aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ar71xx')
-rw-r--r--target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c33
1 files changed, 23 insertions, 10 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c
index 25eb26a6f6..2393e60b16 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c
@@ -1,7 +1,7 @@
/*
* D-Link DIR-825 rev. B1 board support
*
- * Copyright (C) 2009 Lukas Kuna, Evkanet, s.r.o.
+ * Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o.
*
* based on mach-wndr3700.c
*
@@ -45,8 +45,8 @@
#define DIR825B1_CAL_LOCATION_0 0x1f661000
#define DIR825B1_CAL_LOCATION_1 0x1f665000
-#define DIR825B1_MAC_LOCATION_0 0x2ffa81b8
-#define DIR825B1_MAC_LOCATION_1 0x2ffa8370
+#define DIR825B1_MAC_LOCATION_0 0x1f66ffa0
+#define DIR825B1_MAC_LOCATION_1 0x1f66ffb4
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition dir825b1_partitions[] = {
@@ -150,20 +150,35 @@ static struct platform_device dir825b1_rtl8366s_device = {
}
};
+static void dir825b1_read_ascii_mac(u8 *dest, unsigned int src_addr)
+{
+ int ret;
+ u8 *src = (u8 *)KSEG1ADDR(src_addr);
+
+ ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+ &dest[0], &dest[1], &dest[2],
+ &dest[3], &dest[4], &dest[5]);
+
+ if (ret != ETH_ALEN) memset(dest, 0, ETH_ALEN);
+}
+
static void __init dir825b1_setup(void)
{
- u8 *mac = (u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_1);
+ u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
+
+ dir825b1_read_ascii_mac(mac1, DIR825B1_MAC_LOCATION_0);
+ dir825b1_read_ascii_mac(mac2, DIR825B1_MAC_LOCATION_1);
ar71xx_add_device_mdio(0x0);
- ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 1);
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 2);
ar71xx_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
- ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 2);
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac1, 3);
ar71xx_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth1_data.phy_mask = 0x10;
@@ -188,10 +203,8 @@ static void __init dir825b1_setup(void)
ap94_pci_setup_wmac_led_pin(0, 5);
ap94_pci_setup_wmac_led_pin(1, 5);
- ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0),
- (u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_0),
- (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1),
- (u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_1));
+ ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0), mac1,
+ (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1), mac2);
}
MIPS_MACHINE(AR71XX_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1",