diff options
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c')
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c | 179 |
1 files changed, 0 insertions, 179 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c deleted file mode 100644 index 7c41e7fbc0..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * PowerCloud Systems CR5000 support - * - * Copyright (c) 2011 Qualcomm Atheros - * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2012-2013 PowerCloud Systems - * Copyright (c) 2015 Daniel Dickinson <openwrt@daniel.thecshore.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/gpio.h> -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define CR5000_GPIO_LED_WLAN_2G 14 -#define CR5000_GPIO_LED_WPS 12 -#define CR5000_GPIO_LED_POWER_AMBER 4 -/* GPIO2 has to have JTAG disabled as it is also to - * power led - */ -#define CR5000_GPIO_LED_POWER_ENABLE 2 -#define CR5000_GPIO_BTN_WPS 16 -#define CR5000_GPIO_BTN_RESET 17 - -#define CR5000_KEYS_POLL_INTERVAL 20 /* msecs */ -#define CR5000_KEYS_DEBOUNCE_INTERVAL (3 * CR5000_KEYS_POLL_INTERVAL) - -#define CR5000_MAC0_OFFSET 0 -#define CR5000_WMAC_CALDATA_OFFSET 0x1000 -#define CR5000_WMAC_MAC_OFFSET 0x1002 -#define CR5000_PCIE_CALDATA_OFFSET 0x5000 -#define CR5000_PCIE_WMAC_OFFSET 0x5002 - -static struct gpio_led cr5000_leds_gpio[] __initdata = { - { - .name = "pcs:amber:power", - .gpio = CR5000_GPIO_LED_POWER_AMBER, - .active_low = 1, - }, - { - .name = "pcs:white:wps", - .gpio = CR5000_GPIO_LED_WPS, - .active_low = 1, - }, - { - .name = "pcs:blue:wlan", - .gpio = CR5000_GPIO_LED_WLAN_2G, - .active_low = 1, - }, -}; - -static struct gpio_keys_button cr5000_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = CR5000_KEYS_DEBOUNCE_INTERVAL, - .gpio = CR5000_GPIO_BTN_WPS, - .active_low = 1, - }, - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = CR5000_KEYS_DEBOUNCE_INTERVAL, - .gpio = CR5000_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg cr5000_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_led_cfg cr5000_ar8327_led_cfg = { - .led_ctrl0 = 0xcc35cc35, - .led_ctrl1 = 0xca35ca35, - .led_ctrl2 = 0xc935c935, - .led_ctrl3 = 0x03ffff00, - .open_drain = true, -}; - -static struct ar8327_platform_data cr5000_ar8327_data = { - .pad0_cfg = &cr5000_ar8327_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &cr5000_ar8327_led_cfg, -}; - -static struct mdio_board_info cr5000_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &cr5000_ar8327_data, - }, -}; - -static void __init cr5000_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - struct ath9k_platform_data *pdata; - - ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); - gpio_request_one(CR5000_GPIO_LED_POWER_ENABLE, - GPIOF_OUT_INIT_LOW, "Power LED enable"); - ath79_gpio_output_select(CR5000_GPIO_LED_POWER_AMBER, AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(CR5000_GPIO_LED_WLAN_2G, AR934X_GPIO_OUT_GPIO); - ath79_gpio_output_select(CR5000_GPIO_LED_WPS, AR934X_GPIO_OUT_GPIO); - - ath79_register_m25p80(NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(cr5000_leds_gpio), - cr5000_leds_gpio); - ath79_register_gpio_keys_polled(-1, CR5000_KEYS_POLL_INTERVAL, - ARRAY_SIZE(cr5000_gpio_keys), - cr5000_gpio_keys); - ath79_register_usb(); - ath79_register_wmac(art + CR5000_WMAC_CALDATA_OFFSET, art + CR5000_WMAC_MAC_OFFSET); - ap91_pci_init(NULL, art + CR5000_PCIE_WMAC_OFFSET); - pdata = ap9x_pci_get_wmac_data(0); - if (pdata) - pdata->use_eeprom = true; - - ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); - ath79_register_mdio(0, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, art + CR5000_MAC0_OFFSET, 0); - - mdiobus_register_board_info(cr5000_mdio0_info, - ARRAY_SIZE(cr5000_mdio0_info)); - - /* GMAC0 is connected to an AR8327 switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x06000000; - ath79_register_eth(0); -} - -MIPS_MACHINE(ATH79_MACH_CR5000, "CR5000", "PowerCloud Systems CR5000", - cr5000_setup); |