diff options
Diffstat (limited to 'target/linux/ar71xx')
-rwxr-xr-x | target/linux/ar71xx/base-files/etc/board.d/02_network | 6 | ||||
-rw-r--r-- | target/linux/ar71xx/base-files/etc/diag.sh | 3 | ||||
-rwxr-xr-x | target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 | ||||
-rwxr-xr-x | target/linux/ar71xx/base-files/lib/upgrade/platform.sh | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/config-4.4 | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 9 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c | 158 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/image/generic.mk | 9 |
10 files changed, 192 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 0922550017..667d228410 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -411,6 +411,12 @@ gl-ar300) "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" ;; +jwap230) + ucidef_set_interfaces_lan_wan "eth0" "eth1" + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan" "5:wan" "6@eth1" + ;; + wpj342) ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:wan" diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 08e5fd0fc1..f517f9bad3 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -158,6 +158,9 @@ get_status_led() { ja76pf2) status_led="jjplus:green:led1" ;; + jwap230) + status_led="jwap230:green:led1" + ;; ls-sr71) status_led="ubnt:green:d22" ;; diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 936725fa58..4eed64b6fc 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -566,6 +566,9 @@ ar71xx_board_detect() { *JWAP003) name="jwap003" ;; + *JWAP230) + name="jwap230" + ;; *"Hornet-UB") local size size=$(awk '/firmware/ { print $2 }' /proc/mtd) diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index f5a8d0d0a7..119537e651 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -236,6 +236,7 @@ platform_check_image() { gl-domino | \ hiwifi-hc6361 | \ hornet-ub-x2 | \ + jwap230 | \ mzk-w04nu | \ mzk-w300nh | \ tew-632brp | \ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 4ecd09920f..6605558826 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -97,6 +97,7 @@ CONFIG_ATH79_MACH_HIWIFI_HC6361=y CONFIG_ATH79_MACH_HORNET_UB=y CONFIG_ATH79_MACH_JA76PF=y CONFIG_ATH79_MACH_JWAP003=y +CONFIG_ATH79_MACH_JWAP230=y CONFIG_ATH79_MACH_MC_MAC1200R=y CONFIG_ATH79_MACH_MR12=y CONFIG_ATH79_MACH_MR16=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 9ab6fed9b7..b0eada1daf 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -680,6 +680,15 @@ config ATH79_MACH_JWAP003 select ATH79_DEV_M25P80 select ATH79_DEV_USB +config ATH79_MACH_JWAP230 + bool "jjPlus JWAP230 board support" + select SOC_QCA955X + select ATH79_DEV_ETH + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_WRT160NL bool "Linksys WRT160NL board support" select SOC_AR913X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 33c274fcc4..390b17d452 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -100,6 +100,7 @@ obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o +obj-$(CONFIG_ATH79_MACH_JWAP230) += mach-jwap230.o obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o obj-$(CONFIG_ATH79_MACH_MR12) += mach-mr12.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c new file mode 100644 index 0000000000..f94e5b450c --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c @@ -0,0 +1,158 @@ +/* + * jjPlus JWAP230 board support + * + * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com> + * + * Based on mach-wpj558.c and mach-tl-wr1043nd-v2.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <linux/phy.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/ar8216_platform.h> + +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "pci.h" + +#define JWAP230_GPIO_LED_LED1 23 +#define JWAP230_GPIO_LED_LED2 22 +#define JWAP230_GPIO_LED_LED3 21 + +#define JWAP230_MAC0_OFFSET 0x0 +#define JWAP230_MAC1_OFFSET 0x6 +#define JWAP230_WMAC_CALDATA_OFFSET 0x1000 + +static struct gpio_led jwap230_leds_gpio[] __initdata = { + { + .name = "jwap230:green:led1", + .gpio = JWAP230_GPIO_LED_LED1, + .active_low = 1, + }, + { + .name = "jwap230:green:led2", + .gpio = JWAP230_GPIO_LED_LED2, + .active_low = 1, + }, + { + .name = "jwap230:green:led3", + .gpio = JWAP230_GPIO_LED_LED3, + .active_low = 1, + } +}; + +static const struct ar8327_led_info jwap230_leds_qca8337[] = { + AR8327_LED_INFO(PHY0_0, HW, "jwap230:green:lan"), + AR8327_LED_INFO(PHY4_0, HW, "jwap230:green:wan"), +}; + +/* Blink rate: 1 Gbps -> 8 hz, 100 Mbs -> 4 Hz, 10 Mbps -> 2 Hz */ +static struct ar8327_led_cfg jwap230_qca8337_led_cfg = { + .led_ctrl0 = 0xcf37cf37, + .led_ctrl1 = 0xcf37cf37, + .led_ctrl2 = 0xcf37cf37, + .led_ctrl3 = 0x0, + .open_drain = true, +}; + +/* QCA8337 GMAC0 is connected with QCA9558 over RGMII */ +static struct ar8327_pad_cfg jwap230_qca8337_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, + .mac06_exchange_dis = true, +}; + +/* QCA8337 GMAC6 is connected with QCA9558 over SGMII */ +static struct ar8327_pad_cfg jwap230_qca8337_pad6_cfg = { + .mode = AR8327_PAD_MAC_SGMII, + .sgmii_delay_en = true, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0, +}; + +static struct ar8327_platform_data jwap230_qca8337_data = { + .pad0_cfg = &jwap230_qca8337_pad0_cfg, + .pad6_cfg = &jwap230_qca8337_pad6_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .port6_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .led_cfg = &jwap230_qca8337_led_cfg, + .num_leds = ARRAY_SIZE(jwap230_leds_qca8337), + .leds = jwap230_leds_qca8337, +}; + +static struct mdio_board_info jwap230_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &jwap230_qca8337_data, + }, +}; + +static void __init jwap230_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(jwap230_leds_gpio), + jwap230_leds_gpio); + + mdiobus_register_board_info(jwap230_mdio0_info, + ARRAY_SIZE(jwap230_mdio0_info)); + ath79_register_mdio(0, 0x0); + + ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); + + /* QCA9558 GMAC0 is connected to RMGII interface */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0xa6000000; + + ath79_init_mac(ath79_eth0_data.mac_addr, art + JWAP230_MAC0_OFFSET, 0); + ath79_register_eth(0); + + /* QCA9558 GMAC1 is connected to SGMII interface */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_eth1_pll_data.pll_1000 = 0x03000101; + + ath79_init_mac(ath79_eth1_data.mac_addr, art + JWAP230_MAC1_OFFSET, 0); + ath79_register_eth(1); + + ath79_register_wmac(art + JWAP230_WMAC_CALDATA_OFFSET, NULL); + + ath79_register_pci(); + ath79_register_usb(); +} + +MIPS_MACHINE(ATH79_MACH_JWAP230, "JWAP230", "jjPlus JWAP230", jwap230_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 3425ce901b..7dd60acfff 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -94,6 +94,7 @@ enum ath79_mach_type { ATH79_MACH_JA76PF, /* jjPlus JA76PF */ ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */ ATH79_MACH_JWAP003, /* jjPlus JWAP003 */ + ATH79_MACH_JWAP230, /* jjPlus JWAP230 */ ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */ ATH79_MACH_MR12, /* Cisco Meraki MR12 */ ATH79_MACH_MR16, /* Cisco Meraki MR16 */ diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index bff3d263cc..cbb47f5fe2 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -268,6 +268,15 @@ define Device/gl-inet-6416A-v1 endef TARGET_DEVICES += gl-inet-6408A-v1 gl-inet-6416A-v1 +define Device/jwap230 + DEVICE_TITLE := jjPlus JWAP230 + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 + BOARDNAME = JWAP230 + IMAGE_SIZE = 16000k + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro +endef +TARGET_DEVICES += jwap230 + define Device/rnx-n360rt $(Device/tplink-4m) DEVICE_TITLE := Rosewill RNX-N360RT |