aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/apm821xx
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/apm821xx')
-rw-r--r--target/linux/apm821xx/dts/wd-mybooklive.dts59
-rw-r--r--target/linux/apm821xx/sata/config-default2
2 files changed, 31 insertions, 30 deletions
diff --git a/target/linux/apm821xx/dts/wd-mybooklive.dts b/target/linux/apm821xx/dts/wd-mybooklive.dts
index aee0d3266d..4c61987119 100644
--- a/target/linux/apm821xx/dts/wd-mybooklive.dts
+++ b/target/linux/apm821xx/dts/wd-mybooklive.dts
@@ -59,14 +59,6 @@
#gpio-cells = <2>;
gpio-controller;
- enable-phy {
- /* toggle to reset EMAC PHY */
- gpio-hog;
- line-name = "enable EMAC PHY";
- gpios = <0 GPIO_ACTIVE_LOW>;
- output-low;
- };
-
enable-button {
/* Defined in u-boot as: NOT_NOR
* "enables features other than NOR
@@ -83,27 +75,6 @@
gpios = <1 GPIO_ACTIVE_HIGH>;
output-low;
};
-
- enable-usb {
- gpio-hog;
- line-name = "Power USB Core";
- gpios = <2 GPIO_ACTIVE_LOW>;
- output-low;
- };
-
- enable-port1 {
- gpio-hog;
- line-name = "Power Drive Port 1";
- gpios = <3 GPIO_ACTIVE_LOW>;
- output-low;
- };
-
- enable-port0 {
- gpio-hog;
- line-name = "Power Drive Port 0";
- gpios = <7 GPIO_ACTIVE_LOW>;
- output-low;
- };
};
GPIO2: gpio2@e0100000 {
@@ -135,7 +106,7 @@
};
};
- gpio_keys_polled {
+ gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
@@ -148,6 +119,32 @@
gpios = <&GPIO2 2 GPIO_ACTIVE_LOW>;
};
};
+
+ usbpwr: usb-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "Power USB Core";
+ gpios = <&GPIO1 2 GPIO_ACTIVE_LOW>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ sata1pwr: sata1-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "Power Drive Port 1";
+ gpios = <&GPIO1 3 GPIO_ACTIVE_LOW>;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on; /* needed to read OS from HDD */
+ };
+
+ sata0pwr: sata0-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "Power Drive Port 0";
+ gpios = <&GPIO1 7 GPIO_ACTIVE_LOW>;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on; /* needed to read OS from HDD */
+ };
};
&EMAC0 {
@@ -160,6 +157,7 @@
mdio {
#address-cells = <1>;
#size-cells = <0>;
+ reset-gpios = <&GPIO1 0 GPIO_ACTIVE_LOW>;
phy: phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
@@ -195,4 +193,5 @@
&USBOTG0 {
status = "okay";
dr_mode = "host";
+ vbus-supply = <&usbpwr>;
};
diff --git a/target/linux/apm821xx/sata/config-default b/target/linux/apm821xx/sata/config-default
index 4c7c655233..5af8c338f5 100644
--- a/target/linux/apm821xx/sata/config-default
+++ b/target/linux/apm821xx/sata/config-default
@@ -45,3 +45,5 @@ CONFIG_PPC_EARLY_DEBUG_44x=y
# CONFIG_PPC_EARLY_DEBUG_MEMCONS is not set
CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x4
CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y