diff options
Diffstat (limited to 'target/linux/ar71xx/patches-3.14/616-MIPS-ath79-ubnt-xw.patch')
| -rw-r--r-- | target/linux/ar71xx/patches-3.14/616-MIPS-ath79-ubnt-xw.patch | 73 |
1 files changed, 73 insertions, 0 deletions
diff --git a/target/linux/ar71xx/patches-3.14/616-MIPS-ath79-ubnt-xw.patch b/target/linux/ar71xx/patches-3.14/616-MIPS-ath79-ubnt-xw.patch new file mode 100644 index 0000000000..ed2fd246ef --- /dev/null +++ b/target/linux/ar71xx/patches-3.14/616-MIPS-ath79-ubnt-xw.patch @@ -0,0 +1,73 @@ +--- a/arch/mips/ath79/mach-ubnt-xm.c ++++ b/arch/mips/ath79/mach-ubnt-xm.c +@@ -332,3 +332,60 @@ static void __init ubnt_uap_pro_setup(vo + MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro", + ubnt_uap_pro_setup); + ++#define UBNT_XW_GPIO_LED_L1 11 ++#define UBNT_XW_GPIO_LED_L2 16 ++#define UBNT_XW_GPIO_LED_L3 13 ++#define UBNT_XW_GPIO_LED_L4 14 ++ ++static struct gpio_led ubnt_xw_leds_gpio[] __initdata = { ++ { ++ .name = "ubnt:red:link1", ++ .gpio = UBNT_XW_GPIO_LED_L1, ++ .active_low = 1, ++ }, { ++ .name = "ubnt:orange:link2", ++ .gpio = UBNT_XW_GPIO_LED_L2, ++ .active_low = 1, ++ }, { ++ .name = "ubnt:green:link3", ++ .gpio = UBNT_XW_GPIO_LED_L3, ++ .active_low = 1, ++ }, { ++ .name = "ubnt:green:link4", ++ .gpio = UBNT_XW_GPIO_LED_L4, ++ .active_low = 1, ++ }, ++}; ++ ++static void __init ubnt_nano_m_xw_setup(void) ++{ ++ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); ++ ++ ath79_register_m25p80(NULL); ++ ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio), ++ ubnt_xw_leds_gpio); ++ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ubnt_xm_gpio_keys), ++ ubnt_xm_gpio_keys); ++ ++ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); ++ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); ++ ++ ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5))); ++ ++ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE); ++ ath79_init_mac(ath79_eth0_data.mac_addr, ++ eeprom + UAP_PRO_MAC0_OFFSET, 0); ++ ++ /* GMAC0 is connected to an AR8326 switch */ ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ++ ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5)); ++ ath79_eth0_data.speed = SPEED_100; ++ ath79_eth0_data.duplex = DUPLEX_FULL; ++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; ++ ath79_register_eth(0); ++} ++ ++MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW", ++ ubnt_nano_m_xw_setup); +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -124,6 +124,7 @@ enum ath79_mach_type { + ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */ + ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */ + ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ ++ ATH79_MACH_UBNT_NANO_M_XW, /* Ubiquiti NanoStation M XW */ + ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ + ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */ + ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */ |