diff options
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c')
| -rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c | 97 |
1 files changed, 94 insertions, 3 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c index cfd7373164..8d8dd40e8a 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c @@ -12,6 +12,7 @@ * - MikroTik RouterBOARD 750 r2 * - MikroTik RouterBOARD LHG 5nD * - MikroTik RouterBOARD wAP2nD + * - MikroTik RouterBOARD wAP G-5HacT2HnDwAP (wAP AC) * * Preliminary support for the following hardware * - MikroTik RouterBOARD cAP2nD @@ -41,6 +42,8 @@ #include <linux/mtd/partitions.h> #include <linux/ar8216_platform.h> +#include <linux/platform_data/phy-at803x.h> +#include <linux/platform_data/mdio-gpio.h> #include <asm/prom.h> #include <asm/mach-ath79/ar71xx_regs.h> @@ -134,10 +137,22 @@ static struct flash_platform_data rbspi_spi_flash_data = { .nr_parts = ARRAY_SIZE(rbspi_spi_partitions), }; -/* Several boards only have a single reset button wired to GPIO 16 */ +/* Several boards only have a single reset button, wired to GPIO 1, 16 or 20 */ +#define RBSPI_GPIO_BTN_RESET01 1 #define RBSPI_GPIO_BTN_RESET16 16 #define RBSPI_GPIO_BTN_RESET20 20 +static struct gpio_keys_button rbspi_gpio_keys_reset01[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RBSPI_KEYS_DEBOUNCE_INTERVAL, + .gpio = RBSPI_GPIO_BTN_RESET01, + .active_low = 1, + }, +}; + static struct gpio_keys_button rbspi_gpio_keys_reset16[] __initdata = { { .desc = "Reset button", @@ -485,6 +500,40 @@ static struct gpio_keys_button rblhg_gpio_keys[] __initdata = { }, }; +/* RB w APG-5HacT2HnD (wAP AC) gpios*/ +#define RBWAPGSC_LED1 1 +#define RBWAPGSC_LED2 8 +#define RBWAPGSC_LED3 9 +#define RBWAPGSC_POWERLED 16 +#define RBWAPGSC_GPIO_MDIO_MDC 12 +#define RBWAPGSC_GPIO_MDIO_DATA 11 +#define RBWAPGSC_MDIO_PHYADDR 0 + +static struct gpio_led rbwapgsc_leds[] __initdata = { + { + .name = "rb:green:led1", + .gpio = RBWAPGSC_LED1, + .active_low = 1, + },{ + .name = "rb:blue:power", + .gpio = RBWAPGSC_POWERLED, + .active_low = 1, + }, +}; + +static struct mdio_gpio_platform_data rbwapgsc_mdio_data = { + .mdc = RBWAPGSC_GPIO_MDIO_MDC, + .mdio = RBWAPGSC_GPIO_MDIO_DATA, + .phy_mask = ~BIT(RBWAPGSC_MDIO_PHYADDR), +}; + +static struct platform_device rbwapgsc_phy_device = { + .name = "mdio-gpio", + .id = 1, + .dev = { + .platform_data = &rbwapgsc_mdio_data + }, +}; static struct gen_74x164_chip_platform_data rbspi_ssr_data = { .base = RBSPI_SSR_GPIO_BASE, @@ -538,7 +587,7 @@ void __init rbspi_wlan_init(u16 id, int wmac_offset) } #define RBSPI_MACH_BUFLEN 64 -/* +/* * Common platform init routine for all SPI NOR devices. */ static int __init rbspi_platform_setup(void) @@ -641,7 +690,7 @@ static void __init rbspi_network_setup(u32 flags, int gmac1_offset, rbspi_wlan_init(1, wmac1_offset); } -/* +/* * Init the mAP lite hardware (QCA953x). * The mAP L-2nD (mAP lite) has a single ethernet port, connected to PHY0. * Trying to use GMAC0 in direct mode was unsucessful, so we're @@ -958,6 +1007,47 @@ static void __init rbmap_setup(void) rbspi_gpio_keys_reset16); } +/* + * Init the wAPGSC (RB wAPG-5HacT2HnD // wAP AC) hardware. + * The wAPGSC has one Ethernet port via AR8033 with PoE input, dual radio (SoC + * 2.4 GHz and external QCA9880) and a ZT2046Q temperature and voltage sensor + * (currently not supported). + */ +static void __init rbwapgsc_setup(void) +{ + u32 flags = RBSPI_HAS_PCI; + + if (rbspi_platform_setup()) + return; + + rbspi_peripherals_setup(flags); + + platform_device_register(&rbwapgsc_phy_device); + + ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0); + ath79_eth1_data.mii_bus_dev = &rbwapgsc_phy_device.dev; + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; + ath79_eth1_data.phy_mask = BIT(RBWAPGSC_MDIO_PHYADDR); + ath79_eth1_pll_data.pll_1000 = 0x03000101; + ath79_eth1_pll_data.pll_100 = 0x80000101; + ath79_eth1_pll_data.pll_10 = 0x80001313; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_register_eth(1); + + rbspi_wlan_init(1, 2); + + ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rbspi_gpio_keys_reset01), + rbspi_gpio_keys_reset01); + + ath79_gpio_function_enable(QCA955X_GPIO_FUNC_JTAG_DISABLE| + QCA955X_GPIO_REG_OUT_FUNC4| + QCA955X_GPIO_REG_OUT_FUNC3); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(rbwapgsc_leds), + rbwapgsc_leds); +} MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_941, "H951L", rbhapl_setup); @@ -968,3 +1058,4 @@ MIPS_MACHINE_NONAME(ATH79_MACH_RB_LHG5, "lhg", rblhg_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAP, "wap-hb", rbwap_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_CAP, "cap-hb", rbcap_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAP, "map2-hb", rbmap_setup); +MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAPAC, "wapg-sc", rbwapgsc_setup); |