aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ar71xx')
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh1
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-4.91
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt9
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c177
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/generic/config-default1
-rw-r--r--target/linux/ar71xx/image/generic.mk10
13 files changed, 212 insertions, 1 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index aec7741489..2de8472e27 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -377,6 +377,10 @@ fritz4020)
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
;;
+fritz450e)
+ ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
+ ;;
gl-ar300m)
ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
;;
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 0c6a055d93..006f27288f 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -80,6 +80,7 @@ ar71xx_setup_interfaces()
eap7660d|\
el-mini|\
fritz300e|\
+ fritz450e|\
gl-usb150|\
hiveap-121|\
koala|\
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index f1f4980532..29fd244ab5 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -68,6 +68,7 @@ get_status_led() {
archer-c7-v4|\
fritz300e|\
fritz4020|\
+ fritz450e|\
gl-usb150|\
mr12|\
mr16|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 6eb946468d..94bce7d335 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -75,7 +75,8 @@ case "$FIRMWARE" in
ath9k_eeprom_extract "art" 4096 2048
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0) +1)
;;
- fritz4020)
+ fritz4020|\
+ fritz450e)
ath9k_eeprom_extract_reverse "urlader" 5441 1088
;;
mr18)
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index de058c90be..06660d1037 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -715,6 +715,9 @@ ar71xx_board_detect() {
*"FRITZ!WLAN Repeater 300E")
name="fritz300e"
;;
+ *"FRITZ!WLAN Repeater 450E")
+ name="fritz450e"
+ ;;
*"GL-AR150")
name="gl-ar150"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 4b038b726c..1b6580cdab 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -688,6 +688,7 @@ platform_check_image() {
# these boards use metadata images
fritz300e|\
fritz4020|\
+ fritz450e|\
koala|\
rb-750-r2|\
rb-750p-pbr2|\
diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9
index 9f9d4dedc7..ca976677f0 100644
--- a/target/linux/ar71xx/config-4.9
+++ b/target/linux/ar71xx/config-4.9
@@ -116,6 +116,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_F9K1115V2 is not set
# CONFIG_ATH79_MACH_FRITZ300E is not set
# CONFIG_ATH79_MACH_FRITZ4020 is not set
+# CONFIG_ATH79_MACH_FRITZ450E is not set
# CONFIG_ATH79_MACH_GL_AR150 is not set
# CONFIG_ATH79_MACH_GL_AR300 is not set
# CONFIG_ATH79_MACH_GL_AR300M is not set
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 5ea7a6f532..bf9d87b3b9 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -2376,3 +2376,12 @@ config ATH79_MACH_FRITZ4020
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_USB
select ATH79_DEV_M25P80
+
+config ATH79_MACH_FRITZ450E
+ bool "AVM FRITZ!WLAN Repeater 450E support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 17529499ac..a8e2aa82f5 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -126,6 +126,7 @@ obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o
obj-$(CONFIG_ATH79_MACH_FRITZ300E) += mach-fritz300e.o
obj-$(CONFIG_ATH79_MACH_FRITZ4020) += mach-fritz4020.o
+obj-$(CONFIG_ATH79_MACH_FRITZ450E) += mach-fritz450e.o
obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o
obj-$(CONFIG_ATH79_MACH_GL_AR300) += mach-gl-ar300.o
obj-$(CONFIG_ATH79_MACH_GL_AR300M) += mach-gl-ar300m.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c
new file mode 100644
index 0000000000..ee0a185304
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c
@@ -0,0 +1,177 @@
+/*
+ * AVM FRITZ!WLAN Repeater 450E board support
+ *
+ * Copyright (C) 2018 David Bauer <mail@david-bauer.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/ath9k_platform.h>
+#include <linux/etherdevice.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_data/mdio-gpio.h>
+#include <linux/platform_data/phy-at803x.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/74x164.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define FRITZ450E_GPIO_LED_POWER 14
+#define FRITZ450E_GPIO_LED_LAN 13
+#define FRITZ450E_GPIO_LED_WLAN 15
+#define FRITZ450E_GPIO_LED_RSSI2 16
+#define FRITZ450E_GPIO_LED_RSSI3 17
+#define FRITZ450E_GPIO_LED_RSSI4 18
+
+#define FRITZ450E_GPIO_BTN_WPS 4
+#define FRITZ450E_KEYS_POLL_INTERVAL 20 /* msecs */
+#define FRITZ450E_KEYS_DEBOUNCE_INTERVAL (3 * FRITZ450E_KEYS_POLL_INTERVAL)
+
+#define FRITZ450E_PHY_ADDRESS 0
+#define FRITZ450E_GPIO_PHY_RESET 11
+#define FRITZ450E_GPIO_MDIO_CLK 12
+#define FRITZ450E_GPIO_MDIO_DATA 19
+
+#define FRITZ450E_OFFSET_URLADER_WIFI_MAC_REVERSE 0x1979
+
+
+static struct mtd_partition fritz450E_flash_partitions[] = {
+ {
+ .name = "urlader",
+ .offset = 0,
+ .size = 0x0020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x0020000,
+ .size = 0x0EE0000,
+ }, {
+ .name = "tffs (1)",
+ .offset = 0x0f00000,
+ .size = 0x0080000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "tffs (2)",
+ .offset = 0x0f80000,
+ .size = 0x0080000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct flash_platform_data fritz450E_flash_data = {
+ .parts = fritz450E_flash_partitions,
+ .nr_parts = ARRAY_SIZE(fritz450E_flash_partitions),
+};
+
+static struct gpio_led fritz450E_leds_gpio[] __initdata = {
+ {
+ .name = "fritz450e:green:lan",
+ .gpio = FRITZ450E_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "fritz450e:green:rssi2",
+ .gpio = FRITZ450E_GPIO_LED_RSSI2,
+ .active_low = 1,
+ }, {
+ .name = "fritz450e:green:rssi3",
+ .gpio = FRITZ450E_GPIO_LED_RSSI3,
+ .active_low = 1,
+ }, {
+ .name = "fritz450e:green:rssi4",
+ .gpio = FRITZ450E_GPIO_LED_RSSI4,
+ .active_low = 1,
+ }, {
+ .name = "fritz450e:green:wlan",
+ .gpio = FRITZ450E_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "fritz450e:green:power",
+ .gpio = FRITZ450E_GPIO_LED_POWER,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button fritz450E_gpio_keys[] __initdata = {
+ {
+ .desc = "WPS Button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = FRITZ450E_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = FRITZ450E_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct at803x_platform_data fritz450E_at803x_data = {
+ .disable_smarteee = 1,
+ .has_reset_gpio = 1,
+ .reset_gpio = FRITZ450E_GPIO_PHY_RESET,
+};
+
+static struct mdio_board_info fritz450E_mdio_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.1",
+ .phy_addr = FRITZ450E_PHY_ADDRESS,
+ .platform_data = &fritz450E_at803x_data,
+ },
+};
+
+static void __init fritz450E_setup(void) {
+ u8 *urlader = (u8 *) KSEG1ADDR(0x1f000000);
+ u8 wifi_mac[ETH_ALEN];
+
+ ath79_register_m25p80(&fritz450E_flash_data);
+
+ gpio_request_one(FRITZ450E_GPIO_MDIO_CLK, GPIOF_OUT_INIT_HIGH, "MDC Pull-UP");
+ gpio_request_one(FRITZ450E_GPIO_MDIO_DATA, GPIOF_OUT_INIT_HIGH, "MDIO Pull-UP");
+ gpio_request_one(FRITZ450E_GPIO_PHY_RESET, GPIOF_OUT_INIT_HIGH, "PHY reset");
+
+ /* Register PHY device */
+ mdiobus_register_board_info(fritz450E_mdio_info,
+ ARRAY_SIZE(fritz450E_mdio_info));
+
+ /* Initialize Ethernet */
+ ath79_extract_mac_reverse(urlader + FRITZ450E_OFFSET_URLADER_WIFI_MAC_REVERSE, wifi_mac);
+ ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, -2);
+
+ ath79_register_mdio(1, ~BIT(FRITZ450E_PHY_ADDRESS));
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth0_data.phy_mask = BIT(FRITZ450E_PHY_ADDRESS);
+ ath79_eth0_pll_data.pll_1000 = 0x03000000;
+ ath79_eth0_pll_data.pll_100 = 0x00000101;
+ ath79_eth0_pll_data.pll_10 = 0x00001313;
+ ath79_register_eth(0);
+
+ /* Initialize 2.4GHz WiFi */
+ ath79_register_wmac_simple();
+
+ /* Register GPIO buttons */
+ ath79_register_gpio_keys_polled(-1, FRITZ450E_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(fritz450E_gpio_keys),
+ fritz450E_gpio_keys);
+
+ /* Register LEDs */
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(fritz450E_leds_gpio),
+ fritz450E_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_FRITZ450E, "FRITZ450E",
+ "AVM FRITZ!WLAN Repeater 450E", fritz450E_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 5f2244d209..3908e0dadc 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -121,6 +121,7 @@ enum ath79_mach_type {
ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */
ATH79_MACH_FRITZ300E, /* AVM FRITZ!WLAN Repeater 300E */
ATH79_MACH_FRITZ4020, /* AVM FRITZ!Box 4020 */
+ ATH79_MACH_FRITZ450E, /* AVM FRITZ!WLAN Repeater 450E */
ATH79_MACH_GL_AR150, /* GL-AR150 support */
ATH79_MACH_GL_AR300, /* GL-AR300 */
ATH79_MACH_GL_AR300M, /* GL-AR300M */
diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default
index 0051048e30..a857844f33 100644
--- a/target/linux/ar71xx/generic/config-default
+++ b/target/linux/ar71xx/generic/config-default
@@ -89,6 +89,7 @@ CONFIG_ATH79_MACH_EW_DORIN=y
CONFIG_ATH79_MACH_F9K1115V2=y
CONFIG_ATH79_MACH_FRITZ300E=y
CONFIG_ATH79_MACH_FRITZ4020=y
+CONFIG_ATH79_MACH_FRITZ450E=y
CONFIG_ATH79_MACH_GL_AR150=y
CONFIG_ATH79_MACH_GL_AR300=y
CONFIG_ATH79_MACH_GL_AR300M=y
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index a49b0d655d..c74ca130b6 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -1321,3 +1321,13 @@ define Device/fritz4020
IMAGE_SIZE := 15232k
endef
TARGET_DEVICES += fritz4020
+
+define Device/fritz450e
+ $(call Device/AVM)
+ DEVICE_TITLE := AVM FRITZ!WLAN Repeater 450E
+ DEVICE_PACKAGES += -swconfig
+ BOARDNAME := FRITZ450E
+ SUPPORTED_DEVICES := fritz450e
+ IMAGE_SIZE := 15232k
+endef
+TARGET_DEVICES += fritz450e