aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/apm821xx
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/apm821xx')
-rw-r--r--target/linux/apm821xx/config-4.19335
-rw-r--r--target/linux/apm821xx/patches-4.19/010-dt-bindings-dmaengine-dw-dmac-add-protection-control.patch74
-rw-r--r--target/linux/apm821xx/patches-4.19/023-0003-crypto-drop-mask-CRYPTO_ALG_ASYNC-from-cipher-tfm-al.patch34
-rw-r--r--target/linux/apm821xx/patches-4.19/023-0004-crypto4xx_core-don-t-abuse-__dma_sync_page.patch30
-rw-r--r--target/linux/apm821xx/patches-4.19/023-0005-cross-tree-phase-out-dma_zalloc_coherent.patch40
-rw-r--r--target/linux/apm821xx/patches-4.19/023-0006-crypto-crypto4xx-add-prng-crypto-support.patch199
-rw-r--r--target/linux/apm821xx/patches-4.19/023-0012-crypto-crypto4xx-get-rid-of-redundant-using_sd-varia.patch63
-rw-r--r--target/linux/apm821xx/patches-4.19/140-GPIO-add-named-gpio-exports.patch169
-rw-r--r--target/linux/apm821xx/patches-4.19/201-add-amcc-apollo3g-support.patch30
-rw-r--r--target/linux/apm821xx/patches-4.19/202-add-netgear-wndr4700-support.patch32
-rw-r--r--target/linux/apm821xx/patches-4.19/300-fix-atheros-nics-on-apm82181.patch51
-rw-r--r--target/linux/apm821xx/patches-4.19/301-fix-memory-map-wndr4700.patch14
-rw-r--r--target/linux/apm821xx/patches-4.19/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch545
-rw-r--r--target/linux/apm821xx/patches-4.19/802-usb-xhci-force-msi-renesas-xhci.patch53
-rw-r--r--target/linux/apm821xx/patches-4.19/803-hwmon-tc654-add-detection-routine.patch65
-rw-r--r--target/linux/apm821xx/patches-4.19/804-hwmon-tc654-add-thermal_cooling-device.patch174
16 files changed, 0 insertions, 1908 deletions
diff --git a/target/linux/apm821xx/config-4.19 b/target/linux/apm821xx/config-4.19
deleted file mode 100644
index 6d4c30b55d..0000000000
--- a/target/linux/apm821xx/config-4.19
+++ /dev/null
@@ -1,335 +0,0 @@
-# CONFIG_40x is not set
-CONFIG_44x=y
-CONFIG_460EX=y
-CONFIG_4xx=y
-CONFIG_4xx_SOC=y
-# CONFIG_ADVANCED_OPTIONS is not set
-CONFIG_APM821xx=y
-CONFIG_APOLLO3G=y
-# CONFIG_ARCHES is not set
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_PTE_SPECIAL=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS=11
-CONFIG_ARCH_MMAP_RND_BITS_MAX=17
-CONFIG_ARCH_MMAP_RND_BITS_MIN=11
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
-CONFIG_AUDIT_ARCH=y
-# CONFIG_BAMBOO is not set
-CONFIG_BCH=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLUESTONE=y
-CONFIG_BOOKE=y
-CONFIG_BOOKE_WDT=y
-# CONFIG_BOUNCE is not set
-CONFIG_BUILD_SALT=""
-# CONFIG_CANYONLANDS is not set
-CONFIG_CC_HAS_SANCOV_TRACE_PC=y
-CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
-CONFIG_CLANG_VERSION=0
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs noinitrd"
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_CONSOLE_LOGLEVEL_QUIET=4
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AKCIPHER2=y
-CONFIG_CRYPTO_CCM=y
-CONFIG_CRYPTO_CFB=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DEV_PPC4XX=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_GCM=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_GHASH=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_KPP2=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MD5_PPC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA1_PPC=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DTC=y
-# CONFIG_E200 is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EBONY is not set
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-# CONFIG_EIGER is not set
-CONFIG_EXTRA_TARGETS="uImage"
-CONFIG_FIXED_PHY=y
-CONFIG_FREEZER=y
-# CONFIG_FSL_LBC is not set
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_GLACIER is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_FASTPATH_LIMIT=512
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_GUP=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KPROBES_ON_FTRACE=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_PPC4XX=y
-CONFIG_HZ=1000
-CONFIG_HZ_1000=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IBM_IIC=y
-CONFIG_IBM_EMAC=y
-CONFIG_IBM_EMAC_EMAC4=y
-CONFIG_IBM_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_EMAC_RGMII=y
-CONFIG_IBM_EMAC_RXB=128
-CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0
-CONFIG_IBM_EMAC_TAH=y
-CONFIG_IBM_EMAC_TXB=128
-# CONFIG_ICE is not set
-# CONFIG_ICON is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_ISA_DMA_API=y
-# CONFIG_JFFS2_FS is not set
-# CONFIG_KATMAI is not set
-CONFIG_KERNEL_GZIP=y
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_LEDS_TRIGGER_MTD=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_BCH=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_BCH=y
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND_NDFC=y
-# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-# CONFIG_NF_LOG_BRIDGE is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_IRQS=512
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND=y
-# CONFIG_OVERLAY_FS_METACOPY is not set
-CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
-# CONFIG_OVERLAY_FS_XINO_AUTO is not set
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_MSI=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYS_64BIT=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PM=y
-CONFIG_PM_AUTOSLEEP=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_PM_WAKELOCKS=y
-CONFIG_PM_WAKELOCKS_GC=y
-CONFIG_PM_WAKELOCKS_LIMIT=100
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_PPC44x_SIMPLE=y
-CONFIG_PPC4xx_CPM=y
-CONFIG_PPC4xx_GPIO=y
-CONFIG_PPC4xx_MSI=y
-CONFIG_PPC4xx_OCM=y
-CONFIG_PPC4xx_PCI_EXPRESS=y
-# CONFIG_PPC64 is not set
-# CONFIG_PPC_47x is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y
-CONFIG_PPC_ADV_DEBUG_DVCS=2
-CONFIG_PPC_ADV_DEBUG_IACS=4
-CONFIG_PPC_ADV_DEBUG_REGS=y
-# CONFIG_PPC_BOOK3S_32 is not set
-CONFIG_PPC_DCR=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_EARLY_DEBUG is not set
-CONFIG_PPC_FPU=y
-CONFIG_PPC_INDIRECT_PCI=y
-# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set
-CONFIG_PPC_LIB_RHEAP=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MSI_BITMAP=y
-CONFIG_PPC_PCI_CHOICE=y
-# CONFIG_PPC_PTDUMP is not set
-CONFIG_PPC_UDBG_16550=y
-CONFIG_PPC_WERROR=y
-CONFIG_PTE_64BIT=y
-# CONFIG_RAINIER is not set
-# CONFIG_RANDOM_TRUST_CPU is not set
-CONFIG_RAS=y
-CONFIG_RD_GZIP=y
-# CONFIG_RENESAS_PHY is not set
-# CONFIG_RPMSG_VIRTIO is not set
-CONFIG_RSEQ=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SAM440EP is not set
-# CONFIG_SEQUOIA is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SIMPLE_GPIO=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SRCU=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-# CONFIG_TAISHAN is not set
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_THREAD_SHIFT=13
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VDSO32=y
-# CONFIG_VIRTIO_MENU is not set
-# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
-# CONFIG_WARP is not set
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WNDR4700 is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_XILINX_VCU is not set
-# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
-# CONFIG_XIL_AXIS_FIFO is not set
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_POWERPC=y
-# CONFIG_YOSEMITE is not set
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/apm821xx/patches-4.19/010-dt-bindings-dmaengine-dw-dmac-add-protection-control.patch b/target/linux/apm821xx/patches-4.19/010-dt-bindings-dmaengine-dw-dmac-add-protection-control.patch
deleted file mode 100644
index 572b8b6522..0000000000
--- a/target/linux/apm821xx/patches-4.19/010-dt-bindings-dmaengine-dw-dmac-add-protection-control.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 538098281ce884a51d2aa4ab445056a41741c6ad Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sat, 17 Nov 2018 17:17:20 +0100
-Subject: [PATCH] dt-bindings: dmaengine: dw-dmac: add protection control
- property
-
-This patch for the DesignWare AHB Central
-Direct Memory Access Controller adds the dma
-protection control property:
- "snps,dma-protection-control"
-
-as well as the properties specific values defines into
-a new include file: include/dt-bindings/dma/dw-dmac.h
-
-Note: The protection control signals are one-to-one
-mapped to the AHB HPROT[1:3] signals for this controller.
-The HPROT0 (Data Access) is always hardwired to 1.
-
-Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- Documentation/devicetree/bindings/dma/snps-dma.txt | 4 ++++
- MAINTAINERS | 4 +++-
- include/dt-bindings/dma/dw-dmac.h | 14 ++++++++++++++
- 3 files changed, 21 insertions(+), 1 deletion(-)
- create mode 100644 include/dt-bindings/dma/dw-dmac.h
-
---- a/Documentation/devicetree/bindings/dma/snps-dma.txt
-+++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
-@@ -27,6 +27,10 @@ Optional properties:
- general purpose DMA channel allocator. False if not passed.
- - multi-block: Multi block transfers supported by hardware. Array property with
- one cell per channel. 0: not supported, 1 (default): supported.
-+- snps,dma-protection-control: AHB HPROT[3:1] protection setting.
-+ The default value is 0 (for non-cacheable, non-buffered,
-+ unprivileged data access).
-+ Refer to include/dt-bindings/dma/dw-dmac.h for possible values.
-
- Example:
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -14075,9 +14075,11 @@ SYNOPSYS DESIGNWARE DMAC DRIVER
- M: Viresh Kumar <vireshk@kernel.org>
- R: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- S: Maintained
-+F: Documentation/devicetree/bindings/dma/snps-dma.txt
-+F: drivers/dma/dw/
-+F: include/dt-bindings/dma/dw-dmac.h
- F: include/linux/dma/dw.h
- F: include/linux/platform_data/dma-dw.h
--F: drivers/dma/dw/
-
- SYNOPSYS DESIGNWARE ENTERPRISE ETHERNET DRIVER
- M: Jose Abreu <Jose.Abreu@synopsys.com>
---- /dev/null
-+++ b/include/dt-bindings/dma/dw-dmac.h
-@@ -0,0 +1,14 @@
-+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
-+
-+#ifndef __DT_BINDINGS_DMA_DW_DMAC_H__
-+#define __DT_BINDINGS_DMA_DW_DMAC_H__
-+
-+/*
-+ * Protection Control bits provide protection against illegal transactions.
-+ * The protection bits[0:2] are one-to-one mapped to AHB HPROT[3:1] signals.
-+ */
-+#define DW_DMAC_HPROT1_PRIVILEGED_MODE (1 << 0) /* Privileged Mode */
-+#define DW_DMAC_HPROT2_BUFFERABLE (1 << 1) /* DMA is bufferable */
-+#define DW_DMAC_HPROT3_CACHEABLE (1 << 2) /* DMA is cacheable */
-+
-+#endif /* __DT_BINDINGS_DMA_DW_DMAC_H__ */
diff --git a/target/linux/apm821xx/patches-4.19/023-0003-crypto-drop-mask-CRYPTO_ALG_ASYNC-from-cipher-tfm-al.patch b/target/linux/apm821xx/patches-4.19/023-0003-crypto-drop-mask-CRYPTO_ALG_ASYNC-from-cipher-tfm-al.patch
deleted file mode 100644
index 36aeb33d59..0000000000
--- a/target/linux/apm821xx/patches-4.19/023-0003-crypto-drop-mask-CRYPTO_ALG_ASYNC-from-cipher-tfm-al.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 1ad0f1603a6b2afb62a1c065409aaa4e43ca7627 Mon Sep 17 00:00:00 2001
-From: Eric Biggers <ebiggers@google.com>
-Date: Wed, 14 Nov 2018 12:19:39 -0800
-Subject: [PATCH 03/15] crypto: drop mask=CRYPTO_ALG_ASYNC from 'cipher' tfm
- allocations
-
-'cipher' algorithms (single block ciphers) are always synchronous, so
-passing CRYPTO_ALG_ASYNC in the mask to crypto_alloc_cipher() has no
-effect. Many users therefore already don't pass it, but some still do.
-This inconsistency can cause confusion, especially since the way the
-'mask' argument works is somewhat counterintuitive.
-
-Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags.
-
-This patch shouldn't change any actual behavior.
-
-Signed-off-by: Eric Biggers <ebiggers@google.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/amcc/crypto4xx_alg.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/crypto/amcc/crypto4xx_alg.c
-+++ b/drivers/crypto/amcc/crypto4xx_alg.c
-@@ -540,8 +540,7 @@ static int crypto4xx_compute_gcm_hash_ke
- uint8_t src[16] = { 0 };
- int rc = 0;
-
-- aes_tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC |
-- CRYPTO_ALG_NEED_FALLBACK);
-+ aes_tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_NEED_FALLBACK);
- if (IS_ERR(aes_tfm)) {
- rc = PTR_ERR(aes_tfm);
- pr_warn("could not load aes cipher driver: %d\n", rc);
diff --git a/target/linux/apm821xx/patches-4.19/023-0004-crypto4xx_core-don-t-abuse-__dma_sync_page.patch b/target/linux/apm821xx/patches-4.19/023-0004-crypto4xx_core-don-t-abuse-__dma_sync_page.patch
deleted file mode 100644
index d1849aefbb..0000000000
--- a/target/linux/apm821xx/patches-4.19/023-0004-crypto4xx_core-don-t-abuse-__dma_sync_page.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 67d8208fba1324fa0198f9fc58a9edbe09596947 Mon Sep 17 00:00:00 2001
-From: Christoph Hellwig <hch@lst.de>
-Date: Sun, 16 Dec 2018 18:19:46 +0100
-Subject: [PATCH 04/15] crypto4xx_core: don't abuse __dma_sync_page
-
-This function is internal to the DMA API implementation. Instead use
-the DMA API to properly unmap. Note that the DMA API usage in this
-driver is a disaster and urgently needs some work - it is missing all
-the unmaps, seems to do a secondary map where it looks like it should
-to a unmap in one place to work around cache coherency and the
-directions passed in seem to be partially wrong.
-
-Signed-off-by: Christoph Hellwig <hch@lst.de>
-Tested-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
----
- drivers/crypto/amcc/crypto4xx_core.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -592,7 +592,7 @@ static void crypto4xx_aead_done(struct c
- pd->pd_ctl_len.bf.pkt_len,
- dst);
- } else {
-- __dma_sync_page(sg_page(dst), dst->offset, dst->length,
-+ dma_unmap_page(dev->core_dev->device, pd->dest, dst->length,
- DMA_FROM_DEVICE);
- }
-
diff --git a/target/linux/apm821xx/patches-4.19/023-0005-cross-tree-phase-out-dma_zalloc_coherent.patch b/target/linux/apm821xx/patches-4.19/023-0005-cross-tree-phase-out-dma_zalloc_coherent.patch
deleted file mode 100644
index 857578bb93..0000000000
--- a/target/linux/apm821xx/patches-4.19/023-0005-cross-tree-phase-out-dma_zalloc_coherent.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 750afb08ca71310fcf0c4e2cb1565c63b8235b60 Mon Sep 17 00:00:00 2001
-From: Luis Chamberlain <mcgrof@kernel.org>
-Date: Fri, 4 Jan 2019 09:23:09 +0100
-Subject: [PATCH 05/15] cross-tree: phase out dma_zalloc_coherent()
-
-We already need to zero out memory for dma_alloc_coherent(), as such
-using dma_zalloc_coherent() is superflous. Phase it out.
-
-This change was generated with the following Coccinelle SmPL patch:
-
-@ replace_dma_zalloc_coherent @
-expression dev, size, data, handle, flags;
-@@
-
--dma_zalloc_coherent(dev, size, handle, flags)
-+dma_alloc_coherent(dev, size, handle, flags)
-
-Suggested-by: Christoph Hellwig <hch@lst.de>
-Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
-[hch: re-ran the script on the latest tree]
-Signed-off-by: Christoph Hellwig <hch@lst.de>
----
- drivers/crypto/amcc/crypto4xx_core.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -283,9 +283,9 @@ static u32 crypto4xx_put_pd_to_pdr(struc
- */
- static u32 crypto4xx_build_gdr(struct crypto4xx_device *dev)
- {
-- dev->gdr = dma_zalloc_coherent(dev->core_dev->device,
-- sizeof(struct ce_gd) * PPC4XX_NUM_GD,
-- &dev->gdr_pa, GFP_ATOMIC);
-+ dev->gdr = dma_alloc_coherent(dev->core_dev->device,
-+ sizeof(struct ce_gd) * PPC4XX_NUM_GD,
-+ &dev->gdr_pa, GFP_ATOMIC);
- if (!dev->gdr)
- return -ENOMEM;
-
diff --git a/target/linux/apm821xx/patches-4.19/023-0006-crypto-crypto4xx-add-prng-crypto-support.patch b/target/linux/apm821xx/patches-4.19/023-0006-crypto-crypto4xx-add-prng-crypto-support.patch
deleted file mode 100644
index cf7f92c2d0..0000000000
--- a/target/linux/apm821xx/patches-4.19/023-0006-crypto-crypto4xx-add-prng-crypto-support.patch
+++ /dev/null
@@ -1,199 +0,0 @@
-From d072bfa4885354fff86aa1fb1dbc4f1533c9e0bf Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 23 Dec 2018 02:16:13 +0100
-Subject: [PATCH 06/15] crypto: crypto4xx - add prng crypto support
-
-This patch adds support for crypto4xx's ANSI X9.17 Annex C compliant
-pseudo random number generator which provides a pseudo random source
-for the purpose of generating Initialization Vectors (IV's) for AES
-algorithms to the Packet Engine and other pseudo random number
-requirements.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/amcc/crypto4xx_core.c | 87 +++++++++++++++++++++++++
- drivers/crypto/amcc/crypto4xx_core.h | 4 ++
- drivers/crypto/amcc/crypto4xx_reg_def.h | 1 +
- 3 files changed, 92 insertions(+)
-
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -40,9 +40,11 @@
- #include <crypto/ctr.h>
- #include <crypto/gcm.h>
- #include <crypto/sha.h>
-+#include <crypto/rng.h>
- #include <crypto/scatterwalk.h>
- #include <crypto/skcipher.h>
- #include <crypto/internal/aead.h>
-+#include <crypto/internal/rng.h>
- #include <crypto/internal/skcipher.h>
- #include "crypto4xx_reg_def.h"
- #include "crypto4xx_core.h"
-@@ -1042,6 +1044,10 @@ static int crypto4xx_register_alg(struct
- rc = crypto_register_ahash(&alg->alg.u.hash);
- break;
-
-+ case CRYPTO_ALG_TYPE_RNG:
-+ rc = crypto_register_rng(&alg->alg.u.rng);
-+ break;
-+
- default:
- rc = crypto_register_skcipher(&alg->alg.u.cipher);
- break;
-@@ -1071,6 +1077,10 @@ static void crypto4xx_unregister_alg(str
- crypto_unregister_aead(&alg->alg.u.aead);
- break;
-
-+ case CRYPTO_ALG_TYPE_RNG:
-+ crypto_unregister_rng(&alg->alg.u.rng);
-+ break;
-+
- default:
- crypto_unregister_skcipher(&alg->alg.u.cipher);
- }
-@@ -1129,6 +1139,69 @@ static irqreturn_t crypto4xx_ce_interrup
- PPC4XX_TMO_ERR_INT);
- }
-
-+static int ppc4xx_prng_data_read(struct crypto4xx_device *dev,
-+ u8 *data, unsigned int max)
-+{
-+ unsigned int i, curr = 0;
-+ u32 val[2];
-+
-+ do {
-+ /* trigger PRN generation */
-+ writel(PPC4XX_PRNG_CTRL_AUTO_EN,
-+ dev->ce_base + CRYPTO4XX_PRNG_CTRL);
-+
-+ for (i = 0; i < 1024; i++) {
-+ /* usually 19 iterations are enough */
-+ if ((readl(dev->ce_base + CRYPTO4XX_PRNG_STAT) &
-+ CRYPTO4XX_PRNG_STAT_BUSY))
-+ continue;
-+
-+ val[0] = readl_be(dev->ce_base + CRYPTO4XX_PRNG_RES_0);
-+ val[1] = readl_be(dev->ce_base + CRYPTO4XX_PRNG_RES_1);
-+ break;
-+ }
-+ if (i == 1024)
-+ return -ETIMEDOUT;
-+
-+ if ((max - curr) >= 8) {
-+ memcpy(data, &val, 8);
-+ data += 8;
-+ curr += 8;
-+ } else {
-+ /* copy only remaining bytes */
-+ memcpy(data, &val, max - curr);
-+ break;
-+ }
-+ } while (curr < max);
-+
-+ return curr;
-+}
-+
-+static int crypto4xx_prng_generate(struct crypto_rng *tfm,
-+ const u8 *src, unsigned int slen,
-+ u8 *dstn, unsigned int dlen)
-+{
-+ struct rng_alg *alg = crypto_rng_alg(tfm);
-+ struct crypto4xx_alg *amcc_alg;
-+ struct crypto4xx_device *dev;
-+ int ret;
-+
-+ amcc_alg = container_of(alg, struct crypto4xx_alg, alg.u.rng);
-+ dev = amcc_alg->dev;
-+
-+ mutex_lock(&dev->core_dev->rng_lock);
-+ ret = ppc4xx_prng_data_read(dev, dstn, dlen);
-+ mutex_unlock(&dev->core_dev->rng_lock);
-+ return ret;
-+}
-+
-+
-+static int crypto4xx_prng_seed(struct crypto_rng *tfm, const u8 *seed,
-+ unsigned int slen)
-+{
-+ return 0;
-+}
-+
- /**
- * Supported Crypto Algorithms
- */
-@@ -1298,6 +1371,18 @@ static struct crypto4xx_alg_common crypt
- .cra_module = THIS_MODULE,
- },
- } },
-+ { .type = CRYPTO_ALG_TYPE_RNG, .u.rng = {
-+ .base = {
-+ .cra_name = "stdrng",
-+ .cra_driver_name = "crypto4xx_rng",
-+ .cra_priority = 300,
-+ .cra_ctxsize = 0,
-+ .cra_module = THIS_MODULE,
-+ },
-+ .generate = crypto4xx_prng_generate,
-+ .seed = crypto4xx_prng_seed,
-+ .seedsize = 0,
-+ } },
- };
-
- /**
-@@ -1367,6 +1452,7 @@ static int crypto4xx_probe(struct platfo
- core_dev->dev->core_dev = core_dev;
- core_dev->dev->is_revb = is_revb;
- core_dev->device = dev;
-+ mutex_init(&core_dev->rng_lock);
- spin_lock_init(&core_dev->lock);
- INIT_LIST_HEAD(&core_dev->dev->alg_list);
- ratelimit_default_init(&core_dev->dev->aead_ratelimit);
-@@ -1446,6 +1532,7 @@ static int crypto4xx_remove(struct platf
- tasklet_kill(&core_dev->tasklet);
- /* Un-register with Linux CryptoAPI */
- crypto4xx_unregister_alg(core_dev->dev);
-+ mutex_destroy(&core_dev->rng_lock);
- /* Free all allocated memory */
- crypto4xx_stop_all(core_dev);
-
---- a/drivers/crypto/amcc/crypto4xx_core.h
-+++ b/drivers/crypto/amcc/crypto4xx_core.h
-@@ -23,8 +23,10 @@
- #define __CRYPTO4XX_CORE_H__
-
- #include <linux/ratelimit.h>
-+#include <linux/mutex.h>
- #include <crypto/internal/hash.h>
- #include <crypto/internal/aead.h>
-+#include <crypto/internal/rng.h>
- #include <crypto/internal/skcipher.h>
- #include "crypto4xx_reg_def.h"
- #include "crypto4xx_sa.h"
-@@ -119,6 +121,7 @@ struct crypto4xx_core_device {
- u32 irq;
- struct tasklet_struct tasklet;
- spinlock_t lock;
-+ struct mutex rng_lock;
- };
-
- struct crypto4xx_ctx {
-@@ -143,6 +146,7 @@ struct crypto4xx_alg_common {
- struct skcipher_alg cipher;
- struct ahash_alg hash;
- struct aead_alg aead;
-+ struct rng_alg rng;
- } u;
- };
-
---- a/drivers/crypto/amcc/crypto4xx_reg_def.h
-+++ b/drivers/crypto/amcc/crypto4xx_reg_def.h
-@@ -100,6 +100,7 @@
- #define CRYPTO4XX_ENDIAN_CFG 0x000600d8
-
- #define CRYPTO4XX_PRNG_STAT 0x00070000
-+#define CRYPTO4XX_PRNG_STAT_BUSY 0x1
- #define CRYPTO4XX_PRNG_CTRL 0x00070004
- #define CRYPTO4XX_PRNG_SEED_L 0x00070008
- #define CRYPTO4XX_PRNG_SEED_H 0x0007000c
diff --git a/target/linux/apm821xx/patches-4.19/023-0012-crypto-crypto4xx-get-rid-of-redundant-using_sd-varia.patch b/target/linux/apm821xx/patches-4.19/023-0012-crypto-crypto4xx-get-rid-of-redundant-using_sd-varia.patch
deleted file mode 100644
index 24e34edd58..0000000000
--- a/target/linux/apm821xx/patches-4.19/023-0012-crypto-crypto4xx-get-rid-of-redundant-using_sd-varia.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 38cf5533d7a876f75088bacc1277046f30005f28 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Mon, 22 Apr 2019 13:26:01 +0200
-Subject: [PATCH 12/15] crypto: crypto4xx - get rid of redundant using_sd
- variable
-
-using_sd is used as a stand-in for sa_command_0.bf.scatter
-that we need to set anyway, so we might as well just prevent
-double-accounting.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/amcc/crypto4xx_core.c | 6 ++----
- drivers/crypto/amcc/crypto4xx_core.h | 1 -
- 2 files changed, 2 insertions(+), 5 deletions(-)
-
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -535,7 +535,7 @@ static void crypto4xx_cipher_done(struct
-
- req = skcipher_request_cast(pd_uinfo->async_req);
-
-- if (pd_uinfo->using_sd) {
-+ if (pd_uinfo->sa_va->sa_command_0.bf.scatter) {
- crypto4xx_copy_pkt_to_dst(dev, pd, pd_uinfo,
- req->cryptlen, req->dst);
- } else {
-@@ -589,7 +589,7 @@ static void crypto4xx_aead_done(struct c
- u32 icv[AES_BLOCK_SIZE];
- int err = 0;
-
-- if (pd_uinfo->using_sd) {
-+ if (pd_uinfo->sa_va->sa_command_0.bf.scatter) {
- crypto4xx_copy_pkt_to_dst(dev, pd, pd_uinfo,
- pd->pd_ctl_len.bf.pkt_len,
- dst);
-@@ -883,7 +883,6 @@ int crypto4xx_build_pd(struct crypto_asy
- * we know application give us dst a whole piece of memory
- * no need to use scatter ring.
- */
-- pd_uinfo->using_sd = 0;
- pd_uinfo->first_sd = 0xffffffff;
- sa->sa_command_0.bf.scatter = 0;
- pd->dest = (u32)dma_map_page(dev->core_dev->device,
-@@ -897,7 +896,6 @@ int crypto4xx_build_pd(struct crypto_asy
- u32 sd_idx = fst_sd;
- nbytes = datalen;
- sa->sa_command_0.bf.scatter = 1;
-- pd_uinfo->using_sd = 1;
- pd_uinfo->first_sd = fst_sd;
- sd = crypto4xx_get_sdp(dev, &sd_dma, sd_idx);
- pd->dest = sd_dma;
---- a/drivers/crypto/amcc/crypto4xx_core.h
-+++ b/drivers/crypto/amcc/crypto4xx_core.h
-@@ -64,7 +64,6 @@ union shadow_sa_buf {
- struct pd_uinfo {
- struct crypto4xx_device *dev;
- u32 state;
-- u32 using_sd;
- u32 first_gd; /* first gather discriptor
- used by this packet */
- u32 num_gd; /* number of gather discriptor
diff --git a/target/linux/apm821xx/patches-4.19/140-GPIO-add-named-gpio-exports.patch b/target/linux/apm821xx/patches-4.19/140-GPIO-add-named-gpio-exports.patch
deleted file mode 100644
index 8e3060d768..0000000000
--- a/target/linux/apm821xx/patches-4.19/140-GPIO-add-named-gpio-exports.patch
+++ /dev/null
@@ -1,169 +0,0 @@
-From cc809a441d8f2924f785eb863dfa6aef47a25b0b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 12 Aug 2014 20:49:27 +0200
-Subject: [PATCH 30/36] GPIO: add named gpio exports
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++
- drivers/gpio/gpiolib.c | 11 +++++--
- include/asm-generic/gpio.h | 5 +++
- include/linux/gpio/consumer.h | 8 +++++
- 4 files changed, 90 insertions(+), 2 deletions(-)
-
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -23,6 +23,8 @@
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/slab.h>
- #include <linux/gpio/machine.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-
- #include "gpiolib.h"
-
-@@ -660,3 +662,72 @@ void of_gpiochip_remove(struct gpio_chip
- gpiochip_remove_pin_ranges(chip);
- of_node_put(chip->of_node);
- }
-+
-+#ifdef CONFIG_GPIO_SYSFS
-+
-+static struct of_device_id gpio_export_ids[] = {
-+ { .compatible = "gpio-export" },
-+ { /* sentinel */ }
-+};
-+
-+static int of_gpio_export_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct device_node *cnp;
-+ u32 val;
-+ int nb = 0;
-+
-+ for_each_child_of_node(np, cnp) {
-+ const char *name = NULL;
-+ int gpio;
-+ bool dmc;
-+ int max_gpio = 1;
-+ int i;
-+
-+ of_property_read_string(cnp, "gpio-export,name", &name);
-+
-+ if (!name)
-+ max_gpio = of_gpio_count(cnp);
-+
-+ for (i = 0; i < max_gpio; i++) {
-+ unsigned flags = 0;
-+ enum of_gpio_flags of_flags;
-+
-+ gpio = of_get_gpio_flags(cnp, i, &of_flags);
-+ if (!gpio_is_valid(gpio))
-+ return gpio;
-+
-+ if (of_flags == OF_GPIO_ACTIVE_LOW)
-+ flags |= GPIOF_ACTIVE_LOW;
-+
-+ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
-+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-+ else
-+ flags |= GPIOF_IN;
-+
-+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
-+ continue;
-+
-+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
-+ gpio_export_with_name(gpio, dmc, name);
-+ nb++;
-+ }
-+ }
-+
-+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver gpio_export_driver = {
-+ .driver = {
-+ .name = "gpio-export",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(gpio_export_ids),
-+ },
-+ .probe = of_gpio_export_probe,
-+};
-+
-+module_platform_driver(gpio_export_driver);
-+
-+#endif
---- a/include/asm-generic/gpio.h
-+++ b/include/asm-generic/gpio.h
-@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g
- return gpiod_export(gpio_to_desc(gpio), direction_may_change);
- }
-
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
-+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
-+{
-+ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
-+}
-+
- static inline int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
- {
---- a/include/linux/gpio/consumer.h
-+++ b/include/linux/gpio/consumer.h
-@@ -533,6 +533,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_
-
- #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
-
-+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
- int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
- int gpiod_export_link(struct device *dev, const char *name,
- struct gpio_desc *desc);
-@@ -540,6 +541,13 @@ void gpiod_unexport(struct gpio_desc *de
-
- #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
-
-+static inline int _gpiod_export(struct gpio_desc *desc,
-+ bool direction_may_change,
-+ const char *name)
-+{
-+ return -ENOSYS;
-+}
-+
- static inline int gpiod_export(struct gpio_desc *desc,
- bool direction_may_change)
- {
---- a/drivers/gpio/gpiolib-sysfs.c
-+++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -568,7 +568,7 @@ static struct class gpio_class = {
- *
- * Returns zero on success, else an error.
- */
--int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
- {
- struct gpio_chip *chip;
- struct gpio_device *gdev;
-@@ -630,6 +630,8 @@ int gpiod_export(struct gpio_desc *desc,
- offset = gpio_chip_hwgpio(desc);
- if (chip->names && chip->names[offset])
- ioname = chip->names[offset];
-+ if (name)
-+ ioname = name;
-
- dev = device_create_with_groups(&gpio_class, &gdev->dev,
- MKDEV(0, 0), data, gpio_groups,
-@@ -651,6 +653,12 @@ err_unlock:
- gpiod_dbg(desc, "%s: status %d\n", __func__, status);
- return status;
- }
-+EXPORT_SYMBOL_GPL(__gpiod_export);
-+
-+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+{
-+ return __gpiod_export(desc, direction_may_change, NULL);
-+}
- EXPORT_SYMBOL_GPL(gpiod_export);
-
- static int match_export(struct device *dev, const void *desc)
diff --git a/target/linux/apm821xx/patches-4.19/201-add-amcc-apollo3g-support.patch b/target/linux/apm821xx/patches-4.19/201-add-amcc-apollo3g-support.patch
deleted file mode 100644
index 18f4c72de8..0000000000
--- a/target/linux/apm821xx/patches-4.19/201-add-amcc-apollo3g-support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/powerpc/platforms/44x/Kconfig
-+++ b/arch/powerpc/platforms/44x/Kconfig
-@@ -131,6 +131,17 @@ config CANYONLANDS
- help
- This option enables support for the AMCC PPC460EX evaluation board.
-
-+config APOLLO3G
-+ bool "Apollo3G"
-+ depends on 44x
-+ default n
-+ select PPC44x_SIMPLE
-+ select APM821xx
-+ select IBM_EMAC_RGMII
-+ select 460EX
-+ help
-+ This option enables support for the AMCC Apollo 3G board.
-+
- config GLACIER
- bool "Glacier"
- depends on 44x
---- a/arch/powerpc/platforms/44x/ppc44x_simple.c
-+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
-@@ -50,6 +50,7 @@ machine_device_initcall(ppc44x_simple, p
- * board.c file for it rather than adding it to this list.
- */
- static char *board[] __initdata = {
-+ "amcc,apollo3g",
- "amcc,arches",
- "amcc,bamboo",
- "apm,bluestone",
diff --git a/target/linux/apm821xx/patches-4.19/202-add-netgear-wndr4700-support.patch b/target/linux/apm821xx/patches-4.19/202-add-netgear-wndr4700-support.patch
deleted file mode 100644
index 536a74ef00..0000000000
--- a/target/linux/apm821xx/patches-4.19/202-add-netgear-wndr4700-support.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/powerpc/platforms/44x/Makefile
-+++ b/arch/powerpc/platforms/44x/Makefile
-@@ -4,6 +4,7 @@ ifneq ($(CONFIG_PPC4xx_CPM),y)
- obj-y += idle.o
- endif
- obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
-+obj-$(CONFIG_WNDR4700) += wndr4700.o
- obj-$(CONFIG_EBONY) += ebony.o
- obj-$(CONFIG_SAM440EP) += sam440ep.o
- obj-$(CONFIG_WARP) += warp.o
---- a/arch/powerpc/platforms/44x/Kconfig
-+++ b/arch/powerpc/platforms/44x/Kconfig
-@@ -260,6 +260,19 @@ config ICON
- help
- This option enables support for the AMCC PPC440SPe evaluation board.
-
-+config WNDR4700
-+ bool "WNDR4700"
-+ depends on 44x
-+ default n
-+ select APM821xx
-+ select PCI_MSI
-+ select PPC4xx_MSI
-+ select PPC4xx_PCI_EXPRESS
-+ select IBM_EMAC_RGMII
-+ select 460EX
-+ help
-+ This option enables support for the Netgear WNDR4700/WNDR4720 board.
-+
- config XILINX_VIRTEX440_GENERIC_BOARD
- bool "Generic Xilinx Virtex 5 FXT board support"
- depends on 44x
diff --git a/target/linux/apm821xx/patches-4.19/300-fix-atheros-nics-on-apm82181.patch b/target/linux/apm821xx/patches-4.19/300-fix-atheros-nics-on-apm82181.patch
deleted file mode 100644
index 110726d258..0000000000
--- a/target/linux/apm821xx/patches-4.19/300-fix-atheros-nics-on-apm82181.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/powerpc/platforms/4xx/pci.c
-+++ b/arch/powerpc/platforms/4xx/pci.c
-@@ -1060,15 +1060,24 @@ static int __init apm821xx_pciex_init_po
- u32 val;
-
- /*
-- * Do a software reset on PCIe ports.
-- * This code is to fix the issue that pci drivers doesn't re-assign
-- * bus number for PCIE devices after Uboot
-- * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
-- * PT quad port, SAS LSI 1064E)
-+ * Only reset the PHY when no link is currently established.
-+ * This is for the Atheros PCIe board which has problems to establish
-+ * the link (again) after this PHY reset. All other currently tested
-+ * PCIe boards don't show this problem.
- */
--
-- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
-- mdelay(10);
-+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
-+ if (!(val & 0x00001000)) {
-+ /*
-+ * Do a software reset on PCIe ports.
-+ * This code is to fix the issue that pci drivers doesn't re-assign
-+ * bus number for PCIE devices after Uboot
-+ * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
-+ * PT quad port, SAS LSI 1064E)
-+ */
-+
-+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
-+ mdelay(10);
-+ }
-
- if (port->endpoint)
- val = PTYPE_LEGACY_ENDPOINT << 20;
-@@ -1085,9 +1094,12 @@ static int __init apm821xx_pciex_init_po
- mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
- mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
-
-- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
-- mdelay(50);
-- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
-+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
-+ if (!(val & 0x00001000)) {
-+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
-+ mdelay(50);
-+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
-+ }
-
- mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
- mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
diff --git a/target/linux/apm821xx/patches-4.19/301-fix-memory-map-wndr4700.patch b/target/linux/apm821xx/patches-4.19/301-fix-memory-map-wndr4700.patch
deleted file mode 100644
index 0c9fb370f1..0000000000
--- a/target/linux/apm821xx/patches-4.19/301-fix-memory-map-wndr4700.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/arch/powerpc/platforms/4xx/pci.c
-+++ b/arch/powerpc/platforms/4xx/pci.c
-@@ -1903,9 +1903,9 @@ static void __init ppc4xx_configure_pcie
- * if it works
- */
- out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
-- out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
-+ out_le32(mbase + PECFG_PIM0LAH, 0x00000008);
- out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
-- out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
-+ out_le32(mbase + PECFG_PIM1LAH, 0x0000000c);
- out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
- out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
-
diff --git a/target/linux/apm821xx/patches-4.19/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch b/target/linux/apm821xx/patches-4.19/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
deleted file mode 100644
index e5000c911f..0000000000
--- a/target/linux/apm821xx/patches-4.19/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
+++ /dev/null
@@ -1,545 +0,0 @@
-From 419992bae5aaa4e06402e0b7c79fcf7bcb6b4764 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@googlemail.com>
-Date: Thu, 2 Jun 2016 00:48:46 +0200
-Subject: [PATCH] usb: xhci: add firmware loader for uPD720201 and uPD720202
- w/o ROM
-
-This patch adds a firmware loader for the uPD720201K8-711-BAC-A
-and uPD720202K8-711-BAA-A variant. Both of these chips are listed
-in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as
-devices which need the firmware loader on page 2 in order to
-work as they "do not support the External ROM".
-
-The "Firmware Download Sequence" is describe in chapter
-"7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
-
-The firmware "K2013080.mem" is available from a USB3.0 Host to
-PCIe Adapter (PP2U-E card) "Firmware download" archive. An
-alternative version can be sourced from Netgear's WNDR4700 GPL
-archives.
-
-The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3
-(2012-06-15) state that the firmware is for the following devices:
- - uPD720201 ES 2.0 sample whose revision ID is 2.
- - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
- - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
-
-If someone from Renesas is listening: It would be great, if these
-firmwares could be added to linux-firmware.git.
-
-Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
-Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
----
- drivers/usb/host/xhci-pci.c | 492 ++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 492 insertions(+)
-
---- a/drivers/usb/host/xhci-pci.c
-+++ b/drivers/usb/host/xhci-pci.c
-@@ -12,6 +12,8 @@
- #include <linux/slab.h>
- #include <linux/module.h>
- #include <linux/acpi.h>
-+#include <linux/firmware.h>
-+#include <asm/unaligned.h>
-
- #include "xhci.h"
- #include "xhci-trace.h"
-@@ -268,6 +270,458 @@ static void xhci_pme_acpi_rtd3_enable(st
- static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
- #endif /* CONFIG_ACPI */
-
-+static const struct renesas_fw_entry {
-+ const char *firmware_name;
-+ u16 device;
-+ u8 revision;
-+ u16 expected_version;
-+} renesas_fw_table[] = {
-+ /*
-+ * Only the uPD720201K8-711-BAC-A or uPD720202K8-711-BAA-A
-+ * are listed in R19UH0078EJ0500 Rev.5.00 as devices which
-+ * need the software loader.
-+ *
-+ * PP2U/ReleaseNote_USB3-201-202-FW.txt:
-+ *
-+ * Note: This firmware is for the following devices.
-+ * - uPD720201 ES 2.0 sample whose revision ID is 2.
-+ * - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
-+ * - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
-+ */
-+ { "K2013080.mem", 0x0014, 0x02, 0x2013 },
-+ { "K2013080.mem", 0x0014, 0x03, 0x2013 },
-+ { "K2013080.mem", 0x0015, 0x02, 0x2013 },
-+};
-+
-+static const struct renesas_fw_entry *renesas_needs_fw_dl(struct pci_dev *dev)
-+{
-+ const struct renesas_fw_entry *entry;
-+ size_t i;
-+
-+ /* This loader will only work with a RENESAS device. */
-+ if (!(dev->vendor == PCI_VENDOR_ID_RENESAS))
-+ return NULL;
-+
-+ for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) {
-+ entry = &renesas_fw_table[i];
-+ if (entry->device == dev->device &&
-+ entry->revision == dev->revision)
-+ return entry;
-+ }
-+
-+ return NULL;
-+}
-+
-+static int renesas_fw_download_image(struct pci_dev *dev,
-+ const u32 *fw,
-+ size_t step)
-+{
-+ size_t i;
-+ int err;
-+ u8 fw_status;
-+ bool data0_or_data1;
-+
-+ /*
-+ * The hardware does alternate between two 32-bit pages.
-+ * (This is because each row of the firmware is 8 bytes).
-+ *
-+ * for even steps we use DATA0, for odd steps DATA1.
-+ */
-+ data0_or_data1 = (step & 1) == 1;
-+
-+ /* step+1. Read "Set DATAX" and confirm it is cleared. */
-+ for (i = 0; i < 10000; i++) {
-+ err = pci_read_config_byte(dev, 0xF5, &fw_status);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+ if (!(fw_status & BIT(data0_or_data1)))
-+ break;
-+
-+ udelay(1);
-+ }
-+ if (i == 10000)
-+ return -ETIMEDOUT;
-+
-+ /*
-+ * step+2. Write FW data to "DATAX".
-+ * "LSB is left" => force little endian
-+ */
-+ err = pci_write_config_dword(dev, data0_or_data1 ? 0xFC : 0xF8,
-+ (__force u32) cpu_to_le32(fw[step]));
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ udelay(100);
-+
-+ /* step+3. Set "Set DATAX". */
-+ err = pci_write_config_byte(dev, 0xF5, BIT(data0_or_data1));
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ return 0;
-+}
-+
-+static int renesas_fw_verify(struct pci_dev *dev,
-+ const void *fw_data,
-+ size_t length)
-+{
-+ const struct renesas_fw_entry *entry = renesas_needs_fw_dl(dev);
-+ u16 fw_version_pointer;
-+ u16 fw_version;
-+
-+ if (!entry)
-+ return -EINVAL;
-+
-+ /*
-+ * The Firmware's Data Format is describe in
-+ * "6.3 Data Format" R19UH0078EJ0500 Rev.5.00 page 124
-+ */
-+
-+ /* "Each row is 8 bytes". => firmware size must be a multiple of 8. */
-+ if (length % 8 != 0) {
-+ dev_err(&dev->dev, "firmware size is not a multipe of 8.");
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * The bootrom chips of the big brother have sizes up to 64k, let's
-+ * assume that's the biggest the firmware can get.
-+ */
-+ if (length < 0x1000 || length >= 0x10000) {
-+ dev_err(&dev->dev, "firmware is size %zd is not (4k - 64k).",
-+ length);
-+ return -EINVAL;
-+ }
-+
-+ /* The First 2 bytes are fixed value (55aa). "LSB on Left" */
-+ if (get_unaligned_le16(fw_data) != 0x55aa) {
-+ dev_err(&dev->dev, "no valid firmware header found.");
-+ return -EINVAL;
-+ }
-+
-+ /* verify the firmware version position and print it. */
-+ fw_version_pointer = get_unaligned_le16(fw_data + 4);
-+ if (fw_version_pointer + 2 >= length) {
-+ dev_err(&dev->dev, "firmware version pointer is outside of the firmware image.");
-+ return -EINVAL;
-+ }
-+
-+ fw_version = get_unaligned_le16(fw_data + fw_version_pointer);
-+ dev_dbg(&dev->dev, "got firmware version: %02x.", fw_version);
-+
-+ if (fw_version != entry->expected_version) {
-+ dev_err(&dev->dev, "firmware version mismatch, expected version: %02x.",
-+ entry->expected_version);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static int renesas_fw_check_running(struct pci_dev *pdev)
-+{
-+ int err;
-+ u8 fw_state;
-+
-+ /*
-+ * Test if the device is actually needing the firmware. As most
-+ * BIOSes will initialize the device for us. If the device is
-+ * initialized.
-+ */
-+ err = pci_read_config_byte(pdev, 0xF4, &fw_state);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ /*
-+ * Check if "FW Download Lock" is locked. If it is and the FW is
-+ * ready we can simply continue. If the FW is not ready, we have
-+ * to give up.
-+ */
-+ if (fw_state & BIT(1)) {
-+ dev_dbg(&pdev->dev, "FW Download Lock is engaged.");
-+
-+ if (fw_state & BIT(4))
-+ return 0;
-+
-+ dev_err(&pdev->dev, "FW Download Lock is set and FW is not ready. Giving Up.");
-+ return -EIO;
-+ }
-+
-+ /*
-+ * Check if "FW Download Enable" is set. If someone (us?) tampered
-+ * with it and it can't be resetted, we have to give up too... and
-+ * ask for a forgiveness and a reboot.
-+ */
-+ if (fw_state & BIT(0)) {
-+ dev_err(&pdev->dev, "FW Download Enable is stale. Giving Up (poweroff/reboot needed).");
-+ return -EIO;
-+ }
-+
-+ /* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */
-+ switch ((fw_state & 0x70)) {
-+ case 0: /* No result yet */
-+ dev_dbg(&pdev->dev, "FW is not ready/loaded yet.");
-+
-+ /* tell the caller, that this device needs the firmware. */
-+ return 1;
-+
-+ case BIT(4): /* Success, device should be working. */
-+ dev_dbg(&pdev->dev, "FW is ready.");
-+ return 0;
-+
-+ case BIT(5): /* Error State */
-+ dev_err(&pdev->dev, "hardware is in an error state. Giving up (poweroff/reboot needed).");
-+ return -ENODEV;
-+
-+ default: /* All other states are marked as "Reserved states" */
-+ dev_err(&pdev->dev, "hardware is in an invalid state %x. Giving up (poweroff/reboot needed).",
-+ (fw_state & 0x70) >> 4);
-+ return -EINVAL;
-+ }
-+}
-+
-+static int renesas_hw_check_run_stop_busy(struct pci_dev *pdev)
-+{
-+#if 0
-+ u32 val;
-+
-+ /*
-+ * 7.1.3 Note 3: "... must not set 'FW Download Enable' when
-+ * 'RUN/STOP' of USBCMD Register is set"
-+ */
-+ val = readl(hcd->regs + 0x20);
-+ if (val & BIT(0)) {
-+ dev_err(&pdev->dev, "hardware is busy and can't receive a FW.");
-+ return -EBUSY;
-+ }
-+#endif
-+ return 0;
-+}
-+
-+static int renesas_fw_download(struct pci_dev *pdev,
-+ const struct firmware *fw, unsigned int retry_counter)
-+{
-+ const u32 *fw_data = (const u32 *) fw->data;
-+ size_t i;
-+ int err;
-+ u8 fw_status;
-+
-+ /*
-+ * For more information and the big picture: please look at the
-+ * "Firmware Download Sequence" in "7.1 FW Download Interface"
-+ * of R19UH0078EJ0500 Rev.5.00 page 131
-+ */
-+ err = renesas_hw_check_run_stop_busy(pdev);
-+ if (err)
-+ return err;
-+
-+ /*
-+ * 0. Set "FW Download Enable" bit in the
-+ * "FW Download Control & Status Register" at 0xF4
-+ */
-+ err = pci_write_config_byte(pdev, 0xF4, BIT(0));
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ /* 1 - 10 follow one step after the other. */
-+ for (i = 0; i < fw->size / 4; i++) {
-+ err = renesas_fw_download_image(pdev, fw_data, i);
-+ if (err) {
-+ dev_err(&pdev->dev, "Firmware Download Step %zd failed at position %zd bytes with (%d).",
-+ i, i * 4, err);
-+ return err;
-+ }
-+ }
-+
-+ /*
-+ * This sequence continues until the last data is written to
-+ * "DATA0" or "DATA1". Naturally, we wait until "SET DATA0/1"
-+ * is cleared by the hardware beforehand.
-+ */
-+ for (i = 0; i < 10000; i++) {
-+ err = pci_read_config_byte(pdev, 0xF5, &fw_status);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+ if (!(fw_status & (BIT(0) | BIT(1))))
-+ break;
-+
-+ udelay(1);
-+ }
-+ if (i == 10000)
-+ dev_warn(&pdev->dev, "Final Firmware Download step timed out.");
-+
-+ /*
-+ * 11. After finishing writing the last data of FW, the
-+ * System Software must clear "FW Download Enable"
-+ */
-+ err = pci_write_config_byte(pdev, 0xF4, 0);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ /* 12. Read "Result Code" and confirm it is good. */
-+ for (i = 0; i < 10000; i++) {
-+ err = pci_read_config_byte(pdev, 0xF4, &fw_status);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+ if (fw_status & BIT(4))
-+ break;
-+
-+ udelay(1);
-+ }
-+ if (i == 10000) {
-+ /* Timed out / Error - let's see if we can fix this */
-+ err = renesas_fw_check_running(pdev);
-+ switch (err) {
-+ case 0: /*
-+ * we shouldn't end up here.
-+ * maybe it took a little bit longer.
-+ * But all should be well?
-+ */
-+ break;
-+
-+ case 1: /* (No result yet? - we can try to retry) */
-+ if (retry_counter < 10) {
-+ retry_counter++;
-+ dev_warn(&pdev->dev, "Retry Firmware download: %d try.",
-+ retry_counter);
-+ return renesas_fw_download(pdev, fw,
-+ retry_counter);
-+ }
-+ return -ETIMEDOUT;
-+
-+ default:
-+ return err;
-+ }
-+ }
-+ /*
-+ * Optional last step: Engage Firmware Lock
-+ *
-+ * err = pci_write_config_byte(pdev, 0xF4, BIT(2));
-+ * if (err)
-+ * return pcibios_err_to_errno(err);
-+ */
-+
-+ return 0;
-+}
-+
-+struct renesas_fw_ctx {
-+ struct pci_dev *pdev;
-+ const struct pci_device_id *id;
-+ bool resume;
-+};
-+
-+static int xhci_pci_probe(struct pci_dev *pdev,
-+ const struct pci_device_id *id);
-+
-+static void renesas_fw_callback(const struct firmware *fw,
-+ void *context)
-+{
-+ struct renesas_fw_ctx *ctx = context;
-+ struct pci_dev *pdev = ctx->pdev;
-+ struct device *parent = pdev->dev.parent;
-+ int err = -ENOENT;
-+
-+ if (fw) {
-+ err = renesas_fw_verify(pdev, fw->data, fw->size);
-+ if (!err) {
-+ err = renesas_fw_download(pdev, fw, 0);
-+ release_firmware(fw);
-+ if (!err) {
-+ if (ctx->resume)
-+ return;
-+
-+ err = xhci_pci_probe(pdev, ctx->id);
-+ if (!err) {
-+ /* everything worked */
-+ devm_kfree(&pdev->dev, ctx);
-+ return;
-+ }
-+
-+ /* in case of an error - fall through */
-+ } else {
-+ dev_err(&pdev->dev, "firmware failed to download (%d).",
-+ err);
-+ }
-+ }
-+ } else {
-+ dev_err(&pdev->dev, "firmware failed to load (%d).", err);
-+ }
-+
-+ dev_info(&pdev->dev, "Unloading driver");
-+
-+ if (parent)
-+ device_lock(parent);
-+
-+ device_release_driver(&pdev->dev);
-+
-+ if (parent)
-+ device_unlock(parent);
-+
-+ pci_dev_put(pdev);
-+}
-+
-+static int renesas_fw_alive_check(struct pci_dev *pdev)
-+{
-+ const struct renesas_fw_entry *entry;
-+ int err;
-+
-+ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
-+ entry = renesas_needs_fw_dl(pdev);
-+ if (!entry)
-+ return 0;
-+
-+ err = renesas_fw_check_running(pdev);
-+ /* Also go ahead, if the firmware is running */
-+ if (err == 0)
-+ return 0;
-+
-+ /* At this point, we can be sure that the FW isn't ready. */
-+ return err;
-+}
-+
-+static int renesas_fw_download_to_hw(struct pci_dev *pdev,
-+ const struct pci_device_id *id,
-+ bool do_resume)
-+{
-+ const struct renesas_fw_entry *entry;
-+ struct renesas_fw_ctx *ctx;
-+ int err;
-+
-+ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
-+ entry = renesas_needs_fw_dl(pdev);
-+ if (!entry)
-+ return 0;
-+
-+ err = renesas_fw_check_running(pdev);
-+ /* Continue ahead, if the firmware is already running. */
-+ if (err == 0)
-+ return 0;
-+
-+ if (err != 1)
-+ return err;
-+
-+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
-+ if (!ctx)
-+ return -ENOMEM;
-+ ctx->pdev = pdev;
-+ ctx->resume = do_resume;
-+ ctx->id = id;
-+
-+ pci_dev_get(pdev);
-+ err = request_firmware_nowait(THIS_MODULE, 1, entry->firmware_name,
-+ &pdev->dev, GFP_KERNEL, ctx, renesas_fw_callback);
-+ if (err) {
-+ pci_dev_put(pdev);
-+ return err;
-+ }
-+
-+ /*
-+ * The renesas_fw_callback() callback will continue the probe
-+ * process, once it aquires the firmware.
-+ */
-+ return 1;
-+}
-+
- /* called during probe() after chip reset completes */
- static int xhci_pci_setup(struct usb_hcd *hcd)
- {
-@@ -309,6 +763,22 @@ static int xhci_pci_probe(struct pci_dev
- struct hc_driver *driver;
- struct usb_hcd *hcd;
-
-+ /*
-+ * Check if this device is a RENESAS uPD720201/2 device.
-+ * Otherwise, we can continue with xhci_pci_probe as usual.
-+ */
-+ retval = renesas_fw_download_to_hw(dev, id, false);
-+ switch (retval) {
-+ case 0:
-+ break;
-+
-+ case 1: /* let it load the firmware and recontinue the probe. */
-+ return 0;
-+
-+ default:
-+ return retval;
-+ }
-+
- driver = (struct hc_driver *)id->driver_data;
-
- /* Prevent runtime suspending between USB-2 and USB-3 initialization */
-@@ -367,6 +837,16 @@ static void xhci_pci_remove(struct pci_d
- {
- struct xhci_hcd *xhci;
-
-+ if (renesas_fw_alive_check(dev)) {
-+ /*
-+ * bail out early, if this was a renesas device w/o FW.
-+ * Else we might hit the NMI watchdog in xhci_handsake
-+ * during xhci_reset as part of the driver's unloading.
-+ * which we forced in the renesas_fw_callback().
-+ */
-+ return;
-+ }
-+
- xhci = hcd_to_xhci(pci_get_drvdata(dev));
- xhci->xhc_state |= XHCI_STATE_REMOVING;
- if (xhci->shared_hcd) {
diff --git a/target/linux/apm821xx/patches-4.19/802-usb-xhci-force-msi-renesas-xhci.patch b/target/linux/apm821xx/patches-4.19/802-usb-xhci-force-msi-renesas-xhci.patch
deleted file mode 100644
index 8ada844214..0000000000
--- a/target/linux/apm821xx/patches-4.19/802-usb-xhci-force-msi-renesas-xhci.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From a0dc613140bab907a3d5787a7ae7b0638bf674d0 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Thu, 23 Jun 2016 20:28:20 +0200
-Subject: [PATCH] usb: xhci: force MSI for uPD720201 and
- uPD720202
-
-The APM82181 does not support MSI-X. When probed, it will
-produce a noisy warning.
-
----
- drivers/usb/host/pci-quirks.c | 362 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 362 insertions(+)
-
---- a/drivers/usb/host/xhci-pci.c
-+++ b/drivers/usb/host/xhci-pci.c
-@@ -218,6 +218,7 @@ static void xhci_pci_quirks(struct devic
- pdev->device == 0x0015) {
- xhci->quirks |= XHCI_RESET_ON_RESUME;
- xhci->quirks |= XHCI_ZERO_64B_REGS;
-+ xhci->quirks |= XHCI_FORCE_MSI;
- }
- if (pdev->vendor == PCI_VENDOR_ID_VIA)
- xhci->quirks |= XHCI_RESET_ON_RESUME;
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -422,10 +422,14 @@ static int xhci_try_enable_msi(struct us
- free_irq(hcd->irq, hcd);
- hcd->irq = 0;
-
-- ret = xhci_setup_msix(xhci);
-- if (ret)
-- /* fall back to msi*/
-+ if (xhci->quirks & XHCI_FORCE_MSI) {
- ret = xhci_setup_msi(xhci);
-+ } else {
-+ ret = xhci_setup_msix(xhci);
-+ if (ret)
-+ /* fall back to msi*/
-+ ret = xhci_setup_msi(xhci);
-+ }
-
- if (!ret) {
- hcd->msi_enabled = 1;
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -1883,6 +1883,7 @@ struct xhci_hcd {
- /* support xHCI 0.96 spec USB2 software LPM */
- unsigned sw_lpm_support:1;
- /* support xHCI 1.0 spec USB2 hardware LPM */
-+#define XHCI_FORCE_MSI (1 << 24)
- unsigned hw_lpm_support:1;
- /* Broken Suspend flag for SNPS Suspend resume issue */
- unsigned broken_suspend:1;
diff --git a/target/linux/apm821xx/patches-4.19/803-hwmon-tc654-add-detection-routine.patch b/target/linux/apm821xx/patches-4.19/803-hwmon-tc654-add-detection-routine.patch
deleted file mode 100644
index f8b30ae1b3..0000000000
--- a/target/linux/apm821xx/patches-4.19/803-hwmon-tc654-add-detection-routine.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 694f9bfb8efaef8a33e8992015ff9d0866faf4a2 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 17 Dec 2017 17:27:15 +0100
-Subject: [PATCH 1/2] hwmon: tc654 add detection routine
-
-This patch adds a detection routine for the TC654/TC655
-chips. Both IDs are listed in the Datasheet.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- drivers/hwmon/tc654.c | 29 +++++++++++++++++++++++++++++
- 1 file changed, 29 insertions(+)
-
---- a/drivers/hwmon/tc654.c
-+++ b/drivers/hwmon/tc654.c
-@@ -64,6 +64,11 @@ enum tc654_regs {
- /* Register data is read (and cached) at most once per second. */
- #define TC654_UPDATE_INTERVAL HZ
-
-+/* Manufacturer and Version Identification Register Values */
-+#define TC654_MFR_ID_MICROCHIP 0x84
-+#define TC654_VER_ID 0x00
-+#define TC655_VER_ID 0x01
-+
- struct tc654_data {
- struct i2c_client *client;
-
-@@ -497,6 +502,29 @@ static const struct i2c_device_id tc654_
- {}
- };
-
-+static int
-+tc654_detect(struct i2c_client *new_client, struct i2c_board_info *info)
-+{
-+ struct i2c_adapter *adapter = new_client->adapter;
-+ int manufacturer, product;
-+
-+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-+ return -ENODEV;
-+
-+ manufacturer = i2c_smbus_read_byte_data(new_client, TC654_REG_MFR_ID);
-+ if (manufacturer != TC654_MFR_ID_MICROCHIP)
-+ return -ENODEV;
-+
-+ product = i2c_smbus_read_byte_data(new_client, TC654_REG_VER_ID);
-+ if (!((product == TC654_VER_ID) || (product == TC655_VER_ID)))
-+ return -ENODEV;
-+
-+ strlcpy(info->type, product == TC654_VER_ID ? "tc654" : "tc655",
-+ I2C_NAME_SIZE);
-+ return 0;
-+}
-+
-+
- MODULE_DEVICE_TABLE(i2c, tc654_id);
-
- static struct i2c_driver tc654_driver = {
-@@ -505,6 +533,7 @@ static struct i2c_driver tc654_driver =
- },
- .probe = tc654_probe,
- .id_table = tc654_id,
-+ .detect = tc654_detect,
- };
-
- module_i2c_driver(tc654_driver);
diff --git a/target/linux/apm821xx/patches-4.19/804-hwmon-tc654-add-thermal_cooling-device.patch b/target/linux/apm821xx/patches-4.19/804-hwmon-tc654-add-thermal_cooling-device.patch
deleted file mode 100644
index 18ed8aecce..0000000000
--- a/target/linux/apm821xx/patches-4.19/804-hwmon-tc654-add-thermal_cooling-device.patch
+++ /dev/null
@@ -1,174 +0,0 @@
-From 15ae701189744d321d3a1264ff46f8871e8765ee Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 17 Dec 2017 17:29:13 +0100
-Subject: [PATCH] hwmon: tc654: add thermal_cooling device
-
-This patch adds a thermaL_cooling device to the tc654 driver.
-This allows the chip to be used for DT-based cooling.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- drivers/hwmon/tc654.c | 103 +++++++++++++++++++++++++++++++++++++++++---------
- 1 file changed, 86 insertions(+), 17 deletions(-)
-
---- a/drivers/hwmon/tc654.c
-+++ b/drivers/hwmon/tc654.c
-@@ -24,6 +24,7 @@
- #include <linux/module.h>
- #include <linux/mutex.h>
- #include <linux/slab.h>
-+#include <linux/thermal.h>
- #include <linux/util_macros.h>
-
- enum tc654_regs {
-@@ -141,6 +142,9 @@ struct tc654_data {
- * writable register used to control the duty
- * cycle of the V OUT output.
- */
-+
-+ /* optional cooling device */
-+ struct thermal_cooling_device *cdev;
- };
-
- /* helper to grab and cache data, at most one time per second */
-@@ -376,36 +380,30 @@ static ssize_t set_pwm_mode(struct devic
- static const int tc654_pwm_map[16] = { 77, 88, 102, 112, 124, 136, 148, 160,
- 172, 184, 196, 207, 219, 231, 243, 255};
-
-+static int get_pwm(struct tc654_data *data)
-+{
-+ if (data->config & TC654_REG_CONFIG_SDM)
-+ return 0;
-+ else
-+ return tc654_pwm_map[data->duty_cycle];
-+}
-+
- static ssize_t show_pwm(struct device *dev, struct device_attribute *da,
- char *buf)
- {
- struct tc654_data *data = tc654_update_client(dev);
-- int pwm;
-
- if (IS_ERR(data))
- return PTR_ERR(data);
-
-- if (data->config & TC654_REG_CONFIG_SDM)
-- pwm = 0;
-- else
-- pwm = tc654_pwm_map[data->duty_cycle];
--
-- return sprintf(buf, "%d\n", pwm);
-+ return sprintf(buf, "%d\n", get_pwm(data));
- }
-
--static ssize_t set_pwm(struct device *dev, struct device_attribute *da,
-- const char *buf, size_t count)
-+static int _set_pwm(struct tc654_data *data, unsigned long val)
- {
-- struct tc654_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
-- unsigned long val;
- int ret;
-
-- if (kstrtoul(buf, 10, &val))
-- return -EINVAL;
-- if (val > 255)
-- return -EINVAL;
--
- mutex_lock(&data->update_lock);
-
- if (val == 0)
-@@ -425,6 +423,22 @@ static ssize_t set_pwm(struct device *de
-
- out:
- mutex_unlock(&data->update_lock);
-+ return ret;
-+}
-+
-+static ssize_t set_pwm(struct device *dev, struct device_attribute *da,
-+ const char *buf, size_t count)
-+{
-+ struct tc654_data *data = dev_get_drvdata(dev);
-+ unsigned long val;
-+ int ret;
-+
-+ if (kstrtoul(buf, 10, &val))
-+ return -EINVAL;
-+ if (val > 255)
-+ return -EINVAL;
-+
-+ ret = _set_pwm(data, val);
- return ret < 0 ? ret : count;
- }
-
-@@ -462,6 +476,47 @@ static struct attribute *tc654_attrs[] =
-
- ATTRIBUTE_GROUPS(tc654);
-
-+/* cooling device */
-+
-+static int tc654_get_max_state(struct thermal_cooling_device *cdev,
-+ unsigned long *state)
-+{
-+ *state = 255;
-+ return 0;
-+}
-+
-+static int tc654_get_cur_state(struct thermal_cooling_device *cdev,
-+ unsigned long *state)
-+{
-+ struct tc654_data *data = tc654_update_client(cdev->devdata);
-+
-+ if (IS_ERR(data))
-+ return PTR_ERR(data);
-+
-+ *state = get_pwm(data);
-+ return 0;
-+}
-+
-+static int tc654_set_cur_state(struct thermal_cooling_device *cdev,
-+ unsigned long state)
-+{
-+ struct tc654_data *data = tc654_update_client(cdev->devdata);
-+
-+ if (IS_ERR(data))
-+ return PTR_ERR(data);
-+
-+ if (state > 255)
-+ return -EINVAL;
-+
-+ return _set_pwm(data, state);
-+}
-+
-+static const struct thermal_cooling_device_ops tc654_fan_cool_ops = {
-+ .get_max_state = tc654_get_max_state,
-+ .get_cur_state = tc654_get_cur_state,
-+ .set_cur_state = tc654_set_cur_state,
-+};
-+
- /*
- * device probe and removal
- */
-@@ -493,7 +548,21 @@ static int tc654_probe(struct i2c_client
- hwmon_dev =
- devm_hwmon_device_register_with_groups(dev, client->name, data,
- tc654_groups);
-- return PTR_ERR_OR_ZERO(hwmon_dev);
-+ if (IS_ERR(hwmon_dev))
-+ return PTR_ERR(hwmon_dev);
-+
-+#if IS_ENABLED(CONFIG_OF)
-+ /* Optional cooling device register for Device tree platforms */
-+ data->cdev = thermal_of_cooling_device_register(client->dev.of_node,
-+ "tc654", hwmon_dev,
-+ &tc654_fan_cool_ops);
-+#else /* CONFIG_OF */
-+ /* Optional cooling device register for non Device tree platforms */
-+ data->cdev = thermal_cooling_device_register("tc654", hwmon_dev,
-+ &tc654_fan_cool_ops);
-+#endif /* CONFIG_OF */
-+
-+ return PTR_ERR_OR_ZERO(data->cdev);
- }
-
- static const struct i2c_device_id tc654_id[] = {