diff options
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c')
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c | 114 |
1 files changed, 0 insertions, 114 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c deleted file mode 100644 index 11006fd1bc..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * Buffalo WLAE-AG300N board support - */ - -#include <linux/gpio.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-ath79/ath79.h> - -#include "dev-eth.h" -#include "dev-ap9x-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "machtypes.h" - -#define WLAEAG300N_MAC_OFFSET 0x20c -#define WLAEAG300N_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WLAEAG300N_KEYS_DEBOUNCE_INTERVAL (3 * WLAEAG300N_KEYS_POLL_INTERVAL) - - -static struct gpio_led wlaeag300n_leds_gpio[] __initdata = { - /* - * Note: Writing 1 into GPIO 13 will power down the device. - */ - { - .name = "buffalo:green:wireless", - .gpio = 14, - .active_low = 1, - }, { - .name = "buffalo:red:wireless", - .gpio = 15, - .active_low = 1, - }, { - .name = "buffalo:green:status", - .gpio = 16, - .active_low = 1, - }, { - .name = "buffalo:red:status", - .gpio = 17, - .active_low = 1, - } -}; - - -static struct gpio_keys_button wlaeag300n_gpio_keys[] __initdata = { - { - .desc = "function", - .type = EV_KEY, - .code = KEY_MODE, - .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL, - .gpio = 0, - .active_low = 1, - }, { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL, - .gpio = 1, - .active_low = 1, - }, { - .desc = "power", - .type = EV_KEY, - .code = KEY_POWER, - .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL, - .gpio = 11, - .active_low = 1, - }, { - .desc = "aoss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL, - .gpio = 12, - .active_low = 1, - } -}; - -static void __init wlaeag300n_setup(void) -{ - u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1fff1000); - u8 *mac1 = eeprom1 + WLAEAG300N_MAC_OFFSET; - - ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 1); - - ath79_register_mdio(0, ~(BIT(0) | BIT(4))); - - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.speed = SPEED_1000; - ath79_eth0_data.duplex = DUPLEX_FULL; - ath79_eth0_data.phy_mask = BIT(0); - - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth1_data.phy_mask = BIT(4); - - ath79_register_eth(0); - ath79_register_eth(1); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wlaeag300n_leds_gpio), - wlaeag300n_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WLAEAG300N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wlaeag300n_gpio_keys), - wlaeag300n_gpio_keys); - - ath79_register_m25p80(NULL); - - ap91_pci_init(eeprom1, mac1); -} - -MIPS_MACHINE(ATH79_MACH_WLAE_AG300N, "WLAE-AG300N", - "Buffalo WLAE-AG300N", wlaeag300n_setup); |