diff options
Diffstat (limited to 'target/linux/apm821xx/dts/MR24.dts')
-rw-r--r-- | target/linux/apm821xx/dts/MR24.dts | 472 |
1 files changed, 95 insertions, 377 deletions
diff --git a/target/linux/apm821xx/dts/MR24.dts b/target/linux/apm821xx/dts/MR24.dts index 1e186e6f04..8d20872c3f 100644 --- a/target/linux/apm821xx/dts/MR24.dts +++ b/target/linux/apm821xx/dts/MR24.dts @@ -12,422 +12,140 @@ /dts-v1/; +#include "apm82181.dtsi" + / { - #address-cells = <2>; - #size-cells = <1>; model = "Meraki MR24 Access Point"; compatible = "meraki,ikarem"; - dcr-parent = <&{/cpus/cpu@0}>; aliases { - ethernet0 = &EMAC0; - serial0 = &UART0; + serial0 = &UART1; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,apm821xx"; - reg = <0x00000000>; - clock-frequency = <0>; /* Filled in by U-Boot */ - timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <32768>; - d-cache-size = <32768>; - dcr-controller; - dcr-access-method = "native"; - next-level-cache = <&L2C0>; - }; + chosen { + linux,stdout-path = "/plb/opb/serial@ef600400"; }; - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ - }; +}; - UIC0: interrupt-controller0 { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - UIC1: interrupt-controller1 { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <1>; - dcr-reg = <0x0d0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; +&CRYPTO { + status = "okay"; +}; - UIC2: interrupt-controller2 { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <2>; - dcr-reg = <0x0e0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; +&PKA { + status = "okay"; +}; - UIC3: interrupt-controller3 { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <3>; - dcr-reg = <0x0f0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; +&TRNG { + status = "okay"; +}; - /* KPH check the following */ - OCM: ocm@400040000 { - compatible = "ibm,ocm"; +&EBC0 { + /* Ikarem has 32MB of NAND */ + ndfc@1,0 { status = "okay"; - cell-index = <1>; - /* configured in U-Boot */ - reg = <4 0x00040000 0x8000>; /* 32K */ - }; - - SDR0: sdr { - compatible = "ibm,sdr-apm821xx"; - dcr-reg = <0x00e 0x002>; - }; - - CPR0: cpr { - compatible = "ibm,cpr-apm821xx"; - dcr-reg = <0x00c 0x002>; - }; - - L2C0: l2c { - compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache"; - dcr-reg = <0x020 0x008 - 0x030 0x008>; - cache-line-size = <32>; - cache-size = <262144>; - interrupt-parent = <&UIC1>; - interrupts = <11 1>; - }; - - /* kph check the below */ - CPM0: cpm { - compatible = "ibm,cpm-apm821xx", "ibm,cpm"; - cell-index = <0>; - dcr-reg = <0x160 0x003>; - pm-cpu = <0x02000000>; - pm-doze = <0x302570F0>; - pm-nap = <0x302570F0>; - pm-deepsleep = <0x302570F0>; - pm-iic-device = <&IIC0>; - pm-emac-device = <&EMAC0>; - }; - - plb { - compatible = "ibm,plb4"; - #address-cells = <2>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by U-Boot */ - - SDRAM0: sdram { - compatible = "ibm,sdram-apm821xx"; - dcr-reg = <0x010 0x002>; - }; - - /* kph check the below */ - CRYPTO: crypto@180000 { - compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto"; - reg = <4 0x00180000 0x80400>; - interrupt-parent = <&UIC0>; - interrupts = <0x1d 0x4>; - }; - - /* kph check the below */ - PKA: pka@114000 { - device_type = "pka"; - compatible = "ppc4xx-pka", "amcc,ppc4xx-pka"; - reg = <4 0x00114000 0x4000>; - interrupt-parent = <&UIC0>; - interrupts = <0x14 0x2>; - }; - - /* kph check the below */ - TRNG: trng@110000 { - compatible = "ppc4xx-trng", "amcc,ppc460ex-rng"; - reg = <4 0x00110000 0x50>; - interrupt-parent = <&UIC1>; - interrupts = <0x3 0x2>; - }; - - MAL0: mcmal { - compatible = "ibm,mcmal2"; - descriptor-memory = "ocm"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <1>; - num-rx-chans = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-parent = <&UIC2>; - interrupts = < /*TXEOB*/ 0x6 0x4 - /*RXEOB*/ 0x7 0x4 - /*SERR*/ 0x3 0x4 - /*TXDE*/ 0x4 0x4 - /*RXDE*/ 0x5 0x4>; - }; - - POB0: opb { - compatible = "ibm,opb"; + /* 32 MiB NAND Flash */ + nand { #address-cells = <1>; #size-cells = <1>; - ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; - clock-frequency = <0>; /* Filled in by U-Boot */ - EBC0: ebc { - compatible = "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - clock-frequency = <0>; /* Filled in by U-Boot */ - /* ranges property is supplied by U-Boot */ - ranges = < 0x00000003 0x00000000 0xe0000000 0x8000000>; - interrupts = <0x6 0x4>; - interrupt-parent = <&UIC1>; - - /* Ikarem has 32MB of NAND */ - ndfc@1,0 { - compatible = "ibm,ndfc"; - reg = <00000003 00000000 00000400>; - ccr = <0x00001000>; - bank-settings = <0x80002222>; - #address-cells = <1>; - #size-cells = <1>; - /* 32 MiB NAND Flash */ - nand { - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x00170000>; - read-only; - }; - partition@170000 { - label = "oops"; - reg = <0x00170000 0x00010000>; - }; - partition@180000 { - label = "ubi"; - reg = <0x00180000 0x01e80000>; - }; - }; - }; - }; - - UART0: serial@ef600400 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600400 0x00000008>; - virtual-reg = <0xef600400>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; /* Filled in by U-Boot */ - interrupt-parent = <&UIC0>; - interrupts = <0x1 0x4>; + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00170000>; + read-only; }; - GPIO0: gpio@ef600b00 { - compatible = "ibm,ppc4xx-gpio"; - reg = <0xef600b00 0x00000048>; - #gpio-cells = <2>; - gpio-controller; + partition@170000 { + label = "oops"; + reg = <0x00170000 0x00010000>; }; - gpio-leds { - compatible = "gpio-leds"; - power-green { - label = "mr24:green:power"; - gpios = <&GPIO0 18 1>; - }; - power-orange { - label = "mr24:orange:power"; - gpios = <&GPIO0 19 1>; - }; - lan { - label = "mr24:green:wan"; - gpios = <&GPIO0 17 1>; - }; - ssi-0 { - label = "mr24:green:wifi1"; - gpios = <&GPIO0 23 1>; - }; - ssi-1 { - label = "mr24:green:wifi2"; - gpios = <&GPIO0 22 1>; - }; - ssi-2 { - label = "mr24:green:wifi3"; - gpios = <&GPIO0 21 1>; - }; - ssi-3 { - label = "mr24:green:wifi4"; - gpios = <&GPIO0 20 1>; - }; + partition@180000 { + label = "ubi"; + reg = <0x00180000 0x01e80000>; }; + }; + }; +}; - gpio_keys_polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <60>; /* 3 * 20 = 60ms */ - autorepeat; - button@1 { - label = "Reset button"; - linux,code = <0x198>; /* KEY_RESTART */ - gpios = <&GPIO0 16 1>; - }; - }; +&UART1 { + status = "okay"; +}; - IIC0: i2c@ef600700 { - compatible = "ibm,iic"; - reg = <0xef600700 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x2 0x4>; - #address-cells = <1>; - #size-cells = <0>; - /* Boot ROM is at 0x52-0x53, do not touch */ - /* Unknown chip at 0x6e, not sure what it is */ - }; +&GPIO0 { + status = "okay"; +}; - IIC1: i2c@ef600800 { - compatible = "ibm,iic"; - reg = <0xef600800 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x3 0x4>; - }; +&IIC0 { + status = "okay"; + /* Boot ROM is at 0x52-0x53, do not touch */ + /* Unknown chip at 0x6e, not sure what it is */ +}; - RGMII0: emac-rgmii@ef601500 { - compatible = "ibm,rgmii"; - reg = <0xef601500 0x00000008>; - has-mdio; - }; +&EMAC0 { + status = "okay"; +}; - TAH0: emac-tah@ef601350 { - compatible = "ibm,tah"; - reg = <0xef601350 0x00000030>; - }; +&POB0 { + gpio-leds { + compatible = "gpio-leds"; - EMAC0: ethernet@ef600c00 { - device_type = "network"; - compatible = "ibm,emac-apm821xx", "ibm,emac4sync"; - interrupt-parent = <&EMAC0>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4 - /*Wake*/ 0x1 &UIC2 0x14 0x4>; - reg = <0xef600c00 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <9000>; - rx-fifo-size = <16384>; - tx-fifo-size = <2048>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <0>; - tah-device = <&TAH0>; - tah-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; + power-green { + label = "mr24:green:power"; + gpios = <&GPIO0 18 GPIO_ACTIVE_LOW>; }; - PCIE0: pciex@d00000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pciex-apm821xx", "ibm,plb-pciex"; - primary; - port = <0x0>; /* port number */ - reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ - 0x0000000c 0x08010000 0x00001000>; /* Registers */ - dcr-reg = <0x100 0x020>; - sdr-base = <0x300>; + power-orange { + label = "mr24:orange:power"; + gpios = <&GPIO0 19 GPIO_ACTIVE_LOW>; + }; - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 - 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000 - 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + lan { + label = "mr24:green:wan"; + gpios = <&GPIO0 17 GPIO_ACTIVE_LOW>; + }; - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + ssi-0 { + label = "mr24:green:wifi1"; + gpios = <&GPIO0 23 GPIO_ACTIVE_LOW>; + }; - /* This drives busses 40 to 0x7f */ - bus-range = <0x40 0x7f>; + ssi-1 { + label = "mr24:green:wifi2"; + gpios = <&GPIO0 22 GPIO_ACTIVE_LOW>; + }; - /* Legacy interrupts (note the weird polarity, the bridge seems - * to invert PCIe legacy interrupts). - * We are de-swizzling here because the numbers are actually for - * port of the root complex virtual P2P bridge. But I want - * to avoid putting a node for it in the tree, so the numbers - * below are basically de-swizzled numbers. - * The real slot is on idsel 0, so the swizzling is 1:1 - */ - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = < - 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */ - 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */ - 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */ - 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; + ssi-2 { + label = "mr24:green:wifi3"; + gpios = <&GPIO0 21 GPIO_ACTIVE_LOW>; }; - MSI: ppc4xx-msi@C10000000 { - compatible = "amcc,ppc4xx-msi", "ppc4xx-msi"; - reg = < 0xC 0x10000000 0x100 - 0xC 0x10000000 0x100>; - sdr-base = <0x36C>; - msi-data = <0x00004440>; - msi-mask = <0x0000ffe0>; - interrupts =<0 1 2 3 4 5 6 7>; - interrupt-parent = <&MSI>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - msi-available-ranges = <0x0 0x100>; - interrupt-map = < - 0 &UIC3 0x18 1 - 1 &UIC3 0x19 1 - 2 &UIC3 0x1A 1 - 3 &UIC3 0x1B 1 - 4 &UIC3 0x1C 1 - 5 &UIC3 0x1D 1 - 6 &UIC3 0x1E 1 - 7 &UIC3 0x1F 1 - >; + ssi-3 { + label = "mr24:green:wifi4"; + gpios = <&GPIO0 20 GPIO_ACTIVE_LOW>; }; }; - chosen { - linux,stdout-path = "/plb/opb/serial@ef600400"; + gpio_keys_polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <60>; /* 3 * 20 = 60ms */ + autorepeat; + + button@1 { + label = "Reset button"; + linux,code = <KEY_RESTART>; + gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>; + }; }; }; + +&PCIE0 { + status = "okay"; +}; + +&MSI { + status = "okay"; +}; |