aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/apm821xx/patches-5.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/apm821xx/patches-5.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch')
-rw-r--r--target/linux/apm821xx/patches-5.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch1026
1 files changed, 1026 insertions, 0 deletions
diff --git a/target/linux/apm821xx/patches-5.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch b/target/linux/apm821xx/patches-5.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
new file mode 100644
index 0000000000..0bc4b2c65b
--- /dev/null
+++ b/target/linux/apm821xx/patches-5.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
@@ -0,0 +1,1026 @@
+Subject: [PATCH v2 1/5] usb: xhci: add firmware loader for uPD720201 and uPD720202 w/o ROM
+Date: Fri, 21 Jun 2019 14:29:09 +0530
+Message-Id: <20190621085913.8722-2-vkoul@kernel.org>
+From: Christian Lamparter <chunkeey@googlemail.com>
+
+This patch adds a firmware loader for the uPD720201K8-711-BAC-A
+and uPD720202K8-711-BAA-A variant. Both of these chips are listed
+in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as
+devices which need the firmware loader on page 2 in order to
+work as they "do not support the External ROM".
+
+The "Firmware Download Sequence" is describe in chapter
+"7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
+
+The firmware "K2013080.mem" is available from a USB3.0 Host to
+PCIe Adapter (PP2U-E card) "Firmware download" archive. An
+alternative version can be sourced from Netgear's WNDR4700 GPL
+archives.
+
+The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3
+(2012-06-15) state that the firmware is for the following devices:
+ - uPD720201 ES 2.0 sample whose revision ID is 2.
+ - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
+ - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
+
+Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+[vkoul: fixed comments:
+ used macros for timeout count and delay
+ removed renesas_fw_alive_check
+ cleaned renesas_fw_callback
+ removed recurion for renesas_fw_download
+ added MODULE_FIRMWARE]
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+---
+ drivers/usb/host/xhci-pci.c | 458 ++++++++++++++++++++++++++++++++++++
+ 1 file changed, 458 insertions(+)
+
+--- a/drivers/usb/host/xhci-pci.c
++++ b/drivers/usb/host/xhci-pci.c
+@@ -12,6 +12,8 @@
+ #include <linux/slab.h>
+ #include <linux/module.h>
+ #include <linux/acpi.h>
++#include <linux/firmware.h>
++#include <linux/unaligned/access_ok.h>
+
+ #include "xhci.h"
+ #include "xhci-trace.h"
+@@ -48,6 +50,44 @@
+ #define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc
+ #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142
+
++#define RENESAS_FW_VERSION 0x6C
++#define RENESAS_ROM_CONFIG 0xF0
++#define RENESAS_FW_STATUS 0xF4
++#define RENESAS_FW_STATUS_MSB 0xF5
++#define RENESAS_ROM_STATUS 0xF6
++#define RENESAS_ROM_STATUS_MSB 0xF7
++#define RENESAS_DATA0 0xF8
++#define RENESAS_DATA1 0xFC
++
++#define RENESAS_FW_VERSION_FIELD GENMASK(23, 7)
++#define RENESAS_FW_VERSION_OFFSET 8
++
++#define RENESAS_FW_STATUS_DOWNLOAD_ENABLE BIT(0)
++#define RENESAS_FW_STATUS_LOCK BIT(1)
++#define RENESAS_FW_STATUS_RESULT GENMASK(6, 4)
++ #define RENESAS_FW_STATUS_INVALID 0
++ #define RENESAS_FW_STATUS_SUCCESS BIT(4)
++ #define RENESAS_FW_STATUS_ERROR BIT(5)
++#define RENESAS_FW_STATUS_SET_DATA0 BIT(8)
++#define RENESAS_FW_STATUS_SET_DATA1 BIT(9)
++
++#define RENESAS_ROM_STATUS_ACCESS BIT(0)
++#define RENESAS_ROM_STATUS_ERASE BIT(1)
++#define RENESAS_ROM_STATUS_RELOAD BIT(2)
++#define RENESAS_ROM_STATUS_RESULT GENMASK(6, 4)
++ #define RENESAS_ROM_STATUS_INVALID 0
++ #define RENESAS_ROM_STATUS_SUCCESS BIT(4)
++ #define RENESAS_ROM_STATUS_ERROR BIT(5)
++#define RENESAS_ROM_STATUS_SET_DATA0 BIT(8)
++#define RENESAS_ROM_STATUS_SET_DATA1 BIT(9)
++#define RENESAS_ROM_STATUS_ROM_EXISTS BIT(15)
++
++#define RENESAS_ROM_ERASE_MAGIC 0x5A65726F
++#define RENESAS_ROM_WRITE_MAGIC 0x53524F4D
++
++#define RENESAS_RETRY 1000
++#define RENESAS_DELAY 10
++
+ static const char hcd_name[] = "xhci_hcd";
+
+ static struct hc_driver __read_mostly xhci_pci_hc_driver;
+@@ -262,6 +302,873 @@ static void xhci_pme_acpi_rtd3_enable(st
+ static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
+ #endif /* CONFIG_ACPI */
+
++static const struct renesas_fw_entry {
++ const char *firmware_name;
++ u16 device;
++ u8 revision;
++ u16 expected_version;
++} renesas_fw_table[] = {
++ /*
++ * Only the uPD720201K8-711-BAC-A or uPD720202K8-711-BAA-A
++ * are listed in R19UH0078EJ0500 Rev.5.00 as devices which
++ * need the software loader.
++ *
++ * PP2U/ReleaseNote_USB3-201-202-FW.txt:
++ *
++ * Note: This firmware is for the following devices.
++ * - uPD720201 ES 2.0 sample whose revision ID is 2.
++ * - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
++ * - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
++ *
++ * Entry expected_version should be kept in increasing order for a
++ * chip, so that driver will pick first version and if that fails
++ * then next one will be picked
++ */
++ { "K2013080.mem", 0x0014, 0x02, 0x2013 },
++ { "K2013080.mem", 0x0014, 0x03, 0x2013 },
++ { "K2026090.mem", 0x0014, 0x03, 0x2026 },
++ { "K2013080.mem", 0x0015, 0x02, 0x2013 },
++ { "K2026090.mem", 0x0015, 0x02, 0x2026 },
++};
++
++MODULE_FIRMWARE("K2013080.mem");
++MODULE_FIRMWARE("K2026090.mem");
++
++static const struct renesas_fw_entry *renesas_needs_fw_dl(struct pci_dev *dev)
++{
++ const struct renesas_fw_entry *entry;
++ size_t i;
++
++ /* This loader will only work with a RENESAS device. */
++ if (!(dev->vendor == PCI_VENDOR_ID_RENESAS))
++ return NULL;
++
++ for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) {
++ entry = &renesas_fw_table[i];
++ if (entry->device == dev->device &&
++ entry->revision == dev->revision)
++ return entry;
++ }
++
++ return NULL;
++}
++
++static const struct
++renesas_fw_entry *renesas_get_next_entry(struct pci_dev *dev,
++ const struct renesas_fw_entry *entry)
++{
++ const struct renesas_fw_entry *next_entry;
++ size_t i;
++
++ for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) {
++ next_entry = &renesas_fw_table[i];
++ if (next_entry->device == dev->device &&
++ next_entry->revision == dev->revision &&
++ next_entry->expected_version > entry->expected_version)
++ return next_entry;
++ }
++
++ return NULL;
++}
++
++static int renesas_fw_download_image(struct pci_dev *dev,
++ const u32 *fw,
++ size_t step)
++{
++ size_t i;
++ int err;
++ u8 fw_status;
++ bool data0_or_data1;
++
++ /*
++ * The hardware does alternate between two 32-bit pages.
++ * (This is because each row of the firmware is 8 bytes).
++ *
++ * for even steps we use DATA0, for odd steps DATA1.
++ */
++ data0_or_data1 = (step & 1) == 1;
++
++ /* step+1. Read "Set DATAX" and confirm it is cleared. */
++ for (i = 0; i < RENESAS_RETRY; i++) {
++ err = pci_read_config_byte(dev, RENESAS_FW_STATUS_MSB,
++ &fw_status);
++ if (err)
++ return pcibios_err_to_errno(err);
++ if (!(fw_status & BIT(data0_or_data1)))
++ break;
++
++ udelay(RENESAS_DELAY);
++ }
++ if (i == RENESAS_RETRY)
++ return -ETIMEDOUT;
++
++ /*
++ * step+2. Write FW data to "DATAX".
++ * "LSB is left" => force little endian
++ */
++ err = pci_write_config_dword(dev, data0_or_data1 ?
++ RENESAS_DATA1 : RENESAS_DATA0,
++ (__force u32)cpu_to_le32(fw[step]));
++ if (err)
++ return pcibios_err_to_errno(err);
++
++ udelay(100);
++
++ /* step+3. Set "Set DATAX". */
++ err = pci_write_config_byte(dev, RENESAS_FW_STATUS_MSB,
++ BIT(data0_or_data1));
++ if (err)
++ return pcibios_err_to_errno(err);
++
++ return 0;
++}
++
++static int renesas_fw_verify(struct pci_dev *dev,
++ const void *fw_data,
++ size_t length)
++{
++ const struct renesas_fw_entry *entry = renesas_needs_fw_dl(dev);
++ u16 fw_version_pointer;
++ u16 fw_version;
++
++ if (!entry)
++ return -EINVAL;
++
++ /*
++ * The Firmware's Data Format is describe in
++ * "6.3 Data Format" R19UH0078EJ0500 Rev.5.00 page 124
++ */
++
++ /* "Each row is 8 bytes". => firmware size must be a multiple of 8. */
++ if (length % 8 != 0)
++ dev_warn(&dev->dev, "firmware size is not a multiple of 8.");
++
++ /*
++ * The bootrom chips of the big brother have sizes up to 64k, let's
++ * assume that's the biggest the firmware can get.
++ */
++ if (length < 0x1000 || length >= 0x10000) {
++ dev_err(&dev->dev, "firmware is size %zd is not (4k - 64k).",
++ length);
++ return -EINVAL;
++ }
++
++ /* The First 2 bytes are fixed value (55aa). "LSB on Left" */
++ if (get_unaligned_le16(fw_data) != 0x55aa) {
++ dev_err(&dev->dev, "no valid firmware header found.");
++ return -EINVAL;
++ }
++
++ /* verify the firmware version position and print it. */
++ fw_version_pointer = get_unaligned_le16(fw_data + 4);
++ if (fw_version_pointer + 2 >= length) {
++ dev_err(&dev->dev,
++ "firmware version pointer is outside of the firmware image.");
++ return -EINVAL;
++ }
++
++ fw_version = get_unaligned_le16(fw_data + fw_version_pointer);
++ dev_dbg(&dev->dev, "got firmware version: %02x.", fw_version);
++
++ if (fw_version != entry->expected_version) {
++ dev_err(&dev->dev,
++ "firmware version mismatch, expected version: %02x.",
++ entry->expected_version);
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static int renesas_check_rom_state(struct pci_dev *pdev)
++{
++ const struct renesas_fw_entry *entry;
++ u16 rom_state;
++ u32 version;
++ bool valid_version = false;
++ int err, i;
++
++ /* check FW version */
++ err = pci_read_config_dword(pdev, RENESAS_FW_VERSION, &version);
++ if (err)
++ return pcibios_err_to_errno(err);
++
++ version &= RENESAS_FW_VERSION_FIELD;
++ version = version >> RENESAS_FW_VERSION_OFFSET;
++ dev_dbg(&pdev->dev, "Found FW version loaded is %x\n", version);
++
++ /* treat version in renesas_fw_table as correct ones */
++ for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) {
++ entry = &renesas_fw_table[i];
++ if (version == entry->expected_version) {
++ dev_dbg(&pdev->dev, "Detected valid ROM version..\n");
++ valid_version = true;
++ }
++ }
++
++ /*
++ * Test if ROM is present and loaded, if so we can skip everything
++ */
++ err = pci_read_config_word(pdev, RENESAS_ROM_STATUS, &rom_state);
++ if (err)
++ return pcibios_err_to_errno(err);
++
++ if (rom_state & BIT(15)) {
++ /* ROM exists */
++ dev_dbg(&pdev->dev, "ROM exists\n");
++
++ /* Check the "Result Code" Bits (6:4) and act accordingly */
++ switch (rom_state & RENESAS_ROM_STATUS_RESULT) {
++ case RENESAS_ROM_STATUS_SUCCESS:
++ dev_dbg(&pdev->dev, "Success ROM load...");
++ /* we have valid version and status so success */
++ if (valid_version)
++ return 0;
++ break;
++
++ case RENESAS_ROM_STATUS_INVALID: /* No result yet */
++ dev_dbg(&pdev->dev, "No result as it is ROM...");
++ /* we have valid version and status so success */
++ if (valid_version)
++ return 0;
++ break;
++
++ case RENESAS_ROM_STATUS_ERROR: /* Error State */
++ default: /* All other states are marked as "Reserved states" */
++ dev_err(&pdev->dev, "Invalid ROM..");
++ break;
++ }
++ }
++
++ return -EIO;
++}
++
++static int renesas_fw_check_running(struct pci_dev *pdev)
++{
++ int err;
++ u8 fw_state;
++
++ /* Check if device has ROM and loaded, if so skip everything */
++ err = renesas_check_rom_state(pdev);
++ if (!err)
++ return err;
++
++ /*
++ * Test if the device is actually needing the firmware. As most
++ * BIOSes will initialize the device for us. If the device is
++ * initialized.
++ */
++ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_state);
++ if (err)
++ return pcibios_err_to_errno(err);
++
++ /*
++ * Check if "FW Download Lock" is locked. If it is and the FW is
++ * ready we can simply continue. If the FW is not ready, we have
++ * to give up.
++ */
++ if (fw_state & RENESAS_FW_STATUS_LOCK) {
++ dev_dbg(&pdev->dev, "FW Download Lock is engaged.");
++
++ if (fw_state & RENESAS_FW_STATUS_SUCCESS)
++ return 0;
++
++ dev_err(&pdev->dev,
++ "FW Download Lock is set and FW is not ready. Giving Up.");
++ return -EIO;
++ }
++
++ /*
++ * Check if "FW Download Enable" is set. If someone (us?) tampered
++ * with it and it can't be resetted, we have to give up too... and
++ * ask for a forgiveness and a reboot.
++ */
++ if (fw_state & RENESAS_FW_STATUS_DOWNLOAD_ENABLE) {
++ dev_err(&pdev->dev,
++ "FW Download Enable is stale. Giving Up (poweroff/reboot needed).");
++ return -EIO;
++ }
++
++ /* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */
++ switch (fw_state & RENESAS_FW_STATUS_RESULT) {
++ case 0: /* No result yet */
++ dev_dbg(&pdev->dev, "FW is not ready/loaded yet.");
++
++ /* tell the caller, that this device needs the firmware. */
++ return 1;
++
++ case RENESAS_FW_STATUS_SUCCESS: /* Success, device should be working. */
++ dev_dbg(&pdev->dev, "FW is ready.");
++ return 0;
++
++ case RENESAS_FW_STATUS_ERROR: /* Error State */
++ dev_err(&pdev->dev,
++ "hardware is in an error state. Giving up (poweroff/reboot needed).");
++ return -ENODEV;
++
++ default: /* All other states are marked as "Reserved states" */
++ dev_err(&pdev->dev,
++ "hardware is in an invalid state %lx. Giving up (poweroff/reboot needed).",
++ (fw_state & RENESAS_FW_STATUS_RESULT) >> 4);
++ return -EINVAL;
++ }
++}
++
++static int renesas_fw_download(struct pci_dev *pdev,
++ const struct firmware *fw)
++{
++ const u32 *fw_data = (const u32 *)fw->data;
++ size_t i;
++ int err;
++ u8 fw_status;
++
++ /*
++ * For more information and the big picture: please look at the
++ * "Firmware Download Sequence" in "7.1 FW Download Interface"
++ * of R19UH0078EJ0500 Rev.5.00 page 131
++ */
++
++ /*
++ * 0. Set "FW Download Enable" bit in the
++ * "FW Download Control & Status Register" at 0xF4
++ */
++ err = pci_write_config_byte(pdev, RENESAS_FW_STATUS,
++ RENESAS_FW_STATUS_DOWNLOAD_ENABLE);
++ if (err)
++ return pcibios_err_to_errno(err);
++
++ /* 1 - 10 follow one step after the other. */
++ for (i = 0; i < fw->size / 4; i++) {
++ err = renesas_fw_download_image(pdev, fw_data, i);
++ if (err) {
++ dev_err(&pdev->dev,
++ "Firmware Download Step %zd failed at position %zd bytes with (%d).",
++ i, i * 4, err);
++ return err;
++ }
++ }
++
++ /*
++ * This sequence continues until the last data is written to
++ * "DATA0" or "DATA1". Naturally, we wait until "SET DATA0/1"
++ * is cleared by the hardware beforehand.
++ */
++ for (i = 0; i < RENESAS_RETRY; i++) {
++ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS_MSB,
++ &fw_status);
++ if (err)
++ return pcibios_err_to_errno(err);
++ if (!(fw_status & (BIT(0) | BIT(1))))
++ break;
++
++ udelay(RENESAS_DELAY);
++ }
++ if (i == RENESAS_RETRY)
++ dev_warn(&pdev->dev, "Final Firmware Download step timed out.");
++
++ /*
++ * 11. After finishing writing the last data of FW, the
++ * System Software must clear "FW Download Enable"
++ */
++ err = pci_write_config_byte(pdev, RENESAS_FW_STATUS, 0);
++ if (err)
++ return pcibios_err_to_errno(err);
++
++ /* 12. Read "Result Code" and confirm it is good. */
++ for (i = 0; i < RENESAS_RETRY; i++) {
++ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_status);
++ if (err)
++ return pcibios_err_to_errno(err);
++ if (fw_status & RENESAS_FW_STATUS_SUCCESS)
++ break;
++
++ udelay(RENESAS_DELAY);
++ }
++ if (i == RENESAS_RETRY) {
++ /* Timed out / Error - let's see if we can fix this */
++ err = renesas_fw_check_running(pdev);
++ switch (err) {
++ case 0: /*
++ * we shouldn't end up here.
++ * maybe it took a little bit longer.
++ * But all should be well?
++ */
++ break;
++
++ case 1: /* (No result yet! */
++ return -ETIMEDOUT;
++
++ default:
++ return err;
++ }
++ }
++ /*
++ * Optional last step: Engage Firmware Lock
++ *
++ * err = pci_write_config_byte(pdev, 0xF4, BIT(2));
++ * if (err)
++ * return pcibios_err_to_errno(err);
++ */
++
++ return 0;
++}
++
++struct renesas_fw_ctx {
++ struct pci_dev *pdev;
++ const struct pci_device_id *id;
++ bool resume;
++ const struct renesas_fw_entry *entry;
++};
++
++static int xhci_pci_probe(struct pci_dev *pdev,
++ const struct pci_device_id *id);
++
++static bool renesas_check_rom(struct pci_dev *pdev)
++{
++ u16 rom_status;
++ int retval;
++
++ /* 1. Check if external ROM exists */
++ retval = pci_read_config_word(pdev, RENESAS_ROM_STATUS, &rom_status);
++ if (retval)
++ return false;
++
++ rom_status &= RENESAS_ROM_STATUS_ROM_EXISTS;
++ if (rom_status) {
++ dev_dbg(&pdev->dev, "External ROM exists\n");
++ return true; /* External ROM exists */
++ }
++
++ return false;
++}
++
++static void renesas_rom_erase(struct pci_dev *pdev)
++{
++ int retval, i;
++ u8 status;
++
++ dev_dbg(&pdev->dev, "Performing ROM Erase...\n");
++ retval = pci_write_config_dword(pdev, RENESAS_DATA0,
++ RENESAS_ROM_ERASE_MAGIC);
++ if (retval) {
++ dev_err(&pdev->dev, "ROM erase, magic word write failed: %d\n",
++ pcibios_err_to_errno(retval));
++ return;
++ }
++
++ retval = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
++ if (retval) {
++ dev_err(&pdev->dev, "ROM status read failed: %d\n",
++ pcibios_err_to_errno(retval));
++ return;
++ }
++ status |= RENESAS_ROM_STATUS_ERASE;
++ retval = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, status);
++ if (retval) {
++ dev_err(&pdev->dev, "ROM erase set word write failed\n");
++ return;
++ }
++
++ /* sleep a bit while ROM is erased */
++ msleep(20);
++
++ for (i = 0; i < RENESAS_RETRY; i++) {
++ retval = pci_read_config_byte(pdev, RENESAS_ROM_STATUS,
++ &status);
++ status &= RENESAS_ROM_STATUS_ERASE;
++ if (!status)
++ break;
++
++ mdelay(RENESAS_DELAY);
++ }
++
++ if (i == RENESAS_RETRY)
++ dev_dbg(&pdev->dev, "Chip erase timedout: %x\n", status);
++
++ dev_dbg(&pdev->dev, "ROM Erase... Done success\n");
++}
++
++static bool renesas_download_rom(struct pci_dev *pdev,
++ const u32 *fw, size_t step)
++{
++ bool data0_or_data1;
++ u8 fw_status;
++ size_t i;
++ int err;
++
++ /*
++ * The hardware does alternate between two 32-bit pages.
++ * (This is because each row of the firmware is 8 bytes).
++ *
++ * for even steps we use DATA0, for odd steps DATA1.
++ */
++ data0_or_data1 = (step & 1) == 1;
++
++ /* Read "Set DATAX" and confirm it is cleared. */
++ for (i = 0; i < RENESAS_RETRY; i++) {
++ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS_MSB,
++ &fw_status);
++ if (err) {
++ dev_err(&pdev->dev, "Read ROM Status failed: %d\n",
++ pcibios_err_to_errno(err));
++ return false;
++ }
++ if (!(fw_status & BIT(data0_or_data1)))
++ break;
++
++ udelay(RENESAS_DELAY);
++ }
++ if (i == RENESAS_RETRY) {
++ dev_err(&pdev->dev, "Timeout for Set DATAX step: %zd\n", step);
++ return false;
++ }
++
++ /*
++ * Write FW data to "DATAX".
++ * "LSB is left" => force little endian
++ */
++ err = pci_write_config_dword(pdev, data0_or_data1 ?
++ RENESAS_DATA1 : RENESAS_DATA0,
++ (__force u32)cpu_to_le32(fw[step]));
++ if (err) {
++ dev_err(&pdev->dev, "Write to DATAX failed: %d\n",
++ pcibios_err_to_errno(err));
++ return false;
++ }
++
++ udelay(100);
++
++ /* Set "Set DATAX". */
++ err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS_MSB,
++ BIT(data0_or_data1));
++ if (err) {
++ dev_err(&pdev->dev, "Write config for DATAX failed: %d\n",
++ pcibios_err_to_errno(err));
++ return false;
++ }
++
++ return true;
++}
++
++static bool renesas_setup_rom(struct pci_dev *pdev, const struct firmware *fw)
++{
++ const u32 *fw_data = (const u32 *)fw->data;
++ int err, i;
++ u8 status;
++
++ /* 2. Write magic word to Data0 */
++ err = pci_write_config_dword(pdev, RENESAS_DATA0,
++ RENESAS_ROM_WRITE_MAGIC);
++ if (err)
++ return false;
++
++ /* 3. Set External ROM access */
++ err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS,
++ RENESAS_ROM_STATUS_ACCESS);
++ if (err)
++ goto remove_bypass;
++
++ /* 4. Check the result */
++ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
++ if (err)
++ goto remove_bypass;
++ status &= GENMASK(6, 4);
++ if (status) {
++ dev_err(&pdev->dev,
++ "setting external rom failed: %x\n", status);
++ goto remove_bypass;
++ }
++
++ /* 5 to 16 Write FW to DATA0/1 while checking SetData0/1 */
++ for (i = 0; i < fw->size / 4; i++) {
++ err = renesas_download_rom(pdev, fw_data, i);
++ if (!err) {
++ dev_err(&pdev->dev,
++ "ROM Download Step %d failed at position %d bytes\n",
++ i, i * 4);
++ goto remove_bypass;
++ }
++ }
++
++ /*
++ * wait till DATA0/1 is cleared
++ */
++ for (i = 0; i < RENESAS_RETRY; i++) {
++ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS_MSB,
++ &status);
++ if (err)
++ goto remove_bypass;
++ if (!(status & (BIT(0) | BIT(1))))
++ break;
++
++ udelay(RENESAS_DELAY);
++ }
++ if (i == RENESAS_RETRY) {
++ dev_err(&pdev->dev, "Final Firmware ROM Download step timed out\n");
++ goto remove_bypass;
++ }
++
++ /* 17. Remove bypass */
++ err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, 0);
++ if (err)
++ return false;
++
++ udelay(10);
++
++ /* 18. check result */
++ for (i = 0; i < RENESAS_RETRY; i++) {
++ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
++ if (err) {
++ dev_err(&pdev->dev, "Read ROM status failed:%d\n",
++ pcibios_err_to_errno(err));
++ return false;
++ }
++ status &= RENESAS_ROM_STATUS_RESULT;
++ if (status == RENESAS_ROM_STATUS_SUCCESS) {
++ dev_dbg(&pdev->dev, "Download ROM success\n");
++ break;
++ }
++ udelay(RENESAS_DELAY);
++ }
++ if (i == RENESAS_RETRY) { /* Timed out */
++ dev_err(&pdev->dev,
++ "Download to external ROM TO: %x\n", status);
++ return false;
++ }
++
++ dev_dbg(&pdev->dev, "Download to external ROM scuceeded\n");
++
++ /* Last step set Reload */
++ err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS,
++ RENESAS_ROM_STATUS_RELOAD);
++ if (err) {
++ dev_err(&pdev->dev, "Set ROM execute failed: %d\n",
++ pcibios_err_to_errno(err));
++ return false;
++ }
++
++ /*
++ * wait till Reload is cleared
++ */
++ for (i = 0; i < RENESAS_RETRY; i++) {
++ err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
++ if (err)
++ return false;
++ if (!(status & RENESAS_ROM_STATUS_RELOAD))
++ break;
++
++ udelay(RENESAS_DELAY);
++ }
++ if (i == RENESAS_RETRY) {
++ dev_err(&pdev->dev, "ROM Exec timed out: %x\n", status);
++ return false;
++ }
++
++ return true;
++
++remove_bypass:
++ pci_write_config_byte(pdev, RENESAS_ROM_STATUS, 0);
++ return false;
++}
++
++static void renesas_fw_callback(const struct firmware *fw,
++ void *context)
++{
++ struct renesas_fw_ctx *ctx = context;
++ struct pci_dev *pdev = ctx->pdev;
++ struct device *parent = pdev->dev.parent;
++ const struct renesas_fw_entry *next_entry;
++ bool rom;
++ int err;
++
++ if (!fw) {
++ dev_err(&pdev->dev, "firmware failed to load\n");
++ /*
++ * we didn't find firmware, check if we have another
++ * entry for this device
++ */
++ next_entry = renesas_get_next_entry(ctx->pdev, ctx->entry);
++ if (next_entry) {
++ ctx->entry = next_entry;
++ dev_dbg(&pdev->dev, "Found next entry, requesting: %s\n",
++ next_entry->firmware_name);
++ request_firmware_nowait(THIS_MODULE, 1,
++ next_entry->firmware_name,
++ &pdev->dev, GFP_KERNEL,
++ ctx, renesas_fw_callback);
++ return;
++ } else {
++ goto cleanup;
++ }
++ }
++
++ err = renesas_fw_verify(pdev, fw->data, fw->size);
++ if (err)
++ goto cleanup;
++
++ /* Check if the device has external ROM */
++ rom = renesas_check_rom(pdev);
++ if (rom) {
++ /* perfrom chip erase first */
++ renesas_rom_erase(pdev);
++
++ /* lets try loading fw on ROM first */
++ rom = renesas_setup_rom(pdev, fw);
++ if (!rom) {
++ dev_err(&pdev->dev,
++ "ROM load failed, falling back on FW load\n");
++ } else {
++ dev_dbg(&pdev->dev, "ROM load done..\n");
++
++ release_firmware(fw);
++ goto do_probe;
++ }
++ }
++
++ err = renesas_fw_download(pdev, fw);
++ release_firmware(fw);
++ if (err) {
++ dev_err(&pdev->dev, "firmware failed to download (%d).", err);
++ goto cleanup;
++ }
++
++do_probe:
++ if (ctx->resume)
++ return;
++
++ err = xhci_pci_probe(pdev, ctx->id);
++ if (!err) {
++ /* everything worked */
++ devm_kfree(&pdev->dev, ctx);
++ return;
++ }
++
++cleanup:
++ /* in case of an error - fall through */
++ dev_info(&pdev->dev, "Unloading driver");
++
++ if (parent)
++ device_lock(parent);
++
++ device_release_driver(&pdev->dev);
++
++ if (parent)
++ device_unlock(parent);
++
++ pci_dev_put(pdev);
++}
++
++static int renesas_fw_alive_check(struct pci_dev *pdev)
++{
++ const struct renesas_fw_entry *entry;
++
++ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
++ entry = renesas_needs_fw_dl(pdev);
++ if (!entry)
++ return 0;
++
++ return renesas_fw_check_running(pdev);
++}
++
++static int renesas_fw_download_to_hw(struct pci_dev *pdev,
++ const struct pci_device_id *id,
++ bool do_resume)
++{
++ const struct renesas_fw_entry *entry;
++ struct renesas_fw_ctx *ctx;
++ int err;
++
++ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
++ entry = renesas_needs_fw_dl(pdev);
++ if (!entry)
++ return 0;
++
++ err = renesas_fw_check_running(pdev);
++ /* Continue ahead, if the firmware is already running. */
++ if (err == 0)
++ return 0;
++
++ if (err != 1)
++ return err;
++
++ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
++ if (!ctx)
++ return -ENOMEM;
++ ctx->pdev = pdev;
++ ctx->resume = do_resume;
++ ctx->id = id;
++ ctx->entry = entry;
++
++ pci_dev_get(pdev);
++ err = request_firmware_nowait(THIS_MODULE, 1, entry->firmware_name,
++ &pdev->dev, GFP_KERNEL,
++ ctx, renesas_fw_callback);
++ if (err) {
++ pci_dev_put(pdev);
++ return err;
++ }
++
++ /*
++ * The renesas_fw_callback() callback will continue the probe
++ * process, once it aquires the firmware.
++ */
++ return 1;
++}
++
++static int renesas_check_if_fw_dl_is_needed(struct pci_dev *pdev)
++{
++ int err;
++ u8 fw_state;
++
++ /*
++ * Only the uPD720201K8-711-BAC-A or uPD720202K8-711-BAA-A
++ * are listed in R19UH0078EJ0500 Rev.5.00 as devices which
++ * need a firmware in order to work.
++ *
++ * - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
++ * - uPD720201 ES 2.0 sample whose revision ID is 2.
++ * - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
++ */
++ if (!((pdev->vendor == PCI_VENDOR_ID_RENESAS) &&
++ ((pdev->device == 0x0015 && pdev->revision == 0x02) ||
++ (pdev->device == 0x0014 &&
++ (pdev->revision == 0x02 || pdev->revision == 0x03)))))
++ return 0;
++
++ /* Check if device has ROM and loaded, if so skip everything */
++ err = renesas_check_rom_state(pdev);
++ if (!err)
++ return err;
++
++ /*
++ * Test if the firmware was uploaded and is running.
++ * As most BIOSes will initialize the device for us.
++ */
++ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_state);
++ if (err)
++ return pcibios_err_to_errno(err);
++
++ /* Check the "Result Code" Bits (6:4) and act accordingly */
++ switch (fw_state & RENESAS_FW_STATUS_RESULT) {
++ case 0: /* No result yet */
++ dev_err(&pdev->dev, "FW is not ready/loaded yet.");
++ return -ENODEV;
++
++ case RENESAS_FW_STATUS_SUCCESS:
++ dev_dbg(&pdev->dev, "FW is ready.");
++ return 0;
++
++ case RENESAS_FW_STATUS_ERROR:
++ dev_err(&pdev->dev, "HW is in an error state.");
++ return -ENODEV;
++
++ default: /* All other states are marked as "Reserved states" */
++ dev_err(&pdev->dev, "HW is in an invalid state (%x).",
++ (fw_state & 0x70) >> 4);
++ return -EINVAL;
++ }
++}
++
+ /* called during probe() after chip reset completes */
+ static int xhci_pci_setup(struct usb_hcd *hcd)
+ {
+@@ -300,6 +1207,27 @@ static int xhci_pci_probe(struct pci_dev
+ struct hc_driver *driver;
+ struct usb_hcd *hcd;
+
++ /*
++ * Check if this device is a RENESAS uPD720201/2 device.
++ * Otherwise, we can continue with xhci_pci_probe as usual.
++ */
++ retval = renesas_fw_download_to_hw(dev, id, false);
++ switch (retval) {
++ case 0:
++ break;
++
++ case 1: /* let it load the firmware and recontinue the probe. */
++ return 0;
++
++ default:
++ return retval;
++ };
++
++ /* Check if this device is a RENESAS uPD720201/2 device. */
++ retval = renesas_check_if_fw_dl_is_needed(dev);
++ if (retval)
++ return retval;
++
+ driver = (struct hc_driver *)id->driver_data;
+
+ /* Prevent runtime suspending between USB-2 and USB-3 initialization */
+@@ -361,6 +1289,16 @@ static void xhci_pci_remove(struct pci_d
+ {
+ struct xhci_hcd *xhci;
+
++ if (renesas_fw_alive_check(dev)) {
++ /*
++ * bail out early, if this was a renesas device w/o FW.
++ * Else we might hit the NMI watchdog in xhci_handsake
++ * during xhci_reset as part of the driver's unloading.
++ * which we forced in the renesas_fw_callback().
++ */
++ return;
++ }
++
+ xhci = hcd_to_xhci(pci_get_drvdata(dev));
+ xhci->xhc_state |= XHCI_STATE_REMOVING;
+ if (xhci->shared_hcd) {
+@@ -484,6 +1422,11 @@ static int xhci_pci_resume(struct usb_hc
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+ usb_enable_intel_xhci_ports(pdev);
+
++ /* Check if this device is a RENESAS uPD720201/2 device. */
++ retval = renesas_check_if_fw_dl_is_needed(pdev);
++ if (retval)
++ return retval;
++
+ if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
+ xhci_ssic_port_unused_quirk(hcd, false);
+
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-02 20:43:09 +0000