diff options
Diffstat (limited to 'target/linux/ar71xx')
106 files changed, 8329 insertions, 73 deletions
diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9 new file mode 100644 index 0000000000..c5b89088f1 --- /dev/null +++ b/target/linux/ar71xx/config-4.9 @@ -0,0 +1,485 @@ +CONFIG_AG71XX=y +CONFIG_AG71XX_AR8216_SUPPORT=y +# CONFIG_AG71XX_DEBUG is not set +# CONFIG_AG71XX_DEBUG_FS is not set +CONFIG_AR8216_PHY=y +CONFIG_AR8216_PHY_LEDS=y +CONFIG_ARCH_BINFMT_ELF_STATE=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +# CONFIG_ARCH_HAS_SG_CHAIN is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_AT803X_PHY=y +CONFIG_ATH79=y +CONFIG_ATH79_DEV_AP9X_PCI=y +CONFIG_ATH79_DEV_DSA=y +CONFIG_ATH79_DEV_ETH=y +CONFIG_ATH79_DEV_GPIO_BUTTONS=y +CONFIG_ATH79_DEV_LEDS_GPIO=y +CONFIG_ATH79_DEV_M25P80=y +CONFIG_ATH79_DEV_NFC=y +CONFIG_ATH79_DEV_SPI=y +CONFIG_ATH79_DEV_USB=y +CONFIG_ATH79_DEV_WMAC=y +CONFIG_ATH79_MACH_A60=y +CONFIG_ATH79_MACH_ALFA_AP120C=y +CONFIG_ATH79_MACH_ALFA_AP96=y +CONFIG_ATH79_MACH_ALFA_NX=y +CONFIG_ATH79_MACH_ALL0258N=y +CONFIG_ATH79_MACH_ALL0315N=y +CONFIG_ATH79_MACH_ANTMINER_S1=y +CONFIG_ATH79_MACH_ANTMINER_S3=y +CONFIG_ATH79_MACH_ANTROUTER_R1=y +CONFIG_ATH79_MACH_AP121=y +CONFIG_ATH79_MACH_AP121F=y +CONFIG_ATH79_MACH_AP132=y +CONFIG_ATH79_MACH_AP136=y +CONFIG_ATH79_MACH_AP143=y +CONFIG_ATH79_MACH_AP147=y +CONFIG_ATH79_MACH_AP152=y +CONFIG_ATH79_MACH_AP531B0=y +# CONFIG_ATH79_MACH_AP81 is not set +CONFIG_ATH79_MACH_AP90Q=y +CONFIG_ATH79_MACH_AP96=y +CONFIG_ATH79_MACH_ARCHER_C25_V1=y +CONFIG_ATH79_MACH_ARCHER_C58_V1=y +CONFIG_ATH79_MACH_ARCHER_C59_V1=y +CONFIG_ATH79_MACH_ARCHER_C60_V1=y +CONFIG_ATH79_MACH_ARCHER_C7=y +CONFIG_ATH79_MACH_ARDUINO_YUN=y +CONFIG_ATH79_MACH_AW_NR580=y +CONFIG_ATH79_MACH_BHR_4GRV2=y +CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y +CONFIG_ATH79_MACH_BSB=y +CONFIG_ATH79_MACH_C55=y +# CONFIG_ATH79_MACH_C60 is not set +CONFIG_ATH79_MACH_CAP324=y +CONFIG_ATH79_MACH_CAP4200AG=y +CONFIG_ATH79_MACH_CARAMBOLA2=y +CONFIG_ATH79_MACH_CF_E316N_V2=y +CONFIG_ATH79_MACH_CF_E320N_V2=y +CONFIG_ATH79_MACH_CF_E355AC=y +CONFIG_ATH79_MACH_CF_E380AC_V1=y +CONFIG_ATH79_MACH_CF_E380AC_V2=y +CONFIG_ATH79_MACH_CF_E520N=y +CONFIG_ATH79_MACH_CF_E530N=y +CONFIG_ATH79_MACH_CPE505N=y +CONFIG_ATH79_MACH_CPE510=y +CONFIG_ATH79_MACH_CPE830=y +CONFIG_ATH79_MACH_CPE870=y +CONFIG_ATH79_MACH_CR3000=y +CONFIG_ATH79_MACH_CR5000=y +CONFIG_ATH79_MACH_DAP_2695_A1=y +CONFIG_ATH79_MACH_DB120=y +CONFIG_ATH79_MACH_DGL_5500_A1=y +CONFIG_ATH79_MACH_DHP_1565_A1=y +CONFIG_ATH79_MACH_DIR_505_A1=y +CONFIG_ATH79_MACH_DIR_600_A1=y +CONFIG_ATH79_MACH_DIR_615_C1=y +CONFIG_ATH79_MACH_DIR_615_I1=y +CONFIG_ATH79_MACH_DIR_825_B1=y +CONFIG_ATH79_MACH_DIR_825_C1=y +CONFIG_ATH79_MACH_DIR_869_A1=y +CONFIG_ATH79_MACH_DLAN_HOTSPOT=y +CONFIG_ATH79_MACH_DLAN_PRO_1200_AC=y +CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y +# CONFIG_ATH79_MACH_DOMYWIFI_DW33D is not set +CONFIG_ATH79_MACH_DR344=y +CONFIG_ATH79_MACH_DR531=y +CONFIG_ATH79_MACH_DRAGINO2=y +CONFIG_ATH79_MACH_E2100L=y +CONFIG_ATH79_MACH_EAP120=y +CONFIG_ATH79_MACH_EAP300V2=y +CONFIG_ATH79_MACH_EAP7660D=y +CONFIG_ATH79_MACH_EL_M150=y +CONFIG_ATH79_MACH_EL_MINI=y +CONFIG_ATH79_MACH_ENS202EXT=y +CONFIG_ATH79_MACH_EPG5000=y +CONFIG_ATH79_MACH_ESR1750=y +CONFIG_ATH79_MACH_ESR900=y +CONFIG_ATH79_MACH_EW_DORIN=y +CONFIG_ATH79_MACH_F9K1115V2=y +CONFIG_ATH79_MACH_FRITZ300E=y +CONFIG_ATH79_MACH_GL_AR150=y +CONFIG_ATH79_MACH_GL_AR300=y +CONFIG_ATH79_MACH_GL_AR300M=y +CONFIG_ATH79_MACH_GL_DOMINO=y +CONFIG_ATH79_MACH_GL_INET=y +CONFIG_ATH79_MACH_GL_MIFI=y +CONFIG_ATH79_MACH_GL_USB150=y +CONFIG_ATH79_MACH_GS_MINIBOX_V1=y +CONFIG_ATH79_MACH_GS_OOLITE=y +# CONFIG_ATH79_MACH_HIVEAP_121 is not set +CONFIG_ATH79_MACH_HIWIFI_HC6361=y +CONFIG_ATH79_MACH_HORNET_UB=y +CONFIG_ATH79_MACH_JA76PF=y +CONFIG_ATH79_MACH_JWAP003=y +CONFIG_ATH79_MACH_JWAP230=y +CONFIG_ATH79_MACH_LIMA=y +CONFIG_ATH79_MACH_MC_MAC1200R=y +CONFIG_ATH79_MACH_MR12=y +CONFIG_ATH79_MACH_MR16=y +CONFIG_ATH79_MACH_MR1750=y +# CONFIG_ATH79_MACH_MR18 is not set +CONFIG_ATH79_MACH_MR600=y +CONFIG_ATH79_MACH_MR900=y +CONFIG_ATH79_MACH_MYNET_N600=y +CONFIG_ATH79_MACH_MYNET_N750=y +CONFIG_ATH79_MACH_MYNET_REXT=y +CONFIG_ATH79_MACH_MZK_W04NU=y +CONFIG_ATH79_MACH_MZK_W300NH=y +CONFIG_ATH79_MACH_NBG460N=y +CONFIG_ATH79_MACH_NBG6716=y +CONFIG_ATH79_MACH_OM2P=y +CONFIG_ATH79_MACH_OM5P=y +CONFIG_ATH79_MACH_OM5P_AC=y +CONFIG_ATH79_MACH_OM5P_ACv2=y +CONFIG_ATH79_MACH_OMY_G1=y +CONFIG_ATH79_MACH_OMY_X1=y +CONFIG_ATH79_MACH_ONION_OMEGA=y +CONFIG_ATH79_MACH_PB42=y +CONFIG_ATH79_MACH_PB44=y +CONFIG_ATH79_MACH_PQI_AIR_PEN=y +CONFIG_ATH79_MACH_QIHOO_C301=y +CONFIG_ATH79_MACH_R602N=y +# CONFIG_ATH79_MACH_R6100 is not set +# CONFIG_ATH79_MACH_RAMBUTAN is not set +# CONFIG_ATH79_MACH_RB2011 is not set +# CONFIG_ATH79_MACH_RB4XX is not set +# CONFIG_ATH79_MACH_RB750 is not set +# CONFIG_ATH79_MACH_RB91X is not set +# CONFIG_ATH79_MACH_RB922 is not set +# CONFIG_ATH79_MACH_RB95X is not set +# CONFIG_ATH79_MACH_RBSPI is not set +# CONFIG_ATH79_MACH_RBSXTLITE is not set +CONFIG_ATH79_MACH_RE450=y +CONFIG_ATH79_MACH_RW2458N=y +CONFIG_ATH79_MACH_SC1750=y +CONFIG_ATH79_MACH_SC300M=y +CONFIG_ATH79_MACH_SC450=y +CONFIG_ATH79_MACH_SMART_300=y +CONFIG_ATH79_MACH_SOM9331=y +CONFIG_ATH79_MACH_SR3200=y +CONFIG_ATH79_MACH_TELLSTICK_ZNET_LITE=y +CONFIG_ATH79_MACH_TEW_632BRP=y +CONFIG_ATH79_MACH_TEW_673GRU=y +CONFIG_ATH79_MACH_TEW_712BR=y +CONFIG_ATH79_MACH_TEW_732BR=y +CONFIG_ATH79_MACH_TEW_823DRU=y +CONFIG_ATH79_MACH_TL_MR11U=y +CONFIG_ATH79_MACH_TL_MR13U=y +CONFIG_ATH79_MACH_TL_MR3020=y +CONFIG_ATH79_MACH_TL_MR3X20=y +CONFIG_ATH79_MACH_TL_MR6400=y +CONFIG_ATH79_MACH_TL_WA701ND_V2=y +CONFIG_ATH79_MACH_TL_WA7210N_V2=y +CONFIG_ATH79_MACH_TL_WA801ND_V3=y +CONFIG_ATH79_MACH_TL_WA830RE_V2=y +CONFIG_ATH79_MACH_TL_WA850RE_V2=y +CONFIG_ATH79_MACH_TL_WA855RE_V1=y +CONFIG_ATH79_MACH_TL_WA901ND=y +CONFIG_ATH79_MACH_TL_WA901ND_V2=y +CONFIG_ATH79_MACH_TL_WA901ND_V4=y +CONFIG_ATH79_MACH_TL_WAX50RE=y +CONFIG_ATH79_MACH_TL_WDR3320_V2=y +CONFIG_ATH79_MACH_TL_WDR3500=y +CONFIG_ATH79_MACH_TL_WDR4300=y +CONFIG_ATH79_MACH_TL_WDR6500_V2=y +CONFIG_ATH79_MACH_TL_WPA8630=y +CONFIG_ATH79_MACH_TL_WR1041N_V2=y +CONFIG_ATH79_MACH_TL_WR1043ND=y +CONFIG_ATH79_MACH_TL_WR1043ND_V2=y +CONFIG_ATH79_MACH_TL_WR1043ND_V4=y +CONFIG_ATH79_MACH_TL_WR2543N=y +CONFIG_ATH79_MACH_TL_WR703N=y +CONFIG_ATH79_MACH_TL_WR720N_V3=y +CONFIG_ATH79_MACH_TL_WR741ND=y +CONFIG_ATH79_MACH_TL_WR741ND_V4=y +CONFIG_ATH79_MACH_TL_WR802N_V1=y +CONFIG_ATH79_MACH_TL_WR802N_V2=y +CONFIG_ATH79_MACH_TL_WR810N=y +CONFIG_ATH79_MACH_TL_WR840N_V2=y +CONFIG_ATH79_MACH_TL_WR841N_V1=y +CONFIG_ATH79_MACH_TL_WR841N_V8=y +CONFIG_ATH79_MACH_TL_WR841N_V9=y +CONFIG_ATH79_MACH_TL_WR902AC_V1=y +CONFIG_ATH79_MACH_TL_WR940N_V4=y +CONFIG_ATH79_MACH_TL_WR941ND=y +CONFIG_ATH79_MACH_TL_WR941ND_V6=y +CONFIG_ATH79_MACH_TL_WR942N_V1=y +CONFIG_ATH79_MACH_TUBE2H=y +CONFIG_ATH79_MACH_UBNT=y +CONFIG_ATH79_MACH_UBNT_UNIFIAC=y +CONFIG_ATH79_MACH_UBNT_XM=y +CONFIG_ATH79_MACH_WEIO=y +CONFIG_ATH79_MACH_WHR_HP_G300N=y +CONFIG_ATH79_MACH_WLAE_AG300N=y +CONFIG_ATH79_MACH_WLR8100=y +CONFIG_ATH79_MACH_WNDAP360=y +CONFIG_ATH79_MACH_WNDR3700=y +# CONFIG_ATH79_MACH_WNDR4300 is not set +CONFIG_ATH79_MACH_WNR2000=y +CONFIG_ATH79_MACH_WNR2000_V3=y +CONFIG_ATH79_MACH_WNR2000_V4=y +CONFIG_ATH79_MACH_WNR2200=y +CONFIG_ATH79_MACH_WP543=y +CONFIG_ATH79_MACH_WPE72=y +CONFIG_ATH79_MACH_WPJ342=y +CONFIG_ATH79_MACH_WPJ344=y +CONFIG_ATH79_MACH_WPJ531=y +CONFIG_ATH79_MACH_WPJ558=y +CONFIG_ATH79_MACH_WPJ563=y +CONFIG_ATH79_MACH_WRT160NL=y +CONFIG_ATH79_MACH_WRT400N=y +CONFIG_ATH79_MACH_WRTNODE2Q=y +CONFIG_ATH79_MACH_WZR_450HP2=y +CONFIG_ATH79_MACH_WZR_HP_AG300H=y +CONFIG_ATH79_MACH_WZR_HP_G300NH=y +CONFIG_ATH79_MACH_WZR_HP_G300NH2=y +CONFIG_ATH79_MACH_WZR_HP_G450H=y +CONFIG_ATH79_MACH_XD3200=y +# CONFIG_ATH79_MACH_Z1 is not set +CONFIG_ATH79_MACH_ZBT_WE1526=y +CONFIG_ATH79_MACH_ZCN_1523H=y +CONFIG_ATH79_NVRAM=y +CONFIG_ATH79_PCI_ATH9K_FIXUP=y +# CONFIG_ATH79_ROUTERBOOT is not set +CONFIG_ATH79_WDT=y +CONFIG_BLK_MQ_PCI=y +CONFIG_CEVT_R4K=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="rootfstype=squashfs noinitrd" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_COMMON_CLK=y +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_RIXI=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_CPU_MIPSR2=y +CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_R4K_FPU=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CPU_SUPPORTS_MSA=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DTC=y +CONFIG_EARLY_PRINTK=y +CONFIG_ETHERNET_PACKET_MANGLE=y +CONFIG_FIXED_PHY=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GPIOLIB=y +CONFIG_GPIOLIB_IRQCHIP=y +CONFIG_GPIO_74X164=y +CONFIG_GPIO_ATH79=y +CONFIG_GPIO_GENERIC=y +# CONFIG_GPIO_LATCH is not set +CONFIG_GPIO_NXP_74HC153=y +CONFIG_GPIO_PCF857X=y +CONFIG_GPIO_SYSFS=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +# CONFIG_HAVE_ARCH_BITREVERSE is not set +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_CBPF_JIT=y +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_KVM=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HW_HAS_PCI=y +CONFIG_HZ_PERIODIC=y +CONFIG_I2C=y +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_GPIO=y +CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INITRAMFS_ROOT_GID=0 +CONFIG_INITRAMFS_ROOT_UID=0 +CONFIG_INITRAMFS_SOURCE="../../root" +CONFIG_INTEL_XWAY_PHY=y +CONFIG_IP17XX_PHY=y +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_MIPS_CPU=y +CONFIG_IRQ_WORK=y +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_WNDR3700_USB is not set +CONFIG_LIBFDT=y +CONFIG_MARVELL_PHY=y +CONFIG_MDIO_BITBANG=y +CONFIG_MDIO_BOARDINFO=y +CONFIG_MDIO_GPIO=y +CONFIG_MICREL_PHY=y +CONFIG_MIPS=y +CONFIG_MIPS_ASID_BITS=8 +CONFIG_MIPS_ASID_SHIFT=0 +CONFIG_MIPS_CLOCK_VSYSCALL=y +# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set +# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set +CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y +# CONFIG_MIPS_CMDLINE_FROM_DTB is not set +# CONFIG_MIPS_ELF_APPENDED_DTB is not set +# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_MIPS_MACHINE=y +CONFIG_MIPS_NO_APPENDED_DTB=y +# CONFIG_MIPS_RAW_APPENDED_DTB is not set +CONFIG_MIPS_SPRAM=y +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CYBERTAN_PARTS=y +CONFIG_MTD_M25P80=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +CONFIG_MTD_MYLOADER_PARTS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2 +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPLIT_EVA_FW=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_SPLIT_LZMA_FW=y +CONFIG_MTD_SPLIT_MINOR_FW=y +CONFIG_MTD_SPLIT_SEAMA_FW=y +CONFIG_MTD_SPLIT_TPLINK_FW=y +CONFIG_MTD_SPLIT_UIMAGE_FW=y +CONFIG_MTD_SPLIT_WRGG_FW=y +CONFIG_MTD_TPLINK_PARTS=y +CONFIG_MYLOADER=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NET_DSA=y +CONFIG_NET_DSA_MV88E6060=y +CONFIG_NET_DSA_MV88E6063=y +CONFIG_NET_DSA_TAG_TRAILER=y +CONFIG_NET_SWITCHDEV=y +CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y +# CONFIG_NO_IOPORT_MAP is not set +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_ADDRESS_PCI=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_NET=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_PCI=y +CONFIG_PCI_AR724X=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DRIVERS_LEGACY=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +CONFIG_RATIONAL=y +# CONFIG_RCU_STALL_COMMON is not set +CONFIG_RTL8306_PHY=y +CONFIG_RTL8366RB_PHY=y +CONFIG_RTL8366S_PHY=y +CONFIG_RTL8366_SMI=y +CONFIG_RTL8367_PHY=y +# CONFIG_SCHED_INFO is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SERIAL_8250_FSL is not set +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_AR933X=y +CONFIG_SERIAL_AR933X_CONSOLE=y +CONFIG_SERIAL_AR933X_NR_UARTS=2 +CONFIG_SOC_AR71XX=y +CONFIG_SOC_AR724X=y +CONFIG_SOC_AR913X=y +CONFIG_SOC_AR933X=y +CONFIG_SOC_AR934X=y +CONFIG_SOC_QCA953X=y +CONFIG_SOC_QCA955X=y +CONFIG_SOC_QCA956X=y +CONFIG_SPI=y +CONFIG_SPI_ATH79=y +CONFIG_SPI_BITBANG=y +CONFIG_SPI_GPIO=y +CONFIG_SPI_MASTER=y +# CONFIG_SPI_RB4XX is not set +# CONFIG_SPI_VSC7385 is not set +CONFIG_SRCU=y +CONFIG_SWCONFIG=y +CONFIG_SWCONFIG_LEDS=y +CONFIG_SWPHY=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_MIPS16=y +CONFIG_SYS_SUPPORTS_ZBOOT=y +CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_USB_SUPPORT=y +CONFIG_USE_OF=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-c60.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-c60.c index e78e311d2e..7b01af515b 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-c60.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-c60.c @@ -22,6 +22,7 @@ #include <linux/platform/ar934x_nfc.h> #include <linux/ar8216_platform.h> #include <linux/ath9k_platform.h> +#include <linux/version.h> #include <asm/mach-ath79/ar71xx_regs.h> @@ -119,6 +120,7 @@ static struct mdio_board_info c60_mdio0_info[] = { }, }; +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) static struct nand_ecclayout c60_nand_ecclayout = { .eccbytes = 7, .eccpos = { 4, 8, 9, 10, 13, 14, 15 }, @@ -126,13 +128,67 @@ static struct nand_ecclayout c60_nand_ecclayout = { .oobfree = { { 0, 3 }, { 6, 2 }, { 11, 2 }, } }; +#else + +static int c60_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + switch (section) { + case 0: + oobregion->offset = 4; + oobregion->length = 1; + return 0; + case 1: + oobregion->offset = 8; + oobregion->length = 3; + return 0; + case 2: + oobregion->offset = 13; + oobregion->length = 3; + return 0; + default: + return -ERANGE; + } +} + +static int c60_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + switch (section) { + case 0: + oobregion->offset = 0; + oobregion->length = 3; + return 0; + case 1: + oobregion->offset = 6; + oobregion->length = 2; + return 0; + case 2: + oobregion->offset = 11; + oobregion->length = 2; + return 0; + default: + return -ERANGE; + } +} + +static const struct mtd_ooblayout_ops c60_nand_ecclayout_ops = { + .ecc = c60_ooblayout_ecc, + .free = c60_ooblayout_free, +}; +#endif /* < 4.6 */ + static int c60_nand_scan_fixup(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; chip->ecc.size = 512; chip->ecc.strength = 4; +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) chip->ecc.layout = &c60_nand_ecclayout; +#else + mtd_set_ooblayout(mtd, &c60_nand_ecclayout_ops); +#endif return 0; } diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c index 6e498395bd..9100a5977a 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c @@ -23,6 +23,7 @@ #include <linux/spi/flash.h> #include <linux/routerboot.h> #include <linux/gpio.h> +#include <linux/version.h> #include <asm/prom.h> #include <asm/mach-ath79/ath79.h> @@ -188,6 +189,7 @@ static void rb2011_nand_select_chip(int chip_no) ndelay(500); } +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) static struct nand_ecclayout rb2011_nand_ecclayout = { .eccbytes = 6, .eccpos = { 8, 9, 10, 13, 14, 15 }, @@ -195,16 +197,72 @@ static struct nand_ecclayout rb2011_nand_ecclayout = { .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } }; +#else + +static int rb2011_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + switch (section) { + case 0: + oobregion->offset = 8; + oobregion->length = 3; + return 0; + case 1: + oobregion->offset = 13; + oobregion->length = 3; + return 0; + default: + return -ERANGE; + } +} + +static int rb2011_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + switch (section) { + case 0: + oobregion->offset = 0; + oobregion->length = 4; + return 0; + case 1: + oobregion->offset = 4; + oobregion->length = 1; + return 0; + case 2: + oobregion->offset = 6; + oobregion->length = 2; + return 0; + case 3: + oobregion->offset = 11; + oobregion->length = 2; + return 0; + default: + return -ERANGE; + } +} + +static const struct mtd_ooblayout_ops rb2011_nand_ecclayout_ops = { + .ecc = rb2011_ooblayout_ecc, + .free = rb2011_ooblayout_free, +}; +#endif /* < 4.6 */ + static int rb2011_nand_scan_fixup(struct mtd_info *mtd) { +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) struct nand_chip *chip = mtd->priv; +#endif if (mtd->writesize == 512) { /* * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot * will not be able to find the kernel that we load. */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) chip->ecc.layout = &rb2011_nand_ecclayout; +#else + mtd_set_ooblayout(mtd, &rb2011_nand_ecclayout_ops); +#endif } return 0; diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c index 0c5373c365..577fb0eee0 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c @@ -20,6 +20,7 @@ #include <linux/routerboot.h> #include <linux/gpio.h> #include <linux/platform_data/phy-at803x.h> +#include <linux/version.h> #include <asm/prom.h> #include <asm/mach-ath79/ath79.h> @@ -132,6 +133,7 @@ static void rb922gs_nand_select_chip(int chip_no) ndelay(500); } +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) static struct nand_ecclayout rb922gs_nand_ecclayout = { .eccbytes = 6, .eccpos = { 8, 9, 10, 13, 14, 15 }, @@ -139,16 +141,72 @@ static struct nand_ecclayout rb922gs_nand_ecclayout = { .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } }; +#else + +static int rb922gs_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + switch (section) { + case 0: + oobregion->offset = 8; + oobregion->length = 3; + return 0; + case 1: + oobregion->offset = 13; + oobregion->length = 3; + return 0; + default: + return -ERANGE; + } +} + +static int rb922gs_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + switch (section) { + case 0: + oobregion->offset = 0; + oobregion->length = 4; + return 0; + case 1: + oobregion->offset = 4; + oobregion->length = 1; + return 0; + case 2: + oobregion->offset = 6; + oobregion->length = 2; + return 0; + case 3: + oobregion->offset = 11; + oobregion->length = 2; + return 0; + default: + return -ERANGE; + } +} + +static const struct mtd_ooblayout_ops rb922gs_nand_ecclayout_ops = { + .ecc = rb922gs_ooblayout_ecc, + .free = rb922gs_ooblayout_free, +}; +#endif /* < 4.6 */ + static int rb922gs_nand_scan_fixup(struct mtd_info *mtd) { +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) struct nand_chip *chip = mtd->priv; +#endif if (mtd->writesize == 512) { /* * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot * will not be able to find the kernel that we load. */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) chip->ecc.layout = &rb922gs_nand_ecclayout; +#else + mtd_set_ooblayout(mtd, &rb922gs_nand_ecclayout_ops); +#endif } return 0; diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c index e940d6cc11..9eaeaa7f9d 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c @@ -24,6 +24,7 @@ #include <linux/spi/flash.h> #include <linux/routerboot.h> #include <linux/gpio.h> +#include <linux/version.h> #include <asm/mach-ath79/ath79.h> #include <asm/mach-ath79/ar71xx_regs.h> @@ -146,6 +147,7 @@ static void rb95x_nand_select_chip(int chip_no) ndelay(500); } +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) static struct nand_ecclayout rb95x_nand_ecclayout = { .eccbytes = 6, .eccpos = { 8, 9, 10, 13, 14, 15 }, @@ -153,6 +155,56 @@ static struct nand_ecclayout rb95x_nand_ecclayout = { .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } }; +#else + +static int rb95x_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + switch (section) { + case 0: + oobregion->offset = 8; + oobregion->length = 3; + return 0; + case 1: + oobregion->offset = 13; + oobregion->length = 3; + return 0; + default: + return -ERANGE; + } +} + +static int rb95x_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + switch (section) { + case 0: + oobregion->offset = 0; + oobregion->length = 4; + return 0; + case 1: + oobregion->offset = 4; + oobregion->length = 1; + return 0; + case 2: + oobregion->offset = 6; + oobregion->length = 2; + return 0; + case 3: + oobregion->offset = 11; + oobregion->length = 2; + return 0; + default: + return -ERANGE; + } +} + +static const struct mtd_ooblayout_ops rb95x_nand_ecclayout_ops = { + .ecc = rb95x_ooblayout_ecc, + .free = rb95x_ooblayout_free, +}; +#endif /* < 4.6 */ + static int rb95x_nand_scan_fixup(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; @@ -162,7 +214,11 @@ static int rb95x_nand_scan_fixup(struct mtd_info *mtd) * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot * will not be able to find the kernel that we load. */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) chip->ecc.layout = &rb95x_nand_ecclayout; +#else + mtd_set_ooblayout(mtd, &rb95x_nand_ecclayout_ops); +#endif } chip->options = NAND_NO_SUBPAGE_WRITE; diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbsxtlite.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbsxtlite.c index 62063e06a2..d2edfc9c71 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbsxtlite.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbsxtlite.c @@ -24,6 +24,7 @@ #include <linux/rle.h> #include <linux/routerboot.h> #include <linux/gpio.h> +#include <linux/version.h> #include <asm/mach-ath79/ath79.h> #include <asm/mach-ath79/ar71xx_regs.h> @@ -163,6 +164,7 @@ static void rbsxtlite_nand_select_chip(int chip_no) ndelay(500); } +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) static struct nand_ecclayout rbsxtlite_nand_ecclayout = { .eccbytes = 6, .eccpos = { 8, 9, 10, 13, 14, 15 }, @@ -170,16 +172,72 @@ static struct nand_ecclayout rbsxtlite_nand_ecclayout = { .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } }; +#else + +static int rbsxtlite_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + switch (section) { + case 0: + oobregion->offset = 8; + oobregion->length = 3; + return 0; + case 1: + oobregion->offset = 13; + oobregion->length = 3; + return 0; + default: + return -ERANGE; + } +} + +static int rbsxtlite_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + switch (section) { + case 0: + oobregion->offset = 0; + oobregion->length = 4; + return 0; + case 1: + oobregion->offset = 4; + oobregion->length = 1; + return 0; + case 2: + oobregion->offset = 6; + oobregion->length = 2; + return 0; + case 3: + oobregion->offset = 11; + oobregion->length = 2; + return 0; + default: + return -ERANGE; + } +} + +static const struct mtd_ooblayout_ops rbsxtlite_nand_ecclayout_ops = { + .ecc = rbsxtlite_ooblayout_ecc, + .free = rbsxtlite_ooblayout_free, +}; +#endif /* < 4.6 */ + static int rbsxtlite_nand_scan_fixup(struct mtd_info *mtd) { +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) struct nand_chip *chip = mtd->priv; +#endif if (mtd->writesize == 512) { /* * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot * will not be able to find the kernel that we load. */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) chip->ecc.layout = &rbsxtlite_nand_ecclayout; +#else + mtd_set_ooblayout(mtd, &rbsxtlite_nand_ecclayout_ops); +#endif } return 0; diff --git a/target/linux/ar71xx/files/drivers/gpio/gpio-nxp-74hc153.c b/target/linux/ar71xx/files/drivers/gpio/gpio-nxp-74hc153.c index 8c01efe4a0..1355e3ff6e 100644 --- a/target/linux/ar71xx/files/drivers/gpio/gpio-nxp-74hc153.c +++ b/target/linux/ar71xx/files/drivers/gpio/gpio-nxp-74hc153.c @@ -168,7 +168,11 @@ static int nxp_74hc153_probe(struct platform_device *pdev) gc->base = pdata->gpio_base; gc->ngpio = NXP_74HC153_NUM_GPIOS; gc->label = dev_name(nxp->parent); +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) gc->dev = nxp->parent; +#else + gc->parent = nxp->parent; +#endif gc->owner = THIS_MODULE; err = gpiochip_add(&nxp->gpio_chip); diff --git a/target/linux/ar71xx/files/drivers/mtd/cybertan_part.c b/target/linux/ar71xx/files/drivers/mtd/cybertan_part.c index 391411f8de..4d33c19b7e 100644 --- a/target/linux/ar71xx/files/drivers/mtd/cybertan_part.c +++ b/target/linux/ar71xx/files/drivers/mtd/cybertan_part.c @@ -28,6 +28,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/version.h> struct cybertan_header { char magic[4]; @@ -82,7 +83,11 @@ struct firmware_header { #define NVRAM_LEN 0x10000 static int cybertan_parse_partitions(struct mtd_info *master, +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) struct mtd_partition **pparts, +#else + const struct mtd_partition **pparts, +#endif struct mtd_part_parser_data *data) { struct firmware_header *header; diff --git a/target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c b/target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c index a47fc0468e..a135e0f52f 100644 --- a/target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c +++ b/target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c @@ -18,6 +18,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/slab.h> +#include <linux/version.h> #include <linux/platform/ar934x_nfc.h> @@ -187,7 +188,9 @@ nfc_debug_data(const char *label, void *data, int len) {} #endif /* AR934X_NFC_DEBUG_DATA */ struct ar934x_nfc { +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) struct mtd_info mtd; +#endif struct nand_chip nand_chip; struct device *parent; void __iomem *base; @@ -259,7 +262,22 @@ ar934x_nfc_get_platform_data(struct ar934x_nfc *nfc) static inline struct ar934x_nfc *mtd_to_ar934x_nfc(struct mtd_info *mtd) { +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) return container_of(mtd, struct ar934x_nfc, mtd); +#else + struct nand_chip *chip = mtd_to_nand(mtd); + + return container_of(chip, struct ar934x_nfc, nand_chip); +#endif +} + +static struct mtd_info *ar934x_nfc_to_mtd(struct ar934x_nfc *nfc) +{ +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) + return &nfc->mtd; +#else + return nand_to_mtd(&nfc->nand_chip); +#endif } static inline bool ar934x_nfc_use_irq(struct ar934x_nfc *nfc) @@ -648,7 +666,7 @@ ar934x_nfc_cmdfunc(struct mtd_info *mtd, unsigned int command, int column, int page_addr) { struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd); - struct nand_chip *nand = mtd->priv; + struct nand_chip *nand = &nfc->nand_chip; nfc->read_id = false; if (command != NAND_CMD_PAGEPROG) @@ -1241,6 +1259,7 @@ ar934x_nfc_init_tail(struct mtd_info *mtd) return err; } +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) static struct nand_ecclayout ar934x_nfc_oob_64_hwecc = { .eccbytes = 28, .eccpos = { @@ -1261,19 +1280,60 @@ static struct nand_ecclayout ar934x_nfc_oob_64_hwecc = { }, }; +#else + +static int ar934x_nfc_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->offset = 20; + oobregion->length = 28; + + return 0; +} + +static int ar934x_nfc_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + switch (section) { + case 0: + oobregion->offset = 4; + oobregion->length = 16; + return 0; + case 1: + oobregion->offset = 48; + oobregion->length = 16; + return 0; + default: + return -ERANGE; + } +} + +static const struct mtd_ooblayout_ops ar934x_nfc_ecclayout_ops = { + .ecc = ar934x_nfc_ooblayout_ecc, + .free = ar934x_nfc_ooblayout_free, +}; +#endif /* < 4.6 */ + static int ar934x_nfc_setup_hwecc(struct ar934x_nfc *nfc) { struct nand_chip *nand = &nfc->nand_chip; + struct mtd_info *mtd = ar934x_nfc_to_mtd(nfc); u32 ecc_cap; u32 ecc_thres; +#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0) + struct mtd_oob_region oobregion; +#endif - if (!config_enabled(CONFIG_MTD_NAND_AR934X_HW_ECC)) { + if (!IS_ENABLED(CONFIG_MTD_NAND_AR934X_HW_ECC)) { dev_err(nfc->parent, "hardware ECC support is disabled\n"); return -EINVAL; } - switch (nfc->mtd.writesize) { + switch (mtd->writesize) { case 2048: /* * Writing a subpage separately is not supported, because @@ -1284,17 +1344,25 @@ ar934x_nfc_setup_hwecc(struct ar934x_nfc *nfc) nand->ecc.size = 512; nand->ecc.bytes = 7; nand->ecc.strength = 4; +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) nand->ecc.layout = &ar934x_nfc_oob_64_hwecc; +#else + mtd_set_ooblayout(mtd, &ar934x_nfc_ecclayout_ops); +#endif break; default: dev_err(nfc->parent, "hardware ECC is not available for %d byte pages\n", - nfc->mtd.writesize); + mtd->writesize); return -EINVAL; } +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) BUG_ON(!nand->ecc.layout); +#else + BUG_ON(!mtd->ooblayout->ecc); +#endif switch (nand->ecc.strength) { case 4: @@ -1309,12 +1377,17 @@ ar934x_nfc_setup_hwecc(struct ar934x_nfc *nfc) } nfc->ecc_thres = ecc_thres; +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) nfc->ecc_oob_pos = nand->ecc.layout->eccpos[0]; +#else + mtd->ooblayout->ecc(mtd, 0, &oobregion); + nfc->ecc_oob_pos = oobregion.offset; +#endif nfc->ecc_ctrl_reg = ecc_cap << AR934X_NFC_ECC_CTRL_ECC_CAP_S; nfc->ecc_ctrl_reg |= ecc_thres << AR934X_NFC_ECC_CTRL_ERR_THRES_S; - nfc->ecc_offset_reg = nfc->mtd.writesize + nfc->ecc_oob_pos; + nfc->ecc_offset_reg = mtd->writesize + nfc->ecc_oob_pos; nand->ecc.mode = NAND_ECC_HW; nand->ecc.read_page = ar934x_nfc_read_page; @@ -1382,9 +1455,11 @@ ar934x_nfc_probe(struct platform_device *pdev) nfc->swap_dma = pdata->swap_dma; nand = &nfc->nand_chip; - mtd = &nfc->mtd; + mtd = ar934x_nfc_to_mtd(nfc); +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) mtd->priv = nand; +#endif mtd->owner = THIS_MODULE; if (pdata->name) mtd->name = pdata->name; @@ -1429,10 +1504,18 @@ ar934x_nfc_probe(struct platform_device *pdev) switch (pdata->ecc_mode) { case AR934X_NFC_ECC_SOFT: nand->ecc.mode = NAND_ECC_SOFT; +#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0) + nand->ecc.algo = NAND_ECC_HAMMING; +#endif break; case AR934X_NFC_ECC_SOFT_BCH: +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) nand->ecc.mode = NAND_ECC_SOFT_BCH; +#else + nand->ecc.mode = NAND_ECC_SOFT; + nand->ecc.algo = NAND_ECC_BCH; +#endif break; case AR934X_NFC_ECC_HW: @@ -1474,10 +1557,12 @@ static int ar934x_nfc_remove(struct platform_device *pdev) { struct ar934x_nfc *nfc; + struct mtd_info *mtd; nfc = platform_get_drvdata(pdev); if (nfc) { - nand_release(&nfc->mtd); + mtd = ar934x_nfc_to_mtd(nfc); + nand_release(mtd); ar934x_nfc_free_buf(nfc); free_irq(nfc->irq, nfc); } diff --git a/target/linux/ar71xx/files/drivers/mtd/nand/rb4xx_nand.c b/target/linux/ar71xx/files/drivers/mtd/nand/rb4xx_nand.c index 96ec5dd1e5..b397575f77 100644 --- a/target/linux/ar71xx/files/drivers/mtd/nand/rb4xx_nand.c +++ b/target/linux/ar71xx/files/drivers/mtd/nand/rb4xx_nand.c @@ -23,6 +23,7 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/slab.h> +#include <linux/version.h> #include <asm/mach-ath79/ath79.h> #include <asm/mach-ath79/rb4xx_cpld.h> @@ -41,6 +42,7 @@ struct rb4xx_nand_info { struct mtd_info mtd; }; +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) /* * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader * will not be able to find the kernel that we load. @@ -52,6 +54,56 @@ static struct nand_ecclayout rb4xx_nand_ecclayout = { .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } }; +#else + +static int rb4xx_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + switch (section) { + case 0: + oobregion->offset = 8; + oobregion->length = 3; + return 0; + case 1: + oobregion->offset = 13; + oobregion->length = 3; + return 0; + default: + return -ERANGE; + } +} + +static int rb4xx_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + switch (section) { + case 0: + oobregion->offset = 0; + oobregion->length = 4; + return 0; + case 1: + oobregion->offset = 4; + oobregion->length = 1; + return 0; + case 2: + oobregion->offset = 6; + oobregion->length = 2; + return 0; + case 3: + oobregion->offset = 11; + oobregion->length = 2; + return 0; + default: + return -ERANGE; + } +} + +static const struct mtd_ooblayout_ops rb4xx_nand_ecclayout_ops = { + .ecc = rb4xx_ooblayout_ecc, + .free = rb4xx_ooblayout_free, +}; +#endif /* < 4.6 */ + static struct mtd_partition rb4xx_nand_partitions[] = { { .name = "booter", @@ -229,7 +281,11 @@ static int rb4xx_nand_probe(struct platform_device *pdev) } if (info->mtd.writesize == 512) +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) info->chip.ecc.layout = &rb4xx_nand_ecclayout; +#else + mtd_set_ooblayout(&info->mtd, &rb4xx_nand_ecclayout_ops); +#endif ret = nand_scan_tail(&info->mtd); if (ret) { diff --git a/target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c b/target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c index 0604c5a235..f8a6722cba 100644 --- a/target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c +++ b/target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/version.h> #include <asm/mach-ath79/ar71xx_regs.h> #include <asm/mach-ath79/ath79.h> @@ -49,6 +50,7 @@ static inline struct rb750_nand_info *mtd_to_rbinfo(struct mtd_info *mtd) return container_of(mtd, struct rb750_nand_info, mtd); } +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) /* * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader * will not be able to find the kernel that we load. @@ -60,6 +62,56 @@ static struct nand_ecclayout rb750_nand_ecclayout = { .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } }; +#else + +static int rb750_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + switch (section) { + case 0: + oobregion->offset = 8; + oobregion->length = 3; + return 0; + case 1: + oobregion->offset = 13; + oobregion->length = 3; + return 0; + default: + return -ERANGE; + } +} + +static int rb750_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + switch (section) { + case 0: + oobregion->offset = 0; + oobregion->length = 4; + return 0; + case 1: + oobregion->offset = 4; + oobregion->length = 1; + return 0; + case 2: + oobregion->offset = 6; + oobregion->length = 2; + return 0; + case 3: + oobregion->offset = 11; + oobregion->length = 2; + return 0; + default: + return -ERANGE; + } +} + +static const struct mtd_ooblayout_ops rb750_nand_ecclayout_ops = { + .ecc = rb750_ooblayout_ecc, + .free = rb750_ooblayout_free, +}; +#endif /* < 4.6 */ + static struct mtd_partition rb750_nand_partitions[] = { { .name = "booter", @@ -292,7 +344,11 @@ static int rb750_nand_probe(struct platform_device *pdev) } if (info->mtd.writesize == 512) +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) info->chip.ecc.layout = &rb750_nand_ecclayout; +#else + mtd_set_ooblayout(&info->mtd, &rb750_nand_ecclayout_ops); +#endif ret = nand_scan_tail(&info->mtd); if (ret) { diff --git a/target/linux/ar71xx/files/drivers/mtd/nand/rb91x_nand.c b/target/linux/ar71xx/files/drivers/mtd/nand/rb91x_nand.c index 1308e18ba6..15b1816ae1 100644 --- a/target/linux/ar71xx/files/drivers/mtd/nand/rb91x_nand.c +++ b/target/linux/ar71xx/files/drivers/mtd/nand/rb91x_nand.c @@ -19,6 +19,7 @@ #include <linux/slab.h> #include <linux/gpio.h> #include <linux/platform_data/rb91x_nand.h> +#include <linux/version.h> #include <asm/mach-ath79/ar71xx_regs.h> #include <asm/mach-ath79/ath79.h> @@ -56,6 +57,7 @@ static inline struct rb91x_nand_info *mtd_to_rbinfo(struct mtd_info *mtd) return container_of(mtd, struct rb91x_nand_info, mtd); } +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) /* * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader * will not be able to find the kernel that we load. @@ -67,6 +69,56 @@ static struct nand_ecclayout rb91x_nand_ecclayout = { .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } }; +#else + +static int rb91x_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + switch (section) { + case 0: + oobregion->offset = 8; + oobregion->length = 3; + return 0; + case 1: + oobregion->offset = 13; + oobregion->length = 3; + return 0; + default: + return -ERANGE; + } +} + +static int rb91x_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + switch (section) { + case 0: + oobregion->offset = 0; + oobregion->length = 4; + return 0; + case 1: + oobregion->offset = 4; + oobregion->length = 1; + return 0; + case 2: + oobregion->offset = 6; + oobregion->length = 2; + return 0; + case 3: + oobregion->offset = 11; + oobregion->length = 2; + return 0; + default: + return -ERANGE; + } +} + +static const struct mtd_ooblayout_ops rb91x_nand_ecclayout_ops = { + .ecc = rb91x_ooblayout_ecc, + .free = rb91x_ooblayout_free, +}; +#endif /* < 4.6 */ + static struct mtd_partition rb91x_nand_partitions[] = { { .name = "booter", @@ -334,7 +386,11 @@ static int rb91x_nand_probe(struct platform_device *pdev) return ret; if (rbni->mtd.writesize == 512) +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0) rbni->chip.ecc.layout = &rb91x_nand_ecclayout; +#else + mtd_set_ooblayout(&rbni->mtd, &rb91x_nand_ecclayout_ops); +#endif ret = nand_scan_tail(&rbni->mtd); if (ret) diff --git a/target/linux/ar71xx/files/drivers/mtd/tplinkpart.c b/target/linux/ar71xx/files/drivers/mtd/tplinkpart.c index ac1efa1c22..1b94163b83 100644 --- a/target/linux/ar71xx/files/drivers/mtd/tplinkpart.c +++ b/target/linux/ar71xx/files/drivers/mtd/tplinkpart.c @@ -15,6 +15,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/version.h> #define TPLINK_NUM_PARTS 5 #define TPLINK_HEADER_V1 0x01000000 @@ -109,7 +110,11 @@ static int tplink_check_rootfs_magic(struct mtd_info *mtd, size_t offset) } static int tplink_parse_partitions_offset(struct mtd_info *master, +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) struct mtd_partition **pparts, +#else + const struct mtd_partition **pparts, +#endif struct mtd_part_parser_data *data, size_t offset) { @@ -181,7 +186,11 @@ err: } static int tplink_parse_partitions(struct mtd_info *master, +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) struct mtd_partition **pparts, +#else + const struct mtd_partition **pparts, +#endif struct mtd_part_parser_data *data) { return tplink_parse_partitions_offset(master, pparts, data, @@ -189,7 +198,11 @@ static int tplink_parse_partitions(struct mtd_info *master, } static int tplink_parse_64k_partitions(struct mtd_info *master, +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) struct mtd_partition **pparts, +#else + const struct mtd_partition **pparts, +#endif struct mtd_part_parser_data *data) { return tplink_parse_partitions_offset(master, pparts, data, diff --git a/target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c b/target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c index b9e9af35b8..5b6da713f4 100644 --- a/target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c +++ b/target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c @@ -17,6 +17,7 @@ #include <linux/netdevice.h> #include <linux/phy.h> #include <net/dsa.h> +#include <linux/version.h> #define REG_BASE 0x10 #define REG_PHY(p) (REG_BASE + (p)) @@ -26,11 +27,12 @@ static int reg_read(struct dsa_switch *ds, int addr, int reg) { -#if LINUX_VERSION_CODE < KERNEL_VERSION(3,15,0) - return mdiobus_read(ds->master_mii_bus, addr, reg); -#else +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev); return mdiobus_read(bus, addr, reg); +#else + struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->dev); + return mdiobus_read(bus, addr, reg); #endif } @@ -47,14 +49,22 @@ static int reg_read(struct dsa_switch *ds, int addr, int reg) static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val) { -#if LINUX_VERSION_CODE < KERNEL_VERSION(3,15,0) - return mdiobus_write(ds->master_mii_bus, addr, reg, val); -#else +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev); return mdiobus_write(bus, addr, reg, val); +#else + struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->dev); + return mdiobus_write(bus, addr, reg, val); #endif } +#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,8,0) +static enum dsa_tag_protocol mv88e6063_get_tag_protocol(struct dsa_switch *ds) +{ + return DSA_TAG_PROTO_TRAILER; +} +#endif + #define REG_WRITE(addr, reg, val) \ ({ \ int __ret; \ @@ -64,16 +74,20 @@ static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val) return __ret; \ }) -#if LINUX_VERSION_CODE < KERNEL_VERSION(3,15,0) -static char *mv88e6063_probe(struct mii_bus *bus, int sw_addr) -{ +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) +static char *mv88e6063_drv_probe(struct device *host_dev, int sw_addr) #else -static char *mv88e6063_probe(struct device *host_dev, int sw_addr) +static const char *mv88e6063_drv_probe(struct device *dsa_dev, + struct device *host_dev, int sw_addr, + void **_priv) +#endif { struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev); -#endif int ret; + if (!bus) + return NULL; + ret = mdiobus_read(bus, REG_PORT(0), 0x03); if (ret >= 0) { ret &= 0xfff0; @@ -163,7 +177,11 @@ static int mv88e6063_setup_port(struct dsa_switch *ds, int p) REG_WRITE(addr, 0x06, ((p & 0xf) << 12) | (dsa_is_cpu_port(ds, p) ? +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) ds->phys_port_mask : +#else + ds->enabled_port_mask : +#endif (1 << ds->dst->cpu_port))); /* @@ -240,72 +258,32 @@ mv88e6063_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val) return reg_write(ds, addr, regnum, val); } -static void mv88e6063_poll_link(struct dsa_switch *ds) -{ - int i; - - for (i = 0; i < DSA_MAX_PORTS; i++) { - struct net_device *dev; - int uninitialized_var(port_status); - int link; - int speed; - int duplex; - int fc; - - dev = ds->ports[i]; - if (dev == NULL) - continue; - - link = 0; - if (dev->flags & IFF_UP) { - port_status = reg_read(ds, REG_PORT(i), 0x00); - if (port_status < 0) - continue; - - link = !!(port_status & 0x1000); - } - - if (!link) { - if (netif_carrier_ok(dev)) { - printk(KERN_INFO "%s: link down\n", dev->name); - netif_carrier_off(dev); - } - continue; - } - - speed = (port_status & 0x0100) ? 100 : 10; - duplex = (port_status & 0x0200) ? 1 : 0; - fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0; - - if (!netif_carrier_ok(dev)) { - printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, " - "flow control %sabled\n", dev->name, - speed, duplex ? "full" : "half", - fc ? "en" : "dis"); - netif_carrier_on(dev); - } - } -} - -static struct dsa_switch_driver mv88e6063_switch_driver = { +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,9,0) +static struct dsa_switch_driver mv88e6063_switch_ops = { +#else +static struct dsa_switch_ops mv88e6063_switch_ops = { +#endif +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,8,0) .tag_protocol = htons(ETH_P_TRAILER), - .probe = mv88e6063_probe, +#else + .get_tag_protocol = mv88e6063_get_tag_protocol, +#endif + .probe = mv88e6063_drv_probe, .setup = mv88e6063_setup, .set_addr = mv88e6063_set_addr, .phy_read = mv88e6063_phy_read, .phy_write = mv88e6063_phy_write, - .poll_link = mv88e6063_poll_link, }; static int __init mv88e6063_init(void) { - register_switch_driver(&mv88e6063_switch_driver); + register_switch_driver(&mv88e6063_switch_ops); return 0; } module_init(mv88e6063_init); static void __exit mv88e6063_cleanup(void) { - unregister_switch_driver(&mv88e6063_switch_driver); + unregister_switch_driver(&mv88e6063_switch_ops); } module_exit(mv88e6063_cleanup); diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c index b63a4b7f9d..2915476569 100644 --- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c +++ b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c @@ -254,7 +254,11 @@ static int ag71xx_mdio_probe(struct platform_device *pdev) am->mii_bus->read = ag71xx_mdio_read; am->mii_bus->write = ag71xx_mdio_write; am->mii_bus->reset = ag71xx_mdio_reset; +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) am->mii_bus->irq = am->mii_irq; +#else + memcpy(am->mii_bus->irq, am->mii_irq, sizeof(am->mii_bus->irq)); +#endif am->mii_bus->priv = am; am->mii_bus->parent = &pdev->dev; snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev)); diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c index 9de77e924b..12fa2e301b 100644 --- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c +++ b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c @@ -112,6 +112,7 @@ static int ag71xx_phy_connect_multi(struct ag71xx *ag) if (!(pdata->phy_mask & (1 << phy_addr))) continue; +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) if (ag->mii_bus->phy_map[phy_addr] == NULL) continue; @@ -122,6 +123,18 @@ static int ag71xx_phy_connect_multi(struct ag71xx *ag) if (phydev == NULL) phydev = ag->mii_bus->phy_map[phy_addr]; +#else + if (ag->mii_bus->mdio_map[phy_addr] == NULL) + continue; + + DBG("%s: PHY found at %s, uid=%08x\n", + dev_name(dev), + dev_name(&ag->mii_bus->mdio_map[phy_addr]->dev), + ag->mii_bus->mdio_map[phy_addr]->phy_id); + + if (phydev == NULL) + phydev = mdiobus_get_phy(ag->mii_bus, phy_addr); +#endif } if (!phydev) { @@ -130,13 +143,21 @@ static int ag71xx_phy_connect_multi(struct ag71xx *ag) return -ENODEV; } +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) ag->phy_dev = phy_connect(ag->dev, dev_name(&phydev->dev), +#else + ag->phy_dev = phy_connect(ag->dev, phydev_name(phydev), +#endif &ag71xx_phy_link_adjust, pdata->phy_if_mode); if (IS_ERR(ag->phy_dev)) { dev_err(dev, "could not connect to PHY at %s\n", +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) dev_name(&phydev->dev)); +#else + phydev_name(phydev)); +#endif return PTR_ERR(ag->phy_dev); } @@ -149,7 +170,12 @@ static int ag71xx_phy_connect_multi(struct ag71xx *ag) phydev->advertising = phydev->supported; dev_info(dev, "connected to PHY at %s [uid=%08x, driver=%s]\n", - dev_name(&phydev->dev), phydev->phy_id, phydev->drv->name); +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) + dev_name(&phydev->dev), +#else + phydev_name(phydev), +#endif + phydev->phy_id, phydev->drv->name); ag->link = 0; ag->speed = 0; diff --git a/target/linux/ar71xx/files/drivers/spi/spi-rb4xx-cpld.c b/target/linux/ar71xx/files/drivers/spi/spi-rb4xx-cpld.c index 0534c7c374..18af83b67c 100644 --- a/target/linux/ar71xx/files/drivers/spi/spi-rb4xx-cpld.c +++ b/target/linux/ar71xx/files/drivers/spi/spi-rb4xx-cpld.c @@ -21,6 +21,7 @@ #include <linux/spi/spi.h> #include <linux/gpio.h> #include <linux/slab.h> +#include <linux/version.h> #include <asm/mach-ath79/rb4xx_cpld.h> @@ -246,7 +247,11 @@ static int rb4xx_cpld_gpio_init(struct rb4xx_cpld *cpld, unsigned int base) cpld->chip.base = base; cpld->chip.ngpio = CPLD_NUM_GPIOS; cpld->chip.can_sleep = 1; +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0) cpld->chip.dev = &cpld->spi->dev; +#else + cpld->chip.parent = &cpld->spi->dev; +#endif cpld->chip.owner = THIS_MODULE; err = gpiochip_add(&cpld->chip); diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default index 3ff5379cc4..e333166e93 100644 --- a/target/linux/ar71xx/mikrotik/config-default +++ b/target/linux/ar71xx/mikrotik/config-default @@ -215,7 +215,7 @@ CONFIG_ATH79_ROUTERBOOT=y CONFIG_CRC16=y CONFIG_CRYPTO_DEFLATE=y CONFIG_GPIO_LATCH=y -# CONFIG_LANTIQ_PHY is not set +# CONFIG_INTEL_XWAY_PHY is not set CONFIG_LEDS_RB750=y CONFIG_LZO_DECOMPRESS=y # CONFIG_MTD_CFI is not set diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default index ec9d550f22..fc243c5008 100644 --- a/target/linux/ar71xx/nand/config-default +++ b/target/linux/ar71xx/nand/config-default @@ -212,8 +212,8 @@ CONFIG_BCH=y CONFIG_CRC16=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y +# CONFIG_INTEL_XWAY_PHY is not set # CONFIG_IP17XX_PHY is not set -# CONFIG_LANTIQ_PHY is not set CONFIG_LEDS_NU801=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y diff --git a/target/linux/ar71xx/patches-4.9/001-spi-cs-gpio.patch b/target/linux/ar71xx/patches-4.9/001-spi-cs-gpio.patch new file mode 100644 index 0000000000..7a0b669e43 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/001-spi-cs-gpio.patch @@ -0,0 +1,20 @@ +--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h ++++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h +@@ -14,6 +14,7 @@ + struct ath79_spi_platform_data { + unsigned bus_num; + unsigned num_chipselect; ++ int *cs_gpios; + }; + + #endif /* _ATH79_SPI_PLATFORM_H */ +--- a/drivers/spi/spi-ath79.c ++++ b/drivers/spi/spi-ath79.c +@@ -231,6 +231,7 @@ static int ath79_spi_probe(struct platfo + if (pdata) { + master->bus_num = pdata->bus_num; + master->num_chipselect = pdata->num_chipselect; ++ master->cs_gpios = pdata->cs_gpios; + } + + sp->bitbang.master = master; diff --git a/target/linux/ar71xx/patches-4.9/002-add_back_gpio_function_select.patch b/target/linux/ar71xx/patches-4.9/002-add_back_gpio_function_select.patch new file mode 100644 index 0000000000..5b26a640eb --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/002-add_back_gpio_function_select.patch @@ -0,0 +1,92 @@ +--- /dev/null ++++ b/arch/mips/ath79/gpio.c +@@ -0,0 +1,59 @@ ++/* ++ * Atheros AR71XX/AR724X/AR913X GPIO API support ++ * ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> ++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/io.h> ++#include <linux/gpio.h> ++#include <asm/mach-ath79/ar71xx_regs.h> ++#include <asm/mach-ath79/ath79.h> ++#include "common.h" ++ ++void __iomem *ath79_gpio_base; ++EXPORT_SYMBOL_GPL(ath79_gpio_base); ++ ++static void __iomem *ath79_gpio_get_function_reg(void) ++{ ++ u32 reg = 0; ++ ++ if (soc_is_ar71xx() || ++ soc_is_ar724x() || ++ soc_is_ar913x() || ++ soc_is_ar933x()) ++ reg = AR71XX_GPIO_REG_FUNC; ++ else if (soc_is_ar934x()) ++ reg = AR934X_GPIO_REG_FUNC; ++ else ++ BUG(); ++ ++ return ath79_gpio_base + reg; ++} ++ ++void ath79_gpio_function_setup(u32 set, u32 clear) ++{ ++ void __iomem *reg = ath79_gpio_get_function_reg(); ++ ++ __raw_writel((__raw_readl(reg) & ~clear) | set, reg); ++ /* flush write */ ++ __raw_readl(reg); ++} ++ ++void ath79_gpio_function_enable(u32 mask) ++{ ++ ath79_gpio_function_setup(mask, 0); ++} ++ ++void ath79_gpio_function_disable(u32 mask) ++{ ++ ath79_gpio_function_setup(0, mask); ++} +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -118,6 +118,7 @@ static inline int soc_is_qca955x(void) + void ath79_ddr_wb_flush(unsigned int reg); + void ath79_ddr_set_pci_windows(void); + ++extern void __iomem *ath79_gpio_base; + extern void __iomem *ath79_pll_base; + extern void __iomem *ath79_reset_base; + +--- a/arch/mips/ath79/dev-common.c ++++ b/arch/mips/ath79/dev-common.c +@@ -156,4 +156,5 @@ void __init ath79_gpio_init(void) + } + + platform_device_register(&ath79_gpio_device); ++ ath79_gpio_base = ioremap(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE); + } +--- a/arch/mips/ath79/common.h ++++ b/arch/mips/ath79/common.h +@@ -24,6 +24,9 @@ unsigned long ath79_get_sys_clk_rate(con + + void ath79_ddr_ctrl_init(void); + ++void ath79_gpio_function_enable(u32 mask); ++void ath79_gpio_function_disable(u32 mask); ++void ath79_gpio_function_setup(u32 set, u32 clear); + void ath79_gpio_init(void); + + #endif /* __ATH79_COMMON_H */ diff --git a/target/linux/ar71xx/patches-4.9/004-register_gpio_driver_earlier.patch b/target/linux/ar71xx/patches-4.9/004-register_gpio_driver_earlier.patch new file mode 100644 index 0000000000..e6e972b7ef --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/004-register_gpio_driver_earlier.patch @@ -0,0 +1,15 @@ +HACK: register the GPIO driver earlier to ensure that gpio_request calls +from mach files succeed. + +--- a/drivers/gpio/gpio-ath79.c ++++ b/drivers/gpio/gpio-ath79.c +@@ -322,4 +322,8 @@ static struct platform_driver ath79_gpio + .remove = ath79_gpio_remove, + }; + +-module_platform_driver(ath79_gpio_driver); ++static int __init ath79_gpio_init(void) ++{ ++ return platform_driver_register(&ath79_gpio_driver); ++} ++postcore_initcall(ath79_gpio_init); diff --git a/target/linux/ar71xx/patches-4.9/100-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch b/target/linux/ar71xx/patches-4.9/100-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch new file mode 100644 index 0000000000..8d5b089986 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/100-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch @@ -0,0 +1,42 @@ +From 8b7a76e72fc819753878cd5684e243f33f847c79 Mon Sep 17 00:00:00 2001 +From: Markos Chandras <markos.chandras@imgtec.com> +Date: Wed, 21 Aug 2013 11:47:22 +0100 +Subject: [PATCH] MIPS: ath79: Avoid using unitialized 'reg' variable + +Fixes the following build error: +arch/mips/include/asm/mach-ath79/ath79.h:139:20: error: 'reg' may be used +uninitialized in this function [-Werror=maybe-uninitialized] +arch/mips/ath79/common.c:62:6: note: 'reg' was declared here +In file included from arch/mips/ath79/common.c:20:0: +arch/mips/ath79/common.c: In function 'ath79_device_reset_clear': +arch/mips/include/asm/mach-ath79/ath79.h:139:20: +error: 'reg' may be used uninitialized in this function +[-Werror=maybe-uninitialized] +arch/mips/ath79/common.c:90:6: note: 'reg' was declared here + +Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> +Acked-by: Gabor Juhos <juhosg@openwrt.org> +--- + arch/mips/ath79/common.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/mips/ath79/common.c ++++ b/arch/mips/ath79/common.c +@@ -106,7 +106,7 @@ void ath79_device_reset_set(u32 mask) + else if (soc_is_qca955x()) + reg = QCA955X_RESET_REG_RESET_MODULE; + else +- BUG(); ++ panic("Reset register not defined for this SOC"); + + spin_lock_irqsave(&ath79_device_reset_lock, flags); + t = ath79_reset_rr(reg); +@@ -134,7 +134,7 @@ void ath79_device_reset_clear(u32 mask) + else if (soc_is_qca955x()) + reg = QCA955X_RESET_REG_RESET_MODULE; + else +- BUG(); ++ panic("Reset register not defined for this SOC"); + + spin_lock_irqsave(&ath79_device_reset_lock, flags); + t = ath79_reset_rr(reg); diff --git a/target/linux/ar71xx/patches-4.9/103-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch b/target/linux/ar71xx/patches-4.9/103-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch new file mode 100644 index 0000000000..64fb545b24 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/103-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch @@ -0,0 +1,23 @@ +From: Felix Fietkau <nbd@nbd.name> +Date: Wed, 18 May 2016 18:03:31 +0200 +Subject: [PATCH] MIPS: ath79: fix register address in ath79_ddr_wb_flush() + +ath79_ddr_wb_flush_base has the type void __iomem *, so register offsets +need to be a multiple of 4. + +Cc: Alban Bedel <albeu@free.fr> +Fixes: 24b0e3e84fbf ("MIPS: ath79: Improve the DDR controller interface") +Signed-off-by: Felix Fietkau <nbd@nbd.name> +--- + +--- a/arch/mips/ath79/common.c ++++ b/arch/mips/ath79/common.c +@@ -58,7 +58,7 @@ EXPORT_SYMBOL_GPL(ath79_ddr_ctrl_init); + + void ath79_ddr_wb_flush(u32 reg) + { +- void __iomem *flush_reg = ath79_ddr_wb_flush_base + reg; ++ void __iomem *flush_reg = ath79_ddr_wb_flush_base + reg * 4; + + /* Flush the DDR write buffer. */ + __raw_writel(0x1, flush_reg); diff --git a/target/linux/ar71xx/patches-4.9/104-spi-spi-ath79-support-multiple-internal-chip-select-.patch b/target/linux/ar71xx/patches-4.9/104-spi-spi-ath79-support-multiple-internal-chip-select-.patch new file mode 100644 index 0000000000..3c355cd21c --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/104-spi-spi-ath79-support-multiple-internal-chip-select-.patch @@ -0,0 +1,70 @@ +From: Felix Fietkau <nbd@nbd.name> +Date: Fri, 9 Dec 2016 20:09:16 +0100 +Subject: [PATCH] spi: spi-ath79: support multiple internal chip select + lines + +Several devices with multiple flash chips use the internal chip select +lines. Don't assume that chip select 1 and above are GPIO lines. + +Signed-off-by: Felix Fietkau <nbd@nbd.name> +--- + +--- a/drivers/spi/spi-ath79.c ++++ b/drivers/spi/spi-ath79.c +@@ -78,14 +78,16 @@ static void ath79_spi_chipselect(struct + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); + } + +- if (spi->chip_select) { ++ if (gpio_is_valid(spi->cs_gpio)) { + /* SPI is normally active-low */ + gpio_set_value(spi->cs_gpio, cs_high); + } else { ++ u32 cs_bit = AR71XX_SPI_IOC_CS(spi->chip_select); ++ + if (cs_high) +- sp->ioc_base |= AR71XX_SPI_IOC_CS0; ++ sp->ioc_base |= cs_bit; + else +- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0; ++ sp->ioc_base &= ~cs_bit; + + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); + } +@@ -118,11 +120,8 @@ static int ath79_spi_setup_cs(struct spi + struct ath79_spi *sp = ath79_spidev_to_sp(spi); + int status; + +- if (spi->chip_select && !gpio_is_valid(spi->cs_gpio)) +- return -EINVAL; +- + status = 0; +- if (spi->chip_select) { ++ if (gpio_is_valid(spi->cs_gpio)) { + unsigned long flags; + + flags = GPIOF_DIR_OUT; +@@ -134,10 +133,12 @@ static int ath79_spi_setup_cs(struct spi + status = gpio_request_one(spi->cs_gpio, flags, + dev_name(&spi->dev)); + } else { ++ u32 cs_bit = AR71XX_SPI_IOC_CS(spi->chip_select); ++ + if (spi->mode & SPI_CS_HIGH) +- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0; ++ sp->ioc_base &= ~cs_bit; + else +- sp->ioc_base |= AR71XX_SPI_IOC_CS0; ++ sp->ioc_base |= cs_bit; + + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); + } +@@ -147,7 +148,7 @@ static int ath79_spi_setup_cs(struct spi + + static void ath79_spi_cleanup_cs(struct spi_device *spi) + { +- if (spi->chip_select) { ++ if (gpio_is_valid(spi->cs_gpio)) { + gpio_free(spi->cs_gpio); + } + } diff --git a/target/linux/ar71xx/patches-4.9/105-spi-spi-ath79-use-gpio_set_value_cansleep-for-GPIO-c.patch b/target/linux/ar71xx/patches-4.9/105-spi-spi-ath79-use-gpio_set_value_cansleep-for-GPIO-c.patch new file mode 100644 index 0000000000..11b6a83104 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/105-spi-spi-ath79-use-gpio_set_value_cansleep-for-GPIO-c.patch @@ -0,0 +1,19 @@ +From: Felix Fietkau <nbd@nbd.name> +Date: Fri, 9 Dec 2016 20:11:35 +0100 +Subject: [PATCH] spi: spi-ath79: use gpio_set_value_cansleep for GPIO chip + select + +Signed-off-by: Felix Fietkau <nbd@nbd.name> +--- + +--- a/drivers/spi/spi-ath79.c ++++ b/drivers/spi/spi-ath79.c +@@ -80,7 +80,7 @@ static void ath79_spi_chipselect(struct + + if (gpio_is_valid(spi->cs_gpio)) { + /* SPI is normally active-low */ +- gpio_set_value(spi->cs_gpio, cs_high); ++ gpio_set_value_cansleep(spi->cs_gpio, cs_high); + } else { + u32 cs_bit = AR71XX_SPI_IOC_CS(spi->chip_select); + diff --git a/target/linux/ar71xx/patches-4.9/106-01-MIPS-ath79-fix-AR724X_PLL_REG_PCIE_CONFIG-offset.patch b/target/linux/ar71xx/patches-4.9/106-01-MIPS-ath79-fix-AR724X_PLL_REG_PCIE_CONFIG-offset.patch new file mode 100644 index 0000000000..e785b30eff --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/106-01-MIPS-ath79-fix-AR724X_PLL_REG_PCIE_CONFIG-offset.patch @@ -0,0 +1,29 @@ +From 0f15814bcdf59f10b708a3fba636acb089e9a4f1 Mon Sep 17 00:00:00 2001 +From: Mathias Kresin <dev@kresin.me> +Date: Thu, 30 Mar 2017 15:34:39 +0200 +Subject: [PATCH] MIPS: ath79: fix AR724X_PLL_REG_PCIE_CONFIG offset + +According to the QCA u-boot source the "PCIE Phase Lock Loop +Configuration (PCIE_PLL_CONFIG)" register is for all SoCs except the +QCA955X and QCA956X at offset 0x10. + +Since the PCIE PLL config register is only defined for the AR724x fix +only this value. The value is wrong since the day it was added and isn't +yet used by any driver. + +Signed-off-by: Mathias Kresin <dev@kresin.me> +--- + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -167,7 +167,7 @@ + #define AR71XX_AHB_DIV_MASK 0x7 + + #define AR724X_PLL_REG_CPU_CONFIG 0x00 +-#define AR724X_PLL_REG_PCIE_CONFIG 0x18 ++#define AR724X_PLL_REG_PCIE_CONFIG 0x10 + + #define AR724X_PLL_FB_SHIFT 0 + #define AR724X_PLL_FB_MASK 0x3ff diff --git a/target/linux/ar71xx/patches-4.9/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch b/target/linux/ar71xx/patches-4.9/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch new file mode 100644 index 0000000000..3af99bf3b5 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch @@ -0,0 +1,113 @@ +From 460f382c278fe66059a773c41cbcd0db86d53983 Mon Sep 17 00:00:00 2001 +From: Mathias Kresin <dev@kresin.me> +Date: Thu, 13 Apr 2017 09:47:42 +0200 +Subject: [PATCH] MIPS: pci-ar724x: get PCIe controller out of reset + +The ar724x pci driver expects the PCIe controller to be brought out of +reset by the bootloader. + +At least the AVM Fritz 300E bootloader doesn't take care of releasing +the different PCIe controller related resets which causes an endless +hang as soon as either the PCIE Reset register (0x180f0018) or the PCI +Application Control register (0x180f0000) is read from. + +Do the full "PCIE Root Complex Initialization Sequence" if the PCIe +host controller is still in reset during probing. + +The QCA u-boot sleeps 10ms after the PCIE Application Control bit is +set to ready. It has been shown that 10ms might not be enough time if +PCIe should be used right after setting the bit. During my tests it +took up to 20ms till the link was up. Giving the link up to 100ms +should work for all cases. + +Signed-off-by: Mathias Kresin <dev@kresin.me> +--- + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 3 ++ + arch/mips/pci/pci-ar724x.c | 42 ++++++++++++++++++++++++++ + 2 files changed, 45 insertions(+) + +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -169,6 +169,9 @@ + #define AR724X_PLL_REG_CPU_CONFIG 0x00 + #define AR724X_PLL_REG_PCIE_CONFIG 0x10 + ++#define AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS BIT(16) ++#define AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET BIT(25) ++ + #define AR724X_PLL_FB_SHIFT 0 + #define AR724X_PLL_FB_MASK 0x3ff + #define AR724X_PLL_REF_DIV_SHIFT 10 +--- a/arch/mips/pci/pci-ar724x.c ++++ b/arch/mips/pci/pci-ar724x.c +@@ -12,14 +12,18 @@ + #include <linux/irq.h> + #include <linux/pci.h> + #include <linux/init.h> ++#include <linux/delay.h> + #include <linux/platform_device.h> + #include <asm/mach-ath79/ath79.h> + #include <asm/mach-ath79/ar71xx_regs.h> + ++#define AR724X_PCI_REG_APP 0x0 + #define AR724X_PCI_REG_RESET 0x18 + #define AR724X_PCI_REG_INT_STATUS 0x4c + #define AR724X_PCI_REG_INT_MASK 0x50 + ++#define AR724X_PCI_APP_LTSSM_ENABLE BIT(0) ++ + #define AR724X_PCI_RESET_LINK_UP BIT(0) + + #define AR724X_PCI_INT_DEV0 BIT(14) +@@ -325,6 +329,37 @@ static void ar724x_pci_irq_init(struct a + apc); + } + ++static void ar724x_pci_hw_init(struct ar724x_pci_controller *apc) ++{ ++ u32 ppl, app; ++ int wait = 0; ++ ++ /* deassert PCIe host controller and PCIe PHY reset */ ++ ath79_device_reset_clear(AR724X_RESET_PCIE); ++ ath79_device_reset_clear(AR724X_RESET_PCIE_PHY); ++ ++ /* remove the reset of the PCIE PLL */ ++ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG); ++ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET; ++ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl); ++ ++ /* deassert bypass for the PCIE PLL */ ++ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG); ++ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS; ++ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl); ++ ++ /* set PCIE Application Control to ready */ ++ app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP); ++ app |= AR724X_PCI_APP_LTSSM_ENABLE; ++ __raw_writel(app, apc->ctrl_base + AR724X_PCI_REG_APP); ++ ++ /* wait up to 100ms for PHY link up */ ++ do { ++ mdelay(10); ++ wait++; ++ } while (wait < 10 && !ar724x_pci_check_link(apc)); ++} ++ + static int ar724x_pci_probe(struct platform_device *pdev) + { + struct ar724x_pci_controller *apc; +@@ -383,6 +418,13 @@ static int ar724x_pci_probe(struct platf + apc->pci_controller.io_resource = &apc->io_res; + apc->pci_controller.mem_resource = &apc->mem_res; + ++ /* ++ * Do the full PCIE Root Complex Initialization Sequence if the PCIe ++ * host controller is in reset. ++ */ ++ if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE) ++ ar724x_pci_hw_init(apc); ++ + apc->link_up = ar724x_pci_check_link(apc); + if (!apc->link_up) + dev_warn(&pdev->dev, "PCIe link is down\n"); diff --git a/target/linux/ar71xx/patches-4.9/200-MIPS-ath79-fix-ar933x-wmac-reset.patch b/target/linux/ar71xx/patches-4.9/200-MIPS-ath79-fix-ar933x-wmac-reset.patch new file mode 100644 index 0000000000..b7ae0ce649 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/200-MIPS-ath79-fix-ar933x-wmac-reset.patch @@ -0,0 +1,30 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -62,10 +62,26 @@ static void __init ar913x_wmac_setup(voi + + static int ar933x_wmac_reset(void) + { ++ int retries = 20; ++ + ath79_device_reset_set(AR933X_RESET_WMAC); + ath79_device_reset_clear(AR933X_RESET_WMAC); + +- return 0; ++ while (1) { ++ u32 bootstrap; ++ ++ bootstrap = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); ++ if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0) ++ return 0; ++ ++ if (retries-- == 0) ++ break; ++ ++ udelay(10000); ++ } ++ ++ pr_err("ar933x: WMAC reset timed out"); ++ return -ETIMEDOUT; + } + + static int ar933x_r1_get_wmac_revision(void) diff --git a/target/linux/ar71xx/patches-4.9/201-ar913x_wmac_external_reset.patch b/target/linux/ar71xx/patches-4.9/201-ar913x_wmac_external_reset.patch new file mode 100644 index 0000000000..9b704a3c47 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/201-ar913x_wmac_external_reset.patch @@ -0,0 +1,31 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -44,7 +44,7 @@ static struct platform_device ath79_wmac + }, + }; + +-static void __init ar913x_wmac_setup(void) ++static int ar913x_wmac_reset(void) + { + /* reset the WMAC */ + ath79_device_reset_set(AR913X_RESET_AMBA2WMAC); +@@ -53,10 +53,19 @@ static void __init ar913x_wmac_setup(voi + ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC); + mdelay(10); + ++ return 0; ++} ++ ++static void __init ar913x_wmac_setup(void) ++{ ++ ar913x_wmac_reset(); ++ + ath79_wmac_resources[0].start = AR913X_WMAC_BASE; + ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1; + ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2); + ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2); ++ ++ ath79_wmac_data.external_reset = ar913x_wmac_reset; + } + + diff --git a/target/linux/ar71xx/patches-4.9/202-MIPS-ath79-ar934x-wmac-revision.patch b/target/linux/ar71xx/patches-4.9/202-MIPS-ath79-ar934x-wmac-revision.patch new file mode 100644 index 0000000000..0f8016f847 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/202-MIPS-ath79-ar934x-wmac-revision.patch @@ -0,0 +1,11 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -139,6 +139,8 @@ static void ar934x_wmac_setup(void) + ath79_wmac_data.is_clk_25mhz = false; + else + ath79_wmac_data.is_clk_25mhz = true; ++ ++ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision; + } + + static void qca955x_wmac_setup(void) diff --git a/target/linux/ar71xx/patches-4.9/203-MIPS-ath79-fix-restart.patch b/target/linux/ar71xx/patches-4.9/203-MIPS-ath79-fix-restart.patch new file mode 100644 index 0000000000..48f4d95e74 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/203-MIPS-ath79-fix-restart.patch @@ -0,0 +1,20 @@ +--- a/arch/mips/ath79/setup.c ++++ b/arch/mips/ath79/setup.c +@@ -40,6 +40,7 @@ static char ath79_sys_type[ATH79_SYS_TYP + + static void ath79_restart(char *command) + { ++ local_irq_disable(); + ath79_device_reset_set(AR71XX_RESET_FULL_CHIP); + for (;;) + if (cpu_wait) +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -135,6 +135,7 @@ static inline u32 ath79_pll_rr(unsigned + static inline void ath79_reset_wr(unsigned reg, u32 val) + { + __raw_writel(val, ath79_reset_base + reg); ++ (void) __raw_readl(ath79_reset_base + reg); /* flush */ + } + + static inline u32 ath79_reset_rr(unsigned reg) diff --git a/target/linux/ar71xx/patches-4.9/220-add_cpu_feature_overrides.patch b/target/linux/ar71xx/patches-4.9/220-add_cpu_feature_overrides.patch new file mode 100644 index 0000000000..d925f92624 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/220-add_cpu_feature_overrides.patch @@ -0,0 +1,28 @@ +--- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h ++++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h +@@ -36,6 +36,7 @@ + #define cpu_has_mdmx 0 + #define cpu_has_mips3d 0 + #define cpu_has_smartmips 0 ++#define cpu_has_rixi 0 + + #define cpu_has_mips32r1 1 + #define cpu_has_mips32r2 1 +@@ -43,6 +44,7 @@ + #define cpu_has_mips64r2 0 + + #define cpu_has_mipsmt 0 ++#define cpu_has_userlocal 0 + + #define cpu_has_64bits 0 + #define cpu_has_64bit_zero_reg 0 +@@ -51,5 +53,9 @@ + + #define cpu_dcache_line_size() 32 + #define cpu_icache_line_size() 32 ++#define cpu_has_vtag_icache 0 ++#define cpu_has_dc_aliases 1 ++#define cpu_has_ic_fills_f_dc 0 ++#define cpu_has_pindexed_dcache 0 + + #endif /* __ASM_MACH_ATH79_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/ar71xx/patches-4.9/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch b/target/linux/ar71xx/patches-4.9/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch new file mode 100644 index 0000000000..0bc64b7a17 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch @@ -0,0 +1,21 @@ +--- a/arch/mips/include/asm/mips_machine.h ++++ b/arch/mips/include/asm/mips_machine.h +@@ -36,6 +36,18 @@ static struct mips_machine machine_##_ty + .mach_setup = _setup, \ + }; + ++#define MIPS_MACHINE_NONAME(_type, _id, _setup) \ ++static const char machine_id_##_type[] __initconst \ ++ __aligned(1) = _id; \ ++static struct mips_machine machine_##_type \ ++ __used __section(.mips.machines.init) = \ ++{ \ ++ .mach_type = _type, \ ++ .mach_id = machine_id_##_type, \ ++ .mach_name = NULL, \ ++ .mach_setup = _setup, \ ++}; ++ + extern long __mips_machines_start; + extern long __mips_machines_end; + diff --git a/target/linux/ar71xx/patches-4.9/310-lib-add-rle-decompression.patch b/target/linux/ar71xx/patches-4.9/310-lib-add-rle-decompression.patch new file mode 100644 index 0000000000..d8480125a9 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/310-lib-add-rle-decompression.patch @@ -0,0 +1,124 @@ +--- a/lib/Kconfig ++++ b/lib/Kconfig +@@ -247,6 +247,9 @@ config LZMA_COMPRESS + config LZMA_DECOMPRESS + tristate + ++config RLE_DECOMPRESS ++ tristate ++ + # + # These all provide a common interface (hence the apparent duplication with + # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.) +--- a/lib/Makefile ++++ b/lib/Makefile +@@ -120,6 +120,7 @@ obj-$(CONFIG_XZ_DEC) += xz/ + obj-$(CONFIG_RAID6_PQ) += raid6/ + obj-$(CONFIG_LZMA_COMPRESS) += lzma/ + obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/ ++obj-$(CONFIG_RLE_DECOMPRESS) += rle.o + + lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o + lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o +--- /dev/null ++++ b/include/linux/rle.h +@@ -0,0 +1,18 @@ ++#ifndef _RLE_H_ ++#define _RLE_H_ ++ ++#ifdef CONFIG_RLE_DECOMPRESS ++int rle_decode(const unsigned char *src, size_t srclen, ++ unsigned char *dst, size_t dstlen, ++ size_t *src_done, size_t *dst_done); ++#else ++static inline int ++rle_decode(const unsigned char *src, size_t srclen, ++ unsigned char *dst, size_t dstlen, ++ size_t *src_done, size_t *dst_done) ++{ ++ return -ENOTSUPP; ++} ++#endif /* CONFIG_RLE_DECOMPRESS */ ++ ++#endif /* _RLE_H_ */ +--- /dev/null ++++ b/lib/rle.c +@@ -0,0 +1,78 @@ ++/* ++ * RLE decoding routine ++ * ++ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/rle.h> ++ ++int rle_decode(const unsigned char *src, size_t srclen, ++ unsigned char *dst, size_t dstlen, ++ size_t *src_done, size_t *dst_done) ++{ ++ size_t srcpos, dstpos; ++ int ret; ++ ++ srcpos = 0; ++ dstpos = 0; ++ ret = -EINVAL; ++ ++ /* sanity checks */ ++ if (!src || !srclen || !dst || !dstlen) ++ goto out; ++ ++ while (1) { ++ char count; ++ ++ if (srcpos >= srclen) ++ break; ++ ++ count = (char) src[srcpos++]; ++ if (count == 0) { ++ ret = 0; ++ break; ++ } ++ ++ if (count > 0) { ++ unsigned char c; ++ ++ if (srcpos >= srclen) ++ break; ++ ++ c = src[srcpos++]; ++ ++ while (count--) { ++ if (dstpos >= dstlen) ++ break; ++ ++ dst[dstpos++] = c; ++ } ++ } else { ++ count *= -1; ++ ++ while (count--) { ++ if (srcpos >= srclen) ++ break; ++ if (dstpos >= dstlen) ++ break; ++ dst[dstpos++] = src[srcpos++]; ++ } ++ } ++ } ++ ++out: ++ if (src_done) ++ *src_done = srcpos; ++ if (dst_done) ++ *dst_done = dstpos; ++ ++ return ret; ++} ++ ++EXPORT_SYMBOL_GPL(rle_decode); diff --git a/target/linux/ar71xx/patches-4.9/401-mtd-physmap-add-lock-unlock.patch b/target/linux/ar71xx/patches-4.9/401-mtd-physmap-add-lock-unlock.patch new file mode 100644 index 0000000000..db7b3ca83d --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/401-mtd-physmap-add-lock-unlock.patch @@ -0,0 +1,94 @@ +--- a/drivers/mtd/maps/physmap.c ++++ b/drivers/mtd/maps/physmap.c +@@ -31,6 +31,66 @@ struct physmap_flash_info { + int vpp_refcnt; + }; + ++static struct platform_device *physmap_map2pdev(struct map_info *map) ++{ ++ return (struct platform_device *) map->map_priv_1; ++} ++ ++static void physmap_lock(struct map_info *map) ++{ ++ struct platform_device *pdev; ++ struct physmap_flash_data *physmap_data; ++ ++ pdev = physmap_map2pdev(map); ++ physmap_data = pdev->dev.platform_data; ++ physmap_data->lock(pdev); ++} ++ ++static void physmap_unlock(struct map_info *map) ++{ ++ struct platform_device *pdev; ++ struct physmap_flash_data *physmap_data; ++ ++ pdev = physmap_map2pdev(map); ++ physmap_data = pdev->dev.platform_data; ++ physmap_data->unlock(pdev); ++} ++ ++static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs) ++{ ++ map_word ret; ++ ++ physmap_lock(map); ++ ret = inline_map_read(map, ofs); ++ physmap_unlock(map); ++ ++ return ret; ++} ++ ++static void physmap_flash_write_lock(struct map_info *map, map_word d, ++ unsigned long ofs) ++{ ++ physmap_lock(map); ++ inline_map_write(map, d, ofs); ++ physmap_unlock(map); ++} ++ ++static void physmap_flash_copy_from_lock(struct map_info *map, void *to, ++ unsigned long from, ssize_t len) ++{ ++ physmap_lock(map); ++ inline_map_copy_from(map, to, from, len); ++ physmap_unlock(map); ++} ++ ++static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to, ++ const void *from, ssize_t len) ++{ ++ physmap_lock(map); ++ inline_map_copy_to(map, to, from, len); ++ physmap_unlock(map); ++} ++ + static int physmap_flash_remove(struct platform_device *dev) + { + struct physmap_flash_info *info; +@@ -153,6 +213,13 @@ static int physmap_flash_probe(struct pl + + simple_map_init(&info->map[i]); + ++ if (physmap_data->lock && physmap_data->unlock) { ++ info->map[i].read = physmap_flash_read_lock; ++ info->map[i].write = physmap_flash_write_lock; ++ info->map[i].copy_from = physmap_flash_copy_from_lock; ++ info->map[i].copy_to = physmap_flash_copy_to_lock; ++ } ++ + probe_type = rom_probe_types; + if (physmap_data->probe_type == NULL) { + for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++) +--- a/include/linux/mtd/physmap.h ++++ b/include/linux/mtd/physmap.h +@@ -25,6 +25,8 @@ struct physmap_flash_data { + unsigned int width; + int (*init)(struct platform_device *); + void (*exit)(struct platform_device *); ++ void (*lock)(struct platform_device *); ++ void (*unlock)(struct platform_device *); + void (*set_vpp)(struct platform_device *, int); + unsigned int nr_parts; + unsigned int pfow_base; diff --git a/target/linux/ar71xx/patches-4.9/402-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-4.9/402-mtd-SST39VF6401B-support.patch new file mode 100644 index 0000000000..0d483ab1a4 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/402-mtd-SST39VF6401B-support.patch @@ -0,0 +1,29 @@ +--- a/drivers/mtd/chips/jedec_probe.c ++++ b/drivers/mtd/chips/jedec_probe.c +@@ -148,6 +148,7 @@ + #define SST39LF160 0x2782 + #define SST39VF1601 0x234b + #define SST39VF3201 0x235b ++#define SST39VF6401B 0x236d + #define SST39WF1601 0x274b + #define SST39WF1602 0x274a + #define SST39LF512 0x00D4 +@@ -1569,6 +1570,18 @@ static const struct amd_flash_info jedec + ERASEINFO(0x10000,64), + } + }, { ++ .mfr_id = CFI_MFR_SST, ++ .dev_id = SST39VF6401B, ++ .name = "SST 39VF6401B", ++ .devtypes = CFI_DEVICETYPE_X16, ++ .uaddr = MTD_UADDR_0xAAAA_0x5555, ++ .dev_size = SIZE_8MiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, ++ .regions = { ++ ERASEINFO(0x10000,128) ++ } ++ }, { + .mfr_id = CFI_MFR_ST, + .dev_id = M29F800AB, + .name = "ST M29F800AB", diff --git a/target/linux/ar71xx/patches-4.9/403-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-4.9/403-mtd_fix_cfi_cmdset_0002_status_check.patch new file mode 100644 index 0000000000..415d835ee3 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/403-mtd_fix_cfi_cmdset_0002_status_check.patch @@ -0,0 +1,69 @@ +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -1630,8 +1630,8 @@ static int __xipram do_write_oneword(str + break; + } + +- if (chip_ready(map, adr)) +- break; ++ if (chip_good(map, adr, datum)) ++ goto enable_xip; + + /* Latency issues. Drop the lock, wait a while and retry */ + UDELAY(map, chip, adr, 1); +@@ -1647,6 +1647,8 @@ static int __xipram do_write_oneword(str + + ret = -EIO; + } ++ ++ enable_xip: + xip_enable(map, chip, adr); + op_done: + if (mode == FL_OTP_WRITE) +@@ -2225,7 +2227,6 @@ static int cfi_amdstd_panic_write(struct + return 0; + } + +- + /* + * Handle devices with one erase region, that only implement + * the chip erase command. +@@ -2289,8 +2290,8 @@ static int __xipram do_erase_chip(struct + chip->erase_suspended = 0; + } + +- if (chip_ready(map, adr)) +- break; ++ if (chip_good(map, adr, map_word_ff(map))) ++ goto op_done; + + if (time_after(jiffies, timeo)) { + printk(KERN_WARNING "MTD %s(): software timeout\n", +@@ -2310,6 +2311,7 @@ static int __xipram do_erase_chip(struct + ret = -EIO; + } + ++ op_done: + chip->state = FL_READY; + xip_enable(map, chip, adr); + DISABLE_VPP(map); +@@ -2378,9 +2380,9 @@ static int __xipram do_erase_oneblock(st + chip->erase_suspended = 0; + } + +- if (chip_ready(map, adr)) { ++ if (chip_good(map, adr, map_word_ff(map))) { + xip_enable(map, chip, adr); +- break; ++ goto op_done; + } + + if (time_after(jiffies, timeo)) { +@@ -2402,6 +2404,7 @@ static int __xipram do_erase_oneblock(st + ret = -EIO; + } + ++ op_done: + chip->state = FL_READY; + DISABLE_VPP(map); + put_chip(map, chip, adr); diff --git a/target/linux/ar71xx/patches-4.9/404-mtd-cybertan-trx-parser.patch b/target/linux/ar71xx/patches-4.9/404-mtd-cybertan-trx-parser.patch new file mode 100644 index 0000000000..6c2322e07f --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/404-mtd-cybertan-trx-parser.patch @@ -0,0 +1,25 @@ +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -178,6 +178,12 @@ menu "Partition parsers" + source "drivers/mtd/parsers/Kconfig" + endmenu + ++config MTD_CYBERTAN_PARTS ++ tristate "Cybertan partitioning support" ++ depends on ATH79 ++ ---help--- ++ Cybertan partitioning support ++ + config MTD_MYLOADER_PARTS + tristate "MyLoader partition parsing" + depends on ADM5120 || ATH25 || ATH79 +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63 + obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o + obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o + obj-y += parsers/ ++obj-$(CONFIG_MTD_CYBERTAN_PARTS) += cybertan_part.o + + # 'Users' - code which presents functionality to userspace. + obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o diff --git a/target/linux/ar71xx/patches-4.9/405-mtd-tp-link-partition-parser.patch b/target/linux/ar71xx/patches-4.9/405-mtd-tp-link-partition-parser.patch new file mode 100644 index 0000000000..a53d9501ec --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/405-mtd-tp-link-partition-parser.patch @@ -0,0 +1,25 @@ +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -200,6 +200,12 @@ config MTD_MYLOADER_PARTS + You will still need the parsing functions to be called by the driver + for your particular device. It won't happen automatically. + ++config MTD_TPLINK_PARTS ++ tristate "TP-Link AR7XXX/AR9XXX partitioning support" ++ depends on ATH79 ++ ---help--- ++ TBD. ++ + comment "User Modules And Translation Layers" + + # +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63 + obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o + obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o + obj-y += parsers/ ++obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o + obj-$(CONFIG_MTD_CYBERTAN_PARTS) += cybertan_part.o + + # 'Users' - code which presents functionality to userspace. diff --git a/target/linux/ar71xx/patches-4.9/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch b/target/linux/ar71xx/patches-4.9/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch new file mode 100644 index 0000000000..4fa957e70b --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch @@ -0,0 +1,34 @@ +--- a/drivers/mtd/devices/m25p80.c ++++ b/drivers/mtd/devices/m25p80.c +@@ -192,6 +192,7 @@ static ssize_t m25p80_read(struct spi_no + */ + static int m25p_probe(struct spi_device *spi) + { ++ struct mtd_part_parser_data ppdata = {0,}; + struct flash_platform_data *data; + struct m25p *flash; + struct spi_nor *nor; +@@ -244,8 +245,11 @@ static int m25p_probe(struct spi_device + if (ret) + return ret; + +- return mtd_device_register(&nor->mtd, data ? data->parts : NULL, +- data ? data->nr_parts : 0); ++ return mtd_device_parse_register(&nor->mtd, ++ data ? data->part_probes : NULL, ++ &ppdata, ++ data ? data->parts : NULL, ++ data ? data->nr_parts : 0); + } + + +--- a/include/linux/spi/flash.h ++++ b/include/linux/spi/flash.h +@@ -24,6 +24,7 @@ struct flash_platform_data { + unsigned int nr_parts; + + char *type; ++ const char **part_probes; + + /* we'll likely add more ... use JEDEC IDs, etc */ + }; diff --git a/target/linux/ar71xx/patches-4.9/408-mtd-redboot_partition_scan.patch b/target/linux/ar71xx/patches-4.9/408-mtd-redboot_partition_scan.patch new file mode 100644 index 0000000000..cd41e7ceb2 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/408-mtd-redboot_partition_scan.patch @@ -0,0 +1,44 @@ +--- a/drivers/mtd/redboot.c ++++ b/drivers/mtd/redboot.c +@@ -76,12 +76,18 @@ static int parse_redboot_partitions(stru + static char nullstring[] = "unallocated"; + #endif + ++ buf = vmalloc(master->erasesize); ++ if (!buf) ++ return -ENOMEM; ++ ++ restart: + if ( directory < 0 ) { + offset = master->size + directory * master->erasesize; + while (mtd_block_isbad(master, offset)) { + if (!offset) { + nogood: + printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); ++ vfree(buf); + return -EIO; + } + offset -= master->erasesize; +@@ -94,10 +100,6 @@ static int parse_redboot_partitions(stru + goto nogood; + } + } +- buf = vmalloc(master->erasesize); +- +- if (!buf) +- return -ENOMEM; + + printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", + master->name, offset); +@@ -170,6 +172,11 @@ static int parse_redboot_partitions(stru + } + if (i == numslots) { + /* Didn't find it */ ++ if (offset + master->erasesize < master->size) { ++ /* not at the end of the flash yet, maybe next block :) */ ++ directory++; ++ goto restart; ++ } + printk(KERN_NOTICE "No RedBoot partition table detected in %s\n", + master->name); + ret = 0; diff --git a/target/linux/ar71xx/patches-4.9/409-mtd-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-4.9/409-mtd-rb4xx_nand_driver.patch new file mode 100644 index 0000000000..93d34b8826 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/409-mtd-rb4xx_nand_driver.patch @@ -0,0 +1,21 @@ +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -569,4 +569,8 @@ config MTD_NAND_MTK + Enables support for NAND controller on MTK SoCs. + This controller is found on mt27xx, mt81xx, mt65xx SoCs. + ++config MTD_NAND_RB4XX ++ tristate "NAND flash driver for RouterBoard 4xx series" ++ depends on MTD_NAND && ATH79_MACH_RB4XX ++ + endif # MTD_NAND +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -33,6 +33,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27 + obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o + obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o + obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o ++obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o + obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o + obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o + obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o diff --git a/target/linux/ar71xx/patches-4.9/410-mtd-rb750-nand-driver.patch b/target/linux/ar71xx/patches-4.9/410-mtd-rb750-nand-driver.patch new file mode 100644 index 0000000000..9ea879c8e4 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/410-mtd-rb750-nand-driver.patch @@ -0,0 +1,21 @@ +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -573,4 +573,8 @@ config MTD_NAND_RB4XX + tristate "NAND flash driver for RouterBoard 4xx series" + depends on MTD_NAND && ATH79_MACH_RB4XX + ++config MTD_NAND_RB750 ++ tristate "NAND flash driver for the RouterBoard 750" ++ depends on MTD_NAND && ATH79_MACH_RB750 ++ + endif # MTD_NAND +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx + obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o + obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o + obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o ++obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o + obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o + obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o + obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o diff --git a/target/linux/ar71xx/patches-4.9/411-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-4.9/411-mtd-cfi_cmdset_0002-force-word-write.patch new file mode 100644 index 0000000000..7f5b2f55ac --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/411-mtd-cfi_cmdset_0002-force-word-write.patch @@ -0,0 +1,61 @@ +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -40,7 +40,7 @@ + #include <linux/mtd/xip.h> + + #define AMD_BOOTLOC_BUG +-#define FORCE_WORD_WRITE 0 ++#define FORCE_WORD_WRITE 1 + + #define MAX_WORD_RETRIES 3 + +@@ -51,7 +51,9 @@ + + static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); + static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); ++#if !FORCE_WORD_WRITE + static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); ++#endif + static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); + static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); + static void cfi_amdstd_sync (struct mtd_info *); +@@ -202,6 +204,7 @@ static void fixup_amd_bootblock(struct m + } + #endif + ++#if !FORCE_WORD_WRITE + static void fixup_use_write_buffers(struct mtd_info *mtd) + { + struct map_info *map = mtd->priv; +@@ -211,6 +214,7 @@ static void fixup_use_write_buffers(stru + mtd->_write = cfi_amdstd_write_buffers; + } + } ++#endif /* !FORCE_WORD_WRITE */ + + /* Atmel chips don't use the same PRI format as AMD chips */ + static void fixup_convert_atmel_pri(struct mtd_info *mtd) +@@ -1789,6 +1793,7 @@ static int cfi_amdstd_write_words(struct + /* + * FIXME: interleaved mode not tested, and probably not supported! + */ ++#if !FORCE_WORD_WRITE + static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, + unsigned long adr, const u_char *buf, + int len) +@@ -1917,7 +1922,6 @@ static int __xipram do_write_buffer(stru + return ret; + } + +- + static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) + { +@@ -1992,6 +1996,7 @@ static int cfi_amdstd_write_buffers(stru + + return 0; + } ++#endif /* !FORCE_WORD_WRITE */ + + /* + * Wait for the flash chip to become ready to write data diff --git a/target/linux/ar71xx/patches-4.9/413-mtd-ar934x-nand-driver.patch b/target/linux/ar71xx/patches-4.9/413-mtd-ar934x-nand-driver.patch new file mode 100644 index 0000000000..9f9c339e6b --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/413-mtd-ar934x-nand-driver.patch @@ -0,0 +1,25 @@ +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -577,4 +577,12 @@ config MTD_NAND_RB750 + tristate "NAND flash driver for the RouterBoard 750" + depends on MTD_NAND && ATH79_MACH_RB750 + ++config MTD_NAND_AR934X ++ tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs" ++ depends on (SOC_AR934X || SOC_QCA955X) ++ ++config MTD_NAND_AR934X_HW_ECC ++ bool "Hardware ECC support for the AR934X NAND Controller (EXPERIMENTAL)" ++ depends on MTD_NAND_AR934X ++ + endif # MTD_NAND +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams- + obj-$(CONFIG_MTD_NAND_DENALI) += denali.o + obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o + obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o ++obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nfc.o + obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o + obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o + obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o diff --git a/target/linux/ar71xx/patches-4.9/414-mtd-rb91x-nand-driver.patch b/target/linux/ar71xx/patches-4.9/414-mtd-rb91x-nand-driver.patch new file mode 100644 index 0000000000..d1b61f096d --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/414-mtd-rb91x-nand-driver.patch @@ -0,0 +1,23 @@ +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -577,6 +577,10 @@ config MTD_NAND_RB750 + tristate "NAND flash driver for the RouterBoard 750" + depends on MTD_NAND && ATH79_MACH_RB750 + ++config MTD_NAND_RB91X ++ tristate "NAND flash driver for the RouterBOARD 91x series" ++ depends on MTD_NAND && ATH79_MACH_RB91X ++ + config MTD_NAND_AR934X + tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs" + depends on (SOC_AR934X || SOC_QCA955X) +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -36,6 +36,7 @@ obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nan + obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o + obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o + obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o ++obj-$(CONFIG_MTD_NAND_RB91X) += rb91x_nand.o + obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o + obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o + obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o diff --git a/target/linux/ar71xx/patches-4.9/420-net-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-4.9/420-net-ar71xx_mac_driver.patch new file mode 100644 index 0000000000..feb2e6a393 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/420-net-ar71xx_mac_driver.patch @@ -0,0 +1,28 @@ +--- a/drivers/net/ethernet/atheros/Kconfig ++++ b/drivers/net/ethernet/atheros/Kconfig +@@ -5,7 +5,7 @@ + config NET_VENDOR_ATHEROS + bool "Atheros devices" + default y +- depends on PCI ++ depends on (PCI || ATH79) + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y. + +@@ -78,4 +78,6 @@ config ALX + To compile this driver as a module, choose M here. The module + will be called alx. + ++source drivers/net/ethernet/atheros/ag71xx/Kconfig ++ + endif # NET_VENDOR_ATHEROS +--- a/drivers/net/ethernet/atheros/Makefile ++++ b/drivers/net/ethernet/atheros/Makefile +@@ -2,6 +2,7 @@ + # Makefile for the Atheros network device drivers. + # + ++obj-$(CONFIG_AG71XX) += ag71xx/ + obj-$(CONFIG_ATL1) += atlx/ + obj-$(CONFIG_ATL2) += atlx/ + obj-$(CONFIG_ATL1E) += atl1e/ diff --git a/target/linux/ar71xx/patches-4.9/423-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-4.9/423-dsa-add-88e6063-driver.patch new file mode 100644 index 0000000000..1df93e9965 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/423-dsa-add-88e6063-driver.patch @@ -0,0 +1,24 @@ +--- a/drivers/net/dsa/Kconfig ++++ b/drivers/net/dsa/Kconfig +@@ -9,6 +9,13 @@ config NET_DSA_MV88E6060 + This enables support for the Marvell 88E6060 ethernet switch + chip. + ++config NET_DSA_MV88E6063 ++ bool "Marvell 88E6063 ethernet switch chip support" ++ select NET_DSA_TAG_TRAILER ++ ---help--- ++ This enables support for the Marvell 88E6063 ethernet switch ++ chip ++ + config NET_DSA_BCM_SF2 + tristate "Broadcom Starfighter 2 Ethernet switch support" + depends on HAS_IOMEM && NET_DSA +--- a/drivers/net/dsa/Makefile ++++ b/drivers/net/dsa/Makefile +@@ -1,4 +1,5 @@ + obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o ++obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o + obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm_sf2.o + obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o + diff --git a/target/linux/ar71xx/patches-4.9/430-drivers-link-spi-before-mtd.patch b/target/linux/ar71xx/patches-4.9/430-drivers-link-spi-before-mtd.patch new file mode 100644 index 0000000000..a862454597 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/430-drivers-link-spi-before-mtd.patch @@ -0,0 +1,12 @@ +--- a/drivers/Makefile ++++ b/drivers/Makefile +@@ -77,8 +77,8 @@ obj-$(CONFIG_SCSI) += scsi/ + obj-y += nvme/ + obj-$(CONFIG_ATA) += ata/ + obj-$(CONFIG_TARGET_CORE) += target/ +-obj-$(CONFIG_MTD) += mtd/ + obj-$(CONFIG_SPI) += spi/ ++obj-$(CONFIG_MTD) += mtd/ + obj-$(CONFIG_SPMI) += spmi/ + obj-$(CONFIG_HSI) += hsi/ + obj-y += net/ diff --git a/target/linux/ar71xx/patches-4.9/432-spi-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-4.9/432-spi-rb4xx-spi-driver.patch new file mode 100644 index 0000000000..e896d0bdf4 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/432-spi-rb4xx-spi-driver.patch @@ -0,0 +1,25 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -533,6 +533,12 @@ config SPI_QUP + This driver can also be built as a module. If so, the module + will be called spi_qup. + ++config SPI_RB4XX ++ tristate "Mikrotik RB4XX SPI master" ++ depends on SPI_MASTER && ATH79_MACH_RB4XX ++ help ++ SPI controller driver for the Mikrotik RB4xx series boards. ++ + config SPI_S3C24XX + tristate "Samsung S3C24XX series SPI" + depends on ARCH_S3C24XX +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -72,6 +72,7 @@ obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx. + spi-pxa2xx-platform-objs := spi-pxa2xx.o spi-pxa2xx-dma.o + obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o + obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o ++obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o + obj-$(CONFIG_SPI_QUP) += spi-qup.o + obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o + obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o diff --git a/target/linux/ar71xx/patches-4.9/433-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-4.9/433-spi-rb4xx-cpld-driver.patch new file mode 100644 index 0000000000..c44acab32e --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/433-spi-rb4xx-cpld-driver.patch @@ -0,0 +1,26 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -761,6 +761,13 @@ config SPI_TLE62X0 + sysfs interface, with each line presented as a kind of GPIO + exposing both switch control and diagnostic feedback. + ++config SPI_RB4XX_CPLD ++ tristate "MikroTik RB4XX CPLD driver" ++ depends on ATH79_MACH_RB4XX ++ help ++ SPI driver for the Xilinx CPLD chip present on the ++ MikroTik RB4xx boards. ++ + # + # Add new SPI protocol masters in alphabetical order above this line + # +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -73,6 +73,7 @@ spi-pxa2xx-platform-objs := spi-pxa2xx. + obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o + obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o + obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o ++obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o + obj-$(CONFIG_SPI_QUP) += spi-qup.o + obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o + obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o diff --git a/target/linux/ar71xx/patches-4.9/435-spi-vsc7385_driver.patch b/target/linux/ar71xx/patches-4.9/435-spi-vsc7385_driver.patch new file mode 100644 index 0000000000..f9f1f7a1e5 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/435-spi-vsc7385_driver.patch @@ -0,0 +1,24 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -768,6 +768,11 @@ config SPI_RB4XX_CPLD + SPI driver for the Xilinx CPLD chip present on the + MikroTik RB4xx boards. + ++config SPI_VSC7385 ++ tristate "Vitesse VSC7385 ethernet switch driver" ++ help ++ SPI driver for the Vitesse VSC7385 ethernet switch. ++ + # + # Add new SPI protocol masters in alphabetical order above this line + # +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -99,6 +99,7 @@ spi-thunderx-objs := spi-cavium.o spi- + obj-$(CONFIG_SPI_THUNDERX) += spi-thunderx.o + obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o + obj-$(CONFIG_SPI_TXX9) += spi-txx9.o ++obj-$(CONFIG_SPI_VSC7385) += spi-vsc7385.o + obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o + obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o + obj-$(CONFIG_SPI_XLP) += spi-xlp.o diff --git a/target/linux/ar71xx/patches-4.9/440-leds-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-4.9/440-leds-wndr3700-usb-led-driver.patch new file mode 100644 index 0000000000..0bf5b1a7d9 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/440-leds-wndr3700-usb-led-driver.patch @@ -0,0 +1,26 @@ +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -659,6 +659,13 @@ config LEDS_MLXCPLD + This option enabled support for the LEDs on the Mellanox + boards. Say Y to enabled these. + ++config LEDS_WNDR3700_USB ++ tristate "NETGEAR WNDR3700 USB LED driver" ++ depends on LEDS_CLASS && ATH79_MACH_WNDR3700 ++ help ++ This option enables support for the USB LED found on the ++ NETGEAR WNDR3700 board. ++ + comment "LED Triggers" + source "drivers/leds/trigger/Kconfig" + +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -48,6 +48,7 @@ obj-$(CONFIG_LEDS_DA9052) += leds-da905 + obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o + obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o + obj-$(CONFIG_LEDS_PWM) += leds-pwm.o ++obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o + obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o + obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o + obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o diff --git a/target/linux/ar71xx/patches-4.9/441-leds-rb750-led-driver.patch b/target/linux/ar71xx/patches-4.9/441-leds-rb750-led-driver.patch new file mode 100644 index 0000000000..777a0df917 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/441-leds-rb750-led-driver.patch @@ -0,0 +1,23 @@ +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -666,6 +666,10 @@ config LEDS_WNDR3700_USB + This option enables support for the USB LED found on the + NETGEAR WNDR3700 board. + ++config LEDS_RB750 ++ tristate "LED driver for the Mikrotik RouterBOARD 750" ++ depends on LEDS_CLASS && ATH79_MACH_RB750 ++ + comment "LED Triggers" + source "drivers/leds/trigger/Kconfig" + +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -55,6 +55,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt359 + obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o + obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o + obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o ++obj-$(CONFIG_LEDS_RB750) += leds-rb750.o + obj-$(CONFIG_LEDS_NS2) += leds-ns2.o + obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o + obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o diff --git a/target/linux/ar71xx/patches-4.9/450-gpio-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-4.9/450-gpio-nxp-74hc153-gpio-chip-driver.patch new file mode 100644 index 0000000000..41cf75a558 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/450-gpio-nxp-74hc153-gpio-chip-driver.patch @@ -0,0 +1,25 @@ +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -1211,4 +1211,12 @@ config GPIO_VIPERBOARD + + endmenu + ++comment "Other GPIO expanders" ++ ++config GPIO_NXP_74HC153 ++ tristate "NXP 74HC153 Dual 4-input multiplexer" ++ help ++ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This ++ provides a GPIO interface supporting input mode only. ++ + endif +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -83,6 +83,7 @@ obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o + obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o + obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o + obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o ++obj-$(CONFIG_GPIO_NXP_74HC153) += gpio-nxp-74hc153.o + obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o + obj-$(CONFIG_GPIO_OMAP) += gpio-omap.o + obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o diff --git a/target/linux/ar71xx/patches-4.9/451-gpio-74x164-improve-platform-device-support.patch b/target/linux/ar71xx/patches-4.9/451-gpio-74x164-improve-platform-device-support.patch new file mode 100644 index 0000000000..d9cfa888fb --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/451-gpio-74x164-improve-platform-device-support.patch @@ -0,0 +1,117 @@ +--- a/drivers/gpio/gpio-74x164.c ++++ b/drivers/gpio/gpio-74x164.c +@@ -12,6 +12,7 @@ + #include <linux/init.h> + #include <linux/mutex.h> + #include <linux/spi/spi.h> ++#include <linux/spi/74x164.h> + #include <linux/gpio.h> + #include <linux/of_gpio.h> + #include <linux/slab.h> +@@ -103,9 +104,16 @@ static int gen_74x164_direction_output(s + static int gen_74x164_probe(struct spi_device *spi) + { + struct gen_74x164_chip *chip; ++ struct gen_74x164_chip_platform_data *pdata = spi->dev.platform_data; ++ struct device_node *np = spi->dev.of_node; + u32 nregs; + int ret; + ++ if (!np && !pdata) { ++ dev_err(&spi->dev, "No configuration data available.\n"); ++ return -EINVAL; ++ } ++ + /* + * bits_per_word cannot be configured in platform data + */ +@@ -115,17 +123,23 @@ static int gen_74x164_probe(struct spi_d + if (ret < 0) + return ret; + +- if (of_property_read_u32(spi->dev.of_node, "registers-number", +- &nregs)) { +- dev_err(&spi->dev, +- "Missing registers-number property in the DT.\n"); +- return -EINVAL; +- } ++ if (np) { ++ if (of_property_read_u32(np, "registers-number", &nregs)) { ++ dev_err(&spi->dev, ++ "Missing registers-number property in the DT.\n"); ++ return -EINVAL; ++ } ++ } else if (pdata) { ++ nregs = pdata->num_registers; ++ } + + chip = devm_kzalloc(&spi->dev, sizeof(*chip) + nregs, GFP_KERNEL); + if (!chip) + return -ENOMEM; + ++ if (pdata && pdata->init_data) ++ memcpy(chip->buffer, pdata->init_data, chip->registers); ++ + spi_set_drvdata(spi, chip); + + chip->gpio_chip.label = spi->modalias; +@@ -133,7 +147,11 @@ static int gen_74x164_probe(struct spi_d + chip->gpio_chip.get = gen_74x164_get_value; + chip->gpio_chip.set = gen_74x164_set_value; + chip->gpio_chip.set_multiple = gen_74x164_set_multiple; +- chip->gpio_chip.base = -1; ++ if (np) ++ chip->gpio_chip.base = -1; ++ else if (pdata) ++ chip->gpio_chip.base = pdata->base; ++ + + chip->registers = nregs; + chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers; +@@ -170,17 +188,19 @@ static int gen_74x164_remove(struct spi_ + return 0; + } + ++#ifdef CONFIG_OF + static const struct of_device_id gen_74x164_dt_ids[] = { + { .compatible = "fairchild,74hc595" }, + { .compatible = "nxp,74lvc594" }, + {}, + }; + MODULE_DEVICE_TABLE(of, gen_74x164_dt_ids); ++#endif + + static struct spi_driver gen_74x164_driver = { + .driver = { + .name = "74x164", +- .of_match_table = gen_74x164_dt_ids, ++ .of_match_table = of_match_ptr(gen_74x164_dt_ids), + }, + .probe = gen_74x164_probe, + .remove = gen_74x164_remove, +--- /dev/null ++++ b/include/linux/spi/74x164.h +@@ -0,0 +1,13 @@ ++#ifndef LINUX_SPI_74X164_H ++#define LINUX_SPI_74X164_H ++ ++struct gen_74x164_chip_platform_data { ++ /* number assigned to the first GPIO */ ++ unsigned base; ++ /* number of chained registers */ ++ unsigned num_registers; ++ /* address of a buffer containing initial data */ ++ u8 *init_data; ++}; ++ ++#endif +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -1154,7 +1154,6 @@ menu "SPI GPIO expanders" + + config GPIO_74X164 + tristate "74x164 serial-in/parallel-out 8-bits shift register" +- depends on OF_GPIO + help + Driver for 74x164 compatible serial-in/parallel-out 8-outputs + shift registers. This driver can be used to provide access diff --git a/target/linux/ar71xx/patches-4.9/452-gpio-add-gpio-latch-driver.patch b/target/linux/ar71xx/patches-4.9/452-gpio-add-gpio-latch-driver.patch new file mode 100644 index 0000000000..5ddf6de928 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/452-gpio-add-gpio-latch-driver.patch @@ -0,0 +1,22 @@ +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -1218,4 +1218,9 @@ config GPIO_NXP_74HC153 + Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This + provides a GPIO interface supporting input mode only. + ++config GPIO_LATCH ++ tristate "GPIO latch driver" ++ help ++ Say yes here to enable a GPIO latch driver. ++ + endif +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz + obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o + obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o + obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o ++obj-$(CONFIG_GPIO_LATCH) += gpio-latch.o + obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o + obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o + obj-$(CONFIG_GPIO_LPC18XX) += gpio-lpc18xx.o diff --git a/target/linux/ar71xx/patches-4.9/461-spi-ath79-add-fast-flash-read.patch b/target/linux/ar71xx/patches-4.9/461-spi-ath79-add-fast-flash-read.patch new file mode 100644 index 0000000000..0dc73a8b5b --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/461-spi-ath79-add-fast-flash-read.patch @@ -0,0 +1,54 @@ +--- a/drivers/spi/spi-ath79.c ++++ b/drivers/spi/spi-ath79.c +@@ -102,9 +102,6 @@ static void ath79_spi_enable(struct ath7 + /* save CTRL register */ + sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL); + sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC); +- +- /* TODO: setup speed? */ +- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43); + } + + static void ath79_spi_disable(struct ath79_spi *sp) +@@ -205,6 +202,33 @@ static u32 ath79_spi_txrx_mode0(struct s + return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS); + } + ++static int ath79_spi_read_flash_data(struct spi_device *spi, ++ struct spi_flash_read_message *msg) ++{ ++ struct ath79_spi *sp = ath79_spidev_to_sp(spi); ++ ++ if (msg->addr_width > 3) ++ return -EOPNOTSUPP; ++ ++ if (spi->chip_select || gpio_is_valid(spi->cs_gpio)) ++ return -EOPNOTSUPP; ++ ++ /* disable GPIO mode */ ++ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0); ++ ++ memcpy_fromio(msg->buf, sp->base + msg->from, msg->len); ++ ++ /* enable GPIO mode */ ++ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO); ++ ++ /* restore IOC register */ ++ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); ++ ++ msg->retlen = msg->len; ++ ++ return 0; ++} ++ + static int ath79_spi_probe(struct platform_device *pdev) + { + struct spi_master *master; +@@ -234,6 +258,7 @@ static int ath79_spi_probe(struct platfo + master->num_chipselect = pdata->num_chipselect; + master->cs_gpios = pdata->cs_gpios; + } ++ master->spi_flash_read = ath79_spi_read_flash_data; + + sp->bitbang.master = master; + sp->bitbang.chipselect = ath79_spi_chipselect; diff --git a/target/linux/ar71xx/patches-4.9/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch b/target/linux/ar71xx/patches-4.9/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch new file mode 100644 index 0000000000..520c652059 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch @@ -0,0 +1,111 @@ +--- /dev/null ++++ b/arch/mips/include/asm/mach-ath79/mangle-port.h +@@ -0,0 +1,37 @@ ++/* ++ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> ++ * ++ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h ++ * Copyright (C) 2003, 2004 Ralf Baechle ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H ++#define __ASM_MACH_ATH79_MANGLE_PORT_H ++ ++#ifdef CONFIG_PCI ++extern unsigned long (ath79_pci_swizzle_b)(unsigned long port); ++extern unsigned long (ath79_pci_swizzle_w)(unsigned long port); ++#else ++#define ath79_pci_swizzle_b(port) (port) ++#define ath79_pci_swizzle_w(port) (port) ++#endif ++ ++#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port) ++#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port) ++#define __swizzle_addr_l(port) (port) ++#define __swizzle_addr_q(port) (port) ++ ++# define ioswabb(a, x) (x) ++# define __mem_ioswabb(a, x) (x) ++# define ioswabw(a, x) (x) ++# define __mem_ioswabw(a, x) cpu_to_le16(x) ++# define ioswabl(a, x) (x) ++# define __mem_ioswabl(a, x) cpu_to_le32(x) ++# define ioswabq(a, x) (x) ++# define __mem_ioswabq(a, x) cpu_to_le64(x) ++ ++#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */ +--- a/arch/mips/ath79/pci.c ++++ b/arch/mips/ath79/pci.c +@@ -13,6 +13,7 @@ + */ + + #include <linux/init.h> ++#include <linux/export.h> + #include <linux/pci.h> + #include <linux/resource.h> + #include <linux/platform_device.h> +@@ -25,6 +26,9 @@ static int (*ath79_pci_plat_dev_init)(st + static const struct ath79_pci_irq *ath79_pci_irq_map __initdata; + static unsigned ath79_pci_nr_irqs __initdata; + ++static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port); ++static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port); ++ + static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = { + { + .slot = 17, +@@ -212,12 +216,50 @@ ath79_register_pci_ar724x(int id, + return pdev; + } + ++static inline bool ar71xx_is_pci_addr(unsigned long port) ++{ ++ unsigned long phys = CPHYSADDR(port); ++ ++ return (phys >= AR71XX_PCI_MEM_BASE && ++ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE); ++} ++ ++static unsigned long ar71xx_pci_swizzle_b(unsigned long port) ++{ ++ return ar71xx_is_pci_addr(port) ? port ^ 3 : port; ++} ++ ++static unsigned long ar71xx_pci_swizzle_w(unsigned long port) ++{ ++ return ar71xx_is_pci_addr(port) ? port ^ 2 : port; ++} ++ ++unsigned long ath79_pci_swizzle_b(unsigned long port) ++{ ++ if (__ath79_pci_swizzle_b) ++ return __ath79_pci_swizzle_b(port); ++ ++ return port; ++} ++EXPORT_SYMBOL(ath79_pci_swizzle_b); ++ ++unsigned long ath79_pci_swizzle_w(unsigned long port) ++{ ++ if (__ath79_pci_swizzle_w) ++ return __ath79_pci_swizzle_w(port); ++ ++ return port; ++} ++EXPORT_SYMBOL(ath79_pci_swizzle_w); ++ + int __init ath79_register_pci(void) + { + struct platform_device *pdev = NULL; + + if (soc_is_ar71xx()) { + pdev = ath79_register_pci_ar71xx(); ++ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b; ++ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w; + } else if (soc_is_ar724x()) { + pdev = ath79_register_pci_ar724x(-1, + AR724X_PCI_CFG_BASE, diff --git a/target/linux/ar71xx/patches-4.9/490-usb-ehci-add-quirks-for-qca-socs.patch b/target/linux/ar71xx/patches-4.9/490-usb-ehci-add-quirks-for-qca-socs.patch new file mode 100644 index 0000000000..8a05adb050 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/490-usb-ehci-add-quirks-for-qca-socs.patch @@ -0,0 +1,103 @@ +--- a/drivers/usb/host/ehci-hcd.c ++++ b/drivers/usb/host/ehci-hcd.c +@@ -252,6 +252,37 @@ int ehci_reset(struct ehci_hcd *ehci) + command |= CMD_RESET; + dbg_cmd (ehci, "reset", command); + ehci_writel(ehci, command, &ehci->regs->command); ++ ++ if (ehci->qca_force_host_mode) { ++ u32 usbmode; ++ ++ udelay(1000); ++ ++ usbmode = ehci_readl(ehci, &ehci->regs->usbmode); ++ usbmode |= USBMODE_CM_HC | (1 << 4); ++ ehci_writel(ehci, usbmode, &ehci->regs->usbmode); ++ ++ ehci_dbg(ehci, "forced host mode, usbmode: %08x\n", ++ ehci_readl(ehci, &ehci->regs->usbmode)); ++ } ++ ++ if (ehci->qca_force_16bit_ptw) { ++ u32 port_status; ++ ++ udelay(1000); ++ ++ /* enable 16-bit UTMI interface */ ++ port_status = ehci_readl(ehci, &ehci->regs->port_status[0]); ++ port_status |= BIT(28); ++ ehci_writel(ehci, port_status, &ehci->regs->port_status[0]); ++ ++ ehci_dbg(ehci, "16-bit UTMI interface enabled, status: %08x\n", ++ ehci_readl(ehci, &ehci->regs->port_status[0])); ++ } ++ ++ if (ehci->reset_notifier) ++ ehci->reset_notifier(ehci_to_hcd(ehci)); ++ + ehci->rh_state = EHCI_RH_HALTED; + ehci->next_statechange = jiffies; + retval = ehci_handshake(ehci, &ehci->regs->command, +--- a/drivers/usb/host/ehci.h ++++ b/drivers/usb/host/ehci.h +@@ -231,6 +231,10 @@ struct ehci_hcd { /* one per controlle + unsigned need_oc_pp_cycle:1; /* MPC834X port power */ + unsigned imx28_write_fix:1; /* For Freescale i.MX28 */ + unsigned ignore_oc:1; ++ unsigned qca_force_host_mode:1; ++ unsigned qca_force_16bit_ptw:1; /* force 16 bit UTMI */ ++ ++ void (*reset_notifier)(struct usb_hcd *hcd); + + /* required for usb32 quirk */ + #define OHCI_CTRL_HCFS (3 << 6) +--- a/include/linux/usb/ehci_pdriver.h ++++ b/include/linux/usb/ehci_pdriver.h +@@ -50,6 +50,8 @@ struct usb_ehci_pdata { + unsigned reset_on_resume:1; + unsigned dma_mask_64:1; + unsigned ignore_oc:1; ++ unsigned qca_force_host_mode:1; ++ unsigned qca_force_16bit_ptw:1; + + /* Turn on all power and clocks */ + int (*power_on)(struct platform_device *pdev); +@@ -59,6 +61,7 @@ struct usb_ehci_pdata { + * turn off everything else */ + void (*power_suspend)(struct platform_device *pdev); + int (*pre_setup)(struct usb_hcd *hcd); ++ void (*reset_notifier)(struct platform_device *pdev); + }; + + #endif /* __USB_CORE_EHCI_PDRIVER_H */ +--- a/drivers/usb/host/ehci-platform.c ++++ b/drivers/usb/host/ehci-platform.c +@@ -52,6 +52,14 @@ struct ehci_platform_priv { + + static const char hcd_name[] = "ehci-platform"; + ++static void ehci_platform_reset_notifier(struct usb_hcd *hcd) ++{ ++ struct platform_device *pdev = to_platform_device(hcd->self.controller); ++ struct usb_ehci_pdata *pdata = pdev->dev.platform_data; ++ ++ pdata->reset_notifier(pdev); ++} ++ + static int ehci_platform_reset(struct usb_hcd *hcd) + { + struct platform_device *pdev = to_platform_device(hcd->self.controller); +@@ -261,6 +269,13 @@ static int ehci_platform_probe(struct pl + priv->reset_on_resume = true; + if (pdata->ignore_oc) + ehci->ignore_oc = 1; ++ if (pdata->qca_force_host_mode) ++ ehci->qca_force_host_mode = 1; ++ if (pdata->qca_force_16bit_ptw) ++ ehci->qca_force_16bit_ptw = 1; ++ ++ if (pdata->reset_notifier) ++ ehci->reset_notifier = ehci_platform_reset_notifier; + + #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO + if (ehci->big_endian_mmio) { diff --git a/target/linux/ar71xx/patches-4.9/500-MIPS-fw-myloader.patch b/target/linux/ar71xx/patches-4.9/500-MIPS-fw-myloader.patch new file mode 100644 index 0000000000..bcb19372ef --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/500-MIPS-fw-myloader.patch @@ -0,0 +1,22 @@ +--- a/arch/mips/Makefile ++++ b/arch/mips/Makefile +@@ -213,6 +213,7 @@ cflags-$(toolchain-virt) += -DTOOLCHAIN + # + libs-$(CONFIG_FW_ARC) += arch/mips/fw/arc/ + libs-$(CONFIG_FW_CFE) += arch/mips/fw/cfe/ ++libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/ + libs-$(CONFIG_FW_SNIPROM) += arch/mips/fw/sni/ + libs-y += arch/mips/fw/lib/ + +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -1144,6 +1144,9 @@ config MIPS_MSC + config MIPS_NILE4 + bool + ++config MYLOADER ++ bool ++ + config SYNC_R4K + bool + diff --git a/target/linux/ar71xx/patches-4.9/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch b/target/linux/ar71xx/patches-4.9/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch new file mode 100644 index 0000000000..12ab3b50d6 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch @@ -0,0 +1,70 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -15,6 +15,7 @@ + #include <linux/init.h> + #include <linux/delay.h> + #include <linux/irq.h> ++#include <linux/etherdevice.h> + #include <linux/platform_device.h> + #include <linux/ath9k_platform.h> + +@@ -22,6 +23,7 @@ + #include <asm/mach-ath79/ar71xx_regs.h> + #include "dev-wmac.h" + ++static u8 ath79_wmac_mac[ETH_ALEN]; + static struct ath9k_platform_data ath79_wmac_data; + + static struct resource ath79_wmac_resources[] = { +@@ -161,7 +163,7 @@ static void qca955x_wmac_setup(void) + ath79_wmac_data.is_clk_25mhz = true; + } + +-void __init ath79_register_wmac(u8 *cal_data) ++void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) + { + if (soc_is_ar913x()) + ar913x_wmac_setup(); +@@ -178,5 +180,10 @@ void __init ath79_register_wmac(u8 *cal_ + memcpy(ath79_wmac_data.eeprom_data, cal_data, + sizeof(ath79_wmac_data.eeprom_data)); + ++ if (mac_addr) { ++ memcpy(ath79_wmac_mac, mac_addr, sizeof(ath79_wmac_mac)); ++ ath79_wmac_data.macaddr = ath79_wmac_mac; ++ } ++ + platform_device_register(&ath79_wmac_device); + } +--- a/arch/mips/ath79/dev-wmac.h ++++ b/arch/mips/ath79/dev-wmac.h +@@ -12,6 +12,6 @@ + #ifndef _ATH79_DEV_WMAC_H + #define _ATH79_DEV_WMAC_H + +-void ath79_register_wmac(u8 *cal_data); ++void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); + + #endif /* _ATH79_DEV_WMAC_H */ +--- a/arch/mips/ath79/mach-db120.c ++++ b/arch/mips/ath79/mach-db120.c +@@ -128,7 +128,7 @@ static void __init db120_setup(void) + ath79_register_spi(&db120_spi_data, db120_spi_info, + ARRAY_SIZE(db120_spi_info)); + ath79_register_usb(); +- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET); ++ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL); + db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET); + } + +--- a/arch/mips/ath79/mach-ap121.c ++++ b/arch/mips/ath79/mach-ap121.c +@@ -85,7 +85,7 @@ static void __init ap121_setup(void) + ath79_register_spi(&ap121_spi_data, ap121_spi_info, + ARRAY_SIZE(ap121_spi_info)); + ath79_register_usb(); +- ath79_register_wmac(cal_data); ++ ath79_register_wmac(cal_data, NULL); + } + + MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board", diff --git a/target/linux/ar71xx/patches-4.9/504-MIPS-ath79-add-ath79_device_reset_get.patch b/target/linux/ar71xx/patches-4.9/504-MIPS-ath79-add-ath79_device_reset_get.patch new file mode 100644 index 0000000000..c0e96b2729 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/504-MIPS-ath79-add-ath79_device_reset_get.patch @@ -0,0 +1,42 @@ +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -145,6 +145,7 @@ static inline u32 ath79_reset_rr(unsigne + + void ath79_device_reset_set(u32 mask); + void ath79_device_reset_clear(u32 mask); ++u32 ath79_device_reset_get(u32 mask); + + void ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3); + void ath79_misc_irq_init(void __iomem *regs, int irq, +--- a/arch/mips/ath79/common.c ++++ b/arch/mips/ath79/common.c +@@ -142,3 +142,29 @@ void ath79_device_reset_clear(u32 mask) + spin_unlock_irqrestore(&ath79_device_reset_lock, flags); + } + EXPORT_SYMBOL_GPL(ath79_device_reset_clear); ++ ++u32 ath79_device_reset_get(u32 mask) ++{ ++ unsigned long flags; ++ u32 reg; ++ u32 ret; ++ ++ if (soc_is_ar71xx()) ++ reg = AR71XX_RESET_REG_RESET_MODULE; ++ else if (soc_is_ar724x()) ++ reg = AR724X_RESET_REG_RESET_MODULE; ++ else if (soc_is_ar913x()) ++ reg = AR913X_RESET_REG_RESET_MODULE; ++ else if (soc_is_ar933x()) ++ reg = AR933X_RESET_REG_RESET_MODULE; ++ else if (soc_is_ar934x()) ++ reg = AR934X_RESET_REG_RESET_MODULE; ++ else ++ BUG(); ++ ++ spin_lock_irqsave(&ath79_device_reset_lock, flags); ++ ret = ath79_reset_rr(reg); ++ spin_unlock_irqrestore(&ath79_device_reset_lock, flags); ++ return ret; ++} ++EXPORT_SYMBOL_GPL(ath79_device_reset_get); diff --git a/target/linux/ar71xx/patches-4.9/505-MIPS-ath79-add-ath79_gpio_function_select.patch b/target/linux/ar71xx/patches-4.9/505-MIPS-ath79-add-ath79_gpio_function_select.patch new file mode 100644 index 0000000000..278e781539 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/505-MIPS-ath79-add-ath79_gpio_function_select.patch @@ -0,0 +1,39 @@ +--- a/arch/mips/ath79/common.h ++++ b/arch/mips/ath79/common.h +@@ -27,6 +27,7 @@ void ath79_ddr_ctrl_init(void); + void ath79_gpio_function_enable(u32 mask); + void ath79_gpio_function_disable(u32 mask); + void ath79_gpio_function_setup(u32 set, u32 clear); ++void ath79_gpio_output_select(unsigned gpio, u8 val); + void ath79_gpio_init(void); + + #endif /* __ATH79_COMMON_H */ +--- a/arch/mips/ath79/gpio.c ++++ b/arch/mips/ath79/gpio.c +@@ -57,3 +57,26 @@ void ath79_gpio_function_disable(u32 mas + { + ath79_gpio_function_setup(0, mask); + } ++ ++void __init ath79_gpio_output_select(unsigned gpio, u8 val) ++{ ++ void __iomem *base = ath79_gpio_base; ++ unsigned int reg; ++ u32 t, s; ++ ++ BUG_ON(!soc_is_ar934x()); ++ ++ if (gpio >= AR934X_GPIO_COUNT) ++ return; ++ ++ reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4); ++ s = 8 * (gpio % 4); ++ ++ t = __raw_readl(base + reg); ++ t &= ~(0xff << s); ++ t |= val << s; ++ __raw_writel(t, base + reg); ++ ++ /* flush write */ ++ (void) __raw_readl(base + reg); ++} diff --git a/target/linux/ar71xx/patches-4.9/506-MIPS-ath79-prom-parse-redboot-args.patch b/target/linux/ar71xx/patches-4.9/506-MIPS-ath79-prom-parse-redboot-args.patch new file mode 100644 index 0000000000..46beeffeea --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/506-MIPS-ath79-prom-parse-redboot-args.patch @@ -0,0 +1,42 @@ +--- a/arch/mips/ath79/prom.c ++++ b/arch/mips/ath79/prom.c +@@ -22,10 +22,39 @@ + + #include "common.h" + ++static char ath79_cmdline_buf[COMMAND_LINE_SIZE] __initdata; ++ ++static void __init ath79_prom_append_cmdline(const char *name, ++ const char *value) ++{ ++ snprintf(ath79_cmdline_buf, sizeof(ath79_cmdline_buf), ++ " %s=%s", name, value); ++ strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline)); ++} ++ + void __init prom_init(void) + { ++ const char *env; ++ + fw_init_cmdline(); + ++ env = fw_getenv("ethaddr"); ++ if (env) ++ ath79_prom_append_cmdline("ethaddr", env); ++ ++ env = fw_getenv("board"); ++ if (env) { ++ /* Workaround for buggy bootloaders */ ++ if (strcmp(env, "RouterStation") == 0 || ++ strcmp(env, "Ubiquiti AR71xx-based board") == 0) ++ env = "UBNT-RS"; ++ ++ if (strcmp(env, "RouterStation PRO") == 0) ++ env = "UBNT-RSPRO"; ++ ++ ath79_prom_append_cmdline("board", env); ++ } ++ + #ifdef CONFIG_BLK_DEV_INITRD + /* Read the initrd address from the firmware environment */ + initrd_start = fw_getenvl("initrd_start"); diff --git a/target/linux/ar71xx/patches-4.9/507-MIPS-ath79-prom-add-myloader-support.patch b/target/linux/ar71xx/patches-4.9/507-MIPS-ath79-prom-add-myloader-support.patch new file mode 100644 index 0000000000..17a97335d2 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/507-MIPS-ath79-prom-add-myloader-support.patch @@ -0,0 +1,55 @@ +--- a/arch/mips/ath79/prom.c ++++ b/arch/mips/ath79/prom.c +@@ -19,6 +19,7 @@ + #include <asm/bootinfo.h> + #include <asm/addrspace.h> + #include <asm/fw/fw.h> ++#include <asm/fw/myloader/myloader.h> + + #include "common.h" + +@@ -32,10 +33,44 @@ static void __init ath79_prom_append_cmd + strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline)); + } + ++static int __init ath79_prom_init_myloader(void) ++{ ++ struct myloader_info *mylo; ++ char mac_buf[32]; ++ unsigned char *mac; ++ ++ mylo = myloader_get_info(); ++ if (!mylo) ++ return 0; ++ ++ switch (mylo->did) { ++ case DEVID_COMPEX_WP543: ++ ath79_prom_append_cmdline("board", "WP543"); ++ break; ++ case DEVID_COMPEX_WPE72: ++ ath79_prom_append_cmdline("board", "WPE72"); ++ break; ++ default: ++ pr_warn("prom: unknown device id: %x\n", mylo->did); ++ return 0; ++ } ++ ++ mac = mylo->macs[0]; ++ snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x", ++ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); ++ ++ ath79_prom_append_cmdline("ethaddr", mac_buf); ++ ++ return 1; ++} ++ + void __init prom_init(void) + { + const char *env; + ++ if (ath79_prom_init_myloader()) ++ return; ++ + fw_init_cmdline(); + + env = fw_getenv("ethaddr"); diff --git a/target/linux/ar71xx/patches-4.9/508-MIPS-ath79-prom-image-command-line-hack.patch b/target/linux/ar71xx/patches-4.9/508-MIPS-ath79-prom-image-command-line-hack.patch new file mode 100644 index 0000000000..cfa5e72eec --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/508-MIPS-ath79-prom-image-command-line-hack.patch @@ -0,0 +1,73 @@ +--- a/arch/mips/ath79/prom.c ++++ b/arch/mips/ath79/prom.c +@@ -33,6 +33,41 @@ static void __init ath79_prom_append_cmd + strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline)); + } + ++#ifdef CONFIG_IMAGE_CMDLINE_HACK ++extern char __image_cmdline[]; ++ ++static int __init ath79_use_image_cmdline(void) ++{ ++ char *p = __image_cmdline; ++ int replace = 0; ++ ++ if (*p == '-') { ++ replace = 1; ++ p++; ++ } ++ ++ if (*p == '\0') ++ return 0; ++ ++ if (replace) { ++ strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline)); ++ } else { ++ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); ++ strlcat(arcs_cmdline, p, sizeof(arcs_cmdline)); ++ } ++ ++ /* Validate and setup environment pointer */ ++ if (fw_arg2 < CKSEG0) ++ _fw_envp = NULL; ++ else ++ _fw_envp = (int *)fw_arg2; ++ ++ return 1; ++} ++#else ++static inline int ath79_use_image_cmdline(void) { return 0; } ++#endif ++ + static int __init ath79_prom_init_myloader(void) + { + struct myloader_info *mylo; +@@ -61,6 +96,8 @@ static int __init ath79_prom_init_myload + + ath79_prom_append_cmdline("ethaddr", mac_buf); + ++ ath79_use_image_cmdline(); ++ + return 1; + } + +@@ -71,7 +108,8 @@ void __init prom_init(void) + if (ath79_prom_init_myloader()) + return; + +- fw_init_cmdline(); ++ if (!ath79_use_image_cmdline()) ++ fw_init_cmdline(); + + env = fw_getenv("ethaddr"); + if (env) +--- a/arch/mips/fw/lib/cmdline.c ++++ b/arch/mips/fw/lib/cmdline.c +@@ -35,6 +35,7 @@ void __init fw_init_cmdline(void) + else + _fw_envp = (int *)fw_arg2; + ++ arcs_cmdline[0] = '\0'; + for (i = 1; i < fw_argc; i++) { + strlcat(arcs_cmdline, fw_argv(i), COMMAND_LINE_SIZE); + if (i < (fw_argc - 1)) diff --git a/target/linux/ar71xx/patches-4.9/509-MIPS-ath79-process-board-kernel-option.patch b/target/linux/ar71xx/patches-4.9/509-MIPS-ath79-process-board-kernel-option.patch new file mode 100644 index 0000000000..3091ab69b6 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/509-MIPS-ath79-process-board-kernel-option.patch @@ -0,0 +1,11 @@ +--- a/arch/mips/ath79/setup.c ++++ b/arch/mips/ath79/setup.c +@@ -283,6 +283,8 @@ void __init plat_time_init(void) + mips_hpt_frequency = cpu_clk_rate / 2; + } + ++__setup("board=", mips_machtype_setup); ++ + static int __init ath79_setup(void) + { + if (mips_machtype == ATH79_MACH_GENERIC_OF) diff --git a/target/linux/ar71xx/patches-4.9/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch b/target/linux/ar71xx/patches-4.9/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch new file mode 100644 index 0000000000..2d2235e292 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch @@ -0,0 +1,14 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -24,7 +24,10 @@ + #include "dev-wmac.h" + + static u8 ath79_wmac_mac[ETH_ALEN]; +-static struct ath9k_platform_data ath79_wmac_data; ++ ++static struct ath9k_platform_data ath79_wmac_data = { ++ .led_pin = -1, ++}; + + static struct resource ath79_wmac_resources[] = { + { diff --git a/target/linux/ar71xx/patches-4.9/520-MIPS-ath79-enable-UART-function.patch b/target/linux/ar71xx/patches-4.9/520-MIPS-ath79-enable-UART-function.patch new file mode 100644 index 0000000000..c8649b7494 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/520-MIPS-ath79-enable-UART-function.patch @@ -0,0 +1,18 @@ +--- a/arch/mips/ath79/dev-common.c ++++ b/arch/mips/ath79/dev-common.c +@@ -81,6 +81,15 @@ void __init ath79_register_uart(void) + + uart_clk_rate = ath79_get_sys_clk_rate("uart"); + ++ if (soc_is_ar71xx()) ++ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_UART_EN); ++ else if (soc_is_ar724x()) ++ ath79_gpio_function_enable(AR724X_GPIO_FUNC_UART_EN); ++ else if (soc_is_ar913x()) ++ ath79_gpio_function_enable(AR913X_GPIO_FUNC_UART_EN); ++ else if (soc_is_ar933x()) ++ ath79_gpio_function_enable(AR933X_GPIO_FUNC_UART_EN); ++ + if (soc_is_ar71xx() || + soc_is_ar724x() || + soc_is_ar913x() || diff --git a/target/linux/ar71xx/patches-4.9/521-MIPS-ath79-enable-UART-for-early_serial.patch b/target/linux/ar71xx/patches-4.9/521-MIPS-ath79-enable-UART-for-early_serial.patch new file mode 100644 index 0000000000..e546ff26fe --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/521-MIPS-ath79-enable-UART-for-early_serial.patch @@ -0,0 +1,61 @@ +--- a/arch/mips/ath79/early_printk.c ++++ b/arch/mips/ath79/early_printk.c +@@ -58,6 +58,46 @@ static void prom_putchar_dummy(unsigned + /* nothing to do */ + } + ++static void prom_enable_uart(u32 id) ++{ ++ void __iomem *gpio_base; ++ u32 uart_en; ++ u32 t; ++ ++ switch (id) { ++ case REV_ID_MAJOR_AR71XX: ++ uart_en = AR71XX_GPIO_FUNC_UART_EN; ++ break; ++ ++ case REV_ID_MAJOR_AR7240: ++ case REV_ID_MAJOR_AR7241: ++ case REV_ID_MAJOR_AR7242: ++ uart_en = AR724X_GPIO_FUNC_UART_EN; ++ break; ++ ++ case REV_ID_MAJOR_AR913X: ++ uart_en = AR913X_GPIO_FUNC_UART_EN; ++ break; ++ ++ case REV_ID_MAJOR_AR9330: ++ case REV_ID_MAJOR_AR9331: ++ uart_en = AR933X_GPIO_FUNC_UART_EN; ++ break; ++ ++ case REV_ID_MAJOR_AR9341: ++ case REV_ID_MAJOR_AR9342: ++ case REV_ID_MAJOR_AR9344: ++ /* TODO */ ++ default: ++ return; ++ } ++ ++ gpio_base = (void __iomem *)(KSEG1ADDR(AR71XX_GPIO_BASE)); ++ t = __raw_readl(gpio_base + AR71XX_GPIO_REG_FUNC); ++ t |= uart_en; ++ __raw_writel(t, gpio_base + AR71XX_GPIO_REG_FUNC); ++} ++ + static void prom_putchar_init(void) + { + void __iomem *base; +@@ -88,8 +128,10 @@ static void prom_putchar_init(void) + + default: + _prom_putchar = prom_putchar_dummy; +- break; ++ return; + } ++ ++ prom_enable_uart(id); + } + + void prom_putchar(unsigned char ch) diff --git a/target/linux/ar71xx/patches-4.9/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch b/target/linux/ar71xx/patches-4.9/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch new file mode 100644 index 0000000000..2d5559cb9d --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch @@ -0,0 +1,21 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -190,3 +190,9 @@ void __init ath79_register_wmac(u8 *cal_ + + platform_device_register(&ath79_wmac_device); + } ++ ++void __init ath79_register_wmac_simple(void) ++{ ++ ath79_register_wmac(NULL, NULL); ++ ath79_wmac_data.eeprom_name = "soc_wmac.eeprom"; ++} +--- a/arch/mips/ath79/dev-wmac.h ++++ b/arch/mips/ath79/dev-wmac.h +@@ -13,5 +13,6 @@ + #define _ATH79_DEV_WMAC_H + + void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); ++void ath79_register_wmac_simple(void); + + #endif /* _ATH79_DEV_WMAC_H */ diff --git a/target/linux/ar71xx/patches-4.9/523-MIPS-ath79-OTP-support.patch b/target/linux/ar71xx/patches-4.9/523-MIPS-ath79-OTP-support.patch new file mode 100644 index 0000000000..d11d418f17 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/523-MIPS-ath79-OTP-support.patch @@ -0,0 +1,192 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -166,6 +166,149 @@ static void qca955x_wmac_setup(void) + ath79_wmac_data.is_clk_25mhz = true; + } + ++#define AR93XX_WMAC_SIZE \ ++ (soc_is_ar934x() ? AR934X_WMAC_SIZE : AR933X_WMAC_SIZE) ++#define AR93XX_WMAC_BASE \ ++ (soc_is_ar934x() ? AR934X_WMAC_BASE : AR933X_WMAC_BASE) ++ ++#define AR93XX_OTP_BASE \ ++ (soc_is_ar934x() ? AR934X_OTP_BASE : AR9300_OTP_BASE) ++#define AR93XX_OTP_STATUS \ ++ (soc_is_ar934x() ? AR934X_OTP_STATUS : AR9300_OTP_STATUS) ++#define AR93XX_OTP_READ_DATA \ ++ (soc_is_ar934x() ? AR934X_OTP_READ_DATA : AR9300_OTP_READ_DATA) ++ ++static bool __init ++ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data) ++{ ++ int timeout = 1000; ++ u32 val; ++ ++ __raw_readl(base + AR93XX_OTP_BASE + (4 * addr)); ++ while (timeout--) { ++ val = __raw_readl(base + AR93XX_OTP_STATUS); ++ if ((val & AR9300_OTP_STATUS_TYPE) == AR9300_OTP_STATUS_VALID) ++ break; ++ ++ udelay(10); ++ } ++ ++ if (!timeout) ++ return false; ++ ++ *data = __raw_readl(base + AR93XX_OTP_READ_DATA); ++ return true; ++} ++ ++static bool __init ++ar93xx_wmac_otp_read(void __iomem *base, int addr, u8 *dest, int len) ++{ ++ u32 data; ++ int i; ++ ++ for (i = 0; i < len; i++) { ++ int offset = 8 * ((addr - i) % 4); ++ ++ if (!ar93xx_wmac_otp_read_word(base, (addr - i) / 4, &data)) ++ return false; ++ ++ dest[i] = (data >> offset) & 0xff; ++ } ++ ++ return true; ++} ++ ++static bool __init ++ar93xx_wmac_otp_uncompress(void __iomem *base, int addr, int len, u8 *dest, ++ int dest_start, int dest_len) ++{ ++ int dest_bytes = 0; ++ int offset = 0; ++ int end = addr - len; ++ u8 hdr[2]; ++ ++ while (addr > end) { ++ if (!ar93xx_wmac_otp_read(base, addr, hdr, 2)) ++ return false; ++ ++ addr -= 2; ++ offset += hdr[0]; ++ ++ if (offset <= dest_start + dest_len && ++ offset + len >= dest_start) { ++ int data_offset = 0; ++ int dest_offset = 0; ++ int copy_len; ++ ++ if (offset < dest_start) ++ data_offset = dest_start - offset; ++ else ++ dest_offset = offset - dest_start; ++ ++ copy_len = len - data_offset; ++ if (copy_len > dest_len - dest_offset) ++ copy_len = dest_len - dest_offset; ++ ++ ar93xx_wmac_otp_read(base, addr - data_offset, ++ dest + dest_offset, ++ copy_len); ++ ++ dest_bytes += copy_len; ++ } ++ addr -= hdr[1]; ++ } ++ return !!dest_bytes; ++} ++ ++bool __init ar93xx_wmac_read_mac_address(u8 *dest) ++{ ++ void __iomem *base; ++ bool ret = false; ++ int addr = 0x1ff; ++ unsigned int len; ++ u32 hdr_u32; ++ u8 *hdr = (u8 *) &hdr_u32; ++ u8 mac[6] = { 0x00, 0x02, 0x03, 0x04, 0x05, 0x06 }; ++ int mac_start = 2, mac_end = 8; ++ ++ BUG_ON(!soc_is_ar933x() && !soc_is_ar934x()); ++ base = ioremap_nocache(AR93XX_WMAC_BASE, AR93XX_WMAC_SIZE); ++ while (addr > sizeof(hdr_u32)) { ++ if (!ar93xx_wmac_otp_read(base, addr, hdr, sizeof(hdr_u32))) ++ break; ++ ++ if (hdr_u32 == 0 || hdr_u32 == ~0) ++ break; ++ ++ len = (hdr[1] << 4) | (hdr[2] >> 4); ++ addr -= 4; ++ ++ switch (hdr[0] >> 5) { ++ case 0: ++ if (len < mac_end) ++ break; ++ ++ ar93xx_wmac_otp_read(base, addr - mac_start, mac, 6); ++ ret = true; ++ break; ++ case 3: ++ ret |= ar93xx_wmac_otp_uncompress(base, addr, len, mac, ++ mac_start, 6); ++ break; ++ default: ++ break; ++ } ++ ++ addr -= len + 2; ++ } ++ ++ iounmap(base); ++ if (ret) ++ memcpy(dest, mac, 6); ++ ++ return ret; ++} ++ + void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) + { + if (soc_is_ar913x()) +--- a/arch/mips/ath79/dev-wmac.h ++++ b/arch/mips/ath79/dev-wmac.h +@@ -14,5 +14,6 @@ + + void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); + void ath79_register_wmac_simple(void); ++bool ar93xx_wmac_read_mac_address(u8 *dest); + + #endif /* _ATH79_DEV_WMAC_H */ +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -112,6 +112,14 @@ + #define QCA955X_EHCI1_BASE 0x1b400000 + #define QCA955X_EHCI_SIZE 0x1000 + ++#define AR9300_OTP_BASE 0x14000 ++#define AR9300_OTP_STATUS 0x15f18 ++#define AR9300_OTP_STATUS_TYPE 0x7 ++#define AR9300_OTP_STATUS_VALID 0x4 ++#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2 ++#define AR9300_OTP_STATUS_SM_BUSY 0x1 ++#define AR9300_OTP_READ_DATA 0x15f1c ++ + /* + * DDR_CTRL block + */ +@@ -149,6 +157,13 @@ + #define AR934X_DDR_REG_FLUSH_PCIE 0xa8 + #define AR934X_DDR_REG_FLUSH_WMAC 0xac + ++#define AR934X_OTP_BASE 0x30000 ++#define AR934X_OTP_STATUS 0x31018 ++#define AR934X_OTP_READ_DATA 0x3101c ++#define AR934X_OTP_INTF2_ADDRESS 0x31008 ++#define AR934X_OTP_INTF3_ADDRESS 0x3100c ++#define AR934X_OTP_PGENB_SETUP_HOLD_TIME_ADDRESS 0x31034 ++ + /* + * PLL block + */ diff --git a/target/linux/ar71xx/patches-4.9/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch b/target/linux/ar71xx/patches-4.9/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch new file mode 100644 index 0000000000..91e037e247 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch @@ -0,0 +1,31 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -309,6 +309,16 @@ bool __init ar93xx_wmac_read_mac_address + return ret; + } + ++void __init ath79_wmac_disable_2ghz(void) ++{ ++ ath79_wmac_data.disable_2ghz = true; ++} ++ ++void __init ath79_wmac_disable_5ghz(void) ++{ ++ ath79_wmac_data.disable_5ghz = true; ++} ++ + void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) + { + if (soc_is_ar913x()) +--- a/arch/mips/ath79/dev-wmac.h ++++ b/arch/mips/ath79/dev-wmac.h +@@ -14,6 +14,9 @@ + + void ath79_register_wmac(u8 *cal_data, u8 *mac_addr); + void ath79_register_wmac_simple(void); ++void ath79_wmac_disable_2ghz(void); ++void ath79_wmac_disable_5ghz(void); ++ + bool ar93xx_wmac_read_mac_address(u8 *dest); + + #endif /* _ATH79_DEV_WMAC_H */ diff --git a/target/linux/ar71xx/patches-4.9/525-MIPS-ath79-enable-qca-usb-quirks.patch b/target/linux/ar71xx/patches-4.9/525-MIPS-ath79-enable-qca-usb-quirks.patch new file mode 100644 index 0000000000..0e33674adf --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/525-MIPS-ath79-enable-qca-usb-quirks.patch @@ -0,0 +1,101 @@ +--- a/arch/mips/ath79/dev-usb.c ++++ b/arch/mips/ath79/dev-usb.c +@@ -37,6 +37,8 @@ static struct usb_ehci_pdata ath79_ehci_ + static struct usb_ehci_pdata ath79_ehci_pdata_v2 = { + .caps_offset = 0x100, + .has_tt = 1, ++ .qca_force_host_mode = 1, ++ .qca_force_16bit_ptw = 1, + }; + + static void __init ath79_usb_register(const char *name, int id, +@@ -159,6 +161,9 @@ static void __init ar913x_usb_setup(void + ath79_device_reset_clear(AR913X_RESET_USB_PHY); + mdelay(10); + ++ ath79_ehci_pdata_v2.qca_force_host_mode = 0; ++ ath79_ehci_pdata_v2.qca_force_16bit_ptw = 0; ++ + ath79_usb_register("ehci-platform", -1, + AR913X_EHCI_BASE, AR913X_EHCI_SIZE, + ATH79_CPU_IRQ(3), +@@ -182,14 +187,34 @@ static void __init ar933x_usb_setup(void + &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); + } + +-static void __init ar934x_usb_setup(void) ++static void enable_tx_tx_idp_violation_fix(unsigned base) + { +- u32 bootstrap; ++ void __iomem *phy_reg; ++ u32 t; ++ ++ phy_reg = ioremap(base, 4); ++ if (!phy_reg) ++ return; ++ ++ t = ioread32(phy_reg); ++ t &= ~0xff; ++ t |= 0x58; ++ iowrite32(t, phy_reg); ++ ++ iounmap(phy_reg); ++} + +- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); +- if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE) ++static void ar934x_usb_reset_notifier(struct platform_device *pdev) ++{ ++ if (pdev->id != -1) + return; + ++ enable_tx_tx_idp_violation_fix(0x18116c94); ++ dev_info(&pdev->dev, "TX-TX IDP fix enabled\n"); ++} ++ ++static void __init ar934x_usb_setup(void) ++{ + ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE); + udelay(1000); + +@@ -202,14 +227,40 @@ static void __init ar934x_usb_setup(void + ath79_device_reset_clear(AR934X_RESET_USB_HOST); + udelay(1000); + ++ if (ath79_soc_rev >= 3) ++ ath79_ehci_pdata_v2.reset_notifier = ar934x_usb_reset_notifier; ++ + ath79_usb_register("ehci-platform", -1, + AR934X_EHCI_BASE, AR934X_EHCI_SIZE, + ATH79_CPU_IRQ(3), + &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); + } + ++static void qca955x_usb_reset_notifier(struct platform_device *pdev) ++{ ++ u32 base; ++ ++ switch (pdev->id) { ++ case 0: ++ base = 0x18116c94; ++ break; ++ ++ case 1: ++ base = 0x18116e54; ++ break; ++ ++ default: ++ return; ++ } ++ ++ enable_tx_tx_idp_violation_fix(base); ++ dev_info(&pdev->dev, "TX-TX IDP fix enabled\n"); ++} ++ + static void __init qca955x_usb_setup(void) + { ++ ath79_ehci_pdata_v2.reset_notifier = qca955x_usb_reset_notifier; ++ + ath79_usb_register("ehci-platform", 0, + QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE, + ATH79_IP3_IRQ(0), diff --git a/target/linux/ar71xx/patches-4.9/601-MIPS-ath79-add-more-register-defines.patch b/target/linux/ar71xx/patches-4.9/601-MIPS-ath79-add-more-register-defines.patch new file mode 100644 index 0000000000..d0f5b78901 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/601-MIPS-ath79-add-more-register-defines.patch @@ -0,0 +1,455 @@ +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -20,6 +20,10 @@ + #include <linux/bitops.h> + + #define AR71XX_APB_BASE 0x18000000 ++#define AR71XX_GE0_BASE 0x19000000 ++#define AR71XX_GE0_SIZE 0x10000 ++#define AR71XX_GE1_BASE 0x1a000000 ++#define AR71XX_GE1_SIZE 0x10000 + #define AR71XX_EHCI_BASE 0x1b000000 + #define AR71XX_EHCI_SIZE 0x1000 + #define AR71XX_OHCI_BASE 0x1c000000 +@@ -39,6 +43,8 @@ + #define AR71XX_PLL_SIZE 0x100 + #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) + #define AR71XX_RESET_SIZE 0x100 ++#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000) ++#define AR71XX_MII_SIZE 0x100 + + #define AR71XX_PCI_MEM_BASE 0x10000000 + #define AR71XX_PCI_MEM_SIZE 0x07000000 +@@ -81,15 +87,21 @@ + + #define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000) + #define AR933X_UART_SIZE 0x14 ++#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) ++#define AR933X_GMAC_SIZE 0x04 + #define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) + #define AR933X_WMAC_SIZE 0x20000 + #define AR933X_EHCI_BASE 0x1b000000 + #define AR933X_EHCI_SIZE 0x1000 + ++#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) ++#define AR934X_GMAC_SIZE 0x14 + #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) + #define AR934X_WMAC_SIZE 0x20000 + #define AR934X_EHCI_BASE 0x1b000000 + #define AR934X_EHCI_SIZE 0x200 ++#define AR934X_NFC_BASE 0x1b000200 ++#define AR934X_NFC_SIZE 0xb8 + #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000) + #define AR934X_SRIF_SIZE 0x1000 + +@@ -106,11 +118,15 @@ + #define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000) + #define QCA955X_PCI_CTRL_SIZE 0x100 + ++#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) ++#define QCA955X_GMAC_SIZE 0x40 + #define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) + #define QCA955X_WMAC_SIZE 0x20000 + #define QCA955X_EHCI0_BASE 0x1b000000 + #define QCA955X_EHCI1_BASE 0x1b400000 + #define QCA955X_EHCI_SIZE 0x1000 ++#define QCA955X_NFC_BASE 0x1b800200 ++#define QCA955X_NFC_SIZE 0xb8 + + #define AR9300_OTP_BASE 0x14000 + #define AR9300_OTP_STATUS 0x15f18 +@@ -181,6 +197,9 @@ + #define AR71XX_AHB_DIV_SHIFT 20 + #define AR71XX_AHB_DIV_MASK 0x7 + ++#define AR71XX_ETH0_PLL_SHIFT 17 ++#define AR71XX_ETH1_PLL_SHIFT 19 ++ + #define AR724X_PLL_REG_CPU_CONFIG 0x00 + #define AR724X_PLL_REG_PCIE_CONFIG 0x10 + +@@ -196,6 +215,8 @@ + #define AR724X_DDR_DIV_SHIFT 22 + #define AR724X_DDR_DIV_MASK 0x3 + ++#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c ++ + #define AR913X_PLL_REG_CPU_CONFIG 0x00 + #define AR913X_PLL_REG_ETH_CONFIG 0x04 + #define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14 +@@ -208,6 +229,9 @@ + #define AR913X_AHB_DIV_SHIFT 19 + #define AR913X_AHB_DIV_MASK 0x1 + ++#define AR913X_ETH0_PLL_SHIFT 20 ++#define AR913X_ETH1_PLL_SHIFT 22 ++ + #define AR933X_PLL_CPU_CONFIG_REG 0x00 + #define AR933X_PLL_CLOCK_CTRL_REG 0x08 + +@@ -229,6 +253,8 @@ + #define AR934X_PLL_CPU_CONFIG_REG 0x00 + #define AR934X_PLL_DDR_CONFIG_REG 0x04 + #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08 ++#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24 ++#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c + + #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 + #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f +@@ -261,9 +287,13 @@ + #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) + #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) + ++#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6) ++ + #define QCA955X_PLL_CPU_CONFIG_REG 0x00 + #define QCA955X_PLL_DDR_CONFIG_REG 0x04 + #define QCA955X_PLL_CLK_CTRL_REG 0x08 ++#define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28 ++#define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48 + + #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 + #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f +@@ -388,16 +418,83 @@ + #define AR913X_RESET_USB_HOST BIT(5) + #define AR913X_RESET_USB_PHY BIT(4) + ++#define AR933X_RESET_GE1_MDIO BIT(23) ++#define AR933X_RESET_GE0_MDIO BIT(22) ++#define AR933X_RESET_GE1_MAC BIT(13) + #define AR933X_RESET_WMAC BIT(11) ++#define AR933X_RESET_GE0_MAC BIT(9) + #define AR933X_RESET_USB_HOST BIT(5) + #define AR933X_RESET_USB_PHY BIT(4) + #define AR933X_RESET_USBSUS_OVERRIDE BIT(3) + ++#define AR934X_RESET_HOST BIT(31) ++#define AR934X_RESET_SLIC BIT(30) ++#define AR934X_RESET_HDMA BIT(29) ++#define AR934X_RESET_EXTERNAL BIT(28) ++#define AR934X_RESET_RTC BIT(27) ++#define AR934X_RESET_PCIE_EP_INT BIT(26) ++#define AR934X_RESET_CHKSUM_ACC BIT(25) ++#define AR934X_RESET_FULL_CHIP BIT(24) ++#define AR934X_RESET_GE1_MDIO BIT(23) ++#define AR934X_RESET_GE0_MDIO BIT(22) ++#define AR934X_RESET_CPU_NMI BIT(21) ++#define AR934X_RESET_CPU_COLD BIT(20) ++#define AR934X_RESET_HOST_RESET_INT BIT(19) ++#define AR934X_RESET_PCIE_EP BIT(18) ++#define AR934X_RESET_UART1 BIT(17) ++#define AR934X_RESET_DDR BIT(16) ++#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) ++#define AR934X_RESET_NANDF BIT(14) ++#define AR934X_RESET_GE1_MAC BIT(13) ++#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12) + #define AR934X_RESET_USB_PHY_ANALOG BIT(11) ++#define AR934X_RESET_HOST_DMA_INT BIT(10) ++#define AR934X_RESET_GE0_MAC BIT(9) ++#define AR934X_RESET_ETH_SWITCH BIT(8) ++#define AR934X_RESET_PCIE_PHY BIT(7) ++#define AR934X_RESET_PCIE BIT(6) + #define AR934X_RESET_USB_HOST BIT(5) + #define AR934X_RESET_USB_PHY BIT(4) + #define AR934X_RESET_USBSUS_OVERRIDE BIT(3) ++#define AR934X_RESET_LUT BIT(2) ++#define AR934X_RESET_MBOX BIT(1) ++#define AR934X_RESET_I2S BIT(0) ++ ++#define QCA955X_RESET_HOST BIT(31) ++#define QCA955X_RESET_SLIC BIT(30) ++#define QCA955X_RESET_HDMA BIT(29) ++#define QCA955X_RESET_EXTERNAL BIT(28) ++#define QCA955X_RESET_RTC BIT(27) ++#define QCA955X_RESET_PCIE_EP_INT BIT(26) ++#define QCA955X_RESET_CHKSUM_ACC BIT(25) ++#define QCA955X_RESET_FULL_CHIP BIT(24) ++#define QCA955X_RESET_GE1_MDIO BIT(23) ++#define QCA955X_RESET_GE0_MDIO BIT(22) ++#define QCA955X_RESET_CPU_NMI BIT(21) ++#define QCA955X_RESET_CPU_COLD BIT(20) ++#define QCA955X_RESET_HOST_RESET_INT BIT(19) ++#define QCA955X_RESET_PCIE_EP BIT(18) ++#define QCA955X_RESET_UART1 BIT(17) ++#define QCA955X_RESET_DDR BIT(16) ++#define QCA955X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) ++#define QCA955X_RESET_NANDF BIT(14) ++#define QCA955X_RESET_GE1_MAC BIT(13) ++#define QCA955X_RESET_SGMII_ANALOG BIT(12) ++#define QCA955X_RESET_USB_PHY_ANALOG BIT(11) ++#define QCA955X_RESET_HOST_DMA_INT BIT(10) ++#define QCA955X_RESET_GE0_MAC BIT(9) ++#define QCA955X_RESET_SGMII BIT(8) ++#define QCA955X_RESET_PCIE_PHY BIT(7) ++#define QCA955X_RESET_PCIE BIT(6) ++#define QCA955X_RESET_USB_HOST BIT(5) ++#define QCA955X_RESET_USB_PHY BIT(4) ++#define QCA955X_RESET_USBSUS_OVERRIDE BIT(3) ++#define QCA955X_RESET_LUT BIT(2) ++#define QCA955X_RESET_MBOX BIT(1) ++#define QCA955X_RESET_I2S BIT(0) + ++#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18) ++#define AR933X_BOOTSTRAP_EEPBUSY BIT(4) + #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) + + #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) +@@ -539,8 +636,22 @@ + #define AR71XX_GPIO_REG_INT_ENABLE 0x24 + #define AR71XX_GPIO_REG_FUNC 0x28 + ++#define AR934X_GPIO_REG_OUT_FUNC0 0x2c ++#define AR934X_GPIO_REG_OUT_FUNC1 0x30 ++#define AR934X_GPIO_REG_OUT_FUNC2 0x34 ++#define AR934X_GPIO_REG_OUT_FUNC3 0x38 ++#define AR934X_GPIO_REG_OUT_FUNC4 0x3c ++#define AR934X_GPIO_REG_OUT_FUNC5 0x40 + #define AR934X_GPIO_REG_FUNC 0x6c + ++#define QCA955X_GPIO_REG_OUT_FUNC0 0x2c ++#define QCA955X_GPIO_REG_OUT_FUNC1 0x30 ++#define QCA955X_GPIO_REG_OUT_FUNC2 0x34 ++#define QCA955X_GPIO_REG_OUT_FUNC3 0x38 ++#define QCA955X_GPIO_REG_OUT_FUNC4 0x3c ++#define QCA955X_GPIO_REG_OUT_FUNC5 0x40 ++#define QCA955X_GPIO_REG_FUNC 0x6c ++ + #define AR71XX_GPIO_COUNT 16 + #define AR7240_GPIO_COUNT 18 + #define AR7241_GPIO_COUNT 20 +@@ -570,4 +681,235 @@ + #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13 + #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7 + ++#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17) ++#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16) ++#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13) ++#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12) ++#define AR71XX_GPIO_FUNC_UART_EN BIT(8) ++#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4) ++#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0) ++ ++#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19) ++#define AR724X_GPIO_FUNC_SPI_EN BIT(18) ++#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14) ++#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13) ++#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12) ++#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11) ++#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10) ++#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9) ++#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) ++#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) ++#define AR724X_GPIO_FUNC_UART_EN BIT(1) ++#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0) ++ ++#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22) ++#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21) ++#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20) ++#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19) ++#define AR913X_GPIO_FUNC_I2S1_EN BIT(18) ++#define AR913X_GPIO_FUNC_I2S0_EN BIT(17) ++#define AR913X_GPIO_FUNC_SLIC_EN BIT(16) ++#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9) ++#define AR913X_GPIO_FUNC_UART_EN BIT(8) ++#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4) ++ ++#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31) ++#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30) ++#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29) ++#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27) ++#define AR933X_GPIO_FUNC_I2SO_EN BIT(26) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23) ++#define AR933X_GPIO_FUNC_SPI_EN BIT(18) ++#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14) ++#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) ++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) ++#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) ++#define AR933X_GPIO_FUNC_UART_EN BIT(1) ++#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0) ++ ++#define AR934X_GPIO_FUNC_CLK_OBS7_EN BIT(9) ++#define AR934X_GPIO_FUNC_CLK_OBS6_EN BIT(8) ++#define AR934X_GPIO_FUNC_CLK_OBS5_EN BIT(7) ++#define AR934X_GPIO_FUNC_CLK_OBS4_EN BIT(6) ++#define AR934X_GPIO_FUNC_CLK_OBS3_EN BIT(5) ++#define AR934X_GPIO_FUNC_CLK_OBS2_EN BIT(4) ++#define AR934X_GPIO_FUNC_CLK_OBS1_EN BIT(3) ++#define AR934X_GPIO_FUNC_CLK_OBS0_EN BIT(2) ++#define AR934X_GPIO_FUNC_JTAG_DISABLE BIT(1) ++ ++#define AR934X_GPIO_OUT_GPIO 0 ++#define AR934X_GPIO_OUT_SPI_CS1 7 ++#define AR934X_GPIO_OUT_LED_LINK0 41 ++#define AR934X_GPIO_OUT_LED_LINK1 42 ++#define AR934X_GPIO_OUT_LED_LINK2 43 ++#define AR934X_GPIO_OUT_LED_LINK3 44 ++#define AR934X_GPIO_OUT_LED_LINK4 45 ++#define AR934X_GPIO_OUT_EXT_LNA0 46 ++#define AR934X_GPIO_OUT_EXT_LNA1 47 ++ ++#define QCA955X_GPIO_FUNC_CLK_OBS7_EN BIT(9) ++#define QCA955X_GPIO_FUNC_CLK_OBS6_EN BIT(8) ++#define QCA955X_GPIO_FUNC_CLK_OBS5_EN BIT(7) ++#define QCA955X_GPIO_FUNC_CLK_OBS4_EN BIT(6) ++#define QCA955X_GPIO_FUNC_CLK_OBS3_EN BIT(5) ++#define QCA955X_GPIO_FUNC_CLK_OBS2_EN BIT(4) ++#define QCA955X_GPIO_FUNC_CLK_OBS1_EN BIT(3) ++#define QCA955X_GPIO_FUNC_JTAG_DISABLE BIT(1) ++ ++#define QCA955X_GPIO_OUT_GPIO 0 ++#define QCA955X_MII_EXT_MDI 1 ++#define QCA955X_SLIC_DATA_OUT 3 ++#define QCA955X_SLIC_PCM_FS 4 ++#define QCA955X_SLIC_PCM_CLK 5 ++#define QCA955X_SPI_CLK 8 ++#define QCA955X_SPI_CS_0 9 ++#define QCA955X_SPI_CS_1 10 ++#define QCA955X_SPI_CS_2 11 ++#define QCA955X_SPI_MISO 12 ++#define QCA955X_I2S_CLK 13 ++#define QCA955X_I2S_WS 14 ++#define QCA955X_I2S_SD 15 ++#define QCA955X_I2S_MCK 16 ++#define QCA955X_SPDIF_OUT 17 ++#define QCA955X_UART1_TD 18 ++#define QCA955X_UART1_RTS 19 ++#define QCA955X_UART1_RD 20 ++#define QCA955X_UART1_CTS 21 ++#define QCA955X_UART0_SOUT 22 ++#define QCA955X_SPDIF2_OUT 23 ++#define QCA955X_LED_SGMII_SPEED0 24 ++#define QCA955X_LED_SGMII_SPEED1 25 ++#define QCA955X_LED_SGMII_DUPLEX 26 ++#define QCA955X_LED_SGMII_LINK_UP 27 ++#define QCA955X_SGMII_SPEED0_INVERT 28 ++#define QCA955X_SGMII_SPEED1_INVERT 29 ++#define QCA955X_SGMII_DUPLEX_INVERT 30 ++#define QCA955X_SGMII_LINK_UP_INVERT 31 ++#define QCA955X_GE1_MII_MDO 32 ++#define QCA955X_GE1_MII_MDC 33 ++#define QCA955X_SWCOM2 38 ++#define QCA955X_SWCOM3 39 ++#define QCA955X_MAC2_GPIO 40 ++#define QCA955X_MAC3_GPIO 41 ++#define QCA955X_ATT_LED 42 ++#define QCA955X_PWR_LED 43 ++#define QCA955X_TX_FRAME 44 ++#define QCA955X_RX_CLEAR_EXTERNAL 45 ++#define QCA955X_LED_NETWORK_EN 46 ++#define QCA955X_LED_POWER_EN 47 ++#define QCA955X_WMAC_GLUE_WOW 68 ++#define QCA955X_RX_CLEAR_EXTENSION 70 ++#define QCA955X_CP_NAND_CS1 73 ++#define QCA955X_USB_SUSPEND 74 ++#define QCA955X_ETH_TX_ERR 75 ++#define QCA955X_DDR_DQ_OE 76 ++#define QCA955X_CLKREQ_N_EP 77 ++#define QCA955X_CLKREQ_N_RC 78 ++#define QCA955X_CLK_OBS0 79 ++#define QCA955X_CLK_OBS1 80 ++#define QCA955X_CLK_OBS2 81 ++#define QCA955X_CLK_OBS3 82 ++#define QCA955X_CLK_OBS4 83 ++#define QCA955X_CLK_OBS5 84 ++ ++/* ++ * MII_CTRL block ++ */ ++#define AR71XX_MII_REG_MII0_CTRL 0x00 ++#define AR71XX_MII_REG_MII1_CTRL 0x04 ++ ++#define AR71XX_MII_CTRL_IF_MASK 3 ++#define AR71XX_MII_CTRL_SPEED_SHIFT 4 ++#define AR71XX_MII_CTRL_SPEED_MASK 3 ++#define AR71XX_MII_CTRL_SPEED_10 0 ++#define AR71XX_MII_CTRL_SPEED_100 1 ++#define AR71XX_MII_CTRL_SPEED_1000 2 ++ ++#define AR71XX_MII0_CTRL_IF_GMII 0 ++#define AR71XX_MII0_CTRL_IF_MII 1 ++#define AR71XX_MII0_CTRL_IF_RGMII 2 ++#define AR71XX_MII0_CTRL_IF_RMII 3 ++ ++#define AR71XX_MII1_CTRL_IF_RGMII 0 ++#define AR71XX_MII1_CTRL_IF_RMII 1 ++ ++/* ++ * AR933X GMAC interface ++ */ ++#define AR933X_GMAC_REG_ETH_CFG 0x00 ++ ++#define AR933X_ETH_CFG_RGMII_GE0 BIT(0) ++#define AR933X_ETH_CFG_MII_GE0 BIT(1) ++#define AR933X_ETH_CFG_GMII_GE0 BIT(2) ++#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3) ++#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4) ++#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5) ++#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7) ++#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8) ++#define AR933X_ETH_CFG_RMII_GE0 BIT(9) ++#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0 ++#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10) ++ ++/* ++ * AR934X GMAC Interface ++ */ ++#define AR934X_GMAC_REG_ETH_CFG 0x00 ++ ++#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0) ++#define AR934X_ETH_CFG_MII_GMAC0 BIT(1) ++#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2) ++#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3) ++#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4) ++#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5) ++#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6) ++#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7) ++#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9) ++#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10) ++#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11) ++#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12) ++#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) ++#define AR934X_ETH_CFG_RXD_DELAY BIT(14) ++#define AR934X_ETH_CFG_RXD_DELAY_MASK 0x3 ++#define AR934X_ETH_CFG_RXD_DELAY_SHIFT 14 ++#define AR934X_ETH_CFG_RDV_DELAY BIT(16) ++#define AR934X_ETH_CFG_RDV_DELAY_MASK 0x3 ++#define AR934X_ETH_CFG_RDV_DELAY_SHIFT 16 ++ ++/* ++ * QCA955X GMAC Interface ++ */ ++ ++#define QCA955X_GMAC_REG_ETH_CFG 0x00 ++ ++#define QCA955X_ETH_CFG_RGMII_EN BIT(0) ++#define QCA955X_ETH_CFG_MII_GE0 BIT(1) ++#define QCA955X_ETH_CFG_GMII_GE0 BIT(2) ++#define QCA955X_ETH_CFG_MII_GE0_MASTER BIT(3) ++#define QCA955X_ETH_CFG_MII_GE0_SLAVE BIT(4) ++#define QCA955X_ETH_CFG_GE0_ERR_EN BIT(5) ++#define QCA955X_ETH_CFG_GE0_SGMII BIT(6) ++#define QCA955X_ETH_CFG_RMII_GE0 BIT(10) ++#define QCA955X_ETH_CFG_MII_CNTL_SPEED BIT(11) ++#define QCA955X_ETH_CFG_RMII_GE0_MASTER BIT(12) ++#define QCA955X_ETH_CFG_RXD_DELAY_MASK 0x3 ++#define QCA955X_ETH_CFG_RXD_DELAY_SHIFT 14 ++#define QCA955X_ETH_CFG_RDV_DELAY BIT(16) ++#define QCA955X_ETH_CFG_RDV_DELAY_MASK 0x3 ++#define QCA955X_ETH_CFG_RDV_DELAY_SHIFT 16 ++#define QCA955X_ETH_CFG_TXD_DELAY_MASK 0x3 ++#define QCA955X_ETH_CFG_TXD_DELAY_SHIFT 18 ++#define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3 ++#define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20 ++ + #endif /* __ASM_MACH_AR71XX_REGS_H */ diff --git a/target/linux/ar71xx/patches-4.9/602-MIPS-ath79-add-openwrt-stuff.patch b/target/linux/ar71xx/patches-4.9/602-MIPS-ath79-add-openwrt-stuff.patch new file mode 100644 index 0000000000..cbd69e337b --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/602-MIPS-ath79-add-openwrt-stuff.patch @@ -0,0 +1,49 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -98,6 +98,20 @@ config SOC_QCA955X + select PCI_AR724X if PCI + def_bool n + ++config ATH79_DEV_M25P80 ++ select ATH79_DEV_SPI ++ def_bool n ++ ++config ATH79_DEV_AP9X_PCI ++ select ATH79_PCI_ATH9K_FIXUP ++ def_bool n ++ ++config ATH79_DEV_DSA ++ def_bool n ++ ++config ATH79_DEV_ETH ++ def_bool n ++ + config PCI_AR724X + def_bool n + +@@ -107,6 +121,10 @@ config ATH79_DEV_GPIO_BUTTONS + config ATH79_DEV_LEDS_GPIO + def_bool n + ++config ATH79_DEV_NFC ++ depends on (SOC_AR934X || SOC_QCA955X) ++ def_bool n ++ + config ATH79_DEV_SPI + def_bool n + +@@ -117,4 +135,14 @@ config ATH79_DEV_WMAC + depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X) + def_bool n + ++config ATH79_NVRAM ++ def_bool n ++ ++config ATH79_PCI_ATH9K_FIXUP ++ def_bool n ++ ++config ATH79_ROUTERBOOT ++ select LZO_DECOMPRESS ++ def_bool n ++ + endif diff --git a/target/linux/ar71xx/patches-4.9/603-MIPS-ath79-ap121-fixes.patch b/target/linux/ar71xx/patches-4.9/603-MIPS-ath79-ap121-fixes.patch new file mode 100644 index 0000000000..773a858ae1 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/603-MIPS-ath79-ap121-fixes.patch @@ -0,0 +1,149 @@ +--- a/arch/mips/ath79/mach-ap121.c ++++ b/arch/mips/ath79/mach-ap121.c +@@ -1,19 +1,21 @@ + /* + * Atheros AP121 board support + * +- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +-#include "machtypes.h" ++#include "dev-eth.h" + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" ++#include "dev-m25p80.h" + #include "dev-spi.h" + #include "dev-usb.h" + #include "dev-wmac.h" ++#include "machtypes.h" + + #define AP121_GPIO_LED_WLAN 0 + #define AP121_GPIO_LED_USB 1 +@@ -24,7 +26,14 @@ + #define AP121_KEYS_POLL_INTERVAL 20 /* msecs */ + #define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL) + +-#define AP121_CAL_DATA_ADDR 0x1fff1000 ++#define AP121_MAC0_OFFSET 0x0000 ++#define AP121_MAC1_OFFSET 0x0006 ++#define AP121_CALDATA_OFFSET 0x1000 ++#define AP121_WMAC_MAC_OFFSET 0x1002 ++ ++#define AP121_MINI_GPIO_LED_WLAN 0 ++#define AP121_MINI_GPIO_BTN_JUMPSTART 12 ++#define AP121_MINI_GPIO_BTN_RESET 11 + + static struct gpio_led ap121_leds_gpio[] __initdata = { + { +@@ -58,35 +67,78 @@ static struct gpio_keys_button ap121_gpi + } + }; + +-static struct spi_board_info ap121_spi_info[] = { ++static struct gpio_led ap121_mini_leds_gpio[] __initdata = { + { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "mx25l1606e", +- } ++ .name = "ap121:green:wlan", ++ .gpio = AP121_MINI_GPIO_LED_WLAN, ++ .active_low = 0, ++ }, + }; + +-static struct ath79_spi_platform_data ap121_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, ++static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = { ++ { ++ .desc = "jumpstart button", ++ .type = EV_KEY, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AP121_MINI_GPIO_BTN_JUMPSTART, ++ .active_low = 1, ++ }, ++ { ++ .desc = "reset button", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AP121_MINI_GPIO_BTN_RESET, ++ .active_low = 1, ++ } + }; + ++static void __init ap121_common_setup(void) ++{ ++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); ++ ++ ath79_register_m25p80(NULL); ++ ath79_register_wmac(art + AP121_CALDATA_OFFSET, ++ art + AP121_WMAC_MAC_OFFSET); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0); ++ ath79_init_mac(ath79_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0); ++ ++ ath79_register_mdio(0, 0x0); ++ ++ /* LAN ports */ ++ ath79_register_eth(1); ++ ++ /* WAN port */ ++ ath79_register_eth(0); ++} ++ + static void __init ap121_setup(void) + { +- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR); ++ ap121_common_setup(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio), + ap121_leds_gpio); + ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap121_gpio_keys), + ap121_gpio_keys); +- +- ath79_register_spi(&ap121_spi_data, ap121_spi_info, +- ARRAY_SIZE(ap121_spi_info)); + ath79_register_usb(); +- ath79_register_wmac(cal_data, NULL); + } + + MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board", + ap121_setup); ++ ++static void __init ap121_mini_setup(void) ++{ ++ ap121_common_setup(); ++ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio), ++ ap121_mini_leds_gpio); ++ ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ap121_mini_gpio_keys), ++ ap121_mini_gpio_keys); ++} ++ ++MIPS_MACHINE(ATH79_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI", ++ ap121_mini_setup); +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -5,9 +5,10 @@ menu "Atheros AR71XX/AR724X/AR913X machi + config ATH79_MACH_AP121 + bool "Atheros AP121 reference board" + select SOC_AR933X ++ select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_SPI ++ select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + help diff --git a/target/linux/ar71xx/patches-4.9/605-MIPS-ath79-db120-fixes.patch b/target/linux/ar71xx/patches-4.9/605-MIPS-ath79-db120-fixes.patch new file mode 100644 index 0000000000..1029d43669 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/605-MIPS-ath79-db120-fixes.patch @@ -0,0 +1,204 @@ +--- a/arch/mips/ath79/mach-db120.c ++++ b/arch/mips/ath79/mach-db120.c +@@ -2,7 +2,7 @@ + * Atheros DB120 reference board support + * + * Copyright (c) 2011 Qualcomm Atheros +- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above +@@ -19,16 +19,26 @@ + */ + + #include <linux/pci.h> ++#include <linux/phy.h> ++#include <linux/platform_device.h> + #include <linux/ath9k_platform.h> ++#include <linux/ar8216_platform.h> + +-#include "machtypes.h" ++#include <asm/mach-ath79/ar71xx_regs.h> ++ ++#include "common.h" ++#include "dev-ap9x-pci.h" ++#include "dev-eth.h" + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" ++#include "dev-m25p80.h" ++#include "dev-nfc.h" + #include "dev-spi.h" + #include "dev-usb.h" + #include "dev-wmac.h" +-#include "pci.h" ++#include "machtypes.h" + ++#define DB120_GPIO_LED_USB 11 + #define DB120_GPIO_LED_WLAN_5G 12 + #define DB120_GPIO_LED_WLAN_2G 13 + #define DB120_GPIO_LED_STATUS 14 +@@ -39,8 +49,10 @@ + #define DB120_KEYS_POLL_INTERVAL 20 /* msecs */ + #define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL) + +-#define DB120_WMAC_CALDATA_OFFSET 0x1000 +-#define DB120_PCIE_CALDATA_OFFSET 0x5000 ++#define DB120_MAC0_OFFSET 0 ++#define DB120_MAC1_OFFSET 6 ++#define DB120_WMAC_CALDATA_OFFSET 0x1000 ++#define DB120_PCIE_CALDATA_OFFSET 0x5000 + + static struct gpio_led db120_leds_gpio[] __initdata = { + { +@@ -63,6 +75,11 @@ static struct gpio_led db120_leds_gpio[] + .gpio = DB120_GPIO_LED_WLAN_2G, + .active_low = 1, + }, ++ { ++ .name = "db120:green:usb", ++ .gpio = DB120_GPIO_LED_USB, ++ .active_low = 1, ++ } + }; + + static struct gpio_keys_button db120_gpio_keys[] __initdata = { +@@ -76,60 +93,85 @@ static struct gpio_keys_button db120_gpi + }, + }; + +-static struct spi_board_info db120_spi_info[] = { +- { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "s25sl064a", +- } ++static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = { ++ .mode = AR8327_PAD_MAC_RGMII, ++ .txclk_delay_en = true, ++ .rxclk_delay_en = true, ++ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, ++ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, + }; + +-static struct ath79_spi_platform_data db120_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, ++static struct ar8327_led_cfg db120_ar8327_led_cfg = { ++ .led_ctrl0 = 0x00000000, ++ .led_ctrl1 = 0xc737c737, ++ .led_ctrl2 = 0x00000000, ++ .led_ctrl3 = 0x00c30c00, ++ .open_drain = true, + }; + +-#ifdef CONFIG_PCI +-static struct ath9k_platform_data db120_ath9k_data; +- +-static int db120_pci_plat_dev_init(struct pci_dev *dev) +-{ +- switch (PCI_SLOT(dev->devfn)) { +- case 0: +- dev->dev.platform_data = &db120_ath9k_data; +- break; +- } +- +- return 0; +-} +- +-static void __init db120_pci_init(u8 *eeprom) +-{ +- memcpy(db120_ath9k_data.eeprom_data, eeprom, +- sizeof(db120_ath9k_data.eeprom_data)); ++static struct ar8327_platform_data db120_ar8327_data = { ++ .pad0_cfg = &db120_ar8327_pad0_cfg, ++ .port0_cfg = { ++ .force_link = 1, ++ .speed = AR8327_PORT_SPEED_1000, ++ .duplex = 1, ++ .txpause = 1, ++ .rxpause = 1, ++ }, ++ .led_cfg = &db120_ar8327_led_cfg, ++}; + +- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init); +- ath79_register_pci(); +-} +-#else +-static inline void db120_pci_init(u8 *eeprom) {} +-#endif /* CONFIG_PCI */ ++static struct mdio_board_info db120_mdio0_info[] = { ++ { ++ .bus_id = "ag71xx-mdio.0", ++ .phy_addr = 0, ++ .platform_data = &db120_ar8327_data, ++ }, ++}; + + static void __init db120_setup(void) + { + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + ++ ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO); ++ ath79_register_m25p80(NULL); ++ + ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio), + db120_leds_gpio); + ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL, + ARRAY_SIZE(db120_gpio_keys), + db120_gpio_keys); +- ath79_register_spi(&db120_spi_data, db120_spi_info, +- ARRAY_SIZE(db120_spi_info)); + ath79_register_usb(); + ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL); +- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET); ++ ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL); ++ ++ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | ++ AR934X_ETH_CFG_SW_ONLY_MODE); ++ ++ ath79_register_mdio(1, 0x0); ++ ath79_register_mdio(0, 0x0); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0); ++ ++ mdiobus_register_board_info(db120_mdio0_info, ++ ARRAY_SIZE(db120_mdio0_info)); ++ ++ /* GMAC0 is connected to an AR8327 switch */ ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ath79_eth0_data.phy_mask = BIT(0); ++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; ++ ath79_eth0_pll_data.pll_1000 = 0x06000000; ++ ath79_register_eth(0); ++ ++ /* GMAC1 is connected to the internal switch */ ++ ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0); ++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; ++ ath79_eth1_data.speed = SPEED_1000; ++ ath79_eth1_data.duplex = DUPLEX_FULL; ++ ++ ath79_register_eth(1); ++ ++ ath79_register_nfc(); + } + + MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board", +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -42,9 +42,12 @@ config ATH79_MACH_AP81 + config ATH79_MACH_DB120 + bool "Atheros DB120 reference board" + select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_SPI ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_NFC + select ATH79_DEV_USB + select ATH79_DEV_WMAC + help diff --git a/target/linux/ar71xx/patches-4.9/606-MIPS-ath79-pb44-fixes.patch b/target/linux/ar71xx/patches-4.9/606-MIPS-ath79-pb44-fixes.patch new file mode 100644 index 0000000000..f2943d0836 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/606-MIPS-ath79-pb44-fixes.patch @@ -0,0 +1,146 @@ +--- a/arch/mips/ath79/mach-pb44.c ++++ b/arch/mips/ath79/mach-pb44.c +@@ -8,23 +8,48 @@ + * by the Free Software Foundation. + */ + ++#include <linux/delay.h> + #include <linux/init.h> + #include <linux/platform_device.h> + #include <linux/i2c.h> + #include <linux/i2c-gpio.h> + #include <linux/i2c/pcf857x.h> ++#include <linux/i2c/pcf857x.h> ++#include <linux/spi/flash.h> ++#include <linux/spi/vsc7385.h> + +-#include "machtypes.h" ++#include <asm/mach-ath79/ar71xx_regs.h> ++#include <asm/mach-ath79/ath79.h> ++ ++#include "dev-eth.h" + #include "dev-gpio-buttons.h" + #include "dev-leds-gpio.h" + #include "dev-spi.h" + #include "dev-usb.h" ++#include "machtypes.h" + #include "pci.h" + + #define PB44_GPIO_I2C_SCL 0 + #define PB44_GPIO_I2C_SDA 1 + ++#define PB44_PCF8757_VSC7395_CS 0 ++#define PB44_PCF8757_STEREO_CS 1 ++#define PB44_PCF8757_SLIC_CS0 2 ++#define PB44_PCF8757_SLIC_TEST 3 ++#define PB44_PCF8757_SLIC_INT0 4 ++#define PB44_PCF8757_SLIC_INT1 5 ++#define PB44_PCF8757_SW_RESET 6 ++#define PB44_PCF8757_SW_JUMP 8 ++#define PB44_PCF8757_LED_JUMP1 9 ++#define PB44_PCF8757_LED_JUMP2 10 ++#define PB44_PCF8757_TP24 11 ++#define PB44_PCF8757_TP25 12 ++#define PB44_PCF8757_TP26 13 ++#define PB44_PCF8757_TP27 14 ++#define PB44_PCF8757_TP28 15 ++ + #define PB44_GPIO_EXP_BASE 16 ++#define PB44_GPIO_VSC7395_CS (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS) + #define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6) + #define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8) + #define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9) +@@ -87,20 +112,59 @@ static struct gpio_keys_button pb44_gpio + } + }; + ++static void pb44_vsc7395_reset(void) ++{ ++ ath79_device_reset_set(AR71XX_RESET_GE1_PHY); ++ udelay(10); ++ ath79_device_reset_clear(AR71XX_RESET_GE1_PHY); ++ mdelay(50); ++} ++ ++static struct vsc7385_platform_data pb44_vsc7395_data = { ++ .reset = pb44_vsc7395_reset, ++ .ucode_name = "vsc7395_ucode_pb44.bin", ++ .mac_cfg = { ++ .tx_ipg = 6, ++ .bit2 = 1, ++ .clk_sel = 0, ++ }, ++}; ++ ++static const char *pb44_part_probes[] = { ++ "RedBoot", ++ NULL, ++}; ++ ++static struct flash_platform_data pb44_flash_data = { ++ .part_probes = pb44_part_probes, ++}; ++ + static struct spi_board_info pb44_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p64", ++ .platform_data = &pb44_flash_data, + }, ++ { ++ .bus_num = 0, ++ .chip_select = 1, ++ .max_speed_hz = 25000000, ++ .modalias = "spi-vsc7385", ++ .platform_data = &pb44_vsc7395_data, ++ } + }; + + static struct ath79_spi_platform_data pb44_spi_data = { + .bus_num = 0, +- .num_chipselect = 1, ++ .num_chipselect = 2, + }; + ++#define PB44_WAN_PHYMASK BIT(0) ++#define PB44_LAN_PHYMASK 0 ++#define PB44_MDIO_PHYMASK (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK) ++ + static void __init pb44_init(void) + { + i2c_register_board_info(0, pb44_i2c_board_info, +@@ -116,6 +180,22 @@ static void __init pb44_init(void) + ARRAY_SIZE(pb44_spi_info)); + ath79_register_usb(); + ath79_register_pci(); ++ ++ ath79_register_mdio(0, ~PB44_MDIO_PHYMASK); ++ ++ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK; ++ ++ ath79_register_eth(0); ++ ++ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); ++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ath79_eth1_data.speed = SPEED_1000; ++ ath79_eth1_data.duplex = DUPLEX_FULL; ++ ath79_eth1_pll_data.pll_1000 = 0x110000; ++ ++ ath79_register_eth(1); + } + + MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board", +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -57,6 +57,7 @@ config ATH79_MACH_DB120 + config ATH79_MACH_PB44 + bool "Atheros PB44 reference board" + select SOC_AR71XX ++ select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_SPI diff --git a/target/linux/ar71xx/patches-4.9/607-MIPS-ath79-ubnt-xm-fixes.patch b/target/linux/ar71xx/patches-4.9/607-MIPS-ath79-ubnt-xm-fixes.patch new file mode 100644 index 0000000000..d667215a15 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/607-MIPS-ath79-ubnt-xm-fixes.patch @@ -0,0 +1,14 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -69,9 +69,10 @@ config ATH79_MACH_PB44 + config ATH79_MACH_UBNT_XM + bool "Ubiquiti Networks XM (rev 1.0) board" + select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_SPI ++ select ATH79_DEV_M25P80 + help + Say 'Y' here if you want your kernel to support the + Ubiquiti Networks XM (rev 1.0) board. diff --git a/target/linux/ar71xx/patches-4.9/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-4.9/608-MIPS-ath79-ubnt-xm-add-more-boards.patch new file mode 100644 index 0000000000..536c28d1ca --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/608-MIPS-ath79-ubnt-xm-add-more-boards.patch @@ -0,0 +1,20 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -67,12 +67,16 @@ config ATH79_MACH_PB44 + Atheros PB44 reference board. + + config ATH79_MACH_UBNT_XM +- bool "Ubiquiti Networks XM (rev 1.0) board" ++ bool "Ubiquiti Networks XM/UniFi boards" + select SOC_AR724X ++ select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC + help + Say 'Y' here if you want your kernel to support the + Ubiquiti Networks XM (rev 1.0) board. diff --git a/target/linux/ar71xx/patches-4.9/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-4.9/609-MIPS-ath79-ap136-fixes.patch new file mode 100644 index 0000000000..4d7902e166 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/609-MIPS-ath79-ap136-fixes.patch @@ -0,0 +1,300 @@ +--- a/arch/mips/ath79/mach-ap136.c ++++ b/arch/mips/ath79/mach-ap136.c +@@ -18,23 +18,29 @@ + * + */ + +-#include <linux/pci.h> +-#include <linux/ath9k_platform.h> ++#include <linux/platform_device.h> ++#include <linux/ar8216_platform.h> + +-#include "machtypes.h" ++#include <asm/mach-ath79/ar71xx_regs.h> ++ ++#include "common.h" ++#include "pci.h" ++#include "dev-ap9x-pci.h" + #include "dev-gpio-buttons.h" ++#include "dev-eth.h" + #include "dev-leds-gpio.h" +-#include "dev-spi.h" ++#include "dev-m25p80.h" ++#include "dev-nfc.h" + #include "dev-usb.h" + #include "dev-wmac.h" +-#include "pci.h" ++#include "machtypes.h" + +-#define AP136_GPIO_LED_STATUS_RED 14 +-#define AP136_GPIO_LED_STATUS_GREEN 19 + #define AP136_GPIO_LED_USB 4 +-#define AP136_GPIO_LED_WLAN_2G 13 + #define AP136_GPIO_LED_WLAN_5G 12 ++#define AP136_GPIO_LED_WLAN_2G 13 ++#define AP136_GPIO_LED_STATUS_RED 14 + #define AP136_GPIO_LED_WPS_RED 15 ++#define AP136_GPIO_LED_STATUS_GREEN 19 + #define AP136_GPIO_LED_WPS_GREEN 20 + + #define AP136_GPIO_BTN_WPS 16 +@@ -43,37 +49,39 @@ + #define AP136_KEYS_POLL_INTERVAL 20 /* msecs */ + #define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL) + +-#define AP136_WMAC_CALDATA_OFFSET 0x1000 +-#define AP136_PCIE_CALDATA_OFFSET 0x5000 ++#define AP136_MAC0_OFFSET 0 ++#define AP136_MAC1_OFFSET 6 ++#define AP136_WMAC_CALDATA_OFFSET 0x1000 ++#define AP136_PCIE_CALDATA_OFFSET 0x5000 + + static struct gpio_led ap136_leds_gpio[] __initdata = { + { +- .name = "qca:green:status", ++ .name = "ap136:green:status", + .gpio = AP136_GPIO_LED_STATUS_GREEN, + .active_low = 1, + }, + { +- .name = "qca:red:status", ++ .name = "ap136:red:status", + .gpio = AP136_GPIO_LED_STATUS_RED, + .active_low = 1, + }, + { +- .name = "qca:green:wps", ++ .name = "ap136:green:wps", + .gpio = AP136_GPIO_LED_WPS_GREEN, + .active_low = 1, + }, + { +- .name = "qca:red:wps", ++ .name = "ap136:red:wps", + .gpio = AP136_GPIO_LED_WPS_RED, + .active_low = 1, + }, + { +- .name = "qca:red:wlan-2g", ++ .name = "ap136:red:wlan-2g", + .gpio = AP136_GPIO_LED_WLAN_2G, + .active_low = 1, + }, + { +- .name = "qca:red:usb", ++ .name = "ap136:red:usb", + .gpio = AP136_GPIO_LED_USB, + .active_low = 1, + } +@@ -98,59 +106,151 @@ static struct gpio_keys_button ap136_gpi + }, + }; + +-static struct spi_board_info ap136_spi_info[] = { +- { +- .bus_num = 0, +- .chip_select = 0, +- .max_speed_hz = 25000000, +- .modalias = "mx25l6405d", +- } ++static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg; ++static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg; ++ ++static struct ar8327_platform_data ap136_ar8327_data = { ++ .pad0_cfg = &ap136_ar8327_pad0_cfg, ++ .pad6_cfg = &ap136_ar8327_pad6_cfg, ++ .port0_cfg = { ++ .force_link = 1, ++ .speed = AR8327_PORT_SPEED_1000, ++ .duplex = 1, ++ .txpause = 1, ++ .rxpause = 1, ++ }, ++ .port6_cfg = { ++ .force_link = 1, ++ .speed = AR8327_PORT_SPEED_1000, ++ .duplex = 1, ++ .txpause = 1, ++ .rxpause = 1, ++ }, + }; + +-static struct ath79_spi_platform_data ap136_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, ++static struct mdio_board_info ap136_mdio0_info[] = { ++ { ++ .bus_id = "ag71xx-mdio.0", ++ .phy_addr = 0, ++ .platform_data = &ap136_ar8327_data, ++ }, + }; + +-#ifdef CONFIG_PCI +-static struct ath9k_platform_data ap136_ath9k_data; ++static void __init ap136_common_setup(void) ++{ ++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); ++ ++ ath79_register_m25p80(NULL); ++ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), ++ ap136_leds_gpio); ++ ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ap136_gpio_keys), ++ ap136_gpio_keys); ++ ++ ath79_register_usb(); ++ ath79_register_nfc(); ++ ++ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL); ++ ++ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); + +-static int ap136_pci_plat_dev_init(struct pci_dev *dev) ++ ath79_register_mdio(0, 0x0); ++ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0); ++ ++ mdiobus_register_board_info(ap136_mdio0_info, ++ ARRAY_SIZE(ap136_mdio0_info)); ++ ++ /* GMAC0 is connected to the RMGII interface */ ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ath79_eth0_data.phy_mask = BIT(0); ++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; ++ ++ ath79_register_eth(0); ++ ++ /* GMAC1 is connected tot eh SGMII interface */ ++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; ++ ath79_eth1_data.speed = SPEED_1000; ++ ath79_eth1_data.duplex = DUPLEX_FULL; ++ ++ ath79_register_eth(1); ++} ++ ++static void __init ap136_010_setup(void) + { +- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0) +- dev->dev.platform_data = &ap136_ath9k_data; ++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + +- return 0; ++ /* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */ ++ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII; ++ ap136_ar8327_pad0_cfg.txclk_delay_en = true; ++ ap136_ar8327_pad0_cfg.rxclk_delay_en = true; ++ ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; ++ ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; ++ ++ /* GMAC6 of the AR8327 switch is connected to GMAC1 via SGMII */ ++ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII; ++ ap136_ar8327_pad6_cfg.rxclk_delay_en = true; ++ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0; ++ ++ ath79_eth0_pll_data.pll_1000 = 0xa6000000; ++ ath79_eth1_pll_data.pll_1000 = 0x03000101; ++ ++ ap136_common_setup(); ++ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL); + } + +-static void __init ap136_pci_init(u8 *eeprom) ++MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", ++ "Atheros AP136-010 reference board", ++ ap136_010_setup); ++ ++static void __init ap136_020_common_setup(void) + { +- memcpy(ap136_ath9k_data.eeprom_data, eeprom, +- sizeof(ap136_ath9k_data.eeprom_data)); ++ /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */ ++ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII; ++ ap136_ar8327_pad0_cfg.sgmii_delay_en = true; ++ ++ /* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */ ++ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII; ++ ap136_ar8327_pad6_cfg.txclk_delay_en = true; ++ ap136_ar8327_pad6_cfg.rxclk_delay_en = true; ++ ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; ++ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; + +- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init); +- ath79_register_pci(); ++ ath79_eth0_pll_data.pll_1000 = 0x56000000; ++ ath79_eth1_pll_data.pll_1000 = 0x03000101; ++ ++ ap136_common_setup(); + } +-#else +-static inline void ap136_pci_init(u8 *eeprom) {} +-#endif /* CONFIG_PCI */ + +-static void __init ap136_setup(void) ++static void __init ap136_020_setup(void) + { + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + +- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), +- ap136_leds_gpio); +- ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, +- ARRAY_SIZE(ap136_gpio_keys), +- ap136_gpio_keys); +- ath79_register_spi(&ap136_spi_data, ap136_spi_info, +- ARRAY_SIZE(ap136_spi_info)); +- ath79_register_usb(); +- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET); +- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET); ++ ap136_020_common_setup(); ++ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL); + } + +-MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", +- "Atheros AP136-010 reference board", +- ap136_setup); ++MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020", ++ "Atheros AP136-020 reference board", ++ ap136_020_setup); ++ ++/* ++ * AP135-020 is similar to AP136-020, any future AP135 specific init ++ * code can be added here. ++ */ ++static void __init ap135_020_setup(void) ++{ ++ ap136_leds_gpio[0].name = "ap135:green:status"; ++ ap136_leds_gpio[1].name = "ap135:red:status"; ++ ap136_leds_gpio[2].name = "ap135:green:wps"; ++ ap136_leds_gpio[3].name = "ap135:red:wps"; ++ ap136_leds_gpio[4].name = "ap135:red:wlan-2g"; ++ ap136_leds_gpio[5].name = "ap135:red:usb"; ++ ++ ap136_020_common_setup(); ++ ath79_register_pci(); ++} ++ ++MIPS_MACHINE(ATH79_MACH_AP135_020, "AP135-020", ++ "Atheros AP135-020 reference board", ++ ap135_020_setup); +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -16,16 +16,17 @@ config ATH79_MACH_AP121 + Atheros AP121 reference board. + + config ATH79_MACH_AP136 +- bool "Atheros AP136 reference board" ++ bool "Atheros AP136/AP135 reference board" + select SOC_QCA955X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_NFC + select ATH79_DEV_SPI + select ATH79_DEV_USB + select ATH79_DEV_WMAC + help + Say 'Y' here if you want your kernel to support the +- Atheros AP136 reference board. ++ Atheros AP136 or AP135 reference boards. + + config ATH79_MACH_AP81 + bool "Atheros AP81 reference board" diff --git a/target/linux/ar71xx/patches-4.9/611-MIPS-ath79-wdt-timeout.patch b/target/linux/ar71xx/patches-4.9/611-MIPS-ath79-wdt-timeout.patch new file mode 100644 index 0000000000..0927d5a977 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/611-MIPS-ath79-wdt-timeout.patch @@ -0,0 +1,25 @@ +MIPS: ath79: fix maximum timeout + +If the userland tries to set a timeout higher than the max_timeout, then we should fallback to max_timeout. + +Signed-off-by: John Crispin <blogic@openwrt.org> + +--- a/drivers/watchdog/ath79_wdt.c ++++ b/drivers/watchdog/ath79_wdt.c +@@ -115,10 +115,14 @@ static inline void ath79_wdt_disable(voi + + static int ath79_wdt_set_timeout(int val) + { +- if (val < 1 || val > max_timeout) ++ if (val < 1) + return -EINVAL; + +- timeout = val; ++ if (val > max_timeout) ++ timeout = max_timeout; ++ else ++ timeout = val; ++ + ath79_wdt_keepalive(); + + return 0; diff --git a/target/linux/ar71xx/patches-4.9/612-MIPS-ath79-set-buffalo-txgain.patch b/target/linux/ar71xx/patches-4.9/612-MIPS-ath79-set-buffalo-txgain.patch new file mode 100644 index 0000000000..3d100e0549 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/612-MIPS-ath79-set-buffalo-txgain.patch @@ -0,0 +1,24 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -319,6 +319,11 @@ void __init ath79_wmac_disable_5ghz(void + ath79_wmac_data.disable_5ghz = true; + } + ++void __init ath79_wmac_set_tx_gain_buffalo(void) ++{ ++ ath79_wmac_data.tx_gain_buffalo = true; ++} ++ + void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) + { + if (soc_is_ar913x()) +--- a/arch/mips/ath79/dev-wmac.h ++++ b/arch/mips/ath79/dev-wmac.h +@@ -16,6 +16,7 @@ void ath79_register_wmac(u8 *cal_data, u + void ath79_register_wmac_simple(void); + void ath79_wmac_disable_2ghz(void); + void ath79_wmac_disable_5ghz(void); ++void ath79_wmac_set_tx_gain_buffalo(void); + + bool ar93xx_wmac_read_mac_address(u8 *dest); + diff --git a/target/linux/ar71xx/patches-4.9/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch b/target/linux/ar71xx/patches-4.9/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch new file mode 100644 index 0000000000..5c1205d59f --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch @@ -0,0 +1,76 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -18,9 +18,11 @@ + #include <linux/etherdevice.h> + #include <linux/platform_device.h> + #include <linux/ath9k_platform.h> ++#include <linux/gpio.h> + + #include <asm/mach-ath79/ath79.h> + #include <asm/mach-ath79/ar71xx_regs.h> ++#include "common.h" + #include "dev-wmac.h" + + static u8 ath79_wmac_mac[ETH_ALEN]; +@@ -324,6 +326,51 @@ void __init ath79_wmac_set_tx_gain_buffa + ath79_wmac_data.tx_gain_buffalo = true; + } + ++static int ath79_request_ext_lna_gpio(unsigned chain, int gpio) ++{ ++ char *label; ++ int err; ++ ++ label = kasprintf(GFP_KERNEL, "external LNA%u", chain); ++ if (!label) ++ return -ENOMEM; ++ ++ err = gpio_request_one(gpio, GPIOF_DIR_OUT | GPIOF_INIT_LOW, label); ++ if (err) { ++ pr_err("unable to request GPIO%d for external LNA%u\n", ++ gpio, chain); ++ kfree(label); ++ } ++ ++ return err; ++} ++ ++static void ar934x_set_ext_lna_gpio(unsigned chain, int gpio) ++{ ++ unsigned int sel; ++ int err; ++ ++ if (WARN_ON(chain > 1)) ++ return; ++ ++ err = ath79_request_ext_lna_gpio(chain, gpio); ++ if (err) ++ return; ++ ++ if (chain == 0) ++ sel = AR934X_GPIO_OUT_EXT_LNA0; ++ else ++ sel = AR934X_GPIO_OUT_EXT_LNA1; ++ ++ ath79_gpio_output_select(gpio, sel); ++} ++ ++void __init ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio) ++{ ++ if (soc_is_ar934x()) ++ ar934x_set_ext_lna_gpio(chain, gpio); ++} ++ + void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) + { + if (soc_is_ar913x()) +--- a/arch/mips/ath79/dev-wmac.h ++++ b/arch/mips/ath79/dev-wmac.h +@@ -17,6 +17,7 @@ void ath79_register_wmac_simple(void); + void ath79_wmac_disable_2ghz(void); + void ath79_wmac_disable_5ghz(void); + void ath79_wmac_set_tx_gain_buffalo(void); ++void ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio); + + bool ar93xx_wmac_read_mac_address(u8 *dest); + diff --git a/target/linux/ar71xx/patches-4.9/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch b/target/linux/ar71xx/patches-4.9/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch new file mode 100644 index 0000000000..869fdd6dd0 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch @@ -0,0 +1,705 @@ +From 5300a7cd7ed2f88488ddba62947b9c6bb9663777 Mon Sep 17 00:00:00 2001 +Message-Id: <5300a7cd7ed2f88488ddba62947b9c6bb9663777.1396122227.git.mschiffer@universe-factory.net> +From: Matthias Schiffer <mschiffer@universe-factory.net> +Date: Sat, 29 Mar 2014 20:26:08 +0100 +Subject: [PATCH 1/2] MIPS: ath79: add support for QCA953x SoC + +Note that the clock calculation looks very similar to the QCA955x, but the +meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed. +--- + arch/mips/ath79/Kconfig | 6 +- + arch/mips/ath79/clock.c | 78 ++++++++++++++++++++++++++ + arch/mips/ath79/common.c | 4 ++ + arch/mips/ath79/dev-common.c | 1 + + arch/mips/ath79/dev-wmac.c | 20 +++++++ + arch/mips/ath79/early_printk.c | 1 + + arch/mips/ath79/gpio.c | 4 +- + arch/mips/ath79/irq.c | 4 ++ + arch/mips/ath79/setup.c | 8 ++- + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 48 ++++++++++++++++ + arch/mips/include/asm/mach-ath79/ath79.h | 11 ++++ + 11 files changed, 182 insertions(+), 3 deletions(-) + +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -104,6 +104,10 @@ config SOC_AR934X + select PCI_AR724X if PCI + def_bool n + ++config SOC_QCA953X ++ select USB_ARCH_HAS_EHCI ++ def_bool n ++ + config SOC_QCA955X + select HW_HAS_PCI + select PCI_AR724X if PCI +@@ -143,7 +147,7 @@ config ATH79_DEV_USB + def_bool n + + config ATH79_DEV_WMAC +- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X) ++ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X) + def_bool n + + config ATH79_NVRAM +--- a/arch/mips/ath79/clock.c ++++ b/arch/mips/ath79/clock.c +@@ -356,6 +356,91 @@ static void __init ar934x_clocks_init(vo + iounmap(dpll_base); + } + ++static void __init qca953x_clocks_init(void) ++{ ++ unsigned long ref_rate; ++ unsigned long cpu_rate; ++ unsigned long ddr_rate; ++ unsigned long ahb_rate; ++ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv; ++ u32 cpu_pll, ddr_pll; ++ u32 bootstrap; ++ ++ bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP); ++ if (bootstrap & QCA953X_BOOTSTRAP_REF_CLK_40) ++ ref_rate = 40 * 1000 * 1000; ++ else ++ ref_rate = 25 * 1000 * 1000; ++ ++ pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG); ++ out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & ++ QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK; ++ ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) & ++ QCA953X_PLL_CPU_CONFIG_REFDIV_MASK; ++ nint = (pll >> QCA953X_PLL_CPU_CONFIG_NINT_SHIFT) & ++ QCA953X_PLL_CPU_CONFIG_NINT_MASK; ++ frac = (pll >> QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT) & ++ QCA953X_PLL_CPU_CONFIG_NFRAC_MASK; ++ ++ cpu_pll = nint * ref_rate / ref_div; ++ cpu_pll += frac * (ref_rate >> 6) / ref_div; ++ cpu_pll /= (1 << out_div); ++ ++ pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG); ++ out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & ++ QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK; ++ ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) & ++ QCA953X_PLL_DDR_CONFIG_REFDIV_MASK; ++ nint = (pll >> QCA953X_PLL_DDR_CONFIG_NINT_SHIFT) & ++ QCA953X_PLL_DDR_CONFIG_NINT_MASK; ++ frac = (pll >> QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT) & ++ QCA953X_PLL_DDR_CONFIG_NFRAC_MASK; ++ ++ ddr_pll = nint * ref_rate / ref_div; ++ ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4); ++ ddr_pll /= (1 << out_div); ++ ++ clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG); ++ ++ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & ++ QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; ++ ++ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS) ++ cpu_rate = ref_rate; ++ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL) ++ cpu_rate = cpu_pll / (postdiv + 1); ++ else ++ cpu_rate = ddr_pll / (postdiv + 1); ++ ++ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) & ++ QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK; ++ ++ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS) ++ ddr_rate = ref_rate; ++ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL) ++ ddr_rate = ddr_pll / (postdiv + 1); ++ else ++ ddr_rate = cpu_pll / (postdiv + 1); ++ ++ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) & ++ QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK; ++ ++ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS) ++ ahb_rate = ref_rate; ++ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL) ++ ahb_rate = ddr_pll / (postdiv + 1); ++ else ++ ahb_rate = cpu_pll / (postdiv + 1); ++ ++ ath79_add_sys_clkdev("ref", ref_rate); ++ ath79_add_sys_clkdev("cpu", cpu_rate); ++ ath79_add_sys_clkdev("ddr", ddr_rate); ++ ath79_add_sys_clkdev("ahb", ahb_rate); ++ ++ clk_add_alias("wdt", NULL, "ref", NULL); ++ clk_add_alias("uart", NULL, "ref", NULL); ++} ++ + static void __init qca955x_clocks_init(void) + { + unsigned long ref_rate; +@@ -451,6 +536,8 @@ void __init ath79_clocks_init(void) + ar933x_clocks_init(); + else if (soc_is_ar934x()) + ar934x_clocks_init(); ++ else if (soc_is_qca953x()) ++ qca953x_clocks_init(); + else if (soc_is_qca955x()) + qca955x_clocks_init(); + else +--- a/arch/mips/ath79/common.c ++++ b/arch/mips/ath79/common.c +@@ -103,6 +103,8 @@ void ath79_device_reset_set(u32 mask) + reg = AR933X_RESET_REG_RESET_MODULE; + else if (soc_is_ar934x()) + reg = AR934X_RESET_REG_RESET_MODULE; ++ else if (soc_is_qca953x()) ++ reg = QCA953X_RESET_REG_RESET_MODULE; + else if (soc_is_qca955x()) + reg = QCA955X_RESET_REG_RESET_MODULE; + else +@@ -131,6 +133,8 @@ void ath79_device_reset_clear(u32 mask) + reg = AR933X_RESET_REG_RESET_MODULE; + else if (soc_is_ar934x()) + reg = AR934X_RESET_REG_RESET_MODULE; ++ else if (soc_is_qca953x()) ++ reg = QCA953X_RESET_REG_RESET_MODULE; + else if (soc_is_qca955x()) + reg = QCA955X_RESET_REG_RESET_MODULE; + else +--- a/arch/mips/ath79/dev-common.c ++++ b/arch/mips/ath79/dev-common.c +@@ -94,6 +94,7 @@ void __init ath79_register_uart(void) + soc_is_ar724x() || + soc_is_ar913x() || + soc_is_ar934x() || ++ soc_is_qca953x() || + soc_is_qca955x()) { + ath79_uart_data[0].uartclk = uart_clk_rate; + platform_device_register(&ath79_uart_device); +@@ -157,6 +158,9 @@ void __init ath79_gpio_init(void) + } else if (soc_is_ar934x()) { + ath79_gpio_pdata.ngpios = AR934X_GPIO_COUNT; + ath79_gpio_pdata.oe_inverted = 1; ++ } else if (soc_is_qca953x()) { ++ ath79_gpio_pdata.ngpios = QCA953X_GPIO_COUNT; ++ ath79_gpio_pdata.oe_inverted = 1; + } else if (soc_is_qca955x()) { + ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT; + ath79_gpio_pdata.oe_inverted = 1; +--- a/arch/mips/ath79/dev-usb.c ++++ b/arch/mips/ath79/dev-usb.c +@@ -236,6 +236,30 @@ static void __init ar934x_usb_setup(void + &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); + } + ++static void __init qca953x_usb_setup(void) ++{ ++ u32 bootstrap; ++ ++ bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP); ++ ++ ath79_device_reset_set(QCA953X_RESET_USBSUS_OVERRIDE); ++ udelay(1000); ++ ++ ath79_device_reset_clear(QCA953X_RESET_USB_PHY); ++ udelay(1000); ++ ++ ath79_device_reset_clear(QCA953X_RESET_USB_PHY_ANALOG); ++ udelay(1000); ++ ++ ath79_device_reset_clear(QCA953X_RESET_USB_HOST); ++ udelay(1000); ++ ++ ath79_usb_register("ehci-platform", -1, ++ QCA953X_EHCI_BASE, QCA953X_EHCI_SIZE, ++ ATH79_CPU_IRQ(3), ++ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); ++} ++ + static void qca955x_usb_reset_notifier(struct platform_device *pdev) + { + u32 base; +@@ -286,6 +310,8 @@ void __init ath79_register_usb(void) + ar933x_usb_setup(); + else if (soc_is_ar934x()) + ar934x_usb_setup(); ++ else if (soc_is_qca953x()) ++ qca953x_usb_setup(); + else if (soc_is_qca955x()) + qca955x_usb_setup(); + else +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -100,7 +100,7 @@ static int ar933x_wmac_reset(void) + return -ETIMEDOUT; + } + +-static int ar933x_r1_get_wmac_revision(void) ++static int ar93xx_get_soc_revision(void) + { + return ath79_soc_rev; + } +@@ -125,7 +125,7 @@ static void __init ar933x_wmac_setup(voi + ath79_wmac_data.is_clk_25mhz = true; + + if (ath79_soc_rev == 1) +- ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision; ++ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision; + + ath79_wmac_data.external_reset = ar933x_wmac_reset; + } +@@ -150,6 +150,26 @@ static void ar934x_wmac_setup(void) + ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision; + } + ++static void qca953x_wmac_setup(void) ++{ ++ u32 t; ++ ++ ath79_wmac_device.name = "qca953x_wmac"; ++ ++ ath79_wmac_resources[0].start = QCA953X_WMAC_BASE; ++ ath79_wmac_resources[0].end = QCA953X_WMAC_BASE + QCA953X_WMAC_SIZE - 1; ++ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1); ++ ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1); ++ ++ t = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP); ++ if (t & QCA953X_BOOTSTRAP_REF_CLK_40) ++ ath79_wmac_data.is_clk_25mhz = false; ++ else ++ ath79_wmac_data.is_clk_25mhz = true; ++ ++ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision; ++} ++ + static void qca955x_wmac_setup(void) + { + u32 t; +@@ -379,6 +399,8 @@ void __init ath79_register_wmac(u8 *cal_ + ar933x_wmac_setup(); + else if (soc_is_ar934x()) + ar934x_wmac_setup(); ++ else if (soc_is_qca953x()) ++ qca953x_wmac_setup(); + else if (soc_is_qca955x()) + qca955x_wmac_setup(); + else +--- a/arch/mips/ath79/early_printk.c ++++ b/arch/mips/ath79/early_printk.c +@@ -116,6 +116,8 @@ static void prom_putchar_init(void) + case REV_ID_MAJOR_AR9341: + case REV_ID_MAJOR_AR9342: + case REV_ID_MAJOR_AR9344: ++ case REV_ID_MAJOR_QCA9533: ++ case REV_ID_MAJOR_QCA9533_V2: + case REV_ID_MAJOR_QCA9556: + case REV_ID_MAJOR_QCA9558: + _prom_putchar = prom_putchar_ar71xx; +--- a/arch/mips/ath79/gpio.c ++++ b/arch/mips/ath79/gpio.c +@@ -31,7 +31,7 @@ static void __iomem *ath79_gpio_get_func + soc_is_ar913x() || + soc_is_ar933x()) + reg = AR71XX_GPIO_REG_FUNC; +- else if (soc_is_ar934x()) ++ else if (soc_is_ar934x() || soc_is_qca953x()) + reg = AR934X_GPIO_REG_FUNC; + else + BUG(); +@@ -64,7 +64,7 @@ void __init ath79_gpio_output_select(uns + unsigned int reg; + u32 t, s; + +- BUG_ON(!soc_is_ar934x()); ++ BUG_ON(!soc_is_ar934x() && !soc_is_qca953x()); + + if (gpio >= AR934X_GPIO_COUNT) + return; +--- a/arch/mips/ath79/irq.c ++++ b/arch/mips/ath79/irq.c +@@ -56,6 +56,34 @@ static void ar934x_ip2_irq_init(void) + irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch); + } + ++static void qca953x_ip2_irq_dispatch(struct irq_desc *desc) ++{ ++ u32 status; ++ ++ status = ath79_reset_rr(QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS); ++ ++ if (status & QCA953X_PCIE_WMAC_INT_PCIE_ALL) { ++ ath79_ddr_wb_flush(3); ++ generic_handle_irq(ATH79_IP2_IRQ(0)); ++ } else if (status & QCA953X_PCIE_WMAC_INT_WMAC_ALL) { ++ ath79_ddr_wb_flush(4); ++ generic_handle_irq(ATH79_IP2_IRQ(1)); ++ } else { ++ spurious_interrupt(); ++ } ++} ++ ++static void qca953x_irq_init(void) ++{ ++ int i; ++ ++ for (i = ATH79_IP2_IRQ_BASE; ++ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) ++ irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq); ++ ++ irq_set_chained_handler(ATH79_CPU_IRQ(2), qca953x_ip2_irq_dispatch); ++} ++ + static void qca955x_ip2_irq_dispatch(struct irq_desc *desc) + { + u32 status; +@@ -143,7 +171,7 @@ void __init arch_init_irq(void) + soc_is_ar913x() || soc_is_ar933x()) { + irq_wb_chan2 = 3; + irq_wb_chan3 = 2; +- } else if (soc_is_ar934x()) { ++ } else if (soc_is_ar934x() || soc_is_qca953x()) { + irq_wb_chan3 = 2; + } + +@@ -154,6 +182,7 @@ void __init arch_init_irq(void) + else if (soc_is_ar724x() || + soc_is_ar933x() || + soc_is_ar934x() || ++ soc_is_qca953x() || + soc_is_qca955x()) + misc_is_ar71xx = false; + else +@@ -164,6 +193,8 @@ void __init arch_init_irq(void) + + if (soc_is_ar934x()) + ar934x_ip2_irq_init(); ++ else if (soc_is_qca953x()) ++ qca953x_irq_init(); + else if (soc_is_qca955x()) + qca955x_irq_init(); + } +--- a/arch/mips/ath79/setup.c ++++ b/arch/mips/ath79/setup.c +@@ -60,6 +60,7 @@ static void __init ath79_detect_sys_type + u32 major; + u32 minor; + u32 rev = 0; ++ u32 ver = 1; + + id = ath79_reset_rr(AR71XX_RESET_REG_REV_ID); + major = id & REV_ID_MAJOR_MASK; +@@ -152,6 +153,17 @@ static void __init ath79_detect_sys_type + rev = id & AR934X_REV_ID_REVISION_MASK; + break; + ++ case REV_ID_MAJOR_QCA9533_V2: ++ ver = 2; ++ ath79_soc_rev = 2; ++ /* drop through */ ++ ++ case REV_ID_MAJOR_QCA9533: ++ ath79_soc = ATH79_SOC_QCA9533; ++ chip = "9533"; ++ rev = id & QCA953X_REV_ID_REVISION_MASK; ++ break; ++ + case REV_ID_MAJOR_QCA9556: + ath79_soc = ATH79_SOC_QCA9556; + chip = "9556"; +@@ -168,11 +180,12 @@ static void __init ath79_detect_sys_type + panic("ath79: unknown SoC, id:0x%08x", id); + } + +- ath79_soc_rev = rev; ++ if (ver == 1) ++ ath79_soc_rev = rev; + +- if (soc_is_qca955x()) +- sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u", +- chip, rev); ++ if (soc_is_qca953x() || soc_is_qca955x()) ++ sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s ver %u rev %u", ++ chip, ver, rev); + else + sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev); + pr_info("SoC: %s\n", ath79_sys_type); +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -105,6 +105,21 @@ + #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000) + #define AR934X_SRIF_SIZE 0x1000 + ++#define QCA953X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) ++#define QCA953X_GMAC_SIZE 0x14 ++#define QCA953X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) ++#define QCA953X_WMAC_SIZE 0x20000 ++#define QCA953X_EHCI_BASE 0x1b000000 ++#define QCA953X_EHCI_SIZE 0x200 ++#define QCA953X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000) ++#define QCA953X_SRIF_SIZE 0x1000 ++ ++#define QCA953X_PCI_CFG_BASE0 0x14000000 ++#define QCA953X_PCI_CTRL_BASE0 (AR71XX_APB_BASE + 0x000f0000) ++#define QCA953X_PCI_CRP_BASE0 (AR71XX_APB_BASE + 0x000c0000) ++#define QCA953X_PCI_MEM_BASE0 0x10000000 ++#define QCA953X_PCI_MEM_SIZE 0x02000000 ++ + #define QCA955X_PCI_MEM_BASE0 0x10000000 + #define QCA955X_PCI_MEM_BASE1 0x12000000 + #define QCA955X_PCI_MEM_SIZE 0x02000000 +@@ -180,6 +195,12 @@ + #define AR934X_OTP_INTF3_ADDRESS 0x3100c + #define AR934X_OTP_PGENB_SETUP_HOLD_TIME_ADDRESS 0x31034 + ++#define QCA953X_DDR_REG_FLUSH_GE0 0x9c ++#define QCA953X_DDR_REG_FLUSH_GE1 0xa0 ++#define QCA953X_DDR_REG_FLUSH_USB 0xa4 ++#define QCA953X_DDR_REG_FLUSH_PCIE 0xa8 ++#define QCA953X_DDR_REG_FLUSH_WMAC 0xac ++ + /* + * PLL block + */ +@@ -289,6 +310,44 @@ + + #define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6) + ++#define QCA953X_PLL_CPU_CONFIG_REG 0x00 ++#define QCA953X_PLL_DDR_CONFIG_REG 0x04 ++#define QCA953X_PLL_CLK_CTRL_REG 0x08 ++#define QCA953X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24 ++#define QCA953X_PLL_ETH_XMII_CONTROL_REG 0x2c ++#define QCA953X_PLL_ETH_SGMII_CONTROL_REG 0x48 ++ ++#define QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT 0 ++#define QCA953X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f ++#define QCA953X_PLL_CPU_CONFIG_NINT_SHIFT 6 ++#define QCA953X_PLL_CPU_CONFIG_NINT_MASK 0x3f ++#define QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 ++#define QCA953X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f ++#define QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 ++#define QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7 ++ ++#define QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT 0 ++#define QCA953X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff ++#define QCA953X_PLL_DDR_CONFIG_NINT_SHIFT 10 ++#define QCA953X_PLL_DDR_CONFIG_NINT_MASK 0x3f ++#define QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 ++#define QCA953X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f ++#define QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 ++#define QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 ++ ++#define QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2) ++#define QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3) ++#define QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4) ++#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5 ++#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f ++#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10 ++#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f ++#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15 ++#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f ++#define QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20) ++#define QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) ++#define QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) ++ + #define QCA955X_PLL_CPU_CONFIG_REG 0x00 + #define QCA955X_PLL_DDR_CONFIG_REG 0x04 + #define QCA955X_PLL_CLK_CTRL_REG 0x08 +@@ -365,6 +424,10 @@ + #define AR934X_RESET_REG_BOOTSTRAP 0xb0 + #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac + ++#define QCA953X_RESET_REG_RESET_MODULE 0x1c ++#define QCA953X_RESET_REG_BOOTSTRAP 0xb0 ++#define QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac ++ + #define QCA955X_RESET_REG_RESET_MODULE 0x1c + #define QCA955X_RESET_REG_BOOTSTRAP 0xb0 + #define QCA955X_RESET_REG_EXT_INT_STATUS 0xac +@@ -460,6 +523,27 @@ + #define AR934X_RESET_MBOX BIT(1) + #define AR934X_RESET_I2S BIT(0) + ++#define QCA953X_RESET_USB_EXT_PWR BIT(29) ++#define QCA953X_RESET_EXTERNAL BIT(28) ++#define QCA953X_RESET_RTC BIT(27) ++#define QCA953X_RESET_FULL_CHIP BIT(24) ++#define QCA953X_RESET_GE1_MDIO BIT(23) ++#define QCA953X_RESET_GE0_MDIO BIT(22) ++#define QCA953X_RESET_CPU_NMI BIT(21) ++#define QCA953X_RESET_CPU_COLD BIT(20) ++#define QCA953X_RESET_DDR BIT(16) ++#define QCA953X_RESET_USB_PHY_PLL_PWD_EXT BIT(15) ++#define QCA953X_RESET_GE1_MAC BIT(13) ++#define QCA953X_RESET_ETH_SWITCH_ANALOG BIT(12) ++#define QCA953X_RESET_USB_PHY_ANALOG BIT(11) ++#define QCA953X_RESET_GE0_MAC BIT(9) ++#define QCA953X_RESET_ETH_SWITCH BIT(8) ++#define QCA953X_RESET_PCIE_PHY BIT(7) ++#define QCA953X_RESET_PCIE BIT(6) ++#define QCA953X_RESET_USB_HOST BIT(5) ++#define QCA953X_RESET_USB_PHY BIT(4) ++#define QCA953X_RESET_USBSUS_OVERRIDE BIT(3) ++ + #define QCA955X_RESET_HOST BIT(31) + #define QCA955X_RESET_SLIC BIT(30) + #define QCA955X_RESET_HDMA BIT(29) +@@ -513,6 +597,13 @@ + #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1) + #define AR934X_BOOTSTRAP_DDR1 BIT(0) + ++#define QCA953X_BOOTSTRAP_SW_OPTION2 BIT(12) ++#define QCA953X_BOOTSTRAP_SW_OPTION1 BIT(11) ++#define QCA953X_BOOTSTRAP_EJTAG_MODE BIT(5) ++#define QCA953X_BOOTSTRAP_REF_CLK_40 BIT(4) ++#define QCA953X_BOOTSTRAP_SDRAM_DISABLED BIT(1) ++#define QCA953X_BOOTSTRAP_DDR1 BIT(0) ++ + #define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4) + + #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) +@@ -533,6 +624,24 @@ + AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \ + AR934X_PCIE_WMAC_INT_PCIE_RC3) + ++#define QCA953X_PCIE_WMAC_INT_WMAC_MISC BIT(0) ++#define QCA953X_PCIE_WMAC_INT_WMAC_TX BIT(1) ++#define QCA953X_PCIE_WMAC_INT_WMAC_RXLP BIT(2) ++#define QCA953X_PCIE_WMAC_INT_WMAC_RXHP BIT(3) ++#define QCA953X_PCIE_WMAC_INT_PCIE_RC BIT(4) ++#define QCA953X_PCIE_WMAC_INT_PCIE_RC0 BIT(5) ++#define QCA953X_PCIE_WMAC_INT_PCIE_RC1 BIT(6) ++#define QCA953X_PCIE_WMAC_INT_PCIE_RC2 BIT(7) ++#define QCA953X_PCIE_WMAC_INT_PCIE_RC3 BIT(8) ++#define QCA953X_PCIE_WMAC_INT_WMAC_ALL \ ++ (QCA953X_PCIE_WMAC_INT_WMAC_MISC | QCA953X_PCIE_WMAC_INT_WMAC_TX | \ ++ QCA953X_PCIE_WMAC_INT_WMAC_RXLP | QCA953X_PCIE_WMAC_INT_WMAC_RXHP) ++ ++#define QCA953X_PCIE_WMAC_INT_PCIE_ALL \ ++ (QCA953X_PCIE_WMAC_INT_PCIE_RC | QCA953X_PCIE_WMAC_INT_PCIE_RC0 | \ ++ QCA953X_PCIE_WMAC_INT_PCIE_RC1 | QCA953X_PCIE_WMAC_INT_PCIE_RC2 | \ ++ QCA953X_PCIE_WMAC_INT_PCIE_RC3) ++ + #define QCA955X_EXT_INT_WMAC_MISC BIT(0) + #define QCA955X_EXT_INT_WMAC_TX BIT(1) + #define QCA955X_EXT_INT_WMAC_RXLP BIT(2) +@@ -575,6 +684,8 @@ + #define REV_ID_MAJOR_AR9341 0x0120 + #define REV_ID_MAJOR_AR9342 0x1120 + #define REV_ID_MAJOR_AR9344 0x2120 ++#define REV_ID_MAJOR_QCA9533 0x0140 ++#define REV_ID_MAJOR_QCA9533_V2 0x0160 + #define REV_ID_MAJOR_QCA9556 0x0130 + #define REV_ID_MAJOR_QCA9558 0x1130 + +@@ -597,6 +708,8 @@ + + #define AR934X_REV_ID_REVISION_MASK 0xf + ++#define QCA953X_REV_ID_REVISION_MASK 0xf ++ + #define QCA955X_REV_ID_REVISION_MASK 0xf + + /* +@@ -644,6 +757,25 @@ + #define AR934X_GPIO_REG_OUT_FUNC5 0x40 + #define AR934X_GPIO_REG_FUNC 0x6c + ++#define QCA953X_GPIO_REG_OUT_FUNC0 0x2c ++#define QCA953X_GPIO_REG_OUT_FUNC1 0x30 ++#define QCA953X_GPIO_REG_OUT_FUNC2 0x34 ++#define QCA953X_GPIO_REG_OUT_FUNC3 0x38 ++#define QCA953X_GPIO_REG_OUT_FUNC4 0x3c ++#define QCA953X_GPIO_REG_IN_ENABLE0 0x44 ++#define QCA953X_GPIO_REG_FUNC 0x6c ++ ++#define QCA953X_GPIO_OUT_MUX_SPI_CS1 10 ++#define QCA953X_GPIO_OUT_MUX_SPI_CS2 11 ++#define QCA953X_GPIO_OUT_MUX_SPI_CS0 9 ++#define QCA953X_GPIO_OUT_MUX_SPI_CLK 8 ++#define QCA953X_GPIO_OUT_MUX_SPI_MOSI 12 ++#define QCA953X_GPIO_OUT_MUX_LED_LINK1 41 ++#define QCA953X_GPIO_OUT_MUX_LED_LINK2 42 ++#define QCA953X_GPIO_OUT_MUX_LED_LINK3 43 ++#define QCA953X_GPIO_OUT_MUX_LED_LINK4 44 ++#define QCA953X_GPIO_OUT_MUX_LED_LINK5 45 ++ + #define QCA955X_GPIO_REG_OUT_FUNC0 0x2c + #define QCA955X_GPIO_REG_OUT_FUNC1 0x30 + #define QCA955X_GPIO_REG_OUT_FUNC2 0x34 +@@ -658,6 +790,7 @@ + #define AR913X_GPIO_COUNT 22 + #define AR933X_GPIO_COUNT 30 + #define AR934X_GPIO_COUNT 23 ++#define QCA953X_GPIO_COUNT 18 + #define QCA955X_GPIO_COUNT 24 + + /* +@@ -681,6 +814,24 @@ + #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13 + #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7 + ++#define QCA953X_SRIF_CPU_DPLL1_REG 0x1c0 ++#define QCA953X_SRIF_CPU_DPLL2_REG 0x1c4 ++#define QCA953X_SRIF_CPU_DPLL3_REG 0x1c8 ++ ++#define QCA953X_SRIF_DDR_DPLL1_REG 0x240 ++#define QCA953X_SRIF_DDR_DPLL2_REG 0x244 ++#define QCA953X_SRIF_DDR_DPLL3_REG 0x248 ++ ++#define QCA953X_SRIF_DPLL1_REFDIV_SHIFT 27 ++#define QCA953X_SRIF_DPLL1_REFDIV_MASK 0x1f ++#define QCA953X_SRIF_DPLL1_NINT_SHIFT 18 ++#define QCA953X_SRIF_DPLL1_NINT_MASK 0x1ff ++#define QCA953X_SRIF_DPLL1_NFRAC_MASK 0x0003ffff ++ ++#define QCA953X_SRIF_DPLL2_LOCAL_PLL BIT(30) ++#define QCA953X_SRIF_DPLL2_OUTDIV_SHIFT 13 ++#define QCA953X_SRIF_DPLL2_OUTDIV_MASK 0x7 ++ + #define AR71XX_GPIO_FUNC_STEREO_EN BIT(17) + #define AR71XX_GPIO_FUNC_SLIC_EN BIT(16) + #define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13) +@@ -887,6 +1038,16 @@ + #define AR934X_ETH_CFG_RDV_DELAY_SHIFT 16 + + /* ++ * QCA953X GMAC Interface ++ */ ++#define QCA953X_GMAC_REG_ETH_CFG 0x00 ++ ++#define QCA953X_ETH_CFG_SW_ONLY_MODE BIT(6) ++#define QCA953X_ETH_CFG_SW_PHY_SWAP BIT(7) ++#define QCA953X_ETH_CFG_SW_APB_ACCESS BIT(9) ++#define QCA953X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) ++ ++/* + * QCA955X GMAC Interface + */ + +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -32,6 +32,7 @@ enum ath79_soc_type { + ATH79_SOC_AR9341, + ATH79_SOC_AR9342, + ATH79_SOC_AR9344, ++ ATH79_SOC_QCA9533, + ATH79_SOC_QCA9556, + ATH79_SOC_QCA9558, + }; +@@ -100,6 +101,16 @@ static inline int soc_is_ar934x(void) + return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344(); + } + ++static inline int soc_is_qca9533(void) ++{ ++ return ath79_soc == ATH79_SOC_QCA9533; ++} ++ ++static inline int soc_is_qca953x(void) ++{ ++ return soc_is_qca9533(); ++} ++ + static inline int soc_is_qca9556(void) + { + return ath79_soc == ATH79_SOC_QCA9556; diff --git a/target/linux/ar71xx/patches-4.9/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch b/target/linux/ar71xx/patches-4.9/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch new file mode 100644 index 0000000000..dafac99190 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch @@ -0,0 +1,717 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -113,6 +113,12 @@ config SOC_QCA955X + select PCI_AR724X if PCI + def_bool n + ++config SOC_QCA956X ++ select USB_ARCH_HAS_EHCI ++ select HW_HAS_PCI ++ select PCI_AR724X if PCI ++ def_bool n ++ + config ATH79_DEV_M25P80 + select ATH79_DEV_SPI + def_bool n +@@ -147,7 +153,7 @@ config ATH79_DEV_USB + def_bool n + + config ATH79_DEV_WMAC +- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X) ++ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X || SOC_QCA956X) + def_bool n + + config ATH79_NVRAM +--- a/arch/mips/ath79/clock.c ++++ b/arch/mips/ath79/clock.c +@@ -526,6 +526,100 @@ static void __init qca955x_clocks_init(v + clk_add_alias("uart", NULL, "ref", NULL); + } + ++static void __init qca956x_clocks_init(void) ++{ ++ unsigned long ref_rate; ++ unsigned long cpu_rate; ++ unsigned long ddr_rate; ++ unsigned long ahb_rate; ++ u32 pll, out_div, ref_div, nint, hfrac, lfrac, clk_ctrl, postdiv; ++ u32 cpu_pll, ddr_pll; ++ u32 bootstrap; ++ ++ bootstrap = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP); ++ if (bootstrap & QCA956X_BOOTSTRAP_REF_CLK_40) ++ ref_rate = 40 * 1000 * 1000; ++ else ++ ref_rate = 25 * 1000 * 1000; ++ ++ pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG); ++ out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & ++ QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK; ++ ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) & ++ QCA956X_PLL_CPU_CONFIG_REFDIV_MASK; ++ ++ pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG); ++ nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) & ++ QCA956X_PLL_CPU_CONFIG1_NINT_MASK; ++ hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) & ++ QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK; ++ lfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT) & ++ QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK; ++ ++ cpu_pll = nint * ref_rate / ref_div; ++ cpu_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13); ++ cpu_pll += (hfrac >> 13) * ref_rate / ref_div; ++ cpu_pll /= (1 << out_div); ++ ++ pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG); ++ out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & ++ QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK; ++ ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) & ++ QCA956X_PLL_DDR_CONFIG_REFDIV_MASK; ++ pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG); ++ nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) & ++ QCA956X_PLL_DDR_CONFIG1_NINT_MASK; ++ hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) & ++ QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK; ++ lfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT) & ++ QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK; ++ ++ ddr_pll = nint * ref_rate / ref_div; ++ ddr_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13); ++ ddr_pll += (hfrac >> 13) * ref_rate / ref_div; ++ ddr_pll /= (1 << out_div); ++ ++ clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG); ++ ++ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & ++ QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; ++ ++ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS) ++ cpu_rate = ref_rate; ++ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL) ++ cpu_rate = ddr_pll / (postdiv + 1); ++ else ++ cpu_rate = cpu_pll / (postdiv + 1); ++ ++ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) & ++ QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK; ++ ++ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS) ++ ddr_rate = ref_rate; ++ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL) ++ ddr_rate = cpu_pll / (postdiv + 1); ++ else ++ ddr_rate = ddr_pll / (postdiv + 1); ++ ++ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) & ++ QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK; ++ ++ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS) ++ ahb_rate = ref_rate; ++ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL) ++ ahb_rate = ddr_pll / (postdiv + 1); ++ else ++ ahb_rate = cpu_pll / (postdiv + 1); ++ ++ ath79_add_sys_clkdev("ref", ref_rate); ++ ath79_add_sys_clkdev("cpu", cpu_rate); ++ ath79_add_sys_clkdev("ddr", ddr_rate); ++ ath79_add_sys_clkdev("ahb", ahb_rate); ++ ++ clk_add_alias("wdt", NULL, "ref", NULL); ++ clk_add_alias("uart", NULL, "ref", NULL); ++} ++ + void __init ath79_clocks_init(void) + { + if (soc_is_ar71xx()) +@@ -540,6 +634,8 @@ void __init ath79_clocks_init(void) + qca953x_clocks_init(); + else if (soc_is_qca955x()) + qca955x_clocks_init(); ++ else if (soc_is_qca956x() || soc_is_tp9343()) ++ qca956x_clocks_init(); + else + BUG(); + } +--- a/arch/mips/ath79/common.c ++++ b/arch/mips/ath79/common.c +@@ -107,6 +107,8 @@ void ath79_device_reset_set(u32 mask) + reg = QCA953X_RESET_REG_RESET_MODULE; + else if (soc_is_qca955x()) + reg = QCA955X_RESET_REG_RESET_MODULE; ++ else if (soc_is_qca956x() || soc_is_tp9343()) ++ reg = QCA956X_RESET_REG_RESET_MODULE; + else + panic("Reset register not defined for this SOC"); + +@@ -137,6 +139,8 @@ void ath79_device_reset_clear(u32 mask) + reg = QCA953X_RESET_REG_RESET_MODULE; + else if (soc_is_qca955x()) + reg = QCA955X_RESET_REG_RESET_MODULE; ++ else if (soc_is_qca956x() || soc_is_tp9343()) ++ reg = QCA956X_RESET_REG_RESET_MODULE; + else + panic("Reset register not defined for this SOC"); + +@@ -163,6 +167,8 @@ u32 ath79_device_reset_get(u32 mask) + reg = AR933X_RESET_REG_RESET_MODULE; + else if (soc_is_ar934x()) + reg = AR934X_RESET_REG_RESET_MODULE; ++ else if (soc_is_qca956x() || soc_is_tp9343()) ++ reg = QCA956X_RESET_REG_RESET_MODULE; + else + BUG(); + +--- a/arch/mips/ath79/dev-common.c ++++ b/arch/mips/ath79/dev-common.c +@@ -95,7 +95,9 @@ void __init ath79_register_uart(void) + soc_is_ar913x() || + soc_is_ar934x() || + soc_is_qca953x() || +- soc_is_qca955x()) { ++ soc_is_qca955x() || ++ soc_is_qca956x() || ++ soc_is_tp9343()) { + ath79_uart_data[0].uartclk = uart_clk_rate; + platform_device_register(&ath79_uart_device); + } else if (soc_is_ar933x()) { +@@ -164,6 +166,9 @@ void __init ath79_gpio_init(void) + } else if (soc_is_qca955x()) { + ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT; + ath79_gpio_pdata.oe_inverted = 1; ++ } else if (soc_is_qca956x() || soc_is_tp9343()) { ++ ath79_gpio_pdata.ngpios = QCA956X_GPIO_COUNT; ++ ath79_gpio_pdata.oe_inverted = 1; + } else { + BUG(); + } +--- a/arch/mips/ath79/dev-usb.c ++++ b/arch/mips/ath79/dev-usb.c +@@ -296,6 +296,19 @@ static void __init qca955x_usb_setup(voi + &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); + } + ++static void __init qca956x_usb_setup(void) ++{ ++ ath79_usb_register("ehci-platform", 0, ++ QCA956X_EHCI0_BASE, QCA956X_EHCI_SIZE, ++ ATH79_IP3_IRQ(0), ++ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); ++ ++ ath79_usb_register("ehci-platform", 1, ++ QCA956X_EHCI1_BASE, QCA956X_EHCI_SIZE, ++ ATH79_IP3_IRQ(1), ++ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); ++} ++ + void __init ath79_register_usb(void) + { + if (soc_is_ar71xx()) +@@ -314,6 +327,8 @@ void __init ath79_register_usb(void) + qca953x_usb_setup(); + else if (soc_is_qca955x()) + qca955x_usb_setup(); ++ else if (soc_is_qca956x()) ++ qca956x_usb_setup(); + else + BUG(); + } +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -200,6 +200,26 @@ static void qca955x_wmac_setup(void) + #define AR93XX_OTP_READ_DATA \ + (soc_is_ar934x() ? AR934X_OTP_READ_DATA : AR9300_OTP_READ_DATA) + ++static void qca956x_wmac_setup(void) ++{ ++ u32 t; ++ ++ ath79_wmac_device.name = "qca956x_wmac"; ++ ++ ath79_wmac_resources[0].start = QCA956X_WMAC_BASE; ++ ath79_wmac_resources[0].end = QCA956X_WMAC_BASE + QCA956X_WMAC_SIZE - 1; ++ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1); ++ ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1); ++ ++ t = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP); ++ if (t & QCA956X_BOOTSTRAP_REF_CLK_40) ++ ath79_wmac_data.is_clk_25mhz = false; ++ else ++ ath79_wmac_data.is_clk_25mhz = true; ++ ++ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision; ++} ++ + static bool __init + ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data) + { +@@ -403,6 +423,8 @@ void __init ath79_register_wmac(u8 *cal_ + qca953x_wmac_setup(); + else if (soc_is_qca955x()) + qca955x_wmac_setup(); ++ else if (soc_is_qca956x() || soc_is_tp9343()) ++ qca956x_wmac_setup(); + else + BUG(); + +--- a/arch/mips/ath79/early_printk.c ++++ b/arch/mips/ath79/early_printk.c +@@ -120,6 +120,8 @@ static void prom_putchar_init(void) + case REV_ID_MAJOR_QCA9533_V2: + case REV_ID_MAJOR_QCA9556: + case REV_ID_MAJOR_QCA9558: ++ case REV_ID_MAJOR_TP9343: ++ case REV_ID_MAJOR_QCA956X: + _prom_putchar = prom_putchar_ar71xx; + break; + +--- a/arch/mips/ath79/gpio.c ++++ b/arch/mips/ath79/gpio.c +@@ -31,7 +31,10 @@ static void __iomem *ath79_gpio_get_func + soc_is_ar913x() || + soc_is_ar933x()) + reg = AR71XX_GPIO_REG_FUNC; +- else if (soc_is_ar934x() || soc_is_qca953x()) ++ else if (soc_is_ar934x() || ++ soc_is_qca953x() || ++ soc_is_qca956x() || ++ soc_is_tp9343()) + reg = AR934X_GPIO_REG_FUNC; + else + BUG(); +@@ -64,7 +67,7 @@ void __init ath79_gpio_output_select(uns + unsigned int reg; + u32 t, s; + +- BUG_ON(!soc_is_ar934x() && !soc_is_qca953x()); ++ BUG_ON(!soc_is_ar934x() && !soc_is_qca953x() && !soc_is_qca956x()); + + if (gpio >= AR934X_GPIO_COUNT) + return; +--- a/arch/mips/ath79/irq.c ++++ b/arch/mips/ath79/irq.c +@@ -156,6 +156,87 @@ static void qca955x_irq_init(void) + irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch); + } + ++static void qca956x_ip2_irq_dispatch(struct irq_desc *desc) ++{ ++ u32 status; ++ ++ status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS); ++ status &= QCA956X_EXT_INT_PCIE_RC1_ALL | QCA956X_EXT_INT_WMAC_ALL; ++ ++ if (status == 0) { ++ spurious_interrupt(); ++ return; ++ } ++ ++ if (status & QCA956X_EXT_INT_PCIE_RC1_ALL) { ++ /* TODO: flush DDR? */ ++ generic_handle_irq(ATH79_IP2_IRQ(0)); ++ } ++ ++ if (status & QCA956X_EXT_INT_WMAC_ALL) { ++ /* TODO: flsuh DDR? */ ++ generic_handle_irq(ATH79_IP2_IRQ(1)); ++ } ++} ++ ++static void qca956x_ip3_irq_dispatch(struct irq_desc *desc) ++{ ++ u32 status; ++ ++ status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS); ++ status &= QCA956X_EXT_INT_PCIE_RC2_ALL | ++ QCA956X_EXT_INT_USB1 | QCA956X_EXT_INT_USB2; ++ ++ if (status == 0) { ++ spurious_interrupt(); ++ return; ++ } ++ ++ if (status & QCA956X_EXT_INT_USB1) { ++ /* TODO: flush DDR? */ ++ generic_handle_irq(ATH79_IP3_IRQ(0)); ++ } ++ ++ if (status & QCA956X_EXT_INT_USB2) { ++ /* TODO: flush DDR? */ ++ generic_handle_irq(ATH79_IP3_IRQ(1)); ++ } ++ ++ if (status & QCA956X_EXT_INT_PCIE_RC2_ALL) { ++ /* TODO: flush DDR? */ ++ generic_handle_irq(ATH79_IP3_IRQ(2)); ++ } ++} ++ ++static void qca956x_enable_timer_cb(void) { ++ u32 misc; ++ ++ misc = ath79_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE); ++ misc |= MISC_INT_MIPS_SI_TIMERINT_MASK; ++ ath79_reset_wr(AR71XX_RESET_REG_MISC_INT_ENABLE, misc); ++} ++ ++static void qca956x_irq_init(void) ++{ ++ int i; ++ ++ for (i = ATH79_IP2_IRQ_BASE; ++ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) ++ irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq); ++ ++ irq_set_chained_handler(ATH79_CPU_IRQ(2), qca956x_ip2_irq_dispatch); ++ ++ for (i = ATH79_IP3_IRQ_BASE; ++ i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++) ++ irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq); ++ ++ irq_set_chained_handler(ATH79_CPU_IRQ(3), qca956x_ip3_irq_dispatch); ++ ++ /* QCA956x timer init workaround has to be applied right before setting ++ * up the clock. Else, there will be no jiffies */ ++ late_time_init = &qca956x_enable_timer_cb; ++} ++ + void __init arch_init_irq(void) + { + unsigned irq_wb_chan2 = -1; +@@ -183,7 +264,9 @@ void __init arch_init_irq(void) + soc_is_ar933x() || + soc_is_ar934x() || + soc_is_qca953x() || +- soc_is_qca955x()) ++ soc_is_qca955x() || ++ soc_is_qca956x() || ++ soc_is_tp9343()) + misc_is_ar71xx = false; + else + BUG(); +@@ -197,4 +280,6 @@ void __init arch_init_irq(void) + qca953x_irq_init(); + else if (soc_is_qca955x()) + qca955x_irq_init(); ++ else if (soc_is_qca956x() || soc_is_tp9343()) ++ qca956x_irq_init(); + } +--- a/arch/mips/ath79/pci.c ++++ b/arch/mips/ath79/pci.c +@@ -68,6 +68,21 @@ static const struct ath79_pci_irq qca955 + }, + }; + ++static const struct ath79_pci_irq qca956x_pci_irq_map[] __initconst = { ++ { ++ .bus = 0, ++ .slot = 0, ++ .pin = 1, ++ .irq = ATH79_PCI_IRQ(0), ++ }, ++ { ++ .bus = 1, ++ .slot = 0, ++ .pin = 1, ++ .irq = ATH79_PCI_IRQ(1), ++ }, ++}; ++ + int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) + { + int irq = -1; +@@ -86,6 +101,9 @@ int __init pcibios_map_irq(const struct + } else if (soc_is_qca955x()) { + ath79_pci_irq_map = qca955x_pci_irq_map; + ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map); ++ } else if (soc_is_qca956x()) { ++ ath79_pci_irq_map = qca956x_pci_irq_map; ++ ath79_pci_nr_irqs = ARRAY_SIZE(qca956x_pci_irq_map); + } else { + pr_crit("pci %s: invalid irq map\n", + pci_name((struct pci_dev *) dev)); +@@ -303,6 +321,15 @@ int __init ath79_register_pci(void) + QCA955X_PCI_MEM_SIZE, + 1, + ATH79_IP3_IRQ(2)); ++ } else if (soc_is_qca956x()) { ++ pdev = ath79_register_pci_ar724x(0, ++ QCA956X_PCI_CFG_BASE1, ++ QCA956X_PCI_CTRL_BASE1, ++ QCA956X_PCI_CRP_BASE1, ++ QCA956X_PCI_MEM_BASE1, ++ QCA956X_PCI_MEM_SIZE, ++ 1, ++ ATH79_IP3_IRQ(2)); + } else { + /* No PCI support */ + return -ENODEV; +--- a/arch/mips/ath79/setup.c ++++ b/arch/mips/ath79/setup.c +@@ -176,6 +176,18 @@ static void __init ath79_detect_sys_type + rev = id & QCA955X_REV_ID_REVISION_MASK; + break; + ++ case REV_ID_MAJOR_QCA956X: ++ ath79_soc = ATH79_SOC_QCA956X; ++ chip = "956X"; ++ rev = id & QCA956X_REV_ID_REVISION_MASK; ++ break; ++ ++ case REV_ID_MAJOR_TP9343: ++ ath79_soc = ATH79_SOC_TP9343; ++ chip = "9343"; ++ rev = id & QCA956X_REV_ID_REVISION_MASK; ++ break; ++ + default: + panic("ath79: unknown SoC, id:0x%08x", id); + } +@@ -183,9 +195,12 @@ static void __init ath79_detect_sys_type + if (ver == 1) + ath79_soc_rev = rev; + +- if (soc_is_qca953x() || soc_is_qca955x()) ++ if (soc_is_qca953x() || soc_is_qca955x() || soc_is_qca956x()) + sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s ver %u rev %u", + chip, ver, rev); ++ else if (soc_is_tp9343()) ++ sprintf(ath79_sys_type, "Qualcomm Atheros TP%s rev %u", ++ chip, rev); + else + sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev); + pr_info("SoC: %s\n", ath79_sys_type); +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -143,6 +143,23 @@ + #define QCA955X_NFC_BASE 0x1b800200 + #define QCA955X_NFC_SIZE 0xb8 + ++#define QCA956X_PCI_MEM_BASE1 0x12000000 ++#define QCA956X_PCI_MEM_SIZE 0x02000000 ++#define QCA956X_PCI_CFG_BASE1 0x16000000 ++#define QCA956X_PCI_CFG_SIZE 0x1000 ++#define QCA956X_PCI_CRP_BASE1 (AR71XX_APB_BASE + 0x00250000) ++#define QCA956X_PCI_CRP_SIZE 0x1000 ++#define QCA956X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000) ++#define QCA956X_PCI_CTRL_SIZE 0x100 ++ ++#define QCA956X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) ++#define QCA956X_WMAC_SIZE 0x20000 ++#define QCA956X_EHCI0_BASE 0x1b000000 ++#define QCA956X_EHCI1_BASE 0x1b400000 ++#define QCA956X_EHCI_SIZE 0x200 ++#define QCA956X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) ++#define QCA956X_GMAC_SIZE 0x64 ++ + #define AR9300_OTP_BASE 0x14000 + #define AR9300_OTP_STATUS 0x15f18 + #define AR9300_OTP_STATUS_TYPE 0x7 +@@ -152,6 +169,13 @@ + #define AR9300_OTP_READ_DATA 0x15f1c + + /* ++ * Hidden Registers ++ */ ++#define QCA956X_DAM_RESET_OFFSET 0xb90001bc ++#define QCA956X_DAM_RESET_SIZE 0x4 ++#define QCA956X_INLINE_CHKSUM_ENG BIT(27) ++ ++/* + * DDR_CTRL block + */ + #define AR71XX_DDR_REG_PCI_WIN0 0x7c +@@ -385,6 +409,49 @@ + #define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21) + #define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) + ++#define QCA956X_PLL_CPU_CONFIG_REG 0x00 ++#define QCA956X_PLL_CPU_CONFIG1_REG 0x04 ++#define QCA956X_PLL_DDR_CONFIG_REG 0x08 ++#define QCA956X_PLL_DDR_CONFIG1_REG 0x0c ++#define QCA956X_PLL_CLK_CTRL_REG 0x10 ++ ++#define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 ++#define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f ++#define QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19 ++#define QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7 ++ ++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT 0 ++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK 0x1f ++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT 5 ++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK 0x1fff ++#define QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT 18 ++#define QCA956X_PLL_CPU_CONFIG1_NINT_MASK 0x1ff ++ ++#define QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT 16 ++#define QCA956X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f ++#define QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23 ++#define QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7 ++ ++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT 0 ++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK 0x1f ++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT 5 ++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK 0x1fff ++#define QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT 18 ++#define QCA956X_PLL_DDR_CONFIG1_NINT_MASK 0x1ff ++ ++#define QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2) ++#define QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3) ++#define QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4) ++#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5 ++#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f ++#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10 ++#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f ++#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15 ++#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f ++#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL BIT(20) ++#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL BIT(21) ++#define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24) ++ + /* + * USB_CONFIG block + */ +@@ -432,6 +499,11 @@ + #define QCA955X_RESET_REG_BOOTSTRAP 0xb0 + #define QCA955X_RESET_REG_EXT_INT_STATUS 0xac + ++#define QCA956X_RESET_REG_RESET_MODULE 0x1c ++#define QCA956X_RESET_REG_BOOTSTRAP 0xb0 ++#define QCA956X_RESET_REG_EXT_INT_STATUS 0xac ++ ++#define MISC_INT_MIPS_SI_TIMERINT_MASK BIT(28) + #define MISC_INT_ETHSW BIT(12) + #define MISC_INT_TIMER4 BIT(10) + #define MISC_INT_TIMER3 BIT(9) +@@ -606,6 +678,8 @@ + + #define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4) + ++#define QCA956X_BOOTSTRAP_REF_CLK_40 BIT(2) ++ + #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) + #define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1) + #define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2) +@@ -673,6 +747,37 @@ + QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \ + QCA955X_EXT_INT_PCIE_RC2_INT3) + ++#define QCA956X_EXT_INT_WMAC_MISC BIT(0) ++#define QCA956X_EXT_INT_WMAC_TX BIT(1) ++#define QCA956X_EXT_INT_WMAC_RXLP BIT(2) ++#define QCA956X_EXT_INT_WMAC_RXHP BIT(3) ++#define QCA956X_EXT_INT_PCIE_RC1 BIT(4) ++#define QCA956X_EXT_INT_PCIE_RC1_INT0 BIT(5) ++#define QCA956X_EXT_INT_PCIE_RC1_INT1 BIT(6) ++#define QCA956X_EXT_INT_PCIE_RC1_INT2 BIT(7) ++#define QCA956X_EXT_INT_PCIE_RC1_INT3 BIT(8) ++#define QCA956X_EXT_INT_PCIE_RC2 BIT(12) ++#define QCA956X_EXT_INT_PCIE_RC2_INT0 BIT(13) ++#define QCA956X_EXT_INT_PCIE_RC2_INT1 BIT(14) ++#define QCA956X_EXT_INT_PCIE_RC2_INT2 BIT(15) ++#define QCA956X_EXT_INT_PCIE_RC2_INT3 BIT(16) ++#define QCA956X_EXT_INT_USB1 BIT(24) ++#define QCA956X_EXT_INT_USB2 BIT(28) ++ ++#define QCA956X_EXT_INT_WMAC_ALL \ ++ (QCA956X_EXT_INT_WMAC_MISC | QCA956X_EXT_INT_WMAC_TX | \ ++ QCA956X_EXT_INT_WMAC_RXLP | QCA956X_EXT_INT_WMAC_RXHP) ++ ++#define QCA956X_EXT_INT_PCIE_RC1_ALL \ ++ (QCA956X_EXT_INT_PCIE_RC1 | QCA956X_EXT_INT_PCIE_RC1_INT0 | \ ++ QCA956X_EXT_INT_PCIE_RC1_INT1 | QCA956X_EXT_INT_PCIE_RC1_INT2 | \ ++ QCA956X_EXT_INT_PCIE_RC1_INT3) ++ ++#define QCA956X_EXT_INT_PCIE_RC2_ALL \ ++ (QCA956X_EXT_INT_PCIE_RC2 | QCA956X_EXT_INT_PCIE_RC2_INT0 | \ ++ QCA956X_EXT_INT_PCIE_RC2_INT1 | QCA956X_EXT_INT_PCIE_RC2_INT2 | \ ++ QCA956X_EXT_INT_PCIE_RC2_INT3) ++ + #define REV_ID_MAJOR_MASK 0xfff0 + #define REV_ID_MAJOR_AR71XX 0x00a0 + #define REV_ID_MAJOR_AR913X 0x00b0 +@@ -688,6 +793,8 @@ + #define REV_ID_MAJOR_QCA9533_V2 0x0160 + #define REV_ID_MAJOR_QCA9556 0x0130 + #define REV_ID_MAJOR_QCA9558 0x1130 ++#define REV_ID_MAJOR_TP9343 0x0150 ++#define REV_ID_MAJOR_QCA956X 0x1150 + + #define AR71XX_REV_ID_MINOR_MASK 0x3 + #define AR71XX_REV_ID_MINOR_AR7130 0x0 +@@ -712,6 +819,8 @@ + + #define QCA955X_REV_ID_REVISION_MASK 0xf + ++#define QCA956X_REV_ID_REVISION_MASK 0xf ++ + /* + * SPI block + */ +@@ -784,6 +893,19 @@ + #define QCA955X_GPIO_REG_OUT_FUNC5 0x40 + #define QCA955X_GPIO_REG_FUNC 0x6c + ++#define QCA956X_GPIO_REG_OUT_FUNC0 0x2c ++#define QCA956X_GPIO_REG_OUT_FUNC1 0x30 ++#define QCA956X_GPIO_REG_OUT_FUNC2 0x34 ++#define QCA956X_GPIO_REG_OUT_FUNC3 0x38 ++#define QCA956X_GPIO_REG_OUT_FUNC4 0x3c ++#define QCA956X_GPIO_REG_OUT_FUNC5 0x40 ++#define QCA956X_GPIO_REG_IN_ENABLE0 0x44 ++#define QCA956X_GPIO_REG_IN_ENABLE3 0x50 ++#define QCA956X_GPIO_REG_FUNC 0x6c ++ ++#define QCA956X_GPIO_OUT_MUX_GE0_MDO 32 ++#define QCA956X_GPIO_OUT_MUX_GE0_MDC 33 ++ + #define AR71XX_GPIO_COUNT 16 + #define AR7240_GPIO_COUNT 18 + #define AR7241_GPIO_COUNT 20 +@@ -792,6 +914,7 @@ + #define AR934X_GPIO_COUNT 23 + #define QCA953X_GPIO_COUNT 18 + #define QCA955X_GPIO_COUNT 24 ++#define QCA956X_GPIO_COUNT 23 + + /* + * SRIF block +--- a/arch/mips/include/asm/mach-ath79/ath79.h ++++ b/arch/mips/include/asm/mach-ath79/ath79.h +@@ -35,6 +35,8 @@ enum ath79_soc_type { + ATH79_SOC_QCA9533, + ATH79_SOC_QCA9556, + ATH79_SOC_QCA9558, ++ ATH79_SOC_TP9343, ++ ATH79_SOC_QCA956X, + }; + + extern enum ath79_soc_type ath79_soc; +@@ -126,6 +128,26 @@ static inline int soc_is_qca955x(void) + return soc_is_qca9556() || soc_is_qca9558(); + } + ++static inline int soc_is_tp9343(void) ++{ ++ return ath79_soc == ATH79_SOC_TP9343; ++} ++ ++static inline int soc_is_qca9561(void) ++{ ++ return ath79_soc == ATH79_SOC_QCA956X; ++} ++ ++static inline int soc_is_qca9563(void) ++{ ++ return ath79_soc == ATH79_SOC_QCA956X; ++} ++ ++static inline int soc_is_qca956x(void) ++{ ++ return soc_is_qca9561() || soc_is_qca9563(); ++} ++ + void ath79_ddr_wb_flush(unsigned int reg); + void ath79_ddr_set_pci_windows(void); + diff --git a/target/linux/ar71xx/patches-4.9/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch b/target/linux/ar71xx/patches-4.9/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch new file mode 100644 index 0000000000..cab2f6f9cb --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch @@ -0,0 +1,38 @@ +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -157,6 +157,10 @@ + #define QCA956X_EHCI0_BASE 0x1b000000 + #define QCA956X_EHCI1_BASE 0x1b400000 + #define QCA956X_EHCI_SIZE 0x200 ++#define QCA956X_GMAC_SGMII_BASE (AR71XX_APB_BASE + 0x00070000) ++#define QCA956X_GMAC_SGMII_SIZE 0x64 ++#define QCA956X_PLL_BASE (AR71XX_APB_BASE + 0x00050000) ++#define QCA956X_PLL_SIZE 0x50 + #define QCA956X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000) + #define QCA956X_GMAC_SIZE 0x64 + +@@ -414,6 +418,7 @@ + #define QCA956X_PLL_DDR_CONFIG_REG 0x08 + #define QCA956X_PLL_DDR_CONFIG1_REG 0x0c + #define QCA956X_PLL_CLK_CTRL_REG 0x10 ++#define QCA956X_PLL_ETH_XMII_CONTROL_REG 0x30 + + #define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 + #define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f +@@ -1196,4 +1201,16 @@ + #define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3 + #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20 + ++/* ++ * QCA956X GMAC Interface ++ */ ++ ++#define QCA956X_GMAC_REG_ETH_CFG 0x00 ++ ++#define QCA956X_ETH_CFG_SW_ONLY_MODE BIT(7) ++#define QCA956X_ETH_CFG_SW_PHY_SWAP BIT(8) ++#define QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(9) ++#define QCA956X_ETH_CFG_SW_APB_ACCESS BIT(10) ++#define QCA956X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13) ++ + #endif /* __ASM_MACH_AR71XX_REGS_H */ diff --git a/target/linux/ar71xx/patches-4.9/630-MIPS-ath79-fix-chained-irq-disable.patch b/target/linux/ar71xx/patches-4.9/630-MIPS-ath79-fix-chained-irq-disable.patch new file mode 100644 index 0000000000..2b92b88d03 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/630-MIPS-ath79-fix-chained-irq-disable.patch @@ -0,0 +1,106 @@ +--- a/arch/mips/ath79/irq.c ++++ b/arch/mips/ath79/irq.c +@@ -27,6 +27,9 @@ + #include "machtypes.h" + + ++static struct irq_chip ip2_chip; ++static struct irq_chip ip3_chip; ++ + static void ar934x_ip2_irq_dispatch(struct irq_desc *desc) + { + u32 status; +@@ -50,8 +53,7 @@ static void ar934x_ip2_irq_init(void) + + for (i = ATH79_IP2_IRQ_BASE; + i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) +- irq_set_chip_and_handler(i, &dummy_irq_chip, +- handle_level_irq); ++ irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq); + + irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch); + } +@@ -79,7 +81,7 @@ static void qca953x_irq_init(void) + + for (i = ATH79_IP2_IRQ_BASE; + i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) +- irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq); ++ irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq); + + irq_set_chained_handler(ATH79_CPU_IRQ(2), qca953x_ip2_irq_dispatch); + } +@@ -143,15 +145,13 @@ static void qca955x_irq_init(void) + + for (i = ATH79_IP2_IRQ_BASE; + i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) +- irq_set_chip_and_handler(i, &dummy_irq_chip, +- handle_level_irq); ++ irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq); + + irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch); + + for (i = ATH79_IP3_IRQ_BASE; + i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++) +- irq_set_chip_and_handler(i, &dummy_irq_chip, +- handle_level_irq); ++ irq_set_chip_and_handler(i, &ip3_chip, handle_level_irq); + + irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch); + } +@@ -222,13 +222,13 @@ static void qca956x_irq_init(void) + + for (i = ATH79_IP2_IRQ_BASE; + i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) +- irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq); ++ irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq); + + irq_set_chained_handler(ATH79_CPU_IRQ(2), qca956x_ip2_irq_dispatch); + + for (i = ATH79_IP3_IRQ_BASE; + i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++) +- irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq); ++ irq_set_chip_and_handler(i, &ip3_chip, handle_level_irq); + + irq_set_chained_handler(ATH79_CPU_IRQ(3), qca956x_ip3_irq_dispatch); + +@@ -237,12 +237,40 @@ static void qca956x_irq_init(void) + late_time_init = &qca956x_enable_timer_cb; + } + ++static void ath79_ip2_disable(struct irq_data *data) ++{ ++ disable_irq(ATH79_CPU_IRQ(2)); ++} ++ ++static void ath79_ip2_enable(struct irq_data *data) ++{ ++ enable_irq(ATH79_CPU_IRQ(2)); ++} ++ ++static void ath79_ip3_disable(struct irq_data *data) ++{ ++ disable_irq(ATH79_CPU_IRQ(3)); ++} ++ ++static void ath79_ip3_enable(struct irq_data *data) ++{ ++ enable_irq(ATH79_CPU_IRQ(3)); ++} ++ + void __init arch_init_irq(void) + { + unsigned irq_wb_chan2 = -1; + unsigned irq_wb_chan3 = -1; + bool misc_is_ar71xx; + ++ ip2_chip = dummy_irq_chip; ++ ip2_chip.irq_disable = ath79_ip2_disable; ++ ip2_chip.irq_enable = ath79_ip2_enable; ++ ++ ip3_chip = dummy_irq_chip; ++ ip3_chip.irq_disable = ath79_ip3_disable; ++ ip3_chip.irq_enable = ath79_ip3_enable; ++ + if (mips_machtype == ATH79_MACH_GENERIC_OF) { + irqchip_init(); + return; diff --git a/target/linux/ar71xx/patches-4.9/631-MIPS-ath79-wmac-enable-set-led-pin.patch b/target/linux/ar71xx/patches-4.9/631-MIPS-ath79-wmac-enable-set-led-pin.patch new file mode 100644 index 0000000000..29f7f3d0a2 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/631-MIPS-ath79-wmac-enable-set-led-pin.patch @@ -0,0 +1,24 @@ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -411,6 +411,11 @@ void __init ath79_wmac_set_ext_lna_gpio( + ar934x_set_ext_lna_gpio(chain, gpio); + } + ++void __init ath79_wmac_set_led_pin(int gpio) ++{ ++ ath79_wmac_data.led_pin = gpio; ++} ++ + void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr) + { + if (soc_is_ar913x()) +--- a/arch/mips/ath79/dev-wmac.h ++++ b/arch/mips/ath79/dev-wmac.h +@@ -18,6 +18,7 @@ void ath79_wmac_disable_2ghz(void); + void ath79_wmac_disable_5ghz(void); + void ath79_wmac_set_tx_gain_buffalo(void); + void ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio); ++void ath79_wmac_set_led_pin(int gpio); + + bool ar93xx_wmac_read_mac_address(u8 *dest); + diff --git a/target/linux/ar71xx/patches-4.9/632-MIPS-ath79-gpio-enable-set-direction.patch b/target/linux/ar71xx/patches-4.9/632-MIPS-ath79-gpio-enable-set-direction.patch new file mode 100644 index 0000000000..4cf36325e1 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/632-MIPS-ath79-gpio-enable-set-direction.patch @@ -0,0 +1,32 @@ +--- a/arch/mips/ath79/common.h ++++ b/arch/mips/ath79/common.h +@@ -28,6 +28,7 @@ void ath79_gpio_function_enable(u32 mask + void ath79_gpio_function_disable(u32 mask); + void ath79_gpio_function_setup(u32 set, u32 clear); + void ath79_gpio_output_select(unsigned gpio, u8 val); ++int ath79_gpio_direction_select(unsigned gpio, bool oe); + void ath79_gpio_init(void); + + #endif /* __ATH79_COMMON_H */ +--- a/arch/mips/ath79/gpio.c ++++ b/arch/mips/ath79/gpio.c +@@ -83,3 +83,19 @@ void __init ath79_gpio_output_select(uns + /* flush write */ + (void) __raw_readl(base + reg); + } ++ ++int ath79_gpio_direction_select(unsigned gpio, bool oe) ++{ ++ void __iomem *base = ath79_gpio_base; ++ bool ieq_1 = (soc_is_ar934x() || ++ soc_is_qca953x()); ++ ++ if ((ieq_1 && oe) || (!ieq_1 && !oe)) ++ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << gpio), ++ base + AR71XX_GPIO_REG_OE); ++ else ++ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) | (1 << gpio), ++ base + AR71XX_GPIO_REG_OE); ++ ++ return 0; ++} diff --git a/target/linux/ar71xx/patches-4.9/640-MIPS-ath79-add-QCA955x-wmac-reset.patch b/target/linux/ar71xx/patches-4.9/640-MIPS-ath79-add-QCA955x-wmac-reset.patch new file mode 100644 index 0000000000..d7f4536ba3 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/640-MIPS-ath79-add-QCA955x-wmac-reset.patch @@ -0,0 +1,82 @@ +--- a/arch/mips/ath79/common.c ++++ b/arch/mips/ath79/common.c +@@ -38,7 +38,7 @@ unsigned int ath79_soc_rev; + void __iomem *ath79_pll_base; + void __iomem *ath79_reset_base; + EXPORT_SYMBOL_GPL(ath79_reset_base); +-static void __iomem *ath79_ddr_base; ++void __iomem *ath79_ddr_base; + static void __iomem *ath79_ddr_wb_flush_base; + static void __iomem *ath79_ddr_pci_win_base; + +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -32,7 +32,7 @@ + #define AR71XX_SPI_SIZE 0x01000000 + + #define AR71XX_DDR_CTRL_BASE (AR71XX_APB_BASE + 0x00000000) +-#define AR71XX_DDR_CTRL_SIZE 0x100 ++#define AR71XX_DDR_CTRL_SIZE 0x200 + #define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000) + #define AR71XX_UART_SIZE 0x100 + #define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) +@@ -229,6 +229,9 @@ + #define QCA953X_DDR_REG_FLUSH_PCIE 0xa8 + #define QCA953X_DDR_REG_FLUSH_WMAC 0xac + ++#define QCA955X_DDR_CTL_CONFIG 0x108 ++#define QCA955X_DDR_CTL_CONFIG_ACT_WMAC BIT(23) ++ + /* + * PLL block + */ +--- a/arch/mips/ath79/dev-wmac.c ++++ b/arch/mips/ath79/dev-wmac.c +@@ -170,6 +170,27 @@ static void qca953x_wmac_setup(void) + ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision; + } + ++static int ar955x_wmac_reset(void) ++{ ++ int i; ++ ++ /* Try to wait for WMAC DDR activity to stop */ ++ for (i = 0; i < 10; i++) { ++ if (!(__raw_readl(ath79_ddr_base + QCA955X_DDR_CTL_CONFIG) & ++ QCA955X_DDR_CTL_CONFIG_ACT_WMAC)) ++ break; ++ ++ udelay(10); ++ } ++ ++ ath79_device_reset_set(QCA955X_RESET_RTC); ++ udelay(10); ++ ath79_device_reset_clear(QCA955X_RESET_RTC); ++ udelay(10); ++ ++ return 0; ++} ++ + static void qca955x_wmac_setup(void) + { + u32 t; +@@ -186,6 +207,8 @@ static void qca955x_wmac_setup(void) + ath79_wmac_data.is_clk_25mhz = false; + else + ath79_wmac_data.is_clk_25mhz = true; ++ ++ ath79_wmac_data.external_reset = ar955x_wmac_reset; + } + + #define AR93XX_WMAC_SIZE \ +--- a/arch/mips/ath79/common.h ++++ b/arch/mips/ath79/common.h +@@ -19,6 +19,8 @@ + #define ATH79_MEM_SIZE_MIN (2 * 1024 * 1024) + #define ATH79_MEM_SIZE_MAX (256 * 1024 * 1024) + ++extern void __iomem *ath79_ddr_base; ++ + void ath79_clocks_init(void); + unsigned long ath79_get_sys_clk_rate(const char *id); + diff --git a/target/linux/ar71xx/patches-4.9/700-MIPS-ath79-add-openwrt-Kconfig.patch b/target/linux/ar71xx/patches-4.9/700-MIPS-ath79-add-openwrt-Kconfig.patch new file mode 100644 index 0000000000..5d4b180003 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/700-MIPS-ath79-add-openwrt-Kconfig.patch @@ -0,0 +1,11 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -82,6 +82,8 @@ config ATH79_MACH_UBNT_XM + Say 'Y' here if you want your kernel to support the + Ubiquiti Networks XM (rev 1.0) board. + ++source "arch/mips/ath79/Kconfig.openwrt" ++ + endmenu + + config SOC_AR71XX diff --git a/target/linux/ar71xx/patches-4.9/701-MIPS-ath79-add-routerboard-detection.patch b/target/linux/ar71xx/patches-4.9/701-MIPS-ath79-add-routerboard-detection.patch new file mode 100644 index 0000000000..cd91ac3c02 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/701-MIPS-ath79-add-routerboard-detection.patch @@ -0,0 +1,30 @@ +--- a/arch/mips/ath79/prom.c ++++ b/arch/mips/ath79/prom.c +@@ -136,6 +136,27 @@ void __init prom_init(void) + initrd_end = initrd_start + fw_getenvl("initrd_size"); + } + #endif ++ ++ if (strstr(arcs_cmdline, "board=750Gr3") || ++ strstr(arcs_cmdline, "board=750i") || ++ strstr(arcs_cmdline, "board=750-hb") || ++ strstr(arcs_cmdline, "board=411") || ++ strstr(arcs_cmdline, "board=433") || ++ strstr(arcs_cmdline, "board=435") || ++ strstr(arcs_cmdline, "board=450") || ++ strstr(arcs_cmdline, "board=493") || ++ strstr(arcs_cmdline, "board=951G") || ++ strstr(arcs_cmdline, "board=H951L") || ++ strstr(arcs_cmdline, "board=952-hb") || ++ strstr(arcs_cmdline, "board=953gs") || ++ strstr(arcs_cmdline, "board=962") || ++ strstr(arcs_cmdline, "board=lhg") || ++ strstr(arcs_cmdline, "board=map-hb") || ++ strstr(arcs_cmdline, "board=2011L") || ++ strstr(arcs_cmdline, "board=2011r") || ++ strstr(arcs_cmdline, "board=711Gr100") || ++ strstr(arcs_cmdline, "board=922gs")) ++ ath79_prom_append_cmdline("console", "ttyS0,115200"); + } + + void __init prom_free_prom_memory(void) diff --git a/target/linux/ar71xx/patches-4.9/739-MIPS-ath79-add-gpio-func-register-for-QCA955x-SoC.patch b/target/linux/ar71xx/patches-4.9/739-MIPS-ath79-add-gpio-func-register-for-QCA955x-SoC.patch new file mode 100644 index 0000000000..a65f7d993f --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/739-MIPS-ath79-add-gpio-func-register-for-QCA955x-SoC.patch @@ -0,0 +1,38 @@ +--- a/arch/mips/ath79/gpio.c ++++ b/arch/mips/ath79/gpio.c +@@ -33,6 +33,7 @@ static void __iomem *ath79_gpio_get_func + reg = AR71XX_GPIO_REG_FUNC; + else if (soc_is_ar934x() || + soc_is_qca953x() || ++ soc_is_qca955x() || + soc_is_qca956x() || + soc_is_tp9343()) + reg = AR934X_GPIO_REG_FUNC; +@@ -64,15 +65,21 @@ void ath79_gpio_function_disable(u32 mas + void __init ath79_gpio_output_select(unsigned gpio, u8 val) + { + void __iomem *base = ath79_gpio_base; +- unsigned int reg; ++ unsigned int reg, reg_base; + u32 t, s; + +- BUG_ON(!soc_is_ar934x() && !soc_is_qca953x() && !soc_is_qca956x()); +- +- if (gpio >= AR934X_GPIO_COUNT) +- return; ++ if (soc_is_ar934x()) ++ reg_base = AR934X_GPIO_REG_OUT_FUNC0; ++ else if (soc_is_qca953x()) ++ reg_base = QCA953X_GPIO_REG_OUT_FUNC0; ++ else if (soc_is_qca955x()) ++ reg_base = QCA955X_GPIO_REG_OUT_FUNC0; ++ else if (soc_is_qca956x()) ++ reg_base = QCA956X_GPIO_REG_OUT_FUNC0; ++ else ++ BUG(); + +- reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4); ++ reg = reg_base + 4 * (gpio / 4); + s = 8 * (gpio % 4); + + t = __raw_readl(base + reg); diff --git a/target/linux/ar71xx/patches-4.9/740-MIPS-ath79-add-PCI-for-QCA953x-SoC.patch b/target/linux/ar71xx/patches-4.9/740-MIPS-ath79-add-PCI-for-QCA953x-SoC.patch new file mode 100644 index 0000000000..a57351efde --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/740-MIPS-ath79-add-PCI-for-QCA953x-SoC.patch @@ -0,0 +1,44 @@ +--- a/arch/mips/ath79/pci.c ++++ b/arch/mips/ath79/pci.c +@@ -53,6 +53,15 @@ static const struct ath79_pci_irq ar724x + } + }; + ++static const struct ath79_pci_irq qca953x_pci_irq_map[] __initconst = { ++ { ++ .bus = 0, ++ .slot = 0, ++ .pin = 1, ++ .irq = ATH79_PCI_IRQ(0), ++ }, ++}; ++ + static const struct ath79_pci_irq qca955x_pci_irq_map[] __initconst = { + { + .bus = 0, +@@ -98,6 +107,9 @@ int __init pcibios_map_irq(const struct + soc_is_ar9344()) { + ath79_pci_irq_map = ar724x_pci_irq_map; + ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map); ++ } else if (soc_is_qca953x()) { ++ ath79_pci_irq_map = qca953x_pci_irq_map; ++ ath79_pci_nr_irqs = ARRAY_SIZE(qca953x_pci_irq_map); + } else if (soc_is_qca955x()) { + ath79_pci_irq_map = qca955x_pci_irq_map; + ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map); +@@ -303,6 +315,15 @@ int __init ath79_register_pci(void) + AR724X_PCI_MEM_SIZE, + 0, + ATH79_IP2_IRQ(0)); ++ } else if (soc_is_qca9533()) { ++ pdev = ath79_register_pci_ar724x(0, ++ QCA953X_PCI_CFG_BASE0, ++ QCA953X_PCI_CTRL_BASE0, ++ QCA953X_PCI_CRP_BASE0, ++ QCA953X_PCI_MEM_BASE0, ++ QCA953X_PCI_MEM_SIZE, ++ 0, ++ ATH79_IP2_IRQ(0)); + } else if (soc_is_qca9558()) { + pdev = ath79_register_pci_ar724x(0, + QCA955X_PCI_CFG_BASE0, diff --git a/target/linux/ar71xx/patches-4.9/818-MIPS-ath79-add-nu801-led-driver.patch b/target/linux/ar71xx/patches-4.9/818-MIPS-ath79-add-nu801-led-driver.patch new file mode 100644 index 0000000000..337447e2bf --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/818-MIPS-ath79-add-nu801-led-driver.patch @@ -0,0 +1,26 @@ +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -606,6 +606,13 @@ config LEDS_IS31FL32XX + + comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)" + ++config LEDS_NU801 ++ tristate "LED driver for NU801 RGB LED" ++ depends on LEDS_CLASS && (ATH79_MACH_MR18 || ATH79_MACH_Z1) ++ help ++ This option enables support for NU801 RGB LED driver chips ++ accessed via GPIO. ++ + config LEDS_BLINKM + tristate "LED support for the BlinkM I2C RGB LED" + depends on LEDS_CLASS +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -56,6 +56,7 @@ obj-$(CONFIG_LEDS_ADP5520) += leds-adp5 + obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o + obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o + obj-$(CONFIG_LEDS_RB750) += leds-rb750.o ++obj-$(CONFIG_LEDS_NU801) += leds-nu801.o + obj-$(CONFIG_LEDS_NS2) += leds-ns2.o + obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o + obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o diff --git a/target/linux/ar71xx/patches-4.9/820-MIPS-ath79-add_gpio_function2_setup.patch b/target/linux/ar71xx/patches-4.9/820-MIPS-ath79-add_gpio_function2_setup.patch new file mode 100644 index 0000000000..afa7b69b43 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/820-MIPS-ath79-add_gpio_function2_setup.patch @@ -0,0 +1,67 @@ +Add access to the function2 gpio register. This probably has to be +converted into a pimux driver later on. This is needed for some setup +functions on the Arduino Yun. + +--- a/arch/mips/ath79/common.h ++++ b/arch/mips/ath79/common.h +@@ -29,6 +29,7 @@ void ath79_ddr_ctrl_init(void); + void ath79_gpio_function_enable(u32 mask); + void ath79_gpio_function_disable(u32 mask); + void ath79_gpio_function_setup(u32 set, u32 clear); ++void ath79_gpio_function2_setup(u32 set, u32 clear); + void ath79_gpio_output_select(unsigned gpio, u8 val); + int ath79_gpio_direction_select(unsigned gpio, bool oe); + void ath79_gpio_init(void); +--- a/arch/mips/ath79/gpio.c ++++ b/arch/mips/ath79/gpio.c +@@ -43,6 +43,31 @@ static void __iomem *ath79_gpio_get_func + return ath79_gpio_base + reg; + } + ++static void __iomem *ath79_gpio_get_function2_reg(void) ++{ ++ u32 reg = 0; ++ ++ if (soc_is_ar71xx() || ++ soc_is_ar724x() || ++ soc_is_ar913x() || ++ soc_is_ar933x()) ++ reg = AR71XX_GPIO_REG_FUNC_2; ++ else ++ BUG(); ++ ++ return ath79_gpio_base + reg; ++} ++ ++ ++void ath79_gpio_function2_setup(u32 set, u32 clear) ++{ ++ void __iomem *reg = ath79_gpio_get_function2_reg(); ++ ++ __raw_writel((__raw_readl(reg) & ~clear) | set, reg); ++ /* flush write */ ++ __raw_readl(reg); ++} ++ + void ath79_gpio_function_setup(u32 set, u32 clear) + { + void __iomem *reg = ath79_gpio_get_function_reg(); +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -865,6 +865,7 @@ + #define AR71XX_GPIO_REG_INT_PENDING 0x20 + #define AR71XX_GPIO_REG_INT_ENABLE 0x24 + #define AR71XX_GPIO_REG_FUNC 0x28 ++#define AR71XX_GPIO_REG_FUNC_2 0x30 + + #define AR934X_GPIO_REG_OUT_FUNC0 0x2c + #define AR934X_GPIO_REG_OUT_FUNC1 0x30 +@@ -989,6 +990,8 @@ + #define AR724X_GPIO_FUNC_UART_EN BIT(1) + #define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0) + ++#define AR933X_GPIO_FUNC2_JUMPSTART_DISABLE BIT(9) ++ + #define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22) + #define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21) + #define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20) diff --git a/target/linux/ar71xx/patches-4.9/900-mdio_bitbang_ignore_ta_value.patch b/target/linux/ar71xx/patches-4.9/900-mdio_bitbang_ignore_ta_value.patch new file mode 100644 index 0000000000..8f8f349a66 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/900-mdio_bitbang_ignore_ta_value.patch @@ -0,0 +1,32 @@ +--- a/drivers/net/phy/mdio-bitbang.c ++++ b/drivers/net/phy/mdio-bitbang.c +@@ -155,7 +155,7 @@ static int mdiobb_cmd_addr(struct mdiobb + static int mdiobb_read(struct mii_bus *bus, int phy, int reg) + { + struct mdiobb_ctrl *ctrl = bus->priv; +- int ret, i; ++ int ret; + + if (reg & MII_ADDR_C45) { + reg = mdiobb_cmd_addr(ctrl, phy, reg); +@@ -165,19 +165,7 @@ static int mdiobb_read(struct mii_bus *b + + ctrl->ops->set_mdio_dir(ctrl, 0); + +- /* check the turnaround bit: the PHY should be driving it to zero, if this +- * PHY is listed in phy_ignore_ta_mask as having broken TA, skip that +- */ +- if (mdiobb_get_bit(ctrl) != 0 && +- !(bus->phy_ignore_ta_mask & (1 << phy))) { +- /* PHY didn't drive TA low -- flush any bits it +- * may be trying to send. +- */ +- for (i = 0; i < 32; i++) +- mdiobb_get_bit(ctrl); +- +- return 0xffff; +- } ++ mdiobb_get_bit(ctrl); + + ret = mdiobb_get_num(ctrl, 16); + mdiobb_get_bit(ctrl); diff --git a/target/linux/ar71xx/patches-4.9/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch b/target/linux/ar71xx/patches-4.9/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch new file mode 100644 index 0000000000..a830346a31 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch @@ -0,0 +1,61 @@ +From 66e584435ac0de6e0abeb6d7166fe4fe25d6bb73 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski <jogo@openwrt.org> +Date: Tue, 16 Jun 2015 13:15:08 +0200 +Subject: [PATCH] phy/mdio-bitbang: prevent rescheduling during command + +It seems some phys have some maximum timings for accessing the MDIO line, +resulting in bit errors under cpu stress. Prevent this from happening by +disabling interrupts when sending commands. + +Signed-off-by: Jonas Gorski <jogo@openwrt.org> +--- + drivers/net/phy/mdio-bitbang.c | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/drivers/net/phy/mdio-bitbang.c ++++ b/drivers/net/phy/mdio-bitbang.c +@@ -17,6 +17,7 @@ + * kind, whether express or implied. + */ + ++#include <linux/irqflags.h> + #include <linux/module.h> + #include <linux/mdio-bitbang.h> + #include <linux/types.h> +@@ -156,7 +157,9 @@ static int mdiobb_read(struct mii_bus *b + { + struct mdiobb_ctrl *ctrl = bus->priv; + int ret; ++ unsigned long flags; + ++ local_irq_save(flags); + if (reg & MII_ADDR_C45) { + reg = mdiobb_cmd_addr(ctrl, phy, reg); + mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg); +@@ -169,13 +172,17 @@ static int mdiobb_read(struct mii_bus *b + + ret = mdiobb_get_num(ctrl, 16); + mdiobb_get_bit(ctrl); ++ local_irq_restore(flags); ++ + return ret; + } + + static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val) + { + struct mdiobb_ctrl *ctrl = bus->priv; ++ unsigned long flags; + ++ local_irq_save(flags); + if (reg & MII_ADDR_C45) { + reg = mdiobb_cmd_addr(ctrl, phy, reg); + mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg); +@@ -190,6 +197,8 @@ static int mdiobb_write(struct mii_bus * + + ctrl->ops->set_mdio_dir(ctrl, 0); + mdiobb_get_bit(ctrl); ++ local_irq_restore(flags); ++ + return 0; + } + diff --git a/target/linux/ar71xx/patches-4.9/902-at803x-add-reset-gpio-pdata.patch b/target/linux/ar71xx/patches-4.9/902-at803x-add-reset-gpio-pdata.patch new file mode 100644 index 0000000000..cb3ed89e98 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/902-at803x-add-reset-gpio-pdata.patch @@ -0,0 +1,68 @@ +Add support for configuring AT803x GPIO reset via platform data. +This is necessary, because ath79 is not converted to device tree yet. + +Signed-off-by: Felix Fietkau <nbd@nbd.name> + +--- a/include/linux/platform_data/phy-at803x.h ++++ b/include/linux/platform_data/phy-at803x.h +@@ -6,6 +6,8 @@ struct at803x_platform_data { + int enable_rgmii_tx_delay:1; + int enable_rgmii_rx_delay:1; + int fixup_rgmii_tx_delay:1; ++ int has_reset_gpio:1; ++ int reset_gpio; + }; + + #endif /* _PHY_AT803X_PDATA_H */ +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -264,6 +264,7 @@ static int at803x_resume(struct phy_devi + + static int at803x_probe(struct phy_device *phydev) + { ++ struct at803x_platform_data *pdata; + struct device *dev = &phydev->mdio.dev; + struct at803x_priv *priv; + struct gpio_desc *gpiod_reset; +@@ -276,6 +277,12 @@ static int at803x_probe(struct phy_devic + phydev->drv->phy_id != ATH8032_PHY_ID) + goto does_not_require_reset_workaround; + ++ pdata = dev_get_platdata(dev); ++ if (pdata && pdata->has_reset_gpio) { ++ devm_gpio_request(dev, pdata->reset_gpio, "reset"); ++ gpio_direction_output(pdata->reset_gpio, 1); ++ } ++ + gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(gpiod_reset)) + return PTR_ERR(gpiod_reset); +@@ -407,15 +414,23 @@ static void at803x_link_change_notify(st + * cannot recover from by software. + */ + if (phydev->state == PHY_NOLINK) { +- if (priv->gpiod_reset && !priv->phy_reset) { ++ if ((priv->gpiod_reset || (pdata && pdata->has_reset_gpio)) && ++ !priv->phy_reset) { + struct at803x_context context; + + at803x_context_save(phydev, &context); + +- gpiod_set_value(priv->gpiod_reset, 1); +- msleep(1); +- gpiod_set_value(priv->gpiod_reset, 0); +- msleep(1); ++ if (pdata && pdata->has_reset_gpio) { ++ gpio_set_value_cansleep(pdata->reset_gpio, 0); ++ msleep(1); ++ gpio_set_value_cansleep(pdata->reset_gpio, 1); ++ msleep(1); ++ } else { ++ gpiod_set_value(priv->gpiod_reset, 1); ++ msleep(1); ++ gpiod_set_value(priv->gpiod_reset, 0); ++ msleep(1); ++ } + + at803x_context_restore(phydev, &context); + diff --git a/target/linux/ar71xx/patches-4.9/910-unaligned_access_hacks.patch b/target/linux/ar71xx/patches-4.9/910-unaligned_access_hacks.patch new file mode 100644 index 0000000000..21ceca156f --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/910-unaligned_access_hacks.patch @@ -0,0 +1,888 @@ +--- a/arch/mips/include/asm/checksum.h ++++ b/arch/mips/include/asm/checksum.h +@@ -134,26 +134,30 @@ static inline __sum16 ip_fast_csum(const + const unsigned int *stop = word + ihl; + unsigned int csum; + int carry; ++ unsigned int w; + +- csum = word[0]; +- csum += word[1]; +- carry = (csum < word[1]); ++ csum = net_hdr_word(word++); ++ ++ w = net_hdr_word(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; + +- csum += word[2]; +- carry = (csum < word[2]); ++ w = net_hdr_word(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; + +- csum += word[3]; +- carry = (csum < word[3]); ++ w = net_hdr_word(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; + +- word += 4; + do { +- csum += *word; +- carry = (csum < *word); ++ w = net_hdr_word(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; +- word++; + } while (word != stop); + + return csum_fold(csum); +@@ -214,73 +218,6 @@ static inline __sum16 ip_compute_csum(co + return csum_fold(csum_partial(buff, len, 0)); + } + +-#define _HAVE_ARCH_IPV6_CSUM +-static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, +- const struct in6_addr *daddr, +- __u32 len, __u8 proto, +- __wsum sum) +-{ +- __wsum tmp; +- +- __asm__( +- " .set push # csum_ipv6_magic\n" +- " .set noreorder \n" +- " .set noat \n" +- " addu %0, %5 # proto (long in network byte order)\n" +- " sltu $1, %0, %5 \n" +- " addu %0, $1 \n" +- +- " addu %0, %6 # csum\n" +- " sltu $1, %0, %6 \n" +- " lw %1, 0(%2) # four words source address\n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 4(%2) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 8(%2) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 12(%2) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 0(%3) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 4(%3) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 8(%3) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " lw %1, 12(%3) \n" +- " addu %0, $1 \n" +- " addu %0, %1 \n" +- " sltu $1, %0, %1 \n" +- +- " addu %0, $1 # Add final carry\n" +- " .set pop" +- : "=&r" (sum), "=&r" (tmp) +- : "r" (saddr), "r" (daddr), +- "0" (htonl(len)), "r" (htonl(proto)), "r" (sum)); +- +- return csum_fold(sum); +-} +- + #include <asm-generic/checksum.h> + #endif /* CONFIG_GENERIC_CSUM */ + +--- a/include/uapi/linux/ip.h ++++ b/include/uapi/linux/ip.h +@@ -102,7 +102,7 @@ struct iphdr { + __be32 saddr; + __be32 daddr; + /*The options start here. */ +-}; ++} __attribute__((packed, aligned(2))); + + + struct ip_auth_hdr { +--- a/include/uapi/linux/ipv6.h ++++ b/include/uapi/linux/ipv6.h +@@ -129,7 +129,7 @@ struct ipv6hdr { + + struct in6_addr saddr; + struct in6_addr daddr; +-}; ++} __attribute__((packed, aligned(2))); + + + /* index values for the variables in ipv6_devconf */ +--- a/include/uapi/linux/tcp.h ++++ b/include/uapi/linux/tcp.h +@@ -54,7 +54,7 @@ struct tcphdr { + __be16 window; + __sum16 check; + __be16 urg_ptr; +-}; ++} __attribute__((packed, aligned(2))); + + /* + * The union cast uses a gcc extension to avoid aliasing problems +@@ -64,7 +64,7 @@ struct tcphdr { + union tcp_word_hdr { + struct tcphdr hdr; + __be32 words[5]; +-}; ++} __attribute__((packed, aligned(2))); + + #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) + +--- a/include/uapi/linux/udp.h ++++ b/include/uapi/linux/udp.h +@@ -24,7 +24,7 @@ struct udphdr { + __be16 dest; + __be16 len; + __sum16 check; +-}; ++} __attribute__((packed, aligned(2))); + + /* UDP socket options */ + #define UDP_CORK 1 /* Never send partially complete segments */ +--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c ++++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c +@@ -41,8 +41,8 @@ static bool ipv4_pkt_to_tuple(const stru + if (ap == NULL) + return false; + +- tuple->src.u3.ip = ap[0]; +- tuple->dst.u3.ip = ap[1]; ++ tuple->src.u3.ip = net_hdr_word(ap++); ++ tuple->dst.u3.ip = net_hdr_word(ap); + + return true; + } +--- a/include/uapi/linux/icmp.h ++++ b/include/uapi/linux/icmp.h +@@ -81,7 +81,7 @@ struct icmphdr { + } frag; + __u8 reserved[4]; + } un; +-}; ++} __attribute__((packed, aligned(2))); + + + /* +--- a/include/uapi/linux/in6.h ++++ b/include/uapi/linux/in6.h +@@ -42,7 +42,7 @@ struct in6_addr { + #define s6_addr16 in6_u.u6_addr16 + #define s6_addr32 in6_u.u6_addr32 + #endif +-}; ++} __attribute__((packed, aligned(2))); + #endif /* __UAPI_DEF_IN6_ADDR */ + + #if __UAPI_DEF_SOCKADDR_IN6 +--- a/net/ipv6/tcp_ipv6.c ++++ b/net/ipv6/tcp_ipv6.c +@@ -39,6 +39,7 @@ + #include <linux/ipsec.h> + #include <linux/times.h> + #include <linux/slab.h> ++#include <asm/unaligned.h> + #include <linux/uaccess.h> + #include <linux/ipv6.h> + #include <linux/icmpv6.h> +@@ -796,10 +797,10 @@ static void tcp_v6_send_response(const s + topt = (__be32 *)(t1 + 1); + + if (tsecr) { +- *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | +- (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP); +- *topt++ = htonl(tsval); +- *topt++ = htonl(tsecr); ++ put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | ++ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++); ++ put_unaligned_be32(tsval, topt++); ++ put_unaligned_be32(tsecr, topt++); + } + + #ifdef CONFIG_TCP_MD5SIG +--- a/include/linux/ipv6.h ++++ b/include/linux/ipv6.h +@@ -5,6 +5,7 @@ + + #define ipv6_optlen(p) (((p)->hdrlen+1) << 3) + #define ipv6_authlen(p) (((p)->hdrlen+2) << 2) ++ + /* + * This structure contains configuration options per IPv6 link. + */ +--- a/net/ipv6/datagram.c ++++ b/net/ipv6/datagram.c +@@ -471,7 +471,7 @@ int ipv6_recv_error(struct sock *sk, str + ipv6_iface_scope_id(&sin->sin6_addr, + IP6CB(skb)->iif); + } else { +- ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset), ++ ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset), + &sin->sin6_addr); + sin->sin6_scope_id = 0; + } +@@ -814,12 +814,12 @@ int ip6_datagram_send_ctl(struct net *ne + } + + if (fl6->flowlabel&IPV6_FLOWINFO_MASK) { +- if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) { ++ if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) { + err = -EINVAL; + goto exit_f; + } + } +- fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg); ++ fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg)); + break; + + case IPV6_2292HOPOPTS: +--- a/net/ipv6/ip6_gre.c ++++ b/net/ipv6/ip6_gre.c +@@ -394,7 +394,7 @@ static void ip6gre_err(struct sk_buff *s + return; + ipv6h = (const struct ipv6hdr *)skb->data; + greh = (const struct gre_base_hdr *)(skb->data + offset); +- key = key_off ? *(__be32 *)(skb->data + key_off) : 0; ++ key = key_off ? net_hdr_word((__be32 *)(skb->data + key_off)) : 0; + + t = ip6gre_tunnel_lookup(skb->dev, &ipv6h->daddr, &ipv6h->saddr, + key, greh->protocol); +--- a/net/ipv6/exthdrs.c ++++ b/net/ipv6/exthdrs.c +@@ -574,7 +574,7 @@ static bool ipv6_hop_jumbo(struct sk_buf + goto drop; + } + +- pkt_len = ntohl(*(__be32 *)(nh + optoff + 2)); ++ pkt_len = ntohl(net_hdr_word(nh + optoff + 2)); + if (pkt_len <= IPV6_MAXPLEN) { + __IP6_INC_STATS(net, ipv6_skb_idev(skb), + IPSTATS_MIB_INHDRERRORS); +--- a/include/linux/types.h ++++ b/include/linux/types.h +@@ -231,5 +231,11 @@ typedef void (*call_rcu_func_t)(struct r + /* clocksource cycle base type */ + typedef u64 cycle_t; + ++struct net_hdr_word { ++ u32 words[1]; ++} __attribute__((packed, aligned(2))); ++ ++#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0]) ++ + #endif /* __ASSEMBLY__ */ + #endif /* _LINUX_TYPES_H */ +--- a/net/ipv4/af_inet.c ++++ b/net/ipv4/af_inet.c +@@ -1318,8 +1318,8 @@ struct sk_buff **inet_gro_receive(struct + if (unlikely(ip_fast_csum((u8 *)iph, 5))) + goto out_unlock; + +- id = ntohl(*(__be32 *)&iph->id); +- flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF)); ++ id = ntohl(net_hdr_word(&iph->id)); ++ flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id & ~IP_DF)); + id >>= 16; + + for (p = *head; p; p = p->next) { +--- a/net/ipv4/route.c ++++ b/net/ipv4/route.c +@@ -458,7 +458,7 @@ static struct neighbour *ipv4_neigh_look + else if (skb) + pkey = &ip_hdr(skb)->daddr; + +- n = __ipv4_neigh_lookup(dev, *(__force u32 *)pkey); ++ n = __ipv4_neigh_lookup(dev, net_hdr_word(pkey)); + if (n) + return n; + return neigh_create(&arp_tbl, pkey, dev); +--- a/net/ipv4/tcp_output.c ++++ b/net/ipv4/tcp_output.c +@@ -448,48 +448,53 @@ static void tcp_options_write(__be32 *pt + u16 options = opts->options; /* mungable copy */ + + if (unlikely(OPTION_MD5 & options)) { +- *ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | +- (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | ++ (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG); + /* overload cookie hash location */ + opts->hash_location = (__u8 *)ptr; + ptr += 4; + } + + if (unlikely(opts->mss)) { +- *ptr++ = htonl((TCPOPT_MSS << 24) | +- (TCPOLEN_MSS << 16) | +- opts->mss); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) | ++ opts->mss); + } + + if (likely(OPTION_TS & options)) { + if (unlikely(OPTION_SACK_ADVERTISE & options)) { +- *ptr++ = htonl((TCPOPT_SACK_PERM << 24) | +- (TCPOLEN_SACK_PERM << 16) | +- (TCPOPT_TIMESTAMP << 8) | +- TCPOLEN_TIMESTAMP); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_SACK_PERM << 24) | ++ (TCPOLEN_SACK_PERM << 16) | ++ (TCPOPT_TIMESTAMP << 8) | ++ TCPOLEN_TIMESTAMP); + options &= ~OPTION_SACK_ADVERTISE; + } else { +- *ptr++ = htonl((TCPOPT_NOP << 24) | +- (TCPOPT_NOP << 16) | +- (TCPOPT_TIMESTAMP << 8) | +- TCPOLEN_TIMESTAMP); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | ++ (TCPOPT_NOP << 16) | ++ (TCPOPT_TIMESTAMP << 8) | ++ TCPOLEN_TIMESTAMP); + } +- *ptr++ = htonl(opts->tsval); +- *ptr++ = htonl(opts->tsecr); ++ net_hdr_word(ptr++) = htonl(opts->tsval); ++ net_hdr_word(ptr++) = htonl(opts->tsecr); + } + + if (unlikely(OPTION_SACK_ADVERTISE & options)) { +- *ptr++ = htonl((TCPOPT_NOP << 24) | +- (TCPOPT_NOP << 16) | +- (TCPOPT_SACK_PERM << 8) | +- TCPOLEN_SACK_PERM); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | ++ (TCPOPT_NOP << 16) | ++ (TCPOPT_SACK_PERM << 8) | ++ TCPOLEN_SACK_PERM); + } + + if (unlikely(OPTION_WSCALE & options)) { +- *ptr++ = htonl((TCPOPT_NOP << 24) | +- (TCPOPT_WINDOW << 16) | +- (TCPOLEN_WINDOW << 8) | +- opts->ws); ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | ++ (TCPOPT_WINDOW << 16) | ++ (TCPOLEN_WINDOW << 8) | ++ opts->ws); + } + + if (unlikely(opts->num_sack_blocks)) { +@@ -497,16 +502,17 @@ static void tcp_options_write(__be32 *pt + tp->duplicate_sack : tp->selective_acks; + int this_sack; + +- *ptr++ = htonl((TCPOPT_NOP << 24) | +- (TCPOPT_NOP << 16) | +- (TCPOPT_SACK << 8) | +- (TCPOLEN_SACK_BASE + (opts->num_sack_blocks * ++ net_hdr_word(ptr++) = ++ htonl((TCPOPT_NOP << 24) | ++ (TCPOPT_NOP << 16) | ++ (TCPOPT_SACK << 8) | ++ (TCPOLEN_SACK_BASE + (opts->num_sack_blocks * + TCPOLEN_SACK_PERBLOCK))); + + for (this_sack = 0; this_sack < opts->num_sack_blocks; + ++this_sack) { +- *ptr++ = htonl(sp[this_sack].start_seq); +- *ptr++ = htonl(sp[this_sack].end_seq); ++ net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq); ++ net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq); + } + + tp->rx_opt.dsack = 0; +@@ -519,13 +525,14 @@ static void tcp_options_write(__be32 *pt + + if (foc->exp) { + len = TCPOLEN_EXP_FASTOPEN_BASE + foc->len; +- *ptr = htonl((TCPOPT_EXP << 24) | (len << 16) | ++ net_hdr_word(ptr) = ++ htonl((TCPOPT_EXP << 24) | (len << 16) | + TCPOPT_FASTOPEN_MAGIC); + p += TCPOLEN_EXP_FASTOPEN_BASE; + } else { + len = TCPOLEN_FASTOPEN_BASE + foc->len; +- *p++ = TCPOPT_FASTOPEN; +- *p++ = len; ++ net_hdr_word(p++) = TCPOPT_FASTOPEN; ++ net_hdr_word(p++) = len; + } + + memcpy(p, foc->val, foc->len); +--- a/net/ipv4/igmp.c ++++ b/net/ipv4/igmp.c +@@ -509,7 +509,7 @@ static struct sk_buff *add_grec(struct s + if (!skb) + return NULL; + psrc = (__be32 *)skb_put(skb, sizeof(__be32)); +- *psrc = psf->sf_inaddr; ++ net_hdr_word(psrc) = psf->sf_inaddr; + scount++; stotal++; + if ((type == IGMPV3_ALLOW_NEW_SOURCES || + type == IGMPV3_BLOCK_OLD_SOURCES) && psf->sf_crcount) { +--- a/include/uapi/linux/igmp.h ++++ b/include/uapi/linux/igmp.h +@@ -32,7 +32,7 @@ struct igmphdr { + __u8 code; /* For newer IGMP */ + __sum16 csum; + __be32 group; +-}; ++} __attribute__((packed, aligned(2))); + + /* V3 group record types [grec_type] */ + #define IGMPV3_MODE_IS_INCLUDE 1 +@@ -48,7 +48,7 @@ struct igmpv3_grec { + __be16 grec_nsrcs; + __be32 grec_mca; + __be32 grec_src[0]; +-}; ++} __attribute__((packed, aligned(2))); + + struct igmpv3_report { + __u8 type; +@@ -57,7 +57,7 @@ struct igmpv3_report { + __be16 resv2; + __be16 ngrec; + struct igmpv3_grec grec[0]; +-}; ++} __attribute__((packed, aligned(2))); + + struct igmpv3_query { + __u8 type; +@@ -78,7 +78,7 @@ struct igmpv3_query { + __u8 qqic; + __be16 nsrcs; + __be32 srcs[0]; +-}; ++} __attribute__((packed, aligned(2))); + + #define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */ + #define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */ +--- a/net/core/flow_dissector.c ++++ b/net/core/flow_dissector.c +@@ -84,7 +84,7 @@ __be32 __skb_flow_get_ports(const struct + ports = __skb_header_pointer(skb, thoff + poff, + sizeof(_ports), data, hlen, &_ports); + if (ports) +- return *ports; ++ return (__be32)net_hdr_word(ports); + } + + return 0; +--- a/include/uapi/linux/icmpv6.h ++++ b/include/uapi/linux/icmpv6.h +@@ -76,7 +76,7 @@ struct icmp6hdr { + #define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other + #define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime + #define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref +-}; ++} __attribute__((packed, aligned(2))); + + + #define ICMPV6_ROUTER_PREF_LOW 0x3 +--- a/include/net/ndisc.h ++++ b/include/net/ndisc.h +@@ -87,7 +87,7 @@ struct ra_msg { + struct icmp6hdr icmph; + __be32 reachable_time; + __be32 retrans_timer; +-}; ++} __attribute__((packed, aligned(2))); + + struct rd_msg { + struct icmp6hdr icmph; +@@ -365,10 +365,10 @@ static inline u32 ndisc_hashfn(const voi + { + const u32 *p32 = pkey; + +- return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) + +- (p32[1] * hash_rnd[1]) + +- (p32[2] * hash_rnd[2]) + +- (p32[3] * hash_rnd[3])); ++ return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) + ++ (net_hdr_word(&p32[1]) * hash_rnd[1]) + ++ (net_hdr_word(&p32[2]) * hash_rnd[2]) + ++ (net_hdr_word(&p32[3]) * hash_rnd[3])); + } + + static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey) +--- a/net/sched/cls_u32.c ++++ b/net/sched/cls_u32.c +@@ -159,7 +159,7 @@ next_knode: + data = skb_header_pointer(skb, toff, 4, &hdata); + if (!data) + goto out; +- if ((*data ^ key->val) & key->mask) { ++ if ((net_hdr_word(data) ^ key->val) & key->mask) { + n = rcu_dereference_bh(n->next); + goto next_knode; + } +@@ -212,8 +212,8 @@ check_terminal: + &hdata); + if (!data) + goto out; +- sel = ht->divisor & u32_hash_fold(*data, &n->sel, +- n->fshift); ++ sel = ht->divisor & u32_hash_fold(net_hdr_word(data), ++ &n->sel, n->fshift); + } + if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT))) + goto next_ht; +--- a/net/ipv6/ip6_offload.c ++++ b/net/ipv6/ip6_offload.c +@@ -220,7 +220,7 @@ static struct sk_buff **ipv6_gro_receive + continue; + + iph2 = (struct ipv6hdr *)(p->data + off); +- first_word = *(__be32 *)iph ^ *(__be32 *)iph2; ++ first_word = net_hdr_word(iph) ^ net_hdr_word(iph2); + + /* All fields must match except length and Traffic Class. + * XXX skbs on the gro_list have all been parsed and pulled +--- a/include/net/addrconf.h ++++ b/include/net/addrconf.h +@@ -46,7 +46,7 @@ struct prefix_info { + __be32 reserved2; + + struct in6_addr prefix; +-}; ++} __attribute__((packed, aligned(2))); + + + #include <linux/netdevice.h> +--- a/include/net/inet_ecn.h ++++ b/include/net/inet_ecn.h +@@ -124,9 +124,9 @@ static inline int IP6_ECN_set_ce(struct + if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph))) + return 0; + +- from = *(__be32 *)iph; ++ from = net_hdr_word(iph); + to = from | htonl(INET_ECN_CE << 20); +- *(__be32 *)iph = to; ++ net_hdr_word(iph) = to; + if (skb->ip_summed == CHECKSUM_COMPLETE) + skb->csum = csum_add(csum_sub(skb->csum, (__force __wsum)from), + (__force __wsum)to); +@@ -135,7 +135,7 @@ static inline int IP6_ECN_set_ce(struct + + static inline void IP6_ECN_clear(struct ipv6hdr *iph) + { +- *(__be32*)iph &= ~htonl(INET_ECN_MASK << 20); ++ net_hdr_word(iph) &= ~htonl(INET_ECN_MASK << 20); + } + + static inline void ipv6_copy_dscp(unsigned int dscp, struct ipv6hdr *inner) +--- a/include/net/ipv6.h ++++ b/include/net/ipv6.h +@@ -107,7 +107,7 @@ struct frag_hdr { + __u8 reserved; + __be16 frag_off; + __be32 identification; +-}; ++} __attribute__((packed, aligned(2))); + + #define IP6_MF 0x0001 + #define IP6_OFFSET 0xFFF8 +@@ -449,8 +449,8 @@ static inline void __ipv6_addr_set_half( + } + #endif + #endif +- addr[0] = wh; +- addr[1] = wl; ++ net_hdr_word(&addr[0]) = wh; ++ net_hdr_word(&addr[1]) = wl; + } + + static inline void ipv6_addr_set(struct in6_addr *addr, +@@ -509,6 +509,8 @@ static inline bool ipv6_prefix_equal(con + const __be32 *a1 = addr1->s6_addr32; + const __be32 *a2 = addr2->s6_addr32; + unsigned int pdw, pbi; ++ /* Used for last <32-bit fraction of prefix */ ++ u32 pbia1, pbia2; + + /* check complete u32 in prefix */ + pdw = prefixlen >> 5; +@@ -517,7 +519,9 @@ static inline bool ipv6_prefix_equal(con + + /* check incomplete u32 in prefix */ + pbi = prefixlen & 0x1f; +- if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi)))) ++ pbia1 = net_hdr_word(&a1[pdw]); ++ pbia2 = net_hdr_word(&a2[pdw]); ++ if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi)))) + return false; + + return true; +@@ -661,13 +665,13 @@ static inline void ipv6_addr_set_v4mappe + */ + static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen) + { +- const __be32 *a1 = token1, *a2 = token2; ++ const struct in6_addr *a1 = token1, *a2 = token2; + int i; + + addrlen >>= 2; + + for (i = 0; i < addrlen; i++) { +- __be32 xb = a1[i] ^ a2[i]; ++ __be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i]; + if (xb) + return i * 32 + 31 - __fls(ntohl(xb)); + } +@@ -836,17 +840,18 @@ static inline int ip6_default_np_autolab + static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass, + __be32 flowlabel) + { +- *(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel; ++ net_hdr_word((__be32 *)hdr) = ++ htonl(0x60000000 | (tclass << 20)) | flowlabel; + } + + static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr) + { +- return *(__be32 *)hdr & IPV6_FLOWINFO_MASK; ++ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK; + } + + static inline __be32 ip6_flowlabel(const struct ipv6hdr *hdr) + { +- return *(__be32 *)hdr & IPV6_FLOWLABEL_MASK; ++ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWLABEL_MASK; + } + + static inline u8 ip6_tclass(__be32 flowinfo) +--- a/include/net/secure_seq.h ++++ b/include/net/secure_seq.h +@@ -2,6 +2,7 @@ + #define _NET_SECURE_SEQ + + #include <linux/types.h> ++#include <linux/in6.h> + + u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport); + u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr, +--- a/include/uapi/linux/in.h ++++ b/include/uapi/linux/in.h +@@ -83,7 +83,7 @@ enum { + /* Internet address. */ + struct in_addr { + __be32 s_addr; +-}; ++} __attribute__((packed, aligned(2))); + #endif + + #define IP_TOS 1 +--- a/net/core/secure_seq.c ++++ b/net/core/secure_seq.c +@@ -46,11 +46,12 @@ __u32 secure_tcpv6_sequence_number(const + u32 secret[MD5_MESSAGE_BYTES / 4]; + u32 hash[MD5_DIGEST_WORDS]; + u32 i; ++ const struct in6_addr *daddr6 = (struct in6_addr *) daddr; + + net_secret_init(); + memcpy(hash, saddr, 16); + for (i = 0; i < 4; i++) +- secret[i] = net_secret[i] + (__force u32)daddr[i]; ++ secret[i] = net_secret[i] + (__force u32)daddr6->s6_addr32[i]; + secret[4] = net_secret[4] + + (((__force u16)sport << 16) + (__force u16)dport); + for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++) +@@ -68,11 +69,12 @@ u32 secure_ipv6_port_ephemeral(const __b + u32 secret[MD5_MESSAGE_BYTES / 4]; + u32 hash[MD5_DIGEST_WORDS]; + u32 i; ++ const struct in6_addr *daddr6 = (struct in6_addr *) daddr; + + net_secret_init(); + memcpy(hash, saddr, 16); + for (i = 0; i < 4; i++) +- secret[i] = net_secret[i] + (__force u32) daddr[i]; ++ secret[i] = net_secret[i] + (__force u32) daddr6->s6_addr32[i]; + secret[4] = net_secret[4] + (__force u32)dport; + for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++) + secret[i] = net_secret[i]; +@@ -146,6 +148,7 @@ EXPORT_SYMBOL(secure_dccp_sequence_numbe + u64 secure_dccpv6_sequence_number(__be32 *saddr, __be32 *daddr, + __be16 sport, __be16 dport) + { ++ const struct in6_addr *daddr6 = (struct in6_addr *) daddr; + u32 secret[MD5_MESSAGE_BYTES / 4]; + u32 hash[MD5_DIGEST_WORDS]; + u64 seq; +@@ -154,7 +157,7 @@ u64 secure_dccpv6_sequence_number(__be32 + net_secret_init(); + memcpy(hash, saddr, 16); + for (i = 0; i < 4; i++) +- secret[i] = net_secret[i] + (__force u32)daddr[i]; ++ secret[i] = net_secret[i] + (__force u32)daddr6->s6_addr32[i]; + secret[4] = net_secret[4] + + (((__force u16)sport << 16) + (__force u16)dport); + for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++) +--- a/net/ipv6/ip6_fib.c ++++ b/net/ipv6/ip6_fib.c +@@ -136,7 +136,7 @@ static __be32 addr_bit_set(const void *t + * See include/asm-generic/bitops/le.h. + */ + return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) & +- addr[fn_bit >> 5]; ++ net_hdr_word(&addr[fn_bit >> 5]); + } + + static struct fib6_node *node_alloc(void) +--- a/net/netfilter/nf_conntrack_proto_tcp.c ++++ b/net/netfilter/nf_conntrack_proto_tcp.c +@@ -452,7 +452,7 @@ static void tcp_sack(const struct sk_buf + + /* Fast path for timestamp-only option */ + if (length == TCPOLEN_TSTAMP_ALIGNED +- && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24) ++ && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24) + | (TCPOPT_NOP << 16) + | (TCPOPT_TIMESTAMP << 8) + | TCPOLEN_TIMESTAMP)) +--- a/net/xfrm/xfrm_input.c ++++ b/net/xfrm/xfrm_input.c +@@ -154,8 +154,8 @@ int xfrm_parse_spi(struct sk_buff *skb, + if (!pskb_may_pull(skb, hlen)) + return -EINVAL; + +- *spi = *(__be32 *)(skb_transport_header(skb) + offset); +- *seq = *(__be32 *)(skb_transport_header(skb) + offset_seq); ++ *spi = net_hdr_word(skb_transport_header(skb) + offset); ++ *seq = net_hdr_word(skb_transport_header(skb) + offset_seq); + return 0; + } + +--- a/net/ipv4/tcp_input.c ++++ b/net/ipv4/tcp_input.c +@@ -3886,14 +3886,16 @@ static bool tcp_parse_aligned_timestamp( + { + const __be32 *ptr = (const __be32 *)(th + 1); + +- if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) +- | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) { ++ if (net_hdr_word(ptr) == ++ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | ++ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) { + tp->rx_opt.saw_tstamp = 1; + ++ptr; +- tp->rx_opt.rcv_tsval = ntohl(*ptr); ++ tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr); + ++ptr; +- if (*ptr) +- tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset; ++ if (net_hdr_word(ptr)) ++ tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) - ++ tp->tsoffset; + else + tp->rx_opt.rcv_tsecr = 0; + return true; +--- a/include/uapi/linux/if_pppox.h ++++ b/include/uapi/linux/if_pppox.h +@@ -50,6 +50,7 @@ struct pppoe_addr { + */ + struct pptp_addr { + __u16 call_id; ++ __u16 pad; + struct in_addr sin_addr; + }; + +--- a/net/ipv6/netfilter/nf_log_ipv6.c ++++ b/net/ipv6/netfilter/nf_log_ipv6.c +@@ -66,9 +66,9 @@ static void dump_ipv6_packet(struct nf_l + /* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */ + nf_log_buf_add(m, "LEN=%Zu TC=%u HOPLIMIT=%u FLOWLBL=%u ", + ntohs(ih->payload_len) + sizeof(struct ipv6hdr), +- (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20, ++ (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20, + ih->hop_limit, +- (ntohl(*(__be32 *)ih) & 0x000fffff)); ++ (ntohl(net_hdr_word(ih)) & 0x000fffff)); + + fragment = 0; + ptr = ip6hoff + sizeof(struct ipv6hdr); +--- a/include/net/neighbour.h ++++ b/include/net/neighbour.h +@@ -263,8 +263,10 @@ static inline bool neigh_key_eq128(const + const u32 *n32 = (const u32 *)n->primary_key; + const u32 *p32 = pkey; + +- return ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) | +- (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0; ++ return ((n32[0] ^ net_hdr_word(&p32[0])) | ++ (n32[1] ^ net_hdr_word(&p32[1])) | ++ (n32[2] ^ net_hdr_word(&p32[2])) | ++ (n32[3] ^ net_hdr_word(&p32[3]))) == 0; + } + + static inline struct neighbour *___neigh_lookup_noref( +--- a/include/uapi/linux/netfilter_arp/arp_tables.h ++++ b/include/uapi/linux/netfilter_arp/arp_tables.h +@@ -69,7 +69,7 @@ struct arpt_arp { + __u8 flags; + /* Inverse flags */ + __u16 invflags; +-}; ++} __attribute__((aligned(4))); + + /* Values for "flag" field in struct arpt_ip (general arp structure). + * No flags defined yet. +--- a/net/core/utils.c ++++ b/net/core/utils.c +@@ -321,8 +321,14 @@ void inet_proto_csum_replace16(__sum16 * + bool pseudohdr) + { + __be32 diff[] = { +- ~from[0], ~from[1], ~from[2], ~from[3], +- to[0], to[1], to[2], to[3], ++ ~net_hdr_word(&from[0]), ++ ~net_hdr_word(&from[1]), ++ ~net_hdr_word(&from[2]), ++ ~net_hdr_word(&from[3]), ++ net_hdr_word(&to[0]), ++ net_hdr_word(&to[1]), ++ net_hdr_word(&to[2]), ++ net_hdr_word(&to[3]), + }; + if (skb->ip_summed != CHECKSUM_PARTIAL) { + *sum = csum_fold(csum_partial(diff, sizeof(diff), diff --git a/target/linux/ar71xx/patches-4.9/920-usb-chipidea-AR933x-platform-support.patch b/target/linux/ar71xx/patches-4.9/920-usb-chipidea-AR933x-platform-support.patch new file mode 100644 index 0000000000..740ffec4ac --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/920-usb-chipidea-AR933x-platform-support.patch @@ -0,0 +1,123 @@ +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -659,6 +659,7 @@ + + #define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18) + #define AR933X_BOOTSTRAP_EEPBUSY BIT(4) ++#define AR933X_BOOTSTRAP_USB_MODE_HOST BIT(3) + #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) + + #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23) +@@ -688,6 +689,8 @@ + + #define QCA956X_BOOTSTRAP_REF_CLK_40 BIT(2) + ++#define AR933X_USB_CONFIG_HOST_ONLY BIT(8) ++ + #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0) + #define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1) + #define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2) +--- a/arch/mips/ath79/dev-usb.c ++++ b/arch/mips/ath79/dev-usb.c +@@ -19,6 +19,9 @@ + #include <linux/platform_device.h> + #include <linux/usb/ehci_pdriver.h> + #include <linux/usb/ohci_pdriver.h> ++#include <linux/usb/otg.h> ++#include <linux/usb/chipidea.h> ++#include <linux/usb/usb_phy_generic.h> + + #include <asm/mach-ath79/ath79.h> + #include <asm/mach-ath79/ar71xx_regs.h> +@@ -170,6 +173,67 @@ static void __init ar913x_usb_setup(void + &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); + } + ++static void __init ar933x_usb_setup_ctrl_config(void) ++{ ++ void __iomem *usb_ctrl_base, *usb_config_reg; ++ u32 usb_config; ++ ++ usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE); ++ usb_config_reg = usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG; ++ usb_config = __raw_readl(usb_config_reg); ++ usb_config &= ~AR933X_USB_CONFIG_HOST_ONLY; ++ __raw_writel(usb_config, usb_config_reg); ++ iounmap(usb_ctrl_base); ++} ++ ++static void __init ar9xxx_ci_usb_setup(void) ++{ ++ struct ci_hdrc_platform_data ci_pdata; ++ enum usb_dr_mode dr_mode; ++ bool host_mode = true; ++ ++ if (soc_is_ar933x()) ++ host_mode = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP) & ++ AR933X_BOOTSTRAP_USB_MODE_HOST; ++ else if (soc_is_ar934x() || soc_is_qca955x()) ++ host_mode = !(ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP) & ++ AR934X_BOOTSTRAP_USB_MODE_DEVICE); ++ ++ if (host_mode) { ++ dr_mode = USB_DR_MODE_HOST; ++ } else { ++ dr_mode = USB_DR_MODE_PERIPHERAL; ++ if (soc_is_ar933x()) ++ ar933x_usb_setup_ctrl_config(); ++ } ++ ++ memset(&ci_pdata, 0, sizeof(ci_pdata)); ++ ci_pdata.name = "ci_hdrc_ar9xxx"; ++ ci_pdata.capoffset = DEF_CAPOFFSET; ++ ci_pdata.dr_mode = dr_mode; ++ ci_pdata.flags = CI_HDRC_DUAL_ROLE_NOT_OTG | CI_HDRC_DP_ALWAYS_PULLUP; ++ ci_pdata.vbus_extcon.edev = ERR_PTR(-ENODEV); ++ ci_pdata.id_extcon.edev = ERR_PTR(-ENODEV); ++ ci_pdata.itc_setting = 1; ++ ++ platform_device_register_simple("usb_phy_generic", ++ PLATFORM_DEVID_AUTO, NULL, 0); ++ ++ ath79_usb_register("ci_hdrc", -1, ++ AR933X_EHCI_BASE, AR933X_EHCI_SIZE, ++ ATH79_CPU_IRQ(3), ++ &ci_pdata, sizeof(ci_pdata)); ++ ++ if (!host_mode) ++ return; ++ ++ ath79_usb_register("ehci-platform", -1, ++ AR934X_EHCI_BASE, AR934X_EHCI_SIZE, ++ ATH79_CPU_IRQ(3), ++ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); ++ ++} ++ + static void __init ar933x_usb_setup(void) + { + ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE); +@@ -181,10 +245,7 @@ static void __init ar933x_usb_setup(void + ath79_device_reset_clear(AR933X_RESET_USB_PHY); + mdelay(10); + +- ath79_usb_register("ehci-platform", -1, +- AR933X_EHCI_BASE, AR933X_EHCI_SIZE, +- ATH79_CPU_IRQ(3), +- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); ++ ar9xxx_ci_usb_setup(); + } + + static void enable_tx_tx_idp_violation_fix(unsigned base) +@@ -230,10 +291,7 @@ static void __init ar934x_usb_setup(void + if (ath79_soc_rev >= 3) + ath79_ehci_pdata_v2.reset_notifier = ar934x_usb_reset_notifier; + +- ath79_usb_register("ehci-platform", -1, +- AR934X_EHCI_BASE, AR934X_EHCI_SIZE, +- ATH79_CPU_IRQ(3), +- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); ++ ar9xxx_ci_usb_setup(); + } + + static void __init qca953x_usb_setup(void) diff --git a/target/linux/ar71xx/patches-4.9/930-chipidea-pullup.patch b/target/linux/ar71xx/patches-4.9/930-chipidea-pullup.patch new file mode 100644 index 0000000000..ce31595d96 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/930-chipidea-pullup.patch @@ -0,0 +1,72 @@ +--- a/drivers/usb/chipidea/ci.h ++++ b/drivers/usb/chipidea/ci.h +@@ -199,6 +199,7 @@ struct hw_bank { + * @in_lpm: if the core in low power mode + * @wakeup_int: if wakeup interrupt occur + * @rev: The revision number for controller ++ * @dp_always_pullup: keep dp always pullup at device mode + */ + struct ci_hdrc { + struct device *dev; +@@ -248,6 +249,7 @@ struct ci_hdrc { + bool in_lpm; + bool wakeup_int; + enum ci_revision rev; ++ bool dp_always_pullup; + }; + + static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci) +--- a/drivers/usb/chipidea/core.c ++++ b/drivers/usb/chipidea/core.c +@@ -839,7 +839,7 @@ static inline void ci_role_destroy(struc + { + ci_hdrc_gadget_destroy(ci); + ci_hdrc_host_destroy(ci); +- if (ci->is_otg) ++ if (!ci->dp_always_pullup && ci->roles[CI_ROLE_GADGET]) + ci_hdrc_otg_destroy(ci); + } + +@@ -890,6 +890,9 @@ static int ci_hdrc_probe(struct platform + ci->supports_runtime_pm = !!(ci->platdata->flags & + CI_HDRC_SUPPORTS_RUNTIME_PM); + ++ ci->dp_always_pullup = !!(ci->platdata->flags & ++ CI_HDRC_DP_ALWAYS_PULLUP); ++ + ret = hw_device_init(ci, base); + if (ret < 0) { + dev_err(dev, "can't initialize hardware\n"); +@@ -955,7 +958,7 @@ static int ci_hdrc_probe(struct platform + goto deinit_phy; + } + +- if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) { ++ if (!ci->dp_always_pullup && ci->roles[CI_ROLE_GADGET]) { + ret = ci_hdrc_otg_init(ci); + if (ret) { + dev_err(dev, "init otg fails, ret = %d\n", ret); +--- a/drivers/usb/chipidea/otg.c ++++ b/drivers/usb/chipidea/otg.c +@@ -131,8 +131,10 @@ enum ci_role ci_otg_role(struct ci_hdrc + + void ci_handle_vbus_change(struct ci_hdrc *ci) + { +- if (!ci->is_otg) ++ if (ci->dp_always_pullup) { ++ usb_gadget_vbus_connect(&ci->gadget); + return; ++ } + + if (hw_read_otgsc(ci, OTGSC_BSV) && !ci->vbus_active) + usb_gadget_vbus_connect(&ci->gadget); +--- a/include/linux/usb/chipidea.h ++++ b/include/linux/usb/chipidea.h +@@ -57,6 +57,7 @@ struct ci_hdrc_platform_data { + #define CI_HDRC_OVERRIDE_AHB_BURST BIT(9) + #define CI_HDRC_OVERRIDE_TX_BURST BIT(10) + #define CI_HDRC_OVERRIDE_RX_BURST BIT(11) ++#define CI_HDRC_DP_ALWAYS_PULLUP BIT(12) + enum usb_dr_mode dr_mode; + #define CI_HDRC_CONTROLLER_RESET_EVENT 0 + #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1 |