aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/patches-3.14/609-MIPS-ath79-ap136-fixes.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ar71xx/patches-3.14/609-MIPS-ath79-ap136-fixes.patch')
-rw-r--r--target/linux/ar71xx/patches-3.14/609-MIPS-ath79-ap136-fixes.patch316
1 files changed, 0 insertions, 316 deletions
diff --git a/target/linux/ar71xx/patches-3.14/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-3.14/609-MIPS-ath79-ap136-fixes.patch
deleted file mode 100644
index ef0ae9a323..0000000000
--- a/target/linux/ar71xx/patches-3.14/609-MIPS-ath79-ap136-fixes.patch
+++ /dev/null
@@ -1,316 +0,0 @@
---- a/arch/mips/ath79/mach-ap136.c
-+++ b/arch/mips/ath79/mach-ap136.c
-@@ -18,23 +18,29 @@
- *
- */
-
--#include <linux/pci.h>
--#include <linux/ath9k_platform.h>
-+#include <linux/platform_device.h>
-+#include <linux/ar8216_platform.h>
-
--#include "machtypes.h"
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#include "common.h"
-+#include "pci.h"
-+#include "dev-ap9x-pci.h"
- #include "dev-gpio-buttons.h"
-+#include "dev-eth.h"
- #include "dev-leds-gpio.h"
--#include "dev-spi.h"
-+#include "dev-m25p80.h"
-+#include "dev-nfc.h"
- #include "dev-usb.h"
- #include "dev-wmac.h"
--#include "pci.h"
-+#include "machtypes.h"
-
--#define AP136_GPIO_LED_STATUS_RED 14
--#define AP136_GPIO_LED_STATUS_GREEN 19
- #define AP136_GPIO_LED_USB 4
--#define AP136_GPIO_LED_WLAN_2G 13
- #define AP136_GPIO_LED_WLAN_5G 12
-+#define AP136_GPIO_LED_WLAN_2G 13
-+#define AP136_GPIO_LED_STATUS_RED 14
- #define AP136_GPIO_LED_WPS_RED 15
-+#define AP136_GPIO_LED_STATUS_GREEN 19
- #define AP136_GPIO_LED_WPS_GREEN 20
-
- #define AP136_GPIO_BTN_WPS 16
-@@ -43,37 +49,39 @@
- #define AP136_KEYS_POLL_INTERVAL 20 /* msecs */
- #define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL)
-
--#define AP136_WMAC_CALDATA_OFFSET 0x1000
--#define AP136_PCIE_CALDATA_OFFSET 0x5000
-+#define AP136_MAC0_OFFSET 0
-+#define AP136_MAC1_OFFSET 6
-+#define AP136_WMAC_CALDATA_OFFSET 0x1000
-+#define AP136_PCIE_CALDATA_OFFSET 0x5000
-
- static struct gpio_led ap136_leds_gpio[] __initdata = {
- {
-- .name = "qca:green:status",
-+ .name = "ap136:green:status",
- .gpio = AP136_GPIO_LED_STATUS_GREEN,
- .active_low = 1,
- },
- {
-- .name = "qca:red:status",
-+ .name = "ap136:red:status",
- .gpio = AP136_GPIO_LED_STATUS_RED,
- .active_low = 1,
- },
- {
-- .name = "qca:green:wps",
-+ .name = "ap136:green:wps",
- .gpio = AP136_GPIO_LED_WPS_GREEN,
- .active_low = 1,
- },
- {
-- .name = "qca:red:wps",
-+ .name = "ap136:red:wps",
- .gpio = AP136_GPIO_LED_WPS_RED,
- .active_low = 1,
- },
- {
-- .name = "qca:red:wlan-2g",
-+ .name = "ap136:red:wlan-2g",
- .gpio = AP136_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
- {
-- .name = "qca:red:usb",
-+ .name = "ap136:red:usb",
- .gpio = AP136_GPIO_LED_USB,
- .active_low = 1,
- }
-@@ -98,65 +106,151 @@ static struct gpio_keys_button ap136_gpi
- },
- };
-
--static struct ath79_spi_controller_data ap136_spi0_data = {
-- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-- .cs_line = 0,
-+static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg;
-+static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg;
-+
-+static struct ar8327_platform_data ap136_ar8327_data = {
-+ .pad0_cfg = &ap136_ar8327_pad0_cfg,
-+ .pad6_cfg = &ap136_ar8327_pad6_cfg,
-+ .port0_cfg = {
-+ .force_link = 1,
-+ .speed = AR8327_PORT_SPEED_1000,
-+ .duplex = 1,
-+ .txpause = 1,
-+ .rxpause = 1,
-+ },
-+ .port6_cfg = {
-+ .force_link = 1,
-+ .speed = AR8327_PORT_SPEED_1000,
-+ .duplex = 1,
-+ .txpause = 1,
-+ .rxpause = 1,
-+ },
- };
-
--static struct spi_board_info ap136_spi_info[] = {
-+static struct mdio_board_info ap136_mdio0_info[] = {
- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "mx25l6405d",
-- .controller_data = &ap136_spi0_data,
-- }
-+ .bus_id = "ag71xx-mdio.0",
-+ .phy_addr = 0,
-+ .platform_data = &ap136_ar8327_data,
-+ },
- };
-
--static struct ath79_spi_platform_data ap136_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
--};
-+static void __init ap136_common_setup(void)
-+{
-+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+ ath79_register_m25p80(NULL);
-+
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
-+ ap136_leds_gpio);
-+ ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
-+ ARRAY_SIZE(ap136_gpio_keys),
-+ ap136_gpio_keys);
-+
-+ ath79_register_usb();
-+ ath79_register_nfc();
-+
-+ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL);
-+
-+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ap136_ath9k_data;
-+ ath79_register_mdio(0, 0x0);
-+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0);
-
--static int ap136_pci_plat_dev_init(struct pci_dev *dev)
-+ mdiobus_register_board_info(ap136_mdio0_info,
-+ ARRAY_SIZE(ap136_mdio0_info));
-+
-+ /* GMAC0 is connected to the RMGII interface */
-+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth0_data.phy_mask = BIT(0);
-+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+
-+ ath79_register_eth(0);
-+
-+ /* GMAC1 is connected tot eh SGMII interface */
-+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
-+ ath79_eth1_data.speed = SPEED_1000;
-+ ath79_eth1_data.duplex = DUPLEX_FULL;
-+
-+ ath79_register_eth(1);
-+}
-+
-+static void __init ap136_010_setup(void)
- {
-- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
-- dev->dev.platform_data = &ap136_ath9k_data;
-+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-- return 0;
-+ /* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */
-+ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
-+ ap136_ar8327_pad0_cfg.txclk_delay_en = true;
-+ ap136_ar8327_pad0_cfg.rxclk_delay_en = true;
-+ ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
-+ ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
-+
-+ /* GMAC6 of the AR8327 switch is connected to GMAC1 via SGMII */
-+ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
-+ ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
-+ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
-+
-+ ath79_eth0_pll_data.pll_1000 = 0xa6000000;
-+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
-+
-+ ap136_common_setup();
-+ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
- }
-
--static void __init ap136_pci_init(u8 *eeprom)
-+MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
-+ "Atheros AP136-010 reference board",
-+ ap136_010_setup);
-+
-+static void __init ap136_020_common_setup(void)
- {
-- memcpy(ap136_ath9k_data.eeprom_data, eeprom,
-- sizeof(ap136_ath9k_data.eeprom_data));
-+ /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
-+ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
-+ ap136_ar8327_pad0_cfg.sgmii_delay_en = true;
-+
-+ /* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
-+ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII;
-+ ap136_ar8327_pad6_cfg.txclk_delay_en = true;
-+ ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
-+ ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
-+ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
-
-- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
-- ath79_register_pci();
-+ ath79_eth0_pll_data.pll_1000 = 0x56000000;
-+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
-+
-+ ap136_common_setup();
- }
--#else
--static inline void ap136_pci_init(u8 *eeprom) {}
--#endif /* CONFIG_PCI */
-
--static void __init ap136_setup(void)
-+static void __init ap136_020_setup(void)
- {
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
-- ap136_leds_gpio);
-- ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
-- ARRAY_SIZE(ap136_gpio_keys),
-- ap136_gpio_keys);
-- ath79_register_spi(&ap136_spi_data, ap136_spi_info,
-- ARRAY_SIZE(ap136_spi_info));
-- ath79_register_usb();
-- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
-- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
-+ ap136_020_common_setup();
-+ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
- }
-
--MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
-- "Atheros AP136-010 reference board",
-- ap136_setup);
-+MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020",
-+ "Atheros AP136-020 reference board",
-+ ap136_020_setup);
-+
-+/*
-+ * AP135-020 is similar to AP136-020, any future AP135 specific init
-+ * code can be added here.
-+ */
-+static void __init ap135_020_setup(void)
-+{
-+ ap136_leds_gpio[0].name = "ap135:green:status";
-+ ap136_leds_gpio[1].name = "ap135:red:status";
-+ ap136_leds_gpio[2].name = "ap135:green:wps";
-+ ap136_leds_gpio[3].name = "ap135:red:wps";
-+ ap136_leds_gpio[4].name = "ap135:red:wlan-2g";
-+ ap136_leds_gpio[5].name = "ap135:red:usb";
-+
-+ ap136_020_common_setup();
-+ ath79_register_pci();
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_AP135_020, "AP135-020",
-+ "Atheros AP135-020 reference board",
-+ ap135_020_setup);
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -18,7 +18,9 @@ enum ath79_mach_type {
- ATH79_MACH_GENERIC = 0,
- ATH79_MACH_AP121, /* Atheros AP121 reference board */
- ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
-+ ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */
- ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
-+ ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */
- ATH79_MACH_AP81, /* Atheros AP81 reference board */
- ATH79_MACH_DB120, /* Atheros DB120 reference board */
- ATH79_MACH_PB44, /* Atheros PB44 reference board */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -16,16 +16,17 @@ config ATH79_MACH_AP121
- Atheros AP121 reference board.
-
- config ATH79_MACH_AP136
-- bool "Atheros AP136 reference board"
-+ bool "Atheros AP136/AP135 reference board"
- select SOC_QCA955X
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_NFC
- select ATH79_DEV_SPI
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
-- Atheros AP136 reference board.
-+ Atheros AP136 or AP135 reference boards.
-
- config ATH79_MACH_AP81
- bool "Atheros AP81 reference board"