1 files changed, 0 insertions, 189 deletions
diff --git a/target/linux/apm821xx/dts/apollo3g.dtsi b/target/linux/apm821xx/dts/apollo3g.dtsi
deleted file mode 100644
index e88973f8d2..0000000000
--- a/target/linux/apm821xx/dts/apollo3g.dtsi
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
- * (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-#include "apm82181.dtsi"
-
-/ {
-	compatible = "amcc,apollo3g";
-
-	aliases {
-		serial0 = &UART0;
-		led-boot = &status;
-		led-failsafe = &status;
-		led-running = &status;
-		led-upgrade = &status;
-	};
-};
-
-&POB0 {
-	ebc {
-		nor_flash@0,0 {
-			status = "okay";
-			compatible = "amd,s29gl512n", "jedec-probe", "cfi-flash", "mtd-rom";
-			bank-width = <1>;
-			reg = <0x00000000 0x00000000 0x00080000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				/* Part of bootrom - Don't use it without a jump */
-				label = "free";
-				reg = <0x00000000 0x0001e000>;
-			};
-
-			partition@1 {
-				label = "env";
-				reg = <0x0001e000 0x00002000>;
-			};
-
-			partition@2 {
-				label = "uboot";
-				reg = <0x00020000 0x00050000>;
-			};
-		};
-	};
-
-	GPIO1: gpio1@e0000000 {
-		compatible = "wd,mbl-gpio", "ti,74273";
-		reg-names = "dat";
-		reg = <0xe0000000 0x1>;
-		#gpio-cells = <2>;
-		gpio-controller;
-
-		enable-phy {
-			/* toggle to reset EMAC PHY */
-			gpio-hog;
-			line-name = "enable EMAC PHY";
-			gpios = <0 GPIO_ACTIVE_LOW>;
-			output-low;
-		};
-
-		enable-button {
-			/* Defined in u-boot as: NOT_NOR
-			 * "enables features other than NOR
-			 * specifically, the buffer at CS2"
-			 * (button).
-			 *
-			 * Note: This option is disabled as
-			 * it prevents the system from being
-			 * rebooted successfully.
-			 */
-
-			gpio-hog;
-			line-name = "Enable Reset Button, disable NOR";
-			gpios = <1 GPIO_ACTIVE_HIGH>;
-			output-low;
-		};
-
-		enable-usb {
-			gpio-hog;
-			line-name = "Power USB Core";
-			gpios = <2 GPIO_ACTIVE_LOW>;
-			output-low;
-			status = "disabled";
-		};
-
-		enable-port1 {
-			gpio-hog;
-			line-name = "Power Drive Port 1";
-			gpios = <3 GPIO_ACTIVE_LOW>;
-			output-low;
-		};
-
-		enable-port0 {
-			gpio-hog;
-			line-name = "Power Drive Port 0";
-			gpios = <7 GPIO_ACTIVE_LOW>;
-			output-low;
-			status = "disabled";
-		};
-	};
-
-	GPIO2: gpio2@e0100000 {
-		compatible = "wd,mbl-gpio", "ti,74244";
-		reg-names = "dat";
-		reg = <0xe0100000 0x1>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		no-output;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		failsafe: power-red {
-			label = "mbl:red:power";
-			gpios = <&GPIO1 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "panic";
-		};
-
-		status: power-green {
-			label = "mbl:green:power";
-			gpios = <&GPIO1 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		power-blue {
-			label = "mbl:blue:power";
-			gpios = <&GPIO1 6 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_keys_polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <60>;	/* 3 * 20 = 60ms */
-		autorepeat;
-
-		button@1 {
-			label = "Reset button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&GPIO2 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&CRYPTO {
-	status = "okay";
-};
-
-&PKA {
-	status = "okay";
-};
-
-&TRNG {
-	status = "okay";
-};
-
-&SATA1 {
-	status = "okay";
-};
-
-&UART0 {
-	status = "okay";
-};
-
-&EMAC0 {
-	status = "okay";
-
-	phy-map = <0x2>;
-	phy-address = <0x1>;
-	phy-handle = <&phy>;
-
-	mdio {
-		phy: phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-		};
-	};
-};
-
-&SATA1 {
-	status = "okay";
-};