diff options
Diffstat (limited to 'target/linux/ar71xx/files')
| -rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c | 132 |
1 files changed, 132 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c new file mode 100644 index 0000000000..cf3d33a552 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c @@ -0,0 +1,132 @@ +/* + * COMFAST CF-E316N v2 + * by Shenzhen Four Seas Global Link Network Technology Co., Ltd + * + * aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0 (no FCC ID) + * + * Copyright (C) 2015 Paul Fertser <fercerpav@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/timer.h> + +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "dev-usb.h" +#include "machtypes.h" + +static struct gpio_led cf_e316n_v2_leds_gpio[] __initdata = { + { + .name = "cf-e316n-v2:blue:diag", + .gpio = 0, + .active_low = 0, + }, { + .name = "cf-e316n-v2:red:diag", + .gpio = 2, + .active_low = 0, + }, { + .name = "cf-e316n-v2:green:diag", + .gpio = 3, + .active_low = 0, + }, { + .name = "cf-e316n-v2:blue:wlan", + .gpio = 12, + .active_low = 1, + }, { + .name = "cf-e316n-v2:blue:wan", + .gpio = 17, + .active_low = 1, + }, { + .name = "cf-e316n-v2:blue:lan", + .gpio = 19, + .active_low = 1, + }, +}; + +static struct gpio_keys_button cf_e316n_v2_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = 60, + .gpio = 20, + .active_low = 1, + }, +}; + +/* There's a Pericon Technology PT7A7514 connected to GPIO 16 */ +#define EXT_WATCHDOG_GPIO 16 +static struct timer_list gpio_wdt_timer; + +static void gpio_wdt_toggle(unsigned long period) +{ + static int state; + state = !state; + gpio_set_value(EXT_WATCHDOG_GPIO, state); + mod_timer(&gpio_wdt_timer, jiffies + period); +} + +static void __init cf_e316n_v2_setup(void) +{ + u8 *maclan = (u8 *) KSEG1ADDR(0x1f010000); + u8 *macwlan = (u8 *) KSEG1ADDR(0x1f011002); + u8 *ee = (u8 *) KSEG1ADDR(0x1f011000); + u8 tmpmac[ETH_ALEN]; + + gpio_request(EXT_WATCHDOG_GPIO, "PT7A7514 watchdog"); + gpio_direction_output(EXT_WATCHDOG_GPIO, 0); + setup_timer(&gpio_wdt_timer, gpio_wdt_toggle, msecs_to_jiffies(500)); + gpio_wdt_toggle(msecs_to_jiffies(1)); + + ath79_register_m25p80(NULL); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP); + ath79_register_mdio(1, 0x0); + + /* GMAC0 is connected to the PHY0 of the internal switch */ + ath79_switch_data.phy4_mii_en = 1; + ath79_switch_data.phy_poll_mask = BIT(0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; + ath79_init_mac(ath79_eth0_data.mac_addr, maclan, 0); + ath79_register_eth(0); + + /* GMAC1 is connected to the internal switch */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_init_mac(ath79_eth1_data.mac_addr, maclan, 2); + ath79_register_eth(1); + + /* Enable 2x Skyworks SE2576L WLAN power amplifiers */ + gpio_request(13, "RF Amp 1"); + gpio_direction_output(13, 1); + gpio_request(14, "RF Amp 2"); + gpio_direction_output(14, 1); + ath79_init_mac(tmpmac, macwlan, 0); + ath79_register_wmac(ee, tmpmac); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e316n_v2_leds_gpio), + cf_e316n_v2_leds_gpio); + + ath79_register_gpio_keys_polled(1, 20, + ARRAY_SIZE(cf_e316n_v2_gpio_keys), + cf_e316n_v2_gpio_keys); + + /* J1 is a High-Speed USB port, pin 1 is Vcc */ + ath79_register_usb(); +} + +MIPS_MACHINE(ATH79_MACH_CF_E316N_V2, "CF-E316N-V2", "COMFAST CF-E316N v2", + cf_e316n_v2_setup); |