN); - - ath79_register_m25p80_multi(&flash); - - ath79_init_mac(mac, art + ALFA_AP120C_MAC_OFFSET, 1); - ath79_register_wmac(art + ALFA_AP120C_CAL0_OFFSET, mac); - - ath79_init_mac(mac, art + ALFA_AP120C_MAC_OFFSET, 2); - ap91_pci_init(NULL, mac); - pdata = ap9x_pci_get_wmac_data(0); - if (!pdata) { - pr_err("ap120c: unable to get address of wlan data\n"); - return; - } - pdata->use_eeprom = true; - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | - BIT(15) | BIT(17) | BIT(19) | BIT(21)); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + ALFA_AP120C_MAC_OFFSET, 0); - - mdiobus_register_board_info(ap120c_mdio0_info, ARRAY_SIZE(ap120c_mdio0_info)); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = ALFA_AP120C_LAN_PHYMASK; - - ath79_eth0_pll_data.pll_1000 = 0x42000000; - ath79_eth0_pll_data.pll_10 = 0x00001313; - - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_ALFA_AP120C, "ALFA-AP120C", "ALFA Network AP120C", - alfa_ap120c_init); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap96.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap96.c deleted file mode 100644 index 531e5fb18e..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap96.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * ALFA Network AP96 board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/bitops.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/mmc/host.h> -#include <linux/spi/spi.h> -#include <linux/spi/mmc_spi.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -#define ALFA_AP96_GPIO_PCIE_RESET 2 -#define ALFA_AP96_GPIO_SIM_DETECT 3 -#define ALFA_AP96_GPIO_MICROSD_CD 4 -#define ALFA_AP96_GPIO_PCIE_W_DISABLE 5 - -#define ALFA_AP96_GPIO_BUTTON_RESET 11 - -#define ALFA_AP96_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ALFA_AP96_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_AP96_KEYS_POLL_INTERVAL) - -static struct gpio_keys_button alfa_ap96_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ALFA_AP96_KEYS_DEBOUNCE_INTERVAL, - .gpio = ALFA_AP96_GPIO_BUTTON_RESET, - .active_low = 1, - } -}; - -static struct mmc_spi_platform_data alfa_ap96_mmc_data = { - .flags = MMC_SPI_USE_CD_GPIO, - .cd_gpio = ALFA_AP96_GPIO_MICROSD_CD, - .cd_debounce = 1, - .caps = MMC_CAP_NEEDS_POLL, - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, -}; - -static struct spi_board_info alfa_ap96_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - }, { - .bus_num = 0, - .chip_select = 1, - .max_speed_hz = 25000000, - .modalias = "mmc_spi", - .platform_data = &alfa_ap96_mmc_data, - }, { - .bus_num = 0, - .chip_select = 2, - .max_speed_hz = 6250000, - .modalias = "rtc-pcf2123", - }, -}; - -static struct ath79_spi_platform_data alfa_ap96_spi_data = { - .bus_num = 0, - .num_chipselect = 3, -}; - -static void __init alfa_ap96_gpio_setup(void) -{ - ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN | - AR71XX_GPIO_FUNC_SPI_CS2_EN); - - gpio_request(ALFA_AP96_GPIO_MICROSD_CD, "microSD CD"); - gpio_direction_input(ALFA_AP96_GPIO_MICROSD_CD); - gpio_request(ALFA_AP96_GPIO_PCIE_RESET, "PCIe reset"); - gpio_direction_output(ALFA_AP96_GPIO_PCIE_RESET, 1); - gpio_request(ALFA_AP96_GPIO_PCIE_W_DISABLE, "PCIe write disable"); - gpio_direction_output(ALFA_AP96_GPIO_PCIE_W_DISABLE, 1); -} - -#define ALFA_AP96_WAN_PHYMASK BIT(4) -#define ALFA_AP96_LAN_PHYMASK BIT(5) -#define ALFA_AP96_MDIO_PHYMASK (ALFA_AP96_LAN_PHYMASK | ALFA_AP96_WAN_PHYMASK) - -static void __init alfa_ap96_init(void) -{ - alfa_ap96_gpio_setup(); - - ath79_register_mdio(0, ~ALFA_AP96_MDIO_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = ALFA_AP96_WAN_PHYMASK; - ath79_eth1_pll_data.pll_1000 = 0x110000; - - ath79_register_eth(0); - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = ALFA_AP96_LAN_PHYMASK; - ath79_eth1_pll_data.pll_1000 = 0x110000; - - ath79_register_eth(1); - - ath79_register_pci(); - ath79_register_spi(&alfa_ap96_spi_data, alfa_ap96_spi_info, - ARRAY_SIZE(alfa_ap96_spi_info)); - - ath79_register_gpio_keys_polled(-1, ALFA_AP96_KEYS_POLL_INTERVAL, - ARRAY_SIZE(alfa_ap96_gpio_keys), - alfa_ap96_gpio_keys); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_ALFA_AP96, "ALFA-AP96", "ALFA Network AP96", - alfa_ap96_init); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-nx.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-nx.c deleted file mode 100644 index a515f4f540..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-nx.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * ALFA Network N2/N5 board support - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -#define ALFA_NX_GPIO_LED_2 17 -#define ALFA_NX_GPIO_LED_3 16 -#define ALFA_NX_GPIO_LED_5 12 -#define ALFA_NX_GPIO_LED_6 8 -#define ALFA_NX_GPIO_LED_7 6 -#define ALFA_NX_GPIO_LED_8 7 - -#define ALFA_NX_GPIO_BTN_RESET 11 - -#define ALFA_NX_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ALFA_NX_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_NX_KEYS_POLL_INTERVAL) - -#define ALFA_NX_MAC0_OFFSET 0 -#define ALFA_NX_MAC1_OFFSET 6 -#define ALFA_NX_CALDATA_OFFSET 0x1000 - -static struct gpio_keys_button alfa_nx_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ALFA_NX_KEYS_DEBOUNCE_INTERVAL, - .gpio = ALFA_NX_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct gpio_led alfa_nx_leds_gpio[] __initdata = { - { - .name = "alfa:green:led_2", - .gpio = ALFA_NX_GPIO_LED_2, - .active_low = 1, - }, { - .name = "alfa:green:led_3", - .gpio = ALFA_NX_GPIO_LED_3, - .active_low = 1, - }, { - .name = "alfa:red:led_5", - .gpio = ALFA_NX_GPIO_LED_5, - .active_low = 1, - }, { - .name = "alfa:amber:led_6", - .gpio = ALFA_NX_GPIO_LED_6, - .active_low = 1, - }, { - .name = "alfa:green:led_7", - .gpio = ALFA_NX_GPIO_LED_7, - .active_low = 1, - }, { - .name = "alfa:green:led_8", - .gpio = ALFA_NX_GPIO_LED_8, - .active_low = 1, - } -}; - -static void __init alfa_nx_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE, - AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(0, ARRAY_SIZE(alfa_nx_leds_gpio), - alfa_nx_leds_gpio); - - ath79_register_gpio_keys_polled(-1, ALFA_NX_KEYS_POLL_INTERVAL, - ARRAY_SIZE(alfa_nx_gpio_keys), - alfa_nx_gpio_keys); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, - art + ALFA_NX_MAC0_OFFSET, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, - art + ALFA_NX_MAC1_OFFSET, 0); - - /* WAN port */ - ath79_register_eth(0); - /* LAN port */ - ath79_register_eth(1); - - ap91_pci_init(art + ALFA_NX_CALDATA_OFFSET, NULL); -} - -MIPS_MACHINE(ATH79_MACH_ALFA_NX, "ALFA-NX", "ALFA Network N2/N5", - alfa_nx_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-all0258n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-all0258n.c deleted file mode 100644 index 2495bcba79..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-all0258n.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Allnet ALL0258N support - * - * Copyright (C) 2011 Daniel Golle <dgolle@allnet.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -/* found via /sys/gpio/... try and error */ -#define ALL0258N_GPIO_BTN_RESET 1 -#define ALL0258N_GPIO_LED_RSSIHIGH 13 -#define ALL0258N_GPIO_LED_RSSIMEDIUM 15 -#define ALL0258N_GPIO_LED_RSSILOW 14 - -/* defaults taken from others machs */ -#define ALL0258N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ALL0258N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0258N_KEYS_POLL_INTERVAL) - -/* showed up in the original firmware's bootlog */ -#define ALL0258N_SEC_PHYMASK BIT(3) - -static struct gpio_led all0258n_leds_gpio[] __initdata = { - { - .name = "all0258n:green:rssihigh", - .gpio = ALL0258N_GPIO_LED_RSSIHIGH, - .active_low = 1, - }, { - .name = "all0258n:yellow:rssimedium", - .gpio = ALL0258N_GPIO_LED_RSSIMEDIUM, - .active_low = 1, - }, { - .name = "all0258n:red:rssilow", - .gpio = ALL0258N_GPIO_LED_RSSILOW, - .active_low = 1, - } -}; - -static struct gpio_keys_button all0258n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ALL0258N_KEYS_DEBOUNCE_INTERVAL, - .gpio = ALL0258N_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init all0258n_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f7f0000); - u8 *ee = (u8 *) KSEG1ADDR(0x1f7f1000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(all0258n_leds_gpio), - all0258n_leds_gpio); - - ath79_register_gpio_keys_polled(-1, ALL0258N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(all0258n_gpio_keys), - all0258n_gpio_keys); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - - ath79_eth1_data.phy_mask = ALL0258N_SEC_PHYMASK; - - ath79_register_mdio(0, 0x0); - - ath79_register_eth(0); - ath79_register_eth(1); - - ap91_pci_init(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_ALL0258N, "ALL0258N", "Allnet ALL0258N", - all0258n_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-all0315n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-all0315n.c deleted file mode 100644 index 387ee7f9ea..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-all0315n.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Allnet ALL0315N support - * - * Copyright (C) 2012 Daniel Golle <dgolle@allnet.de> - * - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-m25p80.h" -#include "dev-leds-gpio.h" -#include "machtypes.h" -#include "pci.h" - -#define ALL0315N_GPIO_BTN_RESET 0 -#define ALL0315N_GPIO_LED_RSSIHIGH 14 -#define ALL0315N_GPIO_LED_RSSIMEDIUM 15 -#define ALL0315N_GPIO_LED_RSSILOW 16 - -#define ALL0315N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ALL0315N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0315N_KEYS_POLL_INTERVAL) - -static struct gpio_led all0315n_leds_gpio[] __initdata = { - { - .name = "all0315n:green:rssihigh", - .gpio = ALL0315N_GPIO_LED_RSSIHIGH, - .active_low = 1, - }, { - .name = "all0315n:yellow:rssimedium", - .gpio = ALL0315N_GPIO_LED_RSSIMEDIUM, - .active_low = 1, - }, { - .name = "all0315n:red:rssilow", - .gpio = ALL0315N_GPIO_LED_RSSILOW, - .active_low = 1, - } -}; - -static struct gpio_keys_button all0315n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ALL0315N_KEYS_DEBOUNCE_INTERVAL, - .gpio = ALL0315N_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init all0315n_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1ffc0000); - u8 *ee = (u8 *) KSEG1ADDR(0x1ffc1000); - - ath79_register_m25p80(NULL); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(all0315n_leds_gpio), - all0315n_leds_gpio); - - ath79_register_gpio_keys_polled(-1, ALL0315N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(all0315n_gpio_keys), - all0315n_gpio_keys); - - ap9x_pci_setup_wmac_led_pin(0, 1); - ap91_pci_init(ee, NULL); -} - -MIPS_MACHINE(ATH79_MACH_ALL0315N, "ALL0315N", "Allnet ALL0315N", - all0315n_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s1.c deleted file mode 100644 index 0a81227b51..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s1.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - * Bitmain Antminer S1 board support - * - * Copyright (C) 2015 L. D. Pinney <ldpinney@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "dev-usb.h" - -#define ANTMINER_S1_GPIO_BTN_RESET 11 - -#define ANTMINER_S1_GPIO_LED_SYSTEM 23 -#define ANTMINER_S1_GPIO_LED_WLAN 0 -#define ANTMINER_S1_GPIO_USB_POWER 26 - -#define ANTMINER_S1_KEYSPOLL_INTERVAL 20 /* msecs */ -#define ANTMINER_S1_KEYSDEBOUNCE_INTERVAL (3 * ANTMINER_S1_KEYSPOLL_INTERVAL) - -static const char *ANTMINER_S1_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data ANTMINER_S1_flash_data = { - .part_probes = ANTMINER_S1_part_probes, -}; - -static struct gpio_led ANTMINER_S1_leds_gpio[] __initdata = { - { - .name = "antminer-s1:green:system", - .gpio = ANTMINER_S1_GPIO_LED_SYSTEM, - .active_low = 0, - },{ - .name = "antminer-s1:green:wlan", - .gpio = ANTMINER_S1_GPIO_LED_WLAN, - .active_low = 0, - }, -}; - -static struct gpio_keys_button ANTMINER_S1_GPIO_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ANTMINER_S1_KEYSDEBOUNCE_INTERVAL, - .gpio = ANTMINER_S1_GPIO_BTN_RESET, - .active_low = 0, - }, -}; - -static void __init antminer_s1_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ANTMINER_S1_leds_gpio), - ANTMINER_S1_leds_gpio); - - ath79_register_gpio_keys_polled(-1, ANTMINER_S1_KEYSPOLL_INTERVAL, - ARRAY_SIZE(ANTMINER_S1_GPIO_keys), - ANTMINER_S1_GPIO_keys); - - gpio_request_one(ANTMINER_S1_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); - - ath79_register_m25p80(&ANTMINER_S1_flash_data); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_ANTMINER_S1, "ANTMINER-S1", - "Antminer-S1", antminer_s1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s3.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s3.c deleted file mode 100644 index b77a6ccc4e..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s3.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Bitmain Antminer S3 board support - * - * Copyright (C) 2015 L. D. Pinney <ldpinney@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "dev-usb.h" - -#define ANTMINER_S3_GPIO_LED_WLAN 0 -#define ANTMINER_S3_GPIO_LED_SYSTEM 17 -#define ANTMINER_S3_GPIO_LED_LAN 22 -#define ANTMINER_S3_GPIO_USB_POWER 26 - -#define ANTMINER_S3_GPIO_BTN_RESET 11 - -#define ANTMINER_S3_KEYSPOLL_INTERVAL 88 /* msecs */ -#define ANTMINER_S3_KEYSDEBOUNCE_INTERVAL (3 * ANTMINER_S3_KEYSPOLL_INTERVAL) - -static const char *ANTMINER_S3_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data ANTMINER_S3_flash_data = { - .part_probes = ANTMINER_S3_part_probes, -}; - -static struct gpio_led ANTMINER_S3_leds_gpio[] __initdata = { - { - .name = "antminer-s3:green:wlan", - .gpio = ANTMINER_S3_GPIO_LED_WLAN, - .active_low = 0, - },{ - .name = "antminer-s3:green:system", - .gpio = ANTMINER_S3_GPIO_LED_SYSTEM, - .active_low = 0, - },{ - .name = "antminer-s3:yellow:lan", - .gpio = ANTMINER_S3_GPIO_LED_LAN, - .active_low = 0, - }, -}; - -static struct gpio_keys_button ANTMINER_S3_GPIO_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ANTMINER_S3_KEYSDEBOUNCE_INTERVAL, - .gpio = ANTMINER_S3_GPIO_BTN_RESET, - .active_low = 0, - }, -}; - -static void __init antminer_s3_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ANTMINER_S3_leds_gpio), - ANTMINER_S3_leds_gpio); - - ath79_register_gpio_keys_polled(-1, ANTMINER_S3_KEYSPOLL_INTERVAL, - ARRAY_SIZE(ANTMINER_S3_GPIO_keys), - ANTMINER_S3_GPIO_keys); - - gpio_request_one(ANTMINER_S3_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); - - ath79_register_m25p80(&ANTMINER_S3_flash_data); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_ANTMINER_S3, "ANTMINER-S3", - "Antminer-S3", antminer_s3_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-antrouter-r1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-antrouter-r1.c deleted file mode 100644 index a8f7b5d687..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-antrouter-r1.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - * Bitmain Antrouter R1 board support - * - * Copyright (C) 2015 L. D. Pinney <ldpinney@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "dev-usb.h" - -#define ANTROUTER_R1_GPIO_BTN_RESET 11 - -#define ANTROUTER_R1_GPIO_LED_WLAN 0 -#define ANTROUTER_R1_GPIO_LED_BTC 22 -#define ANTROUTER_R1_GPIO_USB_POWER 18 - -#define ANTROUTER_R1_KEYSPOLL_INTERVAL 44 /* msecs */ -#define ANTROUTER_R1_KEYSDEBOUNCE_INTERVAL (4 * ANTROUTER_R1_KEYSPOLL_INTERVAL) - -static const char *ANTROUTER_R1_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data ANTROUTER_R1_flash_data = { - .part_probes = ANTROUTER_R1_part_probes, -}; - -static struct gpio_led ANTROUTER_R1_leds_gpio[] __initdata = { - { - .name = "antrouter-r1:green:wlan", - .gpio = ANTROUTER_R1_GPIO_LED_WLAN, - .active_low = 0, - },{ - .name = "antrouter-r1:green:system", - .gpio = ANTROUTER_R1_GPIO_LED_BTC, - .active_low = 0, - }, -}; - -static struct gpio_keys_button ANTROUTER_R1_GPIO_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ANTROUTER_R1_KEYSDEBOUNCE_INTERVAL, - .gpio = ANTROUTER_R1_GPIO_BTN_RESET, - .active_low = 0, - }, -}; - -static void __init antrouter_r1_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ANTROUTER_R1_leds_gpio), - ANTROUTER_R1_leds_gpio); - - ath79_register_gpio_keys_polled(-1, ANTROUTER_R1_KEYSPOLL_INTERVAL, - ARRAY_SIZE(ANTROUTER_R1_GPIO_keys), - ANTROUTER_R1_GPIO_keys); - - gpio_request_one(ANTROUTER_R1_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); - - ath79_register_m25p80(&ANTROUTER_R1_flash_data); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_ANTROUTER_R1, "ANTROUTER-R1", - "Antrouter-R1", antrouter_r1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap121f.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap121f.c deleted file mode 100644 index 955b7faf63..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap121f.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * ALFA Network AP121F board support - * - * Copyright (C) 2017 Piotr Dymacz <pepe2k@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define AP121F_GPIO_LED_LAN 17 -#define AP121F_GPIO_LED_VPN 27 -#define AP121F_GPIO_LED_WLAN 0 - -#define AP121F_GPIO_MICROSD_EN 26 - -#define AP121F_GPIO_BTN_RESET 12 -#define AP121F_GPIO_BTN_SWITCH 21 - -#define AP121F_KEYS_POLL_INTERVAL 20 -#define AP121F_KEYS_DEBOUNCE_INTERVAL (3 * AP121F_KEYS_POLL_INTERVAL) - -#define AP121F_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led ap121f_leds_gpio[] __initdata = { - { - .name = "ap121f:green:lan", - .gpio = AP121F_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "ap121f:green:vpn", - .gpio = AP121F_GPIO_LED_VPN, - .active_low = 1, - }, { - .name = "ap121f:green:wlan", - .gpio = AP121F_GPIO_LED_WLAN, - .active_low = 0, - }, -}; - -static struct gpio_keys_button ap121f_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = AP121F_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP121F_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "switch", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = AP121F_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP121F_GPIO_BTN_SWITCH, - .active_low = 0, - }, -}; - -static void __init ap121f_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1f040000); - - ath79_register_m25p80(NULL); - - ath79_setup_ar933x_phy4_switch(false, false); - - /* LAN */ - ath79_register_mdio(0, 0x0); - ath79_init_mac(ath79_eth0_data.mac_addr, art, 0); - ath79_register_eth(0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121f_leds_gpio), - ap121f_leds_gpio); - - ath79_register_gpio_keys_polled(-1, AP121F_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap121f_gpio_keys), - ap121f_gpio_keys); - - gpio_request_one(AP121F_GPIO_MICROSD_EN, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "microSD enable"); - - ath79_register_wmac(art + AP121F_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_AP121F, "AP121F", "ALFA Network AP121F", ap121f_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap132.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap132.c deleted file mode 100644 index 2ebac057a7..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap132.c +++ /dev/null @@ -1,189 +0,0 @@ -/* - * Atheros AP132 reference board support - * - * Copyright (c) 2012 Qualcomm Atheros - * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2013 Embedded Wireless GmbH <info@embeddedwireless.de> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define AP132_GPIO_LED_USB 4 -#define AP132_GPIO_LED_WLAN_5G 12 -#define AP132_GPIO_LED_WLAN_2G 13 -#define AP132_GPIO_LED_STATUS_RED 14 -#define AP132_GPIO_LED_WPS_RED 15 - -#define AP132_GPIO_BTN_WPS 16 - -#define AP132_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AP132_KEYS_DEBOUNCE_INTERVAL (3 * AP132_KEYS_POLL_INTERVAL) - -#define AP132_MAC0_OFFSET 0 -#define AP132_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led ap132_leds_gpio[] __initdata = { - { - .name = "ap132:red:status", - .gpio = AP132_GPIO_LED_STATUS_RED, - .active_low = 1, - }, - { - .name = "ap132:red:wps", - .gpio = AP132_GPIO_LED_WPS_RED, - .active_low = 1, - }, - { - .name = "ap132:red:wlan-2g", - .gpio = AP132_GPIO_LED_WLAN_2G, - .active_low = 1, - }, - { - .name = "ap132:red:usb", - .gpio = AP132_GPIO_LED_USB, - .active_low = 1, - } -}; - -static struct gpio_keys_button ap132_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AP132_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP132_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg ap132_ar8327_pad0_cfg; - -static struct ar8327_platform_data ap132_ar8327_data = { - .pad0_cfg = &ap132_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info ap132_mdio1_info[] = { - { - .bus_id = "ag71xx-mdio.1", - .mdio_addr = 0, - .platform_data = &ap132_ar8327_data, - }, -}; - -static void __init ap132_mdio_setup(void) -{ - void __iomem *base; - u32 t; - -#define GPIO_IN_ENABLE3_ADDRESS 0x0050 -#define GPIO_IN_ENABLE3_MII_GE1_MDI_MASK 0x00ff0000 -#define GPIO_IN_ENABLE3_MII_GE1_MDI_LSB 16 -#define GPIO_IN_ENABLE3_MII_GE1_MDI_SET(x) (((x) << GPIO_IN_ENABLE3_MII_GE1_MDI_LSB) & GPIO_IN_ENABLE3_MII_GE1_MDI_MASK) -#define GPIO_OUT_FUNCTION4_ADDRESS 0x003c -#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK 0xff000000 -#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_LSB 24 -#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_SET(x) (((x) << GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_LSB) & GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK) -#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK 0x0000ff00 -#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_LSB 8 -#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_SET(x) (((x) << GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_LSB) & GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK) - - base = ioremap(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE); - - t = __raw_readl(base + GPIO_IN_ENABLE3_ADDRESS); - t &= ~GPIO_IN_ENABLE3_MII_GE1_MDI_MASK; - t |= GPIO_IN_ENABLE3_MII_GE1_MDI_SET(19); - __raw_writel(t, base + GPIO_IN_ENABLE3_ADDRESS); - - - __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << 19), base + AR71XX_GPIO_REG_OE); - - __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << 17), base + AR71XX_GPIO_REG_OE); - - - t = __raw_readl(base + GPIO_OUT_FUNCTION4_ADDRESS); - t &= ~(GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK | GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK); - t |= GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_SET(0x20) | GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_SET(0x21); - __raw_writel(t, base + GPIO_OUT_FUNCTION4_ADDRESS); - - iounmap(base); - -} - -static void __init ap132_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap132_leds_gpio), - ap132_leds_gpio); - ath79_register_gpio_keys_polled(-1, AP132_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap132_gpio_keys), - ap132_gpio_keys); - - ath79_register_usb(); - - ath79_register_wmac(art + AP132_WMAC_CALDATA_OFFSET, NULL); - - /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */ - ap132_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII; - ap132_ar8327_pad0_cfg.sgmii_delay_en = true; - - ath79_eth1_pll_data.pll_1000 = 0x03000101; - - ap132_mdio_setup(); - - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth1_data.mac_addr, art + AP132_MAC0_OFFSET, 0); - - mdiobus_register_board_info(ap132_mdio1_info, - ARRAY_SIZE(ap132_mdio1_info)); - - /* GMAC1 is connected to the SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.phy_mask = BIT(0); - ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev; - - ath79_register_eth(1); -} - -MIPS_MACHINE(ATH79_MACH_AP132, "AP132", - "Atheros AP132 reference board", - ap132_setup); - diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap143.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap143.c deleted file mode 100644 index 098420b92f..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap143.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * Atheros AP143 reference board support - * - * Copyright (c) 2013-2015 The Linux Foundation. All rights reserved. - * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define AP143_GPIO_LED_WLAN 12 -#define AP143_GPIO_LED_WPS 13 -#define AP143_GPIO_LED_STATUS 13 - -#define AP143_GPIO_LED_WAN 4 -#define AP143_GPIO_LED_LAN1 16 -#define AP143_GPIO_LED_LAN2 15 -#define AP143_GPIO_LED_LAN3 14 -#define AP143_GPIO_LED_LAN4 11 - -#define AP143_GPIO_BTN_WPS 17 - -#define AP143_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AP143_KEYS_DEBOUNCE_INTERVAL (3 * AP143_KEYS_POLL_INTERVAL) - -#define AP143_MAC0_OFFSET 0 -#define AP143_MAC1_OFFSET 6 -#define AP143_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led ap143_leds_gpio[] __initdata = { - { - .name = "ap143:green:status", - .gpio = AP143_GPIO_LED_STATUS, - .active_low = 1, - }, - { - .name = "ap143:green:wlan", - .gpio = AP143_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button ap143_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AP143_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP143_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - -static void __init ap143_gpio_led_setup(void) -{ - ath79_gpio_direction_select(AP143_GPIO_LED_WAN, true); - ath79_gpio_direction_select(AP143_GPIO_LED_LAN1, true); - ath79_gpio_direction_select(AP143_GPIO_LED_LAN2, true); - ath79_gpio_direction_select(AP143_GPIO_LED_LAN3, true); - ath79_gpio_direction_select(AP143_GPIO_LED_LAN4, true); - - ath79_gpio_output_select(AP143_GPIO_LED_WAN, - QCA953X_GPIO_OUT_MUX_LED_LINK5); - ath79_gpio_output_select(AP143_GPIO_LED_LAN1, - QCA953X_GPIO_OUT_MUX_LED_LINK1); - ath79_gpio_output_select(AP143_GPIO_LED_LAN2, - QCA953X_GPIO_OUT_MUX_LED_LINK2); - ath79_gpio_output_select(AP143_GPIO_LED_LAN3, - QCA953X_GPIO_OUT_MUX_LED_LINK3); - ath79_gpio_output_select(AP143_GPIO_LED_LAN4, - QCA953X_GPIO_OUT_MUX_LED_LINK4); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap143_leds_gpio), - ap143_leds_gpio); - ath79_register_gpio_keys_polled(-1, AP143_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap143_gpio_keys), - ap143_gpio_keys); -} - -static void __init ap143_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ap143_gpio_led_setup(); - - ath79_register_usb(); - - ath79_wmac_set_led_pin(AP143_GPIO_LED_WLAN); - ath79_register_wmac(art + AP143_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_mdio(0, 0x0); - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + AP143_MAC0_OFFSET, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, art + AP143_MAC1_OFFSET, 0); - - /* WAN port */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(4); - ath79_register_eth(0); - - /* LAN ports */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_switch_data.phy_poll_mask |= BIT(4); - ath79_switch_data.phy4_mii_en = 1; - ath79_register_eth(1); -} - -MIPS_MACHINE(ATH79_MACH_AP143, "AP143", "Qualcomm Atheros AP143 reference board", - ap143_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap147.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap147.c deleted file mode 100644 index 7b45da4711..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap147.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Atheros AP147 reference board support - * - * Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net> - * Copyright (C) 2015 Sven Eckelmann <sven@open-mesh.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define AP147_GPIO_LED_WAN 4 -#define AP147_GPIO_LED_LAN1 16 -#define AP147_GPIO_LED_LAN2 15 -#define AP147_GPIO_LED_LAN3 14 -#define AP147_GPIO_LED_LAN4 11 -#define AP147_GPIO_LED_STATUS 13 -#define AP147_GPIO_LED_WLAN_2G 12 - -#define AP147_GPIO_BTN_WPS 17 - -#define AP147_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AP147_KEYS_DEBOUNCE_INTERVAL (3 * AP147_KEYS_POLL_INTERVAL) - -#define AP147_MAC0_OFFSET 0x1000 - -static struct gpio_led ap147_leds_gpio[] __initdata = { - { - .name = "ap147:green:status", - .gpio = AP147_GPIO_LED_STATUS, - .active_low = 1, - }, { - .name = "ap147:green:wlan-2g", - .gpio = AP147_GPIO_LED_WLAN_2G, - .active_low = 1, - }, { - .name = "ap147:green:lan1", - .gpio = AP147_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "ap147:green:lan2", - .gpio = AP147_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "ap147:green:lan3", - .gpio = AP147_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "ap147:green:lan4", - .gpio = AP147_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "ap147:green:wan", - .gpio = AP147_GPIO_LED_WAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button ap147_gpio_keys[] __initdata = { - { - .desc = "wps button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AP147_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP147_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static void __init ap147_setup(void) -{ - u8 *art = (u8 *)KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap147_leds_gpio), - ap147_leds_gpio); - ath79_register_gpio_keys_polled(-1, AP147_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap147_gpio_keys), - ap147_gpio_keys); - - ath79_register_usb(); - - ath79_register_pci(); - - ath79_register_wmac(art + AP147_MAC0_OFFSET, NULL); - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_mdio(0, 0x0); - - /* LAN */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_switch_data.phy_poll_mask |= BIT(4); - ath79_init_mac(ath79_eth1_data.mac_addr, art, 0); - ath79_register_eth(1); - - /* WAN */ - ath79_switch_data.phy4_mii_en = 1; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.phy_mask = BIT(4); - ath79_init_mac(ath79_eth0_data.mac_addr, art, 1); - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_AP147_010, "AP147-010", "Atheros AP147-010 reference board", ap147_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c deleted file mode 100644 index 277a934a18..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c +++ /dev/null @@ -1,140 +0,0 @@ - -/* - * Qualcomm Atheros AP152 reference board support - * - * Copyright (c) 2015 Qualcomm Atheros - * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-m25p80.h" -#include "machtypes.h" -#include "pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" - -#define AP152_GPIO_LED_USB0 7 -#define AP152_GPIO_LED_USB1 8 - -#define AP152_GPIO_BTN_RESET 2 -#define AP152_GPIO_BTN_WPS 1 -#define AP152_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AP152_KEYS_DEBOUNCE_INTERVAL (3 * AP152_KEYS_POLL_INTERVAL) - -#define AP152_MAC0_OFFSET 0 -#define AP152_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led ap152_leds_gpio[] __initdata = { - { - .name = "ap152:green:usb0", - .gpio = AP152_GPIO_LED_USB0, - .active_low = 1, - }, - { - .name = "ap152:green:usb1", - .gpio = AP152_GPIO_LED_USB1, - .active_low = 1, - }, -}; - -static struct gpio_keys_button ap152_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AP152_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP152_GPIO_BTN_WPS, - .active_low = 1, - }, - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = AP152_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP152_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg ap152_ar8337_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -static struct ar8327_platform_data ap152_ar8337_data = { - .pad0_cfg = &ap152_ar8337_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info ap152_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &ap152_ar8337_data, - }, -}; - -static void __init ap152_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap152_leds_gpio), - ap152_leds_gpio); - ath79_register_gpio_keys_polled(-1, AP152_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap152_gpio_keys), - ap152_gpio_keys); - - ath79_register_usb(); - - platform_device_register(&ath79_mdio0_device); - - mdiobus_register_board_info(ap152_mdio0_info, - ARRAY_SIZE(ap152_mdio0_info)); - - ath79_register_wmac(art + AP152_WMAC_CALDATA_OFFSET, NULL); - ath79_register_pci(); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + AP152_MAC0_OFFSET, 0); - - /* GMAC0 is connected to an AR8337 switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_AP152, "AP152", "Qualcomm Atheros AP152 reference board", - ap152_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap531b0.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap531b0.c deleted file mode 100644 index 3cb2697955..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap531b0.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * Rockeetech AP531B0 11ng wireless AP board support - * - * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2016 Shuanglin Liu <roboidler@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" -#include "dev-ap9x-pci.h" - -#define AP531B0_GPIO_LED_WLAN 12 -#define AP531B0_GPIO_LED_STATUS 11 - -#define AP531B0_GPIO_RST_BTN 17 - -#define AP531B0_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AP531B0_KEYS_DEBOUNCE_INTERVAL (3 * AP531B0_KEYS_POLL_INTERVAL) - -#define AP531B0_WMAC_CALDATA_OFFSET 0x1000 - - -static struct gpio_led ap531b0_leds_gpio[] __initdata = { - { - .name = "ap531b0:green:status", - .gpio = AP531B0_GPIO_LED_STATUS, - .active_low = 1, - }, - { - .name = "ap531b0:green:wlan", - .gpio = AP531B0_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button ap531b0_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = AP531B0_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP531B0_GPIO_RST_BTN, - .active_low = 1, - }, -}; - - -static void __init ap531b0_gpio_led_setup(void) -{ - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap531b0_leds_gpio), - ap531b0_leds_gpio); - - ath79_register_gpio_keys_polled(-1, AP531B0_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap531b0_gpio_keys), - ap531b0_gpio_keys); -} - -static void __init ap531b0_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *pmac; - - ath79_register_m25p80(NULL); - ap531b0_gpio_led_setup(); - ath79_register_usb(); - ath79_register_pci(); - - ath79_register_mdio(0, 0x0); - - pmac = art + AP531B0_WMAC_CALDATA_OFFSET + 2; - ath79_init_mac(ath79_eth0_data.mac_addr, pmac, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, pmac, 2); - - ath79_register_wmac(art + AP531B0_WMAC_CALDATA_OFFSET, pmac); - - /* WAN port */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(4); - ath79_register_eth(0); - - /* LAN ports */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_switch_data.phy_poll_mask |= BIT(4); - ath79_switch_data.phy4_mii_en = 1; - ath79_register_eth(1); -} - -MIPS_MACHINE(ATH79_MACH_AP531B0, "AP531B0", "Rockeetech AP531B0", - ap531b0_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c deleted file mode 100644 index 99fceca3a0..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * Support for YunCore boards: - * - AP80Q/AP90Q - * - CPE830 - * - * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -/* AP90Q */ -#define AP90Q_GPIO_LED_WAN 4 -#define AP90Q_GPIO_LED_WLAN 12 -#define AP90Q_GPIO_LED_LAN 16 - -#define AP90Q_GPIO_BTN_RESET 17 - -#define AP90Q_KEYS_POLL_INTERVAL 20 -#define AP90Q_KEYS_DEBOUNCE_INTERVAL (3 * AP90Q_KEYS_POLL_INTERVAL) - -static struct gpio_led ap90q_leds_gpio[] __initdata = { - { - .name = "ap90q:green:lan", - .gpio = AP90Q_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "ap90q:green:wan", - .gpio = AP90Q_GPIO_LED_WAN, - .active_low = 1, - }, - { - .name = "ap90q:green:wlan", - .gpio = AP90Q_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button ap90q_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = AP90Q_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP90Q_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -/* CPE830 */ -#define CPE830_GPIO_LED_LINK4 0 -#define CPE830_GPIO_LED_LINK1 1 -#define CPE830_GPIO_LED_LINK2 2 -#define CPE830_GPIO_LED_LINK3 3 -#define CPE830_GPIO_LED_WAN 4 -#define CPE830_GPIO_LED_WLAN 12 -#define CPE830_GPIO_LED_LAN 16 - -#define CPE830_GPIO_BTN_RESET 17 - -static struct gpio_led cpe830_leds_gpio[] __initdata = { - { - .name = "cpe830:green:lan", - .gpio = CPE830_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "cpe830:green:wan", - .gpio = CPE830_GPIO_LED_WAN, - .active_low = 1, - }, - { - .name = "cpe830:green:wlan", - .gpio = CPE830_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "cpe830:green:link1", - .gpio = CPE830_GPIO_LED_LINK1, - .active_low = 1, - }, - { - .name = "cpe830:green:link2", - .gpio = CPE830_GPIO_LED_LINK2, - .active_low = 1, - }, - { - .name = "cpe830:green:link3", - .gpio = CPE830_GPIO_LED_LINK3, - .active_low = 1, - }, - { - .name = "cpe830:green:link4", - .gpio = CPE830_GPIO_LED_LINK4, - .active_low = 1, - }, -}; - -static void __init ap90q_cpe830_common_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff1000); - u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_mdio(0, 0x0); - - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask |= BIT(4); - - /* LAN */ - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - ath79_register_eth(1); - - /* WAN */ - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.phy_mask = BIT(4); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_register_eth(0); - - ath79_register_wmac(art, NULL); - - /* For LED on GPIO4 */ - ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN); - - ath79_gpio_direction_select(AP90Q_GPIO_LED_LAN, true); - ath79_gpio_direction_select(AP90Q_GPIO_LED_WAN, true); - ath79_gpio_direction_select(AP90Q_GPIO_LED_WLAN, true); - - /* Mute LEDs on boot */ - gpio_set_value(AP90Q_GPIO_LED_LAN, 1); - gpio_set_value(AP90Q_GPIO_LED_WAN, 1); - - ath79_gpio_output_select(AP90Q_GPIO_LED_LAN, 0); - ath79_gpio_output_select(AP90Q_GPIO_LED_WAN, 0); - ath79_gpio_output_select(AP90Q_GPIO_LED_WLAN, 0); - - ath79_register_gpio_keys_polled(-1, AP90Q_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap90q_gpio_keys), - ap90q_gpio_keys); -} - -static void __init ap90q_setup(void) -{ - ap90q_cpe830_common_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap90q_leds_gpio), - ap90q_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_AP90Q, "AP90Q", "YunCore AP80Q/AP90Q", ap90q_setup); - -static void __init cpe830_setup(void) -{ - ap90q_cpe830_common_setup(); - - ath79_gpio_direction_select(CPE830_GPIO_LED_LINK1, true); - ath79_gpio_direction_select(CPE830_GPIO_LED_LINK2, true); - ath79_gpio_direction_select(CPE830_GPIO_LED_LINK3, true); - ath79_gpio_direction_select(CPE830_GPIO_LED_LINK4, true); - - /* Mute LEDs on boot */ - gpio_set_value(CPE830_GPIO_LED_LINK1, 1); - gpio_set_value(CPE830_GPIO_LED_LINK2, 1); - gpio_set_value(CPE830_GPIO_LED_LINK3, 1); - gpio_set_value(CPE830_GPIO_LED_LINK4, 1); - - ath79_gpio_output_select(CPE830_GPIO_LED_LINK1, 0); - ath79_gpio_output_select(CPE830_GPIO_LED_LINK2, 0); - ath79_gpio_output_select(CPE830_GPIO_LED_LINK3, 0); - ath79_gpio_output_select(CPE830_GPIO_LED_LINK4, 0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe830_leds_gpio), - cpe830_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_CPE830, "CPE830", "YunCore CPE830", cpe830_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap91-5g.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap91-5g.c deleted file mode 100644 index 64b9430381..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap91-5g.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * ALFA Network AP91-5G board support - * - * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -#define AP91_5G_GPIO_LED_LAN 17 -#define AP91_5G_GPIO_LED_SIGNAL1 12 -#define AP91_5G_GPIO_LED_SIGNAL2 8 -#define AP91_5G_GPIO_LED_SIGNAL3 6 -#define AP91_5G_GPIO_LED_SIGNAL4 7 - -#define AP91_5G_GPIO_WDT_EN 1 -#define AP91_5G_GPIO_WDT_IN 0 - -#define AP91_5G_GPIO_BTN_RESET 11 - -#define AP91_5G_KEYS_POLL_INTERVAL 20 -#define AP91_5G_KEYS_DEBOUNCE_INTERVAL (3 * AP91_5G_KEYS_POLL_INTERVAL) - -#define AP91_5G_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led ap91_5g_leds_gpio[] __initdata = { - { - .name = "ap91-5g:green:lan", - .gpio = AP91_5G_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "ap91-5g:red:signal1", - .gpio = AP91_5G_GPIO_LED_SIGNAL1, - .active_low = 1, - }, { - .name = "ap91-5g:orange:signal2", - .gpio = AP91_5G_GPIO_LED_SIGNAL2, - .active_low = 1, - }, { - .name = "ap91-5g:green:signal3", - .gpio = AP91_5G_GPIO_LED_SIGNAL3, - .active_low = 1, - }, { - .name = "ap91-5g:green:signal4", - .gpio = AP91_5G_GPIO_LED_SIGNAL4, - .active_low = 1, - }, -}; - -static struct gpio_keys_button ap91_5g_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = AP91_5G_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP91_5G_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static void __init ap91_5g_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE, - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - gpio_set_value(AP91_5G_GPIO_LED_LAN, 1); - gpio_set_value(AP91_5G_GPIO_LED_SIGNAL3, 1); - gpio_set_value(AP91_5G_GPIO_LED_SIGNAL4, 1); - - ath79_register_m25p80(NULL); - - ath79_register_mdio(0, 0x0); - - /* LAN */ - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.speed = SPEED_100; - ath79_init_mac(ath79_eth0_data.mac_addr, art, 0); - ath79_register_eth(0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap91_5g_leds_gpio), - ap91_5g_leds_gpio); - - ath79_register_gpio_keys_polled(-1, AP91_5G_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap91_5g_gpio_keys), - ap91_5g_gpio_keys); - - gpio_request_one(AP91_5G_GPIO_WDT_IN, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "WDT input"); - - gpio_request_one(AP91_5G_GPIO_WDT_EN, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "WDT enable"); - - ap91_pci_init(art + AP91_5G_WMAC_CALDATA_OFFSET, NULL); -} - -MIPS_MACHINE(ATH79_MACH_AP91_5G, "AP91-5G", "ALFA Network AP91-5G", - ap91_5g_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap96.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap96.c deleted file mode 100644 index 35120d3e2e..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap96.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * Atheros AP96 board support - * - * Copyright (C) 2009 Marco Porsch - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2010 Atheros Communications - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/delay.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define AP96_GPIO_LED_12_GREEN 0 -#define AP96_GPIO_LED_3_GREEN 1 -#define AP96_GPIO_LED_2_GREEN 2 -#define AP96_GPIO_LED_WPS_GREEN 4 -#define AP96_GPIO_LED_5_GREEN 5 -#define AP96_GPIO_LED_4_ORANGE 6 - -/* Reset button - next to the power connector */ -#define AP96_GPIO_BTN_RESET 3 -/* WPS button - next to a led on right */ -#define AP96_GPIO_BTN_WPS 8 - -#define AP96_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AP96_KEYS_DEBOUNCE_INTERVAL (3 * AP96_KEYS_POLL_INTERVAL) - -#define AP96_WMAC0_MAC_OFFSET 0x120c -#define AP96_WMAC1_MAC_OFFSET 0x520c -#define AP96_CALDATA0_OFFSET 0x1000 -#define AP96_CALDATA1_OFFSET 0x5000 - -/* - * AP96 has 12 unlabeled leds in the front; these are numbered from 1 to 12 - * below (from left to right on the board). Led 1 seems to be on whenever the - * board is powered. Led 11 shows LAN link activity actity. Led 3 is orange; - * others are green. - * - * In addition, there is one led next to a button on the right side for WPS. - */ -static struct gpio_led ap96_leds_gpio[] __initdata = { - { - .name = "ap96:green:led2", - .gpio = AP96_GPIO_LED_2_GREEN, - .active_low = 1, - }, { - .name = "ap96:green:led3", - .gpio = AP96_GPIO_LED_3_GREEN, - .active_low = 1, - }, { - .name = "ap96:orange:led4", - .gpio = AP96_GPIO_LED_4_ORANGE, - .active_low = 1, - }, { - .name = "ap96:green:led5", - .gpio = AP96_GPIO_LED_5_GREEN, - .active_low = 1, - }, { - .name = "ap96:green:led12", - .gpio = AP96_GPIO_LED_12_GREEN, - .active_low = 1, - }, { /* next to a button on right */ - .name = "ap96:green:wps", - .gpio = AP96_GPIO_LED_WPS_GREEN, - .active_low = 1, - } -}; - -static struct gpio_keys_button ap96_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP96_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP96_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -#define AP96_WAN_PHYMASK 0x10 -#define AP96_LAN_PHYMASK 0x0f - -static void __init ap96_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_mdio(0, ~(AP96_WAN_PHYMASK | AP96_LAN_PHYMASK)); - - ath79_init_mac(ath79_eth0_data.mac_addr, art, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = AP96_LAN_PHYMASK; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - - ath79_init_mac(ath79_eth1_data.mac_addr, art, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = AP96_WAN_PHYMASK; - - ath79_eth1_pll_data.pll_1000 = 0x1f000000; - - ath79_register_eth(1); - - ath79_register_usb(); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap96_leds_gpio), - ap96_leds_gpio); - - ath79_register_gpio_keys_polled(-1, AP96_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap96_gpio_keys), - ap96_gpio_keys); - - ap94_pci_init(art + AP96_CALDATA0_OFFSET, - art + AP96_WMAC0_MAC_OFFSET, - art + AP96_CALDATA1_OFFSET, - art + AP96_WMAC1_MAC_OFFSET); -} - -MIPS_MACHINE(ATH79_MACH_AP96, "AP96", "Atheros AP96", ap96_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c deleted file mode 100644 index c6c6463224..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c +++ /dev/null @@ -1,227 +0,0 @@ -/* - * TP-Link Archer C25 v1 board support - * - * Copyright (C) 2017 Ludwig Thomeczek <ledesrc@wxorx.net> - * based on mach-archer-c60/C59-v1.c - * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include <linux/gpio.h> - -#include "common.h" -#include "dev-m25p80.h" -#include "machtypes.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include <linux/spi/spi_gpio.h> -#include <linux/spi/74x164.h> - -#define ARCHER_C25_GPIO_SHIFT_OE 21 /* OE, Output Enable */ -#define ARCHER_C25_GPIO_SHIFT_SER 14 /* DS, Data Serial Input */ -#define ARCHER_C25_GPIO_SHIFT_SRCLK 15 /* SHCP, Shift Reg Clock Input */ -#define ARCHER_C25_GPIO_SHIFT_SRCLR 19 /* MR, Master Reset */ -#define ARCHER_C25_GPIO_SHIFT_RCLK 16 /* STCP, Storage Reg Clock Input */ - -#define ARCHER_C25_74HC_GPIO_BASE 32 -#define ARCHER_C25_74HC_GPIO_LED_WAN_AMBER (ARCHER_C25_74HC_GPIO_BASE + 4) -#define ARCHER_C25_74HC_GPIO_LED_WAN_GREEN (ARCHER_C25_74HC_GPIO_BASE + 5) -#define ARCHER_C25_74HC_GPIO_LED_WLAN2 (ARCHER_C25_74HC_GPIO_BASE + 6) -#define ARCHER_C25_74HC_GPIO_LED_WLAN5 (ARCHER_C25_74HC_GPIO_BASE + 7) -#define ARCHER_C25_74HC_GPIO_LED_LAN1 (ARCHER_C25_74HC_GPIO_BASE + 0) -#define ARCHER_C25_74HC_GPIO_LED_LAN2 (ARCHER_C25_74HC_GPIO_BASE + 1) -#define ARCHER_C25_74HC_GPIO_LED_LAN3 (ARCHER_C25_74HC_GPIO_BASE + 2) -#define ARCHER_C25_74HC_GPIO_LED_LAN4 (ARCHER_C25_74HC_GPIO_BASE + 3) - -#define ARCHER_C25_V1_SSR_BIT_0 0 -#define ARCHER_C25_V1_SSR_BIT_1 1 -#define ARCHER_C25_V1_SSR_BIT_2 2 -#define ARCHER_C25_V1_SSR_BIT_3 3 -#define ARCHER_C25_V1_SSR_BIT_4 4 -#define ARCHER_C25_V1_SSR_BIT_5 5 -#define ARCHER_C25_V1_SSR_BIT_6 6 -#define ARCHER_C25_V1_SSR_BIT_7 7 - - -#define ARCHER_C25_V1_KEYS_POLL_INTERVAL 20 -#define ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL \ - (3 * ARCHER_C25_V1_KEYS_POLL_INTERVAL) - -#define ARCHER_C25_V1_GPIO_BTN_RESET 1 -#define ARCHER_C25_V1_GPIO_BTN_RFKILL 22 - -#define ARCHER_C25_V1_GPIO_LED_POWER 17 -#define ARCHER_C25_V1_GPIO_LED_WPS 2 - -#define ARCHER_C25_V1_WMAC_CALDATA_OFFSET 0x1000 - -static struct spi_gpio_platform_data archer_c25_v1_spi_data = { - .sck = ARCHER_C25_GPIO_SHIFT_SRCLK, - .miso = SPI_GPIO_NO_MISO, - .mosi = ARCHER_C25_GPIO_SHIFT_SER, - .num_chipselect = 1, -}; - -static u8 archer_c25_v1_ssr_initdata[] = { - BIT(ARCHER_C25_V1_SSR_BIT_7) | - BIT(ARCHER_C25_V1_SSR_BIT_6) | - BIT(ARCHER_C25_V1_SSR_BIT_5) | - BIT(ARCHER_C25_V1_SSR_BIT_4) | - BIT(ARCHER_C25_V1_SSR_BIT_3) | - BIT(ARCHER_C25_V1_SSR_BIT_2) | - BIT(ARCHER_C25_V1_SSR_BIT_1) -}; - -static struct gen_74x164_chip_platform_data archer_c25_v1_ssr_data = { - .base = ARCHER_C25_74HC_GPIO_BASE, - .num_registers = ARRAY_SIZE(archer_c25_v1_ssr_initdata), - .init_data = archer_c25_v1_ssr_initdata, -}; - -static struct platform_device archer_c25_v1_spi_device = { - .name = "spi_gpio", - .id = 1, - .dev = { - .platform_data = &archer_c25_v1_spi_data, - }, -}; - -static struct spi_board_info archer_c25_v1_spi_info[] = { - { - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 10000000, - .modalias = "74x164", - .platform_data = &archer_c25_v1_ssr_data, - .controller_data = (void *) ARCHER_C25_GPIO_SHIFT_RCLK, - }, -}; - -static struct gpio_led archer_c25_v1_leds_gpio[] __initdata = { - { - .name = "archer-c25-v1:green:power", - .gpio = ARCHER_C25_V1_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "archer-c25-v1:green:wps", - .gpio = ARCHER_C25_V1_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "archer-c25-v1:green:wlan2g", - .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN2, - .active_low = 1, - }, { - .name = "archer-c25-v1:green:wlan5g", - .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN5, - .active_low = 1, - }, { - .name = "archer-c25-v1:green:lan1", - .gpio = ARCHER_C25_74HC_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "archer-c25-v1:green:lan2", - .gpio = ARCHER_C25_74HC_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "archer-c25-v1:green:lan3", - .gpio = ARCHER_C25_74HC_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "archer-c25-v1:green:lan4", - .gpio = ARCHER_C25_74HC_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "archer-c25-v1:green:wan", - .gpio = ARCHER_C25_74HC_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, { - .name = "archer-c25-v1:amber:wan", - .gpio = ARCHER_C25_74HC_GPIO_LED_WAN_AMBER, - .active_low = 1, - }, -}; - -static struct gpio_keys_button archer_c25_v1_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C25_V1_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "RFKILL button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C25_V1_GPIO_BTN_RFKILL, - .active_low = 1, - }, -}; - -static void __init archer_c25_v1_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0008); - u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000); - - ath79_register_m25p80(NULL); - - spi_register_board_info(archer_c25_v1_spi_info, - ARRAY_SIZE(archer_c25_v1_spi_info)); - - platform_device_register(&archer_c25_v1_spi_device); - - gpio_request_one(ARCHER_C25_GPIO_SHIFT_OE, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "LED control"); - - gpio_request_one(ARCHER_C25_GPIO_SHIFT_SRCLR, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "LED reset"); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c25_v1_leds_gpio), - archer_c25_v1_leds_gpio); - - ath79_register_gpio_keys_polled(-1, ARCHER_C25_V1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(archer_c25_v1_gpio_keys), - archer_c25_v1_gpio_keys); - - ath79_register_mdio(0, 0x0); - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - - /* WAN port */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(4); - ath79_register_eth(0); - - /* LAN ports */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_switch_data.phy_poll_mask |= BIT(4); - ath79_switch_data.phy4_mii_en = 1; - ath79_register_eth(1); - - ath79_register_wmac(art + ARCHER_C25_V1_WMAC_CALDATA_OFFSET, mac); - ap91_pci_init(NULL, NULL); -} - -MIPS_MACHINE(ATH79_MACH_ARCHER_C25_V1, "ARCHER-C25-V1", "TP-LINK Archer C25 v1", - archer_c25_v1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c deleted file mode 100644 index 6cc40e6a7b..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c +++ /dev/null @@ -1,342 +0,0 @@ -/* - * TP-Link Archer C58/C59 v1 board support - * - * Copyright (C) 2017 Henryk Heisig <hyniu@o2.pl> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/spi/spi_gpio.h> -#include <linux/spi/74x164.h> - -#include "common.h" -#include "dev-m25p80.h" -#include "machtypes.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" - -#define ARCHER_C59_V1_KEYS_POLL_INTERVAL 20 -#define ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C59_V1_KEYS_POLL_INTERVAL) - -#define ARCHER_C59_V1_GPIO_BTN_RESET 21 -#define ARCHER_C59_V1_GPIO_BTN_RFKILL 2 -#define ARCHER_C59_V1_GPIO_BTN_WPS 1 - -#define ARCHER_C59_V1_GPIO_USB_POWER 22 - -#define ARCHER_C59_GPIO_SHIFT_OE 16 -#define ARCHER_C59_GPIO_SHIFT_SER 17 -#define ARCHER_C59_GPIO_SHIFT_SRCLK 18 -#define ARCHER_C59_GPIO_SHIFT_SRCLR 19 -#define ARCHER_C59_GPIO_SHIFT_RCLK 20 - -#define ARCHER_C59_74HC_GPIO_BASE 32 -#define ARCHER_C59_74HC_GPIO_LED_POWER (ARCHER_C59_74HC_GPIO_BASE + 0) -#define ARCHER_C59_74HC_GPIO_LED_WLAN2 (ARCHER_C59_74HC_GPIO_BASE + 1) -#define ARCHER_C59_74HC_GPIO_LED_WLAN5 (ARCHER_C59_74HC_GPIO_BASE + 2) -#define ARCHER_C59_74HC_GPIO_LED_LAN (ARCHER_C59_74HC_GPIO_BASE + 3) -#define ARCHER_C59_74HC_GPIO_LED_WAN_GREEN (ARCHER_C59_74HC_GPIO_BASE + 4) -#define ARCHER_C59_74HC_GPIO_LED_WAN_AMBER (ARCHER_C59_74HC_GPIO_BASE + 5) -#define ARCHER_C59_74HC_GPIO_LED_WPS (ARCHER_C59_74HC_GPIO_BASE + 6) -#define ARCHER_C59_74HC_GPIO_LED_USB (ARCHER_C59_74HC_GPIO_BASE + 7) - -#define ARCHER_C59_V1_SSR_BIT_0 0 -#define ARCHER_C59_V1_SSR_BIT_1 1 -#define ARCHER_C59_V1_SSR_BIT_2 2 -#define ARCHER_C59_V1_SSR_BIT_3 3 -#define ARCHER_C59_V1_SSR_BIT_4 4 -#define ARCHER_C59_V1_SSR_BIT_5 5 -#define ARCHER_C59_V1_SSR_BIT_6 6 -#define ARCHER_C59_V1_SSR_BIT_7 7 - -#define ARCHER_C59_V1_WMAC_CALDATA_OFFSET 0x1000 -#define ARCHER_C59_V1_PCI_CALDATA_OFFSET 0x5000 - -static struct gpio_led archer_c58_v1_leds_gpio[] __initdata = { - { - .name = "archer-c58-v1:green:power", - .gpio = ARCHER_C59_74HC_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "archer-c58-v1:green:wlan2g", - .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN2, - .active_low = 1, - }, - { - .name = "archer-c58-v1:green:wlan5g", - .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN5, - .active_low = 1, - }, - { - .name = "archer-c58-v1:green:lan", - .gpio = ARCHER_C59_74HC_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "archer-c58-v1:green:wan", - .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, - { - .name = "archer-c58-v1:amber:wan", - .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_AMBER, - .active_low = 1, - }, - { - .name = "archer-c58-v1:green:wps", - .gpio = ARCHER_C59_74HC_GPIO_LED_WPS, - .active_low = 1, - }, -}; - -static struct gpio_led archer_c59_v1_leds_gpio[] __initdata = { - { - .name = "archer-c59-v1:green:power", - .gpio = ARCHER_C59_74HC_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "archer-c59-v1:green:wlan2g", - .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN2, - .active_low = 1, - }, - { - .name = "archer-c59-v1:green:wlan5g", - .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN5, - .active_low = 1, - }, - { - .name = "archer-c59-v1:green:lan", - .gpio = ARCHER_C59_74HC_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "archer-c59-v1:green:wan", - .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, - { - .name = "archer-c59-v1:amber:wan", - .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_AMBER, - .active_low = 1, - }, - { - .name = "archer-c59-v1:green:wps", - .gpio = ARCHER_C59_74HC_GPIO_LED_WPS, - .active_low = 1, - }, - { - .name = "archer-c59-v1:green:usb", - .gpio = ARCHER_C59_74HC_GPIO_LED_USB, - .active_low = 1, - }, -}; - -static struct gpio_led archer_c59_v2_leds_gpio[] __initdata = { - { - .name = "archer-c59-v2:green:power", - .gpio = ARCHER_C59_74HC_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "archer-c59-v2:green:wlan2g", - .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN2, - .active_low = 1, - }, - { - .name = "archer-c59-v2:green:wlan5g", - .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN5, - .active_low = 1, - }, - { - .name = "archer-c59-v2:green:lan", - .gpio = ARCHER_C59_74HC_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "archer-c59-v2:green:wan", - .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, - { - .name = "archer-c59-v2:amber:wan", - .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_AMBER, - .active_low = 1, - }, - { - .name = "archer-c59-v2:green:wps", - .gpio = ARCHER_C59_74HC_GPIO_LED_WPS, - .active_low = 1, - }, - { - .name = "archer-c59-v2:green:usb", - .gpio = ARCHER_C59_74HC_GPIO_LED_USB, - .active_low = 1, - }, -}; - -static struct gpio_keys_button archer_c59_v1_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C59_V1_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "RFKILL button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C59_V1_GPIO_BTN_RFKILL, - .active_low = 1, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C59_V1_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - -static struct spi_gpio_platform_data archer_c59_v1_spi_data = { - .sck = ARCHER_C59_GPIO_SHIFT_SRCLK, - .miso = SPI_GPIO_NO_MISO, - .mosi = ARCHER_C59_GPIO_SHIFT_SER, - .num_chipselect = 1, -}; - -static u8 archer_c59_v1_ssr_initdata[] = { - BIT(ARCHER_C59_V1_SSR_BIT_7) | - BIT(ARCHER_C59_V1_SSR_BIT_6) | - BIT(ARCHER_C59_V1_SSR_BIT_5) | - BIT(ARCHER_C59_V1_SSR_BIT_4) | - BIT(ARCHER_C59_V1_SSR_BIT_3) | - BIT(ARCHER_C59_V1_SSR_BIT_2) | - BIT(ARCHER_C59_V1_SSR_BIT_1) -}; - -static struct gen_74x164_chip_platform_data archer_c59_v1_ssr_data = { - .base = ARCHER_C59_74HC_GPIO_BASE, - .num_registers = ARRAY_SIZE(archer_c59_v1_ssr_initdata), - .init_data = archer_c59_v1_ssr_initdata, -}; - -static struct platform_device archer_c59_v1_spi_device = { - .name = "spi_gpio", - .id = 1, - .dev = { - .platform_data = &archer_c59_v1_spi_data, - }, -}; - -static struct spi_board_info archer_c59_v1_spi_info[] = { - { - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 10000000, - .modalias = "74x164", - .platform_data = &archer_c59_v1_ssr_data, - .controller_data = (void *) ARCHER_C59_GPIO_SHIFT_RCLK, - }, -}; - -static void __init archer_c5x_v1_setup(u32 macLocation) -{ - u8 *mac = (u8 *) KSEG1ADDR(macLocation); - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - spi_register_board_info(archer_c59_v1_spi_info, - ARRAY_SIZE(archer_c59_v1_spi_info)); - platform_device_register(&archer_c59_v1_spi_device); - - ath79_register_gpio_keys_polled(-1, ARCHER_C59_V1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(archer_c59_v1_gpio_keys), - archer_c59_v1_gpio_keys); - - ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP | - QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP); - - ath79_register_mdio(0, 0x0); - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - - /* WAN port */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - ath79_register_eth(0); - - /* LAN ports */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_switch_data.phy_poll_mask |= BIT(0); - ath79_switch_data.phy4_mii_en = 1; - ath79_register_eth(1); - - ath79_register_wmac(art + ARCHER_C59_V1_WMAC_CALDATA_OFFSET, mac); - ap91_pci_init(art + ARCHER_C59_V1_PCI_CALDATA_OFFSET, NULL); - - ath79_register_usb(); - gpio_request_one(ARCHER_C59_V1_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - gpio_request_one(ARCHER_C59_GPIO_SHIFT_OE, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "LED control"); - gpio_request_one(ARCHER_C59_GPIO_SHIFT_SRCLR, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "LED reset"); -} - -static void __init archer_c58_v1_setup(void) -{ - archer_c5x_v1_setup(0x1f010008); - ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c58_v1_leds_gpio), - archer_c58_v1_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_ARCHER_C58_V1, "ARCHER-C58-V1", - "TP-LINK Archer C58 v1", archer_c58_v1_setup); - -static void __init archer_c59_v1_setup(void) -{ - archer_c5x_v1_setup(0x1f010008); - ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio), - archer_c59_v1_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_ARCHER_C59_V1, "ARCHER-C59-V1", - "TP-LINK Archer C59 v1", archer_c59_v1_setup); - -static void __init archer_c59_v2_setup(void) -{ - archer_c5x_v1_setup(0x1f030008); - ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v2_leds_gpio), - archer_c59_v2_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_ARCHER_C59_V2, "ARCHER-C59-V2", - "TP-LINK Archer C59 v2", archer_c59_v2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c deleted file mode 100644 index a0839e6bca..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c +++ /dev/null @@ -1,225 +0,0 @@ -/* - * TP-Link Archer C60 v1 board support - * - * Copyright (C) 2017 Henryk Heisig <hyniu@o2.pl> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include <linux/gpio.h> - -#include "common.h" -#include "dev-m25p80.h" -#include "machtypes.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" - -#define ARCHER_C60_V1_GPIO_LED_LAN 2 -#define ARCHER_C60_V1_GPIO_LED_POWER 16 -#define ARCHER_C60_V1_GPIO_LED_WLAN2 17 -#define ARCHER_C60_V1_GPIO_LED_WLAN5 18 -#define ARCHER_C60_V1_GPIO_LED_WPS 19 -#define ARCHER_C60_V1_GPIO_LED_WAN_GREEN 20 -#define ARCHER_C60_V1_GPIO_LED_WAN_AMBER 22 - - -#define ARCHER_C60_V1_KEYS_POLL_INTERVAL 20 -#define ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C60_V1_KEYS_POLL_INTERVAL) - -#define ARCHER_C60_V1_GPIO_BTN_RESET 21 -#define ARCHER_C60_V1_GPIO_BTN_RFKILL 1 - - - -#define ARCHER_C60_V1_WMAC_CALDATA_OFFSET 0x1000 -#define ARCHER_C60_V1_PCI_CALDATA_OFFSET 0x5000 - -static struct gpio_led archer_c60_v1_leds_gpio[] __initdata = { - { - .name = "archer-c60-v1:green:power", - .gpio = ARCHER_C60_V1_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "archer-c60-v1:green:wlan2g", - .gpio = ARCHER_C60_V1_GPIO_LED_WLAN2, - .active_low = 1, - }, - { - .name = "archer-c60-v1:green:wlan5g", - .gpio = ARCHER_C60_V1_GPIO_LED_WLAN5, - .active_low = 1, - }, - { - .name = "archer-c60-v1:green:lan", - .gpio = ARCHER_C60_V1_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "archer-c60-v1:green:wan", - .gpio = ARCHER_C60_V1_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, - { - .name = "archer-c60-v1:amber:wan", - .gpio = ARCHER_C60_V1_GPIO_LED_WAN_AMBER, - .active_low = 1, - }, - { - .name = "archer-c60-v1:green:wps", - .gpio = ARCHER_C60_V1_GPIO_LED_WPS, - .active_low = 1, - }, -}; - -static struct gpio_led archer_c60_v2_leds_gpio[] __initdata = { - { - .name = "archer-c60-v2:green:power", - .gpio = ARCHER_C60_V1_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "archer-c60-v2:green:wlan2g", - .gpio = ARCHER_C60_V1_GPIO_LED_WLAN2, - .active_low = 1, - }, - { - .name = "archer-c60-v2:green:wlan5g", - .gpio = ARCHER_C60_V1_GPIO_LED_WLAN5, - .active_low = 1, - }, - { - .name = "archer-c60-v2:green:lan", - .gpio = ARCHER_C60_V1_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "archer-c60-v2:green:wan", - .gpio = ARCHER_C60_V1_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, - { - .name = "archer-c60-v2:amber:wan", - .gpio = ARCHER_C60_V1_GPIO_LED_WAN_AMBER, - .active_low = 1, - }, - { - .name = "archer-c60-v2:green:wps", - .gpio = ARCHER_C60_V1_GPIO_LED_WPS, - .active_low = 1, - }, -}; - -static struct gpio_keys_button archer_c60_v1_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C60_V1_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "RFKILL button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C60_V1_GPIO_BTN_RFKILL, - .active_low = 1, - }, -}; - -static void __init archer_c60_v1_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f010008); - u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c60_v1_leds_gpio), - archer_c60_v1_leds_gpio); - - ath79_register_gpio_keys_polled(-1, ARCHER_C60_V1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(archer_c60_v1_gpio_keys), - archer_c60_v1_gpio_keys); - - ath79_register_mdio(0, 0x0); - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - - /* WAN port */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(4); - ath79_register_eth(0); - - /* LAN ports */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_switch_data.phy_poll_mask |= BIT(4); - ath79_switch_data.phy4_mii_en = 1; - ath79_register_eth(1); - - ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac); - ap91_pci_init(art + ARCHER_C60_V1_PCI_CALDATA_OFFSET, NULL); -} - -MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V1, "ARCHER-C60-V1", - "TP-LINK Archer C60 v1", archer_c60_v1_setup); - -static void __init archer_c60_v2_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fb08); - u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c60_v2_leds_gpio), - archer_c60_v2_leds_gpio); - - ath79_register_gpio_keys_polled(-1, ARCHER_C60_V1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(archer_c60_v1_gpio_keys), - archer_c60_v1_gpio_keys); - - ath79_register_mdio(0, 0x0); - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - - /* WAN port */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(4); - ath79_register_eth(0); - - /* LAN ports */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_switch_data.phy_poll_mask |= BIT(4); - ath79_switch_data.phy4_mii_en = 1; - ath79_register_eth(1); - - ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac); - ap91_pci_init(art + ARCHER_C60_V1_PCI_CALDATA_OFFSET, NULL); -} - -MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V2, "ARCHER-C60-V2", - "TP-LINK Archer C60 v2", archer_c60_v2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v4.c deleted file mode 100644 index ee9ce49bcf..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v4.c +++ /dev/null @@ -1,260 +0,0 @@ - -/* - * Atheros ARCHER_C7 reference board support - * - * Copyright (c) 2017 Felix Fietkau <nbd@nbd.name> - * Copyright (c) 2014 The Linux Foundation. All rights reserved. - * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> -#include <linux/proc_fs.h> -#include <linux/gpio.h> -#include <linux/spi/spi_gpio.h> -#include <linux/spi/74x164.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-m25p80.h" -#include "machtypes.h" -#include "pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" - - -#define ARCHER_C7_GPIO_SHIFT_OE 1 -#define ARCHER_C7_GPIO_SHIFT_SER 14 -#define ARCHER_C7_GPIO_SHIFT_SRCLK 15 -#define ARCHER_C7_GPIO_SHIFT_RCLK 16 -#define ARCHER_C7_GPIO_SHIFT_SRCLR 21 - -#define ARCHER_C7_GPIO_BTN_RESET 5 -#define ARCHER_C7_GPIO_BTN_WPS_WIFI 2 - -#define ARCHER_C7_GPIO_LED_WLAN5 9 -#define ARCHER_C7_GPIO_LED_POWER 6 -#define ARCHER_C7_GPIO_LED_USB1 7 -#define ARCHER_C7_GPIO_LED_USB2 8 - -#define ARCHER_C7_74HC_GPIO_BASE 32 -#define ARCHER_C7_GPIO_LED_WPS (ARCHER_C7_74HC_GPIO_BASE + 0) -#define ARCHER_C7_GPIO_LED_LAN1 (ARCHER_C7_74HC_GPIO_BASE + 1) -#define ARCHER_C7_GPIO_LED_LAN2 (ARCHER_C7_74HC_GPIO_BASE + 2) -#define ARCHER_C7_GPIO_LED_LAN3 (ARCHER_C7_74HC_GPIO_BASE + 3) -#define ARCHER_C7_GPIO_LED_LAN4 (ARCHER_C7_74HC_GPIO_BASE + 4) -#define ARCHER_C7_GPIO_LED_WAN_GREEN (ARCHER_C7_74HC_GPIO_BASE + 5) -#define ARCHER_C7_GPIO_LED_WAN_AMBER (ARCHER_C7_74HC_GPIO_BASE + 6) -#define ARCHER_C7_GPIO_LED_WLAN2 (ARCHER_C7_74HC_GPIO_BASE + 7) - -#define ARCHER_C7_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ARCHER_C7_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C7_KEYS_POLL_INTERVAL) - -#define ARCHER_C7_MAC0_OFFSET 0 -#define ARCHER_C7_MAC1_OFFSET 6 -#define ARCHER_C7_WMAC_CALDATA_OFFSET 0x1000 - -#define ARCHER_C7_GPIO_MDC 3 -#define ARCHER_C7_GPIO_MDIO 4 - -static struct spi_gpio_platform_data archer_c7_v4_spi_data = { - .sck = ARCHER_C7_GPIO_SHIFT_SRCLK, - .miso = SPI_GPIO_NO_MISO, - .mosi = ARCHER_C7_GPIO_SHIFT_SER, - .num_chipselect = 1, -}; - -static u8 archer_c7_v4_ssr_initdata = 0xff; - -static struct gen_74x164_chip_platform_data archer_c7_v4_ssr_data = { - .base = ARCHER_C7_74HC_GPIO_BASE, - .num_registers = 1, - .init_data = &archer_c7_v4_ssr_initdata, -}; - -static struct platform_device archer_c7_v4_spi_device = { - .name = "spi_gpio", - .id = 1, - .dev = { - .platform_data = &archer_c7_v4_spi_data, - }, -}; - -static struct spi_board_info archer_c7_v4_spi_info[] = { - { - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 10000000, - .modalias = "74x164", - .platform_data = &archer_c7_v4_ssr_data, - .controller_data = (void *) ARCHER_C7_GPIO_SHIFT_RCLK, - }, -}; - -static struct gpio_led archer_c7_v4_leds_gpio[] __initdata = { - { - .name = "archer-c7-v4:green:power", - .gpio = ARCHER_C7_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "archer-c7-v4:green:wps", - .gpio = ARCHER_C7_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "archer-c7-v4:green:wlan2g", - .gpio = ARCHER_C7_GPIO_LED_WLAN2, - .active_low = 1, - }, { - .name = "archer-c7-v4:green:wlan5g", - .gpio = ARCHER_C7_GPIO_LED_WLAN5, - .active_low = 1, - }, { - .name = "archer-c7-v4:green:lan1", - .gpio = ARCHER_C7_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "archer-c7-v4:green:lan2", - .gpio = ARCHER_C7_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "archer-c7-v4:green:lan3", - .gpio = ARCHER_C7_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "archer-c7-v4:green:lan4", - .gpio = ARCHER_C7_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "archer-c7-v4:green:wan", - .gpio = ARCHER_C7_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, { - .name = "archer-c7-v4:amber:wan", - .gpio = ARCHER_C7_GPIO_LED_WAN_AMBER, - .active_low = 1, - }, { - .name = "archer-c7-v4:green:usb1", - .gpio = ARCHER_C7_GPIO_LED_USB1, - .active_low = 1, - }, { - .name = "archer-c7-v4:green:usb2", - .gpio = ARCHER_C7_GPIO_LED_USB2, - .active_low = 1, - }, -}; - -static struct gpio_keys_button archer_c7_v4_gpio_keys[] __initdata = { - { - .desc = "WPS and WIFI button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C7_GPIO_BTN_WPS_WIFI, - .active_low = 1, - }, - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C7_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg archer_c7_v4_ar8337_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -static struct ar8327_platform_data archer_c7_v4_ar8337_data = { - .pad0_cfg = &archer_c7_v4_ar8337_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info archer_c7_v4_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &archer_c7_v4_ar8337_data, - }, -}; - - -static void __init archer_c7_v4_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac = (u8 *) KSEG1ADDR(0x1ff00008); - - ath79_register_m25p80(NULL); - - spi_register_board_info(archer_c7_v4_spi_info, - ARRAY_SIZE(archer_c7_v4_spi_info)); - - platform_device_register(&archer_c7_v4_spi_device); - - gpio_request_one(ARCHER_C7_GPIO_SHIFT_OE, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "LED control"); - - gpio_request_one(ARCHER_C7_GPIO_SHIFT_SRCLR, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "LED reset"); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_v4_leds_gpio), - archer_c7_v4_leds_gpio); - - ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL, - ARRAY_SIZE(archer_c7_v4_gpio_keys), - archer_c7_v4_gpio_keys); - - ath79_register_usb(); - - ath79_gpio_output_select(ARCHER_C7_GPIO_MDC, QCA956X_GPIO_OUT_MUX_GE0_MDC); - ath79_gpio_output_select(ARCHER_C7_GPIO_MDIO, QCA956X_GPIO_OUT_MUX_GE0_MDO); - - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(archer_c7_v4_mdio0_info, - ARRAY_SIZE(archer_c7_v4_mdio0_info)); - - ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, mac); - ath79_register_pci(); - - /* GMAC0 is connected to an AR8337 switch */ - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_ARCHER_C7_V4, "ARCHER-C7-V4", "TP-LINK Archer C7 v4", - archer_c7_v4_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v5.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v5.c deleted file mode 100644 index 0dec008314..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v5.c +++ /dev/null @@ -1,207 +0,0 @@ -/* - * Atheros ARCHER_C7 reference board support - * - * Copyright (c) 2018 Arvid E. Picciani <aep@exys.org> - * Copyright (c) 2017 Felix Fietkau <nbd@nbd.name> - * Copyright (c) 2014 The Linux Foundation. All rights reserved. - * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> -#include <linux/proc_fs.h> -#include <linux/gpio.h> -#include <linux/spi/spi_gpio.h> -#include <linux/spi/74x164.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-m25p80.h" -#include "machtypes.h" -#include "pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" - - -#define ARCHER_C7_GPIO_BTN_RESET 5 -#define ARCHER_C7_GPIO_BTN_WPS_WIFI 2 - -#define ARCHER_C7_GPIO_LED_WLAN5 9 -#define ARCHER_C7_GPIO_LED_POWER 6 -#define ARCHER_C7_GPIO_LED_USB 7 -#define ARCHER_C7_GPIO_LED_WPS 1 -#define ARCHER_C7_GPIO_LED_LAN1 8 -#define ARCHER_C7_GPIO_LED_LAN2 17 -#define ARCHER_C7_GPIO_LED_LAN3 16 -#define ARCHER_C7_GPIO_LED_LAN4 15 -#define ARCHER_C7_GPIO_LED_WAN_GREEN 21 -#define ARCHER_C7_GPIO_LED_WAN_AMBER 20 -#define ARCHER_C7_GPIO_LED_WLAN2 14 -#define ARCHER_C7_GPIO_USB_PWR 19 - -#define ARCHER_C7_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ARCHER_C7_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C7_KEYS_POLL_INTERVAL) - -#define ARCHER_C7_MAC0_OFFSET 0 -#define ARCHER_C7_MAC1_OFFSET 6 -#define ARCHER_C7_WMAC_CALDATA_OFFSET 0x1000 - -#define ARCHER_C7_GPIO_MDC 3 -#define ARCHER_C7_GPIO_MDIO 4 - -static struct gpio_led archer_c7_v5_leds_gpio[] __initdata = { - { - .name = "archer-c7-v5:green:power", - .gpio = ARCHER_C7_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "archer-c7-v5:green:wps", - .gpio = ARCHER_C7_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "archer-c7-v5:green:wlan2g", - .gpio = ARCHER_C7_GPIO_LED_WLAN2, - .active_low = 1, - }, { - .name = "archer-c7-v5:green:wlan5g", - .gpio = ARCHER_C7_GPIO_LED_WLAN5, - .active_low = 1, - }, { - .name = "archer-c7-v5:green:lan1", - .gpio = ARCHER_C7_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "archer-c7-v5:green:lan2", - .gpio = ARCHER_C7_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "archer-c7-v5:green:lan3", - .gpio = ARCHER_C7_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "archer-c7-v5:green:lan4", - .gpio = ARCHER_C7_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "archer-c7-v5:green:wan", - .gpio = ARCHER_C7_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, { - .name = "archer-c7-v5:amber:wan", - .gpio = ARCHER_C7_GPIO_LED_WAN_AMBER, - .active_low = 1, - }, { - .name = "archer-c7-v5:green:usb", - .gpio = ARCHER_C7_GPIO_LED_USB, - .active_low = 1, - }, -}; - -static struct gpio_keys_button archer_c7_v5_gpio_keys[] __initdata = { - { - .desc = "WPS and WIFI button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C7_GPIO_BTN_WPS_WIFI, - .active_low = 1, - }, - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C7_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - - -static struct ar8327_pad_cfg archer_c7_v5_ar8337_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -static struct ar8327_platform_data archer_c7_v5_ar8337_data = { - .pad0_cfg = &archer_c7_v5_ar8337_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info archer_c7_v5_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &archer_c7_v5_ar8337_data, - }, -}; - - -static void __init archer_c7_v5_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1f050000); - u8 *mac = (u8 *) KSEG1ADDR(0x1f060008); - - ath79_register_m25p80(NULL); - - - ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_v5_leds_gpio), - archer_c7_v5_leds_gpio); - - ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL, - ARRAY_SIZE(archer_c7_v5_gpio_keys), - archer_c7_v5_gpio_keys); - - ath79_register_usb(); - - ath79_gpio_output_select(ARCHER_C7_GPIO_MDC, QCA956X_GPIO_OUT_MUX_GE0_MDC); - ath79_gpio_output_select(ARCHER_C7_GPIO_MDIO, QCA956X_GPIO_OUT_MUX_GE0_MDO); - - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(archer_c7_v5_mdio0_info, - ARRAY_SIZE(archer_c7_v5_mdio0_info)); - - gpio_request_one(ARCHER_C7_GPIO_USB_PWR, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - - ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, mac); - ath79_register_pci(); - - /* GMAC0 is connected to an AR8337 switch */ - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_ARCHER_C7_V5, "ARCHER-C7-V5", "TP-LINK Archer C7 v5", - archer_c7_v5_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c deleted file mode 100644 index 53c539f85a..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c +++ /dev/null @@ -1,349 +0,0 @@ -/* - * TP-LINK Archer C5/C7/TL-WDR4900 v2 board support - * - * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2014 施康成 <tenninjas@tenninjas.ca> - * Copyright (c) 2014 Imre Kaloz <kaloz@openwrt.org> - * - * Based on the Qualcomm Atheros AP135/AP136 reference board support code - * Copyright (c) 2012 Qualcomm Atheros - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define ARCHER_C7_GPIO_LED_WLAN2G 12 -#define ARCHER_C7_GPIO_LED_SYSTEM 14 -#define ARCHER_C7_GPIO_LED_QSS 15 -#define ARCHER_C7_GPIO_LED_WLAN5G 17 -#define ARCHER_C7_GPIO_LED_USB1 18 -#define ARCHER_C7_GPIO_LED_USB2 19 - -#define ARCHER_C7_GPIO_BTN_RFKILL 23 -#define ARCHER_C7_V2_GPIO_BTN_RFKILL 23 -#define ARCHER_C7_GPIO_BTN_RESET 16 - -#define ARCHER_C7_GPIO_USB1_POWER 22 -#define ARCHER_C7_GPIO_USB2_POWER 21 - -#define ARCHER_C7_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ARCHER_C7_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C7_KEYS_POLL_INTERVAL) - -#define ARCHER_C7_WMAC_CALDATA_OFFSET 0x1000 -#define ARCHER_C7_PCIE_CALDATA_OFFSET 0x5000 - -static const char *archer_c7_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data archer_c7_flash_data = { - .part_probes = archer_c7_part_probes, -}; - -static struct gpio_led archer_c7_leds_gpio[] __initdata = { - { - .name = "tp-link:green:qss", - .gpio = ARCHER_C7_GPIO_LED_QSS, - .active_low = 1, - }, - { - .name = "tp-link:green:system", - .gpio = ARCHER_C7_GPIO_LED_SYSTEM, - .active_low = 1, - }, - { - .name = "tp-link:green:wlan2g", - .gpio = ARCHER_C7_GPIO_LED_WLAN2G, - .active_low = 1, - }, - { - .name = "tp-link:green:wlan5g", - .gpio = ARCHER_C7_GPIO_LED_WLAN5G, - .active_low = 1, - }, - { - .name = "tp-link:green:usb1", - .gpio = ARCHER_C7_GPIO_LED_USB1, - .active_low = 1, - }, - { - .name = "tp-link:green:usb2", - .gpio = ARCHER_C7_GPIO_LED_USB2, - .active_low = 1, - }, -}; - -static struct gpio_led wdr4900_leds_gpio[] __initdata = { - { - .name = "tp-link:blue:qss", - .gpio = ARCHER_C7_GPIO_LED_QSS, - .active_low = 1, - }, - { - .name = "tp-link:blue:system", - .gpio = ARCHER_C7_GPIO_LED_SYSTEM, - .active_low = 1, - }, - { - .name = "tp-link:blue:wlan2g", - .gpio = ARCHER_C7_GPIO_LED_WLAN2G, - .active_low = 1, - }, - { - .name = "tp-link:green:usb1", - .gpio = ARCHER_C7_GPIO_LED_USB1, - .active_low = 1, - }, - { - .name = "tp-link:green:usb2", - .gpio = ARCHER_C7_GPIO_LED_USB2, - .active_low = 1, - }, -}; - -static struct gpio_keys_button archer_c7_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C7_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "RFKILL switch", - .type = EV_SW, - .code = KEY_RFKILL, - .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C7_GPIO_BTN_RFKILL, - }, -}; - -static struct gpio_keys_button archer_c7_v2_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C7_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "RFKILL switch", - .type = EV_SW, - .code = KEY_RFKILL, - .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C7_V2_GPIO_BTN_RFKILL, - }, -}; - -static struct gpio_keys_button wdr4900_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C7_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static const struct ar8327_led_info archer_c7_leds_ar8327[] = { - AR8327_LED_INFO(PHY0_0, HW, "tp-link:green:wan"), - AR8327_LED_INFO(PHY1_0, HW, "tp-link:green:lan1"), - AR8327_LED_INFO(PHY2_0, HW, "tp-link:green:lan2"), - AR8327_LED_INFO(PHY3_0, HW, "tp-link:green:lan3"), - AR8327_LED_INFO(PHY4_0, HW, "tp-link:green:lan4"), -}; - -/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */ -static struct ar8327_pad_cfg archer_c7_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */ -static struct ar8327_pad_cfg archer_c7_ar8327_pad6_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_led_cfg archer_c7_ar8327_led_cfg = { - .led_ctrl0 = 0xc737c737, - .led_ctrl1 = 0x00000000, - .led_ctrl2 = 0x00000000, - .led_ctrl3 = 0x0030c300, - .open_drain = false, -}; - -static struct ar8327_platform_data archer_c7_ar8327_data = { - .pad0_cfg = &archer_c7_ar8327_pad0_cfg, - .pad6_cfg = &archer_c7_ar8327_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .port6_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &archer_c7_ar8327_led_cfg, - .num_leds = ARRAY_SIZE(archer_c7_leds_ar8327), - .leds = archer_c7_leds_ar8327, -}; - -static struct mdio_board_info archer_c7_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &archer_c7_ar8327_data, - }, -}; - -static void __init common_setup(bool pcie_slot) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 tmpmac[ETH_ALEN]; - u8 tmpmac2[ETH_ALEN]; - - ath79_register_m25p80(&archer_c7_flash_data); - - if (pcie_slot) { - ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, mac); - ath79_register_pci(); - } else { - ath79_init_mac(tmpmac, mac, -1); - ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, tmpmac); - - ath79_init_mac(tmpmac2, mac, -2); - ap9x_pci_setup_wmac_led_pin(0, 0); - ap91_pci_init(art + ARCHER_C7_PCIE_CALDATA_OFFSET, tmpmac2); - } - - mdiobus_register_board_info(archer_c7_mdio0_info, - ARRAY_SIZE(archer_c7_mdio0_info)); - ath79_register_mdio(0, 0x0); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - /* GMAC0 is connected to the RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x56000000; - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_register_eth(0); - - /* GMAC1 is connected to the SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_pll_data.pll_1000 = 0x03000101; - - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - ath79_register_eth(1); - - gpio_request_one(ARCHER_C7_GPIO_USB1_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB1 power"); - gpio_request_one(ARCHER_C7_GPIO_USB2_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB2 power"); - ath79_register_usb(); -} - -static void __init archer_c5_setup(void) -{ - ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL, - ARRAY_SIZE(archer_c7_gpio_keys), - archer_c7_gpio_keys); - ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_leds_gpio), - archer_c7_leds_gpio); - common_setup(true); -} - -MIPS_MACHINE(ATH79_MACH_ARCHER_C5, "ARCHER-C5", "TP-LINK Archer C5", - archer_c5_setup); - -static void __init archer_c7_setup(void) -{ - ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL, - ARRAY_SIZE(archer_c7_gpio_keys), - archer_c7_gpio_keys); - ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_leds_gpio), - archer_c7_leds_gpio); - common_setup(true); -} - -MIPS_MACHINE(ATH79_MACH_ARCHER_C7, "ARCHER-C7", "TP-LINK Archer C7", - archer_c7_setup); - -static void __init archer_c7_v2_setup(void) -{ - ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL, - ARRAY_SIZE(archer_c7_v2_gpio_keys), - archer_c7_v2_gpio_keys); - ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_leds_gpio), - archer_c7_leds_gpio); - common_setup(true); -} - -MIPS_MACHINE(ATH79_MACH_ARCHER_C7_V2, "ARCHER-C7-V2", "TP-LINK Archer C7", - archer_c7_v2_setup); - -static void __init tl_wdr4900_v2_setup(void) -{ - ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wdr4900_gpio_keys), - wdr4900_gpio_keys); - ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr4900_leds_gpio), - wdr4900_leds_gpio); - common_setup(false); -} - -MIPS_MACHINE(ATH79_MACH_TL_WDR4900_V2, "TL-WDR4900-v2", "TP-LINK TL-WDR4900 v2", - tl_wdr4900_v2_setup) - diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c deleted file mode 100644 index 8ab07d514b..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * Arduino Yun support - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> -#include <linux/gpio.h> -#include "common.h" - -// Uncomment to have reset on gpio18 instead of gipo7 -#define DS2_B - -#define DS_GPIO_LED_WLAN 0 -#define DS_GPIO_LED_USB 1 - -#define DS_GPIO_OE 21 -#define DS_GPIO_AVR_RESET 18 - -// Maintained to have the console in the previous version of DS2 working -#define DS_GPIO_AVR_RESET_DS2 7 - -#define DS_GPIO_OE2 22 -#define DS_GPIO_UART_ENA 23 -#define DS_GPIO_CONF_BTN 20 - -#define DS_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DS_KEYS_DEBOUNCE_INTERVAL (3 * DS_KEYS_POLL_INTERVAL) - -#define DS_MAC0_OFFSET 0x0000 -#define DS_MAC1_OFFSET 0x0006 -#define DS_CALDATA_OFFSET 0x1000 -#define DS_WMAC_MAC_OFFSET 0x1002 - - -static struct gpio_led ds_leds_gpio[] __initdata = { - { - .name = "arduino:white:usb", - .gpio = DS_GPIO_LED_USB, - .active_low = 0, - }, - { - .name = "arduino:blue:wlan", - .gpio = DS_GPIO_LED_WLAN, - .active_low = 0, - }, -}; - -static struct gpio_keys_button ds_gpio_keys[] __initdata = { - { - .desc = "configuration button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DS_KEYS_DEBOUNCE_INTERVAL, - .gpio = DS_GPIO_CONF_BTN, - .active_low = 1, - }, -}; - -static void __init ds_common_setup(void) -{ - static u8 mac[6]; - - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - ath79_register_m25p80(NULL); - - if (ar93xx_wmac_read_mac_address(mac)) { - ath79_register_wmac(NULL, NULL); - } else { - ath79_register_wmac(art + DS_CALDATA_OFFSET, - art + DS_WMAC_MAC_OFFSET); - memcpy(mac, art + DS_WMAC_MAC_OFFSET, sizeof(mac)); - } - - mac[3] |= 0x08; - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - - mac[3] &= 0xF7; - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - ath79_register_mdio(0, 0x0); - - /* LAN ports */ - ath79_register_eth(1); - - /* WAN port */ - ath79_register_eth(0); -} - -static void __init ds_setup(void) -{ - u32 t; - - ds_common_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ds_leds_gpio), - ds_leds_gpio); - ath79_register_gpio_keys_polled(-1, DS_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ds_gpio_keys), - ds_gpio_keys); - ath79_register_usb(); - - /* use the swtich_led directly form sysfs */ - ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN); - - //Disable the Function for some pins to have GPIO functionality active - // GPIO6-7-8 and GPIO11 - ath79_gpio_function_setup(AR933X_GPIO_FUNC_JTAG_DISABLE | AR933X_GPIO_FUNC_I2S_MCK_EN, 0); - - ath79_gpio_function2_setup(AR933X_GPIO_FUNC2_JUMPSTART_DISABLE, 0); - - printk("Setting DogStick2 GPIO\n"); - - t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); - t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN; - ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t); - - // Put the avr reset to high - if (gpio_request_one(DS_GPIO_AVR_RESET_DS2, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "OE-1") != 0) - printk("Error setting GPIO OE\n"); - gpio_unexport(DS_GPIO_AVR_RESET_DS2); - gpio_free(DS_GPIO_AVR_RESET_DS2); - - // enable OE of level shifter - if (gpio_request_one(DS_GPIO_OE, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "OE-1") != 0) - printk("Error setting GPIO OE\n"); - - if (gpio_request_one(DS_GPIO_UART_ENA, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "UART-ENA") != 0) - printk("Error setting GPIO Uart Enable\n"); - - // enable OE of level shifter - if (gpio_request_one(DS_GPIO_OE2, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "OE-2") != 0) - printk("Error setting GPIO OE2\n"); -} - -MIPS_MACHINE(ATH79_MACH_ARDUINO_YUN, "Yun", "Arduino Yun", ds_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-aw-nr580.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-aw-nr580.c deleted file mode 100644 index 281129b787..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-aw-nr580.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * AzureWave AW-NR580 board support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-m25p80.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "machtypes.h" -#include "pci.h" - -#define AW_NR580_GPIO_LED_READY_RED 0 -#define AW_NR580_GPIO_LED_WLAN 1 -#define AW_NR580_GPIO_LED_READY_GREEN 2 -#define AW_NR580_GPIO_LED_WPS_GREEN 4 -#define AW_NR580_GPIO_LED_WPS_AMBER 5 - -#define AW_NR580_GPIO_BTN_WPS 3 -#define AW_NR580_GPIO_BTN_RESET 11 - -#define AW_NR580_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AW_NR580_KEYS_DEBOUNCE_INTERVAL (3 * AW_NR580_KEYS_POLL_INTERVAL) - -static struct gpio_led aw_nr580_leds_gpio[] __initdata = { - { - .name = "aw-nr580:red:ready", - .gpio = AW_NR580_GPIO_LED_READY_RED, - .active_low = 0, - }, { - .name = "aw-nr580:green:ready", - .gpio = AW_NR580_GPIO_LED_READY_GREEN, - .active_low = 0, - }, { - .name = "aw-nr580:green:wps", - .gpio = AW_NR580_GPIO_LED_WPS_GREEN, - .active_low = 0, - }, { - .name = "aw-nr580:amber:wps", - .gpio = AW_NR580_GPIO_LED_WPS_AMBER, - .active_low = 0, - }, { - .name = "aw-nr580:green:wlan", - .gpio = AW_NR580_GPIO_LED_WLAN, - .active_low = 0, - } -}; - -static struct gpio_keys_button aw_nr580_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL, - .gpio = AW_NR580_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL, - .gpio = AW_NR580_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static const char *aw_nr580_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data aw_nr580_flash_data = { - .part_probes = aw_nr580_part_probes, -}; - -static void __init aw_nr580_setup(void) -{ - ath79_register_mdio(0, 0x0); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - - ath79_register_pci(); - - ath79_register_m25p80(&aw_nr580_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio), - aw_nr580_leds_gpio); - - ath79_register_gpio_keys_polled(-1, AW_NR580_KEYS_POLL_INTERVAL, - ARRAY_SIZE(aw_nr580_gpio_keys), - aw_nr580_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_AW_NR580, "AW-NR580", "AzureWave AW-NR580", - aw_nr580_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-bhr-4grv2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-bhr-4grv2.c deleted file mode 100644 index 1630845cf8..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-bhr-4grv2.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Buffalo BHR-4GRV2 board support - * - * Copyright (c) 2012 Qualcomm Atheros - * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com> - * - * Based on mach-ap136.c and mach-wzr-450hp2.c - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -#define BHR_4GRV2_GPIO_LED_VPN_RED 3 -#define BHR_4GRV2_GPIO_LED_VPN_GREEN 18 -#define BHR_4GRV2_GPIO_LED_POWER_GREEN 19 -#define BHR_4GRV2_GPIO_LED_DIAG_RED 20 - -#define BHR_4GRV2_GPIO_BTN_RESET 17 -#define BHR_4GRV2_GPIO_BTN_ECO 21 - -#define BHR_4GRV2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL (3 * BHR_4GRV2_KEYS_POLL_INTERVAL) -#define BHR_4GRV2_MAC0_OFFSET 0 -#define BHR_4GRV2_MAC1_OFFSET 6 - -static struct gpio_led bhr_4grv2_leds_gpio[] __initdata = { - { - .name = "buffalo:red:vpn", - .gpio = BHR_4GRV2_GPIO_LED_VPN_RED, - .active_low = 1, - }, - { - .name = "buffalo:green:vpn", - .gpio = BHR_4GRV2_GPIO_LED_VPN_GREEN, - .active_low = 1, - }, - { - .name = "buffalo:green:power", - .gpio = BHR_4GRV2_GPIO_LED_POWER_GREEN, - .active_low = 1, - }, - { - .name = "buffalo:red:diag", - .gpio = BHR_4GRV2_GPIO_LED_DIAG_RED, - .active_low = 1, - } -}; - -static struct gpio_keys_button bhr_4grv2_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL, - .gpio = BHR_4GRV2_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "ECO button", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL, - .gpio = BHR_4GRV2_GPIO_BTN_ECO, - .active_low = 1, - }, -}; - -/* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */ -static struct ar8327_pad_cfg bhr_4grv2_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -/* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */ -static struct ar8327_pad_cfg bhr_4grv2_ar8327_pad6_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_platform_data bhr_4grv2_ar8327_data = { - .pad0_cfg = &bhr_4grv2_ar8327_pad0_cfg, - .pad6_cfg = &bhr_4grv2_ar8327_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .port6_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info bhr_4grv2_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &bhr_4grv2_ar8327_data, - }, -}; - -static void __init bhr_4grv2_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(bhr_4grv2_leds_gpio), - bhr_4grv2_leds_gpio); - ath79_register_gpio_keys_polled(-1, BHR_4GRV2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(bhr_4grv2_gpio_keys), - bhr_4grv2_gpio_keys); - - mdiobus_register_board_info(bhr_4grv2_mdio0_info, - ARRAY_SIZE(bhr_4grv2_mdio0_info)); - ath79_register_mdio(0, 0x0); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - /* GMAC0 is connected to the RGMII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x56000000; - - ath79_init_mac(ath79_eth0_data.mac_addr, art + BHR_4GRV2_MAC0_OFFSET, 0); - ath79_register_eth(0); - - /* GMAC1 is connected to the SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_pll_data.pll_1000 = 0x03000101; - - ath79_init_mac(ath79_eth1_data.mac_addr, art + BHR_4GRV2_MAC1_OFFSET, 0); - ath79_register_eth(1); -} - -MIPS_MACHINE(ATH79_MACH_BHR_4GRV2, "BHR-4GRV2", - "Buffalo BHR-4GRV2", bhr_4grv2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-bhu-bxu2000n2-a.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-bhu-bxu2000n2-a.c deleted file mode 100644 index 8d7c6112d7..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-bhu-bxu2000n2-a.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * BHU BXU2000n-2 A1 board support - * - * Copyright (C) 2013 Terry Yang <yangbo@bhunetworks.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define BHU_BXU2000N2_A1_GPIO_LED_WLAN 13 -#define BHU_BXU2000N2_A1_GPIO_LED_WAN 19 -#define BHU_BXU2000N2_A1_GPIO_LED_LAN 21 -#define BHU_BXU2000N2_A1_GPIO_LED_SYSTEM 14 - -#define BHU_BXU2000N2_A1_GPIO_BTN_RESET 17 - -#define BHU_BXU2000N2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define BHU_BXU2000N2_KEYS_DEBOUNCE_INTERVAL \ - (3 * BHU_BXU2000N2_KEYS_POLL_INTERVAL) - -static const char *bhu_bxu2000n2_part_probes[] = { - "cmdlinepart", - NULL, -}; - -static struct flash_platform_data bhu_bxu2000n2_flash_data = { - .part_probes = bhu_bxu2000n2_part_probes, -}; - -static struct gpio_led bhu_bxu2000n2_a1_leds_gpio[] __initdata = { - { - .name = "bhu:green:status", - .gpio = BHU_BXU2000N2_A1_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "bhu:green:lan", - .gpio = BHU_BXU2000N2_A1_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "bhu:green:wan", - .gpio = BHU_BXU2000N2_A1_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "bhu:green:wlan", - .gpio = BHU_BXU2000N2_A1_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button bhu_bxu2000n2_a1_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = BHU_BXU2000N2_KEYS_DEBOUNCE_INTERVAL, - .gpio = BHU_BXU2000N2_A1_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init bhu_ap123_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(&bhu_bxu2000n2_flash_data); - - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - - /* GMAC0 is connected to the PHY4 of the internal switch */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(4); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_register_eth(0); - - /* GMAC1 is connected to the internal switch. Only use PHY3 */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.phy_mask = BIT(3); - ath79_register_eth(1); - - ath79_register_wmac(ee, ee+2); -} - -static void __init bhu_bxu2000n2_a1_setup(void) -{ - bhu_ap123_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(bhu_bxu2000n2_a1_leds_gpio), - bhu_bxu2000n2_a1_leds_gpio); - - ath79_register_gpio_keys_polled(1, BHU_BXU2000N2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(bhu_bxu2000n2_a1_gpio_keys), - bhu_bxu2000n2_a1_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_BHU_BXU2000N2_A1, "BXU2000n-2-A1", - "BHU BXU2000n-2 rev. A1", - bhu_bxu2000n2_a1_setup); - diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-bsb.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-bsb.c deleted file mode 100644 index 9f9be02eb3..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-bsb.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Smart Electronics Black Swift board support - * - * Copyright (C) 2014 Dmitriy Zherebkov dzh@black-swift.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define BSB_GPIO_LED_SYS 27 - -#define BSB_GPIO_BTN_RESET 11 - -#define BSB_KEYS_POLL_INTERVAL 20 /* msecs */ -#define BSB_KEYS_DEBOUNCE_INTERVAL (3 * BSB_KEYS_POLL_INTERVAL) - -#define BSB_MAC_OFFSET 0x0000 -#define BSB_CALDATA_OFFSET 0x1000 - -static struct gpio_led bsb_leds_gpio[] __initdata = { - { - .name = "bsb:red:sys", - .gpio = BSB_GPIO_LED_SYS, - .active_low = 1, - } -}; - -static struct gpio_keys_button bsb_gpio_keys[] __initdata = { - { - .desc = "reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = BSB_KEYS_DEBOUNCE_INTERVAL, - .gpio = BSB_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static void __init bsb_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ - ath79_setup_ar933x_phy4_switch(false,false); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(bsb_leds_gpio), - bsb_leds_gpio); - ath79_register_gpio_keys_polled(-1, BSB_KEYS_POLL_INTERVAL, - ARRAY_SIZE(bsb_gpio_keys), - bsb_gpio_keys); - - ath79_register_usb(); - - ath79_register_m25p80(NULL); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + BSB_MAC_OFFSET, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, art + BSB_MAC_OFFSET, 2); - - ath79_register_mdio(0, 0x0); - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_wmac(art + BSB_CALDATA_OFFSET, - art + BSB_MAC_OFFSET); -} - -MIPS_MACHINE(ATH79_MACH_BSB, "BSB", "Smart Electronics Black Swift board", - bsb_setup); - diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-c55.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-c55.c deleted file mode 100644 index 8aa5ecb6a8..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-c55.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * AirTight Networks C-55 board support - * - * Copyright (C) 2014-2015 Chris Blake <chrisrblake93@gmail.com> - * - * Based on Senao CAP4200AG board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define C55_GPIO_LED_PWR_GREEN 12 -#define C55_GPIO_LED_PWR_AMBER 13 -#define C55_GPIO_LED_LAN_GREEN 14 -#define C55_GPIO_LED_LAN_AMBER 15 -#define C55_GPIO_LED_WLAN_GREEN 18 -#define C55_GPIO_LED_WLAN_AMBER 19 - -#define C55_GPIO_BTN_RESET 17 - -#define C55_KEYS_POLL_INTERVAL 20 /* msecs */ -#define C55_KEYS_DEBOUNCE_INTERVAL (3 * C55_KEYS_POLL_INTERVAL) - -#define C55_MAC_OFFSET 0 -#define C55_WMAC_CALDATA_OFFSET 0x1000 -#define C55_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led c55_leds_gpio[] __initdata = { - { - .name = "c-55:green:pwr", - .gpio = C55_GPIO_LED_PWR_GREEN, - .active_low = 1, - }, - { - .name = "c-55:amber:pwr", - .gpio = C55_GPIO_LED_PWR_AMBER, - .active_low = 1, - }, - { - .name = "c-55:green:lan", - .gpio = C55_GPIO_LED_LAN_GREEN, - .active_low = 1, - }, - { - .name = "c-55:amber:lan", - .gpio = C55_GPIO_LED_LAN_AMBER, - .active_low = 1, - }, - { - .name = "c-55:green:wlan", - .gpio = C55_GPIO_LED_WLAN_GREEN, - .active_low = 1, - }, - { - .name = "c-55:amber:wlan", - .gpio = C55_GPIO_LED_WLAN_AMBER, - .active_low = 1, - }, -}; - -static struct gpio_keys_button c55_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = C55_KEYS_DEBOUNCE_INTERVAL, - .gpio = C55_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static void __init c55_setup(void) -{ - /* SPI Storage*/ - ath79_register_m25p80(NULL); - - /* MDIO Interface */ - ath79_register_mdio(0, 0x0); - - /* AR8035-A Ethernet */ - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | - AR934X_ETH_CFG_SW_ONLY_MODE); - ath79_init_mac(ath79_eth0_data.mac_addr, NULL, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_register_eth(0); - - /* LEDs & GPIO */ - ath79_gpio_output_select(C55_GPIO_LED_LAN_GREEN, - AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(C55_GPIO_LED_LAN_AMBER, - AR934X_GPIO_OUT_GPIO); - ath79_register_leds_gpio(-1, ARRAY_SIZE(c55_leds_gpio), - c55_leds_gpio); - ath79_register_gpio_keys_polled(-1, C55_KEYS_POLL_INTERVAL, - ARRAY_SIZE(c55_gpio_keys), - c55_gpio_keys); - - /* WiFi */ - ath79_wmac_disable_2ghz(); - ath79_register_wmac_simple(); - ap91_pci_init_simple(); - -} -MIPS_MACHINE(ATH79_MACH_C55, "C-55", "AirTight Networks C-55", - c55_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-c60.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-c60.c deleted file mode 100644 index bccf2e5873..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-c60.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - * AirTight Networks C-60 board support - * - * Copyright (C) 2016 Christian Lamparter <chunkeey@googlemail.com> - * - * Based on AirTight Networks C-55 board support - * - * Copyright (C) 2014-2015 Chris Blake <chrisrblake93@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/version.h> -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/mtd/mtd.h> -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0) -#include <linux/mtd/nand.h> -#else -#include <linux/mtd/rawnand.h> -#endif -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/platform_device.h> -#include <linux/platform/ar934x_nfc.h> -#include <linux/ar8216_platform.h> -#include <linux/ath9k_platform.h> -#include <linux/version.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-wmac.h" -#include "dev-usb.h" -#include "dev-nfc.h" -#include "machtypes.h" - -#define C60_GPIO_LED_PWR_AMBER 11 -#define C60_GPIO_LED_WLAN2_GREEN 12 -#define C60_GPIO_LED_WLAN2_AMBER 13 -#define C60_GPIO_LED_PWR_GREEN 16 - -#define C60_GPIO_BTN_RESET 17 - -/* GPIOs of the AR9300 PCIe chip */ -#define C60_GPIO_WMAC_LED_WLAN1_AMBER 0 -#define C60_GPIO_WMAC_LED_WLAN1_GREEN 3 - -#define C60_KEYS_POLL_INTERVAL 20 /* msecs */ -#define C60_KEYS_DEBOUNCE_INTERVAL (3 * C60_KEYS_POLL_INTERVAL) - -#define C60_ART_ADDR 0x1f7f0000 -#define C60_ART_SIZE 0xffff -#define C60_MAC_OFFSET 0 -#define C60_WMAC_CALDATA_OFFSET 0x1000 -#define C60_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led c60_leds_gpio[] __initdata = { - { - .name = "c-60:amber:pwr", - .gpio = C60_GPIO_LED_PWR_AMBER, - .active_low = 1, - }, - { - .name = "c-60:green:pwr", - .gpio = C60_GPIO_LED_PWR_GREEN, - .active_low = 1, - }, - { - .name = "c-60:green:wlan2", - .gpio = C60_GPIO_LED_WLAN2_GREEN, - .active_low = 1, - }, - { - .name = "c-60:amber:wlan2", - .gpio = C60_GPIO_LED_WLAN2_AMBER, - .active_low = 1, - }, -}; - -static struct gpio_keys_button c60_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = C60_KEYS_DEBOUNCE_INTERVAL, - .gpio = C60_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg c60_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_platform_data c60_ar8327_data = { - .pad0_cfg = &c60_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - } -}; - -static struct mdio_board_info c60_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &c60_ar8327_data, - }, -}; - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) -static struct nand_ecclayout c60_nand_ecclayout = { - .eccbytes = 7, - .eccpos = { 4, 8, 9, 10, 13, 14, 15 }, - .oobavail = 9, - .oobfree = { { 0, 3 }, { 6, 2 }, { 11, 2 }, } -}; - -#else - -static int c60_ooblayout_ecc(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - switch (section) { - case 0: - oobregion->offset = 4; - oobregion->length = 1; - return 0; - case 1: - oobregion->offset = 8; - oobregion->length = 3; - return 0; - case 2: - oobregion->offset = 13; - oobregion->length = 3; - return 0; - default: - return -ERANGE; - } -} - -static int c60_ooblayout_free(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - switch (section) { - case 0: - oobregion->offset = 0; - oobregion->length = 3; - return 0; - case 1: - oobregion->offset = 6; - oobregion->length = 2; - return 0; - case 2: - oobregion->offset = 11; - oobregion->length = 2; - return 0; - default: - return -ERANGE; - } -} - -static const struct mtd_ooblayout_ops c60_nand_ecclayout_ops = { - .ecc = c60_ooblayout_ecc, - .free = c60_ooblayout_free, -}; -#endif /* < 4.6 */ - -static int c60_nand_scan_fixup(struct mtd_info *mtd) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - struct nand_chip *chip = mtd->priv; -#else - struct nand_chip *chip = mtd_to_nand(mtd); -#endif - - chip->ecc.size = 512; - chip->ecc.strength = 4; -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - chip->ecc.layout = &c60_nand_ecclayout; -#else - mtd_set_ooblayout(mtd, &c60_nand_ecclayout_ops); -#endif - return 0; -} - -static struct gpio_led c60_wmac0_leds_gpio[] = { - { - .name = "c-60:amber:wlan1", - .gpio = C60_GPIO_WMAC_LED_WLAN1_AMBER, - .active_low = 1, - }, - { - .name = "c-60:green:wlan1", - .gpio = C60_GPIO_WMAC_LED_WLAN1_GREEN, - .active_low = 1, - }, -}; - -static void __init c60_setup(void) -{ - u8 tmpmac[6]; - u8 *art = (u8 *) KSEG1ADDR(C60_ART_ADDR); - - /* NAND */ - ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_SOFT_BCH); - ath79_nfc_set_scan_fixup(c60_nand_scan_fixup); - ath79_register_nfc(); - - /* SPI Storage*/ - ath79_register_m25p80(NULL); - - /* AR8327 Switch Ethernet */ - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); - - mdiobus_register_board_info(c60_mdio0_info, - ARRAY_SIZE(c60_mdio0_info)); - - ath79_register_mdio(0, 0x0); - - /* GMAC0 is connected to an AR8327N switch */ - ath79_init_mac(ath79_eth0_data.mac_addr, art + C60_MAC_OFFSET, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_register_eth(0); - - /* LEDs & GPIO */ - ath79_register_leds_gpio(-1, ARRAY_SIZE(c60_leds_gpio), - c60_leds_gpio); - ath79_register_gpio_keys_polled(-1, C60_KEYS_POLL_INTERVAL, - ARRAY_SIZE(c60_gpio_keys), - c60_gpio_keys); - ap9x_pci_setup_wmac_leds(0, c60_wmac0_leds_gpio, - ARRAY_SIZE(c60_wmac0_leds_gpio)); - /* USB */ - ath79_register_usb(); - - /* WiFi */ - ath79_init_mac(tmpmac, art + C60_MAC_OFFSET, 1); - ap91_pci_init(art + C60_PCIE_CALDATA_OFFSET, tmpmac); - ath79_init_mac(tmpmac, art + C60_MAC_OFFSET, 2); - ath79_register_wmac(art + C60_WMAC_CALDATA_OFFSET, tmpmac); -} -MIPS_MACHINE(ATH79_MACH_C60, "C-60", "AirTight Networks C-60", - c60_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cap324.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cap324.c deleted file mode 100644 index dffbb81bd4..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cap324.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * PowerCloud Systems CAP324 board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2012-2013 PowerCloud Systems - * Copyright (C) 2015 Daniel Dickinson - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define CAP324_GPIO_LED_POWER_GREEN 12 -#define CAP324_GPIO_LED_POWER_AMBER 13 -#define CAP324_GPIO_LED_LAN_GREEN 14 -#define CAP324_GPIO_LED_LAN_AMBER 15 -#define CAP324_GPIO_LED_WLAN_GREEN 18 -#define CAP324_GPIO_LED_WLAN_AMBER 19 - -#define CAP324_GPIO_BTN_RESET 17 - -#define CAP324_KEYS_POLL_INTERVAL 20 /* msecs */ -#define CAP324_KEYS_DEBOUNCE_INTERVAL (3 * CAP324_KEYS_POLL_INTERVAL) - -#define CAP324_MAC_OFFSET 0 -#define CAP324_WMAC_CALDATA_OFFSET 0x1000 -#define CAP324_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led cap324_leds_gpio[] __initdata = { - { - .name = "pcs:green:power", - .gpio = CAP324_GPIO_LED_POWER_GREEN, - .active_low = 1, - }, - { - .name = "pcs:amber:power", - .gpio = CAP324_GPIO_LED_POWER_AMBER, - .active_low = 1, - }, - { - .name = "pcs:green:lan", - .gpio = CAP324_GPIO_LED_LAN_GREEN, - .active_low = 1, - }, - { - .name = "pcs:amber:lan", - .gpio = CAP324_GPIO_LED_LAN_AMBER, - .active_low = 1, - }, - { - .name = "pcs:green:wlan", - .gpio = CAP324_GPIO_LED_WLAN_GREEN, - .active_low = 1, - }, - { - .name = "pcs:amber:wlan", - .gpio = CAP324_GPIO_LED_WLAN_AMBER, - .active_low = 1, - }, -}; - -static struct gpio_keys_button cap324_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = CAP324_KEYS_DEBOUNCE_INTERVAL, - .gpio = CAP324_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static void __init cap324_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 mac[6]; - - ath79_gpio_output_select(CAP324_GPIO_LED_LAN_GREEN, - AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(CAP324_GPIO_LED_LAN_AMBER, - AR934X_GPIO_OUT_GPIO); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cap324_leds_gpio), - cap324_leds_gpio); - ath79_register_gpio_keys_polled(-1, CAP324_KEYS_POLL_INTERVAL, - ARRAY_SIZE(cap324_gpio_keys), - cap324_gpio_keys); - - ath79_init_mac(mac, art + CAP324_MAC_OFFSET, -2); - ath79_wmac_disable_2ghz(); - ath79_register_wmac(art + CAP324_WMAC_CALDATA_OFFSET, mac); - - ath79_init_mac(mac, art + CAP324_MAC_OFFSET, -1); - ap91_pci_init(art + CAP324_PCIE_CALDATA_OFFSET, mac); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | - AR934X_ETH_CFG_SW_ONLY_MODE); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, - art + CAP324_MAC_OFFSET, 0); - - /* GMAC0 is connected to an external PHY */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_CAP324, "CAP324", "PowerCloud Systems CAP324", - cap324_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cap4200ag.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cap4200ag.c deleted file mode 100644 index 18944c40fa..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cap4200ag.c +++ /dev/null @@ -1,131 +0,0 @@ -/* - * Senao CAP4200AG board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define CAP4200AG_GPIO_LED_PWR_GREEN 12 -#define CAP4200AG_GPIO_LED_PWR_AMBER 13 -#define CAP4200AG_GPIO_LED_LAN_GREEN 14 -#define CAP4200AG_GPIO_LED_LAN_AMBER 15 -#define CAP4200AG_GPIO_LED_WLAN_GREEN 18 -#define CAP4200AG_GPIO_LED_WLAN_AMBER 19 - -#define CAP4200AG_GPIO_BTN_RESET 17 - -#define CAP4200AG_KEYS_POLL_INTERVAL 20 /* msecs */ -#define CAP4200AG_KEYS_DEBOUNCE_INTERVAL (3 * CAP4200AG_KEYS_POLL_INTERVAL) - -#define CAP4200AG_MAC_OFFSET 0 -#define CAP4200AG_WMAC_CALDATA_OFFSET 0x1000 -#define CAP4200AG_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led cap4200ag_leds_gpio[] __initdata = { - { - .name = "senao:green:pwr", - .gpio = CAP4200AG_GPIO_LED_PWR_GREEN, - .active_low = 1, - }, - { - .name = "senao:amber:pwr", - .gpio = CAP4200AG_GPIO_LED_PWR_AMBER, - .active_low = 1, - }, - { - .name = "senao:green:lan", - .gpio = CAP4200AG_GPIO_LED_LAN_GREEN, - .active_low = 1, - }, - { - .name = "senao:amber:lan", - .gpio = CAP4200AG_GPIO_LED_LAN_AMBER, - .active_low = 1, - }, - { - .name = "senao:green:wlan", - .gpio = CAP4200AG_GPIO_LED_WLAN_GREEN, - .active_low = 1, - }, - { - .name = "senao:amber:wlan", - .gpio = CAP4200AG_GPIO_LED_WLAN_AMBER, - .active_low = 1, - }, -}; - -static struct gpio_keys_button cap4200ag_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = CAP4200AG_KEYS_DEBOUNCE_INTERVAL, - .gpio = CAP4200AG_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static void __init cap4200ag_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 mac[6]; - - ath79_gpio_output_select(CAP4200AG_GPIO_LED_LAN_GREEN, - AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(CAP4200AG_GPIO_LED_LAN_AMBER, - AR934X_GPIO_OUT_GPIO); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cap4200ag_leds_gpio), - cap4200ag_leds_gpio); - ath79_register_gpio_keys_polled(-1, CAP4200AG_KEYS_POLL_INTERVAL, - ARRAY_SIZE(cap4200ag_gpio_keys), - cap4200ag_gpio_keys); - - ath79_init_mac(mac, art + CAP4200AG_MAC_OFFSET, -1); - ath79_wmac_disable_2ghz(); - ath79_register_wmac(art + CAP4200AG_WMAC_CALDATA_OFFSET, mac); - - ath79_init_mac(mac, art + CAP4200AG_MAC_OFFSET, -2); - ap91_pci_init(art + CAP4200AG_PCIE_CALDATA_OFFSET, mac); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | - AR934X_ETH_CFG_SW_ONLY_MODE); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, - art + CAP4200AG_MAC_OFFSET, -2); - - /* GMAC0 is connected to an external PHY */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_CAP4200AG, "CAP4200AG", "Senao CAP4200AG", - cap4200ag_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-carambola2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-carambola2.c deleted file mode 100644 index babe101141..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-carambola2.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * 8devices Carambola2 board support - * - * Copyright (C) 2013 Darius Augulis <darius@8devices.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define CARAMBOLA2_GPIO_LED_WLAN 0 -#define CARAMBOLA2_GPIO_LED_ETH0 14 -#define CARAMBOLA2_GPIO_LED_ETH1 13 - -#define CARAMBOLA2_GPIO_BTN_JUMPSTART 11 - -#define CARAMBOLA2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define CARAMBOLA2_KEYS_DEBOUNCE_INTERVAL (3 * CARAMBOLA2_KEYS_POLL_INTERVAL) - -#define CARAMBOLA2_MAC0_OFFSET 0x0000 -#define CARAMBOLA2_MAC1_OFFSET 0x0006 -#define CARAMBOLA2_CALDATA_OFFSET 0x1000 -#define CARAMBOLA2_WMAC_MAC_OFFSET 0x1002 - -static struct gpio_led carambola2_leds_gpio[] __initdata = { - { - .name = "carambola2:green:wlan", - .gpio = CARAMBOLA2_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "carambola2:orange:eth0", - .gpio = CARAMBOLA2_GPIO_LED_ETH0, - .active_low = 0, - }, { - .name = "carambola2:orange:eth1", - .gpio = CARAMBOLA2_GPIO_LED_ETH1, - .active_low = 0, - } -}; - -static struct gpio_keys_button carambola2_gpio_keys[] __initdata = { - { - .desc = "jumpstart button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = CARAMBOLA2_KEYS_DEBOUNCE_INTERVAL, - .gpio = CARAMBOLA2_GPIO_BTN_JUMPSTART, - .active_low = 1, - }, -}; - -static void __init carambola2_common_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - ath79_register_wmac(art + CARAMBOLA2_CALDATA_OFFSET, - art + CARAMBOLA2_WMAC_MAC_OFFSET); - - ath79_setup_ar933x_phy4_switch(true, true); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + CARAMBOLA2_MAC0_OFFSET, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, art + CARAMBOLA2_MAC1_OFFSET, 0); - - ath79_register_mdio(0, 0x0); - - /* LAN ports */ - ath79_register_eth(1); - - /* WAN port */ - ath79_register_eth(0); -} - -static void __init carambola2_setup(void) -{ - carambola2_common_setup(); - - ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(carambola2_leds_gpio), - carambola2_leds_gpio); - ath79_register_gpio_keys_polled(-1, CARAMBOLA2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(carambola2_gpio_keys), - carambola2_gpio_keys); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_CARAMBOLA2, "CARAMBOLA2", "8devices Carambola2 board", - carambola2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c deleted file mode 100644 index 82174ba935..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c +++ /dev/null @@ -1,765 +0,0 @@ -/* - * Support for COMFAST boards: - * - CF-E316N v2 (AR9341) - * - CF-E320N v2 (QCA9531) - * - CF-E355AC v1 (QCA9531 + QCA9882) - * - CF-E355AC v2 (QCA9531 + QCA9886) - * - CF-E375AC (QCA9563 + QCA9886 + QCA8337) - * - CF-E380AC v1/v2 (QCA9558) - * - CF-E385AC (QCA9558 + QCA9984 + QCA8337) - * - CF-E520N/CF-E530N (QCA9531) - * - * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com> - * Copyright (C) 2016 Gareth Parker <gareth41@orcon.net.nz> - * Copyright (C) 2015 Paul Fertser <fercerpav@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/ar8216_platform.h> -#include <linux/platform_data/phy-at803x.h> -#include <linux/platform_device.h> -#include <linux/timer.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -#define CF_EXXXN_KEYS_POLL_INTERVAL 20 -#define CF_EXXXN_KEYS_DEBOUNCE_INTERVAL (3 * CF_EXXXN_KEYS_POLL_INTERVAL) - -/* CF-E316N v2 */ -#define CF_E316N_V2_GPIO_LED_DIAG_B 0 -#define CF_E316N_V2_GPIO_LED_DIAG_R 2 -#define CF_E316N_V2_GPIO_LED_DIAG_G 3 -#define CF_E316N_V2_GPIO_LED_WLAN 12 -#define CF_E316N_V2_GPIO_LED_WAN 17 -#define CF_E316N_V2_GPIO_LED_LAN 19 - -#define CF_E316N_V2_GPIO_EXT_WDT 16 - -#define CF_E316N_V2_GPIO_EXTERNAL_PA0 13 -#define CF_E316N_V2_GPIO_EXTERNAL_PA1 14 - -#define CF_E316N_V2_GPIO_BTN_RESET 20 - -static struct gpio_led cf_e316n_v2_leds_gpio[] __initdata = { - { - .name = "cf-e316n-v2:blue:diag", - .gpio = CF_E316N_V2_GPIO_LED_DIAG_B, - .active_low = 0, - }, { - .name = "cf-e316n-v2:red:diag", - .gpio = CF_E316N_V2_GPIO_LED_DIAG_R, - .active_low = 0, - }, { - .name = "cf-e316n-v2:green:diag", - .gpio = CF_E316N_V2_GPIO_LED_DIAG_G, - .active_low = 0, - }, { - .name = "cf-e316n-v2:blue:wlan", - .gpio = CF_E316N_V2_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "cf-e316n-v2:blue:wan", - .gpio = CF_E316N_V2_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "cf-e316n-v2:blue:lan", - .gpio = CF_E316N_V2_GPIO_LED_LAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button cf_e316n_v2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL, - .gpio = CF_E316N_V2_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -/* CF-E320N v2 */ -#define CF_E320N_V2_GPIO_LED_WLAN 0 -#define CF_E320N_V2_GPIO_LED_WAN 2 -#define CF_E320N_V2_GPIO_LED_LAN 3 - -#define CF_E320N_V2_GPIO_HEADER_J9_1 14 -#define CF_E320N_V2_GPIO_HEADER_J9_2 12 -#define CF_E320N_V2_GPIO_HEADER_J9_3 11 -#define CF_E320N_V2_GPIO_HEADER_J9_4 16 - -#define CF_E320N_V2_GPIO_EXT_WDT 13 - -#define CF_E320N_V2_GPIO_BTN_RESET 17 - -static struct gpio_led cf_e320n_v2_leds_gpio[] __initdata = { - { - .name = "cf-e320n-v2:green:lan", - .gpio = CF_E320N_V2_GPIO_LED_LAN, - .active_low = 0, - }, { - .name = "cf-e320n-v2:red:wan", - .gpio = CF_E320N_V2_GPIO_LED_WAN, - .active_low = 0, - }, { - .name = "cf-e320n-v2:blue:wlan", - .gpio = CF_E320N_V2_GPIO_LED_WLAN, - .active_low = 0, - }, -}; - -static struct gpio_keys_button cf_e320n_v2_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL, - .gpio = CF_E320N_V2_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -/* CF-E355AC v1/v2 */ -#define CF_E355AC_GPIO_LED_LAN 3 -#define CF_E355AC_GPIO_LED_WLAN2G 0 -#define CF_E355AC_GPIO_LED_WLAN5G 2 - -#define CF_E355AC_GPIO_EXT_WDT 13 - -#define CF_E355AC_GPIO_BTN_RESET 17 - -static struct gpio_led cf_e355ac_v1_leds_gpio[] __initdata = { - { - .name = "cf-e355ac-v1:green:lan", - .gpio = CF_E355AC_GPIO_LED_LAN, - .active_low = 0, - }, { - .name = "cf-e355ac-v1:blue:wlan2g", - .gpio = CF_E355AC_GPIO_LED_WLAN2G, - .active_low = 0, - }, { - .name = "cf-e355ac-v1:red:wlan5g", - .gpio = CF_E355AC_GPIO_LED_WLAN5G, - .active_low = 0, - }, -}; - -static struct gpio_led cf_e355ac_v2_leds_gpio[] __initdata = { - { - .name = "cf-e355ac-v2:green:lan", - .gpio = CF_E355AC_GPIO_LED_LAN, - .active_low = 0, - }, { - .name = "cf-e355ac-v2:blue:wlan2g", - .gpio = CF_E355AC_GPIO_LED_WLAN2G, - .active_low = 0, - }, { - .name = "cf-e355ac-v2:red:wlan5g", - .gpio = CF_E355AC_GPIO_LED_WLAN5G, - .active_low = 0, - }, -}; - -static struct gpio_keys_button cf_e355ac_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL, - .gpio = CF_E355AC_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -/* CF-E375AC */ -#define CF_E375AC_GPIO_LED_LAN 17 -#define CF_E375AC_GPIO_LED_WLAN2G 16 -#define CF_E375AC_GPIO_LED_WLAN5G 15 - -#define CF_E375AC_GPIO_EXT_WDT 6 - -#define CF_E375AC_GPIO_BTN_RESET 2 - -static struct gpio_led cf_e375ac_leds_gpio[] __initdata = { - { - .name = "cf-e375ac:green:lan", - .gpio = CF_E375AC_GPIO_LED_LAN, - .active_low = 0, - }, { - .name = "cf-e375ac:red:wlan5g", - .gpio = CF_E375AC_GPIO_LED_WLAN5G, - .active_low = 0, - }, { - .name = "cf-e375ac:blue:wlan2g", - .gpio = CF_E375AC_GPIO_LED_WLAN2G, - .active_low = 0, - }, -}; - -static struct gpio_keys_button cf_e375ac_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL, - .gpio = CF_E375AC_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg cf_e375ac_ar8337_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -static struct ar8327_platform_data cf_e375ac_ar8337_data = { - .pad0_cfg = &cf_e375ac_ar8337_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info cf_e375ac_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &cf_e375ac_ar8337_data, - }, -}; - -/* CF-E380AC v1/v2, CF-E385AC */ -#define CF_E38XAC_GPIO_LED_LAN 0 -#define CF_E38XAC_GPIO_LED_WLAN2G 2 -#define CF_E38XAC_GPIO_LED_WLAN5G 3 - -#define CF_E38XAC_GPIO_EXT_WDT 17 - -#define CF_E38XAC_GPIO_BTN_RESET 19 - -static struct gpio_led cf_e380ac_v1_leds_gpio[] __initdata = { - { - .name = "cf-e380ac-v1:green:lan", - .gpio = CF_E38XAC_GPIO_LED_LAN, - .active_low = 0, - }, { - .name = "cf-e380ac-v1:blue:wlan2g", - .gpio = CF_E38XAC_GPIO_LED_WLAN2G, - .active_low = 0, - }, { - .name = "cf-e380ac-v1:red:wlan5g", - .gpio = CF_E38XAC_GPIO_LED_WLAN5G, - .active_low = 0, - }, -}; - -static struct gpio_led cf_e380ac_v2_leds_gpio[] __initdata = { - { - .name = "cf-e380ac-v2:green:lan", - .gpio = CF_E38XAC_GPIO_LED_LAN, - .active_low = 0, - }, { - .name = "cf-e380ac-v2:blue:wlan2g", - .gpio = CF_E38XAC_GPIO_LED_WLAN2G, - .active_low = 0, - }, { - .name = "cf-e380ac-v2:red:wlan5g", - .gpio = CF_E38XAC_GPIO_LED_WLAN5G, - .active_low = 0, - }, -}; - -static struct gpio_led cf_e385ac_leds_gpio[] __initdata = { - { - .name = "cf-e385ac:green:lan", - .gpio = CF_E38XAC_GPIO_LED_LAN, - .active_low = 0, - }, { - .name = "cf-e385ac:blue:wlan2g", - .gpio = CF_E38XAC_GPIO_LED_WLAN2G, - .active_low = 0, - }, { - .name = "cf-e385ac:red:wlan5g", - .gpio = CF_E38XAC_GPIO_LED_WLAN5G, - .active_low = 0, - }, -}; - -static struct gpio_keys_button cf_e38xac_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL, - .gpio = CF_E38XAC_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct at803x_platform_data cf_e380ac_v1v2_at803x_data = { - .disable_smarteee = 1, -}; - -static struct mdio_board_info cf_e380ac_v1v2_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &cf_e380ac_v1v2_at803x_data, - }, -}; - -/* CF-E520N/CF-E530N */ -#define CF_E5X0N_GPIO_LED_WAN 11 -#define CF_E5X0N_GPIO_BTN_RESET 17 - -static struct gpio_led cf_e520n_leds_gpio[] __initdata = { - { - .name = "cf-e520n:blue:wan", - .gpio = CF_E5X0N_GPIO_LED_WAN, - .active_low = 1, - } -}; - -static struct gpio_led cf_e530n_leds_gpio[] __initdata = { - { - .name = "cf-e530n:blue:wan", - .gpio = CF_E5X0N_GPIO_LED_WAN, - .active_low = 1, - } -}; - -/* - * Some COMFAST devices include external hardware watchdog chip, - * Pericon Technology PT7A7514, connected to a selected GPIO - * and WiSoC RESET_L input. Watchdog time-out is ~1.6 s. - */ -#define CF_EXXXN_EXT_WDT_TIMEOUT_MS 500 - -static struct timer_list gpio_wdt_timer; - -static void gpio_wdt_toggle(unsigned long gpio) -{ - static int state; - - state = !state; - gpio_set_value(gpio, state); - - mod_timer(&gpio_wdt_timer, - jiffies + msecs_to_jiffies(CF_EXXXN_EXT_WDT_TIMEOUT_MS)); -} - -static void __init cf_exxxn_common_setup(unsigned long art_ofs, int gpio_wdt) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1f001000 + art_ofs); - - if (gpio_wdt > -1) { - gpio_request_one(gpio_wdt, GPIOF_OUT_INIT_HIGH, - "PT7A7514 watchdog"); - - setup_timer(&gpio_wdt_timer, gpio_wdt_toggle, gpio_wdt); - gpio_wdt_toggle(gpio_wdt); - } - - ath79_register_m25p80(NULL); - - ath79_register_wmac(art, NULL); - - ath79_register_usb(); -} - -static void __init cf_e316n_v2_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f010000); - - cf_exxxn_common_setup(0x10000, CF_E316N_V2_GPIO_EXT_WDT); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP); - - ath79_register_mdio(1, 0x0); - - /* GMAC0 is connected to the PHY0 of the internal switch */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_register_eth(0); - - /* GMAC1 is connected to the internal switch */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2); - ath79_register_eth(1); - - /* Enable 2x Skyworks SE2576L WLAN power amplifiers */ - gpio_request_one(CF_E316N_V2_GPIO_EXTERNAL_PA0, GPIOF_OUT_INIT_HIGH, - "WLAN PA0"); - gpio_request_one(CF_E316N_V2_GPIO_EXTERNAL_PA1, GPIOF_OUT_INIT_HIGH, - "WLAN PA1"); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e316n_v2_leds_gpio), - cf_e316n_v2_leds_gpio); - - ath79_register_gpio_keys_polled(1, CF_EXXXN_KEYS_POLL_INTERVAL, - ARRAY_SIZE(cf_e316n_v2_gpio_keys), - cf_e316n_v2_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_CF_E316N_V2, "CF-E316N-V2", "COMFAST CF-E316N v2", - cf_e316n_v2_setup); - -static void __init cf_exxxn_qca953x_eth_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f010000); - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_mdio(0, 0x0); - - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask |= BIT(4); - - /* LAN */ - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2); - ath79_register_eth(1); - - /* WAN */ - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.phy_mask = BIT(4); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_register_eth(0); -} - -static void __init cf_e320n_v2_setup(void) -{ - cf_exxxn_common_setup(0x10000, CF_E320N_V2_GPIO_EXT_WDT); - - cf_exxxn_qca953x_eth_setup(); - - /* Disable JTAG (enables GPIO0-3) */ - ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); - - ath79_gpio_direction_select(CF_E320N_V2_GPIO_LED_LAN, true); - ath79_gpio_direction_select(CF_E320N_V2_GPIO_LED_WAN, true); - ath79_gpio_direction_select(CF_E320N_V2_GPIO_LED_WLAN, true); - - ath79_gpio_output_select(CF_E320N_V2_GPIO_LED_LAN, 0); - ath79_gpio_output_select(CF_E320N_V2_GPIO_LED_WAN, 0); - ath79_gpio_output_select(CF_E320N_V2_GPIO_LED_WLAN, 0); - - /* Enable GPIO function for GPIOs in J9 header */ - ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_1, 0); - ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_2, 0); - ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_3, 0); - ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_4, 0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e320n_v2_leds_gpio), - cf_e320n_v2_leds_gpio); - - ath79_register_gpio_keys_polled(-1, CF_EXXXN_KEYS_POLL_INTERVAL, - ARRAY_SIZE(cf_e320n_v2_gpio_keys), - cf_e320n_v2_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_CF_E320N_V2, "CF-E320N-V2", "COMFAST CF-E320N v2", - cf_e320n_v2_setup); - -static void __init cf_e355ac_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1f010000); - - /* Disable JTAG, enabling GPIOs 0-3 */ - ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE, 0); - - cf_exxxn_common_setup(0x10000, CF_E355AC_GPIO_EXT_WDT); - - cf_exxxn_qca953x_eth_setup(); - - ath79_gpio_output_select(CF_E355AC_GPIO_LED_LAN, 0); - ath79_gpio_output_select(CF_E355AC_GPIO_LED_WLAN2G, 0); - ath79_gpio_output_select(CF_E355AC_GPIO_LED_WLAN5G, 0); - - ap91_pci_init(art + 0x5000, NULL); - - ath79_register_gpio_keys_polled(1, CF_EXXXN_KEYS_POLL_INTERVAL, - ARRAY_SIZE(cf_e355ac_gpio_keys), - cf_e355ac_gpio_keys); -} - -static void __init cf_e355ac_v1_setup(void) -{ - cf_e355ac_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e355ac_v1_leds_gpio), - cf_e355ac_v1_leds_gpio); -} - -static void __init cf_e355ac_v2_setup(void) -{ - cf_e355ac_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e355ac_v2_leds_gpio), - cf_e355ac_v2_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_CF_E355AC, "CF-E355AC-V1", "COMFAST CF-E355AC v1", - cf_e355ac_v1_setup); - -MIPS_MACHINE(ATH79_MACH_CF_E355AC_V2, "CF-E355AC-V2", "COMFAST CF-E355AC v2", - cf_e355ac_v2_setup); - -static void __init cf_e375ac_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f040000); - - /* Disable JTAG, enabling GPIOs 0-3 */ - ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE, 0); - - cf_exxxn_common_setup(0x40000, CF_E375AC_GPIO_EXT_WDT); - - ath79_gpio_output_select(CF_E375AC_GPIO_LED_LAN, 0); - ath79_gpio_output_select(CF_E375AC_GPIO_LED_WLAN2G, 0); - ath79_gpio_output_select(CF_E375AC_GPIO_LED_WLAN5G, 0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e375ac_leds_gpio), - cf_e375ac_leds_gpio); - - ath79_register_gpio_keys_polled(-1, CF_EXXXN_KEYS_POLL_INTERVAL, - ARRAY_SIZE(cf_e375ac_gpio_keys), - cf_e375ac_gpio_keys); - - platform_device_register(&ath79_mdio0_device); - - mdiobus_register_board_info(cf_e375ac_mdio0_info, - ARRAY_SIZE(cf_e375ac_mdio0_info)); - - /* GMAC0 is connected to an AR8337 switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_register_eth(0); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_CF_E375AC, "CF-E375AC", "COMFAST CF-E375AC", - cf_e375ac_setup); - -static void __init cf_e38xac_common_setup(unsigned long art_ofs) -{ - cf_exxxn_common_setup(art_ofs, CF_E38XAC_GPIO_EXT_WDT); - - ath79_register_pci(); - - /* Disable JTAG (enables GPIO0-3) */ - ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); - - ath79_gpio_direction_select(CF_E38XAC_GPIO_LED_LAN, true); - ath79_gpio_direction_select(CF_E38XAC_GPIO_LED_WLAN2G, true); - ath79_gpio_direction_select(CF_E38XAC_GPIO_LED_WLAN5G, true); - - ath79_gpio_output_select(CF_E38XAC_GPIO_LED_LAN, 0); - ath79_gpio_output_select(CF_E38XAC_GPIO_LED_WLAN2G, 0); - ath79_gpio_output_select(CF_E38XAC_GPIO_LED_WLAN5G, 0); - - /* For J7-4 */ - ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN); - - ath79_register_gpio_keys_polled(-1, CF_EXXXN_KEYS_POLL_INTERVAL, - ARRAY_SIZE(cf_e38xac_gpio_keys), - cf_e38xac_gpio_keys); -} - -static void __init cf_e380ac_v1v2_common_setup(unsigned long art_ofs) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f000000 + art_ofs); - - cf_e38xac_common_setup(art_ofs); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - ath79_register_mdio(0, 0x0); - mdiobus_register_board_info(cf_e380ac_v1v2_mdio0_info, - ARRAY_SIZE(cf_e380ac_v1v2_mdio0_info)); - - /* LAN */ - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_pll_data.pll_1000 = 0xbe000000; - ath79_eth0_pll_data.pll_100 = 0xb0000101; - ath79_eth0_pll_data.pll_10 = 0xb0001313; - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_register_eth(0); -} - -static void __init cf_e380ac_v1_setup(void) -{ - cf_e380ac_v1v2_common_setup(0x20000); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e380ac_v1_leds_gpio), - cf_e380ac_v1_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_CF_E380AC_V1, "CF-E380AC-V1", "COMFAST CF-E380AC v1", - cf_e380ac_v1_setup); - -static void __init cf_e380ac_v2_setup(void) -{ - cf_e380ac_v1v2_common_setup(0x40000); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e380ac_v2_leds_gpio), - cf_e380ac_v2_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_CF_E380AC_V2, "CF-E380AC-V2", "COMFAST CF-E380AC v2", - cf_e380ac_v2_setup); - -/* QCA8337 GMAC0 is connected with QCA9558 over RGMII */ -static struct ar8327_pad_cfg cf_e385ac_qca8337_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL1, -}; - -/* QCA8337 GMAC6 is connected with QCA9558 over SGMII */ -static struct ar8327_pad_cfg cf_e385ac_qca8337_pad6_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0, -}; - -static struct ar8327_platform_data cf_e385ac_qca8337_data = { - .pad0_cfg = &cf_e385ac_qca8337_pad0_cfg, - .pad6_cfg = &cf_e385ac_qca8337_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .port6_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info cf_e385ac_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &cf_e385ac_qca8337_data, - }, -}; - -static void __init cf_e385ac_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f040000); - - cf_e38xac_common_setup(0x40000); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e385ac_leds_gpio), - cf_e385ac_leds_gpio); - - mdiobus_register_board_info(cf_e385ac_mdio0_info, - ARRAY_SIZE(cf_e385ac_mdio0_info)); - ath79_register_mdio(0, 0x0); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - /* QCA9558 GMAC0 is connected to RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x96000000; - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_register_eth(0); - - /* QCA9558 GMAC1 is connected to SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_pll_data.pll_1000 = 0x03000101; - - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - ath79_register_eth(1); -} - -MIPS_MACHINE(ATH79_MACH_CF_E385AC, "CF-E385AC", "COMFAST CF-E385AC", - cf_e385ac_setup); - -static void __init cf_e5x0n_gpio_setup(void) -{ - ath79_gpio_direction_select(CF_E5X0N_GPIO_LED_WAN, true); - - ath79_gpio_output_select(CF_E5X0N_GPIO_LED_WAN, 0); - - ath79_register_gpio_keys_polled(-1, CF_EXXXN_KEYS_POLL_INTERVAL, - ARRAY_SIZE(cf_e320n_v2_gpio_keys), - cf_e320n_v2_gpio_keys); -} - -static void __init cf_e520n_setup(void) -{ - cf_exxxn_common_setup(0x10000, -1); - - cf_exxxn_qca953x_eth_setup(); - - cf_e5x0n_gpio_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e520n_leds_gpio), - cf_e520n_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_CF_E520N, "CF-E520N", "COMFAST CF-E520N", - cf_e520n_setup); - -static void __init cf_e530n_setup(void) -{ - cf_exxxn_common_setup(0x10000, -1); - - cf_exxxn_qca953x_eth_setup(); - - cf_e5x0n_gpio_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e530n_leds_gpio), - cf_e530n_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_CF_E530N, "CF-E530N", "COMFAST CF-E530N", - cf_e530n_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c deleted file mode 100644 index 49d9cf9bb5..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c +++ /dev/null @@ -1,281 +0,0 @@ -/* - * TP-LINK CPE210/210 v2/220/510/520 board support - * - * Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net> - * Copyright (C) 2017 Robert Marko <robimarko@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - - -#define CPE510_GPIO_LED_LAN0 11 -#define CPE510_GPIO_LED_LAN1 12 -#define CPE510_GPIO_LED_L1 13 -#define CPE510_GPIO_LED_L2 14 -#define CPE510_GPIO_LED_L3 15 -#define CPE510_GPIO_LED_L4 16 - -/* All LEDs/button except for link4 are the same for CPE and WBS series */ -#define WBS510_GPIO_LED_L4 2 - -#define CPE510_GPIO_EXTERNAL_LNA0 18 -#define CPE510_GPIO_EXTERNAL_LNA1 19 - -#define CPE510_GPIO_BTN_RESET 4 - -#define CPE510_KEYS_POLL_INTERVAL 20 /* msecs */ -#define CPE510_KEYS_DEBOUNCE_INTERVAL (3 * CPE510_KEYS_POLL_INTERVAL) - -/* CPE210 v2 reset GPIO */ -#define CPE210_V2_GPIO_BTN_RESET 17 - -static struct gpio_led cpe510_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan0", - .gpio = CPE510_GPIO_LED_LAN0, - .active_low = 1, - }, { - .name = "tp-link:green:lan1", - .gpio = CPE510_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "tp-link:green:link1", - .gpio = CPE510_GPIO_LED_L1, - .active_low = 1, - }, { - .name = "tp-link:green:link2", - .gpio = CPE510_GPIO_LED_L2, - .active_low = 1, - }, { - .name = "tp-link:green:link3", - .gpio = CPE510_GPIO_LED_L3, - .active_low = 1, - }, { - .name = "tp-link:green:link4", - .gpio = CPE510_GPIO_LED_L4, - .active_low = 1, - }, -}; - -static struct gpio_led wbs510_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan0", - .gpio = CPE510_GPIO_LED_LAN0, - .active_low = 1, - }, { - .name = "tp-link:green:lan1", - .gpio = CPE510_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "tp-link:green:link1", - .gpio = CPE510_GPIO_LED_L1, - .active_low = 1, - }, { - .name = "tp-link:green:link2", - .gpio = CPE510_GPIO_LED_L2, - .active_low = 1, - }, { - .name = "tp-link:green:link3", - .gpio = CPE510_GPIO_LED_L3, - .active_low = 1, - }, { - .name = "tp-link:green:link4", - .gpio = WBS510_GPIO_LED_L4, - .active_low = 1, - }, -}; - -static struct gpio_led cpe210_v2_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan0", - .gpio = CPE510_GPIO_LED_LAN0, - .active_low = 1, - }, { - .name = "tp-link:green:link1", - .gpio = CPE510_GPIO_LED_L1, - .active_low = 1, - }, { - .name = "tp-link:green:link2", - .gpio = CPE510_GPIO_LED_L2, - .active_low = 1, - }, { - .name = "tp-link:green:link3", - .gpio = CPE510_GPIO_LED_L3, - .active_low = 1, - }, { - .name = "tp-link:green:link4", - .gpio = CPE510_GPIO_LED_L4, - .active_low = 1, - }, -}; - -static struct gpio_keys_button cpe510_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = CPE510_KEYS_DEBOUNCE_INTERVAL, - .gpio = CPE510_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct gpio_keys_button cpe210_v2_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = CPE510_KEYS_DEBOUNCE_INTERVAL, - .gpio = CPE210_V2_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init cpe_setup(u8 *mac) -{ - /* Disable JTAG, enabling GPIOs 0-3 */ - /* Configure OBS4 line, for GPIO 4*/ - ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE, - AR934X_GPIO_FUNC_CLK_OBS4_EN); - - ath79_register_gpio_keys_polled(1, CPE510_KEYS_POLL_INTERVAL, - ARRAY_SIZE(cpe510_gpio_keys), - cpe510_gpio_keys); - - ath79_wmac_set_ext_lna_gpio(0, CPE510_GPIO_EXTERNAL_LNA0); - ath79_wmac_set_ext_lna_gpio(1, CPE510_GPIO_EXTERNAL_LNA1); - - ath79_register_m25p80(NULL); - - ath79_register_mdio(1, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_register_eth(1); -} - - -static void __init cpe210_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f830008); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe510_leds_gpio), - cpe510_leds_gpio); - - cpe_setup(mac); - - ath79_register_wmac(ee, mac); -} - -static void __init cpe510_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f830008); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe510_leds_gpio), - cpe510_leds_gpio); - - cpe_setup(mac); - - ath79_register_wmac(ee, mac); -} - -static void __init wbs_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f830008); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wbs510_leds_gpio), - wbs510_leds_gpio); - - cpe_setup(mac); - - ath79_register_wmac(ee, mac); -} - -static void __init cpe210_v2_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f830008); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe210_v2_leds_gpio), - cpe210_v2_leds_gpio); - ath79_register_gpio_keys_polled(-1, CPE510_KEYS_POLL_INTERVAL, - ARRAY_SIZE(cpe210_v2_gpio_keys), - cpe210_v2_gpio_keys); - ath79_register_m25p80(NULL); - ath79_register_mdio(0, 0x0); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.phy_mask = BIT(4); - ath79_register_eth(0); - ath79_register_wmac(ee, mac); -} - -static void __init cpe510_v2_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f830008); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe210_v2_leds_gpio), - cpe210_v2_leds_gpio); - ath79_register_gpio_keys_polled(-1, CPE510_KEYS_POLL_INTERVAL, - ARRAY_SIZE(cpe510_gpio_keys), - cpe510_gpio_keys); - - ath79_register_m25p80(NULL); - ath79_register_mdio(1, 0x0); - - /* LAN port */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(4); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_register_eth(0); - - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_CPE210, "CPE210", "TP-LINK CPE210/220", - cpe210_setup); - -MIPS_MACHINE(ATH79_MACH_CPE210_V2, "CPE210V2", "TP-LINK CPE210 v2", - cpe210_v2_setup); - -MIPS_MACHINE(ATH79_MACH_CPE210_V3, "CPE210V3", "TP-LINK CPE210 v3", - cpe210_v2_setup); - -MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE510/520", - cpe510_setup); - -MIPS_MACHINE(ATH79_MACH_CPE510_V2, "CPE510V2", "TP-LINK CPE510 v2", - cpe510_v2_setup); - -MIPS_MACHINE(ATH79_MACH_WBS210, "WBS210", "TP-LINK WBS210", - wbs_setup); - -MIPS_MACHINE(ATH79_MACH_WBS510, "WBS510", "TP-LINK WBS510", - wbs_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe870.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe870.c deleted file mode 100644 index 284cdc71c2..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe870.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * YunCore CPE870 board support - * - * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define CPE870_GPIO_LED_LINK1 0 -#define CPE870_GPIO_LED_LINK2 1 -#define CPE870_GPIO_LED_LINK3 2 -#define CPE870_GPIO_LED_LINK4 3 -#define CPE870_GPIO_LED_WLAN 13 -#define CPE870_GPIO_LED_WAN 19 -#define CPE870_GPIO_LED_LAN 20 - -#define CPE870_GPIO_BTN_RESET 16 - -#define CPE870_KEYS_POLL_INTERVAL 20 -#define CPE870_KEYS_DEBOUNCE_INTERVAL (3 * CPE870_KEYS_POLL_INTERVAL) - -static struct gpio_led cpe870_leds_gpio[] __initdata = { - { - .name = "cpe870:green:lan", - .gpio = CPE870_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "cpe870:green:wan", - .gpio = CPE870_GPIO_LED_WAN, - .active_low = 1, - }, - { - .name = "cpe870:green:wlan", - .gpio = CPE870_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "cpe870:green:link1", - .gpio = CPE870_GPIO_LED_LINK1, - .active_low = 1, - }, - { - .name = "cpe870:green:link2", - .gpio = CPE870_GPIO_LED_LINK2, - .active_low = 1, - }, - { - .name = "cpe870:green:link3", - .gpio = CPE870_GPIO_LED_LINK3, - .active_low = 1, - }, - { - .name = "cpe870:green:link4", - .gpio = CPE870_GPIO_LED_LINK4, - .active_low = 1, - }, -}; - -static struct gpio_keys_button cpe870_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = CPE870_KEYS_DEBOUNCE_INTERVAL, - .gpio = CPE870_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static void __init cpe870_gpio_setup(void) -{ - /* Disable JTAG (enables GPIO0-3) */ - ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); - - ath79_gpio_direction_select(CPE870_GPIO_LED_LINK1, true); - ath79_gpio_direction_select(CPE870_GPIO_LED_LINK2, true); - ath79_gpio_direction_select(CPE870_GPIO_LED_LINK3, true); - ath79_gpio_direction_select(CPE870_GPIO_LED_LINK4, true); - - /* Mute LEDs on boot */ - gpio_set_value(CPE870_GPIO_LED_LAN, 1); - gpio_set_value(CPE870_GPIO_LED_WAN, 1); - gpio_set_value(CPE870_GPIO_LED_LINK1, 1); - gpio_set_value(CPE870_GPIO_LED_LINK2, 1); - gpio_set_value(CPE870_GPIO_LED_LINK3, 1); - gpio_set_value(CPE870_GPIO_LED_LINK4, 1); - - ath79_gpio_output_select(CPE870_GPIO_LED_LINK1, 0); - ath79_gpio_output_select(CPE870_GPIO_LED_LINK2, 0); - ath79_gpio_output_select(CPE870_GPIO_LED_LINK3, 0); - ath79_gpio_output_select(CPE870_GPIO_LED_LINK4, 0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe870_leds_gpio), - cpe870_leds_gpio); - - ath79_register_gpio_keys_polled(-1, CPE870_KEYS_POLL_INTERVAL, - ARRAY_SIZE(cpe870_gpio_keys), - cpe870_gpio_keys); -} - -static void __init cpe870_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff1000); - u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - cpe870_gpio_setup(); - - ath79_register_mdio(1, 0x0); - - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(4); - - /* LAN */ - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - ath79_register_eth(1); - - /* WAN */ - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_register_eth(0); - - ath79_register_wmac(art, NULL); -} - -MIPS_MACHINE(ATH79_MACH_CPE870, "CPE870", "YunCore CPE870", cpe870_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cr3000.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cr3000.c deleted file mode 100644 index 235b0ec769..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cr3000.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * PowerCloud Systems CR3000 support - * - * Copyright (c) 2011 Qualcomm Atheros - * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2012-2013 PowerCloud Systems - * Copyright (c) 2015 Daniel Dickinson <openwrt@daniel.thecshore.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/gpio.h> -#include <linux/phy.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define CR3000_GPIO_LED_WLAN_2G 13 -#define CR3000_GPIO_LED_POWER_AMBER 15 -#define CR3000_GPIO_LED_WAN 18 -#define CR3000_GPIO_LED_LAN1 19 -#define CR3000_GPIO_LED_LAN2 20 -#define CR3000_GPIO_LED_LAN3 21 -#define CR3000_GPIO_LED_LAN4 22 - -#define CR3000_GPIO_BTN_WPS 16 -#define CR3000_GPIO_BTN_RESET 17 - -#define CR3000_KEYS_POLL_INTERVAL 20 /* msecs */ -#define CR3000_KEYS_DEBOUNCE_INTERVAL (3 * CR3000_KEYS_POLL_INTERVAL) - -#define CR3000_MAC0_OFFSET 0 -#define CR3000_MAC1_OFFSET 6 -#define CR3000_WMAC_CALDATA_OFFSET 0x1000 -#define CR3000_WMAC_MAC_OFFSET 0x1002 - -static struct gpio_led cr3000_leds_gpio[] __initdata = { - { - .name = "pcs:amber:power", - .gpio = CR3000_GPIO_LED_POWER_AMBER, - .active_low = 1, - }, - { - .name = "pcs:blue:wlan", - .gpio = CR3000_GPIO_LED_WLAN_2G, - .active_low = 1, - }, - { - .name = "pcs:blue:wan", - .gpio = CR3000_GPIO_LED_WAN, - .active_low = 1, - }, - { - .name = "pcs:blue:lan1", - .gpio = CR3000_GPIO_LED_LAN1, - .active_low = 1, - }, - { - .name = "pcs:blue:lan2", - .gpio = CR3000_GPIO_LED_LAN2, - .active_low = 1, - }, - { - .name = "pcs:blue:lan3", - .gpio = CR3000_GPIO_LED_LAN3, - .active_low = 1, - }, - { - .name = "pcs:blue:lan4", - .gpio = CR3000_GPIO_LED_LAN4, - .active_low = 1, - }, -}; - -static struct gpio_keys_button cr3000_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = CR3000_KEYS_DEBOUNCE_INTERVAL, - .gpio = CR3000_GPIO_BTN_WPS, - .active_low = 1, - }, - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = CR3000_KEYS_DEBOUNCE_INTERVAL, - .gpio = CR3000_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static void __init cr3000_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cr3000_leds_gpio), - cr3000_leds_gpio); - - ath79_register_gpio_keys_polled(-1, CR3000_KEYS_POLL_INTERVAL, - ARRAY_SIZE(cr3000_gpio_keys), - cr3000_gpio_keys); - - /* WLAN 2GHz onboard */ - ath79_register_wmac(art + CR3000_WMAC_CALDATA_OFFSET, art + CR3000_WMAC_MAC_OFFSET); - - /* FE Lan on first 4-ports of internal switch and attached to GMAC1 - * WAN Fast Ethernet interface attached to GMAC0 - * Could be configured as a 5-port switch, but we use - * the SoC capabilities to attach port 5 to a separate PHY/MAC - * theoretically this leaves future possibility of using SoC - * acceleration/offloading. - */ - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP); - - /* GMAC0 attached to PHY4 (port 5 of the internal switch) */ - ath79_switch_data.phy4_mii_en = 1; - /* For switch carrier ignore port 5 (wan) */ - ath79_switch_data.phy_poll_mask = 0x1; - - /* Register MII bus */ - ath79_register_mdio(1, 0x0); - - /* GMAC0 attached to PHY4 (port 5 of the internal switch) */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = 0x1; - - /* LAN */ - ath79_init_mac(ath79_eth1_data.mac_addr, art + CR3000_MAC0_OFFSET, 0); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_register_eth(1); - - /* Wan */ - ath79_init_mac(ath79_eth0_data.mac_addr, art + CR3000_MAC0_OFFSET, 1); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_CR3000, "CR3000", "PowerCloud Systems CR3000", - cr3000_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c deleted file mode 100644 index 7c41e7fbc0..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * PowerCloud Systems CR5000 support - * - * Copyright (c) 2011 Qualcomm Atheros - * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2012-2013 PowerCloud Systems - * Copyright (c) 2015 Daniel Dickinson <openwrt@daniel.thecshore.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/gpio.h> -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define CR5000_GPIO_LED_WLAN_2G 14 -#define CR5000_GPIO_LED_WPS 12 -#define CR5000_GPIO_LED_POWER_AMBER 4 -/* GPIO2 has to have JTAG disabled as it is also to - * power led - */ -#define CR5000_GPIO_LED_POWER_ENABLE 2 -#define CR5000_GPIO_BTN_WPS 16 -#define CR5000_GPIO_BTN_RESET 17 - -#define CR5000_KEYS_POLL_INTERVAL 20 /* msecs */ -#define CR5000_KEYS_DEBOUNCE_INTERVAL (3 * CR5000_KEYS_POLL_INTERVAL) - -#define CR5000_MAC0_OFFSET 0 -#define CR5000_WMAC_CALDATA_OFFSET 0x1000 -#define CR5000_WMAC_MAC_OFFSET 0x1002 -#define CR5000_PCIE_CALDATA_OFFSET 0x5000 -#define CR5000_PCIE_WMAC_OFFSET 0x5002 - -static struct gpio_led cr5000_leds_gpio[] __initdata = { - { - .name = "pcs:amber:power", - .gpio = CR5000_GPIO_LED_POWER_AMBER, - .active_low = 1, - }, - { - .name = "pcs:white:wps", - .gpio = CR5000_GPIO_LED_WPS, - .active_low = 1, - }, - { - .name = "pcs:blue:wlan", - .gpio = CR5000_GPIO_LED_WLAN_2G, - .active_low = 1, - }, -}; - -static struct gpio_keys_button cr5000_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = CR5000_KEYS_DEBOUNCE_INTERVAL, - .gpio = CR5000_GPIO_BTN_WPS, - .active_low = 1, - }, - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = CR5000_KEYS_DEBOUNCE_INTERVAL, - .gpio = CR5000_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg cr5000_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_led_cfg cr5000_ar8327_led_cfg = { - .led_ctrl0 = 0xcc35cc35, - .led_ctrl1 = 0xca35ca35, - .led_ctrl2 = 0xc935c935, - .led_ctrl3 = 0x03ffff00, - .open_drain = true, -}; - -static struct ar8327_platform_data cr5000_ar8327_data = { - .pad0_cfg = &cr5000_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &cr5000_ar8327_led_cfg, -}; - -static struct mdio_board_info cr5000_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &cr5000_ar8327_data, - }, -}; - -static void __init cr5000_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - struct ath9k_platform_data *pdata; - - ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); - gpio_request_one(CR5000_GPIO_LED_POWER_ENABLE, - GPIOF_OUT_INIT_LOW, "Power LED enable"); - ath79_gpio_output_select(CR5000_GPIO_LED_POWER_AMBER, AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(CR5000_GPIO_LED_WLAN_2G, AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(CR5000_GPIO_LED_WPS, AR934X_GPIO_OUT_GPIO); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cr5000_leds_gpio), - cr5000_leds_gpio); - ath79_register_gpio_keys_polled(-1, CR5000_KEYS_POLL_INTERVAL, - ARRAY_SIZE(cr5000_gpio_keys), - cr5000_gpio_keys); - ath79_register_usb(); - ath79_register_wmac(art + CR5000_WMAC_CALDATA_OFFSET, art + CR5000_WMAC_MAC_OFFSET); - ap91_pci_init(NULL, art + CR5000_PCIE_WMAC_OFFSET); - pdata = ap9x_pci_get_wmac_data(0); - if (pdata) - pdata->use_eeprom = true; - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + CR5000_MAC0_OFFSET, 0); - - mdiobus_register_board_info(cr5000_mdio0_info, - ARRAY_SIZE(cr5000_mdio0_info)); - - /* GMAC0 is connected to an AR8327 switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_CR5000, "CR5000", "PowerCloud Systems CR5000", - cr5000_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dap-1330-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dap-1330-a1.c deleted file mode 100644 index 9c50bc7e9b..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dap-1330-a1.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * D-Link DAP-1330 - * - * Copyright (c) 2013-2015 The Linux Foundation. All rights reserved. - * Copyright (c) 2017 Nicolò Veronese <nicveronese@gmail.com> - * Copyright (c) 2017 Federico Cappon <dududede371@gmail.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "nvram.h" - -#include <linux/kernel.h> -#include <linux/vmalloc.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/string.h> - -#define DAP_1330_GPIO_LED_GREEN_POWER 13 -#define DAP_1330_GPIO_LED_RED_POWER 3 -#define DAP_1330_GPIO_LED_GREEN_WIFI 14 -#define DAP_1330_GPIO_LED_RED_WIFI 11 -#define DAP_1330_GPIO_LED_SIGNAL1 15 -#define DAP_1330_GPIO_LED_SIGNAL2 16 - -#define DAP_1330_GPIO_BTN_WPS 2 -#define DAP_1330_GPIO_BTN_RESET 17 - -#define DAP_1330_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DAP_1330_KEYS_DEBOUNCE_INTERVAL (3 * DAP_1330_KEYS_POLL_INTERVAL) - -#define DAP1330_MAC_ADDR 0x1f020001 - -#define DAP1330_WMAC_CALDATA_ADDR 0x1f010000 -#define DAP_1330_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led dap_1330_leds_gpio[] __initdata = { - { - .name = "d-link:green:power", - .gpio = DAP_1330_GPIO_LED_GREEN_POWER, - .active_low = 1, - }, - { - .name = "d-link:red:power", - .gpio = DAP_1330_GPIO_LED_RED_POWER, - .active_low = 1, - }, - { - .name = "d-link:green:wifi", - .gpio = DAP_1330_GPIO_LED_GREEN_WIFI, - .active_low = 1, - }, - { - .name = "d-link:red:wifi", - .gpio = DAP_1330_GPIO_LED_RED_WIFI, - .active_low = 1, - }, - { - .name = "d-link:green:signal1", - .gpio = DAP_1330_GPIO_LED_SIGNAL1, - .active_low = 1, - }, - { - .name = "d-link:green:signal2", - .gpio = DAP_1330_GPIO_LED_SIGNAL2, - .active_low = 1, - } -}; - -static struct gpio_keys_button dap_1330_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DAP_1330_KEYS_DEBOUNCE_INTERVAL, - .gpio = DAP_1330_GPIO_BTN_WPS, - .active_low = 1, - }, - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DAP_1330_KEYS_DEBOUNCE_INTERVAL, - .gpio = DAP_1330_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init dap_1330_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(DAP1330_WMAC_CALDATA_ADDR); - u8 *mac_ptr = (u8 *) KSEG1ADDR(DAP1330_MAC_ADDR); - u8 mac[ETH_ALEN]; - - ath79_parse_ascii_mac((char *) mac_ptr, mac); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dap_1330_leds_gpio), - dap_1330_leds_gpio); - - ath79_register_gpio_keys_polled(-1, DAP_1330_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dap_1330_gpio_keys), - dap_1330_gpio_keys); - - ath79_register_wmac(art + DAP_1330_WMAC_CALDATA_OFFSET, mac); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - - /* LAN ports */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_switch_data.phy_poll_mask |= BIT(4); - ath79_switch_data.phy4_mii_en = 1; - ath79_register_eth(1); -} - -MIPS_MACHINE(ATH79_MACH_DAP_1330_A1, "DAP-1330-A1", - "D-Link DAP-1330 Rev. A1", dap_1330_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c deleted file mode 100644 index 2577dbffae..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * D-Link DAP-2695 rev. A1 support - * - * Copyright (c) 2012 Qualcomm Atheros - * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2016 Stijn Tintel <stijn@linux-ipv6.be> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "nvram.h" - -#define DAP2695_GPIO_LED_GREEN_POWER 23 -#define DAP2695_GPIO_LED_RED_POWER 14 -#define DAP2695_GPIO_LED_WLAN_2G 13 - -#define DAP2695_GPIO_BTN_RESET 17 - -#define DAP2695_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DAP2695_KEYS_DEBOUNCE_INTERVAL (3 * DAP2695_KEYS_POLL_INTERVAL) - -#define DAP2695_NVRAM_ADDR 0x1f040000 -#define DAP2695_NVRAM_SIZE 0x10000 - -#define DAP2695_MAC0_OFFSET 1 -#define DAP2695_MAC1_OFFSET 2 -#define DAP2695_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led dap2695_leds_gpio[] __initdata = { - { - .name = "d-link:green:power", - .gpio = DAP2695_GPIO_LED_GREEN_POWER, - .active_low = 1, - }, - { - .name = "d-link:red:power", - .gpio = DAP2695_GPIO_LED_RED_POWER, - .active_low = 1, - }, - { - .name = "d-link:green:wlan2g", - .gpio = DAP2695_GPIO_LED_WLAN_2G, - .active_low = 1, - }, -}; - -static struct gpio_keys_button dap2695_gpio_keys[] __initdata = { - { - .desc = "Soft reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DAP2695_KEYS_DEBOUNCE_INTERVAL, - .gpio = DAP2695_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg dap2695_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, - .mac06_exchange_dis = true, -}; - -static struct ar8327_pad_cfg dap2695_ar8327_pad6_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -static struct ar8327_platform_data dap2695_ar8327_data = { - .pad0_cfg = &dap2695_ar8327_pad0_cfg, - .pad6_cfg = &dap2695_ar8327_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .port6_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info dap2695_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &dap2695_ar8327_data, - }, -}; - -static struct flash_platform_data dap2695_flash_data = { - .type = "mx25l12805d", -}; - -static void dap2695_get_mac(const char *name, char *mac) -{ - u8 *nvram = (u8 *) KSEG1ADDR(DAP2695_NVRAM_ADDR); - int err; - - err = ath79_nvram_parse_mac_addr(nvram, DAP2695_NVRAM_SIZE, - name, mac); - if (err) - pr_err("no MAC address found for %s\n", name); -} - -static void __init dap2695_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 mac0[ETH_ALEN], mac1[ETH_ALEN], wmac0[ETH_ALEN]; - - dap2695_get_mac("lanmac=", mac0); - dap2695_get_mac("wanmac=", mac1); - dap2695_get_mac("wlanmac=", wmac0); - - ath79_register_m25p80(&dap2695_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dap2695_leds_gpio), - dap2695_leds_gpio); - ath79_register_gpio_keys_polled(-1, DAP2695_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dap2695_gpio_keys), - dap2695_gpio_keys); - - ath79_register_wmac(art + DAP2695_WMAC_CALDATA_OFFSET, wmac0); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(dap2695_mdio0_info, - ARRAY_SIZE(dap2695_mdio0_info)); - - /* GMAC0 is connected to the RGMII interface */ - ath79_init_mac(ath79_eth0_data.mac_addr, mac0, DAP2695_MAC0_OFFSET); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x56000000; - - ath79_register_eth(0); - - /* GMAC1 is connected to the SGMII interface */ - ath79_init_mac(ath79_eth1_data.mac_addr, mac1, DAP2695_MAC1_OFFSET); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_pll_data.pll_1000 = 0x03000101; - - ath79_register_eth(1); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_DAP_2695_A1, "DAP-2695-A1", - "D-Link DAP-2695 rev. A1", - dap2695_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dgl-5500-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dgl-5500-a1.c deleted file mode 100644 index f9f3f9e60d..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dgl-5500-a1.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * D-Link DGL-5500 board support - * - * Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define DGL_5500_A1_GPIO_LED_POWER_ORANGE 14 -#define DGL_5500_A1_GPIO_LED_POWER_GREEN 19 -#define DGL_5500_A1_GPIO_LED_PLANET_GREEN 22 -#define DGL_5500_A1_GPIO_LED_PLANET_ORANGE 23 - -#define DGL_5500_A1_GPIO_BTN_WPS 16 -#define DGL_5500_A1_GPIO_BTN_RESET 17 - -#define DGL_5500_A1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DGL_5500_A1_KEYS_DEBOUNCE_INTERVAL \ - (3 * DGL_5500_A1_KEYS_POLL_INTERVAL) - -#define DGL_5500_A1_WMAC_CALDATA_OFFSET 0x1000 - -#define DGL_5500_A1_LAN_MAC_OFFSET 0x04 -#define DGL_5500_A1_WAN_MAC_OFFSET 0x16 - -static struct gpio_led dgl_5500_a1_leds_gpio[] __initdata = { - { - .name = "d-link:green:power", - .gpio = DGL_5500_A1_GPIO_LED_POWER_GREEN, - .active_low = 1, - }, - { - .name = "d-link:orange:power", - .gpio = DGL_5500_A1_GPIO_LED_POWER_ORANGE, - .active_low = 1, - }, - { - .name = "d-link:green:planet", - .gpio = DGL_5500_A1_GPIO_LED_PLANET_GREEN, - .active_low = 1, - }, - { - .name = "d-link:orange:planet", - .gpio = DGL_5500_A1_GPIO_LED_PLANET_ORANGE, - .active_low = 1, - }, -}; - -static struct gpio_keys_button dgl_5500_a1_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DGL_5500_A1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DGL_5500_A1_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DGL_5500_A1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DGL_5500_A1_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg dgl_5500_a1_ar8327_pad0_cfg = { - /* Use the SGMII interface for the GMAC0 of the AR8327 switch */ - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -static struct ar8327_platform_data dgl_5500_a1_ar8327_data = { - .pad0_cfg = &dgl_5500_a1_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info dgl_5500_a1_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &dgl_5500_a1_ar8327_data, - }, -}; - -static void __init dgl_5500_a1_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000); - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 lan_mac[ETH_ALEN]; - - ath79_parse_ascii_mac(mac + DGL_5500_A1_LAN_MAC_OFFSET, lan_mac); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dgl_5500_a1_leds_gpio), - dgl_5500_a1_leds_gpio); - ath79_register_gpio_keys_polled(-1, DGL_5500_A1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dgl_5500_a1_gpio_keys), - dgl_5500_a1_gpio_keys); - - ath79_register_wmac(art + DGL_5500_A1_WMAC_CALDATA_OFFSET, lan_mac); - - ath79_register_mdio(0, 0x0); - mdiobus_register_board_info(dgl_5500_a1_mdio0_info, - ARRAY_SIZE(dgl_5500_a1_mdio0_info)); - - ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0); - - /* GMAC1 is connected to an AR8327N switch via the SMGII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.phy_mask = BIT(0); - ath79_eth1_data.mii_bus_dev = &ath79_mdio0_device.dev; - - ath79_eth1_pll_data.pll_1000 = 0x03000101; - - ath79_register_eth(1); - - ath79_register_usb(); - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_DGL_5500_A1, "DGL-5500-A1", "D-Link DGL-5500 rev. A1", - dgl_5500_a1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c deleted file mode 100644 index 275d2a29a0..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * D-Link DHP-1565 rev. A1 board support - * - * Copyright (C) 2014 Jacek Kikiewicz - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define DHP1565A1_GPIO_LED_BLUE_USB 11 -#define DHP1565A1_GPIO_LED_AMBER_POWER 14 -#define DHP1565A1_GPIO_LED_BLUE_POWER 22 -#define DHP1565A1_GPIO_LED_BLUE_WPS 15 -#define DHP1565A1_GPIO_LED_AMBER_PLANET 19 -#define DHP1565A1_GPIO_LED_BLUE_PLANET 18 -#define DHP1565A1_GPIO_LED_WLAN_2G 13 - -#define DHP1565A1_GPIO_WAN_LED_ENABLE 20 - -#define DHP1565A1_GPIO_BTN_RESET 17 -#define DHP1565A1_GPIO_BTN_WPS 16 - -#define DHP1565A1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DHP1565A1_KEYS_DEBOUNCE_INTERVAL (3 * DHP1565A1_KEYS_POLL_INTERVAL) - -#define DHP1565A1_MAC0_OFFSET 0xFFA0 -#define DHP1565A1_MAC1_OFFSET 0xFFB4 -#define DHP1565A1_WMAC0_OFFSET 0x5 -#define DHP1565A1_WMAC_CALDATA_OFFSET 0x1000 -#define DHP1565A1_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led dhp1565a1_leds_gpio[] __initdata = { - { - .name = "d-link:amber:power", - .gpio = DHP1565A1_GPIO_LED_AMBER_POWER, - .active_low = 1, - }, - { - .name = "d-link:green:power", - .gpio = DHP1565A1_GPIO_LED_BLUE_POWER, - .active_low = 1, - }, - { - .name = "d-link:amber:planet", - .gpio = DHP1565A1_GPIO_LED_AMBER_PLANET, - .active_low = 1, - }, - { - .name = "d-link:green:planet", - .gpio = DHP1565A1_GPIO_LED_BLUE_PLANET, - .active_low = 1, - }, -}; - -static struct gpio_keys_button dhp1565a1_gpio_keys[] __initdata = { - { - .desc = "Soft reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DHP1565A1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DHP1565A1_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DHP1565A1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DHP1565A1_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg dhp1565a1_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_platform_data dhp1565a1_ar8327_data = { - .pad0_cfg = &dhp1565a1_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info dhp1565a1_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &dhp1565a1_ar8327_data, - }, -}; - -static void __init dhp1565a1_generic_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000); - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 mac0[ETH_ALEN], mac1[ETH_ALEN]; - u8 wmac0[ETH_ALEN]; - - ath79_parse_ascii_mac(mac + DHP1565A1_MAC0_OFFSET, mac0); - ath79_parse_ascii_mac(mac + DHP1565A1_MAC1_OFFSET, mac1); - - ath79_register_m25p80(NULL); - - ath79_register_gpio_keys_polled(-1, DHP1565A1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dhp1565a1_gpio_keys), - dhp1565a1_gpio_keys); - - ath79_init_mac(wmac0, mac0, 0); - ath79_register_wmac(art + DHP1565A1_WMAC_CALDATA_OFFSET, wmac0); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); - - mdiobus_register_board_info(dhp1565a1_mdio0_info, - ARRAY_SIZE(dhp1565a1_mdio0_info)); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 1); - - /* GMAC0 is connected to an AR8327N switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_register_eth(0); - - ath79_register_usb(); -} - -static void __init dhp1565a1_setup(void) -{ - ath79_register_leds_gpio(-1, ARRAY_SIZE(dhp1565a1_leds_gpio), - dhp1565a1_leds_gpio); - - dhp1565a1_generic_setup(); -} - -MIPS_MACHINE(ATH79_MACH_DHP_1565_A1, "DHP-1565-A1", - "D-Link DHP-1565 rev. A1", - dhp1565a1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-505-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-505-a1.c deleted file mode 100644 index 1367b64a8f..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-505-a1.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * DLink DIR-505 A1 board support - * - * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define DIR_505A1_GPIO_BTN_WPS 11 /* verify */ -#define DIR_505A1_GPIO_BTN_RESET 12 /* verify */ - -#define DIR_505A1_GPIO_LED_RED 26 /* unused, fyi */ -#define DIR_505A1_GPIO_LED_GREEN 27 - -#define DIR_505A1_GPIO_WAN_LED_ENABLE 1 - -#define DIR_505A1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DIR_505A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_505A1_KEYS_POLL_INTERVAL) - -#define DIR_505A1_ART_ADDRESS 0x1f010000 -#define DIR_505A1_CALDATA_OFFSET 0x1000 - -#define DIR_505A1_MAC_PART_ADDRESS 0x1f020000 -#define DIR_505A1_LAN_MAC_OFFSET 0x04 -#define DIR_505A1_WAN_MAC_OFFSET 0x16 - -static struct gpio_led dir_505_a1_leds_gpio[] __initdata = { - { - .name = "d-link:green:power", - .gpio = DIR_505A1_GPIO_LED_GREEN, - .active_low = 1, - }, { - .name = "d-link:red:status", - .gpio = DIR_505A1_GPIO_LED_RED, - .active_low = 1, - }, -}; - -static struct gpio_keys_button dir_505_a1_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DIR_505A1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_505A1_GPIO_BTN_RESET, - .active_low = 0, - }, { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DIR_505A1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_505A1_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static void __init dir_505_a1_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(DIR_505A1_ART_ADDRESS); - u8 *mac = (u8 *) KSEG1ADDR(DIR_505A1_MAC_PART_ADDRESS); - u8 lan_mac[ETH_ALEN]; - u8 wan_mac[ETH_ALEN]; - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - gpio_request_one(DIR_505A1_GPIO_WAN_LED_ENABLE, - GPIOF_OUT_INIT_LOW, "WAN LED enable"); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_505_a1_leds_gpio), - dir_505_a1_leds_gpio); - - ath79_register_gpio_keys_polled(1, DIR_505A1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dir_505_a1_gpio_keys), - dir_505_a1_gpio_keys); - - ath79_register_m25p80(NULL); - - ath79_register_usb(); - - ath79_parse_ascii_mac(mac + DIR_505A1_LAN_MAC_OFFSET, lan_mac); - ath79_parse_ascii_mac(mac + DIR_505A1_WAN_MAC_OFFSET, wan_mac); - - ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(1); - ath79_register_eth(0); - - ath79_register_wmac(art + DIR_505A1_CALDATA_OFFSET, lan_mac); -} - -MIPS_MACHINE(ATH79_MACH_DIR_505_A1, "DIR-505-A1", - "D-Link DIR-505 rev. A1", dir_505_a1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-600-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-600-a1.c deleted file mode 100644 index 5e6134de7a..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-600-a1.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * D-Link DIR-600 rev. A1 board support - * - * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" -#include "nvram.h" - -#define DIR_600_A1_GPIO_LED_WPS 0 -#define DIR_600_A1_GPIO_LED_POWER_AMBER 1 -#define DIR_600_A1_GPIO_LED_POWER_GREEN 6 -#define DIR_600_A1_GPIO_LED_LAN1 13 -#define DIR_600_A1_GPIO_LED_LAN2 14 -#define DIR_600_A1_GPIO_LED_LAN3 15 -#define DIR_600_A1_GPIO_LED_LAN4 16 -#define DIR_600_A1_GPIO_LED_WAN_AMBER 7 -#define DIR_600_A1_GPIO_LED_WAN_GREEN 17 - -#define DIR_600_A1_GPIO_BTN_RESET 8 -#define DIR_600_A1_GPIO_BTN_WPS 12 - -#define DIR_600_A1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DIR_600_A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_600_A1_KEYS_POLL_INTERVAL) - -#define DIR_600_A1_NVRAM_ADDR 0x1f030000 -#define DIR_600_A1_NVRAM_SIZE 0x10000 - -static struct gpio_led dir_600_a1_leds_gpio[] __initdata = { - { - .name = "d-link:green:power", - .gpio = DIR_600_A1_GPIO_LED_POWER_GREEN, - }, { - .name = "d-link:amber:power", - .gpio = DIR_600_A1_GPIO_LED_POWER_AMBER, - }, { - .name = "d-link:amber:wan", - .gpio = DIR_600_A1_GPIO_LED_WAN_AMBER, - }, { - .name = "d-link:green:wan", - .gpio = DIR_600_A1_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, { - .name = "d-link:green:lan1", - .gpio = DIR_600_A1_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "d-link:green:lan2", - .gpio = DIR_600_A1_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "d-link:green:lan3", - .gpio = DIR_600_A1_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "d-link:green:lan4", - .gpio = DIR_600_A1_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "d-link:blue:wps", - .gpio = DIR_600_A1_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button dir_600_a1_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_600_A1_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_600_A1_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static void __init dir_600_a1_setup(void) -{ - const char *nvram = (char *) KSEG1ADDR(DIR_600_A1_NVRAM_ADDR); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - u8 mac_buff[6]; - u8 *mac = NULL; - - if (ath79_nvram_parse_mac_addr(nvram, DIR_600_A1_NVRAM_SIZE, - "lan_mac=", mac_buff) == 0) { - ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1); - mac = mac_buff; - } - - ath79_register_m25p80(NULL); - - ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio), - dir_600_a1_leds_gpio); - - ath79_register_gpio_keys_polled(-1, DIR_600_A1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dir_600_a1_gpio_keys), - dir_600_a1_gpio_keys); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - - ath79_register_mdio(0, 0x0); - - /* LAN ports */ - ath79_register_eth(1); - - /* WAN port */ - ath79_register_eth(0); - - ap91_pci_init(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1", - dir_600_a1_setup); - -MIPS_MACHINE(ATH79_MACH_EBR_2310_C1, "EBR-2310-C1", "D-Link EBR-2310 rev. C1", - dir_600_a1_setup); - -static void __init dir_615_e1_setup(void) -{ - dir_600_a1_setup(); -} - -MIPS_MACHINE(ATH79_MACH_DIR_615_E1, "DIR-615-E1", "D-Link DIR-615 rev. E1", - dir_615_e1_setup); - -static void __init dir_615_e4_setup(void) -{ - dir_600_a1_setup(); - ap9x_pci_setup_wmac_led_pin(0, 1); -} - -MIPS_MACHINE(ATH79_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4", - dir_615_e4_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c deleted file mode 100644 index e55a43f9c7..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * D-Link DIR-615 rev C1 board support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "nvram.h" - -#define DIR_615C1_GPIO_LED_ORANGE_STATUS 1 /* ORANGE:STATUS:TRICOLOR */ -#define DIR_615C1_GPIO_LED_BLUE_WPS 3 /* BLUE:WPS */ -#define DIR_615C1_GPIO_LED_GREEN_WAN 4 /* GREEN:WAN:TRICOLOR */ -#define DIR_615C1_GPIO_LED_GREEN_WANCPU 5 /* GREEN:WAN:CPU:TRICOLOR */ -#define DIR_615C1_GPIO_LED_GREEN_WLAN 6 /* GREEN:WLAN */ -#define DIR_615C1_GPIO_LED_GREEN_STATUS 14 /* GREEN:STATUS:TRICOLOR */ -#define DIR_615C1_GPIO_LED_ORANGE_WAN 15 /* ORANGE:WAN:TRICOLOR */ - -/* buttons may need refinement */ - -#define DIR_615C1_GPIO_BTN_WPS 12 -#define DIR_615C1_GPIO_BTN_RESET 21 - -#define DIR_615C1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DIR_615C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615C1_KEYS_POLL_INTERVAL) - -#define DIR_615C1_CONFIG_ADDR 0x1f020000 -#define DIR_615C1_CONFIG_SIZE 0x10000 - -#define DIR_615C1_WLAN_MAC_ADDR 0x1f3fffb4 - -static struct gpio_led dir_615c1_leds_gpio[] __initdata = { - { - .name = "d-link:orange:status", - .gpio = DIR_615C1_GPIO_LED_ORANGE_STATUS, - .active_low = 1, - }, { - .name = "d-link:blue:wps", - .gpio = DIR_615C1_GPIO_LED_BLUE_WPS, - .active_low = 1, - }, { - .name = "d-link:green:wan", - .gpio = DIR_615C1_GPIO_LED_GREEN_WAN, - .active_low = 1, - }, { - .name = "d-link:green:wancpu", - .gpio = DIR_615C1_GPIO_LED_GREEN_WANCPU, - .active_low = 1, - }, { - .name = "d-link:green:wlan", - .gpio = DIR_615C1_GPIO_LED_GREEN_WLAN, - .active_low = 1, - }, { - .name = "d-link:green:status", - .gpio = DIR_615C1_GPIO_LED_GREEN_STATUS, - .active_low = 1, - }, { - .name = "d-link:orange:wan", - .gpio = DIR_615C1_GPIO_LED_ORANGE_WAN, - .active_low = 1, - } - -}; - -static struct gpio_keys_button dir_615c1_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_615C1_GPIO_BTN_RESET, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_615C1_GPIO_BTN_WPS, - } -}; - -#define DIR_615C1_LAN_PHYMASK BIT(0) -#define DIR_615C1_WAN_PHYMASK BIT(4) -#define DIR_615C1_MDIO_MASK (~(DIR_615C1_LAN_PHYMASK | \ - DIR_615C1_WAN_PHYMASK)) - -static void __init dir_615c1_setup(void) -{ - const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - u8 mac[ETH_ALEN], wlan_mac[ETH_ALEN]; - - if (ath79_nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE, - "lan_mac=", mac) == 0) { - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - } - - ath79_parse_ascii_mac((char *) KSEG1ADDR(DIR_615C1_WLAN_MAC_ADDR), wlan_mac); - - ath79_register_mdio(0, DIR_615C1_MDIO_MASK); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.phy_mask = DIR_615C1_LAN_PHYMASK; - - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = DIR_615C1_WAN_PHYMASK; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio), - dir_615c1_leds_gpio); - - ath79_register_gpio_keys_polled(-1, DIR_615C1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dir_615c1_gpio_keys), - dir_615c1_gpio_keys); - - ath79_register_wmac(eeprom, wlan_mac); -} - -MIPS_MACHINE(ATH79_MACH_DIR_615_C1, "DIR-615-C1", "D-Link DIR-615 rev. C1", - dir_615c1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c deleted file mode 100644 index 64fe438dcb..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * D-Link DIR-615 rev. I1 board support - * Copyright (C) 2013-2015 Jaehoon You <teslamint@gmail.com> - * - * based on the DIR-600 rev. A1 board support code - * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com> - * - * based on the TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 board support code - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define DIR_615_I1_GPIO_LED_WPS 15 -#define DIR_615_I1_GPIO_LED_POWER_AMBER 14 -#define DIR_615_I1_GPIO_LED_POWER_GREEN 4 -#define DIR_615_I1_GPIO_LED_WAN_AMBER 22 -#define DIR_615_I1_GPIO_LED_WAN_GREEN 12 -#define DIR_615_I1_GPIO_LED_WLAN_GREEN 13 - -#define DIR_615_I1_GPIO_BTN_WPS 16 -#define DIR_615_I1_GPIO_BTN_RESET 17 - -#define DIR_615_I1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DIR_615_I1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_I1_KEYS_POLL_INTERVAL) - -#define DIR_615_I1_LAN_PHYMASK BIT(0) -#define DIR_615_I1_WAN_PHYMASK BIT(4) -#define DIR_615_I1_WLAN_MAC_ADDR 0x1fffffb4 - -static struct gpio_led dir_615_i1_leds_gpio[] __initdata = { - { - .name = "d-link:green:power", - .gpio = DIR_615_I1_GPIO_LED_POWER_GREEN, - }, { - .name = "d-link:amber:power", - .gpio = DIR_615_I1_GPIO_LED_POWER_AMBER, - }, { - .name = "d-link:amber:wan", - .gpio = DIR_615_I1_GPIO_LED_WAN_AMBER, - }, { - .name = "d-link:green:wan", - .gpio = DIR_615_I1_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, { - .name = "d-link:green:wlan", - .gpio = DIR_615_I1_GPIO_LED_WLAN_GREEN, - .active_low = 1, - }, { - .name = "d-link:blue:wps", - .gpio = DIR_615_I1_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button dir_615_i1_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DIR_615_I1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_615_I1_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DIR_615_I1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_615_I1_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static void __init dir_615_i1_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - u8 mac[ETH_ALEN]; - - ath79_register_mdio(0, 0x0); - ath79_register_mdio(1, ~(DIR_615_I1_WAN_PHYMASK)); - - ath79_parse_ascii_mac((char *) KSEG1ADDR(DIR_615_I1_WLAN_MAC_ADDR), mac); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - - /* GMAC0 is connected to the PHY0 of the internal switch */ - ath79_switch_data.phy4_mii_en = 1; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = DIR_615_I1_WAN_PHYMASK; - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - - /* GMAC1 is connected to the internal switch */ - ath79_eth1_data.phy_mask = DIR_615_I1_LAN_PHYMASK; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(NULL); - - /* Disable JTAG, enabling GPIOs 0-3 */ - /* Configure OBS4 line, for GPIO 4*/ - ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE, - AR934X_GPIO_FUNC_CLK_OBS4_EN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615_i1_leds_gpio), - dir_615_i1_leds_gpio); - - ath79_register_gpio_keys_polled(-1, DIR_615_I1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dir_615_i1_gpio_keys), - dir_615_i1_gpio_keys); - - ath79_register_wmac(eeprom, mac); -} - -MIPS_MACHINE(ATH79_MACH_DIR_615_I1, "DIR-615-I1", "D-Link DIR-615 rev. I1", - dir_615_i1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-b1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-b1.c deleted file mode 100644 index 9b82990b13..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-b1.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * D-Link DIR-825 rev. B1 board support - * - * Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o. - * - * based on mach-wndr3700.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/rtl8366.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define DIR825B1_GPIO_LED_BLUE_USB 0 -#define DIR825B1_GPIO_LED_ORANGE_POWER 1 -#define DIR825B1_GPIO_LED_BLUE_POWER 2 -#define DIR825B1_GPIO_LED_BLUE_WPS 4 -#define DIR825B1_GPIO_LED_ORANGE_PLANET 6 -#define DIR825B1_GPIO_LED_BLUE_PLANET 11 - -#define DIR825B1_GPIO_BTN_RESET 3 -#define DIR825B1_GPIO_BTN_WPS 8 - -#define DIR825B1_GPIO_RTL8366_SDA 5 -#define DIR825B1_GPIO_RTL8366_SCK 7 - -#define DIR825B1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DIR825B1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825B1_KEYS_POLL_INTERVAL) - -#define DIR825B1_CAL0_OFFSET 0x1000 -#define DIR825B1_CAL1_OFFSET 0x5000 -#define DIR825B1_MAC0_OFFSET 0xffa0 -#define DIR825B1_MAC1_OFFSET 0xffb4 - -#define DIR825B1_CAL_LOCATION_0 0x1f660000 -#define DIR825B1_CAL_LOCATION_1 0x1f7f0000 - -static struct gpio_led dir825b1_leds_gpio[] __initdata = { - { - .name = "d-link:blue:usb", - .gpio = DIR825B1_GPIO_LED_BLUE_USB, - .active_low = 1, - }, { - .name = "d-link:orange:power", - .gpio = DIR825B1_GPIO_LED_ORANGE_POWER, - .active_low = 1, - }, { - .name = "d-link:blue:power", - .gpio = DIR825B1_GPIO_LED_BLUE_POWER, - .active_low = 1, - }, { - .name = "d-link:blue:wps", - .gpio = DIR825B1_GPIO_LED_BLUE_WPS, - .active_low = 1, - }, { - .name = "d-link:orange:planet", - .gpio = DIR825B1_GPIO_LED_ORANGE_PLANET, - .active_low = 1, - }, { - .name = "d-link:blue:planet", - .gpio = DIR825B1_GPIO_LED_BLUE_PLANET, - .active_low = 1, - } -}; - -static struct gpio_keys_button dir825b1_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR825B1_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR825B1_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = { - { .reg = 0x06, .val = 0x0108 }, -}; - -static struct rtl8366_platform_data dir825b1_rtl8366s_data = { - .gpio_sda = DIR825B1_GPIO_RTL8366_SDA, - .gpio_sck = DIR825B1_GPIO_RTL8366_SCK, - .num_initvals = ARRAY_SIZE(dir825b1_rtl8366s_initvals), - .initvals = dir825b1_rtl8366s_initvals, -}; - -static struct platform_device dir825b1_rtl8366s_device = { - .name = RTL8366S_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &dir825b1_rtl8366s_data, - } -}; - -static bool __init dir825b1_is_caldata_valid(u8 *p) -{ - u16 *magic0, *magic1; - - magic0 = (u16 *)(p + DIR825B1_CAL0_OFFSET); - magic1 = (u16 *)(p + DIR825B1_CAL1_OFFSET); - - return (*magic0 == 0xa55a && *magic1 == 0xa55a); -} - -static void __init dir825b1_wlan_init(void) -{ - u8 *caldata; - u8 mac0[ETH_ALEN], mac1[ETH_ALEN]; - u8 wmac0[ETH_ALEN], wmac1[ETH_ALEN]; - - caldata = (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0); - if (!dir825b1_is_caldata_valid(caldata)) { - caldata = (u8 *)KSEG1ADDR(DIR825B1_CAL_LOCATION_1); - if (!dir825b1_is_caldata_valid(caldata)) { - pr_err("no calibration data found\n"); - return; - } - } - - ath79_parse_ascii_mac(caldata + DIR825B1_MAC0_OFFSET, mac0); - ath79_parse_ascii_mac(caldata + DIR825B1_MAC1_OFFSET, mac1); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 0); - ath79_init_mac(wmac0, mac0, 0); - ath79_init_mac(wmac1, mac1, 1); - - ap9x_pci_setup_wmac_led_pin(0, 5); - ap9x_pci_setup_wmac_led_pin(1, 5); - - ap94_pci_init(caldata + DIR825B1_CAL0_OFFSET, wmac0, - caldata + DIR825B1_CAL1_OFFSET, wmac1); -} - -static void __init dir825b1_setup(void) -{ - dir825b1_wlan_init(); - - ath79_register_mdio(0, 0x0); - - ath79_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_pll_data.pll_1000 = 0x11110000; - - ath79_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = 0x10; - ath79_eth1_pll_data.pll_1000 = 0x11110000; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio), - dir825b1_leds_gpio); - - ath79_register_gpio_keys_polled(-1, DIR825B1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dir825b1_gpio_keys), - dir825b1_gpio_keys); - - ath79_register_usb(); - - platform_device_register(&dir825b1_rtl8366s_device); -} - -MIPS_MACHINE(ATH79_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1", - dir825b1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c deleted file mode 100644 index 0d586c27e4..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c +++ /dev/null @@ -1,241 +0,0 @@ -/* - * D-Link DIR-825 rev. C1 board support - * - * Copyright (C) 2013 Alexander Stadler - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define DIR825C1_GPIO_LED_BLUE_USB 11 -#define DIR825C1_GPIO_LED_AMBER_POWER 14 -#define DIR825C1_GPIO_LED_BLUE_POWER 22 -#define DIR825C1_GPIO_LED_BLUE_WPS 15 -#define DIR825C1_GPIO_LED_AMBER_PLANET 19 -#define DIR825C1_GPIO_LED_BLUE_PLANET 18 -#define DIR825C1_GPIO_LED_WLAN_2G 13 - -#define DIR825C1_GPIO_WAN_LED_ENABLE 20 - -#define DIR825C1_GPIO_BTN_RESET 17 -#define DIR825C1_GPIO_BTN_WPS 16 - -#define DIR825C1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DIR825C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825C1_KEYS_POLL_INTERVAL) - -#define DIR825C1_MAC0_OFFSET 0x4 -#define DIR825C1_MAC1_OFFSET 0x18 -#define DIR825C1_WMAC_CALDATA_OFFSET 0x1000 -#define DIR825C1_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led dir825c1_leds_gpio[] __initdata = { - { - .name = "d-link:blue:usb", - .gpio = DIR825C1_GPIO_LED_BLUE_USB, - .active_low = 1, - }, - { - .name = "d-link:amber:power", - .gpio = DIR825C1_GPIO_LED_AMBER_POWER, - .active_low = 1, - }, - { - .name = "d-link:blue:power", - .gpio = DIR825C1_GPIO_LED_BLUE_POWER, - .active_low = 1, - }, - { - .name = "d-link:blue:wps", - .gpio = DIR825C1_GPIO_LED_BLUE_WPS, - .active_low = 1, - }, - { - .name = "d-link:amber:planet", - .gpio = DIR825C1_GPIO_LED_AMBER_PLANET, - .active_low = 1, - }, - { - .name = "d-link:blue:wlan2g", - .gpio = DIR825C1_GPIO_LED_WLAN_2G, - .active_low = 1, - }, -}; - -static struct gpio_led dir835a1_leds_gpio[] __initdata = { - { - .name = "d-link:amber:power", - .gpio = DIR825C1_GPIO_LED_AMBER_POWER, - .active_low = 1, - }, - { - .name = "d-link:green:power", - .gpio = DIR825C1_GPIO_LED_BLUE_POWER, - .active_low = 1, - }, - { - .name = "d-link:blue:wps", - .gpio = DIR825C1_GPIO_LED_BLUE_WPS, - .active_low = 1, - }, - { - .name = "d-link:amber:planet", - .gpio = DIR825C1_GPIO_LED_AMBER_PLANET, - .active_low = 1, - }, - { - .name = "d-link:green:planet", - .gpio = DIR825C1_GPIO_LED_BLUE_PLANET, - .active_low = 1, - }, -}; - -static struct gpio_keys_button dir825c1_gpio_keys[] __initdata = { - { - .desc = "Soft reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR825C1_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR825C1_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg dir825c1_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_led_cfg dir825c1_ar8327_led_cfg = { - .led_ctrl0 = 0x00000000, - .led_ctrl1 = 0xc737c737, - .led_ctrl2 = 0x00000000, - .led_ctrl3 = 0x00c30c00, - .open_drain = true, -}; - -static struct ar8327_platform_data dir825c1_ar8327_data = { - .pad0_cfg = &dir825c1_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &dir825c1_ar8327_led_cfg, -}; - -static struct mdio_board_info dir825c1_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &dir825c1_ar8327_data, - }, -}; - -static void __init dir825c1_generic_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000); - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 mac0[ETH_ALEN], mac1[ETH_ALEN]; - u8 wmac0[ETH_ALEN], wmac1[ETH_ALEN]; - - ath79_parse_ascii_mac(mac + DIR825C1_MAC0_OFFSET, mac0); - ath79_parse_ascii_mac(mac + DIR825C1_MAC1_OFFSET, mac1); - - ath79_register_m25p80(NULL); - - ath79_register_gpio_keys_polled(-1, DIR825C1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dir825c1_gpio_keys), - dir825c1_gpio_keys); - - ath79_init_mac(wmac0, mac0, 0); - ath79_register_wmac(art + DIR825C1_WMAC_CALDATA_OFFSET, wmac0); - - ath79_init_mac(wmac1, mac1, 1); - ap91_pci_init(art + DIR825C1_PCIE_CALDATA_OFFSET, wmac1); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); - - mdiobus_register_board_info(dir825c1_mdio0_info, - ARRAY_SIZE(dir825c1_mdio0_info)); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0); - - /* GMAC0 is connected to an AR8327N switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_register_eth(0); - - ath79_register_usb(); -} - -static void __init dir825c1_setup(void) -{ - ath79_gpio_output_select(DIR825C1_GPIO_LED_BLUE_USB, - AR934X_GPIO_OUT_GPIO); - - gpio_request_one(DIR825C1_GPIO_WAN_LED_ENABLE, - GPIOF_OUT_INIT_LOW, "WAN LED enable"); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825c1_leds_gpio), - dir825c1_leds_gpio); - - ap9x_pci_setup_wmac_led_pin(0, 0); - - dir825c1_generic_setup(); -} - -static void __init dir835a1_setup(void) -{ - dir825c1_ar8327_data.led_cfg = NULL; - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dir835a1_leds_gpio), - dir835a1_leds_gpio); - - dir825c1_generic_setup(); -} - -MIPS_MACHINE(ATH79_MACH_DIR_825_C1, "DIR-825-C1", - "D-Link DIR-825 rev. C1", - dir825c1_setup); - -MIPS_MACHINE(ATH79_MACH_DIR_835_A1, "DIR-835-A1", - "D-Link DIR-835 rev. A1", - dir835a1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-869-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-869-a1.c deleted file mode 100644 index 3841c3d5d5..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-869-a1.c +++ /dev/null @@ -1,175 +0,0 @@ -/* - * D-Link DIR-869 A1 support - * - * Copyright (C) 2015-2016 P. Wassi <p.wassi at gmx.at> - * Copyright (C) 2016 Matthias Schiffer <mschiffer@universe-factory.net> - * - * Derived from: mach-ubnt-unifiac.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - - -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/irq.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include <linux/platform_data/phy-at803x.h> -#include <linux/ar8216_platform.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "nvram.h" - - -#define DIR869A1_GPIO_BTN_RESET 1 -#define DIR869A1_GPIO_BTN_WPS 2 -#define DIR869A1_GPIO_SWITCH_MODE 8 - -#define DIR869A1_GPIO_ENABLE_SWITCH 11 - -#define DIR869A1_GPIO_LED_ORANGE 15 -#define DIR869A1_GPIO_LED_WHITE 16 - -#define DIR869A1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DIR869A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR869A1_KEYS_POLL_INTERVAL) - - -#define DIR869A1_DEVDATA_ADDR 0x1f050000 -#define DIR869A1_DEVDATA_SIZE 0x10000 - -#define DIR869A1_EEPROM_ADDR 0x1fff0000 -#define DIR869A1_WMAC_CALDATA_OFFSET 0x1000 -#define DIR869A1_PCI_CALDATA_OFFSET 0x5000 - - -static struct gpio_led dir869a1_leds_gpio[] __initdata = { - { - .name = "d-link:white:status", - .gpio = DIR869A1_GPIO_LED_WHITE, - .active_low = 1, - }, - { - .name = "d-link:orange:status", - .gpio = DIR869A1_GPIO_LED_ORANGE, - .active_low = 1, - }, -}; - -static struct gpio_keys_button dir869a1_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DIR869A1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR869A1_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DIR869A1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR869A1_GPIO_BTN_WPS, - .active_low = 1, - }, - { - .desc = "mode", - .type = EV_SW, - .code = BTN_0, - .debounce_interval = DIR869A1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR869A1_GPIO_SWITCH_MODE, - .active_low = 0, - }, -}; - - -static struct ar8327_pad_cfg dir869a1_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -static struct ar8327_platform_data dir869a1_ar8327_data = { - .pad0_cfg = &dir869a1_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - - -static struct mdio_board_info dir869a1_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &dir869a1_ar8327_data, - }, -}; - - -static void dir869a1_get_mac(const char *name, char *mac) -{ - u8 *nvram = (u8 *) KSEG1ADDR(DIR869A1_DEVDATA_ADDR); - int err; - - err = ath79_nvram_parse_mac_addr(nvram, DIR869A1_DEVDATA_SIZE, - name, mac); - if (err) - pr_err("no MAC address found for %s\n", name); -} - -static void __init dir869a1_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(DIR869A1_EEPROM_ADDR); - u8 wlan24mac[ETH_ALEN] = {}, wlan5mac[ETH_ALEN] = {}; - - ath79_register_m25p80(NULL); - - gpio_request_one(DIR869A1_GPIO_ENABLE_SWITCH, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "Switch power"); - - dir869a1_get_mac("lanmac=", ath79_eth0_data.mac_addr); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_mask = BIT(0); - - mdiobus_register_board_info(dir869a1_mdio0_info, - ARRAY_SIZE(dir869a1_mdio0_info)); - - ath79_register_mdio(0, 0); - ath79_register_eth(0); - - dir869a1_get_mac("wlan24mac=", wlan24mac); - ath79_register_wmac(eeprom + DIR869A1_WMAC_CALDATA_OFFSET, wlan24mac); - - dir869a1_get_mac("wlan5mac=", wlan5mac); - ap91_pci_init(eeprom + DIR869A1_PCI_CALDATA_OFFSET, wlan5mac); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dir869a1_leds_gpio), - dir869a1_leds_gpio); - - ath79_register_gpio_keys_polled(-1, DIR869A1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dir869a1_gpio_keys), - dir869a1_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_DIR_869_A1, "DIR-869-A1", "D-Link DIR-869 rev. A1", - dir869a1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-hotspot.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-hotspot.c deleted file mode 100644 index 3ae46514fc..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-hotspot.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * devolo dLAN Hotspot board support - * - * Copyright (C) 2015 Torsten Schnuis <torsten.schnuis@gik.de> - * Copyright (C) 2015 devolo AG - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define DLAN_HOTSPOT_GPIO_LED_WIFI 0 - -#define DLAN_HOTSPOT_GPIO_BTN_RESET 11 -#define DLAN_HOTSPOT_GPIO_BTN_PLC_PAIRING 12 -#define DLAN_HOTSPOT_GPIO_BTN_WIFI 21 - -#define DLAN_HOTSPOT_GPIO_PLC_POWER 22 -#define DLAN_HOTSPOT_GPIO_PLC_RESET 20 -#define DLAN_HOTSPOT_GPIO_PLC_DISABLE_LEDS 18 - -#define DLAN_HOTSPOT_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DLAN_HOTSPOT_KEYS_DEBOUNCE_INTERVAL (3 * DLAN_HOTSPOT_KEYS_POLL_INTERVAL) - -#define DLAN_HOTSPOT_ART_ADDRESS 0x1fff0000 -#define DLAN_HOTSPOT_CALDATA_OFFSET 0x00001000 -#define DLAN_HOTSPOT_MAC_ADDRESS_OFFSET 0x00001002 - -static struct gpio_led dlan_hotspot_leds_gpio[] __initdata = { - { - .name = "devolo:green:wifi", - .gpio = DLAN_HOTSPOT_GPIO_LED_WIFI, - .active_low = 0, - } -}; - -static struct gpio_keys_button dlan_hotspot_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DLAN_HOTSPOT_KEYS_DEBOUNCE_INTERVAL, - .gpio = DLAN_HOTSPOT_GPIO_BTN_RESET, - .active_low = 0, - }, - { - .desc = "Pairing button", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = DLAN_HOTSPOT_KEYS_DEBOUNCE_INTERVAL, - .gpio = DLAN_HOTSPOT_GPIO_BTN_PLC_PAIRING, - .active_low = 0, - }, - { - .desc = "WLAN button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DLAN_HOTSPOT_KEYS_DEBOUNCE_INTERVAL, - .gpio = DLAN_HOTSPOT_GPIO_BTN_WIFI, - .active_low = 0, - } -}; - -static void __init dlan_hotspot_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(DLAN_HOTSPOT_ART_ADDRESS); - u8 *cal = art + DLAN_HOTSPOT_CALDATA_OFFSET; - u8 *wifi_mac = art + DLAN_HOTSPOT_MAC_ADDRESS_OFFSET; - - /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dlan_hotspot_leds_gpio), - dlan_hotspot_leds_gpio); - - ath79_register_gpio_keys_polled(-1, DLAN_HOTSPOT_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dlan_hotspot_gpio_keys), - dlan_hotspot_gpio_keys); - - gpio_request_one(DLAN_HOTSPOT_GPIO_PLC_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "PLC power"); - gpio_request_one(DLAN_HOTSPOT_GPIO_PLC_RESET, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "PLC reset"); - gpio_request_one(DLAN_HOTSPOT_GPIO_PLC_DISABLE_LEDS, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "PLC LEDs"); - - ath79_register_usb(); - - ath79_register_m25p80(NULL); - - ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, wifi_mac, 2); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_wmac(cal, wifi_mac); -} - -MIPS_MACHINE(ATH79_MACH_DLAN_HOTSPOT, "dLAN-Hotspot", - "dLAN Hotspot", dlan_hotspot_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-1200-ac.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-1200-ac.c deleted file mode 100644 index 2100a9608d..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-1200-ac.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * devolo dLAN pro 500 Wireless+ support - * - * Copyright (c) 2013-2015 devolo AG - * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> -#include <linux/gpio.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-nfc.h" -#include "dev-spi.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define DLAN_PRO_1200_AC_GPIO_DLAN_POWER_ENABLE 13 -#define DLAN_PRO_1200_AC_GPIO_WLAN_POWER_ENABLE 21 -#define DLAN_PRO_1200_AC_GPIO_LED_WLAN 12 -#define DLAN_PRO_1200_AC_GPIO_LED_DLAN 14 -#define DLAN_PRO_1200_AC_GPIO_LED_DLAN_ERR 15 - -#define DLAN_PRO_1200_AC_GPIO_BTN_WLAN 20 -#define DLAN_PRO_1200_AC_GPIO_BTN_DLAN 22 -#define DLAN_PRO_1200_AC_GPIO_BTN_RESET 4 -#define DLAN_PRO_1200_AC_GPIO_DLAN_IND 17 -#define DLAN_PRO_1200_AC_GPIO_DLAN_ERR_IND 16 - -#define DLAN_PRO_1200_AC_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL (3 * DLAN_PRO_1200_AC_KEYS_POLL_INTERVAL) - -#define DLAN_PRO_1200_AC_ART_ADDRESS 0x1fff0000 -#define DLAN_PRO_1200_AC_CALDATA_OFFSET 0x1000 -#define DLAN_PRO_1200_AC_WIFIMAC_OFFSET 0x1002 -#define DLAN_PRO_1200_AC_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led dlan_pro_1200_ac_leds_gpio[] __initdata = { - { - .name = "devolo:status:wlan", - .gpio = DLAN_PRO_1200_AC_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "devolo:status:dlan", - .gpio = DLAN_PRO_1200_AC_GPIO_LED_DLAN, - .active_low = 1, - }, - { - .name = "devolo:error:dlan", - .gpio = DLAN_PRO_1200_AC_GPIO_LED_DLAN_ERR, - .active_low = 0, - } -}; - -static struct gpio_keys_button dlan_pro_1200_ac_gpio_keys[] __initdata = { - { - .desc = "dLAN button", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL, - .gpio = DLAN_PRO_1200_AC_GPIO_BTN_DLAN, - .active_low = 1, - }, - { - .desc = "WLAN button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL, - .gpio = DLAN_PRO_1200_AC_GPIO_BTN_WLAN, - .active_low = 0, - }, - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL, - .gpio = DLAN_PRO_1200_AC_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct ar8327_pad_cfg dlan_pro_1200_ac_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = false, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0, - .mac06_exchange_dis = true, -}; - -static struct ar8327_pad_cfg dlan_pro_1200_ac_ar8327_pad5_cfg = { - .mode = 0, - .txclk_delay_en = 0, - .rxclk_delay_en = 0, - .txclk_delay_sel = 0, - .rxclk_delay_sel = 0, -}; - -static struct ar8327_platform_data dlan_pro_1200_ac_ar8327_data = { - .pad0_cfg = &dlan_pro_1200_ac_ar8327_pad0_cfg, - .pad5_cfg = &dlan_pro_1200_ac_ar8327_pad5_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info dlan_pro_1200_ac_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &dlan_pro_1200_ac_ar8327_data, - }, -}; - -static void __init dlan_pro_1200_ac_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(DLAN_PRO_1200_AC_ART_ADDRESS); - u8 *cal = art + DLAN_PRO_1200_AC_CALDATA_OFFSET; - u8 *wifi_mac = art + DLAN_PRO_1200_AC_WIFIMAC_OFFSET; - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dlan_pro_1200_ac_leds_gpio), - dlan_pro_1200_ac_leds_gpio); - - ath79_register_gpio_keys_polled(-1, DLAN_PRO_1200_AC_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dlan_pro_1200_ac_gpio_keys), - dlan_pro_1200_ac_gpio_keys); - - /* dLAN power must be enabled from user-space as soon as the boot-from-host daemon is running */ - gpio_request_one(DLAN_PRO_1200_AC_GPIO_DLAN_POWER_ENABLE, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "dLAN power"); - - /* WLAN power is turned on initially to allow the PCI bus scan to succeed */ - gpio_request_one(DLAN_PRO_1200_AC_GPIO_WLAN_POWER_ENABLE, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "WLAN power"); - - ath79_register_wmac(cal, wifi_mac); - ap91_pci_init(art + DLAN_PRO_1200_AC_PCIE_CALDATA_OFFSET, NULL); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE); - - ath79_register_mdio(1, 0x0); - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, 2); - - mdiobus_register_board_info(dlan_pro_1200_ac_mdio0_info, - ARRAY_SIZE(dlan_pro_1200_ac_mdio0_info)); - - /* GMAC0 is connected to an AR8337 */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x02000000; - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_DLAN_PRO_1200_AC, "dLAN-pro-1200-ac", "devolo dLAN pro 1200+ WiFi ac", - dlan_pro_1200_ac_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c deleted file mode 100644 index 931eafffcb..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c +++ /dev/null @@ -1,203 +0,0 @@ -/* - * devolo dLAN pro 500 Wireless+ support - * - * Copyright (c) 2013-2015 devolo AG - * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> -#include <linux/gpio.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define DLAN_PRO_500_WP_GPIO_DLAN_POWER_ENABLE 13 -#define DLAN_PRO_500_WP_GPIO_DLAN_LED_ENABLE 17 -#define DLAN_PRO_500_WP_GPIO_LED_WLAN_5G 11 -#define DLAN_PRO_500_WP_GPIO_LED_WLAN_2G 12 -#define DLAN_PRO_500_WP_GPIO_LED_STATUS 16 -#define DLAN_PRO_500_WP_GPIO_LED_ETH 14 - -#define DLAN_PRO_500_WP_GPIO_BTN_WPS 20 -#define DLAN_PRO_500_WP_GPIO_BTN_WLAN 22 -#define DLAN_PRO_500_WP_GPIO_BTN_DLAN 21 -#define DLAN_PRO_500_WP_GPIO_BTN_RESET 4 - -#define DLAN_PRO_500_WP_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL (3 * DLAN_PRO_500_WP_KEYS_POLL_INTERVAL) - -#define DLAN_PRO_500_WP_ART_ADDRESS 0x1fff0000 -#define DLAN_PRO_500_WP_CALDATA_OFFSET 0x1000 -#define DLAN_PRO_500_WP_MAC_ADDRESS_OFFSET 0x1002 -#define DLAN_PRO_500_WP_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led dlan_pro_500_wp_leds_gpio[] __initdata = { - { - .name = "devolo:green:status", - .gpio = DLAN_PRO_500_WP_GPIO_LED_STATUS, - .active_low = 1, - }, - { - .name = "devolo:green:eth", - .gpio = DLAN_PRO_500_WP_GPIO_LED_ETH, - .active_low = 1, - }, - { - .name = "devolo:blue:wlan-5g", - .gpio = DLAN_PRO_500_WP_GPIO_LED_WLAN_5G, - .active_low = 1, - }, - { - .name = "devolo:green:wlan-2g", - .gpio = DLAN_PRO_500_WP_GPIO_LED_WLAN_2G, - .active_low = 1, - } -}; - -static struct gpio_keys_button dlan_pro_500_wp_gpio_keys[] __initdata = { - { - .desc = "dLAN button", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL, - .gpio = DLAN_PRO_500_WP_GPIO_BTN_DLAN, - .active_low = 0, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL, - .gpio = DLAN_PRO_500_WP_GPIO_BTN_WPS, - .active_low = 0, - }, - { - .desc = "WLAN button", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL, - .gpio = DLAN_PRO_500_WP_GPIO_BTN_WLAN, - .active_low = 1, - }, - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL, - .gpio = DLAN_PRO_500_WP_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct ar8327_pad_cfg dlan_pro_500_wp_ar8327_pad0_cfg = { - .mode = AR8327_PAD_PHY_RGMII, - .txclk_delay_en = false, - .rxclk_delay_en = false, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL0, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0, -}; - -static struct ar8327_led_cfg dlan_pro_500_wp_ar8327_led_cfg = { - .led_ctrl0 = 0x00000000, - .led_ctrl1 = 0xc737c737, - .led_ctrl2 = 0x00000000, - .led_ctrl3 = 0x00c30c00, - .open_drain = true, -}; - -static struct ar8327_platform_data dlan_pro_500_wp_ar8327_data = { - .pad0_cfg = &dlan_pro_500_wp_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 0, - .rxpause = 0, - }, - .led_cfg = &dlan_pro_500_wp_ar8327_led_cfg, -}; - -static struct mdio_board_info dlan_pro_500_wp_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &dlan_pro_500_wp_ar8327_data, - }, -}; - -static void __init dlan_pro_500_wp_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(DLAN_PRO_500_WP_ART_ADDRESS); - u8 *cal = art + DLAN_PRO_500_WP_CALDATA_OFFSET; - u8 *wifi_mac = art + DLAN_PRO_500_WP_MAC_ADDRESS_OFFSET; - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dlan_pro_500_wp_leds_gpio), - dlan_pro_500_wp_leds_gpio); - - ath79_register_gpio_keys_polled(-1, DLAN_PRO_500_WP_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dlan_pro_500_wp_gpio_keys), - dlan_pro_500_wp_gpio_keys); - - gpio_request_one(DLAN_PRO_500_WP_GPIO_DLAN_POWER_ENABLE, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "PLC power"); - gpio_request_one(DLAN_PRO_500_WP_GPIO_DLAN_LED_ENABLE, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "PLC LEDs"); - - ath79_register_wmac(cal, wifi_mac); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); - - ath79_register_mdio(1, 0x0); - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(dlan_pro_500_wp_mdio0_info, - ARRAY_SIZE(dlan_pro_500_wp_mdio0_info)); - - /* GMAC0 is connected to a AR7400 PLC in PHY mode */ - ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, 2); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_pll_data.pll_1000 = 0x0e000000; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_register_eth(0); - - /* GMAC1 is connected to the internal switch */ - ath79_init_mac(ath79_eth1_data.mac_addr, wifi_mac, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_register_eth(1); -} - -MIPS_MACHINE(ATH79_MACH_DLAN_PRO_500_WP, "dLAN-pro-500-wp", "devolo dLAN pro 500 Wireless+", - dlan_pro_500_wp_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-domywifi-dw33d.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-domywifi-dw33d.c deleted file mode 100644 index ac4aa8eadf..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-domywifi-dw33d.c +++ /dev/null @@ -1,192 +0,0 @@ -/* - * DomyWifi DW33D support - * - * Copyright (c) 2012 Qualcomm Atheros - * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/version.h> -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> -#include <linux/mtd/mtd.h> -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0) -#include <linux/mtd/nand.h> -#else -#include <linux/mtd/rawnand.h> -#endif -#include <linux/platform/ar934x_nfc.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-nfc.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define DW33D_GPIO_LED_MMC 4 -#define DW33D_GPIO_LED_WLAN_2G 13 -#define DW33D_GPIO_LED_STATUS 14 -#define DW33D_GPIO_LED_USB 15 -#define DW33D_GPIO_LED_INTERNET 22 - -#define DW33D_GPIO_BTN_RESET 17 - -#define DW33D_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DW33D_KEYS_DEBOUNCE_INTERVAL (3 * DW33D_KEYS_POLL_INTERVAL) - -#define DW33D_MAC0_OFFSET 0 -#define DW33D_MAC1_OFFSET 6 -#define DW33D_WMAC_OFFSET 12 -#define DW33D_WMAC_CALDATA_OFFSET 0x1000 -#define DW33D_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led dw33d_leds_gpio[] __initdata = { - { - .name = "dw33d:blue:status", - .gpio = DW33D_GPIO_LED_STATUS, - .active_low = 1, - }, - { - .name = "dw33d:blue:mmc", - .gpio = DW33D_GPIO_LED_MMC, - .active_low = 1, - }, - { - .name = "dw33d:blue:usb", - .gpio = DW33D_GPIO_LED_USB, - .active_low = 1, - }, - { - .name = "dw33d:blue:wlan-2g", - .gpio = DW33D_GPIO_LED_WLAN_2G, - .active_low = 1, - }, - { - .name = "dw33d:blue:internet", - .gpio = DW33D_GPIO_LED_INTERNET, - .active_low = 1, - } -}; - -static struct gpio_keys_button dw33d_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DW33D_KEYS_DEBOUNCE_INTERVAL, - .gpio = DW33D_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -/* GMAC6 of the QCA8337 switch is connected to the QCA9558 SoC via SGMII */ -static struct ar8327_pad_cfg dw33d_qca8337_pad6_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -/* GMAC0 of the QCA8337 switch is connected to the QCA9558 SoC via RGMII */ -static struct ar8327_pad_cfg dw33d_qca8337_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_platform_data dw33d_qca8337_data = { - .pad0_cfg = &dw33d_qca8337_pad0_cfg, - .pad6_cfg = &dw33d_qca8337_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .port6_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info dw33d_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &dw33d_qca8337_data, - }, -}; - -static void __init dw33d_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dw33d_leds_gpio), - dw33d_leds_gpio); - ath79_register_gpio_keys_polled(-1, DW33D_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dw33d_gpio_keys), - dw33d_gpio_keys); - - ath79_register_usb(); - ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW); - ath79_register_nfc(); - ath79_register_pci(); - - ath79_register_wmac(art + DW33D_WMAC_CALDATA_OFFSET, art + DW33D_WMAC_OFFSET); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + DW33D_MAC0_OFFSET, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, art + DW33D_MAC1_OFFSET, 0); - - mdiobus_register_board_info(dw33d_mdio0_info, - ARRAY_SIZE(dw33d_mdio0_info)); - - /* GMAC0 is connected to the RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x56000000; - - ath79_register_eth(0); - - /* GMAC1 is connected tot eh SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_pll_data.pll_1000 = 0x03000101; - - ath79_register_eth(1); -} - -MIPS_MACHINE(ATH79_MACH_DOMYWIFI_DW33D, "DW33D", - "DomyWifi DW33D", - dw33d_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dr344.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dr344.c deleted file mode 100644 index 888c9c949f..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dr344.c +++ /dev/null @@ -1,224 +0,0 @@ -/* - * Wallys DR342/DR344 boards support - * - * Copyright (c) 2011 Qualcomm Atheros - * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2015 Philippe Duchein <wireless-dev@duchein.net> - * Copyright (c) 2017 Piotr Dymacz <pepe2k@gmail.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/gpio.h> -#include <linux/phy.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/platform_data/phy-at803x.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-usb.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define DR34X_GPIO_LED_SIG1 12 -#define DR34X_GPIO_LED_SIG2 13 -#define DR34X_GPIO_LED_SIG3 14 -#define DR34X_GPIO_LED_SIG4 15 -#define DR34X_GPIO_LED_STATUS 11 -#define DR344_GPIO_LED_LAN 17 -#define DR344_GPIO_EXTERNAL_LNA0 18 -#define DR344_GPIO_EXTERNAL_LNA1 19 - -#define DR34X_GPIO_BTN_RESET 16 - -#define DR344_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DR344_KEYS_DEBOUNCE_INTERVAL (3 * DR344_KEYS_POLL_INTERVAL) - -#define DR34X_MAC0_OFFSET 0 -#define DR34X_MAC1_OFFSET 8 -#define DR34X_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led dr342_leds_gpio[] __initdata = { - { - .name = "dr342:green:status", - .gpio = DR34X_GPIO_LED_STATUS, - .active_low = 1, - }, - { - .name = "dr342:green:sig1", - .gpio = DR34X_GPIO_LED_SIG1, - .active_low = 1, - }, - { - .name = "dr342:green:sig2", - .gpio = DR34X_GPIO_LED_SIG2, - .active_low = 1, - }, - { - .name = "dr342:green:sig3", - .gpio = DR34X_GPIO_LED_SIG3, - .active_low = 1, - }, - { - .name = "dr342:green:sig4", - .gpio = DR34X_GPIO_LED_SIG4, - .active_low = 1, - } -}; - -static struct gpio_led dr344_leds_gpio[] __initdata = { - { - .name = "dr344:green:lan", - .gpio = DR344_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "dr344:green:status", - .gpio = DR34X_GPIO_LED_STATUS, - .active_low = 1, - }, - { - .name = "dr344:green:sig1", - .gpio = DR34X_GPIO_LED_SIG1, - .active_low = 1, - }, - { - .name = "dr344:green:sig2", - .gpio = DR34X_GPIO_LED_SIG2, - .active_low = 1, - }, - { - .name = "dr344:green:sig3", - .gpio = DR34X_GPIO_LED_SIG3, - .active_low = 1, - }, - { - .name = "dr344:green:sig4", - .gpio = DR34X_GPIO_LED_SIG4, - .active_low = 1, - } -}; - -static struct gpio_keys_button dr34x_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DR344_KEYS_DEBOUNCE_INTERVAL, - .gpio = DR34X_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct at803x_platform_data dr34x_at803x_data = { - .disable_smarteee = 1, - .enable_rgmii_rx_delay = 1, - .enable_rgmii_tx_delay = 1, -}; - -static struct mdio_board_info dr34x_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &dr34x_at803x_data, - }, -}; - -static void __init dr34x_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac = (u8 *) KSEG1ADDR(0x1f03f810); - - ath79_register_m25p80(NULL); - - ath79_gpio_direction_select(DR34X_GPIO_LED_STATUS, true); - gpio_set_value(DR34X_GPIO_LED_STATUS, 1); - ath79_gpio_output_select(DR34X_GPIO_LED_STATUS, 0); - - ath79_register_gpio_keys_polled(-1, DR344_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dr34x_gpio_keys), - dr34x_gpio_keys); - - ath79_register_usb(); - - ath79_register_wmac(art + DR34X_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_pci(); - - mdiobus_register_board_info(dr34x_mdio0_info, - ARRAY_SIZE(dr34x_mdio0_info)); - - ath79_register_mdio(0, 0x0); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | - AR934X_ETH_CFG_SW_ONLY_MODE); - - /* GMAC0 is connected to an AR8035 Gbps PHY */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x02000000; - ath79_eth0_pll_data.pll_100 = 0x0101; - ath79_eth0_pll_data.pll_10 = 0x1313; - - ath79_init_mac(ath79_eth0_data.mac_addr, mac + DR34X_MAC0_OFFSET, 0); - ath79_register_eth(0); -} - -static void __init dr342_setup(void) -{ - dr34x_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dr342_leds_gpio), - dr342_leds_gpio); -} - -static void __init dr344_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f03f810); - - dr34x_setup(); - - ath79_gpio_direction_select(DR344_GPIO_LED_LAN, true); - gpio_set_value(DR344_GPIO_LED_LAN, 1); - ath79_gpio_output_select(DR344_GPIO_LED_LAN, 0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dr344_leds_gpio), - dr344_leds_gpio); - - ath79_wmac_set_ext_lna_gpio(0, DR344_GPIO_EXTERNAL_LNA0); - ath79_wmac_set_ext_lna_gpio(1, DR344_GPIO_EXTERNAL_LNA1); - - ath79_register_mdio(1, 0x0); - - /* GMAC1 is connected to the internal switch */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_init_mac(ath79_eth1_data.mac_addr, mac + DR34X_MAC1_OFFSET, 0); - ath79_register_eth(1); -} - -MIPS_MACHINE(ATH79_MACH_DR342, "DR342", "Wallys DR342", dr342_setup); -MIPS_MACHINE(ATH79_MACH_DR344, "DR344", "Wallys DR344", dr344_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dr531.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dr531.c deleted file mode 100644 index b638a9001c..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dr531.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * Wallys DR531 board support - * - * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com> - * - * Based on mach-wpj531.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define DR531_GPIO_BUZZER 4 -#define DR531_GPIO_LED_WAN 11 -#define DR531_GPIO_LED_LAN 14 -#define DR531_GPIO_LED_SIG1 12 -#define DR531_GPIO_LED_SIG2 16 -#define DR531_GPIO_LED_SIG3 15 -#define DR531_GPIO_LED_SIG4 13 - -#define DR531_GPIO_BTN_RESET 17 - -#define DR531_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DR531_KEYS_DEBOUNCE_INTERVAL (3 * DR531_KEYS_POLL_INTERVAL) - -#define DR531_MAC0_OFFSET 0x0 -#define DR531_MAC1_OFFSET 0x8 -#define DR531_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led dr531_leds_gpio[] __initdata = { - { - .name = "dr531:green:wan", - .gpio = DR531_GPIO_LED_WAN, - .active_low = 1, - }, - { - .name = "dr531:green:lan", - .gpio = DR531_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "dr531:green:sig1", - .gpio = DR531_GPIO_LED_SIG1, - .active_low = 1, - }, - { - .name = "dr531:green:sig2", - .gpio = DR531_GPIO_LED_SIG2, - .active_low = 1, - }, - { - .name = "dr531:green:sig3", - .gpio = DR531_GPIO_LED_SIG3, - .active_low = 1, - }, - { - .name = "dr531:green:sig4", - .gpio = DR531_GPIO_LED_SIG4, - .active_low = 1, - }, - { - .name = "dr531:buzzer", - .gpio = DR531_GPIO_BUZZER, - .active_low = 0, - } -}; - -static struct gpio_keys_button dr531_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DR531_KEYS_DEBOUNCE_INTERVAL, - .gpio = DR531_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static void __init dr531_gpio_setup(void) -{ - ath79_gpio_direction_select(DR531_GPIO_BUZZER, true); - ath79_gpio_direction_select(DR531_GPIO_LED_WAN, true); - ath79_gpio_direction_select(DR531_GPIO_LED_LAN, true); - ath79_gpio_direction_select(DR531_GPIO_LED_SIG1, true); - ath79_gpio_direction_select(DR531_GPIO_LED_SIG2, true); - ath79_gpio_direction_select(DR531_GPIO_LED_SIG3, true); - ath79_gpio_direction_select(DR531_GPIO_LED_SIG4, true); - - ath79_gpio_output_select(DR531_GPIO_BUZZER, 0); - ath79_gpio_output_select(DR531_GPIO_LED_WAN, 0); - ath79_gpio_output_select(DR531_GPIO_LED_LAN, 0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dr531_leds_gpio), - dr531_leds_gpio); - - ath79_register_gpio_keys_polled(-1, DR531_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dr531_gpio_keys), - dr531_gpio_keys); -} - -static void __init dr531_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac = (u8 *) KSEG1ADDR(0x1f03f810); - - ath79_register_m25p80(NULL); - - dr531_gpio_setup(); - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_mdio(0, 0x0); - - /* LAN */ - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.phy_mask = BIT(4); - ath79_init_mac(ath79_eth0_data.mac_addr, mac + DR531_MAC1_OFFSET, 0); - ath79_register_eth(0); - - /* WAN */ - ath79_switch_data.phy4_mii_en = 1; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_switch_data.phy_poll_mask |= BIT(4); - ath79_init_mac(ath79_eth1_data.mac_addr, mac + DR531_MAC0_OFFSET, 0); - ath79_register_eth(1); - - ath79_register_wmac(art + DR531_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_pci(); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_DR531, "DR531", "Wallys DR531", dr531_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dragino2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dragino2.c deleted file mode 100644 index 95bd6f41a3..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dragino2.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * DRAGINO V2 board support, based on Atheros AP121 board support - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2012 Elektra Wagenrad <elektra@villagetelco.org> - * Copyright (C) 2014 Vittorio Gambaletta <openwrt@vittgam.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define DRAGINO2_GPIO_LED_WLAN 0 -#define DRAGINO2_GPIO_LED_LAN 13 -#define DRAGINO2_GPIO_LED_WAN 17 - -/* - * The following GPIO is named "SYS" on newer revisions of the the board. - * It was previously used to indicate USB activity, even though it was - * named "Router". - */ - -#define DRAGINO2_GPIO_LED_SYS 28 -#define DRAGINO2_GPIO_BTN_JUMPSTART 11 -#define DRAGINO2_GPIO_BTN_RESET 12 - -#define DRAGINO2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DRAGINO2_KEYS_DEBOUNCE_INTERVAL (3 * DRAGINO2_KEYS_POLL_INTERVAL) - -#define DRAGINO2_MAC0_OFFSET 0x0000 -#define DRAGINO2_MAC1_OFFSET 0x0006 -#define DRAGINO2_CALDATA_OFFSET 0x1000 -#define DRAGINO2_WMAC_MAC_OFFSET 0x1002 - -static struct gpio_led dragino2_leds_gpio[] __initdata = { - { - .name = "dragino2:red:wlan", - .gpio = DRAGINO2_GPIO_LED_WLAN, - .active_low = 0, - }, - { - .name = "dragino2:red:wan", - .gpio = DRAGINO2_GPIO_LED_WAN, - .active_low = 1, - }, - { - .name = "dragino2:red:lan", - .gpio = DRAGINO2_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "dragino2:red:system", - .gpio = DRAGINO2_GPIO_LED_SYS, - .active_low = 0, - }, -}; - -static struct gpio_keys_button dragino2_gpio_keys[] __initdata = { - { - .desc = "jumpstart button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DRAGINO2_KEYS_DEBOUNCE_INTERVAL, - .gpio = DRAGINO2_GPIO_BTN_JUMPSTART, - .active_low = 1, - }, - { - .desc = "reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DRAGINO2_KEYS_DEBOUNCE_INTERVAL, - .gpio = DRAGINO2_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init dragino2_common_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - ath79_register_wmac(art + DRAGINO2_CALDATA_OFFSET, - art + DRAGINO2_WMAC_MAC_OFFSET); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + DRAGINO2_MAC0_OFFSET, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, art + DRAGINO2_MAC1_OFFSET, 0); - - ath79_register_mdio(0, 0x0); - - /* Enable GPIO13, GPIO14, GPIO15, GPIO16 and GPIO17 */ - ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - /* LAN port */ - ath79_register_eth(1); - - /* WAN port */ - ath79_register_eth(0); - - /* Enable GPIO26 and GPIO27 */ - ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, - ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP) | - AR933X_BOOTSTRAP_MDIO_GPIO_EN); -} - -static void __init dragino2_setup(void) -{ - dragino2_common_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dragino2_leds_gpio), - dragino2_leds_gpio); - ath79_register_gpio_keys_polled(-1, DRAGINO2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dragino2_gpio_keys), - dragino2_gpio_keys); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_DRAGINO2, "DRAGINO2", "Dragino Dragino v2", - dragino2_setup); - diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-e1700ac-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-e1700ac-v2.c deleted file mode 100644 index 1ba47a4255..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-e1700ac-v2.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Qxwlan E1700AC v2 board support - * - * Copyright (C) 2017 Peng Zhang <sd20@qxwlan.com> - * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define E1700AC_V2_GPIO_LED_SYS 1 -#define E1700AC_V2_GPIO_LED_USB 7 -#define E1700AC_V2_GPIO_LED_WLAN2G 19 - -#define E1700AC_V2_GPIO_BTN_SW1 2 -#define E1700AC_V2_GPIO_BTN_RESET 11 - -#define E1700AC_V2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define E1700AC_V2_KEYS_DEBOUNCE_INTERVAL \ - (3 * E1700AC_V2_KEYS_POLL_INTERVAL) - -static struct gpio_led e1700ac_v2_leds_gpio[] __initdata = { - { - .name = "e1700ac-v2:green:system", - .gpio = E1700AC_V2_GPIO_LED_SYS, - .active_low = 1, - }, { - .name = "e1700ac-v2:green:usb", - .gpio = E1700AC_V2_GPIO_LED_USB, - .active_low = 1, - }, { - .name = "e1700ac-v2:green:wlan2g", - .gpio = E1700AC_V2_GPIO_LED_WLAN2G, - .active_low = 1, - }, -}; - -static struct gpio_keys_button e1700ac_v2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = E1700AC_V2_KEYS_DEBOUNCE_INTERVAL, - .gpio = E1700AC_V2_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "sw1", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = E1700AC_V2_KEYS_DEBOUNCE_INTERVAL, - .gpio = E1700AC_V2_GPIO_BTN_SW1, - .active_low = 1, - }, -}; - -static const struct ar8327_led_info e1700ac_v2_leds_qca8334[] = { - AR8327_LED_INFO(PHY1_0, HW, "e1700ac-v2:green:lan"), - AR8327_LED_INFO(PHY2_0, HW, "e1700ac-v2:green:wan"), -}; - -/* Blink rate: 1 Gbps -> 8 hz, 100 Mbs -> 4 Hz, 10 Mbps -> 2 Hz */ -static struct ar8327_led_cfg e1700ac_v2_qca8334_led_cfg = { - .led_ctrl0 = 0xcf37cf37, - .led_ctrl1 = 0xcf37cf37, - .led_ctrl2 = 0xcf37cf37, - .led_ctrl3 = 0x0, - .open_drain = true, -}; - -static struct ar8327_pad_cfg e1700ac_v2_qca8334_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -static struct ar8327_platform_data e1700ac_v2_qca8334_data = { - .pad0_cfg = &e1700ac_v2_qca8334_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &e1700ac_v2_qca8334_led_cfg, - .leds = e1700ac_v2_leds_qca8334, - .num_leds = ARRAY_SIZE(e1700ac_v2_leds_qca8334), -}; - -static struct mdio_board_info e1700ac_v2_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &e1700ac_v2_qca8334_data, - }, -}; - -static void __init e1700ac_v2_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f050400); - u8 *art = (u8 *) KSEG1ADDR(0x1f061000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(e1700ac_v2_leds_gpio), - e1700ac_v2_leds_gpio); - - ath79_register_gpio_keys_polled(-1, E1700AC_V2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(e1700ac_v2_gpio_keys), - e1700ac_v2_gpio_keys); - - ath79_register_mdio(0, 0x0); - mdiobus_register_board_info(e1700ac_v2_mdio0_info, - ARRAY_SIZE(e1700ac_v2_mdio0_info)); - - /* GMAC0 is connected to QCA8334 switch */ - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_pll_data.pll_1000 = 0x03000101; - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_register_eth(0); - - ath79_register_pci(); - ath79_register_usb(); - ath79_register_wmac(art, NULL); -} - -MIPS_MACHINE(ATH79_MACH_E1700AC_V2, "E1700AC-V2", "Qxwlan E1700AC v2", - e1700ac_v2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-e2100l.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-e2100l.c deleted file mode 100644 index c09083460e..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-e2100l.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Linksys E2100L board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "nvram.h" -#include "machtypes.h" - -#define E2100L_GPIO_LED_POWER 14 -#define E2100L_GPIO_LED_WPS_AMBER 9 -#define E2100L_GPIO_LED_WPS_BLUE 8 -#define E2100L_GPIO_LED_WLAN 6 - -#define E2100L_GPIO_BTN_WPS 7 -#define E2100L_GPIO_BTN_RESET 21 - -#define E2100L_KEYS_POLL_INTERVAL 20 /* msecs */ -#define E2100L_KEYS_DEBOUNCE_INTERVAL (3 * E2100L_KEYS_POLL_INTERVAL) - -#define E2100L_NVRAM_ADDR 0x1f7e0000 -#define E2100L_NVRAM_SIZE 0x10000 - -static const char *e2100l_part_probes[] = { - "cybertan", - NULL, -}; - -static struct flash_platform_data e2100l_flash_data = { - .part_probes = e2100l_part_probes, -}; - -static struct gpio_led e2100l_leds_gpio[] __initdata = { - { - .name = "e2100l:blue:power", - .gpio = E2100L_GPIO_LED_POWER, - .active_low = 1, - .default_trigger = "default-on", - }, { - .name = "e2100l:amber:wps", - .gpio = E2100L_GPIO_LED_WPS_AMBER, - .active_low = 1, - }, { - .name = "e2100l:blue:wps", - .gpio = E2100L_GPIO_LED_WPS_BLUE, - .active_low = 1, - }, { - .name = "e2100l:blue:wlan", - .gpio = E2100L_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button e2100l_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = E2100L_KEYS_DEBOUNCE_INTERVAL, - .gpio = E2100L_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = E2100L_KEYS_DEBOUNCE_INTERVAL, - .gpio = E2100L_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static void __init e2100l_setup(void) -{ - const char *nvram = (char *) KSEG1ADDR(E2100L_NVRAM_ADDR); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - u8 mac[6]; - - if (ath79_nvram_parse_mac_addr(nvram, E2100L_NVRAM_SIZE, - "lan_hwaddr=", mac) == 0) { - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - } - - ath79_register_mdio(0, 0x0); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.phy_mask = 0x01; - - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = 0x10; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(&e2100l_flash_data); - - ath79_register_usb(); - - if (ath79_nvram_parse_mac_addr(nvram, E2100L_NVRAM_SIZE, - "wl0_hwaddr=", mac) == 0) - ath79_register_wmac(eeprom, mac); - else - ath79_register_wmac(eeprom, NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(e2100l_leds_gpio), - e2100l_leds_gpio); - - ath79_register_gpio_keys_polled(-1, E2100L_KEYS_POLL_INTERVAL, - ARRAY_SIZE(e2100l_gpio_keys), - e2100l_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_E2100L, "E2100L", "Linksys E2100L", - e2100l_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-e558-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-e558-v2.c deleted file mode 100644 index cc08147209..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-e558-v2.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * Qxwlan E558 v2 board support - * - * Copyright (C) 2017 Peng Zhang <sd20@qxwlan.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define E558_V2_GPIO_LED_WLAN 13 -#define E558_V2_GPIO_LED_SYSTEM 14 -#define E558_V2_GPIO_LED_QSS 15 - -#define E558_V2_GPIO_BTN_RESET 16 - -#define E558_V2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define E558_V2_KEYS_DEBOUNCE_INTERVAL (3 * E558_V2_KEYS_POLL_INTERVAL) - -static struct gpio_led e558_v2_leds_gpio[] __initdata = { - { - .name = "e558-v2:green:qss", - .gpio = E558_V2_GPIO_LED_QSS, - .active_low = 1, - }, - { - .name = "e558-v2:green:system", - .gpio = E558_V2_GPIO_LED_SYSTEM, - .active_low = 1, - }, - { - .name = "e558-v2:green:wlan", - .gpio = E558_V2_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button e558_v2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = E558_V2_KEYS_DEBOUNCE_INTERVAL, - .gpio = E558_V2_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */ -static struct ar8327_pad_cfg e558_v2_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */ -static struct ar8327_pad_cfg e558_v2_ar8327_pad6_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static const struct ar8327_led_info e558_v2_leds_qca8334[] = { - AR8327_LED_INFO(PHY2_0, HW, "e558-v2:green:wan"), - AR8327_LED_INFO(PHY3_0, HW, "e558-v2:green:lan1"), - AR8327_LED_INFO(PHY4_0, HW, "e558-v2:green:lan2"), -}; - -static struct ar8327_led_cfg e558_v2_ar8327_led_cfg = { - .led_ctrl0 = 0xc737c737, - .led_ctrl1 = 0x00000000, - .led_ctrl2 = 0x00000000, - .led_ctrl3 = 0x0030c300, - .open_drain = false, -}; - -static struct ar8327_platform_data e558_v2_ar8327_data = { - .pad0_cfg = &e558_v2_ar8327_pad0_cfg, - .pad6_cfg = &e558_v2_ar8327_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .port6_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &e558_v2_ar8327_led_cfg, - .leds = e558_v2_leds_qca8334, - .num_leds = ARRAY_SIZE(e558_v2_leds_qca8334), -}; - -static struct mdio_board_info e558_v2_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &e558_v2_ar8327_data, - }, -}; - -static void __init e558_v2_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f050400); - u8 *art = (u8 *) KSEG1ADDR(0x1f061000); - - ath79_register_m25p80(NULL); - ath79_register_leds_gpio(-1, ARRAY_SIZE(e558_v2_leds_gpio), - e558_v2_leds_gpio); - - ath79_register_gpio_keys_polled(-1, E558_V2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(e558_v2_gpio_keys), - e558_v2_gpio_keys); - - ath79_register_mdio(0, 0x0); - mdiobus_register_board_info(e558_v2_mdio0_info, - ARRAY_SIZE(e558_v2_mdio0_info)); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - /* GMAC0 is connected to the RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x56000000; - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_register_eth(0); - - /* GMAC1 is connected to the SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_pll_data.pll_1000 = 0x03000101; - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - ath79_register_eth(1); - - ath79_register_pci(); - ath79_register_usb(); - ath79_register_wmac(art, NULL); -} - -MIPS_MACHINE(ATH79_MACH_E558_V2, "E558-V2", "Qxwlan E558 v2", - e558_v2_setup); - diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-e600g-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-e600g-v2.c deleted file mode 100644 index 29411dea86..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-e600g-v2.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - * Qxwlan E600G/E600GAC v2 board support - * - * Copyright (C) 2017 Peng Zhang <sd20@qxwlan.com> - * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define E600G_V2_GPIO_LED_LAN 16 -#define E600G_V2_GPIO_LED_SYS 13 -#define E600G_V2_GPIO_LED_WAN_B 4 -#define E600G_V2_GPIO_LED_WAN_G 15 - -#define E600GAC_V2_GPIO_LED_CTRL_B 14 -#define E600GAC_V2_GPIO_LED_CTRL_G 11 -#define E600GAC_V2_GPIO_LED_CTRL_R 12 -#define E600GAC_V2_GPIO_LED_LAN 16 -#define E600GAC_V2_GPIO_LED_SYS 13 -#define E600GAC_V2_GPIO_LED_WAN_G 15 -#define E600GAC_V2_GPIO_LED_WAN_O 4 - -#define E600G_V2_GPIO_BTN_RESET 17 -#define E600GAC_V2_GPIO_BTN_WPS 1 - -#define E600G_V2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define E600G_V2_KEYS_DEBOUNCE_INTERVAL (3 * E600G_V2_KEYS_POLL_INTERVAL) - -static struct gpio_led e600g_v2_leds_gpio[] __initdata = { - { - .name = "e600g-v2:blue:system", - .gpio = E600G_V2_GPIO_LED_SYS, - .active_low = 1, - }, { - .name = "e600g-v2:blue:wan", - .gpio = E600G_V2_GPIO_LED_WAN_B, - .active_low = 1, - }, { - .name = "e600g-v2:green:lan", - .gpio = E600G_V2_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "e600g-v2:green:wan", - .gpio = E600G_V2_GPIO_LED_WAN_G, - .active_low = 1, - }, -}; - -static struct gpio_led e600gac_v2_leds_gpio[] __initdata = { - { - .name = "e600gac-v2:blue:control", - .gpio = E600GAC_V2_GPIO_LED_CTRL_B, - .active_low = 1, - }, { - .name = "e600gac-v2:green:control", - .gpio = E600GAC_V2_GPIO_LED_CTRL_G, - .active_low = 1, - }, { - .name = "e600gac-v2:red:control", - .gpio = E600GAC_V2_GPIO_LED_CTRL_R, - .active_low = 1, - }, { - .name = "e600gac-v2:green:system", - .gpio = E600GAC_V2_GPIO_LED_SYS, - .active_low = 1, - }, { - .name = "e600gac-v2:orange:wan", - .gpio = E600GAC_V2_GPIO_LED_WAN_O, - .active_low = 1, - }, { - .name = "e600gac-v2:green:lan", - .gpio = E600GAC_V2_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "e600gac-v2:green:wan", - .gpio = E600GAC_V2_GPIO_LED_WAN_G, - .active_low = 1, - }, -}; - -static struct gpio_keys_button e600g_v2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = E600G_V2_KEYS_DEBOUNCE_INTERVAL, - .gpio = E600G_V2_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct gpio_keys_button e600gac_v2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = E600G_V2_KEYS_DEBOUNCE_INTERVAL, - .gpio = E600G_V2_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = E600G_V2_KEYS_DEBOUNCE_INTERVAL, - .gpio = E600GAC_V2_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - -static void __init e600g_v2_common_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f050400); - u8 *art = (u8 *) KSEG1ADDR(0x1f061000); - - ath79_register_m25p80(NULL); - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_mdio(0, 0x0); - - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = 0xfe; - - /* LAN */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.speed = SPEED_100; - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_register_eth(0); - - /* WAN */ - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.phy_mask = BIT(0); - ath79_eth1_data.speed = SPEED_1000; - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - ath79_register_eth(1); - - ath79_register_pci(); - ath79_register_usb(); - ath79_register_wmac(art, NULL); -} - -static void __init e600g_v2_setup(void) -{ - e600g_v2_common_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(e600g_v2_leds_gpio), - e600g_v2_leds_gpio); - - ath79_register_gpio_keys_polled(-1, E600G_V2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(e600g_v2_gpio_keys), - e600g_v2_gpio_keys); -} - -static void __init e600gac_v2_setup(void) -{ - e600g_v2_common_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(e600gac_v2_leds_gpio), - e600gac_v2_leds_gpio); - - ath79_register_gpio_keys_polled(-1, E600G_V2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(e600gac_v2_gpio_keys), - e600gac_v2_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_E600G_V2, "E600G-V2", "Qxwlan E600G v2", - e600g_v2_setup); - -MIPS_MACHINE(ATH79_MACH_E600GAC_V2, "E600GAC-V2", "Qxwlan E600GAC v2", - e600gac_v2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-e750a-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-e750a-v4.c deleted file mode 100644 index 7cf3292c68..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-e750a-v4.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * Qxwlan E750A v4 board support - * - * Copyright (C) 2017 Peng Zhang <sd20@qxwlan.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define E750A_V4_GPIO_LED_SYS 14 -#define E750A_V4_GPIO_LED_LAN 19 -#define E750A_V4_GPIO_LED_WAN 18 -#define E750A_V4_GPIO_LED_DS10 15 -#define E750A_V4_GPIO_LED_DS20 20 -#define E750A_V4_GPIO_LED_WLAN 21 - -#define E750A_V4_GPIO_BTN_RESET 12 - -#define E750A_V4_KEYS_POLL_INTERVAL 20 /* msecs */ -#define E750A_V4_KEYS_DEBOUNCE_INTERVAL (3 * E750A_V4_KEYS_POLL_INTERVAL) - -static struct gpio_led e750a_v4_leds_gpio[] __initdata = { - { - .name = "e750a-v4:green:system", - .gpio = E750A_V4_GPIO_LED_SYS, - .active_low = 1, - }, - { - .name = "e750a-v4:green:lan", - .gpio = E750A_V4_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "e750a-v4:green:wan", - .gpio = E750A_V4_GPIO_LED_WAN, - .active_low = 1, - }, - { - .name = "e750a-v4:green:wlan", - .gpio = E750A_V4_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "e750a-v4:green:ds10", - .gpio = E750A_V4_GPIO_LED_DS10, - .active_low = 1, - }, - { - .name = "e750a-v4:green:ds20", - .gpio = E750A_V4_GPIO_LED_DS20, - .active_low = 1, - }, -}; - -static struct gpio_keys_button e750a_v4_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = E750A_V4_KEYS_DEBOUNCE_INTERVAL, - .gpio = E750A_V4_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - - -static void __init e750a_v4_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f050400); - u8 *art = (u8 *) KSEG1ADDR(0x1f061000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(e750a_v4_leds_gpio), - e750a_v4_leds_gpio); - ath79_register_gpio_keys_polled(-1, E750A_V4_KEYS_POLL_INTERVAL, - ARRAY_SIZE(e750a_v4_gpio_keys), - e750a_v4_gpio_keys); - - ath79_register_mdio(1, 0x0); - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); - - /* GMAC1 is connected to the internal switch */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - ath79_register_eth(1); - - /* GMAC0 is connected to the PHY4 of the internal switch */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(4); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_register_eth(0); - - ath79_register_pci(); - ath79_register_usb(); - ath79_register_wmac(art, NULL); -} - -MIPS_MACHINE(ATH79_MACH_E750A_V4, "E750A-V4", "Qxlan E750A v4", - e750a_v4_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-e750g-v8.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-e750g-v8.c deleted file mode 100644 index 9252d1d5ad..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-e750g-v8.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Qxwlan E750G v8 board support - * - * Copyright (C) 2017 Peng Zhang <sd20@qxwlan.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/phy.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-usb.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define E750G_V8_GPIO_LED_SYS 14 -#define E750G_V8_GPIO_LED_DS20 15 -#define E750G_V8_GPIO_LED_DS10 20 -#define E750G_V8_GPIO_LED_WLAN 21 - -#define E750G_V8_GPIO_BTN_RESET 12 - -#define E750G_V8_KEYS_POLL_INTERVAL 20 /* msecs */ -#define E750G_V8_KEYS_DEBOUNCE_INTERVAL (3 * E750G_V8_KEYS_POLL_INTERVAL) - -static struct gpio_led e750g_v8_leds_gpio[] __initdata = { - { - .name = "e750g-v8:green:system", - .gpio = E750G_V8_GPIO_LED_SYS, - .active_low = 1, - }, - { - .name = "e750g-v8:green:ds10", - .gpio = E750G_V8_GPIO_LED_DS10, - .active_low = 1, - }, - { - .name = "e750g-v8:green:ds20", - .gpio = E750G_V8_GPIO_LED_DS20, - .active_low = 1, - }, - { - .name = "e750g-v8:green:wlan", - .gpio = E750G_V8_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button e750g_v8_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = E750G_V8_KEYS_DEBOUNCE_INTERVAL, - .gpio = E750G_V8_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static const struct ar8327_led_info e750g_v8_leds_qca8334[] = { - AR8327_LED_INFO(PHY1_0, HW, "e750g-v8:green:lan"), - AR8327_LED_INFO(PHY2_0, HW, "e750g-v8:green:wan"), -}; - -static struct ar8327_pad_cfg e750g_v8_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, - .mac06_exchange_dis = true, -}; - -static struct ar8327_led_cfg e750g_v8_ar8327_led_cfg = { - .led_ctrl0 = 0x00000000, - .led_ctrl1 = 0xc737c737, - .led_ctrl2 = 0x00000000, - .led_ctrl3 = 0x00c30c00, - .open_drain = true, -}; - -static struct ar8327_platform_data e750g_v8_ar8327_data = { - .pad0_cfg = &e750g_v8_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &e750g_v8_ar8327_led_cfg, - .leds = e750g_v8_leds_qca8334, - .num_leds = ARRAY_SIZE(e750g_v8_leds_qca8334), -}; - -static struct mdio_board_info e750g_v8_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &e750g_v8_ar8327_data, - }, -}; - -static void __init e750g_v8_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f050400); - u8 *art = (u8 *) KSEG1ADDR(0x1f061000); - - ath79_register_m25p80(NULL); - ath79_register_leds_gpio(-1, ARRAY_SIZE(e750g_v8_leds_gpio), - e750g_v8_leds_gpio); - ath79_register_gpio_keys_polled(-1, E750G_V8_KEYS_POLL_INTERVAL, - ARRAY_SIZE(e750g_v8_gpio_keys), - e750g_v8_gpio_keys); - - mdiobus_register_board_info(e750g_v8_mdio0_info, - ARRAY_SIZE(e750g_v8_mdio0_info)); - - ath79_register_mdio(0, 0x0); - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | - AR934X_ETH_CFG_SW_ONLY_MODE); - - /* GMAC0 is connected to an AR8327 switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_register_eth(0); - - ath79_register_pci(); - ath79_register_usb(); - ath79_register_wmac(art, NULL); -} - -MIPS_MACHINE(ATH79_MACH_E750G_V8, "E750G-V8", "Qxwlan E750G v8", - e750g_v8_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-eap120.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-eap120.c deleted file mode 100644 index 130c7706a6..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-eap120.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * TP-LINK EAP120 board support - * - * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/platform_data/mdio-gpio.h> -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include <linux/platform_data/phy-at803x.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - - -#define EAP120_GPIO_LED_RED 12 -#define EAP120_GPIO_LED_YEL 13 -#define EAP120_GPIO_LED_GRN 15 -#define EAP120_GPIO_BTN_RESET 4 - -#define EAP120_KEYS_POLL_INTERVAL 20 /* msecs */ -#define EAP120_KEYS_DEBOUNCE_INTERVAL (3 * EAP120_KEYS_POLL_INTERVAL) - -#define EAP120_GPIO_SMI_MDIO 16 -#define EAP120_GPIO_SMI_MDC 17 - -#define EAP120_LAN_PHYADDR 4 - -static struct gpio_led eap120_leds_gpio[] __initdata = { - { - .name = "eap120:red:system", - .gpio = EAP120_GPIO_LED_RED, - .active_low = 1, - }, { - .name = "eap120:yellow:system", - .gpio = EAP120_GPIO_LED_YEL, - .active_low = 1, - }, { - .name = "eap120:green:system", - .gpio = EAP120_GPIO_LED_GRN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button eap120_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = EAP120_KEYS_DEBOUNCE_INTERVAL, - .gpio = EAP120_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct mdio_gpio_platform_data eap120_mdio = { - .mdc = EAP120_GPIO_SMI_MDC, - .mdio = EAP120_GPIO_SMI_MDIO, - .phy_mask = ~BIT(EAP120_LAN_PHYADDR), -}; - -static struct at803x_platform_data eap120_ar8035_data = { - .disable_smarteee = 0, - .enable_rgmii_rx_delay = 1, - .enable_rgmii_tx_delay = 0, - .fixup_rgmii_tx_delay = 1, -}; - -static struct platform_device eap120_phy_device = { - .name = "mdio-gpio", - .id = 0, - .dev = { - .platform_data = &eap120_mdio, &eap120_ar8035_data - }, -}; - -static void __init eap_setup(u8 *mac) -{ - ath79_register_leds_gpio(-1, ARRAY_SIZE(eap120_leds_gpio), - eap120_leds_gpio); - - ath79_register_gpio_keys_polled(1, EAP120_KEYS_POLL_INTERVAL, - ARRAY_SIZE(eap120_gpio_keys), - eap120_gpio_keys); - - ath79_register_m25p80(NULL); - - /* MDIO Interface */ - platform_device_register(&eap120_phy_device); - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); - - /* GMAC0 is connected to the RGMII interface to an Atheros AR8035-A */ - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.mii_bus_dev = &eap120_phy_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(EAP120_LAN_PHYADDR); - ath79_eth0_pll_data.pll_1000 = 0x0e000000; - ath79_eth0_pll_data.pll_100 = 0x00000101; - ath79_eth0_pll_data.pll_10 = 0x00001313; - ath79_register_eth(0); -} - -static void __init eap120_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f030008); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - eap_setup(mac); - - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_EAP120, "EAP120", "TP-LINK EAP120", - eap120_setup); - diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-eap300v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-eap300v2.c deleted file mode 100644 index ba577e2517..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-eap300v2.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * EnGenius EAP300 v2 board support - * - * Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define EAP300V2_GPIO_LED_POWER 0 -#define EAP300V2_GPIO_LED_LAN 16 -#define EAP300V2_GPIO_LED_WLAN 17 - -#define EAP300V2_GPIO_BTN_RESET 1 - -#define EAP300V2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define EAP300V2_KEYS_DEBOUNCE_INTERVAL (3 * EAP300V2_KEYS_POLL_INTERVAL) - -static struct gpio_led eap300v2_leds_gpio[] __initdata = { - { - .name = "engenius:blue:power", - .gpio = EAP300V2_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "engenius:blue:lan", - .gpio = EAP300V2_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "engenius:blue:wlan", - .gpio = EAP300V2_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button eap300v2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = EAP300V2_KEYS_DEBOUNCE_INTERVAL, - .gpio = EAP300V2_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -#define EAP300V2_ART_MAC_OFFSET 2 - -#define EAP300V2_LAN_PHYMASK BIT(0) - -static void __init eap300v2_setup(void) -{ - u8 *art = (u8 *)KSEG1ADDR(0x1fff1000); - - ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); - - ath79_gpio_output_select(EAP300V2_GPIO_LED_POWER, AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(EAP300V2_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(EAP300V2_GPIO_LED_WLAN, AR934X_GPIO_OUT_GPIO); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(eap300v2_leds_gpio), - eap300v2_leds_gpio); - ath79_register_gpio_keys_polled(-1, EAP300V2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(eap300v2_gpio_keys), - eap300v2_gpio_keys); - - ath79_register_m25p80(NULL); - ath79_register_wmac(art, NULL); - ath79_register_mdio(1, 0x0); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP); - - ath79_init_mac(ath79_eth0_data.mac_addr, - art + EAP300V2_ART_MAC_OFFSET, 0); - - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = EAP300V2_LAN_PHYMASK; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = EAP300V2_LAN_PHYMASK; - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_EAP300V2, "EAP300V2", "EnGenius EAP300 v2", - eap300v2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-eap7660d.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-eap7660d.c deleted file mode 100644 index 787e6275d6..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-eap7660d.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * Senao EAP7660D board support - * - * Copyright (C) 2010 Daniel Golle <daniel.golle@gmail.com> - * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/ath5k_platform.h> -#include <linux/delay.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" -#include "pci.h" - -#define EAP7660D_KEYS_POLL_INTERVAL 20 /* msecs */ -#define EAP7660D_KEYS_DEBOUNCE_INTERVAL (3 * EAP7660D_KEYS_POLL_INTERVAL) - -#define EAP7660D_GPIO_DS4 7 -#define EAP7660D_GPIO_DS5 2 -#define EAP7660D_GPIO_DS7 0 -#define EAP7660D_GPIO_DS8 4 -#define EAP7660D_GPIO_SW1 3 -#define EAP7660D_GPIO_SW3 8 -#define EAP7660D_PHYMASK BIT(20) -#define EAP7660D_BOARDCONFIG 0x1F7F0000 -#define EAP7660D_GBIC_MAC_OFFSET 0x1000 -#define EAP7660D_WMAC0_MAC_OFFSET 0x1010 -#define EAP7660D_WMAC1_MAC_OFFSET 0x1016 -#define EAP7660D_WMAC0_CALDATA_OFFSET 0x2000 -#define EAP7660D_WMAC1_CALDATA_OFFSET 0x3000 - -#ifdef CONFIG_PCI -static struct ath5k_platform_data eap7660d_wmac0_data; -static struct ath5k_platform_data eap7660d_wmac1_data; -static char eap7660d_wmac0_mac[6]; -static char eap7660d_wmac1_mac[6]; -static u16 eap7660d_wmac0_eeprom[ATH5K_PLAT_EEP_MAX_WORDS]; -static u16 eap7660d_wmac1_eeprom[ATH5K_PLAT_EEP_MAX_WORDS]; - -static int eap7660d_pci_plat_dev_init(struct pci_dev *dev) -{ - switch (PCI_SLOT(dev->devfn)) { - case 17: - dev->dev.platform_data = &eap7660d_wmac0_data; - break; - - case 18: - dev->dev.platform_data = &eap7660d_wmac1_data; - break; - } - - return 0; -} - -void __init eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0, - u8 *cal_data1, u8 *mac_addr1) -{ - if (cal_data0 && *cal_data0 == 0xa55a) { - memcpy(eap7660d_wmac0_eeprom, cal_data0, - ATH5K_PLAT_EEP_MAX_WORDS); - eap7660d_wmac0_data.eeprom_data = eap7660d_wmac0_eeprom; - } - - if (cal_data1 && *cal_data1 == 0xa55a) { - memcpy(eap7660d_wmac1_eeprom, cal_data1, - ATH5K_PLAT_EEP_MAX_WORDS); - eap7660d_wmac1_data.eeprom_data = eap7660d_wmac1_eeprom; - } - - if (mac_addr0) { - memcpy(eap7660d_wmac0_mac, mac_addr0, - sizeof(eap7660d_wmac0_mac)); - eap7660d_wmac0_data.macaddr = eap7660d_wmac0_mac; - } - - if (mac_addr1) { - memcpy(eap7660d_wmac1_mac, mac_addr1, - sizeof(eap7660d_wmac1_mac)); - eap7660d_wmac1_data.macaddr = eap7660d_wmac1_mac; - } - - ath79_pci_set_plat_dev_init(eap7660d_pci_plat_dev_init); - ath79_register_pci(); -} -#else -static inline void eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0, - u8 *cal_data1, u8 *mac_addr1) -{ -} -#endif /* CONFIG_PCI */ - -static struct gpio_led eap7660d_leds_gpio[] __initdata = { - { - .name = "eap7660d:green:ds8", - .gpio = EAP7660D_GPIO_DS8, - .active_low = 0, - }, - { - .name = "eap7660d:green:ds5", - .gpio = EAP7660D_GPIO_DS5, - .active_low = 0, - }, - { - .name = "eap7660d:green:ds7", - .gpio = EAP7660D_GPIO_DS7, - .active_low = 0, - }, - { - .name = "eap7660d:green:ds4", - .gpio = EAP7660D_GPIO_DS4, - .active_low = 0, - } -}; - -static struct gpio_keys_button eap7660d_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL, - .gpio = EAP7660D_GPIO_SW1, - .active_low = 1, - }, - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL, - .gpio = EAP7660D_GPIO_SW3, - .active_low = 1, - } -}; - -static const char *eap7660d_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data eap7660d_flash_data = { - .part_probes = eap7660d_part_probes, -}; - -static void __init eap7660d_setup(void) -{ - u8 *boardconfig = (u8 *) KSEG1ADDR(EAP7660D_BOARDCONFIG); - - ath79_register_mdio(0, ~EAP7660D_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, - boardconfig + EAP7660D_GBIC_MAC_OFFSET, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = EAP7660D_PHYMASK; - ath79_register_eth(0); - ath79_register_m25p80(&eap7660d_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(eap7660d_leds_gpio), - eap7660d_leds_gpio); - ath79_register_gpio_keys_polled(-1, EAP7660D_KEYS_POLL_INTERVAL, - ARRAY_SIZE(eap7660d_gpio_keys), - eap7660d_gpio_keys); - eap7660d_pci_init(boardconfig + EAP7660D_WMAC0_CALDATA_OFFSET, - boardconfig + EAP7660D_WMAC0_MAC_OFFSET, - boardconfig + EAP7660D_WMAC1_CALDATA_OFFSET, - boardconfig + EAP7660D_WMAC1_MAC_OFFSET); -}; - -MIPS_MACHINE(ATH79_MACH_EAP7660D, "EAP7660D", "Senao EAP7660D", - eap7660d_setup); - -MIPS_MACHINE(ATH79_MACH_ALL0305, "ALL0305", "Allnet ALL0305", - eap7660d_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-el-m150.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-el-m150.c deleted file mode 100644 index b95d6c2f68..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-el-m150.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * Easy-Link EL-M150 board support - * - * Copyright (C) 2012 huangfc <huangfangcheng@163.com> - * Copyright (C) 2012 HYS <550663898@qq.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "dev-usb.h" - -#define EL_M150_GPIO_BTN6 6 -#define EL_M150_GPIO_BTN7 7 -#define EL_M150_GPIO_BTN_RESET 11 - -#define EL_M150_GPIO_LED_SYSTEM 27 -#define EL_M150_GPIO_USB_POWER 8 - -#define EL_M150_KEYS_POLL_INTERVAL 20 /* msecs */ -#define EL_M150_KEYS_DEBOUNCE_INTERVAL (3 * EL_M150_KEYS_POLL_INTERVAL) - -static const char *EL_M150_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data EL_M150_flash_data = { - .part_probes = EL_M150_part_probes, -}; - -static struct gpio_led EL_M150_leds_gpio[] __initdata = { - { - .name = "easylink:green:system", - .gpio = EL_M150_GPIO_LED_SYSTEM, - .active_low = 1, - }, -}; - -static struct gpio_keys_button EL_M150_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = EL_M150_KEYS_DEBOUNCE_INTERVAL, - .gpio = EL_M150_GPIO_BTN_RESET, - .active_low = 0, - }, - { - .desc = "BTN_6", - .type = EV_KEY, - .code = BTN_6, - .debounce_interval = EL_M150_KEYS_DEBOUNCE_INTERVAL, - .gpio = EL_M150_GPIO_BTN6, - .active_low = 1, - }, - { - .desc = "BTN_7", - .type = EV_KEY, - .code = BTN_7, - .debounce_interval = EL_M150_KEYS_DEBOUNCE_INTERVAL, - .gpio = EL_M150_GPIO_BTN7, - .active_low = 1, - }, -}; - -static void __init el_m150_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(EL_M150_leds_gpio), - EL_M150_leds_gpio); - - ath79_register_gpio_keys_polled(-1, EL_M150_KEYS_POLL_INTERVAL, - ARRAY_SIZE(EL_M150_gpio_keys), - EL_M150_gpio_keys); - - gpio_request_one(EL_M150_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); - - ath79_register_m25p80(&EL_M150_flash_data); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_EL_M150, "EL-M150", - "EasyLink EL-M150", el_m150_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-el-mini.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-el-mini.c deleted file mode 100644 index 9879b18f7c..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-el-mini.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Easy-Link EL-MINI board support - * - * Copyright (C) 2012 huangfc <huangfangcheng@163.com> - * Copyright (C) 2011 hys <550663898@qq.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define MINI_GPIO_LED_SYSTEM 27 -#define MINI_GPIO_BTN_RESET 11 - -#define MINI_GPIO_USB_POWER 8 - -#define MINI_KEYS_POLL_INTERVAL 20 /* msecs */ -#define MINI_KEYS_DEBOUNCE_INTERVAL (3 * MINI_KEYS_POLL_INTERVAL) - -static const char *mini_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data mini_flash_data = { - .part_probes = mini_part_probes, -}; - -static struct gpio_led mini_leds_gpio[] __initdata = { - { - .name = "easylink:green:system", - .gpio = MINI_GPIO_LED_SYSTEM, - .active_low = 1, - }, -}; - -static struct gpio_keys_button mini_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = MINI_KEYS_DEBOUNCE_INTERVAL, - .gpio = MINI_GPIO_BTN_RESET, - .active_low = 0, - } -}; - -static void __init el_mini_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(&mini_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(mini_leds_gpio), - mini_leds_gpio); - ath79_register_gpio_keys_polled(-1, MINI_KEYS_POLL_INTERVAL, - ARRAY_SIZE(mini_gpio_keys), - mini_gpio_keys); - - gpio_request_one(MINI_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_EL_MINI, "EL-MINI", "EasyLink EL-MINI", - el_mini_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ens202ext.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ens202ext.c deleted file mode 100644 index 07dbc2e69d..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ens202ext.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * EnGenius ENS202EXT board support - * - * Copyright (C) 2017 Marty Plummer <netz.kernel@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "nvram.h" - -#define ENS202_GPIO_LED_WLAN4 0 -#define ENS202_GPIO_LED_POWER 14 -#define ENS202_GPIO_LED_WLAN2 16 -#define ENS202_GPIO_LED_WLAN3 17 -#define ENS202_GPIO_LED_WLAN1 18 - -#define ENS202_GPIO_BTN_RESET 1 - -#define ENS202_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ENS202_KEYS_DEBOUNCE_INTERVAL (3 * ENS202_KEYS_POLL_INTERVAL) - -static struct gpio_led ens202_leds_gpio[] __initdata = { - { - .name = "engenius:amber:wlan1", - .gpio = ENS202_GPIO_LED_WLAN1, - .active_low = 1, - }, { - .name = "engenius:red:wlan2", - .gpio = ENS202_GPIO_LED_WLAN2, - .active_low = 1, - }, { - .name = "engenius:amber:wlan3", - .gpio = ENS202_GPIO_LED_WLAN3, - .active_low = 1, - }, { - .name = "engenius:green:wlan4", - .gpio = ENS202_GPIO_LED_WLAN4, - .active_low = 1, - }, { - .name = "engenius:amber:power", - .gpio = ENS202_GPIO_LED_POWER, - .active_low = 1, - } -}; - -static struct gpio_keys_button ens202_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ENS202_KEYS_DEBOUNCE_INTERVAL, - .gpio = ENS202_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init ens202_setup(void) -{ - const char *nvram = (char *) KSEG1ADDR(0x1f040000); - u8 mac_buff[6]; - u8 *mac = NULL; - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - if (ath79_nvram_parse_mac_addr(nvram, 0x10000, - "ethaddr=", mac_buff) == 0) { - ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1); - mac = mac_buff; - } - - ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); - - ath79_gpio_output_select(ENS202_GPIO_LED_POWER, AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(ENS202_GPIO_LED_WLAN1, AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(ENS202_GPIO_LED_WLAN2, AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(ENS202_GPIO_LED_WLAN3, AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(ENS202_GPIO_LED_WLAN4, AR934X_GPIO_OUT_GPIO); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ens202_leds_gpio), - ens202_leds_gpio); - ath79_register_gpio_keys_polled(-1, ENS202_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ens202_gpio_keys), - ens202_gpio_keys); - - ath79_register_m25p80(NULL); - - ath79_register_wmac(art + 0x1000, NULL); - - ath79_register_mdio(1, 0); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | - AR934X_ETH_CFG_SW_ONLY_MODE); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - ath79_register_eth(1); -} - -MIPS_MACHINE(ATH79_MACH_ENS202EXT, "ENS202EXT", "EnGenius ENS202EXT", - ens202_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-epg5000.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-epg5000.c deleted file mode 100644 index 89d6ec6fe3..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-epg5000.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * EnGenius EPG5000 board support - * - * Copyright (c) 2014 Jon Suphammer <jon@suphammer.net> - * Copyright (c) 2015 Christian Beier <cb@shoutrlabs.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "nvram.h" - -#define EPG5000_GPIO_LED_WLAN_5G 23 -#define EPG5000_GPIO_LED_WLAN_2G 13 -#define EPG5000_GPIO_LED_POWER_AMBER 2 -#define EPG5000_GPIO_LED_WPS_AMBER 22 -#define EPG5000_GPIO_LED_WPS_BLUE 19 - -#define EPG5000_GPIO_BTN_WPS 16 -#define EPG5000_GPIO_BTN_RESET 17 - -#define EPG5000_KEYS_POLL_INTERVAL 20 /* msecs */ -#define EPG5000_KEYS_DEBOUNCE_INTERVAL (3 * EPG5000_KEYS_POLL_INTERVAL) - -#define EPG5000_CALDATA_ADDR 0x1fff0000 -#define EPG5000_WMAC_CALDATA_OFFSET 0x1000 -#define EPG5000_PCIE_CALDATA_OFFSET 0x5000 - -#define EPG5000_NVRAM_ADDR 0x1f030000 -#define EPG5000_NVRAM_SIZE 0x10000 - -static struct gpio_led epg5000_leds_gpio[] __initdata = { - { - .name = "epg5000:amber:power", - .gpio = EPG5000_GPIO_LED_POWER_AMBER, - .active_low = 1, - }, - { - .name = "epg5000:blue:wps", - .gpio = EPG5000_GPIO_LED_WPS_BLUE, - .active_low = 1, - }, - { - .name = "epg5000:amber:wps", - .gpio = EPG5000_GPIO_LED_WPS_AMBER, - .active_low = 1, - }, - { - .name = "epg5000:blue:wlan-2g", - .gpio = EPG5000_GPIO_LED_WLAN_2G, - .active_low = 1, - }, - { - .name = "epg5000:blue:wlan-5g", - .gpio = EPG5000_GPIO_LED_WLAN_5G, - .active_low = 1, - } -}; - -static struct gpio_keys_button epg5000_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = EPG5000_KEYS_DEBOUNCE_INTERVAL, - .gpio = EPG5000_GPIO_BTN_WPS, - .active_low = 1, - }, - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = EPG5000_KEYS_DEBOUNCE_INTERVAL, - .gpio = EPG5000_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg epg5000_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL2, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_platform_data epg5000_ar8327_data = { - .pad0_cfg = &epg5000_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info epg5000_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &epg5000_ar8327_data, - }, -}; - -static int epg5000_get_mac(const char *name, char *mac) -{ - u8 *nvram = (u8 *) KSEG1ADDR(EPG5000_NVRAM_ADDR); - int err; - - err = ath79_nvram_parse_mac_addr(nvram, EPG5000_NVRAM_SIZE, - name, mac); - if (err) { - pr_err("no MAC address found for %s\n", name); - return false; - } - - return true; -} - -static void __init epg5000_setup(void) -{ - u8 *caldata = (u8 *) KSEG1ADDR(EPG5000_CALDATA_ADDR); - u8 mac1[ETH_ALEN]; - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(epg5000_leds_gpio), - epg5000_leds_gpio); - ath79_register_gpio_keys_polled(-1, EPG5000_KEYS_POLL_INTERVAL, - ARRAY_SIZE(epg5000_gpio_keys), - epg5000_gpio_keys); - - ath79_register_usb(); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(epg5000_mdio0_info, - ARRAY_SIZE(epg5000_mdio0_info)); - - /* GMAC0 is connected to an QCA8327N switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - - if (epg5000_get_mac("ethaddr=", mac1)) - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); - - ath79_eth0_pll_data.pll_1000 = 0xa6000000; - ath79_register_eth(0); - - ath79_register_wmac(caldata + EPG5000_WMAC_CALDATA_OFFSET, mac1); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_EPG5000, "EPG5000", - "EnGenius EPG5000", - epg5000_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-esr1750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-esr1750.c deleted file mode 100644 index c275ef6f1b..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-esr1750.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * EnGenius ESR1750 board support - * - * Copyright (c) 2014 Jon Suphammer <jon@suphammer.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "nvram.h" - -#define ESR1750_GPIO_LED_WLAN_5G 23 -#define ESR1750_GPIO_LED_WLAN_2G 13 -#define ESR1750_GPIO_LED_POWER_AMBER 2 -#define ESR1750_GPIO_LED_WPS_AMBER 22 -#define ESR1750_GPIO_LED_WPS_BLUE 19 - -#define ESR1750_GPIO_BTN_WPS 16 -#define ESR1750_GPIO_BTN_RESET 17 - -#define ESR1750_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ESR1750_KEYS_DEBOUNCE_INTERVAL (3 * ESR1750_KEYS_POLL_INTERVAL) - -#define ESR1750_CALDATA_ADDR 0x1fff0000 -#define ESR1750_WMAC_CALDATA_OFFSET 0x1000 -#define ESR1750_PCIE_CALDATA_OFFSET 0x5000 - -#define ESR1750_NVRAM_ADDR 0x1f030000 -#define ESR1750_NVRAM_SIZE 0x10000 - -static struct gpio_led esr1750_leds_gpio[] __initdata = { - { - .name = "esr1750:amber:power", - .gpio = ESR1750_GPIO_LED_POWER_AMBER, - .active_low = 1, - }, - { - .name = "esr1750:blue:wps", - .gpio = ESR1750_GPIO_LED_WPS_BLUE, - .active_low = 1, - }, - { - .name = "esr1750:amber:wps", - .gpio = ESR1750_GPIO_LED_WPS_AMBER, - .active_low = 1, - }, - { - .name = "esr1750:blue:wlan-2g", - .gpio = ESR1750_GPIO_LED_WLAN_2G, - .active_low = 1, - }, - { - .name = "esr1750:blue:wlan-5g", - .gpio = ESR1750_GPIO_LED_WLAN_5G, - .active_low = 1, - } -}; - -static struct gpio_keys_button esr1750_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = ESR1750_KEYS_DEBOUNCE_INTERVAL, - .gpio = ESR1750_GPIO_BTN_WPS, - .active_low = 1, - }, - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ESR1750_KEYS_DEBOUNCE_INTERVAL, - .gpio = ESR1750_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg esr1750_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL2, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_platform_data esr1750_ar8327_data = { - .pad0_cfg = &esr1750_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info esr1750_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &esr1750_ar8327_data, - }, -}; - -static int esr1750_get_mac(const char *name, char *mac) -{ - u8 *nvram = (u8 *) KSEG1ADDR(ESR1750_NVRAM_ADDR); - int err; - - err = ath79_nvram_parse_mac_addr(nvram, ESR1750_NVRAM_SIZE, - name, mac); - if (err) { - pr_err("no MAC address found for %s\n", name); - return false; - } - - return true; -} - -static void __init esr1750_setup(void) -{ - u8 *caldata = (u8 *) KSEG1ADDR(ESR1750_CALDATA_ADDR); - u8 mac1[ETH_ALEN]; - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(esr1750_leds_gpio), - esr1750_leds_gpio); - ath79_register_gpio_keys_polled(-1, ESR1750_KEYS_POLL_INTERVAL, - ARRAY_SIZE(esr1750_gpio_keys), - esr1750_gpio_keys); - - ath79_register_usb(); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(esr1750_mdio0_info, - ARRAY_SIZE(esr1750_mdio0_info)); - - /* GMAC0 is connected to an QCA8327N switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - - if (esr1750_get_mac("ethaddr=", mac1)) - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); - - ath79_eth0_pll_data.pll_1000 = 0xa6000000; - ath79_register_eth(0); - - ath79_register_wmac(caldata + ESR1750_WMAC_CALDATA_OFFSET, mac1); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_ESR1750, "ESR1750", - "EnGenius ESR1750", - esr1750_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-esr900.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-esr900.c deleted file mode 100644 index cf2ee9295a..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-esr900.c +++ /dev/null @@ -1,200 +0,0 @@ -/* - * EnGenius ESR900 board support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#define pr_fmt(fmt) "esr900: " fmt - -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "nvram.h" - -#define ESR900_GPIO_LED_POWER 2 -#define ESR900_GPIO_LED_WLAN_2G 13 -#define ESR900_GPIO_LED_WPS_BLUE 19 -#define ESR900_GPIO_LED_WPS_AMBER 22 -#define ESR900_GPIO_LED_WLAN_5G 23 - -#define ESR900_GPIO_BTN_WPS 16 -#define ESR900_GPIO_BTN_RESET 17 - -#define ESR900_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ESR900_KEYS_DEBOUNCE_INTERVAL (3 * ESR900_KEYS_POLL_INTERVAL) - -#define ESR900_CALDATA_ADDR 0x1fff0000 -#define ESR900_WMAC_CALDATA_OFFSET 0x1000 -#define ESR900_PCIE_CALDATA_OFFSET 0x5000 - -#define ESR900_CONFIG_ADDR 0x1f030000 -#define ESR900_CONFIG_SIZE 0x10000 - -#define ESR900_LAN_PHYMASK BIT(0) -#define ESR900_WAN_PHYMASK BIT(5) -#define ESR900_MDIO_MASK (~(ESR900_LAN_PHYMASK | ESR900_WAN_PHYMASK)) - -static struct gpio_led esr900_leds_gpio[] __initdata = { - { - .name = "engenius:amber:power", - .gpio = ESR900_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "engenius:blue:wlan-2g", - .gpio = ESR900_GPIO_LED_WLAN_2G, - .active_low = 1, - }, - { - .name = "engenius:blue:wps", - .gpio = ESR900_GPIO_LED_WPS_BLUE, - .active_low = 1, - }, - { - .name = "engenius:amber:wps", - .gpio = ESR900_GPIO_LED_WPS_AMBER, - .active_low = 1, - }, - { - .name = "engenius:blue:wlan-5g", - .gpio = ESR900_GPIO_LED_WLAN_5G, - .active_low = 1, - } -}; - -static struct gpio_keys_button esr900_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = ESR900_KEYS_DEBOUNCE_INTERVAL, - .gpio = ESR900_GPIO_BTN_WPS, - .active_low = 1, - }, - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ESR900_KEYS_DEBOUNCE_INTERVAL, - .gpio = ESR900_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg esr900_ar8327_pad0_cfg = { - /* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */ - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_pad_cfg esr900_ar8327_pad6_cfg = { - /* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */ - .mode = AR8327_PAD_MAC_SGMII, - .rxclk_delay_en = true, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0, -}; - -static struct ar8327_platform_data esr900_ar8327_data = { - .pad0_cfg = &esr900_ar8327_pad0_cfg, - .pad6_cfg = &esr900_ar8327_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .port6_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info esr900_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &esr900_ar8327_data, - }, -}; - -static void __init esr900_setup(void) -{ - const char *config = (char *) KSEG1ADDR(ESR900_CONFIG_ADDR); - u8 *art = (u8 *) KSEG1ADDR(ESR900_CALDATA_ADDR); - u8 lan_mac[ETH_ALEN]; - u8 wlan0_mac[ETH_ALEN]; - u8 wlan1_mac[ETH_ALEN]; - - if (ath79_nvram_parse_mac_addr(config, ESR900_CONFIG_SIZE, - "ethaddr=", lan_mac) == 0) { - ath79_init_local_mac(ath79_eth0_data.mac_addr, lan_mac); - ath79_init_mac(wlan0_mac, lan_mac, 0); - ath79_init_mac(wlan1_mac, lan_mac, 1); - } else { - pr_err("could not find ethaddr in u-boot environment\n"); - } - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(esr900_leds_gpio), - esr900_leds_gpio); - ath79_register_gpio_keys_polled(-1, ESR900_KEYS_POLL_INTERVAL, - ARRAY_SIZE(esr900_gpio_keys), - esr900_gpio_keys); - - ath79_register_usb(); - - ath79_register_wmac(art + ESR900_WMAC_CALDATA_OFFSET, wlan0_mac); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(esr900_mdio0_info, - ARRAY_SIZE(esr900_mdio0_info)); - - /* GMAC0 is connected to the RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = ESR900_LAN_PHYMASK; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - - ath79_eth0_pll_data.pll_1000 = 0xa6000000; - ath79_register_eth(0); - - /* GMAC1 is connected to the SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_eth1_pll_data.pll_1000 = 0x03000101; - ath79_register_eth(1); - - ap91_pci_init(art + ESR900_PCIE_CALDATA_OFFSET, wlan1_mac); -} - -MIPS_MACHINE(ATH79_MACH_ESR900, "ESR900", "EnGenius ESR900", esr900_setup); - diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c deleted file mode 100644 index 2e82ffdaa1..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * EW Balin board support - * (based on Atheros DB120 reference board support) - * - * Copyright (c) 2011 Qualcomm Atheros - * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2017 Embedded Wireless GmbH www.80211.de - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define BALIN_GPIO_LED_STATUS 14 - -#define BALIN_GPIO_BTN_WPS 18 - -#define BALIN_KEYS_POLL_INTERVAL 20 /* msecs */ -#define BALIN_KEYS_DEBOUNCE_INTERVAL (3 * BALIN_KEYS_POLL_INTERVAL) - -#define BALIN_CALDATA_OFFSET 0x1000 -#define BALIN_WMAC_MAC_OFFSET (BALIN_CALDATA_OFFSET + 0x02) - -static struct gpio_led balin_leds_gpio[] __initdata = { - { - .name = "balin:green:status", - .gpio = BALIN_GPIO_LED_STATUS, - .active_low = 1, - }, -}; - -static struct gpio_keys_button balin_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = BALIN_KEYS_DEBOUNCE_INTERVAL, - .gpio = BALIN_GPIO_BTN_WPS, - .active_low = 0, - }, -}; - - -static void __init balin_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - static u8 mac[6]; - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(balin_leds_gpio), - balin_leds_gpio); - - ath79_register_gpio_keys_polled(-1, BALIN_KEYS_POLL_INTERVAL, - ARRAY_SIZE(balin_gpio_keys), - balin_gpio_keys); - - ath79_register_usb(); - - ath79_register_wmac(art + BALIN_CALDATA_OFFSET, NULL); - - ath79_register_pci(); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | - AR934X_ETH_CFG_SW_ONLY_MODE); - - ath79_register_mdio(1, 0x0); - - /* GMAC1 is connected to the internal switch */ - memcpy(mac, art + BALIN_WMAC_MAC_OFFSET, sizeof(mac)); - mac[3] |= 0x40; - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(1); -} - -MIPS_MACHINE(ATH79_MACH_EW_BALIN, "EW-BALIN", "EmbWir-Balin", - balin_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-dorin.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-dorin.c deleted file mode 100644 index 5544596f91..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-dorin.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * EW Dorin board support - * (based on Atheros Ref. Design AP121) - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2012-2017 Embedded Wireless GmbH www.80211.de - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define DORIN_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DORIN_KEYS_DEBOUNCE_INTERVAL (3 * DORIN_KEYS_POLL_INTERVAL) - -#define DORIN_CALDATA_OFFSET 0x1000 -#define DORIN_WMAC_MAC_OFFSET 0x1002 - -#define DORIN_GPIO_LED_STATUS 21 - -#define DORIN_GPIO_BTN_JUMPSTART 11 -#define DORIN_GPIO_BTN_RESET 6 - -static struct gpio_led dorin_leds_gpio[] __initdata = { - { - .name = "dorin:green:status", - .gpio = DORIN_GPIO_LED_STATUS, - .active_low = 1, - }, -}; - -static struct gpio_keys_button dorin_gpio_keys[] __initdata = { - { - .desc = "jumpstart button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DORIN_KEYS_DEBOUNCE_INTERVAL, - .gpio = DORIN_GPIO_BTN_JUMPSTART, - .active_low = 0, - }, - { - .desc = "reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DORIN_KEYS_DEBOUNCE_INTERVAL, - .gpio = DORIN_GPIO_BTN_RESET, - .active_low = 0, - } -}; - -static void __init ew_dorin_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - static u8 mac[6]; - - ath79_register_m25p80(NULL); - - ath79_register_usb(); - - if (ar93xx_wmac_read_mac_address(mac)) { - ath79_register_wmac(NULL, NULL); - } else { - ath79_register_wmac(art + DORIN_CALDATA_OFFSET, - art + DORIN_WMAC_MAC_OFFSET); - memcpy(mac, art + DORIN_WMAC_MAC_OFFSET, sizeof(mac)); - } - - mac[3] |= 0x40; - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - - ath79_register_mdio(0, 0x0); - - /* LAN ports */ - ath79_register_eth(1); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dorin_leds_gpio), - dorin_leds_gpio); - ath79_register_gpio_keys_polled(-1, DORIN_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dorin_gpio_keys), - dorin_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_EW_DORIN, "EW-DORIN", "EmbWir-Dorin", - ew_dorin_setup); - - -static void __init ew_dorin_router_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - static u8 mac[6]; - - ath79_register_m25p80(NULL); - - ath79_register_usb(); - - if (ar93xx_wmac_read_mac_address(mac)) { - ath79_register_wmac(NULL, NULL); - } else { - ath79_register_wmac(art + DORIN_CALDATA_OFFSET, - art + DORIN_WMAC_MAC_OFFSET); - memcpy(mac, art + DORIN_WMAC_MAC_OFFSET, sizeof(mac)); - } - - mac[3] |= 0x40; - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - - mac[3] &= 0x3F; - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_setup_ar933x_phy4_switch(true, true); - - ath79_register_mdio(0, 0x0); - - /* LAN ports */ - ath79_register_eth(1); - - /* WAN port */ - ath79_register_eth(0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(dorin_leds_gpio), - dorin_leds_gpio); - ath79_register_gpio_keys_polled(-1, DORIN_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dorin_gpio_keys), - dorin_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_EW_DORIN_ROUTER, "EW-DORIN-ROUTER", - "EmbWir-Dorin-Router", ew_dorin_router_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-f9k1115v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-f9k1115v2.c deleted file mode 100644 index 232105e068..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-f9k1115v2.c +++ /dev/null @@ -1,189 +0,0 @@ -/* - * Belkin AC1750DB (F9K1115V2) board support - * - * Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define F9K1115V2_GPIO_LED_USB2 4 -#define F9K1115V2_GPIO_LED_WPS_AMBER 14 -#define F9K1115V2_GPIO_LED_STATUS_AMBER 15 -#define F9K1115V2_GPIO_LED_WPS_BLUE 19 -#define F9K1115V2_GPIO_LED_STATUS_BLUE 20 - -#define F9K1115V2_GPIO_BTN_WPS 16 -#define F9K1115V2_GPIO_BTN_RESET 17 - -#define F9K1115V2_GPIO_USB2_POWER 21 - -#define F9K1115V2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define F9K1115V2_KEYS_DEBOUNCE_INTERVAL (3 * F9K1115V2_KEYS_POLL_INTERVAL) - -#define F9K1115V2_WAN_MAC_OFFSET 0 -#define F9K1115V2_LAN_MAC_OFFSET 6 -#define F9K1115V2_WMAC_CALDATA_OFFSET 0x1000 -#define F9K1115V2_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led f9k1115v2_leds_gpio[] __initdata = { - { - .name = "belkin:amber:status", - .gpio = F9K1115V2_GPIO_LED_STATUS_AMBER, - .active_low = 1, - }, - { - .name = "belkin:blue:status", - .gpio = F9K1115V2_GPIO_LED_STATUS_BLUE, - .active_low = 1, - }, - { - .name = "belkin:blue:wps", - .gpio = F9K1115V2_GPIO_LED_WPS_BLUE, - .active_low = 1, - }, - { - .name = "belkin:amber:wps", - .gpio = F9K1115V2_GPIO_LED_WPS_AMBER, - .active_low = 1, - }, - { - .name = "belkin:green:usb2", - .gpio = F9K1115V2_GPIO_LED_USB2, - .active_low = 1, - }, -}; - -static struct gpio_keys_button f9k1115v2_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = F9K1115V2_KEYS_DEBOUNCE_INTERVAL, - .gpio = F9K1115V2_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = F9K1115V2_KEYS_DEBOUNCE_INTERVAL, - .gpio = F9K1115V2_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg f9k1115v2_ar8327_pad0_cfg = { - /* Use the RGMII interface for the GMAC0 of the AR8337 switch */ - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_pad_cfg f9k1115v2_ar8327_pad6_cfg = { - /* Use the SGMII interface for the GMAC6 of the AR8337 switch */ - .mode = AR8327_PAD_MAC_SGMII, - .rxclk_delay_en = true, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0, -}; - -static struct ar8327_platform_data f9k1115v2_ar8327_data = { - .pad0_cfg = &f9k1115v2_ar8327_pad0_cfg, - .pad6_cfg = &f9k1115v2_ar8327_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .port6_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info f9k1115v2_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &f9k1115v2_ar8327_data, - }, -}; - -static void __init f9k1115v2_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(f9k1115v2_leds_gpio), - f9k1115v2_leds_gpio); - ath79_register_gpio_keys_polled(-1, F9K1115V2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(f9k1115v2_gpio_keys), - f9k1115v2_gpio_keys); - - ath79_register_wmac(art + F9K1115V2_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_mdio(0, 0x0); - mdiobus_register_board_info(f9k1115v2_mdio0_info, - ARRAY_SIZE(f9k1115v2_mdio0_info)); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - ath79_init_mac(ath79_eth0_data.mac_addr, - art + F9K1115V2_WAN_MAC_OFFSET, 0); - - ath79_init_mac(ath79_eth1_data.mac_addr, - art + F9K1115V2_LAN_MAC_OFFSET, 0); - - ath79_eth0_pll_data.pll_1000 = 0xa6000000; - ath79_eth1_pll_data.pll_1000 = 0x03000101; - - /* GMAC0 is connected to the RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - - ath79_register_eth(0); - - /* GMAC1 is connected to the SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(1); - - ath79_register_pci(); - - ath79_register_usb(); - gpio_request_one(F9K1115V2_GPIO_USB2_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB2 power"); -} - -MIPS_MACHINE(ATH79_MACH_F9K1115V2, "F9K1115V2", "Belkin AC1750DB", - f9k1115v2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c deleted file mode 100644 index 43af71a0a8..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * AVM FRITZ!WLAN Repeater 300E board support - * - * Copyright (C) 2017 Mathias Kresin <dev@kresin.me> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -#define FRITZ300E_KEYS_POLL_INTERVAL 20 /* msecs */ -#define FRITZ300E_KEYS_DEBOUNCE_INTERVAL (3 * FRITZ300E_KEYS_POLL_INTERVAL) - -static struct mtd_partition fritz300e_flash_partitions[] = { - { - .name = "urloader", - .offset = 0, - .size = 0x0020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x0020000, - .size = 0x0ee0000, - }, { - .name = "tffs (1)", - .offset = 0x0f00000, - .size = 0x0080000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "tffs (2)", - .offset = 0x0f80000, - .size = 0x0080000, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct flash_platform_data fritz300e_flash_data = { - .parts = fritz300e_flash_partitions, - .nr_parts = ARRAY_SIZE(fritz300e_flash_partitions), -}; - -static struct gpio_led fritz300e_leds_gpio[] __initdata = { - { - .name = "fritz300e:green:power", - .gpio = 13, - .active_low = 1, - }, { - .name = "fritz300e:green:lan", - .gpio = 15, - .active_low = 1, - }, { - .name = "fritz300e:green:wlan", - .gpio = 16, - .active_low = 1, - } -}; - -static struct gpio_led fritz300e_wmac_leds_gpio[] = { - { - .name = "fritz300e:green:rssi0", - .gpio = 10, - .active_low = 1, - }, { - .name = "fritz300e:green:rssi1", - .gpio = 4, - .active_low = 1, - }, { - .name = "fritz300e:green:rssi2", - .gpio = 6, - .active_low = 1, - }, { - .name = "fritz300e:green:rssi3", - .gpio = 7, - .active_low = 1, - }, { - .name = "fritz300e:green:rssi4", - .gpio = 5, - .active_low = 1, - } -}; - -static struct gpio_keys_button fritz300e_gpio_keys[] __initdata = { - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = FRITZ300E_KEYS_DEBOUNCE_INTERVAL, - .gpio = 12, - .active_low = 1, - }, -}; - -static void __init fritz300e_setup(void) -{ - /* get the Lantiq PEF7071V phy out of reset */ - gpio_request_one(11, GPIOF_OUT_INIT_HIGH, "phy reset"); - - ath79_register_m25p80(&fritz300e_flash_data); - - ath79_register_mdio(0, ~(BIT(0))); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - - ath79_register_eth(0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(fritz300e_leds_gpio), - fritz300e_leds_gpio); - ath79_register_gpio_keys_polled(-1, FRITZ300E_KEYS_POLL_INTERVAL, - ARRAY_SIZE(fritz300e_gpio_keys), - fritz300e_gpio_keys); - - ap9x_pci_setup_wmac_leds(0, fritz300e_wmac_leds_gpio, - ARRAY_SIZE(fritz300e_wmac_leds_gpio)); - ap91_pci_init_simple(); -} - -MIPS_MACHINE(ATH79_MACH_FRITZ300E, "FRITZ300E", - "AVM FRITZ!WLAN Repeater 300E", fritz300e_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz4020.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz4020.c deleted file mode 100644 index c00cf681b2..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz4020.c +++ /dev/null @@ -1,242 +0,0 @@ -/* - * AVM FRITZ!Box 4020 board support - * - * Copyright (C) 2018 David Bauer <mail@david-bauer.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/ath9k_platform.h> -#include <linux/etherdevice.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_data/mdio-gpio.h> -#include <linux/spi/spi_gpio.h> -#include <linux/spi/74x164.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - - -#define FRITZ4020_GPIO_SHIFT_SER 19 /* DS, Data Serial Input */ -#define FRITZ4020_GPIO_SHIFT_SRCLK 20 /* SHCP, Shift Reg Clock Input */ - -#define FRITZ4020_SSR_BIT_0 0 -#define FRITZ4020_SSR_BIT_1 1 -#define FRITZ4020_SSR_BIT_2 2 -#define FRITZ4020_SSR_BIT_3 3 -#define FRITZ4020_SSR_BIT_4 4 -#define FRITZ4020_SSR_BIT_5 5 -#define FRITZ4020_SSR_BIT_6 6 -#define FRITZ4020_SSR_BIT_7 7 - -#define FRITZ4020_74HC_GPIO_BASE 32 -#define FRITZ4020_74HC_GPIO_LED_LAN (FRITZ4020_74HC_GPIO_BASE + 0) -#define FRITZ4020_74HC_GPIO_LED_INFO_RED (FRITZ4020_74HC_GPIO_BASE + 1) -#define FRITZ4020_74HC_GPIO_LED_POWER (FRITZ4020_74HC_GPIO_BASE + 2) -#define FRITZ4020_74HC_GPIO_LED_WLAN (FRITZ4020_74HC_GPIO_BASE + 3) -#define FRITZ4020_74HC_GPIO_LED_WAN (FRITZ4020_74HC_GPIO_BASE + 4) -#define FRITZ4020_74HC_GPIO_USB_RST (FRITZ4020_74HC_GPIO_BASE + 5) -#define FRITZ4020_74HC_GPIO_LED_INFO (FRITZ4020_74HC_GPIO_BASE + 6) - - -#define FRITZ4020_GPIO_BTN_WPS 2 -#define FRITZ4020_GPIO_BTN_WLAN 21 -#define FRITZ4020_KEYS_POLL_INTERVAL 20 /* msecs */ -#define FRITZ4020_KEYS_DEBOUNCE_INTERVAL (3 * FRITZ4020_KEYS_POLL_INTERVAL) - -#define FRTIZ4020_OFFSET_URLADER_WIFI_MAC_REVERSE 0x1979 - - -static struct spi_gpio_platform_data fritz4020_spi_data = { - .sck = FRITZ4020_GPIO_SHIFT_SRCLK, - .miso = SPI_GPIO_NO_MISO, - .mosi = FRITZ4020_GPIO_SHIFT_SER, - .num_chipselect = 1, -}; - -static u8 fritz4020_ssr_initdata[] = { - BIT(FRITZ4020_SSR_BIT_7) | - BIT(FRITZ4020_SSR_BIT_6) | - BIT(FRITZ4020_SSR_BIT_5) | - BIT(FRITZ4020_SSR_BIT_4) | - BIT(FRITZ4020_SSR_BIT_3) | - BIT(FRITZ4020_SSR_BIT_2) | - BIT(FRITZ4020_SSR_BIT_1) -}; - -static struct gen_74x164_chip_platform_data fritz4020_ssr_data = { - .base = FRITZ4020_74HC_GPIO_BASE, - .num_registers = ARRAY_SIZE(fritz4020_ssr_initdata), - .init_data = fritz4020_ssr_initdata, -}; - -static struct platform_device fritz4020_spi_device = { - .name = "spi_gpio", - .id = 1, - .dev = { - .platform_data = &fritz4020_spi_data, - }, -}; - -static struct spi_board_info fritz4020_spi_info[] = { - { - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 10000000, - .modalias = "74x164", - .platform_data = &fritz4020_ssr_data, - .controller_data = (void *) 0x0, - }, -}; - -static struct mtd_partition fritz4020_flash_partitions[] = { - { - .name = "urlader", - .offset = 0, - .size = 0x0020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x0020000, - .size = 0x0EE0000, - }, { - .name = "tffs (1)", - .offset = 0x0f00000, - .size = 0x0080000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "tffs (2)", - .offset = 0x0f80000, - .size = 0x0080000, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct flash_platform_data fritz4020_flash_data = { - .parts = fritz4020_flash_partitions, - .nr_parts = ARRAY_SIZE(fritz4020_flash_partitions), -}; - -static struct gpio_led fritz4020_leds_gpio[] __initdata = { - { - .name = "fritz4020:green:lan", - .gpio = FRITZ4020_74HC_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "fritz4020:green:info", - .gpio = FRITZ4020_74HC_GPIO_LED_INFO, - .active_low = 1, - }, { - .name = "fritz4020:red:info", - .gpio = FRITZ4020_74HC_GPIO_LED_INFO_RED, - .active_low = 1, - }, { - .name = "fritz4020:green:power", - .gpio = FRITZ4020_74HC_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "fritz4020:green:wlan", - .gpio = FRITZ4020_74HC_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "fritz4020:green:wan", - .gpio = FRITZ4020_74HC_GPIO_LED_WAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button fritz4020_gpio_keys[] __initdata = { - { - .desc = "RFKILL button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = FRITZ4020_KEYS_DEBOUNCE_INTERVAL, - .gpio = FRITZ4020_GPIO_BTN_WLAN, - .active_low = 1, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = FRITZ4020_KEYS_DEBOUNCE_INTERVAL, - .gpio = FRITZ4020_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - -static void __init fritz4020_setup(void) { - u8 *urlader = (u8 *) KSEG1ADDR(0x1f000000); - u8 wifi_mac[ETH_ALEN]; - - ath79_register_m25p80(&fritz4020_flash_data); - - /* Initialize ethernet */ - ath79_extract_mac_reverse(urlader + FRTIZ4020_OFFSET_URLADER_WIFI_MAC_REVERSE, wifi_mac); - ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP | - QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP); - - ath79_register_mdio(0, 0x0); - ath79_register_mdio(1, 0x0); - ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, -1); - ath79_init_mac(ath79_eth1_data.mac_addr, wifi_mac, -2); - - /* WAN port */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - ath79_register_eth(0); - - /* LAN ports */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_switch_data.phy_poll_mask |= BIT(0); - ath79_switch_data.phy4_mii_en = 1; - ath79_register_eth(1); - - /* Initialize 2.4GHz WiFi */ - ath79_register_wmac_simple(); - - /* Activate USB Power */ - gpio_request_one(FRITZ4020_74HC_GPIO_USB_RST, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - - /* Initialize USB port */ - ath79_register_usb(); - - /* Register LED shift-register */ - spi_register_board_info(fritz4020_spi_info, - ARRAY_SIZE(fritz4020_spi_info)); - platform_device_register(&fritz4020_spi_device); - - /* Register GPIO buttons */ - ath79_register_gpio_keys_polled(-1, FRITZ4020_KEYS_POLL_INTERVAL, - ARRAY_SIZE(fritz4020_gpio_keys), - fritz4020_gpio_keys); - - /* Register LEDs */ - ath79_register_leds_gpio(-1, ARRAY_SIZE(fritz4020_leds_gpio), - fritz4020_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_FRITZ4020, "FRITZ4020", - "AVM FRITZ!Box 4020", fritz4020_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c deleted file mode 100644 index 5bded81a4d..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * AVM FRITZ!WLAN Repeater 450E board support - * - * Copyright (C) 2018 David Bauer <mail@david-bauer.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/ath9k_platform.h> -#include <linux/etherdevice.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_data/mdio-gpio.h> -#include <linux/platform_data/phy-at803x.h> -#include <linux/spi/spi_gpio.h> -#include <linux/spi/74x164.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define FRITZ450E_GPIO_LED_POWER 14 -#define FRITZ450E_GPIO_LED_LAN 13 -#define FRITZ450E_GPIO_LED_WLAN 15 -#define FRITZ450E_GPIO_LED_RSSI2 16 -#define FRITZ450E_GPIO_LED_RSSI3 17 -#define FRITZ450E_GPIO_LED_RSSI4 18 - -#define FRITZ450E_GPIO_BTN_WPS 4 -#define FRITZ450E_KEYS_POLL_INTERVAL 20 /* msecs */ -#define FRITZ450E_KEYS_DEBOUNCE_INTERVAL (3 * FRITZ450E_KEYS_POLL_INTERVAL) - -#define FRITZ450E_PHY_ADDRESS 0 -#define FRITZ450E_GPIO_PHY_RESET 11 -#define FRITZ450E_GPIO_MDIO_CLK 12 -#define FRITZ450E_GPIO_MDIO_DATA 19 - -#define FRITZ450E_OFFSET_URLADER_WIFI_MAC_REVERSE 0x1979 - - -static struct mtd_partition fritz450E_flash_partitions[] = { - { - .name = "urlader", - .offset = 0, - .size = 0x0020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x0020000, - .size = 0x0EE0000, - }, { - .name = "tffs (1)", - .offset = 0x0f00000, - .size = 0x0080000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "tffs (2)", - .offset = 0x0f80000, - .size = 0x0080000, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct flash_platform_data fritz450E_flash_data = { - .parts = fritz450E_flash_partitions, - .nr_parts = ARRAY_SIZE(fritz450E_flash_partitions), -}; - -static struct gpio_led fritz450E_leds_gpio[] __initdata = { - { - .name = "fritz450e:green:lan", - .gpio = FRITZ450E_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "fritz450e:green:rssi2", - .gpio = FRITZ450E_GPIO_LED_RSSI2, - .active_low = 1, - }, { - .name = "fritz450e:green:rssi3", - .gpio = FRITZ450E_GPIO_LED_RSSI3, - .active_low = 1, - }, { - .name = "fritz450e:green:rssi4", - .gpio = FRITZ450E_GPIO_LED_RSSI4, - .active_low = 1, - }, { - .name = "fritz450e:green:wlan", - .gpio = FRITZ450E_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "fritz450e:green:power", - .gpio = FRITZ450E_GPIO_LED_POWER, - .active_low = 0, - }, -}; - -static struct gpio_keys_button fritz450E_gpio_keys[] __initdata = { - { - .desc = "WPS Button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = FRITZ450E_KEYS_DEBOUNCE_INTERVAL, - .gpio = FRITZ450E_GPIO_BTN_WPS, - .active_low = 0, - } -}; - -static struct at803x_platform_data fritz450E_at803x_data = { - .disable_smarteee = 1, - .has_reset_gpio = 1, - .override_sgmii_aneg = 1, - .reset_gpio = FRITZ450E_GPIO_PHY_RESET, -}; - -static struct mdio_board_info fritz450E_mdio_info[] = { - { - .bus_id = "ag71xx-mdio.1", - .mdio_addr = FRITZ450E_PHY_ADDRESS, - .platform_data = &fritz450E_at803x_data, - }, -}; - -static void __init fritz450E_setup(void) { - u8 *urlader = (u8 *) KSEG1ADDR(0x1f000000); - u8 wifi_mac[ETH_ALEN]; - - ath79_register_m25p80(&fritz450E_flash_data); - - gpio_request_one(FRITZ450E_GPIO_MDIO_CLK, GPIOF_OUT_INIT_HIGH, "MDC Pull-UP"); - gpio_request_one(FRITZ450E_GPIO_MDIO_DATA, GPIOF_OUT_INIT_HIGH, "MDIO Pull-UP"); - gpio_request_one(FRITZ450E_GPIO_PHY_RESET, GPIOF_OUT_INIT_HIGH, "PHY reset"); - - /* Register PHY device */ - mdiobus_register_board_info(fritz450E_mdio_info, - ARRAY_SIZE(fritz450E_mdio_info)); - - /* Initialize Ethernet */ - ath79_extract_mac_reverse(urlader + FRITZ450E_OFFSET_URLADER_WIFI_MAC_REVERSE, wifi_mac); - ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, -2); - - ath79_register_mdio(1, ~BIT(FRITZ450E_PHY_ADDRESS)); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth0_data.phy_mask = BIT(FRITZ450E_PHY_ADDRESS); - ath79_eth0_data.enable_sgmii_fixup = 1; - ath79_eth0_pll_data.pll_1000 = 0x03000000; - ath79_eth0_pll_data.pll_100 = 0x00000101; - ath79_eth0_pll_data.pll_10 = 0x00001313; - ath79_register_eth(0); - - /* Initialize 2.4GHz WiFi */ - ath79_register_wmac_simple(); - - /* Register GPIO buttons */ - ath79_register_gpio_keys_polled(-1, FRITZ450E_KEYS_POLL_INTERVAL, - ARRAY_SIZE(fritz450E_gpio_keys), - fritz450E_gpio_keys); - - /* Register LEDs */ - ath79_register_leds_gpio(-1, ARRAY_SIZE(fritz450E_leds_gpio), - fritz450E_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_FRITZ450E, "FRITZ450E", - "AVM FRITZ!WLAN Repeater 450E", fritz450E_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar150.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar150.c deleted file mode 100644 index 9febc7a839..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar150.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * GL_ar150 board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2013 alzhao <alzhao@gmail.com> - * Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. -*/ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define GL_AR150_GPIO_LED_WLAN 0 -#define GL_AR150_GPIO_LED_LAN 13 -#define GL_AR150_GPIO_LED_WAN 15 - -#define GL_AR150_GPIO_BIN_USB 6 -#define GL_AR150_GPIO_BTN_MANUAL 7 -#define GL_AR150_GPIO_BTN_AUTO 8 -#define GL_AR150_GPIO_BTN_RESET 11 - -#define GL_AR150_KEYS_POLL_INTERVAL 20 /* msecs */ -#define GL_AR150_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR150_KEYS_POLL_INTERVAL) - -#define GL_AR150_MAC0_OFFSET 0x0000 -#define GL_AR150_MAC1_OFFSET 0x0000 -#define GL_AR150_CALDATA_OFFSET 0x1000 -#define GL_AR150_WMAC_MAC_OFFSET 0x0000 - -static struct gpio_led gl_ar150_leds_gpio[] __initdata = { - { - .name = "gl-ar150:orange:wlan", - .gpio = GL_AR150_GPIO_LED_WLAN, - .active_low = 0, - }, - { - .name = "gl-ar150:green:lan", - .gpio = GL_AR150_GPIO_LED_LAN, - .active_low = 0, - }, - { - .name = "gl-ar150:green:wan", - .gpio = GL_AR150_GPIO_LED_WAN, - .active_low = 0, - .default_state = 1, - }, -}; - -static struct gpio_keys_button gl_ar150_gpio_keys[] __initdata = { - { - .desc = "BTN_7", - .type = EV_KEY, - .code = BTN_7, - .debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL, - .gpio = GL_AR150_GPIO_BTN_MANUAL, - .active_low = 0, - }, - { - .desc = "BTN_8", - .type = EV_KEY, - .code = BTN_8, - .debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL, - .gpio = GL_AR150_GPIO_BTN_AUTO, - .active_low = 0, - }, - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL, - .gpio = GL_AR150_GPIO_BTN_RESET, - .active_low = 0, - }, -}; - -static void __init gl_ar150_setup(void) -{ - - /* ART base address */ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ - ath79_setup_ar933x_phy4_switch(false, false); - - /* register flash. */ - ath79_register_m25p80(NULL); - - /* register gpio LEDs and keys */ - ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar150_leds_gpio), - gl_ar150_leds_gpio); - ath79_register_gpio_keys_polled(-1, GL_AR150_KEYS_POLL_INTERVAL, - ARRAY_SIZE(gl_ar150_gpio_keys), - gl_ar150_gpio_keys); - - /* enable usb */ - gpio_request_one(GL_AR150_GPIO_BIN_USB, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); - - /* register eth0 as WAN, eth1 as LAN */ - ath79_init_mac(ath79_eth0_data.mac_addr, art+GL_AR150_MAC0_OFFSET, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, art+GL_AR150_MAC1_OFFSET, 0); - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - ath79_register_eth(1); - - /* register wireless mac with cal data */ - ath79_register_wmac(art + GL_AR150_CALDATA_OFFSET, art + GL_AR150_WMAC_MAC_OFFSET); -} - -MIPS_MACHINE(ATH79_MACH_GL_AR150, "GL-AR150", "GL.iNet GL-AR150", gl_ar150_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300.c deleted file mode 100644 index 1708d696b8..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Domino board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2013 alzhao <alzhao@gmail.com> - * Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. -*/ - -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define GL_AR300_GPIO_LED_WLAN 13 -#define GL_AR300_GPIO_LED_WAN 14 -#define GL_AR300_GPIO_BTN_RESET 16 - - -#define GL_AR300_KEYS_POLL_INTERVAL 20 /* msecs */ -#define GL_AR300_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR300_KEYS_POLL_INTERVAL) - -#define GL_AR300_MAC0_OFFSET 0x0000 -#define GL_AR300_MAC1_OFFSET 0x0000 -#define GL_AR300_CALDATA_OFFSET 0x1000 -#define GL_AR300_WMAC_MAC_OFFSET 0x0000 - -static struct gpio_led gl_ar300_leds_gpio[] __initdata = { - { - .name = "gl-ar300:wlan", - .gpio = GL_AR300_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "gl-ar300:wan", - .gpio = GL_AR300_GPIO_LED_WAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button gl_ar300_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = GL_AR300_KEYS_DEBOUNCE_INTERVAL, - .gpio = GL_AR300_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static void __init gl_ar300_setup(void) -{ - - /* ART base address */ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - /* register flash. */ - ath79_register_m25p80(NULL); - - /* register gpio LEDs and keys */ - ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar300_leds_gpio), - gl_ar300_leds_gpio); - ath79_register_gpio_keys_polled(-1, GL_AR300_KEYS_POLL_INTERVAL, - ARRAY_SIZE(gl_ar300_gpio_keys), - gl_ar300_gpio_keys); - - /* enable usb */ - ath79_register_usb(); - ath79_register_mdio(1, 0x0); - - /* register eth0 as WAN, eth1 as LAN */ - ath79_init_mac(ath79_eth0_data.mac_addr, art+GL_AR300_MAC0_OFFSET, 0); - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(4); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_register_eth(0); - - ath79_init_mac(ath79_eth1_data.mac_addr, art+GL_AR300_MAC1_OFFSET, 0); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_register_eth(1); - - /* register wireless mac with cal data */ - ath79_register_wmac(art + GL_AR300_CALDATA_OFFSET, art + GL_AR300_WMAC_MAC_OFFSET); -} - -MIPS_MACHINE(ATH79_MACH_GL_AR300, "GL-AR300", "GL.iNet GL-AR300", gl_ar300_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c deleted file mode 100644 index d10a910129..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * GLI AR300M(D) board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2013 alzhao <alzhao@gmail.com> - * Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/pci.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-spi.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define GL_AR300M_GPIO_LED_WLAN 14 -#define GL_AR300M_GPIO_LED_LAN 13 -#define GL_AR300M_GPIO_LED_SYSTEM 12 -#define GL_AR300M_GPIO_BTN_RESET 3 -#define GL_AR300M_GPIO_BTN_LEFT 0 -#define GL_AR300M_GPIO_BTN_RIGHT 1 - -#define GL_AR300M_KEYS_POLL_INTERVAL 20 /* msecs */ -#define GL_AR300M_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR300M_KEYS_POLL_INTERVAL) - -#define GL_AR300M_MAC0_OFFSET 0 -#define GL_AR300M_MAC1_OFFSET 6 -#define GL_AR300M_WMAC_CALDATA_OFFSET 0x1000 -#define GL_AR300M_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led gl_ar300m_leds_gpio[] __initdata = { - { - .name = "gl-ar300m:red:wlan", - .gpio = GL_AR300M_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "gl-ar300m:green:lan", - .gpio = GL_AR300M_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "gl-ar300m:green:system", - .gpio = GL_AR300M_GPIO_LED_SYSTEM, - .active_low = 1, - .default_state = 1, - }, -}; - -static struct gpio_keys_button gl_ar300m_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL, - .gpio = GL_AR300M_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "button right", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL, - .gpio = GL_AR300M_GPIO_BTN_LEFT, - .active_low = 0, - }, - { - .desc = "button left", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL, - .gpio = GL_AR300M_GPIO_BTN_RIGHT, - .active_low = 0, - }, -}; - -static struct spi_board_info gl_ar300m_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - .platform_data = NULL, - }, - { - .bus_num = 0, - .chip_select = 1, - .max_speed_hz = 25000000, - .modalias = "ath79-spinand", - .platform_data = NULL, - } -}; - -static struct ath79_spi_platform_data gl_ar300m_spi_data = { - .bus_num = 0, - .num_chipselect = 2, -}; - -static void __init gl_ar300m_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 tmpmac[ETH_ALEN]; - - ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); - ath79_register_spi(&gl_ar300m_spi_data, gl_ar300m_spi_info, 2); - - /* register gpio LEDs and keys */ - ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar300m_leds_gpio), - gl_ar300m_leds_gpio); - ath79_register_gpio_keys_polled(-1, GL_AR300M_KEYS_POLL_INTERVAL, - ARRAY_SIZE(gl_ar300m_gpio_keys), - gl_ar300m_gpio_keys); - - ath79_register_mdio(0, 0x0); - - /* WAN */ - ath79_init_mac(ath79_eth0_data.mac_addr, art + GL_AR300M_MAC0_OFFSET, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(4); - ath79_register_eth(0); - - /* LAN */ - ath79_init_mac(ath79_eth1_data.mac_addr, art + GL_AR300M_MAC1_OFFSET, 0); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_switch_data.phy_poll_mask |= BIT(4); - ath79_switch_data.phy4_mii_en = 1; - ath79_register_eth(1); - - ath79_init_mac(tmpmac, art + GL_AR300M_WMAC_CALDATA_OFFSET + 2, 0); - ath79_register_wmac(art + GL_AR300M_WMAC_CALDATA_OFFSET, tmpmac); - - /* enable usb */ - ath79_register_usb(); - /* enable pci */ - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_GL_AR300M, "GL-AR300M", "GL.iNet GL-AR300M", gl_ar300m_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c deleted file mode 100644 index 9ee6e29c02..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * GL.iNet GL-AR750 board support - * - * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/i2c.h> -#include <linux/i2c-gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define GL_AR750_GPIO_LED_POWER 12 -#define GL_AR750_GPIO_LED_WLAN2G 14 -#define GL_AR750_GPIO_LED_WLAN5G 13 - -#define GL_AR750_GPIO_BTN_RESET 3 -#define GL_AR750_GPIO_BTN_SW1 0 - -#define GL_AR750_GPIO_I2C_SCL 16 -#define GL_AR750_GPIO_I2C_SDA 17 - -#define GL_AR750_GPIO_USB_POWER 2 - -#define GL_AR750_KEYS_POLL_INTERVAL 20 -#define GL_AR750_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR750_KEYS_POLL_INTERVAL) - -#define GL_AR750_MAC0_OFFSET 0 -#define GL_AR750_WMAC2G_CALDATA_OFFSET 0x1000 -#define GL_AR750_WMAC5G_CALDATA_OFFSET 0x5000 - -static struct gpio_led gl_ar750_leds_gpio[] __initdata = { - { - .name = "gl-ar750:white:power", - .gpio = GL_AR750_GPIO_LED_POWER, - .default_state = LEDS_GPIO_DEFSTATE_KEEP, - .active_low = 1, - }, { - .name = "gl-ar750:white:wlan2g", - .gpio = GL_AR750_GPIO_LED_WLAN2G, - .active_low = 1, - }, { - .name = "gl-ar750:white:wlan5g", - .gpio = GL_AR750_GPIO_LED_WLAN5G, - .active_low = 1, - }, -}; - -static struct gpio_keys_button gl_ar750_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = GL_AR750_KEYS_DEBOUNCE_INTERVAL, - .gpio = GL_AR750_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "sw1", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = GL_AR750_KEYS_DEBOUNCE_INTERVAL, - .gpio = GL_AR750_GPIO_BTN_SW1, - .active_low = 1, - }, -}; - -static struct i2c_gpio_platform_data gl_ar750_i2c_gpio_data = { - .sda_pin = GL_AR750_GPIO_I2C_SDA, - .scl_pin = GL_AR750_GPIO_I2C_SCL, -}; - -static struct platform_device gl_ar750_i2c_gpio = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &gl_ar750_i2c_gpio_data, - }, -}; - -static void __init gl_ar750_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1f050000); - - ath79_register_m25p80(NULL); - - ath79_setup_ar933x_phy4_switch(false, false); - ath79_register_mdio(0, 0x0); - - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = 0xfc; - - /* WAN */ - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.speed = SPEED_100; - ath79_init_mac(ath79_eth0_data.mac_addr, art + GL_AR750_MAC0_OFFSET, 0); - ath79_register_eth(0); - - /* LAN */ - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_init_mac(ath79_eth1_data.mac_addr, art + GL_AR750_MAC0_OFFSET, 1); - ath79_register_eth(1); - - /* Disable JTAG (enables GPIO0-3) */ - ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar750_leds_gpio), - gl_ar750_leds_gpio); - - ath79_register_gpio_keys_polled(-1, GL_AR750_KEYS_POLL_INTERVAL, - ARRAY_SIZE(gl_ar750_gpio_keys), - gl_ar750_gpio_keys); - - gpio_request_one(GL_AR750_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - - platform_device_register(&gl_ar750_i2c_gpio); - - ath79_register_usb(); - - ath79_register_wmac(art + GL_AR750_WMAC2G_CALDATA_OFFSET, NULL); - - ap91_pci_init(art + GL_AR750_WMAC5G_CALDATA_OFFSET, NULL); -} - -MIPS_MACHINE(ATH79_MACH_GL_AR750, "GL-AR750", "GL.iNet GL-AR750", - gl_ar750_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750s.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750s.c deleted file mode 100644 index cc5d759273..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750s.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * GL.iNet GL-AR750S board support - * - * Copyright (C) 2018 luochongjun <luochongjun@gl-inet.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/etherdevice.h> - -#include <linux/i2c.h> -#include <linux/i2c-gpio.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/irq.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include <linux/platform_data/phy-at803x.h> -#include <linux/ar8216_platform.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-spi.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "dev-usb.h" -#include "machtypes.h" - - -#define GL_AR750S_KEYS_POLL_INTERVAL 20 -#define GL_AR750S_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR750S_KEYS_POLL_INTERVAL) - - -#define GL_AR750S_GPIO_LED_WLAN2G 19 -#define GL_AR750S_GPIO_LED_WLAN5G 20 -#define GL_AR750S_GPIO_LED_POWER 1 -#define GL_AR750S_GPIO_USB_POWER 7 - -#define GL_AR750S_GPIO_BTN_RESET 2 -#define GL_AR750S_GPIO_BTN_RIGHT 8 - -#define GL_AR750S_MAC0_OFFSET 0x0000 -#define GL_AR750S_WMAC_CALDATA_OFFSET 0x1000 -#define GL_AR750S_PCI_CALDATA_OFFSET 0x5000 - -#define GL_AR750S_GPIO_I2C_SDA 5 -#define GL_AR750S_GPIO_I2C_SCL 21 - - - -static struct spi_board_info gl_ar750s_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - .platform_data = NULL, - }, -}; - -static struct ath79_spi_platform_data gl_ar750s_spi_data = { - .bus_num = 0, - .num_chipselect = 2, -}; - -static struct gpio_led gl_ar750s_leds_gpio[] __initdata = { - { - .name = "gl-ar750s:green:power", - .gpio = GL_AR750S_GPIO_LED_POWER, - .default_state = LEDS_GPIO_DEFSTATE_KEEP, - .active_low = 1, - },{ - .name = "gl-ar750s:green:usbpower", - .gpio = GL_AR750S_GPIO_USB_POWER, - .active_low = 1, - },{ - .name = "gl-ar750s:green:wlan2g", - .gpio = GL_AR750S_GPIO_LED_WLAN2G, - .active_low = 1, - },{ - .name = "gl-ar750s:green:wlan5g", - .gpio = GL_AR750S_GPIO_LED_WLAN5G, - .active_low = 0, - } -}; - -static struct gpio_keys_button gl_ar750s_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = GL_AR750S_KEYS_DEBOUNCE_INTERVAL, - .gpio = GL_AR750S_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "right", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = GL_AR750S_KEYS_DEBOUNCE_INTERVAL, - .gpio = GL_AR750S_GPIO_BTN_RIGHT, - .active_low = 1, - }, -}; - -static struct i2c_gpio_platform_data gl_ar750s_i2c_gpio_data = { - .sda_pin = GL_AR750S_GPIO_I2C_SDA, - .scl_pin = GL_AR750S_GPIO_I2C_SCL, -}; - -static struct platform_device gl_ar750s_i2c_gpio_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &gl_ar750s_i2c_gpio_data, - } - -}; - -static struct ar8327_pad_cfg gl_ar750s_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -static struct ar8327_platform_data gl_ar750s_ar8327_data = { - .pad0_cfg = &gl_ar750s_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - - -static struct mdio_board_info gl_ar750s_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &gl_ar750s_ar8327_data, - }, -}; - -static void __init gl_ar750s_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1f050000); - - ath79_register_spi(&gl_ar750s_spi_data, gl_ar750s_spi_info, 1); - - ath79_init_mac(ath79_eth0_data.mac_addr, - eeprom + GL_AR750S_MAC0_OFFSET, 0); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_mask = BIT(0); - - mdiobus_register_board_info(gl_ar750s_mdio0_info, - ARRAY_SIZE(gl_ar750s_mdio0_info)); - - ath79_register_mdio(0, 0x00); - ath79_register_eth(0); - - - ath79_register_usb(); - - - ath79_register_wmac(eeprom + GL_AR750S_WMAC_CALDATA_OFFSET, NULL); - - - ap91_pci_init(eeprom + GL_AR750S_PCI_CALDATA_OFFSET, NULL); - - platform_device_register(&gl_ar750s_i2c_gpio_device); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar750s_leds_gpio), - gl_ar750s_leds_gpio); - - ath79_register_gpio_keys_polled(-1, GL_AR750S_KEYS_POLL_INTERVAL, - ARRAY_SIZE(gl_ar750s_gpio_keys), - gl_ar750s_gpio_keys); -} - - -MIPS_MACHINE(ATH79_MACH_GL_AR750S, "GL-AR750S", "GL-AR750S", - gl_ar750s_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-domino.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-domino.c deleted file mode 100644 index 4ff8ff637e..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-domino.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * Domino board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2013 alzhao <alzhao@gmail.com> - * Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. -*/ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define DOMINO_GPIO_LED_WLAN 0 -#define DOMINO_GPIO_LED_WAN 17 -#define DOMINO_GPIO_LED_USB 1 -#define DOMINO_GPIO_LED_LAN1 13 -#define DOMINO_GPIO_LED_LAN2 14 -#define DOMINO_GPIO_LED_LAN3 15 -#define DOMINO_GPIO_LED_LAN4 16 -#define DOMINO_GPIO_LED_SYS 27 -#define DOMINO_GPIO_LED_WPS 26 -#define DOMINO_GPIO_USB_POWER 6 - -#define DOMINO_GPIO_BTN_RESET 11 -#define DOMINO_GPIO_BTN_WPS 20 - -#define DOMINO_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DOMINO_KEYS_DEBOUNCE_INTERVAL (3 * DOMINO_KEYS_POLL_INTERVAL) - -#define DOMINO_MAC0_OFFSET 0x0000 -#define DOMINO_MAC1_OFFSET 0x0000 -#define DOMINO_CALDATA_OFFSET 0x1000 -#define DOMINO_WMAC_MAC_OFFSET 0x0000 - -static struct gpio_led domino_leds_gpio[] __initdata = { - { - .name = "gl-domino:blue:wlan", - .gpio = DOMINO_GPIO_LED_WLAN, - .active_low = 0, - }, - { - .name = "gl-domino:red:wan", - .gpio = DOMINO_GPIO_LED_WAN, - .active_low = 1, - }, - { - .name = "gl-domino:white:usb", - .gpio = DOMINO_GPIO_LED_USB, - .active_low = 0, - }, - { - .name = "gl-domino:green:lan1", - .gpio = DOMINO_GPIO_LED_LAN1, - .active_low = 0, - }, - { - .name = "gl-domino:yellow:wps", - .gpio = DOMINO_GPIO_LED_WPS, - .active_low = 1, - }, - { - .name = "gl-domino:orange:sys", - .gpio = DOMINO_GPIO_LED_SYS, - .active_low = 1, - }, -}; - -static struct gpio_keys_button domino_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DOMINO_KEYS_DEBOUNCE_INTERVAL, - .gpio = DOMINO_GPIO_BTN_RESET, - .active_low = 0, - }, - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DOMINO_KEYS_DEBOUNCE_INTERVAL, - .gpio = DOMINO_GPIO_BTN_WPS, - .active_low = 0, - } -}; - -static void __init domino_setup(void) -{ - - /* ART base address */ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ - ath79_setup_ar933x_phy4_switch(false, false); - - /* register flash. */ - ath79_register_m25p80(NULL); - - /* register gpio LEDs and keys */ - ath79_register_leds_gpio(-1, ARRAY_SIZE(domino_leds_gpio), - domino_leds_gpio); - ath79_register_gpio_keys_polled(-1, DOMINO_KEYS_POLL_INTERVAL, - ARRAY_SIZE(domino_gpio_keys), - domino_gpio_keys); - - gpio_request_one(DOMINO_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - /* enable usb */ - ath79_register_usb(); - - /* register eth0 as WAN, eth1 as LAN */ - ath79_init_mac(ath79_eth0_data.mac_addr, art+DOMINO_MAC0_OFFSET, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, art+DOMINO_MAC1_OFFSET, 0); - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - ath79_register_eth(1); - - /* register wireless mac with cal data */ - ath79_register_wmac(art + DOMINO_CALDATA_OFFSET, art + DOMINO_WMAC_MAC_OFFSET); -} - -MIPS_MACHINE(ATH79_MACH_GL_DOMINO, "DOMINO", "Domino Pi", domino_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-inet.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-inet.c deleted file mode 100644 index 6f603d9579..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-inet.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * GL-CONNECT iNet board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2013 alzhao <alzhao@gmail.com> - * Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define GL_INET_GPIO_LED_WLAN 0 -#define GL_INET_GPIO_LED_LAN 13 -#define GL_INET_GPIO_BTN_RESET 11 - -#define GL_INET_KEYS_POLL_INTERVAL 20 /* msecs */ -#define GL_INET_KEYS_DEBOUNCE_INTERVAL (3 * GL_INET_KEYS_POLL_INTERVAL) - -static const char * gl_inet_part_probes[] = { - "tp-link", /* dont change, this will use tplink parser */ - NULL , -}; - -static struct flash_platform_data gl_inet_flash_data = { - .part_probes = gl_inet_part_probes, -}; - -static struct gpio_led gl_inet_leds_gpio[] __initdata = { - { - .name = "gl-inet:red:wlan", - .gpio = GL_INET_GPIO_LED_WLAN, - .active_low = 0, - }, - { - .name = "gl-inet:green:lan", - .gpio = GL_INET_GPIO_LED_LAN, - .active_low = 0, - .default_state = 1, - }, -}; - -static struct gpio_keys_button gl_inet_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = GL_INET_KEYS_DEBOUNCE_INTERVAL, - .gpio = GL_INET_GPIO_BTN_RESET, - .active_low = 0, - } -}; - -static void __init gl_inet_setup(void) -{ - /* get the mac address which is stored in the 1st 64k uboot MTD */ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - - /* get the art address, which is the last 64K. By using - 0x1fff1000, it doesn't matter it is 4M, 8M or 16M flash */ - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ - ath79_setup_ar933x_phy4_switch(false, false); - - /* register flash. MTD will use tp-link parser to parser MTD */ - ath79_register_m25p80(&gl_inet_flash_data); - - /* register gpio LEDs and keys */ - ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_inet_leds_gpio), - gl_inet_leds_gpio); - ath79_register_gpio_keys_polled(-1, GL_INET_KEYS_POLL_INTERVAL, - ARRAY_SIZE(gl_inet_gpio_keys), - gl_inet_gpio_keys); - - /* enable usb */ - ath79_register_usb(); - - /* register eth0 as WAN, eth1 as LAN */ - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - ath79_register_eth(1); - - /* register wireless mac with cal data */ - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_GL_INET, "GL-INET", "GL-CONNECT INET v1", - gl_inet_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c deleted file mode 100644 index a5c68ed65a..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * Mifi board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2013 alzhao <alzhao@gmail.com> - * Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. -*/ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define GL_MIFI_GPIO_LED_WAN 27 -#define GL_MIFI_GPIO_LED_LAN 16 -#define GL_MIFI_GPIO_LED_WLAN 1 -#define GL_MIFI_GPIO_LED_NET 0 -#define GL_MIFI_GPIO_LED_3GCONTROL 7 - -#define GL_MIFI_GPIO_BTN_RESET 11 - -#define GL_MIFI_KEYS_POLL_INTERVAL 20 /* msecs */ -#define GL_MIFI_KEYS_DEBOUNCE_INTERVAL (3 * GL_MIFI_KEYS_POLL_INTERVAL) - -#define GL_MIFI_MAC0_OFFSET 0x0000 -#define GL_MIFI_MAC1_OFFSET 0x0000 -#define GL_MIFI_CALDATA_OFFSET 0x1000 -#define GL_MIFI_WMAC_MAC_OFFSET 0x0000 - -static struct gpio_led gl_mifi_leds_gpio[] __initdata = { - { - .name = "gl-mifi:green:wan", - .gpio = GL_MIFI_GPIO_LED_WAN, - .active_low = 0, - }, - { - .name = "gl-mifi:green:lan", - .gpio = GL_MIFI_GPIO_LED_LAN, - .active_low = 0, - }, - { - .name = "gl-mifi:green:wlan", - .gpio = GL_MIFI_GPIO_LED_WLAN, - .active_low = 0, - }, - { - .name = "gl-mifi:green:net", - .gpio = GL_MIFI_GPIO_LED_NET, - .active_low = 0, - }, - { - .name = "gl-mifi:green:3gcontrol", - .gpio = GL_MIFI_GPIO_LED_3GCONTROL, - .active_low = 0, - } -}; - -static struct gpio_keys_button gl_mifi_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = GL_MIFI_KEYS_DEBOUNCE_INTERVAL, - .gpio = GL_MIFI_GPIO_BTN_RESET, - .active_low = 0, - }, -}; - -static void __init gl_mifi_setup(void) -{ - - /* ART base address */ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ - ath79_setup_ar933x_phy4_switch(false, false); - - /* register flash. */ - ath79_register_m25p80(NULL); - - /* register gpio LEDs and keys */ - ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_mifi_leds_gpio), - gl_mifi_leds_gpio); - ath79_register_gpio_keys_polled(-1, GL_MIFI_KEYS_POLL_INTERVAL, - ARRAY_SIZE(gl_mifi_gpio_keys), - gl_mifi_gpio_keys); - - /* enable usb */ - ath79_register_usb(); - - /* register eth0 as WAN, eth1 as LAN */ - ath79_init_mac(ath79_eth0_data.mac_addr, art+GL_MIFI_MAC0_OFFSET, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, art+GL_MIFI_MAC1_OFFSET, 0); - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - ath79_register_eth(1); - - /* register wireless mac with cal data */ - ath79_register_wmac(art + GL_MIFI_CALDATA_OFFSET, art + GL_MIFI_WMAC_MAC_OFFSET); -} - -MIPS_MACHINE(ATH79_MACH_GL_MIFI, "GL-MIFI", "GL.iNet GL-MIFI", gl_mifi_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-usb150.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-usb150.c deleted file mode 100644 index 6cc27e1ada..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-usb150.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * GL.iNet GL-USB150 board support - * - * Copyright (C) 2017 Piotr Dymacz <pepe2k@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define GL_USB150_GPIO_LED_POWER 13 -#define GL_USB150_GPIO_LED_WLAN 0 -#define GL_USB150_GPIO_LAN_RESET 7 -#define GL_USB150_GPIO_BTN_RESET 11 - -#define GL_USB150_KEYS_POLL_INTERVAL 20 -#define GL_USB150_KEYS_DEBOUNCE_INTERVAL \ - (3 * GL_USB150_KEYS_POLL_INTERVAL) - -#define GL_USB150_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led gl_usb150_leds_gpio[] __initdata = { - { - .name = "gl-usb150:green:power", - .gpio = GL_USB150_GPIO_LED_POWER, - .active_low = 0, - }, { - .name = "gl-usb150:green:wlan", - .gpio = GL_USB150_GPIO_LED_WLAN, - .active_low = 0, - }, -}; - -static struct gpio_keys_button gl_usb150_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = GL_USB150_KEYS_DEBOUNCE_INTERVAL, - .gpio = GL_USB150_GPIO_BTN_RESET, - .active_low = 0, - }, -}; - -static void __init gl_usb150_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_setup_ar933x_phy4_switch(false, false); - - /* LAN (PHY4 connected with Realtek RTL8152B) */ - ath79_init_mac(ath79_eth0_data.mac_addr, art, 0); - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_usb150_leds_gpio), - gl_usb150_leds_gpio); - - ath79_register_gpio_keys_polled(-1, GL_USB150_KEYS_POLL_INTERVAL, - ARRAY_SIZE(gl_usb150_gpio_keys), - gl_usb150_gpio_keys); - - gpio_request_one(GL_USB150_GPIO_LAN_RESET, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "LAN reset"); - - ath79_register_wmac(art + GL_USB150_WMAC_CALDATA_OFFSET, NULL); -} - -MIPS_MACHINE(ATH79_MACH_GL_USB150, "GL-USB150", "GL.iNet GL-USB150", - gl_usb150_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-minibox-v32.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-minibox-v32.c deleted file mode 100644 index 469c6f39ea..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-minibox-v32.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Atheros GS_MINIBOX_V3.2 reference board support - * - * Copyright (c) 2018 OpenWRT.org - * Copyright (c) 2013 The Linux Foundation. All rights reserved. - * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/pci.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define GS_MINIBOX_V3_GPIO_LED_STATUS 14 -#define GS_MINIBOX_V3_GPIO_BTN_RST 17 -#define GS_MINIBOX_V3_KEYS_POLL_INTERVAL 20 /* msecs */ -#define GS_MINIBOX_V3_KEYS_DEBOUNCE_INTERVAL (3 * GS_MINIBOX_V3_KEYS_POLL_INTERVAL) -#define GS_MINIBOX_V3_MAC0_OFFSET 0 -#define GS_MINIBOX_V3_MAC1_OFFSET 6 -#define GS_MINIBOX_V3_WMAC_CALDATA_OFFSET 0x1000 - -static const char *gs_minibox_v3_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data gs_minibox_v3_flash_data = { - .part_probes = gs_minibox_v3_part_probes, -}; - -static struct gpio_led gs_minibox_v3_leds_gpio[] __initdata = { - { - .name = "minibox_v3.2:green:system", - .gpio = GS_MINIBOX_V3_GPIO_LED_STATUS, - .active_low = 1, - }, -}; - -static struct gpio_keys_button gs_minibox_v3_gpio_keys[] __initdata = { - { - .desc = "reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = GS_MINIBOX_V3_KEYS_DEBOUNCE_INTERVAL, - .gpio = GS_MINIBOX_V3_GPIO_BTN_RST, - .active_low = 1, - }, -}; - -static void __init gs_minibox_v3_gpio_led_setup(void) -{ - ath79_register_leds_gpio(-1, ARRAY_SIZE(gs_minibox_v3_leds_gpio), - gs_minibox_v3_leds_gpio); - ath79_register_gpio_keys_polled(-1, GS_MINIBOX_V3_KEYS_POLL_INTERVAL, - ARRAY_SIZE(gs_minibox_v3_gpio_keys), - gs_minibox_v3_gpio_keys); -} - -static void __init gs_minibox_v3_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(&gs_minibox_v3_flash_data); - gs_minibox_v3_gpio_led_setup(); - - ath79_register_usb(); - - ath79_register_wmac(art + GS_MINIBOX_V3_WMAC_CALDATA_OFFSET, NULL); - ath79_register_mdio(0, 0x0); - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + GS_MINIBOX_V3_MAC0_OFFSET, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, art + GS_MINIBOX_V3_MAC1_OFFSET, 0); - - /* WAN port */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(4); - ath79_register_eth(0); - - /* LAN ports */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_switch_data.phy_poll_mask |= BIT(4); - ath79_switch_data.phy4_mii_en = 1; - ath79_register_eth(1); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_GS_MINIBOX_V32, "MINIBOX-V3.2", "Minibox V3.2", - gs_minibox_v3_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite-v1.c deleted file mode 100644 index d424e0f111..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite-v1.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * GainStrong Oolite/MiniBox V1.0 boards support - * - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "dev-usb.h" - -#define GS_MINIBOX_V1_GPIO_BTN_RESET 11 -#define GS_MINIBOX_V1_GPIO_LED_SYSTEM 1 - -#define GS_OOLITE_V1_GPIO_BTN6 6 -#define GS_OOLITE_V1_GPIO_BTN7 7 -#define GS_OOLITE_V1_GPIO_BTN_RESET 11 -#define GS_OOLITE_V1_GPIO_LED_SYSTEM 27 - -#define GS_KEYS_POLL_INTERVAL 20 /* msecs */ -#define GS_KEYS_DEBOUNCE_INTERVAL (3 * GS_KEYS_POLL_INTERVAL) - -static const char *gs_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data gs_flash_data = { - .part_probes = gs_part_probes, -}; - -static struct gpio_led gs_minibox_v1_leds_gpio[] __initdata = { - { - .name = "minibox-v1:green:system", - .gpio = GS_MINIBOX_V1_GPIO_LED_SYSTEM, - .active_low = 1, - }, -}; - -static struct gpio_led gs_oolite_v1_leds_gpio[] __initdata = { - { - .name = "oolite-v1:red:system", - .gpio = GS_OOLITE_V1_GPIO_LED_SYSTEM, - .active_low = 1, - }, -}; - -static struct gpio_keys_button gs_minibox_v1_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = GS_KEYS_DEBOUNCE_INTERVAL, - .gpio = GS_MINIBOX_V1_GPIO_BTN_RESET, - .active_low = 0, - }, -}; - -static struct gpio_keys_button gs_oolite_v1_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = GS_KEYS_DEBOUNCE_INTERVAL, - .gpio = GS_OOLITE_V1_GPIO_BTN_RESET, - .active_low = 0, - }, { - .desc = "BTN_6", - .type = EV_KEY, - .code = BTN_6, - .debounce_interval = GS_KEYS_DEBOUNCE_INTERVAL, - .gpio = GS_OOLITE_V1_GPIO_BTN6, - .active_low = 0, - }, { - .desc = "BTN_7", - .type = EV_KEY, - .code = BTN_7, - .debounce_interval = GS_KEYS_DEBOUNCE_INTERVAL, - .gpio = GS_OOLITE_V1_GPIO_BTN7, - .active_low = 0, - }, -}; - -static void __init gs_common_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff1000); - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - - ath79_register_usb(); - - ath79_register_m25p80(&gs_flash_data); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(1); - ath79_register_eth(0); - - ath79_register_wmac(art, mac); -} - -static void __init gs_minibox_v1_setup(void) -{ - gs_common_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(gs_minibox_v1_leds_gpio), - gs_minibox_v1_leds_gpio); - - ath79_register_gpio_keys_polled(-1, GS_KEYS_POLL_INTERVAL, - ARRAY_SIZE(gs_minibox_v1_gpio_keys), - gs_minibox_v1_gpio_keys); -} - -static void __init gs_oolite_v1_setup(void) -{ - gs_common_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(gs_oolite_v1_leds_gpio), - gs_oolite_v1_leds_gpio); - - ath79_register_gpio_keys_polled(-1, GS_KEYS_POLL_INTERVAL, - ARRAY_SIZE(gs_oolite_v1_gpio_keys), - gs_oolite_v1_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_GS_MINIBOX_V1, "MINIBOX-V1", "GainStrong MiniBox V1.0", - gs_minibox_v1_setup); - -MIPS_MACHINE(ATH79_MACH_GS_OOLITE_V1, "OOLITE-V1", "GainStrong Oolite V1.0", - gs_oolite_v1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite-v5-2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite-v5-2.c deleted file mode 100644 index 64dc4f3345..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite-v5-2.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * GainStrong Oolite V5.2 module and development board support - * - * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define GS_OOLITE_V5_2_DEV_GPIO_BTN_RESET 17 -#define GS_OOLITE_V5_2_DEV_GPIO_LED_SYSTEM 13 - -#define GS_KEYS_POLL_INTERVAL 20 /* msec */ -#define GS_KEYS_DEBOUNCE_INTERVAL (3 * GS_KEYS_POLL_INTERVAL) - -#define GS_OOLITE_V5_2_WMAC_CALDATA_OFFSET 0x1000 - -static const char *gs_oolite_v5_2_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data gs_oolite_v5_2_flash_data = { - .part_probes = gs_oolite_v5_2_part_probes, -}; - -static struct gpio_led gs_oolite_v5_2_dev_gpio_leds[] __initdata = { - { - .name = "oolite-v5.2-dev:blue:system", - .gpio = GS_OOLITE_V5_2_DEV_GPIO_LED_SYSTEM, - .active_low = 0, - }, -}; - -static struct gpio_keys_button gs_oolite_v5_2_dev_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = GS_KEYS_DEBOUNCE_INTERVAL, - .gpio = GS_OOLITE_V5_2_DEV_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static void __init gs_oolite_v5_2_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(&gs_oolite_v5_2_flash_data); - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_mdio(0, 0x0); - - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask |= BIT(4); - - /* LAN */ - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_init_mac(ath79_eth1_data.mac_addr, art + 6, 0); - ath79_register_eth(1); - - /* WAN */ - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.speed = SPEED_100; - ath79_init_mac(ath79_eth0_data.mac_addr, art, 0); - ath79_register_eth(0); - - ath79_register_pci(); - ath79_register_usb(); - ath79_register_wmac(art + GS_OOLITE_V5_2_WMAC_CALDATA_OFFSET, NULL); -} - -static void __init gs_oolite_v5_2_dev_setup(void) -{ - gs_oolite_v5_2_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(gs_oolite_v5_2_dev_gpio_leds), - gs_oolite_v5_2_dev_gpio_leds); - - ath79_register_gpio_keys_polled(-1, GS_KEYS_POLL_INTERVAL, - ARRAY_SIZE(gs_oolite_v5_2_dev_gpio_keys), - gs_oolite_v5_2_dev_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_GS_OOLITE_V5_2, "OOLITE-V5-2", - "GainStrong Oolite V5.2", gs_oolite_v5_2_setup); - -MIPS_MACHINE(ATH79_MACH_GS_OOLITE_V5_2_DEV, "OOLITE-V5-2-DEV", - "GainStrong Oolite V5.2-Dev", gs_oolite_v5_2_dev_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-hiveap-121.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-hiveap-121.c deleted file mode 100644 index 5cbb2054f7..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-hiveap-121.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * Aerohive HiveAP 121 board support - * - * Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ -#include <linux/gpio.h> -#include <linux/i2c.h> -#include <linux/i2c-gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/platform/ar934x_nfc.h> -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-nfc.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "dev-ap9x-pci.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -#define HIVEAP_121_GPIO_LED_ORANGE 14 -#define HIVEAP_121_GPIO_LED_WHITE 21 -#define HIVEAP_121_GPIO_I2C_SCL 12 -#define HIVEAP_121_GPIO_I2C_SDA 13 -#define HIVEAP_121_GPIO_XLNA0 20 -#define HIVEAP_121_GPIO_XLNA1 19 -#define HIVEAP_121_GPIO_USB_POWER 15 - -#define HIVEAP_121_GPIO_BTN_RESET 4 -#define HIVEAP_121_KEYS_POLL_INTERVAL 20 /* msecs */ -#define HIVEAP_121_KEYS_DEBOUNCE_INTERVAL \ - (3 * HIVEAP_121_KEYS_POLL_INTERVAL) - -#define HIVEAP_121_MAC_OFFSET 0x90000 - -#define HIVEAP_121_LAN_PHYADDR 0 - -static struct gpio_led hiveap_121_leds_gpio[] __initdata = { - { - .name = "hiveap-121:orange:power", - .gpio = HIVEAP_121_GPIO_LED_ORANGE, - .active_low = 1, - }, { - .name = "hiveap-121:white:power", - .gpio = HIVEAP_121_GPIO_LED_WHITE, - .active_low = 1, - } -}; - -static struct gpio_keys_button hiveap_121_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = HIVEAP_121_KEYS_DEBOUNCE_INTERVAL, - .gpio = HIVEAP_121_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct i2c_gpio_platform_data hiveap_121_i2c_gpio_data = { - .sda_pin = HIVEAP_121_GPIO_I2C_SDA, - .scl_pin = HIVEAP_121_GPIO_I2C_SCL, -}; - -static struct platform_device hiveap_121_i2c_gpio_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &hiveap_121_i2c_gpio_data, - } -}; - -static struct i2c_board_info tpm_i2c_info[] __initdata = { - { - I2C_BOARD_INFO("tpm_i2c_atmel", 0x29), - } -}; - -static void __init hiveap_121_setup(void) -{ - u8 *base = (u8 *) KSEG1ADDR(0x1f000000); - u8 wlan0_mac[ETH_ALEN]; - u8 wlan1_mac[ETH_ALEN]; - - /* NAND */ - ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW); - ath79_register_nfc(); - - /* SPI */ - ath79_register_m25p80(NULL); - - /* MDIO Interface */ - ath79_register_mdio(0, 0x0); - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | - AR934X_ETH_CFG_RXD_DELAY | - AR934X_ETH_CFG_RDV_DELAY); - - /* GMAC0 is connected to the RGMII interface to an Atheros AR8035-A */ - ath79_init_mac(ath79_eth0_data.mac_addr, - base + HIVEAP_121_MAC_OFFSET, 0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(HIVEAP_121_LAN_PHYADDR); - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_eth0_pll_data.pll_100 = 0x00000101; - ath79_eth0_pll_data.pll_10 = 0x00001313; - ath79_register_eth(0); - - /* i2c */ - ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); - platform_device_register(&hiveap_121_i2c_gpio_device); - - /* TPM */ - i2c_register_board_info(0, tpm_i2c_info, ARRAY_SIZE(tpm_i2c_info)); - - /* LEDs and Buttons */ - ath79_register_leds_gpio(-1, ARRAY_SIZE(hiveap_121_leds_gpio), - hiveap_121_leds_gpio); - ath79_register_gpio_keys_polled(-1, HIVEAP_121_KEYS_POLL_INTERVAL, - ARRAY_SIZE(hiveap_121_gpio_keys), - hiveap_121_gpio_keys); - - /* USB */ - gpio_request_one(HIVEAP_121_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); - - /* XLNA - SoC Wireless */ - ath79_wmac_set_ext_lna_gpio(0, HIVEAP_121_GPIO_XLNA0); - ath79_wmac_set_ext_lna_gpio(1, HIVEAP_121_GPIO_XLNA1); - - /* SoC Wireless */ - ath79_init_mac(wlan0_mac, base + HIVEAP_121_MAC_OFFSET, 1); - ath79_register_wmac(NULL, wlan0_mac); /* Caldata in OTP */ - - /* PCIe Wireless */ - ath79_init_mac(wlan1_mac, base + HIVEAP_121_MAC_OFFSET, 2); - ap91_pci_init(NULL, wlan1_mac); /* Caldata in OTP */ -} - -MIPS_MACHINE(ATH79_MACH_HIVEAP_121, "HiveAP-121", "Aerohive HiveAP-121", - hiveap_121_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-hiwifi-hc6361.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-hiwifi-hc6361.c deleted file mode 100644 index 6600595c05..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-hiwifi-hc6361.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * HiWiFi HC6361 board support - * - * Copyright (C) 2012-2013 eric - * Copyright (C) 2014 Yousong Zhou <yszhou4tech@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/proc_fs.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define HIWIFI_HC6361_GPIO_LED_WLAN_2P4 0 /* 2.4G WLAN LED */ -#define HIWIFI_HC6361_GPIO_LED_SYSTEM 1 /* System LED */ -#define HIWIFI_HC6361_GPIO_LED_INTERNET 27 /* Internet LED */ - -#define HIWIFI_HC6361_GPIO_USBPOWER 20 /* USB power control */ -#define HIWIFI_HC6361_GPIO_BTN_RST 11 /* Reset button */ - -#define HIWIFI_HC6361_KEYS_POLL_INTERVAL 20 /* msecs */ -#define HIWIFI_HC6361_KEYS_DEBOUNCE_INTERVAL \ - (3 * HIWIFI_HC6361_KEYS_POLL_INTERVAL) - -static struct gpio_led hiwifi_leds_gpio[] __initdata = { - { - .name = "hiwifi:blue:wlan-2p4", - .gpio = HIWIFI_HC6361_GPIO_LED_WLAN_2P4, - .active_low = 1, - }, { - .name = "hiwifi:blue:system", - .gpio = HIWIFI_HC6361_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "hiwifi:blue:internet", - .gpio = HIWIFI_HC6361_GPIO_LED_INTERNET, - .active_low = 1, - } -}; - -static struct gpio_keys_button hiwifi_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = HIWIFI_HC6361_KEYS_DEBOUNCE_INTERVAL, - .gpio = HIWIFI_HC6361_GPIO_BTN_RST, - .active_low = 1, - } -}; - -static void __init get_mac_from_bdinfo(u8 *mac, void *bdinfo) -{ - if (sscanf(bdinfo, "fac_mac = %2hhx:%2hhx:%2hhx:%2hhx:%2hhx:%2hhx", - &mac[0], &mac[1], &mac[2], &mac[3], - &mac[4], &mac[5]) == 6) { - return; - } - - printk(KERN_WARNING "Parsing MAC address failed.\n"); - memcpy(mac, "\x00\xba\xbe\x00\x00\x00", 6); -} - -static void __init hiwifi_hc6361_setup(void) -{ - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - u8 mac[6]; - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_m25p80(NULL); - ath79_gpio_function_enable( - AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(hiwifi_leds_gpio), - hiwifi_leds_gpio); - ath79_register_gpio_keys_polled(-1, HIWIFI_HC6361_KEYS_POLL_INTERVAL, - ARRAY_SIZE(hiwifi_gpio_keys), - hiwifi_gpio_keys); - gpio_request_one(HIWIFI_HC6361_GPIO_USBPOWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); - - get_mac_from_bdinfo(mac, (void *) KSEG1ADDR(0x1f010180)); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - - ath79_register_mdio(0, 0x0); - - ath79_register_eth(1); - ath79_register_eth(0); - - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_HIWIFI_HC6361, "HiWiFi-HC6361", - "HiWiFi HC6361", hiwifi_hc6361_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-hornet-ub.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-hornet-ub.c deleted file mode 100644 index 1d21424585..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-hornet-ub.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * ALFA NETWORK Hornet-UB board support - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define HORNET_UB_GPIO_LED_WLAN 0 -#define HORNET_UB_GPIO_LED_USB 1 -#define HORNET_UB_GPIO_LED_LAN 13 -#define HORNET_UB_GPIO_LED_WAN 17 -#define HORNET_UB_GPIO_LED_WPS 27 -#define HORNET_UB_GPIO_EXT_LNA 28 - -#define HORNET_UB_GPIO_BTN_RESET 12 -#define HORNET_UB_GPIO_BTN_WPS 11 - -#define HORNET_UB_GPIO_USB_POWER 26 - -#define HORNET_UB_KEYS_POLL_INTERVAL 20 /* msecs */ -#define HORNET_UB_KEYS_DEBOUNCE_INTERVAL (3 * HORNET_UB_KEYS_POLL_INTERVAL) - -#define HORNET_UB_MAC0_OFFSET 0x0000 -#define HORNET_UB_MAC1_OFFSET 0x0006 -#define HORNET_UB_CALDATA_OFFSET 0x1000 - -static struct gpio_led hornet_ub_leds_gpio[] __initdata = { - { - .name = "alfa:blue:lan", - .gpio = HORNET_UB_GPIO_LED_LAN, - .active_low = 0, - }, - { - .name = "alfa:blue:usb", - .gpio = HORNET_UB_GPIO_LED_USB, - .active_low = 0, - }, - { - .name = "alfa:blue:wan", - .gpio = HORNET_UB_GPIO_LED_WAN, - .active_low = 1, - }, - { - .name = "alfa:blue:wlan", - .gpio = HORNET_UB_GPIO_LED_WLAN, - .active_low = 0, - }, - { - .name = "alfa:blue:wps", - .gpio = HORNET_UB_GPIO_LED_WPS, - .active_low = 1, - }, -}; - -static struct gpio_keys_button hornet_ub_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL, - .gpio = HORNET_UB_GPIO_BTN_WPS, - .active_low = 0, - }, - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL, - .gpio = HORNET_UB_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init hornet_ub_gpio_setup(void) -{ - u32 t; - - ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); - t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN; - ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t); - - gpio_request_one(HORNET_UB_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - gpio_request_one(HORNET_UB_GPIO_EXT_LNA, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "external LNA0"); - -} - -static void __init hornet_ub_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - hornet_ub_gpio_setup(); - - ath79_register_m25p80(NULL); - ath79_register_leds_gpio(-1, ARRAY_SIZE(hornet_ub_leds_gpio), - hornet_ub_leds_gpio); - ath79_register_gpio_keys_polled(-1, HORNET_UB_KEYS_POLL_INTERVAL, - ARRAY_SIZE(hornet_ub_gpio_keys), - hornet_ub_gpio_keys); - - ath79_init_mac(ath79_eth1_data.mac_addr, - art + HORNET_UB_MAC0_OFFSET, 0); - ath79_init_mac(ath79_eth0_data.mac_addr, - art + HORNET_UB_MAC1_OFFSET, 0); - - ath79_register_mdio(0, 0x0); - - ath79_register_eth(1); - ath79_register_eth(0); - - ath79_register_wmac(art + HORNET_UB_CALDATA_OFFSET, NULL); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_HORNET_UB, "HORNET-UB", "ALFA NETWORK Hornet-UB", - hornet_ub_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ja76pf.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ja76pf.c deleted file mode 100644 index d1fe0f8a26..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ja76pf.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * jjPlus JA76PF board support - */ - -#include <linux/i2c.h> -#include <linux/i2c-gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -#define JA76PF_KEYS_POLL_INTERVAL 20 /* msecs */ -#define JA76PF_KEYS_DEBOUNCE_INTERVAL (3 * JA76PF_KEYS_POLL_INTERVAL) - -#define JA76PF_GPIO_I2C_SCL 0 -#define JA76PF_GPIO_I2C_SDA 1 -#define JA76PF_GPIO_LED_1 5 -#define JA76PF_GPIO_LED_2 4 -#define JA76PF_GPIO_LED_3 3 -#define JA76PF_GPIO_BTN_RESET 11 - -static struct gpio_led ja76pf_leds_gpio[] __initdata = { - { - .name = "jjplus:green:led1", - .gpio = JA76PF_GPIO_LED_1, - .active_low = 1, - }, { - .name = "jjplus:green:led2", - .gpio = JA76PF_GPIO_LED_2, - .active_low = 1, - }, { - .name = "jjplus:green:led3", - .gpio = JA76PF_GPIO_LED_3, - .active_low = 1, - } -}; - -static struct gpio_keys_button ja76pf_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL, - .gpio = JA76PF_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct i2c_gpio_platform_data ja76pf_i2c_gpio_data = { - .sda_pin = JA76PF_GPIO_I2C_SDA, - .scl_pin = JA76PF_GPIO_I2C_SCL, -}; - -static struct platform_device ja76pf_i2c_gpio_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &ja76pf_i2c_gpio_data, - } -}; - -static const char *ja76pf_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data ja76pf_flash_data = { - .part_probes = ja76pf_part_probes, -}; - -#define JA76PF_WAN_PHYMASK (1 << 4) -#define JA76PF_LAN_PHYMASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 < 3)) -#define JA76PF_MDIO_PHYMASK (JA76PF_LAN_PHYMASK | JA76PF_WAN_PHYMASK) - -static void __init ja76pf_init(void) -{ - ath79_register_m25p80(&ja76pf_flash_data); - - ath79_register_mdio(0, ~JA76PF_MDIO_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = JA76PF_LAN_PHYMASK; - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = JA76PF_WAN_PHYMASK; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - ath79_register_eth(1); - - platform_device_register(&ja76pf_i2c_gpio_device); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ja76pf_leds_gpio), - ja76pf_leds_gpio); - - ath79_register_gpio_keys_polled(-1, JA76PF_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ja76pf_gpio_keys), - ja76pf_gpio_keys); - - ath79_register_usb(); - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_JA76PF, "JA76PF", "jjPlus JA76PF", ja76pf_init); - -#define JA76PF2_GPIO_LED_D2 5 -#define JA76PF2_GPIO_LED_D3 4 -#define JA76PF2_GPIO_LED_D4 3 -#define JA76PF2_GPIO_BTN_RESET 7 -#define JA76PF2_GPIO_BTN_WPS 8 - -static struct gpio_led ja76pf2_leds_gpio[] __initdata = { - { - .name = "jjplus:green:led1", - .gpio = JA76PF2_GPIO_LED_D2, - .active_low = 1, - }, { - .name = "jjplus:green:led2", - .gpio = JA76PF2_GPIO_LED_D3, - .active_low = 0, - }, { - .name = "jjplus:green:led3", - .gpio = JA76PF2_GPIO_LED_D4, - .active_low = 0, - } -}; - -static struct gpio_keys_button ja76pf2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL, - .gpio = JA76PF2_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL, - .gpio = JA76PF2_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - -#define JA76PF2_LAN_PHYMASK BIT(0) -#define JA76PF2_WAN_PHYMASK BIT(4) -#define JA76PF2_MDIO_PHYMASK (JA76PF2_LAN_PHYMASK | JA76PF2_WAN_PHYMASK) - -static void __init ja76pf2_init(void) -{ - ath79_register_m25p80(&ja76pf_flash_data); - - ath79_register_mdio(0, ~JA76PF2_MDIO_PHYMASK); - - /* MAC0 is connected to the CPU port of the AR8316 switch */ - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - - /* MAC1 is connected to the PHY4 of the AR8316 switch */ - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = BIT(4); - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ja76pf2_leds_gpio), - ja76pf2_leds_gpio); - - ath79_register_gpio_keys_polled(-1, JA76PF_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ja76pf2_gpio_keys), - ja76pf2_gpio_keys); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_JA76PF2, "JA76PF2", "jjPlus JA76PF2", ja76pf2_init); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap003.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap003.c deleted file mode 100644 index a3c93ccd90..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap003.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * jjPlus JWAP003 board support - * - */ - -#include <linux/i2c.h> -#include <linux/i2c-gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-m25p80.h" -#include "dev-gpio-buttons.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -#define JWAP003_KEYS_POLL_INTERVAL 20 /* msecs */ -#define JWAP003_KEYS_DEBOUNCE_INTERVAL (3 * JWAP003_KEYS_POLL_INTERVAL) - -#define JWAP003_GPIO_WPS 11 -#define JWAP003_GPIO_I2C_SCL 0 -#define JWAP003_GPIO_I2C_SDA 1 - -static struct gpio_keys_button jwap003_gpio_keys[] __initdata = { - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = JWAP003_KEYS_DEBOUNCE_INTERVAL, - .gpio = JWAP003_GPIO_WPS, - .active_low = 1, - } -}; - -static struct i2c_gpio_platform_data jwap003_i2c_gpio_data = { - .sda_pin = JWAP003_GPIO_I2C_SDA, - .scl_pin = JWAP003_GPIO_I2C_SCL, -}; - -static struct platform_device jwap003_i2c_gpio_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &jwap003_i2c_gpio_data, - } -}; - -static const char *jwap003_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data jwap003_flash_data = { - .part_probes = jwap003_part_probes, -}; - -#define JWAP003_WAN_PHYMASK BIT(0) -#define JWAP003_LAN_PHYMASK BIT(4) - -static void __init jwap003_init(void) -{ - ath79_register_m25p80(&jwap003_flash_data); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.phy_mask = JWAP003_WAN_PHYMASK; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.has_ar8216 = 1; - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = JWAP003_LAN_PHYMASK; - ath79_eth1_data.speed = SPEED_100; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - ath79_register_eth(1); - - platform_device_register(&jwap003_i2c_gpio_device); - - ath79_register_usb(); - - ath79_register_gpio_keys_polled(-1, JWAP003_KEYS_POLL_INTERVAL, - ARRAY_SIZE(jwap003_gpio_keys), - jwap003_gpio_keys); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_JWAP003, "JWAP003", "jjPlus JWAP003", jwap003_init); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c deleted file mode 100644 index de24db4d4b..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * jjPlus JWAP230 board support - * - * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com> - * - * Based on mach-wpj558.c and mach-tl-wr1043nd-v2.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define JWAP230_GPIO_LED_LED1 23 -#define JWAP230_GPIO_LED_LED2 22 -#define JWAP230_GPIO_LED_LED3 21 - -#define JWAP230_MAC0_OFFSET 0x0 -#define JWAP230_MAC1_OFFSET 0x6 -#define JWAP230_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led jwap230_leds_gpio[] __initdata = { - { - .name = "jwap230:green:led1", - .gpio = JWAP230_GPIO_LED_LED1, - .active_low = 1, - }, - { - .name = "jwap230:green:led2", - .gpio = JWAP230_GPIO_LED_LED2, - .active_low = 1, - }, - { - .name = "jwap230:green:led3", - .gpio = JWAP230_GPIO_LED_LED3, - .active_low = 1, - } -}; - -static const struct ar8327_led_info jwap230_leds_qca8337[] = { - AR8327_LED_INFO(PHY0_0, HW, "jwap230:green:lan"), - AR8327_LED_INFO(PHY4_0, HW, "jwap230:green:wan"), -}; - -/* Blink rate: 1 Gbps -> 8 hz, 100 Mbs -> 4 Hz, 10 Mbps -> 2 Hz */ -static struct ar8327_led_cfg jwap230_qca8337_led_cfg = { - .led_ctrl0 = 0xcf37cf37, - .led_ctrl1 = 0xcf37cf37, - .led_ctrl2 = 0xcf37cf37, - .led_ctrl3 = 0x0, - .open_drain = true, -}; - -/* QCA8337 GMAC0 is connected with QCA9558 over RGMII */ -static struct ar8327_pad_cfg jwap230_qca8337_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, - .mac06_exchange_dis = true, -}; - -/* QCA8337 GMAC6 is connected with QCA9558 over SGMII */ -static struct ar8327_pad_cfg jwap230_qca8337_pad6_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0, -}; - -static struct ar8327_platform_data jwap230_qca8337_data = { - .pad0_cfg = &jwap230_qca8337_pad0_cfg, - .pad6_cfg = &jwap230_qca8337_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .port6_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &jwap230_qca8337_led_cfg, - .num_leds = ARRAY_SIZE(jwap230_leds_qca8337), - .leds = jwap230_leds_qca8337, -}; - -static struct mdio_board_info jwap230_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &jwap230_qca8337_data, - }, -}; - -static void __init jwap230_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(jwap230_leds_gpio), - jwap230_leds_gpio); - - mdiobus_register_board_info(jwap230_mdio0_info, - ARRAY_SIZE(jwap230_mdio0_info)); - ath79_register_mdio(0, 0x0); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - /* QCA9558 GMAC0 is connected to RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0xa6000000; - - ath79_init_mac(ath79_eth0_data.mac_addr, art + JWAP230_MAC0_OFFSET, 0); - ath79_register_eth(0); - - /* QCA9558 GMAC1 is connected to SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_pll_data.pll_1000 = 0x03000101; - - ath79_init_mac(ath79_eth1_data.mac_addr, art + JWAP230_MAC1_OFFSET, 0); - ath79_register_eth(1); - - ath79_register_wmac(art + JWAP230_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_pci(); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_JWAP230, "JWAP230", "jjPlus JWAP230", jwap230_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-koala.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-koala.c deleted file mode 100644 index 41254a6d7a..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-koala.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * OCEDO Koala board support - * Based on the MR1750 machine file - * - * Copyright (c) 2012 Qualcomm Atheros - * Copyright (c) 2012-2013 Marek Lindner <marek@open-mesh.com> - * Copyright (c) 2018 David Bauer <mail@david-bauer.net> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <linux/platform_data/phy-at803x.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define KOALA_GPIO_LED_POWER 22 -#define KOALA_GPIO_LED_WLAN_5G 13 -#define KOALA_GPIO_LED_WLAN_2G 23 -#define KOALA_GPIO_LED_WLAN_SYS 19 - -#define KOALA_GPIO_BTN_RESET 17 - -#define KOALA_KEYS_POLL_INTERVAL 20 /* msecs */ -#define KOALA_KEYS_DEBOUNCE_INTERVAL (3 * KOALA_KEYS_POLL_INTERVAL) - -#define KOALA_LAN_MAC_OFFSET 0 -#define KOALA_WIFI2G_MAC_OFFSET 0x06 -#define KOALA_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led koala_leds_gpio[] __initdata = { - { - .name = "koala:green:power", - .gpio = KOALA_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "koala:red:wlan58", - .gpio = KOALA_GPIO_LED_WLAN_5G, - .active_low = 1, - }, - { - .name = "koala:yellow:wlan2", - .gpio = KOALA_GPIO_LED_WLAN_2G, - .active_low = 1, - }, - { - .name = "koala:blue:sys", - .gpio = KOALA_GPIO_LED_WLAN_SYS, - .active_low = 1, - }, -}; - -static struct gpio_keys_button koala_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = KOALA_KEYS_DEBOUNCE_INTERVAL, - .gpio = KOALA_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct at803x_platform_data koala_at803x_data = { - .disable_smarteee = 1, - .enable_rgmii_rx_delay = 1, - .enable_rgmii_tx_delay = 0, - .fixup_rgmii_tx_delay = 1, -}; - -static struct mdio_board_info koala_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 5, - .platform_data = &koala_at803x_data, - }, -}; - -static void __init koala_setup_qca955x_eth_cfg(u32 mask, - unsigned int rxd, - unsigned int rxdv, - unsigned int txd, - unsigned int txe) -{ - void __iomem *base; - u32 t; - - base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); - - t = mask; - t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT; - t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT; - t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT; - t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT; - - __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - -static void __init koala_setup(void) -{ - u8 *art = (u8 *)KSEG1ADDR(0x1fff0000); - u8 mac[6]; - - ath79_eth0_pll_data.pll_1000 = 0xae000000; - ath79_eth0_pll_data.pll_100 = 0xa0000101; - ath79_eth0_pll_data.pll_10 = 0xa0001313; - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(koala_leds_gpio), - koala_leds_gpio); - ath79_register_gpio_keys_polled(-1, KOALA_KEYS_POLL_INTERVAL, - ARRAY_SIZE(koala_gpio_keys), - koala_gpio_keys); - - ath79_init_mac(mac, art + KOALA_WIFI2G_MAC_OFFSET, 0); - ath79_register_wmac(art + KOALA_WMAC_CALDATA_OFFSET, mac); - ath79_register_pci(); - - koala_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0); - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(koala_mdio0_info, - ARRAY_SIZE(koala_mdio0_info)); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + KOALA_LAN_MAC_OFFSET, 0); - - /* GMAC0 is connected to the RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(5); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_KOALA, "KOALA", "OCEDO Koala", koala_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-lan-turtle.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-lan-turtle.c deleted file mode 100644 index d2faa2c740..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-lan-turtle.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Hak5 LAN Turtle and Packet Squirrel boards support - * - * Copyright (C) 2018 Sebastian Kinne <seb@hak5.org> - * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define LAN_TURTLE_GPIO_BTN_RESET 11 -#define LAN_TURTLE_GPIO_LED_SYS 13 - -#define PACKET_SQUIRREL_GPIO_BTN_SW1 18 -#define PACKET_SQUIRREL_GPIO_BTN_SW2 20 -#define PACKET_SQUIRREL_GPIO_BTN_SW3 21 -#define PACKET_SQUIRREL_GPIO_BTN_SW4 24 -#define PACKET_SQUIRREL_GPIO_BTN_RESET 11 -#define PACKET_SQUIRREL_GPIO_LED_B 23 -#define PACKET_SQUIRREL_GPIO_LED_G 22 -#define PACKET_SQUIRREL_GPIO_LED_R 19 - -#define HAK5_KEYS_POLL_INTERVAL 20 /* msecs */ -#define HAK5_KEYS_DEBOUNCE_INTERVAL (3 * HAK5_KEYS_POLL_INTERVAL) - -static const char *hak5_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data hak5_flash_data = { - .part_probes = hak5_part_probes, -}; - -/* LAN Turtle */ -static struct gpio_led lan_turtle_leds_gpio[] __initdata = { - { - .name = "lan-turtle:orange:system", - .gpio = LAN_TURTLE_GPIO_LED_SYS, - .active_low = 1, - }, -}; - -static struct gpio_keys_button lan_turtle_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL, - .gpio = LAN_TURTLE_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -/* Packet Squirrel */ -static struct gpio_led packet_squirrel_leds_gpio[] __initdata = { - { - .name = "packet-squirrel:blue:system", - .gpio = PACKET_SQUIRREL_GPIO_LED_B, - .active_low = 1, - }, { - .name = "packet-squirrel:green:system", - .gpio = PACKET_SQUIRREL_GPIO_LED_G, - .active_low = 1, - }, { - .name = "packet-squirrel:red:system", - .gpio = PACKET_SQUIRREL_GPIO_LED_R, - .active_low = 1, - }, -}; - -static struct gpio_keys_button packet_squirrel_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL, - .gpio = PACKET_SQUIRREL_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "sw1", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL, - .gpio = PACKET_SQUIRREL_GPIO_BTN_SW1, - .active_low = 1, - }, { - .desc = "sw2", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL, - .gpio = PACKET_SQUIRREL_GPIO_BTN_SW2, - .active_low = 1, - }, { - .desc = "sw3", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL, - .gpio = PACKET_SQUIRREL_GPIO_BTN_SW3, - .active_low = 1, - }, { - .desc = "sw4", - .type = EV_KEY, - .code = BTN_3, - .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL, - .gpio = PACKET_SQUIRREL_GPIO_BTN_SW4, - .active_low = 1, - }, -}; - -static void __init hak5_common_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - - ath79_register_m25p80(&hak5_flash_data); - - ath79_register_mdio(0, 0x0); - - ath79_switch_data.phy_poll_mask = 0xfe; - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_register_eth(0); - - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); - ath79_register_eth(1); - - ath79_register_usb(); - - /* GPIO11/12 */ - ath79_gpio_function_disable(AR933X_GPIO_FUNC_UART_RTS_CTS_EN); -} - -static void __init lan_turtle_setup(void) -{ - hak5_common_setup(); - - /* GPIO13 */ - ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(lan_turtle_leds_gpio), - lan_turtle_leds_gpio); - - ath79_register_gpio_keys_polled(-1, HAK5_KEYS_POLL_INTERVAL, - ARRAY_SIZE(lan_turtle_gpio_keys), - lan_turtle_gpio_keys); -} - -static void __init packet_squirrel_setup(void) -{ - hak5_common_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(packet_squirrel_leds_gpio), - packet_squirrel_leds_gpio); - - ath79_register_gpio_keys_polled(-1, HAK5_KEYS_POLL_INTERVAL, - ARRAY_SIZE(packet_squirrel_gpio_keys), - packet_squirrel_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_LAN_TURTLE, "LAN-TURTLE", - "Hak5 LAN Turtle", lan_turtle_setup); - -MIPS_MACHINE(ATH79_MACH_PACKET_SQUIRREL, "PACKET-SQUIRREL", - "Hak5 Packet Squirrel", packet_squirrel_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-lima.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-lima.c deleted file mode 100644 index 9867429684..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-lima.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * 8devices Lima board support - * - * Copyright (C) 2016 Mantas Pucka <mantas@8devices.com> - * Copyright (C) 2017 Karol Dudek <karoiz@sli.pl> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define LIMA_GPIO_BTN_1_DEFAULT 16 -#define LIMA_KEYS_POLL_INTERVAL 20 /* msecs */ -#define LIMA_KEYS_DEBOUNCE_INTERVAL (3 * LIMA_KEYS_POLL_INTERVAL) - -#define LIMA_ETH_PHYS (BIT(0) | BIT(1)) - -#define LIMA_MAC0_OFFSET 0x0000 -#define LIMA_MAC1_OFFSET 0x0006 - -#define LIMA_CALDATA_OFFSET 0x1000 - -static struct gpio_keys_button lima_gpio_keys[] __initdata = { - { - .desc = "button1", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = LIMA_KEYS_DEBOUNCE_INTERVAL, - .gpio = LIMA_GPIO_BTN_1_DEFAULT, - .active_low = 1, - } -}; - -static void __init lima_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1f080000); - - ath79_register_m25p80(NULL); - - ath79_register_gpio_keys_polled(-1, LIMA_KEYS_POLL_INTERVAL, - ARRAY_SIZE(lima_gpio_keys), - lima_gpio_keys); - - ath79_setup_ar933x_phy4_switch(true, true); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + LIMA_MAC0_OFFSET, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, art + LIMA_MAC1_OFFSET, 0); - - ath79_register_mdio(0, ~LIMA_ETH_PHYS); - - ath79_switch_data.phy4_mii_en = 1; - - ath79_switch_data.phy_poll_mask |= BIT(0); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.phy_mask = BIT(1); - ath79_register_eth(1); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.phy_mask = BIT(0); - ath79_register_eth(0); - - ath79_register_wmac(art + LIMA_CALDATA_OFFSET, NULL); - ath79_register_usb(); - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_LIMA, "LIMA", "8devices Lima board", lima_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mc-mac1200r.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mc-mac1200r.c deleted file mode 100644 index 70051cff47..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mc-mac1200r.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * MERCURY MAC1200R board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2013 Gui Iribarren <gui@altermundi.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define MAC1200R_GPIO_LED_WLAN2G 13 -#define MAC1200R_GPIO_LED_WLAN5G 17 -#define MAC1200R_GPIO_LED_SYSTEM 14 -#define MAC1200R_GPIO_LED_WPS 11 -#define MAC1200R_GPIO_LED_WAN 12 -#define MAC1200R_GPIO_LED_LAN1 15 -#define MAC1200R_GPIO_LED_LAN2 21 -#define MAC1200R_GPIO_LED_LAN3 22 -#define MAC1200R_GPIO_LED_LAN4 20 - -#define MAC1200R_GPIO_BTN_WPS 16 - -#define MAC1200R_KEYS_POLL_INTERVAL 20 /* msecs */ -#define MAC1200R_KEYS_DEBOUNCE_INTERVAL (3 * MAC1200R_KEYS_POLL_INTERVAL) - -#define MAC1200R_MAC0_OFFSET 0 -#define MAC1200R_MAC1_OFFSET 6 -#define MAC1200R_WMAC_CALDATA_OFFSET 0x1000 -#define MAC1200R_PCIE_CALDATA_OFFSET 0x5000 - -static const char *mac1200r_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data mac1200r_flash_data = { - .part_probes = mac1200r_part_probes, -}; - -static struct gpio_led mac1200r_leds_gpio[] __initdata = { - { - .name = "mercury:green:wps", - .gpio = MAC1200R_GPIO_LED_WPS, - .active_low = 1, - }, - { - .name = "mercury:green:system", - .gpio = MAC1200R_GPIO_LED_SYSTEM, - .active_low = 1, - }, - { - .name = "mercury:green:wlan2g", - .gpio = MAC1200R_GPIO_LED_WLAN2G, - .active_low = 1, - }, - { - .name = "mercury:green:wlan5g", - .gpio = MAC1200R_GPIO_LED_WLAN5G, - .active_low = 1, - }, -}; - -static struct gpio_keys_button mac1200r_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = MAC1200R_KEYS_DEBOUNCE_INTERVAL, - .gpio = MAC1200R_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - - -static void __init mac1200r_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 tmpmac[ETH_ALEN]; - - ath79_register_m25p80(&mac1200r_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(mac1200r_leds_gpio), - mac1200r_leds_gpio); - - ath79_register_gpio_keys_polled(-1, MAC1200R_KEYS_POLL_INTERVAL, - ARRAY_SIZE(mac1200r_gpio_keys), - mac1200r_gpio_keys); - - ath79_init_mac(tmpmac, mac, 0); - ath79_wmac_disable_5ghz(); - ath79_register_wmac(art + MAC1200R_WMAC_CALDATA_OFFSET, tmpmac); - - ath79_init_mac(tmpmac, mac, 1); - ap91_pci_init(art + MAC1200R_PCIE_CALDATA_OFFSET, tmpmac); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); - - ath79_register_mdio(1, 0x0); - - /* LAN */ - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); - - /* GMAC1 is connected to the internal switch */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - - ath79_register_eth(1); - - /* WAN */ - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 2); - - /* GMAC0 is connected to the PHY4 of the internal switch */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(4); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - - ath79_register_eth(0); - - ath79_gpio_output_select(MAC1200R_GPIO_LED_LAN1, - AR934X_GPIO_OUT_LED_LINK3); - ath79_gpio_output_select(MAC1200R_GPIO_LED_LAN2, - AR934X_GPIO_OUT_LED_LINK2); - ath79_gpio_output_select(MAC1200R_GPIO_LED_LAN3, - AR934X_GPIO_OUT_LED_LINK1); - ath79_gpio_output_select(MAC1200R_GPIO_LED_LAN4, - AR934X_GPIO_OUT_LED_LINK0); - ath79_gpio_output_select(MAC1200R_GPIO_LED_WAN, - AR934X_GPIO_OUT_LED_LINK4); -} - -MIPS_MACHINE(ATH79_MACH_MC_MAC1200R, "MC-MAC1200R", - "MERCURY MAC1200R", - mac1200r_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr12.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr12.c deleted file mode 100644 index 5a337e5c9f..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr12.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * Cisco Meraki MR12 board support - * - * Copyright (C) 2014-2015 Chris Blake <chrisrblake93@gmail.com> - * - * Based on Atheros AP96 board support configuration - * - * Copyright (C) 2009 Marco Porsch - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2010 Atheros Communications - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/delay.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -#define MR12_GPIO_LED_W4_GREEN 14 -#define MR12_GPIO_LED_W3_GREEN 13 -#define MR12_GPIO_LED_W2_GREEN 12 -#define MR12_GPIO_LED_W1_GREEN 11 - -#define MR12_GPIO_LED_WAN 15 - -#define MR12_GPIO_LED_POWER_ORANGE 16 -#define MR12_GPIO_LED_POWER_GREEN 17 - -#define MR12_GPIO_BTN_RESET 8 -#define MR12_KEYS_POLL_INTERVAL 20 /* msecs */ -#define MR12_KEYS_DEBOUNCE_INTERVAL (3 * MR12_KEYS_POLL_INTERVAL) - -#define MR12_WAN_PHYMASK BIT(4) - -#define MR12_CALDATA0_OFFSET 0x21000 - -static struct gpio_led MR12_leds_gpio[] __initdata = { - { - .name = "mr12:green:wan", - .gpio = MR12_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "mr12:orange:power", - .gpio = MR12_GPIO_LED_POWER_ORANGE, - .active_low = 1, - }, { - .name = "mr12:green:power", - .gpio = MR12_GPIO_LED_POWER_GREEN, - .active_low = 1, - }, { - .name = "mr12:green:wifi4", - .gpio = MR12_GPIO_LED_W4_GREEN, - .active_low = 1, - }, { - .name = "mr12:green:wifi3", - .gpio = MR12_GPIO_LED_W3_GREEN, - .active_low = 1, - }, { - .name = "mr12:green:wifi2", - .gpio = MR12_GPIO_LED_W2_GREEN, - .active_low = 1, - }, { - .name = "mr12:green:wifi1", - .gpio = MR12_GPIO_LED_W1_GREEN, - .active_low = 1, - } -}; - -static struct gpio_keys_button MR12_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = MR12_KEYS_DEBOUNCE_INTERVAL, - .gpio = MR12_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init MR12_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0xbffd0000); - u8 wlan_mac[ETH_ALEN]; - - ath79_register_mdio(0,0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = MR12_WAN_PHYMASK; - ath79_register_eth(0); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(MR12_leds_gpio), - MR12_leds_gpio); - ath79_register_gpio_keys_polled(-1, MR12_KEYS_POLL_INTERVAL, - ARRAY_SIZE(MR12_gpio_keys), - MR12_gpio_keys); - - ath79_init_mac(wlan_mac, mac, 1); - ap91_pci_init(mac + MR12_CALDATA0_OFFSET, wlan_mac); -} - -MIPS_MACHINE(ATH79_MACH_MR12, "MR12", "Meraki MR12", MR12_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr16.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr16.c deleted file mode 100644 index 9da21eab5a..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr16.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * Cisco Meraki MR16 board support - * - * Copyright (C) 2015 Chris Blake <chrisrblake93@gmail.com> - * - * Based on Atheros AP96 board support configuration - * - * Copyright (C) 2009 Marco Porsch - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2010 Atheros Communications - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/delay.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -#define MR16_GPIO_LED_W4_GREEN 3 -#define MR16_GPIO_LED_W3_GREEN 2 -#define MR16_GPIO_LED_W2_GREEN 1 -#define MR16_GPIO_LED_W1_GREEN 0 - -#define MR16_GPIO_LED_WAN 4 - -#define MR16_GPIO_LED_POWER_ORANGE 5 -#define MR16_GPIO_LED_POWER_GREEN 6 - -#define MR16_GPIO_BTN_RESET 7 -#define MR16_KEYS_POLL_INTERVAL 20 /* msecs */ -#define MR16_KEYS_DEBOUNCE_INTERVAL (3 * MR16_KEYS_POLL_INTERVAL) - -#define MR16_WAN_PHYMASK BIT(0) - -#define MR16_CALDATA0_OFFSET 0x21000 -#define MR16_CALDATA1_OFFSET 0x25000 - -static struct gpio_led MR16_leds_gpio[] __initdata = { - { - .name = "mr16:green:wan", - .gpio = MR16_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "mr16:orange:power", - .gpio = MR16_GPIO_LED_POWER_ORANGE, - .active_low = 1, - }, { - .name = "mr16:green:power", - .gpio = MR16_GPIO_LED_POWER_GREEN, - .active_low = 1, - }, { - .name = "mr16:green:wifi4", - .gpio = MR16_GPIO_LED_W4_GREEN, - .active_low = 1, - }, { - .name = "mr16:green:wifi3", - .gpio = MR16_GPIO_LED_W3_GREEN, - .active_low = 1, - }, { - .name = "mr16:green:wifi2", - .gpio = MR16_GPIO_LED_W2_GREEN, - .active_low = 1, - }, { - .name = "mr16:green:wifi1", - .gpio = MR16_GPIO_LED_W1_GREEN, - .active_low = 1, - } -}; - -static struct gpio_keys_button MR16_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = MR16_KEYS_DEBOUNCE_INTERVAL, - .gpio = MR16_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init MR16_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0xbffd0000); - u8 wlan0_mac[ETH_ALEN]; - u8 wlan1_mac[ETH_ALEN]; - - ath79_register_mdio(0,0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = MR16_WAN_PHYMASK; - ath79_register_eth(0); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(MR16_leds_gpio), - MR16_leds_gpio); - ath79_register_gpio_keys_polled(-1, MR16_KEYS_POLL_INTERVAL, - ARRAY_SIZE(MR16_gpio_keys), - MR16_gpio_keys); - - ath79_init_mac(wlan0_mac, mac, 1); - ath79_init_mac(wlan1_mac, mac, 2); - ap94_pci_init(mac + MR16_CALDATA0_OFFSET, wlan0_mac, - mac + MR16_CALDATA1_OFFSET, wlan1_mac); -} - -MIPS_MACHINE(ATH79_MACH_MR16, "MR16", "Meraki MR16", MR16_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c deleted file mode 100644 index 987ed4bd5d..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * MR1750 board support - * - * Copyright (c) 2012 Qualcomm Atheros - * Copyright (c) 2012-2013 Marek Lindner <marek@open-mesh.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <linux/platform_data/phy-at803x.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define MR1750_GPIO_LED_LAN 12 -#define MR1750_GPIO_LED_WLAN_2G 13 -#define MR1750_GPIO_LED_STATUS_GREEN 19 -#define MR1750_GPIO_LED_STATUS_RED 21 -#define MR1750_GPIO_LED_POWER 22 -#define MR1750_GPIO_LED_WLAN_5G 23 - -#define MR1750_GPIO_BTN_RESET 17 - -#define MR1750_KEYS_POLL_INTERVAL 20 /* msecs */ -#define MR1750_KEYS_DEBOUNCE_INTERVAL (3 * MR1750_KEYS_POLL_INTERVAL) - -#define MR1750_MAC0_OFFSET 0 -#define MR1750_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led mr1750_leds_gpio[] __initdata = { - { - .name = "mr1750:blue:power", - .gpio = MR1750_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "mr1750:blue:wan", - .gpio = MR1750_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "mr1750:blue:wlan24", - .gpio = MR1750_GPIO_LED_WLAN_2G, - .active_low = 1, - }, - { - .name = "mr1750:blue:wlan58", - .gpio = MR1750_GPIO_LED_WLAN_5G, - .active_low = 1, - }, - { - .name = "mr1750:green:status", - .gpio = MR1750_GPIO_LED_STATUS_GREEN, - .active_low = 1, - }, - { - .name = "mr1750:red:status", - .gpio = MR1750_GPIO_LED_STATUS_RED, - .active_low = 1, - }, -}; - -static struct gpio_keys_button mr1750_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = MR1750_KEYS_DEBOUNCE_INTERVAL, - .gpio = MR1750_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct at803x_platform_data mr1750_at803x_data = { - .disable_smarteee = 1, - .enable_rgmii_rx_delay = 1, - .enable_rgmii_tx_delay = 0, - .fixup_rgmii_tx_delay = 1, -}; - -static struct mdio_board_info mr1750_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 5, - .platform_data = &mr1750_at803x_data, - }, -}; - -static void __init mr1750_setup_qca955x_eth_cfg(u32 mask, - unsigned int rxd, - unsigned int rxdv, - unsigned int txd, - unsigned int txe) -{ - void __iomem *base; - u32 t; - - base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); - - t = mask; - t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT; - t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT; - t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT; - t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT; - - __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - -static void __init mr1750_setup(void) -{ - u8 *art = (u8 *)KSEG1ADDR(0x1fff0000); - u8 mac[6]; - - ath79_eth0_pll_data.pll_1000 = 0xae000000; - ath79_eth0_pll_data.pll_100 = 0xa0000101; - ath79_eth0_pll_data.pll_10 = 0xa0001313; - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(mr1750_leds_gpio), - mr1750_leds_gpio); - ath79_register_gpio_keys_polled(-1, MR1750_KEYS_POLL_INTERVAL, - ARRAY_SIZE(mr1750_gpio_keys), - mr1750_gpio_keys); - - ath79_init_mac(mac, art + MR1750_MAC0_OFFSET, 1); - ath79_register_wmac(art + MR1750_WMAC_CALDATA_OFFSET, mac); - ath79_register_pci(); - - mr1750_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0); - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(mr1750_mdio0_info, - ARRAY_SIZE(mr1750_mdio0_info)); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + MR1750_MAC0_OFFSET, 0); - - /* GMAC0 is connected to the RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(5); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_MR1750, "MR1750", "OpenMesh MR1750", mr1750_setup); -MIPS_MACHINE(ATH79_MACH_MR1750V2, "MR1750v2", "OpenMesh MR1750v2", mr1750_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr18.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr18.c deleted file mode 100644 index 2d2fb6e84c..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr18.c +++ /dev/null @@ -1,286 +0,0 @@ -/* - * Cisco Meraki MR18 board support - * - * Copyright (C) 2015 Chris Blake <chrisrblake93@gmail.com> - * Copyright (C) 2015 Christian Lamparter <chunkeey@googlemail.com> - * Copyright (C) 2015 Thomas Hebb <tommyhebb@gmail.com> - * - * Based on Cisco Meraki GPL Release r23-20150601 MR18 Device Config - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/platform/ar934x_nfc.h> -#include <linux/platform_data/phy-at803x.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include <linux/leds-nu801.h> -#include <linux/pci.h> - -#include "common.h" -#include "dev-eth.h" -#include "pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-nfc.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define MR18_GPIO_LED_POWER_WHITE 18 -#define MR18_GPIO_LED_POWER_ORANGE 21 - -#define MR18_GPIO_BTN_RESET 17 -#define MR18_KEYS_POLL_INTERVAL 20 /* msecs */ -#define MR18_KEYS_DEBOUNCE_INTERVAL (3 * MR18_KEYS_POLL_INTERVAL) - -#define MR18_WAN_PHYADDR 3 - -/* used for eth calibration */ -#define MR18_OTP_BASE (AR71XX_APB_BASE + 0x130000) -#define MR18_OTP_SIZE (0x2000) /* just a guess */ -#define MR18_OTP_MEM_0_REG (0x0000) -#define MR18_OTP_INTF2_REG (0x1008) -#define MR18_OTP_STATUS0_REG (0x1018) -#define MR18_OTP_STATUS0_EFUSE_VALID BIT(2) - -#define MR18_OTP_STATUS1_REG (0x101c) -#define MR18_OTP_LDO_CTRL_REG (0x1024) -#define MR18_OTP_LDO_STATUS_REG (0x102c) -#define MR18_OTP_LDO_STATUS_POWER_ON BIT(0) - -static struct gpio_led MR18_leds_gpio[] __initdata = { - { - .name = "mr18:white:power", - .gpio = MR18_GPIO_LED_POWER_WHITE, - .active_low = 1, - }, { - .name = "mr18:orange:power", - .gpio = MR18_GPIO_LED_POWER_ORANGE, - .active_low = 0, - }, -}; - -static struct gpio_keys_button MR18_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = MR18_KEYS_DEBOUNCE_INTERVAL, - .gpio = MR18_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct led_nu801_template tricolor_led_template = { - .device_name = "mr18", - .name = "tricolor", - .num_leds = 1, - .cki = 11, - .sdi = 12, - .lei = -1, - .ndelay = 500, - .init_brightness = { - LED_OFF, - LED_OFF, - LED_OFF, - }, - .default_trigger = "none", - .led_colors = { "red", "green", "blue" }, -}; - -static struct led_nu801_platform_data tricolor_led_data = { - .num_controllers = 1, - .template = &tricolor_led_template, -}; - -static struct platform_device tricolor_leds = { - .name = "leds-nu801", - .id = -1, - .dev.platform_data = &tricolor_led_data, -}; - -static int mr18_extract_sgmii_res_cal(void) -{ - void __iomem *base; - unsigned int reversed_sgmii_value; - - unsigned int otp_value, otp_per_val, rbias_per, read_data; - unsigned int rbias_pos_or_neg; - unsigned int sgmii_res_cal_value; - int res_cal_val; - - base = ioremap_nocache(MR18_OTP_BASE, MR18_OTP_SIZE); - if (!base) - return -EIO; - - __raw_writel(0x7d, base + MR18_OTP_INTF2_REG); - __raw_writel(0x00, base + MR18_OTP_LDO_CTRL_REG); - - while (__raw_readl(base + MR18_OTP_LDO_STATUS_REG) & - MR18_OTP_LDO_STATUS_POWER_ON); - - __raw_readl(base + MR18_OTP_MEM_0_REG + 4); - - while (!(__raw_readl(base + MR18_OTP_STATUS0_REG) & - MR18_OTP_STATUS0_EFUSE_VALID)); - - read_data = __raw_readl(base + MR18_OTP_STATUS1_REG); - - iounmap(base); - - if (!(read_data & 0x1fff)) - return -ENODEV; - - if (read_data & 0x00001000) - otp_value = (read_data & 0xfc0) >> 6; - else - otp_value = read_data & 0x3f; - - if (otp_value > 31) { - otp_per_val = 63 - otp_value; - rbias_pos_or_neg = 1; - } else { - otp_per_val = otp_value; - rbias_pos_or_neg = 0; - } - - rbias_per = otp_per_val * 15; - - if (rbias_pos_or_neg == 1) - res_cal_val = (rbias_per + 34) / 21; - else if (rbias_per > 34) - res_cal_val = -((rbias_per - 34) / 21); - else - res_cal_val = (34 - rbias_per) / 21; - - sgmii_res_cal_value = (8 + res_cal_val) & 0xf; - - reversed_sgmii_value = (sgmii_res_cal_value & 8) >> 3; - reversed_sgmii_value |= (sgmii_res_cal_value & 4) >> 1; - reversed_sgmii_value |= (sgmii_res_cal_value & 2) << 1; - reversed_sgmii_value |= (sgmii_res_cal_value & 1) << 3; - printk(KERN_INFO "SGMII cal value = 0x%x\n", reversed_sgmii_value); - return reversed_sgmii_value; -} - -static void mr18_setup_qca955x_eth_serdes_cal(unsigned int sgmii_value) -{ - void __iomem *ethbase, *pllbase; - u32 t; - - ethbase = ioremap_nocache(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); - pllbase = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE); - - /* To Check the locking of the SGMII PLL */ - t = __raw_readl(ethbase + QCA955X_GMAC_REG_SGMII_SERDES); - t &= ~(QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK << - QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT); - t |= (sgmii_value & QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK) << - QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT; - __raw_writel(t, ethbase + QCA955X_GMAC_REG_SGMII_SERDES); - - __raw_writel(QCA955X_PLL_ETH_SGMII_SERDES_LOCK_DETECT | - QCA955X_PLL_ETH_SGMII_SERDES_PLL_REFCLK | - QCA955X_PLL_ETH_SGMII_SERDES_EN_PLL, - pllbase + QCA955X_PLL_ETH_SGMII_SERDES_REG); - - ath79_device_reset_clear(QCA955X_RESET_SGMII_ANALOG); - ath79_device_reset_clear(QCA955X_RESET_SGMII); - - while (!(__raw_readl(ethbase + QCA955X_GMAC_REG_SGMII_SERDES) & - QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS)); - - iounmap(ethbase); - iounmap(pllbase); -} - -static struct ath9k_platform_data pci_main_wifi_data = { - .led_pin = -1, -}; -static struct ath9k_platform_data pci_scan_wifi_data = { - .led_pin = -1, -}; - -static int mr18_dual_pci_plat_dev_init(struct pci_dev *dev) -{ - /* The PCIE devices are attached to different busses but they - * both share the same slot number. Checking the PCI_SLOT vals - * does not work. - */ - switch (dev->bus->number) { - case 0: - dev->dev.platform_data = &pci_main_wifi_data; - break; - case 1: - dev->dev.platform_data = &pci_scan_wifi_data; - break; - } - - return 0; -} - -static void __init mr18_setup(void) -{ - int res; - - /* NAND */ - ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_SOFT_BCH); - ath79_register_nfc(); - - /* even though, the PHY is connected via RGMII, - * the SGMII/SERDES PLLs need to be calibrated and locked. - * Or else, the PHY won't be working for this platfrom. - * - * Figuring this out took such a long time, that we want to - * point this quirk out, before someone wants to remove it. - */ - res = mr18_extract_sgmii_res_cal(); - if (res >= 0) { - /* Setup SoC Eth Config */ - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN | - (3 << QCA955X_ETH_CFG_RXD_DELAY_SHIFT) | - (3 << QCA955X_ETH_CFG_RDV_DELAY_SHIFT)); - - /* MDIO Interface */ - ath79_register_mdio(0, 0x0); - - mr18_setup_qca955x_eth_serdes_cal(res); - - /* GMAC0 is connected to an Atheros AR8035-A */ - ath79_init_mac(ath79_eth0_data.mac_addr, NULL, 0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(MR18_WAN_PHYADDR); - ath79_eth0_pll_data.pll_1000 = 0xa6000000; - ath79_eth0_pll_data.pll_100 = 0xa0000101; - ath79_eth0_pll_data.pll_10 = 0x80001313; - ath79_register_eth(0); - } else { - printk(KERN_ERR "failed to read EFUSE for ethernet cal\n"); - } - - /* LEDs and Buttons */ - platform_device_register(&tricolor_leds); - ath79_register_leds_gpio(-1, ARRAY_SIZE(MR18_leds_gpio), - MR18_leds_gpio); - ath79_register_gpio_keys_polled(-1, MR18_KEYS_POLL_INTERVAL, - ARRAY_SIZE(MR18_gpio_keys), - MR18_gpio_keys); - - /* Clear RTC reset (Needed by SoC WiFi) */ - ath79_device_reset_clear(QCA955X_RESET_RTC); - - /* WiFi */ - ath79_register_wmac_simple(); - - pci_main_wifi_data.eeprom_name = "pci_wmac0.eeprom"; - pci_scan_wifi_data.eeprom_name = "pci_wmac1.eeprom"; - ath79_pci_set_plat_dev_init(mr18_dual_pci_plat_dev_init); - ath79_register_pci(); -} -MIPS_MACHINE(ATH79_MACH_MR18, "MR18", "Meraki MR18", mr18_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c deleted file mode 100644 index 701330cebd..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * OpenMesh OM2P board support - * - * Copyright (C) 2012 Marek Lindner <marek@open-mesh.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define MR600_GPIO_LED_WLAN58 12 -#define MR600_GPIO_LED_WPS 13 -#define MR600_GPIO_LED_POWER 14 - -#define MR600V2_GPIO_LED_WLAN58_RED 12 -#define MR600V2_GPIO_LED_WPS 13 -#define MR600V2_GPIO_LED_POWER 14 -#define MR600V2_GPIO_LED_WLAN24_GREEN 18 -#define MR600V2_GPIO_LED_WLAN24_YELLOW 19 -#define MR600V2_GPIO_LED_WLAN24_RED 20 -#define MR600V2_GPIO_LED_WLAN58_GREEN 21 -#define MR600V2_GPIO_LED_WLAN58_YELLOW 22 - -#define MR600_GPIO_BTN_RESET 17 - -#define MR600_KEYS_POLL_INTERVAL 20 /* msecs */ -#define MR600_KEYS_DEBOUNCE_INTERVAL (3 * MR600_KEYS_POLL_INTERVAL) - -#define MR600_MAC_OFFSET 0 -#define MR600_WMAC_CALDATA_OFFSET 0x1000 -#define MR600_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led mr600_leds_gpio[] __initdata = { - { - .name = "mr600:orange:power", - .gpio = MR600_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "mr600:blue:wps", - .gpio = MR600_GPIO_LED_WPS, - .active_low = 1, - }, - { - .name = "mr600:green:wlan58", - .gpio = MR600_GPIO_LED_WLAN58, - .active_low = 1, - }, -}; - -static struct gpio_led mr600v2_leds_gpio[] __initdata = { - { - .name = "mr600:blue:power", - .gpio = MR600V2_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "mr600:blue:wps", - .gpio = MR600V2_GPIO_LED_WPS, - .active_low = 1, - }, - { - .name = "mr600:red:wlan24", - .gpio = MR600V2_GPIO_LED_WLAN24_RED, - .active_low = 1, - }, - { - .name = "mr600:yellow:wlan24", - .gpio = MR600V2_GPIO_LED_WLAN24_YELLOW, - .active_low = 1, - }, - { - .name = "mr600:green:wlan24", - .gpio = MR600V2_GPIO_LED_WLAN24_GREEN, - .active_low = 1, - }, - { - .name = "mr600:red:wlan58", - .gpio = MR600V2_GPIO_LED_WLAN58_RED, - .active_low = 1, - }, - { - .name = "mr600:yellow:wlan58", - .gpio = MR600V2_GPIO_LED_WLAN58_YELLOW, - .active_low = 1, - }, - { - .name = "mr600:green:wlan58", - .gpio = MR600V2_GPIO_LED_WLAN58_GREEN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button mr600_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = MR600_KEYS_DEBOUNCE_INTERVAL, - .gpio = MR600_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static void __init mr600_base_setup(unsigned num_leds, struct gpio_led *leds) -{ - u8 *art = (u8 *)KSEG1ADDR(0x1fff0000); - u8 mac[6]; - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, num_leds, leds); - ath79_register_gpio_keys_polled(-1, MR600_KEYS_POLL_INTERVAL, - ARRAY_SIZE(mr600_gpio_keys), - mr600_gpio_keys); - - ath79_init_mac(mac, art + MR600_MAC_OFFSET, 1); - ath79_register_wmac(art + MR600_WMAC_CALDATA_OFFSET, mac); - - ath79_init_mac(mac, art + MR600_MAC_OFFSET, 8); - ap91_pci_init(art + MR600_PCIE_CALDATA_OFFSET, mac); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | - AR934X_ETH_CFG_SW_ONLY_MODE); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + MR600_MAC_OFFSET, 0); - - /* GMAC0 is connected to an external PHY */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_register_eth(0); -} - -static void __init mr600_setup(void) -{ - mr600_base_setup(ARRAY_SIZE(mr600_leds_gpio), mr600_leds_gpio); - ap9x_pci_setup_wmac_led_pin(0, 0); -} - -MIPS_MACHINE(ATH79_MACH_MR600, "MR600", "OpenMesh MR600", mr600_setup); - -static void __init mr600v2_setup(void) -{ - mr600_base_setup(ARRAY_SIZE(mr600v2_leds_gpio), mr600v2_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_MR600V2, "MR600v2", "OpenMesh MR600v2", mr600v2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr900.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr900.c deleted file mode 100644 index 6b83c4cdf4..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr900.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * MR900 board support - * - * Copyright (c) 2012 Qualcomm Atheros - * Copyright (c) 2012-2013 Marek Lindner <marek@open-mesh.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> -#include <linux/ath9k_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <linux/platform_data/phy-at803x.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define MR900_GPIO_LED_LAN 12 -#define MR900_GPIO_LED_WLAN_2G 13 -#define MR900_GPIO_LED_STATUS_GREEN 19 -#define MR900_GPIO_LED_STATUS_RED 21 -#define MR900_GPIO_LED_POWER 22 -#define MR900_GPIO_LED_WLAN_5G 23 - -#define MR900_GPIO_BTN_RESET 17 - -#define MR900_KEYS_POLL_INTERVAL 20 /* msecs */ -#define MR900_KEYS_DEBOUNCE_INTERVAL (3 * MR900_KEYS_POLL_INTERVAL) - -#define MR900_MAC0_OFFSET 0 -#define MR900_WMAC_CALDATA_OFFSET 0x1000 -#define MR900_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led mr900_leds_gpio[] __initdata = { - { - .name = "mr900:blue:power", - .gpio = MR900_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "mr900:blue:wan", - .gpio = MR900_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "mr900:blue:wlan24", - .gpio = MR900_GPIO_LED_WLAN_2G, - .active_low = 1, - }, - { - .name = "mr900:blue:wlan58", - .gpio = MR900_GPIO_LED_WLAN_5G, - .active_low = 1, - }, - { - .name = "mr900:green:status", - .gpio = MR900_GPIO_LED_STATUS_GREEN, - .active_low = 1, - }, - { - .name = "mr900:red:status", - .gpio = MR900_GPIO_LED_STATUS_RED, - .active_low = 1, - }, -}; - -static struct gpio_keys_button mr900_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = MR900_KEYS_DEBOUNCE_INTERVAL, - .gpio = MR900_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct at803x_platform_data mr900_at803x_data = { - .disable_smarteee = 1, - .enable_rgmii_rx_delay = 1, - .enable_rgmii_tx_delay = 0, - .fixup_rgmii_tx_delay = 1, -}; - -static struct mdio_board_info mr900_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 5, - .platform_data = &mr900_at803x_data, - }, -}; - -static void __init mr900_setup_qca955x_eth_cfg(u32 mask, - unsigned int rxd, - unsigned int rxdv, - unsigned int txd, - unsigned int txe) -{ - void __iomem *base; - u32 t; - - base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); - - t = mask; - t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT; - t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT; - t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT; - t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT; - - __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - -static void __init mr900_setup(void) -{ - u8 *art = (u8 *)KSEG1ADDR(0x1fff0000); - u8 mac[6], pcie_mac[6]; - struct ath9k_platform_data *pdata; - - ath79_eth0_pll_data.pll_1000 = 0xae000000; - ath79_eth0_pll_data.pll_100 = 0xa0000101; - ath79_eth0_pll_data.pll_10 = 0xa0001313; - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(mr900_leds_gpio), - mr900_leds_gpio); - ath79_register_gpio_keys_polled(-1, MR900_KEYS_POLL_INTERVAL, - ARRAY_SIZE(mr900_gpio_keys), - mr900_gpio_keys); - - ath79_init_mac(mac, art + MR900_MAC0_OFFSET, 1); - ath79_register_wmac(art + MR900_WMAC_CALDATA_OFFSET, mac); - ath79_init_mac(pcie_mac, art + MR900_MAC0_OFFSET, 16); - ap91_pci_init(art + MR900_PCIE_CALDATA_OFFSET, pcie_mac); - pdata = ap9x_pci_get_wmac_data(0); - if (!pdata) { - pr_err("mr900: unable to get address of wlan data\n"); - return; - } - pdata->use_eeprom = true; - - mr900_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0); - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(mr900_mdio0_info, - ARRAY_SIZE(mr900_mdio0_info)); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + MR900_MAC0_OFFSET, 0); - - /* GMAC0 is connected to the RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(5); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_MR900, "MR900", "OpenMesh MR900", mr900_setup); -MIPS_MACHINE(ATH79_MACH_MR900v2, "MR900v2", "OpenMesh MR900v2", mr900_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n600.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n600.c deleted file mode 100644 index a87413d201..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n600.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - * WD My Net N600 board support - * - * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "nvram.h" - -#define MYNET_N600_GPIO_LED_WIFI 0 -#define MYNET_N600_GPIO_LED_POWER 11 -#define MYNET_N600_GPIO_LED_INTERNET 12 -#define MYNET_N600_GPIO_LED_WPS 13 - -#define MYNET_N600_GPIO_LED_LAN1 4 -#define MYNET_N600_GPIO_LED_LAN2 3 -#define MYNET_N600_GPIO_LED_LAN3 2 -#define MYNET_N600_GPIO_LED_LAN4 1 - -#define MYNET_N600_GPIO_BTN_RESET 16 -#define MYNET_N600_GPIO_BTN_WPS 17 - -#define MYNET_N600_GPIO_EXTERNAL_LNA0 14 -#define MYNET_N600_GPIO_EXTERNAL_LNA1 15 - -#define MYNET_N600_KEYS_POLL_INTERVAL 20 /* msecs */ -#define MYNET_N600_KEYS_DEBOUNCE_INTERVAL (3 * MYNET_N600_KEYS_POLL_INTERVAL) - -#define MYNET_N600_MAC0_OFFSET 0 -#define MYNET_N600_MAC1_OFFSET 6 -#define MYNET_N600_WMAC_CALDATA_OFFSET 0x1000 -#define MYNET_N600_PCIE_CALDATA_OFFSET 0x5000 - -#define MYNET_N600_NVRAM_ADDR 0x1f058010 -#define MYNET_N600_NVRAM_SIZE 0x7ff0 - -static struct gpio_led mynet_n600_leds_gpio[] __initdata = { - { - .name = "wd:blue:power", - .gpio = MYNET_N600_GPIO_LED_POWER, - .active_low = 0, - }, - { - .name = "wd:blue:wps", - .gpio = MYNET_N600_GPIO_LED_WPS, - .active_low = 0, - }, - { - .name = "wd:blue:wireless", - .gpio = MYNET_N600_GPIO_LED_WIFI, - .active_low = 0, - }, - { - .name = "wd:blue:internet", - .gpio = MYNET_N600_GPIO_LED_INTERNET, - .active_low = 0, - }, - { - .name = "wd:green:lan1", - .gpio = MYNET_N600_GPIO_LED_LAN1, - .active_low = 1, - }, - { - .name = "wd:green:lan2", - .gpio = MYNET_N600_GPIO_LED_LAN2, - .active_low = 1, - }, - { - .name = "wd:green:lan3", - .gpio = MYNET_N600_GPIO_LED_LAN3, - .active_low = 1, - }, - { - .name = "wd:green:lan4", - .gpio = MYNET_N600_GPIO_LED_LAN4, - .active_low = 1, - }, -}; - -static struct gpio_keys_button mynet_n600_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = MYNET_N600_KEYS_DEBOUNCE_INTERVAL, - .gpio = MYNET_N600_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = MYNET_N600_KEYS_DEBOUNCE_INTERVAL, - .gpio = MYNET_N600_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - -static void mynet_n600_get_mac(const char *name, char *mac) -{ - u8 *nvram = (u8 *) KSEG1ADDR(MYNET_N600_NVRAM_ADDR); - int err; - - err = ath79_nvram_parse_mac_addr(nvram, MYNET_N600_NVRAM_SIZE, - name, mac); - if (err) - pr_err("no MAC address found for %s\n", name); -} - -#define MYNET_N600_WAN_PHY_MASK BIT(0) - -static void __init mynet_n600_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 tmpmac[ETH_ALEN]; - - ath79_register_m25p80(NULL); - - ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN1, - AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN2, - AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN3, - AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN4, - AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(MYNET_N600_GPIO_LED_INTERNET, - AR934X_GPIO_OUT_GPIO); - ath79_register_leds_gpio(-1, ARRAY_SIZE(mynet_n600_leds_gpio), - mynet_n600_leds_gpio); - - ath79_register_gpio_keys_polled(-1, MYNET_N600_KEYS_POLL_INTERVAL, - ARRAY_SIZE(mynet_n600_gpio_keys), - mynet_n600_gpio_keys); - - /* - * Control signal for external LNAs 0 and 1 - * Taken from GPL bootloader source: - * board/ar7240/db12x/alpha_gpio.c - */ - ath79_wmac_set_ext_lna_gpio(0, MYNET_N600_GPIO_EXTERNAL_LNA0); - ath79_wmac_set_ext_lna_gpio(1, MYNET_N600_GPIO_EXTERNAL_LNA1); - - mynet_n600_get_mac("wlan24mac=", tmpmac); - ath79_register_wmac(art + MYNET_N600_WMAC_CALDATA_OFFSET, tmpmac); - - mynet_n600_get_mac("wlan5mac=", tmpmac); - ap91_pci_init(art + MYNET_N600_PCIE_CALDATA_OFFSET, tmpmac); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE | - AR934X_ETH_CFG_SW_PHY_SWAP); - - ath79_register_mdio(1, 0x0); - - /* LAN */ - mynet_n600_get_mac("lanmac=", ath79_eth1_data.mac_addr); - - /* GMAC1 is connected to the internal switch */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - - ath79_register_eth(1); - - /* WAN */ - mynet_n600_get_mac("wanmac=", ath79_eth0_data.mac_addr); - - /* GMAC0 is connected to the PHY4 of the internal switch */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = MYNET_N600_WAN_PHY_MASK; - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = MYNET_N600_WAN_PHY_MASK; - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - - ath79_register_eth(0); - - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_MYNET_N600, "MYNET-N600", "WD My Net N600", - mynet_n600_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c deleted file mode 100644 index a822b6c3e2..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c +++ /dev/null @@ -1,226 +0,0 @@ -/* - * WD My Net N750 board support - * - * Copyright (C) 2013 Felix Kaechele <felix@fetzig.org> - * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "nvram.h" - - -/* - * Taken from GPL bootloader source: - * board/ar7240/db12x/alpha_gpio.c - */ -#define MYNET_N750_GPIO_LED_WIFI 11 -#define MYNET_N750_GPIO_LED_INTERNET 12 -#define MYNET_N750_GPIO_LED_WPS 13 -#define MYNET_N750_GPIO_LED_POWER 14 - -#define MYNET_N750_GPIO_BTN_RESET 17 -#define MYNET_N750_GPIO_BTN_WPS 19 - -#define MYNET_N750_GPIO_EXTERNAL_LNA0 15 -#define MYNET_N750_GPIO_EXTERNAL_LNA1 18 - -#define MYNET_N750_KEYS_POLL_INTERVAL 20 /* msecs */ -#define MYNET_N750_KEYS_DEBOUNCE_INTERVAL (3 * MYNET_N750_KEYS_POLL_INTERVAL) - -#define MYNET_N750_WMAC_CALDATA_OFFSET 0x1000 -#define MYNET_N750_PCIE_CALDATA_OFFSET 0x5000 - -#define MYNET_N750_NVRAM_ADDR 0x1f058010 -#define MYNET_N750_NVRAM_SIZE 0x7ff0 - -static struct gpio_led mynet_n750_leds_gpio[] __initdata = { - { - .name = "wd:blue:power", - .gpio = MYNET_N750_GPIO_LED_POWER, - .active_low = 0, - }, - { - .name = "wd:blue:wps", - .gpio = MYNET_N750_GPIO_LED_WPS, - .active_low = 0, - }, - { - .name = "wd:blue:wireless", - .gpio = MYNET_N750_GPIO_LED_WIFI, - .active_low = 0, - }, - { - .name = "wd:blue:internet", - .gpio = MYNET_N750_GPIO_LED_INTERNET, - .active_low = 0, - }, -}; - -static struct gpio_keys_button mynet_n750_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = MYNET_N750_KEYS_DEBOUNCE_INTERVAL, - .gpio = MYNET_N750_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = MYNET_N750_KEYS_DEBOUNCE_INTERVAL, - .gpio = MYNET_N750_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - -static const struct ar8327_led_info mynet_n750_leds_ar8327[] = { - AR8327_LED_INFO(PHY0_0, HW, "wd:green:lan1"), - AR8327_LED_INFO(PHY1_0, HW, "wd:green:lan2"), - AR8327_LED_INFO(PHY2_0, HW, "wd:green:lan3"), - AR8327_LED_INFO(PHY3_0, HW, "wd:green:lan4"), - AR8327_LED_INFO(PHY4_0, HW, "wd:green:wan"), - AR8327_LED_INFO(PHY0_1, HW, "wd:yellow:lan1"), - AR8327_LED_INFO(PHY1_1, HW, "wd:yellow:lan2"), - AR8327_LED_INFO(PHY2_1, HW, "wd:yellow:lan3"), - AR8327_LED_INFO(PHY3_1, HW, "wd:yellow:lan4"), - AR8327_LED_INFO(PHY4_1, HW, "wd:yellow:wan"), -}; - -static struct ar8327_pad_cfg mynet_n750_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_led_cfg mynet_n750_ar8327_led_cfg = { - .led_ctrl0 = 0xcc35cc35, - .led_ctrl1 = 0xca35ca35, - .led_ctrl2 = 0xc935c935, - .led_ctrl3 = 0x03ffff00, - .open_drain = false, -}; - -static struct ar8327_platform_data mynet_n750_ar8327_data = { - .pad0_cfg = &mynet_n750_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &mynet_n750_ar8327_led_cfg, - .num_leds = ARRAY_SIZE(mynet_n750_leds_ar8327), - .leds = mynet_n750_leds_ar8327, -}; - -static struct mdio_board_info mynet_n750_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &mynet_n750_ar8327_data, - }, -}; - -static void mynet_n750_get_mac(const char *name, char *mac) -{ - u8 *nvram = (u8 *) KSEG1ADDR(MYNET_N750_NVRAM_ADDR); - int err; - - err = ath79_nvram_parse_mac_addr(nvram, MYNET_N750_NVRAM_SIZE, - name, mac); - if (err) - pr_err("no MAC address found for %s\n", name); -} - -/* - * The bootloader on this board powers down all PHYs on the switch - * before booting the kernel. We bring all PHYs back up so that they are - * discoverable by the mdio bus scan and the switch is detected - * correctly. - */ -static void mynet_n750_mdio_fixup(struct mii_bus *bus) -{ - int i; - - for (i = 0; i < 5; i++) - bus->write(bus, i, MII_BMCR, - (BMCR_RESET | BMCR_ANENABLE | BMCR_SPEED1000)); - - mdelay(1000); -} - -static void __init mynet_n750_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 tmpmac[ETH_ALEN]; - - ath79_register_m25p80(NULL); - ath79_register_leds_gpio(-1, ARRAY_SIZE(mynet_n750_leds_gpio), - mynet_n750_leds_gpio); - ath79_register_gpio_keys_polled(-1, MYNET_N750_KEYS_POLL_INTERVAL, - ARRAY_SIZE(mynet_n750_gpio_keys), - mynet_n750_gpio_keys); - /* - * Control signal for external LNAs 0 and 1 - * Taken from GPL bootloader source: - * board/ar7240/db12x/alpha_gpio.c - */ - ath79_wmac_set_ext_lna_gpio(0, MYNET_N750_GPIO_EXTERNAL_LNA0); - ath79_wmac_set_ext_lna_gpio(1, MYNET_N750_GPIO_EXTERNAL_LNA1); - - mynet_n750_get_mac("wlan24mac=", tmpmac); - ath79_register_wmac(art + MYNET_N750_WMAC_CALDATA_OFFSET, tmpmac); - - mynet_n750_get_mac("wlan5mac=", tmpmac); - ap91_pci_init(art + MYNET_N750_PCIE_CALDATA_OFFSET, tmpmac); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); - - mdiobus_register_board_info(mynet_n750_mdio0_info, - ARRAY_SIZE(mynet_n750_mdio0_info)); - - ath79_mdio0_data.reset = mynet_n750_mdio_fixup; - ath79_register_mdio(0, 0x0); - - mynet_n750_get_mac("lanmac=", ath79_eth0_data.mac_addr); - - /* GMAC0 is connected to an AR8327N switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_register_eth(0); - - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_MYNET_N750, "MYNET-N750", "WD My Net N750", - mynet_n750_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c deleted file mode 100644 index cfb075b681..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c +++ /dev/null @@ -1,208 +0,0 @@ -/* - * WD My Net WI-FI Range Extender (Codename:Starfish db12x) board support - * - * Copyright (C) 2013 Christian Lamparter <chunkeey@googlemail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> -#include <linux/platform_data/phy-at803x.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "nvram.h" - -#define MYNET_REXT_GPIO_LED_POWER 11 -#define MYNET_REXT_GPIO_LED_ETHERNET 12 -#define MYNET_REXT_GPIO_LED_WIFI 19 - -#define MYNET_REXT_GPIO_LED_RF_QTY1 20 -#define MYNET_REXT_GPIO_LED_RF_QTY2 21 -#define MYNET_REXT_GPIO_LED_RF_QTY3 22 - -#define MYNET_REXT_GPIO_BTN_RESET 13 -#define MYNET_REXT_GPIO_BTN_WPS 15 -#define MYNET_REXT_GPIO_SW_RF 14 - -#define MYNET_REXT_GPIO_PHY_SWRST 16 /* disables Ethernet PHY */ -#define MYNET_REXT_GPIO_PHY_INT 17 -#define MYNET_REXT_GPIO_18 18 - -#define MYNET_REXT_KEYS_POLL_INTERVAL 20 /* msecs */ -#define MYNET_REXT_KEYS_DEBOUNCE_INTERVAL (3 * MYNET_REXT_KEYS_POLL_INTERVAL) - -#define MYNET_REXT_WMAC_CALDATA_OFFSET 0x1000 - -#define MYNET_REXT_NVRAM_ADDR 0x1f7e0010 -#define MYNET_REXT_NVRAM_SIZE 0xfff0 - -#define MYNET_REXT_ART_ADDR 0x1f7f0000 - -static const char *mynet_rext_part_probes[] = { - "cybertan", - NULL, -}; - -static struct flash_platform_data mynet_rext_flash_data = { - .type = "s25fl064k", - .part_probes = mynet_rext_part_probes, -}; - -static struct gpio_led mynet_rext_leds_gpio[] __initdata = { - { - .name = "wd:blue:power", - .gpio = MYNET_REXT_GPIO_LED_POWER, - .active_low = 0, - }, - { - .name = "wd:blue:wireless", - .gpio = MYNET_REXT_GPIO_LED_WIFI, - .active_low = 1, - }, - { - .name = "wd:blue:ethernet", - .gpio = MYNET_REXT_GPIO_LED_ETHERNET, - .active_low = 1, - }, - { - .name = "wd:blue:quality1", - .gpio = MYNET_REXT_GPIO_LED_RF_QTY1, - .active_low = 1, - }, - { - .name = "wd:blue:quality2", - .gpio = MYNET_REXT_GPIO_LED_RF_QTY2, - .active_low = 1, - }, - { - .name = "wd:blue:quality3", - .gpio = MYNET_REXT_GPIO_LED_RF_QTY3, - .active_low = 1, - }, -}; - -static struct gpio_keys_button mynet_rext_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = MYNET_REXT_KEYS_DEBOUNCE_INTERVAL, - .gpio = MYNET_REXT_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = MYNET_REXT_KEYS_DEBOUNCE_INTERVAL, - .gpio = MYNET_REXT_GPIO_BTN_WPS, - .active_low = 1, - }, - { - .desc = "RF Band switch", - .type = EV_SW, - .code = BTN_1, - .debounce_interval = MYNET_REXT_KEYS_DEBOUNCE_INTERVAL, - .gpio = MYNET_REXT_GPIO_SW_RF, - }, -}; - -static struct at803x_platform_data mynet_rext_at803x_data = { - .disable_smarteee = 0, - .enable_rgmii_rx_delay = 1, - .enable_rgmii_tx_delay = 0, - .fixup_rgmii_tx_delay = 1, -}; - -static struct mdio_board_info mynet_rext_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 4, - .platform_data = &mynet_rext_at803x_data, - }, -}; - -static void mynet_rext_get_mac(const char *name, char *mac) -{ - u8 *nvram = (u8 *) KSEG1ADDR(MYNET_REXT_NVRAM_ADDR); - int err; - - err = ath79_nvram_parse_mac_addr(nvram, MYNET_REXT_NVRAM_SIZE, - name, mac); - if (err) - pr_err("no MAC address found for %s\n", name); -} - -static void __init mynet_rext_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(MYNET_REXT_ART_ADDR); - u8 tmpmac[ETH_ALEN]; - - ath79_register_m25p80(&mynet_rext_flash_data); - - /* GPIO configuration from drivers/char/GPIO8.c */ - - ath79_gpio_output_select(MYNET_REXT_GPIO_LED_POWER, - AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(MYNET_REXT_GPIO_LED_WIFI, - AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(MYNET_REXT_GPIO_LED_RF_QTY1, - AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(MYNET_REXT_GPIO_LED_RF_QTY2, - AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(MYNET_REXT_GPIO_LED_RF_QTY3, - AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(MYNET_REXT_GPIO_LED_ETHERNET, - AR934X_GPIO_OUT_GPIO); - ath79_register_leds_gpio(-1, ARRAY_SIZE(mynet_rext_leds_gpio), - mynet_rext_leds_gpio); - - ath79_register_gpio_keys_polled(-1, MYNET_REXT_KEYS_POLL_INTERVAL, - ARRAY_SIZE(mynet_rext_gpio_keys), - mynet_rext_gpio_keys); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | - AR934X_ETH_CFG_RXD_DELAY | - AR934X_ETH_CFG_RDV_DELAY); - - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(mynet_rext_mdio0_info, - ARRAY_SIZE(mynet_rext_mdio0_info)); - - /* LAN */ - mynet_rext_get_mac("et0macaddr=", ath79_eth0_data.mac_addr); - - /* GMAC0 is connected to an external PHY on Port 4 */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_pll_data.pll_10 = 0x00001313; /* athrs_mac.c */ - ath79_eth0_pll_data.pll_1000 = 0x0e000000; /* athrs_mac.c */ - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_register_eth(0); - - /* WLAN */ - mynet_rext_get_mac("wl0_hwaddr=", tmpmac); - ap91_pci_init(art + MYNET_REXT_WMAC_CALDATA_OFFSET, tmpmac); -} - -MIPS_MACHINE(ATH79_MACH_MYNET_REXT, "MYNET-REXT", - "WD My Net Wi-Fi Range Extender", mynet_rext_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w04nu.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w04nu.c deleted file mode 100644 index c2460ce33c..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w04nu.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * Planex MZK-W04NU board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define MZK_W04NU_GPIO_LED_USB 0 -#define MZK_W04NU_GPIO_LED_STATUS 1 -#define MZK_W04NU_GPIO_LED_WPS 3 -#define MZK_W04NU_GPIO_LED_WLAN 6 -#define MZK_W04NU_GPIO_LED_AP 15 -#define MZK_W04NU_GPIO_LED_ROUTER 16 - -#define MZK_W04NU_GPIO_BTN_APROUTER 5 -#define MZK_W04NU_GPIO_BTN_WPS 12 -#define MZK_W04NU_GPIO_BTN_RESET 21 - -#define MZK_W04NU_KEYS_POLL_INTERVAL 20 /* msecs */ -#define MZK_W04NU_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W04NU_KEYS_POLL_INTERVAL) - -static struct gpio_led mzk_w04nu_leds_gpio[] __initdata = { - { - .name = "planex:green:status", - .gpio = MZK_W04NU_GPIO_LED_STATUS, - .active_low = 1, - }, { - .name = "planex:blue:wps", - .gpio = MZK_W04NU_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "planex:green:wlan", - .gpio = MZK_W04NU_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "planex:green:usb", - .gpio = MZK_W04NU_GPIO_LED_USB, - .active_low = 1, - }, { - .name = "planex:green:ap", - .gpio = MZK_W04NU_GPIO_LED_AP, - .active_low = 1, - }, { - .name = "planex:green:router", - .gpio = MZK_W04NU_GPIO_LED_ROUTER, - .active_low = 1, - } -}; - -static struct gpio_keys_button mzk_w04nu_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZK_W04NU_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZK_W04NU_GPIO_BTN_WPS, - .active_low = 1, - }, { - .desc = "aprouter", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZK_W04NU_GPIO_BTN_APROUTER, - .active_low = 0, - } -}; - -#define MZK_W04NU_WAN_PHYMASK BIT(4) -#define MZK_W04NU_MDIO_MASK (~MZK_W04NU_WAN_PHYMASK) - -static void __init mzk_w04nu_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_mdio(0, MZK_W04NU_MDIO_MASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.has_ar8216 = 1; - - ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = MZK_W04NU_WAN_PHYMASK; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w04nu_leds_gpio), - mzk_w04nu_leds_gpio); - - ath79_register_gpio_keys_polled(-1, MZK_W04NU_KEYS_POLL_INTERVAL, - ARRAY_SIZE(mzk_w04nu_gpio_keys), - mzk_w04nu_gpio_keys); - ath79_register_usb(); - - ath79_register_wmac(eeprom, NULL); -} - -MIPS_MACHINE(ATH79_MACH_MZK_W04NU, "MZK-W04NU", "Planex MZK-W04NU", - mzk_w04nu_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w300nh.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w300nh.c deleted file mode 100644 index 8c40365283..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w300nh.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Planex MZK-W300NH board support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define MZK_W300NH_GPIO_LED_STATUS 1 -#define MZK_W300NH_GPIO_LED_WPS 3 -#define MZK_W300NH_GPIO_LED_WLAN 6 -#define MZK_W300NH_GPIO_LED_AP_GREEN 15 -#define MZK_W300NH_GPIO_LED_AP_AMBER 16 - -#define MZK_W300NH_GPIO_BTN_APROUTER 5 -#define MZK_W300NH_GPIO_BTN_WPS 12 -#define MZK_W300NH_GPIO_BTN_RESET 21 - -#define MZK_W300NH_KEYS_POLL_INTERVAL 20 /* msecs */ -#define MZK_W300NH_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W300NH_KEYS_POLL_INTERVAL) - -static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = { - { - .name = "planex:green:status", - .gpio = MZK_W300NH_GPIO_LED_STATUS, - .active_low = 1, - }, { - .name = "planex:blue:wps", - .gpio = MZK_W300NH_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "planex:green:wlan", - .gpio = MZK_W300NH_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "planex:green:aprouter", - .gpio = MZK_W300NH_GPIO_LED_AP_GREEN, - }, { - .name = "planex:amber:aprouter", - .gpio = MZK_W300NH_GPIO_LED_AP_AMBER, - } -}; - -static struct gpio_keys_button mzk_w300nh_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZK_W300NH_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZK_W300NH_GPIO_BTN_WPS, - .active_low = 1, - }, { - .desc = "aprouter", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZK_W300NH_GPIO_BTN_APROUTER, - .active_low = 0, - } -}; - -#define MZK_W300NH_WAN_PHYMASK BIT(4) -#define MZK_W300NH_MDIO_MASK (~MZK_W300NH_WAN_PHYMASK) - -static void __init mzk_w300nh_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_mdio(0, MZK_W300NH_MDIO_MASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.has_ar8216 = 1; - - ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio), - mzk_w300nh_leds_gpio); - - ath79_register_gpio_keys_polled(-1, MZK_W300NH_KEYS_POLL_INTERVAL, - ARRAY_SIZE(mzk_w300nh_gpio_keys), - mzk_w300nh_gpio_keys); - ath79_register_wmac(eeprom, NULL); -} - -MIPS_MACHINE(ATH79_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH", - mzk_w300nh_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-n5q.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-n5q.c deleted file mode 100644 index 895fc32933..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-n5q.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * ALFA Network N5Q board support - * - * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define N5Q_GPIO_LED_LAN 19 -#define N5Q_GPIO_LED_SIGNAL1 0 -#define N5Q_GPIO_LED_SIGNAL2 1 -#define N5Q_GPIO_LED_SIGNAL3 2 -#define N5Q_GPIO_LED_SIGNAL4 3 -#define N5Q_GPIO_LED_WAN 18 -#define N5Q_GPIO_LED_WLAN 12 - -#define N5Q_GPIO_WDT_EN 16 -#define N5Q_GPIO_WDT_IN 17 - -#define N5Q_GPIO_BTN_RESET 11 - -#define N5Q_MAC0_OFFSET 0 -#define N5Q_MAC1_OFFSET 6 -#define N5Q_WMAC_CALDATA_OFFSET 0x1000 - -#define N5Q_KEYS_POLL_INTERVAL 20 -#define N5Q_KEYS_DEBOUNCE_INTERVAL (3 * N5Q_KEYS_POLL_INTERVAL) - -static struct gpio_led n5q_leds_gpio[] __initdata = { - { - .name = "n5q:green:lan", - .gpio = N5Q_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "n5q:red:signal1", - .gpio = N5Q_GPIO_LED_SIGNAL1, - .active_low = 1, - }, { - .name = "n5q:orange:signal2", - .gpio = N5Q_GPIO_LED_SIGNAL2, - .active_low = 1, - }, { - .name = "n5q:green:signal3", - .gpio = N5Q_GPIO_LED_SIGNAL3, - .active_low = 1, - }, { - .name = "n5q:green:signal4", - .gpio = N5Q_GPIO_LED_SIGNAL4, - .active_low = 1, - }, { - .name = "n5q:green:wan", - .gpio = N5Q_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "n5q:green:wlan", - .gpio = N5Q_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button n5q_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = N5Q_KEYS_DEBOUNCE_INTERVAL, - .gpio = N5Q_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static void __init n5q_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1f070000); - - ath79_register_m25p80(NULL); - - ath79_register_mdio(1, 0x0); - - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = 0xf7; - - /* LAN */ - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_init_mac(ath79_eth1_data.mac_addr, art + N5Q_MAC1_OFFSET, 0); - ath79_register_eth(1); - - /* WAN */ - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.speed = SPEED_100; - ath79_init_mac(ath79_eth0_data.mac_addr, art + N5Q_MAC0_OFFSET, 0); - ath79_register_eth(0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(n5q_leds_gpio), - n5q_leds_gpio); - - ath79_register_gpio_keys_polled(-1, N5Q_KEYS_POLL_INTERVAL, - ARRAY_SIZE(n5q_gpio_keys), - n5q_gpio_keys); - - gpio_request_one(N5Q_GPIO_WDT_IN, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "WDT input"); - - gpio_request_one(N5Q_GPIO_WDT_EN, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "WDT enable"); - - ath79_register_wmac(art + N5Q_WMAC_CALDATA_OFFSET, NULL); -} - -MIPS_MACHINE(ATH79_MACH_N5Q, "N5Q", "ALFA Network N5Q", n5q_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg460n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg460n.c deleted file mode 100644 index ca007779ec..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg460n.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Zyxel NBG 460N/550N/550NH board support - * - * Copyright (C) 2010 Michael Kurz <michi.kurz@googlemail.com> - * - * based on mach-tl-wr1043nd.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/i2c-algo-bit.h> -#include <linux/i2c-gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> -#include <linux/rtl8366.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -/* LEDs */ -#define NBG460N_GPIO_LED_WPS 3 -#define NBG460N_GPIO_LED_WAN 6 -#define NBG460N_GPIO_LED_POWER 14 -#define NBG460N_GPIO_LED_WLAN 15 - -/* Buttons */ -#define NBG460N_GPIO_BTN_WPS 12 -#define NBG460N_GPIO_BTN_RESET 21 - -#define NBG460N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define NBG460N_KEYS_DEBOUNCE_INTERVAL (3 * NBG460N_KEYS_POLL_INTERVAL) - -/* RTC chip PCF8563 I2C interface */ -#define NBG460N_GPIO_PCF8563_SDA 8 -#define NBG460N_GPIO_PCF8563_SCK 7 - -/* Switch configuration I2C interface */ -#define NBG460N_GPIO_RTL8366_SDA 16 -#define NBG460N_GPIO_RTL8366_SCK 18 - -static struct mtd_partition nbg460n_partitions[] = { - { - .name = "Bootbase", - .offset = 0, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "U-Boot Config", - .offset = 0x010000, - .size = 0x030000, - }, { - .name = "U-Boot", - .offset = 0x040000, - .size = 0x030000, - }, { - .name = "linux", - .offset = 0x070000, - .size = 0x0e0000, - }, { - .name = "rootfs", - .offset = 0x150000, - .size = 0x2a0000, - }, { - .name = "CalibData", - .offset = 0x3f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x070000, - .size = 0x380000, - } -}; - -static struct flash_platform_data nbg460n_flash_data = { - .parts = nbg460n_partitions, - .nr_parts = ARRAY_SIZE(nbg460n_partitions), -}; - -static struct gpio_led nbg460n_leds_gpio[] __initdata = { - { - .name = "nbg460n:green:power", - .gpio = NBG460N_GPIO_LED_POWER, - .active_low = 0, - .default_trigger = "default-on", - }, { - .name = "nbg460n:green:wps", - .gpio = NBG460N_GPIO_LED_WPS, - .active_low = 0, - }, { - .name = "nbg460n:green:wlan", - .gpio = NBG460N_GPIO_LED_WLAN, - .active_low = 0, - }, { - /* Not really for controlling the LED, - when set low the LED blinks uncontrollable */ - .name = "nbg460n:green:wan", - .gpio = NBG460N_GPIO_LED_WAN, - .active_low = 0, - } -}; - -static struct gpio_keys_button nbg460n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL, - .gpio = NBG460N_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL, - .gpio = NBG460N_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static struct i2c_gpio_platform_data nbg460n_i2c_device_platdata = { - .sda_pin = NBG460N_GPIO_PCF8563_SDA, - .scl_pin = NBG460N_GPIO_PCF8563_SCK, - .udelay = 10, -}; - -static struct platform_device nbg460n_i2c_device = { - .name = "i2c-gpio", - .id = -1, - .num_resources = 0, - .resource = NULL, - .dev = { - .platform_data = &nbg460n_i2c_device_platdata, - }, -}; - -static struct i2c_board_info nbg460n_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, -}; - -static void nbg460n_i2c_init(void) -{ - /* The gpio interface */ - platform_device_register(&nbg460n_i2c_device); - /* I2C devices */ - i2c_register_board_info(0, nbg460n_i2c_devs, - ARRAY_SIZE(nbg460n_i2c_devs)); -} - - -static struct rtl8366_platform_data nbg460n_rtl8366s_data = { - .gpio_sda = NBG460N_GPIO_RTL8366_SDA, - .gpio_sck = NBG460N_GPIO_RTL8366_SCK, -}; - -static struct platform_device nbg460n_rtl8366s_device = { - .name = RTL8366S_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &nbg460n_rtl8366s_data, - } -}; - -static void __init nbg460n_setup(void) -{ - /* end of bootloader sector contains mac address */ - u8 *mac = (u8 *) KSEG1ADDR(0x1fc0fff8); - /* last sector contains wlan calib data */ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - /* LAN Port */ - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - - /* WAN Port */ - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - ath79_eth1_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = 0x10; - - ath79_register_eth(0); - ath79_register_eth(1); - - /* register the switch phy */ - platform_device_register(&nbg460n_rtl8366s_device); - - /* register flash */ - ath79_register_m25p80(&nbg460n_flash_data); - - ath79_register_wmac(eeprom, mac); - - /* register RTC chip */ - nbg460n_i2c_init(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(nbg460n_leds_gpio), - nbg460n_leds_gpio); - - ath79_register_gpio_keys_polled(-1, NBG460N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(nbg460n_gpio_keys), - nbg460n_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_NBG460N, "NBG460N", "Zyxel NBG460N/550N/550NH", - nbg460n_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c deleted file mode 100644 index b0fbb78d82..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c +++ /dev/null @@ -1,385 +0,0 @@ -/* - * ZyXEL NBG6716/NBG6616 board support - * - * Based on the Qualcomm Atheros AP135/AP136 reference board support code - * Copyright (c) 2012 Qualcomm Atheros - * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2013 Andre Valentin <avalentin@marcant.net> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/version.h> -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0) -#include <linux/mtd/nand.h> -#else -#include <linux/mtd/rawnand.h> -#endif -#include <linux/platform/ar934x_nfc.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-nfc.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "nvram.h" - -#define NBG6716_GPIO_LED_INTERNET 18 -#define NBG6716_GPIO_LED_POWER 15 -#define NBG6716_GPIO_LED_USB1 4 -#define NBG6716_GPIO_LED_USB2 13 -#define NBG6716_GPIO_LED_WIFI2G 19 -#define NBG6716_GPIO_LED_WIFI5G 17 -#define NBG6716_GPIO_LED_WPS 21 - -#define NBG6716_GPIO_BTN_RESET 23 -#define NBG6716_GPIO_BTN_RFKILL 1 -#define NBG6716_GPIO_BTN_USB1 0 -#define NBG6716_GPIO_BTN_USB2 14 -#define NBG6716_GPIO_BTN_WPS 22 - -#define NBG6716_GPIO_USB_POWER 16 - -#define NBG6716_KEYS_POLL_INTERVAL 20 /* msecs */ -#define NBG6716_KEYS_DEBOUNCE_INTERVAL (3 * NBG6716_KEYS_POLL_INTERVAL) - -#define NBG6716_MAC0_OFFSET 0 -#define NBG6716_MAC1_OFFSET 6 -#define NBG6716_WMAC_CALDATA_OFFSET 0x1000 -#define NBG6716_PCIE_CALDATA_OFFSET 0x5000 - -/* NBG6616 has a different GPIO usage as it does not have USB Buttons */ -#define NBG6616_GPIO_LED_USB0 14 -#define NBG6616_GPIO_LED_USB1 21 -#define NBG6616_GPIO_LED_WPS 0 - -static struct gpio_led nbg6716_leds_gpio[] __initdata = { - { - .name = "nbg6716:white:internet", - .gpio = NBG6716_GPIO_LED_INTERNET, - .active_low = 1, - }, - { - .name = "nbg6716:white:power", - .gpio = NBG6716_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "nbg6716:white:usb1", - .gpio = NBG6716_GPIO_LED_USB1, - .active_low = 1, - }, - { - .name = "nbg6716:white:usb2", - .gpio = NBG6716_GPIO_LED_USB2, - .active_low = 1, - }, - { - .name = "nbg6716:white:wifi2g", - .gpio = NBG6716_GPIO_LED_WIFI2G, - .active_low = 1, - }, - { - .name = "nbg6716:white:wifi5g", - .gpio = NBG6716_GPIO_LED_WIFI5G, - .active_low = 1, - }, - { - .name = "nbg6716:white:wps", - .gpio = NBG6716_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button nbg6716_gpio_keys[] __initdata = { - { - .desc = "RESET button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL, - .gpio = NBG6716_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "RFKILL button", - .type = EV_SW, - .code = KEY_RFKILL, - .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL, - .gpio = NBG6716_GPIO_BTN_RFKILL, - .active_low = 0, - }, - { - .desc = "USB1 eject button", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL, - .gpio = NBG6716_GPIO_BTN_USB1, - .active_low = 1, - }, - { - .desc = "USB2 eject button", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL, - .gpio = NBG6716_GPIO_BTN_USB2, - .active_low = 1, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL, - .gpio = NBG6716_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - - - -static struct gpio_led nbg6616_leds_gpio[] __initdata = { - { - .name = "nbg6616:green:power", - .gpio = NBG6716_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "nbg6616:green:usb2", - .gpio = NBG6616_GPIO_LED_USB0, - .active_low = 1, - }, - { - .name = "nbg6616:green:usb1", - .gpio = NBG6616_GPIO_LED_USB1, - .active_low = 1, - }, - { - .name = "nbg6616:green:wifi2g", - .gpio = NBG6716_GPIO_LED_WIFI2G, - .active_low = 1, - }, - { - .name = "nbg6616:green:wifi5g", - .gpio = NBG6716_GPIO_LED_WIFI5G, - .active_low = 1, - }, - { - .name = "nbg6616:green:wps", - .gpio = NBG6616_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button nbg6616_gpio_keys[] __initdata = { - { - .desc = "RESET button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL, - .gpio = NBG6716_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "RFKILL button", - .type = EV_SW, - .code = KEY_RFKILL, - .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL, - .gpio = NBG6716_GPIO_BTN_RFKILL, - .active_low = 0, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL, - .gpio = NBG6716_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - - -static struct ar8327_pad_cfg nbg6716_ar8327_pad0_cfg; -static struct ar8327_pad_cfg nbg6716_ar8327_pad6_cfg; -static struct ar8327_led_cfg nbg6716_ar8327_led_cfg; - -static struct ar8327_platform_data nbg6716_ar8327_data = { - .pad0_cfg = &nbg6716_ar8327_pad0_cfg, - .pad6_cfg = &nbg6716_ar8327_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .port6_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &nbg6716_ar8327_led_cfg -}; - -static struct mdio_board_info nbg6716_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &nbg6716_ar8327_data, - }, -}; - -static void nbg6716_get_mac(void* nvram_addr, const char *name, char *mac) -{ - u8 *nvram = (u8 *) KSEG1ADDR(nvram_addr); - int err; - - err = ath79_nvram_parse_mac_addr(nvram, 0x10000, - name, mac); - if (err) - pr_err("no MAC address found for %s\n", name); -} - -static void __init nbg6716_common_setup(u32 leds_num, struct gpio_led* leds, - u32 keys_num, - struct gpio_keys_button* keys, - void* art_addr, void* nvram) -{ - u8 *art = (u8 *) KSEG1ADDR(art_addr); - u8 tmpmac[ETH_ALEN]; - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, leds_num, leds); - ath79_register_gpio_keys_polled(-1, NBG6716_KEYS_POLL_INTERVAL, - keys_num, keys); - - ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW); - ath79_register_nfc(); - - gpio_request_one(NBG6716_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - - ath79_register_usb(); - - nbg6716_get_mac(nvram, "ethaddr=", tmpmac); - - ath79_register_pci(); - - ath79_register_wmac(art + NBG6716_WMAC_CALDATA_OFFSET, tmpmac); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, tmpmac, 2); - ath79_init_mac(ath79_eth1_data.mac_addr, tmpmac, 3); - - mdiobus_register_board_info(nbg6716_mdio0_info, - ARRAY_SIZE(nbg6716_mdio0_info)); - - /* GMAC0 is connected to the RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - - ath79_register_eth(0); - - /* GMAC1 is connected to the SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(1); -} - -static void __init nbg6716_010_setup(void) -{ - /* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */ - nbg6716_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII; - nbg6716_ar8327_pad0_cfg.txclk_delay_en = true; - nbg6716_ar8327_pad0_cfg.rxclk_delay_en = true; - nbg6716_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; - nbg6716_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; - - /* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */ - nbg6716_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII; - nbg6716_ar8327_pad6_cfg.rxclk_delay_en = true; - nbg6716_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0; - - ath79_eth0_pll_data.pll_1000 = 0xa6000000; - ath79_eth1_pll_data.pll_1000 = 0x03000101; - - nbg6716_ar8327_led_cfg.open_drain = 0; - nbg6716_ar8327_led_cfg.led_ctrl0 = 0xffb7ffb7; - nbg6716_ar8327_led_cfg.led_ctrl1 = 0xffb7ffb7; - nbg6716_ar8327_led_cfg.led_ctrl2 = 0xffb7ffb7; - nbg6716_ar8327_led_cfg.led_ctrl3 = 0x03ffff00; - - nbg6716_common_setup(ARRAY_SIZE(nbg6716_leds_gpio), nbg6716_leds_gpio, - ARRAY_SIZE(nbg6716_gpio_keys), nbg6716_gpio_keys, - (void*) 0x1f050000, (void*) 0x1f040000); -} - -static void __init nbg6616_010_setup(void) -{ - /* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */ - nbg6716_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII; - nbg6716_ar8327_pad0_cfg.txclk_delay_en = true; - nbg6716_ar8327_pad0_cfg.rxclk_delay_en = true; - nbg6716_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; - nbg6716_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; - - /* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */ - nbg6716_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII; - nbg6716_ar8327_pad6_cfg.rxclk_delay_en = true; - nbg6716_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0; - - ath79_eth0_pll_data.pll_1000 = 0xa6000000; - ath79_eth1_pll_data.pll_1000 = 0x03000101; - - nbg6716_ar8327_led_cfg.open_drain = 0; - nbg6716_ar8327_led_cfg.led_ctrl0 = 0xffb7ffb7; - nbg6716_ar8327_led_cfg.led_ctrl1 = 0xffb7ffb7; - nbg6716_ar8327_led_cfg.led_ctrl2 = 0xffb7ffb7; - nbg6716_ar8327_led_cfg.led_ctrl3 = 0x03ffff00; - - - nbg6716_common_setup(ARRAY_SIZE(nbg6616_leds_gpio), nbg6616_leds_gpio, - ARRAY_SIZE(nbg6616_gpio_keys), nbg6616_gpio_keys, - (void*) 0x1f040000, (void*) 0x1f030000); -} - - -MIPS_MACHINE(ATH79_MACH_NBG6716, "NBG6716", - "Zyxel NBG6716", - nbg6716_010_setup); - -MIPS_MACHINE(ATH79_MACH_NBG6616, "NBG6616", - "Zyxel NBG6616", - nbg6616_010_setup); - diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c deleted file mode 100644 index c888f7d1a8..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c +++ /dev/null @@ -1,320 +0,0 @@ -/* - * OpenMesh OM2P support - * - * Copyright (C) 2011 Marek Lindner <marek@open-mesh.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define OM2P_GPIO_LED_POWER 0 -#define OM2P_GPIO_LED_GREEN 13 -#define OM2P_GPIO_LED_RED 14 -#define OM2P_GPIO_LED_YELLOW 15 -#define OM2P_GPIO_LED_LAN 16 -#define OM2P_GPIO_LED_WAN 17 -#define OM2P_GPIO_BTN_RESET 1 - -#define OM2P_KEYS_POLL_INTERVAL 20 /* msecs */ -#define OM2P_KEYS_DEBOUNCE_INTERVAL (3 * OM2P_KEYS_POLL_INTERVAL) - -#define OM2P_WAN_PHYMASK BIT(4) - -#define OM2P_LC_GPIO_LED_POWER 1 -#define OM2P_LC_GPIO_LED_GREEN 15 -#define OM2P_LC_GPIO_LED_RED 16 -#define OM2P_LC_GPIO_LED_YELLOW 0 -#define OM2P_LC_GPIO_LED_LAN 13 -#define OM2P_LC_GPIO_LED_WAN 17 -#define OM2P_LC_GPIO_BTN_RESET 12 - -#define OM2Pv4_GPIO_LED_POWER 0 -#define OM2Pv4_GPIO_LED_GREEN 2 -#define OM2Pv4_GPIO_LED_RED 4 -#define OM2Pv4_GPIO_LED_YELLOW 3 -#define OM2Pv4_GPIO_LED_LAN 14 -#define OM2Pv4_GPIO_LED_WAN 13 -#define OM2Pv4_GPIO_BTN_RESET 1 - -#define OM2P_WMAC_CALDATA_OFFSET 0x1000 - -static struct flash_platform_data om2p_flash_data = { - .type = "s25sl12800", - .name = "ar7240-nor0", -}; - -static struct gpio_led om2p_leds_gpio[] __initdata = { - { - .name = "om2p:blue:power", - .gpio = OM2P_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "om2p:red:wifi", - .gpio = OM2P_GPIO_LED_RED, - .active_low = 1, - }, { - .name = "om2p:yellow:wifi", - .gpio = OM2P_GPIO_LED_YELLOW, - .active_low = 1, - }, { - .name = "om2p:green:wifi", - .gpio = OM2P_GPIO_LED_GREEN, - .active_low = 1, - }, { - .name = "om2p:blue:lan", - .gpio = OM2P_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "om2p:blue:wan", - .gpio = OM2P_GPIO_LED_WAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button om2p_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = OM2P_KEYS_DEBOUNCE_INTERVAL, - .gpio = OM2P_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init om2p_setup(void) -{ - u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000); - u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN); - u8 *ee = (u8 *)KSEG1ADDR(0x1ffc1000); - - ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_register_m25p80(&om2p_flash_data); - - ath79_register_mdio(0, ~OM2P_WAN_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); - - ath79_register_eth(0); - ath79_register_eth(1); - - ap91_pci_init(ee, NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio), - om2p_leds_gpio); - - ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL, - ARRAY_SIZE(om2p_gpio_keys), - om2p_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_OM2P, "OM2P", "OpenMesh OM2P", om2p_setup); - - -static struct flash_platform_data om2p_lc_flash_data = { - .type = "s25sl12800", -}; - -static void __init om2p_lc_setup(void) -{ - u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000); - u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN); - u8 *art = (u8 *)KSEG1ADDR(0x1ffc1000); - u32 t; - - ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); - t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN; - ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t); - - ath79_register_m25p80(&om2p_lc_flash_data); - - om2p_leds_gpio[0].gpio = OM2P_LC_GPIO_LED_POWER; - om2p_leds_gpio[1].gpio = OM2P_LC_GPIO_LED_RED; - om2p_leds_gpio[2].gpio = OM2P_LC_GPIO_LED_YELLOW; - om2p_leds_gpio[3].gpio = OM2P_LC_GPIO_LED_GREEN; - om2p_leds_gpio[4].gpio = OM2P_LC_GPIO_LED_LAN; - om2p_leds_gpio[5].gpio = OM2P_LC_GPIO_LED_WAN; - ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio), - om2p_leds_gpio); - - om2p_gpio_keys[0].gpio = OM2P_LC_GPIO_BTN_RESET; - ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL, - ARRAY_SIZE(om2p_gpio_keys), - om2p_gpio_keys); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); - - ath79_register_mdio(0, 0x0); - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_wmac(art, NULL); -} - -MIPS_MACHINE(ATH79_MACH_OM2P_LC, "OM2P-LC", "OpenMesh OM2P LC", om2p_lc_setup); -MIPS_MACHINE(ATH79_MACH_OM2Pv2, "OM2Pv2", "OpenMesh OM2Pv2", om2p_lc_setup); - -static void __init om2p_hs_setup(void) -{ - u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000); - u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN); - u8 *art = (u8 *)KSEG1ADDR(0x1ffc1000); - - /* make lan / wan leds software controllable */ - ath79_gpio_output_select(OM2P_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(OM2P_GPIO_LED_WAN, AR934X_GPIO_OUT_GPIO); - - /* enable reset button */ - ath79_gpio_output_select(OM2P_GPIO_BTN_RESET, AR934X_GPIO_OUT_GPIO); - ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); - - om2p_leds_gpio[4].gpio = OM2P_GPIO_LED_WAN; - om2p_leds_gpio[5].gpio = OM2P_GPIO_LED_LAN; - - ath79_register_m25p80(&om2p_lc_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio), - om2p_leds_gpio); - ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL, - ARRAY_SIZE(om2p_gpio_keys), - om2p_gpio_keys); - - ath79_register_wmac(art, NULL); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP); - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); - - /* GMAC0 is connected to the PHY0 of the internal switch */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_register_eth(0); - - /* GMAC1 is connected to the internal switch */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_register_eth(1); -} - -MIPS_MACHINE(ATH79_MACH_OM2P_HS, "OM2P-HS", "OpenMesh OM2P HS", om2p_hs_setup); -MIPS_MACHINE(ATH79_MACH_OM2P_HSv2, "OM2P-HSv2", "OpenMesh OM2P HSv2", om2p_hs_setup); -MIPS_MACHINE(ATH79_MACH_OM2P_HSv3, "OM2P-HSv3", "OpenMesh OM2P HSv3", om2p_hs_setup); - -static struct flash_platform_data om2pv4_flash_data = { - .type = "s25sl12800", -}; - -static struct gpio_led om2pv4_leds_gpio[] __initdata = { - { - .name = "om2p:blue:power", - .gpio = OM2Pv4_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "om2p:red:wifi", - .gpio = OM2Pv4_GPIO_LED_RED, - .active_low = 1, - }, { - .name = "om2p:yellow:wifi", - .gpio = OM2Pv4_GPIO_LED_YELLOW, - .active_low = 1, - }, { - .name = "om2p:green:wifi", - .gpio = OM2Pv4_GPIO_LED_GREEN, - .active_low = 1, - }, { - .name = "om2p:blue:lan", - .gpio = OM2Pv4_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "om2p:blue:wan", - .gpio = OM2Pv4_GPIO_LED_WAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button om2pv4_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = OM2P_KEYS_DEBOUNCE_INTERVAL, - .gpio = OM2Pv4_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init om2pv4_setup(void) -{ - u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000); - u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN); - u8 *art = (u8 *)KSEG1ADDR(0x1ffc0000); - u8 wmac[6]; - - ath79_register_m25p80(&om2pv4_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(om2pv4_leds_gpio), - om2pv4_leds_gpio); - ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL, - ARRAY_SIZE(om2pv4_gpio_keys), - om2pv4_gpio_keys); - - ath79_init_mac(wmac, art, 0x02); - ath79_register_wmac(art + OM2P_WMAC_CALDATA_OFFSET, wmac); - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_mdio(0, 0x0); - - /* LAN */ - ath79_switch_data.phy4_mii_en = 1; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.phy_mask = BIT(4); - ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); - ath79_register_eth(0); - - /* WAN */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_switch_data.phy_poll_mask |= BIT(4); - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); - ath79_register_eth(1); -} - -MIPS_MACHINE(ATH79_MACH_OM2Pv4, "OM2Pv4", "OpenMesh OM2Pv4", om2pv4_setup); -MIPS_MACHINE(ATH79_MACH_OM2P_HSv4, "OM2P-HSv4", "OpenMesh OM2P HSv4", om2pv4_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c deleted file mode 100644 index 61ff6a755d..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - * OpenMesh OM5P support - * - * Copyright (C) 2013 Marek Lindner <marek@open-mesh.com> - * Copyright (C) 2014 Sven Eckelmann <sven@open-mesh.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/i2c-algo-bit.h> -#include <linux/i2c-gpio.h> -#include <linux/platform_data/phy-at803x.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define OM5P_GPIO_LED_POWER 13 -#define OM5P_GPIO_LED_GREEN 16 -#define OM5P_GPIO_LED_RED 19 -#define OM5P_GPIO_LED_YELLOW 17 -#define OM5P_GPIO_LED_LAN 14 -#define OM5P_GPIO_LED_WAN 15 -#define OM5P_GPIO_BTN_RESET 4 -#define OM5P_GPIO_I2C_SCL 20 -#define OM5P_GPIO_I2C_SDA 21 - -#define OM5P_KEYS_POLL_INTERVAL 20 /* msecs */ -#define OM5P_KEYS_DEBOUNCE_INTERVAL (3 * OM5P_KEYS_POLL_INTERVAL) - -#define OM5P_WMAC_CALDATA_OFFSET 0x1000 -#define OM5P_PCI_CALDATA_OFFSET 0x5000 - -static struct gpio_led om5p_leds_gpio[] __initdata = { - { - .name = "om5p:blue:power", - .gpio = OM5P_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "om5p:red:wifi", - .gpio = OM5P_GPIO_LED_RED, - .active_low = 1, - }, { - .name = "om5p:yellow:wifi", - .gpio = OM5P_GPIO_LED_YELLOW, - .active_low = 1, - }, { - .name = "om5p:green:wifi", - .gpio = OM5P_GPIO_LED_GREEN, - .active_low = 1, - }, { - .name = "om5p:blue:lan", - .gpio = OM5P_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "om5p:blue:wan", - .gpio = OM5P_GPIO_LED_WAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button om5p_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = OM5P_KEYS_DEBOUNCE_INTERVAL, - .gpio = OM5P_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct flash_platform_data om5p_flash_data = { - .type = "mx25l12805d", -}; - -static void __init om5p_setup(void) -{ - u8 *art = (u8 *)KSEG1ADDR(0x1fff0000); - u8 mac[6]; - - /* make lan / wan leds software controllable */ - ath79_gpio_output_select(OM5P_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(OM5P_GPIO_LED_WAN, AR934X_GPIO_OUT_GPIO); - - ath79_register_m25p80(&om5p_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(om5p_leds_gpio), - om5p_leds_gpio); - ath79_register_gpio_keys_polled(-1, OM5P_KEYS_POLL_INTERVAL, - ARRAY_SIZE(om5p_gpio_keys), - om5p_gpio_keys); - - ath79_init_mac(mac, art, 2); - ath79_register_wmac(art + OM5P_WMAC_CALDATA_OFFSET, mac); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP); - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, art, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, art, 1); - - /* GMAC0 is connected to the PHY0 of the internal switch */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_register_eth(0); - - /* GMAC1 is connected to the internal switch */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_register_eth(1); -} - -MIPS_MACHINE(ATH79_MACH_OM5P, "OM5P", "OpenMesh OM5P", om5p_setup); - -static struct i2c_gpio_platform_data om5pan_i2c_device_platdata = { - .sda_pin = OM5P_GPIO_I2C_SDA, - .scl_pin = OM5P_GPIO_I2C_SCL, - .udelay = 10, - .sda_is_open_drain = 1, - .scl_is_open_drain = 1, -}; - -static struct platform_device om5pan_i2c_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &om5pan_i2c_device_platdata, - }, -}; - -static struct i2c_board_info om5pan_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("tmp423", 0x4c), - }, -}; - -static struct at803x_platform_data om5p_an_at803x_data = { - .disable_smarteee = 1, - .enable_rgmii_rx_delay = 1, - .enable_rgmii_tx_delay = 1, -}; - -static struct mdio_board_info om5p_an_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 7, - .platform_data = &om5p_an_at803x_data, - }, -}; - -static void __init om5p_an_setup(void) -{ - u8 *art = (u8 *)KSEG1ADDR(0x1fff0000); - u8 mac[6]; - - /* temperature sensor */ - platform_device_register(&om5pan_i2c_device); - i2c_register_board_info(0, om5pan_i2c_devs, - ARRAY_SIZE(om5pan_i2c_devs)); - - /* make lan / wan leds software controllable */ - ath79_gpio_output_select(OM5P_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(OM5P_GPIO_LED_WAN, AR934X_GPIO_OUT_GPIO); - - ath79_register_m25p80(&om5p_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(om5p_leds_gpio), - om5p_leds_gpio); - - ath79_init_mac(mac, art, 0x02); - ath79_register_wmac(art + OM5P_WMAC_CALDATA_OFFSET, mac); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); - ath79_setup_ar934x_eth_rx_delay(2, 2); - ath79_register_mdio(0, 0x0); - ath79_register_mdio(1, 0x0); - - mdiobus_register_board_info(om5p_an_mdio0_info, - ARRAY_SIZE(om5p_an_mdio0_info)); - - ath79_init_mac(ath79_eth0_data.mac_addr, art, 0x00); - ath79_init_mac(ath79_eth1_data.mac_addr, art, 0x01); - - /* GMAC0 is connected to the PHY7 */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_mask = BIT(7); - ath79_eth0_pll_data.pll_1000 = 0x02000000; - ath79_eth0_pll_data.pll_100 = 0x00000101; - ath79_eth0_pll_data.pll_10 = 0x00001313; - ath79_register_eth(0); - - /* GMAC1 is connected to the internal switch */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_register_eth(1); - - ath79_init_mac(mac, art, 0x10); - ap91_pci_init(art + OM5P_PCI_CALDATA_OFFSET, mac); -} - -MIPS_MACHINE(ATH79_MACH_OM5P_AN, "OM5P-AN", "OpenMesh OM5P AN", om5p_an_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5pac.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-om5pac.c deleted file mode 100644 index 10771ea7b1..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5pac.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * OpenMesh OM5P-AC support - * - * Copyright (C) 2013 Marek Lindner <marek@open-mesh.com> - * Copyright (C) 2014 Sven Eckelmann <sven@open-mesh.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/i2c-algo-bit.h> -#include <linux/i2c-gpio.h> -#include <linux/platform_data/phy-at803x.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define OM5PAC_GPIO_LED_POWER 18 -#define OM5PAC_GPIO_LED_GREEN 21 -#define OM5PAC_GPIO_LED_RED 23 -#define OM5PAC_GPIO_LED_YELLOW 22 -#define OM5PAC_GPIO_LED_LAN 20 -#define OM5PAC_GPIO_LED_WAN 19 -#define OM5PAC_GPIO_I2C_SCL 12 -#define OM5PAC_GPIO_I2C_SDA 11 - -#define OM5PAC_KEYS_POLL_INTERVAL 20 /* msecs */ -#define OM5PAC_KEYS_DEBOUNCE_INTERVAL (3 * OM5PAC_KEYS_POLL_INTERVAL) - -#define OM5PAC_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led om5pac_leds_gpio[] __initdata = { - { - .name = "om5pac:blue:power", - .gpio = OM5PAC_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "om5pac:red:wifi", - .gpio = OM5PAC_GPIO_LED_RED, - .active_low = 1, - }, { - .name = "om5pac:yellow:wifi", - .gpio = OM5PAC_GPIO_LED_YELLOW, - .active_low = 1, - }, { - .name = "om5pac:green:wifi", - .gpio = OM5PAC_GPIO_LED_GREEN, - .active_low = 1, - }, { - .name = "om5pac:blue:lan", - .gpio = OM5PAC_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "om5pac:blue:wan", - .gpio = OM5PAC_GPIO_LED_WAN, - .active_low = 1, - } -}; - -static struct flash_platform_data om5pac_flash_data = { - .type = "mx25l12805d", -}; - -static struct i2c_gpio_platform_data om5pac_i2c_device_platdata = { - .sda_pin = OM5PAC_GPIO_I2C_SDA, - .scl_pin = OM5PAC_GPIO_I2C_SCL, - .udelay = 10, - .sda_is_open_drain = 1, - .scl_is_open_drain = 1, -}; - -static struct platform_device om5pac_i2c_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &om5pac_i2c_device_platdata, - }, -}; - -static struct i2c_board_info om5pac_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("tmp423", 0x4c), - }, -}; - -static struct at803x_platform_data om5pac_at803x_data = { - .disable_smarteee = 1, - .enable_rgmii_rx_delay = 1, - .enable_rgmii_tx_delay = 1, -}; - -static struct mdio_board_info om5pac_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 1, - .platform_data = &om5pac_at803x_data, - }, - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 2, - .platform_data = &om5pac_at803x_data, - }, -}; - -static void __init om5p_ac_setup_qca955x_eth_cfg(u32 mask, - unsigned int rxd, - unsigned int rxdv, - unsigned int txd, - unsigned int txe) -{ - void __iomem *base; - u32 t; - - base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); - - t = mask; - t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT; - t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT; - t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT; - t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT; - - __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - -static void __init om5p_ac_setup(void) -{ - u8 *art = (u8 *)KSEG1ADDR(0x1fff0000); - u8 mac[6]; - - /* temperature sensor */ - platform_device_register(&om5pac_i2c_device); - i2c_register_board_info(0, om5pac_i2c_devs, - ARRAY_SIZE(om5pac_i2c_devs)); - - ath79_gpio_output_select(OM5PAC_GPIO_LED_WAN, QCA955X_GPIO_OUT_GPIO); - - ath79_register_m25p80(&om5pac_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(om5pac_leds_gpio), - om5pac_leds_gpio); - - ath79_init_mac(mac, art, 0x02); - ath79_register_wmac(art + OM5PAC_WMAC_CALDATA_OFFSET, mac); - - om5p_ac_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0); - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(om5pac_mdio0_info, - ARRAY_SIZE(om5pac_mdio0_info)); - - ath79_init_mac(ath79_eth0_data.mac_addr, art, 0x00); - ath79_init_mac(ath79_eth1_data.mac_addr, art, 0x01); - - /* GMAC0 is connected to the PHY1 */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_mask = BIT(1); - ath79_eth0_pll_data.pll_1000 = 0x82000101; - ath79_eth0_pll_data.pll_100 = 0x80000101; - ath79_eth0_pll_data.pll_10 = 0x80001313; - ath79_register_eth(0); - - /* GMAC1 is connected to MDIO1 in SGMII mode */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth1_data.phy_mask = BIT(2); - ath79_eth1_pll_data.pll_1000 = 0x03000101; - ath79_eth1_pll_data.pll_100 = 0x80000101; - ath79_eth1_pll_data.pll_10 = 0x80001313; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_register_eth(1); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_OM5P_AC, "OM5P-AC", "OpenMesh OM5P AC", om5p_ac_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5pacv2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-om5pacv2.c deleted file mode 100644 index f72700138f..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5pacv2.c +++ /dev/null @@ -1,215 +0,0 @@ -/* - * OpenMesh OM5P-ACv2 support - * - * Copyright (C) 2013 Marek Lindner <marek@open-mesh.com> - * Copyright (C) 2014-2016 Sven Eckelmann <sven@open-mesh.com> - * Copyright (C) 2015 Open-Mesh - Jim Collar <jim.collar@eqware.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/i2c-algo-bit.h> -#include <linux/i2c-gpio.h> -#include <linux/platform_data/phy-at803x.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define OM5PACV2_GPIO_LED_POWER 14 -#define OM5PACV2_GPIO_LED_GREEN 13 -#define OM5PACV2_GPIO_LED_RED 23 -#define OM5PACV2_GPIO_LED_YELLOW 15 -#define OM5PACV2_GPIO_BTN_RESET 1 -#define OM5PACV2_GPIO_I2C_SCL 18 -#define OM5PACV2_GPIO_I2C_SDA 19 -#define OM5PACV2_GPIO_PA_DCDC 2 -#define OM5PACV2_GPIO_PA_HIGH 16 - -#define OM5PACV2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define OM5PACV2_KEYS_DEBOUNCE_INTERVAL (3 * OM5PACV2_KEYS_POLL_INTERVAL) - -#define OM5PACV2_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led om5pacv2_leds_gpio[] __initdata = { - { - .name = "om5pac:blue:power", - .gpio = OM5PACV2_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "om5pac:red:wifi", - .gpio = OM5PACV2_GPIO_LED_RED, - .active_low = 1, - }, { - .name = "om5pac:yellow:wifi", - .gpio = OM5PACV2_GPIO_LED_YELLOW, - .active_low = 1, - }, { - .name = "om5pac:green:wifi", - .gpio = OM5PACV2_GPIO_LED_GREEN, - .active_low = 1, - } -}; - -static struct gpio_keys_button om5pacv2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = OM5PACV2_KEYS_DEBOUNCE_INTERVAL, - .gpio = OM5PACV2_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct i2c_gpio_platform_data om5pacv2_i2c_device_platdata = { - .sda_pin = OM5PACV2_GPIO_I2C_SDA, - .scl_pin = OM5PACV2_GPIO_I2C_SCL, - .udelay = 10, - .sda_is_open_drain = 1, - .scl_is_open_drain = 1, -}; - -static struct platform_device om5pacv2_i2c_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &om5pacv2_i2c_device_platdata, - }, -}; - -static struct i2c_board_info om5pacv2_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("tmp423", 0x4e), - }, -}; - -static struct flash_platform_data om5pacv2_flash_data = { - .type = "mx25l12805d", -}; - -static struct at803x_platform_data om5pacv2_an_at803x_data = { - .disable_smarteee = 1, - .enable_rgmii_rx_delay = 1, - .enable_rgmii_tx_delay = 1, -}; - -static struct at803x_platform_data om5pacv2_an_at8031_data = { - .disable_smarteee = 1, - .enable_rgmii_rx_delay = 1, - .enable_rgmii_tx_delay = 1, -}; - -static struct mdio_board_info om5pacv2_an_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 4, - .platform_data = &om5pacv2_an_at803x_data, - }, - { - .bus_id = "ag71xx-mdio.1", - .mdio_addr = 1, - .platform_data = &om5pacv2_an_at8031_data, - }, -}; - -static void __init om5p_acv2_setup_qca955x_eth_cfg(u32 mask, - unsigned int rxd, - unsigned int rxdv, - unsigned int txd, - unsigned int txe) -{ - void __iomem *base; - u32 t; - - base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); - - t = mask; - t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT; - t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT; - t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT; - t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT; - - __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG); - - iounmap(base); -} - -static void __init om5p_acv2_setup(void) -{ - u8 *art = (u8 *)KSEG1ADDR(0x1fff0000); - u8 mac[6]; - - /* power amplifier high power, 4.2V at RFFM4203/4503 instead of 3.3 */ - ath79_gpio_function_enable(QCA955X_GPIO_FUNC_JTAG_DISABLE); - ath79_gpio_output_select(OM5PACV2_GPIO_PA_DCDC, QCA955X_GPIO_OUT_GPIO); - ath79_gpio_output_select(OM5PACV2_GPIO_PA_HIGH, QCA955X_GPIO_OUT_GPIO); - gpio_request_one(OM5PACV2_GPIO_PA_DCDC, GPIOF_OUT_INIT_HIGH, - "PA DC/DC"); - gpio_request_one(OM5PACV2_GPIO_PA_HIGH, GPIOF_OUT_INIT_HIGH, "PA HIGH"); - - /* temperature sensor */ - platform_device_register(&om5pacv2_i2c_device); - i2c_register_board_info(0, om5pacv2_i2c_devs, - ARRAY_SIZE(om5pacv2_i2c_devs)); - - ath79_register_m25p80(&om5pacv2_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(om5pacv2_leds_gpio), - om5pacv2_leds_gpio); - ath79_register_gpio_keys_polled(-1, OM5PACV2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(om5pacv2_gpio_keys), - om5pacv2_gpio_keys); - - ath79_init_mac(mac, art, 0x02); - ath79_register_wmac(art + OM5PACV2_WMAC_CALDATA_OFFSET, mac); - - om5p_acv2_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 2, 2, 0, 0); - ath79_register_mdio(0, 0x0); - ath79_register_mdio(1, 0x0); - - mdiobus_register_board_info(om5pacv2_an_mdio0_info, - ARRAY_SIZE(om5pacv2_an_mdio0_info)); - - ath79_init_mac(ath79_eth0_data.mac_addr, art, 0x00); - ath79_init_mac(ath79_eth1_data.mac_addr, art, 0x01); - - /* GMAC0 is connected to the PHY4 */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_pll_data.pll_1000 = 0x82000101; - ath79_eth0_pll_data.pll_100 = 0x80000101; - ath79_eth0_pll_data.pll_10 = 0x80001313; - ath79_register_eth(0); - - /* GMAC1 is connected to MDIO1 in SGMII mode */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_eth1_data.phy_mask = BIT(1); - ath79_eth1_pll_data.pll_1000 = 0x03000101; - ath79_eth1_pll_data.pll_100 = 0x80000101; - ath79_eth1_pll_data.pll_10 = 0x80001313; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_register_eth(1); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_OM5P_ACv2, "OM5P-ACv2", "OpenMesh OM5P ACv2", om5p_acv2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-omy-g1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-omy-g1.c deleted file mode 100644 index 25ca27cba8..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-omy-g1.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * OMYlink OMY-G1 board support - * - * Copyright (C) 2016 L. D. Pinney <ldpinney@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define OMY_G1_GPIO_LED_WLAN 13 -#define OMY_G1_GPIO_LED_WAN 18 -#define OMY_G1_GPIO_LED_LAN 19 - -#define OMY_G1_GPIO_USB_POWER 4 - -#define OMY_G1_GPIO_BTN_RESET 17 - -#define OMY_G1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define OMY_G1_KEYS_DEBOUNCE_INTERVAL (3 * OMY_G1_KEYS_POLL_INTERVAL) - -static const char *omy_g1_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data omy_g1_flash_data = { - .part_probes = omy_g1_part_probes, -}; - -static struct gpio_led omy_g1_leds_gpio[] __initdata = { - { - .name = "omy:green:wlan", - .gpio = OMY_G1_GPIO_LED_WLAN, - .active_low = 1, - },{ - .name = "omy:green:wan", - .gpio = OMY_G1_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "omy:green:lan", - .gpio = OMY_G1_GPIO_LED_LAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button omy_g1_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = OMY_G1_KEYS_DEBOUNCE_INTERVAL, - .gpio = OMY_G1_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init omy_g1_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE, - AR934X_GPIO_FUNC_CLK_OBS4_EN); - - ath79_register_m25p80(&omy_g1_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(omy_g1_leds_gpio), - omy_g1_leds_gpio); - - ath79_register_gpio_keys_polled(1, OMY_G1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(omy_g1_gpio_keys), - omy_g1_gpio_keys); - - ath79_gpio_output_select(OMY_G1_GPIO_USB_POWER, - AR934X_GPIO_OUT_GPIO); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP); - - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_register_eth(0); - - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_register_eth(1); - - ath79_register_wmac(ee, mac); - - ath79_gpio_output_select(OMY_G1_GPIO_USB_POWER, - AR934X_GPIO_OUT_GPIO); - - gpio_request_one(OMY_G1_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_OMY_G1, "OMY-G1", "OMYlink OMY-G1", - omy_g1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-omy-x1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-omy-x1.c deleted file mode 100644 index c99e3d7457..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-omy-x1.c +++ /dev/null @@ -1,106 +0,0 @@ -/* - * OMYlink OMY-X1 board support - * - * Copyright (C) 2016 L. D. Pinney <ldpinney@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - - - -#define OMY_X1_GPIO_LED_POWER 19 -#define OMY_X1_GPIO_LED_WAN 22 - -#define OMY_X1_GPIO_BTN_RESET 17 - -#define OMY_X1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define OMY_X1_KEYS_DEBOUNCE_INTERVAL (3 * OMY_X1_KEYS_POLL_INTERVAL) - -static const char *omy_x1_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data omy_x1_flash_data = { - .part_probes = omy_x1_part_probes, -}; - -static struct gpio_led omy_x1_leds_gpio[] __initdata = { - { - .name = "omy:green:wan", - .gpio = OMY_X1_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "omy:green:power", - .gpio = OMY_X1_GPIO_LED_POWER, - .active_low = 1, - }, -}; - -static struct gpio_keys_button omy_x1_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = OMY_X1_KEYS_DEBOUNCE_INTERVAL, - .gpio = OMY_X1_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init omy_x1_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE, - AR934X_GPIO_FUNC_CLK_OBS4_EN); - - ath79_register_m25p80(&omy_x1_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(omy_x1_leds_gpio), - omy_x1_leds_gpio); - - ath79_register_gpio_keys_polled(1, OMY_X1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(omy_x1_gpio_keys), - omy_x1_gpio_keys); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP); - - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_register_eth(0); - - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_register_eth(1); - - ath79_register_wmac(ee, mac); - -} - -MIPS_MACHINE(ATH79_MACH_OMY_X1, "OMY-X1", "OMYlink OMY-X1", - omy_x1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-onion-omega.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-onion-omega.c deleted file mode 100644 index c739840377..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-onion-omega.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * Onion Omega board support - * - * Copyright (C) 2015 Boken Lin <bl@onion.io> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define OMEGA_GPIO_LED_SYSTEM 27 -#define OMEGA_GPIO_BTN_RESET 11 - -#define OMEGA_GPIO_USB_POWER 8 - -#define OMEGA_KEYS_POLL_INTERVAL 20 /* msecs */ -#define OMEGA_KEYS_DEBOUNCE_INTERVAL (3 * OMEGA_KEYS_POLL_INTERVAL) - -static const char *omega_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data omega_flash_data = { - .part_probes = omega_part_probes, -}; - -static struct gpio_led omega_leds_gpio[] __initdata = { - { - .name = "onion:amber:system", - .gpio = OMEGA_GPIO_LED_SYSTEM, - .active_low = 1, - }, -}; - -static struct gpio_keys_button omega_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = OMEGA_KEYS_DEBOUNCE_INTERVAL, - .gpio = OMEGA_GPIO_BTN_RESET, - .active_low = 0, - } -}; - -static void __init onion_omega_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(&omega_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(omega_leds_gpio), - omega_leds_gpio); - ath79_register_gpio_keys_polled(-1, OMEGA_KEYS_POLL_INTERVAL, - ARRAY_SIZE(omega_gpio_keys), - omega_gpio_keys); - - gpio_request_one(OMEGA_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_ONION_OMEGA, "ONION-OMEGA", "Onion Omega", onion_omega_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-pb42.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-pb42.c deleted file mode 100644 index 3a350e90a1..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-pb42.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Atheros PB42 board support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -#define PB42_KEYS_POLL_INTERVAL 20 /* msecs */ -#define PB42_KEYS_DEBOUNCE_INTERVAL (3 * PB42_KEYS_POLL_INTERVAL) - -#define PB42_GPIO_BTN_SW4 8 -#define PB42_GPIO_BTN_SW5 3 - -static struct gpio_keys_button pb42_gpio_keys[] __initdata = { - { - .desc = "sw4", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL, - .gpio = PB42_GPIO_BTN_SW4, - .active_low = 1, - }, { - .desc = "sw5", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL, - .gpio = PB42_GPIO_BTN_SW5, - .active_low = 1, - } -}; - -static const char *pb42_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data pb42_flash_data = { - .part_probes = pb42_part_probes, -}; - -#define PB42_WAN_PHYMASK BIT(20) -#define PB42_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19)) -#define PB42_MDIO_PHYMASK (PB42_LAN_PHYMASK | PB42_WAN_PHYMASK) - -static void __init pb42_init(void) -{ - ath79_register_m25p80(&pb42_flash_data); - - ath79_register_mdio(0, ~PB42_MDIO_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = PB42_WAN_PHYMASK; - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.speed = SPEED_100; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_gpio_keys_polled(-1, PB42_KEYS_POLL_INTERVAL, - ARRAY_SIZE(pb42_gpio_keys), - pb42_gpio_keys); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_PB42, "PB42", "Atheros PB42", pb42_init); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-pqi-air-pen.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-pqi-air-pen.c deleted file mode 100644 index 56769bfb61..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-pqi-air-pen.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * PQI Air Pen stick support - * - * Copyright (C) 2016 YuheiOKAWA <tochiro.srchack@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. -*/ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define PQI_AIR_PEN_GPIO_LED_WLAN 0 -#define PQI_AIR_PEN_GPIO_LED_WPS 23 - -#define PQI_AIR_PEN_GPIO_BTN_WPS 22 -#define PQI_AIR_PEN_GPIO_BTN_RESET 12 - -#define PQI_AIR_PEN_KEYS_POLL_INTERVAL 20 /* msecs */ -#define PQI_AIR_PEN_KEYS_DEBOUNCE_INTERVAL (3 * PQI_AIR_PEN_KEYS_POLL_INTERVAL) - -#define PQI_AIR_PEN_WMAC_CALDATA_OFFSET 0x1000 -#define PQI_AIR_PEN_LAN_MAC_OFFSET 0x1002 -#define PQI_AIR_PEN_WMAC_MAC_OFFSET 0x1002 - -static struct gpio_led pqi_air_pen_leds_gpio[] __initdata = { - { - .name = "pqi-air-pen:blue:wlan", - .gpio = PQI_AIR_PEN_GPIO_LED_WLAN, - .active_low = 0, - }, - { - .name = "pqi-air-pen:blue:wps", - .gpio = PQI_AIR_PEN_GPIO_LED_WPS, - .active_low = 0, - }, -}; - -static struct gpio_keys_button pqi_air_pen_gpio_keys[] __initdata = { - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = PQI_AIR_PEN_KEYS_DEBOUNCE_INTERVAL, - .gpio = PQI_AIR_PEN_GPIO_BTN_WPS, - .active_low = 0, - }, - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = PQI_AIR_PEN_KEYS_DEBOUNCE_INTERVAL, - .gpio = PQI_AIR_PEN_GPIO_BTN_RESET, - .active_low = 0, - }, -}; - -static void __init pqi_air_pen_setup(void) -{ - /* ART base address */ - u8 *art = (u8 *) KSEG1ADDR(0x9f050000); - - /* register flash. */ - ath79_register_m25p80(NULL); - - /* register wireless mac with cal data */ - ath79_register_wmac(art + PQI_AIR_PEN_WMAC_CALDATA_OFFSET, art + PQI_AIR_PEN_WMAC_MAC_OFFSET); - - /* false PHY_SWAP and PHY_ADDR_SWAP bits */ - ath79_setup_ar933x_phy4_switch(false, false); - - /* register gpio LEDs and keys */ - ath79_register_leds_gpio(-1, ARRAY_SIZE(pqi_air_pen_leds_gpio), - pqi_air_pen_leds_gpio); - ath79_register_gpio_keys_polled(-1, PQI_AIR_PEN_KEYS_POLL_INTERVAL, - ARRAY_SIZE(pqi_air_pen_gpio_keys), - pqi_air_pen_gpio_keys); - - /* enable usb */ - ath79_register_usb(); - - /* register eth0 as LAN */ - ath79_init_mac(ath79_eth0_data.mac_addr, art + PQI_AIR_PEN_LAN_MAC_OFFSET, 0); - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_PQI_AIR_PEN, "PQI-AIR-PEN", "PQI Air Pen",pqi_air_pen_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-qihoo-c301.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-qihoo-c301.c deleted file mode 100644 index a682f35e2c..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-qihoo-c301.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - * Qihoo 360 C301 board support - * - * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2014 Weijie Gao <hackpascal@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "nvram.h" - -#define QIHOO_C301_GPIO_LED_STATUS_GREEN 0 -#define QIHOO_C301_GPIO_LED_STATUS_RED 11 - -#define QIHOO_C301_GPIO_LED_WAN 1 -#define QIHOO_C301_GPIO_LED_LAN1 2 -#define QIHOO_C301_GPIO_LED_LAN2 3 -#define QIHOO_C301_GPIO_ETH_LEN_EN 18 - -#define QIHOO_C301_GPIO_BTN_RESET 16 - -#define QIHOO_C301_GPIO_USB_POWER 19 - -#define QIHOO_C301_GPIO_SPI_CS1 12 - -#define QIHOO_C301_GPIO_EXTERNAL_LNA0 14 -#define QIHOO_C301_GPIO_EXTERNAL_LNA1 15 - -#define QIHOO_C301_KEYS_POLL_INTERVAL 20 /* msecs */ -#define QIHOO_C301_KEYS_DEBOUNCE_INTERVAL \ - (3 * QIHOO_C301_KEYS_POLL_INTERVAL) - -#define QIHOO_C301_WMAC_CALDATA_OFFSET 0x1000 - -#define QIHOO_C301_NVRAM_ADDR 0x1f058010 -#define QIHOO_C301_NVRAM_SIZE 0x7ff0 - -static struct gpio_led qihoo_c301_leds_gpio[] __initdata = { - { - .name = "qihoo:green:status", - .gpio = QIHOO_C301_GPIO_LED_STATUS_GREEN, - .active_low = 1, - }, - { - .name = "qihoo:red:status", - .gpio = QIHOO_C301_GPIO_LED_STATUS_RED, - .active_low = 1, - }, -}; - -static struct gpio_keys_button qihoo_c301_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = QIHOO_C301_KEYS_DEBOUNCE_INTERVAL, - .gpio = QIHOO_C301_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct flash_platform_data flash __initdata = {NULL, NULL, 0}; - -static void qihoo_c301_get_mac(const char *name, char *mac) -{ - u8 *nvram = (u8 *) KSEG1ADDR(QIHOO_C301_NVRAM_ADDR); - int err; - - err = ath79_nvram_parse_mac_addr(nvram, QIHOO_C301_NVRAM_SIZE, - name, mac); - if (err) - pr_err("no MAC address found for %s\n", name); -} - -static void __init qihoo_c301_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 tmpmac[ETH_ALEN]; - - ath79_register_m25p80_multi(&flash); - - ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); - - ath79_gpio_output_select(QIHOO_C301_GPIO_LED_WAN, - AR934X_GPIO_OUT_LED_LINK4); - ath79_gpio_output_select(QIHOO_C301_GPIO_LED_LAN1, - AR934X_GPIO_OUT_LED_LINK1); - ath79_gpio_output_select(QIHOO_C301_GPIO_LED_LAN2, - AR934X_GPIO_OUT_LED_LINK2); - - ath79_gpio_output_select(QIHOO_C301_GPIO_SPI_CS1, - AR934X_GPIO_OUT_SPI_CS1); - - gpio_request_one(QIHOO_C301_GPIO_ETH_LEN_EN, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "Ethernet LED enable"); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(qihoo_c301_leds_gpio), - qihoo_c301_leds_gpio); - - ath79_register_gpio_keys_polled(-1, QIHOO_C301_KEYS_POLL_INTERVAL, - ARRAY_SIZE(qihoo_c301_gpio_keys), - qihoo_c301_gpio_keys); - - ath79_wmac_set_ext_lna_gpio(0, QIHOO_C301_GPIO_EXTERNAL_LNA0); - ath79_wmac_set_ext_lna_gpio(1, QIHOO_C301_GPIO_EXTERNAL_LNA1); - - qihoo_c301_get_mac("wlan24mac=", tmpmac); - ath79_register_wmac(art + QIHOO_C301_WMAC_CALDATA_OFFSET, tmpmac); - - ath79_register_pci(); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE | - AR934X_ETH_CFG_SW_PHY_SWAP); - - ath79_register_mdio(1, 0x0); - - /* LAN */ - qihoo_c301_get_mac("lanmac=", ath79_eth1_data.mac_addr); - - /* GMAC1 is connected to the internal switch */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - - ath79_register_eth(1); - - /* WAN */ - qihoo_c301_get_mac("wanmac=", ath79_eth0_data.mac_addr); - - /* GMAC0 is connected to the PHY4 of the internal switch */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(0); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - - ath79_register_eth(0); - - gpio_request_one(QIHOO_C301_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_QIHOO_C301, "QIHOO-C301", "Qihoo 360 C301", - qihoo_c301_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-r36a.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-r36a.c deleted file mode 100644 index b3493e2c42..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-r36a.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * ALFA Network R36A board support - * - * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define R36A_GPIO_LED_LAN 4 -#define R36A_GPIO_LED_STATUS 14 -#define R36A_GPIO_LED_USB 12 -#define R36A_GPIO_LED_WAN 16 -#define R36A_GPIO_LED_WLAN 15 - -#define R36A_GPIO_WDT_EN 1 -#define R36A_GPIO_WDT_IN 0 -#define R36A_GPIO_USB_PWR 3 - -#define R36A_GPIO_BTN_RESET 2 -#define R36A_GPIO_BTN_RFKILL 17 - -#define R36A_KEYS_POLL_INTERVAL 20 -#define R36A_KEYS_DEBOUNCE_INTERVAL (3 * R36A_KEYS_POLL_INTERVAL) - -#define R36A_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led r36a_leds_gpio[] __initdata = { - { - .name = "r36a:blue:lan", - .gpio = R36A_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "r36a:blue:status", - .gpio = R36A_GPIO_LED_STATUS, - .active_low = 1, - }, { - .name = "r36a:blue:usb", - .gpio = R36A_GPIO_LED_USB, - .active_low = 1, - }, { - .name = "r36a:blue:wan", - .gpio = R36A_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "r36a:blue:wlan", - .gpio = R36A_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button r36a_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = R36A_KEYS_DEBOUNCE_INTERVAL, - .gpio = R36A_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "rfkill", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = R36A_KEYS_DEBOUNCE_INTERVAL, - .gpio = R36A_GPIO_BTN_RFKILL, - .active_low = 1, - }, -}; - -static void __init r36a_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1f070000); - - ath79_register_m25p80(NULL); - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_mdio(0, 0x0); - - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = 0xf7; - - /* LAN */ - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.speed = SPEED_100; - ath79_init_mac(ath79_eth0_data.mac_addr, art, 0); - ath79_register_eth(0); - - /* WAN */ - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_init_mac(ath79_eth1_data.mac_addr, art, 1); - ath79_register_eth(1); - - /* Disable JTAG (enables GPIO0-3) */ - ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(r36a_leds_gpio), - r36a_leds_gpio); - - ath79_register_gpio_keys_polled(-1, R36A_KEYS_POLL_INTERVAL, - ARRAY_SIZE(r36a_gpio_keys), - r36a_gpio_keys); - - gpio_request_one(R36A_GPIO_WDT_IN, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "WDT input"); - - gpio_request_one(R36A_GPIO_WDT_EN, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "WDT enable"); - - gpio_request_one(R36A_GPIO_USB_PWR, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - - ath79_register_wmac(art + R36A_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_R36A, "R36A", "ALFA Network R36A", r36a_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-r602n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-r602n.c deleted file mode 100644 index 4aef0a932a..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-r602n.c +++ /dev/null @@ -1,213 +0,0 @@ -/* - * P&W (Shenzhen Progress&Win Technologies) R602N and CPE505N boards support - * - * Copyright (C) 2017 Piotr Dymacz <pepe2k@gmail.com> - * - * Based on mach-zbt-we1526.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define PW_GPIO_BTN_RESET 17 - -#define PW_KEYS_POLL_INTERVAL 20 /* msecs */ -#define PW_KEYS_DEBOUNCE_INTERVAL (3 * PW_KEYS_POLL_INTERVAL) - -#define PW_MAC0_OFFSET 0x0 -#define PW_MAC1_OFFSET 0x6 -#define PW_WMAC_CALDATA_OFFSET 0x1000 - -/* CPE505N GPIO LEDs */ -#define CPE505N_GPIO_LED_DIAG 12 -#define CPE505N_GPIO_LED_LAN 11 -#define CPE505N_GPIO_LED_STATUS 14 -#define CPE505N_GPIO_LED_WAN 4 -#define CPE505N_GPIO_LED_WLAN 15 - -static struct gpio_led cpe505n_leds_gpio[] __initdata = { - { - .name = "cpe505n:red:diag", - .gpio = CPE505N_GPIO_LED_DIAG, - .active_low = 1, - }, { - .name = "cpe505n:green:lan", - .gpio = CPE505N_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "cpe505n:green:status", - .gpio = CPE505N_GPIO_LED_STATUS, - .active_low = 1, - }, { - .name = "cpe505n:green:wan", - .gpio = CPE505N_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "cpe505n:blue:wlan", - .gpio = CPE505N_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static void __init cpe505n_gpio_setup(void) -{ - /* For LED on GPIO4 */ - ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN); - ath79_gpio_output_select(CPE505N_GPIO_LED_WAN, 0); - - ath79_gpio_direction_select(CPE505N_GPIO_LED_DIAG, true); - ath79_gpio_direction_select(CPE505N_GPIO_LED_LAN, true); - ath79_gpio_direction_select(CPE505N_GPIO_LED_STATUS, true); - ath79_gpio_direction_select(CPE505N_GPIO_LED_WAN, true); - ath79_gpio_direction_select(CPE505N_GPIO_LED_WLAN, true); - - /* Mute LEDs */ - gpio_set_value(CPE505N_GPIO_LED_DIAG, 1); - gpio_set_value(CPE505N_GPIO_LED_LAN, 1); - gpio_set_value(CPE505N_GPIO_LED_STATUS, 1); - gpio_set_value(CPE505N_GPIO_LED_WAN, 1); - gpio_set_value(CPE505N_GPIO_LED_WLAN, 1); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe505n_leds_gpio), - cpe505n_leds_gpio); -} - -/* R602N GPIO LEDs */ -#define R602N_GPIO_LED_LAN1 16 -#define R602N_GPIO_LED_LAN2 15 -#define R602N_GPIO_LED_LAN3 14 -#define R602N_GPIO_LED_LAN4 11 -#define R602N_GPIO_LED_WAN 4 -#define R602N_GPIO_LED_WLAN 12 - -static struct gpio_led r602n_leds_gpio[] __initdata = { - { - .name = "r602n:green:lan1", - .gpio = R602N_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "r602n:green:lan2", - .gpio = R602N_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "r602n:green:lan3", - .gpio = R602N_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "r602n:green:lan4", - .gpio = R602N_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "r602n:green:wan", - .gpio = R602N_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "r602n:green:wlan", - .gpio = R602N_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static void __init r602n_gpio_setup(void) -{ - /* For LED on GPIO4 */ - ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN); - ath79_gpio_output_select(R602N_GPIO_LED_WAN, 0); - - ath79_gpio_direction_select(R602N_GPIO_LED_LAN1, true); - ath79_gpio_direction_select(R602N_GPIO_LED_LAN2, true); - ath79_gpio_direction_select(R602N_GPIO_LED_LAN3, true); - ath79_gpio_direction_select(R602N_GPIO_LED_LAN4, true); - ath79_gpio_direction_select(R602N_GPIO_LED_WAN, true); - ath79_gpio_direction_select(R602N_GPIO_LED_WLAN, true); - - /* Mute LEDs */ - gpio_set_value(R602N_GPIO_LED_LAN1, 1); - gpio_set_value(R602N_GPIO_LED_LAN2, 1); - gpio_set_value(R602N_GPIO_LED_LAN3, 1); - gpio_set_value(R602N_GPIO_LED_LAN4, 1); - gpio_set_value(R602N_GPIO_LED_WAN, 1); - gpio_set_value(R602N_GPIO_LED_WLAN, 1); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(r602n_leds_gpio), - r602n_leds_gpio); -} - -static struct gpio_keys_button pw_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = PW_KEYS_DEBOUNCE_INTERVAL, - .gpio = PW_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static void __init r602n_cpe505n_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_mdio(0, 0x0); - - /* LAN */ - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_switch_data.phy_poll_mask |= BIT(4); - ath79_init_mac(ath79_eth1_data.mac_addr, art + PW_MAC1_OFFSET, 0); - ath79_register_eth(1); - - /* WAN */ - ath79_switch_data.phy4_mii_en = 1; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.speed = SPEED_100; - ath79_init_mac(ath79_eth0_data.mac_addr, art + PW_MAC0_OFFSET, 0); - ath79_register_eth(0); - - ath79_register_wmac(art + PW_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_gpio_keys_polled(-1, PW_KEYS_POLL_INTERVAL, - ARRAY_SIZE(pw_gpio_keys), - pw_gpio_keys); -} - -static void __init cpe505n_setup(void) -{ - r602n_cpe505n_setup(); - - cpe505n_gpio_setup(); -} - -static void __init r602n_setup(void) -{ - r602n_cpe505n_setup(); - - r602n_gpio_setup(); - - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_CPE505N, "CPE505N", "P&W CPE505N", cpe505n_setup); -MIPS_MACHINE(ATH79_MACH_R602N, "R602N", "P&W R602N", r602n_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-r6100.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-r6100.c deleted file mode 100644 index c1f0e2c400..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-r6100.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * NETGEAR R6100 board support - * - * Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/platform/ar934x_nfc.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-nfc.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define R6100_GPIO_LED_WLAN 0 -#define R6100_GPIO_LED_USB 11 -#define R6100_GPIO_LED_WAN_GREEN 13 -#define R6100_GPIO_LED_POWER_AMBER 14 -#define R6100_GPIO_LED_WAN_AMBER 15 -#define R6100_GPIO_LED_POWER_GREEN 17 - -#define R6100_GPIO_BTN_WIRELESS 1 -#define R6100_GPIO_BTN_WPS 3 -#define R6100_GPIO_BTN_RESET 12 - -#define R6100_GPIO_USB_POWER 16 - -#define R6100_KEYS_POLL_INTERVAL 20 /* msecs */ -#define R6100_KEYS_DEBOUNCE_INTERVAL (3 * R6100_KEYS_POLL_INTERVAL) - -static struct gpio_led r6100_leds_gpio[] __initdata = { - { - .name = "netgear:green:power", - .gpio = R6100_GPIO_LED_POWER_GREEN, - .active_low = 1, - }, - { - .name = "netgear:amber:power", - .gpio = R6100_GPIO_LED_POWER_AMBER, - .active_low = 1, - }, - { - .name = "netgear:green:wan", - .gpio = R6100_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, - { - .name = "netgear:amber:wan", - .gpio = R6100_GPIO_LED_WAN_AMBER, - .active_low = 1, - }, - { - .name = "netgear:blue:usb", - .gpio = R6100_GPIO_LED_USB, - .active_low = 1, - }, - { - .name = "netgear:blue:wlan", - .gpio = R6100_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button r6100_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = R6100_KEYS_DEBOUNCE_INTERVAL, - .gpio = R6100_GPIO_BTN_RESET, - .active_low = 0, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = R6100_KEYS_DEBOUNCE_INTERVAL, - .gpio = R6100_GPIO_BTN_WPS, - .active_low = 0, - }, - { - .desc = "RFKILL switch", - .type = EV_SW, - .code = KEY_RFKILL, - .debounce_interval = R6100_KEYS_DEBOUNCE_INTERVAL, - .gpio = R6100_GPIO_BTN_WIRELESS, - .active_low = 0, - }, -}; - -static void __init r6100_setup(void) -{ - ath79_register_leds_gpio(-1, ARRAY_SIZE(r6100_leds_gpio), - r6100_leds_gpio); - ath79_register_gpio_keys_polled(-1, R6100_KEYS_POLL_INTERVAL, - ARRAY_SIZE(r6100_gpio_keys), - r6100_gpio_keys); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP); - - ath79_register_mdio(1, 0x0); - - /* GMAC0 is connected to the PHY0 of the internal switch */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_register_eth(0); - - /* GMAC1 is connected to the internal switch */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_register_eth(1); - - gpio_request_one(R6100_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - - ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW); - ath79_register_nfc(); - - ath79_register_usb(); - - ath79_register_wmac_simple(); - - ap91_pci_init_simple(); -} - -MIPS_MACHINE(ATH79_MACH_R6100, "R6100", "NETGEAR R6100", - r6100_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c deleted file mode 100644 index 1730a29f33..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * 8devices Rambutan board support - * - * Copyright (C) 2017 Mantas Pucka <mantas@8devices.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include <linux/platform/ar934x_nfc.h> -#include <linux/ar8216_platform.h> -#include <linux/platform_data/phy-at803x.h> -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-nfc.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -static struct at803x_platform_data rambutan_ar8032_data = { - .has_reset_gpio = 1, - .reset_gpio = 17, -}; - -static struct mdio_board_info rambutan_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &rambutan_ar8032_data, - }, -}; - -static struct at803x_platform_data rambutan_ar8033_data = { - .has_reset_gpio = 1, - .override_sgmii_aneg = 1, - .reset_gpio = 23, -}; - -static struct mdio_board_info rambutan_mdio1_info[] = { - { - .bus_id = "ag71xx-mdio.1", - .mdio_addr = 0, - .platform_data = &rambutan_ar8033_data, - }, -}; - -static void __init rambutan_setup(void) -{ - ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW); - ath79_register_nfc(); - ath79_register_usb(); - ath79_register_pci(); - ath79_register_wmac_simple(); - - mdiobus_register_board_info(rambutan_mdio0_info, - ARRAY_SIZE(rambutan_mdio0_info)); - mdiobus_register_board_info(rambutan_mdio1_info, - ARRAY_SIZE(rambutan_mdio1_info)); - ath79_register_mdio(0, 0x0); - ath79_register_mdio(1, 0x0); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_register_eth(0); - - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.phy_mask = BIT(0); - ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_eth1_data.enable_sgmii_fixup = 1; - ath79_eth1_pll_data.pll_1000 = 0x17000000; - ath79_eth1_pll_data.pll_10 = 0x1313; - ath79_register_eth(1); -} - -MIPS_MACHINE(ATH79_MACH_RAMBUTAN, "RAMBUTAN", "8devices Rambutan board", - rambutan_setup); - diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c deleted file mode 100644 index aee0fb2014..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c +++ /dev/null @@ -1,406 +0,0 @@ -/* - * MikroTik RouterBOARD 2011 support - * - * Copyright (C) 2012 Stijn Tintel <stijn@linux-ipv6.be> - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#define pr_fmt(fmt) "rb2011: " fmt - -#include <linux/version.h> -#include <linux/phy.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> -#include <linux/mtd/mtd.h> -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0) -#include <linux/mtd/nand.h> -#else -#include <linux/mtd/rawnand.h> -#endif -#include <linux/mtd/partitions.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/routerboot.h> -#include <linux/gpio.h> -#include <linux/version.h> - -#include <asm/prom.h> -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-m25p80.h" -#include "dev-nfc.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "routerboot.h" - -#define RB2011_GPIO_NAND_NCE 14 -#define RB2011_GPIO_SFP_LOS 21 - -#define RB_ROUTERBOOT_OFFSET 0x0000 -#define RB_ROUTERBOOT_MIN_SIZE 0xb000 -#define RB_HARD_CFG_SIZE 0x1000 -#define RB_BIOS_OFFSET 0xd000 -#define RB_BIOS_SIZE 0x1000 -#define RB_SOFT_CFG_OFFSET 0xf000 -#define RB_SOFT_CFG_SIZE 0x1000 - -#define RB_ART_SIZE 0x10000 - -#define RB2011_FLAG_SFP BIT(0) -#define RB2011_FLAG_USB BIT(1) -#define RB2011_FLAG_WLAN BIT(2) - -static struct mtd_partition rb2011_spi_partitions[] = { - { - .name = "routerboot", - .offset = RB_ROUTERBOOT_OFFSET, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "hard_config", - .size = RB_HARD_CFG_SIZE, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "bios", - .offset = RB_BIOS_OFFSET, - .size = RB_BIOS_SIZE, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "soft_config", - .size = RB_SOFT_CFG_SIZE, - } -}; - -static void __init rb2011_init_partitions(const struct rb_info *info) -{ - rb2011_spi_partitions[0].size = info->hard_cfg_offs; - rb2011_spi_partitions[1].offset = info->hard_cfg_offs; - rb2011_spi_partitions[3].offset = info->soft_cfg_offs; -} - -static struct mtd_partition rb2011_nand_partitions[] = { - { - .name = "booter", - .offset = 0, - .size = (256 * 1024), - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .offset = (256 * 1024), - .size = (4 * 1024 * 1024) - (256 * 1024), - }, - { - .name = "ubi", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct flash_platform_data rb2011_spi_flash_data = { - .parts = rb2011_spi_partitions, - .nr_parts = ARRAY_SIZE(rb2011_spi_partitions), -}; - -static struct ar8327_pad_cfg rb2011_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL3, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0, -}; - -static struct ar8327_pad_cfg rb2011_ar8327_pad6_cfg; -static struct ar8327_sgmii_cfg rb2011_ar8327_sgmii_cfg; - -static struct ar8327_led_cfg rb2011_ar8327_led_cfg = { - .led_ctrl0 = 0xc731c731, - .led_ctrl1 = 0x00000000, - .led_ctrl2 = 0x00000000, - .led_ctrl3 = 0x0030c300, - .open_drain = false, -}; - -static const struct ar8327_led_info rb2011_ar8327_leds[] = { - AR8327_LED_INFO(PHY0_0, HW, "rb:green:eth1"), - AR8327_LED_INFO(PHY1_0, HW, "rb:green:eth2"), - AR8327_LED_INFO(PHY2_0, HW, "rb:green:eth3"), - AR8327_LED_INFO(PHY3_0, HW, "rb:green:eth4"), - AR8327_LED_INFO(PHY4_0, HW, "rb:green:eth5"), - AR8327_LED_INFO(PHY0_1, SW, "rb:green:eth6"), - AR8327_LED_INFO(PHY1_1, SW, "rb:green:eth7"), - AR8327_LED_INFO(PHY2_1, SW, "rb:green:eth8"), - AR8327_LED_INFO(PHY3_1, SW, "rb:green:eth9"), - AR8327_LED_INFO(PHY4_1, SW, "rb:green:eth10"), - AR8327_LED_INFO(PHY4_2, SW, "rb:green:usr"), -}; - -static struct ar8327_platform_data rb2011_ar8327_data = { - .pad0_cfg = &rb2011_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &rb2011_ar8327_led_cfg, - .num_leds = ARRAY_SIZE(rb2011_ar8327_leds), - .leds = rb2011_ar8327_leds, -}; - -static struct mdio_board_info rb2011_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &rb2011_ar8327_data, - }, -}; - -static void __init rb2011_wlan_init(void) -{ - char *art_buf; - u8 wlan_mac[ETH_ALEN]; - - art_buf = rb_get_wlan_data(); - if (art_buf == NULL) - return; - - ath79_init_mac(wlan_mac, ath79_mac_base, 11); - ath79_register_wmac(art_buf + 0x1000, wlan_mac); - - kfree(art_buf); -} - -static void rb2011_nand_select_chip(int chip_no) -{ - switch (chip_no) { - case 0: - gpio_set_value(RB2011_GPIO_NAND_NCE, 0); - break; - default: - gpio_set_value(RB2011_GPIO_NAND_NCE, 1); - break; - } - ndelay(500); -} - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) -static struct nand_ecclayout rb2011_nand_ecclayout = { - .eccbytes = 6, - .eccpos = { 8, 9, 10, 13, 14, 15 }, - .oobavail = 9, - .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } -}; - -#else - -static int rb2011_ooblayout_ecc(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - switch (section) { - case 0: - oobregion->offset = 8; - oobregion->length = 3; - return 0; - case 1: - oobregion->offset = 13; - oobregion->length = 3; - return 0; - default: - return -ERANGE; - } -} - -static int rb2011_ooblayout_free(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - switch (section) { - case 0: - oobregion->offset = 0; - oobregion->length = 4; - return 0; - case 1: - oobregion->offset = 4; - oobregion->length = 1; - return 0; - case 2: - oobregion->offset = 6; - oobregion->length = 2; - return 0; - case 3: - oobregion->offset = 11; - oobregion->length = 2; - return 0; - default: - return -ERANGE; - } -} - -static const struct mtd_ooblayout_ops rb2011_nand_ecclayout_ops = { - .ecc = rb2011_ooblayout_ecc, - .free = rb2011_ooblayout_free, -}; -#endif /* < 4.6 */ - -static int rb2011_nand_scan_fixup(struct mtd_info *mtd) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - struct nand_chip *chip = mtd->priv; -#else - struct nand_chip *chip = mtd_to_nand(mtd); -#endif /* < 4.6.0 */ - - if (mtd->writesize == 512) { - /* - * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot - * will not be able to find the kernel that we load. - */ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - chip->ecc.layout = &rb2011_nand_ecclayout; -#else - mtd_set_ooblayout(mtd, &rb2011_nand_ecclayout_ops); -#endif - } - - chip->options = NAND_NO_SUBPAGE_WRITE; - - return 0; -} - -static void __init rb2011_nand_init(void) -{ - gpio_request_one(RB2011_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE"); - - ath79_nfc_set_scan_fixup(rb2011_nand_scan_fixup); - ath79_nfc_set_parts(rb2011_nand_partitions, - ARRAY_SIZE(rb2011_nand_partitions)); - ath79_nfc_set_select_chip(rb2011_nand_select_chip); - ath79_nfc_set_swap_dma(true); - ath79_register_nfc(); -} - -static int rb2011_get_port_link(unsigned port) -{ - if (port != 6) - return -EINVAL; - - /* The Loss of signal line is active low */ - return !gpio_get_value(RB2011_GPIO_SFP_LOS); -} - -static void __init rb2011_sfp_init(void) -{ - gpio_request_one(RB2011_GPIO_SFP_LOS, GPIOF_IN, "SFP LOS"); - - rb2011_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII; - - rb2011_ar8327_data.pad6_cfg = &rb2011_ar8327_pad6_cfg; - - rb2011_ar8327_sgmii_cfg.sgmii_ctrl = 0xc70167d0; - rb2011_ar8327_sgmii_cfg.serdes_aen = true; - - rb2011_ar8327_data.sgmii_cfg = &rb2011_ar8327_sgmii_cfg; - - rb2011_ar8327_data.port6_cfg.force_link = 1; - rb2011_ar8327_data.port6_cfg.speed = AR8327_PORT_SPEED_1000; - rb2011_ar8327_data.port6_cfg.duplex = 1; - - rb2011_ar8327_data.get_port_link = rb2011_get_port_link; -} - -static int __init rb2011_setup(u32 flags) -{ - const struct rb_info *info; - char buf[64]; - - info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000); - if (!info) - return -ENODEV; - - scnprintf(buf, sizeof(buf), "Mikrotik RouterBOARD %s", - (info->board_name) ? info->board_name : ""); - mips_set_machine_name(buf); - - rb2011_init_partitions(info); - - ath79_register_m25p80(&rb2011_spi_flash_data); - rb2011_nand_init(); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | - AR934X_ETH_CFG_RXD_DELAY | - AR934X_ETH_CFG_SW_ONLY_MODE); - - ath79_register_mdio(1, 0x0); - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(rb2011_mdio0_info, - ARRAY_SIZE(rb2011_mdio0_info)); - - /* GMAC0 is connected to an ar8327 switch */ - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x6f000000; - - ath79_register_eth(0); - - /* GMAC1 is connected to the internal switch */ - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 5); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(1); - - if (flags & RB2011_FLAG_SFP) - rb2011_sfp_init(); - - if (flags & RB2011_FLAG_WLAN) - rb2011_wlan_init(); - - if (flags & RB2011_FLAG_USB) - ath79_register_usb(); - - return 0; -} - -static void __init rb2011l_setup(void) -{ - rb2011_setup(0); -} - -MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011L, "2011L", rb2011l_setup); - -static void __init rb2011us_setup(void) -{ - rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB); -} - -MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011US, "2011US", rb2011us_setup); - -static void __init rb2011r5_setup(void) -{ - rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB | RB2011_FLAG_WLAN); -} - -MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011R5, "2011r5", rb2011r5_setup); - -static void __init rb2011g_setup(void) -{ - rb2011_setup(RB2011_FLAG_SFP | - RB2011_FLAG_USB | - RB2011_FLAG_WLAN); -} - -MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011G, "2011G", rb2011g_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb4xx.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb4xx.c deleted file mode 100644 index edf90e1872..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb4xx.c +++ /dev/null @@ -1,465 +0,0 @@ -/* - * MikroTik RouterBOARD 4xx series support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/platform_data/mdio-gpio.h> -#include <linux/mmc/host.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/spi/mmc_spi.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/rb4xx_cpld.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -#define RB4XX_GPIO_USER_LED 4 -#define RB4XX_GPIO_RESET_SWITCH 7 - -#define RB4XX_GPIO_CPLD_BASE 32 -#define RB4XX_GPIO_CPLD_LED1 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED1) -#define RB4XX_GPIO_CPLD_LED2 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED2) -#define RB4XX_GPIO_CPLD_LED3 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED3) -#define RB4XX_GPIO_CPLD_LED4 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED4) -#define RB4XX_GPIO_CPLD_LED5 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED5) - -#define RB4XX_KEYS_POLL_INTERVAL 20 /* msecs */ -#define RB4XX_KEYS_DEBOUNCE_INTERVAL (3 * RB4XX_KEYS_POLL_INTERVAL) - -static struct gpio_led rb4xx_leds_gpio[] __initdata = { - { - .name = "rb4xx:yellow:user", - .gpio = RB4XX_GPIO_USER_LED, - .active_low = 0, - }, { - .name = "rb4xx:green:led1", - .gpio = RB4XX_GPIO_CPLD_LED1, - .active_low = 1, - }, { - .name = "rb4xx:green:led2", - .gpio = RB4XX_GPIO_CPLD_LED2, - .active_low = 1, - }, { - .name = "rb4xx:green:led3", - .gpio = RB4XX_GPIO_CPLD_LED3, - .active_low = 1, - }, { - .name = "rb4xx:green:led4", - .gpio = RB4XX_GPIO_CPLD_LED4, - .active_low = 1, - }, { - .name = "rb4xx:green:led5", - .gpio = RB4XX_GPIO_CPLD_LED5, - .active_low = 0, - }, -}; - -static struct gpio_keys_button rb4xx_gpio_keys[] __initdata = { - { - .desc = "reset_switch", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = RB4XX_KEYS_DEBOUNCE_INTERVAL, - .gpio = RB4XX_GPIO_RESET_SWITCH, - .active_low = 1, - } -}; - -static struct platform_device rb4xx_nand_device = { - .name = "rb4xx-nand", - .id = -1, -}; - -static struct ath79_pci_irq rb4xx_pci_irqs[] = { - { - .slot = 17, - .pin = 1, - .irq = ATH79_PCI_IRQ(2), - }, { - .slot = 18, - .pin = 1, - .irq = ATH79_PCI_IRQ(0), - }, { - .slot = 18, - .pin = 2, - .irq = ATH79_PCI_IRQ(1), - }, { - .slot = 19, - .pin = 1, - .irq = ATH79_PCI_IRQ(1), - }, { - .slot = 19, - .pin = 2, - .irq = ATH79_PCI_IRQ(2), - }, { - .slot = 20, - .pin = 1, - .irq = ATH79_PCI_IRQ(2), - }, { - .slot = 20, - .pin = 2, - .irq = ATH79_PCI_IRQ(0), - }, { - .slot = 21, - .pin = 1, - .irq = ATH79_PCI_IRQ(0), - }, { - .slot = 22, - .pin = 1, - .irq = ATH79_PCI_IRQ(1), - }, { - .slot = 22, - .pin = 2, - .irq = ATH79_PCI_IRQ(2), - }, { - .slot = 23, - .pin = 1, - .irq = ATH79_PCI_IRQ(2), - }, { - .slot = 23, - .pin = 2, - .irq = ATH79_PCI_IRQ(0), - } -}; - -static struct mtd_partition rb4xx_partitions[] = { - { - .name = "routerboot", - .offset = 0, - .size = 0x0b000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "hard_config", - .offset = 0x0b000, - .size = 0x01000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "bios", - .offset = 0x0d000, - .size = 0x02000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "soft_config", - .offset = 0x0f000, - .size = 0x01000, - } -}; - -static struct flash_platform_data rb4xx_flash_data = { - .type = "pm25lv512", - .parts = rb4xx_partitions, - .nr_parts = ARRAY_SIZE(rb4xx_partitions), -}; - -static struct rb4xx_cpld_platform_data rb4xx_cpld_data = { - .gpio_base = RB4XX_GPIO_CPLD_BASE, -}; - -static struct mmc_spi_platform_data rb4xx_mmc_data = { - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, -}; - -static struct spi_board_info rb4xx_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - .platform_data = &rb4xx_flash_data, - }, { - .bus_num = 0, - .chip_select = 1, - .max_speed_hz = 25000000, - .modalias = "spi-rb4xx-cpld", - .platform_data = &rb4xx_cpld_data, - } -}; - -static struct spi_board_info rb4xx_microsd_info[] = { - { - .bus_num = 0, - .chip_select = 2, - .max_speed_hz = 25000000, - .modalias = "mmc_spi", - .platform_data = &rb4xx_mmc_data, - } -}; - - -static struct resource rb4xx_spi_resources[] = { - { - .start = AR71XX_SPI_BASE, - .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device rb4xx_spi_device = { - .name = "rb4xx-spi", - .id = -1, - .resource = rb4xx_spi_resources, - .num_resources = ARRAY_SIZE(rb4xx_spi_resources), -}; - -static void __init rb4xx_generic_setup(void) -{ - ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN | - AR71XX_GPIO_FUNC_SPI_CS2_EN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio), - rb4xx_leds_gpio); - - ath79_register_gpio_keys_polled(-1, RB4XX_KEYS_POLL_INTERVAL, - ARRAY_SIZE(rb4xx_gpio_keys), - rb4xx_gpio_keys); - - spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info)); - platform_device_register(&rb4xx_spi_device); - platform_device_register(&rb4xx_nand_device); -} - -static void __init rb411_setup(void) -{ - rb4xx_generic_setup(); - spi_register_board_info(rb4xx_microsd_info, - ARRAY_SIZE(rb4xx_microsd_info)); - - ath79_register_mdio(0, 0xfffffffc); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = 0x00000003; - - ath79_register_eth(0); - - ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH", - rb411_setup); - -static void __init rb411u_setup(void) -{ - rb411_setup(); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U", - rb411u_setup); - -#define RB433_LAN_PHYMASK BIT(0) -#define RB433_WAN_PHYMASK BIT(4) -#define RB433_MDIO_PHYMASK (RB433_LAN_PHYMASK | RB433_WAN_PHYMASK) - -static void __init rb433_setup(void) -{ - rb4xx_generic_setup(); - spi_register_board_info(rb4xx_microsd_info, - ARRAY_SIZE(rb4xx_microsd_info)); - - ath79_register_mdio(0, ~RB433_MDIO_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK; - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK; - - ath79_register_eth(1); - ath79_register_eth(0); - - ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH", - rb433_setup); - -static void __init rb433u_setup(void) -{ - rb433_setup(); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH", - rb433u_setup); - -static void __init rb435g_setup(void) -{ - rb4xx_generic_setup(); - - spi_register_board_info(rb4xx_microsd_info, - ARRAY_SIZE(rb4xx_microsd_info)); - - ath79_register_mdio(0, ~RB433_MDIO_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK; - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK; - - ath79_register_eth(1); - ath79_register_eth(0); - - ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); - ath79_register_pci(); - - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_RB_435G, "435G", "MikroTik RouterBOARD 435G", - rb435g_setup); - -#define RB450_LAN_PHYMASK BIT(0) -#define RB450_WAN_PHYMASK BIT(4) -#define RB450_MDIO_PHYMASK (RB450_LAN_PHYMASK | RB450_WAN_PHYMASK) - -static void __init rb450_generic_setup(int gige) -{ - rb4xx_generic_setup(); - ath79_register_mdio(0, ~RB450_MDIO_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1); - ath79_eth0_data.phy_if_mode = (gige) ? - PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = RB450_LAN_PHYMASK; - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0); - ath79_eth1_data.phy_if_mode = (gige) ? - PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = RB450_WAN_PHYMASK; - - ath79_register_eth(1); - ath79_register_eth(0); -} - -static void __init rb450_setup(void) -{ - rb450_generic_setup(0); -} - -MIPS_MACHINE(ATH79_MACH_RB_450, "450", "MikroTik RouterBOARD 450", - rb450_setup); - -static void __init rb450g_setup(void) -{ - rb450_generic_setup(1); - spi_register_board_info(rb4xx_microsd_info, - ARRAY_SIZE(rb4xx_microsd_info)); -} - -MIPS_MACHINE(ATH79_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G", - rb450g_setup); - -static void __init rb493_setup(void) -{ - rb4xx_generic_setup(); - - ath79_register_mdio(0, 0x3fffff00); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = 0x00000001; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH", - rb493_setup); - -#define RB493G_GPIO_MDIO_MDC 7 -#define RB493G_GPIO_MDIO_DATA 8 - -#define RB493G_MDIO_PHYMASK BIT(0) - -static struct mdio_gpio_platform_data rb493g_mdio_data = { - .mdc = RB493G_GPIO_MDIO_MDC, - .mdio = RB493G_GPIO_MDIO_DATA, - - .phy_mask = ~RB493G_MDIO_PHYMASK, -}; - -static struct platform_device rb493g_mdio_device = { - .name = "mdio-gpio", - .id = -1, - .dev = { - .platform_data = &rb493g_mdio_data, - }, -}; - -static void __init rb493g_setup(void) -{ - ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN | - AR71XX_GPIO_FUNC_SPI_CS2_EN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio), - rb4xx_leds_gpio); - - spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info)); - spi_register_board_info(rb4xx_microsd_info, - ARRAY_SIZE(rb4xx_microsd_info)); - - platform_device_register(&rb4xx_spi_device); - platform_device_register(&rb4xx_nand_device); - - ath79_register_mdio(0, ~RB493G_MDIO_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = RB493G_MDIO_PHYMASK; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.mii_bus_dev = &rb493g_mdio_device.dev; - ath79_eth1_data.phy_mask = RB493G_MDIO_PHYMASK; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - platform_device_register(&rb493g_mdio_device); - - ath79_register_eth(1); - ath79_register_eth(0); - - ath79_register_usb(); - - ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_RB_493G, "493G", "MikroTik RouterBOARD 493G", - rb493g_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c deleted file mode 100644 index 0ec94a80e3..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c +++ /dev/null @@ -1,349 +0,0 @@ -/* - * MikroTik RouterBOARD 750/750GL support - * - * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/export.h> -#include <linux/pci.h> -#include <linux/ath9k_platform.h> -#include <linux/platform_device.h> -#include <linux/phy.h> -#include <linux/ar8216_platform.h> -#include <linux/rle.h> -#include <linux/routerboot.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/irq.h> -#include <asm/mach-ath79/mach-rb750.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-usb.h" -#include "dev-eth.h" -#include "machtypes.h" -#include "routerboot.h" - -static struct rb750_led_data rb750_leds[] = { - { - .name = "rb750:green:act", - .mask = RB750_LED_ACT, - .active_low = 1, - }, { - .name = "rb750:green:port1", - .mask = RB750_LED_PORT5, - .active_low = 1, - }, { - .name = "rb750:green:port2", - .mask = RB750_LED_PORT4, - .active_low = 1, - }, { - .name = "rb750:green:port3", - .mask = RB750_LED_PORT3, - .active_low = 1, - }, { - .name = "rb750:green:port4", - .mask = RB750_LED_PORT2, - .active_low = 1, - }, { - .name = "rb750:green:port5", - .mask = RB750_LED_PORT1, - .active_low = 1, - } -}; - -static struct rb750_led_data rb750gr3_leds[] = { - { - .name = "rb750:green:act", - .mask = RB7XX_LED_ACT, - .active_low = 1, - }, -}; - -static struct rb750_led_platform_data rb750_leds_data; -static struct platform_device rb750_leds_device = { - .name = "leds-rb750", - .dev = { - .platform_data = &rb750_leds_data, - } -}; - -static struct rb7xx_nand_platform_data rb750_nand_data; -static struct platform_device rb750_nand_device = { - .name = "rb750-nand", - .id = -1, - .dev = { - .platform_data = &rb750_nand_data, - } -}; - -static void rb750_latch_change(u32 mask_clr, u32 mask_set) -{ - static DEFINE_SPINLOCK(lock); - static u32 latch_set = RB750_LED_BITS | RB750_LVC573_LE; - static u32 latch_oe; - static u32 latch_clr; - unsigned long flags; - u32 t; - - spin_lock_irqsave(&lock, flags); - - if ((mask_clr & BIT(31)) != 0 && - (latch_set & RB750_LVC573_LE) == 0) { - goto unlock; - } - - latch_set = (latch_set | mask_set) & ~mask_clr; - latch_clr = (latch_clr | mask_clr) & ~mask_set; - - if (latch_oe == 0) - latch_oe = __raw_readl(ath79_gpio_base + AR71XX_GPIO_REG_OE); - - if (likely(latch_set & RB750_LVC573_LE)) { - void __iomem *base = ath79_gpio_base; - - t = __raw_readl(base + AR71XX_GPIO_REG_OE); - t |= mask_clr | latch_oe | mask_set; - - __raw_writel(t, base + AR71XX_GPIO_REG_OE); - __raw_writel(latch_clr, base + AR71XX_GPIO_REG_CLEAR); - __raw_writel(latch_set, base + AR71XX_GPIO_REG_SET); - } else if (mask_clr & RB750_LVC573_LE) { - void __iomem *base = ath79_gpio_base; - - latch_oe = __raw_readl(base + AR71XX_GPIO_REG_OE); - __raw_writel(RB750_LVC573_LE, base + AR71XX_GPIO_REG_CLEAR); - /* flush write */ - __raw_readl(base + AR71XX_GPIO_REG_CLEAR); - } - -unlock: - spin_unlock_irqrestore(&lock, flags); -} - -static void rb750_nand_enable_pins(void) -{ - rb750_latch_change(RB750_LVC573_LE, 0); - ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE, - AR724X_GPIO_FUNC_SPI_EN); -} - -static void rb750_nand_disable_pins(void) -{ - ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN, - AR724X_GPIO_FUNC_JTAG_DISABLE); - rb750_latch_change(0, RB750_LVC573_LE); -} - -static void __init rb750_setup(void) -{ - ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); - - ath79_register_mdio(0, 0x0); - - /* LAN ports */ - ath79_register_eth(1); - - /* WAN port */ - ath79_register_eth(0); - - rb750_leds_data.num_leds = ARRAY_SIZE(rb750_leds); - rb750_leds_data.leds = rb750_leds; - rb750_leds_data.latch_change = rb750_latch_change; - platform_device_register(&rb750_leds_device); - - rb750_nand_data.nce_line = RB750_NAND_NCE; - rb750_nand_data.enable_pins = rb750_nand_enable_pins; - rb750_nand_data.disable_pins = rb750_nand_disable_pins; - rb750_nand_data.latch_change = rb750_latch_change; - platform_device_register(&rb750_nand_device); - - /* USB */ - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_RB_750, "750i", "MikroTik RouterBOARD 750", - rb750_setup); - -static struct ar8327_pad_cfg rb750gr3_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_platform_data rb750gr3_ar8327_data = { - .pad0_cfg = &rb750gr3_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - } -}; - -static struct mdio_board_info rb750g3_mdio_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &rb750gr3_ar8327_data, - }, -}; - -static void rb750gr3_nand_enable_pins(void) -{ - ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE, - AR724X_GPIO_FUNC_SPI_EN | - AR724X_GPIO_FUNC_SPI_CS_EN2); -} - -static void rb750gr3_nand_disable_pins(void) -{ - ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN | - AR724X_GPIO_FUNC_SPI_CS_EN2, - AR724X_GPIO_FUNC_JTAG_DISABLE); -} - -static void rb750gr3_latch_change(u32 mask_clr, u32 mask_set) -{ - static DEFINE_SPINLOCK(lock); - static u32 latch_set = RB7XX_LED_ACT; - static u32 latch_clr; - void __iomem *base = ath79_gpio_base; - unsigned long flags; - u32 t; - - spin_lock_irqsave(&lock, flags); - - latch_set = (latch_set | mask_set) & ~mask_clr; - latch_clr = (latch_clr | mask_clr) & ~mask_set; - - mask_set = latch_set & (RB7XX_USB_POWERON | RB7XX_MONITOR); - mask_clr = latch_clr & (RB7XX_USB_POWERON | RB7XX_MONITOR); - - if ((latch_set ^ RB7XX_LED_ACT) & RB7XX_LED_ACT) { - /* enable output mode */ - t = __raw_readl(base + AR71XX_GPIO_REG_OE); - t |= RB7XX_LED_ACT; - __raw_writel(t, base + AR71XX_GPIO_REG_OE); - - mask_clr |= RB7XX_LED_ACT; - } else { - /* disable output mode */ - t = __raw_readl(base + AR71XX_GPIO_REG_OE); - t &= ~RB7XX_LED_ACT; - __raw_writel(t, base + AR71XX_GPIO_REG_OE); - } - - __raw_writel(mask_set, base + AR71XX_GPIO_REG_SET); - __raw_writel(mask_clr, base + AR71XX_GPIO_REG_CLEAR); - - spin_unlock_irqrestore(&lock, flags); -} - -static void __init rb750gr3_setup(void) -{ - ath79_register_mdio(0, 0x0); - mdiobus_register_board_info(rb750g3_mdio_info, - ARRAY_SIZE(rb750g3_mdio_info)); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_pll_data.pll_1000 = 0x62000000; - - ath79_register_eth(0); - - rb750_leds_data.num_leds = ARRAY_SIZE(rb750gr3_leds); - rb750_leds_data.leds = rb750gr3_leds; - rb750_leds_data.latch_change = rb750gr3_latch_change; - platform_device_register(&rb750_leds_device); - - rb750_nand_data.nce_line = RB7XX_NAND_NCE; - rb750_nand_data.enable_pins = rb750gr3_nand_enable_pins; - rb750_nand_data.disable_pins = rb750gr3_nand_disable_pins; - rb750_nand_data.latch_change = rb750gr3_latch_change; - platform_device_register(&rb750_nand_device); -} - -MIPS_MACHINE(ATH79_MACH_RB_750G_R3, "750Gr3", "MikroTik RouterBOARD 750GL", - rb750gr3_setup); - -#define RB751_HARDCONFIG 0x1f00b000 -#define RB751_HARDCONFIG_SIZE 0x1000 - -static void __init rb751_wlan_setup(void) -{ - u8 *hardconfig = (u8 *) KSEG1ADDR(RB751_HARDCONFIG); - struct ath9k_platform_data *wmac_data; - u16 tag_len; - u8 *tag; - u16 mac_len; - u8 *mac; - int err; - - wmac_data = ap9x_pci_get_wmac_data(0); - if (!wmac_data) { - pr_err("rb75x: unable to get address of wlan data\n"); - return; - } - - ap9x_pci_setup_wmac_led_pin(0, 9); - - err = routerboot_find_tag(hardconfig, RB751_HARDCONFIG_SIZE, - RB_ID_WLAN_DATA, &tag, &tag_len); - if (err) { - pr_err("rb75x: no calibration data found\n"); - return; - } - - err = rle_decode(tag, tag_len, (unsigned char *) wmac_data->eeprom_data, - sizeof(wmac_data->eeprom_data), NULL, NULL); - if (err) { - pr_err("rb75x: unable to decode wlan eeprom data\n"); - return; - } - - err = routerboot_find_tag(hardconfig, RB751_HARDCONFIG_SIZE, - RB_ID_MAC_ADDRESS_PACK, &mac, &mac_len); - if (err) { - pr_err("rb75x: no mac address found\n"); - return; - } - - ap91_pci_init(NULL, mac); -} - -static void __init rb751_setup(void) -{ - rb750_setup(); - ath79_register_usb(); - rb751_wlan_setup(); -} - -MIPS_MACHINE(ATH79_MACH_RB_751, "751", "MikroTik RouterBOARD 751", - rb751_setup); - -static void __init rb751g_setup(void) -{ - rb750gr3_setup(); - ath79_register_usb(); - rb751_wlan_setup(); -} - -MIPS_MACHINE(ATH79_MACH_RB_751G, "751g", "MikroTik RouterBOARD 751G", - rb751g_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c deleted file mode 100644 index 9620718962..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c +++ /dev/null @@ -1,348 +0,0 @@ -/* - * MikroTik RouterBOARD 91X support - * - * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#define pr_fmt(fmt) "rb91x: " fmt - -#include <linux/version.h> -#include <linux/phy.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/mtd/mtd.h> -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0) -#include <linux/mtd/nand.h> -#else -#include <linux/mtd/rawnand.h> -#endif -#include <linux/mtd/partitions.h> -#include <linux/spi/spi.h> -#include <linux/spi/74x164.h> -#include <linux/spi/flash.h> -#include <linux/routerboot.h> -#include <linux/gpio.h> -#include <linux/platform_data/gpio-latch.h> -#include <linux/platform_data/rb91x_nand.h> -#include <linux/platform_data/phy-at803x.h> - -#include <asm/prom.h> -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ath79_spi_platform.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-nfc.h" -#include "dev-usb.h" -#include "dev-spi.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" -#include "routerboot.h" - -#define RB_ROUTERBOOT_OFFSET 0x0000 -#define RB_ROUTERBOOT_MIN_SIZE 0xb000 -#define RB_HARD_CFG_SIZE 0x1000 -#define RB_BIOS_OFFSET 0xd000 -#define RB_BIOS_SIZE 0x1000 -#define RB_SOFT_CFG_OFFSET 0xf000 -#define RB_SOFT_CFG_SIZE 0x1000 - -#define RB91X_FLAG_USB BIT(0) -#define RB91X_FLAG_PCIE BIT(1) - -#define RB91X_LATCH_GPIO_BASE 32 -#define RB91X_LATCH_GPIO(_x) (RB91X_LATCH_GPIO_BASE + (_x)) - -#define RB91X_SSR_GPIO_BASE (RB91X_LATCH_GPIO_BASE + AR934X_GPIO_COUNT) -#define RB91X_SSR_GPIO(_x) (RB91X_SSR_GPIO_BASE + (_x)) - -#define RB91X_SSR_BIT_LED1 0 -#define RB91X_SSR_BIT_LED2 1 -#define RB91X_SSR_BIT_LED3 2 -#define RB91X_SSR_BIT_LED4 3 -#define RB91X_SSR_BIT_LED5 4 -#define RB91X_SSR_BIT_5 5 -#define RB91X_SSR_BIT_USB_POWER 6 -#define RB91X_SSR_BIT_PCIE_POWER 7 - -#define RB91X_GPIO_SSR_STROBE RB91X_LATCH_GPIO(0) -#define RB91X_GPIO_LED_POWER RB91X_LATCH_GPIO(1) -#define RB91X_GPIO_LED_USER RB91X_LATCH_GPIO(2) -#define RB91X_GPIO_NAND_READ RB91X_LATCH_GPIO(3) -#define RB91X_GPIO_NAND_RDY RB91X_LATCH_GPIO(4) -#define RB91X_GPIO_NLE RB91X_LATCH_GPIO(11) -#define RB91X_GPIO_NAND_NRW RB91X_LATCH_GPIO(12) -#define RB91X_GPIO_NAND_NCE RB91X_LATCH_GPIO(13) -#define RB91X_GPIO_NAND_CLE RB91X_LATCH_GPIO(14) -#define RB91X_GPIO_NAND_ALE RB91X_LATCH_GPIO(15) - -#define RB91X_GPIO_LED_1 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED1) -#define RB91X_GPIO_LED_2 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED2) -#define RB91X_GPIO_LED_3 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED3) -#define RB91X_GPIO_LED_4 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED4) -#define RB91X_GPIO_LED_5 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED5) -#define RB91X_GPIO_USB_POWER RB91X_SSR_GPIO(RB91X_SSR_BIT_USB_POWER) -#define RB91X_GPIO_PCIE_POWER RB91X_SSR_GPIO(RB91X_SSR_BIT_PCIE_POWER) - -struct rb_board_info { - const char *name; - u32 flags; -}; - -static struct mtd_partition rb711gr100_spi_partitions[] = { - { - .name = "routerboot", - .offset = RB_ROUTERBOOT_OFFSET, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "hard_config", - .size = RB_HARD_CFG_SIZE, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "bios", - .offset = RB_BIOS_OFFSET, - .size = RB_BIOS_SIZE, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "soft_config", - .size = RB_SOFT_CFG_SIZE, - } -}; - -static struct flash_platform_data rb711gr100_spi_flash_data = { - .parts = rb711gr100_spi_partitions, - .nr_parts = ARRAY_SIZE(rb711gr100_spi_partitions), -}; - -static int rb711gr100_gpio_latch_gpios[AR934X_GPIO_COUNT] __initdata = { - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, - 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 -}; - -static struct gpio_latch_platform_data rb711gr100_gpio_latch_data __initdata = { - .base = RB91X_LATCH_GPIO_BASE, - .num_gpios = ARRAY_SIZE(rb711gr100_gpio_latch_gpios), - .gpios = rb711gr100_gpio_latch_gpios, - .le_gpio_index = 11, - .le_active_low = true, -}; - -static struct rb91x_nand_platform_data rb711gr100_nand_data __initdata = { - .gpio_nce = RB91X_GPIO_NAND_NCE, - .gpio_ale = RB91X_GPIO_NAND_ALE, - .gpio_cle = RB91X_GPIO_NAND_CLE, - .gpio_rdy = RB91X_GPIO_NAND_RDY, - .gpio_read = RB91X_GPIO_NAND_READ, - .gpio_nrw = RB91X_GPIO_NAND_NRW, - .gpio_nle = RB91X_GPIO_NLE, -}; - -static u8 rb711gr100_ssr_initdata[] = { - BIT(RB91X_SSR_BIT_PCIE_POWER) | - BIT(RB91X_SSR_BIT_USB_POWER) | - BIT(RB91X_SSR_BIT_5) -}; - -static struct gen_74x164_chip_platform_data rb711gr100_ssr_data = { - .base = RB91X_SSR_GPIO_BASE, - .num_registers = ARRAY_SIZE(rb711gr100_ssr_initdata), - .init_data = rb711gr100_ssr_initdata, -}; - -static struct spi_board_info rb711gr100_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - .platform_data = &rb711gr100_spi_flash_data, - }, { - .bus_num = 0, - .chip_select = 1, - .max_speed_hz = 10000000, - .modalias = "74x164", - .platform_data = &rb711gr100_ssr_data, - } -}; - -static int rb711gr100_spi_cs_gpios[2] = { - -ENOENT, - RB91X_GPIO_SSR_STROBE, -}; - -static struct ath79_spi_platform_data rb711gr100_spi_data __initdata = { - .bus_num = 0, - .num_chipselect = 2, - .cs_gpios = rb711gr100_spi_cs_gpios, -}; - -static struct gpio_led rb711gr100_leds[] __initdata = { - { - .name = "rb:green:led1", - .gpio = RB91X_GPIO_LED_1, - .active_low = 0, - }, - { - .name = "rb:green:led2", - .gpio = RB91X_GPIO_LED_2, - .active_low = 0, - }, - { - .name = "rb:green:led3", - .gpio = RB91X_GPIO_LED_3, - .active_low = 0, - }, - { - .name = "rb:green:led4", - .gpio = RB91X_GPIO_LED_4, - .active_low = 0, - }, - { - .name = "rb:green:led5", - .gpio = RB91X_GPIO_LED_5, - .active_low = 0, - }, - { - .name = "rb:green:user", - .gpio = RB91X_GPIO_LED_USER, - .active_low = 0, - }, - { - .name = "rb:green:power", - .gpio = RB91X_GPIO_LED_POWER, - .active_low = 0, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, -}; - -static struct at803x_platform_data rb91x_at803x_data = { - .disable_smarteee = 1, - .enable_rgmii_rx_delay = 1, - .enable_rgmii_tx_delay = 1, -}; - -static struct mdio_board_info rb91x_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &rb91x_at803x_data, - }, -}; - -static void __init rb711gr100_init_partitions(const struct rb_info *info) -{ - rb711gr100_spi_partitions[0].size = info->hard_cfg_offs; - rb711gr100_spi_partitions[1].offset = info->hard_cfg_offs; - - rb711gr100_spi_partitions[3].offset = info->soft_cfg_offs; -} - -void __init rb711gr100_wlan_init(void) -{ - char *caldata; - u8 wlan_mac[ETH_ALEN]; - - caldata = rb_get_wlan_data(); - if (caldata == NULL) - return; - - ath79_init_mac(wlan_mac, ath79_mac_base, 1); - ath79_register_wmac(caldata + 0x1000, wlan_mac); - - kfree(caldata); -} - -#define RB_BOARD_INFO(_name, _flags) \ - { \ - .name = (_name), \ - .flags = (_flags), \ - } - -static const struct rb_board_info rb711gr100_boards[] __initconst = { - RB_BOARD_INFO("911G-2HPnD", 0), - RB_BOARD_INFO("911G-5HPnD", 0), - RB_BOARD_INFO("912UAG-2HPnD", RB91X_FLAG_USB | RB91X_FLAG_PCIE), - RB_BOARD_INFO("912UAG-5HPnD", RB91X_FLAG_USB | RB91X_FLAG_PCIE), -}; - -static u32 rb711gr100_get_flags(const struct rb_info *info) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(rb711gr100_boards); i++) { - const struct rb_board_info *bi; - - bi = &rb711gr100_boards[i]; - if (strcmp(info->board_name, bi->name) == 0) - return bi->flags; - } - - return 0; -} - -static void __init rb711gr100_setup(void) -{ - const struct rb_info *info; - char buf[64]; - u32 flags; - - info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000); - if (!info) - return; - - scnprintf(buf, sizeof(buf), "Mikrotik RouterBOARD %s", - (info->board_name) ? info->board_name : ""); - mips_set_machine_name(buf); - - rb711gr100_init_partitions(info); - ath79_register_spi(&rb711gr100_spi_data, rb711gr100_spi_info, - ARRAY_SIZE(rb711gr100_spi_info)); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | - AR934X_ETH_CFG_RXD_DELAY | - AR934X_ETH_CFG_SW_ONLY_MODE); - - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(rb91x_mdio0_info, - ARRAY_SIZE(rb91x_mdio0_info)); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_pll_data.pll_1000 = 0x02000000; - - ath79_register_eth(0); - - rb711gr100_wlan_init(); - - platform_device_register_data(NULL, "rb91x-nand", -1, - &rb711gr100_nand_data, - sizeof(rb711gr100_nand_data)); - - platform_device_register_data(NULL, "gpio-latch", -1, - &rb711gr100_gpio_latch_data, - sizeof(rb711gr100_gpio_latch_data)); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rb711gr100_leds), - rb711gr100_leds); - - flags = rb711gr100_get_flags(info); - - if (flags & RB91X_FLAG_USB) - ath79_register_usb(); - - if (flags & RB91X_FLAG_PCIE) - ath79_register_pci(); - -} - -MIPS_MACHINE_NONAME(ATH79_MACH_RB_711GR100, "711Gr100", rb711gr100_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c deleted file mode 100644 index 1c1cae1e76..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * MikroTik RouterBOARD 92X support - * - * Copyright (C) 2015 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/version.h> -#include <linux/phy.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/mtd/mtd.h> -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0) -#include <linux/mtd/nand.h> -#else -#include <linux/mtd/rawnand.h> -#endif -#include <linux/mtd/partitions.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/routerboot.h> -#include <linux/gpio.h> -#include <linux/platform_data/phy-at803x.h> -#include <linux/version.h> - -#include <asm/prom.h> -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-nfc.h" -#include "dev-usb.h" -#include "dev-spi.h" -#include "machtypes.h" -#include "pci.h" -#include "routerboot.h" - -#define RB922_GPIO_LED_USR 12 -#define RB922_GPIO_USB_POWER 13 -#define RB922_GPIO_FAN_CTRL 14 -#define RB922_GPIO_BTN_RESET 20 -#define RB922_GPIO_NAND_NCE 23 - -#define RB92X_FLAG_USB BIT(0) -#define RB92X_FLAG_USB_POWER BIT(1) -#define RB92X_FLAG_PCIE BIT(2) - -#define RB922_PHY_ADDR 4 - -#define RB922_KEYS_POLL_INTERVAL 20 /* msecs */ -#define RB922_KEYS_DEBOUNCE_INTERVAL (3 * RB922_KEYS_POLL_INTERVAL) - -#define RB_ROUTERBOOT_OFFSET 0x0000 -#define RB_ROUTERBOOT_MIN_SIZE 0xb000 -#define RB_HARD_CFG_SIZE 0x1000 -#define RB_BIOS_OFFSET 0xd000 -#define RB_BIOS_SIZE 0x1000 -#define RB_SOFT_CFG_OFFSET 0xf000 -#define RB_SOFT_CFG_SIZE 0x1000 - -struct rb_board_info { - const char *name; - u32 flags; -}; - -static struct mtd_partition rb922gs_spi_partitions[] = { - { - .name = "routerboot", - .offset = RB_ROUTERBOOT_OFFSET, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "hard_config", - .size = RB_HARD_CFG_SIZE, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "bios", - .offset = RB_BIOS_OFFSET, - .size = RB_BIOS_SIZE, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "soft_config", - .size = RB_SOFT_CFG_SIZE, - } -}; - -static void __init rb922gs_init_partitions(const struct rb_info *info) -{ - rb922gs_spi_partitions[0].size = info->hard_cfg_offs; - rb922gs_spi_partitions[1].offset = info->hard_cfg_offs; - rb922gs_spi_partitions[3].offset = info->soft_cfg_offs; -} - -static struct mtd_partition rb922gs_nand_partitions[] = { - { - .name = "booter", - .offset = 0, - .size = (256 * 1024), - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .offset = (256 * 1024), - .size = (4 * 1024 * 1024) - (256 * 1024), - }, - { - .name = "ubi", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct flash_platform_data rb922gs_spi_flash_data = { - .parts = rb922gs_spi_partitions, - .nr_parts = ARRAY_SIZE(rb922gs_spi_partitions), -}; - -static struct gpio_led rb922gs_leds[] __initdata = { - { - .name = "rb:green:user", - .gpio = RB922_GPIO_LED_USR, - .active_low = 1, - }, -}; - -static struct gpio_keys_button rb922gs_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = RB922_KEYS_DEBOUNCE_INTERVAL, - .gpio = RB922_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct at803x_platform_data rb922gs_at803x_data = { - .disable_smarteee = 1, -}; - -static struct mdio_board_info rb922gs_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = RB922_PHY_ADDR, - .platform_data = &rb922gs_at803x_data, - }, -}; - - - -static void rb922gs_nand_select_chip(int chip_no) -{ - switch (chip_no) { - case 0: - gpio_set_value(RB922_GPIO_NAND_NCE, 0); - break; - default: - gpio_set_value(RB922_GPIO_NAND_NCE, 1); - break; - } - ndelay(500); -} - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) -static struct nand_ecclayout rb922gs_nand_ecclayout = { - .eccbytes = 6, - .eccpos = { 8, 9, 10, 13, 14, 15 }, - .oobavail = 9, - .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } -}; - -#else - -static int rb922gs_ooblayout_ecc(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - switch (section) { - case 0: - oobregion->offset = 8; - oobregion->length = 3; - return 0; - case 1: - oobregion->offset = 13; - oobregion->length = 3; - return 0; - default: - return -ERANGE; - } -} - -static int rb922gs_ooblayout_free(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - switch (section) { - case 0: - oobregion->offset = 0; - oobregion->length = 4; - return 0; - case 1: - oobregion->offset = 4; - oobregion->length = 1; - return 0; - case 2: - oobregion->offset = 6; - oobregion->length = 2; - return 0; - case 3: - oobregion->offset = 11; - oobregion->length = 2; - return 0; - default: - return -ERANGE; - } -} - -static const struct mtd_ooblayout_ops rb922gs_nand_ecclayout_ops = { - .ecc = rb922gs_ooblayout_ecc, - .free = rb922gs_ooblayout_free, -}; -#endif /* < 4.6 */ - -static int rb922gs_nand_scan_fixup(struct mtd_info *mtd) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - struct nand_chip *chip = mtd->priv; -#else - struct nand_chip *chip = mtd_to_nand(mtd); -#endif /* < 4.6.0 */ - - if (mtd->writesize == 512) { - /* - * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot - * will not be able to find the kernel that we load. - */ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - chip->ecc.layout = &rb922gs_nand_ecclayout; -#else - mtd_set_ooblayout(mtd, &rb922gs_nand_ecclayout_ops); -#endif - } - - chip->options = NAND_NO_SUBPAGE_WRITE; - - return 0; -} - -static void __init rb922gs_nand_init(void) -{ - gpio_request_one(RB922_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE"); - - ath79_nfc_set_scan_fixup(rb922gs_nand_scan_fixup); - ath79_nfc_set_parts(rb922gs_nand_partitions, - ARRAY_SIZE(rb922gs_nand_partitions)); - ath79_nfc_set_select_chip(rb922gs_nand_select_chip); - ath79_nfc_set_swap_dma(true); - ath79_register_nfc(); -} - -#define RB_BOARD_INFO(_name, _flags) \ - { \ - .name = (_name), \ - .flags = (_flags), \ - } - -static const struct rb_board_info rb92x_boards[] __initconst = { - RB_BOARD_INFO("921GS-5HPacD r2", RB92X_FLAG_PCIE), - RB_BOARD_INFO("922UAGS-5HPacD", RB92X_FLAG_USB | RB92X_FLAG_USB_POWER | RB92X_FLAG_PCIE), -}; - -static u32 rb92x_get_flags(const struct rb_info *info) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(rb92x_boards); i++) { - const struct rb_board_info *bi; - - bi = &rb92x_boards[i]; - if (strcmp(info->board_name, bi->name) == 0) - return bi->flags; - } - - return 0; -} - -static void __init rb922gs_setup(void) -{ - const struct rb_info *info; - char buf[64]; - u32 flags; - - info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000); - if (!info) - return; - - scnprintf(buf, sizeof(buf), "MikroTik RouterBOARD %s", - (info->board_name) ? info->board_name : ""); - mips_set_machine_name(buf); - - rb922gs_init_partitions(info); - ath79_register_m25p80(&rb922gs_spi_flash_data); - - rb922gs_nand_init(); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(rb922gs_mdio0_info, - ARRAY_SIZE(rb922gs_mdio0_info)); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(RB922_PHY_ADDR); - if (strcmp(info->board_name, "921GS-5HPacD r2") == 0 || - strcmp(info->board_name, "922UAGS-5HPacD") == 0) - { - ath79_eth0_pll_data.pll_10 = 0xa0001313; - ath79_eth0_pll_data.pll_100 = 0xa0000101; - ath79_eth0_pll_data.pll_1000 = 0x8f000000; - } - else { - ath79_eth0_pll_data.pll_10 = 0x81001313; - ath79_eth0_pll_data.pll_100 = 0x81000101; - ath79_eth0_pll_data.pll_1000 = 0x8f000000; - } - - ath79_register_eth(0); - - flags = rb92x_get_flags(info); - - if (flags & RB92X_FLAG_USB) - ath79_register_usb(); - - if (flags & RB92X_FLAG_USB_POWER) - gpio_request_one(RB922_GPIO_USB_POWER, GPIOF_OUT_INIT_LOW | - GPIOF_EXPORT_DIR_FIXED, "USB power"); - - if (flags & RB92X_FLAG_PCIE) - ath79_register_pci(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rb922gs_leds), rb922gs_leds); - ath79_register_gpio_keys_polled(-1, RB922_KEYS_POLL_INTERVAL, - ARRAY_SIZE(rb922gs_gpio_keys), - rb922gs_gpio_keys); - - /* NOTE: - * This only supports the RB911G-5HPacD board for now. For other boards - * more devices must be registered based on the hardware options which - * can be found in the hardware configuration of RouterBOOT. - */ -} - -MIPS_MACHINE_NONAME(ATH79_MACH_RB_922GS, "922gs", rb922gs_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c deleted file mode 100644 index c4cf5f12a8..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c +++ /dev/null @@ -1,327 +0,0 @@ -/* - * MikroTik RouterBOARD 95X support - * - * Copyright (C) 2012 Stijn Tintel <stijn@linux-ipv6.be> - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2013 Kamil Trzcinski <ayufan@ayufan.eu> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#define pr_fmt(fmt) "rb95x: " fmt - -#include <linux/version.h> -#include <linux/phy.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> -#include <linux/mtd/mtd.h> -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0) -#include <linux/mtd/nand.h> -#else -#include <linux/mtd/rawnand.h> -#endif -#include <linux/mtd/partitions.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/routerboot.h> -#include <linux/gpio.h> -#include <linux/version.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-m25p80.h" -#include "dev-nfc.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "routerboot.h" -#include "dev-leds-gpio.h" - -#define RB95X_GPIO_NAND_NCE 14 - -static struct mtd_partition rb95x_nand_partitions[] = { - { - .name = "booter", - .offset = 0, - .size = (256 * 1024), - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .offset = (256 * 1024), - .size = (4 * 1024 * 1024) - (256 * 1024), - }, - { - .name = "ubi", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct gpio_led rb951ui_leds_gpio[] __initdata = { - { - .name = "rb:green:wlan", - .gpio = 11, - .active_low = 1, - }, { - .name = "rb:green:act", - .gpio = 3, - .active_low = 1, - }, { - .name = "rb:green:port1", - .gpio = 13, - .active_low = 1, - }, { - .name = "rb:green:port2", - .gpio = 12, - .active_low = 1, - }, { - .name = "rb:green:port3", - .gpio = 4, - .active_low = 1, - }, { - .name = "rb:green:port4", - .gpio = 21, - .active_low = 1, - }, { - .name = "rb:green:port5", - .gpio = 16, - .active_low = 1, - } -}; - -static struct ar8327_pad_cfg rb95x_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_platform_data rb95x_ar8327_data = { - .pad0_cfg = &rb95x_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - } -}; - -static struct mdio_board_info rb95x_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &rb95x_ar8327_data, - }, -}; - -void __init rb95x_wlan_init(void) -{ - char *art_buf; - u8 wlan_mac[ETH_ALEN]; - - art_buf = rb_get_wlan_data(); - if (art_buf == NULL) - return; - - ath79_init_mac(wlan_mac, ath79_mac_base, 11); - ath79_register_wmac(art_buf + 0x1000, wlan_mac); - - kfree(art_buf); -} - -static void rb95x_nand_select_chip(int chip_no) -{ - switch (chip_no) { - case 0: - gpio_set_value(RB95X_GPIO_NAND_NCE, 0); - break; - default: - gpio_set_value(RB95X_GPIO_NAND_NCE, 1); - break; - } - ndelay(500); -} - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) -static struct nand_ecclayout rb95x_nand_ecclayout = { - .eccbytes = 6, - .eccpos = { 8, 9, 10, 13, 14, 15 }, - .oobavail = 9, - .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } -}; - -#else - -static int rb95x_ooblayout_ecc(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - switch (section) { - case 0: - oobregion->offset = 8; - oobregion->length = 3; - return 0; - case 1: - oobregion->offset = 13; - oobregion->length = 3; - return 0; - default: - return -ERANGE; - } -} - -static int rb95x_ooblayout_free(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - switch (section) { - case 0: - oobregion->offset = 0; - oobregion->length = 4; - return 0; - case 1: - oobregion->offset = 4; - oobregion->length = 1; - return 0; - case 2: - oobregion->offset = 6; - oobregion->length = 2; - return 0; - case 3: - oobregion->offset = 11; - oobregion->length = 2; - return 0; - default: - return -ERANGE; - } -} - -static const struct mtd_ooblayout_ops rb95x_nand_ecclayout_ops = { - .ecc = rb95x_ooblayout_ecc, - .free = rb95x_ooblayout_free, -}; -#endif /* < 4.6 */ - -static int rb95x_nand_scan_fixup(struct mtd_info *mtd) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - struct nand_chip *chip = mtd->priv; -#else - struct nand_chip *chip = mtd_to_nand(mtd); -#endif /* < 4.6.0 */ - - if (mtd->writesize == 512) { - /* - * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot - * will not be able to find the kernel that we load. - */ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - chip->ecc.layout = &rb95x_nand_ecclayout; -#else - mtd_set_ooblayout(mtd, &rb95x_nand_ecclayout_ops); -#endif - } - - chip->options = NAND_NO_SUBPAGE_WRITE; - - return 0; -} - -void __init rb95x_nand_init(void) -{ - gpio_request_one(RB95X_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE"); - - ath79_nfc_set_scan_fixup(rb95x_nand_scan_fixup); - ath79_nfc_set_parts(rb95x_nand_partitions, - ARRAY_SIZE(rb95x_nand_partitions)); - ath79_nfc_set_select_chip(rb95x_nand_select_chip); - ath79_nfc_set_swap_dma(true); - ath79_register_nfc(); -} - -static int __init rb95x_setup(void) -{ - const struct rb_info *info; - - info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x10000); - if (!info) - return -EINVAL; - - rb95x_nand_init(); - - return 0; -} - -static void __init rb951g_setup(void) -{ - if (rb95x_setup()) - return; - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | - AR934X_ETH_CFG_RXD_DELAY | - AR934X_ETH_CFG_SW_ONLY_MODE); - - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(rb95x_mdio0_info, - ARRAY_SIZE(rb95x_mdio0_info)); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_pll_data.pll_1000 = 0x6f000000; - - ath79_register_eth(0); - - rb95x_wlan_init(); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_RB_951G, "951G", "MikroTik RouterBOARD 951G-2HnD", - rb951g_setup); - -static void __init rb951ui_setup(void) -{ - if (rb95x_setup()) - return; - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); - - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); - - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(4); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_register_eth(0); - - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_register_eth(1); - - gpio_request_one(20, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - - gpio_request_one(2, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "POE power"); - - rb95x_wlan_init(); - ath79_register_usb(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rb951ui_leds_gpio), - rb951ui_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_RB_951U, "951HnD", "MikroTik RouterBOARD 951Ui-2HnD", - rb951ui_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c deleted file mode 100644 index cb05c9142c..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c +++ /dev/null @@ -1,1262 +0,0 @@ -/* - * MikroTik SPI-NOR RouterBOARDs support - * - * - MikroTik RouterBOARD mAP 2nD - * - MikroTik RouterBOARD mAP L-2nD - * - MikroTik RouterBOARD 911-2Hn (911 Lite2) - * - MikroTik RouterBOARD 911-5Hn (911 Lite5) - * - MikroTik RouterBOARD 931-2nD (hAP mini) - * - MikroTik RouterBOARD 941L-2nD - * - MikroTik RouterBOARD 951Ui-2nD - * - MikroTik RouterBOARD 952Ui-5ac2nD - * - MikroTik RouterBOARD 962UiGS-5HacT2HnT - * - MikroTik RouterBOARD 750UP r2 - * - MikroTik RouterBOARD 750P-PBr2 - * - MikroTik RouterBOARD 750 r2 - * - MikroTik RouterBOARD LHG 5nD - * - MikroTik RouterBOARD wAP2nD - * - MikroTik RouterBOARD wAP G-5HacT2HnDwAP (wAP AC) - * - MikroTik RouterBOARD wAP R-2nD - * - * Preliminary support for the following hardware - * - MikroTik RouterBOARD cAP2nD - * Furthermore, the cAP lite (cAPL2nD) appears to feature the exact same - * hardware as the mAP L-2nD. It is unknown if they share the same board - * identifier. - * - * Copyright (C) 2017-2018 Thibaut VARENE <varenet@parisc-linux.org> - * Copyright (C) 2016 David Hutchison <dhutchison@bluemesh.net> - * Copyright (C) 2017 Ryan Mounce <ryan@mounce.com.au> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/platform_device.h> -#include <linux/phy.h> -#include <linux/routerboot.h> -#include <linux/gpio.h> - -#include <linux/spi/spi.h> -#include <linux/spi/74x164.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <linux/ar8216_platform.h> -#include <linux/platform_data/phy-at803x.h> -#include <linux/platform_data/mdio-gpio.h> - -#include <asm/prom.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-spi.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" -#include "routerboot.h" - -#define RBSPI_KEYS_POLL_INTERVAL 20 /* msecs */ -#define RBSPI_KEYS_DEBOUNCE_INTERVAL (3 * RBSPI_KEYS_POLL_INTERVAL) - -#define RBSPI_HAS_USB BIT(0) -#define RBSPI_HAS_WLAN0 BIT(1) -#define RBSPI_HAS_WLAN1 BIT(2) -#define RBSPI_HAS_WAN4 BIT(3) /* has WAN port on PHY4 */ -#define RBSPI_HAS_SSR BIT(4) /* has an SSR on SPI bus 0 */ -#define RBSPI_HAS_POE BIT(5) -#define RBSPI_HAS_MDIO1 BIT(6) -#define RBSPI_HAS_PCI BIT(7) - -#define RB_ROUTERBOOT_OFFSET 0x0000 -#define RB_BIOS_SIZE 0x1000 -#define RB_SOFT_CFG_SIZE 0x1000 - -/* Flash partitions indexes */ -enum { - RBSPI_PART_RBOOT, - RBSPI_PART_HCONF, - RBSPI_PART_BIOS, - RBSPI_PART_RBOOT2, - RBSPI_PART_SCONF, - RBSPI_PART_FIRMW, - RBSPI_PARTS -}; - -static struct mtd_partition rbspi_spi_partitions[RBSPI_PARTS]; - -/* - * Setup the SPI flash partition table based on initial parsing. - * The kernel can be at any aligned position and have any size. - */ -static void __init rbspi_init_partitions(const struct rb_info *info) -{ - struct mtd_partition *parts = rbspi_spi_partitions; - memset(parts, 0x0, sizeof(*parts)); - - parts[RBSPI_PART_RBOOT].name = "routerboot"; - parts[RBSPI_PART_RBOOT].offset = RB_ROUTERBOOT_OFFSET; - parts[RBSPI_PART_RBOOT].size = info->hard_cfg_offs; - parts[RBSPI_PART_RBOOT].mask_flags = MTD_WRITEABLE; - - parts[RBSPI_PART_HCONF].name = "hard_config"; - parts[RBSPI_PART_HCONF].offset = info->hard_cfg_offs; - parts[RBSPI_PART_HCONF].size = info->hard_cfg_size; - parts[RBSPI_PART_HCONF].mask_flags = MTD_WRITEABLE; - - parts[RBSPI_PART_BIOS].name = "bios"; - parts[RBSPI_PART_BIOS].offset = info->hard_cfg_offs - + info->hard_cfg_size; - parts[RBSPI_PART_BIOS].size = RB_BIOS_SIZE; - parts[RBSPI_PART_BIOS].mask_flags = MTD_WRITEABLE; - - parts[RBSPI_PART_RBOOT2].name = "routerboot2"; - parts[RBSPI_PART_RBOOT2].offset = parts[RBSPI_PART_BIOS].offset - + RB_BIOS_SIZE; - parts[RBSPI_PART_RBOOT2].size = info->soft_cfg_offs - - parts[RBSPI_PART_RBOOT2].offset; - parts[RBSPI_PART_RBOOT2].mask_flags = MTD_WRITEABLE; - - parts[RBSPI_PART_SCONF].name = "soft_config"; - parts[RBSPI_PART_SCONF].offset = info->soft_cfg_offs; - parts[RBSPI_PART_SCONF].size = RB_SOFT_CFG_SIZE; - - parts[RBSPI_PART_FIRMW].name = "firmware"; - parts[RBSPI_PART_FIRMW].offset = parts[RBSPI_PART_SCONF].offset - + parts[RBSPI_PART_SCONF].size; - parts[RBSPI_PART_FIRMW].size = MTDPART_SIZ_FULL; -} - -static struct flash_platform_data rbspi_spi_flash_data = { - .parts = rbspi_spi_partitions, - .nr_parts = ARRAY_SIZE(rbspi_spi_partitions), -}; - -/* - * Several boards only have a single reset button, use a common - * structure for that. - */ -static struct gpio_keys_button rbspi_gpio_keys_reset[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = RBSPI_KEYS_DEBOUNCE_INTERVAL, - .gpio = -ENOENT, /* filled dynamically */ - .active_low = 1, - }, -}; - -/* RB mAP L-2nD gpios */ -#define RBMAPL_GPIO_LED_POWER 17 -#define RBMAPL_GPIO_LED_USER 14 -#define RBMAPL_GPIO_LED_ETH 4 -#define RBMAPL_GPIO_LED_WLAN 11 -#define RBMAPL_GPIO_BTN_RESET 16 - -static struct gpio_led rbmapl_leds[] __initdata = { - { - .name = "rb:green:power", - .gpio = RBMAPL_GPIO_LED_POWER, - .active_low = 0, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, { - .name = "rb:green:user", - .gpio = RBMAPL_GPIO_LED_USER, - .active_low = 0, - }, { - .name = "rb:green:eth", - .gpio = RBMAPL_GPIO_LED_ETH, - .active_low = 0, - }, { - .name = "rb:green:wlan", - .gpio = RBMAPL_GPIO_LED_WLAN, - .active_low = 0, - }, -}; - -/* RB 941L-2nD gpios */ -#define RBHAPL_GPIO_LED_USER 14 -#define RBHAPL_GPIO_BTN_RESET 16 - -static struct gpio_led rbhapl_leds[] __initdata = { - { - .name = "rb:green:user", - .gpio = RBHAPL_GPIO_LED_USER, - .active_low = 1, - }, -}; - -/* common RB SSRs */ -#define RBSPI_SSR_GPIO_BASE 40 -#define RBSPI_SSR_GPIO(bit) (RBSPI_SSR_GPIO_BASE + (bit)) - -/* RB 951Ui-2nD gpios */ -#define RB952_SSR_BIT_LED_LAN1 0 -#define RB952_SSR_BIT_LED_LAN2 1 -#define RB952_SSR_BIT_LED_LAN3 2 -#define RB952_SSR_BIT_LED_LAN4 3 -#define RB952_SSR_BIT_LED_LAN5 4 -#define RB952_SSR_BIT_USB_POWER 5 -#define RB952_SSR_BIT_LED_WLAN 6 -#define RB952_GPIO_SSR_CS 11 -#define RB952_GPIO_LED_USER 4 -#define RB952_GPIO_POE_POWER 14 -#define RB952_GPIO_POE_STATUS 12 -#define RB952_GPIO_BTN_RESET 16 -#define RB952_GPIO_USB_PWROFF RBSPI_SSR_GPIO(RB952_SSR_BIT_USB_POWER) -#define RB952_GPIO_LED_LAN1 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN1) -#define RB952_GPIO_LED_LAN2 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN2) -#define RB952_GPIO_LED_LAN3 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN3) -#define RB952_GPIO_LED_LAN4 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN4) -#define RB952_GPIO_LED_LAN5 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN5) -#define RB952_GPIO_LED_WLAN RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_WLAN) - -static struct gpio_led rb952_leds[] __initdata = { - { - .name = "rb:green:user", - .gpio = RB952_GPIO_LED_USER, - .active_low = 0, - }, { - .name = "rb:blue:wlan", - .gpio = RB952_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "rb:green:port1", - .gpio = RB952_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "rb:green:port2", - .gpio = RB952_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "rb:green:port3", - .gpio = RB952_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "rb:green:port4", - .gpio = RB952_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "rb:green:port5", - .gpio = RB952_GPIO_LED_LAN5, - .active_low = 1, - }, -}; - - -/* RB 962UiGS-5HacT2HnT gpios */ -#define RB962_WIFI_LED_1 1 -#define RB962_WIFI_LED_2 2 -#define RB962_GPIO_POE_STATUS 2 -#define RB962_GPIO_POE_POWER 3 -#define RB962_GPIO_LED_USER 12 -#define RB962_GPIO_USB_PWROFF 13 -#define RB962_GPIO_BTN_RESET 20 - -static struct gpio_led rb962_leds_gpio[] __initdata = { - { - .name = "rb:green:user", - .gpio = RB962_GPIO_LED_USER, - .active_low = 1, - }, -}; - -static const struct ar8327_led_info rb962_leds_ar8327[] = { - AR8327_LED_INFO(PHY0_0, HW, "rb:green:port1"), - AR8327_LED_INFO(PHY1_0, HW, "rb:green:port2"), - AR8327_LED_INFO(PHY2_0, HW, "rb:green:port3"), - AR8327_LED_INFO(PHY3_0, HW, "rb:green:port4"), - AR8327_LED_INFO(PHY4_0, HW, "rb:green:port5"), -}; - -static struct ar8327_pad_cfg rb962_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, - .mac06_exchange_dis = true, -}; - -static struct ar8327_pad_cfg rb962_ar8327_pad6_cfg = { - /* Use SGMII interface for GMAC6 of the AR8337 switch */ - .mode = AR8327_PAD_MAC_SGMII, - .rxclk_delay_en = true, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0, -}; - -static struct ar8327_led_cfg rb962_ar8327_led_cfg = { - .led_ctrl0 = 0xc737c737, - .led_ctrl1 = 0x00000000, - .led_ctrl2 = 0x00000000, - .led_ctrl3 = 0x0030c300, - .open_drain = false, -}; - -static struct ar8327_platform_data rb962_ar8327_data = { - .pad0_cfg = &rb962_ar8327_pad0_cfg, - .pad6_cfg = &rb962_ar8327_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .port6_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &rb962_ar8327_led_cfg, - .num_leds = ARRAY_SIZE(rb962_leds_ar8327), - .leds = rb962_leds_ar8327, -}; - -static struct mdio_board_info rb962_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &rb962_ar8327_data, - }, -}; - -/* RB wAP-2nD gpios */ -#define RBWAP_GPIO_LED_USER 14 -#define RBWAP_GPIO_LED_WLAN 11 -#define RBWAP_GPIO_BTN_RESET 16 - -static struct gpio_led rbwap_leds[] __initdata = { - { - .name = "rb:green:user", - .gpio = RBWAP_GPIO_LED_USER, - .active_low = 1, - }, { - .name = "rb:green:wlan", - .gpio = RBWAP_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -/* RB cAP-2nD gpios */ -#define RBCAP_GPIO_LED_1 14 -#define RBCAP_GPIO_LED_2 12 -#define RBCAP_GPIO_LED_3 11 -#define RBCAP_GPIO_LED_4 4 -#define RBCAP_GPIO_LED_ALL 13 - -static struct gpio_led rbcap_leds[] __initdata = { - { - .name = "rb:green:rssi1", - .gpio = RBCAP_GPIO_LED_1, - .active_low = 1, - }, { - .name = "rb:green:rssi2", - .gpio = RBCAP_GPIO_LED_2, - .active_low = 1, - }, { - .name = "rb:green:rssi3", - .gpio = RBCAP_GPIO_LED_3, - .active_low = 1, - }, { - .name = "rb:green:rssi4", - .gpio = RBCAP_GPIO_LED_4, - .active_low = 1, - }, -}; - -/* RB mAP-2nD gpios */ -#define RBMAP_SSR_BIT_LED_LAN1 0 -#define RBMAP_SSR_BIT_LED_LAN2 1 -#define RBMAP_SSR_BIT_LED_POEO 2 -#define RBMAP_SSR_BIT_LED_USER 3 -#define RBMAP_SSR_BIT_LED_WLAN 4 -#define RBMAP_SSR_BIT_USB_POWER 5 -#define RBMAP_SSR_BIT_LED_APCAP 6 -#define RBMAP_GPIO_BTN_RESET 16 -#define RBMAP_GPIO_SSR_CS 11 -#define RBMAP_GPIO_LED_POWER 4 -#define RBMAP_GPIO_POE_POWER 14 -#define RBMAP_GPIO_POE_STATUS 12 -#define RBMAP_GPIO_USB_PWROFF RBSPI_SSR_GPIO(RBMAP_SSR_BIT_USB_POWER) -#define RBMAP_GPIO_LED_LAN1 RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_LAN1) -#define RBMAP_GPIO_LED_LAN2 RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_LAN2) -#define RBMAP_GPIO_LED_POEO RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_POEO) -#define RBMAP_GPIO_LED_USER RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_USER) -#define RBMAP_GPIO_LED_WLAN RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_WLAN) -#define RBMAP_GPIO_LED_APCAP RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_APCAP) - -static struct gpio_led rbmap_leds[] __initdata = { - { - .name = "rb:green:power", - .gpio = RBMAP_GPIO_LED_POWER, - .active_low = 1, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, { - .name = "rb:green:eth1", - .gpio = RBMAP_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "rb:green:eth2", - .gpio = RBMAP_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "rb:red:poe_out", - .gpio = RBMAP_GPIO_LED_POEO, - .active_low = 1, - }, { - .name = "rb:green:user", - .gpio = RBMAP_GPIO_LED_USER, - .active_low = 1, - }, { - .name = "rb:green:wlan", - .gpio = RBMAP_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "rb:green:ap_cap", - .gpio = RBMAP_GPIO_LED_APCAP, - .active_low = 1, - }, -}; - -/* RB LHG 5nD gpios */ -#define RBLHG_GPIO_LED_0 13 -#define RBLHG_GPIO_LED_1 12 -#define RBLHG_GPIO_LED_2 4 -#define RBLHG_GPIO_LED_3 21 -#define RBLHG_GPIO_LED_4 18 -#define RBLHG_GPIO_LED_ETH 14 -#define RBLHG_GPIO_LED_POWER 11 -#define RBLHG_GPIO_LED_USER 20 -#define RBLHG_GPIO_BTN_RESET 15 - -static struct gpio_led rblhg_leds[] __initdata = { - { - .name = "rb:green:rssi0", - .gpio = RBLHG_GPIO_LED_0, - .active_low = 1, - }, { - .name = "rb:green:rssi1", - .gpio = RBLHG_GPIO_LED_1, - .active_low = 1, - }, { - .name = "rb:green:rssi2", - .gpio = RBLHG_GPIO_LED_2, - .active_low = 1, - }, { - .name = "rb:green:rssi3", - .gpio = RBLHG_GPIO_LED_3, - .active_low = 1, - }, { - .name = "rb:green:rssi4", - .gpio = RBLHG_GPIO_LED_4, - .active_low = 1, - }, { - .name = "rb:green:eth", - .gpio = RBLHG_GPIO_LED_ETH, - .active_low = 1, - }, { - .name = "rb:green:user", - .gpio = RBLHG_GPIO_LED_USER, - .active_low = 1, - }, { - .name = "rb:blue:power", - .gpio = RBLHG_GPIO_LED_POWER, - .active_low = 0, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, -}; - -/* RB w APG-5HacT2HnD (wAP AC) gpios*/ -#define RBWAPGSC_WIFI_LED_1 1 -#define RBWAPGSC_WIFI_LED_2 8 -#define RBWAPGSC_WIFI_LED_3 9 -#define RBWAPGSC_GPIO_LED_POWER 16 -#define RBWAPGSC_GPIO_BTN_RESET 1 -#define RBWAPGSC_GPIO_MDIO_MDC 12 -#define RBWAPGSC_GPIO_MDIO_DATA 11 -#define RBWAPGSC_MDIO_PHYADDR 0 - -static struct gpio_led rbwapgsc_leds[] __initdata = { - { - .name = "rb:green:power", - .gpio = RBWAPGSC_GPIO_LED_POWER, - .active_low = 1, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, -}; - -static struct mdio_gpio_platform_data rbwapgsc_mdio_data = { - .mdc = RBWAPGSC_GPIO_MDIO_MDC, - .mdio = RBWAPGSC_GPIO_MDIO_DATA, - .phy_mask = ~BIT(RBWAPGSC_MDIO_PHYADDR), -}; - -static struct platform_device rbwapgsc_phy_device = { - .name = "mdio-gpio", - .id = 1, - .dev = { - .platform_data = &rbwapgsc_mdio_data - }, -}; - -static struct at803x_platform_data rbwapgsc_at803x_data = { - .override_sgmii_aneg = 1, -}; - -static struct mdio_board_info rbwapgsc_mdio_info[] = { - { - .bus_id = "gpio-1", - .mdio_addr = RBWAPGSC_MDIO_PHYADDR, - .platform_data = &rbwapgsc_at803x_data, - }, -}; - -/* RB911L GPIOs */ -#define RB911L_GPIO_BTN_RESET 15 -#define RB911L_GPIO_LED_1 13 -#define RB911L_GPIO_LED_2 12 -#define RB911L_GPIO_LED_3 4 -#define RB911L_GPIO_LED_4 21 -#define RB911L_GPIO_LED_5 18 -#define RB911L_GPIO_LED_ETH 20 -#define RB911L_GPIO_LED_POWER 11 -#define RB911L_GPIO_LED_USER 3 -#define RB911L_GPIO_PIN_HOLE 14 /* for reference, active low */ - -static struct gpio_led rb911l_leds[] __initdata = { - { - .name = "rb:green:eth", - .gpio = RB911L_GPIO_LED_ETH, - .active_low = 1, - }, { - .name = "rb:green:led1", - .gpio = RB911L_GPIO_LED_1, - .active_low = 1, - }, { - .name = "rb:green:led2", - .gpio = RB911L_GPIO_LED_2, - .active_low = 1, - }, { - .name = "rb:green:led3", - .gpio = RB911L_GPIO_LED_3, - .active_low = 1, - }, { - .name = "rb:green:led4", - .gpio = RB911L_GPIO_LED_4, - .active_low = 1, - }, { - .name = "rb:green:led5", - .gpio = RB911L_GPIO_LED_5, - .active_low = 1, - }, { - .name = "rb:green:power", - .gpio = RB911L_GPIO_LED_POWER, - .default_state = LEDS_GPIO_DEFSTATE_ON, - .active_low = 1, - .open_drain = 1, - }, { - .name = "rb:green:user", - .gpio = RB911L_GPIO_LED_USER, - .active_low = 1, - .open_drain = 1, - }, -}; - -/* RB 931-2nD gpios */ -#define RB931_GPIO_BTN_RESET 0 -#define RB931_GPIO_BTN_MODE 9 -#define RB931_GPIO_LED_USER 1 - -static struct gpio_keys_button rb931_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = RBSPI_KEYS_DEBOUNCE_INTERVAL, - .gpio = RB931_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "Mode button", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = RBSPI_KEYS_DEBOUNCE_INTERVAL, - .gpio = RB931_GPIO_BTN_MODE, - .active_low = 1, - } -}; - -static struct gpio_led rb931_leds[] __initdata = { - { - .name = "rb:green:user", - .gpio = RB931_GPIO_LED_USER, - .active_low = 1, - }, -}; - -/* RB wAP R-2nD (wAP R) gpios*/ -#define RBWAPR_GPIO_LED_USER 14 -#define RBWAPR_GPIO_LED1 12 -#define RBWAPR_GPIO_LED2 13 -#define RBWAPR_GPIO_LED3 3 -#define RBWAPR_GPIO_PCIE_PWROFF 15 -#define RBWAPR_GPIO_CONTROL 10 -#define RBWAPR_GPIO_BTN_RESET 16 - -static struct gpio_led rbwapr_leds[] __initdata = { - { - .name = "rb:green:user", - .gpio = RBWAPR_GPIO_LED_USER, - .active_low = 0, - },{ - .name = "rb:green:led1", - .gpio = RBWAPR_GPIO_LED1, - .active_low = 1, - },{ - .name = "rb:green:led2", - .gpio = RBWAPR_GPIO_LED2, - .active_low = 1, - },{ - .name = "rb:green:led3", - .gpio = RBWAPR_GPIO_LED3, - .active_low = 0, - }, -}; - - -static struct gen_74x164_chip_platform_data rbspi_ssr_data = { - .base = RBSPI_SSR_GPIO_BASE, - .num_registers = 1, -}; - -/* the spi-ath79 driver can only natively handle CS0. Other CS are bit-banged */ -static int rbspi_spi_cs_gpios[] = { - -ENOENT, /* CS0 is always -ENOENT: natively handled */ - -ENOENT, /* CS1 can be updated by the code as necessary */ -}; - -static struct ath79_spi_platform_data rbspi_ath79_spi_data = { - .bus_num = 0, - .cs_gpios = rbspi_spi_cs_gpios, -}; - -/* - * Global spi_board_info: devices that don't have an SSR only have the SPI NOR - * flash on bus0 CS0, while devices that have an SSR add it on the same bus CS1 - */ -static struct spi_board_info rbspi_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - .platform_data = &rbspi_spi_flash_data, - }, { - .bus_num = 0, - .chip_select = 1, - .max_speed_hz = 25000000, - .modalias = "74x164", - .platform_data = &rbspi_ssr_data, - } -}; - -void __init rbspi_wlan_init(int wmac_offset) -{ - char *art_buf; - u8 wlan_mac[ETH_ALEN]; - - art_buf = rb_get_wlan_data(); - if (!art_buf) - return; - - ath79_init_mac(wlan_mac, ath79_mac_base, wmac_offset); - ath79_register_wmac(art_buf + 0x1000, wlan_mac); - - kfree(art_buf); -} - -#define RBSPI_MACH_BUFLEN 64 -/* - * Common platform init routine for all SPI NOR devices. - */ -static __init const struct rb_info *rbspi_platform_setup(void) -{ - const struct rb_info *info; - char buf[RBSPI_MACH_BUFLEN] = "MikroTik "; - char *str; - int len = RBSPI_MACH_BUFLEN - strlen(buf) - 1; - - info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x20000); - if (!info) - return NULL; - - if (info->board_name) { - str = "RouterBOARD "; - if (strncmp(info->board_name, str, strlen(str))) { - strncat(buf, str, len); - len -= strlen(str); - } - strncat(buf, info->board_name, len); - } - else - strncat(buf, "UNKNOWN", len); - - mips_set_machine_name(buf); - - /* fix partitions based on flash parsing */ - rbspi_init_partitions(info); - - return info; -} - -/* - * Common peripherals init routine for all SPI NOR devices. - * Sets SPI and USB. - */ -static void __init rbspi_peripherals_setup(u32 flags) -{ - unsigned spi_n; - - if (flags & RBSPI_HAS_SSR) - spi_n = ARRAY_SIZE(rbspi_spi_info); - else - spi_n = 1; /* only one device on bus0 */ - - rbspi_ath79_spi_data.num_chipselect = spi_n; - rbspi_ath79_spi_data.cs_gpios = rbspi_spi_cs_gpios; - ath79_register_spi(&rbspi_ath79_spi_data, rbspi_spi_info, spi_n); - - if (flags & RBSPI_HAS_USB) - ath79_register_usb(); - - if (flags & RBSPI_HAS_PCI) - ath79_register_pci(); -} - -/* - * Common network init routine for all SPI NOR devices. - * Sets LAN/WAN/WLAN. - */ -static void __init rbspi_network_setup(u32 flags, int gmac1_offset, - int wmac0_offset, int wmac1_offset) -{ - /* for QCA953x that will init mdio1_device/data */ - ath79_register_mdio(0, 0x0); - if (flags & RBSPI_HAS_MDIO1) - ath79_register_mdio(1, 0x0); - - if (flags & RBSPI_HAS_WAN4) { - ath79_setup_ar934x_eth_cfg(0); - - /* set switch to oper mode 1, PHY4 connected to CPU */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask |= BIT(4); - - /* init GMAC0 connected to PHY4 at 100M */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_register_eth(0); - } else { - /* set the SoC to SW_ONLY_MODE, which connects all PHYs - * to the internal switch. - * We hijack ath79_setup_ar934x_eth_cfg() to set the switch in - * the QCA953x, this works because this configuration bit is - * the same as the AR934x. There's no equivalent function for - * QCA953x for now. */ - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); - } - - /* init GMAC1 */ - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, gmac1_offset); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_register_eth(1); - - if (flags & RBSPI_HAS_WLAN0) - rbspi_wlan_init(wmac0_offset); - - if (flags & RBSPI_HAS_WLAN1) - rbspi_wlan_init(wmac1_offset); -} - -static __init void rbspi_register_reset_button(int gpio) -{ - rbspi_gpio_keys_reset[0].gpio = gpio; - ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL, - ARRAY_SIZE(rbspi_gpio_keys_reset), - rbspi_gpio_keys_reset); -} - -/* - * Init the mAP lite hardware (QCA953x). - * The mAP L-2nD (mAP lite) has a single ethernet port, connected to PHY0. - * Trying to use GMAC0 in direct mode was unsucessful, so we're - * using SW_ONLY_MODE, which connects PHY0 to MAC1 on the internal - * switch, which is connected to GMAC1 on the SoC. GMAC0 is unused. - */ -static void __init rbmapl_setup(void) -{ - u32 flags = RBSPI_HAS_WLAN0; - - if (!rbspi_platform_setup()) - return; - - rbspi_peripherals_setup(flags); - - /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 1 */ - rbspi_network_setup(flags, 0, 1, 0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rbmapl_leds), rbmapl_leds); - - /* mAP lite has a single reset button as gpio 16 */ - rbspi_register_reset_button(RBMAPL_GPIO_BTN_RESET); - - /* clear internal multiplexing */ - ath79_gpio_output_select(RBMAPL_GPIO_LED_ETH, AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(RBMAPL_GPIO_LED_POWER, AR934X_GPIO_OUT_GPIO); -} - -/* - * Init the hAP lite hardware (QCA953x). - * The 941-2nD (hAP lite) has 4 ethernet ports, with port 2-4 - * being assigned to LAN on the casing, and port 1 being assigned - * to "internet" (WAN) on the casing. Port 1 is connected to PHY3. - * Since WAN is neither PHY0 nor PHY4, we cannot use GMAC0 with this device. - */ -static void __init rbhapl_setup(void) -{ - u32 flags = RBSPI_HAS_WLAN0; - - if (!rbspi_platform_setup()) - return; - - rbspi_peripherals_setup(flags); - - /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 4 */ - rbspi_network_setup(flags, 0, 4, 0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rbhapl_leds), rbhapl_leds); - - /* hAP lite has a single reset button as gpio 16 */ - rbspi_register_reset_button(RBHAPL_GPIO_BTN_RESET); -} - -/* - * The hAP, hAP ac lite, hEX lite and hEX PoE lite share the same platform - */ -static void __init rbspi_952_750r2_setup(u32 flags) -{ - if (flags & RBSPI_HAS_SSR) - rbspi_spi_cs_gpios[1] = RB952_GPIO_SSR_CS; - - rbspi_peripherals_setup(flags); - - /* - * GMAC1 is HW MAC + 1, WLAN0 MAC IS HW MAC + 5 (hAP), - * WLAN1 MAC IS HW MAC + 6 (hAP ac lite) - */ - rbspi_network_setup(flags, 1, 5, 6); - - if (flags & RBSPI_HAS_USB) - gpio_request_one(RB952_GPIO_USB_PWROFF, GPIOF_ACTIVE_LOW | - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power off"); - - if (flags & RBSPI_HAS_POE) - gpio_request_one(RB952_GPIO_POE_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "POE power"); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rb952_leds), rb952_leds); - - /* These devices have a single reset button as gpio 16 */ - rbspi_register_reset_button(RB952_GPIO_BTN_RESET); -} - -/* - * Init the hAP (ac lite) hardware (QCA953x). - * The 951Ui-2nD (hAP) has 5 ethernet ports, with ports 2-5 being assigned - * to LAN on the casing, and port 1 being assigned to "internet" (WAN). - * Port 1 is connected to PHY4 (the ports are labelled in reverse physical - * number), so the SoC can be set to connect GMAC0 to PHY4 and GMAC1 to the - * internal switch for the LAN ports. - * The device also has USB, PoE output and an SSR used for LED multiplexing. - * The 952Ui-5ac2nD (hAP ac lite) is nearly identical to the hAP, it adds a - * QCA9887 5GHz radio via PCI and moves 2.4GHz from WLAN0 to WLAN1. - */ -static void __init rb952_setup(void) -{ - u32 flags = RBSPI_HAS_WAN4 | RBSPI_HAS_USB | - RBSPI_HAS_SSR | RBSPI_HAS_POE; - - if (!rbspi_platform_setup()) - return; - - /* differentiate the hAP from the hAP ac lite */ - if (strstr(mips_get_machine_name(), "952Ui-5ac2nD")) - flags |= RBSPI_HAS_WLAN1 | RBSPI_HAS_PCI; - else - flags |= RBSPI_HAS_WLAN0; - - rbspi_952_750r2_setup(flags); -} - -/* - * Init the hEX (PoE) lite hardware (QCA953x). - * The 750UP r2 (hEX PoE lite) is nearly identical to the hAP, only without - * WLAN. The 750 r2 (hEX lite) is nearly identical to the 750UP r2, only - * without USB and POE. The 750P Pbr2 (Powerbox) is nearly identical to hEX PoE - * lite, only without USB. It shares the same bootloader board identifier. - */ -static void __init rb750upr2_setup(void) -{ - u32 flags = RBSPI_HAS_WAN4 | RBSPI_HAS_SSR; - - if (!rbspi_platform_setup()) - return; - - /* differentiate the hEX lite from the hEX PoE lite */ - if (strstr(mips_get_machine_name(), "750UP r2")) - flags |= RBSPI_HAS_USB | RBSPI_HAS_POE; - - /* differentiate the Powerbox from the hEX lite */ - else if (strstr(mips_get_machine_name(), "750P r2")) - flags |= RBSPI_HAS_POE; - - rbspi_952_750r2_setup(flags); -} - -/* - * Init the hAP ac / 962UiGS-5HacT2HnT hardware (QCA9558). - * The hAP ac has 5 ethernet ports provided by an AR8337 switch. Port 1 is - * assigned to WAN, ports 2-5 are assigned to LAN. Port 0 is connected to the - * SoC, ports 1-5 of the switch are connected to physical ports 1-5 in order. - * The SFP cage is not assigned by default on RouterOS. Extra work is required - * to support this interface as it is directly connected to the SoC (eth1). - * Wireless is provided by a 2.4GHz radio on the SoC (WLAN1) and a 5GHz radio - * attached via PCI (QCA9880). Red and green WLAN LEDs are populated however - * they are not attached to GPIOs, extra work is required to support these. - * PoE and USB output power control is supported. - */ -static void __init rb962_setup(void) -{ - u32 flags = RBSPI_HAS_USB | RBSPI_HAS_POE | RBSPI_HAS_PCI; - - if (!rbspi_platform_setup()) - return; - - rbspi_peripherals_setup(flags); - - /* Do not call rbspi_network_setup as we have a discrete switch chip */ - ath79_eth0_pll_data.pll_1000 = 0xae000000; - ath79_eth0_pll_data.pll_100 = 0xa0000101; - ath79_eth0_pll_data.pll_10 = 0xa0001313; - - ath79_register_mdio(0, 0x0); - mdiobus_register_board_info(rb962_mdio0_info, - ARRAY_SIZE(rb962_mdio0_info)); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_register_eth(0); - - /* WLAN1 MAC is HW MAC + 7 */ - rbspi_wlan_init(7); - - if (flags & RBSPI_HAS_USB) - gpio_request_one(RB962_GPIO_USB_PWROFF, GPIOF_ACTIVE_LOW | - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power off"); - - /* PoE output GPIO is inverted, set GPIOF_ACTIVE_LOW for consistency */ - if (flags & RBSPI_HAS_POE) - gpio_request_one(RB962_GPIO_POE_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_ACTIVE_LOW | - GPIOF_EXPORT_DIR_FIXED, - "POE power"); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rb962_leds_gpio), - rb962_leds_gpio); - - /* This device has a single reset button as gpio 20 */ - rbspi_register_reset_button(RB962_GPIO_BTN_RESET); -} - -/* - * Init the LHG hardware (AR9344). - * The LHG 5nD has a single ethernet port connected to PHY0. - * Wireless is provided via 5GHz WLAN1. - */ -static void __init rblhg_setup(void) -{ - u32 flags = RBSPI_HAS_WLAN1 | RBSPI_HAS_MDIO1; - - if (!rbspi_platform_setup()) - return; - - rbspi_peripherals_setup(flags); - - /* GMAC1 is HW MAC, WLAN1 MAC is HW MAC + 1 */ - rbspi_network_setup(flags, 0, 0, 1); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rblhg_leds), rblhg_leds); - - rbspi_register_reset_button(RBLHG_GPIO_BTN_RESET); -} - -/* - * Init the wAP hardware. - * The wAP 2nD has a single ethernet port. - */ -static void __init rbwap_setup(void) -{ - u32 flags = RBSPI_HAS_WLAN0; - - if (!rbspi_platform_setup()) - return; - - rbspi_peripherals_setup(flags); - - /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 1 */ - rbspi_network_setup(flags, 0, 1, 0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rbwap_leds), rbwap_leds); - - /* wAP has a single reset button as GPIO 16 */ - rbspi_register_reset_button(RBWAP_GPIO_BTN_RESET); -} - -/* - * Init the cAP hardware (EXPERIMENTAL). - * The cAP 2nD has a single ethernet port, and a global LED switch. - */ -static void __init rbcap_setup(void) -{ - u32 flags = RBSPI_HAS_WLAN0; - - if (!rbspi_platform_setup()) - return; - - rbspi_peripherals_setup(flags); - - /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 1 */ - rbspi_network_setup(flags, 0, 1, 0); - - gpio_request_one(RBCAP_GPIO_LED_ALL, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "LEDs enable"); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rbcap_leds), rbcap_leds); -} - -/* - * Init the mAP hardware. - * The mAP 2nD has two ethernet ports, PoE output, SSR for LED - * multiplexing and USB port. - */ -static void __init rbmap_setup(void) -{ - u32 flags = RBSPI_HAS_USB | RBSPI_HAS_WLAN0 | - RBSPI_HAS_SSR | RBSPI_HAS_POE; - - if (!rbspi_platform_setup()) - return; - - rbspi_spi_cs_gpios[1] = RBMAP_GPIO_SSR_CS; - rbspi_peripherals_setup(flags); - - /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 2 */ - rbspi_network_setup(flags, 0, 2, 0); - - if (flags & RBSPI_HAS_POE) - gpio_request_one(RBMAP_GPIO_POE_POWER, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "POE power"); - - if (flags & RBSPI_HAS_USB) - gpio_request_one(RBMAP_GPIO_USB_PWROFF, - GPIOF_OUT_INIT_HIGH | GPIOF_ACTIVE_LOW | - GPIOF_EXPORT_DIR_FIXED, - "USB power off"); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rbmap_leds), rbmap_leds); - - /* mAP 2nD has a single reset button as gpio 16 */ - rbspi_register_reset_button(RBMAP_GPIO_BTN_RESET); -} - -/* - * Init the wAPGSC (RB wAPG-5HacT2HnD // wAP AC) hardware. - * The wAPGSC has one Ethernet port via AR8033 with PoE input, dual radio (SoC - * 2.4 GHz and external QCA9880) and a ZT2046Q temperature and voltage sensor - * (currently not supported). - */ -static void __init rbwapgsc_setup(void) -{ - u32 flags = RBSPI_HAS_PCI; - - if (!rbspi_platform_setup()) - return; - - rbspi_peripherals_setup(flags); - - platform_device_register(&rbwapgsc_phy_device); - - mdiobus_register_board_info(rbwapgsc_mdio_info, - ARRAY_SIZE(rbwapgsc_mdio_info)); - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0); - ath79_eth1_data.mii_bus_dev = &rbwapgsc_phy_device.dev; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.phy_mask = BIT(RBWAPGSC_MDIO_PHYADDR); - ath79_eth1_data.enable_sgmii_fixup = 1; - ath79_eth1_pll_data.pll_1000 = 0x03000101; - ath79_eth1_pll_data.pll_100 = 0x80000101; - ath79_eth1_pll_data.pll_10 = 0x80001313; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_register_eth(1); - - rbspi_wlan_init(2); - - rbspi_register_reset_button(RBWAPGSC_GPIO_BTN_RESET); - - ath79_gpio_function_enable(QCA955X_GPIO_FUNC_JTAG_DISABLE| - QCA955X_GPIO_REG_OUT_FUNC4| - QCA955X_GPIO_REG_OUT_FUNC3); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rbwapgsc_leds), - rbwapgsc_leds); -} - -/* - * Setup the 911L hardware (AR9344). - */ -static void __init rb911l_setup(void) -{ - const struct rb_info *info; - - info = rbspi_platform_setup(); - if (!info) - return; - - if (!rb_has_hw_option(info, RB_HW_OPT_NO_NAND)) { - /* - * Old hardware revisions might be equipped with a NAND flash - * chip instead of the 16MiB SPI NOR device. Those boards are - * not supported at the moment, so throw a warning and skip - * the peripheral setup to avoid messing up the data in the - * flash chip. - */ - WARN(1, "The NAND flash on this board is not supported.\n"); - } else { - rbspi_peripherals_setup(0); - } - - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0); - - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(1); - - rbspi_wlan_init(1); - - rbspi_register_reset_button(RB911L_GPIO_BTN_RESET); - - /* Make the eth LED controllable by software. */ - ath79_gpio_output_select(RB911L_GPIO_LED_ETH, AR934X_GPIO_OUT_GPIO); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rb911l_leds), rb911l_leds); -} - -/* - * Init the hAP mini hardware (QCA953x). - * The 931-2nD (hAP mini) has 3 ethernet ports, with port 2-3 - * being assigned to LAN on the casing, and port 1 being assigned - * to "internet" (WAN) on the casing. Port 1 is connected to PHY2. - * Since WAN is neither PHY0 nor PHY4, we cannot use GMAC0 with this device. - */ -static void __init rb931_setup(void) -{ - u32 flags = RBSPI_HAS_WLAN0; - - if (!rbspi_platform_setup()) - return; - - rbspi_peripherals_setup(flags); - - /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 3 */ - rbspi_network_setup(flags, 0, 3, 0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rb931_leds), rb931_leds); - - /* hAP mini has two buttons */ - ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL, - ARRAY_SIZE(rb931_gpio_keys), - rb931_gpio_keys); -} - -/* - * Init the wAP R hardware. - * The wAP R-2nD has a single ethernet port and a mini PCIe slot. - * The OEM source shows it has usb (used over PCIe for LTE devices), - * and the 'control' GPIO is assumed to be an output pin not tied to an LED. - */ -static void __init rbwapr_setup(void) -{ - u32 flags = RBSPI_HAS_WLAN0 | RBSPI_HAS_USB | RBSPI_HAS_PCI; - - if (!rbspi_platform_setup()) - return; - - rbspi_peripherals_setup(flags); - - /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 1 */ - rbspi_network_setup(flags, 0, 1, 0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rbwapr_leds), rbwapr_leds); - - gpio_request_one(RBWAPR_GPIO_PCIE_PWROFF, GPIOF_OUT_INIT_HIGH | - GPIOF_ACTIVE_LOW | GPIOF_EXPORT_DIR_FIXED, - "PCIE power off"); - - gpio_request_one(RBWAPR_GPIO_CONTROL, GPIOF_OUT_INIT_LOW | - GPIOF_ACTIVE_LOW | GPIOF_EXPORT_DIR_FIXED, - "control"); - - rbspi_register_reset_button(RBWAPR_GPIO_BTN_RESET); -} - -MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup); -MIPS_MACHINE_NONAME(ATH79_MACH_RB_941, "H951L", rbhapl_setup); -MIPS_MACHINE_NONAME(ATH79_MACH_RB_911L, "911L", rb911l_setup); -MIPS_MACHINE_NONAME(ATH79_MACH_RB_952, "952-hb", rb952_setup); -MIPS_MACHINE_NONAME(ATH79_MACH_RB_962, "962", rb962_setup); -MIPS_MACHINE_NONAME(ATH79_MACH_RB_750UPR2, "750-hb", rb750upr2_setup); -MIPS_MACHINE_NONAME(ATH79_MACH_RB_LHG5, "lhg", rblhg_setup); -MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAP, "wap-hb", rbwap_setup); -MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAPR, "wap-lte", rbwapr_setup); -MIPS_MACHINE_NONAME(ATH79_MACH_RB_CAP, "cap-hb", rbcap_setup); -MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAP, "map2-hb", rbmap_setup); -MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAPAC, "wapg-sc", rbwapgsc_setup); -MIPS_MACHINE_NONAME(ATH79_MACH_RB_931, "931", rb931_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbsxtlite.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbsxtlite.c deleted file mode 100644 index 7eb0e54151..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbsxtlite.c +++ /dev/null @@ -1,302 +0,0 @@ -/* - * MikroTik RouterBOARD SXT Lite support - * - * Copyright (C) 2012 Stijn Tintel <stijn@linux-ipv6.be> - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2013 Vyacheslav Adamanov <adamanov@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#define pr_fmt(fmt) "sxtlite: " fmt - -#include <linux/version.h> -#include <linux/phy.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/mtd/mtd.h> -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0) -#include <linux/mtd/nand.h> -#else -#include <linux/mtd/rawnand.h> -#endif -#include <linux/mtd/partitions.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/rle.h> -#include <linux/routerboot.h> -#include <linux/gpio.h> -#include <linux/version.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-eth.h" -#include "dev-m25p80.h" -#include "dev-nfc.h" -#include "dev-wmac.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "routerboot.h" -#include <linux/ar8216_platform.h> - -#define SXTLITE_GPIO_NAND_NCE 14 -#define SXTLITE_GPIO_LED_USER 3 -#define SXTLITE_GPIO_LED_1 13 -#define SXTLITE_GPIO_LED_2 12 -#define SXTLITE_GPIO_LED_3 4 -#define SXTLITE_GPIO_LED_4 21 -#define SXTLITE_GPIO_LED_5 18 -#define SXTLITE_GPIO_LED_POWER 11 - -#define SXTLITE_GPIO_BUZZER 19 - -#define SXTLITE_GPIO_BTN_RESET 15 - -#define SXTLITE_KEYS_POLL_INTERVAL 20 -#define SXTLITE_KEYS_DEBOUNCE_INTERVAL (3 * SXTLITE_KEYS_POLL_INTERVAL) - -static struct mtd_partition rbsxtlite_nand_partitions[] = { - { - .name = "booter", - .offset = 0, - .size = (256 * 1024), - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .offset = (256 * 1024), - .size = (4 * 1024 * 1024) - (256 * 1024), - }, - { - .name = "ubi", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct gpio_led rbsxtlite_leds_gpio[] __initdata = { - { - .name = "rb:green:user", - .gpio = SXTLITE_GPIO_LED_USER, - .active_low = 1, - }, - { - .name = "rb:green:led1", - .gpio = SXTLITE_GPIO_LED_1, - .active_low = 1, - }, - { - .name = "rb:green:led2", - .gpio = SXTLITE_GPIO_LED_2, - .active_low = 1, - }, - { - .name = "rb:green:led3", - .gpio = SXTLITE_GPIO_LED_3, - .active_low = 1, - }, - { - .name = "rb:green:led4", - .gpio = SXTLITE_GPIO_LED_4, - .active_low = 1, - }, - { - .name = "rb:green:led5", - .gpio = SXTLITE_GPIO_LED_5, - .active_low = 1, - }, - { - .name = "rb:green:power", - .gpio = SXTLITE_GPIO_LED_POWER, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, -}; - -static struct gpio_keys_button rbsxtlite_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = SXTLITE_KEYS_DEBOUNCE_INTERVAL, - .gpio = SXTLITE_GPIO_BTN_RESET, - .active_low = 0, - }, -}; - -static int __init rbsxtlite_rbinfo_init(void) -{ - const struct rb_info *info; - - info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x10000); - if (!info) - return -EINVAL; - return 0; - -} - -void __init rbsxtlite_wlan_init(void) -{ - char *art_buf; - u8 wlan_mac[ETH_ALEN]; - - art_buf = rb_get_wlan_data(); - if (art_buf == NULL) - return; - - ath79_init_mac(wlan_mac, ath79_mac_base, 1); - ath79_register_wmac(art_buf + 0x1000, wlan_mac); - - kfree(art_buf); -} - -static void rbsxtlite_nand_select_chip(int chip_no) -{ - switch (chip_no) { - case 0: - gpio_set_value(SXTLITE_GPIO_NAND_NCE, 0); - break; - default: - gpio_set_value(SXTLITE_GPIO_NAND_NCE, 1); - break; - } - ndelay(500); -} - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) -static struct nand_ecclayout rbsxtlite_nand_ecclayout = { - .eccbytes = 6, - .eccpos = { 8, 9, 10, 13, 14, 15 }, - .oobavail = 9, - .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } -}; - -#else - -static int rbsxtlite_ooblayout_ecc(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - switch (section) { - case 0: - oobregion->offset = 8; - oobregion->length = 3; - return 0; - case 1: - oobregion->offset = 13; - oobregion->length = 3; - return 0; - default: - return -ERANGE; - } -} - -static int rbsxtlite_ooblayout_free(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - switch (section) { - case 0: - oobregion->offset = 0; - oobregion->length = 4; - return 0; - case 1: - oobregion->offset = 4; - oobregion->length = 1; - return 0; - case 2: - oobregion->offset = 6; - oobregion->length = 2; - return 0; - case 3: - oobregion->offset = 11; - oobregion->length = 2; - return 0; - default: - return -ERANGE; - } -} - -static const struct mtd_ooblayout_ops rbsxtlite_nand_ecclayout_ops = { - .ecc = rbsxtlite_ooblayout_ecc, - .free = rbsxtlite_ooblayout_free, -}; -#endif /* < 4.6 */ - -static int rbsxtlite_nand_scan_fixup(struct mtd_info *mtd) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - struct nand_chip *chip = mtd->priv; -#endif - - if (mtd->writesize == 512) { - /* - * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot - * will not be able to find the kernel that we load. - */ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - chip->ecc.layout = &rbsxtlite_nand_ecclayout; -#else - mtd_set_ooblayout(mtd, &rbsxtlite_nand_ecclayout_ops); -#endif - } - - return 0; -} - -void __init rbsxtlite_gpio_init(void) -{ - gpio_request_one(SXTLITE_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE"); -} - -void __init rbsxtlite_nand_init(void) -{ - ath79_nfc_set_scan_fixup(rbsxtlite_nand_scan_fixup); - ath79_nfc_set_parts(rbsxtlite_nand_partitions, - ARRAY_SIZE(rbsxtlite_nand_partitions)); - ath79_nfc_set_select_chip(rbsxtlite_nand_select_chip); - ath79_nfc_set_swap_dma(true); - ath79_register_nfc(); -} - - -static void __init rbsxtlite_setup(void) -{ - if(rbsxtlite_rbinfo_init()) - return; - rbsxtlite_nand_init(); - rbsxtlite_wlan_init(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rbsxtlite_leds_gpio), - rbsxtlite_leds_gpio); - ath79_register_gpio_keys_polled(-1, SXTLITE_KEYS_POLL_INTERVAL, - ARRAY_SIZE(rbsxtlite_gpio_keys), - rbsxtlite_gpio_keys); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); - - ath79_register_mdio(1, 0x0); - - /* GMAC0 is left unused */ - - /* GMAC1 is connected to MAC0 on the internal switch */ - /* The ethernet port connects to PHY P0, which connects to MAC1 - on the internal switch */ - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_register_eth(1); - - -} - - -MIPS_MACHINE(ATH79_MACH_RB_SXTLITE2ND, "sxt2n", "MikroTik RouterBOARD SXT Lite2", - rbsxtlite_setup); - -MIPS_MACHINE(ATH79_MACH_RB_SXTLITE5ND, "sxt5n", "MikroTik RouterBOARD SXT Lite5", - rbsxtlite_setup); - diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-re450.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-re450.c deleted file mode 100644 index 991aa1c9a9..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-re450.c +++ /dev/null @@ -1,239 +0,0 @@ -/* - * TP-LINK RE355/RE450 board support - * - * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2016 Tal Keren <kooolk@gmail.com> - * Copyright (c) 2018 Henryk Heisig <hyniu@o2.pl> - * - * Based on the Qualcomm Atheros AP135/AP136 reference board support code - * Copyright (c) 2012 Qualcomm Atheros - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_data/mdio-gpio.h> -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define RE450_GPIO_LED_SYSTEM 12 -#define RE450_GPIO_LED_WLAN2G 13 -#define RE450_GPIO_LED_WLAN5G 14 -#define RE450_GPIO_LED_LAN_DATA 17 -#define RE450_GPIO_LED_JUMPSTART 21 -#define RE450_GPIO_LED_JUMPSTART_RED 22 -#define RE450_GPIO_LED_LAN_LINK 23 - -#define RE450_GPIO_BTN_RESET 18 -#define RE450_GPIO_BTN_LED 19 -#define RE450_GPIO_BTN_JUMPSTART 20 - -#define RE450_GPIO_SMI_MDIO 1 -#define RE450_GPIO_SMI_MDC 3 - -#define RE450_LAN_PHYADDR 4 - -#define RE450_KEYS_POLL_INTERVAL 20 /* msecs */ -#define RE450_KEYS_DEBOUNCE_INTERVAL (3 * RE450_KEYS_POLL_INTERVAL) - -#define RE450_WMAC_CALDATA_OFFSET 0x1000 - -static const char *tl_re450_part_probes[] = { - "cmdlinepart", - NULL, -}; - -static struct flash_platform_data tl_re450_flash_data = { - .part_probes = tl_re450_part_probes, -}; - -static struct gpio_led re355_leds_gpio[] __initdata = { - { - .name = "re355:blue:power", - .gpio = RE450_GPIO_LED_SYSTEM, - .active_low = 1, - }, - { - .name = "re355:blue:wlan2g", - .gpio = RE450_GPIO_LED_WLAN2G, - .active_low = 1, - }, - { - .name = "re355:blue:wlan5g", - .gpio = RE450_GPIO_LED_WLAN5G, - .active_low = 1, - }, - { - .name = "re355:blue:wps", - .gpio = RE450_GPIO_LED_JUMPSTART, - }, - { - .name = "re355:red:wps", - .gpio = RE450_GPIO_LED_JUMPSTART_RED, - }, - { - .name = "re355:green:lan_data", - .gpio = RE450_GPIO_LED_LAN_DATA, - .active_low = 1, - }, - { - .name = "re355:green:lan_link", - .gpio = RE450_GPIO_LED_LAN_LINK, - .active_low = 1, - }, -}; - -static struct gpio_led re450_leds_gpio[] __initdata = { - { - .name = "re450:blue:power", - .gpio = RE450_GPIO_LED_SYSTEM, - .active_low = 1, - }, - { - .name = "re450:blue:wlan2g", - .gpio = RE450_GPIO_LED_WLAN2G, - .active_low = 1, - }, - { - .name = "re450:blue:wlan5g", - .gpio = RE450_GPIO_LED_WLAN5G, - .active_low = 1, - }, - { - .name = "re450:blue:wps", - .gpio = RE450_GPIO_LED_JUMPSTART, - }, - { - .name = "re450:red:wps", - .gpio = RE450_GPIO_LED_JUMPSTART_RED, - }, - { - .name = "re450:green:lan_data", - .gpio = RE450_GPIO_LED_LAN_DATA, - .active_low = 1, - }, - { - .name = "re450:green:lan_link", - .gpio = RE450_GPIO_LED_LAN_LINK, - .active_low = 1, - }, -}; - -static struct gpio_keys_button re450_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = RE450_KEYS_DEBOUNCE_INTERVAL, - .gpio = RE450_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = RE450_KEYS_DEBOUNCE_INTERVAL, - .gpio = RE450_GPIO_BTN_JUMPSTART, - .active_low = 1, - }, - { - .desc = "Control LED button", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = RE450_KEYS_DEBOUNCE_INTERVAL, - .gpio = RE450_GPIO_BTN_LED, - .active_low = 1, - }, -}; - -static struct mdio_gpio_platform_data re450_mdio = { - .mdc = RE450_GPIO_SMI_MDC, - .mdio = RE450_GPIO_SMI_MDIO, - .phy_mask = ~BIT(RE450_LAN_PHYADDR), -}; - -static struct platform_device re450_phy_device = { - .name = "mdio-gpio", - .id = 0, - .dev = { - .platform_data = &re450_mdio, - }, -}; - -static void __init rex5x_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f610008); - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 tmpmac[ETH_ALEN]; - - ath79_register_m25p80(&tl_re450_flash_data); - ath79_register_gpio_keys_polled(-1, RE450_KEYS_POLL_INTERVAL, - ARRAY_SIZE(re450_gpio_keys), - re450_gpio_keys); - - ath79_init_mac(tmpmac, mac, -1); - ath79_register_wmac(art + RE450_WMAC_CALDATA_OFFSET, tmpmac); - - ath79_register_pci(); - - /* MDIO Interface */ - platform_device_register(&re450_phy_device); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - /* GMAC0 is connected to the RGMII interface to an Atheros AR8035-A */ - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.mii_bus_dev = &re450_phy_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(RE450_LAN_PHYADDR); - ath79_eth0_pll_data.pll_1000 = 0xa6000000; - ath79_eth0_pll_data.pll_100 = 0xa0000101; - ath79_eth0_pll_data.pll_10 = 0x80001313; - ath79_register_eth(0); -} - -static void __init re355_setup(void) -{ - rex5x_setup(); - ath79_register_leds_gpio(-1, ARRAY_SIZE(re355_leds_gpio), - re355_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_RE355, "RE355", "TP-LINK RE355", - re355_setup) - -static void __init re450_setup(void) -{ - rex5x_setup(); - ath79_register_leds_gpio(-1, ARRAY_SIZE(re450_leds_gpio), - re450_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_RE450, "RE450", "TP-LINK RE450", - re450_setup) diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c deleted file mode 100644 index 332b0780d0..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * eTactica EG-200 board, based on 8devices Carambola2 module - * - * Copyright (C) 2015 Karl Palsson <karlp@etactica.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define RME_EG200_GPIO_LED_WLAN 0 -#define RME_EG200_GPIO_LED_ETH0 13 -#define RME_EG200_GPIO_LED_ETACTICA 15 -#define RME_EG200_GPIO_LED_MODBUS 16 - -#define RME_EG200_GPIO_BTN_RESTORE 11 - -#define RME_EG200_KEYS_POLL_INTERVAL 20 /* msecs */ -#define RME_EG200_KEYS_DEBOUNCE_INTERVAL (3 * RME_EG200_KEYS_POLL_INTERVAL) - -#define RME_EG200_MAC0_OFFSET 0x0000 -#define RME_EG200_CALDATA_OFFSET 0x1000 -#define RME_EG200_WMAC_MAC_OFFSET 0x1002 - -static struct gpio_led rme_eg200_leds_gpio[] __initdata = { - { - .name = "eg200:red:wlan", - .gpio = RME_EG200_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "eg200:red:eth0", - .gpio = RME_EG200_GPIO_LED_ETH0, - .active_low = 1, - }, { - .name = "eg200:red:etactica", - .gpio = RME_EG200_GPIO_LED_ETACTICA, - .active_low = 0, - }, { - .name = "eg200:red:modbus", - .gpio = RME_EG200_GPIO_LED_MODBUS, - .active_low = 0, - } -}; - -static struct gpio_keys_button rme_eg200_keys[] __initdata = { - { - .desc = "restore button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = RME_EG200_KEYS_DEBOUNCE_INTERVAL, - .gpio = RME_EG200_GPIO_BTN_RESTORE, - .active_low = 1, - }, -}; - -static void __init rme_eg200_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - ath79_register_wmac(art + RME_EG200_CALDATA_OFFSET, - art + RME_EG200_WMAC_MAC_OFFSET); - - ath79_setup_ar933x_phy4_switch(true, true); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + RME_EG200_MAC0_OFFSET, 0); - - ath79_register_mdio(0, 0x0); - - /* WAN port */ - ath79_register_eth(0); - - ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rme_eg200_leds_gpio), - rme_eg200_leds_gpio); - ath79_register_gpio_keys_polled(-1, RME_EG200_KEYS_POLL_INTERVAL, - ARRAY_SIZE(rme_eg200_keys), - rme_eg200_keys); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_RME_EG200, "RME-EG200", "eTactica EG-200", - rme_eg200_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rut9xx.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rut9xx.c deleted file mode 100644 index 43a2a78c67..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rut9xx.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * Teltonika RUT900 series boards support - * - * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/i2c.h> -#include <linux/i2c-algo-bit.h> -#include <linux/i2c-gpio.h> -#include <linux/platform_data/pca953x.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define RUT9XX_GPIO_LED_LAN1 14 -#define RUT9XX_GPIO_LED_LAN2 13 -#define RUT9XX_GPIO_LED_LAN3 22 -#define RUT9XX_GPIO_LED_WAN 1 - -#define RUT9XX_PCA9539_GPIO_BASE 32 -#define RUT9XX_PCA9539_GPIO_SIGNAL1 (0 + RUT9XX_PCA9539_GPIO_BASE) -#define RUT9XX_PCA9539_GPIO_SIGNAL2 (1 + RUT9XX_PCA9539_GPIO_BASE) -#define RUT9XX_PCA9539_GPIO_SIGNAL3 (2 + RUT9XX_PCA9539_GPIO_BASE) -#define RUT9XX_PCA9539_GPIO_SIGNAL4 (3 + RUT9XX_PCA9539_GPIO_BASE) -#define RUT9XX_PCA9539_GPIO_SIGNAL5 (4 + RUT9XX_PCA9539_GPIO_BASE) -#define RUT9XX_PCA9539_GPIO_STATUS_R (5 + RUT9XX_PCA9539_GPIO_BASE) -#define RUT9XX_PCA9539_GPIO_STATUS_G (6 + RUT9XX_PCA9539_GPIO_BASE) - -#define RUT9XX_GPIO_BTN_RESET 15 - -#define RUT9XX_GPIO_I2C_SCK 16 -#define RUT9XX_GPIO_I2C_SDA 17 - -#define RUT9XX_GPIO_EXT_LNA0 2 - -#define RUT9XX_WMAC_CALDATA_OFFSET 0x1000 - -#define RUT9XX_KEYS_POLL_INTERVAL 20 -#define RUT9XX_KEYS_DEBOUNCE_INTERVAL (3 * RUT9XX_KEYS_POLL_INTERVAL) - -static struct gpio_led rut900_leds_gpio[] __initdata = { - { - .name = "rut900:green:lan1", - .gpio = RUT9XX_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "rut900:green:lan2", - .gpio = RUT9XX_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "rut900:green:lan3", - .gpio = RUT9XX_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "rut900:green:signal1", - .gpio = RUT9XX_PCA9539_GPIO_SIGNAL1, - .active_low = 0, - }, { - .name = "rut900:green:signal2", - .gpio = RUT9XX_PCA9539_GPIO_SIGNAL2, - .active_low = 0, - }, { - .name = "rut900:green:signal3", - .gpio = RUT9XX_PCA9539_GPIO_SIGNAL3, - .active_low = 0, - }, { - .name = "rut900:green:signal4", - .gpio = RUT9XX_PCA9539_GPIO_SIGNAL4, - .active_low = 0, - }, { - .name = "rut900:green:signal5", - .gpio = RUT9XX_PCA9539_GPIO_SIGNAL5, - .active_low = 0, - }, { - .name = "rut900:green:status", - .gpio = RUT9XX_PCA9539_GPIO_STATUS_G, - .active_low = 0, - }, { - .name = "rut900:green:wan", - .gpio = RUT9XX_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "rut900:red:status", - .gpio = RUT9XX_PCA9539_GPIO_STATUS_R, - .active_low = 0, - }, -}; - -static struct gpio_keys_button rut900_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = RUT9XX_KEYS_DEBOUNCE_INTERVAL, - .gpio = RUT9XX_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct i2c_gpio_platform_data rut900_i2c_gpio_data = { - .sda_pin = RUT9XX_GPIO_I2C_SDA, - .scl_pin = RUT9XX_GPIO_I2C_SCK, - .udelay = 10, -}; - -static struct platform_device rut900_i2c_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &rut900_i2c_gpio_data, - }, -}; - -static struct pca953x_platform_data rut9xx_pca9539_data = { - .gpio_base = RUT9XX_PCA9539_GPIO_BASE, - .irq_base = -1, -}; - -static struct i2c_board_info rut900_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("pca9539", 0x74), - .platform_data = &rut9xx_pca9539_data, - }, -}; - -static void __init rut900_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1f030000); - u8 *mac = (u8 *) KSEG1ADDR(0x1f020000); - u8 wlan_mac[ETH_ALEN]; - - ath79_register_m25p80(NULL); - - ath79_register_mdio(1, 0x0); - - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = 0xf1; - - /* LAN */ - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - ath79_register_eth(1); - - /* WAN */ - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.speed = SPEED_100; - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_register_eth(0); - - platform_device_register(&rut900_i2c_device); - i2c_register_board_info(0, rut900_i2c_devs, - ARRAY_SIZE(rut900_i2c_devs)); - - /* Disable JTAG (enables GPIO0-3) */ - ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rut900_leds_gpio), - rut900_leds_gpio); - - ath79_register_gpio_keys_polled(-1, RUT9XX_KEYS_POLL_INTERVAL, - ARRAY_SIZE(rut900_gpio_keys), - rut900_gpio_keys); - - ath79_wmac_set_ext_lna_gpio(0, RUT9XX_GPIO_EXT_LNA0); - - ath79_init_mac(wlan_mac, mac, 2); - ath79_register_wmac(art + RUT9XX_WMAC_CALDATA_OFFSET, wlan_mac); - - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_RUT9XX, "RUT900", "Teltonika RUT900", rut900_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rw2458n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rw2458n.c deleted file mode 100644 index bb7c2475bd..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rw2458n.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Redwave RW2458N support - * - * Copyright (C) 2011-2013 Cezary Jackiewicz <cezary@eko.one.pl> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -#define RW2458N_GPIO_LED_D3 1 -#define RW2458N_GPIO_LED_D4 0 -#define RW2458N_GPIO_LED_D5 11 -#define RW2458N_GPIO_LED_D6 7 -#define RW2458N_GPIO_BTN_RESET 12 - -#define RW2458N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define RW2458N_KEYS_DEBOUNCE_INTERVAL (3 * RW2458N_KEYS_POLL_INTERVAL) - -static struct gpio_keys_button rw2458n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = RW2458N_KEYS_DEBOUNCE_INTERVAL, - .gpio = RW2458N_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -#define RW2458N_WAN_PHYMASK BIT(4) - -static struct gpio_led rw2458n_leds_gpio[] __initdata = { - { - .name = "rw2458n:green:d3", - .gpio = RW2458N_GPIO_LED_D3, - .active_low = 1, - }, { - .name = "rw2458n:green:d4", - .gpio = RW2458N_GPIO_LED_D4, - .active_low = 1, - }, { - .name = "rw2458n:green:d5", - .gpio = RW2458N_GPIO_LED_D5, - .active_low = 1, - }, { - .name = "rw2458n:green:d6", - .gpio = RW2458N_GPIO_LED_D6, - .active_low = 1, - } -}; - -static void __init rw2458n_setup(void) -{ - u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); - - ath79_register_m25p80(NULL); - - ath79_register_mdio(0, ~RW2458N_WAN_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(rw2458n_leds_gpio), - rw2458n_leds_gpio); - - ath79_register_gpio_keys_polled(-1, RW2458N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(rw2458n_gpio_keys), - rw2458n_gpio_keys); - ath79_register_usb(); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_RW2458N, "RW2458N", "Redwave RW2458N", - rw2458n_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-sc1750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-sc1750.c deleted file mode 100644 index 3a7d654b85..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-sc1750.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Abicom International Scorpion SC1750 support. - * - * Copyright (c) 2012 Qualcomm Atheros - * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2017 Conor O'Gorman <i@conorogorman.net> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/platform_device.h> -#include <linux/platform_data/phy-at803x.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-nfc.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define SC1750_GPIO_LED_POWER 11 -#define SC1750_GPIO_LED_ERR1 12 -#define SC1750_GPIO_LED_WLAN 13 -#define SC1750_GPIO_LED_ERR2 14 -#define SC1750_GPIO_LED_OK3 15 -#define SC1750_GPIO_LED_ERR3 16 -#define SC1750_GPIO_BTN_RESET 4 - -#define SC1750_KEYS_POLL_INTERVAL 20 /* msecs */ -#define SC1750_KEYS_DEBOUNCE_INTERVAL (3 * SC1750_KEYS_POLL_INTERVAL) - -#define SC1750_MAC0_OFFSET 0 -#define SC1750_MAC1_OFFSET 6 -#define SC1750_WMAC_CALDATA_OFFSET 0x1000 -#define SC1750_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led sc1750_leds_gpio[] __initdata = { - { - .name = "sc1750:green:power", - .gpio = SC1750_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "sc1750:red:power", - .gpio = SC1750_GPIO_LED_ERR1, - .active_low = 1, - }, - { - .name = "sc1750:green:wlan", - .gpio = SC1750_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "sc1750:red:wlan", - .gpio = SC1750_GPIO_LED_ERR2, - .active_low = 1, - } -}; - -static struct gpio_keys_button sc1750_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = SC1750_KEYS_DEBOUNCE_INTERVAL, - .gpio = SC1750_GPIO_BTN_RESET, - .active_low = 0, - } -}; - -static struct at803x_platform_data at803x_data = { - .disable_smarteee = 1, - .enable_rgmii_rx_delay = 0, - .enable_rgmii_tx_delay = 0, -}; - -static struct mdio_board_info sc1750_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 1, - .platform_data = &at803x_data, - }, -}; - -static void __init sc1750_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(sc1750_leds_gpio), - sc1750_leds_gpio); - ath79_register_gpio_keys_polled(-1, SC1750_KEYS_POLL_INTERVAL, - ARRAY_SIZE(sc1750_gpio_keys), - sc1750_gpio_keys); - - ath79_register_usb(); - ath79_register_nfc(); - - ath79_register_wmac(art + SC1750_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_mdio(0, 0); - mdiobus_register_board_info(sc1750_mdio0_info, - ARRAY_SIZE(sc1750_mdio0_info)); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + SC1750_MAC0_OFFSET, 0); - - ath79_eth0_pll_data.pll_1000 = 0xa6000101; - ath79_eth0_pll_data.pll_100 = 0xa4000101; - /* GMAC0 is connected to the RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = 0xF; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - - ath79_register_eth(0); - - /* GMAC1 is connected to the SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(1); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_SC1750, "SC1750", "Abicom SC1750", sc1750_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c deleted file mode 100644 index 6dd81ecd5a..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * Abicom International Scorpion SC300M Module support. - * - * Copyright (c) 2012 Qualcomm Atheros - * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2017 Conor O'Gorman <i@conorogorman.net> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/platform_device.h> -#include <linux/platform_data/phy-at803x.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-nfc.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define SC300M_GPIO_LED_WLAN 0 -#define SC300M_GPIO_LED_POWER 1 - -#define SC300M_GPIO_BTN_RESET 17 - -#define SC300M_KEYS_POLL_INTERVAL 20 /* msecs */ -#define SC300M_KEYS_DEBOUNCE_INTERVAL (3 * SC300M_KEYS_POLL_INTERVAL) - -#define SC300M_MAC0_OFFSET 0 -#define SC300M_MAC1_OFFSET 6 -#define SC300M_WMAC_CALDATA_OFFSET 0x1000 -#define SC300M_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led sc300m_leds_gpio[] __initdata = { - { - .name = "sc300m:blue:wlan", - .gpio = SC300M_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "sc300m:blue:power", - .gpio = SC300M_GPIO_LED_POWER, - .active_low = 1, - } -}; - -static struct gpio_keys_button sc300m_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = SC300M_KEYS_DEBOUNCE_INTERVAL, - .gpio = SC300M_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct at803x_platform_data at803x_data = { - .disable_smarteee = 1, - .enable_rgmii_rx_delay = 0, - .enable_rgmii_tx_delay = 0, -}; - -static struct mdio_board_info sc300m_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 1, - .platform_data = &at803x_data, - }, -}; - -static void __init sc300m_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(sc300m_leds_gpio), - sc300m_leds_gpio); - ath79_register_gpio_keys_polled(-1, SC300M_KEYS_POLL_INTERVAL, - ARRAY_SIZE(sc300m_gpio_keys), - sc300m_gpio_keys); - - ath79_register_usb(); - ath79_register_nfc(); - - ath79_register_wmac(art + SC300M_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_mdio(0, 0); - mdiobus_register_board_info(sc300m_mdio0_info, - ARRAY_SIZE(sc300m_mdio0_info)); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + SC300M_MAC0_OFFSET, 0); - - ath79_eth0_pll_data.pll_1000 = 0xa6000101; - ath79_eth0_pll_data.pll_100 = 0xa4000101; - /* GMAC0 is connected to the RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = 0xF; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - - ath79_register_eth(0); - - /* GMAC1 is connected to the SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(1); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_SC300M, "SC300M", "Abicom SC300M", sc300m_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-sc450.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-sc450.c deleted file mode 100644 index dee183e790..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-sc450.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Abicom International Scorpion SC450 support. - * - * Copyright (c) 2012 Qualcomm Atheros - * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2017 Conor O'Gorman <i@conorogorman.net> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/platform_device.h> -#include <linux/platform_data/phy-at803x.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-nfc.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define SC450_GPIO_LED_POWER 13 -#define SC450_GPIO_LED_ERR1 14 -#define SC450_GPIO_LED_ERR2 15 -#define SC450_GPIO_LED_WLAN 16 -#define SC450_GPIO_BTN_RESET 17 -#define SC450_GPIO_WP 18 -#define SC450_GPIO_POE 19 -#define SC450_GPIO_RX_LOS 20 -#define SC450_GPIO_MOD_GND 21 -#define SC450_GPIO_MOD_SCL 22 -#define SC450_GPIO_MOD_SDA 23 - -#define SC450_KEYS_POLL_INTERVAL 20 /* msecs */ -#define SC450_KEYS_DEBOUNCE_INTERVAL (3 * SC450_KEYS_POLL_INTERVAL) - -#define SC450_MAC0_OFFSET 0 -#define SC450_MAC1_OFFSET 6 -#define SC450_WMAC_CALDATA_OFFSET 0x1000 -#define SC450_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led sc450_leds_gpio[] __initdata = { - { - .name = "sc450:green:power", - .gpio = SC450_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "sc450:red:power", - .gpio = SC450_GPIO_LED_ERR1, - .active_low = 1, - }, - { - .name = "sc450:green:wlan", - .gpio = SC450_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "sc450:red:wlan", - .gpio = SC450_GPIO_LED_ERR2, - .active_low = 1, - } -}; - -static struct gpio_keys_button sc450_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = SC450_KEYS_DEBOUNCE_INTERVAL, - .gpio = SC450_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct at803x_platform_data at803x_data = { - .disable_smarteee = 1, - .enable_rgmii_rx_delay = 0, - .enable_rgmii_tx_delay = 0, -}; - -static struct mdio_board_info sc450_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 1, - .platform_data = &at803x_data, - }, -}; - -static void __init sc450_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(sc450_leds_gpio), - sc450_leds_gpio); - ath79_register_gpio_keys_polled(-1, SC450_KEYS_POLL_INTERVAL, - ARRAY_SIZE(sc450_gpio_keys), - sc450_gpio_keys); - - ath79_register_usb(); - ath79_register_nfc(); - - ath79_register_wmac(art + SC450_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_mdio(0, 0); - mdiobus_register_board_info(sc450_mdio0_info, - ARRAY_SIZE(sc450_mdio0_info)); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + SC450_MAC0_OFFSET, 0); - - ath79_eth0_pll_data.pll_1000 = 0xa6000101; - ath79_eth0_pll_data.pll_100 = 0xa4000101; - /* GMAC0 is connected to the RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = 0xF; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - - ath79_register_eth(0); - - /* GMAC1 is connected to the SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(1); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_SC450, "SC450", "Abicom SC450", sc450_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-smart-300.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-smart-300.c deleted file mode 100644 index 2520e960d3..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-smart-300.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * NC-LINK SMART-300 board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ag71xx_platform.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define SMART_300_GPIO_LED_WLAN 13 -#define SMART_300_GPIO_LED_WAN 18 -#define SMART_300_GPIO_LED_LAN4 19 -#define SMART_300_GPIO_LED_LAN3 12 -#define SMART_300_GPIO_LED_LAN2 21 -#define SMART_300_GPIO_LED_LAN1 20 -#define SMART_300_GPIO_LED_SYSTEM 15 -#define SMART_300_GPIO_LED_POWER 14 - -#define SMART_300_GPIO_BTN_RESET 17 -#define SMART_300_GPIO_SW_RFKILL 16 - -#define SMART_300_KEYS_POLL_INTERVAL 20 /* msecs */ -#define SMART_300_KEYS_DEBOUNCE_INTERVAL (3 * SMART_300_KEYS_POLL_INTERVAL) - -#define SMART_300_GPIO_MASK 0x007fffff - -static const char *smart_300_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data smart_300_flash_data = { - .part_probes = smart_300_part_probes, -}; - -static struct gpio_led smart_300_leds_gpio[] __initdata = { - { - .name = "nc-link:green:lan1", - .gpio = SMART_300_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "nc-link:green:lan2", - .gpio = SMART_300_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "nc-link:green:lan3", - .gpio = SMART_300_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "nc-link:green:lan4", - .gpio = SMART_300_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "nc-link:green:system", - .gpio = SMART_300_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "nc-link:green:wan", - .gpio = SMART_300_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "nc-link:green:wlan", - .gpio = SMART_300_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button smart_300_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = SMART_300_KEYS_DEBOUNCE_INTERVAL, - .gpio = SMART_300_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init smart_300_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(smart_300_leds_gpio), - smart_300_leds_gpio); - - ath79_register_gpio_keys_polled(1, SMART_300_KEYS_POLL_INTERVAL, - ARRAY_SIZE(smart_300_gpio_keys), - smart_300_gpio_keys); - - ath79_register_m25p80(&smart_300_flash_data); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); - - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - - /* GMAC0 is connected to the PHY0 of the internal switch */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(4); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_register_eth(0); - - /* GMAC1 is connected to the internal switch */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_register_eth(1); - - ath79_register_wmac(ee, mac); - - gpio_request(SMART_300_GPIO_LED_POWER, "power"); - gpio_direction_output(SMART_300_GPIO_LED_POWER, GPIOF_OUT_INIT_LOW); -} - -MIPS_MACHINE(ATH79_MACH_SMART_300, "SMART-300", "NC-LINK SMART-300", - smart_300_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-som9331.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-som9331.c deleted file mode 100644 index eef5bcedc2..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-som9331.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * OpenEmbed SOM9331 board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * 5/27/2016 - Modified by Allan Nick Pedrana <nik9993@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define SOM9331_GPIO_LED_WLAN 27 -#define SOM9331_GPIO_LED_SYSTEM 0 -#define SOM9331_GPIO_LED_2 13 -#define SOM9331_GPIO_LED_3 14 -#define SOM9331_GPIO_LED_5 16 -#define SOM9331_GPIO_LED_WAN SOM9331_GPIO_LED_2 -#define SOM9331_GPIO_LED_LAN1 SOM9331_GPIO_LED_3 -#define SOM9331_GPIO_LED_LAN2 SOM9331_GPIO_LED_5 -#define SOM9331_GPIO_BTN_RESET 11 - -#define SOM9331_KEYS_POLL_INTERVAL 20 /* msecs */ -#define SOM9331_KEYS_DEBOUNCE_INTERVAL (3 * SOM9331_KEYS_POLL_INTERVAL) - -static const char *som9331_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data som9331_flash_data = { - .part_probes = som9331_part_probes, -}; - -static struct gpio_led som9331_leds_gpio[] __initdata = { - { - .name = "som9331:red:wlan", - .gpio = SOM9331_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "som9331:orange:wan", - .gpio = SOM9331_GPIO_LED_WAN, - .active_low = 0, - }, - { - .name = "som9331:orange:lan1", - .gpio = SOM9331_GPIO_LED_LAN1, - .active_low = 0, - }, - { - .name = "som9331:orange:lan2", - .gpio = SOM9331_GPIO_LED_LAN2, - .active_low = 0, - }, - { - .name = "som9331:blue:system", - .gpio = SOM9331_GPIO_LED_SYSTEM, - .active_low = 0, - }, -}; - -static struct gpio_keys_button som9331_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = SOM9331_KEYS_DEBOUNCE_INTERVAL, - .gpio = SOM9331_GPIO_BTN_RESET, - .active_low = 0, - } -}; - -static void __init som9331_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_setup_ar933x_phy4_switch(true, true); - - ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_register_m25p80(&som9331_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(som9331_leds_gpio), - som9331_leds_gpio); - ath79_register_gpio_keys_polled(-1, SOM9331_KEYS_POLL_INTERVAL, - ARRAY_SIZE(som9331_gpio_keys), - som9331_gpio_keys); - - ath79_register_usb(); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); - - ath79_register_mdio(0, 0x0); - - /* LAN ports */ - ath79_register_eth(1); - - /* WAN port */ - ath79_register_eth(0); - - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_SOM9331, "SOM9331", "OpenEmbed SOM9331", som9331_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-sr3200.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-sr3200.c deleted file mode 100644 index 72d46c0c47..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-sr3200.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Support for YunCore SR3200 and XD3200 boards - * - * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/ar8216_platform.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define SR3200_XD3200_GPIO_LED_SYSTEM 1 -#define SR3200_XD3200_GPIO_LED_WLAN2G 19 - -#define SR3200_XD3200_GPIO_BTN_RESET 2 - -#define SR3200_XD3200_KEYS_POLL_INTERVAL 20 -#define SR3200_XD3200_KEYS_DEBOUNCE_INTERVAL \ - (3 * SR3200_XD3200_KEYS_POLL_INTERVAL) - -static struct gpio_led xd3200_leds_gpio[] __initdata = { - { - .name = "xd3200:green:system", - .gpio = SR3200_XD3200_GPIO_LED_SYSTEM, - .active_low = 1, - }, - { - .name = "xd3200:blue:wlan2g", - .gpio = SR3200_XD3200_GPIO_LED_WLAN2G, - .active_low = 1, - }, -}; - -static struct gpio_led sr3200_leds_gpio[] __initdata = { - { - .name = "sr3200:green:system", - .gpio = SR3200_XD3200_GPIO_LED_SYSTEM, - .active_low = 1, - }, - { - .name = "sr3200:green:wlan2g", - .gpio = SR3200_XD3200_GPIO_LED_WLAN2G, - .active_low = 1, - }, -}; - -static struct gpio_keys_button sr3200_xd3200_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = SR3200_XD3200_KEYS_DEBOUNCE_INTERVAL, - .gpio = SR3200_XD3200_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static const struct ar8327_led_info sr3200_leds_qca833x[] = { - AR8327_LED_INFO(PHY0_0, HW, "sr3200:green:lan1"), - AR8327_LED_INFO(PHY1_0, HW, "sr3200:green:lan2"), - AR8327_LED_INFO(PHY2_0, HW, "sr3200:green:lan3"), - AR8327_LED_INFO(PHY3_0, HW, "sr3200:green:lan4"), - AR8327_LED_INFO(PHY4_0, HW, "sr3200:green:wan"), -}; - -static const struct ar8327_led_info xd3200_leds_qca833x[] = { - AR8327_LED_INFO(PHY1_0, HW, "xd3200:green:lan"), - AR8327_LED_INFO(PHY2_0, HW, "xd3200:green:wan"), -}; - -/* Blink rate: 1 Gbps -> 8 hz, 100 Mbs -> 4 Hz, 10 Mbps -> 2 Hz */ -static struct ar8327_led_cfg sr3200_xd3200_qca833x_led_cfg = { - .led_ctrl0 = 0xcf37cf37, - .led_ctrl1 = 0xcf37cf37, - .led_ctrl2 = 0xcf37cf37, - .led_ctrl3 = 0x0, - .open_drain = true, -}; - -static struct ar8327_pad_cfg sr3200_xd3200_qca833x_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -static struct ar8327_platform_data sr3200_xd3200_qca833x_data = { - .pad0_cfg = &sr3200_xd3200_qca833x_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &sr3200_xd3200_qca833x_led_cfg, -}; - -static struct mdio_board_info sr3200_xd3200_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &sr3200_xd3200_qca833x_data, - }, -}; - -static void __init sr3200_xd3200_common_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_mdio(0, 0x0); - mdiobus_register_board_info(sr3200_xd3200_mdio0_info, - ARRAY_SIZE(sr3200_xd3200_mdio0_info)); - - /* GMAC0 is connected to QCA8334/QCA8337N switch */ - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_register_eth(0); - - ath79_register_wmac(mac + 0x1000, NULL); - - ap91_pci_init(mac + 0x5000, NULL); - - ath79_gpio_direction_select(SR3200_XD3200_GPIO_LED_SYSTEM, true); - ath79_gpio_direction_select(SR3200_XD3200_GPIO_LED_WLAN2G, true); - - /* Mute LEDs on boot */ - gpio_set_value(SR3200_XD3200_GPIO_LED_SYSTEM, 1); - gpio_set_value(SR3200_XD3200_GPIO_LED_WLAN2G, 1); - - ath79_gpio_output_select(SR3200_XD3200_GPIO_LED_SYSTEM, 0); - ath79_gpio_output_select(SR3200_XD3200_GPIO_LED_WLAN2G, 0); - - ath79_register_gpio_keys_polled(-1, SR3200_XD3200_KEYS_POLL_INTERVAL, - ARRAY_SIZE(sr3200_xd3200_gpio_keys), - sr3200_xd3200_gpio_keys); -} - -static void __init sr3200_setup(void) -{ - sr3200_xd3200_qca833x_data.leds = sr3200_leds_qca833x; - sr3200_xd3200_qca833x_data.num_leds = ARRAY_SIZE(sr3200_leds_qca833x); - - sr3200_xd3200_common_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(sr3200_leds_gpio), - sr3200_leds_gpio); - - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_SR3200, "SR3200", "YunCore SR3200", sr3200_setup); - -static void __init xd3200_setup(void) -{ - sr3200_xd3200_qca833x_data.leds = xd3200_leds_qca833x; - sr3200_xd3200_qca833x_data.num_leds = ARRAY_SIZE(xd3200_leds_qca833x); - - sr3200_xd3200_common_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(xd3200_leds_gpio), - xd3200_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_XD3200, "XD3200", "YunCore XD3200", xd3200_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-t830.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-t830.c deleted file mode 100644 index ffdb2ca533..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-t830.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * YunCore T830 board support - * - * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define T830_GPIO_LED_LAN1 16 -#define T830_GPIO_LED_LAN2 15 -#define T830_GPIO_LED_LAN3 14 -#define T830_GPIO_LED_LAN4 11 -#define T830_GPIO_LED_USB 13 -#define T830_GPIO_LED_WAN 4 -#define T830_GPIO_LED_WLAN 12 - -#define T830_GPIO_BTN_RESET 17 - -#define T830_KEYS_POLL_INTERVAL 20 /* msec */ -#define T830_KEYS_DEBOUNCE_INTERVAL (3 * T830_KEYS_POLL_INTERVAL) - -#define T830_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led t830_gpio_leds[] __initdata = { - { - .name = "t830:green:lan1", - .gpio = T830_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "t830:green:lan2", - .gpio = T830_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "t830:green:lan3", - .gpio = T830_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "t830:green:lan4", - .gpio = T830_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "t830:green:usb", - .gpio = T830_GPIO_LED_USB, - .active_low = 1, - .default_state = LEDS_GPIO_DEFSTATE_KEEP, - }, { - .name = "t830:green:wan", - .gpio = T830_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "t830:green:wlan", - .gpio = T830_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button t830_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = T830_KEYS_DEBOUNCE_INTERVAL, - .gpio = T830_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static void __init t830_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff1000); - u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_mdio(0, 0x0); - - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask |= BIT(4); - - /* LAN */ - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_init_mac(ath79_eth1_data.mac_addr, mac + 6, 0); - ath79_register_eth(1); - - /* WAN */ - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.speed = SPEED_100; - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_register_eth(0); - - ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE, - AR934X_GPIO_FUNC_CLK_OBS4_EN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(t830_gpio_leds), - t830_gpio_leds); - - ath79_register_gpio_keys_polled(-1, T830_KEYS_POLL_INTERVAL, - ARRAY_SIZE(t830_gpio_keys), - t830_gpio_keys); - - ath79_register_usb(); - ath79_register_wmac(art, NULL); -} - -MIPS_MACHINE(ATH79_MACH_T830, "T830", "YunCore T830", t830_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tellstick-znet-lite.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tellstick-znet-lite.c deleted file mode 100644 index 0950d9a99d..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tellstick-znet-lite.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * Telldus TellStick ZNet Lite board support - * - * Copyright (C) 2016 Micke Prag <micke.prag@telldus.se> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TELLSTICK_GPIO_LED_SYSTEM 27 -#define TELLSTICK_GPIO_LED_BLUE 0 -#define TELLSTICK_GPIO_LED_RED 14 -#define TELLSTICK_GPIO_LED_GREEN 15 -#define TELLSTICK_GPIO_LED_LAN_GREEN 16 -#define TELLSTICK_GPIO_LED_LAN_ORANGE 17 - -#define TELLSTICK_GPIO_BTN_RESET 11 - -#define TELLSTICK_GPIO_RF433_RESET 13 - -#define TELLSTICK_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TELLSTICK_KEYS_DEBOUNCE_INTERVAL (3 * TELLSTICK_KEYS_POLL_INTERVAL) - -static const char *tellstick_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tellstick_flash_data = { - .part_probes = tellstick_part_probes, -}; - -static struct gpio_led tellstick_leds_gpio[] __initdata = { - { - .name = "tellstick:white:system", - .gpio = TELLSTICK_GPIO_LED_SYSTEM, - .active_low = 0, - }, - { - .name = "tellstick:blue:status", - .gpio = TELLSTICK_GPIO_LED_BLUE, - .active_low = 0, - }, - { - .name = "tellstick:red:status", - .gpio = TELLSTICK_GPIO_LED_RED, - .active_low = 0, - }, - { - .name = "tellstick:green:status", - .gpio = TELLSTICK_GPIO_LED_GREEN, - .active_low = 0, - }, - { - .name = "tellstick:green:lan", - .gpio = TELLSTICK_GPIO_LED_LAN_GREEN, - .active_low = 0, - }, - { - .name = "tellstick:orange:lan", - .gpio = TELLSTICK_GPIO_LED_LAN_ORANGE, - .active_low = 0, - }, -}; - -static struct gpio_keys_button tellstick_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TELLSTICK_KEYS_DEBOUNCE_INTERVAL, - .gpio = TELLSTICK_GPIO_BTN_RESET, - .active_low = 0, - } -}; - -static void __init tellstick_znet_lite_setup(void) -{ - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - u8 mac[ETH_ALEN]; - memcpy(&mac, (u8 *) KSEG1ADDR(0x1f01fc00), sizeof(mac)); - - ath79_gpio_function_disable( - AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN - ); - - ath79_register_m25p80(&tellstick_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(tellstick_leds_gpio), - tellstick_leds_gpio); - ath79_register_gpio_keys_polled(-1, TELLSTICK_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tellstick_gpio_keys), - tellstick_gpio_keys); - - gpio_request_one(TELLSTICK_GPIO_RF433_RESET, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "rf433 reset"); - ath79_register_usb(); - - ath79_init_mac(ath79_eth0_data.mac_addr, (u8 *)mac, 0); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - - // wlan0 mac needs to be different then eth0 - mac[3] += 1; - ath79_register_wmac(ee, (u8 *)mac); -} - -MIPS_MACHINE(ATH79_MACH_TELLSTICK_ZNET_LITE, "TELLSTICK-ZNET-LITE", "Telldus TellStick ZNet Lite", - tellstick_znet_lite_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-632brp.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-632brp.c deleted file mode 100644 index 855664e562..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-632brp.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * TrendNET TEW-632BRP board support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "nvram.h" - -#define TEW_632BRP_GPIO_LED_STATUS 1 -#define TEW_632BRP_GPIO_LED_WPS 3 -#define TEW_632BRP_GPIO_LED_WLAN 6 -#define TEW_632BRP_GPIO_BTN_WPS 12 -#define TEW_632BRP_GPIO_BTN_RESET 21 - -#define TEW_632BRP_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TEW_632BRP_KEYS_DEBOUNCE_INTERVAL (3 * TEW_632BRP_KEYS_POLL_INTERVAL) - -#define TEW_632BRP_CONFIG_ADDR 0x1f020000 -#define TEW_632BRP_CONFIG_SIZE 0x10000 - -static struct gpio_led tew_632brp_leds_gpio[] __initdata = { - { - .name = "tew-632brp:green:status", - .gpio = TEW_632BRP_GPIO_LED_STATUS, - .active_low = 1, - }, { - .name = "tew-632brp:blue:wps", - .gpio = TEW_632BRP_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "tew-632brp:green:wlan", - .gpio = TEW_632BRP_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button tew_632brp_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW_632BRP_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW_632BRP_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -#define TEW_632BRP_LAN_PHYMASK BIT(0) -#define TEW_632BRP_WAN_PHYMASK BIT(4) -#define TEW_632BRP_MDIO_MASK (~(TEW_632BRP_LAN_PHYMASK | \ - TEW_632BRP_WAN_PHYMASK)) - -static void __init tew_632brp_setup(void) -{ - const char *config = (char *) KSEG1ADDR(TEW_632BRP_CONFIG_ADDR); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - u8 mac[6]; - u8 *wlan_mac = NULL; - - if (ath79_nvram_parse_mac_addr(config, TEW_632BRP_CONFIG_SIZE, - "lan_mac=", mac) == 0) { - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - wlan_mac = mac; - } - - ath79_register_mdio(0, TEW_632BRP_MDIO_MASK); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.phy_mask = TEW_632BRP_LAN_PHYMASK; - - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = TEW_632BRP_WAN_PHYMASK; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio), - tew_632brp_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TEW_632BRP_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tew_632brp_gpio_keys), - tew_632brp_gpio_keys); - - ath79_register_wmac(eeprom, wlan_mac); -} - -MIPS_MACHINE(ATH79_MACH_TEW_632BRP, "TEW-632BRP", "TRENDnet TEW-632BRP", - tew_632brp_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-673gru.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-673gru.c deleted file mode 100644 index 80a5443c70..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-673gru.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * TRENDnet TEW-673GRU board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/rtl8366.h> -#include <linux/spi/spi.h> -#include <linux/spi/spi_gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define TEW673GRU_GPIO_LCD_SCK 0 -#define TEW673GRU_GPIO_LCD_MOSI 1 -#define TEW673GRU_GPIO_LCD_MISO 2 -#define TEW673GRU_GPIO_LCD_CS 6 - -#define TEW673GRU_GPIO_LED_WPS 9 - -#define TEW673GRU_GPIO_BTN_RESET 3 -#define TEW673GRU_GPIO_BTN_WPS 8 - -#define TEW673GRU_GPIO_RTL8366_SDA 5 -#define TEW673GRU_GPIO_RTL8366_SCK 7 - -#define TEW673GRU_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TEW673GRU_KEYS_DEBOUNCE_INTERVAL (3 * TEW673GRU_KEYS_POLL_INTERVAL) - -#define TEW673GRU_CAL0_OFFSET 0x1000 -#define TEW673GRU_CAL1_OFFSET 0x5000 -#define TEW673GRU_MAC0_OFFSET 0xffa0 -#define TEW673GRU_MAC1_OFFSET 0xffb4 - -#define TEW673GRU_CAL_LOCATION_0 0x1f660000 -#define TEW673GRU_CAL_LOCATION_1 0x1f7f0000 - -static struct gpio_led tew673gru_leds_gpio[] __initdata = { - { - .name = "trendnet:blue:wps", - .gpio = TEW673GRU_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button tew673gru_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW673GRU_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW673GRU_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static struct rtl8366_initval tew673gru_rtl8366s_initvals[] = { - { .reg = 0x06, .val = 0x0108 }, -}; - -static struct rtl8366_platform_data tew673gru_rtl8366s_data = { - .gpio_sda = TEW673GRU_GPIO_RTL8366_SDA, - .gpio_sck = TEW673GRU_GPIO_RTL8366_SCK, - .num_initvals = ARRAY_SIZE(tew673gru_rtl8366s_initvals), - .initvals = tew673gru_rtl8366s_initvals, -}; - -static struct platform_device tew673gru_rtl8366s_device = { - .name = RTL8366S_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &tew673gru_rtl8366s_data, - } -}; - -static struct spi_board_info tew673gru_spi_info[] = { - { - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 400000, - .modalias = "spidev", - .mode = SPI_MODE_2, - .controller_data = (void *) TEW673GRU_GPIO_LCD_CS, - }, -}; - -static struct spi_gpio_platform_data tew673gru_spi_data = { - .sck = TEW673GRU_GPIO_LCD_SCK, - .miso = TEW673GRU_GPIO_LCD_MISO, - .mosi = TEW673GRU_GPIO_LCD_MOSI, - .num_chipselect = 1, -}; - -static struct platform_device tew673gru_spi_device = { - .name = "spi_gpio", - .id = 1, - .dev = { - .platform_data = &tew673gru_spi_data, - }, -}; - -static bool __init tew673gru_is_caldata_valid(u8 *p) -{ - u16 *magic0, *magic1; - - magic0 = (u16 *)(p + TEW673GRU_CAL0_OFFSET); - magic1 = (u16 *)(p + TEW673GRU_CAL1_OFFSET); - - return (*magic0 == 0xa55a && *magic1 == 0xa55a); -} - -static void __init tew673gru_wlan_init(void) -{ - u8 mac1[ETH_ALEN], mac2[ETH_ALEN]; - u8 *caldata; - - caldata = (u8 *) KSEG1ADDR(TEW673GRU_CAL_LOCATION_0); - if (!tew673gru_is_caldata_valid(caldata)) { - caldata = (u8 *)KSEG1ADDR(TEW673GRU_CAL_LOCATION_1); - if (!tew673gru_is_caldata_valid(caldata)) { - pr_err("no calibration data found\n"); - return; - } - } - - ath79_parse_ascii_mac(caldata + TEW673GRU_MAC0_OFFSET, mac1); - ath79_parse_ascii_mac(caldata + TEW673GRU_MAC1_OFFSET, mac2); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2); - ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3); - - ap9x_pci_setup_wmac_led_pin(0, 5); - ap9x_pci_setup_wmac_led_pin(1, 5); - - ap94_pci_init(caldata + TEW673GRU_CAL0_OFFSET, mac1, - caldata + TEW673GRU_CAL1_OFFSET, mac2); -} - -static void __init tew673gru_setup(void) -{ - tew673gru_wlan_init(); - - ath79_register_mdio(0, 0x0); - - ath79_eth0_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_pll_data.pll_1000 = 0x11110000; - - ath79_eth1_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = 0x10; - ath79_eth1_pll_data.pll_1000 = 0x11110000; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tew673gru_leds_gpio), - tew673gru_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TEW673GRU_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tew673gru_gpio_keys), - tew673gru_gpio_keys); - - ath79_register_usb(); - - platform_device_register(&tew673gru_rtl8366s_device); - - spi_register_board_info(tew673gru_spi_info, - ARRAY_SIZE(tew673gru_spi_info)); - platform_device_register(&tew673gru_spi_device); -} - -MIPS_MACHINE(ATH79_MACH_TEW_673GRU, "TEW-673GRU", "TRENDnet TEW-673GRU", - tew673gru_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-712br.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-712br.c deleted file mode 100644 index 304b994887..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-712br.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * TRENDnet TEW-712BR board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TEW_712BR_GPIO_BTN_WPS 11 -#define TEW_712BR_GPIO_BTN_RESET 12 - -#define TEW_712BR_GPIO_LED_LAN1 13 -#define TEW_712BR_GPIO_LED_LAN2 14 -#define TEW_712BR_GPIO_LED_LAN3 15 -#define TEW_712BR_GPIO_LED_LAN4 16 -#define TEW_712BR_GPIO_LED_POWER_GREEN 20 -#define TEW_712BR_GPIO_LED_POWER_ORANGE 27 -#define TEW_712BR_GPIO_LED_WAN_GREEN 17 -#define TEW_712BR_GPIO_LED_WAN_ORANGE 23 -#define TEW_712BR_GPIO_LED_WLAN 0 -#define TEW_712BR_GPIO_LED_WPS 26 - -#define TEW_712BR_GPIO_WAN_LED_ENABLE 1 - -#define TEW_712BR_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TEW_712BR_KEYS_DEBOUNCE_INTERVAL (3 * TEW_712BR_KEYS_POLL_INTERVAL) - -#define TEW_712BR_ART_ADDRESS 0x1f010000 -#define TEW_712BR_CALDATA_OFFSET 0x1000 - -#define TEW_712BR_MAC_PART_ADDRESS 0x1f020000 -#define TEW_712BR_LAN_MAC_OFFSET 0x04 -#define TEW_712BR_WAN_MAC_OFFSET 0x16 - -static struct gpio_led tew_712br_leds_gpio[] __initdata = { - { - .name = "trendnet:green:lan1", - .gpio = TEW_712BR_GPIO_LED_LAN1, - .active_low = 0, - }, { - .name = "trendnet:green:lan2", - .gpio = TEW_712BR_GPIO_LED_LAN2, - .active_low = 0, - }, { - .name = "trendnet:green:lan3", - .gpio = TEW_712BR_GPIO_LED_LAN3, - .active_low = 0, - }, { - .name = "trendnet:green:lan4", - .gpio = TEW_712BR_GPIO_LED_LAN4, - .active_low = 0, - }, { - .name = "trendnet:blue:wps", - .gpio = TEW_712BR_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "trendnet:green:power", - .gpio = TEW_712BR_GPIO_LED_POWER_GREEN, - .active_low = 0, - }, { - .name = "trendnet:orange:power", - .gpio = TEW_712BR_GPIO_LED_POWER_ORANGE, - .active_low = 0, - }, { - .name = "trendnet:green:wan", - .gpio = TEW_712BR_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, { - .name = "trendnet:orange:wan", - .gpio = TEW_712BR_GPIO_LED_WAN_ORANGE, - .active_low = 0, - }, { - .name = "trendnet:green:wlan", - .gpio = TEW_712BR_GPIO_LED_WLAN, - .active_low = 0, - }, -}; - -static struct gpio_keys_button tew_712br_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TEW_712BR_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW_712BR_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TEW_712BR_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW_712BR_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static void __init tew_712br_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(TEW_712BR_ART_ADDRESS); - u8 *mac = (u8 *) KSEG1ADDR(TEW_712BR_MAC_PART_ADDRESS); - u8 lan_mac[ETH_ALEN]; - u8 wan_mac[ETH_ALEN]; - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - gpio_request_one(TEW_712BR_GPIO_WAN_LED_ENABLE, - GPIOF_OUT_INIT_LOW, "WAN LED enable"); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_712br_leds_gpio), - tew_712br_leds_gpio); - - ath79_register_gpio_keys_polled(1, TEW_712BR_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tew_712br_gpio_keys), - tew_712br_gpio_keys); - - ath79_register_m25p80(NULL); - - ath79_parse_ascii_mac(mac + TEW_712BR_LAN_MAC_OFFSET, lan_mac); - ath79_parse_ascii_mac(mac + TEW_712BR_WAN_MAC_OFFSET, wan_mac); - - ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(1); - ath79_register_eth(0); - - ath79_register_wmac(art + TEW_712BR_CALDATA_OFFSET, wan_mac); -} - -MIPS_MACHINE(ATH79_MACH_TEW_712BR, "TEW-712BR", - "TRENDnet TEW-712BR", tew_712br_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-732br.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-732br.c deleted file mode 100644 index 1f26f6f4b0..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-732br.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * TRENDnet TEW-732BR board support - * - * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TEW_732BR_GPIO_BTN_WPS 16 -#define TEW_732BR_GPIO_BTN_RESET 17 - -#define TEW_732BR_GPIO_LED_POWER_GREEN 4 -#define TEW_732BR_GPIO_LED_POWER_AMBER 14 -#define TEW_732BR_GPIO_LED_PLANET_GREEN 12 -#define TEW_732BR_GPIO_LED_PLANET_AMBER 22 - -#define TEW_732BR_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TEW_732BR_KEYS_DEBOUNCE_INTERVAL (3 * TEW_732BR_KEYS_POLL_INTERVAL) - -#define TEW_732BR_ART_ADDRESS 0x1fff0000 -#define TEW_732BR_CALDATA_OFFSET 0x1000 -#define TEW_732BR_LAN_MAC_OFFSET 0xffa0 -#define TEW_732BR_WAN_MAC_OFFSET 0xffb4 - -static struct gpio_led tew_732br_leds_gpio[] __initdata = { - { - .name = "trendnet:green:power", - .gpio = TEW_732BR_GPIO_LED_POWER_GREEN, - .active_low = 0, - }, - { - .name = "trendnet:amber:power", - .gpio = TEW_732BR_GPIO_LED_POWER_AMBER, - .active_low = 0, - }, - { - .name = "trendnet:green:wan", - .gpio = TEW_732BR_GPIO_LED_PLANET_GREEN, - .active_low = 1, - }, - { - .name = "trendnet:amber:wan", - .gpio = TEW_732BR_GPIO_LED_PLANET_AMBER, - .active_low = 0, - }, -}; - -static struct gpio_keys_button tew_732br_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TEW_732BR_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW_732BR_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TEW_732BR_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW_732BR_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - -static void __init tew_732br_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(TEW_732BR_ART_ADDRESS); - u8 lan_mac[ETH_ALEN]; - u8 wan_mac[ETH_ALEN]; - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_732br_leds_gpio), - tew_732br_leds_gpio); - - ath79_register_gpio_keys_polled(1, TEW_732BR_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tew_732br_gpio_keys), - tew_732br_gpio_keys); - - ath79_register_m25p80(NULL); - - ath79_parse_ascii_mac(art + TEW_732BR_LAN_MAC_OFFSET, lan_mac); - ath79_parse_ascii_mac(art + TEW_732BR_WAN_MAC_OFFSET, wan_mac); - - ath79_register_wmac(art + TEW_732BR_CALDATA_OFFSET, lan_mac); - - ath79_register_mdio(1, 0x0); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); - - /* LAN: GMAC1 is connected to the internal switch */ - ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - - ath79_register_eth(1); - - /* WAN: GMAC0 is connected to the PHY4 of the internal switch */ - ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0); - - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(4); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_TEW_732BR, "TEW-732BR", "TRENDnet TEW-732BR", - tew_732br_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-823dru.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-823dru.c deleted file mode 100644 index e631828a65..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-823dru.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * TRENDnet TEW-823DRU board support - * - * Copyright (C) 2015 Cezary Jackiewicz <cezary.jackiewicz@gmail.com> - * Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TEW_823DRU_GPIO_LED_POWER_ORANGE 14 -#define TEW_823DRU_GPIO_LED_POWER_GREEN 19 -#define TEW_823DRU_GPIO_LED_PLANET_GREEN 22 -#define TEW_823DRU_GPIO_LED_PLANET_ORANGE 23 - -#define TEW_823DRU_GPIO_BTN_WPS 16 -#define TEW_823DRU_GPIO_BTN_RESET 17 - -#define TEW_823DRU_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TEW_823DRU_KEYS_DEBOUNCE_INTERVAL \ - (3 * TEW_823DRU_KEYS_POLL_INTERVAL) - -#define TEW_823DRU_WMAC_CALDATA_OFFSET 0x1000 - -#define TEW_823DRU_LAN_MAC_OFFSET 0x04 -#define TEW_823DRU_WAN_MAC_OFFSET 0x18 - -static struct gpio_led tew_823dru_leds_gpio[] __initdata = { - { - .name = "trendnet:green:power", - .gpio = TEW_823DRU_GPIO_LED_POWER_GREEN, - .active_low = 1, - }, - { - .name = "trendnet:orange:power", - .gpio = TEW_823DRU_GPIO_LED_POWER_ORANGE, - .active_low = 1, - }, - { - .name = "trendnet:green:planet", - .gpio = TEW_823DRU_GPIO_LED_PLANET_GREEN, - .active_low = 1, - }, - { - .name = "trendnet:orange:planet", - .gpio = TEW_823DRU_GPIO_LED_PLANET_ORANGE, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tew_823dru_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TEW_823DRU_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW_823DRU_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TEW_823DRU_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW_823DRU_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - -/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */ -static struct ar8327_pad_cfg tew_823dru_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */ -static struct ar8327_pad_cfg tew_823dru_ar8327_pad6_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_platform_data tew_823dru_ar8327_data = { - .pad0_cfg = &tew_823dru_ar8327_pad0_cfg, - .pad6_cfg = &tew_823dru_ar8327_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .port6_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info tew_823dru_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &tew_823dru_ar8327_data, - }, -}; - -static void __init tew_823dru_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000); - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 lan_mac[ETH_ALEN]; - u8 wan_mac[ETH_ALEN]; - - ath79_parse_ascii_mac(mac + TEW_823DRU_LAN_MAC_OFFSET, lan_mac); - ath79_parse_ascii_mac(mac + TEW_823DRU_WAN_MAC_OFFSET, wan_mac); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_823dru_leds_gpio), - tew_823dru_leds_gpio); - ath79_register_gpio_keys_polled(-1, TEW_823DRU_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tew_823dru_gpio_keys), - tew_823dru_gpio_keys); - - ath79_register_wmac(art + TEW_823DRU_WMAC_CALDATA_OFFSET, lan_mac); - - ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0); - ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0); - - - mdiobus_register_board_info(tew_823dru_mdio0_info, - ARRAY_SIZE(tew_823dru_mdio0_info)); - ath79_register_mdio(0, 0x0); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - /* GMAC0 is connected to the RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x56000000; - - ath79_register_eth(0); - - /* GMAC1 is connected to the SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_pll_data.pll_1000 = 0x03000101; - - ath79_register_eth(1); - - ath79_register_usb(); - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_TEW_823DRU, "TEW-823DRU", "TRENDnet TEW-823DRU", - tew_823dru_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr11u.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr11u.c deleted file mode 100644 index 74ccf639e0..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr11u.c +++ /dev/null @@ -1,183 +0,0 @@ -/* - * TP-LINK TL-MR11U/TL-MR3040 board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_MR11U_GPIO_LED_3G 27 -#define TL_MR11U_GPIO_LED_WLAN 26 -#define TL_MR11U_GPIO_LED_LAN 17 - -#define TL_MR11U_GPIO_BTN_WPS 20 -#define TL_MR11U_GPIO_BTN_RESET 11 - -#define TL_MR11U_GPIO_USB_POWER 8 -#define TL_MR3040_GPIO_USB_POWER 18 - -#define TL_MR3040_V2_GPIO_BTN_SW1 19 -#define TL_MR3040_V2_GPIO_BTN_SW2 20 - -#define TL_MR11U_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_MR11U_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR11U_KEYS_POLL_INTERVAL) - -static const char *tl_mr11u_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_mr11u_flash_data = { - .part_probes = tl_mr11u_part_probes, -}; - -static struct gpio_led tl_mr11u_leds_gpio[] __initdata = { - { - .name = "tp-link:green:3g", - .gpio = TL_MR11U_GPIO_LED_3G, - .active_low = 1, - }, - { - .name = "tp-link:green:wlan", - .gpio = TL_MR11U_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "tp-link:green:lan", - .gpio = TL_MR11U_GPIO_LED_LAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_mr11u_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR11U_GPIO_BTN_RESET, - .active_low = 0, - }, - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR11U_GPIO_BTN_WPS, - .active_low = 0, - }, -}; - -static struct gpio_keys_button tl_mr3040_v2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR11U_GPIO_BTN_RESET, - .active_low = 0, - }, - { - .desc = "sw1", - .type = EV_SW, - .code = BTN_0, - .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR3040_V2_GPIO_BTN_SW1, - .active_low = 0, - }, - { - .desc = "sw2", - .type = EV_SW, - .code = BTN_1, - .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR3040_V2_GPIO_BTN_SW2, - .active_low = 0, - } -}; - -static void __init common_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - /* Disable hardware control LAN1 and LAN2 LEDs, enabling GPIO14 and GPIO15 */ - ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN); - - /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_m25p80(&tl_mr11u_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr11u_leds_gpio), - tl_mr11u_leds_gpio); - - ath79_register_usb(); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - - ath79_register_wmac(ee, mac); -} - -static void __init tl_mr11u_setup(void) -{ - common_setup(); - - ath79_register_gpio_keys_polled(-1, TL_MR11U_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_mr11u_gpio_keys), - tl_mr11u_gpio_keys); - gpio_request_one(TL_MR11U_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); -} - -MIPS_MACHINE(ATH79_MACH_TL_MR11U, "TL-MR11U", "TP-LINK TL-MR11U", - tl_mr11u_setup); - -static void __init tl_mr3040_setup(void) -{ - common_setup(); - - ath79_register_gpio_keys_polled(-1, TL_MR11U_KEYS_POLL_INTERVAL, - 1, tl_mr11u_gpio_keys); - gpio_request_one(TL_MR3040_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); -} - -MIPS_MACHINE(ATH79_MACH_TL_MR3040, "TL-MR3040", "TP-LINK TL-MR3040", - tl_mr3040_setup); - -static void __init tl_mr3040_v2_setup(void) -{ - common_setup(); - - ath79_register_gpio_keys_polled(-1, TL_MR11U_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_mr3040_v2_gpio_keys), - tl_mr3040_v2_gpio_keys); - gpio_request_one(TL_MR3040_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); -} - -MIPS_MACHINE(ATH79_MACH_TL_MR3040_V2, "TL-MR3040-v2", "TP-LINK TL-MR3040 v2", - tl_mr3040_v2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr13u.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr13u.c deleted file mode 100644 index 84b6937849..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr13u.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * TP-LINK TL-MR13U board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_MR13U_GPIO_LED_SYSTEM 27 - -#define TL_MR13U_GPIO_BTN_RESET 11 -#define TL_MR13U_GPIO_BTN_SW1 6 -#define TL_MR13U_GPIO_BTN_SW2 7 - -#define TL_MR13U_GPIO_USB_POWER 18 - -#define TL_MR13U_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_MR13U_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR13U_KEYS_POLL_INTERVAL) - -static const char *tl_mr13u_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_mr13u_flash_data = { - .part_probes = tl_mr13u_part_probes, -}; - -static struct gpio_led tl_mr13u_leds_gpio[] __initdata = { - { - .name = "tp-link:blue:system", - .gpio = TL_MR13U_GPIO_LED_SYSTEM, - .active_low = 0, - }, -}; - -static struct gpio_keys_button tl_mr13u_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_MR13U_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR13U_GPIO_BTN_RESET, - .active_low = 0, - }, - { - .desc = "sw1", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = TL_MR13U_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR13U_GPIO_BTN_SW1, - .active_low = 0, - }, - { - .desc = "sw2", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = TL_MR13U_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR13U_GPIO_BTN_SW2, - .active_low = 0, - }, -}; - -static void __init tl_mr13u_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_m25p80(&tl_mr13u_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr13u_leds_gpio), - tl_mr13u_leds_gpio); - ath79_register_gpio_keys_polled(-1, TL_MR13U_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_mr13u_gpio_keys), - tl_mr13u_gpio_keys); - - gpio_request_one(TL_MR13U_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_TL_MR13U, "TL-MR13U", "TP-LINK TL-MR13U v1", - tl_mr13u_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3020.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3020.c deleted file mode 100644 index e3b4087eff..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3020.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * TP-LINK TL-MR3020 board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_MR3020_GPIO_LED_3G 27 -#define TL_MR3020_GPIO_LED_WLAN 0 -#define TL_MR3020_GPIO_LED_LAN 17 -#define TL_MR3020_GPIO_LED_WPS 26 - -#define TL_MR3020_GPIO_BTN_WPS 11 -#define TL_MR3020_GPIO_BTN_SW1 18 -#define TL_MR3020_GPIO_BTN_SW2 20 - -#define TL_MR3020_GPIO_USB_POWER 8 - -#define TL_MR3020_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_MR3020_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3020_KEYS_POLL_INTERVAL) - -static const char *tl_mr3020_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_mr3020_flash_data = { - .part_probes = tl_mr3020_part_probes, -}; - -static struct gpio_led tl_mr3020_leds_gpio[] __initdata = { - { - .name = "tp-link:green:3g", - .gpio = TL_MR3020_GPIO_LED_3G, - .active_low = 1, - }, - { - .name = "tp-link:green:wlan", - .gpio = TL_MR3020_GPIO_LED_WLAN, - .active_low = 0, - }, - { - .name = "tp-link:green:lan", - .gpio = TL_MR3020_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "tp-link:green:wps", - .gpio = TL_MR3020_GPIO_LED_WPS, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_mr3020_gpio_keys[] __initdata = { - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR3020_GPIO_BTN_WPS, - .active_low = 0, - }, - { - .desc = "sw1", - .type = EV_SW, - .code = BTN_0, - .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR3020_GPIO_BTN_SW1, - .active_low = 0, - }, - { - .desc = "sw2", - .type = EV_SW, - .code = BTN_1, - .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR3020_GPIO_BTN_SW2, - .active_low = 0, - } -}; - -static void __init tl_mr3020_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_m25p80(&tl_mr3020_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3020_leds_gpio), - tl_mr3020_leds_gpio); - ath79_register_gpio_keys_polled(-1, TL_MR3020_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_mr3020_gpio_keys), - tl_mr3020_gpio_keys); - - gpio_request_one(TL_MR3020_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_TL_MR3020, "TL-MR3020", "TP-LINK TL-MR3020", - tl_mr3020_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3x20.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3x20.c deleted file mode 100644 index 5924ac5048..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3x20.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * TP-LINK TL-MR3220/3420 board support - * - * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define TL_MR3X20_GPIO_LED_QSS 0 -#define TL_MR3X20_GPIO_LED_SYSTEM 1 -#define TL_MR3X20_GPIO_LED_3G 8 - -#define TL_MR3X20_GPIO_BTN_RESET 11 -#define TL_MR3X20_GPIO_BTN_QSS 12 - -#define TL_MR3X20_GPIO_USB_POWER 6 - -#define TL_MR3X20_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_MR3X20_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3X20_KEYS_POLL_INTERVAL) - -static const char *tl_mr3x20_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_mr3x20_flash_data = { - .part_probes = tl_mr3x20_part_probes, -}; - -static struct gpio_led tl_mr3x20_leds_gpio[] __initdata = { - { - .name = "tp-link:green:system", - .gpio = TL_MR3X20_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_MR3X20_GPIO_LED_QSS, - .active_low = 1, - }, { - .name = "tp-link:green:3g", - .gpio = TL_MR3X20_GPIO_LED_3G, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_mr3x20_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR3X20_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR3X20_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static void __init tl_ap99_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(&tl_mr3x20_flash_data); - - ath79_register_gpio_keys_polled(-1, TL_MR3X20_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_mr3x20_gpio_keys), - tl_mr3x20_gpio_keys); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); - - ath79_register_mdio(0, 0x0); - - /* LAN ports */ - ath79_register_eth(1); - /* WAN port */ - ath79_register_eth(0); - - ap91_pci_init(ee, mac); -} - -static void __init tl_mr3x20_usb_setup(void) -{ - /* enable power for the USB port */ - gpio_request_one(TL_MR3X20_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); -} - -static void __init tl_mr3220_setup(void) -{ - tl_ap99_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio), - tl_mr3x20_leds_gpio); - ap9x_pci_setup_wmac_led_pin(0, 1); - tl_mr3x20_usb_setup(); -} - -MIPS_MACHINE(ATH79_MACH_TL_MR3220, "TL-MR3220", "TP-LINK TL-MR3220", - tl_mr3220_setup); - -static void __init tl_mr3420_setup(void) -{ - tl_ap99_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio), - tl_mr3x20_leds_gpio); - ap9x_pci_setup_wmac_led_pin(0, 0); - tl_mr3x20_usb_setup(); -} - -MIPS_MACHINE(ATH79_MACH_TL_MR3420, "TL-MR3420", "TP-LINK TL-MR3420", - tl_mr3420_setup); - -static void __init tl_wr841n_v7_setup(void) -{ - tl_ap99_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio) - 1, - tl_mr3x20_leds_gpio); - ap9x_pci_setup_wmac_led_pin(0, 0); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR841N_V7, "TL-WR841N-v7", - "TP-LINK TL-WR841N/ND v7", tl_wr841n_v7_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c deleted file mode 100644 index be49c89cab..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * TP-LINK TL-MR6400 board support - * - * Copyright (C) 2017 Filip Moc <lede@moc6.cz> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * DAMAGES ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_MR6400_GPIO_LTE_POWER 4 -#define TL_MR6400_GPIO_BTN_RESET 12 /* SW2 */ -#define TL_MR6400_GPIO_BTN_RFKILL 14 /* SW3 */ -#define TL_MR6400_GPIO_LED_WAN 0 /* D12 */ -#define TL_MR6400_GPIO_LED_4G 1 /* D11 */ -#define TL_MR6400_GPIO_LED_WPS 3 /* D5 */ -#define TL_MR6400_GPIO_LED_WLAN 11 /* D3 */ -#define TL_MR6400_GPIO_LED_POWER 13 /* D2 */ -#define TL_MR6400_GPIO_LED_LAN 16 /* D4 */ - -#define TL_MR6400_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_MR6400_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR6400_KEYS_POLL_INTERVAL) - -#define TL_MR6400_WMAC_CALDATA_OFFSET 0x1000 - -static const char *tl_mr6400_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_mr6400_flash_data = { - .part_probes = tl_mr6400_part_probes, - .type = "w25q64", -}; - -static struct gpio_led tl_mr6400_leds_gpio[] __initdata = { - { - .name = "tp-link:white:wan", - .gpio = TL_MR6400_GPIO_LED_WAN, - .active_low = 0, - }, - { - .name = "tp-link:white:4g", - .gpio = TL_MR6400_GPIO_LED_4G, - .active_low = 0, - }, - { - .name = "tp-link:white:wps", - .gpio = TL_MR6400_GPIO_LED_WPS, - .active_low = 0, - }, - { - .name = "tp-link:white:wlan", - .gpio = TL_MR6400_GPIO_LED_WLAN, - .active_low = 0, - }, - { - .name = "tp-link:white:power", - .gpio = TL_MR6400_GPIO_LED_POWER, - .active_low = 0, - }, - { - .name = "tp-link:white:lan", - .gpio = TL_MR6400_GPIO_LED_LAN, - .active_low = 0, - }, -}; - -static struct gpio_keys_button tl_mr6400_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_MR6400_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR6400_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "rfkill", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = TL_MR6400_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR6400_GPIO_BTN_RFKILL, - .active_low = 1, - }, -}; - -static void __init tl_mr6400_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(&tl_mr6400_flash_data); - - ath79_register_mdio(0, 0x0); - - /* LAN1, LAN2, LAN3 */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask |= BIT(0); - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); - ath79_register_eth(1); - - /* LAN4 / WAN */ - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_register_eth(0); - - ath79_register_wmac(art + TL_MR6400_WMAC_CALDATA_OFFSET, mac); - - ath79_register_leds_gpio(-1, - ARRAY_SIZE(tl_mr6400_leds_gpio), - tl_mr6400_leds_gpio); - - ath79_register_gpio_keys_polled(-1, - TL_MR6400_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_mr6400_gpio_keys), - tl_mr6400_gpio_keys); - - gpio_request_one(TL_MR6400_GPIO_LTE_POWER, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED | GPIOF_ACTIVE_LOW, - "LTE power"); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_TL_MR6400, "TL-MR6400", "TP-LINK TL-MR6400", - tl_mr6400_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa701nd-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa701nd-v2.c deleted file mode 100644 index aab92b30d4..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa701nd-v2.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * TP-LINK TL-WA701ND v2 board support - * - * Copyright (C) 2015 Luigi Tarenga <luigi.tarenga@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WA701NDV2_GPIO_LED_WLAN 0 -#define TL_WA701NDV2_GPIO_LED_QSS 1 -#define TL_WA701NDV2_GPIO_LED_LAN 17 -#define TL_WA701NDV2_GPIO_LED_SYSTEM 27 - -#define TL_WA701NDV2_GPIO_BTN_RESET 11 -#define TL_WA701NDV2_GPIO_BTN_QSS 26 - -#define TL_WA701NDV2_GPIO_USB_POWER 8 - -#define TL_WA701NDV2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WA701NDV2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA701NDV2_KEYS_POLL_INTERVAL) - -static const char *tl_wa701ndv2_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wa701ndv2_flash_data = { - .part_probes = tl_wa701ndv2_part_probes, -}; - -static struct gpio_led tl_wa701ndv2_leds_gpio[] __initdata = { - { - .name = "tp-link:green:wlan", - .gpio = TL_WA701NDV2_GPIO_LED_WLAN, - .active_low = 0, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WA701NDV2_GPIO_LED_QSS, - .active_low = 0, - }, { - .name = "tp-link:green:lan", - .gpio = TL_WA701NDV2_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "tp-link:green:system", - .gpio = TL_WA701NDV2_GPIO_LED_SYSTEM, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_wa701ndv2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WA701NDV2_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA701NDV2_GPIO_BTN_RESET, - .active_low = 0, - } , { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WA701NDV2_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA701NDV2_GPIO_BTN_QSS, - .active_low = 0, - } - -}; - -static void __init tl_wa701ndv2_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa701ndv2_leds_gpio), - tl_wa701ndv2_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WA701NDV2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wa701ndv2_gpio_keys), - tl_wa701ndv2_gpio_keys); - - gpio_request_one(TL_WA701NDV2_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); - - ath79_register_m25p80(&tl_wa701ndv2_flash_data); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - /* ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); */ - - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_TL_WA701ND_V2, "TL-WA701ND-v2", - "TP-LINK TL-WA701ND v2", tl_wa701ndv2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa7210n-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa7210n-v2.c deleted file mode 100644 index 276353a6c3..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa7210n-v2.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * TP-LINK TL-WA7210N v2.1 board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2014 Nicolas Braud-Santoni <nicolas@braud-santoni.eu> - * Copyright (C) 2014 Alexander List <alex@graz.funkfeuer.at> - * Copyright (C) 2015 Hendrik Frenzel <hfrenzel@scunc.net> - * - * rebased on TL-WA7510Nv1 support, - * Copyright (C) 2012 Stefan Helmert <helst_listen@aol.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "dev-dsa.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#include "common.h" - -#define TL_WA7210N_V2_GPIO_BTN_RESET 11 -#define TL_WA7210N_V2_KEYS_POLL_INT 20 -#define TL_WA7210N_V2_KEYS_DEBOUNCE_INT (3 * TL_WA7210N_V2_KEYS_POLL_INT) - -#define TL_WA7210N_V2_GPIO_LED_LAN 17 -#define TL_WA7210N_V2_GPIO_LED_SIG1 0 -#define TL_WA7210N_V2_GPIO_LED_SIG2 1 -#define TL_WA7210N_V2_GPIO_LED_SIG3 27 -#define TL_WA7210N_V2_GPIO_LED_SIG4 26 - -#define TL_WA7210N_V2_GPIO_LNA_EN 28 - -static const char *tl_wa7210n_v2_part_probes[] = { - "tp-link", - NULL, -}; - -static struct gpio_keys_button tl_wa7210n_v2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WA7210N_V2_KEYS_DEBOUNCE_INT, - .gpio = TL_WA7210N_V2_GPIO_BTN_RESET, - .active_low = 0, - }, -}; - -static struct gpio_led tl_wa7210n_v2_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan", - .gpio = TL_WA7210N_V2_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "tp-link:green:signal1", - .gpio = TL_WA7210N_V2_GPIO_LED_SIG1, - .active_low = 0, - }, { - .name = "tp-link:green:signal2", - .gpio = TL_WA7210N_V2_GPIO_LED_SIG2, - .active_low = 0, - }, { - .name = "tp-link:green:signal3", - .gpio = TL_WA7210N_V2_GPIO_LED_SIG3, - .active_low = 1, - }, { - .name = "tp-link:green:signal4", - .gpio = TL_WA7210N_V2_GPIO_LED_SIG4, - .active_low = 1, - }, -}; - -static struct flash_platform_data tl_wa7210n_v2_flash_data = { - .part_probes = tl_wa7210n_v2_part_probes, -}; - -static void __init tl_wa7210n_v2_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_gpio_keys_polled(-1, TL_WA7210N_V2_KEYS_POLL_INT, - ARRAY_SIZE(tl_wa7210n_v2_gpio_keys), - tl_wa7210n_v2_gpio_keys); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa7210n_v2_leds_gpio), - tl_wa7210n_v2_leds_gpio); - - ath79_gpio_function_enable(TL_WA7210N_V2_GPIO_LNA_EN); - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_mdio(0, 0x0); - - ath79_register_wmac(ee, mac); - - ath79_register_m25p80(&tl_wa7210n_v2_flash_data); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_TL_WA7210N_V2, "TL-WA7210N-v2", "TP-LINK TL-WA7210N v2", - tl_wa7210n_v2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa801nd-v3.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa801nd-v3.c deleted file mode 100644 index 1637382192..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa801nd-v3.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * TP-LINK TL-WA801ND v3 adapted from TP-LINK TL-WR841N/ND v9 - * TP-LINK TL-WA801ND v4 - * - * Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net> - * Copyright (C) 2016 Tiziano Bacocco <tizbac2@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WA801NDV3_GPIO_LED_WLAN 12 -#define TL_WA801NDV3_GPIO_LED_SYSTEM 13 -#define TL_WA801NDV3_GPIO_LED_SECURITY_RED 11 -#define TL_WA801NDV3_GPIO_LED_SECURITY_GREEN 15 -#define TL_WA801NDV3_GPIO_LED_LAN 3 - -#define TL_WA801NDV3_GPIO_BTN_RESET 2 -#define TL_WA801NDV3_GPIO_BTN_WIFI 1 - -#define TL_WA801NDV3_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WA801NDV3_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA801NDV3_KEYS_POLL_INTERVAL) - -static const char *tl_wa801n_v3_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wa801n_v3_flash_data = { - .part_probes = tl_wa801n_v3_part_probes, -}; - -static struct gpio_led tl_wa801n_v3_leds_gpio[] __initdata = { - { - .name = "tp-link:green:system", - .gpio = TL_WA801NDV3_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:lan", - .gpio = TL_WA801NDV3_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WA801NDV3_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "tp-link:red:security", - .gpio = TL_WA801NDV3_GPIO_LED_SECURITY_RED, - .active_low = 0, - }, { - .name = "tp-link:green:security", - .gpio = TL_WA801NDV3_GPIO_LED_SECURITY_GREEN, - .active_low = 0, - } - -}; - -static struct gpio_keys_button tl_wa801n_v3_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WA801NDV3_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA801NDV3_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "WIFI button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = TL_WA801NDV3_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA801NDV3_GPIO_BTN_WIFI, - .active_low = 1, - } -}; - - -static void __init tl_ap143_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - u8 tmpmac[ETH_ALEN]; - - ath79_register_m25p80(&tl_wa801n_v3_flash_data); - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_mdio(0, 0x0); - - /* LAN */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_switch_data.phy_poll_mask |= BIT(4); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - ath79_register_eth(1); - - /* WAN */ - ath79_switch_data.phy4_mii_en = 1; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.phy_mask = BIT(4); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_register_eth(0); - - ath79_init_mac(tmpmac, mac, 0); - ath79_register_wmac(ee, tmpmac); -} - -static void __init tl_wa801n_v3_setup(void) -{ - tl_ap143_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa801n_v3_leds_gpio), - tl_wa801n_v3_leds_gpio); - - ath79_register_gpio_keys_polled(1, TL_WA801NDV3_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wa801n_v3_gpio_keys), - tl_wa801n_v3_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_WA801ND_V3, "TL-WA801ND-v3", "TP-LINK TL-WA801ND v3", - tl_wa801n_v3_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa830re-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa830re-v2.c deleted file mode 100644 index 1c74fed98e..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa830re-v2.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * TP-LINK TL-WA830RE v2 board support - * - * Copyright (C) 2014 Fredrik Jonson <fredrik@famjonson.se> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WA830REV2_GPIO_LED_WLAN 13 -#define TL_WA830REV2_GPIO_LED_QSS 15 -#define TL_WA830REV2_GPIO_LED_LAN 18 -#define TL_WA830REV2_GPIO_LED_SYSTEM 14 - -#define TL_WA830REV2_GPIO_BTN_RESET 17 -#define TL_WA830REV2_GPIO_SW_RFKILL 16 /* WPS for MR3420 v2 */ - -#define TL_WA830REV2_GPIO_USB_POWER 4 - -#define TL_WA830REV2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA830REV2_KEYS_POLL_INTERVAL) - -static const char *tl_wa830re_v2_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wa830re_v2_flash_data = { - .part_probes = tl_wa830re_v2_part_probes, -}; - -static struct gpio_led tl_wa830re_v2_leds_gpio[] __initdata = { - { - .name = "tp-link:green:qss", - .gpio = TL_WA830REV2_GPIO_LED_QSS, - .active_low = 1, - }, { - .name = "tp-link:green:system", - .gpio = TL_WA830REV2_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:lan", - .gpio = TL_WA830REV2_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WA830REV2_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wa830re_v2_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA830REV2_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "RFKILL switch", - .type = EV_SW, - .code = KEY_RFKILL, - .debounce_interval = TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA830REV2_GPIO_SW_RFKILL, - .active_low = 0, - } -}; - -static void __init tl_ap123_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - /* Disable JTAG, enabling GPIOs 0-3 */ - /* Configure OBS4 line, for GPIO 4*/ - ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE, - AR934X_GPIO_FUNC_CLK_OBS4_EN); - - /* config gpio4 as normal gpio function */ - ath79_gpio_output_select(TL_WA830REV2_GPIO_USB_POWER, - AR934X_GPIO_OUT_GPIO); - - ath79_register_m25p80(&tl_wa830re_v2_flash_data); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP); - - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - - /* GMAC0 is connected to the PHY0 of the internal switch */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_register_eth(0); - - ath79_register_wmac(ee, mac); -} - -static void __init tl_wa830re_v2_setup(void) -{ - tl_ap123_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa830re_v2_leds_gpio) - 1, - tl_wa830re_v2_leds_gpio); - - ath79_register_gpio_keys_polled(1, TL_WA830REV2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wa830re_v2_gpio_keys), - tl_wa830re_v2_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_WA830RE_V2, "TL-WA830RE-v2", "TP-LINK TL-WA830RE v2", - tl_wa830re_v2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v2.c deleted file mode 100644 index b4fb2a9f91..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v2.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * TP-LINK TL-WA901N/ND v2 board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com> - * Copyright (C) 2011 Jonathan Bennett <jbscience87@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "dev-eth.h" -#include "dev-m25p80.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WA901ND_V2_GPIO_LED_QSS 4 -#define TL_WA901ND_V2_GPIO_LED_SYSTEM 2 -#define TL_WA901ND_V2_GPIO_LED_WLAN 9 - -#define TL_WA901ND_V2_GPIO_BTN_RESET 3 -#define TL_WA901ND_V2_GPIO_BTN_QSS 7 - -#define TL_WA901ND_V2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL \ - (3 * TL_WA901ND_V2_KEYS_POLL_INTERVAL) - -static const char *tl_wa901nd_v2_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wa901nd_v2_flash_data = { - .part_probes = tl_wa901nd_v2_part_probes, -}; - -static struct gpio_led tl_wa901nd_v2_leds_gpio[] __initdata = { - { - .name = "tp-link:green:system", - .gpio = TL_WA901ND_V2_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WA901ND_V2_GPIO_LED_QSS, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WA901ND_V2_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_wa901nd_v2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA901ND_V2_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA901ND_V2_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static void __init tl_wa901nd_v2_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = 0x00001000; - ath79_register_mdio(0, 0x0); - - ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC | - AR71XX_RESET_GE0_PHY; - ath79_register_eth(0); - - ath79_register_m25p80(&tl_wa901nd_v2_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_v2_leds_gpio), - tl_wa901nd_v2_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WA901ND_V2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wa901nd_v2_gpio_keys), - tl_wa901nd_v2_gpio_keys); - - ath79_register_wmac(eeprom, mac); -} - -MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V2, "TL-WA901ND-v2", - "TP-LINK TL-WA901ND v2", tl_wa901nd_v2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v4.c deleted file mode 100644 index ffbcd6fe42..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v4.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * TP-LINK TL-WA901ND v4, v5 board - * - * Copyright (C) 2015 Matthias Schiffer <mschiffer@universe-factory.net> - * Copyright (C) 2016 Tiziano Bacocco <tizbac2@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - - -#define TL_WA901ND_V4_GPIO_LED_QSS 3 -#define TL_WA901ND_V4_GPIO_LED_LAN 7 -#define TL_WA901ND_V4_GPIO_LED_WLAN 8 -#define TL_WA901ND_V4_GPIO_LED_SYSTEM 18 - -#define TL_WA901ND_V4_GPIO_BTN_RESET 1 - -#define TL_WA901ND_V4_KEYS_POLL_INTERVAL 20 -#define TL_WA901ND_V4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_V4_KEYS_POLL_INTERVAL) - - -static struct gpio_led TL_WA901ND_V4_leds_gpio[] __initdata = { - { - .name = "tp-link:green:qss", - .gpio = TL_WA901ND_V4_GPIO_LED_QSS, - .active_low = 1, - }, - { - .name = "tp-link:green:lan", - .gpio = TL_WA901ND_V4_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "tp-link:green:wlan", - .gpio = TL_WA901ND_V4_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "tp-link:green:system", - .gpio = TL_WA901ND_V4_GPIO_LED_SYSTEM, - .active_low = 1, - }, -}; - -static struct gpio_keys_button TL_WA901ND_V4_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WA901ND_V4_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA901ND_V4_GPIO_BTN_RESET, - .active_low = 1, - } -}; - - -static const char *tl_wa901nd_v4_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wa901nd_v4_flash_data = { - .part_probes = tl_wa901nd_v4_part_probes, -}; - - -static void __init TL_WA901ND_V4_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(&tl_wa901nd_v4_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(TL_WA901ND_V4_leds_gpio), - TL_WA901ND_V4_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WA901ND_V4_KEYS_POLL_INTERVAL, - ARRAY_SIZE(TL_WA901ND_V4_gpio_keys), - TL_WA901ND_V4_gpio_keys); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); - - ath79_switch_data.phy4_mii_en = 1; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_wmac(ee, mac); - -} - -MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V4, "TL-WA901ND-v4", "TP-LINK TL-WA901ND v4", - TL_WA901ND_V4_setup); - -MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V5, "TL-WA901ND-v5", "TP-LINK TL-WA901ND v5", - TL_WA901ND_V4_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd.c deleted file mode 100644 index 957b92cba6..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * TP-LINK TL-WA901N/ND v1, TL-WA7510N v1 board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com> - * Copyright (C) 2012 Stefan Helmert <helst_listen@aol.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" -#include "pci.h" - -#define TL_WA901ND_GPIO_LED_QSS 0 -#define TL_WA901ND_GPIO_LED_SYSTEM 1 -#define TL_WA901ND_GPIO_LED_LAN 13 - -#define TL_WA901ND_GPIO_BTN_RESET 11 -#define TL_WA901ND_GPIO_BTN_QSS 12 - -#define TL_WA901ND_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WA901ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_KEYS_POLL_INTERVAL) - -static const char *tl_wa901nd_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wa901nd_flash_data = { - .part_probes = tl_wa901nd_part_probes, -}; - -static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan", - .gpio = TL_WA901ND_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "tp-link:green:system", - .gpio = TL_WA901ND_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WA901ND_GPIO_LED_QSS, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_wa901nd_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA901ND_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA901ND_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static void __init common_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - - /* - * ath79_eth0 would be the WAN port, but is not connected. - * ath79_eth1 connects to the internal switch chip, however - * we have a single LAN port only. - */ - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - ath79_register_mdio(0, 0x0); - ath79_register_eth(1); - - ath79_register_m25p80(&tl_wa901nd_flash_data); -} - -static void __init tl_wa901nd_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - common_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio), - tl_wa901nd_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WA901ND_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wa901nd_gpio_keys), - tl_wa901nd_gpio_keys); - - ap91_pci_init(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND", - tl_wa901nd_setup); - -static void __init tl_wa7510n_v1_setup(void) -{ - common_setup(); - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_TL_WA7510N_V1, "TL-WA7510N", "TP-LINK TL-WA7510N v1", - tl_wa7510n_v1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c deleted file mode 100644 index 955628fecb..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c +++ /dev/null @@ -1,445 +0,0 @@ -/* - * Support for TP-Link boards: - * - TL-WA750RE v1 - * - TL-WA801ND v2 - * - TL-WA850RE v1/v2 - * - TL-WA855RE v1 - * - TL-WA901ND v3 - * - * Copyright (C) 2013 Martijn Zilverschoon <thefriedzombie@gmail.com> - * Copyright (C) 2013 Jiri Pirko <jiri@resnulli.us> - * Copyright (C) 2017 Piotr Dymacz <pepe2k@gmail.com> - * Copyright (C) 2017 Federico Cappon <dududede371@gmail.com> - * Copyright (C) 2017 Nicolò Veronese <nicveronese@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WAX50RE_GPIO_LED_LAN 20 -#define TL_WAX50RE_GPIO_LED_WLAN 13 -#define TL_WAX50RE_GPIO_LED_RE 15 -#define TL_WAX50RE_GPIO_LED_SIGNAL1 0 -#define TL_WAX50RE_GPIO_LED_SIGNAL2 1 -#define TL_WAX50RE_GPIO_LED_SIGNAL3 2 -#define TL_WAX50RE_GPIO_LED_SIGNAL4 3 -#define TL_WAX50RE_GPIO_LED_SIGNAL5 4 - -#define TL_WA850RE_V2_GPIO_LED_LAN 14 -#define TL_WA850RE_V2_GPIO_LED_RE 12 -#define TL_WA850RE_V2_GPIO_LED_SIGNAL1 0 -#define TL_WA850RE_V2_GPIO_LED_SIGNAL2 1 -#define TL_WA850RE_V2_GPIO_LED_SIGNAL3 2 -#define TL_WA850RE_V2_GPIO_LED_SIGNAL4 3 -#define TL_WA850RE_V2_GPIO_LED_SIGNAL5 4 -#define TL_WA850RE_V2_GPIO_LED_WLAN 13 - -#define TL_WA850RE_V2_GPIO_ENABLE_LEDS 15 - -#define TL_WA855REV1_GPIO_LED_RED 11 -#define TL_WA855REV1_GPIO_LED_GREEN 12 - -#define TL_WA860RE_GPIO_LED_WLAN_ORANGE 0 -#define TL_WA860RE_GPIO_LED_WLAN_GREEN 2 -#define TL_WA860RE_GPIO_LED_POWER_ORANGE 12 -#define TL_WA860RE_GPIO_LED_POWER_GREEN 14 -#define TL_WA860RE_GPIO_LED_LAN 20 - -#define TL_WA801ND_V2_GPIO_LED_LAN 18 -#define TL_WA801ND_V2_GPIO_LED_SYSTEM 14 - -#define TL_WAX50RE_GPIO_BTN_RESET 17 -#define TL_WAX50RE_GPIO_BTN_WPS 16 - -#define TL_WA860RE_GPIO_BTN_RESET 17 -#define TL_WA860RE_GPIO_BTN_WPS 16 -#define TL_WA860RE_GPIO_BTN_ONOFF 11 - -#define TL_WAX50RE_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL (3 * TL_WAX50RE_KEYS_POLL_INTERVAL) - -static const char *tl_wax50re_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wax50re_flash_data = { - .part_probes = tl_wax50re_part_probes, -}; - -static struct gpio_led tl_wa750re_leds_gpio[] __initdata = { - { - .name = "tp-link:orange:lan", - .gpio = TL_WAX50RE_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "tp-link:orange:wlan", - .gpio = TL_WAX50RE_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "tp-link:orange:re", - .gpio = TL_WAX50RE_GPIO_LED_RE, - .active_low = 1, - }, { - .name = "tp-link:orange:signal1", - .gpio = TL_WAX50RE_GPIO_LED_SIGNAL1, - .active_low = 1, - }, { - .name = "tp-link:orange:signal2", - .gpio = TL_WAX50RE_GPIO_LED_SIGNAL2, - .active_low = 1, - }, { - .name = "tp-link:orange:signal3", - .gpio = TL_WAX50RE_GPIO_LED_SIGNAL3, - .active_low = 1, - }, { - .name = "tp-link:orange:signal4", - .gpio = TL_WAX50RE_GPIO_LED_SIGNAL4, - .active_low = 1, - }, { - .name = "tp-link:orange:signal5", - .gpio = TL_WAX50RE_GPIO_LED_SIGNAL5, - .active_low = 1, - }, -}; - -static struct gpio_led tl_wa850re_leds_gpio[] __initdata = { - { - .name = "tp-link:blue:lan", - .gpio = TL_WAX50RE_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "tp-link:blue:wlan", - .gpio = TL_WAX50RE_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "tp-link:blue:re", - .gpio = TL_WAX50RE_GPIO_LED_RE, - .active_low = 1, - }, { - .name = "tp-link:blue:signal1", - .gpio = TL_WAX50RE_GPIO_LED_SIGNAL1, - .active_low = 1, - }, { - .name = "tp-link:blue:signal2", - .gpio = TL_WAX50RE_GPIO_LED_SIGNAL2, - .active_low = 1, - }, { - .name = "tp-link:blue:signal3", - .gpio = TL_WAX50RE_GPIO_LED_SIGNAL3, - .active_low = 1, - }, { - .name = "tp-link:blue:signal4", - .gpio = TL_WAX50RE_GPIO_LED_SIGNAL4, - .active_low = 1, - }, { - .name = "tp-link:blue:signal5", - .gpio = TL_WAX50RE_GPIO_LED_SIGNAL5, - .active_low = 1, - }, -}; - -static struct gpio_led tl_wa850re_v2_leds_gpio[] __initdata = { - { - .name = "tp-link:blue:lan", - .gpio = TL_WA850RE_V2_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "tp-link:blue:re", - .gpio = TL_WA850RE_V2_GPIO_LED_RE, - .active_low = 1, - }, { - .name = "tp-link:blue:signal1", - .gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL1, - .active_low = 1, - }, { - .name = "tp-link:blue:signal2", - .gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL2, - .active_low = 1, - }, { - .name = "tp-link:blue:signal3", - .gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL3, - .active_low = 1, - }, { - .name = "tp-link:blue:signal4", - .gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL4, - .active_low = 1, - }, { - .name = "tp-link:blue:signal5", - .gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL5, - .active_low = 1, - }, { - .name = "tp-link:blue:wlan", - .gpio = TL_WA850RE_V2_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static struct gpio_led tl_wa855re_v1_leds_gpio[] __initdata = { - { - .name = "tp-link:green:power", - .gpio = TL_WA855REV1_GPIO_LED_GREEN, - .active_low = 0, - }, { - .name = "tp-link:red:power", - .gpio = TL_WA855REV1_GPIO_LED_RED, - .active_low = 0, - }, -}; - -static struct gpio_led tl_wa860re_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan", - .gpio = TL_WA860RE_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "tp-link:green:power", - .gpio = TL_WA860RE_GPIO_LED_POWER_GREEN, - .active_low = 1, - }, { - .name = "tp-link:orange:power", - .gpio = TL_WA860RE_GPIO_LED_POWER_ORANGE, - .active_low = 1, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WA860RE_GPIO_LED_WLAN_GREEN, - .active_low = 1, - }, { - .name = "tp-link:orange:wlan", - .gpio = TL_WA860RE_GPIO_LED_WLAN_ORANGE, - .active_low = 1, - }, -}; - - -static struct gpio_keys_button tl_wax50re_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WAX50RE_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "WPS", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WAX50RE_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wa860re_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA860RE_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "WPS", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA860RE_GPIO_BTN_WPS, - .active_low = 1, - }, { - .desc = "ONOFF", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WA860RE_GPIO_BTN_ONOFF, - .active_low = 1, - }, -}; - -static struct gpio_led tl_wa801nd_v2_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan", - .gpio = TL_WA801ND_V2_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WAX50RE_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WAX50RE_GPIO_LED_RE, - .active_low = 1, - }, { - .name = "tp-link:green:system", - .gpio = TL_WA801ND_V2_GPIO_LED_SYSTEM, - .active_low = 1, - }, -}; - -static void __init tl_ap123_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(&tl_wax50re_flash_data); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP); - - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_register_eth(0); - - ath79_register_wmac(ee, mac); -} - -static void __init tl_ap143_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f3c0008); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - u8 tmpmac[ETH_ALEN]; - - ath79_register_m25p80(NULL); - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_mdio(0, 0x0); - - ath79_switch_data.phy4_mii_en = 1; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.speed = SPEED_100; - ath79_init_mac(ath79_eth0_data.mac_addr, mac, -2); - ath79_register_eth(0); - - ath79_init_mac(tmpmac, mac, 0); - ath79_register_wmac(ee, mac); -} - -static void __init tl_wa750re_setup(void) -{ - tl_ap123_setup(); - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa750re_leds_gpio), - tl_wa750re_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wax50re_gpio_keys), - tl_wax50re_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_WA750RE, "TL-WA750RE", "TP-LINK TL-WA750RE", - tl_wa750re_setup); - -static void __init tl_wa801nd_v2_setup(void) -{ - tl_ap123_setup(); - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa801nd_v2_leds_gpio), - tl_wa801nd_v2_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wax50re_gpio_keys), - tl_wax50re_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_WA801ND_V2, "TL-WA801ND-v2", "TP-LINK TL-WA801ND v2", - tl_wa801nd_v2_setup); - -static void __init tl_wa850re_setup(void) -{ - tl_ap123_setup(); - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa850re_leds_gpio), - tl_wa850re_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wax50re_gpio_keys), - tl_wax50re_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_WA850RE, "TL-WA850RE", "TP-LINK TL-WA850RE", - tl_wa850re_setup); - -static void __init tl_wa850re_v2_setup(void) -{ - tl_ap143_setup(); - - /* For GPIO 0~4 */ - ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE, - AR934X_GPIO_FUNC_CLK_OBS4_EN); - - /* Allow to enable/disable all LEDs from userspace */ - gpio_request_one(TL_WA850RE_V2_GPIO_ENABLE_LEDS, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "LEDs enable"); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa850re_v2_leds_gpio), - tl_wa850re_v2_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wax50re_gpio_keys), - tl_wax50re_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_WA850RE_V2, "TL-WA850RE-V2", - "TP-LINK TL-WA850RE v2", tl_wa850re_v2_setup); - -static void __init tl_wa855re_v1_setup(void) -{ - tl_ap143_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa855re_v1_leds_gpio), - tl_wa855re_v1_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wax50re_gpio_keys), - tl_wax50re_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_WA855RE_V1, "TL-WA855RE-v1", "TP-LINK TL-WA855RE v1", - tl_wa855re_v1_setup); - -static void __init tl_wa860re_setup(void) -{ - tl_ap123_setup(); - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa860re_leds_gpio), - tl_wa860re_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wa860re_gpio_keys), - tl_wa860re_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_WA860RE, "TL-WA860RE", "TP-LINK TL-WA860RE", - tl_wa860re_setup); - -static void __init tl_wa901nd_v3_setup(void) -{ - tl_ap123_setup(); - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa801nd_v2_leds_gpio), - tl_wa801nd_v2_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wax50re_gpio_keys) - 1, - tl_wax50re_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V3, "TL-WA901ND-v3", "TP-LINK TL-WA901ND v3", - tl_wa901nd_v3_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3320-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3320-v2.c deleted file mode 100644 index 3e452f2a4a..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3320-v2.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * TP-LINK TL-WDR3320 v2 board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2015 Weijie Gao <hackpascal@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define WDR3320_GPIO_LED_WLAN5G 12 -#define WDR3320_GPIO_LED_SYSTEM 14 -#define WDR3320_GPIO_LED_QSS 15 -#define WDR3320_GPIO_LED_WAN 4 -#define WDR3320_GPIO_LED_LAN1 18 -#define WDR3320_GPIO_LED_LAN2 20 -#define WDR3320_GPIO_LED_LAN3 21 -#define WDR3320_GPIO_LED_LAN4 22 - -#define WDR3320_GPIO_BTN_RESET 16 - -#define WDR3320_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WDR3320_KEYS_DEBOUNCE_INTERVAL (3 * WDR3320_KEYS_POLL_INTERVAL) - -#define WDR3320_WMAC_CALDATA_OFFSET 0x1000 -#define WDR3320_PCIE_CALDATA_OFFSET 0x5000 - -static const char *wdr3320_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data wdr3320_flash_data = { - .part_probes = wdr3320_part_probes, -}; - -static struct gpio_led wdr3320_leds_gpio[] __initdata = { - { - .name = "tp-link:green:qss", - .gpio = WDR3320_GPIO_LED_QSS, - .active_low = 1, - }, - { - .name = "tp-link:green:system", - .gpio = WDR3320_GPIO_LED_SYSTEM, - .active_low = 1, - }, - { - .name = "tp-link:green:wlan5g", - .gpio = WDR3320_GPIO_LED_WLAN5G, - .active_low = 1, - }, -}; - -static struct gpio_keys_button wdr3320_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WDR3320_KEYS_DEBOUNCE_INTERVAL, - .gpio = WDR3320_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static void __init wdr3320_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 tmpmac[ETH_ALEN]; - - ath79_register_m25p80(&wdr3320_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr3320_leds_gpio), - wdr3320_leds_gpio); - ath79_register_gpio_keys_polled(-1, WDR3320_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wdr3320_gpio_keys), - wdr3320_gpio_keys); - - ath79_init_mac(tmpmac, mac, 0); - ath79_register_wmac(art + WDR3320_WMAC_CALDATA_OFFSET, tmpmac); - - ath79_init_mac(tmpmac, mac, -1); - ap9x_pci_setup_wmac_led_pin(0, 0); - ap91_pci_init(art + WDR3320_PCIE_CALDATA_OFFSET, tmpmac); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); - - ath79_register_mdio(1, 0x0); - - /* LAN */ - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - - /* GMAC1 is connected to the internal switch */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - - ath79_register_eth(1); - - /* WAN */ - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - - /* GMAC0 is connected to the PHY4 of the internal switch */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(4); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - - ath79_register_eth(0); - - ath79_register_usb(); - - ath79_gpio_output_select(WDR3320_GPIO_LED_LAN1, - AR934X_GPIO_OUT_LED_LINK0); - ath79_gpio_output_select(WDR3320_GPIO_LED_LAN2, - AR934X_GPIO_OUT_LED_LINK1); - ath79_gpio_output_select(WDR3320_GPIO_LED_LAN3, - AR934X_GPIO_OUT_LED_LINK2); - ath79_gpio_output_select(WDR3320_GPIO_LED_LAN4, - AR934X_GPIO_OUT_LED_LINK3); - ath79_gpio_output_select(WDR3320_GPIO_LED_WAN, - AR934X_GPIO_OUT_LED_LINK4); -} - -MIPS_MACHINE(ATH79_MACH_TL_WDR3320_V2, "TL-WDR3320-v2", - "TP-LINK TL-WDR3320 v2", - wdr3320_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3500.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3500.c deleted file mode 100644 index 452c20b777..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3500.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - * TP-LINK TL-WDR3500 board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2013 Gui Iribarren <gui@altermundi.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define WDR3500_GPIO_LED_USB 11 -#define WDR3500_GPIO_LED_WLAN2G 13 -#define WDR3500_GPIO_LED_SYSTEM 14 -#define WDR3500_GPIO_LED_QSS 15 -#define WDR3500_GPIO_LED_WAN 18 -#define WDR3500_GPIO_LED_LAN1 19 -#define WDR3500_GPIO_LED_LAN2 20 -#define WDR3500_GPIO_LED_LAN3 21 -#define WDR3500_GPIO_LED_LAN4 22 - -#define WDR3500_GPIO_BTN_WPS 16 -#define WDR3500_GPIO_BTN_RFKILL 17 - -#define WDR3500_GPIO_USB_POWER 12 - -#define WDR3500_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WDR3500_KEYS_DEBOUNCE_INTERVAL (3 * WDR3500_KEYS_POLL_INTERVAL) - -#define WDR3500_MAC0_OFFSET 0 -#define WDR3500_MAC1_OFFSET 6 -#define WDR3500_WMAC_CALDATA_OFFSET 0x1000 -#define WDR3500_PCIE_CALDATA_OFFSET 0x5000 - -static const char *wdr3500_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data wdr3500_flash_data = { - .part_probes = wdr3500_part_probes, -}; - -static struct gpio_led wdr3500_leds_gpio[] __initdata = { - { - .name = "tp-link:green:qss", - .gpio = WDR3500_GPIO_LED_QSS, - .active_low = 1, - }, - { - .name = "tp-link:green:system", - .gpio = WDR3500_GPIO_LED_SYSTEM, - .active_low = 1, - }, - { - .name = "tp-link:green:usb", - .gpio = WDR3500_GPIO_LED_USB, - .active_low = 1, - }, - { - .name = "tp-link:green:wlan2g", - .gpio = WDR3500_GPIO_LED_WLAN2G, - .active_low = 1, - }, -}; - -static struct gpio_keys_button wdr3500_gpio_keys[] __initdata = { - { - .desc = "QSS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WDR3500_KEYS_DEBOUNCE_INTERVAL, - .gpio = WDR3500_GPIO_BTN_WPS, - .active_low = 1, - }, - { - .desc = "RFKILL switch", - .type = EV_SW, - .code = KEY_RFKILL, - .debounce_interval = WDR3500_KEYS_DEBOUNCE_INTERVAL, - .gpio = WDR3500_GPIO_BTN_RFKILL, - }, -}; - - -static void __init wdr3500_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 tmpmac[ETH_ALEN]; - - ath79_register_m25p80(&wdr3500_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr3500_leds_gpio), - wdr3500_leds_gpio); - ath79_register_gpio_keys_polled(-1, WDR3500_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wdr3500_gpio_keys), - wdr3500_gpio_keys); - - ath79_init_mac(tmpmac, mac, 0); - ath79_register_wmac(art + WDR3500_WMAC_CALDATA_OFFSET, tmpmac); - - ath79_init_mac(tmpmac, mac, 1); - ap9x_pci_setup_wmac_led_pin(0, 0); - ap91_pci_init(art + WDR3500_PCIE_CALDATA_OFFSET, tmpmac); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); - - ath79_register_mdio(1, 0x0); - - /* LAN */ - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); - - /* GMAC1 is connected to the internal switch */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - - ath79_register_eth(1); - - /* WAN */ - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 2); - - /* GMAC0 is connected to the PHY4 of the internal switch */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(4); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - - ath79_register_eth(0); - - gpio_request_one(WDR3500_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); - - ath79_gpio_output_select(WDR3500_GPIO_LED_LAN1, - AR934X_GPIO_OUT_LED_LINK3); - ath79_gpio_output_select(WDR3500_GPIO_LED_LAN2, - AR934X_GPIO_OUT_LED_LINK2); - ath79_gpio_output_select(WDR3500_GPIO_LED_LAN3, - AR934X_GPIO_OUT_LED_LINK1); - ath79_gpio_output_select(WDR3500_GPIO_LED_LAN4, - AR934X_GPIO_OUT_LED_LINK0); - ath79_gpio_output_select(WDR3500_GPIO_LED_WAN, - AR934X_GPIO_OUT_LED_LINK4); -} - -MIPS_MACHINE(ATH79_MACH_TL_WDR3500, "TL-WDR3500", - "TP-LINK TL-WDR3500", - wdr3500_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c deleted file mode 100644 index b9fea95bc2..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * TP-LINK TL-WDR4300 board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define WDR4300_GPIO_LED_USB1 11 -#define WDR4300_GPIO_LED_USB2 12 -#define WDR4300_GPIO_LED_WLAN2G 13 -#define WDR4300_GPIO_LED_SYSTEM 14 -#define WDR4300_GPIO_LED_QSS 15 - -#define WDR4300_GPIO_BTN_WPS 16 -#define WDR4300_GPIO_BTN_RFKILL 17 - -#define WDR4300_GPIO_EXTERNAL_LNA0 18 -#define WDR4300_GPIO_EXTERNAL_LNA1 19 - -#define WDR4300_GPIO_USB1_POWER 22 -#define WDR4300_GPIO_USB2_POWER 21 - -#define WDR4300_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WDR4300_KEYS_DEBOUNCE_INTERVAL (3 * WDR4300_KEYS_POLL_INTERVAL) - -#define WDR4300_MAC0_OFFSET 0 -#define WDR4300_MAC1_OFFSET 6 -#define WDR4300_WMAC_CALDATA_OFFSET 0x1000 -#define WDR4300_PCIE_CALDATA_OFFSET 0x5000 - -static const char *wdr4300_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data wdr4300_flash_data = { - .part_probes = wdr4300_part_probes, -}; - -static struct gpio_led wdr4300_leds_gpio[] __initdata = { - { - .name = "tp-link:blue:qss", - .gpio = WDR4300_GPIO_LED_QSS, - .active_low = 1, - }, - { - .name = "tp-link:blue:system", - .gpio = WDR4300_GPIO_LED_SYSTEM, - .active_low = 1, - }, - { - .name = "tp-link:green:usb1", - .gpio = WDR4300_GPIO_LED_USB1, - .active_low = 1, - }, - { - .name = "tp-link:green:usb2", - .gpio = WDR4300_GPIO_LED_USB2, - .active_low = 1, - }, - { - .name = "tp-link:blue:wlan2g", - .gpio = WDR4300_GPIO_LED_WLAN2G, - .active_low = 1, - }, -}; - -static struct gpio_keys_button wdr4300_gpio_keys[] __initdata = { - { - .desc = "QSS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WDR4300_KEYS_DEBOUNCE_INTERVAL, - .gpio = WDR4300_GPIO_BTN_WPS, - .active_low = 1, - }, - { - .desc = "RFKILL switch", - .type = EV_SW, - .code = KEY_RFKILL, - .debounce_interval = WDR4300_KEYS_DEBOUNCE_INTERVAL, - .gpio = WDR4300_GPIO_BTN_RFKILL, - .active_low = 1, - }, -}; - -static const struct ar8327_led_info wdr4300_leds_ar8327[] = { - AR8327_LED_INFO(PHY0_0, HW, "tp-link:blue:wan"), - AR8327_LED_INFO(PHY1_0, HW, "tp-link:blue:lan1"), - AR8327_LED_INFO(PHY2_0, HW, "tp-link:blue:lan2"), - AR8327_LED_INFO(PHY3_0, HW, "tp-link:blue:lan3"), - AR8327_LED_INFO(PHY4_0, HW, "tp-link:blue:lan4"), -}; - -static struct ar8327_pad_cfg wdr4300_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_led_cfg wdr4300_ar8327_led_cfg = { - .led_ctrl0 = 0xc737c737, - .led_ctrl1 = 0x00000000, - .led_ctrl2 = 0x00000000, - .led_ctrl3 = 0x0030c300, - .open_drain = false, -}; - -static struct ar8327_platform_data wdr4300_ar8327_data = { - .pad0_cfg = &wdr4300_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &wdr4300_ar8327_led_cfg, - .num_leds = ARRAY_SIZE(wdr4300_leds_ar8327), - .leds = wdr4300_leds_ar8327, -}; - -static struct mdio_board_info wdr4300_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &wdr4300_ar8327_data, - }, -}; - -static void __init wdr4300_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 tmpmac[ETH_ALEN]; - - ath79_register_m25p80(&wdr4300_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr4300_leds_gpio), - wdr4300_leds_gpio); - ath79_register_gpio_keys_polled(-1, WDR4300_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wdr4300_gpio_keys), - wdr4300_gpio_keys); - - ath79_wmac_set_ext_lna_gpio(0, WDR4300_GPIO_EXTERNAL_LNA0); - ath79_wmac_set_ext_lna_gpio(1, WDR4300_GPIO_EXTERNAL_LNA1); - - ath79_init_mac(tmpmac, mac, -1); - ath79_register_wmac(art + WDR4300_WMAC_CALDATA_OFFSET, tmpmac); - - ath79_init_mac(tmpmac, mac, 0); - ap9x_pci_setup_wmac_led_pin(0, 0); - ap91_pci_init(art + WDR4300_PCIE_CALDATA_OFFSET, tmpmac); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); - - mdiobus_register_board_info(wdr4300_mdio0_info, - ARRAY_SIZE(wdr4300_mdio0_info)); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - - /* GMAC0 is connected to an AR8327N switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_register_eth(0); - - gpio_request_one(WDR4300_GPIO_USB1_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB1 power"); - gpio_request_one(WDR4300_GPIO_USB2_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB2 power"); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_TL_WDR4300, "TL-WDR4300", - "TP-LINK TL-WDR3600/4300/4310", - wdr4300_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr6500-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr6500-v2.c deleted file mode 100644 index 1e72477646..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr6500-v2.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * TP-LINK TL-WDR6500 v2 - * - * Copyright (C) 2015 Weijie Gao <hackpascal@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define TL_WDR6500_V2_GPIO_LED_SYS 21 -#define TL_WDR6500_V2_GPIO_LED_WAN 18 -#define TL_WDR6500_V2_GPIO_LED_LAN1 17 -#define TL_WDR6500_V2_GPIO_LED_LAN2 16 -#define TL_WDR6500_V2_GPIO_LED_LAN3 15 -#define TL_WDR6500_V2_GPIO_LED_LAN4 14 - -#define TL_WDR6500_V2_GPIO_BTN_RESET 1 - -#define TL_WDR6500_V2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WDR6500_V2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WDR6500_V2_KEYS_POLL_INTERVAL) - -#define TL_WDR6500_V2_WMAC_CALDATA_OFFSET 0x1000 -#define TL_WDR6500_V2_PCIE_CALDATA_OFFSET 0x5000 - -static const char *tl_wdr6500_v2_part_probes[] = { - "tp-link-64k", - NULL, -}; - -static struct flash_platform_data tl_wdr6500_v2_flash_data = { - .part_probes = tl_wdr6500_v2_part_probes, -}; - -static struct gpio_led tl_wdr6500_v2_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan1", - .gpio = TL_WDR6500_V2_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "tp-link:green:lan2", - .gpio = TL_WDR6500_V2_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "tp-link:green:lan3", - .gpio = TL_WDR6500_V2_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "tp-link:green:lan4", - .gpio = TL_WDR6500_V2_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "tp-link:green:wan", - .gpio = TL_WDR6500_V2_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "tp-link:white:system", - .gpio = TL_WDR6500_V2_GPIO_LED_SYS, - .active_low = 0, - }, -}; - -static struct gpio_keys_button tl_wdr6500_v2_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WDR6500_V2_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WDR6500_V2_GPIO_BTN_RESET, - .active_low = 1, - } -}; - - -static void __init tl_ap151_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff0000); - u8 tmpmac[ETH_ALEN]; - - ath79_register_m25p80(&tl_wdr6500_v2_flash_data); - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_mdio(1, 0x0); - - /* WAN */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(4); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_register_eth(0); - - /* LAN */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.speed = SPEED_1000; - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - ath79_register_eth(1); - - ath79_init_mac(tmpmac, mac, -1); - ath79_register_wmac(ee + TL_WDR6500_V2_WMAC_CALDATA_OFFSET, tmpmac); - - ath79_register_pci(); - - ath79_register_usb(); -} - -static void __init tl_wdr6500_v2_setup(void) -{ - tl_ap151_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wdr6500_v2_leds_gpio), - tl_wdr6500_v2_leds_gpio); - - ath79_register_gpio_keys_polled(1, TL_WDR6500_V2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wdr6500_v2_gpio_keys), - tl_wdr6500_v2_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_WDR6500_V2, "TL-WDR6500-v2", "TP-LINK TL-WDR6500 v2", - tl_wdr6500_v2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wpa8630.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wpa8630.c deleted file mode 100644 index a95a11c122..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wpa8630.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * TP-Link TL-WPA8630 board support - * - * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-m25p80.h" -#include "machtypes.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-spi.h" -#include "dev-wmac.h" - -#define TL_WPA8630_KEYS_POLL_INTERVAL 20 -#define TL_WPA8630_KEYS_DEBOUNCE_INTERVAL (3 * TL_WPA8630_KEYS_POLL_INTERVAL) - -#define TL_WPA8630_GPIO_LED_POWER 1 -#define TL_WPA8630_GPIO_LED_LAN 5 -#define TL_WPA8630_GPIO_LED_WLAN 19 -#define TL_WPA8630_GPIO_LED_WLAN5 21 - -#define TL_WPA8630_GPIO_BTN_RESET 2 -#define TL_WPA8630_GPIO_BTN_RFKILL 8 -#define TL_WPA8630_GPIO_BTN_LED 6 -#define TL_WPA8630_GPIO_BTN_PAIR 7 - -#define TL_WPA8630_MAC0_OFFSET 0x0000 -#define TL_WPA8630_WMAC_CALDATA_OFFSET 0x1000 -#define TL_WPA8630_PCI_CALDATA_OFFSET 0x5000 - -static const char *tl_wpa8630_part_probes[] = { - "tp-link-64k", - NULL, -}; - -static struct flash_platform_data tl_wpa8630_flash_data = { - .part_probes = tl_wpa8630_part_probes, - .type = "s25fl064k", -}; - -static struct gpio_led tl_wpa8630_leds_gpio[] __initdata = { - { - .name = "tl-wpa8630:green:power", - .gpio = TL_WPA8630_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "tl-wpa8630:green:lan", - .gpio = TL_WPA8630_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "tl-wpa8630:green:wlan", - .gpio = TL_WPA8630_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "tl-wpa8630:green:wlan5", - .gpio = TL_WPA8630_GPIO_LED_WLAN5, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wpa8630_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WPA8630_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "RFKILL button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WPA8630_GPIO_BTN_RFKILL, - .active_low = 1, - }, - { - .desc = "LED", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WPA8630_GPIO_BTN_LED, - .active_low = 1, - }, - { - .desc = "Pair", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WPA8630_GPIO_BTN_PAIR, - .active_low = 1, - }, -}; - -/* GMAC0 of the QCA8337 switch is connected to the QCA9563 SoC via SGMII */ -static struct ar8327_pad_cfg tl_wpa8630_qca8337_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -static struct ar8327_platform_data tl_wpa8630_qca8337_data = { - .pad0_cfg = &tl_wpa8630_qca8337_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info tl_wpa8630_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &tl_wpa8630_qca8337_data, - }, -}; - -static void __init tl_wpa8630_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00); - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(&tl_wpa8630_flash_data); - - ath79_init_mac(ath79_eth0_data.mac_addr, - art + TL_WPA8630_MAC0_OFFSET, 0); - - platform_device_register(&ath79_mdio0_device); - - mdiobus_register_board_info(tl_wpa8630_mdio0_info, - ARRAY_SIZE(tl_wpa8630_mdio0_info)); - - /* GMAC0 is connected to an AR8337 switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_mask = ~BIT(4); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - - ath79_register_eth(0); - - ath79_register_wmac(art + TL_WPA8630_WMAC_CALDATA_OFFSET, mac); - - ap91_pci_init(art + TL_WPA8630_PCI_CALDATA_OFFSET, NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wpa8630_leds_gpio), - tl_wpa8630_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WPA8630_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wpa8630_gpio_keys), - tl_wpa8630_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_WPA8630, "TL-WPA8630", "TP-LINK TL-WPA8630", - tl_wpa8630_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c deleted file mode 100644 index c98dd4ff00..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * TP-LINK TL-WR1041 v2 board support - * - * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2011-2012 Anan Huang <axishero@foxmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WR1041NV2_GPIO_BTN_RESET 14 -#define TL_WR1041NV2_GPIO_LED_WPS 13 -#define TL_WR1041NV2_GPIO_LED_WLAN 11 - -#define TL_WR1041NV2_GPIO_LED_SYSTEM 12 - -#define TL_WR1041NV2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1041NV2_KEYS_POLL_INTERVAL) - -#define TL_WR1041NV2_PCIE_CALDATA_OFFSET 0x5000 - -static const char *tl_wr1041nv2_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr1041nv2_flash_data = { - .part_probes = tl_wr1041nv2_part_probes, -}; - -static struct gpio_led tl_wr1041nv2_leds_gpio[] __initdata = { - { - .name = "tp-link:green:system", - .gpio = TL_WR1041NV2_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:wps", - .gpio = TL_WR1041NV2_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WR1041NV2_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_wr1041nv2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR1041NV2_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static const struct ar8327_led_info tl_wr1041n_leds_ar8327[] = { - AR8327_LED_INFO(PHY0_0, HW, "tp-link:green:wan"), - AR8327_LED_INFO(PHY1_0, HW, "tp-link:green:lan1"), - AR8327_LED_INFO(PHY2_0, HW, "tp-link:green:lan2"), - AR8327_LED_INFO(PHY3_0, HW, "tp-link:green:lan3"), - AR8327_LED_INFO(PHY4_0, HW, "tp-link:green:lan4"), -}; - -static struct ar8327_led_cfg wr1041n_v2_ar8327_led_cfg = { - .led_ctrl0 = 0xcf35cf35, /* LED0: blink at 10/100/1000M */ - .led_ctrl1 = 0xcf35cf35, /* LED1: blink at 10/100/1000M: anyway, no LED1 on tl-wr1041n */ - .led_ctrl2 = 0xcf35cf35, /* LED2: blink at 10/100/1000M: anyway, no LED2 on tl-wr1041n */ - .led_ctrl3 = 0x03ffff00, /* Pattern enabled for LED 0-2 of port 1-3 */ - .open_drain = true, -}; - -static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_platform_data db120_ar8327_data = { - .pad0_cfg = &db120_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &wr1041n_v2_ar8327_led_cfg, - .num_leds = ARRAY_SIZE(tl_wr1041n_leds_ar8327), - .leds = tl_wr1041n_leds_ar8327 -}; - -static struct mdio_board_info db120_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &db120_ar8327_data, - }, -}; - -static void __init tl_wr1041nv2_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(&tl_wr1041nv2_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1041nv2_leds_gpio), - tl_wr1041nv2_leds_gpio); - ath79_register_gpio_keys_polled(-1, TL_WR1041NV2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr1041nv2_gpio_keys), - tl_wr1041nv2_gpio_keys); - ath79_register_wmac(ee, mac); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | - AR934X_ETH_CFG_SW_ONLY_MODE); - - ath79_register_mdio(1, 0x0); - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - - mdiobus_register_board_info(db120_mdio0_info, - ARRAY_SIZE(db120_mdio0_info)); - - /* GMAC0 is connected to an AR8327 switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR1041N_V2, "TL-WR1041N-v2", - "TP-LINK TL-WR1041N v2", tl_wr1041nv2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c deleted file mode 100644 index 90b649957d..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c +++ /dev/null @@ -1,215 +0,0 @@ -/* - * TP-LINK TL-WR1043ND v2 board support - * - * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org> - * - * Based on the Qualcomm Atheros AP135/AP136 reference board support code - * Copyright (c) 2012 Qualcomm Atheros - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WR1043_V2_GPIO_LED_WLAN 12 -#define TL_WR1043_V2_GPIO_LED_USB 15 -#define TL_WR1043_V2_GPIO_LED_WPS 18 -#define TL_WR1043_V2_GPIO_LED_SYSTEM 19 - -#define TL_WR1043_V2_GPIO_BTN_RESET 16 -#define TL_WR1043_V2_GPIO_BTN_RFKILL 17 - -#define TL_WR1043_V2_GPIO_USB_POWER 21 - -#define TL_WR1043_V2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR1043_V2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043_V2_KEYS_POLL_INTERVAL) - -#define TL_WR1043_V2_WMAC_CALDATA_OFFSET 0x1000 - -static const char *wr1043nd_v2_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data wr1043nd_v2_flash_data = { - .part_probes = wr1043nd_v2_part_probes, -}; - -static struct gpio_led tl_wr1043_v2_leds_gpio[] __initdata = { - { - .name = "tp-link:green:wps", - .gpio = TL_WR1043_V2_GPIO_LED_WPS, - .active_low = 1, - }, - { - .name = "tp-link:green:system", - .gpio = TL_WR1043_V2_GPIO_LED_SYSTEM, - .active_low = 1, - }, - { - .name = "tp-link:green:wlan", - .gpio = TL_WR1043_V2_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "tp-link:green:usb", - .gpio = TL_WR1043_V2_GPIO_LED_USB, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr1043_v2_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR1043_V2_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR1043_V2_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "RFKILL button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = TL_WR1043_V2_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR1043_V2_GPIO_BTN_RFKILL, - .active_low = 1, - }, -}; - -static const struct ar8327_led_info tl_wr1043_leds_ar8327[] = { - AR8327_LED_INFO(PHY0_0, HW, "tp-link:green:lan4"), - AR8327_LED_INFO(PHY1_0, HW, "tp-link:green:lan3"), - AR8327_LED_INFO(PHY2_0, HW, "tp-link:green:lan2"), - AR8327_LED_INFO(PHY3_0, HW, "tp-link:green:lan1"), - AR8327_LED_INFO(PHY4_0, HW, "tp-link:green:wan"), -}; - -/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */ -static struct ar8327_pad_cfg wr1043nd_v2_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */ -static struct ar8327_pad_cfg wr1043nd_v2_ar8327_pad6_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_led_cfg wr1043nd_v2_ar8327_led_cfg = { - .led_ctrl0 = 0xcc35cc35, - .led_ctrl1 = 0xca35ca35, - .led_ctrl2 = 0xc935c935, - .led_ctrl3 = 0x03ffff00, - .open_drain = true, -}; - -static struct ar8327_platform_data wr1043nd_v2_ar8327_data = { - .pad0_cfg = &wr1043nd_v2_ar8327_pad0_cfg, - .pad6_cfg = &wr1043nd_v2_ar8327_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .port6_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &wr1043nd_v2_ar8327_led_cfg, - .num_leds = ARRAY_SIZE(tl_wr1043_leds_ar8327), - .leds = tl_wr1043_leds_ar8327, -}; - -static struct mdio_board_info wr1043nd_v2_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &wr1043nd_v2_ar8327_data, - }, -}; - -static void __init tl_wr1043nd_v2_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(&wr1043nd_v2_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043_v2_leds_gpio), - tl_wr1043_v2_leds_gpio); - ath79_register_gpio_keys_polled(-1, TL_WR1043_V2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr1043_v2_gpio_keys), - tl_wr1043_v2_gpio_keys); - - ath79_register_wmac(art + TL_WR1043_V2_WMAC_CALDATA_OFFSET, mac); - - mdiobus_register_board_info(wr1043nd_v2_mdio0_info, - ARRAY_SIZE(wr1043nd_v2_mdio0_info)); - ath79_register_mdio(0, 0x0); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - /* GMAC0 is connected to the RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x56000000; - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_register_eth(0); - - /* GMAC1 is connected to the SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_pll_data.pll_1000 = 0x03000101; - - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - ath79_register_eth(1); - - ath79_register_usb(); - - gpio_request_one(TL_WR1043_V2_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR1043ND_V2, "TL-WR1043ND-v2", - "TP-LINK TL-WR1043ND v2", tl_wr1043nd_v2_setup); - diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c deleted file mode 100644 index 04ea49c753..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c +++ /dev/null @@ -1,283 +0,0 @@ -/* - * TP-LINK WR1043 V4 support - * - * Copyright (C) 2015-2016 P. Wassi <p.wassi at gmx.at> - * Copyright (C) 2016 Matthias Schiffer <mschiffer@universe-factory.net> - * Copyright (C) 2016 Andreas Ziegler <github@andreas-ziegler.de> - * Copyright (C) 2016 Ludwig Thomeczek <ledesrc@wxorx.net> - * Copyright (C) 2017 Tim Thorpe <tim@tfthorpe.net> - * - * Derived from: mach-dir-869-a1.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - - -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/irq.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include <linux/platform_data/phy-at803x.h> -#include <linux/ar8216_platform.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "nvram.h" - -#define TL_WR1043_V4_GPIO_BTN_RESET 2 -#define TL_WR1043_V4_GPIO_BTN_RFKILL 5 - -#define TL_WR1043_V4_GPIO_LED_WLAN 19 -#define TL_WR1043_V4_GPIO_LED_USB 7 -#define TL_WR1043_V4_GPIO_LED_WPS 1 -#define TL_WR1043_V4_GPIO_LED_SYSTEM 6 - -#define TL_WR1043_V4_GPIO_USB_POWER 8 - -#define TL_WR1043_V4_GPIO_LED_INET 15 -#define TL_WR1043_V4_GPIO_LED_WAN 16 -#define TL_WR1043_V4_GPIO_LED_LAN1 9 -#define TL_WR1043_V4_GPIO_LED_LAN2 14 -#define TL_WR1043_V4_GPIO_LED_LAN3 21 -#define TL_WR1043_V4_GPIO_LED_LAN4 20 - -#define TL_WR1043_V4_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043_V4_KEYS_POLL_INTERVAL) - -#define TL_WR1043_V4_MAC_LOCATION 0x1ff50008 - -#define TL_WR1043_V4_EEPROM_ADDR 0x1fff0000 -#define TL_WR1043_V4_WMAC_CALDATA_OFFSET 0x1000 - -#define TL_WR1043_V5_MAC_LOCATION 0x1ff00008 - -static struct gpio_led tl_wr1043nd_v4_leds_gpio[] __initdata = { - { - .name = "tp-link:green:wps", - .gpio = TL_WR1043_V4_GPIO_LED_WPS, - .active_low = 1, - }, - { - .name = "tp-link:green:system", - .gpio = TL_WR1043_V4_GPIO_LED_SYSTEM, - .active_low = 1, - }, - { - .name = "tp-link:green:wlan", - .gpio = TL_WR1043_V4_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "tp-link:green:usb", - .gpio = TL_WR1043_V4_GPIO_LED_USB, - .active_low = 1, - }, - { - .name = "tp-link:green:wan", - .gpio = TL_WR1043_V4_GPIO_LED_INET, - .active_low = 1, - }, - { - .name = "tp-link:orange:wan", - .gpio = TL_WR1043_V4_GPIO_LED_WAN, - .active_low = 1, - }, - { - .name = "tp-link:green:lan1", - .gpio = TL_WR1043_V4_GPIO_LED_LAN1, - .active_low = 1, - }, - { - .name = "tp-link:green:lan2", - .gpio = TL_WR1043_V4_GPIO_LED_LAN2, - .active_low = 1, - }, - { - .name = "tp-link:green:lan3", - .gpio = TL_WR1043_V4_GPIO_LED_LAN3, - .active_low = 1, - }, - { - .name = "tp-link:green:lan4", - .gpio = TL_WR1043_V4_GPIO_LED_LAN4, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr1043nd_v4_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR1043_V4_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "RFKILL button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR1043_V4_GPIO_BTN_RFKILL, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg tl_wr1043nd_v4_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -static struct ar8327_platform_data tl_wr1043nd_v4_ar8327_data = { - .pad0_cfg = &tl_wr1043nd_v4_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info tl_wr1043nd_v4_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &tl_wr1043nd_v4_ar8327_data, - }, -}; - -static void __init tl_wr1043nd_v4_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(TL_WR1043_V4_MAC_LOCATION); - u8 *eeprom = (u8 *) KSEG1ADDR(TL_WR1043_V4_EEPROM_ADDR); - - ath79_register_m25p80(NULL); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_mask = BIT(0); - - mdiobus_register_board_info(tl_wr1043nd_v4_mdio0_info, - ARRAY_SIZE(tl_wr1043nd_v4_mdio0_info)); - - ath79_register_usb(); - ath79_register_mdio(0, 0); - ath79_register_eth(0); - - ath79_register_wmac(eeprom + TL_WR1043_V4_WMAC_CALDATA_OFFSET, mac); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_v4_leds_gpio), - tl_wr1043nd_v4_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WR1043_V4_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr1043nd_v4_gpio_keys), - tl_wr1043nd_v4_gpio_keys); - - gpio_request_one(TL_WR1043_V4_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR1043ND_V4, "TL-WR1043ND-v4", - "TP-LINK TL-WR1043ND v4", tl_wr1043nd_v4_setup); - -static struct gpio_led tl_wr1043n_v5_leds_gpio[] __initdata = { - { - .name = "tp-link:green:wps", - .gpio = TL_WR1043_V4_GPIO_LED_WPS, - .active_low = 1, - }, - { - .name = "tp-link:green:system", - .gpio = TL_WR1043_V4_GPIO_LED_SYSTEM, - .active_low = 1, - }, - { - .name = "tp-link:green:wlan", - .gpio = TL_WR1043_V4_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "tp-link:green:wan", - .gpio = TL_WR1043_V4_GPIO_LED_INET, - .active_low = 1, - }, - { - .name = "tp-link:orange:wan", - .gpio = TL_WR1043_V4_GPIO_LED_WAN, - .active_low = 1, - }, - { - .name = "tp-link:green:lan1", - .gpio = TL_WR1043_V4_GPIO_LED_LAN1, - .active_low = 1, - }, - { - .name = "tp-link:green:lan2", - .gpio = TL_WR1043_V4_GPIO_LED_LAN2, - .active_low = 1, - }, - { - .name = "tp-link:green:lan3", - .gpio = TL_WR1043_V4_GPIO_LED_LAN3, - .active_low = 1, - }, - { - .name = "tp-link:green:lan4", - .gpio = TL_WR1043_V4_GPIO_LED_LAN4, - .active_low = 1, - }, -}; - -/* The 1043Nv5 is identical to the 1043NDv4, - * only missing the usb and small firmware layout changes */ -static void __init tl_wr1043nv5_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(TL_WR1043_V4_EEPROM_ADDR); - u8 *mac = (u8 *) KSEG1ADDR(TL_WR1043_V5_MAC_LOCATION); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043n_v5_leds_gpio), - tl_wr1043n_v5_leds_gpio); - ath79_register_gpio_keys_polled(-1, TL_WR1043_V4_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr1043nd_v4_gpio_keys), - tl_wr1043nd_v4_gpio_keys); - - platform_device_register(&ath79_mdio0_device); - - mdiobus_register_board_info(tl_wr1043nd_v4_mdio0_info, - ARRAY_SIZE(tl_wr1043nd_v4_mdio0_info)); - - ath79_register_wmac(art + TL_WR1043_V4_WMAC_CALDATA_OFFSET, mac); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - - /* GMAC0 is connected to an AR8337 switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR1043N_V5, "TL-WR1043N-v5", "TP-LINK TL-WR1043N v5", - tl_wr1043nv5_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd.c deleted file mode 100644 index 4e4b85d736..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * TP-LINK TL-WR1043N/ND board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/rtl8366.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "dev-eth.h" -#include "dev-m25p80.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WR1043ND_GPIO_LED_USB 1 -#define TL_WR1043ND_GPIO_LED_SYSTEM 2 -#define TL_WR1043ND_GPIO_LED_QSS 5 -#define TL_WR1043ND_GPIO_LED_WLAN 9 - -#define TL_WR1043ND_GPIO_BTN_RESET 3 -#define TL_WR1043ND_GPIO_BTN_QSS 7 - -#define TL_WR1043ND_GPIO_RTL8366_SDA 18 -#define TL_WR1043ND_GPIO_RTL8366_SCK 19 - -#define TL_WR1043ND_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043ND_KEYS_POLL_INTERVAL) - -static const char *tl_wr1043nd_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr1043nd_flash_data = { - .part_probes = tl_wr1043nd_part_probes, -}; - -static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = { - { - .name = "tp-link:green:usb", - .gpio = TL_WR1043ND_GPIO_LED_USB, - .active_low = 1, - }, { - .name = "tp-link:green:system", - .gpio = TL_WR1043ND_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR1043ND_GPIO_LED_QSS, - .active_low = 0, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WR1043ND_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_wr1043nd_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR1043ND_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR1043ND_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static void tl_wr1043nd_rtl8366rb_hw_reset(struct rtl8366_smi *smi, bool active) -{ - if (active) - ath79_device_reset_set(AR71XX_RESET_GE0_PHY); - else - ath79_device_reset_clear(AR71XX_RESET_GE0_PHY); -} - -static struct rtl8366_platform_data tl_wr1043nd_rtl8366rb_data = { - .gpio_sda = TL_WR1043ND_GPIO_RTL8366_SDA, - .gpio_sck = TL_WR1043ND_GPIO_RTL8366_SCK, - .hw_reset = tl_wr1043nd_rtl8366rb_hw_reset, -}; - -static struct platform_device tl_wr1043nd_rtl8366rb_device = { - .name = RTL8366RB_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &tl_wr1043nd_rtl8366rb_data, - } -}; - -static void __init tl_wr1043nd_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - tl_wr1043nd_rtl8366rb_hw_reset(NULL, true); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_pll_data.pll_1000 = 0x1a000000; - - ath79_register_eth(0); - - ath79_register_usb(); - - ath79_register_m25p80(&tl_wr1043nd_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio), - tl_wr1043nd_leds_gpio); - - platform_device_register(&tl_wr1043nd_rtl8366rb_device); - - ath79_register_gpio_keys_polled(-1, TL_WR1043ND_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr1043nd_gpio_keys), - tl_wr1043nd_gpio_keys); - - ath79_register_wmac(eeprom, mac); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR1043ND, "TL-WR1043ND", "TP-LINK TL-WR1043ND", - tl_wr1043nd_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c deleted file mode 100644 index 141914aa29..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * TP-LINK TL-WR2543N/ND board support - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/rtl8367.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define TL_WR2543N_GPIO_LED_WPS 0 -#define TL_WR2543N_GPIO_LED_USB 8 - -/* The WLAN LEDs use GPIOs on the discrete AR9380 wmac */ -#define TL_WR2543N_GPIO_WMAC_LED_WLAN2G 0 -#define TL_WR2543N_GPIO_WMAC_LED_WLAN5G 1 - -#define TL_WR2543N_GPIO_BTN_RESET 11 -#define TL_WR2543N_GPIO_BTN_WPS 12 - -#define TL_WR2543N_GPIO_RTL8367_SDA 1 -#define TL_WR2543N_GPIO_RTL8367_SCK 6 - -#define TL_WR2543N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR2543N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR2543N_KEYS_POLL_INTERVAL) - -static const char *tl_wr2543n_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr2543n_flash_data = { - .part_probes = tl_wr2543n_part_probes, -}; - -static struct gpio_led tl_wr2543n_leds_gpio[] __initdata = { - { - .name = "tp-link:green:usb", - .gpio = TL_WR2543N_GPIO_LED_USB, - .active_low = 1, - }, { - .name = "tp-link:green:wps", - .gpio = TL_WR2543N_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_led tl_wr2543n_wmac_leds_gpio[] = { - { - .name = "tp-link:green:wlan2g", - .gpio = TL_WR2543N_GPIO_WMAC_LED_WLAN2G, - .active_low = 1, - }, - { - .name = "tp-link:green:wlan5g", - .gpio = TL_WR2543N_GPIO_WMAC_LED_WLAN5G, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr2543n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR2543N_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR2543N_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static struct rtl8367_extif_config tl_wr2543n_rtl8367_extif0_cfg = { - .mode = RTL8367_EXTIF_MODE_RGMII, - .txdelay = 1, - .rxdelay = 0, - .ability = { - .force_mode = 1, - .txpause = 1, - .rxpause = 1, - .link = 1, - .duplex = 1, - .speed = RTL8367_PORT_SPEED_1000, - }, -}; - -static struct rtl8367_platform_data tl_wr2543n_rtl8367_data = { - .gpio_sda = TL_WR2543N_GPIO_RTL8367_SDA, - .gpio_sck = TL_WR2543N_GPIO_RTL8367_SCK, - .extif0_cfg = &tl_wr2543n_rtl8367_extif0_cfg, -}; - -static struct platform_device tl_wr2543n_rtl8367_device = { - .name = RTL8367_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &tl_wr2543n_rtl8367_data, - } -}; - -static void __init tl_wr2543n_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(&tl_wr2543n_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr2543n_leds_gpio), - tl_wr2543n_leds_gpio); - ath79_register_gpio_keys_polled(-1, TL_WR2543N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr2543n_gpio_keys), - tl_wr2543n_gpio_keys); - ath79_register_usb(); - - ap9x_pci_setup_wmac_leds(0, tl_wr2543n_wmac_leds_gpio, - ARRAY_SIZE(tl_wr2543n_wmac_leds_gpio)); - ap91_pci_init(eeprom, mac); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1); - ath79_eth0_data.mii_bus_dev = &tl_wr2543n_rtl8367_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_pll_data.pll_1000 = 0x1a000000; - - ath79_register_eth(0); - - platform_device_register(&tl_wr2543n_rtl8367_device); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR2543N, "TL-WR2543N", "TP-LINK TL-WR2543N/ND", - tl_wr2543n_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr703n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr703n.c deleted file mode 100644 index 1d8d01cc63..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr703n.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * TP-LINK TL-WR703N/TL-MR10U board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WR703N_GPIO_LED_SYSTEM 27 -#define TL_WR703N_GPIO_BTN_RESET 11 - -#define TL_WR703N_GPIO_USB_POWER 8 - -#define TL_MR10U_GPIO_USB_POWER 18 - -#define TL_WR703N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR703N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR703N_KEYS_POLL_INTERVAL) - -static const char *tl_wr703n_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr703n_flash_data = { - .part_probes = tl_wr703n_part_probes, -}; - -static struct gpio_led tl_wr703n_leds_gpio[] __initdata = { - { - .name = "tp-link:blue:system", - .gpio = TL_WR703N_GPIO_LED_SYSTEM, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr703n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR703N_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR703N_GPIO_BTN_RESET, - .active_low = 0, - } -}; - -static void __init common_setup(unsigned usb_power_gpio, bool sec_ethernet) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_m25p80(&tl_wr703n_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr703n_leds_gpio), - tl_wr703n_leds_gpio); - ath79_register_gpio_keys_polled(-1, TL_WR703N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr703n_gpio_keys), - tl_wr703n_gpio_keys); - - gpio_request_one(usb_power_gpio, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - - if (sec_ethernet) - { - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); - ath79_register_eth(1); - } - - ath79_register_wmac(ee, mac); -} - -static void __init tl_mr10u_setup(void) -{ - common_setup(TL_MR10U_GPIO_USB_POWER, false); -} - -MIPS_MACHINE(ATH79_MACH_TL_MR10U, "TL-MR10U", "TP-LINK TL-MR10U", - tl_mr10u_setup); - -static void __init tl_wr703n_setup(void) -{ - common_setup(TL_WR703N_GPIO_USB_POWER, false); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR703N, "TL-WR703N", "TP-LINK TL-WR703N v1", - tl_wr703n_setup); - -static void __init tl_wr710n_setup(void) -{ - common_setup(TL_WR703N_GPIO_USB_POWER, true); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR710N, "TL-WR710N", "TP-LINK TL-WR710N v1", - tl_wr710n_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr720n-v3.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr720n-v3.c deleted file mode 100644 index 2bb3b44a71..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr720n-v3.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * TP-LINK TL-WR720N board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2013 yousong <yszhou4tech@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WR720N_GPIO_LED_SYSTEM 27 -#define TL_WR720N_GPIO_BTN_RESET 11 -#define TL_WR720N_GPIO_BTN_SW1 18 -#define TL_WR720N_GPIO_BTN_SW2 20 - -#define TL_WR720N_GPIO_USB_POWER 8 - -#define TL_WR720N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR720N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR720N_KEYS_POLL_INTERVAL) - -static const char *tl_wr720n_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr720n_flash_data = { - .part_probes = tl_wr720n_part_probes, -}; - -static struct gpio_led tl_wr720n_leds_gpio[] __initdata = { - { - .name = "tp-link:blue:system", - .gpio = TL_WR720N_GPIO_LED_SYSTEM, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr720n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR720N_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR720N_GPIO_BTN_RESET, - .active_low = 0, - }, { - .desc = "sw1", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = TL_WR720N_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR720N_GPIO_BTN_SW1, - .active_low = 0, - }, { - .desc = "sw2", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = TL_WR720N_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR720N_GPIO_BTN_SW2, - .active_low = 0, - } -}; - -static void __init tl_wr720n_v3_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_m25p80(&tl_wr720n_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr720n_leds_gpio), - tl_wr720n_leds_gpio); - ath79_register_gpio_keys_polled(-1, TL_WR720N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr720n_gpio_keys), - tl_wr720n_gpio_keys); - - gpio_request_one(TL_WR720N_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR720N_V3, "TL-WR720N-v3", "TP-LINK TL-WR720N v3/v4", - tl_wr720n_v3_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c deleted file mode 100644 index 851b7624ff..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * TP-LINK TL-WR741ND v4/TL-MR3220 v2 board support - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WR741NDV4_GPIO_BTN_RESET 11 -#define TL_WR741NDV4_GPIO_BTN_WPS 26 - -#define TL_WR741NDV4_GPIO_LED_WLAN 0 -#define TL_WR741NDV4_GPIO_LED_QSS 1 -#define TL_WR741NDV4_GPIO_LED_WAN 13 -#define TL_WR741NDV4_GPIO_LED_LAN1 14 -#define TL_WR741NDV4_GPIO_LED_LAN2 15 -#define TL_WR741NDV4_GPIO_LED_LAN3 16 -#define TL_WR741NDV4_GPIO_LED_LAN4 17 -#define TL_WR741NDV4_GPIO_LED_SYSTEM 27 - -#define TL_MR3220V2_GPIO_BTN_WPS 11 -#define TL_MR3220V2_GPIO_BTN_WIFI 24 - -#define TL_MR3220V2_GPIO_LED_3G 26 -#define TL_MR3220V2_GPIO_USB_POWER 8 - -#define TL_WR741NDV4_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741NDV4_KEYS_POLL_INTERVAL) - -static const char *tl_wr741ndv4_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr741ndv4_flash_data = { - .part_probes = tl_wr741ndv4_part_probes, -}; - -static struct gpio_led tl_wr741ndv4_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan1", - .gpio = TL_WR741NDV4_GPIO_LED_LAN1, - .active_low = 0, - }, { - .name = "tp-link:green:lan2", - .gpio = TL_WR741NDV4_GPIO_LED_LAN2, - .active_low = 0, - }, { - .name = "tp-link:green:lan3", - .gpio = TL_WR741NDV4_GPIO_LED_LAN3, - .active_low = 0, - }, { - .name = "tp-link:green:lan4", - .gpio = TL_WR741NDV4_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR741NDV4_GPIO_LED_QSS, - .active_low = 0, - }, { - .name = "tp-link:green:system", - .gpio = TL_WR741NDV4_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:wan", - .gpio = TL_WR741NDV4_GPIO_LED_WAN, - .active_low = 0, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WR741NDV4_GPIO_LED_WLAN, - .active_low = 0, - }, { - /* the 3G LED is only present on the MR3220 v2 */ - .name = "tp-link:green:3g", - .gpio = TL_MR3220V2_GPIO_LED_3G, - .active_low = 0, - }, -}; - -static struct gpio_keys_button tl_wr741ndv4_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR741NDV4_GPIO_BTN_RESET, - .active_low = 0, - }, { - .desc = "WPS", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR741NDV4_GPIO_BTN_WPS, - .active_low = 0, - } -}; - -static struct gpio_keys_button tl_mr3220v2_gpio_keys[] __initdata = { - { - .desc = "WPS", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR3220V2_GPIO_BTN_WPS, - .active_low = 0, - }, { - .desc = "WIFI button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_MR3220V2_GPIO_BTN_WIFI, - .active_low = 0, - } -}; - -static void __init tl_ap121_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_setup_ar933x_phy4_switch(true, true); - - ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_register_m25p80(&tl_wr741ndv4_flash_data); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(1); - ath79_register_eth(0); - - ath79_register_wmac(ee, mac); -} - -static void __init tl_wr741ndv4_setup(void) -{ - tl_ap121_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741ndv4_leds_gpio) - 1, - tl_wr741ndv4_leds_gpio); - ath79_register_gpio_keys_polled(1, TL_WR741NDV4_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr741ndv4_gpio_keys), - tl_wr741ndv4_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR741ND_V4, "TL-WR741ND-v4", - "TP-LINK TL-WR741ND v4", tl_wr741ndv4_setup); - -static void __init tl_mr3220v2_setup(void) -{ - tl_ap121_setup(); - - gpio_request_one(TL_MR3220V2_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741ndv4_leds_gpio), - tl_wr741ndv4_leds_gpio); - ath79_register_gpio_keys_polled(1, TL_WR741NDV4_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_mr3220v2_gpio_keys), - tl_mr3220v2_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_MR3220_V2, "TL-MR3220-v2", - "TP-LINK TL-MR3220 v2", tl_mr3220v2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd.c deleted file mode 100644 index 5931654bbd..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * TP-LINK TL-WR741ND board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -#define TL_WR741ND_GPIO_LED_QSS 0 -#define TL_WR741ND_GPIO_LED_SYSTEM 1 -#define TL_WR741ND_GPIO_LED_LAN1 13 -#define TL_WR741ND_GPIO_LED_LAN2 14 -#define TL_WR741ND_GPIO_LED_LAN3 15 -#define TL_WR741ND_GPIO_LED_LAN4 16 -#define TL_WR741ND_GPIO_LED_WAN 17 - -#define TL_WR741ND_GPIO_BTN_RESET 11 -#define TL_WR741ND_GPIO_BTN_QSS 12 - -#define TL_WR741ND_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR741ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741ND_KEYS_POLL_INTERVAL) - -static const char *tl_wr741nd_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr741nd_flash_data = { - .part_probes = tl_wr741nd_part_probes, -}; - -static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan1", - .gpio = TL_WR741ND_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "tp-link:green:lan2", - .gpio = TL_WR741ND_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "tp-link:green:lan3", - .gpio = TL_WR741ND_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "tp-link:green:lan4", - .gpio = TL_WR741ND_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR741ND_GPIO_LED_QSS, - .active_low = 1, - }, { - .name = "tp-link:green:system", - .gpio = TL_WR741ND_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:wan", - .gpio = TL_WR741ND_GPIO_LED_WAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr741nd_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR741ND_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR741ND_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static void __init tl_wr741nd_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(&tl_wr741nd_flash_data); - - ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio), - tl_wr741nd_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WR741ND_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr741nd_gpio_keys), - tl_wr741nd_gpio_keys); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); - - ath79_register_mdio(0, 0x0); - - /* LAN ports */ - ath79_register_eth(1); - - /* WAN port */ - ath79_register_eth(0); - - ap9x_pci_setup_wmac_led_pin(0, 1); - ap91_pci_init(ee, mac); -} -MIPS_MACHINE(ATH79_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND", - tl_wr741nd_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr802n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr802n.c deleted file mode 100644 index 514529ca18..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr802n.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * TP-LINK TL-WR802N v1, v2 - * - * Copyright (C) 2015 Rick Pannen <pannen@gmail.com <mailto:pannen@gmail.com>> - * Copyright (C) 2016 Thomas Roberts <tom.p.roberts@gmail.com <mailto:tom.p.roberts@gmail.com>> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WR802N_GPIO_LED_SYSTEM 13 -#define TL_WR802N_GPIO_BTN_RESET 12 - -#define TL_WR802N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR802N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR802N_KEYS_POLL_INTERVAL) - -static const char *tl_wr802n_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr802n_flash_data = { - .part_probes = tl_wr802n_part_probes, -}; - -static struct gpio_led tl_wr802n_v1_leds_gpio[] __initdata = { - { - .name = "tp-link:blue:system", - .gpio = TL_WR802N_GPIO_LED_SYSTEM, - .active_low = 1, - }, -}; - -static struct gpio_led tl_wr802n_v2_leds_gpio[] __initdata = { - { - .name = "tl-wr802n-v2:green:system", - .gpio = TL_WR802N_GPIO_LED_SYSTEM, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr802n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR802N_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR802N_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init tl_ap143_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - u8 tmpmac[ETH_ALEN]; - - ath79_register_m25p80(&tl_wr802n_flash_data); - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_mdio(0, 0x0); - - /* LAN */ - ath79_switch_data.phy4_mii_en = 1; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.phy_mask = BIT(4); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_register_eth(0); - - ath79_init_mac(tmpmac, mac, 0); - ath79_register_wmac(ee, tmpmac); - - ath79_register_gpio_keys_polled(1, TL_WR802N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr802n_gpio_keys), - tl_wr802n_gpio_keys); -} - -static void __init tl_wr802n_v1_setup(void) -{ - tl_ap143_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr802n_v1_leds_gpio), - tl_wr802n_v1_leds_gpio); -} - -static void __init tl_wr802n_v2_setup(void) -{ - tl_ap143_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr802n_v2_leds_gpio), - tl_wr802n_v2_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR802N_V1, "TL-WR802N-v1", "TP-LINK TL-WR802N v1", - tl_wr802n_v1_setup); - -MIPS_MACHINE(ATH79_MACH_TL_WR802N_V2, "TL-WR802N-v2", "TP-LINK TL-WR802N v2", - tl_wr802n_v2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr810n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr810n.c deleted file mode 100644 index 588bb9d861..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr810n.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * TP-LINK TL-WR810N board support - * - * Copyright (c) 2012 Qualcomm Atheros - * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2016 Jens Steinhauser <jens.steinhauser@gmail.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WR810N_GPIO_SWITCH_B1 0 -#define TL_WR810N_GPIO_SWITCH_B0 1 -#define TL_WR810N_GPIO_USB_POWER 11 -#define TL_WR810N_GPIO_BTN_RESET 12 -#define TL_WR810N_GPIO_LED_SYSTEM 13 - -#define TL_WR810N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR810N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR810N_KEYS_POLL_INTERVAL) - -#define TL_WR810N_WMAC_CALDATA_OFFSET 0x1000 - -static const char *tl_wr810n_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr810n_flash_data = { - .part_probes = tl_wr810n_part_probes, -}; - -static struct gpio_led tl_wr810n_leds_gpio[] __initdata = { - { - .name = "tp-link:blue:system", - .gpio = TL_WR810N_GPIO_LED_SYSTEM, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr810n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR810N_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR810N_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "switch_b0", - .type = EV_SW, - .code = BTN_0, - .debounce_interval = TL_WR810N_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR810N_GPIO_SWITCH_B0, - .active_low = 0, - }, - { - .desc = "switch_b1", - .type = EV_SW, - .code = BTN_1, - .debounce_interval = TL_WR810N_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR810N_GPIO_SWITCH_B1, - .active_low = 0, - }, -}; - -static void __init tl_ap143_setup(int lan_mac_offset) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(&tl_wr810n_flash_data); - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_mdio(0, 0x0); - - /* WAN */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.phy_mask = BIT(4); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_register_eth(0); - - /* LAN */ - ath79_switch_data.phy4_mii_en = 1; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.speed = SPEED_1000; - ath79_switch_data.phy_poll_mask |= BIT(4); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, lan_mac_offset); - ath79_register_eth(1); - - ath79_register_wmac(art + TL_WR810N_WMAC_CALDATA_OFFSET, mac); - - ath79_register_leds_gpio(-1, - ARRAY_SIZE(tl_wr810n_leds_gpio), - tl_wr810n_leds_gpio); - ath79_register_gpio_keys_polled(-1, - TL_WR810N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr810n_gpio_keys), - tl_wr810n_gpio_keys); -} - -static void __init tl_wr810n_setup(void) -{ - tl_ap143_setup(-1); - - gpio_request_one(TL_WR810N_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); -} - -static void __init tl_wr810n_v2_setup(void) -{ - tl_ap143_setup(0); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR810N, "TL-WR810N", "TP-LINK TL-WR810N", - tl_wr810n_setup); - -MIPS_MACHINE(ATH79_MACH_TL_WR810N_V2, "TL-WR810N-v2", "TP-LINK TL-WR810N v2", - tl_wr810n_v2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c deleted file mode 100644 index 73cfdd9cc6..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c +++ /dev/null @@ -1,286 +0,0 @@ -/* - * TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WR841NV8_GPIO_LED_WLAN 13 -#define TL_WR841NV8_GPIO_LED_QSS 15 -#define TL_WR841NV8_GPIO_LED_WAN 18 -#define TL_WR841NV8_GPIO_LED_LAN1 19 -#define TL_WR841NV8_GPIO_LED_LAN2 20 -#define TL_WR841NV8_GPIO_LED_LAN3 21 -#define TL_WR841NV8_GPIO_LED_LAN4 12 -#define TL_WR841NV8_GPIO_LED_SYSTEM 14 - -#define TL_WR841NV8_GPIO_BTN_RESET 17 -#define TL_WR841NV8_GPIO_SW_RFKILL 16 /* WPS for MR3420 v2 */ - -#define TL_MR3420V2_GPIO_LED_3G 11 -#define TL_MR3420V2_GPIO_USB_POWER 4 - -#define TL_WR941NDV5_GPIO_LED_WLAN 13 -#define TL_WR941NDV5_GPIO_LED_QSS 15 -#define TL_WR941NDV5_GPIO_LED_WAN 18 -#define TL_WR941NDV5_GPIO_LED_LAN1 19 -#define TL_WR941NDV5_GPIO_LED_LAN2 20 -#define TL_WR941NDV5_GPIO_LED_LAN3 2 -#define TL_WR941NDV5_GPIO_LED_LAN4 3 -#define TL_WR941NDV5_GPIO_LED_SYSTEM 14 - -#define TL_WR841NV8_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR841NV8_KEYS_POLL_INTERVAL) - -static const char *tl_wr841n_v8_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr841n_v8_flash_data = { - .part_probes = tl_wr841n_v8_part_probes, -}; - -static struct gpio_led tl_wr841n_v8_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan1", - .gpio = TL_WR841NV8_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "tp-link:green:lan2", - .gpio = TL_WR841NV8_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "tp-link:green:lan3", - .gpio = TL_WR841NV8_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "tp-link:green:lan4", - .gpio = TL_WR841NV8_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR841NV8_GPIO_LED_QSS, - .active_low = 1, - }, { - .name = "tp-link:green:system", - .gpio = TL_WR841NV8_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:wan", - .gpio = TL_WR841NV8_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WR841NV8_GPIO_LED_WLAN, - .active_low = 1, - }, { - /* the 3G LED is only present on the MR3420 v2 */ - .name = "tp-link:green:3g", - .gpio = TL_MR3420V2_GPIO_LED_3G, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr841n_v8_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR841NV8_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "RFKILL switch", - .type = EV_SW, - .code = KEY_RFKILL, - .debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR841NV8_GPIO_SW_RFKILL, - .active_low = 0, - } -}; - -static struct gpio_keys_button tl_mr3420v2_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR841NV8_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "WPS", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR841NV8_GPIO_SW_RFKILL, - .active_low = 0, - } -}; - -static struct gpio_led tl_wr941nd_v5_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan1", - .gpio = TL_WR941NDV5_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "tp-link:green:lan2", - .gpio = TL_WR941NDV5_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "tp-link:green:lan3", - .gpio = TL_WR941NDV5_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "tp-link:green:lan4", - .gpio = TL_WR941NDV5_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR941NDV5_GPIO_LED_QSS, - .active_low = 1, - }, { - .name = "tp-link:green:system", - .gpio = TL_WR941NDV5_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:wan", - .gpio = TL_WR941NDV5_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WR941NDV5_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static void __init tl_ap123_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - /* Disable JTAG, enabling GPIOs 0-3 */ - /* Configure OBS4 line, for GPIO 4*/ - ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE, - AR934X_GPIO_FUNC_CLK_OBS4_EN); - - /* config gpio4 as normal gpio function */ - ath79_gpio_output_select(TL_MR3420V2_GPIO_USB_POWER, - AR934X_GPIO_OUT_GPIO); - - ath79_register_m25p80(&tl_wr841n_v8_flash_data); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP); - - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - - /* GMAC0 is connected to the PHY0 of the internal switch */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_register_eth(0); - - /* GMAC1 is connected to the internal switch */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_register_eth(1); - - ath79_register_wmac(ee, mac); -} - -static void __init tl_wr841n_v8_setup(void) -{ - tl_ap123_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v8_leds_gpio) - 1, - tl_wr841n_v8_leds_gpio); - - ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr841n_v8_gpio_keys), - tl_wr841n_v8_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR841N_V8, "TL-WR841N-v8", "TP-LINK TL-WR841N/ND v8", - tl_wr841n_v8_setup); - - -static void __init tl_wr842n_v2_setup(void) -{ - tl_ap123_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v8_leds_gpio), - tl_wr841n_v8_leds_gpio); - - ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr841n_v8_gpio_keys), - tl_wr841n_v8_gpio_keys); - - gpio_request_one(TL_MR3420V2_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR842N_V2, "TL-WR842N-v2", "TP-LINK TL-WR842N/ND v2", - tl_wr842n_v2_setup); - -static void __init tl_mr3420v2_setup(void) -{ - tl_ap123_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v8_leds_gpio), - tl_wr841n_v8_leds_gpio); - - ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_mr3420v2_gpio_keys), - tl_mr3420v2_gpio_keys); - - /* enable power for the USB port */ - gpio_request_one(TL_MR3420V2_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_TL_MR3420_V2, "TL-MR3420-v2", "TP-LINK TL-MR3420 v2", - tl_mr3420v2_setup); - - -static void __init tl_wr941nd_v5_setup(void) -{ - tl_ap123_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_v5_leds_gpio), - tl_wr941nd_v5_leds_gpio); - - ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr841n_v8_gpio_keys), - tl_wr841n_v8_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR941ND_V5, "TL-WR941ND-v5", "TP-LINK TL-WR941N/ND v5", - tl_wr941nd_v5_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c deleted file mode 100644 index 304d8ff6e9..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c +++ /dev/null @@ -1,457 +0,0 @@ -/* - * TP-LINK TL-WR840N v2/v3 / TL-WR841N/ND v9/v11 / TL-WR842N/ND v3 - * - * Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net> - * Copyright (C) 2016 Cezary Jackiewicz <cezary@eko.one.pl> - * Copyright (C) 2016 Stijn Segers <francesco.borromini@gmail.com> - * Copyright (C) 2017 Vaclav Svoboda <svoboda@neng.cz> - * Copyright (C) 2017 Andrey Polischuk <androld.b@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WR840NV2_GPIO_LED_SYSTEM 15 -#define TL_WR840NV2_GPIO_LED_WLAN 13 -#define TL_WR840NV2_GPIO_LED_WPS 3 -#define TL_WR840NV2_GPIO_LED_WAN 4 -#define TL_WR840NV2_GPIO_LED_LAN 16 - -#define TL_WR840NV2_GPIO_BTN_RESET 12 - -#define TL_WR841NV9_GPIO_LED_WLAN 13 -#define TL_WR841NV9_GPIO_LED_QSS 3 -#define TL_WR841NV9_GPIO_LED_WAN 4 -#define TL_WR841NV9_GPIO_LED_LAN1 16 -#define TL_WR841NV9_GPIO_LED_LAN2 15 -#define TL_WR841NV9_GPIO_LED_LAN3 14 -#define TL_WR841NV9_GPIO_LED_LAN4 11 - -#define TL_WR841NV9_GPIO_BTN_RESET 12 -#define TL_WR841NV9_GPIO_BTN_WIFI 17 - -#define TL_WR841NV11_GPIO_LED_SYSTEM 1 -#define TL_WR841NV11_GPIO_LED_QSS 3 -#define TL_WR841NV11_GPIO_LED_WAN 4 -#define TL_WR841NV11_GPIO_LED_WAN_STATUS 2 -#define TL_WR841NV11_GPIO_LED_WLAN 13 -#define TL_WR841NV11_GPIO_LED_LAN1 16 -#define TL_WR841NV11_GPIO_LED_LAN2 15 -#define TL_WR841NV11_GPIO_LED_LAN3 14 -#define TL_WR841NV11_GPIO_LED_LAN4 11 - -#define TL_WR841NV11_GPIO_BTN_RESET 12 -#define TL_WR841NV11_GPIO_BTN_WIFI 17 - -#define TL_WR842NV3_GPIO_LED_SYSTEM 2 -#define TL_WR842NV3_GPIO_LED_WLAN 3 -#define TL_WR842NV3_GPIO_LED_WAN_RED 4 -#define TL_WR842NV3_GPIO_LED_WAN_GREEN 11 -#define TL_WR842NV3_GPIO_LED_LAN1 12 -#define TL_WR842NV3_GPIO_LED_LAN2 13 -#define TL_WR842NV3_GPIO_LED_LAN3 14 -#define TL_WR842NV3_GPIO_LED_LAN4 15 -#define TL_WR842NV3_GPIO_LED_3G 16 -#define TL_WR842NV3_GPIO_LED_WPS 17 - -#define TL_WR842NV3_GPIO_BTN_RESET 1 -#define TL_WR842NV3_GPIO_BTN_WIFI 0 - -#define TL_WR740NV6_GPIO_LED_SYSTEM 1 -#define TL_WR740NV6_GPIO_LED_QSS 3 -#define TL_WR740NV6_GPIO_LED_WAN_ORANGE 2 -#define TL_WR740NV6_GPIO_LED_WAN_GREEN 4 -#define TL_WR740NV6_GPIO_LED_LAN1 16 -#define TL_WR740NV6_GPIO_LED_LAN2 15 -#define TL_WR740NV6_GPIO_LED_LAN3 14 -#define TL_WR740NV6_GPIO_LED_LAN4 11 -#define TL_WR740NV6_GPIO_LED_WLAN 13 - -#define TL_WR740NV6_GPIO_BTN_RESET 12 -#define TL_WR740NV6_GPIO_BTN_WIFI 17 - -#define TL_WR841NV9_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR841NV9_KEYS_POLL_INTERVAL) - -static const char *tl_wr841n_v9_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr841n_v9_flash_data = { - .part_probes = tl_wr841n_v9_part_probes, -}; - -static struct gpio_led tl_wr840n_v2_leds_gpio[] __initdata = { - { - .name = "tp-link:green:system", - .gpio = TL_WR840NV2_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:lan", - .gpio = TL_WR840NV2_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "tp-link:green:wps", - .gpio = TL_WR840NV2_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "tp-link:green:wan", - .gpio = TL_WR840NV2_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WR840NV2_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr840n_v2_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR840NV2_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct gpio_led tl_wr841n_v9_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan1", - .gpio = TL_WR841NV9_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "tp-link:green:lan2", - .gpio = TL_WR841NV9_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "tp-link:green:lan3", - .gpio = TL_WR841NV9_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "tp-link:green:lan4", - .gpio = TL_WR841NV9_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR841NV9_GPIO_LED_QSS, - .active_low = 1, - }, { - .name = "tp-link:green:wan", - .gpio = TL_WR841NV9_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WR841NV9_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr841n_v9_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR841NV9_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "WIFI button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR841NV9_GPIO_BTN_WIFI, - .active_low = 1, - } -}; - -static struct gpio_led tl_wr841n_v11_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan1", - .gpio = TL_WR841NV9_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "tp-link:green:lan2", - .gpio = TL_WR841NV9_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "tp-link:green:lan3", - .gpio = TL_WR841NV9_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "tp-link:green:lan4", - .gpio = TL_WR841NV9_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR841NV9_GPIO_LED_QSS, - .active_low = 1, - }, { - .name = "tp-link:green:system", - .gpio = TL_WR841NV11_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:wan", - .gpio = TL_WR841NV9_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "tp-link:green:wan_status", - .gpio = TL_WR841NV11_GPIO_LED_WAN_STATUS, - .active_low = 1, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WR841NV9_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static struct gpio_led tl_wr842n_v3_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan1", - .gpio = TL_WR842NV3_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "tp-link:green:lan2", - .gpio = TL_WR842NV3_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "tp-link:green:lan3", - .gpio = TL_WR842NV3_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "tp-link:green:lan4", - .gpio = TL_WR842NV3_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "tp-link:green:wan", - .gpio = TL_WR842NV3_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, { - .name = "tp-link:red:wan", - .gpio = TL_WR842NV3_GPIO_LED_WAN_RED, - .active_low = 1, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WR842NV3_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "tp-link:green:system", - .gpio = TL_WR842NV3_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:3g", - .gpio = TL_WR842NV3_GPIO_LED_3G, - .active_low = 1, - }, { - .name = "tp-link:green:wps", - .gpio = TL_WR842NV3_GPIO_LED_WPS, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr842n_v3_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR842NV3_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "WIFI button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR842NV3_GPIO_BTN_WIFI, - .active_low = 1, - } -}; - -static struct gpio_led tl_wr740n_v6_leds_gpio[] __initdata = { - { - .name = "tp-link:green:lan1", - .gpio = TL_WR740NV6_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "tp-link:green:lan2", - .gpio = TL_WR740NV6_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "tp-link:green:lan3", - .gpio = TL_WR740NV6_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "tp-link:green:lan4", - .gpio = TL_WR740NV6_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "tp-link:green:system", - .gpio = TL_WR740NV6_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR740NV6_GPIO_LED_QSS, - .active_low = 1, - }, { - .name = "tp-link:green:wan", - .gpio = TL_WR740NV6_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, { - .name = "tp-link:orange:wan", - .gpio = TL_WR740NV6_GPIO_LED_WAN_ORANGE, - .active_low = 1, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WR740NV6_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr740n_v6_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR740NV6_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "WIFI button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR740NV6_GPIO_BTN_WIFI, - .active_low = 1, - } -}; - -static void __init tl_ap143_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - u8 tmpmac[ETH_ALEN]; - - ath79_register_m25p80(&tl_wr841n_v9_flash_data); - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_mdio(0, 0x0); - - /* LAN */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_switch_data.phy_poll_mask |= BIT(4); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - ath79_register_eth(1); - - /* WAN */ - ath79_switch_data.phy4_mii_en = 1; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.phy_mask = BIT(4); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_register_eth(0); - - ath79_init_mac(tmpmac, mac, 0); - ath79_register_wmac(ee, tmpmac); -} - - -static void __init tl_wr840n_v2_setup(void) -{ - tl_ap143_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr840n_v2_leds_gpio), - tl_wr840n_v2_leds_gpio); - - ath79_register_gpio_keys_polled(1, TL_WR841NV9_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr840n_v2_gpio_keys), - tl_wr840n_v2_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR840N_V2, "TL-WR840N-v2", "TP-LINK TL-WR840N v2", - tl_wr840n_v2_setup); - -MIPS_MACHINE(ATH79_MACH_TL_WR840N_V3, "TL-WR840N-v3", "TP-LINK TL-WR840N v3", - tl_wr840n_v2_setup); - -static void __init tl_wr841n_v9_setup(void) -{ - tl_ap143_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v9_leds_gpio), - tl_wr841n_v9_leds_gpio); - - ath79_register_gpio_keys_polled(1, TL_WR841NV9_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr841n_v9_gpio_keys), - tl_wr841n_v9_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR841N_V9, "TL-WR841N-v9", "TP-LINK TL-WR841N/ND v9", - tl_wr841n_v9_setup); - -static void __init tl_wr841n_v11_setup(void) -{ - tl_ap143_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v11_leds_gpio), - tl_wr841n_v11_leds_gpio); - - ath79_register_gpio_keys_polled(1, TL_WR841NV9_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr841n_v9_gpio_keys), - tl_wr841n_v9_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR841N_V11, "TL-WR841N-v11", "TP-LINK TL-WR841N/ND v11", - tl_wr841n_v11_setup); - -static void __init tl_wr842n_v3_setup(void) -{ - tl_ap143_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr842n_v3_leds_gpio), - tl_wr842n_v3_leds_gpio); - - ath79_register_gpio_keys_polled(1, TL_WR841NV9_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr842n_v3_gpio_keys), - tl_wr842n_v3_gpio_keys); - - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR842N_V3, "TL-WR842N-v3", "TP-LINK TL-WR842N/ND v3", - tl_wr842n_v3_setup); - -static void __init tl_wr740n_v6_setup(void) -{ - tl_ap143_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr740n_v6_leds_gpio), - tl_wr740n_v6_leds_gpio); - - ath79_register_gpio_keys_polled(1, TL_WR841NV9_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr740n_v6_gpio_keys), - tl_wr740n_v6_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR740N_V6, "TL-WR740N-v6", "TP-LINK TL-WR740N/ND v6", - tl_wr740n_v6_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n.c deleted file mode 100644 index 11f853f057..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * TP-LINK TL-WR841N/ND v1 board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-dsa.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" -#include "pci.h" - -#define TL_WR841ND_V1_GPIO_LED_SYSTEM 2 -#define TL_WR841ND_V1_GPIO_LED_QSS_GREEN 4 -#define TL_WR841ND_V1_GPIO_LED_QSS_RED 5 - -#define TL_WR841ND_V1_GPIO_BTN_RESET 3 -#define TL_WR841ND_V1_GPIO_BTN_QSS 7 - -#define TL_WR841ND_V1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL \ - (3 * TL_WR841ND_V1_KEYS_POLL_INTERVAL) - -static struct mtd_partition tl_wr841n_v1_partitions[] = { - { - .name = "redboot", - .offset = 0, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "kernel", - .offset = 0x020000, - .size = 0x140000, - }, { - .name = "rootfs", - .offset = 0x160000, - .size = 0x280000, - }, { - .name = "config", - .offset = 0x3e0000, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x020000, - .size = 0x3c0000, - } -}; - -static struct flash_platform_data tl_wr841n_v1_flash_data = { - .parts = tl_wr841n_v1_partitions, - .nr_parts = ARRAY_SIZE(tl_wr841n_v1_partitions), -}; - -static struct gpio_led tl_wr841n_v1_leds_gpio[] __initdata = { - { - .name = "tp-link:green:system", - .gpio = TL_WR841ND_V1_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:red:qss", - .gpio = TL_WR841ND_V1_GPIO_LED_QSS_RED, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR841ND_V1_GPIO_LED_QSS_GREEN, - } -}; - -static struct gpio_keys_button tl_wr841n_v1_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR841ND_V1_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR841ND_V1_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static struct dsa_chip_data tl_wr841n_v1_dsa_chip = { - .port_names[0] = "wan", - .port_names[1] = "lan1", - .port_names[2] = "lan2", - .port_names[3] = "lan3", - .port_names[4] = "lan4", - .port_names[5] = "cpu", -}; - -static struct dsa_platform_data tl_wr841n_v1_dsa_data = { - .nr_chips = 1, - .chip = &tl_wr841n_v1_dsa_chip, -}; - -static void __init tl_wr841n_v1_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev, - &tl_wr841n_v1_dsa_data); - - ath79_register_m25p80(&tl_wr841n_v1_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v1_leds_gpio), - tl_wr841n_v1_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WR841ND_V1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr841n_v1_gpio_keys), - tl_wr841n_v1_gpio_keys); - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR841N_V1, "TL-WR841N-v1.5", "TP-LINK TL-WR841N v1", - tl_wr841n_v1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr902ac-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr902ac-v1.c deleted file mode 100644 index 8d2cea828a..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr902ac-v1.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * TP-Link TL-WR902AC v1 board support - * - * Copyright (C) 2017 Piotr Dymacz <pepe2k@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - - -#define TL_WR902AC_V1_GPIO_LED_INTERNET 12 -#define TL_WR902AC_V1_GPIO_LED_LAN 15 -#define TL_WR902AC_V1_GPIO_LED_POWER 13 -#define TL_WR902AC_V1_GPIO_LED_USB 4 -#define TL_WR902AC_V1_GPIO_LED_WLAN2G 11 -#define TL_WR902AC_V1_GPIO_LED_WPS 0 - -#define TL_WR902AC_V1_GPIO_BTN_RESET 3 -#define TL_WR902AC_V1_GPIO_BTN_SW1 17 -#define TL_WR902AC_V1_GPIO_BTN_SW2 14 -#define TL_WR902AC_V1_GPIO_BTN_WPS 2 - -#define TL_WR902AC_V1_GPIO_USB_POWER 1 - -#define TL_WR902AC_V1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR902AC_V1_KEYS_DEBOUNCE_INTERVAL \ - (3 * TL_WR902AC_V1_KEYS_POLL_INTERVAL) - -static struct gpio_led tl_wr902ac_v1_leds_gpio[] __initdata = { - { - .name = "tl-wr902ac-v1:green:internet", - .gpio = TL_WR902AC_V1_GPIO_LED_INTERNET, - .active_low = 1, - }, { - .name = "tl-wr902ac-v1:green:lan", - .gpio = TL_WR902AC_V1_GPIO_LED_LAN, - .active_low = 0, - }, { - .name = "tl-wr902ac-v1:green:power", - .gpio = TL_WR902AC_V1_GPIO_LED_POWER, - .active_low = 0, - }, { - .name = "tl-wr902ac-v1:green:usb", - .gpio = TL_WR902AC_V1_GPIO_LED_USB, - .active_low = 0, - }, { - .name = "tl-wr902ac-v1:green:wlan2g", - .gpio = TL_WR902AC_V1_GPIO_LED_WLAN2G, - .active_low = 1, - }, { - .name = "tl-wr902ac-v1:green:wps", - .gpio = TL_WR902AC_V1_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_wr902ac_v1_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR902AC_V1_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR902AC_V1_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "sw1", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = TL_WR902AC_V1_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR902AC_V1_GPIO_BTN_SW1, - .active_low = 1, - }, { - .desc = "sw2", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = TL_WR902AC_V1_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR902AC_V1_GPIO_BTN_SW2, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR902AC_V1_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR902AC_V1_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static void __init tl_wr902ac_v1_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000); - u8 *mac = (u8 *) KSEG1ADDR(0x1f750008); - - ath79_register_m25p80(NULL); - - ath79_setup_ar933x_phy4_switch(false, false); - ath79_register_mdio(0, 0x0); - - /* LAN */ - ath79_switch_data.phy4_mii_en = 1; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.speed = SPEED_100; - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_register_eth(0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr902ac_v1_leds_gpio), - tl_wr902ac_v1_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WR902AC_V1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr902ac_v1_gpio_keys), - tl_wr902ac_v1_gpio_keys); - - gpio_request_one(TL_WR902AC_V1_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - - ath79_register_usb(); - - ath79_register_wmac(art + 0x1000, mac); - - ap91_pci_init(art + 0x5000, NULL); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR902AC_V1, "TL-WR902AC-V1", "TP-LINK TL-WR902AC v1", - tl_wr902ac_v1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr940n-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr940n-v4.c deleted file mode 100644 index 9324b2b924..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr940n-v4.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - * TP-LINK TL-WR940N v4 and v6 board support - * - * Copyright (C) 2016 David Lutz <kpanic@ff3l.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - - -#define TL_WR940N_V4_GPIO_LED_QSS 3 -#define TL_WR940N_V4_GPIO_LED_WAN 14 -#define TL_WR940N_V4_GPIO_LED_WAN_RED 15 -#define TL_WR940N_V4_GPIO_LED_LAN4 4 -#define TL_WR940N_V4_GPIO_LED_LAN3 18 -#define TL_WR940N_V4_GPIO_LED_LAN2 6 -#define TL_WR940N_V4_GPIO_LED_LAN1 8 -#define TL_WR940N_V4_GPIO_LED_WLAN 7 -#define TL_WR940N_V4_GPIO_LED_SYSTEM 5 -/* WR940N v6 specific GPIO*/ -#define TL_WR940N_V6_GPIO_LED_DIAG_ORANGE 15 -#define TL_WR940N_V6_GPIO_LED_WAN_BLUE 14 - -#define TL_WR940N_V4_GPIO_BTN_RESET 1 -#define TL_WR940N_V4_GPIO_BTN_RFKILL 2 - -#define TL_WR940N_KEYS_POLL_INTERVAL 20 -#define TL_WR940N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR940N_KEYS_POLL_INTERVAL) - - -static struct gpio_led tl_wr940n_v4_leds_gpio[] __initdata = { - { - .name = "tp-link:blue:qss", - .gpio = TL_WR940N_V4_GPIO_LED_QSS, - .active_low = 1, - }, - { - .name = "tp-link:blue:wan", - .gpio = TL_WR940N_V4_GPIO_LED_WAN, - .active_low = 1, - }, - { - .name = "tp-link:red:wan", - .gpio = TL_WR940N_V4_GPIO_LED_WAN_RED, - .active_low = 0, - }, - { - .name = "tp-link:blue:lan1", - .gpio = TL_WR940N_V4_GPIO_LED_LAN1, - .active_low = 1, - }, - { - .name = "tp-link:blue:lan2", - .gpio = TL_WR940N_V4_GPIO_LED_LAN2, - .active_low = 1, - }, - { - .name = "tp-link:blue:lan3", - .gpio = TL_WR940N_V4_GPIO_LED_LAN3, - .active_low = 1, - }, - { - .name = "tp-link:blue:lan4", - .gpio = TL_WR940N_V4_GPIO_LED_LAN4, - .active_low = 1, - }, - { - .name = "tp-link:blue:wlan", - .gpio = TL_WR940N_V4_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "tp-link:blue:system", - .gpio = TL_WR940N_V4_GPIO_LED_SYSTEM, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr940n_v4_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR940N_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR940N_V4_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "RFKILL button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = TL_WR940N_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR940N_V4_GPIO_BTN_RFKILL, - .active_low = 1, - } -}; - -static struct gpio_led tl_wr940n_v6_leds_gpio[] __initdata = { - { - .name = "tp-link:blue:wan", - .gpio = TL_WR940N_V6_GPIO_LED_WAN_BLUE, - .active_low = 1, - }, - { - .name = "tp-link:orange:diag", - .gpio = TL_WR940N_V6_GPIO_LED_DIAG_ORANGE, - .active_low = 0, - }, -}; - - -static const char *tl_wr940n_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr940n_flash_data = { - .part_probes = tl_wr940n_part_probes, -}; - - -static void __init tl_wr940n_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(&tl_wr940n_flash_data); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - - ath79_switch_data.phy4_mii_en = 1; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_wmac(ee, mac); - -} - -static void __init tl_wr940n_v4_setup(void) -{ - tl_wr940n_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr940n_v4_leds_gpio), - tl_wr940n_v4_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WR940N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr940n_v4_gpio_keys), - tl_wr940n_v4_gpio_keys); -} - -static void __init tl_wr940n_v6_setup(void) -{ - tl_wr940n_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr940n_v6_leds_gpio), - tl_wr940n_v6_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WR940N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr940n_v4_gpio_keys), - tl_wr940n_v4_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR940N_V4, "TL-WR940N-v4", "TP-LINK TL-WR940N v4", - tl_wr940n_v4_setup); -MIPS_MACHINE(ATH79_MACH_TL_WR940N_V6, "TL-WR940N-v6", "TP-LINK TL-WR940N v6", - tl_wr940n_v6_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd-v6.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd-v6.c deleted file mode 100644 index 8c788e2841..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd-v6.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * TP-LINK TL-WR941N/ND v6 board support - * - * Copyright (C) 2015 Matthias Schiffer <mschiffer@universe-factory.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - - -#define TL_WR941ND_V6_GPIO_LED_QSS 3 -#define TL_WR941ND_V6_GPIO_LED_WAN 14 -#define TL_WR941ND_V6_GPIO_LED_WAN_RED 15 -#define TL_WR941ND_V6_GPIO_LED_LAN1 7 -#define TL_WR941ND_V6_GPIO_LED_LAN2 6 -#define TL_WR941ND_V6_GPIO_LED_LAN3 5 -#define TL_WR941ND_V6_GPIO_LED_LAN4 4 -#define TL_WR941ND_V6_GPIO_LED_WLAN 8 -#define TL_WR941ND_V6_GPIO_LED_SYSTEM 18 - -#define TL_WR941ND_V6_GPIO_BTN_RESET 1 -#define TL_WR941ND_V6_GPIO_BTN_RFKILL 2 - -#define TL_WR941ND_V6_KEYS_POLL_INTERVAL 20 -#define TL_WR941ND_V6_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR941ND_V6_KEYS_POLL_INTERVAL) - - -static struct gpio_led tl_wr941nd_v6_leds_gpio[] __initdata = { - { - .name = "tp-link:blue:qss", - .gpio = TL_WR941ND_V6_GPIO_LED_QSS, - .active_low = 1, - }, - { - .name = "tp-link:blue:wan", - .gpio = TL_WR941ND_V6_GPIO_LED_WAN, - .active_low = 1, - }, - { - .name = "tp-link:red:wan", - .gpio = TL_WR941ND_V6_GPIO_LED_WAN_RED, - .active_low = 0, - }, - { - .name = "tp-link:blue:lan1", - .gpio = TL_WR941ND_V6_GPIO_LED_LAN1, - .active_low = 1, - }, - { - .name = "tp-link:blue:lan2", - .gpio = TL_WR941ND_V6_GPIO_LED_LAN2, - .active_low = 1, - }, - { - .name = "tp-link:blue:lan3", - .gpio = TL_WR941ND_V6_GPIO_LED_LAN3, - .active_low = 1, - }, - { - .name = "tp-link:blue:lan4", - .gpio = TL_WR941ND_V6_GPIO_LED_LAN4, - .active_low = 1, - }, - { - .name = "tp-link:blue:wlan", - .gpio = TL_WR941ND_V6_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "tp-link:blue:system", - .gpio = TL_WR941ND_V6_GPIO_LED_SYSTEM, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr941nd_v6_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR941ND_V6_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR941ND_V6_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "RFKILL button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = TL_WR941ND_V6_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR941ND_V6_GPIO_BTN_RFKILL, - .active_low = 1, - } -}; - - -static const char *tl_wr941n_v6_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr941n_v6_flash_data = { - .part_probes = tl_wr941n_v6_part_probes, -}; - - -static void __init tl_wr941nd_v6_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(&tl_wr941n_v6_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_v6_leds_gpio), - tl_wr941nd_v6_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WR941ND_V6_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr941nd_v6_gpio_keys), - tl_wr941nd_v6_gpio_keys); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); - - ath79_switch_data.phy4_mii_en = 1; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_wmac(ee, mac); - -} - -MIPS_MACHINE(ATH79_MACH_TL_WR941ND_V6, "TL-WR941ND-v6", "TP-LINK TL-WR941N/ND v6", - tl_wr941nd_v6_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd.c deleted file mode 100644 index 1ddeec730e..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * TP-LINK TL-WR941ND board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-dsa.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TL_WR941ND_GPIO_LED_SYSTEM 2 -#define TL_WR941ND_GPIO_LED_QSS_RED 4 -#define TL_WR941ND_GPIO_LED_QSS_GREEN 5 -#define TL_WR941ND_GPIO_LED_WLAN 9 - -#define TL_WR941ND_GPIO_BTN_RESET 3 -#define TL_WR941ND_GPIO_BTN_QSS 7 - -#define TL_WR941ND_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TL_WR941ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR941ND_KEYS_POLL_INTERVAL) - -static const char *tl_wr941nd_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data tl_wr941nd_flash_data = { - .part_probes = tl_wr941nd_part_probes, -}; - -static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = { - { - .name = "tp-link:green:system", - .gpio = TL_WR941ND_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tp-link:red:qss", - .gpio = TL_WR941ND_GPIO_LED_QSS_RED, - }, { - .name = "tp-link:green:qss", - .gpio = TL_WR941ND_GPIO_LED_QSS_GREEN, - }, { - .name = "tp-link:green:wlan", - .gpio = TL_WR941ND_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button tl_wr941nd_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR941ND_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR941ND_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static struct dsa_chip_data tl_wr941nd_dsa_chip = { - .port_names[0] = "wan", - .port_names[1] = "lan1", - .port_names[2] = "lan2", - .port_names[3] = "lan3", - .port_names[4] = "lan4", - .port_names[5] = "cpu", -}; - -static struct dsa_platform_data tl_wr941nd_dsa_data = { - .nr_chips = 1, - .chip = &tl_wr941nd_dsa_chip, -}; - -static void __init tl_wr941nd_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev, - &tl_wr941nd_dsa_data); - - ath79_register_m25p80(&tl_wr941nd_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio), - tl_wr941nd_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WR941ND_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr941nd_gpio_keys), - tl_wr941nd_gpio_keys); - ath79_register_wmac(eeprom, mac); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR941ND, "TL-WR941ND", "TP-LINK TL-WR941ND", - tl_wr941nd_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr942n-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr942n-v1.c deleted file mode 100644 index 32e2bc9521..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr942n-v1.c +++ /dev/null @@ -1,279 +0,0 @@ -/* - * TP-Link TL-WR942N(RU) v1 board support - * - * Copyright (C) 2017 Sergey Studzinski <serguzhg@gmail.com> - * Thanks to Henryk Heisig <hyniu@o2.pl> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/spi/spi_gpio.h> -#include <linux/spi/74x164.h> - -#include "common.h" -#include "dev-m25p80.h" -#include "machtypes.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "nvram.h" - -#define TL_WR942N_V1_KEYS_POLL_INTERVAL 20 -#define TL_WR942N_V1_KEYS_DEBOUNCE_INTERVAL \ - (3 * TL_WR942N_V1_KEYS_POLL_INTERVAL) - -#define TL_WR942N_V1_GPIO_BTN_RESET 1 -#define TL_WR942N_V1_GPIO_BTN_RFKILL 2 - -#define TL_WR942N_V1_GPIO_UART_TX 4 -#define TL_WR942N_V1_GPIO_UART_RX 5 - -#define TL_WR942N_V1_GPIO_LED_USB2 14 -#define TL_WR942N_V1_GPIO_LED_USB1 15 - -#define TL_WR942N_V1_GPIO_SHIFT_OE 16 -#define TL_WR942N_V1_GPIO_SHIFT_SER 17 -#define TL_WR942N_V1_GPIO_SHIFT_SRCLK 18 -#define TL_WR942N_V1_GPIO_SHIFT_SRCLR 19 -#define TL_WR942N_V1_GPIO_SHIFT_RCLK 20 -#define TL_WR942N_V1_GPIO_LED_WPS 21 -#define TL_WR942N_V1_GPIO_LED_STATUS 22 - -#define TL_WR942N_V1_74HC_GPIO_BASE 32 -#define TL_WR942N_V1_74HC_GPIO_LED_LAN4 (TL_WR942N_V1_74HC_GPIO_BASE + 0) -#define TL_WR942N_V1_74HC_GPIO_LED_LAN3 (TL_WR942N_V1_74HC_GPIO_BASE + 1) -#define TL_WR942N_V1_74HC_GPIO_LED_LAN2 (TL_WR942N_V1_74HC_GPIO_BASE + 2) -#define TL_WR942N_V1_74HC_GPIO_LED_LAN1 (TL_WR942N_V1_74HC_GPIO_BASE + 3) -#define TL_WR942N_V1_74HC_GPIO_LED_WAN_GREEN (TL_WR942N_V1_74HC_GPIO_BASE + 4) -#define TL_WR942N_V1_74HC_GPIO_LED_WAN_AMBER (TL_WR942N_V1_74HC_GPIO_BASE + 5) -#define TL_WR942N_V1_74HC_GPIO_LED_WLAN (TL_WR942N_V1_74HC_GPIO_BASE + 6) -#define TL_WR942N_V1_74HC_GPIO_HUB_RESET (TL_WR942N_V1_74HC_GPIO_BASE + 7) /* from u-boot sources */ - -#define TL_WR942N_V1_SSR_BIT_0 0 -#define TL_WR942N_V1_SSR_BIT_1 1 -#define TL_WR942N_V1_SSR_BIT_2 2 -#define TL_WR942N_V1_SSR_BIT_3 3 -#define TL_WR942N_V1_SSR_BIT_4 4 -#define TL_WR942N_V1_SSR_BIT_5 5 -#define TL_WR942N_V1_SSR_BIT_6 6 -#define TL_WR942N_V1_SSR_BIT_7 7 - -#define TL_WR942N_V1_WMAC_CALDATA_OFFSET 0x1000 -#define TL_WR942N_V1_DEFAULT_MAC_ADDR 0x1fe40008 -#define TL_WR942N_V1_DEFAULT_MAC_SIZE 0x200 - -#define GPIO_IN_ENABLE0_UART_SIN_LSB 8 -#define GPIO_IN_ENABLE0_UART_SIN_MASK 0x0000ff00 - -static struct gpio_led tl_wr942n_v1_leds_gpio[] __initdata = { - { - .name = "tl-wr942n-v1:green:status", - .gpio = TL_WR942N_V1_GPIO_LED_STATUS, - .active_low = 1, - }, { - .name = "tl-wr942n-v1:green:wlan", - .gpio = TL_WR942N_V1_74HC_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "tl-wr942n-v1:green:lan1", - .gpio = TL_WR942N_V1_74HC_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "tl-wr942n-v1:green:lan2", - .gpio = TL_WR942N_V1_74HC_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "tl-wr942n-v1:green:lan3", - .gpio = TL_WR942N_V1_74HC_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "tl-wr942n-v1:green:lan4", - .gpio = TL_WR942N_V1_74HC_GPIO_LED_LAN4, - .active_low = 1, - }, { - .name = "tl-wr942n-v1:green:wan", - .gpio = TL_WR942N_V1_74HC_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, { - .name = "tl-wr942n-v1:amber:wan", - .gpio = TL_WR942N_V1_74HC_GPIO_LED_WAN_AMBER, - .active_low = 1, - }, { - .name = "tl-wr942n-v1:green:wps", - .gpio = TL_WR942N_V1_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "tl-wr942n-v1:green:usb1", - .gpio = TL_WR942N_V1_GPIO_LED_USB1, - .active_low = 1, - }, { - .name = "tl-wr942n-v1:green:usb2", - .gpio = TL_WR942N_V1_GPIO_LED_USB2, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tl_wr942n_v1_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TL_WR942N_V1_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR942N_V1_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "RFKILL button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = TL_WR942N_V1_KEYS_DEBOUNCE_INTERVAL, - .gpio = TL_WR942N_V1_GPIO_BTN_RFKILL, - .active_low = 1, - }, -}; - -static struct spi_gpio_platform_data tl_wr942n_v1_spi_data = { - .sck = TL_WR942N_V1_GPIO_SHIFT_SRCLK, - .miso = SPI_GPIO_NO_MISO, - .mosi = TL_WR942N_V1_GPIO_SHIFT_SER, - .num_chipselect = 1, -}; - -static u8 tl_wr942n_v1_ssr_initdata[] = { - BIT(TL_WR942N_V1_SSR_BIT_7) | - BIT(TL_WR942N_V1_SSR_BIT_6) | - BIT(TL_WR942N_V1_SSR_BIT_5) | - BIT(TL_WR942N_V1_SSR_BIT_4) | - BIT(TL_WR942N_V1_SSR_BIT_3) | - BIT(TL_WR942N_V1_SSR_BIT_2) | - BIT(TL_WR942N_V1_SSR_BIT_1) | - BIT(TL_WR942N_V1_SSR_BIT_0) -}; - -static struct gen_74x164_chip_platform_data tl_wr942n_v1_ssr_data = { - .base = TL_WR942N_V1_74HC_GPIO_BASE, - .num_registers = ARRAY_SIZE(tl_wr942n_v1_ssr_initdata), - .init_data = tl_wr942n_v1_ssr_initdata, -}; - -static struct platform_device tl_wr942n_v1_spi_device = { - .name = "spi_gpio", - .id = 1, - .dev = { - .platform_data = &tl_wr942n_v1_spi_data, - }, -}; - -static struct spi_board_info tl_wr942n_v1_spi_info[] = { - { - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 10000000, - .modalias = "74x164", - .platform_data = &tl_wr942n_v1_ssr_data, - .controller_data = (void *) TL_WR942N_V1_GPIO_SHIFT_RCLK, - }, -}; - -static void tl_wr942n_v1_get_mac(const char *name, char *mac) -{ - u8 *nvram = (u8 *) KSEG1ADDR(TL_WR942N_V1_DEFAULT_MAC_ADDR); - int err; - - err = ath79_nvram_parse_mac_addr(nvram, TL_WR942N_V1_DEFAULT_MAC_SIZE, - name, mac); - - if (err) - pr_err("no MAC address found for %s\n", name); -} - -static void __init tl_wr942n_v1_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 tmpmac[ETH_ALEN]; - void __iomem *base; - u32 t; - - ath79_register_m25p80(NULL); - - spi_register_board_info(tl_wr942n_v1_spi_info, - ARRAY_SIZE(tl_wr942n_v1_spi_info)); - platform_device_register(&tl_wr942n_v1_spi_device); - - /* Check inherited UART RX GPIO definition */ - base = ioremap(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE); - - t = __raw_readl(base + QCA956X_GPIO_REG_IN_ENABLE0); - if (((t & GPIO_IN_ENABLE0_UART_SIN_MASK) - >> GPIO_IN_ENABLE0_UART_SIN_LSB) == TL_WR942N_V1_GPIO_LED_USB1) { - pr_warn("Active UART detected on USBLED's GPIOs!\n"); - - tl_wr942n_v1_leds_gpio[9].gpio = TL_WR942N_V1_GPIO_UART_TX; - tl_wr942n_v1_leds_gpio[10].gpio = TL_WR942N_V1_GPIO_UART_RX; - } - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr942n_v1_leds_gpio), - tl_wr942n_v1_leds_gpio); - - ath79_register_gpio_keys_polled(-1, TL_WR942N_V1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr942n_v1_gpio_keys), - tl_wr942n_v1_gpio_keys); - - tl_wr942n_v1_get_mac("MAC:", tmpmac); - - /* swap PHYs */ - ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP | - QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP); - - ath79_register_mdio(0, 0x0); - ath79_register_mdio(1, 0x0); - - /* WAN port */ - ath79_init_mac(ath79_eth0_data.mac_addr, tmpmac, 1); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - - /* swaped PHYs */ - ath79_eth0_data.phy_mask = BIT(0); - ath79_register_eth(0); - - /* LAN ports */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_init_mac(ath79_eth1_data.mac_addr, tmpmac, 0); - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - /* swaped PHYs */ - ath79_switch_data.phy_poll_mask |= BIT(0); - ath79_switch_data.phy4_mii_en = 1; - ath79_register_eth(1); - - ath79_register_wmac(art + TL_WR942N_V1_WMAC_CALDATA_OFFSET, tmpmac); - - ath79_register_usb(); - - gpio_request_one(TL_WR942N_V1_74HC_GPIO_HUB_RESET, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - - gpio_request_one(TL_WR942N_V1_GPIO_SHIFT_OE, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "LED control"); - - gpio_request_one(TL_WR942N_V1_GPIO_SHIFT_SRCLR, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "LED reset"); -} - -MIPS_MACHINE(ATH79_MACH_TL_WR942N_V1, "TL-WR942N-V1", "TP-LINK TL-WR942N v1", - tl_wr942n_v1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ts-d084.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ts-d084.c deleted file mode 100644 index 38786fdeda..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ts-d084.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * PISEN TS-D084 board support - * Based on TP-LINK TL-WR703N/TL-MR10U board support - * - * Copyright (C) 2011 dongyuqi <729650915@qq.com> - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TS_D084_GPIO_LED_SYSTEM 0 -#define TS_D084_GPIO_BTN_RESET 12 - - -#define TS_D084_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TS_D084_KEYS_DEBOUNCE_INTERVAL (3 * TS_D084_KEYS_POLL_INTERVAL) - -static const char *ts_d084_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data ts_d084_flash_data = { - .part_probes = ts_d084_part_probes, -}; - -static struct gpio_led ts_d084_leds_gpio[] __initdata = { - { - .name = "ts-d084:blue:system", - .gpio = TS_D084_GPIO_LED_SYSTEM, - .active_low = 0, - }, -}; - -static struct gpio_keys_button ts_d084_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TS_D084_KEYS_DEBOUNCE_INTERVAL, - .gpio = TS_D084_GPIO_BTN_RESET, - .active_low = 0, - } -}; - -static void __init ts_d084_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_m25p80(&ts_d084_flash_data); - ath79_register_leds_gpio(-1, ARRAY_SIZE(ts_d084_leds_gpio), - ts_d084_leds_gpio); - ath79_register_gpio_keys_polled(-1, TS_D084_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ts_d084_gpio_keys), - ts_d084_gpio_keys); - - ath79_register_usb(); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); - - ath79_register_wmac(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_TS_D084, "TS-D084", "PISEN TS-D084", - ts_d084_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tube2h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tube2h.c deleted file mode 100644 index 06b3616536..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tube2h.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * ALFA NETWORK Tube2H board support - * - * Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define TUBE2H_GPIO_LED_SIGNAL4 0 -#define TUBE2H_GPIO_LED_SIGNAL3 1 -#define TUBE2H_GPIO_LED_SIGNAL2 13 -#define TUBE2H_GPIO_LED_LAN 17 -#define TUBE2H_GPIO_LED_SIGNAL1 27 -#define TUBE2H_GPIO_EXT_LNA 28 - -#define TUBE2H_GPIO_WDT_EN 22 -#define TUBE2H_GPIO_WDT_IN 18 - -#define TUBE2H_GPIO_BTN_RESET 12 - -#define TUBE2H_KEYS_POLL_INTERVAL 20 /* msecs */ -#define TUBE2H_KEYS_DEBOUNCE_INTERVAL (3 * TUBE2H_KEYS_POLL_INTERVAL) - -#define TUBE2H_ART_ADDRESS 0x1fff0000 -#define TUBE2H_LAN_MAC_OFFSET 0x06 -#define TUBE2H_CALDATA_OFFSET 0x1000 - -static struct gpio_led tube2h_leds_gpio[] __initdata = { - { - .name = "alfa:blue:lan", - .gpio = TUBE2H_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "alfa:red:signal1", - .gpio = TUBE2H_GPIO_LED_SIGNAL1, - .active_low = 1, - }, - { - .name = "alfa:orange:signal2", - .gpio = TUBE2H_GPIO_LED_SIGNAL2, - .active_low = 0, - }, - { - .name = "alfa:green:signal3", - .gpio = TUBE2H_GPIO_LED_SIGNAL3, - .active_low = 0, - }, - { - .name = "alfa:green:signal4", - .gpio = TUBE2H_GPIO_LED_SIGNAL4, - .active_low = 0, - }, -}; - -static struct gpio_keys_button tube2h_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TUBE2H_KEYS_DEBOUNCE_INTERVAL, - .gpio = TUBE2H_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static void __init tube2h_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(TUBE2H_ART_ADDRESS); - u32 t; - - ath79_gpio_function_disable(AR933X_GPIO_FUNC_JTAG_DISABLE | - AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - /* Ensure that GPIO26 and GPIO27 are controllable by software */ - t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); - t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN; - ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t); - - gpio_request_one(TUBE2H_GPIO_EXT_LNA, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "external LNA0"); - - gpio_request_one(TUBE2H_GPIO_WDT_IN, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "WDT input"); - - gpio_request_one(TUBE2H_GPIO_WDT_EN, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, - "WDT enable"); - - ath79_register_wmac(art + TUBE2H_CALDATA_OFFSET, NULL); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(tube2h_leds_gpio), - tube2h_leds_gpio); - ath79_register_gpio_keys_polled(-1, TUBE2H_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tube2h_gpio_keys), - tube2h_gpio_keys); - - ath79_init_mac(ath79_eth0_data.mac_addr, - art + TUBE2H_LAN_MAC_OFFSET, 0); - ath79_register_mdio(0, 0x0); - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_TUBE2H, "TUBE2H", "ALFA NETWORK Tube2H", - tube2h_setup); - diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c deleted file mode 100644 index 09a0bba867..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Ubiquiti UniFi AC (LITE) board support - * - * Copyright (C) 2015-2016 P. Wassi <p.wassi at gmx.at> - * - * Derived from: mach-ubnt-xm.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/etherdevice.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/irq.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include <linux/platform_data/phy-at803x.h> -#include <linux/ar8216_platform.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "dev-usb.h" -#include "machtypes.h" - - -#define UNIFIAC_KEYS_POLL_INTERVAL 20 -#define UNIFIAC_KEYS_DEBOUNCE_INTERVAL (3 * UNIFIAC_KEYS_POLL_INTERVAL) - -#define UNIFIAC_GPIO_LED_WHITE 7 -#define UNIFIAC_GPIO_LED_BLUE 8 - -#define UNIFIAC_GPIO_BTN_RESET 2 - -#define UNIFIAC_MAC0_OFFSET 0x0000 -#define UNIFIAC_WMAC_CALDATA_OFFSET 0x1000 -#define UNIFIAC_PCI_CALDATA_OFFSET 0x5000 - - -static struct flash_platform_data ubnt_unifiac_flash_data = { - /* mx25l12805d and mx25l12835f have the same JEDEC ID */ - .type = "mx25l12805d", -}; - -static struct gpio_led ubnt_unifiac_leds_gpio[] __initdata = { - { - .name = "ubnt:white:dome", - .gpio = UNIFIAC_GPIO_LED_WHITE, - .active_low = 0, - }, { - .name = "ubnt:blue:dome", - .gpio = UNIFIAC_GPIO_LED_BLUE, - .active_low = 0, - } -}; - -static struct gpio_keys_button ubnt_unifiac_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = UNIFIAC_KEYS_DEBOUNCE_INTERVAL, - .gpio = UNIFIAC_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init ubnt_unifiac_lite_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(&ubnt_unifiac_flash_data); - - - ath79_init_mac(ath79_eth0_data.mac_addr, - eeprom + UNIFIAC_MAC0_OFFSET, 0); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_pll_data.pll_10 = 0x00001313; - - ath79_register_mdio(0, ~BIT(4)); - ath79_register_eth(0); - - - ath79_register_wmac(eeprom + UNIFIAC_WMAC_CALDATA_OFFSET, NULL); - - - ap91_pci_init(eeprom + UNIFIAC_PCI_CALDATA_OFFSET, NULL); - - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifiac_leds_gpio), - ubnt_unifiac_leds_gpio); - - ath79_register_gpio_keys_polled(-1, UNIFIAC_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ubnt_unifiac_gpio_keys), - ubnt_unifiac_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC_LITE, "UBNT-UF-AC-LITE", - "Ubiquiti UniFi-AC-LITE/MESH", ubnt_unifiac_lite_setup); - -static struct ar8327_pad_cfg ubnt_unifiac_pro_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -static struct ar8327_platform_data ubnt_unifiac_pro_ar8327_data = { - .pad0_cfg = &ubnt_unifiac_pro_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - - -static struct mdio_board_info ubnt_unifiac_pro_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &ubnt_unifiac_pro_ar8327_data, - }, -}; - -static void __init ubnt_unifiac_pro_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(&ubnt_unifiac_flash_data); - - - ath79_init_mac(ath79_eth0_data.mac_addr, - eeprom + UNIFIAC_MAC0_OFFSET, 0); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_mask = BIT(0); - - mdiobus_register_board_info(ubnt_unifiac_pro_mdio0_info, - ARRAY_SIZE(ubnt_unifiac_pro_mdio0_info)); - - ath79_register_mdio(0, 0x00); - ath79_register_eth(0); - - - ath79_register_usb(); - - - ath79_register_wmac(eeprom + UNIFIAC_WMAC_CALDATA_OFFSET, NULL); - - - ap91_pci_init(eeprom + UNIFIAC_PCI_CALDATA_OFFSET, NULL); - - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifiac_leds_gpio), - ubnt_unifiac_leds_gpio); - - ath79_register_gpio_keys_polled(-1, UNIFIAC_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ubnt_unifiac_gpio_keys), - ubnt_unifiac_gpio_keys); -} - - -MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC_PRO, "UBNT-UF-AC-PRO", - "Ubiquiti UniFi-AC-PRO/MESH-PRO", ubnt_unifiac_pro_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-xm.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-xm.c deleted file mode 100644 index 6ceb91efff..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-xm.c +++ /dev/null @@ -1,781 +0,0 @@ -/* - * Ubiquiti Networks XM (rev 1.0) board support - * - * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> - * - * Derived from: mach-pb44.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/etherdevice.h> -#include <linux/ar8216_platform.h> -#include <linux/platform_data/phy-at803x.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/irq.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include <linux/platform_data/phy-at803x.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define UBNT_XM_GPIO_LED_L1 0 -#define UBNT_XM_GPIO_LED_L2 1 -#define UBNT_XM_GPIO_LED_L3 11 -#define UBNT_XM_GPIO_LED_L4 7 - -#define UBNT_XM_GPIO_BTN_RESET 12 - -#define UBNT_XM_KEYS_POLL_INTERVAL 20 -#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL) - -#define UBNT_XM_EEPROM_ADDR 0x1fff1000 - -static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { - { - .name = "ubnt:red:link1", - .gpio = UBNT_XM_GPIO_LED_L1, - .active_low = 0, - }, { - .name = "ubnt:orange:link2", - .gpio = UBNT_XM_GPIO_LED_L2, - .active_low = 0, - }, { - .name = "ubnt:green:link3", - .gpio = UBNT_XM_GPIO_LED_L3, - .active_low = 0, - }, { - .name = "ubnt:green:link4", - .gpio = UBNT_XM_GPIO_LED_L4, - .active_low = 0, - }, -}; - -static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, - .gpio = UBNT_XM_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -#define UBNT_M_WAN_PHYMASK BIT(4) - -static void __init ubnt_xm_init(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR); - u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), - ubnt_xm_leds_gpio); - - ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ubnt_xm_gpio_keys), - ubnt_xm_gpio_keys); - - ath79_register_m25p80(NULL); - ap91_pci_init(eeprom, NULL); - - ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); - ath79_eth0_data.speed = SPEED_100; - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); - ath79_eth1_data.speed = SPEED_100; - ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_UBNT_XM, - "UBNT-XM", - "Ubiquiti Networks XM (rev 1.0) board", - ubnt_xm_init); - -MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M", - ubnt_xm_init); - -static void __init ubnt_rocket_m_setup(void) -{ - ubnt_xm_init(); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M", - ubnt_rocket_m_setup); - -static void __init ubnt_nano_m_setup(void) -{ - ubnt_xm_init(); - ath79_register_eth(1); -} - -MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M", - ubnt_nano_m_setup); - -static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = { - { - .name = "ubnt:green:globe", - .gpio = 0, - .active_low = 1, - }, { - .name = "ubnt:green:power", - .gpio = 11, - .active_low = 1, - .default_state = LEDS_GPIO_DEFSTATE_ON, - } -}; - -static void __init ubnt_airrouter_setup(void) -{ - u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(NULL); - ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); - ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1); - - ath79_register_eth(1); - ath79_register_eth(0); - ath79_register_usb(); - - ap91_pci_init(ee, NULL); - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio), - ubnt_airrouter_leds_gpio); - - ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ubnt_xm_gpio_keys), - ubnt_xm_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter", - ubnt_airrouter_setup); - -static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = { - { - .name = "ubnt:orange:dome", - .gpio = 1, - .active_low = 0, - }, { - .name = "ubnt:green:dome", - .gpio = 0, - .active_low = 0, - } -}; - -static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = { - { - .name = "ubnt:orange:front", - .gpio = 1, - .active_low = 0, - }, { - .name = "ubnt:green:front", - .gpio = 0, - .active_low = 0, - } -}; - -static struct gpio_led ubnt_unifi_outdoor_plus_leds_gpio[] __initdata = { - { - .name = "ubnt:white:front", - .gpio = 1, - .active_low = 0, - }, { - .name = "ubnt:blue:front", - .gpio = 0, - .active_low = 0, - } -}; - - -static void __init ubnt_unifi_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(NULL); - - ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_register_eth(0); - - ap91_pci_init(ee, NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio), - ubnt_unifi_leds_gpio); - - ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ubnt_xm_gpio_keys), - ubnt_xm_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi", - ubnt_unifi_setup); - - -#define UBNT_UNIFIOD_PRI_PHYMASK BIT(4) -#define UBNT_UNIFIOD_2ND_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3)) - -static void __init ubnt_unifi_outdoor_setup(void) -{ - u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(NULL); - - ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK | - UBNT_UNIFIOD_2ND_PHYMASK)); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); - ath79_register_eth(0); - ath79_register_eth(1); - - ap91_pci_init(ee, NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio), - ubnt_unifi_outdoor_leds_gpio); - - ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ubnt_xm_gpio_keys), - ubnt_xm_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20", - "Ubiquiti UniFiAP Outdoor", - ubnt_unifi_outdoor_setup); - - -static void __init ubnt_unifi_outdoor_plus_setup(void) -{ - u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(NULL); - - ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK | - UBNT_UNIFIOD_2ND_PHYMASK)); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); - ath79_register_eth(0); - ath79_register_eth(1); - - ap9x_pci_get_wmac_data(0)->ubnt_hsr = true; - ap91_pci_init(ee, NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_plus_leds_gpio), - ubnt_unifi_outdoor_plus_leds_gpio); - - ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ubnt_xm_gpio_keys), - ubnt_xm_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, "UBNT-UOP", - "Ubiquiti UniFiAP Outdoor+", - ubnt_unifi_outdoor_plus_setup); - - -static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = { - { - .name = "ubnt:white:dome", - .gpio = 12, - }, { - .name = "ubnt:blue:dome", - .gpio = 13, - } -}; - -static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, - .gpio = 17, - .active_low = 1, - } -}; - -static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_platform_data uap_pro_ar8327_data = { - .pad0_cfg = &uap_pro_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info uap_pro_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &uap_pro_ar8327_data, - }, -}; - -#define UAP_PRO_MAC0_OFFSET 0x0000 -#define UAP_PRO_MAC1_OFFSET 0x0006 -#define UAP_PRO_WMAC_CALDATA_OFFSET 0x1000 -#define UAP_PRO_PCI_CALDATA_OFFSET 0x5000 - -static void __init ubnt_uap_pro_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds), - ubnt_uap_pro_gpio_leds); - ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, - ARRAY_SIZE(uap_pro_gpio_keys), - uap_pro_gpio_keys); - - ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); - ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); - - ath79_register_mdio(0, 0x0); - mdiobus_register_board_info(uap_pro_mdio0_info, - ARRAY_SIZE(uap_pro_mdio0_info)); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); - ath79_init_mac(ath79_eth0_data.mac_addr, - eeprom + UAP_PRO_MAC0_OFFSET, 0); - - /* GMAC0 is connected to an AR8327 switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro", - ubnt_uap_pro_setup); - -#define UBNT_XW_GPIO_LED_L1 11 -#define UBNT_XW_GPIO_LED_L2 16 -#define UBNT_XW_GPIO_LED_L3 13 -#define UBNT_XW_GPIO_LED_L4 14 - -static struct gpio_led ubnt_xw_leds_gpio[] __initdata = { - { - .name = "ubnt:red:link1", - .gpio = UBNT_XW_GPIO_LED_L1, - .active_low = 1, - }, { - .name = "ubnt:orange:link2", - .gpio = UBNT_XW_GPIO_LED_L2, - .active_low = 1, - }, { - .name = "ubnt:green:link3", - .gpio = UBNT_XW_GPIO_LED_L3, - .active_low = 1, - }, { - .name = "ubnt:green:link4", - .gpio = UBNT_XW_GPIO_LED_L4, - .active_low = 1, - }, -}; - -#define UBNT_ROCKET_TI_GPIO_LED_L1 16 -#define UBNT_ROCKET_TI_GPIO_LED_L2 17 -#define UBNT_ROCKET_TI_GPIO_LED_L3 18 -#define UBNT_ROCKET_TI_GPIO_LED_L4 19 -#define UBNT_ROCKET_TI_GPIO_LED_L5 20 -#define UBNT_ROCKET_TI_GPIO_LED_L6 21 -static struct gpio_led ubnt_rocket_ti_leds_gpio[] __initdata = { - { - .name = "ubnt:green:link1", - .gpio = UBNT_ROCKET_TI_GPIO_LED_L1, - .active_low = 1, - }, { - .name = "ubnt:green:link2", - .gpio = UBNT_ROCKET_TI_GPIO_LED_L2, - .active_low = 1, - }, { - .name = "ubnt:green:link3", - .gpio = UBNT_ROCKET_TI_GPIO_LED_L3, - .active_low = 1, - }, { - .name = "ubnt:green:link4", - .gpio = UBNT_ROCKET_TI_GPIO_LED_L4, - .active_low = 0, - }, { - .name = "ubnt:green:link5", - .gpio = UBNT_ROCKET_TI_GPIO_LED_L5, - .active_low = 0, - }, { - .name = "ubnt:green:link6", - .gpio = UBNT_ROCKET_TI_GPIO_LED_L6, - .active_low = 0, - }, -}; - -static void __init ubnt_xw_init(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio), - ubnt_xw_leds_gpio); - ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ubnt_xm_gpio_keys), - ubnt_xm_gpio_keys); - - ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); - ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); - - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE); - ath79_init_mac(ath79_eth0_data.mac_addr, - eeprom + UAP_PRO_MAC0_OFFSET, 0); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; -} - -static void __init ubnt_nano_m_xw_setup(void) -{ - ubnt_xw_init(); - - /* GMAC0 is connected to an AR8326 switch */ - ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5))); - ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5)); - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_register_eth(0); -} - -static struct at803x_platform_data ubnt_loco_m_xw_at803x_data = { - .has_reset_gpio = 1, - .reset_gpio = 0, -}; - -static struct mdio_board_info ubnt_loco_m_xw_mdio_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 1, - .platform_data = &ubnt_loco_m_xw_at803x_data, - }, -}; - -static void __init ubnt_loco_m_xw_setup(void) -{ - ubnt_xw_init(); - - mdiobus_register_board_info(ubnt_loco_m_xw_mdio_info, - ARRAY_SIZE(ubnt_loco_m_xw_mdio_info)); - - ath79_register_mdio(0, ~BIT(1)); - ath79_eth0_data.phy_mask = BIT(1); - ath79_register_eth(0); -} - -#define UBNT_LBE_M5_GPIO_LED_LAN 13 -#define UBNT_LBE_M5_GPIO_LED_WLAN 14 -#define UBNT_LBE_M5_GPIO_LED_SYS 16 - -static struct gpio_led ubnt_lbe_m5_leds_gpio[] __initdata = { - { - .name = "ubnt:green:lan", - .gpio = UBNT_LBE_M5_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "ubnt:green:wlan", - .gpio = UBNT_LBE_M5_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "ubnt:green:sys", - .gpio = UBNT_LBE_M5_GPIO_LED_SYS, - .active_low = 1, - }, -}; - -static void __init ubnt_lbe_m5_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); - ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_lbe_m5_leds_gpio), - ubnt_lbe_m5_leds_gpio); - ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ubnt_xm_gpio_keys), - ubnt_xm_gpio_keys); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | - AR934X_ETH_CFG_MII_GMAC0_SLAVE); - ath79_init_mac(ath79_eth0_data.mac_addr, - eeprom + UAP_PRO_MAC0_OFFSET, 0); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - - gpio_request_one(0, GPIOF_OUT_INIT_LOW | GPIOF_ACTIVE_LOW | - GPIOF_EXPORT_DIR_FIXED, "SPI nWP"); - - mdiobus_register_board_info(ubnt_loco_m_xw_mdio_info, - ARRAY_SIZE(ubnt_loco_m_xw_mdio_info)); - - ath79_register_mdio(0, ~BIT(1)); - ath79_eth0_data.phy_mask = BIT(1); - ath79_register_eth(0); -} - -static void __init ubnt_rocket_m_xw_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio), - ubnt_xw_leds_gpio); - ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ubnt_xm_gpio_keys), - ubnt_xm_gpio_keys); - - ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); - ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); - ath79_init_mac(ath79_eth0_data.mac_addr, - eeprom + UAP_PRO_MAC0_OFFSET, 0); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - - ath79_register_mdio(0, ~BIT(4)); - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_register_eth(0); -} - -static struct at803x_platform_data ubnt_rocket_m_ti_at803_data = { - .disable_smarteee = 1, - .enable_rgmii_rx_delay = 1, - .enable_rgmii_tx_delay = 1, -}; -static struct mdio_board_info ubnt_rocket_m_ti_mdio_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 4, - .platform_data = &ubnt_rocket_m_ti_at803_data, - }, -}; - -static void __init ubnt_rocket_m_ti_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rocket_ti_leds_gpio), - ubnt_rocket_ti_leds_gpio); - ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ubnt_xm_gpio_keys), - ubnt_xm_gpio_keys); - - ap91_pci_init(eeprom + 0x1000, NULL); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); - ath79_setup_ar934x_eth_rx_delay(3, 3); - ath79_init_mac(ath79_eth0_data.mac_addr, - eeprom + UAP_PRO_MAC0_OFFSET, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, - eeprom + UAP_PRO_MAC1_OFFSET, 0); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev; - - mdiobus_register_board_info(ubnt_rocket_m_ti_mdio_info, - ARRAY_SIZE(ubnt_rocket_m_ti_mdio_info)); - ath79_register_mdio(0, 0x0); - - - ath79_eth0_data.phy_mask = BIT(4); - /* read out from vendor */ - ath79_eth0_pll_data.pll_1000 = 0x2000000; - ath79_eth0_pll_data.pll_10 = 0x1313; - ath79_register_eth(0); - - ath79_register_mdio(1, 0x0); - ath79_eth1_data.phy_mask = BIT(3); - ath79_register_eth(1); -} - - -MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW", - ubnt_nano_m_xw_setup); - -MIPS_MACHINE(ATH79_MACH_UBNT_LBE_M5, "UBNT-LBE-M5", "Ubiquiti Litebeam M5", - ubnt_lbe_m5_setup); - -MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW", - ubnt_loco_m_xw_setup); - -MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_XW, "UBNT-RM-XW", "Ubiquiti Rocket M XW", - ubnt_rocket_m_xw_setup); - -MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M_XW, "UBNT-BM-XW", "Ubiquiti Bullet M XW", - ubnt_rocket_m_xw_setup); - -MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_TI, "UBNT-RM-TI", "Ubiquiti Rocket M TI", - ubnt_rocket_m_ti_setup); - -static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = { - { - .name = "ubnt:blue:wlan", - .gpio = 0, - }, { - .name = "ubnt:white:status", - .gpio = 1, - }, -}; - -static struct gpio_keys_button airgateway_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, - .gpio = 12, - .active_low = 1, - } -}; - -static void __init ubnt_airgateway_setup(void) -{ - u32 t; - u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - - ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); - t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN; - ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t); - - ath79_register_m25p80(NULL); - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_gpio_leds), - ubnt_airgateway_gpio_leds); - - ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, - ARRAY_SIZE(airgateway_gpio_keys), - airgateway_gpio_keys); - - ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0); - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); - - ath79_register_mdio(0, 0x0); - - ath79_register_eth(1); - ath79_register_eth(0); - - ath79_register_wmac(ee, NULL); -} - -MIPS_MACHINE(ATH79_MACH_UBNT_AIRGW, "UBNT-AGW", "Ubiquiti AirGateway", - ubnt_airgateway_setup); - -static struct gpio_led ubnt_airgateway_pro_gpio_leds[] __initdata = { - { - .name = "ubnt:blue:wlan", - .gpio = 13, - }, { - .name = "ubnt:white:status", - .gpio = 17, - }, -}; - - -static struct gpio_keys_button airgateway_pro_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, - .gpio = 12, - .active_low = 1, - } -}; - -static void __init ubnt_airgateway_pro_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_pro_gpio_leds), - ubnt_airgateway_pro_gpio_leds); - - ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, - ARRAY_SIZE(airgateway_pro_gpio_keys), - airgateway_pro_gpio_keys); - - ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); - ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); - - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); - - ath79_register_mdio(1, 0x0); - - /* GMAC0 is left unused in this configuration */ - - /* GMAC1 is connected to MAC0 on the internal switch */ - /* The PoE/WAN port connects to port 5 on the internal switch */ - /* The LAN port connects to port 4 on the internal switch */ - ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_register_eth(1); - -} - -MIPS_MACHINE(ATH79_MACH_UBNT_AIRGWP, "UBNT-AGWP", "Ubiquiti AirGateway Pro", - ubnt_airgateway_pro_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt.c deleted file mode 100644 index e49ac23fd1..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Ubiquiti RouterStation support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * Copyright (C) 2008 Ubiquiti <support@ubnt.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -#define UBNT_RS_GPIO_LED_RF 2 -#define UBNT_RS_GPIO_SW4 8 - -#define UBNT_LS_SR71_GPIO_LED_D25 0 -#define UBNT_LS_SR71_GPIO_LED_D26 1 -#define UBNT_LS_SR71_GPIO_LED_D24 2 -#define UBNT_LS_SR71_GPIO_LED_D23 4 -#define UBNT_LS_SR71_GPIO_LED_D22 5 -#define UBNT_LS_SR71_GPIO_LED_D27 6 -#define UBNT_LS_SR71_GPIO_LED_D28 7 - -#define UBNT_KEYS_POLL_INTERVAL 20 /* msecs */ -#define UBNT_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_KEYS_POLL_INTERVAL) - -static struct gpio_led ubnt_rs_leds_gpio[] __initdata = { - { - .name = "ubnt:green:rf", - .gpio = UBNT_RS_GPIO_LED_RF, - .active_low = 0, - } -}; - -static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = { - { - .name = "ubnt:green:d22", - .gpio = UBNT_LS_SR71_GPIO_LED_D22, - .active_low = 0, - }, { - .name = "ubnt:green:d23", - .gpio = UBNT_LS_SR71_GPIO_LED_D23, - .active_low = 0, - }, { - .name = "ubnt:green:d24", - .gpio = UBNT_LS_SR71_GPIO_LED_D24, - .active_low = 0, - }, { - .name = "ubnt:red:d25", - .gpio = UBNT_LS_SR71_GPIO_LED_D25, - .active_low = 0, - }, { - .name = "ubnt:red:d26", - .gpio = UBNT_LS_SR71_GPIO_LED_D26, - .active_low = 0, - }, { - .name = "ubnt:green:d27", - .gpio = UBNT_LS_SR71_GPIO_LED_D27, - .active_low = 0, - }, { - .name = "ubnt:green:d28", - .gpio = UBNT_LS_SR71_GPIO_LED_D28, - .active_low = 0, - } -}; - -static struct gpio_keys_button ubnt_gpio_keys[] __initdata = { - { - .desc = "sw4", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = UBNT_KEYS_DEBOUNCE_INTERVAL, - .gpio = UBNT_RS_GPIO_SW4, - .active_low = 1, - } -}; - -static const char *ubnt_part_probes[] = { - "RedBoot", - NULL, -}; - -static struct flash_platform_data ubnt_flash_data = { - .part_probes = ubnt_part_probes, -}; - -static void __init ubnt_generic_setup(void) -{ - ath79_register_m25p80(&ubnt_flash_data); - - ath79_register_gpio_keys_polled(-1, UBNT_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ubnt_gpio_keys), - ubnt_gpio_keys); - ath79_register_pci(); -} - -#define UBNT_RS_WAN_PHYMASK BIT(20) -#define UBNT_RS_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19)) - -static void __init ubnt_rs_setup(void) -{ - ubnt_generic_setup(); - - ath79_register_mdio(0, ~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK)); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK; - - /* - * There is Secondary MAC address duplicate problem with some - * UBNT HW batches. Do not increase Secondary MAC address by 1 - * but do workaround with 'Locally Administrated' bit. - */ - ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.speed = SPEED_100; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_usb(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio), - ubnt_rs_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation", - ubnt_rs_setup); - -#define UBNT_RSPRO_WAN_PHYMASK BIT(4) -#define UBNT_RSPRO_LAN_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3)) - -static void __init ubnt_rspro_setup(void) -{ - ubnt_generic_setup(); - - ath79_register_mdio(0, ~(UBNT_RSPRO_WAN_PHYMASK | - UBNT_RSPRO_LAN_PHYMASK)); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK; - - /* - * There is Secondary MAC address duplicate problem with some - * UBNT HW batches. Do not increase Secondary MAC address by 1 - * but do workaround with 'Locally Administrated' bit. - */ - ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_usb(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio), - ubnt_rs_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_UBNT_RSPRO, "UBNT-RSPRO", "Ubiquiti RouterStation Pro", - ubnt_rspro_setup); - -static void __init ubnt_lsx_setup(void) -{ - ubnt_generic_setup(); -} - -MIPS_MACHINE(ATH79_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup); - -#define UBNT_LSSR71_PHY_MASK BIT(1) - -static void __init ubnt_lssr71_setup(void) -{ - ubnt_generic_setup(); - - ath79_register_mdio(0, ~UBNT_LSSR71_PHY_MASK); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK; - - ath79_register_eth(0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio), - ubnt_ls_sr71_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71", - ubnt_lssr71_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wam250.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wam250.c deleted file mode 100644 index 31817bddf2..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wam250.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * Samsung WAM250 board support - * - * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define WAM250_GPIO_LED_LAN 13 -#define WAM250_GPIO_LED_POWER 15 -#define WAM250_GPIO_LED_REPEATER 14 -#define WAM250_GPIO_LED_WLAN 12 - -#define WAM250_GPIO_BTN_RESET 17 -#define WAM250_GPIO_BTN_SPKADD 1 - -#define WAM250_GPIO_EXT_LNA 19 - -#define WAM250_MAC_OFFSET 2 - -#define WAM250_KEYS_POLL_INTERVAL 20 -#define WAM250_KEYS_DEBOUNCE_INTERVAL (3 * WAM250_KEYS_POLL_INTERVAL) - -static struct gpio_led wam250_leds_gpio[] __initdata = { - { - .name = "wam250:white:lan", - .gpio = WAM250_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "wam250:white:power", - .gpio = WAM250_GPIO_LED_POWER, - .default_state = LEDS_GPIO_DEFSTATE_KEEP, - .active_low = 1, - }, { - .name = "wam250:white:repeater", - .gpio = WAM250_GPIO_LED_REPEATER, - .active_low = 1, - }, { - .name = "wam250:white:wlan", - .gpio = WAM250_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button wam250_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WAM250_KEYS_DEBOUNCE_INTERVAL, - .gpio = WAM250_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WAM250_KEYS_DEBOUNCE_INTERVAL, - .gpio = WAM250_GPIO_BTN_SPKADD, - .active_low = 1, - }, -}; - -static void __init wam250_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(NULL); - - ath79_register_mdio(1, 0x0); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP); - - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = 0xfd; - - /* LAN */ - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.phy_mask = BIT(1); - ath79_init_mac(ath79_eth1_data.mac_addr, art + WAM250_MAC_OFFSET, 0); - ath79_register_eth(1); - - /* WAN */ - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.speed = SPEED_100; - ath79_init_mac(ath79_eth0_data.mac_addr, art + WAM250_MAC_OFFSET, 1); - ath79_register_eth(0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wam250_leds_gpio), - wam250_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WAM250_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wam250_gpio_keys), - wam250_gpio_keys); - - ath79_wmac_set_ext_lna_gpio(0, WAM250_GPIO_EXT_LNA); - - ath79_register_usb(); - ath79_register_wmac(art, NULL); -} - -MIPS_MACHINE(ATH79_MACH_WAM250, "WAM250", "Samsung WAM250", wam250_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-weio.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-weio.c deleted file mode 100644 index 3973ada7c3..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-weio.c +++ /dev/null @@ -1,140 +0,0 @@ -/** - * WEIO Web Of Things Platform - * - * Copyright (C) 2013 Drasko DRASKOVIC and Uros PETREVSKI - * - * ## ## ######## #### ####### - * ## ## ## ## ## ## ## - * ## ## ## ## ## ## ## - * ## ## ## ###### ## ## ## - * ## ## ## ## ## ## ## - * ## ## ## ## ## ## ## - * ### ### ######## #### ####### - * - * Web Of Things Platform - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Authors : - * Drasko DRASKOVIC <drasko.draskovic@gmail.com> - * Uros PETREVSKI <uros@nodesign.net> - */ - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include <linux/i2c-gpio.h> -#include <linux/platform_device.h> -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define WEIO_GPIO_LED_STA 1 -#define WEIO_GPIO_LED_AP 16 - -#define WEIO_GPIO_BTN_AP 20 -#define WEIO_GPIO_BTN_RESET 23 - -#define WEIO_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WEIO_KEYS_DEBOUNCE_INTERVAL (3 * WEIO_KEYS_POLL_INTERVAL) - -#define WEIO_MAC0_OFFSET 0x0000 -#define WEIO_MAC1_OFFSET 0x0006 -#define WEIO_CALDATA_OFFSET 0x1000 -#define WEIO_WMAC_MAC_OFFSET 0x1002 - -static struct gpio_led weio_leds_gpio[] __initdata = { - { - .name = "weio:green:sta", - .gpio = WEIO_GPIO_LED_STA, - .active_low = 1, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, - { - .name = "weio:green:ap", - .gpio = WEIO_GPIO_LED_AP, - .active_low = 1, - .default_state = LEDS_GPIO_DEFSTATE_ON, - } -}; - -static struct gpio_keys_button weio_gpio_keys[] __initdata = { - { - .desc = "ap button", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = WEIO_KEYS_DEBOUNCE_INTERVAL, - .gpio = WEIO_GPIO_BTN_AP, - .active_low = 1, - }, - { - .desc = "soft-reset button", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = WEIO_KEYS_DEBOUNCE_INTERVAL, - .gpio = WEIO_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct i2c_gpio_platform_data weio_i2c_gpio_data = { - .sda_pin = 18, - .scl_pin = 19, -}; - -static struct platform_device weio_i2c_gpio = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &weio_i2c_gpio_data, - }, -}; - -static void __init weio_common_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - ath79_register_wmac(art + WEIO_CALDATA_OFFSET, art + WEIO_WMAC_MAC_OFFSET); -} - -static void __init weio_setup(void) -{ - weio_common_setup(); - - ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - platform_device_register(&weio_i2c_gpio); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(weio_leds_gpio), - weio_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WEIO_KEYS_POLL_INTERVAL, - ARRAY_SIZE(weio_gpio_keys), - weio_gpio_keys); - - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_WEIO, "WEIO", "WeIO board", weio_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-whr-hp-g300n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-whr-hp-g300n.c deleted file mode 100644 index 48f49ad0f7..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-whr-hp-g300n.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * Buffalo WHR-HP-G300N board support - * - * based on ... - * - * TP-LINK TL-WR741ND board support - * - * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -#define WHRHPG300N_GPIO_LED_SECURITY 0 -#define WHRHPG300N_GPIO_LED_DIAG 1 -#define WHRHPG300N_GPIO_LED_ROUTER 6 - -#define WHRHPG300N_GPIO_BTN_ROUTER_ON 7 -#define WHRHPG300N_GPIO_BTN_ROUTER_AUTO 8 -#define WHRHPG300N_GPIO_BTN_RESET 11 -#define WHRHPG300N_GPIO_BTN_AOSS 12 -#define WHRHPG300N_GPIO_LED_LAN1 13 -#define WHRHPG300N_GPIO_LED_LAN2 14 -#define WHRHPG300N_GPIO_LED_LAN3 15 -#define WHRHPG300N_GPIO_LED_LAN4 16 -#define WHRHPG300N_GPIO_LED_WAN 17 - -#define WHRHPG300N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WHRHPG300N_KEYS_DEBOUNCE_INTERVAL (3 * WHRHPG300N_KEYS_POLL_INTERVAL) - -#define WHRHPG300N_MAC_OFFSET 0x20c - -static struct gpio_led whrhpg300n_leds_gpio[] __initdata = { - { - .name = "buffalo:orange:security", - .gpio = WHRHPG300N_GPIO_LED_SECURITY, - .active_low = 1, - }, { - .name = "buffalo:red:diag", - .gpio = WHRHPG300N_GPIO_LED_DIAG, - .active_low = 1, - }, { - .name = "buffalo:green:router", - .gpio = WHRHPG300N_GPIO_LED_ROUTER, - .active_low = 1, - }, { - .name = "buffalo:green:wan", - .gpio = WHRHPG300N_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "buffalo:green:lan1", - .gpio = WHRHPG300N_GPIO_LED_LAN1, - .active_low = 1, - }, { - .name = "buffalo:green:lan2", - .gpio = WHRHPG300N_GPIO_LED_LAN2, - .active_low = 1, - }, { - .name = "buffalo:green:lan3", - .gpio = WHRHPG300N_GPIO_LED_LAN3, - .active_low = 1, - }, { - .name = "buffalo:green:lan4", - .gpio = WHRHPG300N_GPIO_LED_LAN4, - .active_low = 1, - } -}; - -static struct gpio_keys_button whrhpg300n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, - .gpio = WHRHPG300N_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "aoss/wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .gpio = WHRHPG300N_GPIO_BTN_AOSS, - .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, - .active_low = 1, - }, { - .desc = "router_on", - .type = EV_KEY, - .code = BTN_2, - .gpio = WHRHPG300N_GPIO_BTN_ROUTER_ON, - .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, - .active_low = 1, - }, { - .desc = "router_auto", - .type = EV_KEY, - .code = BTN_3, - .gpio = WHRHPG300N_GPIO_BTN_ROUTER_AUTO, - .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, - .active_low = 1, - } -}; - -static void __init whrhpg300n_setup(void) -{ - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - u8 *mac = (u8 *) KSEG1ADDR(ee + WHRHPG300N_MAC_OFFSET); - - ath79_register_m25p80(NULL); - - ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(whrhpg300n_leds_gpio), - whrhpg300n_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WHRHPG300N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(whrhpg300n_gpio_keys), - whrhpg300n_gpio_keys); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - - ath79_register_mdio(0, 0x0); - - /* LAN ports */ - ath79_register_eth(1); - /* WAN port */ - ath79_register_eth(0); - - ap9x_pci_setup_wmac_led_pin(0, 1); - - ap91_pci_init(ee, mac); -} - -MIPS_MACHINE(ATH79_MACH_WHR_HP_G300N, "WHR-HP-G300N", "Buffalo WHR-HP-G300N", - whrhpg300n_setup); - -MIPS_MACHINE(ATH79_MACH_WHR_G301N, "WHR-G301N", "Buffalo WHR-G301N", - whrhpg300n_setup); - -MIPS_MACHINE(ATH79_MACH_WHR_HP_GN, "WHR-HP-GN", "Buffalo WHR-HP-GN", - whrhpg300n_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wi2a-ac200i.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wi2a-ac200i.c deleted file mode 100644 index 85e0c8fea3..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wi2a-ac200i.c +++ /dev/null @@ -1,217 +0,0 @@ -/* - * Nokia WI2A-AC200i support - * - * Copyright (c) 2012 Qualcomm Atheros - * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2017 Felix Fietkau <nbd@nbd.name> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform/ar934x_nfc.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/fw/fw.h> - -#include "common.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-nfc.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define AC200I_GPIO_BTN_RESET 17 - -#define AC200I_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AC200I_KEYS_DEBOUNCE_INTERVAL (3 * AC200I_KEYS_POLL_INTERVAL) - -#define AC200I_MAC_ADDR 0x1f040249 -#define AC200I_MAC1_OFFSET 6 -#define AC200I_WMAC_CALDATA_ADDR 0x1f061000 - -static struct gpio_led ac200i_leds_gpio[] __initdata = { - { - .name = "nokia:red:wlan-2g", - .gpio = 0, - .active_low = 1, - }, - { - .name = "nokia:green:power", - .gpio = 1, - .active_low = 1, - }, - { - .name = "nokia:green:wlan-2g", - .gpio = 2, - .active_low = 1, - }, - { - .name = "nokia:green:ctrl", - .gpio = 3, - .active_low = 1, - }, - { - .name = "nokia:green:eth", - .gpio = 4, - .active_low = 1, - }, - { - .name = "nokia:red:power", - .gpio = 13, - .active_low = 1, - }, - { - .name = "nokia:red:eth", - .gpio = 14, - .active_low = 1, - }, - { - .name = "nokia:red:wlan-5g", - .gpio = 18, - .active_low = 1, - }, - { - .name = "nokia:green:wlan-5g", - .gpio = 19, - .active_low = 1, - }, - { - .name = "nokia:red:ctrl", - .gpio = 20, - .active_low = 1, - }, -}; - -static struct gpio_keys_button ac200i_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = AC200I_KEYS_DEBOUNCE_INTERVAL, - .gpio = AC200I_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct mtd_partition ac200i_nand_partitions[] = { - { - .name = "cfg", - .offset = 0x0100000, - .size = 0x1800000, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .offset = 0x2000000, - .size = 0x0400000, - }, - { - .name = "ubi", - .offset = 0x2400000, - .size = 0x2000000, - }, - { - .name = "kernel", - .offset = 0x5000000, - .size = 0x0400000, - }, - { - .name = "ubi", - .offset = 0x5400000, - .size = 0x2000000, - }, -}; - -static const char *boot_getenv(const char *key) -{ - const char *start = (const char *) KSEG1ADDR(0x1f070000); - const char *end = start + 0x20000; - const char *addr; - - for (addr = start + 4; - *addr && *addr != 0xff && addr < end && - strnlen(addr, end - addr) < end - addr; - addr += strnlen(addr, end - addr) + 1) { - const char *val; - - val = strchr(addr, '='); - if (!val) - continue; - - if (strncmp(addr, key, val - addr)) - continue; - - return val + 1; - } - return NULL; -} - -static void __init ac200i_setup(void) -{ - const char *img; - u8 *wmac = (u8 *) KSEG1ADDR(AC200I_WMAC_CALDATA_ADDR); - u8 *mac_addr = (u8 *) KSEG1ADDR(AC200I_MAC_ADDR); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ac200i_leds_gpio), - ac200i_leds_gpio); - ath79_register_gpio_keys_polled(-1, AC200I_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ac200i_gpio_keys), - ac200i_gpio_keys); - - ath79_register_usb(); - ath79_nfc_set_parts(ac200i_nand_partitions, - ARRAY_SIZE(ac200i_nand_partitions)); - ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW); - ath79_register_nfc(); - - ath79_register_wmac(wmac, NULL); - - ath79_register_mdio(0, 0x0); - ath79_init_mac(ath79_eth0_data.mac_addr, mac_addr, 0); - - /* GMAC0 is connected to the SGMII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x03000101; - ath79_eth0_pll_data.pll_100 = 0x80000101; - ath79_eth0_pll_data.pll_10 = 0x80001313; - - img = boot_getenv("dualPartition"); - if (img && !strcmp(img, "imgA")) { - ac200i_nand_partitions[3].name = "kernel_alt"; - ac200i_nand_partitions[4].name = "ubi_alt"; - } else { - ac200i_nand_partitions[1].name = "kernel_alt"; - ac200i_nand_partitions[2].name = "ubi_alt"; - } - - ath79_register_eth(0); - - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_WI2A_AC200I, "WI2A-AC200i", - "Nokia WI2A-AC200i", - ac200i_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wifi-pineapple-nano.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wifi-pineapple-nano.c deleted file mode 100644 index 645f367f6c..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wifi-pineapple-nano.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * Hak5 WiFi Pineapple NANO board support - * - * Copyright (C) 2018 Sebastian Kinne <seb@hak5.org> - * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define WIFI_PINEAPPLE_NANO_GPIO_LED_SYSTEM 18 - -#define WIFI_PINEAPPLE_NANO_GPIO_BTN_RESET 12 -#define WIFI_PINEAPPLE_NANO_GPIO_SD_DET 19 -#define WIFI_PINEAPPLE_NANO_GPIO_USB_ALARM 20 -#define WIFI_PINEAPPLE_NANO_GPIO_USB_POWER 23 - -#define HAK5_KEYS_POLL_INTERVAL 20 /* msecs */ -#define HAK5_KEYS_DEBOUNCE_INTERVAL (3 * HAK5_KEYS_POLL_INTERVAL) - -#define WIFI_PINEAPPLE_NANO_MAC1_OFFSET 0x0006 -#define WIFI_PINEAPPLE_NANO_CALDATA_OFFSET 0x1000 - -static const char *hak5_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data hak5_flash_data = { - .part_probes = hak5_part_probes, -}; - -static struct gpio_led wifi_pineapple_nano_leds_gpio[] __initdata = { - { - .name = "wifi-pineapple-nano:blue:system", - .gpio = WIFI_PINEAPPLE_NANO_GPIO_LED_SYSTEM, - .active_low = 1, - }, -}; - -static struct gpio_keys_button wifi_pineapple_nano_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL, - .gpio = WIFI_PINEAPPLE_NANO_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init wifi_pineapple_nano_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(&hak5_flash_data); - - ath79_setup_ar933x_phy4_switch(false, false); - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, - art + WIFI_PINEAPPLE_NANO_MAC1_OFFSET, 0); - ath79_register_eth(0); - - /* GPIO11/12 */ - ath79_gpio_function_disable(AR933X_GPIO_FUNC_UART_RTS_CTS_EN); - - gpio_request_one(WIFI_PINEAPPLE_NANO_GPIO_SD_DET, - GPIOF_IN | GPIOF_EXPORT_DIR_FIXED | GPIOF_ACTIVE_LOW, - "SD card present"); - - gpio_request_one(WIFI_PINEAPPLE_NANO_GPIO_USB_ALARM, - GPIOF_IN | GPIOF_EXPORT_DIR_FIXED | GPIOF_ACTIVE_LOW, - "USB alarm"); - - gpio_request_one(WIFI_PINEAPPLE_NANO_GPIO_USB_POWER, - GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED | - GPIOF_ACTIVE_LOW, "USB power"); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wifi_pineapple_nano_leds_gpio), - wifi_pineapple_nano_leds_gpio); - - ath79_register_gpio_keys_polled(-1, HAK5_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wifi_pineapple_nano_gpio_keys), - wifi_pineapple_nano_gpio_keys); - - ath79_register_usb(); - ath79_register_wmac(art + WIFI_PINEAPPLE_NANO_CALDATA_OFFSET, NULL); -} - -MIPS_MACHINE(ATH79_MACH_WIFI_PINEAPPLE_NANO, "WIFI-PINEAPPLE-NANO", - "Hak5 WiFi Pineapple NANO", wifi_pineapple_nano_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c deleted file mode 100644 index 11006fd1bc..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * Buffalo WLAE-AG300N board support - */ - -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define WLAEAG300N_MAC_OFFSET 0x20c -#define WLAEAG300N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WLAEAG300N_KEYS_DEBOUNCE_INTERVAL (3 * WLAEAG300N_KEYS_POLL_INTERVAL) - - -static struct gpio_led wlaeag300n_leds_gpio[] __initdata = { - /* - * Note: Writing 1 into GPIO 13 will power down the device. - */ - { - .name = "buffalo:green:wireless", - .gpio = 14, - .active_low = 1, - }, { - .name = "buffalo:red:wireless", - .gpio = 15, - .active_low = 1, - }, { - .name = "buffalo:green:status", - .gpio = 16, - .active_low = 1, - }, { - .name = "buffalo:red:status", - .gpio = 17, - .active_low = 1, - } -}; - - -static struct gpio_keys_button wlaeag300n_gpio_keys[] __initdata = { - { - .desc = "function", - .type = EV_KEY, - .code = KEY_MODE, - .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL, - .gpio = 0, - .active_low = 1, - }, { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL, - .gpio = 1, - .active_low = 1, - }, { - .desc = "power", - .type = EV_KEY, - .code = KEY_POWER, - .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL, - .gpio = 11, - .active_low = 1, - }, { - .desc = "aoss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL, - .gpio = 12, - .active_low = 1, - } -}; - -static void __init wlaeag300n_setup(void) -{ - u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1fff1000); - u8 *mac1 = eeprom1 + WLAEAG300N_MAC_OFFSET; - - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 1); - - ath79_register_mdio(0, ~(BIT(0) | BIT(4))); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = BIT(4); - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wlaeag300n_leds_gpio), - wlaeag300n_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WLAEAG300N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wlaeag300n_gpio_keys), - wlaeag300n_gpio_keys); - - ath79_register_m25p80(NULL); - - ap91_pci_init(eeprom1, mac1); -} - -MIPS_MACHINE(ATH79_MACH_WLAE_AG300N, "WLAE-AG300N", - "Buffalo WLAE-AG300N", wlaeag300n_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c deleted file mode 100644 index 04b12fc7cc..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c +++ /dev/null @@ -1,195 +0,0 @@ -/* - * Sitecom X8 AC1750 WLR-8100 board support - * - * Based on the Qualcomm Atheros AP135/AP136 reference board support code - * Copyright (c) 2012 Qualcomm Atheros - * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define WLR8100_GPIO_LED_USB 4 -#define WLR8100_GPIO_LED_WLAN_5G 12 -#define WLR8100_GPIO_LED_WLAN_2G 13 -#define WLR8100_GPIO_LED_STATUS_RED 14 -#define WLR8100_GPIO_LED_WPS_RED 15 -#define WLR8100_GPIO_LED_STATUS_AMBER 19 -#define WLR8100_GPIO_LED_WPS_GREEN 20 - -#define WLR8100_GPIO_BTN_WPS 16 -#define WLR8100_GPIO_BTN_RFKILL 21 - -#define WLR8100_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WLR8100_KEYS_DEBOUNCE_INTERVAL (3 * WLR8100_KEYS_POLL_INTERVAL) - -static struct gpio_led wlr8100_leds_gpio[] __initdata = { - { - .name = "wlr8100:amber:status", - .gpio = WLR8100_GPIO_LED_STATUS_AMBER, - .active_low = 1, - }, - { - .name = "wlr8100:red:status", - .gpio = WLR8100_GPIO_LED_STATUS_RED, - .active_low = 1, - }, - { - .name = "wlr8100:green:wps", - .gpio = WLR8100_GPIO_LED_WPS_GREEN, - .active_low = 1, - }, - { - .name = "wlr8100:red:wps", - .gpio = WLR8100_GPIO_LED_WPS_RED, - .active_low = 1, - }, - { - .name = "wlr8100:red:wlan-2g", - .gpio = WLR8100_GPIO_LED_WLAN_2G, - .active_low = 1, - }, - { - .name = "wlr8100:red:usb", - .gpio = WLR8100_GPIO_LED_USB, - .active_low = 1, - } -}; - -static struct gpio_keys_button wlr8100_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WLR8100_KEYS_DEBOUNCE_INTERVAL, - .gpio = WLR8100_GPIO_BTN_WPS, - .active_low = 1, - }, - { - .desc = "RFKILL button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = WLR8100_KEYS_DEBOUNCE_INTERVAL, - .gpio = WLR8100_GPIO_BTN_RFKILL, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg wlr8100_ar8327_pad0_cfg; -static struct ar8327_pad_cfg wlr8100_ar8327_pad6_cfg; - -static struct ar8327_platform_data wlr8100_ar8327_data = { - .pad0_cfg = &wlr8100_ar8327_pad0_cfg, - .pad6_cfg = &wlr8100_ar8327_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .port6_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info wlr8100_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &wlr8100_ar8327_data, - }, -}; - -static void __init wlr8100_common_setup(void) -{ - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wlr8100_leds_gpio), - wlr8100_leds_gpio); - ath79_register_gpio_keys_polled(-1, WLR8100_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wlr8100_gpio_keys), - wlr8100_gpio_keys); - - ath79_register_usb(); - - ath79_register_wmac_simple(); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - ath79_register_mdio(0, 0x0); - - mdiobus_register_board_info(wlr8100_mdio0_info, - ARRAY_SIZE(wlr8100_mdio0_info)); - - /* GMAC0 is connected to the RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - - ath79_register_eth(0); - - /* GMAC1 is connected tot eh SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - - ath79_register_eth(1); -} - -static void __init wlr8100_010_setup(void) -{ - /* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */ - wlr8100_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII; - wlr8100_ar8327_pad0_cfg.txclk_delay_en = true; - wlr8100_ar8327_pad0_cfg.rxclk_delay_en = true; - wlr8100_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; - wlr8100_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; - - /* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */ - wlr8100_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII; - wlr8100_ar8327_pad6_cfg.rxclk_delay_en = true; - wlr8100_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0; - - ath79_eth0_pll_data.pll_1000 = 0xa6000000; - ath79_eth1_pll_data.pll_1000 = 0x03000101; - - wlr8100_common_setup(); - ap91_pci_init_simple(); -} - -MIPS_MACHINE(ATH79_MACH_WLR8100, "WLR8100", - "Sitecom WLR-8100", - wlr8100_010_setup); - diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wndap360.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wndap360.c deleted file mode 100644 index eae1c383ee..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wndap360.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Netgear WNDAP360 board support (proper leds / button support missing) - * - * Based on AP96 - * Copyright (C) 2013 Jacek Kikiewicz - * Copyright (C) 2009 Marco Porsch - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2010 Atheros Communications - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/delay.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -#define WNDAP360_GPIO_LED_POWER_ORANGE 0 -#define WNDAP360_GPIO_LED_POWER_GREEN 2 - -/* Reset button - next to the power connector */ -#define WNDAP360_GPIO_BTN_RESET 8 - -#define WNDAP360_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WNDAP360_KEYS_DEBOUNCE_INTERVAL (3 * WNDAP360_KEYS_POLL_INTERVAL) - -#define WNDAP360_WMAC0_MAC_OFFSET 0x120c -#define WNDAP360_WMAC1_MAC_OFFSET 0x520c -#define WNDAP360_CALDATA0_OFFSET 0x1000 -#define WNDAP360_CALDATA1_OFFSET 0x5000 - -/* - * WNDAP360 this still uses leds definitions from AP96 - * - */ -static struct gpio_led wndap360_leds_gpio[] __initdata = { - { - .name = "netgear:green:power", - .gpio = WNDAP360_GPIO_LED_POWER_GREEN, - .active_low = 1, - }, { - .name = "netgear:orange:power", - .gpio = WNDAP360_GPIO_LED_POWER_ORANGE, - .active_low = 1, - } -}; - -static struct gpio_keys_button wndap360_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WNDAP360_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNDAP360_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -#define WNDAP360_LAN_PHYMASK 0x0f - -static void __init wndap360_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_mdio(0, ~(WNDAP360_LAN_PHYMASK)); - - /* Reusing wifi MAC with offset of 1 as eth0 MAC */ - ath79_init_mac(ath79_eth0_data.mac_addr, - art + WNDAP360_WMAC0_MAC_OFFSET, 1); - ath79_eth0_pll_data.pll_1000 = 0x11110000; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = WNDAP360_LAN_PHYMASK; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_register_eth(0); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wndap360_leds_gpio), - wndap360_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WNDAP360_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wndap360_gpio_keys), - wndap360_gpio_keys); - - ap9x_pci_setup_wmac_led_pin(0, 5); - ap9x_pci_setup_wmac_led_pin(1, 5); - - ap94_pci_init(art + WNDAP360_CALDATA0_OFFSET, - art + WNDAP360_WMAC0_MAC_OFFSET, - art + WNDAP360_CALDATA1_OFFSET, - art + WNDAP360_WMAC1_MAC_OFFSET); -} - -MIPS_MACHINE(ATH79_MACH_WNDAP360, "WNDAP360", "NETGEAR WNDAP360", wndap360_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wndr3700.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wndr3700.c deleted file mode 100644 index b9132fc363..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wndr3700.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Netgear WNDR3700 board support - * - * Copyright (C) 2009 Marco Porsch - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/delay.h> -#include <linux/rtl8366.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define WNDR3700_GPIO_LED_WPS_ORANGE 0 -#define WNDR3700_GPIO_LED_POWER_ORANGE 1 -#define WNDR3700_GPIO_LED_POWER_GREEN 2 -#define WNDR3700_GPIO_LED_WPS_GREEN 4 -#define WNDR3700_GPIO_LED_WAN_GREEN 6 - -#define WNDR3700_GPIO_BTN_WPS 3 -#define WNDR3700_GPIO_BTN_RESET 8 -#define WNDR3700_GPIO_BTN_RFKILL 11 - -#define WNDR3700_GPIO_RTL8366_SDA 5 -#define WNDR3700_GPIO_RTL8366_SCK 7 - -#define WNDR3700_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WNDR3700_KEYS_DEBOUNCE_INTERVAL (3 * WNDR3700_KEYS_POLL_INTERVAL) - -#define WNDR3700_ETH0_MAC_OFFSET 0 -#define WNDR3700_ETH1_MAC_OFFSET 0x6 - -#define WNDR3700_WMAC0_MAC_OFFSET 0 -#define WNDR3700_WMAC1_MAC_OFFSET 0xc -#define WNDR3700_CALDATA0_OFFSET 0x1000 -#define WNDR3700_CALDATA1_OFFSET 0x5000 - -static struct gpio_led wndr3700_leds_gpio[] __initdata = { - { - .name = "netgear:green:power", - .gpio = WNDR3700_GPIO_LED_POWER_GREEN, - .active_low = 1, - }, { - .name = "netgear:orange:power", - .gpio = WNDR3700_GPIO_LED_POWER_ORANGE, - .active_low = 1, - }, { - .name = "netgear:green:wps", - .gpio = WNDR3700_GPIO_LED_WPS_GREEN, - .active_low = 1, - }, { - .name = "netgear:orange:wps", - .gpio = WNDR3700_GPIO_LED_WPS_ORANGE, - .active_low = 1, - }, { - .name = "netgear:green:wan", - .gpio = WNDR3700_GPIO_LED_WAN_GREEN, - .active_low = 1, - } -}; - -static struct gpio_keys_button wndr3700_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNDR3700_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNDR3700_GPIO_BTN_WPS, - .active_low = 1, - }, { - .desc = "rfkill", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNDR3700_GPIO_BTN_RFKILL, - .active_low = 1, - } -}; - -static struct rtl8366_platform_data wndr3700_rtl8366s_data = { - .gpio_sda = WNDR3700_GPIO_RTL8366_SDA, - .gpio_sck = WNDR3700_GPIO_RTL8366_SCK, -}; - -static struct platform_device wndr3700_rtl8366s_device = { - .name = RTL8366S_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &wndr3700_rtl8366s_data, - } -}; - -static void __init wndr3700_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - /* - * The eth0 and wmac0 interfaces share the same MAC address which - * can lead to problems if operated unbridged. Set the locally - * administered bit on the eth0 MAC to make it unique. - */ - ath79_init_local_mac(ath79_eth0_data.mac_addr, - art + WNDR3700_ETH0_MAC_OFFSET); - ath79_eth0_pll_data.pll_1000 = 0x11110000; - ath79_eth0_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_init_mac(ath79_eth1_data.mac_addr, - art + WNDR3700_ETH1_MAC_OFFSET, 0); - ath79_eth1_pll_data.pll_1000 = 0x11110000; - ath79_eth1_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = 0x10; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_usb(); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio), - wndr3700_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WNDR3700_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wndr3700_gpio_keys), - wndr3700_gpio_keys); - - platform_device_register(&wndr3700_rtl8366s_device); - platform_device_register_simple("wndr3700-led-usb", -1, NULL, 0); - - ap9x_pci_setup_wmac_led_pin(0, 5); - ap9x_pci_setup_wmac_led_pin(1, 5); - - /* 2.4 GHz uses the first fixed antenna group (1, 0, 1, 0) */ - ap9x_pci_setup_wmac_gpio(0, (0xf << 6), (0xa << 6)); - - /* 5 GHz uses the second fixed antenna group (0, 1, 1, 0) */ - ap9x_pci_setup_wmac_gpio(1, (0xf << 6), (0x6 << 6)); - - ap94_pci_init(art + WNDR3700_CALDATA0_OFFSET, - art + WNDR3700_WMAC0_MAC_OFFSET, - art + WNDR3700_CALDATA1_OFFSET, - art + WNDR3700_WMAC1_MAC_OFFSET); -} - -MIPS_MACHINE(ATH79_MACH_WNDR3700, "WNDR3700", - "NETGEAR WNDR3700/WNDR3800/WNDRMAC", - wndr3700_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wndr4300.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wndr4300.c deleted file mode 100644 index 339216da1b..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wndr4300.c +++ /dev/null @@ -1,215 +0,0 @@ -/* - * NETGEAR WNDR3700v4/WNDR4300 board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2014 Ralph Perlich <rpsoft@arcor.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/version.h> -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> -#include <linux/mtd/mtd.h> -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0) -#include <linux/mtd/nand.h> -#else -#include <linux/mtd/rawnand.h> -#endif -#include <linux/platform/ar934x_nfc.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-nfc.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -/* AR9344 GPIOs */ -#define WNDR4300_GPIO_LED_POWER_GREEN 0 -#define WNDR4300_GPIO_LED_POWER_AMBER 2 -#define WNDR4300_GPIO_LED_USB 13 -#define WNDR4300_GPIO_LED_WAN_GREEN 1 -#define WNDR4300_GPIO_LED_WAN_AMBER 3 -#define WNDR4300_GPIO_LED_WLAN2G 11 -#define WNDR4300_GPIO_LED_WLAN5G 14 -#define WNDR4300_GPIO_LED_WPS_GREEN 16 -#define WNDR4300_GPIO_LED_WPS_AMBER 17 - -#define WNDR4300_GPIO_BTN_RESET 21 -#define WNDR4300_GPIO_BTN_WIRELESS 15 -#define WNDR4300_GPIO_BTN_WPS 12 - -/* AR9580 GPIOs */ -#define WNDR4300_GPIO_USB_5V 0 - -#define WNDR4300_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WNDR4300_KEYS_DEBOUNCE_INTERVAL (3 * WNDR4300_KEYS_POLL_INTERVAL) - -static struct gpio_led wndr4300_leds_gpio[] __initdata = { - { - .name = "netgear:green:power", - .gpio = WNDR4300_GPIO_LED_POWER_GREEN, - .active_low = 1, - }, - { - .name = "netgear:amber:power", - .gpio = WNDR4300_GPIO_LED_POWER_AMBER, - .active_low = 1, - }, - { - .name = "netgear:green:wan", - .gpio = WNDR4300_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, - { - .name = "netgear:amber:wan", - .gpio = WNDR4300_GPIO_LED_WAN_AMBER, - .active_low = 1, - }, - { - .name = "netgear:green:usb", - .gpio = WNDR4300_GPIO_LED_USB, - .active_low = 1, - }, - { - .name = "netgear:green:wps", - .gpio = WNDR4300_GPIO_LED_WPS_GREEN, - .active_low = 1, - }, - { - .name = "netgear:amber:wps", - .gpio = WNDR4300_GPIO_LED_WPS_AMBER, - .active_low = 1, - }, - { - .name = "netgear:green:wlan2g", - .gpio = WNDR4300_GPIO_LED_WLAN2G, - .active_low = 1, - }, - { - .name = "netgear:blue:wlan5g", - .gpio = WNDR4300_GPIO_LED_WLAN5G, - .active_low = 1, - }, -}; - -static struct gpio_keys_button wndr4300_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WNDR4300_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNDR4300_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WNDR4300_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNDR4300_GPIO_BTN_WPS, - .active_low = 1, - }, - { - .desc = "rfkill", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = WNDR4300_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNDR4300_GPIO_BTN_WIRELESS, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg wndr4300_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_led_cfg wndr4300_ar8327_led_cfg = { - .led_ctrl0 = 0xcc35cc35, - .led_ctrl1 = 0xcb37cb37, - .led_ctrl2 = 0x00000000, - .led_ctrl3 = 0x00f3cf00, - .open_drain = true, -}; - -static struct ar8327_platform_data wndr4300_ar8327_data = { - .pad0_cfg = &wndr4300_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &wndr4300_ar8327_led_cfg, -}; - -static struct mdio_board_info wndr4300_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &wndr4300_ar8327_data, - }, -}; - -static void __init wndr4300_setup(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(wndr4300_leds_gpio); i++) - ath79_gpio_output_select(wndr4300_leds_gpio[i].gpio, - AR934X_GPIO_OUT_GPIO); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wndr4300_leds_gpio), - wndr4300_leds_gpio); - ath79_register_gpio_keys_polled(-1, WNDR4300_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wndr4300_gpio_keys), - wndr4300_gpio_keys); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); - - mdiobus_register_board_info(wndr4300_mdio0_info, - ARRAY_SIZE(wndr4300_mdio0_info)); - - ath79_register_mdio(0, 0x0); - - /* GMAC0 is connected to an AR8327N switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_register_eth(0); - - ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW); - ath79_register_nfc(); - ath79_register_usb(); - - ath79_register_wmac_simple(); - - /* enable power for the USB port */ - ap9x_pci_setup_wmac_gpio(0, BIT(WNDR4300_GPIO_USB_5V), - BIT(WNDR4300_GPIO_USB_5V)); - - ap91_pci_init_simple(); -} - -MIPS_MACHINE(ATH79_MACH_WNDR3700_V4, "WNDR3700_V4", "NETGEAR WNDR3700v4", - wndr4300_setup); -MIPS_MACHINE(ATH79_MACH_WNDR4300, "WNDR4300", "NETGEAR WNDR4300", - wndr4300_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c deleted file mode 100644 index 76c9cb99c9..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c +++ /dev/null @@ -1,637 +0,0 @@ -/* - * NETGEAR WNR2000v3/WNR612v2/WNR1000v2/WPN824N board support - * - * Copyright (C) 2015 Hartmut Knaack <knaack.h@gmx.de> - * Copyright (C) 2013 Mathieu Olivari <mathieu.olivari@gmail.com> - * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/kernel.h> /* for max() macro */ -#include <linux/platform_device.h> /* PLATFORM_DEVID_AUTO is defined here */ - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> /* needed to disable switch LEDs */ -#include "common.h" /* needed to disable switch LEDs */ - -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -/* WNR2000v3 - connected through AR7241 */ -#define WNR2000V3_GPIO_LED_WAN_GREEN 0 -#define WNR2000V3_GPIO_LED_LAN1_AMBER 1 -#define WNR2000V3_GPIO_LED_LAN2_AMBER 6 -#define WNR2000V3_GPIO_LED_WPS_GREEN 7 -#define WNR2000V3_GPIO_LED_LAN3_AMBER 8 -#define WNR2000V3_GPIO_BTN_WPS 11 -#define WNR2000V3_GPIO_LED_LAN4_AMBER 12 -#define WNR2000V3_GPIO_LED_LAN1_GREEN 13 -#define WNR2000V3_GPIO_LED_LAN2_GREEN 14 -#define WNR2000V3_GPIO_LED_LAN3_GREEN 15 -#define WNR2000V3_GPIO_LED_LAN4_GREEN 16 -#define WNR2000V3_GPIO_LED_WAN_AMBER 17 - -/* WNR2000v3 - connected through AR9287 */ -#define WNR2000V3_GPIO_WMAC_LED_WLAN_BLUE 1 -#define WNR2000V3_GPIO_WMAC_LED_TEST_AMBER 2 -#define WNR2000V3_GPIO_WMAC_LED_POWER_GREEN 3 -#define WNR2000V3_GPIO_WMAC_BTN_RESET 8 -#define WNR2000V3_GPIO_WMAC_BTN_RFKILL 9 - -/* WNR612v2 - connected through AR7241 */ -#define WNR612V2_GPIO_LED_POWER_GREEN 11 -#define WNR612V2_GPIO_LED_LAN1_GREEN 13 -#define WNR612V2_GPIO_LED_LAN2_GREEN 14 -#define WNR612V2_GPIO_LED_WAN_GREEN 17 - -/* WNR612v2 - connected through AR9285 */ -#define WNR612V2_GPIO_WMAC_LED_WLAN_GREEN 1 -#define WNR612V2_GPIO_WMAC_BTN_RESET 7 - -/* WNR1000v2 - connected through AR7240 */ -#define WNR1000V2_GPIO_LED_WAN_AMBER 0 -#define WNR1000V2_GPIO_LED_TEST_AMBER 1 -#define WNR1000V2_GPIO_LED_LAN1_AMBER 6 /* AR724X_GPIO_FUNC_JTAG_DISABLE */ -#define WNR1000V2_GPIO_LED_LAN2_AMBER 7 /* AR724X_GPIO_FUNC_JTAG_DISABLE */ -#define WNR1000V2_GPIO_LED_LAN3_AMBER 8 /* AR724X_GPIO_FUNC_JTAG_DISABLE */ -#define WNR1000V2_GPIO_LED_POWER_GREEN 11 -#define WNR1000V2_GPIO_LED_LAN4_AMBER 12 -#define WNR1000V2_GPIO_LED_LAN1_GREEN 13 /* AR724X_..._ETH_SWITCH_LED0 */ -#define WNR1000V2_GPIO_LED_LAN2_GREEN 14 /* AR724X_..._ETH_SWITCH_LED1 */ -#define WNR1000V2_GPIO_LED_LAN3_GREEN 15 /* AR724X_..._ETH_SWITCH_LED2 */ -#define WNR1000V2_GPIO_LED_LAN4_GREEN 16 /* AR724X_..._ETH_SWITCH_LED3 */ -#define WNR1000V2_GPIO_LED_WAN_GREEN 17 /* AR724X_..._ETH_SWITCH_LED4 */ - -/* WNR1000v2 - connected through AR9285 */ -#define WNR1000V2_GPIO_WMAC_LED_WLAN_BLUE 1 -#define WNR1000V2_GPIO_WMAC_LED_WPS_GREEN 5 -#define WNR1000V2_GPIO_WMAC_BTN_WPS 6 -#define WNR1000V2_GPIO_WMAC_BTN_RESET 7 -#define WNR1000V2_GPIO_WMAC_BTN_RFKILL 8 - -/* WPN824N - connected through AR7240 */ -#define WPN824N_GPIO_LED_WAN_AMBER 0 -#define WPN824N_GPIO_LED_STATUS_AMBER 1 -#define WPN824N_GPIO_LED_LAN1_AMBER 6 /* AR724X_GPIO_FUNC_JTAG_DISABLE */ -#define WPN824N_GPIO_LED_LAN2_AMBER 7 /* AR724X_GPIO_FUNC_JTAG_DISABLE */ -#define WPN824N_GPIO_LED_LAN3_AMBER 8 /* AR724X_GPIO_FUNC_JTAG_DISABLE */ -#define WPN824N_GPIO_LED_LAN4_AMBER 12 -#define WPN824N_GPIO_LED_LAN1_GREEN 13 -#define WPN824N_GPIO_LED_LAN2_GREEN 14 -#define WPN824N_GPIO_LED_LAN3_GREEN 15 /* AR724X_GPIO_FUNC_CLK_OBS3_EN */ -#define WPN824N_GPIO_LED_LAN4_GREEN 16 -#define WPN824N_GPIO_LED_WAN_GREEN 17 - -/* WPN824N - connected through AR9285 */ -#define WPN824N_WGPIO_LED_PWR_GREEN 0 -#define WPN824N_WGPIO_LED_WLAN_BLUE 1 -#define WPN824N_WGPIO_LED_WPS1_BLUE 5 -#define WPN824N_WGPIO_LED_WPS2_BLUE 9 -#define WPN824N_WGPIO_LED_TEST_AMBER 10 -#define WPN824N_WGPIO_BTN_WPS 6 -#define WPN824N_WGPIO_BTN_RESET 7 -#define WPN824N_WGPIO_BTN_WLAN 8 - -#define WNR2000V3_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WNR2000V3_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000V3_KEYS_POLL_INTERVAL) - -/* ART offsets for: WNR2000v3, WNR612v2, WNR1000v2 */ -#define WNR2000V3_MAC0_OFFSET 0 -#define WNR2000V3_MAC1_OFFSET 6 -#define WNR2000V3_PCIE_CALDATA_OFFSET 0x1000 -#define WNR2000V3_WMAC_OFFSET 0x108c /* wireless MAC is inside ART */ - -static struct gpio_led wnr2000v3_leds_gpio[] __initdata = { - { - .name = "netgear:green:wan", - .gpio = WNR2000V3_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, { - .name = "netgear:amber:lan1", - .gpio = WNR2000V3_GPIO_LED_LAN1_AMBER, - .active_low = 1, - }, { - .name = "netgear:amber:lan2", - .gpio = WNR2000V3_GPIO_LED_LAN2_AMBER, - .active_low = 1, - }, { - .name = "netgear:amber:lan3", - .gpio = WNR2000V3_GPIO_LED_LAN3_AMBER, - .active_low = 1, - }, { - .name = "netgear:amber:lan4", - .gpio = WNR2000V3_GPIO_LED_LAN4_AMBER, - .active_low = 1, - }, { - .name = "netgear:green:wps", - .gpio = WNR2000V3_GPIO_LED_WPS_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:lan1", - .gpio = WNR2000V3_GPIO_LED_LAN1_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:lan2", - .gpio = WNR2000V3_GPIO_LED_LAN2_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:lan3", - .gpio = WNR2000V3_GPIO_LED_LAN3_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:lan4", - .gpio = WNR2000V3_GPIO_LED_LAN4_GREEN, - .active_low = 1, - }, { - .name = "netgear:amber:wan", - .gpio = WNR2000V3_GPIO_LED_WAN_AMBER, - .active_low = 1, - } -}; - -static struct gpio_led wnr2000v3_wmac_leds_gpio[] = { - { - .name = "netgear:green:power", - .gpio = WNR2000V3_GPIO_WMAC_LED_POWER_GREEN, - .active_low = 1, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, { - .name = "netgear:amber:test", - .gpio = WNR2000V3_GPIO_WMAC_LED_TEST_AMBER, - .active_low = 1, - }, { - .name = "netgear:blue:wlan", - .gpio = WNR2000V3_GPIO_WMAC_LED_WLAN_BLUE, - .active_low = 1, - } -}; - -static struct gpio_led wnr612v2_leds_gpio[] __initdata = { - { - .name = "netgear:green:power", - .gpio = WNR612V2_GPIO_LED_POWER_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:lan1", - .gpio = WNR612V2_GPIO_LED_LAN1_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:lan2", - .gpio = WNR612V2_GPIO_LED_LAN2_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:wan", - .gpio = WNR612V2_GPIO_LED_WAN_GREEN, - .active_low = 1, - } -}; - -static struct gpio_led wnr612v2_wmac_leds_gpio[] = { - { - .name = "netgear:green:wlan", - .gpio = WNR612V2_GPIO_WMAC_LED_WLAN_GREEN, - .active_low = 1, - } -}; - -static struct gpio_led wnr1000v2_leds_gpio[] __initdata = { - { - .name = "netgear:amber:lan1", - .gpio = WNR1000V2_GPIO_LED_LAN1_AMBER, - .active_low = 1, - }, { - .name = "netgear:amber:lan2", - .gpio = WNR1000V2_GPIO_LED_LAN2_AMBER, - .active_low = 1, - }, { - .name = "netgear:amber:lan3", - .gpio = WNR1000V2_GPIO_LED_LAN3_AMBER, - .active_low = 1, - }, { - .name = "netgear:amber:lan4", - .gpio = WNR1000V2_GPIO_LED_LAN4_AMBER, - .active_low = 1, - }, { - .name = "netgear:amber:test", - .gpio = WNR1000V2_GPIO_LED_TEST_AMBER, - .active_low = 1, - }, { - .name = "netgear:amber:wan", - .gpio = WNR1000V2_GPIO_LED_WAN_AMBER, - .active_low = 1, - }, { - .name = "netgear:green:lan1", - .gpio = WNR1000V2_GPIO_LED_LAN1_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:lan2", - .gpio = WNR1000V2_GPIO_LED_LAN2_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:lan3", - .gpio = WNR1000V2_GPIO_LED_LAN3_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:lan4", - .gpio = WNR1000V2_GPIO_LED_LAN4_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:power", - .gpio = WNR1000V2_GPIO_LED_POWER_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:wan", - .gpio = WNR1000V2_GPIO_LED_WAN_GREEN, - .active_low = 1, - } -}; - -static struct gpio_led wnr1000v2_wmac_leds_gpio[] = { - { - .name = "netgear:green:wps", - .gpio = WNR1000V2_GPIO_WMAC_LED_WPS_GREEN, - .active_low = 1, - }, { - .name = "netgear:blue:wlan", - .gpio = WNR1000V2_GPIO_WMAC_LED_WLAN_BLUE, - .active_low = 1, - } -}; - -static struct gpio_led wpn824n_leds_gpio[] __initdata = { - { - .name = "netgear:amber:wan", - .gpio = WPN824N_GPIO_LED_WAN_AMBER, - .active_low = 1, - }, { - .name = "netgear:amber:status", - .gpio = WPN824N_GPIO_LED_STATUS_AMBER, - .active_low = 1, - }, { - .name = "netgear:amber:lan1", - .gpio = WPN824N_GPIO_LED_LAN1_AMBER, - .active_low = 1, - }, { - .name = "netgear:amber:lan2", - .gpio = WPN824N_GPIO_LED_LAN2_AMBER, - .active_low = 1, - }, { - .name = "netgear:amber:lan3", - .gpio = WPN824N_GPIO_LED_LAN3_AMBER, - .active_low = 1, - }, { - .name = "netgear:amber:lan4", - .gpio = WPN824N_GPIO_LED_LAN4_AMBER, - .active_low = 1, - }, { - .name = "netgear:green:lan1", - .gpio = WPN824N_GPIO_LED_LAN1_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:lan2", - .gpio = WPN824N_GPIO_LED_LAN2_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:lan3", - .gpio = WPN824N_GPIO_LED_LAN3_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:lan4", - .gpio = WPN824N_GPIO_LED_LAN4_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:wan", - .gpio = WPN824N_GPIO_LED_WAN_GREEN, - .active_low = 1, - } -}; - -static struct gpio_led wpn824n_wmac_leds_gpio[] = { - { - .name = "netgear:green:power", - .gpio = WPN824N_WGPIO_LED_PWR_GREEN, - .active_low = 1, - }, { - .name = "netgear:blue:wps1", - .gpio = WPN824N_WGPIO_LED_WPS1_BLUE, - .active_low = 1, - }, { - .name = "netgear:blue:wps2", - .gpio = WPN824N_WGPIO_LED_WPS2_BLUE, - .active_low = 1, - }, { - .name = "netgear:amber:test", - .gpio = WPN824N_WGPIO_LED_TEST_AMBER, - .active_low = 1, - }, { - .name = "netgear:blue:wlan", - .gpio = WPN824N_WGPIO_LED_WLAN_BLUE, - .active_low = 1, - } -}; - -static struct gpio_keys_button wnr2000v3_keys_gpio[] __initdata = { - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNR2000V3_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button wnr2000v3_wmac_keys_gpio[] = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNR2000V3_GPIO_WMAC_BTN_RESET, - .active_low = 1, - }, { - .desc = "rfkill", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNR2000V3_GPIO_WMAC_BTN_RFKILL, - .active_low = 1, - } -}; - -static struct gpio_keys_button wnr612v2_wmac_keys_gpio[] = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNR612V2_GPIO_WMAC_BTN_RESET, - .active_low = 1, - } -}; - -static struct gpio_keys_button wnr1000v2_wmac_keys_gpio[] = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNR1000V2_GPIO_WMAC_BTN_RESET, - .active_low = 1, - }, { - .desc = "rfkill", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNR1000V2_GPIO_WMAC_BTN_RFKILL, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNR1000V2_GPIO_WMAC_BTN_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button wpn824n_wmac_keys_gpio[] = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL, - .gpio = WPN824N_WGPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "rfkill", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL, - .gpio = WPN824N_WGPIO_BTN_WLAN, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL, - .gpio = WPN824N_WGPIO_BTN_WPS, - .active_low = 1, - } -}; - -/* - * For WNR2000v3 ART flash area used for WLAN MAC is usually empty (0xff) - * so ath9k driver uses random MAC instead each time module is loaded. - * To fix that, assign permanent WLAN MAC equal to ethN's MAC plus 1, - * so network interfaces get sequential addresses. - * If ART wireless MAC address field has been filled by user, use it. - */ -static void __init wnr_get_wmac(u8 *wmac_gen_addr, int mac0_art_offset, - int mac1_art_offset, int wmac_art_offset) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *eth0_mac_addr = (u8 *) (art + mac0_art_offset); - u8 *eth1_mac_addr = (u8 *) (art + mac1_art_offset); - u8 *wlan_mac_addr = (u8 *) (art + wmac_art_offset); - - /* only 0xff if all bits are set - address is invalid, empty area */ - if ((wlan_mac_addr[0] & wlan_mac_addr[1] & wlan_mac_addr[2] & - wlan_mac_addr[3] & wlan_mac_addr[4] & wlan_mac_addr[5]) == 0xff) { - memcpy(wmac_gen_addr, eth0_mac_addr, 5); - wmac_gen_addr[5] = max(eth0_mac_addr[5], eth1_mac_addr[5]) + 1; - - /* Avoid potential conflict in case max(0xff,0x00)+1==0x00 */ - if (!wmac_gen_addr[5]) - wmac_gen_addr[5] = 1; - } else - memcpy(wmac_gen_addr, wlan_mac_addr, 6); -} - -static void __init wnr_common_setup(u8 *wmac_addr) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, art+WNR2000V3_MAC0_OFFSET, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_init_mac(ath79_eth1_data.mac_addr, art+WNR2000V3_MAC1_OFFSET, 0); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = 0x10; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(NULL); - ap91_pci_init(art + WNR2000V3_PCIE_CALDATA_OFFSET, wmac_addr); -} - -static void __init wnr2000v3_setup(void) -{ - u8 wlan_mac_addr[6]; - - /* - * Disable JTAG to use all AR724X GPIO LEDs. - * Also disable CLKs and bit 20 as u-boot does. - * Finally, allow OS to control all link LEDs. - */ - ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE | - AR724X_GPIO_FUNC_UART_EN, - AR724X_GPIO_FUNC_CLK_OBS1_EN | - AR724X_GPIO_FUNC_CLK_OBS2_EN | - AR724X_GPIO_FUNC_CLK_OBS3_EN | - AR724X_GPIO_FUNC_CLK_OBS4_EN | - AR724X_GPIO_FUNC_CLK_OBS5_EN | - AR724X_GPIO_FUNC_GE0_MII_CLK_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN | - BIT(20)); - - wnr_get_wmac(wlan_mac_addr, WNR2000V3_MAC0_OFFSET, - WNR2000V3_MAC1_OFFSET, WNR2000V3_WMAC_OFFSET); - - wnr_common_setup(wlan_mac_addr); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000v3_leds_gpio), - wnr2000v3_leds_gpio); - - /* Do not use id=-1, we can have more GPIO key-polled devices */ - ath79_register_gpio_keys_polled(PLATFORM_DEVID_AUTO, - WNR2000V3_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wnr2000v3_keys_gpio), - wnr2000v3_keys_gpio); - - ap9x_pci_setup_wmac_leds(0, wnr2000v3_wmac_leds_gpio, - ARRAY_SIZE(wnr2000v3_wmac_leds_gpio)); - - ap9x_pci_setup_wmac_btns(0, wnr2000v3_wmac_keys_gpio, - ARRAY_SIZE(wnr2000v3_wmac_keys_gpio), - WNR2000V3_KEYS_POLL_INTERVAL); -} - -MIPS_MACHINE(ATH79_MACH_WNR2000_V3, "WNR2000V3", "NETGEAR WNR2000 V3", wnr2000v3_setup); - -static void __init wnr612v2_setup(void) -{ - u8 wlan_mac_addr[6]; - - /* - * Disable JTAG and CLKs. Allow OS to control all link LEDs. - * Note: U-Boot for WNR612v2 sets undocumented bit 15 but - * we leave it for now. - */ - ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE | - AR724X_GPIO_FUNC_UART_EN, - AR724X_GPIO_FUNC_CLK_OBS1_EN | - AR724X_GPIO_FUNC_CLK_OBS2_EN | - AR724X_GPIO_FUNC_CLK_OBS3_EN | - AR724X_GPIO_FUNC_CLK_OBS4_EN | - AR724X_GPIO_FUNC_CLK_OBS5_EN | - AR724X_GPIO_FUNC_GE0_MII_CLK_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - wnr_get_wmac(wlan_mac_addr, WNR2000V3_MAC0_OFFSET, - WNR2000V3_MAC1_OFFSET, WNR2000V3_WMAC_OFFSET); - - wnr_common_setup(wlan_mac_addr); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr612v2_leds_gpio), - wnr612v2_leds_gpio); - - ap9x_pci_setup_wmac_leds(0, wnr612v2_wmac_leds_gpio, - ARRAY_SIZE(wnr612v2_wmac_leds_gpio)); - - ap9x_pci_setup_wmac_btns(0, wnr612v2_wmac_keys_gpio, - ARRAY_SIZE(wnr612v2_wmac_keys_gpio), - WNR2000V3_KEYS_POLL_INTERVAL); -} - -MIPS_MACHINE(ATH79_MACH_WNR612_V2, "WNR612V2", "NETGEAR WNR612 V2", wnr612v2_setup); - -static void __init wnr1000v2_setup(void) -{ - u8 wlan_mac_addr[6]; - - /* - * Disable JTAG and CLKs. Allow OS to control all link LEDs. - * Note: U-Boot for WNR1000v2 sets undocumented bit 15 but - * we leave it for now. - */ - ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE | - AR724X_GPIO_FUNC_UART_EN, - AR724X_GPIO_FUNC_CLK_OBS1_EN | - AR724X_GPIO_FUNC_CLK_OBS2_EN | - AR724X_GPIO_FUNC_CLK_OBS3_EN | - AR724X_GPIO_FUNC_CLK_OBS4_EN | - AR724X_GPIO_FUNC_CLK_OBS5_EN | - AR724X_GPIO_FUNC_GE0_MII_CLK_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - wnr_get_wmac(wlan_mac_addr, WNR2000V3_MAC0_OFFSET, - WNR2000V3_MAC1_OFFSET, WNR2000V3_WMAC_OFFSET); - - wnr_common_setup(wlan_mac_addr); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr1000v2_leds_gpio), - wnr1000v2_leds_gpio); - - ap9x_pci_setup_wmac_leds(0, wnr1000v2_wmac_leds_gpio, - ARRAY_SIZE(wnr1000v2_wmac_leds_gpio)); - - /* All 3 buttons are connected to wireless chip */ - ap9x_pci_setup_wmac_btns(0, wnr1000v2_wmac_keys_gpio, - ARRAY_SIZE(wnr1000v2_wmac_keys_gpio), - WNR2000V3_KEYS_POLL_INTERVAL); -} - -MIPS_MACHINE(ATH79_MACH_WNR1000_V2, "WNR1000V2", "NETGEAR WNR1000 V2", wnr1000v2_setup); - -static void __init wpn824n_setup(void) -{ - ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE, - AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN | - AR724X_GPIO_FUNC_CLK_OBS3_EN); - - wnr_common_setup(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wpn824n_leds_gpio), - wpn824n_leds_gpio); - - ap9x_pci_setup_wmac_leds(0, wpn824n_wmac_leds_gpio, - ARRAY_SIZE(wpn824n_wmac_leds_gpio)); - ap9x_pci_setup_wmac_btns(0, wpn824n_wmac_keys_gpio, - ARRAY_SIZE(wpn824n_wmac_keys_gpio), - WNR2000V3_KEYS_POLL_INTERVAL); -} - -MIPS_MACHINE(ATH79_MACH_WPN824N, "WPN824N", "NETGEAR WPN824N", wpn824n_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c deleted file mode 100644 index c5159a30ca..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * NETGEAR WNR2000v4 board support - * - * Copyright (C) 2015 Michael Bazzinotti <mbazzinotti@gmail.com> - * Copyright (C) 2014 Michaël Burtin <mburtin@gmail.com> - * Copyright (C) 2013 Mathieu Olivari <mathieu.olivari@gmail.com> - * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -/* AR9341 GPIOs */ -#define WNR2000V4_GPIO_LED_PWR_GREEN 0 -#define WNR2000V4_GPIO_LED_PWR_AMBER 1 -#define WNR2000V4_GPIO_LED_WPS 2 -#define WNR2000V4_GPIO_LED_WLAN 12 -#define WNR2000V4_GPIO_LED_LAN1_GREEN 13 -#define WNR2000V4_GPIO_LED_LAN2_GREEN 14 -#define WNR2000V4_GPIO_LED_LAN3_GREEN 15 -#define WNR2000V4_GPIO_LED_LAN4_GREEN 16 -#define WNR2000V4_GPIO_LED_LAN1_AMBER 18 -#define WNR2000V4_GPIO_LED_LAN2_AMBER 19 -#define WNR2000V4_GPIO_LED_LAN3_AMBER 20 -#define WNR2000V4_GPIO_LED_LAN4_AMBER 21 -#define WNR2000V4_GPIO_LED_WAN_GREEN 17 -#define WNR2000V4_GPIO_LED_WAN_AMBER 22 -/* Buttons */ -#define WNR2000V4_GPIO_BTN_WPS 3 -#define WNR2000V4_GPIO_BTN_RESET 4 -#define WNR2000V4_GPIO_BTN_WLAN 11 -#define WNR2000V4_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WNR2000V4_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000V4_KEYS_POLL_INTERVAL) - - -/* ART offsets */ -#define WNR2000V4_MAC0_OFFSET 0 /* WAN/WLAN0 MAC */ -#define WNR2000V4_MAC1_OFFSET 6 /* Eth-switch0 MAC */ - -static struct gpio_led wnr2000v4_leds_gpio[] __initdata = { - { - .name = "netgear:green:power", - .gpio = WNR2000V4_GPIO_LED_PWR_GREEN, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "netgear:amber:status", - .gpio = WNR2000V4_GPIO_LED_PWR_AMBER, - .active_low = 1, - }, - { - .name = "netgear:green:wan", - .gpio = WNR2000V4_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, - { - .name = "netgear:amber:wan", - .gpio = WNR2000V4_GPIO_LED_WAN_AMBER, - .active_low = 1, - }, - { - .name = "netgear:blue:wlan", - .gpio = WNR2000V4_GPIO_LED_WLAN, - .active_low = 1, - }, - /* LAN LEDS */ - { - .name = "netgear:green:lan1", - .gpio = WNR2000V4_GPIO_LED_LAN1_GREEN, - .active_low = 1, - }, - { - .name = "netgear:green:lan2", - .gpio = WNR2000V4_GPIO_LED_LAN2_GREEN, - .active_low = 1, - }, - { - .name = "netgear:green:lan3", - .gpio = WNR2000V4_GPIO_LED_LAN3_GREEN, - .active_low = 1, - }, - { - .name = "netgear:green:lan4", - .gpio = WNR2000V4_GPIO_LED_LAN4_GREEN, - .active_low = 1, - }, - { - .name = "netgear:amber:lan1", - .gpio = WNR2000V4_GPIO_LED_LAN1_AMBER, - .active_low = 1, - }, - { - .name = "netgear:amber:lan2", - .gpio = WNR2000V4_GPIO_LED_LAN2_AMBER, - .active_low = 1, - }, - { - .name = "netgear:amber:lan3", - .gpio = WNR2000V4_GPIO_LED_LAN3_AMBER, - .active_low = 1, - }, - { - .name = "netgear:amber:lan4", - .gpio = WNR2000V4_GPIO_LED_LAN4_AMBER, - .active_low = 1, - }, - { - .name = "netgear:green:wps", - .gpio = WNR2000V4_GPIO_LED_WPS, - .active_low = 1, - }, -}; - -static struct gpio_keys_button wnr2000v4_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WNR2000V4_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNR2000V4_GPIO_BTN_WPS, - .active_low = 1, - }, - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WNR2000V4_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNR2000V4_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "WLAN button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = WNR2000V4_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNR2000V4_GPIO_BTN_WLAN, - .active_low = 1, - }, -}; - -static void __init wnr_common_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_mdio(1, 0x0); - - ath79_register_usb(); - - ath79_register_m25p80(NULL); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); - - ath79_init_mac(ath79_eth0_data.mac_addr, art+WNR2000V4_MAC0_OFFSET, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, art+WNR2000V4_MAC1_OFFSET, 0); - - /* GMAC0 is connected to the PHY0 of the internal switch, GE0 */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(4); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_register_eth(0); - - /* GMAC1 is connected to the internal switch, GE1 */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_register_eth(1); - - ath79_register_wmac(ee, art); -} - -static void __init wnr2000v4_setup(void) -{ - int i; - - wnr_common_setup(); - - /* Ensure no LED has an internal MUX signal, otherwise - control of LED could be lost... This is especially important - for most green LEDS (Eth,WAN).. who arrive in this function with - MUX signals set. */ - for (i = 0; i < ARRAY_SIZE(wnr2000v4_leds_gpio); i++) - ath79_gpio_output_select(wnr2000v4_leds_gpio[i].gpio, - AR934X_GPIO_OUT_GPIO); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000v4_leds_gpio), - wnr2000v4_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WNR2000V4_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wnr2000v4_gpio_keys), - wnr2000v4_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_WNR2000_V4, "WNR2000V4", "NETGEAR WNR2000 V4", wnr2000v4_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000.c deleted file mode 100644 index 6e3becab3a..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * NETGEAR WNR2000 board support - * - * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define WNR2000_GPIO_LED_PWR_GREEN 14 -#define WNR2000_GPIO_LED_PWR_AMBER 7 -#define WNR2000_GPIO_LED_WPS 4 -#define WNR2000_GPIO_LED_WLAN 6 -#define WNR2000_GPIO_BTN_RESET 21 -#define WNR2000_GPIO_BTN_WPS 8 - -#define WNR2000_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WNR2000_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000_KEYS_POLL_INTERVAL) - -static struct gpio_led wnr2000_leds_gpio[] __initdata = { - { - .name = "netgear:green:power", - .gpio = WNR2000_GPIO_LED_PWR_GREEN, - .active_low = 1, - }, { - .name = "netgear:amber:power", - .gpio = WNR2000_GPIO_LED_PWR_AMBER, - .active_low = 1, - }, { - .name = "netgear:green:wps", - .gpio = WNR2000_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "netgear:blue:wlan", - .gpio = WNR2000_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button wnr2000_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNR2000_GPIO_BTN_RESET, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNR2000_GPIO_BTN_WPS, - } -}; - -static void __init wnr2000_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.has_ar8216 = 1; - - ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = 0x10; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio), - wnr2000_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WNR2000_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wnr2000_gpio_keys), - wnr2000_gpio_keys); - - ath79_register_wmac(eeprom, NULL); -} - -MIPS_MACHINE(ATH79_MACH_WNR2000, "WNR2000", "NETGEAR WNR2000", wnr2000_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c deleted file mode 100644 index 74166c5376..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c +++ /dev/null @@ -1,246 +0,0 @@ -/* - * NETGEAR WNR2200 board support - * - * Copyright (C) 2013 Aidan Kissane <aidankissane at googlemail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/kernel.h> /* for max() macro */ - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> /* needed to disable switch LEDs */ -#include "common.h" /* needed to disable switch LEDs */ - -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -/* WNR2200 - connected through AR7241 */ -#define WNR2200_GPIO_LED_LAN2_AMBER 0 -#define WNR2200_GPIO_LED_LAN4_AMBER 1 -#define WNR2200_GPIO_LED_LAN1_AMBER 6 /* AR724X_GPIO_FUNC_JTAG_DISABLE */ -#define WNR2200_GPIO_LED_WPS_GREEN 7 /* AR724X_GPIO_FUNC_JTAG_DISABLE */ -#define WNR2200_GPIO_LED_USB_GREEN 8 /* AR724X_GPIO_FUNC_JTAG_DISABLE */ -#define WNR2200_GPIO_LED_LAN3_AMBER 11 -#define WNR2200_GPIO_LED_WAN_AMBER 12 -#define WNR2200_GPIO_LED_LAN1_GREEN 13 /* AR724X_..._ETH_SWITCH_LED0 */ -#define WNR2200_GPIO_LED_LAN2_GREEN 14 /* AR724X_..._ETH_SWITCH_LED1 */ -#define WNR2200_GPIO_LED_LAN3_GREEN 15 /* AR724X_..._ETH_SWITCH_LED2 */ -#define WNR2200_GPIO_LED_LAN4_GREEN 16 /* AR724X_..._ETH_SWITCH_LED3 */ -#define WNR2200_GPIO_LED_WAN_GREEN 17 /* AR724X_..._ETH_SWITCH_LED4 */ - -/* WNR2200 - connected through AR9287 */ -#define WNR2200_GPIO_WMAC_LED_WLAN_BLUE 0 -#define WNR2200_GPIO_WMAC_LED_TEST_AMBER 1 -#define WNR2200_GPIO_WMAC_LED_POWER_GREEN 2 -#define WNR2200_GPIO_WMAC_BTN_RFKILL 3 -#define WNR2200_GPIO_WMAC_USB_5V 4 -#define WNR2200_GPIO_WMAC_BTN_WPS 5 -#define WNR2200_GPIO_WMAC_BTN_RESET 6 - -#define WNR2200_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WNR2200_KEYS_DEBOUNCE_INTERVAL (3 * WNR2200_KEYS_POLL_INTERVAL) - -#define WNR2200_MAC0_OFFSET 0 -#define WNR2200_MAC1_OFFSET 6 -#define WNR2200_PCIE_CALDATA_OFFSET 0x1000 -#define WNR2200_WMAC_OFFSET 0x108c /* wireless MAC is inside ART */ - -static struct gpio_led wnr2200_leds_gpio[] __initdata = { - { - .name = "netgear:amber:lan1", - .gpio = WNR2200_GPIO_LED_LAN1_AMBER, - .active_low = 1, - }, { - .name = "netgear:amber:lan2", - .gpio = WNR2200_GPIO_LED_LAN2_AMBER, - .active_low = 1, - }, { - .name = "netgear:amber:lan3", - .gpio = WNR2200_GPIO_LED_LAN3_AMBER, - .active_low = 1, - }, { - .name = "netgear:amber:lan4", - .gpio = WNR2200_GPIO_LED_LAN4_AMBER, - .active_low = 1, - }, { - .name = "netgear:amber:wan", - .gpio = WNR2200_GPIO_LED_WAN_AMBER, - .active_low = 1, - }, { - .name = "netgear:green:lan1", - .gpio = WNR2200_GPIO_LED_LAN1_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:lan2", - .gpio = WNR2200_GPIO_LED_LAN2_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:lan3", - .gpio = WNR2200_GPIO_LED_LAN3_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:lan4", - .gpio = WNR2200_GPIO_LED_LAN4_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:usb", - .gpio = WNR2200_GPIO_LED_USB_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:wan", - .gpio = WNR2200_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, { - .name = "netgear:green:wps", - .gpio = WNR2200_GPIO_LED_WPS_GREEN, - .active_low = 1, - } -}; - -static struct gpio_led wnr2200_wmac_leds_gpio[] = { - { - .name = "netgear:amber:test", - .gpio = WNR2200_GPIO_WMAC_LED_TEST_AMBER, - .active_low = 1, - }, { - .name = "netgear:green:power", - .gpio = WNR2200_GPIO_WMAC_LED_POWER_GREEN, - .active_low = 1, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, { - .name = "netgear:blue:wlan", - .gpio = WNR2200_GPIO_WMAC_LED_WLAN_BLUE, - .active_low = 1, - } -}; - -static struct gpio_keys_button wnr2200_wmac_keys_gpio[] = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WNR2200_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNR2200_GPIO_WMAC_BTN_RESET, - .active_low = 1, - }, { - .desc = "rfkill", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = WNR2200_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNR2200_GPIO_WMAC_BTN_RFKILL, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WNR2200_KEYS_DEBOUNCE_INTERVAL, - .gpio = WNR2200_GPIO_WMAC_BTN_WPS, - .active_low = 1, - } -}; - -/* - * For WNR2200 ART flash area used for WLAN MAC is usually empty (0xff) - * so ath9k driver uses random MAC instead each time module is loaded. - * OpenWrt's original fix was to copy eth1 address to WLAN interface. - * New solution does not duplicate hardware addresses and is taken from - * WNR2000v3 code. It assigns permanent WLAN MAC equal to ethN's MAC - * plus 1, so network interfaces get sequential addresses. - * If ART wireless MAC address field has been filled by user, use it. - */ -static void __init wnr2200_get_wmac(u8 *wmac_gen_addr, int mac0_art_offset, - int mac1_art_offset, int wmac_art_offset) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *eth0_mac_addr = (u8 *) (art + mac0_art_offset); - u8 *eth1_mac_addr = (u8 *) (art + mac1_art_offset); - u8 *wlan_mac_addr = (u8 *) (art + wmac_art_offset); - - /* only 0xff if all bits are set - address is invalid, empty area */ - if ((wlan_mac_addr[0] & wlan_mac_addr[1] & wlan_mac_addr[2] & - wlan_mac_addr[3] & wlan_mac_addr[4] & wlan_mac_addr[5]) == 0xff) { - memcpy(wmac_gen_addr, eth0_mac_addr, 5); - wmac_gen_addr[5] = max(eth0_mac_addr[5], eth1_mac_addr[5]) + 1; - - /* Avoid potential conflict in case max(0xff,0x00)+1==0x00 */ - if (!wmac_gen_addr[5]) - wmac_gen_addr[5] = 1; - } else - memcpy(wmac_gen_addr, wlan_mac_addr, 6); -} - -static void __init wnr2200_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 wlan_mac_addr[6]; - - /* - * Disable JTAG to use all AR724X GPIO LEDs. Disable CLKs. - * Allow OS to control all link LEDs. - */ - ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE | - AR724X_GPIO_FUNC_UART_EN, - AR724X_GPIO_FUNC_CLK_OBS1_EN | - AR724X_GPIO_FUNC_CLK_OBS2_EN | - AR724X_GPIO_FUNC_CLK_OBS3_EN | - AR724X_GPIO_FUNC_CLK_OBS4_EN | - AR724X_GPIO_FUNC_CLK_OBS5_EN | - AR724X_GPIO_FUNC_GE0_MII_CLK_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + WNR2200_MAC0_OFFSET, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_init_mac(ath79_eth1_data.mac_addr, art + WNR2200_MAC1_OFFSET, 0); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = 0x10; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(NULL); - - wnr2200_get_wmac(wlan_mac_addr, WNR2200_MAC0_OFFSET, - WNR2200_MAC1_OFFSET, WNR2200_WMAC_OFFSET); - ap9x_pci_setup_wmac_led_pin(0, 0); - ap91_pci_init(art + WNR2200_PCIE_CALDATA_OFFSET, wlan_mac_addr); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2200_leds_gpio), - wnr2200_leds_gpio); - - ap9x_pci_setup_wmac_leds(0, wnr2200_wmac_leds_gpio, - ARRAY_SIZE(wnr2200_wmac_leds_gpio)); - - /* All 3 buttons are connected to wireless chip */ - ap9x_pci_setup_wmac_btns(0, wnr2200_wmac_keys_gpio, - ARRAY_SIZE(wnr2200_wmac_keys_gpio), - WNR2200_KEYS_POLL_INTERVAL); - - /* enable power for the USB port */ - ap9x_pci_setup_wmac_gpio(0, BIT(WNR2200_GPIO_WMAC_USB_5V), - BIT(WNR2200_GPIO_WMAC_USB_5V)); - - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_WNR2200, "WNR2200", "NETGEAR WNR2200", wnr2200_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wp543.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wp543.c deleted file mode 100644 index dc4aee0c1b..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wp543.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * Compex WP543/WPJ543 board support - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -#define WP543_GPIO_SW6 2 -#define WP543_GPIO_LED_1 3 -#define WP543_GPIO_LED_2 4 -#define WP543_GPIO_LED_WLAN 5 -#define WP543_GPIO_LED_CONN 6 -#define WP543_GPIO_LED_DIAG 7 -#define WP543_GPIO_SW4 8 - -#define WP543_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WP543_KEYS_DEBOUNCE_INTERVAL (3 * WP543_KEYS_POLL_INTERVAL) - -static struct gpio_led wp543_leds_gpio[] __initdata = { - { - .name = "wp543:green:led1", - .gpio = WP543_GPIO_LED_1, - .active_low = 1, - }, { - .name = "wp543:green:led2", - .gpio = WP543_GPIO_LED_2, - .active_low = 1, - }, { - .name = "wp543:green:wlan", - .gpio = WP543_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "wp543:green:conn", - .gpio = WP543_GPIO_LED_CONN, - .active_low = 1, - }, { - .name = "wp543:green:diag", - .gpio = WP543_GPIO_LED_DIAG, - .active_low = 1, - } -}; - -static struct gpio_keys_button wp543_gpio_keys[] __initdata = { - { - .desc = "sw6", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL, - .gpio = WP543_GPIO_SW6, - .active_low = 1, - }, { - .desc = "sw4", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL, - .gpio = WP543_GPIO_SW4, - .active_low = 1, - } -}; - -static const char *wp543_part_probes[] = { - "MyLoader", - NULL, -}; - -static struct flash_platform_data wp543_flash_data = { - .part_probes = wp543_part_probes, -}; - -static void __init wp543_setup(void) -{ - ath79_register_m25p80(&wp543_flash_data); - - ath79_register_mdio(0, 0xfffffff0); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = 0x0f; - ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC | - AR71XX_RESET_GE0_PHY; - ath79_register_eth(0); - - ath79_register_usb(); - ath79_register_pci(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio), - wp543_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WP543_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wp543_gpio_keys), - wp543_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_WP543, "WP543", "Compex WP543", wp543_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpe72.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpe72.c deleted file mode 100644 index 9452484279..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpe72.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Compex WPE72 board support - * - * Copyright (C) 2012 Johnathan Boyce<jon.boyce@globalreach.eu.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" -#include "pci.h" - -#define WPE72_GPIO_RESET 12 -#define WPE72_GPIO_LED_DIAG 13 -#define WPE72_GPIO_LED_1 14 -#define WPE72_GPIO_LED_2 15 -#define WPE72_GPIO_LED_3 16 -#define WPE72_GPIO_LED_4 17 - -#define WPE72_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WPE72_KEYS_DEBOUNCE_INTERVAL (3 * WPE72_KEYS_POLL_INTERVAL) - -static struct gpio_led wpe72_leds_gpio[] __initdata = { - { - .name = "wpe72:green:led1", - .gpio = WPE72_GPIO_LED_1, - .active_low = 1, - }, { - .name = "wpe72:green:led2", - .gpio = WPE72_GPIO_LED_2, - .active_low = 1, - }, { - .name = "wpe72:green:led3", - .gpio = WPE72_GPIO_LED_3, - .active_low = 1, - }, { - .name = "wpe72:green:led4", - .gpio = WPE72_GPIO_LED_4, - .active_low = 1, - }, { - .name = "wpe72:green:diag", - .gpio = WPE72_GPIO_LED_DIAG, - .active_low = 1, - } -}; - -static struct gpio_keys_button wpe72_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WPE72_KEYS_DEBOUNCE_INTERVAL, - .gpio = WPE72_GPIO_RESET, - .active_low = 1, - } -}; - -static const char *wpe72_part_probes[] = { - "MyLoader", - NULL, -}; - -static struct flash_platform_data wpe72_flash_data = { - .part_probes = wpe72_part_probes, -}; - -static void __init wpe72_setup(void) -{ - ath79_register_m25p80(&wpe72_flash_data); - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_usb(); - ath79_register_pci(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wpe72_leds_gpio), - wpe72_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WPE72_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wpe72_gpio_keys), - wpe72_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_WPE72, "WPE72", "Compex WPE72", wpe72_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj342.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj342.c deleted file mode 100644 index 65d6478867..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj342.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Compex WPJ342 board support - * - * Copyright (c) 2011 Qualcomm Atheros - * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/irq.h> -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> -#include <linux/export.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "pci.h" -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-nfc.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define WPJ342_GPIO_LED_STATUS 11 -#define WPJ342_GPIO_LED_SIG1 14 -#define WPJ342_GPIO_LED_SIG2 13 -#define WPJ342_GPIO_LED_SIG3 12 -#define WPJ342_GPIO_LED_SIG4 11 -#define WPJ342_GPIO_BUZZER 15 - -#define WPJ342_GPIO_BTN_RESET 17 - -#define WPJ342_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WPJ342_KEYS_DEBOUNCE_INTERVAL (3 * WPJ342_KEYS_POLL_INTERVAL) - -#define WPJ342_MAC0_OFFSET 0x10 -#define WPJ342_MAC1_OFFSET 0x18 -#define WPJ342_WMAC_CALDATA_OFFSET 0x1000 -#define WPJ342_PCIE_CALDATA_OFFSET 0x5000 - -#define WPJ342_ART_SIZE 0x8000 - -static struct gpio_led wpj342_leds_gpio[] __initdata = { - { - .name = "wpj342:red:sig1", - .gpio = WPJ342_GPIO_LED_SIG1, - .active_low = 1, - }, - { - .name = "wpj342:yellow:sig2", - .gpio = WPJ342_GPIO_LED_SIG2, - .active_low = 1, - }, - { - .name = "wpj342:green:sig3", - .gpio = WPJ342_GPIO_LED_SIG3, - .active_low = 1, - }, - { - .name = "wpj342:green:sig4", - .gpio = WPJ342_GPIO_LED_SIG4, - .active_low = 1, - }, - { - .name = "wpj342:buzzer", - .gpio = WPJ342_GPIO_BUZZER, - .active_low = 0, - } -}; - -static struct gpio_keys_button wpj342_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WPJ342_KEYS_DEBOUNCE_INTERVAL, - .gpio = WPJ342_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg wpj342_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_led_cfg wpj342_ar8327_led_cfg = { - .led_ctrl0 = 0x00000000, - .led_ctrl1 = 0xc737c737, - .led_ctrl2 = 0x00000000, - .led_ctrl3 = 0x00c30c00, - .open_drain = true, -}; - -static struct ar8327_platform_data wpj342_ar8327_data = { - .pad0_cfg = &wpj342_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &wpj342_ar8327_led_cfg, -}; - -static struct mdio_board_info wpj342_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &wpj342_ar8327_data, - }, -}; - - -static void __init wpj342_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac = (u8 *) KSEG1ADDR(0x1f02e000); - - ath79_register_m25p80(NULL); - ath79_register_leds_gpio(-1, ARRAY_SIZE(wpj342_leds_gpio), - wpj342_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WPJ342_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wpj342_gpio_keys), - wpj342_gpio_keys); - - ath79_register_usb(); - - ath79_register_wmac(art + WPJ342_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_pci(); - - mdiobus_register_board_info(wpj342_mdio0_info, - ARRAY_SIZE(wpj342_mdio0_info)); - - ath79_register_mdio(1, 0x0); - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac + WPJ342_MAC0_OFFSET, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac + WPJ342_MAC1_OFFSET, 0); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0); - - /* GMAC0 is connected to an AR8236 switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_WPJ342, "WPJ342", "Compex WPJ342", wpj342_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj344.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj344.c deleted file mode 100644 index ffb9ef6dfa..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj344.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - * Compex WPJ344 board support - * - * Copyright (c) 2011 Qualcomm Atheros - * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/phy.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-usb.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define WPJ344_GPIO_LED_SIG1 15 -#define WPJ344_GPIO_LED_SIG2 20 -#define WPJ344_GPIO_LED_SIG3 21 -#define WPJ344_GPIO_LED_SIG4 22 -#define WPJ344_GPIO_LED_STATUS 14 - -#define WPJ344_GPIO_BTN_RESET 12 - -#define WPJ344_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WPJ344_KEYS_DEBOUNCE_INTERVAL (3 * WPJ344_KEYS_POLL_INTERVAL) - -#define WPJ344_MAC0_OFFSET 0x10 -#define WPJ344_MAC1_OFFSET 0x18 -#define WPJ344_WMAC_CALDATA_OFFSET 0x1000 -#define WPJ344_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led wpj344_leds_gpio[] __initdata = { - { - .name = "wpj344:green:status", - .gpio = WPJ344_GPIO_LED_STATUS, - .active_low = 1, - }, - { - .name = "wpj344:red:sig1", - .gpio = WPJ344_GPIO_LED_SIG1, - .active_low = 1, - }, - { - .name = "wpj344:yellow:sig2", - .gpio = WPJ344_GPIO_LED_SIG2, - .active_low = 1, - }, - { - .name = "wpj344:green:sig3", - .gpio = WPJ344_GPIO_LED_SIG3, - .active_low = 1, - }, - { - .name = "wpj344:green:sig4", - .gpio = WPJ344_GPIO_LED_SIG4, - .active_low = 1, - } -}; - -static struct gpio_keys_button wpj344_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WPJ344_KEYS_DEBOUNCE_INTERVAL, - .gpio = WPJ344_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg wpj344_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, - .mac06_exchange_dis = true, -}; - -static struct ar8327_led_cfg wpj344_ar8327_led_cfg = { - .led_ctrl0 = 0x00000000, - .led_ctrl1 = 0xc737c737, - .led_ctrl2 = 0x00000000, - .led_ctrl3 = 0x00c30c00, - .open_drain = true, -}; - -static struct ar8327_platform_data wpj344_ar8327_data = { - .pad0_cfg = &wpj344_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &wpj344_ar8327_led_cfg, -}; - -static struct mdio_board_info wpj344_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &wpj344_ar8327_data, - }, -}; - -static void __init wpj344_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac = (u8 *) KSEG1ADDR(0x1f02e000); - - ath79_register_m25p80(NULL); - ath79_register_leds_gpio(-1, ARRAY_SIZE(wpj344_leds_gpio), - wpj344_leds_gpio); - ath79_register_gpio_keys_polled(-1, WPJ344_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wpj344_gpio_keys), - wpj344_gpio_keys); - - ath79_register_usb(); - - ath79_register_wmac(art + WPJ344_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_pci(); - - mdiobus_register_board_info(wpj344_mdio0_info, - ARRAY_SIZE(wpj344_mdio0_info)); - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac + WPJ344_MAC0_OFFSET, 0); - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | - AR934X_ETH_CFG_SW_ONLY_MODE); - - /* GMAC0 is connected to an AR8327 switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_WPJ344, "WPJ344", "Compex WPJ344", wpj344_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c deleted file mode 100644 index 351293230f..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Compex WPJ531 board support - * - * Copyright (c) 2012 Qualcomm Atheros - * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "pci.h" -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define WPJ531_GPIO_LED_SIG1 12 -#define WPJ531_GPIO_LED_SIG2 14 -#define WPJ531_GPIO_LED_SIG3 15 -#define WPJ531_GPIO_LED_SIG4 16 -#define WPJ531_GPIO_BUZZER 4 - -#define WPJ531_GPIO_BTN_RESET 17 - -#define WPJ531_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WPJ531_KEYS_DEBOUNCE_INTERVAL (3 * WPJ531_KEYS_POLL_INTERVAL) - -#define WPJ531_MAC0_OFFSET 0x10 -#define WPJ531_MAC1_OFFSET 0x18 -#define WPJ531_WMAC_CALDATA_OFFSET 0x1000 -#define WPJ531_PCIE_CALDATA_OFFSET 0x5000 - -#define WPJ531_ART_SIZE 0x8000 - -static struct gpio_led wpj531_leds_gpio[] __initdata = { - { - .name = "wpj531:red:sig1", - .gpio = WPJ531_GPIO_LED_SIG1, - .active_low = 1, - }, - { - .name = "wpj531:yellow:sig2", - .gpio = WPJ531_GPIO_LED_SIG2, - .active_low = 1, - }, - { - .name = "wpj531:green:sig3", - .gpio = WPJ531_GPIO_LED_SIG3, - .active_low = 1, - }, - { - .name = "wpj531:green:sig4", - .gpio = WPJ531_GPIO_LED_SIG4, - .active_low = 1, - }, - { - .name = "wpj531:buzzer", - .gpio = WPJ531_GPIO_BUZZER, - .active_low = 0, - } -}; - -static struct gpio_keys_button wpj531_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WPJ531_KEYS_DEBOUNCE_INTERVAL, - .gpio = WPJ531_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static void __init common_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac = (u8 *) KSEG1ADDR(0x1f02e000); - - ath79_register_m25p80(NULL); - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_mdio(0, 0x0); - - /* LAN */ - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.phy_mask = BIT(4); - ath79_init_mac(ath79_eth0_data.mac_addr, mac + WPJ531_MAC0_OFFSET, 0); - ath79_register_eth(0); - - /* WAN */ - ath79_switch_data.phy4_mii_en = 1; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_switch_data.phy_poll_mask |= BIT(4); - ath79_init_mac(ath79_eth1_data.mac_addr, mac + WPJ531_MAC1_OFFSET, 0); - ath79_register_eth(1); - - ath79_register_wmac(art + WPJ531_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_pci(); - ath79_register_usb(); -} - -static void __init wpj531_setup(void) -{ - common_setup(); - - ath79_register_leds_gpio(-1, - ARRAY_SIZE(wpj531_leds_gpio), - wpj531_leds_gpio); - - ath79_register_gpio_keys_polled(-1, - WPJ531_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wpj531_gpio_keys), - wpj531_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_WPJ531, "WPJ531", "Compex WPJ531", wpj531_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj558.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj558.c deleted file mode 100644 index 1839cc6676..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj558.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * Compex WPJ558 board support - * - * Copyright (c) 2012 Qualcomm Atheros - * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-eth.h" -#include "dev-usb.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define WPJ558_GPIO_LED_SIG1 14 -#define WPJ558_GPIO_LED_SIG2 15 -#define WPJ558_GPIO_LED_SIG3 22 -#define WPJ558_GPIO_LED_SIG4 23 -#define WPJ558_GPIO_BUZZER 4 - -#define WPJ558_GPIO_BTN_RESET 17 - -#define WPJ558_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WPJ558_KEYS_DEBOUNCE_INTERVAL (3 * WPJ558_KEYS_POLL_INTERVAL) - -#define WPJ558_MAC_OFFSET 0x10 -#define WPJ558_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led wpj558_leds_gpio[] __initdata = { - { - .name = "wpj558:red:sig1", - .gpio = WPJ558_GPIO_LED_SIG1, - .active_low = 1, - }, - { - .name = "wpj558:yellow:sig2", - .gpio = WPJ558_GPIO_LED_SIG2, - .active_low = 1, - }, - { - .name = "wpj558:green:sig3", - .gpio = WPJ558_GPIO_LED_SIG3, - .active_low = 1, - }, - { - .name = "wpj558:green:sig4", - .gpio = WPJ558_GPIO_LED_SIG4, - .active_low = 1, - }, - { - .name = "wpj558:buzzer", - .gpio = WPJ558_GPIO_BUZZER, - .active_low = 0, - } -}; - -static struct gpio_keys_button wpj558_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WPJ558_KEYS_DEBOUNCE_INTERVAL, - .gpio = WPJ558_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg wpj558_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -static struct ar8327_pad_cfg wpj558_ar8327_pad6_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_platform_data wpj558_ar8327_data = { - .pad0_cfg = &wpj558_ar8327_pad0_cfg, - .pad6_cfg = &wpj558_ar8327_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .port6_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info wpj558_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &wpj558_ar8327_data, - }, -}; - -static void __init wpj558_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac = (u8 *) KSEG1ADDR(0x1f02e000); - - ath79_register_m25p80(NULL); - ath79_register_leds_gpio(-1, ARRAY_SIZE(wpj558_leds_gpio), - wpj558_leds_gpio); - ath79_register_gpio_keys_polled(-1, WPJ558_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wpj558_gpio_keys), - wpj558_gpio_keys); - - ath79_register_usb(); - - ath79_register_wmac(art + WPJ558_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_pci(); - - mdiobus_register_board_info(wpj558_mdio0_info, - ARRAY_SIZE(wpj558_mdio0_info)); - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac + WPJ558_MAC_OFFSET, 0); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - /* GMAC0 is connected to an AR8327 switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x56000000; - - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_WPJ558, "WPJ558", "Compex WPJ558", wpj558_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj563.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj563.c deleted file mode 100644 index d884be916b..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj563.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * Compex WPJ563 board support - * - * Copyright (c) 2015 Qualcomm Atheros - * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-m25p80.h" -#include "machtypes.h" -#include "pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" - -#define WPJ563_GPIO_LED_SIG1 1 -#define WPJ563_GPIO_LED_SIG2 5 -#define WPJ563_GPIO_LED_SIG3 6 -#define WPJ563_GPIO_LED_SIG4 7 -#define WPJ563_GPIO_BUZZER 19 - -#define WPJ563_GPIO_BTN_RESET 2 -#define WPJ563_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WPJ563_KEYS_DEBOUNCE_INTERVAL (3 * WPJ563_KEYS_POLL_INTERVAL) - -#define WPJ563_MAC0_OFFSET 0x10 -#define WPJ563_MAC1_OFFSET 0x18 -#define WPJ563_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led WPJ563_leds_gpio[] __initdata = { - { - .name = "wpj563:green:sig1", - .gpio = WPJ563_GPIO_LED_SIG1, - .active_low = 1, - }, - { - .name = "wpj563:green:sig2", - .gpio = WPJ563_GPIO_LED_SIG2, - .active_low = 1, - }, - { - .name = "wpj563:green:sig3", - .gpio = WPJ563_GPIO_LED_SIG3, - .active_low = 1, - }, - { - .name = "wpj563:green:sig4", - .gpio = WPJ563_GPIO_LED_SIG4, - .active_low = 1, - }, - { - .name = "wpj563:buzzer", - .gpio = WPJ563_GPIO_BUZZER, - .active_low = 0, - } -}; - -static struct gpio_keys_button WPJ563_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WPJ563_KEYS_DEBOUNCE_INTERVAL, - .gpio = WPJ563_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg WPJ563_ar8337_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -static struct ar8327_platform_data WPJ563_ar8337_data = { - .pad0_cfg = &WPJ563_ar8337_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info WPJ563_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &WPJ563_ar8337_data, - }, -}; - -static void __init WPJ563_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac = (u8 *) KSEG1ADDR(0x1f02e000); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(WPJ563_leds_gpio), - WPJ563_leds_gpio); - ath79_register_gpio_keys_polled(-1, WPJ563_KEYS_POLL_INTERVAL, - ARRAY_SIZE(WPJ563_gpio_keys), - WPJ563_gpio_keys); - - ath79_register_usb(); - - ath79_register_wmac(art + WPJ563_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_pci(); - - mdiobus_register_board_info(WPJ563_mdio0_info, - ARRAY_SIZE(WPJ563_mdio0_info)); - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac + WPJ563_MAC0_OFFSET, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac + WPJ563_MAC1_OFFSET, 0); - - /* GMAC0 is connected to an QCA8334 switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_WPJ563, "WPJ563", "Compex WPJ563", WPJ563_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wrt160nl.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wrt160nl.c deleted file mode 100644 index ede3c214c2..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wrt160nl.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Linksys WRT160NL board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "nvram.h" -#include "machtypes.h" - -#define WRT160NL_GPIO_LED_POWER 14 -#define WRT160NL_GPIO_LED_WPS_AMBER 9 -#define WRT160NL_GPIO_LED_WPS_BLUE 8 -#define WRT160NL_GPIO_LED_WLAN 6 - -#define WRT160NL_GPIO_BTN_WPS 7 -#define WRT160NL_GPIO_BTN_RESET 21 - -#define WRT160NL_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WRT160NL_KEYS_DEBOUNCE_INTERVAL (3 * WRT160NL_KEYS_POLL_INTERVAL) - -#define WRT160NL_NVRAM_ADDR 0x1f7e0000 -#define WRT160NL_NVRAM_SIZE 0x10000 - -static const char *wrt160nl_part_probes[] = { - "cybertan", - NULL, -}; - -static struct flash_platform_data wrt160nl_flash_data = { - .part_probes = wrt160nl_part_probes, -}; - -static struct gpio_led wrt160nl_leds_gpio[] __initdata = { - { - .name = "wrt160nl:blue:power", - .gpio = WRT160NL_GPIO_LED_POWER, - .active_low = 1, - .default_trigger = "default-on", - }, { - .name = "wrt160nl:amber:wps", - .gpio = WRT160NL_GPIO_LED_WPS_AMBER, - .active_low = 1, - }, { - .name = "wrt160nl:blue:wps", - .gpio = WRT160NL_GPIO_LED_WPS_BLUE, - .active_low = 1, - }, { - .name = "wrt160nl:blue:wlan", - .gpio = WRT160NL_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button wrt160nl_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL, - .gpio = WRT160NL_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL, - .gpio = WRT160NL_GPIO_BTN_WPS, - .active_low = 1, - } -}; - -static void __init wrt160nl_setup(void) -{ - const char *nvram = (char *) KSEG1ADDR(WRT160NL_NVRAM_ADDR); - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - u8 mac[6]; - - if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE, - "lan_hwaddr=", mac) == 0) { - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - } - - ath79_register_mdio(0, 0x0); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.phy_mask = 0x01; - - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = 0x10; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(&wrt160nl_flash_data); - - ath79_register_usb(); - - if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE, - "wl0_hwaddr=", mac) == 0) - ath79_register_wmac(eeprom, mac); - else - ath79_register_wmac(eeprom, NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio), - wrt160nl_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WRT160NL_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wrt160nl_gpio_keys), - wrt160nl_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_WRT160NL, "WRT160NL", "Linksys WRT160NL", - wrt160nl_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wrt400n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wrt400n.c deleted file mode 100644 index 6c4c1cb0d6..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wrt400n.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * Linksys WRT400N board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "machtypes.h" - -#define WRT400N_GPIO_LED_POWER 1 -#define WRT400N_GPIO_LED_WPS_BLUE 4 -#define WRT400N_GPIO_LED_WPS_AMBER 5 -#define WRT400N_GPIO_LED_WLAN 6 - -#define WRT400N_GPIO_BTN_RESET 8 -#define WRT400N_GPIO_BTN_WLSEC 3 - -#define WRT400N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WRT400N_KEYS_DEBOUNE_INTERVAL (3 * WRT400N_KEYS_POLL_INTERVAL) - -#define WRT400N_MAC_ADDR_OFFSET 0x120c -#define WRT400N_CALDATA0_OFFSET 0x1000 -#define WRT400N_CALDATA1_OFFSET 0x5000 - -static struct mtd_partition wrt400n_partitions[] = { - { - .name = "uboot", - .offset = 0, - .size = 0x030000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "env", - .offset = 0x030000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "linux", - .offset = 0x040000, - .size = 0x140000, - }, { - .name = "rootfs", - .offset = 0x180000, - .size = 0x630000, - }, { - .name = "nvram", - .offset = 0x7b0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "factory", - .offset = 0x7c0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "language", - .offset = 0x7d0000, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "caldata", - .offset = 0x7f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x040000, - .size = 0x770000, - } -}; - -static struct flash_platform_data wrt400n_flash_data = { - .parts = wrt400n_partitions, - .nr_parts = ARRAY_SIZE(wrt400n_partitions), -}; - -static struct gpio_led wrt400n_leds_gpio[] __initdata = { - { - .name = "wrt400n:blue:wps", - .gpio = WRT400N_GPIO_LED_WPS_BLUE, - .active_low = 1, - }, { - .name = "wrt400n:amber:wps", - .gpio = WRT400N_GPIO_LED_WPS_AMBER, - .active_low = 1, - }, { - .name = "wrt400n:blue:wlan", - .gpio = WRT400N_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "wrt400n:blue:power", - .gpio = WRT400N_GPIO_LED_POWER, - .active_low = 0, - .default_trigger = "default-on", - } -}; - -static struct gpio_keys_button wrt400n_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL, - .gpio = WRT400N_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "wlsec", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL, - .gpio = WRT400N_GPIO_BTN_WLSEC, - .active_low = 1, - } -}; - -static void __init wrt400n_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac = art + WRT400N_MAC_ADDR_OFFSET; - - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2); - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ath79_eth1_data.phy_mask = 0x10; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_m25p80(&wrt400n_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio), - wrt400n_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WRT400N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wrt400n_gpio_keys), - wrt400n_gpio_keys); - - ap94_pci_init(art + WRT400N_CALDATA0_OFFSET, NULL, - art + WRT400N_CALDATA1_OFFSET, NULL); -} - -MIPS_MACHINE(ATH79_MACH_WRT400N, "WRT400N", "Linksys WRT400N", wrt400n_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wrtnode2q.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wrtnode2q.c deleted file mode 100644 index 150a28b0d7..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wrtnode2q.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * WRTnode2Q board support - * - * Copyright (c) 2013 The Linux Foundation. All rights reserved. - * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2015 Kelei <xzmu@wrtnode.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define WRTNODE2Q_GPIO_LED_WLAN 12 -#define WRTNODE2Q_GPIO_LED_WPS 13 -#define WRTNODE2Q_GPIO_LED_STATUS 13 - -#define WRTNODE2Q_GPIO_LED_WAN 4 -#define WRTNODE2Q_GPIO_LED_LAN1 16 -#define WRTNODE2Q_GPIO_LED_LAN2 15 -#define WRTNODE2Q_GPIO_LED_LAN3 14 -#define WRTNODE2Q_GPIO_LED_LAN4 11 - -#define WRTNODE2Q_GPIO_BTN_WPS 17 - -#define WRTNODE2Q_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WRTNODE2Q_KEYS_DEBOUNCE_INTERVAL (3 * WRTNODE2Q_KEYS_POLL_INTERVAL) - -#define WRTNODE2Q_MAC0_OFFSET 0 -#define WRTNODE2Q_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led wrtnode2q_leds_gpio[] __initdata = { - { - .name = "wrtnode2q:green:status", - .gpio = WRTNODE2Q_GPIO_LED_STATUS, - .active_low = 1, - }, - { - .name = "wrtnode2q:green:wlan", - .gpio = WRTNODE2Q_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button wrtnode2q_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WRTNODE2Q_KEYS_DEBOUNCE_INTERVAL, - .gpio = WRTNODE2Q_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - -static void __init wrtnode2q_gpio_led_setup(void) -{ - ath79_register_leds_gpio(-1, ARRAY_SIZE(wrtnode2q_leds_gpio), - wrtnode2q_leds_gpio); - ath79_register_gpio_keys_polled(-1, WRTNODE2Q_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wrtnode2q_gpio_keys), - wrtnode2q_gpio_keys); -} - -static void __init wrtnode2q_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1f040000); - - ath79_register_m25p80(NULL); - - wrtnode2q_gpio_led_setup(); - - ath79_register_pci(); - ath79_register_usb(); - - ath79_register_wmac(art + WRTNODE2Q_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_mdio(0, 0x0); - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + WRTNODE2Q_MAC0_OFFSET, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, art + WRTNODE2Q_MAC0_OFFSET, 1); - - /* LAN ports */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_switch_data.phy_poll_mask |= BIT(4); - ath79_switch_data.phy4_mii_en = 1; - ath79_register_eth(1); - - /* WAN port */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.speed = SPEED_100; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(4); - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_WRTNODE2Q, "WRTNODE2Q", "WRTnode2Q board", - wrtnode2q_setup);
\ No newline at end of file diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-450hp2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-450hp2.c deleted file mode 100644 index ca45309487..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-450hp2.c +++ /dev/null @@ -1,221 +0,0 @@ -/* - * Buffalo WZR-450HP2 board support - * - * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org> - * - * Based on the Qualcomm Atheros AP135/AP136 reference board support code - * Copyright (c) 2012 Qualcomm Atheros - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define WZR_450HP2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WZR_450HP2_KEYS_DEBOUNCE_INTERVAL (3 * WZR_450HP2_KEYS_POLL_INTERVAL) - -#define WZR_450HP2_WMAC_CALDATA_OFFSET 0x1000 - -static struct mtd_partition wzrhpg450h_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x0040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x0040000, - .size = 0x0010000, - }, { - .name = "ART", - .offset = 0x0ff0000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x0050000, - .size = 0x0f90000, - }, { - .name = "user_property", - .offset = 0x0fe0000, - .size = 0x0010000, - } -}; - -static struct flash_platform_data wzr_450hp2_flash_data = { - .parts = wzrhpg450h_partitions, - .nr_parts = ARRAY_SIZE(wzrhpg450h_partitions), -}; - -static struct gpio_led wzr_450hp2_leds_gpio[] __initdata = { - { - .name = "buffalo:green:wps", - .gpio = 3, - .active_low = 1, - }, - { - .name = "buffalo:green:system", - .gpio = 20, - .active_low = 1, - }, - { - .name = "buffalo:green:wlan", - .gpio = 18, - .active_low = 1, - }, -}; - -static struct gpio_keys_button wzr_450hp2_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WZR_450HP2_KEYS_DEBOUNCE_INTERVAL, - .gpio = 17, - .active_low = 1, - }, - { - .desc = "RFKILL button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = WZR_450HP2_KEYS_DEBOUNCE_INTERVAL, - .gpio = 21, - .active_low = 1, - }, -}; - -static const struct ar8327_led_info wzr_450hp2_leds_ar8327[] = { - AR8327_LED_INFO(PHY0_0, HW, "buffalo:green:lan1"), - AR8327_LED_INFO(PHY1_0, HW, "buffalo:green:lan2"), - AR8327_LED_INFO(PHY2_0, HW, "buffalo:green:lan3"), - AR8327_LED_INFO(PHY3_0, HW, "buffalo:green:lan4"), - AR8327_LED_INFO(PHY4_0, HW, "buffalo:green:wan"), -}; - -/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */ -static struct ar8327_pad_cfg wzr_450hp2_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */ -static struct ar8327_pad_cfg wzr_450hp2_ar8327_pad6_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_led_cfg wzr_450hp2_ar8327_led_cfg = { - .led_ctrl0 = 0xcc35cc35, - .led_ctrl1 = 0xca35ca35, - .led_ctrl2 = 0xc935c935, - .led_ctrl3 = 0x03ffff00, - .open_drain = true, -}; - -static struct ar8327_platform_data wzr_450hp2_ar8327_data = { - .pad0_cfg = &wzr_450hp2_ar8327_pad0_cfg, - .pad6_cfg = &wzr_450hp2_ar8327_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .port6_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &wzr_450hp2_ar8327_led_cfg, - .num_leds = ARRAY_SIZE(wzr_450hp2_leds_ar8327), - .leds = wzr_450hp2_leds_ar8327, -}; - -static struct mdio_board_info wzr_450hp2_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &wzr_450hp2_ar8327_data, - }, -}; - -static void __init wzr_450hp2_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *mac_wan = art; - u8 *mac_lan = mac_wan + ETH_ALEN; - - ath79_register_m25p80(&wzr_450hp2_flash_data); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wzr_450hp2_leds_gpio), - wzr_450hp2_leds_gpio); - ath79_register_gpio_keys_polled(-1, WZR_450HP2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wzr_450hp2_gpio_keys), - wzr_450hp2_gpio_keys); - - ath79_register_wmac(art + WZR_450HP2_WMAC_CALDATA_OFFSET, mac_lan); - - mdiobus_register_board_info(wzr_450hp2_mdio0_info, - ARRAY_SIZE(wzr_450hp2_mdio0_info)); - ath79_register_mdio(0, 0x0); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - /* GMAC0 is connected to the RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x56000000; - - ath79_init_mac(ath79_eth0_data.mac_addr, mac_wan, 0); - ath79_register_eth(0); - - /* GMAC1 is connected to the SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_pll_data.pll_1000 = 0x03000101; - - ath79_init_mac(ath79_eth1_data.mac_addr, mac_lan, 0); - ath79_register_eth(1); - - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_WZR_450HP2, "WZR-450HP2", - "Buffalo WZR-450HP2", wzr_450hp2_setup); - diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c deleted file mode 100644 index a9ed3fdd46..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - * Buffalo WZR-HP-AG300H board support - * - * Copyright (C) 2011 Felix Fietkau <nbd@nbd.name> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define WZRHPAG300H_MAC_OFFSET 0x20c -#define WZRHPAG300H_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPAG300H_KEYS_POLL_INTERVAL) - -static struct mtd_partition wzrhpag300h_flash_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x0040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x0040000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "art", - .offset = 0x0050000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x0060000, - .size = 0x1f90000, - }, { - .name = "user_property", - .offset = 0x1ff0000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct flash_platform_data wzrhpag300h_flash_data = { - .parts = wzrhpag300h_flash_partitions, - .nr_parts = ARRAY_SIZE(wzrhpag300h_flash_partitions), -}; - -static struct gpio_led wzrhpag300h_leds_gpio[] __initdata = { - { - .name = "buffalo:red:diag", - .gpio = 1, - .active_low = 1, - }, -}; - -static struct gpio_led wzrhpag300h_wmac0_leds_gpio[] = { - { - .name = "buffalo:amber:band2g", - .gpio = 1, - .active_low = 1, - }, - { - .name = "buffalo:green:usb", - .gpio = 3, - .active_low = 1, - }, - { - .name = "buffalo:green:band2g", - .gpio = 5, - .active_low = 1, - }, -}; - -static struct gpio_led wzrhpag300h_wmac1_leds_gpio[] = { - { - .name = "buffalo:green:band5g", - .gpio = 1, - .active_low = 1, - }, - { - .name = "buffalo:green:router", - .gpio = 3, - .active_low = 1, - }, - { - .name = "buffalo:blue:movie_engine", - .gpio = 4, - .active_low = 1, - }, - { - .name = "buffalo:amber:band5g", - .gpio = 5, - .active_low = 1, - }, -}; - -static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 11, - .active_low = 1, - }, { - .desc = "usb", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 3, - .active_low = 1, - }, { - .desc = "aoss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 5, - .active_low = 1, - }, { - .desc = "router_auto", - .type = EV_SW, - .code = BTN_6, - .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 6, - .active_low = 1, - }, { - .desc = "router_off", - .type = EV_SW, - .code = BTN_5, - .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 7, - .active_low = 1, - }, { - .desc = "movie_engine", - .type = EV_SW, - .code = BTN_7, - .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 8, - .active_low = 1, - } -}; - -static void __init wzrhpag300h_setup(void) -{ - u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000); - u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000); - u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET; - u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET; - - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 1); - - ath79_register_mdio(0, ~(BIT(0) | BIT(4))); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = BIT(4); - - ath79_register_eth(0); - ath79_register_eth(1); - - gpio_request_one(2, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio), - wzrhpag300h_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wzrhpag300h_gpio_keys), - wzrhpag300h_gpio_keys); - - ath79_register_m25p80_multi(&wzrhpag300h_flash_data); - - ap94_pci_init(eeprom1, mac1, eeprom2, mac2); - - ap9x_pci_setup_wmac_leds(0, wzrhpag300h_wmac0_leds_gpio, - ARRAY_SIZE(wzrhpag300h_wmac0_leds_gpio)); - ap9x_pci_setup_wmac_leds(1, wzrhpag300h_wmac1_leds_gpio, - ARRAY_SIZE(wzrhpag300h_wmac1_leds_gpio)); -} - -MIPS_MACHINE(ATH79_MACH_WZR_HP_AG300H, "WZR-HP-AG300H", - "Buffalo WZR-HP-AG300H/WZR-600DHP", wzrhpag300h_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh.c deleted file mode 100644 index 0a3eba9f77..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh.c +++ /dev/null @@ -1,279 +0,0 @@ -/* - * Buffalo WZR-HP-G300NH board support - * - * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/nxp_74hc153.h> -#include <linux/rtl8366.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define WZRHPG300NH_GPIO_LED_USB 0 -#define WZRHPG300NH_GPIO_LED_DIAG 1 -#define WZRHPG300NH_GPIO_LED_WIRELESS 6 -#define WZRHPG300NH_GPIO_LED_SECURITY 17 -#define WZRHPG300NH_GPIO_LED_ROUTER 18 - -#define WZRHPG300NH_GPIO_RTL8366_SDA 19 -#define WZRHPG300NH_GPIO_RTL8366_SCK 20 - -#define WZRHPG300NH_GPIO_74HC153_S0 9 -#define WZRHPG300NH_GPIO_74HC153_S1 11 -#define WZRHPG300NH_GPIO_74HC153_1Y 12 -#define WZRHPG300NH_GPIO_74HC153_2Y 14 - -#define WZRHPG300NH_GPIO_EXP_BASE 32 -#define WZRHPG300NH_GPIO_BTN_AOSS (WZRHPG300NH_GPIO_EXP_BASE + 0) -#define WZRHPG300NH_GPIO_BTN_RESET (WZRHPG300NH_GPIO_EXP_BASE + 1) -#define WZRHPG300NH_GPIO_BTN_ROUTER_ON (WZRHPG300NH_GPIO_EXP_BASE + 2) -#define WZRHPG300NH_GPIO_BTN_QOS_ON (WZRHPG300NH_GPIO_EXP_BASE + 3) -#define WZRHPG300NH_GPIO_BTN_USB (WZRHPG300NH_GPIO_EXP_BASE + 5) -#define WZRHPG300NH_GPIO_BTN_ROUTER_AUTO (WZRHPG300NH_GPIO_EXP_BASE + 6) -#define WZRHPG300NH_GPIO_BTN_QOS_OFF (WZRHPG300NH_GPIO_EXP_BASE + 7) - -#define WZRHPG300NH_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH_KEYS_POLL_INTERVAL) - -#define WZRHPG300NH_MAC_OFFSET 0x20c - -static struct mtd_partition wzrhpg300nh_flash_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x0040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x0040000, - .size = 0x0020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x0060000, - .size = 0x1f60000, - }, { - .name = "user_property", - .offset = 0x1fc0000, - .size = 0x0020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "art", - .offset = 0x1fe0000, - .size = 0x0020000, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct physmap_flash_data wzrhpg300nh_flash_data = { - .width = 2, - .parts = wzrhpg300nh_flash_partitions, - .nr_parts = ARRAY_SIZE(wzrhpg300nh_flash_partitions), -}; - -#define WZRHPG300NH_FLASH_BASE 0x1e000000 -#define WZRHPG300NH_FLASH_SIZE (32 * 1024 * 1024) - -static struct resource wzrhpg300nh_flash_resources[] = { - [0] = { - .start = WZRHPG300NH_FLASH_BASE, - .end = WZRHPG300NH_FLASH_BASE + WZRHPG300NH_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device wzrhpg300nh_flash_device = { - .name = "physmap-flash", - .id = -1, - .resource = wzrhpg300nh_flash_resources, - .num_resources = ARRAY_SIZE(wzrhpg300nh_flash_resources), - .dev = { - .platform_data = &wzrhpg300nh_flash_data, - } -}; - -static struct gpio_led wzrhpg300nh_leds_gpio[] __initdata = { - { - .name = "buffalo:orange:security", - .gpio = WZRHPG300NH_GPIO_LED_SECURITY, - .active_low = 1, - }, { - .name = "buffalo:green:wireless", - .gpio = WZRHPG300NH_GPIO_LED_WIRELESS, - .active_low = 1, - }, { - .name = "buffalo:green:router", - .gpio = WZRHPG300NH_GPIO_LED_ROUTER, - .active_low = 1, - }, { - .name = "buffalo:red:diag", - .gpio = WZRHPG300NH_GPIO_LED_DIAG, - .active_low = 1, - }, { - .name = "buffalo:blue:usb", - .gpio = WZRHPG300NH_GPIO_LED_USB, - .active_low = 1, - } -}; - -static struct gpio_keys_button wzrhpg300nh_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "aoss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_AOSS, - .active_low = 1, - }, { - .desc = "usb", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_USB, - .active_low = 1, - }, { - .desc = "qos_on", - .type = EV_KEY, - .code = BTN_3, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_QOS_ON, - .active_low = 0, - }, { - .desc = "qos_off", - .type = EV_KEY, - .code = BTN_4, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_QOS_OFF, - .active_low = 0, - }, { - .desc = "router_on", - .type = EV_KEY, - .code = BTN_5, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_ON, - .active_low = 0, - }, { - .desc = "router_auto", - .type = EV_KEY, - .code = BTN_6, - .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, - .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_AUTO, - .active_low = 0, - } -}; - -static struct nxp_74hc153_platform_data wzrhpg300nh_74hc153_data = { - .gpio_base = WZRHPG300NH_GPIO_EXP_BASE, - .gpio_pin_s0 = WZRHPG300NH_GPIO_74HC153_S0, - .gpio_pin_s1 = WZRHPG300NH_GPIO_74HC153_S1, - .gpio_pin_1y = WZRHPG300NH_GPIO_74HC153_1Y, - .gpio_pin_2y = WZRHPG300NH_GPIO_74HC153_2Y, -}; - -static struct platform_device wzrhpg300nh_74hc153_device = { - .name = NXP_74HC153_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &wzrhpg300nh_74hc153_data, - } -}; - -static struct rtl8366_platform_data wzrhpg300nh_rtl8366_data = { - .gpio_sda = WZRHPG300NH_GPIO_RTL8366_SDA, - .gpio_sck = WZRHPG300NH_GPIO_RTL8366_SCK, -}; - -static struct platform_device wzrhpg300nh_rtl8366s_device = { - .name = RTL8366S_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &wzrhpg300nh_rtl8366_data, - } -}; - -static struct platform_device wzrhpg300nh_rtl8366rb_device = { - .name = RTL8366RB_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &wzrhpg300nh_rtl8366_data, - } -}; - -static void __init wzrhpg300nh_setup(void) -{ - u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); - u8 *mac = eeprom + WZRHPG300NH_MAC_OFFSET; - bool hasrtl8366rb = false; - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - - if (rtl8366_smi_detect(&wzrhpg300nh_rtl8366_data) == RTL8366_TYPE_RB) - hasrtl8366rb = true; - - if (hasrtl8366rb) { - ath79_eth0_pll_data.pll_1000 = 0x1f000000; - ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev; - ath79_eth1_pll_data.pll_1000 = 0x100; - ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev; - } else { - ath79_eth0_pll_data.pll_1000 = 0x1e000100; - ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev; - ath79_eth1_pll_data.pll_1000 = 0x1e000100; - ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev; - } - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = 0x10; - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_usb(); - ath79_register_wmac(eeprom, NULL); - - platform_device_register(&wzrhpg300nh_74hc153_device); - platform_device_register(&wzrhpg300nh_flash_device); - - if (hasrtl8366rb) - platform_device_register(&wzrhpg300nh_rtl8366rb_device); - else - platform_device_register(&wzrhpg300nh_rtl8366s_device); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio), - wzrhpg300nh_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WZRHPG300NH_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wzrhpg300nh_gpio_keys), - wzrhpg300nh_gpio_keys); - -} - -MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH, "WZR-HP-G300NH", - "Buffalo WZR-HP-G300NH", wzrhpg300nh_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh2.c deleted file mode 100644 index c44a9cf770..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh2.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * Buffalo WZR-HP-G300NH2 board support - * - * Copyright (C) 2011 Felix Fietkau <nbd@nbd.name> - * Copyright (C) 2011 Mark Deneen <mdeneen@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define WZRHPG300NH2_MAC_OFFSET 0x20c -#define WZRHPG300NH2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH2_KEYS_POLL_INTERVAL) - -static struct mtd_partition wzrhpg300nh2_flash_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x0040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x0040000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "art", - .offset = 0x0050000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x0060000, - .size = 0x1f90000, - }, { - .name = "user_property", - .offset = 0x1ff0000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct flash_platform_data wzrhpg300nh2_flash_data = { - .parts = wzrhpg300nh2_flash_partitions, - .nr_parts = ARRAY_SIZE(wzrhpg300nh2_flash_partitions), -}; - -static struct gpio_led wzrhpg300nh2_leds_gpio[] __initdata = { - { - .name = "buffalo:red:diag", - .gpio = 16, - .active_low = 1, - }, -}; - -static struct gpio_led wzrhpg300nh2_wmac_leds_gpio[] = { - { - .name = "buffalo:blue:usb", - .gpio = 4, - .active_low = 1, - }, - { - .name = "buffalo:green:wireless", - .gpio = 5, - .active_low = 1, - }, - { - .name = "buffalo:orange:security", - .gpio = 6, - .active_low = 1, - }, - { - .name = "buffalo:green:router", - .gpio = 7, - .active_low = 1, - }, - { - .name = "buffalo:blue:movie_engine_on", - .gpio = 8, - .active_low = 1, - }, - { - .name = "buffalo:blue:movie_engine_off", - .gpio = 9, - .active_low = 1, - }, -}; - -/* The AOSS button is wmac gpio 12 */ -static struct gpio_keys_button wzrhpg300nh2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, - .gpio = 1, - .active_low = 1, - }, { - .desc = "usb", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, - .gpio = 7, - .active_low = 1, - }, { - .desc = "qos", - .type = EV_KEY, - .code = BTN_3, - .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, - .gpio = 11, - .active_low = 0, - }, { - .desc = "router_on", - .type = EV_KEY, - .code = BTN_5, - .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, - .gpio = 8, - .active_low = 0, - }, -}; - -static void __init wzrhpg300nh2_setup(void) -{ - - u8 *eeprom = (u8 *) KSEG1ADDR(0x1f051000); - u8 *mac0 = eeprom + WZRHPG300NH2_MAC_OFFSET; - /* There is an eth1 but it is not connected to the switch */ - - ath79_register_m25p80_multi(&wzrhpg300nh2_flash_data); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0); - ath79_register_mdio(0, ~(BIT(0))); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - - ath79_register_eth(0); - - /* gpio13 is usb power. Turn it on. */ - gpio_request_one(13, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh2_leds_gpio), - wzrhpg300nh2_leds_gpio); - ath79_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wzrhpg300nh2_gpio_keys), - wzrhpg300nh2_gpio_keys); - ap9x_pci_setup_wmac_leds(0, wzrhpg300nh2_wmac_leds_gpio, - ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio)); - - ap91_pci_init(eeprom, mac0); -} - -MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH2, "WZR-HP-G300NH2", - "Buffalo WZR-HP-G300NH2", wzrhpg300nh2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g450h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g450h.c deleted file mode 100644 index 5d235c49f4..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g450h.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - * Buffalo WZR-HP-G450G board support - * - * Copyright (C) 2011 Felix Fietkau <nbd@nbd.name> - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/ath9k_platform.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-m25p80.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define WZRHPG450H_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WZRHPG450H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG450H_KEYS_POLL_INTERVAL) - -static struct mtd_partition wzrhpg450h_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x0040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x0040000, - .size = 0x0010000, - }, { - .name = "ART", - .offset = 0x0050000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x0060000, - .size = 0x1f80000, - }, { - .name = "user_property", - .offset = 0x1fe0000, - .size = 0x0020000, - } -}; - -static struct flash_platform_data wzrhpg450h_flash_data = { - .parts = wzrhpg450h_partitions, - .nr_parts = ARRAY_SIZE(wzrhpg450h_partitions), -}; - -static struct gpio_led wzrhpg450h_leds_gpio[] __initdata = { - { - .name = "buffalo:red:diag", - .gpio = 14, - .active_low = 1, - }, - { - .name = "buffalo:orange:security", - .gpio = 13, - .active_low = 1, - }, -}; - - -static struct gpio_led wzrhpg450h_wmac_leds_gpio[] = { - { - .name = "buffalo:blue:movie_engine", - .gpio = 13, - .active_low = 1, - }, - { - .name = "buffalo:green:router", - .gpio = 14, - .active_low = 1, - }, - { - .name = "buffalo:green:wireless", - .gpio = 15, - .active_low = 1, - }, -}; - -static struct gpio_keys_button wzrhpg450h_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 6, - .active_low = 1, - }, { - .desc = "usb", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 1, - .active_low = 1, - }, { - .desc = "aoss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 8, - .active_low = 1, - }, { - .desc = "movie_engine", - .type = EV_KEY, - .code = BTN_6, - .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 7, - .active_low = 0, - }, { - .desc = "router_off", - .type = EV_KEY, - .code = BTN_5, - .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL, - .gpio = 12, - .active_low = 0, - } -}; - - -static void __init wzrhpg450h_init(void) -{ - u8 *ee = (u8 *) KSEG1ADDR(0x1f051000); - u8 *mac = (u8 *) ee + 2; - - ath79_register_m25p80_multi(&wzrhpg450h_flash_data); - - ath79_register_mdio(0, ~BIT(0)); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg450h_leds_gpio), - wzrhpg450h_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WZRHPG450H_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wzrhpg450h_gpio_keys), - wzrhpg450h_gpio_keys); - - ath79_register_eth(0); - - gpio_request_one(16, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); - ath79_register_usb(); - - ap91_pci_init(ee, NULL); - ap9x_pci_get_wmac_data(0)->tx_gain_buffalo = true; - ap9x_pci_get_wmac_data(1)->tx_gain_buffalo = true; - ap9x_pci_setup_wmac_leds(0, wzrhpg450h_wmac_leds_gpio, - ARRAY_SIZE(wzrhpg450h_wmac_leds_gpio)); -} - -MIPS_MACHINE(ATH79_MACH_WZR_HP_G450H, "WZR-HP-G450H", "Buffalo WZR-HP-G450H", - wzrhpg450h_init); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-z1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-z1.c deleted file mode 100644 index 912e9b2a6f..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-z1.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * Cisco Meraki Z1 board support - * - * Copyright (C) 2016 Chris Blake <chrisrblake93@gmail.com> - * Copyright (C) 2016 Christian Lamparter <chunkeey@googlemail.com> - * - * Based on Cisco Meraki GPL Release r23-20150601 Z1 Device Config - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> -#include <linux/platform/ar934x_nfc.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include <linux/leds-nu801.h> -#include <linux/firmware.h> -#include <linux/pci.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-nfc.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "dev-ap9x-pci.h" -#include "machtypes.h" - -#define Z1_GPIO_LED_POWER_ORANGE 17 - -#define Z1_GPIO_NU801_CKI 14 -#define Z1_GPIO_NU801_SDI 15 - -#define Z1_GPIO_XLNA0 18 -#define Z1_GPIO_XLNA1 19 - -#define Z1_GPIO_BTN_RESET 12 -#define Z1_KEYS_POLL_INTERVAL 20 /* msecs */ -#define Z1_KEYS_DEBOUNCE_INTERVAL (3 * Z1_KEYS_POLL_INTERVAL) - -#define Z1_ETH_SWITCH_PHY 0 - -static struct gpio_led Z1_leds_gpio[] __initdata = { - { - .name = "z1:orange:power", - .gpio = Z1_GPIO_LED_POWER_ORANGE, - .active_low = 1, - }, -}; - -static struct gpio_keys_button Z1_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = Z1_KEYS_DEBOUNCE_INTERVAL, - .gpio = Z1_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct led_nu801_template tricolor_led_template = { - .device_name = "z1", - .name = "tricolor", - .num_leds = 1, - .cki = Z1_GPIO_NU801_CKI, - .sdi = Z1_GPIO_NU801_SDI, - .lei = -1, - .ndelay = 500, - .init_brightness = { - LED_OFF, - LED_OFF, - LED_OFF, - }, - .default_trigger = "none", -}; - -static struct led_nu801_platform_data tricolor_led_data = { - .num_controllers = 1, - .template = &tricolor_led_template, -}; - -static struct platform_device tricolor_leds = { - .name = "leds-nu801", - .id = -1, - .dev.platform_data = &tricolor_led_data, -}; - -static struct ar8327_pad_cfg z1_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_platform_data z1_ar8327_data = { - .pad0_cfg = &z1_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info z1_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = Z1_ETH_SWITCH_PHY, - .platform_data = &z1_ar8327_data, - }, -}; - -static void __init z1_setup(void) -{ - /* NAND */ - ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_SOFT_BCH); - ath79_register_nfc(); - - /* Eth Config */ - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | - AR934X_ETH_CFG_SW_ONLY_MODE); - - /* MDIO Interface */ - ath79_register_mdio(1, 0x0); - ath79_register_mdio(0, 0x0); - mdiobus_register_board_info(z1_mdio0_info, - ARRAY_SIZE(z1_mdio0_info)); - - /* GMAC0 is connected to an AR8327 switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(Z1_ETH_SWITCH_PHY); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_register_eth(0); - - /* XLNA */ - ath79_wmac_set_ext_lna_gpio(0, Z1_GPIO_XLNA0); - ath79_wmac_set_ext_lna_gpio(1, Z1_GPIO_XLNA1); - - /* LEDs and Buttons */ - platform_device_register(&tricolor_leds); - ath79_register_leds_gpio(-1, ARRAY_SIZE(Z1_leds_gpio), - Z1_leds_gpio); - ath79_register_gpio_keys_polled(-1, Z1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(Z1_gpio_keys), - Z1_gpio_keys); - - /* USB */ - ath79_register_usb(); - - /* Wireless */ - ath79_register_wmac_simple(); - ap91_pci_init_simple(); -} -MIPS_MACHINE(ATH79_MACH_Z1, "Z1", "Meraki Z1", z1_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-zbt-we1526.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-zbt-we1526.c deleted file mode 100644 index 42bad11905..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-zbt-we1526.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * Zbtlink ZBT-WE1526 board support - * - * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com> - * - * Based on mach-dr531.c and mach-tl-wr841n-v9.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define ZBT_WE1526_GPIO_LED_STATUS 13 -#define ZBT_WE1526_GPIO_LED_LAN1 16 -#define ZBT_WE1526_GPIO_LED_LAN2 15 -#define ZBT_WE1526_GPIO_LED_LAN3 14 -#define ZBT_WE1526_GPIO_LED_LAN4 11 -#define ZBT_WE1526_GPIO_LED_WAN 4 -#define ZBT_WE1526_GPIO_LED_WLAN 12 - -#define ZBT_WE1526_GPIO_BTN_RESET 17 - -#define ZBT_WE1526_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ZBT_WE1526_KEYS_DEBOUNCE_INTERVAL \ - (3 * ZBT_WE1526_KEYS_POLL_INTERVAL) - -#define ZBT_WE1526_MAC0_OFFSET 0x0 -#define ZBT_WE1526_MAC1_OFFSET 0x6 -#define ZBT_WE1526_WMAC_CALDATA_OFFSET 0x1000 - -static struct gpio_led zbt_we1526_leds_gpio[] __initdata = { - { - .name = "zbt-we1526:green:status", - .gpio = ZBT_WE1526_GPIO_LED_STATUS, - .active_low = 1, - }, - { - .name = "zbt-we1526:green:lan1", - .gpio = ZBT_WE1526_GPIO_LED_LAN1, - .active_low = 1, - }, - { - .name = "zbt-we1526:green:lan2", - .gpio = ZBT_WE1526_GPIO_LED_LAN2, - .active_low = 1, - }, - { - .name = "zbt-we1526:green:lan3", - .gpio = ZBT_WE1526_GPIO_LED_LAN3, - .active_low = 1, - }, - { - .name = "zbt-we1526:green:lan4", - .gpio = ZBT_WE1526_GPIO_LED_LAN4, - .active_low = 1, - }, - { - .name = "zbt-we1526:green:wan", - .gpio = ZBT_WE1526_GPIO_LED_WAN, - .active_low = 1, - }, - { - .name = "zbt-we1526:green:wlan", - .gpio = ZBT_WE1526_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button zbt_we1526_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ZBT_WE1526_KEYS_DEBOUNCE_INTERVAL, - .gpio = ZBT_WE1526_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static void __init zbt_we1526_gpio_setup(void) -{ - /* For LED on GPIO4 */ - ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN); - ath79_gpio_output_select(ZBT_WE1526_GPIO_LED_WAN, 0); - - ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_STATUS, true); - ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_LAN1, true); - ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_LAN2, true); - ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_LAN3, true); - ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_LAN4, true); - ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_WAN, true); - ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_WLAN, true); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(zbt_we1526_leds_gpio), - zbt_we1526_leds_gpio); - - ath79_register_gpio_keys_polled(-1, ZBT_WE1526_KEYS_POLL_INTERVAL, - ARRAY_SIZE(zbt_we1526_gpio_keys), - zbt_we1526_gpio_keys); -} - -static void __init zbt_we1526_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(NULL); - - zbt_we1526_gpio_setup(); - - ath79_setup_ar933x_phy4_switch(false, false); - - ath79_register_mdio(0, 0x0); - - /* LAN */ - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_switch_data.phy_poll_mask |= BIT(4); - ath79_init_mac(ath79_eth1_data.mac_addr, - art + ZBT_WE1526_MAC0_OFFSET, 0); - ath79_register_eth(1); - - /* WAN */ - ath79_switch_data.phy4_mii_en = 1; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.speed = SPEED_100; - ath79_init_mac(ath79_eth0_data.mac_addr, - art + ZBT_WE1526_MAC1_OFFSET, 0); - ath79_register_eth(0); - - ath79_register_wmac(art + ZBT_WE1526_WMAC_CALDATA_OFFSET, NULL); - - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_ZBT_WE1526, "ZBT-WE1526", "Zbtlink ZBT-WE1526", - zbt_we1526_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c deleted file mode 100644 index bc79ab9953..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c +++ /dev/null @@ -1,154 +0,0 @@ -/* - * Zcomax ZCN-1523H-2-8/5-16 board support - * - * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-m25p80.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "machtypes.h" - -#define ZCN_1523H_GPIO_BTN_RESET 0 -#define ZCN_1523H_GPIO_LED_INIT 11 -#define ZCN_1523H_GPIO_LED_LAN1 17 - -#define ZCN_1523H_2_GPIO_LED_WEAK 13 -#define ZCN_1523H_2_GPIO_LED_MEDIUM 14 -#define ZCN_1523H_2_GPIO_LED_STRONG 15 - -#define ZCN_1523H_5_GPIO_LAN2_POWER 1 -#define ZCN_1523H_5_GPIO_LED_LAN2 13 -#define ZCN_1523H_5_GPIO_LED_WEAK 14 -#define ZCN_1523H_5_GPIO_LED_MEDIUM 15 -#define ZCN_1523H_5_GPIO_LED_STRONG 16 - -#define ZCN_1523H_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ZCN_1523H_KEYS_DEBOUNCE_INTERVAL (3 * ZCN_1523H_KEYS_POLL_INTERVAL) - -static struct gpio_keys_button zcn_1523h_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ZCN_1523H_KEYS_DEBOUNCE_INTERVAL, - .gpio = ZCN_1523H_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct gpio_led zcn_1523h_leds_gpio[] __initdata = { - { - .name = "zcn-1523h:amber:init", - .gpio = ZCN_1523H_GPIO_LED_INIT, - .active_low = 1, - }, { - .name = "zcn-1523h:green:lan1", - .gpio = ZCN_1523H_GPIO_LED_LAN1, - .active_low = 1, - } -}; - -static struct gpio_led zcn_1523h_2_leds_gpio[] __initdata = { - { - .name = "zcn-1523h:red:weak", - .gpio = ZCN_1523H_2_GPIO_LED_WEAK, - .active_low = 1, - }, { - .name = "zcn-1523h:amber:medium", - .gpio = ZCN_1523H_2_GPIO_LED_MEDIUM, - .active_low = 1, - }, { - .name = "zcn-1523h:green:strong", - .gpio = ZCN_1523H_2_GPIO_LED_STRONG, - .active_low = 1, - } -}; - -static struct gpio_led zcn_1523h_5_leds_gpio[] __initdata = { - { - .name = "zcn-1523h:red:weak", - .gpio = ZCN_1523H_5_GPIO_LED_WEAK, - .active_low = 1, - }, { - .name = "zcn-1523h:amber:medium", - .gpio = ZCN_1523H_5_GPIO_LED_MEDIUM, - .active_low = 1, - }, { - .name = "zcn-1523h:green:strong", - .gpio = ZCN_1523H_5_GPIO_LED_STRONG, - .active_low = 1, - }, { - .name = "zcn-1523h:green:lan2", - .gpio = ZCN_1523H_5_GPIO_LED_LAN2, - .active_low = 1, - } -}; - -static void __init zcn_1523h_generic_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0004); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | - AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(0, ARRAY_SIZE(zcn_1523h_leds_gpio), - zcn_1523h_leds_gpio); - - ath79_register_gpio_keys_polled(-1, ZCN_1523H_KEYS_POLL_INTERVAL, - ARRAY_SIZE(zcn_1523h_gpio_keys), - zcn_1523h_gpio_keys); - - ap91_pci_init(ee, mac); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - - ath79_register_mdio(0, 0x0); - - /* LAN1 port */ - ath79_register_eth(0); -} - -static void __init zcn_1523h_2_setup(void) -{ - zcn_1523h_generic_setup(); - ap9x_pci_setup_wmac_gpio(0, BIT(9), 0); - - ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_2_leds_gpio), - zcn_1523h_2_leds_gpio); -} - -MIPS_MACHINE(ATH79_MACH_ZCN_1523H_2, "ZCN-1523H-2", "Zcomax ZCN-1523H-2", - zcn_1523h_2_setup); - -static void __init zcn_1523h_5_setup(void) -{ - zcn_1523h_generic_setup(); - ap9x_pci_setup_wmac_gpio(0, BIT(8), 0); - - ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_5_leds_gpio), - zcn_1523h_5_leds_gpio); - - /* LAN2 port */ - ath79_register_eth(1); -} - -MIPS_MACHINE(ATH79_MACH_ZCN_1523H_5, "ZCN-1523H-5", "Zcomax ZCN-1523H-5", - zcn_1523h_5_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h deleted file mode 100644 index 900b4ec87b..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ /dev/null @@ -1,387 +0,0 @@ -/* - * Atheros AR71XX/AR724X/AR913X machine type definitions - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_MACHTYPE_H -#define _ATH79_MACHTYPE_H - -#include <asm/mips_machine.h> - -enum ath79_mach_type { - ATH79_MACH_GENERIC_OF = -1, /* Device tree board */ - ATH79_MACH_GENERIC = 0, - ATH79_MACH_A40, /* OpenMesh A40 */ - ATH79_MACH_A60, /* OpenMesh A60 */ - ATH79_MACH_WI2A_AC200I, /* Nokia WI2A-AC200i */ - ATH79_MACH_ALFA_AP120C, /* ALFA Network AP120C board */ - ATH79_MACH_ALFA_AP96, /* ALFA Network AP96 board */ - ATH79_MACH_ALFA_NX, /* ALFA Network N2/N5 board */ - ATH79_MACH_ALL0258N, /* Allnet ALL0258N */ - ATH79_MACH_ALL0305, /* Allnet ALL0305 */ - ATH79_MACH_ALL0315N, /* Allnet ALL0315N */ - ATH79_MACH_ANTMINER_S1, /* Antminer S1 */ - ATH79_MACH_ANTMINER_S3, /* Antminer S3 */ - ATH79_MACH_ANTROUTER_R1, /* Antrouter R1 */ - ATH79_MACH_AP121, /* Atheros AP121 reference board */ - ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ - ATH79_MACH_AP121F, /* ALFA Network AP121F */ - ATH79_MACH_AP132, /* Atheros AP132 reference board */ - ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */ - ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ - ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */ - ATH79_MACH_AP143, /* Atheros AP143 reference board */ - ATH79_MACH_AP147_010, /* Atheros AP147-010 reference board */ - ATH79_MACH_AP152, /* Atheros AP152 reference board */ - ATH79_MACH_AP531B0, /* Rockeetech AP531B0 */ - ATH79_MACH_AP90Q, /* YunCore AP80Q/AP90Q */ - ATH79_MACH_AP91_5G, /* ALFA Network AP91-5G */ - ATH79_MACH_AP96, /* Atheros AP96 */ - ATH79_MACH_ARCHER_C25_V1, /* TP-LINK Archer C25 V1 board */ - ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */ - ATH79_MACH_ARCHER_C58_V1, /* TP-LINK Archer C58 V1 board */ - ATH79_MACH_ARCHER_C59_V1, /* TP-LINK Archer C59 V1 board */ - ATH79_MACH_ARCHER_C59_V2, /* TP-LINK Archer C59 V2 board */ - ATH79_MACH_ARCHER_C60_V1, /* TP-LINK Archer C60 V1 board */ - ATH79_MACH_ARCHER_C60_V2, /* TP-LINK Archer C60 V2 board */ - ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */ - ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */ - ATH79_MACH_ARCHER_C7_V4, /* TP-LINK Archer C7 V4 board */ - ATH79_MACH_ARCHER_C7_V5, /* TP-LINK Archer C7 V5 board */ - ATH79_MACH_ARDUINO_YUN, /* Yun */ - ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */ - ATH79_MACH_BHR_4GRV2, /* Buffalo BHR-4GRV2 */ - ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */ - ATH79_MACH_BSB, /* Smart Electronics Black Swift board */ - ATH79_MACH_C55, /* AirTight Networks C-55 */ - ATH79_MACH_C60, /* AirTight Networks C-60 */ - ATH79_MACH_CAP324, /* PowerCloud Systems CAP324 */ - ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */ - ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */ - ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */ - ATH79_MACH_CF_E320N_V2, /* COMFAST CF-E320N v2 */ - ATH79_MACH_CF_E355AC, /* COMFAST CF-E355AC */ - ATH79_MACH_CF_E355AC_V2, /* COMFAST CF-E355AC v2*/ - ATH79_MACH_CF_E375AC, /* COMFAST CF-E375AC */ - ATH79_MACH_CF_E380AC_V1, /* COMFAST CF-E380AC v1 */ - ATH79_MACH_CF_E380AC_V2, /* COMFAST CF-E380AC v2 */ - ATH79_MACH_CF_E385AC, /* COMFAST CF-E385AC */ - ATH79_MACH_CF_E520N, /* COMFAST CF-E520N */ - ATH79_MACH_CF_E530N, /* COMFAST CF-E530N */ - ATH79_MACH_CPE210, /* TP-LINK CPE210 v1 */ - ATH79_MACH_CPE210_V2, /* TP-LINK CPE210 v2 */ - ATH79_MACH_CPE210_V3, /* TP-LINK CPE210 v3 */ - ATH79_MACH_CPE505N, /* P&W CPE505N */ - ATH79_MACH_CPE510, /* TP-LINK CPE510 */ - ATH79_MACH_CPE510_V2, /* TP-LINK CPE510 v2 */ - ATH79_MACH_CPE830, /* YunCore CPE830 */ - ATH79_MACH_CPE870, /* YunCore CPE870 */ - ATH79_MACH_CR3000, /* PowerCloud Systems CR3000 */ - ATH79_MACH_CR5000, /* PowerCloud Systems CR5000 */ - ATH79_MACH_DAP_1330_A1, /* D-Link DAP-1330 rev. A1 */ - ATH79_MACH_DAP_2695_A1, /* D-Link DAP-2695 rev. A1 */ - ATH79_MACH_DB120, /* Atheros DB120 reference board */ - ATH79_MACH_DGL_5500_A1, /* D-link DGL-5500 rev. A1 */ - ATH79_MACH_DHP_1565_A1, /* D-Link DHP-1565 rev. A1 */ - ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */ - ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ - ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ - ATH79_MACH_DIR_615_E1, /* D-Link DIR-615 rev. E1 */ - ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */ - ATH79_MACH_DIR_615_I1, /* D-Link DIR-615 rev. I1 */ - ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ - ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */ - ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */ - ATH79_MACH_DIR_869_A1, /* D-Link DIR-869 rev. A1 */ - ATH79_MACH_DLAN_HOTSPOT, /* devolo dLAN Hotspot */ - ATH79_MACH_DLAN_PRO_1200_AC, /* devolo dLAN pro 1200+ WiFi ac*/ - ATH79_MACH_DLAN_PRO_500_WP, /* devolo dLAN pro 500 Wireless+ */ - ATH79_MACH_DOMYWIFI_DW33D, /* DomyWifi DW33D */ - ATH79_MACH_DR342, /* Wallys DR342 */ - ATH79_MACH_DR344, /* Wallys DR344 */ - ATH79_MACH_DR531, /* Wallys DR531 */ - ATH79_MACH_DRAGINO2, /* Dragino Version 2 */ - ATH79_MACH_E1700AC_V2, /* Qxwlan E1700AC v2 */ - ATH79_MACH_E558_V2, /* Qxwlan E558 v2 */ - ATH79_MACH_E600G_V2, /* Qxwlan E600G v2 */ - ATH79_MACH_E600GAC_V2, /* Qxwlan E600GAC v2 */ - ATH79_MACH_E750A_V4, /* Qxwlan E750A v4 */ - ATH79_MACH_E750G_V8, /* Qxwlan E750G v8 */ - ATH79_MACH_EAP120, /* TP-LINK EAP120 */ - ATH79_MACH_EAP300V2, /* EnGenius EAP300 v2 */ - ATH79_MACH_EAP7660D, /* Senao EAP7660D */ - ATH79_MACH_EBR_2310_C1, /* D-link EBR-2310 rev. C1 */ - ATH79_MACH_EL_M150, /* EasyLink EL-M150 */ - ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */ - ATH79_MACH_ENS202EXT, /* EnGenius ENS202EXT */ - ATH79_MACH_EPG5000, /* EnGenius EPG5000 */ - ATH79_MACH_ESR1750, /* EnGenius ESR1750 */ - ATH79_MACH_ESR900, /* EnGenius ESR900 */ - ATH79_MACH_EW_BALIN, /* embedded wireless Balin Platform */ - ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ - ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */ - ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */ - ATH79_MACH_FRITZ300E, /* AVM FRITZ!WLAN Repeater 300E */ - ATH79_MACH_FRITZ4020, /* AVM FRITZ!Box 4020 */ - ATH79_MACH_FRITZ450E, /* AVM FRITZ!WLAN Repeater 450E */ - ATH79_MACH_GL_AR150, /* GL-AR150 support */ - ATH79_MACH_GL_AR300, /* GL-AR300 */ - ATH79_MACH_GL_AR300M, /* GL-AR300M */ - ATH79_MACH_GL_AR750, /* GL.iNet GL-AR750 */ - ATH79_MACH_GL_AR750S, /* GL.iNet GL-AR750S */ - ATH79_MACH_GL_DOMINO, /* Domino */ - ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */ - ATH79_MACH_GL_MIFI, /* GL-MIFI support */ - ATH79_MACH_GL_USB150, /* GL.iNet GL-USB150 */ - ATH79_MACH_GS_MINIBOX_V1, /* GainStrong MiniBox V1.0 */ - ATH79_MACH_GS_MINIBOX_V32, /* Gainstrong MiniBox V3.2 */ - ATH79_MACH_GS_OOLITE_V1, /* GainStrong Oolite V1.0 */ - ATH79_MACH_GS_OOLITE_V5_2, /* GainStrong Oolite V5.2 */ - ATH79_MACH_GS_OOLITE_V5_2_DEV, /* GainStrong Oolite V5.2-Dev */ - ATH79_MACH_HIVEAP_121, /* Aerohive HiveAP-121*/ - ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */ - ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */ - ATH79_MACH_JA76PF, /* jjPlus JA76PF */ - ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */ - ATH79_MACH_JWAP003, /* jjPlus JWAP003 */ - ATH79_MACH_JWAP230, /* jjPlus JWAP230 */ - ATH79_MACH_KOALA, /* OCEDO Koala */ - ATH79_MACH_LAN_TURTLE, /* Hak5 LAN Turtle */ - ATH79_MACH_LIMA, /* 8devices Lima */ - ATH79_MACH_MC_MAC1200R, /* MERCURY MAC1200R */ - ATH79_MACH_MR12, /* Cisco Meraki MR12 */ - ATH79_MACH_MR16, /* Cisco Meraki MR16 */ - ATH79_MACH_MR1750, /* OpenMesh MR1750 */ - ATH79_MACH_MR1750V2, /* OpenMesh MR1750v2 */ - ATH79_MACH_MR18, /* Cisco Meraki MR18 */ - ATH79_MACH_MR600, /* OpenMesh MR600 */ - ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */ - ATH79_MACH_MR900, /* OpenMesh MR900 */ - ATH79_MACH_MR900v2, /* OpenMesh MR900v2 */ - ATH79_MACH_MYNET_N600, /* WD My Net N600 */ - ATH79_MACH_MYNET_N750, /* WD My Net N750 */ - ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */ - ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */ - ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */ - ATH79_MACH_N5Q, /* ALFA Network N5Q */ - ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */ - ATH79_MACH_NBG6616, /* Zyxel NBG6616 */ - ATH79_MACH_NBG6716, /* Zyxel NBG6716 */ - ATH79_MACH_OM2P, /* OpenMesh OM2P */ - ATH79_MACH_OM2Pv2, /* OpenMesh OM2Pv2 */ - ATH79_MACH_OM2Pv4, /* OpenMesh OM2Pv4 */ - ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */ - ATH79_MACH_OM2P_HSv2, /* OpenMesh OM2P-HSv2 */ - ATH79_MACH_OM2P_HSv3, /* OpenMesh OM2P-HSv3 */ - ATH79_MACH_OM2P_HSv4, /* OpenMesh OM2P-HSv4 */ - ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */ - ATH79_MACH_OM5P, /* OpenMesh OM5P */ - ATH79_MACH_OM5P_AC, /* OpenMesh OM5P-AC */ - ATH79_MACH_OM5P_ACv2, /* OpenMesh OM5P-ACv2 */ - ATH79_MACH_OM5P_AN, /* OpenMesh OM5P-AN */ - ATH79_MACH_OMY_G1, /* OMYlink OMY-G1 */ - ATH79_MACH_OMY_X1, /* OMYlink OMY-X1 */ - ATH79_MACH_ONION_OMEGA, /* ONION OMEGA */ - ATH79_MACH_PACKET_SQUIRREL, /* Hak5 Packet Squirrel */ - ATH79_MACH_PB42, /* Atheros PB42 */ - ATH79_MACH_PB44, /* Atheros PB44 reference board */ - ATH79_MACH_PQI_AIR_PEN, /* PQI Air Pen */ - ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */ - ATH79_MACH_R36A, /* ALFA Network R36A */ - ATH79_MACH_R602N, /* P&W R602N */ - ATH79_MACH_R6100, /* NETGEAR R6100 */ - ATH79_MACH_RAMBUTAN, /* 8devices Rambutan */ - ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */ - ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */ - ATH79_MACH_RB_2011R5, /* Mikrotik RouterBOARD 2011UiAS(-2Hnd) */ - ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */ - ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ - ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */ - ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ - ATH79_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */ - ATH79_MACH_RB_435G, /* MikroTik RouterBOARD 435G */ - ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */ - ATH79_MACH_RB_450G, /* MikroTik RouterBOARD 450G */ - ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */ - ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */ - ATH79_MACH_RB_711GR100, /* Mikrotik RouterBOARD 911/912 boards */ - ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */ - ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */ - ATH79_MACH_RB_750UPR2, /* MikroTik RouterBOARD 750UP r2 */ - ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */ - ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */ - ATH79_MACH_RB_911L, /* Mikrotik RouterBOARD 911-2Hn/911-5Hn boards */ - ATH79_MACH_RB_922GS, /* Mikrotik RouterBOARD 911/922GS boards */ - ATH79_MACH_RB_931, /* MikroTik RouterBOARD 931-2nD */ - ATH79_MACH_RB_941, /* MikroTik RouterBOARD 941-2nD */ - ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */ - ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */ - ATH79_MACH_RB_952, /* MikroTik RouterBOARD 951Ui-2nD / 952Ui-5ac2nD */ - ATH79_MACH_RB_962, /* MikroTik RouterBOARD 962UiGS-5HacT2HnT */ - ATH79_MACH_RB_CAP, /* Mikrotik RouterBOARD cAP2nD */ - ATH79_MACH_RB_LHG5, /* Mikrotik RouterBOARD LHG5 */ - ATH79_MACH_RB_MAP, /* Mikrotik RouterBOARD mAP2nD */ - ATH79_MACH_RB_MAPL, /* Mikrotik RouterBOARD mAP L-2nD */ - ATH79_MACH_RB_WAP, /* Mikrotik RouterBOARD wAP2nD */ - ATH79_MACH_RB_WAPR, /* Mikrotik RouterBOARD wAPR2nD */ - ATH79_MACH_RB_WAPAC, /* Mikrotik RouterBOARD wAPG-5HacT2HnD */ - ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */ - ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */ - ATH79_MACH_RE355, /* TP-LINK RE355 */ - ATH79_MACH_RE450, /* TP-LINK RE450 */ - ATH79_MACH_RME_EG200, /* eTactica EG200 */ - ATH79_MACH_RUT9XX, /* Teltonika RUT900 series */ - ATH79_MACH_RW2458N, /* Redwave RW2458N */ - ATH79_MACH_SC1750, /* Abicom SC1750 */ - ATH79_MACH_SC300M, /* Abicom SC300M */ - ATH79_MACH_SC450, /* Abicom SC450 */ - ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */ - ATH79_MACH_SOM9331, /* OpenEmbed SOM9331 */ - ATH79_MACH_SR3200, /* YunCore SR3200 */ - ATH79_MACH_T830, /* YunCore T830 */ - ATH79_MACH_TELLSTICK_ZNET_LITE, /* TellStick ZNet Lite */ - ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ - ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */ - ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */ - ATH79_MACH_TEW_732BR, /* TRENDnet TEW-732BR */ - ATH79_MACH_TEW_823DRU, /* TRENDnet TEW-823DRU */ - ATH79_MACH_TL_MR10U, /* TP-LINK TL-MR10U */ - ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */ - ATH79_MACH_TL_MR13U, /* TP-LINK TL-MR13U */ - ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */ - ATH79_MACH_TL_MR3040, /* TP-LINK TL-MR3040 */ - ATH79_MACH_TL_MR3040_V2, /* TP-LINK TL-MR3040 v2 */ - ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */ - ATH79_MACH_TL_MR3220_V2, /* TP-LINK TL-MR3220 v2 */ - ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */ - ATH79_MACH_TL_MR3420_V2, /* TP-LINK TL-MR3420 v2 */ - ATH79_MACH_TL_MR6400, /* TP-LINK TL-MR6400 */ - ATH79_MACH_TL_WA701ND_V2, /* TP-LINK TL-WA701ND v2 */ - ATH79_MACH_TL_WA7210N_V2, /* TP-LINK TL-WA7210N v2 */ - ATH79_MACH_TL_WA750RE, /* TP-LINK TL-WA750RE */ - ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1 */ - ATH79_MACH_TL_WA801ND_V2, /* TP-LINK TL-WA801ND v2 */ - ATH79_MACH_TL_WA801ND_V3, /* TP-LINK TL-WA801ND v3 */ - ATH79_MACH_TL_WA830RE_V2, /* TP-LINK TL-WA830RE v2 */ - ATH79_MACH_TL_WA850RE, /* TP-LINK TL-WA850RE */ - ATH79_MACH_TL_WA850RE_V2, /* TP-LINK TL-WA850RE v2 */ - ATH79_MACH_TL_WA855RE_V1, /* TP-LINK TL-WA855RE v1 */ - ATH79_MACH_TL_WA860RE, /* TP-LINK TL-WA860RE */ - ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ - ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ - ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */ - ATH79_MACH_TL_WA901ND_V4, /* TP-LINK TL-WA901ND v4 */ - ATH79_MACH_TL_WA901ND_V5, /* TP-LINK TL-WA901ND v5 */ - ATH79_MACH_TL_WDR3320_V2, /* TP-LINK TL-WDR3320 v2 */ - ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */ - ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */ - ATH79_MACH_TL_WDR4900_V2, /* TP-LINK TL-WDR4900 v2 */ - ATH79_MACH_TL_WDR6500_V2, /* TP-LINK TL-WDR6500 v2 */ - ATH79_MACH_TL_WPA8630, /* TP-Link TL-WPA8630 */ - ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */ - ATH79_MACH_TL_WR1043N_V5, /* TP-LINK TL-WR1043N v5 */ - ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */ - ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */ - ATH79_MACH_TL_WR1043ND_V4, /* TP-LINK TL-WR1043ND v4 */ - ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */ - ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */ - ATH79_MACH_TL_WR710N, /* TP-LINK TL-WR710N */ - ATH79_MACH_TL_WR720N_V3, /* TP-LINK TL-WR720N v3/v4 */ - ATH79_MACH_TL_WR740N_V6, /* TP-LINK TL-WR740N/ND v6 */ - ATH79_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */ - ATH79_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4 */ - ATH79_MACH_TL_WR802N_V1, /* TP-LINK TL-WR802N v1 */ - ATH79_MACH_TL_WR802N_V2, /* TP-LINK TL-WR802N v2 */ - ATH79_MACH_TL_WR810N, /* TP-LINK TL-WR810N */ - ATH79_MACH_TL_WR810N_V2, /* TP-LINK TL-WR810N v2 */ - ATH79_MACH_TL_WR840N_V2, /* TP-LINK TL-WR840N v2 */ - ATH79_MACH_TL_WR840N_V3, /* TP-LINK TL-WR840N v3 */ - ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */ - ATH79_MACH_TL_WR841N_V11, /* TP-LINK TL-WR841N/ND v11 */ - ATH79_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */ - ATH79_MACH_TL_WR841N_V8, /* TP-LINK TL-WR841N/ND v8 */ - ATH79_MACH_TL_WR841N_V9, /* TP-LINK TL-WR841N/ND v9 */ - ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */ - ATH79_MACH_TL_WR842N_V3, /* TP-LINK TL-WR842N/ND v3 */ - ATH79_MACH_TL_WR902AC_V1, /* TP-LINK TL-WR902AC v1 */ - ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ - ATH79_MACH_TL_WR941ND_V5, /* TP-LINK TL-WR941ND v5 */ - ATH79_MACH_TL_WR941ND_V6, /* TP-LINK TL-WR941ND v6 */ - ATH79_MACH_TL_WR940N_V4, /* TP-LINK TL-WR940N v4 */ - ATH79_MACH_TL_WR940N_V6, /* TP-LINK TL-WR940N v6 */ - ATH79_MACH_TL_WR942N_V1, /* TP-LINK TL-WR942N v1 */ - ATH79_MACH_TS_D084, /* PISEN TS-D084 */ - ATH79_MACH_TUBE2H, /* Alfa Network Tube2H */ - ATH79_MACH_UBNT_AIRGW, /* Ubiquiti AirGateway */ - ATH79_MACH_UBNT_AIRGWP, /* Ubiquiti AirGateway Pro */ - ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ - ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ - ATH79_MACH_UBNT_BULLET_M_XW, /* Ubiquiti Bullet M XW */ - ATH79_MACH_UBNT_LBE_M5, /* Ubiquiti Litebeam M5 */ - ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */ - ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */ - ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */ - ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ - ATH79_MACH_UBNT_NANO_M_XW, /* Ubiquiti NanoStation M XW */ - ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ - ATH79_MACH_UBNT_ROCKET_M_TI, /* Ubiquiti Rocket M TI */ - ATH79_MACH_UBNT_ROCKET_M_XW, /* Ubiquiti Rocket M XW */ - ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */ - ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */ - ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */ - ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */ - ATH79_MACH_UBNT_UNIFIAC_LITE, /* Ubiquiti Unifi AC LITE/LR/MESH */ - ATH79_MACH_UBNT_UNIFIAC_PRO, /* Ubiquiti Unifi AC PRO/MESH PRO */ - ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */ - ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, /* Ubiquiti UnifiAP Outdoor+ */ - ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */ - ATH79_MACH_WAM250, /* Samsung WAM250 */ - ATH79_MACH_WBS210, /* TP-LINK WBS210 */ - ATH79_MACH_WBS510, /* TP-LINK WBS510 */ - ATH79_MACH_WEIO, /* WeIO board */ - ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */ - ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */ - ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */ - ATH79_MACH_WIFI_PINEAPPLE_NANO, /* Hak5 WiFi Pineapple NANO */ - ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */ - ATH79_MACH_WLR8100, /* SITECOM WLR-8100 */ - ATH79_MACH_WNDAP360, /* NETGEAR WNDAP360 */ - ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */ - ATH79_MACH_WNDR3700_V4, /* NETGEAR WNDR3700v4 */ - ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */ - ATH79_MACH_WNR1000_V2, /* NETGEAR WNR1000 v2 */ - ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */ - ATH79_MACH_WNR2000_V3, /* NETGEAR WNR2000 v3 */ - ATH79_MACH_WNR2000_V4, /* NETGEAR WNR2000 v4 */ - ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */ - ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */ - ATH79_MACH_WP543, /* Compex WP543 */ - ATH79_MACH_WPE72, /* Compex WPE72 */ - ATH79_MACH_WPJ342, /* Compex WPJ342 */ - ATH79_MACH_WPJ344, /* Compex WPJ344 */ - ATH79_MACH_WPJ531, /* Compex WPJ531 */ - ATH79_MACH_WPJ558, /* Compex WPJ558 */ - ATH79_MACH_WPJ563, /* Compex WPJ563 */ - ATH79_MACH_WPN824N, /* NETGEAR WPN824N */ - ATH79_MACH_WRT160NL, /* Linksys WRT160NL */ - ATH79_MACH_WRT400N, /* Linksys WRT400N */ - ATH79_MACH_WRTNODE2Q, /* WRTnode2Q */ - ATH79_MACH_WZR_450HP2, /* Buffalo WZR-450HP2 */ - ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */ - ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ - ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */ - ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */ - ATH79_MACH_XD3200, /* YunCore XD3200 */ - ATH79_MACH_Z1, /* Cisco Meraki Z1 */ - ATH79_MACH_ZBT_WE1526, /* Zbtlink ZBT-WE1526 */ - ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ - ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ -}; - -#endif /* _ATH79_MACHTYPE_H */ diff --git a/target/linux/ar71xx/files/arch/mips/ath79/nvram.c b/target/linux/ar71xx/files/arch/mips/ath79/nvram.c deleted file mode 100644 index a1de55fb19..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/nvram.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Atheros AR71xx minimal nvram support - * - * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/vmalloc.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/etherdevice.h> - -#include "nvram.h" - -char *ath79_nvram_find_var(const char *name, const char *buf, unsigned buf_len) -{ - unsigned len = strlen(name); - char *cur, *last; - - if (buf_len == 0 || len == 0) - return NULL; - - if (buf_len < len) - return NULL; - - if (len == 1) - return memchr(buf, (int) *name, buf_len); - - last = (char *) buf + buf_len - len; - for (cur = (char *) buf; cur <= last; cur++) - if (cur[0] == name[0] && memcmp(cur, name, len) == 0) - return cur + len; - - return NULL; -} - -int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len, - const char *name, char *mac) -{ - char *buf; - char *mac_str; - int ret; - int t; - - buf = vmalloc(nvram_len); - if (!buf) - return -ENOMEM; - - memcpy(buf, nvram, nvram_len); - buf[nvram_len - 1] = '\0'; - - mac_str = ath79_nvram_find_var(name, buf, nvram_len); - if (!mac_str) { - ret = -EINVAL; - goto free; - } - - if (strlen(mac_str) == 19 && mac_str[0] == '"' && mac_str[18] == '"') { - mac_str[18] = 0; - mac_str++; - } - - t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", - &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]); - - if (t != ETH_ALEN) - t = sscanf(mac_str, "%02hhx-%02hhx-%02hhx-%02hhx-%02hhx-%02hhx", - &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]); - - if (t != ETH_ALEN) { - ret = -EINVAL; - goto free; - } - - ret = 0; - -free: - vfree(buf); - return ret; -} diff --git a/target/linux/ar71xx/files/arch/mips/ath79/nvram.h b/target/linux/ar71xx/files/arch/mips/ath79/nvram.h deleted file mode 100644 index 75151d4a3c..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/nvram.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Atheros AR71xx minimal nvram support - * - * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_NVRAM_H -#define _ATH79_NVRAM_H - -char *ath79_nvram_find_var(const char *name, const char *buf, - unsigned buf_len); -int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len, - const char *name, char *mac); - -#endif /* _ATH79_NVRAM_H */ diff --git a/target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.c b/target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.c deleted file mode 100644 index 2202351806..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Atheros AP94 reference board PCI initialization - * - * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/pci.h> -#include <linux/delay.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -struct ath9k_fixup { - u16 *cal_data; - unsigned slot; -}; - -static int ath9k_num_fixups; -static struct ath9k_fixup ath9k_fixups[2]; - -static void ath9k_pci_fixup(struct pci_dev *dev) -{ - void __iomem *mem; - u16 *cal_data = NULL; - u16 cmd; - u32 bar0; - u32 val; - unsigned i; - - for (i = 0; i < ath9k_num_fixups; i++) { - if (ath9k_fixups[i].cal_data == NULL) - continue; - - if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn)) - continue; - - cal_data = ath9k_fixups[i].cal_data; - break; - } - - if (cal_data == NULL) - return; - - if (*cal_data != 0xa55a) { - pr_err("pci %s: invalid calibration data\n", pci_name(dev)); - return; - } - - pr_info("pci %s: fixup device configuration\n", pci_name(dev)); - - mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000); - if (!mem) { - pr_err("pci %s: ioremap error\n", pci_name(dev)); - return; - } - - pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0); - - switch (ath79_soc) { - case ATH79_SOC_AR7161: - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, - AR71XX_PCI_MEM_BASE); - break; - case ATH79_SOC_AR7240: - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0xffff); - break; - - case ATH79_SOC_AR7241: - case ATH79_SOC_AR7242: - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff); - break; - case ATH79_SOC_AR9344: - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff); - break; - - default: - BUG(); - } - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_write_config_word(dev, PCI_COMMAND, cmd); - - /* set pointer to first reg address */ - cal_data += 3; - while (*cal_data != 0xffff) { - u32 reg; - reg = *cal_data++; - val = *cal_data++; - val |= (*cal_data++) << 16; - - __raw_writel(val, mem + reg); - udelay(100); - } - - pci_read_config_dword(dev, PCI_VENDOR_ID, &val); - dev->vendor = val & 0xffff; - dev->device = (val >> 16) & 0xffff; - - pci_read_config_dword(dev, PCI_CLASS_REVISION, &val); - dev->revision = val & 0xff; - dev->class = val >> 8; /* upper 3 bytes */ - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); - pci_write_config_word(dev, PCI_COMMAND, cmd); - - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0); - - iounmap(mem); -} -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup); - -void __init pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) -{ - if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups)) - return; - - ath9k_fixups[ath9k_num_fixups].slot = slot; - ath9k_fixups[ath9k_num_fixups].cal_data = cal_data; - ath9k_num_fixups++; -} diff --git a/target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.h b/target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.h deleted file mode 100644 index 5794941f08..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _PCI_ATH9K_FIXUP -#define _PCI_ATH9K_FIXUP - -void pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) __init; - -#endif /* _PCI_ATH9K_FIXUP */ diff --git a/target/linux/ar71xx/files/arch/mips/ath79/routerboot.c b/target/linux/ar71xx/files/arch/mips/ath79/routerboot.c deleted file mode 100644 index 4c0cd1314a..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/routerboot.c +++ /dev/null @@ -1,354 +0,0 @@ -/* - * RouterBoot helper routines - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#define pr_fmt(fmt) "rb: " fmt - -#include <linux/kernel.h> -#include <linux/kobject.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/routerboot.h> -#include <linux/rle.h> -#include <linux/lzo.h> - -#include "routerboot.h" - -#define RB_BLOCK_SIZE 0x1000 -#define RB_ART_SIZE 0x10000 -#define RB_MAGIC_ERD 0x00455244 /* extended radio data */ - -static struct rb_info rb_info; - -static u32 get_u32(void *buf) -{ - u8 *p = buf; - - return ((u32) p[3] + ((u32) p[2] << 8) + ((u32) p[1] << 16) + - ((u32) p[0] << 24)); -} - -static u16 get_u16(void *buf) -{ - u8 *p = buf; - - return (u16) p[1] + ((u16) p[0] << 8); -} - -__init int -routerboot_find_magic(u8 *buf, unsigned int buflen, u32 *offset, bool hard) -{ - u32 magic_ref = hard ? RB_MAGIC_HARD : RB_MAGIC_SOFT; - u32 magic; - u32 cur = *offset; - - while (cur < buflen) { - magic = get_u32(buf + cur); - if (magic == magic_ref) { - *offset = cur; - return 0; - } - - cur += 0x1000; - } - - return -ENOENT; -} - -__init int -routerboot_find_tag(u8 *buf, unsigned int buflen, u16 tag_id, - u8 **tag_data, u16 *tag_len) -{ - uint32_t magic; - bool align = false; - int ret; - - if (buflen < 4) - return -EINVAL; - - magic = get_u32(buf); - switch (magic) { - case RB_MAGIC_ERD: - align = true; - /* fall trough */ - case RB_MAGIC_HARD: - /* skip magic value */ - buf += 4; - buflen -= 4; - break; - - case RB_MAGIC_SOFT: - if (buflen < 8) - return -EINVAL; - - /* skip magic and CRC value */ - buf += 8; - buflen -= 8; - - break; - - default: - return -EINVAL; - } - - ret = -ENOENT; - while (buflen > 2) { - u16 id; - u16 len; - - len = get_u16(buf); - buf += 2; - buflen -= 2; - - if (buflen < 2) - break; - - id = get_u16(buf); - buf += 2; - buflen -= 2; - - if (id == RB_ID_TERMINATOR) - break; - - if (buflen < len) - break; - - if (id == tag_id) { - if (tag_len) - *tag_len = len; - if (tag_data) - *tag_data = buf; - ret = 0; - break; - } - - if (align) - len = (len + 3) / 4; - - buf += len; - buflen -= len; - } - - return ret; -} - -static inline int -rb_find_hard_cfg_tag(u16 tag_id, u8 **tag_data, u16 *tag_len) -{ - if (!rb_info.hard_cfg_data || - !rb_info.hard_cfg_size) - return -ENOENT; - - return routerboot_find_tag(rb_info.hard_cfg_data, - rb_info.hard_cfg_size, - tag_id, tag_data, tag_len); -} - -__init const char * -rb_get_board_name(void) -{ - u16 tag_len; - u8 *tag; - int err; - - err = rb_find_hard_cfg_tag(RB_ID_BOARD_NAME, &tag, &tag_len); - if (err) - return NULL; - - return tag; -} - -__init u32 -rb_get_hw_options(void) -{ - u16 tag_len; - u8 *tag; - int err; - - err = rb_find_hard_cfg_tag(RB_ID_HW_OPTIONS, &tag, &tag_len); - if (err) - return 0; - - return get_u32(tag); -} - -static void * __init -__rb_get_wlan_data(u16 id) -{ - u16 tag_len; - u8 *tag; - void *buf; - int err; - u32 magic; - size_t src_done; - size_t dst_done; - - err = rb_find_hard_cfg_tag(RB_ID_WLAN_DATA, &tag, &tag_len); - if (err) { - pr_err("no calibration data found\n"); - goto err; - } - - buf = kmalloc(RB_ART_SIZE, GFP_KERNEL); - if (buf == NULL) { - pr_err("no memory for calibration data\n"); - goto err; - } - - magic = get_u32(tag); - if (magic == RB_MAGIC_ERD) { - u8 *erd_data; - u16 erd_len; - - err = routerboot_find_tag(tag, tag_len, 0x1, - &erd_data, &erd_len); - if (err) { - pr_err("no ERD data found for id %u\n", id); - goto err_free; - } - - dst_done = RB_ART_SIZE; - err = lzo1x_decompress_safe(erd_data, erd_len, buf, &dst_done); - if (err) { - pr_err("unable to decompress calibration data %d\n", - err); - goto err_free; - } - } else { - err = rle_decode((char *) tag, tag_len, buf, RB_ART_SIZE, - &src_done, &dst_done); - if (err) { - pr_err("unable to decode calibration data\n"); - goto err_free; - } - } - - return buf; - -err_free: - kfree(buf); -err: - return NULL; -} - -__init void * -rb_get_wlan_data(void) -{ - return __rb_get_wlan_data(0); -} - -__init void * -rb_get_ext_wlan_data(u16 id) -{ - return __rb_get_wlan_data(id); -} - -__init const struct rb_info * -rb_init_info(void *data, unsigned int size) -{ - unsigned int offset; - - if (size == 0 || (size % RB_BLOCK_SIZE) != 0) - return NULL; - - for (offset = 0; offset < size; offset += RB_BLOCK_SIZE) { - u32 magic; - - magic = get_u32(data + offset); - switch (magic) { - case RB_MAGIC_HARD: - rb_info.hard_cfg_offs = offset; - break; - - case RB_MAGIC_SOFT: - rb_info.soft_cfg_offs = offset; - break; - } - } - - if (!rb_info.hard_cfg_offs) { - pr_err("could not find a valid RouterBOOT hard config\n"); - return NULL; - } - - if (!rb_info.soft_cfg_offs) { - pr_err("could not find a valid RouterBOOT soft config\n"); - return NULL; - } - - rb_info.hard_cfg_size = RB_BLOCK_SIZE; - rb_info.hard_cfg_data = kmemdup(data + rb_info.hard_cfg_offs, - RB_BLOCK_SIZE, GFP_KERNEL); - if (!rb_info.hard_cfg_data) - return NULL; - - rb_info.board_name = rb_get_board_name(); - rb_info.hw_options = rb_get_hw_options(); - - return &rb_info; -} - -#if 0 -static char *rb_ext_wlan_data; - -static ssize_t -rb_ext_wlan_data_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, char *buf, - loff_t off, size_t count) -{ - if (off + count > attr->size) - return -EFBIG; - - memcpy(buf, &rb_ext_wlan_data[off], count); - - return count; -} - -static const struct bin_attribute rb_ext_wlan_data_attr = { - .attr = { - .name = "ext_wlan_data", - .mode = S_IRUSR | S_IWUSR, - }, - .read = rb_ext_wlan_data_read, - .size = RB_ART_SIZE, -}; - -static int __init rb_sysfs_init(void) -{ - struct kobject *rb_kobj; - int ret; - - rb_ext_wlan_data = rb_get_ext_wlan_data(1); - if (rb_ext_wlan_data == NULL) - return -ENOENT; - - rb_kobj = kobject_create_and_add("routerboot", firmware_kobj); - if (rb_kobj == NULL) { - ret = -ENOMEM; - pr_err("unable to create sysfs entry\n"); - goto err_free_wlan_data; - } - - ret = sysfs_create_bin_file(rb_kobj, &rb_ext_wlan_data_attr); - if (ret) { - pr_err("unable to create sysfs file, %d\n", ret); - goto err_put_kobj; - } - - return 0; - -err_put_kobj: - kobject_put(rb_kobj); -err_free_wlan_data: - kfree(rb_ext_wlan_data); - return ret; -} - -late_initcall(rb_sysfs_init); -#endif diff --git a/target/linux/ar71xx/files/arch/mips/ath79/routerboot.h b/target/linux/ar71xx/files/arch/mips/ath79/routerboot.h deleted file mode 100644 index cf189362d6..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/routerboot.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * RouterBoot definitions - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_ROUTERBOOT_H_ -#define _ATH79_ROUTERBOOT_H_ - -struct rb_info { - unsigned int hard_cfg_offs; - unsigned int hard_cfg_size; - void *hard_cfg_data; - unsigned int soft_cfg_offs; - - const char *board_name; - u32 hw_options; -}; - -/* Bit definitions for hardware options */ -#define RB_HW_OPT_UART_ABSENT BIT(0) -#define RB_HW_OPT_HAS_VOLTAGE BIT(1) -#define RB_HW_OPT_HAS_USB BIT(2) -#define RB_HW_OPT_HAS_ATTINY BIT(3) -#define RB_HW_OPT_NO_NAND BIT(14) -#define RB_HW_OPT_HAS_LCD BIT(15) -#define RB_HW_OPT_HAS_POE_OUT BIT(16) -#define RB_HW_OPT_HAS_uSD BIT(17) -#define RB_HW_OPT_HAS_SFP BIT(20) -#define RB_HW_OPT_HAS_WIFI BIT(21) -#define RB_HW_OPT_HAS_TS_FOR_ADC BIT(22) -#define RB_HW_OPT_HAS_PLC BIT(29) - -static inline bool -rb_hw_option_match(const struct rb_info *info, u32 mask, u32 val) -{ - return (info->hw_options & (val | mask)) == val; -} - -static inline bool -rb_has_hw_option(const struct rb_info *info, u32 mask) -{ - return rb_hw_option_match(info, mask, mask); -} - -#ifdef CONFIG_ATH79_ROUTERBOOT -const struct rb_info *rb_init_info(void *data, unsigned int size); -void *rb_get_wlan_data(void); -void *rb_get_ext_wlan_data(u16 id); - -int routerboot_find_tag(u8 *buf, unsigned int buflen, u16 tag_id, - u8 **tag_data, u16 *tag_len); -int routerboot_find_magic(u8 *buf, unsigned int buflen, u32 *offset, bool hard); -#else -static inline const struct rb_info * -rb_init_info(void *data, unsigned int size) -{ - return NULL; -} - -static inline void *rb_get_wlan_data(void) -{ - return NULL; -} - -static inline void *rb_get_wlan_data(u16 id) -{ - return NULL; -} - -static inline int -routerboot_find_tag(u8 *buf, unsigned int buflen, u16 tag_id, - u8 **tag_data, u16 *tag_len) -{ - return -ENOENT; -} - -static inline int -routerboot_find_magic(u8 *buf, unsigned int buflen, u32 *offset, bool hard) -{ - return -ENOENT; -} -#endif - -#endif /* _ATH79_ROUTERBOOT_H_ */ diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/fw/myloader/myloader.h b/target/linux/ar71xx/files/arch/mips/include/asm/fw/myloader/myloader.h deleted file mode 100644 index 8a99d566d7..0000000000 --- a/target/linux/ar71xx/files/arch/mips/include/asm/fw/myloader/myloader.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Compex's MyLoader specific definitions - * - * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _ASM_MIPS_FW_MYLOADER_H -#define _ASM_MIPS_FW_MYLOADER_H - -#include <linux/myloader.h> - -struct myloader_info { - uint32_t vid; - uint32_t did; - uint32_t svid; - uint32_t sdid; - uint8_t macs[MYLO_ETHADDR_COUNT][6]; -}; - -#ifdef CONFIG_MYLOADER -extern struct myloader_info *myloader_get_info(void) __init; -#else -static inline struct myloader_info *myloader_get_info(void) -{ - return NULL; -} -#endif /* CONFIG_MYLOADER */ - -#endif /* _ASM_MIPS_FW_MYLOADER_H */ diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h deleted file mode 100644 index e476d57e45..0000000000 --- a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Atheros AR71xx SoC specific platform data definitions - * - * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_ATH79_PLATFORM_H -#define __ASM_MACH_ATH79_PLATFORM_H - -#include <linux/if_ether.h> -#include <linux/skbuff.h> -#include <linux/phy.h> -#include <linux/spi/spi.h> - -struct ag71xx_switch_platform_data { - u8 phy4_mii_en:1; - u8 phy_poll_mask; -}; - -struct ag71xx_platform_data { - phy_interface_t phy_if_mode; - u32 phy_mask; - int speed; - int duplex; - u32 reset_bit; - u8 mac_addr[ETH_ALEN]; - struct device *mii_bus_dev; - - u8 has_gbit:1; - u8 is_ar91xx:1; - u8 is_ar7240:1; - u8 is_ar724x:1; - u8 has_ar8216:1; - u8 use_flow_control:1; - u8 enable_sgmii_fixup:1; - u8 disable_inline_checksum_engine:1; - - struct ag71xx_switch_platform_data *switch_data; - - void (*ddr_flush)(void); - void (*set_speed)(int speed); - void (*update_pll)(u32 pll_10, u32 pll_100, u32 pll_1000); - - unsigned int max_frame_len; - unsigned int desc_pktlen_mask; -}; - -struct ag71xx_mdio_platform_data { - u32 phy_mask; - u8 builtin_switch:1; - u8 is_ar7240:1; - u8 is_ar9330:1; - u8 is_ar934x:1; - unsigned long mdio_clock; - unsigned long ref_clock; - - void (*reset)(struct mii_bus *bus); -}; - -#endif /* __ASM_MACH_ATH79_PLATFORM_H */ diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/mach-rb750.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/mach-rb750.h deleted file mode 100644 index 50d5a20974..0000000000 --- a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/mach-rb750.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * MikroTik RouterBOARD 750 definitions - * - * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ -#ifndef _MACH_RB750_H -#define _MACH_RB750_H - -#include <linux/bitops.h> - -#define RB750_GPIO_LVC573_LE 0 /* Latch enable on LVC573 */ -#define RB750_GPIO_NAND_IO0 1 /* NAND I/O 0 */ -#define RB750_GPIO_NAND_IO1 2 /* NAND I/O 1 */ -#define RB750_GPIO_NAND_IO2 3 /* NAND I/O 2 */ -#define RB750_GPIO_NAND_IO3 4 /* NAND I/O 3 */ -#define RB750_GPIO_NAND_IO4 5 /* NAND I/O 4 */ -#define RB750_GPIO_NAND_IO5 6 /* NAND I/O 5 */ -#define RB750_GPIO_NAND_IO6 7 /* NAND I/O 6 */ -#define RB750_GPIO_NAND_IO7 8 /* NAND I/O 7 */ -#define RB750_GPIO_NAND_NCE 11 /* NAND Chip Enable (active low) */ -#define RB750_GPIO_NAND_RDY 12 /* NAND Ready */ -#define RB750_GPIO_NAND_CLE 14 /* NAND Command Latch Enable */ -#define RB750_GPIO_NAND_ALE 15 /* NAND Address Latch Enable */ -#define RB750_GPIO_NAND_NRE 16 /* NAND Read Enable (active low) */ -#define RB750_GPIO_NAND_NWE 17 /* NAND Write Enable (active low) */ - -#define RB750_GPIO_BTN_RESET 1 -#define RB750_GPIO_SPI_CS0 2 -#define RB750_GPIO_LED_ACT 12 -#define RB750_GPIO_LED_PORT1 13 -#define RB750_GPIO_LED_PORT2 14 -#define RB750_GPIO_LED_PORT3 15 -#define RB750_GPIO_LED_PORT4 16 -#define RB750_GPIO_LED_PORT5 17 - -#define RB750_LED_ACT BIT(RB750_GPIO_LED_ACT) -#define RB750_LED_PORT1 BIT(RB750_GPIO_LED_PORT1) -#define RB750_LED_PORT2 BIT(RB750_GPIO_LED_PORT2) -#define RB750_LED_PORT3 BIT(RB750_GPIO_LED_PORT3) -#define RB750_LED_PORT4 BIT(RB750_GPIO_LED_PORT4) -#define RB750_LED_PORT5 BIT(RB750_GPIO_LED_PORT5) -#define RB750_NAND_NCE BIT(RB750_GPIO_NAND_NCE) - -#define RB750_LVC573_LE BIT(RB750_GPIO_LVC573_LE) - -#define RB750_LED_BITS (RB750_LED_PORT1 | RB750_LED_PORT2 | RB750_LED_PORT3 | \ - RB750_LED_PORT4 | RB750_LED_PORT5 | RB750_LED_ACT) - -#define RB7XX_GPIO_NAND_NCE 0 -#define RB7XX_GPIO_MON 9 -#define RB7XX_GPIO_LED_ACT 11 -#define RB7XX_GPIO_USB_POWERON 13 - -#define RB7XX_NAND_NCE BIT(RB7XX_GPIO_NAND_NCE) -#define RB7XX_LED_ACT BIT(RB7XX_GPIO_LED_ACT) -#define RB7XX_MONITOR BIT(RB7XX_GPIO_MON) -#define RB7XX_USB_POWERON BIT(RB7XX_GPIO_USB_POWERON) - -struct rb750_led_data { - char *name; - char *default_trigger; - u32 mask; - int active_low; -}; - -struct rb750_led_platform_data { - int num_leds; - struct rb750_led_data *leds; - void (*latch_change)(u32 clear, u32 set); -}; - -struct rb7xx_nand_platform_data { - u32 nce_line; - - void (*enable_pins)(void); - void (*disable_pins)(void); - void (*latch_change)(u32, u32); -}; - -#endif /* _MACH_RB750_H */
\ No newline at end of file diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h deleted file mode 100644 index 37512ba1a1..0000000000 --- a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * SPI driver definitions for the CPLD chip on the Mikrotik RB4xx boards - * - * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> - * - * This file was based on the patches for Linux 2.6.27.39 published by - * MikroTik for their RouterBoard 4xx series devices. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#define CPLD_GPIO_nLED1 0 -#define CPLD_GPIO_nLED2 1 -#define CPLD_GPIO_nLED3 2 -#define CPLD_GPIO_nLED4 3 -#define CPLD_GPIO_FAN 4 -#define CPLD_GPIO_ALE 5 -#define CPLD_GPIO_CLE 6 -#define CPLD_GPIO_nCE 7 -#define CPLD_GPIO_nLED5 8 - -#define CPLD_NUM_GPIOS 9 - -#define CPLD_CFG_nLED1 BIT(CPLD_GPIO_nLED1) -#define CPLD_CFG_nLED2 BIT(CPLD_GPIO_nLED2) -#define CPLD_CFG_nLED3 BIT(CPLD_GPIO_nLED3) -#define CPLD_CFG_nLED4 BIT(CPLD_GPIO_nLED4) -#define CPLD_CFG_FAN BIT(CPLD_GPIO_FAN) -#define CPLD_CFG_ALE BIT(CPLD_GPIO_ALE) -#define CPLD_CFG_CLE BIT(CPLD_GPIO_CLE) -#define CPLD_CFG_nCE BIT(CPLD_GPIO_nCE) -#define CPLD_CFG_nLED5 BIT(CPLD_GPIO_nLED5) - -struct rb4xx_cpld_platform_data { - unsigned gpio_base; -}; - -extern int rb4xx_cpld_change_cfg(unsigned mask, unsigned value); -extern int rb4xx_cpld_read(unsigned char *rx_buf, - unsigned cnt); -extern int rb4xx_cpld_write(const unsigned char *buf, unsigned count); diff --git a/target/linux/ar71xx/files/drivers/gpio/gpio-latch.c b/target/linux/ar71xx/files/drivers/gpio/gpio-latch.c deleted file mode 100644 index d911f6a2cb..0000000000 --- a/target/linux/ar71xx/files/drivers/gpio/gpio-latch.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * GPIO latch driver - * - * Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/slab.h> -#include <linux/platform_device.h> - -#include <linux/platform_data/gpio-latch.h> - -struct gpio_latch_chip { - struct gpio_chip gc; - - struct mutex mutex; - struct mutex latch_mutex; - bool latch_enabled; - int le_gpio; - bool le_active_low; - int *gpios; -}; - -static inline struct gpio_latch_chip *to_gpio_latch_chip(struct gpio_chip *gc) -{ - return container_of(gc, struct gpio_latch_chip, gc); -} - -static void gpio_latch_lock(struct gpio_latch_chip *glc, bool enable) -{ - mutex_lock(&glc->mutex); - - if (enable) - glc->latch_enabled = true; - - if (glc->latch_enabled) - mutex_lock(&glc->latch_mutex); -} - -static void gpio_latch_unlock(struct gpio_latch_chip *glc, bool disable) -{ - if (glc->latch_enabled) - mutex_unlock(&glc->latch_mutex); - - if (disable) - glc->latch_enabled = true; - - mutex_unlock(&glc->mutex); -} - -static int -gpio_latch_get(struct gpio_chip *gc, unsigned offset) -{ - struct gpio_latch_chip *glc = to_gpio_latch_chip(gc); - int ret; - - gpio_latch_lock(glc, false); - ret = gpio_get_value(glc->gpios[offset]); - gpio_latch_unlock(glc, false); - - return ret; -} - -static void -gpio_latch_set(struct gpio_chip *gc, unsigned offset, int value) -{ - struct gpio_latch_chip *glc = to_gpio_latch_chip(gc); - bool enable_latch = false; - bool disable_latch = false; - int gpio; - - gpio = glc->gpios[offset]; - - if (gpio == glc->le_gpio) { - enable_latch = value ^ glc->le_active_low; - disable_latch = !enable_latch; - } - - gpio_latch_lock(glc, enable_latch); - gpio_set_value(gpio, value); - gpio_latch_unlock(glc, disable_latch); -} - -static int -gpio_latch_direction_input(struct gpio_chip *gc, unsigned offset) -{ - struct gpio_latch_chip *glc = to_gpio_latch_chip(gc); - int ret; - - gpio_latch_lock(glc, false); - ret = gpio_direction_input(glc->gpios[offset]); - gpio_latch_unlock(glc, false); - - return ret; -} - -static int -gpio_latch_direction_output(struct gpio_chip *gc, unsigned offset, int value) -{ - struct gpio_latch_chip *glc = to_gpio_latch_chip(gc); - bool enable_latch = false; - bool disable_latch = false; - int gpio; - int ret; - - gpio = glc->gpios[offset]; - - if (gpio == glc->le_gpio) { - enable_latch = value ^ glc->le_active_low; - disable_latch = !enable_latch; - } - - gpio_latch_lock(glc, enable_latch); - ret = gpio_direction_output(gpio, value); - gpio_latch_unlock(glc, disable_latch); - - return ret; -} - -static int gpio_latch_probe(struct platform_device *pdev) -{ - struct gpio_latch_chip *glc; - struct gpio_latch_platform_data *pdata; - struct gpio_chip *gc; - int size; - int ret; - int i; - - pdata = dev_get_platdata(&pdev->dev); - if (!pdata) - return -EINVAL; - - if (pdata->le_gpio_index >= pdata->num_gpios || - !pdata->num_gpios || - !pdata->gpios) - return -EINVAL; - - for (i = 0; i < pdata->num_gpios; i++) { - int gpio = pdata->gpios[i]; - - ret = devm_gpio_request(&pdev->dev, gpio, - GPIO_LATCH_DRIVER_NAME); - if (ret) - return ret; - } - - glc = devm_kzalloc(&pdev->dev, sizeof(*glc), GFP_KERNEL); - if (!glc) - return -ENOMEM; - - mutex_init(&glc->mutex); - mutex_init(&glc->latch_mutex); - - size = pdata->num_gpios * sizeof(glc->gpios[0]); - glc->gpios = devm_kzalloc(&pdev->dev, size , GFP_KERNEL); - if (!glc->gpios) - return -ENOMEM; - - memcpy(glc->gpios, pdata->gpios, size); - - glc->le_gpio = glc->gpios[pdata->le_gpio_index]; - glc->le_active_low = pdata->le_active_low; - - gc = &glc->gc; - - gc->label = GPIO_LATCH_DRIVER_NAME; - gc->base = pdata->base; - gc->can_sleep = true; - gc->ngpio = pdata->num_gpios; - gc->get = gpio_latch_get; - gc->set = gpio_latch_set; - gc->direction_input = gpio_latch_direction_input, - gc->direction_output = gpio_latch_direction_output; - - platform_set_drvdata(pdev, glc); - - ret = gpiochip_add(&glc->gc); - if (ret) - return ret; - - return 0; -} - -static int gpio_latch_remove(struct platform_device *pdev) -{ - struct gpio_latch_chip *glc = platform_get_drvdata(pdev); - - gpiochip_remove(&glc->gc); - return 0; -} - - -static struct platform_driver gpio_latch_driver = { - .probe = gpio_latch_probe, - .remove = gpio_latch_remove, - .driver = { - .name = GPIO_LATCH_DRIVER_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init gpio_latch_init(void) -{ - return platform_driver_register(&gpio_latch_driver); -} - -postcore_initcall(gpio_latch_init); - -MODULE_DESCRIPTION("GPIO latch driver"); -MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:" GPIO_LATCH_DRIVER_NAME); diff --git a/target/linux/ar71xx/files/drivers/gpio/gpio-nxp-74hc153.c b/target/linux/ar71xx/files/drivers/gpio/gpio-nxp-74hc153.c deleted file mode 100644 index 82e6e943ff..0000000000 --- a/target/linux/ar71xx/files/drivers/gpio/gpio-nxp-74hc153.c +++ /dev/null @@ -1,243 +0,0 @@ -/* - * NXP 74HC153 - Dual 4-input multiplexer GPIO driver - * - * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/version.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/slab.h> -#include <linux/platform_device.h> -#include <linux/nxp_74hc153.h> - -#define NXP_74HC153_NUM_GPIOS 8 -#define NXP_74HC153_S0_MASK 0x1 -#define NXP_74HC153_S1_MASK 0x2 -#define NXP_74HC153_BANK_MASK 0x4 - -struct nxp_74hc153_chip { - struct device *parent; - struct gpio_chip gpio_chip; - struct mutex lock; -}; - -static struct nxp_74hc153_chip *gpio_to_nxp(struct gpio_chip *gc) -{ - return container_of(gc, struct nxp_74hc153_chip, gpio_chip); -} - -static int nxp_74hc153_direction_input(struct gpio_chip *gc, unsigned offset) -{ - return 0; -} - -static int nxp_74hc153_direction_output(struct gpio_chip *gc, - unsigned offset, int val) -{ - return -EINVAL; -} - -static int nxp_74hc153_get_value(struct gpio_chip *gc, unsigned offset) -{ - struct nxp_74hc153_chip *nxp; - struct nxp_74hc153_platform_data *pdata; - unsigned s0; - unsigned s1; - unsigned pin; - int ret; - - nxp = gpio_to_nxp(gc); - pdata = nxp->parent->platform_data; - - s0 = !!(offset & NXP_74HC153_S0_MASK); - s1 = !!(offset & NXP_74HC153_S1_MASK); - pin = (offset & NXP_74HC153_BANK_MASK) ? pdata->gpio_pin_2y - : pdata->gpio_pin_1y; - - mutex_lock(&nxp->lock); - gpio_set_value(pdata->gpio_pin_s0, s0); - gpio_set_value(pdata->gpio_pin_s1, s1); - ret = gpio_get_value(pin); - mutex_unlock(&nxp->lock); - - return ret; -} - -static void nxp_74hc153_set_value(struct gpio_chip *gc, - unsigned offset, int val) -{ - /* not supported */ -} - -static int nxp_74hc153_probe(struct platform_device *pdev) -{ - struct nxp_74hc153_platform_data *pdata; - struct nxp_74hc153_chip *nxp; - struct gpio_chip *gc; - int err; - - pdata = pdev->dev.platform_data; - if (pdata == NULL) { - dev_dbg(&pdev->dev, "no platform data specified\n"); - return -EINVAL; - } - - nxp = kzalloc(sizeof(struct nxp_74hc153_chip), GFP_KERNEL); - if (nxp == NULL) { - dev_err(&pdev->dev, "no memory for private data\n"); - return -ENOMEM; - } - - err = gpio_request(pdata->gpio_pin_s0, dev_name(&pdev->dev)); - if (err) { - dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n", - pdata->gpio_pin_s0, err); - goto err_free_nxp; - } - - err = gpio_request(pdata->gpio_pin_s1, dev_name(&pdev->dev)); - if (err) { - dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n", - pdata->gpio_pin_s1, err); - goto err_free_s0; - } - - err = gpio_request(pdata->gpio_pin_1y, dev_name(&pdev->dev)); - if (err) { - dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n", - pdata->gpio_pin_1y, err); - goto err_free_s1; - } - - err = gpio_request(pdata->gpio_pin_2y, dev_name(&pdev->dev)); - if (err) { - dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n", - pdata->gpio_pin_2y, err); - goto err_free_1y; - } - - err = gpio_direction_output(pdata->gpio_pin_s0, 0); - if (err) { - dev_err(&pdev->dev, - "unable to set direction of gpio %u, err=%d\n", - pdata->gpio_pin_s0, err); - goto err_free_2y; - } - - err = gpio_direction_output(pdata->gpio_pin_s1, 0); - if (err) { - dev_err(&pdev->dev, - "unable to set direction of gpio %u, err=%d\n", - pdata->gpio_pin_s1, err); - goto err_free_2y; - } - - err = gpio_direction_input(pdata->gpio_pin_1y); - if (err) { - dev_err(&pdev->dev, - "unable to set direction of gpio %u, err=%d\n", - pdata->gpio_pin_1y, err); - goto err_free_2y; - } - - err = gpio_direction_input(pdata->gpio_pin_2y); - if (err) { - dev_err(&pdev->dev, - "unable to set direction of gpio %u, err=%d\n", - pdata->gpio_pin_2y, err); - goto err_free_2y; - } - - nxp->parent = &pdev->dev; - mutex_init(&nxp->lock); - - gc = &nxp->gpio_chip; - - gc->direction_input = nxp_74hc153_direction_input; - gc->direction_output = nxp_74hc153_direction_output; - gc->get = nxp_74hc153_get_value; - gc->set = nxp_74hc153_set_value; - gc->can_sleep = 1; - - gc->base = pdata->gpio_base; - gc->ngpio = NXP_74HC153_NUM_GPIOS; - gc->label = dev_name(nxp->parent); -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) - gc->dev = nxp->parent; -#else - gc->parent = nxp->parent; -#endif - gc->owner = THIS_MODULE; - - err = gpiochip_add(&nxp->gpio_chip); - if (err) { - dev_err(&pdev->dev, "unable to add gpio chip, err=%d\n", err); - goto err_free_2y; - } - - platform_set_drvdata(pdev, nxp); - return 0; - -err_free_2y: - gpio_free(pdata->gpio_pin_2y); -err_free_1y: - gpio_free(pdata->gpio_pin_1y); -err_free_s1: - gpio_free(pdata->gpio_pin_s1); -err_free_s0: - gpio_free(pdata->gpio_pin_s0); -err_free_nxp: - kfree(nxp); - return err; -} - -static int nxp_74hc153_remove(struct platform_device *pdev) -{ - struct nxp_74hc153_chip *nxp = platform_get_drvdata(pdev); - struct nxp_74hc153_platform_data *pdata = pdev->dev.platform_data; - - if (nxp) { - gpiochip_remove(&nxp->gpio_chip); - gpio_free(pdata->gpio_pin_2y); - gpio_free(pdata->gpio_pin_1y); - gpio_free(pdata->gpio_pin_s1); - gpio_free(pdata->gpio_pin_s0); - - kfree(nxp); - platform_set_drvdata(pdev, NULL); - } - - return 0; -} - -static struct platform_driver nxp_74hc153_driver = { - .probe = nxp_74hc153_probe, - .remove = nxp_74hc153_remove, - .driver = { - .name = NXP_74HC153_DRIVER_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init nxp_74hc153_init(void) -{ - return platform_driver_register(&nxp_74hc153_driver); -} -subsys_initcall(nxp_74hc153_init); - -static void __exit nxp_74hc153_exit(void) -{ - platform_driver_unregister(&nxp_74hc153_driver); -} -module_exit(nxp_74hc153_exit); - -MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); -MODULE_DESCRIPTION("GPIO expander driver for NXP 74HC153"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:" NXP_74HC153_DRIVER_NAME); diff --git a/target/linux/ar71xx/files/drivers/leds/leds-nu801.c b/target/linux/ar71xx/files/drivers/leds/leds-nu801.c deleted file mode 100644 index 11e8927785..0000000000 --- a/target/linux/ar71xx/files/drivers/leds/leds-nu801.c +++ /dev/null @@ -1,396 +0,0 @@ -/* - * LED driver for NU801 - * - * Kevin Paul Herbert - * Copyright (c) 2012, Meraki, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/platform_device.h> -#include <linux/leds.h> -#include <linux/workqueue.h> -#include <linux/delay.h> -#include <linux/leds-nu801.h> - -#include <linux/gpio.h> -#include <linux/of_gpio.h> - -#define MAX_NAME_LENGTH 24 -#define NUM_COLORS 3 - -static const char * const led_nu801_colors[] = { "blue", "green", "red" }; - -struct led_nu801_led_data { - struct led_classdev cdev; - struct led_nu801_data *controller; - enum led_brightness level; - char name[MAX_NAME_LENGTH]; -}; - -struct led_nu801_data { - unsigned cki; - unsigned sdi; - int lei; - struct delayed_work work; - struct led_nu801_led_data *led_chain; - int num_leds; - const char *device_name; - const char *name; - u32 ndelay; - atomic_t pending; -}; - -static void led_nu801_work(struct work_struct *work) -{ - struct led_nu801_data *controller = - container_of(work, struct led_nu801_data, work.work); - struct led_nu801_led_data *led; - u16 bit; - u16 brightness; - int index; - - for (index = 0; index < controller->num_leds; index++) { - led = &controller->led_chain[index]; - brightness = led->level << 8; /* To do: gamma correction */ - for (bit = 0x8000; bit; bit = bit >> 1) { - gpio_set_value(controller->sdi, - (brightness & bit) != 0); - gpio_set_value(controller->cki, 1); - if (unlikely(((index == (controller->num_leds - 1)) && - (bit == 1) && - (controller->lei < 0)))) { - udelay(600); - } else { - ndelay(controller->ndelay); - } - gpio_set_value(controller->cki, 0); - ndelay(controller->ndelay); - } - } - if (controller->lei >= 0) { - gpio_set_value(controller->lei, 1); - ndelay(controller->ndelay); - gpio_set_value(controller->lei, 0); - } - atomic_set(&controller->pending, 1); -} - -static void led_nu801_set(struct led_classdev *led_cdev, - enum led_brightness value) -{ - struct led_nu801_led_data *led_dat = - container_of(led_cdev, struct led_nu801_led_data, cdev); - struct led_nu801_data *controller = led_dat->controller; - - if (led_dat->level != value) { - led_dat->level = value; - if (atomic_dec_and_test(&controller->pending)) - schedule_delayed_work(&led_dat->controller->work, - (HZ/1000) + 1); - } -} - -static int led_nu801_create(struct led_nu801_data *controller, - struct device *parent, - int index, - enum led_brightness brightness, -#ifdef CONFIG_LEDS_TRIGGERS - const char *default_trigger, -#endif - const char *color) -{ - struct led_nu801_led_data *led = &controller->led_chain[index]; - int ret; - - scnprintf(led->name, sizeof(led->name), "%s:%s:%s%d", - controller->device_name, color, controller->name, - (controller->num_leds - (index + 1)) / NUM_COLORS); - led->cdev.name = led->name; - led->cdev.brightness_set = led_nu801_set; -#ifdef CONFIG_LEDS_TRIGGERS - led->cdev.default_trigger = default_trigger; -#endif - led->level = brightness; - led->controller = controller; - ret = led_classdev_register(parent, &led->cdev); - if (ret < 0) - goto err; - - return 0; - -err: - kfree(led); - return ret; -} - -static int -led_nu801_create_chain(const struct led_nu801_template *template, - struct led_nu801_data *controller, - struct device *parent) -{ - int ret; - int index; - - controller->cki = template->cki; - controller->sdi = template->sdi; - controller->lei = template->lei; - controller->num_leds = template->num_leds * 3; - controller->device_name = template->device_name; - controller->name = template->name; - controller->ndelay = template->ndelay; - atomic_set(&controller->pending, 1); - - controller->led_chain = kzalloc(sizeof(struct led_nu801_led_data) * - controller->num_leds, GFP_KERNEL); - - if (!controller->led_chain) - return -ENOMEM; - - ret = gpio_request(controller->cki, template->name); - if (ret < 0) - goto err_free_chain; - - ret = gpio_request(controller->sdi, template->name); - if (ret < 0) - goto err_ret_cki; - - if (controller->lei >= 0) { - ret = gpio_request(controller->lei, template->name); - if (ret < 0) - goto err_ret_sdi; - ret = gpio_direction_output(controller->lei, 0); - if (ret < 0) - goto err_ret_lei; - } - - ret = gpio_direction_output(controller->cki, 0); - if (ret < 0) - goto err_ret_lei; - - ret = gpio_direction_output(controller->sdi, 0); - if (ret < 0) - goto err_ret_lei; - - for (index = 0; index < controller->num_leds; index++) { - ret = led_nu801_create(controller, parent, index, - template->init_brightness - [index % NUM_COLORS], -#ifdef CONFIG_LEDS_TRIGGERS - template->default_trigger, -#endif - template->led_colors[index % NUM_COLORS] ? - template->led_colors[index % NUM_COLORS] : - led_nu801_colors[index % NUM_COLORS]); - if (ret < 0) - goto err_ret_sdi; - } - - INIT_DELAYED_WORK(&controller->work, led_nu801_work); - schedule_delayed_work(&controller->work, 0); - - return 0; - -err_ret_lei: - if (controller->lei >= 0) - gpio_free(controller->lei); -err_ret_sdi: - gpio_free(controller->sdi); -err_ret_cki: - gpio_free(controller->cki); -err_free_chain: - kfree(controller->led_chain); - - return ret; -} - -static void led_nu801_delete_chain(struct led_nu801_data *controller) -{ - struct led_nu801_led_data *led_chain; - struct led_nu801_led_data *led; - int index; - int num_leds; - - led_chain = controller->led_chain; - controller->led_chain = 0; - num_leds = controller->num_leds; - controller->num_leds = 0; - cancel_delayed_work_sync(&controller->work); - - for (index = 0; index < num_leds; index++) { - led = &led_chain[index]; - led_classdev_unregister(&led->cdev); - } - - gpio_free(controller->cki); - gpio_free(controller->sdi); - if (controller->lei >= 0) - gpio_free(controller->lei); - - kfree(led_chain); -} - -static struct led_nu801_data * -leds_nu801_create_of(struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node, *child; - struct led_nu801_data *controllers; - int count = 0, ret; - int i = 0; - - for_each_child_of_node(np, child) - count++; - if (!count) - return NULL; - - controllers = kzalloc(sizeof(struct led_nu801_data) * count, - GFP_KERNEL); - if (!controllers) - return NULL; - - for_each_child_of_node(np, child) { - const char *state; - struct led_nu801_template template = {}; - struct device_node *colors; - int jj; - - template.cki = of_get_named_gpio_flags(child, "cki", 0, NULL); - template.sdi = of_get_named_gpio_flags(child, "sdi", 0, NULL); - if (of_find_property(child, "lei", NULL)) { - template.lei = of_get_named_gpio_flags(child, "lei", - 0, NULL); - } else { - template.lei = -1; - } - of_property_read_u32(child, "ndelay", &template.ndelay); - of_property_read_u32(child, "num_leds", &template.num_leds); - template.name = of_get_property(child, "label", NULL) ? : - child->name; - template.default_trigger = of_get_property(child, - "default-trigger", NULL); - - jj = 0; - for_each_child_of_node(child, colors) { - template.led_colors[jj] = of_get_property(colors, - "label", NULL); - state = of_get_property(colors, "state", NULL); - if (!strncmp(state, "off", 3)) - template.init_brightness[jj] = LED_OFF; - else if (!strncmp(state, "half", 4)) - template.init_brightness[jj] = LED_HALF; - else if (!strncmp(state, "full", 4)) - template.init_brightness[jj] = LED_FULL; - jj++; - } - - ret = led_nu801_create_chain(&template, - &controllers[i], - &pdev->dev); - if (ret < 0) - goto err; - i++; - } - - return controllers; - -err: - for (i = i - 1; i >= 0; i--) - led_nu801_delete_chain(&controllers[i]); - kfree(controllers); - return NULL; -} - -static int led_nu801_probe(struct platform_device *pdev) -{ - struct led_nu801_platform_data *pdata = pdev->dev.platform_data; - struct led_nu801_data *controllers; - int i, ret = 0; - - if (!(pdata && pdata->num_controllers)) { - controllers = leds_nu801_create_of(pdev); - if (!controllers) - return -ENODEV; - } - - controllers = kzalloc(sizeof(struct led_nu801_data) * - pdata->num_controllers, GFP_KERNEL); - if (!controllers) - return -ENOMEM; - - for (i = 0; i < pdata->num_controllers; i++) { - ret = led_nu801_create_chain(&pdata->template[i], - &controllers[i], - &pdev->dev); - if (ret < 0) - goto err; - } - - platform_set_drvdata(pdev, controllers); - - return 0; - -err: - for (i = i - 1; i >= 0; i--) - led_nu801_delete_chain(&controllers[i]); - - kfree(controllers); - - return ret; -} - -static int led_nu801_remove(struct platform_device *pdev) -{ - int i; - struct led_nu801_platform_data *pdata = pdev->dev.platform_data; - struct led_nu801_data *controllers; - - controllers = platform_get_drvdata(pdev); - - for (i = 0; i < pdata->num_controllers; i++) - led_nu801_delete_chain(&controllers[i]); - - kfree(controllers); - - return 0; -} - -static const struct of_device_id of_numen_leds_match[] = { - { .compatible = "numen,leds-nu801", }, - {}, -}; -MODULE_DEVICE_TABLE(of, of_pwm_leds_match); - -static struct platform_driver led_nu801_driver = { - .probe = led_nu801_probe, - .remove = led_nu801_remove, - .driver = { - .name = "leds-nu801", - .owner = THIS_MODULE, - .of_match_table = of_numen_leds_match, - }, -}; - -static int __init led_nu801_init(void) -{ - return platform_driver_register(&led_nu801_driver); -} - -static void __exit led_nu801_exit(void) -{ - platform_driver_unregister(&led_nu801_driver); -} - -module_init(led_nu801_init); -module_exit(led_nu801_exit); - -MODULE_AUTHOR("Kevin Paul Herbert <kph@meraki.net>"); -MODULE_DESCRIPTION("NU801 LED driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:leds-nu801"); diff --git a/target/linux/ar71xx/files/drivers/leds/leds-rb750.c b/target/linux/ar71xx/files/drivers/leds/leds-rb750.c deleted file mode 100644 index 79e98b4882..0000000000 --- a/target/linux/ar71xx/files/drivers/leds/leds-rb750.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * LED driver for the RouterBOARD 750 - * - * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/leds.h> -#include <linux/slab.h> - -#include <asm/mach-ath79/mach-rb750.h> - -#define DRV_NAME "leds-rb750" - -struct rb750_led_dev { - struct led_classdev cdev; - u32 mask; - int active_low; - void (*latch_change)(u32 clear, u32 set); -}; - -struct rb750_led_drvdata { - struct rb750_led_dev *led_devs; - int num_leds; -}; - -static inline struct rb750_led_dev *to_rbled(struct led_classdev *led_cdev) -{ - return (struct rb750_led_dev *)container_of(led_cdev, - struct rb750_led_dev, cdev); -} - -static void rb750_led_brightness_set(struct led_classdev *led_cdev, - enum led_brightness value) -{ - struct rb750_led_dev *rbled = to_rbled(led_cdev); - int level; - - level = (value == LED_OFF) ? 0 : 1; - level ^= rbled->active_low; - - if (level) - rbled->latch_change(0, rbled->mask); - else - rbled->latch_change(rbled->mask, 0); -} - -static int rb750_led_probe(struct platform_device *pdev) -{ - struct rb750_led_platform_data *pdata; - struct rb750_led_drvdata *drvdata; - int ret = 0; - int i; - - pdata = pdev->dev.platform_data; - if (!pdata) - return -EINVAL; - - drvdata = kzalloc(sizeof(struct rb750_led_drvdata) + - sizeof(struct rb750_led_dev) * pdata->num_leds, - GFP_KERNEL); - if (!drvdata) - return -ENOMEM; - - drvdata->num_leds = pdata->num_leds; - drvdata->led_devs = (struct rb750_led_dev *) &drvdata[1]; - - for (i = 0; i < drvdata->num_leds; i++) { - struct rb750_led_dev *rbled = &drvdata->led_devs[i]; - struct rb750_led_data *led_data = &pdata->leds[i]; - - rbled->cdev.name = led_data->name; - rbled->cdev.default_trigger = led_data->default_trigger; - rbled->cdev.brightness_set = rb750_led_brightness_set; - rbled->cdev.brightness = LED_OFF; - - rbled->mask = led_data->mask; - rbled->active_low = !!led_data->active_low; - rbled->latch_change = pdata->latch_change; - - ret = led_classdev_register(&pdev->dev, &rbled->cdev); - if (ret) - goto err; - } - - platform_set_drvdata(pdev, drvdata); - return 0; - -err: - for (i = i - 1; i >= 0; i--) - led_classdev_unregister(&drvdata->led_devs[i].cdev); - - kfree(drvdata); - return ret; -} - -static int rb750_led_remove(struct platform_device *pdev) -{ - struct rb750_led_drvdata *drvdata; - int i; - - drvdata = platform_get_drvdata(pdev); - for (i = 0; i < drvdata->num_leds; i++) - led_classdev_unregister(&drvdata->led_devs[i].cdev); - - kfree(drvdata); - return 0; -} - -static struct platform_driver rb750_led_driver = { - .probe = rb750_led_probe, - .remove = rb750_led_remove, - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, -}; - -MODULE_ALIAS("platform:leds-rb750"); - -static int __init rb750_led_init(void) -{ - return platform_driver_register(&rb750_led_driver); -} - -static void __exit rb750_led_exit(void) -{ - platform_driver_unregister(&rb750_led_driver); -} - -module_init(rb750_led_init); -module_exit(rb750_led_exit); - -MODULE_DESCRIPTION(DRV_NAME); -MODULE_DESCRIPTION("LED driver for the RouterBOARD 750"); -MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); -MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ar71xx/files/drivers/leds/leds-wndr3700-usb.c b/target/linux/ar71xx/files/drivers/leds/leds-wndr3700-usb.c deleted file mode 100644 index 6425b055da..0000000000 --- a/target/linux/ar71xx/files/drivers/leds/leds-wndr3700-usb.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * USB LED driver for the NETGEAR WNDR3700 - * - * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/leds.h> -#include <linux/module.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#define DRIVER_NAME "wndr3700-led-usb" - -static void wndr3700_usb_led_set(struct led_classdev *cdev, - enum led_brightness brightness) -{ - if (brightness) - ath79_device_reset_clear(AR71XX_RESET_GE1_PHY); - else - ath79_device_reset_set(AR71XX_RESET_GE1_PHY); -} - -static enum led_brightness wndr3700_usb_led_get(struct led_classdev *cdev) -{ - return ath79_device_reset_get(AR71XX_RESET_GE1_PHY) ? LED_OFF : LED_FULL; -} - -static struct led_classdev wndr3700_usb_led = { - .name = "netgear:green:usb", - .brightness_set = wndr3700_usb_led_set, - .brightness_get = wndr3700_usb_led_get, -}; - -static int wndr3700_usb_led_probe(struct platform_device *pdev) -{ - return led_classdev_register(&pdev->dev, &wndr3700_usb_led); -} - -static int wndr3700_usb_led_remove(struct platform_device *pdev) -{ - led_classdev_unregister(&wndr3700_usb_led); - return 0; -} - -static struct platform_driver wndr3700_usb_led_driver = { - .probe = wndr3700_usb_led_probe, - .remove = wndr3700_usb_led_remove, - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init wndr3700_usb_led_init(void) -{ - return platform_driver_register(&wndr3700_usb_led_driver); -} - -static void __exit wndr3700_usb_led_exit(void) -{ - platform_driver_unregister(&wndr3700_usb_led_driver); -} - -module_init(wndr3700_usb_led_init); -module_exit(wndr3700_usb_led_exit); - -MODULE_DESCRIPTION("USB LED driver for the NETGEAR WNDR3700"); -MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/target/linux/ar71xx/files/drivers/mtd/cybertan_part.c b/target/linux/ar71xx/files/drivers/mtd/cybertan_part.c deleted file mode 100644 index 4d33c19b7e..0000000000 --- a/target/linux/ar71xx/files/drivers/mtd/cybertan_part.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * Copyright (C) 2009 Christian Daniel <cd@maintech.de> - * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * TRX flash partition table. - * Based on ar7 map by Felix Fietkau <nbd@nbd.name> - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/vmalloc.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/version.h> - -struct cybertan_header { - char magic[4]; - u8 res1[4]; - char fw_date[3]; - char fw_ver[3]; - char id[4]; - char hw_ver; - char unused; - u8 flags[2]; - u8 res2[10]; -}; - -#define TRX_PARTS 6 -#define TRX_MAGIC 0x30524448 -#define TRX_MAX_OFFSET 3 - -struct trx_header { - uint32_t magic; /* "HDR0" */ - uint32_t len; /* Length of file including header */ - uint32_t crc32; /* 32-bit CRC from flag_version to end of file */ - uint32_t flag_version; /* 0:15 flags, 16:31 version */ - uint32_t offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */ -}; - -#define IH_MAGIC 0x27051956 /* Image Magic Number */ -#define IH_NMLEN 32 /* Image Name Length */ - -struct uimage_header { - uint32_t ih_magic; /* Image Header Magic Number */ - uint32_t ih_hcrc; /* Image Header CRC Checksum */ - uint32_t ih_time; /* Image Creation Timestamp */ - uint32_t ih_size; /* Image Data Size */ - uint32_t ih_load; /* Data» Load Address */ - uint32_t ih_ep; /* Entry Point Address */ - uint32_t ih_dcrc; /* Image Data CRC Checksum */ - uint8_t ih_os; /* Operating System */ - uint8_t ih_arch; /* CPU architecture */ - uint8_t ih_type; /* Image Type */ - uint8_t ih_comp; /* Compression Type */ - uint8_t ih_name[IH_NMLEN]; /* Image Name */ -}; - -struct firmware_header { - struct cybertan_header cybertan; - struct trx_header trx; - struct uimage_header uimage; -} __packed; - -#define UBOOT_LEN 0x40000 -#define ART_LEN 0x10000 -#define NVRAM_LEN 0x10000 - -static int cybertan_parse_partitions(struct mtd_info *master, -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) - struct mtd_partition **pparts, -#else - const struct mtd_partition **pparts, -#endif - struct mtd_part_parser_data *data) -{ - struct firmware_header *header; - struct trx_header *theader; - struct uimage_header *uheader; - struct mtd_partition *trx_parts; - size_t retlen; - unsigned int kernel_len; - unsigned int uboot_len; - unsigned int nvram_len; - unsigned int art_len; - int ret; - - uboot_len = max_t(unsigned int, master->erasesize, UBOOT_LEN); - nvram_len = max_t(unsigned int, master->erasesize, NVRAM_LEN); - art_len = max_t(unsigned int, master->erasesize, ART_LEN); - - trx_parts = kzalloc(TRX_PARTS * sizeof(struct mtd_partition), - GFP_KERNEL); - if (!trx_parts) { - ret = -ENOMEM; - goto out; - } - - header = vmalloc(sizeof(*header)); - if (!header) { - return -ENOMEM; - goto free_parts; - } - - ret = mtd_read(master, uboot_len, sizeof(*header), - &retlen, (void *) header); - if (ret) - goto free_hdr; - - if (retlen != sizeof(*header)) { - ret = -EIO; - goto free_hdr; - } - - theader = &header->trx; - if (le32_to_cpu(theader->magic) != TRX_MAGIC) { - printk(KERN_NOTICE "%s: no TRX header found\n", master->name); - goto free_hdr; - } - - uheader = &header->uimage; - if (uheader->ih_magic != IH_MAGIC) { - printk(KERN_NOTICE "%s: no uImage found\n", master->name); - goto free_hdr; - } - - kernel_len = le32_to_cpu(theader->offsets[1]) + - sizeof(struct cybertan_header); - - trx_parts[0].name = "u-boot"; - trx_parts[0].offset = 0; - trx_parts[0].size = uboot_len; - trx_parts[0].mask_flags = MTD_WRITEABLE; - - trx_parts[1].name = "kernel"; - trx_parts[1].offset = trx_parts[0].offset + trx_parts[0].size; - trx_parts[1].size = kernel_len; - trx_parts[1].mask_flags = 0; - - trx_parts[2].name = "rootfs"; - trx_parts[2].offset = trx_parts[1].offset + trx_parts[1].size; - trx_parts[2].size = master->size - uboot_len - nvram_len - art_len - - trx_parts[1].size; - trx_parts[2].mask_flags = 0; - - trx_parts[3].name = "nvram"; - trx_parts[3].offset = master->size - nvram_len - art_len; - trx_parts[3].size = nvram_len; - trx_parts[3].mask_flags = MTD_WRITEABLE; - - trx_parts[4].name = "art"; - trx_parts[4].offset = master->size - art_len; - trx_parts[4].size = art_len; - trx_parts[4].mask_flags = MTD_WRITEABLE; - - trx_parts[5].name = "firmware"; - trx_parts[5].offset = uboot_len; - trx_parts[5].size = master->size - uboot_len - nvram_len - art_len; - trx_parts[5].mask_flags = 0; - - vfree(header); - - *pparts = trx_parts; - return TRX_PARTS; - -free_hdr: - vfree(header); -free_parts: - kfree(trx_parts); -out: - return ret; -} - -static struct mtd_part_parser cybertan_parser = { - .owner = THIS_MODULE, - .parse_fn = cybertan_parse_partitions, - .name = "cybertan", -}; - -static int __init cybertan_parser_init(void) -{ - register_mtd_parser(&cybertan_parser); - - return 0; -} - -module_init(cybertan_parser_init); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Christian Daniel <cd@maintech.de>"); diff --git a/target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c b/target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c deleted file mode 100644 index 2e25c6b885..0000000000 --- a/target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c +++ /dev/null @@ -1,1591 +0,0 @@ -/* - * Driver for the built-in NAND controller of the Atheros AR934x SoCs - * - * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/version.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/dma-mapping.h> -#include <linux/mtd/mtd.h> -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0) -#include <linux/mtd/nand.h> -#else -#include <linux/mtd/rawnand.h> -#endif -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/slab.h> - -#include <linux/platform/ar934x_nfc.h> - -#define AR934X_NFC_REG_CMD 0x00 -#define AR934X_NFC_REG_CTRL 0x04 -#define AR934X_NFC_REG_STATUS 0x08 -#define AR934X_NFC_REG_INT_MASK 0x0c -#define AR934X_NFC_REG_INT_STATUS 0x10 -#define AR934X_NFC_REG_ECC_CTRL 0x14 -#define AR934X_NFC_REG_ECC_OFFSET 0x18 -#define AR934X_NFC_REG_ADDR0_0 0x1c -#define AR934X_NFC_REG_ADDR0_1 0x24 -#define AR934X_NFC_REG_ADDR1_0 0x20 -#define AR934X_NFC_REG_ADDR1_1 0x28 -#define AR934X_NFC_REG_SPARE_SIZE 0x30 -#define AR934X_NFC_REG_PROTECT 0x38 -#define AR934X_NFC_REG_LOOKUP_EN 0x40 -#define AR934X_NFC_REG_LOOKUP(_x) (0x44 + (_i) * 4) -#define AR934X_NFC_REG_DMA_ADDR 0x64 -#define AR934X_NFC_REG_DMA_COUNT 0x68 -#define AR934X_NFC_REG_DMA_CTRL 0x6c -#define AR934X_NFC_REG_MEM_CTRL 0x80 -#define AR934X_NFC_REG_DATA_SIZE 0x84 -#define AR934X_NFC_REG_READ_STATUS 0x88 -#define AR934X_NFC_REG_TIME_SEQ 0x8c -#define AR934X_NFC_REG_TIMINGS_ASYN 0x90 -#define AR934X_NFC_REG_TIMINGS_SYN 0x94 -#define AR934X_NFC_REG_FIFO_DATA 0x98 -#define AR934X_NFC_REG_TIME_MODE 0x9c -#define AR934X_NFC_REG_DMA_ADDR_OFFS 0xa0 -#define AR934X_NFC_REG_FIFO_INIT 0xb0 -#define AR934X_NFC_REG_GEN_SEQ_CTRL 0xb4 - -#define AR934X_NFC_CMD_CMD_SEQ_S 0 -#define AR934X_NFC_CMD_CMD_SEQ_M 0x3f -#define AR934X_NFC_CMD_SEQ_1C 0x00 -#define AR934X_NFC_CMD_SEQ_ERASE 0x0e -#define AR934X_NFC_CMD_SEQ_12 0x0c -#define AR934X_NFC_CMD_SEQ_1C1AXR 0x21 -#define AR934X_NFC_CMD_SEQ_S 0x24 -#define AR934X_NFC_CMD_SEQ_1C3AXR 0x27 -#define AR934X_NFC_CMD_SEQ_1C5A1CXR 0x2a -#define AR934X_NFC_CMD_SEQ_18 0x32 -#define AR934X_NFC_CMD_INPUT_SEL_SIU 0 -#define AR934X_NFC_CMD_INPUT_SEL_DMA BIT(6) -#define AR934X_NFC_CMD_ADDR_SEL_0 0 -#define AR934X_NFC_CMD_ADDR_SEL_1 BIT(7) -#define AR934X_NFC_CMD_CMD0_S 8 -#define AR934X_NFC_CMD_CMD0_M 0xff -#define AR934X_NFC_CMD_CMD1_S 16 -#define AR934X_NFC_CMD_CMD1_M 0xff -#define AR934X_NFC_CMD_CMD2_S 24 -#define AR934X_NFC_CMD_CMD2_M 0xff - -#define AR934X_NFC_CTRL_ADDR_CYCLE0_M 0x7 -#define AR934X_NFC_CTRL_ADDR_CYCLE0_S 0 -#define AR934X_NFC_CTRL_SPARE_EN BIT(3) -#define AR934X_NFC_CTRL_INT_EN BIT(4) -#define AR934X_NFC_CTRL_ECC_EN BIT(5) -#define AR934X_NFC_CTRL_BLOCK_SIZE_S 6 -#define AR934X_NFC_CTRL_BLOCK_SIZE_M 0x3 -#define AR934X_NFC_CTRL_BLOCK_SIZE_32 0 -#define AR934X_NFC_CTRL_BLOCK_SIZE_64 1 -#define AR934X_NFC_CTRL_BLOCK_SIZE_128 2 -#define AR934X_NFC_CTRL_BLOCK_SIZE_256 3 -#define AR934X_NFC_CTRL_PAGE_SIZE_S 8 -#define AR934X_NFC_CTRL_PAGE_SIZE_M 0x7 -#define AR934X_NFC_CTRL_PAGE_SIZE_256 0 -#define AR934X_NFC_CTRL_PAGE_SIZE_512 1 -#define AR934X_NFC_CTRL_PAGE_SIZE_1024 2 -#define AR934X_NFC_CTRL_PAGE_SIZE_2048 3 -#define AR934X_NFC_CTRL_PAGE_SIZE_4096 4 -#define AR934X_NFC_CTRL_PAGE_SIZE_8192 5 -#define AR934X_NFC_CTRL_PAGE_SIZE_16384 6 -#define AR934X_NFC_CTRL_CUSTOM_SIZE_EN BIT(11) -#define AR934X_NFC_CTRL_IO_WIDTH_8BITS 0 -#define AR934X_NFC_CTRL_IO_WIDTH_16BITS BIT(12) -#define AR934X_NFC_CTRL_LOOKUP_EN BIT(13) -#define AR934X_NFC_CTRL_PROT_EN BIT(14) -#define AR934X_NFC_CTRL_WORK_MODE_ASYNC 0 -#define AR934X_NFC_CTRL_WORK_MODE_SYNC BIT(15) -#define AR934X_NFC_CTRL_ADDR0_AUTO_INC BIT(16) -#define AR934X_NFC_CTRL_ADDR1_AUTO_INC BIT(17) -#define AR934X_NFC_CTRL_ADDR_CYCLE1_M 0x7 -#define AR934X_NFC_CTRL_ADDR_CYCLE1_S 18 -#define AR934X_NFC_CTRL_SMALL_PAGE BIT(21) - -#define AR934X_NFC_DMA_CTRL_DMA_START BIT(7) -#define AR934X_NFC_DMA_CTRL_DMA_DIR_WRITE 0 -#define AR934X_NFC_DMA_CTRL_DMA_DIR_READ BIT(6) -#define AR934X_NFC_DMA_CTRL_DMA_MODE_SG BIT(5) -#define AR934X_NFC_DMA_CTRL_DMA_BURST_S 2 -#define AR934X_NFC_DMA_CTRL_DMA_BURST_0 0 -#define AR934X_NFC_DMA_CTRL_DMA_BURST_1 1 -#define AR934X_NFC_DMA_CTRL_DMA_BURST_2 2 -#define AR934X_NFC_DMA_CTRL_DMA_BURST_3 3 -#define AR934X_NFC_DMA_CTRL_DMA_BURST_4 4 -#define AR934X_NFC_DMA_CTRL_DMA_BURST_5 5 -#define AR934X_NFC_DMA_CTRL_ERR_FLAG BIT(1) -#define AR934X_NFC_DMA_CTRL_DMA_READY BIT(0) - -#define AR934X_NFC_INT_DEV_RDY(_x) BIT(4 + (_x)) -#define AR934X_NFC_INT_CMD_END BIT(1) - -#define AR934X_NFC_ECC_CTRL_ERR_THRES_S 8 -#define AR934X_NFC_ECC_CTRL_ERR_THRES_M 0x1f -#define AR934X_NFC_ECC_CTRL_ECC_CAP_S 5 -#define AR934X_NFC_ECC_CTRL_ECC_CAP_M 0x7 -#define AR934X_NFC_ECC_CTRL_ECC_CAP_2 0 -#define AR934X_NFC_ECC_CTRL_ECC_CAP_4 1 -#define AR934X_NFC_ECC_CTRL_ECC_CAP_6 2 -#define AR934X_NFC_ECC_CTRL_ECC_CAP_8 3 -#define AR934X_NFC_ECC_CTRL_ECC_CAP_10 4 -#define AR934X_NFC_ECC_CTRL_ECC_CAP_12 5 -#define AR934X_NFC_ECC_CTRL_ECC_CAP_14 6 -#define AR934X_NFC_ECC_CTRL_ECC_CAP_16 7 -#define AR934X_NFC_ECC_CTRL_ERR_OVER BIT(2) -#define AR934X_NFC_ECC_CTRL_ERR_UNCORRECT BIT(1) -#define AR934X_NFC_ECC_CTRL_ERR_CORRECT BIT(0) - -#define AR934X_NFC_ECC_OFFS_OFSET_M 0xffff - -/* default timing values */ -#define AR934X_NFC_TIME_SEQ_DEFAULT 0x7fff -#define AR934X_NFC_TIMINGS_ASYN_DEFAULT 0x22 -#define AR934X_NFC_TIMINGS_SYN_DEFAULT 0xf - -#define AR934X_NFC_ID_BUF_SIZE 8 -#define AR934X_NFC_DEV_READY_TIMEOUT 25 /* msecs */ -#define AR934X_NFC_DMA_READY_TIMEOUT 25 /* msecs */ -#define AR934X_NFC_DONE_TIMEOUT 1000 -#define AR934X_NFC_DMA_RETRIES 20 - -#define AR934X_NFC_USE_IRQ true -#define AR934X_NFC_IRQ_MASK AR934X_NFC_INT_DEV_RDY(0) - -#define AR934X_NFC_GENSEQ_SMALL_PAGE_READ 0x30043 - -#undef AR934X_NFC_DEBUG_DATA -#undef AR934X_NFC_DEBUG - -struct ar934x_nfc; - -static inline __attribute__ ((format (printf, 2, 3))) -void _nfc_dbg(struct ar934x_nfc *nfc, const char *fmt, ...) -{ -} - -#ifdef AR934X_NFC_DEBUG -#define nfc_dbg(_nfc, fmt, ...) \ - dev_info((_nfc)->parent, fmt, ##__VA_ARGS__) -#else -#define nfc_dbg(_nfc, fmt, ...) \ - _nfc_dbg((_nfc), fmt, ##__VA_ARGS__) -#endif /* AR934X_NFC_DEBUG */ - -#ifdef AR934X_NFC_DEBUG_DATA -static void -nfc_debug_data(const char *label, void *data, int len) -{ - print_hex_dump(KERN_WARNING, label, DUMP_PREFIX_OFFSET, 16, 1, - data, len, 0); -} -#else -static inline void -nfc_debug_data(const char *label, void *data, int len) {} -#endif /* AR934X_NFC_DEBUG_DATA */ - -struct ar934x_nfc { -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - struct mtd_info mtd; -#endif - struct nand_chip nand_chip; - struct device *parent; - void __iomem *base; - void (*select_chip)(int chip_no); - bool swap_dma; - int irq; - wait_queue_head_t irq_waitq; - - bool spurious_irq_expected; - u32 irq_status; - - u32 ctrl_reg; - u32 ecc_ctrl_reg; - u32 ecc_offset_reg; - u32 ecc_thres; - u32 ecc_oob_pos; - - bool small_page; - unsigned int addr_count0; - unsigned int addr_count1; - - u8 *buf; - dma_addr_t buf_dma; - unsigned int buf_size; - int buf_index; - - bool read_id; - - int erase1_page_addr; - - int rndout_page_addr; - int rndout_read_cmd; - - int seqin_page_addr; - int seqin_column; - int seqin_read_cmd; -}; - -static void ar934x_nfc_restart(struct ar934x_nfc *nfc); - -static inline bool -is_all_ff(u8 *buf, int len) -{ - while (len--) - if (buf[len] != 0xff) - return false; - - return true; -} - -static inline void -ar934x_nfc_wr(struct ar934x_nfc *nfc, unsigned reg, u32 val) -{ - __raw_writel(val, nfc->base + reg); -} - -static inline u32 -ar934x_nfc_rr(struct ar934x_nfc *nfc, unsigned reg) -{ - return __raw_readl(nfc->base + reg); -} - -static inline struct ar934x_nfc_platform_data * -ar934x_nfc_get_platform_data(struct ar934x_nfc *nfc) -{ - return nfc->parent->platform_data; -} - -static inline struct -ar934x_nfc *mtd_to_ar934x_nfc(struct mtd_info *mtd) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - return container_of(mtd, struct ar934x_nfc, mtd); -#else - struct nand_chip *chip = mtd_to_nand(mtd); - - return container_of(chip, struct ar934x_nfc, nand_chip); -#endif -} - -static struct mtd_info *ar934x_nfc_to_mtd(struct ar934x_nfc *nfc) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - return &nfc->mtd; -#else - return nand_to_mtd(&nfc->nand_chip); -#endif -} - -static inline bool ar934x_nfc_use_irq(struct ar934x_nfc *nfc) -{ - return AR934X_NFC_USE_IRQ; -} - -static inline void ar934x_nfc_write_cmd_reg(struct ar934x_nfc *nfc, u32 cmd_reg) -{ - wmb(); - - ar934x_nfc_wr(nfc, AR934X_NFC_REG_CMD, cmd_reg); - /* flush write */ - ar934x_nfc_rr(nfc, AR934X_NFC_REG_CMD); -} - -static bool -__ar934x_nfc_dev_ready(struct ar934x_nfc *nfc) -{ - u32 status; - - status = ar934x_nfc_rr(nfc, AR934X_NFC_REG_STATUS); - return (status & 0xff) == 0xff; -} - -static inline bool -__ar934x_nfc_is_dma_ready(struct ar934x_nfc *nfc) -{ - u32 status; - - status = ar934x_nfc_rr(nfc, AR934X_NFC_REG_DMA_CTRL); - return (status & AR934X_NFC_DMA_CTRL_DMA_READY) != 0; -} - -static int -ar934x_nfc_wait_dev_ready(struct ar934x_nfc *nfc) -{ - unsigned long timeout; - - timeout = jiffies + msecs_to_jiffies(AR934X_NFC_DEV_READY_TIMEOUT); - do { - if (__ar934x_nfc_dev_ready(nfc)) - return 0; - } while time_before(jiffies, timeout); - - nfc_dbg(nfc, "timeout waiting for device ready, status:%08x int:%08x\n", - ar934x_nfc_rr(nfc, AR934X_NFC_REG_STATUS), - ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_STATUS)); - return -ETIMEDOUT; -} - -static int -ar934x_nfc_wait_dma_ready(struct ar934x_nfc *nfc) -{ - unsigned long timeout; - - timeout = jiffies + msecs_to_jiffies(AR934X_NFC_DMA_READY_TIMEOUT); - do { - if (__ar934x_nfc_is_dma_ready(nfc)) - return 0; - } while time_before(jiffies, timeout); - - nfc_dbg(nfc, "timeout waiting for DMA ready, dma_ctrl:%08x\n", - ar934x_nfc_rr(nfc, AR934X_NFC_REG_DMA_CTRL)); - return -ETIMEDOUT; -} - -static int -ar934x_nfc_wait_irq(struct ar934x_nfc *nfc) -{ - long timeout; - int ret; - - timeout = wait_event_timeout(nfc->irq_waitq, - (nfc->irq_status & AR934X_NFC_IRQ_MASK) != 0, - msecs_to_jiffies(AR934X_NFC_DEV_READY_TIMEOUT)); - - ret = 0; - if (!timeout) { - ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_MASK, 0); - ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0); - /* flush write */ - ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_STATUS); - - nfc_dbg(nfc, - "timeout waiting for interrupt, status:%08x\n", - nfc->irq_status); - ret = -ETIMEDOUT; - } - - nfc->irq_status = 0; - return ret; -} - -static int -ar934x_nfc_wait_done(struct ar934x_nfc *nfc) -{ - int ret; - - if (ar934x_nfc_use_irq(nfc)) - ret = ar934x_nfc_wait_irq(nfc); - else - ret = ar934x_nfc_wait_dev_ready(nfc); - - if (ret) - return ret; - - return ar934x_nfc_wait_dma_ready(nfc); -} - -static int -ar934x_nfc_alloc_buf(struct ar934x_nfc *nfc, unsigned size) -{ - nfc->buf = dma_alloc_coherent(nfc->parent, size, - &nfc->buf_dma, GFP_KERNEL); - if (nfc->buf == NULL) { - dev_err(nfc->parent, "no memory for DMA buffer\n"); - return -ENOMEM; - } - - nfc->buf_size = size; - nfc_dbg(nfc, "buf:%p size:%u\n", nfc->buf, nfc->buf_size); - - return 0; -} - -static void -ar934x_nfc_free_buf(struct ar934x_nfc *nfc) -{ - dma_free_coherent(nfc->parent, nfc->buf_size, nfc->buf, nfc->buf_dma); -} - -static void -ar934x_nfc_get_addr(struct ar934x_nfc *nfc, int column, int page_addr, - u32 *addr0, u32 *addr1) -{ - u32 a0, a1; - - a0 = 0; - a1 = 0; - - if (column == -1) { - /* ERASE1 */ - a0 = (page_addr & 0xffff) << 16; - a1 = (page_addr >> 16) & 0xf; - } else if (page_addr != -1) { - /* SEQIN, READ0, etc.. */ - - /* TODO: handle 16bit bus width */ - if (nfc->small_page) { - a0 = column & 0xff; - a0 |= (page_addr & 0xff) << 8; - a0 |= ((page_addr >> 8) & 0xff) << 16; - a0 |= ((page_addr >> 16) & 0xff) << 24; - } else { - a0 = column & 0x0FFF; - a0 |= (page_addr & 0xffff) << 16; - - if (nfc->addr_count0 > 4) - a1 = (page_addr >> 16) & 0xf; - } - } - - *addr0 = a0; - *addr1 = a1; -} - -static void -ar934x_nfc_send_cmd(struct ar934x_nfc *nfc, unsigned command) -{ - u32 cmd_reg; - - cmd_reg = AR934X_NFC_CMD_INPUT_SEL_SIU | AR934X_NFC_CMD_ADDR_SEL_0 | - AR934X_NFC_CMD_SEQ_1C; - cmd_reg |= (command & AR934X_NFC_CMD_CMD0_M) << AR934X_NFC_CMD_CMD0_S; - - ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0); - ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, nfc->ctrl_reg); - - ar934x_nfc_write_cmd_reg(nfc, cmd_reg); - ar934x_nfc_wait_dev_ready(nfc); -} - -static int -ar934x_nfc_do_rw_command(struct ar934x_nfc *nfc, int column, int page_addr, - int len, u32 cmd_reg, u32 ctrl_reg, bool write) -{ - u32 addr0, addr1; - u32 dma_ctrl; - int dir; - int err; - int retries = 0; - - WARN_ON(len & 3); - - if (WARN_ON(len > nfc->buf_size)) - dev_err(nfc->parent, "len=%d > buf_size=%d", len, nfc->buf_size); - - if (write) { - dma_ctrl = AR934X_NFC_DMA_CTRL_DMA_DIR_WRITE; - dir = DMA_TO_DEVICE; - } else { - dma_ctrl = AR934X_NFC_DMA_CTRL_DMA_DIR_READ; - dir = DMA_FROM_DEVICE; - } - - ar934x_nfc_get_addr(nfc, column, page_addr, &addr0, &addr1); - - dma_ctrl |= AR934X_NFC_DMA_CTRL_DMA_START | - (AR934X_NFC_DMA_CTRL_DMA_BURST_3 << - AR934X_NFC_DMA_CTRL_DMA_BURST_S); - - cmd_reg |= AR934X_NFC_CMD_INPUT_SEL_DMA | AR934X_NFC_CMD_ADDR_SEL_0; - ctrl_reg |= AR934X_NFC_CTRL_INT_EN; - - nfc_dbg(nfc, "%s a0:%08x a1:%08x len:%x cmd:%08x dma:%08x ctrl:%08x\n", - (write) ? "write" : "read", - addr0, addr1, len, cmd_reg, dma_ctrl, ctrl_reg); - -retry: - ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0); - ar934x_nfc_wr(nfc, AR934X_NFC_REG_ADDR0_0, addr0); - ar934x_nfc_wr(nfc, AR934X_NFC_REG_ADDR0_1, addr1); - ar934x_nfc_wr(nfc, AR934X_NFC_REG_DMA_ADDR, nfc->buf_dma); - ar934x_nfc_wr(nfc, AR934X_NFC_REG_DMA_COUNT, len); - ar934x_nfc_wr(nfc, AR934X_NFC_REG_DATA_SIZE, len); - ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, ctrl_reg); - ar934x_nfc_wr(nfc, AR934X_NFC_REG_DMA_CTRL, dma_ctrl); - ar934x_nfc_wr(nfc, AR934X_NFC_REG_ECC_CTRL, nfc->ecc_ctrl_reg); - ar934x_nfc_wr(nfc, AR934X_NFC_REG_ECC_OFFSET, nfc->ecc_offset_reg); - - if (ar934x_nfc_use_irq(nfc)) { - ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_MASK, AR934X_NFC_IRQ_MASK); - /* flush write */ - ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_MASK); - } - - ar934x_nfc_write_cmd_reg(nfc, cmd_reg); - err = ar934x_nfc_wait_done(nfc); - if (err) { - dev_dbg(nfc->parent, "%s operation stuck at page %d\n", - (write) ? "write" : "read", page_addr); - - ar934x_nfc_restart(nfc); - if (retries++ < AR934X_NFC_DMA_RETRIES) - goto retry; - - dev_err(nfc->parent, "%s operation failed on page %d\n", - (write) ? "write" : "read", page_addr); - } - - return err; -} - -static int -ar934x_nfc_send_readid(struct ar934x_nfc *nfc, unsigned command) -{ - u32 cmd_reg; - int err; - - nfc_dbg(nfc, "readid, cmd:%02x\n", command); - - cmd_reg = AR934X_NFC_CMD_SEQ_1C1AXR; - cmd_reg |= (command & AR934X_NFC_CMD_CMD0_M) << AR934X_NFC_CMD_CMD0_S; - - err = ar934x_nfc_do_rw_command(nfc, -1, -1, AR934X_NFC_ID_BUF_SIZE, - cmd_reg, nfc->ctrl_reg, false); - - nfc_debug_data("[id] ", nfc->buf, AR934X_NFC_ID_BUF_SIZE); - - return err; -} - -static int -ar934x_nfc_send_read(struct ar934x_nfc *nfc, unsigned command, int column, - int page_addr, int len) -{ - u32 cmd_reg; - int err; - - nfc_dbg(nfc, "read, column=%d page=%d len=%d\n", - column, page_addr, len); - - cmd_reg = (command & AR934X_NFC_CMD_CMD0_M) << AR934X_NFC_CMD_CMD0_S; - - if (nfc->small_page) { - cmd_reg |= AR934X_NFC_CMD_SEQ_18; - } else { - cmd_reg |= NAND_CMD_READSTART << AR934X_NFC_CMD_CMD1_S; - cmd_reg |= AR934X_NFC_CMD_SEQ_1C5A1CXR; - } - - err = ar934x_nfc_do_rw_command(nfc, column, page_addr, len, - cmd_reg, nfc->ctrl_reg, false); - - nfc_debug_data("[data] ", nfc->buf, len); - - return err; -} - -static void -ar934x_nfc_send_erase(struct ar934x_nfc *nfc, unsigned command, int column, - int page_addr) -{ - u32 addr0, addr1; - u32 ctrl_reg; - u32 cmd_reg; - - ar934x_nfc_get_addr(nfc, column, page_addr, &addr0, &addr1); - - ctrl_reg = nfc->ctrl_reg; - if (nfc->small_page) { - /* override number of address cycles for the erase command */ - ctrl_reg &= ~(AR934X_NFC_CTRL_ADDR_CYCLE0_M << - AR934X_NFC_CTRL_ADDR_CYCLE0_S); - ctrl_reg &= ~(AR934X_NFC_CTRL_ADDR_CYCLE1_M << - AR934X_NFC_CTRL_ADDR_CYCLE1_S); - ctrl_reg &= ~(AR934X_NFC_CTRL_SMALL_PAGE); - ctrl_reg |= (nfc->addr_count0 + 1) << - AR934X_NFC_CTRL_ADDR_CYCLE0_S; - } - - cmd_reg = NAND_CMD_ERASE1 << AR934X_NFC_CMD_CMD0_S; - cmd_reg |= command << AR934X_NFC_CMD_CMD1_S; - cmd_reg |= AR934X_NFC_CMD_SEQ_ERASE; - - nfc_dbg(nfc, "erase page %d, a0:%08x a1:%08x cmd:%08x ctrl:%08x\n", - page_addr, addr0, addr1, cmd_reg, ctrl_reg); - - ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0); - ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, ctrl_reg); - ar934x_nfc_wr(nfc, AR934X_NFC_REG_ADDR0_0, addr0); - ar934x_nfc_wr(nfc, AR934X_NFC_REG_ADDR0_1, addr1); - - ar934x_nfc_write_cmd_reg(nfc, cmd_reg); - ar934x_nfc_wait_dev_ready(nfc); -} - -static int -ar934x_nfc_send_write(struct ar934x_nfc *nfc, unsigned command, int column, - int page_addr, int len) -{ - u32 cmd_reg; - - nfc_dbg(nfc, "write, column=%d page=%d len=%d\n", - column, page_addr, len); - - nfc_debug_data("[data] ", nfc->buf, len); - - cmd_reg = NAND_CMD_SEQIN << AR934X_NFC_CMD_CMD0_S; - cmd_reg |= command << AR934X_NFC_CMD_CMD1_S; - cmd_reg |= AR934X_NFC_CMD_SEQ_12; - - return ar934x_nfc_do_rw_command(nfc, column, page_addr, len, - cmd_reg, nfc->ctrl_reg, true); -} - -static void -ar934x_nfc_read_status(struct ar934x_nfc *nfc) -{ - u32 cmd_reg; - u32 status; - - cmd_reg = NAND_CMD_STATUS << AR934X_NFC_CMD_CMD0_S; - cmd_reg |= AR934X_NFC_CMD_SEQ_S; - - ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0); - ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, nfc->ctrl_reg); - - ar934x_nfc_write_cmd_reg(nfc, cmd_reg); - ar934x_nfc_wait_dev_ready(nfc); - - status = ar934x_nfc_rr(nfc, AR934X_NFC_REG_READ_STATUS); - - nfc_dbg(nfc, "read status, cmd:%08x status:%02x\n", - cmd_reg, (status & 0xff)); - - if (nfc->swap_dma) - nfc->buf[0 ^ 3] = status; - else - nfc->buf[0] = status; -} - -static void -ar934x_nfc_cmdfunc(struct mtd_info *mtd, unsigned int command, int column, - int page_addr) -{ - struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd); - struct nand_chip *nand = &nfc->nand_chip; - - nfc->read_id = false; - if (command != NAND_CMD_PAGEPROG) - nfc->buf_index = 0; - - switch (command) { - case NAND_CMD_RESET: - ar934x_nfc_send_cmd(nfc, command); - break; - - case NAND_CMD_READID: - nfc->read_id = true; - ar934x_nfc_send_readid(nfc, command); - break; - - case NAND_CMD_READ0: - case NAND_CMD_READ1: - if (nfc->small_page) { - ar934x_nfc_send_read(nfc, command, column, page_addr, - mtd->writesize + mtd->oobsize); - } else { - ar934x_nfc_send_read(nfc, command, 0, page_addr, - mtd->writesize + mtd->oobsize); - nfc->buf_index = column; - nfc->rndout_page_addr = page_addr; - nfc->rndout_read_cmd = command; - } - break; - - case NAND_CMD_READOOB: - if (nfc->small_page) - ar934x_nfc_send_read(nfc, NAND_CMD_READOOB, - column, page_addr, - mtd->oobsize); - else - ar934x_nfc_send_read(nfc, NAND_CMD_READ0, - mtd->writesize, page_addr, - mtd->oobsize); - break; - - case NAND_CMD_RNDOUT: - if (WARN_ON(nfc->small_page)) - break; - - /* emulate subpage read */ - ar934x_nfc_send_read(nfc, nfc->rndout_read_cmd, 0, - nfc->rndout_page_addr, - mtd->writesize + mtd->oobsize); - nfc->buf_index = column; - break; - - case NAND_CMD_ERASE1: - nfc->erase1_page_addr = page_addr; - break; - - case NAND_CMD_ERASE2: - ar934x_nfc_send_erase(nfc, command, -1, nfc->erase1_page_addr); - break; - - case NAND_CMD_STATUS: - ar934x_nfc_read_status(nfc); - break; - - case NAND_CMD_SEQIN: - if (nfc->small_page) { - /* output read command */ - if (column >= mtd->writesize) { - column -= mtd->writesize; - nfc->seqin_read_cmd = NAND_CMD_READOOB; - } else if (column < 256) { - nfc->seqin_read_cmd = NAND_CMD_READ0; - } else { - column -= 256; - nfc->seqin_read_cmd = NAND_CMD_READ1; - } - } else { - nfc->seqin_read_cmd = NAND_CMD_READ0; - } - nfc->seqin_column = column; - nfc->seqin_page_addr = page_addr; - break; - - case NAND_CMD_PAGEPROG: - if (nand->ecc.mode == NAND_ECC_HW) { - /* the data is already written */ - break; - } - - if (nfc->small_page) - ar934x_nfc_send_cmd(nfc, nfc->seqin_read_cmd); - - ar934x_nfc_send_write(nfc, command, nfc->seqin_column, - nfc->seqin_page_addr, - nfc->buf_index); - break; - - default: - dev_err(nfc->parent, - "unsupported command: %x, column:%d page_addr=%d\n", - command, column, page_addr); - break; - } -} - -static int -ar934x_nfc_dev_ready(struct mtd_info *mtd) -{ - struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd); - - return __ar934x_nfc_dev_ready(nfc); -} - -static void -ar934x_nfc_select_chip(struct mtd_info *mtd, int chip_no) -{ - struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd); - - if (nfc->select_chip) - nfc->select_chip(chip_no); -} - -static u8 -ar934x_nfc_read_byte(struct mtd_info *mtd) -{ - struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd); - u8 data; - - WARN_ON(nfc->buf_index >= nfc->buf_size); - - if (nfc->swap_dma || nfc->read_id) - data = nfc->buf[nfc->buf_index ^ 3]; - else - data = nfc->buf[nfc->buf_index]; - - nfc->buf_index++; - - return data; -} - -static void -ar934x_nfc_write_buf(struct mtd_info *mtd, const u8 *buf, int len) -{ - struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd); - int i; - - WARN_ON(nfc->buf_index + len > nfc->buf_size); - - if (nfc->swap_dma) { - for (i = 0; i < len; i++) { - nfc->buf[nfc->buf_index ^ 3] = buf[i]; - nfc->buf_index++; - } - } else { - for (i = 0; i < len; i++) { - nfc->buf[nfc->buf_index] = buf[i]; - nfc->buf_index++; - } - } -} - -static void -ar934x_nfc_read_buf(struct mtd_info *mtd, u8 *buf, int len) -{ - struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd); - int buf_index; - int i; - - WARN_ON(nfc->buf_index + len > nfc->buf_size); - - buf_index = nfc->buf_index; - - if (nfc->swap_dma || nfc->read_id) { - for (i = 0; i < len; i++) { - buf[i] = nfc->buf[buf_index ^ 3]; - buf_index++; - } - } else { - for (i = 0; i < len; i++) { - buf[i] = nfc->buf[buf_index]; - buf_index++; - } - } - - nfc->buf_index = buf_index; -} - -static inline void -ar934x_nfc_enable_hwecc(struct ar934x_nfc *nfc) -{ - nfc->ctrl_reg |= AR934X_NFC_CTRL_ECC_EN; - nfc->ctrl_reg &= ~AR934X_NFC_CTRL_CUSTOM_SIZE_EN; -} - -static inline void -ar934x_nfc_disable_hwecc(struct ar934x_nfc *nfc) -{ - nfc->ctrl_reg &= ~AR934X_NFC_CTRL_ECC_EN; - nfc->ctrl_reg |= AR934X_NFC_CTRL_CUSTOM_SIZE_EN; -} - -static int -ar934x_nfc_read_oob(struct mtd_info *mtd, struct nand_chip *chip, - int page) -{ - struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd); - int err; - - nfc_dbg(nfc, "read_oob: page:%d\n", page); - - err = ar934x_nfc_send_read(nfc, NAND_CMD_READ0, mtd->writesize, page, - mtd->oobsize); - if (err) - return err; - - memcpy(chip->oob_poi, nfc->buf, mtd->oobsize); - - return 0; -} - -static int -ar934x_nfc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, - int page) -{ - struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd); - - nfc_dbg(nfc, "write_oob: page:%d\n", page); - - memcpy(nfc->buf, chip->oob_poi, mtd->oobsize); - - return ar934x_nfc_send_write(nfc, NAND_CMD_PAGEPROG, mtd->writesize, - page, mtd->oobsize); -} - -static int -ar934x_nfc_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - u8 *buf, int oob_required, int page) -{ - struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd); - int len; - int err; - - nfc_dbg(nfc, "read_page_raw: page:%d oob:%d\n", page, oob_required); - - len = mtd->writesize; - if (oob_required) - len += mtd->oobsize; - - err = ar934x_nfc_send_read(nfc, NAND_CMD_READ0, 0, page, len); - if (err) - return err; - - memcpy(buf, nfc->buf, mtd->writesize); - - if (oob_required) - memcpy(chip->oob_poi, &nfc->buf[mtd->writesize], mtd->oobsize); - - return 0; -} - -static int -ar934x_nfc_read_page(struct mtd_info *mtd, struct nand_chip *chip, - u8 *buf, int oob_required, int page) -{ - struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd); - u32 ecc_ctrl; - int max_bitflips = 0; - bool ecc_failed; - bool ecc_corrected; - int err; - - nfc_dbg(nfc, "read_page: page:%d oob:%d\n", page, oob_required); - - ar934x_nfc_enable_hwecc(nfc); - err = ar934x_nfc_send_read(nfc, NAND_CMD_READ0, 0, page, - mtd->writesize); - ar934x_nfc_disable_hwecc(nfc); - - if (err) - return err; - - /* TODO: optimize to avoid memcpy */ - memcpy(buf, nfc->buf, mtd->writesize); - - /* read the ECC status */ - ecc_ctrl = ar934x_nfc_rr(nfc, AR934X_NFC_REG_ECC_CTRL); - ecc_failed = ecc_ctrl & AR934X_NFC_ECC_CTRL_ERR_UNCORRECT; - ecc_corrected = ecc_ctrl & AR934X_NFC_ECC_CTRL_ERR_CORRECT; - - if (oob_required || ecc_failed) { - err = ar934x_nfc_send_read(nfc, NAND_CMD_READ0, mtd->writesize, - page, mtd->oobsize); - if (err) - return err; - - if (oob_required) - memcpy(chip->oob_poi, nfc->buf, mtd->oobsize); - } - - if (ecc_failed) { - /* - * The hardware ECC engine reports uncorrectable errors - * on empty pages. Check the ECC bytes and the data. If - * both contains 0xff bytes only, dont report a failure. - * - * TODO: prebuild a buffer with 0xff bytes and use memcmp - * for better performance? - */ - if (!is_all_ff(&nfc->buf[nfc->ecc_oob_pos], chip->ecc.total) || - !is_all_ff(buf, mtd->writesize)) - mtd->ecc_stats.failed++; - } else if (ecc_corrected) { - /* - * The hardware does not report the exact count of the - * corrected bitflips, use assumptions based on the - * threshold. - */ - if (ecc_ctrl & AR934X_NFC_ECC_CTRL_ERR_OVER) { - /* - * The number of corrected bitflips exceeds the - * threshold. Assume the maximum. - */ - max_bitflips = chip->ecc.strength * chip->ecc.steps; - } else { - max_bitflips = nfc->ecc_thres * chip->ecc.steps; - } - - mtd->ecc_stats.corrected += max_bitflips; - } - - return max_bitflips; -} - -static int -ar934x_nfc_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - const u8 *buf, int oob_required, int page) -{ - struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd); - int len; - - nfc_dbg(nfc, "write_page_raw: page:%d oob:%d\n", page, oob_required); - - memcpy(nfc->buf, buf, mtd->writesize); - len = mtd->writesize; - - if (oob_required) { - memcpy(&nfc->buf[mtd->writesize], chip->oob_poi, mtd->oobsize); - len += mtd->oobsize; - } - - return ar934x_nfc_send_write(nfc, NAND_CMD_PAGEPROG, 0, page, len); -} - -static int -ar934x_nfc_write_page(struct mtd_info *mtd, struct nand_chip *chip, - const u8 *buf, int oob_required, int page) -{ - struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd); - int err; - - nfc_dbg(nfc, "write_page: page:%d oob:%d\n", page, oob_required); - - /* write OOB first */ - if (oob_required && - !is_all_ff(chip->oob_poi, mtd->oobsize)) { - err = ar934x_nfc_write_oob(mtd, chip, page); - if (err) - return err; - } - - /* TODO: optimize to avoid memcopy */ - memcpy(nfc->buf, buf, mtd->writesize); - - ar934x_nfc_enable_hwecc(nfc); - err = ar934x_nfc_send_write(nfc, NAND_CMD_PAGEPROG, 0, page, - mtd->writesize); - ar934x_nfc_disable_hwecc(nfc); - - return err; -} - -static void -ar934x_nfc_hw_init(struct ar934x_nfc *nfc) -{ - struct ar934x_nfc_platform_data *pdata; - - pdata = ar934x_nfc_get_platform_data(nfc); - if (pdata->hw_reset) { - pdata->hw_reset(true); - pdata->hw_reset(false); - } - - /* - * setup timings - * TODO: make it configurable via platform data - */ - ar934x_nfc_wr(nfc, AR934X_NFC_REG_TIME_SEQ, - AR934X_NFC_TIME_SEQ_DEFAULT); - ar934x_nfc_wr(nfc, AR934X_NFC_REG_TIMINGS_ASYN, - AR934X_NFC_TIMINGS_ASYN_DEFAULT); - ar934x_nfc_wr(nfc, AR934X_NFC_REG_TIMINGS_SYN, - AR934X_NFC_TIMINGS_SYN_DEFAULT); - - /* disable WP on all chips, and select chip 0 */ - ar934x_nfc_wr(nfc, AR934X_NFC_REG_MEM_CTRL, 0xff00); - - ar934x_nfc_wr(nfc, AR934X_NFC_REG_DMA_ADDR_OFFS, 0); - - /* initialize Control register */ - nfc->ctrl_reg = AR934X_NFC_CTRL_CUSTOM_SIZE_EN; - ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, nfc->ctrl_reg); - - if (nfc->small_page) { - /* Setup generic sequence register for small page reads. */ - ar934x_nfc_wr(nfc, AR934X_NFC_REG_GEN_SEQ_CTRL, - AR934X_NFC_GENSEQ_SMALL_PAGE_READ); - } -} - -static void -ar934x_nfc_restart(struct ar934x_nfc *nfc) -{ - u32 ctrl_reg; - - if (nfc->select_chip) - nfc->select_chip(-1); - - ctrl_reg = nfc->ctrl_reg; - ar934x_nfc_hw_init(nfc); - nfc->ctrl_reg = ctrl_reg; - - if (nfc->select_chip) - nfc->select_chip(0); - - ar934x_nfc_send_cmd(nfc, NAND_CMD_RESET); -} - -static irqreturn_t -ar934x_nfc_irq_handler(int irq, void *data) -{ - struct ar934x_nfc *nfc = data; - u32 status; - - status = ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_STATUS); - - ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0); - /* flush write */ - ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_STATUS); - - status &= ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_MASK); - if (status) { - nfc_dbg(nfc, "got IRQ, status:%08x\n", status); - - nfc->irq_status = status; - nfc->spurious_irq_expected = true; - wake_up(&nfc->irq_waitq); - } else { - if (nfc->spurious_irq_expected) { - nfc->spurious_irq_expected = false; - } else { - dev_warn(nfc->parent, "spurious interrupt\n"); - } - } - - return IRQ_HANDLED; -} - -static int -ar934x_nfc_init_tail(struct mtd_info *mtd) -{ - struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd); - struct nand_chip *chip = &nfc->nand_chip; - u32 ctrl; - u32 t; - int err; - - switch (mtd->oobsize) { - case 16: - case 64: - case 128: - ar934x_nfc_wr(nfc, AR934X_NFC_REG_SPARE_SIZE, mtd->oobsize); - break; - - default: - dev_err(nfc->parent, "unsupported OOB size: %d bytes\n", - mtd->oobsize); - return -ENXIO; - } - - ctrl = AR934X_NFC_CTRL_CUSTOM_SIZE_EN; - - switch (mtd->erasesize / mtd->writesize) { - case 32: - t = AR934X_NFC_CTRL_BLOCK_SIZE_32; - break; - - case 64: - t = AR934X_NFC_CTRL_BLOCK_SIZE_64; - break; - - case 128: - t = AR934X_NFC_CTRL_BLOCK_SIZE_128; - break; - - case 256: - t = AR934X_NFC_CTRL_BLOCK_SIZE_256; - break; - - default: - dev_err(nfc->parent, "unsupported block size: %u\n", - mtd->erasesize / mtd->writesize); - return -ENXIO; - } - - ctrl |= t << AR934X_NFC_CTRL_BLOCK_SIZE_S; - - switch (mtd->writesize) { - case 256: - nfc->small_page = 1; - t = AR934X_NFC_CTRL_PAGE_SIZE_256; - break; - - case 512: - nfc->small_page = 1; - t = AR934X_NFC_CTRL_PAGE_SIZE_512; - break; - - case 1024: - t = AR934X_NFC_CTRL_PAGE_SIZE_1024; - break; - - case 2048: - t = AR934X_NFC_CTRL_PAGE_SIZE_2048; - break; - - case 4096: - t = AR934X_NFC_CTRL_PAGE_SIZE_4096; - break; - - case 8192: - t = AR934X_NFC_CTRL_PAGE_SIZE_8192; - break; - - case 16384: - t = AR934X_NFC_CTRL_PAGE_SIZE_16384; - break; - - default: - dev_err(nfc->parent, "unsupported write size: %d bytes\n", - mtd->writesize); - return -ENXIO; - } - - ctrl |= t << AR934X_NFC_CTRL_PAGE_SIZE_S; - - if (nfc->small_page) { - ctrl |= AR934X_NFC_CTRL_SMALL_PAGE; - - if (chip->chipsize > (32 << 20)) { - nfc->addr_count0 = 4; - nfc->addr_count1 = 3; - } else if (chip->chipsize > (2 << 16)) { - nfc->addr_count0 = 3; - nfc->addr_count1 = 2; - } else { - nfc->addr_count0 = 2; - nfc->addr_count1 = 1; - } - } else { - if (chip->chipsize > (128 << 20)) { - nfc->addr_count0 = 5; - nfc->addr_count1 = 3; - } else if (chip->chipsize > (8 << 16)) { - nfc->addr_count0 = 4; - nfc->addr_count1 = 2; - } else { - nfc->addr_count0 = 3; - nfc->addr_count1 = 1; - } - } - - ctrl |= nfc->addr_count0 << AR934X_NFC_CTRL_ADDR_CYCLE0_S; - ctrl |= nfc->addr_count1 << AR934X_NFC_CTRL_ADDR_CYCLE1_S; - - nfc->ctrl_reg = ctrl; - ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, nfc->ctrl_reg); - - ar934x_nfc_free_buf(nfc); - err = ar934x_nfc_alloc_buf(nfc, mtd->writesize + mtd->oobsize); - - return err; -} - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) -static struct nand_ecclayout ar934x_nfc_oob_64_hwecc = { - .eccbytes = 28, - .eccpos = { - 20, 21, 22, 23, 24, 25, 26, - 27, 28, 29, 30, 31, 32, 33, - 34, 35, 36, 37, 38, 39, 40, - 41, 42, 43, 44, 45, 46, 47, - }, - .oobfree = { - { - .offset = 4, - .length = 16, - }, - { - .offset = 48, - .length = 16, - }, - }, -}; - -#else - -static int ar934x_nfc_ooblayout_ecc(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - if (section) - return -ERANGE; - - oobregion->offset = 20; - oobregion->length = 28; - - return 0; -} - -static int ar934x_nfc_ooblayout_free(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - switch (section) { - case 0: - oobregion->offset = 4; - oobregion->length = 16; - return 0; - case 1: - oobregion->offset = 48; - oobregion->length = 16; - return 0; - default: - return -ERANGE; - } -} - -static const struct mtd_ooblayout_ops ar934x_nfc_ecclayout_ops = { - .ecc = ar934x_nfc_ooblayout_ecc, - .free = ar934x_nfc_ooblayout_free, -}; -#endif /* < 4.6 */ - -static int -ar934x_nfc_setup_hwecc(struct ar934x_nfc *nfc) -{ - struct nand_chip *nand = &nfc->nand_chip; - struct mtd_info *mtd = ar934x_nfc_to_mtd(nfc); - u32 ecc_cap; - u32 ecc_thres; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0) - struct mtd_oob_region oobregion; -#endif - - if (!IS_ENABLED(CONFIG_MTD_NAND_AR934X_HW_ECC)) { - dev_err(nfc->parent, "hardware ECC support is disabled\n"); - return -EINVAL; - } - - switch (mtd->writesize) { - case 2048: - /* - * Writing a subpage separately is not supported, because - * the controller only does ECC on full-page accesses. - */ - nand->options = NAND_NO_SUBPAGE_WRITE; - - nand->ecc.size = 512; - nand->ecc.bytes = 7; - nand->ecc.strength = 4; -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - nand->ecc.layout = &ar934x_nfc_oob_64_hwecc; -#else - mtd_set_ooblayout(mtd, &ar934x_nfc_ecclayout_ops); -#endif - break; - - default: - dev_err(nfc->parent, - "hardware ECC is not available for %d byte pages\n", - mtd->writesize); - return -EINVAL; - } - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - BUG_ON(!nand->ecc.layout); -#else - BUG_ON(!mtd->ooblayout->ecc); -#endif - - switch (nand->ecc.strength) { - case 4: - ecc_cap = AR934X_NFC_ECC_CTRL_ECC_CAP_4; - ecc_thres = 4; - break; - - default: - dev_err(nfc->parent, "unsupported ECC strength %u\n", - nand->ecc.strength); - return -EINVAL; - } - - nfc->ecc_thres = ecc_thres; -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - nfc->ecc_oob_pos = nand->ecc.layout->eccpos[0]; -#else - mtd->ooblayout->ecc(mtd, 0, &oobregion); - nfc->ecc_oob_pos = oobregion.offset; -#endif - - nfc->ecc_ctrl_reg = ecc_cap << AR934X_NFC_ECC_CTRL_ECC_CAP_S; - nfc->ecc_ctrl_reg |= ecc_thres << AR934X_NFC_ECC_CTRL_ERR_THRES_S; - - nfc->ecc_offset_reg = mtd->writesize + nfc->ecc_oob_pos; - - nand->ecc.mode = NAND_ECC_HW; - nand->ecc.read_page = ar934x_nfc_read_page; - nand->ecc.read_page_raw = ar934x_nfc_read_page_raw; - nand->ecc.write_page = ar934x_nfc_write_page; - nand->ecc.write_page_raw = ar934x_nfc_write_page_raw; - nand->ecc.read_oob = ar934x_nfc_read_oob; - nand->ecc.write_oob = ar934x_nfc_write_oob; - - return 0; -} - -static int -ar934x_nfc_probe(struct platform_device *pdev) -{ - static const char *part_probes[] = { "cmdlinepart", NULL, }; - struct ar934x_nfc_platform_data *pdata; - struct ar934x_nfc *nfc; - struct resource *res; - struct mtd_info *mtd; - struct nand_chip *nand; - struct mtd_part_parser_data ppdata; - int ret; - - pdata = pdev->dev.platform_data; - if (pdata == NULL) { - dev_err(&pdev->dev, "no platform data defined\n"); - return -EINVAL; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "failed to get I/O memory\n"); - return -EINVAL; - } - - nfc = devm_kzalloc(&pdev->dev, sizeof(struct ar934x_nfc), GFP_KERNEL); - if (!nfc) { - dev_err(&pdev->dev, "failed to allocate driver data\n"); - return -ENOMEM; - } - - nfc->base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(nfc->base)) { - dev_err(&pdev->dev, "failed to remap I/O memory\n"); - return PTR_ERR(nfc->base); - } - - nfc->irq = platform_get_irq(pdev, 0); - if (nfc->irq < 0) { - dev_err(&pdev->dev, "no IRQ resource specified\n"); - return -EINVAL; - } - - init_waitqueue_head(&nfc->irq_waitq); - ret = request_irq(nfc->irq, ar934x_nfc_irq_handler, 0, - dev_name(&pdev->dev), nfc); - if (ret) { - dev_err(&pdev->dev, "requast_irq failed, err:%d\n", ret); - return ret; - } - - nfc->parent = &pdev->dev; - nfc->select_chip = pdata->select_chip; - nfc->swap_dma = pdata->swap_dma; - - nand = &nfc->nand_chip; - mtd = ar934x_nfc_to_mtd(nfc); - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - mtd->priv = nand; -#endif - mtd->owner = THIS_MODULE; - if (pdata->name) - mtd->name = pdata->name; - else - mtd->name = dev_name(&pdev->dev); - - nand->chip_delay = 25; - - nand->dev_ready = ar934x_nfc_dev_ready; - nand->cmdfunc = ar934x_nfc_cmdfunc; - nand->read_byte = ar934x_nfc_read_byte; - nand->write_buf = ar934x_nfc_write_buf; - nand->read_buf = ar934x_nfc_read_buf; - nand->select_chip = ar934x_nfc_select_chip; - - ret = ar934x_nfc_alloc_buf(nfc, AR934X_NFC_ID_BUF_SIZE); - if (ret) - goto err_free_irq; - - platform_set_drvdata(pdev, nfc); - - ar934x_nfc_hw_init(nfc); - - ret = nand_scan_ident(mtd, 1, NULL); - if (ret) { - dev_err(&pdev->dev, "nand_scan_ident failed, err:%d\n", ret); - goto err_free_buf; - } - - ret = ar934x_nfc_init_tail(mtd); - if (ret) { - dev_err(&pdev->dev, "init tail failed, err:%d\n", ret); - goto err_free_buf; - } - - if (pdata->scan_fixup) { - ret = pdata->scan_fixup(mtd); - if (ret) - goto err_free_buf; - } - - switch (pdata->ecc_mode) { - case AR934X_NFC_ECC_SOFT: - nand->ecc.mode = NAND_ECC_SOFT; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0) - nand->ecc.algo = NAND_ECC_HAMMING; -#endif - break; - - case AR934X_NFC_ECC_SOFT_BCH: -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - nand->ecc.mode = NAND_ECC_SOFT_BCH; -#else - nand->ecc.mode = NAND_ECC_SOFT; - nand->ecc.algo = NAND_ECC_BCH; -#endif - break; - - case AR934X_NFC_ECC_HW: - ret = ar934x_nfc_setup_hwecc(nfc); - if (ret) - goto err_free_buf; - - break; - - default: - dev_err(nfc->parent, "unknown ECC mode %d\n", pdata->ecc_mode); - return -EINVAL; - } - - ret = nand_scan_tail(mtd); - if (ret) { - dev_err(&pdev->dev, "scan tail failed, err:%d\n", ret); - goto err_free_buf; - } - - memset(&ppdata, '\0', sizeof(ppdata)); - ret = mtd_device_parse_register(mtd, part_probes, &ppdata, - pdata->parts, pdata->nr_parts); - if (ret) { - dev_err(&pdev->dev, "unable to register mtd, err:%d\n", ret); - goto err_free_buf; - } - - return 0; - -err_free_buf: - ar934x_nfc_free_buf(nfc); -err_free_irq: - free_irq(nfc->irq, nfc); - return ret; -} - -static int -ar934x_nfc_remove(struct platform_device *pdev) -{ - struct ar934x_nfc *nfc; - struct mtd_info *mtd; - - nfc = platform_get_drvdata(pdev); - if (nfc) { - mtd = ar934x_nfc_to_mtd(nfc); - nand_release(&nfc->nand_chip); - ar934x_nfc_free_buf(nfc); - free_irq(nfc->irq, nfc); - } - - return 0; -} - -static struct platform_driver ar934x_nfc_driver = { - .probe = ar934x_nfc_probe, - .remove = ar934x_nfc_remove, - .driver = { - .name = AR934X_NFC_DRIVER_NAME, - .owner = THIS_MODULE, - }, -}; - -module_platform_driver(ar934x_nfc_driver); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); -MODULE_DESCRIPTION("Atheros AR934x NAND Flash Controller driver"); -MODULE_ALIAS("platform:" AR934X_NFC_DRIVER_NAME); diff --git a/target/linux/ar71xx/files/drivers/mtd/nand/rb4xx_nand.c b/target/linux/ar71xx/files/drivers/mtd/nand/rb4xx_nand.c deleted file mode 100644 index 7dde613131..0000000000 --- a/target/linux/ar71xx/files/drivers/mtd/nand/rb4xx_nand.c +++ /dev/null @@ -1,396 +0,0 @@ -/* - * NAND flash driver for the MikroTik RouterBoard 4xx series - * - * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This file was based on the driver for Linux 2.6.22 published by - * MikroTik for their RouterBoard 4xx series devices. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/version.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0) -#include <linux/mtd/nand.h> -#else -#include <linux/mtd/rawnand.h> -#endif -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/slab.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/rb4xx_cpld.h> - -#define DRV_NAME "rb4xx-nand" -#define DRV_VERSION "0.2.0" -#define DRV_DESC "NAND flash driver for RouterBoard 4xx series" - -#define RB4XX_NAND_GPIO_READY 5 -#define RB4XX_NAND_GPIO_ALE 37 -#define RB4XX_NAND_GPIO_CLE 38 -#define RB4XX_NAND_GPIO_NCE 39 - -struct rb4xx_nand_info { - struct nand_chip chip; -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - struct mtd_info mtd; -#endif -}; - -static inline struct rb4xx_nand_info *mtd_to_rbinfo(struct mtd_info *mtd) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - return container_of(mtd, struct rb4xx_nand_info, mtd); -#else - struct nand_chip *chip = mtd_to_nand(mtd); - - return container_of(chip, struct rb4xx_nand_info, chip); -#endif -} - -static struct mtd_info *rbinfo_to_mtd(struct rb4xx_nand_info *nfc) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - return &nfc->mtd; -#else - return nand_to_mtd(&nfc->chip); -#endif -} - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) -/* - * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader - * will not be able to find the kernel that we load. - */ -static struct nand_ecclayout rb4xx_nand_ecclayout = { - .eccbytes = 6, - .eccpos = { 8, 9, 10, 13, 14, 15 }, - .oobavail = 9, - .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } -}; - -#else - -static int rb4xx_ooblayout_ecc(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - switch (section) { - case 0: - oobregion->offset = 8; - oobregion->length = 3; - return 0; - case 1: - oobregion->offset = 13; - oobregion->length = 3; - return 0; - default: - return -ERANGE; - } -} - -static int rb4xx_ooblayout_free(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - switch (section) { - case 0: - oobregion->offset = 0; - oobregion->length = 4; - return 0; - case 1: - oobregion->offset = 4; - oobregion->length = 1; - return 0; - case 2: - oobregion->offset = 6; - oobregion->length = 2; - return 0; - case 3: - oobregion->offset = 11; - oobregion->length = 2; - return 0; - default: - return -ERANGE; - } -} - -static const struct mtd_ooblayout_ops rb4xx_nand_ecclayout_ops = { - .ecc = rb4xx_ooblayout_ecc, - .free = rb4xx_ooblayout_free, -}; -#endif /* < 4.6 */ - -static struct mtd_partition rb4xx_nand_partitions[] = { - { - .name = "booter", - .offset = 0, - .size = (256 * 1024), - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .offset = (256 * 1024), - .size = (4 * 1024 * 1024) - (256 * 1024), - }, - { - .name = "ubi", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static int rb4xx_nand_dev_ready(struct mtd_info *mtd) -{ - return gpio_get_value_cansleep(RB4XX_NAND_GPIO_READY); -} - -static void rb4xx_nand_write_cmd(unsigned char cmd) -{ - unsigned char data = cmd; - int err; - - err = rb4xx_cpld_write(&data, 1); - if (err) - pr_err("rb4xx_nand: write cmd failed, err=%d\n", err); -} - -static void rb4xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - if (ctrl & NAND_CTRL_CHANGE) { - gpio_set_value_cansleep(RB4XX_NAND_GPIO_CLE, - (ctrl & NAND_CLE) ? 1 : 0); - gpio_set_value_cansleep(RB4XX_NAND_GPIO_ALE, - (ctrl & NAND_ALE) ? 1 : 0); - gpio_set_value_cansleep(RB4XX_NAND_GPIO_NCE, - (ctrl & NAND_NCE) ? 0 : 1); - } - - if (cmd != NAND_CMD_NONE) - rb4xx_nand_write_cmd(cmd); -} - -static unsigned char rb4xx_nand_read_byte(struct mtd_info *mtd) -{ - unsigned char data = 0; - int err; - - err = rb4xx_cpld_read(&data, 1); - if (err) { - pr_err("rb4xx_nand: read data failed, err=%d\n", err); - data = 0xff; - } - - return data; -} - -static void rb4xx_nand_write_buf(struct mtd_info *mtd, const unsigned char *buf, - int len) -{ - int err; - - err = rb4xx_cpld_write(buf, len); - if (err) - pr_err("rb4xx_nand: write buf failed, err=%d\n", err); -} - -static void rb4xx_nand_read_buf(struct mtd_info *mtd, unsigned char *buf, - int len) -{ - int err; - - err = rb4xx_cpld_read(buf, len); - if (err) - pr_err("rb4xx_nand: read buf failed, err=%d\n", err); -} - -static int rb4xx_nand_probe(struct platform_device *pdev) -{ - struct rb4xx_nand_info *info; - struct mtd_info *mtd; - int ret; - - printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n"); - - ret = gpio_request(RB4XX_NAND_GPIO_READY, "NAND RDY"); - if (ret) { - dev_err(&pdev->dev, "unable to request gpio %d\n", - RB4XX_NAND_GPIO_READY); - goto err; - } - - ret = gpio_direction_input(RB4XX_NAND_GPIO_READY); - if (ret) { - dev_err(&pdev->dev, "unable to set input mode on gpio %d\n", - RB4XX_NAND_GPIO_READY); - goto err_free_gpio_ready; - } - - ret = gpio_request(RB4XX_NAND_GPIO_ALE, "NAND ALE"); - if (ret) { - dev_err(&pdev->dev, "unable to request gpio %d\n", - RB4XX_NAND_GPIO_ALE); - goto err_free_gpio_ready; - } - - ret = gpio_direction_output(RB4XX_NAND_GPIO_ALE, 0); - if (ret) { - dev_err(&pdev->dev, "unable to set output mode on gpio %d\n", - RB4XX_NAND_GPIO_ALE); - goto err_free_gpio_ale; - } - - ret = gpio_request(RB4XX_NAND_GPIO_CLE, "NAND CLE"); - if (ret) { - dev_err(&pdev->dev, "unable to request gpio %d\n", - RB4XX_NAND_GPIO_CLE); - goto err_free_gpio_ale; - } - - ret = gpio_direction_output(RB4XX_NAND_GPIO_CLE, 0); - if (ret) { - dev_err(&pdev->dev, "unable to set output mode on gpio %d\n", - RB4XX_NAND_GPIO_CLE); - goto err_free_gpio_cle; - } - - ret = gpio_request(RB4XX_NAND_GPIO_NCE, "NAND NCE"); - if (ret) { - dev_err(&pdev->dev, "unable to request gpio %d\n", - RB4XX_NAND_GPIO_NCE); - goto err_free_gpio_cle; - } - - ret = gpio_direction_output(RB4XX_NAND_GPIO_NCE, 1); - if (ret) { - dev_err(&pdev->dev, "unable to set output mode on gpio %d\n", - RB4XX_NAND_GPIO_ALE); - goto err_free_gpio_nce; - } - - info = kzalloc(sizeof(*info), GFP_KERNEL); - if (!info) { - dev_err(&pdev->dev, "rb4xx-nand: no memory for private data\n"); - ret = -ENOMEM; - goto err_free_gpio_nce; - } - - info->chip.priv = &info; - mtd = rbinfo_to_mtd(info); - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - mtd->priv = &info->chip; -#endif - mtd->owner = THIS_MODULE; - - info->chip.cmd_ctrl = rb4xx_nand_cmd_ctrl; - info->chip.dev_ready = rb4xx_nand_dev_ready; - info->chip.read_byte = rb4xx_nand_read_byte; - info->chip.write_buf = rb4xx_nand_write_buf; - info->chip.read_buf = rb4xx_nand_read_buf; - - info->chip.chip_delay = 25; - info->chip.ecc.mode = NAND_ECC_SOFT; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0) - info->chip.ecc.algo = NAND_ECC_HAMMING; -#endif - info->chip.options = NAND_NO_SUBPAGE_WRITE; - - platform_set_drvdata(pdev, info); - - ret = nand_scan_ident(mtd, 1, NULL); - if (ret) { - ret = -ENXIO; - goto err_free_info; - } - - if (mtd->writesize == 512) -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - info->chip.ecc.layout = &rb4xx_nand_ecclayout; -#else - mtd_set_ooblayout(mtd, &rb4xx_nand_ecclayout_ops); -#endif - - ret = nand_scan_tail(mtd); - if (ret) { - return -ENXIO; - goto err_set_drvdata; - } - - mtd_device_register(mtd, rb4xx_nand_partitions, - ARRAY_SIZE(rb4xx_nand_partitions)); - if (ret) - goto err_release_nand; - - return 0; - -err_release_nand: - nand_release(&info->chip); -err_set_drvdata: - platform_set_drvdata(pdev, NULL); -err_free_info: - kfree(info); -err_free_gpio_nce: - gpio_free(RB4XX_NAND_GPIO_NCE); -err_free_gpio_cle: - gpio_free(RB4XX_NAND_GPIO_CLE); -err_free_gpio_ale: - gpio_free(RB4XX_NAND_GPIO_ALE); -err_free_gpio_ready: - gpio_free(RB4XX_NAND_GPIO_READY); -err: - return ret; -} - -static int rb4xx_nand_remove(struct platform_device *pdev) -{ - struct rb4xx_nand_info *info = platform_get_drvdata(pdev); - - nand_release(&info->chip); - platform_set_drvdata(pdev, NULL); - kfree(info); - gpio_free(RB4XX_NAND_GPIO_NCE); - gpio_free(RB4XX_NAND_GPIO_CLE); - gpio_free(RB4XX_NAND_GPIO_ALE); - gpio_free(RB4XX_NAND_GPIO_READY); - - return 0; -} - -static struct platform_driver rb4xx_nand_driver = { - .probe = rb4xx_nand_probe, - .remove = rb4xx_nand_remove, - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init rb4xx_nand_init(void) -{ - return platform_driver_register(&rb4xx_nand_driver); -} - -static void __exit rb4xx_nand_exit(void) -{ - platform_driver_unregister(&rb4xx_nand_driver); -} - -module_init(rb4xx_nand_init); -module_exit(rb4xx_nand_exit); - -MODULE_DESCRIPTION(DRV_DESC); -MODULE_VERSION(DRV_VERSION); -MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); -MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>"); -MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c b/target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c deleted file mode 100644 index a578c54ad3..0000000000 --- a/target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c +++ /dev/null @@ -1,440 +0,0 @@ -/* - * NAND flash driver for the MikroTik RouterBOARD 750 - * - * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/version.h> -#include <linux/kernel.h> -#include <linux/module.h> -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0) -#include <linux/mtd/nand.h> -#else -#include <linux/mtd/rawnand.h> -#endif -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/slab.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/mach-rb750.h> - -#define DRV_NAME "rb750-nand" -#define DRV_VERSION "0.1.0" -#define DRV_DESC "NAND flash driver for the RouterBOARD 750" - -#define RB750_NAND_IO0 BIT(RB750_GPIO_NAND_IO0) -#define RB750_NAND_ALE BIT(RB750_GPIO_NAND_ALE) -#define RB750_NAND_CLE BIT(RB750_GPIO_NAND_CLE) -#define RB750_NAND_NRE BIT(RB750_GPIO_NAND_NRE) -#define RB750_NAND_NWE BIT(RB750_GPIO_NAND_NWE) -#define RB750_NAND_RDY BIT(RB750_GPIO_NAND_RDY) - -#define RB750_NAND_DATA_SHIFT 1 -#define RB750_NAND_DATA_BITS (0xff << RB750_NAND_DATA_SHIFT) -#define RB750_NAND_INPUT_BITS (RB750_NAND_DATA_BITS | RB750_NAND_RDY) -#define RB750_NAND_OUTPUT_BITS (RB750_NAND_ALE | RB750_NAND_CLE | \ - RB750_NAND_NRE | RB750_NAND_NWE) - -struct rb750_nand_info { - struct nand_chip chip; -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - struct mtd_info mtd; -#endif - struct rb7xx_nand_platform_data *pdata; -}; - -static inline struct rb750_nand_info *mtd_to_rbinfo(struct mtd_info *mtd) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - return container_of(mtd, struct rb750_nand_info, mtd); -#else - struct nand_chip *chip = mtd_to_nand(mtd); - - return container_of(chip, struct rb750_nand_info, chip); -#endif -} - -static struct mtd_info *rbinfo_to_mtd(struct rb750_nand_info *nfc) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - return &nfc->mtd; -#else - return nand_to_mtd(&nfc->chip); -#endif -} - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) -/* - * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader - * will not be able to find the kernel that we load. - */ -static struct nand_ecclayout rb750_nand_ecclayout = { - .eccbytes = 6, - .eccpos = { 8, 9, 10, 13, 14, 15 }, - .oobavail = 9, - .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } -}; - -#else - -static int rb750_ooblayout_ecc(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - switch (section) { - case 0: - oobregion->offset = 8; - oobregion->length = 3; - return 0; - case 1: - oobregion->offset = 13; - oobregion->length = 3; - return 0; - default: - return -ERANGE; - } -} - -static int rb750_ooblayout_free(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - switch (section) { - case 0: - oobregion->offset = 0; - oobregion->length = 4; - return 0; - case 1: - oobregion->offset = 4; - oobregion->length = 1; - return 0; - case 2: - oobregion->offset = 6; - oobregion->length = 2; - return 0; - case 3: - oobregion->offset = 11; - oobregion->length = 2; - return 0; - default: - return -ERANGE; - } -} - -static const struct mtd_ooblayout_ops rb750_nand_ecclayout_ops = { - .ecc = rb750_ooblayout_ecc, - .free = rb750_ooblayout_free, -}; -#endif /* < 4.6 */ - -static struct mtd_partition rb750_nand_partitions[] = { - { - .name = "booter", - .offset = 0, - .size = (256 * 1024), - .mask_flags = MTD_WRITEABLE, - }, { - .name = "kernel", - .offset = (256 * 1024), - .size = (4 * 1024 * 1024) - (256 * 1024), - }, { - .name = "ubi", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static void rb750_nand_write(const u8 *buf, unsigned len) -{ - void __iomem *base = ath79_gpio_base; - u32 out; - u32 t; - unsigned i; - - /* set data lines to output mode */ - t = __raw_readl(base + AR71XX_GPIO_REG_OE); - __raw_writel(t | RB750_NAND_DATA_BITS, base + AR71XX_GPIO_REG_OE); - - out = __raw_readl(base + AR71XX_GPIO_REG_OUT); - out &= ~(RB750_NAND_DATA_BITS | RB750_NAND_NWE); - for (i = 0; i != len; i++) { - u32 data; - - data = buf[i]; - data <<= RB750_NAND_DATA_SHIFT; - data |= out; - __raw_writel(data, base + AR71XX_GPIO_REG_OUT); - - __raw_writel(data | RB750_NAND_NWE, base + AR71XX_GPIO_REG_OUT); - /* flush write */ - __raw_readl(base + AR71XX_GPIO_REG_OUT); - } - - /* set data lines to input mode */ - t = __raw_readl(base + AR71XX_GPIO_REG_OE); - __raw_writel(t & ~RB750_NAND_DATA_BITS, base + AR71XX_GPIO_REG_OE); - /* flush write */ - __raw_readl(base + AR71XX_GPIO_REG_OE); -} - -static void rb750_nand_read(u8 *read_buf, unsigned len) -{ - void __iomem *base = ath79_gpio_base; - unsigned i; - - for (i = 0; i < len; i++) { - u8 data; - - /* activate RE line */ - __raw_writel(RB750_NAND_NRE, base + AR71XX_GPIO_REG_CLEAR); - /* flush write */ - __raw_readl(base + AR71XX_GPIO_REG_CLEAR); - - /* read input lines */ - data = __raw_readl(base + AR71XX_GPIO_REG_IN) >> - RB750_NAND_DATA_SHIFT; - - /* deactivate RE line */ - __raw_writel(RB750_NAND_NRE, base + AR71XX_GPIO_REG_SET); - - read_buf[i] = data; - } -} - -static void rb750_nand_select_chip(struct mtd_info *mtd, int chip) -{ - struct rb750_nand_info *rbinfo = mtd_to_rbinfo(mtd); - void __iomem *base = ath79_gpio_base; - u32 t; - - if (chip >= 0) { - rbinfo->pdata->enable_pins(); - - /* set input mode for data lines */ - t = __raw_readl(base + AR71XX_GPIO_REG_OE); - __raw_writel(t & ~RB750_NAND_INPUT_BITS, - base + AR71XX_GPIO_REG_OE); - - /* deactivate RE and WE lines */ - __raw_writel(RB750_NAND_NRE | RB750_NAND_NWE, - base + AR71XX_GPIO_REG_SET); - /* flush write */ - (void) __raw_readl(base + AR71XX_GPIO_REG_SET); - - /* activate CE line */ - __raw_writel(rbinfo->pdata->nce_line, - base + AR71XX_GPIO_REG_CLEAR); - } else { - /* deactivate CE line */ - __raw_writel(rbinfo->pdata->nce_line, - base + AR71XX_GPIO_REG_SET); - /* flush write */ - (void) __raw_readl(base + AR71XX_GPIO_REG_SET); - - t = __raw_readl(base + AR71XX_GPIO_REG_OE); - __raw_writel(t | RB750_NAND_IO0 | RB750_NAND_RDY, - base + AR71XX_GPIO_REG_OE); - - rbinfo->pdata->disable_pins(); - } -} - -static int rb750_nand_dev_ready(struct mtd_info *mtd) -{ - void __iomem *base = ath79_gpio_base; - - return !!(__raw_readl(base + AR71XX_GPIO_REG_IN) & RB750_NAND_RDY); -} - -static void rb750_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - if (ctrl & NAND_CTRL_CHANGE) { - void __iomem *base = ath79_gpio_base; - u32 t; - - t = __raw_readl(base + AR71XX_GPIO_REG_OUT); - - t &= ~(RB750_NAND_CLE | RB750_NAND_ALE); - t |= (ctrl & NAND_CLE) ? RB750_NAND_CLE : 0; - t |= (ctrl & NAND_ALE) ? RB750_NAND_ALE : 0; - - __raw_writel(t, base + AR71XX_GPIO_REG_OUT); - /* flush write */ - __raw_readl(base + AR71XX_GPIO_REG_OUT); - } - - if (cmd != NAND_CMD_NONE) { - u8 t = cmd; - rb750_nand_write(&t, 1); - } -} - -static u8 rb750_nand_read_byte(struct mtd_info *mtd) -{ - u8 data = 0; - rb750_nand_read(&data, 1); - return data; -} - -static void rb750_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len) -{ - rb750_nand_read(buf, len); -} - -static void rb750_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len) -{ - rb750_nand_write(buf, len); -} - -static void __init rb750_nand_gpio_init(struct rb750_nand_info *info) -{ - void __iomem *base = ath79_gpio_base; - u32 out; - u32 t; - - out = __raw_readl(base + AR71XX_GPIO_REG_OUT); - - /* setup output levels */ - __raw_writel(RB750_NAND_NCE | RB750_NAND_NRE | RB750_NAND_NWE, - base + AR71XX_GPIO_REG_SET); - - __raw_writel(RB750_NAND_ALE | RB750_NAND_CLE, - base + AR71XX_GPIO_REG_CLEAR); - - /* setup input lines */ - t = __raw_readl(base + AR71XX_GPIO_REG_OE); - __raw_writel(t & ~(RB750_NAND_INPUT_BITS), base + AR71XX_GPIO_REG_OE); - - /* setup output lines */ - t = __raw_readl(base + AR71XX_GPIO_REG_OE); - t |= RB750_NAND_OUTPUT_BITS; - t |= info->pdata->nce_line; - __raw_writel(t, base + AR71XX_GPIO_REG_OE); - - info->pdata->latch_change(~out & RB750_NAND_IO0, out & RB750_NAND_IO0); -} - -static int rb750_nand_probe(struct platform_device *pdev) -{ - struct rb750_nand_info *info; - struct rb7xx_nand_platform_data *pdata; - struct mtd_info *mtd; - int ret; - - printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n"); - - pdata = pdev->dev.platform_data; - if (!pdata) - return -EINVAL; - - info = kzalloc(sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - info->chip.priv = &info; - - mtd = rbinfo_to_mtd(info); -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - mtd->priv = &info->chip; -#endif - mtd->owner = THIS_MODULE; - - info->chip.select_chip = rb750_nand_select_chip; - info->chip.cmd_ctrl = rb750_nand_cmd_ctrl; - info->chip.dev_ready = rb750_nand_dev_ready; - info->chip.read_byte = rb750_nand_read_byte; - info->chip.write_buf = rb750_nand_write_buf; - info->chip.read_buf = rb750_nand_read_buf; - - info->chip.chip_delay = 25; - info->chip.ecc.mode = NAND_ECC_SOFT; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0) - info->chip.ecc.algo = NAND_ECC_HAMMING; -#endif - info->chip.options = NAND_NO_SUBPAGE_WRITE; - - info->pdata = pdata; - - platform_set_drvdata(pdev, info); - - rb750_nand_gpio_init(info); - - ret = nand_scan_ident(mtd, 1, NULL); - if (ret) { - ret = -ENXIO; - goto err_free_info; - } - - if (mtd->writesize == 512) -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - info->chip.ecc.layout = &rb750_nand_ecclayout; -#else - mtd_set_ooblayout(mtd, &rb750_nand_ecclayout_ops); -#endif - - ret = nand_scan_tail(mtd); - if (ret) { - return -ENXIO; - goto err_set_drvdata; - } - - ret = mtd_device_register(mtd, rb750_nand_partitions, - ARRAY_SIZE(rb750_nand_partitions)); - if (ret) - goto err_release_nand; - - return 0; - -err_release_nand: - nand_release(&info->chip); -err_set_drvdata: - platform_set_drvdata(pdev, NULL); -err_free_info: - kfree(info); - return ret; -} - -static int rb750_nand_remove(struct platform_device *pdev) -{ - struct rb750_nand_info *info = platform_get_drvdata(pdev); - - nand_release(&info->chip); - platform_set_drvdata(pdev, NULL); - kfree(info); - - return 0; -} - -static struct platform_driver rb750_nand_driver = { - .probe = rb750_nand_probe, - .remove = rb750_nand_remove, - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init rb750_nand_init(void) -{ - return platform_driver_register(&rb750_nand_driver); -} - -static void __exit rb750_nand_exit(void) -{ - platform_driver_unregister(&rb750_nand_driver); -} - -module_init(rb750_nand_init); -module_exit(rb750_nand_exit); - -MODULE_DESCRIPTION(DRV_DESC); -MODULE_VERSION(DRV_VERSION); -MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); -MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ar71xx/files/drivers/mtd/nand/rb91x_nand.c b/target/linux/ar71xx/files/drivers/mtd/nand/rb91x_nand.c deleted file mode 100644 index 94e709b7e4..0000000000 --- a/target/linux/ar71xx/files/drivers/mtd/nand/rb91x_nand.c +++ /dev/null @@ -1,464 +0,0 @@ -/* - * NAND flash driver for the MikroTik RouterBOARD 91x series - * - * Copyright (C) 2013-2014 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/version.h> -#include <linux/kernel.h> -#include <linux/spinlock.h> -#include <linux/module.h> -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0) -#include <linux/mtd/nand.h> -#else -#include <linux/mtd/rawnand.h> -#endif -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/gpio.h> -#include <linux/platform_data/rb91x_nand.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#define DRV_DESC "NAND flash driver for the RouterBOARD 91x series" - -#define RB91X_NAND_NRWE BIT(12) - -#define RB91X_NAND_DATA_BITS (BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) |\ - BIT(13) | BIT(14) | BIT(15)) - -#define RB91X_NAND_INPUT_BITS (RB91X_NAND_DATA_BITS | RB91X_NAND_RDY) -#define RB91X_NAND_OUTPUT_BITS (RB91X_NAND_DATA_BITS | RB91X_NAND_NRWE) - -#define RB91X_NAND_LOW_DATA_MASK 0x1f -#define RB91X_NAND_HIGH_DATA_MASK 0xe0 -#define RB91X_NAND_HIGH_DATA_SHIFT 8 - -struct rb91x_nand_info { - struct nand_chip chip; -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - struct mtd_info mtd; -#endif - struct device *dev; - - int gpio_nce; - int gpio_ale; - int gpio_cle; - int gpio_rdy; - int gpio_read; - int gpio_nrw; - int gpio_nle; -}; - -static inline struct rb91x_nand_info *mtd_to_rbinfo(struct mtd_info *mtd) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - return container_of(mtd, struct rb91x_nand_info, mtd); -#else - struct nand_chip *chip = mtd_to_nand(mtd); - - return container_of(chip, struct rb91x_nand_info, chip); -#endif -} - -static struct mtd_info *rbinfo_to_mtd(struct rb91x_nand_info *nfc) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - return &nfc->mtd; -#else - return nand_to_mtd(&nfc->chip); -#endif -} - - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) -/* - * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader - * will not be able to find the kernel that we load. - */ -static struct nand_ecclayout rb91x_nand_ecclayout = { - .eccbytes = 6, - .eccpos = { 8, 9, 10, 13, 14, 15 }, - .oobavail = 9, - .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } -}; - -#else - -static int rb91x_ooblayout_ecc(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - switch (section) { - case 0: - oobregion->offset = 8; - oobregion->length = 3; - return 0; - case 1: - oobregion->offset = 13; - oobregion->length = 3; - return 0; - default: - return -ERANGE; - } -} - -static int rb91x_ooblayout_free(struct mtd_info *mtd, int section, - struct mtd_oob_region *oobregion) -{ - switch (section) { - case 0: - oobregion->offset = 0; - oobregion->length = 4; - return 0; - case 1: - oobregion->offset = 4; - oobregion->length = 1; - return 0; - case 2: - oobregion->offset = 6; - oobregion->length = 2; - return 0; - case 3: - oobregion->offset = 11; - oobregion->length = 2; - return 0; - default: - return -ERANGE; - } -} - -static const struct mtd_ooblayout_ops rb91x_nand_ecclayout_ops = { - .ecc = rb91x_ooblayout_ecc, - .free = rb91x_ooblayout_free, -}; -#endif /* < 4.6 */ - -static struct mtd_partition rb91x_nand_partitions[] = { - { - .name = "booter", - .offset = 0, - .size = (256 * 1024), - .mask_flags = MTD_WRITEABLE, - }, { - .name = "kernel", - .offset = (256 * 1024), - .size = (4 * 1024 * 1024) - (256 * 1024), - }, { - .name = "ubi", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static void rb91x_nand_write(struct rb91x_nand_info *rbni, - const u8 *buf, - unsigned len) -{ - void __iomem *base = ath79_gpio_base; - u32 oe_reg; - u32 out_reg; - u32 out; - unsigned i; - - /* enable the latch */ - gpio_set_value_cansleep(rbni->gpio_nle, 0); - - oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE); - out_reg = __raw_readl(base + AR71XX_GPIO_REG_OUT); - - /* set data lines to output mode */ - __raw_writel(oe_reg & ~(RB91X_NAND_DATA_BITS | RB91X_NAND_NRWE), - base + AR71XX_GPIO_REG_OE); - - out = out_reg & ~(RB91X_NAND_DATA_BITS | RB91X_NAND_NRWE); - for (i = 0; i != len; i++) { - u32 data; - - data = (buf[i] & RB91X_NAND_HIGH_DATA_MASK) << - RB91X_NAND_HIGH_DATA_SHIFT; - data |= buf[i] & RB91X_NAND_LOW_DATA_MASK; - data |= out; - __raw_writel(data, base + AR71XX_GPIO_REG_OUT); - - /* deactivate WE line */ - data |= RB91X_NAND_NRWE; - __raw_writel(data, base + AR71XX_GPIO_REG_OUT); - /* flush write */ - __raw_readl(base + AR71XX_GPIO_REG_OUT); - } - - /* restore registers */ - __raw_writel(out_reg, base + AR71XX_GPIO_REG_OUT); - __raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE); - /* flush write */ - __raw_readl(base + AR71XX_GPIO_REG_OUT); - - /* disable the latch */ - gpio_set_value_cansleep(rbni->gpio_nle, 1); -} - -static void rb91x_nand_read(struct rb91x_nand_info *rbni, - u8 *read_buf, - unsigned len) -{ - void __iomem *base = ath79_gpio_base; - u32 oe_reg; - u32 out_reg; - unsigned i; - - /* enable read mode */ - gpio_set_value_cansleep(rbni->gpio_read, 1); - - /* enable latch */ - gpio_set_value_cansleep(rbni->gpio_nle, 0); - - /* save registers */ - oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE); - out_reg = __raw_readl(base + AR71XX_GPIO_REG_OUT); - - /* set data lines to input mode */ - __raw_writel(oe_reg | RB91X_NAND_DATA_BITS, - base + AR71XX_GPIO_REG_OE); - - for (i = 0; i < len; i++) { - u32 in; - u8 data; - - /* activate RE line */ - __raw_writel(RB91X_NAND_NRWE, base + AR71XX_GPIO_REG_CLEAR); - /* flush write */ - __raw_readl(base + AR71XX_GPIO_REG_CLEAR); - - /* read input lines */ - in = __raw_readl(base + AR71XX_GPIO_REG_IN); - - /* deactivate RE line */ - __raw_writel(RB91X_NAND_NRWE, base + AR71XX_GPIO_REG_SET); - - data = (in & RB91X_NAND_LOW_DATA_MASK); - data |= (in >> RB91X_NAND_HIGH_DATA_SHIFT) & - RB91X_NAND_HIGH_DATA_MASK; - - read_buf[i] = data; - } - - /* restore registers */ - __raw_writel(out_reg, base + AR71XX_GPIO_REG_OUT); - __raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE); - /* flush write */ - __raw_readl(base + AR71XX_GPIO_REG_OUT); - - /* disable latch */ - gpio_set_value_cansleep(rbni->gpio_nle, 1); - - /* disable read mode */ - gpio_set_value_cansleep(rbni->gpio_read, 0); -} - -static int rb91x_nand_dev_ready(struct mtd_info *mtd) -{ - struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd); - - return gpio_get_value_cansleep(rbni->gpio_rdy); -} - -static void rb91x_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd); - - if (ctrl & NAND_CTRL_CHANGE) { - gpio_set_value_cansleep(rbni->gpio_cle, - (ctrl & NAND_CLE) ? 1 : 0); - gpio_set_value_cansleep(rbni->gpio_ale, - (ctrl & NAND_ALE) ? 1 : 0); - gpio_set_value_cansleep(rbni->gpio_nce, - (ctrl & NAND_NCE) ? 0 : 1); - } - - if (cmd != NAND_CMD_NONE) { - u8 t = cmd; - - rb91x_nand_write(rbni, &t, 1); - } -} - -static u8 rb91x_nand_read_byte(struct mtd_info *mtd) -{ - struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd); - u8 data = 0xff; - - rb91x_nand_read(rbni, &data, 1); - - return data; -} - -static void rb91x_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len) -{ - struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd); - - rb91x_nand_read(rbni, buf, len); -} - -static void rb91x_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len) -{ - struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd); - - rb91x_nand_write(rbni, buf, len); -} - -static int rb91x_nand_gpio_init(struct rb91x_nand_info *info) -{ - int ret; - - /* - * Ensure that the LATCH is disabled before initializing - * control lines. - */ - ret = devm_gpio_request_one(info->dev, info->gpio_nle, - GPIOF_OUT_INIT_HIGH, "LATCH enable"); - if (ret) - return ret; - - ret = devm_gpio_request_one(info->dev, info->gpio_nce, - GPIOF_OUT_INIT_HIGH, "NAND nCE"); - if (ret) - return ret; - - ret = devm_gpio_request_one(info->dev, info->gpio_nrw, - GPIOF_OUT_INIT_HIGH, "NAND nRW"); - if (ret) - return ret; - - ret = devm_gpio_request_one(info->dev, info->gpio_cle, - GPIOF_OUT_INIT_LOW, "NAND CLE"); - if (ret) - return ret; - - ret = devm_gpio_request_one(info->dev, info->gpio_ale, - GPIOF_OUT_INIT_LOW, "NAND ALE"); - if (ret) - return ret; - - ret = devm_gpio_request_one(info->dev, info->gpio_read, - GPIOF_OUT_INIT_LOW, "NAND READ"); - if (ret) - return ret; - - ret = devm_gpio_request_one(info->dev, info->gpio_rdy, - GPIOF_IN, "NAND RDY"); - return ret; -} - -static int rb91x_nand_probe(struct platform_device *pdev) -{ - struct rb91x_nand_info *rbni; - struct rb91x_nand_platform_data *pdata; - struct mtd_info *mtd; - int ret; - - pr_info(DRV_DESC "\n"); - - pdata = dev_get_platdata(&pdev->dev); - if (!pdata) - return -EINVAL; - - rbni = devm_kzalloc(&pdev->dev, sizeof(*rbni), GFP_KERNEL); - if (!rbni) - return -ENOMEM; - - rbni->dev = &pdev->dev; - rbni->gpio_nce = pdata->gpio_nce; - rbni->gpio_ale = pdata->gpio_ale; - rbni->gpio_cle = pdata->gpio_cle; - rbni->gpio_read = pdata->gpio_read; - rbni->gpio_nrw = pdata->gpio_nrw; - rbni->gpio_rdy = pdata->gpio_rdy; - rbni->gpio_nle = pdata->gpio_nle; - - rbni->chip.priv = &rbni; - mtd = rbinfo_to_mtd(rbni); - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - mtd->priv = &rbni->chip; -#endif - mtd->owner = THIS_MODULE; - - rbni->chip.cmd_ctrl = rb91x_nand_cmd_ctrl; - rbni->chip.dev_ready = rb91x_nand_dev_ready; - rbni->chip.read_byte = rb91x_nand_read_byte; - rbni->chip.write_buf = rb91x_nand_write_buf; - rbni->chip.read_buf = rb91x_nand_read_buf; - - rbni->chip.chip_delay = 25; - rbni->chip.ecc.mode = NAND_ECC_SOFT; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0) - rbni->chip.ecc.algo = NAND_ECC_HAMMING; -#endif - rbni->chip.options = NAND_NO_SUBPAGE_WRITE; - - platform_set_drvdata(pdev, rbni); - - ret = rb91x_nand_gpio_init(rbni); - if (ret) - return ret; - - ret = nand_scan_ident(mtd, 1, NULL); - if (ret) - return ret; - - if (mtd->writesize == 512) -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) - rbni->chip.ecc.layout = &rb91x_nand_ecclayout; -#else - mtd_set_ooblayout(mtd, &rb91x_nand_ecclayout_ops); -#endif - - ret = nand_scan_tail(mtd); - if (ret) - return ret; - - ret = mtd_device_register(mtd, rb91x_nand_partitions, - ARRAY_SIZE(rb91x_nand_partitions)); - if (ret) - goto err_release_nand; - - return 0; - -err_release_nand: - nand_release(&rbni->chip); - return ret; -} - -static int rb91x_nand_remove(struct platform_device *pdev) -{ - struct rb91x_nand_info *info = platform_get_drvdata(pdev); - - nand_release(&info->chip); - - return 0; -} - -static struct platform_driver rb91x_nand_driver = { - .probe = rb91x_nand_probe, - .remove = rb91x_nand_remove, - .driver = { - .name = RB91X_NAND_DRIVER_NAME, - .owner = THIS_MODULE, - }, -}; - -module_platform_driver(rb91x_nand_driver); - -MODULE_DESCRIPTION(DRV_DESC); -MODULE_VERSION(DRV_VERSION); -MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); -MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ar71xx/files/drivers/mtd/tplinkpart.c b/target/linux/ar71xx/files/drivers/mtd/tplinkpart.c deleted file mode 100644 index 1b94163b83..0000000000 --- a/target/linux/ar71xx/files/drivers/mtd/tplinkpart.c +++ /dev/null @@ -1,235 +0,0 @@ -/* - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/vmalloc.h> -#include <linux/magic.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/version.h> - -#define TPLINK_NUM_PARTS 5 -#define TPLINK_HEADER_V1 0x01000000 -#define TPLINK_HEADER_V2 0x02000000 -#define MD5SUM_LEN 16 - -#define TPLINK_ART_LEN 0x10000 -#define TPLINK_KERNEL_OFFS 0x20000 -#define TPLINK_64K_KERNEL_OFFS 0x10000 - -struct tplink_fw_header { - uint32_t version; /* header version */ - char vendor_name[24]; - char fw_version[36]; - uint32_t hw_id; /* hardware id */ - uint32_t hw_rev; /* hardware revision */ - uint32_t unk1; - uint8_t md5sum1[MD5SUM_LEN]; - uint32_t unk2; - uint8_t md5sum2[MD5SUM_LEN]; - uint32_t unk3; - uint32_t kernel_la; /* kernel load address */ - uint32_t kernel_ep; /* kernel entry point */ - uint32_t fw_length; /* total length of the firmware */ - uint32_t kernel_ofs; /* kernel data offset */ - uint32_t kernel_len; /* kernel data length */ - uint32_t rootfs_ofs; /* rootfs data offset */ - uint32_t rootfs_len; /* rootfs data length */ - uint32_t boot_ofs; /* bootloader data offset */ - uint32_t boot_len; /* bootloader data length */ - uint8_t pad[360]; -} __attribute__ ((packed)); - -static struct tplink_fw_header * -tplink_read_header(struct mtd_info *mtd, size_t offset) -{ - struct tplink_fw_header *header; - size_t header_len; - size_t retlen; - int ret; - u32 t; - - header = vmalloc(sizeof(*header)); - if (!header) - goto err; - - header_len = sizeof(struct tplink_fw_header); - ret = mtd_read(mtd, offset, header_len, &retlen, - (unsigned char *) header); - if (ret) - goto err_free_header; - - if (retlen != header_len) - goto err_free_header; - - /* sanity checks */ - t = be32_to_cpu(header->version); - if ((t != TPLINK_HEADER_V1) && (t != TPLINK_HEADER_V2)) - goto err_free_header; - - t = be32_to_cpu(header->kernel_ofs); - if (t != header_len) - goto err_free_header; - - return header; - -err_free_header: - vfree(header); -err: - return NULL; -} - -static int tplink_check_rootfs_magic(struct mtd_info *mtd, size_t offset) -{ - u32 magic; - size_t retlen; - int ret; - - ret = mtd_read(mtd, offset, sizeof(magic), &retlen, - (unsigned char *) &magic); - if (ret) - return ret; - - if (retlen != sizeof(magic)) - return -EIO; - - if (le32_to_cpu(magic) != SQUASHFS_MAGIC && - magic != 0x19852003) - return -EINVAL; - - return 0; -} - -static int tplink_parse_partitions_offset(struct mtd_info *master, -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) - struct mtd_partition **pparts, -#else - const struct mtd_partition **pparts, -#endif - struct mtd_part_parser_data *data, - size_t offset) -{ - struct mtd_partition *parts; - struct tplink_fw_header *header; - int nr_parts; - size_t art_offset; - size_t rootfs_offset; - size_t squashfs_offset; - int ret; - - nr_parts = TPLINK_NUM_PARTS; - parts = kzalloc(nr_parts * sizeof(struct mtd_partition), GFP_KERNEL); - if (!parts) { - ret = -ENOMEM; - goto err; - } - - header = tplink_read_header(master, offset); - if (!header) { - pr_notice("%s: no TP-Link header found\n", master->name); - ret = -ENODEV; - goto err_free_parts; - } - - squashfs_offset = offset + sizeof(struct tplink_fw_header) + - be32_to_cpu(header->kernel_len); - - ret = tplink_check_rootfs_magic(master, squashfs_offset); - if (ret == 0) - rootfs_offset = squashfs_offset; - else - rootfs_offset = offset + be32_to_cpu(header->rootfs_ofs); - - art_offset = master->size - TPLINK_ART_LEN; - - parts[0].name = "u-boot"; - parts[0].offset = 0; - parts[0].size = offset; - parts[0].mask_flags = MTD_WRITEABLE; - - parts[1].name = "kernel"; - parts[1].offset = offset; - parts[1].size = rootfs_offset - offset; - - parts[2].name = "rootfs"; - parts[2].offset = rootfs_offset; - parts[2].size = art_offset - rootfs_offset; - - parts[3].name = "art"; - parts[3].offset = art_offset; - parts[3].size = TPLINK_ART_LEN; - parts[3].mask_flags = MTD_WRITEABLE; - - parts[4].name = "firmware"; - parts[4].offset = offset; - parts[4].size = art_offset - offset; - - vfree(header); - - *pparts = parts; - return nr_parts; - -err_free_parts: - kfree(parts); -err: - *pparts = NULL; - return ret; -} - -static int tplink_parse_partitions(struct mtd_info *master, -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) - struct mtd_partition **pparts, -#else - const struct mtd_partition **pparts, -#endif - struct mtd_part_parser_data *data) -{ - return tplink_parse_partitions_offset(master, pparts, data, - TPLINK_KERNEL_OFFS); -} - -static int tplink_parse_64k_partitions(struct mtd_info *master, -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) - struct mtd_partition **pparts, -#else - const struct mtd_partition **pparts, -#endif - struct mtd_part_parser_data *data) -{ - return tplink_parse_partitions_offset(master, pparts, data, - TPLINK_64K_KERNEL_OFFS); -} - -static struct mtd_part_parser tplink_parser = { - .owner = THIS_MODULE, - .parse_fn = tplink_parse_partitions, - .name = "tp-link", -}; - -static struct mtd_part_parser tplink_64k_parser = { - .owner = THIS_MODULE, - .parse_fn = tplink_parse_64k_partitions, - .name = "tp-link-64k", -}; - -static int __init tplink_parser_init(void) -{ - register_mtd_parser(&tplink_parser); - register_mtd_parser(&tplink_64k_parser); - - return 0; -} - -module_init(tplink_parser_init); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); diff --git a/target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c b/target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c deleted file mode 100644 index 71ecd61c80..0000000000 --- a/target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c +++ /dev/null @@ -1,307 +0,0 @@ -/* - * net/dsa/mv88e6063.c - Driver for Marvell 88e6063 switch chips - * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org> - * - * This driver was base on: net/dsa/mv88e6060.c - * net/dsa/mv88e6063.c - Driver for Marvell 88e6060 switch chips - * Copyright (c) 2008-2009 Marvell Semiconductor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/version.h> -#include <linux/list.h> -#include <linux/netdevice.h> -#include <linux/phy.h> -#include <net/dsa.h> -#include <linux/version.h> - -#define REG_BASE 0x10 -#define REG_PHY(p) (REG_BASE + (p)) -#define REG_PORT(p) (REG_BASE + 8 + (p)) -#define REG_GLOBAL (REG_BASE + 0x0f) -#define NUM_PORTS 7 - -static int reg_read(struct dsa_switch *ds, int addr, int reg) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) - struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev); - return mdiobus_read(bus, addr, reg); -#else - struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->dev); - return mdiobus_read(bus, addr, reg); -#endif -} - -#define REG_READ(addr, reg) \ - ({ \ - int __ret; \ - \ - __ret = reg_read(ds, addr, reg); \ - if (__ret < 0) \ - return __ret; \ - __ret; \ - }) - - -static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) - struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev); - return mdiobus_write(bus, addr, reg, val); -#else - struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->dev); - return mdiobus_write(bus, addr, reg, val); -#endif -} - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,8,0) -static enum dsa_tag_protocol mv88e6063_get_tag_protocol(struct dsa_switch *ds) -{ - return DSA_TAG_PROTO_TRAILER; -} -#endif - -#define REG_WRITE(addr, reg, val) \ - ({ \ - int __ret; \ - \ - __ret = reg_write(ds, addr, reg, val); \ - if (__ret < 0) \ - return __ret; \ - }) - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) -static char *mv88e6063_drv_probe(struct device *host_dev, int sw_addr) -#else -static const char *mv88e6063_drv_probe(struct device *dsa_dev, - struct device *host_dev, int sw_addr, - void **_priv) -#endif -{ - struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev); - int ret; - - if (!bus) - return NULL; - - ret = mdiobus_read(bus, REG_PORT(0), 0x03); - if (ret >= 0) { - ret &= 0xfff0; - if (ret == 0x1530) - return "Marvell 88E6063"; - } - - return NULL; -} - -static int mv88e6063_switch_reset(struct dsa_switch *ds) -{ - int i; - int ret; - - /* - * Set all ports to the disabled state. - */ - for (i = 0; i < NUM_PORTS; i++) { - ret = REG_READ(REG_PORT(i), 0x04); - REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc); - } - - /* - * Wait for transmit queues to drain. - */ - msleep(2); - - /* - * Reset the switch. - */ - REG_WRITE(REG_GLOBAL, 0x0a, 0xa130); - - /* - * Wait up to one second for reset to complete. - */ - for (i = 0; i < 1000; i++) { - ret = REG_READ(REG_GLOBAL, 0x00); - if ((ret & 0x8000) == 0x0000) - break; - - msleep(1); - } - if (i == 1000) - return -ETIMEDOUT; - - return 0; -} - -static int mv88e6063_setup_global(struct dsa_switch *ds) -{ - /* - * Disable discarding of frames with excessive collisions, - * set the maximum frame size to 1536 bytes, and mask all - * interrupt sources. - */ - REG_WRITE(REG_GLOBAL, 0x04, 0x0800); - - /* - * Enable automatic address learning, set the address - * database size to 1024 entries, and set the default aging - * time to 5 minutes. - */ - REG_WRITE(REG_GLOBAL, 0x0a, 0x2130); - - return 0; -} - -static int mv88e6063_setup_port(struct dsa_switch *ds, int p) -{ - int addr = REG_PORT(p); - - /* - * Do not force flow control, disable Ingress and Egress - * Header tagging, disable VLAN tunneling, and set the port - * state to Forwarding. Additionally, if this is the CPU - * port, enable Ingress and Egress Trailer tagging mode. - */ - REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ? 0x4103 : 0x0003); - - /* - * Port based VLAN map: give each port its own address - * database, allow the CPU port to talk to each of the 'real' - * ports, and allow each of the 'real' ports to only talk to - * the CPU port. - */ - REG_WRITE(addr, 0x06, - ((p & 0xf) << 12) | - (dsa_is_cpu_port(ds, p) ? -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) - ds->phys_port_mask : -#else - ds->enabled_port_mask : -#endif -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0) - (1 << ds->dst->cpu_port))); -#else - (1 << ds->dst->cpu_dp->index))); -#endif - - /* - * Port Association Vector: when learning source addresses - * of packets, add the address to the address database using - * a port bitmap that has only the bit for this port set and - * the other bits clear. - */ - REG_WRITE(addr, 0x0b, 1 << p); - - return 0; -} - -static int mv88e6063_setup(struct dsa_switch *ds) -{ - int i; - int ret; - - ret = mv88e6063_switch_reset(ds); - if (ret < 0) - return ret; - - /* @@@ initialise atu */ - - ret = mv88e6063_setup_global(ds); - if (ret < 0) - return ret; - - for (i = 0; i < NUM_PORTS; i++) { - ret = mv88e6063_setup_port(ds, i); - if (ret < 0) - return ret; - } - - return 0; -} - -static int mv88e6063_set_addr(struct dsa_switch *ds, u8 *addr) -{ - REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]); - REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]); - REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]); - - return 0; -} - -static int mv88e6063_port_to_phy_addr(int port) -{ - if (port >= 0 && port <= NUM_PORTS) - return REG_PHY(port); - return -1; -} - -static int mv88e6063_phy_read(struct dsa_switch *ds, int port, int regnum) -{ - int addr; - - addr = mv88e6063_port_to_phy_addr(port); - if (addr == -1) - return 0xffff; - - return reg_read(ds, addr, regnum); -} - -static int -mv88e6063_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val) -{ - int addr; - - addr = mv88e6063_port_to_phy_addr(port); - if (addr == -1) - return 0xffff; - - return reg_write(ds, addr, regnum, val); -} - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,9,0) -static struct dsa_switch_driver mv88e6063_switch_ops = { -#else -static struct dsa_switch_ops mv88e6063_switch_ops = { -#endif -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,8,0) - .tag_protocol = htons(ETH_P_TRAILER), -#else - .get_tag_protocol = mv88e6063_get_tag_protocol, -#endif - .probe = mv88e6063_drv_probe, - .setup = mv88e6063_setup, - .set_addr = mv88e6063_set_addr, - .phy_read = mv88e6063_phy_read, - .phy_write = mv88e6063_phy_write, -}; - -#if LINUX_VERSION_CODE > KERNEL_VERSION(4,13,0) -static struct dsa_switch_driver mv88e6063_switch_drv = { - .ops = &mv88e6063_switch_ops, -}; -#endif - -static int __init mv88e6063_init(void) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0) - register_switch_driver(&mv88e6063_switch_ops); -#else - register_switch_driver(&mv88e6063_switch_drv); -#endif - return 0; -} -module_init(mv88e6063_init); - -static void __exit mv88e6063_cleanup(void) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0) - unregister_switch_driver(&mv88e6063_switch_ops); -#else - unregister_switch_driver(&mv88e6063_switch_drv); -#endif -} -module_exit(mv88e6063_cleanup); diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/Kconfig b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/Kconfig deleted file mode 100644 index 42d544f731..0000000000 --- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/Kconfig +++ /dev/null @@ -1,33 +0,0 @@ -config AG71XX - tristate "Atheros AR7XXX/AR9XXX built-in ethernet mac support" - depends on ATH79 - select PHYLIB - help - If you wish to compile a kernel for AR7XXX/91XXX and enable - ethernet support, then you should always answer Y to this. - -if AG71XX - -config AG71XX_DEBUG - bool "Atheros AR71xx built-in ethernet driver debugging" - default n - help - Atheros AR71xx built-in ethernet driver debugging messages. - -config AG71XX_DEBUG_FS - bool "Atheros AR71xx built-in ethernet driver debugfs support" - depends on DEBUG_FS - default n - help - Say Y, if you need access to various statistics provided by - the ag71xx driver. - -config AG71XX_AR8216_SUPPORT - bool "special support for the Atheros AR8216 switch" - default n - default y if ATH79_MACH_WNR2000 || ATH79_MACH_MZK_W04NU - help - Say 'y' here if you want to enable special support for the - Atheros AR8216 switch found on some boards. - -endif diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/Makefile b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/Makefile deleted file mode 100644 index b3ec4084c8..0000000000 --- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# -# Makefile for the Atheros AR71xx built-in ethernet macs -# - -ag71xx-y += ag71xx_main.o -ag71xx-y += ag71xx_ethtool.o -ag71xx-y += ag71xx_phy.o -ag71xx-y += ag71xx_mdio.o -ag71xx-y += ag71xx_ar7240.o - -ag71xx-$(CONFIG_AG71XX_DEBUG_FS) += ag71xx_debugfs.o -ag71xx-$(CONFIG_AG71XX_AR8216_SUPPORT) += ag71xx_ar8216.o - -obj-$(CONFIG_AG71XX) += ag71xx.o - diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx.h b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx.h deleted file mode 100644 index 2d9a865043..0000000000 --- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx.h +++ /dev/null @@ -1,508 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __AG71XX_H -#define __AG71XX_H - -#include <linux/kernel.h> -#include <linux/version.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/random.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/ethtool.h> -#include <linux/etherdevice.h> -#include <linux/if_vlan.h> -#include <linux/phy.h> -#include <linux/skbuff.h> -#include <linux/dma-mapping.h> -#include <linux/workqueue.h> - -#include <linux/bitops.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ag71xx_platform.h> - -#define AG71XX_DRV_NAME "ag71xx" -#define AG71XX_DRV_VERSION "0.5.35" - -/* - * For our NAPI weight bigger does *NOT* mean better - it means more - * D-cache misses and lots more wasted cycles than we'll ever - * possibly gain from saving instructions. - */ -#define AG71XX_NAPI_WEIGHT 32 -#define AG71XX_OOM_REFILL (1 + HZ/10) - -#define AG71XX_INT_ERR (AG71XX_INT_RX_BE | AG71XX_INT_TX_BE) -#define AG71XX_INT_TX (AG71XX_INT_TX_PS) -#define AG71XX_INT_RX (AG71XX_INT_RX_PR | AG71XX_INT_RX_OF) - -#define AG71XX_INT_POLL (AG71XX_INT_RX | AG71XX_INT_TX) -#define AG71XX_INT_INIT (AG71XX_INT_ERR | AG71XX_INT_POLL) - -#define AG71XX_TX_MTU_LEN 1540 - -#define AG71XX_TX_RING_SPLIT 512 -#define AG71XX_TX_RING_DS_PER_PKT DIV_ROUND_UP(AG71XX_TX_MTU_LEN, \ - AG71XX_TX_RING_SPLIT) -#define AG71XX_TX_RING_SIZE_DEFAULT 128 -#define AG71XX_RX_RING_SIZE_DEFAULT 256 - -#define AG71XX_TX_RING_SIZE_MAX 128 -#define AG71XX_RX_RING_SIZE_MAX 256 - -#define QCA955X_SGMII_LINK_WAR_MAX_TRY 10 - -#ifdef CONFIG_AG71XX_DEBUG -#define DBG(fmt, args...) pr_debug(fmt, ## args) -#else -#define DBG(fmt, args...) do {} while (0) -#endif - -#define ag71xx_assert(_cond) \ -do { \ - if (_cond) \ - break; \ - printk("%s,%d: assertion failed\n", __FILE__, __LINE__); \ - BUG(); \ -} while (0) - -struct ag71xx_desc { - u32 data; - u32 ctrl; -#define DESC_EMPTY BIT(31) -#define DESC_MORE BIT(24) -#define DESC_PKTLEN_M 0xfff - u32 next; - u32 pad; -} __attribute__((aligned(4))); - -#define AG71XX_DESC_SIZE roundup(sizeof(struct ag71xx_desc), \ - L1_CACHE_BYTES) - -struct ag71xx_buf { - union { - struct sk_buff *skb; - void *rx_buf; - }; - union { - dma_addr_t dma_addr; - unsigned int len; - }; -}; - -struct ag71xx_ring { - struct ag71xx_buf *buf; - u8 *descs_cpu; - dma_addr_t descs_dma; - u16 desc_split; - u16 order; - unsigned int curr; - unsigned int dirty; -}; - -struct ag71xx_mdio { - struct mii_bus *mii_bus; -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) - int mii_irq[PHY_MAX_ADDR]; -#endif - void __iomem *mdio_base; - struct ag71xx_mdio_platform_data *pdata; -}; - -struct ag71xx_int_stats { - unsigned long rx_pr; - unsigned long rx_be; - unsigned long rx_of; - unsigned long tx_ps; - unsigned long tx_be; - unsigned long tx_ur; - unsigned long total; -}; - -struct ag71xx_napi_stats { - unsigned long napi_calls; - unsigned long rx_count; - unsigned long rx_packets; - unsigned long rx_packets_max; - unsigned long tx_count; - unsigned long tx_packets; - unsigned long tx_packets_max; - - unsigned long rx[AG71XX_NAPI_WEIGHT + 1]; - unsigned long tx[AG71XX_NAPI_WEIGHT + 1]; -}; - -struct ag71xx_debug { - struct dentry *debugfs_dir; - - struct ag71xx_int_stats int_stats; - struct ag71xx_napi_stats napi_stats; -}; - -struct ag71xx { - /* - * Critical data related to the per-packet data path are clustered - * early in this structure to help improve the D-cache footprint. - */ - struct ag71xx_ring rx_ring ____cacheline_aligned; - struct ag71xx_ring tx_ring ____cacheline_aligned; - - unsigned int max_frame_len; - unsigned int desc_pktlen_mask; - unsigned int rx_buf_size; - - struct net_device *dev; - struct platform_device *pdev; - spinlock_t lock; - struct napi_struct napi; - u32 msg_enable; - - /* - * From this point onwards we're not looking at per-packet fields. - */ - void __iomem *mac_base; - - struct ag71xx_desc *stop_desc; - dma_addr_t stop_desc_dma; - - struct mii_bus *mii_bus; - struct phy_device *phy_dev; - void *phy_priv; - - unsigned int link; - unsigned int speed; - int duplex; - - struct delayed_work restart_work; - struct delayed_work link_work; - struct timer_list oom_timer; - -#ifdef CONFIG_AG71XX_DEBUG_FS - struct ag71xx_debug debug; -#endif -}; - -extern struct ethtool_ops ag71xx_ethtool_ops; -void ag71xx_link_adjust(struct ag71xx *ag); - -int ag71xx_mdio_driver_init(void) __init; -void ag71xx_mdio_driver_exit(void); - -int ag71xx_phy_connect(struct ag71xx *ag); -void ag71xx_phy_disconnect(struct ag71xx *ag); -void ag71xx_phy_start(struct ag71xx *ag); -void ag71xx_phy_stop(struct ag71xx *ag); - -static inline struct ag71xx_platform_data *ag71xx_get_pdata(struct ag71xx *ag) -{ - return ag->pdev->dev.platform_data; -} - -static inline int ag71xx_desc_empty(struct ag71xx_desc *desc) -{ - return (desc->ctrl & DESC_EMPTY) != 0; -} - -static inline struct ag71xx_desc * -ag71xx_ring_desc(struct ag71xx_ring *ring, int idx) -{ - return (struct ag71xx_desc *) &ring->descs_cpu[idx * AG71XX_DESC_SIZE]; -} - -static inline int -ag71xx_ring_size_order(int size) -{ - return fls(size - 1); -} - -/* Register offsets */ -#define AG71XX_REG_MAC_CFG1 0x0000 -#define AG71XX_REG_MAC_CFG2 0x0004 -#define AG71XX_REG_MAC_IPG 0x0008 -#define AG71XX_REG_MAC_HDX 0x000c -#define AG71XX_REG_MAC_MFL 0x0010 -#define AG71XX_REG_MII_CFG 0x0020 -#define AG71XX_REG_MII_CMD 0x0024 -#define AG71XX_REG_MII_ADDR 0x0028 -#define AG71XX_REG_MII_CTRL 0x002c -#define AG71XX_REG_MII_STATUS 0x0030 -#define AG71XX_REG_MII_IND 0x0034 -#define AG71XX_REG_MAC_IFCTL 0x0038 -#define AG71XX_REG_MAC_ADDR1 0x0040 -#define AG71XX_REG_MAC_ADDR2 0x0044 -#define AG71XX_REG_FIFO_CFG0 0x0048 -#define AG71XX_REG_FIFO_CFG1 0x004c -#define AG71XX_REG_FIFO_CFG2 0x0050 -#define AG71XX_REG_FIFO_CFG3 0x0054 -#define AG71XX_REG_FIFO_CFG4 0x0058 -#define AG71XX_REG_FIFO_CFG5 0x005c -#define AG71XX_REG_FIFO_RAM0 0x0060 -#define AG71XX_REG_FIFO_RAM1 0x0064 -#define AG71XX_REG_FIFO_RAM2 0x0068 -#define AG71XX_REG_FIFO_RAM3 0x006c -#define AG71XX_REG_FIFO_RAM4 0x0070 -#define AG71XX_REG_FIFO_RAM5 0x0074 -#define AG71XX_REG_FIFO_RAM6 0x0078 -#define AG71XX_REG_FIFO_RAM7 0x007c - -#define AG71XX_REG_TX_CTRL 0x0180 -#define AG71XX_REG_TX_DESC 0x0184 -#define AG71XX_REG_TX_STATUS 0x0188 -#define AG71XX_REG_RX_CTRL 0x018c -#define AG71XX_REG_RX_DESC 0x0190 -#define AG71XX_REG_RX_STATUS 0x0194 -#define AG71XX_REG_INT_ENABLE 0x0198 -#define AG71XX_REG_INT_STATUS 0x019c - -#define AG71XX_REG_FIFO_DEPTH 0x01a8 -#define AG71XX_REG_RX_SM 0x01b0 -#define AG71XX_REG_TX_SM 0x01b4 - -#define MAC_CFG1_TXE BIT(0) /* Tx Enable */ -#define MAC_CFG1_STX BIT(1) /* Synchronize Tx Enable */ -#define MAC_CFG1_RXE BIT(2) /* Rx Enable */ -#define MAC_CFG1_SRX BIT(3) /* Synchronize Rx Enable */ -#define MAC_CFG1_TFC BIT(4) /* Tx Flow Control Enable */ -#define MAC_CFG1_RFC BIT(5) /* Rx Flow Control Enable */ -#define MAC_CFG1_LB BIT(8) /* Loopback mode */ -#define MAC_CFG1_SR BIT(31) /* Soft Reset */ - -#define MAC_CFG2_FDX BIT(0) -#define MAC_CFG2_CRC_EN BIT(1) -#define MAC_CFG2_PAD_CRC_EN BIT(2) -#define MAC_CFG2_LEN_CHECK BIT(4) -#define MAC_CFG2_HUGE_FRAME_EN BIT(5) -#define MAC_CFG2_IF_1000 BIT(9) -#define MAC_CFG2_IF_10_100 BIT(8) - -#define FIFO_CFG0_WTM BIT(0) /* Watermark Module */ -#define FIFO_CFG0_RXS BIT(1) /* Rx System Module */ -#define FIFO_CFG0_RXF BIT(2) /* Rx Fabric Module */ -#define FIFO_CFG0_TXS BIT(3) /* Tx System Module */ -#define FIFO_CFG0_TXF BIT(4) /* Tx Fabric Module */ -#define FIFO_CFG0_ALL (FIFO_CFG0_WTM | FIFO_CFG0_RXS | FIFO_CFG0_RXF \ - | FIFO_CFG0_TXS | FIFO_CFG0_TXF) - -#define FIFO_CFG0_ENABLE_SHIFT 8 - -#define FIFO_CFG4_DE BIT(0) /* Drop Event */ -#define FIFO_CFG4_DV BIT(1) /* RX_DV Event */ -#define FIFO_CFG4_FC BIT(2) /* False Carrier */ -#define FIFO_CFG4_CE BIT(3) /* Code Error */ -#define FIFO_CFG4_CR BIT(4) /* CRC error */ -#define FIFO_CFG4_LM BIT(5) /* Length Mismatch */ -#define FIFO_CFG4_LO BIT(6) /* Length out of range */ -#define FIFO_CFG4_OK BIT(7) /* Packet is OK */ -#define FIFO_CFG4_MC BIT(8) /* Multicast Packet */ -#define FIFO_CFG4_BC BIT(9) /* Broadcast Packet */ -#define FIFO_CFG4_DR BIT(10) /* Dribble */ -#define FIFO_CFG4_LE BIT(11) /* Long Event */ -#define FIFO_CFG4_CF BIT(12) /* Control Frame */ -#define FIFO_CFG4_PF BIT(13) /* Pause Frame */ -#define FIFO_CFG4_UO BIT(14) /* Unsupported Opcode */ -#define FIFO_CFG4_VT BIT(15) /* VLAN tag detected */ -#define FIFO_CFG4_FT BIT(16) /* Frame Truncated */ -#define FIFO_CFG4_UC BIT(17) /* Unicast Packet */ - -#define FIFO_CFG5_DE BIT(0) /* Drop Event */ -#define FIFO_CFG5_DV BIT(1) /* RX_DV Event */ -#define FIFO_CFG5_FC BIT(2) /* False Carrier */ -#define FIFO_CFG5_CE BIT(3) /* Code Error */ -#define FIFO_CFG5_LM BIT(4) /* Length Mismatch */ -#define FIFO_CFG5_LO BIT(5) /* Length Out of Range */ -#define FIFO_CFG5_OK BIT(6) /* Packet is OK */ -#define FIFO_CFG5_MC BIT(7) /* Multicast Packet */ -#define FIFO_CFG5_BC BIT(8) /* Broadcast Packet */ -#define FIFO_CFG5_DR BIT(9) /* Dribble */ -#define FIFO_CFG5_CF BIT(10) /* Control Frame */ -#define FIFO_CFG5_PF BIT(11) /* Pause Frame */ -#define FIFO_CFG5_UO BIT(12) /* Unsupported Opcode */ -#define FIFO_CFG5_VT BIT(13) /* VLAN tag detected */ -#define FIFO_CFG5_LE BIT(14) /* Long Event */ -#define FIFO_CFG5_FT BIT(15) /* Frame Truncated */ -#define FIFO_CFG5_16 BIT(16) /* unknown */ -#define FIFO_CFG5_17 BIT(17) /* unknown */ -#define FIFO_CFG5_SF BIT(18) /* Short Frame */ -#define FIFO_CFG5_BM BIT(19) /* Byte Mode */ - -#define AG71XX_INT_TX_PS BIT(0) -#define AG71XX_INT_TX_UR BIT(1) -#define AG71XX_INT_TX_BE BIT(3) -#define AG71XX_INT_RX_PR BIT(4) -#define AG71XX_INT_RX_OF BIT(6) -#define AG71XX_INT_RX_BE BIT(7) - -#define MAC_IFCTL_SPEED BIT(16) - -#define MII_CFG_CLK_DIV_4 0 -#define MII_CFG_CLK_DIV_6 2 -#define MII_CFG_CLK_DIV_8 3 -#define MII_CFG_CLK_DIV_10 4 -#define MII_CFG_CLK_DIV_14 5 -#define MII_CFG_CLK_DIV_20 6 -#define MII_CFG_CLK_DIV_28 7 -#define MII_CFG_CLK_DIV_34 8 -#define MII_CFG_CLK_DIV_42 9 -#define MII_CFG_CLK_DIV_50 10 -#define MII_CFG_CLK_DIV_58 11 -#define MII_CFG_CLK_DIV_66 12 -#define MII_CFG_CLK_DIV_74 13 -#define MII_CFG_CLK_DIV_82 14 -#define MII_CFG_CLK_DIV_98 15 -#define MII_CFG_RESET BIT(31) - -#define MII_CMD_WRITE 0x0 -#define MII_CMD_READ 0x1 -#define MII_ADDR_SHIFT 8 -#define MII_IND_BUSY BIT(0) -#define MII_IND_INVALID BIT(2) - -#define TX_CTRL_TXE BIT(0) /* Tx Enable */ - -#define TX_STATUS_PS BIT(0) /* Packet Sent */ -#define TX_STATUS_UR BIT(1) /* Tx Underrun */ -#define TX_STATUS_BE BIT(3) /* Bus Error */ - -#define RX_CTRL_RXE BIT(0) /* Rx Enable */ - -#define RX_STATUS_PR BIT(0) /* Packet Received */ -#define RX_STATUS_OF BIT(2) /* Rx Overflow */ -#define RX_STATUS_BE BIT(3) /* Bus Error */ - -static inline void ag71xx_check_reg_offset(struct ag71xx *ag, unsigned reg) -{ - switch (reg) { - case AG71XX_REG_MAC_CFG1 ... AG71XX_REG_MAC_MFL: - case AG71XX_REG_MAC_IFCTL ... AG71XX_REG_TX_SM: - case AG71XX_REG_MII_CFG: - break; - - default: - BUG(); - } -} - -static inline void ag71xx_wr(struct ag71xx *ag, unsigned reg, u32 value) -{ - ag71xx_check_reg_offset(ag, reg); - - __raw_writel(value, ag->mac_base + reg); - /* flush write */ - (void) __raw_readl(ag->mac_base + reg); -} - -static inline u32 ag71xx_rr(struct ag71xx *ag, unsigned reg) -{ - ag71xx_check_reg_offset(ag, reg); - - return __raw_readl(ag->mac_base + reg); -} - -static inline void ag71xx_sb(struct ag71xx *ag, unsigned reg, u32 mask) -{ - void __iomem *r; - - ag71xx_check_reg_offset(ag, reg); - - r = ag->mac_base + reg; - __raw_writel(__raw_readl(r) | mask, r); - /* flush write */ - (void)__raw_readl(r); -} - -static inline void ag71xx_cb(struct ag71xx *ag, unsigned reg, u32 mask) -{ - void __iomem *r; - - ag71xx_check_reg_offset(ag, reg); - - r = ag->mac_base + reg; - __raw_writel(__raw_readl(r) & ~mask, r); - /* flush write */ - (void) __raw_readl(r); -} - -static inline void ag71xx_int_enable(struct ag71xx *ag, u32 ints) -{ - ag71xx_sb(ag, AG71XX_REG_INT_ENABLE, ints); -} - -static inline void ag71xx_int_disable(struct ag71xx *ag, u32 ints) -{ - ag71xx_cb(ag, AG71XX_REG_INT_ENABLE, ints); -} - -#ifdef CONFIG_AG71XX_AR8216_SUPPORT -void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb); -int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb, - int pktlen); -static inline int ag71xx_has_ar8216(struct ag71xx *ag) -{ - return ag71xx_get_pdata(ag)->has_ar8216; -} -#else -static inline void ag71xx_add_ar8216_header(struct ag71xx *ag, - struct sk_buff *skb) -{ -} - -static inline int ag71xx_remove_ar8216_header(struct ag71xx *ag, - struct sk_buff *skb, - int pktlen) -{ - return 0; -} -static inline int ag71xx_has_ar8216(struct ag71xx *ag) -{ - return 0; -} -#endif - -#ifdef CONFIG_AG71XX_DEBUG_FS -int ag71xx_debugfs_root_init(void); -void ag71xx_debugfs_root_exit(void); -int ag71xx_debugfs_init(struct ag71xx *ag); -void ag71xx_debugfs_exit(struct ag71xx *ag); -void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status); -void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx); -#else -static inline int ag71xx_debugfs_root_init(void) { return 0; } -static inline void ag71xx_debugfs_root_exit(void) {} -static inline int ag71xx_debugfs_init(struct ag71xx *ag) { return 0; } -static inline void ag71xx_debugfs_exit(struct ag71xx *ag) {} -static inline void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, - u32 status) {} -static inline void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, - int rx, int tx) {} -#endif /* CONFIG_AG71XX_DEBUG_FS */ - -void ag71xx_ar7240_start(struct ag71xx *ag); -void ag71xx_ar7240_stop(struct ag71xx *ag); -int ag71xx_ar7240_init(struct ag71xx *ag); -void ag71xx_ar7240_cleanup(struct ag71xx *ag); - -int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg); -void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val); - -u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr, - unsigned reg_addr); -int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr, - unsigned reg_addr, u16 reg_val); - -#endif /* _AG71XX_H */ diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c deleted file mode 100644 index 2859c0dbe1..0000000000 --- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c +++ /dev/null @@ -1,1386 +0,0 @@ -/* - * Driver for the built-in ethernet switch of the Atheros AR7240 SoC - * Copyright (c) 2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2010 Felix Fietkau <nbd@nbd.name> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#include <linux/etherdevice.h> -#include <linux/list.h> -#include <linux/netdevice.h> -#include <linux/phy.h> -#include <linux/mii.h> -#include <linux/bitops.h> -#include <linux/switch.h> -#include "ag71xx.h" - -#define BITM(_count) (BIT(_count) - 1) -#define BITS(_shift, _count) (BITM(_count) << _shift) - -#define AR7240_REG_MASK_CTRL 0x00 -#define AR7240_MASK_CTRL_REVISION_M BITM(8) -#define AR7240_MASK_CTRL_VERSION_M BITM(8) -#define AR7240_MASK_CTRL_VERSION_S 8 -#define AR7240_MASK_CTRL_VERSION_AR7240 0x01 -#define AR7240_MASK_CTRL_VERSION_AR934X 0x02 -#define AR7240_MASK_CTRL_SOFT_RESET BIT(31) - -#define AR7240_REG_MAC_ADDR0 0x20 -#define AR7240_REG_MAC_ADDR1 0x24 - -#define AR7240_REG_FLOOD_MASK 0x2c -#define AR7240_FLOOD_MASK_BROAD_TO_CPU BIT(26) - -#define AR7240_REG_GLOBAL_CTRL 0x30 -#define AR7240_GLOBAL_CTRL_MTU_M BITM(11) -#define AR9340_GLOBAL_CTRL_MTU_M BITM(14) - -#define AR7240_REG_VTU 0x0040 -#define AR7240_VTU_OP BITM(3) -#define AR7240_VTU_OP_NOOP 0x0 -#define AR7240_VTU_OP_FLUSH 0x1 -#define AR7240_VTU_OP_LOAD 0x2 -#define AR7240_VTU_OP_PURGE 0x3 -#define AR7240_VTU_OP_REMOVE_PORT 0x4 -#define AR7240_VTU_ACTIVE BIT(3) -#define AR7240_VTU_FULL BIT(4) -#define AR7240_VTU_PORT BITS(8, 4) -#define AR7240_VTU_PORT_S 8 -#define AR7240_VTU_VID BITS(16, 12) -#define AR7240_VTU_VID_S 16 -#define AR7240_VTU_PRIO BITS(28, 3) -#define AR7240_VTU_PRIO_S 28 -#define AR7240_VTU_PRIO_EN BIT(31) - -#define AR7240_REG_VTU_DATA 0x0044 -#define AR7240_VTUDATA_MEMBER BITS(0, 10) -#define AR7240_VTUDATA_VALID BIT(11) - -#define AR7240_REG_ATU 0x50 -#define AR7240_ATU_FLUSH_ALL 0x1 - -#define AR7240_REG_AT_CTRL 0x5c -#define AR7240_AT_CTRL_AGE_TIME BITS(0, 15) -#define AR7240_AT_CTRL_AGE_EN BIT(17) -#define AR7240_AT_CTRL_LEARN_CHANGE BIT(18) -#define AR7240_AT_CTRL_RESERVED BIT(19) -#define AR7240_AT_CTRL_ARP_EN BIT(20) - -#define AR7240_REG_TAG_PRIORITY 0x70 - -#define AR7240_REG_SERVICE_TAG 0x74 -#define AR7240_SERVICE_TAG_M BITM(16) - -#define AR7240_REG_CPU_PORT 0x78 -#define AR7240_MIRROR_PORT_S 4 -#define AR7240_MIRROR_PORT_M BITM(4) -#define AR7240_CPU_PORT_EN BIT(8) - -#define AR7240_REG_MIB_FUNCTION0 0x80 -#define AR7240_MIB_TIMER_M BITM(16) -#define AR7240_MIB_AT_HALF_EN BIT(16) -#define AR7240_MIB_BUSY BIT(17) -#define AR7240_MIB_FUNC_S 24 -#define AR7240_MIB_FUNC_M BITM(3) -#define AR7240_MIB_FUNC_NO_OP 0x0 -#define AR7240_MIB_FUNC_FLUSH 0x1 -#define AR7240_MIB_FUNC_CAPTURE 0x3 - -#define AR7240_REG_MDIO_CTRL 0x98 -#define AR7240_MDIO_CTRL_DATA_M BITM(16) -#define AR7240_MDIO_CTRL_REG_ADDR_S 16 -#define AR7240_MDIO_CTRL_PHY_ADDR_S 21 -#define AR7240_MDIO_CTRL_CMD_WRITE 0 -#define AR7240_MDIO_CTRL_CMD_READ BIT(27) -#define AR7240_MDIO_CTRL_MASTER_EN BIT(30) -#define AR7240_MDIO_CTRL_BUSY BIT(31) - -#define AR7240_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100) - -#define AR7240_REG_PORT_STATUS(_port) (AR7240_REG_PORT_BASE((_port)) + 0x00) -#define AR7240_PORT_STATUS_SPEED_S 0 -#define AR7240_PORT_STATUS_SPEED_M BITM(2) -#define AR7240_PORT_STATUS_SPEED_10 0 -#define AR7240_PORT_STATUS_SPEED_100 1 -#define AR7240_PORT_STATUS_SPEED_1000 2 -#define AR7240_PORT_STATUS_TXMAC BIT(2) -#define AR7240_PORT_STATUS_RXMAC BIT(3) -#define AR7240_PORT_STATUS_TXFLOW BIT(4) -#define AR7240_PORT_STATUS_RXFLOW BIT(5) -#define AR7240_PORT_STATUS_DUPLEX BIT(6) -#define AR7240_PORT_STATUS_LINK_UP BIT(8) -#define AR7240_PORT_STATUS_LINK_AUTO BIT(9) -#define AR7240_PORT_STATUS_LINK_PAUSE BIT(10) - -#define AR7240_REG_PORT_CTRL(_port) (AR7240_REG_PORT_BASE((_port)) + 0x04) -#define AR7240_PORT_CTRL_STATE_M BITM(3) -#define AR7240_PORT_CTRL_STATE_DISABLED 0 -#define AR7240_PORT_CTRL_STATE_BLOCK 1 -#define AR7240_PORT_CTRL_STATE_LISTEN 2 -#define AR7240_PORT_CTRL_STATE_LEARN 3 -#define AR7240_PORT_CTRL_STATE_FORWARD 4 -#define AR7240_PORT_CTRL_LEARN_LOCK BIT(7) -#define AR7240_PORT_CTRL_VLAN_MODE_S 8 -#define AR7240_PORT_CTRL_VLAN_MODE_KEEP 0 -#define AR7240_PORT_CTRL_VLAN_MODE_STRIP 1 -#define AR7240_PORT_CTRL_VLAN_MODE_ADD 2 -#define AR7240_PORT_CTRL_VLAN_MODE_DOUBLE_TAG 3 -#define AR7240_PORT_CTRL_IGMP_SNOOP BIT(10) -#define AR7240_PORT_CTRL_HEADER BIT(11) -#define AR7240_PORT_CTRL_MAC_LOOP BIT(12) -#define AR7240_PORT_CTRL_SINGLE_VLAN BIT(13) -#define AR7240_PORT_CTRL_LEARN BIT(14) -#define AR7240_PORT_CTRL_DOUBLE_TAG BIT(15) -#define AR7240_PORT_CTRL_MIRROR_TX BIT(16) -#define AR7240_PORT_CTRL_MIRROR_RX BIT(17) - -#define AR7240_REG_PORT_VLAN(_port) (AR7240_REG_PORT_BASE((_port)) + 0x08) - -#define AR7240_PORT_VLAN_DEFAULT_ID_S 0 -#define AR7240_PORT_VLAN_DEST_PORTS_S 16 -#define AR7240_PORT_VLAN_MODE_S 30 -#define AR7240_PORT_VLAN_MODE_PORT_ONLY 0 -#define AR7240_PORT_VLAN_MODE_PORT_FALLBACK 1 -#define AR7240_PORT_VLAN_MODE_VLAN_ONLY 2 -#define AR7240_PORT_VLAN_MODE_SECURE 3 - - -#define AR7240_REG_STATS_BASE(_port) (0x20000 + (_port) * 0x100) - -#define AR7240_STATS_RXBROAD 0x00 -#define AR7240_STATS_RXPAUSE 0x04 -#define AR7240_STATS_RXMULTI 0x08 -#define AR7240_STATS_RXFCSERR 0x0c -#define AR7240_STATS_RXALIGNERR 0x10 -#define AR7240_STATS_RXRUNT 0x14 -#define AR7240_STATS_RXFRAGMENT 0x18 -#define AR7240_STATS_RX64BYTE 0x1c -#define AR7240_STATS_RX128BYTE 0x20 -#define AR7240_STATS_RX256BYTE 0x24 -#define AR7240_STATS_RX512BYTE 0x28 -#define AR7240_STATS_RX1024BYTE 0x2c -#define AR7240_STATS_RX1518BYTE 0x30 -#define AR7240_STATS_RXMAXBYTE 0x34 -#define AR7240_STATS_RXTOOLONG 0x38 -#define AR7240_STATS_RXGOODBYTE 0x3c -#define AR7240_STATS_RXBADBYTE 0x44 -#define AR7240_STATS_RXOVERFLOW 0x4c -#define AR7240_STATS_FILTERED 0x50 -#define AR7240_STATS_TXBROAD 0x54 -#define AR7240_STATS_TXPAUSE 0x58 -#define AR7240_STATS_TXMULTI 0x5c -#define AR7240_STATS_TXUNDERRUN 0x60 -#define AR7240_STATS_TX64BYTE 0x64 -#define AR7240_STATS_TX128BYTE 0x68 -#define AR7240_STATS_TX256BYTE 0x6c -#define AR7240_STATS_TX512BYTE 0x70 -#define AR7240_STATS_TX1024BYTE 0x74 -#define AR7240_STATS_TX1518BYTE 0x78 -#define AR7240_STATS_TXMAXBYTE 0x7c -#define AR7240_STATS_TXOVERSIZE 0x80 -#define AR7240_STATS_TXBYTE 0x84 -#define AR7240_STATS_TXCOLLISION 0x8c -#define AR7240_STATS_TXABORTCOL 0x90 -#define AR7240_STATS_TXMULTICOL 0x94 -#define AR7240_STATS_TXSINGLECOL 0x98 -#define AR7240_STATS_TXEXCDEFER 0x9c -#define AR7240_STATS_TXDEFER 0xa0 -#define AR7240_STATS_TXLATECOL 0xa4 - -#define AR7240_PORT_CPU 0 -#define AR7240_NUM_PORTS 6 -#define AR7240_NUM_PHYS 5 - -#define AR7240_PHY_ID1 0x004d -#define AR7240_PHY_ID2 0xd041 - -#define AR934X_PHY_ID1 0x004d -#define AR934X_PHY_ID2 0xd042 - -#define AR7240_MAX_VLANS 16 - -#define AR934X_REG_OPER_MODE0 0x04 -#define AR934X_OPER_MODE0_MAC_GMII_EN BIT(6) -#define AR934X_OPER_MODE0_PHY_MII_EN BIT(10) - -#define AR934X_REG_OPER_MODE1 0x08 -#define AR934X_REG_OPER_MODE1_PHY4_MII_EN BIT(28) - -#define AR934X_REG_FLOOD_MASK 0x2c -#define AR934X_FLOOD_MASK_MC_DP(_p) BIT(16 + (_p)) -#define AR934X_FLOOD_MASK_BC_DP(_p) BIT(25 + (_p)) - -#define AR934X_REG_QM_CTRL 0x3c -#define AR934X_QM_CTRL_ARP_EN BIT(15) - -#define AR934X_REG_AT_CTRL 0x5c -#define AR934X_AT_CTRL_AGE_TIME BITS(0, 15) -#define AR934X_AT_CTRL_AGE_EN BIT(17) -#define AR934X_AT_CTRL_LEARN_CHANGE BIT(18) - -#define AR934X_MIB_ENABLE BIT(30) - -#define AR934X_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100) - -#define AR934X_REG_PORT_VLAN1(_port) (AR934X_REG_PORT_BASE((_port)) + 0x08) -#define AR934X_PORT_VLAN1_DEFAULT_SVID_S 0 -#define AR934X_PORT_VLAN1_FORCE_DEFAULT_VID_EN BIT(12) -#define AR934X_PORT_VLAN1_PORT_TLS_MODE BIT(13) -#define AR934X_PORT_VLAN1_PORT_VLAN_PROP_EN BIT(14) -#define AR934X_PORT_VLAN1_PORT_CLONE_EN BIT(15) -#define AR934X_PORT_VLAN1_DEFAULT_CVID_S 16 -#define AR934X_PORT_VLAN1_FORCE_PORT_VLAN_EN BIT(28) -#define AR934X_PORT_VLAN1_ING_PORT_PRI_S 29 - -#define AR934X_REG_PORT_VLAN2(_port) (AR934X_REG_PORT_BASE((_port)) + 0x0c) -#define AR934X_PORT_VLAN2_PORT_VID_MEM_S 16 -#define AR934X_PORT_VLAN2_8021Q_MODE_S 30 -#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_ONLY 0 -#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_FALLBACK 1 -#define AR934X_PORT_VLAN2_8021Q_MODE_VLAN_ONLY 2 -#define AR934X_PORT_VLAN2_8021Q_MODE_SECURE 3 - -#define sw_to_ar7240(_dev) container_of(_dev, struct ar7240sw, swdev) - -struct ar7240sw_port_stat { - unsigned long rx_broadcast; - unsigned long rx_pause; - unsigned long rx_multicast; - unsigned long rx_fcs_error; - unsigned long rx_align_error; - unsigned long rx_runt; - unsigned long rx_fragments; - unsigned long rx_64byte; - unsigned long rx_128byte; - unsigned long rx_256byte; - unsigned long rx_512byte; - unsigned long rx_1024byte; - unsigned long rx_1518byte; - unsigned long rx_maxbyte; - unsigned long rx_toolong; - unsigned long rx_good_byte; - unsigned long rx_bad_byte; - unsigned long rx_overflow; - unsigned long filtered; - - unsigned long tx_broadcast; - unsigned long tx_pause; - unsigned long tx_multicast; - unsigned long tx_underrun; - unsigned long tx_64byte; - unsigned long tx_128byte; - unsigned long tx_256byte; - unsigned long tx_512byte; - unsigned long tx_1024byte; - unsigned long tx_1518byte; - unsigned long tx_maxbyte; - unsigned long tx_oversize; - unsigned long tx_byte; - unsigned long tx_collision; - unsigned long tx_abortcol; - unsigned long tx_multicol; - unsigned long tx_singlecol; - unsigned long tx_excdefer; - unsigned long tx_defer; - unsigned long tx_xlatecol; -}; - -struct ar7240sw { - struct mii_bus *mii_bus; - struct ag71xx_switch_platform_data *swdata; - struct switch_dev swdev; - int num_ports; - u8 ver; - bool vlan; - u16 vlan_id[AR7240_MAX_VLANS]; - u8 vlan_table[AR7240_MAX_VLANS]; - u8 vlan_tagged; - u16 pvid[AR7240_NUM_PORTS]; - char buf[80]; - - rwlock_t stats_lock; - struct ar7240sw_port_stat port_stats[AR7240_NUM_PORTS]; -}; - -struct ar7240sw_hw_stat { - char string[ETH_GSTRING_LEN]; - int sizeof_stat; - int reg; -}; - -static DEFINE_MUTEX(reg_mutex); - -static inline int sw_is_ar7240(struct ar7240sw *as) -{ - return as->ver == AR7240_MASK_CTRL_VERSION_AR7240; -} - -static inline int sw_is_ar934x(struct ar7240sw *as) -{ - return as->ver == AR7240_MASK_CTRL_VERSION_AR934X; -} - -static inline u32 ar7240sw_port_mask(struct ar7240sw *as, int port) -{ - return BIT(port); -} - -static inline u32 ar7240sw_port_mask_all(struct ar7240sw *as) -{ - return BIT(as->swdev.ports) - 1; -} - -static inline u32 ar7240sw_port_mask_but(struct ar7240sw *as, int port) -{ - return ar7240sw_port_mask_all(as) & ~BIT(port); -} - -static inline u16 mk_phy_addr(u32 reg) -{ - return 0x17 & ((reg >> 4) | 0x10); -} - -static inline u16 mk_phy_reg(u32 reg) -{ - return (reg << 1) & 0x1e; -} - -static inline u16 mk_high_addr(u32 reg) -{ - return (reg >> 7) & 0x1ff; -} - -static u32 __ar7240sw_reg_read(struct mii_bus *mii, u32 reg) -{ - unsigned long flags; - u16 phy_addr; - u16 phy_reg; - u32 hi, lo; - - reg = (reg & 0xfffffffc) >> 2; - phy_addr = mk_phy_addr(reg); - phy_reg = mk_phy_reg(reg); - - local_irq_save(flags); - ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg)); - lo = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg); - hi = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg + 1); - local_irq_restore(flags); - - return (hi << 16) | lo; -} - -static void __ar7240sw_reg_write(struct mii_bus *mii, u32 reg, u32 val) -{ - unsigned long flags; - u16 phy_addr; - u16 phy_reg; - - reg = (reg & 0xfffffffc) >> 2; - phy_addr = mk_phy_addr(reg); - phy_reg = mk_phy_reg(reg); - - local_irq_save(flags); - ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg)); - ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg + 1, (val >> 16)); - ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg, (val & 0xffff)); - local_irq_restore(flags); -} - -static u32 ar7240sw_reg_read(struct mii_bus *mii, u32 reg_addr) -{ - u32 ret; - - mutex_lock(®_mutex); - ret = __ar7240sw_reg_read(mii, reg_addr); - mutex_unlock(®_mutex); - - return ret; -} - -static void ar7240sw_reg_write(struct mii_bus *mii, u32 reg_addr, u32 reg_val) -{ - mutex_lock(®_mutex); - __ar7240sw_reg_write(mii, reg_addr, reg_val); - mutex_unlock(®_mutex); -} - -static u32 ar7240sw_reg_rmw(struct mii_bus *mii, u32 reg, u32 mask, u32 val) -{ - u32 t; - - mutex_lock(®_mutex); - t = __ar7240sw_reg_read(mii, reg); - t &= ~mask; - t |= val; - __ar7240sw_reg_write(mii, reg, t); - mutex_unlock(®_mutex); - - return t; -} - -static void ar7240sw_reg_set(struct mii_bus *mii, u32 reg, u32 val) -{ - u32 t; - - mutex_lock(®_mutex); - t = __ar7240sw_reg_read(mii, reg); - t |= val; - __ar7240sw_reg_write(mii, reg, t); - mutex_unlock(®_mutex); -} - -static int __ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val, - unsigned timeout) -{ - int i; - - for (i = 0; i < timeout; i++) { - u32 t; - - t = __ar7240sw_reg_read(mii, reg); - if ((t & mask) == val) - return 0; - - usleep_range(1000, 2000); - } - - return -ETIMEDOUT; -} - -static int ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val, - unsigned timeout) -{ - int ret; - - mutex_lock(®_mutex); - ret = __ar7240sw_reg_wait(mii, reg, mask, val, timeout); - mutex_unlock(®_mutex); - return ret; -} - -u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr, - unsigned reg_addr) -{ - u32 t, val = 0xffff; - int err; - - if (phy_addr >= AR7240_NUM_PHYS) - return 0xffff; - - mutex_lock(®_mutex); - t = (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) | - (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) | - AR7240_MDIO_CTRL_MASTER_EN | - AR7240_MDIO_CTRL_BUSY | - AR7240_MDIO_CTRL_CMD_READ; - - __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t); - err = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL, - AR7240_MDIO_CTRL_BUSY, 0, 5); - if (!err) - val = __ar7240sw_reg_read(mii, AR7240_REG_MDIO_CTRL); - mutex_unlock(®_mutex); - - return val & AR7240_MDIO_CTRL_DATA_M; -} - -int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr, - unsigned reg_addr, u16 reg_val) -{ - u32 t; - int ret; - - if (phy_addr >= AR7240_NUM_PHYS) - return -EINVAL; - - mutex_lock(®_mutex); - t = (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) | - (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) | - AR7240_MDIO_CTRL_MASTER_EN | - AR7240_MDIO_CTRL_BUSY | - AR7240_MDIO_CTRL_CMD_WRITE | - reg_val; - - __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t); - ret = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL, - AR7240_MDIO_CTRL_BUSY, 0, 5); - mutex_unlock(®_mutex); - - return ret; -} - -static int ar7240sw_capture_stats(struct ar7240sw *as) -{ - struct mii_bus *mii = as->mii_bus; - int port; - int ret; - - write_lock(&as->stats_lock); - - /* Capture the hardware statistics for all ports */ - ar7240sw_reg_rmw(mii, AR7240_REG_MIB_FUNCTION0, - (AR7240_MIB_FUNC_M << AR7240_MIB_FUNC_S), - (AR7240_MIB_FUNC_CAPTURE << AR7240_MIB_FUNC_S)); - - /* Wait for the capturing to complete. */ - ret = ar7240sw_reg_wait(mii, AR7240_REG_MIB_FUNCTION0, - AR7240_MIB_BUSY, 0, 10); - - if (ret) - goto unlock; - - for (port = 0; port < AR7240_NUM_PORTS; port++) { - unsigned int base; - struct ar7240sw_port_stat *stats; - - base = AR7240_REG_STATS_BASE(port); - stats = &as->port_stats[port]; - -#define READ_STAT(_r) ar7240sw_reg_read(mii, base + AR7240_STATS_ ## _r) - - stats->rx_good_byte += READ_STAT(RXGOODBYTE); - stats->tx_byte += READ_STAT(TXBYTE); - -#undef READ_STAT - } - - ret = 0; - -unlock: - write_unlock(&as->stats_lock); - return ret; -} - -static void ar7240sw_disable_port(struct ar7240sw *as, unsigned port) -{ - ar7240sw_reg_write(as->mii_bus, AR7240_REG_PORT_CTRL(port), - AR7240_PORT_CTRL_STATE_DISABLED); -} - -static void ar7240sw_setup(struct ar7240sw *as) -{ - struct mii_bus *mii = as->mii_bus; - - /* Enable CPU port, and disable mirror port */ - ar7240sw_reg_write(mii, AR7240_REG_CPU_PORT, - AR7240_CPU_PORT_EN | - (15 << AR7240_MIRROR_PORT_S)); - - /* Setup TAG priority mapping */ - ar7240sw_reg_write(mii, AR7240_REG_TAG_PRIORITY, 0xfa50); - - if (sw_is_ar934x(as)) { - /* Enable aging, MAC replacing */ - ar7240sw_reg_write(mii, AR934X_REG_AT_CTRL, - 0x2b /* 5 min age time */ | - AR934X_AT_CTRL_AGE_EN | - AR934X_AT_CTRL_LEARN_CHANGE); - /* Enable ARP frame acknowledge */ - ar7240sw_reg_set(mii, AR934X_REG_QM_CTRL, - AR934X_QM_CTRL_ARP_EN); - /* Enable Broadcast/Multicast frames transmitted to the CPU */ - ar7240sw_reg_set(mii, AR934X_REG_FLOOD_MASK, - AR934X_FLOOD_MASK_BC_DP(0) | - AR934X_FLOOD_MASK_MC_DP(0)); - - /* setup MTU */ - ar7240sw_reg_rmw(mii, AR7240_REG_GLOBAL_CTRL, - AR9340_GLOBAL_CTRL_MTU_M, - AR9340_GLOBAL_CTRL_MTU_M); - - /* Enable MIB counters */ - ar7240sw_reg_set(mii, AR7240_REG_MIB_FUNCTION0, - AR934X_MIB_ENABLE); - - } else { - /* Enable ARP frame acknowledge, aging, MAC replacing */ - ar7240sw_reg_write(mii, AR7240_REG_AT_CTRL, - AR7240_AT_CTRL_RESERVED | - 0x2b /* 5 min age time */ | - AR7240_AT_CTRL_AGE_EN | - AR7240_AT_CTRL_ARP_EN | - AR7240_AT_CTRL_LEARN_CHANGE); - /* Enable Broadcast frames transmitted to the CPU */ - ar7240sw_reg_set(mii, AR7240_REG_FLOOD_MASK, - AR7240_FLOOD_MASK_BROAD_TO_CPU); - - /* setup MTU */ - ar7240sw_reg_rmw(mii, AR7240_REG_GLOBAL_CTRL, - AR7240_GLOBAL_CTRL_MTU_M, - AR7240_GLOBAL_CTRL_MTU_M); - } - - /* setup Service TAG */ - ar7240sw_reg_rmw(mii, AR7240_REG_SERVICE_TAG, AR7240_SERVICE_TAG_M, 0); -} - -/* inspired by phy_poll_reset in drivers/net/phy/phy_device.c */ -static int -ar7240sw_phy_poll_reset(struct mii_bus *bus) -{ - const unsigned int sleep_msecs = 20; - int ret, elapsed, i; - - for (elapsed = sleep_msecs; elapsed <= 600; - elapsed += sleep_msecs) { - msleep(sleep_msecs); - for (i = 0; i < AR7240_NUM_PHYS; i++) { - ret = ar7240sw_phy_read(bus, i, MII_BMCR); - if (ret < 0) - return ret; - if (ret & BMCR_RESET) - break; - if (i == AR7240_NUM_PHYS - 1) { - usleep_range(1000, 2000); - return 0; - } - } - } - return -ETIMEDOUT; -} - -static int ar7240sw_reset(struct ar7240sw *as) -{ - struct mii_bus *mii = as->mii_bus; - int ret; - int i; - - /* Set all ports to disabled state. */ - for (i = 0; i < AR7240_NUM_PORTS; i++) - ar7240sw_disable_port(as, i); - - /* Wait for transmit queues to drain. */ - usleep_range(2000, 3000); - - /* Reset the switch. */ - ar7240sw_reg_write(mii, AR7240_REG_MASK_CTRL, - AR7240_MASK_CTRL_SOFT_RESET); - - ret = ar7240sw_reg_wait(mii, AR7240_REG_MASK_CTRL, - AR7240_MASK_CTRL_SOFT_RESET, 0, 1000); - - /* setup PHYs */ - for (i = 0; i < AR7240_NUM_PHYS; i++) { - ar7240sw_phy_write(mii, i, MII_ADVERTISE, - ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | - ADVERTISE_PAUSE_ASYM); - ar7240sw_phy_write(mii, i, MII_BMCR, - BMCR_RESET | BMCR_ANENABLE); - } - ret = ar7240sw_phy_poll_reset(mii); - if (ret) - return ret; - - ar7240sw_setup(as); - return ret; -} - -static void ar7240sw_setup_port(struct ar7240sw *as, unsigned port, u8 portmask) -{ - struct mii_bus *mii = as->mii_bus; - u32 ctrl; - u32 vid, mode; - - ctrl = AR7240_PORT_CTRL_STATE_FORWARD | AR7240_PORT_CTRL_LEARN | - AR7240_PORT_CTRL_SINGLE_VLAN; - - if (port == AR7240_PORT_CPU) { - ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port), - AR7240_PORT_STATUS_SPEED_1000 | - AR7240_PORT_STATUS_TXFLOW | - AR7240_PORT_STATUS_RXFLOW | - AR7240_PORT_STATUS_TXMAC | - AR7240_PORT_STATUS_RXMAC | - AR7240_PORT_STATUS_DUPLEX); - } else { - ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port), - AR7240_PORT_STATUS_LINK_AUTO); - } - - /* Set the default VID for this port */ - if (as->vlan) { - vid = as->vlan_id[as->pvid[port]]; - mode = AR7240_PORT_VLAN_MODE_SECURE; - } else { - vid = port; - mode = AR7240_PORT_VLAN_MODE_PORT_ONLY; - } - - if (as->vlan) { - if (as->vlan_tagged & BIT(port)) - ctrl |= AR7240_PORT_CTRL_VLAN_MODE_ADD << - AR7240_PORT_CTRL_VLAN_MODE_S; - else - ctrl |= AR7240_PORT_CTRL_VLAN_MODE_STRIP << - AR7240_PORT_CTRL_VLAN_MODE_S; - } else { - ctrl |= AR7240_PORT_CTRL_VLAN_MODE_KEEP << - AR7240_PORT_CTRL_VLAN_MODE_S; - } - - if (!portmask) { - if (port == AR7240_PORT_CPU) - portmask = ar7240sw_port_mask_but(as, AR7240_PORT_CPU); - else - portmask = ar7240sw_port_mask(as, AR7240_PORT_CPU); - } - - /* preserve mirror rx&tx flags */ - ctrl |= ar7240sw_reg_read(mii, AR7240_REG_PORT_CTRL(port)) & - (AR7240_PORT_CTRL_MIRROR_RX | AR7240_PORT_CTRL_MIRROR_TX); - - /* allow the port to talk to all other ports, but exclude its - * own ID to prevent frames from being reflected back to the - * port that they came from */ - portmask &= ar7240sw_port_mask_but(as, port); - - ar7240sw_reg_write(mii, AR7240_REG_PORT_CTRL(port), ctrl); - if (sw_is_ar934x(as)) { - u32 vlan1, vlan2; - - vlan1 = (vid << AR934X_PORT_VLAN1_DEFAULT_CVID_S); - vlan2 = (portmask << AR934X_PORT_VLAN2_PORT_VID_MEM_S) | - (mode << AR934X_PORT_VLAN2_8021Q_MODE_S); - ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN1(port), vlan1); - ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN2(port), vlan2); - } else { - u32 vlan; - - vlan = vid | (mode << AR7240_PORT_VLAN_MODE_S) | - (portmask << AR7240_PORT_VLAN_DEST_PORTS_S); - - ar7240sw_reg_write(mii, AR7240_REG_PORT_VLAN(port), vlan); - } -} - -static int ar7240_set_addr(struct ar7240sw *as, u8 *addr) -{ - struct mii_bus *mii = as->mii_bus; - u32 t; - - t = (addr[4] << 8) | addr[5]; - ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR0, t); - - t = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3]; - ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR1, t); - - return 0; -} - -static int -ar7240_set_vid(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - as->vlan_id[val->port_vlan] = val->value.i; - return 0; -} - -static int -ar7240_get_vid(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - val->value.i = as->vlan_id[val->port_vlan]; - return 0; -} - -static int -ar7240_set_pvid(struct switch_dev *dev, int port, int vlan) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - - /* make sure no invalid PVIDs get set */ - - if (vlan >= dev->vlans) - return -EINVAL; - - as->pvid[port] = vlan; - return 0; -} - -static int -ar7240_get_pvid(struct switch_dev *dev, int port, int *vlan) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - *vlan = as->pvid[port]; - return 0; -} - -static int -ar7240_get_ports(struct switch_dev *dev, struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - u8 ports = as->vlan_table[val->port_vlan]; - int i; - - val->len = 0; - for (i = 0; i < as->swdev.ports; i++) { - struct switch_port *p; - - if (!(ports & (1 << i))) - continue; - - p = &val->value.ports[val->len++]; - p->id = i; - if (as->vlan_tagged & (1 << i)) - p->flags = (1 << SWITCH_PORT_FLAG_TAGGED); - else - p->flags = 0; - } - return 0; -} - -static int -ar7240_set_ports(struct switch_dev *dev, struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - u8 *vt = &as->vlan_table[val->port_vlan]; - int i, j; - - *vt = 0; - for (i = 0; i < val->len; i++) { - struct switch_port *p = &val->value.ports[i]; - - if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) - as->vlan_tagged |= (1 << p->id); - else { - as->vlan_tagged &= ~(1 << p->id); - as->pvid[p->id] = val->port_vlan; - - /* make sure that an untagged port does not - * appear in other vlans */ - for (j = 0; j < AR7240_MAX_VLANS; j++) { - if (j == val->port_vlan) - continue; - as->vlan_table[j] &= ~(1 << p->id); - } - } - - *vt |= 1 << p->id; - } - return 0; -} - -static int -ar7240_set_vlan(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - as->vlan = !!val->value.i; - return 0; -} - -static int -ar7240_get_vlan(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - val->value.i = as->vlan; - return 0; -} - -static void -ar7240_vtu_op(struct ar7240sw *as, u32 op, u32 val) -{ - struct mii_bus *mii = as->mii_bus; - - if (ar7240sw_reg_wait(mii, AR7240_REG_VTU, AR7240_VTU_ACTIVE, 0, 5)) - return; - - if ((op & AR7240_VTU_OP) == AR7240_VTU_OP_LOAD) { - val &= AR7240_VTUDATA_MEMBER; - val |= AR7240_VTUDATA_VALID; - ar7240sw_reg_write(mii, AR7240_REG_VTU_DATA, val); - } - op |= AR7240_VTU_ACTIVE; - ar7240sw_reg_write(mii, AR7240_REG_VTU, op); -} - -static int -ar7240_hw_apply(struct switch_dev *dev) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - u8 portmask[AR7240_NUM_PORTS]; - int i, j; - - /* flush all vlan translation unit entries */ - ar7240_vtu_op(as, AR7240_VTU_OP_FLUSH, 0); - - memset(portmask, 0, sizeof(portmask)); - if (as->vlan) { - /* calculate the port destination masks and load vlans - * into the vlan translation unit */ - for (j = 0; j < AR7240_MAX_VLANS; j++) { - u8 vp = as->vlan_table[j]; - - if (!vp) - continue; - - for (i = 0; i < as->swdev.ports; i++) { - u8 mask = (1 << i); - if (vp & mask) - portmask[i] |= vp & ~mask; - } - - ar7240_vtu_op(as, - AR7240_VTU_OP_LOAD | - (as->vlan_id[j] << AR7240_VTU_VID_S), - as->vlan_table[j]); - } - } else { - /* vlan disabled: - * isolate all ports, but connect them to the cpu port */ - for (i = 0; i < as->swdev.ports; i++) { - if (i == AR7240_PORT_CPU) - continue; - - portmask[i] = 1 << AR7240_PORT_CPU; - portmask[AR7240_PORT_CPU] |= (1 << i); - } - } - - /* update the port destination mask registers and tag settings */ - for (i = 0; i < as->swdev.ports; i++) - ar7240sw_setup_port(as, i, portmask[i]); - - return 0; -} - -static int -ar7240_reset_switch(struct switch_dev *dev) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - ar7240sw_reset(as); - return 0; -} - -static int -ar7240_get_port_link(struct switch_dev *dev, int port, - struct switch_port_link *link) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - struct mii_bus *mii = as->mii_bus; - u32 status; - - if (port >= AR7240_NUM_PORTS) - return -EINVAL; - - status = ar7240sw_reg_read(mii, AR7240_REG_PORT_STATUS(port)); - link->aneg = !!(status & AR7240_PORT_STATUS_LINK_AUTO); - if (link->aneg) { - link->link = !!(status & AR7240_PORT_STATUS_LINK_UP); - if (!link->link) - return 0; - } else { - link->link = true; - } - - link->duplex = !!(status & AR7240_PORT_STATUS_DUPLEX); - link->tx_flow = !!(status & AR7240_PORT_STATUS_TXFLOW); - link->rx_flow = !!(status & AR7240_PORT_STATUS_RXFLOW); - switch (status & AR7240_PORT_STATUS_SPEED_M) { - case AR7240_PORT_STATUS_SPEED_10: - link->speed = SWITCH_PORT_SPEED_10; - break; - case AR7240_PORT_STATUS_SPEED_100: - link->speed = SWITCH_PORT_SPEED_100; - break; - case AR7240_PORT_STATUS_SPEED_1000: - link->speed = SWITCH_PORT_SPEED_1000; - break; - } - - return 0; -} - -static int -ar7240_get_port_stats(struct switch_dev *dev, int port, - struct switch_port_stats *stats) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - - if (port >= AR7240_NUM_PORTS) - return -EINVAL; - - ar7240sw_capture_stats(as); - - read_lock(&as->stats_lock); - stats->rx_bytes = as->port_stats[port].rx_good_byte; - stats->tx_bytes = as->port_stats[port].tx_byte; - read_unlock(&as->stats_lock); - - return 0; -} - -static int -ar7240_set_mirror_monitor_port(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - struct mii_bus *mii = as->mii_bus; - - int port = val->value.i; - - if (port > 15) - return -EINVAL; - - ar7240sw_reg_rmw(mii, AR7240_REG_CPU_PORT, - AR7240_MIRROR_PORT_M << AR7240_MIRROR_PORT_S, - port << AR7240_MIRROR_PORT_S); - - return 0; -} - -static int -ar7240_get_mirror_monitor_port(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - struct mii_bus *mii = as->mii_bus; - - u32 ret; - - ret = ar7240sw_reg_read(mii, AR7240_REG_CPU_PORT); - val->value.i = (ret >> AR7240_MIRROR_PORT_S) & AR7240_MIRROR_PORT_M; - - return 0; -} - -static int -ar7240_set_mirror_rx(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - struct mii_bus *mii = as->mii_bus; - - int port = val->port_vlan; - - if (port >= dev->ports) - return -EINVAL; - - if (val && val->value.i == 1) - ar7240sw_reg_set(mii, AR7240_REG_PORT_CTRL(port), - AR7240_PORT_CTRL_MIRROR_RX); - else - ar7240sw_reg_rmw(mii, AR7240_REG_PORT_CTRL(port), - AR7240_PORT_CTRL_MIRROR_RX, 0); - - return 0; -} - -static int -ar7240_get_mirror_rx(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - struct mii_bus *mii = as->mii_bus; - - u32 ctrl; - - int port = val->port_vlan; - - if (port >= dev->ports) - return -EINVAL; - - ctrl = ar7240sw_reg_read(mii, AR7240_REG_PORT_CTRL(port)); - - if ((ctrl & AR7240_PORT_CTRL_MIRROR_RX) == AR7240_PORT_CTRL_MIRROR_RX) - val->value.i = 1; - else - val->value.i = 0; - - return 0; -} - -static int -ar7240_set_mirror_tx(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - struct mii_bus *mii = as->mii_bus; - - int port = val->port_vlan; - - if (port >= dev->ports) - return -EINVAL; - - if (val && val->value.i == 1) - ar7240sw_reg_set(mii, AR7240_REG_PORT_CTRL(port), - AR7240_PORT_CTRL_MIRROR_TX); - else - ar7240sw_reg_rmw(mii, AR7240_REG_PORT_CTRL(port), - AR7240_PORT_CTRL_MIRROR_TX, 0); - - return 0; -} - -static int -ar7240_get_mirror_tx(struct switch_dev *dev, const struct switch_attr *attr, - struct switch_val *val) -{ - struct ar7240sw *as = sw_to_ar7240(dev); - struct mii_bus *mii = as->mii_bus; - - u32 ctrl; - - int port = val->port_vlan; - - if (port >= dev->ports) - return -EINVAL; - - ctrl = ar7240sw_reg_read(mii, AR7240_REG_PORT_CTRL(port)); - - if ((ctrl & AR7240_PORT_CTRL_MIRROR_TX) == AR7240_PORT_CTRL_MIRROR_TX) - val->value.i = 1; - else - val->value.i = 0; - - return 0; -} - -static struct switch_attr ar7240_globals[] = { - { - .type = SWITCH_TYPE_INT, - .name = "enable_vlan", - .description = "Enable VLAN mode", - .set = ar7240_set_vlan, - .get = ar7240_get_vlan, - .max = 1 - }, - { - .type = SWITCH_TYPE_INT, - .name = "mirror_monitor_port", - .description = "Mirror monitor port", - .set = ar7240_set_mirror_monitor_port, - .get = ar7240_get_mirror_monitor_port, - .max = 15 - }, -}; - -static struct switch_attr ar7240_port[] = { - { - .type = SWITCH_TYPE_INT, - .name = "enable_mirror_rx", - .description = "Enable mirroring of RX packets", - .set = ar7240_set_mirror_rx, - .get = ar7240_get_mirror_rx, - .max = 1 - }, - { - .type = SWITCH_TYPE_INT, - .name = "enable_mirror_tx", - .description = "Enable mirroring of TX packets", - .set = ar7240_set_mirror_tx, - .get = ar7240_get_mirror_tx, - .max = 1 - }, -}; - -static struct switch_attr ar7240_vlan[] = { - { - .type = SWITCH_TYPE_INT, - .name = "vid", - .description = "VLAN ID", - .set = ar7240_set_vid, - .get = ar7240_get_vid, - .max = 4094, - }, -}; - -static const struct switch_dev_ops ar7240_ops = { - .attr_global = { - .attr = ar7240_globals, - .n_attr = ARRAY_SIZE(ar7240_globals), - }, - .attr_port = { - .attr = ar7240_port, - .n_attr = ARRAY_SIZE(ar7240_port), - }, - .attr_vlan = { - .attr = ar7240_vlan, - .n_attr = ARRAY_SIZE(ar7240_vlan), - }, - .get_port_pvid = ar7240_get_pvid, - .set_port_pvid = ar7240_set_pvid, - .get_vlan_ports = ar7240_get_ports, - .set_vlan_ports = ar7240_set_ports, - .apply_config = ar7240_hw_apply, - .reset_switch = ar7240_reset_switch, - .get_port_link = ar7240_get_port_link, - .get_port_stats = ar7240_get_port_stats, -}; - -static struct ar7240sw *ar7240_probe(struct ag71xx *ag) -{ - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - struct mii_bus *mii = ag->mii_bus; - struct ar7240sw *as; - struct switch_dev *swdev; - u32 ctrl; - u16 phy_id1; - u16 phy_id2; - int i; - - phy_id1 = ar7240sw_phy_read(mii, 0, MII_PHYSID1); - phy_id2 = ar7240sw_phy_read(mii, 0, MII_PHYSID2); - if ((phy_id1 != AR7240_PHY_ID1 || phy_id2 != AR7240_PHY_ID2) && - (phy_id1 != AR934X_PHY_ID1 || phy_id2 != AR934X_PHY_ID2)) { - pr_err("%s: unknown phy id '%04x:%04x'\n", - dev_name(&mii->dev), phy_id1, phy_id2); - return NULL; - } - - as = kzalloc(sizeof(*as), GFP_KERNEL); - if (!as) - return NULL; - - as->mii_bus = mii; - as->swdata = pdata->switch_data; - - swdev = &as->swdev; - - ctrl = ar7240sw_reg_read(mii, AR7240_REG_MASK_CTRL); - as->ver = (ctrl >> AR7240_MASK_CTRL_VERSION_S) & - AR7240_MASK_CTRL_VERSION_M; - - if (sw_is_ar7240(as)) { - swdev->name = "AR7240/AR9330 built-in switch"; - swdev->ports = AR7240_NUM_PORTS - 1; - } else if (sw_is_ar934x(as)) { - swdev->name = "AR934X built-in switch"; - - if (pdata->phy_if_mode == PHY_INTERFACE_MODE_GMII) { - ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0, - AR934X_OPER_MODE0_MAC_GMII_EN); - } else if (pdata->phy_if_mode == PHY_INTERFACE_MODE_MII) { - ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0, - AR934X_OPER_MODE0_PHY_MII_EN); - } else { - pr_err("%s: invalid PHY interface mode\n", - dev_name(&mii->dev)); - goto err_free; - } - - if (as->swdata->phy4_mii_en) { - ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE1, - AR934X_REG_OPER_MODE1_PHY4_MII_EN); - swdev->ports = AR7240_NUM_PORTS - 1; - } else { - swdev->ports = AR7240_NUM_PORTS; - } - } else { - pr_err("%s: unsupported chip, ctrl=%08x\n", - dev_name(&mii->dev), ctrl); - goto err_free; - } - - swdev->cpu_port = AR7240_PORT_CPU; - swdev->vlans = AR7240_MAX_VLANS; - swdev->ops = &ar7240_ops; - - if (register_switch(&as->swdev, ag->dev) < 0) - goto err_free; - - pr_info("%s: Found an %s\n", dev_name(&mii->dev), swdev->name); - - /* initialize defaults */ - for (i = 0; i < AR7240_MAX_VLANS; i++) - as->vlan_id[i] = i; - - as->vlan_table[0] = ar7240sw_port_mask_all(as); - - return as; - -err_free: - kfree(as); - return NULL; -} - -static void link_function(struct work_struct *work) { - struct ag71xx *ag = container_of(work, struct ag71xx, link_work.work); - struct ar7240sw *as = ag->phy_priv; - unsigned long flags; - u8 mask; - int i; - int status = 0; - - mask = ~as->swdata->phy_poll_mask; - for (i = 0; i < AR7240_NUM_PHYS; i++) { - int link; - - if (!(mask & BIT(i))) - continue; - - link = ar7240sw_phy_read(ag->mii_bus, i, MII_BMSR); - if (link & BMSR_LSTATUS) { - status = 1; - break; - } - } - - spin_lock_irqsave(&ag->lock, flags); - if (status != ag->link) { - ag->link = status; - ag71xx_link_adjust(ag); - } - spin_unlock_irqrestore(&ag->lock, flags); - - schedule_delayed_work(&ag->link_work, HZ / 2); -} - -void ag71xx_ar7240_start(struct ag71xx *ag) -{ - struct ar7240sw *as = ag->phy_priv; - - ar7240sw_reset(as); - - ag->speed = SPEED_1000; - ag->duplex = 1; - - ar7240_set_addr(as, ag->dev->dev_addr); - ar7240_hw_apply(&as->swdev); - - schedule_delayed_work(&ag->link_work, HZ / 10); -} - -void ag71xx_ar7240_stop(struct ag71xx *ag) -{ - cancel_delayed_work_sync(&ag->link_work); -} - -int ag71xx_ar7240_init(struct ag71xx *ag) -{ - struct ar7240sw *as; - - as = ar7240_probe(ag); - if (!as) - return -ENODEV; - - ag->phy_priv = as; - ar7240sw_reset(as); - - rwlock_init(&as->stats_lock); - INIT_DELAYED_WORK(&ag->link_work, link_function); - - return 0; -} - -void ag71xx_ar7240_cleanup(struct ag71xx *ag) -{ - struct ar7240sw *as = ag->phy_priv; - - if (!as) - return; - - unregister_switch(&as->swdev); - kfree(as); - ag->phy_priv = NULL; -} diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c deleted file mode 100644 index 7ec43b7221..0000000000 --- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * Special support for the Atheros ar8216 switch chip - * - * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "ag71xx.h" - -#define AR8216_PACKET_TYPE_MASK 0xf -#define AR8216_PACKET_TYPE_NORMAL 0 - -#define AR8216_HEADER_LEN 2 - -void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb) -{ - skb_push(skb, AR8216_HEADER_LEN); - skb->data[0] = 0x10; - skb->data[1] = 0x80; -} - -int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb, - int pktlen) -{ - u8 type; - - type = skb->data[1] & AR8216_PACKET_TYPE_MASK; - switch (type) { - case AR8216_PACKET_TYPE_NORMAL: - break; - - default: - return -EINVAL; - } - - skb_pull(skb, AR8216_HEADER_LEN); - return 0; -} diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c deleted file mode 100644 index 20cf1c15c8..0000000000 --- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c +++ /dev/null @@ -1,285 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/debugfs.h> - -#include "ag71xx.h" - -static struct dentry *ag71xx_debugfs_root; - -static int ag71xx_debugfs_generic_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - -void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status) -{ - if (status) - ag->debug.int_stats.total++; - if (status & AG71XX_INT_TX_PS) - ag->debug.int_stats.tx_ps++; - if (status & AG71XX_INT_TX_UR) - ag->debug.int_stats.tx_ur++; - if (status & AG71XX_INT_TX_BE) - ag->debug.int_stats.tx_be++; - if (status & AG71XX_INT_RX_PR) - ag->debug.int_stats.rx_pr++; - if (status & AG71XX_INT_RX_OF) - ag->debug.int_stats.rx_of++; - if (status & AG71XX_INT_RX_BE) - ag->debug.int_stats.rx_be++; -} - -static ssize_t read_file_int_stats(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ -#define PR_INT_STAT(_label, _field) \ - len += snprintf(buf + len, sizeof(buf) - len, \ - "%20s: %10lu\n", _label, ag->debug.int_stats._field); - - struct ag71xx *ag = file->private_data; - char buf[256]; - unsigned int len = 0; - - PR_INT_STAT("TX Packet Sent", tx_ps); - PR_INT_STAT("TX Underrun", tx_ur); - PR_INT_STAT("TX Bus Error", tx_be); - PR_INT_STAT("RX Packet Received", rx_pr); - PR_INT_STAT("RX Overflow", rx_of); - PR_INT_STAT("RX Bus Error", rx_be); - len += snprintf(buf + len, sizeof(buf) - len, "\n"); - PR_INT_STAT("Total", total); - - return simple_read_from_buffer(user_buf, count, ppos, buf, len); -#undef PR_INT_STAT -} - -static const struct file_operations ag71xx_fops_int_stats = { - .open = ag71xx_debugfs_generic_open, - .read = read_file_int_stats, - .owner = THIS_MODULE -}; - -void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx) -{ - struct ag71xx_napi_stats *stats = &ag->debug.napi_stats; - - if (rx) { - stats->rx_count++; - stats->rx_packets += rx; - if (rx <= AG71XX_NAPI_WEIGHT) - stats->rx[rx]++; - if (rx > stats->rx_packets_max) - stats->rx_packets_max = rx; - } - - if (tx) { - stats->tx_count++; - stats->tx_packets += tx; - if (tx <= AG71XX_NAPI_WEIGHT) - stats->tx[tx]++; - if (tx > stats->tx_packets_max) - stats->tx_packets_max = tx; - } -} - -static ssize_t read_file_napi_stats(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ag71xx *ag = file->private_data; - struct ag71xx_napi_stats *stats = &ag->debug.napi_stats; - char *buf; - unsigned int buflen; - unsigned int len = 0; - unsigned long rx_avg = 0; - unsigned long tx_avg = 0; - int ret; - int i; - - buflen = 2048; - buf = kmalloc(buflen, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - if (stats->rx_count) - rx_avg = stats->rx_packets / stats->rx_count; - - if (stats->tx_count) - tx_avg = stats->tx_packets / stats->tx_count; - - len += snprintf(buf + len, buflen - len, "%3s %10s %10s\n", - "len", "rx", "tx"); - - for (i = 1; i <= AG71XX_NAPI_WEIGHT; i++) - len += snprintf(buf + len, buflen - len, - "%3d: %10lu %10lu\n", - i, stats->rx[i], stats->tx[i]); - - len += snprintf(buf + len, buflen - len, "\n"); - - len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", - "sum", stats->rx_count, stats->tx_count); - len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", - "avg", rx_avg, tx_avg); - len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", - "max", stats->rx_packets_max, stats->tx_packets_max); - len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", - "pkt", stats->rx_packets, stats->tx_packets); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); - kfree(buf); - - return ret; -} - -static const struct file_operations ag71xx_fops_napi_stats = { - .open = ag71xx_debugfs_generic_open, - .read = read_file_napi_stats, - .owner = THIS_MODULE -}; - -#define DESC_PRINT_LEN 64 - -static ssize_t read_file_ring(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos, - struct ag71xx *ag, - struct ag71xx_ring *ring, - unsigned desc_reg) -{ - int ring_size = BIT(ring->order); - int ring_mask = ring_size - 1; - char *buf; - unsigned int buflen; - unsigned int len = 0; - unsigned long flags; - ssize_t ret; - int curr; - int dirty; - u32 desc_hw; - int i; - - buflen = (ring_size * DESC_PRINT_LEN); - buf = kmalloc(buflen, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - len += snprintf(buf + len, buflen - len, - "Idx ... %-8s %-8s %-8s %-8s .\n", - "desc", "next", "data", "ctrl"); - - spin_lock_irqsave(&ag->lock, flags); - - curr = (ring->curr & ring_mask); - dirty = (ring->dirty & ring_mask); - desc_hw = ag71xx_rr(ag, desc_reg); - for (i = 0; i < ring_size; i++) { - struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i); - u32 desc_dma = ((u32) ring->descs_dma) + i * AG71XX_DESC_SIZE; - - len += snprintf(buf + len, buflen - len, - "%3d %c%c%c %08x %08x %08x %08x %c\n", - i, - (i == curr) ? 'C' : ' ', - (i == dirty) ? 'D' : ' ', - (desc_hw == desc_dma) ? 'H' : ' ', - desc_dma, - desc->next, - desc->data, - desc->ctrl, - (desc->ctrl & DESC_EMPTY) ? 'E' : '*'); - } - - spin_unlock_irqrestore(&ag->lock, flags); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); - kfree(buf); - - return ret; -} - -static ssize_t read_file_tx_ring(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ag71xx *ag = file->private_data; - - return read_file_ring(file, user_buf, count, ppos, ag, &ag->tx_ring, - AG71XX_REG_TX_DESC); -} - -static const struct file_operations ag71xx_fops_tx_ring = { - .open = ag71xx_debugfs_generic_open, - .read = read_file_tx_ring, - .owner = THIS_MODULE -}; - -static ssize_t read_file_rx_ring(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ag71xx *ag = file->private_data; - - return read_file_ring(file, user_buf, count, ppos, ag, &ag->rx_ring, - AG71XX_REG_RX_DESC); -} - -static const struct file_operations ag71xx_fops_rx_ring = { - .open = ag71xx_debugfs_generic_open, - .read = read_file_rx_ring, - .owner = THIS_MODULE -}; - -void ag71xx_debugfs_exit(struct ag71xx *ag) -{ - debugfs_remove_recursive(ag->debug.debugfs_dir); -} - -int ag71xx_debugfs_init(struct ag71xx *ag) -{ - struct device *dev = &ag->pdev->dev; - - ag->debug.debugfs_dir = debugfs_create_dir(dev_name(dev), - ag71xx_debugfs_root); - if (!ag->debug.debugfs_dir) { - dev_err(dev, "unable to create debugfs directory\n"); - return -ENOENT; - } - - debugfs_create_file("int_stats", S_IRUGO, ag->debug.debugfs_dir, - ag, &ag71xx_fops_int_stats); - debugfs_create_file("napi_stats", S_IRUGO, ag->debug.debugfs_dir, - ag, &ag71xx_fops_napi_stats); - debugfs_create_file("tx_ring", S_IRUGO, ag->debug.debugfs_dir, - ag, &ag71xx_fops_tx_ring); - debugfs_create_file("rx_ring", S_IRUGO, ag->debug.debugfs_dir, - ag, &ag71xx_fops_rx_ring); - - return 0; -} - -int ag71xx_debugfs_root_init(void) -{ - if (ag71xx_debugfs_root) - return -EBUSY; - - ag71xx_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL); - if (!ag71xx_debugfs_root) - return -ENOENT; - - return 0; -} - -void ag71xx_debugfs_root_exit(void) -{ - debugfs_remove(ag71xx_debugfs_root); - ag71xx_debugfs_root = NULL; -} diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c deleted file mode 100644 index 9e5a53e7fc..0000000000 --- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "ag71xx.h" -#include <linux/version.h> - -static void ag71xx_ethtool_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - struct ag71xx *ag = netdev_priv(dev); - - strcpy(info->driver, ag->pdev->dev.driver->name); - strcpy(info->version, AG71XX_DRV_VERSION); - strcpy(info->bus_info, dev_name(&ag->pdev->dev)); -} - -static u32 ag71xx_ethtool_get_msglevel(struct net_device *dev) -{ - struct ag71xx *ag = netdev_priv(dev); - - return ag->msg_enable; -} - -static void ag71xx_ethtool_set_msglevel(struct net_device *dev, u32 msg_level) -{ - struct ag71xx *ag = netdev_priv(dev); - - ag->msg_enable = msg_level; -} - -static void ag71xx_ethtool_get_ringparam(struct net_device *dev, - struct ethtool_ringparam *er) -{ - struct ag71xx *ag = netdev_priv(dev); - - er->tx_max_pending = AG71XX_TX_RING_SIZE_MAX; - er->rx_max_pending = AG71XX_RX_RING_SIZE_MAX; - er->rx_mini_max_pending = 0; - er->rx_jumbo_max_pending = 0; - - er->tx_pending = BIT(ag->tx_ring.order); - er->rx_pending = BIT(ag->rx_ring.order); - er->rx_mini_pending = 0; - er->rx_jumbo_pending = 0; - - if (ag->tx_ring.desc_split) - er->tx_pending /= AG71XX_TX_RING_DS_PER_PKT; -} - -static int ag71xx_ethtool_set_ringparam(struct net_device *dev, - struct ethtool_ringparam *er) -{ - struct ag71xx *ag = netdev_priv(dev); - unsigned tx_size; - unsigned rx_size; - int err = 0; - - if (er->rx_mini_pending != 0|| - er->rx_jumbo_pending != 0 || - er->rx_pending == 0 || - er->tx_pending == 0) - return -EINVAL; - - tx_size = er->tx_pending < AG71XX_TX_RING_SIZE_MAX ? - er->tx_pending : AG71XX_TX_RING_SIZE_MAX; - - rx_size = er->rx_pending < AG71XX_RX_RING_SIZE_MAX ? - er->rx_pending : AG71XX_RX_RING_SIZE_MAX; - - if (netif_running(dev)) { - err = dev->netdev_ops->ndo_stop(dev); - if (err) - return err; - } - - if (ag->tx_ring.desc_split) - tx_size *= AG71XX_TX_RING_DS_PER_PKT; - - ag->tx_ring.order = ag71xx_ring_size_order(tx_size); - ag->rx_ring.order = ag71xx_ring_size_order(rx_size); - - if (netif_running(dev)) - err = dev->netdev_ops->ndo_open(dev); - - return err; -} - -static int ag71xx_ethtool_nway_reset(struct net_device *dev) -{ - struct ag71xx *ag = netdev_priv(dev); - struct phy_device *phydev = ag->phy_dev; - - if (!phydev) - return -ENODEV; - - return genphy_restart_aneg(phydev); -} - -struct ethtool_ops ag71xx_ethtool_ops = { - .get_drvinfo = ag71xx_ethtool_get_drvinfo, - .get_msglevel = ag71xx_ethtool_get_msglevel, - .set_msglevel = ag71xx_ethtool_set_msglevel, - .get_ringparam = ag71xx_ethtool_get_ringparam, - .set_ringparam = ag71xx_ethtool_set_ringparam, - .get_link_ksettings = phy_ethtool_get_link_ksettings, - .set_link_ksettings = phy_ethtool_set_link_ksettings, - .get_link = ethtool_op_get_link, - .get_ts_info = ethtool_op_get_ts_info, - .nway_reset = ag71xx_ethtool_nway_reset, -}; diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c deleted file mode 100644 index ebbe8a7472..0000000000 --- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c +++ /dev/null @@ -1,1494 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "ag71xx.h" - -#define AG71XX_DEFAULT_MSG_ENABLE \ - (NETIF_MSG_DRV \ - | NETIF_MSG_PROBE \ - | NETIF_MSG_LINK \ - | NETIF_MSG_TIMER \ - | NETIF_MSG_IFDOWN \ - | NETIF_MSG_IFUP \ - | NETIF_MSG_RX_ERR \ - | NETIF_MSG_TX_ERR) - -static int ag71xx_msg_level = -1; - -module_param_named(msg_level, ag71xx_msg_level, int, 0); -MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)"); - -#define ETH_SWITCH_HEADER_LEN 2 - -static int ag71xx_tx_packets(struct ag71xx *ag, bool flush); -static void ag71xx_qca955x_sgmii_init(void); - -static inline unsigned int ag71xx_max_frame_len(unsigned int mtu) -{ - return ETH_SWITCH_HEADER_LEN + ETH_HLEN + VLAN_HLEN + mtu + ETH_FCS_LEN; -} - -static void ag71xx_dump_dma_regs(struct ag71xx *ag) -{ - DBG("%s: dma_tx_ctrl=%08x, dma_tx_desc=%08x, dma_tx_status=%08x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_TX_CTRL), - ag71xx_rr(ag, AG71XX_REG_TX_DESC), - ag71xx_rr(ag, AG71XX_REG_TX_STATUS)); - - DBG("%s: dma_rx_ctrl=%08x, dma_rx_desc=%08x, dma_rx_status=%08x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_RX_CTRL), - ag71xx_rr(ag, AG71XX_REG_RX_DESC), - ag71xx_rr(ag, AG71XX_REG_RX_STATUS)); -} - -static void ag71xx_dump_regs(struct ag71xx *ag) -{ - DBG("%s: mac_cfg1=%08x, mac_cfg2=%08x, ipg=%08x, hdx=%08x, mfl=%08x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_MAC_CFG1), - ag71xx_rr(ag, AG71XX_REG_MAC_CFG2), - ag71xx_rr(ag, AG71XX_REG_MAC_IPG), - ag71xx_rr(ag, AG71XX_REG_MAC_HDX), - ag71xx_rr(ag, AG71XX_REG_MAC_MFL)); - DBG("%s: mac_ifctl=%08x, mac_addr1=%08x, mac_addr2=%08x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL), - ag71xx_rr(ag, AG71XX_REG_MAC_ADDR1), - ag71xx_rr(ag, AG71XX_REG_MAC_ADDR2)); - DBG("%s: fifo_cfg0=%08x, fifo_cfg1=%08x, fifo_cfg2=%08x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0), - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1), - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2)); - DBG("%s: fifo_cfg3=%08x, fifo_cfg4=%08x, fifo_cfg5=%08x\n", - ag->dev->name, - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3), - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4), - ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5)); -} - -static inline void ag71xx_dump_intr(struct ag71xx *ag, char *label, u32 intr) -{ - DBG("%s: %s intr=%08x %s%s%s%s%s%s\n", - ag->dev->name, label, intr, - (intr & AG71XX_INT_TX_PS) ? "TXPS " : "", - (intr & AG71XX_INT_TX_UR) ? "TXUR " : "", - (intr & AG71XX_INT_TX_BE) ? "TXBE " : "", - (intr & AG71XX_INT_RX_PR) ? "RXPR " : "", - (intr & AG71XX_INT_RX_OF) ? "RXOF " : "", - (intr & AG71XX_INT_RX_BE) ? "RXBE " : ""); -} - -static void ag71xx_ring_tx_clean(struct ag71xx *ag) -{ - struct ag71xx_ring *ring = &ag->tx_ring; - struct net_device *dev = ag->dev; - int ring_mask = BIT(ring->order) - 1; - u32 bytes_compl = 0, pkts_compl = 0; - - while (ring->curr != ring->dirty) { - struct ag71xx_desc *desc; - u32 i = ring->dirty & ring_mask; - - desc = ag71xx_ring_desc(ring, i); - if (!ag71xx_desc_empty(desc)) { - desc->ctrl = 0; - dev->stats.tx_errors++; - } - - if (ring->buf[i].skb) { - bytes_compl += ring->buf[i].len; - pkts_compl++; - dev_kfree_skb_any(ring->buf[i].skb); - } - ring->buf[i].skb = NULL; - ring->dirty++; - } - - /* flush descriptors */ - wmb(); - - netdev_completed_queue(dev, pkts_compl, bytes_compl); -} - -static void ag71xx_ring_tx_init(struct ag71xx *ag) -{ - struct ag71xx_ring *ring = &ag->tx_ring; - int ring_size = BIT(ring->order); - int ring_mask = BIT(ring->order) - 1; - int i; - - for (i = 0; i < ring_size; i++) { - struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i); - - desc->next = (u32) (ring->descs_dma + - AG71XX_DESC_SIZE * ((i + 1) & ring_mask)); - - desc->ctrl = DESC_EMPTY; - ring->buf[i].skb = NULL; - } - - /* flush descriptors */ - wmb(); - - ring->curr = 0; - ring->dirty = 0; - netdev_reset_queue(ag->dev); -} - -static void ag71xx_ring_rx_clean(struct ag71xx *ag) -{ - struct ag71xx_ring *ring = &ag->rx_ring; - int ring_size = BIT(ring->order); - int i; - - if (!ring->buf) - return; - - for (i = 0; i < ring_size; i++) - if (ring->buf[i].rx_buf) { - dma_unmap_single(&ag->pdev->dev, ring->buf[i].dma_addr, - ag->rx_buf_size, DMA_FROM_DEVICE); - skb_free_frag(ring->buf[i].rx_buf); - } -} - -static int ag71xx_buffer_offset(struct ag71xx *ag) -{ - int offset = NET_SKB_PAD; - - /* - * On AR71xx/AR91xx packets must be 4-byte aligned. - * - * When using builtin AR8216 support, hardware adds a 2-byte header, - * so we don't need any extra alignment in that case. - */ - if (!ag71xx_get_pdata(ag)->is_ar724x || ag71xx_has_ar8216(ag)) - return offset; - - return offset + NET_IP_ALIGN; -} - -static int ag71xx_buffer_size(struct ag71xx *ag) -{ - return ag->rx_buf_size + - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); -} - -static bool ag71xx_fill_rx_buf(struct ag71xx *ag, struct ag71xx_buf *buf, - int offset, - void *(*alloc)(unsigned int size)) -{ - struct ag71xx_ring *ring = &ag->rx_ring; - struct ag71xx_desc *desc = ag71xx_ring_desc(ring, buf - &ring->buf[0]); - void *data; - - data = alloc(ag71xx_buffer_size(ag)); - if (!data) - return false; - - buf->rx_buf = data; - buf->dma_addr = dma_map_single(&ag->pdev->dev, data, ag->rx_buf_size, - DMA_FROM_DEVICE); - desc->data = (u32) buf->dma_addr + offset; - return true; -} - -static int ag71xx_ring_rx_init(struct ag71xx *ag) -{ - struct ag71xx_ring *ring = &ag->rx_ring; - int ring_size = BIT(ring->order); - int ring_mask = BIT(ring->order) - 1; - unsigned int i; - int ret; - int offset = ag71xx_buffer_offset(ag); - - ret = 0; - for (i = 0; i < ring_size; i++) { - struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i); - - desc->next = (u32) (ring->descs_dma + - AG71XX_DESC_SIZE * ((i + 1) & ring_mask)); - - DBG("ag71xx: RX desc at %p, next is %08x\n", - desc, desc->next); - } - - for (i = 0; i < ring_size; i++) { - struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i); - - if (!ag71xx_fill_rx_buf(ag, &ring->buf[i], offset, - netdev_alloc_frag)) { - ret = -ENOMEM; - break; - } - - desc->ctrl = DESC_EMPTY; - } - - /* flush descriptors */ - wmb(); - - ring->curr = 0; - ring->dirty = 0; - - return ret; -} - -static int ag71xx_ring_rx_refill(struct ag71xx *ag) -{ - struct ag71xx_ring *ring = &ag->rx_ring; - int ring_mask = BIT(ring->order) - 1; - unsigned int count; - int offset = ag71xx_buffer_offset(ag); - - count = 0; - for (; ring->curr - ring->dirty > 0; ring->dirty++) { - struct ag71xx_desc *desc; - unsigned int i; - - i = ring->dirty & ring_mask; - desc = ag71xx_ring_desc(ring, i); - - if (!ring->buf[i].rx_buf && - !ag71xx_fill_rx_buf(ag, &ring->buf[i], offset, - napi_alloc_frag)) - break; - - desc->ctrl = DESC_EMPTY; - count++; - } - - /* flush descriptors */ - wmb(); - - DBG("%s: %u rx descriptors refilled\n", ag->dev->name, count); - - return count; -} - -static int ag71xx_rings_init(struct ag71xx *ag) -{ - struct ag71xx_ring *tx = &ag->tx_ring; - struct ag71xx_ring *rx = &ag->rx_ring; - int ring_size = BIT(tx->order) + BIT(rx->order); - int tx_size = BIT(tx->order); - - tx->buf = kzalloc(ring_size * sizeof(*tx->buf), GFP_KERNEL); - if (!tx->buf) - return -ENOMEM; - - tx->descs_cpu = dma_alloc_coherent(&ag->pdev->dev, ring_size * AG71XX_DESC_SIZE, - &tx->descs_dma, GFP_KERNEL); - if (!tx->descs_cpu) { - kfree(tx->buf); - tx->buf = NULL; - return -ENOMEM; - } - - rx->buf = &tx->buf[tx_size]; - rx->descs_cpu = ((void *)tx->descs_cpu) + tx_size * AG71XX_DESC_SIZE; - rx->descs_dma = tx->descs_dma + tx_size * AG71XX_DESC_SIZE; - - ag71xx_ring_tx_init(ag); - return ag71xx_ring_rx_init(ag); -} - -static void ag71xx_rings_free(struct ag71xx *ag) -{ - struct ag71xx_ring *tx = &ag->tx_ring; - struct ag71xx_ring *rx = &ag->rx_ring; - int ring_size = BIT(tx->order) + BIT(rx->order); - - if (tx->descs_cpu) - dma_free_coherent(&ag->pdev->dev, ring_size * AG71XX_DESC_SIZE, - tx->descs_cpu, tx->descs_dma); - - kfree(tx->buf); - - tx->descs_cpu = NULL; - rx->descs_cpu = NULL; - tx->buf = NULL; - rx->buf = NULL; -} - -static void ag71xx_rings_cleanup(struct ag71xx *ag) -{ - ag71xx_ring_rx_clean(ag); - ag71xx_ring_tx_clean(ag); - ag71xx_rings_free(ag); - - netdev_reset_queue(ag->dev); -} - -static unsigned char *ag71xx_speed_str(struct ag71xx *ag) -{ - switch (ag->speed) { - case SPEED_1000: - return "1000"; - case SPEED_100: - return "100"; - case SPEED_10: - return "10"; - } - - return "?"; -} - -static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac) -{ - u32 t; - - t = (((u32) mac[5]) << 24) | (((u32) mac[4]) << 16) - | (((u32) mac[3]) << 8) | ((u32) mac[2]); - - ag71xx_wr(ag, AG71XX_REG_MAC_ADDR1, t); - - t = (((u32) mac[1]) << 24) | (((u32) mac[0]) << 16); - ag71xx_wr(ag, AG71XX_REG_MAC_ADDR2, t); -} - -static void ag71xx_dma_reset(struct ag71xx *ag) -{ - u32 val; - int i; - - ag71xx_dump_dma_regs(ag); - - /* stop RX and TX */ - ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0); - ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0); - - /* - * give the hardware some time to really stop all rx/tx activity - * clearing the descriptors too early causes random memory corruption - */ - mdelay(1); - - /* clear descriptor addresses */ - ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->stop_desc_dma); - ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->stop_desc_dma); - - /* clear pending RX/TX interrupts */ - for (i = 0; i < 256; i++) { - ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR); - ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS); - } - - /* clear pending errors */ - ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE | RX_STATUS_OF); - ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE | TX_STATUS_UR); - - val = ag71xx_rr(ag, AG71XX_REG_RX_STATUS); - if (val) - pr_alert("%s: unable to clear DMA Rx status: %08x\n", - ag->dev->name, val); - - val = ag71xx_rr(ag, AG71XX_REG_TX_STATUS); - - /* mask out reserved bits */ - val &= ~0xff000000; - - if (val) - pr_alert("%s: unable to clear DMA Tx status: %08x\n", - ag->dev->name, val); - - ag71xx_dump_dma_regs(ag); -} - -#define MAC_CFG1_INIT (MAC_CFG1_RXE | MAC_CFG1_TXE | \ - MAC_CFG1_SRX | MAC_CFG1_STX) - -#define FIFO_CFG0_INIT (FIFO_CFG0_ALL << FIFO_CFG0_ENABLE_SHIFT) - -#define FIFO_CFG4_INIT (FIFO_CFG4_DE | FIFO_CFG4_DV | FIFO_CFG4_FC | \ - FIFO_CFG4_CE | FIFO_CFG4_CR | FIFO_CFG4_LM | \ - FIFO_CFG4_LO | FIFO_CFG4_OK | FIFO_CFG4_MC | \ - FIFO_CFG4_BC | FIFO_CFG4_DR | FIFO_CFG4_LE | \ - FIFO_CFG4_CF | FIFO_CFG4_PF | FIFO_CFG4_UO | \ - FIFO_CFG4_VT) - -#define FIFO_CFG5_INIT (FIFO_CFG5_DE | FIFO_CFG5_DV | FIFO_CFG5_FC | \ - FIFO_CFG5_CE | FIFO_CFG5_LO | FIFO_CFG5_OK | \ - FIFO_CFG5_MC | FIFO_CFG5_BC | FIFO_CFG5_DR | \ - FIFO_CFG5_CF | FIFO_CFG5_PF | FIFO_CFG5_VT | \ - FIFO_CFG5_LE | FIFO_CFG5_FT | FIFO_CFG5_16 | \ - FIFO_CFG5_17 | FIFO_CFG5_SF) - -static void ag71xx_hw_stop(struct ag71xx *ag) -{ - /* disable all interrupts and stop the rx/tx engine */ - ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, 0); - ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0); - ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0); -} - -static void ag71xx_hw_setup(struct ag71xx *ag) -{ - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - u32 init = MAC_CFG1_INIT; - - /* setup MAC configuration registers */ - if (pdata->use_flow_control) - init |= MAC_CFG1_TFC | MAC_CFG1_RFC; - ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, init); - - ag71xx_sb(ag, AG71XX_REG_MAC_CFG2, - MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK); - - /* setup max frame length to zero */ - ag71xx_wr(ag, AG71XX_REG_MAC_MFL, 0); - - /* setup FIFO configuration registers */ - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG0, FIFO_CFG0_INIT); - if (pdata->is_ar724x) { - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, 0x0010ffff); - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, 0x015500aa); - } else { - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, 0x0fff0000); - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, 0x00001fff); - } - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG4, FIFO_CFG4_INIT); - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, FIFO_CFG5_INIT); -} - -static void ag71xx_hw_init(struct ag71xx *ag) -{ - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - u32 reset_mask = pdata->reset_bit; - - ag71xx_hw_stop(ag); - - if (pdata->is_ar724x) { - u32 reset_phy = reset_mask; - - reset_phy &= AR71XX_RESET_GE0_PHY | AR71XX_RESET_GE1_PHY; - reset_mask &= ~(AR71XX_RESET_GE0_PHY | AR71XX_RESET_GE1_PHY); - - ath79_device_reset_set(reset_phy); - msleep(50); - ath79_device_reset_clear(reset_phy); - msleep(200); - } - - ag71xx_sb(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_SR); - udelay(20); - - ath79_device_reset_set(reset_mask); - msleep(100); - ath79_device_reset_clear(reset_mask); - msleep(200); - - ag71xx_hw_setup(ag); - - ag71xx_dma_reset(ag); -} - -static void ag71xx_fast_reset(struct ag71xx *ag) -{ - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - struct net_device *dev = ag->dev; - u32 reset_mask = pdata->reset_bit; - u32 rx_ds; - u32 mii_reg; - - reset_mask &= AR71XX_RESET_GE0_MAC | AR71XX_RESET_GE1_MAC; - - ag71xx_hw_stop(ag); - wmb(); - - mii_reg = ag71xx_rr(ag, AG71XX_REG_MII_CFG); - rx_ds = ag71xx_rr(ag, AG71XX_REG_RX_DESC); - - ag71xx_tx_packets(ag, true); - - ath79_device_reset_set(reset_mask); - udelay(10); - ath79_device_reset_clear(reset_mask); - udelay(10); - - ag71xx_dma_reset(ag); - ag71xx_hw_setup(ag); - ag->tx_ring.curr = 0; - ag->tx_ring.dirty = 0; - netdev_reset_queue(ag->dev); - - /* setup max frame length */ - ag71xx_wr(ag, AG71XX_REG_MAC_MFL, - ag71xx_max_frame_len(ag->dev->mtu)); - - ag71xx_wr(ag, AG71XX_REG_RX_DESC, rx_ds); - ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->tx_ring.descs_dma); - ag71xx_wr(ag, AG71XX_REG_MII_CFG, mii_reg); - - ag71xx_hw_set_macaddr(ag, dev->dev_addr); -} - -static void ag71xx_hw_start(struct ag71xx *ag) -{ - /* start RX engine */ - ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE); - - /* enable interrupts */ - ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, AG71XX_INT_INIT); - - netif_wake_queue(ag->dev); -} - -static void -__ag71xx_link_adjust(struct ag71xx *ag, bool update) -{ - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - u32 cfg2; - u32 ifctl; - u32 fifo5; - u32 fifo3; - - if (!ag->link && update) { - ag71xx_hw_stop(ag); - netif_carrier_off(ag->dev); - if (netif_msg_link(ag)) - pr_info("%s: link down\n", ag->dev->name); - return; - } - - if (pdata->is_ar724x) - ag71xx_fast_reset(ag); - - cfg2 = ag71xx_rr(ag, AG71XX_REG_MAC_CFG2); - cfg2 &= ~(MAC_CFG2_IF_1000 | MAC_CFG2_IF_10_100 | MAC_CFG2_FDX); - cfg2 |= (ag->duplex) ? MAC_CFG2_FDX : 0; - - ifctl = ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL); - ifctl &= ~(MAC_IFCTL_SPEED); - - fifo5 = ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5); - fifo5 &= ~FIFO_CFG5_BM; - - switch (ag->speed) { - case SPEED_1000: - cfg2 |= MAC_CFG2_IF_1000; - fifo5 |= FIFO_CFG5_BM; - break; - case SPEED_100: - cfg2 |= MAC_CFG2_IF_10_100; - ifctl |= MAC_IFCTL_SPEED; - break; - case SPEED_10: - cfg2 |= MAC_CFG2_IF_10_100; - break; - default: - BUG(); - return; - } - - if (pdata->is_ar91xx) - fifo3 = 0x00780fff; - else if (pdata->is_ar724x) - fifo3 = 0x01f00140; - else - fifo3 = 0x008001ff; - - if (ag->tx_ring.desc_split) { - fifo3 &= 0xffff; - fifo3 |= ((2048 - ag->tx_ring.desc_split) / 4) << 16; - } - - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, fifo3); - - if (update && pdata->set_speed) - pdata->set_speed(ag->speed); - - if (update && pdata->enable_sgmii_fixup) - ag71xx_qca955x_sgmii_init(); - - ag71xx_wr(ag, AG71XX_REG_MAC_CFG2, cfg2); - ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, fifo5); - ag71xx_wr(ag, AG71XX_REG_MAC_IFCTL, ifctl); - - if (pdata->disable_inline_checksum_engine) { - /* - * The rx ring buffer can stall on small packets on QCA953x and - * QCA956x. Disabling the inline checksum engine fixes the stall. - * The wr, rr functions cannot be used since this hidden register - * is outside of the normal ag71xx register block. - */ - void __iomem *dam = ioremap_nocache(0xb90001bc, 0x4); - if (dam) { - __raw_writel(__raw_readl(dam) & ~BIT(27), dam); - (void)__raw_readl(dam); - iounmap(dam); - } - } - - ag71xx_hw_start(ag); - - netif_carrier_on(ag->dev); - if (update && netif_msg_link(ag)) - pr_info("%s: link up (%sMbps/%s duplex)\n", - ag->dev->name, - ag71xx_speed_str(ag), - (DUPLEX_FULL == ag->duplex) ? "Full" : "Half"); - - ag71xx_dump_regs(ag); -} - -void ag71xx_link_adjust(struct ag71xx *ag) -{ - __ag71xx_link_adjust(ag, true); -} - -static int ag71xx_hw_enable(struct ag71xx *ag) -{ - int ret; - - ret = ag71xx_rings_init(ag); - if (ret) - return ret; - - napi_enable(&ag->napi); - ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->tx_ring.descs_dma); - ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->rx_ring.descs_dma); - netif_start_queue(ag->dev); - - return 0; -} - -static void ag71xx_hw_disable(struct ag71xx *ag) -{ - netif_stop_queue(ag->dev); - - ag71xx_hw_stop(ag); - ag71xx_dma_reset(ag); - - napi_disable(&ag->napi); - del_timer_sync(&ag->oom_timer); - - ag71xx_rings_cleanup(ag); -} - -static int ag71xx_open(struct net_device *dev) -{ - struct ag71xx *ag = netdev_priv(dev); - unsigned int max_frame_len; - int ret; - - netif_carrier_off(dev); - max_frame_len = ag71xx_max_frame_len(dev->mtu); - ag->rx_buf_size = SKB_DATA_ALIGN(max_frame_len + NET_SKB_PAD + NET_IP_ALIGN); - - /* setup max frame length */ - ag71xx_wr(ag, AG71XX_REG_MAC_MFL, max_frame_len); - ag71xx_hw_set_macaddr(ag, dev->dev_addr); - - ret = ag71xx_hw_enable(ag); - if (ret) - goto err; - - ag71xx_phy_start(ag); - - return 0; - -err: - ag71xx_rings_cleanup(ag); - return ret; -} - -static int ag71xx_stop(struct net_device *dev) -{ - struct ag71xx *ag = netdev_priv(dev); - - netif_carrier_off(dev); - ag71xx_phy_stop(ag); - ag71xx_hw_disable(ag); - - return 0; -} - -static int ag71xx_fill_dma_desc(struct ag71xx_ring *ring, u32 addr, int len) -{ - int i; - struct ag71xx_desc *desc; - int ring_mask = BIT(ring->order) - 1; - int ndesc = 0; - int split = ring->desc_split; - - if (!split) - split = len; - - while (len > 0) { - unsigned int cur_len = len; - - i = (ring->curr + ndesc) & ring_mask; - desc = ag71xx_ring_desc(ring, i); - - if (!ag71xx_desc_empty(desc)) - return -1; - - if (cur_len > split) { - cur_len = split; - - /* - * TX will hang if DMA transfers <= 4 bytes, - * make sure next segment is more than 4 bytes long. - */ - if (len <= split + 4) - cur_len -= 4; - } - - desc->data = addr; - addr += cur_len; - len -= cur_len; - - if (len > 0) - cur_len |= DESC_MORE; - - /* prevent early tx attempt of this descriptor */ - if (!ndesc) - cur_len |= DESC_EMPTY; - - desc->ctrl = cur_len; - ndesc++; - } - - return ndesc; -} - -static netdev_tx_t ag71xx_hard_start_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct ag71xx *ag = netdev_priv(dev); - struct ag71xx_ring *ring = &ag->tx_ring; - int ring_mask = BIT(ring->order) - 1; - int ring_size = BIT(ring->order); - struct ag71xx_desc *desc; - dma_addr_t dma_addr; - int i, n, ring_min; - - if (ag71xx_has_ar8216(ag)) - ag71xx_add_ar8216_header(ag, skb); - - if (skb->len <= 4) { - DBG("%s: packet len is too small\n", ag->dev->name); - goto err_drop; - } - - dma_addr = dma_map_single(&ag->pdev->dev, skb->data, skb->len, - DMA_TO_DEVICE); - - i = ring->curr & ring_mask; - desc = ag71xx_ring_desc(ring, i); - - /* setup descriptor fields */ - n = ag71xx_fill_dma_desc(ring, (u32) dma_addr, skb->len & ag->desc_pktlen_mask); - if (n < 0) - goto err_drop_unmap; - - i = (ring->curr + n - 1) & ring_mask; - ring->buf[i].len = skb->len; - ring->buf[i].skb = skb; - - netdev_sent_queue(dev, skb->len); - - skb_tx_timestamp(skb); - - desc->ctrl &= ~DESC_EMPTY; - ring->curr += n; - - /* flush descriptor */ - wmb(); - - ring_min = 2; - if (ring->desc_split) - ring_min *= AG71XX_TX_RING_DS_PER_PKT; - - if (ring->curr - ring->dirty >= ring_size - ring_min) { - DBG("%s: tx queue full\n", dev->name); - netif_stop_queue(dev); - } - - DBG("%s: packet injected into TX queue\n", ag->dev->name); - - /* enable TX engine */ - ag71xx_wr(ag, AG71XX_REG_TX_CTRL, TX_CTRL_TXE); - - return NETDEV_TX_OK; - -err_drop_unmap: - dma_unmap_single(&ag->pdev->dev, dma_addr, skb->len, DMA_TO_DEVICE); - -err_drop: - dev->stats.tx_dropped++; - - dev_kfree_skb(skb); - return NETDEV_TX_OK; -} - -static int ag71xx_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - struct ag71xx *ag = netdev_priv(dev); - - switch (cmd) { - case SIOCSIFHWADDR: - if (copy_from_user - (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr))) - return -EFAULT; - return 0; - - case SIOCGIFHWADDR: - if (copy_to_user - (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr))) - return -EFAULT; - return 0; - - case SIOCGMIIPHY: - case SIOCGMIIREG: - case SIOCSMIIREG: - if (ag->phy_dev == NULL) - break; - - return phy_mii_ioctl(ag->phy_dev, ifr, cmd); - - default: - break; - } - - return -EOPNOTSUPP; -} - -static void ag71xx_oom_timer_handler(unsigned long data) -{ - struct net_device *dev = (struct net_device *) data; - struct ag71xx *ag = netdev_priv(dev); - - napi_schedule(&ag->napi); -} - -static void ag71xx_tx_timeout(struct net_device *dev) -{ - struct ag71xx *ag = netdev_priv(dev); - - if (netif_msg_tx_err(ag)) - pr_info("%s: tx timeout\n", ag->dev->name); - - schedule_delayed_work(&ag->restart_work, 1); -} - -static void ag71xx_bit_set(void __iomem *reg, u32 bit) -{ - u32 val = __raw_readl(reg) | bit; - __raw_writel(val, reg); - __raw_readl(reg); -} - -static void ag71xx_bit_clear(void __iomem *reg, u32 bit) -{ - u32 val = __raw_readl(reg) & ~bit; - __raw_writel(val, reg); - __raw_readl(reg); -} - -static void ag71xx_qca955x_sgmii_init() -{ - void __iomem *gmac_base; - u32 mr_an_status, sgmii_status; - u8 tries = 0; - - gmac_base = ioremap_nocache(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE); - - if (!gmac_base) - goto sgmii_out; - - mr_an_status = __raw_readl(gmac_base + QCA955X_GMAC_REG_MR_AN_STATUS); - if (!(mr_an_status & QCA955X_MR_AN_STATUS_AN_ABILITY)) - goto sgmii_out; - - __raw_writel(QCA955X_SGMII_RESET_RX_CLK_N_RESET , - gmac_base + QCA955X_GMAC_REG_SGMII_RESET); - __raw_readl(gmac_base + QCA955X_GMAC_REG_SGMII_RESET); - udelay(10); - - /* Init sequence */ - ag71xx_bit_set(gmac_base + QCA955X_GMAC_REG_SGMII_RESET, - QCA955X_SGMII_RESET_HW_RX_125M_N); - udelay(10); - - ag71xx_bit_set(gmac_base + QCA955X_GMAC_REG_SGMII_RESET, - QCA955X_SGMII_RESET_RX_125M_N); - udelay(10); - - ag71xx_bit_set(gmac_base + QCA955X_GMAC_REG_SGMII_RESET, - QCA955X_SGMII_RESET_TX_125M_N); - udelay(10); - - ag71xx_bit_set(gmac_base + QCA955X_GMAC_REG_SGMII_RESET, - QCA955X_SGMII_RESET_RX_CLK_N); - udelay(10); - - ag71xx_bit_set(gmac_base + QCA955X_GMAC_REG_SGMII_RESET, - QCA955X_SGMII_RESET_TX_CLK_N); - udelay(10); - - do { - ag71xx_bit_set(gmac_base + QCA955X_GMAC_REG_MR_AN_CONTROL, - QCA955X_MR_AN_CONTROL_PHY_RESET | - QCA955X_MR_AN_CONTROL_AN_ENABLE); - udelay(100); - ag71xx_bit_clear(gmac_base + QCA955X_GMAC_REG_MR_AN_CONTROL, - QCA955X_MR_AN_CONTROL_PHY_RESET); - mdelay(10); - sgmii_status = __raw_readl(gmac_base + QCA955X_GMAC_REG_SGMII_DEBUG) & 0xF; - - if (tries++ >= QCA955X_SGMII_LINK_WAR_MAX_TRY) { - pr_warn("ag71xx: max retries for SGMII fixup exceeded!\n"); - break; - } - } while (!(sgmii_status == 0xf || sgmii_status == 0x10)); - -sgmii_out: - iounmap(gmac_base); -} - -static void ag71xx_restart_work_func(struct work_struct *work) -{ - struct ag71xx *ag = container_of(work, struct ag71xx, restart_work.work); - - rtnl_lock(); - ag71xx_hw_disable(ag); - ag71xx_hw_enable(ag); - if (ag->link) - __ag71xx_link_adjust(ag, false); - rtnl_unlock(); -} - -static bool ag71xx_check_dma_stuck(struct ag71xx *ag) -{ - unsigned long timestamp; - u32 rx_sm, tx_sm, rx_fd; - - timestamp = netdev_get_tx_queue(ag->dev, 0)->trans_start; - if (likely(time_before(jiffies, timestamp + HZ/10))) - return false; - - if (!netif_carrier_ok(ag->dev)) - return false; - - rx_sm = ag71xx_rr(ag, AG71XX_REG_RX_SM); - if ((rx_sm & 0x7) == 0x3 && ((rx_sm >> 4) & 0x7) == 0x6) - return true; - - tx_sm = ag71xx_rr(ag, AG71XX_REG_TX_SM); - rx_fd = ag71xx_rr(ag, AG71XX_REG_FIFO_DEPTH); - if (((tx_sm >> 4) & 0x7) == 0 && ((rx_sm & 0x7) == 0) && - ((rx_sm >> 4) & 0x7) == 0 && rx_fd == 0) - return true; - - return false; -} - -static int ag71xx_tx_packets(struct ag71xx *ag, bool flush) -{ - struct ag71xx_ring *ring = &ag->tx_ring; - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - bool dma_stuck = false; - int ring_mask = BIT(ring->order) - 1; - int ring_size = BIT(ring->order); - int sent = 0; - int bytes_compl = 0; - int n = 0; - - DBG("%s: processing TX ring\n", ag->dev->name); - - while (ring->dirty + n != ring->curr) { - unsigned int i = (ring->dirty + n) & ring_mask; - struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i); - struct sk_buff *skb = ring->buf[i].skb; - - if (!flush && !ag71xx_desc_empty(desc)) { - if (pdata->is_ar724x && - ag71xx_check_dma_stuck(ag)) { - schedule_delayed_work(&ag->restart_work, HZ / 2); - dma_stuck = true; - } - break; - } - - if (flush) - desc->ctrl |= DESC_EMPTY; - - n++; - if (!skb) - continue; - - dev_kfree_skb_any(skb); - ring->buf[i].skb = NULL; - - bytes_compl += ring->buf[i].len; - - sent++; - ring->dirty += n; - - while (n > 0) { - ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS); - n--; - } - } - - DBG("%s: %d packets sent out\n", ag->dev->name, sent); - - if (!sent) - return 0; - - ag->dev->stats.tx_bytes += bytes_compl; - ag->dev->stats.tx_packets += sent; - - netdev_completed_queue(ag->dev, sent, bytes_compl); - if ((ring->curr - ring->dirty) < (ring_size * 3) / 4) - netif_wake_queue(ag->dev); - - if (!dma_stuck) - cancel_delayed_work(&ag->restart_work); - - return sent; -} - -static int ag71xx_rx_packets(struct ag71xx *ag, int limit) -{ - struct net_device *dev = ag->dev; - struct ag71xx_ring *ring = &ag->rx_ring; - int offset = ag71xx_buffer_offset(ag); - unsigned int pktlen_mask = ag->desc_pktlen_mask; - int ring_mask = BIT(ring->order) - 1; - int ring_size = BIT(ring->order); - struct sk_buff_head queue; - struct sk_buff *skb; - int done = 0; - - DBG("%s: rx packets, limit=%d, curr=%u, dirty=%u\n", - dev->name, limit, ring->curr, ring->dirty); - - skb_queue_head_init(&queue); - - while (done < limit) { - unsigned int i = ring->curr & ring_mask; - struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i); - int pktlen; - int err = 0; - - if (ag71xx_desc_empty(desc)) - break; - - if ((ring->dirty + ring_size) == ring->curr) { - ag71xx_assert(0); - break; - } - - ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR); - - pktlen = desc->ctrl & pktlen_mask; - pktlen -= ETH_FCS_LEN; - - dma_unmap_single(&ag->pdev->dev, ring->buf[i].dma_addr, - ag->rx_buf_size, DMA_FROM_DEVICE); - - dev->stats.rx_packets++; - dev->stats.rx_bytes += pktlen; - - skb = build_skb(ring->buf[i].rx_buf, ag71xx_buffer_size(ag)); - if (!skb) { - skb_free_frag(ring->buf[i].rx_buf); - goto next; - } - - skb_reserve(skb, offset); - skb_put(skb, pktlen); - - if (ag71xx_has_ar8216(ag)) - err = ag71xx_remove_ar8216_header(ag, skb, pktlen); - - if (err) { - dev->stats.rx_dropped++; - kfree_skb(skb); - } else { - skb->dev = dev; - skb->ip_summed = CHECKSUM_NONE; - __skb_queue_tail(&queue, skb); - } - -next: - ring->buf[i].rx_buf = NULL; - done++; - - ring->curr++; - } - - ag71xx_ring_rx_refill(ag); - - while ((skb = __skb_dequeue(&queue)) != NULL) { - skb->protocol = eth_type_trans(skb, dev); - netif_receive_skb(skb); - } - - DBG("%s: rx finish, curr=%u, dirty=%u, done=%d\n", - dev->name, ring->curr, ring->dirty, done); - - return done; -} - -static int ag71xx_poll(struct napi_struct *napi, int limit) -{ - struct ag71xx *ag = container_of(napi, struct ag71xx, napi); - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - struct net_device *dev = ag->dev; - struct ag71xx_ring *rx_ring = &ag->rx_ring; - int rx_ring_size = BIT(rx_ring->order); - unsigned long flags; - u32 status; - int tx_done; - int rx_done; - - pdata->ddr_flush(); - tx_done = ag71xx_tx_packets(ag, false); - - DBG("%s: processing RX ring\n", dev->name); - rx_done = ag71xx_rx_packets(ag, limit); - - ag71xx_debugfs_update_napi_stats(ag, rx_done, tx_done); - - if (rx_ring->buf[rx_ring->dirty % rx_ring_size].rx_buf == NULL) - goto oom; - - status = ag71xx_rr(ag, AG71XX_REG_RX_STATUS); - if (unlikely(status & RX_STATUS_OF)) { - ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_OF); - dev->stats.rx_fifo_errors++; - - /* restart RX */ - ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE); - } - - if (rx_done < limit) { - if (status & RX_STATUS_PR) - goto more; - - status = ag71xx_rr(ag, AG71XX_REG_TX_STATUS); - if (status & TX_STATUS_PS) - goto more; - - DBG("%s: disable polling mode, rx=%d, tx=%d,limit=%d\n", - dev->name, rx_done, tx_done, limit); - - napi_complete(napi); - - /* enable interrupts */ - spin_lock_irqsave(&ag->lock, flags); - ag71xx_int_enable(ag, AG71XX_INT_POLL); - spin_unlock_irqrestore(&ag->lock, flags); - return rx_done; - } - -more: - DBG("%s: stay in polling mode, rx=%d, tx=%d, limit=%d\n", - dev->name, rx_done, tx_done, limit); - return limit; - -oom: - if (netif_msg_rx_err(ag)) - pr_info("%s: out of memory\n", dev->name); - - mod_timer(&ag->oom_timer, jiffies + AG71XX_OOM_REFILL); - napi_complete(napi); - return 0; -} - -static irqreturn_t ag71xx_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct ag71xx *ag = netdev_priv(dev); - u32 status; - - status = ag71xx_rr(ag, AG71XX_REG_INT_STATUS); - ag71xx_dump_intr(ag, "raw", status); - - if (unlikely(!status)) - return IRQ_NONE; - - if (unlikely(status & AG71XX_INT_ERR)) { - if (status & AG71XX_INT_TX_BE) { - ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE); - dev_err(&dev->dev, "TX BUS error\n"); - } - if (status & AG71XX_INT_RX_BE) { - ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE); - dev_err(&dev->dev, "RX BUS error\n"); - } - } - - if (likely(status & AG71XX_INT_POLL)) { - ag71xx_int_disable(ag, AG71XX_INT_POLL); - DBG("%s: enable polling mode\n", dev->name); - napi_schedule(&ag->napi); - } - - ag71xx_debugfs_update_int_stats(ag, status); - - return IRQ_HANDLED; -} - -#ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling 'interrupt' - used by things like netconsole to send skbs - * without having to re-enable interrupts. It's not called while - * the interrupt routine is executing. - */ -static void ag71xx_netpoll(struct net_device *dev) -{ - disable_irq(dev->irq); - ag71xx_interrupt(dev->irq, dev); - enable_irq(dev->irq); -} -#endif - -static int ag71xx_change_mtu(struct net_device *dev, int new_mtu) -{ - struct ag71xx *ag = netdev_priv(dev); - unsigned int max_frame_len; - - max_frame_len = ag71xx_max_frame_len(new_mtu); - if (new_mtu < 68 || max_frame_len > ag->max_frame_len) - return -EINVAL; - - if (netif_running(dev)) - return -EBUSY; - - dev->mtu = new_mtu; - ag71xx_wr(ag, AG71XX_REG_MAC_MFL, - ag71xx_max_frame_len(dev->mtu)); - - return 0; -} - -static const struct net_device_ops ag71xx_netdev_ops = { - .ndo_open = ag71xx_open, - .ndo_stop = ag71xx_stop, - .ndo_start_xmit = ag71xx_hard_start_xmit, - .ndo_do_ioctl = ag71xx_do_ioctl, - .ndo_tx_timeout = ag71xx_tx_timeout, - .ndo_change_mtu = ag71xx_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ag71xx_netpoll, -#endif -}; - -static int ag71xx_probe(struct platform_device *pdev) -{ - struct net_device *dev; - struct resource *res; - struct ag71xx *ag; - struct ag71xx_platform_data *pdata; - int tx_size, err; - - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "no platform data specified\n"); - return -ENXIO; - - } - - if (pdata->mii_bus_dev == NULL && pdata->phy_mask) { - dev_err(&pdev->dev, "no MII bus device specified\n"); - return -EINVAL; - } - - dev = devm_alloc_etherdev(&pdev->dev, sizeof(*ag)); - if (!dev) - return -ENOMEM; - - if (!pdata->max_frame_len || !pdata->desc_pktlen_mask) - return -EINVAL; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -EINVAL; - - SET_NETDEV_DEV(dev, &pdev->dev); - - ag = netdev_priv(dev); - ag->pdev = pdev; - ag->dev = dev; - ag->msg_enable = netif_msg_init(ag71xx_msg_level, - AG71XX_DEFAULT_MSG_ENABLE); - spin_lock_init(&ag->lock); - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac_base"); - if (!res) { - dev_err(&pdev->dev, "no mac_base resource found\n"); - return -ENXIO; - } - - ag->mac_base = devm_ioremap_nocache(&pdev->dev, res->start, - res->end - res->start + 1); - if (!ag->mac_base) - return -ENOMEM; - - dev->irq = platform_get_irq(pdev, 0); - err = devm_request_irq(&pdev->dev, dev->irq, ag71xx_interrupt, - 0x0, dev_name(&pdev->dev), dev); - if (err) { - dev_err(&pdev->dev, "unable to request IRQ %d\n", dev->irq); - return err; - } - - dev->base_addr = (unsigned long)ag->mac_base; - dev->netdev_ops = &ag71xx_netdev_ops; - dev->ethtool_ops = &ag71xx_ethtool_ops; - - INIT_DELAYED_WORK(&ag->restart_work, ag71xx_restart_work_func); - - init_timer(&ag->oom_timer); - ag->oom_timer.data = (unsigned long) dev; - ag->oom_timer.function = ag71xx_oom_timer_handler; - - tx_size = AG71XX_TX_RING_SIZE_DEFAULT; - ag->rx_ring.order = ag71xx_ring_size_order(AG71XX_RX_RING_SIZE_DEFAULT); - - ag->max_frame_len = pdata->max_frame_len; - ag->desc_pktlen_mask = pdata->desc_pktlen_mask; - - if (!pdata->is_ar724x && !pdata->is_ar91xx) { - ag->tx_ring.desc_split = AG71XX_TX_RING_SPLIT; - tx_size *= AG71XX_TX_RING_DS_PER_PKT; - } - ag->tx_ring.order = ag71xx_ring_size_order(tx_size); - - ag->stop_desc = dmam_alloc_coherent(&pdev->dev, - sizeof(struct ag71xx_desc), - &ag->stop_desc_dma, GFP_KERNEL); - - if (!ag->stop_desc) - return -ENOMEM; - - ag->stop_desc->data = 0; - ag->stop_desc->ctrl = 0; - ag->stop_desc->next = (u32) ag->stop_desc_dma; - - memcpy(dev->dev_addr, pdata->mac_addr, ETH_ALEN); - - netif_napi_add(dev, &ag->napi, ag71xx_poll, AG71XX_NAPI_WEIGHT); - - ag71xx_dump_regs(ag); - - ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, 0); - - ag71xx_hw_init(ag); - - ag71xx_dump_regs(ag); - - err = ag71xx_phy_connect(ag); - if (err) - return err; - - err = ag71xx_debugfs_init(ag); - if (err) - goto err_phy_disconnect; - - platform_set_drvdata(pdev, dev); - - err = register_netdev(dev); - if (err) { - dev_err(&pdev->dev, "unable to register net device\n"); - platform_set_drvdata(pdev, NULL); - ag71xx_debugfs_exit(ag); - goto err_phy_disconnect; - } - - pr_info("%s: Atheros AG71xx at 0x%08lx, irq %d, mode: %s\n", - dev->name, (unsigned long) ag->mac_base, dev->irq, - phy_modes(pdata->phy_if_mode)); - - return 0; - -err_phy_disconnect: - ag71xx_phy_disconnect(ag); - return err; -} - -static int ag71xx_remove(struct platform_device *pdev) -{ - struct net_device *dev = platform_get_drvdata(pdev); - struct ag71xx *ag; - - if (!dev) - return 0; - - ag = netdev_priv(dev); - ag71xx_debugfs_exit(ag); - ag71xx_phy_disconnect(ag); - unregister_netdev(dev); - platform_set_drvdata(pdev, NULL); - return 0; -} - -static struct platform_driver ag71xx_driver = { - .probe = ag71xx_probe, - .remove = ag71xx_remove, - .driver = { - .name = AG71XX_DRV_NAME, - } -}; - -static int __init ag71xx_module_init(void) -{ - int ret; - - ret = ag71xx_debugfs_root_init(); - if (ret) - goto err_out; - - ret = ag71xx_mdio_driver_init(); - if (ret) - goto err_debugfs_exit; - - ret = platform_driver_register(&ag71xx_driver); - if (ret) - goto err_mdio_exit; - - return 0; - -err_mdio_exit: - ag71xx_mdio_driver_exit(); -err_debugfs_exit: - ag71xx_debugfs_root_exit(); -err_out: - return ret; -} - -static void __exit ag71xx_module_exit(void) -{ - platform_driver_unregister(&ag71xx_driver); - ag71xx_mdio_driver_exit(); - ag71xx_debugfs_root_exit(); -} - -module_init(ag71xx_module_init); -module_exit(ag71xx_module_exit); - -MODULE_VERSION(AG71XX_DRV_VERSION); -MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); -MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:" AG71XX_DRV_NAME); diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c deleted file mode 100644 index cf41aa8a3f..0000000000 --- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c +++ /dev/null @@ -1,320 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "ag71xx.h" - -#define AG71XX_MDIO_RETRY 1000 -#define AG71XX_MDIO_DELAY 5 - -static inline void ag71xx_mdio_wr(struct ag71xx_mdio *am, unsigned reg, - u32 value) -{ - void __iomem *r; - - r = am->mdio_base + reg; - __raw_writel(value, r); - - /* flush write */ - (void) __raw_readl(r); -} - -static inline u32 ag71xx_mdio_rr(struct ag71xx_mdio *am, unsigned reg) -{ - return __raw_readl(am->mdio_base + reg); -} - -static void ag71xx_mdio_dump_regs(struct ag71xx_mdio *am) -{ - DBG("%s: mii_cfg=%08x, mii_cmd=%08x, mii_addr=%08x\n", - am->mii_bus->name, - ag71xx_mdio_rr(am, AG71XX_REG_MII_CFG), - ag71xx_mdio_rr(am, AG71XX_REG_MII_CMD), - ag71xx_mdio_rr(am, AG71XX_REG_MII_ADDR)); - DBG("%s: mii_ctrl=%08x, mii_status=%08x, mii_ind=%08x\n", - am->mii_bus->name, - ag71xx_mdio_rr(am, AG71XX_REG_MII_CTRL), - ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS), - ag71xx_mdio_rr(am, AG71XX_REG_MII_IND)); -} - -static int ag71xx_mdio_wait_busy(struct ag71xx_mdio *am) -{ - int i; - - for (i = 0; i < AG71XX_MDIO_RETRY; i++) { - u32 busy; - - udelay(AG71XX_MDIO_DELAY); - - busy = ag71xx_mdio_rr(am, AG71XX_REG_MII_IND); - if (!busy) - return 0; - - udelay(AG71XX_MDIO_DELAY); - } - - pr_err("%s: MDIO operation timed out\n", am->mii_bus->name); - - return -ETIMEDOUT; -} - -int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg) -{ - int err; - int ret; - - err = ag71xx_mdio_wait_busy(am); - if (err) - return 0xffff; - - ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE); - ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR, - ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff)); - ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_READ); - - err = ag71xx_mdio_wait_busy(am); - if (err) - return 0xffff; - - ret = ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS) & 0xffff; - ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE); - - DBG("mii_read: addr=%04x, reg=%04x, value=%04x\n", addr, reg, ret); - - return ret; -} - -void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val) -{ - DBG("mii_write: addr=%04x, reg=%04x, value=%04x\n", addr, reg, val); - - ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR, - ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff)); - ag71xx_mdio_wr(am, AG71XX_REG_MII_CTRL, val); - - ag71xx_mdio_wait_busy(am); -} - -static const u32 ar71xx_mdio_div_table[] = { - 4, 4, 6, 8, 10, 14, 20, 28, -}; - -static const u32 ar7240_mdio_div_table[] = { - 2, 2, 4, 6, 8, 12, 18, 26, 32, 40, 48, 56, 62, 70, 78, 96, -}; - -static const u32 ar933x_mdio_div_table[] = { - 4, 4, 6, 8, 10, 14, 20, 28, 34, 42, 50, 58, 66, 74, 82, 98, -}; - -static int ag71xx_mdio_get_divider(struct ag71xx_mdio *am, u32 *div) -{ - unsigned long ref_clock, mdio_clock; - const u32 *table; - int ndivs; - int i; - - ref_clock = am->pdata->ref_clock; - mdio_clock = am->pdata->mdio_clock; - - if (!ref_clock || !mdio_clock) - return -EINVAL; - - if (am->pdata->is_ar9330 || am->pdata->is_ar934x) { - table = ar933x_mdio_div_table; - ndivs = ARRAY_SIZE(ar933x_mdio_div_table); - } else if (am->pdata->is_ar7240) { - table = ar7240_mdio_div_table; - ndivs = ARRAY_SIZE(ar7240_mdio_div_table); - } else { - table = ar71xx_mdio_div_table; - ndivs = ARRAY_SIZE(ar71xx_mdio_div_table); - } - - for (i = 0; i < ndivs; i++) { - unsigned long t; - - t = ref_clock / table[i]; - if (t <= mdio_clock) { - *div = i; - return 0; - } - } - - dev_err(&am->mii_bus->dev, "no divider found for %lu/%lu\n", - ref_clock, mdio_clock); - return -ENOENT; -} - -static int ag71xx_mdio_reset(struct mii_bus *bus) -{ - struct ag71xx_mdio *am = bus->priv; - u32 t; - int err; - - err = ag71xx_mdio_get_divider(am, &t); - if (err) { - /* fallback */ - if (am->pdata->is_ar7240) - t = MII_CFG_CLK_DIV_6; - else if (am->pdata->builtin_switch && !am->pdata->is_ar934x) - t = MII_CFG_CLK_DIV_10; - else if (!am->pdata->builtin_switch && am->pdata->is_ar934x) - t = MII_CFG_CLK_DIV_58; - else - t = MII_CFG_CLK_DIV_28; - } - - ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t | MII_CFG_RESET); - udelay(100); - - ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t); - udelay(100); - - if (am->pdata->reset) - am->pdata->reset(bus); - - return 0; -} - -static int ag71xx_mdio_read(struct mii_bus *bus, int addr, int reg) -{ - struct ag71xx_mdio *am = bus->priv; - - if (am->pdata->builtin_switch) - return ar7240sw_phy_read(bus, addr, reg); - else - return ag71xx_mdio_mii_read(am, addr, reg); -} - -static int ag71xx_mdio_write(struct mii_bus *bus, int addr, int reg, u16 val) -{ - struct ag71xx_mdio *am = bus->priv; - - if (am->pdata->builtin_switch) - ar7240sw_phy_write(bus, addr, reg, val); - else - ag71xx_mdio_mii_write(am, addr, reg, val); - return 0; -} - -static int ag71xx_mdio_probe(struct platform_device *pdev) -{ - struct ag71xx_mdio_platform_data *pdata; - struct ag71xx_mdio *am; - struct resource *res; - int i; - int err; - - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "no platform data specified\n"); - return -EINVAL; - } - - am = kzalloc(sizeof(*am), GFP_KERNEL); - if (!am) { - err = -ENOMEM; - goto err_out; - } - - am->pdata = pdata; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "no iomem resource found\n"); - err = -ENXIO; - goto err_free_mdio; - } - - am->mdio_base = ioremap_nocache(res->start, res->end - res->start + 1); - if (!am->mdio_base) { - dev_err(&pdev->dev, "unable to ioremap registers\n"); - err = -ENOMEM; - goto err_free_mdio; - } - - am->mii_bus = mdiobus_alloc(); - if (am->mii_bus == NULL) { - err = -ENOMEM; - goto err_iounmap; - } - - am->mii_bus->name = "ag71xx_mdio"; - am->mii_bus->read = ag71xx_mdio_read; - am->mii_bus->write = ag71xx_mdio_write; - am->mii_bus->reset = ag71xx_mdio_reset; -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) - am->mii_bus->irq = am->mii_irq; -#endif - am->mii_bus->priv = am; - am->mii_bus->parent = &pdev->dev; - snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev)); - am->mii_bus->phy_mask = pdata->phy_mask; - - for (i = 0; i < PHY_MAX_ADDR; i++) - am->mii_bus->irq[i] = PHY_POLL; - - ag71xx_mdio_wr(am, AG71XX_REG_MAC_CFG1, 0); - - err = mdiobus_register(am->mii_bus); - if (err) - goto err_free_bus; - - ag71xx_mdio_dump_regs(am); - - platform_set_drvdata(pdev, am); - return 0; - -err_free_bus: - mdiobus_free(am->mii_bus); -err_iounmap: - iounmap(am->mdio_base); -err_free_mdio: - kfree(am); -err_out: - return err; -} - -static int ag71xx_mdio_remove(struct platform_device *pdev) -{ - struct ag71xx_mdio *am = platform_get_drvdata(pdev); - - if (am) { - mdiobus_unregister(am->mii_bus); - mdiobus_free(am->mii_bus); - iounmap(am->mdio_base); - kfree(am); - platform_set_drvdata(pdev, NULL); - } - - return 0; -} - -static struct platform_driver ag71xx_mdio_driver = { - .probe = ag71xx_mdio_probe, - .remove = ag71xx_mdio_remove, - .driver = { - .name = "ag71xx-mdio", - } -}; - -int __init ag71xx_mdio_driver_init(void) -{ - return platform_driver_register(&ag71xx_mdio_driver); -} - -void ag71xx_mdio_driver_exit(void) -{ - platform_driver_unregister(&ag71xx_mdio_driver); -} diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c deleted file mode 100644 index 336143f753..0000000000 --- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c +++ /dev/null @@ -1,261 +0,0 @@ -/* - * Atheros AR71xx built-in ethernet mac driver - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Based on Atheros' AG7100 driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "ag71xx.h" - -static void ag71xx_phy_link_adjust(struct net_device *dev) -{ - struct ag71xx *ag = netdev_priv(dev); - struct phy_device *phydev = ag->phy_dev; - unsigned long flags; - int status_change = 0; - - spin_lock_irqsave(&ag->lock, flags); - - if (phydev->link) { - if (ag->duplex != phydev->duplex - || ag->speed != phydev->speed) { - status_change = 1; - } - } - - if (phydev->link != ag->link) - status_change = 1; - - ag->link = phydev->link; - ag->duplex = phydev->duplex; - ag->speed = phydev->speed; - - if (status_change) - ag71xx_link_adjust(ag); - - spin_unlock_irqrestore(&ag->lock, flags); -} - -void ag71xx_phy_start(struct ag71xx *ag) -{ - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - - if (ag->phy_dev) { - phy_start(ag->phy_dev); - } else if (pdata->mii_bus_dev && pdata->switch_data) { - ag71xx_ar7240_start(ag); - } else { - ag->link = 1; - ag71xx_link_adjust(ag); - } -} - -void ag71xx_phy_stop(struct ag71xx *ag) -{ - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - unsigned long flags; - - if (ag->phy_dev) - phy_stop(ag->phy_dev); - else if (pdata->mii_bus_dev && pdata->switch_data) - ag71xx_ar7240_stop(ag); - - spin_lock_irqsave(&ag->lock, flags); - if (ag->link) { - ag->link = 0; - ag71xx_link_adjust(ag); - } - spin_unlock_irqrestore(&ag->lock, flags); -} - -static int ag71xx_phy_connect_fixed(struct ag71xx *ag) -{ - struct device *dev = &ag->pdev->dev; - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - int ret = 0; - - /* use fixed settings */ - switch (pdata->speed) { - case SPEED_10: - case SPEED_100: - case SPEED_1000: - break; - default: - dev_err(dev, "invalid speed specified\n"); - ret = -EINVAL; - break; - } - - dev_dbg(dev, "using fixed link parameters\n"); - - ag->duplex = pdata->duplex; - ag->speed = pdata->speed; - - return ret; -} - -static int ag71xx_phy_connect_multi(struct ag71xx *ag) -{ - struct device *dev = &ag->pdev->dev; - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - struct phy_device *phydev = NULL; - int phy_addr; - int ret = 0; - - for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { - if (!(pdata->phy_mask & (1 << phy_addr))) - continue; - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) - if (ag->mii_bus->phy_map[phy_addr] == NULL) - continue; - - DBG("%s: PHY found at %s, uid=%08x\n", - dev_name(dev), - dev_name(&ag->mii_bus->phy_map[phy_addr]->dev), - ag->mii_bus->phy_map[phy_addr]->phy_id); - - if (phydev == NULL) - phydev = ag->mii_bus->phy_map[phy_addr]; -#else - if (ag->mii_bus->mdio_map[phy_addr] == NULL) - continue; - - DBG("%s: PHY found at %s, uid=%08x\n", - dev_name(dev), - dev_name(&ag->mii_bus->mdio_map[phy_addr]->dev), - (phydev) ? phydev->phy_id : 0); - - if (phydev == NULL) - phydev = mdiobus_get_phy(ag->mii_bus, phy_addr); -#endif - } - - if (!phydev) { - dev_err(dev, "no PHY found with phy_mask=%08x\n", - pdata->phy_mask); - return -ENODEV; - } - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) - ag->phy_dev = phy_connect(ag->dev, dev_name(&phydev->dev), -#else - ag->phy_dev = phy_connect(ag->dev, phydev_name(phydev), -#endif - &ag71xx_phy_link_adjust, - pdata->phy_if_mode); - - if (IS_ERR(ag->phy_dev)) { - dev_err(dev, "could not connect to PHY at %s\n", -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) - dev_name(&phydev->dev)); -#else - phydev_name(phydev)); -#endif - return PTR_ERR(ag->phy_dev); - } - - /* mask with MAC supported features */ - if (pdata->has_gbit) - phydev->supported &= PHY_GBIT_FEATURES; - else - phydev->supported &= PHY_BASIC_FEATURES; - - phydev->advertising = phydev->supported; - - dev_info(dev, "connected to PHY at %s [uid=%08x, driver=%s]\n", -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) - dev_name(&phydev->dev), -#else - phydev_name(phydev), -#endif - phydev->phy_id, phydev->drv->name); - - ag->link = 0; - ag->speed = 0; - ag->duplex = -1; - - return ret; -} - -static int dev_is_class(struct device *dev, void *class) -{ - if (dev->class != NULL && !strcmp(dev->class->name, class)) - return 1; - - return 0; -} - -static struct device *dev_find_class(struct device *parent, char *class) -{ - if (dev_is_class(parent, class)) { - get_device(parent); - return parent; - } - - return device_find_child(parent, class, dev_is_class); -} - -static struct mii_bus *dev_to_mii_bus(struct device *dev) -{ - struct device *d; - - d = dev_find_class(dev, "mdio_bus"); - if (d != NULL) { - struct mii_bus *bus; - - bus = to_mii_bus(d); - put_device(d); - - return bus; - } - - return NULL; -} - -int ag71xx_phy_connect(struct ag71xx *ag) -{ - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - - if (pdata->mii_bus_dev == NULL || - pdata->mii_bus_dev->bus == NULL ) - return ag71xx_phy_connect_fixed(ag); - - ag->mii_bus = dev_to_mii_bus(pdata->mii_bus_dev); - if (ag->mii_bus == NULL) { - dev_err(&ag->pdev->dev, "unable to find MII bus on device '%s'\n", - dev_name(pdata->mii_bus_dev)); - return -ENODEV; - } - - /* Reset the mdio bus explicitly */ - if (ag->mii_bus->reset) { - mutex_lock(&ag->mii_bus->mdio_lock); - ag->mii_bus->reset(ag->mii_bus); - mutex_unlock(&ag->mii_bus->mdio_lock); - } - - if (pdata->switch_data) - return ag71xx_ar7240_init(ag); - - if (pdata->phy_mask) - return ag71xx_phy_connect_multi(ag); - - return ag71xx_phy_connect_fixed(ag); -} - -void ag71xx_phy_disconnect(struct ag71xx *ag) -{ - struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - - if (pdata->switch_data) - ag71xx_ar7240_cleanup(ag); - else if (ag->phy_dev) - phy_disconnect(ag->phy_dev); -} diff --git a/target/linux/ar71xx/files/drivers/spi/spi-rb4xx-cpld.c b/target/linux/ar71xx/files/drivers/spi/spi-rb4xx-cpld.c deleted file mode 100644 index 18af83b67c..0000000000 --- a/target/linux/ar71xx/files/drivers/spi/spi-rb4xx-cpld.c +++ /dev/null @@ -1,347 +0,0 @@ -/* - * SPI driver for the CPLD chip on the Mikrotik RB4xx boards - * - * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> - * - * This file was based on the patches for Linux 2.6.27.39 published by - * MikroTik for their RouterBoard 4xx series devices. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/bitops.h> -#include <linux/spi/spi.h> -#include <linux/gpio.h> -#include <linux/slab.h> -#include <linux/version.h> - -#include <asm/mach-ath79/rb4xx_cpld.h> - -#define DRV_NAME "spi-rb4xx-cpld" -#define DRV_DESC "RB4xx CPLD driver" -#define DRV_VERSION "0.1.0" - -#define CPLD_CMD_WRITE_NAND 0x08 /* send cmd, n x send data, send indle */ -#define CPLD_CMD_WRITE_CFG 0x09 /* send cmd, n x send cfg */ -#define CPLD_CMD_READ_NAND 0x0a /* send cmd, send idle, n x read data */ -#define CPLD_CMD_READ_FAST 0x0b /* send cmd, 4 x idle, n x read data */ -#define CPLD_CMD_LED5_ON 0x0c /* send cmd */ -#define CPLD_CMD_LED5_OFF 0x0d /* send cmd */ - -struct rb4xx_cpld { - struct spi_device *spi; - struct mutex lock; - struct gpio_chip chip; - unsigned int config; -}; - -static struct rb4xx_cpld *rb4xx_cpld; - -static inline struct rb4xx_cpld *gpio_to_cpld(struct gpio_chip *chip) -{ - return container_of(chip, struct rb4xx_cpld, chip); -} - -static int rb4xx_cpld_write_cmd(struct rb4xx_cpld *cpld, unsigned char cmd) -{ - struct spi_transfer t[1]; - struct spi_message m; - unsigned char tx_buf[1]; - int err; - - spi_message_init(&m); - memset(&t, 0, sizeof(t)); - - t[0].tx_buf = tx_buf; - t[0].len = sizeof(tx_buf); - spi_message_add_tail(&t[0], &m); - - tx_buf[0] = cmd; - - err = spi_sync(cpld->spi, &m); - return err; -} - -static int rb4xx_cpld_write_cfg(struct rb4xx_cpld *cpld, unsigned char config) -{ - struct spi_transfer t[1]; - struct spi_message m; - unsigned char cmd[2]; - int err; - - spi_message_init(&m); - memset(&t, 0, sizeof(t)); - - t[0].tx_buf = cmd; - t[0].len = sizeof(cmd); - spi_message_add_tail(&t[0], &m); - - cmd[0] = CPLD_CMD_WRITE_CFG; - cmd[1] = config; - - err = spi_sync(cpld->spi, &m); - return err; -} - -static int __rb4xx_cpld_change_cfg(struct rb4xx_cpld *cpld, unsigned mask, - unsigned value) -{ - unsigned int config; - int err; - - config = cpld->config & ~mask; - config |= value; - - if ((cpld->config ^ config) & 0xff) { - err = rb4xx_cpld_write_cfg(cpld, config); - if (err) - return err; - } - - if ((cpld->config ^ config) & CPLD_CFG_nLED5) { - err = rb4xx_cpld_write_cmd(cpld, (value) ? CPLD_CMD_LED5_ON : - CPLD_CMD_LED5_OFF); - if (err) - return err; - } - - cpld->config = config; - return 0; -} - -int rb4xx_cpld_change_cfg(unsigned mask, unsigned value) -{ - int ret; - - if (rb4xx_cpld == NULL) - return -ENODEV; - - mutex_lock(&rb4xx_cpld->lock); - ret = __rb4xx_cpld_change_cfg(rb4xx_cpld, mask, value); - mutex_unlock(&rb4xx_cpld->lock); - - return ret; -} -EXPORT_SYMBOL_GPL(rb4xx_cpld_change_cfg); - -int rb4xx_cpld_read(unsigned char *rx_buf, unsigned count) -{ - static const unsigned char cmd[2] = { CPLD_CMD_READ_NAND, 0 }; - struct spi_transfer t[2] = { - { - .tx_buf = &cmd, - .len = 2, - }, { - .rx_buf = rx_buf, - .len = count, - }, - }; - struct spi_message m; - - if (rb4xx_cpld == NULL) - return -ENODEV; - - spi_message_init(&m); - spi_message_add_tail(&t[0], &m); - spi_message_add_tail(&t[1], &m); - return spi_sync(rb4xx_cpld->spi, &m); -} -EXPORT_SYMBOL_GPL(rb4xx_cpld_read); - -int rb4xx_cpld_write(const unsigned char *buf, unsigned count) -{ - static const unsigned char cmd = CPLD_CMD_WRITE_NAND; - struct spi_transfer t[3] = { - { - .tx_buf = &cmd, - .len = 1, - }, { - .tx_buf = buf, - .len = count, - .tx_nbits = SPI_NBITS_DUAL, - }, { - .len = 1, - .tx_nbits = SPI_NBITS_DUAL, - }, - }; - struct spi_message m; - - if (rb4xx_cpld == NULL) - return -ENODEV; - - spi_message_init(&m); - spi_message_add_tail(&t[0], &m); - spi_message_add_tail(&t[1], &m); - spi_message_add_tail(&t[2], &m); - return spi_sync(rb4xx_cpld->spi, &m); -} -EXPORT_SYMBOL_GPL(rb4xx_cpld_write); - -static int rb4xx_cpld_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct rb4xx_cpld *cpld = gpio_to_cpld(chip); - int ret; - - mutex_lock(&cpld->lock); - ret = (cpld->config >> offset) & 1; - mutex_unlock(&cpld->lock); - - return ret; -} - -static void rb4xx_cpld_gpio_set(struct gpio_chip *chip, unsigned offset, - int value) -{ - struct rb4xx_cpld *cpld = gpio_to_cpld(chip); - - mutex_lock(&cpld->lock); - __rb4xx_cpld_change_cfg(cpld, (1 << offset), !!value << offset); - mutex_unlock(&cpld->lock); -} - -static int rb4xx_cpld_gpio_direction_input(struct gpio_chip *chip, - unsigned offset) -{ - return -EOPNOTSUPP; -} - -static int rb4xx_cpld_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, - int value) -{ - struct rb4xx_cpld *cpld = gpio_to_cpld(chip); - int ret; - - mutex_lock(&cpld->lock); - ret = __rb4xx_cpld_change_cfg(cpld, (1 << offset), !!value << offset); - mutex_unlock(&cpld->lock); - - return ret; -} - -static int rb4xx_cpld_gpio_init(struct rb4xx_cpld *cpld, unsigned int base) -{ - int err; - - /* init config */ - cpld->config = CPLD_CFG_nLED1 | CPLD_CFG_nLED2 | CPLD_CFG_nLED3 | - CPLD_CFG_nLED4 | CPLD_CFG_nCE; - rb4xx_cpld_write_cfg(cpld, cpld->config); - - /* setup GPIO chip */ - cpld->chip.label = DRV_NAME; - - cpld->chip.get = rb4xx_cpld_gpio_get; - cpld->chip.set = rb4xx_cpld_gpio_set; - cpld->chip.direction_input = rb4xx_cpld_gpio_direction_input; - cpld->chip.direction_output = rb4xx_cpld_gpio_direction_output; - - cpld->chip.base = base; - cpld->chip.ngpio = CPLD_NUM_GPIOS; - cpld->chip.can_sleep = 1; -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) - cpld->chip.dev = &cpld->spi->dev; -#else - cpld->chip.parent = &cpld->spi->dev; -#endif - cpld->chip.owner = THIS_MODULE; - - err = gpiochip_add(&cpld->chip); - if (err) - dev_err(&cpld->spi->dev, "adding GPIO chip failed, err=%d\n", - err); - - return err; -} - -static int rb4xx_cpld_probe(struct spi_device *spi) -{ - struct rb4xx_cpld *cpld; - struct rb4xx_cpld_platform_data *pdata; - int err; - - pdata = spi->dev.platform_data; - if (!pdata) { - dev_dbg(&spi->dev, "no platform data\n"); - return -EINVAL; - } - - cpld = kzalloc(sizeof(*cpld), GFP_KERNEL); - if (!cpld) { - dev_err(&spi->dev, "no memory for private data\n"); - return -ENOMEM; - } - - mutex_init(&cpld->lock); - cpld->spi = spi_dev_get(spi); - dev_set_drvdata(&spi->dev, cpld); - - spi->mode = SPI_MODE_0 | SPI_TX_DUAL; - spi->bits_per_word = 8; - err = spi_setup(spi); - if (err) { - dev_err(&spi->dev, "spi_setup failed, err=%d\n", err); - goto err_drvdata; - } - - err = rb4xx_cpld_gpio_init(cpld, pdata->gpio_base); - if (err) - goto err_drvdata; - - rb4xx_cpld = cpld; - - return 0; - -err_drvdata: - dev_set_drvdata(&spi->dev, NULL); - kfree(cpld); - - return err; -} - -static int rb4xx_cpld_remove(struct spi_device *spi) -{ - struct rb4xx_cpld *cpld; - - rb4xx_cpld = NULL; - cpld = dev_get_drvdata(&spi->dev); - dev_set_drvdata(&spi->dev, NULL); - kfree(cpld); - - return 0; -} - -static struct spi_driver rb4xx_cpld_driver = { - .driver = { - .name = DRV_NAME, - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - .probe = rb4xx_cpld_probe, - .remove = rb4xx_cpld_remove, -}; - -static int __init rb4xx_cpld_init(void) -{ - return spi_register_driver(&rb4xx_cpld_driver); -} -module_init(rb4xx_cpld_init); - -static void __exit rb4xx_cpld_exit(void) -{ - spi_unregister_driver(&rb4xx_cpld_driver); -} -module_exit(rb4xx_cpld_exit); - -MODULE_DESCRIPTION(DRV_DESC); -MODULE_VERSION(DRV_VERSION); -MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); -MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ar71xx/files/drivers/spi/spi-rb4xx.c b/target/linux/ar71xx/files/drivers/spi/spi-rb4xx.c deleted file mode 100644 index 2d95e80495..0000000000 --- a/target/linux/ar71xx/files/drivers/spi/spi-rb4xx.c +++ /dev/null @@ -1,430 +0,0 @@ -/* - * SPI controller driver for the Mikrotik RB4xx boards - * - * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> - * - * This file was based on the patches for Linux 2.6.27.39 published by - * MikroTik for their RouterBoard 4xx series devices. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/spinlock.h> -#include <linux/workqueue.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#define DRV_NAME "rb4xx-spi" -#define DRV_DESC "Mikrotik RB4xx SPI controller driver" -#define DRV_VERSION "0.1.0" - -#define SPI_CTRL_FASTEST 0x40 -#define SPI_FLASH_HZ 33333334 -#define SPI_CPLD_HZ 33333334 - -#define CPLD_CMD_READ_FAST 0x0b - -#undef RB4XX_SPI_DEBUG - -struct rb4xx_spi { - void __iomem *base; - struct spi_master *master; - - unsigned spi_ctrl_flash; - unsigned spi_ctrl_fread; - - struct clk *ahb_clk; - unsigned long ahb_freq; - - spinlock_t lock; - struct list_head queue; - int busy:1; - int cs_wait; -}; - -static unsigned spi_clk_low = AR71XX_SPI_IOC_CS1; - -#ifdef RB4XX_SPI_DEBUG -static inline void do_spi_delay(void) -{ - ndelay(20000); -} -#else -static inline void do_spi_delay(void) { } -#endif - -static inline void do_spi_init(struct spi_device *spi) -{ - unsigned cs = AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1; - - if (!(spi->mode & SPI_CS_HIGH)) - cs ^= (spi->chip_select == 2) ? AR71XX_SPI_IOC_CS1 : - AR71XX_SPI_IOC_CS0; - - spi_clk_low = cs; -} - -static inline void do_spi_finish(void __iomem *base) -{ - do_spi_delay(); - __raw_writel(AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1, - base + AR71XX_SPI_REG_IOC); -} - -static inline void do_spi_clk(void __iomem *base, int bit) -{ - unsigned bval = spi_clk_low | ((bit & 1) ? AR71XX_SPI_IOC_DO : 0); - - do_spi_delay(); - __raw_writel(bval, base + AR71XX_SPI_REG_IOC); - do_spi_delay(); - __raw_writel(bval | AR71XX_SPI_IOC_CLK, base + AR71XX_SPI_REG_IOC); -} - -static void do_spi_byte(void __iomem *base, unsigned char byte) -{ - do_spi_clk(base, byte >> 7); - do_spi_clk(base, byte >> 6); - do_spi_clk(base, byte >> 5); - do_spi_clk(base, byte >> 4); - do_spi_clk(base, byte >> 3); - do_spi_clk(base, byte >> 2); - do_spi_clk(base, byte >> 1); - do_spi_clk(base, byte); - - pr_debug("spi_byte sent 0x%02x got 0x%02x\n", - (unsigned)byte, - (unsigned char)__raw_readl(base + AR71XX_SPI_REG_RDS)); -} - -static inline void do_spi_clk_fast(void __iomem *base, unsigned bit1, - unsigned bit2) -{ - unsigned bval = (spi_clk_low | - ((bit1 & 1) ? AR71XX_SPI_IOC_DO : 0) | - ((bit2 & 1) ? AR71XX_SPI_IOC_CS2 : 0)); - do_spi_delay(); - __raw_writel(bval, base + AR71XX_SPI_REG_IOC); - do_spi_delay(); - __raw_writel(bval | AR71XX_SPI_IOC_CLK, base + AR71XX_SPI_REG_IOC); -} - -static void do_spi_byte_fast(void __iomem *base, unsigned char byte) -{ - do_spi_clk_fast(base, byte >> 7, byte >> 6); - do_spi_clk_fast(base, byte >> 5, byte >> 4); - do_spi_clk_fast(base, byte >> 3, byte >> 2); - do_spi_clk_fast(base, byte >> 1, byte >> 0); - - pr_debug("spi_byte_fast sent 0x%02x got 0x%02x\n", - (unsigned)byte, - (unsigned char) __raw_readl(base + AR71XX_SPI_REG_RDS)); -} - -static int rb4xx_spi_txrx(void __iomem *base, struct spi_transfer *t) -{ - const unsigned char *tx_ptr = t->tx_buf; - unsigned char *rx_ptr = t->rx_buf; - unsigned i; - - pr_debug("spi_txrx len %u tx %u rx %u\n", - t->len, - (t->tx_buf ? 1 : 0), - (t->rx_buf ? 1 : 0)); - - for (i = 0; i < t->len; ++i) { - unsigned char sdata = tx_ptr ? tx_ptr[i] : 0; - - if (t->tx_nbits == SPI_NBITS_DUAL) - do_spi_byte_fast(base, sdata); - else - do_spi_byte(base, sdata); - - if (rx_ptr) - rx_ptr[i] = __raw_readl(base + AR71XX_SPI_REG_RDS) & 0xff; - } - - return i; -} - -static int rb4xx_spi_msg(struct rb4xx_spi *rbspi, struct spi_message *m) -{ - struct spi_transfer *t = NULL; - void __iomem *base = rbspi->base; - - m->status = 0; - if (list_empty(&m->transfers)) - return -1; - - __raw_writel(AR71XX_SPI_FS_GPIO, base + AR71XX_SPI_REG_FS); - __raw_writel(SPI_CTRL_FASTEST, base + AR71XX_SPI_REG_CTRL); - do_spi_init(m->spi); - - list_for_each_entry(t, &m->transfers, transfer_list) { - int len; - - len = rb4xx_spi_txrx(base, t); - if (len != t->len) { - m->status = -EMSGSIZE; - break; - } - m->actual_length += len; - - if (t->cs_change) { - if (list_is_last(&t->transfer_list, &m->transfers)) { - /* wait for continuation */ - return m->spi->chip_select; - } - do_spi_finish(base); - ndelay(100); - } - } - - do_spi_finish(base); - __raw_writel(rbspi->spi_ctrl_flash, base + AR71XX_SPI_REG_CTRL); - __raw_writel(0, base + AR71XX_SPI_REG_FS); - return -1; -} - -static void rb4xx_spi_process_queue_locked(struct rb4xx_spi *rbspi, - unsigned long *flags) -{ - int cs = rbspi->cs_wait; - - rbspi->busy = 1; - while (!list_empty(&rbspi->queue)) { - struct spi_message *m; - - list_for_each_entry(m, &rbspi->queue, queue) - if (cs < 0 || cs == m->spi->chip_select) - break; - - if (&m->queue == &rbspi->queue) - break; - - list_del_init(&m->queue); - spin_unlock_irqrestore(&rbspi->lock, *flags); - - cs = rb4xx_spi_msg(rbspi, m); - m->complete(m->context); - - spin_lock_irqsave(&rbspi->lock, *flags); - } - - rbspi->cs_wait = cs; - rbspi->busy = 0; - - if (cs >= 0) { - /* TODO: add timer to unlock cs after 1s inactivity */ - } -} - -static int rb4xx_spi_transfer(struct spi_device *spi, - struct spi_message *m) -{ - struct rb4xx_spi *rbspi = spi_master_get_devdata(spi->master); - unsigned long flags; - - m->actual_length = 0; - m->status = -EINPROGRESS; - - spin_lock_irqsave(&rbspi->lock, flags); - list_add_tail(&m->queue, &rbspi->queue); - if (rbspi->busy || - (rbspi->cs_wait >= 0 && rbspi->cs_wait != m->spi->chip_select)) { - /* job will be done later */ - spin_unlock_irqrestore(&rbspi->lock, flags); - return 0; - } - - /* process job in current context */ - rb4xx_spi_process_queue_locked(rbspi, &flags); - spin_unlock_irqrestore(&rbspi->lock, flags); - - return 0; -} - -static int rb4xx_spi_setup(struct spi_device *spi) -{ - struct rb4xx_spi *rbspi = spi_master_get_devdata(spi->master); - unsigned long flags; - - if (spi->mode & ~(SPI_CS_HIGH | SPI_TX_DUAL)) { - dev_err(&spi->dev, "mode %x not supported\n", - (unsigned) spi->mode); - return -EINVAL; - } - - if (spi->bits_per_word != 8 && spi->bits_per_word != 0) { - dev_err(&spi->dev, "bits_per_word %u not supported\n", - (unsigned) spi->bits_per_word); - return -EINVAL; - } - - spin_lock_irqsave(&rbspi->lock, flags); - if (rbspi->cs_wait == spi->chip_select && !rbspi->busy) { - rbspi->cs_wait = -1; - rb4xx_spi_process_queue_locked(rbspi, &flags); - } - spin_unlock_irqrestore(&rbspi->lock, flags); - - return 0; -} - -static unsigned get_spi_ctrl(struct rb4xx_spi *rbspi, unsigned hz_max, - const char *name) -{ - unsigned div; - - div = (rbspi->ahb_freq - 1) / (2 * hz_max); - - /* - * CPU has a bug at (div == 0) - first bit read is random - */ - if (div == 0) - ++div; - - if (name) { - unsigned ahb_khz = (rbspi->ahb_freq + 500) / 1000; - unsigned div_real = 2 * (div + 1); - pr_debug("rb4xx: %s SPI clock %u kHz (AHB %u kHz / %u)\n", - name, - ahb_khz / div_real, - ahb_khz, div_real); - } - - return SPI_CTRL_FASTEST + div; -} - -static int rb4xx_spi_probe(struct platform_device *pdev) -{ - struct spi_master *master; - struct rb4xx_spi *rbspi; - struct resource *r; - int err = 0; - - master = spi_alloc_master(&pdev->dev, sizeof(*rbspi)); - if (master == NULL) { - dev_err(&pdev->dev, "no memory for spi_master\n"); - err = -ENOMEM; - goto err_out; - } - - master->bus_num = 0; - master->num_chipselect = 3; - master->mode_bits = SPI_TX_DUAL; - master->setup = rb4xx_spi_setup; - master->transfer = rb4xx_spi_transfer; - - rbspi = spi_master_get_devdata(master); - - rbspi->ahb_clk = clk_get(&pdev->dev, "ahb"); - if (IS_ERR(rbspi->ahb_clk)) { - err = PTR_ERR(rbspi->ahb_clk); - goto err_put_master; - } - - err = clk_prepare_enable(rbspi->ahb_clk); - if (err) - goto err_clk_put; - - rbspi->ahb_freq = clk_get_rate(rbspi->ahb_clk); - if (!rbspi->ahb_freq) { - err = -EINVAL; - goto err_clk_disable; - } - - platform_set_drvdata(pdev, rbspi); - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (r == NULL) { - err = -ENOENT; - goto err_clk_disable; - } - - rbspi->base = ioremap(r->start, r->end - r->start + 1); - if (!rbspi->base) { - err = -ENXIO; - goto err_clk_disable; - } - - rbspi->master = master; - rbspi->spi_ctrl_flash = get_spi_ctrl(rbspi, SPI_FLASH_HZ, "FLASH"); - rbspi->spi_ctrl_fread = get_spi_ctrl(rbspi, SPI_CPLD_HZ, "CPLD"); - rbspi->cs_wait = -1; - - spin_lock_init(&rbspi->lock); - INIT_LIST_HEAD(&rbspi->queue); - - err = spi_register_master(master); - if (err) { - dev_err(&pdev->dev, "failed to register SPI master\n"); - goto err_iounmap; - } - - return 0; - -err_iounmap: - iounmap(rbspi->base); -err_clk_disable: - clk_disable_unprepare(rbspi->ahb_clk); -err_clk_put: - clk_put(rbspi->ahb_clk); -err_put_master: - platform_set_drvdata(pdev, NULL); - spi_master_put(master); -err_out: - return err; -} - -static int rb4xx_spi_remove(struct platform_device *pdev) -{ - struct rb4xx_spi *rbspi = platform_get_drvdata(pdev); - - iounmap(rbspi->base); - clk_disable_unprepare(rbspi->ahb_clk); - clk_put(rbspi->ahb_clk); - platform_set_drvdata(pdev, NULL); - spi_master_put(rbspi->master); - - return 0; -} - -static struct platform_driver rb4xx_spi_drv = { - .probe = rb4xx_spi_probe, - .remove = rb4xx_spi_remove, - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init rb4xx_spi_init(void) -{ - return platform_driver_register(&rb4xx_spi_drv); -} -subsys_initcall(rb4xx_spi_init); - -static void __exit rb4xx_spi_exit(void) -{ - platform_driver_unregister(&rb4xx_spi_drv); -} - -module_exit(rb4xx_spi_exit); - -MODULE_DESCRIPTION(DRV_DESC); -MODULE_VERSION(DRV_VERSION); -MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); -MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ar71xx/files/drivers/spi/spi-vsc7385.c b/target/linux/ar71xx/files/drivers/spi/spi-vsc7385.c deleted file mode 100644 index b712e71875..0000000000 --- a/target/linux/ar71xx/files/drivers/spi/spi-vsc7385.c +++ /dev/null @@ -1,621 +0,0 @@ -/* - * SPI driver for the Vitesse VSC7385 ethernet switch - * - * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> - * - * Parts of this file are based on Atheros' 2.6.15 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/bitops.h> -#include <linux/firmware.h> -#include <linux/spi/spi.h> -#include <linux/spi/vsc7385.h> - -#define DRV_NAME "spi-vsc7385" -#define DRV_DESC "Vitesse VSC7385 Gbit ethernet switch driver" -#define DRV_VERSION "0.1.0" - -#define VSC73XX_BLOCK_MAC 0x1 -#define VSC73XX_BLOCK_2 0x2 -#define VSC73XX_BLOCK_MII 0x3 -#define VSC73XX_BLOCK_4 0x4 -#define VSC73XX_BLOCK_5 0x5 -#define VSC73XX_BLOCK_SYSTEM 0x7 - -#define VSC73XX_SUBBLOCK_PORT_0 0 -#define VSC73XX_SUBBLOCK_PORT_1 1 -#define VSC73XX_SUBBLOCK_PORT_2 2 -#define VSC73XX_SUBBLOCK_PORT_3 3 -#define VSC73XX_SUBBLOCK_PORT_4 4 -#define VSC73XX_SUBBLOCK_PORT_MAC 6 - -/* MAC Block registers */ -#define VSC73XX_MAC_CFG 0x0 -#define VSC73XX_ADVPORTM 0x19 -#define VSC73XX_RXOCT 0x50 -#define VSC73XX_TXOCT 0x51 -#define VSC73XX_C_RX0 0x52 -#define VSC73XX_C_RX1 0x53 -#define VSC73XX_C_RX2 0x54 -#define VSC73XX_C_TX0 0x55 -#define VSC73XX_C_TX1 0x56 -#define VSC73XX_C_TX2 0x57 -#define VSC73XX_C_CFG 0x58 - -/* MAC_CFG register bits */ -#define VSC73XX_MAC_CFG_WEXC_DIS (1 << 31) -#define VSC73XX_MAC_CFG_PORT_RST (1 << 29) -#define VSC73XX_MAC_CFG_TX_EN (1 << 28) -#define VSC73XX_MAC_CFG_SEED_LOAD (1 << 27) -#define VSC73XX_MAC_CFG_FDX (1 << 18) -#define VSC73XX_MAC_CFG_GIGE (1 << 17) -#define VSC73XX_MAC_CFG_RX_EN (1 << 16) -#define VSC73XX_MAC_CFG_VLAN_DBLAWR (1 << 15) -#define VSC73XX_MAC_CFG_VLAN_AWR (1 << 14) -#define VSC73XX_MAC_CFG_100_BASE_T (1 << 13) -#define VSC73XX_MAC_CFG_TX_IPG(x) (((x) & 0x1f) << 6) -#define VSC73XX_MAC_CFG_MAC_RX_RST (1 << 5) -#define VSC73XX_MAC_CFG_MAC_TX_RST (1 << 4) -#define VSC73XX_MAC_CFG_BIT2 (1 << 2) -#define VSC73XX_MAC_CFG_CLK_SEL(x) ((x) & 0x3) - -/* ADVPORTM register bits */ -#define VSC73XX_ADVPORTM_IFG_PPM (1 << 7) -#define VSC73XX_ADVPORTM_EXC_COL_CONT (1 << 6) -#define VSC73XX_ADVPORTM_EXT_PORT (1 << 5) -#define VSC73XX_ADVPORTM_INV_GTX (1 << 4) -#define VSC73XX_ADVPORTM_ENA_GTX (1 << 3) -#define VSC73XX_ADVPORTM_DDR_MODE (1 << 2) -#define VSC73XX_ADVPORTM_IO_LOOPBACK (1 << 1) -#define VSC73XX_ADVPORTM_HOST_LOOPBACK (1 << 0) - -/* MII Block registers */ -#define VSC73XX_MII_STAT 0x0 -#define VSC73XX_MII_CMD 0x1 -#define VSC73XX_MII_DATA 0x2 - -/* System Block registers */ -#define VSC73XX_ICPU_SIPAD 0x01 -#define VSC73XX_ICPU_CLOCK_DELAY 0x05 -#define VSC73XX_ICPU_CTRL 0x10 -#define VSC73XX_ICPU_ADDR 0x11 -#define VSC73XX_ICPU_SRAM 0x12 -#define VSC73XX_ICPU_MBOX_VAL 0x15 -#define VSC73XX_ICPU_MBOX_SET 0x16 -#define VSC73XX_ICPU_MBOX_CLR 0x17 -#define VSC73XX_ICPU_CHIPID 0x18 -#define VSC73XX_ICPU_GPIO 0x34 - -#define VSC73XX_ICPU_CTRL_CLK_DIV (1 << 8) -#define VSC73XX_ICPU_CTRL_SRST_HOLD (1 << 7) -#define VSC73XX_ICPU_CTRL_BOOT_EN (1 << 3) -#define VSC73XX_ICPU_CTRL_EXT_ACC_EN (1 << 2) -#define VSC73XX_ICPU_CTRL_CLK_EN (1 << 1) -#define VSC73XX_ICPU_CTRL_SRST (1 << 0) - -#define VSC73XX_ICPU_CHIPID_ID_SHIFT 12 -#define VSC73XX_ICPU_CHIPID_ID_MASK 0xffff -#define VSC73XX_ICPU_CHIPID_REV_SHIFT 28 -#define VSC73XX_ICPU_CHIPID_REV_MASK 0xf -#define VSC73XX_ICPU_CHIPID_ID_7385 0x7385 -#define VSC73XX_ICPU_CHIPID_ID_7395 0x7395 - -#define VSC73XX_CMD_MODE_READ 0 -#define VSC73XX_CMD_MODE_WRITE 1 -#define VSC73XX_CMD_MODE_SHIFT 4 -#define VSC73XX_CMD_BLOCK_SHIFT 5 -#define VSC73XX_CMD_BLOCK_MASK 0x7 -#define VSC73XX_CMD_SUBBLOCK_MASK 0xf - -#define VSC7385_CLOCK_DELAY ((3 << 4) | 3) -#define VSC7385_CLOCK_DELAY_MASK ((3 << 4) | 3) - -#define VSC73XX_ICPU_CTRL_STOP (VSC73XX_ICPU_CTRL_SRST_HOLD | \ - VSC73XX_ICPU_CTRL_BOOT_EN | \ - VSC73XX_ICPU_CTRL_EXT_ACC_EN) - -#define VSC73XX_ICPU_CTRL_START (VSC73XX_ICPU_CTRL_CLK_DIV | \ - VSC73XX_ICPU_CTRL_BOOT_EN | \ - VSC73XX_ICPU_CTRL_CLK_EN | \ - VSC73XX_ICPU_CTRL_SRST) - -#define VSC7385_ADVPORTM_MASK (VSC73XX_ADVPORTM_IFG_PPM | \ - VSC73XX_ADVPORTM_EXC_COL_CONT | \ - VSC73XX_ADVPORTM_EXT_PORT | \ - VSC73XX_ADVPORTM_INV_GTX | \ - VSC73XX_ADVPORTM_ENA_GTX | \ - VSC73XX_ADVPORTM_DDR_MODE | \ - VSC73XX_ADVPORTM_IO_LOOPBACK | \ - VSC73XX_ADVPORTM_HOST_LOOPBACK) - -#define VSC7385_ADVPORTM_INIT (VSC73XX_ADVPORTM_EXT_PORT | \ - VSC73XX_ADVPORTM_ENA_GTX | \ - VSC73XX_ADVPORTM_DDR_MODE) - -#define VSC7385_MAC_CFG_RESET (VSC73XX_MAC_CFG_PORT_RST | \ - VSC73XX_MAC_CFG_MAC_RX_RST | \ - VSC73XX_MAC_CFG_MAC_TX_RST) - -#define VSC73XX_MAC_CFG_INIT (VSC73XX_MAC_CFG_TX_EN | \ - VSC73XX_MAC_CFG_FDX | \ - VSC73XX_MAC_CFG_GIGE | \ - VSC73XX_MAC_CFG_RX_EN) - -#define VSC73XX_RESET_DELAY 100 - -struct vsc7385 { - struct spi_device *spi; - struct mutex lock; - struct vsc7385_platform_data *pdata; -}; - -static int vsc7385_is_addr_valid(u8 block, u8 subblock) -{ - switch (block) { - case VSC73XX_BLOCK_MAC: - switch (subblock) { - case 0 ... 4: - case 6: - return 1; - } - break; - - case VSC73XX_BLOCK_2: - case VSC73XX_BLOCK_SYSTEM: - switch (subblock) { - case 0: - return 1; - } - break; - - case VSC73XX_BLOCK_MII: - case VSC73XX_BLOCK_4: - case VSC73XX_BLOCK_5: - switch (subblock) { - case 0 ... 1: - return 1; - } - break; - } - - return 0; -} - -static inline u8 vsc7385_make_addr(u8 mode, u8 block, u8 subblock) -{ - u8 ret; - - ret = (block & VSC73XX_CMD_BLOCK_MASK) << VSC73XX_CMD_BLOCK_SHIFT; - ret |= (mode & 1) << VSC73XX_CMD_MODE_SHIFT; - ret |= subblock & VSC73XX_CMD_SUBBLOCK_MASK; - - return ret; -} - -static int vsc7385_read(struct vsc7385 *vsc, u8 block, u8 subblock, u8 reg, - u32 *value) -{ - u8 cmd[4]; - u8 buf[4]; - struct spi_transfer t[2]; - struct spi_message m; - int err; - - if (!vsc7385_is_addr_valid(block, subblock)) - return -EINVAL; - - spi_message_init(&m); - - memset(&t, 0, sizeof(t)); - - t[0].tx_buf = cmd; - t[0].len = sizeof(cmd); - spi_message_add_tail(&t[0], &m); - - t[1].rx_buf = buf; - t[1].len = sizeof(buf); - spi_message_add_tail(&t[1], &m); - - cmd[0] = vsc7385_make_addr(VSC73XX_CMD_MODE_READ, block, subblock); - cmd[1] = reg; - cmd[2] = 0; - cmd[3] = 0; - - mutex_lock(&vsc->lock); - err = spi_sync(vsc->spi, &m); - mutex_unlock(&vsc->lock); - - if (err) - return err; - - *value = (((u32) buf[0]) << 24) | (((u32) buf[1]) << 16) | - (((u32) buf[2]) << 8) | ((u32) buf[3]); - - return 0; -} - - -static int vsc7385_write(struct vsc7385 *vsc, u8 block, u8 subblock, u8 reg, - u32 value) -{ - u8 cmd[2]; - u8 buf[4]; - struct spi_transfer t[2]; - struct spi_message m; - int err; - - if (!vsc7385_is_addr_valid(block, subblock)) - return -EINVAL; - - spi_message_init(&m); - - memset(&t, 0, sizeof(t)); - - t[0].tx_buf = cmd; - t[0].len = sizeof(cmd); - spi_message_add_tail(&t[0], &m); - - t[1].tx_buf = buf; - t[1].len = sizeof(buf); - spi_message_add_tail(&t[1], &m); - - cmd[0] = vsc7385_make_addr(VSC73XX_CMD_MODE_WRITE, block, subblock); - cmd[1] = reg; - - buf[0] = (value >> 24) & 0xff; - buf[1] = (value >> 16) & 0xff; - buf[2] = (value >> 8) & 0xff; - buf[3] = value & 0xff; - - mutex_lock(&vsc->lock); - err = spi_sync(vsc->spi, &m); - mutex_unlock(&vsc->lock); - - return err; -} - -static inline int vsc7385_write_verify(struct vsc7385 *vsc, u8 block, - u8 subblock, u8 reg, u32 value, - u32 read_mask, u32 read_val) -{ - struct spi_device *spi = vsc->spi; - u32 t; - int err; - - err = vsc7385_write(vsc, block, subblock, reg, value); - if (err) - return err; - - err = vsc7385_read(vsc, block, subblock, reg, &t); - if (err) - return err; - - if ((t & read_mask) != read_val) { - dev_err(&spi->dev, "register write error\n"); - return -EIO; - } - - return 0; -} - -static inline int vsc7385_set_clock_delay(struct vsc7385 *vsc, u32 val) -{ - return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, - VSC73XX_ICPU_CLOCK_DELAY, val); -} - -static inline int vsc7385_get_clock_delay(struct vsc7385 *vsc, u32 *val) -{ - return vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, - VSC73XX_ICPU_CLOCK_DELAY, val); -} - -static inline int vsc7385_icpu_stop(struct vsc7385 *vsc) -{ - return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_CTRL, - VSC73XX_ICPU_CTRL_STOP); -} - -static inline int vsc7385_icpu_start(struct vsc7385 *vsc) -{ - return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_CTRL, - VSC73XX_ICPU_CTRL_START); -} - -static inline int vsc7385_icpu_reset(struct vsc7385 *vsc) -{ - int rc; - - rc = vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_ADDR, - 0x0000); - if (rc) - dev_err(&vsc->spi->dev, - "could not reset microcode, err=%d\n", rc); - - return rc; -} - -static int vsc7385_upload_ucode(struct vsc7385 *vsc) -{ - struct spi_device *spi = vsc->spi; - const struct firmware *firmware; - char *ucode_name; - unsigned char *dp; - unsigned int curVal; - int i; - int diffs; - int rc; - - ucode_name = (vsc->pdata->ucode_name) ? vsc->pdata->ucode_name - : "vsc7385_ucode.bin"; - rc = request_firmware(&firmware, ucode_name, &spi->dev); - if (rc) { - dev_err(&spi->dev, "request_firmware failed, err=%d\n", - rc); - return rc; - } - - rc = vsc7385_icpu_stop(vsc); - if (rc) - goto out; - - rc = vsc7385_icpu_reset(vsc); - if (rc) - goto out; - - dev_info(&spi->dev, "uploading microcode...\n"); - - dp = (unsigned char *) firmware->data; - for (i = 0; i < firmware->size; i++) { - rc = vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, - VSC73XX_ICPU_SRAM, *dp++); - if (rc) { - dev_err(&spi->dev, "could not load microcode, err=%d\n", - rc); - goto out; - } - } - - rc = vsc7385_icpu_reset(vsc); - if (rc) - goto out; - - dev_info(&spi->dev, "verifying microcode...\n"); - - dp = (unsigned char *) firmware->data; - diffs = 0; - for (i = 0; i < firmware->size; i++) { - rc = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, - VSC73XX_ICPU_SRAM, &curVal); - if (rc) { - dev_err(&spi->dev, "could not read microcode %d\n", - rc); - goto out; - } - - if (curVal > 0xff) { - dev_err(&spi->dev, "bad val read: %04x : %02x %02x\n", - i, *dp, curVal); - rc = -EIO; - goto out; - } - - if ((curVal & 0xff) != *dp) { - diffs++; - dev_err(&spi->dev, "verify error: %04x : %02x %02x\n", - i, *dp, curVal); - - if (diffs > 4) - break; - } - dp++; - } - - if (diffs) { - dev_err(&spi->dev, "microcode verification failed\n"); - rc = -EIO; - goto out; - } - - dev_info(&spi->dev, "microcode uploaded\n"); - - rc = vsc7385_icpu_start(vsc); - -out: - release_firmware(firmware); - return rc; -} - -static int vsc7385_setup(struct vsc7385 *vsc) -{ - struct vsc7385_platform_data *pdata = vsc->pdata; - u32 t; - int err; - - err = vsc7385_write_verify(vsc, VSC73XX_BLOCK_SYSTEM, 0, - VSC73XX_ICPU_CLOCK_DELAY, - VSC7385_CLOCK_DELAY, - VSC7385_CLOCK_DELAY_MASK, - VSC7385_CLOCK_DELAY); - if (err) - goto err; - - err = vsc7385_write_verify(vsc, VSC73XX_BLOCK_MAC, - VSC73XX_SUBBLOCK_PORT_MAC, VSC73XX_ADVPORTM, - VSC7385_ADVPORTM_INIT, - VSC7385_ADVPORTM_MASK, - VSC7385_ADVPORTM_INIT); - if (err) - goto err; - - err = vsc7385_write(vsc, VSC73XX_BLOCK_MAC, VSC73XX_SUBBLOCK_PORT_MAC, - VSC73XX_MAC_CFG, VSC7385_MAC_CFG_RESET); - if (err) - goto err; - - t = VSC73XX_MAC_CFG_INIT; - t |= VSC73XX_MAC_CFG_TX_IPG(pdata->mac_cfg.tx_ipg); - t |= VSC73XX_MAC_CFG_CLK_SEL(pdata->mac_cfg.clk_sel); - if (pdata->mac_cfg.bit2) - t |= VSC73XX_MAC_CFG_BIT2; - - err = vsc7385_write(vsc, VSC73XX_BLOCK_MAC, VSC73XX_SUBBLOCK_PORT_MAC, - VSC73XX_MAC_CFG, t); - if (err) - goto err; - - return 0; - -err: - return err; -} - -static int vsc7385_detect(struct vsc7385 *vsc) -{ - struct spi_device *spi = vsc->spi; - u32 t; - u32 id; - u32 rev; - int err; - - err = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, - VSC73XX_ICPU_MBOX_VAL, &t); - if (err) { - dev_err(&spi->dev, "unable to read mailbox, err=%d\n", err); - return err; - } - - if (t == 0xffffffff) { - dev_dbg(&spi->dev, "assert chip reset\n"); - if (vsc->pdata->reset) - vsc->pdata->reset(); - - } - - err = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, - VSC73XX_ICPU_CHIPID, &t); - if (err) { - dev_err(&spi->dev, "unable to read chip id, err=%d\n", err); - return err; - } - - id = (t >> VSC73XX_ICPU_CHIPID_ID_SHIFT) & VSC73XX_ICPU_CHIPID_ID_MASK; - switch (id) { - case VSC73XX_ICPU_CHIPID_ID_7385: - case VSC73XX_ICPU_CHIPID_ID_7395: - break; - default: - dev_err(&spi->dev, "unsupported chip, id=%04x\n", id); - return -ENODEV; - } - - rev = (t >> VSC73XX_ICPU_CHIPID_REV_SHIFT) & - VSC73XX_ICPU_CHIPID_REV_MASK; - dev_info(&spi->dev, "VSC%04X (rev. %d) switch found\n", id, rev); - - return 0; -} - -static int vsc7385_probe(struct spi_device *spi) -{ - struct vsc7385 *vsc; - struct vsc7385_platform_data *pdata; - int err; - - printk(KERN_INFO DRV_DESC " version " DRV_VERSION"\n"); - - pdata = spi->dev.platform_data; - if (!pdata) { - dev_err(&spi->dev, "no platform data specified\n"); - return -ENODEV; - } - - vsc = kzalloc(sizeof(*vsc), GFP_KERNEL); - if (!vsc) { - dev_err(&spi->dev, "no memory for private data\n"); - return -ENOMEM; - } - - mutex_init(&vsc->lock); - vsc->pdata = pdata; - vsc->spi = spi_dev_get(spi); - dev_set_drvdata(&spi->dev, vsc); - - spi->mode = SPI_MODE_0; - spi->bits_per_word = 8; - err = spi_setup(spi); - if (err) { - dev_err(&spi->dev, "spi_setup failed, err=%d\n", err); - goto err_drvdata; - } - - err = vsc7385_detect(vsc); - if (err) { - dev_err(&spi->dev, "no chip found, err=%d\n", err); - goto err_drvdata; - } - - err = vsc7385_upload_ucode(vsc); - if (err) - goto err_drvdata; - - err = vsc7385_setup(vsc); - if (err) - goto err_drvdata; - - return 0; - -err_drvdata: - dev_set_drvdata(&spi->dev, NULL); - kfree(vsc); - return err; -} - -static int vsc7385_remove(struct spi_device *spi) -{ - struct vsc7385_data *vsc; - - vsc = dev_get_drvdata(&spi->dev); - dev_set_drvdata(&spi->dev, NULL); - kfree(vsc); - - return 0; -} - -static struct spi_driver vsc7385_driver = { - .driver = { - .name = DRV_NAME, - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - .probe = vsc7385_probe, - .remove = vsc7385_remove, -}; - -static int __init vsc7385_init(void) -{ - return spi_register_driver(&vsc7385_driver); -} -module_init(vsc7385_init); - -static void __exit vsc7385_exit(void) -{ - spi_unregister_driver(&vsc7385_driver); -} -module_exit(vsc7385_exit); - -MODULE_DESCRIPTION(DRV_DESC); -MODULE_VERSION(DRV_VERSION); -MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); -MODULE_LICENSE("GPL v2"); - diff --git a/target/linux/ar71xx/files/include/linux/leds-nu801.h b/target/linux/ar71xx/files/include/linux/leds-nu801.h deleted file mode 100644 index 0fc310d277..0000000000 --- a/target/linux/ar71xx/files/include/linux/leds-nu801.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef __LEDS_NU801_H__ -#define __LEDS_NU801_H__ - -/* - * Definitions for LED driver for NU801 - * - * Kevin Paul Herbert - * Copyright (c) 2012, Meraki, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/leds.h> - -struct led_nu801_template { - const char *device_name; /* Name of the platform device */ - const char *name; /* Name of this LED chain */ - int num_leds; /* Number of LEDs in the chain */ - unsigned cki; /* GPIO pin for CKI */ - unsigned sdi; /* GPIO pin for SDI */ - int lei; /* GPIO pin for LEI; < 0 if none */ - u32 ndelay; /* Delay in nanoseconds */ - enum led_brightness init_brightness[3]; /* Default rgb state */ -#ifdef CONFIG_LEDS_TRIGGERS - const char *default_trigger; /* default trigger */ -#endif - const char *led_colors[3]; /* rgb color order */ -}; - -struct led_nu801_platform_data { - int num_controllers; /* Numnber of controllers */ - struct led_nu801_template *template; /* Template per controller */ -}; - -#endif /* __LEDS_NU801_H__ */ diff --git a/target/linux/ar71xx/files/include/linux/nxp_74hc153.h b/target/linux/ar71xx/files/include/linux/nxp_74hc153.h deleted file mode 100644 index 20b8845e53..0000000000 --- a/target/linux/ar71xx/files/include/linux/nxp_74hc153.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * NXP 74HC153 - Dual 4-input multiplexer defines - * - * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _NXP_74HC153_H -#define _NXP_74HC153_H - -#define NXP_74HC153_DRIVER_NAME "nxp-74hc153" - -struct nxp_74hc153_platform_data { - unsigned gpio_base; - unsigned gpio_pin_s0; - unsigned gpio_pin_s1; - unsigned gpio_pin_1y; - unsigned gpio_pin_2y; -}; - -#endif /* _NXP_74HC153_H */ diff --git a/target/linux/ar71xx/files/include/linux/platform/ar934x_nfc.h b/target/linux/ar71xx/files/include/linux/platform/ar934x_nfc.h deleted file mode 100644 index 371aaee7f8..0000000000 --- a/target/linux/ar71xx/files/include/linux/platform/ar934x_nfc.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Platform data definition for the built-in NAND controller of the - * Atheros AR934x SoCs - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _AR934X_NFC_PLATFORM_H -#define _AR934X_NFC_PLATFORM_H - -#define AR934X_NFC_DRIVER_NAME "ar934x-nfc" - -struct mtd_info; -struct mtd_partition; - -enum ar934x_nfc_ecc_mode { - AR934X_NFC_ECC_SOFT = 0, - AR934X_NFC_ECC_HW, - AR934X_NFC_ECC_SOFT_BCH, -}; - -struct ar934x_nfc_platform_data { - const char *name; - struct mtd_partition *parts; - int nr_parts; - - bool swap_dma; - enum ar934x_nfc_ecc_mode ecc_mode; - - void (*hw_reset)(bool active); - void (*select_chip)(int chip_no); - int (*scan_fixup)(struct mtd_info *mtd); -}; - -#endif /* _AR934X_NFC_PLATFORM_H */ diff --git a/target/linux/ar71xx/files/include/linux/platform_data/gpio-latch.h b/target/linux/ar71xx/files/include/linux/platform_data/gpio-latch.h deleted file mode 100644 index 0450e679ec..0000000000 --- a/target/linux/ar71xx/files/include/linux/platform_data/gpio-latch.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _GPIO_LATCH_H_ -#define _GPIO_LATCH_H_ - -#define GPIO_LATCH_DRIVER_NAME "gpio-latch" - -struct gpio_latch_platform_data { - int base; - int num_gpios; - int *gpios; - int le_gpio_index; - bool le_active_low; -}; - -#endif /* _GPIO_LATCH_H_ */ diff --git a/target/linux/ar71xx/files/include/linux/platform_data/rb91x_nand.h b/target/linux/ar71xx/files/include/linux/platform_data/rb91x_nand.h deleted file mode 100644 index 5f17fb8148..0000000000 --- a/target/linux/ar71xx/files/include/linux/platform_data/rb91x_nand.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _RB91X_NAND_H_ -#define _RB91X_NAND_H_ - -#define RB91X_NAND_DRIVER_NAME "rb91x-nand" - -struct rb91x_nand_platform_data { - int gpio_nce; /* chip enable, active low */ - int gpio_ale; /* address latch enable */ - int gpio_cle; /* command latch enable */ - int gpio_rdy; - int gpio_read; - int gpio_nrw; /* read/write enable, active low */ - int gpio_nle; /* latch enable, active low */ -}; - -#endif /* _RB91X_NAND_H_ */
\ No newline at end of file diff --git a/target/linux/ar71xx/files/include/linux/spi/vsc7385.h b/target/linux/ar71xx/files/include/linux/spi/vsc7385.h deleted file mode 100644 index 1072ad7941..0000000000 --- a/target/linux/ar71xx/files/include/linux/spi/vsc7385.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Platform data definition for the Vitesse VSC7385 ethernet switch driver - * - * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -struct vsc7385_platform_data { - void (*reset)(void); - char *ucode_name; - struct { - u32 tx_ipg:5; - u32 bit2:1; - u32 clk_sel:3; - } mac_cfg; -}; diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default deleted file mode 100644 index 25b58ae91e..0000000000 --- a/target/linux/ar71xx/generic/config-default +++ /dev/null @@ -1,227 +0,0 @@ -CONFIG_ATH79_DEV_AP9X_PCI=y -CONFIG_ATH79_DEV_ETH=y -CONFIG_ATH79_DEV_GPIO_BUTTONS=y -CONFIG_ATH79_DEV_LEDS_GPIO=y -CONFIG_ATH79_DEV_M25P80=y -CONFIG_ATH79_DEV_NFC=y -CONFIG_ATH79_DEV_SPI=y -CONFIG_ATH79_DEV_USB=y -CONFIG_ATH79_DEV_WMAC=y -CONFIG_ATH79_MACH_A60=y -CONFIG_ATH79_MACH_ALFA_AP120C=y -CONFIG_ATH79_MACH_ALFA_AP96=y -CONFIG_ATH79_MACH_ALFA_NX=y -CONFIG_ATH79_MACH_ALL0258N=y -CONFIG_ATH79_MACH_ALL0315N=y -CONFIG_ATH79_MACH_ANTMINER_S1=y -CONFIG_ATH79_MACH_ANTMINER_S3=y -CONFIG_ATH79_MACH_ANTROUTER_R1=y -CONFIG_ATH79_MACH_AP121=y -CONFIG_ATH79_MACH_AP121F=y -CONFIG_ATH79_MACH_AP132=y -CONFIG_ATH79_MACH_AP136=y -CONFIG_ATH79_MACH_AP143=y -CONFIG_ATH79_MACH_AP147=y -CONFIG_ATH79_MACH_AP152=y -CONFIG_ATH79_MACH_AP531B0=y -CONFIG_ATH79_MACH_AP90Q=y -CONFIG_ATH79_MACH_AP91_5G=y -CONFIG_ATH79_MACH_AP96=y -CONFIG_ATH79_MACH_ARCHER_C25_V1=y -CONFIG_ATH79_MACH_ARCHER_C58_V1=y -CONFIG_ATH79_MACH_ARCHER_C59_V1=y -CONFIG_ATH79_MACH_ARCHER_C60_V1=y -CONFIG_ATH79_MACH_ARCHER_C60_V2=y -CONFIG_ATH79_MACH_ARCHER_C7=y -CONFIG_ATH79_MACH_ARDUINO_YUN=y -CONFIG_ATH79_MACH_AW_NR580=y -CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y -CONFIG_ATH79_MACH_BSB=y -CONFIG_ATH79_MACH_C55=y -CONFIG_ATH79_MACH_CAP324=y -CONFIG_ATH79_MACH_CAP4200AG=y -CONFIG_ATH79_MACH_CARAMBOLA2=y -CONFIG_ATH79_MACH_CF_E316N_V2=y -CONFIG_ATH79_MACH_CF_E320N_V2=y -CONFIG_ATH79_MACH_CF_E355AC=y -CONFIG_ATH79_MACH_CF_E375AC=y -CONFIG_ATH79_MACH_CF_E380AC_V1=y -CONFIG_ATH79_MACH_CF_E380AC_V2=y -CONFIG_ATH79_MACH_CF_E520N=y -CONFIG_ATH79_MACH_CF_E530N=y -CONFIG_ATH79_MACH_CPE505N=y -CONFIG_ATH79_MACH_CPE510=y -CONFIG_ATH79_MACH_CPE830=y -CONFIG_ATH79_MACH_CPE870=y -CONFIG_ATH79_MACH_CR3000=y -CONFIG_ATH79_MACH_CR5000=y -CONFIG_ATH79_MACH_DAP_1330_A1=y -CONFIG_ATH79_MACH_DAP_2695_A1=y -CONFIG_ATH79_MACH_DB120=y -CONFIG_ATH79_MACH_DGL_5500_A1=y -CONFIG_ATH79_MACH_DHP_1565_A1=y -CONFIG_ATH79_MACH_DIR_505_A1=y -CONFIG_ATH79_MACH_DIR_825_B1=y -CONFIG_ATH79_MACH_DIR_825_C1=y -CONFIG_ATH79_MACH_DIR_869_A1=y -CONFIG_ATH79_MACH_DLAN_HOTSPOT=y -CONFIG_ATH79_MACH_DLAN_PRO_1200_AC=y -CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y -CONFIG_ATH79_MACH_DR342=y -CONFIG_ATH79_MACH_DR344=y -CONFIG_ATH79_MACH_DR531=y -CONFIG_ATH79_MACH_DRAGINO2=y -CONFIG_ATH79_MACH_E1700AC_V2=y -CONFIG_ATH79_MACH_E2100L=y -CONFIG_ATH79_MACH_E558_V2=y -CONFIG_ATH79_MACH_E600G_V2=y -CONFIG_ATH79_MACH_E750A_V4=y -CONFIG_ATH79_MACH_E750G_V8=y -CONFIG_ATH79_MACH_EAP120=y -CONFIG_ATH79_MACH_EAP300V2=y -CONFIG_ATH79_MACH_EAP7660D=y -CONFIG_ATH79_MACH_EL_M150=y -CONFIG_ATH79_MACH_EL_MINI=y -CONFIG_ATH79_MACH_EPG5000=y -CONFIG_ATH79_MACH_ESR1750=y -CONFIG_ATH79_MACH_ESR900=y -CONFIG_ATH79_MACH_EW_BALIN=y -CONFIG_ATH79_MACH_EW_DORIN=y -CONFIG_ATH79_MACH_FRITZ300E=y -CONFIG_ATH79_MACH_FRITZ4020=y -CONFIG_ATH79_MACH_FRITZ450E=y -CONFIG_ATH79_MACH_GL_AR150=y -CONFIG_ATH79_MACH_GL_AR300=y -CONFIG_ATH79_MACH_GL_AR300M=y -CONFIG_ATH79_MACH_GL_AR750=y -CONFIG_ATH79_MACH_GL_AR750S=y -CONFIG_ATH79_MACH_GL_DOMINO=y -CONFIG_ATH79_MACH_GL_INET=y -CONFIG_ATH79_MACH_GL_MIFI=y -CONFIG_ATH79_MACH_GL_USB150=y -CONFIG_ATH79_MACH_GS_MINIBOX_V32=y -CONFIG_ATH79_MACH_GS_OOLITE_V1=y -CONFIG_ATH79_MACH_GS_OOLITE_V5_2=y -CONFIG_ATH79_MACH_HIWIFI_HC6361=y -CONFIG_ATH79_MACH_HORNET_UB=y -CONFIG_ATH79_MACH_JA76PF=y -CONFIG_ATH79_MACH_JWAP003=y -CONFIG_ATH79_MACH_JWAP230=y -CONFIG_ATH79_MACH_KOALA=y -CONFIG_ATH79_MACH_LAN_TURTLE=y -CONFIG_ATH79_MACH_LIMA=y -CONFIG_ATH79_MACH_MC_MAC1200R=y -CONFIG_ATH79_MACH_MR12=y -CONFIG_ATH79_MACH_MR16=y -CONFIG_ATH79_MACH_MR1750=y -CONFIG_ATH79_MACH_MR600=y -CONFIG_ATH79_MACH_MR900=y -CONFIG_ATH79_MACH_MYNET_N600=y -CONFIG_ATH79_MACH_MYNET_N750=y -CONFIG_ATH79_MACH_MYNET_REXT=y -CONFIG_ATH79_MACH_MZK_W04NU=y -CONFIG_ATH79_MACH_MZK_W300NH=y -CONFIG_ATH79_MACH_N5Q=y -CONFIG_ATH79_MACH_NBG6716=y -CONFIG_ATH79_MACH_OM2P=y -CONFIG_ATH79_MACH_OM5P=y -CONFIG_ATH79_MACH_OM5P_AC=y -CONFIG_ATH79_MACH_OM5P_ACv2=y -CONFIG_ATH79_MACH_OMY_G1=y -CONFIG_ATH79_MACH_OMY_X1=y -CONFIG_ATH79_MACH_ONION_OMEGA=y -CONFIG_ATH79_MACH_PB42=y -CONFIG_ATH79_MACH_PB44=y -CONFIG_ATH79_MACH_PQI_AIR_PEN=y -CONFIG_ATH79_MACH_QIHOO_C301=y -CONFIG_ATH79_MACH_R36A=y -CONFIG_ATH79_MACH_R602N=y -CONFIG_ATH79_MACH_RE355=y -CONFIG_ATH79_MACH_RE450=y -CONFIG_ATH79_MACH_RME_EG200=y -CONFIG_ATH79_MACH_RUT9XX=y -CONFIG_ATH79_MACH_RW2458N=y -CONFIG_ATH79_MACH_SC1750=y -CONFIG_ATH79_MACH_SC300M=y -CONFIG_ATH79_MACH_SC450=y -CONFIG_ATH79_MACH_SMART_300=y -CONFIG_ATH79_MACH_SOM9331=y -CONFIG_ATH79_MACH_SR3200=y -CONFIG_ATH79_MACH_T830=y -CONFIG_ATH79_MACH_TELLSTICK_ZNET_LITE=y -CONFIG_ATH79_MACH_TEW_673GRU=y -CONFIG_ATH79_MACH_TEW_732BR=y -CONFIG_ATH79_MACH_TEW_823DRU=y -CONFIG_ATH79_MACH_TL_MR3X20=y -CONFIG_ATH79_MACH_TL_MR6400=y -CONFIG_ATH79_MACH_TL_WDR3500=y -CONFIG_ATH79_MACH_TL_WDR4300=y -CONFIG_ATH79_MACH_TL_WDR6500_V2=y -CONFIG_ATH79_MACH_TL_WPA8630=y -CONFIG_ATH79_MACH_TL_WR1043ND=y -CONFIG_ATH79_MACH_TL_WR1043ND_V2=y -CONFIG_ATH79_MACH_TL_WR1043ND_V4=y -CONFIG_ATH79_MACH_TL_WR1043N_V5=y -CONFIG_ATH79_MACH_TL_WR2543N=y -CONFIG_ATH79_MACH_TL_WR703N=y -CONFIG_ATH79_MACH_TL_WR720N_V3=y -CONFIG_ATH79_MACH_TL_WR810N=y -CONFIG_ATH79_MACH_TL_WR810N_V2=y -CONFIG_ATH79_MACH_TL_WR841N_V8=y -CONFIG_ATH79_MACH_TL_WR841N_V9=y -CONFIG_ATH79_MACH_TL_WR902AC_V1=y -CONFIG_ATH79_MACH_TL_WR942N_V1=y -CONFIG_ATH79_MACH_TS_D084=y -CONFIG_ATH79_MACH_TUBE2H=y -CONFIG_ATH79_MACH_UBNT=y -CONFIG_ATH79_MACH_UBNT_UNIFIAC=y -CONFIG_ATH79_MACH_UBNT_XM=y -CONFIG_ATH79_MACH_WAM250=y -CONFIG_ATH79_MACH_WEIO=y -CONFIG_ATH79_MACH_WHR_HP_G300N=y -CONFIG_ATH79_MACH_WIFI_PINEAPPLE_NANO=y -CONFIG_ATH79_MACH_WLAE_AG300N=y -CONFIG_ATH79_MACH_WLR8100=y -CONFIG_ATH79_MACH_WNDAP360=y -CONFIG_ATH79_MACH_WNDR3700=y -CONFIG_ATH79_MACH_WNR2200=y -CONFIG_ATH79_MACH_WP543=y -CONFIG_ATH79_MACH_WPE72=y -CONFIG_ATH79_MACH_WPJ342=y -CONFIG_ATH79_MACH_WPJ344=y -CONFIG_ATH79_MACH_WPJ531=y -CONFIG_ATH79_MACH_WPJ558=y -CONFIG_ATH79_MACH_WPJ563=y -CONFIG_ATH79_MACH_WRT160NL=y -CONFIG_ATH79_MACH_WRT400N=y -CONFIG_ATH79_MACH_WRTNODE2Q=y -CONFIG_ATH79_MACH_WZR_450HP2=y -CONFIG_ATH79_MACH_WZR_HP_AG300H=y -CONFIG_ATH79_MACH_WZR_HP_G300NH=y -CONFIG_ATH79_MACH_WZR_HP_G300NH2=y -CONFIG_ATH79_MACH_WZR_HP_G450H=y -CONFIG_ATH79_MACH_XD3200=y -CONFIG_ATH79_MACH_ZCN_1523H=y -CONFIG_ATH79_NVRAM=y -CONFIG_ATH79_PCI_ATH9K_FIXUP=y -CONFIG_BLK_MQ_PCI=y -CONFIG_GPIO_PCA953X=y -# CONFIG_GPIO_PCA953X_IRQ is not set -CONFIG_HW_HAS_PCI=y -# CONFIG_LEDS_WNDR3700_USB is not set -CONFIG_MYLOADER=y -CONFIG_PCI=y -CONFIG_PCI_AR724X=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_SERIAL_AR933X=y -CONFIG_SERIAL_AR933X_CONSOLE=y -CONFIG_SERIAL_AR933X_NR_UARTS=2 -CONFIG_SOC_AR71XX=y -CONFIG_SOC_AR724X=y -CONFIG_SOC_AR913X=y -CONFIG_SOC_AR933X=y -CONFIG_SOC_AR934X=y -CONFIG_SOC_QCA953X=y -CONFIG_SOC_QCA955X=y -CONFIG_SOC_QCA956X=y diff --git a/target/linux/ar71xx/generic/profiles/00-default.mk b/target/linux/ar71xx/generic/profiles/00-default.mk deleted file mode 100644 index 18fd385cc3..0000000000 --- a/target/linux/ar71xx/generic/profiles/00-default.mk +++ /dev/null @@ -1,18 +0,0 @@ -# -# Copyright (C) 2009 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/Default - NAME:=Default Profile (all drivers) - PACKAGES:= \ - kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport - PRIORITY := 1 -endef - -define Profile/Default/Description - Default package set compatible with most boards. -endef -$(eval $(call Profile,Default)) diff --git a/target/linux/ar71xx/generic/target.mk b/target/linux/ar71xx/generic/target.mk deleted file mode 100644 index 0a26110d27..0000000000 --- a/target/linux/ar71xx/generic/target.mk +++ /dev/null @@ -1,10 +0,0 @@ -BOARDNAME:=Generic -FEATURES += squashfs - -DEFAULT_PACKAGES += wpad-basic - -define Target/Description - Build firmware images for generic Atheros AR71xx/AR913x/AR934x based boards. -endef - - diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile deleted file mode 100644 index dea8338ddd..0000000000 --- a/target/linux/ar71xx/image/Makefile +++ /dev/null @@ -1,69 +0,0 @@ -# -# Copyright (C) 2008-2011 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -KERNEL_LOADADDR = 0x80060000 - -DEVICE_VARS += BOARDNAME CMDLINE CONSOLE LOADER_TYPE - -ifeq ($(SUBTARGET),generic) -include ./generic.mk -include ./generic-legacy-devices.mk -include ./generic-tp-link.mk -include ./generic-ubnt.mk -endif -ifeq ($(SUBTARGET),tiny) -include ./tiny.mk -include ./tiny-tp-link.mk -include ./tiny-legacy-devices.mk -include ./tiny-senao.mk -endif -ifeq ($(SUBTARGET),nand) -include ./nand.mk -endif -ifeq ($(SUBTARGET),mikrotik) -include ./mikrotik.mk -endif -include ./legacy.mk - -define Build/loader-common - rm -rf $@.src - $(MAKE) -C lzma-loader \ - PKG_BUILD_DIR="$@.src" \ - TARGET_DIR="$(dir $@)" LOADER_NAME="$(notdir $@)" \ - BOARD="$(BOARDNAME)" \ - LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \ - $(1) compile loader.$(LOADER_TYPE) - mv "$@.$(LOADER_TYPE)" "$@" - rm -rf $@.src -endef - -define Build/loader-kernel - $(call Build/loader-common,LOADER_DATA="$@") -endef - -define Build/loader-kernel-cmdline - $(call Build/loader-common,LOADER_DATA="$@" KERNEL_CMDLINE="$(CMDLINE)") -endef - -define Device/Default - BOARDNAME := - DEVICE_PROFILE = $$(BOARDNAME) - PROFILES = Default Minimal $$(DEVICE_PROFILE) - MTDPARTS := - BLOCKSIZE := 64k - CONSOLE := ttyS0,115200 - CMDLINE = $$(if $$(BOARDNAME),board=$$(BOARDNAME)) $$(if $$(MTDPARTS),mtdparts=$$(MTDPARTS)) $$(if $$(CONSOLE),console=$$(CONSOLE)) - KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma - COMPILE := - IMAGES := sysupgrade.bin - IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) -endef - -$(eval $(call BuildImage)) diff --git a/target/linux/ar71xx/image/common-tp-link.mk b/target/linux/ar71xx/image/common-tp-link.mk deleted file mode 100644 index 99acd7e584..0000000000 --- a/target/linux/ar71xx/image/common-tp-link.mk +++ /dev/null @@ -1,108 +0,0 @@ -DEVICE_VARS += LOADER_FLASH_OFFS TPLINK_BOARD_ID TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION TPLINK_HWID TPLINK_HWREV - -# Arguments: <output name> <kernel offset> -define Build/loader-okli - dd if=$(KDIR)/loader-$(word 1,$(1)).$(LOADER_TYPE) bs=$(word 2,$(1)) conv=sync of="$@.new" - cat "$@" >> "$@.new" - mv "$@.new" "$@" -endef - -define Build/loader-okli-compile - $(call Build/loader-common,FLASH_OFFS=$(LOADER_FLASH_OFFS) FLASH_MAX=0 KERNEL_CMDLINE="$(CMDLINE)") -endef - -# combine kernel and rootfs into one image -# mktplinkfw <type> <optional extra arguments to mktplinkfw binary> -# <type> is "sysupgrade" or "factory" -# -# -a align the rootfs start on an <align> bytes boundary -# -j add jffs2 end-of-filesystem markers -# -s strip padding from end of the image -# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x) -define Build/mktplinkfw - -$(STAGING_DIR_HOST)/bin/mktplinkfw \ - -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) \ - -m $(TPLINK_HEADER_VERSION) \ - -k $(IMAGE_KERNEL) \ - -r $@ \ - -o $@.new \ - -j -X 0x40000 \ - -a $(call rootfs_align,$(FILESYSTEM)) \ - $(wordlist 2,$(words $(1)),$(1)) \ - $(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv $@.new $@ || rm -f $@ -endef - -define Build/uImageArcher - mkimage -A $(LINUX_KARCH) \ - -O linux -T kernel \ - -C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \ - -n '$(call toupper,$(LINUX_KARCH)) OpenWrt Linux-$(LINUX_VERSION)' -d $@ $@.new - @mv $@.new $@ -endef - - -define Device/tplink - TPLINK_HWREV := 0x1 - TPLINK_HEADER_VERSION := 1 - IMAGES := sysupgrade.bin factory.bin -endef - -define Device/tplink-lzma - $(Device/tplink) - KERNEL := kernel-bin | patch-cmdline | lzma - KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | tplink-v1-header - IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade - IMAGE/factory.bin := append-rootfs | mktplinkfw factory -endef - -define Device/tplink-nolzma - $(Device/tplink) - LOADER_TYPE := gz - LOADER_FLASH_OFFS := 0x22000 - COMPILE := loader-$(1).gz - COMPILE/loader-$(1).gz := loader-okli-compile - KERNEL_NAME := vmlinux.bin.lzma - KERNEL := kernel-bin | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 7680 - KERNEL_INITRAMFS_NAME := vmlinux-initramfs.bin.lzma - KERNEL_INITRAMFS := kernel-bin | loader-kernel-cmdline | tplink-v1-header - IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade - IMAGE/factory.bin := append-rootfs | mktplinkfw factory -endef - -define Device/tplink-safeloader - $(Device/tplink) - KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header - IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \ - append-metadata | check-size $$$$(IMAGE_SIZE) - IMAGE/factory.bin := append-rootfs | tplink-safeloader factory -endef - -define Device/tplink-4m - $(Device/tplink-nolzma) - TPLINK_FLASHLAYOUT := 4M - IMAGE_SIZE := 3904k -endef - -define Device/tplink-8m - $(Device/tplink-nolzma) - TPLINK_FLASHLAYOUT := 8M - IMAGE_SIZE := 7936k -endef - -define Device/tplink-4mlzma - $(Device/tplink-lzma) - TPLINK_FLASHLAYOUT := 4Mlzma - IMAGE_SIZE := 3904k -endef - -define Device/tplink-8mlzma - $(Device/tplink-lzma) - TPLINK_FLASHLAYOUT := 8Mlzma - IMAGE_SIZE := 7936k -endef - -define Device/tplink-16mlzma - $(Device/tplink-lzma) - TPLINK_FLASHLAYOUT := 16Mlzma - IMAGE_SIZE := 15872k -endef diff --git a/target/linux/ar71xx/image/generic-legacy-devices.mk b/target/linux/ar71xx/image/generic-legacy-devices.mk deleted file mode 100644 index cbe039cd29..0000000000 --- a/target/linux/ar71xx/image/generic-legacy-devices.mk +++ /dev/null @@ -1,423 +0,0 @@ -define LegacyDevice/A60 - DEVICE_TITLE := OpenMesh A40/A60 - DEVICE_PACKAGES := om-watchdog kmod-ath10k-ct ath10k-firmware-qca988x-ct \ - mod-usb-core kmod-usb2 -endef -LEGACY_DEVICES += A60 - -define LegacyDevice/ALFANX - DEVICE_TITLE := ALFA Network N2/N5 board -endef -LEGACY_DEVICES += ALFANX - -define LegacyDevice/HORNETUB - DEVICE_TITLE := ALFA Network Hornet-UB board (8MB flash, 32MB ram) - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport -endef -LEGACY_DEVICES += HORNETUB - -define LegacyDevice/TUBE2H8M - DEVICE_TITLE := ALFA Network Tube2H board (8MB flash) -endef -LEGACY_DEVICES += TUBE2H8M - -define LegacyDevice/AP96 - DEVICE_TITLE := Atheros AP96 reference board - DEVICE_PACKAGES := kmod-usb2 -endef -LEGACY_DEVICES += AP96 - -define LegacyDevice/WNDAP360 - DEVICE_TITLE := NETGEAR WNDAP360 -endef -LEGACY_DEVICES += WNDAP360 - -define LegacyDevice/ALFAAP120C - DEVICE_TITLE := ALFA Network AP120C board -endef -LEGACY_DEVICES += ALFAAP120C - -define LegacyDevice/ALFAAP96 - DEVICE_TITLE := ALFA Network AP96 board - DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-rtc-pcf2123 -endef -LEGACY_DEVICES += ALFAAP96 - -define LegacyDevice/ALL0258N - DEVICE_TITLE := Allnet ALL0258N - DEVICE_PACKAGES := rssileds -endef -LEGACY_DEVICES += ALL0258N - -define LegacyDevice/ALL0315N - DEVICE_TITLE := Allnet ALL0315N - DEVICE_PACKAGES := rssileds -endef -LEGACY_DEVICES += ALL0315N - -define LegacyDevice/AP121_8M - DEVICE_TITLE := Atheros AP121 reference board (8MB flash) - DEVICE_PACKAGES := kmod-usb2 -endef -LEGACY_DEVICES += AP121_8M - -define LegacyDevice/AP121_16M - DEVICE_TITLE := Atheros AP121 reference board (16MB flash) - DEVICE_PACKAGES := kmod-usb2 -endef -LEGACY_DEVICES += AP121_16M - -define LegacyDevice/AP132 - DEVICE_TITLE := Atheros AP132 reference board - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage -endef -LEGACY_DEVICES += AP132 - -define LegacyDevice/AP135 - DEVICE_TITLE := Atheros AP135 reference board - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage -endef -LEGACY_DEVICES += AP135 - -define LegacyDevice/AP136_010 - DEVICE_TITLE := Atheros AP136-010 reference board - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage -endef -LEGACY_DEVICES += AP136_010 - -define LegacyDevice/AP136_020 - DEVICE_TITLE := Atheros AP136-020 reference board - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage -endef -LEGACY_DEVICES += AP136_020 - -define LegacyDevice/AP143_8M - DEVICE_TITLE := Qualcomm Atheros AP143 reference board (8MB flash) - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage -endef -LEGACY_DEVICES += AP143_8M - -define LegacyDevice/AP143_16M - DEVICE_TITLE := Qualcomm Atheros AP143 reference board (16MB flash) - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage -endef -LEGACY_DEVICES += AP143_16M - -define LegacyDevice/AP147_010 - DEVICE_TITLE := Qualcomm Atheros AP147-010 reference board - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage -endef -LEGACY_DEVICES += AP147_010 - -define LegacyDevice/AP152_16M - DEVICE_TITLE := Qualcomm Atheros AP152 reference board (16MB flash) - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage -endef -LEGACY_DEVICES += AP152_16M - -define LegacyDevice/BXU2000N2 - DEVICE_TITLE := BHU BXU2000n-2 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage -endef -LEGACY_DEVICES += BXU2000N2 - -define LegacyDevice/CAP4200AG - DEVICE_TITLE := Senao CAP4200AG -endef -LEGACY_DEVICES += CAP4200AG - -define LegacyDevice/DB120 - DEVICE_TITLE := Atheros DB120 reference board - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage -endef -LEGACY_DEVICES += DB120 - -define LegacyDevice/HORNETUBx2 - DEVICE_TITLE := ALFA Network Hornet-UB-x2 board (16MB flash, 64MB ram) - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport -endef -LEGACY_DEVICES += HORNETUBx2 - -define LegacyDevice/TUBE2H16M - DEVICE_TITLE := ALFA Network Tube2H board (16MB flash) -endef -LEGACY_DEVICES += TUBE2H16M - -define LegacyDevice/DIR505A1 - DEVICE_TITLE := D-Link DIR-505 rev. A1 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport -endef -LEGACY_DEVICES += DIR505A1 - -define LegacyDevice/DGL5500A1 - DEVICE_TITLE := D-Link DGL-5500 rev. A1 - DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct -endef -LEGACY_DEVICES += DGL5500A1 - -define LegacyDevice/TEW823DRU - DEVICE_TITLE := TRENDNet TEW-823DRU - DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct -endef -LEGACY_DEVICES += TEW823DRU - -define LegacyDevice/DHP1565A1 - DEVICE_TITLE := D-Link DHP-1565 rev. A1 - DEVICE_PACKAGES := kmod-usb2 -endef -LEGACY_DEVICES += DHP1565A1 - -define LegacyDevice/DIR825C1 - DEVICE_TITLE := D-Link DIR-825 rev. C1 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport -endef -LEGACY_DEVICES += DIR825C1 - -define LegacyDevice/DIR835A1 - DEVICE_TITLE := D-Link DIR-835 rev. A1 - DEVICE_PACKAGES := kmod-usb2 -endef -LEGACY_DEVICES += DIR835A1 - -define LegacyDevice/TEW732BR - DEVICE_TITLE := TRENDNet TEW-732BR -endef -LEGACY_DEVICES += TEW732BR - -define LegacyDevice/WRT160NL - DEVICE_TITLE := Linksys WRT160NL - DEVICE_PACKAGES := kmod-usb2 -endef -LEGACY_DEVICES += WRT160NL - -define LegacyDevice/MYNETREXT - DEVICE_TITLE := Western Digital My Net Wi-Fi Range Extender - DEVICE_PACKAGES := rssileds -endef -LEGACY_DEVICES += MYNETREXT - -define LegacyDevice/DIR825B1 - DEVICE_TITLE := D-Link DIR-825 rev. B1 - DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport -endef -LEGACY_DEVICES += DIR825B1 - -define LegacyDevice/TEW673GRU - DEVICE_TITLE := TRENDNet TEW-673GRU - DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 -endef -LEGACY_DEVICES += TEW673GRU - -define LegacyDevice/DLRTDEV01 - DEVICE_TITLE := PowerCloud Systems dlrtdev01 model - DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport -endef -LEGACY_DEVICES += DLRTDEV01 - -define LegacyDevice/dLAN_Hotspot - DEVICE_TITLE := devolo dLAN Hotspot -endef -LEGACY_DEVICES += dLAN_Hotspot - -define LegacyDevice/dLAN_pro_500_wp - DEVICE_TITLE := devolo dLAN pro 500 Wireless+ -endef -LEGACY_DEVICES += dLAN_pro_500_wp - -define LegacyDevice/dLAN_pro_1200_ac - DEVICE_TITLE := devolo dLAN pro 1200+ WiFi ac - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct -endef -LEGACY_DEVICES += dLAN_pro_1200_ac - -define LegacyDevice/ESR900 - DEVICE_TITLE := EnGenius ESR900 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport -endef -LEGACY_DEVICES += ESR900 - -define LegacyDevice/ESR1750 - DEVICE_TITLE := EnGenius ESR1750 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-ath10k-ct ath10k-firmware-qca988x-ct -endef -LEGACY_DEVICES += ESR1750 - -define LegacyDevice/EPG5000 - DEVICE_TITLE := EnGenius EPG5000 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-ath10k-ct ath10k-firmware-qca988x-ct -endef -LEGACY_DEVICES += EPG5000 - -define LegacyDevice/WP543_8M - DEVICE_TITLE := Compex WP543/WPJ543 (8MB flash) - DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 -endef -LEGACY_DEVICES += WP543_8M - -define LegacyDevice/WP543_16M - DEVICE_TITLE := Compex WP543/WPJ543 (16MB flash) - DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 -endef -LEGACY_DEVICES += WP543_16M - -define LegacyDevice/WPE72_8M - DEVICE_TITLE := Compex WPE72/WPE72NX (8MB flash) - DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 -endef -LEGACY_DEVICES += WPE72_8M - -define LegacyDevice/WPE72_16M - DEVICE_TITLE := Compex WPE72/WPE72NX (16MB flash) - DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 -endef -LEGACY_DEVICES += WPE72_16M - -define LegacyDevice/WNR2200 - DEVICE_TITLE := NETGEAR WNR2200 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport -endef -LEGACY_DEVICES += WNR2200 - -define LegacyDevice/OM2P - DEVICE_TITLE := OpenMesh OM2P/OM2P-HS/OM2P-LC - DEVICE_PACKAGES := om-watchdog -endef -LEGACY_DEVICES += OM2P - -define LegacyDevice/OM5P - DEVICE_TITLE := OpenMesh OM5P/OM5P-AN - DEVICE_PACKAGES := om-watchdog -endef -LEGACY_DEVICES += OM5P - -define LegacyDevice/OM5PAC - DEVICE_TITLE := OpenMesh OM5P-AC - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct om-watchdog -endef -LEGACY_DEVICES += OM5PAC - -define LegacyDevice/MR600 - DEVICE_TITLE := OpenMesh MR600 - DEVICE_PACKAGES := om-watchdog -endef -LEGACY_DEVICES += MR600 - -define LegacyDevice/MR900 - DEVICE_TITLE := OpenMesh MR900 - DEVICE_PACKAGES := om-watchdog -endef -LEGACY_DEVICES += MR900 - -define LegacyDevice/MR1750 - DEVICE_TITLE := OpenMesh MR1750 - DEVICE_PACKAGES := om-watchdog kmod-ath10k-ct ath10k-firmware-qca988x-ct -endef -LEGACY_DEVICES += MR1750 - -define LegacyDevice/ALL0305 - DEVICE_TITLE := Allnet ALL0305 - DEVICE_PACKAGES := fconfig kmod-ath5k -kmod-ath9k -endef -LEGACY_DEVICES += ALL0305 - -define LegacyDevice/EAP7660D - DEVICE_TITLE := Senao EAP7660D -endef -LEGACY_DEVICES += EAP7660D - -define LegacyDevice/JA76PF - DEVICE_TITLE := jjPlus JA76PF - DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-hwmon-core kmod-i2c-core kmod-hwmon-lm75 -endef -LEGACY_DEVICES += JA76PF - -define LegacyDevice/JA76PF2 - DEVICE_TITLE := jjPlus JA76PF2 -endef -LEGACY_DEVICES += JA76PF2 - -define LegacyDevice/JWAP003 - DEVICE_TITLE := jjPlus JWAP003 - DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 -endef -LEGACY_DEVICES += JWAP003 - -define LegacyDevice/PB42 - DEVICE_TITLE := Atheros PB42 reference board - DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 -endef -LEGACY_DEVICES += PB42 - -define LegacyDevice/PB44 - DEVICE_TITLE := Atheros PB44 reference board - DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 \ - vsc7385-ucode-pb44 vsc7395-ucode-pb44 -endef -LEGACY_DEVICES += PB44 - -define LegacyDevice/MZKW04NU - DEVICE_TITLE := Planex MZK-W04NU - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport -endef -LEGACY_DEVICES += MZKW04NU - -define LegacyDevice/MZKW300NH - DEVICE_TITLE := Planex MZK-W300NH -endef -LEGACY_DEVICES += MZKW300NH - -define LegacyDevice/EAP300V2 - DEVICE_TITLE := EnGenius EAP300V2 -endef -LEGACY_DEVICES += EAP300V2 - -define LegacyDevice/WRT400N - DEVICE_TITLE := Linksys WRT400N -endef -LEGACY_DEVICES += WRT400N - -define LegacyDevice/WZRHPG300NH - DEVICE_TITLE := Buffalo WZR-HP-G300NH - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport -endef -LEGACY_DEVICES += WZRHPG300NH - -define LegacyDevice/WZRHPG300NH2 - DEVICE_TITLE := Buffalo WZR-HP-G300NH2 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport -endef -LEGACY_DEVICES += WZRHPG300NH2 - -define LegacyDevice/WZRHPAG300H - DEVICE_TITLE := Buffalo WZR-HP-AG300H - DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport -endef -LEGACY_DEVICES += WZRHPAG300H - -define LegacyDevice/WZRHPG450H - DEVICE_TITLE := Buffalo WZR-HP-G450H - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport -endef -LEGACY_DEVICES += WZRHPG450H - -define LegacyDevice/WZR600DHP - DEVICE_TITLE := Buffalo WZR-600DHP - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport -endef -LEGACY_DEVICES += WZR600DHP - -define LegacyDevice/WZR450HP2 - DEVICE_TITLE := Buffalo WZR-450HP2 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport -endef -LEGACY_DEVICES += WZR450HP2 - -define LegacyDevice/ZCN1523H28 - DEVICE_TITLE := Zcomax ZCN-1523H-2-8 -endef -LEGACY_DEVICES += ZCN1523H28 - -define LegacyDevice/ZCN1523H516 - DEVICE_TITLE := Zcomax ZCN-1523H-5-16 -endef -LEGACY_DEVICES += ZCN1523H516 diff --git a/target/linux/ar71xx/image/generic-tp-link.mk b/target/linux/ar71xx/image/generic-tp-link.mk deleted file mode 100644 index dac5ad2850..0000000000 --- a/target/linux/ar71xx/image/generic-tp-link.mk +++ /dev/null @@ -1,544 +0,0 @@ -include ./common-tp-link.mk - - -define Device/archer-cxx - $(Device/tplink-safeloader) - KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma -endef - -define Device/archer-c25-v1 - $(Device/archer-cxx) - DEVICE_TITLE := TP-LINK Archer C25 v1 - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct - BOARDNAME := ARCHER-C25-V1 - TPLINK_BOARD_ID := ARCHER-C25-V1 - DEVICE_PROFILE := ARCHERC25V1 - IMAGE_SIZE := 7808k - MTDPARTS := spi0.0:128k(factory-uboot)ro,64k(u-boot)ro,7808k(firmware),128k(config)ro,64k(art)ro - SUPPORTED_DEVICES := archer-c25-v1 -endef -TARGET_DEVICES += archer-c25-v1 - -define Device/archer-c58-v1 - $(Device/archer-cxx) - DEVICE_TITLE := TP-LINK Archer C58 v1 - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct - BOARDNAME := ARCHER-C58-V1 - TPLINK_BOARD_ID := ARCHER-C58-V1 - DEVICE_PROFILE := ARCHERC58V1 - IMAGE_SIZE := 7936k - MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,7936k(firmware),64k(tplink)ro,64k(art)ro - SUPPORTED_DEVICES := archer-c58-v1 -endef -TARGET_DEVICES += archer-c58-v1 - -define Device/archer-c59-v1 - $(Device/archer-cxx) - DEVICE_TITLE := TP-LINK Archer C59 v1 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca9888-ct - BOARDNAME := ARCHER-C59-V1 - TPLINK_BOARD_ID := ARCHER-C59-V1 - DEVICE_PROFILE := ARCHERC59V1 - IMAGE_SIZE := 14528k - MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,14528k(firmware),1664k(tplink)ro,64k(art)ro - SUPPORTED_DEVICES := archer-c59-v1 -endef -TARGET_DEVICES += archer-c59-v1 - -define Device/archer-c59-v2 - $(Device/archer-c59-v1) - DEVICE_TITLE := TP-LINK Archer C59 v2 - BOARDNAME := ARCHER-C59-V2 - TPLINK_BOARD_ID := ARCHER-C59-V2 - DEVICE_PROFILE := ARCHERC59V2 - IMAGE_SIZE := 14400k - MTDPARTS := spi0.0:128k(factory-boot)ro,64k(u-boot)ro,64k(mac)ro,14400k(firmware),1664k(tplink)ro,64k@0xff0000(art)ro - SUPPORTED_DEVICES := archer-c59-v2 -endef -TARGET_DEVICES += archer-c59-v2 - -define Device/archer-c60-v1 - $(Device/archer-cxx) - DEVICE_TITLE := TP-LINK Archer C60 v1 - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct - BOARDNAME := ARCHER-C60-V1 - TPLINK_BOARD_ID := ARCHER-C60-V1 - DEVICE_PROFILE := ARCHERC60V1 - IMAGE_SIZE := 7936k - MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,7936k(firmware),64k(tplink)ro,64k(art)ro - SUPPORTED_DEVICES := archer-c60-v1 -endef -TARGET_DEVICES += archer-c60-v1 - -define Device/archer-c60-v2 - $(Device/archer-c60-v1) - DEVICE_TITLE := TP-LINK Archer C60 v2 - BOARDNAME := ARCHER-C60-V2 - TPLINK_BOARD_ID := ARCHER-C60-V2 - DEVICE_PROFILE := ARCHERC60V2 - IMAGE_SIZE := 7808k - MTDPARTS := spi0.0:192k(u-boot)ro,7808k(firmware),128k(tplink)ro,64k(art)ro - SUPPORTED_DEVICES := archer-c60-v2 -endef -TARGET_DEVICES += archer-c60-v2 - -define Device/archer-c5-v1 - $(Device/tplink-16mlzma) - DEVICE_TITLE := TP-LINK Archer C5 v1 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct - BOARDNAME := ARCHER-C5 - DEVICE_PROFILE := ARCHERC7 - TPLINK_HWID := 0xc5000001 -endef -TARGET_DEVICES += archer-c5-v1 - -define Device/archer-c7-v1 - $(Device/tplink-8mlzma) - DEVICE_TITLE := TP-LINK Archer C7 v1 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := ARCHER-C7 - DEVICE_PROFILE := ARCHERC7 - TPLINK_HWID := 0x75000001 -endef -TARGET_DEVICES += archer-c7-v1 - -define Device/archer-c7-v2 - $(Device/tplink-16mlzma) - DEVICE_TITLE := TP-LINK Archer C7 v2 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct - BOARDNAME := ARCHER-C7-V2 - DEVICE_PROFILE := ARCHERC7 - TPLINK_HWID := 0xc7000002 - IMAGES := sysupgrade.bin factory.bin factory-us.bin factory-eu.bin - IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US - IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU -endef -TARGET_DEVICES += archer-c7-v2 - -define Device/archer-c7-v2-il - $(Device/tplink-16mlzma) - DEVICE_TITLE := TP-LINK Archer C7 v2 (IL) - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct - BOARDNAME := ARCHER-C7-V2 - DEVICE_PROFILE := ARCHERC7 - TPLINK_HWID := 0xc7000002 - TPLINK_HWREV := 0x494c0001 -endef -TARGET_DEVICES += archer-c7-v2-il - -define Device/tl-wdr7500-v3 - $(Device/tplink-8mlzma) - DEVICE_TITLE := TP-LINK Archer C7 v3 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct - BOARDNAME := ARCHER-C7 - DEVICE_PROFILE := ARCHERC7 - TPLINK_HWID := 0x75000003 -endef -TARGET_DEVICES += tl-wdr7500-v3 - -define Device/archer-c7-v4 - $(Device/archer-cxx) - DEVICE_TITLE := TP-LINK Archer C7 v4 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct - BOARDNAME := ARCHER-C7-V4 - TPLINK_BOARD_ID := ARCHER-C7-V4 - IMAGE_SIZE := 15104k - MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,15104k(firmware),960k(config)ro,64k(art)ro - SUPPORTED_DEVICES := archer-c7-v4 -endef -TARGET_DEVICES += archer-c7-v4 - -define Device/archer-c7-v5 - $(Device/archer-c7-v4) - DEVICE_TITLE := TP-LINK Archer C7 v5 - BOARDNAME := ARCHER-C7-V5 - TPLINK_BOARD_ID := ARCHER-C7-V5 - IMAGE_SIZE := 15360k - MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,64k@0x50000(art)ro,128k@0x60000(info)ro,15360k@0xc0000(firmware) - SUPPORTED_DEVICES := archer-c7-v5 -endef -TARGET_DEVICES += archer-c7-v5 - -define Device/cpe510-520-v1 - DEVICE_TITLE := TP-LINK CPE510/520 v1 - BOARDNAME := CPE510 - TPLINK_BOARD_ID := CPE510 - LOADER_TYPE := elf - LOADER_FLASH_OFFS := 0x43000 - COMPILE := loader-$(1).elf - COMPILE/loader-$(1).elf := loader-okli-compile - KERNEL := kernel-bin | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 12288 - IMAGES += factory.bin - IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade - IMAGE/factory.bin := append-rootfs | tplink-safeloader factory - DEVICE_PACKAGES := rssileds - MTDPARTS := spi0.0:128k(u-boot)ro,64k(partition-table)ro,64k(product-info)ro,2048k(kernel),5632k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware) - IMAGE_SIZE := 7680k -endef -TARGET_DEVICES += cpe510-520-v1 - -define Device/cpe510-v2 - $(Device/cpe510-520-v1) - DEVICE_TITLE := TP-LINK CPE510 v2 - BOARDNAME := CPE510V2 - TPLINK_BOARD_ID := CPE510V2 -endef -TARGET_DEVICES += cpe510-v2 - -define Device/cpe210-220-v1 - $(Device/cpe510-520-v1) - DEVICE_TITLE := TP-LINK CPE210/220 v1 - BOARDNAME := CPE210 - TPLINK_BOARD_ID := CPE210 -endef -TARGET_DEVICES += cpe210-220-v1 - -define Device/cpe210-v2 - $(Device/tplink-safeloader) - DEVICE_TITLE := TP-LINK CPE210 v2 - BOARDNAME := CPE210V2 - TPLINK_BOARD_ID := CPE210V2 - TPLINK_HWID := 0x0 - TPLINK_HWREV := 0 - MTDPARTS := spi0.0:128k(u-boot)ro,64k(partition-table)ro,64k(product-info)ro,7680k(firmware),192k(config)ro,64k(ART)ro - IMAGE_SIZE := 7680k - KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header -O - KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | tplink-v1-header - DEVICE_PACKAGES := rssileds -endef -TARGET_DEVICES += cpe210-v2 - -define Device/cpe210-v3 - $(Device/tplink-safeloader) - DEVICE_TITLE := TP-LINK CPE210 v3 - BOARDNAME := CPE210V3 - TPLINK_BOARD_ID := CPE210V3 - TPLINK_HWID := 0x0 - TPLINK_HWREV := 0 - MTDPARTS := spi0.0:128k(u-boot)ro,64k(partition-table)ro,64k(product-info)ro,7680k(firmware),192k(config)ro,64k(ART)ro - IMAGE_SIZE := 7680k - KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header -O - KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | tplink-v1-header - DEVICE_PACKAGES := rssileds -endef -TARGET_DEVICES += cpe210-v3 - -define Device/wbs210-v1 - $(Device/cpe510-520-v1) - DEVICE_TITLE := TP-LINK WBS210 v1 - BOARDNAME := WBS210 - TPLINK_BOARD_ID := WBS210 -endef -TARGET_DEVICES += wbs210-v1 - -define Device/wbs510-v1 - $(Device/cpe510-520-v1) - DEVICE_TITLE := TP-LINK WBS510 v1 - BOARDNAME := WBS510 - TPLINK_BOARD_ID := WBS510 -endef -TARGET_DEVICES += wbs510-v1 - -define Device/eap120-v1 - DEVICE_TITLE := TP-LINK EAP120 v1 - MTDPARTS := spi0.0:128k(u-boot)ro,64k(partition-table)ro,64k(product-info)ro,1536k(kernel),14336k(rootfs),192k(config)ro,64k(ART)ro,15872k@0x40000(firmware) - IMAGE_SIZE := 15872k - BOARDNAME := EAP120 - TPLINK_BOARD_ID := EAP120 - DEVICE_PROFILE := EAP120 - LOADER_TYPE := elf - KERNEL := kernel-bin | patch-cmdline | lzma | loader-kernel - IMAGES := sysupgrade.bin factory.bin - IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade - IMAGE/factory.bin := append-rootfs | tplink-safeloader factory -endef -TARGET_DEVICES += eap120-v1 - -define Device/re355-v1 - $(Device/tplink-safeloader) - DEVICE_TITLE := TP-LINK RE355 v1 - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct - MTDPARTS := spi0.0:128k(u-boot)ro,6016k(firmware),64k(partition-table)ro,64k(product-info)ro,1856k(config)ro,64k(art)ro - IMAGE_SIZE := 7936k - BOARDNAME := RE355 - TPLINK_BOARD_ID := RE355 - DEVICE_PROFILE := RE355 - TPLINK_HWID := 0x0 - TPLINK_HWREV := 0 - KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header -O - KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | tplink-v1-header -endef -TARGET_DEVICES += re355-v1 - -define Device/re450-v1 - $(Device/tplink-safeloader) - DEVICE_TITLE := TP-LINK RE450 v1 - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct - MTDPARTS := spi0.0:128k(u-boot)ro,6016k(firmware),64k(partition-table)ro,64k(product-info)ro,1856k(config)ro,64k(art)ro - IMAGE_SIZE := 7936k - BOARDNAME := RE450 - TPLINK_BOARD_ID := RE450 - DEVICE_PROFILE := RE450 - TPLINK_HWID := 0x0 - TPLINK_HWREV := 0 - KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header -O - KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | tplink-v1-header -endef -TARGET_DEVICES += re450-v1 - -define Device/tl-mr6400-v1 - $(Device/tplink-8mlzma) - DEVICE_TITLE := TP-LINK TL-MR6400 v1 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-net kmod-usb-net-rndis kmod-usb-serial kmod-usb-serial-option adb-enablemodem - BOARDNAME := TL-MR6400 - DEVICE_PROFILE := TLMR6400 - TPLINK_HWID := 0x64000001 -endef -TARGET_DEVICES += tl-mr6400-v1 - -define Device/tl-wdr3500-v1 - $(Device/tplink-8mlzma) - DEVICE_TITLE := TP-LINK TL-WDR3500 v1 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := TL-WDR3500 - DEVICE_PROFILE := TLWDR4300 - TPLINK_HWID := 0x35000001 -endef -TARGET_DEVICES += tl-wdr3500-v1 - -define Device/tl-wdr3600-v1 - $(Device/tl-wdr3500-v1) - DEVICE_TITLE := TP-LINK TL-WDR3600 v1 - BOARDNAME := TL-WDR4300 - TPLINK_HWID := 0x36000001 - IMAGE/factory.bin := append-rootfs | mktplinkfw factory -C US -endef -TARGET_DEVICES += tl-wdr3600-v1 - -define Device/tl-wdr4300-v1 - $(Device/tl-wdr3600-v1) - DEVICE_TITLE := TP-LINK TL-WDR4300 v1 - TPLINK_HWID := 0x43000001 -endef -TARGET_DEVICES += tl-wdr4300-v1 - -define Device/tl-wdr4300-v1-il - $(Device/tl-wdr3500-v1) - DEVICE_TITLE := TP-LINK TL-WDR4300 v1 (IL) - BOARDNAME := TL-WDR4300 - TPLINK_HWID := 0x43008001 -endef -TARGET_DEVICES += tl-wdr4300-v1-il - -define Device/tl-wdr4310-v1 - $(Device/tl-wdr4300-v1-il) - DEVICE_TITLE := TP-LINK TL-WDR4310 v1 - TPLINK_HWID := 0x43100001 -endef -TARGET_DEVICES += tl-wdr4310-v1 - -define Device/tl-wdr4900-v2 - $(Device/tplink-8mlzma) - DEVICE_TITLE := TP-LINK TL-WDR4900 v2 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := TL-WDR4900-v2 - DEVICE_PROFILE := TLWDR4900V2 - TPLINK_HWID := 0x49000002 -endef -TARGET_DEVICES += tl-wdr4900-v2 - -define Device/tl-wdr6500-v2 - $(Device/tplink-8mlzma) - DEVICE_TITLE := TP-LINK TL-WDR6500 v2 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct - KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma - KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | uImage lzma | tplink-v1-header - BOARDNAME := TL-WDR6500-v2 - DEVICE_PROFILE := TLWDR6500V2 - TPLINK_HWID := 0x65000002 - TPLINK_HEADER_VERSION := 2 -endef -TARGET_DEVICES += tl-wdr6500-v2 - -define Device/mw4530r-v1 - $(Device/tl-wdr4300-v1) - DEVICE_TITLE := Mercury MW4530R v1 - TPLINK_HWID := 0x45300001 -endef -TARGET_DEVICES += mw4530r-v1 - -define Device/tl-wpa8630-v1 - $(Device/tplink-8mlzma) - DEVICE_TITLE := TP-LINK TL-WPA8630 v1 - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct - BOARDNAME := TL-WPA8630 - DEVICE_PROFILE := TL-WPA8630 - TPLINK_HWID := 0x86300001 -endef -TARGET_DEVICES += tl-wpa8630-v1 - -define Device/tl-wr1043n-v5 - $(Device/archer-cxx) - DEVICE_TITLE := TP-LINK TL-WR1043N v5 - BOARDNAME := TL-WR1043N-v5 - SUPPORTED_DEVICES := tl-wr1043n-v5 - DEVICE_PROFILE := TLWR1043 - MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,15104k(firmware),128k(product-info)ro,640k(config)ro,64k(partition-table)ro,128k(logs)ro,64k(art)ro - IMAGE_SIZE := 15104k - TPLINK_BOARD_ID := TLWR1043NV5 -endef -TARGET_DEVICES += tl-wr1043n-v5 - -define Device/tl-wr1043nd-v1 - $(Device/tplink-8m) - DEVICE_TITLE := TP-LINK TL-WR1043N/ND v1 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := TL-WR1043ND - DEVICE_PROFILE := TLWR1043 - TPLINK_HWID := 0x10430001 -endef -TARGET_DEVICES += tl-wr1043nd-v1 - -define Device/tl-wr1043nd-v2 - $(Device/tplink-8mlzma) - DEVICE_TITLE := TP-LINK TL-WR1043N/ND v2 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := TL-WR1043ND-v2 - DEVICE_PROFILE := TLWR1043 - TPLINK_HWID := 0x10430002 -endef -TARGET_DEVICES += tl-wr1043nd-v2 - -define Device/tl-wr1043nd-v3 - $(Device/tl-wr1043nd-v2) - DEVICE_TITLE := TP-LINK TL-WR1043N/ND v3 - TPLINK_HWID := 0x10430003 -endef -TARGET_DEVICES += tl-wr1043nd-v3 - -define Device/tl-wr1043nd-v4 - $(Device/tplink-safeloader) - DEVICE_TITLE := TP-LINK TL-WR1043N/ND v4 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := TL-WR1043ND-v4 - DEVICE_PROFILE := TLWR1043 - TPLINK_HWID := 0x10430004 - MTDPARTS := spi0.0:128k(u-boot)ro,15552k(firmware),128k(product-info)ro,320k(config)ro,64k(partition-table)ro,128k(logs)ro,64k(ART)ro - IMAGE_SIZE := 15552k - TPLINK_BOARD_ID := TLWR1043NDV4 - KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header -O - KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | tplink-v1-header -endef -TARGET_DEVICES += tl-wr1043nd-v4 - -define Device/tl-wr2543-v1 - $(Device/tplink-8mlzma) - DEVICE_TITLE := TP-LINK TL-WR2543N/ND v1 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := TL-WR2543N - DEVICE_PROFILE := TLWR2543 - TPLINK_HWID := 0x25430001 - IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -v 3.13.99 - IMAGE/factory.bin := append-rootfs | mktplinkfw factory -v 3.13.99 -endef -TARGET_DEVICES += tl-wr2543-v1 - -define Device/tl-wr710n-v1 - $(Device/tplink-8mlzma) - DEVICE_TITLE := TP-LINK TL-WR710N v1 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := TL-WR710N - DEVICE_PROFILE := TLWR710 - TPLINK_HWID := 0x07100001 - CONSOLE := ttyATH0,115200 - IMAGE/factory.bin := append-rootfs | mktplinkfw factory -C US -endef -TARGET_DEVICES += tl-wr710n-v1 - -define Device/tl-wr710n-v2.1 - $(Device/tl-wr710n-v1) - DEVICE_TITLE := TP-LINK TL-WR710N v2.1 - TPLINK_HWID := 0x07100002 - TPLINK_HWREV := 0x00000002 -endef -TARGET_DEVICES += tl-wr710n-v2.1 - -define Device/tl-wr810n-v1 - $(Device/tplink-8mlzma) - DEVICE_TITLE := TP-LINK TL-WR810N v1 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := TL-WR810N - DEVICE_PROFILE := TLWR810 - TPLINK_HWID := 0x08100001 -endef -TARGET_DEVICES += tl-wr810n-v1 - -define Device/tl-wr810n-v2 - $(Device/tplink-8mlzma) - DEVICE_TITLE := TP-LINK TL-WR810N v2 - BOARDNAME := TL-WR810N-v2 - DEVICE_PROFILE := TLWR810 - TPLINK_HWID := 0x08100002 -endef -TARGET_DEVICES += tl-wr810n-v2 - -define Device/tl-wr842n-v1 - $(Device/tplink-8m) - DEVICE_TITLE := TP-LINK TL-WR842N/ND v1 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := TL-MR3420 - DEVICE_PROFILE := TLWR842 - TPLINK_HWID := 0x08420001 -endef -TARGET_DEVICES += tl-wr842n-v1 - -define Device/tl-wr842n-v2 - $(Device/tplink-8mlzma) - DEVICE_TITLE := TP-LINK TL-WR842N/ND v2 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := TL-WR842N-v2 - DEVICE_PROFILE := TLWR842 - TPLINK_HWID := 0x8420002 -endef -TARGET_DEVICES += tl-wr842n-v2 - -define Device/tl-wr842n-v3 - $(Device/tplink-16mlzma) - DEVICE_TITLE := TP-LINK TL-WR842N/ND v3 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := TL-WR842N-v3 - DEVICE_PROFILE := TLWR842 - TPLINK_HWID := 0x08420003 -endef -TARGET_DEVICES += tl-wr842n-v3 - -define Device/tl-wr902ac-v1 - $(Device/tplink-safeloader) - DEVICE_TITLE := TP-LINK TL-WR902AC v1 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport \ - kmod-ath10k-ct ath10k-firmware-qca9887-ct -swconfig -uboot-envtools - BOARDNAME := TL-WR902AC-V1 - DEVICE_PROFILE := TLWR902 - TPLINK_BOARD_ID := TL-WR902AC-V1 - TPLINK_HWID := 0x0 - TPLINK_HWREV := 0 - SUPPORTED_DEVICES := tl-wr902ac-v1 - IMAGE_SIZE := 7360k - MTDPARTS := spi0.0:128k(u-boot)ro,7360k(firmware),640k(tplink)ro,64k(art)ro - KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header -O - KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | tplink-v1-header -endef -TARGET_DEVICES += tl-wr902ac-v1 - -define Device/tl-wr942n-v1 - $(Device/archer-cxx) - DEVICE_TITLE := TP-LINK TL-WR942N v1 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := TL-WR942N-V1 - TPLINK_BOARD_ID := TLWR942NV1 - DEVICE_PROFILE := TLWR942 - IMAGE_SIZE := 14464k - MTDPARTS := spi0.0:128k(u-boot)ro,14464k(firmware),64k(product-info)ro,64k(partition-table)ro,256k(oem-config)ro,1344k(oem-vars)ro,64k(ART)ro - SUPPORTED_DEVICES := tl-wr942n-v1 -endef -TARGET_DEVICES += tl-wr942n-v1 diff --git a/target/linux/ar71xx/image/generic-ubnt.mk b/target/linux/ar71xx/image/generic-ubnt.mk deleted file mode 100644 index 539f0d82b3..0000000000 --- a/target/linux/ar71xx/image/generic-ubnt.mk +++ /dev/null @@ -1,319 +0,0 @@ -DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE UBNT_VERSION UBNT_REVISION - -# On M (XW) devices the U-Boot as of version 1.1.4-s1039 doesn't like -# VERSION_DIST being on the place of major(?) version number, so we need to -# use some number. -UBNT_REVISION := $(VERSION_DIST)-$(REVISION) - -# mkubntimage is using the kernel image direct -# routerboard creates partitions out of the ubnt header -define Build/mkubntimage - -$(STAGING_DIR_HOST)/bin/mkfwimage \ - -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \ - -k $(IMAGE_KERNEL) \ - -r $@ \ - -o $@ -endef - -# all UBNT XM device expect the kernel image to have 1024k while flash, when -# booting the image, the size doesn't matter. -define Build/mkubntimage-split - -[ -f $@ ] && ( \ - dd if=$@ of=$@.old1 bs=1024k count=1; \ - dd if=$@ of=$@.old2 bs=1024k skip=1; \ - $(STAGING_DIR_HOST)/bin/mkfwimage \ - -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v$(UBNT_VERSION)-$(UBNT_REVISION) \ - -k $@.old1 \ - -r $@.old2 \ - -o $@; \ - rm $@.old1 $@.old2 ) -endef - -define Build/mkubntimage2 - -$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \ - -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \ - -p jffs2:0x50000:0xf60000:0:0:$@ \ - -o $@.new - @mv $@.new $@ -endef - - -# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM) -# UBNT_TYPE e.g. one of (BZ, XM, XW) -# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x) -# UBNT_VERSION e.g. one of (6.0.0, 8.5.0) -define Device/ubnt - DEVICE_PACKAGES := kmod-usb2 - DEVICE_PROFILE := UBNT - IMAGE_SIZE := 7552k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro - UBNT_BOARD := XM - UBNT_VERSION := 6.0.0 - IMAGES := sysupgrade.bin factory.bin - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) - IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split -endef - -define Device/ubnt-xm - $(Device/ubnt) - DEVICE_PACKAGES += kmod-usb-ohci - UBNT_TYPE := XM - UBNT_CHIP := ar7240 - KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma | uImage lzma -endef - -define Device/ubnt-xw - $(Device/ubnt) - UBNT_TYPE := XW - UBNT_CHIP := ar934x - UBNT_VERSION := 6.0.4 - UBNT_REVISION := 42.$(UBNT_REVISION) -endef - -define Device/ubnt-bz - $(Device/ubnt) - UBNT_TYPE := BZ - UBNT_CHIP := ar7240 -endef - -define Device/rw2458n - $(Device/ubnt-xm) - DEVICE_TITLE := Ubiquiti RW2458N - BOARDNAME := RW2458N -endef -TARGET_DEVICES += rw2458n - -define Device/ubnt-airrouter - $(Device/ubnt-xm) - DEVICE_TITLE := Ubiquiti AirRouter - BOARDNAME := UBNT-AR -endef -TARGET_DEVICES += ubnt-airrouter - -define Device/ubnt-bullet-m - $(Device/ubnt-xm) - DEVICE_TITLE := Ubiquiti Bullet-M - DEVICE_PACKAGES += rssileds - BOARDNAME := UBNT-BM -endef -TARGET_DEVICES += ubnt-bullet-m - -define Device/ubnt-rocket-m - $(Device/ubnt-xm) - DEVICE_TITLE := Ubiquiti Rocket-M - DEVICE_PACKAGES += rssileds - BOARDNAME := UBNT-RM -endef -TARGET_DEVICES += ubnt-rocket-m - -define Device/ubnt-nano-m - $(Device/ubnt-xm) - DEVICE_TITLE := Ubiquiti Nano-M - DEVICE_PACKAGES += rssileds - BOARDNAME := UBNT-NM -endef -TARGET_DEVICES += ubnt-nano-m - -define Device/ubnt-unifi - $(Device/ubnt-bz) - DEVICE_TITLE := Ubiquiti UniFi - BOARDNAME := UBNT-UF - DEVICE_PROFILE += UBNTUNIFI -endef -TARGET_DEVICES += ubnt-unifi - -define Device/ubnt-unifiac - DEVICE_PACKAGES := kmod-usb2 - DEVICE_PROFILE := UBNT - IMAGE_SIZE := 7744k - MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs),256k(cfg)ro,64k(EEPROM)ro - IMAGES := sysupgrade.bin - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) -endef - -define Device/ubnt-unifiac-lite - $(Device/ubnt-unifiac) - DEVICE_TITLE := Ubiquiti UniFi AC-Lite - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct - DEVICE_PROFILE += UBNTUNIFIACLITE - BOARDNAME := UBNT-UF-AC-LITE -endef -TARGET_DEVICES += ubnt-unifiac-lite - -define Device/ubnt-unifiac-lr - $(Device/ubnt-unifiac-lite) - DEVICE_TITLE := Ubiquiti UniFi AC-LR -endef -TARGET_DEVICES += ubnt-unifiac-lr - -define Device/ubnt-unifiac-mesh - $(Device/ubnt-unifiac-lite) - DEVICE_TITLE := Ubiquiti UniFi AC-Mesh -endef -TARGET_DEVICES += ubnt-unifiac-mesh - -define Device/ubnt-unifiac-pro - $(Device/ubnt-unifiac) - DEVICE_TITLE := Ubiquiti UniFi AC-Pro - DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct - DEVICE_PROFILE += UBNTUNIFIACPRO - BOARDNAME := UBNT-UF-AC-PRO -endef -TARGET_DEVICES += ubnt-unifiac-pro - -define Device/ubnt-unifiac-mesh-pro - $(Device/ubnt-unifiac-pro) - DEVICE_TITLE := Ubiquiti UniFi AC-Mesh-Pro -endef -TARGET_DEVICES += ubnt-unifiac-mesh-pro - -define Device/ubnt-unifi-outdoor - $(Device/ubnt-bz) - DEVICE_TITLE := Ubiquiti UniFi Outdoor - BOARDNAME := UBNT-U20 - DEVICE_PROFILE += UBNTUNIFIOUTDOOR -endef -TARGET_DEVICES += ubnt-unifi-outdoor - -define Device/ubnt-nano-m-xw - $(Device/ubnt-xw) - DEVICE_TITLE := Ubiquiti Nano M XW - DEVICE_PACKAGES += rssileds - BOARDNAME := UBNT-NM-XW -endef -TARGET_DEVICES += ubnt-nano-m-xw - -define Device/ubnt-lbe-m5 - $(Device/ubnt-xw) - DEVICE_TITLE := Ubiquiti Litebeam M5 - BOARDNAME := UBNT-LBE-M5 -endef -TARGET_DEVICES += ubnt-lbe-m5 - -define Device/ubnt-loco-m-xw - $(Device/ubnt-xw) - DEVICE_TITLE := Ubiquiti Loco XW - DEVICE_PACKAGES += rssileds - BOARDNAME := UBNT-LOCO-XW -endef -TARGET_DEVICES += ubnt-loco-m-xw - -define Device/ubnt-bullet-m-xw - $(Device/ubnt-xw) - DEVICE_TITLE := Ubiquiti Bullet-M XW - DEVICE_PACKAGES += rssileds - BOARDNAME := UBNT-BM-XW -endef -TARGET_DEVICES += ubnt-bullet-m-xw - -define Device/ubnt-rocket-m-xw - $(Device/ubnt-xw) - DEVICE_TITLE := Ubiquiti Rocket M XW - DEVICE_PACKAGES += rssileds - BOARDNAME := UBNT-RM-XW -endef -TARGET_DEVICES += ubnt-rocket-m-xw - -define Device/ubnt-rocket-m-ti - $(Device/ubnt-xw) - DEVICE_TITLE := Ubiquiti Rocket M TI - DEVICE_PACKAGES += rssileds - BOARDNAME := UBNT-RM-TI - UBNT_TYPE := TI -endef -TARGET_DEVICES += ubnt-rocket-m-ti - -define Device/ubnt-air-gateway - $(Device/ubnt-xm) - DEVICE_TITLE := Ubiquiti Air Gateway - BOARDNAME := UBNT-AGW - UBNT_TYPE := AirGW - UBNT_CHIP := ar933x - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += ubnt-air-gateway - -define Device/ubnt-air-gateway-pro - $(Device/ubnt-xm) - DEVICE_TITLE := Ubiquiti Air Gateway Pro - BOARDNAME := UBNT-AGWP - UBNT_TYPE := AirGWP - UBNT_CHIP := ar934x -endef -TARGET_DEVICES += ubnt-air-gateway-pro - -define Device/ubdev01 - $(Device/ubnt-xm) - DEVICE_TITLE := Ubiquiti ubDEV01 - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro - BOARDNAME := UBNT-UF - UBNT_BOARD := UBDEV01 -endef -TARGET_DEVICES += ubdev01 - -define Device/ubnt-routerstation - DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 - DEVICE_PROFILE := UBNT - IMAGE_SIZE := 16128k - IMAGES := sysupgrade.bin factory.bin - IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage - IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE) - KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE) -endef - -define Device/ubnt-rs - $(Device/ubnt-routerstation) - DEVICE_TITLE := Ubiquiti RouterStation - BOARDNAME := UBNT-RS - DEVICE_PROFILE += UBNTRS - UBNT_BOARD := RS - UBNT_TYPE := RSx - UBNT_CHIP := ar7100 -endef -TARGET_DEVICES += ubnt-rs - -define Device/ubnt-rspro - $(Device/ubnt-routerstation) - DEVICE_TITLE := Ubiquiti RouterStation Pro - BOARDNAME := UBNT-RSPRO - DEVICE_PROFILE += UBNTRSPRO - UBNT_BOARD := RSPRO - UBNT_TYPE := RSPRO - UBNT_CHIP := ar7100pro -endef -TARGET_DEVICES += ubnt-rspro - -define Device/ubnt-ls-sr71 - $(Device/ubnt-routerstation) - DEVICE_TITLE := Ubiquiti LS-SR71 - BOARDNAME := UBNT-LS-SR71 - UBNT_BOARD := LS-SR71 - UBNT_TYPE := LS-SR71 - UBNT_CHIP := ar7100 -endef -TARGET_DEVICES += ubnt-ls-sr71 - -define Device/ubnt-uap-pro - DEVICE_TITLE := Ubiquiti UAP Pro - KERNEL_SIZE := 2048k - IMAGE_SIZE := 15744k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2048k(kernel),13696k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware) - UBNT_TYPE := BZ - UBNT_CHIP := ar934x - BOARDNAME := UAP-PRO - DEVICE_PROFILE := UBNT UAPPRO - KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0 - IMAGES := sysupgrade.bin factory.bin - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) - IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2 -endef -TARGET_DEVICES += ubnt-uap-pro - -define Device/ubnt-unifi-outdoor-plus - $(Device/ubnt-uap-pro) - DEVICE_TITLE := Ubiquiti UniFi Outdoor Plus - UBNT_CHIP := ar7240 - BOARDNAME := UBNT-UOP - DEVICE_PROFILE := UBNT -endef -TARGET_DEVICES += ubnt-unifi-outdoor-plus diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk deleted file mode 100644 index 27e2a5fc22..0000000000 --- a/target/linux/ar71xx/image/generic.mk +++ /dev/null @@ -1,1352 +0,0 @@ -DEVICE_VARS += DAP_SIGNATURE NETGEAR_BOARD_ID NETGEAR_HW_ID NETGEAR_KERNEL_MAGIC ROOTFS_SIZE -DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK - -define Build/alfa-network-rootfs-header - mkimage \ - -A mips -O linux -T filesystem -C lzma -a 0 -e 0 \ - -n 'RootfsImage' -d $@ $@.new - @mv $@.new $@ -endef - -define Build/append-md5sum-bin - $(STAGING_DIR_HOST)/bin/mkhash md5 $@ | sed 's/../\\\\x&/g' |\ - xargs echo -ne >> $@ -endef - -define Build/mkwrggimg - $(STAGING_DIR_HOST)/bin/mkwrggimg -b \ - -i $@ -o $@.imghdr -d /dev/mtdblock/1 \ - -m $(BOARDNAME) -s $(DAP_SIGNATURE) \ - -v $(VERSION_DIST) -B $(REVISION) - mv $@.imghdr $@ -endef - -define Build/mkdapimg2 - $(STAGING_DIR_HOST)/bin/mkdapimg2 \ - -i $@ -o $@.new \ - -s $(DAP_SIGNATURE) \ - -v $(VERSION_DIST)-$(firstword $(subst +, ,$(firstword $(subst -, ,$(REVISION))))) \ - -r Default \ - $(if $(1),-k $(1)) - mv $@.new $@ -endef - -define Build/netgear-squashfs - rm -rf $@.fs $@.squashfs - mkdir -p $@.fs/image - cp $@ $@.fs/image/uImage - $(STAGING_DIR_HOST)/bin/mksquashfs-lzma \ - $@.fs $@.squashfs \ - -noappend -root-owned -be -b 65536 \ - $(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH)) - - dd if=/dev/zero bs=1k count=1 >> $@.squashfs - mkimage \ - -A mips -O linux -T filesystem -C none \ - -M $(NETGEAR_KERNEL_MAGIC) \ - -a 0xbf070000 -e 0xbf070000 \ - -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \ - -d $@.squashfs $@ - rm -rf $@.squashfs $@.fs -endef - -define Build/netgear-uImage - $(call Build/uImage,$(1) -M $(NETGEAR_KERNEL_MAGIC)) -endef - -define Build/relocate-kernel - rm -rf $@.relocate - $(CP) ../../generic/image/relocate $@.relocate - $(MAKE) -j1 -C $@.relocate KERNEL_ADDR=$(KERNEL_LOADADDR) CROSS_COMPILE=$(TARGET_CROSS) - ( \ - dd if=$@.relocate/loader.bin bs=32 conv=sync && \ - perl -e '@s = stat("$@"); print pack("N", @s[7])' && \ - cat "$@" \ - ) > "$@.new" - mv "$@.new" "$@" - rm -rf $@.relocate -endef - -define Build/teltonika-fw-fake-checksum - # Teltonika U-Boot web based firmware upgrade/recovery routine compares - # 16 bytes from md5sum1[16] field in TP-Link v1 header (offset: 76 bytes - # from begin of the firmware file) with 16 bytes stored just before - # 0xdeadc0de marker. Values are only compared, MD5 sum is not verified. - let \ - offs="$$(stat -c%s $@) - 20"; \ - dd if=$@ bs=1 count=16 skip=76 |\ - dd of=$@ bs=1 count=16 seek=$$offs conv=notrunc -endef - -define Build/uImageHiWiFi - # Field ih_name needs to start with "tw150v1" - mkimage -A $(LINUX_KARCH) \ - -O linux -T kernel \ - -C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \ - -n 'tw150v1 $(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION)' -d $@ $@.new - @mv $@.new $@ -endef - -define Build/wrgg-pad-rootfs - $(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 64 >>$@ -endef - - -define Device/ap121f - DEVICE_TITLE := ALFA Network AP121F - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage -swconfig - BOARDNAME := AP121F - IMAGE_SIZE := 16064k - CONSOLE := ttyATH0,115200 - MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware) - SUPPORTED_DEVICES := ap121f - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ - append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += ap121f - -define Device/ap531b0 - DEVICE_TITLE := Rockeetech AP531B0 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := AP531B0 - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += ap531b0 - -define Device/ap90q - DEVICE_TITLE := YunCore AP80Q/AP90Q - BOARDNAME := AP90Q - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += ap90q - -define Device/ap91-5g - DEVICE_TITLE := ALFA Network AP91-5G - DEVICE_PACKAGES := rssileds -swconfig - BOARDNAME := AP91-5G - IMAGE_SIZE := 7744k - KERNEL_SIZE := 1600k - ROOTFS_SIZE := 6144k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),6144k(rootfs),1600k(kernel),64k(config)ro,64k(art)ro,7744k@0x50000(firmware) - IMAGES := sysupgrade.bin factory.bin - IMAGE/factory.bin := append-rootfs | pad-rootfs |\ - alfa-network-rootfs-header | append-kernel | check-size $$$$(IMAGE_SIZE) - IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs |\ - pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE) -endef - -define Device/arduino-yun - DEVICE_TITLE := Arduino Yun - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := Yun - IMAGE_SIZE := 15936k - CONSOLE := ttyATH0,250000 - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15936k(firmware),64k(nvram),64k(art)ro -endef -TARGET_DEVICES += arduino-yun - -define Device/bsb - DEVICE_TITLE := Smart Electronics Black Swift board - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := BSB - IMAGE_SIZE := 16000k - CONSOLE := ttyATH0,115200 - MTDPARTS := spi0.0:128k(u-boot)ro,64k(u-boot-env)ro,16128k(firmware),64k(art)ro -endef -TARGET_DEVICES += bsb - -define Device/carambola2 - DEVICE_TITLE := 8devices Carambola2 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := CARAMBOLA2 - IMAGE_SIZE := 16000k - CONSOLE := ttyATH0,115200 - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += carambola2 - -define Device/cf-e316n-v2 - DEVICE_TITLE := COMFAST CF-E316N v2 - DEVICE_PACKAGES := -swconfig -uboot-envtools - BOARDNAME := CF-E316N-V2 - IMAGE_SIZE := 16192k - MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro -endef -TARGET_DEVICES += cf-e316n-v2 - -define Device/cf-e320n-v2 - $(Device/cf-e316n-v2) - DEVICE_TITLE := COMFAST CF-E320N v2 - DEVICE_PACKAGES += kmod-usb2 - BOARDNAME := CF-E320N-V2 -endef -TARGET_DEVICES += cf-e320n-v2 - -define Device/cf-e355ac-v1 - DEVICE_TITLE := COMFAST CF-E355AC v1 - DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct \ - -swconfig -uboot-envtools - BOARDNAME := CF-E355AC-V1 - IMAGE_SIZE := 16192k - MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro -endef -TARGET_DEVICES += cf-e355ac-v1 - -define Device/cf-e355ac-v2 - $(Device/cf-e355ac-v1) - DEVICE_TITLE := COMFAST CF-E355AC v2 - DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct \ - -swconfig -uboot-envtools - BOARDNAME := CF-E355AC-V2 -endef -TARGET_DEVICES += cf-e355ac-v2 - -define Device/cf-e375ac - DEVICE_TITLE := COMFAST CF-E375AC - DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct \ - -uboot-envtools - BOARDNAME := CF-E375AC - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro -endef -TARGET_DEVICES += cf-e375ac - -define Device/cf-e380ac-v1 - DEVICE_TITLE := COMFAST CF-E380AC v1 - DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct \ - -swconfig -uboot-envtools - BOARDNAME := CF-E380AC-V1 - IMAGE_SIZE := 16128k - MTDPARTS := spi0.0:128k(u-boot)ro,64k(art)ro,16128k(firmware),64k(art-backup)ro -endef -TARGET_DEVICES += cf-e380ac-v1 - -define Device/cf-e380ac-v2 - $(Device/cf-e380ac-v1) - DEVICE_TITLE := COMFAST CF-E380AC v2 - BOARDNAME := CF-E380AC-V2 - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro -endef -TARGET_DEVICES += cf-e380ac-v2 - -define Device/cf-e385ac - DEVICE_TITLE := COMFAST CF-E385AC - DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9984-ct \ - -uboot-envtools - BOARDNAME := CF-E385AC - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro -endef -TARGET_DEVICES += cf-e385ac - -define Device/cf-e520n - DEVICE_TITLE := COMFAST CF-E520N - DEVICE_PACKAGES := kmod-usb2 -swconfig -uboot-envtools - BOARDNAME := CF-E520N - IMAGE_SIZE := 8000k - MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,8000k(firmware),64k(art-backup)ro -endef -TARGET_DEVICES += cf-e520n - -define Device/cf-e530n - $(Device/cf-e520n) - DEVICE_TITLE := COMFAST CF-E530N - BOARDNAME := CF-E530N -endef -TARGET_DEVICES += cf-e530n - -define Device/cpe505n - DEVICE_TITLE := P&W CPE505N - BOARDNAME := CPE505N - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += cpe505n - -define Device/cpe830 - $(Device/ap90q) - DEVICE_TITLE := YunCore CPE830 - DEVICE_PACKAGES := rssileds - BOARDNAME := CPE830 -endef -TARGET_DEVICES += cpe830 - -define Device/cpe870 - DEVICE_TITLE := YunCore CPE870 - DEVICE_PACKAGES := rssileds - BOARDNAME := CPE870 - IMAGE_SIZE := 7936k - MTDPARTS := spi0.0:64k(u-boot)ro,64k(u-boot-env),7936k(firmware),64k(config)ro,64k(art)ro -endef -TARGET_DEVICES += cpe870 - -define Device/dragino2 - BOARDNAME := DRAGINO2 - CONSOLE := ttyATH0,115200 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - DEVICE_TITLE := Dragino 2 (MS14) - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:256k(u-boot)ro,16000k(firmware),64k(config)ro,64k(art)ro -endef -TARGET_DEVICES += dragino2 - -define Device/e1700ac-v2-16M - DEVICE_TITLE := Qxwlan E1700AC v2 (16MB flash) - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct \ - kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := E1700AC-V2 - SUPPORTED_DEVICES := e1700ac-v2 - IMAGE_SIZE := 15936k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art)ro,-(firmware) - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ - append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += e1700ac-v2-16M - -define Device/e1700ac-v2-8M - $(Device/e1700ac-v2-16M) - DEVICE_TITLE := Qxwlan E1700AC v2 (8MB flash) - IMAGE_SIZE := 7744k -endef -TARGET_DEVICES += e1700ac-v2-8M - -define Device/e558-v2-16M - DEVICE_TITLE := Qxwlan E558 v2 (16MB flash) - DEVICE_PACKAGES := kmod-usb2 -swconfig - BOARDNAME := E558-V2 - SUPPORTED_DEVICES := e558-v2 - IMAGE_SIZE := 15936k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art),-(firmware) - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ - append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += e558-v2-16M - -define Device/e558-v2-8M - $(Device/e558-v2-16M) - DEVICE_TITLE := Qxwlan E558 v2 (8MB flash) - IMAGE_SIZE := 7744k -endef -TARGET_DEVICES += e558-v2-8M - -define Device/e600g-v2-16M - DEVICE_TITLE := Qxwlan E600G v2 (16MB flash) - DEVICE_PACKAGES := kmod-usb2 -swconfig - BOARDNAME := E600G-V2 - SUPPORTED_DEVICES := e600g-v2 - IMAGE_SIZE := 15936k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art)ro,-(firmware) - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ - append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += e600g-v2-16M - -define Device/e600g-v2-8M - $(Device/e600g-v2-16M) - DEVICE_TITLE := Qxwlan E600G v2 (8MB flash) - IMAGE_SIZE := 7744k -endef -TARGET_DEVICES += e600g-v2-8M - -define Device/e600gac-v2-16M - DEVICE_TITLE := Qxwlan E600GAC v2 (16MB flash) - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct \ - kmod-usb2 -swconfig - BOARDNAME := E600GAC-V2 - SUPPORTED_DEVICES := e600gac-v2 - IMAGE_SIZE := 15936k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art)ro,-(firmware) - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ - append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += e600gac-v2-16M - -define Device/e600gac-v2-8M - $(Device/e600gac-v2-16M) - DEVICE_TITLE := Qxwlan E600GAC v2 (8MB flash) - IMAGE_SIZE := 7744k -endef -TARGET_DEVICES += e600gac-v2-8M - -define Device/e750a-v4-16M - DEVICE_TITLE := Qxwlan E750A v4 (16MB flash) - DEVICE_PACKAGES := kmod-usb2 -swconfig - BOARDNAME := E750A-V4 - SUPPORTED_DEVICES := e750a-v4 - IMAGE_SIZE := 15936k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art),-(firmware) - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ - append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += e750a-v4-16M - -define Device/e750a-v4-8M - $(Device/e750a-v4-16M) - DEVICE_TITLE := Qxwlan E750A v4 (8MB flash) - IMAGE_SIZE := 7744k -endef -TARGET_DEVICES += e750a-v4-8M - -define Device/e750g-v8-16M - DEVICE_TITLE := Qxwlan E750G v8 (16MB flash) - DEVICE_PACKAGES := kmod-usb2 -swconfig - BOARDNAME := E750G-V8 - SUPPORTED_DEVICES := e750g-v8 - IMAGE_SIZE := 15936k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art),-(firmware) - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ - append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += e750g-v8-16M - -define Device/e750g-v8-8M - $(Device/e750g-v8-16M) - DEVICE_TITLE := Qxwlan E750G v8 (8MB flash) - IMAGE_SIZE := 7744k -endef -TARGET_DEVICES += e750g-v8-8M - -define Device/ew-balin - DEVICE_TITLE := Embedded Wireless Balin Platform - DEVICE_PACKAGES := kmod-usb-chipidea - BOARDNAME := EW-BALIN - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += ew-balin - -define Device/ew-dorin - $(Device/ew-balin) - DEVICE_TITLE := Embedded Wireless Dorin Platform - BOARDNAME := EW-DORIN - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += ew-dorin - -define Device/ew-dorin-router - $(Device/ew-dorin) - DEVICE_TITLE := Embedded Wireless Dorin Router Platform - BOARDNAME := EW-DORIN-ROUTER -endef -TARGET_DEVICES += ew-dorin-router - -define Device/rme-eg200 - DEVICE_TITLE := eTactica EG-200 - DEVICE_PACKAGES := kmod-usb2 kmod-ledtrig-oneshot \ - kmod-usb-serial kmod-usb-serial-ftdi \ - kmod-usb-storage \ - kmod-fs-ext4 - BOARDNAME := RME-EG200 - IMAGE_SIZE := 16000k - CONSOLE := ttyATH0,115200 - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += rme-eg200 - -define Device/weio - DEVICE_TITLE := WeIO - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := WEIO - IMAGE_SIZE := 16000k - CONSOLE := ttyATH0,115200 - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += weio - -define Device/gl-ar150 - DEVICE_TITLE := GL.iNet GL-AR150 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := GL-AR150 - IMAGE_SIZE := 16000k - CONSOLE := ttyATH0,115200 - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += gl-ar150 - -define Device/gl-ar300 - DEVICE_TITLE := GL.iNet GL-AR300 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := GL-AR300 - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += gl-ar300 - -define Device/gl-ar300m - DEVICE_TITLE := GL.iNet GL-AR300M - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := GL-AR300M - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += gl-ar300m - -define Device/gl-ar750 - DEVICE_TITLE := GL.iNet GL-AR750 - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct \ - kmod-usb2 kmod-usb-storage - BOARDNAME := GL-AR750 - SUPPORTED_DEVICES := gl-ar750 - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware) - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ - append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += gl-ar750 - -define Device/gl-ar750s - DEVICE_TITLE := GL.iNet GL-AR750S - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct \ - kmod-usb2 kmod-usb-storage - BOARDNAME := GL-AR750S - SUPPORTED_DEVICES := gl-ar750s - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware) - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ - append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += gl-ar750s - -define Device/gl-domino - DEVICE_TITLE := GL.iNet Domino Pi - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := DOMINO - IMAGE_SIZE := 16000k - CONSOLE := ttyATH0,115200 - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += gl-domino - -define Device/gl-mifi - DEVICE_TITLE := GL.iNet GL-MiFi - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := GL-MIFI - IMAGE_SIZE := 16000k - CONSOLE := ttyATH0,115200 - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += gl-mifi - -define Device/gl-usb150 - DEVICE_TITLE := GL.iNet GL-USB150 - DEVICE_PACKAGES := -swconfig - BOARDNAME := GL-USB150 - IMAGE_SIZE := 16000k - CONSOLE := ttyATH0,115200 - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro - SUPPORTED_DEVICES := gl-usb150 - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ - append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += gl-usb150 - -define Device/lan-turtle - $(Device/tplink-16mlzma) - DEVICE_TITLE := Hak5 LAN Turtle - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage \ - -kmod-ath9k -swconfig -uboot-envtools -wpad-basic - BOARDNAME := LAN-TURTLE - DEVICE_PROFILE := LANTURTLE - TPLINK_HWID := 0x5348334c - CONSOLE := ttyATH0,115200 - IMAGES := sysupgrade.bin -endef -TARGET_DEVICES += lan-turtle - -define Device/lima - DEVICE_TITLE := 8devices Lima - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := LIMA - IMAGE_SIZE := 15616k - MTDPARTS := spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,256k(art)ro,-(firmware) -endef -TARGET_DEVICES += lima - -define Device/mr12 - DEVICE_TITLE := Meraki MR12 - DEVICE_PACKAGES := kmod-spi-gpio - BOARDNAME := MR12 - ROOTFS_SIZE := 13440k - IMAGE_SIZE := 15680k - MTDPARTS := spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2240k(kernel),64k(mac),128k(art)ro,15680k@0x80000(firmware) - IMAGE/kernel.bin := append-kernel - IMAGE/rootfs.bin := append-rootfs | pad-rootfs - IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE) - IMAGES := kernel.bin rootfs.bin sysupgrade.bin -endef -TARGET_DEVICES += mr12 - -define Device/mr16 - $(Device/mr12) - DEVICE_TITLE := Meraki MR16 - BOARDNAME := MR16 -endef -TARGET_DEVICES += mr16 - -define Device/dr342 - DEVICE_TITLE := Wallys DR342 - DEVICE_PACKAGES := kmod-usb2 -swconfig - BOARDNAME := DR342 - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += dr342 - -define Device/dr344 - DEVICE_TITLE := Wallys DR344 - BOARDNAME := DR344 - KERNEL_SIZE := 1408k - ROOTFS_SIZE := 6336k - IMAGE_SIZE := 7744k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) - IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE) -endef - -define Device/dr531 - DEVICE_TITLE := Wallys DR531 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := DR531 - IMAGE_SIZE := 7808k - MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,7808k(firmware),64k(art)ro -endef -TARGET_DEVICES += dr531 - -define Device/wndr3700 - DEVICE_TITLE := NETGEAR WNDR3700 - DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-wndr3700-usb - BOARDNAME := WNDR3700 - NETGEAR_KERNEL_MAGIC := 0x33373030 - NETGEAR_BOARD_ID := WNDR3700 - IMAGE_SIZE := 7680k - MTDPARTS := spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro - IMAGES := sysupgrade.bin factory.img factory-NA.img - KERNEL := kernel-bin | patch-cmdline | lzma -d20 | netgear-uImage lzma - IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs - IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE) - IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE) - IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += wndr3700 - -define Device/wndr3700v2 - $(Device/wndr3700) - DEVICE_TITLE := NETGEAR WNDR3700 v2 - NETGEAR_BOARD_ID := WNDR3700v2 - NETGEAR_KERNEL_MAGIC := 0x33373031 - NETGEAR_HW_ID := 29763654+16+64 - IMAGE_SIZE := 15872k - MTDPARTS := spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro - IMAGES := sysupgrade.bin factory.img -endef -TARGET_DEVICES += wndr3700v2 - -define Device/wndr3800 - $(Device/wndr3700v2) - DEVICE_TITLE := NETGEAR WNDR3800 - NETGEAR_BOARD_ID := WNDR3800 - NETGEAR_HW_ID := 29763654+16+128 -endef -TARGET_DEVICES += wndr3800 - -define Device/wndr3800ch - $(Device/wndr3800) - DEVICE_TITLE := NETGEAR WNDR3800 (Ch) - NETGEAR_BOARD_ID := WNDR3800CH -endef -TARGET_DEVICES += wndr3800ch - -define Device/wndrmac - $(Device/wndr3700v2) - DEVICE_TITLE := NETGEAR WNDRMAC - NETGEAR_BOARD_ID := WNDRMAC -endef -TARGET_DEVICES += wndrmac - -define Device/wndrmacv2 - $(Device/wndr3800) - DEVICE_TITLE := NETGEAR WNDRMAC v2 - NETGEAR_BOARD_ID := WNDRMACv2 -endef -TARGET_DEVICES += wndrmacv2 - -define Device/cap324 - DEVICE_TITLE := PowerCloud Systems CAP324 - BOARDNAME := CAP324 - DEVICE_PROFILE := CAP324 - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += cap324 - -define Device/cr3000 - DEVICE_TITLE := PowerCloud Systems CR3000 - BOARDNAME := CR3000 - DEVICE_PROFILE := CR3000 - IMAGE_SIZE := 7808k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro -endef -TARGET_DEVICES += cr3000 - -define Device/cr5000 - DEVICE_TITLE := PowerCloud Systems CR5000 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := CR5000 - DEVICE_PROFILE := CR5000 - IMAGE_SIZE := 7808k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro -endef -TARGET_DEVICES += cr5000 - -define Device/packet-squirrel - $(Device/tplink-16mlzma) - DEVICE_TITLE := Hak5 Packet Squirrel - DEVICE_PACKAGES := kmod-usb2 \ - -kmod-ath9k -swconfig -uboot-envtools -wpad-basic - BOARDNAME := PACKET-SQUIRREL - DEVICE_PROFILE := PACKETSQUIRREL - TPLINK_HWID := 0x5351524c - CONSOLE := ttyATH0,115200 - IMAGES := sysupgrade.bin -endef -TARGET_DEVICES += packet-squirrel - -define Device/pqi-air-pen - DEVICE_TITLE := PQI Air Pen - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage - BOARDNAME := PQI-AIR-PEN - IMAGE_SIZE := 7744k - CONSOLE := ttyATH0,115200 - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(art)ro,64k(NVRAM)ro,7680k(firmware),64k(CONF) -endef -TARGET_DEVICES += pqi-air-pen - -define Device/antminer-s1 - $(Device/tplink-8mlzma) - DEVICE_TITLE := Antminer-S1 - DEVICE_PACKAGES := kmod-usb2 kmod-crypto-manager kmod-i2c-gpio-custom kmod-usb-hid - BOARDNAME := ANTMINER-S1 - DEVICE_PROFILE := ANTMINERS1 - TPLINK_HWID := 0x04440101 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += antminer-s1 - -define Device/antminer-s3 - $(Device/tplink-8mlzma) - DEVICE_TITLE := Antminer-S3 - DEVICE_PACKAGES := kmod-usb2 kmod-crypto-manager kmod-i2c-gpio-custom kmod-usb-hid - BOARDNAME := ANTMINER-S3 - DEVICE_PROFILE := ANTMINERS3 - TPLINK_HWID := 0x04440301 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += antminer-s3 - -define Device/antrouter-r1 - $(Device/tplink-8mlzma) - DEVICE_TITLE := Antrouter-R1 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := ANTROUTER-R1 - DEVICE_PROFILE := ANTROUTERR1 - TPLINK_HWID := 0x44440101 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += antrouter-r1 - -define Device/el-m150 - $(Device/tplink-8mlzma) - DEVICE_TITLE := EasyLink EL-M150 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := EL-M150 - DEVICE_PROFILE := ELM150 - TPLINK_HWID := 0x01500101 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += el-m150 - -define Device/el-mini - $(Device/tplink-8mlzma) - DEVICE_TITLE := EasyLink EL-MINI - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := EL-MINI - DEVICE_PROFILE := ELMINI - TPLINK_HWID := 0x01530001 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += el-mini - -define Device/gl-inet-6408A-v1 - $(Device/tplink-8mlzma) - DEVICE_TITLE := GL.iNet 6408 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := GL-INET - DEVICE_PROFILE := GLINET - TPLINK_HWID := 0x08000001 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += gl-inet-6408A-v1 - -define Device/gl-inet-6416A-v1 - $(Device/tplink-16mlzma) - DEVICE_TITLE := GL.iNet 6416 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := GL-INET - DEVICE_PROFILE := GLINET - TPLINK_HWID := 0x08000001 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += gl-inet-6416A-v1 - -define Device/jwap230 - DEVICE_TITLE := jjPlus JWAP230 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := JWAP230 - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += jwap230 - -define Device/koala - DEVICE_TITLE := OCEDO Koala - BOARDNAME := KOALA - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct - IMAGE_SIZE := 7424k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),7424k(firmware),1536k(kernel2),5888k(rootfs2),1088k(data)ro,64k(id)ro,64k(art)ro -endef -TARGET_DEVICES += koala - -define Device/r36a - DEVICE_TITLE := ALFA Network R36A - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport -swconfig - BOARDNAME := R36A - SUPPORTED_DEVICES := r36a - IMAGE_SIZE := 15872k - MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware) - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ - append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += r36a - -define Device/r602n - DEVICE_TITLE := P&W R602N - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := R602N - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += r602n - -define Device/rut900 - DEVICE_TITLE := Teltonika RUT900 - DEVICE_PACKAGES := kmod-usb2 -uboot-envtools - BOARDNAME := RUT900 - SUPPORTED_DEVICES := rut900 - IMAGE_SIZE := 15552k - MTDPARTS := spi0.0:128k(u-boot)ro,64k(config)ro,64k(art)ro,15552k(firmware),576k(event-log)ro - TPLINK_HWID := 0x35000001 - TPLINK_HWREV := 0x1 - TPLINK_HEADER_VERSION := 1 - KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header - KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | uImage lzma - IMAGES := sysupgrade.bin factory.bin - IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs |\ - pad-rootfs | teltonika-fw-fake-checksum | append-string master |\ - append-md5sum-bin | check-size $$$$(IMAGE_SIZE) - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ - append-rootfs | pad-rootfs | append-metadata |\ - check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += rut900 - -define Device/mc-mac1200r - $(Device/tplink-8mlzma) - DEVICE_TITLE := Mercury MAC1200R - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct - BOARDNAME := MC-MAC1200R - DEVICE_PROFILE := MAC1200R - TPLINK_HWID := 0x12000001 -endef -TARGET_DEVICES += mc-mac1200r - -define Device/minibox-v1 - $(Device/tplink-16mlzma) - DEVICE_TITLE := GainStrong MiniBox V1.0 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := MINIBOX-V1 - DEVICE_PROFILE := MINIBOXV1 - TPLINK_HWID := 0x3C000201 - CONSOLE := ttyATH0,115200 - IMAGES := sysupgrade.bin -endef -TARGET_DEVICES += minibox-v1 - -define Device/minibox-v3.2 - $(Device/tplink-16mlzma) - DEVICE_TITLE := Gainstrong MiniBox V3.2 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca9887-ct -swconfig - BOARDNAME := MINIBOX-V3.2 - DEVICE_PROFILE := MINIBOXV32 - TPLINK_HWID := 0x3C00010C -endef -TARGET_DEVICES += minibox-v3.2 - -define Device/oolite-v1 - $(Device/minibox-v1) - DEVICE_TITLE := GainStrong Oolite V1.0 - BOARDNAME := OOLITE-V1 - DEVICE_PROFILE := OOLITEV1 - TPLINK_HWID := 0x3C000101 -endef -TARGET_DEVICES += oolite-v1 - -define Device/oolite-v5.2 - $(Device/tplink-16mlzma) - DEVICE_TITLE := GainStrong Oolite V5.2 - DEVICE_PACKAGES := ath10k-firmware-qca9887-ct kmod-ath10k-ct kmod-usb2 - BOARDNAME := OOLITE-V5-2 - DEVICE_PROFILE := OOLITEV52 - TPLINK_HWID := 0x3C00010B - IMAGES := sysupgrade.bin -endef -TARGET_DEVICES += oolite-v5.2 - -define Device/oolite-v5.2-dev - $(Device/oolite-v5.2) - DEVICE_TITLE := GainStrong Oolite V5.2-Dev (development board) - BOARDNAME := OOLITE-V5-2-DEV - DEVICE_PROFILE := OOLITEV52DEV -endef -TARGET_DEVICES += oolite-v5.2-dev - -define Device/omy-g1 - $(Device/tplink-16mlzma) - DEVICE_TITLE := OMYlink OMY-G1 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := OMY-G1 - DEVICE_PROFILE := OMYG1 - TPLINK_HWID := 0x06660101 -endef -TARGET_DEVICES += omy-g1 - -define Device/omy-x1 - $(Device/tplink-8mlzma) - DEVICE_TITLE := OMYlink OMY-X1 - BOARDNAME := OMY-X1 - DEVICE_PROFILE := OMYX1 - TPLINK_HWID := 0x06660201 -endef -TARGET_DEVICES += omy-x1 - -define Device/onion-omega - $(Device/tplink-16mlzma) - DEVICE_TITLE := Onion Omega - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-i2c-core kmod-i2c-gpio-custom kmod-spi-bitbang kmod-spi-dev kmod-spi-gpio kmod-spi-gpio-custom kmod-usb-serial - BOARDNAME := ONION-OMEGA - DEVICE_PROFILE := OMEGA - TPLINK_HWID := 0x04700001 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += onion-omega - -define Device/sc1750 - DEVICE_TITLE := Abicom SC1750 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := SC1750 - IMAGE_SIZE := 15744k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART) -endef -TARGET_DEVICES += sc1750 - -define Device/sc300m - DEVICE_TITLE := Abicom SC300M - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := SC300M - IMAGE_SIZE := 15744k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART) -endef -TARGET_DEVICES += sc300m - -define Device/sc450 - DEVICE_TITLE := Abicom SC450 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := SC450 - IMAGE_SIZE := 15744k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART) -endef -TARGET_DEVICES += sc450 - -define Device/smart-300 - $(Device/tplink-8mlzma) - DEVICE_TITLE := NC-LINK SMART-300 - BOARDNAME := SMART-300 - DEVICE_PROFILE := SMART-300 - TPLINK_HWID := 0x93410001 -endef -TARGET_DEVICES += smart-300 - -define Device/som9331 - $(Device/tplink-8mlzma) - DEVICE_TITLE := OpenEmbed SOM9331 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-i2c-core kmod-i2c-gpio-custom kmod-spi-bitbang kmod-spi-dev kmod-spi-gpio kmod-spi-gpio-custom kmod-usb-serial - BOARDNAME := SOM9331 - DEVICE_PROFILE := SOM9331 - TPLINK_HWID := 0x04800054 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += som9331 - -define Device/sr3200 - DEVICE_TITLE := YunCore SR3200 - DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct - BOARDNAME := SR3200 - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += sr3200 - -define Device/xd3200 - $(Device/sr3200) - DEVICE_TITLE := YunCore XD3200 - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct - BOARDNAME := XD3200 -endef -TARGET_DEVICES += xd3200 - -define Device/t830 - DEVICE_TITLE := YunCore T830 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := T830 - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro - SUPPORTED_DEVICES := t830 - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ - append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += t830 - -define Device/tellstick-znet-lite - $(Device/tplink-16mlzma) - DEVICE_TITLE := TellStick ZNet Lite - DEVICE_PACKAGES := kmod-usb2 kmod-usb-acm kmod-usb-serial kmod-usb-serial-pl2303 - BOARDNAME := TELLSTICK-ZNET-LITE - DEVICE_PROFILE := TELLSTICKZNETLITE - TPLINK_HWID := 0x00726001 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += tellstick-znet-lite - -define Device/ts-d084 - $(Device/tplink-8mlzma) - DEVICE_TITLE := PISEN TS-D084 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := TS-D084 - DEVICE_PROFILE := TSD084 - TPLINK_HWID := 0x07030101 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += ts-d084 - -define Device/n5q - DEVICE_TITLE := ALFA Network N5Q - DEVICE_PACKAGES := rssileds -swconfig - BOARDNAME := N5Q - SUPPORTED_DEVICES := n5q - IMAGE_SIZE := 15872k - MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware) - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ - append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += n5q - -define Device/NBG6616 - DEVICE_TITLE := ZyXEL NBG6616 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-rtc-pcf8563 kmod-ath10k-ct ath10k-firmware-qca988x-ct - BOARDNAME := NBG6616 - KERNEL_SIZE := 2048k - IMAGE_SIZE := 15323k - MTDPARTS := spi0.0:192k(u-boot)ro,64k(env),64k(RFdata)ro,384k(zyxel_rfsd),384k(romd),64k(header),2048k(kernel),13184k(rootfs),15232k@0x120000(firmware) - CMDLINE += mem=128M - RAS_BOARD := NBG6616 - RAS_ROOTFS_SIZE := 14464k - RAS_VERSION := "$(VERSION_DIST) $(REVISION)" - IMAGES := factory.bin sysupgrade.bin - KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 boot/vmlinux.lzma.uImage - IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(IMAGE_SIZE) | zyxel-ras-image - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) - # We cannot currently build a factory image. It is the sysupgrade image - # prefixed with a header (which is actually written into the MTD device). - # The header is 2kiB and is filled with 0xff. The format seems to be: - # 2 bytes: 0x0000 - # 2 bytes: checksum of the data partition (big endian) - # 4 bytes: length of the contained image file (big endian) - # 32 bytes: Firmware Version string (NUL terminated, 0xff padded) - # 2 bytes: 0x0000 - # 2 bytes: checksum over the header partition (big endian) - # 32 bytes: Model (e.g. "NBG6616", NUL termiated, 0xff padded) - # rest: 0xff padding - # - # The checksums are calculated by adding up all bytes and if a 16bit - # overflow occurs, one is added and the sum is masked to 16 bit: - # csum = csum + databyte; if (csum > 0xffff) { csum += 1; csum &= 0xffff }; - # Should the file have an odd number of bytes then the byte len-0x800 is - # used additionally. - # The checksum for the header is calcualted over the first 2048 bytes with - # the firmware checksum as the placeholder during calculation. - # - # The header is padded with 0xff to the erase block size of the device. -endef -TARGET_DEVICES += NBG6616 - -define Device/c-55 - DEVICE_TITLE := AirTight Networks C-55 - DEVICE_PACKAGES := kmod-ath9k - BOARDNAME := C-55 - KERNEL_SIZE := 2048k - IMAGE_SIZE := 15872k - MTDPARTS := spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,2048k(kernel),13824k(rootfs),13824k(opt)ro,2624k(failsafe)ro,64k(art)ro,15872k@0x60000(firmware) - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += c-55 - -define Device/hiwifi-hc6361 - DEVICE_TITLE := HiWiFi HC6361 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage \ - kmod-fs-ext4 kmod-nls-iso8859-1 e2fsprogs - BOARDNAME := HiWiFi-HC6361 - DEVICE_PROFILE := HIWIFI_HC6361 - IMAGE_SIZE := 16128k - KERNEL := kernel-bin | patch-cmdline | lzma | uImageHiWiFi lzma - CONSOLE := ttyATH0,115200 - MTDPARTS := spi0.0:64k(u-boot)ro,64k(bdinfo)ro,16128k(firmware),64k(backup)ro,64k(art)ro -endef -TARGET_DEVICES += hiwifi-hc6361 - -define Device/seama - LOADER_TYPE := bin - BLOCKSIZE := 64k - KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma - KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | seama - KERNEL_INITRAMFS_SUFFIX = $$(KERNEL_SUFFIX).seama - SEAMA_MTDBLOCK := 1 - IMAGES := sysupgrade.bin factory.bin - - # 64 bytes offset: - # - 28 bytes seama_header - # - 36 bytes of META data (4-bytes aligned) - IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs - IMAGE/sysupgrade.bin := \ - $$(IMAGE/default) | seama | pad-rootfs | \ - check-size $$$$(IMAGE_SIZE) - IMAGE/factory.bin := \ - $$(IMAGE/default) | seama | pad-rootfs | \ - seama-seal | check-size $$$$(IMAGE_SIZE) - SEAMA_SIGNATURE := -endef - -define Device/dir-869-a1 - $(Device/seama) - DEVICE_TITLE := D-Link DIR-869 rev. A1 - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct - BOARDNAME := DIR-869-A1 - IMAGE_SIZE := 15872k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro - SEAMA_SIGNATURE := wrgac54_dlink.2015_dir869 - IMAGE/factory.bin := \ - $$(IMAGE/default) | pad-rootfs -x 64 | \ - seama | seama-seal -m "signature=$$$$(SEAMA_SIGNATURE)" | \ - check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += dir-869-a1 - -define Device/mynet-n600 - $(Device/seama) - DEVICE_TITLE := Western Digital My Net N600 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := MYNET-N600 - IMAGE_SIZE := 15808k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro - SEAMA_SIGNATURE := wrgnd16_wd_db600 -endef -TARGET_DEVICES += mynet-n600 - -define Device/mynet-n750 - $(Device/seama) - DEVICE_TITLE := Western Digital My Net N750 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := MYNET-N750 - IMAGE_SIZE := 15808k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro - SEAMA_SIGNATURE := wrgnd13_wd_av -endef -TARGET_DEVICES += mynet-n750 - -define Device/qihoo-c301 - $(Device/seama) - DEVICE_TITLE := Qihoo C301 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct - BOARDNAME := QIHOO-C301 - IMAGE_SIZE := 15744k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata) - SEAMA_SIGNATURE := wrgac26_qihoo360_360rg -endef -TARGET_DEVICES += qihoo-c301 - -define Device/dap-1330-a1 - DEVICE_TITLE := D-Link DAP-1330 rev. A1 - DEVICE_PACKAGES := rssileds - BOARDNAME := DAP-1330-A1 - IMAGES := factory.img sysupgrade.bin - IMAGE_SIZE := 7936k - IMAGE/factory.img := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | mkdapimg2 917504 - MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,64k(mp)ro,64k(config)ro,7936k(firmware) - DAP_SIGNATURE := HONEYBEE-FIRMWARE-DAP-1330 -endef -TARGET_DEVICES += dap-1330-a1 - -define Device/dap-2695-a1 - DEVICE_TITLE := D-Link DAP-2695 rev. A1 - DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct - BOARDNAME := DAP-2695-A1 - IMAGES := factory.img sysupgrade.bin - IMAGE_SIZE := 15360k - IMAGE/factory.img := append-kernel | pad-offset 65536 160 | append-rootfs | wrgg-pad-rootfs | mkwrggimg | check-size $$$$(IMAGE_SIZE) - IMAGE/sysupgrade.bin := append-kernel | pad-offset 65536 160 | mkwrggimg | append-rootfs | wrgg-pad-rootfs | check-size $$$$(IMAGE_SIZE) - KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma - KERNEL_INITRAMFS := $$(KERNEL) | mkwrggimg - MTDPARTS := spi0.0:256k(bootloader)ro,64k(bdcfg)ro,64k(rgdb)ro,64k(langpack)ro,15360k(firmware),448k(captival)ro,64k(certificate)ro,64k(radiocfg)ro - DAP_SIGNATURE := wapac02_dkbs_dap2695 -endef -TARGET_DEVICES += dap-2695-a1 - -define Device/wam250 - DEVICE_TITLE := Samsung WAM250 - DEVICE_PACKAGES := kmod-usb2 -swconfig - BOARDNAME := WAM250 - IMAGE_SIZE := 15872k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),128k(nvram)ro,15872k(firmware),64k(art)ro - SUPPORTED_DEVICES := wam250 - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ - append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += wam250 - -define Device/wifi-pineapple-nano - $(Device/tplink-16mlzma) - DEVICE_TITLE := Hak5 WiFi Pineapple NANO - DEVICE_PACKAGES := kmod-ath9k-htc kmod-usb2 kmod-usb-storage \ - -swconfig -uboot-envtools - BOARDNAME := WIFI-PINEAPPLE-NANO - DEVICE_PROFILE := WIFIPINEAPPLENANO - TPLINK_HWID := 0x4e414e4f - CONSOLE := ttyATH0,115200 - IMAGES := sysupgrade.bin -endef -TARGET_DEVICES += wifi-pineapple-nano - -define Device/wlr8100 - DEVICE_TITLE := Sitecom WLR-8100 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb3 \ - kmod-ath10k-ct ath10k-firmware-qca988x-ct - BOARDNAME := WLR8100 - IMAGE_SIZE := 15424k - MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,15424k(firmware),256k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(art)ro -endef -TARGET_DEVICES += wlr8100 - -define Device/wpj-16m - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - MTDPARTS := spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro - IMAGE_SIZE := 16128k -endef - -define Device/wpj342 - $(Device/wpj-16m) - DEVICE_TITLE := Compex WPJ342 (16MB flash) - BOARDNAME := WPJ342 -endef -TARGET_DEVICES += wpj342 - -define Device/wpj344 - $(Device/wpj-16m) - DEVICE_TITLE := Compex WPJ344 (16MB flash) - BOARDNAME := WPJ344 - SUPPORTED_DEVICES := wpj344 - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ - append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += wpj344 - -define Device/wpj531 - $(Device/wpj-16m) - DEVICE_TITLE := Compex WPJ531 (16MB flash) - BOARDNAME := WPJ531 -endef -TARGET_DEVICES += wpj531 - -define Device/wpj558 - $(Device/wpj-16m) - DEVICE_TITLE := Compex WPJ558 (16MB flash) - BOARDNAME := WPJ558 - SUPPORTED_DEVICES := wpj558 - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ - append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += wpj558 - -define Device/wpj563 - $(Device/wpj-16m) - DEVICE_TITLE := Compex WPJ563 (16MB flash) - BOARDNAME := WPJ563 -endef -TARGET_DEVICES += wpj563 - -define Device/wrtnode2q - DEVICE_TITLE := WRTnode2Q - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage - BOARDNAME := WRTNODE2Q - IMAGE_SIZE := 16064k - MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(art)ro,16064k(firmware),16384k@0x0(fullflash) -endef -TARGET_DEVICES += wrtnode2q - -define Device/AVM - DEVICE_PACKAGES := fritz-tffs -uboot-envtools - KERNEL := kernel-bin | patch-cmdline | lzma | eva-image - KERNEL_INITRAMFS := $$(KERNEL) - IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \ - append-squashfs-fakeroot-be | pad-to 256 | \ - append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) -endef - -define Device/fritz300e - $(call Device/AVM) - DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E - DEVICE_PACKAGES += rssileds -swconfig - BOARDNAME := FRITZ300E - SUPPORTED_DEVICES := fritz300e - IMAGE_SIZE := 15232k -endef -TARGET_DEVICES += fritz300e - -define Device/fritz4020 - $(call Device/AVM) - DEVICE_TITLE := AVM FRITZ!Box 4020 - DEVICE_PACKAGES += kmod-usb2 kmod-usb-storage - BOARDNAME := FRITZ4020 - SUPPORTED_DEVICES := fritz4020 - IMAGE_SIZE := 15232k -endef -TARGET_DEVICES += fritz4020 - -define Device/fritz450e - $(call Device/AVM) - DEVICE_TITLE := AVM FRITZ!WLAN Repeater 450E - DEVICE_PACKAGES += -swconfig - BOARDNAME := FRITZ450E - SUPPORTED_DEVICES := fritz450e - IMAGE_SIZE := 15232k -endef -TARGET_DEVICES += fritz450e diff --git a/target/linux/ar71xx/image/legacy.mk b/target/linux/ar71xx/image/legacy.mk deleted file mode 100644 index 926ce780b4..0000000000 --- a/target/linux/ar71xx/image/legacy.mk +++ /dev/null @@ -1,1059 +0,0 @@ -rootfs_type=$(patsubst squashfs-%,squashfs,$(1)) - -# $(1): rootfs type. -# $(2): board name. -define imgname -$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(call rootfs_type,$(1)) -endef - -define rootfs_align -$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1)))))) -endef - -define sysupname -$(call imgname,$(1),$(2))-sysupgrade.bin -endef - -define factoryname -$(call imgname,$(1),$(2))-factory.bin -endef - -COMMA:=, - -define mkcmdline -$(if $(1),board=$(1) )$(if $(2),console=$(2)$(COMMA)$(3)) -endef - -define mtdpartsize -$(shell sz=`echo '$(2)' | sed -ne 's/.*[:$(COMMA)]\([0-9]*\)k[@]*[0-9a-zx]*($(1)).*/\1/p'`; [ -n "$$sz" ] && echo $$(($$sz * 1024))) -endef - -# $(1) : name of image build method to be used, e.g., AthLzma. -# $(2) : name of the build template to be used, e.g. 64k, 64kraw, 128k, etc. -# $(3) : name of the profile to be defined. -# $(4) : board name. -# $(5)~$(7) : arguments for $(mkcmdline) -# board=$(1) console=$(2),$(3) -# $(8)~$(14): extra arguments. -define SingleProfile - # $(1): action name, e.g. loader, buildkernel, squashfs, etc. - define Image/Build/Profile/$(3) - $$(call Image/Build/Template/$(2)/$$(1),$(1),$(4),$$(call mkcmdline,$(5),$(6),$(7)),$(8),$(9),$(10),$(11),$(12),$(13),$(14)) - endef -endef - -LOADER_MAKE := $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR) - -VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux -UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage - -# $(1): input file. -# $(2): output file. -# $(3): extra arguments for lzma. -define CompressLzma - $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(3) $(2) -endef - -define PatchKernel - cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1) - $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))" -endef - -define PatchKernel/initramfs - $(call PatchKernel,$(1),$(2),-initramfs) - cp $(KDIR_TMP)/vmlinux-initramfs-$(1) $(call imgname,initramfs,$(1)).bin -endef - -# $(1): board name. -# $(2): kernel command line. -# $(3): extra argumetns for lzma. -# $(4): name suffix, e.g. "-initramfs". -define PatchKernelLzma - cp $(KDIR)/vmlinux$(4) $(KDIR_TMP)/vmlinux$(4)-$(1) - $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(4)-$(1) "$(strip $(2))" - $(call CompressLzma,$(KDIR_TMP)/vmlinux$(4)-$(1),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(3)) -endef - -define PatchKernelGzip - cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1) - $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))" - gzip -9n -c $(KDIR_TMP)/vmlinux$(3)-$(1) > $(KDIR_TMP)/vmlinux$(3)-$(1).bin.gz -endef - -ifneq ($(SUBTARGET),mikrotik) -# $(1): compression method of the data. -# $(2): extra arguments. -# $(3): input data file. -# $(4): output file. -define MkuImage - mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \ - -e 0x80060000 -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \ - -d $(3) $(4) -endef - -# $(1): board name. -# $(2): kernel command line. -# $(3): extra arguments for lzma. -# $(4): name suffix, e.g. "-initramfs". -# $(5): extra arguments for mkimage. -define MkuImageLzma - $(call PatchKernelLzma,$(1),$(2),$(3),$(4)) - $(call MkuImage,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage) -endef - -define MkuImageLzma/initramfs - $(call PatchKernelLzma,$(1),$(2),$(3),-initramfs) - $(call MkuImage,lzma,$(4),$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.lzma,$(call imgname,initramfs,$(1))-uImage.bin) -endef - -define MkuImageGzip - $(call PatchKernelGzip,$(1),$(2)) - $(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-$(1).bin.gz,$(KDIR_TMP)/vmlinux-$(1).uImage) -endef - -define MkuImageGzip/initramfs - $(call PatchKernelGzip,$(1),$(2),-initramfs) - $(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.gz,$(call imgname,initramfs,$(1))-uImage.bin) -endef - -define MkuImageOKLI - $(call MkuImage,lzma,-M 0x4f4b4c49,$(KDIR)/vmlinux.bin.lzma,$(KDIR_TMP)/vmlinux-$(1).okli) -endef -endif - -# $(1): name of the 1st file. -# $(2): size limit of the 1st file if it is greater than 262144, or -# the erase size of the flash if it is greater than zero and less -# than 262144 -# $(3): name of the 2nd file. -# $(4): size limit of the 2nd file if $(2) is greater than 262144, otherwise -# it is the size limit of the output file -# $(5): name of the output file. -# $(6): padding size. -define CatFiles - if [ $(2) -eq 0 ]; then \ - filename="$(3)"; fstype=$${filename##*\.}; \ - case "$${fstype}" in \ - *) bs=`stat -c%s $(1)`;; \ - esac; \ - ( dd if=$(1) bs=$${bs} conv=sync; cat $(3) ) > $(5); \ - if [ -n "$(6)" ]; then \ - case "$${fstype}" in \ - squashfs*) \ - padjffs2 $(5) $(6); \ - ;; \ - esac; \ - fi; \ - if [ `stat -c%s $(5)` -gt $(4) ]; then \ - echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \ - rm -f $(5); \ - fi; \ - else if [ $(2) -gt 262144 ]; then \ - if [ `stat -c%s "$(1)"` -gt $(2) ]; then \ - echo "Warning: $(1) is too big (> $(2) bytes)" >&2; \ - else if [ `stat -c%s $(3)` -gt $(4) ]; then \ - echo "Warning: $(3) is too big (> $(4) bytes)" >&2; \ - else \ - ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \ - fi; fi; \ - else \ - ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \ - if [ `stat -c%s $(5)` -gt $(4) ]; then \ - echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \ - rm -f $(5); \ - fi; \ - fi; fi -endef - -# $(1): rootfs type. -# $(2): board name. -# $(3): kernel image size limit. -# $(4): rootfs image size limit. -# $(5): padding argument for padjffs2. -Sysupgrade/KR=$(call CatFiles,$(2),$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(5))) -Sysupgrade/KRuImage=$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)),$(5)) -Sysupgrade/RKuImage=$(call CatFiles,$(KDIR)/root.$(1),$(4),$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(call sysupname,$(1),$(2))) - -# $(1): ubinize ini file -# $(2): working directory -# $(3): output file -# $(4): physical erase block size -# $(5): minimum I/O unit size -# $(6): custom options -define ubinize - $(CP) $(1) $(2) - ( cd $(2); $(STAGING_DIR_HOST)/bin/ubinize -o $(3) -p $(4) -m $(5) $(6) $(1)) -endef - -# -# Embed lzma-compressed kernel inside lzma-loader. -# -# $(1), suffix of output filename, e.g. generic, lowercase board name, etc. -# $(2), suffix of target file to build, e.g. bin, gz, elf -# $(3), kernel command line to pass from lzma-loader to kernel -# $(4), unused here -# $(5), suffix of kernel filename, e.g. -initramfs, or empty -define Image/BuildLoader - -rm -rf $(KDIR)/lzma-loader - $(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)"\ - LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \ - LOADER_DATA="$(KDIR)/vmlinux$(5).bin.lzma" BOARD="$(1)" \ - compile loader.$(2) - -$(if $(5),$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2)) -endef - -# -# Build lzma-loader alone which will search for lzma-compressed kernel identified by -# uImage header with magic "OKLI" at boot time. -# -# $(4), offset into the flash space to start searching uImage magic "OKLI". -# $(5), size of search range starting at $(4). With 0 as the value, uImage -# header is expected to be at precisely $(4) -define Image/BuildLoaderAlone - -rm -rf $(KDIR)/lzma-loader - $(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)" \ - LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \ - BOARD="$(1)" FLASH_OFFS=$(4) FLASH_MAX=$(5) \ - compile loader.$(2) -endef - -define Build/Clean - $(LOADER_MAKE) clean -endef - -alfa_ap120c_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,13312k(rootfs),1536k(kernel),1152k(unknown)ro,64k(art)ro;spi0.1:-(unknown) -alfa_ap96_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13312k(rootfs),2048k(kernel),512k(caldata)ro,15360k@0x80000(firmware) -alfa_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) -alfa_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15936k(firmware),64k(nvram),64k(art)ro -all0258n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),6272k(firmware),1536k(failsafe),64k(art)ro -all0315n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env),13568k(firmware),2048k(failsafe),256k(art)ro -ap96_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1728k(kernel),64k(art)ro,7872k@0x40000(firmware) -ap121_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) -ap121_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,10944k(rootfs),4992k(kernel),64k(nvram),64k(art)ro,15936k@0x50000(firmware) -ap132_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),6400k(rootfs),64k(art)ro,7808k@0x50000(firmware) -ap135_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) -ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(mib0),64k(art)ro,7744k@0x50000(firmware) -ap143_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1472k(kernel),64k(art)ro,7744k@0x50000(firmware) -ap143_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) -ap147_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) -ap152_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) -bxu2000n2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),8448k(rootfs),6016k(user),64k(cfg),64k(oem),64k(art)ro -cameo_ap81_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,3840k(firmware),64k(art)ro -cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware),64k(mac)ro,64k(art)ro -cameo_ap99_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3520k(firmware),64k(mac)ro,192k(lp)ro,64k(art)ro -cameo_ap121_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware) -cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,7680k@0x80000(firmware) -cameo_ap123_mtdlayout_4M=mtdparts=spi0.0:64k(u-boot)ro,64k(nvram)ro,3712k(firmware),192k(lang)ro,64k(art)ro -cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro -cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro -cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art)ro,13632k@0xa0000(firmware) -eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro -db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) -dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro -dlan_hotspot_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(Config1)ro,64k(Config2)ro,7872k@0x40000(firmware),64k(art)ro -dlan_pro_500_wp_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,7680k@0x70000(firmware),64k(art)ro -dlan_pro_1200_ac_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,15872k@0x70000(firmware),64k(art)ro -cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy) -cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig) -esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware) -esr1750_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware) -epg5000_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware) -f9k1115v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),14464k(rootfs),1408k(kernel),64k(nvram)ro,64k(envram)ro,64k(art)ro,15872k@0x50000(firmware) -dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k@0x7f0000(caldata_copy) -dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig) -planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),128k(art)ro -whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro -wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),64k(nvram)ro,64k(art)ro -wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro -wnr2000_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro -wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro -wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmware),64k(art)ro -r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata)ro,256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k@0x1a0000(firmware),2048k(language),3072k(traffic_meter) -tew823dru_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro -wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata)ro,512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved) -zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware) -mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro -zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k@0x0(zyxel_rfsd),2048k@0x200000(romd),1024k@0x400000(header),2048k@0x500000(kernel),125952k@0x500000(firmware),-@0x700000(ubi) - -define Image/BuildKernel - cp $(KDIR)/vmlinux.elf $(VMLINUX).elf - cp $(KDIR)/vmlinux $(VMLINUX).bin - dd if=$(KDIR)/vmlinux.bin.lzma of=$(VMLINUX).lzma bs=65536 conv=sync - $(call MkuImage,lzma,,$(KDIR)/vmlinux.bin.lzma,$(UIMAGE)-lzma.bin) - cp $(KDIR)/loader-generic.elf $(VMLINUX)-lzma.elf - -mkdir -p $(KDIR_TMP) -endef - -define Image/BuildKernel/Initramfs - cp $(KDIR)/vmlinux-initramfs.elf $(VMLINUX)-initramfs.elf - cp $(KDIR)/vmlinux-initramfs $(VMLINUX)-initramfs.bin - dd if=$(KDIR)/vmlinux-initramfs.bin.lzma of=$(VMLINUX)-initramfs.lzma bs=65536 conv=sync - $(call MkuImage,lzma,,$(KDIR)/vmlinux-initramfs.bin.lzma,$(UIMAGE)-initramfs-lzma.bin) - cp $(KDIR)/loader-generic-initramfs.elf $(VMLINUX)-initramfs-lzma.elf - $(call Image/Build/Initramfs) -endef - -Image/Build/WRT400N/buildkernel=$(call MkuImageLzma,$(2),$(3)) - -define Image/Build/WRT400N - $(call Sysupgrade/KRuImage,$(1),$(2),1310720,6488064) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - wrt400n $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/root.$(1) $(call factoryname,$(1),$(2)); \ - fi -endef - - -define Image/Build/CameoAP94/buildkernel - $(call MkuImageLzma,$(2),$(3) $(4)) - $(call MkuImageLzma,$(2)-fat,$(3) $(5)) -endef - -define Image/Build/CameoAP94 - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(eval fwsize_fat=$(call mtdpartsize,firmware,$(5))) - $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - ( \ - dd if=$(call sysupname,$(1),$(2)); \ - echo -n "$(6)"; \ - ) > $(call imgname,$(1),$(2))-backup-loader.bin; \ - if [ `stat -c%s $(call sysupname,$(1),$(2))` -gt 4194304 ]; then \ - echo "Warning: $(call sysupname,$(1),$(2)) is too big" >&2; \ - else \ - ( \ - dd if=$(call sysupname,$(1),$(2)) bs=4096k conv=sync; \ - echo -n "$(7)"; \ - ) > $(call factoryname,$(1),$(2)); \ - fi; \ - fi - $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2)-fat.uImage,0,$(KDIR)/root.$(1),$$(($(fwsize_fat)-4*64*1024)),$(KDIR_TMP)/$(2)-fat.bin,64) - if [ -e "$(KDIR_TMP)/$(2)-fat.bin" ]; then \ - echo -n "" > $(KDIR_TMP)/$(2)-fat.dummy; \ - sh $(TOPDIR)/scripts/combined-image.sh \ - "$(KDIR_TMP)/$(2)-fat.bin" \ - "$(KDIR_TMP)/$(2)-fat.dummy" \ - $(call sysupname,$(1),$(2)-fat); \ - fi -endef - -define Image/Build/WZRHP - $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(3)-4*$(4)*1024)),$(4)) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - ( \ - echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \ - dd if=$(call sysupname,$(1),$(2)); \ - ) > $(call imgname,$(1),$(2))-tftp.bin; \ - buffalo-enc -p $(5) -v 1.99 \ - -i $(call sysupname,$(1),$(2)) \ - -o $(KDIR_TMP)/$(2).enc; \ - buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \ - -w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \ - -i $(KDIR_TMP)/$(2).enc \ - -o $(call factoryname,$(1),$(2)); \ - fi -endef - -Image/Build/WZRHP64K/buildkernel=$(call MkuImageLzma,$(2),$(3)) -Image/Build/WZRHP64K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) -Image/Build/WZRHP64K=$(call Image/Build/WZRHP,$(1),$(2),33095680,64,$(4)) - -Image/Build/WZRHP128K/buildkernel=$(call MkuImageLzma,$(2),$(3)) -Image/Build/WZRHP128K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) -Image/Build/WZRHP128K=$(call Image/Build/WZRHP,$(1),$(2),33030144,128,$(4)) - - -Image/Build/WHRHPG300N/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/WHRHPG300N/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -define Image/Build/WHRHPG300N - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - ( \ - echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \ - dd if=$(call sysupname,$(1),$(2)); \ - ) > $(call imgname,$(1),$(2))-tftp.bin; \ - buffalo-enc -p $(5) -v 1.99 \ - -i $(call sysupname,$(1),$(2)) \ - -o $(KDIR_TMP)/$(2).enc; \ - buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \ - -w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \ - -i $(KDIR_TMP)/$(2).enc \ - -o $(call factoryname,$(1),$(2)); \ - fi -endef - - -define Image/Build/Cameo - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - factory_size=$$(($(fwsize) - $(6))); \ - ( \ - dd if=$(call sysupname,$(1),$(2)) bs=$${factory_size} conv=sync; \ - echo -n $(5); \ - ) > $(call factoryname,$(1),$(2)); \ - fi -endef - -Image/Build/CameoAP81/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap81_mtdlayout)) -Image/Build/CameoAP81=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap81_mtdlayout),$(4),65536) -Image/Build/CameoAP81/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap81_mtdlayout)) - -Image/Build/CameoAP91/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap91_mtdlayout)) -Image/Build/CameoAP91=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap91_mtdlayout),$(4),65536) -Image/Build/CameoAP91/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap91_mtdlayout)) - -Image/Build/CameoAP99/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap99_mtdlayout)) -Image/Build/CameoAP99=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536) -Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap99_mtdlayout)) - -Image/Build/CameoAP123_4M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap123_mtdlayout_4M)) -Image/Build/CameoAP123_4M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap123_mtdlayout_4M),$(4),26) -Image/Build/CameoAP123_4M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap123_mtdlayout_4M)) - -Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26) -Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -Image/Build/CameoDB120/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout)) -Image/Build/CameoDB120=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout),$(4),26) -Image/Build/CameoDB120/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout)) - -Image/Build/CameoDB120_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout_8M)) -Image/Build/CameoDB120_8M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout_8M),$(4),26) -Image/Build/CameoDB120_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout_8M)) - -define Image/Build/CameoHornet - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - for r in $(7); do \ - [ -n "$$r" ] && dashr="-$$r" || dashr=; \ - [ -z "$$r" ] && r="DEF"; \ - mkcameofw -M HORNET -R "$$r" -S $(5) -V $(6) -c \ - -K $(8) -I $(fwsize) \ - -k "$(call sysupname,$(1),$(2))" \ - -o $(call imgname,$(1),$(2))-factory$$dashr.bin; \ - true; \ - done; \ - fi -endef - -Image/Build/CameoAP121/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout)) -Image/Build/CameoAP121=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout),$(4),$(5),$(6),0xe0000) -Image/Build/CameoAP121/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout)) - -Image/Build/CameoAP121_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout_8M)) -Image/Build/CameoAP121_8M=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout_8M),$(4),$(5),$(6),0x100000) -Image/Build/CameoAP121_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout_8M)) - -define Image/Build/dLAN - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) - $(eval kernsize=$(call mtdpartsize,kernel,$(4))) - $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize))) -endef - -Image/Build/dLANLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/dLANLzma=$(call Image/Build/dLAN,$(1),$(2),$(3),$(4),$(5),$(6),$(7)) -Image/Build/dLANLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -define Image/Build/Ath - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) - $(eval kernsize=$(call mtdpartsize,kernel,$(4))) - $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize))) -endef - -Image/Build/AthGzip/buildkernel=$(call MkuImageGzip,$(2),$(3) $(4)) -Image/Build/AthGzip=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7)) -Image/Build/AthGzip/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(4)) - -Image/Build/AthLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/AthLzma=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7)) -Image/Build/AthLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - - -Image/Build/Belkin/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/Belkin/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -define Image/Build/Belkin - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(eval kernsize=$(call mtdpartsize,kernel,$(4))) - $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) - $(call Sysupgrade/RKuImage,$(1),$(2),$(kernsize),$(rootsize)) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - edimax_fw_header -m $(5) -v "$(shell echo -n $(VERSION_DIST)$(REVISION) | cut -c -13)" \ - -n "uImage" \ - -i $(KDIR_TMP)/vmlinux-$(2).uImage \ - -o $(KDIR_TMP)/$(2)-uImage; \ - edimax_fw_header -m $(5) -v "$(shell echo -n $(VERSION_DIST)$(REVISION) | cut -c -13)" \ - -n "rootfs" \ - -i $(KDIR)/root.$(1) \ - -o $(KDIR_TMP)/$(2)-rootfs; \ - ( \ - dd if=$(KDIR_TMP)/$(2)-rootfs; \ - dd if=$(KDIR_TMP)/$(2)-uImage; \ - ) > "$(call factoryname,$(1),$(2))"; \ - fi -endef - -define Image/Build/EnGenius - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) - $(eval kernsize=$(call mtdpartsize,kernel,$(4))) - $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize))) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - mksenaofw -e $(call sysupname,$(1),$(2)) \ - -o $(call imgname,$(1),$(2))-factory.dlf \ - -r 0x101 -p $(7) -t 2; \ - fi -endef - -Image/Build/EnGenius/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/EnGenius/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - - -Image/Build/PB4X/buildkernel=$(call PatchKernelLzma,$(2),$(3)) - -define Image/Build/PB4X - dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \ - of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync - dd if=$(KDIR)/root.$(1) \ - of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync - -sh $(TOPDIR)/scripts/combined-image.sh \ - "$(call imgname,kernel,$(2)).bin" \ - "$(call imgname,$(1),$(2)-rootfs).bin" \ - $(call sysupname,$(1),$(2)) -endef - - -Image/Build/MyLoader/buildkernel=$(call PatchKernelLzma,$(2),$(3)) -Image/Build/MyLoader/initramfs=$(call PatchKernel/initramfs,$(2),$(3)) - -define Image/Build/MyLoader - $(eval fwsize=$(shell echo $$(($(4)-0x30000-4*64*1024)))) - $(eval fwimage=$(KDIR_TMP)/$(2)-$(5)-firmware.bin) - $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).bin.lzma,65536,$(KDIR)/root.$(1),$(fwsize),$(fwimage)) - if [ -e "$(fwimage)" ]; then \ - $(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s $(4) -v \ - -p0x00030000:0:al:0x80060000:firmware:$(fwimage) \ - $(call imgname,$(1),$(2))-$(5)-factory.img; \ - echo -n "" > $(KDIR_TMP)/empty.bin; \ - sh $(TOPDIR)/scripts/combined-image.sh \ - $(fwimage) $(KDIR_TMP)/empty.bin \ - $(call imgname,$(1),$(2))-$(5)-sysupgrade.bin; \ - fi -endef - -Image/Build/Planex/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(planex_mtdlayout)) -Image/Build/Planex/loader=$(call Image/BuildLoaderAlone,$(1),gz,$(2) $(planex_mtdlayout),0x52000,0) - -define Image/Build/Planex/buildkernel - [ -e "$(KDIR)/loader-$(2).gz" ] - $(call MkuImageOKLI,$(2)) - ( \ - dd if=$(KDIR)/loader-$(2).gz bs=8128 count=1 conv=sync; \ - dd if=$(KDIR_TMP)/vmlinux-$(2).okli; \ - ) > $(KDIR_TMP)/kernel-$(2).bin - $(call MkuImage,gzip,,$(KDIR_TMP)/kernel-$(2).bin,$(KDIR_TMP)/vmlinux-$(2).uImage) -endef - -define Image/Build/Planex - $(eval fwsize=$(call mtdpartsize,firmware,$(planex_mtdlayout))) - $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - $(STAGING_DIR_HOST)/bin/mkplanexfw \ - -B $(2) \ - -v 2.00.00 \ - -i $(call sysupname,$(1),$(2)) \ - -o $(call factoryname,$(1),$(2)); \ - fi -endef - - -Image/Build/ALFA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/ALFA/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -define Image/Build/ALFA - $(call Sysupgrade/RKuImage,$(1),$(2),$(5),$(6)) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - rm -rf $(KDIR)/$(1); \ - mkdir -p $(KDIR)/$(1); \ - cd $(KDIR)/$(1); \ - cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/$(1)/$(7); \ - cp $(KDIR)/root.$(1) $(KDIR)/$(1)/$(8); \ - $(TAR) c \ - $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \ - -C $(KDIR)/$(1) $(7) $(8) \ - | gzip -9nc > $(call factoryname,$(1),$(2)); \ - ( \ - echo WRM7222C | dd bs=32 count=1 conv=sync; \ - echo -ne '\xfe'; \ - ) >> $(call factoryname,$(1),$(2)); \ - fi -endef - - -Image/Build/Senao/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/Senao/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -define Image/Build/Senao - mkdir -p $(KDIR_TMP)/$(2)/ - touch $(KDIR_TMP)/$(2)/FWINFO-OpenWrt-$(REVISION)-$(2) - -$(CP) ./$(2)/* $(KDIR_TMP)/$(2)/ - dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \ - of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-uImage-lzma.bin bs=64k conv=sync - dd if=$(KDIR)/root.$(1) \ - of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-root.$(1) bs=64k conv=sync - ( \ - cd $(KDIR_TMP)/$(2)/; \ - $(TAR) -c \ - $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \ - * | gzip -9nc > $(call factoryname,$(1),$(2)) \ - ) - -rm -rf $(KDIR_TMP)/$(2)/ - -sh $(TOPDIR)/scripts/combined-image.sh \ - $(KDIR_TMP)/vmlinux-$(2).uImage \ - $(KDIR)/root.$(1) \ - $(call sysupname,$(1),$(2)) -endef - -define Image/Build/CyberTAN - echo -n '' > $(KDIR_TMP)/empty.bin - -$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \ - -f $(KDIR_TMP)/vmlinux-$(2).uImage -F $(KDIR_TMP)/empty.bin \ - -x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) && \ - $(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) \ - -i $(KDIR)/image.tmp \ - -o $(call sysupname,$(1),$(2)) - -$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp -f $(KDIR_TMP)/vmlinux-$(2).uImage \ - -x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) && \ - $(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) -g \ - -i $(KDIR)/image.tmp \ - -o $(call factoryname,$(1),$(2)) - -rm $(KDIR)/image.tmp -endef - -Image/Build/CyberTANGZIP/loader=$(call Image/BuildLoader,$(1),gz,$(2),0x80060000) -Image/Build/CyberTANGZIP/buildkernel=$(call MkuImage,gzip,,$(KDIR)/loader-$(2).gz,$(KDIR_TMP)/vmlinux-$(2).uImage) -Image/Build/CyberTANGZIP=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5)) - -Image/Build/CyberTANLZMA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/CyberTANLZMA=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5)) - - -Image/Build/Netgear/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5)) - -define Image/Build/Netgear/buildkernel - $(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5)) - -rm -rf $(KDIR_TMP)/$(2) - mkdir -p $(KDIR_TMP)/$(2)/image - cat $(KDIR_TMP)/vmlinux-$(2).uImage > $(KDIR_TMP)/$(2)/image/uImage - $(STAGING_DIR_HOST)/bin/mksquashfs-lzma \ - $(KDIR_TMP)/$(2) $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1 \ - -noappend -root-owned -be -b 65536 \ - $(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH)) - ( \ - cat $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1; \ - dd if=/dev/zero bs=1k count=1 \ - ) > $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2 - mkimage -A mips -O linux -T filesystem -C none -M $(5) \ - -a 0xbf070000 -e 0xbf070000 \ - -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \ - -d $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2 \ - $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs -endef - -define Image/Build/Netgear - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage.squashfs,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64) - if [ -e $(call sysupname,$(1),$(2)) ]; then \ - for r in $(7) ; do \ - [ -n "$$r" ] && dashr="-$$r" || dashr= ; \ - $(STAGING_DIR_HOST)/bin/mkdniimg \ - -B $(6) -v $(VERSION_DIST).$(REVISION) -r "$$r" $(8) \ - -i $(call sysupname,$(1),$(2)) \ - -o $(call imgname,$(1),$(2))-factory$$dashr.img; \ - done; \ - fi - if [ "$2" = "wnr2000" ]; then \ - dd if=$(KDIR)/root.$(1) \ - of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \ - fi -endef - - -Image/Build/NetgearLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5)) -Image/Build/NetgearLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5)) - -define Image/Build/NetgearLzma - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64) -endef - - -Image/Build/NetgearNAND/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5)) - -# $(1): (empty) -# $(2): Board name (small caps) -# $(3): Kernel board specific cmdline -# $(4): Kernel mtdparts definition -# $(5): U-Boot magic -define Image/Build/NetgearNAND/buildkernel - $(eval kernelsize=$(call mtdpartsize,kernel,$(4))) - $(call PatchKernelLzma,$(2),$(3) $(4),-d20) - dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \ - of=$(KDIR_TMP)/vmlinux-$(2).bin.tmp \ - bs=$$(($(kernelsize)-131072-2*64-1)) \ - count=1 conv=sync - $(call MkuImage,lzma,-M $(5),$(KDIR_TMP)/vmlinux-$(2).bin.tmp,$(KDIR_TMP)/vmlinux-$(2).uImage) - echo -ne '\xff' >> $(KDIR_TMP)/vmlinux-$(2).uImage - # create a fake rootfs image - dd if=/dev/zero of=$(KDIR_TMP)/fakeroot-$(2) bs=131072 count=1 - mkimage -A mips -O linux -T filesystem -C none \ - -a 0xbf070000 -e 0xbf070000 \ - -n 'MIPS $(VERSION_DIST) fakeroot' \ - -d $(KDIR_TMP)/fakeroot-$(2) \ - -M $(5) \ - $(KDIR_TMP)/fakeroot-$(2).uImage - # append the fake rootfs image to the kernel, it will reside in the last - # erase block of the kernel partition - cat $(KDIR_TMP)/fakeroot-$(2).uImage >> $(KDIR_TMP)/vmlinux-$(2).uImage -endef - - -# $(1): rootfs image suffix -# $(2): Board name (small caps) -# $(3): Kernel board specific cmdline -# $(4): Kernel mtdparts definition -# $(5): U-Boot magic -# $(6): Board name (upper caps) -# $(7): firmware region code (not used yet) -# $(8): DNI Hardware version -# $(9): suffix of the configuration file for ubinize -define Image/Build/NetgearNAND - $(eval firmwaresize=$(call mtdpartsize,firmware,$(4))) - $(eval kernelsize=$(call mtdpartsize,kernel,$(4))) - $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img) - $(CP) $(KDIR)/root.squashfs-raw $(KDIR_TMP)/root.squashfs - echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof - $(call ubinize,ubinize-$(9).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5) - ( \ - dd if=$(KDIR_TMP)/vmlinux-$(2).uImage; \ - dd if=$(KDIR_TMP)/$(2)-root.ubi \ - ) > $(imageraw) - $(STAGING_DIR_HOST)/bin/mkdniimg \ - -B $(6) -v $(VERSION_DIST).$(REVISION) -r "$$r" $(8) \ - -i $(imageraw) \ - -o $(call imgname,ubi,$(2))-factory.img - - $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/vmlinux-$(2).uImage) -endef - -ZYXEL_UBOOT = $(KDIR)/u-boot-nbg460n_550n_550nh.bin -ZYXEL_UBOOT_BIN = $(wildcard $(BIN_DIR)/u-boot-nbg460n_550n_550nh/u-boot.bin) - -Image/Build/ZyXEL/buildkernel=$(call MkuImageLzma,$(2),$(3)) - -define Image/Build/ZyXEL - $(call Sysupgrade/KRuImage,$(1),$(2),917504,2752512) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - if [ ! -f $(ZYXEL_UBOOT) ]; then \ - echo "Warning: $(ZYXEL_UBOOT) not found" >&2; \ - else \ - $(STAGING_DIR_HOST)/bin/mkzynfw \ - -B $(4) \ - -b $(ZYXEL_UBOOT) \ - -r $(call sysupname,$(1),$(2)):0x10000 \ - -o $(call factoryname,$(1),$(2)); \ - fi; fi -endef - -# attention: only zlib compression is allowed for the boot fs -define Image/Build/ZyXELNAND/buildkernel - $(eval kernelsize=$(call mtdpartsize,kernel,$(5))) - $(call MkuImageLzma,$(2),$(3) $(5) $(6)) - mkdir -p $(KDIR_TMP)/$(2)/image/boot - cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/boot/vmlinux.lzma.uImage - $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \ - --pad=$(kernelsize) --big-endian --squash-uids -v -e 128KiB -q -f -n -x lzma -x rtime \ - -o $(KDIR_TMP)/$(2)-kernel.jffs2 \ - -d $(KDIR_TMP)/$(2)/image \ - 2>&1 1>/dev/null | awk '/^.+$$/' - -rm -rf $(KDIR_TMP)/$(2) -endef - -define Image/Build/ZyXELNAND - if [ "$(1)" != "squashfs" ]; then \ - echo Only squashfs is supported; \ - return 0; \ - fi - $(eval firmwaresize=$(call mtdpartsize,firmware,$(4))) - $(eval kernelsize=$(call mtdpartsize,kernel,$(4))) - $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img) - $(CP) $(KDIR)/root.$(1) $(KDIR_TMP)/ubi_root.img - $(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5) - ( \ - dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \ - dd if=$(KDIR_TMP)/$(2)-root.ubi \ - ) > $(imageraw) - dd if=$(imageraw) of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.bin \ - bs=128k conv=sync - $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/$(2)-kernel.jffs2) -endef - - -Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2)) -Image/Build/OpenMesh/initramfs=$(call MkuImageLzma/initramfs,$(2),) - -define Image/Build/OpenMesh - -sh $(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \ - "$(4)" \ - "$(BUILD_DIR)/fwupgrade.cfg-$(4)" \ - "$(KDIR_TMP)/vmlinux-$(2).uImage" \ - "$(KDIR)/root.$(1)" - -sh $(TOPDIR)/scripts/combined-ext-image.sh \ - "$(4)" "$(call factoryname,$(1),$(2))" \ - "$(BUILD_DIR)/fwupgrade.cfg-$(4)" "fwupgrade.cfg" \ - "$(KDIR_TMP)/vmlinux-$(2).uImage" "kernel" \ - "$(KDIR)/root.$(1)" "rootfs" - if [ -e "$(call factoryname,$(1),$(2))" ]; then \ - cp "$(call factoryname,$(1),$(2))" "$(call sysupname,$(1),$(2))"; \ - fi -endef - - -Image/Build/Zcomax/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/Zcomax/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -define Image/Build/Zcomax - $(call Sysupgrade/RKuImage,$(1),$(2),1507328,6356992) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - $(STAGING_DIR_HOST)/bin/mkzcfw \ - -B $(2) \ - -k $(KDIR_TMP)/vmlinux-$(2).uImage \ - -r $(KDIR)/root.$(1) \ - -o $(call imgname,$(1),$(2))-factory.img; \ - fi -endef - - -# $(1): template name to be defined. -# $(2): squashfs suffix to be used. -define BuildTemplate - # $(1) : name of build method. - # $(2) : board name. - # $(3) : kernel command line. - # $(4)~$(8): extra arguments. - define Image/Build/Template/$(1)/initramfs - $$(call Image/Build/$$(1)/initramfs,initramfs,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) - endef - define Image/Build/Template/$(1)/loader - $$(call Image/Build/$$(1)/loader,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) - endef - define Image/Build/Template/$(1)/buildkernel - $$(call Image/Build/$$(1)/buildkernel,,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) - endef - define Image/Build/Template/$(1)/squashfs - $$(call Image/Build/$$(1),squashfs$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) - endef -endef - -$(eval $(call BuildTemplate,squashfs-only)) -$(eval $(call BuildTemplate,64k,-64k)) -$(eval $(call BuildTemplate,64kraw,-raw)) -$(eval $(call BuildTemplate,64kraw-nojffs,-raw)) -$(eval $(call BuildTemplate,128k)) -$(eval $(call BuildTemplate,128kraw,-raw)) -$(eval $(call BuildTemplate,256k)) -$(eval $(call BuildTemplate,all)) - -ifeq ($(SUBTARGET),generic) -$(eval $(call SingleProfile,ALFA,64k,ALFANX,alfa-nx,ALFA-NX,ttyS0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,vmlinux.gz.uImage,pb9x-2.6.31-jffs2)) -$(eval $(call SingleProfile,ALFA,64k,HORNETUB,hornet-ub,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel_image,rootfs_image)) -$(eval $(call SingleProfile,ALFA,64k,TUBE2H8M,tube2h-8M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel.image,rootfs.image)) - -$(eval $(call SingleProfile,AthGzip,64k,AP96,ap96,AP96,ttyS0,115200,$$(ap96_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthGzip,64k,WNDAP360,wndap360,WNDAP360,ttyS0,9600,$$(wndap360_mtdlayout),KRuImage,65536)) - -$(eval $(call SingleProfile,AthLzma,64k,ALFAAP120C,alfa-ap120c,ALFA-AP120C,ttyS0,115200,$$(alfa_ap120c_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,ALFAAP96,alfa-ap96,ALFA-AP96,ttyS0,115200,$$(alfa_ap96_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,ALL0258N,all0258n,ALL0258N,ttyS0,115200,$$(all0258n_mtdlayout),KRuImage,65536)) -$(eval $(call SingleProfile,AthLzma,256k,ALL0315N,all0315n,ALL0315N,ttyS0,115200,$$(all0315n_mtdlayout),KRuImage,262144)) -$(eval $(call SingleProfile,AthLzma,64k,AP121_8M,ap121-8M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_8M),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP121_16M,ap121-16M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_16M),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP132,ap132,AP132,ttyS0,115200,$$(ap132_mtdlayout),KRuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP135,ap135-020,AP135-020,ttyS0,115200,$$(ap135_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP136_010,ap136-010,AP136-010,ttyS0,115200,$$(ap136_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP136_020,ap136-020,AP136-020,ttyS0,115200,$$(ap136_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP143_8M,ap143-8M,AP143,ttyS0,115200,$$(ap143_mtdlayout_8M),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP143_16M,ap143-16M,AP143,ttyS0,115200,$$(ap143_mtdlayout_16M),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP147_010,ap147-010,AP147-010,ttyS0,115200,$$(ap147_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP152_16M,ap152-16M,AP152,ttyS0,115200,$$(ap152_mtdlayout_16M),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,BXU2000N2,bxu2000n-2-a1,BXU2000n-2-A1,ttyS0,115200,$$(bxu2000n2_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,CAP4200AG,cap4200ag,CAP4200AG,ttyS0,115200,$$(cap4200ag_mtdlayout),KRuImage)) -$(eval $(call SingleProfile,AthLzma,64k,DB120,db120,DB120,ttyS0,115200,$$(db120_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536)) -$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536)) - -$(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,"")) - -$(eval $(call SingleProfile,CameoAP135,64kraw,DGL5500A1,dgl-5500-a1,DGL-5500-A1,ttyS0,115200,$$(dgl_5500_mtdlayout),"00AP135AR9558-RT-130508-00")) -$(eval $(call SingleProfile,CameoAP135,64kraw,TEW823DRU,tew-823dru,TEW-823DRU,ttyS0,115200,$$(tew823dru_mtdlayout) mem=256M,"00AP135AR9558-RT-131129-00")) - -$(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) -$(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) -$(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) - -$(eval $(call SingleProfile,CameoDB120_8M,64kraw,TEW732BR,tew-732br,TEW-732BR,ttyS0,115200,"00DB120AR9341-RT-120906-NA")) - -$(eval $(call SingleProfile,CyberTANGZIP,64k,E2100L,e2100l,E2100L,ttyS0,115200,,1.00.01)) -$(eval $(call SingleProfile,CyberTANGZIP,64k,WRT160NL,wrt160nl,WRT160NL,ttyS0,115200,,1.00.01)) - -$(eval $(call SingleProfile,CyberTANLZMA,64k,MYNETREXT,mynet-rext,MYNET-REXT,ttyS0,115200,$$(mynet_rext_mtdlayout) root=31:2,1.00.01)) - -$(eval $(call SingleProfile,CameoAP94,64kraw,DIR825B1,dir-825-b1,DIR-825-B1,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00)) -$(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01)) -$(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00)) - -$(eval $(call SingleProfile,dLANLzma,64k,dLAN_Hotspot,dlan-hotspot,dLAN-Hotspot,ttyATH0,115200,$$(dlan_hotspot_mtdlayout) mem=64M,KRuImage,65536)) -$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_500_wp,dlan-pro-500-wp,dLAN-pro-500-wp,ttyS0,115200,$$(dlan_pro_500_wp_mtdlayout) mem=128M,KRuImage,65536)) -$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_1200_ac,dlan-pro-1200-ac,dLAN-pro-1200-ac,ttyS0,115200,$$(dlan_pro_1200_ac_mtdlayout) mem=128M,KRuImage,65536)) - -$(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e)) -$(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61)) -$(eval $(call SingleProfile,EnGenius,64k,EPG5000,epg5000,EPG5000,ttyS0,115200,$$(epg5000_mtdlayout),KRuImage,,0x71)) - -$(eval $(call SingleProfile,MyLoader,64k,WP543_8M,wp543,,ttyS0,115200,0x800000,8M)) -$(eval $(call SingleProfile,MyLoader,64k,WP543_16M,wp543,,ttyS0,115200,0x1000000,16M)) -$(eval $(call SingleProfile,MyLoader,64k,WPE72_8M,wpe72,,ttyS0,115200,0x800000,8M)) -$(eval $(call SingleProfile,MyLoader,64k,WPE72_16M,wpe72,,ttyS0,115200,0x1000000,16M)) - -$(eval $(call SingleProfile,Netgear,64kraw,WNR2200,wnr2200,WNR2200,ttyS0,115200,$$(wnr2200_mtdlayout),0x32323030,wnr2200,"" NA,)) - -$(eval $(call SingleProfile,OpenMesh,squashfs-only,A60,a60,,,,A60)) -$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM2P,om2p,,,,OM2P)) -$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5P,om5p,,,,OM5P)) -$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5PAC,om5pac,,,,OM5PAC)) -$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR600,mr600,,,,MR600)) -$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR900,mr900,,,,MR900)) -$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR1750,mr1750,,,,MR1750)) - -$(eval $(call SingleProfile,PB4X,128k,ALL0305,all0305,ALL0305,ttyS0,115200)) -$(eval $(call SingleProfile,PB4X,128k,EAP7660D,eap7660d,EAP7660D,ttyS0,115200)) -$(eval $(call SingleProfile,PB4X,64k,JA76PF,ja76pf,JA76PF,ttyS0,115200)) -$(eval $(call SingleProfile,PB4X,64k,JA76PF2,ja76pf2,JA76PF2,ttyS0,115200)) -$(eval $(call SingleProfile,PB4X,64k,JWAP003,jwap003,JWAP003,ttyS0,115200)) -$(eval $(call SingleProfile,PB4X,64k,PB42,pb42,PB42,ttyS0,115200)) -$(eval $(call SingleProfile,PB4X,64k,PB44,pb44,PB44,ttyS0,115200)) - -$(eval $(call SingleProfile,Planex,64kraw,MZKW04NU,mzk-w04nu,MZK-W04NU,ttyS0,115200)) -$(eval $(call SingleProfile,Planex,64kraw,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0,115200)) - -$(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout))) - -$(eval $(call SingleProfile,WRT400N,64k,WRT400N,wrt400n,WRT400N,ttyS0,115200)) - -$(eval $(call SingleProfile,WZRHP128K,128kraw,WZRHPG300NH,wzr-hp-g300nh,WZR-HP-G300NH,ttyS0,115200,WZR-HP-G300NH)) -$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG300NH2,wzr-hp-g300nh2,WZR-HP-G300NH2,ttyS0,115200,WZR-HP-G300NH2)) -$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPAG300H,wzr-hp-ag300h,WZR-HP-AG300H,ttyS0,115200,WZR-HP-AG300H)) -$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG450H,wzr-hp-g450h,WZR-HP-G450H,ttyS0,115200,WZR-HP-AG450H)) -$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR600DHP,wzr-600dhp,WZR-HP-AG300H,ttyS0,115200,WZR-600DHP)) -$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR450HP2,wzr-450hp2,WZR-450HP2,ttyS0,115200,WZR-450HP2)) - -$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H28,zcn-1523h-2-8,ZCN-1523H-2,ttyS0,115200,$$(zcn1523h_mtdlayout))) -$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,ttyS0,115200,$$(zcn1523h_mtdlayout))) - -endif # ifeq ($(SUBTARGET),generic) - - -ifeq ($(SUBTARGET),tiny) - -$(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC)) - -$(eval $(call SingleProfile,CameoAP91,64kraw,DIR600A1,dir-600-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-00")) -$(eval $(call SingleProfile,CameoAP91,64kraw,DIR601A1,dir-601-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-02")) -$(eval $(call SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-01")) - -$(eval $(call SingleProfile,CameoAP99,64kraw,EBR2310C1,ebr-2310-c1,EBR-2310-C1,ttyS0,115200,"AP91-AR7240-RT-090223-03")) -$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E1,dir-615-e1,DIR-615-E1,ttyS0,115200,"AP93-AR7240-RT-081028-00")) -$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E4,dir-615-e4,DIR-615-E4,ttyS0,115200,"AP99-AR7240-RT-091105-05")) - -$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I1,dir-615-i1,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-1012I1-00")) -$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I3,dir-615-i3,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-101214-00")) - -$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,A02RBW300N,a02-rb-w300n,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-03")) -$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,DIR615C1,dir-615-c1,DIR-615-C1,ttyS0,115200,"AP81-AR9130-RT-070614-02")) -$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW632BRP,tew-632brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-00")) -$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_FW,tew-652brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-080609-05")) -$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_RECOVERY,tew-652brp-recovery,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-02")) - -$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712BR,ttyATH0,115200,"HORNET-RT-TEW712BR-3",1.99,"")) -$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA")) - -$(eval $(call SingleProfile,MyLoader,64k,WP543_4M,wp543,,ttyS0,115200,0x400000,4M)) -$(eval $(call SingleProfile,MyLoader,64k,WPE72_4M,wpe72,,ttyS0,115200,0x400000,4M)) - -$(eval $(call SingleProfile,Netgear,64kraw,WNR2000V3,wnr2000v3,WNR2000V3,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303033,WNR2000V3,"" NA,-H 29763551+04+32)) -$(eval $(call SingleProfile,NetgearLzma,64kraw,WNR2000V4,wnr2000v4,WNR2000V4,ttyS0,115200,$$(wnr2000v4_mtdlayout),0x32303034,WNR2000V4,"" NA,)) -$(eval $(call SingleProfile,Netgear,64kraw,WNR2000,wnr2000,WNR2000,ttyS0,115200,$$(wnr2000_mtdlayout),0x32303031,WNR2000,"" NA,)) -$(eval $(call SingleProfile,Netgear,64kraw,REALWNR612V2,wnr612v2,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,WNR612V2,"",)) -$(eval $(call SingleProfile,Netgear,64kraw,N150R,n150r,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,N150R,"",)) -$(eval $(call SingleProfile,Netgear,64kraw,REALWNR1000V2,wnr1000v2,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303031,WNR1000V2,"",)) -$(eval $(call SingleProfile,Netgear,64kraw,WNR1000V2_VC,wnr1000v2-vc,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303030,WNR1000V2-VC,"",)) -$(eval $(call SingleProfile,Netgear,64kraw,WPN824N,wpn824n,WPN824N,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31313030,WPN824N,"" NA,)) - -$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N)) -$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPG300N,whr-hp-g300n,WHR-HP-G300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-G300N)) -$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPGN,whr-hp-gn,WHR-HP-GN,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-GN)) -$(eval $(call SingleProfile,WHRHPG300N,64kraw,WLAEAG300N,wlae-ag300n,WLAE-AG300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WLAE-AG300N)) - -$(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N)) - -endif # ifeq ($(SUBTARGET),tiny) - - -ifeq ($(SUBTARGET),nand) - -$(eval $(call SingleProfile,NetgearNAND,64k,WNDR3700V4,wndr3700v4,WNDR3700_V4,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR3700v4,"",-H 29763948+128+128,wndr4300)) -$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300V1,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3,wndr4300)) -$(eval $(call SingleProfile,NetgearNAND,64k,R6100,r6100,R6100,ttyS0,115200,$$(r6100_mtdlayout),0x36303030,R6100,"",-H 29764434+0+128+128+2x2+2x2,wndr4300)) - -$(eval $(call SingleProfile,ZyXELNAND,128k,NBG6716,nbg6716,NBG6716,ttyS0,115200,NBG6716,$$(zyx_nbg6716_mtdlayout),mem=256M)) - -endif # ifeq ($(SUBTARGET),nand) - -define Image/Build/squashfs - cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-raw - cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-64k - $(STAGING_DIR_HOST)/bin/padjffs2 $(KDIR)/root.squashfs-64k 64 - $(call prepare_generic_squashfs,$(KDIR)/root.squashfs) - dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync -endef - -define Image/Prepare - $(if $(wildcard $(ZYXEL_UBOOT_BIN)),cp $(ZYXEL_UBOOT_BIN) $(ZYXEL_UBOOT)) - $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma) -ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),) - $(call CompressLzma,$(KDIR)/vmlinux-initramfs,$(KDIR)/vmlinux-initramfs.bin.lzma) - $(call Image/BuildLoader,generic,elf,,,-initramfs) -endif - $(call Image/BuildLoader,generic,elf) -endef - -define Image/Prepare/Profile - $(call Image/Build/Profile/$(1),loader) -endef - -define Image/Build/Profile - $(call Image/Build/Profile/$(1),buildkernel) - $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),$(call Image/Build/Profile/$(1),initramfs)) - $(call Image/Build/Profile/$(1),$(2)) -endef - -# $(1): filesystem type. -define Image/Build - $(call Image/Build/$(call rootfs_type,$(1)),$(1)) -endef diff --git a/target/linux/ar71xx/image/lzma-loader/Makefile b/target/linux/ar71xx/image/lzma-loader/Makefile deleted file mode 100644 index 738093a958..0000000000 --- a/target/linux/ar71xx/image/lzma-loader/Makefile +++ /dev/null @@ -1,70 +0,0 @@ -# -# Copyright (C) 2011 OpenWrt.org -# Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -include $(TOPDIR)/rules.mk - -LZMA_TEXT_START := 0x80a00000 -LOADADDR := 0x80060000 -LOADER := loader.bin -LOADER_NAME := $(basename $(notdir $(LOADER))) -LOADER_DATA := -TARGET_DIR := -FLASH_OFFS := -FLASH_MAX := -BOARD := - -ifeq ($(TARGET_DIR),) -TARGET_DIR := $(KDIR) -endif - -LOADER_BIN := $(TARGET_DIR)/$(LOADER_NAME).bin -LOADER_GZ := $(TARGET_DIR)/$(LOADER_NAME).gz -LOADER_ELF := $(TARGET_DIR)/$(LOADER_NAME).elf - -PKG_NAME := lzma-loader -PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME) - -.PHONY : loader-compile loader.bin loader.elf loader.gz - -$(PKG_BUILD_DIR)/.prepared: - mkdir $(PKG_BUILD_DIR) - $(CP) ./src/* $(PKG_BUILD_DIR)/ - touch $@ - -loader-compile: $(PKG_BUILD_DIR)/.prepared - $(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE="$(TARGET_CROSS)" \ - LZMA_TEXT_START=$(LZMA_TEXT_START) \ - LOADADDR=$(LOADADDR) \ - LOADER_DATA=$(LOADER_DATA) \ - FLASH_OFFS=$(FLASH_OFFS) \ - FLASH_MAX=$(FLASH_MAX) \ - BOARD="$(BOARD)" \ - clean all - -loader.gz: $(PKG_BUILD_DIR)/loader.bin - # Workaround for buggy bootloaders: Some devices - # (TP-Link TL-WR1043ND v1) don't work correctly when - # the uncompressed loader is too small (probably a cache - # invalidation issue) - dd if=$< bs=512K conv=sync | gzip -nc9 > $(LOADER_GZ) - -loader.elf: $(PKG_BUILD_DIR)/loader.elf - $(CP) $< $(LOADER_ELF) - -loader.bin: $(PKG_BUILD_DIR)/loader.bin - $(CP) $< $(LOADER_BIN) - -download: -prepare: $(PKG_BUILD_DIR)/.prepared -compile: loader-compile - -install: - -clean: - rm -rf $(PKG_BUILD_DIR) - diff --git a/target/linux/ar71xx/image/lzma-loader/src/LzmaDecode.c b/target/linux/ar71xx/image/lzma-loader/src/LzmaDecode.c deleted file mode 100644 index cb8345377e..0000000000 --- a/target/linux/ar71xx/image/lzma-loader/src/LzmaDecode.c +++ /dev/null @@ -1,584 +0,0 @@ -/* - LzmaDecode.c - LZMA Decoder (optimized for Speed version) - - LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this Code, expressly permits you to - statically or dynamically link your Code (or bind by name) to the - interfaces of this file without subjecting your linked Code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#include "LzmaDecode.h" - -#define kNumTopBits 24 -#define kTopValue ((UInt32)1 << kNumTopBits) - -#define kNumBitModelTotalBits 11 -#define kBitModelTotal (1 << kNumBitModelTotalBits) -#define kNumMoveBits 5 - -#define RC_READ_BYTE (*Buffer++) - -#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \ - { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }} - -#ifdef _LZMA_IN_CB - -#define RC_TEST { if (Buffer == BufferLim) \ - { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \ - BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }} - -#define RC_INIT Buffer = BufferLim = 0; RC_INIT2 - -#else - -#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; } - -#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2 - -#endif - -#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; } - -#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound) -#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits; -#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits; - -#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \ - { UpdateBit0(p); mi <<= 1; A0; } else \ - { UpdateBit1(p); mi = (mi + mi) + 1; A1; } - -#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;) - -#define RangeDecoderBitTreeDecode(probs, numLevels, res) \ - { int i = numLevels; res = 1; \ - do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \ - res -= (1 << numLevels); } - - -#define kNumPosBitsMax 4 -#define kNumPosStatesMax (1 << kNumPosBitsMax) - -#define kLenNumLowBits 3 -#define kLenNumLowSymbols (1 << kLenNumLowBits) -#define kLenNumMidBits 3 -#define kLenNumMidSymbols (1 << kLenNumMidBits) -#define kLenNumHighBits 8 -#define kLenNumHighSymbols (1 << kLenNumHighBits) - -#define LenChoice 0 -#define LenChoice2 (LenChoice + 1) -#define LenLow (LenChoice2 + 1) -#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -#define kNumLenProbs (LenHigh + kLenNumHighSymbols) - - -#define kNumStates 12 -#define kNumLitStates 7 - -#define kStartPosModelIndex 4 -#define kEndPosModelIndex 14 -#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) - -#define kNumPosSlotBits 6 -#define kNumLenToPosStates 4 - -#define kNumAlignBits 4 -#define kAlignTableSize (1 << kNumAlignBits) - -#define kMatchMinLen 2 - -#define IsMatch 0 -#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -#define IsRepG0 (IsRep + kNumStates) -#define IsRepG1 (IsRepG0 + kNumStates) -#define IsRepG2 (IsRepG1 + kNumStates) -#define IsRep0Long (IsRepG2 + kNumStates) -#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -#define LenCoder (Align + kAlignTableSize) -#define RepLenCoder (LenCoder + kNumLenProbs) -#define Literal (RepLenCoder + kNumLenProbs) - -#if Literal != LZMA_BASE_SIZE -StopCompilingDueBUG -#endif - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size) -{ - unsigned char prop0; - if (size < LZMA_PROPERTIES_SIZE) - return LZMA_RESULT_DATA_ERROR; - prop0 = propsData[0]; - if (prop0 >= (9 * 5 * 5)) - return LZMA_RESULT_DATA_ERROR; - { - for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5)); - for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9); - propsRes->lc = prop0; - /* - unsigned char remainder = (unsigned char)(prop0 / 9); - propsRes->lc = prop0 % 9; - propsRes->pb = remainder / 5; - propsRes->lp = remainder % 5; - */ - } - - #ifdef _LZMA_OUT_READ - { - int i; - propsRes->DictionarySize = 0; - for (i = 0; i < 4; i++) - propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8); - if (propsRes->DictionarySize == 0) - propsRes->DictionarySize = 1; - } - #endif - return LZMA_RESULT_OK; -} - -#define kLzmaStreamWasFinishedId (-1) - -int LzmaDecode(CLzmaDecoderState *vs, - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback, - #else - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - #endif - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed) -{ - CProb *p = vs->Probs; - SizeT nowPos = 0; - Byte previousByte = 0; - UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1; - UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1; - int lc = vs->Properties.lc; - - #ifdef _LZMA_OUT_READ - - UInt32 Range = vs->Range; - UInt32 Code = vs->Code; - #ifdef _LZMA_IN_CB - const Byte *Buffer = vs->Buffer; - const Byte *BufferLim = vs->BufferLim; - #else - const Byte *Buffer = inStream; - const Byte *BufferLim = inStream + inSize; - #endif - int state = vs->State; - UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; - int len = vs->RemainLen; - UInt32 globalPos = vs->GlobalPos; - UInt32 distanceLimit = vs->DistanceLimit; - - Byte *dictionary = vs->Dictionary; - UInt32 dictionarySize = vs->Properties.DictionarySize; - UInt32 dictionaryPos = vs->DictionaryPos; - - Byte tempDictionary[4]; - - #ifndef _LZMA_IN_CB - *inSizeProcessed = 0; - #endif - *outSizeProcessed = 0; - if (len == kLzmaStreamWasFinishedId) - return LZMA_RESULT_OK; - - if (dictionarySize == 0) - { - dictionary = tempDictionary; - dictionarySize = 1; - tempDictionary[0] = vs->TempDictionary[0]; - } - - if (len == kLzmaNeedInitId) - { - { - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); - UInt32 i; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - rep0 = rep1 = rep2 = rep3 = 1; - state = 0; - globalPos = 0; - distanceLimit = 0; - dictionaryPos = 0; - dictionary[dictionarySize - 1] = 0; - #ifdef _LZMA_IN_CB - RC_INIT; - #else - RC_INIT(inStream, inSize); - #endif - } - len = 0; - } - while(len != 0 && nowPos < outSize) - { - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - len--; - } - if (dictionaryPos == 0) - previousByte = dictionary[dictionarySize - 1]; - else - previousByte = dictionary[dictionaryPos - 1]; - - #else /* if !_LZMA_OUT_READ */ - - int state = 0; - UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; - int len = 0; - const Byte *Buffer; - const Byte *BufferLim; - UInt32 Range; - UInt32 Code; - - #ifndef _LZMA_IN_CB - *inSizeProcessed = 0; - #endif - *outSizeProcessed = 0; - - { - UInt32 i; - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - } - - #ifdef _LZMA_IN_CB - RC_INIT; - #else - RC_INIT(inStream, inSize); - #endif - - #endif /* _LZMA_OUT_READ */ - - while(nowPos < outSize) - { - CProb *prob; - UInt32 bound; - int posState = (int)( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & posStateMask); - - prob = p + IsMatch + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - int symbol = 1; - UpdateBit0(prob) - prob = p + Literal + (LZMA_LIT_SIZE * - ((( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & literalPosMask) << lc) + (previousByte >> (8 - lc)))); - - if (state >= kNumLitStates) - { - int matchByte; - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - matchByte = dictionary[pos]; - #else - matchByte = outStream[nowPos - rep0]; - #endif - do - { - int bit; - CProb *probLit; - matchByte <<= 1; - bit = (matchByte & 0x100); - probLit = prob + 0x100 + bit + symbol; - RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break) - } - while (symbol < 0x100); - } - while (symbol < 0x100) - { - CProb *probLit = prob + symbol; - RC_GET_BIT(probLit, symbol) - } - previousByte = (Byte)symbol; - - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - if (distanceLimit < dictionarySize) - distanceLimit++; - - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #endif - if (state < 4) state = 0; - else if (state < 10) state -= 3; - else state -= 6; - } - else - { - UpdateBit1(prob); - prob = p + IsRep + state; - IfBit0(prob) - { - UpdateBit0(prob); - rep3 = rep2; - rep2 = rep1; - rep1 = rep0; - state = state < kNumLitStates ? 0 : 3; - prob = p + LenCoder; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG0 + state; - IfBit0(prob) - { - UpdateBit0(prob); - prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - #ifdef _LZMA_OUT_READ - UInt32 pos; - #endif - UpdateBit0(prob); - - #ifdef _LZMA_OUT_READ - if (distanceLimit == 0) - #else - if (nowPos == 0) - #endif - return LZMA_RESULT_DATA_ERROR; - - state = state < kNumLitStates ? 9 : 11; - #ifdef _LZMA_OUT_READ - pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - if (distanceLimit < dictionarySize) - distanceLimit++; - #endif - - continue; - } - else - { - UpdateBit1(prob); - } - } - else - { - UInt32 distance; - UpdateBit1(prob); - prob = p + IsRepG1 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep1; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG2 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep2; - } - else - { - UpdateBit1(prob); - distance = rep3; - rep3 = rep2; - } - rep2 = rep1; - } - rep1 = rep0; - rep0 = distance; - } - state = state < kNumLitStates ? 8 : 11; - prob = p + RepLenCoder; - } - { - int numBits, offset; - CProb *probLen = prob + LenChoice; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenLow + (posState << kLenNumLowBits); - offset = 0; - numBits = kLenNumLowBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenChoice2; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenMid + (posState << kLenNumMidBits); - offset = kLenNumLowSymbols; - numBits = kLenNumMidBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenHigh; - offset = kLenNumLowSymbols + kLenNumMidSymbols; - numBits = kLenNumHighBits; - } - } - RangeDecoderBitTreeDecode(probLen, numBits, len); - len += offset; - } - - if (state < 4) - { - int posSlot; - state += kNumLitStates; - prob = p + PosSlot + - ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << - kNumPosSlotBits); - RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot); - if (posSlot >= kStartPosModelIndex) - { - int numDirectBits = ((posSlot >> 1) - 1); - rep0 = (2 | ((UInt32)posSlot & 1)); - if (posSlot < kEndPosModelIndex) - { - rep0 <<= numDirectBits; - prob = p + SpecPos + rep0 - posSlot - 1; - } - else - { - numDirectBits -= kNumAlignBits; - do - { - RC_NORMALIZE - Range >>= 1; - rep0 <<= 1; - if (Code >= Range) - { - Code -= Range; - rep0 |= 1; - } - } - while (--numDirectBits != 0); - prob = p + Align; - rep0 <<= kNumAlignBits; - numDirectBits = kNumAlignBits; - } - { - int i = 1; - int mi = 1; - do - { - CProb *prob3 = prob + mi; - RC_GET_BIT2(prob3, mi, ; , rep0 |= i); - i <<= 1; - } - while(--numDirectBits != 0); - } - } - else - rep0 = posSlot; - if (++rep0 == (UInt32)(0)) - { - /* it's for stream version */ - len = kLzmaStreamWasFinishedId; - break; - } - } - - len += kMatchMinLen; - #ifdef _LZMA_OUT_READ - if (rep0 > distanceLimit) - #else - if (rep0 > nowPos) - #endif - return LZMA_RESULT_DATA_ERROR; - - #ifdef _LZMA_OUT_READ - if (dictionarySize - distanceLimit > (UInt32)len) - distanceLimit += len; - else - distanceLimit = dictionarySize; - #endif - - do - { - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - len--; - outStream[nowPos++] = previousByte; - } - while(len != 0 && nowPos < outSize); - } - } - RC_NORMALIZE; - - #ifdef _LZMA_OUT_READ - vs->Range = Range; - vs->Code = Code; - vs->DictionaryPos = dictionaryPos; - vs->GlobalPos = globalPos + (UInt32)nowPos; - vs->DistanceLimit = distanceLimit; - vs->Reps[0] = rep0; - vs->Reps[1] = rep1; - vs->Reps[2] = rep2; - vs->Reps[3] = rep3; - vs->State = state; - vs->RemainLen = len; - vs->TempDictionary[0] = tempDictionary[0]; - #endif - - #ifdef _LZMA_IN_CB - vs->Buffer = Buffer; - vs->BufferLim = BufferLim; - #else - *inSizeProcessed = (SizeT)(Buffer - inStream); - #endif - *outSizeProcessed = nowPos; - return LZMA_RESULT_OK; -} diff --git a/target/linux/ar71xx/image/lzma-loader/src/LzmaDecode.h b/target/linux/ar71xx/image/lzma-loader/src/LzmaDecode.h deleted file mode 100644 index 2870eeb9c9..0000000000 --- a/target/linux/ar71xx/image/lzma-loader/src/LzmaDecode.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - LzmaDecode.h - LZMA Decoder interface - - LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#ifndef __LZMADECODE_H -#define __LZMADECODE_H - -#include "LzmaTypes.h" - -/* #define _LZMA_IN_CB */ -/* Use callback for input data */ - -/* #define _LZMA_OUT_READ */ -/* Use read function for output data */ - -/* #define _LZMA_PROB32 */ -/* It can increase speed on some 32-bit CPUs, - but memory usage will be doubled in that case */ - -/* #define _LZMA_LOC_OPT */ -/* Enable local speed optimizations inside code */ - -#ifdef _LZMA_PROB32 -#define CProb UInt32 -#else -#define CProb UInt16 -#endif - -#define LZMA_RESULT_OK 0 -#define LZMA_RESULT_DATA_ERROR 1 - -#ifdef _LZMA_IN_CB -typedef struct _ILzmaInCallback -{ - int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize); -} ILzmaInCallback; -#endif - -#define LZMA_BASE_SIZE 1846 -#define LZMA_LIT_SIZE 768 - -#define LZMA_PROPERTIES_SIZE 5 - -typedef struct _CLzmaProperties -{ - int lc; - int lp; - int pb; - #ifdef _LZMA_OUT_READ - UInt32 DictionarySize; - #endif -}CLzmaProperties; - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size); - -#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp))) - -#define kLzmaNeedInitId (-2) - -typedef struct _CLzmaDecoderState -{ - CLzmaProperties Properties; - CProb *Probs; - - #ifdef _LZMA_IN_CB - const unsigned char *Buffer; - const unsigned char *BufferLim; - #endif - - #ifdef _LZMA_OUT_READ - unsigned char *Dictionary; - UInt32 Range; - UInt32 Code; - UInt32 DictionaryPos; - UInt32 GlobalPos; - UInt32 DistanceLimit; - UInt32 Reps[4]; - int State; - int RemainLen; - unsigned char TempDictionary[4]; - #endif -} CLzmaDecoderState; - -#ifdef _LZMA_OUT_READ -#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; } -#endif - -int LzmaDecode(CLzmaDecoderState *vs, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback, - #else - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - #endif - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed); - -#endif diff --git a/target/linux/ar71xx/image/lzma-loader/src/LzmaTypes.h b/target/linux/ar71xx/image/lzma-loader/src/LzmaTypes.h deleted file mode 100644 index 9c27290757..0000000000 --- a/target/linux/ar71xx/image/lzma-loader/src/LzmaTypes.h +++ /dev/null @@ -1,45 +0,0 @@ -/* -LzmaTypes.h - -Types for LZMA Decoder - -This file written and distributed to public domain by Igor Pavlov. -This file is part of LZMA SDK 4.40 (2006-05-01) -*/ - -#ifndef __LZMATYPES_H -#define __LZMATYPES_H - -#ifndef _7ZIP_BYTE_DEFINED -#define _7ZIP_BYTE_DEFINED -typedef unsigned char Byte; -#endif - -#ifndef _7ZIP_UINT16_DEFINED -#define _7ZIP_UINT16_DEFINED -typedef unsigned short UInt16; -#endif - -#ifndef _7ZIP_UINT32_DEFINED -#define _7ZIP_UINT32_DEFINED -#ifdef _LZMA_UINT32_IS_ULONG -typedef unsigned long UInt32; -#else -typedef unsigned int UInt32; -#endif -#endif - -/* #define _LZMA_NO_SYSTEM_SIZE_T */ -/* You can use it, if you don't want <stddef.h> */ - -#ifndef _7ZIP_SIZET_DEFINED -#define _7ZIP_SIZET_DEFINED -#ifdef _LZMA_NO_SYSTEM_SIZE_T -typedef UInt32 SizeT; -#else -#include <stddef.h> -typedef size_t SizeT; -#endif -#endif - -#endif diff --git a/target/linux/ar71xx/image/lzma-loader/src/Makefile b/target/linux/ar71xx/image/lzma-loader/src/Makefile deleted file mode 100644 index 7773f027a2..0000000000 --- a/target/linux/ar71xx/image/lzma-loader/src/Makefile +++ /dev/null @@ -1,108 +0,0 @@ -# -# Makefile for the LZMA compressed kernel loader for -# Atheros AR7XXX/AR9XXX based boards -# -# Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> -# -# Some parts of this file was based on the OpenWrt specific lzma-loader -# for the BCM47xx and ADM5120 based boards: -# Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org) -# Copyright (C) 2005 Mineharu Takahara <mtakahar@yahoo.com> -# Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> -# -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License version 2 as published -# by the Free Software Foundation. -# - -LOADADDR := -LZMA_TEXT_START := 0x80a00000 -LOADER_DATA := -BOARD := -FLASH_OFFS := -FLASH_MAX := - -CC := $(CROSS_COMPILE)gcc -LD := $(CROSS_COMPILE)ld -OBJCOPY := $(CROSS_COMPILE)objcopy -OBJDUMP := $(CROSS_COMPILE)objdump - -BIN_FLAGS := -O binary -R .reginfo -R .note -R .comment -R .mdebug \ - -R .MIPS.abiflags -S - -CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ - -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 \ - -mno-abicalls -fno-pic -ffunction-sections -pipe -mlong-calls \ - -fno-common -ffreestanding -fhonour-copts -nostartfiles \ - -mabi=32 -march=mips32r2 \ - -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap -CFLAGS += -D_LZMA_PROB32 -CFLAGS += -flto - -ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ - -LDFLAGS = -static -Wl,--gc-sections -Wl,-no-warn-mismatch -LDFLAGS += -Wl,-e,startup -T loader.lds -Wl,-Ttext,$(LZMA_TEXT_START) -LDFLAGS += -flto -fwhole-program - -O_FORMAT = $(shell $(OBJDUMP) -i | head -2 | grep elf32) - -OBJECTS := head.o loader.o cache.o board.o printf.o LzmaDecode.o - -ifneq ($(strip $(LOADER_DATA)),) -OBJECTS += data.o -CFLAGS += -DLZMA_WRAPPER=1 -DLOADADDR=$(LOADADDR) -endif - -ifneq ($(strip $(KERNEL_CMDLINE)),) -CFLAGS += -DCONFIG_KERNEL_CMDLINE='"$(KERNEL_CMDLINE)"' -endif - -ifneq ($(strip $(FLASH_OFFS)),) -CFLAGS += -DCONFIG_FLASH_OFFS=$(FLASH_OFFS) -endif - -ifneq ($(strip $(FLASH_MAX)),) -CFLAGS += -DCONFIG_FLASH_MAX=$(FLASH_MAX) -endif - -BOARD_DEF := $(shell echo $(strip $(BOARD)) | tr a-z A-Z | tr - _) -ifneq ($(BOARD_DEF),) -CFLAGS += -DCONFIG_BOARD_$(BOARD_DEF) -endif - -all: loader.elf - -# Don't build dependencies, this may die if $(CC) isn't gcc -dep: - -install: - -%.o : %.c - $(CC) $(CFLAGS) -c -o $@ $< - -%.o : %.S - $(CC) $(ASFLAGS) -c -o $@ $< - -data.o: $(LOADER_DATA) - $(LD) -r -b binary --oformat $(O_FORMAT) -T lzma-data.lds -o $@ $< - -loader: $(OBJECTS) - $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJECTS) - -loader.bin: loader - $(OBJCOPY) $(BIN_FLAGS) $< $@ - -loader2.o: loader.bin - $(LD) -r -b binary --oformat $(O_FORMAT) -o $@ $< - -loader.elf: loader2.o - $(LD) -z max-page-size=0x1000 -e startup -T loader2.lds -Ttext $(LOADADDR) -o $@ $< - -mrproper: clean - -clean: - rm -f loader *.elf *.bin *.o - - - diff --git a/target/linux/ar71xx/image/lzma-loader/src/ar71xx_regs.h b/target/linux/ar71xx/image/lzma-loader/src/ar71xx_regs.h deleted file mode 100644 index 19a4785bb4..0000000000 --- a/target/linux/ar71xx/image/lzma-loader/src/ar71xx_regs.h +++ /dev/null @@ -1,725 +0,0 @@ -/* - * Atheros AR71XX/AR724X/AR913X SoC register definitions - * - * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_AR71XX_REGS_H -#define __ASM_MACH_AR71XX_REGS_H - -#define BIT(_x) (1UL << (_x)) - -#define AR71XX_APB_BASE 0x18000000 -#define AR71XX_GE0_BASE 0x19000000 -#define AR71XX_GE0_SIZE 0x10000 -#define AR71XX_GE1_BASE 0x1a000000 -#define AR71XX_GE1_SIZE 0x10000 -#define AR71XX_EHCI_BASE 0x1b000000 -#define AR71XX_EHCI_SIZE 0x1000 -#define AR71XX_OHCI_BASE 0x1c000000 -#define AR71XX_OHCI_SIZE 0x1000 -#define AR71XX_SPI_BASE 0x1f000000 -#define AR71XX_SPI_SIZE 0x01000000 - -#define AR71XX_DDR_CTRL_BASE (AR71XX_APB_BASE + 0x00000000) -#define AR71XX_DDR_CTRL_SIZE 0x100 -#define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000) -#define AR71XX_UART_SIZE 0x100 -#define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) -#define AR71XX_USB_CTRL_SIZE 0x100 -#define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000) -#define AR71XX_GPIO_SIZE 0x100 -#define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000) -#define AR71XX_PLL_SIZE 0x100 -#define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) -#define AR71XX_RESET_SIZE 0x100 -#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000) -#define AR71XX_MII_SIZE 0x100 - -#define AR71XX_PCI_MEM_BASE 0x10000000 -#define AR71XX_PCI_MEM_SIZE 0x07000000 - -#define AR71XX_PCI_WIN0_OFFS 0x10000000 -#define AR71XX_PCI_WIN1_OFFS 0x11000000 -#define AR71XX_PCI_WIN2_OFFS 0x12000000 -#define AR71XX_PCI_WIN3_OFFS 0x13000000 -#define AR71XX_PCI_WIN4_OFFS 0x14000000 -#define AR71XX_PCI_WIN5_OFFS 0x15000000 -#define AR71XX_PCI_WIN6_OFFS 0x16000000 -#define AR71XX_PCI_WIN7_OFFS 0x07000000 - -#define AR71XX_PCI_CFG_BASE \ - (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000) -#define AR71XX_PCI_CFG_SIZE 0x100 - -#define AR7240_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) -#define AR7240_USB_CTRL_SIZE 0x100 -#define AR7240_OHCI_BASE 0x1b000000 -#define AR7240_OHCI_SIZE 0x1000 - -#define AR724X_PCI_MEM_BASE 0x10000000 -#define AR724X_PCI_MEM_SIZE 0x04000000 - -#define AR724X_PCI_CFG_BASE 0x14000000 -#define AR724X_PCI_CFG_SIZE 0x1000 -#define AR724X_PCI_CRP_BASE (AR71XX_APB_BASE + 0x000c0000) -#define AR724X_PCI_CRP_SIZE 0x1000 -#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000) -#define AR724X_PCI_CTRL_SIZE 0x100 - -#define AR724X_EHCI_BASE 0x1b000000 -#define AR724X_EHCI_SIZE 0x1000 - -#define AR913X_EHCI_BASE 0x1b000000 -#define AR913X_EHCI_SIZE 0x1000 -#define AR913X_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000) -#define AR913X_WMAC_SIZE 0x30000 - -#define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000) -#define AR933X_UART_SIZE 0x14 -#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -#define AR933X_GMAC_SIZE 0x04 -#define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) -#define AR933X_WMAC_SIZE 0x20000 -#define AR933X_EHCI_BASE 0x1b000000 -#define AR933X_EHCI_SIZE 0x1000 - -#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -#define AR934X_GMAC_SIZE 0x14 -#define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) -#define AR934X_WMAC_SIZE 0x20000 -#define AR934X_EHCI_BASE 0x1b000000 -#define AR934X_EHCI_SIZE 0x200 - -#define QCA955X_PCI_MEM_BASE0 0x10000000 -#define QCA955X_PCI_MEM_BASE1 0x12000000 -#define QCA955X_PCI_MEM_SIZE 0x02000000 -#define QCA955X_PCI_CFG_BASE0 0x14000000 -#define QCA955X_PCI_CFG_BASE1 0x16000000 -#define QCA955X_PCI_CFG_SIZE 0x1000 -#define QCA955X_PCI_CRP_BASE0 (AR71XX_APB_BASE + 0x000c0000) -#define QCA955X_PCI_CRP_BASE1 (AR71XX_APB_BASE + 0x00250000) -#define QCA955X_PCI_CRP_SIZE 0x1000 -#define QCA955X_PCI_CTRL_BASE0 (AR71XX_APB_BASE + 0x000f0000) -#define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000) -#define QCA955X_PCI_CTRL_SIZE 0x100 - -#define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) -#define QCA955X_WMAC_SIZE 0x20000 -#define QCA955X_EHCI0_BASE 0x1b000000 -#define QCA955X_EHCI1_BASE 0x1b400000 -#define QCA955X_EHCI_SIZE 0x1000 -#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -#define QCA955X_GMAC_SIZE 0x40 - -#define AR9300_OTP_BASE 0x14000 -#define AR9300_OTP_STATUS 0x15f18 -#define AR9300_OTP_STATUS_TYPE 0x7 -#define AR9300_OTP_STATUS_VALID 0x4 -#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2 -#define AR9300_OTP_STATUS_SM_BUSY 0x1 -#define AR9300_OTP_READ_DATA 0x15f1c - -/* - * DDR_CTRL block - */ -#define AR71XX_DDR_REG_PCI_WIN0 0x7c -#define AR71XX_DDR_REG_PCI_WIN1 0x80 -#define AR71XX_DDR_REG_PCI_WIN2 0x84 -#define AR71XX_DDR_REG_PCI_WIN3 0x88 -#define AR71XX_DDR_REG_PCI_WIN4 0x8c -#define AR71XX_DDR_REG_PCI_WIN5 0x90 -#define AR71XX_DDR_REG_PCI_WIN6 0x94 -#define AR71XX_DDR_REG_PCI_WIN7 0x98 -#define AR71XX_DDR_REG_FLUSH_GE0 0x9c -#define AR71XX_DDR_REG_FLUSH_GE1 0xa0 -#define AR71XX_DDR_REG_FLUSH_USB 0xa4 -#define AR71XX_DDR_REG_FLUSH_PCI 0xa8 - -#define AR724X_DDR_REG_FLUSH_GE0 0x7c -#define AR724X_DDR_REG_FLUSH_GE1 0x80 -#define AR724X_DDR_REG_FLUSH_USB 0x84 -#define AR724X_DDR_REG_FLUSH_PCIE 0x88 - -#define AR913X_DDR_REG_FLUSH_GE0 0x7c -#define AR913X_DDR_REG_FLUSH_GE1 0x80 -#define AR913X_DDR_REG_FLUSH_USB 0x84 -#define AR913X_DDR_REG_FLUSH_WMAC 0x88 - -#define AR933X_DDR_REG_FLUSH_GE0 0x7c -#define AR933X_DDR_REG_FLUSH_GE1 0x80 -#define AR933X_DDR_REG_FLUSH_USB 0x84 -#define AR933X_DDR_REG_FLUSH_WMAC 0x88 - -#define AR934X_DDR_REG_FLUSH_GE0 0x9c -#define AR934X_DDR_REG_FLUSH_GE1 0xa0 -#define AR934X_DDR_REG_FLUSH_USB 0xa4 -#define AR934X_DDR_REG_FLUSH_PCIE 0xa8 -#define AR934X_DDR_REG_FLUSH_WMAC 0xac - -/* - * PLL block - */ -#define AR71XX_PLL_REG_CPU_CONFIG 0x00 -#define AR71XX_PLL_REG_SEC_CONFIG 0x04 -#define AR71XX_PLL_REG_ETH0_INT_CLOCK 0x10 -#define AR71XX_PLL_REG_ETH1_INT_CLOCK 0x14 - -#define AR71XX_PLL_DIV_SHIFT 3 -#define AR71XX_PLL_DIV_MASK 0x1f -#define AR71XX_CPU_DIV_SHIFT 16 -#define AR71XX_CPU_DIV_MASK 0x3 -#define AR71XX_DDR_DIV_SHIFT 18 -#define AR71XX_DDR_DIV_MASK 0x3 -#define AR71XX_AHB_DIV_SHIFT 20 -#define AR71XX_AHB_DIV_MASK 0x7 - -#define AR71XX_ETH0_PLL_SHIFT 17 -#define AR71XX_ETH1_PLL_SHIFT 19 - -#define AR724X_PLL_REG_CPU_CONFIG 0x00 -#define AR724X_PLL_REG_PCIE_CONFIG 0x18 - -#define AR724X_PLL_DIV_SHIFT 0 -#define AR724X_PLL_DIV_MASK 0x3ff -#define AR724X_PLL_REF_DIV_SHIFT 10 -#define AR724X_PLL_REF_DIV_MASK 0xf -#define AR724X_AHB_DIV_SHIFT 19 -#define AR724X_AHB_DIV_MASK 0x1 -#define AR724X_DDR_DIV_SHIFT 22 -#define AR724X_DDR_DIV_MASK 0x3 - -#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c - -#define AR913X_PLL_REG_CPU_CONFIG 0x00 -#define AR913X_PLL_REG_ETH_CONFIG 0x04 -#define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14 -#define AR913X_PLL_REG_ETH1_INT_CLOCK 0x18 - -#define AR913X_PLL_DIV_SHIFT 0 -#define AR913X_PLL_DIV_MASK 0x3ff -#define AR913X_DDR_DIV_SHIFT 22 -#define AR913X_DDR_DIV_MASK 0x3 -#define AR913X_AHB_DIV_SHIFT 19 -#define AR913X_AHB_DIV_MASK 0x1 - -#define AR913X_ETH0_PLL_SHIFT 20 -#define AR913X_ETH1_PLL_SHIFT 22 - -#define AR933X_PLL_CPU_CONFIG_REG 0x00 -#define AR933X_PLL_CLOCK_CTRL_REG 0x08 - -#define AR933X_PLL_CPU_CONFIG_NINT_SHIFT 10 -#define AR933X_PLL_CPU_CONFIG_NINT_MASK 0x3f -#define AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT 16 -#define AR933X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f -#define AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT 23 -#define AR933X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7 - -#define AR933X_PLL_CLOCK_CTRL_BYPASS BIT(2) -#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT 5 -#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK 0x3 -#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT 10 -#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK 0x3 -#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT 15 -#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK 0x7 - -#define AR934X_PLL_CPU_CONFIG_REG 0x00 -#define AR934X_PLL_DDR_CONFIG_REG 0x04 -#define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08 -#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c - -#define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 -#define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -#define AR934X_PLL_CPU_CONFIG_NINT_SHIFT 6 -#define AR934X_PLL_CPU_CONFIG_NINT_MASK 0x3f -#define AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 -#define AR934X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f -#define AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 -#define AR934X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3 - -#define AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT 0 -#define AR934X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff -#define AR934X_PLL_DDR_CONFIG_NINT_SHIFT 10 -#define AR934X_PLL_DDR_CONFIG_NINT_MASK 0x3f -#define AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 -#define AR934X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f -#define AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 -#define AR934X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 - -#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS BIT(2) -#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS BIT(3) -#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS BIT(4) -#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT 5 -#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK 0x1f -#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT 10 -#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK 0x1f -#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT 15 -#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK 0x1f -#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20) -#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) -#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) - -#define QCA955X_PLL_CPU_CONFIG_REG 0x00 -#define QCA955X_PLL_DDR_CONFIG_REG 0x04 -#define QCA955X_PLL_CLK_CTRL_REG 0x08 - -#define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 -#define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -#define QCA955X_PLL_CPU_CONFIG_NINT_SHIFT 6 -#define QCA955X_PLL_CPU_CONFIG_NINT_MASK 0x3f -#define QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 -#define QCA955X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f -#define QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 -#define QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3 - -#define QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT 0 -#define QCA955X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff -#define QCA955X_PLL_DDR_CONFIG_NINT_SHIFT 10 -#define QCA955X_PLL_DDR_CONFIG_NINT_MASK 0x3f -#define QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 -#define QCA955X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f -#define QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 -#define QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 - -#define QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2) -#define QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3) -#define QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4) -#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5 -#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f -#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10 -#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f -#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15 -#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f -#define QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20) -#define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) -#define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) - -/* - * USB_CONFIG block - */ -#define AR71XX_USB_CTRL_REG_FLADJ 0x00 -#define AR71XX_USB_CTRL_REG_CONFIG 0x04 - -/* - * RESET block - */ -#define AR71XX_RESET_REG_TIMER 0x00 -#define AR71XX_RESET_REG_TIMER_RELOAD 0x04 -#define AR71XX_RESET_REG_WDOG_CTRL 0x08 -#define AR71XX_RESET_REG_WDOG 0x0c -#define AR71XX_RESET_REG_MISC_INT_STATUS 0x10 -#define AR71XX_RESET_REG_MISC_INT_ENABLE 0x14 -#define AR71XX_RESET_REG_PCI_INT_STATUS 0x18 -#define AR71XX_RESET_REG_PCI_INT_ENABLE 0x1c -#define AR71XX_RESET_REG_GLOBAL_INT_STATUS 0x20 -#define AR71XX_RESET_REG_RESET_MODULE 0x24 -#define AR71XX_RESET_REG_PERFC_CTRL 0x2c -#define AR71XX_RESET_REG_PERFC0 0x30 -#define AR71XX_RESET_REG_PERFC1 0x34 -#define AR71XX_RESET_REG_REV_ID 0x90 - -#define AR913X_RESET_REG_GLOBAL_INT_STATUS 0x18 -#define AR913X_RESET_REG_RESET_MODULE 0x1c -#define AR913X_RESET_REG_PERF_CTRL 0x20 -#define AR913X_RESET_REG_PERFC0 0x24 -#define AR913X_RESET_REG_PERFC1 0x28 - -#define AR724X_RESET_REG_RESET_MODULE 0x1c - -#define AR933X_RESET_REG_RESET_MODULE 0x1c -#define AR933X_RESET_REG_BOOTSTRAP 0xac - -#define AR934X_RESET_REG_RESET_MODULE 0x1c -#define AR934X_RESET_REG_BOOTSTRAP 0xb0 -#define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac - -#define QCA955X_RESET_REG_BOOTSTRAP 0xb0 -#define QCA955X_RESET_REG_EXT_INT_STATUS 0xac - -#define MISC_INT_ETHSW BIT(12) -#define MISC_INT_TIMER4 BIT(10) -#define MISC_INT_TIMER3 BIT(9) -#define MISC_INT_TIMER2 BIT(8) -#define MISC_INT_DMA BIT(7) -#define MISC_INT_OHCI BIT(6) -#define MISC_INT_PERFC BIT(5) -#define MISC_INT_WDOG BIT(4) -#define MISC_INT_UART BIT(3) -#define MISC_INT_GPIO BIT(2) -#define MISC_INT_ERROR BIT(1) -#define MISC_INT_TIMER BIT(0) - -#define AR71XX_RESET_EXTERNAL BIT(28) -#define AR71XX_RESET_FULL_CHIP BIT(24) -#define AR71XX_RESET_CPU_NMI BIT(21) -#define AR71XX_RESET_CPU_COLD BIT(20) -#define AR71XX_RESET_DMA BIT(19) -#define AR71XX_RESET_SLIC BIT(18) -#define AR71XX_RESET_STEREO BIT(17) -#define AR71XX_RESET_DDR BIT(16) -#define AR71XX_RESET_GE1_MAC BIT(13) -#define AR71XX_RESET_GE1_PHY BIT(12) -#define AR71XX_RESET_USBSUS_OVERRIDE BIT(10) -#define AR71XX_RESET_GE0_MAC BIT(9) -#define AR71XX_RESET_GE0_PHY BIT(8) -#define AR71XX_RESET_USB_OHCI_DLL BIT(6) -#define AR71XX_RESET_USB_HOST BIT(5) -#define AR71XX_RESET_USB_PHY BIT(4) -#define AR71XX_RESET_PCI_BUS BIT(1) -#define AR71XX_RESET_PCI_CORE BIT(0) - -#define AR7240_RESET_USB_HOST BIT(5) -#define AR7240_RESET_OHCI_DLL BIT(3) - -#define AR724X_RESET_GE1_MDIO BIT(23) -#define AR724X_RESET_GE0_MDIO BIT(22) -#define AR724X_RESET_PCIE_PHY_SERIAL BIT(10) -#define AR724X_RESET_PCIE_PHY BIT(7) -#define AR724X_RESET_PCIE BIT(6) -#define AR724X_RESET_USB_HOST BIT(5) -#define AR724X_RESET_USB_PHY BIT(4) -#define AR724X_RESET_USBSUS_OVERRIDE BIT(3) - -#define AR913X_RESET_AMBA2WMAC BIT(22) -#define AR913X_RESET_USBSUS_OVERRIDE BIT(10) -#define AR913X_RESET_USB_HOST BIT(5) -#define AR913X_RESET_USB_PHY BIT(4) - -#define AR933X_RESET_GE1_MDIO BIT(23) -#define AR933X_RESET_GE0_MDIO BIT(22) -#define AR933X_RESET_GE1_MAC BIT(13) -#define AR933X_RESET_WMAC BIT(11) -#define AR933X_RESET_GE0_MAC BIT(9) -#define AR933X_RESET_USB_HOST BIT(5) -#define AR933X_RESET_USB_PHY BIT(4) -#define AR933X_RESET_USBSUS_OVERRIDE BIT(3) - -#define AR934X_RESET_HOST BIT(31) -#define AR934X_RESET_SLIC BIT(30) -#define AR934X_RESET_HDMA BIT(29) -#define AR934X_RESET_EXTERNAL BIT(28) -#define AR934X_RESET_RTC BIT(27) -#define AR934X_RESET_PCIE_EP_INT BIT(26) -#define AR934X_RESET_CHKSUM_ACC BIT(25) -#define AR934X_RESET_FULL_CHIP BIT(24) -#define AR934X_RESET_GE1_MDIO BIT(23) -#define AR934X_RESET_GE0_MDIO BIT(22) -#define AR934X_RESET_CPU_NMI BIT(21) -#define AR934X_RESET_CPU_COLD BIT(20) -#define AR934X_RESET_HOST_RESET_INT BIT(19) -#define AR934X_RESET_PCIE_EP BIT(18) -#define AR934X_RESET_UART1 BIT(17) -#define AR934X_RESET_DDR BIT(16) -#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) -#define AR934X_RESET_NANDF BIT(14) -#define AR934X_RESET_GE1_MAC BIT(13) -#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12) -#define AR934X_RESET_USB_PHY_ANALOG BIT(11) -#define AR934X_RESET_HOST_DMA_INT BIT(10) -#define AR934X_RESET_GE0_MAC BIT(9) -#define AR934X_RESET_ETH_SWITCH BIT(8) -#define AR934X_RESET_PCIE_PHY BIT(7) -#define AR934X_RESET_PCIE BIT(6) -#define AR934X_RESET_USB_HOST BIT(5) -#define AR934X_RESET_USB_PHY BIT(4) -#define AR934X_RESET_USBSUS_OVERRIDE BIT(3) -#define AR934X_RESET_LUT BIT(2) -#define AR934X_RESET_MBOX BIT(1) -#define AR934X_RESET_I2S BIT(0) - -#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18) -#define AR933X_BOOTSTRAP_EEPBUSY BIT(4) -#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) - -#define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) -#define AR934X_BOOTSTRAP_SW_OPTION7 BIT(22) -#define AR934X_BOOTSTRAP_SW_OPTION6 BIT(21) -#define AR934X_BOOTSTRAP_SW_OPTION5 BIT(20) -#define AR934X_BOOTSTRAP_SW_OPTION4 BIT(19) -#define AR934X_BOOTSTRAP_SW_OPTION3 BIT(18) -#define AR934X_BOOTSTRAP_SW_OPTION2 BIT(17) -#define AR934X_BOOTSTRAP_SW_OPTION1 BIT(16) -#define AR934X_BOOTSTRAP_USB_MODE_DEVICE BIT(7) -#define AR934X_BOOTSTRAP_PCIE_RC BIT(6) -#define AR934X_BOOTSTRAP_EJTAG_MODE BIT(5) -#define AR934X_BOOTSTRAP_REF_CLK_40 BIT(4) -#define AR934X_BOOTSTRAP_BOOT_FROM_SPI BIT(2) -#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1) -#define AR934X_BOOTSTRAP_DDR1 BIT(0) - -#define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4) - -#define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) -#define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1) -#define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2) -#define AR934X_PCIE_WMAC_INT_WMAC_RXHP BIT(3) -#define AR934X_PCIE_WMAC_INT_PCIE_RC BIT(4) -#define AR934X_PCIE_WMAC_INT_PCIE_RC0 BIT(5) -#define AR934X_PCIE_WMAC_INT_PCIE_RC1 BIT(6) -#define AR934X_PCIE_WMAC_INT_PCIE_RC2 BIT(7) -#define AR934X_PCIE_WMAC_INT_PCIE_RC3 BIT(8) -#define AR934X_PCIE_WMAC_INT_WMAC_ALL \ - (AR934X_PCIE_WMAC_INT_WMAC_MISC | AR934X_PCIE_WMAC_INT_WMAC_TX | \ - AR934X_PCIE_WMAC_INT_WMAC_RXLP | AR934X_PCIE_WMAC_INT_WMAC_RXHP) - -#define AR934X_PCIE_WMAC_INT_PCIE_ALL \ - (AR934X_PCIE_WMAC_INT_PCIE_RC | AR934X_PCIE_WMAC_INT_PCIE_RC0 | \ - AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \ - AR934X_PCIE_WMAC_INT_PCIE_RC3) - -#define QCA955X_EXT_INT_WMAC_MISC BIT(0) -#define QCA955X_EXT_INT_WMAC_TX BIT(1) -#define QCA955X_EXT_INT_WMAC_RXLP BIT(2) -#define QCA955X_EXT_INT_WMAC_RXHP BIT(3) -#define QCA955X_EXT_INT_PCIE_RC1 BIT(4) -#define QCA955X_EXT_INT_PCIE_RC1_INT0 BIT(5) -#define QCA955X_EXT_INT_PCIE_RC1_INT1 BIT(6) -#define QCA955X_EXT_INT_PCIE_RC1_INT2 BIT(7) -#define QCA955X_EXT_INT_PCIE_RC1_INT3 BIT(8) -#define QCA955X_EXT_INT_PCIE_RC2 BIT(12) -#define QCA955X_EXT_INT_PCIE_RC2_INT0 BIT(13) -#define QCA955X_EXT_INT_PCIE_RC2_INT1 BIT(14) -#define QCA955X_EXT_INT_PCIE_RC2_INT2 BIT(15) -#define QCA955X_EXT_INT_PCIE_RC2_INT3 BIT(16) -#define QCA955X_EXT_INT_USB1 BIT(24) -#define QCA955X_EXT_INT_USB2 BIT(28) - -#define QCA955X_EXT_INT_WMAC_ALL \ - (QCA955X_EXT_INT_WMAC_MISC | QCA955X_EXT_INT_WMAC_TX | \ - QCA955X_EXT_INT_WMAC_RXLP | QCA955X_EXT_INT_WMAC_RXHP) - -#define QCA955X_EXT_INT_PCIE_RC1_ALL \ - (QCA955X_EXT_INT_PCIE_RC1 | QCA955X_EXT_INT_PCIE_RC1_INT0 | \ - QCA955X_EXT_INT_PCIE_RC1_INT1 | QCA955X_EXT_INT_PCIE_RC1_INT2 | \ - QCA955X_EXT_INT_PCIE_RC1_INT3) - -#define QCA955X_EXT_INT_PCIE_RC2_ALL \ - (QCA955X_EXT_INT_PCIE_RC2 | QCA955X_EXT_INT_PCIE_RC2_INT0 | \ - QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \ - QCA955X_EXT_INT_PCIE_RC2_INT3) - -#define REV_ID_MAJOR_MASK 0xfff0 -#define REV_ID_MAJOR_AR71XX 0x00a0 -#define REV_ID_MAJOR_AR913X 0x00b0 -#define REV_ID_MAJOR_AR7240 0x00c0 -#define REV_ID_MAJOR_AR7241 0x0100 -#define REV_ID_MAJOR_AR7242 0x1100 -#define REV_ID_MAJOR_AR9330 0x0110 -#define REV_ID_MAJOR_AR9331 0x1110 -#define REV_ID_MAJOR_AR9341 0x0120 -#define REV_ID_MAJOR_AR9342 0x1120 -#define REV_ID_MAJOR_AR9344 0x2120 -#define REV_ID_MAJOR_QCA9558 0x1130 - -#define AR71XX_REV_ID_MINOR_MASK 0x3 -#define AR71XX_REV_ID_MINOR_AR7130 0x0 -#define AR71XX_REV_ID_MINOR_AR7141 0x1 -#define AR71XX_REV_ID_MINOR_AR7161 0x2 -#define AR71XX_REV_ID_REVISION_MASK 0x3 -#define AR71XX_REV_ID_REVISION_SHIFT 2 - -#define AR913X_REV_ID_MINOR_MASK 0x3 -#define AR913X_REV_ID_MINOR_AR9130 0x0 -#define AR913X_REV_ID_MINOR_AR9132 0x1 -#define AR913X_REV_ID_REVISION_MASK 0x3 -#define AR913X_REV_ID_REVISION_SHIFT 2 - -#define AR933X_REV_ID_REVISION_MASK 0x3 - -#define AR724X_REV_ID_REVISION_MASK 0x3 - -#define AR934X_REV_ID_REVISION_MASK 0xf - -#define AR944X_REV_ID_REVISION_MASK 0xf - -/* - * SPI block - */ -#define AR71XX_SPI_REG_FS 0x00 /* Function Select */ -#define AR71XX_SPI_REG_CTRL 0x04 /* SPI Control */ -#define AR71XX_SPI_REG_IOC 0x08 /* SPI I/O Control */ -#define AR71XX_SPI_REG_RDS 0x0c /* Read Data Shift */ - -#define AR71XX_SPI_FS_GPIO BIT(0) /* Enable GPIO mode */ - -#define AR71XX_SPI_CTRL_RD BIT(6) /* Remap Disable */ -#define AR71XX_SPI_CTRL_DIV_MASK 0x3f - -#define AR71XX_SPI_IOC_DO BIT(0) /* Data Out pin */ -#define AR71XX_SPI_IOC_CLK BIT(8) /* CLK pin */ -#define AR71XX_SPI_IOC_CS(n) BIT(16 + (n)) -#define AR71XX_SPI_IOC_CS0 AR71XX_SPI_IOC_CS(0) -#define AR71XX_SPI_IOC_CS1 AR71XX_SPI_IOC_CS(1) -#define AR71XX_SPI_IOC_CS2 AR71XX_SPI_IOC_CS(2) -#define AR71XX_SPI_IOC_CS_ALL (AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1 | \ - AR71XX_SPI_IOC_CS2) - -/* - * GPIO block - */ -#define AR71XX_GPIO_REG_OE 0x00 -#define AR71XX_GPIO_REG_IN 0x04 -#define AR71XX_GPIO_REG_OUT 0x08 -#define AR71XX_GPIO_REG_SET 0x0c -#define AR71XX_GPIO_REG_CLEAR 0x10 -#define AR71XX_GPIO_REG_INT_MODE 0x14 -#define AR71XX_GPIO_REG_INT_TYPE 0x18 -#define AR71XX_GPIO_REG_INT_POLARITY 0x1c -#define AR71XX_GPIO_REG_INT_PENDING 0x20 -#define AR71XX_GPIO_REG_INT_ENABLE 0x24 -#define AR71XX_GPIO_REG_FUNC 0x28 - -#define AR934X_GPIO_REG_OUT_FUNC0 0x2c -#define AR934X_GPIO_REG_OUT_FUNC1 0x30 -#define AR934X_GPIO_REG_OUT_FUNC2 0x34 -#define AR934X_GPIO_REG_OUT_FUNC3 0x38 -#define AR934X_GPIO_REG_OUT_FUNC4 0x3c -#define AR934X_GPIO_REG_OUT_FUNC5 0x40 -#define AR934X_GPIO_REG_FUNC 0x6c - -#define AR71XX_GPIO_COUNT 16 -#define AR724X_GPIO_COUNT 18 -#define AR913X_GPIO_COUNT 22 -#define AR933X_GPIO_COUNT 30 -#define AR934X_GPIO_COUNT 23 -#define QCA955X_GPIO_COUNT 24 - -#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17) -#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16) -#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13) -#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12) -#define AR71XX_GPIO_FUNC_UART_EN BIT(8) -#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4) -#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0) - -#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19) -#define AR724X_GPIO_FUNC_SPI_EN BIT(18) -#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14) -#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13) -#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12) -#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11) -#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10) -#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9) -#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) -#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) -#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) -#define AR724X_GPIO_FUNC_UART_EN BIT(1) -#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0) - -#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22) -#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21) -#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20) -#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19) -#define AR913X_GPIO_FUNC_I2S1_EN BIT(18) -#define AR913X_GPIO_FUNC_I2S0_EN BIT(17) -#define AR913X_GPIO_FUNC_SLIC_EN BIT(16) -#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9) -#define AR913X_GPIO_FUNC_UART_EN BIT(8) -#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4) - -#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31) -#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30) -#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29) -#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27) -#define AR933X_GPIO_FUNC_I2SO_EN BIT(26) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23) -#define AR933X_GPIO_FUNC_SPI_EN BIT(18) -#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14) -#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) -#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) -#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) -#define AR933X_GPIO_FUNC_UART_EN BIT(1) -#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0) - -#define AR934X_GPIO_FUNC_DDR_DQOE_EN BIT(17) -#define AR934X_GPIO_FUNC_SPI_CS_1_EN BIT(14) -#define AR934X_GPIO_FUNC_SPI_CS_0_EN BIT(13) - -#define AR934X_GPIO_OUT_GPIO 0x00 - -/* - * MII_CTRL block - */ -#define AR71XX_MII_REG_MII0_CTRL 0x00 -#define AR71XX_MII_REG_MII1_CTRL 0x04 - -#define AR71XX_MII_CTRL_IF_MASK 3 -#define AR71XX_MII_CTRL_SPEED_SHIFT 4 -#define AR71XX_MII_CTRL_SPEED_MASK 3 -#define AR71XX_MII_CTRL_SPEED_10 0 -#define AR71XX_MII_CTRL_SPEED_100 1 -#define AR71XX_MII_CTRL_SPEED_1000 2 - -#define AR71XX_MII0_CTRL_IF_GMII 0 -#define AR71XX_MII0_CTRL_IF_MII 1 -#define AR71XX_MII0_CTRL_IF_RGMII 2 -#define AR71XX_MII0_CTRL_IF_RMII 3 - -#define AR71XX_MII1_CTRL_IF_RGMII 0 -#define AR71XX_MII1_CTRL_IF_RMII 1 - -/* - * AR933X GMAC interface - */ -#define AR933X_GMAC_REG_ETH_CFG 0x00 - -#define AR933X_ETH_CFG_RGMII_GE0 BIT(0) -#define AR933X_ETH_CFG_MII_GE0 BIT(1) -#define AR933X_ETH_CFG_GMII_GE0 BIT(2) -#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3) -#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4) -#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5) -#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7) -#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8) -#define AR933X_ETH_CFG_RMII_GE0 BIT(9) -#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0 -#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10) - -/* - * AR934X GMAC Interface - */ -#define AR934X_GMAC_REG_ETH_CFG 0x00 - -#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0) -#define AR934X_ETH_CFG_MII_GMAC0 BIT(1) -#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2) -#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3) -#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4) -#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5) -#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6) -#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7) -#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9) -#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10) -#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11) -#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12) -#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) - -/* - * QCA955X GMAC Interface - */ - -#define QCA955X_GMAC_REG_ETH_CFG 0x00 - -#define QCA955X_ETH_CFG_RGMII_GMAC0 BIT(0) -#define QCA955X_ETH_CFG_SGMII_GMAC0 BIT(6) - -#endif /* __ASM_MACH_AR71XX_REGS_H */ diff --git a/target/linux/ar71xx/image/lzma-loader/src/board.c b/target/linux/ar71xx/image/lzma-loader/src/board.c deleted file mode 100644 index 2f4dd6b1f6..0000000000 --- a/target/linux/ar71xx/image/lzma-loader/src/board.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <stddef.h> -#include "config.h" -#include "ar71xx_regs.h" - -#define READREG(r) *(volatile unsigned int *)(r) -#define WRITEREG(r,v) *(volatile unsigned int *)(r) = v - -#define KSEG1ADDR(_x) (((_x) & 0x1fffffff) | 0xa0000000) - -#define UART_BASE 0xb8020000 - -#define UART_TX 0 -#define UART_LSR 5 - -#define UART_LSR_THRE 0x20 - -#define UART_READ(r) READREG(UART_BASE + 4 * (r)) -#define UART_WRITE(r,v) WRITEREG(UART_BASE + 4 * (r), (v)) - -void board_putc(int ch) -{ - while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0); - UART_WRITE(UART_TX, ch); - while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0); -} - -#ifdef CONFIG_BOARD_TL_WR1043ND_V1 -static void tlwr1043nd_init(void) -{ - unsigned int reg = KSEG1ADDR(AR71XX_RESET_BASE); - unsigned int t; - - t = READREG(reg + AR913X_RESET_REG_RESET_MODULE); - t |= AR71XX_RESET_GE0_PHY; - WRITEREG(reg + AR913X_RESET_REG_RESET_MODULE, t); - /* flush write */ - t = READREG(reg + AR913X_RESET_REG_RESET_MODULE); -} -#else -static inline void tlwr1043nd_init(void) {} -#endif - -void board_init(void) -{ - tlwr1043nd_init(); -} diff --git a/target/linux/ar71xx/image/lzma-loader/src/cache.c b/target/linux/ar71xx/image/lzma-loader/src/cache.c deleted file mode 100644 index 28cc848333..0000000000 --- a/target/linux/ar71xx/image/lzma-loader/src/cache.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * The cache manipulation routine has been taken from the U-Boot project. - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#include "cache.h" -#include "cacheops.h" -#include "config.h" - -#define cache_op(op,addr) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips3\n\t \n" \ - " cache %0, %1 \n" \ - " .set pop \n" \ - : \ - : "i" (op), "R" (*(unsigned char *)(addr))) - -void flush_cache(unsigned long start_addr, unsigned long size) -{ - unsigned long lsize = CONFIG_CACHELINE_SIZE; - unsigned long addr = start_addr & ~(lsize - 1); - unsigned long aend = (start_addr + size - 1) & ~(lsize - 1); - - while (1) { - cache_op(Hit_Writeback_Inv_D, addr); - cache_op(Hit_Invalidate_I, addr); - if (addr == aend) - break; - addr += lsize; - } -} diff --git a/target/linux/ar71xx/image/lzma-loader/src/cache.h b/target/linux/ar71xx/image/lzma-loader/src/cache.h deleted file mode 100644 index 506a235884..0000000000 --- a/target/linux/ar71xx/image/lzma-loader/src/cache.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef __CACHE_H -#define __CACHE_H - -void flush_cache(unsigned long start_addr, unsigned long size); - -#endif /* __CACHE_H */ diff --git a/target/linux/ar71xx/image/lzma-loader/src/cacheops.h b/target/linux/ar71xx/image/lzma-loader/src/cacheops.h deleted file mode 100644 index 70bcad7694..0000000000 --- a/target/linux/ar71xx/image/lzma-loader/src/cacheops.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Cache operations for the cache instruction. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle - * (C) Copyright 1999 Silicon Graphics, Inc. - */ -#ifndef __ASM_CACHEOPS_H -#define __ASM_CACHEOPS_H - -/* - * Cache Operations available on all MIPS processors with R4000-style caches - */ -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 -#define Index_Load_Tag_I 0x04 -#define Index_Load_Tag_D 0x05 -#define Index_Store_Tag_I 0x08 -#define Index_Store_Tag_D 0x09 -#if defined(CONFIG_CPU_LOONGSON2) -#define Hit_Invalidate_I 0x00 -#else -#define Hit_Invalidate_I 0x10 -#endif -#define Hit_Invalidate_D 0x11 -#define Hit_Writeback_Inv_D 0x15 - -/* - * R4000-specific cacheops - */ -#define Create_Dirty_Excl_D 0x0d -#define Fill 0x14 -#define Hit_Writeback_I 0x18 -#define Hit_Writeback_D 0x19 - -/* - * R4000SC and R4400SC-specific cacheops - */ -#define Index_Invalidate_SI 0x02 -#define Index_Writeback_Inv_SD 0x03 -#define Index_Load_Tag_SI 0x06 -#define Index_Load_Tag_SD 0x07 -#define Index_Store_Tag_SI 0x0A -#define Index_Store_Tag_SD 0x0B -#define Create_Dirty_Excl_SD 0x0f -#define Hit_Invalidate_SI 0x12 -#define Hit_Invalidate_SD 0x13 -#define Hit_Writeback_Inv_SD 0x17 -#define Hit_Writeback_SD 0x1b -#define Hit_Set_Virtual_SI 0x1e -#define Hit_Set_Virtual_SD 0x1f - -/* - * R5000-specific cacheops - */ -#define R5K_Page_Invalidate_S 0x17 - -/* - * RM7000-specific cacheops - */ -#define Page_Invalidate_T 0x16 - -/* - * R10000-specific cacheops - * - * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused. - * Most of the _S cacheops are identical to the R4000SC _SD cacheops. - */ -#define Index_Writeback_Inv_S 0x03 -#define Index_Load_Tag_S 0x07 -#define Index_Store_Tag_S 0x0B -#define Hit_Invalidate_S 0x13 -#define Cache_Barrier 0x14 -#define Hit_Writeback_Inv_S 0x17 -#define Index_Load_Data_I 0x18 -#define Index_Load_Data_D 0x19 -#define Index_Load_Data_S 0x1b -#define Index_Store_Data_I 0x1c -#define Index_Store_Data_D 0x1d -#define Index_Store_Data_S 0x1f - -#endif /* __ASM_CACHEOPS_H */ diff --git a/target/linux/ar71xx/image/lzma-loader/src/config.h b/target/linux/ar71xx/image/lzma-loader/src/config.h deleted file mode 100644 index 287392b340..0000000000 --- a/target/linux/ar71xx/image/lzma-loader/src/config.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _CONFIG_H_ -#define _CONFIG_H_ - -#define CONFIG_ICACHE_SIZE (32 * 1024) -#define CONFIG_DCACHE_SIZE (64 * 1024) -#define CONFIG_CACHELINE_SIZE 32 - -#ifndef CONFIG_FLASH_OFFS -#define CONFIG_FLASH_OFFS 0 -#endif - -#ifndef CONFIG_FLASH_MAX -#define CONFIG_FLASH_MAX 0 -#endif - -#ifndef CONFIG_FLASH_STEP -#define CONFIG_FLASH_STEP 0x1000 -#endif - -#endif /* _CONFIG_H_ */ diff --git a/target/linux/ar71xx/image/lzma-loader/src/cp0regdef.h b/target/linux/ar71xx/image/lzma-loader/src/cp0regdef.h deleted file mode 100644 index c1188ad8c8..0000000000 --- a/target/linux/ar71xx/image/lzma-loader/src/cp0regdef.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle - * - * Copyright (C) 2001, Monta Vista Software - * Author: jsun@mvista.com or jsun@junsun.net - */ -#ifndef _cp0regdef_h_ -#define _cp0regdef_h_ - -#define CP0_INDEX $0 -#define CP0_RANDOM $1 -#define CP0_ENTRYLO0 $2 -#define CP0_ENTRYLO1 $3 -#define CP0_CONTEXT $4 -#define CP0_PAGEMASK $5 -#define CP0_WIRED $6 -#define CP0_BADVADDR $8 -#define CP0_COUNT $9 -#define CP0_ENTRYHI $10 -#define CP0_COMPARE $11 -#define CP0_STATUS $12 -#define CP0_CAUSE $13 -#define CP0_EPC $14 -#define CP0_PRID $15 -#define CP0_CONFIG $16 -#define CP0_LLADDR $17 -#define CP0_WATCHLO $18 -#define CP0_WATCHHI $19 -#define CP0_XCONTEXT $20 -#define CP0_FRAMEMASK $21 -#define CP0_DIAGNOSTIC $22 -#define CP0_PERFORMANCE $25 -#define CP0_ECC $26 -#define CP0_CACHEERR $27 -#define CP0_TAGLO $28 -#define CP0_TAGHI $29 -#define CP0_ERROREPC $30 - -#endif diff --git a/target/linux/ar71xx/image/lzma-loader/src/head.S b/target/linux/ar71xx/image/lzma-loader/src/head.S deleted file mode 100644 index d414b14d11..0000000000 --- a/target/linux/ar71xx/image/lzma-loader/src/head.S +++ /dev/null @@ -1,134 +0,0 @@ -/* - * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * Some parts of this code was based on the OpenWrt specific lzma-loader - * for the BCM47xx and ADM5120 based boards: - * Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org) - * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/asm.h> -#include <asm/regdef.h> -#include "cp0regdef.h" -#include "cacheops.h" -#include "config.h" - -#define KSEG0 0x80000000 - - .macro ehb - sll zero, 3 - .endm - - .text - -LEAF(startup) - .set noreorder - .set mips32 - - mtc0 zero, CP0_WATCHLO # clear watch registers - mtc0 zero, CP0_WATCHHI - mtc0 zero, CP0_CAUSE # clear before writing status register - - mfc0 t0, CP0_STATUS - li t1, 0x1000001f - or t0, t1 - xori t0, 0x1f - mtc0 t0, CP0_STATUS - ehb - - /* - * Some bootloaders set the 'Kseg0 coherency algorithm' to - * 'Cacheable, noncoherent, write-through, no write allocate' - * and this cause performance issues. Let's go and change it to - * 'Cacheable, noncoherent, write-back, write allocate' - */ - mfc0 t0, CP0_CONFIG - li t1, ~7 #~CONF_CM_CMASK - and t0, t1 - ori t0, 3 #CONF_CM_CACHABLE_NONCOHERENT - mtc0 t0, CP0_CONFIG - nop - - mtc0 zero, CP0_COUNT - mtc0 zero, CP0_COMPARE - ehb - - la t0, __reloc_label # get linked address of label - bal __reloc_label # branch and link to label to - nop # get actual address -__reloc_label: - subu t0, ra, t0 # get reloc_delta - - beqz t0, __reloc_done # if delta is 0 we are in the right place - nop - - /* Copy our code to the right place */ - la t1, _code_start # get linked address of _code_start - la t2, _code_end # get linked address of _code_end - addu t0, t0, t1 # calculate actual address of _code_start - -__reloc_copy: - lw t3, 0(t0) - sw t3, 0(t1) - add t1, 4 - blt t1, t2, __reloc_copy - add t0, 4 - - /* flush cache */ - la t0, _code_start - la t1, _code_end - - li t2, ~(CONFIG_CACHELINE_SIZE - 1) - and t0, t2 - and t1, t2 - li t2, CONFIG_CACHELINE_SIZE - - b __flush_check - nop - -__flush_line: - cache Hit_Writeback_Inv_D, 0(t0) - cache Hit_Invalidate_I, 0(t0) - add t0, t2 - -__flush_check: - bne t0, t1, __flush_line - nop - - sync - -__reloc_done: - - /* clear bss */ - la t0, _bss_start - la t1, _bss_end - b __bss_check - nop - -__bss_fill: - sw zero, 0(t0) - addi t0, 4 - -__bss_check: - bne t0, t1, __bss_fill - nop - - /* Setup new "C" stack */ - la sp, _stack - - /* reserve stack space for a0-a3 registers */ - subu sp, 16 - - /* jump to the decompressor routine */ - la t0, loader_main - jr t0 - nop - - .set reorder -END(startup) diff --git a/target/linux/ar71xx/image/lzma-loader/src/loader.c b/target/linux/ar71xx/image/lzma-loader/src/loader.c deleted file mode 100644 index 794c4b6285..0000000000 --- a/target/linux/ar71xx/image/lzma-loader/src/loader.c +++ /dev/null @@ -1,264 +0,0 @@ -/* - * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * Some parts of this code was based on the OpenWrt specific lzma-loader - * for the BCM47xx and ADM5120 based boards: - * Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org) - * Copyright (C) 2005 Mineharu Takahara <mtakahar@yahoo.com> - * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su> - * - * The image_header structure has been taken from the U-Boot project. - * (C) Copyright 2008 Semihalf - * (C) Copyright 2000-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <stddef.h> -#include <stdint.h> - -#include "config.h" -#include "cache.h" -#include "printf.h" -#include "LzmaDecode.h" - -#define AR71XX_FLASH_START 0x1f000000 -#define AR71XX_FLASH_END 0x1fe00000 - -#define KSEG0 0x80000000 -#define KSEG1 0xa0000000 - -#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1) - -#undef LZMA_DEBUG - -#ifdef LZMA_DEBUG -# define DBG(f, a...) printf(f, ## a) -#else -# define DBG(f, a...) do {} while (0) -#endif - -#define IH_MAGIC_OKLI 0x4f4b4c49 /* 'OKLI' */ - -#define IH_NMLEN 32 /* Image Name Length */ - -typedef struct image_header { - uint32_t ih_magic; /* Image Header Magic Number */ - uint32_t ih_hcrc; /* Image Header CRC Checksum */ - uint32_t ih_time; /* Image Creation Timestamp */ - uint32_t ih_size; /* Image Data Size */ - uint32_t ih_load; /* Data Load Address */ - uint32_t ih_ep; /* Entry Point Address */ - uint32_t ih_dcrc; /* Image Data CRC Checksum */ - uint8_t ih_os; /* Operating System */ - uint8_t ih_arch; /* CPU architecture */ - uint8_t ih_type; /* Image Type */ - uint8_t ih_comp; /* Compression Type */ - uint8_t ih_name[IH_NMLEN]; /* Image Name */ -} image_header_t; - -/* beyond the image end, size not known in advance */ -extern unsigned char workspace[]; -extern void board_init(void); - -static CLzmaDecoderState lzma_state; -static unsigned char *lzma_data; -static unsigned long lzma_datasize; -static unsigned long lzma_outsize; -static unsigned long kernel_la; - -#ifdef CONFIG_KERNEL_CMDLINE -#define kernel_argc 2 -static const char kernel_cmdline[] = CONFIG_KERNEL_CMDLINE; -static const char *const kernel_argv[] = { - NULL, - kernel_cmdline, - NULL, -}; -#endif /* CONFIG_KERNEL_CMDLINE */ - -static void halt(void) -{ - printf("\nSystem halted!\n"); - for(;;); -} - -static __inline__ unsigned long get_be32(void *buf) -{ - unsigned char *p = buf; - - return (((unsigned long) p[0] << 24) + - ((unsigned long) p[1] << 16) + - ((unsigned long) p[2] << 8) + - (unsigned long) p[3]); -} - -static __inline__ unsigned char lzma_get_byte(void) -{ - unsigned char c; - - lzma_datasize--; - c = *lzma_data++; - - return c; -} - -static int lzma_init_props(void) -{ - unsigned char props[LZMA_PROPERTIES_SIZE]; - int res; - int i; - - /* read lzma properties */ - for (i = 0; i < LZMA_PROPERTIES_SIZE; i++) - props[i] = lzma_get_byte(); - - /* read the lower half of uncompressed size in the header */ - lzma_outsize = ((SizeT) lzma_get_byte()) + - ((SizeT) lzma_get_byte() << 8) + - ((SizeT) lzma_get_byte() << 16) + - ((SizeT) lzma_get_byte() << 24); - - /* skip rest of the header (upper half of uncompressed size) */ - for (i = 0; i < 4; i++) - lzma_get_byte(); - - res = LzmaDecodeProperties(&lzma_state.Properties, props, - LZMA_PROPERTIES_SIZE); - return res; -} - -static int lzma_decompress(unsigned char *outStream) -{ - SizeT ip, op; - int ret; - - lzma_state.Probs = (CProb *) workspace; - - ret = LzmaDecode(&lzma_state, lzma_data, lzma_datasize, &ip, outStream, - lzma_outsize, &op); - - if (ret != LZMA_RESULT_OK) { - int i; - - DBG("LzmaDecode error %d at %08x, osize:%d ip:%d op:%d\n", - ret, lzma_data + ip, lzma_outsize, ip, op); - - for (i = 0; i < 16; i++) - DBG("%02x ", lzma_data[ip + i]); - - DBG("\n"); - } - - return ret; -} - -#if (LZMA_WRAPPER) -static void lzma_init_data(void) -{ - extern unsigned char _lzma_data_start[]; - extern unsigned char _lzma_data_end[]; - - kernel_la = LOADADDR; - lzma_data = _lzma_data_start; - lzma_datasize = _lzma_data_end - _lzma_data_start; -} -#else -static void lzma_init_data(void) -{ - struct image_header *hdr = NULL; - unsigned char *flash_base; - unsigned long flash_ofs; - unsigned long kernel_ofs; - unsigned long kernel_size; - - flash_base = (unsigned char *) KSEG1ADDR(AR71XX_FLASH_START); - - printf("Looking for OpenWrt image... "); - - for (flash_ofs = CONFIG_FLASH_OFFS; - flash_ofs <= (CONFIG_FLASH_OFFS + CONFIG_FLASH_MAX); - flash_ofs += CONFIG_FLASH_STEP) { - unsigned long magic; - unsigned char *p; - - p = flash_base + flash_ofs; - magic = get_be32(p); - if (magic == IH_MAGIC_OKLI) { - hdr = (struct image_header *) p; - break; - } - } - - if (hdr == NULL) { - printf("not found!\n"); - halt(); - } - - printf("found at 0x%08x\n", flash_base + flash_ofs); - - kernel_ofs = sizeof(struct image_header); - kernel_size = get_be32(&hdr->ih_size); - kernel_la = get_be32(&hdr->ih_load); - - lzma_data = flash_base + flash_ofs + kernel_ofs; - lzma_datasize = kernel_size; -} -#endif /* (LZMA_WRAPPER) */ - -void loader_main(unsigned long reg_a0, unsigned long reg_a1, - unsigned long reg_a2, unsigned long reg_a3) -{ - void (*kernel_entry) (unsigned long, unsigned long, unsigned long, - unsigned long); - int res; - - board_init(); - - printf("\n\nOpenWrt kernel loader for AR7XXX/AR9XXX\n"); - printf("Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>\n"); - - lzma_init_data(); - - res = lzma_init_props(); - if (res != LZMA_RESULT_OK) { - printf("Incorrect LZMA stream properties!\n"); - halt(); - } - - printf("Decompressing kernel... "); - - res = lzma_decompress((unsigned char *) kernel_la); - if (res != LZMA_RESULT_OK) { - printf("failed, "); - switch (res) { - case LZMA_RESULT_DATA_ERROR: - printf("data error!\n"); - break; - default: - printf("unknown error %d!\n", res); - } - halt(); - } else { - printf("done!\n"); - } - - flush_cache(kernel_la, lzma_outsize); - - printf("Starting kernel at %08x...\n\n", kernel_la); - -#ifdef CONFIG_KERNEL_CMDLINE - reg_a0 = kernel_argc; - reg_a1 = (unsigned long) kernel_argv; - reg_a2 = 0; - reg_a3 = 0; -#endif - - kernel_entry = (void *) kernel_la; - kernel_entry(reg_a0, reg_a1, reg_a2, reg_a3); -} diff --git a/target/linux/ar71xx/image/lzma-loader/src/loader.lds b/target/linux/ar71xx/image/lzma-loader/src/loader.lds deleted file mode 100644 index 01ff852361..0000000000 --- a/target/linux/ar71xx/image/lzma-loader/src/loader.lds +++ /dev/null @@ -1,34 +0,0 @@ -OUTPUT_ARCH(mips) -SECTIONS { - .text : { - _code_start = .; - *(.text) - *(.text.*) - *(.rodata) - *(.rodata.*) - *(.data.lzma) - } - - . = ALIGN(32); - .data : { - *(.data) - *(.data.*) - } - - . = ALIGN(32); - _code_end = .; - - _bss_start = .; - .bss : { - *(.bss) - *(.bss.*) - } - - . = ALIGN(32); - _bss_end = .; - - . = . + 8192; - _stack = .; - - workspace = .; -} diff --git a/target/linux/ar71xx/image/lzma-loader/src/loader2.lds b/target/linux/ar71xx/image/lzma-loader/src/loader2.lds deleted file mode 100644 index db0bb46424..0000000000 --- a/target/linux/ar71xx/image/lzma-loader/src/loader2.lds +++ /dev/null @@ -1,10 +0,0 @@ -OUTPUT_ARCH(mips) -SECTIONS { - .text : { - startup = .; - *(.text) - *(.text.*) - *(.data) - *(.data.*) - } -} diff --git a/target/linux/ar71xx/image/lzma-loader/src/lzma-data.lds b/target/linux/ar71xx/image/lzma-loader/src/lzma-data.lds deleted file mode 100644 index abf756ba13..0000000000 --- a/target/linux/ar71xx/image/lzma-loader/src/lzma-data.lds +++ /dev/null @@ -1,8 +0,0 @@ -OUTPUT_ARCH(mips) -SECTIONS { - .data.lzma : { - _lzma_data_start = .; - *(.data) - _lzma_data_end = .; - } -} diff --git a/target/linux/ar71xx/image/lzma-loader/src/printf.c b/target/linux/ar71xx/image/lzma-loader/src/printf.c deleted file mode 100644 index 7bb5a86e18..0000000000 --- a/target/linux/ar71xx/image/lzma-loader/src/printf.c +++ /dev/null @@ -1,350 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include "printf.h" - -extern void board_putc(int ch); - -/* this is the maximum width for a variable */ -#define LP_MAX_BUF 256 - -/* macros */ -#define IsDigit(x) ( ((x) >= '0') && ((x) <= '9') ) -#define Ctod(x) ( (x) - '0') - -/* forward declaration */ -static int PrintChar(char *, char, int, int); -static int PrintString(char *, char *, int, int); -static int PrintNum(char *, unsigned long, int, int, int, int, char, int); - -/* private variable */ -static const char theFatalMsg[] = "fatal error in lp_Print!"; - -/* -*- - * A low level printf() function. - */ -static void -lp_Print(void (*output)(void *, char *, int), - void * arg, - char *fmt, - va_list ap) -{ - -#define OUTPUT(arg, s, l) \ - { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \ - (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \ - } else { \ - (*output)(arg, s, l); \ - } \ - } - - char buf[LP_MAX_BUF]; - - char c; - char *s; - long int num; - - int longFlag; - int negFlag; - int width; - int prec; - int ladjust; - char padc; - - int length; - - for(;;) { - { - /* scan for the next '%' */ - char *fmtStart = fmt; - while ( (*fmt != '\0') && (*fmt != '%')) { - fmt ++; - } - - /* flush the string found so far */ - OUTPUT(arg, fmtStart, fmt-fmtStart); - - /* are we hitting the end? */ - if (*fmt == '\0') break; - } - - /* we found a '%' */ - fmt ++; - - /* check for long */ - if (*fmt == 'l') { - longFlag = 1; - fmt ++; - } else { - longFlag = 0; - } - - /* check for other prefixes */ - width = 0; - prec = -1; - ladjust = 0; - padc = ' '; - - if (*fmt == '-') { - ladjust = 1; - fmt ++; - } - - if (*fmt == '0') { - padc = '0'; - fmt++; - } - - if (IsDigit(*fmt)) { - while (IsDigit(*fmt)) { - width = 10 * width + Ctod(*fmt++); - } - } - - if (*fmt == '.') { - fmt ++; - if (IsDigit(*fmt)) { - prec = 0; - while (IsDigit(*fmt)) { - prec = prec*10 + Ctod(*fmt++); - } - } - } - - - /* check format flag */ - negFlag = 0; - switch (*fmt) { - case 'b': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'd': - case 'D': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - if (num < 0) { - num = - num; - negFlag = 1; - } - length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'o': - case 'O': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'u': - case 'U': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'x': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'X': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1); - OUTPUT(arg, buf, length); - break; - - case 'c': - c = (char)va_arg(ap, int); - length = PrintChar(buf, c, width, ladjust); - OUTPUT(arg, buf, length); - break; - - case 's': - s = (char*)va_arg(ap, char *); - length = PrintString(buf, s, width, ladjust); - OUTPUT(arg, buf, length); - break; - - case '\0': - fmt --; - break; - - default: - /* output this char as it is */ - OUTPUT(arg, fmt, 1); - } /* switch (*fmt) */ - - fmt ++; - } /* for(;;) */ - - /* special termination call */ - OUTPUT(arg, "\0", 1); -} - - -/* --------------- local help functions --------------------- */ -static int -PrintChar(char * buf, char c, int length, int ladjust) -{ - int i; - - if (length < 1) length = 1; - if (ladjust) { - *buf = c; - for (i=1; i< length; i++) buf[i] = ' '; - } else { - for (i=0; i< length-1; i++) buf[i] = ' '; - buf[length - 1] = c; - } - return length; -} - -static int -PrintString(char * buf, char* s, int length, int ladjust) -{ - int i; - int len=0; - char* s1 = s; - while (*s1++) len++; - if (length < len) length = len; - - if (ladjust) { - for (i=0; i< len; i++) buf[i] = s[i]; - for (i=len; i< length; i++) buf[i] = ' '; - } else { - for (i=0; i< length-len; i++) buf[i] = ' '; - for (i=length-len; i < length; i++) buf[i] = s[i-length+len]; - } - return length; -} - -static int -PrintNum(char * buf, unsigned long u, int base, int negFlag, - int length, int ladjust, char padc, int upcase) -{ - /* algorithm : - * 1. prints the number from left to right in reverse form. - * 2. fill the remaining spaces with padc if length is longer than - * the actual length - * TRICKY : if left adjusted, no "0" padding. - * if negtive, insert "0" padding between "0" and number. - * 3. if (!ladjust) we reverse the whole string including paddings - * 4. otherwise we only reverse the actual string representing the num. - */ - - int actualLength =0; - char *p = buf; - int i; - - do { - int tmp = u %base; - if (tmp <= 9) { - *p++ = '0' + tmp; - } else if (upcase) { - *p++ = 'A' + tmp - 10; - } else { - *p++ = 'a' + tmp - 10; - } - u /= base; - } while (u != 0); - - if (negFlag) { - *p++ = '-'; - } - - /* figure out actual length and adjust the maximum length */ - actualLength = p - buf; - if (length < actualLength) length = actualLength; - - /* add padding */ - if (ladjust) { - padc = ' '; - } - if (negFlag && !ladjust && (padc == '0')) { - for (i = actualLength-1; i< length-1; i++) buf[i] = padc; - buf[length -1] = '-'; - } else { - for (i = actualLength; i< length; i++) buf[i] = padc; - } - - - /* prepare to reverse the string */ - { - int begin = 0; - int end; - if (ladjust) { - end = actualLength - 1; - } else { - end = length -1; - } - - while (end > begin) { - char tmp = buf[begin]; - buf[begin] = buf[end]; - buf[end] = tmp; - begin ++; - end --; - } - } - - /* adjust the string pointer */ - return length; -} - -static void printf_output(void *arg, char *s, int l) -{ - int i; - - // special termination call - if ((l==1) && (s[0] == '\0')) return; - - for (i=0; i< l; i++) { - board_putc(s[i]); - if (s[i] == '\n') board_putc('\r'); - } -} - -void printf(char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - lp_Print(printf_output, 0, fmt, ap); - va_end(ap); -} diff --git a/target/linux/ar71xx/image/lzma-loader/src/printf.h b/target/linux/ar71xx/image/lzma-loader/src/printf.h deleted file mode 100644 index 9b1c1df232..0000000000 --- a/target/linux/ar71xx/image/lzma-loader/src/printf.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef _printf_h_ -#define _printf_h_ - -#include <stdarg.h> -void printf(char *fmt, ...); - -#endif /* _printf_h_ */ diff --git a/target/linux/ar71xx/image/mikrotik.mk b/target/linux/ar71xx/image/mikrotik.mk deleted file mode 100644 index 871f4c5352..0000000000 --- a/target/linux/ar71xx/image/mikrotik.mk +++ /dev/null @@ -1,61 +0,0 @@ -define Device/mikrotik - PROFILES := Default - DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport - BOARD_NAME := routerboard - LOADER_TYPE := elf - KERNEL_NAME := vmlinux.bin.lzma - KERNEL := kernel-bin | loader-kernel - KERNEL_INITRAMFS_NAME := vmlinux-initramfs.bin.lzma - MIKROTIK_CHUNKSIZE := - IMAGE/sysupgrade.bin/squashfs := -endef -DEVICE_VARS += MIKROTIK_CHUNKSIZE - -define Device/mikrotik-nand - $(Device/mikrotik) - IMAGE/sysupgrade.bin/squashfs = append-kernel | \ - kernel2minor -s $$(MIKROTIK_CHUNKSIZE) -e -c | sysupgrade-tar kernel=$$$$@ -endef - -define Device/nand-64m - $(Device/mikrotik-nand) - MIKROTIK_CHUNKSIZE := 512 - DEVICE_TITLE := MikroTik RouterBoard (64 MB NAND) -endef -TARGET_DEVICES += nand-64m - -define Device/nand-large - $(Device/mikrotik-nand) - MIKROTIK_CHUNKSIZE := 2048 - DEVICE_TITLE := MikroTik RouterBoard (>= 128 MB NAND) -endef -TARGET_DEVICES += nand-large - -define Device/nand-large-ac - $(Device/mikrotik-nand) - MIKROTIK_CHUNKSIZE := 2048 - DEVICE_TITLE := MikroTik RouterBoard (>= 128 MB NAND, 802.11ac) - DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct - SUPPORTED_DEVICES := rb-921gs-5hpacd-r2 rb-922uags-5hpacd -endef -TARGET_DEVICES += nand-large-ac - -define Device/rb-nor-flash-16M - $(Device/mikrotik) - DEVICE_TITLE := MikroTik RouterBoard (16 MB SPI NOR) - DEVICE_PACKAGES := rssileds -nand-utils kmod-ledtrig-gpio - IMAGE_SIZE := 16000k - KERNEL_INSTALL := 1 - SUPPORTED_DEVICES := rb-750-r2 rb-750up-r2 rb-750p-pbr2 rb-911-2hn rb-911-5hn rb-931-2nd rb-941-2nd rb-951ui-2nd rb-952ui-5ac2nd rb-962uigs-5hact2hnt rb-lhg-5nd rb-map-2nd rb-mapl-2nd rb-wap-2nd rb-wapr-2nd rb-sxt-2nd-r3 - IMAGE/sysupgrade.bin := append-kernel | kernel2minor -s 1024 -e | pad-to $$$$(BLOCKSIZE) | \ - append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += rb-nor-flash-16M - -define Device/rb-nor-flash-16M-ac - $(Device/rb-nor-flash-16M) - DEVICE_TITLE := MikroTik RouterBoard (16 MB SPI NOR, 802.11ac) - DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct ath10k-firmware-qca9887-ct kmod-usb-ehci - SUPPORTED_DEVICES += rb-wapg-5hact2hnd -endef -TARGET_DEVICES += rb-nor-flash-16M-ac diff --git a/target/linux/ar71xx/image/nand.mk b/target/linux/ar71xx/image/nand.mk deleted file mode 100644 index 8cf2e98234..0000000000 --- a/target/linux/ar71xx/image/nand.mk +++ /dev/null @@ -1,137 +0,0 @@ -define Build/MerakiNAND - -$(STAGING_DIR_HOST)/bin/mkmerakifw \ - -B $(BOARDNAME) -s \ - -i $@ \ - -o $@.new - @mv $@.new $@ -endef - -define Build/MerakiNAND-old - -$(STAGING_DIR_HOST)/bin/mkmerakifw-old \ - -B $(BOARDNAME) -s \ - -i $@ \ - -o $@.new - @mv $@.new $@ -endef - - -define Device/c-60 - DEVICE_TITLE := AirTight C-60 - DEVICE_PACKAGES := kmod-spi-gpio kmod-usb2 kmod-ath9k - BOARDNAME := C-60 - BLOCKSIZE := 64k - KERNEL_SIZE := 3648k - IMAGE_SIZE := 32m - IMAGES := sysupgrade.tar - MTDPARTS := spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,3648k(kernel),64k(art)ro;ar934x-nfc:32m(ubi) - KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma - IMAGE/sysupgrade.tar := sysupgrade-tar -endef -TARGET_DEVICES += c-60 - -define Device/domywifi-dw33d - DEVICE_TITLE := DomyWifi DW33D - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct - BOARDNAME := DW33D - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware);ar934x-nfc:96m(rootfs_data),32m(backup)ro - IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to 14528k | append-kernel | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += domywifi-dw33d - -define Device/hiveap-121 - DEVICE_TITLE := Aerohive HiveAP-121 - DEVICE_PACKAGES := kmod-usb2 kmod-i2c-gpio-custom kmod-spi-gpio kmod-ath9k kmod-tpm-i2c-atmel - BOARDNAME := HiveAP-121 - BLOCKSIZE := 128k - PAGESIZE := 2048 - IMAGE_SIZE := 115m - KERNEL_SIZE := 5120k - UBINIZE_OPTS := -E 5 - CONSOLE := ttyS0,9600 - MTDPARTS := spi0.0:512k(u-boot)ro,64k(u-boot-env),64k(hw-info)ro,64k(boot-info)ro,64k(boot-sinfo)ro;ar934x-nfc:4096k(u-boot-1),4096k(u-boot-env-1),5m(kernel),111m(ubi),4096k(wifi-info)ro - IMAGES := sysupgrade.tar factory.bin - KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma - IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE) - IMAGE/sysupgrade.tar := sysupgrade-tar -endef -TARGET_DEVICES += hiveap-121 - -define Device/mr18 - DEVICE_TITLE := Meraki MR18 - DEVICE_PACKAGES := kmod-spi-gpio kmod-ath9k - BOARDNAME := MR18 - BLOCKSIZE := 64k - MTDPARTS := ar934x-nfc:512k(nandloader)ro,8M(kernel),8M(recovery),113664k(ubi),128k@130944k(odm-caldata)ro - IMAGES := sysupgrade.tar - KERNEL := kernel-bin | patch-cmdline | MerakiNAND - KERNEL_INITRAMFS := kernel-bin | patch-cmdline | MerakiNAND - IMAGE/sysupgrade.tar := sysupgrade-tar -endef -TARGET_DEVICES += mr18 - -define Device/rambutan - DEVICE_TITLE := 8devices Rambutan - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := RAMBUTAN - BLOCKSIZE := 128KiB - MTDPARTS := ar934x-nfc:3M(u-boot)ro,2M(u-boot-env),1M(art),122M(ubi) - PAGESIZE := 2048 - KERNEL_IN_UBI := 1 - IMAGES := factory.ubi sysupgrade.tar - IMAGE/sysupgrade.tar := sysupgrade-tar - IMAGE/factory.ubi := append-ubi -endef -TARGET_DEVICES += rambutan - -define Device/wi2a-ac200i - SUPPORTED_DEVICES = $(1) - DEVICE_TITLE := Nokia WI2A-AC200i - DEVICE_PACKAGES := kmod-usb2 kmod-ath9k kmod-ath10k-ct ath10k-firmware-qca988x-ct - BOARDNAME := WI2A-AC200i - BLOCKSIZE := 64k - KERNEL_SIZE := 3648k - IMAGE_SIZE := 32m - IMAGES := sysupgrade.tar - MTDPARTS := spi0.0:256k(u-boot)ro,64k(envFacA)ro,64k(envFacB)ro,64k(ART)ro,128k(u-boot-env) - KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma - IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata -endef -TARGET_DEVICES += wi2a-ac200i - -define Device/z1 - DEVICE_TITLE := Meraki Z1 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-spi-gpio kmod-ath9k kmod-owl-loader - BOARDNAME := Z1 - BLOCKSIZE := 64k - MTDPARTS := ar934x-nfc:128K(loader1)ro,8064K(kernel),128K(loader2)ro,8064K(recovery),114560K(ubi),128K(origcaldata)ro - IMAGES := sysupgrade.tar - KERNEL := kernel-bin | patch-cmdline | MerakiNAND-old - KERNEL_INITRAMFS := kernel-bin | patch-cmdline | MerakiNAND-old - IMAGE/sysupgrade.tar := sysupgrade-tar -endef -TARGET_DEVICES += z1 - -define LegacyDevice/R6100 - DEVICE_TITLE := NETGEAR R6100 - DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct kmod-usb2 kmod-usb-ledtrig-usbport -endef -LEGACY_DEVICES += R6100 - -define LegacyDevice/WNDR3700V4 - DEVICE_TITLE := NETGEAR WNDR3700v4 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport -endef -LEGACY_DEVICES += WNDR3700V4 - -define LegacyDevice/WNDR4300V1 - DEVICE_TITLE := NETGEAR WNDR4300v1 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport -endef -LEGACY_DEVICES += WNDR4300V1 - -define LegacyDevice/NBG6716 - DEVICE_TITLE := Zyxel NBG 6716 - DEVICE_PACKAGES := kmod-rtc-pcf8563 kmod-ath10k-ct ath10k-firmware-qca988x-ct -endef -LEGACY_DEVICES += NBG6716 diff --git a/target/linux/ar71xx/image/tiny-legacy-devices.mk b/target/linux/ar71xx/image/tiny-legacy-devices.mk deleted file mode 100644 index 7f63d19de0..0000000000 --- a/target/linux/ar71xx/image/tiny-legacy-devices.mk +++ /dev/null @@ -1,161 +0,0 @@ -define LegacyDevice/F9K1115V2 - DEVICE_TITLE := Belkin AC1750DB (F9K1115V2) - DEVICE_PACKAGES := kmod-usb2 kmod-usb3 kmod-usb-ledtrig-usbport \ - kmod-ath10k-ct ath10k-firmware-qca988x-ct -endef -LEGACY_DEVICES += F9K1115V2 - -define LegacyDevice/DIR600A1 - DEVICE_TITLE := D-Link DIR-600 rev. A1 -endef -LEGACY_DEVICES += DIR600A1 - -define LegacyDevice/DIR601A1 - DEVICE_TITLE := D-Link DIR-601 rev. A1 -endef -LEGACY_DEVICES += DIR601A1 - -define LegacyDevice/FR54RTR - DEVICE_TITLE := Frys FR-54RTR -endef -LEGACY_DEVICES += FR54RTR - -define LegacyDevice/EBR2310C1 - DEVICE_TITLE := D-Link EBR-2310 rev. C1 -endef -LEGACY_DEVICES += EBR2310C1 - -define LegacyDevice/DIR615E1 - DEVICE_TITLE := D-Link DIR-615 rev. E1 -endef -LEGACY_DEVICES += DIR615E1 - -define LegacyDevice/DIR615E4 - DEVICE_TITLE := D-Link DIR-615 rev. E4 -endef -LEGACY_DEVICES += DIR615E4 - -define LegacyDevice/DIR615I1 - DEVICE_TITLE := D-Link DIR-615 rev. I1 -endef -LEGACY_DEVICES += DIR615I1 - -define LegacyDevice/DIR615I3 - DEVICE_TITLE := D-Link DIR-615 rev. I3 -endef -LEGACY_DEVICES += DIR615I3 - -define LegacyDevice/A02RBW300N - DEVICE_TITLE := Atlantis-Land A02-RB-W300N -endef -LEGACY_DEVICES += A02RBW300N - -define LegacyDevice/DIR615C1 - DEVICE_TITLE := D-Link DIR-615 rev. C1 -endef -LEGACY_DEVICES += DIR615C1 - -define LegacyDevice/TEW632BRP - DEVICE_TITLE := TRENDNet TEW-632BRP -endef -LEGACY_DEVICES += TEW632BRP - -define LegacyDevice/TEW652BRP_FW - DEVICE_TITLE := TRENDNet TEW-652BRP -endef -LEGACY_DEVICES += TEW652BRP_FW - -define LegacyDevice/TEW652BRP_RECOVERY - DEVICE_TITLE := TRENDNet TEW-652BRP (recovery) -endef -LEGACY_DEVICES += TEW652BRP_RECOVERY - -define LegacyDevice/TEW712BR - DEVICE_TITLE := TRENDNet TEW-712BR -endef -LEGACY_DEVICES += TEW712BR - -define LegacyDevice/DIR601B1 - DEVICE_TITLE := D-Link DIR-601 rev. B1 -endef -LEGACY_DEVICES += DIR601B1 - -define LegacyDevice/WP543_4M - DEVICE_TITLE := Compex WP543/WPJ543 (4MB flash) - DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 -endef -LEGACY_DEVICES += WP543_4M - -define LegacyDevice/WPE72_4M - DEVICE_TITLE := Compex WPE72/WPE72NX (4MB flash) - DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 -endef -LEGACY_DEVICES += WPE72_4M - -define LegacyDevice/WNR2000 - DEVICE_TITLE := NETGEAR WNR2000V1 -endef -LEGACY_DEVICES += WNR2000 - -define LegacyDevice/WNR2000V3 - DEVICE_TITLE := NETGEAR WNR2000V3 -endef -LEGACY_DEVICES += WNR2000V3 - -define LegacyDevice/WNR2000V4 - DEVICE_TITLE := NETGEAR WNR2000V4 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport -endef -LEGACY_DEVICES += WNR2000V4 - -define LegacyDevice/REALWNR612V2 - DEVICE_TITLE := NETGEAR WNR612V2 -endef -LEGACY_DEVICES += REALWNR612V2 - -define LegacyDevice/N150R - DEVICE_TITLE := On Networks N150 -endef -LEGACY_DEVICES += N150R - -define LegacyDevice/REALWNR1000V2 - DEVICE_TITLE := NETGEAR WNR1000V2 -endef -LEGACY_DEVICES += REALWNR1000V2 - -define LegacyDevice/WNR1000V2_VC - DEVICE_TITLE := NETGEAR WNR1000V2-VC -endef -LEGACY_DEVICES += WNR1000V2_VC - -define LegacyDevice/WPN824N - DEVICE_TITLE := NETGEAR WPN824N -endef -LEGACY_DEVICES += WPN824N - -define LegacyDevice/WHRG301N - DEVICE_TITLE := Buffalo WHR-G301N -endef -LEGACY_DEVICES += WHRG301N - -define LegacyDevice/WHRHPG300N - DEVICE_TITLE := Buffalo WHR-HP-G300N -endef -LEGACY_DEVICES += WHRHPG300N - -define LegacyDevice/WHRHPGN - DEVICE_TITLE := Buffalo WHR-HP-GN -endef -LEGACY_DEVICES += WHRHPGN - -define LegacyDevice/WLAEAG300N - DEVICE_TITLE := Buffalo WLAE-AG300N - DEVICE_PACKAGES := kmod-ledtrig-netdev -endef -LEGACY_DEVICES += WLAEAG300N - -define LegacyDevice/NBG_460N_550N_550NH - DEVICE_TITLE := ZyXEL NBG 460N/550N/550NH - DEVICE_PACKAGES := kmod-rtc-pcf8563 -endef -LEGACY_DEVICES += NBG_460N_550N_550NH diff --git a/target/linux/ar71xx/image/tiny-senao.mk b/target/linux/ar71xx/image/tiny-senao.mk deleted file mode 100644 index 3a7f6776b3..0000000000 --- a/target/linux/ar71xx/image/tiny-senao.mk +++ /dev/null @@ -1,28 +0,0 @@ -define Build/senao-factory-image - mkdir -p $@.senao - - touch $@.senao/FWINFO-OpenWrt-$(REVISION)-$(1) - $(CP) $(IMAGE_KERNEL) $@.senao/openwrt-senao-$(1)-uImage-lzma.bin - $(CP) $@ $@.senao/openwrt-senao-$(1)-root.squashfs - - $(TAR) -c \ - --numeric-owner --owner=0 --group=0 --sort=name \ - $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \ - -C $@.senao . | gzip -9nc > $@ - - rm -rf $@.senao -endef - - -define Device/ens202ext - DEVICE_TITLE := EnGenius ENS202EXT - BOARDNAME := ENS202EXT - DEVICE_PACKAGES := rssileds - KERNEL_SIZE := 1536k - IMAGE_SIZE := 13632k - IMAGES += factory.bin - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe)ro,64k(art)ro,13632k@0xa0000(firmware) - IMAGE/factory.bin := append-rootfs | pad-rootfs | senao-factory-image ens202ext - IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) -endef -TARGET_DEVICES += ens202ext diff --git a/target/linux/ar71xx/image/tiny-tp-link.mk b/target/linux/ar71xx/image/tiny-tp-link.mk deleted file mode 100644 index 5874808d21..0000000000 --- a/target/linux/ar71xx/image/tiny-tp-link.mk +++ /dev/null @@ -1,695 +0,0 @@ -include ./common-tp-link.mk - - -define Device/tl-mr10u-v1 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-MR10U v1 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := TL-MR10U - DEVICE_PROFILE := TLMR10U - TPLINK_HWID := 0x00100101 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += tl-mr10u-v1 - -define Device/tl-mr11u-v1 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-MR11U v1 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := TL-MR11U - DEVICE_PROFILE := TLMR11U - TPLINK_HWID := 0x00110101 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += tl-mr11u-v1 - -define Device/tl-mr11u-v2 - $(Device/tl-mr11u-v1) - DEVICE_TITLE := TP-LINK TL-MR11U v2 - TPLINK_HWID := 0x00110102 -endef -TARGET_DEVICES += tl-mr11u-v2 - -define Device/tl-mr12u-v1 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-MR12U v1 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := TL-MR13U - DEVICE_PROFILE := TLMR12U - TPLINK_HWID := 0x00120101 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += tl-mr12u-v1 - -define Device/tl-mr13u-v1 - $(Device/tl-mr12u-v1) - DEVICE_TITLE := TP-LINK TL-MR13U v1 - DEVICE_PROFILE := TLMR13U - TPLINK_HWID := 0x00130101 -endef -TARGET_DEVICES += tl-mr13u-v1 - -define Device/tl-mr3020-v1 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-MR3020 v1 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := TL-MR3020 - DEVICE_PROFILE := TLMR3020 - TPLINK_HWID := 0x30200001 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += tl-mr3020-v1 - -define Device/tl-mr3040-v1 - $(Device/tl-mr3020-v1) - DEVICE_TITLE := TP-LINK TL-MR3040 v1 - BOARDNAME := TL-MR3040 - DEVICE_PROFILE := TLMR3040 - TPLINK_HWID := 0x30400001 -endef -TARGET_DEVICES += tl-mr3040-v1 - -define Device/tl-mr3040-v2 - $(Device/tl-mr3040-v1) - DEVICE_TITLE := TP-LINK TL-MR3040 v2 - BOARDNAME := TL-MR3040-v2 - TPLINK_HWID := 0x30400002 -endef -TARGET_DEVICES += tl-mr3040-v2 - -define Device/tl-mr3220-v1 - $(Device/tplink-4m) - DEVICE_TITLE := TP-LINK TL-MR3220 v1 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := TL-MR3220 - DEVICE_PROFILE := TLMR3220 - TPLINK_HWID := 0x32200001 -endef -TARGET_DEVICES += tl-mr3220-v1 - -define Device/tl-mr3220-v2 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-MR3220 v2 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := TL-MR3220-v2 - DEVICE_PROFILE := TLMR3220 - TPLINK_HWID := 0x32200002 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += tl-mr3220-v2 - -define Device/tl-mr3420-v1 - $(Device/tplink-4m) - DEVICE_TITLE := TP-LINK TL-MR3420 v1 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := TL-MR3420 - DEVICE_PROFILE := TLMR3420 - TPLINK_HWID := 0x34200001 -endef -TARGET_DEVICES += tl-mr3420-v1 - -define Device/tl-mr3420-v2 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-MR3420 v2 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := TL-MR3420-v2 - DEVICE_PROFILE := TLMR3420 - TPLINK_HWID := 0x34200002 -endef -TARGET_DEVICES += tl-mr3420-v2 - -define Device/tl-wa701nd-v1 - $(Device/tplink-4m) - DEVICE_TITLE := TP-LINK TL-WA701N/ND v1 - BOARDNAME := TL-WA901ND - DEVICE_PROFILE := TLWA701 - TPLINK_HWID := 0x07010001 -endef -TARGET_DEVICES += tl-wa701nd-v1 - -define Device/tl-wa701nd-v2 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WA701N/ND v2 - BOARDNAME := TL-WA701ND-v2 - DEVICE_PROFILE := TLWA701 - TPLINK_HWID := 0x07010002 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += tl-wa701nd-v2 - -define Device/tl-wa7210n-v2 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WA7210N v2 - DEVICE_PACKAGES := rssileds kmod-ledtrig-netdev - BOARDNAME := TL-WA7210N-v2 - DEVICE_PROFILE := TLWA7210 - TPLINK_HWID := 0x72100002 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += tl-wa7210n-v2 - -define Device/tl-wa730re-v1 - $(Device/tplink-4m) - DEVICE_TITLE := TP-LINK TL-WA730RE v1 - BOARDNAME := TL-WA901ND - DEVICE_PROFILE := TLWA730RE - TPLINK_HWID := 0x07300001 -endef -TARGET_DEVICES += tl-wa730re-v1 - -define Device/tl-wa750re-v1 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WA750RE v1 - DEVICE_PACKAGES := rssileds - BOARDNAME := TL-WA750RE - DEVICE_PROFILE := TLWA750 - TPLINK_HWID := 0x07500001 -endef -TARGET_DEVICES += tl-wa750re-v1 - -define Device/tl-wa7510n-v1 - $(Device/tplink-4m) - DEVICE_TITLE := TP-LINK TL-WA7510N v1 - BOARDNAME := TL-WA7510N - DEVICE_PROFILE := TLWA7510 - TPLINK_HWID := 0x75100001 -endef -TARGET_DEVICES += tl-wa7510n-v1 - -define Device/tl-wa801nd-v1 - $(Device/tplink-4m) - DEVICE_TITLE := TP-LINK TL-WA801N/ND v1 - BOARDNAME := TL-WA901ND - DEVICE_PROFILE := TLWA801 - TPLINK_HWID := 0x08010001 -endef -TARGET_DEVICES += tl-wa801nd-v1 - -define Device/tl-wa801nd-v2 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WA801N/ND v2 - BOARDNAME := TL-WA801ND-v2 - DEVICE_PROFILE := TLWA801 - TPLINK_HWID := 0x08010002 -endef -TARGET_DEVICES += tl-wa801nd-v2 - -define Device/tl-wa801nd-v3 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WA801N/ND v3 - BOARDNAME := TL-WA801ND-v3 - DEVICE_PROFILE := TLWA801 - TPLINK_HWID := 0x08010003 -endef -TARGET_DEVICES += tl-wa801nd-v3 - -define Device/tl-wa801nd-v4 - $(Device/tl-wa801nd-v3) - DEVICE_TITLE := TP-LINK TL-WA801N/ND v4 - TPLINK_HWID := 0x08010004 -endef -TARGET_DEVICES += tl-wa801nd-v4 - -define Device/tl-wa830re-v1 - $(Device/tplink-4m) - DEVICE_TITLE := TP-LINK TL-WA830RE v1 - BOARDNAME := TL-WA901ND - DEVICE_PROFILE := TLWA830 - TPLINK_HWID := 0x08300010 -endef -TARGET_DEVICES += tl-wa830re-v1 - -define Device/tl-wa830re-v2 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WA830RE v2 - BOARDNAME := TL-WA830RE-v2 - DEVICE_PROFILE := TLWA830 - TPLINK_HWID := 0x08300002 -endef -TARGET_DEVICES += tl-wa830re-v2 - -define Device/tl-wa850re-v1 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WA850RE v1 - DEVICE_PACKAGES := rssileds - BOARDNAME := TL-WA850RE - DEVICE_PROFILE := TLWA850 - TPLINK_HWID := 0x08500001 -endef -TARGET_DEVICES += tl-wa850re-v1 - -define Device/tl-wa850re-v2 - $(Device/tplink-safeloader) - DEVICE_TITLE := TP-LINK TL-WA850RE v2 - DEVICE_PACKAGES := rssileds - BOARDNAME := TL-WA850RE-V2 - DEVICE_PROFILE := TLWA850 - TPLINK_BOARD_ID := TLWA850REV2 - TPLINK_HWID := 0x08500002 - TPLINK_HWREV := 0 - IMAGE_SIZE := 3648k - MTDPARTS := spi0.0:128k(u-boot)ro,3648k(firmware),256k(config)ro,64k(art)ro -endef -TARGET_DEVICES += tl-wa850re-v2 - -define Device/tl-wa855re-v1 - $(Device/tplink-safeloader) - DEVICE_TITLE := TP-LINK TL-WA855RE v1 - BOARDNAME := TL-WA855RE-v1 - DEVICE_PROFILE := TLWA855RE - TPLINK_HWID := 0x08550001 - TPLINK_BOARD_ID := TLWA855REV1 - TPLINK_HWREV := 0 - IMAGE_SIZE := 3648k - MTDPARTS := spi0.0:128k(u-boot)ro,1344k(kernel),2304k(rootfs),256k(config)ro,64k(art)ro,3648k@0x20000(firmware) -endef -TARGET_DEVICES += tl-wa855re-v1 - -define Device/tl-wa860re-v1 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WA860RE v1 - BOARDNAME := TL-WA860RE - DEVICE_PROFILE := TLWA860 - TPLINK_HWID := 0x08600001 -endef -TARGET_DEVICES += tl-wa860re-v1 - -define Device/tl-wa901nd-v1 - $(Device/tplink-4m) - DEVICE_TITLE := TP-LINK TL-WA901N/ND v1 - BOARDNAME := TL-WA901ND - DEVICE_PROFILE := TLWA901 - TPLINK_HWID := 0x09010001 -endef -TARGET_DEVICES += tl-wa901nd-v1 - -define Device/tl-wa901nd-v2 - $(Device/tplink-4m) - DEVICE_TITLE := TP-LINK TL-WA901N/ND v2 - BOARDNAME := TL-WA901ND-v2 - DEVICE_PROFILE := TLWA901 - TPLINK_HWID := 0x09010002 -endef -TARGET_DEVICES += tl-wa901nd-v2 - -define Device/tl-wa901nd-v3 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WA901N/ND v3 - BOARDNAME := TL-WA901ND-v3 - DEVICE_PROFILE := TLWA901 - TPLINK_HWID := 0x09010003 -endef -TARGET_DEVICES += tl-wa901nd-v3 - -define Device/tl-wa901nd-v4 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WA901N/ND v4 - BOARDNAME := TL-WA901ND-v4 - DEVICE_PROFILE := TLWA901 - TPLINK_HWID := 0x09010004 - IMAGE/factory.bin := append-rootfs | mktplinkfw factory -C EU -endef -TARGET_DEVICES += tl-wa901nd-v4 - -define Device/tl-wa901nd-v5 - $(Device/tl-wa901nd-v4) - DEVICE_TITLE := TP-LINK TL-WA901N/ND v5 - BOARDNAME := TL-WA901ND-v5 - TPLINK_HWID := 0x09010005 -endef -TARGET_DEVICES += tl-wa901nd-v5 - -define Device/tl-wdr3320-v2 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WDR3320 v2 - DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport - BOARDNAME := TL-WDR3320-v2 - DEVICE_PROFILE := TLWDR3320V2 - TPLINK_HWID := 0x33200002 - TPLINK_HEADER_VERSION := 2 -endef -TARGET_DEVICES += tl-wdr3320-v2 - -define Device/tl-wr1041n-v2 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WR1041N v2 - BOARDNAME := TL-WR1041N-v2 - DEVICE_PROFILE := TLWR1041 - TPLINK_HWID := 0x10410002 -endef -TARGET_DEVICES += tl-wr1041n-v2 - -define Device/tl-wr703n-v1 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WR703N v1 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := TL-WR703N - DEVICE_PROFILE := TLWR703 - TPLINK_HWID := 0x07030101 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += tl-wr703n-v1 - -define Device/tl-wr710n-v2 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WR710N v2 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := TL-WR710N - DEVICE_PROFILE := TLWR710 - TPLINK_HWID := 0x07100002 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += tl-wr710n-v2 - -define Device/tl-wr720n-v3 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WR720N v3 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := TL-WR720N-v3 - DEVICE_PROFILE := TLWR720 - TPLINK_HWID := 0x07200103 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += tl-wr720n-v3 - -define Device/tl-wr720n-v4 - $(Device/tl-wr720n-v3) - DEVICE_TITLE := TP-LINK TL-WR720N v4 - TPLINK_HWID := 0x07200104 -endef -TARGET_DEVICES += tl-wr720n-v4 - -define Device/tl-wr740n-v1 - $(Device/tplink-4m) - DEVICE_TITLE := TP-LINK TL-WR740N/ND v1 - BOARDNAME := TL-WR741ND - DEVICE_PROFILE := TLWR740 - TPLINK_HWID := 0x07400001 -endef -TARGET_DEVICES += tl-wr740n-v1 - -define Device/tl-wr740n-v3 - $(Device/tl-wr740n-v1) - DEVICE_TITLE := TP-LINK TL-WR740N/ND v3 - TPLINK_HWID := 0x07400003 -endef -TARGET_DEVICES += tl-wr740n-v3 - -define Device/tl-wr740n-v4 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WR740N/ND v4 - BOARDNAME := TL-WR741ND-v4 - DEVICE_PROFILE := TLWR740 - TPLINK_HWID := 0x07400004 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += tl-wr740n-v4 - -define Device/tl-wr740n-v5 - $(Device/tl-wr740n-v4) - DEVICE_TITLE := TP-LINK TL-WR740N/ND v5 - TPLINK_HWID := 0x07400005 -endef -TARGET_DEVICES += tl-wr740n-v5 - -define Device/tl-wr740n-v6 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WR740N/ND v6 - BOARDNAME := TL-WR740N-v6 - DEVICE_PROFILE := TLWR740 - TPLINK_HWID := 0x07400006 -endef -TARGET_DEVICES += tl-wr740n-v6 - -define Device/tl-wr741nd-v1 - $(Device/tplink-4m) - DEVICE_TITLE := TP-LINK TL-WR741N/ND v1 - BOARDNAME := TL-WR741ND - DEVICE_PROFILE := TLWR741 - TPLINK_HWID := 0x07410001 -endef -TARGET_DEVICES += tl-wr741nd-v1 - -define Device/tl-wr741nd-v2 - $(Device/tl-wr741nd-v1) - DEVICE_TITLE := TP-LINK TL-WR741N/ND v2 -endef -TARGET_DEVICES += tl-wr741nd-v2 - -define Device/tl-wr741nd-v4 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WR741N/ND v4 - BOARDNAME := TL-WR741ND-v4 - DEVICE_PROFILE := TLWR741 - TPLINK_HWID := 0x07410004 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += tl-wr741nd-v4 - -define Device/tl-wr741nd-v5 - $(Device/tl-wr741nd-v4) - DEVICE_TITLE := TP-LINK TL-WR741N/ND v5 - TPLINK_HWID := 0x07400005 -endef -TARGET_DEVICES += tl-wr741nd-v5 - -define Device/tl-wr743nd-v1 - $(Device/tplink-4m) - DEVICE_TITLE := TP-LINK TL-WR743N/ND v1 - BOARDNAME := TL-WR741ND - DEVICE_PROFILE := TLWR743 - TPLINK_HWID := 0x07430001 -endef -TARGET_DEVICES += tl-wr743nd-v1 - -define Device/tl-wr743nd-v2 - $(Device/tl-wr741nd-v4) - DEVICE_TITLE := TP-LINK TL-WR743N/ND v2 - DEVICE_PROFILE := TLWR743 - TPLINK_HWID := 0x07430002 -endef -TARGET_DEVICES += tl-wr743nd-v2 - -define Device/tl-wr802n-v1 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WR802N v1 - BOARDNAME := TL-WR802N-v1 - DEVICE_PROFILE := TLWR802 - TPLINK_HWID := 0x08020001 - TPLINK_HWREV := 1 -endef -TARGET_DEVICES += tl-wr802n-v1 - -define Device/tl-wr802n-v2 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WR802N v2 - BOARDNAME := TL-WR802N-v2 - DEVICE_PROFILE := TLWR802 - TPLINK_HWID := 0x08020002 - TPLINK_HWREV := 2 - IMAGES += factory-us.bin factory-eu.bin - IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US - IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU -endef -TARGET_DEVICES += tl-wr802n-v2 - -define Device/tl-wr840n-v2 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WR840N v2 - BOARDNAME := TL-WR840N-v2 - DEVICE_PROFILE := TLWR840 - TPLINK_HWID := 0x08400002 - IMAGES += factory-eu.bin - IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU -endef -TARGET_DEVICES += tl-wr840n-v2 - -define Device/tl-wr840n-v3 - $(Device/tl-wr840n-v2) - DEVICE_TITLE := TP-LINK TL-WR840N v3 - BOARDNAME := TL-WR840N-v3 - TPLINK_HWID := 0x08400003 -endef -TARGET_DEVICES += tl-wr840n-v3 - -define Device/tl-wr841-v1.5 - $(Device/tplink-4m) - DEVICE_TITLE := TP-LINK TL-WR841N/ND v1.5 - BOARDNAME := TL-WR841N-v1.5 - DEVICE_PROFILE := TLWR841 - TPLINK_HWID := 0x08410002 - TPLINK_HWREV := 2 -endef -TARGET_DEVICES += tl-wr841-v1.5 - -define Device/tl-wr841-v3 - $(Device/tplink-4m) - DEVICE_TITLE := TP-LINK TL-WR841N/ND v3 - BOARDNAME := TL-WR941ND - DEVICE_PROFILE := TLWR841 - TPLINK_HWID := 0x08410003 - TPLINK_HWREV := 3 -endef -TARGET_DEVICES += tl-wr841-v3 - -define Device/tl-wr841-v5 - $(Device/tplink-4m) - DEVICE_TITLE := TP-LINK TL-WR841N/ND v5 - BOARDNAME := TL-WR741ND - DEVICE_PROFILE := TLWR841 - TPLINK_HWID := 0x08410005 -endef -TARGET_DEVICES += tl-wr841-v5 - -define Device/tl-wr841-v7 - $(Device/tplink-4m) - DEVICE_TITLE := TP-LINK TL-WR841N/ND v7 - BOARDNAME := TL-WR841N-v7 - DEVICE_PROFILE := TLWR841 - TPLINK_HWID := 0x08410007 -endef -TARGET_DEVICES += tl-wr841-v7 - -define Device/tl-wr841-v8 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WR841N/ND v8 - BOARDNAME := TL-WR841N-v8 - DEVICE_PROFILE := TLWR841 - TPLINK_HWID := 0x08410008 -endef -TARGET_DEVICES += tl-wr841-v8 - -define Device/tl-wr841-v9 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WR841N/ND v9 - BOARDNAME := TL-WR841N-v9 - DEVICE_PROFILE := TLWR841 - TPLINK_HWID := 0x08410009 -endef -TARGET_DEVICES += tl-wr841-v9 - -define Device/tl-wr841-v10 - $(Device/tl-wr841-v9) - DEVICE_TITLE := TP-LINK TL-WR841N/ND v10 - TPLINK_HWID := 0x08410010 -endef -TARGET_DEVICES += tl-wr841-v10 - -define Device/tl-wr841-v11 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WR841N/ND v11 - BOARDNAME := TL-WR841N-v11 - DEVICE_PROFILE := TLWR841 - TPLINK_HWID := 0x08410011 - IMAGES += factory-us.bin factory-eu.bin - IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US - IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU -endef -TARGET_DEVICES += tl-wr841-v11 - -define Device/tl-wr841-v12 - $(Device/tl-wr841-v11) - DEVICE_TITLE := TP-LINK TL-WR841N/ND v12 - TPLINK_HWID := 0x08410012 -endef -TARGET_DEVICES += tl-wr841-v12 - -define Device/tl-wr843nd-v1 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WR843N/ND v1 - BOARDNAME := TL-WR841N-v8 - DEVICE_PROFILE := TLWR843 - TPLINK_HWID := 0x08430001 -endef -TARGET_DEVICES += tl-wr843nd-v1 - -define Device/tl-wr847n-v8 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WR847N/ND v8 - BOARDNAME := TL-WR841N-v8 - DEVICE_PROFILE := TLWR841 - TPLINK_HWID := 0x08470008 -endef -TARGET_DEVICES += tl-wr847n-v8 - -define Device/tl-wr940n-v4 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WR940N v4 - BOARDNAME := TL-WR940N-v4 - DEVICE_PROFILE := TLWR941 - TPLINK_HWID := 0x09400004 - IMAGES += factory-us.bin factory-eu.bin factory-br.bin - IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US - IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU - IMAGE/factory-br.bin := append-rootfs | mktplinkfw factory -C BR -endef -TARGET_DEVICES += tl-wr940n-v4 - -define Device/tl-wr940n-v6 - $(Device/tl-wr940n-v4) - DEVICE_TITLE := TP-LINK TL-WR940N v6 - BOARDNAME := TL-WR940N-v6 - TPLINK_HWID := 0x09400006 -endef -TARGET_DEVICES += tl-wr940n-v6 - -define Device/tl-wr941nd-v2 - $(Device/tplink-4m) - DEVICE_TITLE := TP-LINK TL-WR941N/ND v2 - BOARDNAME := TL-WR941ND - DEVICE_PROFILE := TLWR941 - TPLINK_HWID := 0x09410002 - TPLINK_HWREV := 2 -endef -TARGET_DEVICES += tl-wr941nd-v2 - -define Device/tl-wr941nd-v3 - $(Device/tl-wr941nd-v2) - DEVICE_TITLE := TP-LINK TL-WR941N/ND v3 -endef -TARGET_DEVICES += tl-wr941nd-v3 - -define Device/rnx-n360rt - $(Device/tl-wr941nd-v2) - DEVICE_TITLE := Rosewill RNX-N360RT - DEVICE_PROFILE := RNXN360RT - TPLINK_HWREV := 0x00420001 -endef -TARGET_DEVICES += rnx-n360rt - -define Device/tl-wr941nd-v4 - $(Device/tplink-4m) - DEVICE_TITLE := TP-LINK TL-WR941N/ND v4 - BOARDNAME := TL-WR741ND - DEVICE_PROFILE := TLWR941 - TPLINK_HWID := 0x09410004 -endef -TARGET_DEVICES += tl-wr941nd-v4 - -define Device/tl-wr941nd-v5 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WR941N/ND v5 - BOARDNAME := TL-WR941ND-v5 - DEVICE_PROFILE := TLWR941 - TPLINK_HWID := 0x09410005 -endef -TARGET_DEVICES += tl-wr941nd-v5 - -define Device/tl-wr941nd-v6 - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WR941N/ND v6 - BOARDNAME := TL-WR941ND-v6 - DEVICE_PROFILE := TLWR941 - TPLINK_HWID := 0x09410006 -endef -TARGET_DEVICES += tl-wr941nd-v6 - -# Chinese version (unlike European) is similar to the TL-WDR3500 -define Device/tl-wr941nd-v6-cn - $(Device/tplink-4mlzma) - DEVICE_TITLE := TP-LINK TL-WR941N/ND v6 (CN) - BOARDNAME := TL-WDR3500 - DEVICE_PROFILE := TLWR941 - TPLINK_HWID := 0x09410006 -endef -TARGET_DEVICES += tl-wr941nd-v6-cn diff --git a/target/linux/ar71xx/image/tiny.mk b/target/linux/ar71xx/image/tiny.mk deleted file mode 100644 index f89d9df83c..0000000000 --- a/target/linux/ar71xx/image/tiny.mk +++ /dev/null @@ -1,31 +0,0 @@ -define Build/mkbuffaloimg - $(STAGING_DIR_HOST)/bin/mkbuffaloimg -B $(BOARDNAME) \ - -R $$(($(subst k, * 1024,$(ROOTFS_SIZE)))) \ - -K $$(($(subst k, * 1024,$(KERNEL_SIZE)))) \ - -i $@ -o $@.new - mv $@.new $@ -endef - - -define Device/bhr-4grv2 - DEVICE_TITLE := Buffalo BHR-4GRV2 - BOARDNAME := BHR-4GRV2 - ROOTFS_SIZE := 14528k - KERNEL_SIZE := 1472k - IMAGE_SIZE := 16000k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) - IMAGES := sysupgrade.bin factory.bin - IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE) - IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | mkbuffaloimg -endef - -define Device/zbt-we1526 - DEVICE_TITLE := Zbtlink ZBT-WE1526 - DEVICE_PACKAGES := kmod-usb2 - BOARDNAME := ZBT-WE1526 - IMAGE_SIZE := 16000k - KERNEL_SIZE := 1472k - ROOTFS_SIZE := 14528k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) - IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE) -endef diff --git a/target/linux/ar71xx/image/ubinize-nbg6716.ini b/target/linux/ar71xx/image/ubinize-nbg6716.ini deleted file mode 100644 index 814b0fbcc8..0000000000 --- a/target/linux/ar71xx/image/ubinize-nbg6716.ini +++ /dev/null @@ -1,24 +0,0 @@ -[rootfs] -# Volume mode (other option is static) -mode=ubi -# Source image -image=ubi_root.img -# Volume ID in UBI image -vol_id=0 -# Allow for dynamic resize -vol_type=dynamic -# Volume name -vol_name=rootfs - -[rootfs_data] -# Volume mode (other option is static) -mode=ubi -# Volume ID in UBI image -vol_id=1 -# Allow for dynamic resize -vol_type=dynamic -# Volume name -vol_name=rootfs_data -# Autoresize volume at first mount -vol_size=1MiB -vol_flags=autoresize diff --git a/target/linux/ar71xx/image/ubinize-wndr4300.ini b/target/linux/ar71xx/image/ubinize-wndr4300.ini deleted file mode 100644 index 5bff906ae8..0000000000 --- a/target/linux/ar71xx/image/ubinize-wndr4300.ini +++ /dev/null @@ -1,26 +0,0 @@ -[rootfs] -# Volume mode (other option is static) -mode=ubi -# Source image -image=root.squashfs -# Volume ID in UBI image -vol_id=0 -# Allow for dynamic resize -vol_type=dynamic -# Volume name -vol_name=rootfs -# Autoresize volume at first mount -# vol_flags=autoresize - -[rootfs_data] -# Volume mode (other option is static) -mode=ubi -# Volume ID in UBI image -vol_id=1 -# Allow for dynamic resize -vol_type=dynamic -# Volume name -vol_name=rootfs_data -# Autoresize volume at first mount -vol_flags=autoresize -vol_size=1MiB diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default deleted file mode 100644 index eb2f362034..0000000000 --- a/target/linux/ar71xx/mikrotik/config-default +++ /dev/null @@ -1,79 +0,0 @@ -CONFIG_ATH79_DEV_AP9X_PCI=y -CONFIG_ATH79_DEV_ETH=y -CONFIG_ATH79_DEV_GPIO_BUTTONS=y -CONFIG_ATH79_DEV_LEDS_GPIO=y -CONFIG_ATH79_DEV_M25P80=y -CONFIG_ATH79_DEV_NFC=y -CONFIG_ATH79_DEV_SPI=y -CONFIG_ATH79_DEV_USB=y -CONFIG_ATH79_DEV_WMAC=y -CONFIG_ATH79_MACH_RB2011=y -CONFIG_ATH79_MACH_RB4XX=y -CONFIG_ATH79_MACH_RB750=y -CONFIG_ATH79_MACH_RB91X=y -CONFIG_ATH79_MACH_RB922=y -CONFIG_ATH79_MACH_RB95X=y -CONFIG_ATH79_MACH_RBSPI=y -CONFIG_ATH79_MACH_RBSXTLITE=y -CONFIG_ATH79_PCI_ATH9K_FIXUP=y -CONFIG_ATH79_ROUTERBOOT=y -CONFIG_BLK_MQ_PCI=y -CONFIG_CRC16=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_GPIO_LATCH=y -CONFIG_HW_HAS_PCI=y -# CONFIG_INTEL_XWAY_PHY is not set -CONFIG_LEDS_RB750=y -CONFIG_LZO_DECOMPRESS=y -# CONFIG_MARVELL_PHY is not set -CONFIG_MIKROTIK=y -CONFIG_MIKROTIK_RB_SYSFS=y -# CONFIG_MTD_CFI is not set -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_CYBERTAN_PARTS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MYLOADER_PARTS is not set -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_AR934X=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_RB4XX=y -CONFIG_MTD_NAND_RB750=y -CONFIG_MTD_NAND_RB91X=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -# CONFIG_MTD_SPLIT_EVA_FW is not set -# CONFIG_MTD_SPLIT_LZMA_FW is not set -# CONFIG_MTD_SPLIT_SEAMA_FW is not set -# CONFIG_MTD_SPLIT_TPLINK_FW is not set -# CONFIG_MTD_SPLIT_UIMAGE_FW is not set -# CONFIG_MTD_SPLIT_WRGG_FW is not set -# CONFIG_MTD_TPLINK_PARTS is not set -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -# CONFIG_NET_DSA is not set -CONFIG_PCI=y -CONFIG_PCI_AR724X=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_RLE_DECOMPRESS=y -# CONFIG_RTL8306_PHY is not set -# CONFIG_RTL8366_SMI is not set -CONFIG_SOC_AR71XX=y -CONFIG_SOC_AR724X=y -CONFIG_SOC_AR934X=y -CONFIG_SOC_QCA953X=y -CONFIG_SOC_QCA955X=y -CONFIG_SPI_RB4XX=y -CONFIG_SPI_RB4XX_CPLD=y -CONFIG_UBIFS_FS=y -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -# CONFIG_UBIFS_FS_LZO is not set -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/ar71xx/mikrotik/profiles/00-default.mk b/target/linux/ar71xx/mikrotik/profiles/00-default.mk deleted file mode 100644 index 1dfc62dbb3..0000000000 --- a/target/linux/ar71xx/mikrotik/profiles/00-default.mk +++ /dev/null @@ -1,18 +0,0 @@ -# -# Copyright (C) 2009 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/Default - NAME:=Default Profile - PACKAGES:= \ - kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport nand-utils - PRIORITY := 1 -endef - -define Profile/Default/Description - Default package set compatible with most boards. -endef -$(eval $(call Profile,Default)) diff --git a/target/linux/ar71xx/mikrotik/target.mk b/target/linux/ar71xx/mikrotik/target.mk deleted file mode 100644 index 5ae57fadb3..0000000000 --- a/target/linux/ar71xx/mikrotik/target.mk +++ /dev/null @@ -1,11 +0,0 @@ -BOARDNAME:=Mikrotik devices with NAND/NOR flash -FEATURES += squashfs ramdisk minor nand - -DEFAULT_PACKAGES += nand-utils wpad-basic - -define Target/Description - Build firmware images for Atheros AR71xx/AR913x based Mikrotik boards. - e.g. MikroTik RB-4xx or RB-750 -endef - - diff --git a/target/linux/ar71xx/modules.mk b/target/linux/ar71xx/modules.mk deleted file mode 100644 index 9ead8b451c..0000000000 --- a/target/linux/ar71xx/modules.mk +++ /dev/null @@ -1,69 +0,0 @@ -# -# Copyright (C) 2006-2011 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define KernelPackage/leds-nu801 - SUBMENU:=$(LEDS_MENU) - TITLE:=Meraki MR18 LED support - DEPENDS:=@TARGET_ar71xx - KCONFIG:=CONFIG_LEDS_NU801 - FILES:=$(LINUX_DIR)/drivers/leds/leds-nu801.ko - AUTOLOAD:=$(call AutoLoad,60,leds-nu801) -endef - -define KernelPackage/leds-nu801/description - Kernel module for the nu801 LED driver used on the Meraki MR18. -endef - -$(eval $(call KernelPackage,leds-nu801)) - - -define KernelPackage/leds-rb750 - SUBMENU:=$(LEDS_MENU) - TITLE:=RouterBOARD 750 LED support - DEPENDS:=@TARGET_ar71xx - KCONFIG:=CONFIG_LEDS_RB750 - FILES:=$(LINUX_DIR)/drivers/leds/leds-rb750.ko - AUTOLOAD:=$(call AutoLoad,60,leds-rb750) -endef - -define KernelPackage/leds-rb750/description - Kernel module for the LEDs on the MikroTik RouterBOARD 750. -endef - -$(eval $(call KernelPackage,leds-rb750)) - - -define KernelPackage/leds-wndr3700-usb - SUBMENU:=$(LEDS_MENU) - TITLE:=WNDR3700 USB LED support - DEPENDS:=@TARGET_ar71xx - KCONFIG:=CONFIG_LEDS_WNDR3700_USB - FILES:=$(LINUX_DIR)/drivers/leds/leds-wndr3700-usb.ko - AUTOLOAD:=$(call AutoLoad,60,leds-wndr3700-usb) -endef - -define KernelPackage/leds-wndr3700-usb/description - Kernel module for the USB LED on the NETGEAR WNDR3700 board. -endef - -$(eval $(call KernelPackage,leds-wndr3700-usb)) - - -define KernelPackage/spi-vsc7385 - SUBMENU:=$(SPI_MENU) - TITLE:=Vitesse VSC7385 ethernet switch driver - DEPENDS:=@TARGET_ar71xx - KCONFIG:=CONFIG_SPI_VSC7385 - FILES:=$(LINUX_DIR)/drivers/spi/spi-vsc7385.ko - AUTOLOAD:=$(call AutoLoad,93,spi-vsc7385) -endef - -define KernelPackage/spi-vsc7385/description - This package contains the SPI driver for the Vitesse VSC7385 ethernet switch. -endef - -$(eval $(call KernelPackage,spi-vsc7385)) diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default deleted file mode 100644 index 39b1ca4995..0000000000 --- a/target/linux/ar71xx/nand/config-default +++ /dev/null @@ -1,70 +0,0 @@ -CONFIG_ATH79_DEV_AP9X_PCI=y -CONFIG_ATH79_DEV_ETH=y -CONFIG_ATH79_DEV_GPIO_BUTTONS=y -CONFIG_ATH79_DEV_LEDS_GPIO=y -CONFIG_ATH79_DEV_M25P80=y -CONFIG_ATH79_DEV_NFC=y -CONFIG_ATH79_DEV_SPI=y -CONFIG_ATH79_DEV_USB=y -CONFIG_ATH79_DEV_WMAC=y -CONFIG_ATH79_MACH_C60=y -CONFIG_ATH79_MACH_DOMYWIFI_DW33D=y -CONFIG_ATH79_MACH_HIVEAP_121=y -CONFIG_ATH79_MACH_MR18=y -CONFIG_ATH79_MACH_NBG6716=y -CONFIG_ATH79_MACH_R6100=y -CONFIG_ATH79_MACH_RAMBUTAN=y -CONFIG_ATH79_MACH_WI2A_AC200I=y -CONFIG_ATH79_MACH_WNDR4300=y -CONFIG_ATH79_MACH_Z1=y -CONFIG_ATH79_NVRAM=y -CONFIG_ATH79_PCI_ATH9K_FIXUP=y -CONFIG_BCH=y -CONFIG_BLK_MQ_PCI=y -CONFIG_CRC16=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_LZO=y -CONFIG_HW_HAS_PCI=y -# CONFIG_INTEL_XWAY_PHY is not set -# CONFIG_IP17XX_PHY is not set -CONFIG_LEDS_NU801=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -# CONFIG_MARVELL_PHY is not set -# CONFIG_MICREL_PHY is not set -# CONFIG_MTD_CFI is not set -CONFIG_MTD_CFI_I2=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MYLOADER_PARTS is not set -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_AR934X=y -CONFIG_MTD_NAND_AR934X_HW_ECC=y -CONFIG_MTD_NAND_BCH=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_ECC_BCH=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_SPLIT_EVA_FW is not set -# CONFIG_MTD_SPLIT_SEAMA_FW is not set -# CONFIG_MTD_SPLIT_TPLINK_FW is not set -# CONFIG_MTD_TPLINK_PARTS is not set -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_PCI=y -CONFIG_PCI_AR724X=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -# CONFIG_RTL8306_PHY is not set -# CONFIG_RTL8366_SMI is not set -CONFIG_SOC_AR934X=y -CONFIG_SOC_QCA955X=y -CONFIG_UBIFS_FS=y -# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/ar71xx/nand/profiles/00-default.mk b/target/linux/ar71xx/nand/profiles/00-default.mk deleted file mode 100644 index 6e618113a5..0000000000 --- a/target/linux/ar71xx/nand/profiles/00-default.mk +++ /dev/null @@ -1,18 +0,0 @@ -# -# Copyright (C) 2009 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/Default - NAME:=Default Profile - PACKAGES:= \ - kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport - PRIORITY := 1 -endef - -define Profile/Default/Description - Default package set compatible with most boards. -endef -$(eval $(call Profile,Default)) diff --git a/target/linux/ar71xx/nand/target.mk b/target/linux/ar71xx/nand/target.mk deleted file mode 100644 index d5191b2260..0000000000 --- a/target/linux/ar71xx/nand/target.mk +++ /dev/null @@ -1,9 +0,0 @@ -BOARDNAME := Generic devices with NAND flash -FEATURES += squashfs nand rtc - -DEFAULT_PACKAGES += wpad-basic - -define Target/Description - Build firmware images for Atheros AR71xx/AR913x based boards with - NAND flash, e.g. Netgear WNDR4300. -endef diff --git a/target/linux/ar71xx/patches-4.14/001-spi-cs-gpio.patch b/target/linux/ar71xx/patches-4.14/001-spi-cs-gpio.patch deleted file mode 100644 index 7a0b669e43..0000000000 --- a/target/linux/ar71xx/patches-4.14/001-spi-cs-gpio.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h -+++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h -@@ -14,6 +14,7 @@ - struct ath79_spi_platform_data { - unsigned bus_num; - unsigned num_chipselect; -+ int *cs_gpios; - }; - - #endif /* _ATH79_SPI_PLATFORM_H */ ---- a/drivers/spi/spi-ath79.c -+++ b/drivers/spi/spi-ath79.c -@@ -231,6 +231,7 @@ static int ath79_spi_probe(struct platfo - if (pdata) { - master->bus_num = pdata->bus_num; - master->num_chipselect = pdata->num_chipselect; -+ master->cs_gpios = pdata->cs_gpios; - } - - sp->bitbang.master = master; diff --git a/target/linux/ar71xx/patches-4.14/002-add_back_gpio_function_select.patch b/target/linux/ar71xx/patches-4.14/002-add_back_gpio_function_select.patch deleted file mode 100644 index 5b26a640eb..0000000000 --- a/target/linux/ar71xx/patches-4.14/002-add_back_gpio_function_select.patch +++ /dev/null @@ -1,92 +0,0 @@ ---- /dev/null -+++ b/arch/mips/ath79/gpio.c -@@ -0,0 +1,59 @@ -+/* -+ * Atheros AR71XX/AR724X/AR913X GPIO API support -+ * -+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> -+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/io.h> -+#include <linux/gpio.h> -+#include <asm/mach-ath79/ar71xx_regs.h> -+#include <asm/mach-ath79/ath79.h> -+#include "common.h" -+ -+void __iomem *ath79_gpio_base; -+EXPORT_SYMBOL_GPL(ath79_gpio_base); -+ -+static void __iomem *ath79_gpio_get_function_reg(void) -+{ -+ u32 reg = 0; -+ -+ if (soc_is_ar71xx() || -+ soc_is_ar724x() || -+ soc_is_ar913x() || -+ soc_is_ar933x()) -+ reg = AR71XX_GPIO_REG_FUNC; -+ else if (soc_is_ar934x()) -+ reg = AR934X_GPIO_REG_FUNC; -+ else -+ BUG(); -+ -+ return ath79_gpio_base + reg; -+} -+ -+void ath79_gpio_function_setup(u32 set, u32 clear) -+{ -+ void __iomem *reg = ath79_gpio_get_function_reg(); -+ -+ __raw_writel((__raw_readl(reg) & ~clear) | set, reg); -+ /* flush write */ -+ __raw_readl(reg); -+} -+ -+void ath79_gpio_function_enable(u32 mask) -+{ -+ ath79_gpio_function_setup(mask, 0); -+} -+ -+void ath79_gpio_function_disable(u32 mask) -+{ -+ ath79_gpio_function_setup(0, mask); -+} ---- a/arch/mips/include/asm/mach-ath79/ath79.h -+++ b/arch/mips/include/asm/mach-ath79/ath79.h -@@ -118,6 +118,7 @@ static inline int soc_is_qca955x(void) - void ath79_ddr_wb_flush(unsigned int reg); - void ath79_ddr_set_pci_windows(void); - -+extern void __iomem *ath79_gpio_base; - extern void __iomem *ath79_pll_base; - extern void __iomem *ath79_reset_base; - ---- a/arch/mips/ath79/dev-common.c -+++ b/arch/mips/ath79/dev-common.c -@@ -156,4 +156,5 @@ void __init ath79_gpio_init(void) - } - - platform_device_register(&ath79_gpio_device); -+ ath79_gpio_base = ioremap(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE); - } ---- a/arch/mips/ath79/common.h -+++ b/arch/mips/ath79/common.h -@@ -24,6 +24,9 @@ unsigned long ath79_get_sys_clk_rate(con - - void ath79_ddr_ctrl_init(void); - -+void ath79_gpio_function_enable(u32 mask); -+void ath79_gpio_function_disable(u32 mask); -+void ath79_gpio_function_setup(u32 set, u32 clear); - void ath79_gpio_init(void); - - #endif /* __ATH79_COMMON_H */ diff --git a/target/linux/ar71xx/patches-4.14/004-register_gpio_driver_earlier.patch b/target/linux/ar71xx/patches-4.14/004-register_gpio_driver_earlier.patch deleted file mode 100644 index cc30e2d91e..0000000000 --- a/target/linux/ar71xx/patches-4.14/004-register_gpio_driver_earlier.patch +++ /dev/null @@ -1,18 +0,0 @@ -HACK: register the GPIO driver earlier to ensure that gpio_request calls -from mach files succeed. - ---- a/drivers/gpio/gpio-ath79.c -+++ b/drivers/gpio/gpio-ath79.c -@@ -322,7 +322,11 @@ static struct platform_driver ath79_gpio - .remove = ath79_gpio_remove, - }; - --module_platform_driver(ath79_gpio_driver); -+static int __init ath79_gpio_init(void) -+{ -+ return platform_driver_register(&ath79_gpio_driver); -+} -+postcore_initcall(ath79_gpio_init); - - MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support"); - MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ar71xx/patches-4.14/100-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch b/target/linux/ar71xx/patches-4.14/100-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch deleted file mode 100644 index 8d5b089986..0000000000 --- a/target/linux/ar71xx/patches-4.14/100-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 8b7a76e72fc819753878cd5684e243f33f847c79 Mon Sep 17 00:00:00 2001 -From: Markos Chandras <markos.chandras@imgtec.com> -Date: Wed, 21 Aug 2013 11:47:22 +0100 -Subject: [PATCH] MIPS: ath79: Avoid using unitialized 'reg' variable - -Fixes the following build error: -arch/mips/include/asm/mach-ath79/ath79.h:139:20: error: 'reg' may be used -uninitialized in this function [-Werror=maybe-uninitialized] -arch/mips/ath79/common.c:62:6: note: 'reg' was declared here -In file included from arch/mips/ath79/common.c:20:0: -arch/mips/ath79/common.c: In function 'ath79_device_reset_clear': -arch/mips/include/asm/mach-ath79/ath79.h:139:20: -error: 'reg' may be used uninitialized in this function -[-Werror=maybe-uninitialized] -arch/mips/ath79/common.c:90:6: note: 'reg' was declared here - -Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> -Acked-by: Gabor Juhos <juhosg@openwrt.org> ---- - arch/mips/ath79/common.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/mips/ath79/common.c -+++ b/arch/mips/ath79/common.c -@@ -106,7 +106,7 @@ void ath79_device_reset_set(u32 mask) - else if (soc_is_qca955x()) - reg = QCA955X_RESET_REG_RESET_MODULE; - else -- BUG(); -+ panic("Reset register not defined for this SOC"); - - spin_lock_irqsave(&ath79_device_reset_lock, flags); - t = ath79_reset_rr(reg); -@@ -134,7 +134,7 @@ void ath79_device_reset_clear(u32 mask) - else if (soc_is_qca955x()) - reg = QCA955X_RESET_REG_RESET_MODULE; - else -- BUG(); -+ panic("Reset register not defined for this SOC"); - - spin_lock_irqsave(&ath79_device_reset_lock, flags); - t = ath79_reset_rr(reg); diff --git a/target/linux/ar71xx/patches-4.14/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch b/target/linux/ar71xx/patches-4.14/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch deleted file mode 100644 index 3af99bf3b5..0000000000 --- a/target/linux/ar71xx/patches-4.14/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch +++ /dev/null @@ -1,113 +0,0 @@ -From 460f382c278fe66059a773c41cbcd0db86d53983 Mon Sep 17 00:00:00 2001 -From: Mathias Kresin <dev@kresin.me> -Date: Thu, 13 Apr 2017 09:47:42 +0200 -Subject: [PATCH] MIPS: pci-ar724x: get PCIe controller out of reset - -The ar724x pci driver expects the PCIe controller to be brought out of -reset by the bootloader. - -At least the AVM Fritz 300E bootloader doesn't take care of releasing -the different PCIe controller related resets which causes an endless -hang as soon as either the PCIE Reset register (0x180f0018) or the PCI -Application Control register (0x180f0000) is read from. - -Do the full "PCIE Root Complex Initialization Sequence" if the PCIe -host controller is still in reset during probing. - -The QCA u-boot sleeps 10ms after the PCIE Application Control bit is -set to ready. It has been shown that 10ms might not be enough time if -PCIe should be used right after setting the bit. During my tests it -took up to 20ms till the link was up. Giving the link up to 100ms -should work for all cases. - -Signed-off-by: Mathias Kresin <dev@kresin.me> ---- - arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 3 ++ - arch/mips/pci/pci-ar724x.c | 42 ++++++++++++++++++++++++++ - 2 files changed, 45 insertions(+) - ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -169,6 +169,9 @@ - #define AR724X_PLL_REG_CPU_CONFIG 0x00 - #define AR724X_PLL_REG_PCIE_CONFIG 0x10 - -+#define AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS BIT(16) -+#define AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET BIT(25) -+ - #define AR724X_PLL_FB_SHIFT 0 - #define AR724X_PLL_FB_MASK 0x3ff - #define AR724X_PLL_REF_DIV_SHIFT 10 ---- a/arch/mips/pci/pci-ar724x.c -+++ b/arch/mips/pci/pci-ar724x.c -@@ -12,14 +12,18 @@ - #include <linux/irq.h> - #include <linux/pci.h> - #include <linux/init.h> -+#include <linux/delay.h> - #include <linux/platform_device.h> - #include <asm/mach-ath79/ath79.h> - #include <asm/mach-ath79/ar71xx_regs.h> - -+#define AR724X_PCI_REG_APP 0x0 - #define AR724X_PCI_REG_RESET 0x18 - #define AR724X_PCI_REG_INT_STATUS 0x4c - #define AR724X_PCI_REG_INT_MASK 0x50 - -+#define AR724X_PCI_APP_LTSSM_ENABLE BIT(0) -+ - #define AR724X_PCI_RESET_LINK_UP BIT(0) - - #define AR724X_PCI_INT_DEV0 BIT(14) -@@ -325,6 +329,37 @@ static void ar724x_pci_irq_init(struct a - apc); - } - -+static void ar724x_pci_hw_init(struct ar724x_pci_controller *apc) -+{ -+ u32 ppl, app; -+ int wait = 0; -+ -+ /* deassert PCIe host controller and PCIe PHY reset */ -+ ath79_device_reset_clear(AR724X_RESET_PCIE); -+ ath79_device_reset_clear(AR724X_RESET_PCIE_PHY); -+ -+ /* remove the reset of the PCIE PLL */ -+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG); -+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET; -+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl); -+ -+ /* deassert bypass for the PCIE PLL */ -+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG); -+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS; -+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl); -+ -+ /* set PCIE Application Control to ready */ -+ app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP); -+ app |= AR724X_PCI_APP_LTSSM_ENABLE; -+ __raw_writel(app, apc->ctrl_base + AR724X_PCI_REG_APP); -+ -+ /* wait up to 100ms for PHY link up */ -+ do { -+ mdelay(10); -+ wait++; -+ } while (wait < 10 && !ar724x_pci_check_link(apc)); -+} -+ - static int ar724x_pci_probe(struct platform_device *pdev) - { - struct ar724x_pci_controller *apc; -@@ -383,6 +418,13 @@ static int ar724x_pci_probe(struct platf - apc->pci_controller.io_resource = &apc->io_res; - apc->pci_controller.mem_resource = &apc->mem_res; - -+ /* -+ * Do the full PCIE Root Complex Initialization Sequence if the PCIe -+ * host controller is in reset. -+ */ -+ if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE) -+ ar724x_pci_hw_init(apc); -+ - apc->link_up = ar724x_pci_check_link(apc); - if (!apc->link_up) - dev_warn(&pdev->dev, "PCIe link is down\n"); diff --git a/target/linux/ar71xx/patches-4.14/200-MIPS-ath79-fix-ar933x-wmac-reset.patch b/target/linux/ar71xx/patches-4.14/200-MIPS-ath79-fix-ar933x-wmac-reset.patch deleted file mode 100644 index b7ae0ce649..0000000000 --- a/target/linux/ar71xx/patches-4.14/200-MIPS-ath79-fix-ar933x-wmac-reset.patch +++ /dev/null @@ -1,30 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -62,10 +62,26 @@ static void __init ar913x_wmac_setup(voi - - static int ar933x_wmac_reset(void) - { -+ int retries = 20; -+ - ath79_device_reset_set(AR933X_RESET_WMAC); - ath79_device_reset_clear(AR933X_RESET_WMAC); - -- return 0; -+ while (1) { -+ u32 bootstrap; -+ -+ bootstrap = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); -+ if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0) -+ return 0; -+ -+ if (retries-- == 0) -+ break; -+ -+ udelay(10000); -+ } -+ -+ pr_err("ar933x: WMAC reset timed out"); -+ return -ETIMEDOUT; - } - - static int ar933x_r1_get_wmac_revision(void) diff --git a/target/linux/ar71xx/patches-4.14/201-ar913x_wmac_external_reset.patch b/target/linux/ar71xx/patches-4.14/201-ar913x_wmac_external_reset.patch deleted file mode 100644 index 9b704a3c47..0000000000 --- a/target/linux/ar71xx/patches-4.14/201-ar913x_wmac_external_reset.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -44,7 +44,7 @@ static struct platform_device ath79_wmac - }, - }; - --static void __init ar913x_wmac_setup(void) -+static int ar913x_wmac_reset(void) - { - /* reset the WMAC */ - ath79_device_reset_set(AR913X_RESET_AMBA2WMAC); -@@ -53,10 +53,19 @@ static void __init ar913x_wmac_setup(voi - ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC); - mdelay(10); - -+ return 0; -+} -+ -+static void __init ar913x_wmac_setup(void) -+{ -+ ar913x_wmac_reset(); -+ - ath79_wmac_resources[0].start = AR913X_WMAC_BASE; - ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1; - ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2); - ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2); -+ -+ ath79_wmac_data.external_reset = ar913x_wmac_reset; - } - - diff --git a/target/linux/ar71xx/patches-4.14/202-MIPS-ath79-ar934x-wmac-revision.patch b/target/linux/ar71xx/patches-4.14/202-MIPS-ath79-ar934x-wmac-revision.patch deleted file mode 100644 index 0f8016f847..0000000000 --- a/target/linux/ar71xx/patches-4.14/202-MIPS-ath79-ar934x-wmac-revision.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -139,6 +139,8 @@ static void ar934x_wmac_setup(void) - ath79_wmac_data.is_clk_25mhz = false; - else - ath79_wmac_data.is_clk_25mhz = true; -+ -+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision; - } - - static void qca955x_wmac_setup(void) diff --git a/target/linux/ar71xx/patches-4.14/220-add_cpu_feature_overrides.patch b/target/linux/ar71xx/patches-4.14/220-add_cpu_feature_overrides.patch deleted file mode 100644 index d925f92624..0000000000 --- a/target/linux/ar71xx/patches-4.14/220-add_cpu_feature_overrides.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h -+++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h -@@ -36,6 +36,7 @@ - #define cpu_has_mdmx 0 - #define cpu_has_mips3d 0 - #define cpu_has_smartmips 0 -+#define cpu_has_rixi 0 - - #define cpu_has_mips32r1 1 - #define cpu_has_mips32r2 1 -@@ -43,6 +44,7 @@ - #define cpu_has_mips64r2 0 - - #define cpu_has_mipsmt 0 -+#define cpu_has_userlocal 0 - - #define cpu_has_64bits 0 - #define cpu_has_64bit_zero_reg 0 -@@ -51,5 +53,9 @@ - - #define cpu_dcache_line_size() 32 - #define cpu_icache_line_size() 32 -+#define cpu_has_vtag_icache 0 -+#define cpu_has_dc_aliases 1 -+#define cpu_has_ic_fills_f_dc 0 -+#define cpu_has_pindexed_dcache 0 - - #endif /* __ASM_MACH_ATH79_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/ar71xx/patches-4.14/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch b/target/linux/ar71xx/patches-4.14/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch deleted file mode 100644 index 0bc64b7a17..0000000000 --- a/target/linux/ar71xx/patches-4.14/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/arch/mips/include/asm/mips_machine.h -+++ b/arch/mips/include/asm/mips_machine.h -@@ -36,6 +36,18 @@ static struct mips_machine machine_##_ty - .mach_setup = _setup, \ - }; - -+#define MIPS_MACHINE_NONAME(_type, _id, _setup) \ -+static const char machine_id_##_type[] __initconst \ -+ __aligned(1) = _id; \ -+static struct mips_machine machine_##_type \ -+ __used __section(.mips.machines.init) = \ -+{ \ -+ .mach_type = _type, \ -+ .mach_id = machine_id_##_type, \ -+ .mach_name = NULL, \ -+ .mach_setup = _setup, \ -+}; -+ - extern long __mips_machines_start; - extern long __mips_machines_end; - diff --git a/target/linux/ar71xx/patches-4.14/310-lib-add-rle-decompression.patch b/target/linux/ar71xx/patches-4.14/310-lib-add-rle-decompression.patch deleted file mode 100644 index 727f4d8343..0000000000 --- a/target/linux/ar71xx/patches-4.14/310-lib-add-rle-decompression.patch +++ /dev/null @@ -1,124 +0,0 @@ ---- a/lib/Kconfig -+++ b/lib/Kconfig -@@ -265,6 +265,9 @@ config LZMA_COMPRESS - config LZMA_DECOMPRESS - tristate - -+config RLE_DECOMPRESS -+ tristate -+ - # - # These all provide a common interface (hence the apparent duplication with - # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.) ---- a/lib/Makefile -+++ b/lib/Makefile -@@ -146,6 +146,7 @@ obj-$(CONFIG_XZ_DEC) += xz/ - obj-$(CONFIG_RAID6_PQ) += raid6/ - obj-$(CONFIG_LZMA_COMPRESS) += lzma/ - obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/ -+obj-$(CONFIG_RLE_DECOMPRESS) += rle.o - - lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o - lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o ---- /dev/null -+++ b/include/linux/rle.h -@@ -0,0 +1,18 @@ -+#ifndef _RLE_H_ -+#define _RLE_H_ -+ -+#ifdef CONFIG_RLE_DECOMPRESS -+int rle_decode(const unsigned char *src, size_t srclen, -+ unsigned char *dst, size_t dstlen, -+ size_t *src_done, size_t *dst_done); -+#else -+static inline int -+rle_decode(const unsigned char *src, size_t srclen, -+ unsigned char *dst, size_t dstlen, -+ size_t *src_done, size_t *dst_done) -+{ -+ return -ENOTSUPP; -+} -+#endif /* CONFIG_RLE_DECOMPRESS */ -+ -+#endif /* _RLE_H_ */ ---- /dev/null -+++ b/lib/rle.c -@@ -0,0 +1,78 @@ -+/* -+ * RLE decoding routine -+ * -+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/rle.h> -+ -+int rle_decode(const unsigned char *src, size_t srclen, -+ unsigned char *dst, size_t dstlen, -+ size_t *src_done, size_t *dst_done) -+{ -+ size_t srcpos, dstpos; -+ int ret; -+ -+ srcpos = 0; -+ dstpos = 0; -+ ret = -EINVAL; -+ -+ /* sanity checks */ -+ if (!src || !srclen || !dst || !dstlen) -+ goto out; -+ -+ while (1) { -+ char count; -+ -+ if (srcpos >= srclen) -+ break; -+ -+ count = (char) src[srcpos++]; -+ if (count == 0) { -+ ret = 0; -+ break; -+ } -+ -+ if (count > 0) { -+ unsigned char c; -+ -+ if (srcpos >= srclen) -+ break; -+ -+ c = src[srcpos++]; -+ -+ while (count--) { -+ if (dstpos >= dstlen) -+ break; -+ -+ dst[dstpos++] = c; -+ } -+ } else { -+ count *= -1; -+ -+ while (count--) { -+ if (srcpos >= srclen) -+ break; -+ if (dstpos >= dstlen) -+ break; -+ dst[dstpos++] = src[srcpos++]; -+ } -+ } -+ } -+ -+out: -+ if (src_done) -+ *src_done = srcpos; -+ if (dst_done) -+ *dst_done = dstpos; -+ -+ return ret; -+} -+ -+EXPORT_SYMBOL_GPL(rle_decode); diff --git a/target/linux/ar71xx/patches-4.14/343-MIPS-ath79-Fix-potentially-missed-IRQ-handling-durin.patch b/target/linux/ar71xx/patches-4.14/343-MIPS-ath79-Fix-potentially-missed-IRQ-handling-durin.patch deleted file mode 100644 index 05a1d7ef0c..0000000000 --- a/target/linux/ar71xx/patches-4.14/343-MIPS-ath79-Fix-potentially-missed-IRQ-handling-durin.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 3fe7841bf5a582dc7fd198e5bf70162ea418a22a Mon Sep 17 00:00:00 2001 -From: Koen Vandeputte <koen.vandeputte@ncentric.com> -Date: Wed, 11 Sep 2019 11:02:19 +0200 -Subject: [PATCH] MIPS: ath79: Fix potentially missed IRQ handling during - dispatch - -If both interrupts are set in the current implementation -only the 1st will be handled and the 2nd will be skipped -due to the "if else" condition. - -Fix this by using the same approach as done for QCA955x -just below it. - -Fixes: fce5cc6e0ddc ("MIPS: ath79: add IRQ handling code for AR934X") -Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> -CC: Felix Fietkau <nbd@nbd.name> -CC: Gabor Juhos <juhosg@freemail.hu> -CC: James Hogan <jhogan@kernel.org> -CC: Paul Burton <paul.burton@mips.com> -CC: Ralf Baechle <ralf@linux-mips.org> -CC: stable@vger.kernel.org # v3.2+ ---- - arch/mips/ath79/irq.c | 12 +++++++++--- - 1 file changed, 9 insertions(+), 3 deletions(-) - ---- a/arch/mips/ath79/irq.c -+++ b/arch/mips/ath79/irq.c -@@ -32,15 +32,21 @@ static void ar934x_ip2_irq_dispatch(stru - u32 status; - - status = ath79_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS); -+ status &= AR934X_PCIE_WMAC_INT_PCIE_ALL | AR934X_PCIE_WMAC_INT_WMAC_ALL; -+ -+ if (status == 0) { -+ spurious_interrupt(); -+ return; -+ } - - if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) { - ath79_ddr_wb_flush(3); - generic_handle_irq(ATH79_IP2_IRQ(0)); -- } else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) { -+ } -+ -+ if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) { - ath79_ddr_wb_flush(4); - generic_handle_irq(ATH79_IP2_IRQ(1)); -- } else { -- spurious_interrupt(); - } - } - diff --git a/target/linux/ar71xx/patches-4.14/401-mtd-physmap-add-lock-unlock.patch b/target/linux/ar71xx/patches-4.14/401-mtd-physmap-add-lock-unlock.patch deleted file mode 100644 index db7b3ca83d..0000000000 --- a/target/linux/ar71xx/patches-4.14/401-mtd-physmap-add-lock-unlock.patch +++ /dev/null @@ -1,94 +0,0 @@ ---- a/drivers/mtd/maps/physmap.c -+++ b/drivers/mtd/maps/physmap.c -@@ -31,6 +31,66 @@ struct physmap_flash_info { - int vpp_refcnt; - }; - -+static struct platform_device *physmap_map2pdev(struct map_info *map) -+{ -+ return (struct platform_device *) map->map_priv_1; -+} -+ -+static void physmap_lock(struct map_info *map) -+{ -+ struct platform_device *pdev; -+ struct physmap_flash_data *physmap_data; -+ -+ pdev = physmap_map2pdev(map); -+ physmap_data = pdev->dev.platform_data; -+ physmap_data->lock(pdev); -+} -+ -+static void physmap_unlock(struct map_info *map) -+{ -+ struct platform_device *pdev; -+ struct physmap_flash_data *physmap_data; -+ -+ pdev = physmap_map2pdev(map); -+ physmap_data = pdev->dev.platform_data; -+ physmap_data->unlock(pdev); -+} -+ -+static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs) -+{ -+ map_word ret; -+ -+ physmap_lock(map); -+ ret = inline_map_read(map, ofs); -+ physmap_unlock(map); -+ -+ return ret; -+} -+ -+static void physmap_flash_write_lock(struct map_info *map, map_word d, -+ unsigned long ofs) -+{ -+ physmap_lock(map); -+ inline_map_write(map, d, ofs); -+ physmap_unlock(map); -+} -+ -+static void physmap_flash_copy_from_lock(struct map_info *map, void *to, -+ unsigned long from, ssize_t len) -+{ -+ physmap_lock(map); -+ inline_map_copy_from(map, to, from, len); -+ physmap_unlock(map); -+} -+ -+static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to, -+ const void *from, ssize_t len) -+{ -+ physmap_lock(map); -+ inline_map_copy_to(map, to, from, len); -+ physmap_unlock(map); -+} -+ - static int physmap_flash_remove(struct platform_device *dev) - { - struct physmap_flash_info *info; -@@ -153,6 +213,13 @@ static int physmap_flash_probe(struct pl - - simple_map_init(&info->map[i]); - -+ if (physmap_data->lock && physmap_data->unlock) { -+ info->map[i].read = physmap_flash_read_lock; -+ info->map[i].write = physmap_flash_write_lock; -+ info->map[i].copy_from = physmap_flash_copy_from_lock; -+ info->map[i].copy_to = physmap_flash_copy_to_lock; -+ } -+ - probe_type = rom_probe_types; - if (physmap_data->probe_type == NULL) { - for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++) ---- a/include/linux/mtd/physmap.h -+++ b/include/linux/mtd/physmap.h -@@ -25,6 +25,8 @@ struct physmap_flash_data { - unsigned int width; - int (*init)(struct platform_device *); - void (*exit)(struct platform_device *); -+ void (*lock)(struct platform_device *); -+ void (*unlock)(struct platform_device *); - void (*set_vpp)(struct platform_device *, int); - unsigned int nr_parts; - unsigned int pfow_base; diff --git a/target/linux/ar71xx/patches-4.14/402-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-4.14/402-mtd-SST39VF6401B-support.patch deleted file mode 100644 index 0d483ab1a4..0000000000 --- a/target/linux/ar71xx/patches-4.14/402-mtd-SST39VF6401B-support.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/mtd/chips/jedec_probe.c -+++ b/drivers/mtd/chips/jedec_probe.c -@@ -148,6 +148,7 @@ - #define SST39LF160 0x2782 - #define SST39VF1601 0x234b - #define SST39VF3201 0x235b -+#define SST39VF6401B 0x236d - #define SST39WF1601 0x274b - #define SST39WF1602 0x274a - #define SST39LF512 0x00D4 -@@ -1569,6 +1570,18 @@ static const struct amd_flash_info jedec - ERASEINFO(0x10000,64), - } - }, { -+ .mfr_id = CFI_MFR_SST, -+ .dev_id = SST39VF6401B, -+ .name = "SST 39VF6401B", -+ .devtypes = CFI_DEVICETYPE_X16, -+ .uaddr = MTD_UADDR_0xAAAA_0x5555, -+ .dev_size = SIZE_8MiB, -+ .cmd_set = P_ID_AMD_STD, -+ .nr_regions = 1, -+ .regions = { -+ ERASEINFO(0x10000,128) -+ } -+ }, { - .mfr_id = CFI_MFR_ST, - .dev_id = M29F800AB, - .name = "ST M29F800AB", diff --git a/target/linux/ar71xx/patches-4.14/404-mtd-cybertan-trx-parser.patch b/target/linux/ar71xx/patches-4.14/404-mtd-cybertan-trx-parser.patch deleted file mode 100644 index 4b59abe16b..0000000000 --- a/target/linux/ar71xx/patches-4.14/404-mtd-cybertan-trx-parser.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -178,6 +178,12 @@ menu "Partition parsers" - source "drivers/mtd/parsers/Kconfig" - endmenu - -+config MTD_CYBERTAN_PARTS -+ tristate "Cybertan partitioning support" -+ depends on ATH79 -+ ---help--- -+ Cybertan partitioning support -+ - config MTD_MYLOADER_PARTS - tristate "MyLoader partition parsing" - depends on ADM5120 || ATH25 || ATH79 ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -18,6 +18,7 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63 - obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o - obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o - obj-y += parsers/ -+obj-$(CONFIG_MTD_CYBERTAN_PARTS) += cybertan_part.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o diff --git a/target/linux/ar71xx/patches-4.14/405-mtd-tp-link-partition-parser.patch b/target/linux/ar71xx/patches-4.14/405-mtd-tp-link-partition-parser.patch deleted file mode 100644 index 899ab893f0..0000000000 --- a/target/linux/ar71xx/patches-4.14/405-mtd-tp-link-partition-parser.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -200,6 +200,12 @@ config MTD_MYLOADER_PARTS - You will still need the parsing functions to be called by the driver - for your particular device. It won't happen automatically. - -+config MTD_TPLINK_PARTS -+ tristate "TP-Link AR7XXX/AR9XXX partitioning support" -+ depends on ATH79 -+ ---help--- -+ TBD. -+ - comment "User Modules And Translation Layers" - - # ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -18,6 +18,7 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63 - obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o - obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o - obj-y += parsers/ -+obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o - obj-$(CONFIG_MTD_CYBERTAN_PARTS) += cybertan_part.o - - # 'Users' - code which presents functionality to userspace. diff --git a/target/linux/ar71xx/patches-4.14/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch b/target/linux/ar71xx/patches-4.14/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch deleted file mode 100644 index 13999064cb..0000000000 --- a/target/linux/ar71xx/patches-4.14/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -235,6 +235,7 @@ static ssize_t m25p80_read(struct spi_no - */ - static int m25p_probe(struct spi_device *spi) - { -+ struct mtd_part_parser_data ppdata = {0,}; - struct flash_platform_data *data; - struct m25p *flash; - struct spi_nor *nor; -@@ -300,8 +301,11 @@ static int m25p_probe(struct spi_device - if (ret) - return ret; - -- return mtd_device_register(&nor->mtd, data ? data->parts : NULL, -- data ? data->nr_parts : 0); -+ return mtd_device_parse_register(&nor->mtd, -+ data ? data->part_probes : NULL, -+ &ppdata, -+ data ? data->parts : NULL, -+ data ? data->nr_parts : 0); - } - - ---- a/include/linux/spi/flash.h -+++ b/include/linux/spi/flash.h -@@ -25,6 +25,7 @@ struct flash_platform_data { - unsigned int nr_parts; - - char *type; -+ const char **part_probes; - - /* we'll likely add more ... use JEDEC IDs, etc */ - }; diff --git a/target/linux/ar71xx/patches-4.14/408-mtd-redboot_partition_scan.patch b/target/linux/ar71xx/patches-4.14/408-mtd-redboot_partition_scan.patch deleted file mode 100644 index cd41e7ceb2..0000000000 --- a/target/linux/ar71xx/patches-4.14/408-mtd-redboot_partition_scan.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -76,12 +76,18 @@ static int parse_redboot_partitions(stru - static char nullstring[] = "unallocated"; - #endif - -+ buf = vmalloc(master->erasesize); -+ if (!buf) -+ return -ENOMEM; -+ -+ restart: - if ( directory < 0 ) { - offset = master->size + directory * master->erasesize; - while (mtd_block_isbad(master, offset)) { - if (!offset) { - nogood: - printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); -+ vfree(buf); - return -EIO; - } - offset -= master->erasesize; -@@ -94,10 +100,6 @@ static int parse_redboot_partitions(stru - goto nogood; - } - } -- buf = vmalloc(master->erasesize); -- -- if (!buf) -- return -ENOMEM; - - printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", - master->name, offset); -@@ -170,6 +172,11 @@ static int parse_redboot_partitions(stru - } - if (i == numslots) { - /* Didn't find it */ -+ if (offset + master->erasesize < master->size) { -+ /* not at the end of the flash yet, maybe next block :) */ -+ directory++; -+ goto restart; -+ } - printk(KERN_NOTICE "No RedBoot partition table detected in %s\n", - master->name); - ret = 0; diff --git a/target/linux/ar71xx/patches-4.14/409-mtd-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-4.14/409-mtd-rb4xx_nand_driver.patch deleted file mode 100644 index c4b26ecb72..0000000000 --- a/target/linux/ar71xx/patches-4.14/409-mtd-rb4xx_nand_driver.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -563,4 +563,8 @@ config MTD_NAND_MTK - Enables support for NAND controller on MTK SoCs. - This controller is found on mt27xx, mt81xx, mt65xx SoCs. - -+config MTD_NAND_RB4XX -+ tristate "NAND flash driver for RouterBoard 4xx series" -+ depends on MTD_NAND && ATH79_MACH_RB4XX -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27 - obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o - obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o - obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o -+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o - obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o - obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o - obj-$(CONFIG_MTD_NAND_OXNAS) += oxnas_nand.o diff --git a/target/linux/ar71xx/patches-4.14/410-mtd-rb750-nand-driver.patch b/target/linux/ar71xx/patches-4.14/410-mtd-rb750-nand-driver.patch deleted file mode 100644 index 08960f4358..0000000000 --- a/target/linux/ar71xx/patches-4.14/410-mtd-rb750-nand-driver.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -567,4 +567,8 @@ config MTD_NAND_RB4XX - tristate "NAND flash driver for RouterBoard 4xx series" - depends on MTD_NAND && ATH79_MACH_RB4XX - -+config MTD_NAND_RB750 -+ tristate "NAND flash driver for the RouterBoard 750" -+ depends on MTD_NAND && ATH79_MACH_RB750 -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -35,6 +35,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx - obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o - obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o - obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o -+obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o - obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o - obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o - obj-$(CONFIG_MTD_NAND_OXNAS) += oxnas_nand.o diff --git a/target/linux/ar71xx/patches-4.14/411-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-4.14/411-mtd-cfi_cmdset_0002-force-word-write.patch deleted file mode 100644 index 5a5320968f..0000000000 --- a/target/linux/ar71xx/patches-4.14/411-mtd-cfi_cmdset_0002-force-word-write.patch +++ /dev/null @@ -1,61 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -40,7 +40,7 @@ - #include <linux/mtd/xip.h> - - #define AMD_BOOTLOC_BUG --#define FORCE_WORD_WRITE 0 -+#define FORCE_WORD_WRITE 1 - - #define MAX_RETRIES 3 - -@@ -51,7 +51,9 @@ - - static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); - static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -+#if !FORCE_WORD_WRITE - static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -+#endif - static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); - static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); - static void cfi_amdstd_sync (struct mtd_info *); -@@ -202,6 +204,7 @@ static void fixup_amd_bootblock(struct m - } - #endif - -+#if !FORCE_WORD_WRITE - static void fixup_use_write_buffers(struct mtd_info *mtd) - { - struct map_info *map = mtd->priv; -@@ -211,6 +214,7 @@ static void fixup_use_write_buffers(stru - mtd->_write = cfi_amdstd_write_buffers; - } - } -+#endif /* !FORCE_WORD_WRITE */ - - /* Atmel chips don't use the same PRI format as AMD chips */ - static void fixup_convert_atmel_pri(struct mtd_info *mtd) -@@ -1798,6 +1802,7 @@ static int cfi_amdstd_write_words(struct - /* - * FIXME: interleaved mode not tested, and probably not supported! - */ -+#if !FORCE_WORD_WRITE - static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, - unsigned long adr, const u_char *buf, - int len) -@@ -1930,7 +1935,6 @@ static int __xipram do_write_buffer(stru - return ret; - } - -- - static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) - { -@@ -2005,6 +2009,7 @@ static int cfi_amdstd_write_buffers(stru - - return 0; - } -+#endif /* !FORCE_WORD_WRITE */ - - /* - * Wait for the flash chip to become ready to write data diff --git a/target/linux/ar71xx/patches-4.14/413-mtd-ar934x-nand-driver.patch b/target/linux/ar71xx/patches-4.14/413-mtd-ar934x-nand-driver.patch deleted file mode 100644 index a2f34f6776..0000000000 --- a/target/linux/ar71xx/patches-4.14/413-mtd-ar934x-nand-driver.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -571,4 +571,12 @@ config MTD_NAND_RB750 - tristate "NAND flash driver for the RouterBoard 750" - depends on MTD_NAND && ATH79_MACH_RB750 - -+config MTD_NAND_AR934X -+ tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs" -+ depends on (SOC_AR934X || SOC_QCA955X) -+ -+config MTD_NAND_AR934X_HW_ECC -+ bool "Hardware ECC support for the AR934X NAND Controller (EXPERIMENTAL)" -+ depends on MTD_NAND_AR934X -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams- - obj-$(CONFIG_MTD_NAND_DENALI) += denali.o - obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o - obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o -+obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nfc.o - obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o - obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o - obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o diff --git a/target/linux/ar71xx/patches-4.14/414-mtd-rb91x-nand-driver.patch b/target/linux/ar71xx/patches-4.14/414-mtd-rb91x-nand-driver.patch deleted file mode 100644 index f9784a2d13..0000000000 --- a/target/linux/ar71xx/patches-4.14/414-mtd-rb91x-nand-driver.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -571,6 +571,10 @@ config MTD_NAND_RB750 - tristate "NAND flash driver for the RouterBoard 750" - depends on MTD_NAND && ATH79_MACH_RB750 - -+config MTD_NAND_RB91X -+ tristate "NAND flash driver for the RouterBOARD 91x series" -+ depends on MTD_NAND && ATH79_MACH_RB91X -+ - config MTD_NAND_AR934X - tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs" - depends on (SOC_AR934X || SOC_QCA955X) ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -37,6 +37,7 @@ obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nan - obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o - obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o - obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o -+obj-$(CONFIG_MTD_NAND_RB91X) += rb91x_nand.o - obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o - obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o - obj-$(CONFIG_MTD_NAND_OXNAS) += oxnas_nand.o diff --git a/target/linux/ar71xx/patches-4.14/420-net-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-4.14/420-net-ar71xx_mac_driver.patch deleted file mode 100644 index 6377db0ac2..0000000000 --- a/target/linux/ar71xx/patches-4.14/420-net-ar71xx_mac_driver.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/drivers/net/ethernet/atheros/Kconfig -+++ b/drivers/net/ethernet/atheros/Kconfig -@@ -5,7 +5,7 @@ - config NET_VENDOR_ATHEROS - bool "Atheros devices" - default y -- depends on PCI -+ depends on (PCI || ATH79) - ---help--- - If you have a network (Ethernet) card belonging to this class, say Y. - -@@ -78,4 +78,6 @@ config ALX - To compile this driver as a module, choose M here. The module - will be called alx. - -+source drivers/net/ethernet/atheros/ag71xx/Kconfig -+ - endif # NET_VENDOR_ATHEROS ---- a/drivers/net/ethernet/atheros/Makefile -+++ b/drivers/net/ethernet/atheros/Makefile -@@ -3,6 +3,7 @@ - # Makefile for the Atheros network device drivers. - # - -+obj-$(CONFIG_AG71XX) += ag71xx/ - obj-$(CONFIG_ATL1) += atlx/ - obj-$(CONFIG_ATL2) += atlx/ - obj-$(CONFIG_ATL1E) += atl1e/ diff --git a/target/linux/ar71xx/patches-4.14/423-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-4.14/423-dsa-add-88e6063-driver.patch deleted file mode 100644 index 94172d01b7..0000000000 --- a/target/linux/ar71xx/patches-4.14/423-dsa-add-88e6063-driver.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/net/dsa/Kconfig -+++ b/drivers/net/dsa/Kconfig -@@ -3,6 +3,14 @@ menu "Distributed Switch Architecture dr - - source "drivers/net/dsa/b53/Kconfig" - -+config NET_DSA_MV88E6063 -+ bool "Marvell 88E6063 ethernet switch chip support" -+ depends on NET_DSA -+ select NET_DSA_TAG_TRAILER -+ ---help--- -+ This enables support for the Marvell 88E6063 ethernet switch -+ chip -+ - config NET_DSA_BCM_SF2 - tristate "Broadcom Starfighter 2 Ethernet switch support" - depends on HAS_IOMEM && NET_DSA && OF_MDIO ---- a/drivers/net/dsa/Makefile -+++ b/drivers/net/dsa/Makefile -@@ -7,6 +7,7 @@ obj-$(CONFIG_FIXED_PHY) += dsa_loop_bdi - endif - obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o - obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o -+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o - obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o - obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o - obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o diff --git a/target/linux/ar71xx/patches-4.14/430-drivers-link-spi-before-mtd.patch b/target/linux/ar71xx/patches-4.14/430-drivers-link-spi-before-mtd.patch deleted file mode 100644 index 2f1549710b..0000000000 --- a/target/linux/ar71xx/patches-4.14/430-drivers-link-spi-before-mtd.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/drivers/Makefile -+++ b/drivers/Makefile -@@ -83,8 +83,8 @@ obj-$(CONFIG_SCSI) += scsi/ - obj-y += nvme/ - obj-$(CONFIG_ATA) += ata/ - obj-$(CONFIG_TARGET_CORE) += target/ --obj-$(CONFIG_MTD) += mtd/ - obj-$(CONFIG_SPI) += spi/ -+obj-$(CONFIG_MTD) += mtd/ - obj-$(CONFIG_SPMI) += spmi/ - obj-$(CONFIG_HSI) += hsi/ - obj-y += net/ diff --git a/target/linux/ar71xx/patches-4.14/432-spi-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-4.14/432-spi-rb4xx-spi-driver.patch deleted file mode 100644 index 9b0148998f..0000000000 --- a/target/linux/ar71xx/patches-4.14/432-spi-rb4xx-spi-driver.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -563,6 +563,12 @@ config SPI_QUP - This driver can also be built as a module. If so, the module - will be called spi_qup. - -+config SPI_RB4XX -+ tristate "Mikrotik RB4XX SPI master" -+ depends on SPI_MASTER && ATH79_MACH_RB4XX -+ help -+ SPI controller driver for the Mikrotik RB4xx series boards. -+ - config SPI_S3C24XX - tristate "Samsung S3C24XX series SPI" - depends on ARCH_S3C24XX ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -77,6 +77,7 @@ obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx. - spi-pxa2xx-platform-objs := spi-pxa2xx.o spi-pxa2xx-dma.o - obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o - obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o -+obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o - obj-$(CONFIG_SPI_QUP) += spi-qup.o - obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o - obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o diff --git a/target/linux/ar71xx/patches-4.14/433-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-4.14/433-spi-rb4xx-cpld-driver.patch deleted file mode 100644 index 02c30c6631..0000000000 --- a/target/linux/ar71xx/patches-4.14/433-spi-rb4xx-cpld-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -801,6 +801,13 @@ config SPI_TLE62X0 - sysfs interface, with each line presented as a kind of GPIO - exposing both switch control and diagnostic feedback. - -+config SPI_RB4XX_CPLD -+ tristate "MikroTik RB4XX CPLD driver" -+ depends on ATH79_MACH_RB4XX -+ help -+ SPI driver for the Xilinx CPLD chip present on the -+ MikroTik RB4xx boards. -+ - # - # Add new SPI protocol masters in alphabetical order above this line - # ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -78,6 +78,7 @@ spi-pxa2xx-platform-objs := spi-pxa2xx. - obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o - obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o - obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o -+obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o - obj-$(CONFIG_SPI_QUP) += spi-qup.o - obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o - obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o diff --git a/target/linux/ar71xx/patches-4.14/435-spi-vsc7385_driver.patch b/target/linux/ar71xx/patches-4.14/435-spi-vsc7385_driver.patch deleted file mode 100644 index bef0c86761..0000000000 --- a/target/linux/ar71xx/patches-4.14/435-spi-vsc7385_driver.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -808,6 +808,11 @@ config SPI_RB4XX_CPLD - SPI driver for the Xilinx CPLD chip present on the - MikroTik RB4xx boards. - -+config SPI_VSC7385 -+ tristate "Vitesse VSC7385 ethernet switch driver" -+ help -+ SPI driver for the Vitesse VSC7385 ethernet switch. -+ - # - # Add new SPI protocol masters in alphabetical order above this line - # ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -105,6 +105,7 @@ spi-thunderx-objs := spi-cavium.o spi- - obj-$(CONFIG_SPI_THUNDERX) += spi-thunderx.o - obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o - obj-$(CONFIG_SPI_TXX9) += spi-txx9.o -+obj-$(CONFIG_SPI_VSC7385) += spi-vsc7385.o - obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o - obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o - obj-$(CONFIG_SPI_XLP) += spi-xlp.o diff --git a/target/linux/ar71xx/patches-4.14/440-leds-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-4.14/440-leds-wndr3700-usb-led-driver.patch deleted file mode 100644 index e5f7cc5c00..0000000000 --- a/target/linux/ar71xx/patches-4.14/440-leds-wndr3700-usb-led-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -696,6 +696,13 @@ config LEDS_NIC78BX - To compile this driver as a module, choose M here: the module - will be called leds-nic78bx. - -+config LEDS_WNDR3700_USB -+ tristate "NETGEAR WNDR3700 USB LED driver" -+ depends on LEDS_CLASS && ATH79_MACH_WNDR3700 -+ help -+ This option enables support for the USB LED found on the -+ NETGEAR WNDR3700 board. -+ - comment "LED Triggers" - source "drivers/leds/trigger/Kconfig" - ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -51,6 +51,7 @@ obj-$(CONFIG_LEDS_DA9052) += leds-da905 - obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o - obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o - obj-$(CONFIG_LEDS_PWM) += leds-pwm.o -+obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o - obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o - obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o - obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o diff --git a/target/linux/ar71xx/patches-4.14/441-leds-rb750-led-driver.patch b/target/linux/ar71xx/patches-4.14/441-leds-rb750-led-driver.patch deleted file mode 100644 index 012e6b4380..0000000000 --- a/target/linux/ar71xx/patches-4.14/441-leds-rb750-led-driver.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -703,6 +703,10 @@ config LEDS_WNDR3700_USB - This option enables support for the USB LED found on the - NETGEAR WNDR3700 board. - -+config LEDS_RB750 -+ tristate "LED driver for the Mikrotik RouterBOARD 750" -+ depends on LEDS_CLASS && ATH79_MACH_RB750 -+ - comment "LED Triggers" - source "drivers/leds/trigger/Kconfig" - ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -57,6 +57,7 @@ obj-$(CONFIG_LEDS_INTEL_SS4200) += leds - obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o - obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o - obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o -+obj-$(CONFIG_LEDS_RB750) += leds-rb750.o - obj-$(CONFIG_LEDS_NS2) += leds-ns2.o - obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o - obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o diff --git a/target/linux/ar71xx/patches-4.14/442-leds-gpio-allow-to-use-OPEN_-DRAIN-SOURCE-flags-with.patch b/target/linux/ar71xx/patches-4.14/442-leds-gpio-allow-to-use-OPEN_-DRAIN-SOURCE-flags-with.patch deleted file mode 100644 index 3dbf68b1ed..0000000000 --- a/target/linux/ar71xx/patches-4.14/442-leds-gpio-allow-to-use-OPEN_-DRAIN-SOURCE-flags-with.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 183148e0789bee1cd5c46ba49afcb211f636f8a2 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@freemail.hu> -Date: Mon, 15 Jan 2018 15:01:14 +0100 -Subject: [PATCH] leds: gpio: allow to use OPEN_{DRAIN,SOURCE} flags with - legacy GPIOs - -LEDs which are connected to open-source or open-drain type of GPIO lines -can be used only, if those are defined via devicetree. -Add two new fields to 'struct gpio_led' in order to make it possible to -specify this type of GPIO lines to the leds-gpio driver via platform data. -Also update the create_gpio_led() function to set the GPIOF_OPEN_DRAIN and -GPIOF_OPEN_SOURCE flags for the given GPIO line. - -Signed-off-by: Gabor Juhos <juhosg@freemail.hu> ---- - drivers/leds/leds-gpio.c | 6 ++++++ - include/linux/leds.h | 2 ++ - 2 files changed, 8 insertions(+) - ---- a/drivers/leds/leds-gpio.c -+++ b/drivers/leds/leds-gpio.c -@@ -100,6 +100,12 @@ static int create_gpio_led(const struct - if (template->active_low) - flags |= GPIOF_ACTIVE_LOW; - -+ if (template->open_drain) -+ flags |= GPIOF_OPEN_DRAIN; -+ -+ if (template->open_source) -+ flags |= GPIOF_OPEN_SOURCE; -+ - ret = devm_gpio_request_one(parent, template->gpio, flags, - template->name); - if (ret < 0) ---- a/include/linux/leds.h -+++ b/include/linux/leds.h -@@ -395,6 +395,8 @@ struct gpio_led { - unsigned default_state : 2; - unsigned retain_state_shutdown : 1; - /* default_state should be one of LEDS_GPIO_DEFSTATE_(ON|OFF|KEEP) */ -+ unsigned open_drain : 1; -+ unsigned open_source : 1; - struct gpio_desc *gpiod; - }; - #define LEDS_GPIO_DEFSTATE_OFF 0 diff --git a/target/linux/ar71xx/patches-4.14/450-gpio-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-4.14/450-gpio-nxp-74hc153-gpio-chip-driver.patch deleted file mode 100644 index 48a36cc4ec..0000000000 --- a/target/linux/ar71xx/patches-4.14/450-gpio-nxp-74hc153-gpio-chip-driver.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -1300,4 +1300,12 @@ config GPIO_VIPERBOARD - - endmenu - -+comment "Other GPIO expanders" -+ -+config GPIO_NXP_74HC153 -+ tristate "NXP 74HC153 Dual 4-input multiplexer" -+ help -+ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This -+ provides a GPIO interface supporting input mode only. -+ - endif ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -89,6 +89,7 @@ obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o - obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o - obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o - obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o -+obj-$(CONFIG_GPIO_NXP_74HC153) += gpio-nxp-74hc153.o - obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o - obj-$(CONFIG_GPIO_OMAP) += gpio-omap.o - obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o diff --git a/target/linux/ar71xx/patches-4.14/451-gpio-74x164-improve-platform-device-support.patch b/target/linux/ar71xx/patches-4.14/451-gpio-74x164-improve-platform-device-support.patch deleted file mode 100644 index b3c990ccec..0000000000 --- a/target/linux/ar71xx/patches-4.14/451-gpio-74x164-improve-platform-device-support.patch +++ /dev/null @@ -1,119 +0,0 @@ ---- a/drivers/gpio/gpio-74x164.c -+++ b/drivers/gpio/gpio-74x164.c -@@ -13,6 +13,7 @@ - #include <linux/init.h> - #include <linux/mutex.h> - #include <linux/spi/spi.h> -+#include <linux/spi/74x164.h> - #include <linux/gpio.h> - #include <linux/of_gpio.h> - #include <linux/slab.h> -@@ -105,9 +106,16 @@ static int gen_74x164_direction_output(s - static int gen_74x164_probe(struct spi_device *spi) - { - struct gen_74x164_chip *chip; -+ struct gen_74x164_chip_platform_data *pdata = spi->dev.platform_data; -+ struct device_node *np = spi->dev.of_node; - u32 nregs; - int ret; - -+ if (!np && !pdata) { -+ dev_err(&spi->dev, "No configuration data available.\n"); -+ return -EINVAL; -+ } -+ - /* - * bits_per_word cannot be configured in platform data - */ -@@ -117,12 +125,15 @@ static int gen_74x164_probe(struct spi_d - if (ret < 0) - return ret; - -- if (of_property_read_u32(spi->dev.of_node, "registers-number", -- &nregs)) { -- dev_err(&spi->dev, -- "Missing registers-number property in the DT.\n"); -- return -EINVAL; -- } -+ if (np) { -+ if (of_property_read_u32(np, "registers-number", &nregs)) { -+ dev_err(&spi->dev, -+ "Missing registers-number property in the DT.\n"); -+ return -EINVAL; -+ } -+ } else if (pdata) { -+ nregs = pdata->num_registers; -+ } - - chip = devm_kzalloc(&spi->dev, sizeof(*chip) + nregs, GFP_KERNEL); - if (!chip) -@@ -142,7 +153,11 @@ static int gen_74x164_probe(struct spi_d - chip->gpio_chip.get = gen_74x164_get_value; - chip->gpio_chip.set = gen_74x164_set_value; - chip->gpio_chip.set_multiple = gen_74x164_set_multiple; -- chip->gpio_chip.base = -1; -+ if (np) -+ chip->gpio_chip.base = -1; -+ else if (pdata) -+ chip->gpio_chip.base = pdata->base; -+ - - chip->registers = nregs; - chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers; -@@ -151,6 +166,9 @@ static int gen_74x164_probe(struct spi_d - chip->gpio_chip.parent = &spi->dev; - chip->gpio_chip.owner = THIS_MODULE; - -+ if (pdata && pdata->init_data) -+ memcpy(chip->buffer, pdata->init_data, chip->registers); -+ - mutex_init(&chip->lock); - - ret = __gen_74x164_write_config(chip); -@@ -180,17 +198,19 @@ static int gen_74x164_remove(struct spi_ - return 0; - } - -+#ifdef CONFIG_OF - static const struct of_device_id gen_74x164_dt_ids[] = { - { .compatible = "fairchild,74hc595" }, - { .compatible = "nxp,74lvc594" }, - {}, - }; - MODULE_DEVICE_TABLE(of, gen_74x164_dt_ids); -+#endif - - static struct spi_driver gen_74x164_driver = { - .driver = { - .name = "74x164", -- .of_match_table = gen_74x164_dt_ids, -+ .of_match_table = of_match_ptr(gen_74x164_dt_ids), - }, - .probe = gen_74x164_probe, - .remove = gen_74x164_remove, ---- /dev/null -+++ b/include/linux/spi/74x164.h -@@ -0,0 +1,13 @@ -+#ifndef LINUX_SPI_74X164_H -+#define LINUX_SPI_74X164_H -+ -+struct gen_74x164_chip_platform_data { -+ /* number assigned to the first GPIO */ -+ unsigned base; -+ /* number of chained registers */ -+ unsigned num_registers; -+ /* address of a buffer containing initial data */ -+ u8 *init_data; -+}; -+ -+#endif ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -1252,7 +1252,6 @@ menu "SPI GPIO expanders" - - config GPIO_74X164 - tristate "74x164 serial-in/parallel-out 8-bits shift register" -- depends on OF_GPIO - help - Driver for 74x164 compatible serial-in/parallel-out 8-outputs - shift registers. This driver can be used to provide access diff --git a/target/linux/ar71xx/patches-4.14/452-gpio-add-gpio-latch-driver.patch b/target/linux/ar71xx/patches-4.14/452-gpio-add-gpio-latch-driver.patch deleted file mode 100644 index 98e9123ce7..0000000000 --- a/target/linux/ar71xx/patches-4.14/452-gpio-add-gpio-latch-driver.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -1307,4 +1307,9 @@ config GPIO_NXP_74HC153 - Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This - provides a GPIO interface supporting input mode only. - -+config GPIO_LATCH -+ tristate "GPIO latch driver" -+ help -+ Say yes here to enable a GPIO latch driver. -+ - endif ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -63,6 +63,7 @@ obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz - obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o - obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o - obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o -+obj-$(CONFIG_GPIO_LATCH) += gpio-latch.o - obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o - obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o - obj-$(CONFIG_GPIO_LPC18XX) += gpio-lpc18xx.o diff --git a/target/linux/ar71xx/patches-4.14/461-spi-ath79-add-fast-flash-read.patch b/target/linux/ar71xx/patches-4.14/461-spi-ath79-add-fast-flash-read.patch deleted file mode 100644 index 45f6dfbf1b..0000000000 --- a/target/linux/ar71xx/patches-4.14/461-spi-ath79-add-fast-flash-read.patch +++ /dev/null @@ -1,60 +0,0 @@ ---- a/drivers/spi/spi-ath79.c -+++ b/drivers/spi/spi-ath79.c -@@ -102,9 +102,6 @@ static void ath79_spi_enable(struct ath7 - /* save CTRL register */ - sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL); - sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC); -- -- /* TODO: setup speed? */ -- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43); - } - - static void ath79_spi_disable(struct ath79_spi *sp) -@@ -204,6 +201,38 @@ static u32 ath79_spi_txrx_mode0(struct s - return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS); - } - -+static bool ath79_spi_flash_read_supported(struct spi_device *spi) -+{ -+ if (spi->chip_select || gpio_is_valid(spi->cs_gpio)) -+ return false; -+ -+ return true; -+} -+ -+static int ath79_spi_read_flash_data(struct spi_device *spi, -+ struct spi_flash_read_message *msg) -+{ -+ struct ath79_spi *sp = ath79_spidev_to_sp(spi); -+ -+ if (msg->addr_width > 3) -+ return -EOPNOTSUPP; -+ -+ /* disable GPIO mode */ -+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0); -+ -+ memcpy_fromio(msg->buf, sp->base + msg->from, msg->len); -+ -+ /* enable GPIO mode */ -+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO); -+ -+ /* restore IOC register */ -+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); -+ -+ msg->retlen = msg->len; -+ -+ return 0; -+} -+ - static int ath79_spi_probe(struct platform_device *pdev) - { - struct spi_master *master; -@@ -233,6 +262,8 @@ static int ath79_spi_probe(struct platfo - master->num_chipselect = pdata->num_chipselect; - master->cs_gpios = pdata->cs_gpios; - } -+ master->spi_flash_read = ath79_spi_read_flash_data; -+ master->flash_read_supported = ath79_spi_flash_read_supported; - - sp->bitbang.master = master; - sp->bitbang.chipselect = ath79_spi_chipselect; diff --git a/target/linux/ar71xx/patches-4.14/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch b/target/linux/ar71xx/patches-4.14/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch deleted file mode 100644 index efd7d8d82b..0000000000 --- a/target/linux/ar71xx/patches-4.14/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch +++ /dev/null @@ -1,111 +0,0 @@ ---- /dev/null -+++ b/arch/mips/include/asm/mach-ath79/mangle-port.h -@@ -0,0 +1,37 @@ -+/* -+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> -+ * -+ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h -+ * Copyright (C) 2003, 2004 Ralf Baechle -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H -+#define __ASM_MACH_ATH79_MANGLE_PORT_H -+ -+#ifdef CONFIG_PCI -+extern unsigned long (ath79_pci_swizzle_b)(unsigned long port); -+extern unsigned long (ath79_pci_swizzle_w)(unsigned long port); -+#else -+#define ath79_pci_swizzle_b(port) (port) -+#define ath79_pci_swizzle_w(port) (port) -+#endif -+ -+#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port) -+#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port) -+#define __swizzle_addr_l(port) (port) -+#define __swizzle_addr_q(port) (port) -+ -+# define ioswabb(a, x) (x) -+# define __mem_ioswabb(a, x) (x) -+# define ioswabw(a, x) (x) -+# define __mem_ioswabw(a, x) cpu_to_le16(x) -+# define ioswabl(a, x) (x) -+# define __mem_ioswabl(a, x) cpu_to_le32(x) -+# define ioswabq(a, x) (x) -+# define __mem_ioswabq(a, x) cpu_to_le64(x) -+ -+#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */ ---- a/arch/mips/ath79/pci.c -+++ b/arch/mips/ath79/pci.c -@@ -13,6 +13,7 @@ - */ - - #include <linux/init.h> -+#include <linux/export.h> - #include <linux/pci.h> - #include <linux/resource.h> - #include <linux/platform_device.h> -@@ -25,6 +26,9 @@ static int (*ath79_pci_plat_dev_init)(st - static const struct ath79_pci_irq *ath79_pci_irq_map; - static unsigned ath79_pci_nr_irqs; - -+static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port); -+static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port); -+ - static const struct ath79_pci_irq ar71xx_pci_irq_map[] = { - { - .slot = 17, -@@ -212,12 +216,50 @@ ath79_register_pci_ar724x(int id, - return pdev; - } - -+static inline bool ar71xx_is_pci_addr(unsigned long port) -+{ -+ unsigned long phys = CPHYSADDR(port); -+ -+ return (phys >= AR71XX_PCI_MEM_BASE && -+ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE); -+} -+ -+static unsigned long ar71xx_pci_swizzle_b(unsigned long port) -+{ -+ return ar71xx_is_pci_addr(port) ? port ^ 3 : port; -+} -+ -+static unsigned long ar71xx_pci_swizzle_w(unsigned long port) -+{ -+ return ar71xx_is_pci_addr(port) ? port ^ 2 : port; -+} -+ -+unsigned long ath79_pci_swizzle_b(unsigned long port) -+{ -+ if (__ath79_pci_swizzle_b) -+ return __ath79_pci_swizzle_b(port); -+ -+ return port; -+} -+EXPORT_SYMBOL(ath79_pci_swizzle_b); -+ -+unsigned long ath79_pci_swizzle_w(unsigned long port) -+{ -+ if (__ath79_pci_swizzle_w) -+ return __ath79_pci_swizzle_w(port); -+ -+ return port; -+} -+EXPORT_SYMBOL(ath79_pci_swizzle_w); -+ - int __init ath79_register_pci(void) - { - struct platform_device *pdev = NULL; - - if (soc_is_ar71xx()) { - pdev = ath79_register_pci_ar71xx(); -+ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b; -+ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w; - } else if (soc_is_ar724x()) { - pdev = ath79_register_pci_ar724x(-1, - AR724X_PCI_CFG_BASE, diff --git a/target/linux/ar71xx/patches-4.14/490-usb-ehci-add-quirks-for-qca-socs.patch b/target/linux/ar71xx/patches-4.14/490-usb-ehci-add-quirks-for-qca-socs.patch deleted file mode 100644 index f9ee417bb4..0000000000 --- a/target/linux/ar71xx/patches-4.14/490-usb-ehci-add-quirks-for-qca-socs.patch +++ /dev/null @@ -1,103 +0,0 @@ ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -252,6 +252,37 @@ int ehci_reset(struct ehci_hcd *ehci) - command |= CMD_RESET; - dbg_cmd (ehci, "reset", command); - ehci_writel(ehci, command, &ehci->regs->command); -+ -+ if (ehci->qca_force_host_mode) { -+ u32 usbmode; -+ -+ udelay(1000); -+ -+ usbmode = ehci_readl(ehci, &ehci->regs->usbmode); -+ usbmode |= USBMODE_CM_HC | (1 << 4); -+ ehci_writel(ehci, usbmode, &ehci->regs->usbmode); -+ -+ ehci_dbg(ehci, "forced host mode, usbmode: %08x\n", -+ ehci_readl(ehci, &ehci->regs->usbmode)); -+ } -+ -+ if (ehci->qca_force_16bit_ptw) { -+ u32 port_status; -+ -+ udelay(1000); -+ -+ /* enable 16-bit UTMI interface */ -+ port_status = ehci_readl(ehci, &ehci->regs->port_status[0]); -+ port_status |= BIT(28); -+ ehci_writel(ehci, port_status, &ehci->regs->port_status[0]); -+ -+ ehci_dbg(ehci, "16-bit UTMI interface enabled, status: %08x\n", -+ ehci_readl(ehci, &ehci->regs->port_status[0])); -+ } -+ -+ if (ehci->reset_notifier) -+ ehci->reset_notifier(ehci_to_hcd(ehci)); -+ - ehci->rh_state = EHCI_RH_HALTED; - ehci->next_statechange = jiffies; - retval = ehci_handshake(ehci, &ehci->regs->command, ---- a/drivers/usb/host/ehci.h -+++ b/drivers/usb/host/ehci.h -@@ -232,6 +232,10 @@ struct ehci_hcd { /* one per controlle - unsigned need_oc_pp_cycle:1; /* MPC834X port power */ - unsigned imx28_write_fix:1; /* For Freescale i.MX28 */ - unsigned ignore_oc:1; -+ unsigned qca_force_host_mode:1; -+ unsigned qca_force_16bit_ptw:1; /* force 16 bit UTMI */ -+ -+ void (*reset_notifier)(struct usb_hcd *hcd); - - /* required for usb32 quirk */ - #define OHCI_CTRL_HCFS (3 << 6) ---- a/include/linux/usb/ehci_pdriver.h -+++ b/include/linux/usb/ehci_pdriver.h -@@ -50,6 +50,8 @@ struct usb_ehci_pdata { - unsigned reset_on_resume:1; - unsigned dma_mask_64:1; - unsigned ignore_oc:1; -+ unsigned qca_force_host_mode:1; -+ unsigned qca_force_16bit_ptw:1; - - /* Turn on all power and clocks */ - int (*power_on)(struct platform_device *pdev); -@@ -59,6 +61,7 @@ struct usb_ehci_pdata { - * turn off everything else */ - void (*power_suspend)(struct platform_device *pdev); - int (*pre_setup)(struct usb_hcd *hcd); -+ void (*reset_notifier)(struct platform_device *pdev); - }; - - #endif /* __USB_CORE_EHCI_PDRIVER_H */ ---- a/drivers/usb/host/ehci-platform.c -+++ b/drivers/usb/host/ehci-platform.c -@@ -53,6 +53,14 @@ struct ehci_platform_priv { - - static const char hcd_name[] = "ehci-platform"; - -+static void ehci_platform_reset_notifier(struct usb_hcd *hcd) -+{ -+ struct platform_device *pdev = to_platform_device(hcd->self.controller); -+ struct usb_ehci_pdata *pdata = pdev->dev.platform_data; -+ -+ pdata->reset_notifier(pdev); -+} -+ - static int ehci_platform_reset(struct usb_hcd *hcd) - { - struct platform_device *pdev = to_platform_device(hcd->self.controller); -@@ -265,6 +273,13 @@ static int ehci_platform_probe(struct pl - priv->reset_on_resume = true; - if (pdata->ignore_oc) - ehci->ignore_oc = 1; -+ if (pdata->qca_force_host_mode) -+ ehci->qca_force_host_mode = 1; -+ if (pdata->qca_force_16bit_ptw) -+ ehci->qca_force_16bit_ptw = 1; -+ -+ if (pdata->reset_notifier) -+ ehci->reset_notifier = ehci_platform_reset_notifier; - - #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO - if (ehci->big_endian_mmio) { diff --git a/target/linux/ar71xx/patches-4.14/500-MIPS-fw-myloader.patch b/target/linux/ar71xx/patches-4.14/500-MIPS-fw-myloader.patch deleted file mode 100644 index 1fdd05a4d9..0000000000 --- a/target/linux/ar71xx/patches-4.14/500-MIPS-fw-myloader.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -228,6 +228,7 @@ cflags-$(toolchain-virt) += -DTOOLCHAIN - # - libs-$(CONFIG_FW_ARC) += arch/mips/fw/arc/ - libs-$(CONFIG_FW_CFE) += arch/mips/fw/cfe/ -+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/ - libs-$(CONFIG_FW_SNIPROM) += arch/mips/fw/sni/ - libs-y += arch/mips/fw/lib/ - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -1153,6 +1153,9 @@ config MIPS_MSC - config MIPS_NILE4 - bool - -+config MYLOADER -+ bool -+ - config SYNC_R4K - bool - diff --git a/target/linux/ar71xx/patches-4.14/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch b/target/linux/ar71xx/patches-4.14/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch deleted file mode 100644 index 12ab3b50d6..0000000000 --- a/target/linux/ar71xx/patches-4.14/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch +++ /dev/null @@ -1,70 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -15,6 +15,7 @@ - #include <linux/init.h> - #include <linux/delay.h> - #include <linux/irq.h> -+#include <linux/etherdevice.h> - #include <linux/platform_device.h> - #include <linux/ath9k_platform.h> - -@@ -22,6 +23,7 @@ - #include <asm/mach-ath79/ar71xx_regs.h> - #include "dev-wmac.h" - -+static u8 ath79_wmac_mac[ETH_ALEN]; - static struct ath9k_platform_data ath79_wmac_data; - - static struct resource ath79_wmac_resources[] = { -@@ -161,7 +163,7 @@ static void qca955x_wmac_setup(void) - ath79_wmac_data.is_clk_25mhz = true; - } - --void __init ath79_register_wmac(u8 *cal_data) -+void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) - { - if (soc_is_ar913x()) - ar913x_wmac_setup(); -@@ -178,5 +180,10 @@ void __init ath79_register_wmac(u8 *cal_ - memcpy(ath79_wmac_data.eeprom_data, cal_data, - sizeof(ath79_wmac_data.eeprom_data)); - -+ if (mac_addr) { -+ memcpy(ath79_wmac_mac, mac_addr, sizeof(ath79_wmac_mac)); -+ ath79_wmac_data.macaddr = ath79_wmac_mac; -+ } -+ - platform_device_register(&ath79_wmac_device); - } ---- a/arch/mips/ath79/dev-wmac.h -+++ b/arch/mips/ath79/dev-wmac.h -@@ -12,6 +12,6 @@ - #ifndef _ATH79_DEV_WMAC_H - #define _ATH79_DEV_WMAC_H - --void ath79_register_wmac(u8 *cal_data); -+void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); - - #endif /* _ATH79_DEV_WMAC_H */ ---- a/arch/mips/ath79/mach-db120.c -+++ b/arch/mips/ath79/mach-db120.c -@@ -128,7 +128,7 @@ static void __init db120_setup(void) - ath79_register_spi(&db120_spi_data, db120_spi_info, - ARRAY_SIZE(db120_spi_info)); - ath79_register_usb(); -- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET); -+ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL); - db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET); - } - ---- a/arch/mips/ath79/mach-ap121.c -+++ b/arch/mips/ath79/mach-ap121.c -@@ -85,7 +85,7 @@ static void __init ap121_setup(void) - ath79_register_spi(&ap121_spi_data, ap121_spi_info, - ARRAY_SIZE(ap121_spi_info)); - ath79_register_usb(); -- ath79_register_wmac(cal_data); -+ ath79_register_wmac(cal_data, NULL); - } - - MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board", diff --git a/target/linux/ar71xx/patches-4.14/504-MIPS-ath79-add-ath79_device_reset_get.patch b/target/linux/ar71xx/patches-4.14/504-MIPS-ath79-add-ath79_device_reset_get.patch deleted file mode 100644 index c0e96b2729..0000000000 --- a/target/linux/ar71xx/patches-4.14/504-MIPS-ath79-add-ath79_device_reset_get.patch +++ /dev/null @@ -1,42 +0,0 @@ ---- a/arch/mips/include/asm/mach-ath79/ath79.h -+++ b/arch/mips/include/asm/mach-ath79/ath79.h -@@ -145,6 +145,7 @@ static inline u32 ath79_reset_rr(unsigne - - void ath79_device_reset_set(u32 mask); - void ath79_device_reset_clear(u32 mask); -+u32 ath79_device_reset_get(u32 mask); - - void ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3); - void ath79_misc_irq_init(void __iomem *regs, int irq, ---- a/arch/mips/ath79/common.c -+++ b/arch/mips/ath79/common.c -@@ -142,3 +142,29 @@ void ath79_device_reset_clear(u32 mask) - spin_unlock_irqrestore(&ath79_device_reset_lock, flags); - } - EXPORT_SYMBOL_GPL(ath79_device_reset_clear); -+ -+u32 ath79_device_reset_get(u32 mask) -+{ -+ unsigned long flags; -+ u32 reg; -+ u32 ret; -+ -+ if (soc_is_ar71xx()) -+ reg = AR71XX_RESET_REG_RESET_MODULE; -+ else if (soc_is_ar724x()) -+ reg = AR724X_RESET_REG_RESET_MODULE; -+ else if (soc_is_ar913x()) -+ reg = AR913X_RESET_REG_RESET_MODULE; -+ else if (soc_is_ar933x()) -+ reg = AR933X_RESET_REG_RESET_MODULE; -+ else if (soc_is_ar934x()) -+ reg = AR934X_RESET_REG_RESET_MODULE; -+ else -+ BUG(); -+ -+ spin_lock_irqsave(&ath79_device_reset_lock, flags); -+ ret = ath79_reset_rr(reg); -+ spin_unlock_irqrestore(&ath79_device_reset_lock, flags); -+ return ret; -+} -+EXPORT_SYMBOL_GPL(ath79_device_reset_get); diff --git a/target/linux/ar71xx/patches-4.14/505-MIPS-ath79-add-ath79_gpio_function_select.patch b/target/linux/ar71xx/patches-4.14/505-MIPS-ath79-add-ath79_gpio_function_select.patch deleted file mode 100644 index 278e781539..0000000000 --- a/target/linux/ar71xx/patches-4.14/505-MIPS-ath79-add-ath79_gpio_function_select.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/ath79/common.h -+++ b/arch/mips/ath79/common.h -@@ -27,6 +27,7 @@ void ath79_ddr_ctrl_init(void); - void ath79_gpio_function_enable(u32 mask); - void ath79_gpio_function_disable(u32 mask); - void ath79_gpio_function_setup(u32 set, u32 clear); -+void ath79_gpio_output_select(unsigned gpio, u8 val); - void ath79_gpio_init(void); - - #endif /* __ATH79_COMMON_H */ ---- a/arch/mips/ath79/gpio.c -+++ b/arch/mips/ath79/gpio.c -@@ -57,3 +57,26 @@ void ath79_gpio_function_disable(u32 mas - { - ath79_gpio_function_setup(0, mask); - } -+ -+void __init ath79_gpio_output_select(unsigned gpio, u8 val) -+{ -+ void __iomem *base = ath79_gpio_base; -+ unsigned int reg; -+ u32 t, s; -+ -+ BUG_ON(!soc_is_ar934x()); -+ -+ if (gpio >= AR934X_GPIO_COUNT) -+ return; -+ -+ reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4); -+ s = 8 * (gpio % 4); -+ -+ t = __raw_readl(base + reg); -+ t &= ~(0xff << s); -+ t |= val << s; -+ __raw_writel(t, base + reg); -+ -+ /* flush write */ -+ (void) __raw_readl(base + reg); -+} diff --git a/target/linux/ar71xx/patches-4.14/506-MIPS-ath79-prom-parse-redboot-args.patch b/target/linux/ar71xx/patches-4.14/506-MIPS-ath79-prom-parse-redboot-args.patch deleted file mode 100644 index 46beeffeea..0000000000 --- a/target/linux/ar71xx/patches-4.14/506-MIPS-ath79-prom-parse-redboot-args.patch +++ /dev/null @@ -1,42 +0,0 @@ ---- a/arch/mips/ath79/prom.c -+++ b/arch/mips/ath79/prom.c -@@ -22,10 +22,39 @@ - - #include "common.h" - -+static char ath79_cmdline_buf[COMMAND_LINE_SIZE] __initdata; -+ -+static void __init ath79_prom_append_cmdline(const char *name, -+ const char *value) -+{ -+ snprintf(ath79_cmdline_buf, sizeof(ath79_cmdline_buf), -+ " %s=%s", name, value); -+ strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline)); -+} -+ - void __init prom_init(void) - { -+ const char *env; -+ - fw_init_cmdline(); - -+ env = fw_getenv("ethaddr"); -+ if (env) -+ ath79_prom_append_cmdline("ethaddr", env); -+ -+ env = fw_getenv("board"); -+ if (env) { -+ /* Workaround for buggy bootloaders */ -+ if (strcmp(env, "RouterStation") == 0 || -+ strcmp(env, "Ubiquiti AR71xx-based board") == 0) -+ env = "UBNT-RS"; -+ -+ if (strcmp(env, "RouterStation PRO") == 0) -+ env = "UBNT-RSPRO"; -+ -+ ath79_prom_append_cmdline("board", env); -+ } -+ - #ifdef CONFIG_BLK_DEV_INITRD - /* Read the initrd address from the firmware environment */ - initrd_start = fw_getenvl("initrd_start"); diff --git a/target/linux/ar71xx/patches-4.14/507-MIPS-ath79-prom-add-myloader-support.patch b/target/linux/ar71xx/patches-4.14/507-MIPS-ath79-prom-add-myloader-support.patch deleted file mode 100644 index 17a97335d2..0000000000 --- a/target/linux/ar71xx/patches-4.14/507-MIPS-ath79-prom-add-myloader-support.patch +++ /dev/null @@ -1,55 +0,0 @@ ---- a/arch/mips/ath79/prom.c -+++ b/arch/mips/ath79/prom.c -@@ -19,6 +19,7 @@ - #include <asm/bootinfo.h> - #include <asm/addrspace.h> - #include <asm/fw/fw.h> -+#include <asm/fw/myloader/myloader.h> - - #include "common.h" - -@@ -32,10 +33,44 @@ static void __init ath79_prom_append_cmd - strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline)); - } - -+static int __init ath79_prom_init_myloader(void) -+{ -+ struct myloader_info *mylo; -+ char mac_buf[32]; -+ unsigned char *mac; -+ -+ mylo = myloader_get_info(); -+ if (!mylo) -+ return 0; -+ -+ switch (mylo->did) { -+ case DEVID_COMPEX_WP543: -+ ath79_prom_append_cmdline("board", "WP543"); -+ break; -+ case DEVID_COMPEX_WPE72: -+ ath79_prom_append_cmdline("board", "WPE72"); -+ break; -+ default: -+ pr_warn("prom: unknown device id: %x\n", mylo->did); -+ return 0; -+ } -+ -+ mac = mylo->macs[0]; -+ snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x", -+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); -+ -+ ath79_prom_append_cmdline("ethaddr", mac_buf); -+ -+ return 1; -+} -+ - void __init prom_init(void) - { - const char *env; - -+ if (ath79_prom_init_myloader()) -+ return; -+ - fw_init_cmdline(); - - env = fw_getenv("ethaddr"); diff --git a/target/linux/ar71xx/patches-4.14/508-MIPS-ath79-prom-image-command-line-hack.patch b/target/linux/ar71xx/patches-4.14/508-MIPS-ath79-prom-image-command-line-hack.patch deleted file mode 100644 index cfa5e72eec..0000000000 --- a/target/linux/ar71xx/patches-4.14/508-MIPS-ath79-prom-image-command-line-hack.patch +++ /dev/null @@ -1,73 +0,0 @@ ---- a/arch/mips/ath79/prom.c -+++ b/arch/mips/ath79/prom.c -@@ -33,6 +33,41 @@ static void __init ath79_prom_append_cmd - strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline)); - } - -+#ifdef CONFIG_IMAGE_CMDLINE_HACK -+extern char __image_cmdline[]; -+ -+static int __init ath79_use_image_cmdline(void) -+{ -+ char *p = __image_cmdline; -+ int replace = 0; -+ -+ if (*p == '-') { -+ replace = 1; -+ p++; -+ } -+ -+ if (*p == '\0') -+ return 0; -+ -+ if (replace) { -+ strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline)); -+ } else { -+ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); -+ strlcat(arcs_cmdline, p, sizeof(arcs_cmdline)); -+ } -+ -+ /* Validate and setup environment pointer */ -+ if (fw_arg2 < CKSEG0) -+ _fw_envp = NULL; -+ else -+ _fw_envp = (int *)fw_arg2; -+ -+ return 1; -+} -+#else -+static inline int ath79_use_image_cmdline(void) { return 0; } -+#endif -+ - static int __init ath79_prom_init_myloader(void) - { - struct myloader_info *mylo; -@@ -61,6 +96,8 @@ static int __init ath79_prom_init_myload - - ath79_prom_append_cmdline("ethaddr", mac_buf); - -+ ath79_use_image_cmdline(); -+ - return 1; - } - -@@ -71,7 +108,8 @@ void __init prom_init(void) - if (ath79_prom_init_myloader()) - return; - -- fw_init_cmdline(); -+ if (!ath79_use_image_cmdline()) -+ fw_init_cmdline(); - - env = fw_getenv("ethaddr"); - if (env) ---- a/arch/mips/fw/lib/cmdline.c -+++ b/arch/mips/fw/lib/cmdline.c -@@ -35,6 +35,7 @@ void __init fw_init_cmdline(void) - else - _fw_envp = (int *)fw_arg2; - -+ arcs_cmdline[0] = '\0'; - for (i = 1; i < fw_argc; i++) { - strlcat(arcs_cmdline, fw_argv(i), COMMAND_LINE_SIZE); - if (i < (fw_argc - 1)) diff --git a/target/linux/ar71xx/patches-4.14/509-MIPS-ath79-process-board-kernel-option.patch b/target/linux/ar71xx/patches-4.14/509-MIPS-ath79-process-board-kernel-option.patch deleted file mode 100644 index 139b09c1b0..0000000000 --- a/target/linux/ar71xx/patches-4.14/509-MIPS-ath79-process-board-kernel-option.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/ath79/setup.c -+++ b/arch/mips/ath79/setup.c -@@ -277,6 +277,8 @@ void __init plat_time_init(void) - mips_hpt_frequency = cpu_clk_rate / 2; - } - -+__setup("board=", mips_machtype_setup); -+ - static int __init ath79_setup(void) - { - if (mips_machtype == ATH79_MACH_GENERIC_OF) diff --git a/target/linux/ar71xx/patches-4.14/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch b/target/linux/ar71xx/patches-4.14/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch deleted file mode 100644 index 2d2235e292..0000000000 --- a/target/linux/ar71xx/patches-4.14/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -24,7 +24,10 @@ - #include "dev-wmac.h" - - static u8 ath79_wmac_mac[ETH_ALEN]; --static struct ath9k_platform_data ath79_wmac_data; -+ -+static struct ath9k_platform_data ath79_wmac_data = { -+ .led_pin = -1, -+}; - - static struct resource ath79_wmac_resources[] = { - { diff --git a/target/linux/ar71xx/patches-4.14/520-MIPS-ath79-enable-UART-function.patch b/target/linux/ar71xx/patches-4.14/520-MIPS-ath79-enable-UART-function.patch deleted file mode 100644 index c8649b7494..0000000000 --- a/target/linux/ar71xx/patches-4.14/520-MIPS-ath79-enable-UART-function.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/arch/mips/ath79/dev-common.c -+++ b/arch/mips/ath79/dev-common.c -@@ -81,6 +81,15 @@ void __init ath79_register_uart(void) - - uart_clk_rate = ath79_get_sys_clk_rate("uart"); - -+ if (soc_is_ar71xx()) -+ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_UART_EN); -+ else if (soc_is_ar724x()) -+ ath79_gpio_function_enable(AR724X_GPIO_FUNC_UART_EN); -+ else if (soc_is_ar913x()) -+ ath79_gpio_function_enable(AR913X_GPIO_FUNC_UART_EN); -+ else if (soc_is_ar933x()) -+ ath79_gpio_function_enable(AR933X_GPIO_FUNC_UART_EN); -+ - if (soc_is_ar71xx() || - soc_is_ar724x() || - soc_is_ar913x() || diff --git a/target/linux/ar71xx/patches-4.14/521-MIPS-ath79-enable-UART-for-early_serial.patch b/target/linux/ar71xx/patches-4.14/521-MIPS-ath79-enable-UART-for-early_serial.patch deleted file mode 100644 index e546ff26fe..0000000000 --- a/target/linux/ar71xx/patches-4.14/521-MIPS-ath79-enable-UART-for-early_serial.patch +++ /dev/null @@ -1,61 +0,0 @@ ---- a/arch/mips/ath79/early_printk.c -+++ b/arch/mips/ath79/early_printk.c -@@ -58,6 +58,46 @@ static void prom_putchar_dummy(unsigned - /* nothing to do */ - } - -+static void prom_enable_uart(u32 id) -+{ -+ void __iomem *gpio_base; -+ u32 uart_en; -+ u32 t; -+ -+ switch (id) { -+ case REV_ID_MAJOR_AR71XX: -+ uart_en = AR71XX_GPIO_FUNC_UART_EN; -+ break; -+ -+ case REV_ID_MAJOR_AR7240: -+ case REV_ID_MAJOR_AR7241: -+ case REV_ID_MAJOR_AR7242: -+ uart_en = AR724X_GPIO_FUNC_UART_EN; -+ break; -+ -+ case REV_ID_MAJOR_AR913X: -+ uart_en = AR913X_GPIO_FUNC_UART_EN; -+ break; -+ -+ case REV_ID_MAJOR_AR9330: -+ case REV_ID_MAJOR_AR9331: -+ uart_en = AR933X_GPIO_FUNC_UART_EN; -+ break; -+ -+ case REV_ID_MAJOR_AR9341: -+ case REV_ID_MAJOR_AR9342: -+ case REV_ID_MAJOR_AR9344: -+ /* TODO */ -+ default: -+ return; -+ } -+ -+ gpio_base = (void __iomem *)(KSEG1ADDR(AR71XX_GPIO_BASE)); -+ t = __raw_readl(gpio_base + AR71XX_GPIO_REG_FUNC); -+ t |= uart_en; -+ __raw_writel(t, gpio_base + AR71XX_GPIO_REG_FUNC); -+} -+ - static void prom_putchar_init(void) - { - void __iomem *base; -@@ -88,8 +128,10 @@ static void prom_putchar_init(void) - - default: - _prom_putchar = prom_putchar_dummy; -- break; -+ return; - } -+ -+ prom_enable_uart(id); - } - - void prom_putchar(unsigned char ch) diff --git a/target/linux/ar71xx/patches-4.14/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch b/target/linux/ar71xx/patches-4.14/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch deleted file mode 100644 index 2d5559cb9d..0000000000 --- a/target/linux/ar71xx/patches-4.14/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -190,3 +190,9 @@ void __init ath79_register_wmac(u8 *cal_ - - platform_device_register(&ath79_wmac_device); - } -+ -+void __init ath79_register_wmac_simple(void) -+{ -+ ath79_register_wmac(NULL, NULL); -+ ath79_wmac_data.eeprom_name = "soc_wmac.eeprom"; -+} ---- a/arch/mips/ath79/dev-wmac.h -+++ b/arch/mips/ath79/dev-wmac.h -@@ -13,5 +13,6 @@ - #define _ATH79_DEV_WMAC_H - - void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); -+void ath79_register_wmac_simple(void); - - #endif /* _ATH79_DEV_WMAC_H */ diff --git a/target/linux/ar71xx/patches-4.14/523-MIPS-ath79-OTP-support.patch b/target/linux/ar71xx/patches-4.14/523-MIPS-ath79-OTP-support.patch deleted file mode 100644 index d11d418f17..0000000000 --- a/target/linux/ar71xx/patches-4.14/523-MIPS-ath79-OTP-support.patch +++ /dev/null @@ -1,192 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -166,6 +166,149 @@ static void qca955x_wmac_setup(void) - ath79_wmac_data.is_clk_25mhz = true; - } - -+#define AR93XX_WMAC_SIZE \ -+ (soc_is_ar934x() ? AR934X_WMAC_SIZE : AR933X_WMAC_SIZE) -+#define AR93XX_WMAC_BASE \ -+ (soc_is_ar934x() ? AR934X_WMAC_BASE : AR933X_WMAC_BASE) -+ -+#define AR93XX_OTP_BASE \ -+ (soc_is_ar934x() ? AR934X_OTP_BASE : AR9300_OTP_BASE) -+#define AR93XX_OTP_STATUS \ -+ (soc_is_ar934x() ? AR934X_OTP_STATUS : AR9300_OTP_STATUS) -+#define AR93XX_OTP_READ_DATA \ -+ (soc_is_ar934x() ? AR934X_OTP_READ_DATA : AR9300_OTP_READ_DATA) -+ -+static bool __init -+ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data) -+{ -+ int timeout = 1000; -+ u32 val; -+ -+ __raw_readl(base + AR93XX_OTP_BASE + (4 * addr)); -+ while (timeout--) { -+ val = __raw_readl(base + AR93XX_OTP_STATUS); -+ if ((val & AR9300_OTP_STATUS_TYPE) == AR9300_OTP_STATUS_VALID) -+ break; -+ -+ udelay(10); -+ } -+ -+ if (!timeout) -+ return false; -+ -+ *data = __raw_readl(base + AR93XX_OTP_READ_DATA); -+ return true; -+} -+ -+static bool __init -+ar93xx_wmac_otp_read(void __iomem *base, int addr, u8 *dest, int len) -+{ -+ u32 data; -+ int i; -+ -+ for (i = 0; i < len; i++) { -+ int offset = 8 * ((addr - i) % 4); -+ -+ if (!ar93xx_wmac_otp_read_word(base, (addr - i) / 4, &data)) -+ return false; -+ -+ dest[i] = (data >> offset) & 0xff; -+ } -+ -+ return true; -+} -+ -+static bool __init -+ar93xx_wmac_otp_uncompress(void __iomem *base, int addr, int len, u8 *dest, -+ int dest_start, int dest_len) -+{ -+ int dest_bytes = 0; -+ int offset = 0; -+ int end = addr - len; -+ u8 hdr[2]; -+ -+ while (addr > end) { -+ if (!ar93xx_wmac_otp_read(base, addr, hdr, 2)) -+ return false; -+ -+ addr -= 2; -+ offset += hdr[0]; -+ -+ if (offset <= dest_start + dest_len && -+ offset + len >= dest_start) { -+ int data_offset = 0; -+ int dest_offset = 0; -+ int copy_len; -+ -+ if (offset < dest_start) -+ data_offset = dest_start - offset; -+ else -+ dest_offset = offset - dest_start; -+ -+ copy_len = len - data_offset; -+ if (copy_len > dest_len - dest_offset) -+ copy_len = dest_len - dest_offset; -+ -+ ar93xx_wmac_otp_read(base, addr - data_offset, -+ dest + dest_offset, -+ copy_len); -+ -+ dest_bytes += copy_len; -+ } -+ addr -= hdr[1]; -+ } -+ return !!dest_bytes; -+} -+ -+bool __init ar93xx_wmac_read_mac_address(u8 *dest) -+{ -+ void __iomem *base; -+ bool ret = false; -+ int addr = 0x1ff; -+ unsigned int len; -+ u32 hdr_u32; -+ u8 *hdr = (u8 *) &hdr_u32; -+ u8 mac[6] = { 0x00, 0x02, 0x03, 0x04, 0x05, 0x06 }; -+ int mac_start = 2, mac_end = 8; -+ -+ BUG_ON(!soc_is_ar933x() && !soc_is_ar934x()); -+ base = ioremap_nocache(AR93XX_WMAC_BASE, AR93XX_WMAC_SIZE); -+ while (addr > sizeof(hdr_u32)) { -+ if (!ar93xx_wmac_otp_read(base, addr, hdr, sizeof(hdr_u32))) -+ break; -+ -+ if (hdr_u32 == 0 || hdr_u32 == ~0) -+ break; -+ -+ len = (hdr[1] << 4) | (hdr[2] >> 4); -+ addr -= 4; -+ -+ switch (hdr[0] >> 5) { -+ case 0: -+ if (len < mac_end) -+ break; -+ -+ ar93xx_wmac_otp_read(base, addr - mac_start, mac, 6); -+ ret = true; -+ break; -+ case 3: -+ ret |= ar93xx_wmac_otp_uncompress(base, addr, len, mac, -+ mac_start, 6); -+ break; -+ default: -+ break; -+ } -+ -+ addr -= len + 2; -+ } -+ -+ iounmap(base); -+ if (ret) -+ memcpy(dest, mac, 6); -+ -+ return ret; -+} -+ - void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) - { - if (soc_is_ar913x()) ---- a/arch/mips/ath79/dev-wmac.h -+++ b/arch/mips/ath79/dev-wmac.h -@@ -14,5 +14,6 @@ - - void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); - void ath79_register_wmac_simple(void); -+bool ar93xx_wmac_read_mac_address(u8 *dest); - - #endif /* _ATH79_DEV_WMAC_H */ ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -112,6 +112,14 @@ - #define QCA955X_EHCI1_BASE 0x1b400000 - #define QCA955X_EHCI_SIZE 0x1000 - -+#define AR9300_OTP_BASE 0x14000 -+#define AR9300_OTP_STATUS 0x15f18 -+#define AR9300_OTP_STATUS_TYPE 0x7 -+#define AR9300_OTP_STATUS_VALID 0x4 -+#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2 -+#define AR9300_OTP_STATUS_SM_BUSY 0x1 -+#define AR9300_OTP_READ_DATA 0x15f1c -+ - /* - * DDR_CTRL block - */ -@@ -149,6 +157,13 @@ - #define AR934X_DDR_REG_FLUSH_PCIE 0xa8 - #define AR934X_DDR_REG_FLUSH_WMAC 0xac - -+#define AR934X_OTP_BASE 0x30000 -+#define AR934X_OTP_STATUS 0x31018 -+#define AR934X_OTP_READ_DATA 0x3101c -+#define AR934X_OTP_INTF2_ADDRESS 0x31008 -+#define AR934X_OTP_INTF3_ADDRESS 0x3100c -+#define AR934X_OTP_PGENB_SETUP_HOLD_TIME_ADDRESS 0x31034 -+ - /* - * PLL block - */ diff --git a/target/linux/ar71xx/patches-4.14/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch b/target/linux/ar71xx/patches-4.14/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch deleted file mode 100644 index 91e037e247..0000000000 --- a/target/linux/ar71xx/patches-4.14/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -309,6 +309,16 @@ bool __init ar93xx_wmac_read_mac_address - return ret; - } - -+void __init ath79_wmac_disable_2ghz(void) -+{ -+ ath79_wmac_data.disable_2ghz = true; -+} -+ -+void __init ath79_wmac_disable_5ghz(void) -+{ -+ ath79_wmac_data.disable_5ghz = true; -+} -+ - void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) - { - if (soc_is_ar913x()) ---- a/arch/mips/ath79/dev-wmac.h -+++ b/arch/mips/ath79/dev-wmac.h -@@ -14,6 +14,9 @@ - - void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); - void ath79_register_wmac_simple(void); -+void ath79_wmac_disable_2ghz(void); -+void ath79_wmac_disable_5ghz(void); -+ - bool ar93xx_wmac_read_mac_address(u8 *dest); - - #endif /* _ATH79_DEV_WMAC_H */ diff --git a/target/linux/ar71xx/patches-4.14/525-MIPS-ath79-enable-qca-usb-quirks.patch b/target/linux/ar71xx/patches-4.14/525-MIPS-ath79-enable-qca-usb-quirks.patch deleted file mode 100644 index 3cafbe290c..0000000000 --- a/target/linux/ar71xx/patches-4.14/525-MIPS-ath79-enable-qca-usb-quirks.patch +++ /dev/null @@ -1,101 +0,0 @@ ---- a/arch/mips/ath79/dev-usb.c -+++ b/arch/mips/ath79/dev-usb.c -@@ -37,6 +37,8 @@ static struct usb_ehci_pdata ath79_ehci_ - static struct usb_ehci_pdata ath79_ehci_pdata_v2 = { - .caps_offset = 0x100, - .has_tt = 1, -+ .qca_force_host_mode = 1, -+ .qca_force_16bit_ptw = 1, - }; - - static void __init ath79_usb_register(const char *name, int id, -@@ -159,6 +161,9 @@ static void __init ar913x_usb_setup(void - ath79_device_reset_clear(AR913X_RESET_USB_PHY); - mdelay(10); - -+ ath79_ehci_pdata_v2.qca_force_host_mode = 0; -+ ath79_ehci_pdata_v2.qca_force_16bit_ptw = 0; -+ - ath79_usb_register("ehci-platform", -1, - AR913X_EHCI_BASE, AR913X_EHCI_SIZE, - ATH79_CPU_IRQ(3), -@@ -182,14 +187,34 @@ static void __init ar933x_usb_setup(void - &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); - } - --static void __init ar934x_usb_setup(void) -+static void enable_tx_tx_idp_violation_fix(unsigned base) - { -- u32 bootstrap; -+ void __iomem *phy_reg; -+ u32 t; -+ -+ phy_reg = ioremap(base, 4); -+ if (!phy_reg) -+ return; -+ -+ t = ioread32(phy_reg); -+ t &= ~0xff; -+ t |= 0x58; -+ iowrite32(t, phy_reg); -+ -+ iounmap(phy_reg); -+} - -- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); -- if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE) -+static void ar934x_usb_reset_notifier(struct platform_device *pdev) -+{ -+ if (pdev->id != -1) - return; - -+ enable_tx_tx_idp_violation_fix(0x18116c94); -+ dev_info(&pdev->dev, "TX-TX IDP fix enabled\n"); -+} -+ -+static void __init ar934x_usb_setup(void) -+{ - ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE); - udelay(1000); - -@@ -202,14 +227,40 @@ static void __init ar934x_usb_setup(void - ath79_device_reset_clear(AR934X_RESET_USB_HOST); - udelay(1000); - -+ if (ath79_soc_rev >= 3) -+ ath79_ehci_pdata_v2.reset_notifier = ar934x_usb_reset_notifier; -+ - ath79_usb_register("ehci-platform", -1, - AR934X_EHCI_BASE, AR934X_EHCI_SIZE, - ATH79_CPU_IRQ(3), - &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); - } - -+static void qca955x_usb_reset_notifier(struct platform_device *pdev) -+{ -+ u32 base; -+ -+ switch (pdev->id) { -+ case 0: -+ base = 0x18116d94; -+ break; -+ -+ case 1: -+ base = 0x18116e54; -+ break; -+ -+ default: -+ return; -+ } -+ -+ enable_tx_tx_idp_violation_fix(base); -+ dev_info(&pdev->dev, "TX-TX IDP fix enabled\n"); -+} -+ - static void __init qca955x_usb_setup(void) - { -+ ath79_ehci_pdata_v2.reset_notifier = qca955x_usb_reset_notifier; -+ - ath79_usb_register("ehci-platform", 0, - QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE, - ATH79_IP3_IRQ(0), diff --git a/target/linux/ar71xx/patches-4.14/601-MIPS-ath79-add-more-register-defines.patch b/target/linux/ar71xx/patches-4.14/601-MIPS-ath79-add-more-register-defines.patch deleted file mode 100644 index d0f5b78901..0000000000 --- a/target/linux/ar71xx/patches-4.14/601-MIPS-ath79-add-more-register-defines.patch +++ /dev/null @@ -1,455 +0,0 @@ ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -20,6 +20,10 @@ - #include <linux/bitops.h> - - #define AR71XX_APB_BASE 0x18000000 -+#define AR71XX_GE0_BASE 0x19000000 -+#define AR71XX_GE0_SIZE 0x10000 -+#define AR71XX_GE1_BASE 0x1a000000 -+#define AR71XX_GE1_SIZE 0x10000 - #define AR71XX_EHCI_BASE 0x1b000000 - #define AR71XX_EHCI_SIZE 0x1000 - #define AR71XX_OHCI_BASE 0x1c000000 -@@ -39,6 +43,8 @@ - #define AR71XX_PLL_SIZE 0x100 - #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) - #define AR71XX_RESET_SIZE 0x100 -+#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000) -+#define AR71XX_MII_SIZE 0x100 - - #define AR71XX_PCI_MEM_BASE 0x10000000 - #define AR71XX_PCI_MEM_SIZE 0x07000000 -@@ -81,15 +87,21 @@ - - #define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000) - #define AR933X_UART_SIZE 0x14 -+#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -+#define AR933X_GMAC_SIZE 0x04 - #define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) - #define AR933X_WMAC_SIZE 0x20000 - #define AR933X_EHCI_BASE 0x1b000000 - #define AR933X_EHCI_SIZE 0x1000 - -+#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -+#define AR934X_GMAC_SIZE 0x14 - #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) - #define AR934X_WMAC_SIZE 0x20000 - #define AR934X_EHCI_BASE 0x1b000000 - #define AR934X_EHCI_SIZE 0x200 -+#define AR934X_NFC_BASE 0x1b000200 -+#define AR934X_NFC_SIZE 0xb8 - #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000) - #define AR934X_SRIF_SIZE 0x1000 - -@@ -106,11 +118,15 @@ - #define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000) - #define QCA955X_PCI_CTRL_SIZE 0x100 - -+#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -+#define QCA955X_GMAC_SIZE 0x40 - #define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) - #define QCA955X_WMAC_SIZE 0x20000 - #define QCA955X_EHCI0_BASE 0x1b000000 - #define QCA955X_EHCI1_BASE 0x1b400000 - #define QCA955X_EHCI_SIZE 0x1000 -+#define QCA955X_NFC_BASE 0x1b800200 -+#define QCA955X_NFC_SIZE 0xb8 - - #define AR9300_OTP_BASE 0x14000 - #define AR9300_OTP_STATUS 0x15f18 -@@ -181,6 +197,9 @@ - #define AR71XX_AHB_DIV_SHIFT 20 - #define AR71XX_AHB_DIV_MASK 0x7 - -+#define AR71XX_ETH0_PLL_SHIFT 17 -+#define AR71XX_ETH1_PLL_SHIFT 19 -+ - #define AR724X_PLL_REG_CPU_CONFIG 0x00 - #define AR724X_PLL_REG_PCIE_CONFIG 0x10 - -@@ -196,6 +215,8 @@ - #define AR724X_DDR_DIV_SHIFT 22 - #define AR724X_DDR_DIV_MASK 0x3 - -+#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c -+ - #define AR913X_PLL_REG_CPU_CONFIG 0x00 - #define AR913X_PLL_REG_ETH_CONFIG 0x04 - #define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14 -@@ -208,6 +229,9 @@ - #define AR913X_AHB_DIV_SHIFT 19 - #define AR913X_AHB_DIV_MASK 0x1 - -+#define AR913X_ETH0_PLL_SHIFT 20 -+#define AR913X_ETH1_PLL_SHIFT 22 -+ - #define AR933X_PLL_CPU_CONFIG_REG 0x00 - #define AR933X_PLL_CLOCK_CTRL_REG 0x08 - -@@ -229,6 +253,8 @@ - #define AR934X_PLL_CPU_CONFIG_REG 0x00 - #define AR934X_PLL_DDR_CONFIG_REG 0x04 - #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08 -+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24 -+#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c - - #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 - #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -@@ -261,9 +287,13 @@ - #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) - #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) - -+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6) -+ - #define QCA955X_PLL_CPU_CONFIG_REG 0x00 - #define QCA955X_PLL_DDR_CONFIG_REG 0x04 - #define QCA955X_PLL_CLK_CTRL_REG 0x08 -+#define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28 -+#define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48 - - #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 - #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -@@ -388,16 +418,83 @@ - #define AR913X_RESET_USB_HOST BIT(5) - #define AR913X_RESET_USB_PHY BIT(4) - -+#define AR933X_RESET_GE1_MDIO BIT(23) -+#define AR933X_RESET_GE0_MDIO BIT(22) -+#define AR933X_RESET_GE1_MAC BIT(13) - #define AR933X_RESET_WMAC BIT(11) -+#define AR933X_RESET_GE0_MAC BIT(9) - #define AR933X_RESET_USB_HOST BIT(5) - #define AR933X_RESET_USB_PHY BIT(4) - #define AR933X_RESET_USBSUS_OVERRIDE BIT(3) - -+#define AR934X_RESET_HOST BIT(31) -+#define AR934X_RESET_SLIC BIT(30) -+#define AR934X_RESET_HDMA BIT(29) -+#define AR934X_RESET_EXTERNAL BIT(28) -+#define AR934X_RESET_RTC BIT(27) -+#define AR934X_RESET_PCIE_EP_INT BIT(26) -+#define AR934X_RESET_CHKSUM_ACC BIT(25) -+#define AR934X_RESET_FULL_CHIP BIT(24) -+#define AR934X_RESET_GE1_MDIO BIT(23) -+#define AR934X_RESET_GE0_MDIO BIT(22) -+#define AR934X_RESET_CPU_NMI BIT(21) -+#define AR934X_RESET_CPU_COLD BIT(20) -+#define AR934X_RESET_HOST_RESET_INT BIT(19) -+#define AR934X_RESET_PCIE_EP BIT(18) -+#define AR934X_RESET_UART1 BIT(17) -+#define AR934X_RESET_DDR BIT(16) -+#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) -+#define AR934X_RESET_NANDF BIT(14) -+#define AR934X_RESET_GE1_MAC BIT(13) -+#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12) - #define AR934X_RESET_USB_PHY_ANALOG BIT(11) -+#define AR934X_RESET_HOST_DMA_INT BIT(10) -+#define AR934X_RESET_GE0_MAC BIT(9) -+#define AR934X_RESET_ETH_SWITCH BIT(8) -+#define AR934X_RESET_PCIE_PHY BIT(7) -+#define AR934X_RESET_PCIE BIT(6) - #define AR934X_RESET_USB_HOST BIT(5) - #define AR934X_RESET_USB_PHY BIT(4) - #define AR934X_RESET_USBSUS_OVERRIDE BIT(3) -+#define AR934X_RESET_LUT BIT(2) -+#define AR934X_RESET_MBOX BIT(1) -+#define AR934X_RESET_I2S BIT(0) -+ -+#define QCA955X_RESET_HOST BIT(31) -+#define QCA955X_RESET_SLIC BIT(30) -+#define QCA955X_RESET_HDMA BIT(29) -+#define QCA955X_RESET_EXTERNAL BIT(28) -+#define QCA955X_RESET_RTC BIT(27) -+#define QCA955X_RESET_PCIE_EP_INT BIT(26) -+#define QCA955X_RESET_CHKSUM_ACC BIT(25) -+#define QCA955X_RESET_FULL_CHIP BIT(24) -+#define QCA955X_RESET_GE1_MDIO BIT(23) -+#define QCA955X_RESET_GE0_MDIO BIT(22) -+#define QCA955X_RESET_CPU_NMI BIT(21) -+#define QCA955X_RESET_CPU_COLD BIT(20) -+#define QCA955X_RESET_HOST_RESET_INT BIT(19) -+#define QCA955X_RESET_PCIE_EP BIT(18) -+#define QCA955X_RESET_UART1 BIT(17) -+#define QCA955X_RESET_DDR BIT(16) -+#define QCA955X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) -+#define QCA955X_RESET_NANDF BIT(14) -+#define QCA955X_RESET_GE1_MAC BIT(13) -+#define QCA955X_RESET_SGMII_ANALOG BIT(12) -+#define QCA955X_RESET_USB_PHY_ANALOG BIT(11) -+#define QCA955X_RESET_HOST_DMA_INT BIT(10) -+#define QCA955X_RESET_GE0_MAC BIT(9) -+#define QCA955X_RESET_SGMII BIT(8) -+#define QCA955X_RESET_PCIE_PHY BIT(7) -+#define QCA955X_RESET_PCIE BIT(6) -+#define QCA955X_RESET_USB_HOST BIT(5) -+#define QCA955X_RESET_USB_PHY BIT(4) -+#define QCA955X_RESET_USBSUS_OVERRIDE BIT(3) -+#define QCA955X_RESET_LUT BIT(2) -+#define QCA955X_RESET_MBOX BIT(1) -+#define QCA955X_RESET_I2S BIT(0) - -+#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18) -+#define AR933X_BOOTSTRAP_EEPBUSY BIT(4) - #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) - - #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) -@@ -539,8 +636,22 @@ - #define AR71XX_GPIO_REG_INT_ENABLE 0x24 - #define AR71XX_GPIO_REG_FUNC 0x28 - -+#define AR934X_GPIO_REG_OUT_FUNC0 0x2c -+#define AR934X_GPIO_REG_OUT_FUNC1 0x30 -+#define AR934X_GPIO_REG_OUT_FUNC2 0x34 -+#define AR934X_GPIO_REG_OUT_FUNC3 0x38 -+#define AR934X_GPIO_REG_OUT_FUNC4 0x3c -+#define AR934X_GPIO_REG_OUT_FUNC5 0x40 - #define AR934X_GPIO_REG_FUNC 0x6c - -+#define QCA955X_GPIO_REG_OUT_FUNC0 0x2c -+#define QCA955X_GPIO_REG_OUT_FUNC1 0x30 -+#define QCA955X_GPIO_REG_OUT_FUNC2 0x34 -+#define QCA955X_GPIO_REG_OUT_FUNC3 0x38 -+#define QCA955X_GPIO_REG_OUT_FUNC4 0x3c -+#define QCA955X_GPIO_REG_OUT_FUNC5 0x40 -+#define QCA955X_GPIO_REG_FUNC 0x6c -+ - #define AR71XX_GPIO_COUNT 16 - #define AR7240_GPIO_COUNT 18 - #define AR7241_GPIO_COUNT 20 -@@ -570,4 +681,235 @@ - #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13 - #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7 - -+#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17) -+#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16) -+#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13) -+#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12) -+#define AR71XX_GPIO_FUNC_UART_EN BIT(8) -+#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4) -+#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0) -+ -+#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19) -+#define AR724X_GPIO_FUNC_SPI_EN BIT(18) -+#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14) -+#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13) -+#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12) -+#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11) -+#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10) -+#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9) -+#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) -+#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) -+#define AR724X_GPIO_FUNC_UART_EN BIT(1) -+#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0) -+ -+#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22) -+#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21) -+#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20) -+#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19) -+#define AR913X_GPIO_FUNC_I2S1_EN BIT(18) -+#define AR913X_GPIO_FUNC_I2S0_EN BIT(17) -+#define AR913X_GPIO_FUNC_SLIC_EN BIT(16) -+#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9) -+#define AR913X_GPIO_FUNC_UART_EN BIT(8) -+#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4) -+ -+#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31) -+#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30) -+#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29) -+#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27) -+#define AR933X_GPIO_FUNC_I2SO_EN BIT(26) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23) -+#define AR933X_GPIO_FUNC_SPI_EN BIT(18) -+#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14) -+#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) -+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) -+#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) -+#define AR933X_GPIO_FUNC_UART_EN BIT(1) -+#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0) -+ -+#define AR934X_GPIO_FUNC_CLK_OBS7_EN BIT(9) -+#define AR934X_GPIO_FUNC_CLK_OBS6_EN BIT(8) -+#define AR934X_GPIO_FUNC_CLK_OBS5_EN BIT(7) -+#define AR934X_GPIO_FUNC_CLK_OBS4_EN BIT(6) -+#define AR934X_GPIO_FUNC_CLK_OBS3_EN BIT(5) -+#define AR934X_GPIO_FUNC_CLK_OBS2_EN BIT(4) -+#define AR934X_GPIO_FUNC_CLK_OBS1_EN BIT(3) -+#define AR934X_GPIO_FUNC_CLK_OBS0_EN BIT(2) -+#define AR934X_GPIO_FUNC_JTAG_DISABLE BIT(1) -+ -+#define AR934X_GPIO_OUT_GPIO 0 -+#define AR934X_GPIO_OUT_SPI_CS1 7 -+#define AR934X_GPIO_OUT_LED_LINK0 41 -+#define AR934X_GPIO_OUT_LED_LINK1 42 -+#define AR934X_GPIO_OUT_LED_LINK2 43 -+#define AR934X_GPIO_OUT_LED_LINK3 44 -+#define AR934X_GPIO_OUT_LED_LINK4 45 -+#define AR934X_GPIO_OUT_EXT_LNA0 46 -+#define AR934X_GPIO_OUT_EXT_LNA1 47 -+ -+#define QCA955X_GPIO_FUNC_CLK_OBS7_EN BIT(9) -+#define QCA955X_GPIO_FUNC_CLK_OBS6_EN BIT(8) -+#define QCA955X_GPIO_FUNC_CLK_OBS5_EN BIT(7) -+#define QCA955X_GPIO_FUNC_CLK_OBS4_EN BIT(6) -+#define QCA955X_GPIO_FUNC_CLK_OBS3_EN BIT(5) -+#define QCA955X_GPIO_FUNC_CLK_OBS2_EN BIT(4) -+#define QCA955X_GPIO_FUNC_CLK_OBS1_EN BIT(3) -+#define QCA955X_GPIO_FUNC_JTAG_DISABLE BIT(1) -+ -+#define QCA955X_GPIO_OUT_GPIO 0 -+#define QCA955X_MII_EXT_MDI 1 -+#define QCA955X_SLIC_DATA_OUT 3 -+#define QCA955X_SLIC_PCM_FS 4 -+#define QCA955X_SLIC_PCM_CLK 5 -+#define QCA955X_SPI_CLK 8 -+#define QCA955X_SPI_CS_0 9 -+#define QCA955X_SPI_CS_1 10 -+#define QCA955X_SPI_CS_2 11 -+#define QCA955X_SPI_MISO 12 -+#define QCA955X_I2S_CLK 13 -+#define QCA955X_I2S_WS 14 -+#define QCA955X_I2S_SD 15 -+#define QCA955X_I2S_MCK 16 -+#define QCA955X_SPDIF_OUT 17 -+#define QCA955X_UART1_TD 18 -+#define QCA955X_UART1_RTS 19 -+#define QCA955X_UART1_RD 20 -+#define QCA955X_UART1_CTS 21 -+#define QCA955X_UART0_SOUT 22 -+#define QCA955X_SPDIF2_OUT 23 -+#define QCA955X_LED_SGMII_SPEED0 24 -+#define QCA955X_LED_SGMII_SPEED1 25 -+#define QCA955X_LED_SGMII_DUPLEX 26 -+#define QCA955X_LED_SGMII_LINK_UP 27 -+#define QCA955X_SGMII_SPEED0_INVERT 28 -+#define QCA955X_SGMII_SPEED1_INVERT 29 -+#define QCA955X_SGMII_DUPLEX_INVERT 30 -+#define QCA955X_SGMII_LINK_UP_INVERT 31 -+#define QCA955X_GE1_MII_MDO 32 -+#define QCA955X_GE1_MII_MDC 33 -+#define QCA955X_SWCOM2 38 -+#define QCA955X_SWCOM3 39 -+#define QCA955X_MAC2_GPIO 40 -+#define QCA955X_MAC3_GPIO 41 -+#define QCA955X_ATT_LED 42 -+#define QCA955X_PWR_LED 43 -+#define QCA955X_TX_FRAME 44 -+#define QCA955X_RX_CLEAR_EXTERNAL 45 -+#define QCA955X_LED_NETWORK_EN 46 -+#define QCA955X_LED_POWER_EN 47 -+#define QCA955X_WMAC_GLUE_WOW 68 -+#define QCA955X_RX_CLEAR_EXTENSION 70 -+#define QCA955X_CP_NAND_CS1 73 -+#define QCA955X_USB_SUSPEND 74 -+#define QCA955X_ETH_TX_ERR 75 -+#define QCA955X_DDR_DQ_OE 76 -+#define QCA955X_CLKREQ_N_EP 77 -+#define QCA955X_CLKREQ_N_RC 78 -+#define QCA955X_CLK_OBS0 79 -+#define QCA955X_CLK_OBS1 80 -+#define QCA955X_CLK_OBS2 81 -+#define QCA955X_CLK_OBS3 82 -+#define QCA955X_CLK_OBS4 83 -+#define QCA955X_CLK_OBS5 84 -+ -+/* -+ * MII_CTRL block -+ */ -+#define AR71XX_MII_REG_MII0_CTRL 0x00 -+#define AR71XX_MII_REG_MII1_CTRL 0x04 -+ -+#define AR71XX_MII_CTRL_IF_MASK 3 -+#define AR71XX_MII_CTRL_SPEED_SHIFT 4 -+#define AR71XX_MII_CTRL_SPEED_MASK 3 -+#define AR71XX_MII_CTRL_SPEED_10 0 -+#define AR71XX_MII_CTRL_SPEED_100 1 -+#define AR71XX_MII_CTRL_SPEED_1000 2 -+ -+#define AR71XX_MII0_CTRL_IF_GMII 0 -+#define AR71XX_MII0_CTRL_IF_MII 1 -+#define AR71XX_MII0_CTRL_IF_RGMII 2 -+#define AR71XX_MII0_CTRL_IF_RMII 3 -+ -+#define AR71XX_MII1_CTRL_IF_RGMII 0 -+#define AR71XX_MII1_CTRL_IF_RMII 1 -+ -+/* -+ * AR933X GMAC interface -+ */ -+#define AR933X_GMAC_REG_ETH_CFG 0x00 -+ -+#define AR933X_ETH_CFG_RGMII_GE0 BIT(0) -+#define AR933X_ETH_CFG_MII_GE0 BIT(1) -+#define AR933X_ETH_CFG_GMII_GE0 BIT(2) -+#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3) -+#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4) -+#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5) -+#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7) -+#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8) -+#define AR933X_ETH_CFG_RMII_GE0 BIT(9) -+#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0 -+#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10) -+ -+/* -+ * AR934X GMAC Interface -+ */ -+#define AR934X_GMAC_REG_ETH_CFG 0x00 -+ -+#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0) -+#define AR934X_ETH_CFG_MII_GMAC0 BIT(1) -+#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2) -+#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3) -+#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4) -+#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5) -+#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6) -+#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7) -+#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9) -+#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10) -+#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11) -+#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12) -+#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) -+#define AR934X_ETH_CFG_RXD_DELAY BIT(14) -+#define AR934X_ETH_CFG_RXD_DELAY_MASK 0x3 -+#define AR934X_ETH_CFG_RXD_DELAY_SHIFT 14 -+#define AR934X_ETH_CFG_RDV_DELAY BIT(16) -+#define AR934X_ETH_CFG_RDV_DELAY_MASK 0x3 -+#define AR934X_ETH_CFG_RDV_DELAY_SHIFT 16 -+ -+/* -+ * QCA955X GMAC Interface -+ */ -+ -+#define QCA955X_GMAC_REG_ETH_CFG 0x00 -+ -+#define QCA955X_ETH_CFG_RGMII_EN BIT(0) -+#define QCA955X_ETH_CFG_MII_GE0 BIT(1) -+#define QCA955X_ETH_CFG_GMII_GE0 BIT(2) -+#define QCA955X_ETH_CFG_MII_GE0_MASTER BIT(3) -+#define QCA955X_ETH_CFG_MII_GE0_SLAVE BIT(4) -+#define QCA955X_ETH_CFG_GE0_ERR_EN BIT(5) -+#define QCA955X_ETH_CFG_GE0_SGMII BIT(6) -+#define QCA955X_ETH_CFG_RMII_GE0 BIT(10) -+#define QCA955X_ETH_CFG_MII_CNTL_SPEED BIT(11) -+#define QCA955X_ETH_CFG_RMII_GE0_MASTER BIT(12) -+#define QCA955X_ETH_CFG_RXD_DELAY_MASK 0x3 -+#define QCA955X_ETH_CFG_RXD_DELAY_SHIFT 14 -+#define QCA955X_ETH_CFG_RDV_DELAY BIT(16) -+#define QCA955X_ETH_CFG_RDV_DELAY_MASK 0x3 -+#define QCA955X_ETH_CFG_RDV_DELAY_SHIFT 16 -+#define QCA955X_ETH_CFG_TXD_DELAY_MASK 0x3 -+#define QCA955X_ETH_CFG_TXD_DELAY_SHIFT 18 -+#define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3 -+#define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20 -+ - #endif /* __ASM_MACH_AR71XX_REGS_H */ diff --git a/target/linux/ar71xx/patches-4.14/602-MIPS-ath79-add-openwrt-stuff.patch b/target/linux/ar71xx/patches-4.14/602-MIPS-ath79-add-openwrt-stuff.patch deleted file mode 100644 index 047be0c7fd..0000000000 --- a/target/linux/ar71xx/patches-4.14/602-MIPS-ath79-add-openwrt-stuff.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -99,6 +99,20 @@ config SOC_QCA955X - select PCI_AR724X if PCI - def_bool n - -+config ATH79_DEV_M25P80 -+ select ATH79_DEV_SPI -+ def_bool n -+ -+config ATH79_DEV_AP9X_PCI -+ select ATH79_PCI_ATH9K_FIXUP -+ def_bool n -+ -+config ATH79_DEV_DSA -+ def_bool n -+ -+config ATH79_DEV_ETH -+ def_bool n -+ - config PCI_AR724X - def_bool n - -@@ -108,6 +122,10 @@ config ATH79_DEV_GPIO_BUTTONS - config ATH79_DEV_LEDS_GPIO - def_bool n - -+config ATH79_DEV_NFC -+ depends on (SOC_AR934X || SOC_QCA955X) -+ def_bool n -+ - config ATH79_DEV_SPI - def_bool n - -@@ -118,4 +136,14 @@ config ATH79_DEV_WMAC - depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X) - def_bool n - -+config ATH79_NVRAM -+ def_bool n -+ -+config ATH79_PCI_ATH9K_FIXUP -+ def_bool n -+ -+config ATH79_ROUTERBOOT -+ select LZO_DECOMPRESS -+ def_bool n -+ - endif diff --git a/target/linux/ar71xx/patches-4.14/603-MIPS-ath79-ap121-fixes.patch b/target/linux/ar71xx/patches-4.14/603-MIPS-ath79-ap121-fixes.patch deleted file mode 100644 index 672f38e938..0000000000 --- a/target/linux/ar71xx/patches-4.14/603-MIPS-ath79-ap121-fixes.patch +++ /dev/null @@ -1,149 +0,0 @@ ---- a/arch/mips/ath79/mach-ap121.c -+++ b/arch/mips/ath79/mach-ap121.c -@@ -1,19 +1,21 @@ - /* - * Atheros AP121 board support - * -- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - --#include "machtypes.h" -+#include "dev-eth.h" - #include "dev-gpio-buttons.h" - #include "dev-leds-gpio.h" -+#include "dev-m25p80.h" - #include "dev-spi.h" - #include "dev-usb.h" - #include "dev-wmac.h" -+#include "machtypes.h" - - #define AP121_GPIO_LED_WLAN 0 - #define AP121_GPIO_LED_USB 1 -@@ -24,7 +26,14 @@ - #define AP121_KEYS_POLL_INTERVAL 20 /* msecs */ - #define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL) - --#define AP121_CAL_DATA_ADDR 0x1fff1000 -+#define AP121_MAC0_OFFSET 0x0000 -+#define AP121_MAC1_OFFSET 0x0006 -+#define AP121_CALDATA_OFFSET 0x1000 -+#define AP121_WMAC_MAC_OFFSET 0x1002 -+ -+#define AP121_MINI_GPIO_LED_WLAN 0 -+#define AP121_MINI_GPIO_BTN_JUMPSTART 12 -+#define AP121_MINI_GPIO_BTN_RESET 11 - - static struct gpio_led ap121_leds_gpio[] __initdata = { - { -@@ -58,35 +67,78 @@ static struct gpio_keys_button ap121_gpi - } - }; - --static struct spi_board_info ap121_spi_info[] = { -+static struct gpio_led ap121_mini_leds_gpio[] __initdata = { - { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "mx25l1606e", -- } -+ .name = "ap121:green:wlan", -+ .gpio = AP121_MINI_GPIO_LED_WLAN, -+ .active_low = 0, -+ }, - }; - --static struct ath79_spi_platform_data ap121_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, -+static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = { -+ { -+ .desc = "jumpstart button", -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, -+ .gpio = AP121_MINI_GPIO_BTN_JUMPSTART, -+ .active_low = 1, -+ }, -+ { -+ .desc = "reset button", -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, -+ .gpio = AP121_MINI_GPIO_BTN_RESET, -+ .active_low = 1, -+ } - }; - -+static void __init ap121_common_setup(void) -+{ -+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); -+ -+ ath79_register_m25p80(NULL); -+ ath79_register_wmac(art + AP121_CALDATA_OFFSET, -+ art + AP121_WMAC_MAC_OFFSET); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0); -+ ath79_init_mac(ath79_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0); -+ -+ ath79_register_mdio(0, 0x0); -+ -+ /* LAN ports */ -+ ath79_register_eth(1); -+ -+ /* WAN port */ -+ ath79_register_eth(0); -+} -+ - static void __init ap121_setup(void) - { -- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR); -+ ap121_common_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio), - ap121_leds_gpio); - ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap121_gpio_keys), - ap121_gpio_keys); -- -- ath79_register_spi(&ap121_spi_data, ap121_spi_info, -- ARRAY_SIZE(ap121_spi_info)); - ath79_register_usb(); -- ath79_register_wmac(cal_data, NULL); - } - - MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board", - ap121_setup); -+ -+static void __init ap121_mini_setup(void) -+{ -+ ap121_common_setup(); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio), -+ ap121_mini_leds_gpio); -+ ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ap121_mini_gpio_keys), -+ ap121_mini_gpio_keys); -+} -+ -+MIPS_MACHINE(ATH79_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI", -+ ap121_mini_setup); ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -6,9 +6,10 @@ menu "Atheros AR71XX/AR724X/AR913X machi - config ATH79_MACH_AP121 - bool "Atheros AP121 reference board" - select SOC_AR933X -+ select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -+ select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - help diff --git a/target/linux/ar71xx/patches-4.14/604-MIPS-ath79-no-of.patch b/target/linux/ar71xx/patches-4.14/604-MIPS-ath79-no-of.patch deleted file mode 100644 index 2e7d5d8232..0000000000 --- a/target/linux/ar71xx/patches-4.14/604-MIPS-ath79-no-of.patch +++ /dev/null @@ -1,70 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -203,7 +203,6 @@ config ATH79 - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_MIPS16 - select SYS_SUPPORTS_ZBOOT_UART_PROM -- select USE_OF - help - Support for the Atheros AR71XX/AR724X/AR913X SoCs. - ---- a/arch/mips/ath79/setup.c -+++ b/arch/mips/ath79/setup.c -@@ -190,16 +190,20 @@ unsigned int get_c0_compare_int(void) - - void __init plat_mem_setup(void) - { -+#ifdef CONFIG_OF - unsigned long fdt_start; -+#endif - - set_io_port_base(KSEG1); - -+#ifdef CONFIG_OF - /* Get the position of the FDT passed by the bootloader */ - fdt_start = fw_getenvl("fdt_start"); - if (fdt_start) - __dt_setup_arch((void *)KSEG0ADDR(fdt_start)); - else if (fw_passed_dtb) - __dt_setup_arch((void *)KSEG0ADDR(fw_passed_dtb)); -+#endif - - if (mips_machtype != ATH79_MACH_GENERIC_OF) { - ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE, -@@ -295,17 +299,21 @@ static int __init ath79_setup(void) - - arch_initcall(ath79_setup); - -+#ifdef CONFIG_OF - void __init device_tree_init(void) - { - unflatten_and_copy_device_tree(); - } -+#endif - - MIPS_MACHINE(ATH79_MACH_GENERIC, - "Generic", - "Generic AR71XX/AR724X/AR913X based board", - NULL); - -+#ifdef CONFIG_OF - MIPS_MACHINE(ATH79_MACH_GENERIC_OF, - "DTB", - "Generic AR71XX/AR724X/AR913X based board (DT)", - NULL); -+#endif ---- a/arch/mips/ath79/clock.c -+++ b/arch/mips/ath79/clock.c -@@ -32,10 +32,12 @@ - #define AR724X_BASE_FREQ 40000000 - - static struct clk *clks[ATH79_CLK_END]; -+#ifdef CONFIG_OF - static struct clk_onecell_data clk_data = { - .clks = clks, - .clk_num = ARRAY_SIZE(clks), - }; -+#endif - - static struct clk *__init ath79_add_sys_clkdev( - const char *id, unsigned long rate) diff --git a/target/linux/ar71xx/patches-4.14/605-MIPS-ath79-db120-fixes.patch b/target/linux/ar71xx/patches-4.14/605-MIPS-ath79-db120-fixes.patch deleted file mode 100644 index 44335f2ff7..0000000000 --- a/target/linux/ar71xx/patches-4.14/605-MIPS-ath79-db120-fixes.patch +++ /dev/null @@ -1,204 +0,0 @@ ---- a/arch/mips/ath79/mach-db120.c -+++ b/arch/mips/ath79/mach-db120.c -@@ -2,7 +2,7 @@ - * Atheros DB120 reference board support - * - * Copyright (c) 2011 Qualcomm Atheros -- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above -@@ -19,16 +19,26 @@ - */ - - #include <linux/pci.h> -+#include <linux/phy.h> -+#include <linux/platform_device.h> - #include <linux/ath9k_platform.h> -+#include <linux/ar8216_platform.h> - --#include "machtypes.h" -+#include <asm/mach-ath79/ar71xx_regs.h> -+ -+#include "common.h" -+#include "dev-ap9x-pci.h" -+#include "dev-eth.h" - #include "dev-gpio-buttons.h" - #include "dev-leds-gpio.h" -+#include "dev-m25p80.h" -+#include "dev-nfc.h" - #include "dev-spi.h" - #include "dev-usb.h" - #include "dev-wmac.h" --#include "pci.h" -+#include "machtypes.h" - -+#define DB120_GPIO_LED_USB 11 - #define DB120_GPIO_LED_WLAN_5G 12 - #define DB120_GPIO_LED_WLAN_2G 13 - #define DB120_GPIO_LED_STATUS 14 -@@ -39,8 +49,10 @@ - #define DB120_KEYS_POLL_INTERVAL 20 /* msecs */ - #define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL) - --#define DB120_WMAC_CALDATA_OFFSET 0x1000 --#define DB120_PCIE_CALDATA_OFFSET 0x5000 -+#define DB120_MAC0_OFFSET 0 -+#define DB120_MAC1_OFFSET 6 -+#define DB120_WMAC_CALDATA_OFFSET 0x1000 -+#define DB120_PCIE_CALDATA_OFFSET 0x5000 - - static struct gpio_led db120_leds_gpio[] __initdata = { - { -@@ -63,6 +75,11 @@ static struct gpio_led db120_leds_gpio[] - .gpio = DB120_GPIO_LED_WLAN_2G, - .active_low = 1, - }, -+ { -+ .name = "db120:green:usb", -+ .gpio = DB120_GPIO_LED_USB, -+ .active_low = 1, -+ } - }; - - static struct gpio_keys_button db120_gpio_keys[] __initdata = { -@@ -76,60 +93,85 @@ static struct gpio_keys_button db120_gpi - }, - }; - --static struct spi_board_info db120_spi_info[] = { -- { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "s25sl064a", -- } -+static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = { -+ .mode = AR8327_PAD_MAC_RGMII, -+ .txclk_delay_en = true, -+ .rxclk_delay_en = true, -+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, -+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, - }; - --static struct ath79_spi_platform_data db120_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, -+static struct ar8327_led_cfg db120_ar8327_led_cfg = { -+ .led_ctrl0 = 0x00000000, -+ .led_ctrl1 = 0xc737c737, -+ .led_ctrl2 = 0x00000000, -+ .led_ctrl3 = 0x00c30c00, -+ .open_drain = true, - }; - --#ifdef CONFIG_PCI --static struct ath9k_platform_data db120_ath9k_data; -- --static int db120_pci_plat_dev_init(struct pci_dev *dev) --{ -- switch (PCI_SLOT(dev->devfn)) { -- case 0: -- dev->dev.platform_data = &db120_ath9k_data; -- break; -- } -- -- return 0; --} -- --static void __init db120_pci_init(u8 *eeprom) --{ -- memcpy(db120_ath9k_data.eeprom_data, eeprom, -- sizeof(db120_ath9k_data.eeprom_data)); -+static struct ar8327_platform_data db120_ar8327_data = { -+ .pad0_cfg = &db120_ar8327_pad0_cfg, -+ .port0_cfg = { -+ .force_link = 1, -+ .speed = AR8327_PORT_SPEED_1000, -+ .duplex = 1, -+ .txpause = 1, -+ .rxpause = 1, -+ }, -+ .led_cfg = &db120_ar8327_led_cfg, -+}; - -- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init); -- ath79_register_pci(); --} --#else --static inline void db120_pci_init(u8 *eeprom) {} --#endif /* CONFIG_PCI */ -+static struct mdio_board_info db120_mdio0_info[] = { -+ { -+ .bus_id = "ag71xx-mdio.0", -+ .mdio_addr = 0, -+ .platform_data = &db120_ar8327_data, -+ }, -+}; - - static void __init db120_setup(void) - { - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - -+ ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO); -+ ath79_register_m25p80(NULL); -+ - ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio), - db120_leds_gpio); - ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL, - ARRAY_SIZE(db120_gpio_keys), - db120_gpio_keys); -- ath79_register_spi(&db120_spi_data, db120_spi_info, -- ARRAY_SIZE(db120_spi_info)); - ath79_register_usb(); - ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL); -- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET); -+ ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL); -+ -+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | -+ AR934X_ETH_CFG_SW_ONLY_MODE); -+ -+ ath79_register_mdio(1, 0x0); -+ ath79_register_mdio(0, 0x0); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0); -+ -+ mdiobus_register_board_info(db120_mdio0_info, -+ ARRAY_SIZE(db120_mdio0_info)); -+ -+ /* GMAC0 is connected to an AR8327 switch */ -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth0_data.phy_mask = BIT(0); -+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; -+ ath79_eth0_pll_data.pll_1000 = 0x06000000; -+ ath79_register_eth(0); -+ -+ /* GMAC1 is connected to the internal switch */ -+ ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0); -+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; -+ ath79_eth1_data.speed = SPEED_1000; -+ ath79_eth1_data.duplex = DUPLEX_FULL; -+ -+ ath79_register_eth(1); -+ -+ ath79_register_nfc(); - } - - MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board", ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -43,9 +43,12 @@ config ATH79_MACH_AP81 - config ATH79_MACH_DB120 - bool "Atheros DB120 reference board" - select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_NFC - select ATH79_DEV_USB - select ATH79_DEV_WMAC - help diff --git a/target/linux/ar71xx/patches-4.14/606-MIPS-ath79-pb44-fixes.patch b/target/linux/ar71xx/patches-4.14/606-MIPS-ath79-pb44-fixes.patch deleted file mode 100644 index c9cb7e5c00..0000000000 --- a/target/linux/ar71xx/patches-4.14/606-MIPS-ath79-pb44-fixes.patch +++ /dev/null @@ -1,144 +0,0 @@ ---- a/arch/mips/ath79/mach-pb44.c -+++ b/arch/mips/ath79/mach-pb44.c -@@ -8,23 +8,47 @@ - * by the Free Software Foundation. - */ - -+#include <linux/delay.h> - #include <linux/init.h> - #include <linux/platform_device.h> - #include <linux/i2c.h> - #include <linux/i2c-gpio.h> - #include <linux/platform_data/pcf857x.h> -+#include <linux/spi/flash.h> -+#include <linux/spi/vsc7385.h> - - #include "machtypes.h" -+#include <asm/mach-ath79/ar71xx_regs.h> -+#include <asm/mach-ath79/ath79.h> -+#include "dev-eth.h" - #include "dev-gpio-buttons.h" - #include "dev-leds-gpio.h" - #include "dev-spi.h" - #include "dev-usb.h" -+#include "machtypes.h" - #include "pci.h" - - #define PB44_GPIO_I2C_SCL 0 - #define PB44_GPIO_I2C_SDA 1 - -+#define PB44_PCF8757_VSC7395_CS 0 -+#define PB44_PCF8757_STEREO_CS 1 -+#define PB44_PCF8757_SLIC_CS0 2 -+#define PB44_PCF8757_SLIC_TEST 3 -+#define PB44_PCF8757_SLIC_INT0 4 -+#define PB44_PCF8757_SLIC_INT1 5 -+#define PB44_PCF8757_SW_RESET 6 -+#define PB44_PCF8757_SW_JUMP 8 -+#define PB44_PCF8757_LED_JUMP1 9 -+#define PB44_PCF8757_LED_JUMP2 10 -+#define PB44_PCF8757_TP24 11 -+#define PB44_PCF8757_TP25 12 -+#define PB44_PCF8757_TP26 13 -+#define PB44_PCF8757_TP27 14 -+#define PB44_PCF8757_TP28 15 -+ - #define PB44_GPIO_EXP_BASE 16 -+#define PB44_GPIO_VSC7395_CS (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS) - #define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6) - #define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8) - #define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9) -@@ -87,20 +111,59 @@ static struct gpio_keys_button pb44_gpio - } - }; - -+static void pb44_vsc7395_reset(void) -+{ -+ ath79_device_reset_set(AR71XX_RESET_GE1_PHY); -+ udelay(10); -+ ath79_device_reset_clear(AR71XX_RESET_GE1_PHY); -+ mdelay(50); -+} -+ -+static struct vsc7385_platform_data pb44_vsc7395_data = { -+ .reset = pb44_vsc7395_reset, -+ .ucode_name = "vsc7395_ucode_pb44.bin", -+ .mac_cfg = { -+ .tx_ipg = 6, -+ .bit2 = 1, -+ .clk_sel = 0, -+ }, -+}; -+ -+static const char *pb44_part_probes[] = { -+ "RedBoot", -+ NULL, -+}; -+ -+static struct flash_platform_data pb44_flash_data = { -+ .part_probes = pb44_part_probes, -+}; -+ - static struct spi_board_info pb44_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p64", -+ .platform_data = &pb44_flash_data, - }, -+ { -+ .bus_num = 0, -+ .chip_select = 1, -+ .max_speed_hz = 25000000, -+ .modalias = "spi-vsc7385", -+ .platform_data = &pb44_vsc7395_data, -+ } - }; - - static struct ath79_spi_platform_data pb44_spi_data = { - .bus_num = 0, -- .num_chipselect = 1, -+ .num_chipselect = 2, - }; - -+#define PB44_WAN_PHYMASK BIT(0) -+#define PB44_LAN_PHYMASK 0 -+#define PB44_MDIO_PHYMASK (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK) -+ - static void __init pb44_init(void) - { - i2c_register_board_info(0, pb44_i2c_board_info, -@@ -116,6 +179,22 @@ static void __init pb44_init(void) - ARRAY_SIZE(pb44_spi_info)); - ath79_register_usb(); - ath79_register_pci(); -+ -+ ath79_register_mdio(0, ~PB44_MDIO_PHYMASK); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK; -+ -+ ath79_register_eth(0); -+ -+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); -+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth1_data.speed = SPEED_1000; -+ ath79_eth1_data.duplex = DUPLEX_FULL; -+ ath79_eth1_pll_data.pll_1000 = 0x110000; -+ -+ ath79_register_eth(1); - } - - MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board", ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -58,6 +58,7 @@ config ATH79_MACH_DB120 - config ATH79_MACH_PB44 - bool "Atheros PB44 reference board" - select SOC_AR71XX -+ select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_SPI diff --git a/target/linux/ar71xx/patches-4.14/607-MIPS-ath79-ubnt-xm-fixes.patch b/target/linux/ar71xx/patches-4.14/607-MIPS-ath79-ubnt-xm-fixes.patch deleted file mode 100644 index 4699c82746..0000000000 --- a/target/linux/ar71xx/patches-4.14/607-MIPS-ath79-ubnt-xm-fixes.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -70,9 +70,10 @@ config ATH79_MACH_PB44 - config ATH79_MACH_UBNT_XM - bool "Ubiquiti Networks XM (rev 1.0) board" - select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -+ select ATH79_DEV_M25P80 - help - Say 'Y' here if you want your kernel to support the - Ubiquiti Networks XM (rev 1.0) board. diff --git a/target/linux/ar71xx/patches-4.14/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-4.14/608-MIPS-ath79-ubnt-xm-add-more-boards.patch deleted file mode 100644 index b33db4dd0d..0000000000 --- a/target/linux/ar71xx/patches-4.14/608-MIPS-ath79-ubnt-xm-add-more-boards.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -68,12 +68,16 @@ config ATH79_MACH_PB44 - Atheros PB44 reference board. - - config ATH79_MACH_UBNT_XM -- bool "Ubiquiti Networks XM (rev 1.0) board" -+ bool "Ubiquiti Networks XM/UniFi boards" - select SOC_AR724X -+ select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC - help - Say 'Y' here if you want your kernel to support the - Ubiquiti Networks XM (rev 1.0) board. diff --git a/target/linux/ar71xx/patches-4.14/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-4.14/609-MIPS-ath79-ap136-fixes.patch deleted file mode 100644 index 7f3a242cad..0000000000 --- a/target/linux/ar71xx/patches-4.14/609-MIPS-ath79-ap136-fixes.patch +++ /dev/null @@ -1,300 +0,0 @@ ---- a/arch/mips/ath79/mach-ap136.c -+++ b/arch/mips/ath79/mach-ap136.c -@@ -18,23 +18,29 @@ - * - */ - --#include <linux/pci.h> --#include <linux/ath9k_platform.h> -+#include <linux/platform_device.h> -+#include <linux/ar8216_platform.h> - --#include "machtypes.h" -+#include <asm/mach-ath79/ar71xx_regs.h> -+ -+#include "common.h" -+#include "pci.h" -+#include "dev-ap9x-pci.h" - #include "dev-gpio-buttons.h" -+#include "dev-eth.h" - #include "dev-leds-gpio.h" --#include "dev-spi.h" -+#include "dev-m25p80.h" -+#include "dev-nfc.h" - #include "dev-usb.h" - #include "dev-wmac.h" --#include "pci.h" -+#include "machtypes.h" - --#define AP136_GPIO_LED_STATUS_RED 14 --#define AP136_GPIO_LED_STATUS_GREEN 19 - #define AP136_GPIO_LED_USB 4 --#define AP136_GPIO_LED_WLAN_2G 13 - #define AP136_GPIO_LED_WLAN_5G 12 -+#define AP136_GPIO_LED_WLAN_2G 13 -+#define AP136_GPIO_LED_STATUS_RED 14 - #define AP136_GPIO_LED_WPS_RED 15 -+#define AP136_GPIO_LED_STATUS_GREEN 19 - #define AP136_GPIO_LED_WPS_GREEN 20 - - #define AP136_GPIO_BTN_WPS 16 -@@ -43,37 +49,39 @@ - #define AP136_KEYS_POLL_INTERVAL 20 /* msecs */ - #define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL) - --#define AP136_WMAC_CALDATA_OFFSET 0x1000 --#define AP136_PCIE_CALDATA_OFFSET 0x5000 -+#define AP136_MAC0_OFFSET 0 -+#define AP136_MAC1_OFFSET 6 -+#define AP136_WMAC_CALDATA_OFFSET 0x1000 -+#define AP136_PCIE_CALDATA_OFFSET 0x5000 - - static struct gpio_led ap136_leds_gpio[] __initdata = { - { -- .name = "qca:green:status", -+ .name = "ap136:green:status", - .gpio = AP136_GPIO_LED_STATUS_GREEN, - .active_low = 1, - }, - { -- .name = "qca:red:status", -+ .name = "ap136:red:status", - .gpio = AP136_GPIO_LED_STATUS_RED, - .active_low = 1, - }, - { -- .name = "qca:green:wps", -+ .name = "ap136:green:wps", - .gpio = AP136_GPIO_LED_WPS_GREEN, - .active_low = 1, - }, - { -- .name = "qca:red:wps", -+ .name = "ap136:red:wps", - .gpio = AP136_GPIO_LED_WPS_RED, - .active_low = 1, - }, - { -- .name = "qca:red:wlan-2g", -+ .name = "ap136:red:wlan-2g", - .gpio = AP136_GPIO_LED_WLAN_2G, - .active_low = 1, - }, - { -- .name = "qca:red:usb", -+ .name = "ap136:red:usb", - .gpio = AP136_GPIO_LED_USB, - .active_low = 1, - } -@@ -98,59 +106,151 @@ static struct gpio_keys_button ap136_gpi - }, - }; - --static struct spi_board_info ap136_spi_info[] = { -- { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "mx25l6405d", -- } -+static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg; -+static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg; -+ -+static struct ar8327_platform_data ap136_ar8327_data = { -+ .pad0_cfg = &ap136_ar8327_pad0_cfg, -+ .pad6_cfg = &ap136_ar8327_pad6_cfg, -+ .port0_cfg = { -+ .force_link = 1, -+ .speed = AR8327_PORT_SPEED_1000, -+ .duplex = 1, -+ .txpause = 1, -+ .rxpause = 1, -+ }, -+ .port6_cfg = { -+ .force_link = 1, -+ .speed = AR8327_PORT_SPEED_1000, -+ .duplex = 1, -+ .txpause = 1, -+ .rxpause = 1, -+ }, - }; - --static struct ath79_spi_platform_data ap136_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, -+static struct mdio_board_info ap136_mdio0_info[] = { -+ { -+ .bus_id = "ag71xx-mdio.0", -+ .mdio_addr = 0, -+ .platform_data = &ap136_ar8327_data, -+ }, - }; - --#ifdef CONFIG_PCI --static struct ath9k_platform_data ap136_ath9k_data; -+static void __init ap136_common_setup(void) -+{ -+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); -+ -+ ath79_register_m25p80(NULL); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), -+ ap136_leds_gpio); -+ ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ap136_gpio_keys), -+ ap136_gpio_keys); -+ -+ ath79_register_usb(); -+ ath79_register_nfc(); -+ -+ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL); -+ -+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - --static int ap136_pci_plat_dev_init(struct pci_dev *dev) -+ ath79_register_mdio(0, 0x0); -+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0); -+ -+ mdiobus_register_board_info(ap136_mdio0_info, -+ ARRAY_SIZE(ap136_mdio0_info)); -+ -+ /* GMAC0 is connected to the RMGII interface */ -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth0_data.phy_mask = BIT(0); -+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; -+ -+ ath79_register_eth(0); -+ -+ /* GMAC1 is connected tot eh SGMII interface */ -+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; -+ ath79_eth1_data.speed = SPEED_1000; -+ ath79_eth1_data.duplex = DUPLEX_FULL; -+ -+ ath79_register_eth(1); -+} -+ -+static void __init ap136_010_setup(void) - { -- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0) -- dev->dev.platform_data = &ap136_ath9k_data; -+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - -- return 0; -+ /* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */ -+ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII; -+ ap136_ar8327_pad0_cfg.txclk_delay_en = true; -+ ap136_ar8327_pad0_cfg.rxclk_delay_en = true; -+ ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; -+ ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; -+ -+ /* GMAC6 of the AR8327 switch is connected to GMAC1 via SGMII */ -+ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII; -+ ap136_ar8327_pad6_cfg.rxclk_delay_en = true; -+ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0; -+ -+ ath79_eth0_pll_data.pll_1000 = 0xa6000000; -+ ath79_eth1_pll_data.pll_1000 = 0x03000101; -+ -+ ap136_common_setup(); -+ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL); - } - --static void __init ap136_pci_init(u8 *eeprom) -+MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", -+ "Atheros AP136-010 reference board", -+ ap136_010_setup); -+ -+static void __init ap136_020_common_setup(void) - { -- memcpy(ap136_ath9k_data.eeprom_data, eeprom, -- sizeof(ap136_ath9k_data.eeprom_data)); -+ /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */ -+ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII; -+ ap136_ar8327_pad0_cfg.sgmii_delay_en = true; -+ -+ /* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */ -+ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII; -+ ap136_ar8327_pad6_cfg.txclk_delay_en = true; -+ ap136_ar8327_pad6_cfg.rxclk_delay_en = true; -+ ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; -+ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; - -- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init); -- ath79_register_pci(); -+ ath79_eth0_pll_data.pll_1000 = 0x56000000; -+ ath79_eth1_pll_data.pll_1000 = 0x03000101; -+ -+ ap136_common_setup(); - } --#else --static inline void ap136_pci_init(u8 *eeprom) {} --#endif /* CONFIG_PCI */ - --static void __init ap136_setup(void) -+static void __init ap136_020_setup(void) - { - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - -- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), -- ap136_leds_gpio); -- ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, -- ARRAY_SIZE(ap136_gpio_keys), -- ap136_gpio_keys); -- ath79_register_spi(&ap136_spi_data, ap136_spi_info, -- ARRAY_SIZE(ap136_spi_info)); -- ath79_register_usb(); -- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET); -- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET); -+ ap136_020_common_setup(); -+ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL); - } - --MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", -- "Atheros AP136-010 reference board", -- ap136_setup); -+MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020", -+ "Atheros AP136-020 reference board", -+ ap136_020_setup); -+ -+/* -+ * AP135-020 is similar to AP136-020, any future AP135 specific init -+ * code can be added here. -+ */ -+static void __init ap135_020_setup(void) -+{ -+ ap136_leds_gpio[0].name = "ap135:green:status"; -+ ap136_leds_gpio[1].name = "ap135:red:status"; -+ ap136_leds_gpio[2].name = "ap135:green:wps"; -+ ap136_leds_gpio[3].name = "ap135:red:wps"; -+ ap136_leds_gpio[4].name = "ap135:red:wlan-2g"; -+ ap136_leds_gpio[5].name = "ap135:red:usb"; -+ -+ ap136_020_common_setup(); -+ ath79_register_pci(); -+} -+ -+MIPS_MACHINE(ATH79_MACH_AP135_020, "AP135-020", -+ "Atheros AP135-020 reference board", -+ ap135_020_setup); ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -17,16 +17,17 @@ config ATH79_MACH_AP121 - Atheros AP121 reference board. - - config ATH79_MACH_AP136 -- bool "Atheros AP136 reference board" -+ bool "Atheros AP136/AP135 reference board" - select SOC_QCA955X - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_NFC - select ATH79_DEV_SPI - select ATH79_DEV_USB - select ATH79_DEV_WMAC - help - Say 'Y' here if you want your kernel to support the -- Atheros AP136 reference board. -+ Atheros AP136 or AP135 reference boards. - - config ATH79_MACH_AP81 - bool "Atheros AP81 reference board" diff --git a/target/linux/ar71xx/patches-4.14/611-MIPS-ath79-wdt-timeout.patch b/target/linux/ar71xx/patches-4.14/611-MIPS-ath79-wdt-timeout.patch deleted file mode 100644 index 0927d5a977..0000000000 --- a/target/linux/ar71xx/patches-4.14/611-MIPS-ath79-wdt-timeout.patch +++ /dev/null @@ -1,25 +0,0 @@ -MIPS: ath79: fix maximum timeout - -If the userland tries to set a timeout higher than the max_timeout, then we should fallback to max_timeout. - -Signed-off-by: John Crispin <blogic@openwrt.org> - ---- a/drivers/watchdog/ath79_wdt.c -+++ b/drivers/watchdog/ath79_wdt.c -@@ -115,10 +115,14 @@ static inline void ath79_wdt_disable(voi - - static int ath79_wdt_set_timeout(int val) - { -- if (val < 1 || val > max_timeout) -+ if (val < 1) - return -EINVAL; - -- timeout = val; -+ if (val > max_timeout) -+ timeout = max_timeout; -+ else -+ timeout = val; -+ - ath79_wdt_keepalive(); - - return 0; diff --git a/target/linux/ar71xx/patches-4.14/612-MIPS-ath79-set-buffalo-txgain.patch b/target/linux/ar71xx/patches-4.14/612-MIPS-ath79-set-buffalo-txgain.patch deleted file mode 100644 index 3d100e0549..0000000000 --- a/target/linux/ar71xx/patches-4.14/612-MIPS-ath79-set-buffalo-txgain.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -319,6 +319,11 @@ void __init ath79_wmac_disable_5ghz(void - ath79_wmac_data.disable_5ghz = true; - } - -+void __init ath79_wmac_set_tx_gain_buffalo(void) -+{ -+ ath79_wmac_data.tx_gain_buffalo = true; -+} -+ - void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) - { - if (soc_is_ar913x()) ---- a/arch/mips/ath79/dev-wmac.h -+++ b/arch/mips/ath79/dev-wmac.h -@@ -16,6 +16,7 @@ void ath79_register_wmac(u8 *cal_data, u - void ath79_register_wmac_simple(void); - void ath79_wmac_disable_2ghz(void); - void ath79_wmac_disable_5ghz(void); -+void ath79_wmac_set_tx_gain_buffalo(void); - - bool ar93xx_wmac_read_mac_address(u8 *dest); - diff --git a/target/linux/ar71xx/patches-4.14/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch b/target/linux/ar71xx/patches-4.14/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch deleted file mode 100644 index 5c1205d59f..0000000000 --- a/target/linux/ar71xx/patches-4.14/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch +++ /dev/null @@ -1,76 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -18,9 +18,11 @@ - #include <linux/etherdevice.h> - #include <linux/platform_device.h> - #include <linux/ath9k_platform.h> -+#include <linux/gpio.h> - - #include <asm/mach-ath79/ath79.h> - #include <asm/mach-ath79/ar71xx_regs.h> -+#include "common.h" - #include "dev-wmac.h" - - static u8 ath79_wmac_mac[ETH_ALEN]; -@@ -324,6 +326,51 @@ void __init ath79_wmac_set_tx_gain_buffa - ath79_wmac_data.tx_gain_buffalo = true; - } - -+static int ath79_request_ext_lna_gpio(unsigned chain, int gpio) -+{ -+ char *label; -+ int err; -+ -+ label = kasprintf(GFP_KERNEL, "external LNA%u", chain); -+ if (!label) -+ return -ENOMEM; -+ -+ err = gpio_request_one(gpio, GPIOF_DIR_OUT | GPIOF_INIT_LOW, label); -+ if (err) { -+ pr_err("unable to request GPIO%d for external LNA%u\n", -+ gpio, chain); -+ kfree(label); -+ } -+ -+ return err; -+} -+ -+static void ar934x_set_ext_lna_gpio(unsigned chain, int gpio) -+{ -+ unsigned int sel; -+ int err; -+ -+ if (WARN_ON(chain > 1)) -+ return; -+ -+ err = ath79_request_ext_lna_gpio(chain, gpio); -+ if (err) -+ return; -+ -+ if (chain == 0) -+ sel = AR934X_GPIO_OUT_EXT_LNA0; -+ else -+ sel = AR934X_GPIO_OUT_EXT_LNA1; -+ -+ ath79_gpio_output_select(gpio, sel); -+} -+ -+void __init ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio) -+{ -+ if (soc_is_ar934x()) -+ ar934x_set_ext_lna_gpio(chain, gpio); -+} -+ - void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) - { - if (soc_is_ar913x()) ---- a/arch/mips/ath79/dev-wmac.h -+++ b/arch/mips/ath79/dev-wmac.h -@@ -17,6 +17,7 @@ void ath79_register_wmac_simple(void); - void ath79_wmac_disable_2ghz(void); - void ath79_wmac_disable_5ghz(void); - void ath79_wmac_set_tx_gain_buffalo(void); -+void ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio); - - bool ar93xx_wmac_read_mac_address(u8 *dest); - diff --git a/target/linux/ar71xx/patches-4.14/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch b/target/linux/ar71xx/patches-4.14/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch deleted file mode 100644 index 722d127ec5..0000000000 --- a/target/linux/ar71xx/patches-4.14/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch +++ /dev/null @@ -1,696 +0,0 @@ -From 5300a7cd7ed2f88488ddba62947b9c6bb9663777 Mon Sep 17 00:00:00 2001 -Message-Id: <5300a7cd7ed2f88488ddba62947b9c6bb9663777.1396122227.git.mschiffer@universe-factory.net> -From: Matthias Schiffer <mschiffer@universe-factory.net> -Date: Sat, 29 Mar 2014 20:26:08 +0100 -Subject: [PATCH 1/2] MIPS: ath79: add support for QCA953x SoC - -Note that the clock calculation looks very similar to the QCA955x, but the -meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed. ---- - arch/mips/ath79/Kconfig | 6 +- - arch/mips/ath79/clock.c | 78 ++++++++++++++++++++++++++ - arch/mips/ath79/common.c | 4 ++ - arch/mips/ath79/dev-common.c | 1 + - arch/mips/ath79/dev-wmac.c | 20 +++++++ - arch/mips/ath79/early_printk.c | 1 + - arch/mips/ath79/gpio.c | 4 +- - arch/mips/ath79/irq.c | 4 ++ - arch/mips/ath79/setup.c | 8 ++- - arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 48 ++++++++++++++++ - arch/mips/include/asm/mach-ath79/ath79.h | 11 ++++ - 11 files changed, 182 insertions(+), 3 deletions(-) - ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -105,6 +105,10 @@ config SOC_AR934X - select PCI_AR724X if PCI - def_bool n - -+config SOC_QCA953X -+ select USB_ARCH_HAS_EHCI -+ def_bool n -+ - config SOC_QCA955X - select HW_HAS_PCI - select PCI_AR724X if PCI -@@ -144,7 +148,7 @@ config ATH79_DEV_USB - def_bool n - - config ATH79_DEV_WMAC -- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X) -+ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X) - def_bool n - - config ATH79_NVRAM ---- a/arch/mips/ath79/clock.c -+++ b/arch/mips/ath79/clock.c -@@ -357,6 +357,87 @@ static void __init ar934x_clocks_init(vo - iounmap(dpll_base); - } - -+static void __init qca953x_clocks_init(void) -+{ -+ unsigned long ref_rate; -+ unsigned long cpu_rate; -+ unsigned long ddr_rate; -+ unsigned long ahb_rate; -+ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv; -+ u32 cpu_pll, ddr_pll; -+ -+ /* QCA953X only supports 25MHz ref_clk */ -+ ref_rate = 25 * 1000 * 1000; -+ -+ pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG); -+ out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & -+ QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK; -+ ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) & -+ QCA953X_PLL_CPU_CONFIG_REFDIV_MASK; -+ nint = (pll >> QCA953X_PLL_CPU_CONFIG_NINT_SHIFT) & -+ QCA953X_PLL_CPU_CONFIG_NINT_MASK; -+ frac = (pll >> QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT) & -+ QCA953X_PLL_CPU_CONFIG_NFRAC_MASK; -+ -+ cpu_pll = nint * ref_rate / ref_div; -+ cpu_pll += frac * (ref_rate >> 6) / ref_div; -+ cpu_pll /= (1 << out_div); -+ -+ pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG); -+ out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & -+ QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK; -+ ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) & -+ QCA953X_PLL_DDR_CONFIG_REFDIV_MASK; -+ nint = (pll >> QCA953X_PLL_DDR_CONFIG_NINT_SHIFT) & -+ QCA953X_PLL_DDR_CONFIG_NINT_MASK; -+ frac = (pll >> QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT) & -+ QCA953X_PLL_DDR_CONFIG_NFRAC_MASK; -+ -+ ddr_pll = nint * ref_rate / ref_div; -+ ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4); -+ ddr_pll /= (1 << out_div); -+ -+ clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG); -+ -+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & -+ QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; -+ -+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS) -+ cpu_rate = ref_rate; -+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL) -+ cpu_rate = cpu_pll / (postdiv + 1); -+ else -+ cpu_rate = ddr_pll / (postdiv + 1); -+ -+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) & -+ QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK; -+ -+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS) -+ ddr_rate = ref_rate; -+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL) -+ ddr_rate = ddr_pll / (postdiv + 1); -+ else -+ ddr_rate = cpu_pll / (postdiv + 1); -+ -+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) & -+ QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK; -+ -+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS) -+ ahb_rate = ref_rate; -+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL) -+ ahb_rate = ddr_pll / (postdiv + 1); -+ else -+ ahb_rate = cpu_pll / (postdiv + 1); -+ -+ ath79_add_sys_clkdev("ref", ref_rate); -+ ath79_add_sys_clkdev("cpu", cpu_rate); -+ ath79_add_sys_clkdev("ddr", ddr_rate); -+ ath79_add_sys_clkdev("ahb", ahb_rate); -+ -+ clk_add_alias("wdt", NULL, "ref", NULL); -+ clk_add_alias("uart", NULL, "ref", NULL); -+} -+ - static void __init qca955x_clocks_init(void) - { - unsigned long ref_rate; -@@ -452,6 +533,8 @@ void __init ath79_clocks_init(void) - ar933x_clocks_init(); - else if (soc_is_ar934x()) - ar934x_clocks_init(); -+ else if (soc_is_qca953x()) -+ qca953x_clocks_init(); - else if (soc_is_qca955x()) - qca955x_clocks_init(); - else ---- a/arch/mips/ath79/common.c -+++ b/arch/mips/ath79/common.c -@@ -103,6 +103,8 @@ void ath79_device_reset_set(u32 mask) - reg = AR933X_RESET_REG_RESET_MODULE; - else if (soc_is_ar934x()) - reg = AR934X_RESET_REG_RESET_MODULE; -+ else if (soc_is_qca953x()) -+ reg = QCA953X_RESET_REG_RESET_MODULE; - else if (soc_is_qca955x()) - reg = QCA955X_RESET_REG_RESET_MODULE; - else -@@ -131,6 +133,8 @@ void ath79_device_reset_clear(u32 mask) - reg = AR933X_RESET_REG_RESET_MODULE; - else if (soc_is_ar934x()) - reg = AR934X_RESET_REG_RESET_MODULE; -+ else if (soc_is_qca953x()) -+ reg = QCA953X_RESET_REG_RESET_MODULE; - else if (soc_is_qca955x()) - reg = QCA955X_RESET_REG_RESET_MODULE; - else ---- a/arch/mips/ath79/dev-common.c -+++ b/arch/mips/ath79/dev-common.c -@@ -94,6 +94,7 @@ void __init ath79_register_uart(void) - soc_is_ar724x() || - soc_is_ar913x() || - soc_is_ar934x() || -+ soc_is_qca953x() || - soc_is_qca955x()) { - ath79_uart_data[0].uartclk = uart_clk_rate; - platform_device_register(&ath79_uart_device); -@@ -157,6 +158,9 @@ void __init ath79_gpio_init(void) - } else if (soc_is_ar934x()) { - ath79_gpio_pdata.ngpios = AR934X_GPIO_COUNT; - ath79_gpio_pdata.oe_inverted = 1; -+ } else if (soc_is_qca953x()) { -+ ath79_gpio_pdata.ngpios = QCA953X_GPIO_COUNT; -+ ath79_gpio_pdata.oe_inverted = 1; - } else if (soc_is_qca955x()) { - ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT; - ath79_gpio_pdata.oe_inverted = 1; ---- a/arch/mips/ath79/dev-usb.c -+++ b/arch/mips/ath79/dev-usb.c -@@ -236,6 +236,30 @@ static void __init ar934x_usb_setup(void - &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); - } - -+static void __init qca953x_usb_setup(void) -+{ -+ u32 bootstrap; -+ -+ bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP); -+ -+ ath79_device_reset_set(QCA953X_RESET_USBSUS_OVERRIDE); -+ udelay(1000); -+ -+ ath79_device_reset_clear(QCA953X_RESET_USB_PHY); -+ udelay(1000); -+ -+ ath79_device_reset_clear(QCA953X_RESET_USB_PHY_ANALOG); -+ udelay(1000); -+ -+ ath79_device_reset_clear(QCA953X_RESET_USB_HOST); -+ udelay(1000); -+ -+ ath79_usb_register("ehci-platform", -1, -+ QCA953X_EHCI_BASE, QCA953X_EHCI_SIZE, -+ ATH79_CPU_IRQ(3), -+ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); -+} -+ - static void qca955x_usb_reset_notifier(struct platform_device *pdev) - { - u32 base; -@@ -286,6 +310,8 @@ void __init ath79_register_usb(void) - ar933x_usb_setup(); - else if (soc_is_ar934x()) - ar934x_usb_setup(); -+ else if (soc_is_qca953x()) -+ qca953x_usb_setup(); - else if (soc_is_qca955x()) - qca955x_usb_setup(); - else ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -100,7 +100,7 @@ static int ar933x_wmac_reset(void) - return -ETIMEDOUT; - } - --static int ar933x_r1_get_wmac_revision(void) -+static int ar93xx_get_soc_revision(void) - { - return ath79_soc_rev; - } -@@ -125,7 +125,7 @@ static void __init ar933x_wmac_setup(voi - ath79_wmac_data.is_clk_25mhz = true; - - if (ath79_soc_rev == 1) -- ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision; -+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision; - - ath79_wmac_data.external_reset = ar933x_wmac_reset; - } -@@ -150,6 +150,21 @@ static void ar934x_wmac_setup(void) - ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision; - } - -+static void qca953x_wmac_setup(void) -+{ -+ ath79_wmac_device.name = "qca953x_wmac"; -+ -+ ath79_wmac_resources[0].start = QCA953X_WMAC_BASE; -+ ath79_wmac_resources[0].end = QCA953X_WMAC_BASE + QCA953X_WMAC_SIZE - 1; -+ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1); -+ ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1); -+ -+ /* QCA953X only supports 25MHz ref_clk */ -+ ath79_wmac_data.is_clk_25mhz = true; -+ -+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision; -+} -+ - static void qca955x_wmac_setup(void) - { - u32 t; -@@ -379,6 +394,8 @@ void __init ath79_register_wmac(u8 *cal_ - ar933x_wmac_setup(); - else if (soc_is_ar934x()) - ar934x_wmac_setup(); -+ else if (soc_is_qca953x()) -+ qca953x_wmac_setup(); - else if (soc_is_qca955x()) - qca955x_wmac_setup(); - else ---- a/arch/mips/ath79/early_printk.c -+++ b/arch/mips/ath79/early_printk.c -@@ -116,6 +116,8 @@ static void prom_putchar_init(void) - case REV_ID_MAJOR_AR9341: - case REV_ID_MAJOR_AR9342: - case REV_ID_MAJOR_AR9344: -+ case REV_ID_MAJOR_QCA9533: -+ case REV_ID_MAJOR_QCA9533_V2: - case REV_ID_MAJOR_QCA9556: - case REV_ID_MAJOR_QCA9558: - _prom_putchar = prom_putchar_ar71xx; ---- a/arch/mips/ath79/gpio.c -+++ b/arch/mips/ath79/gpio.c -@@ -31,7 +31,7 @@ static void __iomem *ath79_gpio_get_func - soc_is_ar913x() || - soc_is_ar933x()) - reg = AR71XX_GPIO_REG_FUNC; -- else if (soc_is_ar934x()) -+ else if (soc_is_ar934x() || soc_is_qca953x()) - reg = AR934X_GPIO_REG_FUNC; - else - BUG(); -@@ -64,7 +64,7 @@ void __init ath79_gpio_output_select(uns - unsigned int reg; - u32 t, s; - -- BUG_ON(!soc_is_ar934x()); -+ BUG_ON(!soc_is_ar934x() && !soc_is_qca953x()); - - if (gpio >= AR934X_GPIO_COUNT) - return; ---- a/arch/mips/ath79/irq.c -+++ b/arch/mips/ath79/irq.c -@@ -62,6 +62,34 @@ static void ar934x_ip2_irq_init(void) - irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch); - } - -+static void qca953x_ip2_irq_dispatch(struct irq_desc *desc) -+{ -+ u32 status; -+ -+ status = ath79_reset_rr(QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS); -+ -+ if (status & QCA953X_PCIE_WMAC_INT_PCIE_ALL) { -+ ath79_ddr_wb_flush(3); -+ generic_handle_irq(ATH79_IP2_IRQ(0)); -+ } else if (status & QCA953X_PCIE_WMAC_INT_WMAC_ALL) { -+ ath79_ddr_wb_flush(4); -+ generic_handle_irq(ATH79_IP2_IRQ(1)); -+ } else { -+ spurious_interrupt(); -+ } -+} -+ -+static void qca953x_irq_init(void) -+{ -+ int i; -+ -+ for (i = ATH79_IP2_IRQ_BASE; -+ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) -+ irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq); -+ -+ irq_set_chained_handler(ATH79_CPU_IRQ(2), qca953x_ip2_irq_dispatch); -+} -+ - static void qca955x_ip2_irq_dispatch(struct irq_desc *desc) - { - u32 status; -@@ -149,7 +177,7 @@ void __init arch_init_irq(void) - soc_is_ar913x() || soc_is_ar933x()) { - irq_wb_chan2 = 3; - irq_wb_chan3 = 2; -- } else if (soc_is_ar934x()) { -+ } else if (soc_is_ar934x() || soc_is_qca953x()) { - irq_wb_chan3 = 2; - } - -@@ -160,6 +188,7 @@ void __init arch_init_irq(void) - else if (soc_is_ar724x() || - soc_is_ar933x() || - soc_is_ar934x() || -+ soc_is_qca953x() || - soc_is_qca955x()) - misc_is_ar71xx = false; - else -@@ -170,6 +199,8 @@ void __init arch_init_irq(void) - - if (soc_is_ar934x()) - ar934x_ip2_irq_init(); -+ else if (soc_is_qca953x()) -+ qca953x_irq_init(); - else if (soc_is_qca955x()) - qca955x_irq_init(); - } ---- a/arch/mips/ath79/setup.c -+++ b/arch/mips/ath79/setup.c -@@ -60,6 +60,7 @@ static void __init ath79_detect_sys_type - u32 major; - u32 minor; - u32 rev = 0; -+ u32 ver = 1; - - id = ath79_reset_rr(AR71XX_RESET_REG_REV_ID); - major = id & REV_ID_MAJOR_MASK; -@@ -152,6 +153,17 @@ static void __init ath79_detect_sys_type - rev = id & AR934X_REV_ID_REVISION_MASK; - break; - -+ case REV_ID_MAJOR_QCA9533_V2: -+ ver = 2; -+ ath79_soc_rev = 2; -+ /* drop through */ -+ -+ case REV_ID_MAJOR_QCA9533: -+ ath79_soc = ATH79_SOC_QCA9533; -+ chip = "9533"; -+ rev = id & QCA953X_REV_ID_REVISION_MASK; -+ break; -+ - case REV_ID_MAJOR_QCA9556: - ath79_soc = ATH79_SOC_QCA9556; - chip = "9556"; -@@ -168,11 +180,12 @@ static void __init ath79_detect_sys_type - panic("ath79: unknown SoC, id:0x%08x", id); - } - -- ath79_soc_rev = rev; -+ if (ver == 1) -+ ath79_soc_rev = rev; - -- if (soc_is_qca955x()) -- sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u", -- chip, rev); -+ if (soc_is_qca953x() || soc_is_qca955x()) -+ sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s ver %u rev %u", -+ chip, ver, rev); - else - sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev); - pr_info("SoC: %s\n", ath79_sys_type); ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -105,6 +105,21 @@ - #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000) - #define AR934X_SRIF_SIZE 0x1000 - -+#define QCA953X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -+#define QCA953X_GMAC_SIZE 0x14 -+#define QCA953X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) -+#define QCA953X_WMAC_SIZE 0x20000 -+#define QCA953X_EHCI_BASE 0x1b000000 -+#define QCA953X_EHCI_SIZE 0x200 -+#define QCA953X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000) -+#define QCA953X_SRIF_SIZE 0x1000 -+ -+#define QCA953X_PCI_CFG_BASE0 0x14000000 -+#define QCA953X_PCI_CTRL_BASE0 (AR71XX_APB_BASE + 0x000f0000) -+#define QCA953X_PCI_CRP_BASE0 (AR71XX_APB_BASE + 0x000c0000) -+#define QCA953X_PCI_MEM_BASE0 0x10000000 -+#define QCA953X_PCI_MEM_SIZE 0x02000000 -+ - #define QCA955X_PCI_MEM_BASE0 0x10000000 - #define QCA955X_PCI_MEM_BASE1 0x12000000 - #define QCA955X_PCI_MEM_SIZE 0x02000000 -@@ -180,6 +195,12 @@ - #define AR934X_OTP_INTF3_ADDRESS 0x3100c - #define AR934X_OTP_PGENB_SETUP_HOLD_TIME_ADDRESS 0x31034 - -+#define QCA953X_DDR_REG_FLUSH_GE0 0x9c -+#define QCA953X_DDR_REG_FLUSH_GE1 0xa0 -+#define QCA953X_DDR_REG_FLUSH_USB 0xa4 -+#define QCA953X_DDR_REG_FLUSH_PCIE 0xa8 -+#define QCA953X_DDR_REG_FLUSH_WMAC 0xac -+ - /* - * PLL block - */ -@@ -289,6 +310,44 @@ - - #define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6) - -+#define QCA953X_PLL_CPU_CONFIG_REG 0x00 -+#define QCA953X_PLL_DDR_CONFIG_REG 0x04 -+#define QCA953X_PLL_CLK_CTRL_REG 0x08 -+#define QCA953X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24 -+#define QCA953X_PLL_ETH_XMII_CONTROL_REG 0x2c -+#define QCA953X_PLL_ETH_SGMII_CONTROL_REG 0x48 -+ -+#define QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 -+#define QCA953X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -+#define QCA953X_PLL_CPU_CONFIG_NINT_SHIFT 6 -+#define QCA953X_PLL_CPU_CONFIG_NINT_MASK 0x3f -+#define QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 -+#define QCA953X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f -+#define QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 -+#define QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7 -+ -+#define QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT 0 -+#define QCA953X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff -+#define QCA953X_PLL_DDR_CONFIG_NINT_SHIFT 10 -+#define QCA953X_PLL_DDR_CONFIG_NINT_MASK 0x3f -+#define QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 -+#define QCA953X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f -+#define QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 -+#define QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 -+ -+#define QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2) -+#define QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3) -+#define QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4) -+#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5 -+#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f -+#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10 -+#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f -+#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15 -+#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f -+#define QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20) -+#define QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) -+#define QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) -+ - #define QCA955X_PLL_CPU_CONFIG_REG 0x00 - #define QCA955X_PLL_DDR_CONFIG_REG 0x04 - #define QCA955X_PLL_CLK_CTRL_REG 0x08 -@@ -365,6 +424,10 @@ - #define AR934X_RESET_REG_BOOTSTRAP 0xb0 - #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac - -+#define QCA953X_RESET_REG_RESET_MODULE 0x1c -+#define QCA953X_RESET_REG_BOOTSTRAP 0xb0 -+#define QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac -+ - #define QCA955X_RESET_REG_RESET_MODULE 0x1c - #define QCA955X_RESET_REG_BOOTSTRAP 0xb0 - #define QCA955X_RESET_REG_EXT_INT_STATUS 0xac -@@ -460,6 +523,27 @@ - #define AR934X_RESET_MBOX BIT(1) - #define AR934X_RESET_I2S BIT(0) - -+#define QCA953X_RESET_USB_EXT_PWR BIT(29) -+#define QCA953X_RESET_EXTERNAL BIT(28) -+#define QCA953X_RESET_RTC BIT(27) -+#define QCA953X_RESET_FULL_CHIP BIT(24) -+#define QCA953X_RESET_GE1_MDIO BIT(23) -+#define QCA953X_RESET_GE0_MDIO BIT(22) -+#define QCA953X_RESET_CPU_NMI BIT(21) -+#define QCA953X_RESET_CPU_COLD BIT(20) -+#define QCA953X_RESET_DDR BIT(16) -+#define QCA953X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) -+#define QCA953X_RESET_GE1_MAC BIT(13) -+#define QCA953X_RESET_ETH_SWITCH_ANALOG BIT(12) -+#define QCA953X_RESET_USB_PHY_ANALOG BIT(11) -+#define QCA953X_RESET_GE0_MAC BIT(9) -+#define QCA953X_RESET_ETH_SWITCH BIT(8) -+#define QCA953X_RESET_PCIE_PHY BIT(7) -+#define QCA953X_RESET_PCIE BIT(6) -+#define QCA953X_RESET_USB_HOST BIT(5) -+#define QCA953X_RESET_USB_PHY BIT(4) -+#define QCA953X_RESET_USBSUS_OVERRIDE BIT(3) -+ - #define QCA955X_RESET_HOST BIT(31) - #define QCA955X_RESET_SLIC BIT(30) - #define QCA955X_RESET_HDMA BIT(29) -@@ -513,6 +597,13 @@ - #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1) - #define AR934X_BOOTSTRAP_DDR1 BIT(0) - -+#define QCA953X_BOOTSTRAP_SW_OPTION2 BIT(12) -+#define QCA953X_BOOTSTRAP_SW_OPTION1 BIT(11) -+#define QCA953X_BOOTSTRAP_EJTAG_MODE BIT(5) -+#define QCA953X_BOOTSTRAP_REF_CLK BIT(4) -+#define QCA953X_BOOTSTRAP_SDRAM_DISABLED BIT(1) -+#define QCA953X_BOOTSTRAP_DDR1 BIT(0) -+ - #define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4) - - #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) -@@ -533,6 +624,24 @@ - AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \ - AR934X_PCIE_WMAC_INT_PCIE_RC3) - -+#define QCA953X_PCIE_WMAC_INT_WMAC_MISC BIT(0) -+#define QCA953X_PCIE_WMAC_INT_WMAC_TX BIT(1) -+#define QCA953X_PCIE_WMAC_INT_WMAC_RXLP BIT(2) -+#define QCA953X_PCIE_WMAC_INT_WMAC_RXHP BIT(3) -+#define QCA953X_PCIE_WMAC_INT_PCIE_RC BIT(4) -+#define QCA953X_PCIE_WMAC_INT_PCIE_RC0 BIT(5) -+#define QCA953X_PCIE_WMAC_INT_PCIE_RC1 BIT(6) -+#define QCA953X_PCIE_WMAC_INT_PCIE_RC2 BIT(7) -+#define QCA953X_PCIE_WMAC_INT_PCIE_RC3 BIT(8) -+#define QCA953X_PCIE_WMAC_INT_WMAC_ALL \ -+ (QCA953X_PCIE_WMAC_INT_WMAC_MISC | QCA953X_PCIE_WMAC_INT_WMAC_TX | \ -+ QCA953X_PCIE_WMAC_INT_WMAC_RXLP | QCA953X_PCIE_WMAC_INT_WMAC_RXHP) -+ -+#define QCA953X_PCIE_WMAC_INT_PCIE_ALL \ -+ (QCA953X_PCIE_WMAC_INT_PCIE_RC | QCA953X_PCIE_WMAC_INT_PCIE_RC0 | \ -+ QCA953X_PCIE_WMAC_INT_PCIE_RC1 | QCA953X_PCIE_WMAC_INT_PCIE_RC2 | \ -+ QCA953X_PCIE_WMAC_INT_PCIE_RC3) -+ - #define QCA955X_EXT_INT_WMAC_MISC BIT(0) - #define QCA955X_EXT_INT_WMAC_TX BIT(1) - #define QCA955X_EXT_INT_WMAC_RXLP BIT(2) -@@ -575,6 +684,8 @@ - #define REV_ID_MAJOR_AR9341 0x0120 - #define REV_ID_MAJOR_AR9342 0x1120 - #define REV_ID_MAJOR_AR9344 0x2120 -+#define REV_ID_MAJOR_QCA9533 0x0140 -+#define REV_ID_MAJOR_QCA9533_V2 0x0160 - #define REV_ID_MAJOR_QCA9556 0x0130 - #define REV_ID_MAJOR_QCA9558 0x1130 - -@@ -597,6 +708,8 @@ - - #define AR934X_REV_ID_REVISION_MASK 0xf - -+#define QCA953X_REV_ID_REVISION_MASK 0xf -+ - #define QCA955X_REV_ID_REVISION_MASK 0xf - - /* -@@ -644,6 +757,25 @@ - #define AR934X_GPIO_REG_OUT_FUNC5 0x40 - #define AR934X_GPIO_REG_FUNC 0x6c - -+#define QCA953X_GPIO_REG_OUT_FUNC0 0x2c -+#define QCA953X_GPIO_REG_OUT_FUNC1 0x30 -+#define QCA953X_GPIO_REG_OUT_FUNC2 0x34 -+#define QCA953X_GPIO_REG_OUT_FUNC3 0x38 -+#define QCA953X_GPIO_REG_OUT_FUNC4 0x3c -+#define QCA953X_GPIO_REG_IN_ENABLE0 0x44 -+#define QCA953X_GPIO_REG_FUNC 0x6c -+ -+#define QCA953X_GPIO_OUT_MUX_SPI_CS1 10 -+#define QCA953X_GPIO_OUT_MUX_SPI_CS2 11 -+#define QCA953X_GPIO_OUT_MUX_SPI_CS0 9 -+#define QCA953X_GPIO_OUT_MUX_SPI_CLK 8 -+#define QCA953X_GPIO_OUT_MUX_SPI_MOSI 12 -+#define QCA953X_GPIO_OUT_MUX_LED_LINK1 41 -+#define QCA953X_GPIO_OUT_MUX_LED_LINK2 42 -+#define QCA953X_GPIO_OUT_MUX_LED_LINK3 43 -+#define QCA953X_GPIO_OUT_MUX_LED_LINK4 44 -+#define QCA953X_GPIO_OUT_MUX_LED_LINK5 45 -+ - #define QCA955X_GPIO_REG_OUT_FUNC0 0x2c - #define QCA955X_GPIO_REG_OUT_FUNC1 0x30 - #define QCA955X_GPIO_REG_OUT_FUNC2 0x34 -@@ -658,6 +790,7 @@ - #define AR913X_GPIO_COUNT 22 - #define AR933X_GPIO_COUNT 30 - #define AR934X_GPIO_COUNT 23 -+#define QCA953X_GPIO_COUNT 18 - #define QCA955X_GPIO_COUNT 24 - - /* -@@ -681,6 +814,24 @@ - #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13 - #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7 - -+#define QCA953X_SRIF_CPU_DPLL1_REG 0x1c0 -+#define QCA953X_SRIF_CPU_DPLL2_REG 0x1c4 -+#define QCA953X_SRIF_CPU_DPLL3_REG 0x1c8 -+ -+#define QCA953X_SRIF_DDR_DPLL1_REG 0x240 -+#define QCA953X_SRIF_DDR_DPLL2_REG 0x244 -+#define QCA953X_SRIF_DDR_DPLL3_REG 0x248 -+ -+#define QCA953X_SRIF_DPLL1_REFDIV_SHIFT 27 -+#define QCA953X_SRIF_DPLL1_REFDIV_MASK 0x1f -+#define QCA953X_SRIF_DPLL1_NINT_SHIFT 18 -+#define QCA953X_SRIF_DPLL1_NINT_MASK 0x1ff -+#define QCA953X_SRIF_DPLL1_NFRAC_MASK 0x0003ffff -+ -+#define QCA953X_SRIF_DPLL2_LOCAL_PLL BIT(30) -+#define QCA953X_SRIF_DPLL2_OUTDIV_SHIFT 13 -+#define QCA953X_SRIF_DPLL2_OUTDIV_MASK 0x7 -+ - #define AR71XX_GPIO_FUNC_STEREO_EN BIT(17) - #define AR71XX_GPIO_FUNC_SLIC_EN BIT(16) - #define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13) -@@ -887,6 +1038,16 @@ - #define AR934X_ETH_CFG_RDV_DELAY_SHIFT 16 - - /* -+ * QCA953X GMAC Interface -+ */ -+#define QCA953X_GMAC_REG_ETH_CFG 0x00 -+ -+#define QCA953X_ETH_CFG_SW_ONLY_MODE BIT(6) -+#define QCA953X_ETH_CFG_SW_PHY_SWAP BIT(7) -+#define QCA953X_ETH_CFG_SW_APB_ACCESS BIT(9) -+#define QCA953X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) -+ -+/* - * QCA955X GMAC Interface - */ - ---- a/arch/mips/include/asm/mach-ath79/ath79.h -+++ b/arch/mips/include/asm/mach-ath79/ath79.h -@@ -32,6 +32,7 @@ enum ath79_soc_type { - ATH79_SOC_AR9341, - ATH79_SOC_AR9342, - ATH79_SOC_AR9344, -+ ATH79_SOC_QCA9533, - ATH79_SOC_QCA9556, - ATH79_SOC_QCA9558, - }; -@@ -100,6 +101,16 @@ static inline int soc_is_ar934x(void) - return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344(); - } - -+static inline int soc_is_qca9533(void) -+{ -+ return ath79_soc == ATH79_SOC_QCA9533; -+} -+ -+static inline int soc_is_qca953x(void) -+{ -+ return soc_is_qca9533(); -+} -+ - static inline int soc_is_qca9556(void) - { - return ath79_soc == ATH79_SOC_QCA9556; diff --git a/target/linux/ar71xx/patches-4.14/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch b/target/linux/ar71xx/patches-4.14/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch deleted file mode 100644 index 670f7bef0a..0000000000 --- a/target/linux/ar71xx/patches-4.14/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch +++ /dev/null @@ -1,717 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -114,6 +114,12 @@ config SOC_QCA955X - select PCI_AR724X if PCI - def_bool n - -+config SOC_QCA956X -+ select USB_ARCH_HAS_EHCI -+ select HW_HAS_PCI -+ select PCI_AR724X if PCI -+ def_bool n -+ - config ATH79_DEV_M25P80 - select ATH79_DEV_SPI - def_bool n -@@ -148,7 +154,7 @@ config ATH79_DEV_USB - def_bool n - - config ATH79_DEV_WMAC -- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X) -+ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X || SOC_QCA956X) - def_bool n - - config ATH79_NVRAM ---- a/arch/mips/ath79/clock.c -+++ b/arch/mips/ath79/clock.c -@@ -523,6 +523,100 @@ static void __init qca955x_clocks_init(v - clk_add_alias("uart", NULL, "ref", NULL); - } - -+static void __init qca956x_clocks_init(void) -+{ -+ unsigned long ref_rate; -+ unsigned long cpu_rate; -+ unsigned long ddr_rate; -+ unsigned long ahb_rate; -+ u32 pll, out_div, ref_div, nint, hfrac, lfrac, clk_ctrl, postdiv; -+ u32 cpu_pll, ddr_pll; -+ u32 bootstrap; -+ -+ bootstrap = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP); -+ if (bootstrap & QCA956X_BOOTSTRAP_REF_CLK_40) -+ ref_rate = 40 * 1000 * 1000; -+ else -+ ref_rate = 25 * 1000 * 1000; -+ -+ pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG); -+ out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & -+ QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK; -+ ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) & -+ QCA956X_PLL_CPU_CONFIG_REFDIV_MASK; -+ -+ pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG); -+ nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) & -+ QCA956X_PLL_CPU_CONFIG1_NINT_MASK; -+ hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) & -+ QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK; -+ lfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT) & -+ QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK; -+ -+ cpu_pll = nint * ref_rate / ref_div; -+ cpu_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13); -+ cpu_pll += (hfrac >> 13) * ref_rate / ref_div; -+ cpu_pll /= (1 << out_div); -+ -+ pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG); -+ out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & -+ QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK; -+ ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) & -+ QCA956X_PLL_DDR_CONFIG_REFDIV_MASK; -+ pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG); -+ nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) & -+ QCA956X_PLL_DDR_CONFIG1_NINT_MASK; -+ hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) & -+ QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK; -+ lfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT) & -+ QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK; -+ -+ ddr_pll = nint * ref_rate / ref_div; -+ ddr_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13); -+ ddr_pll += (hfrac >> 13) * ref_rate / ref_div; -+ ddr_pll /= (1 << out_div); -+ -+ clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG); -+ -+ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & -+ QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; -+ -+ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS) -+ cpu_rate = ref_rate; -+ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL) -+ cpu_rate = ddr_pll / (postdiv + 1); -+ else -+ cpu_rate = cpu_pll / (postdiv + 1); -+ -+ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) & -+ QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK; -+ -+ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS) -+ ddr_rate = ref_rate; -+ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL) -+ ddr_rate = cpu_pll / (postdiv + 1); -+ else -+ ddr_rate = ddr_pll / (postdiv + 1); -+ -+ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) & -+ QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK; -+ -+ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS) -+ ahb_rate = ref_rate; -+ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL) -+ ahb_rate = ddr_pll / (postdiv + 1); -+ else -+ ahb_rate = cpu_pll / (postdiv + 1); -+ -+ ath79_add_sys_clkdev("ref", ref_rate); -+ ath79_add_sys_clkdev("cpu", cpu_rate); -+ ath79_add_sys_clkdev("ddr", ddr_rate); -+ ath79_add_sys_clkdev("ahb", ahb_rate); -+ -+ clk_add_alias("wdt", NULL, "ref", NULL); -+ clk_add_alias("uart", NULL, "ref", NULL); -+} -+ - void __init ath79_clocks_init(void) - { - if (soc_is_ar71xx()) -@@ -537,6 +631,8 @@ void __init ath79_clocks_init(void) - qca953x_clocks_init(); - else if (soc_is_qca955x()) - qca955x_clocks_init(); -+ else if (soc_is_qca956x() || soc_is_tp9343()) -+ qca956x_clocks_init(); - else - BUG(); - } ---- a/arch/mips/ath79/common.c -+++ b/arch/mips/ath79/common.c -@@ -107,6 +107,8 @@ void ath79_device_reset_set(u32 mask) - reg = QCA953X_RESET_REG_RESET_MODULE; - else if (soc_is_qca955x()) - reg = QCA955X_RESET_REG_RESET_MODULE; -+ else if (soc_is_qca956x() || soc_is_tp9343()) -+ reg = QCA956X_RESET_REG_RESET_MODULE; - else - panic("Reset register not defined for this SOC"); - -@@ -137,6 +139,8 @@ void ath79_device_reset_clear(u32 mask) - reg = QCA953X_RESET_REG_RESET_MODULE; - else if (soc_is_qca955x()) - reg = QCA955X_RESET_REG_RESET_MODULE; -+ else if (soc_is_qca956x() || soc_is_tp9343()) -+ reg = QCA956X_RESET_REG_RESET_MODULE; - else - panic("Reset register not defined for this SOC"); - -@@ -163,6 +167,8 @@ u32 ath79_device_reset_get(u32 mask) - reg = AR933X_RESET_REG_RESET_MODULE; - else if (soc_is_ar934x()) - reg = AR934X_RESET_REG_RESET_MODULE; -+ else if (soc_is_qca956x() || soc_is_tp9343()) -+ reg = QCA956X_RESET_REG_RESET_MODULE; - else - BUG(); - ---- a/arch/mips/ath79/dev-common.c -+++ b/arch/mips/ath79/dev-common.c -@@ -95,7 +95,9 @@ void __init ath79_register_uart(void) - soc_is_ar913x() || - soc_is_ar934x() || - soc_is_qca953x() || -- soc_is_qca955x()) { -+ soc_is_qca955x() || -+ soc_is_qca956x() || -+ soc_is_tp9343()) { - ath79_uart_data[0].uartclk = uart_clk_rate; - platform_device_register(&ath79_uart_device); - } else if (soc_is_ar933x()) { -@@ -164,6 +166,9 @@ void __init ath79_gpio_init(void) - } else if (soc_is_qca955x()) { - ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT; - ath79_gpio_pdata.oe_inverted = 1; -+ } else if (soc_is_qca956x() || soc_is_tp9343()) { -+ ath79_gpio_pdata.ngpios = QCA956X_GPIO_COUNT; -+ ath79_gpio_pdata.oe_inverted = 1; - } else { - BUG(); - } ---- a/arch/mips/ath79/dev-usb.c -+++ b/arch/mips/ath79/dev-usb.c -@@ -296,6 +296,19 @@ static void __init qca955x_usb_setup(voi - &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); - } - -+static void __init qca956x_usb_setup(void) -+{ -+ ath79_usb_register("ehci-platform", 0, -+ QCA956X_EHCI0_BASE, QCA956X_EHCI_SIZE, -+ ATH79_IP3_IRQ(0), -+ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); -+ -+ ath79_usb_register("ehci-platform", 1, -+ QCA956X_EHCI1_BASE, QCA956X_EHCI_SIZE, -+ ATH79_IP3_IRQ(1), -+ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); -+} -+ - void __init ath79_register_usb(void) - { - if (soc_is_ar71xx()) -@@ -314,6 +327,8 @@ void __init ath79_register_usb(void) - qca953x_usb_setup(); - else if (soc_is_qca955x()) - qca955x_usb_setup(); -+ else if (soc_is_qca956x()) -+ qca956x_usb_setup(); - else - BUG(); - } ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -195,6 +195,26 @@ static void qca955x_wmac_setup(void) - #define AR93XX_OTP_READ_DATA \ - (soc_is_ar934x() ? AR934X_OTP_READ_DATA : AR9300_OTP_READ_DATA) - -+static void qca956x_wmac_setup(void) -+{ -+ u32 t; -+ -+ ath79_wmac_device.name = "qca956x_wmac"; -+ -+ ath79_wmac_resources[0].start = QCA956X_WMAC_BASE; -+ ath79_wmac_resources[0].end = QCA956X_WMAC_BASE + QCA956X_WMAC_SIZE - 1; -+ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1); -+ ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1); -+ -+ t = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP); -+ if (t & QCA956X_BOOTSTRAP_REF_CLK_40) -+ ath79_wmac_data.is_clk_25mhz = false; -+ else -+ ath79_wmac_data.is_clk_25mhz = true; -+ -+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision; -+} -+ - static bool __init - ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data) - { -@@ -398,6 +418,8 @@ void __init ath79_register_wmac(u8 *cal_ - qca953x_wmac_setup(); - else if (soc_is_qca955x()) - qca955x_wmac_setup(); -+ else if (soc_is_qca956x() || soc_is_tp9343()) -+ qca956x_wmac_setup(); - else - BUG(); - ---- a/arch/mips/ath79/early_printk.c -+++ b/arch/mips/ath79/early_printk.c -@@ -120,6 +120,8 @@ static void prom_putchar_init(void) - case REV_ID_MAJOR_QCA9533_V2: - case REV_ID_MAJOR_QCA9556: - case REV_ID_MAJOR_QCA9558: -+ case REV_ID_MAJOR_TP9343: -+ case REV_ID_MAJOR_QCA956X: - _prom_putchar = prom_putchar_ar71xx; - break; - ---- a/arch/mips/ath79/gpio.c -+++ b/arch/mips/ath79/gpio.c -@@ -31,7 +31,10 @@ static void __iomem *ath79_gpio_get_func - soc_is_ar913x() || - soc_is_ar933x()) - reg = AR71XX_GPIO_REG_FUNC; -- else if (soc_is_ar934x() || soc_is_qca953x()) -+ else if (soc_is_ar934x() || -+ soc_is_qca953x() || -+ soc_is_qca956x() || -+ soc_is_tp9343()) - reg = AR934X_GPIO_REG_FUNC; - else - BUG(); -@@ -64,7 +67,7 @@ void __init ath79_gpio_output_select(uns - unsigned int reg; - u32 t, s; - -- BUG_ON(!soc_is_ar934x() && !soc_is_qca953x()); -+ BUG_ON(!soc_is_ar934x() && !soc_is_qca953x() && !soc_is_qca956x()); - - if (gpio >= AR934X_GPIO_COUNT) - return; ---- a/arch/mips/ath79/irq.c -+++ b/arch/mips/ath79/irq.c -@@ -162,6 +162,87 @@ static void qca955x_irq_init(void) - irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch); - } - -+static void qca956x_ip2_irq_dispatch(struct irq_desc *desc) -+{ -+ u32 status; -+ -+ status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS); -+ status &= QCA956X_EXT_INT_PCIE_RC1_ALL | QCA956X_EXT_INT_WMAC_ALL; -+ -+ if (status == 0) { -+ spurious_interrupt(); -+ return; -+ } -+ -+ if (status & QCA956X_EXT_INT_PCIE_RC1_ALL) { -+ /* TODO: flush DDR? */ -+ generic_handle_irq(ATH79_IP2_IRQ(0)); -+ } -+ -+ if (status & QCA956X_EXT_INT_WMAC_ALL) { -+ /* TODO: flsuh DDR? */ -+ generic_handle_irq(ATH79_IP2_IRQ(1)); -+ } -+} -+ -+static void qca956x_ip3_irq_dispatch(struct irq_desc *desc) -+{ -+ u32 status; -+ -+ status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS); -+ status &= QCA956X_EXT_INT_PCIE_RC2_ALL | -+ QCA956X_EXT_INT_USB1 | QCA956X_EXT_INT_USB2; -+ -+ if (status == 0) { -+ spurious_interrupt(); -+ return; -+ } -+ -+ if (status & QCA956X_EXT_INT_USB1) { -+ /* TODO: flush DDR? */ -+ generic_handle_irq(ATH79_IP3_IRQ(0)); -+ } -+ -+ if (status & QCA956X_EXT_INT_USB2) { -+ /* TODO: flush DDR? */ -+ generic_handle_irq(ATH79_IP3_IRQ(1)); -+ } -+ -+ if (status & QCA956X_EXT_INT_PCIE_RC2_ALL) { -+ /* TODO: flush DDR? */ -+ generic_handle_irq(ATH79_IP3_IRQ(2)); -+ } -+} -+ -+static void qca956x_enable_timer_cb(void) { -+ u32 misc; -+ -+ misc = ath79_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE); -+ misc |= MISC_INT_MIPS_SI_TIMERINT_MASK; -+ ath79_reset_wr(AR71XX_RESET_REG_MISC_INT_ENABLE, misc); -+} -+ -+static void qca956x_irq_init(void) -+{ -+ int i; -+ -+ for (i = ATH79_IP2_IRQ_BASE; -+ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) -+ irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq); -+ -+ irq_set_chained_handler(ATH79_CPU_IRQ(2), qca956x_ip2_irq_dispatch); -+ -+ for (i = ATH79_IP3_IRQ_BASE; -+ i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++) -+ irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq); -+ -+ irq_set_chained_handler(ATH79_CPU_IRQ(3), qca956x_ip3_irq_dispatch); -+ -+ /* QCA956x timer init workaround has to be applied right before setting -+ * up the clock. Else, there will be no jiffies */ -+ late_time_init = &qca956x_enable_timer_cb; -+} -+ - void __init arch_init_irq(void) - { - unsigned irq_wb_chan2 = -1; -@@ -189,7 +270,9 @@ void __init arch_init_irq(void) - soc_is_ar933x() || - soc_is_ar934x() || - soc_is_qca953x() || -- soc_is_qca955x()) -+ soc_is_qca955x() || -+ soc_is_qca956x() || -+ soc_is_tp9343()) - misc_is_ar71xx = false; - else - BUG(); -@@ -203,4 +286,6 @@ void __init arch_init_irq(void) - qca953x_irq_init(); - else if (soc_is_qca955x()) - qca955x_irq_init(); -+ else if (soc_is_qca956x() || soc_is_tp9343()) -+ qca956x_irq_init(); - } ---- a/arch/mips/ath79/pci.c -+++ b/arch/mips/ath79/pci.c -@@ -68,6 +68,21 @@ static const struct ath79_pci_irq qca955 - }, - }; - -+static const struct ath79_pci_irq qca956x_pci_irq_map[] = { -+ { -+ .bus = 0, -+ .slot = 0, -+ .pin = 1, -+ .irq = ATH79_PCI_IRQ(0), -+ }, -+ { -+ .bus = 1, -+ .slot = 0, -+ .pin = 1, -+ .irq = ATH79_PCI_IRQ(1), -+ }, -+}; -+ - int pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) - { - int irq = -1; -@@ -86,6 +101,9 @@ int pcibios_map_irq(const struct pci_dev - } else if (soc_is_qca955x()) { - ath79_pci_irq_map = qca955x_pci_irq_map; - ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map); -+ } else if (soc_is_qca956x()) { -+ ath79_pci_irq_map = qca956x_pci_irq_map; -+ ath79_pci_nr_irqs = ARRAY_SIZE(qca956x_pci_irq_map); - } else { - pr_crit("pci %s: invalid irq map\n", - pci_name((struct pci_dev *) dev)); -@@ -303,6 +321,15 @@ int __init ath79_register_pci(void) - QCA955X_PCI_MEM_SIZE, - 1, - ATH79_IP3_IRQ(2)); -+ } else if (soc_is_qca956x()) { -+ pdev = ath79_register_pci_ar724x(0, -+ QCA956X_PCI_CFG_BASE1, -+ QCA956X_PCI_CTRL_BASE1, -+ QCA956X_PCI_CRP_BASE1, -+ QCA956X_PCI_MEM_BASE1, -+ QCA956X_PCI_MEM_SIZE, -+ 1, -+ ATH79_IP3_IRQ(2)); - } else { - /* No PCI support */ - return -ENODEV; ---- a/arch/mips/ath79/setup.c -+++ b/arch/mips/ath79/setup.c -@@ -176,6 +176,18 @@ static void __init ath79_detect_sys_type - rev = id & QCA955X_REV_ID_REVISION_MASK; - break; - -+ case REV_ID_MAJOR_QCA956X: -+ ath79_soc = ATH79_SOC_QCA956X; -+ chip = "956X"; -+ rev = id & QCA956X_REV_ID_REVISION_MASK; -+ break; -+ -+ case REV_ID_MAJOR_TP9343: -+ ath79_soc = ATH79_SOC_TP9343; -+ chip = "9343"; -+ rev = id & QCA956X_REV_ID_REVISION_MASK; -+ break; -+ - default: - panic("ath79: unknown SoC, id:0x%08x", id); - } -@@ -183,9 +195,12 @@ static void __init ath79_detect_sys_type - if (ver == 1) - ath79_soc_rev = rev; - -- if (soc_is_qca953x() || soc_is_qca955x()) -+ if (soc_is_qca953x() || soc_is_qca955x() || soc_is_qca956x()) - sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s ver %u rev %u", - chip, ver, rev); -+ else if (soc_is_tp9343()) -+ sprintf(ath79_sys_type, "Qualcomm Atheros TP%s rev %u", -+ chip, rev); - else - sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev); - pr_info("SoC: %s\n", ath79_sys_type); ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -143,6 +143,23 @@ - #define QCA955X_NFC_BASE 0x1b800200 - #define QCA955X_NFC_SIZE 0xb8 - -+#define QCA956X_PCI_MEM_BASE1 0x12000000 -+#define QCA956X_PCI_MEM_SIZE 0x02000000 -+#define QCA956X_PCI_CFG_BASE1 0x16000000 -+#define QCA956X_PCI_CFG_SIZE 0x1000 -+#define QCA956X_PCI_CRP_BASE1 (AR71XX_APB_BASE + 0x00250000) -+#define QCA956X_PCI_CRP_SIZE 0x1000 -+#define QCA956X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000) -+#define QCA956X_PCI_CTRL_SIZE 0x100 -+ -+#define QCA956X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) -+#define QCA956X_WMAC_SIZE 0x20000 -+#define QCA956X_EHCI0_BASE 0x1b000000 -+#define QCA956X_EHCI1_BASE 0x1b400000 -+#define QCA956X_EHCI_SIZE 0x200 -+#define QCA956X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) -+#define QCA956X_GMAC_SIZE 0x64 -+ - #define AR9300_OTP_BASE 0x14000 - #define AR9300_OTP_STATUS 0x15f18 - #define AR9300_OTP_STATUS_TYPE 0x7 -@@ -152,6 +169,13 @@ - #define AR9300_OTP_READ_DATA 0x15f1c - - /* -+ * Hidden Registers -+ */ -+#define QCA956X_DAM_RESET_OFFSET 0xb90001bc -+#define QCA956X_DAM_RESET_SIZE 0x4 -+#define QCA956X_INLINE_CHKSUM_ENG BIT(27) -+ -+/* - * DDR_CTRL block - */ - #define AR71XX_DDR_REG_PCI_WIN0 0x7c -@@ -385,6 +409,49 @@ - #define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) - #define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) - -+#define QCA956X_PLL_CPU_CONFIG_REG 0x00 -+#define QCA956X_PLL_CPU_CONFIG1_REG 0x04 -+#define QCA956X_PLL_DDR_CONFIG_REG 0x08 -+#define QCA956X_PLL_DDR_CONFIG1_REG 0x0c -+#define QCA956X_PLL_CLK_CTRL_REG 0x10 -+ -+#define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 -+#define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f -+#define QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 -+#define QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7 -+ -+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT 0 -+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK 0x1f -+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT 5 -+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK 0x1fff -+#define QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT 18 -+#define QCA956X_PLL_CPU_CONFIG1_NINT_MASK 0x1ff -+ -+#define QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 -+#define QCA956X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f -+#define QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 -+#define QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 -+ -+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT 0 -+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK 0x1f -+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT 5 -+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK 0x1fff -+#define QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT 18 -+#define QCA956X_PLL_DDR_CONFIG1_NINT_MASK 0x1ff -+ -+#define QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2) -+#define QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3) -+#define QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4) -+#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5 -+#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f -+#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10 -+#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f -+#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15 -+#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f -+#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL BIT(20) -+#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL BIT(21) -+#define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) -+ - /* - * USB_CONFIG block - */ -@@ -432,6 +499,11 @@ - #define QCA955X_RESET_REG_BOOTSTRAP 0xb0 - #define QCA955X_RESET_REG_EXT_INT_STATUS 0xac - -+#define QCA956X_RESET_REG_RESET_MODULE 0x1c -+#define QCA956X_RESET_REG_BOOTSTRAP 0xb0 -+#define QCA956X_RESET_REG_EXT_INT_STATUS 0xac -+ -+#define MISC_INT_MIPS_SI_TIMERINT_MASK BIT(28) - #define MISC_INT_ETHSW BIT(12) - #define MISC_INT_TIMER4 BIT(10) - #define MISC_INT_TIMER3 BIT(9) -@@ -606,6 +678,8 @@ - - #define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4) - -+#define QCA956X_BOOTSTRAP_REF_CLK_40 BIT(2) -+ - #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) - #define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1) - #define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2) -@@ -673,6 +747,37 @@ - QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \ - QCA955X_EXT_INT_PCIE_RC2_INT3) - -+#define QCA956X_EXT_INT_WMAC_MISC BIT(0) -+#define QCA956X_EXT_INT_WMAC_TX BIT(1) -+#define QCA956X_EXT_INT_WMAC_RXLP BIT(2) -+#define QCA956X_EXT_INT_WMAC_RXHP BIT(3) -+#define QCA956X_EXT_INT_PCIE_RC1 BIT(4) -+#define QCA956X_EXT_INT_PCIE_RC1_INT0 BIT(5) -+#define QCA956X_EXT_INT_PCIE_RC1_INT1 BIT(6) -+#define QCA956X_EXT_INT_PCIE_RC1_INT2 BIT(7) -+#define QCA956X_EXT_INT_PCIE_RC1_INT3 BIT(8) -+#define QCA956X_EXT_INT_PCIE_RC2 BIT(12) -+#define QCA956X_EXT_INT_PCIE_RC2_INT0 BIT(13) -+#define QCA956X_EXT_INT_PCIE_RC2_INT1 BIT(14) -+#define QCA956X_EXT_INT_PCIE_RC2_INT2 BIT(15) -+#define QCA956X_EXT_INT_PCIE_RC2_INT3 BIT(16) -+#define QCA956X_EXT_INT_USB1 BIT(24) -+#define QCA956X_EXT_INT_USB2 BIT(28) -+ -+#define QCA956X_EXT_INT_WMAC_ALL \ -+ (QCA956X_EXT_INT_WMAC_MISC | QCA956X_EXT_INT_WMAC_TX | \ -+ QCA956X_EXT_INT_WMAC_RXLP | QCA956X_EXT_INT_WMAC_RXHP) -+ -+#define QCA956X_EXT_INT_PCIE_RC1_ALL \ -+ (QCA956X_EXT_INT_PCIE_RC1 | QCA956X_EXT_INT_PCIE_RC1_INT0 | \ -+ QCA956X_EXT_INT_PCIE_RC1_INT1 | QCA956X_EXT_INT_PCIE_RC1_INT2 | \ -+ QCA956X_EXT_INT_PCIE_RC1_INT3) -+ -+#define QCA956X_EXT_INT_PCIE_RC2_ALL \ -+ (QCA956X_EXT_INT_PCIE_RC2 | QCA956X_EXT_INT_PCIE_RC2_INT0 | \ -+ QCA956X_EXT_INT_PCIE_RC2_INT1 | QCA956X_EXT_INT_PCIE_RC2_INT2 | \ -+ QCA956X_EXT_INT_PCIE_RC2_INT3) -+ - #define REV_ID_MAJOR_MASK 0xfff0 - #define REV_ID_MAJOR_AR71XX 0x00a0 - #define REV_ID_MAJOR_AR913X 0x00b0 -@@ -688,6 +793,8 @@ - #define REV_ID_MAJOR_QCA9533_V2 0x0160 - #define REV_ID_MAJOR_QCA9556 0x0130 - #define REV_ID_MAJOR_QCA9558 0x1130 -+#define REV_ID_MAJOR_TP9343 0x0150 -+#define REV_ID_MAJOR_QCA956X 0x1150 - - #define AR71XX_REV_ID_MINOR_MASK 0x3 - #define AR71XX_REV_ID_MINOR_AR7130 0x0 -@@ -712,6 +819,8 @@ - - #define QCA955X_REV_ID_REVISION_MASK 0xf - -+#define QCA956X_REV_ID_REVISION_MASK 0xf -+ - /* - * SPI block - */ -@@ -784,6 +893,19 @@ - #define QCA955X_GPIO_REG_OUT_FUNC5 0x40 - #define QCA955X_GPIO_REG_FUNC 0x6c - -+#define QCA956X_GPIO_REG_OUT_FUNC0 0x2c -+#define QCA956X_GPIO_REG_OUT_FUNC1 0x30 -+#define QCA956X_GPIO_REG_OUT_FUNC2 0x34 -+#define QCA956X_GPIO_REG_OUT_FUNC3 0x38 -+#define QCA956X_GPIO_REG_OUT_FUNC4 0x3c -+#define QCA956X_GPIO_REG_OUT_FUNC5 0x40 -+#define QCA956X_GPIO_REG_IN_ENABLE0 0x44 -+#define QCA956X_GPIO_REG_IN_ENABLE3 0x50 -+#define QCA956X_GPIO_REG_FUNC 0x6c -+ -+#define QCA956X_GPIO_OUT_MUX_GE0_MDO 32 -+#define QCA956X_GPIO_OUT_MUX_GE0_MDC 33 -+ - #define AR71XX_GPIO_COUNT 16 - #define AR7240_GPIO_COUNT 18 - #define AR7241_GPIO_COUNT 20 -@@ -792,6 +914,7 @@ - #define AR934X_GPIO_COUNT 23 - #define QCA953X_GPIO_COUNT 18 - #define QCA955X_GPIO_COUNT 24 -+#define QCA956X_GPIO_COUNT 23 - - /* - * SRIF block ---- a/arch/mips/include/asm/mach-ath79/ath79.h -+++ b/arch/mips/include/asm/mach-ath79/ath79.h -@@ -35,6 +35,8 @@ enum ath79_soc_type { - ATH79_SOC_QCA9533, - ATH79_SOC_QCA9556, - ATH79_SOC_QCA9558, -+ ATH79_SOC_TP9343, -+ ATH79_SOC_QCA956X, - }; - - extern enum ath79_soc_type ath79_soc; -@@ -126,6 +128,26 @@ static inline int soc_is_qca955x(void) - return soc_is_qca9556() || soc_is_qca9558(); - } - -+static inline int soc_is_tp9343(void) -+{ -+ return ath79_soc == ATH79_SOC_TP9343; -+} -+ -+static inline int soc_is_qca9561(void) -+{ -+ return ath79_soc == ATH79_SOC_QCA956X; -+} -+ -+static inline int soc_is_qca9563(void) -+{ -+ return ath79_soc == ATH79_SOC_QCA956X; -+} -+ -+static inline int soc_is_qca956x(void) -+{ -+ return soc_is_qca9561() || soc_is_qca9563(); -+} -+ - void ath79_ddr_wb_flush(unsigned int reg); - void ath79_ddr_set_pci_windows(void); - diff --git a/target/linux/ar71xx/patches-4.14/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch b/target/linux/ar71xx/patches-4.14/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch deleted file mode 100644 index cab2f6f9cb..0000000000 --- a/target/linux/ar71xx/patches-4.14/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch +++ /dev/null @@ -1,38 +0,0 @@ ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -157,6 +157,10 @@ - #define QCA956X_EHCI0_BASE 0x1b000000 - #define QCA956X_EHCI1_BASE 0x1b400000 - #define QCA956X_EHCI_SIZE 0x200 -+#define QCA956X_GMAC_SGMII_BASE (AR71XX_APB_BASE + 0x00070000) -+#define QCA956X_GMAC_SGMII_SIZE 0x64 -+#define QCA956X_PLL_BASE (AR71XX_APB_BASE + 0x00050000) -+#define QCA956X_PLL_SIZE 0x50 - #define QCA956X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) - #define QCA956X_GMAC_SIZE 0x64 - -@@ -414,6 +418,7 @@ - #define QCA956X_PLL_DDR_CONFIG_REG 0x08 - #define QCA956X_PLL_DDR_CONFIG1_REG 0x0c - #define QCA956X_PLL_CLK_CTRL_REG 0x10 -+#define QCA956X_PLL_ETH_XMII_CONTROL_REG 0x30 - - #define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 - #define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f -@@ -1196,4 +1201,16 @@ - #define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3 - #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20 - -+/* -+ * QCA956X GMAC Interface -+ */ -+ -+#define QCA956X_GMAC_REG_ETH_CFG 0x00 -+ -+#define QCA956X_ETH_CFG_SW_ONLY_MODE BIT(7) -+#define QCA956X_ETH_CFG_SW_PHY_SWAP BIT(8) -+#define QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(9) -+#define QCA956X_ETH_CFG_SW_APB_ACCESS BIT(10) -+#define QCA956X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) -+ - #endif /* __ASM_MACH_AR71XX_REGS_H */ diff --git a/target/linux/ar71xx/patches-4.14/630-MIPS-ath79-fix-chained-irq-disable.patch b/target/linux/ar71xx/patches-4.14/630-MIPS-ath79-fix-chained-irq-disable.patch deleted file mode 100644 index a74eb4f43e..0000000000 --- a/target/linux/ar71xx/patches-4.14/630-MIPS-ath79-fix-chained-irq-disable.patch +++ /dev/null @@ -1,106 +0,0 @@ ---- a/arch/mips/ath79/irq.c -+++ b/arch/mips/ath79/irq.c -@@ -27,6 +27,9 @@ - #include "machtypes.h" - - -+static struct irq_chip ip2_chip; -+static struct irq_chip ip3_chip; -+ - static void ar934x_ip2_irq_dispatch(struct irq_desc *desc) - { - u32 status; -@@ -56,8 +59,7 @@ static void ar934x_ip2_irq_init(void) - - for (i = ATH79_IP2_IRQ_BASE; - i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) -- irq_set_chip_and_handler(i, &dummy_irq_chip, -- handle_level_irq); -+ irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq); - - irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch); - } -@@ -85,7 +87,7 @@ static void qca953x_irq_init(void) - - for (i = ATH79_IP2_IRQ_BASE; - i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) -- irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq); -+ irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq); - - irq_set_chained_handler(ATH79_CPU_IRQ(2), qca953x_ip2_irq_dispatch); - } -@@ -149,15 +151,13 @@ static void qca955x_irq_init(void) - - for (i = ATH79_IP2_IRQ_BASE; - i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) -- irq_set_chip_and_handler(i, &dummy_irq_chip, -- handle_level_irq); -+ irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq); - - irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch); - - for (i = ATH79_IP3_IRQ_BASE; - i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++) -- irq_set_chip_and_handler(i, &dummy_irq_chip, -- handle_level_irq); -+ irq_set_chip_and_handler(i, &ip3_chip, handle_level_irq); - - irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch); - } -@@ -228,13 +228,13 @@ static void qca956x_irq_init(void) - - for (i = ATH79_IP2_IRQ_BASE; - i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) -- irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq); -+ irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq); - - irq_set_chained_handler(ATH79_CPU_IRQ(2), qca956x_ip2_irq_dispatch); - - for (i = ATH79_IP3_IRQ_BASE; - i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++) -- irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq); -+ irq_set_chip_and_handler(i, &ip3_chip, handle_level_irq); - - irq_set_chained_handler(ATH79_CPU_IRQ(3), qca956x_ip3_irq_dispatch); - -@@ -243,12 +243,40 @@ static void qca956x_irq_init(void) - late_time_init = &qca956x_enable_timer_cb; - } - -+static void ath79_ip2_disable(struct irq_data *data) -+{ -+ disable_irq(ATH79_CPU_IRQ(2)); -+} -+ -+static void ath79_ip2_enable(struct irq_data *data) -+{ -+ enable_irq(ATH79_CPU_IRQ(2)); -+} -+ -+static void ath79_ip3_disable(struct irq_data *data) -+{ -+ disable_irq(ATH79_CPU_IRQ(3)); -+} -+ -+static void ath79_ip3_enable(struct irq_data *data) -+{ -+ enable_irq(ATH79_CPU_IRQ(3)); -+} -+ - void __init arch_init_irq(void) - { - unsigned irq_wb_chan2 = -1; - unsigned irq_wb_chan3 = -1; - bool misc_is_ar71xx; - -+ ip2_chip = dummy_irq_chip; -+ ip2_chip.irq_disable = ath79_ip2_disable; -+ ip2_chip.irq_enable = ath79_ip2_enable; -+ -+ ip3_chip = dummy_irq_chip; -+ ip3_chip.irq_disable = ath79_ip3_disable; -+ ip3_chip.irq_enable = ath79_ip3_enable; -+ - if (mips_machtype == ATH79_MACH_GENERIC_OF) { - irqchip_init(); - return; diff --git a/target/linux/ar71xx/patches-4.14/631-MIPS-ath79-wmac-enable-set-led-pin.patch b/target/linux/ar71xx/patches-4.14/631-MIPS-ath79-wmac-enable-set-led-pin.patch deleted file mode 100644 index a312217711..0000000000 --- a/target/linux/ar71xx/patches-4.14/631-MIPS-ath79-wmac-enable-set-led-pin.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -406,6 +406,11 @@ void __init ath79_wmac_set_ext_lna_gpio( - ar934x_set_ext_lna_gpio(chain, gpio); - } - -+void __init ath79_wmac_set_led_pin(int gpio) -+{ -+ ath79_wmac_data.led_pin = gpio; -+} -+ - void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) - { - if (soc_is_ar913x()) ---- a/arch/mips/ath79/dev-wmac.h -+++ b/arch/mips/ath79/dev-wmac.h -@@ -18,6 +18,7 @@ void ath79_wmac_disable_2ghz(void); - void ath79_wmac_disable_5ghz(void); - void ath79_wmac_set_tx_gain_buffalo(void); - void ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio); -+void ath79_wmac_set_led_pin(int gpio); - - bool ar93xx_wmac_read_mac_address(u8 *dest); - diff --git a/target/linux/ar71xx/patches-4.14/632-MIPS-ath79-gpio-enable-set-direction.patch b/target/linux/ar71xx/patches-4.14/632-MIPS-ath79-gpio-enable-set-direction.patch deleted file mode 100644 index 4cf36325e1..0000000000 --- a/target/linux/ar71xx/patches-4.14/632-MIPS-ath79-gpio-enable-set-direction.patch +++ /dev/null @@ -1,32 +0,0 @@ ---- a/arch/mips/ath79/common.h -+++ b/arch/mips/ath79/common.h -@@ -28,6 +28,7 @@ void ath79_gpio_function_enable(u32 mask - void ath79_gpio_function_disable(u32 mask); - void ath79_gpio_function_setup(u32 set, u32 clear); - void ath79_gpio_output_select(unsigned gpio, u8 val); -+int ath79_gpio_direction_select(unsigned gpio, bool oe); - void ath79_gpio_init(void); - - #endif /* __ATH79_COMMON_H */ ---- a/arch/mips/ath79/gpio.c -+++ b/arch/mips/ath79/gpio.c -@@ -83,3 +83,19 @@ void __init ath79_gpio_output_select(uns - /* flush write */ - (void) __raw_readl(base + reg); - } -+ -+int ath79_gpio_direction_select(unsigned gpio, bool oe) -+{ -+ void __iomem *base = ath79_gpio_base; -+ bool ieq_1 = (soc_is_ar934x() || -+ soc_is_qca953x()); -+ -+ if ((ieq_1 && oe) || (!ieq_1 && !oe)) -+ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << gpio), -+ base + AR71XX_GPIO_REG_OE); -+ else -+ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) | (1 << gpio), -+ base + AR71XX_GPIO_REG_OE); -+ -+ return 0; -+} diff --git a/target/linux/ar71xx/patches-4.14/640-MIPS-ath79-add-QCA955x-wmac-reset.patch b/target/linux/ar71xx/patches-4.14/640-MIPS-ath79-add-QCA955x-wmac-reset.patch deleted file mode 100644 index bb315a1e65..0000000000 --- a/target/linux/ar71xx/patches-4.14/640-MIPS-ath79-add-QCA955x-wmac-reset.patch +++ /dev/null @@ -1,82 +0,0 @@ ---- a/arch/mips/ath79/common.c -+++ b/arch/mips/ath79/common.c -@@ -38,7 +38,7 @@ unsigned int ath79_soc_rev; - void __iomem *ath79_pll_base; - void __iomem *ath79_reset_base; - EXPORT_SYMBOL_GPL(ath79_reset_base); --static void __iomem *ath79_ddr_base; -+void __iomem *ath79_ddr_base; - static void __iomem *ath79_ddr_wb_flush_base; - static void __iomem *ath79_ddr_pci_win_base; - ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -32,7 +32,7 @@ - #define AR71XX_SPI_SIZE 0x01000000 - - #define AR71XX_DDR_CTRL_BASE (AR71XX_APB_BASE + 0x00000000) --#define AR71XX_DDR_CTRL_SIZE 0x100 -+#define AR71XX_DDR_CTRL_SIZE 0x200 - #define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000) - #define AR71XX_UART_SIZE 0x100 - #define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) -@@ -229,6 +229,9 @@ - #define QCA953X_DDR_REG_FLUSH_PCIE 0xa8 - #define QCA953X_DDR_REG_FLUSH_WMAC 0xac - -+#define QCA955X_DDR_CTL_CONFIG 0x108 -+#define QCA955X_DDR_CTL_CONFIG_ACT_WMAC BIT(23) -+ - /* - * PLL block - */ ---- a/arch/mips/ath79/dev-wmac.c -+++ b/arch/mips/ath79/dev-wmac.c -@@ -165,6 +165,27 @@ static void qca953x_wmac_setup(void) - ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision; - } - -+static int ar955x_wmac_reset(void) -+{ -+ int i; -+ -+ /* Try to wait for WMAC DDR activity to stop */ -+ for (i = 0; i < 10; i++) { -+ if (!(__raw_readl(ath79_ddr_base + QCA955X_DDR_CTL_CONFIG) & -+ QCA955X_DDR_CTL_CONFIG_ACT_WMAC)) -+ break; -+ -+ udelay(10); -+ } -+ -+ ath79_device_reset_set(QCA955X_RESET_RTC); -+ udelay(10); -+ ath79_device_reset_clear(QCA955X_RESET_RTC); -+ udelay(10); -+ -+ return 0; -+} -+ - static void qca955x_wmac_setup(void) - { - u32 t; -@@ -181,6 +202,8 @@ static void qca955x_wmac_setup(void) - ath79_wmac_data.is_clk_25mhz = false; - else - ath79_wmac_data.is_clk_25mhz = true; -+ -+ ath79_wmac_data.external_reset = ar955x_wmac_reset; - } - - #define AR93XX_WMAC_SIZE \ ---- a/arch/mips/ath79/common.h -+++ b/arch/mips/ath79/common.h -@@ -19,6 +19,8 @@ - #define ATH79_MEM_SIZE_MIN (2 * 1024 * 1024) - #define ATH79_MEM_SIZE_MAX (256 * 1024 * 1024) - -+extern void __iomem *ath79_ddr_base; -+ - void ath79_clocks_init(void); - unsigned long ath79_get_sys_clk_rate(const char *id); - diff --git a/target/linux/ar71xx/patches-4.14/700-MIPS-ath79-add-openwrt-Kconfig.patch b/target/linux/ar71xx/patches-4.14/700-MIPS-ath79-add-openwrt-Kconfig.patch deleted file mode 100644 index 093def8d11..0000000000 --- a/target/linux/ar71xx/patches-4.14/700-MIPS-ath79-add-openwrt-Kconfig.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -83,6 +83,8 @@ config ATH79_MACH_UBNT_XM - Say 'Y' here if you want your kernel to support the - Ubiquiti Networks XM (rev 1.0) board. - -+source "arch/mips/ath79/Kconfig.openwrt" -+ - endmenu - - config SOC_AR71XX diff --git a/target/linux/ar71xx/patches-4.14/701-MIPS-ath79-add-routerboard-detection.patch b/target/linux/ar71xx/patches-4.14/701-MIPS-ath79-add-routerboard-detection.patch deleted file mode 100644 index ae9e7772b5..0000000000 --- a/target/linux/ar71xx/patches-4.14/701-MIPS-ath79-add-routerboard-detection.patch +++ /dev/null @@ -1,35 +0,0 @@ ---- a/arch/mips/ath79/prom.c -+++ b/arch/mips/ath79/prom.c -@@ -136,6 +136,32 @@ void __init prom_init(void) - initrd_end = initrd_start + fw_getenvl("initrd_size"); - } - #endif -+ -+ if (strstr(arcs_cmdline, "board=750Gr3") || -+ strstr(arcs_cmdline, "board=750i") || -+ strstr(arcs_cmdline, "board=750-hb") || -+ strstr(arcs_cmdline, "board=411") || -+ strstr(arcs_cmdline, "board=433") || -+ strstr(arcs_cmdline, "board=435") || -+ strstr(arcs_cmdline, "board=450") || -+ strstr(arcs_cmdline, "board=493") || -+ strstr(arcs_cmdline, "board=951G") || -+ strstr(arcs_cmdline, "board=H951L") || -+ strstr(arcs_cmdline, "board=952-hb") || -+ strstr(arcs_cmdline, "board=953gs") || -+ strstr(arcs_cmdline, "board=962") || -+ strstr(arcs_cmdline, "board=lhg") || -+ strstr(arcs_cmdline, "board=map-hb") || -+ strstr(arcs_cmdline, "board=map2-hb") || -+ strstr(arcs_cmdline, "board=wap-hb") || -+ strstr(arcs_cmdline, "board=wap-lte") || -+ strstr(arcs_cmdline, "board=wapg-sc") || -+ strstr(arcs_cmdline, "board=2011L") || -+ strstr(arcs_cmdline, "board=2011r") || -+ strstr(arcs_cmdline, "board=711Gr100") || -+ strstr(arcs_cmdline, "board=911L") || -+ strstr(arcs_cmdline, "board=922gs")) -+ ath79_prom_append_cmdline("console", "ttyS0,115200"); - } - - void __init prom_free_prom_memory(void) diff --git a/target/linux/ar71xx/patches-4.14/702-MIPS-ath79-fixup-routerboot-board-parameter.patch b/target/linux/ar71xx/patches-4.14/702-MIPS-ath79-fixup-routerboot-board-parameter.patch deleted file mode 100644 index b8715bba9e..0000000000 --- a/target/linux/ar71xx/patches-4.14/702-MIPS-ath79-fixup-routerboot-board-parameter.patch +++ /dev/null @@ -1,43 +0,0 @@ -From: Gabor Juhos <juhosg@freemail.hu> -Date: Sat, 2 Dec 2017 19:15:29 +0100 -Subject: [PATCH] MIPS: ath79: fix board detection with newer RouterBOOT versions - -Recent RouterBOOT version (at least version 3.41 on RB911G-5HPacD) -use "Board=" kernel parameter instead of "board=" to pass the board -name to the kernel. Due to this change the board detection code is -not working on the devices shipped with the new RouterBOOT version. -Because the kernel is unable to identify these boards they become -unusable despite that they are supported by the current code. - -Update the prom_init code to convert the 'Board' kernel parameter to -'board'. After this change, the board detection works also with the -new RouterBOOT versions. - -Signed-off-by: Gabor Juhos <juhosg@freemail.hu> ---- ---- a/arch/mips/ath79/prom.c -+++ b/arch/mips/ath79/prom.c -@@ -104,6 +104,7 @@ static int __init ath79_prom_init_myload - void __init prom_init(void) - { - const char *env; -+ char *c; - - if (ath79_prom_init_myloader()) - return; -@@ -137,6 +138,15 @@ void __init prom_init(void) - } - #endif - -+ /* -+ * RouterBOOT uses "Board" kernel parameter instead of "board" since -+ * version 3.41 (or so). Replace the first character of the parameter -+ * to keep board detection working. -+ */ -+ c = strstr(arcs_cmdline, "Board="); -+ if (c) -+ c[0] = 'b'; -+ - if (strstr(arcs_cmdline, "board=750Gr3") || - strstr(arcs_cmdline, "board=750i") || - strstr(arcs_cmdline, "board=750-hb") || diff --git a/target/linux/ar71xx/patches-4.14/739-MIPS-ath79-add-gpio-func-register-for-QCA955x-SoC.patch b/target/linux/ar71xx/patches-4.14/739-MIPS-ath79-add-gpio-func-register-for-QCA955x-SoC.patch deleted file mode 100644 index a65f7d993f..0000000000 --- a/target/linux/ar71xx/patches-4.14/739-MIPS-ath79-add-gpio-func-register-for-QCA955x-SoC.patch +++ /dev/null @@ -1,38 +0,0 @@ ---- a/arch/mips/ath79/gpio.c -+++ b/arch/mips/ath79/gpio.c -@@ -33,6 +33,7 @@ static void __iomem *ath79_gpio_get_func - reg = AR71XX_GPIO_REG_FUNC; - else if (soc_is_ar934x() || - soc_is_qca953x() || -+ soc_is_qca955x() || - soc_is_qca956x() || - soc_is_tp9343()) - reg = AR934X_GPIO_REG_FUNC; -@@ -64,15 +65,21 @@ void ath79_gpio_function_disable(u32 mas - void __init ath79_gpio_output_select(unsigned gpio, u8 val) - { - void __iomem *base = ath79_gpio_base; -- unsigned int reg; -+ unsigned int reg, reg_base; - u32 t, s; - -- BUG_ON(!soc_is_ar934x() && !soc_is_qca953x() && !soc_is_qca956x()); -- -- if (gpio >= AR934X_GPIO_COUNT) -- return; -+ if (soc_is_ar934x()) -+ reg_base = AR934X_GPIO_REG_OUT_FUNC0; -+ else if (soc_is_qca953x()) -+ reg_base = QCA953X_GPIO_REG_OUT_FUNC0; -+ else if (soc_is_qca955x()) -+ reg_base = QCA955X_GPIO_REG_OUT_FUNC0; -+ else if (soc_is_qca956x()) -+ reg_base = QCA956X_GPIO_REG_OUT_FUNC0; -+ else -+ BUG(); - -- reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4); -+ reg = reg_base + 4 * (gpio / 4); - s = 8 * (gpio % 4); - - t = __raw_readl(base + reg); diff --git a/target/linux/ar71xx/patches-4.14/740-MIPS-ath79-add-PCI-for-QCA953x-SoC.patch b/target/linux/ar71xx/patches-4.14/740-MIPS-ath79-add-PCI-for-QCA953x-SoC.patch deleted file mode 100644 index 659f74451c..0000000000 --- a/target/linux/ar71xx/patches-4.14/740-MIPS-ath79-add-PCI-for-QCA953x-SoC.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/arch/mips/ath79/pci.c -+++ b/arch/mips/ath79/pci.c -@@ -53,6 +53,15 @@ static const struct ath79_pci_irq ar724x - } - }; - -+static const struct ath79_pci_irq qca953x_pci_irq_map[] = { -+ { -+ .bus = 0, -+ .slot = 0, -+ .pin = 1, -+ .irq = ATH79_PCI_IRQ(0), -+ }, -+}; -+ - static const struct ath79_pci_irq qca955x_pci_irq_map[] = { - { - .bus = 0, -@@ -98,6 +107,9 @@ int pcibios_map_irq(const struct pci_dev - soc_is_ar9344()) { - ath79_pci_irq_map = ar724x_pci_irq_map; - ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map); -+ } else if (soc_is_qca953x()) { -+ ath79_pci_irq_map = qca953x_pci_irq_map; -+ ath79_pci_nr_irqs = ARRAY_SIZE(qca953x_pci_irq_map); - } else if (soc_is_qca955x()) { - ath79_pci_irq_map = qca955x_pci_irq_map; - ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map); -@@ -303,6 +315,15 @@ int __init ath79_register_pci(void) - AR724X_PCI_MEM_SIZE, - 0, - ATH79_IP2_IRQ(0)); -+ } else if (soc_is_qca9533()) { -+ pdev = ath79_register_pci_ar724x(0, -+ QCA953X_PCI_CFG_BASE0, -+ QCA953X_PCI_CTRL_BASE0, -+ QCA953X_PCI_CRP_BASE0, -+ QCA953X_PCI_MEM_BASE0, -+ QCA953X_PCI_MEM_SIZE, -+ 0, -+ ATH79_IP2_IRQ(0)); - } else if (soc_is_qca9558()) { - pdev = ath79_register_pci_ar724x(0, - QCA955X_PCI_CFG_BASE0, diff --git a/target/linux/ar71xx/patches-4.14/741-MIPS-ath79-add-PCI-for-QCA9556-SoC.patch b/target/linux/ar71xx/patches-4.14/741-MIPS-ath79-add-PCI-for-QCA9556-SoC.patch deleted file mode 100644 index 5ca0784253..0000000000 --- a/target/linux/ar71xx/patches-4.14/741-MIPS-ath79-add-PCI-for-QCA9556-SoC.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/arch/mips/ath79/pci.c -+++ b/arch/mips/ath79/pci.c -@@ -324,7 +324,8 @@ int __init ath79_register_pci(void) - QCA953X_PCI_MEM_SIZE, - 0, - ATH79_IP2_IRQ(0)); -- } else if (soc_is_qca9558()) { -+ } else if (soc_is_qca9558() || -+ soc_is_qca9556()) { - pdev = ath79_register_pci_ar724x(0, - QCA955X_PCI_CFG_BASE0, - QCA955X_PCI_CTRL_BASE0, diff --git a/target/linux/ar71xx/patches-4.14/818-MIPS-ath79-add-nu801-led-driver.patch b/target/linux/ar71xx/patches-4.14/818-MIPS-ath79-add-nu801-led-driver.patch deleted file mode 100644 index 349c43d9fb..0000000000 --- a/target/linux/ar71xx/patches-4.14/818-MIPS-ath79-add-nu801-led-driver.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -632,6 +632,13 @@ config LEDS_IS31FL32XX - - comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)" - -+config LEDS_NU801 -+ tristate "LED driver for NU801 RGB LED" -+ depends on LEDS_CLASS && (ATH79_MACH_MR18 || ATH79_MACH_Z1) -+ help -+ This option enables support for NU801 RGB LED driver chips -+ accessed via GPIO. -+ - config LEDS_BLINKM - tristate "LED support for the BlinkM I2C RGB LED" - depends on LEDS_CLASS ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -58,6 +58,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt359 - obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o - obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o - obj-$(CONFIG_LEDS_RB750) += leds-rb750.o -+obj-$(CONFIG_LEDS_NU801) += leds-nu801.o - obj-$(CONFIG_LEDS_NS2) += leds-ns2.o - obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o - obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o diff --git a/target/linux/ar71xx/patches-4.14/820-MIPS-ath79-add_gpio_function2_setup.patch b/target/linux/ar71xx/patches-4.14/820-MIPS-ath79-add_gpio_function2_setup.patch deleted file mode 100644 index afa7b69b43..0000000000 --- a/target/linux/ar71xx/patches-4.14/820-MIPS-ath79-add_gpio_function2_setup.patch +++ /dev/null @@ -1,67 +0,0 @@ -Add access to the function2 gpio register. This probably has to be -converted into a pimux driver later on. This is needed for some setup -functions on the Arduino Yun. - ---- a/arch/mips/ath79/common.h -+++ b/arch/mips/ath79/common.h -@@ -29,6 +29,7 @@ void ath79_ddr_ctrl_init(void); - void ath79_gpio_function_enable(u32 mask); - void ath79_gpio_function_disable(u32 mask); - void ath79_gpio_function_setup(u32 set, u32 clear); -+void ath79_gpio_function2_setup(u32 set, u32 clear); - void ath79_gpio_output_select(unsigned gpio, u8 val); - int ath79_gpio_direction_select(unsigned gpio, bool oe); - void ath79_gpio_init(void); ---- a/arch/mips/ath79/gpio.c -+++ b/arch/mips/ath79/gpio.c -@@ -43,6 +43,31 @@ static void __iomem *ath79_gpio_get_func - return ath79_gpio_base + reg; - } - -+static void __iomem *ath79_gpio_get_function2_reg(void) -+{ -+ u32 reg = 0; -+ -+ if (soc_is_ar71xx() || -+ soc_is_ar724x() || -+ soc_is_ar913x() || -+ soc_is_ar933x()) -+ reg = AR71XX_GPIO_REG_FUNC_2; -+ else -+ BUG(); -+ -+ return ath79_gpio_base + reg; -+} -+ -+ -+void ath79_gpio_function2_setup(u32 set, u32 clear) -+{ -+ void __iomem *reg = ath79_gpio_get_function2_reg(); -+ -+ __raw_writel((__raw_readl(reg) & ~clear) | set, reg); -+ /* flush write */ -+ __raw_readl(reg); -+} -+ - void ath79_gpio_function_setup(u32 set, u32 clear) - { - void __iomem *reg = ath79_gpio_get_function_reg(); ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -865,6 +865,7 @@ - #define AR71XX_GPIO_REG_INT_PENDING 0x20 - #define AR71XX_GPIO_REG_INT_ENABLE 0x24 - #define AR71XX_GPIO_REG_FUNC 0x28 -+#define AR71XX_GPIO_REG_FUNC_2 0x30 - - #define AR934X_GPIO_REG_OUT_FUNC0 0x2c - #define AR934X_GPIO_REG_OUT_FUNC1 0x30 -@@ -989,6 +990,8 @@ - #define AR724X_GPIO_FUNC_UART_EN BIT(1) - #define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0) - -+#define AR933X_GPIO_FUNC2_JUMPSTART_DISABLE BIT(9) -+ - #define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22) - #define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21) - #define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20) diff --git a/target/linux/ar71xx/patches-4.14/821-serial-core-add-support-for-boot-console-with-arbitr.patch b/target/linux/ar71xx/patches-4.14/821-serial-core-add-support-for-boot-console-with-arbitr.patch deleted file mode 100644 index 23b6d73959..0000000000 --- a/target/linux/ar71xx/patches-4.14/821-serial-core-add-support-for-boot-console-with-arbitr.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 4d3c17975c7814884a721fe693b3adf5c426d759 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Tue, 10 Nov 2015 22:18:39 +0100 -Subject: [RFC] serial: core: add support for boot console with arbitrary - baud rates - -The Arduino Yun uses a baud rate of 250000 by default. The serial is -going over the Atmel ATmega and is used to connect to this chip. -Without this patch Linux wants to switch the console to 9600 Baud. - -With this patch Linux will use the configured baud rate and not a -default one specified in uart_register_driver(). - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> -[rebased to 4.14, slightly reworded commit message] -Signed-off-by: Sungbo Eo <mans0n@gorani.run> ---- - drivers/tty/serial/serial_core.c | 6 +++++- - include/linux/console.h | 1 + - 2 files changed, 6 insertions(+), 1 deletions(-) - ---- a/drivers/tty/serial/serial_core.c -+++ b/drivers/tty/serial/serial_core.c -@@ -232,6 +232,8 @@ static int uart_port_startup(struct tty_ - if (retval == 0) { - if (uart_console(uport) && uport->cons->cflag) { - tty->termios.c_cflag = uport->cons->cflag; -+ tty->termios.c_ospeed = uport->cons->baud; -+ tty->termios.c_ispeed = uport->cons->baud; - uport->cons->cflag = 0; - } - /* -@@ -2072,8 +2074,10 @@ uart_set_options(struct uart_port *port, - * Allow the setting of the UART parameters with a NULL console - * too: - */ -- if (co) -+ if (co) { - co->cflag = termios.c_cflag; -+ co->baud = baud; -+ } - - return 0; - } ---- a/include/linux/console.h -+++ b/include/linux/console.h -@@ -145,6 +145,7 @@ struct console { - short flags; - short index; - int cflag; -+ int baud; - void *data; - struct console *next; - }; diff --git a/target/linux/ar71xx/patches-4.14/900-mdio_bitbang_ignore_ta_value.patch b/target/linux/ar71xx/patches-4.14/900-mdio_bitbang_ignore_ta_value.patch deleted file mode 100644 index 8f8f349a66..0000000000 --- a/target/linux/ar71xx/patches-4.14/900-mdio_bitbang_ignore_ta_value.patch +++ /dev/null @@ -1,32 +0,0 @@ ---- a/drivers/net/phy/mdio-bitbang.c -+++ b/drivers/net/phy/mdio-bitbang.c -@@ -155,7 +155,7 @@ static int mdiobb_cmd_addr(struct mdiobb - static int mdiobb_read(struct mii_bus *bus, int phy, int reg) - { - struct mdiobb_ctrl *ctrl = bus->priv; -- int ret, i; -+ int ret; - - if (reg & MII_ADDR_C45) { - reg = mdiobb_cmd_addr(ctrl, phy, reg); -@@ -165,19 +165,7 @@ static int mdiobb_read(struct mii_bus *b - - ctrl->ops->set_mdio_dir(ctrl, 0); - -- /* check the turnaround bit: the PHY should be driving it to zero, if this -- * PHY is listed in phy_ignore_ta_mask as having broken TA, skip that -- */ -- if (mdiobb_get_bit(ctrl) != 0 && -- !(bus->phy_ignore_ta_mask & (1 << phy))) { -- /* PHY didn't drive TA low -- flush any bits it -- * may be trying to send. -- */ -- for (i = 0; i < 32; i++) -- mdiobb_get_bit(ctrl); -- -- return 0xffff; -- } -+ mdiobb_get_bit(ctrl); - - ret = mdiobb_get_num(ctrl, 16); - mdiobb_get_bit(ctrl); diff --git a/target/linux/ar71xx/patches-4.14/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch b/target/linux/ar71xx/patches-4.14/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch deleted file mode 100644 index a830346a31..0000000000 --- a/target/linux/ar71xx/patches-4.14/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 66e584435ac0de6e0abeb6d7166fe4fe25d6bb73 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jogo@openwrt.org> -Date: Tue, 16 Jun 2015 13:15:08 +0200 -Subject: [PATCH] phy/mdio-bitbang: prevent rescheduling during command - -It seems some phys have some maximum timings for accessing the MDIO line, -resulting in bit errors under cpu stress. Prevent this from happening by -disabling interrupts when sending commands. - -Signed-off-by: Jonas Gorski <jogo@openwrt.org> ---- - drivers/net/phy/mdio-bitbang.c | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/drivers/net/phy/mdio-bitbang.c -+++ b/drivers/net/phy/mdio-bitbang.c -@@ -17,6 +17,7 @@ - * kind, whether express or implied. - */ - -+#include <linux/irqflags.h> - #include <linux/module.h> - #include <linux/mdio-bitbang.h> - #include <linux/types.h> -@@ -156,7 +157,9 @@ static int mdiobb_read(struct mii_bus *b - { - struct mdiobb_ctrl *ctrl = bus->priv; - int ret; -+ unsigned long flags; - -+ local_irq_save(flags); - if (reg & MII_ADDR_C45) { - reg = mdiobb_cmd_addr(ctrl, phy, reg); - mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg); -@@ -169,13 +172,17 @@ static int mdiobb_read(struct mii_bus *b - - ret = mdiobb_get_num(ctrl, 16); - mdiobb_get_bit(ctrl); -+ local_irq_restore(flags); -+ - return ret; - } - - static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val) - { - struct mdiobb_ctrl *ctrl = bus->priv; -+ unsigned long flags; - -+ local_irq_save(flags); - if (reg & MII_ADDR_C45) { - reg = mdiobb_cmd_addr(ctrl, phy, reg); - mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg); -@@ -190,6 +197,8 @@ static int mdiobb_write(struct mii_bus * - - ctrl->ops->set_mdio_dir(ctrl, 0); - mdiobb_get_bit(ctrl); -+ local_irq_restore(flags); -+ - return 0; - } - diff --git a/target/linux/ar71xx/patches-4.14/902-at803x-add-reset-gpio-pdata.patch b/target/linux/ar71xx/patches-4.14/902-at803x-add-reset-gpio-pdata.patch deleted file mode 100644 index e4e51963bb..0000000000 --- a/target/linux/ar71xx/patches-4.14/902-at803x-add-reset-gpio-pdata.patch +++ /dev/null @@ -1,68 +0,0 @@ -Add support for configuring AT803x GPIO reset via platform data. -This is necessary, because ath79 is not converted to device tree yet. - -Signed-off-by: Felix Fietkau <nbd@nbd.name> - ---- a/include/linux/platform_data/phy-at803x.h -+++ b/include/linux/platform_data/phy-at803x.h -@@ -6,6 +6,8 @@ struct at803x_platform_data { - int enable_rgmii_tx_delay:1; - int enable_rgmii_rx_delay:1; - int fixup_rgmii_tx_delay:1; -+ int has_reset_gpio:1; -+ int reset_gpio; - }; - - #endif /* _PHY_AT803X_PDATA_H */ ---- a/drivers/net/phy/at803x.c -+++ b/drivers/net/phy/at803x.c -@@ -259,6 +259,7 @@ static int at803x_resume(struct phy_devi - - static int at803x_probe(struct phy_device *phydev) - { -+ struct at803x_platform_data *pdata; - struct device *dev = &phydev->mdio.dev; - struct at803x_priv *priv; - struct gpio_desc *gpiod_reset; -@@ -271,6 +272,12 @@ static int at803x_probe(struct phy_devic - phydev->drv->phy_id != ATH8032_PHY_ID) - goto does_not_require_reset_workaround; - -+ pdata = dev_get_platdata(dev); -+ if (pdata && pdata->has_reset_gpio) { -+ devm_gpio_request(dev, pdata->reset_gpio, "reset"); -+ gpio_direction_output(pdata->reset_gpio, 1); -+ } -+ - gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(gpiod_reset)) - return PTR_ERR(gpiod_reset); -@@ -402,15 +409,23 @@ static void at803x_link_change_notify(st - * cannot recover from by software. - */ - if (phydev->state == PHY_NOLINK) { -- if (priv->gpiod_reset && !priv->phy_reset) { -+ if ((priv->gpiod_reset || (pdata && pdata->has_reset_gpio)) && -+ !priv->phy_reset) { - struct at803x_context context; - - at803x_context_save(phydev, &context); - -- gpiod_set_value(priv->gpiod_reset, 1); -- msleep(1); -- gpiod_set_value(priv->gpiod_reset, 0); -- msleep(1); -+ if (pdata && pdata->has_reset_gpio) { -+ gpio_set_value_cansleep(pdata->reset_gpio, 0); -+ msleep(1); -+ gpio_set_value_cansleep(pdata->reset_gpio, 1); -+ msleep(1); -+ } else { -+ gpiod_set_value(priv->gpiod_reset, 1); -+ msleep(1); -+ gpiod_set_value(priv->gpiod_reset, 0); -+ msleep(1); -+ } - - at803x_context_restore(phydev, &context); - diff --git a/target/linux/ar71xx/patches-4.14/903-at803x-add-sgmii-aneg-override-pdata.patch b/target/linux/ar71xx/patches-4.14/903-at803x-add-sgmii-aneg-override-pdata.patch deleted file mode 100644 index 600f8ff6de..0000000000 --- a/target/linux/ar71xx/patches-4.14/903-at803x-add-sgmii-aneg-override-pdata.patch +++ /dev/null @@ -1,38 +0,0 @@ ---- a/drivers/net/phy/at803x.c -+++ b/drivers/net/phy/at803x.c -@@ -458,12 +458,15 @@ static void at803x_link_change_notify(st - - static int at803x_aneg_done(struct phy_device *phydev) - { -+ struct at803x_platform_data *pdata; - int ccr; - - int aneg_done = genphy_aneg_done(phydev); - if (aneg_done != BMSR_ANEGCOMPLETE) - return aneg_done; - -+ pdata = dev_get_platdata(&phydev->mdio.dev); -+ - /* - * in SGMII mode, if copper side autoneg is successful, - * also check SGMII side autoneg result -@@ -478,7 +481,8 @@ static int at803x_aneg_done(struct phy_d - /* check if the SGMII link is OK. */ - if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) { - pr_warn("803x_aneg_done: SGMII link is not ok\n"); -- aneg_done = 0; -+ if (!pdata || !pdata->override_sgmii_aneg) -+ aneg_done = 0; - } - /* switch back to copper page */ - phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL); ---- a/include/linux/platform_data/phy-at803x.h -+++ b/include/linux/platform_data/phy-at803x.h -@@ -7,6 +7,7 @@ struct at803x_platform_data { - int enable_rgmii_rx_delay:1; - int fixup_rgmii_tx_delay:1; - int has_reset_gpio:1; -+ int override_sgmii_aneg:1; - int reset_gpio; - }; - diff --git a/target/linux/ar71xx/patches-4.14/910-unaligned_access_hacks.patch b/target/linux/ar71xx/patches-4.14/910-unaligned_access_hacks.patch deleted file mode 100644 index 6938f96551..0000000000 --- a/target/linux/ar71xx/patches-4.14/910-unaligned_access_hacks.patch +++ /dev/null @@ -1,942 +0,0 @@ ---- a/arch/mips/include/asm/checksum.h -+++ b/arch/mips/include/asm/checksum.h -@@ -134,26 +134,30 @@ static inline __sum16 ip_fast_csum(const - const unsigned int *stop = word + ihl; - unsigned int csum; - int carry; -+ unsigned int w; - -- csum = word[0]; -- csum += word[1]; -- carry = (csum < word[1]); -+ csum = net_hdr_word(word++); -+ -+ w = net_hdr_word(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; - -- csum += word[2]; -- carry = (csum < word[2]); -+ w = net_hdr_word(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; - -- csum += word[3]; -- carry = (csum < word[3]); -+ w = net_hdr_word(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; - -- word += 4; - do { -- csum += *word; -- carry = (csum < *word); -+ w = net_hdr_word(word++); -+ csum += w; -+ carry = (csum < w); - csum += carry; -- word++; - } while (word != stop); - - return csum_fold(csum); -@@ -214,73 +218,6 @@ static inline __sum16 ip_compute_csum(co - return csum_fold(csum_partial(buff, len, 0)); - } - --#define _HAVE_ARCH_IPV6_CSUM --static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, -- const struct in6_addr *daddr, -- __u32 len, __u8 proto, -- __wsum sum) --{ -- __wsum tmp; -- -- __asm__( -- " .set push # csum_ipv6_magic\n" -- " .set noreorder \n" -- " .set noat \n" -- " addu %0, %5 # proto (long in network byte order)\n" -- " sltu $1, %0, %5 \n" -- " addu %0, $1 \n" -- -- " addu %0, %6 # csum\n" -- " sltu $1, %0, %6 \n" -- " lw %1, 0(%2) # four words source address\n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 4(%2) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 8(%2) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 12(%2) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 0(%3) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 4(%3) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 8(%3) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " lw %1, 12(%3) \n" -- " addu %0, $1 \n" -- " addu %0, %1 \n" -- " sltu $1, %0, %1 \n" -- -- " addu %0, $1 # Add final carry\n" -- " .set pop" -- : "=&r" (sum), "=&r" (tmp) -- : "r" (saddr), "r" (daddr), -- "0" (htonl(len)), "r" (htonl(proto)), "r" (sum)); -- -- return csum_fold(sum); --} -- - #include <asm-generic/checksum.h> - #endif /* CONFIG_GENERIC_CSUM */ - ---- a/include/uapi/linux/ip.h -+++ b/include/uapi/linux/ip.h -@@ -103,7 +103,7 @@ struct iphdr { - __be32 saddr; - __be32 daddr; - /*The options start here. */ --}; -+} __attribute__((packed, aligned(2))); - - - struct ip_auth_hdr { ---- a/include/uapi/linux/ipv6.h -+++ b/include/uapi/linux/ipv6.h -@@ -104,7 +104,7 @@ struct ipv6_destopt_hao { - __u8 type; - __u8 length; - struct in6_addr addr; --} __attribute__((packed)); -+} __attribute__((packed, aligned(2))); - - /* - * IPv6 fixed header -@@ -131,7 +131,7 @@ struct ipv6hdr { - - struct in6_addr saddr; - struct in6_addr daddr; --}; -+} __attribute__((packed, aligned(2))); - - - /* index values for the variables in ipv6_devconf */ ---- a/include/uapi/linux/tcp.h -+++ b/include/uapi/linux/tcp.h -@@ -55,7 +55,7 @@ struct tcphdr { - __be16 window; - __sum16 check; - __be16 urg_ptr; --}; -+} __attribute__((packed, aligned(2))); - - /* - * The union cast uses a gcc extension to avoid aliasing problems -@@ -65,7 +65,7 @@ struct tcphdr { - union tcp_word_hdr { - struct tcphdr hdr; - __be32 words[5]; --}; -+} __attribute__((packed, aligned(2))); - - #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) - ---- a/include/uapi/linux/udp.h -+++ b/include/uapi/linux/udp.h -@@ -25,7 +25,7 @@ struct udphdr { - __be16 dest; - __be16 len; - __sum16 check; --}; -+} __attribute__((packed, aligned(2))); - - /* UDP socket options */ - #define UDP_CORK 1 /* Never send partially complete segments */ ---- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c -+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c -@@ -48,8 +48,8 @@ static bool ipv4_pkt_to_tuple(const stru - if (ap == NULL) - return false; - -- tuple->src.u3.ip = ap[0]; -- tuple->dst.u3.ip = ap[1]; -+ tuple->src.u3.ip = net_hdr_word(ap++); -+ tuple->dst.u3.ip = net_hdr_word(ap); - - return true; - } ---- a/include/uapi/linux/icmp.h -+++ b/include/uapi/linux/icmp.h -@@ -82,7 +82,7 @@ struct icmphdr { - } frag; - __u8 reserved[4]; - } un; --}; -+} __attribute__((packed, aligned(2))); - - - /* ---- a/include/uapi/linux/in6.h -+++ b/include/uapi/linux/in6.h -@@ -43,7 +43,7 @@ struct in6_addr { - #define s6_addr16 in6_u.u6_addr16 - #define s6_addr32 in6_u.u6_addr32 - #endif --}; -+} __attribute__((packed, aligned(2))); - #endif /* __UAPI_DEF_IN6_ADDR */ - - #if __UAPI_DEF_SOCKADDR_IN6 ---- a/net/ipv6/tcp_ipv6.c -+++ b/net/ipv6/tcp_ipv6.c -@@ -39,6 +39,7 @@ - #include <linux/ipsec.h> - #include <linux/times.h> - #include <linux/slab.h> -+#include <asm/unaligned.h> - #include <linux/uaccess.h> - #include <linux/ipv6.h> - #include <linux/icmpv6.h> -@@ -819,10 +820,10 @@ static void tcp_v6_send_response(const s - topt = (__be32 *)(t1 + 1); - - if (tsecr) { -- *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | -- (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP); -- *topt++ = htonl(tsval); -- *topt++ = htonl(tsecr); -+ put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | -+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++); -+ put_unaligned_be32(tsval, topt++); -+ put_unaligned_be32(tsecr, topt++); - } - - #ifdef CONFIG_TCP_MD5SIG ---- a/include/linux/ipv6.h -+++ b/include/linux/ipv6.h -@@ -6,6 +6,7 @@ - - #define ipv6_optlen(p) (((p)->hdrlen+1) << 3) - #define ipv6_authlen(p) (((p)->hdrlen+2) << 2) -+ - /* - * This structure contains configuration options per IPv6 link. - */ ---- a/net/ipv6/datagram.c -+++ b/net/ipv6/datagram.c -@@ -486,7 +486,7 @@ int ipv6_recv_error(struct sock *sk, str - ipv6_iface_scope_id(&sin->sin6_addr, - IP6CB(skb)->iif); - } else { -- ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset), -+ ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset), - &sin->sin6_addr); - sin->sin6_scope_id = 0; - } -@@ -835,12 +835,12 @@ int ip6_datagram_send_ctl(struct net *ne - } - - if (fl6->flowlabel&IPV6_FLOWINFO_MASK) { -- if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) { -+ if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) { - err = -EINVAL; - goto exit_f; - } - } -- fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg); -+ fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg)); - break; - - case IPV6_2292HOPOPTS: ---- a/net/ipv6/ip6_gre.c -+++ b/net/ipv6/ip6_gre.c -@@ -400,7 +400,7 @@ static void ip6gre_err(struct sk_buff *s - return; - ipv6h = (const struct ipv6hdr *)skb->data; - greh = (const struct gre_base_hdr *)(skb->data + offset); -- key = key_off ? *(__be32 *)(skb->data + key_off) : 0; -+ key = key_off ? net_hdr_word((__be32 *)(skb->data + key_off)) : 0; - - t = ip6gre_tunnel_lookup(skb->dev, &ipv6h->daddr, &ipv6h->saddr, - key, greh->protocol); ---- a/net/ipv6/exthdrs.c -+++ b/net/ipv6/exthdrs.c -@@ -733,7 +733,7 @@ static bool ipv6_hop_jumbo(struct sk_buf - goto drop; - } - -- pkt_len = ntohl(*(__be32 *)(nh + optoff + 2)); -+ pkt_len = ntohl(net_hdr_word(nh + optoff + 2)); - if (pkt_len <= IPV6_MAXPLEN) { - __IP6_INC_STATS(net, ipv6_skb_idev(skb), - IPSTATS_MIB_INHDRERRORS); ---- a/include/linux/types.h -+++ b/include/linux/types.h -@@ -229,5 +229,11 @@ struct callback_head { - typedef void (*rcu_callback_t)(struct rcu_head *head); - typedef void (*call_rcu_func_t)(struct rcu_head *head, rcu_callback_t func); - -+struct net_hdr_word { -+ u32 words[1]; -+} __attribute__((packed, aligned(2))); -+ -+#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0]) -+ - #endif /* __ASSEMBLY__ */ - #endif /* _LINUX_TYPES_H */ ---- a/net/ipv4/af_inet.c -+++ b/net/ipv4/af_inet.c -@@ -1352,8 +1352,8 @@ struct sk_buff **inet_gro_receive(struct - if (unlikely(ip_fast_csum((u8 *)iph, 5))) - goto out_unlock; - -- id = ntohl(*(__be32 *)&iph->id); -- flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF)); -+ id = ntohl(net_hdr_word(&iph->id)); -+ flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id & ~IP_DF)); - id >>= 16; - - for (p = *head; p; p = p->next) { ---- a/net/ipv4/route.c -+++ b/net/ipv4/route.c -@@ -464,7 +464,7 @@ static struct neighbour *ipv4_neigh_look - else if (skb) - pkey = &ip_hdr(skb)->daddr; - -- n = __ipv4_neigh_lookup(dev, *(__force u32 *)pkey); -+ n = __ipv4_neigh_lookup(dev, net_hdr_word(pkey)); - if (n) - return n; - return neigh_create(&arp_tbl, pkey, dev); ---- a/net/ipv4/tcp_output.c -+++ b/net/ipv4/tcp_output.c -@@ -454,48 +454,53 @@ static void tcp_options_write(__be32 *pt - u16 options = opts->options; /* mungable copy */ - - if (unlikely(OPTION_MD5 & options)) { -- *ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | -- (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | -+ (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG); - /* overload cookie hash location */ - opts->hash_location = (__u8 *)ptr; - ptr += 4; - } - - if (unlikely(opts->mss)) { -- *ptr++ = htonl((TCPOPT_MSS << 24) | -- (TCPOLEN_MSS << 16) | -- opts->mss); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) | -+ opts->mss); - } - - if (likely(OPTION_TS & options)) { - if (unlikely(OPTION_SACK_ADVERTISE & options)) { -- *ptr++ = htonl((TCPOPT_SACK_PERM << 24) | -- (TCPOLEN_SACK_PERM << 16) | -- (TCPOPT_TIMESTAMP << 8) | -- TCPOLEN_TIMESTAMP); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_SACK_PERM << 24) | -+ (TCPOLEN_SACK_PERM << 16) | -+ (TCPOPT_TIMESTAMP << 8) | -+ TCPOLEN_TIMESTAMP); - options &= ~OPTION_SACK_ADVERTISE; - } else { -- *ptr++ = htonl((TCPOPT_NOP << 24) | -- (TCPOPT_NOP << 16) | -- (TCPOPT_TIMESTAMP << 8) | -- TCPOLEN_TIMESTAMP); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | -+ (TCPOPT_NOP << 16) | -+ (TCPOPT_TIMESTAMP << 8) | -+ TCPOLEN_TIMESTAMP); - } -- *ptr++ = htonl(opts->tsval); -- *ptr++ = htonl(opts->tsecr); -+ net_hdr_word(ptr++) = htonl(opts->tsval); -+ net_hdr_word(ptr++) = htonl(opts->tsecr); - } - - if (unlikely(OPTION_SACK_ADVERTISE & options)) { -- *ptr++ = htonl((TCPOPT_NOP << 24) | -- (TCPOPT_NOP << 16) | -- (TCPOPT_SACK_PERM << 8) | -- TCPOLEN_SACK_PERM); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | -+ (TCPOPT_NOP << 16) | -+ (TCPOPT_SACK_PERM << 8) | -+ TCPOLEN_SACK_PERM); - } - - if (unlikely(OPTION_WSCALE & options)) { -- *ptr++ = htonl((TCPOPT_NOP << 24) | -- (TCPOPT_WINDOW << 16) | -- (TCPOLEN_WINDOW << 8) | -- opts->ws); -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | -+ (TCPOPT_WINDOW << 16) | -+ (TCPOLEN_WINDOW << 8) | -+ opts->ws); - } - - if (unlikely(opts->num_sack_blocks)) { -@@ -503,16 +508,17 @@ static void tcp_options_write(__be32 *pt - tp->duplicate_sack : tp->selective_acks; - int this_sack; - -- *ptr++ = htonl((TCPOPT_NOP << 24) | -- (TCPOPT_NOP << 16) | -- (TCPOPT_SACK << 8) | -- (TCPOLEN_SACK_BASE + (opts->num_sack_blocks * -+ net_hdr_word(ptr++) = -+ htonl((TCPOPT_NOP << 24) | -+ (TCPOPT_NOP << 16) | -+ (TCPOPT_SACK << 8) | -+ (TCPOLEN_SACK_BASE + (opts->num_sack_blocks * - TCPOLEN_SACK_PERBLOCK))); - - for (this_sack = 0; this_sack < opts->num_sack_blocks; - ++this_sack) { -- *ptr++ = htonl(sp[this_sack].start_seq); -- *ptr++ = htonl(sp[this_sack].end_seq); -+ net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq); -+ net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq); - } - - tp->rx_opt.dsack = 0; -@@ -525,13 +531,14 @@ static void tcp_options_write(__be32 *pt - - if (foc->exp) { - len = TCPOLEN_EXP_FASTOPEN_BASE + foc->len; -- *ptr = htonl((TCPOPT_EXP << 24) | (len << 16) | -+ net_hdr_word(ptr) = -+ htonl((TCPOPT_EXP << 24) | (len << 16) | - TCPOPT_FASTOPEN_MAGIC); - p += TCPOLEN_EXP_FASTOPEN_BASE; - } else { - len = TCPOLEN_FASTOPEN_BASE + foc->len; -- *p++ = TCPOPT_FASTOPEN; -- *p++ = len; -+ net_hdr_word(p++) = TCPOPT_FASTOPEN; -+ net_hdr_word(p++) = len; - } - - memcpy(p, foc->val, foc->len); ---- a/net/ipv4/igmp.c -+++ b/net/ipv4/igmp.c -@@ -548,7 +548,7 @@ static struct sk_buff *add_grec(struct s - if (!skb) - return NULL; - psrc = skb_put(skb, sizeof(__be32)); -- *psrc = psf->sf_inaddr; -+ net_hdr_word(psrc) = psf->sf_inaddr; - scount++; stotal++; - if ((type == IGMPV3_ALLOW_NEW_SOURCES || - type == IGMPV3_BLOCK_OLD_SOURCES) && psf->sf_crcount) { ---- a/include/uapi/linux/igmp.h -+++ b/include/uapi/linux/igmp.h -@@ -33,7 +33,7 @@ struct igmphdr { - __u8 code; /* For newer IGMP */ - __sum16 csum; - __be32 group; --}; -+} __attribute__((packed, aligned(2))); - - /* V3 group record types [grec_type] */ - #define IGMPV3_MODE_IS_INCLUDE 1 -@@ -49,7 +49,7 @@ struct igmpv3_grec { - __be16 grec_nsrcs; - __be32 grec_mca; - __be32 grec_src[0]; --}; -+} __attribute__((packed, aligned(2))); - - struct igmpv3_report { - __u8 type; -@@ -58,7 +58,7 @@ struct igmpv3_report { - __be16 resv2; - __be16 ngrec; - struct igmpv3_grec grec[0]; --}; -+} __attribute__((packed, aligned(2))); - - struct igmpv3_query { - __u8 type; -@@ -79,7 +79,7 @@ struct igmpv3_query { - __u8 qqic; - __be16 nsrcs; - __be32 srcs[0]; --}; -+} __attribute__((packed, aligned(2))); - - #define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */ - #define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */ ---- a/net/core/flow_dissector.c -+++ b/net/core/flow_dissector.c -@@ -109,7 +109,7 @@ __be32 __skb_flow_get_ports(const struct - ports = __skb_header_pointer(skb, thoff + poff, - sizeof(_ports), data, hlen, &_ports); - if (ports) -- return *ports; -+ return (__be32)net_hdr_word(ports); - } - - return 0; ---- a/include/uapi/linux/icmpv6.h -+++ b/include/uapi/linux/icmpv6.h -@@ -77,7 +77,7 @@ struct icmp6hdr { - #define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other - #define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime - #define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref --}; -+} __attribute__((packed, aligned(2))); - - - #define ICMPV6_ROUTER_PREF_LOW 0x3 ---- a/include/net/ndisc.h -+++ b/include/net/ndisc.h -@@ -89,7 +89,7 @@ struct ra_msg { - struct icmp6hdr icmph; - __be32 reachable_time; - __be32 retrans_timer; --}; -+} __attribute__((packed, aligned(2))); - - struct rd_msg { - struct icmp6hdr icmph; -@@ -368,10 +368,10 @@ static inline u32 ndisc_hashfn(const voi - { - const u32 *p32 = pkey; - -- return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) + -- (p32[1] * hash_rnd[1]) + -- (p32[2] * hash_rnd[2]) + -- (p32[3] * hash_rnd[3])); -+ return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) + -+ (net_hdr_word(&p32[1]) * hash_rnd[1]) + -+ (net_hdr_word(&p32[2]) * hash_rnd[2]) + -+ (net_hdr_word(&p32[3]) * hash_rnd[3])); - } - - static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey) ---- a/net/sched/cls_u32.c -+++ b/net/sched/cls_u32.c -@@ -165,7 +165,7 @@ next_knode: - data = skb_header_pointer(skb, toff, 4, &hdata); - if (!data) - goto out; -- if ((*data ^ key->val) & key->mask) { -+ if ((net_hdr_word(data) ^ key->val) & key->mask) { - n = rcu_dereference_bh(n->next); - goto next_knode; - } -@@ -218,8 +218,8 @@ check_terminal: - &hdata); - if (!data) - goto out; -- sel = ht->divisor & u32_hash_fold(*data, &n->sel, -- n->fshift); -+ sel = ht->divisor & u32_hash_fold(net_hdr_word(data), -+ &n->sel, n->fshift); - } - if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT))) - goto next_ht; ---- a/net/ipv6/ip6_offload.c -+++ b/net/ipv6/ip6_offload.c -@@ -221,7 +221,7 @@ static struct sk_buff **ipv6_gro_receive - continue; - - iph2 = (struct ipv6hdr *)(p->data + off); -- first_word = *(__be32 *)iph ^ *(__be32 *)iph2; -+ first_word = net_hdr_word(iph) ^ net_hdr_word(iph2); - - /* All fields must match except length and Traffic Class. - * XXX skbs on the gro_list have all been parsed and pulled ---- a/include/net/addrconf.h -+++ b/include/net/addrconf.h -@@ -47,7 +47,7 @@ struct prefix_info { - __be32 reserved2; - - struct in6_addr prefix; --}; -+} __attribute__((packed, aligned(2))); - - #include <linux/netdevice.h> - #include <net/if_inet6.h> ---- a/include/net/inet_ecn.h -+++ b/include/net/inet_ecn.h -@@ -125,9 +125,9 @@ static inline int IP6_ECN_set_ce(struct - if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph))) - return 0; - -- from = *(__be32 *)iph; -+ from = net_hdr_word(iph); - to = from | htonl(INET_ECN_CE << 20); -- *(__be32 *)iph = to; -+ net_hdr_word(iph) = to; - if (skb->ip_summed == CHECKSUM_COMPLETE) - skb->csum = csum_add(csum_sub(skb->csum, (__force __wsum)from), - (__force __wsum)to); -@@ -136,7 +136,7 @@ static inline int IP6_ECN_set_ce(struct - - static inline void IP6_ECN_clear(struct ipv6hdr *iph) - { -- *(__be32*)iph &= ~htonl(INET_ECN_MASK << 20); -+ net_hdr_word(iph) &= ~htonl(INET_ECN_MASK << 20); - } - - static inline void ipv6_copy_dscp(unsigned int dscp, struct ipv6hdr *inner) ---- a/include/net/ipv6.h -+++ b/include/net/ipv6.h -@@ -108,7 +108,7 @@ struct frag_hdr { - __u8 reserved; - __be16 frag_off; - __be32 identification; --}; -+} __attribute__((packed, aligned(2))); - - #define IP6_MF 0x0001 - #define IP6_OFFSET 0xFFF8 -@@ -437,8 +437,8 @@ static inline void __ipv6_addr_set_half( - } - #endif - #endif -- addr[0] = wh; -- addr[1] = wl; -+ net_hdr_word(&addr[0]) = wh; -+ net_hdr_word(&addr[1]) = wl; - } - - static inline void ipv6_addr_set(struct in6_addr *addr, -@@ -497,6 +497,8 @@ static inline bool ipv6_prefix_equal(con - const __be32 *a1 = addr1->s6_addr32; - const __be32 *a2 = addr2->s6_addr32; - unsigned int pdw, pbi; -+ /* Used for last <32-bit fraction of prefix */ -+ u32 pbia1, pbia2; - - /* check complete u32 in prefix */ - pdw = prefixlen >> 5; -@@ -505,7 +507,9 @@ static inline bool ipv6_prefix_equal(con - - /* check incomplete u32 in prefix */ - pbi = prefixlen & 0x1f; -- if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi)))) -+ pbia1 = net_hdr_word(&a1[pdw]); -+ pbia2 = net_hdr_word(&a2[pdw]); -+ if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi)))) - return false; - - return true; -@@ -605,13 +609,13 @@ static inline void ipv6_addr_set_v4mappe - */ - static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen) - { -- const __be32 *a1 = token1, *a2 = token2; -+ const struct in6_addr *a1 = token1, *a2 = token2; - int i; - - addrlen >>= 2; - - for (i = 0; i < addrlen; i++) { -- __be32 xb = a1[i] ^ a2[i]; -+ __be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i]; - if (xb) - return i * 32 + 31 - __fls(ntohl(xb)); - } -@@ -780,17 +784,18 @@ static inline int ip6_default_np_autolab - static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass, - __be32 flowlabel) - { -- *(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel; -+ net_hdr_word((__be32 *)hdr) = -+ htonl(0x60000000 | (tclass << 20)) | flowlabel; - } - - static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr) - { -- return *(__be32 *)hdr & IPV6_FLOWINFO_MASK; -+ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK; - } - - static inline __be32 ip6_flowlabel(const struct ipv6hdr *hdr) - { -- return *(__be32 *)hdr & IPV6_FLOWLABEL_MASK; -+ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWLABEL_MASK; - } - - static inline u8 ip6_tclass(__be32 flowinfo) ---- a/include/net/secure_seq.h -+++ b/include/net/secure_seq.h -@@ -3,6 +3,7 @@ - #define _NET_SECURE_SEQ - - #include <linux/types.h> -+#include <linux/in6.h> - - u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport); - u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr, ---- a/include/uapi/linux/in.h -+++ b/include/uapi/linux/in.h -@@ -84,7 +84,7 @@ enum { - /* Internet address. */ - struct in_addr { - __be32 s_addr; --}; -+} __attribute__((packed, aligned(2))); - #endif - - #define IP_TOS 1 ---- a/net/ipv6/ip6_fib.c -+++ b/net/ipv6/ip6_fib.c -@@ -137,7 +137,7 @@ static __be32 addr_bit_set(const void *t - * See include/asm-generic/bitops/le.h. - */ - return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) & -- addr[fn_bit >> 5]; -+ net_hdr_word(&addr[fn_bit >> 5]); - } - - static struct fib6_node *node_alloc(void) ---- a/net/netfilter/nf_conntrack_proto_tcp.c -+++ b/net/netfilter/nf_conntrack_proto_tcp.c -@@ -447,7 +447,7 @@ static void tcp_sack(const struct sk_buf - - /* Fast path for timestamp-only option */ - if (length == TCPOLEN_TSTAMP_ALIGNED -- && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24) -+ && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24) - | (TCPOPT_NOP << 16) - | (TCPOPT_TIMESTAMP << 8) - | TCPOLEN_TIMESTAMP)) ---- a/net/xfrm/xfrm_input.c -+++ b/net/xfrm/xfrm_input.c -@@ -193,8 +193,8 @@ int xfrm_parse_spi(struct sk_buff *skb, - if (!pskb_may_pull(skb, hlen)) - return -EINVAL; - -- *spi = *(__be32 *)(skb_transport_header(skb) + offset); -- *seq = *(__be32 *)(skb_transport_header(skb) + offset_seq); -+ *spi = net_hdr_word(skb_transport_header(skb) + offset); -+ *seq = net_hdr_word(skb_transport_header(skb) + offset_seq); - return 0; - } - EXPORT_SYMBOL(xfrm_parse_spi); ---- a/net/ipv4/tcp_input.c -+++ b/net/ipv4/tcp_input.c -@@ -3879,14 +3879,16 @@ static bool tcp_parse_aligned_timestamp( - { - const __be32 *ptr = (const __be32 *)(th + 1); - -- if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) -- | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) { -+ if (net_hdr_word(ptr) == -+ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | -+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) { - tp->rx_opt.saw_tstamp = 1; - ++ptr; -- tp->rx_opt.rcv_tsval = ntohl(*ptr); -+ tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr); - ++ptr; -- if (*ptr) -- tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset; -+ if (net_hdr_word(ptr)) -+ tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) - -+ tp->tsoffset; - else - tp->rx_opt.rcv_tsecr = 0; - return true; ---- a/include/uapi/linux/if_pppox.h -+++ b/include/uapi/linux/if_pppox.h -@@ -51,6 +51,7 @@ struct pppoe_addr { - */ - struct pptp_addr { - __u16 call_id; -+ __u16 pad; - struct in_addr sin_addr; - }; - ---- a/net/ipv6/netfilter/nf_log_ipv6.c -+++ b/net/ipv6/netfilter/nf_log_ipv6.c -@@ -66,9 +66,9 @@ static void dump_ipv6_packet(struct nf_l - /* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */ - nf_log_buf_add(m, "LEN=%zu TC=%u HOPLIMIT=%u FLOWLBL=%u ", - ntohs(ih->payload_len) + sizeof(struct ipv6hdr), -- (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20, -+ (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20, - ih->hop_limit, -- (ntohl(*(__be32 *)ih) & 0x000fffff)); -+ (ntohl(net_hdr_word(ih)) & 0x000fffff)); - - fragment = 0; - ptr = ip6hoff + sizeof(struct ipv6hdr); ---- a/include/net/neighbour.h -+++ b/include/net/neighbour.h -@@ -265,8 +265,10 @@ static inline bool neigh_key_eq128(const - const u32 *n32 = (const u32 *)n->primary_key; - const u32 *p32 = pkey; - -- return ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) | -- (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0; -+ return ((n32[0] ^ net_hdr_word(&p32[0])) | -+ (n32[1] ^ net_hdr_word(&p32[1])) | -+ (n32[2] ^ net_hdr_word(&p32[2])) | -+ (n32[3] ^ net_hdr_word(&p32[3]))) == 0; - } - - static inline struct neighbour *___neigh_lookup_noref( ---- a/include/uapi/linux/netfilter_arp/arp_tables.h -+++ b/include/uapi/linux/netfilter_arp/arp_tables.h -@@ -70,7 +70,7 @@ struct arpt_arp { - __u8 flags; - /* Inverse flags */ - __u16 invflags; --}; -+} __attribute__((aligned(4))); - - /* Values for "flag" field in struct arpt_ip (general arp structure). - * No flags defined yet. ---- a/net/core/utils.c -+++ b/net/core/utils.c -@@ -441,8 +441,14 @@ void inet_proto_csum_replace16(__sum16 * - bool pseudohdr) - { - __be32 diff[] = { -- ~from[0], ~from[1], ~from[2], ~from[3], -- to[0], to[1], to[2], to[3], -+ ~net_hdr_word(&from[0]), -+ ~net_hdr_word(&from[1]), -+ ~net_hdr_word(&from[2]), -+ ~net_hdr_word(&from[3]), -+ net_hdr_word(&to[0]), -+ net_hdr_word(&to[1]), -+ net_hdr_word(&to[2]), -+ net_hdr_word(&to[3]), - }; - if (skb->ip_summed != CHECKSUM_PARTIAL) { - *sum = csum_fold(csum_partial(diff, sizeof(diff), ---- a/drivers/net/vxlan.c -+++ b/drivers/net/vxlan.c -@@ -1872,15 +1872,15 @@ static int vxlan_build_skb(struct sk_buf - return err; - - vxh = __skb_push(skb, sizeof(*vxh)); -- vxh->vx_flags = VXLAN_HF_VNI; -- vxh->vx_vni = vxlan_vni_field(vni); -+ net_hdr_word(&vxh->vx_flags) = VXLAN_HF_VNI; -+ net_hdr_word(&vxh->vx_vni) = vxlan_vni_field(vni); - - if (type & SKB_GSO_TUNNEL_REMCSUM) { - unsigned int start; - - start = skb_checksum_start_offset(skb) - sizeof(struct vxlanhdr); -- vxh->vx_vni |= vxlan_compute_rco(start, skb->csum_offset); -- vxh->vx_flags |= VXLAN_HF_RCO; -+ net_hdr_word(&vxh->vx_vni) |= vxlan_compute_rco(start, skb->csum_offset); -+ net_hdr_word(&vxh->vx_flags) |= VXLAN_HF_RCO; - - if (!skb_is_gso(skb)) { - skb->ip_summed = CHECKSUM_NONE; ---- a/include/linux/etherdevice.h -+++ b/include/linux/etherdevice.h -@@ -480,7 +480,7 @@ static inline bool is_etherdev_addr(cons - * @b: Pointer to Ethernet header - * - * Compare two Ethernet headers, returns 0 if equal. -- * This assumes that the network header (i.e., IP header) is 4-byte -+ * This assumes that the network header (i.e., IP header) is 2-byte - * aligned OR the platform can handle unaligned access. This is the - * case for all packets coming into netif_receive_skb or similar - * entry points. -@@ -503,11 +503,12 @@ static inline unsigned long compare_ethe - fold |= *(unsigned long *)(a + 6) ^ *(unsigned long *)(b + 6); - return fold; - #else -- u32 *a32 = (u32 *)((u8 *)a + 2); -- u32 *b32 = (u32 *)((u8 *)b + 2); -+ const u16 *a16 = a; -+ const u16 *b16 = b; - -- return (*(u16 *)a ^ *(u16 *)b) | (a32[0] ^ b32[0]) | -- (a32[1] ^ b32[1]) | (a32[2] ^ b32[2]); -+ return (a16[0] ^ b16[0]) | (a16[1] ^ b16[1]) | (a16[2] ^ b16[2]) | -+ (a16[3] ^ b16[3]) | (a16[4] ^ b16[4]) | (a16[5] ^ b16[5]) | -+ (a16[6] ^ b16[6]); - #endif - } - ---- a/net/ipv4/tcp_offload.c -+++ b/net/ipv4/tcp_offload.c -@@ -226,7 +226,7 @@ struct sk_buff **tcp_gro_receive(struct - - th2 = tcp_hdr(p); - -- if (*(u32 *)&th->source ^ *(u32 *)&th2->source) { -+ if (net_hdr_word(&th->source) ^ net_hdr_word(&th2->source)) { - NAPI_GRO_CB(p)->same_flow = 0; - continue; - } -@@ -244,8 +244,8 @@ found: - ~(TCP_FLAG_CWR | TCP_FLAG_FIN | TCP_FLAG_PSH)); - flush |= (__force int)(th->ack_seq ^ th2->ack_seq); - for (i = sizeof(*th); i < thlen; i += 4) -- flush |= *(u32 *)((u8 *)th + i) ^ -- *(u32 *)((u8 *)th2 + i); -+ flush |= net_hdr_word((u8 *)th + i) ^ -+ net_hdr_word((u8 *)th2 + i); - - /* When we receive our second frame we can made a decision on if we - * continue this flow as an atomic flow with a fixed ID or if we use ---- a/net/ipv6/netfilter/ip6table_mangle.c -+++ b/net/ipv6/netfilter/ip6table_mangle.c -@@ -50,7 +50,7 @@ ip6t_mangle_out(struct sk_buff *skb, con - hop_limit = ipv6_hdr(skb)->hop_limit; - - /* flowlabel and prio (includes version, which shouldn't change either */ -- flowlabel = *((u_int32_t *)ipv6_hdr(skb)); -+ flowlabel = net_hdr_word(ipv6_hdr(skb)); - - ret = ip6t_do_table(skb, state, state->net->ipv6.ip6table_mangle); - -@@ -59,7 +59,7 @@ ip6t_mangle_out(struct sk_buff *skb, con - !ipv6_addr_equal(&ipv6_hdr(skb)->daddr, &daddr) || - skb->mark != mark || - ipv6_hdr(skb)->hop_limit != hop_limit || -- flowlabel != *((u_int32_t *)ipv6_hdr(skb)))) { -+ flowlabel != net_hdr_word(ipv6_hdr(skb)))) { - err = ip6_route_me_harder(state->net, skb); - if (err < 0) - ret = NF_DROP_ERR(err); diff --git a/target/linux/ar71xx/patches-4.14/920-usb-chipidea-AR933x-platform-support.patch b/target/linux/ar71xx/patches-4.14/920-usb-chipidea-AR933x-platform-support.patch deleted file mode 100644 index b0e69af9c1..0000000000 --- a/target/linux/ar71xx/patches-4.14/920-usb-chipidea-AR933x-platform-support.patch +++ /dev/null @@ -1,124 +0,0 @@ ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -659,6 +659,7 @@ - - #define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18) - #define AR933X_BOOTSTRAP_EEPBUSY BIT(4) -+#define AR933X_BOOTSTRAP_USB_MODE_HOST BIT(3) - #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) - - #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) -@@ -688,6 +689,8 @@ - - #define QCA956X_BOOTSTRAP_REF_CLK_40 BIT(2) - -+#define AR933X_USB_CONFIG_HOST_ONLY BIT(8) -+ - #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) - #define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1) - #define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2) ---- a/arch/mips/ath79/dev-usb.c -+++ b/arch/mips/ath79/dev-usb.c -@@ -19,6 +19,9 @@ - #include <linux/platform_device.h> - #include <linux/usb/ehci_pdriver.h> - #include <linux/usb/ohci_pdriver.h> -+#include <linux/usb/otg.h> -+#include <linux/usb/chipidea.h> -+#include <linux/usb/usb_phy_generic.h> - - #include <asm/mach-ath79/ath79.h> - #include <asm/mach-ath79/ar71xx_regs.h> -@@ -170,6 +173,44 @@ static void __init ar913x_usb_setup(void - &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); - } - -+static void __init ar9xxx_ci_usb_setup(int bus_id, int irq) -+{ -+ struct ci_hdrc_platform_data ci_pdata; -+ bool host_mode = true; -+ -+ if (soc_is_ar933x()) -+ host_mode = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP) & -+ AR933X_BOOTSTRAP_USB_MODE_HOST; -+ else -+ host_mode = !(ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP) & -+ AR934X_BOOTSTRAP_USB_MODE_DEVICE); -+ -+ if (host_mode) { -+ ath79_usb_register("ehci-platform", bus_id, -+ AR934X_EHCI_BASE, AR934X_EHCI_SIZE, -+ irq, &ath79_ehci_pdata_v2, -+ sizeof(ath79_ehci_pdata_v2)); -+ -+ return; -+ } -+ -+ memset(&ci_pdata, 0, sizeof(ci_pdata)); -+ ci_pdata.name = "ci_hdrc_ar9xxx"; -+ ci_pdata.capoffset = DEF_CAPOFFSET; -+ ci_pdata.dr_mode = USB_DR_MODE_PERIPHERAL; -+ ci_pdata.flags = CI_HDRC_DUAL_ROLE_NOT_OTG | CI_HDRC_DP_ALWAYS_PULLUP; -+ ci_pdata.vbus_extcon.edev = ERR_PTR(-ENODEV); -+ ci_pdata.id_extcon.edev = ERR_PTR(-ENODEV); -+ ci_pdata.itc_setting = 1; -+ -+ platform_device_register_simple("usb_phy_generic", -+ PLATFORM_DEVID_AUTO, NULL, 0); -+ -+ ath79_usb_register("ci_hdrc", -1, -+ AR934X_EHCI_BASE, AR934X_EHCI_SIZE, -+ irq, &ci_pdata, sizeof(ci_pdata)); -+} -+ - static void __init ar933x_usb_setup(void) - { - ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE); -@@ -181,10 +222,7 @@ static void __init ar933x_usb_setup(void - ath79_device_reset_clear(AR933X_RESET_USB_PHY); - mdelay(10); - -- ath79_usb_register("ehci-platform", -1, -- AR933X_EHCI_BASE, AR933X_EHCI_SIZE, -- ATH79_CPU_IRQ(3), -- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); -+ ar9xxx_ci_usb_setup(-1, ATH79_CPU_IRQ(3)); - } - - static void enable_tx_tx_idp_violation_fix(unsigned base) -@@ -230,10 +268,7 @@ static void __init ar934x_usb_setup(void - if (ath79_soc_rev >= 3) - ath79_ehci_pdata_v2.reset_notifier = ar934x_usb_reset_notifier; - -- ath79_usb_register("ehci-platform", -1, -- AR934X_EHCI_BASE, AR934X_EHCI_SIZE, -- ATH79_CPU_IRQ(3), -- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); -+ ar9xxx_ci_usb_setup(-1, ATH79_CPU_IRQ(3)); - } - - static void __init qca953x_usb_setup(void) -@@ -254,10 +289,7 @@ static void __init qca953x_usb_setup(voi - ath79_device_reset_clear(QCA953X_RESET_USB_HOST); - udelay(1000); - -- ath79_usb_register("ehci-platform", -1, -- QCA953X_EHCI_BASE, QCA953X_EHCI_SIZE, -- ATH79_CPU_IRQ(3), -- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); -+ ar9xxx_ci_usb_setup(-1, ATH79_CPU_IRQ(3)); - } - - static void qca955x_usb_reset_notifier(struct platform_device *pdev) -@@ -285,10 +317,7 @@ static void __init qca955x_usb_setup(voi - { - ath79_ehci_pdata_v2.reset_notifier = qca955x_usb_reset_notifier; - -- ath79_usb_register("ehci-platform", 0, -- QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE, -- ATH79_IP3_IRQ(0), -- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); -+ ar9xxx_ci_usb_setup(0, ATH79_IP3_IRQ(0)); - - ath79_usb_register("ehci-platform", 1, - QCA955X_EHCI1_BASE, QCA955X_EHCI_SIZE, diff --git a/target/linux/ar71xx/patches-4.14/921-MIPS-ath79-add-even-more-register-defines-for-QCA956x-SoC.patch b/target/linux/ar71xx/patches-4.14/921-MIPS-ath79-add-even-more-register-defines-for-QCA956x-SoC.patch deleted file mode 100644 index a4608ea48d..0000000000 --- a/target/linux/ar71xx/patches-4.14/921-MIPS-ath79-add-even-more-register-defines-for-QCA956x-SoC.patch +++ /dev/null @@ -1,194 +0,0 @@ -Add more registers for QCA955x and QCA956x. - ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -175,6 +175,35 @@ - /* - * Hidden Registers - */ -+#define QCA956X_MAC_CFG_BASE 0xb9000000 -+#define QCA956X_MAC_CFG_SIZE 0x64 -+ -+#define QCA956X_MAC_CFG1_REG 0x00 -+#define QCA956X_MAC_CFG1_SOFT_RST BIT(31) -+#define QCA956X_MAC_CFG1_RX_RST BIT(19) -+#define QCA956X_MAC_CFG1_TX_RST BIT(18) -+#define QCA956X_MAC_CFG1_LOOPBACK BIT(8) -+#define QCA956X_MAC_CFG1_RX_EN BIT(2) -+#define QCA956X_MAC_CFG1_TX_EN BIT(0) -+ -+#define QCA956X_MAC_CFG2_REG 0x04 -+#define QCA956X_MAC_CFG2_IF_1000 BIT(9) -+#define QCA956X_MAC_CFG2_IF_10_100 BIT(8) -+#define QCA956X_MAC_CFG2_HUGE_FRAME_EN BIT(5) -+#define QCA956X_MAC_CFG2_LEN_CHECK BIT(4) -+#define QCA956X_MAC_CFG2_PAD_CRC_EN BIT(2) -+#define QCA956X_MAC_CFG2_FDX BIT(0) -+ -+#define QCA956X_MAC_MII_MGMT_CFG_REG 0x20 -+#define QCA956X_MGMT_CFG_CLK_DIV_20 0x07 -+ -+#define QCA956X_MAC_FIFO_CFG0_REG 0x48 -+#define QCA956X_MAC_FIFO_CFG1_REG 0x4c -+#define QCA956X_MAC_FIFO_CFG2_REG 0x50 -+#define QCA956X_MAC_FIFO_CFG3_REG 0x54 -+#define QCA956X_MAC_FIFO_CFG4_REG 0x58 -+#define QCA956X_MAC_FIFO_CFG5_REG 0x5c -+ - #define QCA956X_DAM_RESET_OFFSET 0xb90001bc - #define QCA956X_DAM_RESET_SIZE 0x4 - #define QCA956X_INLINE_CHKSUM_ENG BIT(27) -@@ -384,6 +413,7 @@ - #define QCA955X_PLL_CLK_CTRL_REG 0x08 - #define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28 - #define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48 -+#define QCA955X_PLL_ETH_SGMII_SERDES_REG 0x4c - - #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 - #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f -@@ -416,12 +446,18 @@ - #define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) - #define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) - -+#define QCA955X_PLL_ETH_SGMII_SERDES_LOCK_DETECT BIT(2) -+#define QCA955X_PLL_ETH_SGMII_SERDES_PLL_REFCLK BIT(1) -+#define QCA955X_PLL_ETH_SGMII_SERDES_EN_PLL BIT(0) -+ - #define QCA956X_PLL_CPU_CONFIG_REG 0x00 - #define QCA956X_PLL_CPU_CONFIG1_REG 0x04 - #define QCA956X_PLL_DDR_CONFIG_REG 0x08 - #define QCA956X_PLL_DDR_CONFIG1_REG 0x0c - #define QCA956X_PLL_CLK_CTRL_REG 0x10 -+#define QCA956X_PLL_SWITCH_CLOCK_CONTROL_REG 0x28 - #define QCA956X_PLL_ETH_XMII_CONTROL_REG 0x30 -+#define QCA956X_PLL_ETH_SGMII_SERDES_REG 0x4c - - #define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 - #define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f -@@ -460,6 +496,31 @@ - #define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL BIT(21) - #define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) - -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_I2C_CLK_SELB BIT(5) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_1 BIT(6) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_UART1_CLK_SEL BIT(7) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_USB_REFCLK_FREQ_SEL_SHIFT 8 -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_USB_REFCLK_FREQ_SEL_MASK 0xf -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_EN_PLL_TOP BIT(12) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_2 BIT(13) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL1_1 BIT(14) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL1_2 BIT(15) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_SWITCH_FUNC_TST_MODE BIT(16) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_EEE_ENABLE BIT(17) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_OEN_CLK125M_PLL BIT(18) -+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_SWITCHCLK_SEL BIT(19) -+ -+#define QCA956X_PLL_ETH_XMII_TX_INVERT BIT(1) -+#define QCA956X_PLL_ETH_XMII_GIGE BIT(25) -+#define QCA956X_PLL_ETH_XMII_RX_DELAY_SHIFT 28 -+#define QCA956X_PLL_ETH_XMII_RX_DELAY_MASK 0x3 -+#define QCA956X_PLL_ETH_XMII_TX_DELAY_SHIFT 26 -+#define QCA956X_PLL_ETH_XMII_TX_DELAY_MASK 3 -+ -+#define QCA956X_PLL_ETH_SGMII_SERDES_LOCK_DETECT BIT(2) -+#define QCA956X_PLL_ETH_SGMII_SERDES_PLL_REFCLK BIT(1) -+#define QCA956X_PLL_ETH_SGMII_SERDES_EN_PLL BIT(0) -+ - /* - * USB_CONFIG block - */ -@@ -657,6 +718,25 @@ - #define QCA955X_RESET_MBOX BIT(1) - #define QCA955X_RESET_I2S BIT(0) - -+#define QCA956X_RESET_EXTERNAL BIT(28) -+#define QCA956X_RESET_FULL_CHIP BIT(24) -+#define QCA956X_RESET_GE1_MDIO BIT(23) -+#define QCA956X_RESET_GE0_MDIO BIT(22) -+#define QCA956X_RESET_CPU_NMI BIT(21) -+#define QCA956X_RESET_CPU_COLD BIT(20) -+#define QCA956X_RESET_DMA BIT(19) -+#define QCA956X_RESET_DDR BIT(16) -+#define QCA956X_RESET_GE1_MAC BIT(13) -+#define QCA956X_RESET_SGMII_ANALOG BIT(12) -+#define QCA956X_RESET_USB_PHY_ANALOG BIT(11) -+#define QCA956X_RESET_GE0_MAC BIT(9) -+#define QCA956X_RESET_SGMII BIT(8) -+#define QCA956X_RESET_USB_HOST BIT(5) -+#define QCA956X_RESET_USB_PHY BIT(4) -+#define QCA956X_RESET_USBSUS_OVERRIDE BIT(3) -+#define QCA956X_RESET_SWITCH_ANALOG BIT(2) -+#define QCA956X_RESET_SWITCH BIT(0) -+ - #define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18) - #define AR933X_BOOTSTRAP_EEPBUSY BIT(4) - #define AR933X_BOOTSTRAP_USB_MODE_HOST BIT(3) -@@ -1189,6 +1269,7 @@ - */ - - #define QCA955X_GMAC_REG_ETH_CFG 0x00 -+#define QCA955X_GMAC_REG_SGMII_SERDES 0x18 - - #define QCA955X_ETH_CFG_RGMII_EN BIT(0) - #define QCA955X_ETH_CFG_MII_GE0 BIT(1) -@@ -1210,16 +1291,58 @@ - #define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3 - #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20 - -+#define QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15) -+#define QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23 -+#define QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf - /* - * QCA956X GMAC Interface - */ - --#define QCA956X_GMAC_REG_ETH_CFG 0x00 -+#define QCA956X_GMAC_REG_ETH_CFG 0x00 -+#define QCA956X_GMAC_REG_SGMII_RESET 0x14 -+#define QCA956X_GMAC_REG_SGMII_SERDES 0x18 -+#define QCA956X_GMAC_REG_MR_AN_CONTROL 0x1c -+#define QCA956X_GMAC_REG_SGMII_CONFIG 0x34 -+#define QCA956X_GMAC_REG_SGMII_DEBUG 0x58 - -+#define QCA956X_ETH_CFG_RGMII_EN BIT(0) -+#define QCA956X_ETH_CFG_GE0_SGMII BIT(6) - #define QCA956X_ETH_CFG_SW_ONLY_MODE BIT(7) --#define QCA956X_ETH_CFG_SW_PHY_SWAP BIT(8) -+#define QCA956X_ETH_CFG_SW_PHY_SWAP BIT(8) - #define QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(9) - #define QCA956X_ETH_CFG_SW_APB_ACCESS BIT(10) - #define QCA956X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) -+#define QCA956X_ETH_CFG_RXD_DELAY_MASK 0x3 -+#define QCA956X_ETH_CFG_RXD_DELAY_SHIFT 14 -+#define QCA956X_ETH_CFG_RDV_DELAY_MASK 0x3 -+#define QCA956X_ETH_CFG_RDV_DELAY_SHIFT 16 -+ -+#define QCA956X_SGMII_RESET_RX_CLK_N_RESET 0x0 -+#define QCA956X_SGMII_RESET_RX_CLK_N BIT(0) -+#define QCA956X_SGMII_RESET_TX_CLK_N BIT(1) -+#define QCA956X_SGMII_RESET_RX_125M_N BIT(2) -+#define QCA956X_SGMII_RESET_TX_125M_N BIT(3) -+#define QCA956X_SGMII_RESET_HW_RX_125M_N BIT(4) -+ -+#define QCA956X_SGMII_SERDES_CDR_BW_MASK 0x3 -+#define QCA956X_SGMII_SERDES_CDR_BW_SHIFT 1 -+#define QCA956X_SGMII_SERDES_TX_DR_CTRL_MASK 0x7 -+#define QCA956X_SGMII_SERDES_TX_DR_CTRL_SHIFT 4 -+#define QCA956X_SGMII_SERDES_PLL_BW BIT(8) -+#define QCA956X_SGMII_SERDES_VCO_FAST BIT(9) -+#define QCA956X_SGMII_SERDES_VCO_SLOW BIT(10) -+#define QCA956X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15) -+#define QCA956X_SGMII_SERDES_EN_SIGNAL_DETECT BIT(16) -+#define QCA956X_SGMII_SERDES_FIBER_SDO BIT(17) -+#define QCA956X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23 -+#define QCA956X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf -+#define QCA956X_SGMII_SERDES_VCO_REG_SHIFT 27 -+#define QCA956X_SGMII_SERDES_VCO_REG_MASK 0xf -+ -+#define QCA956X_MR_AN_CONTROL_AN_ENABLE BIT(12) -+#define QCA956X_MR_AN_CONTROL_PHY_RESET BIT(15) -+ -+#define QCA956X_SGMII_CONFIG_MODE_CTRL_SHIFT 0 -+#define QCA956X_SGMII_CONFIG_MODE_CTRL_MASK 0x7 - - #endif /* __ASM_MACH_AR71XX_REGS_H */ diff --git a/target/linux/ar71xx/patches-4.14/930-chipidea-pullup.patch b/target/linux/ar71xx/patches-4.14/930-chipidea-pullup.patch deleted file mode 100644 index 2e9a878630..0000000000 --- a/target/linux/ar71xx/patches-4.14/930-chipidea-pullup.patch +++ /dev/null @@ -1,72 +0,0 @@ ---- a/drivers/usb/chipidea/ci.h -+++ b/drivers/usb/chipidea/ci.h -@@ -205,6 +205,7 @@ struct hw_bank { - * @in_lpm: if the core in low power mode - * @wakeup_int: if wakeup interrupt occur - * @rev: The revision number for controller -+ * @dp_always_pullup: keep dp always pullup at device mode - */ - struct ci_hdrc { - struct device *dev; -@@ -259,6 +260,7 @@ struct ci_hdrc { - bool in_lpm; - bool wakeup_int; - enum ci_revision rev; -+ bool dp_always_pullup; - }; - - static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci) ---- a/drivers/usb/chipidea/core.c -+++ b/drivers/usb/chipidea/core.c -@@ -818,7 +818,7 @@ static inline void ci_role_destroy(struc - { - ci_hdrc_gadget_destroy(ci); - ci_hdrc_host_destroy(ci); -- if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) -+ if (!ci->dp_always_pullup && ci->roles[CI_ROLE_GADGET]) - ci_hdrc_otg_destroy(ci); - } - -@@ -923,6 +923,9 @@ static int ci_hdrc_probe(struct platform - CI_HDRC_SUPPORTS_RUNTIME_PM); - platform_set_drvdata(pdev, ci); - -+ ci->dp_always_pullup = !!(ci->platdata->flags & -+ CI_HDRC_DP_ALWAYS_PULLUP); -+ - ret = hw_device_init(ci, base); - if (ret < 0) { - dev_err(dev, "can't initialize hardware\n"); -@@ -1011,7 +1014,7 @@ static int ci_hdrc_probe(struct platform - goto deinit_gadget; - } - -- if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) { -+ if (!ci->dp_always_pullup && ci->roles[CI_ROLE_GADGET]) { - ret = ci_hdrc_otg_init(ci); - if (ret) { - dev_err(dev, "init otg fails, ret = %d\n", ret); ---- a/drivers/usb/chipidea/otg.c -+++ b/drivers/usb/chipidea/otg.c -@@ -131,8 +131,10 @@ enum ci_role ci_otg_role(struct ci_hdrc - - void ci_handle_vbus_change(struct ci_hdrc *ci) - { -- if (!ci->is_otg) -+ if (ci->dp_always_pullup) { -+ usb_gadget_vbus_connect(&ci->gadget); - return; -+ } - - if (hw_read_otgsc(ci, OTGSC_BSV) && !ci->vbus_active) - usb_gadget_vbus_connect(&ci->gadget); ---- a/include/linux/usb/chipidea.h -+++ b/include/linux/usb/chipidea.h -@@ -60,6 +60,7 @@ struct ci_hdrc_platform_data { - #define CI_HDRC_OVERRIDE_RX_BURST BIT(11) - #define CI_HDRC_OVERRIDE_PHY_CONTROL BIT(12) /* Glue layer manages phy */ - #define CI_HDRC_REQUIRES_ALIGNED_DMA BIT(13) -+#define CI_HDRC_DP_ALWAYS_PULLUP BIT(14) - enum usb_dr_mode dr_mode; - #define CI_HDRC_CONTROLLER_RESET_EVENT 0 - #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1 diff --git a/target/linux/ar71xx/patches-4.14/940-qca955x-add-more-registers.patch b/target/linux/ar71xx/patches-4.14/940-qca955x-add-more-registers.patch deleted file mode 100644 index ff72308465..0000000000 --- a/target/linux/ar71xx/patches-4.14/940-qca955x-add-more-registers.patch +++ /dev/null @@ -1,42 +0,0 @@ ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -134,7 +134,7 @@ - #define QCA955X_PCI_CTRL_SIZE 0x100 - - #define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) --#define QCA955X_GMAC_SIZE 0x40 -+#define QCA955X_GMAC_SIZE 0x64 - #define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) - #define QCA955X_WMAC_SIZE 0x20000 - #define QCA955X_EHCI0_BASE 0x1b000000 -@@ -1269,7 +1269,11 @@ - */ - - #define QCA955X_GMAC_REG_ETH_CFG 0x00 -+#define QCA955X_GMAC_REG_SGMII_RESET 0x14 - #define QCA955X_GMAC_REG_SGMII_SERDES 0x18 -+#define QCA955X_GMAC_REG_MR_AN_CONTROL 0x1c -+#define QCA955X_GMAC_REG_MR_AN_STATUS 0x20 -+#define QCA955X_GMAC_REG_SGMII_DEBUG 0x58 - - #define QCA955X_ETH_CFG_RGMII_EN BIT(0) - #define QCA955X_ETH_CFG_MII_GE0 BIT(1) -@@ -1291,6 +1295,18 @@ - #define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3 - #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20 - -+#define QCA955X_SGMII_RESET_RX_CLK_N_RESET 0x0 -+#define QCA955X_SGMII_RESET_RX_CLK_N BIT(0) -+#define QCA955X_SGMII_RESET_TX_CLK_N BIT(1) -+#define QCA955X_SGMII_RESET_RX_125M_N BIT(2) -+#define QCA955X_SGMII_RESET_TX_125M_N BIT(3) -+#define QCA955X_SGMII_RESET_HW_RX_125M_N BIT(4) -+ -+#define QCA955X_MR_AN_CONTROL_PHY_RESET BIT(15) -+#define QCA955X_MR_AN_CONTROL_AN_ENABLE BIT(12) -+ -+#define QCA955X_MR_AN_STATUS_AN_ABILITY BIT(3) -+ - #define QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15) - #define QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23 - #define QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf diff --git a/target/linux/ar71xx/patches-4.14/950-add-boardinfo-platform-data.patch b/target/linux/ar71xx/patches-4.14/950-add-boardinfo-platform-data.patch deleted file mode 100644 index edeac838d9..0000000000 --- a/target/linux/ar71xx/patches-4.14/950-add-boardinfo-platform-data.patch +++ /dev/null @@ -1,67 +0,0 @@ ---- a/drivers/net/phy/mdio-boardinfo.c -+++ b/drivers/net/phy/mdio-boardinfo.c -@@ -15,8 +15,11 @@ - - #include "mdio-boardinfo.h" - --static LIST_HEAD(mdio_board_list); --static DEFINE_MUTEX(mdio_board_lock); -+LIST_HEAD(mdio_board_list); -+EXPORT_SYMBOL_GPL(mdio_board_list); -+ -+DEFINE_MUTEX(mdio_board_lock); -+EXPORT_SYMBOL_GPL(mdio_board_lock); - - /** - * mdiobus_setup_mdiodev_from_board_info - create and setup MDIO devices ---- a/drivers/net/phy/mdio-boardinfo.h -+++ b/drivers/net/phy/mdio-boardinfo.h -@@ -20,4 +20,7 @@ void mdiobus_setup_mdiodev_from_board_in - (struct mii_bus *bus, - struct mdio_board_info *bi)); - -+extern struct mutex mdio_board_lock; -+extern struct list_head mdio_board_list; -+ - #endif /* __MDIO_BOARD_INFO_H */ ---- a/drivers/net/phy/mdio_bus.c -+++ b/drivers/net/phy/mdio_bus.c -@@ -455,6 +455,17 @@ void mdiobus_free(struct mii_bus *bus) - } - EXPORT_SYMBOL(mdiobus_free); - -+static void mdiobus_setup_phydev_from_boardinfo(struct mii_bus *bus, -+ struct phy_device *phydev, -+ struct mdio_board_info *bi) -+{ -+ if (strcmp(bus->id, bi->bus_id) || -+ bi->mdio_addr != phydev->mdio.addr) -+ return; -+ -+ phydev->mdio.dev.platform_data = (void *) bi->platform_data; -+} -+ - /** - * mdiobus_scan - scan a bus for MDIO devices. - * @bus: mii_bus to scan -@@ -470,6 +481,7 @@ EXPORT_SYMBOL(mdiobus_free); - struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr) - { - struct phy_device *phydev; -+ struct mdio_board_entry *be; - int err; - - phydev = get_phy_device(bus, addr, false); -@@ -482,6 +494,12 @@ struct phy_device *mdiobus_scan(struct m - */ - of_mdiobus_link_mdiodev(bus, &phydev->mdio); - -+ mutex_lock(&mdio_board_lock); -+ list_for_each_entry(be, &mdio_board_list, list) -+ mdiobus_setup_phydev_from_boardinfo(bus, phydev, -+ &be->board_info); -+ mutex_unlock(&mdio_board_lock); -+ - err = phy_device_register(phydev); - if (err) { - phy_device_free(phydev); diff --git a/target/linux/ar71xx/patches-4.14/952-qca955x-enable-ddr-wb-flush.patch b/target/linux/ar71xx/patches-4.14/952-qca955x-enable-ddr-wb-flush.patch deleted file mode 100644 index 16d17b8a0e..0000000000 --- a/target/linux/ar71xx/patches-4.14/952-qca955x-enable-ddr-wb-flush.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/arch/mips/ath79/common.c -+++ b/arch/mips/ath79/common.c -@@ -49,6 +49,8 @@ void ath79_ddr_ctrl_init(void) - if (soc_is_ar913x() || soc_is_ar724x() || soc_is_ar933x()) { - ath79_ddr_wb_flush_base = ath79_ddr_base + 0x7c; - ath79_ddr_pci_win_base = 0; -+ } else if (soc_is_qca953x() || soc_is_qca955x()) { -+ ath79_ddr_wb_flush_base = ath79_ddr_base + 0x9c; - } else { - ath79_ddr_wb_flush_base = ath79_ddr_base + 0x9c; - ath79_ddr_pci_win_base = ath79_ddr_base + 0x7c; ---- a/arch/mips/ath79/irq.c -+++ b/arch/mips/ath79/irq.c -@@ -105,12 +105,12 @@ static void qca955x_ip2_irq_dispatch(str - } - - if (status & QCA955X_EXT_INT_PCIE_RC1_ALL) { -- /* TODO: flush DDR? */ -+ ath79_ddr_wb_flush(3); - generic_handle_irq(ATH79_IP2_IRQ(0)); - } - - if (status & QCA955X_EXT_INT_WMAC_ALL) { -- /* TODO: flush DDR? */ -+ ath79_ddr_wb_flush(4); - generic_handle_irq(ATH79_IP2_IRQ(1)); - } - } -@@ -130,17 +130,17 @@ static void qca955x_ip3_irq_dispatch(str - } - - if (status & QCA955X_EXT_INT_USB1) { -- /* TODO: flush DDR? */ -+ ath79_ddr_wb_flush(2); - generic_handle_irq(ATH79_IP3_IRQ(0)); - } - - if (status & QCA955X_EXT_INT_USB2) { -- /* TODO: flush DDR? */ -+ ath79_ddr_wb_flush(2); - generic_handle_irq(ATH79_IP3_IRQ(1)); - } - - if (status & QCA955X_EXT_INT_PCIE_RC2_ALL) { -- /* TODO: flush DDR? */ -+ ath79_ddr_wb_flush(3); - generic_handle_irq(ATH79_IP3_IRQ(2)); - } - } diff --git a/target/linux/ar71xx/patches-4.14/953-qca955x-pci-reset-fixes.patch b/target/linux/ar71xx/patches-4.14/953-qca955x-pci-reset-fixes.patch deleted file mode 100644 index 0acca2a08f..0000000000 --- a/target/linux/ar71xx/patches-4.14/953-qca955x-pci-reset-fixes.patch +++ /dev/null @@ -1,120 +0,0 @@ ---- a/arch/mips/ath79/common.c -+++ b/arch/mips/ath79/common.c -@@ -153,6 +153,24 @@ void ath79_device_reset_clear(u32 mask) - } - EXPORT_SYMBOL_GPL(ath79_device_reset_clear); - -+void ath79_device_reset2_clear(u32 mask) -+{ -+ unsigned long flags; -+ u32 reg; -+ u32 t; -+ -+ if (soc_is_qca955x()) -+ reg = QCA955X_RESET_REG_RESET2_MODULE; -+ else -+ panic("Reset register not defined for this SOC"); -+ -+ spin_lock_irqsave(&ath79_device_reset_lock, flags); -+ t = ath79_reset_rr(reg); -+ ath79_reset_wr(reg, t & ~mask); -+ spin_unlock_irqrestore(&ath79_device_reset_lock, flags); -+} -+EXPORT_SYMBOL_GPL(ath79_device_reset2_clear); -+ - u32 ath79_device_reset_get(u32 mask) - { - unsigned long flags; ---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h -@@ -411,6 +411,7 @@ - #define QCA955X_PLL_CPU_CONFIG_REG 0x00 - #define QCA955X_PLL_DDR_CONFIG_REG 0x04 - #define QCA955X_PLL_CLK_CTRL_REG 0x08 -+#define QCA955X_PLL_PCIE_CONFIG_REG 0x0c - #define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28 - #define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48 - #define QCA955X_PLL_ETH_SGMII_SERDES_REG 0x4c -@@ -565,6 +566,7 @@ - #define QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac - - #define QCA955X_RESET_REG_RESET_MODULE 0x1c -+#define QCA955X_RESET_REG_RESET2_MODULE 0xc4 - #define QCA955X_RESET_REG_BOOTSTRAP 0xb0 - #define QCA955X_RESET_REG_EXT_INT_STATUS 0xac - ---- a/arch/mips/include/asm/mach-ath79/ath79.h -+++ b/arch/mips/include/asm/mach-ath79/ath79.h -@@ -178,6 +178,7 @@ static inline u32 ath79_reset_rr(unsigne - - void ath79_device_reset_set(u32 mask); - void ath79_device_reset_clear(u32 mask); -+void ath79_device_reset2_clear(u32 mask); - u32 ath79_device_reset_get(u32 mask); - - void ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3); ---- a/arch/mips/pci/pci-ar724x.c -+++ b/arch/mips/pci/pci-ar724x.c -@@ -335,18 +335,37 @@ static void ar724x_pci_hw_init(struct ar - int wait = 0; - - /* deassert PCIe host controller and PCIe PHY reset */ -- ath79_device_reset_clear(AR724X_RESET_PCIE); -- ath79_device_reset_clear(AR724X_RESET_PCIE_PHY); -+ if (soc_is_qca955x()) { -+ ath79_device_reset_clear(QCA955X_RESET_PCIE); -+ mdelay(10); -+ ath79_device_reset_clear(QCA955X_RESET_PCIE_PHY); -+ mdelay(10); -+ ath79_device_reset2_clear(QCA955X_RESET_PCIE); -+ mdelay(10); -+ ath79_device_reset2_clear(QCA955X_RESET_PCIE_PHY); -+ mdelay(10); -+ } else { -+ ath79_device_reset_clear(AR724X_RESET_PCIE); -+ ath79_device_reset_clear(AR724X_RESET_PCIE_PHY); -+ } - - /* remove the reset of the PCIE PLL */ -- ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG); -- ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET; -- ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl); -+ if (!soc_is_qca955x()) { -+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG); -+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET; -+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl); -+ } - - /* deassert bypass for the PCIE PLL */ -- ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG); -- ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS; -- ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl); -+ if (soc_is_qca955x()) { -+ ppl = ath79_pll_rr(QCA955X_PLL_PCIE_CONFIG_REG); -+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS; -+ ath79_pll_wr(QCA955X_PLL_PCIE_CONFIG_REG, ppl); -+ } else { -+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG); -+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS; -+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl); -+ } - - /* set PCIE Application Control to ready */ - app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP); -@@ -422,8 +441,14 @@ static int ar724x_pci_probe(struct platf - * Do the full PCIE Root Complex Initialization Sequence if the PCIe - * host controller is in reset. - */ -- if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE) -- ar724x_pci_hw_init(apc); -+ if (soc_is_qca955x()) { -+ if (ath79_reset_rr(QCA955X_RESET_REG_RESET_MODULE) & QCA955X_RESET_PCIE || -+ ath79_reset_rr(QCA955X_RESET_REG_RESET2_MODULE) & QCA955X_RESET_PCIE) -+ ar724x_pci_hw_init(apc); -+ } else { -+ if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE) -+ ar724x_pci_hw_init(apc); -+ } - - apc->link_up = ar724x_pci_check_link(apc); - if (!apc->link_up) diff --git a/target/linux/ar71xx/patches-4.14/955-qca953x-fix-potential-missing-irq-dispatch.patch b/target/linux/ar71xx/patches-4.14/955-qca953x-fix-potential-missing-irq-dispatch.patch deleted file mode 100644 index 5174029989..0000000000 --- a/target/linux/ar71xx/patches-4.14/955-qca953x-fix-potential-missing-irq-dispatch.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/arch/mips/ath79/irq.c -+++ b/arch/mips/ath79/irq.c -@@ -69,15 +69,21 @@ static void qca953x_ip2_irq_dispatch(str - u32 status; - - status = ath79_reset_rr(QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS); -+ status &= QCA953X_PCIE_WMAC_INT_PCIE_ALL | QCA953X_PCIE_WMAC_INT_WMAC_ALL; -+ -+ if (status == 0) { -+ spurious_interrupt(); -+ return; -+ } - - if (status & QCA953X_PCIE_WMAC_INT_PCIE_ALL) { - ath79_ddr_wb_flush(3); - generic_handle_irq(ATH79_IP2_IRQ(0)); -- } else if (status & QCA953X_PCIE_WMAC_INT_WMAC_ALL) { -+ } -+ -+ if (status & QCA953X_PCIE_WMAC_INT_WMAC_ALL) { - ath79_ddr_wb_flush(4); - generic_handle_irq(ATH79_IP2_IRQ(1)); -- } else { -- spurious_interrupt(); - } - } - diff --git a/target/linux/ar71xx/tiny/config-default b/target/linux/ar71xx/tiny/config-default deleted file mode 100644 index 1148d8c451..0000000000 --- a/target/linux/ar71xx/tiny/config-default +++ /dev/null @@ -1,76 +0,0 @@ -CONFIG_ATH79_DEV_AP9X_PCI=y -CONFIG_ATH79_DEV_DSA=y -CONFIG_ATH79_DEV_ETH=y -CONFIG_ATH79_DEV_GPIO_BUTTONS=y -CONFIG_ATH79_DEV_LEDS_GPIO=y -CONFIG_ATH79_DEV_M25P80=y -# CONFIG_ATH79_DEV_NFC is not set -CONFIG_ATH79_DEV_SPI=y -CONFIG_ATH79_DEV_USB=y -CONFIG_ATH79_DEV_WMAC=y -CONFIG_ATH79_MACH_BHR_4GRV2=y -CONFIG_ATH79_MACH_DIR_600_A1=y -CONFIG_ATH79_MACH_DIR_615_C1=y -CONFIG_ATH79_MACH_DIR_615_I1=y -CONFIG_ATH79_MACH_ENS202EXT=y -CONFIG_ATH79_MACH_F9K1115V2=y -CONFIG_ATH79_MACH_NBG460N=y -CONFIG_ATH79_MACH_TEW_632BRP=y -CONFIG_ATH79_MACH_TEW_712BR=y -CONFIG_ATH79_MACH_TL_MR11U=y -CONFIG_ATH79_MACH_TL_MR13U=y -CONFIG_ATH79_MACH_TL_MR3020=y -CONFIG_ATH79_MACH_TL_MR3X20=y -CONFIG_ATH79_MACH_TL_WA701ND_V2=y -CONFIG_ATH79_MACH_TL_WA7210N_V2=y -CONFIG_ATH79_MACH_TL_WA801ND_V3=y -CONFIG_ATH79_MACH_TL_WA830RE_V2=y -CONFIG_ATH79_MACH_TL_WA850RE_V2=y -CONFIG_ATH79_MACH_TL_WA855RE_V1=y -CONFIG_ATH79_MACH_TL_WA901ND=y -CONFIG_ATH79_MACH_TL_WA901ND_V2=y -CONFIG_ATH79_MACH_TL_WA901ND_V4=y -CONFIG_ATH79_MACH_TL_WAX50RE=y -CONFIG_ATH79_MACH_TL_WDR3320_V2=y -CONFIG_ATH79_MACH_TL_WDR3500=y -CONFIG_ATH79_MACH_TL_WR1041N_V2=y -CONFIG_ATH79_MACH_TL_WR703N=y -CONFIG_ATH79_MACH_TL_WR720N_V3=y -CONFIG_ATH79_MACH_TL_WR741ND=y -CONFIG_ATH79_MACH_TL_WR741ND_V4=y -CONFIG_ATH79_MACH_TL_WR802N_V1=y -CONFIG_ATH79_MACH_TL_WR802N_V2=y -CONFIG_ATH79_MACH_TL_WR840N_V2=y -CONFIG_ATH79_MACH_TL_WR841N_V1=y -CONFIG_ATH79_MACH_TL_WR841N_V8=y -CONFIG_ATH79_MACH_TL_WR841N_V9=y -CONFIG_ATH79_MACH_TL_WR940N_V4=y -CONFIG_ATH79_MACH_TL_WR941ND=y -CONFIG_ATH79_MACH_TL_WR941ND_V6=y -CONFIG_ATH79_MACH_WHR_HP_G300N=y -CONFIG_ATH79_MACH_WLAE_AG300N=y -CONFIG_ATH79_MACH_WNR2000=y -CONFIG_ATH79_MACH_WNR2000_V3=y -CONFIG_ATH79_MACH_WNR2000_V4=y -CONFIG_ATH79_MACH_WP543=y -CONFIG_ATH79_MACH_WPE72=y -CONFIG_ATH79_MACH_ZBT_WE1526=y -CONFIG_ATH79_NVRAM=y -CONFIG_ATH79_PCI_ATH9K_FIXUP=y -CONFIG_BLK_MQ_PCI=y -CONFIG_HW_HAS_PCI=y -CONFIG_MYLOADER=y -CONFIG_PCI=y -CONFIG_PCI_AR724X=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_SERIAL_AR933X=y -CONFIG_SERIAL_AR933X_CONSOLE=y -CONFIG_SERIAL_AR933X_NR_UARTS=2 -CONFIG_SOC_AR71XX=y -CONFIG_SOC_AR724X=y -CONFIG_SOC_AR913X=y -CONFIG_SOC_AR933X=y -CONFIG_SOC_AR934X=y -CONFIG_SOC_QCA953X=y -CONFIG_SOC_QCA956X=y diff --git a/target/linux/ar71xx/tiny/profiles/00-default.mk b/target/linux/ar71xx/tiny/profiles/00-default.mk deleted file mode 100644 index edddeb3bf6..0000000000 --- a/target/linux/ar71xx/tiny/profiles/00-default.mk +++ /dev/null @@ -1,11 +0,0 @@ -define Profile/Default - NAME:=Default Profile (all drivers) - PACKAGES:= \ - kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport - PRIORITY := 1 -endef - -define Profile/Default/Description - Default package set compatible with most boards. -endef -$(eval $(call Profile,Default)) diff --git a/target/linux/ar71xx/tiny/target.mk b/target/linux/ar71xx/tiny/target.mk deleted file mode 100644 index 89d4447e1e..0000000000 --- a/target/linux/ar71xx/tiny/target.mk +++ /dev/null @@ -1,10 +0,0 @@ -BOARDNAME:=Devices with small flash -FEATURES += squashfs small_flash - -DEFAULT_PACKAGES += wpad-mini - -define Target/Description - Build firmware images for Atheros AR71xx/AR913x/AR934x based boards with small NOR flash. -endef - - |