1 files changed, 0 insertions, 184 deletions
diff --git a/target/linux/ar71xx/patches-3.3/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-3.3/609-MIPS-ath79-ap136-fixes.patch
deleted file mode 100644
index b378888bfd..0000000000
--- a/target/linux/ar71xx/patches-3.3/609-MIPS-ath79-ap136-fixes.patch
+++ /dev/null
@@ -1,184 +0,0 @@
---- a/arch/mips/ath79/mach-ap136.c
-+++ b/arch/mips/ath79/mach-ap136.c
-@@ -1,5 +1,5 @@
- /*
-- * Qualcomm Atheros AP136 reference board support
-+ * Atheros AP136 reference board support
-  *
-  * Copyright (c) 2012 Qualcomm Atheros
-  * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
-@@ -18,23 +18,27 @@
-  *
-  */
- 
--#include <linux/pci.h>
--#include <linux/ath9k_platform.h>
-+#include <linux/platform_device.h>
-+#include <linux/ar8216_platform.h>
- 
--#include "machtypes.h"
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#include "common.h"
-+#include "dev-ap9x-pci.h"
- #include "dev-gpio-buttons.h"
-+#include "dev-eth.h"
- #include "dev-leds-gpio.h"
--#include "dev-spi.h"
-+#include "dev-m25p80.h"
- #include "dev-usb.h"
- #include "dev-wmac.h"
--#include "pci.h"
-+#include "machtypes.h"
- 
--#define AP136_GPIO_LED_STATUS_RED	14
--#define AP136_GPIO_LED_STATUS_GREEN	19
- #define AP136_GPIO_LED_USB		4
--#define AP136_GPIO_LED_WLAN_2G		13
- #define AP136_GPIO_LED_WLAN_5G		12
-+#define AP136_GPIO_LED_WLAN_2G		13
-+#define AP136_GPIO_LED_STATUS_RED	14
- #define AP136_GPIO_LED_WPS_RED		15
-+#define AP136_GPIO_LED_STATUS_GREEN	19
- #define AP136_GPIO_LED_WPS_GREEN	20
- 
- #define AP136_GPIO_BTN_WPS		16
-@@ -43,8 +47,10 @@
- #define AP136_KEYS_POLL_INTERVAL	20	/* msecs */
- #define AP136_KEYS_DEBOUNCE_INTERVAL	(3 * AP136_KEYS_POLL_INTERVAL)
- 
--#define AP136_WMAC_CALDATA_OFFSET 0x1000
--#define AP136_PCIE_CALDATA_OFFSET 0x5000
-+#define AP136_MAC0_OFFSET		0
-+#define AP136_MAC1_OFFSET		6
-+#define AP136_WMAC_CALDATA_OFFSET	0x1000
-+#define AP136_PCIE_CALDATA_OFFSET	0x5000
- 
- static struct gpio_led ap136_leds_gpio[] __initdata = {
- 	{
-@@ -98,63 +104,91 @@ static struct gpio_keys_button ap136_gpi
- 	},
- };
- 
--static struct ath79_spi_controller_data ap136_spi0_data = {
--	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
--	.cs_line = 0,
-+static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg = {
-+	.mode = AR8327_PAD_MAC_RGMII,
-+	.txclk_delay_en = true,
-+	.rxclk_delay_en = true,
-+	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
-+	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
- };
- 
--static struct spi_board_info ap136_spi_info[] = {
--	{
--		.bus_num	= 0,
--		.chip_select	= 0,
--		.max_speed_hz	= 25000000,
--		.modalias	= "mx25l6405d",
--		.controller_data = &ap136_spi0_data,
--	}
-+static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg = {
-+	.mode = AR8327_PAD_MAC_SGMII,
-+	.txclk_delay_en = false,
-+	.rxclk_delay_en = true,
-+	.txclk_delay_sel = AR8327_CLK_DELAY_SEL0,
-+	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
- };
- 
--static struct ath79_spi_platform_data ap136_spi_data = {
--	.bus_num	= 0,
--	.num_chipselect	= 1,
-+static struct ar8327_platform_data ap136_ar8327_data = {
-+	.pad0_cfg = &ap136_ar8327_pad0_cfg,
-+	.pad6_cfg = &ap136_ar8327_pad6_cfg,
-+	.cpuport_cfg = {
-+		.force_link = 1,
-+		.speed = AR8327_PORT_SPEED_1000,
-+		.duplex = 1,
-+		.txpause = 1,
-+		.rxpause = 1,
-+	}
- };
- 
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ap136_ath9k_data;
-+static struct mdio_board_info ap136_mdio0_info[] = {
-+	{
-+		.bus_id = "ag71xx-mdio.0",
-+		.phy_addr = 0,
-+		.platform_data = &ap136_ar8327_data,
-+	},
-+};
- 
--static int ap136_pci_plat_dev_init(struct pci_dev *dev)
-+static void __init ap136_gmac_setup(void)
- {
--	if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
--		dev->dev.platform_data = &ap136_ath9k_data;
-+	void __iomem *base;
-+	u32 t;
- 
--	return 0;
--}
-+	base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
- 
--static void __init ap136_pci_init(u8 *eeprom)
--{
--	memcpy(ap136_ath9k_data.eeprom_data, eeprom,
--	       sizeof(ap136_ath9k_data.eeprom_data));
-+	t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
-+
-+	t &= ~(QCA955X_ETH_CFG_RGMII_GMAC0 | QCA955X_ETH_CFG_SGMII_GMAC0);
-+	t |= QCA955X_ETH_CFG_RGMII_GMAC0;
- 
--	ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
--	ath79_register_pci();
-+	__raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
-+
-+	iounmap(base);
- }
--#else
--static inline void ap136_pci_init(void) {}
--#endif /* CONFIG_PCI */
- 
- static void __init ap136_setup(void)
- {
- 	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- 
-+	ath79_register_m25p80(NULL);
-+
- 	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
- 				 ap136_leds_gpio);
- 	ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
- 					ARRAY_SIZE(ap136_gpio_keys),
- 					ap136_gpio_keys);
--	ath79_register_spi(&ap136_spi_data, ap136_spi_info,
--			   ARRAY_SIZE(ap136_spi_info));
-+
- 	ath79_register_usb();
--	ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
--	ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
-+	ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL);
-+	ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
-+
-+	ap136_gmac_setup();
-+
-+	ath79_register_mdio(0, 0x0);
-+
-+	ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0);
-+
-+	mdiobus_register_board_info(ap136_mdio0_info,
-+				    ARRAY_SIZE(ap136_mdio0_info));
-+
-+	/* GMAC0 is connected to an AR8327 switch */
-+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+	ath79_eth0_data.phy_mask = BIT(0);
-+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+	ath79_eth0_pll_data.pll_1000 = 0xa6000000;
-+
-+	ath79_register_eth(0);
- }
- 
- MIPS_MACHINE(ATH79_MACH_AP136, "AP136", "Atheros AP136 reference board",