diff options
Diffstat (limited to 'target/linux/ar71xx/base-files')
9 files changed, 90 insertions, 18 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index cf05859813..7551455a8a 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -813,6 +813,10 @@ wzr-hp-g300nh) ucidef_set_led_usbdev "usb" "USB" "buffalo:blue:usb" "1-1" ;; +z1) + ucidef_set_led_netdev "wlan1" "WLAN1" "z1:blue:tricolor0" "wlan1" + ;; + zbt-we1526) ucidef_set_led_netdev "wan" "WAN" "zbt-we1526:green:wan" "eth1" ucidef_set_led_switch "lan1" "LAN1" "zbt-we1526:green:lan1" "switch0" "0x10" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index b637113eff..2a50c9dca5 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -538,6 +538,12 @@ wndr3700) ucidef_add_switch_port_attr "switch0" 5 led 2 ;; +z1) + ucidef_set_interfaces_lan_wan "eth0" "eth1" + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" "5:wan" + ;; + *) ucidef_set_interfaces_lan_wan "eth0" "eth1" ;; diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 69ef609332..6ce49b0e9b 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -426,6 +426,9 @@ get_status_led() { wrt160nl) status_led="wrt160nl:blue:wps" ;; + z1) + status_led="z1:green:tricolor0" + ;; zbt-we1526) status_led="zbt-we1526:green:status" ;; diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 3b0229d3d5..3141625307 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -73,6 +73,16 @@ case "$FIRMWARE" in ath9k_eeprom_extract "caldata" 4096 2048 ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0) ;; + z1) + . /lib/upgrade/nand.sh + + if [ -n "$(nand_find_volume ubi0 caldata)" ]; then + ath9k_ubi_eeprom_extract "caldata" 4096 2048 + else + ath9k_eeprom_extract "origcaldata" 4096 2048 + fi + ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 102) +2) + ;; *) ath9k_eeprom_die "board $board is not supported yet" ;; @@ -100,6 +110,16 @@ case "$FIRMWARE" in ath9k_eeprom_extract "caldata" 20480 2048 ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 12) ;; + z1) + . /lib/upgrade/nand.sh + + if [ -n "$(nand_find_volume ubi0 caldata)" ]; then + ath9k_ubi_eeprom_extract "caldata" 86016 4096 + else + ath9k_eeprom_extract "origcaldata" 86016 4096 + fi + ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 102) +3) + ;; *) ath9k_eeprom_die "board $board is not supported yet" ;; diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration index aa0e1b4e2f..ee8f63b5d5 100644 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration @@ -78,6 +78,7 @@ whr-hp-g300n|\ whr-hp-gn|\ wzr-hp-ag300h|\ wzr-hp-g450h|\ +z1|\ ew-dorin|\ ew-dorin-router) migrate_switch_name "eth0" "switch0" diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 7a3759e7d5..dae6fb2a2d 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -1134,6 +1134,9 @@ ar71xx_board_detect() { *WHR-HP-G300N) name="whr-hp-g300n" ;; + *Z1) + name="z1" + ;; *ZBT-WE1526) name="zbt-we1526" ;; diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx index 39da3090f8..60e278782f 100644 --- a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx +++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx @@ -49,6 +49,10 @@ preinit_set_mac_address() { wrt160nl) fetch_mac_from_mtd nvram lan_hwaddr wan_hwaddr ;; + z1) + mac_lan=$(mtd_get_mac_binary_ubi board-config 102) + [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan" + ;; esac } diff --git a/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh b/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh index cc7a86c93d..78cde20a13 100644 --- a/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh @@ -1,6 +1,6 @@ #!/bin/sh # -# Copyright (C) 2015 Chris Blake <chrisrblake93@gmail.com> +# Copyright (C) 2015-2016 Chris Blake <chrisrblake93@gmail.com> # # Custom upgrade script for Meraki NAND devices (ex. MR18) # Based on dir825.sh and stock nand functions @@ -14,34 +14,52 @@ get_magic_at() { dd bs=1 count=2 skip=$pos if=$mtddev 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' } -mr18_is_caldata_valid() { - local mtddev=$1 +meraki_is_caldata_valid() { + local board=$1 + local mtddev=$2 local magic - magic=$(get_magic_at $mtddev 4096) - [ "$magic" != "0202" ] && return 0 + case "$board" in + "mr18") + magic=$(get_magic_at $mtddev 4096) + [ "$magic" != "0202" ] && return 0 + + magic=$(get_magic_at $mtddev 20480) + [ "$magic" != "0202" ] && return 0 - magic=$(get_magic_at $mtddev 20480) - [ "$magic" != "0202" ] && return 0 + magic=$(get_magic_at $mtddev 36864) + [ "$magic" != "0202" ] && return 0 + + return 1 + ;; + "z1") + magic=$(get_magic_at $mtddev 4096) + [ "$magic" != "0202" ] && return 0 - magic=$(get_magic_at $mtddev 36864) - [ "$magic" != "0202" ] && return 0 + magic=$(get_magic_at $mtddev 86016) + [ "$magic" != "a55a" ] && return 0 - return 1 + return 1 + ;; + *) + return 1 + ;; + esac } merakinand_copy_caldata() { local cal_src=$1 local cal_dst=$2 - local ubidev=$( nand_find_ubi $CI_UBIPART ) + local ubidev="$(nand_find_ubi $CI_UBIPART)" local board_name="$(cat /tmp/sysinfo/board_name)" local rootfs_size="$(ubinfo /dev/ubi0 -N rootfs_data | grep "Size" | awk '{ print $6 }')" # Setup partitions using board name, in case of future platforms case "$board_name" in - "mr18") + "mr18"|\ + "z1") # Src is MTD - mtd_src=$(find_mtd_chardev $cal_src) + mtd_src="$(find_mtd_chardev $cal_src)" [ -n "$mtd_src" ] || { echo "no mtd device found for partition $cal_src" exit 1 @@ -56,12 +74,12 @@ merakinand_copy_caldata() { exit 1 } - mr18_is_caldata_valid "$mtd_src" && { + meraki_is_caldata_valid "$board_name" "$mtd_src" && { echo "no valid calibration data found in $cal_src" exit 1 } - mr18_is_caldata_valid "/dev/$mtd_dst" && { + meraki_is_caldata_valid "$board_name" "/dev/$mtd_dst" && { echo "Copying calibration data from $cal_src to $cal_dst..." dd if="$mtd_src" of=/tmp/caldata.tmp 2>/dev/null ubiupdatevol "/dev/$mtd_dst" /tmp/caldata.tmp @@ -89,6 +107,11 @@ merakinand_do_kernel_check() { echo "pass" && return 0 } ;; + "z1") + [ "$image_magic_word" == "4d495053" ] && { + echo "pass" && return 0 + } + ;; esac exit 1 @@ -102,7 +125,8 @@ merakinand_do_platform_check() { local kernel_magic="$(merakinand_do_kernel_check $1 $2)" case "$board_name" in - "mr18") + "mr18"|\ + "z1") [ "$control_length" = 0 -o "$file_type" != "squashfs" -o "$kernel_magic" != "pass" ] && { echo "Invalid sysupgrade file for $board_name" return 1 @@ -128,6 +152,11 @@ merakinand_do_upgrade() { merakinand_copy_caldata "odm-caldata" "caldata" nand_do_upgrade $1 ;; + "z1") + # Check and create UBI caldata if it's invalid + merakinand_copy_caldata "origcaldata" "caldata" + nand_do_upgrade $1 + ;; *) echo "Unsupported device $board_name"; exit 1 diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 716fa525a9..c78d1fb34f 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -472,7 +472,8 @@ platform_check_image() { } return 0 ;; - mr18) + mr18 | \ + z1 ) merakinand_do_platform_check $board $1 return $?; ;; @@ -543,7 +544,8 @@ platform_pre_upgrade() { wndr4300 ) nand_do_upgrade "$1" ;; - mr18) + mr18 | \ + z1 ) merakinand_do_upgrade "$1" ;; esac |