diff options
Diffstat (limited to 'target/linux/ar71xx/base-files')
| -rw-r--r-- | target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 46 | ||||
| -rw-r--r-- | target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 56 |
2 files changed, 51 insertions, 51 deletions
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 3924202d8e..8fe57c87cc 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -12,8 +12,8 @@ ath9k_eeprom_die() { ath9k_eeprom_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_chardev $part) @@ -26,8 +26,8 @@ ath9k_eeprom_extract() { ath9k_ubi_eeprom_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local ubidev=$(nand_find_ubi $CI_UBIPART) local ubi @@ -42,7 +42,7 @@ ath9k_ubi_eeprom_extract() { ath9k_eeprom_extract_reverse() { local part=$1 local offset=$2 - local count=$3 + local count=$(($3)) local mtd local reversed local caldata @@ -72,43 +72,43 @@ case "$FIRMWARE" in case $board in c-55|\ c-60) - ath9k_eeprom_extract "art" 4096 2048 + ath9k_eeprom_extract "art" 0x1000 0x800 ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1) ;; fritz4020|\ fritz450e) - ath9k_eeprom_extract_reverse "urlader" 5441 1088 + ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440 ;; mr18) . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 4096 2048 + ath9k_ubi_eeprom_extract "caldata" 0x1000 0x800 else - ath9k_eeprom_extract "odm-caldata" 4096 2048 + ath9k_eeprom_extract "odm-caldata" 0x1000 0x800 fi ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +1) ;; r6100 | \ wndr3700v4 | \ wndr4300) - ath9k_eeprom_extract "caldata" 4096 2048 + ath9k_eeprom_extract "caldata" 0x1000 0x800 ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0x0) ;; rambutan) - ath9k_eeprom_extract "art" 4096 2048 + ath9k_eeprom_extract "art" 0x1000 0x800 ;; wlr8100) - ath9k_eeprom_extract "art" 4096 2048 + ath9k_eeprom_extract "art" 0x1000 0x800 ath9k_patch_firmware_mac $(mtd_get_mac_ascii u-boot-env "ethaddr") ;; z1) . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 4096 2048 + ath9k_ubi_eeprom_extract "caldata" 0x1000 0x800 else - ath9k_eeprom_extract "origcaldata" 4096 2048 + ath9k_eeprom_extract "origcaldata" 0x1000 0x800 fi ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +2) ;; @@ -121,34 +121,34 @@ case "$FIRMWARE" in "pci_wmac0.eeprom") case $board in c-55) - ath9k_eeprom_extract "art" 20480 2048 + ath9k_eeprom_extract "art" 0x5000 0x800 ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2) ;; fritz300e) - ath9k_eeprom_extract_reverse "urloader" 5441 1088 + ath9k_eeprom_extract_reverse "urloader" 0x1541 0x440 ;; mr18) . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 20480 2048 + ath9k_ubi_eeprom_extract "caldata" 0x5000 0x800 else - ath9k_eeprom_extract "odm-caldata" 20480 2048 + ath9k_eeprom_extract "odm-caldata" 0x5000 0x800 fi ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +2) ;; wndr3700v4 | \ wndr4300) - ath9k_eeprom_extract "caldata" 20480 2048 + ath9k_eeprom_extract "caldata" 0x5000 0x800 ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0xc) ;; z1) . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 86016 4096 + ath9k_ubi_eeprom_extract "caldata" 0x15000 0x1000 else - ath9k_eeprom_extract "origcaldata" 86016 4096 + ath9k_eeprom_extract "origcaldata" 0x15000 0x1000 fi ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +3) ;; @@ -164,9 +164,9 @@ case "$FIRMWARE" in . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 36864 2048 + ath9k_ubi_eeprom_extract "caldata" 0x9000 0x800 else - ath9k_eeprom_extract "odm-caldata" 36864 2048 + ath9k_eeprom_extract "odm-caldata" 0x9000 0x800 fi ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +3) ;; diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index a3d4770b32..2ba8de4783 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -7,8 +7,8 @@ ath10kcal_die() { ath10kcal_from_file() { local source=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ ath10kcal_die "failed to extract calibration data from $source" @@ -16,8 +16,8 @@ ath10kcal_from_file() { ath10kcal_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd cal_size mtd=$(find_mtd_chardev $part) @@ -57,17 +57,17 @@ case "$FIRMWARE" in mr1750|\ mr1750v2|\ om5p-acv2) - ath10kcal_extract "ART" 20480 2116 + ath10kcal_extract "ART" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; archer-c25-v1|\ tl-wdr6500-v2) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) ;; archer-c7-v4|\ archer-c7-v5) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1) ;; cf-e355ac-v1|\ @@ -81,60 +81,60 @@ case "$FIRMWARE" in oolite-v5.2-dev|\ sr3200|\ xd3200) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ;; dap-2695-a1) - ath10kcal_extract "radiocfg" 20480 2116 + ath10kcal_extract "radiocfg" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a) ;; dir-869-a1|\ qihoo-c301) - ath10kcal_extract "radiocfg" 20480 2116 + ath10kcal_extract "radiocfg" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_ascii devdata wlan5mac) ;; dw33d) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_binary art 0x12) ;; epg5000|\ esr1750) - ath10kcal_extract "caldata" 20480 2116 + ath10kcal_extract "caldata" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) ;; gl-ar750s|\ gl-ar750|\ tl-wpa8630) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) ;; koala) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0xc) +0) ;; mc-mac1200r) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1) ;; r6100) - ath10kcal_extract "caldata" 20480 2116 + ath10kcal_extract "caldata" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) +2) ;; rb-952ui-5ac2nd|\ rb-wapg-5hact2hnd) - ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116 + ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 0x5000 0x844 ;; re355|\ re450|\ tl-wr902ac-v1) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2) ;; unifiac-lite|\ unifiac-pro) - ath10kcal_extract "EEPROM" 20480 2116 + ath10kcal_extract "EEPROM" 0x5000 0x844 ;; wi2a-ac200i) - ath10kcal_extract "ART" 20480 2116 + ath10kcal_extract "ART" 0x5000 0x844 ;; esac ;; @@ -142,26 +142,26 @@ case "$FIRMWARE" in case $board in archer-c5|\ archer-c7) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) ;; nbg6616|\ nbg6716) - ath10kcal_extract "RFdata" 20480 2116 + ath10kcal_extract "RFdata" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) ;; om5p-ac) - ath10kcal_extract "ART" 20480 2116 + ath10kcal_extract "ART" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; rb-911g-5hpacd|\ rb-921gs-5hpacd-r2|\ rb-922uags-5hpacd|\ rb-962uigs-5hact2hnt) - ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116 + ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 0x5000 0x844 ;; wlr8100) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1) ;; esac @@ -174,18 +174,18 @@ case "$FIRMWARE" in archer-c60-v1|\ cf-e355ac-v2|\ cf-e375ac) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;; archer-c60-v2) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1) ;; cf-e385ac) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ;; esac ;; |