diff options
Diffstat (limited to 'target/linux/ar71xx')
-rw-r--r-- | target/linux/ar71xx/config-4.1 | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 11 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c | 176 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/mikrotik/config-default | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/nand/config-default | 1 |
7 files changed, 192 insertions, 0 deletions
diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1 index 25c5ad532c..8da23db0b6 100644 --- a/target/linux/ar71xx/config-4.1 +++ b/target/linux/ar71xx/config-4.1 @@ -56,6 +56,7 @@ CONFIG_ATH79_MACH_CARAMBOLA2=y CONFIG_ATH79_MACH_CF_E316N_V2=y CONFIG_ATH79_MACH_CPE510=y CONFIG_ATH79_MACH_CR3000=y +CONFIG_ATH79_MACH_CR5000=y CONFIG_ATH79_MACH_DB120=y CONFIG_ATH79_MACH_DGL_5500_A1=y CONFIG_ATH79_MACH_DHP_1565_A1=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 815c0ebae9..9cf7a0b317 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -933,6 +933,17 @@ config ATH79_MACH_CR3000 select ATH79_DEV_M25P80 select ATH79_DEV_WMAC +config ATH79_MACH_CR5000 + bool "PowerCloud CR5000 support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_MR1750 bool "OpenMesh MR1750 board support" select SOC_QCA955X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 082828f60e..6800bfd3ac 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -64,6 +64,7 @@ obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o obj-$(CONFIG_ATH79_MACH_CR3000) += mach-cr3000.o +obj-$(CONFIG_ATH79_MACH_CR5000) += mach-cr5000.o obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o obj-$(CONFIG_ATH79_MACH_DLAN_HOTSPOT) += mach-dlan-hotspot.o obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP) += mach-dlan-pro-500-wp.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c new file mode 100644 index 0000000000..f393ed1113 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c @@ -0,0 +1,176 @@ +/* + * PowerCloud CR5000 support + * + * Copyright (c) 2011 Qualcomm Atheros + * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (c) 2012-2013 PowerCloud Systems + * Copyright (c) 2015 Daniel Dickinson <openwrt@daniel.thecshore.com> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include <linux/gpio.h> +#include <linux/pci.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/ath9k_platform.h> +#include <linux/ar8216_platform.h> + +#include <asm/mach-ath79/ar71xx_regs.h> +#include <asm/mach-ath79/ath79.h> + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define CR5000_GPIO_LED_WLAN_2G 14 +#define CR5000_GPIO_LED_WPS 12 +#define CR5000_GPIO_LED_POWER_AMBER 4 +/* GPIO2 has to have JTAG disabled as it is also to + * power led + */ +#define CR5000_GPIO_LED_POWER_ENABLE 2 +#define CR5000_GPIO_BTN_WPS 16 +#define CR5000_GPIO_BTN_RESET 17 + +#define CR5000_KEYS_POLL_INTERVAL 20 /* msecs */ +#define CR5000_KEYS_DEBOUNCE_INTERVAL (3 * CR5000_KEYS_POLL_INTERVAL) + +#define CR5000_MAC0_OFFSET 0 +#define CR5000_WMAC_CALDATA_OFFSET 0x1000 +#define CR5000_WMAC_MAC_OFFSET 0x1002 +#define CR5000_PCIE_CALDATA_OFFSET 0x5000 +#define CR5000_PCIE_MAC_OFFSET 0x5002 + +static struct gpio_led cr5000_leds_gpio[] __initdata = { + { + .name = "pcs:amber:power", + .gpio = CR5000_GPIO_LED_POWER_AMBER, + .active_low = 1, + }, + { + .name = "pcs:white:wps", + .gpio = CR5000_GPIO_LED_WPS, + .active_low = 1, + }, + { + .name = "pcs:blue:wlan", + .gpio = CR5000_GPIO_LED_WLAN_2G, + .active_low = 1, + }, +}; + +static struct gpio_keys_button cr5000_gpio_keys[] __initdata = { + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = CR5000_KEYS_DEBOUNCE_INTERVAL, + .gpio = CR5000_GPIO_BTN_WPS, + .active_low = 1, + }, + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = CR5000_KEYS_DEBOUNCE_INTERVAL, + .gpio = CR5000_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + +static struct ar8327_pad_cfg cr5000_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct ar8327_led_cfg cr5000_ar8327_led_cfg = { + .led_ctrl0 = 0x00000000, + .led_ctrl1 = 0xc737c737, + .led_ctrl2 = 0x00000000, + .led_ctrl3 = 0x00c30c00, + .open_drain = true, +}; + +static struct ar8327_platform_data cr5000_ar8327_data = { + .pad0_cfg = &cr5000_ar8327_pad0_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .led_cfg = &cr5000_ar8327_led_cfg, +}; + +static struct mdio_board_info cr5000_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &cr5000_ar8327_data, + }, +}; + +static void __init cr5000_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); + gpio_request_one(CR5000_GPIO_LED_POWER_ENABLE, + GPIOF_OUT_INIT_LOW, "Power LED enable"); + ath79_gpio_output_select(CR5000_GPIO_LED_POWER_AMBER, AR934X_GPIO_OUT_GPIO); + ath79_gpio_output_select(CR5000_GPIO_LED_WLAN_2G, AR934X_GPIO_OUT_GPIO); + ath79_gpio_output_select(CR5000_GPIO_LED_WPS, AR934X_GPIO_OUT_GPIO); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(cr5000_leds_gpio), + cr5000_leds_gpio); + ath79_register_gpio_keys_polled(-1, CR5000_KEYS_POLL_INTERVAL, + ARRAY_SIZE(cr5000_gpio_keys), + cr5000_gpio_keys); + ath79_register_usb(); + ath79_register_wmac(art + CR5000_WMAC_CALDATA_OFFSET, art + CR5000_WMAC_MAC_OFFSET); + ap94_pci_init(NULL, NULL, NULL, art + CR5000_PCIE_MAC_OFFSET); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); + + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, art + CR5000_MAC0_OFFSET, 0); + + mdiobus_register_board_info(cr5000_mdio0_info, + ARRAY_SIZE(cr5000_mdio0_info)); + + /* GMAC0 is connected to an AR8327 switch */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x06000000; + ath79_register_eth(0); +} + +MIPS_MACHINE(ATH79_MACH_CR5000, "CR5000", "PowerCloud CR5000", + cr5000_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 010e4b3d56..fd22505565 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -48,6 +48,7 @@ enum ath79_mach_type { ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */ ATH79_MACH_CPE510, /* TP-LINK CPE510 */ ATH79_MACH_CR3000, /* PowerCloud CR3000 */ + ATH79_MACH_CR5000, /* PowerCloud CR5000 */ ATH79_MACH_DB120, /* Atheros DB120 reference board */ ATH79_MACH_PB44, /* Atheros PB44 reference board */ ATH79_MACH_DGL_5500_A1, /* D-link DGL-5500 rev. A1 */ diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default index d541c0f0c0..88ac6cf229 100644 --- a/target/linux/ar71xx/mikrotik/config-default +++ b/target/linux/ar71xx/mikrotik/config-default @@ -20,6 +20,7 @@ # CONFIG_ATH79_MACH_CARAMBOLA2 is not set # CONFIG_ATH79_MACH_CPE510 is not set # CONFIG_ATH79_MACH_CR3000 is not set +# CONFIG_ATH79_MACH_CR5000 is not set # CONFIG_ATH79_MACH_DB120 is not set # CONFIG_ATH79_MACH_DGL_5500_A1 is not set # CONFIG_ATH79_MACH_DHP_1565_A1 is not set diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default index b85923baa0..e67d1adce2 100644 --- a/target/linux/ar71xx/nand/config-default +++ b/target/linux/ar71xx/nand/config-default @@ -17,6 +17,7 @@ # CONFIG_ATH79_MACH_CAP4200AG is not set # CONFIG_ATH79_MACH_CARAMBOLA2 is not set # CONFIG_ATH79_MACH_CR3000 is not set +# CONFIG_ATH79_MACH_CR5000 is not set # CONFIG_ATH79_MACH_DB120 is not set # CONFIG_ATH79_MACH_DIR_505_A1 is not set # CONFIG_ATH79_MACH_DIR_600_A1 is not set |