diff options
Diffstat (limited to 'target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh2.c')
-rw-r--r-- | target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh2.c | 190 |
1 files changed, 0 insertions, 190 deletions
diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh2.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh2.c deleted file mode 100644 index ad1a0338b9..0000000000 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh2.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * Buffalo WZR-HP-G300NH2 board support - * - * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org> - * Copyright (C) 2011 Mark Deneen <mdeneen@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#include <asm/mips_machine.h> -#include <asm/mach-ar71xx/ar71xx.h> -#include <asm/mach-ar71xx/gpio.h> - -#include "machtype.h" -#include "devices.h" -#include "dev-ap91-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" - - -#define WZRHPG300NH2_MAC_OFFSET 0x20c -#define WZRHPG300NH2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH2_KEYS_POLL_INTERVAL) - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition wzrhpg300nh2_flash_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x0040000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "u-boot-env", - .offset = 0x0040000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "art", - .offset = 0x0050000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "kernel", - .offset = 0x0060000, - .size = 0x0100000, - }, { - .name = "rootfs", - .offset = 0x0160000, - .size = 0x1e90000, - }, { - .name = "user_property", - .offset = 0x1ff0000, - .size = 0x0010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x0060000, - .size = 0x1f90000, - } -}; - -#endif /* CONFIG_MTD_PARTITIONS */ - - - -static struct flash_platform_data wzrhpg300nh2_flash_data = { -#ifdef CONFIG_MTD_PARTITIONS - .parts = wzrhpg300nh2_flash_partitions, - .nr_parts = ARRAY_SIZE(wzrhpg300nh2_flash_partitions), -#endif -}; - - -static struct gpio_led wzrhpg300nh2_leds_gpio[] __initdata = { - { - .name = "buffalo:red:diag", - .gpio = 16, - .active_low = 1, - }, -}; - -static struct gpio_led wzrhpg300nh2_wmac_leds_gpio[] = { - { - .name = "buffalo:blue:usb", - .gpio = 4, - .active_low = 1, - }, - { - .name = "buffalo:orange:security", - .gpio = 6, - .active_low = 1, - }, - { - .name = "buffalo:green:router", - .gpio = 7, - .active_low = 1, - }, - { - .name = "buffalo:blue:movie_engine_on", - .gpio = 8, - .active_low = 1, - }, - { - .name = "buffalo:blue:movie_engine_off", - .gpio = 9, - .active_low = 1, - }, -}; - -/* The AOSS button is wmac gpio 12 */ -static struct gpio_keys_button wzrhpg300nh2_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, - .gpio = 1, - .active_low = 1, - }, { - .desc = "usb", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, - .gpio = 7, - .active_low = 1, - }, { - .desc = "qos", - .type = EV_KEY, - .code = BTN_3, - .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, - .gpio = 11, - .active_low = 0, - }, { - .desc = "router_on", - .type = EV_KEY, - .code = BTN_5, - .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL, - .gpio = 8, - .active_low = 0, - }, -}; - - -static void __init wzrhpg300nh2_setup(void) -{ - - u8 *eeprom = (u8 *) KSEG1ADDR(0x1f051000); - u8 *mac0 = eeprom + WZRHPG300NH2_MAC_OFFSET; - /* There is an eth1 but it is not connected to the switch */ - - ar71xx_add_device_m25p80_multi(&wzrhpg300nh2_flash_data); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac0, 0); - ar71xx_add_device_mdio(0, ~(BIT(0))); - - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac0, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.speed = SPEED_1000; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - ar71xx_eth0_data.phy_mask = BIT(0); - - ar71xx_add_device_eth(0); - ar71xx_add_device_usb(); - /* gpio13 is usb power. Turn it on. */ - gpio_request(13, "usb"); - gpio_direction_output(13, 1); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh2_leds_gpio), - wzrhpg300nh2_leds_gpio); - ar71xx_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wzrhpg300nh2_gpio_keys), - wzrhpg300nh2_gpio_keys); - ap91_pci_setup_wmac_led_pin(5); - ap91_pci_setup_wmac_leds(wzrhpg300nh2_wmac_leds_gpio, - ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio)); - - ap91_pci_init(eeprom, mac0); -} - -MIPS_MACHINE(AR71XX_MACH_WZR_HP_G300NH2, "WZR-HP-G300NH2", - "Buffalo WZR-HP-G300NH2", wzrhpg300nh2_setup); - |