aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ar71xx')
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds8
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network11
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh5
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata2
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh9
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh3
-rw-r--r--target/linux/ar71xx/config-4.42
-rw-r--r--target/linux/ar71xx/config-4.92
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt22
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile2
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-e1700ac-v2.c145
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-e600g-v2.c184
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h3
-rw-r--r--target/linux/ar71xx/generic/config-default2
-rw-r--r--target/linux/ar71xx/image/generic.mk59
15 files changed, 453 insertions, 6 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 6711fb4ce9..725bab2c71 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -64,7 +64,9 @@ ap90q|\
cpe505n|\
cpe830|\
cpe870|\
-dr531)
+dr531|\
+e600g-v2|\
+e600gac-v2)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
@@ -342,6 +344,10 @@ dlan-pro-1200-ac)
ucidef_set_led_gpio "plcw" "dLAN" "devolo:status:dlan" "17" "0"
ucidef_set_led_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0"
;;
+e1700ac-v2)
+ ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
+ ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt"
+ ;;
esr900)
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "engenius:blue:wlan-2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "engenius:blue:wlan-5g" "phy1tpt"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index f131b3b633..0fe71e0760 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -355,6 +355,12 @@ ar71xx_setup_interfaces()
"0u@eth0" "2:lan" "3:lan" "4:lan"
ucidef_add_switch_attr "switch0" "enable" "false"
;;
+ e1700ac-v2|\
+ unifiac-pro|\
+ xd3200)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan" "3:wan"
+ ;;
ebr-2310-c1)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" \
@@ -493,11 +499,6 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:wan"
;;
- unifiac-pro|\
- xd3200)
- ucidef_add_switch "switch0" \
- "0@eth0" "2:lan" "3:wan"
- ;;
wndr3700|\
wndr3700v2|\
wndr3800|\
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 3b5fc32298..facc77ee60 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -23,6 +23,8 @@ get_status_led() {
antminer-s1|\
antminer-s3|\
antminer-r1|\
+ e1700ac-v2|\
+ e600gac-v2|\
eap120|\
minibox-v1|\
som9331|\
@@ -199,6 +201,9 @@ get_status_led() {
r36a)
status_led="$board:blue:status"
;;
+ e600g-v2)
+ status_led="$board:blue:system"
+ ;;
eap300v2)
status_led="engenius:blue:power"
;;
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 8284550e92..b0ada3b342 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -67,6 +67,8 @@ case "$FIRMWARE" in
cf-e380ac-v1|\
cf-e380ac-v2|\
dlan-pro-1200-ac|\
+ e1700ac-v2|\
+ e600gac-v2|\
sr3200|\
xd3200)
ath10kcal_extract "art" 20480 2116
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index f0742c1e7b..a9c6821ba8 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -627,9 +627,18 @@ ar71xx_board_detect() {
*"DW33D")
name="dw33d"
;;
+ *"E1700AC v2")
+ name="e1700ac-v2"
+ ;;
*"E2100L")
name="e2100l"
;;
+ *"E600G v2")
+ name="e600g-v2"
+ ;;
+ *"E600GAC v2")
+ name="e600gac-v2"
+ ;;
*"EAP120")
name="eap120"
tplink_pharos_board_detect
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 88d0f2970a..614692d663 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -233,6 +233,9 @@ platform_check_image() {
dr342|\
dr531|\
dragino2|\
+ e1700ac-v2|\
+ e600g-v2|\
+ e600gac-v2|\
ebr-2310-c1|\
ens202ext|\
epg5000|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 068b83ce8a..ec398a7071 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -99,7 +99,9 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_DR344 is not set
# CONFIG_ATH79_MACH_DR531 is not set
# CONFIG_ATH79_MACH_DRAGINO2 is not set
+# CONFIG_ATH79_MACH_E1700AC_V2 is not set
# CONFIG_ATH79_MACH_E2100L is not set
+# CONFIG_ATH79_MACH_E600G_V2 is not set
# CONFIG_ATH79_MACH_EAP120 is not set
# CONFIG_ATH79_MACH_EAP300V2 is not set
# CONFIG_ATH79_MACH_EAP7660D is not set
diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9
index e495f6b4c2..924f17cd71 100644
--- a/target/linux/ar71xx/config-4.9
+++ b/target/linux/ar71xx/config-4.9
@@ -97,7 +97,9 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_DR344 is not set
# CONFIG_ATH79_MACH_DR531 is not set
# CONFIG_ATH79_MACH_DRAGINO2 is not set
+# CONFIG_ATH79_MACH_E1700AC_V2 is not set
# CONFIG_ATH79_MACH_E2100L is not set
+# CONFIG_ATH79_MACH_E600G_V2 is not set
# CONFIG_ATH79_MACH_EAP120 is not set
# CONFIG_ATH79_MACH_EAP300V2 is not set
# CONFIG_ATH79_MACH_EAP7660D is not set
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index fca5d01b3a..ad4e2a23c6 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -689,6 +689,17 @@ config ATH79_MACH_DRAGINO2
select ATH79_DEV_ETH
select ATH79_DEV_USB
+config ATH79_MACH_E1700AC_V2
+ bool "WHQX E1700AC v2 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_E2100L
bool "Linksys E2100L board support"
select SOC_AR913X
@@ -700,6 +711,17 @@ config ATH79_MACH_E2100L
select ATH79_DEV_WMAC
select ATH79_NVRAM
+config ATH79_MACH_E600G_V2
+ bool "WHQX E600G/E600GAC v2 support"
+ select SOC_QCA953X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_ESR900
bool "EnGenius ESR900 board support"
select SOC_QCA955X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 98d4677a5f..d489b1a59a 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -108,6 +108,8 @@ obj-$(CONFIG_ATH79_MACH_DR342) += mach-dr344.o
obj-$(CONFIG_ATH79_MACH_DR344) += mach-dr344.o
obj-$(CONFIG_ATH79_MACH_DR531) += mach-dr531.o
obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o
+obj-$(CONFIG_ATH79_MACH_E1700AC_V2) += mach-e1700ac-v2.o
+obj-$(CONFIG_ATH79_MACH_E600G_V2) += mach-e600g-v2.o
obj-$(CONFIG_ATH79_MACH_EAP120) += mach-eap120.o
obj-$(CONFIG_ATH79_MACH_EAP300V2) += mach-eap300v2.o
obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-e1700ac-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-e1700ac-v2.c
new file mode 100644
index 0000000000..584fd51984
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-e1700ac-v2.c
@@ -0,0 +1,145 @@
+/*
+ * WHQX E1700AC v2 board support
+ *
+ * Copyright (C) 2017 Peng Zhang <sd20@qxwlan.com>
+ * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define E1700AC_V2_GPIO_LED_SYS 1
+#define E1700AC_V2_GPIO_LED_USB 7
+#define E1700AC_V2_GPIO_LED_WLAN2G 19
+
+#define E1700AC_V2_GPIO_BTN_SW1 2
+#define E1700AC_V2_GPIO_BTN_RESET 11
+
+#define E1700AC_V2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define E1700AC_V2_KEYS_DEBOUNCE_INTERVAL \
+ (3 * E1700AC_V2_KEYS_POLL_INTERVAL)
+
+static struct gpio_led e1700ac_v2_leds_gpio[] __initdata = {
+ {
+ .name = "e1700ac-v2:green:system",
+ .gpio = E1700AC_V2_GPIO_LED_SYS,
+ .active_low = 1,
+ }, {
+ .name = "e1700ac-v2:green:usb",
+ .gpio = E1700AC_V2_GPIO_LED_USB,
+ .active_low = 1,
+ }, {
+ .name = "e1700ac-v2:green:wlan2g",
+ .gpio = E1700AC_V2_GPIO_LED_WLAN2G,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button e1700ac_v2_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = E1700AC_V2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = E1700AC_V2_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "sw1",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = E1700AC_V2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = E1700AC_V2_GPIO_BTN_SW1,
+ .active_low = 1,
+ },
+};
+
+static const struct ar8327_led_info e1700ac_v2_leds_qca8334[] = {
+ AR8327_LED_INFO(PHY1_0, HW, "e1700ac-v2:green:lan"),
+ AR8327_LED_INFO(PHY2_0, HW, "e1700ac-v2:green:wan"),
+};
+
+/* Blink rate: 1 Gbps -> 8 hz, 100 Mbs -> 4 Hz, 10 Mbps -> 2 Hz */
+static struct ar8327_led_cfg e1700ac_v2_qca8334_led_cfg = {
+ .led_ctrl0 = 0xcf37cf37,
+ .led_ctrl1 = 0xcf37cf37,
+ .led_ctrl2 = 0xcf37cf37,
+ .led_ctrl3 = 0x0,
+ .open_drain = true,
+};
+
+static struct ar8327_pad_cfg e1700ac_v2_qca8334_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_SGMII,
+ .sgmii_delay_en = true,
+};
+
+static struct ar8327_platform_data e1700ac_v2_qca8334_data = {
+ .pad0_cfg = &e1700ac_v2_qca8334_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &e1700ac_v2_qca8334_led_cfg,
+ .leds = e1700ac_v2_leds_qca8334,
+ .num_leds = ARRAY_SIZE(e1700ac_v2_leds_qca8334),
+};
+
+static struct mdio_board_info e1700ac_v2_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &e1700ac_v2_qca8334_data,
+ },
+};
+
+static void __init e1700ac_v2_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f050400);
+ u8 *art = (u8 *) KSEG1ADDR(0x1f061000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(e1700ac_v2_leds_gpio),
+ e1700ac_v2_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, E1700AC_V2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(e1700ac_v2_gpio_keys),
+ e1700ac_v2_gpio_keys);
+
+ ath79_register_mdio(0, 0x0);
+ mdiobus_register_board_info(e1700ac_v2_mdio0_info,
+ ARRAY_SIZE(e1700ac_v2_mdio0_info));
+
+ /* GMAC0 is connected to QCA8334 switch */
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_pll_data.pll_1000 = 0x03000101;
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_register_eth(0);
+
+ ath79_register_pci();
+ ath79_register_usb();
+ ath79_register_wmac(art, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_E1700AC_V2, "E1700AC-V2", "WHQX E1700AC v2",
+ e1700ac_v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-e600g-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-e600g-v2.c
new file mode 100644
index 0000000000..9838c304b9
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-e600g-v2.c
@@ -0,0 +1,184 @@
+/*
+ * WHQX E600G/E600GAC v2 board support
+ *
+ * Copyright (C) 2017 Peng Zhang <sd20@qxwlan.com>
+ * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define E600G_V2_GPIO_LED_LAN 16
+#define E600G_V2_GPIO_LED_SYS 13
+#define E600G_V2_GPIO_LED_WAN_B 4
+#define E600G_V2_GPIO_LED_WAN_G 15
+
+#define E600GAC_V2_GPIO_LED_CTRL_B 14
+#define E600GAC_V2_GPIO_LED_CTRL_G 11
+#define E600GAC_V2_GPIO_LED_CTRL_R 12
+#define E600GAC_V2_GPIO_LED_LAN 16
+#define E600GAC_V2_GPIO_LED_SYS 13
+#define E600GAC_V2_GPIO_LED_WAN_G 15
+#define E600GAC_V2_GPIO_LED_WAN_O 4
+
+#define E600G_V2_GPIO_BTN_RESET 17
+#define E600GAC_V2_GPIO_BTN_WPS 1
+
+#define E600G_V2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define E600G_V2_KEYS_DEBOUNCE_INTERVAL (3 * E600G_V2_KEYS_POLL_INTERVAL)
+
+static struct gpio_led e600g_v2_leds_gpio[] __initdata = {
+ {
+ .name = "e600g-v2:blue:system",
+ .gpio = E600G_V2_GPIO_LED_SYS,
+ .active_low = 1,
+ }, {
+ .name = "e600g-v2:blue:wan",
+ .gpio = E600G_V2_GPIO_LED_WAN_B,
+ .active_low = 1,
+ }, {
+ .name = "e600g-v2:green:lan",
+ .gpio = E600G_V2_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "e600g-v2:green:wan",
+ .gpio = E600G_V2_GPIO_LED_WAN_G,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led e600gac_v2_leds_gpio[] __initdata = {
+ {
+ .name = "e600gac-v2:blue:control",
+ .gpio = E600GAC_V2_GPIO_LED_CTRL_B,
+ .active_low = 1,
+ }, {
+ .name = "e600gac-v2:green:control",
+ .gpio = E600GAC_V2_GPIO_LED_CTRL_G,
+ .active_low = 1,
+ }, {
+ .name = "e600gac-v2:red:control",
+ .gpio = E600GAC_V2_GPIO_LED_CTRL_R,
+ .active_low = 1,
+ }, {
+ .name = "e600gac-v2:green:system",
+ .gpio = E600GAC_V2_GPIO_LED_SYS,
+ .active_low = 1,
+ }, {
+ .name = "e600gac-v2:orange:wan",
+ .gpio = E600GAC_V2_GPIO_LED_WAN_O,
+ .active_low = 1,
+ }, {
+ .name = "e600gac-v2:green:lan",
+ .gpio = E600GAC_V2_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "e600gac-v2:green:wan",
+ .gpio = E600GAC_V2_GPIO_LED_WAN_G,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button e600g_v2_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = E600G_V2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = E600G_V2_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button e600gac_v2_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = E600G_V2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = E600G_V2_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = E600G_V2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = E600GAC_V2_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+};
+
+static void __init e600g_v2_common_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f050400);
+ u8 *art = (u8 *) KSEG1ADDR(0x1f061000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = 0xfe;
+
+ /* LAN */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_register_eth(0);
+
+ /* WAN */
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.phy_mask = BIT(0);
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_register_eth(1);
+
+ ath79_register_pci();
+ ath79_register_usb();
+ ath79_register_wmac(art, NULL);
+}
+
+static void __init e600g_v2_setup(void)
+{
+ e600g_v2_common_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(e600g_v2_leds_gpio),
+ e600g_v2_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, E600G_V2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(e600g_v2_gpio_keys),
+ e600g_v2_gpio_keys);
+}
+
+static void __init e600gac_v2_setup(void)
+{
+ e600g_v2_common_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(e600gac_v2_leds_gpio),
+ e600gac_v2_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, E600G_V2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(e600gac_v2_gpio_keys),
+ e600gac_v2_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_E600G_V2, "E600G-V2", "WHQX E600G v2",
+ e600g_v2_setup);
+
+MIPS_MACHINE(ATH79_MACH_E600GAC_V2, "E600GAC-V2", "WHQX E600GAC v2",
+ e600gac_v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 497d794e01..e22ebd06f8 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -98,6 +98,9 @@ enum ath79_mach_type {
ATH79_MACH_DR344, /* Wallys DR344 */
ATH79_MACH_DR531, /* Wallys DR531 */
ATH79_MACH_DRAGINO2, /* Dragino Version 2 */
+ ATH79_MACH_E1700AC_V2, /* WHQX E1700AC v2 */
+ ATH79_MACH_E600G_V2, /* WHQX E600G v2 */
+ ATH79_MACH_E600GAC_V2, /* WHQX E600GAC v2 */
ATH79_MACH_EAP120, /* TP-LINK EAP120 */
ATH79_MACH_EAP300V2, /* EnGenius EAP300 v2 */
ATH79_MACH_EAP7660D, /* Senao EAP7660D */
diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default
index 9caf29aa5f..2e5eb66e08 100644
--- a/target/linux/ar71xx/generic/config-default
+++ b/target/linux/ar71xx/generic/config-default
@@ -70,7 +70,9 @@ CONFIG_ATH79_MACH_DR342=y
CONFIG_ATH79_MACH_DR344=y
CONFIG_ATH79_MACH_DR531=y
CONFIG_ATH79_MACH_DRAGINO2=y
+CONFIG_ATH79_MACH_E1700AC_V2=y
CONFIG_ATH79_MACH_E2100L=y
+CONFIG_ATH79_MACH_E600G_V2=y
CONFIG_ATH79_MACH_EAP120=y
CONFIG_ATH79_MACH_EAP300V2=y
CONFIG_ATH79_MACH_EAP7660D=y
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index eeefde0a98..beb56bde7a 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -281,6 +281,65 @@ define Device/dragino2
endef
TARGET_DEVICES += dragino2
+define Device/e1700ac-v2-16M
+ DEVICE_TITLE := WHQX E1700AC v2 (16MB flash)
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x kmod-usb-core \
+ kmod-usb2 kmod-usb-ledtrig-usbport
+ BOARDNAME := E1700AC-V2
+ SUPPORTED_DEVICES := e1700ac-v2
+ IMAGE_SIZE := 15936k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art)ro,-(firmware)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += e1700ac-v2-16M
+
+define Device/e1700ac-v2-8M
+ $(Device/e1700ac-v2-16M)
+ DEVICE_TITLE := WHQX E1700AC v2 (8MB flash)
+ IMAGE_SIZE := 7744k
+endef
+TARGET_DEVICES += e1700ac-v2-8M
+
+define Device/e600g-v2-16M
+ DEVICE_TITLE := WHQX E600G v2 (16MB flash)
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig
+ BOARDNAME := E600G-V2
+ SUPPORTED_DEVICES := e600g-v2
+ IMAGE_SIZE := 15936k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art)ro,-(firmware)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += e600g-v2-16M
+
+define Device/e600g-v2-8M
+ $(Device/e600g-v2-16M)
+ DEVICE_TITLE := WHQX E600G v2 (8MB flash)
+ IMAGE_SIZE := 7744k
+endef
+TARGET_DEVICES += e600g-v2-8M
+
+define Device/e600gac-v2-16M
+ DEVICE_TITLE := WHQX E600GAC v2 (16MB flash)
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887 kmod-usb-core \
+ kmod-usb2 -swconfig
+ BOARDNAME := E600GAC-V2
+ SUPPORTED_DEVICES := e600gac-v2
+ IMAGE_SIZE := 15936k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art)ro,-(firmware)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += e600gac-v2-16M
+
+define Device/e600gac-v2-8M
+ $(Device/e600gac-v2-16M)
+ DEVICE_TITLE := WHQX E600GAC v2 (8MB flash)
+ IMAGE_SIZE := 7744k
+endef
+TARGET_DEVICES += e600gac-v2-8M
+
define Device/ew-balin
DEVICE_TITLE := Embedded Wireless Balin Platform
DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea