diff options
Diffstat (limited to 'target/linux/amazon')
51 files changed, 0 insertions, 26097 deletions
diff --git a/target/linux/amazon/Makefile b/target/linux/amazon/Makefile deleted file mode 100644 index 9553da098c..0000000000 --- a/target/linux/amazon/Makefile +++ /dev/null @@ -1,27 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk - -ARCH:=mips -BOARD:=amazon -BOARDNAME:=Infineon Amazon -FEATURES:=squashfs broken -KERNEL_PATCHVER:=3.3 - -include $(INCLUDE_DIR)/target.mk - -define Target/Description - Build firmware images for Infineon Amazon boards -endef - -define Kernel/Prepare - $(call Kernel/Prepare/Default) - mkdir -p $(LINUX_DIR)/arch/mips/include/asm/amazon - $(CP) $(LINUX_DIR)/include/asm-mips/amazon/*.h $(LINUX_DIR)/arch/mips/include/asm/amazon -endef - -$(eval $(call BuildTarget)) diff --git a/target/linux/amazon/base-files/etc/config/network b/target/linux/amazon/base-files/etc/config/network deleted file mode 100644 index 9745944bab..0000000000 --- a/target/linux/amazon/base-files/etc/config/network +++ /dev/null @@ -1,18 +0,0 @@ -# Copyright (C) 2006 OpenWrt.org - -config interface loopback - option ifname lo - option proto static - option ipaddr 127.0.0.1 - option netmask 255.0.0.0 - -config interface lan - option ifname eth1 - option type bridge - option proto static - option ipaddr 192.168.1.1 - option netmask 255.255.255.0 - option ip6assign 60 - -config globals globals - option ula_prefix auto diff --git a/target/linux/amazon/config-3.3 b/target/linux/amazon/config-3.3 deleted file mode 100644 index d30e221e98..0000000000 --- a/target/linux/amazon/config-3.3 +++ /dev/null @@ -1,102 +0,0 @@ -CONFIG_ADM6996_SUPPORT=y -CONFIG_AMAZON=y -CONFIG_AMAZON_ASC_UART=y -CONFIG_AMAZON_MTD=y -CONFIG_AMAZON_NET_SW=y -CONFIG_AMAZON_PCI=y -CONFIG_AMAZON_WDT=y -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y -CONFIG_ARCH_DISCARD_MEMBLOCK=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/bin/sh" -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE_OVERRIDE=y -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CSRC_R4K=y -CONFIG_CSRC_R4K_LIB=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_GENERIC_HARDIRQS=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_WORK=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_STD_PC_SERIAL_PORT=y -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQ_CPU=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_KALLSYMS=y -CONFIG_MIPS=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -CONFIG_MIPS_MT_DISABLED=y -CONFIG_MTD_AMAZON_BUS_WIDTH_16=y -# CONFIG_MTD_AMAZON_BUS_WIDTH_32 is not set -# CONFIG_MTD_AMAZON_BUS_WIDTH_8 is not set -# CONFIG_MTD_AMAZON_FLASH_SIZE_16 is not set -# CONFIG_MTD_AMAZON_FLASH_SIZE_2 is not set -CONFIG_MTD_AMAZON_FLASH_SIZE_4=y -# CONFIG_MTD_AMAZON_FLASH_SIZE_8 is not set -CONFIG_MTD_CFI_ADV_OPTIONS=y -# CONFIG_MTD_CFI_GEOMETRY is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3 -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PERF_USE_VMALLOC=y -# CONFIG_PREEMPT_RCU is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250 is not set -CONFIG_SWAP_IO_SPACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_USB_ARCH_HAS_XHCI=y -CONFIG_USB_SUPPORT=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/amazon/files/arch/mips/amazon/Kconfig b/target/linux/amazon/files/arch/mips/amazon/Kconfig deleted file mode 100644 index 63055fc2aa..0000000000 --- a/target/linux/amazon/files/arch/mips/amazon/Kconfig +++ /dev/null @@ -1,67 +0,0 @@ -# copyright 2007 john crispin <blogic@openwrt.org> - -menu "Amazon built-in" - -config AMAZON_ASC_UART - bool "Amazon asc uart" - select SERIAL_CORE - select SERIAL_CORE_CONSOLE - default y - -config AMAZON_PCI - bool "Amazon PCI support" - default y - select HW_HAS_PCI - select PCI - -config AMAZON_NET_SW - bool "Amazon network" - default y - -config AMAZON_WDT - bool "Amazon watchdog timer" - default y - -config AMAZON_MTD - bool "Amazon MTD map" - default y - -config ADM6996_SUPPORT - bool "Amazon ADM6996 Switch driver" - default y - -choice - prompt "Flash Size" - depends on AMAZON_MTD - -config MTD_AMAZON_FLASH_SIZE_2 - bool "2MB" - -config MTD_AMAZON_FLASH_SIZE_4 - bool "4MB" - -config MTD_AMAZON_FLASH_SIZE_8 - bool "8MB" - -config MTD_AMAZON_FLASH_SIZE_16 - bool "16MB" - -endchoice - -choice - prompt "Bus Width" - depends on AMAZON_MTD - -config MTD_AMAZON_BUS_WIDTH_8 - bool "8-bit" - -config MTD_AMAZON_BUS_WIDTH_16 - bool "16-bit" - -config MTD_AMAZON_BUS_WIDTH_32 - bool "32-bit" - -endchoice - - -endmenu diff --git a/target/linux/amazon/files/arch/mips/amazon/Makefile b/target/linux/amazon/files/arch/mips/amazon/Makefile deleted file mode 100644 index 47761a277a..0000000000 --- a/target/linux/amazon/files/arch/mips/amazon/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright 2007 openwrt.org -# John Crispin <blogic@openwrt.org> -# -# Makefile for Infineon Amazon -# -obj-y := dma-core.o interrupt.o prom.o setup.o board.o -obj-$(CONFIG_PCI) += pci.o - diff --git a/target/linux/amazon/files/arch/mips/amazon/board.c b/target/linux/amazon/files/arch/mips/amazon/board.c deleted file mode 100644 index 330cec608e..0000000000 --- a/target/linux/amazon/files/arch/mips/amazon/board.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2009 Hauke Mehrtens <hauke@hauke-m.de> - */ - - -#include <linux/platform_device.h> -#include <asm/amazon/irq.h> - -#define AMAZON_FLASH_START 0x13000000 -#define AMAZON_FLASH_MAX 0x1000000 - -static struct platform_device amazon_mii = { - .id = 0, - .name = "amazon_mii0", -// .dev = { -// .platform_data = amazon_ethaddr, -// } -}; - -static struct platform_device amazon_wdt = { - .id = 0, - .name = "amazon_wdt", -}; - -static struct platform_device amazon_asc = { - .id = 0, - .name = "amazon_asc", -}; - -static struct resource amazon_mtd_resource = { - .start = AMAZON_FLASH_START, - .end = AMAZON_FLASH_START + AMAZON_FLASH_MAX - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device amazon_mtd = { - .id = 0, - .name = "amazon_mtd", - .num_resources = 1, - .resource = &amazon_mtd_resource, -}; - - -struct platform_device *amazon_devs[] = { - &amazon_mii, &amazon_mtd, &amazon_wdt, &amazon_asc -}; - - -int __init amazon_init_devices(void) -{ - printk(KERN_INFO ""); - return platform_add_devices(amazon_devs, 4); -} - -arch_initcall(amazon_init_devices); diff --git a/target/linux/amazon/files/arch/mips/amazon/dma-core.c b/target/linux/amazon/files/arch/mips/amazon/dma-core.c deleted file mode 100644 index 8cb4085202..0000000000 --- a/target/linux/amazon/files/arch/mips/amazon/dma-core.c +++ /dev/null @@ -1,1462 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - */ -//----------------------------------------------------------------------- -/* - * Description: - * Driver for Infineon Amazon DMA - */ -//----------------------------------------------------------------------- -/* Author: Wu Qi Ming[Qi-Ming.Wu@infineon.com] - * Created: 7-April-2004 - */ -//----------------------------------------------------------------------- -/* History - * Last changed on: 4-May-2004 - * Last changed by: <peng.liu@infineon.com> - * Reason: debug - */ -//----------------------------------------------------------------------- -/* Last changed on: 03-Dec-2004 - * Last changed by: peng.liu@infineon.com - * Reason: recover from TPE bug - */ - -//000004:fchang 2005/6/2 Modified by Linpeng as described below -//----------------------------------------------------------------------- -/* Last changed on: 28-Jan-2004 - * Last changed by: peng.liu@infineon.com - * Reason: - * - handle "out of memory" bug - */ -//000003:tc.chen 2005/06/16 fix memory leak when Tx buffer full (heaving traffic). -//507261:tc.chen 2005/07/26 re-organize code address map to improve performance. - -#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS) -#define MODVERSIONS -#endif - -#if defined(MODVERSIONS) && !defined(__GENKSYMS__) -#include <linux/modversions.h> -#endif - -#ifndef EXPORT_SYMTAB -#define EXPORT_SYMTAB /* need this one 'cause we export symbols */ -#endif - -#undef DMA_NO_POLLING - -/* no TX interrupt handling */ -#define NO_TX_INT -/* need for DMA workaround */ -#undef AMAZON_DMA_TPE_AAL5_RECOVERY - -#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY -#define MAX_SYNC_FAILS 1000000 // 000004:fchang -unsigned int dma_sync_fails = 0; -unsigned int total_dma_tpe_reset = 0; -int (*tpe_reset) (void); -int (*tpe_start) (void); -int (*tpe_inject) (void); -#endif // AMAZON_DMA_TPE_AAL5_RECOVERY - - -#include <linux/version.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/fs.h> -#include <linux/errno.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> -#include <linux/mm.h> -#include <linux/tty.h> -#include <linux/selection.h> -#include <linux/kmod.h> -#include <linux/vmalloc.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <asm/uaccess.h> -#include <linux/errno.h> -#include <asm/io.h> - -#include <asm/amazon/amazon.h> -#include <asm/amazon/irq.h> -#include <asm/amazon/amazon_dma.h> -#include "dma-core.h" - -#define AMAZON_DMA_EMSG(fmt, args...) printk( KERN_ERR "%s: " fmt,__FUNCTION__, ## args) - -static irqreturn_t dma_interrupt(int irq, void *dev_id); -extern void mask_and_ack_amazon_irq(unsigned int irq_nr); - -/***************************************** global data *******************************************/ -u64 *g_desc_list; -dev_list *g_current_dev = NULL; -dev_list *g_head_dev = NULL; -dev_list *g_tail_dev = NULL; -channel_info g_log_chan[CHAN_TOTAL_NUM + 1]; -struct proc_dir_entry *g_amazon_dma_dir; -static u8 rx_chan_list_len = 0; -static u8 tx_chan_list_len = 0; -static int rx_chan_list[RX_CHAN_NUM + 1]; -static int tx_chan_list[TX_CHAN_NUM + 1]; -static u32 comb_isr_mask[CHAN_TOTAL_NUM]; - -static inline int is_rx_chan(int chan_no) -/*judge if this is an rx channel*/ -{ - int result = 0; - if (chan_no < RX_CHAN_NUM) - result = 1; - return result; -} - -/* Ugly, Channel ON register is badly mapped to channel no. */ -static u8 ch_on_mapping[CHAN_TOTAL_NUM] = - { 0, 1, 2, 3, 6, 7, 10, 4, 5, 8, 9, 11 }; - -/* Brief: check wether the chan_no is legal - * Parameter: chan_no: logical channel number - * Return: 0 if is not valid - * 1 if is valid - */ -static inline int is_valid_dma_ch(int chan_no) -{ - return ((chan_no >= 0) && (chan_no < CHAN_TOTAL_NUM)); -} - -/* Brief: check whether a channel is open through Channel ON register - * Parameter: chan_no: logical channel number - * Return: 1 channel is open - * 0 not yet - * EINVAL: invalid parameter - */ -static inline int is_channel_open(int chan_no) -{ - return (AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) & - (1 << ch_on_mapping[chan_no])); -} - -/* Brief: add a list entry - * Description: - * always add to the tail and no redundancy allowed. (i.e. entries are unique) - * 0 : entry deleted - * <0 : not deleted (due to not unique) - */ -static inline int _add_list_entry(int *list, int size_of_list, int entry) -{ - int i; - for (i = 0; i < size_of_list; i++) { - if (list[i] == entry) - break; - if (list[i] < 0) { - list[i] = entry; - return 0; - } - } - return -1; -} - -/* Brief: delete a list entry - * Description: - * find the entry and remove it. shift all entries behind it one step forward if necessary\ - * Return: - * 0 : entry deleted - * <0 : not deleted (due to not found?) - */ -static inline int _delete_list_entry(int *list, int size_of_list, - int entry) -{ - int i, j; - for (i = 0; i < size_of_list; i++) { - if (list[i] == entry) { - for (j = i; j < size_of_list; j++) { - list[j] = list[j + 1]; - if (list[j + 1] < 0) { - break; - } - } - return 0; - } - } - return -1; -} - -/* Brief: enable a channel through Channel ON register - * Parameter: chan_no: logical channel number - * Description: - * Please don't open a channel without a valid descriptor (hardware pitfall) - */ -static inline void open_channel(int chan_no) -{ - AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) |= (1 << ch_on_mapping[chan_no]); - if (is_rx_chan(chan_no)) { - if (_add_list_entry(rx_chan_list, RX_CHAN_NUM, chan_no) == 0) { - rx_chan_list_len++; - } else { - AMAZON_DMA_DMSG("cannot add chan %d to open list\n", chan_no); - } - } else { - if (_add_list_entry(tx_chan_list, TX_CHAN_NUM, chan_no) == 0) { - tx_chan_list_len++; - } else { - AMAZON_DMA_DMSG("cannot add chan %d to open list\n", chan_no); - } - } -} - -/* Brief: disable a channel through Channel ON register - * Parameter: chan_no: logical channel number - */ - -static inline void close_channel(int chan_no) -{ - AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) &= ~(1 << ch_on_mapping[chan_no]); - if (is_rx_chan(chan_no)) { - if (_delete_list_entry(rx_chan_list, RX_CHAN_NUM, chan_no) == 0) { - rx_chan_list_len--; - } else { - AMAZON_DMA_DMSG("cannot remove chan %d from open list \n", - chan_no); - } - } else { - if (_delete_list_entry(tx_chan_list, TX_CHAN_NUM, chan_no) == 0) { - tx_chan_list_len--; - } else { - AMAZON_DMA_DMSG("cannot remove chan %d from open list \n", - chan_no); - } - } -} - -/* Brief: clear RX interrupt - */ -inline void rx_chan_clear_isr(int chan_no) -{ -#ifdef DMA_NO_POLLING - AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + chan_no * AMAZON_DMA_CH_STEP) = - (AMAZON_DMA_REG32 - (AMAZON_DMA_CH0_ISR + - chan_no * - AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP | DMA_ISR_CMDCPT - | DMA_ISR_DURR)); -#else - AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + chan_no * AMAZON_DMA_CH_STEP) = - (AMAZON_DMA_REG32 - (AMAZON_DMA_CH0_ISR + - chan_no * - AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP | - DMA_ISR_CMDCPT)); -#endif -} - -#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY -/* Brief: hacking function, this will reset all descriptors back to DMA - */ -static void dma_reset_all_descriptors(int chan_no) -{ - volatile struct rx_desc *rx_desc_p = NULL; - int i; - rx_desc_p = - (struct rx_desc *) g_desc_list + - g_log_chan[chan_no].offset_from_base; - for (i = 0; i < g_log_chan[chan_no].desc_len; i++) { - rx_desc_p->status.word &= - (~(DMA_DESC_SOP_SET | DMA_DESC_EOP_SET | DMA_DESC_CPT_SET)); - rx_desc_p->status.word |= - (DMA_DESC_OWN_DMA | g_log_chan[chan_no].packet_size); - rx_desc_p++; - } -} - -/* Brief: Reset DMA descriptors - */ -static void amazon_dma_reset_tpe_rx(int chan_no) -{ - struct tx_desc *tx_desc_p = NULL; - int j, i = 0; - - // wait until all TX channels stop transmitting - for (j = 9; j <= 10; j++) { - tx_desc_p = - (struct tx_desc *) g_desc_list + - g_log_chan[j].offset_from_base; - for (i = 0; i < g_log_chan[j].desc_len; i++) { - while ((tx_desc_p->status.field.OWN != CPU_OWN)) { - AMAZON_DMA_DMSG("DMA TX in progress\n"); // 000004:fchang - udelay(100); - } - tx_desc_p++; - } - } - - if (tpe_reset) { - total_dma_tpe_reset++; - AMAZON_DMA_DMSG - ("\n===============resetting TPE========================== \n"); - if ((*tpe_reset) ()) { - panic("cannot reset TPE engien\n"); // 000004:fchang - } - } else { - panic("no tpe_reset function\n"); // 000004:fchang - return; - } - dma_reset_all_descriptors(chan_no); - rx_chan_clear_isr(chan_no); - mb(); - - // send EoP - if (tpe_inject) { - if ((*tpe_inject) ()) { - panic("cannot inject a cell\n"); // 000004:fchang - } - } else { - AMAZON_DMA_EMSG("no tpe_inject function\n"); - return; - } - mb(); - while (1) { - if (AMAZON_DMA_REG32 - (AMAZON_DMA_CH0_ISR + - chan_no * AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT)) { - rx_chan_clear_isr(chan_no); - mb(); - dma_reset_all_descriptors(chan_no); - if (g_log_chan[chan_no].current_desc == - (g_log_chan[chan_no].desc_len - 1)) { - g_log_chan[chan_no].current_desc = 0; - } else { - g_log_chan[chan_no].current_desc++; - } - break; - } - mdelay(1); - } - mb(); -#if 0 - AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) &= ~(1 << ch_on_mapping[chan_no]); - while (AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) & - (1 << ch_on_mapping[chan_no])) { - printk("TPE channel still on\n"); - mdelay(1); - } - - // AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = (1<<chan_no); - mb(); - AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + chan_no * AMAZON_DMA_CH_STEP) = - 0x32; - mb(); - rx_chan_clear_isr(chan_no); - dma_reset_all_descriptors(chan_no); - mb(); - AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) |= (1 << ch_on_mapping[chan_no]); - // g_log_chan[chan_no].current_desc=0; - mb(); - mdelay(1); -#endif - if (tpe_start) { - (*tpe_start) (); - } else { - AMAZON_DMA_EMSG("cannot restart TPE engien\n"); - } -} -#endif // AMAZON_DMA_TPE_AAL5_RECOVERY - - -/* Brief: RX channel interrupt handler - * Parameter: RX channel no - * Description: the interrupt handler for each RX channel - * 1. check descriptor, clear ISR if no incoming packet - * 2. inform upper layer to receive packet (and update descriptors) - */ -inline void rx_chan_intr_handler(int chan_no) -{ - volatile struct rx_desc *rx_desc_p = NULL; - - /* fetch the current descriptor */ - rx_desc_p = - (struct rx_desc *) g_desc_list + - g_log_chan[chan_no].offset_from_base + - g_log_chan[chan_no].current_desc; - - g_log_chan[chan_no].dma_dev->current_rx_chan = - chan_no - g_log_chan[chan_no].dma_dev->logic_rx_chan_base; - - // workaround for DMA pitfall: complete bit set happends before the - // other two bits (own,eop) are ready - if ((rx_desc_p->status.field.EoP != 1) - || (rx_desc_p->status.field.OWN != CPU_OWN) - || (rx_desc_p->status.field.data_length == - g_log_chan[chan_no].packet_size)) { -#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY - if (chan_no == 4 || chan_no == 5) { - dma_sync_fails++; - if (dma_sync_fails > MAX_SYNC_FAILS) { - // detect bug - rx_desc_p0 = - (struct rx_desc *) g_desc_list + - g_log_chan[chan_no].offset_from_base; - rx_desc_p1 = - (struct rx_desc *) g_desc_list + - g_log_chan[chan_no].offset_from_base + 1; - if ((rx_desc_p0->status.field.OWN == CPU_OWN - && rx_desc_p0->status.field.EoP != 1) - && (rx_desc_p1->status.field.OWN == CPU_OWN - && rx_desc_p1->status.field.EoP != 1)) { - amazon_dma_reset_tpe_rx(chan_no); - dma_sync_fails = 0; - return; - } - dma_sync_fails = 0; - AMAZON_DMA_DMSG("too many times ch:%d\n", chan_no); // 000004:fchang - return; - } - udelay(10); // 000004:fchang - } -#endif // //AMAZON_DMA_TPE_AAL5_RECOVERY - return; - } - - /* inform the upper layer to receive the packet */ - g_log_chan[chan_no].intr_handler(g_log_chan[chan_no].dma_dev, RCV_INT); - /* check the next descriptor, if still contains the incoming packet, - then do not clear the interrupt status */ - rx_desc_p = - (struct rx_desc *) g_desc_list + - g_log_chan[chan_no].offset_from_base + - g_log_chan[chan_no].current_desc; - if (! - ((rx_desc_p->status.field.OWN == CPU_OWN) - && (rx_desc_p->status.field.C == 1))) { - rx_chan_clear_isr(chan_no); - } -} - - -/* Brief: TX channel interrupt handler - * Parameter: TX channel no - * Description: the interrupt handler for each TX channel - * 1. check all the descripters,if any of them had transmitted a packet, then free buffer - * because we cannot garantee the which one has already transmitted out, we have to go through all the descriptors here - * 2. clear the interrupt status bit - */ -inline void tx_chan_intr_handler(int chan_no) -{ - struct tx_desc *tx_desc_p = NULL; - int i = 0; - - tx_desc_p = - (struct tx_desc *) g_desc_list + - g_log_chan[chan_no].offset_from_base; - - for (i = 0; i < g_log_chan[chan_no].desc_len; i++) { - if ((tx_desc_p->status.field.OWN == CPU_OWN) - && (tx_desc_p->status.field.C == 1)) { - /* if already transmitted, then free the buffer */ - g_log_chan[chan_no]. - buffer_free((u8 *) __va(tx_desc_p->Data_Pointer), - g_log_chan[chan_no].opt[i]); - tx_desc_p->status.field.C = 0; - /* inform the upper layer about the completion of the - transmitted packet, the upper layer may want to free the - packet */ - g_log_chan[chan_no].intr_handler(g_log_chan[chan_no].dma_dev, - TRANSMIT_CPT_INT); - } - tx_desc_p++; - } - - /* after all these operations, clear the interrupt status bit */ - AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + chan_no * AMAZON_DMA_CH_STEP) = - (AMAZON_DMA_REG32 - (AMAZON_DMA_CH0_ISR + - chan_no * - AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP | - DMA_ISR_CMDCPT)); -} - -/* Brief: DMA interrupt handler - */ -static irqreturn_t dma_interrupt(int irq, void *dev_id) -{ - int i = 0; - int chan_no; - u32 isr = 0; -#ifdef NO_TX_INT // 000004:fchang - static int cnt = 0; // 000004:fchang -#endif // 000004:fchang - while ((isr = - AMAZON_DMA_REG32(AMAZON_DMA_COMB_ISR)) & (COMB_ISR_RX_MASK | - COMB_ISR_TX_MASK)) { - if (isr & COMB_ISR_RX_MASK) { - // RX Channels: start WFQ algorithm - chan_no = CHAN_TOTAL_NUM; - for (i = 0; i < RX_CHAN_NUM; i++) { - if ((isr & (comb_isr_mask[i])) - && (g_log_chan[i].weight > 0)) { - if (g_log_chan[chan_no].weight < g_log_chan[i].weight) { - chan_no = i; - } - } - } - if (chan_no < CHAN_TOTAL_NUM) { - rx_chan_intr_handler(chan_no); - } else { - for (i = 0; i < RX_CHAN_NUM; i++) { - g_log_chan[i].weight = g_log_chan[i].default_weight; - } - } - } -#ifdef NO_TX_INT - cnt++; - if (cnt == 10) { - cnt = 0; - for (i = 0; i < tx_chan_list_len; i++) { - if (AMAZON_DMA_REG32 - (AMAZON_DMA_CH0_ISR + - tx_chan_list[i] * - AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP)) { - tx_chan_intr_handler(tx_chan_list[i]); - } - } - } -#else - if (isr & COMB_ISR_TX_MASK) { - // TX channels: RR - for (i = 0; i < tx_chan_list_len; i++) { - if (isr & (comb_isr_mask[tx_chan_list[i]])) { - tx_chan_intr_handler(tx_chan_list[i]); - } - } - } -#endif - } // while - return IRQ_HANDLED; -} - - -/* Brief: read a packet from DMA RX channel - * Parameter: - * Return: packet length - * Description: - * This is called back in a context of DMA interrupt - * 1. prepare new descriptor - * 2. read data - * 3. update WFQ weight - */ -//507261:tc.chen int dma_device_read(struct dma_device_info* dma_dev, u8** dataptr, void** opt) -int asmlinkage dma_device_read(struct dma_device_info *dma_dev, - u8 ** dataptr, void **opt) -{ - u8 *buf; - int len; - int chan_no = 0; - int byte_offset = 0; - - struct rx_desc *rx_desc_p; - void *p = NULL; - int current_desc; - - chan_no = dma_dev->logic_rx_chan_base + dma_dev->current_rx_chan; - current_desc = g_log_chan[chan_no].current_desc; - rx_desc_p = - (struct rx_desc *) (g_desc_list + - g_log_chan[chan_no].offset_from_base + - current_desc); - buf = (u8 *) __va(rx_desc_p->Data_Pointer); /* extract the virtual - address of the data - pointer */ - len = rx_desc_p->status.field.data_length; /* extract the data length */ -#ifndef CONFIG_MIPS_UNCACHED - dma_cache_inv((unsigned long) buf, len); -#endif // CONFIG_MIPS_UNCACHED - *(u32 *) dataptr = (u32) buf; - if (opt) { - *(int *) opt = (int) g_log_chan[chan_no].opt[current_desc]; /* read - out - the - opt - information */ - } - - buf = - (u8 *) g_log_chan[chan_no].buffer_alloc(g_log_chan[chan_no]. - packet_size, &byte_offset, - &p); - // should check null!!!! - if (buf == NULL || p == NULL) { - *(u32 *) dataptr = 0; - *(int *) opt = 0; - len = 0; - } else { - g_log_chan[chan_no].opt[current_desc] = p; - /* reduce the weight for WFQ algorithm */ - g_log_chan[chan_no].weight -= len; - rx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) buf); - } - if (current_desc == g_log_chan[chan_no].desc_len - 1) { - current_desc = 0; - } else { - current_desc++; - } - g_log_chan[chan_no].current_desc = current_desc; - - rx_desc_p->status.word = DMA_DESC_OWN_DMA - | (byte_offset << DMA_DESC_BYTEOFF_SHIFT) - | g_log_chan[chan_no].packet_size; - return len; -} - -/* Brief: write a packet through DMA RX channel to peripheral - * Parameter: - * Return: packet length - * Description: - * - */ -u64 dma_tx_drop = 0; -//507261:tc.chen int dma_device_write(struct dma_device_info* dma_dev, u8* dataptr, int len,void* opt) -int asmlinkage dma_device_write(struct dma_device_info *dma_dev, - u8 * dataptr, int len, void *opt) -{ - int chan_no = 0; - struct tx_desc *tx_desc_p; - - int byte_offset = 0; - int current_desc; - static int cnt = 0; // 000004:fchang - - unsigned long flag; - local_irq_save(flag); - - chan_no = dma_dev->logic_tx_chan_base + dma_dev->current_tx_chan; - current_desc = g_log_chan[chan_no].current_desc; - tx_desc_p = - (struct tx_desc *) (g_desc_list + - g_log_chan[chan_no].offset_from_base + - current_desc); - // 000003:tc.chen if(tx_desc_p->status.field.OWN==DMA_OWN){ - if (tx_desc_p->status.field.OWN == DMA_OWN || tx_desc_p->status.field.C == 1) { // 000003:tc.chen - AMAZON_DMA_DMSG("no TX desc for CPU, drop packet\n"); - dma_tx_drop++; - g_log_chan[chan_no].intr_handler(dma_dev, TX_BUF_FULL_INT); - local_irq_restore(flag); - return 0; - } - g_log_chan[chan_no].opt[current_desc] = opt; - - /* byte offset----to adjust the starting address of the data buffer, - should be multiple of the burst length. */ - byte_offset = - ((u32) CPHYSADDR((u32) dataptr)) % (g_log_chan[chan_no].burst_len * - 4); -#ifndef CONFIG_MIPS_UNCACHED - dma_cache_wback((unsigned long) dataptr, len); - wmb(); -#endif // CONFIG_MIPS_UNCACHED - - tx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) dataptr) - byte_offset; - wmb(); - tx_desc_p->status.word = DMA_DESC_OWN_DMA - | DMA_DESC_SOP_SET - | DMA_DESC_EOP_SET | (byte_offset << DMA_DESC_BYTEOFF_SHIFT) - | len; - wmb(); - if (is_channel_open(chan_no) == 0) { - // turn on if necessary - open_channel(chan_no); - } -#ifdef DMA_NO_POLLING - if ((AMAZON_DMA_REG32 - (AMAZON_DMA_CH0_ISR + - chan_no * AMAZON_DMA_CH_STEP) & (DMA_ISR_DURR | DMA_ISR_CPT)) == - (DMA_ISR_DURR)) { - // clear DURR if (CPT is AND set and DURR is set) - AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + - chan_no * AMAZON_DMA_CH_STEP) = DMA_ISR_DURR; - } -#endif - - if (current_desc == (g_log_chan[chan_no].desc_len - 1)) { - current_desc = 0; - } else { - current_desc++; - } - - - g_log_chan[chan_no].current_desc = current_desc; - tx_desc_p = - (struct tx_desc *) (g_desc_list + - g_log_chan[chan_no].offset_from_base + - current_desc); - // 000003:tc.chen if(tx_desc_p->status.field.OWN==DMA_OWN){ - if (tx_desc_p->status.field.OWN == DMA_OWN || tx_desc_p->status.field.C == 1) { // 000003:tc.chen - g_log_chan[chan_no].intr_handler(dma_dev, TX_BUF_FULL_INT); - } -#ifdef NO_TX_INT -//000004:fchang Start - cnt++; - if (cnt == 5) { - cnt = 0; - tx_chan_intr_handler(chan_no); - } -//000004:fchang End -#endif - local_irq_restore(flag); // 000004:fchang - return len; -} - - - -int desc_list_proc_read(char *buf, char **start, off_t offset, - int count, int *eof, void *data) -{ - int i; - u32 *p = (u32 *) g_desc_list; - int len = 0; - len += sprintf(buf + len, "descriptor list:\n"); - for (i = 0; i < 120; i++) { - len += sprintf(buf + len, "%d\n", i); - len += sprintf(buf + len, "%08x\n", *(p + i * 2 + 1)); - len += sprintf(buf + len, "%08x\n", *(p + i * 2)); - - } - - return len; - -} - -int channel_weight_proc_read(char *buf, char **start, off_t offset, - int count, int *eof, void *data) -{ - - // int i=0; - int len = 0; - len += sprintf(buf + len, "Qos dma channel weight list\n"); - len += - sprintf(buf + len, - "channel_num default_weight current_weight device Tx/Rx\n"); - len += - sprintf(buf + len, - " 0 %08x %08x Switch Rx0\n", - g_log_chan[0].default_weight, g_log_chan[0].weight); - len += - sprintf(buf + len, - " 1 %08x %08x Switch Rx1\n", - g_log_chan[1].default_weight, g_log_chan[1].weight); - len += - sprintf(buf + len, - " 2 %08x %08x Switch Rx2\n", - g_log_chan[2].default_weight, g_log_chan[2].weight); - len += - sprintf(buf + len, - " 3 %08x %08x Switch Rx3\n", - g_log_chan[3].default_weight, g_log_chan[3].weight); - len += - sprintf(buf + len, - " 4 %08x %08x Switch Tx0\n", - g_log_chan[4].default_weight, g_log_chan[4].weight); - len += - sprintf(buf + len, - " 5 %08x %08x Switch Tx1\n", - g_log_chan[5].default_weight, g_log_chan[5].weight); - /* - len+=sprintf(buf+len," 6 %08x %08x TPE - Rx0\n",g_log_chan[6].default_weight, g_log_chan[6].weight); - len+=sprintf(buf+len," 7 %08x %08x TPE - Rx0\n",g_log_chan[7].default_weight, g_log_chan[7].weight); - len+=sprintf(buf+len," 8 %08x %08x TPE - Tx0\n",g_log_chan[8].default_weight, g_log_chan[8].weight); - len+=sprintf(buf+len," 9 %08x %08x TPE - Rx0\n",g_log_chan[9].default_weight, g_log_chan[9].weight); - len+=sprintf(buf+len," 10 %08x %08x DPLUS - Rx0\n",g_log_chan[10].default_weight, g_log_chan[10].weight); - len+=sprintf(buf+len," 11 %08x %08x DPLUS - Rx0\n",g_log_chan[11].default_weight, g_log_chan[11].weight); */ - return len; -} - -int dma_register_proc_read(char *buf, char **start, off_t offset, - int count, int *eof, void *data) -{ - dev_list *temp_dev; - int len = 0;; - - len += sprintf(buf + len, "amazon dma driver\n"); - len += sprintf(buf + len, "version 1.0\n"); - len += sprintf(buf + len, "devices registered:\n"); - for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) { - len += sprintf(buf + len, "%s ", temp_dev->dev->device_name); - } - len += sprintf(buf + len, "\n"); - len += sprintf(buf + len, "CH_ON=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH_ON)); - len += sprintf(buf + len, "CH_RST=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH_RST)); - len += sprintf(buf + len, "CH0_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR)); - len += sprintf(buf + len, "CH1_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH1_ISR)); - len += sprintf(buf + len, "CH2_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH2_ISR)); - len += sprintf(buf + len, "CH3_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH3_ISR)); - len += sprintf(buf + len, "CH4_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH4_ISR)); - len += sprintf(buf + len, "CH5_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH5_ISR)); - len += sprintf(buf + len, "CH6_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH6_ISR)); - len += sprintf(buf + len, "CH7_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH7_ISR)); - len += sprintf(buf + len, "CH8_ISR=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH8_ISR)); - len += - sprintf(buf + len, "CH9_ISR=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH9_ISR)); - len += - sprintf(buf + len, "CH10_ISR=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH10_ISR)); - len += - sprintf(buf + len, "CH11_ISR=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH11_ISR)); - len += - sprintf(buf + len, "LCH0_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK)); - len += - sprintf(buf + len, "LCH1_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH1_MSK)); - len += - sprintf(buf + len, "LCH2_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH2_MSK)); - len += - sprintf(buf + len, "LCH3_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH3_MSK)); - len += - sprintf(buf + len, "LCH4_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH4_MSK)); - len += - sprintf(buf + len, "LCH5_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH5_MSK)); - len += - sprintf(buf + len, "LCH6_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH6_MSK)); - len += - sprintf(buf + len, "LCH7_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH7_MSK)); - len += - sprintf(buf + len, "LCH8_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH8_MSK)); - len += - sprintf(buf + len, "LCH9_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH9_MSK)); - len += - sprintf(buf + len, "LCH10_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH10_MSK)); - len += - sprintf(buf + len, "LCH11_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH11_MSK)); - len += - sprintf(buf + len, "Desc_BA=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_Desc_BA)); - len += - sprintf(buf + len, "LCH0_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH0_DES_LEN)); - len += - sprintf(buf + len, "LCH1_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH1_DES_LEN)); - len += - sprintf(buf + len, "LCH2_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH2_DES_LEN)); - len += - sprintf(buf + len, "LCH3_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH3_DES_LEN)); - len += - sprintf(buf + len, "LCH4_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH4_DES_LEN)); - len += - sprintf(buf + len, "LCH5_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH5_DES_LEN)); - len += - sprintf(buf + len, "LCH6_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH6_DES_LEN)); - len += - sprintf(buf + len, "LCH7_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH7_DES_LEN)); - len += - sprintf(buf + len, "LCH8_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH8_DES_LEN)); - len += - sprintf(buf + len, "LCH9_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH9_DES_LEN)); - len += - sprintf(buf + len, "LCH10_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH10_DES_LEN)); - len += - sprintf(buf + len, "LCH11_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH11_DES_LEN)); - len += - sprintf(buf + len, "LCH1_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH1_DES_OFST)); - len += - sprintf(buf + len, "LCH2_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH2_DES_OFST)); - len += - sprintf(buf + len, "LCH3_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH3_DES_OFST)); - len += - sprintf(buf + len, "LCH4_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH4_DES_OFST)); - len += - sprintf(buf + len, "LCH5_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH5_DES_OFST)); - len += - sprintf(buf + len, "LCH6_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH6_DES_OFST)); - len += - sprintf(buf + len, "LCH7_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH7_DES_OFST)); - len += - sprintf(buf + len, "LCH8_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH8_DES_OFST)); - len += - sprintf(buf + len, "LCH9_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH9_DES_OFST)); - len += - sprintf(buf + len, "LCH10_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH10_DES_OFST)); - len += - sprintf(buf + len, "LCH11_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH11_DES_OFST)); - len += - sprintf(buf + len, "AMAZON_DMA_SW_BL=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_SW_BL)); - len += - sprintf(buf + len, "AMAZON_DMA_TPE_BL=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_TPE_BL)); - len += - sprintf(buf + len, "DPlus2FPI_BL=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_DPlus2FPI_BL)); - len += - sprintf(buf + len, "GRX_BUF_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_GRX_BUF_LEN)); - len += - sprintf(buf + len, "DMA_ECON_REG=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_DMA_ECON_REG)); - len += - sprintf(buf + len, "POLLING_REG=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_POLLING_REG)); - len += - sprintf(buf + len, "CH_WGT=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH_WGT)); - len += - sprintf(buf + len, "TX_WGT=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_TX_WGT)); - len += - sprintf(buf + len, "DPlus2FPI_CLASS=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_DPLus2FPI_CLASS)); - len += - sprintf(buf + len, "COMB_ISR=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_COMB_ISR)); -#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY - len += sprintf(buf + len, "TPE fails:%u\n", total_dma_tpe_reset); // 000004:fchang -#endif - return len; -} - -/* Brief: initialize DMA registers - * Description: - */ -static void dma_chip_init(void) -{ - int i; - for (i = 0; i < CHAN_TOTAL_NUM; i++) { - AMAZON_DMA_REG32(AMAZON_DMA_CH1_DES_OFST + - i * AMAZON_DMA_CH_STEP) = DEFAULT_OFFSET; - } -#ifdef DMA_NO_POLLING - AMAZON_DMA_REG32(AMAZON_DMA_POLLING_REG) = 0; -#else - // enable poll mode and set polling counter - AMAZON_DMA_REG32(AMAZON_DMA_POLLING_REG) = DMA_POLLING_CNT | DMA_POLLING_ENABLE; -#endif - // to enable DMA drop - AMAZON_DMA_REG32(AMAZON_DMA_GRX_BUF_LEN) = 0x10000; -} - -int insert_dev_list(dev_list * dev) -{ - dev_list *temp_dev; - if (g_head_dev == NULL) { - g_head_dev = dev; - g_tail_dev = dev; - dev->prev = NULL; - dev->next = NULL; - } else { - for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) { - if (temp_dev->weight < dev->weight) { - if (temp_dev->prev) - temp_dev->prev->next = dev; - - dev->prev = temp_dev->prev; - dev->next = temp_dev; - temp_dev->prev = dev; - if (temp_dev == g_head_dev) - g_head_dev = dev; - break; - } - } - - if (!temp_dev) { - g_tail_dev->next = dev; - dev->prev = g_tail_dev; - dev->next = NULL; - g_tail_dev = dev; - } - - } - - return 1; -} - -u8 *common_buffer_alloc(int len, int *byte_offset, void **opt) -{ - u8 *buffer = (u8 *) kmalloc(len * sizeof(u8), GFP_KERNEL); - *byte_offset = 0; - return buffer; - -} - -int common_buffer_free(u8 * dataptr, void *opt) -{ - if (dataptr) - kfree(dataptr); - return 0; -} - - -int register_dev(struct dma_device_info *dma_dev) -{ - int i, j, temp; - int burst_reg = 0; - u8 *buffer; - void *p = NULL; - int byte_offset = 0; - - struct rx_desc *rx_desc_p; - struct tx_desc *tx_desc_p; - if (strcmp(dma_dev->device_name, "switch1") == 0) { - AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = SWITCH1_RST_MASK; // resest - // channel - // 1st - AMAZON_DMA_REG32(AMAZON_DMA_DMA_ECON_REG) |= 0x3; // endian - // conversion - // for Switch - burst_reg = AMAZON_DMA_SW_BL; - dma_dev->logic_rx_chan_base = switch_rx_chan_base; - dma_dev->logic_tx_chan_base = switch_tx_chan_base; - } - - else if (strcmp(dma_dev->device_name, "switch2") == 0) { - AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = SWITCH2_RST_MASK; // resest - // channel - // 1st - AMAZON_DMA_REG32(AMAZON_DMA_DMA_ECON_REG) |= 0x3; // endian - // conversion - // for Switch - burst_reg = AMAZON_DMA_SW_BL; - dma_dev->logic_rx_chan_base = switch2_rx_chan_base; - dma_dev->logic_tx_chan_base = switch2_tx_chan_base; - - } else if (strcmp(dma_dev->device_name, "TPE") == 0) { - AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = TPE_RST_MASK; // resest - // channel 1st - // - burst_reg = AMAZON_DMA_TPE_BL; - dma_dev->logic_rx_chan_base = TPE_rx_chan_base; - dma_dev->logic_tx_chan_base = TPE_tx_chan_base; - } - - else if (strcmp(dma_dev->device_name, "DPlus") == 0) { - AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = DPlus2FPI_RST_MASK; // resest - // channel - // 1st - dma_dev->logic_rx_chan_base = DPLus2FPI_rx_chan_base; - dma_dev->logic_tx_chan_base = DPLus2FPI_tx_chan_base; - - } - - i = 0; - for (temp = dma_dev->tx_burst_len; temp > 2; temp /= 2) { - i += 1; - } - - - AMAZON_DMA_REG32(burst_reg) = i << 1; - i = 0; - for (temp = dma_dev->rx_burst_len; temp > 2; temp /= 2) { - i += 1; - } - AMAZON_DMA_REG32(burst_reg) += i; - - for (i = 0; i < dma_dev->num_rx_chan; i++) { - - temp = dma_dev->logic_rx_chan_base + i; - g_log_chan[temp].dma_dev = dma_dev; - g_log_chan[temp].weight = dma_dev->rx_chan[i].weight; - g_log_chan[temp].default_weight = dma_dev->rx_chan[i].weight; - g_log_chan[temp].current_desc = 0; - g_log_chan[temp].desc_ofst = DEFAULT_OFFSET; - g_log_chan[temp].desc_len = dma_dev->rx_chan[i].desc_num; - g_log_chan[temp].offset_from_base = temp * DEFAULT_OFFSET; - g_log_chan[temp].packet_size = dma_dev->rx_chan[i].packet_size; - - AMAZON_DMA_REG32(AMAZON_DMA_CH0_DES_LEN + temp * AMAZON_DMA_CH_STEP) = dma_dev->rx_chan[i].desc_num; - // enable interrupt mask - if (temp == 4 || temp == 5) { - AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x32; - } else { - AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x36; - } - strcpy(g_log_chan[temp].device_name, dma_dev->device_name); - g_log_chan[temp].burst_len = dma_dev->rx_burst_len; - g_log_chan[temp].control = dma_dev->rx_chan[i].control; - - - /* specify the buffer allocation and free method */ - if (dma_dev->buffer_alloc) - g_log_chan[temp].buffer_alloc = dma_dev->buffer_alloc; - else - g_log_chan[temp].buffer_alloc = common_buffer_alloc; - - if (dma_dev->buffer_free) - g_log_chan[temp].buffer_free = dma_dev->buffer_free; - else - g_log_chan[temp].buffer_free = common_buffer_free; - - if (dma_dev->intr_handler) - g_log_chan[temp].intr_handler = dma_dev->intr_handler; - else - g_log_chan[temp].intr_handler = NULL; - - for (j = 0; j < g_log_chan[temp].desc_len; j++) { - rx_desc_p = (struct rx_desc *) (g_desc_list + g_log_chan[temp].offset_from_base + j); - rx_desc_p->status.word = 0; - rx_desc_p->status.field.data_length = g_log_chan[temp].packet_size; - buffer = (u8 *) g_log_chan[temp].buffer_alloc(g_log_chan[temp].packet_size, &byte_offset, &p); - rx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) buffer); - rx_desc_p->status.field.byte_offset = byte_offset; - /* fix me, should check if the addresss comply with the burst - lenght requirment */ - g_log_chan[temp].opt[j] = p; - rx_desc_p->status.field.OWN = DMA_OWN; - - } - /* open or close the channel */ - if (g_log_chan[temp].control) - open_channel(temp); - else - close_channel(temp); - } - - for (i = 0; i < dma_dev->num_tx_chan; i++) { - temp = dma_dev->logic_tx_chan_base + i; - g_log_chan[temp].dma_dev = dma_dev; - g_log_chan[temp].weight = dma_dev->tx_chan[i].weight; - g_log_chan[temp].default_weight = dma_dev->tx_chan[i].weight; - g_log_chan[temp].current_desc = 0; - g_log_chan[temp].desc_ofst = DEFAULT_OFFSET; - g_log_chan[temp].desc_len = dma_dev->tx_chan[i].desc_num; - g_log_chan[temp].offset_from_base = temp * DEFAULT_OFFSET; - g_log_chan[temp].packet_size = dma_dev->tx_chan[i].packet_size; - - AMAZON_DMA_REG32(AMAZON_DMA_CH0_DES_LEN + temp * AMAZON_DMA_CH_STEP) = dma_dev->tx_chan[i].desc_num; - // enable interrupt mask -#ifdef NO_TX_INT - AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x3e; -#else - AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x36; -#endif - - strcpy(g_log_chan[temp].device_name, dma_dev->device_name); - g_log_chan[temp].burst_len = dma_dev->tx_burst_len; - g_log_chan[temp].control = dma_dev->tx_chan[i].control; - - if (dma_dev->buffer_alloc) - g_log_chan[temp].buffer_alloc = dma_dev->buffer_alloc; - else - g_log_chan[temp].buffer_alloc = common_buffer_alloc; - - if (dma_dev->buffer_free) - g_log_chan[temp].buffer_free = dma_dev->buffer_free; - else - g_log_chan[temp].buffer_free = common_buffer_free; - - if (dma_dev->intr_handler) - g_log_chan[temp].intr_handler = dma_dev->intr_handler; - else - g_log_chan[temp].intr_handler = NULL; - - for (j = 0; j < g_log_chan[temp].desc_len; j++) { - - tx_desc_p = - (struct tx_desc *) (g_desc_list + - g_log_chan[temp].offset_from_base + j); - tx_desc_p->status.word = 0; - tx_desc_p->status.field.data_length = - g_log_chan[temp].packet_size; - tx_desc_p->status.field.OWN = CPU_OWN; - - } - /* workaround DMA pitfall, we never turn on channel if we don't - have proper descriptors */ - if (!g_log_chan[temp].control) { - close_channel(temp); - } - - } - - return 0; -} - -int dma_device_register(struct dma_device_info *dma_dev) -{ - dev_list *temp_dev; - temp_dev = (dev_list *) kmalloc(sizeof(dev_list), GFP_KERNEL); - temp_dev->dev = dma_dev; - temp_dev->weight = dma_dev->weight; - insert_dev_list(temp_dev); - /* check whether this is a known device */ - if ((strcmp(dma_dev->device_name, "switch1") == 0) - || (strcmp(dma_dev->device_name, "TPE") == 0) - || (strcmp(dma_dev->device_name, "switch2") == 0) - || (strcmp(dma_dev->device_name, "DPlus") == 0)) { - register_dev(dma_dev); - } - - return 0; -} - - -int unregister_dev(struct dma_device_info *dma_dev) -{ - int i, j, temp; - u8 *buffer; - struct rx_desc *rx_desc_p; - - for (i = 0; i < dma_dev->num_rx_chan; i++) { - temp = dma_dev->logic_rx_chan_base + i; - close_channel(temp); - for (j = 0; j < g_log_chan[temp].desc_len; j++) { - rx_desc_p = - (struct rx_desc *) (g_desc_list + - g_log_chan[temp].offset_from_base + j); - buffer = (u8 *) __va(rx_desc_p->Data_Pointer); - g_log_chan[temp].buffer_free(buffer, g_log_chan[temp].opt[j]); - } - } - for (i = 0; i < dma_dev->num_tx_chan; i++) { - temp = dma_dev->logic_tx_chan_base + i; - close_channel(temp); - } - return 0; -} - -int dma_device_unregister(struct dma_device_info *dev) -{ - dev_list *temp_dev; - for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) { - if (strcmp(dev->device_name, temp_dev->dev->device_name) == 0) { - if ((strcmp(dev->device_name, "switch1") == 0) - || (strcmp(dev->device_name, "TPE") == 0) - || (strcmp(dev->device_name, "switch2") == 0) - || (strcmp(dev->device_name, "DPlus") == 0)) - unregister_dev(dev); - if (temp_dev == g_head_dev) { - g_head_dev = temp_dev->next; - kfree(temp_dev); - } else { - if (temp_dev == g_tail_dev) - g_tail_dev = temp_dev->prev; - if (temp_dev->prev) - temp_dev->prev->next = temp_dev->next; - if (temp_dev->next) - temp_dev->next->prev = temp_dev->prev; - kfree(temp_dev); - } - break; - } - - } - return 0; -} - -void dma_device_update_rx(struct dma_device_info *dma_dev) -{ - int i, temp; - for (i = 0; i < dma_dev->num_rx_chan; i++) { - temp = dma_dev->logic_rx_chan_base + i; - g_log_chan[temp].control = dma_dev->rx_chan[i].control; - - if (g_log_chan[temp].control) - open_channel(temp); - else - close_channel(temp); - } - -} - -void dma_device_update_tx(struct dma_device_info *dma_dev) -{ - int i, temp; - for (i = 0; i < dma_dev->num_tx_chan; i++) { - temp = dma_dev->logic_tx_chan_base + i; - g_log_chan[temp].control = dma_dev->tx_chan[i].control; - if (g_log_chan[temp].control) { - /* we turn on channel when send out the very first packet */ - // open_channel(temp); - } else - close_channel(temp); - } -} - -int dma_device_update(struct dma_device_info *dma_dev) -{ - dma_device_update_rx(dma_dev); - dma_device_update_tx(dma_dev); - return 0; -} - -static int dma_open(struct inode *inode, struct file *file) -{ - return 0; -} - -static int dma_release(struct inode *inode, struct file *file) -{ - /* release the resources */ - return 0; -} - -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36)) -static long dma_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -#else -static int dma_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) -#endif -{ - int value = 0; - int chan_no = 0; - - switch (cmd) { - case 0: /* get register value */ - break; - case 1: /* return channel weight */ - chan_no = *((int *) arg); - *((int *) arg + 1) = g_log_chan[chan_no].default_weight; - break; - case 2: /* set channel weight */ - chan_no = *((int *) arg); - value = *((int *) arg + 1); - printk("new weight=%08x\n", value); - g_log_chan[chan_no].default_weight = value; - break; - default: - break; - } - return 0; -} - - -static struct file_operations dma_fops = { - owner:THIS_MODULE, - open:dma_open, - release:dma_release, -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36)) - unlocked_ioctl:dma_ioctl, -#else - ioctl:dma_ioctl, -#endif -}; - -static int dma_init(void) -{ - int result = 0; - int i; - printk("initialising dma core\n"); - result = register_chrdev(DMA_MAJOR, "dma-core", &dma_fops); - if (result) { - AMAZON_DMA_EMSG("cannot register device dma-core!\n"); - return result; - } - result = request_irq(AMAZON_DMA_INT, dma_interrupt, IRQF_DISABLED, "dma-core", (void *) &dma_interrupt); - if (result) { - AMAZON_DMA_EMSG("error, cannot get dma_irq!\n"); - free_irq(AMAZON_DMA_INT, (void *) &dma_interrupt); - return -EFAULT; - } - - g_desc_list = (u64 *) KSEG1ADDR(__get_free_page(GFP_DMA)); - - if (g_desc_list == NULL) { - AMAZON_DMA_EMSG("no memory for desriptor\n"); - return -ENOMEM; - } - memset(g_desc_list, 0, PAGE_SIZE); - AMAZON_DMA_REG32(AMAZON_DMA_Desc_BA) = (u32) CPHYSADDR((u32) g_desc_list); - g_amazon_dma_dir = proc_mkdir("amazon_dma", NULL); - create_proc_read_entry("dma_register", 0, g_amazon_dma_dir, dma_register_proc_read, NULL); - create_proc_read_entry("g_desc_list", 0, g_amazon_dma_dir, desc_list_proc_read, NULL); - create_proc_read_entry("channel_weight", 0, g_amazon_dma_dir, channel_weight_proc_read, NULL); - - dma_chip_init(); - for (i = 0; i < (RX_CHAN_NUM + 1); i++) { - rx_chan_list[i] = -1; - } - for (i = 0; i < (TX_CHAN_NUM + 1); i++) { - tx_chan_list[i] = -1; - } - - for (i = 0; i < CHAN_TOTAL_NUM; i++) { - comb_isr_mask[i] = 0x80000000 >> (i); - } - - g_log_chan[CHAN_TOTAL_NUM].weight = 0; - printk("initialising dma core ... done\n"); - - return 0; -} - -arch_initcall(dma_init); - - -void dma_cleanup(void) -{ - dev_list *temp_dev; - - unregister_chrdev(DMA_MAJOR, "dma-core"); - for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) { - kfree(temp_dev); - } - free_page(KSEG0ADDR((unsigned long) g_desc_list)); - remove_proc_entry("channel_weight", g_amazon_dma_dir); - remove_proc_entry("dma_list", g_amazon_dma_dir); - remove_proc_entry("dma_register", g_amazon_dma_dir); - remove_proc_entry("amazon_dma", NULL); - /* release the resources */ - free_irq(AMAZON_DMA_INT, (void *) &dma_interrupt); -} - -EXPORT_SYMBOL(dma_device_register); -EXPORT_SYMBOL(dma_device_unregister); -EXPORT_SYMBOL(dma_device_read); -EXPORT_SYMBOL(dma_device_write); -EXPORT_SYMBOL(dma_device_update); -EXPORT_SYMBOL(dma_device_update_rx); - -MODULE_LICENSE("GPL"); diff --git a/target/linux/amazon/files/arch/mips/amazon/dma-core.h b/target/linux/amazon/files/arch/mips/amazon/dma-core.h deleted file mode 100644 index cb3d456c95..0000000000 --- a/target/linux/amazon/files/arch/mips/amazon/dma-core.h +++ /dev/null @@ -1,69 +0,0 @@ -#ifndef DMA_CORE_H -#define DMA_CORE_H - -#define AMAZON_DMA_REG32(reg_num) *((volatile u32*)(reg_num)) -#define AMAZON_DMA_CH_STEP 4 - -#define COMB_ISR_RX_MASK 0xfe000000 -#define COMB_ISR_TX_MASK 0x01f00000 - - -#define DMA_OWN 1 -#define CPU_OWN 0 -#define DMA_MAJOR 250 - -//Descriptors -#define DMA_DESC_OWN_CPU 0x0 -#define DMA_DESC_OWN_DMA 0x80000000 -#define DMA_DESC_CPT_SET 0x40000000 -#define DMA_DESC_SOP_SET 0x20000000 -#define DMA_DESC_EOP_SET 0x10000000 - -#define switch_rx_chan_base 0 -#define switch_tx_chan_base 7 -#define switch2_rx_chan_base 2 -#define switch2_tx_chan_base 8 -#define TPE_rx_chan_base 4 -#define TPE_tx_chan_base 9 -#define DPLus2FPI_rx_chan_base 6 -#define DPLus2FPI_tx_chan_base 11 - -#define RX_CHAN_NUM 7 -#define TX_CHAN_NUM 5 -#define CHAN_TOTAL_NUM (RX_CHAN_NUM+TX_CHAN_NUM) -#define DEFAULT_OFFSET 20 -#define DESCRIPTOR_SIZE 8 - -typedef struct dev_list{ - struct dma_device_info* dev; - int weight; - struct dev_list* prev; - struct dev_list* next; -}dev_list; - -typedef struct channel_info{ - char device_name[16]; - int occupied; - enum attr_t attr; - int current_desc; - int weight; - int default_weight; - int desc_num; - int burst_len; - int desc_len; - int desc_ofst; - int packet_size; - int offset_from_base; - int control; - void* opt[DEFAULT_OFFSET]; - u8* (*buffer_alloc)(int len,int* offset, void** opt); - int (*buffer_free)(u8* dataptr,void* opt); - int (*intr_handler)(struct dma_device_info* info,int status); - - struct dma_device_info* dma_dev; -}channel_info; - - - -#endif - diff --git a/target/linux/amazon/files/arch/mips/amazon/interrupt.c b/target/linux/amazon/files/arch/mips/amazon/interrupt.c deleted file mode 100644 index 05ff1ee75a..0000000000 --- a/target/linux/amazon/files/arch/mips/amazon/interrupt.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Gary Jennejohn (C) 2003 <gj@denx.de> - * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Routines for generic manipulation of the interrupts found on the - * AMAZON boards. - */ - -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/kernel_stat.h> -#include <linux/module.h> - -#include <asm/amazon/amazon.h> -#include <asm/amazon/irq.h> -#include <asm/bootinfo.h> -#include <asm/irq_cpu.h> -#include <asm/irq.h> -#include <asm/time.h> - -static void amazon_disable_irq(struct irq_data *d) -{ - int i; - u32 amazon_ier = AMAZON_ICU_IM0_IER; - unsigned int irq_nr = d->irq; - - if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0) - amazon_writel(amazon_readl(amazon_ier) & (~(AMAZON_DMA_H_MASK)), amazon_ier); - else { - irq_nr -= INT_NUM_IRQ0; - for (i = 0; i <= 4; i++) - { - if (irq_nr <= 31) - amazon_writel(amazon_readl(amazon_ier) & ~(1 << irq_nr ), amazon_ier); - amazon_ier += 0x10; - irq_nr -= 32; - } - } -} - -static void amazon_mask_and_ack_irq(struct irq_data *d) -{ - int i; - u32 amazon_ier = AMAZON_ICU_IM0_IER; - u32 amazon_isr = AMAZON_ICU_IM0_ISR; - unsigned int irq_nr = d->irq; - - if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0){ - amazon_writel(amazon_readl(amazon_ier) & (~(AMAZON_DMA_H_MASK)), amazon_ier); - amazon_writel(AMAZON_DMA_H_MASK, amazon_isr); - } else { - irq_nr -= INT_NUM_IRQ0; - for (i = 0; i <= 4; i++) - { - if (irq_nr <= 31){ - amazon_writel(amazon_readl(amazon_ier) & ~(1 << irq_nr ), amazon_ier); - amazon_writel((1 << irq_nr ), amazon_isr); - } - amazon_ier += 0x10; - amazon_isr += 0x10; - irq_nr -= 32; - } - } -} - -static void amazon_enable_irq(struct irq_data *d) -{ - int i; - u32 amazon_ier = AMAZON_ICU_IM0_IER; - unsigned int irq_nr = d->irq; - - if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0) - amazon_writel(amazon_readl(amazon_ier) | AMAZON_DMA_H_MASK, amazon_ier); - else { - irq_nr -= INT_NUM_IRQ0; - for (i = 0; i <= 4; i++) - { - if (irq_nr <= 31) - amazon_writel(amazon_readl(amazon_ier) | (1 << irq_nr ), amazon_ier); - amazon_ier += 0x10; - irq_nr -= 32; - } - } -} - -static unsigned int amazon_startup_irq(struct irq_data *d) -{ - amazon_enable_irq(d); - return 0; -} - -static struct irq_chip amazon_irq_type = { - .name = "AMAZON", - .irq_startup = amazon_startup_irq, - .irq_enable = amazon_enable_irq, - .irq_disable = amazon_disable_irq, - .irq_unmask = amazon_enable_irq, - .irq_ack = amazon_mask_and_ack_irq, - .irq_mask = amazon_disable_irq, - .irq_mask_ack = amazon_mask_and_ack_irq, -}; - -/* Cascaded interrupts from IM0-4 */ -static inline void amazon_hw_irqdispatch(u8 line) -{ - u32 irq; - - irq = (amazon_readl(AMAZON_ICU_IM_VEC) >> (line * 5)) & AMAZON_ICU_IM0_VEC_MASK; - if (line == 0 && irq <= 11 && irq >= 0) { - //DMA fixed to IM0_IRL0 - irq = 0; - } - do_IRQ(irq + INT_NUM_IRQ0 + (line * 32)); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; - if (pending & CAUSEF_IP7){ - do_IRQ(MIPS_CPU_TIMER_IRQ); - goto out; - } else { - unsigned int i; - for (i = 0; i <= 4; i++) - { - if(pending & (CAUSEF_IP2 << i)){ - amazon_hw_irqdispatch(i); - goto out; - } - } - } - printk("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status()); -out: - return; -} - -static struct irqaction cascade = { - .handler = no_action, - .flags = IRQF_DISABLED, - .name = "cascade", -}; - -void __init arch_init_irq(void) -{ - int i; - - /* mask all interrupt sources */ - for(i = 0; i <= 4; i++){ - amazon_writel(0, AMAZON_ICU_IM0_IER + (i * 0x10)); - } - - mips_cpu_irq_init(); - - /* set up irq cascade */ - for (i = 2; i <= 6; i++) { - setup_irq(i, &cascade); - } - - for (i = INT_NUM_IRQ0; i <= INT_NUM_IM4_IRL31; i++) - irq_set_chip_and_handler(i, &amazon_irq_type, - handle_level_irq); - - set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5); -} - -void __cpuinit arch_fixup_c0_irqs(void) -{ - /* FIXME: check for CPUID and only do fix for specific chips/versions */ - cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ; - cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ; -} diff --git a/target/linux/amazon/files/arch/mips/amazon/pci.c b/target/linux/amazon/files/arch/mips/amazon/pci.c deleted file mode 100644 index 1b2afb9d4f..0000000000 --- a/target/linux/amazon/files/arch/mips/amazon/pci.c +++ /dev/null @@ -1,279 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. - * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ - -/* FIXME: convert nasty volatile register derefs to readl/writel calls */ - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <asm/io.h> -#include <asm/paccess.h> -#include <asm/amazon/irq.h> -#include <asm/amazon/amazon.h> - -#define AMAZON_PCI_REG32( addr ) (*(volatile u32 *)(addr)) -#ifndef AMAZON_PCI_MEM_BASE -#define AMAZON_PCI_MEM_BASE 0xb2000000 -#endif -#define AMAZON_PCI_MEM_SIZE 0x00400000 -#define AMAZON_PCI_IO_BASE 0xb2400000 -#define AMAZON_PCI_IO_SIZE 0x00200000 - -#define AMAZON_PCI_CFG_BUSNUM_SHF 16 -#define AMAZON_PCI_CFG_DEVNUM_SHF 11 -#define AMAZON_PCI_CFG_FUNNUM_SHF 8 - -#define PCI_ACCESS_READ 0 -#define PCI_ACCESS_WRITE 1 - -static struct resource pci_io_resource = { - .name = "io pci IO space", -#if 1 - .start = AMAZON_PCI_IO_BASE, - .end = AMAZON_PCI_IO_BASE + AMAZON_PCI_IO_SIZE - 1, -#else - .start = 0, - .end = 0x00002000 - 1, -#endif - .flags = IORESOURCE_IO -}; - -static struct resource pci_mem_resource = { - .name = "ext pci memory space", - .start = AMAZON_PCI_MEM_BASE, - .end = AMAZON_PCI_MEM_BASE + AMAZON_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -static int amazon_pci_config_access(unsigned char access_type, - struct pci_bus *bus, unsigned int devfn, unsigned int where, u32 *data) -{ - unsigned long flags; - u32 pci_addr; - u32 val; - int ret; - - /* Amazon support slot from 0 to 15 */ - /* devfn 0 & 0x20 is itself */ - if ((bus->number != 0) || (devfn > 0x7f) || (devfn == 0) || (devfn == 0x20)) - return 1; - - local_irq_save(flags); - - pci_addr = AMAZON_PCI_CFG_BASE | - bus->number << AMAZON_PCI_CFG_BUSNUM_SHF | - devfn << AMAZON_PCI_CFG_FUNNUM_SHF | - (where & ~0x3); - - if (access_type == PCI_ACCESS_WRITE) - { -#ifdef CONFIG_SWAP_IO_SPACE - val = swab32(*data); -#endif - ret = put_dbe(val, (u32 *)pci_addr); - } else { - ret = get_dbe(val, (u32 *)pci_addr); -#ifdef CONFIG_SWAP_IO_SPACE - *data = swab32(val); -#else - *data = val; -#endif - } - - amazon_writel(amazon_readl(PCI_MODE) & (~(1<<PCI_MODE_cfgok_bit)), PCI_MODE); - amazon_writel(amazon_readl(STATUS_COMMAND_ADDR), STATUS_COMMAND_ADDR); - amazon_writel(amazon_readl(PCI_MODE) | (~(1<<PCI_MODE_cfgok_bit)), PCI_MODE); - mb(); - local_irq_restore(flags); - - if (((*data) == 0xffffffff) && (access_type == PCI_ACCESS_READ)) - return 1; - - return ret; -} - - -static int amazon_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val) -{ - u32 data = 0; - - if (amazon_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) - return PCIBIOS_DEVICE_NOT_FOUND; - - if (size == 1) - *val = (data >> ((where & 3) << 3)) & 0xff; - else if (size == 2) - *val = (data >> ((where & 3) << 3)) & 0xffff; - else - *val = data; - - return PCIBIOS_SUCCESSFUL; -} - - -static int amazon_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) -{ - u32 data = 0; - - if (size == 4) - { - data = val; - } else { - if (amazon_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) - return PCIBIOS_DEVICE_NOT_FOUND; - - if (size == 1) - data = (data & ~(0xff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - else if (size == 2) - data = (data & ~(0xffff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - } - - if (amazon_pci_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) - return PCIBIOS_DEVICE_NOT_FOUND; - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops amazon_pci_ops = { - amazon_pci_read, - amazon_pci_write -}; - -static struct pci_controller amazon_pci_controller = { - .pci_ops = &amazon_pci_ops, - .mem_resource = &pci_mem_resource, - .mem_offset = 0x00000000UL, - .io_resource = &pci_io_resource, - .io_offset = 0x00000000UL, -}; - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - switch (slot) { - case 13: - /* IDSEL = AD29 --> USB Host Controller */ - return INT_NUM_IM2_IRL15; - case 14: - /* IDSEL = AD30 --> mini PCI connector */ - return INT_NUM_IM2_IRL14; - default: - printk("Warning: no IRQ found for PCI device in slot %d, pin %d\n", slot, pin); - return 0; - } -} - -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - switch(dev->irq) { - case INT_NUM_IM2_IRL15: - /* - * IDSEL = AD29 --> USB Host Controller - * PCI_INTA/B/C--GPIO Port0.2--EXIN3 - * IN/ALT0:1 ALT1:0 - * PULL UP - */ - (*AMAZON_GPIO_P0_DIR) = (*AMAZON_GPIO_P0_DIR) & 0xfffffffb; - (*AMAZON_GPIO_P0_ALTSEL0) = (*AMAZON_GPIO_P0_ALTSEL0)| 4; - (*AMAZON_GPIO_P0_ALTSEL1) = (*AMAZON_GPIO_P0_ALTSEL1)& 0xfffffffb; - (*AMAZON_GPIO_P0_PUDSEL) = (*AMAZON_GPIO_P0_PUDSEL) | 4; - (*AMAZON_GPIO_P0_PUDEN) = (*AMAZON_GPIO_P0_PUDEN) | 4; - //External Interrupt Node - (*AMAZON_ICU_EXTINTCR) = (*AMAZON_ICU_EXTINTCR)|0x6000; /* Low Level triggered */ - (*AMAZON_ICU_IRNEN) = (*AMAZON_ICU_IRNEN)|0x8; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - break; - case INT_NUM_IM2_IRL14: - /* - * IDSEL = AD30 --> mini PCI connector - * PCI_INTA--GPIO Port0.1--EXIN2 - * IN/ALT0:1 ALT1:0 - * PULL UP - */ - (*AMAZON_GPIO_P0_DIR) = (*AMAZON_GPIO_P0_DIR) & 0xfffffffd; - (*AMAZON_GPIO_P0_ALTSEL0) = (*AMAZON_GPIO_P0_ALTSEL0)| 2; - (*AMAZON_GPIO_P0_ALTSEL1) = (*AMAZON_GPIO_P0_ALTSEL1)& 0xfffffffd; - (*AMAZON_GPIO_P0_PUDSEL) = (*AMAZON_GPIO_P0_PUDSEL) | 2; - (*AMAZON_GPIO_P0_PUDEN) = (*AMAZON_GPIO_P0_PUDEN) | 2; - //External Interrupt Node - (*AMAZON_ICU_EXTINTCR) = (*AMAZON_ICU_EXTINTCR)|0x600; - (*AMAZON_ICU_IRNEN) = (*AMAZON_ICU_IRNEN)|0x4; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - break; - default: - return 1; - } - return 0; -} - -int __init amazon_pci_init(void) -{ - u32 temp_buffer; - -#ifdef CONFIG_SWAP_IO_SPACE - AMAZON_PCI_REG32(IRM) = AMAZON_PCI_REG32(IRM) | (1<<27) | (1<<28); - wmb(); -#endif - - AMAZON_PCI_REG32(CLOCK_CONTROL) = AMAZON_PCI_REG32(CLOCK_CONTROL) | (1<<ARB_CTRL_bit); - amazon_writel(amazon_readl(PCI_MODE) & (~(1<<PCI_MODE_cfgok_bit)), PCI_MODE); - - AMAZON_PCI_REG32(STATUS_COMMAND_ADDR) = AMAZON_PCI_REG32(STATUS_COMMAND_ADDR) | (1<<BUS_MASTER_ENABLE_BIT) |(1<<MEM_SPACE_ENABLE_BIT); - - temp_buffer = AMAZON_PCI_REG32(PCI_ARB_CTRL_STATUS_ADDR); - temp_buffer = temp_buffer | (1<< INTERNAL_ARB_ENABLE_BIT); - temp_buffer = temp_buffer & ~(3<< PCI_MASTER0_REQ_MASK_2BITS); - temp_buffer = temp_buffer & ~(3<< PCI_MASTER0_GNT_MASK_2BITS); - - /* flash */ - temp_buffer = temp_buffer & ~(3<< PCI_MASTER1_REQ_MASK_2BITS); - temp_buffer = temp_buffer & ~(3<< PCI_MASTER1_GNT_MASK_2BITS); - - /* external master */ - temp_buffer = temp_buffer & ~(3<< PCI_MASTER2_REQ_MASK_2BITS); - temp_buffer = temp_buffer & ~(3<< PCI_MASTER2_GNT_MASK_2BITS); - - AMAZON_PCI_REG32(PCI_ARB_CTRL_STATUS_ADDR) = temp_buffer; - wmb(); - - AMAZON_PCI_REG32(FPI_ADDRESS_MAP_0) = 0xb2000000; - AMAZON_PCI_REG32(FPI_ADDRESS_MAP_1) = 0xb2100000; - AMAZON_PCI_REG32(FPI_ADDRESS_MAP_2) = 0xb2200000; - AMAZON_PCI_REG32(FPI_ADDRESS_MAP_3) = 0xb2300000; - AMAZON_PCI_REG32(FPI_ADDRESS_MAP_4) = 0xb2400000; - AMAZON_PCI_REG32(FPI_ADDRESS_MAP_5) = 0xb2500000; - AMAZON_PCI_REG32(FPI_ADDRESS_MAP_6) = 0xb2600000; - AMAZON_PCI_REG32(FPI_ADDRESS_MAP_7) = 0xb2700000; - - AMAZON_PCI_REG32(BAR11_MASK) = 0x0c000008; - AMAZON_PCI_REG32(PCI_ADDRESS_MAP_11) = 0x0; - AMAZON_PCI_REG32(BAR1_ADDR) = 0x0; - amazon_writel(amazon_readl(PCI_MODE) | (~(1<<PCI_MODE_cfgok_bit)), PCI_MODE); - //use 8 dw burse length - AMAZON_PCI_REG32(FPI_BURST_LENGTH) = 0x303; - - amazon_pci_controller.io_map_base = (unsigned long)ioremap(AMAZON_PCI_IO_BASE, AMAZON_PCI_IO_SIZE - 1); - register_pci_controller(&amazon_pci_controller); - return 0; -} -arch_initcall(amazon_pci_init); diff --git a/target/linux/amazon/files/arch/mips/amazon/prom.c b/target/linux/amazon/files/arch/mips/amazon/prom.c deleted file mode 100644 index 3095fd50ba..0000000000 --- a/target/linux/amazon/files/arch/mips/amazon/prom.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright 2007 John Crispin <blogic@openwrt.org> - */ - -#include <linux/init.h> -#include <linux/string.h> -#include <linux/ctype.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/bootmem.h> -#include <linux/ioport.h> -#include <asm/bootinfo.h> -#include <asm/amazon/amazon.h> -#include <asm/amazon/irq.h> -#include <asm/amazon/model.h> -#include <asm/cpu.h> - -void prom_putchar(char c) -{ - /* Wait for FIFO to empty */ - while ((amazon_readl(AMAZON_ASC_FSTAT) >> 8) != 0x00) ; - /* Crude cr/nl handling is better than none */ - if(c == '\n') - amazon_writel('\r', AMAZON_ASC_TBUF); - amazon_writel(c, AMAZON_ASC_TBUF); -} - -void __init prom_init(void) -{ - char **envp = (char **) fw_arg2; - - int memsize = 16; /* assume 16M as default */ - - envp = (char **)KSEG1ADDR((unsigned long)envp); - while (*envp) { - char *e = (char *)KSEG1ADDR(*envp); - - if (!strncmp(e, "memsize=", 8)) { - e += 8; - memsize = simple_strtoul(e, NULL, 10); - } - envp++; - } - memsize *= 1024 * 1024; - - strcpy(&(arcs_cmdline[0]), "console=ttyS0,115200 rootfstype=squashfs,jffs2"); - - add_memory_region(0x00000000, memsize, BOOT_MEM_RAM); -} - -void prom_free_prom_memory(void) -{ -} - -const char *get_system_type(void) -{ - return BOARD_SYSTEM_TYPE; -} diff --git a/target/linux/amazon/files/arch/mips/amazon/setup.c b/target/linux/amazon/files/arch/mips/amazon/setup.c deleted file mode 100644 index ff1a109d44..0000000000 --- a/target/linux/amazon/files/arch/mips/amazon/setup.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * Copyright (C) 2004 Peng Liu <peng.liu@infineon.com> - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - */ - -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/delay.h> - -#include <asm/reboot.h> -#include <asm/system.h> -#include <asm/time.h> -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/mipsregs.h> -#include <asm/amazon/amazon.h> -#include <asm/amazon/irq.h> -#include <asm/amazon/model.h> - -static unsigned int r4k_offset; -static unsigned int r4k_cur; - -/* required in arch/mips/kernel/kspd.c */ -unsigned long cpu_khz; - -static void amazon_reboot_setup(void); - -/* the CPU clock rate - lifted from u-boot */ -unsigned int amazon_get_cpu_hz(void) -{ - /*-----------------------------------*/ - /**CGU CPU Clock Reduction Register***/ - /*-----------------------------------*/ - switch(amazon_readl(AMAZON_CGU_CPUCRD) & 0x3){ - case 0: - /*divider ration 1/1, 235 MHz clock */ - return 235000000; - case 1: - /*divider ration 2/3, 235 MHz clock, clock not accurate, here */ - return 150000000; - case 2: - /*divider ration 1/2, 235 MHz clock */ - return 117500000; - default: - /*divider ration 1/4, 235 MHz clock */ - return 58750000; - } -} - -/* the FPI clock rate - lifted from u-boot */ -unsigned int amazon_get_fpi_hz(void) -{ - unsigned int clkCPU; - clkCPU = amazon_get_cpu_hz(); - - /*-------------------------------------*/ - /***CGU Clock Divider Select Register***/ - /*-------------------------------------*/ - switch (amazon_readl(AMAZON_CGU_DIV) & 0x3) - { - case 1: - return clkCPU >> 1; - case 2: - return clkCPU >> 2; - default: - return clkCPU; - /* '11' is reserved */ - } -} -EXPORT_SYMBOL(amazon_get_fpi_hz); - -/* this doesn't really belong here, but it's a convenient location */ -unsigned int amazon_get_cpu_ver(void) -{ - static unsigned int cpu_ver = 0; - if (cpu_ver == 0) - cpu_ver = amazon_readl(AMAZON_MCD_CHIPID) & 0xFFFFF000; - return cpu_ver; -} - -static inline u32 amazon_get_counter_resolution(void) -{ - u32 res; - __asm__ __volatile__( - ".set push\n" - ".set mips32r2\n" - ".set noreorder\n" - "rdhwr %0, $3\n" - "ehb\n" - ".set pop\n" - : "=&r" (res) - : /* no input */ - : "memory"); - instruction_hazard(); - return res; -} - -void __init plat_time_init(void) -{ - mips_hpt_frequency = amazon_get_cpu_hz() / amazon_get_counter_resolution(); - r4k_offset = mips_hpt_frequency / HZ; - printk("mips_hpt_frequency:%d\n", mips_hpt_frequency); - printk("r4k_offset: %08x(%d)\n", r4k_offset, r4k_offset); - - r4k_cur = (read_c0_count() + r4k_offset); - write_c0_compare(r4k_cur); - - /* enable the timer in the PMU */ - amazon_writel(amazon_readl(AMAZON_PMU_PWDCR)| AMAZON_PMU_PWDCR_GPT|AMAZON_PMU_PWDCR_FPI, AMAZON_PMU_PWDCR); - - /* setup the GPTU for timer tick f_fpi == f_gptu*/ - amazon_writel(0x0100, AMAZON_GPTU_CLC); - amazon_writel(0xffff, AMAZON_GPTU_CAPREL); - amazon_writel(0x80C0, AMAZON_GPTU_T6CON); -} - -void __init plat_mem_setup(void) -{ - u32 chipid = 0; - u32 part_no = 0; - - chipid = amazon_readl(AMAZON_MCD_CHIPID); - part_no = AMAZON_MCD_CHIPID_PART_NUMBER_GET(chipid); - - if(part_no == AMAZON_CHIPID_YANGTSE){ - printk("Yangtse Version\n"); - } else if (part_no == AMAZON_CHIPID_STANDARD) { - printk(SYSTEM_MODEL_NAME "\n"); - } else { - printk("unknown version %8x\n",part_no); - } - - amazon_reboot_setup(); - - //stop reset TPE and DFE - amazon_writel(0, AMAZON_RST_REQ); - //clock - amazon_writel(0x3fff, AMAZON_PMU_PWDCR); - //reenable trace capability - part_no = readl(AMAZON_BCU_ECON); - - ioport_resource.start = IOPORT_RESOURCE_START; - ioport_resource.end = IOPORT_RESOURCE_END; - iomem_resource.start = IOMEM_RESOURCE_START; - iomem_resource.end = IOMEM_RESOURCE_END; -} - -static void amazon_machine_restart(char *command) -{ - local_irq_disable(); - amazon_writel(AMAZON_RST_ALL, AMAZON_RST_REQ); - for (;;) ; -} - -static void amazon_machine_halt(void) -{ - printk(KERN_NOTICE "System halted.\n"); - local_irq_disable(); - for (;;) ; -} - -static void amazon_machine_power_off(void) -{ - printk(KERN_NOTICE "Please turn off the power now.\n"); - local_irq_disable(); - for (;;) ; -} - -static void amazon_reboot_setup(void) -{ - _machine_restart = amazon_machine_restart; - _machine_halt = amazon_machine_halt; - pm_power_off = amazon_machine_power_off; -} diff --git a/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/irq.h b/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/irq.h deleted file mode 100644 index e72b7d5c11..0000000000 --- a/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/irq.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __AMAZON_IRQ_H -#define __AMAZON_IRQ_H - -#define NR_IRQS 256 -#include_next <irq.h> - -#endif diff --git a/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/mangle-port.h b/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/mangle-port.h deleted file mode 100644 index af8c3e9394..0000000000 --- a/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/mangle-port.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 2004 Ralf Baechle - */ -#ifndef __ASM_MACH_AMAZON_MANGLE_PORT_H -#define __ASM_MACH_AMAZON_MANGLE_PORT_H - -#define __swizzle_addr_b(port) (port) -#define __swizzle_addr_w(port) ((port) ^ 2) -#define __swizzle_addr_l(port) (port) -#define __swizzle_addr_q(port) (port) - -/* - * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware; - * less sane hardware forces software to fiddle with this... - * - * Regardless, if the host bus endianness mismatches that of PCI/ISA, then - * you can't have the numerical value of data and byte addresses within - * multibyte quantities both preserved at the same time. Hence two - * variations of functions: non-prefixed ones that preserve the value - * and prefixed ones that preserve byte addresses. The latters are - * typically used for moving raw data between a peripheral and memory (cf. - * string I/O functions), hence the "__mem_" prefix. - */ -#if defined(CONFIG_SWAP_IO_SPACE) - -# define ioswabb(a, x) (x) -# define __mem_ioswabb(a, x) (x) -# define ioswabw(a, x) le16_to_cpu(x) -# define __mem_ioswabw(a, x) (x) -# define ioswabl(a, x) le32_to_cpu(x) -# define __mem_ioswabl(a, x) (x) -# define ioswabq(a, x) le64_to_cpu(x) -# define __mem_ioswabq(a, x) (x) - -#else - -# define ioswabb(a, x) (x) -# define __mem_ioswabb(a, x) (x) -# define ioswabw(a, x) (x) -# define __mem_ioswabw(a, x) cpu_to_le16(x) -# define ioswabl(a, x) (x) -# define __mem_ioswabl(a, x) cpu_to_le32(x) -# define ioswabq(a, x) (x) -# define __mem_ioswabq(a, x) cpu_to_le32(x) - -#endif - -#endif /* __ASM_MACH_AMAZON_MANGLE_PORT_H */ diff --git a/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/war.h b/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/war.h deleted file mode 100644 index da42ee5a21..0000000000 --- a/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/war.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ -#ifndef __ASM_MIPS_MACH_AMAZON_WAR_H -#define __ASM_MIPS_MACH_AMAZON_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif diff --git a/target/linux/amazon/files/drivers/atm/amazon_tpe.c b/target/linux/amazon/files/drivers/atm/amazon_tpe.c deleted file mode 100644 index b507494407..0000000000 --- a/target/linux/amazon/files/drivers/atm/amazon_tpe.c +++ /dev/null @@ -1,3074 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - */ -//----------------------------------------------------------------------- -/* - * Description: - * Driver for Infineon Amazon TPE - */ -//----------------------------------------------------------------------- -/* Author: peng.liu@infineon.com - * Created: 12-April-2004 - */ -//----------------------------------------------------------------------- -/* History - * Last changed on: 13 Oct. 2004 - * Last changed by: peng.liu@infineon.com - * Last changed on: 28 Jan. 2004 - * Last changed by: peng.liu@infineon.com - * Last changed Reason: - * - AAL5R may send more bytes than expected in MFL (so far, confirmed as 64 bytes) - */ -// 507261:tc.chen 2005/07/26 re-organize code address map to improve performance. -// 507281:tc.chen 2005/07/28 fix f4 segment isssue -/* 511045:linmars 2005/11/04 from Liu.Peng: change NRT_VBR bandwidth calculation based on scr instead of pcr */ - -#ifndef __KERNEL__ -#define __KERNEL__ -#endif -#ifndef EXPORT_SYMTAB -#define EXPORT_SYMTAB -#endif - -/*TPE level loopback, bypass AWARE DFE */ -#undef TPE_LOOPBACK - -/* enable debug options */ -#undef AMAZON_ATM_DEBUG - -/* enable rx error packet analysis */ -#undef AMAZON_ATM_DEBUG_RX - -/* test AAL5 Interrupt */ -#undef AMAZON_TPE_TEST_AAL5_INT - -/* dump packet */ -#undef AMAZON_TPE_DUMP - -/* read ARC register*/ -/* this register is located in side DFE module*/ -#undef AMAZON_TPE_READ_ARC - -/* software controlled reassembly */ -#undef AMAZON_TPE_SCR - -/* recovery from AAL5 bug */ -#undef AMAZON_TPE_AAL5_RECOVERY - -#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY) -#define ALPHAEUS_BASE_ADDR 0x31c00 -#define A_CFG_ADDR (ALPHAEUS_BASE_ADDR+0x04) -#define AR_CB0_STATUS_ADDR (ALPHAEUS_BASE_ADDR+0x2c) -#define AR_CB1_STATUS_ADDR (ALPHAEUS_BASE_ADDR+0x30) -#define AT_CELL0_ADDR (ALPHAEUS_BASE_ADDR+0x90) -#define AR_CELL0_ADDR (ALPHAEUS_BASE_ADDR+0x1a0) -#define AR_CD_CNT0_ADDR (ALPHAEUS_BASE_ADDR+0x1c8) -#endif - -#include <linux/module.h> -#include <linux/config.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/fs.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/time.h> -#include <linux/atm.h> -#include <linux/atmdev.h> -#include <linux/netdevice.h> -#include <asm/byteorder.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/atomic.h> -#include <asm/bitops.h> -#include <asm/system.h> - -#include <asm/amazon/amazon.h> -#include <asm/amazon/irq.h> - -#include <linux/in.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/ip.h> -#include <linux/tcp.h> -#include <linux/skbuff.h> -#include <linux/in6.h> -#include <linux/delay.h> -#include <asm/amazon/atm_defines.h> -#include <asm/amazon/amazon_dma.h> -#include <asm/amazon/amazon_tpe.h> - -#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY) -#include <asm/amazon/amazon_mei.h> -#include <asm/amazon/amazon_mei_app.h> -#endif - -#define AMAZON_TPE_EMSG(fmt, args...) printk( KERN_ERR "%s: " fmt,__FUNCTION__, ## args) - -/***************************************** External Functions *******************************************/ -extern unsigned int amazon_get_fpi_hz(void); -extern void mask_and_ack_amazon_irq(unsigned int irq_nr); -extern void amz_push_oam(unsigned char *); - -//amazon_mei.c -#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY) -extern MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize); -extern MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize); -#endif - -/***************************************** Internal Functions *******************************************/ -int amazon_atm_read_procmem(char *buf, char **start, off_t offset,int count, int *eof, void *data); -/***************************************** Global Data *******************************************/ -amazon_atm_dev_t g_atm_dev; //device data -static struct tq_struct swex_start_task; //BH task -static struct tq_struct swex_complete_task; //BH task -#ifdef AMAZON_TPE_SCR -static struct tq_struct a5r_task; //BH task -#endif -static struct dma_device_info g_dma_dev; //for DMA -static struct atm_dev * amazon_atm_devs[AMAZON_ATM_PORT_NUM]; -static struct oam_last_activity g_oam_time_stamp[AMAZON_ATM_MAX_VCC_NUM]; -static u8 g_oam_cell[AMAZON_AAL0_SDU+4]; //for OAM cells -#ifdef AMAZON_CHECK_LINK -static int adsl_link_status; //ADSL link status, 0:down, 1:up -#endif //AMAZON_CHECK_LINK -/***************************************** Module Parameters *************************************/ -// Parameter Definition for module -static int port_enable0 = 1; // Variable for parameter port_enable0 -static int port_enable1 = 0; // Variable for parameter port_enable1 -static int port_max_conn0 = 15; // Variable for parameter port_max_conn0 -static int port_max_conn1 = 0; // Variable for parameter port_max_conn1 -static int port_cell_rate_up0 = 7500; // Variable for parameter port_cell_rate_up0 -static int port_cell_rate_up1 = 7500; // Variable for parameter port_cell_rate_up1 - - -static int qsb_tau = 1; // Variable for parameter qsb_tau -static int qsb_srvm = 0xf; // Variable for parameter qsb_srvm -static int qsb_tstep = 4 ; // Variable for parameter qsb_tstep - -static int cbm_nrt = 3900; // Variable for parameter cbm_nrt -static int cbm_clp0 =3500; // Variable for parameter cbm_clp0 -static int cbm_clp1 =3200; // Variable for parameter cbm_clp1 -static int cbm_free_cell_no = AMAZON_ATM_FREE_CELLS; // Variable for parameter cbm_free_cell_no - -static int a5_fill_pattern = 0x7e; // Variable for parameter a5_fill_pattern '~' -static int a5s_mtu = 0x700; // mtu for tx -static int a5r_mtu = 0x700; // mtu for rx - -static int oam_q_threshold = 64; // oam queue threshold, minium value 64 -static int rx_q_threshold = 1000; // rx queue threshold, minium value 64 -static int tx_q_threshold = 800; // tx queue threshold, minium value 64 - -MODULE_PARM(port_max_conn0, "i"); -MODULE_PARM_DESC(port_max_conn0, "Maximum atm connection for port #0"); -MODULE_PARM(port_max_conn1, "i"); -MODULE_PARM_DESC(port_max_conn1, "Maximum atm connection for port #1"); -MODULE_PARM(port_enable0, "i"); -MODULE_PARM_DESC(port_enable0, "0 -> port disabled, 1->port enabled"); -MODULE_PARM(port_enable1, "i"); -MODULE_PARM_DESC(port_enable1, "0 -> port disabled, 1->port enabled"); -MODULE_PARM(port_cell_rate_up0, "i"); -MODULE_PARM_DESC(port_cell_rate_up0, "ATM port upstream rate in cells/s"); -MODULE_PARM(port_cell_rate_up1, "i"); -MODULE_PARM_DESC(port_cell_rate_up1, "ATM port upstream rate in cells/s"); - -MODULE_PARM(qsb_tau,"i"); -MODULE_PARM_DESC(qsb_tau, "Cell delay variation. value must be > 0"); -MODULE_PARM(qsb_srvm, "i"); -MODULE_PARM_DESC(qsb_srvm, "Maximum burst size"); -MODULE_PARM(qsb_tstep, "i"); -MODULE_PARM_DESC(qsb_tstep, "n*32 cycles per sbs cycles n=1,2,4"); - -MODULE_PARM(cbm_nrt, "i"); -MODULE_PARM_DESC(cbm_nrt, "Non real time threshold for cell buffer"); -MODULE_PARM(cbm_clp0, "i"); -MODULE_PARM_DESC(cbm_clp0, "Threshold for cells with cell loss priority 0"); -MODULE_PARM(cbm_clp1, "i"); -MODULE_PARM_DESC(cbm_clp1, "Threshold for cells with cell loss priority 1"); -MODULE_PARM(cbm_free_cell_no, "i"); -MODULE_PARM_DESC(cbm_free_cell_no, "Number of cells in the cell buffer manager"); - -MODULE_PARM(a5_fill_pattern, "i"); -MODULE_PARM_DESC(a5_fill_pattern, "filling pattern (PAD) for aal5 frames"); -MODULE_PARM(a5s_mtu, "i"); -MODULE_PARM_DESC(a5s_mtu, "max. SDU for upstream"); -MODULE_PARM(a5r_mtu, "i"); -MODULE_PARM_DESC(a5r_mtu, "max. SDU for downstream"); - -MODULE_PARM(oam_q_threshold, "i"); -MODULE_PARM_DESC(oam_q_threshold, "oam queue threshold"); - -MODULE_PARM(rx_q_threshold, "i"); -MODULE_PARM_DESC(rx_q_threshold, "downstream/rx queue threshold"); - -MODULE_PARM(tx_q_threshold, "i"); -MODULE_PARM_DESC(tx_q_threshold, "upstream/tx queue threshold"); - -/***************************************** local functions *************************************/ -/* Brief: valid QID - * Return: 1 if valid - * 0 if not - */ -static inline int valid_qid(int qid) -{ - return ( (qid>0) && (qid<AMAZON_ATM_MAX_QUEUE_NUM)); -} - -/* - * Brief: align to 16 bytes boundary - * Parameter: - * skb - * Description: - * use skb_reserve to adjust the data pointer - * don't change head pointer - * pls allocate extrac 16 bytes before call this function - */ -static void inline alloc_align_16(struct sk_buff * skb) -{ - if ( ( ((u32) (skb->data)) & 15) != 0){ - AMAZON_TPE_DMSG("need to adjust the alignment manually\n"); - skb_reserve(skb, 16 - (((u32) (skb->data)) & 15) ); - } - -} - -/* - * Brief: initialize the device according to the module paramters - * Return: not NULL - ok - * NULL - fails - * Description: arrange load parameters and call the hardware initialization routines - */ -static void atm_init_parameters(amazon_atm_dev_t *dev) -{ - //port setting - dev->ports[0].enable = port_enable0; - dev->ports[0].max_conn = port_max_conn0; - dev->ports[0].tx_max_cr = port_cell_rate_up0; - if (port_enable1){ - dev->ports[1].enable = port_enable1; - dev->ports[1].max_conn = port_max_conn1; - dev->ports[1].tx_max_cr = port_cell_rate_up1; - } - - //aal5 - dev->aal5.padding_byte = a5_fill_pattern; - dev->aal5.tx_max_sdu = a5s_mtu; - dev->aal5.rx_max_sdu = a5r_mtu; - - //cbm - dev->cbm.nrt_thr = cbm_nrt; - dev->cbm.clp0_thr = cbm_clp0; - dev->cbm.clp1_thr = cbm_clp1; - dev->cbm.free_cell_cnt = cbm_free_cell_no; - - //qsb - dev->qsb.tau = qsb_tau; - dev->qsb.tstepc =qsb_tstep; - dev->qsb.sbl = qsb_srvm; - - //allocate on the fly - dev->cbm.mem_addr = NULL; - dev->cbm.qd_addr = NULL; -} - - -/* Brief: Find QID for VCC - * Parameters: vcc - VCC data structure - * Return Value: -EINVAL - VCC not found - * qid - QID for this VCC - * Description: - * This function returns the QID of a given VCC - */ -static int amazon_atm_get_queue(struct atm_vcc* vcc) -{ - int i; - for (i=0;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) { - if (g_atm_dev.queues[i].vcc == vcc) return i; - } - return -EINVAL; -} - - -/* - * Brief: Find QID for VPI/VCI - * Parameters: vpi - VPI to found - * vci - VCI to found - * - * Return Value: -EINVAL - VPI/VCI not found - * qid - QID for this VPI/VCI - * - * Description: - * This function returns the QID for a given VPI/VCI. itf doesn't matter - */ -static int amazon_atm_find_vpivci(u8 vpi, u16 vci) -{ - int i; - struct atm_vcc * vcc; - for (i=0;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) { - if ( (vcc = g_atm_dev.queues[i].vcc)!= NULL) { - if ((vcc->vpi == vpi) && (vcc->vci == vci)) return i; - } - } - return -EINVAL; -} - -/* Brief: Find QID for VPI - * Parameters: vpi - VPI to found - * Return Value: -EINVAL - VPI not found - * qid - QID for this VPI - * - * Description: - * This function returns the QID for a given VPI. itf and VCI don't matter - */ -static int amazon_atm_find_vpi(u8 vpi) -{ - int i; - for (i=0;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) { - if ( g_atm_dev.queues[i].vcc!= NULL) { - if (g_atm_dev.queues[i].vcc->vpi == vpi) return i; - } - } - return -EINVAL; -} - -/* - * Brief: Clears QID entries for VCC - * - * Parameters: vcc - VCC to found - * - * Description: - * This function searches for the given VCC and sets it to NULL if found. - */ -static inline void amazon_atm_clear_vcc(int i) -{ - g_atm_dev.queues[i].vcc = NULL; - g_atm_dev.queues[i].free = 1; -} - - -/* - * Brief: dump skb data - */ -static inline void dump_skb(u32 len, char * data) -{ -#ifdef AMAZON_TPE_DUMP - int i; - for(i=0;i<len;i++){ - printk("%2.2x ",(u8)(data[i])); - if (i % 16 == 15) - printk("\n"); - } - printk("\n"); -#endif -} - -/* - * Brief: dump queue descriptor - */ -static inline void dump_qd(int qid) -{ -#ifdef AMAZON_TPE_DUMP - u8 * qd_addr; - if (valid_qid(qid) != 1) return; - qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr); - AMAZON_TPE_EMSG("qid: %u [%8x][%8x][%8x][%8x]\n", qid - ,readl(qd_addr+qid*CBM_QD_SIZE+0x0) - ,readl(qd_addr+qid*CBM_QD_SIZE+0x4) - ,readl(qd_addr+qid*CBM_QD_SIZE+0x8) - ,readl(qd_addr+qid*CBM_QD_SIZE+0xc)); -#endif -} - -/* - * Brief: release TX skbuff - */ -static inline void amazon_atm_free_tx_skb_vcc(struct atm_vcc *vcc, struct sk_buff *skb) -{ - if ( vcc->pop != NULL) { - vcc->pop(vcc, skb); - } else { - dev_kfree_skb_any(skb); - } -} -/* - * Brief: release TX skbuff - */ -static inline void amazon_atm_free_tx_skb(struct sk_buff *skb) -{ - struct atm_vcc* vcc = ATM_SKB(skb)->vcc; - if (vcc!=NULL){ - amazon_atm_free_tx_skb_vcc(vcc,skb); - } else { - dev_kfree_skb_any(skb);//fchang:Added - } -} - -/* Brief: divide by 64 and round up - */ -static inline u32 divide_by_64_round_up(int input) -{ - u32 tmp1; - tmp1 = (u32) input; - tmp1 = (tmp1%64)?(tmp1/64 + 1): (tmp1/64); - if (tmp1 == 0) tmp1 = 1; - return tmp1; -} - -/* - * Brief: statistics - */ -#ifdef AMAZON_ATM_DEBUG -static inline void queue_statics(int qid, qs_t idx) -{ - if (valid_qid(qid)){ - g_atm_dev.queues[qid].qs[idx]++; - } -} -#else //not AMAZON_ATM_DEBUG -static inline void queue_statics(int qid, qs_t idx){} -#endif //AMAZON_ATM_DEBUG - - -/* Brief: set dma tx full, i.e. there is no available descriptors - */ -static void inline atm_dma_full(void) -{ - AMAZON_TPE_DMSG("ch0 is full\n"); - atomic_set(&g_atm_dev.dma_tx_free_0,0); -} - -/* - * Brief set dma tx free (at least one descript is available) - */ -inline static void atm_dma_free(void) -{ - AMAZON_TPE_DMSG("ch0 is free\n"); - atomic_set(&g_atm_dev.dma_tx_free_0,1); -} - - -/* Brief: return the status of DMA TX descriptors - * Parameters: TX channel (DMA_TX_CH0, TX_CH1) - * Return: - * 1: there are availabel TX descriptors - * 0: no available - * Description: - * - */ -inline int dma_may_send(int ch) -{ - if (atomic_read(&g_atm_dev.dma_tx_free_0)){ - return 1; - } - return 0; -} - -/******************************* global functions *********************************/ -/* - * Brief: SWIE Cell Extraction Start Routine - * and task routine for swex_complete_task - * Parameters: irq_stat - interrupt status - * - * Description: - * This is the routine for extracting cell. It will schedule itself if the hardware is busy. - * This routine runs in interrupt context - */ -void amazon_atm_swex(void * irq_stat) -{ - u32 ex_stat=0; - u32 addr; - // Read extraction status register - ex_stat = readl(CBM_HWEXSTAT0_ADDR); - - // Check if extraction/insertion is in progress - if ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) || (test_and_set_bit(SWIE_LOCK, &(g_atm_dev.swie.lock))!=0)) { - AMAZON_TPE_DMSG(" extraction in progress. Will wait\n"); - swex_start_task.data = irq_stat; - queue_task(&swex_start_task, &tq_immediate); - mark_bh(IMMEDIATE_BH); - }else { - // Extract QID - g_atm_dev.swie.qid = (((u32)irq_stat) >> 24); - AMAZON_TPE_DMSG("extracting from qid=%u\n",g_atm_dev.swie.qid); - //read status word - addr = KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr); - addr = readl((addr + g_atm_dev.swie.qid * 0x10 + 4) & 0xFFFFFFC0); - addr = KSEG1ADDR(addr); - g_atm_dev.swie.sw = readl(addr+52)&SWIE_ADDITION_DATA_MASK; - AMAZON_TPE_DMSG("cell addition word: %8x \n", g_atm_dev.swie.sw); - - // Start extraction - AMAZON_WRITE_REGISTER_L(g_atm_dev.swie.qid | SWIE_CBM_PID_SUBADDR, CBM_HWEXPAR0_ADDR); - AMAZON_WRITE_REGISTER_L(SWIE_CBM_SCE0, CBM_HWEXCMD_ADDR); - } -} -#ifdef AMAZON_TPE_SCR -u32 g_a5r_wait=0; -/* - * Brief: AAL5 Packet Extraction Routine and task routine for a5r_task - * Parameters: irq_stat - interrupt status - * - * Description: - * This is the routine for extracting frame. It will schedule itself if the hardware is busy. - * This routine runs in interrupt context - */ -void amazon_atm_a5r(void* qid) -{ - volatile u32 ex_stat=0; - u32 addr; - u32 a5r_wait=0; - - ex_stat = readl(CBM_HWEXSTAT0_ADDR); -#if 0 - // Check if extraction/insertion is in progress - if ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) ) { - AMAZON_TPE_DMSG(" extraction in progress. Will wait\n"); - a5r_task.data = qid; - queue_task(&a5r_task, &tq_immediate); - mark_bh(IMMEDIATE_BH); - }else { - AMAZON_TPE_DMSG("extracting from qid=%u\n",(u8)qid); - // Start extraction - AMAZON_WRITE_REGISTER_L(((u8)qid) | CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR); - AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR); - } -#else - //while ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) ) { - while ( ex_stat != 0x80){ - a5r_wait++; - ex_stat = readl(CBM_HWEXSTAT0_ADDR); -#if 0 - if (a5r_wait >= 0xffffff){ - a5r_wait=0; - printk("."); - } -#endif - } - if (a5r_wait > g_a5r_wait){ - g_a5r_wait = a5r_wait; - } - AMAZON_WRITE_REGISTER_L(((u8)qid) | CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR); - AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR); -#endif -} - -#endif //AMAZON_TPE_SCR - -/* Brief: Handle F4/F5 OAM cell - * Return: - * 0 ok - * <0 fails - */ -static int inline amazon_handle_oam_cell(void *data, u8 vpi, u16 vci,u32 status) -{ - struct atm_vcc* vcc=NULL; - int qid; - if (!status&SWIE_EOAM_MASK){ - AMAZON_TPE_EMSG("unknown cell received, discarded\n"); - goto amazon_handle_oam_cell_err_exit; - }else if (status&SWIE_ECRC10ERROR_MASK){ - AMAZON_TPE_EMSG("CRC-10 Error Status:%8x, discarded\n", status); - goto amazon_handle_oam_cell_err_exit; - }else{ - if(status & (SWIE_EVCI3_MASK |SWIE_EVCI4_MASK)){ - //F4 level (VPI) OAM, Assume duplex - qid = amazon_atm_find_vpi(vpi)+CBM_RX_OFFSET; - }else if (status & (SWIE_EPTI4_MASK|SWIE_EPTI5_MASK)){ - //F5 level (VCI) OAM, Assume duplex - qid = amazon_atm_find_vpivci(vpi,vci)+CBM_RX_OFFSET; - }else{ - qid = -1; - AMAZON_TPE_EMSG("non-F4/F5 OAM cells?, discarded\n"); - goto amazon_handle_oam_cell_err_exit; - } - } - if (valid_qid(qid) && ((vcc = g_atm_dev.queues[qid].vcc)!=NULL)){ - //TODO, should we do this for ALL OAM types? (Actually only User and CC) - g_atm_dev.queues[qid].access_time=xtime; - if (vcc->push_oam){ - (*vcc->push_oam)(vcc,data); - }else{ - amz_push_oam(data); - } - }else{ - AMAZON_TPE_EMSG("no VCC yet\n"); - goto amazon_handle_oam_cell_err_exit; - } - return 0; -amazon_handle_oam_cell_err_exit: - dump_skb(AMAZON_AAL0_SDU,(char *)data); - return -1; -} - -/* Brief: SWIE Cell Extraction Finish Routine - * and task routine for swex_complete_task - * Description: - * 1.Allocate a buffer of type struct sk_buff - * 2.Copy the data from the temporary memory to this buffer - * 3.Push the data to upper layer - * 4.Update the statistical data if necessary - * 5.Release the temporary data - - */ -void amazon_atm_swex_push(void * data) -{ - struct atm_vcc* vcc=NULL; - struct sk_buff* skb=NULL; - struct amazon_atm_cell_header * cell_header; - u32 status; - int qid; - if (!data){ - AMAZON_TPE_EMSG("data is NULL\n"); - return; - } - qid = ((u8*)data)[AMAZON_AAL0_SDU]; - status = ((u32*)data)[ATM_AAL0_SDU/4]; - cell_header = (struct amazon_atm_cell_header *) data; - if (valid_qid(qid) != 1){ - AMAZON_TPE_EMSG("error qid: %u\n",qid); - AMAZON_TPE_EMSG("unknown cells recieved\n"); - }else if (qid == AMAZON_ATM_OAM_Q_ID){ - //OAM or RM or OTHER cell - //Find real connection - -#ifdef IKOS_MINI_BOOT - //for OAM loop back test - dump_skb(56,(char *)data); - //kfree(data); using g_oam_cell - return; -#endif //IKOS_MINI_BOOT -#ifdef TPE_LOOPBACK - amz_push_oam(data); - return; -#endif//TPE_LOOPBACK - int ret = 0; - ret = amazon_handle_oam_cell(data,cell_header->bit.vpi,cell_header->bit.vci,status); - if (ret == 0) - return; - }else{ - //should be normal AAL0 cells - // Get VCC - vcc = g_atm_dev.queues[qid].vcc; - if (vcc != NULL) { - AMAZON_TPE_DMSG("push to upper layer\n"); - skb = dev_alloc_skb(AMAZON_AAL0_SDU); - if (skb != NULL) { - //skb->dev=vcc->dev; - memcpy(skb_put(skb, AMAZON_AAL0_SDU), data, AMAZON_AAL0_SDU); - skb->stamp = xtime; - ATM_SKB(skb)->vcc = vcc; - (*g_atm_dev.queues[qid].push)(vcc,skb,0); - }else{ - AMAZON_TPE_EMSG(" No memory left for incoming AAL0 cell! Cell discarded!\n"); - //inform the upper layer - (*g_atm_dev.queues[qid].push)(vcc,skb,-ENOMEM); - atomic_inc(&vcc->stats->rx_drop); - } - }else{ - AMAZON_TPE_EMSG("invalid qid %u\n",qid); - } - } - //kfree(data); using g_oam_cell -} - -/* - * Brief: Interrupt handler for software cell extraction (done) - * Parameters: irq - CPPN for this interrupt - * data - Device ID for this interrupt - * regs - Register file - * - * Description: - * When a software extraction is finished this interrupt is issued. - * It reads the cell data and sends it to the ATM stack. - */ -void amazon_atm_swex_isr(int irq, void *data, struct pt_regs *regs) -{ - u32 * cell = NULL; - int i; - //ATM_AAL0 SDU + QID - AMAZON_TPE_DMSG("SWIE extraction done\n"); - cell = (u32 *) g_oam_cell; - if (cell != NULL){ - //convert to host byte order from big endian - for(i=0;i<ATM_AAL0_SDU;i+=4){ - cell[i/4]=readl(SWIE_ECELL_ADDR+i); - } - cell[ATM_AAL0_SDU/4]= g_atm_dev.swie.sw; - ((u8*)cell)[AMAZON_AAL0_SDU] = g_atm_dev.swie.qid; -#ifdef IKOS_MINI_BOOT - for(i=0;i<ATM_AAL0_SDU;i+=4){ - AMAZON_TPE_DMSG("[%2x][%2x][%2x][%2x]\n", - ((char*)cell)[i], - ((char*)cell)[i+1], - ((char*)cell)[i+2], - ((char*)cell)[i+3] - ); - } - AMAZON_TPE_DMSG("qid: %u\n", ((u8*)cell)[AMAZON_AAL0_SDU]); - amazon_atm_swex_push((void *) cell); -#else //not IKOS_MINI_BOOT - swex_complete_task.data = cell; - queue_task(&swex_complete_task,&tq_immediate); - mark_bh(IMMEDIATE_BH); -#endif //not IKOS_MINI_BOOT - }else{ - AMAZON_TPE_EMSG("no memory for receiving AAL0 cell\n"); - } - - /* release the lock and check */ - if (test_and_clear_bit(SWIE_LOCK,&(g_atm_dev.swie.lock)) == 0){ - AMAZON_TPE_EMSG("swie lock is already released\n"); - } - wake_up(&g_atm_dev.swie.sleep); -} -/* Brief: Interrupt handler for software cell insertion - * - * Parameters: irq - CPPN for this interrupt - * data - Device ID for this interrupt - * regs - Register file - * - * Description: - * When a software insertion is finished this interrupt is issued. - * The only purpose is to release the semaphore and read the status register. - */ -void amazon_atm_swin_isr(int irq, void *data, struct pt_regs *regs) -{ - AMAZON_TPE_DMSG("SWIE insertion done\n"); - /* release the lock and check */ - if (test_and_clear_bit(SWIE_LOCK,&(g_atm_dev.swie.lock)) == 0){ - AMAZON_TPE_EMSG("swie lock is already released"); - } - // Release semaphore - up(&g_atm_dev.swie.in_sem); - -} -/* Brief: Interrupt handler for software cell insertion & extraction - * Parameters: irq - CPPN for this interrupt - * data - Device ID for this interrupt - * regs - Register file - * Description: - * When a software insertion or extractionis finished this interrupt is issued. - */ -void amazon_atm_swie_isr(int irq, void *data, struct pt_regs *regs) -{ - u32 status=0; - // Read status register - status = readl(SWIE_ISTAT_ADDR); - AMAZON_TPE_DMSG("insertion status: %8x\n", status); - if (status & SWIE_ISTAT_DONE){ - //clear interrupt in peripheral and ICU - AMAZON_WRITE_REGISTER_L(SRC_TOS_MIPS | SRC_CLRR|SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ISRC_ADDR); - mask_and_ack_amazon_irq(AMAZON_SWIE_INT); - - amazon_atm_swin_isr(irq,data,regs); - } - status = readl(SWIE_ESTAT_ADDR); - AMAZON_TPE_DMSG("extraction status: %8x\n", status); - if (status & SWIE_ESTAT_DONE){ - //clear interrupt - AMAZON_WRITE_REGISTER_L(SRC_TOS_MIPS | SRC_CLRR|SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ESRC_ADDR); - mask_and_ack_amazon_irq(AMAZON_SWIE_INT); - - amazon_atm_swex_isr(irq,data,regs); - } - //clear interrupt in ICU -} - -/* - * Brief: Insert ATM cell into CBM - * Parameters: queue - Target queue - * cell - Pointer to cell data - * Return Value: EBUSY - CBM is busy - * 0 - OK, cell inserted - * Description: - * This function inserts a cell into the CBM using the software insertion - * method. The format of the cell should be - * Little Endian (address starting from 0) - * H3, H2, H1, H0, P3, P2, P1, P0, P7, P6, P5, P4, ..., P47, P46, P45, P44 - * Big Endian (address starting from 0) - * H0, H1, H2, H3, P0, P1, P2, P3, P4, P5, P6, P7, ..., P44, P45, P46, P47 - * This function does not free memory!!! - */ -int amazon_atm_swin(u8 queue, void* cell) -{ - u32 status=0; - int i; - // Read status register - status = readl(SWIE_ISTAT_ADDR); - AMAZON_TPE_DMSG(" SWIE status=0x%08x\n",status); - - AMAZON_TPE_DMSG(" Inserting cell qid=%u\n",queue); - -#ifdef AMAZON_CHECK_LINK - if (adsl_link_status == 0){ - return -EFAULT; - } -#endif //AMAZON_CHECK_LINK - - // Get semaphore (if possible) - if (down_interruptible(&g_atm_dev.swie.in_sem)) { - return -ERESTARTSYS; - } - /* try to set lock */ - wait_event_interruptible(g_atm_dev.swie.sleep,(test_and_set_bit(SWIE_LOCK,&(g_atm_dev.swie.lock)) == 0)); - if (signal_pending(current)){ - return -ERESTARTSYS; - } - - // Store cell in CBM memory - for(i=0;i<ATM_AAL0_SDU;i+=4){ - AMAZON_WRITE_REGISTER_L(((u32*)cell)[i/4],SWIE_ICELL_ADDR+i); - } - //Store queue id - AMAZON_WRITE_REGISTER_L((u32) queue,SWIE_IQID_ADDR); - - //Start SWIE - AMAZON_WRITE_REGISTER_L(SWIE_ICMD_START,SWIE_ICMD_ADDR); - - return 0; -} - -#ifdef AMAZON_ATM_DEBUG -/* - * Brief: Interrupt handler for HTU - * - * Parameters: irq - CPPN for this interrupt - * data - Device ID for this interrupt - * regs - Register file - * - */ -void amazon_atm_htu_isr(int irq, void *data, struct pt_regs *regs) -{ - u32 irq_stat=0; - - // Read interrupt status register - irq_stat = readl(HTU_ISR0_ADDR); - AMAZON_TPE_DMSG("HTU status: %8x\n",irq_stat); - //Clear interrupt in CBM and ICU - AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_HTU_INT, HTU_SRC0_ADDR); - mask_and_ack_amazon_irq(AMAZON_HTU_INT); - // Check if Any Cell Arrived - if (irq_stat & (HTU_ISR_NE | HTU_ISR_PNE) ) { - AMAZON_TPE_EMSG("INFNOENTRY %8x\n", readl(HTU_INFNOENTRY_ADDR)); - }else if (irq_stat & (HTU_ISR_TORD|HTU_ISR_PT)){ - AMAZON_TPE_EMSG("Time Out %8x\n", readl(HTU_INFTIMEOUT_ADDR)); - }else if (irq_stat & HTU_ISR_IT){ - AMAZON_TPE_EMSG("Interrupt Test\n"); - }else if (irq_stat & HTU_ISR_OTOC){ - AMAZON_TPE_EMSG("Overflow of Time Out Counter\n"); - }else if (irq_stat & HTU_ISR_ONEC){ - AMAZON_TPE_EMSG("Overflow of No Entry Counter\n"); - }else{ - AMAZON_TPE_EMSG("unknown HTU interrupt occurs %8x\n", irq_stat); - } - -} -#endif //AMAZON_ATM_DEBUG - -#ifdef AMAZON_TPE_TEST_AAL5_INT -/* - * Brief: Interrupt handler for AAL5 - * - * Parameters: irq - CPPN for this interrupt - * data - Device ID for this interrupt - * regs - Register file - * - */ -void amazon_atm_aal5_isr(int irq, void *data, struct pt_regs *regs) -{ - volatile u32 irq_stat=0; - - // Read interrupt status register - irq_stat = readl(AAL5_SISR0_ADDR); - if (irq_stat){ - AMAZON_TPE_EMSG("A5S status: %8x\n",irq_stat); - //Clear interrupt in CBM and ICU - AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT, AAL5_SSRC0_ADDR); - mask_and_ack_amazon_irq(AMAZON_AAL5_INT); - } - irq_stat = readl(AAL5_RISR0_ADDR); - if (irq_stat){ - AMAZON_TPE_EMSG("A5R status: %8x\n",irq_stat); - //Clear interrupt in CBM and ICU - AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT, AAL5_RSRC0_ADDR); - mask_and_ack_amazon_irq(AMAZON_AAL5_INT); - } -} -#endif //AMAZON_TPE_TEST_AAL5_INT - -/* - * Brief: Interrupt handler for CBM - * - * Parameters: irq - CPPN for this interrupt - * data - Device ID for this interrupt - * regs - Register file - * - * Description: - * This is the MIPS interrupt handler for the CBM. It processes incoming cells - * for SWIE queues. - */ -void amazon_atm_cbm_isr(int irq, void *data, struct pt_regs *regs) -{ - u32 irq_stat=0; - u8 qid=0; - - // Read interrupt status register - while ( (irq_stat = readl(CBM_INTINF0_ADDR))){ - AMAZON_TPE_DMSG("CBM INT status: %8x\n",irq_stat); - //Clear interrupt in CBM and ICU - AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_CBM_INT, CBM_SRC0_ADDR); - qid = (u8) ((irq_stat & CBM_INTINF0_QID_MASK)>>CBM_INTINF0_QID_SHIFT); -#ifdef AMAZON_TPE_SCR - if (irq_stat & CBM_INTINF0_EF){ - amazon_atm_a5r((void*)qid); - } -#endif - // Check if Any Cell Arrived - if (irq_stat & CBM_INTINF0_ACA) { - amazon_atm_swex((void *)irq_stat); - } - //TX AAL5 PDU discard - if (irq_stat & CBM_INTINF0_OPF){ - if ( (qid) < CBM_RX_OFFSET ){ - g_atm_dev.mib_counter.tx_drop++; - } - queue_statics(qid, QS_HW_DROP); - } - if (irq_stat & (CBM_INTINF0_ERR|CBM_INTINF0_Q0E|CBM_INTINF0_Q0I|CBM_INTINF0_RDE)){ - AMAZON_TPE_EMSG("CBM INT status: %8x\n",irq_stat); - if (irq_stat & CBM_INTINF0_ERR){ - AMAZON_TPE_EMSG("CBM Error: FPI Bus Error\n"); - } - if (irq_stat & CBM_INTINF0_Q0E){ - AMAZON_TPE_EMSG("CBM Error: Queue 0 Extract\n"); - } - if (irq_stat & CBM_INTINF0_Q0I){ - AMAZON_TPE_EMSG("CBM Error: Queue 0 Extract\n"); - } - if (irq_stat & CBM_INTINF0_RDE){ - AMAZON_TPE_EMSG("CBM Error: Read Empty Queue %u\n",qid); - dump_qd(qid); - } - } - } - mask_and_ack_amazon_irq(AMAZON_CBM_INT); -} - -/* Brief: check the status word after AAL SDU after reassembly - */ -static inline void check_aal5_error(u8 stw0, u8 stw1, int qid) -{ - if (stw0 & AAL5_STW0_MFL){ - AMAZON_TPE_DMSG("Maximum Frame Length\n"); - g_atm_dev.queues[qid].aal5VccOverSizedSDUs++; - } - if (stw0 & AAL5_STW0_CRC){ - AMAZON_TPE_DMSG("CRC\n"); - g_atm_dev.queues[qid].aal5VccCrcErrors++; - } -#ifdef AMAZON_ATM_DEBUG_RX - AMAZON_TPE_EMSG("qid:%u stw0:%8x stw1:%8x\n",qid,stw0,stw1); -#endif -} - -/* Brief: Process DMA rx data - * Parameters: - dma_dev: pointer to the dma_device_info, provided by us when register the dma device - * Return: no - * Description: DMA interrupt handerl with OoS support. It is called when there is some data in rx direction. - * - */ -//507261:tc.chen void atm_process_dma_rx(struct dma_device_info* dma_dev) -void __system atm_process_dma_rx(struct dma_device_info* dma_dev) -{ - u8 * head=NULL; - u32 length=0; - u8 stw0=0; - u8 stw1=0; - - struct sk_buff * skb=NULL; - struct atm_vcc * vcc=NULL; - int qid=0; -#ifdef AMAZON_ATM_DEBUG_RX - static int dma_rx_dump=0; - static u32 seq=0; - - seq++; - if (dma_rx_dump>0){ - printk("\n=========================[%u]=========================\n",seq); - } -#endif - length=dma_device_read(dma_dev,&head,(void**)&skb); - AMAZON_TPE_DMSG("receive %8p[%u] from DMA\n", head,length); - if (head == NULL||length<=0) { - AMAZON_TPE_DMSG("dma_read null \n"); - goto error_exit; - } - - if (length > (g_atm_dev.aal5.rx_max_sdu+64)){ - AMAZON_TPE_EMSG("received packet too large (%u)\n",length); - goto error_exit; - } - //check AAL5R trail for error and qid - //last byte is qid - length--; - qid = (int) head[length]; - AMAZON_TPE_DMSG("head[%u] qid %u\n",length, qid); - //STW0 is always 4 bytes before qid - length -= 4; - stw0 = head[length]&0xff; - AMAZON_TPE_DMSG("head[%u] stw0 %8x\n",length, stw0); - //position of STW1 depends on the BE bits - length = length-4 + (stw0&AAL5_STW0_BE); - stw1 = head[length]&0xff; - AMAZON_TPE_DMSG("head[%u] stw1 %8x\n",length, stw1); - if ( (stw0 & AAL5_STW0_MASK) || (stw1 & AAL5_STW1_MASK) ){ - //AAL5 Error - check_aal5_error(stw0, stw1,qid); - goto error_exit; - } - //make data pointers consistent - //UU + CPI - length -= 2; - AMAZON_TPE_DMSG("packet length %u\n", length); - - //error: cannot restore the qid - if (valid_qid(qid) != 1){ - AMAZON_TPE_EMSG("received frame in invalid qid %u!\n", qid); - goto error_exit; - } - vcc = g_atm_dev.queues[qid].vcc; - if (vcc == NULL){ - AMAZON_TPE_EMSG("received frame in invalid vcc, qid=%u!\n",qid); - goto error_exit; - } - if (skb == NULL){ - AMAZON_TPE_EMSG("cannot restore skb pointer!\n"); - goto error_exit; - } - skb_put(skb,length); - skb->stamp = xtime; - g_atm_dev.queues[qid].access_time=xtime; - if ((*g_atm_dev.queues[qid].push)(vcc,skb,0)){ - g_atm_dev.mib_counter.rx_drop++; - queue_statics(qid, QS_SW_DROP); - }else{ - g_atm_dev.mib_counter.rx++; - adsl_led_flash();//joelin adsl led - queue_statics(qid, QS_PKT); - AMAZON_TPE_DMSG("push successful!\n"); - } -#ifdef AMAZON_ATM_DEBUG_RX - if (dma_rx_dump>0){ - printk("\nOK packet [dump=%u] length=%u\n",dma_rx_dump,length); - dump_skb(length+7, head); - } - if (dma_rx_dump >0) dma_rx_dump--; -#endif - return ; -error_exit: -#ifdef AMAZON_ATM_DEBUG_RX - if ( (head!=NULL) && (length >0)){ - AMAZON_TPE_EMSG("length=%u\n",length); - dump_skb(length+5, head); - } - dma_rx_dump++; -#endif - g_atm_dev.mib_counter.rx_err++; - queue_statics(qid, QS_ERR); - /* - if (vcc){ - (*g_atm_dev.queues[qid].push)(vcc,skb,1); - } - */ - if (skb != NULL) { - dev_kfree_skb_any(skb); - } - return; -} - -/*Brief: ISR for DMA pseudo interrupt - *Parameter: - dma_dev: pointer to the dma_device_info, provided by us when register the dma device - intr_status: - RCV_INT: rx data available - TX_BUF_FULL_INT: tx descriptor run out of - TRANSMIT_CPT_INT: tx descriptor available again - *Return: - 0 for success??? - */ -//507261:tc.chen int amazon_atm_dma_handler(struct dma_device_info* dma_dev, int intr_status) -int __system amazon_atm_dma_handler(struct dma_device_info* dma_dev, int intr_status) -{ - AMAZON_TPE_DMSG("status:%u\n",intr_status); - switch (intr_status) { - case RCV_INT: - atm_process_dma_rx(dma_dev); - break; - case TX_BUF_FULL_INT: - //TX full: no descriptors - atm_dma_full(); - break; - case TRANSMIT_CPT_INT: - //TX free: at least one descriptor - atm_dma_free(); - break; - default: - AMAZON_TPE_EMSG("unknown status!\n"); - } - return 0; -} - -/*Brief: free buffer for DMA tx - *Parameter: - dataptr: pointers to data buffer - opt: optional parameter, used to convey struct skb pointer, passwd in dma_device_write - *Return: - 0 for success??? - *Description: - called by DMA module to release data buffer after DMA tx transaction - *Error: - cannot restore skb pointer - */ -int amazon_atm_free_tx(u8*dataptr, void* opt) -{ - struct sk_buff *skb; - if (opt){ - AMAZON_TPE_DMSG("free skb%8p\n",opt); - skb = (struct sk_buff *)opt; - amazon_atm_free_tx_skb(skb); - }else{ - AMAZON_TPE_EMSG("BUG: cannot restore skb pointer!\n"); - } - return 0; -} - -/*Brief: allocate buffer & do alignment - */ -inline struct sk_buff * amazon_atm_alloc_buffer(int len) -{ - struct sk_buff *skb; - skb = dev_alloc_skb(len+16); - if (skb){ - //alignment requriements (4x32 bits (16 bytes) boundary) - alloc_align_16(skb); - } - return skb; -} - -/*Brief: allocate buffer for DMA rx - *Parameter: - len: length - opt: optional data to convey the skb pointer, which will be returned to me in interrupt handler, - *Return: - pointer to buffer, NULL means error? - *Description: - must make sure byte alignment - */ - -u8* amazon_atm_alloc_rx(int len, int* offset, void **opt) -{ - struct sk_buff *skb; - *offset = 0; - skb = amazon_atm_alloc_buffer(len); - if (skb){ - AMAZON_TPE_DMSG("alloc skb->data:%8p len:%u\n",skb->data,len); - *(struct sk_buff**)opt = skb; - }else{ - AMAZON_TPE_DMSG("no memory for receiving atm frame!\n"); - return NULL; - } - return skb->data; -} - - - - -/* Brief: Allocate kernel memory for sending a datagram. - * Parameters - * vcc virtual connection - * size data buffer size - * Return: - * NULL fail - * sk_buff a pointer to a sk_buff - * Description: - * This function can allocate our own additional memory for AAL5S inbound - * header (8bytes). We have to replace the protocol default one (alloc_tx in /net/atm/common.c) - * when we open the device. - * byte alignment is done is DMA driver. - */ -struct sk_buff *amazon_atm_alloc_tx(struct atm_vcc *vcc,unsigned int size) -{ - struct sk_buff *skb; - - if (!dma_may_send(DMA_TX_CH0)){ - AMAZON_TPE_EMSG("no DMA descriptor available!\n"); - return NULL; - } - //AAL5 inbound header space + alignment extra buffer - size+=8+AAL5S_INBOUND_HEADER; - - if (atomic_read(&vcc->tx_inuse) && !atm_may_send(vcc,size)) { - AMAZON_TPE_EMSG("Sorry tx_inuse = %u, size = %u, sndbuf = %u\n", - atomic_read(&vcc->tx_inuse),size,vcc->sk->sndbuf); - return NULL; - } - - skb = amazon_atm_alloc_buffer(size); - if (skb == NULL){ - AMAZON_TPE_EMSG("no memory\n"); - return NULL; - } - AMAZON_TPE_DMSG("dev_alloc_skb(%u) = %x\n", skb->len, (u32)skb); - AMAZON_TPE_DMSG("tx_inuse %u += %u\n",atomic_read(&vcc->tx_inuse),skb->truesize); - atomic_add(skb->truesize+ATM_PDU_OVHD,&vcc->tx_inuse); - - //reserve for AAL5 inbound header - skb_reserve(skb,AAL5S_INBOUND_HEADER); - return skb; -} - - -/* Brief: change per queue QSB setting according to vcc qos parameters - * Paramters: - * vcc: atm_vcc pointer - * qid: CBM queue id (1~15) - * Return: - */ -static inline void set_qsb(struct atm_vcc *vcc, struct atm_qos *qos, int qid) -{ - qsb_qptl_t qptl; - qsb_qvpt_t qvpt; - u32 tmp=0; - unsigned int qsb_clk; - - qsb_clk = amazon_get_fpi_hz()>>1; - - AMAZON_TPE_EMSG("Class=%u MAX_PCR=%u PCR=%u MIN_PCR=%u SCR=%u MBS=%u CDV=%u\n" - ,qos->txtp.traffic_class - ,qos->txtp.max_pcr - ,qos->txtp.pcr - ,qos->txtp.min_pcr - ,qos->txtp.scr - ,qos->txtp.mbs - ,qos->txtp.cdv - ); - - // PCR limiter - if (qos->txtp.max_pcr == 0){ - qptl.bit.tprs = 0; /* 0 disables the PCR limiter */ - }else { - // peak cell rate will be slightly lower than requested (maximum rate / pcr)= (qsbclock/2^3 * timestep/4)/pcr - tmp = (( (qsb_clk * g_atm_dev.qsb.tstepc)>>5)/ qos->txtp.max_pcr ) + 1; - // check if an overfow occured - if (tmp > QSB_TP_TS_MAX) { - AMAZON_TPE_EMSG("max_pcr is too small, max_pcr:%u tprs:%u\n",qos->txtp.max_pcr, tmp); - qptl.bit.tprs = QSB_TP_TS_MAX; - }else{ - qptl.bit.tprs = tmp; - } - } - //WFQ - if (qos->txtp.traffic_class == ATM_CBR || qos->txtp.traffic_class ==ATM_VBR_RT){ - // real time queue gets weighted fair queueing bypass - qptl.bit.twfq = 0; - }else if (qos->txtp.traffic_class ==ATM_VBR_NRT ||qos->txtp.traffic_class ==ATM_UBR_PLUS ){ - // wfq calculation here are based on virtual cell rates, to reduce granularity for large rates - // wfq factor is maximum cell rate / garenteed cell rate. - //qptl.bit.twfq = g_atm_dev.qsb.min_cr * QSB_WFQ_NONUBR_MAX / qos->txtp.min_pcr; - if (qos->txtp.min_pcr == 0) { - AMAZON_TPE_EMSG("<warning> MIN_PCR should not be zero\n"); - qptl.bit.twfq = QSB_WFQ_NONUBR_MAX; - }else{ - tmp = QSB_GCR_MIN * QSB_WFQ_NONUBR_MAX / qos->txtp.min_pcr; - if (tmp == 0 ){ - qptl.bit.twfq = 1; - }else if (tmp > QSB_WFQ_NONUBR_MAX){ - AMAZON_TPE_EMSG("min_pcr is too small, min_pcr:%u twfq:%u\n",qos->txtp.min_pcr, tmp); - qptl.bit.twfq = QSB_WFQ_NONUBR_MAX; - }else{ - qptl.bit.twfq = tmp; - } - } - }else if (qos->txtp.traffic_class == ATM_UBR){ - // ubr bypass, twfq set to maximum value - qptl.bit.twfq = QSB_WFQ_UBR_BYPASS; - }else{ - //tx is diabled, treated as UBR - AMAZON_TPE_EMSG("<warning> unsupported traffic class %u \n", qos->txtp.traffic_class); - qos->txtp.traffic_class = ATM_UBR; - qptl.bit.twfq = QSB_WFQ_UBR_BYPASS; - } - - //SCR Leaky Bucket Shaper VBR.0/VBR.1 - if (qos->txtp.traffic_class ==ATM_VBR_RT || qos->txtp.traffic_class ==ATM_VBR_NRT){ - if (qos->txtp.scr == 0){ - //SCR == 0 disable the shaper - qvpt.bit.ts = 0; - qvpt.bit.taus = 0; - }else{ - //CLP - if (vcc->atm_options&ATM_ATMOPT_CLP){ - //CLP1 - qptl.bit.vbr = 1; - }else{ - //CLP0 - qptl.bit.vbr = 0; - } - //TS and TauS - tmp = (( (qsb_clk * g_atm_dev.qsb.tstepc)>>5)/ qos->txtp.scr ) + 1; - if (tmp > QSB_TP_TS_MAX) { - AMAZON_TPE_EMSG("scr is too small, scr:%u ts:%u\n",qos->txtp.scr, tmp); - qvpt.bit.ts = QSB_TP_TS_MAX; - }else{ - qvpt.bit.ts = tmp; - } - tmp = (qos->txtp.mbs - 1)*(qvpt.bit.ts - qptl.bit.tprs)/64; - if (tmp > QSB_TAUS_MAX){ - AMAZON_TPE_EMSG("mbs is too large, mbr:%u taus:%u\n",qos->txtp.mbs, tmp); - qvpt.bit.taus = QSB_TAUS_MAX; - }else if (tmp == 0){ - qvpt.bit.taus = 1; - }else{ - qvpt.bit.taus = tmp; - } - } - }else{ - qvpt.w0 = 0; - } - //write the QSB Queue Parameter Table (QPT) - AMAZON_WRITE_REGISTER_L(QSB_QPT_SET_MASK,QSB_RTM_ADDR); - AMAZON_WRITE_REGISTER_L(qptl.w0, QSB_RTD_ADDR); - AMAZON_WRITE_REGISTER_L((QSB_TABLESEL_QPT<<QSB_TABLESEL_SHIFT) - | QSB_RAMAC_REG_LOW - | QSB_WRITE - | qid - ,QSB_RAMAC_ADDR); - //write the QSB Queue VBR Parameter Table (QVPT) - AMAZON_WRITE_REGISTER_L(QSB_QVPT_SET_MASK,QSB_RTM_ADDR); - AMAZON_WRITE_REGISTER_L(qvpt.w0, QSB_RTD_ADDR); - AMAZON_WRITE_REGISTER_L((QSB_TABLESEL_QVPT<<QSB_TABLESEL_SHIFT) - | QSB_RAMAC_REG_LOW - | QSB_WRITE - | qid - ,QSB_RAMAC_ADDR); - AMAZON_TPE_EMSG("tprs:%u twfq:%u ts:%u taus:%u\n",qptl.bit.tprs,qptl.bit.twfq,qvpt.bit.ts,qvpt.bit.taus); -} - -/* - * Brief: create/change CBM queue descriptor - * Parameter: - * vcc: atm_vcc pointer - * qid: CBM queue id (1~15) - */ -static inline void set_qd(struct atm_vcc *vcc, u32 qid) -{ - u32 tx_config=0,rx_config=0; - u32 itf = (u32) vcc->itf; - u32 dma_qos=0; - u8 * qd_addr=NULL; - - tx_config|=CBM_QD_W3_WM_EN|CBM_QD_W3_CLPt; - //RT: check if the connection is a real time connection - if (vcc->qos.txtp.traffic_class == ATM_CBR || vcc->qos.txtp.traffic_class == ATM_VBR_RT){ - tx_config|= CBM_QD_W3_RT; - }else{ - tx_config|= CBM_QD_W3_AAL5; //don't set the AAL5 flag if it is a RT service - } - rx_config = tx_config; - - if(vcc->qos.aal == ATM_AAL5){ - //QoS: DMA QoS according to the traffic class - switch (vcc->qos.txtp.traffic_class){ - case ATM_CBR: dma_qos = CBR_DMA_QOS;break; - case ATM_VBR_RT: dma_qos = VBR_RT_DMA_QOS;break; - case ATM_VBR_NRT: dma_qos = VBR_NRT_DMA_QOS;break; - case ATM_UBR_PLUS: dma_qos = UBR_PLUS_DMA_QOS;break; - case ATM_UBR: dma_qos = UBR_DMA_QOS;break; - } - - //TX: upstream, AAL5(EPD or PPD), NOINT, SBid - tx_config |= CBM_QD_W3_DIR_UP|CBM_QD_W3_INT_NOINT|(itf&CBM_QD_W3_SBID_MASK); - //RX: DMA QoS, downstream, no interrupt, AAL5(EPD, PPD), NO INT, HCR -#ifdef AMAZON_TPE_SCR - rx_config |= dma_qos|CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_EOF; -#else - rx_config |= dma_qos|CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_NOINT|CBM_QD_W3_HCR; -#endif - }else { - //should be AAL0 - //upstream, NOINT, SBid - tx_config |= CBM_QD_W3_DIR_UP|CBM_QD_W3_INT_NOINT|(itf&CBM_QD_W3_SBID_MASK); - //RX: downstream, ACA interrupt, - rx_config |= CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_ACA; - } - - //Threshold: maximum threshold for tx/rx queue, which is adjustable in steps of 64 cells - tx_config |= ( (divide_by_64_round_up(tx_q_threshold)&0xffff)<<CBM_QD_W3_THRESHOLD_SHIFT) & CBM_QD_W3_THRESHOLD_MASK; - rx_config |= ( (divide_by_64_round_up(rx_q_threshold)&0xffff)<<CBM_QD_W3_THRESHOLD_SHIFT) & CBM_QD_W3_THRESHOLD_MASK; - - qd_addr = (u8*) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr); - //TX - AMAZON_WRITE_REGISTER_L(tx_config, (qd_addr+qid*CBM_QD_SIZE + 0xc)); - AMAZON_WRITE_REGISTER_L(0, (qd_addr+qid*CBM_QD_SIZE + 0x8)); - //RX - AMAZON_WRITE_REGISTER_L(rx_config, (qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE + 0xc)); - AMAZON_WRITE_REGISTER_L(0, (qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE + 0x8)); -} -/* - * Brief: add HTU table entry - * Parameter: - * vpi.vci: - * qid: CBM queue id (DEST is qid + CBM_RX_OFFSET) - * idx: entry id (starting from zero to 14) - * Return: - * 0: sucessful - * EIO: HTU table entry cannot be written - */ - -inline int set_htu_entry(u8 vpi, u16 vci, u8 qid, u8 idx) -{ - int i = 0; - u32 tmp1=0; - while ((tmp1 = readl(HTU_RAMSTAT_ADDR))!=0 && i < 1024) i++; - if (i > 1024) - { - AMAZON_TPE_EMSG("timeout\n"); - return -EIO; - } - // write address register, - AMAZON_WRITE_REGISTER_L(idx, HTU_RAMADDR_ADDR); - // configure transmit queue - tmp1 = vpi<<24|vci<<8; - tmp1|= HTU_RAMDAT1_VCON // valid connection the entry is not validated here !!!!!!!!!!!!!!!! - |HTU_RAMDAT1_VCI3 // vci3 -> oam queue - |HTU_RAMDAT1_VCI4 // vci4 -> oam queue - |HTU_RAMDAT1_VCI6 // vci6 -> rm queue - |HTU_RAMDAT1_PTI4 // pti4 -> oam queue - |HTU_RAMDAT1_PTI5; // pti5 -> oam queue - - // ramdat 1 (in params & oam handling) - AMAZON_WRITE_REGISTER_L( tmp1, HTU_RAMDAT1_ADDR); - // ramdat 2 (out params & oam handling) - tmp1 = ((qid+CBM_RX_OFFSET)&HTU_RAMDAT2_QID_MASK) - |HTU_RAMDAT2_PTI6 - |HTU_RAMDAT2_PTI7 - |HTU_RAMDAT2_F4U - |HTU_RAMDAT2_F5U - ; - AMAZON_WRITE_REGISTER_L( tmp1, HTU_RAMDAT2_ADDR); - wmb(); - // write HTU entry - AMAZON_WRITE_REGISTER_L(HTU_RAMCMD_WR, HTU_RAMCMD_ADDR); - return 0; -} -/* - * Brief: add HTU table entry - * Parameter: - * vcc: atm_vcc pointer - * qid: CBM queue id - * Return: - * 0: sucessful - * EIO: HTU table entry cannot be written - */ -inline static int set_htu(struct atm_vcc *vcc, u32 qid) -{ - return set_htu_entry(vcc->vpi, vcc->vci, qid, (qid - CBM_DEFAULT_Q_OFFSET)); -} - -/* - * Brief: allocate a queue - * Return: - * <=0 no available queues - * >0 qid - */ -static int atm_allocate_q(short itf) -{ - int i; - u32 tmp1=0; - int qid=0; - amazon_atm_port_t * dev; - dev = &g_atm_dev.ports[itf]; - //find start queue id for this interface - for (i=0; i< itf; i++) - { - qid+= g_atm_dev.ports[i].max_conn; - } - // apply default queue offset ( oam, free cell queue, others, rm ) - qid += CBM_DEFAULT_Q_OFFSET; - tmp1 = qid; - // search for a free queue - while ( (qid<tmp1+dev->max_conn) - && ( g_atm_dev.queues[qid].free != 1)) { - qid++;; - } - // if none was found, send failure message and return - if ( tmp1+dev->max_conn == qid) - { - return -EFAULT; - } - return qid; - -} -/* Brief: open a aal5 or aal0 connection - */ -static int atm_open(struct atm_vcc *vcc, push_back_t push) -{ - int err=0; - int qid=0; - amazon_atm_port_t * port = & g_atm_dev.ports[vcc->itf]; - unsigned long flags; - /***************** check bandwidth ******************/ - /* 511045:linmars change ATM_VBR_NRT to use scr instead of pcr */ - if ((vcc->qos.txtp.traffic_class==ATM_CBR&&vcc->qos.txtp.max_pcr>port->tx_rem_cr) - ||(vcc->qos.txtp.traffic_class==ATM_VBR_RT&&vcc->qos.txtp.max_pcr>port->tx_rem_cr) - ||(vcc->qos.txtp.traffic_class==ATM_VBR_NRT&&vcc->qos.txtp.scr>port->tx_rem_cr) - ||(vcc->qos.txtp.traffic_class==ATM_UBR_PLUS&&vcc->qos.txtp.min_pcr>port->tx_rem_cr) - ) { - AMAZON_TPE_EMSG("not enough bandwidth left (%u) cells per seconds \n",port->tx_rem_cr); - return -EINVAL; - } - if ( (qid = amazon_atm_find_vpivci(vcc->vpi, vcc->vci)) >0 ){ - AMAZON_TPE_EMSG("vpi:%u vci:%u is alreay open on queue:%u\n", vcc->vpi, vcc->vci, qid); - return -EADDRINUSE; - } - - /***************** allocate entry queueID for this port *****************/ - if ( (qid=atm_allocate_q(vcc->itf)) <= 0){ - AMAZON_TPE_EMSG("port: %u max:%u qid: %u\n", vcc->itf, port->max_conn, qid); - AMAZON_TPE_EMSG("no availabel connections for this port:%u\n",vcc->itf); - return -EINVAL; - } - /**************QSB parameters and CBM descriptors*************/ - set_qsb(vcc, &vcc->qos, qid); - set_qd(vcc, qid); - mb(); - err=set_htu(vcc,qid); - if (err){ - AMAZON_TPE_EMSG("set htu entry fails %u\n",err); - return err; - } - /************set internal mapping*************/ - local_irq_save(flags); - g_atm_dev.queues[qid].free = 0; - g_atm_dev.queues[qid].vcc = vcc; - g_atm_dev.queues[qid].push = push; - g_atm_dev.queues[qid+CBM_RX_OFFSET].free = 0; - g_atm_dev.queues[qid+CBM_RX_OFFSET].vcc = vcc; - g_atm_dev.queues[qid+CBM_RX_OFFSET].push = push; - /******************reserve bandwidth**********************/ - if (vcc->qos.txtp.traffic_class == ATM_CBR){ - //CBR, real time connection, reserve PCR - port->tx_cur_cr += vcc->qos.txtp.max_pcr; - port->tx_rem_cr -= vcc->qos.txtp.max_pcr; - }else if (vcc->qos.txtp.traffic_class == ATM_VBR_RT){ - //VBR_RT, real time connection, reserve PCR - port->tx_cur_cr += vcc->qos.txtp.max_pcr; - port->tx_rem_cr -= vcc->qos.txtp.max_pcr; - }else if (vcc->qos.txtp.traffic_class == ATM_VBR_NRT){ - //VBR_NRT, reserve SCR - port->tx_cur_cr += vcc->qos.txtp.pcr; - port->tx_rem_cr -= vcc->qos.txtp.pcr; - }else if (vcc->qos.txtp.traffic_class == ATM_UBR_PLUS){ - //UBR_PLUS, reserve MCR - port->tx_cur_cr += vcc->qos.txtp.min_pcr; - port->tx_rem_cr -= vcc->qos.txtp.min_pcr; - } - local_irq_restore(flags); - return err; -} -/* Brief: Open ATM connection - * Parameters: atm_vcc - Pointer to VCC data structure - * vpi - VPI value for new connection - * vci - VCI value for new connection - * - * Return: 0 - sucessful - * -ENOMEM - No memory available - * -EINVAL - No bandwidth/queue/ or unsupported AAL type - * Description: - * This function opens an ATM connection on a specific device/interface - * - */ -int amazon_atm_open(struct atm_vcc *vcc,push_back_t push) -{ - int err=0; - - AMAZON_TPE_DMSG("vpi %u vci %u itf %u aal %u\n" - ,vcc->vpi - ,vcc->vci - ,vcc->itf - ,vcc->qos.aal - ); - - AMAZON_TPE_DMSG("tx cl %u bw %u mtu %u\n" - ,vcc->qos.txtp.traffic_class - ,vcc->qos.txtp.max_pcr - ,vcc->qos.txtp.max_sdu - ); - AMAZON_TPE_DMSG("rx cl %u bw %u mtu %u\n" - ,vcc->qos.rxtp.traffic_class - ,vcc->qos.rxtp.max_pcr - ,vcc->qos.rxtp.max_sdu - ); - if (vcc->qos.aal == ATM_AAL5 || vcc->qos.aal == ATM_AAL0){ - err = atm_open(vcc,push); - }else{ - AMAZON_TPE_EMSG("unsupported aal type %u\n", vcc->qos.aal); - err = -EPROTONOSUPPORT; - }; - if (err == 0 ){ - //replace the default memory allocation function with our own - vcc->alloc_tx = amazon_atm_alloc_tx; - set_bit(ATM_VF_READY,&vcc->flags); - } - return err; -} - -/* Brief: Send ATM OAM cell - * Parameters: atm_vcc - Pointer to VCC data structure - * skb - Pointer to sk_buff structure, that contains the data - * Return: 0 - sucessful - * -ENOMEM - No memory available - * -EINVAL - Not supported - * Description: - * This function sends a cell over and ATM connection - * We always release the skb - * TODO: flags handling (ATM_OF_IMMED, ATM_OF_INRATE) - */ -int amazon_atm_send_oam(struct atm_vcc *vcc, void * cell, int flags) -{ - int err=0; - int qid=0; - struct amazon_atm_cell_header * cell_header; - // Get cell header - cell_header = (struct amazon_atm_cell_header*) cell; - if ((cell_header->bit.pti == ATM_PTI_SEGF5) || (cell_header->bit.pti == ATM_PTI_E2EF5)) { - qid = amazon_atm_find_vpivci( cell_header->bit.vpi, cell_header->bit.vci); - }else if (cell_header->bit.vci == 0x3 || cell_header->bit.vci == 0x4) { - //507281:tc.chen qid = amazon_atm_find_vpi((int) cell_header->bit.vpi); - // 507281:tc.chen start - u8 f4_vpi; - f4_vpi = cell_header->bit.vpi; - qid = amazon_atm_find_vpi(f4_vpi ); - // 507281:tc.chen end - }else{ - //non-OAM cells, always invalid - qid = -EINVAL; - } - if (qid == -EINVAL) { - err = -EINVAL; - AMAZON_TPE_EMSG("not valid AAL0 packet\n"); - }else{ - //send the cell using swie -#ifdef TPE_LOOPBACK - err = amazon_atm_swin(AMAZON_ATM_OAM_Q_ID, cell); -#else - err = amazon_atm_swin(qid, cell); -#endif - } - //kfree(cell); - return err; -} - -/* Brief: Send AAL5 frame through DMA - * Parameters: vpi - virtual path id - * vci - virtual circuit id - * clp - cell loss priority - * qid - CBM queue to be sent to - * skb - packet to be sent - * Return: 0 - sucessful - * -ENOMEM - No memory available - * -EINVAL - Not supported - * Description: - * This function sends a AAL5 frame over and ATM connection - * 1. make sure that the data is aligned to 4x32-bit boundary - * 2. provide the inbound data (CPCS-UU and CPI, not used here) - * 3. set CLPn - * 4. send the frame by DMA - * 5. release the buffer ??? - ** use our own allocation alloc_tx - ** we make sure the alignment and additional memory - *** we always release the skb - - */ -int amazon_atm_dma_tx(u8 vpi, u16 vci, u8 clp, u8 qid, struct sk_buff *skb) -{ - int err=0,need_pop=1; - u32 * data=NULL; - int nwrite=0; - struct sk_buff *skb_tmp; - u32 len=skb->len; - - //AAL5S inbound header 8 bytes - if (skb->len > g_atm_dev.aal5.tx_max_sdu - AAL5S_INBOUND_HEADER) { - AMAZON_TPE_DMSG("tx_max_sdu:%u\n",g_atm_dev.aal5.tx_max_sdu); - AMAZON_TPE_DMSG("skb too large [%u]!\n",skb->len); - err = -EMSGSIZE; - goto atm_dma_tx_error_exit; - } - - //Check the byte alignment requirement and header space - if ( ( ((u32)(skb->data)%16) !=AAL5S_INBOUND_HEADER)|| (skb_headroom(skb)<AAL5S_INBOUND_HEADER)){ - //not aligned or no space for header, fall back to memcpy - skb_tmp = dev_alloc_skb(skb->len+16); - if (skb_tmp==NULL){ - err = - ENOMEM; - goto atm_dma_tx_error_exit; - } - alloc_align_16(skb_tmp); - g_atm_dev.aal5.cnt_cpy++; - skb_reserve(skb_tmp,AAL5S_INBOUND_HEADER); - memcpy(skb_put(skb_tmp,skb->len), skb->data, skb->len); - amazon_atm_free_tx_skb(skb); - need_pop=0; - skb = skb_tmp; - } - //Provide AAL5S inbound header - data = (u32 *)skb_push(skb,8); - data[0] = __be32_to_cpu(vpi<<20|vci<<4|clp); - data[1] = __be32_to_cpu(g_atm_dev.aal5.padding_byte<<8|qid); - - len = skb->len; - - //send through DMA - AMAZON_TPE_DMSG("AAL5S header 0 %8x\n", data[0]); - AMAZON_TPE_DMSG("AAL5S header 0 %8x\n", data[1]); - AMAZON_TPE_DMSG("about to call dma_write len: %u\n", len); - nwrite=dma_device_write( &g_dma_dev,skb->data,len,skb); - if (nwrite != len) { - //DMA descriptors full -// AMAZON_TPE_EMSG("AAL5 packet drop due to DMA nwrite:%u skb->len:%u\n", nwrite,len); - AMAZON_TPE_DMSG("AAL5 packet drop due to DMA nwrite:%u skb->len:%u\n", nwrite,len); - err = -EAGAIN; - goto atm_dma_tx_drop_exit; - } - AMAZON_TPE_DMSG("just finish call dma_write\n"); - //release in the "dma done" call-back - return 0; -atm_dma_tx_error_exit: - g_atm_dev.mib_counter.tx_err++; - queue_statics(qid, QS_ERR); - goto atm_dma_tx_exit; - -atm_dma_tx_drop_exit: - g_atm_dev.mib_counter.tx_drop++; - queue_statics(qid, QS_SW_DROP); -atm_dma_tx_exit: - if (need_pop){ - amazon_atm_free_tx_skb(skb); - }else{ - dev_kfree_skb_any(skb); - } - return err; -} - -/* Brief: Send AAL0/AAL5 packet - * Parameters: atm_vcc - Pointer to VCC data structure - * skb - Pointer to sk_buff structure, that contains the data - * Return: 0 - sucessful - * -ENOMEM - No memory available - * -EINVAL - Not supported - * Description: - * See amazon_atm_dma_tx - */ -int amazon_atm_send(struct atm_vcc *vcc,struct sk_buff *skb) -{ - int qid=0; - u8 clp=0; - int err=0; - u32 wm=0; - - if (vcc == NULL || skb == NULL){ - AMAZON_TPE_EMSG("invalid parameter\n"); - return -EINVAL; - } - ATM_SKB(skb)->vcc = vcc; - qid = amazon_atm_get_queue(vcc); - if (valid_qid(qid) != 1) { - AMAZON_TPE_EMSG("invalid vcc!\n"); - err = -EINVAL; - goto atm_send_err_exit; - } - - //Send AAL0 using SWIN - if (vcc->qos.aal == ATM_AAL0){ -#ifdef TPE_LOOPBACK - err=amazon_atm_swin((qid+CBM_RX_OFFSET), skb->data); -#else - err=amazon_atm_swin(qid, skb->data); -#endif - if (err){ - goto atm_send_err_exit; - } - goto atm_send_exit; - } - - //Should be AAl5 - //MIB counter - g_atm_dev.mib_counter.tx++; - adsl_led_flash();//joelin adsl led - queue_statics(qid, QS_PKT); - -#ifdef AMAZON_CHECK_LINK - //check adsl link - if (adsl_link_status == 0){ - //link down - AMAZON_TPE_DMSG("ADSL link down, discarded!\n"); - err=-EFAULT; - goto atm_send_drop_exit; - } -#endif - clp = (vcc->atm_options&ATM_ATMOPT_CLP)?1:0; - //check watermark first - wm = readl(CBM_WMSTAT0_ADDR); - if ( (wm & (1<<qid)) - ||( (vcc->qos.txtp.traffic_class != ATM_CBR - &&vcc->qos.txtp.traffic_class != ATM_VBR_RT) - &(wm & (CBM_WM_NRT_MASK | (clp&CBM_WM_CLP1_MASK)) ))){ - //wm hit: discard - AMAZON_TPE_DMSG("watermark hit, discarded!\n"); - err=-EFAULT; - goto atm_send_drop_exit; - } -#ifdef TPE_LOOPBACK - return amazon_atm_dma_tx(vcc->vpi, vcc->vci,clp, (qid+CBM_RX_OFFSET),skb); -#else - return amazon_atm_dma_tx(vcc->vpi, vcc->vci,clp, qid,skb); -#endif - -atm_send_exit: - amazon_atm_free_tx_skb_vcc(vcc,skb); - return 0; - -atm_send_drop_exit: - g_atm_dev.mib_counter.tx_drop++; - queue_statics(qid,QS_SW_DROP); -atm_send_err_exit: - amazon_atm_free_tx_skb_vcc(vcc,skb); - return err; -} - -/* Brief: Return ATM port related MIB - * Parameter: interface number - atm_cell_ifEntry_t - */ -int amazon_atm_cell_mib(atm_cell_ifEntry_t* to,u32 itf) -{ - g_atm_dev.mib_counter.htu_unp += readl(HTU_MIBCIUP); - to->ifInUnknownProtos = g_atm_dev.mib_counter.htu_unp; -#ifdef AMAZON_TPE_READ_ARC - u32 reg_val=0; - meiDebugRead((AR_CELL0_ADDR+itf*4),®_val,1); - g_atm_dev.mib_counter.rx_cells += reg_val; - reg_val=0; - meiDebugWrite((AR_CELL0_ADDR+itf*4),®_val,1); - to->ifHCInOctets_h = (g_atm_dev.mib_counter.rx_cells * 53)>>32; - to->ifHCInOctets_l = (g_atm_dev.mib_counter.rx_cells * 53) & 0xffff; - - meiDebugRead((AT_CELL0_ADDR+itf*4),®_val,1); - g_atm_dev.mib_counter.tx_cells += reg_val; - reg_val=0; - meiDebugWrite((AT_CELL0_ADDR+itf*4),®_val,1); - to->ifHCOutOctets_h = (g_atm_dev.mib_counter.tx_cells * 53)>>32; - to->ifHCOutOctets_l = (g_atm_dev.mib_counter.rx_cells * 53) & 0xffff; - - meiDebugRead((AR_CD_CNT0_ADDR+itf*4),®_val,1); - g_atm_dev.mib_counter.rx_err_cells += reg_val; - reg_val=0; - meiDebugWrite((AR_CD_CNT0_ADDR+itf*4),®_val,1); - to->ifInErrors = g_atm_dev.mib_counter.rx_err_cells; - - to->ifOutErrors = 0; -#else - to->ifHCInOctets_h = 0; - to->ifHCInOctets_l = 0; - to->ifHCOutOctets_h = 0; - to->ifHCOutOctets_l = 0; - to->ifInErrors = 0; - to->ifOutErrors = 0; -#endif - return 0; -} - -/* Brief: Return ATM AAL5 related MIB - * Parameter: - atm_aal5_ifEntry_t - */ -int amazon_atm_aal5_mib(atm_aal5_ifEntry_t* to) -{ - u32 reg_l,reg_h; - //AAL5R received Octets from ATM - reg_l = readl(AAL5_RIOL_ADDR); - reg_h = readl(AAL5_RIOM_ADDR); - g_atm_dev.mib_counter.rx_cnt_h +=reg_h; - if (reg_l + g_atm_dev.mib_counter.rx_cnt_l < reg_l){ - g_atm_dev.mib_counter.rx_cnt_h++; - } - - g_atm_dev.mib_counter.rx_cnt_l+= reg_l; - //AAL5S sent Octets to ATM - reg_l = readl(AAL5_SOOL_ADDR); - reg_h = readl(AAL5_SOOM_ADDR); - g_atm_dev.mib_counter.tx_cnt_h +=reg_h; - if (reg_l + g_atm_dev.mib_counter.tx_cnt_l < reg_l){ - g_atm_dev.mib_counter.tx_cnt_h++; - } - g_atm_dev.mib_counter.tx_cnt_l+= reg_l; - - - g_atm_dev.mib_counter.tx_ppd += readl(CBM_AAL5ODIS_ADDR); - g_atm_dev.mib_counter.rx_drop += readl(CBM_AAL5IDIS_ADDR); - - //store - to->ifHCInOctets_h = g_atm_dev.mib_counter.rx_cnt_h; - to->ifHCInOctets_l = g_atm_dev.mib_counter.rx_cnt_l; - to->ifHCOutOctets_h = g_atm_dev.mib_counter.tx_cnt_h; - to->ifHCOutOctets_l = g_atm_dev.mib_counter.tx_cnt_l; - to->ifOutDiscards = g_atm_dev.mib_counter.tx_drop; - to->ifInDiscards = g_atm_dev.mib_counter.rx_drop; - - //Software provided counters - //packets passed to higher layer - to->ifInUcastPkts = g_atm_dev.mib_counter.rx; - //packets passed from higher layer - to->ifOutUcastPkts = g_atm_dev.mib_counter.tx; - //number of wrong downstream packets - to->ifInErrors = g_atm_dev.mib_counter.rx_err; - //number of wrong upstream packets - to->ifOutErros = g_atm_dev.mib_counter.tx_err; - - return 0; -} -/* Brief: Return ATM AAL5 VCC related MIB from internale use - * Parameter: - * qid - * atm_aal5_vcc_t - */ -static int __amazon_atm_vcc_mib(int qid, atm_aal5_vcc_t* to) -{ - //aal5VccCrcErrors - to->aal5VccCrcErrors = g_atm_dev.queues[qid].aal5VccCrcErrors; - to->aal5VccOverSizedSDUs =g_atm_dev.queues[qid].aal5VccOverSizedSDUs; - to->aal5VccSarTimeOuts = 0; //not supported yet - return 0; -} -/* Brief: Return ATM AAL5 VCC related MIB from vpi/vci - * Parameter: atm_vcc - * atm_aal5_vcc_t - */ -int amazon_atm_vcc_mib_x(int vpi, int vci,atm_aal5_vcc_t* to) -{ - int qid=0; - int err=0; - qid = amazon_atm_find_vpivci(vpi, vci); - if (qid >0 ){ - err = __amazon_atm_vcc_mib(qid,to); - }else{ - return -EINVAL; - } - return err; -} - - -/* Brief: Return ATM AAL5 VCC related MIB - * Parameter: atm_vcc - * atm_aal5_vcc_t - */ -int amazon_atm_vcc_mib(struct atm_vcc *vcc,atm_aal5_vcc_t* to) -{ - int qid=0; - int err=0; - qid = amazon_atm_get_queue(vcc); - if (qid >0 ){ - err = __amazon_atm_vcc_mib(qid,to); - }else{ - return -EINVAL; - } - return err; -} - -/* Brief: Close ATM connection - * Parameters: atm_vcc - Pointer to VCC data structure - * Return: no - * Description: - * This function closes the given ATM connection - */ -void amazon_atm_close(struct atm_vcc *vcc){ - int i; - int qid=0; - u32 tmp1; - u8 * qd_addr; - unsigned long flags; - if (vcc == NULL){ - AMAZON_TPE_EMSG("invalid parameter. vcc is null\n"); - return; - } - u32 itf = (u32) vcc->itf; - //release bandwidth - if (vcc->qos.txtp.traffic_class == ATM_CBR){ - g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.max_pcr; - g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.max_pcr; - }else if (vcc->qos.txtp.traffic_class == ATM_VBR_RT){ - g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.max_pcr; - g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.max_pcr; - }else if (vcc->qos.txtp.traffic_class == ATM_VBR_NRT){ - g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.pcr; - g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.pcr; - }else if (vcc->qos.txtp.traffic_class == ATM_UBR_PLUS){ - g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.min_pcr; - g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.min_pcr; - } - - qid = amazon_atm_get_queue(vcc); - if (qid == -EINVAL){ - AMAZON_TPE_EMSG("unknown vcc %u.%u.%u\n", vcc->itf, vcc->vpi, vcc->vci); - return; - } - local_irq_save(flags); - //Disable HTU entry - i=0; - while ((tmp1 = readl(HTU_RAMSTAT_ADDR))!=0 && i < HTU_RAM_ACCESS_MAX) i++; - if (i == HTU_RAM_ACCESS_MAX){ - AMAZON_TPE_EMSG("HTU RAM ACCESS out of time\n"); - } - - // write address register - AMAZON_WRITE_REGISTER_L(qid - CBM_DEFAULT_Q_OFFSET, HTU_RAMADDR_ADDR); - // invalidate the connection - AMAZON_WRITE_REGISTER_L(0, HTU_RAMDAT1_ADDR); - // write command - AMAZON_WRITE_REGISTER_L(HTU_RAMCMD_WR,HTU_RAMCMD_ADDR); - - qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr); -#ifdef AMAZON_ATM_DEBUG - tmp1 = readl(qd_addr+qid*CBM_QD_SIZE+0x8) & 0xffff; - AMAZON_TPE_DMSG("TX queue has %u cells \n", tmp1); - tmp1 = readl( qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x08)&0xffff; - AMAZON_TPE_DMSG("RX queue has %u cells \n", tmp1); -#endif - // set threshold of txqueue to 0 - tmp1 = readl(qd_addr+qid*CBM_QD_SIZE+0x0c); - tmp1&= (~ CBM_QD_W3_THRESHOLD_MASK); - AMAZON_WRITE_REGISTER_L(tmp1, (qd_addr+qid*CBM_QD_SIZE+0x0c)); - // set threshold of rxqueue to 0 - tmp1 = readl( qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x0c); - tmp1&= (~ CBM_QD_W3_THRESHOLD_MASK); - AMAZON_WRITE_REGISTER_L(tmp1,(qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x0c)); - - //clear internal mapping - amazon_atm_clear_vcc(qid); - amazon_atm_clear_vcc(qid+CBM_RX_OFFSET); - - local_irq_restore(flags); -} - - -/* Brief: initialize internal data structure - */ -static void atm_constructor(amazon_atm_dev_t * dev) -{ - int i; - memset(dev,0,sizeof(amazon_atm_dev_t)); - atm_init_parameters(dev); - //internal: queue "free" flag - for(i=1;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) { - //dev->queues[i].vcc=NULL; - dev->queues[i].free = 1; - } - for(i=0;i<AMAZON_ATM_PORT_NUM;i++){ - dev->ports[i].tx_rem_cr = dev->ports[i].tx_max_cr; - } - //MIB - atomic_set(&dev->dma_tx_free_0,1); //initially there should be free descriptors -} - -/* Brief: return round up base-2 logarithm - */ -static inline int get_log_2(u32 value) -{ - int i=0,j=1; - while (i<11){ - if (j>=value) break; - j=j<<1; - i++; - } - AMAZON_TPE_DMSG("round up base-2 logarithm of %u is %u\n", value, i); - return i; -} - -/* Brief: TPE hardware initialization - * Parameter: specifiy the configurations of the hardware - */ -static inline int atm_init_hard(amazon_atm_dev_t * dev) -{ - int i; - u32 tmp1, tmp2, tmp3; - u8 * mem_addr=NULL; - u8 * qd_addr=NULL; - //PMU power on the module 1st - *(AMAZON_PMU_PWDCR) = (*AMAZON_PMU_PWDCR) | (AMAZON_PMU_PWDCR_TPE); - //Reset the module - *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) | (AMAZON_RST_REQ_TPE); - mb(); - mdelay(100); - *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) & (~(AMAZON_RST_REQ_TPE)); - mb(); - - unsigned long qsb_clk = amazon_get_fpi_hz()>>1; - /*********allocate & arrange memory for CBM *********/ - if (dev->cbm.mem_addr == NULL){ - dev->cbm.allocated = 1; - mem_addr = (u8 *)__get_free_pages(GFP_KERNEL, get_log_2(((CBM_CELL_SIZE * dev->cbm.free_cell_cnt) >>PAGE_SHIFT) + 1)); - if (mem_addr != NULL){ - dev->cbm.mem_addr = mem_addr; - } else { - goto init_no_mem; - } - } - if (dev->cbm.qd_addr == NULL){ -#ifdef CONFIG_USE_VENUS - //to work around a bug, bit15 of QDOFF address should be 1,Aug4, 2004 - //thus, we allocate 64k memory - qd_addr = (u8 *)__get_free_pages(GFP_KERNEL, 4); - if (qd_addr != NULL) { - dev->cbm.qd_addr_free = (u8*) (((unsigned long) qd_addr)); - dev->cbm.qd_addr = (u8*) (((unsigned long) qd_addr) | 0x8000); - }else{ - goto init_no_mem; - } -#else //CONFIG_USE_VENUS - qd_addr = (u8 *)kmalloc( CBM_QD_SIZE * AMAZON_ATM_MAX_QUEUE_NUM, GFP_KERNEL); - if (qd_addr != NULL) { - dev->cbm.qd_addr = qd_addr; - }else { - goto init_no_mem; - } -#endif //CONFIG_USE_VENUS - } -//#ifndef CONFIG_MIPS_UNCACHED - mem_addr = (u8 *)KSEG1ADDR((unsigned long)dev->cbm.mem_addr); - qd_addr = (u8 *)KSEG1ADDR((unsigned long)dev->cbm.qd_addr); -//#endif - //CBM reset cell queue memory, 64 bytes / cell - memset_io(mem_addr, 0, CBM_CELL_SIZE * dev->cbm.free_cell_cnt); - //make a link list, last 4 bytes is pointer - for(i=1;i<dev->cbm.free_cell_cnt;i++){ - AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr + CBM_CELL_SIZE * i)),(mem_addr + CBM_CELL_SIZE * (i-1) + 0x3c)); - } - //reset queue descriptor - memset_io(qd_addr, 0, CBM_QD_SIZE * AMAZON_ATM_MAX_QUEUE_NUM); - //init word 0-2 of q0 (free cell list) - //address of last cell - AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr + CBM_CELL_SIZE * (dev->cbm.free_cell_cnt-1))), qd_addr); - //address of first cell - AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr)), (qd_addr + 4)); - //no. of free cells - AMAZON_WRITE_REGISTER_L(dev->cbm.free_cell_cnt,(qd_addr + 8)); - //init q descriptor for OAM receiving - AMAZON_WRITE_REGISTER_L((CBM_QD_W3_INT_ACA | (divide_by_64_round_up(oam_q_threshold)&0xff)<< CBM_QD_W3_THRESHOLD_SHIFT), (qd_addr + AMAZON_ATM_OAM_Q_ID * CBM_QD_SIZE + 0x0c)); -// AMAZON_WRITE_REGISTER_L((CBM_QD_W3_INT_ACA | (u32)oam_q_threshold<< CBM_QD_W3_THRESHOLD_SHIFT), (qd_addr + AMAZON_ATM_OAM_Q_ID * CBM_QD_SIZE + 0x0c)); - //config CBM - //set offset address and threshold - AMAZON_WRITE_REGISTER_L(CPHYSADDR(qd_addr), CBM_QDOFF_ADDR); - AMAZON_WRITE_REGISTER_L(((dev->cbm.nrt_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_NRTTHR_ADDR); - AMAZON_WRITE_REGISTER_L(((dev->cbm.clp0_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_CLP0THR_ADDR); - AMAZON_WRITE_REGISTER_L(((dev->cbm.clp1_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_CLP1THR_ADDR); - //config interrupts - AMAZON_WRITE_REGISTER_L( CBM_IMR_MASK & (~(CBM_IMR_ACA|CBM_IMR_Q0E|CBM_IMR_Q0I|CBM_IMR_RDE|CBM_IMR_OPF|CBM_IMR_ERR -#ifdef AMAZON_ATM_DEBUG - |CBM_IMR_DISC|CBM_IMR_QFD|CBM_IMR_NFCA|CBM_IMR_CLP1TR|CBM_IMR_CLP0TR|CBM_IMR_NRTTR|CBM_IMR_QTR -#endif -#ifdef AMAZON_TPE_SCR - |CBM_IMR_EF -#endif - )), CBM_IMR0_ADDR); - AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_CBM_INT, CBM_SRC0_ADDR); - - //HTU - //RAM entry for number of possible connections per interface - tmp1 = dev->ports[0].max_conn?dev->ports[0].max_conn-1:0; - AMAZON_WRITE_REGISTER_L(tmp1, HTU_RX0_ADDR); - for(i=1;i<AMAZON_ATM_PORT_NUM;i++){ - tmp1+=dev->ports[i].max_conn; - AMAZON_WRITE_REGISTER_L(tmp1, HTU_RX0_ADDR + 4 * i); - } - dev->cbm.max_q_off = tmp1+1; - //Queue ID for OAM/RM/Other cells - AMAZON_WRITE_REGISTER_L (AMAZON_ATM_OAM_Q_ID, HTU_DESTOAM_ADDR); - AMAZON_WRITE_REGISTER_L( AMAZON_ATM_RM_Q_ID, HTU_DESTRM_ADDR); - AMAZON_WRITE_REGISTER_L( AMAZON_ATM_OTHER_Q_ID, HTU_DESTOTHER_ADDR); - //Timeout - AMAZON_WRITE_REGISTER_L((u32) HTUTIMEOUT, HTU_TIMEOUT_ADDR); -#ifdef AMAZON_ATM_DEBUG - AMAZON_WRITE_REGISTER_L((u32) HTU_ISR_MASK - &(~(HTU_ISR_NE|HTU_ISR_TORD|HTU_ISR_OTOC|HTU_ISR_ONEC|HTU_ISR_PNE|HTU_ISR_PT)), HTU_IMR0_ADDR); - AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS|SRC_SRE_ENABLE|AMAZON_HTU_INT,HTU_SRC0_ADDR); -#endif - //QSB - //global setting, TstepC, SBL, Tau - //Tau - AMAZON_WRITE_REGISTER_L(dev->qsb.tau, QSB_TAU_ADDR); - //SBL - AMAZON_WRITE_REGISTER_L(dev->qsb.sbl, QSB_SBL_ADDR); - //tstep - AMAZON_WRITE_REGISTER_L(dev->qsb.tstepc>>1, QSB_CONFIG_ADDR); - - //port settting - for(i=0;i<AMAZON_ATM_PORT_NUM;i++){ - if ( (dev->ports[i].enable) && (dev->ports[i].tx_max_cr!=0) ){ - tmp1 = ((qsb_clk * dev->qsb.tstepc) >>1) / dev->ports[i].tx_max_cr; - tmp2 = tmp1 / 64; //integer value of Tsb - tmp3 = tmp1%64 + 1; //fractional part of Tsb - //carry over to integer part (?) - if (tmp3 == 64) { - tmp3 = 0; - tmp2++; - } - if (tmp2 == 0){ - tmp2 = 1; - tmp3 = 1; - } - //1. set mask 2. write value to data transfer register 3. start the transfer - //SCT(FracRate) - AMAZON_WRITE_REGISTER_L(QSB_SET_SCT_MASK, QSB_RTM_ADDR); - AMAZON_WRITE_REGISTER_L(tmp3,QSB_RTD_ADDR); - AMAZON_WRITE_REGISTER_L(((QSB_TABLESEL_SCT<<QSB_TABLESEL_SHIFT)|QSB_RAMAC_REG_LOW|QSB_WRITE|i),QSB_RAMAC_ADDR); - //SPT(SBV + PN + IntRage) - AMAZON_WRITE_REGISTER_L(QSB_SET_SPT_MASK, QSB_RTM_ADDR); - AMAZON_WRITE_REGISTER_L(QSB_SPT_SBVALID|tmp2|(i<<16),QSB_RTD_ADDR); - AMAZON_WRITE_REGISTER_L(((QSB_TABLESEL_SPT<<QSB_TABLESEL_SHIFT)|QSB_RAMAC_REG_LOW|QSB_WRITE|i),QSB_RAMAC_ADDR); - - - } - } - - //SWIE: Setup Service Request Control Registers to enable interrupts - AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ISRC_ADDR); - AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ESRC_ADDR); - - wmb(); -#ifdef AMAZON_TPE_TEST_AAL5_INT - AMAZON_WRITE_REGISTER_L(AAL5R_ISR_FE,AAL5_RIMR0_ADDR); - AMAZON_WRITE_REGISTER_L(0, AAL5_SIMR0_ADDR); - AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT,AAL5_SSRC0_ADDR); - AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT,AAL5_RSRC0_ADDR); -#endif //AMAZON_TPE_TEST_AAL5_INT - - AMAZON_WRITE_REGISTER_L(dev->aal5.tx_max_sdu,AAL5_SMFL_ADDR); - AMAZON_WRITE_REGISTER_L(dev->aal5.rx_max_sdu,AAL5_RMFL_ADDR); - AMAZON_WRITE_REGISTER_L(AAL5_SCMD_MODE_POLL // enable polling mode - |AAL5_SCMD_SS - |AAL5_SCMD_AR - ,AAL5_SCMD_ADDR); - //start CBM - AMAZON_WRITE_REGISTER_L(CBM_CFG_START,CBM_CFG_ADDR); - wmb(); - return 0; -init_no_mem: - if (mem_addr != NULL) free_pages((unsigned long)mem_addr,get_log_2(((CBM_CELL_SIZE * dev->cbm.free_cell_cnt) >>PAGE_SHIFT) + 1)); - -#ifdef CONFIG_USE_VENUS - //to work around a bug, bit15 of QDOFF address should be 1 - if (qd_addr != NULL) free_pages((unsigned long)qd_addr,4); -#else //CONFIG_USE_VENUS - if (qd_addr != NULL) kfree(qd_addr); -#endif //CONFIG_USE_VENUS - return -ENOMEM; -} - -/* - * Brief: Create entry in /proc for status information - */ -void atm_create_proc(void) -{ - create_proc_read_entry("amazon_atm", 0,NULL, amazon_atm_read_procmem,(void*)PROC_ATM); - create_proc_read_entry("amazon_atm_mib", 0,NULL, amazon_atm_read_procmem,(void*)PROC_MIB); - create_proc_read_entry("amazon_atm_vcc", 0,NULL, amazon_atm_read_procmem,(void*)PROC_VCC); -#if 0 - create_proc_read_entry("amazon_atm_aal5", 0,NULL, amazon_atm_read_procmem,(void*)PROC_AAL5); - create_proc_read_entry("amazon_atm_cbm", 0,NULL, amazon_atm_read_procmem,(void*)PROC_CBM); - create_proc_read_entry("amazon_atm_htu", 0,NULL, amazon_atm_read_procmem,(void*)PROC_HTU); - create_proc_read_entry("amazon_atm_qsb", 0,NULL, amazon_atm_read_procmem,(void*)PROC_QSB); - create_proc_read_entry("amazon_atm_swie", 0,NULL, amazon_atm_read_procmem,(void*)PROC_SWIE); -#endif -} - -/* - * Brief: Delete entry in /proc for status information - */ -void atm_delete_proc(void) -{ - remove_proc_entry("amazon_atm", NULL); - remove_proc_entry("amazon_atm_mib", NULL); - remove_proc_entry("amazon_atm_vcc", NULL); -#if 0 - remove_proc_entry("amazon_atm_aal5", NULL); - remove_proc_entry("amazon_atm_cbm", NULL); - remove_proc_entry("amazon_atm_htu", NULL); - remove_proc_entry("amazon_atm_qsb", NULL); - remove_proc_entry("amazon_atm_swie", NULL); -#endif -} -/* Brief: Initialize ATM module - * Parameters: no - * Return: &g_atm_dev - sucessful - * NULL - fails: - * 1. invalid parameter - * 2. No memory available - * Description: - * This function configure the TPE components according to the input info, - * -CBM - * -HTU - * -QSB - * -AAL5 - * - */ -amazon_atm_dev_t * amazon_atm_create(void) -{ - int i; - AMAZON_TPE_DMSG("atm_init\n"); - /************initialize global data structure****************/ - atm_constructor(&g_atm_dev); - /***********allocate kernel resources****************/ - //bottom halfs for SWEX - swex_start_task.routine = amazon_atm_swex; - swex_start_task.data = NULL; - swex_complete_task.routine = amazon_atm_swex_push; - swex_complete_task.data = NULL; -#ifdef AMAZON_TPE_SCR - a5r_task.routine = amazon_atm_a5r; - a5r_task.data = NULL; -#endif //AMAZON_TPE_SCR - //SWIN semaphore - sema_init(&(g_atm_dev.swie.in_sem), 1); - //SWIE lock - clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock)); - //SWIE wait queue - init_waitqueue_head(&(g_atm_dev.swie.sleep)); - atm_create_proc(); - - //register DMA - memset(&g_dma_dev,0,sizeof(struct dma_device_info)); - strcpy(g_dma_dev.device_name,"TPE"); - g_dma_dev.weight=1; - g_dma_dev.num_tx_chan=2; - g_dma_dev.num_rx_chan=2; - g_dma_dev.ack=1; - g_dma_dev.tx_burst_len=4; - g_dma_dev.rx_burst_len=4; - //DMA TX - - for(i=0;i<1;i++){ - g_dma_dev.tx_chan[i].weight=QOS_DEFAULT_WGT; - g_dma_dev.tx_chan[i].desc_num=10; - g_dma_dev.tx_chan[i].packet_size=g_atm_dev.aal5.tx_max_sdu + AAL5S_INBOUND_HEADER; - g_dma_dev.tx_chan[i].control=1; - } - //DMA RX - for(i=0;i<2;i++){ - g_dma_dev.rx_chan[i].weight=QOS_DEFAULT_WGT; - /* BingTao's suggestion, change from 5->10 will prevent packet loss in NO_TX_INT mode */ - g_dma_dev.rx_chan[i].desc_num=10; - g_dma_dev.rx_chan[i].packet_size=(g_atm_dev.aal5.rx_max_sdu + AAL5R_TRAILER_LEN+0x10f)&(~0xf); - g_dma_dev.rx_chan[i].control=1; - } - g_dma_dev.intr_handler=amazon_atm_dma_handler; - g_dma_dev.buffer_alloc=amazon_atm_alloc_rx; - g_dma_dev.buffer_free=amazon_atm_free_tx; - dma_device_register(&g_dma_dev); -/***********intialize the atm hardware ****************/ - if ( atm_init_hard(&g_atm_dev) != 0){ - return NULL; - } - //start CBM - AMAZON_WRITE_REGISTER_L(CBM_CFG_START,CBM_CFG_ADDR); - wmb(); - - //Start HTU - AMAZON_WRITE_REGISTER_L(HTU_CFG_START ,HTU_CFG_ADDR); - wmb(); - - - // Register interrupts for insertion and extraction - request_irq(AMAZON_SWIE_INT, amazon_atm_swie_isr, IRQF_DISABLED, "tpe_swie", NULL); - request_irq(AMAZON_CBM_INT, amazon_atm_cbm_isr, IRQF_DISABLED, "tpe_cbm", NULL); -#ifdef AMAZON_ATM_DEBUG - request_irq(AMAZON_HTU_INT , amazon_atm_htu_isr, IRQF_DISABLED, "tpe_htu", NULL); -#endif -#ifdef AMAZON_TPE_TEST_AAL5_INT - request_irq(AMAZON_AAL5_INT, amazon_atm_aal5_isr, IRQF_DISABLED, "tpe_aal5", NULL); -#endif - return &g_atm_dev; -} - -/* Brief: clean up atm - * Parameters: no - * Return: no - * Description: - * Disable the device. - */ -void amazon_atm_cleanup(void){ - int i; - clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock)); - wake_up(&g_atm_dev.swie.sleep); - up(&g_atm_dev.swie.in_sem); - // diable SWIE interrupts - AMAZON_WRITE_REGISTER_L(0, SWIE_ISRC_ADDR); - AMAZON_WRITE_REGISTER_L(0, SWIE_ESRC_ADDR); - wmb(); - - // Disable schedulers ( including interrupts )----------------------- - for (i = 0; i < AMAZON_ATM_PORT_NUM; i++); - { - AMAZON_WRITE_REGISTER_L(QSB_SET_SPT_SBVALID_MASK, QSB_RTM_ADDR); - AMAZON_WRITE_REGISTER_L( 0 ,QSB_RTD_ADDR); - AMAZON_WRITE_REGISTER_L( (QSB_TABLESEL_SPT<<QSB_TABLESEL_SHIFT) - | QSB_RAMAC_REG_LOW - | QSB_WRITE - | i, - QSB_RAMAC_ADDR); - } - // disable QSB_Interrupts - AMAZON_WRITE_REGISTER_L( 0, QSB_IMR_ADDR); - AMAZON_WRITE_REGISTER_L( 0, QSB_SRC_ADDR); - // disable CBM interrupts - AMAZON_WRITE_REGISTER_L( 0 , CBM_IMR0_ADDR); - AMAZON_WRITE_REGISTER_L( 0 , CBM_SRC0_ADDR); - // set CBM start bit to 0 - AMAZON_WRITE_REGISTER_L(0,CBM_CFG_ADDR); - // request hardware extraction of queue 0, wich should force the CBM - // to recognize that the start bit is not set - AMAZON_WRITE_REGISTER_L(CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR); - // write frame extraction command into the hw extract command register - AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR); - // disable htu - // disable all HTU interrupts - AMAZON_WRITE_REGISTER_L(0 ,HTU_IMR0_ADDR); - AMAZON_WRITE_REGISTER_L(0 ,HTU_SRC0_ADDR); - - if (g_atm_dev.cbm.allocated){ - free_pages((unsigned long)g_atm_dev.cbm.mem_addr, get_log_2(((CBM_CELL_SIZE * g_atm_dev.cbm.free_cell_cnt) >>PAGE_SHIFT)+1)); -#ifdef CONFIG_USE_VENUS - //to work around a bug, bit15 of QDOFF address should be 1 - free_pages((unsigned long)g_atm_dev.cbm.qd_addr_free,4); -#else //CONFIG_USE_VENUS - kfree(g_atm_dev.cbm.qd_addr); -#endif //CONFIG_USE_VENUS - } - atm_delete_proc(); - // free interrupts for insertion and extraction - dma_device_unregister(&g_dma_dev); - free_irq(AMAZON_SWIE_INT, NULL); - free_irq(AMAZON_CBM_INT, NULL); -#ifdef AMAZON_ATM_DEBUG - free_irq(AMAZON_HTU_INT, NULL); -#endif -#ifdef AMAZON_TPE_TEST_AAL5_INT - free_irq(AMAZON_AAL5_INT, NULL); -#endif - -} - -/************************ ATM network interface ***********************************************/ -/* Brief: getsockopt - */ -int amazon_atm_getsockopt(struct atm_vcc *vcc, int level, int optname, char *optval, int optlen) -{ - int err=0; - atm_aal5_vcc_t mib_vcc; - AMAZON_TPE_DMSG("1\n"); - switch (optname){ - case SO_AMAZON_ATM_MIB_VCC: - AMAZON_TPE_DMSG("2\n"); - err = amazon_atm_vcc_mib(vcc, &mib_vcc); - AMAZON_TPE_DMSG("%u\n",mib_vcc.aal5VccCrcErrors); - err = copy_to_user((void *)optval,&mib_vcc, sizeof(mib_vcc)); - AMAZON_TPE_DMSG("err %u\n",err); - break; - default: - return -EFAULT; - } - return err; -} - -/* Brief: IOCTL - */ - -int amazon_atm_ioctl(struct atm_dev *dev,unsigned int cmd,void *arg) -{ - int err=0; - //MIB - atm_cell_ifEntry_t mib_cell; - atm_aal5_ifEntry_t mib_aal5; - atm_aal5_vcc_x_t mib_vcc; - if (_IOC_TYPE(cmd) != AMAZON_ATM_IOC_MAGIC) return -ENOTTY; - if (_IOC_NR(cmd) > AMAZON_ATM_IOC_MAXNR) return -ENOTTY; - - if (_IOC_DIR(cmd) & _IOC_READ) - err = !access_ok(VERIFY_WRITE, (void *)arg, _IOC_SIZE(cmd)); - else if (_IOC_DIR(cmd) & _IOC_WRITE) - err = !access_ok(VERIFY_READ, (void *)arg, _IOC_SIZE(cmd)); - if (err) { - AMAZON_TPE_EMSG("acess verification fails \n"); - return -EFAULT; - } - switch(cmd) { - case AMAZON_ATM_MIB_CELL: - err = amazon_atm_cell_mib(&mib_cell,(u32)arg); - if (err==0){ - err = __copy_to_user((void *)arg,&mib_cell,sizeof(mib_cell)); - }else{ - AMAZON_TPE_EMSG("cannot get MIB ATM_CELL\n"); - } - break; - case AMAZON_ATM_MIB_AAL5: - err = amazon_atm_aal5_mib(&mib_aal5); - if (err==0){ - err=__copy_to_user(arg, &mib_aal5, sizeof(mib_aal5)); - }else{ - AMAZON_TPE_EMSG("cannot get MIB ATM_AAL5\n"); - } - break; - case AMAZON_ATM_MIB_VCC: - err=__copy_from_user(&mib_vcc,arg, sizeof(mib_vcc)); - AMAZON_TPE_DMSG("return of copy_from_user %x\n",err); - err = amazon_atm_vcc_mib_x(mib_vcc.vpi, mib_vcc.vci, &(mib_vcc.mib_vcc)); - if (err==0){ - err=__copy_to_user(arg, &mib_vcc, sizeof(mib_vcc)); - }else{ - AMAZON_TPE_EMSG("cannot get MIB ATM_VCC\n"); - } - - default: - return -ENOTTY; - } - return err; -} -/* Brief: return a link list of OAM related time stamp info - * Parameter: none - * Return: - a link list of "struct oam_last_activity" data - * Description: - Each time, a F4/F5 cell or AAL5 packet is received, the time stamp is updated. - Through this call, u get a list of this time stamp for all active connection. - Please note that u have read-only access. - */ -const struct oam_last_activity* get_oam_time_stamp() -{ - int i,j; - for(i=CBM_DEFAULT_Q_OFFSET+CBM_RX_OFFSET,j=0;i<CBM_RX_OFFSET+CBM_DEFAULT_Q_OFFSET+AMAZON_ATM_MAX_VCC_NUM;i++){ - if (g_atm_dev.queues[i].free != 1 && g_atm_dev.queues[i].vcc != NULL){ - //active connection - if (j !=0 ){ - g_oam_time_stamp[j-1].next = &g_oam_time_stamp[j]; - } - g_oam_time_stamp[j].vpi = g_atm_dev.queues[i].vcc->vpi; - g_oam_time_stamp[j].vci = g_atm_dev.queues[i].vcc->vci; - g_oam_time_stamp[j].stamp = g_atm_dev.queues[i].access_time; - g_oam_time_stamp[j].next = NULL; - j++; - } - } - if (j==0) { - return NULL; - }else{ - return g_oam_time_stamp; - } -} - - -/* Brief: call back routine for rx - * Parameter: - * vcc atm_vcc pointer - * skb data if no error - err error flag, 0: no error, 1:error - * Return: - * 0 - * <>0 cannot push up - * Description: - * release the packet if cannot push up - */ -static int amazon_atm_net_push(struct atm_vcc *vcc,struct sk_buff *skb, int err) -{ - if (err){ - if (vcc && vcc->stats) { - atomic_inc(&vcc->stats->rx_err); - } - }else{ - ATM_SKB(skb)->vcc = vcc; - - if (!atm_charge(vcc, skb->truesize)){ - //no space this vcc - AMAZON_TPE_EMSG("no space for this vcc\n"); - dev_kfree_skb_any(skb); - return -ENOMEM; - } - atomic_inc(&vcc->stats->rx); - AMAZON_TPE_DMSG("push to vcc\n"); - vcc->push(vcc,skb); - } - return 0; -} -int amazon_atm_net_send_oam(struct atm_vcc*vcc, void *cell, int flags) -{ - return amazon_atm_send_oam(vcc,cell,flags); -} - -int amazon_atm_net_send(struct atm_vcc *vcc,struct sk_buff *skb) -{ - int err=0; - if (vcc->qos.aal == ATM_AAL0 || vcc->qos.aal == ATM_AAL5) { - err=amazon_atm_send(vcc,skb); - }else{ - //not supported - err = -EPROTONOSUPPORT; - } - if (err){ - atomic_inc(&vcc->stats->tx_err); - }else{ - atomic_inc(&vcc->stats->tx); - } - AMAZON_TPE_DMSG("sent, tx_inuse:%u\n", atomic_read(&vcc->tx_inuse)); - return err; -} - -int amazon_atm_net_open(struct atm_vcc *vcc,short vpi, int vci) -{ - vcc->itf = (int) vcc->dev->dev_data; - vcc->vpi = vpi; - vcc->vci = vci; - return(amazon_atm_open(vcc,amazon_atm_net_push)); -} - -static int amazon_atm_change_qos(struct atm_vcc *vcc, struct atm_qos *qos, int flgs) -{ - int qid; - - if (vcc == NULL || qos == NULL){ - AMAZON_TPE_EMSG("invalid parameters\n"); - return -EINVAL; - } - qid = amazon_atm_get_queue(vcc); - if (valid_qid(qid) != 1) { - AMAZON_TPE_EMSG("no vcc connection opened\n"); - return -EINVAL; - } - set_qsb(vcc,qos,qid); - return 0; -} - -static struct atmdev_ops amazon_atm_ops = { - open: amazon_atm_net_open, - close: amazon_atm_close, - ioctl: amazon_atm_ioctl, - send: amazon_atm_net_send, - send_oam: amazon_atm_net_send_oam, -// getsockopt: amazon_atm_getsockopt, - change_qos: amazon_atm_change_qos, -// proc_read: amazon_atm_proc_read, - owner: THIS_MODULE, -}; // ATM device callback functions - -/* - * brief "/proc" function - */ -int amazon_atm_read_procmem(char *buf, char **start, off_t offset,int count, int *eof, void *data) -{ - int buf_off=0; /* for buf */ - int i=0,j=0; - int type= (u32)data;//which module - atm_aal5_ifEntry_t mib_aal5; - atm_cell_ifEntry_t mib_cell; - atm_aal5_vcc_t mib_vcc; - switch(type){ - case PROC_MIB: - //MIB counter - amazon_atm_aal5_mib(&mib_aal5); - //TX: - buf_off+=sprintf(buf+buf_off,"\n============= AAL5 Upstream =========\n"); - buf_off+=sprintf(buf+buf_off,"received %u (pkts) from upper layer\n", mib_aal5.ifOutUcastPkts); - buf_off+=sprintf(buf+buf_off,"errors: %u (pkts)\n",mib_aal5.ifOutErros); - buf_off+=sprintf(buf+buf_off,"discards: %u (ptks)\n", mib_aal5.ifOutDiscards); - buf_off+=sprintf(buf+buf_off,"transmitted: %x-%x (bytes) \n", - mib_aal5.ifHCOutOctets_h, mib_aal5.ifHCOutOctets_l); - //RX: - buf_off+=sprintf(buf+buf_off,"\n============= AAL5 Downstream =========\n"); - buf_off+=sprintf(buf+buf_off,"received %x-%x (bytes)\n", - mib_aal5.ifHCInOctets_h,mib_aal5.ifHCInOctets_l); - buf_off+=sprintf(buf+buf_off,"discards: %u (ptks)\n",mib_aal5.ifInDiscards); - buf_off+=sprintf(buf+buf_off,"errors: %u (ptks)\n",mib_aal5.ifInErrors); - buf_off+=sprintf(buf+buf_off,"passed %u (ptks) to upper layer\n",mib_aal5.ifInUcastPkts); - - //Cell level - buf_off+=sprintf(buf+buf_off,"\n============= ATM Cell =========\n"); - amazon_atm_cell_mib(&mib_cell,0); -#ifdef AMAZON_TPE_READ_ARC - buf_off+=sprintf(buf+buf_off,"Port 0: downstream received: %x-%x (bytes)\n",mib_cell.ifHCInOctets_h,mib_cell.ifHCInOctets_l); - buf_off+=sprintf(buf+buf_off,"Port 0: upstream transmitted: %x-%x (bytes)\n",mib_cell.ifHCOutOctets_h,mib_cell.ifHCOutOctets_l); - buf_off+=sprintf(buf+buf_off,"Port 0: downstream errors: %u (cells)\n",mib_cell.ifInErrors); - amazon_atm_cell_mib(&mib_cell,1); - buf_off+=sprintf(buf+buf_off,"Port 1: downstream received: %x-%x (bytes)\n",mib_cell.ifHCInOctets_h,mib_cell.ifHCInOctets_l); - buf_off+=sprintf(buf+buf_off,"Port 1: upstream transmitted: %x-%x (bytes)\n",mib_cell.ifHCOutOctets_h,mib_cell.ifHCOutOctets_l); - buf_off+=sprintf(buf+buf_off,"Port 1: downstream errors: %u (cells)\n",mib_cell.ifInErrors); -#endif - buf_off+=sprintf(buf+buf_off,"HTU discards: %u (cells)\n",mib_cell.ifInUnknownProtos); - - buf_off+=sprintf(buf+buf_off,"\n====== Specials =====\n"); - buf_off+=sprintf(buf+buf_off,"AAL5S PPD: %u (cells)\n",g_atm_dev.mib_counter.tx_ppd); -#ifdef AMAZON_TPE_SCR - buf_off+=sprintf(buf+buf_off,"Reassembly wait: %u \n",g_a5r_wait); -#endif - break; - case PROC_ATM: - //Interface (Port) - buf_off+=sprintf(buf+buf_off,"[Interfaces]\n"); - for(i=0;i<AMAZON_ATM_PORT_NUM;i++){ - if (g_atm_dev.ports[i].enable==0){ - buf_off+=sprintf(buf+buf_off,"\tport[%u] not in use\n",i); - }else{ - buf_off+=sprintf(buf+buf_off,"\tport[%u]\n\t\tmax_conn=%u\n" - ,i - ,g_atm_dev.ports[i].max_conn - ); - buf_off+=sprintf(buf+buf_off,"\t\ttx_max=%u\n\t\trem=%u\n\t\tcur=%u\n" - ,g_atm_dev.ports[i].tx_max_cr - ,g_atm_dev.ports[i].tx_rem_cr - ,g_atm_dev.ports[i].tx_cur_cr - ); - } - - } - //Units Info - //AAL5 - buf_off+=sprintf(buf+buf_off,"[AAL5]\n\tpad=%c(%x)\n\trx_mtu=%u\n\ttx_mtu=%u\n" - ,g_atm_dev.aal5.padding_byte - ,g_atm_dev.aal5.padding_byte - ,g_atm_dev.aal5.rx_max_sdu - ,g_atm_dev.aal5.tx_max_sdu - ); - //CBM - buf_off+=sprintf(buf+buf_off, - "[CBM]\n\tnrt_thr=%u\n\tclp0_thr=%u\n\tclp1_thr=%u\n\ttx_q_threshold=%u\n\trx_q_threshold=%u\n\toam_q_threshold=%u\n\tfree_cell_cnt=%u\n" - ,g_atm_dev.cbm.nrt_thr - ,g_atm_dev.cbm.clp0_thr - ,g_atm_dev.cbm.clp1_thr - ,tx_q_threshold - ,rx_q_threshold - ,oam_q_threshold - ,g_atm_dev.cbm.free_cell_cnt - ); - //QSB - buf_off+=sprintf(buf+buf_off,"[QSB]\n\ttau=%u\n\ttstepc=%u\n\tsbl=%u\n" - ,g_atm_dev.qsb.tau - ,g_atm_dev.qsb.tstepc - ,g_atm_dev.qsb.sbl - ); - buf_off+=sprintf(buf+buf_off,"[Debugging]\n\taal5_need_copy=%u\n",g_atm_dev.aal5.cnt_cpy); - break; - case PROC_VCC: - for(i=CBM_DEFAULT_Q_OFFSET,j=0;i<g_atm_dev.cbm.max_q_off+CBM_DEFAULT_Q_OFFSET;i++){ - if (g_atm_dev.queues[i].free!=1){ - buf_off+=sprintf(buf+buf_off,"vcc[%u]\n\tvpi=%u vci=%u itf=%u qid=%u access_time=%u.%u\n" - ,j++ - ,g_atm_dev.queues[i].vcc->vpi - ,g_atm_dev.queues[i].vcc->vci - ,g_atm_dev.queues[i].vcc->itf - ,i - ,(u32)g_atm_dev.queues[i+CBM_RX_OFFSET].access_time.tv_sec - ,(u32)g_atm_dev.queues[i+CBM_RX_OFFSET].access_time.tv_usec - ); - buf_off+=sprintf(buf+buf_off,"\tqos_tx class=%u max_pcr=%u pcr=%u min_pcr=%u scr=%u mbs=%u cdv=%u\n" - ,g_atm_dev.queues[i].vcc->qos.txtp.traffic_class - ,g_atm_dev.queues[i].vcc->qos.txtp.max_pcr - ,g_atm_dev.queues[i].vcc->qos.txtp.pcr - ,g_atm_dev.queues[i].vcc->qos.txtp.min_pcr - ,g_atm_dev.queues[i].vcc->qos.txtp.scr - ,g_atm_dev.queues[i].vcc->qos.txtp.mbs - ,g_atm_dev.queues[i].vcc->qos.txtp.cdv - ); - buf_off+=sprintf(buf+buf_off,"\tqos_rx class=%u max_pcr=%u pcr=%u min_pcr=%u scr=%u mbs=%u cdv=%u\n" - ,g_atm_dev.queues[i].vcc->qos.rxtp.traffic_class - ,g_atm_dev.queues[i].vcc->qos.rxtp.max_pcr - ,g_atm_dev.queues[i].vcc->qos.rxtp.pcr - ,g_atm_dev.queues[i].vcc->qos.rxtp.min_pcr - ,g_atm_dev.queues[i].vcc->qos.rxtp.scr - ,g_atm_dev.queues[i].vcc->qos.rxtp.mbs - ,g_atm_dev.queues[i].vcc->qos.rxtp.cdv - ); - __amazon_atm_vcc_mib((i+CBM_RX_OFFSET),&mib_vcc); - buf_off+=sprintf(buf+buf_off,"\tCRC error=%u\n", mib_vcc.aal5VccCrcErrors); - buf_off+=sprintf(buf+buf_off,"\toversized packet=%u\n", mib_vcc.aal5VccOverSizedSDUs); -#ifdef AMAZON_ATM_DEBUG - if ( valid_qid(i+CBM_RX_OFFSET)){ - buf_off+=sprintf(buf+buf_off,"\tdownstream statics\n" ); - buf_off+=sprintf(buf+buf_off,"\t\tpackets=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_PKT]); - buf_off+=sprintf(buf+buf_off,"\t\terr_packets=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_ERR] ); - buf_off+=sprintf(buf+buf_off,"\t\tsw_dropped=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_SW_DROP] ); - } - - buf_off+=sprintf(buf+buf_off,"\tupstream statics\n" ); - buf_off+=sprintf(buf+buf_off,"\t\tpackets=%u\n",g_atm_dev.queues[i].qs[QS_PKT]); - buf_off+=sprintf(buf+buf_off,"\t\terr_packets=%u\n",g_atm_dev.queues[i].qs[QS_ERR] ); - buf_off+=sprintf(buf+buf_off,"\t\thw_dropped=%u\n",g_atm_dev.queues[i].qs[QS_HW_DROP] ); - buf_off+=sprintf(buf+buf_off,"\t\tsw_dropped=%u\n",g_atm_dev.queues[i].qs[QS_SW_DROP] ); - -#endif - - } - - } - break; - default: - break; - } - if(buf_off>0) *eof = 1; - return buf_off; -} - -#ifdef AMAZON_TPE_AAL5_RECOVERY -extern int (*tpe_reset)(void); -extern int (*tpe_start)(void); -extern int (*tpe_inject)(void); -/* Brief: Reset TPE hardware - * Description - * This is a wordaround for AAL5 bug. It tries to reset TPE. - * take care of software - * setup all previous connection - */ -int amazon_tpe_reset(void) -{ - struct atm_vcc * vcc; - int err=0; - int i; - u8 * qd_addr; - u32 reg_l, reg_h; - unsigned int a_cfg_value=0; - unsigned int a_cfg_old_value=0; - atm_aal5_ifEntry_t mib_aal5; - atm_cell_ifEntry_t mib_cell; - - //make sure all cells transmitting out first - //Segmentation done - amazon_atm_aal5_mib(&mib_aal5); - reg_l = g_atm_dev.mib_counter.tx_cnt_l; - reg_h = g_atm_dev.mib_counter.tx_cnt_h; - while(1){ - mdelay(10); - amazon_atm_aal5_mib(&mib_aal5); - if( (reg_l == g_atm_dev.mib_counter.tx_cnt_l) && (reg_h == g_atm_dev.mib_counter.tx_cnt_h) ){ - break; - } - AMAZON_TPE_DMSG("AAL5 Segmentation still in progress!\n"); - reg_l = g_atm_dev.mib_counter.tx_cnt_l; - reg_h = g_atm_dev.mib_counter.tx_cnt_h; - } - //QSB done - qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr); - for (i=1;i<15;i++){ - while ( (err=readl(qd_addr+i*CBM_QD_SIZE+0x8)&0xffff) !=0 ){ - mdelay(20); - AMAZON_TPE_DMSG("queue %u not empty (%u)\n",i,err); - } - } - //insurance for interfaces between Aware and CARB - mdelay(100); - amazon_atm_cell_mib(&mib_cell,0); - amazon_atm_cell_mib(&mib_cell,1); - amazon_atm_aal5_mib(&mib_aal5); - - mb(); - while ( (AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0) != 0 ) || (AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0) != 0 ) ){ - AMAZON_TPE_EMSG("\nwaiting for AWARE"); - AMAZON_TPE_EMSG(" BC0 %u ", AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0)); - AMAZON_TPE_EMSG(" BC1 %u ", AMAZON_READ_REGISTER_L(AR_CELLRDY_BC1)); - AMAZON_TPE_EMSG("\n"); - mdelay(1); - } - // disable AAI module - meiDebugRead(A_CFG_ADDR,&a_cfg_value,1); - a_cfg_old_value=a_cfg_value; - a_cfg_value &= (~(0x2800)); - meiDebugWrite(A_CFG_ADDR,&a_cfg_value,1); - //clear buffer - a_cfg_value = 0x1; - meiDebugWrite(AR_CB0_STATUS_ADDR,&a_cfg_value,1); - meiDebugWrite(AR_CB1_STATUS_ADDR,&a_cfg_value,1); - - if ( atm_init_hard(&g_atm_dev) != 0){ - return -EIO; - } - sema_init(&(g_atm_dev.swie.in_sem), 1); - //SWIE lock - clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock)); - //SWIE wait queue - init_waitqueue_head(&(g_atm_dev.swie.sleep)); - - for (i=CBM_DEFAULT_Q_OFFSET;i<AMAZON_ATM_MAX_QUEUE_NUM/2;i++) { - vcc = g_atm_dev.queues[i].vcc; - if (vcc != NULL){ - set_qsb(vcc, &vcc->qos, i); - set_qd(vcc, i); - mb(); - err=set_htu(vcc,i); - if (err){ - AMAZON_TPE_EMSG("set htu entry fails %u\n",err); - } - } - } - meiDebugWrite(A_CFG_ADDR,&a_cfg_old_value,1); -#if 0 - //reset DFE - *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) | (AMAZON_RST_REQ_DFE); - mb(); - *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) & (~AMAZON_RST_REQ_DFE); - mb(); -#endif - - return 0; -} - -/* Brief: Send a ATM EoP packet to save DMA channel - */ -int amazon_tpe_inject_debug_cell(void) -{ - //Send a ATM cell to save DMA channel - u8 qid; - unsigned char atm_cell[48]; - qid = 0x11; - AMAZON_TPE_DMSG("qid = %d\n",qid); - memset(atm_cell,0,48); - atm_cell[3] = 0x2; - if ( amazon_atm_swin(qid,atm_cell)) { - AMAZON_TPE_EMSG("cannot insert EoP cell\n"); - return -1; - } - return 0; -} - -/* Brief: start HTU (TPE) - */ - -int amazon_tpe_start(void) -{ - AMAZON_WRITE_REGISTER_L(HTU_CFG_START ,HTU_CFG_ADDR); - wmb(); - return 0; -} -#endif //AMAZON_TPE_AAL5_RECOVERY - -#ifdef AMAZON_CHECK_LINK -extern int (*adsl_link_notify)(int); -/* Brief: notify link status of ADSL link - * Parameters: 0 link down - * 1 link up - * Returns: 0 OK - * Details: called by MEI driver - * should update status and inform upper layer - */ -int amazon_tpe_link_notify(int status) -{ - adsl_link_status = status; - AMAZON_TPE_DMSG("link status %s\n",(status==1)?"Up":"Down"); - if (status == 0){ - //wait until no cells in upstream queues - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(2*HZ); - } - return 0; -} -#endif //ifdef AMAZON_CHECK_LINK - -/* - * Brief: Initialize ATM module - * - * Return Value: ENOMEM - No memory available - * EBUSY - Cannot register atm device - * ERESTARTSYS - Process interrupted by other signal - * 0 - OK, module initialized - * - * Description: - * This function registers an atm device for all UTOPIA devices. - * It also allocates memory for the private device data structures - */ -int __init amazon_atm_net_init(void) -{ - int i; - int err=0; - amazon_atm_dev_t *dev = NULL; - - if ((dev=amazon_atm_create()) != NULL){ - for(i=0;i<AMAZON_ATM_PORT_NUM;i++){ - if (!dev->ports[i].enable){ - amazon_atm_devs[i] = NULL; - continue; - } - amazon_atm_devs[i] =atm_dev_register("amazon_atm",&amazon_atm_ops,-1,0UL); - if (amazon_atm_devs[i] == NULL){ - AMAZON_TPE_EMSG("atm_dev_register fails\n"); - err = -EIO; - goto amazon_atm_net_init_exit; - }else{ - AMAZON_TPE_DMSG("registering device %u\n",i); - amazon_atm_devs[i]->ci_range.vpi_bits = 8; - amazon_atm_devs[i]->ci_range.vci_bits = 16; - amazon_atm_devs[i]->link_rate = dev->ports[i].tx_max_cr; - amazon_atm_devs[i]->dev_data = (void *) i; - } - } - - }else{ - err = -ENOMEM; - AMAZON_TPE_EMSG("cannot init atm device\n"); - goto amazon_atm_net_init_exit; - } -#ifdef AMAZON_TPE_AAL5_RECOVERY - tpe_reset = & amazon_tpe_reset; - tpe_start = & amazon_tpe_start; - tpe_inject = & amazon_tpe_inject_debug_cell; -#endif //AMAZON_TPE_AAL5_RECOVERY -#ifdef AMAZON_CHECK_LINK - adsl_link_notify=amazon_tpe_link_notify; -#endif //AMAZON_CHECK_LINK -amazon_atm_net_init_exit: - return err; -} - -void __exit amazon_atm_net_cleanup(void) -{ - int i; - amazon_atm_cleanup(); - for(i=0;i<AMAZON_ATM_PORT_NUM;i++){ - if (amazon_atm_devs[i] != NULL){ - AMAZON_TPE_DMSG("unregister dev %u\n",i); - atm_dev_deregister(amazon_atm_devs[i]); - } - } - return; -} -EXPORT_SYMBOL(get_oam_time_stamp); - -MODULE_LICENSE ("GPL"); -MODULE_AUTHOR("Infineon IFAP DC COM peng.liu@infineon.com"); -MODULE_DESCRIPTION("AMAZON ATM driver"); - -module_init(amazon_atm_net_init); -module_exit(amazon_atm_net_cleanup); - - - - - diff --git a/target/linux/amazon/files/drivers/char/amazon_mei.c b/target/linux/amazon/files/drivers/char/amazon_mei.c deleted file mode 100644 index 7efe52ed60..0000000000 --- a/target/linux/amazon/files/drivers/char/amazon_mei.c +++ /dev/null @@ -1,7918 +0,0 @@ -/* ============================================================================ - * Copyright (C) 2004 -Infineon Technologies AG. - * - * All rights reserved. - * ============================================================================ - * - *============================================================================ - * Licensed under GNU GPL v2 - * ============================================================================ - */ - - -/* =========================================================================== - * - * File Name: amazon_mei.c - * Author : Ou Ke - * - * =========================================================================== - * - * Project: Amazon - * - * =========================================================================== - * Contents:This file implements the MEI driver for Amazon ADSL/ADSL2+ - * controller. - * - * =========================================================================== - * References: - * - */ - - -/* =========================================================================== - * Revision History: - * 12/1/2005 : Ritesh Banerjee - * - Create a kernel thread kmibpoll to poll for periodic RFC 2662 - * and RFC 3440 counters. Removes the need for user space - * adsl_mibpoll_daemon and saves atleast 30KB of RAM. - * - * $Log$ - * =========================================================================== - */ - -/* - * =========================================================================== - * INCLUDE FILES - * =========================================================================== - */ -//000002:fchang 2005/6/2 joelin 04/27/2005 for pcm clock -//000003:fchang 2005/6/2 Henry added for Amazon-E support -//165001:henryhsu 2005/9/6 Modify for adsl firmware version 1.2.1.2.0.1 DATA_LED can't flash. -// 509221:tc.chen 2005/09/22 Reset DFE added when MEI_TO_ARC_CS_DONE not cleared by ARC -// 603221:tc.chen 2006/03/21 added APIs to support the WEB related parameters for ADSL Statistics - -#ifndef EXPORT_SYMTAB -#define EXPORT_SYMTAB -#endif -#define AMAZON_MEI_MIB_RFC3440 - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/version.h> -#include <linux/types.h> -#include <linux/fs.h> -#include <linux/mm.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <asm/irq.h> -#include <asm/segment.h> -#include <asm/semaphore.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <asm/uaccess.h> -#include <linux/proc_fs.h> -#include <asm/io.h> -#include <linux/vmalloc.h> -#include <linux/delay.h> -#include <linux/poll.h> -#include <linux/list.h> -#include <linux/time.h> - -#include <asm/amazon/amazon.h> -#include <asm/irq.h> -#include <asm/amazon/irq.h> -#include <asm/amazon/amazon_mei.h> -#include <asm/amazon/amazon_mei_app.h> -#include <asm/amazon/amazon_mei_ioctl.h> -#include <asm/amazon/amazon_mei_app_ioctl.h> - -#define SET_BIT(reg, mask) reg |= (mask) -#define CLEAR_BIT(reg, mask) reg &= (~mask) -#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask) -#define SET_BITS(reg, mask) SET_BIT(reg, mask) -#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);} - -extern void mask_and_ack_amazon_irq(unsigned int irq_nr); - -#ifdef AMAZON_CHECK_LINK -//amazon_tpe.c -extern int (*adsl_link_notify)(int); -#endif //AMAZON_CHECK_LINK - -// for ARC memory access -#define WHILE_DELAY 20000 -#define AMAZON_DMA_DEBUG_MUTEX - - -//TODO -#undef DFE_LOOPBACK -#define ARC_READY_ACK - -static amazon_mei_mib * current_intvl; -static struct list_head interval_list; -static amazon_mei_mib * mei_mib; - -static int reboot_firsttime=1;//000002:fchang - - //PCM -#define PCM_CHANNEL_NUM 2 //1 rx, 1 tx -static pcm_data_struct pcm_data[PCM_CHANNEL_NUM]__attribute__ ((aligned(4))); //0=tx0, 1=rx0, 2=tx1, 3=rx1 -static u32 pcm_start_addr; -//#define PCM_HRT_TIME_HZ 4000 //?us -#define PCM_ACCESS_DEBUG -static int irqtimes=0; -#undef DATA_LED_ON_MODE -#define ADSL_LED_SUPPORT //joelin for adsl led -#ifdef ADSL_LED_SUPPORT -static int firmware_support_led=0; //joelin version check for adsl led -static int stop_led_module=0; //wakeup and clean led module -static int led_support_check=0; //1.1.2.7.1.1 -#endif //ADSL_LED_SUPPORT -#define IFX_DYING_GASP -#ifdef IFX_DYING_GASP -static wait_queue_head_t wait_queue_dying_gasp; //dying gasp -//struct tq_struct dying_gasp_task; //dying gasp -static wait_queue_head_t wait_queue_uas_poll; //joelin 04/16/2005 -static u16 unavailable_seconds=0; //joelin 04/16/2005 -static meidebug lop_debugwr; //dying gasp -#endif //IFX_DYING_GASP -static int dbg_int=0; -//#define DEBUG_ACCESS_DELAY for(dbg_int=0;dbg_int<100;dbg_int++){;} -#define DEBUG_ACCESS_DELAY -static u8 sampledata[512]; -static int firsttime[PCM_CHANNEL_NUM]={0,1}; -static int num_cmp[PCM_CHANNEL_NUM]={0,0}; -static int pcm_start_loc[PCM_CHANNEL_NUM]={0,0}; - - // for clearEoC -//#define MEI_CLREOC_BUFF_SIZE 512 //double the receive fifo size, bytes -//static u8 clreoc[MEI_CLREOC_BUFF_SIZE]__attribute__ ((aligned(4))); //buffer to hold clearEoC data in bytes -#undef AMAZON_CLEAR_EOC -#ifdef AMAZON_CLEAR_EOC -extern void ifx_push_eoc(struct sk_buff * pkt); -#endif -static int meiResetArc(void); -#define IFX_POP_EOC_DONE 0 -#define IFX_POP_EOC_FAIL -1 -static struct list_head clreoc_list; -static amazon_clreoc_pkt * clreoc_pkt; -#define CLREOC_BUFF_SIZE 12 //number of clreoc commands being buffered -//static int clreoc_wr=0; -//static int clreoc_rd=0; //used to control clreoc circular buffer -static wait_queue_head_t wait_queue_clreoc; -#ifdef ADSL_LED_SUPPORT -static wait_queue_head_t wait_queue_led; //adsl led -static wait_queue_head_t wait_queue_led_polling;// adsl led -struct tq_struct led_task; // adsl led -static DECLARE_TASK_QUEUE(tq_ifx_led); // task -int adsl_led_flash_task(void *ptr); // adsl led -#endif //ADSL_LED_SUPPORT -static void * clreoc_command_pkt=NULL; -static int clreoc_max_tx_len=0; - -// 603221:tc.chen start -#define ME_HDLC_IDLE 0 -#define ME_HDLC_INVALID_MSG 1 -#define ME_HDLC_MSG_QUEUED 2 -#define ME_HDLC_MSG_SENT 3 -#define ME_HDLC_RESP_RCVD 4 -#define ME_HDLC_RESP_TIMEOUT 5 -#define ME_HDLC_RX_BUF_OVERFLOW 6 -#define ME_HDLC_UNRESOLVED 1 -#define ME_HDLC_RESOLVED 2 -// 603221:tc.chen end - -#ifdef LOCK_RETRY -static int reboot_lock=0; -#endif - -static mib_previous_read mib_pread={0,0,0,0,0,0,0,0,0,0,0,0}; -static mib_flags_pretime mib_pflagtime;// initialized when module loaded - - static u32 ATUC_PERF_LOFS=0; - static u32 ATUC_PERF_LOSS=0; - static u32 ATUC_PERF_ESS=0; - static u32 ATUC_PERF_INITS=0; - static u32 ATUR_PERF_LOFS=0; - static u32 ATUR_PERF_LOSS=0; - static u32 ATUR_PERF_LPR=0; - static u32 ATUR_PERF_ESS=0; - static u32 ATUR_CHAN_RECV_BLK=0; - static u32 ATUR_CHAN_TX_BLK=0; - static u32 ATUR_CHAN_CORR_BLK=0; - static u32 ATUR_CHAN_UNCORR_BLK=0; - //RFC-3440 - static u32 ATUC_PERF_STAT_FASTR=0; - static u32 ATUC_PERF_STAT_FAILED_FASTR=0; - static u32 ATUC_PERF_STAT_SESL=0; - static u32 ATUC_PERF_STAT_UASL=0; - static u32 ATUR_PERF_STAT_SESL=0; - static u32 ATUR_PERF_STAT_UASL=0; - - static adslChanPrevTxRate PrevTxRate={0,0}; - static adslPhysCurrStatus CurrStatus={0,0}; - static ChanType chantype={0,0}; - static adslLineAlarmConfProfileEntry AlarmConfProfile={"No Name\0",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1}; -// 603221:tc.chen start - static adslFarEndPerfStats FarendStatsData; - struct timeval FarendData_acquire_time={0}; - static u32 adsl_mode,adsl_mode_extend; // adsl mode : adsl/ 2/ 2+ - static adslInitStats AdslInitStatsData; -//603221:tc.chen end -static u32 loop_diagnostics_mode=0; -static wait_queue_head_t wait_queue_loop_diagnostic; -#ifdef AMAZON_MEI_MIB_RFC3440 - static adslLineAlarmConfProfileExtEntry AlarmConfProfileExt={"No Name\0",0,0,0,0,0,0}; -#endif - -static int showtime=0; -static int loop_diagnostics_completed=0; -////////////////////////////////////////////////////////////////////////////////// -static int phy_mei_net_init(struct net_device * dev); -static int interleave_mei_net_init(struct net_device * dev); -static int fast_mei_net_init(struct net_device * dev); -static struct net_device_stats * phy_mei_net_get_stats(struct net_device * dev); -static struct net_device_stats * interleave_mei_net_get_stats(struct net_device * dev); -static struct net_device_stats * fast_mei_net_get_stats(struct net_device * dev); - -typedef struct mei_priv{ - struct net_device_stats stats; -}mei_priv; - -static struct net_device phy_mei_net = { init: phy_mei_net_init, name: "MEI_PHY"}; -static struct net_device interleave_mei_net = { init: interleave_mei_net_init, name: "MEI_INTL"}; -static struct net_device fast_mei_net = { init: fast_mei_net_init, name: "MEI_FAST"}; -/////////////////////////////////////////////////////////////////////////////////// - -static int major=AMAZON_MEI_MAJOR; - -static struct semaphore mei_sema; - -// Mei to ARC CMV count, reply count, ARC Indicator count -static int indicator_count=0; -static int cmv_count=0; -static int reply_count=0; -static u16 Recent_indicator[MSG_LENGTH]; - -// Used in interrupt handler as flags -static int arcmsgav=0; -static int cmv_reply=0; -static int cmv_waiting=0; - -#define PROC_ITEMS 8 - -long mei_debug_mode = 0; //509221:tc.chen for adsl firmware debug - -// to wait for arc cmv reply, sleep on wait_queue_arcmsgav; -static wait_queue_head_t wait_queue_arcmsgav; -static wait_queue_head_t wait_queue_codeswap; -static wait_queue_head_t wait_queue_mibdaemon; -static wait_queue_head_t wait_queue_reboot; -static u32 * image_buffer=NULL; // holding adsl firmware image -static u16 RxMessage[MSG_LENGTH]__attribute__ ((aligned(4))); -static u16 TxMessage[MSG_LENGTH]__attribute__ ((aligned(4))); -static u32 * mei_arc_swap_buff=NULL; // holding swap pages -static ARC_IMG_HDR * img_hdr; -static int reboot_flag; - -#ifdef DFE_LOOPBACK -#include "arc_pm.h" -#endif - - -///////////////// net device /////////////////////////////////////////////////// -static int phy_mei_net_init(struct net_device * dev) -{ - //ether_setup(dev); - dev->get_stats = phy_mei_net_get_stats; - dev->ip_ptr = NULL; - dev->type = 94; - -// dev->mtu=12345; - dev->flags=IFF_UP; - - dev->priv = kmalloc(sizeof(struct mei_priv), GFP_KERNEL); - if(dev->priv == NULL) - return -ENOMEM; - memset(dev->priv, 0, sizeof(struct mei_priv)); - return 0; -} - -static int interleave_mei_net_init(struct net_device * dev) -{ - //ether_setup(dev); - dev->get_stats = interleave_mei_net_get_stats; - dev->ip_ptr = NULL; - dev->type = 124; - dev->flags=IFF_UP; - dev->priv = kmalloc(sizeof(struct mei_priv), GFP_KERNEL); - if(dev->priv == NULL) - return -ENOMEM; - memset(dev->priv, 0, sizeof(struct mei_priv)); - return 0; -} - -static int fast_mei_net_init(struct net_device * dev) -{ - //ether_setup(dev); - dev->get_stats = fast_mei_net_get_stats; - dev->ip_ptr = NULL; - dev->type = 125; - dev->flags=IFF_UP; - dev->priv = kmalloc(sizeof(struct mei_priv), GFP_KERNEL); - if(dev->priv == NULL) - return -ENOMEM; - memset(dev->priv, 0, sizeof(struct mei_priv)); - return 0; -} - -static struct net_device_stats * phy_mei_net_get_stats(struct net_device * dev) -{ - struct mei_priv * priv; - priv = (struct mei_priv *)dev->priv; - // update statistics - (priv->stats).rx_packets = ATUR_CHAN_RECV_BLK; - (priv->stats).tx_packets = ATUR_CHAN_TX_BLK; - (priv->stats).rx_errors = ATUR_CHAN_CORR_BLK + ATUR_CHAN_UNCORR_BLK; - (priv->stats).rx_dropped = ATUR_CHAN_UNCORR_BLK; - - return &(priv->stats); -} - -static struct net_device_stats * interleave_mei_net_get_stats(struct net_device * dev) -{ - struct mei_priv * priv; - priv = (struct mei_priv *)dev->priv; - // update statistics - (priv->stats).rx_packets = ATUR_CHAN_RECV_BLK; - (priv->stats).tx_packets = ATUR_CHAN_TX_BLK; - (priv->stats).rx_errors = ATUR_CHAN_CORR_BLK + ATUR_CHAN_UNCORR_BLK; - (priv->stats).rx_dropped = ATUR_CHAN_UNCORR_BLK; - - return &(priv->stats); -} - -static struct net_device_stats * fast_mei_net_get_stats(struct net_device * dev) -{ - struct mei_priv * priv; - priv = (struct mei_priv *)dev->priv; - // update statistics - (priv->stats).rx_packets = ATUR_CHAN_RECV_BLK; - (priv->stats).tx_packets = ATUR_CHAN_TX_BLK; - (priv->stats).rx_errors = ATUR_CHAN_CORR_BLK + ATUR_CHAN_UNCORR_BLK; - (priv->stats).rx_dropped = ATUR_CHAN_UNCORR_BLK; - - return &(priv->stats); -} -///////////////// mei access Rd/Wr methods /////////////////////////////////////////////////// -void meiLongwordWrite(u32 ul_address, u32 ul_data) -{ - *((volatile u32 *)ul_address) = ul_data; - asm("SYNC"); - return; -} // end of "meiLongwordWrite(..." - -void meiLongwordRead(u32 ul_address, u32 *pul_data) -{ - *pul_data = *((volatile u32 *)ul_address); - asm("SYNC"); - return; -} // end of "meiLongwordRead(..." - -MEI_ERROR meiDMAWrite(u32 destaddr, u32 *databuff, u32 databuffsize) -{ - u32 *p = databuff; - u32 temp; - u32 flags; - - if( destaddr & 3) - return MEI_FAILURE; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Set the write transfer address - meiLongwordWrite(MEI_XFR_ADDR, destaddr); - - // Write the data pushed across DMA - while (databuffsize--) - { - temp = *p; - if(databuff==(u32 *)TxMessage) // swap half word - temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16); - meiLongwordWrite(MEI_DATA_XFR, temp); - p++; - } // end of "while(..." - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - return MEI_SUCCESS; - -} // end of "meiDMAWrite(..." - -MEI_ERROR meiDMAWrite_16(u32 destaddr, u32 *databuff, u32 databuffsize) -{ - u32 *p = databuff; - u32 temp; - u32 flags; - - if( destaddr & 3) - return MEI_FAILURE; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Set the write transfer address - meiLongwordWrite(MEI_XFR_ADDR, destaddr); - - // Write the data pushed across DMA - while (databuffsize--) - { - temp = *p; - temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);//swap half word - meiLongwordWrite(MEI_DATA_XFR, temp); - p++; - } // end of "while(..." - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - return MEI_SUCCESS; - -} // end of "meiDMAWrite_16(..." - -MEI_ERROR meiDMAWrite_8(u32 destaddr, u32 *databuff, u32 databuffsize) -{ - u32 *p = databuff; - u32 temp; - u32 flags; - - if( destaddr & 3) - return MEI_FAILURE; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Set the write transfer address - meiLongwordWrite(MEI_XFR_ADDR, destaddr); - - // Write the data pushed across DMA - while (databuffsize--) - { - temp = *p; - temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte - meiLongwordWrite(MEI_DATA_XFR, temp); - p++; - } // end of "while(..." - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - return MEI_SUCCESS; - -} // end of "meiDMAWrite_8(..." - -MEI_ERROR meiDMARead(u32 srcaddr, u32 *databuff, u32 databuffsize) -{ - u32 *p = databuff; - u32 temp; - u32 flags; - - if( srcaddr & 3) - return MEI_FAILURE; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Set the read transfer address - meiLongwordWrite(MEI_XFR_ADDR, srcaddr); - - // Read the data popped across DMA - while (databuffsize--) - { - meiLongwordRead(MEI_DATA_XFR, &temp); - if(databuff==(u32 *)RxMessage) // swap half word - temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16); - *p=temp; - p++; - } // end of "while(..." - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - return MEI_SUCCESS; - -} // end of "meiDMARead(..." - -MEI_ERROR meiDMARead_16(u32 srcaddr, u32 *databuff, u32 databuffsize) -{ - u32 *p = databuff; - u32 temp; - u32 flags; - - if( srcaddr & 3) - return MEI_FAILURE; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Set the read transfer address - meiLongwordWrite(MEI_XFR_ADDR, srcaddr); - - // Read the data popped across DMA - while (databuffsize--) - { - meiLongwordRead(MEI_DATA_XFR, &temp); - temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16); - *p=temp; - p++; - } // end of "while(..." - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - return MEI_SUCCESS; - -} // end of "meiDMARead_16(..." - -MEI_ERROR meiDMARead_8(u32 srcaddr, u32 *databuff, u32 databuffsize) -{ - u32 *p = databuff; - u32 temp; - u32 flags; - - if( srcaddr & 3) - return MEI_FAILURE; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Set the read transfer address - meiLongwordWrite(MEI_XFR_ADDR, srcaddr); - - // Read the data popped across DMA - while (databuffsize--) - { - meiLongwordRead(MEI_DATA_XFR, &temp); - temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte - *p=temp; - p++; - } // end of "while(..." - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - return MEI_SUCCESS; - -} // end of "meiDMARead_8(..." - -void meiPollForDbgDone(void) -{ - u32 query = 0; - int i=0; - while (i<WHILE_DELAY) - { - meiLongwordRead(ARC_TO_MEI_INT, &query); - query &= (ARC_TO_MEI_DBG_DONE); - if(query) - break; - i++; - if(i==WHILE_DELAY){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n PollforDbg fail"); -#endif - } - DEBUG_ACCESS_DELAY; - } - meiLongwordWrite(ARC_TO_MEI_INT, ARC_TO_MEI_DBG_DONE); // to clear this interrupt -} // end of "meiPollForDbgDone(..." - -MEI_ERROR meiDebugWrite_8(u32 destaddr, u32 *databuff, u32 databuffsize) -{ - u32 i; - u32 temp = 0x0; - u32 address = 0x0; - u32 *buffer = 0x0; - u32 flags; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Open the debug port before DMP memory write - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp |= (HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK); - DEBUG_ACCESS_DELAY; - - // For the requested length, write the address and write the data - address = destaddr; - buffer = databuff; - for (i=0; i < databuffsize; i++) - { - meiLongwordWrite(MEI_DEBUG_WAD, address); - DEBUG_ACCESS_DELAY; - temp=*buffer; - temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte - meiLongwordWrite(MEI_DEBUG_DATA, temp); - DEBUG_ACCESS_DELAY; - meiPollForDbgDone(); - address += 4; - buffer++; - } // end of "for(..." - - // Close the debug port after DMP memory write - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp &= ~(HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - // Return - return MEI_SUCCESS; - -} // end of "meiDebugWrite_8(..." - -MEI_ERROR meiDebugRead_8(u32 srcaddr, u32 *databuff, u32 databuffsize) -{ - u32 i; - u32 temp = 0x0; - u32 address = 0x0; - u32 *buffer = 0x0; - u32 flags; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Open the debug port before DMP memory read - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp |= (HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP2_MASK); - DEBUG_ACCESS_DELAY; - - // For the requested length, write the address and read the data - address = srcaddr; - buffer = databuff; - for (i=0; i<databuffsize; i++) - { - meiLongwordWrite(MEI_DEBUG_RAD, address); - DEBUG_ACCESS_DELAY; - meiPollForDbgDone(); - meiLongwordRead(MEI_DEBUG_DATA, &temp); - DEBUG_ACCESS_DELAY; - temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte - *buffer=temp; - address += 4; - buffer++; - } // end of "for(..." - - // Close the debug port after DMP memory read - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp &= ~(HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - // Return - return MEI_SUCCESS; - -} // end of "meiDebugRead_8(..." - -MEI_ERROR meiDebugWrite_16(u32 destaddr, u32 *databuff, u32 databuffsize) -{ - u32 i; - u32 temp = 0x0; - u32 address = 0x0; - u32 *buffer = 0x0; - u32 flags; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Open the debug port before DMP memory write - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp |= (HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK); - DEBUG_ACCESS_DELAY; - - // For the requested length, write the address and write the data - address = destaddr; - buffer = databuff; - for (i=0; i < databuffsize; i++) - { - meiLongwordWrite(MEI_DEBUG_WAD, address); - DEBUG_ACCESS_DELAY; - temp=*buffer; - temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);//swap half word - meiLongwordWrite(MEI_DEBUG_DATA, temp); - DEBUG_ACCESS_DELAY; - meiPollForDbgDone(); - address += 4; - buffer++; - } // end of "for(..." - - // Close the debug port after DMP memory write - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp &= ~(HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - // Return - return MEI_SUCCESS; - -} // end of "meiDebugWrite_16(..." - -MEI_ERROR meiDebugRead_16(u32 srcaddr, u32 *databuff, u32 databuffsize) -{ - u32 i; - u32 temp = 0x0; - u32 address = 0x0; - u32 *buffer = 0x0; - u32 flags; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Open the debug port before DMP memory read - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp |= (HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP2_MASK); - DEBUG_ACCESS_DELAY; - - // For the requested length, write the address and read the data - address = srcaddr; - buffer = databuff; - for (i=0; i<databuffsize; i++) - { - meiLongwordWrite(MEI_DEBUG_RAD, address); - DEBUG_ACCESS_DELAY; - meiPollForDbgDone(); - meiLongwordRead(MEI_DEBUG_DATA, &temp); - DEBUG_ACCESS_DELAY; - temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);//swap half word - *buffer=temp; - address += 4; - buffer++; - } // end of "for(..." - - // Close the debug port after DMP memory read - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp &= ~(HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - // Return - return MEI_SUCCESS; - -} // end of "meiDebugRead_16(..." - -MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize) -{ - u32 i; - u32 temp = 0x0; - u32 address = 0x0; - u32 *buffer = 0x0; - u32 flags; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Open the debug port before DMP memory write - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp |= (HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK); - DEBUG_ACCESS_DELAY; - - // For the requested length, write the address and write the data - address = destaddr; - buffer = databuff; - for (i=0; i < databuffsize; i++) - { - meiLongwordWrite(MEI_DEBUG_WAD, address); - DEBUG_ACCESS_DELAY; - temp=*buffer; - meiLongwordWrite(MEI_DEBUG_DATA, temp); - DEBUG_ACCESS_DELAY; - meiPollForDbgDone(); - address += 4; - buffer++; - } // end of "for(..." - - // Close the debug port after DMP memory write - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp &= ~(HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - // Return - return MEI_SUCCESS; - -} // end of "meiDebugWrite(..." - -MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize) -{ - u32 i; - u32 temp = 0x0; - u32 address = 0x0; - u32 *buffer = 0x0; - u32 flags; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Open the debug port before DMP memory read - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp |= (HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP2_MASK); - DEBUG_ACCESS_DELAY; - - // For the requested length, write the address and read the data - address = srcaddr; - buffer = databuff; - for (i=0; i<databuffsize; i++) - { - meiLongwordWrite(MEI_DEBUG_RAD, address); - DEBUG_ACCESS_DELAY; - meiPollForDbgDone(); - meiLongwordRead(MEI_DEBUG_DATA, &temp); - DEBUG_ACCESS_DELAY; - *buffer=temp; - address += 4; - buffer++; - } // end of "for(..." - - // Close the debug port after DMP memory read - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp &= ~(HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - // Return - return MEI_SUCCESS; - -} // end of "meiDebugRead(..." -EXPORT_SYMBOL(meiDebugRead); - -void meiMailboxInterruptsDisable(void) -{ - meiLongwordWrite(ARC_TO_MEI_INT_MASK, 0x0); -} // end of "meiMailboxInterruptsDisable(..." - -void meiMailboxInterruptsEnable(void) -{ - meiLongwordWrite(ARC_TO_MEI_INT_MASK, MSGAV_EN); -} // end of "meiMailboxInterruptsEnable(..." - -MEI_ERROR meiMailboxWrite(u16 *msgsrcbuffer, u16 msgsize) -{ - int i; - u32 arc_mailbox_status = 0x0; - u32 temp=0; - MEI_ERROR meiMailboxError = MEI_SUCCESS; - - // Check arc if mailbox write can be initiated -/* meiLongwordRead(MEI_TO_ARC_INT, &arc_mailbox_status); - if ((arc_mailbox_status & MEI_TO_ARC_MSGAV)) - { - return MEI_MAILBOX_FULL; - } -*/ - // Write to mailbox - meiMailboxError = meiDMAWrite(MEI_TO_ARC_MAILBOX, (u32*)msgsrcbuffer, msgsize/2); - meiMailboxError = meiDMAWrite(MEI_TO_ARC_MAILBOXR, (u32 *)(&temp), 1); - - // Notify arc that mailbox write completed - cmv_waiting=1; - meiLongwordWrite(MEI_TO_ARC_INT, MEI_TO_ARC_MSGAV); - - i=0; - while(i<WHILE_DELAY){ // wait for ARC to clear the bit - meiLongwordRead(MEI_TO_ARC_INT, &arc_mailbox_status); - if((arc_mailbox_status & MEI_TO_ARC_MSGAV) != MEI_TO_ARC_MSGAV) - break; - i++; - if(i==WHILE_DELAY){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n MEI_TO_ARC_MSGAV not cleared by ARC"); -#endif - meiMailboxError = MEI_FAILURE; -#if 0 - for(i=0;i<msgsize;i++) - printk("\n %8x", (*(msgsrcbuffer+i))); -#endif - } - } - - // Return - return meiMailboxError; - -} // end of "meiMailboxWrite(..." - -MEI_ERROR meiMailboxRead(u16 *msgdestbuffer, u16 msgsize) -{ - //u32 arc_mailbox_status = 0x0; - //u32 *mei_arc_msgbuff = 0x0; - MEI_ERROR meiMailboxError = MEI_SUCCESS; - - /* - // Check arc if mailbox read can be initiated - meiLongwordRead(ARC_TO_MEI_INT, &arc_mailbox_status); - if ((arc_mailbox_status & ARC_TO_MEI_MSGAV) == 0) - { - return MEI_MAILBOX_EMPTY; - } // end of "if(..." - */ - - // Read from mailbox - meiMailboxError = meiDMARead(ARC_TO_MEI_MAILBOX, (u32*)msgdestbuffer, msgsize/2); - - // Notify arc that mailbox read completed - meiLongwordWrite(ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV); - - // Return - return meiMailboxError; - -} // end of "meiMailboxRead(..." - -MEI_ERROR meiHaltArc(void) -{ - u32 arc_control_mode = 0x0; - u32 arc_debug_addr = 0x5; - u32 arc_debug_data = 0x0; - - // Switch arc control from JTAG mode to MEI mode- write '1' to bit0 - meiLongwordRead(MEI_CONTROL, &arc_control_mode); - arc_control_mode |= (HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, arc_control_mode); - - // Write arc aux reg access mask (0x0) into debug addr decode reg - meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_AUX_MASK); - - // Write arc debug reg addr (0x5) into debug read addr reg - meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr); - meiPollForDbgDone(); - - // Read debug data reg and save content - meiLongwordRead(MEI_DEBUG_DATA, &arc_debug_data); - - // Write arc debug reg addr (0x5) into debug write addr reg - meiLongwordWrite(MEI_DEBUG_WAD, arc_debug_addr); - - // Write debug data reg with content ORd with 0x2 (halt bit set) - arc_debug_data |= (BIT1); - meiLongwordWrite(MEI_DEBUG_DATA, arc_debug_data); - meiPollForDbgDone(); - - // Switch arc control from MEI mode to JTAG mode- write '0' to bit0 - meiLongwordRead(MEI_CONTROL, &arc_control_mode); - arc_control_mode &= ~(HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, arc_control_mode); - - // Return - return MEI_SUCCESS; - -} // end of "meiHalt(..." - -MEI_ERROR meiDownloadBootCode(void) -{ - u32 arc_control_mode; - u32 boot_loop; - u32 page_size; - u32 dest_addr; - - u32 arc_debug_addr = 0x31F00; - u32 arc_debug_data = 0x10; - u32 temp; -// int i; - - //MEI_ERROR meiDMAError = MEI_SUCCESS; - - // Disable mask for arc codeswap interrupts - meiMailboxInterruptsDisable(); - - // Switch arc control from JTAG mode to MEI mode- write '1' to bit0 - meiLongwordRead(MEI_CONTROL, &arc_control_mode); - arc_control_mode |= (HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, arc_control_mode); - - // Write (0x10) to CRI_CCR0(0x31F00) to enable ac_clk signal - meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK); - meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr); - meiPollForDbgDone(); - meiLongwordRead(MEI_DEBUG_DATA, &temp); - temp |=arc_debug_data; - - meiLongwordWrite(MEI_DEBUG_WAD, arc_debug_addr); - meiLongwordWrite(MEI_DEBUG_DATA, temp); - meiPollForDbgDone(); - //meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_AUX_MASK); - - // Switch arc control from MEI mode to JTAG mode- write '0' to bit0 - meiLongwordRead(MEI_CONTROL, &arc_control_mode); - arc_control_mode &= ~(HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, arc_control_mode); - -#ifdef AMAZON_MEI_DEBUG_ON //to test ac_clk setting correctness - meiLongwordRead(MEI_CONTROL, &arc_control_mode); - arc_control_mode |= (HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, arc_control_mode); - - meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK); - meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr); - meiPollForDbgDone(); - meiLongwordRead(MEI_DEBUG_DATA, &arc_debug_data); - - meiLongwordRead(MEI_CONTROL, &arc_control_mode); - arc_control_mode &= ~(HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, arc_control_mode); - -// printk("\n\n ac_clk is %8x\n", arc_debug_data); -#endif - - /* - ** DMA the boot code page(s) - */ -#ifdef AMAZON_MEI_DEBUG_ON -// printk("\n\n start download pages"); -#endif - for( boot_loop = 0; boot_loop < img_hdr->count; boot_loop++) - { - if( img_hdr->page[boot_loop].p_size & BOOT_FLAG) - { - page_size = meiGetPage( boot_loop, GET_PROG, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr); - if( page_size > 0) - { - meiDMAWrite(dest_addr, mei_arc_swap_buff, page_size); - } - } - if( img_hdr->page[boot_loop].d_size & BOOT_FLAG) - { - page_size = meiGetPage( boot_loop, GET_DATA, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr); - if( page_size > 0) - { - meiDMAWrite( dest_addr, mei_arc_swap_buff, page_size); - } - } - } -#ifdef AMAZON_MEI_DEBUG_ON -// printk("\n\n pages downloaded"); -#endif - return MEI_SUCCESS; - -} // end of "meiDownloadBootCode(..." - -MEI_ERROR meiRunArc(void) -{ - u32 arc_control_mode = 0x0; - u32 arc_debug_addr = 0x0; - u32 arc_debug_data = 0x0; - - // Switch arc control from JTAG mode to MEI mode- write '1' to bit0 - meiLongwordRead(MEI_CONTROL, &arc_control_mode); - arc_control_mode |= (HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, arc_control_mode); - - // Write arc aux reg access mask (0x0) into debug addr decode reg - meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_AUX_MASK); - - // Write arc status aux reg addr (0x0) into debug read addr reg - meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr); - meiPollForDbgDone(); - - // Read debug data reg and save content - meiLongwordRead(MEI_DEBUG_DATA, &arc_debug_data); - - // Write arc status aux reg addr (0x0) into debug write addr reg - meiLongwordWrite(MEI_DEBUG_WAD, arc_debug_addr); - - // Write debug data reg with content ANDd with 0xFDFFFFFF (halt bit cleared) - arc_debug_data &= ~(BIT25); - meiLongwordWrite(MEI_DEBUG_DATA, arc_debug_data); - meiPollForDbgDone(); - - // Switch arc control from MEI mode to JTAG mode- write '0' to bit0 - meiLongwordRead(MEI_CONTROL, &arc_control_mode); - arc_control_mode &= ~(HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, arc_control_mode); - - // Enable mask for arc codeswap interrupts - meiMailboxInterruptsEnable(); - - // Return - return MEI_SUCCESS; - -} // end of "meiActivate(..." - -int meiGetPage( u32 Page, u32 data, u32 MaxSize, u32 *Buffer, u32 *Dest) -{ - u32 size; - u32 i; - u32 *p; - - if( Page > img_hdr->count) - return -2; - - /* - ** Get program or data size, depending on "data" flag - */ - size = (data == GET_DATA) ? img_hdr->page[ Page].d_size : img_hdr->page[ Page].p_size; - - size &= BOOT_FLAG_MASK; // Clear boot bit! - if( size > MaxSize) - return -1; - - if( size == 0) - return 0; - /* - ** Get program or data offset, depending on "data" flag - */ - i = data ? img_hdr->page[ Page].d_offset : img_hdr->page[ Page].p_offset; - - /* - ** Copy data/program to buffer - */ - - i /= 4; // Adjust offset for byte-to-UINT for array operation - - p = (u32 *)img_hdr + i; - for(i = 0; i < size; i++) - Buffer[i] = *p++; - /* - ** Pass back data/program destination address - */ - *Dest = data ? img_hdr->page[Page].d_dest : img_hdr->page[Page].p_dest; - - return size; -} - -MEI_ERROR meiCMV(u16 * request, int reply) // write cmv to arc, if reply needed, wait for reply -{ - MEI_ERROR meierror; - wait_queue_t wait; - - cmv_reply=reply; - - meierror = meiMailboxWrite(request, MSG_LENGTH); - - if(meierror != MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n MailboxWrite Fail."); -#endif - return meierror; - } - else{ - cmv_count++; - } - - if(cmv_reply == NO_REPLY) - return MEI_SUCCESS; - - init_waitqueue_entry(&wait, current); - add_wait_queue(&wait_queue_arcmsgav, &wait); - set_current_state(TASK_INTERRUPTIBLE); -// cmv_waiting=1; - - if(arcmsgav==1){ - set_current_state(TASK_RUNNING); - remove_wait_queue(&wait_queue_arcmsgav, &wait); - } - else{ - schedule_timeout(CMV_TIMEOUT); - remove_wait_queue(&wait_queue_arcmsgav, &wait); - } - if(arcmsgav==0){//CMV_timeout - cmv_waiting=0; - arcmsgav=0; -#ifdef AMAZON_MEI_DEBUG_ON - printk("\nmeiCMV: MEI_MAILBOX_TIMEOUT\n"); -#endif - return MEI_MAILBOX_TIMEOUT; - } - else{ - arcmsgav=0; - reply_count++; - return MEI_SUCCESS; - } -} - -//TODO, for loopback test -#ifdef DFE_LOOPBACK -#define mte_reg_base (0x4800*4+0x20000) - -/* Iridia Registers Address Constants */ -#define MTE_Reg(r) (int)(mte_reg_base + (r*4)) - -#define IT_AMODE MTE_Reg(0x0004) - - -#define OMBOX_BASE 0x15F80 -#define IMBOX_BASE 0x15FC0 - -#define TIMER_DELAY (1024) -#define BC0_BYTES (32) -#define BC1_BYTES (30) -#define NUM_MB (12) -#define TIMEOUT_VALUE 2000 - -void BFMWait (u32 cycle) { - u32 i; - for (i = 0 ; i< cycle ; i++); -} - -void WriteRegLong(u32 addr, u32 data){ - //printk("[%8x] <= %8x \n\n", addr, data); - *((volatile u32 *)(addr)) = data; -} - -u32 ReadRegLong (u32 addr) { - u32 rd_val; - - rd_val = *((volatile u32 *)(addr)); - //printk("[%8x] => %8x \n\n", addr, rd_val); - return rd_val; - -} - -/* This routine writes the mailbox with the data in an input array */ -void WriteMbox(u32 *mboxarray,u32 size) { - u32 i; - - WriteRegLong(MEI_XFR_ADDR,IMBOX_BASE); - for (i=0;i<size;i++) { - WriteRegLong(MEI_DATA_XFR,*(mboxarray+i)); - } -} - -/* This routine reads the output mailbox and places the results into an array */ -void ReadMbox(u32 *mboxarray,u32 size) { - u32 i; - - WriteRegLong(MEI_XFR_ADDR,OMBOX_BASE); - for (i=0;i<size;i++) { - mboxarray[i] = ReadRegLong(MEI_DATA_XFR); - } -} - -void MEIWriteARCValue(u32 address, u32 value) -{ - u32 i,check = 0; - /* Write address register */ - *((volatile u32 *)MEI_DEBUG_WAD) = address; - - /* Write data register */ - *((volatile u32 *)MEI_DEBUG_DATA) = value; - - /* wait until complete - timeout at 40*/ - for (i=0;i<40;i++) { - check = *((volatile u32 *)ARC_TO_MEI_INT); - if ((check & 0x20)) break; - //printk("MEIWriteARCValue: check:%8x\n\n", check); - } - - /* clear the flag */ - *((volatile u32 *)ARC_TO_MEI_INT) = 0x20; - -} - - -void post_mei_init(void) -{ -u32 mailbox[NUM_MB]; - - mailbox[0] = TIMER_DELAY; - - /* set bytes per bearer channel */ - mailbox[1] = BC0_BYTES; - mailbox[2] = BC1_BYTES; - WriteMbox(mailbox, 3); - - WriteRegLong(AAI_ACCESS, 0x00000001); - - /* enable ADSL block clock, ac_clk */ - WriteRegLong(MEI_CONTROL, 0x01); - WriteRegLong(MEI_DEBUG_DEC, 0x00000001); // select ld/st space - MEIWriteARCValue(0x31F00, 0x00000010); // write CRI_CCR0 to enable ac_clk - - /* set the MTE to register start */ - MEIWriteARCValue(IT_AMODE, 0xF); - BFMWait(10); -} - - -int wait_sync(void) -{ -u32 mailbox[NUM_MB]; - /* wait for ATM sync to be achieved on both BC0 and BC1 */ - u32 timeout=0; - ReadMbox(mailbox, 1); - u32 readval = mailbox[0]; - while( ((readval & 0xFFFFFFFF) == 0) && (timeout < TIMEOUT_VALUE) ) { - BFMWait(1); - //printk("wait_sync\n\n"); - ReadMbox(mailbox, 1); - readval = mailbox[0]; - timeout++; - } - if(timeout == TIMEOUT_VALUE)return 0; - else return 1; -} -#endif //DFE_LOOPBACK -//end of TODO, for loopback test - -MEI_ERROR meiForceRebootAdslModem(void) -{ -#if 0 -//#ifdef ARC_READY_ACK - if(down_interruptible(&mei_sema)) //disable CMV access until ARC ready - { - return -ERESTARTSYS; - } -#endif - if(reboot_firsttime==1){//000002:fchang Start - // reset ARC - *((volatile u32 *)0xB0100910) = 0x80; //reset DFE - asm("SYNC"); - *((volatile u32 *)0xB0100910) = 0x0; - asm("SYNC"); - if((*((volatile u32 *)0xB0100910))!=0x0) -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n reset DFE fail"); -#endif - - // reset ARC - meiLongwordWrite(MEI_CONTROL, SOFT_RESET); - asm("SYNC"); - meiLongwordWrite(MEI_CONTROL, 0); - asm("SYNC"); - - } //000002:fchang End -#ifdef DFE_LOOPBACK - img_hdr=(ARC_IMG_HDR *)lp_image; -#else - img_hdr=(ARC_IMG_HDR *)image_buffer; -#endif -// printk("\n\n enter haltarc"); - meiHaltArc(); -// printk("\n\n haltarc done"); -//000002:fchang Start - if(reboot_firsttime==0){ - printk("\n\n new reboot"); - meiResetArc(); - meiResetCore(); - } - if(reboot_firsttime==1) - meiDownloadBootCode(); - else - mei_ioctl((struct inode *)NULL, (struct file *)NULL, AMAZON_MEI_DOWNLOAD, (unsigned long)NULL); - -//000002:fchang End -#ifdef AMAZON_MEI_DEBUG_ON -// printk("\n\n Download Done"); -#endif - -#ifdef DFE_LOOPBACK - post_mei_init(); -#endif - -// sema_init(&mei_sema, 1); - //up(&mei_sema); - -// enable_irq(AMAZON_MEI_INT); - - meiRunArc(); -//000002:fchang Start - if(reboot_firsttime==0){ - meiEnalbeMailboxInt(); - } -//000002:fchang End - -#ifdef AMAZON_MEI_DEBUG_ON -// printk("\n\n ARC Running"); -#endif - -#ifdef AMAZON_MEI_DEBUG_ON //to test ac_clk setting correctness - { - u32 arc_control_mode; - u32 arc_debug_addr = 0x31F00; - u32 arc_debug_data = 0x10; - meiLongwordRead(MEI_CONTROL, &arc_control_mode); - arc_control_mode |= (HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, arc_control_mode); - - meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK); - meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr); - meiPollForDbgDone(); - meiLongwordRead(MEI_DEBUG_DATA, &arc_debug_data); - - meiLongwordRead(MEI_CONTROL, &arc_control_mode); - arc_control_mode &= ~(HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, arc_control_mode); - -// printk("\n\n ac_clk is %8x\n", arc_debug_data); - } -#endif - - -#ifdef DFE_LOOPBACK - if (wait_sync() == 0){ - printk("ARC fails to run: time out\n\n"); - }else{ -// printk("ARC is ready\n\n"); - } -#endif - if(reboot_firsttime==1) //000002:fchang - reboot_firsttime=0; //000002:fchang - - return MEI_SUCCESS; -} - -//////////////////// procfs debug //////////////////////////////////////////////////////// -#define MEI_DIRNAME "mei" -static struct proc_dir_entry *meidir; - -static ssize_t proc_write(struct file *, const char *, size_t, loff_t *); -static ssize_t proc_read(struct file *, char *, size_t, loff_t *); - -static struct file_operations proc_operations = { - read: proc_read, - write: proc_write, -}; - -typedef struct reg_entry { - int * flag; - char name[30]; // big enough to hold names - char description[100]; // big enough to hold description - unsigned short low_ino; -} reg_entry_t; - -static reg_entry_t regs[PROC_ITEMS]; // total items to be monitored by /proc/mei - -#define NUM_OF_REG_ENTRY (sizeof(regs)/sizeof(reg_entry_t)) - -static int proc_read(struct file * file, char * buf, size_t nbytes, loff_t *ppos) -{ - int i_ino = (file->f_dentry->d_inode)->i_ino; - char outputbuf[64]; - int count=0; - int i; - u32 version=0; - reg_entry_t* current_reg=NULL; - - for (i=0;i<NUM_OF_REG_ENTRY;i++) { - if (regs[i].low_ino==i_ino) { - current_reg = ®s[i]; - break; - } - } - if (current_reg==NULL) - return -EINVAL; - - if (current_reg->flag == (int *) 8){ - ///proc/mei/version - //format: - //Firmware version: major.minor.sub_version.int_version.rel_state.spl_appl - //Firmware Date Time Code: date/month min:hour - if (*ppos>0) /* Assume reading completed in previous read*/ - return 0; // indicates end of file - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - //if (indicator_count != 1){ - if (indicator_count < 1){ - up(&mei_sema); - return -EAGAIN; - } - //major:bits 0-7 - //minor:bits 8-15 - makeCMV(H2D_CMV_READ, INFO, 54, 0, 1, NULL); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#if 0 -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n WINHOST CMV fail"); -#endif -#endif - up(&mei_sema); - return -EIO; - } - version = RxMessage[4]; - count = sprintf(outputbuf, "%d.%d.",(version)&0xff,(version>>8)&0xff); - - //sub_version:bits 4-7 - //int_version:bits 0-3 - //spl_appl:bits 8-13 - //rel_state:bits 14-15 - makeCMV(H2D_CMV_READ, INFO, 54, 1, 1, NULL); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#if 0 -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n WINHOST CMV fail"); -#endif -#endif - up(&mei_sema); - return -EFAULT; - } - version =RxMessage[4]; - count += sprintf(outputbuf+count, "%d.%d.%d.%d", - (version>>4)&0xf, - version&0xf, - (version>>14)&0x3, - (version>>8)&0x3f); -#ifdef ADSL_LED_SUPPORT -// version check -start for adsl led - if ((((version>>4)&0xf)==2)&&((version&0xf)>=3)&&((version&0xf)<7)) firmware_support_led=1; - else if ((((version>>4)&0xf)==2)&&((version&0xf)>=7)) firmware_support_led=2; - else if (((version>>4)&0xf)>2) firmware_support_led=2; - -//165001:henryhsu:20050906:Modify for adsl firmware version 1.2.1.2.0.1 DATA_LED can't flash. - //else firmware_support_led=0; - else firmware_support_led=2; -//165001 - - -// version check -end -#endif - //Date:bits 0-7 - //Month:bits 8-15 - makeCMV(H2D_CMV_READ, INFO, 55, 0, 1, NULL); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#if 0 -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n WINHOST CMV fail"); -#endif -#endif - up(&mei_sema); - return -EIO; - } - version = RxMessage[4]; - - //Hour:bits 0-7 - //Minute:bits 8-15 - makeCMV(H2D_CMV_READ, INFO, 55, 1, 1, NULL); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#if 0 -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n WINHOST CMV fail"); -#endif -#endif - up(&mei_sema); - return -EFAULT; - } - version += (RxMessage[4]<<16); - count += sprintf(outputbuf+count, " %d/%d %d:%d\n" - ,version&0xff - ,(version>>8)&0xff - ,(version>>25)&0xff - ,(version>>16)&0xff); - - up(&mei_sema); - - *ppos+=count; - }else if(current_reg->flag != (int *)Recent_indicator){ - if (*ppos>0) /* Assume reading completed in previous read*/ - return 0; // indicates end of file - count = sprintf(outputbuf, "0x%08X\n\n", *(current_reg->flag)); - *ppos+=count; - if (count>nbytes) /* Assume output can be read at one time */ - return -EINVAL; - }else{ - if((int)(*ppos)/((int)7)==16) - return 0; // indicate end of the message - count = sprintf(outputbuf, "0x%04X\n\n", *(((u16 *)(current_reg->flag))+ (int)(*ppos)/((int)7))); - *ppos+=count; - } - if (copy_to_user(buf, outputbuf, count)) - return -EFAULT; - return count; -} - -static ssize_t proc_write(struct file * file, const char * buffer, size_t count, loff_t *ppos) -{ - int i_ino = (file->f_dentry->d_inode)->i_ino; - reg_entry_t* current_reg=NULL; - int i; - unsigned long newRegValue; - char *endp; - - for (i=0;i<NUM_OF_REG_ENTRY;i++) { - if (regs[i].low_ino==i_ino) { - current_reg = ®s[i]; - break; - } - } - if ((current_reg==NULL) || (current_reg->flag == (int *)Recent_indicator)) - return -EINVAL; - - newRegValue = simple_strtoul(buffer,&endp,0); - *(current_reg->flag)=(int)newRegValue; - return (count+endp-buffer); -} -////////////////makeCMV(Opcode, Group, Address, Index, Size, Data), CMV in u16 TxMessage[MSG_LENGTH]/////////////////////////// -void makeCMV(u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data) -{ - memset(TxMessage, 0, MSG_LENGTH*2); - TxMessage[0]= (opcode<<4) + (size&0xf); - TxMessage[1]= (((index==0)?0:1)<<7) + (group&0x7f); - TxMessage[2]= address; - TxMessage[3]= index; - if(opcode == H2D_CMV_WRITE) - memcpy(TxMessage+4, data, size*2); - return; -} - -////////////////makeCMV(Opcode, Group, Address, Index, Size, Data), CMV in u16 TxMessage[MSG_LENGTH]/////////////////////////// -void makeCMV_local(u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data,u16 *CMVMSG) -{ - memset(CMVMSG, 0, MSG_LENGTH*2); - CMVMSG[0]= (opcode<<4) + (size&0xf); - CMVMSG[1]= (((index==0)?0:1)<<7) + (group&0x7f); - CMVMSG[2]= address; - CMVMSG[3]= index; - if(opcode == H2D_CMV_WRITE) - memcpy(CMVMSG+4, data, size*2); - return; -} - -//////////////// Driver Structure ///////////////////////////////////////////////////////////////////////////// -static ssize_t mei_write(struct file *, const char *, size_t, loff_t *); -static int mei_ioctl(struct inode *, struct file *, unsigned int, unsigned long); - -static struct file_operations mei_operations = { - write: mei_write, - ioctl: mei_ioctl, -}; - - -static ssize_t mei_write(struct file * filp, const char * buf, size_t size, loff_t * loff) -{ -// printk("\n\n mei_write entered"); -// image_buffer = (u32 *)kmalloc(size, GFP_KERNEL); - image_buffer = (u32 *)vmalloc(size); -// printk("\n\n image_buffer kmalloc done"); - if(image_buffer == NULL){ -#ifdef AMAZON_MEI_DEBUG_ON -// printk("\n\n kmalloc for firmware image fail"); - printk("\n\n vmalloc for firmware image fail"); -#endif - return -1; - } - copy_from_user((char *)image_buffer, buf, size); -// printk("\n\n copy_from_user done"); - return size; -} - - ////////// ISR GPTU Timer 6 for high resolution timer ///////////// -void amazon_timer6_interrupt_MEI(int irq, void *dev_id, struct pt_regs *regs) -{ - int i,j; - u32 temp; - u16 temp16; - u16 rdindex, wrindex; - u16 num_rd=0; //num of byte can be read - u16 bytes_to_wr=0; - -// printk("\n\nenter timer\n\n"); - irqtimes++; -// printk("\n%d\n",irqtimes); - - -/* -#ifdef PCM_ACCESS_DEBUG - meiDebugRead_8(0x30f20, &temp, 1); -#else - meiDMARead_8(0x30f20, &temp, 1); -#endif - if((temp&0x4000)!=0){ - printk("\nER_ERR"); -#ifdef PCM_ACCESS_DEBUG - meiDebugWrite_8(0x30f20, &temp, 1); -#else - meiDMAWrite_8(0x30f20, &temp, 1); -#endif -#ifdef PCM_ACCESS_DEBUG - meiDebugRead_8(0x30f20, &temp, 1); -#else - meiDMARead_8(0x30f20, &temp, 1); -#endif - if((temp&0x4000)!=0) - printk("\nER_ERR not cleared"); - } -*/ - - for(i=PCM_CHANNEL_NUM-1;i>=0;i--){// start from last channel, which is rx -#ifdef PCM_ACCESS_DEBUG - meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1); -#else - meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1); -#endif - wrindex = (u16)((temp & 0xffff0000)>>16); -// printk(" %d",wrindex); -#ifdef PCM_ACCESS_DEBUG - meiDebugRead_16(pcm_start_addr+i*16+8, &temp, 1); -#else - meiDMARead_16(pcm_start_addr+i*16+8, &temp, 1); -#endif - rdindex = (u16)(temp & 0xffff); -// printk(" %d",rdindex); - if(rdindex<=wrindex) - num_rd=((wrindex-rdindex)/4)*4; //read multiply of 4 bytes - else - num_rd=((pcm_data[i].len-(rdindex-wrindex))/4)*4; //read multiply of 4 bytes - - if(i%2!=0){//rx channel - pcm_data[i].point=0; - for(j=0;j<num_rd/4;j++){ - if(pcm_data[i].finish!=1){ - if((rdindex+j*4)>=pcm_data[i].len) - temp16=(rdindex+j*4) - pcm_data[i].len; - else - temp16=rdindex+j*4; -#ifdef PCM_ACCESS_DEBUG - meiDebugRead_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16, (u32*)(pcm_data[i].buff+pcm_data[i].point), 1); -#else - meiDMARead_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16, (u32*)(pcm_data[i].buff+pcm_data[i].point), 1); -#endif - // printk(" %8x", *((u32*)(pcm_data[i].buff+pcm_data[i].point))); - /* if(pcm_data[i].point==0){ - if(pcm_data[i].buff[0]==0xA5){// start of loopback data - pcm_data[i].point+=4; - printk("\nstart receive data"); - } - } - else*/ - pcm_data[i].point+=4; - /* if(pcm_data[i].point==PCM_BUFF_SIZE){ //finish rx - pcm_data[i].finish=1; - printk("\nchannel[%d] finished", i); - } */ - } - } - if(firsttime[i]==1){ - for(j=0;j<num_rd;j++){ - if(pcm_data[i].buff[j]==0x1){ - num_cmp[i]=num_rd-j; - firsttime[i]=0; - break; - } - } - if(memcmp(sampledata+1, pcm_data[i].buff+j, num_cmp[i])!=0) - printk("\n\ndata wrong,1st\n\n"); - else - pcm_start_loc[i] = num_cmp[i]+1; - } - else{ - if(memcmp(sampledata+pcm_start_loc[i], pcm_data[i].buff, num_rd)!=0) - printk("\n\ndata wrong\n\n"); - else{ - pcm_start_loc[i]+=num_rd; - if(pcm_start_loc[i]>=256) - pcm_start_loc[i]=pcm_start_loc[i]-256; - } - } - - rdindex +=num_rd; - if(rdindex>=pcm_data[i].len) - rdindex=rdindex-pcm_data[i].len; -#ifdef PCM_ACCESS_DEBUG - meiDebugRead_16(pcm_start_addr+i*16+8, &temp, 1); -#else - meiDMARead_16(pcm_start_addr+i*16+8, &temp, 1); -#endif - temp= (temp & 0xffff0000) + rdindex; -#ifdef PCM_ACCESS_DEBUG - meiDebugWrite_16(pcm_start_addr+i*16+8, &temp, 1); // update rdindex -#else - meiDMAWrite_16(pcm_start_addr+i*16+8, &temp, 1); // update rdindex -#endif - - bytes_to_wr = num_rd; - - // if(bytes_to_wr>0){ - // printk(" %d", num_rd); - // printk(" %d", rdindex); -// printk("\n\nrdindex = %d", rdindex); - //} - } - else{ //tx channel - // if((bytes_to_wr + num_rd) < pcm_data[i].len){ - for(j=0;j<bytes_to_wr/4;j++){ - if(pcm_data[i].finish!=1){ - if((wrindex+j*4)>=pcm_data[i].len) - temp16=(wrindex+j*4) - pcm_data[i].len; - else - temp16=wrindex + j*4; -/* -#ifdef PCM_ACCESS_DEBUG - meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i+1].buff+j*4), 1); -#else - meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i+1].buff+j*4), 1); -#endif*/ - -#ifdef PCM_ACCESS_DEBUG - meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i].buff+pcm_data[i].point), 1); - // meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i].buff), 1); -#else - meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i].buff+pcm_data[i].point), 1); -#endif - pcm_data[i].point+=4; - if(pcm_data[i].point==PCM_BUFF_SIZE){ - // pcm_data[i].finish=1; - // printk("\nchannel[%d] finished", i); - pcm_data[i].point=0; - } - } - } - wrindex+=bytes_to_wr; - if(wrindex>=pcm_data[i].len) - wrindex=wrindex-pcm_data[i].len; -#ifdef PCM_ACCESS_DEBUG - meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1); -#else - meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1); -#endif - temp=(temp&0xffff) + (wrindex<<16); -#ifdef PCM_ACCESS_DEBUG - meiDebugWrite_16(pcm_start_addr+i*16+12, &temp, 1); // update wrindex -#else - meiDMAWrite_16(pcm_start_addr+i*16+12, &temp, 1); // update wrindex -#endif - - //if(bytes_to_wr>0){ - // printk(" %d", bytes_to_wr); - // printk(" %d", wrindex); -// printk("\n\nwrindex = %d", wrindex); - //} - // } - } - } - return; -} -//000002:fchang Start -static int meiResetArc(void) -{ - u32 auxreg0; - u32 auxreg5; - int flshcnt=0; - int flshcnt1=0; - int flshcnt2=0; - - meiLongwordWrite(MEI_CONTROL, 1); - meiLongwordWrite(MEI_DEBUG_DEC, 3); - meiLongwordWrite(MEI_DEBUG_WAD, 0x3c); - meiLongwordWrite(MEI_DEBUG_DATA, 0x10); - meiPollForDbgDone(); - meiLongwordWrite(MEI_DEBUG_DEC, 0x0); - meiLongwordWrite(MEI_DEBUG_WAD, 0x2); - meiLongwordWrite(MEI_DEBUG_DATA, 0x0); - meiPollForDbgDone(); - meiLongwordWrite(MEI_DEBUG_WAD, 0x3); - meiLongwordWrite(MEI_DEBUG_DATA, 0x0); - meiPollForDbgDone(); - meiLongwordWrite(MEI_DEBUG_DEC, 0x0); - meiLongwordWrite(MEI_DEBUG_RAD, 0x0); - meiPollForDbgDone(); - meiLongwordRead(MEI_DEBUG_DATA, &auxreg0); - auxreg0 = auxreg0 & 0x03ffffff; - meiLongwordWrite(MEI_DEBUG_WAD, 0x0); - meiLongwordWrite(MEI_DEBUG_DATA, auxreg0); - meiPollForDbgDone(); - meiLongwordWrite(MEI_DEBUG_WAD, 0x10a); - meiLongwordWrite(MEI_DEBUG_DATA, 0x0); - meiPollForDbgDone(); - meiLongwordWrite(MEI_DEBUG_DEC, 0x2); - meiLongwordWrite(MEI_DEBUG_WAD, 0xfffc); - meiLongwordWrite(MEI_DEBUG_DATA, 0x1fffffff); - meiPollForDbgDone(); - while(flshcnt<3){ - meiLongwordWrite(MEI_DEBUG_DEC, 0x0); - meiLongwordWrite(MEI_DEBUG_RAD, 0x0); - meiPollForDbgDone(); - meiLongwordRead(MEI_DEBUG_DATA, &auxreg0); - auxreg0 = auxreg0 & 0xff000000; - auxreg0 = auxreg0 | 0x3fff; - meiLongwordWrite(MEI_DEBUG_WAD, 0x0); - meiLongwordWrite(MEI_DEBUG_DATA, auxreg0); - meiPollForDbgDone(); - - meiLongwordWrite(MEI_DEBUG_DEC, 0x0); - meiLongwordWrite(MEI_DEBUG_RAD, 0x5); - meiPollForDbgDone(); - meiLongwordRead(MEI_DEBUG_DATA, &auxreg5); - auxreg5 = auxreg5 | 0x801; - meiLongwordWrite(MEI_DEBUG_WAD, 0x5); - meiLongwordWrite(MEI_DEBUG_DATA, auxreg5); - meiPollForDbgDone(); - meiLongwordWrite(MEI_DEBUG_RAD, 0x0); - meiPollForDbgDone(); - meiLongwordRead(MEI_DEBUG_DATA, &auxreg0); - auxreg0 = auxreg0 & 0x00ffffff; - if(auxreg0 == 0x4000) - flshcnt = flshcnt+1; - else{ - if(flshcnt == 0) - flshcnt1 = flshcnt1 +1; - else - flshcnt2 = flshcnt2 +1; - } - } - - return 1; -} - -static int meiResetCore(void) -{ - meiLongwordWrite(MEI_CONTROL, 0x1); - meiLongwordWrite(MEI_DEBUG_DEC, 0x2); - meiLongwordWrite(MEI_DEBUG_WAD, 0x31f10); - meiLongwordWrite(MEI_DEBUG_DATA, 0xf); - meiPollForDbgDone(); - meiLongwordWrite(MEI_DEBUG_WAD, 0x31f10); - meiLongwordWrite(MEI_DEBUG_DATA, 0x0); - meiPollForDbgDone(); - meiLongwordWrite(MEI_DEBUG_WAD, 0x31f00); - meiLongwordWrite(MEI_DEBUG_DATA, 0x55); - meiPollForDbgDone(); - return 1; -} - -static int meiEnalbeMailboxInt(void) -{ - u32 arc2meiintmsk; - meiLongwordRead(ARC_TO_MEI_INT_MASK, &arc2meiintmsk); - arc2meiintmsk = arc2meiintmsk | 0x1; - meiLongwordWrite(ARC_TO_MEI_INT_MASK, arc2meiintmsk); - meiLongwordWrite(MEI_CONTROL, 0x0); - return 1; -} - - - -//000002:fchang End - -static int mei_ioctl(struct inode * ino, struct file * fil, unsigned int command, unsigned long lon) -{ - int i,k; - u32 boot_loop; - u32 page_size; - u32 dest_addr; - u32 j; - u32 temp; - u32 temp2; - u16 trapsflag=0; - amazon_clreoc_pkt * current_clreoc; - struct timeval time_now; - struct timeval time_fini; - struct list_head * ptr; - amazon_mei_mib * mib_ptr; -// u16 buff[MSG_LENGTH]__attribute__ ((aligned(4))); - structpts pts; - int meierr=MEI_SUCCESS; - u16 data[12]; //used in makeCMV, to pass in payload when CMV set, ignored when CMV read. - meireg regrdwr; - meidebug debugrdwr; - amazon_mei_mib * temp_intvl; - struct sk_buff * eoc_skb; -// 603221:tc.chen start - u16 hdlc_cmd[2]; - u16 hdlc_rx_buffer[32]; - int hdlc_rx_len=0; -// 603221:tc.chen end - - int from_kernel = 0;//joelin - if (ino == (struct inode *)0) from_kernel = 1;//joelin - -// printk("\n switch.command = %i\n", command); - switch(command){ - case GET_ADSL_LINE_CODE: - pts.adslLineTableEntry_pt = (adslLineTableEntry *)kmalloc(sizeof(adslLineTableEntry), GFP_KERNEL); - copy_from_user((char *)pts.adslLineTableEntry_pt, (char *)lon, sizeof(adslLineTableEntry)); - if(IS_FLAG_SET((&(pts.adslLineTableEntry_pt->flags)), LINE_CODE_FLAG)){ - pts.adslLineTableEntry_pt->adslLineCode = 2; - } - copy_to_user((char *)lon, (char *)pts.adslLineTableEntry_pt, sizeof(adslLineTableEntry)); - kfree(pts.adslLineTableEntry_pt); - break; -#ifdef AMAZON_MEI_MIB_RFC3440 - case GET_ADSL_ATUC_LINE_EXT: - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - pts.adslLineExtTableEntry_pt = (adslLineExtTableEntry *)kmalloc(sizeof(adslLineExtTableEntry), GFP_KERNEL); - copy_from_user((char *)pts.adslLineExtTableEntry_pt, (char *)lon, sizeof(adslLineExtTableEntry)); - if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CAP_FLAG)){ - ATUC_LINE_TRANS_CAP_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 67 Index 0"); -#endif - CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CAP_FLAG); - } - else{ - memcpy((&(pts.adslLineExtTableEntry_pt->adslLineTransAtucCap)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG)){ - ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 67 Index 0"); -#endif - CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG); - } - else{ - memcpy((&(pts.adslLineExtTableEntry_pt->adslLineTransAtucConfig)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_ACTUAL_FLAG)){ - ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 2 Address 1 Index 0"); -#endif - CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_ACTUAL_FLAG); - } - else{ - memcpy((&(pts.adslLineExtTableEntry_pt->adslLineTransAtucActual)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG)){ // not supported currently -/* - LINE_GLITE_POWER_STATE_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 2 Address 0 Index 0"); -#endif - CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG); - } - else{ - memcpy((&(pts.adslLineExtTableEntry_pt->adslLineGlitePowerState)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } -*/ - CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG); - } - copy_to_user((char *)lon, (char *)pts.adslLineExtTableEntry_pt, sizeof(adslLineExtTableEntry)); - kfree(pts.adslLineTableEntry_pt); - up(&mei_sema); - break; -#endif - -#ifdef AMAZON_MEI_MIB_RFC3440 - case SET_ADSL_ATUC_LINE_EXT: - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - pts.adslLineExtTableEntry_pt = (adslLineExtTableEntry *)kmalloc(sizeof(adslLineExtTableEntry), GFP_KERNEL); - copy_from_user((char *)pts.adslLineExtTableEntry_pt, (char *)lon, sizeof(adslLineExtTableEntry)); - - //only adslLineTransAtucConfig can be set. - CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CAP_FLAG); - if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG)){ - memcpy(data,(&(pts.adslLineExtTableEntry_pt->adslLineTransAtucConfig)), 2); - ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 67 Index 0"); -#endif - CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG); - } - } - CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_ACTUAL_FLAG); - CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG); - - copy_to_user((char *)lon, (char *)pts.adslLineExtTableEntry_pt, sizeof(adslLineExtTableEntry)); - kfree(pts.adslLineTableEntry_pt); - up(&mei_sema); - break; -#endif - - case GET_ADSL_ATUC_PHY: - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - pts.adslAtucPhysEntry_pt = (adslAtucPhysEntry *)kmalloc(sizeof(adslAtucPhysEntry), GFP_KERNEL); - copy_from_user((char *)pts.adslAtucPhysEntry_pt, (char *)lon, sizeof(adslAtucPhysEntry)); - if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_SER_NUM_FLAG)){ - ATUC_PHY_SER_NUM_FLAG_MAKECMV1; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 57 Index 0"); -#endif - CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_SER_NUM_FLAG); - } - else{ - memcpy(pts.adslAtucPhysEntry_pt->serial_no, RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - ATUC_PHY_SER_NUM_FLAG_MAKECMV2; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 57 Index 12"); -#endif - CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_SER_NUM_FLAG); - } - else{ - memcpy((pts.adslAtucPhysEntry_pt->serial_no+24), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VENDOR_ID_FLAG)){ - ATUC_PHY_VENDOR_ID_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 64 Index 0"); -#endif - CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VENDOR_ID_FLAG); - } - else{ - memcpy(pts.adslAtucPhysEntry_pt->vendor_id.vendor_id, RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VER_NUM_FLAG)){ - ATUC_PHY_VER_NUM_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 58 Index 0"); -#endif - CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VER_NUM_FLAG); - } - else{ - memcpy(pts.adslAtucPhysEntry_pt->version_no, RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_STAT_FLAG)){ - pts.adslAtucPhysEntry_pt->status = CurrStatus.adslAtucCurrStatus; - } - if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_OUT_PWR_FLAG)){ - ATUC_CURR_OUT_PWR_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 68 Index 5"); -#endif - CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_OUT_PWR_FLAG); - } - else{ - memcpy((&(pts.adslAtucPhysEntry_pt->outputPwr)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_ATTR_FLAG)){ - ATUC_CURR_ATTR_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 69 Index 0"); -#endif - CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_ATTR_FLAG); - } - else{ - memcpy((&(pts.adslAtucPhysEntry_pt->attainableRate)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - copy_to_user((char *)lon, (char *)pts.adslAtucPhysEntry_pt, sizeof(adslAtucPhysEntry)); - kfree(pts.adslAtucPhysEntry_pt); - - up(&mei_sema); - break; - case GET_ADSL_ATUR_PHY: - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - pts.adslAturPhysEntry_pt = (adslAturPhysEntry *)kmalloc(sizeof(adslAturPhysEntry), GFP_KERNEL); - copy_from_user((char *)pts.adslAturPhysEntry_pt, (char *)lon, sizeof(adslAturPhysEntry)); - if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_SER_NUM_FLAG)){ - ATUR_PHY_SER_NUM_FLAG_MAKECMV1; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 62 Index 0"); -#endif - CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_SER_NUM_FLAG); - } - else{ - memcpy(pts.adslAturPhysEntry_pt->serial_no, RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - ATUR_PHY_SER_NUM_FLAG_MAKECMV2; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 62 Index 12"); -#endif - CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_SER_NUM_FLAG); - } - else{ - memcpy((pts.adslAturPhysEntry_pt->serial_no+24), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VENDOR_ID_FLAG)){ - ATUR_PHY_VENDOR_ID_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 65 Index 0"); -#endif - CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VENDOR_ID_FLAG); - } - else{ - memcpy(pts.adslAturPhysEntry_pt->vendor_id.vendor_id, RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VER_NUM_FLAG)){ - ATUR_PHY_VER_NUM_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 61 Index 0"); -#endif - CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VER_NUM_FLAG); - } - else{ - memcpy(pts.adslAturPhysEntry_pt->version_no, RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_SNRMGN_FLAG)){ - ATUR_SNRMGN_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 68 Index 4"); -#endif - CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_SNRMGN_FLAG); - } - else{ - memcpy((&(pts.adslAturPhysEntry_pt->SnrMgn)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_ATTN_FLAG)){ - ATUR_ATTN_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 68 Index 2"); -#endif - CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_ATTN_FLAG); - } - else{ - memcpy((&(pts.adslAturPhysEntry_pt->Attn)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_STAT_FLAG)){ - pts.adslAturPhysEntry_pt->status = CurrStatus.adslAturCurrStatus; - } - if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_OUT_PWR_FLAG)){ - ATUR_CURR_OUT_PWR_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 69 Index 5"); -#endif - CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_OUT_PWR_FLAG); - } - else{ - memcpy((&(pts.adslAturPhysEntry_pt->outputPwr)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_ATTR_FLAG)){ - ATUR_CURR_ATTR_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 68 Index 0"); -#endif - CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_ATTR_FLAG); - } - else{ - memcpy((&(pts.adslAturPhysEntry_pt->attainableRate)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - copy_to_user((char *)lon, (char *)pts.adslAturPhysEntry_pt, sizeof(adslAturPhysEntry)); - kfree(pts.adslAturPhysEntry_pt); - - up(&mei_sema); - break; - case GET_ADSL_ATUC_CHAN_INFO: - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - pts.adslAtucChanInfo_pt = (adslAtucChanInfo *)kmalloc(sizeof(adslAtucChanInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslAtucChanInfo_pt, (char *)lon, sizeof(adslAtucChanInfo)); - if(IS_FLAG_SET((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_INTLV_DELAY_FLAG)){ - if((chantype.interleave!=1) || (chantype.fast==1)){ - CLR_FLAG((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_INTLV_DELAY_FLAG); - } - else{ - ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 6 Address 3 Index 1"); -#endif - CLR_FLAG((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_INTLV_DELAY_FLAG); - } - else{ - memcpy((&(pts.adslAtucChanInfo_pt->interleaveDelay)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - } - if(IS_FLAG_SET((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_CURR_TX_RATE_FLAG)){ - ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 6 Address 1 Index 0"); -#endif - CLR_FLAG((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_CURR_TX_RATE_FLAG); - } - else{ - pts.adslAtucChanInfo_pt->currTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - } - if(IS_FLAG_SET((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_PREV_TX_RATE_FLAG)){ - pts.adslAtucChanInfo_pt->prevTxRate = PrevTxRate.adslAtucChanPrevTxRate; - } - copy_to_user((char *)lon, (char *)pts.adslAtucChanInfo_pt, sizeof(adslAtucChanInfo)); - kfree(pts.adslAtucChanInfo_pt); - - up(&mei_sema); - break; - case GET_ADSL_ATUR_CHAN_INFO: - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - pts.adslAturChanInfo_pt = (adslAturChanInfo *)kmalloc(sizeof(adslAturChanInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslAturChanInfo_pt, (char *)lon, sizeof(adslAturChanInfo)); - if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_INTLV_DELAY_FLAG)){ - if((chantype.interleave!=1) || (chantype.fast==1)){ - CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_INTLV_DELAY_FLAG); - } - else{ - ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 6 Address 2 Index 1"); -#endif - CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_INTLV_DELAY_FLAG); - } - else{ - memcpy((&(pts.adslAturChanInfo_pt->interleaveDelay)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - } - if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CURR_TX_RATE_FLAG)){ - ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 6 Address 0 Index 0"); -#endif - CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CURR_TX_RATE_FLAG); - } - else{ - pts.adslAturChanInfo_pt->currTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - } - if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_PREV_TX_RATE_FLAG)){ - pts.adslAturChanInfo_pt->prevTxRate = PrevTxRate.adslAturChanPrevTxRate; - } - if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CRC_BLK_LEN_FLAG)){ - // ? no CMV to update this - CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CRC_BLK_LEN_FLAG); - } - copy_to_user((char *)lon, (char *)pts.adslAturChanInfo_pt, sizeof(adslAturChanInfo)); - kfree(pts.adslAturChanInfo_pt); - - up(&mei_sema); - break; - case GET_ADSL_ATUC_PERF_DATA: - pts.atucPerfDataEntry_pt = (atucPerfDataEntry *)kmalloc(sizeof(atucPerfDataEntry), GFP_KERNEL); - copy_from_user((char *)pts.atucPerfDataEntry_pt, (char *)lon, sizeof(atucPerfDataEntry)); - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_LOFS_FLAG)){ - pts.atucPerfDataEntry_pt->adslAtucPerfLofs=ATUC_PERF_LOFS; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_LOSS_FLAG)){ - pts.atucPerfDataEntry_pt->adslAtucPerfLoss=ATUC_PERF_LOSS; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_ESS_FLAG)){ - pts.atucPerfDataEntry_pt->adslAtucPerfESs=ATUC_PERF_ESS; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_INITS_FLAG)){ - pts.atucPerfDataEntry_pt->adslAtucPerfInits=ATUC_PERF_INITS; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_VALID_INTVLS_FLAG)){ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i++; - if(i==96) - break; - } - pts.atucPerfDataEntry_pt->adslAtucPerfValidIntervals=i; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_INVALID_INTVLS_FLAG)){ - pts.atucPerfDataEntry_pt->adslAtucPerfInvalidIntervals=0; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG)){ - do_gettimeofday(&time_now); - pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinTimeElapsed=time_now.tv_sec - (current_intvl->start_time).tv_sec; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_LOFS_FLAG)){ - pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinLofs=current_intvl->AtucPerfLof; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_LOSS_FLAG)){ - pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinLoss=current_intvl->AtucPerfLos; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_ESS_FLAG)){ - pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinESs=current_intvl->AtucPerfEs; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_INIT_FLAG)){ - pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinInits=current_intvl->AtucPerfInit; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG)){ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i+=900; - } - do_gettimeofday(&time_now); - i+=time_now.tv_sec - (current_intvl->start_time).tv_sec; - if(i>=86400) - pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayTimeElapsed=i-86400; - else - pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayTimeElapsed=i; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_LOFS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfLof; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AtucPerfLof; - pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayLofs=j; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_LOSS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfLos; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AtucPerfLos; - pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayLoss=j; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_ESS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfEs; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AtucPerfEs; - pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayESs=j; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_INIT_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfInit; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AtucPerfInit; - pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayInits=j; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_MON_SEC_FLAG)){ - i=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - i++; - } - if(i>=96) - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayMoniSecs=86400; - else - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayMoniSecs=0; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_LOFS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfLof; - i++; - if(i==96) - break; - } - if(i==96) - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLofs=j; - else - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLofs=0; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_LOSS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfLos; - i++; - if(i==96) - break; - } - if(i==96) - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLoss=j; - else - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLoss=0; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_ESS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfEs; - i++; - if(i==96) - break; - } - if(i==96) - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayESs=j; - else - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayESs=0; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_INITS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfInit; - i++; - if(i==96) - break; - } - if(i==96) - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayInits=j; - else - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayInits=0; - } - - copy_to_user((char *)lon, (char *)pts.atucPerfDataEntry_pt, sizeof(atucPerfDataEntry)); - kfree(pts.atucPerfDataEntry_pt); - break; -#ifdef AMAZON_MEI_MIB_RFC3440 - case GET_ADSL_ATUC_PERF_DATA_EXT: //??? CMV mapping not available - pts.atucPerfDataExtEntry_pt = (atucPerfDataExtEntry *)kmalloc(sizeof(atucPerfDataExtEntry), GFP_KERNEL); - copy_from_user((char *)pts.atucPerfDataExtEntry_pt, (char *)lon, sizeof(atucPerfDataExtEntry)); - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_FASTR_FLAG)){ - pts.atucPerfDataExtEntry_pt->adslAtucPerfStatFastR=ATUC_PERF_STAT_FASTR; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_FAILED_FASTR_FLAG)){ - pts.atucPerfDataExtEntry_pt->adslAtucPerfStatFailedFastR=ATUC_PERF_STAT_FAILED_FASTR; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_SESL_FLAG)){ - pts.atucPerfDataExtEntry_pt->adslAtucPerfStatSesL=ATUC_PERF_STAT_SESL; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_UASL_FLAG)){ - pts.atucPerfDataExtEntry_pt->adslAtucPerfStatUasL=ATUC_PERF_STAT_UASL; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_FASTR_FLAG)){ - pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinFastR=current_intvl->AtucPerfStatFastR; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG)){ - pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinFailedFastR=current_intvl->AtucPerfStatFailedFastR; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_SESL_FLAG)){ - pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinSesL=current_intvl->AtucPerfStatSesL; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_UASL_FLAG)){ - pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinUasL=current_intvl->AtucPerfStatUasL; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_FASTR_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfStatFastR; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AtucPerfStatFastR; - pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DayFastR=j; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfStatFailedFastR; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AtucPerfStatFailedFastR; - pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DayFailedFastR=j; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_SESL_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfStatSesL; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AtucPerfStatSesL; - pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DaySesL=j; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_UASL_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfStatUasL; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AtucPerfStatUasL; - pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DayUasL=j; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_FASTR_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfStatFastR; - i++; - if(i==96) - break; - } - if(i==96) - pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFastR=j; - else - pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFastR=0; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfStatFailedFastR; - i++; - if(i==96) - break; - } - if(i==96) - pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFailedFastR=j; - else - pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFailedFastR=0; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_SESL_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfStatSesL; - i++; - if(i==96) - break; - } - if(i==96) - pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DaySesL=j; - else - pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DaySesL=0; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_UASL_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfStatUasL; - i++; - if(i==96) - break; - } - if(i==96) - pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayUasL=j; - else - pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayUasL=0; - } - copy_to_user((char *)lon, (char *)pts.atucPerfDataExtEntry_pt, sizeof(atucPerfDataExtEntry)); - kfree(pts.atucPerfDataExtEntry_pt); - break; -#endif - case GET_ADSL_ATUR_PERF_DATA: - pts.aturPerfDataEntry_pt = (aturPerfDataEntry *)kmalloc(sizeof(aturPerfDataEntry), GFP_KERNEL); - copy_from_user((char *)pts.aturPerfDataEntry_pt, (char *)lon, sizeof(aturPerfDataEntry)); - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_LOFS_FLAG)){ - pts.aturPerfDataEntry_pt->adslAturPerfLofs=ATUR_PERF_LOFS; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_LOSS_FLAG)){ - pts.aturPerfDataEntry_pt->adslAturPerfLoss=ATUR_PERF_LOSS; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_LPR_FLAG)){ - pts.aturPerfDataEntry_pt->adslAturPerfLprs=ATUR_PERF_LPR; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_ESS_FLAG)){ - pts.aturPerfDataEntry_pt->adslAturPerfESs=ATUR_PERF_ESS; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_VALID_INTVLS_FLAG)){ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i++; - if(i==96) - break; - } - pts.aturPerfDataEntry_pt->adslAturPerfValidIntervals=i; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_INVALID_INTVLS_FLAG)){ - pts.aturPerfDataEntry_pt->adslAturPerfInvalidIntervals=0; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG)){ - do_gettimeofday(&time_now); - pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinTimeElapsed=time_now.tv_sec - (current_intvl->start_time).tv_sec; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_LOFS_FLAG)){ - pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinLofs=current_intvl->AturPerfLof; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_LOSS_FLAG)){ - pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinLoss=current_intvl->AturPerfLos; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_LPR_FLAG)){ - pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinLprs=current_intvl->AturPerfLpr; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_ESS_FLAG)){ - pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinESs=current_intvl->AturPerfEs; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG)){ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i+=900; - } - do_gettimeofday(&time_now); - i+=time_now.tv_sec - (current_intvl->start_time).tv_sec; - if(i>=86400) - pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayTimeElapsed=i-86400; - else - pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayTimeElapsed=i; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_LOFS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfLof; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturPerfLof; - pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayLofs=j; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_LOSS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfLos; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturPerfLos; - pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayLoss=j; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_LPR_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfLpr; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturPerfLpr; - pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayLprs=j; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_ESS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfEs; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturPerfEs; - pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayESs=j; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_MON_SEC_FLAG)){ - i=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - i++; - } - if(i>=96) - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayMoniSecs=86400; - else - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayMoniSecs=0; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_LOFS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfLof; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLofs=j; - else - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLofs=0; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_LOSS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfLos; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLoss=j; - else - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLoss=0; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_LPR_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfLpr; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLprs=j; - else - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLprs=0; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_ESS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfEs; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayESs=j; - else - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayESs=0; - } - - copy_to_user((char *)lon, (char *)pts.aturPerfDataEntry_pt, sizeof(aturPerfDataEntry)); - kfree(pts.aturPerfDataEntry_pt); - break; -#ifdef AMAZON_MEI_MIB_RFC3440 - case GET_ADSL_ATUR_PERF_DATA_EXT: - pts.aturPerfDataExtEntry_pt = (aturPerfDataExtEntry *)kmalloc(sizeof(aturPerfDataExtEntry), GFP_KERNEL); - copy_from_user((char *)pts.aturPerfDataExtEntry_pt, (char *)lon, sizeof(aturPerfDataExtEntry)); - if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_STAT_SESL_FLAG)){ - pts.aturPerfDataExtEntry_pt->adslAturPerfStatSesL=ATUR_PERF_STAT_SESL; - } - if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_STAT_UASL_FLAG)){ - pts.aturPerfDataExtEntry_pt->adslAturPerfStatUasL=ATUR_PERF_STAT_UASL; - } - if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_15MIN_SESL_FLAG)){ - pts.aturPerfDataExtEntry_pt->adslAturPerfCurr15MinSesL=current_intvl->AturPerfStatSesL; - } - if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_15MIN_UASL_FLAG)){ - pts.aturPerfDataExtEntry_pt->adslAturPerfCurr15MinUasL=current_intvl->AturPerfStatUasL; - } - if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_1DAY_SESL_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfStatSesL; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturPerfStatSesL; - pts.aturPerfDataExtEntry_pt->adslAturPerfCurr1DaySesL=j; - } - if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_1DAY_UASL_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfStatUasL; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturPerfStatUasL; - pts.aturPerfDataExtEntry_pt->adslAturPerfCurr1DayUasL=j; - } - if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_PREV_1DAY_SESL_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfStatSesL; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DaySesL=j; - else - pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DaySesL=0; - } - if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_PREV_1DAY_UASL_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfStatUasL; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DayUasL=j; - else - pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DayUasL=0; - } - copy_to_user((char *)lon, (char *)pts.aturPerfDataExtEntry_pt, sizeof(aturPerfDataExtEntry)); - kfree(pts.aturPerfDataExtEntry_pt); - break; -#endif - case GET_ADSL_ATUC_INTVL_INFO: - pts.adslAtucIntvlInfo_pt = (adslAtucIntvlInfo *)kmalloc(sizeof(adslAtucIntvlInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslAtucIntvlInfo_pt, (char *)lon, sizeof(adslAtucIntvlInfo)); - - if(pts.adslAtucIntvlInfo_pt->IntervalNumber <1){ - pts.adslAtucIntvlInfo_pt->intervalLOF = ATUC_PERF_LOFS; - pts.adslAtucIntvlInfo_pt->intervalLOS = ATUC_PERF_LOSS; - pts.adslAtucIntvlInfo_pt->intervalES = ATUC_PERF_ESS; - pts.adslAtucIntvlInfo_pt->intervalInits = ATUC_PERF_INITS; - pts.adslAtucIntvlInfo_pt->intervalValidData = 1; - } - else{ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i++; - if(i==pts.adslAtucIntvlInfo_pt->IntervalNumber){ - temp_intvl = list_entry(ptr, amazon_mei_mib, list); - pts.adslAtucIntvlInfo_pt->intervalLOF = temp_intvl->AtucPerfLof; - pts.adslAtucIntvlInfo_pt->intervalLOS = temp_intvl->AtucPerfLos; - pts.adslAtucIntvlInfo_pt->intervalES = temp_intvl->AtucPerfEs; - pts.adslAtucIntvlInfo_pt->intervalInits = temp_intvl->AtucPerfInit; - pts.adslAtucIntvlInfo_pt->intervalValidData = 1; - break; - } - } - if(ptr==&interval_list){ - pts.adslAtucIntvlInfo_pt->intervalValidData = 0; - pts.adslAtucIntvlInfo_pt->flags = 0; - pts.adslAtucIntvlInfo_pt->intervalLOF = 0; - pts.adslAtucIntvlInfo_pt->intervalLOS = 0; - pts.adslAtucIntvlInfo_pt->intervalES = 0; - pts.adslAtucIntvlInfo_pt->intervalInits = 0; - } - } - - copy_to_user((char *)lon, (char *)pts.adslAtucIntvlInfo_pt, sizeof(adslAtucIntvlInfo)); - kfree(pts.adslAtucIntvlInfo_pt); - break; -#ifdef AMAZON_MEI_MIB_RFC3440 - case GET_ADSL_ATUC_INTVL_EXT_INFO: - pts.adslAtucInvtlExtInfo_pt = (adslAtucInvtlExtInfo *)kmalloc(sizeof(adslAtucInvtlExtInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslAtucInvtlExtInfo_pt, (char *)lon, sizeof(adslAtucInvtlExtInfo)); - if(pts.adslAtucInvtlExtInfo_pt->IntervalNumber <1){ - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFastR = ATUC_PERF_STAT_FASTR; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFailedFastR = ATUC_PERF_STAT_FAILED_FASTR; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalSesL = ATUC_PERF_STAT_SESL; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalUasL = ATUC_PERF_STAT_UASL; -// pts.adslAtucInvtlExtInfo_pt->intervalValidData = 1; - } - else{ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i++; - if(i==pts.adslAtucInvtlExtInfo_pt->IntervalNumber){ - temp_intvl = list_entry(ptr, amazon_mei_mib, list); - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFastR = temp_intvl->AtucPerfStatFastR; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFailedFastR = temp_intvl->AtucPerfStatFailedFastR; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalSesL = temp_intvl->AtucPerfStatSesL; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalUasL = temp_intvl->AtucPerfStatUasL; -// pts.adslAtucInvtlExtInfo_pt->intervalValidData = 1; - break; - } - } - if(ptr==&interval_list){ -// pts.adslAtucInvtlExtInfo_pt->intervalValidData = 0; - pts.adslAtucInvtlExtInfo_pt->flags = 0; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFastR = 0; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFailedFastR = 0; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalSesL = 0; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalUasL = 0; - } - } - copy_to_user((char *)lon, (char *)pts.adslAtucInvtlExtInfo_pt, sizeof(adslAtucInvtlExtInfo)); - kfree(pts.adslAtucInvtlExtInfo_pt); - break; -#endif - case GET_ADSL_ATUR_INTVL_INFO: - pts.adslAturIntvlInfo_pt = (adslAturIntvlInfo *)kmalloc(sizeof(adslAturIntvlInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslAturIntvlInfo_pt, (char *)lon, sizeof(adslAturIntvlInfo)); - - if(pts.adslAturIntvlInfo_pt->IntervalNumber <1){ - pts.adslAturIntvlInfo_pt->intervalLOF = ATUR_PERF_LOFS; - pts.adslAturIntvlInfo_pt->intervalLOS = ATUR_PERF_LOSS; - pts.adslAturIntvlInfo_pt->intervalES = ATUR_PERF_ESS; - pts.adslAturIntvlInfo_pt->intervalLPR = ATUR_PERF_LPR; - pts.adslAturIntvlInfo_pt->intervalValidData = 1; - } - else{ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i++; - if(i==pts.adslAturIntvlInfo_pt->IntervalNumber){ - temp_intvl = list_entry(ptr, amazon_mei_mib, list); - pts.adslAturIntvlInfo_pt->intervalLOF = temp_intvl->AturPerfLof; - pts.adslAturIntvlInfo_pt->intervalLOS = temp_intvl->AturPerfLos; - pts.adslAturIntvlInfo_pt->intervalES = temp_intvl->AturPerfEs; - pts.adslAturIntvlInfo_pt->intervalLPR = temp_intvl->AturPerfLpr; - pts.adslAturIntvlInfo_pt->intervalValidData = 1; - break; - } - } - if(ptr==&interval_list){ - pts.adslAturIntvlInfo_pt->intervalValidData = 0; - pts.adslAturIntvlInfo_pt->flags = 0; - pts.adslAturIntvlInfo_pt->intervalLOF = 0; - pts.adslAturIntvlInfo_pt->intervalLOS = 0; - pts.adslAturIntvlInfo_pt->intervalES = 0; - pts.adslAturIntvlInfo_pt->intervalLPR = 0; - } - } - - copy_to_user((char *)lon, (char *)pts.adslAturIntvlInfo_pt, sizeof(adslAturIntvlInfo)); - kfree(pts.adslAturIntvlInfo_pt); - break; -#ifdef AMAZON_MEI_MIB_RFC3440 - case GET_ADSL_ATUR_INTVL_EXT_INFO: - pts.adslAturInvtlExtInfo_pt = (adslAturInvtlExtInfo *)kmalloc(sizeof(adslAturInvtlExtInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslAturInvtlExtInfo_pt, (char *)lon, sizeof(adslAturInvtlExtInfo)); - - if(pts.adslAturInvtlExtInfo_pt->IntervalNumber <1){ - pts.adslAturInvtlExtInfo_pt->adslAturIntervalSesL = ATUR_PERF_STAT_SESL; - pts.adslAturInvtlExtInfo_pt->adslAturIntervalUasL = ATUR_PERF_STAT_UASL; -// pts.adslAturInvtlExtInfo_pt->intervalValidData = 1; - } - else{ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i++; - if(i==pts.adslAturInvtlExtInfo_pt->IntervalNumber){ - temp_intvl = list_entry(ptr, amazon_mei_mib, list); - pts.adslAturInvtlExtInfo_pt->adslAturIntervalSesL = temp_intvl->AturPerfStatSesL; - pts.adslAturInvtlExtInfo_pt->adslAturIntervalUasL = temp_intvl->AturPerfStatUasL; -// pts.adslAturInvtlExtInfo_pt->intervalValidData = 1; - break; - } - } - if(ptr==&interval_list){ -// pts.adslAturInvtlExtInfo_pt->intervalValidData = 0; - pts.adslAturInvtlExtInfo_pt->flags = 0; - pts.adslAturInvtlExtInfo_pt->adslAturIntervalSesL = 0; - pts.adslAturInvtlExtInfo_pt->adslAturIntervalUasL = 0; - } - } - - copy_to_user((char *)lon, (char *)pts.adslAturInvtlExtInfo_pt, sizeof(adslAturInvtlExtInfo)); - kfree(pts.adslAturInvtlExtInfo_pt); - break; -#endif - case GET_ADSL_ATUC_CHAN_PERF_DATA: - pts.atucChannelPerfDataEntry_pt = (atucChannelPerfDataEntry *)kmalloc(sizeof(atucChannelPerfDataEntry), GFP_KERNEL); - copy_from_user((char *)pts.atucChannelPerfDataEntry_pt, (char *)lon, sizeof(atucChannelPerfDataEntry)); - - pts.atucChannelPerfDataEntry_pt->flags = 0; - - copy_to_user((char *)lon, (char *)pts.atucChannelPerfDataEntry_pt, sizeof(atucChannelPerfDataEntry)); - kfree(pts.atucChannelPerfDataEntry_pt); - break; - case GET_ADSL_ATUR_CHAN_PERF_DATA: - pts.aturChannelPerfDataEntry_pt = (aturChannelPerfDataEntry *)kmalloc(sizeof(aturChannelPerfDataEntry), GFP_KERNEL); - copy_from_user((char *)pts.aturChannelPerfDataEntry_pt, (char *)lon, sizeof(aturChannelPerfDataEntry)); - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_RECV_BLK_FLAG)){ - pts.aturChannelPerfDataEntry_pt->adslAturChanReceivedBlks=ATUR_CHAN_RECV_BLK; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_TX_BLK_FLAG)){ - pts.aturChannelPerfDataEntry_pt->adslAturChanTransmittedBlks=ATUR_CHAN_TX_BLK; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_CORR_BLK_FLAG)){ - pts.aturChannelPerfDataEntry_pt->adslAturChanCorrectedBlks=ATUR_CHAN_CORR_BLK; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_UNCORR_BLK_FLAG)){ - pts.aturChannelPerfDataEntry_pt->adslAturChanUncorrectBlks=ATUR_CHAN_UNCORR_BLK; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_VALID_INTVL_FLAG)){ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i++; - if(i==96) - break; - } - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfValidIntervals=i; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_INVALID_INTVL_FLAG)){ - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfInvalidIntervals=0; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG)){ - do_gettimeofday(&time_now); - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinTimeElapsed=time_now.tv_sec - (current_intvl->start_time).tv_sec; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG)){ - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinReceivedBlks=current_intvl->AturChanPerfRxBlk; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG)){ - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinTransmittedBlks=current_intvl->AturChanPerfTxBlk; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG)){ - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinCorrectedBlks=current_intvl->AturChanPerfCorrBlk; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG)){ - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinUncorrectBlks=current_intvl->AturChanPerfUncorrBlk; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG)){ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i+=900; - } - do_gettimeofday(&time_now); - i+=time_now.tv_sec - (current_intvl->start_time).tv_sec; - if(i>=86400) - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayTimeElapsed=i-86400; - else - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayTimeElapsed=i; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturChanPerfRxBlk; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturChanPerfRxBlk; - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayReceivedBlks=j; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturChanPerfTxBlk; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturChanPerfTxBlk; - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayTransmittedBlks=j; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturChanPerfCorrBlk; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturChanPerfCorrBlk; - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayCorrectedBlks=j; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturChanPerfUncorrBlk; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturChanPerfUncorrBlk; - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayUncorrectBlks=j; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG)){ - i=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - i++; - } - if(i>=96) - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayMoniSecs=86400; - else - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayMoniSecs=0; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturChanPerfRxBlk; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayReceivedBlks=j; - else - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayReceivedBlks=0; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturChanPerfTxBlk; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayTransmittedBlks=j; - else - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayTransmittedBlks=0; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturChanPerfCorrBlk; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayCorrectedBlks=j; - else - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayCorrectedBlks=0; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturChanPerfUncorrBlk; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayUncorrectBlks=j; - else - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayUncorrectBlks=0; - } - - copy_to_user((char *)lon, (char *)pts.aturChannelPerfDataEntry_pt, sizeof(aturChannelPerfDataEntry)); - kfree(pts.aturChannelPerfDataEntry_pt); - break; - case GET_ADSL_ATUC_CHAN_INTVL_INFO: - pts.adslAtucChanIntvlInfo_pt = (adslAtucChanIntvlInfo *)kmalloc(sizeof(adslAtucChanIntvlInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslAtucChanIntvlInfo_pt, (char *)lon, sizeof(adslAtucChanIntvlInfo)); - - pts.adslAtucChanIntvlInfo_pt->flags = 0; - - copy_to_user((char *)lon, (char *)pts.adslAtucChanIntvlInfo_pt, sizeof(adslAtucChanIntvlInfo)); - kfree(pts.adslAtucChanIntvlInfo_pt); - break; - case GET_ADSL_ATUR_CHAN_INTVL_INFO: - pts.adslAturChanIntvlInfo_pt = (adslAturChanIntvlInfo *)kmalloc(sizeof(adslAturChanIntvlInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslAturChanIntvlInfo_pt, (char *)lon, sizeof(adslAturChanIntvlInfo)); - - if(pts.adslAturChanIntvlInfo_pt->IntervalNumber <1){ - pts.adslAturChanIntvlInfo_pt->chanIntervalRecvdBlks = ATUR_CHAN_RECV_BLK; - pts.adslAturChanIntvlInfo_pt->chanIntervalXmitBlks = ATUR_CHAN_TX_BLK; - pts.adslAturChanIntvlInfo_pt->chanIntervalCorrectedBlks = ATUR_CHAN_CORR_BLK; - pts.adslAturChanIntvlInfo_pt->chanIntervalUncorrectBlks = ATUR_CHAN_UNCORR_BLK; - pts.adslAturChanIntvlInfo_pt->intervalValidData = 1; - } - else{ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i++; - if(i==pts.adslAturChanIntvlInfo_pt->IntervalNumber){ - temp_intvl = list_entry(ptr, amazon_mei_mib, list); - pts.adslAturChanIntvlInfo_pt->chanIntervalRecvdBlks = temp_intvl->AturChanPerfRxBlk; - pts.adslAturChanIntvlInfo_pt->chanIntervalXmitBlks = temp_intvl->AturChanPerfTxBlk; - pts.adslAturChanIntvlInfo_pt->chanIntervalCorrectedBlks = temp_intvl->AturChanPerfCorrBlk; - pts.adslAturChanIntvlInfo_pt->chanIntervalUncorrectBlks = temp_intvl->AturChanPerfUncorrBlk; - pts.adslAturChanIntvlInfo_pt->intervalValidData = 1; - break; - } - } - if(ptr==&interval_list){ - pts.adslAturChanIntvlInfo_pt->intervalValidData = 0; - pts.adslAturChanIntvlInfo_pt->flags = 0; - } - } - - copy_to_user((char *)lon, (char *)pts.adslAturChanIntvlInfo_pt, sizeof(adslAturChanIntvlInfo)); - kfree(pts.adslAturChanIntvlInfo_pt); - break; - case GET_ADSL_ALRM_CONF_PROF: - pts.adslLineAlarmConfProfileEntry_pt = (adslLineAlarmConfProfileEntry *)kmalloc(sizeof(adslLineAlarmConfProfileEntry), GFP_KERNEL); - copy_from_user((char *)pts.adslLineAlarmConfProfileEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileEntry)); - - strncpy(pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileName, AlarmConfProfile.adslLineAlarmConfProfileName, 32); - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOFS_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLofs=AlarmConfProfile.adslAtucThresh15MinLofs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOSS_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLoss=AlarmConfProfile.adslAtucThresh15MinLoss; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_ESS_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinESs=AlarmConfProfile.adslAtucThresh15MinESs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEUP_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateUp=AlarmConfProfile.adslAtucThreshFastRateUp; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEUP_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateUp=AlarmConfProfile.adslAtucThreshInterleaveRateUp; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEDOWN_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateDown=AlarmConfProfile.adslAtucThreshFastRateDown; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateDown=AlarmConfProfile.adslAtucThreshInterleaveRateDown; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAtucInitFailureTrapEnable=AlarmConfProfile.adslAtucInitFailureTrapEnable; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOFS_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLofs=AlarmConfProfile.adslAturThresh15MinLofs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOSS_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLoss=AlarmConfProfile.adslAturThresh15MinLoss; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LPRS_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLprs=AlarmConfProfile.adslAturThresh15MinLprs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_ESS_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinESs=AlarmConfProfile.adslAturThresh15MinESs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEUP_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateUp=AlarmConfProfile.adslAturThreshFastRateUp; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEUP_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateUp=AlarmConfProfile.adslAturThreshInterleaveRateUp; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEDOWN_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateDown=AlarmConfProfile.adslAturThreshFastRateDown; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateDown=AlarmConfProfile.adslAturThreshInterleaveRateDown; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileRowStatus=AlarmConfProfile.adslLineAlarmConfProfileRowStatus; - } - copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileEntry_pt, sizeof(adslLineAlarmConfProfileEntry)); - kfree(pts.adslLineAlarmConfProfileEntry_pt); - break; -#ifdef AMAZON_MEI_MIB_RFC3440 - case GET_ADSL_ALRM_CONF_PROF_EXT: - pts.adslLineAlarmConfProfileExtEntry_pt = (adslLineAlarmConfProfileExtEntry *)kmalloc(sizeof(adslLineAlarmConfProfileExtEntry), GFP_KERNEL); - copy_from_user((char *)pts.adslLineAlarmConfProfileExtEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileExtEntry)); - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_FAILED_FASTR_FLAG)){ - pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinFailedFastR=AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_SESL_FLAG)){ - pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinSesL=AlarmConfProfileExt.adslAtucThreshold15MinSesL; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_UASL_FLAG)){ - pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinUasL=AlarmConfProfileExt.adslAtucThreshold15MinUasL; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_SESL_FLAG)){ - pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinSesL=AlarmConfProfileExt.adslAturThreshold15MinSesL; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_UASL_FLAG)){ - pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinUasL=AlarmConfProfileExt.adslAturThreshold15MinUasL; - } - copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileExtEntry_pt, sizeof(adslLineAlarmConfProfileExtEntry)); - kfree(pts.adslLineAlarmConfProfileExtEntry_pt); - break; -#endif - case SET_ADSL_ALRM_CONF_PROF: - pts.adslLineAlarmConfProfileEntry_pt = (adslLineAlarmConfProfileEntry *)kmalloc(sizeof(adslLineAlarmConfProfileEntry), GFP_KERNEL); - copy_from_user((char *)pts.adslLineAlarmConfProfileEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileEntry)); - - strncpy(AlarmConfProfile.adslLineAlarmConfProfileName, pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileName, 32); - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOFS_FLAG)){ - AlarmConfProfile.adslAtucThresh15MinLofs=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLofs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOSS_FLAG)){ - AlarmConfProfile.adslAtucThresh15MinLoss=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLoss; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_ESS_FLAG)){ - AlarmConfProfile.adslAtucThresh15MinESs=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinESs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEUP_FLAG)){ - AlarmConfProfile.adslAtucThreshFastRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateUp; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEUP_FLAG)){ - AlarmConfProfile.adslAtucThreshInterleaveRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateUp; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEDOWN_FLAG)){ - AlarmConfProfile.adslAtucThreshFastRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateDown; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG)){ - AlarmConfProfile.adslAtucThreshInterleaveRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateDown; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG)){ - AlarmConfProfile.adslAtucInitFailureTrapEnable=pts.adslLineAlarmConfProfileEntry_pt->adslAtucInitFailureTrapEnable; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOFS_FLAG)){ - AlarmConfProfile.adslAturThresh15MinLofs=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLofs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOSS_FLAG)){ - AlarmConfProfile.adslAturThresh15MinLoss=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLoss; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LPRS_FLAG)){ - AlarmConfProfile.adslAturThresh15MinLprs=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLprs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_ESS_FLAG)){ - AlarmConfProfile.adslAturThresh15MinESs=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinESs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEUP_FLAG)){ - AlarmConfProfile.adslAturThreshFastRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateUp; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEUP_FLAG)){ - AlarmConfProfile.adslAturThreshInterleaveRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateUp; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEDOWN_FLAG)){ - AlarmConfProfile.adslAturThreshFastRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateDown; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG)){ - AlarmConfProfile.adslAturThreshInterleaveRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateDown; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG)){ - AlarmConfProfile.adslLineAlarmConfProfileRowStatus=pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileRowStatus; - } - copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileEntry_pt, sizeof(adslLineAlarmConfProfileEntry)); - kfree(pts.adslLineAlarmConfProfileEntry_pt); - break; - -#ifdef AMAZON_MEI_MIB_RFC3440 - case SET_ADSL_ALRM_CONF_PROF_EXT: - pts.adslLineAlarmConfProfileExtEntry_pt = (adslLineAlarmConfProfileExtEntry *)kmalloc(sizeof(adslLineAlarmConfProfileExtEntry), GFP_KERNEL); - copy_from_user((char *)pts.adslLineAlarmConfProfileExtEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileExtEntry)); - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_FAILED_FASTR_FLAG)){ - AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR=pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinFailedFastR; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_SESL_FLAG)){ - AlarmConfProfileExt.adslAtucThreshold15MinSesL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinSesL; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_UASL_FLAG)){ - AlarmConfProfileExt.adslAtucThreshold15MinUasL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinUasL; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_SESL_FLAG)){ - AlarmConfProfileExt.adslAturThreshold15MinSesL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinSesL; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_UASL_FLAG)){ - AlarmConfProfileExt.adslAturThreshold15MinUasL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinUasL; - } - copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileExtEntry_pt, sizeof(adslLineAlarmConfProfileExtEntry)); - kfree(pts.adslLineAlarmConfProfileExtEntry_pt); - break; -#endif - - case ADSL_ATUR_TRAPS: - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - trapsflag=0; - if(AlarmConfProfile.adslAtucThresh15MinLofs!=0 && current_intvl->AtucPerfLof>=AlarmConfProfile.adslAtucThresh15MinLofs) - trapsflag|=ATUC_PERF_LOFS_THRESH_FLAG; - if(AlarmConfProfile.adslAtucThresh15MinLoss!=0 && current_intvl->AtucPerfLos>=AlarmConfProfile.adslAtucThresh15MinLoss) - trapsflag|=ATUC_PERF_LOSS_THRESH_FLAG; - if(AlarmConfProfile.adslAtucThresh15MinESs!=0 && current_intvl->AtucPerfEs>=AlarmConfProfile.adslAtucThresh15MinESs) - trapsflag|=ATUC_PERF_ESS_THRESH_FLAG; - if(chantype.fast==1){ - if(AlarmConfProfile.adslAtucThreshFastRateUp!=0 || AlarmConfProfile.adslAtucThreshFastRateDown!=0){ - ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 6 Address 1 Index 0"); -#endif - } - else{ - temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - if((AlarmConfProfile.adslAtucThreshFastRateUp!=0) && (temp>=PrevTxRate.adslAtucChanPrevTxRate+AlarmConfProfile.adslAtucThreshFastRateUp)){ - trapsflag|=ATUC_RATE_CHANGE_FLAG; - PrevTxRate.adslAtucChanPrevTxRate = temp; - } - if((AlarmConfProfile.adslAtucThreshFastRateDown!=0) && (temp<=PrevTxRate.adslAtucChanPrevTxRate-AlarmConfProfile.adslAtucThreshFastRateDown)){ - trapsflag|=ATUC_RATE_CHANGE_FLAG; - PrevTxRate.adslAtucChanPrevTxRate = temp; - } - } - } - } - if(chantype.interleave==1){ - if(AlarmConfProfile.adslAtucThreshInterleaveRateUp!=0 || AlarmConfProfile.adslAtucThreshInterleaveRateDown!=0){ - ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 6 Address 1 Index 0"); -#endif - } - else{ - temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - if((AlarmConfProfile.adslAtucThreshInterleaveRateUp!=0) && (temp>=PrevTxRate.adslAtucChanPrevTxRate+AlarmConfProfile.adslAtucThreshInterleaveRateUp)){ - trapsflag|=ATUC_RATE_CHANGE_FLAG; - PrevTxRate.adslAtucChanPrevTxRate = temp; - } - if((AlarmConfProfile.adslAtucThreshInterleaveRateDown!=0) && (temp<=PrevTxRate.adslAtucChanPrevTxRate-AlarmConfProfile.adslAtucThreshInterleaveRateDown)){ - trapsflag|=ATUC_RATE_CHANGE_FLAG; - PrevTxRate.adslAtucChanPrevTxRate = temp; - } - } - } - } - if(AlarmConfProfile.adslAturThresh15MinLofs!=0 && current_intvl->AturPerfLof>=AlarmConfProfile.adslAturThresh15MinLofs) - trapsflag|=ATUR_PERF_LOFS_THRESH_FLAG; - if(AlarmConfProfile.adslAturThresh15MinLoss!=0 && current_intvl->AturPerfLos>=AlarmConfProfile.adslAturThresh15MinLoss) - trapsflag|=ATUR_PERF_LOSS_THRESH_FLAG; - if(AlarmConfProfile.adslAturThresh15MinLprs!=0 && current_intvl->AturPerfLpr>=AlarmConfProfile.adslAturThresh15MinLprs) - trapsflag|=ATUR_PERF_LPRS_THRESH_FLAG; - if(AlarmConfProfile.adslAturThresh15MinESs!=0 && current_intvl->AturPerfEs>=AlarmConfProfile.adslAturThresh15MinESs) - trapsflag|=ATUR_PERF_ESS_THRESH_FLAG; - if(chantype.fast==1){ - if(AlarmConfProfile.adslAturThreshFastRateUp!=0 || AlarmConfProfile.adslAturThreshFastRateDown!=0){ - ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 6 Address 0 Index 0"); -#endif - } - else{ - temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - if((AlarmConfProfile.adslAturThreshFastRateUp!=0) && (temp>=PrevTxRate.adslAturChanPrevTxRate+AlarmConfProfile.adslAturThreshFastRateUp)){ - trapsflag|=ATUR_RATE_CHANGE_FLAG; - PrevTxRate.adslAturChanPrevTxRate = temp; - } - if((AlarmConfProfile.adslAturThreshFastRateDown!=0) && (temp<=PrevTxRate.adslAturChanPrevTxRate-AlarmConfProfile.adslAturThreshFastRateDown)){ - trapsflag|=ATUR_RATE_CHANGE_FLAG; - PrevTxRate.adslAturChanPrevTxRate = temp; - } - } - } - } - if(chantype.interleave==1){ - if(AlarmConfProfile.adslAturThreshInterleaveRateUp!=0 || AlarmConfProfile.adslAturThreshInterleaveRateDown!=0){ - ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 6 Address 0 Index 0"); -#endif - } - else{ - temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - if((AlarmConfProfile.adslAturThreshInterleaveRateUp!=0) && (temp>=PrevTxRate.adslAturChanPrevTxRate+AlarmConfProfile.adslAturThreshInterleaveRateUp)){ - trapsflag|=ATUR_RATE_CHANGE_FLAG; - PrevTxRate.adslAturChanPrevTxRate = temp; - } - if((AlarmConfProfile.adslAturThreshInterleaveRateDown!=0) && (temp<=PrevTxRate.adslAturChanPrevTxRate-AlarmConfProfile.adslAturThreshInterleaveRateDown)){ - trapsflag|=ATUR_RATE_CHANGE_FLAG; - PrevTxRate.adslAturChanPrevTxRate = temp; - } - } - } - } - copy_to_user((char *)lon, (char *)(&trapsflag), 2); - - up(&mei_sema); - break; - -#ifdef AMAZON_MEI_MIB_RFC3440 - case ADSL_ATUR_EXT_TRAPS: - trapsflag=0; - if(AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR!=0 && current_intvl->AtucPerfStatFailedFastR>=AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR) - trapsflag|=ATUC_15MIN_FAILED_FASTR_TRAP_FLAG; - if(AlarmConfProfileExt.adslAtucThreshold15MinSesL!=0 && current_intvl->AtucPerfStatSesL>=AlarmConfProfileExt.adslAtucThreshold15MinSesL) - trapsflag|=ATUC_15MIN_SESL_TRAP_FLAG; - if(AlarmConfProfileExt.adslAtucThreshold15MinUasL!=0 && current_intvl->AtucPerfStatUasL>=AlarmConfProfileExt.adslAtucThreshold15MinUasL) - trapsflag|=ATUC_15MIN_UASL_TRAP_FLAG; - if(AlarmConfProfileExt.adslAturThreshold15MinSesL!=0 && current_intvl->AturPerfStatSesL>=AlarmConfProfileExt.adslAturThreshold15MinSesL) - trapsflag|=ATUR_15MIN_SESL_TRAP_FLAG; - if(AlarmConfProfileExt.adslAturThreshold15MinUasL!=0 && current_intvl->AturPerfStatUasL>=AlarmConfProfileExt.adslAturThreshold15MinUasL) - trapsflag|=ATUR_15MIN_UASL_TRAP_FLAG; - copy_to_user((char *)lon, (char *)(&trapsflag), 2); - break; -#endif - -// 603221:tc.chen start - case GET_ADSL_LINE_STATUS: - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - pts.adslLineStatusInfo_pt = (adslLineStatusInfo *)kmalloc(sizeof(adslLineStatusInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslLineStatusInfo_pt, (char *)lon, sizeof(adslLineStatusInfo)); - - if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_MODEM_STATUS_FLAG)){ - LINE_STAT_MODEM_STATUS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group STAT Address 0 Index 0"); -#endif - pts.adslLineStatusInfo_pt->adslModemStatus = 0; - } - else{ - pts.adslLineStatusInfo_pt->adslModemStatus = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_MODE_SEL_FLAG)){ - LINE_STAT_MODE_SEL_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group STAT Address 1 Index 0"); -#endif - pts.adslLineStatusInfo_pt->adslModeSelected = 0; - } - else{ - pts.adslLineStatusInfo_pt->adslModeSelected = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_TRELLCOD_ENABLE_FLAG)){ - LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group OPTN Address 2 Index 0"); -#endif - pts.adslLineStatusInfo_pt->adslTrellisCodeEnable = 0; - } - else{ - - pts.adslLineStatusInfo_pt->adslTrellisCodeEnable = (RxMessage[4]>>13)&0x1==0x1?0:1; - } - } - - if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_LATENCY_FLAG)){ - LINE_STAT_LATENCY_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group STAT Address 12 Index 0"); -#endif - pts.adslLineStatusInfo_pt->adslLatency = 0; - } - else{ - pts.adslLineStatusInfo_pt->adslLatency = RxMessage[4]; - } - } - - copy_to_user((char *)lon, (char *)pts.adslLineStatusInfo_pt, sizeof(adslLineStatusInfo)); - kfree(pts.adslLineStatusInfo_pt); - - up(&mei_sema); - break; - - - case GET_ADSL_LINE_RATE: - if (showtime!=1) - return -ERESTARTSYS; - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - pts.adslLineRateInfo_pt = (adslLineRateInfo *)kmalloc(sizeof(adslLineRateInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslLineRateInfo_pt, (char *)lon, sizeof(adslLineRateInfo)); - - if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_DATA_RATEDS_FLAG)){ - if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode - { - if (chantype.interleave) - LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV; - else - LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV; - - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group RATE Address 1 Index 0"); -#endif - pts.adslLineRateInfo_pt->adslDataRateds = 0; - } - else{ - pts.adslLineRateInfo_pt->adslDataRateds = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - }else // adsl 2/2+ - { - unsigned long Mp,Lp,Tp,Rp,Kp,Bpn,DataRate,DataRate_remain; - Mp=Lp=Tp=Rp=Kp=Bpn=DataRate=DataRate_remain=0; - //// up stream data rate - - if (chantype.interleave) - { - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 25 Index 0"); -#endif - Lp = 0; - }else - Lp=RxMessage[4]; - - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 23 Index 0"); -#endif - Rp = 0; - }else - Rp=RxMessage[4]; - - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 24 Index 0"); -#endif - Mp = 0; - }else - Mp=RxMessage[4]; - - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 26 Index 0"); -#endif - Tp = 0; - }else - Tp=RxMessage[4]; - - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 28 Index 0"); -#endif - Kp = 0; - }else - { - Kp=RxMessage[4]+ RxMessage[5]+1; - Bpn=RxMessage[4]+ RxMessage[5]; - } - }else - { - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 25 Index 1"); -#endif - Lp = 0; - }else - Lp=RxMessage[4]; - - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 23 Index 1"); -#endif - Rp = 0; - }else - Rp=RxMessage[4]; - - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 24 Index 1"); -#endif - Mp = 0; - }else - Mp=RxMessage[4]; - - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 26 Index 1"); -#endif - Tp = 0; - }else - Tp=RxMessage[4]; - - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 28 Index 2"); -#endif - Kp = 0; - }else - { - Kp=RxMessage[4]+ RxMessage[5]+1; - Bpn=RxMessage[4]+ RxMessage[5]; - } - } - DataRate=((Tp*(Bpn+1)-1)*Mp*Lp*4)/(Tp*(Kp*Mp+Rp)); - //DataRate_remain=((((Tp*(Bpn+1)-1)*Mp*Lp*4)%(Tp*(Kp*Mp+Rp)))*1000)/(Tp*(Kp*Mp+Rp)); - //pts.adslLineRateInfo_pt->adslDataRateds = DataRate * 1000 + DataRate_remain; - pts.adslLineRateInfo_pt->adslDataRateds = DataRate; - } - } - - if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_DATA_RATEUS_FLAG)){ - if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode - { - if (chantype.interleave) - LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV; - else - LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV; - - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ - #ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group RATE Address 0 Index 0"); - #endif - pts.adslLineRateInfo_pt->adslDataRateus = 0; - } - else{ - pts.adslLineRateInfo_pt->adslDataRateus = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - }else // adsl 2/2+ - { - unsigned long Mp,Lp,Tp,Rp,Kp,Bpn,DataRate,DataRate_remain; - Mp=Lp=Tp=Rp=Kp=Bpn=DataRate=DataRate_remain=0; - //// down stream data rate - - if (chantype.interleave) - { - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 14 Index 0"); -#endif - Lp = 0; - }else - Lp=RxMessage[4]; - - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 12 Index 0"); -#endif - Rp = 0; - }else - Rp=RxMessage[4]; - - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 13 Index 0"); -#endif - Mp = 0; - }else - Mp=RxMessage[4]; - - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 15 Index 0"); -#endif - Tp = 0; - }else - Tp=RxMessage[4]; - - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 17 Index 0"); -#endif - Kp = 0; - }else - { - Kp=RxMessage[4]+ RxMessage[5]+1; - Bpn=RxMessage[4]+ RxMessage[5]; - } - }else - { - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 14 Index 1"); -#endif - Lp = 0; - }else - Lp=RxMessage[4]; - - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 12 Index 1"); -#endif - Rp = 0; - }else - Rp=RxMessage[4]; - - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 13 Index 1"); -#endif - Mp = 0; - }else - Mp=RxMessage[4]; - - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 15 Index 1"); -#endif - Tp = 0; - }else - Tp=RxMessage[4]; - - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 17 Index 2"); -#endif - Kp = 0; - }else - { - Kp=RxMessage[4]+ RxMessage[5]+1; - Bpn=RxMessage[4]+ RxMessage[5]; - } - } - DataRate=((Tp*(Bpn+1)-1)*Mp*Lp*4)/(Tp*(Kp*Mp+Rp)); - //DataRate_remain=((((Tp*(Bpn+1)-1)*Mp*Lp*4)%(Tp*(Kp*Mp+Rp)))*1000)/(Tp*(Kp*Mp+Rp)); - //pts.adslLineRateInfo_pt->adslDataRateus = DataRate * 1000 + DataRate_remain; - pts.adslLineRateInfo_pt->adslDataRateus = DataRate; - } - } - - if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_ATTNDRDS_FLAG)){ - LINE_RATE_ATTNDRDS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 68 Index 4"); -#endif - pts.adslLineRateInfo_pt->adslATTNDRds = 0; - } - else{ - pts.adslLineRateInfo_pt->adslATTNDRds = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - } - - if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_ATTNDRUS_FLAG)){ - if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode - { - LINE_RATE_ATTNDRUS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ - #ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 69 Index 4"); - #endif - pts.adslLineRateInfo_pt->adslATTNDRus = 0; - } - else{ - pts.adslLineRateInfo_pt->adslATTNDRus = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - }else - { - hdlc_cmd[0]=0x0181; - hdlc_cmd[1]=0x24; - up(&mei_sema); - if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY) - { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - hdlc_rx_len=0; - hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); - if (hdlc_rx_len <=0) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_RATE_END; - } - pts.adslLineRateInfo_pt->adslATTNDRus = (u32)le16_to_cpu(hdlc_rx_buffer[1])<<16 | (u32)le16_to_cpu(hdlc_rx_buffer[2]); - } - if(down_interruptible(&mei_sema)) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_RATE_END; - } - } - } - copy_to_user((char *)lon, (char *)pts.adslLineRateInfo_pt, sizeof(adslLineRateInfo)); - up(&mei_sema); - -GET_ADSL_LINE_RATE_END: - kfree(pts.adslLineRateInfo_pt); - break; - - case GET_ADSL_LINE_INFO: - if (showtime!=1) - return -ERESTARTSYS; - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - pts.adslLineInfo_pt = (adslLineInfo *)kmalloc(sizeof(adslLineInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslLineInfo_pt, (char *)lon, sizeof(adslLineInfo)); - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_INTLV_DEPTHDS_FLAG)){ - if (chantype.interleave) - LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV; - else - LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV; - - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 27 Index 0"); -#endif - pts.adslLineInfo_pt->adslInterleaveDepthds = 0; - } - else{ - pts.adslLineInfo_pt->adslInterleaveDepthds = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_INTLV_DEPTHUS_FLAG)){ - if (chantype.interleave) - LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV; - else - LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV; - - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 16 Index 0"); -#endif - pts.adslLineInfo_pt->adslInterleaveDepthus = 0; - } - else{ - pts.adslLineInfo_pt->adslInterleaveDepthus = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_LATNDS_FLAG)){ - LINE_INFO_LATNDS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 68 Index 1"); -#endif - pts.adslLineInfo_pt->adslLATNds = 0; - } - else{ - pts.adslLineInfo_pt->adslLATNds = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_LATNUS_FLAG)){ - if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode - { - LINE_INFO_LATNUS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 69 Index 1"); -#endif - pts.adslLineInfo_pt->adslLATNus = 0; - } - else{ - pts.adslLineInfo_pt->adslLATNus = RxMessage[4]; - } - }else - { - hdlc_cmd[0]=0x0181; - hdlc_cmd[1]=0x21; - up(&mei_sema); - if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY) - { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - hdlc_rx_len=0; - hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); - if (hdlc_rx_len <=0) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - pts.adslLineInfo_pt->adslLATNus = le16_to_cpu(hdlc_rx_buffer[1]); - } - if(down_interruptible(&mei_sema)) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - } - } - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SATNDS_FLAG)){ - LINE_INFO_SATNDS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 68 Index 2"); -#endif - pts.adslLineInfo_pt->adslSATNds = 0; - } - else{ - pts.adslLineInfo_pt->adslSATNds = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SATNUS_FLAG)){ - if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode - { - LINE_INFO_SATNUS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 69 Index 2"); -#endif - pts.adslLineInfo_pt->adslSATNus = 0; - } - else{ - pts.adslLineInfo_pt->adslSATNus = RxMessage[4]; - } - }else - { - hdlc_cmd[0]=0x0181; - hdlc_cmd[1]=0x22; - up(&mei_sema); - if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY) - { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - hdlc_rx_len=0; - hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); - if (hdlc_rx_len <=0) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - pts.adslLineInfo_pt->adslSATNus = le16_to_cpu(hdlc_rx_buffer[1]); - } - if(down_interruptible(&mei_sema)) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - } - } - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SNRMNDS_FLAG)){ - if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode - { - LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV; - } - else if ((adsl_mode == 0x4000) || (adsl_mode == 0x8000) || adsl_mode_extend > 0) - { - LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV; - } - else - { - LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV; - } - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 68 Index 3"); -#endif - pts.adslLineInfo_pt->adslSNRMds = 0; - } - else{ - if (adsl_mode>8 || adsl_mode_extend>0) - { - int SNRMds,SNRMds_remain; - SNRMds=RxMessage[4]; - SNRMds_remain=((SNRMds&0xff)*1000)/256; - SNRMds=(SNRMds>>8)&0xff; - if ((SNRMds_remain%100)>=50) SNRMds_remain=(SNRMds_remain/100)+1; - else SNRMds_remain=(SNRMds_remain/100); - pts.adslLineInfo_pt->adslSNRMds = SNRMds*10 + SNRMds_remain; - }else - { - pts.adslLineInfo_pt->adslSNRMds = RxMessage[4]; - } - } - } - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SNRMNUS_FLAG)){ - if (adsl_mode <=8 && adsl_mode_extend == 0) - { - LINE_INFO_SNRMNUS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 69 Index 3"); -#endif - pts.adslLineInfo_pt->adslSNRMus = 0; - } - else{ - pts.adslLineInfo_pt->adslSNRMus = RxMessage[4]; - } - }else - { - hdlc_cmd[0]=0x0181; - hdlc_cmd[1]=0x23; - up(&mei_sema); - if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY) - { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - hdlc_rx_len=0; - hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); - if (hdlc_rx_len <=0) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - pts.adslLineInfo_pt->adslSNRMus = le16_to_cpu(hdlc_rx_buffer[1]); - } - if(down_interruptible(&mei_sema)) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - } - } - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_ACATPDS_FLAG)){ - if (adsl_mode <=8 && adsl_mode_extend == 0) - { - LINE_INFO_ACATPDS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ - #ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 68 Index 6"); - #endif - pts.adslLineInfo_pt->adslACATPds = 0; - } - else{ - pts.adslLineInfo_pt->adslACATPds = RxMessage[4]; - } - }else - { - hdlc_cmd[0]=0x0181; - hdlc_cmd[1]=0x25; - up(&mei_sema); - if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY) - { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - hdlc_rx_len=0; - hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); - if (hdlc_rx_len <=0) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - pts.adslLineInfo_pt->adslACATPds = le16_to_cpu(hdlc_rx_buffer[1]); - } - if(down_interruptible(&mei_sema)) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - } - } - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_ACATPUS_FLAG)){ - if (adsl_mode <=8 && adsl_mode_extend == 0) - { - LINE_INFO_ACATPUS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 69 Index 6"); -#endif - pts.adslLineInfo_pt->adslACATPus = 0; - } - else{ - pts.adslLineInfo_pt->adslACATPus = RxMessage[4]; - } - }else - { - hdlc_cmd[0]=0x0181; - hdlc_cmd[1]=0x26; - up(&mei_sema); - if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY) - { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - hdlc_rx_len=0; - hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); - if (hdlc_rx_len <=0) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - pts.adslLineInfo_pt->adslACATPus = le16_to_cpu(hdlc_rx_buffer[1]); - } - if(down_interruptible(&mei_sema)) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - } - } - - copy_to_user((char *)lon, (char *)pts.adslLineInfo_pt, sizeof(adslLineInfo)); - up(&mei_sema); - -GET_ADSL_LINE_INFO_END: - kfree(pts.adslLineInfo_pt); - break; - - case GET_ADSL_NEAREND_STATS: - if (showtime!=1) - return -ERESTARTSYS; - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - pts.adslNearEndPerfStats_pt = (adslNearEndPerfStats *)kmalloc(sizeof(adslNearEndPerfStats), GFP_KERNEL); - copy_from_user((char *)pts.adslNearEndPerfStats_pt, (char *)lon, sizeof(adslNearEndPerfStats)); - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_SUPERFRAME_FLAG)){ - NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 20 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslSuperFrames = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslSuperFrames = (u32)(RxMessage[4]); - } - NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 21 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslSuperFrames = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslSuperFrames += (((u32)(RxMessage[4]))<<16); - } - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOS_FLAG) || - IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOF_FLAG) || - IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LPR_FLAG) || - IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_NCD_FLAG) || - IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LCD_FLAG) ){ - NEAREND_PERF_LOS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 0 Index 0"); -#endif - RxMessage[4] = 0; - } - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOS_FLAG)){ - if( (RxMessage[4]&0x1) == 0x1) - pts.adslNearEndPerfStats_pt->adslneLOS = 1; - else - pts.adslNearEndPerfStats_pt->adslneLOS = 0; - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOF_FLAG)){ - if( (RxMessage[4]&0x2) == 0x2) - pts.adslNearEndPerfStats_pt->adslneLOF = 1; - else - pts.adslNearEndPerfStats_pt->adslneLOF = 0; - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LPR_FLAG)){ - if( (RxMessage[4]&0x4) == 0x4) - pts.adslNearEndPerfStats_pt->adslneLPR = 1; - else - pts.adslNearEndPerfStats_pt->adslneLPR = 0; - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_NCD_FLAG)){ - pts.adslNearEndPerfStats_pt->adslneNCD = (RxMessage[4]>>4)&0x3; - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LCD_FLAG)){ - pts.adslNearEndPerfStats_pt->adslneLCD = (RxMessage[4]>>6)&0x3; - } - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_CRC_FLAG)){ - if (chantype.interleave) - NEAREND_PERF_CRC_FLAG_LP0_MAKECMV; - else - NEAREND_PERF_CRC_FLAG_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 2 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslneCRC = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslneCRC = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_RSCORR_FLAG)){ - if (chantype.interleave) - NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV; - else - NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV; - - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 3 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslneRSCorr = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslneRSCorr = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_FECS_FLAG)){ - NEAREND_PERF_FECS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 6 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslneFECS = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslneFECS = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_ES_FLAG)){ - NEAREND_PERF_ES_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 7 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslneES = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslneES = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_SES_FLAG)){ - NEAREND_PERF_SES_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 8 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslneSES = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslneSES = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOSS_FLAG)){ - NEAREND_PERF_LOSS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 9 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslneLOSS = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslneLOSS = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_UAS_FLAG)){ - NEAREND_PERF_UAS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 10 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslneUAS = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslneUAS = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_HECERR_FLAG)){ - if (chantype.bearchannel0) - { - NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV; - }else if (chantype.bearchannel1) - { - NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV; - } - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 11 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslneHECErrors = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslneHECErrors = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - } - - copy_to_user((char *)lon, (char *)pts.adslNearEndPerfStats_pt, sizeof(adslNearEndPerfStats)); - kfree(pts.adslNearEndPerfStats_pt); - - up(&mei_sema); - break; - - case GET_ADSL_FAREND_STATS: - - if (showtime!=1) - return -ERESTARTSYS; - - if (adsl_mode>8 || adsl_mode_extend > 0) - { - do_gettimeofday(&time_now); - if( FarendData_acquire_time.tv_sec==0 || time_now.tv_sec - FarendData_acquire_time.tv_sec>=1) - { - hdlc_cmd[0]=0x105; - - if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],2)!= -EBUSY) - { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - hdlc_rx_len=0; - hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); - if (hdlc_rx_len <=0) - { - return -ERESTARTSYS; - } - FarendStatsData.adslfeRSCorr = ((u32)le16_to_cpu(hdlc_rx_buffer[1]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[2]); - FarendStatsData.adslfeCRC = ((u32)le16_to_cpu(hdlc_rx_buffer[3]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[4]); - FarendStatsData.adslfeFECS = ((u32)le16_to_cpu(hdlc_rx_buffer[5]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[6]); - FarendStatsData.adslfeES = ((u32)le16_to_cpu(hdlc_rx_buffer[7]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[8]); - FarendStatsData.adslfeSES = ((u32)le16_to_cpu(hdlc_rx_buffer[9]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[10]); - FarendStatsData.adslfeLOSS = ((u32)le16_to_cpu(hdlc_rx_buffer[11]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[12]); - FarendStatsData.adslfeUAS = ((u32)le16_to_cpu(hdlc_rx_buffer[13]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[14]); - do_gettimeofday(&FarendData_acquire_time); - } - - } - } - - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - pts.adslFarEndPerfStats_pt = (adslFarEndPerfStats *)kmalloc(sizeof(adslFarEndPerfStats), GFP_KERNEL); - copy_from_user((char *)pts.adslFarEndPerfStats_pt, (char *)lon, sizeof(adslFarEndPerfStats)); - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOS_FLAG) || - IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOF_FLAG) || - IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LPR_FLAG) || - IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_NCD_FLAG) || - IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LCD_FLAG) ){ - FAREND_PERF_LOS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 1 Index 0"); -#endif - RxMessage[4] = 0; - } - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOS_FLAG)){ - if((RxMessage[4]&0x1) == 0x1) - pts.adslFarEndPerfStats_pt->adslfeLOS = 1; - else - pts.adslFarEndPerfStats_pt->adslfeLOS = 0; - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOF_FLAG)){ - if((RxMessage[4]&0x2) == 0x2) - pts.adslFarEndPerfStats_pt->adslfeLOF = 1; - else - pts.adslFarEndPerfStats_pt->adslfeLOF = 0; - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LPR_FLAG)){ - if((RxMessage[4]&0x4) == 0x4) - pts.adslFarEndPerfStats_pt->adslfeLPR = 1; - else - pts.adslFarEndPerfStats_pt->adslfeLPR = 0; - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_NCD_FLAG)){ - pts.adslFarEndPerfStats_pt->adslfeNCD = (RxMessage[4]>>4)&0x3; - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LCD_FLAG)){ - pts.adslFarEndPerfStats_pt->adslfeLCD = (RxMessage[4]>>6)&0x3; - } - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_CRC_FLAG)){ - if (adsl_mode<=8 && adsl_mode_extend == 0) - { - if (chantype.interleave) - { - FAREND_PERF_CRC_FLAG_LP0_MAKECMV; - } - else - { - FAREND_PERF_CRC_FLAG_LP1_MAKECMV; - } - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 24 Index 0"); -#endif - pts.adslFarEndPerfStats_pt->adslfeCRC = 0; - } - else{ - pts.adslFarEndPerfStats_pt->adslfeCRC = RxMessage[4]; - } - }else - { - pts.adslFarEndPerfStats_pt->adslfeCRC = FarendStatsData.adslfeCRC; - } - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_RSCORR_FLAG)){ - if (adsl_mode<=8 && adsl_mode_extend == 0) - { - if (chantype.interleave) - FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV; - else - FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 28 Index 0"); -#endif - pts.adslFarEndPerfStats_pt->adslfeRSCorr = 0; - } - else{ - pts.adslFarEndPerfStats_pt->adslfeRSCorr = RxMessage[4]; - - } - } - else - { - pts.adslFarEndPerfStats_pt->adslfeRSCorr = FarendStatsData.adslfeRSCorr; - } - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_FECS_FLAG)){ - if (adsl_mode<=8 && adsl_mode_extend == 0) - { - FAREND_PERF_FECS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 32 Index 0"); -#endif - pts.adslFarEndPerfStats_pt->adslfeFECS = 0; - } - else{ - pts.adslFarEndPerfStats_pt->adslfeFECS = RxMessage[4]; - } - }else { - pts.adslFarEndPerfStats_pt->adslfeFECS = FarendStatsData.adslfeFECS; - } - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_ES_FLAG)){ - if (adsl_mode<=8 && adsl_mode_extend == 0) - { - FAREND_PERF_ES_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 33 Index 0"); -#endif - pts.adslFarEndPerfStats_pt->adslfeES = 0; - } - else{ - pts.adslFarEndPerfStats_pt->adslfeES = RxMessage[4]; - } - }else - { - pts.adslFarEndPerfStats_pt->adslfeES = FarendStatsData.adslfeES; - } - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_SES_FLAG)){ - if (adsl_mode<=8 && adsl_mode_extend == 0) - { - FAREND_PERF_SES_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 34 Index 0"); -#endif - pts.adslFarEndPerfStats_pt->adslfeSES = 0; - } - else{ - pts.adslFarEndPerfStats_pt->adslfeSES = RxMessage[4]; - - } - }else - { - pts.adslFarEndPerfStats_pt->adslfeSES = FarendStatsData.adslfeSES; - } - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOSS_FLAG)){ - if (adsl_mode<=8 && adsl_mode_extend == 0) - { - FAREND_PERF_LOSS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - pts.adslFarEndPerfStats_pt->adslfeLOSS = 0; - } - else{ - pts.adslFarEndPerfStats_pt->adslfeLOSS = RxMessage[4]; - - } - }else - { - pts.adslFarEndPerfStats_pt->adslfeLOSS = FarendStatsData.adslfeLOSS; - } - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_UAS_FLAG)){ - if (adsl_mode<=8 && adsl_mode_extend == 0) - { - FAREND_PERF_UAS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 36 Index 0"); -#endif - pts.adslFarEndPerfStats_pt->adslfeUAS = 0; - } - else{ - pts.adslFarEndPerfStats_pt->adslfeUAS = RxMessage[4]; - - } - }else - { - pts.adslFarEndPerfStats_pt->adslfeUAS = FarendStatsData.adslfeUAS; - } - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_HECERR_FLAG)){ - if (chantype.bearchannel0) - { - FAREND_PERF_HECERR_FLAG_BC0_MAKECMV; - }else if (chantype.bearchannel1) - { - FAREND_PERF_HECERR_FLAG_BC1_MAKECMV; - } - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 37 Index 0"); -#endif - pts.adslFarEndPerfStats_pt->adslfeHECErrors = 0; - } - else{ - pts.adslFarEndPerfStats_pt->adslfeHECErrors = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - } - - copy_to_user((char *)lon, (char *)pts.adslFarEndPerfStats_pt, sizeof(adslFarEndPerfStats)); - kfree(pts.adslFarEndPerfStats_pt); - - up(&mei_sema); - - break; -// 603221:tc.chen end - case GET_ADSL_LOOP_DIAGNOSTICS_MODE: - //lon = loop_diagnostics_mode; - copy_to_user((char *)lon, (char *)&loop_diagnostics_mode, sizeof(int)); - break; -//>> SHC - case IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE: - copy_to_user((char *)lon, (char *)&loop_diagnostics_completed, sizeof(int)); - break; - -//<< end SHC - case LOOP_DIAGNOSTIC_MODE_COMPLETE: - loop_diagnostics_completed = 1; - // read adsl mode - makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group STAT Address 1 Index 0"); -#endif - } - adsl_mode = RxMessage[4]; - - makeCMV(H2D_CMV_READ, STAT, 17, 0, 1, data); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group STAT Address 1 Index 0"); -#endif - } - adsl_mode_extend = RxMessage[4]; - wake_up_interruptible(&wait_queue_loop_diagnostic); - break; - case SET_ADSL_LOOP_DIAGNOSTICS_MODE: - if (lon != loop_diagnostics_mode) - { - loop_diagnostics_completed = 0; - loop_diagnostics_mode = lon; - - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_REBOOT, NULL); - - } - break; - case GET_ADSL_ATUR_SUBCARRIER_STATS: - if (loop_diagnostics_completed == 0) - { - interruptible_sleep_on_timeout(&wait_queue_loop_diagnostic,300*HZ); - if (loop_diagnostics_completed==0) - { - return -ERESTARTSYS; - } - } - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - pts.adslATURSubcarrierInfo_pt = (adslATURSubcarrierInfo *)kmalloc(sizeof(adslATURSubcarrierInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslATURSubcarrierInfo_pt, (char *)lon, sizeof(adslATURSubcarrierInfo)); - - if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_HLINSC)){ - FAREND_HLINSC_MAKECMV(H2D_CMV_READ); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - pts.adslATURSubcarrierInfo_pt->HLINSCds = 0; - } - else{ - pts.adslATURSubcarrierInfo_pt->HLINSCds = RxMessage[4]; - - } - } - if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_HLINPS)){ - int index=0,size=12; - //printk("FAREND_HLINPS\n"); - for (index=0;index<1024;index+=size) - { - if (index+size>=1024) - size = 1024-index; - FAREND_HLINPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - } - else{ - memcpy(&pts.adslATURSubcarrierInfo_pt->HLINpsds[index],&RxMessage[4],size*2); -#if 0 - int msg_idx; - for(msg_idx=0;msg_idx<size;msg_idx++) - printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); -#endif - } - } - } - - if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_HLOGMT)){ - FAREND_HLOGMT_MAKECMV(H2D_CMV_READ); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - pts.adslATURSubcarrierInfo_pt->HLOGMTds = 0; - } - else{ - pts.adslATURSubcarrierInfo_pt->HLOGMTds = RxMessage[4]; - - } - } - - ///////////////////////////////////////////////////////////////////////// - if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_HLOGPS)){ - //printk("FAREND_HLOGPS\n"); - int index=0,size=12; - for (index=0;index<256;index+=size) - { - if (index+size>=256) - size = 256-index; - - FAREND_HLOGPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - } - else{ - if (adsl_mode < 0x4000 && adsl_mode_extend==0)//adsl2 mode - { - memcpy(&pts.adslATURSubcarrierInfo_pt->HLOGpsds[index],&RxMessage[4],size*2); - }else - { - int msg_idx=0; - for (msg_idx=0;msg_idx<size;msg_idx++) - { - pts.adslATURSubcarrierInfo_pt->HLOGpsds[(index+msg_idx)*2+1] = RxMessage[4+msg_idx]; - //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); - } - } - } - } - if (adsl_mode >= 0x4000 || adsl_mode_extend >0)//adsl2+ mode - { - pts.adslATURSubcarrierInfo_pt->HLOGpsds[0] = pts.adslATURSubcarrierInfo_pt->HLOGpsds[1]; - for (index=1;index<256;index++) - { - pts.adslATURSubcarrierInfo_pt->HLOGpsds[index*2] = (pts.adslATURSubcarrierInfo_pt->HLOGpsds[(index)*2-1] + pts.adslATURSubcarrierInfo_pt->HLOGpsds[(index)*2+1] +1) >>1; - } - } - } - if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_QLNMT)){ - FAREND_QLNMT_MAKECMV(H2D_CMV_READ); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - pts.adslATURSubcarrierInfo_pt->QLNMTds = 0; - } - else{ - pts.adslATURSubcarrierInfo_pt->QLNMTds = RxMessage[4]; - } - } - - ///////////////////////////////////////////////////////////////////////// - if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_QLNPS)){ - int index=0,size=12; - //printk("FAREND_QLNPS\n"); - for (index=0;index<128;index+=size) - { - if (index+size>=128) - size = 128-index; - FAREND_QLNPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - } - else{ - int msg_idx=0; - for (msg_idx=0;msg_idx<size;msg_idx++) - { - //memcpy(&pts.adslATURSubcarrierInfo_pt->QLNpsds[index],&RxMessage[4],size*2); - if (adsl_mode < 0x4000 && adsl_mode_extend==0)//adsl2 mode - { - pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF); - pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF); - }else - { - pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*4+1] = (u16)(RxMessage[4+msg_idx]&0xFF); - pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*4+3] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF); - //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); - } - } - - - } - } - if (adsl_mode >= 0x4000 || adsl_mode_extend >0)//adsl2+ mode - { - pts.adslATURSubcarrierInfo_pt->QLNpsds[0] = pts.adslATURSubcarrierInfo_pt->QLNpsds[1]; - for (index=1;index<256;index++) - { - pts.adslATURSubcarrierInfo_pt->QLNpsds[index*2] = (pts.adslATURSubcarrierInfo_pt->QLNpsds[(index)*2-1] + pts.adslATURSubcarrierInfo_pt->QLNpsds[(index)*2+1]) >>1; - } - } - } - if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_SNRMT)){ - FAREND_SNRMT_MAKECMV(H2D_CMV_READ); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - pts.adslATURSubcarrierInfo_pt->SNRMTds = 0; - } - else{ - pts.adslATURSubcarrierInfo_pt->SNRMTds = RxMessage[4]; - } - } - if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_SNRPS)){ - int index=0,size=12; - //printk("FAREND_SNRPS\n"); - for (index=0;index<512;index+=size) - { - if (index+size>=512) - size = 512-index; - FAREND_SNRPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - } - else{ - //memcpy(&pts.adslATURSubcarrierInfo_pt->SNRpsds[index],&RxMessage[4],size*2); - int msg_idx=0; - for (msg_idx=0;msg_idx<size;msg_idx++) - { - pts.adslATURSubcarrierInfo_pt->SNRpsds[index+msg_idx] = (u16)(RxMessage[4+msg_idx]&0xFF); - //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); - } - - } - } - } - if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_BITPS)){ - int index=0,size=12; - //printk("FAREND_BITPS\n"); - for (index=0;index<256;index+=size) - { - if (index+size>=256) - size = 256-index; - FAREND_BITPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - } - else{ - int msg_idx=0; - for (msg_idx=0;msg_idx<size;msg_idx++) - { - pts.adslATURSubcarrierInfo_pt->BITpsds[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF); - pts.adslATURSubcarrierInfo_pt->BITpsds[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF); - //printk("index:%d ,cmv_result: %04X, %d\n",index+msg_idx,RxMessage[4+msg_idx],RxMessage[4+msg_idx]); - - } - - } - } - } - if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_GAINPS)){ - int index=0,size=12; - //printk("FAREND_GAINPS\n"); - for (index=0;index<512;index+=size) - { - FAREND_GAINPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - } - else{ - /* - int msg_idx=0; - for (msg_idx=0;msg_idx<size;msg_idx++) - { - pts.adslATURSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2] = RxMessage[4+msg_idx]&0xFF; - pts.adslATURSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2+1] = (RxMessage[4+msg_idx]>>8)&0xFF; - - } - */ - memcpy(&pts.adslATURSubcarrierInfo_pt->GAINpsds[index],&RxMessage[4],size*2); -#if 0 - int msg_idx=0; - for (msg_idx=0;msg_idx<size;msg_idx++) - { - printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); - - } -#endif - } - } - } - copy_to_user((char *)lon, (char *)pts.adslATURSubcarrierInfo_pt, sizeof(adslATURSubcarrierInfo)); - kfree(pts.adslATURSubcarrierInfo_pt); - - up(&mei_sema); - break; - case GET_ADSL_ATUC_SUBCARRIER_STATS: - if (loop_diagnostics_completed == 0) - { - interruptible_sleep_on_timeout(&wait_queue_loop_diagnostic,300*HZ); - if (loop_diagnostics_completed==0) - { - return -ERESTARTSYS; - } - } - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - pts.adslATUCSubcarrierInfo_pt = (adslATUCSubcarrierInfo *)kmalloc(sizeof(adslATUCSubcarrierInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslATUCSubcarrierInfo_pt, (char *)lon, sizeof(adslATUCSubcarrierInfo)); - - - if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_HLINSC)){ - NEAREND_HLINSC_MAKECMV(H2D_CMV_READ); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 71 Index 2"); -#endif - pts.adslATUCSubcarrierInfo_pt->HLINSCus = 0; - } - else{ - pts.adslATUCSubcarrierInfo_pt->HLINSCus = RxMessage[4]; - - } - } - if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_HLINPS)){ - int index=0,size=12; - //printk("NEAREND_HLINPS\n"); - for (index=0;index<128;index+=size) - { - if (index+size>=128) - size = 128-index; - NEAREND_HLINPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 73 Index 0"); -#endif - } - else{ - memcpy(&pts.adslATUCSubcarrierInfo_pt->HLINpsus[index],&RxMessage[4],size*2); -#if 0 - int msg_idx; - for (msg_idx=0;msg_idx<size;msg_idx++) - { - printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); - } -#endif - } - } - } - - if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_HLOGMT)){ - NEAREND_HLOGMT_MAKECMV(H2D_CMV_READ); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 80 Index 0"); -#endif - pts.adslATUCSubcarrierInfo_pt->HLOGMTus = 0; - } - else{ - pts.adslATUCSubcarrierInfo_pt->HLOGMTus = RxMessage[4]; - - } - } - - ///////////////////////////////////////////////////////////////////////// - if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_HLOGPS)){ - int index=0,size=12; - //printk("NEAREND_HLOGPS\n"); - for (index=0;index<64;index+=size) - { - if (index+size>=64) - size = 64-index; - NEAREND_HLOGPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 75 Index 0"); -#endif - } - else{ -#if 0 - if (adsl_mode <0x4000)//adsl /adsl2 mode - { -#endif - memcpy(&pts.adslATUCSubcarrierInfo_pt->HLOGpsus[index],&RxMessage[4],size*2); -#if 0 - }else - { - int msg_idx=0; - for (msg_idx=0;msg_idx<size;msg_idx++) - { - //pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index+msg_idx)*2+1] = RxMessage[4+msg_idx]; - pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index+msg_idx)] = RxMessage[4+msg_idx]; - } - } -#endif - } - } -#if 0 - if (adsl_mode >= 0x4000)//adsl2 mode - { - pts.adslATUCSubcarrierInfo_pt->HLOGpsus[0] = pts.adslATUCSubcarrierInfo_pt->HLOGpsus[1]; - for (index=1;index<64;index++) - { - pts.adslATUCSubcarrierInfo_pt->HLOGpsus[index*2] = (pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index)*2-1] + pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index)*2+1]) >>1; - } - } -#endif - } - if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_QLNMT)){ - NEAREND_QLNMT_MAKECMV(H2D_CMV_READ); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 80 Index 1"); -#endif - pts.adslATUCSubcarrierInfo_pt->QLNMTus = 0; - } - else{ - pts.adslATUCSubcarrierInfo_pt->QLNMTus = RxMessage[4]; - } - } - - ///////////////////////////////////////////////////////////////////////// - if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_QLNPS)){ - int index=0,size=12; - //printk("NEAREND_QLNPS\n"); - for (index=0;index<32;index+=size) - { - if (index+size>=32) - size = 32-index; - NEAREND_QLNPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 77 Index 0"); -#endif - } - else{ - int msg_idx=0; - for (msg_idx=0;msg_idx<size;msg_idx++) - { - -#if 0 - //memcpy(&pts.adslATUCSubcarrierInfo_pt->QLNpsds[index],&RxMessage[4],size*2); - if (adsl_mode == 0x200 || adsl_mode == 0x800 || adsl_mode ==0x2000 || adsl_mode ==0x4000 || (adsl_mode == 0 && (adsl_mode_extend == 0x4 || adsl_mode_extend == 0x2))//ADSL 2 Annex B(0x200)/J(0x800)/M(0x2000) //ADSL 2+ B,J,M - if (adsl_mode < 0x4000 && adsl_mode_extend==0)//adsl2 mode - { - pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*4+1] = (u16)(RxMessage[4+msg_idx]&0xFF); - pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*4+3] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF); - }else -#endif - { - pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF); - pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF); - //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); - } - } - - - } - } -#if 0 - //if (adsl_mode <0x4000)//Annex I/J/L/M - if (adsl_mode == 0x200 || adsl_mode == 0x800 || adsl_mode ==0x2000 || adsl_mode ==0x4000 || (adsl_mode == 0 && (adsl_mode_extend == 0x4 || adsl_mode_extend == 0x2))//ADSL 2 Annex B(0x200)/J(0x800)/M(0x2000) //ADSL 2+ B,J,M - { - pts.adslATUCSubcarrierInfo_pt->QLNpsus[0] = pts.adslATUCSubcarrierInfo_pt->QLNpsus[1]; - for (index=1;index<64;index++) - { - pts.adslATUCSubcarrierInfo_pt->QLNpsus[index*2] = (pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index)*2-1] + pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index)*2+1]) >>1; - } - } -#endif - } - if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_SNRMT)){ - NEAREND_SNRMT_MAKECMV(H2D_CMV_READ); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 80 Index 2"); -#endif - pts.adslATUCSubcarrierInfo_pt->SNRMTus = 0; - } - else{ - pts.adslATUCSubcarrierInfo_pt->SNRMTus = RxMessage[4]; - } - } - if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_SNRPS)){ - int index=0,size=12; - //printk("NEAREND_SNRPS\n"); - for (index=0;index<64;index+=size) - { - if (index+size>=64) - size = 64-index; - NEAREND_SNRPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 78 Index 0"); -#endif - } - else{ - //memcpy(&pts.adslATUCSubcarrierInfo_pt->SNRpsus[index],&RxMessage[4],size*2); - int msg_idx=0; - for (msg_idx=0;msg_idx<size;msg_idx++) - { - pts.adslATUCSubcarrierInfo_pt->SNRpsus[index+msg_idx] = (u16)(RxMessage[4+msg_idx]&0xFF); - //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); - } - - } - } - } - if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_BITPS)){ - int index=0,size=12; - //printk("NEAREND_BITPS\n"); - for (index=0;index<32;index+=size) - { - if (index+size>=32) - size = 32-index; - NEAREND_BITPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 22 Index 0"); -#endif - } - else{ - int msg_idx=0; - for (msg_idx=0;msg_idx<size;msg_idx++) - { - pts.adslATUCSubcarrierInfo_pt->BITpsus[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF); - pts.adslATUCSubcarrierInfo_pt->BITpsus[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF); - //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); - } - - } - } - } - if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_GAINPS)){ - int index=0,size=12; - //printk("NEAREND_GAINPS\n"); - for (index=0;index<64;index+=size) - { - if (index+size>=64) - size = 64-index; - NEAREND_GAINPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 24 Index 0"); -#endif - } - else{ - /* - int msg_idx=0; - for (msg_idx=0;msg_idx<size;msg_idx++) - { - pts.adslATUCSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2] = RxMessage[4+msg_idx]&0xFF; - pts.adslATUCSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2+1] = (RxMessage[4+msg_idx]>>8)&0xFF; - - } - */ - memcpy(&pts.adslATUCSubcarrierInfo_pt->GAINpsus[index],&RxMessage[4],size*2); -#if 0 - int msg_idx; - for (msg_idx=0;msg_idx<size;msg_idx++) - { - printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); - } -#endif - } - } - } - copy_to_user((char *)lon, (char *)pts.adslATUCSubcarrierInfo_pt, sizeof(adslATUCSubcarrierInfo)); - kfree(pts.adslATUCSubcarrierInfo_pt); - up(&mei_sema); - break; - case GET_ADSL_LINE_INIT_STATS: - copy_to_user((char *)lon, (char *)&AdslInitStatsData, sizeof(AdslInitStatsData)); - break; - - case GET_ADSL_POWER_SPECTRAL_DENSITY: - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - i=0; - pts.adslPowerSpectralDensity_pt = (adslPowerSpectralDensity *)kmalloc(sizeof(adslPowerSpectralDensity), GFP_KERNEL); - memset((char *)pts.adslPowerSpectralDensity_pt, 0, sizeof(adslPowerSpectralDensity)); - - //US - NOMPSD_US_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - i=-1; - } - else{ - j=RxMessage[4]; - } - PCB_US_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - i=-1; - } - else{ - temp=RxMessage[4]; - } - RMSGI_US_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - i=-1; - } - else{ - k=(int16_t)RxMessage[4]; - } - if (i==0) - { - pts.adslPowerSpectralDensity_pt->ACTPSDus = ((int )(j*256 - temp*10*256 + k*10)) /256; - } - // DS - i=0; - j=temp=temp2=0; - NOMPSD_DS_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - i=-1; - } - else{ - j=RxMessage[4]; - } - PCB_DS_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - i=-1; - } - else{ - temp=RxMessage[4]; - } - RMSGI_DS_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - i=-1; - } - else{ - //temp2=RxMessage[4]; - k=(int16_t)RxMessage[4]; - } - if (i==0) - { - pts.adslPowerSpectralDensity_pt->ACTPSDds = ((int )(j*256 - temp*10*256 + k*10)) /256; - } - copy_to_user((char *)lon, (char *)pts.adslPowerSpectralDensity_pt, sizeof(adslPowerSpectralDensity)); - kfree(pts.adslPowerSpectralDensity_pt); - up(&mei_sema); - break; - case AMAZON_MEI_START: - showtime=0; - loop_diagnostics_completed = 0; -#ifdef ARC_READY_ACK -#ifdef LOCK_RETRY - i=0; -lock_retry: - if(down_trylock(&mei_sema)!=0) - { - reboot_lock = 1; - printk("lock fail\n"); - i++; - if (i <=5) - { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(10); - goto lock_retry; - }else - { - printk("Force to Reboot ADSL!\n"); - up(&mei_sema); - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1000); - sema_init(&mei_sema, 1); // semaphore initialization, mutex - } - }else - { - reboot_lock = 1; - } -#else - if(down_interruptible(&mei_sema)) //disable CMV access until ARC ready - { - return -ERESTARTSYS; - } -#endif -#endif - //CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON - if(chantype.interleave==1){ - kfree(interleave_mei_net.priv); - unregister_netdev(&interleave_mei_net); - } - else if(chantype.fast==1){ - kfree(fast_mei_net.priv); - unregister_netdev(&fast_mei_net); - } - chantype.interleave=0; - chantype.fast=0; - meiMailboxInterruptsDisable(); //disable all MEI interrupts - if(mei_arc_swap_buff == NULL){ - mei_arc_swap_buff = (u32 *)kmalloc(MAXSWAPSIZE*4, GFP_KERNEL); - if(mei_arc_swap_buff==NULL){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n malloc fail for codeswap buff"); -#endif - meierr=MEI_FAILURE; - } - } - if(meiForceRebootAdslModem() != MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n meiForceRebootAdslModem() error..."); -#endif - meierr=MEI_FAILURE; - } - interruptible_sleep_on(&wait_queue_codeswap); - // reset is called - break; - case AMAZON_MEI_MIB_DAEMON: -#ifdef IFX_SMALL_FOOTPRINT /* [ */ - return -1; -#else /* ][ !IFX_SMALL_FOOTPRINT */ - i=0; - while(1){ - if(i<MIB_INTERVAL) - interruptible_sleep_on_timeout(&wait_queue_mibdaemon, ((MIB_INTERVAL-i)/(1000/HZ))); - i=0; - if(showtime==1){ -// printk("\n\n update mib"); - - do_gettimeofday(&time_now); - if(time_now.tv_sec - current_intvl->start_time.tv_sec>=900){ - if(current_intvl->list.next!=&interval_list){ - current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list); - do_gettimeofday(&(current_intvl->start_time)); - } - else{ - mib_ptr = list_entry(interval_list.next, amazon_mei_mib, list); - list_del(interval_list.next); - memset(mib_ptr, 0, sizeof(amazon_mei_mib)); - list_add_tail(&(mib_ptr->list), &interval_list); - if(current_intvl->list.next==&interval_list) -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nlink list error"); -#endif - current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list); - do_gettimeofday(&(current_intvl->start_time)); - } - } - - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; -/* - ATUC_PERF_LO_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 0 Index 0"); -#endif - } - else{ - if(RxMessage[4]&PLAM_LOS_FailureBit){ - current_intvl->AtucPerfLos++; - ATUC_PERF_LOSS++; - CurrStatus.adslAtucCurrStatus = 2; - } - if(RxMessage[4]&PLAM_LOF_FailureBit){ - current_intvl->AtucPerfLof++; - ATUC_PERF_LOFS++; - CurrStatus.adslAtucCurrStatus = 1; - } - if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit))) - CurrStatus.adslAtucCurrStatus = 0; - } -*/ - ATUC_PERF_ESS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 7 Index 0"); -#endif - } - else{ - temp = RxMessage[4]-mib_pread.ATUC_PERF_ESS; - if(temp>=0){ - current_intvl->AtucPerfEs+=temp; - ATUC_PERF_ESS+=temp; - mib_pread.ATUC_PERF_ESS = RxMessage[4]; - } - else{ - current_intvl->AtucPerfEs+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4]; - ATUC_PERF_ESS+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4]; - mib_pread.ATUC_PERF_ESS = RxMessage[4]; - } - } -/* - ATUR_PERF_LO_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 1 Index 0"); -#endif - } - else{ - if(RxMessage[4]&PLAM_LOS_FailureBit){ - current_intvl->AturPerfLos++; - ATUR_PERF_LOSS++; - CurrStatus.adslAturCurrStatus = 2; - } - if(RxMessage[4]&PLAM_LOF_FailureBit){ - current_intvl->AturPerfLof++; - ATUR_PERF_LOFS++; - CurrStatus.adslAturCurrStatus = 1; - } - if(RxMessage[4]&PLAM_LPR_FailureBit){ - current_intvl->AturPerfLpr++; - ATUR_PERF_LPR++; - CurrStatus.adslAturCurrStatus = 3; - } - if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit|PLAM_LPR_FailureBit))) - CurrStatus.adslAturCurrStatus = 0; - } -*/ - ATUR_PERF_ESS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 33 Index 0"); -#endif - } - else{ - temp = RxMessage[4]-mib_pread.ATUR_PERF_ESS; - if(temp>=0){ - current_intvl->AturPerfEs+=temp; - ATUR_PERF_ESS+=temp; - mib_pread.ATUR_PERF_ESS = RxMessage[4]; - } - else{ - current_intvl->AturPerfEs+=0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4]; - ATUR_PERF_ESS+= 0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4]; - mib_pread.ATUR_PERF_ESS=RxMessage[4]; - } - } - // to update rx/tx blocks - ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 20 Index 0"); -#endif - } - else{ - temp = RxMessage[4]; - } - ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 21 Index 0"); -#endif - } - else{ - temp2 = RxMessage[4]; - } - if((temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK)>=0){ - current_intvl->AturChanPerfRxBlk+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK; - ATUR_CHAN_RECV_BLK+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK; - mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16); - } - else{ - current_intvl->AturChanPerfRxBlk+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16)); - ATUR_CHAN_RECV_BLK+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16)); - mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16); - } - current_intvl->AturChanPerfTxBlk = current_intvl->AturChanPerfRxBlk; - ATUR_CHAN_TX_BLK = ATUR_CHAN_RECV_BLK; -/* - ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS) - printk("\n\nCMV fail, Group 7 Address 20 Index 0"); - else{ - if(RxMessage[4]){ - current_intvl->AturChanPerfTxBlk+=RxMessage[4]; - ATUR_CHAN_TX_BLK+=RxMessage[4]; - } - } - ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS) - printk("\n\nCMV fail, Group 7 Address 21 Index 0"); - else{ - if(RxMessage[4]){ - current_intvl->AturChanPerfTxBlk+=(int)((RxMessage[4])<<16); - ATUR_CHAN_TX_BLK+=(int)((RxMessage[4])<<16); - } - } -*/ - if(chantype.interleave == 1){ - ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 3 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_INTL; - if(temp>=0){ - current_intvl->AturChanPerfCorrBlk+=temp; - ATUR_CHAN_CORR_BLK+=temp; - mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4]; - } - else{ - current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4]; - ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4]; - mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4]; - } - } - } - else if(chantype.fast == 1){ - ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 3 Index 1"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_FAST; - if(temp>=0){ - current_intvl->AturChanPerfCorrBlk+=temp; - ATUR_CHAN_CORR_BLK+=temp; - mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4]; - } - else{ - current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4]; - ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4]; - mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4]; - } - } - } - - if(chantype.interleave == 1){ - ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 2 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL; - if(temp>=0){ - current_intvl->AturChanPerfUncorrBlk+=temp; - ATUR_CHAN_UNCORR_BLK+=temp; - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4]; - } - else{ - current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4]; - ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4]; - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4]; - } - } - } - else if(chantype.fast == 1){ - ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 2 Index 1"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST; - if(temp>=0){ - current_intvl->AturChanPerfUncorrBlk+=temp; - ATUR_CHAN_UNCORR_BLK+=temp; - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4]; - } - else{ - current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4]; - ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4]; - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4]; - } - } - } - - //RFC-3440 - -#ifdef AMAZON_MEI_MIB_RFC3440 - ATUC_PERF_STAT_FASTR_FLAG_MAKECMV; //??? - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 0 Address 0 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FASTR; - if(temp>=0){ - current_intvl->AtucPerfStatFastR+=temp; - ATUC_PERF_STAT_FASTR+=temp; - mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4]; - ATUC_PERF_STAT_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4]; - mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4]; - } - } - ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV; //??? - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 0 Address 0 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FAILED_FASTR; - if(temp>=0){ - current_intvl->AtucPerfStatFailedFastR+=temp; - ATUC_PERF_STAT_FAILED_FASTR+=temp; - mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatFailedFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4]; - ATUC_PERF_STAT_FAILED_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4]; - mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4]; - } - } - ATUC_PERF_STAT_SESL_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 8 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_SESL; - if(temp>=0){ - current_intvl->AtucPerfStatSesL+=temp; - ATUC_PERF_STAT_SESL+=temp; - mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatSesL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4]; - ATUC_PERF_STAT_SESL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4]; - mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4]; - } - } - ATUC_PERF_STAT_UASL_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 10 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_UASL; - if(temp>=0){ - current_intvl->AtucPerfStatUasL+=temp; - ATUC_PERF_STAT_UASL+=temp; - mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4]; - ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4]; - mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4]; - } - } - ATUR_PERF_STAT_SESL_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 34 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_PERF_STAT_SESL; - if(temp>=0){ - current_intvl->AtucPerfStatUasL+=temp; - ATUC_PERF_STAT_UASL+=temp; - mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4]; - ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4]; - mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4]; - } - } - -#endif - up(&mei_sema); - - do_gettimeofday(&time_fini); - i = ((int)((time_fini.tv_sec-time_now.tv_sec)*1000)) + ((int)((time_fini.tv_usec-time_now.tv_usec)/1000)) ; //msec - }//showtime==1 - } - break; -#endif /* ] !IFX_SMALL_FOOTPRINT */ - case AMAZON_MEI_RESET: - case AMAZON_MEI_REBOOT: - case AMAZON_MEI_SHOWTIME: -/* if(mei_arc_swap_buff !=NULL){ - kfree(mei_arc_swap_buff); - mei_arc_swap_buff=NULL; - } - if(image_buffer !=NULL){ -// kfree(image_buffer); - vfree(image_buffer); - image_buffer =NULL; - } -*/ - if(clreoc_command_pkt !=NULL){ - kfree(clreoc_command_pkt); - clreoc_command_pkt =NULL; - } - for(i=0;i<CLREOC_BUFF_SIZE;i++) - clreoc_pkt[i].len=0; //flush all remaining clreoc commands in buffer -/* - memset(mei_mib, 0, (sizeof(amazon_mei_mib)*INTERVAL_NUM)); - INIT_LIST_HEAD(&interval_list); - for(i=0;i<INTERVAL_NUM;i++) - list_add_tail(&(mei_mib[i].list), &interval_list); - current_intvl = list_entry(interval_list.next, amazon_mei_mib, list); - do_gettimeofday(&(current_intvl->start_time)); - ATUC_PERF_LOFS=0; - ATUC_PERF_LOSS=0; - ATUC_PERF_ESS=0; - ATUC_PERF_INITS=0; - ATUR_PERF_LOFS=0; - ATUR_PERF_LOSS=0; - ATUR_PERF_LPR=0; - ATUR_PERF_ESS=0; - ATUR_CHAN_RECV_BLK=0; - ATUR_CHAN_TX_BLK=0; - ATUR_CHAN_CORR_BLK=0; - ATUR_CHAN_UNCORR_BLK=0; - memset((((u8 *)&AlarmConfProfile)+32), 0, 16*4); - AlarmConfProfile.adslLineAlarmConfProfileRowStatus=1; -*/ - PrevTxRate.adslAtucChanPrevTxRate=0; - PrevTxRate.adslAturChanPrevTxRate=0; - CurrStatus.adslAtucCurrStatus=0; - CurrStatus.adslAturCurrStatus=0; - - if((command==AMAZON_MEI_RESET) || (command==AMAZON_MEI_REBOOT)){ -#ifdef AMAZON_CHECK_LINK - if (adsl_link_notify){ - (*adsl_link_notify)(0); - } -#endif - showtime=0; - //CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON - // disconnect net_dev - if(chantype.interleave==1){ - kfree(interleave_mei_net.priv); - unregister_netdev(&interleave_mei_net); -// if(unregister_netdev(&interleave_mei_net)!=0) -// printk("\n unregister interleave fail"); - } - else if(chantype.fast==1){ - kfree(fast_mei_net.priv); - unregister_netdev(&fast_mei_net); -// if(unregister_netdev(&fast_mei_net)!=0) -// printk("\n unregister fast fail"); - } - chantype.interleave=0; - chantype.fast=0; -// 603221:tc.chen start - chantype.bearchannel0 = 0; - chantype.bearchannel1 = 0; - adsl_mode = 0; -// 603221:tc.chen end - - while(1){ - - makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, NULL); //maximum allowed tx message length, in bytes - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ - //printk("AdslInitStatsData.FullInitializationCount++\n"); - AdslInitStatsData.FullInitializationCount++; - //printk("AdslInitStatsData.FailedFullInitializationCount++\n"); - AdslInitStatsData.FailedFullInitializationCount++; - //printk("AdslInitStatsData.LINIT_Errors++\n"); - AdslInitStatsData.LINIT_Errors++; - }else - { - //printk("RxMessage=%X\n",RxMessage[4]); - if ( RxMessage[4]!=0x1) - { - //printk("AdslInitStatsData.FullInitializationCount++\n"); - AdslInitStatsData.FullInitializationCount++; - if ( RxMessage[4] != 0x7) - { - //printk("AdslInitStatsData.LINIT_Errors++\n"); - AdslInitStatsData.LINIT_Errors++; - //printk("AdslInitStatsData.FailedFullInitializationCount++\n"); - AdslInitStatsData.FailedFullInitializationCount++; - - } - } - } - - reboot_flag=0; - wake_up_interruptible(&wait_queue_codeswap); //wake up codeswap daemon - - interruptible_sleep_on_timeout(&wait_queue_reboot, 1*HZ); // sleep until arc ready -#ifdef ARC_READY_ACK - if(reboot_flag!=0) - break; - else - { - up(&mei_sema); - printk("\n reboot retry"); - } -#else - break; -#endif - } - } - else{ //AMAZON_MEI_SHOWTIME - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - // clreoc stuff - makeCMV(H2D_CMV_READ, INFO, 83, 0, 1, data); //maximum allowed tx message length, in bytes - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 83 Index 0"); -#endif - } - else{ - clreoc_max_tx_len = (int)RxMessage[4]; - clreoc_command_pkt = kmalloc((clreoc_max_tx_len*CLREOC_BUFF_SIZE), GFP_KERNEL); - if(clreoc_command_pkt == NULL){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("kmalloc error for clreoc_command_pkt\n\n"); -#endif - up(&mei_sema); - return -1; - } - for(i=0;i<CLREOC_BUFF_SIZE;i++){ - clreoc_pkt[i].command = (u8 *)(((u8 *)clreoc_command_pkt) + (clreoc_max_tx_len*i)); - clreoc_pkt[i].len=0; - } - } - - // decide what channel, then register - makeCMV(H2D_CMV_READ, STAT, 12, 0, 1, data); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 2 Address 12 Index 0"); -#endif - } - else{ - if((RxMessage[4]&0x1)==1){ - if(register_netdev(&interleave_mei_net)!=0){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n Register interleave Device Failed."); -#endif - } - else{ - chantype.interleave = 1; - chantype.fast= 0; -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n channel is interleave"); -#endif - } - } - else if((RxMessage[4]&0x2)==2){ - if(register_netdev(&fast_mei_net)!=0){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n Register fast Device Failed."); -#endif - } - else{ - chantype.fast = 1; - chantype.interleave = 0; -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n channel is fast"); -#endif - } - } - else{ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\nunknown channel type, 0x%8x", RxMessage[4]); -#endif - } -// 603221:tc.chen start - if ( (RxMessage[4]&0x100) == 0x100) - { - chantype.bearchannel0 = 1; - }else if ( (RxMessage[4]&0x100) == 0x200) - { - chantype.bearchannel1 = 1; - } -// 603221:tc.chen end - } -// 603221:tc.chen start - // read adsl mode - makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group STAT Address 1 Index 0"); -#endif - } - adsl_mode = RxMessage[4]; -// 603221:tc.chen end - makeCMV(H2D_CMV_READ, STAT, 17, 0, 1, data); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group STAT Address 1 Index 0"); -#endif - } - adsl_mode_extend = RxMessage[4]; - - // update previous channel tx rate - ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 6 Address 1 Index 0"); -#endif - PrevTxRate.adslAtucChanPrevTxRate = 0; - } - else{ - PrevTxRate.adslAtucChanPrevTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 6 Address 0 Index 0"); -#endif - PrevTxRate.adslAturChanPrevTxRate = 0; - } - else{ - PrevTxRate.adslAturChanPrevTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - -// up(&mei_sema); - -// showtime=1; - //SET_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO OFF -//dying gasp -start -#ifdef IFX_DYING_GASP - lop_debugwr.buffer[0]=0xffffffff; //dying gasp - lop_debugwr.iCount=1; //dying gasp - makeCMV(H2D_CMV_READ, INFO, 66, 4, 1, NULL); - //mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &RxMessage); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 66 Index 4"); - } -#endif - lop_debugwr.iAddress=(u32)RxMessage[4]; - makeCMV(H2D_CMV_READ, INFO, 66, 5, 1, NULL); - //mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &RxMessage); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 66 Index 5"); - } -#endif - lop_debugwr.iAddress+=((u32)RxMessage[4])<<16; - -//dying gasp -end -#endif // IFX_DYING_GASP - -//joelin 04/16/2005-start - makeCMV(H2D_CMV_WRITE, PLAM, 10, 0, 1, &unavailable_seconds); - //mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &RxMessage); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 10 Index 0"); - -#endif - } - - -//joelin 04/16/2005-end - showtime=1; - up(&mei_sema); -#ifdef AMAZON_CHECK_LINK - if (adsl_link_notify){ - (*adsl_link_notify)(1); - } -#endif - - - } - break; -/* - case AMAZON_MEI_REPLY: - copy_from_user((char *)buff, (char *)lon, MSG_LENGTH * 2); - if(meiCMV(buff, YES_REPLY) != MEI_SUCCESS){ - printk("\n\n meiCMV no reply back"); - meierr=MEI_FAILURE; - } - else - copy_to_user((char *)lon, (char *)RxMessage, MSG_LENGTH * 2); - break; - case AMAZON_MEI_NOREPLY: - copy_from_user((char *)buff, (char *)lon, MSG_LENGTH * 2); - if(meiCMV(buff, NO_REPLY) != MEI_SUCCESS){ - printk("\n\n meiCMV Host to DSP failed"); - meierr=MEI_FAILURE; - } - break; -*/ - - case AMAZON_MEI_HALT: - meiHaltArc(); - break; - case AMAZON_MEI_CMV_WINHOST: - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - if (!from_kernel ) - copy_from_user((char *)TxMessage, (char *)lon, MSG_LENGTH*2);//joelin - else - memcpy(TxMessage,(char *)lon,MSG_LENGTH*2); - -#if 0 -// if((TxMessage[0]&0xff0)==0x0a0){ - for(i=0;i<16;i++){ - printk("\nTxMessage[%i]=%8x", i, TxMessage[i]); - } -// } -#endif - - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON -// printk("\n\n WINHOST CMV fail "); - printk("\n\nWINHOST CMV fail :TxMessage:%X %X %X %X, RxMessage:%X %X %X %X %X\n",TxMessage[0],TxMessage[1],TxMessage[2],TxMessage[3],RxMessage[0],RxMessage[1],RxMessage[2],RxMessage[3],RxMessage[4]); -#endif - meierr = MEI_FAILURE; - } - else - { - if (!from_kernel ) //joelin - copy_to_user((char *)lon, (char *)RxMessage, MSG_LENGTH*2); - else - memcpy((char *)lon,(char *)RxMessage,MSG_LENGTH*2); - } - - up(&mei_sema); - break; -#ifdef AMAZON_MEI_CMV_EXTRA - case AMAZON_MEI_CMV_READ: - copy_from_user((char *)(®rdwr), (char *)lon, sizeof(meireg)); - meiLongwordRead(regrdwr.iAddress, &(regrdwr.iData)); - { -// printk("\n\n iAddress = %8x",regrdwr.iAddress); - } - copy_to_user((char *)lon, (char *)(®rdwr), sizeof(meireg)); - { -// printk("\n\n iData readback = %8x", regrdwr.iData); - } - break; -#endif - -#ifdef AMAZON_MEI_CMV_EXTRA - case AMAZON_MEI_CMV_WRITE: - copy_from_user((char *)(®rdwr), (char *)lon, sizeof(meireg)); - { -// printk("\n\n iAddress = %8x",regrdwr.iAddress); -// printk("\n\n iData = %8x",regrdwr.iData); - } - meiLongwordWrite(regrdwr.iAddress, regrdwr.iData); - break; -#endif - -#ifdef AMAZON_MEI_CMV_EXTRA - case AMAZON_MEI_REMOTE: - copy_from_user((char *)(&i), (char *)lon, sizeof(int)); - if(i==0){ - meiMailboxInterruptsEnable(); - - up(&mei_sema); - } - else if(i==1){ - meiMailboxInterruptsDisable(); - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - } - else{ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n AMAZON_MEI_REMOTE argument error"); -#endif - meierr=MEI_FAILURE; - } - break; -#endif - -#ifdef AMAZON_MEI_CMV_EXTRA - case AMAZON_MEI_READDEBUG: - case AMAZON_MEI_WRITEDEBUG: - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; -#ifdef IFX_DYING_GASP - if (!from_kernel) copy_from_user((char *)(&debugrdwr), (char *)lon, sizeof(debugrdwr));//dying gasp - else memcpy((char *)(&debugrdwr), (char *)lon, sizeof(debugrdwr)); -#else //IFX_DYING_GASP - copy_from_user((char *)(&debugrdwr), (char *)lon, sizeof(debugrdwr)); - -#endif //IFX_DYING_GASP -#if 0 - printk("\nIN iAddress: %8x, iCount:%8x\n", debugrdwr.iAddress, debugrdwr.iCount); -#endif - - if(command==AMAZON_MEI_READDEBUG) - meiDebugRead(debugrdwr.iAddress, debugrdwr.buffer, debugrdwr.iCount); - else - meiDebugWrite(debugrdwr.iAddress, debugrdwr.buffer, debugrdwr.iCount); - -#ifdef IFX_DYING_GASP - if (!from_kernel) copy_to_user((char *)lon, (char*)(&debugrdwr), sizeof(debugrdwr));//dying gasp -#else //IFX_DYING_GASP - copy_to_user((char *)lon, (char*)(&debugrdwr), sizeof(debugrdwr)); -#endif //IFX_DYING_GASP - up(&mei_sema); - -#if 0 - printk("\nOUT iAddress: %8x, iCount:%8x\n", debugrdwr.iAddress, debugrdwr.iCount); - for(i=0;i<debugrdwr.iCount;i++) - printk("\n %8x",debugrdwr.buffer[i]); -#endif - break; -#endif - - case AMAZON_MEI_LOP: - //GPIO31 :dying gasp event indication - // (1) logic high: dying gasp event is false (default) - // (2) logic low: dying gasp event is true -#ifdef IFX_DYING_GASP - break; -#else - CLEAR_BIT((*((volatile u32 *)0xB0100B48)), 0x8000); - CLEAR_BIT((*((volatile u32 *)0xB0100B4C)), 0x8000); - CLEAR_BIT((*((volatile u32 *)0xB0100B50)), 0x8000); - SET_BIT((*((volatile u32 *)0xB0100B54)), 0x8000); - asm("SYNC"); - if(((*((volatile u32 *)0xB0100B44))&0x8000)==0x0) - meierr=MEI_FAILURE; //return - to indicate loss of power - break; -#endif //#ifdef IFX_DYING_GASP - - //for PCM - case AMAZON_MEI_PCM_SETUP: - //gpio - - *AMAZON_GPIO_P0_DIR |=1<<15; - *AMAZON_GPIO_P0_ALTSEL0 |=1<<15; - *AMAZON_GPIO_P0_ALTSEL1 &=~(1<<15); - *AMAZON_GPIO_P0_OD |=1<<15; - - /*GPIO 16 TDM_DI*/ - *AMAZON_GPIO_P1_DIR &=~1; - *AMAZON_GPIO_P1_ALTSEL0 |=1; - *AMAZON_GPIO_P1_ALTSEL1 &=~1; - - /*GPIO 17 TDM_DCL */ - *AMAZON_GPIO_P1_DIR|=0x02; - *AMAZON_GPIO_P1_ALTSEL0|=0x02; - *AMAZON_GPIO_P1_ALTSEL1 &=(u32)~0x02; - *AMAZON_GPIO_P1_OD|=0x02; - - /*GPIO 18 TDM FSC*/ - *AMAZON_GPIO_P1_DIR|=0x04; - *AMAZON_GPIO_P1_ALTSEL0|=0x04; - *AMAZON_GPIO_P1_ALTSEL1 &=(u32)~0x04; - *AMAZON_GPIO_P1_OD|=0x04; - - for(i=0;i<2;i++){ - for(j=0;j<256;j++) - sampledata[i*256+j]=j; - } - - pcm_start_addr = lon; - - printk("\n\n pcm_start_addr is %8x", lon); - - for(i=0;i<PCM_CHANNEL_NUM;i++){ -#ifdef PCM_ACCESS_DEBUG - meiDebugRead_16((pcm_start_addr+i*16), (u32*)(pcm_data+i), 4); -#else - meiDMARead_16((pcm_start_addr+i*16), (u32*)(pcm_data+i), 4); -#endif - if((pcm_data[i].S!=8)||(pcm_data[i].len<1)||(pcm_data[i].rdindex!=0)||(pcm_data[i].wrindex!=0)||(pcm_data[i].flow!=0)) - printk("\n\n pcm_data fill in wrongly\n\n"); - printk("\npcm_data %d",i); - printk("\n S = %d", pcm_data[i].S); - printk("\n LSW = %4x", pcm_data[i].LSW); - printk("\n MSW = %4x", pcm_data[i].MSW); - printk("\n len = %d", pcm_data[i].len); - printk("\n rdindex = %d", pcm_data[i].rdindex); - printk("\n wrindex = %d", pcm_data[i].wrindex); - printk("\n flow = %d", pcm_data[i].flow); - pcm_data[i].finish=0; - if(i%2==0){//tx channel - for(j=0;j<PCM_BUFF_SIZE/256;j++){ - for(k=0;k<256;k++){ - pcm_data[i].buff[j*256+k]=k; - /* if(k%2==0) - pcm_data[i].buff[j*256+k]=0xaa; - else - pcm_data[i].buff[j*256+k]=0x55;*/ - } - } -#ifdef PCM_ACCESS_DEBUG - meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16)), (u32*)(pcm_data[i].buff),((pcm_data[i].len/4)/2));//fill half first -// meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16)), (u32*)(pcm_data[i].buff),2);//fill half first -#else - meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16)), (u32*)(pcm_data[i].buff),((pcm_data[i].len/4)/2));//fill half first -// meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16)), (u32*)(pcm_data[i].buff),2);//fill half first -#endif - pcm_data[i].point=(pcm_data[i].len)/2; -// pcm_data[i].point=8; -#ifdef PCM_ACCESS_DEBUG - meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1); -#else - meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1); -#endif - temp = (temp &0xffff) + (((u32)(pcm_data[i].point))<<16); -#ifdef PCM_ACCESS_DEBUG - meiDebugWrite_16(pcm_start_addr+i*16+12,&temp, 1);//update wrindex -#else - meiDMAWrite_16(pcm_start_addr+i*16+12,&temp, 1);//update wrindex -#endif - } - else{// rx channel - pcm_data[i].point=0; - } - } - break; - case AMAZON_MEI_PCM_START_TIMER: - /* GPTU timer 6 */ - /* enable the timer in the PMU */ - *(AMAZON_PMU_PWDCR) = (*(AMAZON_PMU_PWDCR))| AMAZON_PMU_PWDCR_GPT|AMAZON_PMU_PWDCR_FPI; - /* setup the GPTU for timer tick f_fpi == f_gptu*/ - *(AMAZON_GPTU_CLC) = 0x100; - //reload value = fpi/(HZ * P), timer mode, Prescaler = 4 ( T6I = 000, T6BPS2 = 0) - *(AMAZON_GPTU_CAPREL) = (int)(117500000/(lon*4)); - *(AMAZON_GPTU_T6CON) = 0x80C0; - - if (request_irq(AMAZON_TIMER6_INT, amazon_timer6_interrupt_MEI,0, "hrt", NULL)!=0){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n unable to register irq for hrt!!!"); -#endif - return -1; - } - enable_irq(AMAZON_TIMER6_INT); - break; - case AMAZON_MEI_PCM_STOP_TIMER: - disable_irq(AMAZON_TIMER6_INT); - free_irq(AMAZON_TIMER6_INT, NULL); - break; - case AMAZON_MEI_PCM_CHECK: - for(i=0;i<PCM_CHANNEL_NUM;i++){ - if(pcm_data[i].finish!=1) - return 0; - } - for(i=0;i<PCM_CHANNEL_NUM/2;i++){ - j=0; - while(1){ - if((pcm_data[i*2+1].buff[j]==0x0) && (pcm_data[i*2+1].buff[j+1]==0x1)&& (pcm_data[i*2+1].buff[j+2]==0x2)) - break; - else - j++; - } - printk("\n j=%d", j); - temp=0; - for(k=0;k<((PCM_BUFF_SIZE-j)/4);k++){ - if(memcmp(pcm_data[i*2].buff+k*4, pcm_data[i*2+1].buff+j+k*4, 4)!=0){ - temp++; - printk("\n\n%2x %2x %2x %2x %2x %2x %2x %2x\n\n", *((u8*)(pcm_data[i*2].buff+k*4)), *((u8*)(pcm_data[i*2].buff+k*4+1)),*((u8*)(pcm_data[i*2].buff+k*4+2)),*((u8*)(pcm_data[i*2].buff+k*4+3)),*((u8*)(pcm_data[i*2+1].buff+j+k*4)),*((u8*)(pcm_data[i*2+1].buff+j+k*4+1)),*((u8*)(pcm_data[i*2+1].buff+j+k*4+2)),*((u8*)(pcm_data[i*2+1].buff+j+k*4+3))); - break; - } - } - if(temp!=0) - printk("\n\n Channel pair %d not match: err32 %d\n\n", i, temp); - else - printk("\n\n Channel pair %d match\n\n", i); - } - for(i=0;i<PCM_CHANNEL_NUM;i++){ - if(i%2==1){//rx channel -#ifdef PCM_ACCESS_DEBUG - meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1); -#else - meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1); -#endif - printk("\n\nRx channel %d: Overflow Bytes %d", i, (temp&0xffff)); - } - else{//tx channel -#ifdef PCM_ACCESS_DEBUG - meiDebugRead_16(pcm_start_addr+i*16, &temp, 1); -#else - meiDMARead_16(pcm_start_addr+i*16, &temp, 1); -#endif - printk("\n\nElectra Err: %d",(temp&0xffff)); - } - } - //check electra overflow - - meierr=1; - break; - case AMAZON_MEI_PCM_GETDATA: - copy_to_user(lon, pcm_data[1].buff, PCM_BUFF_SIZE); - break; - case AMAZON_MEI_PCM_GPIO: - //gpio - - *AMAZON_GPIO_P0_DIR |=1<<15; - *AMAZON_GPIO_P0_ALTSEL0 |=1<<15; - *AMAZON_GPIO_P0_ALTSEL1 &=~(1<<15); - *AMAZON_GPIO_P0_OD |=1<<15; - - /*GPIO 16 TDM_DI*/ - *AMAZON_GPIO_P1_DIR &=~1; - *AMAZON_GPIO_P1_ALTSEL0 |=1; - *AMAZON_GPIO_P1_ALTSEL1 &=~1; - - /*GPIO 17 TDM_DCL */ - *AMAZON_GPIO_P1_DIR|=0x02; - *AMAZON_GPIO_P1_ALTSEL0|=0x02; - *AMAZON_GPIO_P1_ALTSEL1 &=(u32)~0x02; - *AMAZON_GPIO_P1_OD|=0x02; - - /*GPIO 18 TDM FSC*/ - *AMAZON_GPIO_P1_DIR|=0x04; - *AMAZON_GPIO_P1_ALTSEL0|=0x04; - *AMAZON_GPIO_P1_ALTSEL1 &=(u32)~0x04; - *AMAZON_GPIO_P1_OD|=0x04; - break; - - - - //for clearEoC -#ifdef AMAZON_CLEAR_EOC - case AMAZON_MEI_GET_EOC_LEN: - while(1){ - current_clreoc = list_entry(clreoc_list.next, amazon_clreoc_pkt, list); - if((current_clreoc->len)>0){ - copy_to_user((char *)lon, (char*)(&(current_clreoc->len)), 4); - break; - } - else//wait for eoc data from higher layer - interruptible_sleep_on(&wait_queue_clreoc); - } - break; - case AMAZON_MEI_GET_EOC_DATA: - current_clreoc = list_entry(clreoc_list.next, amazon_clreoc_pkt, list); - if((current_clreoc->len)>0){ - copy_to_user((char*)lon, (char*)(current_clreoc->command), current_clreoc->len); - meierr=1; - list_del(clreoc_list.next); //remove and add to end of list - current_clreoc->len = 0; - list_add_tail(&(current_clreoc->list), &clreoc_list); - } - else - meierr=-1; - break; - case AMAZON_MEI_EOC_SEND: - copy_from_user((char *)(&debugrdwr), (char *)lon, sizeof(debugrdwr)); - eoc_skb = dev_alloc_skb(debugrdwr.iCount*4); - if(eoc_skb==NULL){ - printk("\n\nskb alloc fail"); - break; - } - - eoc_skb->len=debugrdwr.iCount*4; - memcpy(skb_put(eoc_skb, debugrdwr.iCount*4), (char *)debugrdwr.buffer, debugrdwr.iCount*4); - - ifx_push_eoc(eoc_skb); //pass data to higher layer - break; -#endif //#ifdef AMAZON_CLEAR_EOC - case AMAZON_MIB_LO_ATUC: - do_gettimeofday(&time_now); - if(lon&0x1){ - if((time_now.tv_sec-(mib_pflagtime.ATUC_PERF_LOSS_PTIME).tv_sec)>2){ - current_intvl->AtucPerfLos++; - ATUC_PERF_LOSS++; - CurrStatus.adslAtucCurrStatus = 2; - } - (mib_pflagtime.ATUC_PERF_LOSS_PTIME).tv_sec = time_now.tv_sec; - } - if(lon&0x2){ - if((time_now.tv_sec-(mib_pflagtime.ATUC_PERF_LOFS_PTIME).tv_sec)>2){ - current_intvl->AtucPerfLof++; - ATUC_PERF_LOFS++; - CurrStatus.adslAtucCurrStatus = 1; - } - (mib_pflagtime.ATUC_PERF_LOFS_PTIME).tv_sec = time_now.tv_sec; - } - if(!(lon&0x3)) - CurrStatus.adslAtucCurrStatus = 0; - break; - case AMAZON_MIB_LO_ATUR: - do_gettimeofday(&time_now); - if(lon&0x1){ - if((time_now.tv_sec-(mib_pflagtime.ATUR_PERF_LOSS_PTIME).tv_sec)>2){ - current_intvl->AturPerfLos++; - ATUR_PERF_LOSS++; - CurrStatus.adslAturCurrStatus = 2; - } - (mib_pflagtime.ATUR_PERF_LOSS_PTIME).tv_sec = time_now.tv_sec; - } - if(lon&0x2){ - if((time_now.tv_sec-(mib_pflagtime.ATUR_PERF_LOFS_PTIME).tv_sec)>2){ - current_intvl->AturPerfLof++; - ATUR_PERF_LOFS++; - CurrStatus.adslAturCurrStatus = 1; - } - (mib_pflagtime.ATUR_PERF_LOFS_PTIME).tv_sec = time_now.tv_sec; - } - if(lon&0x4){ - if((time_now.tv_sec-(mib_pflagtime.ATUR_PERF_LPR_PTIME).tv_sec)>2){ - current_intvl->AturPerfLpr++; - ATUR_PERF_LPR++; - CurrStatus.adslAturCurrStatus = 3; - } - (mib_pflagtime.ATUR_PERF_LPR_PTIME).tv_sec = time_now.tv_sec; - } - if(!(lon&0x7)) - CurrStatus.adslAturCurrStatus = 0; - break; - case AMAZON_MEI_DOWNLOAD: - // DMA the boot code page(s) -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n start download pages"); -#endif - for( boot_loop = 0; boot_loop < img_hdr->count; boot_loop++){ - if( img_hdr->page[boot_loop].p_size & BOOT_FLAG){ - page_size = meiGetPage( boot_loop, GET_PROG, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr); - if( page_size > 0){ - meiDMAWrite(dest_addr, mei_arc_swap_buff, page_size); - } - } - if( img_hdr->page[boot_loop].d_size & BOOT_FLAG){ - page_size = meiGetPage( boot_loop, GET_DATA, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr); - if( page_size > 0){ - meiDMAWrite( dest_addr, mei_arc_swap_buff, page_size); - } - } - } -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n pages downloaded"); -#endif - break; - //509221:tc.chen start - case AMAZON_MEI_DEBUG_MODE: - mei_debug_mode = lon; - break; - //509221:tc.chen end - } - return meierr; -} - - -////////////////////// Interrupt handler ///////////////////////////////////////////////////// -static void mei_interrupt_arcmsgav(int,void *,struct pt_regs *); -static void mei_interrupt_arcmsgav(int int1, void * void0, struct pt_regs * regs) -{ - u32 scratch; - u32 fetchpage; - u32 size; - u32 dest_addr; - u32 temp; - int i; - - meiDebugRead(ARC_MEI_MAILBOXR, &scratch, 1); - if(scratch & OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK) - { - if(showtime==1){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n Code Swap Request After ShowTime !!!"); -#endif - } - else{ -#ifdef AMAZON_MEI_DEBUG_ON -// printk("\n\n Code Swap Request"); -#endif - fetchpage = scratch & ~OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK; - size = meiGetPage( fetchpage, GET_PROG, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr); - if( size > 0) - { -#ifdef AMAZON_MEI_DEBUG_ON -// printk(" : prom page num %d",fetchpage); -#endif - meiDMAWrite( dest_addr, mei_arc_swap_buff, size); - } - - size = meiGetPage( fetchpage, GET_DATA, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr); - if( size > 0) - { -#ifdef AMAZON_MEI_DEBUG_ON -// printk(" : data page num %d",fetchpage); -#endif - meiDMAWrite( dest_addr, mei_arc_swap_buff, size); - } - } - // Notify arc that mailbox read complete - meiLongwordWrite(ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV); - - // Tell ARC Codeswap is done - meiLongwordWrite(MEI_TO_ARC_INT, MEI_TO_ARC_CS_DONE); - asm("SYNC"); - i=0; - while(i<WHILE_DELAY){ - meiLongwordRead(MEI_TO_ARC_INT, &temp); - if((temp & MEI_TO_ARC_CS_DONE) ==0){ -#ifdef AMAZON_MEI_DEBUG_ON -// printk("\n\n Code Swap Done"); -#endif - break; - } - i++; - if(i==WHILE_DELAY){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n MEI_TO_ARC_CS_DONE not cleared by ARC"); - //509221:tc.chen start - if (!mei_debug_mode) - { - //printk("Reset Arc!\n"); - //printk("AdslInitStatsData.FullInitializationCount++\n"); - AdslInitStatsData.FullInitializationCount++; - if (!showtime) - { - //printk("AdslInitStatsData.FailedFullInitializationCount++\n"); - AdslInitStatsData.FailedFullInitializationCount++; - //printk("AdslInitStatsData.LINIT_Errors++\n"); - AdslInitStatsData.LINIT_Errors++; - } - - wake_up_interruptible(&wait_queue_codeswap); // wait up ioctl reboot - } - //509221:tc.chen end -#endif - } - } - } - else{ // normal message -// printk("\n\n interrupt"); - meiMailboxRead(RxMessage, MSG_LENGTH); - if(cmv_waiting==1){ - arcmsgav=1; - cmv_waiting=0; - wake_up_interruptible(&wait_queue_arcmsgav); - } - else{ - indicator_count++; - memcpy((char *)Recent_indicator, (char *)RxMessage, MSG_LENGTH *2); -#ifdef ARC_READY_ACK - if(((RxMessage[0]&0xff0)>>4)==D2H_AUTONOMOUS_MODEM_READY_MSG){ //check ARC ready message - -#ifdef LOCK_RETRY - if (reboot_lock) - { - reboot_lock = 0; - up(&mei_sema); // allow cmv access - } -#else - up(&mei_sema); // allow cmv access -#endif - reboot_flag=1; -//#ifdef ADSL_LED_SUPPORT -#if 0 - led_support_check=1;//adsl led for 1.1.2.7.1.1 - adsl_led_flash();//adsl led for 1.1.2.7.1.1 -#endif - wake_up_interruptible(&wait_queue_reboot); // wait up ioctl reboot - } -#endif - } - } -// meiLongwordWrite(ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV); - mask_and_ack_amazon_irq(AMAZON_MEI_INT); - return; -} - -// 603221:tc.chen start -////////////////////////hdlc //////////////// - -// get hdlc status -static unsigned int ifx_me_hdlc_status(void) -{ - u16 CMVMSG[MSG_LENGTH]; - int ret; - - if (showtime!=1) - return -ENETRESET; - - makeCMV_local(H2D_CMV_READ, STAT, 14, 0, 1, NULL,CMVMSG); //Get HDLC status - ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - if (ret != 0) - { - return -EIO; - } - return CMVMSG[4]&0x0F; -} - -int ifx_me_is_resloved(int status) -{ - u16 CMVMSG[MSG_LENGTH]; - int ret; - - if (status == ME_HDLC_MSG_QUEUED || status == ME_HDLC_MSG_SENT) - return ME_HDLC_UNRESOLVED; - if (status == ME_HDLC_IDLE) - { - makeCMV_local(H2D_CMV_READ, CNTL, 2, 0, 1, NULL,CMVMSG); //Get ME-HDLC Control - ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - if (ret != 0) - { - return IFX_POP_EOC_FAIL; - } - if (CMVMSG[4]&(1<<0)) - { - return ME_HDLC_UNRESOLVED; - } - - } - return ME_HDLC_RESOLVED; -} - -int _ifx_me_hdlc_send(unsigned char *hdlc_pkt,int len,int max_length) -{ - int ret; - u16 CMVMSG[MSG_LENGTH]; - u16 data=0; - u16 pkt_len=len; - if (pkt_len > max_length) - { - printk("Exceed maximum eoc message length\n"); - return -ENOBUFS; - } - //while(pkt_len > 0) - { - makeCMV_local(H2D_CMV_WRITE, INFO, 81, 0, (pkt_len+1)/2,(u16 *)hdlc_pkt,CMVMSG); //Write clear eoc message to ARC - ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - if (ret != 0) - { - return -EIO; - } - - makeCMV_local(H2D_CMV_WRITE, INFO, 83, 2, 1,&pkt_len,CMVMSG); //Update tx message length - ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - if (ret != 0) - { - return -EIO; - } - - data = (1<<0); - makeCMV_local(H2D_CMV_WRITE, CNTL, 2, 0, 1,&data,CMVMSG); //Start to send - ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - if (ret != 0) - { - return -EIO; - } - return 0; - } -} - -static int ifx_me_hdlc_send(unsigned char *hdlc_pkt,int hdlc_pkt_len) -{ - int hdlc_status=0; - u16 CMVMSG[MSG_LENGTH]; - int max_hdlc_tx_length=0,ret=0,retry=0; - - while(retry<10) - { - hdlc_status = ifx_me_hdlc_status(); - if (ifx_me_is_resloved(hdlc_status)==ME_HDLC_RESOLVED) // arc ready to send HDLC message - { - makeCMV_local(H2D_CMV_READ, INFO, 83, 0, 1, NULL,CMVMSG); //Get Maximum Allowed HDLC Tx Message Length - ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - if (ret != 0) - { - return -EIO; - } - max_hdlc_tx_length = CMVMSG[4]; - ret = _ifx_me_hdlc_send(hdlc_pkt,hdlc_pkt_len,max_hdlc_tx_length); - return ret; - } - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(10); - } - return -EBUSY; -} - -int ifx_mei_hdlc_read(char *hdlc_pkt,int max_hdlc_pkt_len) -{ - u16 CMVMSG[MSG_LENGTH]; - int msg_read_len,ret=0,pkt_len=0,retry = 0; - - while(retry<10) - { - ret = ifx_me_hdlc_status(); - if (ret == ME_HDLC_RESP_RCVD) - { - int current_size=0; - makeCMV_local(H2D_CMV_READ, INFO, 83, 3, 1, NULL,CMVMSG); //Get EoC packet length - ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - if (ret != 0) - { - return -EIO; - } - - pkt_len = CMVMSG[4]; - if (pkt_len > max_hdlc_pkt_len) - { - ret = -ENOMEM; - goto error; - } - while( current_size < pkt_len) - { - if (pkt_len - current_size >(MSG_LENGTH*2-8)) - msg_read_len = (MSG_LENGTH*2-8); - else - msg_read_len = pkt_len - (current_size); - makeCMV_local(H2D_CMV_READ, INFO, 82, 0 + (current_size/2), (msg_read_len+1)/2, NULL,CMVMSG); //Get hdlc packet - ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - if (ret != 0) - { - goto error; - } - memcpy(hdlc_pkt+current_size,&CMVMSG[4],msg_read_len); - current_size +=msg_read_len; - } - ret = current_size; - break; - }else - { - ret = -ENODATA; - } - - retry++; - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(10); - - } - return ret; -error: - - return ret; -} - -////////////////////////hdlc //////////////// -// 603221:tc.chen end - -/////////////////////// clearEoC, int ifx_pop_eoc(sk_buff * pkt) ////////// -int ifx_pop_eoc(struct sk_buff * pkt); -int ifx_pop_eoc(struct sk_buff * pkt) -{ - amazon_clreoc_pkt * current; - if(showtime!=1){ - dev_kfree_skb(pkt); - return IFX_POP_EOC_FAIL; - } - if((pkt->len)>clreoc_max_tx_len){ - dev_kfree_skb(pkt); - return IFX_POP_EOC_FAIL; - } - current = list_entry(clreoc_list.next, amazon_clreoc_pkt, list); - while(1){ - if(current->len==0){ - memcpy(current->command, pkt->data, pkt->len); - current->len=pkt->len; - break; - } - else{ - if((current->list).next==&clreoc_list){ - dev_kfree_skb(pkt); - return IFX_POP_EOC_FAIL; //buffer full - } - current = list_entry((current->list).next,amazon_clreoc_pkt, list); - } - } - wake_up_interruptible(&wait_queue_clreoc); - - dev_kfree_skb(pkt); - return IFX_POP_EOC_DONE; -} -/* this is used in circular fifo mode */ -/* -int ifx_pop_eoc(sk_buff * pkt); -int ifx_pop_eoc(sk_buff * pkt) -{ - int buff_space,i; - if(showtime!=1) - return IFX_POP_EOC_FAIL; - - if(clreoc_wr>=clreoc_rd) - buff_space = (MEI_CLREOC_BUFF_SIZE-1)-(clreoc_wr - clreoc_rd); - else - buff_space = clreoc_rd - clreoc_wr - 1; - if((pkt->len)>buff_space) - return IFX_POP_EOC_FAIL; - - if((clreoc_wr+pkt->len)>MEI_CLREOC_BUFF_SIZE){ - memcpy((clreoc+clreoc_wr), pkt->data, ((clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE+1)); - memcpy(clreoc, (pkt->data)+((clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE+1), (pkt->len)-((clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE+1)); - clreoc_wr=(clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE; - } - else{ - memcpy((clreoc+clreoc_wr), pkt->data, pkt->len); - if((clreoc_wr+pkt->len)=MEI_CLREOC_BUFF_SIZE) - clreoc_wr=0; - else - clreoc_wr+=pkt->len; - } - wake_up_interruptible(&wait_queue_clreoc); - return IFX_POP_EOC_DONE; -} -*/ - - -//////////////////////////////////////////////////////////////////////////// -//int amazon_mei_init_module (void); -//void amazon_mei_cleanup_module (void); -//int __init init_module (void); -//void __exit cleanup_module (void); - -int __init amazon_mei_init_module(void) -//int __init init_module(void) -{ - struct proc_dir_entry *entry; - int i; - -//dying gasp-start -#ifdef IFX_DYING_GASP - -//000003:fchang Start -#ifdef CONFIG_CPU_AMAZON_E - //GPIO31 :dying gasp event indication - // (1) logic high: dying gasp event is false (default) - // (2) logic low: dying gasp event is true - CLEAR_BIT((*((volatile u32 *)0xB0100B18)), 0x4); - CLEAR_BIT((*((volatile u32 *)0xB0100B1c)), 0x4); - CLEAR_BIT((*((volatile u32 *)0xB0100B20)), 0x4); - SET_BIT((*((volatile u32 *)0xB0100B24)), 0x4); - asm("SYNC"); -#else //000003:fchang End - - //GPIO31 :dying gasp event indication - // (1) logic high: dying gasp event is false (default) - // (2) logic low: dying gasp event is true - CLEAR_BIT((*((volatile u32 *)0xB0100B48)), 0x8000); - CLEAR_BIT((*((volatile u32 *)0xB0100B4C)), 0x8000); - CLEAR_BIT((*((volatile u32 *)0xB0100B50)), 0x8000); - SET_BIT((*((volatile u32 *)0xB0100B54)), 0x8000); -#if 0 -//warning-led-start -//GPIO 22 - SET_BIT ((*((volatile u32 *)0xB0100B48)), 0x40); - CLEAR_BIT((*((volatile u32 *)0xB0100B4C)), 0x40); - CLEAR_BIT((*((volatile u32 *)0xB0100B50)), 0x40); - SET_BIT((*((volatile u32 *)0xB0100B54)), 0x40); - CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //GPIO ON - printk("LED ON ON ON ON ON ON....."); -//warning-led-end -#endif - asm("SYNC"); -#endif //000003:fchang - -#endif //IFX_DYING_GASP -//dying gasp -end - - - reg_entry_t regs_temp[PROC_ITEMS] = // Items being debugged - { - /* { flag, name, description } */ - { &arcmsgav, "arcmsgav", "arc to mei message ", 0 }, - { &cmv_reply, "cmv_reply", "cmv needs reply", 0}, - { &cmv_waiting, "cmv_waiting", "waiting for cmv reply from arc", 0}, - { &indicator_count, "indicator_count", "ARC to MEI indicator count", 0}, - { &cmv_count, "cmv_count", "MEI to ARC CMVs", 0}, - { &reply_count, "reply_count", "ARC to MEI Reply", 0}, - { (int *)Recent_indicator, "Recent_indicator", "most recent indicator", 0}, - { (int *)8, "version", "version of firmware", 0}, - }; - memcpy((char *)regs, (char *)regs_temp, sizeof(regs_temp)); - - - //sema_init(&mei_sema, 0); // semaphore initialization, mutex - sema_init(&mei_sema, 1); // semaphore initialization, mutex - - init_waitqueue_head(&wait_queue_arcmsgav); // for ARCMSGAV - init_waitqueue_head(&wait_queue_codeswap); // for codeswap daemon - init_waitqueue_head(&wait_queue_mibdaemon); // for mib daemon - init_waitqueue_head(&wait_queue_reboot); // for ioctl reboot - init_waitqueue_head(&wait_queue_clreoc); // for clreoc_wr function - init_waitqueue_head(&wait_queue_loop_diagnostic); // for loop diagnostic function -#ifdef ADSL_LED_SUPPORT - init_waitqueue_head(&wait_queue_led); // adsl led for led function - init_waitqueue_head(&wait_queue_led_polling); // adsl led for led function - led_task.routine = adsl_led_flash_task; // adsl led for led function - led_poll_init(); // adsl led for led function -#endif //ADSL_LED_SUPPORT -#ifdef IFX_DYING_GASP - init_waitqueue_head(&wait_queue_dying_gasp); // IFX_DYING_GASP - lop_poll_init(); // IFX_DYING_GASP -#endif //IFX_DYING_GASP - - init_waitqueue_head(&wait_queue_uas_poll);//joelin 04/16/2005 - unavailable_seconds_poll_init();//joelin 04/16/2005 - memset(&mib_pflagtime, 0, (sizeof(mib_flags_pretime))); - - // initialize link list for intervals - mei_mib = (amazon_mei_mib *)kmalloc((sizeof(amazon_mei_mib)*INTERVAL_NUM), GFP_KERNEL); - if(mei_mib == NULL){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("kmalloc error for amazon_mei_mib\n\n"); -#endif - return -1; - } - memset(mei_mib, 0, (sizeof(amazon_mei_mib)*INTERVAL_NUM)); - INIT_LIST_HEAD(&interval_list); - for(i=0;i<INTERVAL_NUM;i++) - list_add_tail(&(mei_mib[i].list), &interval_list); - current_intvl = list_entry(interval_list.next, amazon_mei_mib, list); - do_gettimeofday(&(current_intvl->start_time)); - // initialize clreoc list - clreoc_pkt = (amazon_clreoc_pkt *)kmalloc((sizeof(amazon_clreoc_pkt)*CLREOC_BUFF_SIZE), GFP_KERNEL); - if(clreoc_pkt == NULL){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("kmalloc error for clreoc_pkt\n\n"); -#endif - return -1; - } - memset(clreoc_pkt, 0, (sizeof(amazon_clreoc_pkt)*CLREOC_BUFF_SIZE)); - INIT_LIST_HEAD(&clreoc_list); - for(i=0;i<CLREOC_BUFF_SIZE;i++) - list_add_tail(&(clreoc_pkt[i].list), &clreoc_list); - - memset(&AdslInitStatsData, 0, sizeof(AdslInitStatsData)); - if (register_chrdev(major, "amazon_mei", &mei_operations)!=0) { -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n unable to register major for amazon_mei!!!"); -#endif - return -1; - } - if (request_irq(AMAZON_MEI_INT, mei_interrupt_arcmsgav,0, "amazon_mei_arcmsgav", NULL)!=0){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n unable to register irq for amazon_mei!!!"); -#endif - return -1; - } -// disable_irq(AMAZON_MEI_INT); - enable_irq(AMAZON_MEI_INT); - // procfs - meidir=proc_mkdir(MEI_DIRNAME, &proc_root); - if ( meidir == NULL) { -#ifdef AMAZON_MEI_DEBUG_ON - printk(KERN_ERR ": can't create /proc/" MEI_DIRNAME "\n\n"); -#endif - return(-ENOMEM); - } - - for(i=0;i<NUM_OF_REG_ENTRY;i++) { - entry = create_proc_entry(regs[i].name, - S_IWUSR |S_IRUSR | S_IRGRP | S_IROTH, - meidir); - if(entry) { - regs[i].low_ino = entry->low_ino; - entry->proc_fops = &proc_operations; - } else { -#ifdef AMAZON_MEI_DEBUG_ON - printk( KERN_ERR - ": can't create /proc/" MEI_DIRNAME - "/%s\n\n", regs[i].name); -#endif - return(-ENOMEM); - } - } - ///////////////////////////////// register net device //////////////////////////// - if(register_netdev(&phy_mei_net)!=0){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n Register phy Device Failed."); -#endif - return -1; - } -/* - if(register_netdev(&interleave_mei_net)!=0){ - printk("\n\n Register interleave Device Failed."); - return -1; - } - if(register_netdev(&fast_mei_net)!=0){ - printk("\n\n Register fast Device Failed."); - return -1; - } -*/ -#ifdef DFE_LOOPBACK - mei_arc_swap_buff = (u32 *)kmalloc(MAXSWAPSIZE*4, GFP_KERNEL); - if (mei_arc_swap_buff){ -#ifdef ARC_READY_ACK - if(down_interruptible(&mei_sema)) //disable CMV access until ARC ready - { - return -ERESTARTSYS; - } -#ifdef LOCK_RETRY - reboot_lock = 1; -#endif -#endif - meiForceRebootAdslModem(); - kfree(mei_arc_swap_buff); - }else{ -#ifdef AMAZON_MEI_DEBUG_ON - printk("cannot load image: no memory\n\n"); -#endif - } -#endif -#ifdef IFX_SMALL_FOOTPRINT - mib_poll_init(); -#endif - return 0; -} - -void __exit amazon_mei_cleanup_module(void) -//void __exit cleanup_module(void) -{ - int i; -#ifdef ADSL_LED_SUPPORT - stop_led_module=1; //wake up and clean led module - led_support_check=0;//joelin , clear task - showtime=0;//joelin,clear task - //CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON - firmware_support_led=0;//joelin ,clear task - wake_up_interruptible(&wait_queue_led); //wake up and clean led module - wake_up_interruptible(&wait_queue_led_polling); //wake up and clean led module -#endif - for(i=0;i<NUM_OF_REG_ENTRY;i++) - remove_proc_entry(regs[i].name, meidir); - remove_proc_entry(MEI_DIRNAME, &proc_root); - - disable_irq(AMAZON_MEI_INT); - free_irq(AMAZON_MEI_INT, NULL); - unregister_chrdev(major, "amazon_mei"); - - kfree(mei_mib); - kfree(clreoc_pkt); - - kfree(phy_mei_net.priv); - unregister_netdev(&phy_mei_net); - - return; -} -#ifdef IFX_SMALL_FOOTPRINT - - -int adsl_mib_poll(void *unused) -{ - struct task_struct *tsk = current; - int i=0; - struct timeval time_now; - struct timeval time_fini; - u32 temp,temp2; - - amazon_mei_mib * mib_ptr; -// u16 buff[MSG_LENGTH]__attribute__ ((aligned(4))); - u16 * data=NULL; //used in makeCMV, to pass in payload when CMV set, ignored when CMV read. - - daemonize(); - strcpy(tsk->comm, "kmibpoll"); - sigfillset(&tsk->blocked); - - printk("Inside mib poll loop ...\n"); - i=0; - while(1){ - if(i<MIB_INTERVAL) - interruptible_sleep_on_timeout(&wait_queue_mibdaemon, ((MIB_INTERVAL-i)/(1000/HZ))); - i=0; - if(showtime==1){ -// printk("\n\n update mib"); - - do_gettimeofday(&time_now); - if(time_now.tv_sec - current_intvl->start_time.tv_sec>=900){ - if(current_intvl->list.next!=&interval_list){ - current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list); - do_gettimeofday(&(current_intvl->start_time)); - } - else{ - mib_ptr = list_entry(interval_list.next, amazon_mei_mib, list); - list_del(interval_list.next); - memset(mib_ptr, 0, sizeof(amazon_mei_mib)); - list_add_tail(&(mib_ptr->list), &interval_list); - if(current_intvl->list.next==&interval_list) -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nlink list error"); -#endif - current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list); - do_gettimeofday(&(current_intvl->start_time)); - } - } - - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; -/* - ATUC_PERF_LO_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 0 Index 0"); -#endif - } - else{ - if(RxMessage[4]&PLAM_LOS_FailureBit){ - current_intvl->AtucPerfLos++; - ATUC_PERF_LOSS++; - CurrStatus.adslAtucCurrStatus = 2; - } - if(RxMessage[4]&PLAM_LOF_FailureBit){ - current_intvl->AtucPerfLof++; - ATUC_PERF_LOFS++; - CurrStatus.adslAtucCurrStatus = 1; - } - if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit))) - CurrStatus.adslAtucCurrStatus = 0; - } -*/ - - if(showtime!=1) - goto mib_poll_end; - ATUC_PERF_ESS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 7 Index 0"); -#endif - } - else{ - temp = RxMessage[4]-mib_pread.ATUC_PERF_ESS; - if(temp>=0){ - current_intvl->AtucPerfEs+=temp; - ATUC_PERF_ESS+=temp; - mib_pread.ATUC_PERF_ESS = RxMessage[4]; - } - else{ - current_intvl->AtucPerfEs+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4]; - ATUC_PERF_ESS+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4]; - mib_pread.ATUC_PERF_ESS = RxMessage[4]; - } - } -/* - ATUR_PERF_LO_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 1 Index 0"); -#endif - } - else{ - if(RxMessage[4]&PLAM_LOS_FailureBit){ - current_intvl->AturPerfLos++; - ATUR_PERF_LOSS++; - CurrStatus.adslAturCurrStatus = 2; - } - if(RxMessage[4]&PLAM_LOF_FailureBit){ - current_intvl->AturPerfLof++; - ATUR_PERF_LOFS++; - CurrStatus.adslAturCurrStatus = 1; - } - if(RxMessage[4]&PLAM_LPR_FailureBit){ - current_intvl->AturPerfLpr++; - ATUR_PERF_LPR++; - CurrStatus.adslAturCurrStatus = 3; - } - if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit|PLAM_LPR_FailureBit))) - CurrStatus.adslAturCurrStatus = 0; - } -*/ - if(showtime!=1) - goto mib_poll_end; - ATUR_PERF_ESS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 33 Index 0"); -#endif - } - else{ - temp = RxMessage[4]-mib_pread.ATUR_PERF_ESS; - if(temp>=0){ - current_intvl->AturPerfEs+=temp; - ATUR_PERF_ESS+=temp; - mib_pread.ATUR_PERF_ESS = RxMessage[4]; - } - else{ - current_intvl->AturPerfEs+=0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4]; - ATUR_PERF_ESS+= 0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4]; - mib_pread.ATUR_PERF_ESS=RxMessage[4]; - } - } - if(showtime!=1) - goto mib_poll_end; - // to update rx/tx blocks - ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 20 Index 0"); -#endif - } - else{ - temp = RxMessage[4]; - } - if(showtime!=1) - goto mib_poll_end; - ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 21 Index 0"); -#endif - } - else{ - temp2 = RxMessage[4]; - } - if((temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK)>=0){ - current_intvl->AturChanPerfRxBlk+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK; - ATUR_CHAN_RECV_BLK+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK; - mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16); - } - else{ - current_intvl->AturChanPerfRxBlk+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16)); - ATUR_CHAN_RECV_BLK+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16)); - mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16); - } - current_intvl->AturChanPerfTxBlk = current_intvl->AturChanPerfRxBlk; - ATUR_CHAN_TX_BLK = ATUR_CHAN_RECV_BLK; -/* - ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS) - printk("\n\nCMV fail, Group 7 Address 20 Index 0"); - else{ - if(RxMessage[4]){ - current_intvl->AturChanPerfTxBlk+=RxMessage[4]; - ATUR_CHAN_TX_BLK+=RxMessage[4]; - } - } - ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS) - printk("\n\nCMV fail, Group 7 Address 21 Index 0"); - else{ - if(RxMessage[4]){ - current_intvl->AturChanPerfTxBlk+=(int)((RxMessage[4])<<16); - ATUR_CHAN_TX_BLK+=(int)((RxMessage[4])<<16); - } - } -*/ - if(chantype.interleave == 1){ - if(showtime!=1) - goto mib_poll_end; - ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 3 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_INTL; - if(temp>=0){ - current_intvl->AturChanPerfCorrBlk+=temp; - ATUR_CHAN_CORR_BLK+=temp; - mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4]; - } - else{ - current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4]; - ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4]; - mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4]; - } - } - } - else if(chantype.fast == 1){ - if(showtime!=1) - goto mib_poll_end; - ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 3 Index 1"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_FAST; - if(temp>=0){ - current_intvl->AturChanPerfCorrBlk+=temp; - ATUR_CHAN_CORR_BLK+=temp; - mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4]; - } - else{ - current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4]; - ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4]; - mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4]; - } - } - } - - if(chantype.interleave == 1){ - if(showtime!=1) - goto mib_poll_end; - ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 2 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL; - if(temp>=0){ - current_intvl->AturChanPerfUncorrBlk+=temp; - ATUR_CHAN_UNCORR_BLK+=temp; - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4]; - } - else{ - current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4]; - ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4]; - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4]; - } - } - } - else if(chantype.fast == 1){ - if(showtime!=1) - goto mib_poll_end; - ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 2 Index 1"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST; - if(temp>=0){ - current_intvl->AturChanPerfUncorrBlk+=temp; - ATUR_CHAN_UNCORR_BLK+=temp; - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4]; - } - else{ - current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4]; - ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4]; - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4]; - } - } - } - - //RFC-3440 - -#ifdef AMAZON_MEI_MIB_RFC3440 - if(showtime!=1) - goto mib_poll_end; - ATUC_PERF_STAT_FASTR_FLAG_MAKECMV; //??? - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 0 Address 0 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FASTR; - if(temp>=0){ - current_intvl->AtucPerfStatFastR+=temp; - ATUC_PERF_STAT_FASTR+=temp; - mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4]; - ATUC_PERF_STAT_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4]; - mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4]; - } - } - if(showtime!=1) - goto mib_poll_end; - ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV; //??? - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 0 Address 0 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FAILED_FASTR; - if(temp>=0){ - current_intvl->AtucPerfStatFailedFastR+=temp; - ATUC_PERF_STAT_FAILED_FASTR+=temp; - mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatFailedFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4]; - ATUC_PERF_STAT_FAILED_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4]; - mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4]; - } - } - if(showtime!=1) - goto mib_poll_end; - ATUC_PERF_STAT_SESL_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 8 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_SESL; - if(temp>=0){ - current_intvl->AtucPerfStatSesL+=temp; - ATUC_PERF_STAT_SESL+=temp; - mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatSesL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4]; - ATUC_PERF_STAT_SESL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4]; - mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4]; - } - } - if(showtime!=1) - goto mib_poll_end; - ATUC_PERF_STAT_UASL_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 10 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_UASL; - if(temp>=0){ - current_intvl->AtucPerfStatUasL+=temp; - ATUC_PERF_STAT_UASL+=temp; - mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4]; - ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4]; - mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4]; - } - } - if(showtime!=1) - goto mib_poll_end; - ATUR_PERF_STAT_SESL_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 34 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_PERF_STAT_SESL; - if(temp>=0){ - current_intvl->AtucPerfStatUasL+=temp; - ATUC_PERF_STAT_UASL+=temp; - mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4]; - ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4]; - mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4]; - } - } - -#endif -mib_poll_end: - up(&mei_sema); - - do_gettimeofday(&time_fini); - i = ((int)((time_fini.tv_sec-time_now.tv_sec)*1000)) + ((int)((time_fini.tv_usec-time_now.tv_usec)/1000)) ; //msec - }//showtime==1 - } - -} -int mib_poll_init(void) -{ - printk("Starting mib_poll...\n"); - - kernel_thread(adsl_mib_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL); - return 0; -} -#endif //IFX_SMALL_FOOTPRINT -//EXPORT_NO_SYMBOLS; - -#ifdef ADSL_LED_SUPPORT -// adsl led -start -int led_status_on=0,led_need_to_flash=0; -int led_current_flashing=0; -unsigned long led_delay=0; -static int led_poll(void *unused) -{ - stop_led_module=0; //begin polling ... - while(!stop_led_module){ - if ((!led_status_on)&&(!led_need_to_flash)) interruptible_sleep_on_timeout (&wait_queue_led_polling,1000); //10 seconds timeout for waiting wakeup -// else printk("direct running task, no waiting"); - run_task_queue(&tq_ifx_led);//joelin task -// printk("led and LOP polling...\n"); - } - return 0; -} -static int led_poll_init(void) -{ -// printk("Starting adsl led polling...\n"); - -//warning-led-start -// CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON -//warning-led-end - - kernel_thread(led_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL); - return 0; -} - -int adsl_led_flash(void) -{ - int i; - if (!firmware_support_led) return 0; //joelin version check - - if (led_status_on == 0 && led_need_to_flash == 0) - { - queue_task(&led_task, &tq_ifx_led);//joelin task - wake_up_interruptible(&wait_queue_led_polling); //wake up and clean led module -// printk("queue Task 1...\n"); //joelin test - } - led_need_to_flash=1;//asking to flash led - - return 0; -} - -int adsl_led_flash_task(void *ptr) -{ - - u16 one=1; - u16 zero=0; - u16 data=0x0600; - int kernel_use=1; - u16 CMVMSG[MSG_LENGTH]; -//adsl-led-start for >v1.1.2.7.1.1 -// printk("Task Running...\n"); //joelin test - if ((firmware_support_led==2)&&(led_support_check)) - { - led_support_check=0; - data=0x0600; - makeCMV_local(H2D_CMV_WRITE, INFO, 91, 0, 1, &data,CMVMSG); //configure GPIO9 GPIO10 as outputs - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - - makeCMV_local(H2D_CMV_WRITE, INFO, 91, 2, 1, &data,CMVMSG); //enable writing to bit 9 and bit10 - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - - data=0x0a01; - makeCMV_local(H2D_CMV_WRITE, INFO, 91, 4, 1, &data,CMVMSG); //use GPIO10 for TR68 .Enable and don't invert. - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - -#ifdef DATA_LED_ON_MODE - data=0x0903;//tecom //use GPIO9 for TR68 data led .turn on. -#else - data=0x0900; -#endif - makeCMV_local(H2D_CMV_WRITE, INFO, 91, 5, 1, &data,CMVMSG); //use GPIO9 for TR68 data led .turn off. - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - - } - if (!showtime) {led_need_to_flash=0; return 0;} -//adsl-led-end for >v1.1.2.7.1.1 - - if (led_status_on == 0 || led_need_to_flash == 1) - { - - if (led_current_flashing==0) - { - if (firmware_support_led==1){//>1.1.2.3.1.1 - makeCMV_local(H2D_CMV_WRITE, INFO, 91, 0, 1, &one,CMVMSG); //flash - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG); - } - else if (firmware_support_led==2){//>1.1.2.7.1.1 - data=0x0901;//flash - makeCMV_local(H2D_CMV_WRITE, INFO, 91, 5, 1, &data,CMVMSG); //use GPIO9 for TR68 data led .flash. - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG); - - }//(firmware_support_led==2) - led_current_flashing = 1;//turn on led - } - led_status_on=1; - - do{//do nothing , waiting untill no data traffic - led_need_to_flash=0; - interruptible_sleep_on_timeout(&wait_queue_led, 25); //the time for LED Off , if no data traffic - }while(led_need_to_flash==1); - - }else if (led_status_on == 1 && led_need_to_flash==0) - { - if (led_current_flashing==1) - {//turn off led - if (firmware_support_led==1){//>1.1.2.3.1.1 - makeCMV_local(H2D_CMV_WRITE, INFO, 91, 0, 1, &zero,CMVMSG);//off - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG); - } //>1.1.2.3.1.1 - else if (firmware_support_led==2){//>1.1.2.7.1.1 -#ifdef DATA_LED_ON_MODE - data=0x0903;//tecom //use GPIO9 for TR68 data led .turn on. -#else - data=0x0900;//off -#endif - makeCMV_local(H2D_CMV_WRITE, INFO, 91, 5, 1, &data,CMVMSG); //use GPIO9 for TR68 data led .off. - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG); - - }//(firmware_support_led==2) - led_status_on=0; - led_current_flashing = 0; - } - } - - if (led_status_on == 1 || led_need_to_flash) - {//led flash job on going or led need to flash - queue_task(&led_task, &tq_ifx_led); //joelin task -// printk("queue Task 2...\n"); //joelin test - } - return 0; -} -//joelin adsl led-end -#else -int adsl_led_flash(void) -{ - return 0; -} -#endif //ADSL_LED_SUPPORT -#ifdef IFX_DYING_GASP -static int lop_poll(void *unused) -{ - - while(1) - { - interruptible_sleep_on_timeout(&wait_queue_dying_gasp, 1); -#ifdef CONFIG_CPU_AMAZON_E //000003:fchang - if(showtime&&((*((volatile u32 *)0xB0100B14))&0x4)==0x0) {//000003:fchang -#else //000003:fchang - if(showtime&&((*((volatile u32 *)0xB0100B44))&0x8000)==0x0) { -#endif //CONFIG_CPU_AMAZON_E - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_WRITEDEBUG, &lop_debugwr); - printk("send dying gasp..\n");} - - } - return 0; - } -static int lop_poll_init(void) -{ -// printk("Starting LOP polling...\n"); - kernel_thread(lop_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL); - return 0; -} - -#endif //IFX_DYING_GASP - -//joelin 04/16/2005-satrt -static int unavailable_seconds_poll(void *unused) -{ - while(1){ - interruptible_sleep_on_timeout (&wait_queue_uas_poll,100); //1 second timeout for waiting wakeup - if (!showtime) unavailable_seconds++; - } - return 0; -} -static int unavailable_seconds_poll_init(void) -{ - - kernel_thread(unavailable_seconds_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL); - return 0; -} - - -//joelin 04/16/2005-end -EXPORT_SYMBOL(meiDebugWrite); -EXPORT_SYMBOL(ifx_pop_eoc); - -MODULE_LICENSE("GPL"); - -module_init(amazon_mei_init_module); -module_exit(amazon_mei_cleanup_module); - diff --git a/target/linux/amazon/files/drivers/char/ifx_ssc.c b/target/linux/amazon/files/drivers/char/ifx_ssc.c deleted file mode 100644 index ea01659a94..0000000000 --- a/target/linux/amazon/files/drivers/char/ifx_ssc.c +++ /dev/null @@ -1,2121 +0,0 @@ -/************************************************** - * - * drivers/ifx/serial/ifx_ssc.c - * - * Driver for IFX_SSC serial ports - * - * Copyright (C) 2004 Infineon Technologies AG - * Author Michael Schoenenborn (IFX COM TI BT) - * - */ -#define IFX_SSC_DRV_VERSION "0.2.1" -/* - ************************************************** - * - * This driver was originally based on the INCA-IP driver, but due to - * fundamental conceptual drawbacks there has been changed a lot. - * - * Based on INCA-IP driver Copyright (c) 2003 Gary Jennejohn <gj@denx.de> - * Based on the VxWorks drivers Copyright (c) 2002, Infineon Technologies. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -// ### TO DO: general issues: -// - power management -// - interrupt handling (direct/indirect) -// - pin/mux-handling (just overall concept due to project dependency) -// - multiple instances capability -// - slave functionality - -/* - * Include section - */ -#ifndef EXPORT_SYMTAB -#define EXPORT_SYMTAB -#endif - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fs.h> -#include <linux/proc_fs.h> -#include <linux/fcntl.h> -#include <linux/ptrace.h> -#include <linux/mm.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/spinlock.h> -#include <linux/slab.h> -//#include <linux/poll.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/bitops.h> - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/version.h> - -#include <asm/amazon/amazon.h> -#include <asm/amazon/irq.h> -#include <asm/amazon/ifx_ssc_defines.h> -#include <asm/amazon/ifx_ssc.h> - -#ifdef SSC_FRAME_INT_ENABLE -#undef SSC_FRAME_INT_ENABLE -#endif - -#define not_yet - -#define SPI_VINETIC - -/* - * Deal with CONFIG_MODVERSIONS - */ -#if CONFIG_MODVERSIONS==1 -# include <linux/modversions.h> -#endif - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Michael Schoenenborn"); -MODULE_DESCRIPTION("IFX SSC driver"); -MODULE_SUPPORTED_DEVICE("ifx_ssc"); -MODULE_PARM(maj, "i"); -MODULE_PARM_DESC(maj, "Major device number"); - -/* allow the user to set the major device number */ -static int maj = 0; - - -/* - * This is the per-channel data structure containing pointers, flags - * and variables for the port. This driver supports a maximum of PORT_CNT. - * isp is allocated in ifx_ssc_init() based on the chip version. - */ -static struct ifx_ssc_port *isp; - -/* prototypes for fops */ -static ssize_t ifx_ssc_read(struct file *, char *, size_t, loff_t *); -static ssize_t ifx_ssc_write(struct file *, const char *, size_t, loff_t *); -//static unsigned int ifx_ssc_poll(struct file *, struct poll_table_struct *); -int ifx_ssc_ioctl(struct inode *, struct file *, unsigned int, unsigned long); -int ifx_ssc_open(struct inode *, struct file *); -int ifx_ssc_close(struct inode *, struct file *); - -/* other forward declarations */ -static unsigned int ifx_ssc_get_kernel_clk(struct ifx_ssc_port *info); -static void ifx_ssc_rx_int(int, void *, struct pt_regs *); -static void ifx_ssc_tx_int(int, void *, struct pt_regs *); -static void ifx_ssc_err_int(int, void *, struct pt_regs *); -#ifdef SSC_FRAME_INT_ENABLE -static void ifx_ssc_frm_int(int, void *, struct pt_regs *); -#endif -static void tx_int(struct ifx_ssc_port *); -static int ifx_ssc1_read_proc(char *, char **, off_t, int, int *, void *); -static void ifx_gpio_init(void); -/************************************************************************ - * Function declaration - ************************************************************************/ -//interrupt.c -extern unsigned int amazon_get_fpi_hz(void); -extern void disable_amazon_irq(unsigned int irq_nr); -extern void enable_amazon_irq(unsigned int irq_nr); -extern void mask_and_ack_amazon_irq(unsigned int irq_nr); - - -/*****************************************************************/ -typedef struct { - int (*request)(unsigned int irq, - void (*handler)(int, void *, struct pt_regs *), - unsigned long irqflags, - const char * devname, - void *dev_id); - void (*free)(unsigned int irq, void *dev_id); - void (*enable)(unsigned int irq); - void (*disable)(unsigned int irq); - void (*clear)(unsigned int irq); -} ifx_int_wrapper_t; - -static ifx_int_wrapper_t ifx_int_wrapper = { - request: request_irq, // IM action: enable int - free: free_irq, // IM action: disable int - enable: enable_amazon_irq, - disable: disable_amazon_irq, - clear: mask_and_ack_amazon_irq, - //end: -}; - -/* Fops-struct */ -static struct file_operations ifx_ssc_fops = { - owner: THIS_MODULE, - read: ifx_ssc_read, /* read */ - write: ifx_ssc_write, /* write */ -// poll: ifx_ssc_poll, /* poll */ - ioctl: ifx_ssc_ioctl, /* ioctl */ - open: ifx_ssc_open, /* open */ - release: ifx_ssc_close, /* release */ -}; - - -static inline unsigned int ifx_ssc_get_kernel_clk(struct ifx_ssc_port *info) -{ // ATTENTION: This function assumes that the CLC register is set with the - // appropriate value for RMC. - unsigned int rmc; - - rmc = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_CLC) & - IFX_CLC_RUN_DIVIDER_MASK) >> IFX_CLC_RUN_DIVIDER_OFFSET; - if (rmc == 0){ - printk("ifx_ssc_get_kernel_clk rmc==0 \n"); - return (0); - } - return (amazon_get_fpi_hz() / rmc); -} - -#ifndef not_yet -#ifdef IFX_SSC_INT_USE_BH -/* - * This routine is used by the interrupt handler to schedule - * processing in the software interrupt portion of the driver - * (also known as the "bottom half"). This can be called any - * number of times for any channel without harm. - */ -static inline void -ifx_ssc_sched_event(struct ifx_ssc_port *info, int event) -{ - info->event |= 1 << event; /* remember what kind of event and who */ - queue_task(&info->tqueue, &tq_cyclades); /* it belongs to */ - mark_bh(CYCLADES_BH); /* then trigger event */ -} /* ifx_ssc_sched_event */ - - -/* - * This routine is used to handle the "bottom half" processing for the - * serial driver, known also the "software interrupt" processing. - * This processing is done at the kernel interrupt level, after the - * cy#/_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This - * is where time-consuming activities which can not be done in the - * interrupt driver proper are done; the interrupt driver schedules - * them using ifx_ssc_sched_event(), and they get done here. - * - * This is done through one level of indirection--the task queue. - * When a hardware interrupt service routine wants service by the - * driver's bottom half, it enqueues the appropriate tq_struct (one - * per port) to the tq_cyclades work queue and sets a request flag - * via mark_bh for processing that queue. When the time is right, - * do_ifx_ssc_bh is called (because of the mark_bh) and it requests - * that the work queue be processed. - * - * Although this may seem unwieldy, it gives the system a way to - * pass an argument (in this case the pointer to the ifx_ssc_port - * structure) to the bottom half of the driver. Previous kernels - * had to poll every port to see if that port needed servicing. - */ -static void -do_ifx_ssc_bh(void) -{ - run_task_queue(&tq_cyclades); -} /* do_ifx_ssc_bh */ - -static void -do_softint(void *private_) -{ - struct ifx_ssc_port *info = (struct ifx_ssc_port *) private_; - - if (test_and_clear_bit(Cy_EVENT_HANGUP, &info->event)) { - wake_up_interruptible(&info->open_wait); - info->flags &= ~(ASYNC_NORMAL_ACTIVE| - ASYNC_CALLOUT_ACTIVE); - } - if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) { - wake_up_interruptible(&info->open_wait); - } - if (test_and_clear_bit(Cy_EVENT_DELTA_WAKEUP, &info->event)) { - wake_up_interruptible(&info->delta_msr_wait); - } - if (test_and_clear_bit(Cy_EVENT_WRITE_WAKEUP, &info->event)) { - wake_up_interruptible(&tty->write_wait); - } -#ifdef Z_WAKE - if (test_and_clear_bit(Cy_EVENT_SHUTDOWN_WAKEUP, &info->event)) { - wake_up_interruptible(&info->shutdown_wait); - } -#endif -} /* do_softint */ -#endif /* IFX_SSC_INT_USE_BH */ -#endif // not_yet - -inline static void -rx_int(struct ifx_ssc_port *info) -{ - int fifo_fill_lev, bytes_in_buf, i; - unsigned long tmp_val; - unsigned long *tmp_ptr; - unsigned int rx_valid_cnt; - /* number of words waiting in the RX FIFO */ - fifo_fill_lev = (READ_PERIPHERAL_REGISTER(info->mapbase + - IFX_SSC_FSTAT) & - IFX_SSC_FSTAT_RECEIVED_WORDS_MASK) >> - IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET; - // Note: There are always 32 bits in a fifo-entry except for the last - // word of a contigous transfer block and except for not in rx-only - // mode and CON.ENBV set. But for this case it should be a convention - // in software which helps: - // In tx or rx/tx mode all transfers from the buffer to the FIFO are - // 32-bit wide, except for the last three bytes, which could be a - // combination of 16- and 8-bit access. - // => The whole block is received as 32-bit words as a contigous stream, - // even if there was a gap in tx which has the fifo run out of data! - // Just the last fifo entry *may* be partially filled (0, 1, 2 or 3 bytes)! - - /* free space in the RX buffer */ - bytes_in_buf = info->rxbuf_end - info->rxbuf_ptr; - // transfer with 32 bits per entry - while ((bytes_in_buf >= 4) && (fifo_fill_lev > 0)) { - tmp_ptr = (unsigned long *)info->rxbuf_ptr; - *tmp_ptr = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RB); - info->rxbuf_ptr += 4; - info->stats.rxBytes += 4; - fifo_fill_lev --; - bytes_in_buf -= 4; - } // while ((bytes_in_buf >= 4) && (fifo_fill_lev > 0)) - // now do the rest as mentioned in STATE.RXBV - while ((bytes_in_buf > 0) && (fifo_fill_lev > 0)) { - rx_valid_cnt = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) & - IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> - IFX_SSC_STATE_RX_BYTE_VALID_OFFSET; - if (rx_valid_cnt == 0) break; - if (rx_valid_cnt > bytes_in_buf) { - // ### TO DO: warning message: not block aligned data, other data - // in this entry will be lost - rx_valid_cnt = bytes_in_buf; - } - tmp_val = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RB); - - for (i=0; i<rx_valid_cnt; i++) { - *info->rxbuf_ptr = (tmp_val >> ( 8 * (rx_valid_cnt - i-1))) & 0xff; -/* - *info->rxbuf_ptr = tmp_val & 0xff; - tmp_val >>= 8; -*/ - bytes_in_buf--; - - - info->rxbuf_ptr++; - } - info->stats.rxBytes += rx_valid_cnt; - } // while ((bytes_in_buf > 0) && (fifo_fill_lev > 0)) - - // check if transfer is complete - if (info->rxbuf_ptr >= info->rxbuf_end) { - ifx_int_wrapper.disable(info->rxirq); - /* wakeup any processes waiting in read() */ - wake_up_interruptible(&info->rwait); - /* and in poll() */ - //wake_up_interruptible(&info->pwait); - } else if ((info->opts.modeRxTx == IFX_SSC_MODE_RX) && - (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) == 0)) { - // if buffer not filled completely and rx request done initiate new transfer -/* - if (info->rxbuf_end - info->rxbuf_ptr < 65536) -*/ - if (info->rxbuf_end - info->rxbuf_ptr < IFX_SSC_RXREQ_BLOCK_SIZE) - WRITE_PERIPHERAL_REGISTER((info->rxbuf_end - info->rxbuf_ptr) << - IFX_SSC_RXREQ_RXCOUNT_OFFSET, - info->mapbase + IFX_SSC_RXREQ); - else - WRITE_PERIPHERAL_REGISTER(IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET, - info->mapbase + IFX_SSC_RXREQ); - } -} // rx_int - -inline static void -tx_int(struct ifx_ssc_port *info) -{ - - int fifo_space, fill, i; - fifo_space = ((READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_ID) & - IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET) - - ((READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_FSTAT) & - IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK) >> - IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET); - - if (fifo_space == 0) - return; - - fill = info->txbuf_end - info->txbuf_ptr; - - if (fill > fifo_space * 4) - fill = fifo_space * 4; - - for (i = 0; i < fill / 4; i++) { - // at first 32 bit access - WRITE_PERIPHERAL_REGISTER(*(UINT32 *)info->txbuf_ptr, info->mapbase + IFX_SSC_TB); - info->txbuf_ptr += 4; - } - - fifo_space -= fill / 4; - info->stats.txBytes += fill & ~0x3; - fill &= 0x3; - if ((fifo_space > 0) & (fill > 1)) { - // trailing 16 bit access - WRITE_PERIPHERAL_REGISTER_16(*(UINT16 *)info->txbuf_ptr, info->mapbase + IFX_SSC_TB); - info->txbuf_ptr += 2; - info->stats.txBytes += 2; - fifo_space --; -/* added by bingtao */ - fill -=2; - } - if ((fifo_space > 0) & (fill > 0)) { - // trailing 8 bit access - WRITE_PERIPHERAL_REGISTER_8(*(UINT8 *)info->txbuf_ptr, info->mapbase + IFX_SSC_TB); - info->txbuf_ptr ++; - info->stats.txBytes ++; -/* - fifo_space --; -*/ - } - - // check if transmission complete - if (info->txbuf_ptr >= info->txbuf_end) { - ifx_int_wrapper.disable(info->txirq); - kfree(info->txbuf); - info->txbuf = NULL; - /* wake up any process waiting in poll() */ - //wake_up_interruptible(&info->pwait); - } - -} // tx_int - -static void -ifx_ssc_rx_int(int irq, void *dev_id, struct pt_regs *regs) -{ - struct ifx_ssc_port *info = (struct ifx_ssc_port *)dev_id; - //WRITE_PERIPHERAL_REGISTER(IFX_SSC_R_BIT, info->mapbase + IFX_SSC_IRN_CR); - rx_int(info); -} - -static void -ifx_ssc_tx_int(int irq, void *dev_id, struct pt_regs *regs) -{ - struct ifx_ssc_port *info = (struct ifx_ssc_port *)dev_id; - //WRITE_PERIPHERAL_REGISTER(IFX_SSC_T_BIT, info->mapbase + IFX_SSC_IRN_CR); - tx_int(info); -} - -static void -ifx_ssc_err_int(int irq, void *dev_id, struct pt_regs *regs) -{ - struct ifx_ssc_port *info = (struct ifx_ssc_port *)dev_id; - unsigned int state; - unsigned int write_back = 0; - unsigned long flags; - - - local_irq_save(flags); - state = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE); - - if ((state & IFX_SSC_STATE_RX_UFL) != 0) { - info->stats.rxUnErr++; - write_back |= IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR; - } - if ((state & IFX_SSC_STATE_RX_OFL) != 0) { - info->stats.rxOvErr++; - write_back |= IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR; - } - if ((state & IFX_SSC_STATE_TX_OFL) != 0) { - info->stats.txOvErr++; - write_back |= IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR; - } - if ((state & IFX_SSC_STATE_TX_UFL) != 0) { - info->stats.txUnErr++; - write_back |= IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR; - } -// if ((state & IFX_SSC_STATE_ABORT_ERR) != 0) { -// info->stats.abortErr++; -// write_back |= IFX_SSC_WHBSTATE_CLR_ABORT_ERROR; -// } - if ((state & IFX_SSC_STATE_MODE_ERR) != 0) { - info->stats.modeErr++; - write_back |= IFX_SSC_WHBSTATE_CLR_MODE_ERROR; - } - - if (write_back) - WRITE_PERIPHERAL_REGISTER(write_back, - info->mapbase + IFX_SSC_WHBSTATE); - - local_irq_restore(flags); -} - -#ifdef SSC_FRAME_INT_ENABLE -static void -ifx_ssc_frm_int(int irq, void *dev_id, struct pt_regs *regs) -{ - // ### TO DO: wake up framing wait-queue in conjunction with batch execution -} -#endif - -static void -ifx_ssc_abort(struct ifx_ssc_port *info) -{ - unsigned long flags; - bool enabled; - - local_irq_save(flags); - - // disable all int's - ifx_int_wrapper.disable(info->rxirq); - ifx_int_wrapper.disable(info->txirq); - ifx_int_wrapper.disable(info->errirq); -/* - ifx_int_wrapper.disable(info->frmirq); -*/ - local_irq_restore(flags); - - // disable SSC (also aborts a receive request!) - // ### TO DO: Perhaps it's better to abort after the receiption of a - // complete word. The disable cuts the transmission immediatly and - // releases the chip selects. This could result in unpredictable - // behavior of connected external devices! - enabled = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) - & IFX_SSC_STATE_IS_ENABLED) != 0; - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE, - info->mapbase + IFX_SSC_WHBSTATE); - - - // flush fifos - WRITE_PERIPHERAL_REGISTER(IFX_SSC_XFCON_FIFO_FLUSH, - info->mapbase + IFX_SSC_TXFCON); - WRITE_PERIPHERAL_REGISTER(IFX_SSC_XFCON_FIFO_FLUSH, - info->mapbase + IFX_SSC_RXFCON); - - // free txbuf - if (info->txbuf != NULL) { - kfree(info->txbuf); - info->txbuf = NULL; - } - - // wakeup read process - if (info->rxbuf != NULL) - wake_up_interruptible(&info->rwait); - - // clear pending int's - ifx_int_wrapper.clear(info->rxirq); - ifx_int_wrapper.clear(info->txirq); - ifx_int_wrapper.clear(info->errirq); -/* - ifx_int_wrapper.clear(info->frmirq); -*/ - - // clear error flags - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ALL_ERROR, - info->mapbase + IFX_SSC_WHBSTATE); - - //printk("IFX SSC%d: Transmission aborted\n", info->port_nr); - // enable SSC - if (enabled) - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE, - info->mapbase + IFX_SSC_WHBSTATE); - -} // ifx_ssc_abort - - -/* - * This routine is called whenever a port is opened. It enforces - * exclusive opening of a port and enables interrupts, etc. - */ -int -ifx_ssc_open(struct inode *inode, struct file * filp) -{ - struct ifx_ssc_port *info; - int line; - int from_kernel = 0; - - if ((inode == (struct inode *)0) || (inode == (struct inode *)1)) { - from_kernel = 1; - line = (int)inode; - } - else { - line = MINOR(filp->f_dentry->d_inode->i_rdev); - filp->f_op = &ifx_ssc_fops; - } - - /* don't open more minor devices than we can support */ - if (line < 0 || line >= PORT_CNT) - return -ENXIO; - - info = &isp[line]; - - /* exclusive open */ - if (info->port_is_open != 0) - return -EBUSY; - info->port_is_open++; - - ifx_int_wrapper.disable(info->rxirq); - ifx_int_wrapper.disable(info->txirq); - ifx_int_wrapper.disable(info->errirq); -/* - ifx_int_wrapper.disable(info->frmirq); -*/ - - /* Flush and enable TX/RX FIFO */ - WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_TXFIFO_FL << - IFX_SSC_XFCON_ITL_OFFSET) | - IFX_SSC_XFCON_FIFO_FLUSH | - IFX_SSC_XFCON_FIFO_ENABLE, - info->mapbase + IFX_SSC_TXFCON); - WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_RXFIFO_FL << - IFX_SSC_XFCON_ITL_OFFSET) | - IFX_SSC_XFCON_FIFO_FLUSH | - IFX_SSC_XFCON_FIFO_ENABLE, - info->mapbase + IFX_SSC_RXFCON); - - - /* logically flush the software FIFOs */ - info->rxbuf_ptr = 0; - info->txbuf_ptr = 0; - - /* clear all error bits */ - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ALL_ERROR, - info->mapbase + IFX_SSC_WHBSTATE); - - // clear pending interrupts - ifx_int_wrapper.clear(info->rxirq); - ifx_int_wrapper.clear(info->txirq); - ifx_int_wrapper.clear(info->errirq); -/* - ifx_int_wrapper.clear(info->frmirq); -*/ - - // enable SSC - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE, - info->mapbase + IFX_SSC_WHBSTATE); - - MOD_INC_USE_COUNT; - - return 0; -} /* ifx_ssc_open */ -EXPORT_SYMBOL(ifx_ssc_open); - -/* - * This routine is called when a particular device is closed. - */ -int -ifx_ssc_close(struct inode *inode, struct file *filp) -{ - struct ifx_ssc_port *info; - int idx; - - if ((inode == (struct inode *)0) || (inode == (struct inode *)1)) - idx = (int)inode; - else - idx = MINOR(filp->f_dentry->d_inode->i_rdev); - - if (idx < 0 || idx >= PORT_CNT) - return -ENXIO; - - info = &isp[idx]; - if (!info) - return -ENXIO; - - // disable SSC - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE, - info->mapbase + IFX_SSC_WHBSTATE); - - // call abort function to disable int's, flush fifos... - ifx_ssc_abort(info); - - info->port_is_open --; - MOD_DEC_USE_COUNT; - - return 0; -} /* ifx_ssc_close */ -EXPORT_SYMBOL(ifx_ssc_close); - -/* added by bingtao */ -/* helper routine to handle reads from the kernel or user-space */ -/* info->rxbuf : never kfree and contains valid data */ -/* should be points to NULL after copying data !!! */ -static ssize_t -ifx_ssc_read_helper_poll(struct ifx_ssc_port *info, char *buf, size_t len, - int from_kernel) -{ - ssize_t ret_val; - unsigned long flags; - - if (info->opts.modeRxTx == IFX_SSC_MODE_TX) - return -EFAULT; - local_irq_save(flags); - info->rxbuf_ptr = info->rxbuf; - info->rxbuf_end = info->rxbuf + len; - local_irq_restore(flags); -/* Vinetic driver always works in IFX_SSC_MODE_RXTX */ -/* TXRX in poll mode */ - while (info->rxbuf_ptr < info->rxbuf_end){ -/* This is the key point, if you don't check this condition - kfree (NULL) will happen - because tx only need write into FIFO, it's much fast than rx - So when rx still waiting , tx already finish and release buf -*/ - if (info->txbuf_ptr < info->txbuf_end) { - tx_int(info); - } - - rx_int(info); - }; - - ret_val = info->rxbuf_ptr - info->rxbuf; - return (ret_val); -} // ifx_ssc_read_helper_poll - -/* helper routine to handle reads from the kernel or user-space */ -/* info->rx_buf : never kfree and contains valid data */ -/* should be points to NULL after copying data !!! */ -static ssize_t -ifx_ssc_read_helper(struct ifx_ssc_port *info, char *buf, size_t len, - int from_kernel) -{ - ssize_t ret_val; - unsigned long flags; - DECLARE_WAITQUEUE(wait, current); - - if (info->opts.modeRxTx == IFX_SSC_MODE_TX) - return -EFAULT; - local_irq_save(flags); - info->rxbuf_ptr = info->rxbuf; - info->rxbuf_end = info->rxbuf + len; - if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX) { - if ((info->txbuf == NULL) || - (info->txbuf != info->txbuf_ptr) || - (info->txbuf_end != len + info->txbuf)) { - local_irq_restore(flags); - printk("IFX SSC - %s: write must be called before calling " - "read in combined RX/TX!\n", __FUNCTION__); - return -EFAULT; - } - local_irq_restore(flags); - /* should enable tx, right?*/ - tx_int(info); - if (info->txbuf_ptr < info->txbuf_end){ - ifx_int_wrapper.enable(info->txirq); - } - - ifx_int_wrapper.enable(info->rxirq); - } else { // rx mode - local_irq_restore(flags); - if (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) & - IFX_SSC_RXCNT_TODO_MASK) - return -EBUSY; - ifx_int_wrapper.enable(info->rxirq); - // rx request limited to ' bytes -/* - if (len < 65536) -*/ - if (len < IFX_SSC_RXREQ_BLOCK_SIZE) - WRITE_PERIPHERAL_REGISTER(len << IFX_SSC_RXREQ_RXCOUNT_OFFSET, - info->mapbase + IFX_SSC_RXREQ); - else - WRITE_PERIPHERAL_REGISTER(IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET, - info->mapbase + IFX_SSC_RXREQ); - } - - __add_wait_queue(&info->rwait, &wait); - set_current_state(TASK_INTERRUPTIBLE); - // wakeup done in rx_int - - do { - local_irq_save(flags); - if (info->rxbuf_ptr >= info->rxbuf_end) - break; - local_irq_restore(flags); - -// if (filp->f_flags & O_NONBLOCK) -// { -// N = -EAGAIN; -// goto out; -// } - if (signal_pending(current)) { - ret_val = -ERESTARTSYS; - goto out; - } - schedule(); - } while (1); - - ret_val = info->rxbuf_ptr - info->rxbuf; // should be equal to len - local_irq_restore(flags); - - out: - current->state = TASK_RUNNING; - __remove_wait_queue(&info->rwait, &wait); - return (ret_val); -} // ifx_ssc_read_helper - - -#if 0 -/* helper routine to handle reads from the kernel or user-space */ -/* appropriate in interrupt context */ -static ssize_t -ifx_ssc_read_helper(struct ifx_ssc_port *info, char *buf, size_t len, - int from_kernel) -{ - ssize_t ret_val; - unsigned long flags; - DECLARE_WAITQUEUE(wait, current); - - if (info->opts.modeRxTx == IFX_SSC_MODE_TX) - return -EFAULT; - local_irq_save(flags); - info->rxbuf_ptr = info->rxbuf; - info->rxbuf_end = info->rxbuf + len; - if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX) { - if ((info->txbuf == NULL) || - (info->txbuf != info->txbuf_ptr) || - (info->txbuf_end != len + info->txbuf)) { - local_irq_restore(flags); - printk("IFX SSC - %s: write must be called before calling " - "read in combined RX/TX!\n", __FUNCTION__); - return -EFAULT; - } - local_irq_restore(flags); - /* should enable tx, right?*/ - tx_int(info); - if (!in_irq()){ - if (info->txbuf_ptr < info->txbuf_end){ - ifx_int_wrapper.enable(info->txirq); - } - ifx_int_wrapper.enable(info->rxirq); - } - } else { // rx mode - local_irq_restore(flags); - if (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) & - IFX_SSC_RXCNT_TODO_MASK) - return -EBUSY; - if (!in_irq()){ - ifx_int_wrapper.enable(info->rxirq); - } - - if (len < IFX_SSC_RXREQ_BLOCK_SIZE) - WRITE_PERIPHERAL_REGISTER(len << IFX_SSC_RXREQ_RXCOUNT_OFFSET, - info->mapbase + IFX_SSC_RXREQ); - else - WRITE_PERIPHERAL_REGISTER(IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET, - info->mapbase + IFX_SSC_RXREQ); - } - if (in_irq()){ - do { - rx_int(info); - if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX) { - tx_int(info); - } - - if (info->rxbuf_ptr >= info->rxbuf_end) - break; - } while (1); - ret_val = info->rxbuf_ptr - info->rxbuf; - }else{ - __add_wait_queue(&info->rwait, &wait); - set_current_state(TASK_INTERRUPTIBLE); - // wakeup done in rx_int - - do { - local_irq_save(flags); - if (info->rxbuf_ptr >= info->rxbuf_end) - break; - local_irq_restore(flags); - - if (signal_pending(current)) { - ret_val = -ERESTARTSYS; - goto out; - } - schedule(); - } while (1); - - ret_val = info->rxbuf_ptr - info->rxbuf; // should be equal to len - local_irq_restore(flags); - - out: - current->state = TASK_RUNNING; - __remove_wait_queue(&info->rwait, &wait); - } - return (ret_val); -} // ifx_ssc_read_helper -#endif - -/* helper routine to handle writes to the kernel or user-space */ -/* info->txbuf has two cases: - * 1) return value < 0 (-EFAULT), not touched at all - * 2) kfree and points to NULL in interrupt routine (but maybe later ) - */ -static ssize_t -ifx_ssc_write_helper(struct ifx_ssc_port *info, const char *buf, - size_t len, int from_kernel) -{ - // check if in tx or tx/rx mode - if (info->opts.modeRxTx == IFX_SSC_MODE_RX) - return -EFAULT; - - info->txbuf_ptr = info->txbuf; - info->txbuf_end = len + info->txbuf; - /* start the transmission (not in rx/tx, see read helper) */ - if (info->opts.modeRxTx == IFX_SSC_MODE_TX) { - tx_int(info); - if (info->txbuf_ptr < info->txbuf_end){ - ifx_int_wrapper.enable(info->txirq); - } - } - //local_irq_restore(flags); - return len; -} - -/* - * kernel interfaces for read and write. - * The caller must set port to: n for SSC<m> with n=m-1 (e.g. n=0 for SSC1) - */ -ssize_t -ifx_ssc_kread(int port, char *kbuf, size_t len) -{ - struct ifx_ssc_port *info; - ssize_t ret_val; - - if (port < 0 || port >= PORT_CNT) - return -ENXIO; - - if (len == 0) - return 0; - - info = &isp[port]; - - // check if reception in progress - if (info->rxbuf != NULL){ - printk("SSC device busy\n"); - return -EBUSY; - } - - info->rxbuf = kbuf; - if (info->rxbuf == NULL){ - printk("SSC device error\n"); - return -EINVAL; - } - -/* changed by bingtao */ - /* change by TaiCheng */ - //if (!in_irq()){ - if (0){ - ret_val = ifx_ssc_read_helper(info, kbuf, len, 1); - }else{ - ret_val = ifx_ssc_read_helper_poll(info, kbuf, len, 1); - }; - info->rxbuf = NULL; - - // ### TO DO: perhaps warn if ret_val != len - ifx_int_wrapper.disable(info->rxirq); - - return (ret_val); -} // ifx_ssc_kread -EXPORT_SYMBOL(ifx_ssc_kread); - -ssize_t -ifx_ssc_kwrite(int port, const char *kbuf, size_t len) -{ - struct ifx_ssc_port *info; - ssize_t ret_val; - - if (port < 0 || port >= PORT_CNT) - return -ENXIO; - - if (len == 0) - return 0; - - info = &isp[port]; - - // check if transmission in progress - if (info->txbuf != NULL) - return -EBUSY; - info->txbuf = (char *)kbuf; - - ret_val = ifx_ssc_write_helper(info, info->txbuf, len, 1); - if (ret_val < 0){ - info->txbuf = NULL; - } - return ret_val; -} -EXPORT_SYMBOL(ifx_ssc_kwrite); - - -/* - * user interfaces to read and write - */ -static ssize_t -ifx_ssc_read(struct file *filp, char *ubuf, size_t len, loff_t *off) -{ - ssize_t ret_val; - int idx; - struct ifx_ssc_port *info; - -/* - if (len == 0) - return (0); -*/ - idx = MINOR(filp->f_dentry->d_inode->i_rdev); - info = &isp[idx]; - - // check if reception in progress - if (info->rxbuf != NULL) - return -EBUSY; - - info->rxbuf = kmalloc(len+ 3, GFP_KERNEL); - if (info->rxbuf == NULL) - return -ENOMEM; - - ret_val = ifx_ssc_read_helper(info, info->rxbuf, len, 0); - // ### TO DO: perhaps warn if ret_val != len - if (copy_to_user((void*)ubuf, info->rxbuf, ret_val) != 0) - ret_val = -EFAULT; - - ifx_int_wrapper.disable(info->rxirq); - - kfree(info->rxbuf); - info->rxbuf = NULL; - return (ret_val); -} // ifx_ssc_read - -/* - * As many bytes as we have free space for are copied from the user - * into txbuf and the actual byte count is returned. The transmission is - * always kicked off by calling the appropriate TX routine. - */ -static ssize_t -ifx_ssc_write(struct file *filp, const char *ubuf, size_t len, loff_t *off) -{ - int idx; - struct ifx_ssc_port *info; - int ret_val; - - if (len == 0) - return (0); - - idx = MINOR(filp->f_dentry->d_inode->i_rdev); - info = &isp[idx]; - - // check if transmission in progress - if (info->txbuf != NULL) - return -EBUSY; - - info->txbuf = kmalloc(len+ 3, GFP_KERNEL); - if (info->txbuf == NULL) - return -ENOMEM; - - ret_val = copy_from_user(info->txbuf, ubuf, len); - if (ret_val == 0) - ret_val = ifx_ssc_write_helper(info, info->txbuf, len, 0); - else - ret_val = -EFAULT; - if (ret_val < 0) { - kfree(info->txbuf); // otherwise will be done in ISR - info->txbuf = NULL; - } - return (ret_val); -} /* ifx_ssc_write */ - - -/* - * ------------------------------------------------------------ - * ifx_ssc_ioctl() and friends - * ------------------------------------------------------------ - */ - -/*----------------------------------------------------------------------------- - FUNC-NAME : ifx_ssc_frm_status_get - LONG-NAME : framing status get - PURPOSE : Get the actual status of the framing. - - PARAMETER : *info pointer to the port-specific structure ifx_ssc_port. - - RESULT : pointer to a structure ifx_ssc_frm_status which holds busy and - count values. - - REMARKS : Returns a register value independent of framing is enabled or - not! Changes structure inside of info, so the return value isn't - needed at all, but could be used for simple access. ------------------------------------------------------------------------------*/ -static struct ifx_ssc_frm_status * -ifx_ssc_frm_status_get(struct ifx_ssc_port *info) -{ - unsigned long tmp; - - tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFSTAT); - info->frm_status.DataBusy = (tmp & IFX_SSC_SFSTAT_IN_DATA) > 0; - info->frm_status.PauseBusy = (tmp & IFX_SSC_SFSTAT_IN_PAUSE) > 0; - info->frm_status.DataCount = (tmp & IFX_SSC_SFSTAT_DATA_COUNT_MASK) - >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET; - info->frm_status.PauseCount = (tmp & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) - >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET; - tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFCON); - info->frm_status.EnIntAfterData = - (tmp & IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE) > 0; - info->frm_status.EnIntAfterPause = - (tmp & IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE) > 0; - return (&info->frm_status); -} // ifx_ssc_frm_status_get - - -/*----------------------------------------------------------------------------- - FUNC-NAME : ifx_ssc_frm_control_get - LONG-NAME : framing control get - PURPOSE : Get the actual control values of the framing. - - PARAMETER : *info pointer to the port-specific structure ifx_ssc_port. - - RESULT : pointer to a structure ifx_ssc_frm_opts which holds control bits - and count reload values. - - REMARKS : Changes structure inside of info, so the return value isn't - needed at all, but could be used for simple access. ------------------------------------------------------------------------------*/ -static struct ifx_ssc_frm_opts * -ifx_ssc_frm_control_get(struct ifx_ssc_port *info) -{ - unsigned long tmp; - - tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFCON); - info->frm_opts.FrameEnable = (tmp & IFX_SSC_SFCON_SF_ENABLE) > 0; - info->frm_opts.DataLength = (tmp & IFX_SSC_SFCON_DATA_LENGTH_MASK) - >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET; - info->frm_opts.PauseLength = (tmp & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) - >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET; - info->frm_opts.IdleData = (tmp & IFX_SSC_SFCON_PAUSE_DATA_MASK) - >> IFX_SSC_SFCON_PAUSE_DATA_OFFSET; - info->frm_opts.IdleClock = (tmp & IFX_SSC_SFCON_PAUSE_CLOCK_MASK) - >> IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET; - info->frm_opts.StopAfterPause = - (tmp & IFX_SSC_SFCON_STOP_AFTER_PAUSE) > 0; - return (&info->frm_opts); -} // ifx_ssc_frm_control_get - - -/*----------------------------------------------------------------------------- - FUNC-NAME : ifx_ssc_frm_control_set - LONG-NAME : framing control set - PURPOSE : Set the actual control values of the framing. - - PARAMETER : *info pointer to the port-specific structure ifx_ssc_port. - - RESULT : pointer to a structure ifx_ssc_frm_opts which holds control bits - and count reload values. - - REMARKS : ------------------------------------------------------------------------------*/ -static int -ifx_ssc_frm_control_set(struct ifx_ssc_port *info) -{ - unsigned long tmp; - - // check parameters - if ((info->frm_opts.DataLength > IFX_SSC_SFCON_DATA_LENGTH_MAX) || - (info->frm_opts.DataLength < 1) || - (info->frm_opts.PauseLength > IFX_SSC_SFCON_PAUSE_LENGTH_MAX) || - (info->frm_opts.PauseLength < 1) || - ((info->frm_opts.IdleData & ~(IFX_SSC_SFCON_PAUSE_DATA_MASK >> - IFX_SSC_SFCON_PAUSE_DATA_OFFSET)) != 0 ) || - ((info->frm_opts.IdleClock & ~(IFX_SSC_SFCON_PAUSE_CLOCK_MASK >> - IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET)) != 0 )) - return -EINVAL; - - // read interrupt bits (they're not changed here) - tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFCON) & - (IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE | - IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE); - - // set all values with respect to it's bit position (for data and pause - // length set N-1) - tmp = (info->frm_opts.DataLength - 1) << IFX_SSC_SFCON_DATA_LENGTH_OFFSET; - tmp |= (info->frm_opts.PauseLength - 1) << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET; - tmp |= info->frm_opts.IdleData << IFX_SSC_SFCON_PAUSE_DATA_OFFSET; - tmp |= info->frm_opts.IdleClock << IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET; - tmp |= info->frm_opts.FrameEnable * IFX_SSC_SFCON_SF_ENABLE; - tmp |= info->frm_opts.StopAfterPause * IFX_SSC_SFCON_STOP_AFTER_PAUSE; - - WRITE_PERIPHERAL_REGISTER(tmp, info->mapbase + IFX_SSC_SFCON); - - return 0; -} // ifx_ssc_frm_control_set - - -/*----------------------------------------------------------------------------- - FUNC-NAME : ifx_ssc_rxtx_mode_set - LONG-NAME : rxtx mode set - PURPOSE : Set the transmission mode. - - PARAMETER : *info pointer to the port-specific structure ifx_ssc_port. - - RESULT : Returns error code - - REMARKS : Assumes that SSC not used (SSC disabled, device not opened yet - or just closed) ------------------------------------------------------------------------------*/ -static int -ifx_ssc_rxtx_mode_set(struct ifx_ssc_port *info, unsigned int val) -{ - unsigned long tmp; - - // check parameters - if (!(info) || (val & ~(IFX_SSC_MODE_MASK))) - return -EINVAL; - /*check BUSY and RXCNT*/ - if ( READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_BUSY - ||READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) & IFX_SSC_RXCNT_TODO_MASK) - return -EBUSY; - // modify - tmp = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_CON) & - ~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF)) | (val); - WRITE_PERIPHERAL_REGISTER(tmp, info->mapbase + IFX_SSC_CON); - info->opts.modeRxTx = val; -/* - printk(KERN_DEBUG "IFX SSC%d: Setting mode to %s%s\n", - info->port_nr, - ((val & IFX_SSC_CON_RX_OFF) == 0) ? "rx ":"", - ((val & IFX_SSC_CON_TX_OFF) == 0) ? "tx":""); -*/ - return 0; -} // ifx_ssc_rxtx_mode_set - -void ifx_gpio_init(void) -{ - u32 temp; -/* set gpio pin p0.10(SPI_DIN) p0.11(SPI_DOUT) p0.12(SPI_CLK) p0.13(SPI_CS2) direction */ - temp = *(AMAZON_GPIO_P0_DIR) ; - temp &= 0xFFFFFBFF; - temp |= 0x3800; - *(AMAZON_GPIO_P0_DIR) = temp; -/* set port 0 alternate select register 0 */ - temp = *(AMAZON_GPIO_P0_ALTSEL0) ; - temp &= 0xFFFFC3FF; - temp |= 0x00001c00; - *(AMAZON_GPIO_P0_ALTSEL0) = temp; - -/* set port 0 alternate select register 1 */ - temp = *(AMAZON_GPIO_P0_ALTSEL1) ; - temp &= 0xFFFFC3FF; - temp |= 0x00002000; - *(AMAZON_GPIO_P0_ALTSEL1) = temp; - -/* set port 0 open drain mode register */ - temp = *(AMAZON_GPIO_P0_OD); - temp |= 0x00003800; /* set output pin normal mode */ - *(AMAZON_GPIO_P0_OD)= temp; -} - -/* - * This routine intializes the SSC appropriately depending - * on slave/master and full-/half-duplex mode. - * It assumes that the SSC is disabled and the fifo's and buffers - * are flushes later on. - */ -static int -ifx_ssc_sethwopts(struct ifx_ssc_port *info) -{ - unsigned long flags, bits; - struct ifx_ssc_hwopts *opts = &info->opts; - - /* sanity checks */ - if ((opts->dataWidth < IFX_SSC_MIN_DATA_WIDTH) || - (opts->dataWidth > IFX_SSC_MAX_DATA_WIDTH)) { - printk("%s: sanity check failed\n", __FUNCTION__); - return -EINVAL; - } - bits = (opts->dataWidth - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET; - bits |= IFX_SSC_CON_ENABLE_BYTE_VALID; -// if (opts->abortErrDetect) -// bits |= IFX_SSC_CON_ABORT_ERR_CHECK; - if (opts->rxOvErrDetect) - bits |= IFX_SSC_CON_RX_OFL_CHECK; - if (opts->rxUndErrDetect) - bits |= IFX_SSC_CON_RX_UFL_CHECK; - if (opts->txOvErrDetect) - bits |= IFX_SSC_CON_TX_OFL_CHECK; - if (opts->txUndErrDetect) - bits |= IFX_SSC_CON_TX_UFL_CHECK; - if (opts->loopBack) - bits |= IFX_SSC_CON_LOOPBACK_MODE; - if (opts->echoMode) - bits |= IFX_SSC_CON_ECHO_MODE_ON; - if (opts->headingControl) - bits |= IFX_SSC_CON_MSB_FIRST; - if (opts->clockPhase) - bits |= IFX_SSC_CON_LATCH_THEN_SHIFT; - if (opts->clockPolarity) - bits |= IFX_SSC_CON_CLOCK_FALL; - switch (opts->modeRxTx) { - case IFX_SSC_MODE_TX: - bits |= IFX_SSC_CON_RX_OFF; - break; - case IFX_SSC_MODE_RX: - bits |= IFX_SSC_CON_TX_OFF; - break; - } // switch (opts->modeRxT) - local_irq_save(flags); - WRITE_PERIPHERAL_REGISTER(bits, info->mapbase + IFX_SSC_CON); - WRITE_PERIPHERAL_REGISTER((info->opts.gpoCs << IFX_SSC_GPOCON_ISCSB0_POS) | - (info->opts.gpoInv << IFX_SSC_GPOCON_INVOUT0_POS), - info->mapbase + IFX_SSC_GPOCON); - //master mode - if (opts->masterSelect){ - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_MASTER_SELECT,info->mapbase + IFX_SSC_WHBSTATE); - }else{ - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_MASTER_SELECT,info->mapbase + IFX_SSC_WHBSTATE); - } - // init serial framing - WRITE_PERIPHERAL_REGISTER(0, info->mapbase + IFX_SSC_SFCON); - /* set up the port pins */ - //check for general requirements to switch (external) pad/pin characteristics - ifx_gpio_init(); - local_irq_restore(flags); - - return 0; -} // ifx_ssc_sethwopts - -static int -ifx_ssc_set_baud(struct ifx_ssc_port *info, unsigned int baud) -{ - unsigned int ifx_ssc_clock; - unsigned int br; - unsigned long flags; - bool enabled; - - ifx_ssc_clock = ifx_ssc_get_kernel_clk(info); - if (ifx_ssc_clock ==0) - return -EINVAL; - - local_irq_save(flags); - /* have to disable the SSC to set the baudrate */ - enabled = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) - & IFX_SSC_STATE_IS_ENABLED) != 0; - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE, - info->mapbase + IFX_SSC_WHBSTATE); - - // compute divider - br = ((ifx_ssc_clock >> 1)/baud) - 1; - asm("SYNC"); - if (br > 0xffff || - ((br == 0) && - ((READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) & - IFX_SSC_STATE_IS_MASTER) == 0))){ - local_irq_restore(flags); - printk("%s: illegal baudrate %u\n", __FUNCTION__, baud); - return -EINVAL; - } - WRITE_PERIPHERAL_REGISTER(br, info->mapbase + IFX_SSC_BR); - if (enabled) - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE, - info->mapbase + IFX_SSC_WHBSTATE); - - local_irq_restore(flags); - return 0; -} // ifx_ssc_set_baud - -static int -ifx_ssc_hwinit(struct ifx_ssc_port *info) -{ - unsigned long flags; - bool enabled; - - /* have to disable the SSC */ - enabled = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) - & IFX_SSC_STATE_IS_ENABLED) != 0; - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE, - info->mapbase + IFX_SSC_WHBSTATE); - - if (ifx_ssc_sethwopts(info) < 0) - { - printk("%s: setting the hardware options failed\n", - __FUNCTION__); - return -EINVAL; - } - - if (ifx_ssc_set_baud(info, info->baud) < 0) { - printk("%s: setting the baud rate failed\n", __FUNCTION__); - return -EINVAL; - } - local_irq_save(flags); - /* TX FIFO */ - WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_TXFIFO_FL << - IFX_SSC_XFCON_ITL_OFFSET) | - IFX_SSC_XFCON_FIFO_ENABLE, - info->mapbase + IFX_SSC_TXFCON); - /* RX FIFO */ - WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_RXFIFO_FL << - IFX_SSC_XFCON_ITL_OFFSET) | - IFX_SSC_XFCON_FIFO_ENABLE, - info->mapbase + IFX_SSC_RXFCON); - local_irq_restore(flags); - if (enabled) - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE, - info->mapbase + IFX_SSC_WHBSTATE); - return 0; -} // ifx_ssc_hwinit - -/*----------------------------------------------------------------------------- - FUNC-NAME : ifx_ssc_batch_exec - LONG-NAME : - PURPOSE : - - PARAMETER : *info pointer to the port-specific structure ifx_ssc_port. - - RESULT : Returns error code - - REMARKS : ------------------------------------------------------------------------------*/ -static int -ifx_ssc_batch_exec(struct ifx_ssc_port *info, struct ifx_ssc_batch_list *batch_anchor) -{ - // ### TO DO: implement user space batch execution - // first, copy the whole linked list from user to kernel space - // save some hardware options - // execute list - // restore hardware options if selected - return -EFAULT; -} // ifx_ssc_batch_exec - - -/* - * This routine allows the driver to implement device- - * specific ioctl's. If the ioctl number passed in cmd is - * not recognized by the driver, it should return ENOIOCTLCMD. - */ -int -ifx_ssc_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, - unsigned long data) -{ - struct ifx_ssc_port *info; - int line, ret_val = 0; - unsigned long flags; - unsigned long tmp; - int from_kernel = 0; - - if ((inode == (struct inode *)0) || (inode == (struct inode *)1)) - { - from_kernel = 1; - line = (int)inode; - } - else - line = MINOR(filp->f_dentry->d_inode->i_rdev); - - /* don't use more minor devices than we can support */ - if (line < 0 || line >= PORT_CNT) - return -ENXIO; - - info = &isp[line]; - - switch (cmd) { - case IFX_SSC_STATS_READ: - /* data must be a pointer to a struct ifx_ssc_statistics */ - if (from_kernel) - memcpy((void *)data, (void *)&info->stats, - sizeof(struct ifx_ssc_statistics)); - else - if (copy_to_user((void *)data, - (void *)&info->stats, - sizeof(struct ifx_ssc_statistics))) - ret_val = -EFAULT; - break; - case IFX_SSC_STATS_RESET: - /* just resets the statistics counters */ - memset((void *)&info->stats, 0, sizeof(struct ifx_ssc_statistics)); - break; - case IFX_SSC_BAUD_SET: - /* if the buffers are not empty then the port is */ - /* busy and we shouldn't change things on-the-fly! */ - if (!info->txbuf || !info->rxbuf || - (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) - & IFX_SSC_STATE_BUSY)) { - ret_val = -EBUSY; - break; - } - /* misuse flags */ - if (from_kernel) - flags = *((unsigned long *)data); - else - if (copy_from_user((void *)&flags, - (void *)data, sizeof(flags))) - { - ret_val = -EFAULT; - break; - } - if (flags == 0) - { - ret_val = -EINVAL; - break; - } - if (ifx_ssc_set_baud(info, flags) < 0) - { - ret_val = -EINVAL; - break; - } - info->baud = flags; - break; - case IFX_SSC_BAUD_GET: - if (from_kernel) - *((unsigned int *)data) = info->baud; - else - if (copy_to_user((void *)data, - (void *)&info->baud, - sizeof(unsigned long))) - ret_val = -EFAULT; - break; - case IFX_SSC_RXTX_MODE_SET: - if (from_kernel) - tmp = *((unsigned long *)data); - else - if (copy_from_user((void *)&tmp, - (void *)data, sizeof(tmp))) { - ret_val = -EFAULT; - break; - } - ret_val = ifx_ssc_rxtx_mode_set(info, tmp); - break; - case IFX_SSC_RXTX_MODE_GET: - tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_CON) & - (~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF)); - if (from_kernel) - *((unsigned int *)data) = tmp; - else - if (copy_to_user((void *)data, - (void *)&tmp, - sizeof(tmp))) - ret_val = -EFAULT; - break; - - case IFX_SSC_ABORT: - ifx_ssc_abort(info); - break; - - case IFX_SSC_GPO_OUT_SET: - if (from_kernel) - tmp = *((unsigned long *)data); - else - if (copy_from_user((void *)&tmp, - (void *)data, sizeof(tmp))) { - ret_val = -EFAULT; - break; - } - if (tmp > IFX_SSC_MAX_GPO_OUT) - ret_val = -EINVAL; - else - WRITE_PERIPHERAL_REGISTER - (1<<(tmp + IFX_SSC_WHBGPOSTAT_SETOUT0_POS), - info->mapbase + IFX_SSC_WHBGPOSTAT); - break; - case IFX_SSC_GPO_OUT_CLR: - if (from_kernel) - tmp = *((unsigned long *)data); - else - if (copy_from_user((void *)&tmp, - (void *)data, sizeof(tmp))) { - ret_val = -EFAULT; - break; - } - if (tmp > IFX_SSC_MAX_GPO_OUT) - ret_val = -EINVAL; - else { - WRITE_PERIPHERAL_REGISTER - (1<<(tmp + IFX_SSC_WHBGPOSTAT_CLROUT0_POS), - info->mapbase + IFX_SSC_WHBGPOSTAT); - } - break; - case IFX_SSC_GPO_OUT_GET: - tmp = READ_PERIPHERAL_REGISTER - (info->mapbase + IFX_SSC_GPOSTAT); - if (from_kernel) - *((unsigned int *)data) = tmp; - else - if (copy_to_user((void *)data, - (void *)&tmp, - sizeof(tmp))) - ret_val = -EFAULT; - break; - case IFX_SSC_FRM_STATUS_GET: - ifx_ssc_frm_status_get(info); - if (from_kernel) - memcpy((void *)data, (void *)&info->frm_status, - sizeof(struct ifx_ssc_frm_status)); - else - if (copy_to_user((void *)data, - (void *)&info->frm_status, - sizeof(struct ifx_ssc_frm_status))) - ret_val = -EFAULT; - break; - case IFX_SSC_FRM_CONTROL_GET: - ifx_ssc_frm_control_get(info); - if (from_kernel) - memcpy((void *)data, (void *)&info->frm_opts, - sizeof(struct ifx_ssc_frm_opts)); - else - if (copy_to_user((void *)data, - (void *)&info->frm_opts, - sizeof(struct ifx_ssc_frm_opts))) - ret_val = -EFAULT; - break; - case IFX_SSC_FRM_CONTROL_SET: - if (from_kernel) - memcpy((void *)&info->frm_opts, (void *)data, - sizeof(struct ifx_ssc_frm_opts)); - else - if (copy_to_user((void *)&info->frm_opts, - (void *)data, - sizeof(struct ifx_ssc_frm_opts))){ - ret_val = -EFAULT; - break; - } - ret_val = ifx_ssc_frm_control_set(info); - break; - case IFX_SSC_HWOPTS_SET: - /* data must be a pointer to a struct ifx_ssc_hwopts */ - /* if the buffers are not empty then the port is */ - /* busy and we shouldn't change things on-the-fly! */ - if (!info->txbuf || !info->rxbuf || - (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) - & IFX_SSC_STATE_BUSY)) { - ret_val = -EBUSY; - break; - } - if (from_kernel) - memcpy((void *)&info->opts, (void *)data, - sizeof(struct ifx_ssc_hwopts)); - else - if (copy_from_user((void *)&info->opts, - (void *)data, - sizeof(struct ifx_ssc_hwopts))) - { - ret_val = -EFAULT; - break; - } - if (ifx_ssc_hwinit(info) < 0) - { - ret_val = -EIO; - } - break; - case IFX_SSC_HWOPTS_GET: - /* data must be a pointer to a struct ifx_ssc_hwopts */ - if (from_kernel) - memcpy((void *)data, (void *)&info->opts, - sizeof(struct ifx_ssc_hwopts)); - else - if (copy_to_user((void *)data, - (void *)&info->opts, - sizeof(struct ifx_ssc_hwopts))) - ret_val = -EFAULT; - break; - default: - ret_val = -ENOIOCTLCMD; - } - - return ret_val; -} /* ifx_ssc_ioctl */ -EXPORT_SYMBOL(ifx_ssc_ioctl); - -///* the poll routine */ -//static unsigned int -//ifx_ssc_poll(struct file *filp, struct poll_table_struct *pts) -//{ -// int unit = MINOR(filp->f_dentry->d_inode->i_rdev); -// struct ifx_ssc_port *info; -// unsigned int mask = 0; -// int spc; -// -// info = &isp[unit]; -// -// /* add event to the wait queues */ -// /* DO NOT FORGET TO DO A WAKEUP ON THESE !!!! */ -// poll_wait(filp, &info->pwait, pts); -// -// /* are there bytes in the RX SW-FIFO? */ -// if (info->rxrp != info->rxwp) -// mask |= POLLIN | POLLRDNORM; -// -// /* free space in the TX SW-FIFO */ -// spc = info->txrp - info->txwp - 1; -// if (spc < 0) -// spc += TX_BUFSIZE; -//#ifdef IFX_SSC_USEDMA -// /* writing always works, except in the DMA case when all descriptors */ -// /* are used up */ -// if (unit == 1 && info->dma_freecnt == 0) -// spc = 0; -//#endif -// if (spc > 0) -// mask |= POLLOUT | POLLWRNORM; -// -// return (mask); -//} - -static int -ifx_ssc1_read_proc(char *page, char **start, off_t offset, int count, int *eof, void *data) -{ - int off = 0; - unsigned long flags; - - /* don't want any interrupts here */ - save_flags(flags); - cli(); - - - /* print statistics */ - off += sprintf(page+off, "Statistics for Infineon Synchronous Serial Controller SSC1\n"); - off += sprintf(page+off, "RX overflow errors %d\n", isp[0].stats.rxOvErr); - off += sprintf(page+off, "RX underflow errors %d\n", isp[0].stats.rxUnErr); - off += sprintf(page+off, "TX overflow errors %d\n", isp[0].stats.txOvErr); - off += sprintf(page+off, "TX underflow errors %d\n", isp[0].stats.txUnErr); - off += sprintf(page+off, "Abort errors %d\n", isp[0].stats.abortErr); - off += sprintf(page+off, "Mode errors %d\n", isp[0].stats.modeErr); - off += sprintf(page+off, "RX Bytes %d\n", isp[0].stats.rxBytes); - off += sprintf(page+off, "TX Bytes %d\n", isp[0].stats.txBytes); - - restore_flags (flags); /* XXXXX */ - *eof = 1; - return (off); -} - - -/* - * This routine prints out the appropriate serial driver version number - */ -static inline void -show_version(void) -{ -#if 0 - printk("Infineon Technologies Synchronous Serial Controller (SSC) driver\n" - " version %s - built %s %s\n", IFX_SSC_DRV_VERSION, __DATE__, __TIME__); -#endif -} /* show_version */ - - -/* - * Due to the fact that a port can be dynamically switched between slave - * and master mode using an IOCTL the hardware is not initialized here, - * but in ifx_ssc_hwinit() as a result of an IOCTL. - */ -int __init -ifx_ssc_init(void) -{ - struct ifx_ssc_port *info; - int i, nbytes; - unsigned long flags; - int ret_val; - - // ### TO DO: dynamic port count evaluation due to pin multiplexing - - ret_val = -ENOMEM; - nbytes = PORT_CNT * sizeof(struct ifx_ssc_port); - isp = (struct ifx_ssc_port *)kmalloc(nbytes, GFP_KERNEL); - if (isp == NULL) - { - printk("%s: no memory for isp\n", __FUNCTION__); - return (ret_val); - } - memset(isp, 0, nbytes); - - show_version(); - - /* register the device */ - ret_val = -ENXIO; -/* - i = maj; -*/ - if ((i = register_chrdev(maj, "ssc", &ifx_ssc_fops)) < 0) - { - printk("Unable to register major %d for the Infineon SSC\n", maj); - if (maj == 0){ - goto errout; - } - else{ - maj = 0; - if ((i = register_chrdev(maj, "ssc", &ifx_ssc_fops)) < 0) - { - printk("Unable to register major %d for the Infineon SSC\n", maj); - goto errout; - } - } - } - if (maj == 0) maj = i; - //printk("registered major %d for Infineon SSC\n", maj); - - /* set default values in ifx_ssc_port */ - for (i = 0; i < PORT_CNT; i++) { - info = &isp[i]; - info->port_nr = i; - /* default values for the HwOpts */ - info->opts.AbortErrDetect = IFX_SSC_DEF_ABRT_ERR_DETECT; - info->opts.rxOvErrDetect = IFX_SSC_DEF_RO_ERR_DETECT; - info->opts.rxUndErrDetect = IFX_SSC_DEF_RU_ERR_DETECT; - info->opts.txOvErrDetect = IFX_SSC_DEF_TO_ERR_DETECT; - info->opts.txUndErrDetect = IFX_SSC_DEF_TU_ERR_DETECT; - info->opts.loopBack = IFX_SSC_DEF_LOOP_BACK; - info->opts.echoMode = IFX_SSC_DEF_ECHO_MODE; - info->opts.idleValue = IFX_SSC_DEF_IDLE_DATA; - info->opts.clockPolarity = IFX_SSC_DEF_CLOCK_POLARITY; - info->opts.clockPhase = IFX_SSC_DEF_CLOCK_PHASE; - info->opts.headingControl = IFX_SSC_DEF_HEADING_CONTROL; - info->opts.dataWidth = IFX_SSC_DEF_DATA_WIDTH; - info->opts.modeRxTx = IFX_SSC_DEF_MODE_RXTX; - info->opts.gpoCs = IFX_SSC_DEF_GPO_CS; - info->opts.gpoInv = IFX_SSC_DEF_GPO_INV; - info->opts.masterSelect = IFX_SSC_DEF_MASTERSLAVE; - info->baud = IFX_SSC_DEF_BAUDRATE; - info->rxbuf = NULL; - info->txbuf = NULL; - /* values specific to SSC1 */ - if (i == 0) { - info->mapbase = AMAZON_SSC_BASE_ADD_0; - // ### TO DO: power management - - // setting interrupt vectors - info->txirq = IFX_SSC_TIR; - info->rxirq = IFX_SSC_RIR; - info->errirq = IFX_SSC_EIR; -/* - info->frmirq = IFX_SSC_FIR; -*/ - } - /* activate SSC */ - /* CLC.DISS = 0 */ - WRITE_PERIPHERAL_REGISTER(IFX_SSC_DEF_RMC << IFX_CLC_RUN_DIVIDER_OFFSET, info->mapbase + IFX_SSC_CLC); - -// ### TO DO: multiple instances - - init_waitqueue_head(&info->rwait); - //init_waitqueue_head(&info->pwait); - - local_irq_save(flags); - - // init serial framing register - WRITE_PERIPHERAL_REGISTER(IFX_SSC_DEF_SFCON, info->mapbase + IFX_SSC_SFCON); - - /* try to get the interrupts */ - // ### TO DO: interrupt handling with multiple instances - ret_val = ifx_int_wrapper.request(info->txirq, ifx_ssc_tx_int, - 0, "ifx_ssc_tx", info); - if (ret_val){ - printk("%s: unable to get irq %d\n", __FUNCTION__, - info->txirq); - local_irq_restore(flags); - goto errout; - } - ret_val = ifx_int_wrapper.request(info->rxirq, ifx_ssc_rx_int, - 0, "ifx_ssc_rx", info); - if (ret_val){ - printk("%s: unable to get irq %d\n", __FUNCTION__, - info->rxirq); - local_irq_restore(flags); - goto irqerr; - } - ret_val = ifx_int_wrapper.request(info->errirq, ifx_ssc_err_int, - 0, "ifx_ssc_err", info); - if (ret_val){ - printk("%s: unable to get irq %d\n", __FUNCTION__, - info->errirq); - local_irq_restore(flags); - goto irqerr; - } -/* - ret_val = ifx_int_wrapper.request(info->frmirq, ifx_ssc_frm_int, - 0, "ifx_ssc_frm", info); - if (ret_val){ - printk("%s: unable to get irq %d\n", __FUNCTION__, - info->frmirq); - local_irq_restore(flags); - goto irqerr; - } - -*/ - WRITE_PERIPHERAL_REGISTER(IFX_SSC_DEF_IRNEN, info->mapbase + IFX_SSC_IRN_EN); - - local_irq_restore(flags); - } // for (i = 0; i < PORT_CNT; i++) - - /* init the SSCs with default values */ - for (i = 0; i < PORT_CNT; i++) - { - info = &isp[i]; - if (ifx_ssc_hwinit(info) < 0) - { - printk("%s: hardware init failed for port %d\n", - __FUNCTION__, i); - goto irqerr; - } - } - - /* register /proc read handler */ - // ### TO DO: multiple instances - /* for SSC1, which is always present */ - create_proc_read_entry("driver/ssc1", 0, NULL, ifx_ssc1_read_proc, NULL); - return 0; - -irqerr: - // ### TO DO: multiple instances - ifx_int_wrapper.free(isp[0].txirq,&isp[0]); - ifx_int_wrapper.free(isp[0].rxirq,&isp[0]); - ifx_int_wrapper.free(isp[0].errirq,&isp[0]); -/* - ifx_int_wrapper.free(isp[0].frmirq, &isp[0]); -*/ -errout: - /* free up any allocated memory in the error case */ - kfree(isp); - return (ret_val); -} /* ifx_ssc_init */ - - -void -ifx_ssc_cleanup_module(void) -{ - int i; - - /* free up any allocated memory */ - for (i = 0; i < PORT_CNT; i++) - { - /* disable the SSC */ - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE,isp[i].mapbase + IFX_SSC_WHBSTATE); - /* free the interrupts */ - ifx_int_wrapper.free(isp[i].txirq, &isp[i]); - ifx_int_wrapper.free(isp[i].rxirq, &isp[i]); - ifx_int_wrapper.free(isp[i].errirq, &isp[i]); -/* - ifx_int_wrapper.free(isp[i].frmirq, &isp[i]); - - if (isp[i].rxbuf != NULL) - kfree(isp[i].rxbuf); - if (isp[i].txbuf != NULL) - kfree(isp[i].txbuf); -*/ - } - kfree(isp); - /* unregister the device */ - if (unregister_chrdev(maj, "ssc")) - { - printk("Unable to unregister major %d for the SSC\n", maj); - } - /* delete /proc read handler */ - remove_proc_entry("driver/ssc1", NULL); - remove_proc_entry("driver/ssc2", NULL); -} /* ifx_ssc_cleanup_module */ - -module_exit(ifx_ssc_cleanup_module); - -/* Module entry-points */ -module_init(ifx_ssc_init); - -#ifndef MODULE -static int __init -ifx_ssc_set_maj(char *str) -{ - maj = simple_strtol(str, NULL, 0); - return 1; -} -__setup("ssc_maj=", ifx_ssc_set_maj); -#endif /* !MODULE */ - -#define AMAZON_SSC_EMSG(fmt,arg...) printk("%s: "fmt,__FUNCTION__, ##arg) -/* Brief: chip select enable - */ -inline int amazon_ssc_cs_low(u32 pin) -{ - int ret=0; - if ((ret=ifx_ssc_ioctl((struct inode *)0, NULL,IFX_SSC_GPO_OUT_CLR, (unsigned long)&pin))){ - AMAZON_SSC_EMSG("clear CS %d fails\n",pin); - } - wmb(); - return ret; -} -EXPORT_SYMBOL(amazon_ssc_cs_low); -/* Brief: chip select disable - */ -inline int amazon_ssc_cs_high(u32 pin) -{ - int ret=0; - if ((ret=ifx_ssc_ioctl((struct inode *)0, NULL,IFX_SSC_GPO_OUT_SET, (unsigned long)&pin))){ - AMAZON_SSC_EMSG("set CS %d fails\n", pin); - } - wmb(); - return ret; -} -EXPORT_SYMBOL(amazon_ssc_cs_high); -/* Brief: one SSC session - * Parameter: - * tx_buf - * tx_len - * rx_buf - * rx_len - * session_mode: IFX_SSC_MODE_RXTX or IFX_SSC_MODE_TX - * Return: >=0 number of bytes received (if rx_buf != 0) or transmitted - * <0 error code - * Description: - * 0. copy data to internal buffer - * 1. Write command - * 2a. If SSC_SESSION_MODE_TXONLY, read tx_len data - * 2b. If not Read back (tx_len + rx_len) data - * 3. copy internal buffer to rx buf if necessary - */ -static int ssc_session(char * tx_buf, u32 tx_len, char * rx_buf, u32 rx_len) -{ - int ret=0; - - char * ssc_tx_buf=NULL; - char * ssc_rx_buf=NULL; - -// volatile char ssc_tx_buf[128]={0}; -// volatile char ssc_rx_buf[128]={0}; - - int eff_size=0; - u8 mode=0; - - if (tx_buf == NULL && tx_len ==0 && rx_buf == NULL && rx_len == 0){ - AMAZON_SSC_EMSG("invalid parameters\n"); - ret=-EINVAL; - goto ssc_session_exit; - }else if (tx_buf == NULL || tx_len == 0){ - if (rx_buf != NULL && rx_len != 0){ - mode = IFX_SSC_MODE_RX; - }else{ - AMAZON_SSC_EMSG("invalid parameters\n"); - ret=-EINVAL; - goto ssc_session_exit; - } - }else if (rx_buf == NULL || rx_len ==0){ - if (tx_buf != NULL && tx_len != 0){ - mode = IFX_SSC_MODE_TX; - }else{ - AMAZON_SSC_EMSG("invalid parameters\n"); - ret=-EINVAL; - goto ssc_session_exit; - } - }else{ - mode = IFX_SSC_MODE_RXTX; - } - - if (mode == IFX_SSC_MODE_RXTX){ - eff_size = tx_len + rx_len; - }else if (mode == IFX_SSC_MODE_RX){ - eff_size = rx_len; - }else{ - eff_size = tx_len; - } - - //4 bytes alignment, required by driver - /* change by TaiCheng */ - //if (in_irq()){ - if (1){ - ssc_tx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_ATOMIC); - ssc_rx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_ATOMIC); - }else{ - ssc_tx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_KERNEL); - ssc_rx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_KERNEL); - } - if (ssc_tx_buf == NULL || ssc_rx_buf == NULL){ - AMAZON_SSC_EMSG("no memory for size of %d\n", eff_size); - ret = -ENOMEM; - goto ssc_session_exit; - } - memset((void*)ssc_tx_buf, 0, eff_size); - memset((void*)ssc_rx_buf, 0, eff_size); - - if (tx_len>0){ - memcpy(ssc_tx_buf, tx_buf, tx_len); - } - - ret=ifx_ssc_kwrite(0, ssc_tx_buf, eff_size); - - if (ret > 0) { - ssc_tx_buf = NULL; //should be freed by ifx_ssc_kwrite - } - - if ( ret != eff_size ){ - AMAZON_SSC_EMSG("ifx_ssc_write return %d\n",ret); - goto ssc_session_exit; - } - ret=ifx_ssc_kread(0, ssc_rx_buf,eff_size); - if ( ret != eff_size ){ - AMAZON_SSC_EMSG("ifx_ssc_read return %d\n",ret); - goto ssc_session_exit; - } - - memcpy(rx_buf, ssc_rx_buf+tx_len, rx_len); - - if (mode == IFX_SSC_MODE_TX) { - ret = tx_len; - }else{ - ret = rx_len; - } -ssc_session_exit: - - if (ssc_tx_buf != NULL) kfree(ssc_tx_buf); - if (ssc_rx_buf != NULL) kfree(ssc_rx_buf); - - if (ret<0) { - printk("ssc session fails\n"); - } - return ret; -} -/* Brief: TX-RX session - * Parameter: - * tx_buf - * tx_len - * rx_buf - * rx_len - * Return: >=0 number of bytes received - * <0 error code - * Description: - * 1. TX session - * 2. RX session - */ -int amazon_ssc_txrx(char * tx_buf, u32 tx_len, char * rx_buf, u32 rx_len) -{ - return ssc_session(tx_buf,tx_len,rx_buf,rx_len); -} -EXPORT_SYMBOL(amazon_ssc_txrx); -/* Brief: TX only session - * Parameter: - * tx_buf - * tx_len - * Return: >=0 number of bytes transmitted - * <0 error code - */ -int amazon_ssc_tx(char * tx_buf, u32 tx_len) -{ - return ssc_session(tx_buf,tx_len,NULL,0); -} -EXPORT_SYMBOL(amazon_ssc_tx); -/* Brief: RX only session - * Parameter: - * rx_buf - * rx_len - * Return: >=0 number of bytes received - * <0 error code - */ -int amazon_ssc_rx(char * rx_buf, u32 rx_len) -{ - return ssc_session(NULL,0,rx_buf,rx_len); -} -EXPORT_SYMBOL(amazon_ssc_rx); - diff --git a/target/linux/amazon/files/drivers/mtd/maps/amazon.c b/target/linux/amazon/files/drivers/mtd/maps/amazon.c deleted file mode 100644 index 568f7d828d..0000000000 --- a/target/linux/amazon/files/drivers/mtd/maps/amazon.c +++ /dev/null @@ -1,204 +0,0 @@ -/* - * Handle mapping of the flash memory access routines - * on Amazon based devices. - * - * Copyright(C) 2004 peng.liu@infineon.com - * - * This code is GPLed - * - */ -// 000005:fchang 2005/6/2 Modified by Bingtao to double check if the EBU is enabled/disabled -// 506231:tc.chen 2005/06/23 increase firmware partition size form 192KB to 256KB -// 050701:linmars 2005/07/01 fix flash size wrong alignment after increase firmware partition -// 165001:henryhsu 2005/8/18 Remove the support for Intel flash because of 2.1 not enough rootfs partition size -// 165001:henryhsu 2005/9/7 Rolback to support INtel flash -// 509071:tc.chen 2005/09/07 Reduced flash writing time -// 511046:linmars 2005/11/04 change bootloader size from 128 into 64 -// 511241:linmars 2005/11/24 merge TaiChen's IRM patch - -// copyright 2005 infineon - -// copyright 2007 john crispin <blogic@openwrt.org> -// copyright 2007 felix fietkau <nbd@openwrt.org> -// copyright 2009 hauke mehrtens <hauke@hauke-m.de> - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <asm/io.h> - -#include <linux/init.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/cfi.h> -#include <linux/mutex.h> -#include <linux/platform_device.h> -#include <asm/amazon/amazon.h> - -#define AMAZON_PCI_ARB_CTL_ALT 0xb100205c -#define AMAZON_MTD_REG32( addr ) (*(volatile u32 *)(addr)) - - -static struct map_info amazon_map = { - .name = "AMAZON_FLASH", - .bankwidth = 2, -}; - -static map_word amazon_read16(struct map_info * map, unsigned long ofs) -{ - map_word temp; - ofs ^= 2; - temp.x[0] = *((__u16 *) (map->virt + ofs)); - return temp; -} - -static void amazon_write16(struct map_info *map, map_word d, unsigned long adr) -{ - adr ^= 2; - *((__u16 *) (map->virt + adr)) = d.x[0]; -} - -void amazon_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -{ - u8 *p; - u8 *to_8; - from = (unsigned long) (from + map->virt); - p = (u8 *) from; - to_8 = (u8 *) to; - while(len--){ - *to_8++ = *p++; - } -} - -void amazon_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) -{ - u8 *p = (u8*) from; - u8 *to_8; - to += (unsigned long) map->virt; - to_8 = (u8*)to; - while(len--){ - *p++ = *to_8++; - } -} - -#define UBOOT_SIZE 0x40000 - -static struct mtd_partition amazon_partitions[3] = { - { - name:"U-Boot", /* U-Boot firmware */ - offset:0x00000000, - size:UBOOT_SIZE , /* 128k */ - }, - { - name:"kernel", /* firmware */ - offset:UBOOT_SIZE, - size:0x00100000, /* 192K */ - }, - { - name:"rootfs", /* default partition */ - offset:0x00200000, - size:0x00200000, - }, -}; - -unsigned long uImage_size = 0x10000d; - -int find_uImage_size(unsigned long start_offset) -{ - unsigned long magic; - unsigned long temp; - amazon_copy_from(&amazon_map, &magic, start_offset, 4); - if (!(ntohl(magic) == 0x27051956)) { - printk(KERN_INFO "amazon_mtd: invalid magic (0x%08X) of kernel at 0x%08lx \n", ntohl(magic), start_offset); - return 0; - } - amazon_copy_from(&amazon_map, &temp, start_offset + 12, 4); - printk(KERN_INFO "amazon_mtd: kernel size is %ld \n", temp + 0x40); - return temp + 0x40; -} - -static int amazon_mtd_probe(struct platform_device *dev) -{ - unsigned long uimage_size; - struct mtd_info *mymtd = NULL; - struct mtd_partition *parts = NULL; - - *AMAZON_EBU_BUSCON0 = 0x1d7ff; - - amazon_map.read = amazon_read16; - amazon_map.write = amazon_write16; - amazon_map.copy_from = amazon_copy_from; - amazon_map.copy_to = amazon_copy_to; - - amazon_map.phys = dev->resource->start; - amazon_map.size = dev->resource->end - amazon_map.phys + 1; - amazon_map.virt = ioremap_nocache(amazon_map.phys, amazon_map.size); - - if (!amazon_map.virt) { - printk(KERN_WARNING "amazon_mtd: Failed to ioremap!\n"); - return -EIO; - } - - mymtd = (struct mtd_info *) do_map_probe("cfi_probe", &amazon_map); - if (!mymtd) { - iounmap(amazon_map.virt); - printk(KERN_WARNING "amazon_mtd: probing failed\n"); - return -ENXIO; - } - - mymtd->owner = THIS_MODULE; - parts = &amazon_partitions[0]; - - /* Some Samsung devices are containing a 16 MB flash chip with a bigger U-Boot partition. */ - if(mymtd->size == 0x01000000 && mymtd->erasesize == 0x00020000) { - printk(KERN_INFO "amazon_mtd: Found big flash chip!\n"); - amazon_partitions[0].size = 0x60000; - amazon_partitions[1].offset = 0x60000; - uimage_size = find_uImage_size(amazon_partitions[1].offset); - amazon_partitions[1].size = uimage_size; - amazon_partitions[2].offset = 0x60000 + uimage_size; - amazon_partitions[2].size = mymtd->size - amazon_partitions[2].offset - mymtd->erasesize; - } else { - printk(KERN_INFO "amazon_mtd: Found small flash chip!\n"); - uimage_size = find_uImage_size(amazon_partitions[1].offset); - amazon_partitions[1].size = uimage_size; - amazon_partitions[2].offset = UBOOT_SIZE + uimage_size; - amazon_partitions[2].size = mymtd->size - amazon_partitions[2].offset - (2 * mymtd->erasesize); - } - - mtd_device_register(mymtd, parts, 3); - - printk(KERN_INFO "amazon_mtd: added %s flash with %dMB\n", - amazon_map.name, ((int)mymtd->size) >> 20); - return 0; -} - -static struct platform_driver amazon_mtd_driver = { - .probe = amazon_mtd_probe, - .driver = { - .name = "amazon_mtd", - .owner = THIS_MODULE, - }, -}; - -static int __init amazon_mtd_init(void) -{ - int ret = platform_driver_register(&amazon_mtd_driver); - if (ret) - printk(KERN_WARNING "amazon_mtd: error registering platfom driver!\n"); - return ret; -} - -static void __exit amazon_mtd_cleanup(void) -{ - platform_driver_unregister(&amazon_mtd_driver); -} - -module_init(amazon_mtd_init); -module_exit(amazon_mtd_cleanup); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("john crispin blogic@openwrt.org"); -MODULE_DESCRIPTION("MTD map driver for AMAZON boards"); - diff --git a/target/linux/amazon/files/drivers/net/ethernet/admmod.c b/target/linux/amazon/files/drivers/net/ethernet/admmod.c deleted file mode 100644 index a11ee1d393..0000000000 --- a/target/linux/amazon/files/drivers/net/ethernet/admmod.c +++ /dev/null @@ -1,1493 +0,0 @@ -/****************************************************************************** - Copyright (c) 2004, Infineon Technologies. All rights reserved. - - No Warranty - Because the program is licensed free of charge, there is no warranty for - the program, to the extent permitted by applicable law. Except when - otherwise stated in writing the copyright holders and/or other parties - provide the program "as is" without warranty of any kind, either - expressed or implied, including, but not limited to, the implied - warranties of merchantability and fitness for a particular purpose. The - entire risk as to the quality and performance of the program is with - you. should the program prove defective, you assume the cost of all - necessary servicing, repair or correction. - - In no event unless required by applicable law or agreed to in writing - will any copyright holder, or any other party who may modify and/or - redistribute the program as permitted above, be liable to you for - damages, including any general, special, incidental or consequential - damages arising out of the use or inability to use the program - (including but not limited to loss of data or data being rendered - inaccurate or losses sustained by you or third parties or a failure of - the program to operate with any other programs), even if such holder or - other party has been advised of the possibility of such damages. - ****************************************************************************** - Module : admmod.c - Date : 2004-09-01 - Description : JoeLin - Remarks: - - Revision: - MarsLin, add to support VLAN - - *****************************************************************************/ -//000001.joelin 2005/06/02 add"ADM6996_MDC_MDIO_MODE" define, -// if define ADM6996_MDC_MDIO_MODE==> ADM6996LC and ADM6996I will be in MDIO/MDC(SMI)(16 bit) mode, -// amazon should contrl ADM6996 by MDC/MDIO pin -// if undef ADM6996_MDC_MDIO_MODE==> ADM6996 will be in EEProm(32 bit) mode, -// amazon should contrl ADM6996 by GPIO15,16,17,18 pin -/* 507281:linmars 2005/07/28 support MDIO/EEPROM config mode */ -/* 509201:linmars remove driver testing codes */ - -#include <linux/version.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/proc_fs.h> -#include <linux/delay.h> -#include <asm/uaccess.h> -#include <linux/init.h> -#include <linux/ioctl.h> -#include <asm/atomic.h> -#include <asm-mips/amazon/amazon.h> -#include <asm-mips/amazon/adm6996.h> -//#include <linux/amazon/adm6996.h> - - -unsigned int ifx_sw_conf[ADM_SW_MAX_PORT_NUM+1] = \ - {ADM_SW_PORT0_CONF, ADM_SW_PORT1_CONF, ADM_SW_PORT2_CONF, \ - ADM_SW_PORT3_CONF, ADM_SW_PORT4_CONF, ADM_SW_PORT5_CONF}; -unsigned int ifx_sw_bits[8] = \ - {0x1, 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff}; -unsigned int ifx_sw_vlan_port[6] = {0, 2, 4, 6, 7, 8}; -//050613:fchang -/* 507281:linmars start */ -#ifdef CONFIG_SWITCH_ADM6996_MDIO -#define ADM6996_MDC_MDIO_MODE 1 //000001.joelin -#else -#undef ADM6996_MDC_MDIO_MODE -#endif -/* 507281:linmars end */ -#define adm6996i 0 -#define adm6996lc 1 -#define adm6996l 2 -unsigned int adm6996_mode=adm6996i; -/* - initialize GPIO pins. - output mode, low -*/ -void ifx_gpio_init(void) -{ - //GPIO16,17,18 direction:output - //GPIO16,17,18 output 0 - - AMAZON_SW_REG(AMAZON_GPIO_P1_DIR) |= (GPIO_MDIO|GPIO_MDCS|GPIO_MDC); - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT) =AMAZON_SW_REG(AMAZON_GPIO_P1_IN)& ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC); - -} - -/* read one bit from mdio port */ -int ifx_sw_mdio_readbit(void) -{ - //int val; - - //val = (AMAZON_SW_REG(GPIO_conf0_REG) & GPIO0_INPUT_MASK) >> 8; - //return val; - //GPIO16 - return AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&1; -} - -/* - MDIO mode selection - 1 -> output - 0 -> input - - switch input/output mode of GPIO 0 -*/ -void ifx_mdio_mode(int mode) -{ -// AMAZON_SW_REG(GPIO_conf0_REG) = mode ? GPIO_ENABLEBITS : -// ((GPIO_ENABLEBITS | MDIO_INPUT) & ~MDIO_OUTPUT_EN); - mode?(AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)|=GPIO_MDIO): - (AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)&=~GPIO_MDIO); - /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_DIR); - mode?(r|=GPIO_MDIO):(r&=~GPIO_MDIO); - AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)=r;*/ -} - -void ifx_mdc_hi(void) -{ - //GPIO_SET_HI(GPIO_MDC); - //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDC; - /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT); - r|=GPIO_MDC; - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/ - - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDC; -} - -void ifx_mdio_hi(void) -{ - //GPIO_SET_HI(GPIO_MDIO); - //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDIO; - /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT); - r|=GPIO_MDIO; - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/ - - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDIO; -} - -void ifx_mdcs_hi(void) -{ - //GPIO_SET_HI(GPIO_MDCS); - //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDCS; - /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT); - r|=GPIO_MDCS; - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/ - - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDCS; -} - -void ifx_mdc_lo(void) -{ - //GPIO_SET_LOW(GPIO_MDC); - //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDC; - /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT); - r&=~GPIO_MDC; - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/ - - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDC); -} - -void ifx_mdio_lo(void) -{ - //GPIO_SET_LOW(GPIO_MDIO); - //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDIO; - /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT); - r&=~GPIO_MDIO; - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/ - - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDIO); -} - -void ifx_mdcs_lo(void) -{ - //GPIO_SET_LOW(GPIO_MDCS); - //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDCS; - /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT); - r&=~GPIO_MDCS; - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/ - - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDCS); -} - -/* - mdc pulse - 0 -> 1 -> 0 -*/ -static void ifx_sw_mdc_pulse(void) -{ - ifx_mdc_lo(); - udelay(ADM_SW_MDC_DOWN_DELAY); - ifx_mdc_hi(); - udelay(ADM_SW_MDC_UP_DELAY); - ifx_mdc_lo(); -} - -/* - mdc toggle - 1 -> 0 -*/ -static void ifx_sw_mdc_toggle(void) -{ - ifx_mdc_hi(); - udelay(ADM_SW_MDC_UP_DELAY); - ifx_mdc_lo(); - udelay(ADM_SW_MDC_DOWN_DELAY); -} - -/* - enable eeprom write - For ATC 93C66 type EEPROM; accessing ADM6996 internal EEPROM type registers -*/ -static void ifx_sw_eeprom_write_enable(void) -{ - unsigned int op; - - ifx_mdcs_lo(); - ifx_mdc_lo(); - ifx_mdio_hi(); - udelay(ADM_SW_CS_DELAY); - /* enable chip select */ - ifx_mdcs_hi(); - udelay(ADM_SW_CS_DELAY); - /* start bit */ - ifx_mdio_hi(); - ifx_sw_mdc_pulse(); - - /* eeprom write enable */ - op = ADM_SW_BIT_MASK_4; - while (op) - { - if (op & ADM_SW_EEPROM_WRITE_ENABLE) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 3); - while (op) - { - ifx_mdio_lo(); - ifx_sw_mdc_pulse(); - op >>= 1; - } - /* disable chip select */ - ifx_mdcs_lo(); - udelay(ADM_SW_CS_DELAY); - ifx_sw_mdc_pulse(); -} - -/* - disable eeprom write -*/ -static void ifx_sw_eeprom_write_disable(void) -{ - unsigned int op; - - ifx_mdcs_lo(); - ifx_mdc_lo(); - ifx_mdio_hi(); - udelay(ADM_SW_CS_DELAY); - /* enable chip select */ - ifx_mdcs_hi(); - udelay(ADM_SW_CS_DELAY); - - /* start bit */ - ifx_mdio_hi(); - ifx_sw_mdc_pulse(); - /* eeprom write disable */ - op = ADM_SW_BIT_MASK_4; - while (op) - { - if (op & ADM_SW_EEPROM_WRITE_DISABLE) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 3); - while (op) - { - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - /* disable chip select */ - ifx_mdcs_lo(); - udelay(ADM_SW_CS_DELAY); - ifx_sw_mdc_pulse(); -} - -/* - read registers from ADM6996 - serial registers start at 0x200 (addr bit 9 = 1b) - EEPROM registers -> 16bits; Serial registers -> 32bits -*/ -#ifdef ADM6996_MDC_MDIO_MODE //smi mode//000001.joelin -static int ifx_sw_read_adm6996i_smi(unsigned int addr, unsigned int *dat) -{ - addr=(addr<<16)&0x3ff0000; - AMAZON_SW_REG(AMAZON_SW_MDIO_ACC) =(0xC0000000|addr); - while ((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x80000000){}; - *dat=((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x0FFFF); - return 0; -} -#endif - -static int ifx_sw_read_adm6996i(unsigned int addr, unsigned int *dat) -{ - unsigned int op; - - ifx_gpio_init(); - - ifx_mdcs_hi(); - udelay(ADM_SW_CS_DELAY); - - ifx_mdcs_lo(); - ifx_mdc_lo(); - ifx_mdio_lo(); - - udelay(ADM_SW_CS_DELAY); - - /* preamble, 32 bit 1 */ - ifx_mdio_hi(); - op = ADM_SW_BIT_MASK_32; - while (op) - { - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* command start (01b) */ - op = ADM_SW_BIT_MASK_2; - while (op) - { - if (op & ADM_SW_SMI_START) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* read command (10b) */ - op = ADM_SW_BIT_MASK_2; - while (op) - { - if (op & ADM_SW_SMI_READ) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* send address A9 ~ A0 */ - op = ADM_SW_BIT_MASK_10; - while (op) - { - if (op & addr) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* turnaround bits */ - op = ADM_SW_BIT_MASK_2; - ifx_mdio_hi(); - while (op) - { - ifx_sw_mdc_pulse(); - op >>= 1; - } - - udelay(ADM_SW_MDC_DOWN_DELAY); - - /* set MDIO pin to input mode */ - ifx_mdio_mode(ADM_SW_MDIO_INPUT); - - /* start read data */ - *dat = 0; -//adm6996i op = ADM_SW_BIT_MASK_32; - op = ADM_SW_BIT_MASK_16;//adm6996i - while (op) - { - *dat <<= 1; - if (ifx_sw_mdio_readbit()) *dat |= 1; - ifx_sw_mdc_toggle(); - - op >>= 1; - } - - /* set MDIO to output mode */ - ifx_mdio_mode(ADM_SW_MDIO_OUTPUT); - - /* dummy clock */ - op = ADM_SW_BIT_MASK_4; - ifx_mdio_lo(); - while(op) - { - ifx_sw_mdc_pulse(); - op >>= 1; - } - - ifx_mdc_lo(); - ifx_mdio_lo(); - ifx_mdcs_hi(); - - /* EEPROM registers */ -//adm6996i if (!(addr & 0x200)) -//adm6996i { -//adm6996i if (addr % 2) -//adm6996i *dat >>= 16; -//adm6996i else -//adm6996i *dat &= 0xffff; -//adm6996i } - - return 0; -} -//adm6996 -static int ifx_sw_read_adm6996l(unsigned int addr, unsigned int *dat) -{ - unsigned int op; - - ifx_gpio_init(); - - ifx_mdcs_hi(); - udelay(ADM_SW_CS_DELAY); - - ifx_mdcs_lo(); - ifx_mdc_lo(); - ifx_mdio_lo(); - - udelay(ADM_SW_CS_DELAY); - - /* preamble, 32 bit 1 */ - ifx_mdio_hi(); - op = ADM_SW_BIT_MASK_32; - while (op) - { - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* command start (01b) */ - op = ADM_SW_BIT_MASK_2; - while (op) - { - if (op & ADM_SW_SMI_START) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* read command (10b) */ - op = ADM_SW_BIT_MASK_2; - while (op) - { - if (op & ADM_SW_SMI_READ) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* send address A9 ~ A0 */ - op = ADM_SW_BIT_MASK_10; - while (op) - { - if (op & addr) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* turnaround bits */ - op = ADM_SW_BIT_MASK_2; - ifx_mdio_hi(); - while (op) - { - ifx_sw_mdc_pulse(); - op >>= 1; - } - - udelay(ADM_SW_MDC_DOWN_DELAY); - - /* set MDIO pin to input mode */ - ifx_mdio_mode(ADM_SW_MDIO_INPUT); - - /* start read data */ - *dat = 0; - op = ADM_SW_BIT_MASK_32; - while (op) - { - *dat <<= 1; - if (ifx_sw_mdio_readbit()) *dat |= 1; - ifx_sw_mdc_toggle(); - - op >>= 1; - } - - /* set MDIO to output mode */ - ifx_mdio_mode(ADM_SW_MDIO_OUTPUT); - - /* dummy clock */ - op = ADM_SW_BIT_MASK_4; - ifx_mdio_lo(); - while(op) - { - ifx_sw_mdc_pulse(); - op >>= 1; - } - - ifx_mdc_lo(); - ifx_mdio_lo(); - ifx_mdcs_hi(); - - /* EEPROM registers */ - if (!(addr & 0x200)) - { - if (addr % 2) - *dat >>= 16; - else - *dat &= 0xffff; - } - - return 0; -} - -static int ifx_sw_read(unsigned int addr, unsigned int *dat) -{ -#ifdef ADM6996_MDC_MDIO_MODE //smi mode ////000001.joelin - ifx_sw_read_adm6996i_smi(addr,dat); -#else - if (adm6996_mode==adm6996i) ifx_sw_read_adm6996i(addr,dat); - else ifx_sw_read_adm6996l(addr,dat); -#endif - return 0; - -} - -/* - write register to ADM6996 eeprom registers -*/ -//for adm6996i -start -#ifdef ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin -static int ifx_sw_write_adm6996i_smi(unsigned int addr, unsigned int dat) -{ - - AMAZON_SW_REG(AMAZON_SW_MDIO_ACC) = ((addr<<16)&0x3ff0000)|dat|0x80000000; - while ((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x80000000){}; - - return 0; - -} -#endif //ADM6996_MDC_MDIO_MODE //000001.joelin - -static int ifx_sw_write_adm6996i(unsigned int addr, unsigned int dat) -{ - unsigned int op; - - ifx_gpio_init(); - - ifx_mdcs_hi(); - udelay(ADM_SW_CS_DELAY); - - ifx_mdcs_lo(); - ifx_mdc_lo(); - ifx_mdio_lo(); - - udelay(ADM_SW_CS_DELAY); - - /* preamble, 32 bit 1 */ - ifx_mdio_hi(); - op = ADM_SW_BIT_MASK_32; - while (op) - { - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* command start (01b) */ - op = ADM_SW_BIT_MASK_2; - while (op) - { - if (op & ADM_SW_SMI_START) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* write command (01b) */ - op = ADM_SW_BIT_MASK_2; - while (op) - { - if (op & ADM_SW_SMI_WRITE) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* send address A9 ~ A0 */ - op = ADM_SW_BIT_MASK_10; - while (op) - { - if (op & addr) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* turnaround bits */ - op = ADM_SW_BIT_MASK_2; - ifx_mdio_hi(); - while (op) - { - ifx_sw_mdc_pulse(); - op >>= 1; - } - - udelay(ADM_SW_MDC_DOWN_DELAY); - - /* set MDIO pin to output mode */ - ifx_mdio_mode(ADM_SW_MDIO_OUTPUT); - - - /* start write data */ - op = ADM_SW_BIT_MASK_16; - while (op) - { - if (op & dat) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_toggle(); - op >>= 1; - } - - // /* set MDIO to output mode */ - // ifx_mdio_mode(ADM_SW_MDIO_OUTPUT); - - /* dummy clock */ - op = ADM_SW_BIT_MASK_4; - ifx_mdio_lo(); - while(op) - { - ifx_sw_mdc_pulse(); - op >>= 1; - } - - ifx_mdc_lo(); - ifx_mdio_lo(); - ifx_mdcs_hi(); - - /* EEPROM registers */ -//adm6996i if (!(addr & 0x200)) -//adm6996i { -//adm6996i if (addr % 2) -//adm6996i *dat >>= 16; -//adm6996i else -//adm6996i *dat &= 0xffff; -//adm6996i } - - return 0; -} -//for adm6996i-end -static int ifx_sw_write_adm6996l(unsigned int addr, unsigned int dat) -{ - unsigned int op; - - ifx_gpio_init(); - - /* enable write */ - ifx_sw_eeprom_write_enable(); - - /* chip select */ - ifx_mdcs_hi(); - udelay(ADM_SW_CS_DELAY); - - /* issue write command */ - /* start bit */ - ifx_mdio_hi(); - ifx_sw_mdc_pulse(); - - /* EEPROM write command */ - op = ADM_SW_BIT_MASK_2; - while (op) - { - if (op & ADM_SW_EEPROM_WRITE) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* send address A7 ~ A0 */ - op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 1); - - while (op) - { - if (op & addr) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_toggle(); - op >>= 1; - } - - /* start write data */ - op = ADM_SW_BIT_MASK_16; - while (op) - { - if (op & dat) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_toggle(); - op >>= 1; - } - - /* disable cs & wait 1 clock */ - ifx_mdcs_lo(); - udelay(ADM_SW_CS_DELAY); - ifx_sw_mdc_toggle(); - - ifx_sw_eeprom_write_disable(); - - return 0; -} - -static int ifx_sw_write(unsigned int addr, unsigned int dat) -{ -#ifdef ADM6996_MDC_MDIO_MODE //smi mode ////000001.joelin - ifx_sw_write_adm6996i_smi(addr,dat); -#else //000001.joelin - if (adm6996_mode==adm6996i) ifx_sw_write_adm6996i(addr,dat); - else ifx_sw_write_adm6996l(addr,dat); -#endif //000001.joelin - return 0; -} - -/* - do switch PHY reset -*/ -int ifx_sw_reset(void) -{ - /* reset PHY */ - ifx_sw_write(ADM_SW_PHY_RESET, 0); - - return 0; -} - -/* 509201:linmars start */ -#if 0 -/* - check port status -*/ -int ifx_check_port_status(int port) -{ - unsigned int val; - - if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM)) - { - ifx_printf(("error on port number (%d)!!\n", port)); - return -1; - } - - ifx_sw_read(ifx_sw_conf[port], &val); - if (ifx_sw_conf[port]%2) val >>= 16; - /* only 16bits are effective */ - val &= 0xFFFF; - - ifx_printf(("Port %d status (%.8x): \n", port, val)); - - if (val & ADM_SW_PORT_FLOWCTL) - ifx_printf(("\t802.3x flow control supported!\n")); - else - ifx_printf(("\t802.3x flow control not supported!\n")); - - if (val & ADM_SW_PORT_AN) - ifx_printf(("\tAuto negotiation ON!\n")); - else - ifx_printf(("\tAuto negotiation OFF!\n")); - - if (val & ADM_SW_PORT_100M) - ifx_printf(("\tLink at 100M!\n")); - else - ifx_printf(("\tLink at 10M!\n")); - - if (val & ADM_SW_PORT_FULL) - ifx_printf(("\tFull duplex!\n")); - else - ifx_printf(("\tHalf duplex!\n")); - - if (val & ADM_SW_PORT_DISABLE) - ifx_printf(("\tPort disabled!\n")); - else - ifx_printf(("\tPort enabled!\n")); - - if (val & ADM_SW_PORT_TOS) - ifx_printf(("\tTOS enabled!\n")); - else - ifx_printf(("\tTOS disabled!\n")); - - if (val & ADM_SW_PORT_PPRI) - ifx_printf(("\tPort priority first!\n")); - else - ifx_printf(("\tVLAN or TOS priority first!\n")); - - if (val & ADM_SW_PORT_MDIX) - ifx_printf(("\tAuto MDIX!\n")); - else - ifx_printf(("\tNo auto MDIX\n")); - - ifx_printf(("\tPVID: %d\n", \ - ((val >> ADM_SW_PORT_PVID_SHIFT)&ifx_sw_bits[ADM_SW_PORT_PVID_BITS]))); - - return 0; -} -/* - initialize a VLAN - clear all VLAN bits -*/ -int ifx_sw_vlan_init(int vlanid) -{ - ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, 0); - - return 0; -} - -/* - add a port to certain vlan -*/ -int ifx_sw_vlan_add(int port, int vlanid) -{ - int reg = 0; - - if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM) || (vlanid < 0) || - (vlanid > ADM_SW_MAX_VLAN_NUM)) - { - ifx_printf(("Port number or VLAN number ERROR!!\n")); - return -1; - } - ifx_sw_read(ADM_SW_VLAN0_CONF + vlanid, ®); - reg |= (1 << ifx_sw_vlan_port[port]); - ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, reg); - - return 0; -} - -/* - delete a given port from certain vlan -*/ -int ifx_sw_vlan_del(int port, int vlanid) -{ - unsigned int reg = 0; - - if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM) || (vlanid < 0) || (vlanid > ADM_SW_MAX_VLAN_NUM)) - { - ifx_printf(("Port number or VLAN number ERROR!!\n")); - return -1; - } - ifx_sw_read(ADM_SW_VLAN0_CONF + vlanid, ®); - reg &= ~(1 << ifx_sw_vlan_port[port]); - ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, reg); - - return 0; -} - -/* - default VLAN setting - - port 0~3 as untag port and PVID = 1 - VLAN1: port 0~3 and port 5 (MII) -*/ -static int ifx_sw_init(void) -{ - ifx_printf(("Setting default ADM6996 registers... \n")); - - /* MAC clone, 802.1q based VLAN */ - ifx_sw_write(ADM_SW_VLAN_MODE, 0xff30); - /* auto MDIX, PVID=1, untag */ - ifx_sw_write(ADM_SW_PORT0_CONF, 0x840f); - ifx_sw_write(ADM_SW_PORT1_CONF, 0x840f); - ifx_sw_write(ADM_SW_PORT2_CONF, 0x840f); - ifx_sw_write(ADM_SW_PORT3_CONF, 0x840f); - /* auto MDIX, PVID=2, untag */ - ifx_sw_write(ADM_SW_PORT5_CONF, 0x880f); - /* port 0~3 & 5 as VLAN1 */ - ifx_sw_write(ADM_SW_VLAN0_CONF+1, 0x0155); - - return 0; -} -#endif -/* 509201:linmars end */ - -int adm_open(struct inode *node, struct file *filp) -{ - return 0; -} - -ssize_t adm_read(struct file *filep, char *buf, size_t count, loff_t *ppos) -{ - return count; -} - -ssize_t adm_write(struct file *filep, const char *buf, size_t count, loff_t *ppos) -{ - return count; -} - -/* close */ -int adm_release(struct inode *inode, struct file *filp) -{ - return 0; -} - -/* IOCTL function */ - -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36)) -static long adm_ioctl(struct file *filp, unsigned int cmd, unsigned long args) -#else -static int adm_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long args) -#endif -{ - PREGRW uREGRW; - unsigned int rtval; - unsigned int val; //6996i - unsigned int control[6] ; //6996i - unsigned int status[6] ; //6996i - - PMACENTRY mMACENTRY;//adm6996i - PPROTOCOLFILTER uPROTOCOLFILTER ;///adm6996i - - if (_IOC_TYPE(cmd) != ADM_MAGIC) - { - printk("adm_ioctl: IOC_TYPE(%x) != ADM_MAGIC(%x)! \n", _IOC_TYPE(cmd), ADM_MAGIC); - return (-EINVAL); - } - - if(_IOC_NR(cmd) >= KEY_IOCTL_MAX_KEY) - { - printk(KERN_WARNING "adm_ioctl: IOC_NR(%x) invalid! \n", _IOC_NR(cmd)); - return (-EINVAL); - } - - switch (cmd) - { - case ADM_IOCTL_REGRW: - { - uREGRW = (PREGRW)kmalloc(sizeof(REGRW), GFP_KERNEL); - rtval = copy_from_user(uREGRW, (PREGRW)args, sizeof(REGRW)); - if (rtval != 0) - { - printk("ADM_IOCTL_REGRW: copy from user FAILED!! \n"); - return (-EFAULT); - } - - switch(uREGRW->mode) - { - case REG_READ: - uREGRW->value = 0x12345678;//inl(uREGRW->addr); - copy_to_user((PREGRW)args, uREGRW, sizeof(REGRW)); - break; - case REG_WRITE: - //outl(uREGRW->value, uREGRW->addr); - break; - - default: - printk("No such Register Read/Write function!! \n"); - return (-EFAULT); - } - kfree(uREGRW); - break; - } - - case ADM_SW_IOCTL_REGRW: - { - unsigned int val = 0xff; - - uREGRW = (PREGRW)kmalloc(sizeof(REGRW), GFP_KERNEL); - rtval = copy_from_user(uREGRW, (PREGRW)args, sizeof(REGRW)); - if (rtval != 0) - { - printk("ADM_IOCTL_REGRW: copy from user FAILED!! \n"); - return (-EFAULT); - } - - switch(uREGRW->mode) - { - case REG_READ: - ifx_sw_read(uREGRW->addr, &val); - uREGRW->value = val; - copy_to_user((PREGRW)args, uREGRW, sizeof(REGRW)); - break; - - case REG_WRITE: - ifx_sw_write(uREGRW->addr, uREGRW->value); - break; - default: - printk("No such Register Read/Write function!! \n"); - return (-EFAULT); - } - kfree(uREGRW); - break; - } -/* 509201:linmars start */ -#if 0 - case ADM_SW_IOCTL_PORTSTS: - for (rtval = 0; rtval < ADM_SW_MAX_PORT_NUM+1; rtval++) - ifx_check_port_status(rtval); - break; - case ADM_SW_IOCTL_INIT: - ifx_sw_init(); - break; -#endif -/* 509201:linmars end */ -//adm6996i - case ADM_SW_IOCTL_MACENTRY_ADD: - case ADM_SW_IOCTL_MACENTRY_DEL: - case ADM_SW_IOCTL_MACENTRY_GET_INIT: - case ADM_SW_IOCTL_MACENTRY_GET_MORE: - - - mMACENTRY = (PMACENTRY)kmalloc(sizeof(MACENTRY), GFP_KERNEL); - rtval = copy_from_user(mMACENTRY, (PMACENTRY)args, sizeof(MACENTRY)); - if (rtval != 0) - { - printk("ADM_SW_IOCTL_MACENTRY: copy from user FAILED!! \n"); - return (-EFAULT); - } - control[0]=(mMACENTRY->mac_addr[1]<<8)+mMACENTRY->mac_addr[0] ; - control[1]=(mMACENTRY->mac_addr[3]<<8)+mMACENTRY->mac_addr[2] ; - control[2]=(mMACENTRY->mac_addr[5]<<8)+mMACENTRY->mac_addr[4] ; - control[3]=(mMACENTRY->fid&0xf)+((mMACENTRY->portmap&0x3f)<<4); - if (((mMACENTRY->info_type)&0x01)) control[4]=(mMACENTRY->ctrl.info_ctrl)+0x1000; //static ,info control - else control[4]=((mMACENTRY->ctrl.age_timer)&0xff);//not static ,agetimer - if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) { - //initial the pointer to the first address - val=0x8000;//busy ,status5[15] - while(val&0x8000){ //check busy ? - ifx_sw_read(0x125, &val); - } - control[5]=0x030;//initial the first address - ifx_sw_write(0x11f,control[5]); - - - val=0x8000;//busy ,status5[15] - while(val&0x8000){ //check busy ? - ifx_sw_read(0x125, &val); - } - - } //if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) - if (cmd==ADM_SW_IOCTL_MACENTRY_ADD) control[5]=0x07;//create a new address - else if (cmd==ADM_SW_IOCTL_MACENTRY_DEL) control[5]=0x01f;//erased an existed address - else if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) - control[5]=0x02c;//search by the mac address field - - val=0x8000;//busy ,status5[15] - while(val&0x8000){ //check busy ? - ifx_sw_read(0x125, &val); - } - ifx_sw_write(0x11a,control[0]); - ifx_sw_write(0x11b,control[1]); - ifx_sw_write(0x11c,control[2]); - ifx_sw_write(0x11d,control[3]); - ifx_sw_write(0x11e,control[4]); - ifx_sw_write(0x11f,control[5]); - val=0x8000;//busy ,status5[15] - while(val&0x8000){ //check busy ? - ifx_sw_read(0x125, &val); - } - val=((val&0x7000)>>12);//result ,status5[14:12] - mMACENTRY->result=val; - - if (!val) { - printk(" Command OK!! \n"); - if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) { - ifx_sw_read(0x120,&(status[0])); - ifx_sw_read(0x121,&(status[1])); - ifx_sw_read(0x122,&(status[2])); - ifx_sw_read(0x123,&(status[3])); - ifx_sw_read(0x124,&(status[4])); - ifx_sw_read(0x125,&(status[5])); - - - mMACENTRY->mac_addr[0]=(status[0]&0x00ff) ; - mMACENTRY->mac_addr[1]=(status[0]&0xff00)>>8 ; - mMACENTRY->mac_addr[2]=(status[1]&0x00ff) ; - mMACENTRY->mac_addr[3]=(status[1]&0xff00)>>8 ; - mMACENTRY->mac_addr[4]=(status[2]&0x00ff) ; - mMACENTRY->mac_addr[5]=(status[2]&0xff00)>>8 ; - mMACENTRY->fid=(status[3]&0xf); - mMACENTRY->portmap=((status[3]>>4)&0x3f); - if (status[5]&0x2) {//static info_ctrl //status5[1]???? - mMACENTRY->ctrl.info_ctrl=(status[4]&0x00ff); - mMACENTRY->info_type=1; - } - else {//not static age_timer - mMACENTRY->ctrl.age_timer=(status[4]&0x00ff); - mMACENTRY->info_type=0; - } -//status5[13]???? mMACENTRY->occupy=(status[5]&0x02)>>1;//status5[1] - mMACENTRY->occupy=(status[5]&0x02000)>>13;//status5[13] ??? - mMACENTRY->bad=(status[5]&0x04)>>2;//status5[2] - }//if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) - - } - else if (val==0x001) - printk(" All Entry Used!! \n"); - else if (val==0x002) - printk(" Entry Not Found!! \n"); - else if (val==0x003) - printk(" Try Next Entry!! \n"); - else if (val==0x005) - printk(" Command Error!! \n"); - else - printk(" UnKnown Error!! \n"); - - copy_to_user((PMACENTRY)args, mMACENTRY,sizeof(MACENTRY)); - - break; - - case ADM_SW_IOCTL_FILTER_ADD: - case ADM_SW_IOCTL_FILTER_DEL: - case ADM_SW_IOCTL_FILTER_GET: - - uPROTOCOLFILTER = (PPROTOCOLFILTER)kmalloc(sizeof(PROTOCOLFILTER), GFP_KERNEL); - rtval = copy_from_user(uPROTOCOLFILTER, (PPROTOCOLFILTER)args, sizeof(PROTOCOLFILTER)); - if (rtval != 0) - { - printk("ADM_SW_IOCTL_FILTER_ADD: copy from user FAILED!! \n"); - return (-EFAULT); - } - - if(cmd==ADM_SW_IOCTL_FILTER_DEL) { //delete filter - uPROTOCOLFILTER->ip_p=00; //delet filter - uPROTOCOLFILTER->action=00; //delete filter - } //delete filter - - ifx_sw_read(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), &val);//rx68~rx6b,protocol filter0~7 - - if (((uPROTOCOLFILTER->protocol_filter_num)%2)==00){ - if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= val&0x00ff;//get filter ip_p - else val=(val&0xff00)|(uPROTOCOLFILTER->ip_p);//set filter ip_p - } - else { - if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= (val>>8);//get filter ip_p - else val=(val&0x00ff)|((uPROTOCOLFILTER->ip_p)<<8);//set filter ip_p - } - if(cmd!=ADM_SW_IOCTL_FILTER_GET) ifx_sw_write(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), val);//write rx68~rx6b,protocol filter0~7 - - ifx_sw_read(0x95, &val); //protocol filter action - if(cmd==ADM_SW_IOCTL_FILTER_GET) { - uPROTOCOLFILTER->action= ((val>>(uPROTOCOLFILTER->protocol_filter_num*2))&0x3);//get filter action - copy_to_user((PPROTOCOLFILTER)args, uPROTOCOLFILTER, sizeof(PROTOCOLFILTER)); - - } - else { - val=(val&(~(0x03<<(uPROTOCOLFILTER->protocol_filter_num*2))))|(((uPROTOCOLFILTER->action)&0x03)<<(uPROTOCOLFILTER->protocol_filter_num*2)); - // printk("%d----\n",val); - ifx_sw_write(0x95, val); //write protocol filter action - } - - break; -//adm6996i - - /* others */ - default: - return -EFAULT; - } - /* end of switch */ - return 0; -} - -/* Santosh: handle IGMP protocol filter ADD/DEL/GET */ -int adm_process_protocol_filter_request (unsigned int cmd, PPROTOCOLFILTER uPROTOCOLFILTER) -{ - unsigned int val; //6996i - - if(cmd==ADM_SW_IOCTL_FILTER_DEL) { //delete filter - uPROTOCOLFILTER->ip_p=00; //delet filter - uPROTOCOLFILTER->action=00; //delete filter - } //delete filter - - ifx_sw_read(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), &val);//rx68~rx6b,protocol filter0~7 - - if (((uPROTOCOLFILTER->protocol_filter_num)%2)==00){ - if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= val&0x00ff;//get filter ip_p - else val=(val&0xff00)|(uPROTOCOLFILTER->ip_p);//set filter ip_p - } - else { - if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= (val>>8);//get filter ip_p - else val=(val&0x00ff)|((uPROTOCOLFILTER->ip_p)<<8);//set filter ip_p - } - if(cmd!=ADM_SW_IOCTL_FILTER_GET) ifx_sw_write(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), val);//write rx68~rx6b,protocol filter0~7 - - ifx_sw_read(0x95, &val); //protocol filter action - if(cmd==ADM_SW_IOCTL_FILTER_GET) { - uPROTOCOLFILTER->action= ((val>>(uPROTOCOLFILTER->protocol_filter_num*2))&0x3);//get filter action - } - else { - val=(val&(~(0x03<<(uPROTOCOLFILTER->protocol_filter_num*2))))|(((uPROTOCOLFILTER->action)&0x03)<<(uPROTOCOLFILTER->protocol_filter_num*2)); - ifx_sw_write(0x95, val); //write protocol filter action - } - - return 0; -} - - -/* Santosh: function for MAC ENTRY ADD/DEL/GET */ - -int adm_process_mac_table_request (unsigned int cmd, PMACENTRY mMACENTRY) -{ - unsigned int val; //6996i - unsigned int control[6] ; //6996i - unsigned int status[6] ; //6996i - - // printk ("adm_process_mac_table_request: enter\n"); - - control[0]=(mMACENTRY->mac_addr[1]<<8)+mMACENTRY->mac_addr[0] ; - control[1]=(mMACENTRY->mac_addr[3]<<8)+mMACENTRY->mac_addr[2] ; - control[2]=(mMACENTRY->mac_addr[5]<<8)+mMACENTRY->mac_addr[4] ; - control[3]=(mMACENTRY->fid&0xf)+((mMACENTRY->portmap&0x3f)<<4); - - if (((mMACENTRY->info_type)&0x01)) control[4]=(mMACENTRY->ctrl.info_ctrl)+0x1000; //static ,info control - else control[4]=((mMACENTRY->ctrl.age_timer)&0xff);//not static ,agetimer - if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) { - //initial the pointer to the first address - val=0x8000;//busy ,status5[15] - while(val&0x8000){ //check busy ? - ifx_sw_read(0x125, &val); - } - control[5]=0x030;//initial the first address - ifx_sw_write(0x11f,control[5]); - - - val=0x8000;//busy ,status5[15] - while(val&0x8000){ //check busy ? - ifx_sw_read(0x125, &val); - } - - } //if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) - if (cmd==ADM_SW_IOCTL_MACENTRY_ADD) control[5]=0x07;//create a new address - else if (cmd==ADM_SW_IOCTL_MACENTRY_DEL) control[5]=0x01f;//erased an existed address - else if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) - control[5]=0x02c;//search by the mac address field - - val=0x8000;//busy ,status5[15] - while(val&0x8000){ //check busy ? - ifx_sw_read(0x125, &val); - } - ifx_sw_write(0x11a,control[0]); - ifx_sw_write(0x11b,control[1]); - ifx_sw_write(0x11c,control[2]); - ifx_sw_write(0x11d,control[3]); - ifx_sw_write(0x11e,control[4]); - ifx_sw_write(0x11f,control[5]); - val=0x8000;//busy ,status5[15] - while(val&0x8000){ //check busy ? - ifx_sw_read(0x125, &val); - } - val=((val&0x7000)>>12);//result ,status5[14:12] - mMACENTRY->result=val; - - if (!val) { - printk(" Command OK!! \n"); - if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) { - ifx_sw_read(0x120,&(status[0])); - ifx_sw_read(0x121,&(status[1])); - ifx_sw_read(0x122,&(status[2])); - ifx_sw_read(0x123,&(status[3])); - ifx_sw_read(0x124,&(status[4])); - ifx_sw_read(0x125,&(status[5])); - - - mMACENTRY->mac_addr[0]=(status[0]&0x00ff) ; - mMACENTRY->mac_addr[1]=(status[0]&0xff00)>>8 ; - mMACENTRY->mac_addr[2]=(status[1]&0x00ff) ; - mMACENTRY->mac_addr[3]=(status[1]&0xff00)>>8 ; - mMACENTRY->mac_addr[4]=(status[2]&0x00ff) ; - mMACENTRY->mac_addr[5]=(status[2]&0xff00)>>8 ; - mMACENTRY->fid=(status[3]&0xf); - mMACENTRY->portmap=((status[3]>>4)&0x3f); - if (status[5]&0x2) {//static info_ctrl //status5[1]???? - mMACENTRY->ctrl.info_ctrl=(status[4]&0x00ff); - mMACENTRY->info_type=1; - } - else {//not static age_timer - mMACENTRY->ctrl.age_timer=(status[4]&0x00ff); - mMACENTRY->info_type=0; - } -//status5[13]???? mMACENTRY->occupy=(status[5]&0x02)>>1;//status5[1] - mMACENTRY->occupy=(status[5]&0x02000)>>13;//status5[13] ??? - mMACENTRY->bad=(status[5]&0x04)>>2;//status5[2] - }//if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) - - } - else if (val==0x001) - printk(" All Entry Used!! \n"); - else if (val==0x002) - printk(" Entry Not Found!! \n"); - else if (val==0x003) - printk(" Try Next Entry!! \n"); - else if (val==0x005) - printk(" Command Error!! \n"); - else - printk(" UnKnown Error!! \n"); - - // printk ("adm_process_mac_table_request: Exit\n"); - return 0; -} - -/* Santosh: End of function for MAC ENTRY ADD/DEL*/ -struct file_operations adm_ops = -{ - read: adm_read, - write: adm_write, - open: adm_open, - release: adm_release, -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36)) - unlocked_ioctl: adm_ioctl -#else - ioctl: adm_ioctl -#endif -}; - -int adm_proc(char *buf, char **start, off_t offset, int count, int *eof, void *data) -{ - int len = 0; - - len += sprintf(buf+len, " ************ Registers ************ \n"); - *eof = 1; - return len; -} - -int __init init_adm6996_module(void) -{ - unsigned int val = 000; - unsigned int val1 = 000; - - printk("Loading ADM6996 driver... \n"); - - /* if running on adm5120 */ - /* set GPIO 0~2 as adm6996 control pins */ - //outl(0x003f3f00, 0x12000028); - /* enable switch port 5 (MII) as RMII mode (5120MAC <-> 6996MAC) */ - //outl(0x18a, 0x12000030); - /* group adm5120 port 1 ~ 5 as VLAN0, port 5 & 6(CPU) as VLAN1 */ - //outl(0x417e, 0x12000040); - /* end adm5120 fixup */ -#ifdef ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin - register_chrdev(69, "adm6996", &adm_ops); - AMAZON_SW_REG(AMAZON_SW_MDIO_CFG) = 0x27be; - AMAZON_SW_REG(AMAZON_SW_EPHY) = 0xfc; - adm6996_mode=adm6996i; - ifx_sw_read(0xa0, &val); - ifx_sw_read(0xa1, &val1); - val=((val1&0x0f)<<16)|val; - printk ("\nADM6996 SMI Mode-"); - printk ("Chip ID:%5x \n ", val); -#else //000001.joelin - - AMAZON_SW_REG(AMAZON_SW_MDIO_CFG) = 0x2c50; - AMAZON_SW_REG(AMAZON_SW_EPHY) = 0xff; - - AMAZON_SW_REG(AMAZON_GPIO_P1_ALTSEL0) &= ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC); - AMAZON_SW_REG(AMAZON_GPIO_P1_ALTSEL1) &= ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC); - AMAZON_SW_REG(AMAZON_GPIO_P1_OD) |= (GPIO_MDIO|GPIO_MDCS|GPIO_MDC); - - ifx_gpio_init(); - register_chrdev(69, "adm6996", &adm_ops); - mdelay(100); - - /* create proc entries */ - // create_proc_read_entry("admide", 0, NULL, admide_proc, NULL); - -//joelin adm6996i support start - adm6996_mode=adm6996i; - ifx_sw_read(0xa0, &val); - adm6996_mode=adm6996l; - ifx_sw_read(0x200, &val1); -// printk ("\n %0x \n",val1); - if ((val&0xfff0)==0x1020) { - printk ("\n ADM6996I .. \n"); - adm6996_mode=adm6996i; - } - else if ((val1&0xffffff00)==0x71000) {//71010 or 71020 - printk ("\n ADM6996LC .. \n"); - adm6996_mode=adm6996lc; - } - else { - printk ("\n ADM6996L .. \n"); - adm6996_mode=adm6996l; - } -#endif //ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin - - if ((adm6996_mode==adm6996lc)||(adm6996_mode==adm6996i)){ -#if 0 /* removed by MarsLin */ - ifx_sw_write(0x29,0xc000); - ifx_sw_write(0x30,0x0985); -#else - ifx_sw_read(0xa0, &val); - if (val == 0x1021) // for both 6996LC and 6996I, only AB version need the patch - ifx_sw_write(0x29, 0x9000); - ifx_sw_write(0x30,0x0985); -#endif - } -//joelin adm6996i support end - return 0; -} - -void __exit cleanup_adm6996_module(void) -{ - printk("Free ADM device driver... \n"); - - unregister_chrdev(69, "adm6996"); - - /* remove proc entries */ - // remove_proc_entry("admide", NULL); -} - -/* MarsLin, add start */ -#if defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT) || defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT_MODULE) - #define SET_BIT(reg, mask) reg |= (mask) - #define CLEAR_BIT(reg, mask) reg &= (~mask) - static int ifx_hw_reset(void) - { - CLEAR_BIT((*AMAZON_GPIO_P0_ALTSEL0),0x2000); - CLEAR_BIT((*AMAZON_GPIO_P0_ALTSEL1),0x2000); - SET_BIT((*AMAZON_GPIO_P0_OD),0x2000); - SET_BIT((*AMAZON_GPIO_P0_DIR), 0x2000); - CLEAR_BIT((*AMAZON_GPIO_P0_OUT), 0x2000); - mdelay(500); - SET_BIT((*AMAZON_GPIO_P0_OUT), 0x2000); - cleanup_adm6996_module(); - return init_adm6996_module(); - } - int (*adm6996_hw_reset)(void) = ifx_hw_reset; - EXPORT_SYMBOL(adm6996_hw_reset); - EXPORT_SYMBOL(adm6996_mode); - int (*adm6996_sw_read)(unsigned int addr, unsigned int *data) = ifx_sw_read; - EXPORT_SYMBOL(adm6996_sw_read); - int (*adm6996_sw_write)(unsigned int addr, unsigned int data) = ifx_sw_write; - EXPORT_SYMBOL(adm6996_sw_write); -#endif -/* MarsLin, add end */ - -/* Santosh: for IGMP proxy/snooping, Begin */ -EXPORT_SYMBOL (adm_process_mac_table_request); -EXPORT_SYMBOL (adm_process_protocol_filter_request); -/* Santosh: for IGMP proxy/snooping, End */ - -MODULE_DESCRIPTION("ADMtek 6996 Driver"); -MODULE_AUTHOR("Joe Lin <joe.lin@infineon.com>"); -MODULE_LICENSE("GPL"); - -module_init(init_adm6996_module); -module_exit(cleanup_adm6996_module); - diff --git a/target/linux/amazon/files/drivers/net/ethernet/amazon_sw.c b/target/linux/amazon/files/drivers/net/ethernet/amazon_sw.c deleted file mode 100644 index d18b439cea..0000000000 --- a/target/linux/amazon/files/drivers/net/ethernet/amazon_sw.c +++ /dev/null @@ -1,899 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - */ -//----------------------------------------------------------------------- -/* - * Description: - * Driver for Infineon Amazon 3 port switch - */ -//----------------------------------------------------------------------- -/* Author: Wu Qi Ming[Qi-Ming.Wu@infineon.com] - * Created: 7-April-2004 - */ -//----------------------------------------------------------------------- -/* History - * Changed on: Jun 28, 2004 - * Changed by: peng.liu@infineon.com - * Reason: add hardware flow control (HFC) (CONFIG_NET_HW_FLOWCONTROL) - * - * Changed on: Apr 6, 2005 - * Changed by: mars.lin@infineon.com - * Reason : supoort port identification - */ - - -// copyright 2004-2005 infineon.com - -// copyright 2007 john crispin <blogic@openwrt.org> -// copyright 2007 felix fietkau <nbd@openwrt.org> -// copyright 2009 hauke mehrtens <hauke@hauke-m.de> - - -// TODO -// port vlan code from bcrm target... the tawainese code was scrapped due to crappyness -// check all the mmi reg settings and possibly document them better -// verify the ethtool code -// remove the while(1) stuff -// further clean up and rework ... but it works for now -// check the mode[]=bridge stuff -// verify that the ethaddr can be set from u-boot - - -#ifndef __KERNEL__ -#define __KERNEL__ -#endif - - -#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS) -#define MODVERSIONS -#endif - -#if defined(MODVERSIONS) && !defined(__GENKSYMS__) -#include <linux/modversions.h> -#endif - -#include <linux/module.h> -#include <linux/string.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/mii.h> -#include <asm/uaccess.h> -#include <linux/in.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/ip.h> -#include <linux/tcp.h> -#include <linux/skbuff.h> -#include <linux/in6.h> -#include <linux/proc_fs.h> -#include <linux/mm.h> -#include <linux/ethtool.h> -#include <asm/checksum.h> -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/amazon/amazon.h> -#include <asm/amazon/amazon_dma.h> -#include <asm/amazon/amazon_sw.h> - -// how many mii ports are there ? -#define AMAZON_SW_INT_NO 2 - -#define ETHERNET_PACKET_DMA_BUFFER_SIZE 1536 - -/***************************************** Module Parameters *************************************/ -static char mode[] = "bridge"; -module_param_array(mode, charp, NULL, 0); - -static int timeout = 1 * HZ; -module_param(timeout, int, 0); - -int switch_init(struct net_device *dev); -void switch_tx_timeout(struct net_device *dev); - -static struct net_device *switch_devs[2]; - -int add_mac_table_entry(u64 entry_value) -{ - int i; - u32 data1, data2; - - AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) = ~7; - - for (i = 0; i < 32; i++) { - AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0x80000000 | 0x20 | i; - while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {}; - data1 = AMAZON_SW_REG32(AMAZON_SW_DATA1); - data2 = AMAZON_SW_REG32(AMAZON_SW_DATA2); - if ((data1 & (0x00700000)) != 0x00700000) - continue; - AMAZON_SW_REG32(AMAZON_SW_DATA1) = (u32) (entry_value >> 32); - AMAZON_SW_REG32(AMAZON_SW_DATA2) = (u32) entry_value & 0xffffffff; - AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0xc0000020 | i; - while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {}; - break; - } - AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) |= 7; - if (i >= 32) - return -1; - return OK; -} - -u64 read_mac_table_entry(int index) -{ - u32 data1, data2; - u64 value; - AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0x80000000 | 0x20 | index; - while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {}; - data1 = AMAZON_SW_REG32(AMAZON_SW_DATA1) & 0xffffff; - data2 = AMAZON_SW_REG32(AMAZON_SW_DATA2); - value = (u64) data1 << 32 | (u64) data2; - return value; -} - -int write_mac_table_entry(int index, u64 value) -{ - u32 data1, data2; - data1 = (u32) (value >> 32); - data2 = (u32) value & 0xffffffff; - AMAZON_SW_REG32(AMAZON_SW_DATA1) = data1; - AMAZON_SW_REG32(AMAZON_SW_DATA2) = data2; - AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0xc0000020 | index; - while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {}; - return OK; -} - -u32 get_mdio_reg(int phy_addr, int reg_num) -{ - u32 value; - AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = (3 << 30) | ((phy_addr & 0x1f) << 21) | ((reg_num & 0x1f) << 16); - while (AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & (1 << 31)) {}; - value = AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & 0xffff; - return value; -} - -int set_mdio_reg(int phy_addr, int reg_num, u32 value) -{ - AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = (2 << 30) | ((phy_addr & 0x1f) << 21) | ((reg_num & 0x1f) << 16) | (value & 0xffff); - while (AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & (1 << 31)) {}; - return OK; -} - -int auto_negotiate(int phy_addr) -{ - u32 value = 0; - value = get_mdio_reg(phy_addr, MDIO_BASE_CONTROL_REG); - set_mdio_reg(phy_addr, MDIO_BASE_CONTROL_REG, (value | RESTART_AUTO_NEGOTIATION | AUTO_NEGOTIATION_ENABLE | PHY_RESET)); - return OK; -} - -/* - In this version of switch driver, we split the dma channels for the switch. - 2 for port0 and 2 for port1. So that we can do internal bridging if necessary. - In switch mode, packets coming in from port0 or port1 is able to do Destination - address lookup. Packets coming from port0 with destination address of port1 should - not go to pmac again. The switch hardware should be able to do the switch in the hard - ware level. Packets coming from the pmac should not do the DA look up in that the - desination is already known for the kernel. It only needs to go to the correct NIC to - find its way out. - */ -int amazon_sw_chip_init(void) -{ - u32 tmp1; - int i = 0; - - /* Aging tick select: 5mins */ - tmp1 = 0xa0; - if (strcmp(mode, "bridge") == 0) { - // bridge mode, set militarised mode to 1, no learning! - tmp1 |= 0xC00; - } else { - // enable learning for P0 and P1, - tmp1 |= 3; - } - - /* unknown broadcast/multicast/unicast to all ports */ - AMAZON_SW_REG32(AMAZON_SW_UN_DEST) = 0x1ff; - - AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) = tmp1; - - /* OCS:1 set OCS bit, split the two NIC in rx direction EDL:1 (enable DA lookup) */ -#if defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT) || defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT_MODULE) - AMAZON_SW_REG32(AMAZON_SW_P2_PCTL) = 0x700; -#else - AMAZON_SW_REG32(AMAZON_SW_P2_PCTL) = 0x401; -#endif - - /* EPC: 1 split the two NIC in tx direction CRC is generated */ - AMAZON_SW_REG32(AMAZON_SW_P2_CTL) = 0x6; - - // for bi-directional - AMAZON_SW_REG32(AMAZON_SW_P0_WM) = 0x14141412; - AMAZON_SW_REG32(AMAZON_SW_P1_WM) = 0x14141412; - AMAZON_SW_REG32(AMAZON_SW_P2_WM) = 0x28282826; - AMAZON_SW_REG32(AMAZON_SW_GBL_WM) = 0x0; - - AMAZON_SW_REG32(AMAZON_CGU_PLL0SR) = (AMAZON_SW_REG32(AMAZON_CGU_PLL0SR)) | 0x58000000; - // clock for PHY - AMAZON_SW_REG32(AMAZON_CGU_IFCCR) = (AMAZON_SW_REG32(AMAZON_CGU_IFCCR)) | 0x80000004; - // enable power for PHY - AMAZON_SW_REG32(AMAZON_PMU_PWDCR) = (AMAZON_SW_REG32(AMAZON_PMU_PWDCR)) | AMAZON_PMU_PWDCR_EPHY; - // set reverse MII, enable MDIO statemachine - AMAZON_SW_REG32(AMAZON_SW_MDIO_CFG) = 0x800027bf; - while (1) - if (((AMAZON_SW_REG32(AMAZON_SW_MDIO_CFG)) & 0x80000000) == 0) - break; - AMAZON_SW_REG32(AMAZON_SW_EPHY) = 0xff; - - // auto negotiation - AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = 0x83e08000; - auto_negotiate(0x1f); - - /* enable all ports */ - AMAZON_SW_REG32(AMAZON_SW_PS_CTL) = 0x7; - for (i = 0; i < 32; i++) - write_mac_table_entry(i, 1 << 50); - return 0; -} - -static unsigned char my_ethaddr[MAX_ADDR_LEN]; -/* need to get the ether addr from u-boot */ -static int __init ethaddr_setup(char *line) -{ - char *ep; - int i; - - memset(my_ethaddr, 0, MAX_ADDR_LEN); - for (i = 0; i < 6; i++) { - my_ethaddr[i] = line ? simple_strtoul(line, &ep, 16) : 0; - if (line) - line = (*ep) ? ep + 1 : ep; - } - printk(KERN_INFO "amazon_mii0: mac address %2x-%2x-%2x-%2x-%2x-%2x \n", my_ethaddr[0], my_ethaddr[1], my_ethaddr[2], my_ethaddr[3], my_ethaddr[4], my_ethaddr[5]); - return 0; -} - -__setup("ethaddr=", ethaddr_setup); - -static void open_rx_dma(struct net_device *dev) -{ - struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev); - struct dma_device_info *dma_dev = priv->dma_device; - int i; - - for (i = 0; i < dma_dev->num_rx_chan; i++) - dma_dev->rx_chan[i].control = 1; - dma_device_update_rx(dma_dev); -} - -#ifdef CONFIG_NET_HW_FLOWCONTROL -static void close_rx_dma(struct net_device *dev) -{ - struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev); - struct dma_device_info *dma_dev = priv->dma_device; - int i; - - for (i = 0; i < dma_dev->num_rx_chan; i++) - dma_dev->rx_chan[i].control = 0; - dma_device_update_rx(dma_dev); -} - -void amazon_xon(struct net_device *dev) -{ - unsigned long flag; - local_irq_save(flag); - open_rx_dma(dev); - local_irq_restore(flag); -} -#endif - -int switch_open(struct net_device *dev) -{ - struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev); - if (!strcmp(dev->name, "eth1")) { - priv->mdio_phy_addr = PHY0_ADDR; - } - open_rx_dma(dev); - -#ifdef CONFIG_NET_HW_FLOWCONTROL - if ((priv->fc_bit = netdev_register_fc(dev, amazon_xon)) == 0) { - printk(KERN_WARNING "amazon_mii0: Hardware Flow Control register fails\n"); - } -#endif - - netif_start_queue(dev); - return OK; -} - -int switch_release(struct net_device *dev) -{ - int i; - struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev); - struct dma_device_info *dma_dev = priv->dma_device; - - for (i = 0; i < dma_dev->num_tx_chan; i++) - dma_dev->tx_chan[i].control = 0; - for (i = 0; i < dma_dev->num_rx_chan; i++) - dma_dev->rx_chan[i].control = 0; - - dma_device_update(dma_dev); - -#ifdef CONFIG_NET_HW_FLOWCONTROL - if (priv->fc_bit) { - netdev_unregister_fc(priv->fc_bit); - } -#endif - netif_stop_queue(dev); - - return OK; -} - - -void switch_rx(struct net_device *dev, int len, struct sk_buff *skb) -{ - struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev); -#ifdef CONFIG_NET_HW_FLOWCONTROL - int mit_sel = 0; -#endif - skb->dev = dev; - skb->protocol = eth_type_trans(skb, dev); - -#ifdef CONFIG_NET_HW_FLOWCONTROL - mit_sel = netif_rx(skb); - switch (mit_sel) { - case NET_RX_SUCCESS: - case NET_RX_CN_LOW: - case NET_RX_CN_MOD: - break; - case NET_RX_CN_HIGH: - break; - case NET_RX_DROP: - if ((priv->fc_bit) - && (!test_and_set_bit(priv->fc_bit, &netdev_fc_xoff))) { - close_rx_dma(dev); - } - break; - } -#else - netif_rx(skb); -#endif - priv->stats.rx_packets++; - priv->stats.rx_bytes += len; - return; -} - -int asmlinkage switch_hw_tx(char *buf, int len, struct net_device *dev) -{ - struct switch_priv *priv = netdev_priv(dev); - struct dma_device_info *dma_dev = priv->dma_device; - - dma_dev->current_tx_chan = 0; - return dma_device_write(dma_dev, buf, len, priv->skb); -} - -int asmlinkage switch_tx(struct sk_buff *skb, struct net_device *dev) -{ - int len; - char *data; - struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev); - - len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; - data = skb->data; - priv->skb = skb; - dev->trans_start = jiffies; - - if (switch_hw_tx(data, len, dev) != len) { - dev_kfree_skb_any(skb); - return OK; - } - - priv->stats.tx_packets++; - priv->stats.tx_bytes += len; - return OK; -} - -void switch_tx_timeout(struct net_device *dev) -{ - struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev); - priv->stats.tx_errors++; - netif_wake_queue(dev); - return; -} - -void negotiate(struct net_device *dev) -{ - struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev); - unsigned short data = get_mdio_reg(priv->mdio_phy_addr, MDIO_ADVERTISMENT_REG); - - data &= ~(MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD); - - switch (priv->current_speed_selection) { - case 10: - if (priv->current_duplex == full) - data |= MDIO_ADVERT_10_FD; - else if (priv->current_duplex == half) - data |= MDIO_ADVERT_10_HD; - else - data |= MDIO_ADVERT_10_HD | MDIO_ADVERT_10_FD; - break; - - case 100: - if (priv->current_duplex == full) - data |= MDIO_ADVERT_100_FD; - else if (priv->current_duplex == half) - data |= MDIO_ADVERT_100_HD; - else - data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD; - break; - - case 0: /* Auto */ - if (priv->current_duplex == full) - data |= MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD; - else if (priv->current_duplex == half) - data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_10_HD; - else - data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD; - break; - - default: /* assume autoneg speed and duplex */ - data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD; - } - - set_mdio_reg(priv->mdio_phy_addr, MDIO_ADVERTISMENT_REG, data); - - /* Renegotiate with link partner */ - - data = get_mdio_reg(priv->mdio_phy_addr, MDIO_BASE_CONTROL_REG); - data |= MDIO_BC_NEGOTIATE; - - set_mdio_reg(priv->mdio_phy_addr, MDIO_BASE_CONTROL_REG, data); - -} - - -void set_duplex(struct net_device *dev, enum duplex new_duplex) -{ - struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev); - if (new_duplex != priv->current_duplex) { - priv->current_duplex = new_duplex; - negotiate(dev); - } -} - -void set_speed(struct net_device *dev, unsigned long speed) -{ - struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev); - priv->current_speed_selection = speed; - negotiate(dev); -} - -static int switch_ethtool_ioctl(struct net_device *dev, struct ifreq *ifr) -{ - struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev); - struct ethtool_cmd ecmd; - - if (copy_from_user(&ecmd, ifr->ifr_data, sizeof(ecmd))) - return -EFAULT; - - switch (ecmd.cmd) { - case ETHTOOL_GSET: - memset((void *) &ecmd, 0, sizeof(ecmd)); - ecmd.supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full; - ecmd.port = PORT_TP; - ecmd.transceiver = XCVR_EXTERNAL; - ecmd.phy_address = priv->mdio_phy_addr; - - ecmd.speed = priv->current_speed; - - ecmd.duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF; - - ecmd.advertising = ADVERTISED_TP; - if (priv->current_duplex == autoneg && priv->current_speed_selection == 0) - ecmd.advertising |= ADVERTISED_Autoneg; - else { - ecmd.advertising |= ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full; - if (priv->current_speed_selection == 10) - ecmd.advertising &= ~(ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full); - else if (priv->current_speed_selection == 100) - ecmd.advertising &= ~(ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full); - if (priv->current_duplex == half) - ecmd.advertising &= ~(ADVERTISED_10baseT_Full | ADVERTISED_100baseT_Full); - else if (priv->current_duplex == full) - ecmd.advertising &= ~(ADVERTISED_10baseT_Half | ADVERTISED_100baseT_Half); - } - ecmd.autoneg = AUTONEG_ENABLE; - if (copy_to_user(ifr->ifr_data, &ecmd, sizeof(ecmd))) - return -EFAULT; - break; - - case ETHTOOL_SSET: - if (!capable(CAP_NET_ADMIN)) { - return -EPERM; - } - if (ecmd.autoneg == AUTONEG_ENABLE) { - set_duplex(dev, autoneg); - set_speed(dev, 0); - } else { - set_duplex(dev, ecmd.duplex == DUPLEX_HALF ? half : full); - set_speed(dev, ecmd.speed == SPEED_10 ? 10 : 100); - } - break; - - case ETHTOOL_GDRVINFO: - { - struct ethtool_drvinfo info; - memset((void *) &info, 0, sizeof(info)); - strncpy(info.driver, "AMAZONE", sizeof(info.driver) - 1); - strncpy(info.fw_version, "N/A", sizeof(info.fw_version) - 1); - strncpy(info.bus_info, "N/A", sizeof(info.bus_info) - 1); - info.regdump_len = 0; - info.eedump_len = 0; - info.testinfo_len = 0; - if (copy_to_user(ifr->ifr_data, &info, sizeof(info))) - return -EFAULT; - } - break; - case ETHTOOL_NWAY_RST: - if (priv->current_duplex == autoneg && priv->current_speed_selection == 0) - negotiate(dev); - break; - default: - return -EOPNOTSUPP; - break; - } - return 0; -} - - - -int mac_table_tools_ioctl(struct net_device *dev, struct mac_table_req *req) -{ - int cmd; - int i; - cmd = req->cmd; - switch (cmd) { - case RESET_MAC_TABLE: - for (i = 0; i < 32; i++) { - write_mac_table_entry(i, 0); - } - break; - case READ_MAC_ENTRY: - req->entry_value = read_mac_table_entry(req->index); - break; - case WRITE_MAC_ENTRY: - write_mac_table_entry(req->index, req->entry_value); - break; - case ADD_MAC_ENTRY: - add_mac_table_entry(req->entry_value); - break; - default: - return -EINVAL; - } - - return 0; -} - - -/* - the ioctl for the switch driver is developed in the conventional way - the control type falls into some basic categories, among them, the - SIOCETHTOOL is the traditional eth interface. VLAN_TOOLS and - MAC_TABLE_TOOLS are designed specifically for amazon chip. User - should be aware of the data structures used in these interfaces. -*/ -int switch_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - struct data_req *switch_data_req = (struct data_req *) ifr->ifr_data; - struct mac_table_req *switch_mac_table_req; - switch (cmd) { - case SIOCETHTOOL: - switch_ethtool_ioctl(dev, ifr); - break; - case SIOCGMIIPHY: /* Get PHY address */ - break; - case SIOCGMIIREG: /* Read MII register */ - break; - case SIOCSMIIREG: /* Write MII register */ - break; - case SET_ETH_SPEED_10: /* 10 Mbps */ - break; - case SET_ETH_SPEED_100: /* 100 Mbps */ - break; - case SET_ETH_SPEED_AUTO: /* Auto negotiate speed */ - break; - case SET_ETH_DUPLEX_HALF: /* Half duplex. */ - break; - case SET_ETH_DUPLEX_FULL: /* Full duplex. */ - break; - case SET_ETH_DUPLEX_AUTO: /* Autonegotiate duplex */ - break; - case SET_ETH_REG: - AMAZON_SW_REG32(switch_data_req->index) = switch_data_req->value; - break; - case MAC_TABLE_TOOLS: - switch_mac_table_req = (struct mac_table_req *) ifr->ifr_data; - mac_table_tools_ioctl(dev, switch_mac_table_req); - break; - default: - return -EINVAL; - } - - return 0; -} - -struct net_device_stats *switch_stats(struct net_device *dev) -{ - struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev); - return &priv->stats; -} - -int switch_change_mtu(struct net_device *dev, int new_mtu) -{ - if (new_mtu >= 1516) - new_mtu = 1516; - dev->mtu = new_mtu; - return 0; -} - -int switch_hw_receive(struct net_device *dev, struct dma_device_info *dma_dev) -{ - u8 *buf = NULL; - int len = 0; - struct sk_buff *skb = NULL; - - len = dma_device_read(dma_dev, &buf, (void **) &skb); - - if (len >= 0x600) { - printk(KERN_WARNING "amazon_mii0: packet too large %d\n", len); - goto switch_hw_receive_err_exit; - } - - /* remove CRC */ - len -= 4; - if (skb == NULL) { - printk(KERN_WARNING "amazon_mii0: cannot restore pointer\n"); - goto switch_hw_receive_err_exit; - } - if (len > (skb->end - skb->tail)) { - printk(KERN_WARNING "amazon_mii0: BUG, len:%d end:%p tail:%p\n", (len + 4), skb->end, skb->tail); - goto switch_hw_receive_err_exit; - } - skb_put(skb, len); - skb->dev = dev; - switch_rx(dev, len, skb); - return OK; - - switch_hw_receive_err_exit: - if (skb) - dev_kfree_skb_any(skb); - return -EIO; -} - -int dma_intr_handler(struct dma_device_info *dma_dev, int status) -{ - struct net_device *dev; - - dev = dma_dev->priv; - switch (status) { - case RCV_INT: - switch_hw_receive(dev, dma_dev); - break; - case TX_BUF_FULL_INT: - netif_stop_queue(dev); - break; - case TRANSMIT_CPT_INT: - netif_wake_queue(dev); - break; - } - return OK; -} - -/* reserve 2 bytes in front of data pointer*/ -u8 *dma_buffer_alloc(int len, int *byte_offset, void **opt) -{ - u8 *buffer = NULL; - struct sk_buff *skb = NULL; - skb = dev_alloc_skb(ETHERNET_PACKET_DMA_BUFFER_SIZE); - if (skb == NULL) { - return NULL; - } - buffer = (u8 *) (skb->data); - skb_reserve(skb, 2); - *(int *) opt = (int) skb; - *byte_offset = 2; - return buffer; -} - -int dma_buffer_free(u8 * dataptr, void *opt) -{ - struct sk_buff *skb = NULL; - if (opt == NULL) { - kfree(dataptr); - } else { - skb = (struct sk_buff *) opt; - dev_kfree_skb_any(skb); - } - return OK; -} - -int init_dma_device(_dma_device_info * dma_dev, struct net_device *dev) -{ - int i; - int num_tx_chan, num_rx_chan; - if (strcmp(dma_dev->device_name, "switch1") == 0) { - num_tx_chan = 1; - num_rx_chan = 2; - } else { - num_tx_chan = 1; - num_rx_chan = 2; - } - dma_dev->priv = dev; - - dma_dev->weight = 1; - dma_dev->num_tx_chan = num_tx_chan; - dma_dev->num_rx_chan = num_rx_chan; - dma_dev->ack = 1; - dma_dev->tx_burst_len = 4; - dma_dev->rx_burst_len = 4; - for (i = 0; i < dma_dev->num_tx_chan; i++) { - dma_dev->tx_chan[i].weight = QOS_DEFAULT_WGT; - dma_dev->tx_chan[i].desc_num = 10; - dma_dev->tx_chan[i].packet_size = 0; - dma_dev->tx_chan[i].control = 0; - } - for (i = 0; i < num_rx_chan; i++) { - dma_dev->rx_chan[i].weight = QOS_DEFAULT_WGT; - dma_dev->rx_chan[i].desc_num = 10; - dma_dev->rx_chan[i].packet_size = ETHERNET_PACKET_DMA_BUFFER_SIZE; - dma_dev->rx_chan[i].control = 0; - } - dma_dev->intr_handler = dma_intr_handler; - dma_dev->buffer_alloc = dma_buffer_alloc; - dma_dev->buffer_free = dma_buffer_free; - return 0; -} - -int switch_set_mac_address(struct net_device *dev, void *p) -{ - struct sockaddr *addr = p; - memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); - return OK; -} - -static const struct net_device_ops amazon_mii_ops = { - .ndo_init = switch_init, - .ndo_open = switch_open, - .ndo_stop = switch_release, - .ndo_start_xmit = switch_tx, - .ndo_do_ioctl = switch_ioctl, - .ndo_get_stats = switch_stats, - .ndo_change_mtu = switch_change_mtu, - .ndo_set_mac_address = switch_set_mac_address, - .ndo_tx_timeout = switch_tx_timeout, -}; - -int switch_init(struct net_device *dev) -{ - u64 retval = 0; - int i; - int result; - struct switch_priv *priv; - ether_setup(dev); /* assign some of the fields */ - printk(KERN_INFO "amazon_mii0: %s up using ", dev->name); - dev->watchdog_timeo = timeout; - - priv = netdev_priv(dev); - priv->dma_device = (struct dma_device_info *) kmalloc(sizeof(struct dma_device_info), GFP_KERNEL); - if (priv->num == 0) { - sprintf(priv->dma_device->device_name, "switch1"); - } else if (priv->num == 1) { - sprintf(priv->dma_device->device_name, "switch2"); - } - printk("\"%s\"\n", priv->dma_device->device_name); - init_dma_device(priv->dma_device, dev); - result = dma_device_register(priv->dma_device); - - /* read the mac address from the mac table and put them into the mac table. */ - for (i = 0; i < 6; i++) { - retval += my_ethaddr[i]; - } - /* ethaddr not set in u-boot ? */ - if (retval == 0) { - dev->dev_addr[0] = 0x00; - dev->dev_addr[1] = 0x20; - dev->dev_addr[2] = 0xda; - dev->dev_addr[3] = 0x86; - dev->dev_addr[4] = 0x23; - dev->dev_addr[5] = 0x74 + (unsigned char) priv->num; - } else { - for (i = 0; i < 6; i++) { - dev->dev_addr[i] = my_ethaddr[i]; - } - dev->dev_addr[5] += +(unsigned char) priv->num; - } - return OK; -} - -static int amazon_mii_probe(struct platform_device *dev) -{ - int i = 0, result, device_present = 0; - struct switch_priv *priv; - - for (i = 0; i < AMAZON_SW_INT_NO; i++) { - switch_devs[i] = alloc_etherdev(sizeof(struct switch_priv)); - switch_devs[i]->netdev_ops = &amazon_mii_ops; - strcpy(switch_devs[i]->name, "eth%d"); - priv = (struct switch_priv *) netdev_priv(switch_devs[i]); - priv->num = i; - if ((result = register_netdev(switch_devs[i]))) - printk(KERN_WARNING "amazon_mii0: error %i registering device \"%s\"\n", result, switch_devs[i]->name); - else - device_present++; - } - amazon_sw_chip_init(); - return device_present ? 0 : -ENODEV; -} - -static int amazon_mii_remove(struct platform_device *dev) -{ - int i; - struct switch_priv *priv; - for (i = 0; i < AMAZON_SW_INT_NO; i++) { - priv = netdev_priv(switch_devs[i]); - if (priv->dma_device) { - dma_device_unregister(priv->dma_device); - kfree(priv->dma_device); - } - kfree(netdev_priv(switch_devs[i])); - unregister_netdev(switch_devs[i]); - } - return 0; -} - -static struct platform_driver amazon_mii_driver = { - .probe = amazon_mii_probe, - .remove = amazon_mii_remove, - .driver = { - .name = "amazon_mii0", - .owner = THIS_MODULE, - }, -}; - -static int __init amazon_mii_init(void) -{ - int ret = platform_driver_register(&amazon_mii_driver); - if (ret) - printk(KERN_WARNING "amazon_mii0: Error registering platfom driver!\n"); - return ret; -} - -static void __exit amazon_mii_cleanup(void) -{ - platform_driver_unregister(&amazon_mii_driver); -} - -module_init(amazon_mii_init); -module_exit(amazon_mii_cleanup); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Wu Qi Ming"); -MODULE_DESCRIPTION("ethernet driver for AMAZON boards"); - diff --git a/target/linux/amazon/files/drivers/tty/serial/amazon_asc.c b/target/linux/amazon/files/drivers/tty/serial/amazon_asc.c deleted file mode 100644 index bb2dd72222..0000000000 --- a/target/linux/amazon/files/drivers/tty/serial/amazon_asc.c +++ /dev/null @@ -1,711 +0,0 @@ -/* - * Driver for AMAZONASC serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * Based on drivers/serial/serial_s3c2400.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Copyright (C) 2004 Infineon IFAP DC COM CPE - * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - */ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/ptrace.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/circ_buf.h> -#include <linux/serial.h> -#include <linux/serial_core.h> -#include <linux/console.h> -#include <linux/sysrq.h> -#include <linux/irq.h> -#include <linux/platform_device.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/bitops.h> -#include <asm/amazon/amazon.h> -#include <asm/amazon/irq.h> -#include <asm/amazon/serial.h> - -#define PORT_AMAZONASC 111 - -#include <linux/serial_core.h> - -#define UART_NR 1 - -#define UART_DUMMY_UER_RX 1 - -#define SERIAL_AMAZONASC_MAJOR TTY_MAJOR -#define CALLOUT_AMAZONASC_MAJOR TTYAUX_MAJOR -#define SERIAL_AMAZONASC_MINOR 64 -#define SERIAL_AMAZONASC_NR UART_NR - -static void amazonasc_tx_chars(struct uart_port *port); -static struct uart_port amazonasc_ports[UART_NR]; -static struct uart_driver amazonasc_reg; -static unsigned int uartclk = 0; - -static void amazonasc_stop_tx(struct uart_port *port) -{ - /* fifo underrun shuts up after firing once */ - return; -} - -static void amazonasc_start_tx(struct uart_port *port) -{ - unsigned long flags; - - local_irq_save(flags); - amazonasc_tx_chars(port); - local_irq_restore(flags); - - return; -} - -static void amazonasc_stop_rx(struct uart_port *port) -{ - /* clear the RX enable bit */ - amazon_writel(ASCWHBCON_CLRREN, AMAZON_ASC_WHBCON); -} - -static void amazonasc_enable_ms(struct uart_port *port) -{ - /* no modem signals */ - return; -} - -#include <linux/version.h> - -static void -amazonasc_rx_chars(struct uart_port *port) -{ -#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 31)) - struct tty_struct *tty = port->state->port.tty; -#else - struct tty_struct *tty = port->info->port.tty; -#endif - unsigned int ch = 0, rsr = 0, fifocnt; - - fifocnt = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_RXFFLMASK; - while (fifocnt--) - { - u8 flag = TTY_NORMAL; - ch = amazon_readl(AMAZON_ASC_RBUF); - rsr = (amazon_readl(AMAZON_ASC_CON) & ASCCON_ANY) | UART_DUMMY_UER_RX; - tty_flip_buffer_push(tty); - port->icount.rx++; - - /* - * Note that the error handling code is - * out of the main execution path - */ - if (rsr & ASCCON_ANY) { - if (rsr & ASCCON_PE) { - port->icount.parity++; - amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRPE, ASCWHBCON_CLRPE); - } else if (rsr & ASCCON_FE) { - port->icount.frame++; - amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRFE, ASCWHBCON_CLRFE); - } - if (rsr & ASCCON_OE) { - port->icount.overrun++; - amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLROE, ASCWHBCON_CLROE); - } - - rsr &= port->read_status_mask; - - if (rsr & ASCCON_PE) - flag = TTY_PARITY; - else if (rsr & ASCCON_FE) - flag = TTY_FRAME; - } - - if ((rsr & port->ignore_status_mask) == 0) - tty_insert_flip_char(tty, ch, flag); - - if (rsr & ASCCON_OE) - /* - * Overrun is special, since it's reported - * immediately, and doesn't affect the current - * character - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - if (ch != 0) - tty_flip_buffer_push(tty); - - return; -} - - -static void amazonasc_tx_chars(struct uart_port *port) -{ -#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 31)) - struct circ_buf *xmit = &port->state->xmit; -#else - struct circ_buf *xmit = &port->info->xmit; -#endif - - if (uart_tx_stopped(port)) { - amazonasc_stop_tx(port); - return; - } - - while (((amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK) - >> ASCFSTAT_TXFFLOFF) != AMAZONASC_TXFIFO_FULL) - { - if (port->x_char) { - amazon_writel(port->x_char, AMAZON_ASC_TBUF); - port->icount.tx++; - port->x_char = 0; - continue; - } - - if (uart_circ_empty(xmit)) - break; - - amazon_writel(xmit->buf[xmit->tail], AMAZON_ASC_TBUF); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); -} - -static irqreturn_t amazonasc_tx_int(int irq, void *port) -{ - amazon_writel(ASC_IRNCR_TIR, AMAZON_ASC_IRNCR1); - amazonasc_start_tx(port); - - /* clear any pending interrupts */ - amazon_writel_masked(AMAZON_ASC_WHBCON, - (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE), - (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE)); - - return IRQ_HANDLED; -} - -static irqreturn_t amazonasc_er_int(int irq, void *port) -{ - /* clear any pending interrupts */ - amazon_writel_masked(AMAZON_ASC_WHBCON, - (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE), - (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE)); - - return IRQ_HANDLED; -} - -static irqreturn_t amazonasc_rx_int(int irq, void *port) -{ - amazon_writel(ASC_IRNCR_RIR, AMAZON_ASC_IRNCR1); - amazonasc_rx_chars((struct uart_port *) port); - return IRQ_HANDLED; -} - -static u_int amazonasc_tx_empty(struct uart_port *port) -{ - int status; - - /* - * FSTAT tells exactly how many bytes are in the FIFO. - * The question is whether we really need to wait for all - * 16 bytes to be transmitted before reporting that the - * transmitter is empty. - */ - status = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK; - return status ? 0 : TIOCSER_TEMT; -} - -static u_int amazonasc_get_mctrl(struct uart_port *port) -{ - /* no modem control signals - the readme says to pretend all are set */ - return TIOCM_CTS|TIOCM_CAR|TIOCM_DSR; -} - -static void amazonasc_set_mctrl(struct uart_port *port, u_int mctrl) -{ - /* no modem control - just return */ - return; -} - -static void amazonasc_break_ctl(struct uart_port *port, int break_state) -{ - /* no way to send a break */ - return; -} - -static int amazonasc_startup(struct uart_port *port) -{ - unsigned int con = 0; - unsigned long flags; - int retval; - - /* this assumes: CON.BRS = CON.FDE = 0 */ - if (uartclk == 0) - uartclk = amazon_get_fpi_hz(); - - amazonasc_ports[0].uartclk = uartclk; - - local_irq_save(flags); - - /* this setup was probably already done in u-boot */ - /* ASC and GPIO Port 1 bits 3 and 4 share the same pins - * P1.3 (RX) in, Alternate 10 - * P1.4 (TX) in, Alternate 10 - */ - amazon_writel_masked(AMAZON_GPIO_P1_DIR, 0x18, 0x10); //P1.4 output, P1.3 input - amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL0, 0x18, 0x18); //ALTSETL0 11 - amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL1, 0x18, 0); //ALTSETL1 00 - amazon_writel_masked(AMAZON_GPIO_P1_OD, 0x18, 0x10); - - /* set up the CLC */ - amazon_writel_masked(AMAZON_ASC_CLC, AMAZON_ASC_CLC_DISS, 0); - amazon_writel_masked(AMAZON_ASC_CLC, ASCCLC_RMCMASK, 1 << ASCCLC_RMCOFFSET); - - /* asynchronous mode */ - con = ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_OEN | ASCCON_PEN; - - /* choose the line - there's only one */ - amazon_writel(0, AMAZON_ASC_PISEL); - amazon_writel(((AMAZONASC_TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) | ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU, - AMAZON_ASC_TXFCON); - amazon_writel(((AMAZONASC_RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK) | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU, - AMAZON_ASC_RXFCON); - wmb(); - - amazon_writel_masked(AMAZON_ASC_CON, con, con); - - retval = request_irq(AMAZONASC_RIR, amazonasc_rx_int, 0, "asc_rx", port); - if (retval){ - printk("failed to request amazonasc_rx_int\n"); - return retval; - } - retval = request_irq(AMAZONASC_TIR, amazonasc_tx_int, 0, "asc_tx", port); - if (retval){ - printk("failed to request amazonasc_tx_int\n"); - goto err1; - } - - retval = request_irq(AMAZONASC_EIR, amazonasc_er_int, 0, "asc_er", port); - if (retval){ - printk("failed to request amazonasc_er_int\n"); - goto err2; - } - - local_irq_restore(flags); - return 0; - -err2: - free_irq(AMAZONASC_TIR, port); - -err1: - free_irq(AMAZONASC_RIR, port); - local_irq_restore(flags); - return retval; -} - -static void amazonasc_shutdown(struct uart_port *port) -{ - free_irq(AMAZONASC_RIR, port); - free_irq(AMAZONASC_TIR, port); - free_irq(AMAZONASC_EIR, port); - /* - * disable the baudrate generator to disable the ASC - */ - amazon_writel(0, AMAZON_ASC_CON); - - /* flush and then disable the fifos */ - amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFFLU, ASCRXFCON_RXFFLU); - amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFEN, 0); - amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFFLU, ASCTXFCON_TXFFLU); - amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFEN, 0); -} - -static void amazonasc_set_termios(struct uart_port *port, struct ktermios *new, struct ktermios *old) -{ - unsigned int cflag; - unsigned int iflag; - unsigned int baud, quot; - unsigned int con = 0; - unsigned long flags; - - cflag = new->c_cflag; - iflag = new->c_iflag; - - /* byte size and parity */ - switch (cflag & CSIZE) { - /* 7 bits are always with parity */ - case CS7: con = ASCCON_M_7ASYNCPAR; break; - /* the ASC only suports 7 and 8 bits */ - case CS5: - case CS6: - default: - if (cflag & PARENB) - con = ASCCON_M_8ASYNCPAR; - else - con = ASCCON_M_8ASYNC; - break; - } - if (cflag & CSTOPB) - con |= ASCCON_STP; - if (cflag & PARENB) { - if (!(cflag & PARODD)) - con &= ~ASCCON_ODD; - else - con |= ASCCON_ODD; - } - - port->read_status_mask = ASCCON_OE; - if (iflag & INPCK) - port->read_status_mask |= ASCCON_FE | ASCCON_PE; - - port->ignore_status_mask = 0; - if (iflag & IGNPAR) - port->ignore_status_mask |= ASCCON_FE | ASCCON_PE; - - if (iflag & IGNBRK) { - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (iflag & IGNPAR) - port->ignore_status_mask |= ASCCON_OE; - } - - /* - * Ignore all characters if CREAD is not set. - */ - if ((cflag & CREAD) == 0) - port->ignore_status_mask |= UART_DUMMY_UER_RX; - - /* set error signals - framing, parity and overrun */ - con |= ASCCON_FEN; - con |= ASCCON_OEN; - con |= ASCCON_PEN; - /* enable the receiver */ - con |= ASCCON_REN; - - /* block the IRQs */ - local_irq_save(flags); - - /* set up CON */ - amazon_writel(con, AMAZON_ASC_CON); - - /* Set baud rate - take a divider of 2 into account */ - baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - quot = quot/2 - 1; - - /* the next 3 probably already happened when we set CON above */ - /* disable the baudrate generator */ - amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, 0); - /* make sure the fractional divider is off */ - amazon_writel_masked(AMAZON_ASC_CON, ASCCON_FDE, 0); - /* set up to use divisor of 2 */ - amazon_writel_masked(AMAZON_ASC_CON, ASCCON_BRS, 0); - /* now we can write the new baudrate into the register */ - amazon_writel(quot, AMAZON_ASC_BTR); - /* turn the baudrate generator back on */ - amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, ASCCON_R); - - local_irq_restore(flags); -} - -static const char *amazonasc_type(struct uart_port *port) -{ - return port->type == PORT_AMAZONASC ? "AMAZONASC" : NULL; -} - -/* - * Release the memory region(s) being used by 'port' - */ -static void amazonasc_release_port(struct uart_port *port) -{ - return; -} - -/* - * Request the memory region(s) being used by 'port' - */ -static int amazonasc_request_port(struct uart_port *port) -{ - return 0; -} - -/* - * Configure/autoconfigure the port. - */ -static void amazonasc_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_AMAZONASC; - amazonasc_request_port(port); - } -} - -/* - * verify the new serial_struct (for TIOCSSERIAL). - */ -static int amazonasc_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - int ret = 0; - if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMAZONASC) - ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= NR_IRQS) - ret = -EINVAL; - if (ser->baud_base < 9600) - ret = -EINVAL; - return ret; -} - -static struct uart_ops amazonasc_pops = { - .tx_empty = amazonasc_tx_empty, - .set_mctrl = amazonasc_set_mctrl, - .get_mctrl = amazonasc_get_mctrl, - .stop_tx = amazonasc_stop_tx, - .start_tx = amazonasc_start_tx, - .stop_rx = amazonasc_stop_rx, - .enable_ms = amazonasc_enable_ms, - .break_ctl = amazonasc_break_ctl, - .startup = amazonasc_startup, - .shutdown = amazonasc_shutdown, - .set_termios = amazonasc_set_termios, - .type = amazonasc_type, - .release_port = amazonasc_release_port, - .request_port = amazonasc_request_port, - .config_port = amazonasc_config_port, - .verify_port = amazonasc_verify_port, -}; - -static struct uart_port amazonasc_ports[UART_NR] = { - { - membase: (void *)AMAZON_ASC, - mapbase: AMAZON_ASC, - iotype: SERIAL_IO_MEM, - irq: AMAZONASC_RIR, /* RIR */ - uartclk: 0, /* filled in dynamically */ - fifosize: 16, - unused: { AMAZONASC_TIR, AMAZONASC_EIR}, /* xmit/error/xmit-buffer-empty IRQ */ - type: PORT_AMAZONASC, - ops: &amazonasc_pops, - flags: ASYNC_BOOT_AUTOCONF, - }, -}; - -static void amazonasc_console_write(struct console *co, const char *s, u_int count) -{ - int i, fifocnt; - unsigned long flags; - local_irq_save(flags); - for (i = 0; i < count;) - { - /* wait until the FIFO is not full */ - do - { - fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK) - >> ASCFSTAT_TXFFLOFF; - } while (fifocnt == AMAZONASC_TXFIFO_FULL); - if (s[i] == '\0') - { - break; - } - if (s[i] == '\n') - { - amazon_writel('\r', AMAZON_ASC_TBUF); - do - { - fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) & - ASCFSTAT_TXFFLMASK) >> ASCFSTAT_TXFFLOFF; - } while (fifocnt == AMAZONASC_TXFIFO_FULL); - } - amazon_writel(s[i], AMAZON_ASC_TBUF); - i++; - } - - local_irq_restore(flags); -} - -static void __init -amazonasc_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits) -{ - u_int lcr_h; - - lcr_h = amazon_readl(AMAZON_ASC_CON); - /* do this only if the ASC is turned on */ - if (lcr_h & ASCCON_R) { - u_int quot, div, fdiv, frac; - - *parity = 'n'; - if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR || - (lcr_h & ASCCON_MODEMASK) == ASCCON_M_8ASYNCPAR) { - if (lcr_h & ASCCON_ODD) - *parity = 'o'; - else - *parity = 'e'; - } - - if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR) - *bits = 7; - else - *bits = 8; - - quot = amazon_readl(AMAZON_ASC_BTR) + 1; - - /* this gets hairy if the fractional divider is used */ - if (lcr_h & ASCCON_FDE) - { - div = 1; - fdiv = amazon_readl(AMAZON_ASC_FDV); - if (fdiv == 0) - fdiv = 512; - frac = 512; - } - else - { - div = lcr_h & ASCCON_BRS ? 3 : 2; - fdiv = frac = 1; - } - /* - * This doesn't work exactly because we use integer - * math to calculate baud which results in rounding - * errors when we try to go from quot -> baud !! - * Try to make this work for both the fractional divider - * and the simple divider. Also try to avoid rounding - * errors using integer math. - */ - - *baud = frac * (port->uartclk / (div * 512 * 16 * quot)); - if (*baud > 1100 && *baud < 2400) - *baud = 1200; - if (*baud > 2300 && *baud < 4800) - *baud = 2400; - if (*baud > 4700 && *baud < 9600) - *baud = 4800; - if (*baud > 9500 && *baud < 19200) - *baud = 9600; - if (*baud > 19000 && *baud < 38400) - *baud = 19200; - if (*baud > 38400 && *baud < 57600) - *baud = 38400; - if (*baud > 57600 && *baud < 115200) - *baud = 57600; - if (*baud > 115200 && *baud < 230400) - *baud = 115200; - } -} - -static int __init amazonasc_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* this assumes: CON.BRS = CON.FDE = 0 */ - if (uartclk == 0) - uartclk = amazon_get_fpi_hz(); - co->index = 0; - port = &amazonasc_ports[0]; - amazonasc_ports[0].uartclk = uartclk; - amazonasc_ports[0].type = PORT_AMAZONASC; - - if (options){ - uart_parse_options(options, &baud, &parity, &bits, &flow); - } - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver amazonasc_reg; -static struct console amazonasc_console = { - name: "ttyS", - write: amazonasc_console_write, - device: uart_console_device, - setup: amazonasc_console_setup, - flags: CON_PRINTBUFFER, - index: -1, - data: &amazonasc_reg, -}; - -static struct uart_driver amazonasc_reg = { - .owner = THIS_MODULE, - .driver_name = "serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = UART_NR, - .cons = &amazonasc_console, -}; - -static int amazon_asc_probe(struct platform_device *dev) -{ - unsigned char res; - uart_register_driver(&amazonasc_reg); - res = uart_add_one_port(&amazonasc_reg, &amazonasc_ports[0]); - return res; -} - -static int amazon_asc_remove(struct platform_device *dev) -{ - uart_unregister_driver(&amazonasc_reg); - return 0; -} - -static struct platform_driver amazon_asc_driver = { - .probe = amazon_asc_probe, - .remove = amazon_asc_remove, - .driver = { - .name = "amazon_asc", - .owner = THIS_MODULE, - }, -}; - -static int __init amazon_asc_init(void) -{ - int ret = platform_driver_register(&amazon_asc_driver); - if (ret) - printk(KERN_WARNING "amazon_asc: error registering platfom driver!\n"); - return ret; -} - -static void __exit amazon_asc_cleanup(void) -{ - platform_driver_unregister(&amazon_asc_driver); -} - -module_init(amazon_asc_init); -module_exit(amazon_asc_cleanup); - -MODULE_AUTHOR("Gary Jennejohn, Felix Fietkau, John Crispin"); -MODULE_DESCRIPTION("MIPS AMAZONASC serial port driver"); -MODULE_LICENSE("GPL"); - diff --git a/target/linux/amazon/files/drivers/watchdog/amazon_wdt.c b/target/linux/amazon/files/drivers/watchdog/amazon_wdt.c deleted file mode 100644 index b18296b794..0000000000 --- a/target/linux/amazon/files/drivers/watchdog/amazon_wdt.c +++ /dev/null @@ -1,277 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Copyright 2004 Wu Qi Ming <gokimi@msn.com> - * Copyright (C) 2007 John Crispin <blogic@openwrt.org> - */ - -#include <linux/version.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/fs.h> -#include <linux/errno.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> -#include <linux/tty.h> -#include <linux/selection.h> -#include <linux/kmod.h> -#include <linux/vmalloc.h> -#include <linux/kdev_t.h> -#include <linux/ioctl.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <linux/platform_device.h> -#include <asm/amazon/amazon.h> -#include <asm/amazon/amazon_wdt.h> - -#define DRV_NAME "AMAZON WDT:" - -#undef AMAZON_WDT_DEBUG - -static int amazon_wdt_isopen = 0; - -#ifdef AMAZON_WDT_DEBUG -static struct proc_dir_entry* amazon_wdt_dir; -#endif - -int wdt_enable(int timeout) -{ - u32 hard_psw, ffpi; - int reload_value, divider = 1; - - ffpi = amazon_get_fpi_hz(); - - reload_value = 65536 - timeout * ffpi / 256; - - if (reload_value < 0) { - divider = 0; - reload_value = 65536 - timeout * ffpi / 16384; - } - - if (reload_value < 0){ - printk(KERN_INFO DRV_NAME "timeout too large %d\n", timeout); - return -EINVAL; - } - - printk(KERN_INFO DRV_NAME "timeout:%d reload_value: %8x\n", timeout, reload_value); - - hard_psw = (amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) + - (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0; - amazon_writel(hard_psw, AMAZON_WDT_CON0); - wmb(); - - amazon_writel((hard_psw & 0xff00) + (reload_value << 16) + 0xf2, AMAZON_WDT_CON0); - wmb(); - - amazon_writel(divider << 2, AMAZON_WDT_CON1); - wmb(); - - hard_psw = (amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) + - (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0; - amazon_writel(hard_psw, AMAZON_WDT_CON0); - wmb(); - - amazon_writel_masked(AMAZON_WDT_CON0, 0xff, 0xf3); - wmb(); - return 0; -} - -void wdt_disable(void) -{ - u32 hard_psw = 0; - - hard_psw = (amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) + - (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0; - amazon_writel(hard_psw, AMAZON_WDT_CON0); - wmb(); - - amazon_writel_masked(AMAZON_WDT_CON0, 0xff, 0xf2); - wmb(); - - amazon_writel_masked(AMAZON_WDT_CON1, 0x8, 0x8); - wmb(); - - hard_psw=(amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) + - (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0; - amazon_writel(hard_psw, AMAZON_WDT_CON0); - wmb(); - - amazon_writel_masked(AMAZON_WDT_CON0, 0xff, 0xf3); - wmb(); - - return; -} - -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36)) -static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -#else -static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) -#endif -{ - int result=0; - static int timeout=-1; - - switch(cmd){ - case AMAZON_WDT_IOC_START: - printk(KERN_INFO DRV_NAME "enable watch dog timer!\n"); - if (copy_from_user((void*)&timeout, (void*)arg, sizeof (int))) { - printk(KERN_INFO DRV_NAME "invalid argument\n"); - result=-EINVAL; - } else if ((result = wdt_enable(timeout)) < 0) { - timeout = -1; - } - break; - - case AMAZON_WDT_IOC_STOP: - printk(KERN_INFO DRV_NAME "disable watch dog timer\n"); - timeout = -1; - wdt_disable(); - break; - - case AMAZON_WDT_IOC_PING: - if (timeout < 0) { - result = -EIO; - } else { - result = wdt_enable(timeout); - } - break; - - default: - result=-EINVAL; - break; - } - return result; -} - -static ssize_t wdt_read(struct file *file, char *buf, size_t count, loff_t *offset) -{ - return 0; -} - -static ssize_t wdt_write(struct file *file, const char *buf, size_t count, loff_t *offset) -{ - return count; -} - -static int wdt_open(struct inode *inode, struct file *file) -{ - if (amazon_wdt_isopen == 1) - return -EBUSY; - - amazon_wdt_isopen = 1; - printk(KERN_INFO DRV_NAME "opened\n"); - return 0; -} - -static int wdt_release(struct inode *inode, struct file *file) -{ - amazon_wdt_isopen = 0; - printk(KERN_INFO DRV_NAME "closed\n"); - return 0; -} - -#ifdef AMAZON_WDT_DEBUG -int wdt_register_proc_read(char *buf, char **start, off_t offset, - int count, int *eof, void *data) -{ - int len=0; - len+=sprintf(buf+len,"NMISR: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_NMISR)); - len+=sprintf(buf+len,"RST_REQ: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_RST_REQ)); - len+=sprintf(buf+len,"RST_SR: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_RST_SR)); - len+=sprintf(buf+len,"WDT_CON0: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_CON0)); - len+=sprintf(buf+len,"WDT_CON1: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_CON1)); - len+=sprintf(buf+len,"WDT_SR: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_SR)); - *eof = 1; - return len; -} -#endif - -static struct file_operations wdt_fops = { - read: wdt_read, - write: wdt_write, -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36)) - unlocked_ioctl: wdt_ioctl, -#else - ioctl: wdt_ioctl, -#endif - open: wdt_open, - release: wdt_release, -}; - -static int amazon_wdt_probe(struct platform_device *dev) -{ - int result = result = register_chrdev(0, "watchdog", &wdt_fops); - - if (result < 0) { - printk(KERN_INFO DRV_NAME "cannot register device\n"); - return result; - } - -#ifdef AMAZON_WDT_DEBUG - amazon_wdt_dir=proc_mkdir("amazon_wdt",NULL); - create_proc_read_entry("wdt_register", 0, amazon_wdt_dir, - wdt_register_proc_read, NULL); -#endif - - amazon_wdt_isopen=0; - printk(KERN_INFO DRV_NAME "driver loaded but inactive\n"); - return 0; -} - -static int amazon_wdt_remove(struct platform_device *dev) -{ - unregister_chrdev(0, "watchdog"); -#ifdef AMAZON_WDT_DEBUG - remove_proc_entry("wdt_register", amazon_wdt_dir); - remove_proc_entry("amazon_wdt", NULL); -#endif - printk(KERN_INFO DRV_NAME "unregistered\n"); - return 0; -} - -static struct platform_driver amazon_wdt_driver = { - .probe = amazon_wdt_probe, - .remove = amazon_wdt_remove, - .driver = { - .name = "amazon_wdt", - .owner = THIS_MODULE, - }, -}; - -static int __init amazon_wdt_init(void) -{ - int ret = platform_driver_register(&amazon_wdt_driver); - if (ret) - printk(KERN_WARNING "amazon_wdt: error registering platfom driver!\n"); - return ret; -} - -static void __exit amazon_wdt_exit(void) -{ - platform_driver_unregister(&amazon_wdt_driver); -} - -module_init(amazon_wdt_init); -module_exit(amazon_wdt_exit); - -MODULE_LICENSE ("GPL"); -MODULE_AUTHOR("Infineon / John Crispin <blogic@openwrt.org>"); -MODULE_DESCRIPTION("AMAZON WDT driver"); - diff --git a/target/linux/amazon/files/include/asm-mips/amazon/adm6996.h b/target/linux/amazon/files/include/asm-mips/amazon/adm6996.h deleted file mode 100644 index 77cf4b131d..0000000000 --- a/target/linux/amazon/files/include/asm-mips/amazon/adm6996.h +++ /dev/null @@ -1,232 +0,0 @@ -/****************************************************************************** - Copyright (c) 2004, Infineon Technologies. All rights reserved. - - No Warranty - Because the program is licensed free of charge, there is no warranty for - the program, to the extent permitted by applicable law. Except when - otherwise stated in writing the copyright holders and/or other parties - provide the program "as is" without warranty of any kind, either - expressed or implied, including, but not limited to, the implied - warranties of merchantability and fitness for a particular purpose. The - entire risk as to the quality and performance of the program is with - you. should the program prove defective, you assume the cost of all - necessary servicing, repair or correction. - - In no event unless required by applicable law or agreed to in writing - will any copyright holder, or any other party who may modify and/or - redistribute the program as permitted above, be liable to you for - damages, including any general, special, incidental or consequential - damages arising out of the use or inability to use the program - (including but not limited to loss of data or data being rendered - inaccurate or losses sustained by you or third parties or a failure of - the program to operate with any other programs), even if such holder or - other party has been advised of the possibility of such damages. - ****************************************************************************** - Module : ifx_swdrv.h - Date : 2004-09-01 - Description : JoeLin - Remarks: - - *****************************************************************************/ - -#ifndef _ADM_6996_MODULE_H_ -#define _ADM_6996_MODULE_H_ - -#include <asm/amazon/amazon.h> - -#define ifx_printf(x) printk x - -/* command codes */ -#define ADM_SW_SMI_READ 0x02 -#define ADM_SW_SMI_WRITE 0x01 -#define ADM_SW_SMI_START 0x01 - -#define ADM_SW_EEPROM_WRITE 0x01 -#define ADM_SW_EEPROM_WRITE_ENABLE 0x03 -#define ADM_SW_EEPROM_WRITE_DISABLE 0x00 -#define EEPROM_TYPE 8 /* for 93C66 */ - -/* bit masks */ -#define ADM_SW_BIT_MASK_1 0x00000001 -#define ADM_SW_BIT_MASK_2 0x00000002 -#define ADM_SW_BIT_MASK_4 0x00000008 -#define ADM_SW_BIT_MASK_10 0x00000200 -#define ADM_SW_BIT_MASK_16 0x00008000 -#define ADM_SW_BIT_MASK_32 0x80000000 - -/* delay timers */ -#define ADM_SW_MDC_DOWN_DELAY 5 -#define ADM_SW_MDC_UP_DELAY 5 -#define ADM_SW_CS_DELAY 5 - -/* MDIO modes */ -#define ADM_SW_MDIO_OUTPUT 1 -#define ADM_SW_MDIO_INPUT 0 - -#define ADM_SW_MAX_PORT_NUM 5 -#define ADM_SW_MAX_VLAN_NUM 15 - -/* registers */ -#define ADM_SW_PORT0_CONF 0x1 -#define ADM_SW_PORT1_CONF 0x3 -#define ADM_SW_PORT2_CONF 0x5 -#define ADM_SW_PORT3_CONF 0x7 -#define ADM_SW_PORT4_CONF 0x8 -#define ADM_SW_PORT5_CONF 0x9 -#define ADM_SW_VLAN_MODE 0x11 -#define ADM_SW_MAC_LOCK 0x12 -#define ADM_SW_VLAN0_CONF 0x13 -#define ADM_SW_PORT0_PVID 0x28 -#define ADM_SW_PORT1_PVID 0x29 -#define ADM_SW_PORT2_PVID 0x2a -#define ADM_SW_PORT34_PVID 0x2b -#define ADM_SW_PORT5_PVID 0x2c -#define ADM_SW_PHY_RESET 0x2f -#define ADM_SW_MISC_CONF 0x30 -#define ADM_SW_BNDWDH_CTL0 0x31 -#define ADM_SW_BNDWDH_CTL1 0x32 -#define ADM_SW_BNDWDH_CTL_ENA 0x33 - -/* port modes */ -#define ADM_SW_PORT_FLOWCTL 0x1 /* 802.3x flow control */ -#define ADM_SW_PORT_AN 0x2 /* auto negotiation */ -#define ADM_SW_PORT_100M 0x4 /* 100M */ -#define ADM_SW_PORT_FULL 0x8 /* full duplex */ -#define ADM_SW_PORT_TAG 0x10 /* output tag on */ -#define ADM_SW_PORT_DISABLE 0x20 /* disable port */ -#define ADM_SW_PORT_TOS 0x40 /* TOS first */ -#define ADM_SW_PORT_PPRI 0x80 /* port based priority first */ -#define ADM_SW_PORT_MDIX 0x8000 /* auto MDIX on */ -#define ADM_SW_PORT_PVID_SHIFT 10 -#define ADM_SW_PORT_PVID_BITS 4 - -/* VLAN */ -#define ADM_SW_VLAN_PORT0 0x1 -#define ADM_SW_VLAN_PORT1 0x2 -#define ADM_SW_VLAN_PORT2 0x10 -#define ADM_SW_VLAN_PORT3 0x40 -#define ADM_SW_VLAN_PORT4 0x80 -#define ADM_SW_VLAN_PORT5 0x100 - - -/* GPIO 012 enabled, output mode */ -#define GPIO_ENABLEBITS 0x000700f8 - -/* - define AMAZON GPIO port to ADM6996 EEPROM interface - MDIO -> EEDI GPIO 16, AMAZON GPIO P1.0, bi-direction - MDC -> EESK GPIO 17, AMAZON GPIO P1.1, output only - MDCS -> EECS GPIO 18, AMAZON GPIO P1.2, output only - EEDO GPIO 15, AMAZON GPIO P0.15, do not need this one! */ - -#define GPIO_MDIO 1 //P1.0 -#define GPIO_MDC 2 //P1.1 -#define GPIO_MDCS 4 //P1.2 - -//joelin #define GPIO_MDIO 0 -//joelin #define GPIO_MDC 5 /* PORT 0 GPIO5 */ -//joelin #define GPIO_MDCS 6 /* PORT 0 GPIO6 */ - - -#define MDIO_INPUT 0x00000001 -#define MDIO_OUTPUT_EN 0x00010000 - - -/* type definitions */ -typedef unsigned char U8; -typedef unsigned short U16; -typedef unsigned int U32; - -typedef struct _REGRW_ -{ - unsigned int addr; - unsigned int value; - unsigned int mode; -}REGRW, *PREGRW; - -//joelin adm6996i -typedef struct _MACENTRY_ -{ - unsigned char mac_addr[6]; - unsigned long fid:4; - unsigned long portmap:6; - union { - unsigned long age_timer:9; - unsigned long info_ctrl:9; - } ctrl; - unsigned long occupy:1; - unsigned long info_type:1; - unsigned long bad:1; - unsigned long result:3;//000:command ok ,001:all entry used,010:Entry Not found ,011:try next entry ,101:command error - - }MACENTRY, *PMACENTRY; -typedef struct _PROTOCOLFILTER_ -{ - int protocol_filter_num;//[0~7] - int ip_p; //Value Compared with Protocol in IP Heade[7:0] - char action:2;//Action for protocol Filter . -//00 = Protocol Portmap is Default Output Ports. -//01 = Protocol Portmap is 6'b0. -//10 = Protocol Portmap is the CPU port if the incoming port -//is not the CPU port. But if the incoming port is the CPU port, then Type Portmap contains Default Output Ports, excluding the CPU port. - }PROTOCOLFILTER, *PPROTOCOLFILTER; - -//joelin adm6996i - -/* Santosh: for IGMP proxy/snooping */ - -//050614:fchang int adm_process_mac_table_request (unsigned int cmd, struct _MACENTRY_ *mac); -//050614:fchang int adm_process_protocol_filter_request (unsigned int cmd, struct _PROTOCOLFILTER_ *filter); - - -/* IOCTL keys */ -#define KEY_IOCTL_ADM_REGRW 0x01 -#define KEY_IOCTL_ADM_SW_REGRW 0x02 -#define KEY_IOCTL_ADM_SW_PORTSTS 0x03 -#define KEY_IOCTL_ADM_SW_INIT 0x04 -//for adm6996i-start -#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_ADD 0x05 -#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_DEL 0x06 -#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_INIT 0x07 -#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_MORE 0x08 -#define KEY_IOCTL_ADM_SW_IOCTL_FILTER_ADD 0x09 -#define KEY_IOCTL_ADM_SW_IOCTL_FILTER_DEL 0x0a -#define KEY_IOCTL_ADM_SW_IOCTL_FILTER_GET 0x0b - -//adm6996i #define KEY_IOCTL_MAX_KEY 0x05 -#define KEY_IOCTL_MAX_KEY 0x0c -//for adm6996i-end -/* IOCTL MAGIC */ -#define ADM_MAGIC ('a'|'d'|'m'|'t'|'e'|'k') - -/* IOCTL parameters */ -#define ADM_IOCTL_REGRW _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_REGRW, REGRW) -#define ADM_SW_IOCTL_REGRW _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_REGRW, REGRW) -#define ADM_SW_IOCTL_PORTSTS _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_PORTSTS, NULL) -#define ADM_SW_IOCTL_INIT _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_INIT, NULL) - - -//6996i-stat -#define ADM_SW_IOCTL_MACENTRY_ADD _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_ADD,MACENTRY) -#define ADM_SW_IOCTL_MACENTRY_DEL _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_DEL,MACENTRY) -#define ADM_SW_IOCTL_MACENTRY_GET_INIT _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_INIT,MACENTRY) -#define ADM_SW_IOCTL_MACENTRY_GET_MORE _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_MORE,MACENTRY) -#define ADM_SW_IOCTL_FILTER_ADD _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_FILTER_ADD,PROTOCOLFILTER) -#define ADM_SW_IOCTL_FILTER_DEL _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_FILTER_DEL,PROTOCOLFILTER) -#define ADM_SW_IOCTL_FILTER_GET _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_FILTER_GET,PROTOCOLFILTER) - -//6996i-end - - -#define REG_READ 0x0 -#define REG_WRITE 0x1 - -/* undefine symbol */ -#define AMAZON_SW_REG(reg) *((volatile U32*)(reg)) -//#define GPIO0_INPUT_MASK 0 -//#define GPIO_conf0_REG 0x12345678 -//#define GPIO_SET_HI -//#define GPIO_SET_LOW - -#endif -/* _ADM_6996_MODULE_H_ */ diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon.h deleted file mode 100644 index 28af7f59d2..0000000000 --- a/target/linux/amazon/files/include/asm-mips/amazon/amazon.h +++ /dev/null @@ -1,1447 +0,0 @@ -#ifndef AMAZON_H -#define AMAZON_H -/****************************************************************************** - Copyright (c) 2002, Infineon Technologies. All rights reserved. - - No Warranty - Because the program is licensed free of charge, there is no warranty for - the program, to the extent permitted by applicable law. Except when - otherwise stated in writing the copyright holders and/or other parties - provide the program "as is" without warranty of any kind, either - expressed or implied, including, but not limited to, the implied - warranties of merchantability and fitness for a particular purpose. The - entire risk as to the quality and performance of the program is with - you. should the program prove defective, you assume the cost of all - necessary servicing, repair or correction. - - In no event unless required by applicable law or agreed to in writing - will any copyright holder, or any other party who may modify and/or - redistribute the program as permitted above, be liable to you for - damages, including any general, special, incidental or consequential - damages arising out of the use or inability to use the program - (including but not limited to loss of data or data being rendered - inaccurate or losses sustained by you or third parties or a failure of - the program to operate with any other programs), even if such holder or - other party has been advised of the possibility of such damages. -******************************************************************************/ - -#define amazon_readl(a) __raw_readl(((u32*)(a))) -#define amazon_writel(a,b) __raw_writel(a, ((u32*)(b))) -#define amazon_writel_masked(a,b,c) __raw_writel((__raw_readl(((u32*)(a))) & ~b) | (c & b), ((u32*)(a))) - -unsigned int amazon_get_fpi_hz(void); - -#define IOPORT_RESOURCE_START 0x10000000 -#define IOPORT_RESOURCE_END 0xffffffff -#define IOMEM_RESOURCE_START 0x10000000 -#define IOMEM_RESOURCE_END 0xffffffff - -/* check ADSL link status */ -#define AMAZON_CHECK_LINK - -/***********************************************************************/ -/* Module : WDT register address and bits */ -/***********************************************************************/ - -#define AMAZON_WDT (KSEG1+0x10100900) -/***********************************************************************/ - -/***Reset Request Register***/ -#define AMAZON_RST_REQ ((volatile u32*)(AMAZON_WDT+ 0x0010)) -#define AMAZON_RST_REQ_PLL (1 << 31) -#define AMAZON_RST_REQ_PCI_CORE (1 << 13) -#define AMAZON_RST_REQ_TPE (1 << 12) -#define AMAZON_RST_REQ_AFE (1 << 11) -#define AMAZON_RST_REQ_DMA (1 << 9) -#define AMAZON_RST_REQ_SWITCH (1 << 8) -#define AMAZON_RST_REQ_DFE (1 << 7) -#define AMAZON_RST_REQ_PHY (1 << 5) -#define AMAZON_RST_REQ_PCI (1 << 4) -#define AMAZON_RST_REQ_FPI (1 << 2) -#define AMAZON_RST_REQ_CPU (1 << 1) -#define AMAZON_RST_REQ_HRST (1 << 0) -#define AMAZON_RST_ALL (AMAZON_RST_REQ_PLL \ - |AMAZON_RST_REQ_PCI_CORE \ - |AMAZON_RST_REQ_TPE \ - |AMAZON_RST_REQ_AFE \ - |AMAZON_RST_REQ_DMA \ - |AMAZON_RST_REQ_SWITCH \ - |AMAZON_RST_REQ_DFE \ - |AMAZON_RST_REQ_PHY \ - |AMAZON_RST_REQ_PCI \ - |AMAZON_RST_REQ_FPI \ - |AMAZON_RST_REQ_CPU \ - |AMAZON_RST_REQ_HRST) - -/***Reset Status Register Power On***/ -#define AMAZON_RST_SR ((volatile u32*)(AMAZON_WDT+ 0x0014)) - -/***Watchdog Timer Control Register 0***/ -#define AMAZON_WDT_CON0 ((volatile u32*)(AMAZON_WDT+ 0x0020)) - -/***Watchdog Timer Control Register 1***/ -#define AMAZON_WDT_CON1 ((volatile u32*)(AMAZON_WDT+ 0x0024)) -#define AMAZON_WDT_CON1_WDTDR (1 << 3) -#define AMAZON_WDT_CON1_WDTIR (1 << 2) - -/***Watchdog Timer Status Register***/ -#define AMAZON_WDT_SR ((volatile u32*)(AMAZON_WDT+ 0x0028)) -#define AMAZON_WDT_SR_WDTTIM(value) (((( 1 << 16) - 1) & (value)) << 16) -#define AMAZON_WDT_SR_WDTPR (1 << 5) -#define AMAZON_WDT_SR_WDTTO (1 << 4) -#define AMAZON_WDT_SR_WDTDS (1 << 3) -#define AMAZON_WDT_SR_WDTIS (1 << 2) -#define AMAZON_WDT_SR_WDTOE (1 << 1) -#define AMAZON_WDT_SR_WDTAE (1 << 0) - -/***NMI Status Register***/ -#define AMAZON_WDT_NMISR ((volatile u32*)(AMAZON_WDT+ 0x002C)) -#define AMAZON_WDT_NMISR_NMIWDT (1 << 2) -#define AMAZON_WDT_NMISR_NMIPLL (1 << 1) -#define AMAZON_WDT_NMISR_NMIEXT (1 << 0) - -#define AMAZON_WDT_RST_MON ((volatile u32*)(AMAZON_WDT+ 0x0030)) - -/***********************************************************************/ -/* Module : MCD register address and bits */ -/***********************************************************************/ -#define AMAZON_MCD (KSEG1+0x1F106000) - -/***Manufacturer Identification Register***/ -#define AMAZON_MCD_MANID ((volatile u32*)(AMAZON_MCD+ 0x0024)) -#define AMAZON_MCD_MANID_MANUF(value) (((( 1 << 11) - 1) & (value)) << 5) - -/***Chip Identification Register***/ -#define AMAZON_MCD_CHIPID ((volatile u32*)(AMAZON_MCD+ 0x0028)) -#define AMAZON_MCD_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1)) -#define AMAZON_MCD_CHIPID_VERSION_SET(value) (((( 1 << 4) - 1) & (value)) << 28) -#define AMAZON_MCD_CHIPID_PART_NUMBER_GET(value) (((value) >> 12) & ((1 << 16) - 1)) -#define AMAZON_MCD_CHIPID_PART_NUMBER_SET(value) (((( 1 << 16) - 1) & (value)) << 12) -#define AMAZON_MCD_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 11) - 1)) -#define AMAZON_MCD_CHIPID_MANID_SET(value) (((( 1 << 11) - 1) & (value)) << 1) - -#define AMAZON_CHIPID_STANDARD 0x00EB -#define AMAZON_CHIPID_YANGTSE 0x00ED - -/***Redesign Tracing Identification Register***/ -#define AMAZON_MCD_RTID ((volatile u32*)(AMAZON_MCD+ 0x002C)) -#define AMAZON_MCD_RTID_LC (1 << 15) -#define AMAZON_MCD_RTID_RIX(value) (((( 1 << 3) - 1) & (value)) << 0) - - -/***********************************************************************/ -/* Module : CGU register address and bits */ -/***********************************************************************/ - -#define AMAZON_CGU (KSEG1+0x1F103000) -/***********************************************************************/ - -/***CGU Clock Divider Select Register***/ -#define AMAZON_CGU_DIV (AMAZON_CGU + 0x0000) -/***CGU PLL0 Status Register***/ -#define AMAZON_CGU_PLL0SR (AMAZON_CGU + 0x0004) -/***CGU PLL1 Status Register***/ -#define AMAZON_CGU_PLL1SR (AMAZON_CGU + 0x0008) -/***CGU Interface Clock Control Register***/ -#define AMAZON_CGU_IFCCR (AMAZON_CGU + 0x000c) -/***CGU Oscillator Control Register***/ -#define AMAZON_CGU_OSCCR (AMAZON_CGU + 0x0010) -/***CGU Memory Clock Delay Register***/ -#define AMAZON_CGU_MCDEL (AMAZON_CGU + 0x0014) -/***CGU CPU Clock Reduction Register***/ -#define AMAZON_CGU_CPUCRD (AMAZON_CGU + 0x0018) -/***CGU Test Register**/ -#define AMAZON_CGU_TST (AMAZON_CGU + 0x003c) - -/***********************************************************************/ -/* Module : PMU register address and bits */ -/***********************************************************************/ - -#define AMAZON_PMU AMAZON_CGU -/***********************************************************************/ - - -/***PMU Power Down Control Register***/ -#define AMAZON_PMU_PWDCR ((volatile u32*)(AMAZON_PMU+ 0x001c)) -#define AMAZON_PMU_PWDCR_TPE (1 << 13) -#define AMAZON_PMU_PWDCR_PLL (1 << 12) -#define AMAZON_PMU_PWDCR_XTAL (1 << 11) -#define AMAZON_PMU_PWDCR_EBU (1 << 10) -#define AMAZON_PMU_PWDCR_DFE (1 << 9) -#define AMAZON_PMU_PWDCR_SPI (1 << 8) -#define AMAZON_PMU_PWDCR_UART (1 << 7) -#define AMAZON_PMU_PWDCR_GPT (1 << 6) -#define AMAZON_PMU_PWDCR_DMA (1 << 5) -#define AMAZON_PMU_PWDCR_PCI (1 << 4) -#define AMAZON_PMU_PWDCR_SW (1 << 3) -#define AMAZON_PMU_PWDCR_IOR (1 << 2) -#define AMAZON_PMU_PWDCR_FPI (1 << 1) -#define AMAZON_PMU_PWDCR_EPHY (1 << 0) - -/***PMU Status Register***/ -#define AMAZON_PMU_SR ((volatile u32*)(AMAZON_PMU+ 0x0020)) -#define AMAZON_PMU_SR_TPE (1 << 13) -#define AMAZON_PMU_SR_PLL (1 << 12) -#define AMAZON_PMU_SR_XTAL (1 << 11) -#define AMAZON_PMU_SR_EBU (1 << 10) -#define AMAZON_PMU_SR_DFE (1 << 9) -#define AMAZON_PMU_SR_SPI (1 << 8) -#define AMAZON_PMU_SR_UART (1 << 7) -#define AMAZON_PMU_SR_GPT (1 << 6) -#define AMAZON_PMU_SR_DMA (1 << 5) -#define AMAZON_PMU_SR_PCI (1 << 4) -#define AMAZON_PMU_SR_SW (1 << 3) -#define AMAZON_PMU_SR_IOR (1 << 2) -#define AMAZON_PMU_SR_FPI (1 << 1) -#define AMAZON_PMU_SR_EPHY (1 << 0) - -/***********************************************************************/ -/* Module : BCU register address and bits */ -/***********************************************************************/ - -#define AMAZON_BCU (KSEG1+0x10100000) -/***********************************************************************/ - - -/***BCU Control Register (0010H)***/ -#define AMAZON_BCU_CON ((volatile u32*)(AMAZON_BCU+ 0x0010)) -#define AMAZON_BCU_CON_SPC(value) (((( 1 << 8) - 1) & (value)) << 24) -#define AMAZON_BCU_CON_SPE (1 << 19) -#define AMAZON_BCU_CON_PSE (1 << 18) -#define AMAZON_BCU_CON_DBG (1 << 16) -#define AMAZON_BCU_CON_TOUT(value) (((( 1 << 16) - 1) & (value)) << 0) - -/***BCU Error Control Capture Register (0020H)***/ -#define AMAZON_BCU_ECON ((volatile u32*)(AMAZON_BCU+ 0x0020)) -#define AMAZON_BCU_ECON_TAG(value) (((( 1 << 4) - 1) & (value)) << 24) -#define AMAZON_BCU_ECON_RDN (1 << 23) -#define AMAZON_BCU_ECON_WRN (1 << 22) -#define AMAZON_BCU_ECON_SVM (1 << 21) -#define AMAZON_BCU_ECON_ACK(value) (((( 1 << 2) - 1) & (value)) << 19) -#define AMAZON_BCU_ECON_ABT (1 << 18) -#define AMAZON_BCU_ECON_RDY (1 << 17) -#define AMAZON_BCU_ECON_TOUT (1 << 16) -#define AMAZON_BCU_ECON_ERRCNT(value) (((( 1 << 16) - 1) & (value)) << 0) -#define AMAZON_BCU_ECON_OPC(value) (((( 1 << 4) - 1) & (value)) << 28) - -/***BCU Error Address Capture Register (0024 H)***/ -#define AMAZON_BCU_EADD ((volatile u32*)(AMAZON_BCU+ 0x0024)) -#define AMAZON_BCU_EADD_FPIADR - -/***BCU Error Data Capture Register (0028H)***/ -#define AMAZON_BCU_EDAT ((volatile u32*)(AMAZON_BCU+ 0x0028)) -#define AMAZON_BCU_EDAT_FPIDAT - -/***********************************************************************/ -/* Module : Switch register address and bits */ -/***********************************************************************/ - -#define AMAZON_SWITCH (KSEG1+0x10106000) -/***********************************************************************/ -#define AMAZON_SW_UN_DEST AMAZON_SWITCH+0x00 /*Unknown destination register*/ -#define AMAZON_SW_VLAN_CTRL AMAZON_SWITCH+0x04 /*VLAN control register*/ -#define AMAZON_SW_PS_CTL AMAZON_SWITCH+0x08 /*port status control register*/ -#define AMAZON_SW_COS_CTL AMAZON_SWITCH+0x0c /*Cos control register*/ -#define AMAZON_SW_VLAN_COS AMAZON_SWITCH+0x10 /*VLAN priority cos mapping register*/ -#define AMAZON_SW_DSCP_COS3 AMAZON_SWITCH+0x14 /*DSCP cos mapping register3*/ -#define AMAZON_SW_DSCP_COS2 AMAZON_SWITCH+0x18 /*DSCP cos mapping register2*/ -#define AMAZON_SW_DSCP_COS1 AMAZON_SWITCH+0x1c /*DSCP cos mapping register1*/ -#define AMAZON_SW_DSCP_COS0 AMAZON_SWITCH+0x20 /*DSCP cos mapping register*/ -#define AMAZON_SW_ARL_CTL AMAZON_SWITCH+0x24 /*ARL control register*/ -#define AMAZON_SW_PKT_LEN AMAZON_SWITCH+0x28 /*packet length register*/ -#define AMAZON_SW_CPU_ACTL AMAZON_SWITCH+0x2c /*CPU control register1*/ -#define AMAZON_SW_DATA1 AMAZON_SWITCH+0x30 /*CPU access control register1*/ -#define AMAZON_SW_DATA2 AMAZON_SWITCH+0x34 /*CPU access control register2*/ -#define AMAZON_SW_P2_PCTL AMAZON_SWITCH+0x38 /*Port2 control register*/ -#define AMAZON_SW_P0_TX_CTL AMAZON_SWITCH+0x3c /*port0 TX control register*/ -#define AMAZON_SW_P1_TX_CTL AMAZON_SWITCH+0x40 /*port 1 TX control register*/ -#define AMAZON_SW_P0_WM AMAZON_SWITCH+0x44 /*port 0 watermark control register*/ -#define AMAZON_SW_P1_WM AMAZON_SWITCH+0x48 /*port 1 watermark control register*/ -#define AMAZON_SW_P2_WM AMAZON_SWITCH+0x4c /*port 2 watermark control register*/ -#define AMAZON_SW_GBL_WM AMAZON_SWITCH+0x50 /*Global watermark register*/ -#define AMAZON_SW_PM_CTL AMAZON_SWITCH+0x54 /*PM control register*/ -#define AMAZON_SW_P2_CTL AMAZON_SWITCH+0x58 /*PMAC control register*/ -#define AMAZON_SW_P2_TX_IPG AMAZON_SWITCH+0x5c /*port2 TX IPG control register*/ -#define AMAZON_SW_P2_RX_IPG AMAZON_SWITCH+0x60 /*prot2 RX IPG control register*/ -#define AMAZON_SW_MDIO_ACC AMAZON_SWITCH+0x64 /*MDIO access register*/ -#define AMAZON_SW_EPHY AMAZON_SWITCH+0x68 /*Ethernet PHY register*/ -#define AMAZON_SW_MDIO_CFG AMAZON_SWITCH+0x6c /*MDIO configuration register*/ -#define AMAZON_SW_P0_RCV_DROP_CNT AMAZON_SWITCH+0x70 /*port0 receive drop counter */ -#define AMAZON_SW_P0_RCV_FRAME_ERR_CNT AMAZON_SWITCH+0x74 /*port0 receive frame error conter*/ -#define AMAZON_SW_P0_TX_COLL_CNT AMAZON_SWITCH+0x78 /*port0 transmit collision counter*/ -#define AMAZON_SW_P0_TX_DROP_CNT AMAZON_SWITCH+0x7c /*port1 transmit drop counter*/ -#define AMAZON_SW_P1_RCV_DROP_CNT AMAZON_SWITCH+0x80 /*port1 receive drop counter*/ -#define AMAZON_SW_P1_RCV_FRAME_ERR_CNT AMAZON_SWITCH+0x84 /*port1 receive error counter*/ -#define AMAZON_SW_P1_TX_COLL_CNT AMAZON_SWITCH+0x88 /*port1 transmit collision counter*/ -#define AMAZON_SW_P1_TX_DROP_CNT AMAZON_SWITCH+0x8c /*port1 transmit drop counter*/ - - - -/***********************************************************************/ -/* Module : SSC register address and bits */ -/***********************************************************************/ -#define AMAZON_SSC_BASE_ADD_0 (KSEG1+0x10100800) - -/*165001:henryhsu:20050603:Source add by Bing Tao*/ - -/*configuration/Status Registers in Bus Clock Domain*/ -#define AMAZON_SSC_CLC ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0000)) -#define AMAZON_SSC_ID ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0008)) -#define AMAZON_SSC_CON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0010)) -#define AMAZON_SSC_STATE ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0014)) -#define AMAZON_SSC_WHBSTATE ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0018)) -#define AMAZON_SSC_TB ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0020)) -#define AMAZON_SSC_RB ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0024)) -#define AMAZON_SSC_FSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0038)) - -/*Configuration/Status Registers in Kernel Clock Domain*/ -#define AMAZON_SSC_PISEL ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0004)) -#define AMAZON_SSC_RXFCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0030)) -#define AMAZON_SSC_TXFCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0034)) -#define AMAZON_SSC_BR ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0040)) -#define AMAZON_SSC_BRSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0044)) -#define AMAZON_SSC_SFCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0060)) -#define AMAZON_SSC_SFSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0064)) -#define AMAZON_SSC_GPOCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0070)) -#define AMAZON_SSC_GPOSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0074)) -#define AMAZON_SSC_WHBGPOSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0078)) -#define AMAZON_SSC_RXREQ ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0080)) -#define AMAZON_SSC_RXCNT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0084)) - -/*DMA Registers in Bus Clock Domain*/ -#define AMAZON_SSC_DMA_CON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00ec)) - -/*interrupt Node Registers in Bus Clock Domain*/ -#define AMAZON_SSC_IRNEN ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00F4)) -#define AMAZON_SSC_IRNICR ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00FC)) -#define AMAZON_SSC_IRNCR ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00F8)) - -/*165001*/ - -/***********************************************************************/ - - - -/***********************************************************************/ -/* Module : EBU register address and bits */ -/***********************************************************************/ - -#define AMAZON_EBU (KSEG1+0x10105300) -/***********************************************************************/ - - -/***EBU Clock Control Register***/ -#define AMAZON_EBU_CLC ((volatile u32*)(AMAZON_EBU+ 0x0000)) -#define AMAZON_EBU_CLC_DISS (1 << 1) -#define AMAZON_EBU_CLC_DISR (1 << 0) - -/***EBU Global Control Register***/ -#define AMAZON_EBU_CON ((volatile u32*)(AMAZON_EBU+ 0x0010)) -#define AMAZON_EBU_CON_DTACS(value) (((( 1 << 3) - 1) & (value)) << 20) -#define AMAZON_EBU_CON_DTARW(value) (((( 1 << 3) - 1) & (value)) << 16) -#define AMAZON_EBU_CON_TOUTC(value) (((( 1 << 8) - 1) & (value)) << 8) -#define AMAZON_EBU_CON_ARBMODE(value) (((( 1 << 2) - 1) & (value)) << 6) -#define AMAZON_EBU_CON_ARBSYNC (1 << 5) -#define AMAZON_EBU_CON_1 (1 << 3) - -/***EBU Address Select Register 0***/ -#define AMAZON_EBU_ADDSEL0 ((volatile u32*)(AMAZON_EBU+ 0x0020)) -#define AMAZON_EBU_ADDSEL0_BASE(value) (((( 1 << 20) - 1) & (value)) << 12) -#define AMAZON_EBU_ADDSEL0_MASK(value) (((( 1 << 4) - 1) & (value)) << 4) -#define AMAZON_EBU_ADDSEL0_MIRRORE (1 << 1) -#define AMAZON_EBU_ADDSEL0_REGEN (1 << 0) - -/***EBU Address Select Register 1***/ -#define AMAZON_EBU_ADDSEL1 ((volatile u32*)(AMAZON_EBU+ 0x0024)) -#define AMAZON_EBU_ADDSEL1_BASE(value) (((( 1 << 20) - 1) & (value)) << 12) -#define AMAZON_EBU_ADDSEL1_MASK(value) (((( 1 << 4) - 1) & (value)) << 4) -#define AMAZON_EBU_ADDSEL1_MIRRORE (1 << 1) -#define AMAZON_EBU_ADDSEL1_REGEN (1 << 0) - -/***EBU Address Select Register 2***/ -#define AMAZON_EBU_ADDSEL2 ((volatile u32*)(AMAZON_EBU+ 0x0028)) -#define AMAZON_EBU_ADDSEL2_BASE(value) (((( 1 << 20) - 1) & (value)) << 12) -#define AMAZON_EBU_ADDSEL2_MASK(value) (((( 1 << 4) - 1) & (value)) << 4) -#define AMAZON_EBU_ADDSEL2_MIRRORE (1 << 1) -#define AMAZON_EBU_ADDSEL2_REGEN (1 << 0) - -/***EBU Bus Configuration Register 0***/ -#define AMAZON_EBU_BUSCON0 ((volatile u32*)(AMAZON_EBU+ 0x0060)) -#define AMAZON_EBU_BUSCON0_WRDIS (1 << 31) -#define AMAZON_EBU_BUSCON0_ALEC(value) (((( 1 << 2) - 1) & (value)) << 29) -#define AMAZON_EBU_BUSCON0_BCGEN(value) (((( 1 << 2) - 1) & (value)) << 27) -#define AMAZON_EBU_BUSCON0_AGEN(value) (((( 1 << 2) - 1) & (value)) << 24) -#define AMAZON_EBU_BUSCON0_CMULTR(value) (((( 1 << 2) - 1) & (value)) << 22) -#define AMAZON_EBU_BUSCON0_WAIT(value) (((( 1 << 2) - 1) & (value)) << 20) -#define AMAZON_EBU_BUSCON0_WAITINV (1 << 19) -#define AMAZON_EBU_BUSCON0_SETUP (1 << 18) -#define AMAZON_EBU_BUSCON0_PORTW(value) (((( 1 << 2) - 1) & (value)) << 16) -#define AMAZON_EBU_BUSCON0_WAITRDC(value) (((( 1 << 7) - 1) & (value)) << 9) -#define AMAZON_EBU_BUSCON0_WAITWRC(value) (((( 1 << 3) - 1) & (value)) << 6) -#define AMAZON_EBU_BUSCON0_HOLDC(value) (((( 1 << 2) - 1) & (value)) << 4) -#define AMAZON_EBU_BUSCON0_RECOVC(value) (((( 1 << 2) - 1) & (value)) << 2) -#define AMAZON_EBU_BUSCON0_CMULT(value) (((( 1 << 2) - 1) & (value)) << 0) - -/***EBU Bus Configuration Register 1***/ -#define AMAZON_EBU_BUSCON1 ((volatile u32*)(AMAZON_EBU+ 0x0064)) -#define AMAZON_EBU_BUSCON1_WRDIS (1 << 31) -#define AMAZON_EBU_BUSCON1_ALEC(value) (((( 1 << 2) - 1) & (value)) << 29) -#define AMAZON_EBU_BUSCON1_BCGEN(value) (((( 1 << 2) - 1) & (value)) << 27) -#define AMAZON_EBU_BUSCON1_AGEN(value) (((( 1 << 2) - 1) & (value)) << 24) -#define AMAZON_EBU_BUSCON1_CMULTR(value) (((( 1 << 2) - 1) & (value)) << 22) -#define AMAZON_EBU_BUSCON1_WAIT(value) (((( 1 << 2) - 1) & (value)) << 20) -#define AMAZON_EBU_BUSCON1_WAITINV (1 << 19) -#define AMAZON_EBU_BUSCON1_SETUP (1 << 18) -#define AMAZON_EBU_BUSCON1_PORTW(value) (((( 1 << 2) - 1) & (value)) << 16) -#define AMAZON_EBU_BUSCON1_WAITRDC(value) (((( 1 << 7) - 1) & (value)) << 9) -#define AMAZON_EBU_BUSCON1_WAITWRC(value) (((( 1 << 3) - 1) & (value)) << 6) -#define AMAZON_EBU_BUSCON1_HOLDC(value) (((( 1 << 2) - 1) & (value)) << 4) -#define AMAZON_EBU_BUSCON1_RECOVC(value) (((( 1 << 2) - 1) & (value)) << 2) -#define AMAZON_EBU_BUSCON1_CMULT(value) (((( 1 << 2) - 1) & (value)) << 0) - -/***EBU Bus Configuration Register 2***/ -#define AMAZON_EBU_BUSCON2 ((volatile u32*)(AMAZON_EBU+ 0x0068)) -#define AMAZON_EBU_BUSCON2_WRDIS (1 << 31) -#define AMAZON_EBU_BUSCON2_ALEC(value) (((( 1 << 2) - 1) & (value)) << 29) -#define AMAZON_EBU_BUSCON2_BCGEN(value) (((( 1 << 2) - 1) & (value)) << 27) -#define AMAZON_EBU_BUSCON2_AGEN(value) (((( 1 << 2) - 1) & (value)) << 24) -#define AMAZON_EBU_BUSCON2_CMULTR(value) (((( 1 << 2) - 1) & (value)) << 22) -#define AMAZON_EBU_BUSCON2_WAIT(value) (((( 1 << 2) - 1) & (value)) << 20) -#define AMAZON_EBU_BUSCON2_WAITINV (1 << 19) -#define AMAZON_EBU_BUSCON2_SETUP (1 << 18) -#define AMAZON_EBU_BUSCON2_PORTW(value) (((( 1 << 2) - 1) & (value)) << 16) -#define AMAZON_EBU_BUSCON2_WAITRDC(value) (((( 1 << 7) - 1) & (value)) << 9) -#define AMAZON_EBU_BUSCON2_WAITWRC(value) (((( 1 << 3) - 1) & (value)) << 6) -#define AMAZON_EBU_BUSCON2_HOLDC(value) (((( 1 << 2) - 1) & (value)) << 4) -#define AMAZON_EBU_BUSCON2_RECOVC(value) (((( 1 << 2) - 1) & (value)) << 2) -#define AMAZON_EBU_BUSCON2_CMULT(value) (((( 1 << 2) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : SDRAM register address and bits */ -/***********************************************************************/ - -#define AMAZON_SDRAM (KSEG1+0x1F800000) -/***********************************************************************/ - - -/***MC Access Error Cause Register***/ -#define AMAZON_SDRAM_MC_ERRCAUSE ((volatile u32*)(AMAZON_SDRAM+ 0x0010)) -#define AMAZON_SDRAM_MC_ERRCAUSE_ERR (1 << 31) -#define AMAZON_SDRAM_MC_ERRCAUSE_PORT(value) (((( 1 << 4) - 1) & (value)) << 16) -#define AMAZON_SDRAM_MC_ERRCAUSE_CAUSE(value) (((( 1 << 2) - 1) & (value)) << 0) -#define AMAZON_SDRAM_MC_ERRCAUSE_Res(value) (((( 1 << NaN) - 1) & (value)) << NaN) - -/***MC Access Error Address Register***/ -#define AMAZON_SDRAM_MC_ERRADDR ((volatile u32*)(AMAZON_SDRAM+ 0x0020)) -#define AMAZON_SDRAM_MC_ERRADDR_ADDR - -/***MC I/O General Purpose Register***/ -#define AMAZON_SDRAM_MC_IOGP ((volatile u32*)(AMAZON_SDRAM+ 0x0100)) -#define AMAZON_SDRAM_MC_IOGP_GPR6(value) (((( 1 << 4) - 1) & (value)) << 28) -#define AMAZON_SDRAM_MC_IOGP_GPR5(value) (((( 1 << 4) - 1) & (value)) << 24) -#define AMAZON_SDRAM_MC_IOGP_GPR4(value) (((( 1 << 4) - 1) & (value)) << 20) -#define AMAZON_SDRAM_MC_IOGP_GPR3(value) (((( 1 << 4) - 1) & (value)) << 16) -#define AMAZON_SDRAM_MC_IOGP_GPR2(value) (((( 1 << 4) - 1) & (value)) << 12) -#define AMAZON_SDRAM_MC_IOGP_CPS (1 << 11) -#define AMAZON_SDRAM_MC_IOGP_CLKDELAY(value) (((( 1 << 3) - 1) & (value)) << 8) -#define AMAZON_SDRAM_MC_IOGP_CLKRAT(value) (((( 1 << 4) - 1) & (value)) << 4) -#define AMAZON_SDRAM_MC_IOGP_RDDEL(value) (((( 1 << 4) - 1) & (value)) << 0) - -/***MC Self Refresh Register***/ -#define AMAZON_SDRAM_MC_SELFRFSH ((volatile u32*)(AMAZON_SDRAM+ 0x01A0)) -#define AMAZON_SDRAM_MC_SELFRFSH_PWDS (1 << 1) -#define AMAZON_SDRAM_MC_SELFRFSH_PWD (1 << 0) -#define AMAZON_SDRAM_MC_SELFRFSH_Res(value) (((( 1 << 30) - 1) & (value)) << 2) - -/***MC Enable Register***/ -#define AMAZON_SDRAM_MC_CTRLENA ((volatile u32*)(AMAZON_SDRAM+ 0x0110)) -#define AMAZON_SDRAM_MC_CTRLENA_ENA (1 << 0) -#define AMAZON_SDRAM_MC_CTRLENA_Res(value) (((( 1 << 31) - 1) & (value)) << 1) - -/***MC Mode Register Setup Code***/ -#define AMAZON_SDRAM_MC_MRSCODE ((volatile u32*)(AMAZON_SDRAM+ 0x0120)) -#define AMAZON_SDRAM_MC_MRSCODE_UMC(value) (((( 1 << 5) - 1) & (value)) << 7) -#define AMAZON_SDRAM_MC_MRSCODE_CL(value) (((( 1 << 3) - 1) & (value)) << 4) -#define AMAZON_SDRAM_MC_MRSCODE_WT (1 << 3) -#define AMAZON_SDRAM_MC_MRSCODE_BL(value) (((( 1 << 3) - 1) & (value)) << 0) - -/***MC Configuration Data-word Width Register***/ -#define AMAZON_SDRAM_MC_CFGDW ((volatile u32*)(AMAZON_SDRAM+ 0x0130)) -#define AMAZON_SDRAM_MC_CFGDW_DW(value) (((( 1 << 4) - 1) & (value)) << 0) -#define AMAZON_SDRAM_MC_CFGDW_Res(value) (((( 1 << 28) - 1) & (value)) << 4) - -/***MC Configuration Physical Bank 0 Register***/ -#define AMAZON_SDRAM_MC_CFGPB0 ((volatile u32*)(AMAZON_SDRAM+ 0x140)) -#define AMAZON_SDRAM_MC_CFGPB0_MCSEN0(value) (((( 1 << 4) - 1) & (value)) << 12) -#define AMAZON_SDRAM_MC_CFGPB0_BANKN0(value) (((( 1 << 4) - 1) & (value)) << 8) -#define AMAZON_SDRAM_MC_CFGPB0_ROWW0(value) (((( 1 << 4) - 1) & (value)) << 4) -#define AMAZON_SDRAM_MC_CFGPB0_COLW0(value) (((( 1 << 4) - 1) & (value)) << 0) -#define AMAZON_SDRAM_MC_CFGPB0_Res(value) (((( 1 << 16) - 1) & (value)) << 16) - -/***MC Latency Register***/ -#define AMAZON_SDRAM_MC_LATENCY ((volatile u32*)(AMAZON_SDRAM+ 0x0180)) -#define AMAZON_SDRAM_MC_LATENCY_TRP(value) (((( 1 << 4) - 1) & (value)) << 16) -#define AMAZON_SDRAM_MC_LATENCY_TRAS(value) (((( 1 << 4) - 1) & (value)) << 12) -#define AMAZON_SDRAM_MC_LATENCY_TRCD(value) (((( 1 << 4) - 1) & (value)) << 8) -#define AMAZON_SDRAM_MC_LATENCY_TDPL(value) (((( 1 << 4) - 1) & (value)) << 4) -#define AMAZON_SDRAM_MC_LATENCY_TDAL(value) (((( 1 << 4) - 1) & (value)) << 0) -#define AMAZON_SDRAM_MC_LATENCY_Res(value) (((( 1 << 12) - 1) & (value)) << 20) - -/***MC Refresh Cycle Time Register***/ -#define AMAZON_SDRAM_MC_TREFRESH ((volatile u32*)(AMAZON_SDRAM+ 0x0190)) -#define AMAZON_SDRAM_MC_TREFRESH_TREF(value) (((( 1 << 13) - 1) & (value)) << 0) -#define AMAZON_SDRAM_MC_TREFRESH_Res(value) (((( 1 << 19) - 1) & (value)) << 13) - -/***********************************************************************/ -/* Module : GPTU register address and bits */ -/***********************************************************************/ - -#define AMAZON_GPTU (KSEG1+0x10100A00) -/***********************************************************************/ - - -/***GPT Clock Control Register***/ -#define AMAZON_GPTU_CLC ((volatile u32*)(AMAZON_GPTU+ 0x0000)) -#define AMAZON_GPTU_CLC_RMC(value) (((( 1 << 8) - 1) & (value)) << 8) -#define AMAZON_GPTU_CLC_DISS (1 << 1) -#define AMAZON_GPTU_CLC_DISR (1 << 0) - -/***GPT Timer 3 Control Register***/ -#define AMAZON_GPTU_T3CON ((volatile u32*)(AMAZON_GPTU+ 0x0014)) -#define AMAZON_GPTU_T3CON_T3RDIR (1 << 15) -#define AMAZON_GPTU_T3CON_T3CHDIR (1 << 14) -#define AMAZON_GPTU_T3CON_T3EDGE (1 << 13) -#define AMAZON_GPTU_T3CON_BPS1(value) (((( 1 << 2) - 1) & (value)) << 11) -#define AMAZON_GPTU_T3CON_T3OTL (1 << 10) -#define AMAZON_GPTU_T3CON_T3UD (1 << 7) -#define AMAZON_GPTU_T3CON_T3R (1 << 6) -#define AMAZON_GPTU_T3CON_T3M(value) (((( 1 << 3) - 1) & (value)) << 3) -#define AMAZON_GPTU_T3CON_T3I(value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Write Hardware Modified Timer 3 Control Register -If set and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define AMAZON_GPTU_WHBT3CON ((volatile u32*)(AMAZON_GPTU+ 0x004C)) -#define AMAZON_GPTU_WHBT3CON_SETT3CHDIR (1 << 15) -#define AMAZON_GPTU_WHBT3CON_CLRT3CHDIR (1 << 14) -#define AMAZON_GPTU_WHBT3CON_SETT3EDGE (1 << 13) -#define AMAZON_GPTU_WHBT3CON_CLRT3EDGE (1 << 12) -#define AMAZON_GPTU_WHBT3CON_SETT3OTL (1 << 11) -#define AMAZON_GPTU_WHBT3CON_CLRT3OTL (1 << 10) - -/***GPT Timer 2 Control Register***/ -#define AMAZON_GPTU_T2CON ((volatile u32*)(AMAZON_GPTU+ 0x0010)) -#define AMAZON_GPTU_T2CON_TxRDIR (1 << 15) -#define AMAZON_GPTU_T2CON_TxCHDIR (1 << 14) -#define AMAZON_GPTU_T2CON_TxEDGE (1 << 13) -#define AMAZON_GPTU_T2CON_TxIRDIS (1 << 12) -#define AMAZON_GPTU_T2CON_TxRC (1 << 9) -#define AMAZON_GPTU_T2CON_TxUD (1 << 7) -#define AMAZON_GPTU_T2CON_TxR (1 << 6) -#define AMAZON_GPTU_T2CON_TxM(value) (((( 1 << 3) - 1) & (value)) << 3) -#define AMAZON_GPTU_T2CON_TxI(value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Timer 4 Control Register***/ -#define AMAZON_GPTU_T4CON ((volatile u32*)(AMAZON_GPTU+ 0x0018)) -#define AMAZON_GPTU_T4CON_TxRDIR (1 << 15) -#define AMAZON_GPTU_T4CON_TxCHDIR (1 << 14) -#define AMAZON_GPTU_T4CON_TxEDGE (1 << 13) -#define AMAZON_GPTU_T4CON_TxIRDIS (1 << 12) -#define AMAZON_GPTU_T4CON_TxRC (1 << 9) -#define AMAZON_GPTU_T4CON_TxUD (1 << 7) -#define AMAZON_GPTU_T4CON_TxR (1 << 6) -#define AMAZON_GPTU_T4CON_TxM(value) (((( 1 << 3) - 1) & (value)) << 3) -#define AMAZON_GPTU_T4CON_TxI(value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Write HW Modified Timer 2 Control Register If set - and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define AMAZON_GPTU_WHBT2CON ((volatile u32*)(AMAZON_GPTU+ 0x0048)) -#define AMAZON_GPTU_WHBT2CON_SETTxCHDIR (1 << 15) -#define AMAZON_GPTU_WHBT2CON_CLRTxCHDIR (1 << 14) -#define AMAZON_GPTU_WHBT2CON_SETTxEDGE (1 << 13) -#define AMAZON_GPTU_WHBT2CON_CLRTxEDGE (1 << 12) - -/***GPT Write HW Modified Timer 4 Control Register If set - and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define AMAZON_GPTU_WHBT4CON ((volatile u32*)(AMAZON_GPTU+ 0x0050)) -#define AMAZON_GPTU_WHBT4CON_SETTxCHDIR (1 << 15) -#define AMAZON_GPTU_WHBT4CON_CLRTxCHDIR (1 << 14) -#define AMAZON_GPTU_WHBT4CON_SETTxEDGE (1 << 13) -#define AMAZON_GPTU_WHBT4CON_CLRTxEDGE (1 << 12) - -/***GPT Capture Reload Register***/ -#define AMAZON_GPTU_CAPREL ((volatile u32*)(AMAZON_GPTU+ 0x0030)) -#define AMAZON_GPTU_CAPREL_CAPREL(value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 2 Register***/ -#define AMAZON_GPTU_T2 ((volatile u32*)(AMAZON_GPTU+ 0x0034)) -#define AMAZON_GPTU_T2_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 3 Register***/ -#define AMAZON_GPTU_T3 ((volatile u32*)(AMAZON_GPTU+ 0x0038)) -#define AMAZON_GPTU_T3_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 4 Register***/ -#define AMAZON_GPTU_T4 ((volatile u32*)(AMAZON_GPTU+ 0x003C)) -#define AMAZON_GPTU_T4_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 5 Register***/ -#define AMAZON_GPTU_T5 ((volatile u32*)(AMAZON_GPTU+ 0x0040)) -#define AMAZON_GPTU_T5_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 6 Register***/ -#define AMAZON_GPTU_T6 ((volatile u32*)(AMAZON_GPTU+ 0x0044)) -#define AMAZON_GPTU_T6_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 6 Control Register***/ -#define AMAZON_GPTU_T6CON ((volatile u32*)(AMAZON_GPTU+ 0x0020)) -#define AMAZON_GPTU_T6CON_T6SR (1 << 15) -#define AMAZON_GPTU_T6CON_T6CLR (1 << 14) -#define AMAZON_GPTU_T6CON_BPS2(value) (((( 1 << 2) - 1) & (value)) << 11) -#define AMAZON_GPTU_T6CON_T6OTL (1 << 10) -#define AMAZON_GPTU_T6CON_T6UD (1 << 7) -#define AMAZON_GPTU_T6CON_T6R (1 << 6) -#define AMAZON_GPTU_T6CON_T6M(value) (((( 1 << 3) - 1) & (value)) << 3) -#define AMAZON_GPTU_T6CON_T6I(value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Write HW Modified Timer 6 Control Register If set - and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define AMAZON_GPTU_WHBT6CON ((volatile u32*)(AMAZON_GPTU+ 0x0054)) -#define AMAZON_GPTU_WHBT6CON_SETT6OTL (1 << 11) -#define AMAZON_GPTU_WHBT6CON_CLRT6OTL (1 << 10) - -/***GPT Timer 5 Control Register***/ -#define AMAZON_GPTU_T5CON ((volatile u32*)(AMAZON_GPTU+ 0x001C)) -#define AMAZON_GPTU_T5CON_T5SC (1 << 15) -#define AMAZON_GPTU_T5CON_T5CLR (1 << 14) -#define AMAZON_GPTU_T5CON_CI(value) (((( 1 << 2) - 1) & (value)) << 12) -#define AMAZON_GPTU_T5CON_T5CC (1 << 11) -#define AMAZON_GPTU_T5CON_CT3 (1 << 10) -#define AMAZON_GPTU_T5CON_T5RC (1 << 9) -#define AMAZON_GPTU_T5CON_T5UDE (1 << 8) -#define AMAZON_GPTU_T5CON_T5UD (1 << 7) -#define AMAZON_GPTU_T5CON_T5R (1 << 6) -#define AMAZON_GPTU_T5CON_T5M(value) (((( 1 << 3) - 1) & (value)) << 3) -#define AMAZON_GPTU_T5CON_T5I(value) (((( 1 << 3) - 1) & (value)) << 0) - - -/***********************************************************************/ -/* Module : ASC register address and bits */ -/***********************************************************************/ - -#define AMAZON_ASC (KSEG1+0x10100400) -/***********************************************************************/ - - -/***ASC Port Input Select Register***/ -#define AMAZON_ASC_PISEL (AMAZON_ASC+ 0x0004) -#define AMAZON_ASC_PISEL_RIS (1 << 0) - -/***ASC Control Register***/ -#define AMAZON_ASC_CON (AMAZON_ASC+ 0x0010) -#define AMAZON_ASC_CON_R (1 << 15) -#define AMAZON_ASC_CON_LB (1 << 14) -#define AMAZON_ASC_CON_BRS (1 << 13) -#define AMAZON_ASC_CON_ODD (1 << 12) -#define AMAZON_ASC_CON_FDE (1 << 11) -#define AMAZON_ASC_CON_OE (1 << 10) -#define AMAZON_ASC_CON_FE (1 << 9) -#define AMAZON_ASC_CON_PE (1 << 8) -#define AMAZON_ASC_CON_OEN (1 << 7) -#define AMAZON_ASC_CON_FEN (1 << 6) -#define AMAZON_ASC_CON_PENRXDI (1 << 5) -#define AMAZON_ASC_CON_REN (1 << 4) -#define AMAZON_ASC_CON_STP (1 << 3) -#define AMAZON_ASC_CON_M(value) (((( 1 << 3) - 1) & (value)) << 0) - -/***ASC Write Hardware Modified Control Register***/ -#define AMAZON_ASC_WHBCON (AMAZON_ASC+ 0x0050) -#define AMAZON_ASC_WHBCON_SETOE (1 << 13) -#define AMAZON_ASC_WHBCON_SETFE (1 << 12) -#define AMAZON_ASC_WHBCON_SETPE (1 << 11) -#define AMAZON_ASC_WHBCON_CLROE (1 << 10) -#define AMAZON_ASC_WHBCON_CLRFE (1 << 9) -#define AMAZON_ASC_WHBCON_CLRPE (1 << 8) -#define AMAZON_ASC_WHBCON_SETREN (1 << 5) -#define AMAZON_ASC_WHBCON_CLRREN (1 << 4) - -/***ASC Baudrate Timer/Reload Register***/ -#define AMAZON_ASC_BTR (AMAZON_ASC+ 0x0014) -#define AMAZON_ASC_BTR_BR_VALUE(value) (((( 1 << 13) - 1) & (value)) << 0) - -/***ASC Fractional Divider Register***/ -#define AMAZON_ASC_FDV (AMAZON_ASC+ 0x0018) -#define AMAZON_ASC_FDV_FD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0) - -/***ASC IrDA Pulse Mode/Width Register***/ -#define AMAZON_ASC_PMW (AMAZON_ASC+ 0x001C) -#define AMAZON_ASC_PMW_IRPW (1 << 8) -#define AMAZON_ASC_PMW_PW_VALUE(value) (((( 1 << 8) - 1) & (value)) << 0) - -/***ASC Transmit Buffer Register***/ -#define AMAZON_ASC_TBUF (AMAZON_ASC+ 0x0020) -#define AMAZON_ASC_TBUF_TD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0) - -/***ASC Receive Buffer Register***/ -#define AMAZON_ASC_RBUF (AMAZON_ASC+ 0x0024) -#define AMAZON_ASC_RBUF_RD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0) - -/***ASC Autobaud Control Register***/ -#define AMAZON_ASC_ABCON (AMAZON_ASC+ 0x0030) -#define AMAZON_ASC_ABCON_RXINV (1 << 11) -#define AMAZON_ASC_ABCON_TXINV (1 << 10) -#define AMAZON_ASC_ABCON_ABEM(value) (((( 1 << 2) - 1) & (value)) << 8) -#define AMAZON_ASC_ABCON_FCDETEN (1 << 4) -#define AMAZON_ASC_ABCON_ABDETEN (1 << 3) -#define AMAZON_ASC_ABCON_ABSTEN (1 << 2) -#define AMAZON_ASC_ABCON_AUREN (1 << 1) -#define AMAZON_ASC_ABCON_ABEN (1 << 0) - -/***Receive FIFO Control Register***/ -#define AMAZON_ASC_RXFCON (AMAZON_ASC+ 0x0040) -#define AMAZON_ASC_RXFCON_RXFITL(value) (((( 1 << 6) - 1) & (value)) << 8) -#define AMAZON_ASC_RXFCON_RXTMEN (1 << 2) -#define AMAZON_ASC_RXFCON_RXFFLU (1 << 1) -#define AMAZON_ASC_RXFCON_RXFEN (1 << 0) - -/***Transmit FIFO Control Register***/ -#define AMAZON_ASC_TXFCON (AMAZON_ASC+ 0x0044) -#define AMAZON_ASC_TXFCON_TXFITL(value) (((( 1 << 6) - 1) & (value)) << 8) -#define AMAZON_ASC_TXFCON_TXTMEN (1 << 2) -#define AMAZON_ASC_TXFCON_TXFFLU (1 << 1) -#define AMAZON_ASC_TXFCON_TXFEN (1 << 0) - -/***FIFO Status Register***/ -#define AMAZON_ASC_FSTAT (AMAZON_ASC+ 0x0048) -#define AMAZON_ASC_FSTAT_TXFFL(value) (((( 1 << 6) - 1) & (value)) << 8) -#define AMAZON_ASC_FSTAT_RXFFL(value) (((( 1 << 6) - 1) & (value)) << 0) - -/***ASC Write HW Modified Autobaud Control Register***/ -#define AMAZON_ASC_WHBABCON (AMAZON_ASC+ 0x0054) -#define AMAZON_ASC_WHBABCON_SETABEN (1 << 1) -#define AMAZON_ASC_WHBABCON_CLRABEN (1 << 0) - -/***ASC Autobaud Status Register***/ -#define AMAZON_ASC_ABSTAT (AMAZON_ASC+ 0x0034) -#define AMAZON_ASC_ABSTAT_DETWAIT (1 << 4) -#define AMAZON_ASC_ABSTAT_SCCDET (1 << 3) -#define AMAZON_ASC_ABSTAT_SCSDET (1 << 2) -#define AMAZON_ASC_ABSTAT_FCCDET (1 << 1) -#define AMAZON_ASC_ABSTAT_FCSDET (1 << 0) - -/***ASC Write HW Modified Autobaud Status Register***/ -#define AMAZON_ASC_WHBABSTAT (AMAZON_ASC+ 0x0058) -#define AMAZON_ASC_WHBABSTAT_SETDETWAIT (1 << 9) -#define AMAZON_ASC_WHBABSTAT_CLRDETWAIT (1 << 8) -#define AMAZON_ASC_WHBABSTAT_SETSCCDET (1 << 7) -#define AMAZON_ASC_WHBABSTAT_CLRSCCDET (1 << 6) -#define AMAZON_ASC_WHBABSTAT_SETSCSDET (1 << 5) -#define AMAZON_ASC_WHBABSTAT_CLRSCSDET (1 << 4) -#define AMAZON_ASC_WHBABSTAT_SETFCCDET (1 << 3) -#define AMAZON_ASC_WHBABSTAT_CLRFCCDET (1 << 2) -#define AMAZON_ASC_WHBABSTAT_SETFCSDET (1 << 1) -#define AMAZON_ASC_WHBABSTAT_CLRFCSDET (1 << 0) - -/***ASC Clock Control Register***/ -#define AMAZON_ASC_CLC (AMAZON_ASC+ 0x0000) -#define AMAZON_ASC_CLC_RMC(value) (((( 1 << 8) - 1) & (value)) << 8) -#define AMAZON_ASC_CLC_DISS (1 << 1) -#define AMAZON_ASC_CLC_DISR (1 << 0) - -/***ASC IRNCR0 **/ -#define AMAZON_ASC_IRNCR0 (AMAZON_ASC+ 0x00FC) -/***ASC IRNCR1 **/ -#define AMAZON_ASC_IRNCR1 (AMAZON_ASC+ 0x00F8) -#define ASC_IRNCR_TIR 0x1 -#define ASC_IRNCR_RIR 0x2 -#define ASC_IRNCR_EIR 0x4 -/***********************************************************************/ -/* Module : DMA register address and bits */ -/***********************************************************************/ - -#define AMAZON_DMA (KSEG1+0x10103000) -/***********************************************************************/ -#define AMAZON_DMA_CH_ON AMAZON_DMA+0x28 -#define AMAZON_DMA_CH_RST AMAZON_DMA+0x2c -#define AMAZON_DMA_CH0_ISR AMAZON_DMA+0x30 -#define AMAZON_DMA_CH1_ISR AMAZON_DMA+0x34 -#define AMAZON_DMA_CH2_ISR AMAZON_DMA+0x38 -#define AMAZON_DMA_CH3_ISR AMAZON_DMA+0x3c -#define AMAZON_DMA_CH4_ISR AMAZON_DMA+0x40 -#define AMAZON_DMA_CH5_ISR AMAZON_DMA+0x44 -#define AMAZON_DMA_CH6_ISR AMAZON_DMA+0x48 -#define AMAZON_DMA_CH7_ISR AMAZON_DMA+0x4c -#define AMAZON_DMA_CH8_ISR AMAZON_DMA+0x50 -#define AMAZON_DMA_CH9_ISR AMAZON_DMA+0x54 -#define AMAZON_DMA_CH10_ISR AMAZON_DMA+0x58 -#define AMAZON_DMA_CH11_ISR AMAZON_DMA+0x5c -#define AMAZON_DMA_CH0_MSK AMAZON_DMA+0x60 -#define AMAZON_DMA_CH1_MSK AMAZON_DMA+0x64 -#define AMAZON_DMA_CH2_MSK AMAZON_DMA+0x68 -#define AMAZON_DMA_CH3_MSK AMAZON_DMA+0x6c -#define AMAZON_DMA_CH4_MSK AMAZON_DMA+0x70 -#define AMAZON_DMA_CH5_MSK AMAZON_DMA+0x74 -#define AMAZON_DMA_CH6_MSK AMAZON_DMA+0x78 -#define AMAZON_DMA_CH7_MSK AMAZON_DMA+0x7c -#define AMAZON_DMA_CH8_MSK AMAZON_DMA+0x80 -#define AMAZON_DMA_CH9_MSK AMAZON_DMA+0x84 -#define AMAZON_DMA_CH10_MSK AMAZON_DMA+0x88 -#define AMAZON_DMA_CH11_MSK AMAZON_DMA+0x8c -#define AMAZON_DMA_Desc_BA AMAZON_DMA+0x90 -#define AMAZON_DMA_CH0_DES_LEN AMAZON_DMA+0x94 -#define AMAZON_DMA_CH1_DES_LEN AMAZON_DMA+0x98 -#define AMAZON_DMA_CH2_DES_LEN AMAZON_DMA+0x9c -#define AMAZON_DMA_CH3_DES_LEN AMAZON_DMA+0xa0 -#define AMAZON_DMA_CH4_DES_LEN AMAZON_DMA+0xa4 -#define AMAZON_DMA_CH5_DES_LEN AMAZON_DMA+0xa8 -#define AMAZON_DMA_CH6_DES_LEN AMAZON_DMA+0xac -#define AMAZON_DMA_CH7_DES_LEN AMAZON_DMA+0xb0 -#define AMAZON_DMA_CH8_DES_LEN AMAZON_DMA+0xb4 -#define AMAZON_DMA_CH9_DES_LEN AMAZON_DMA+0xb8 -#define AMAZON_DMA_CH10_DES_LEN AMAZON_DMA+0xbc -#define AMAZON_DMA_CH11_DES_LEN AMAZON_DMA+0xc0 -#define AMAZON_DMA_CH1_DES_OFST AMAZON_DMA+0xc4 -#define AMAZON_DMA_CH2_DES_OFST AMAZON_DMA+0xc8 -#define AMAZON_DMA_CH3_DES_OFST AMAZON_DMA+0xcc -#define AMAZON_DMA_CH4_DES_OFST AMAZON_DMA+0xd0 -#define AMAZON_DMA_CH5_DES_OFST AMAZON_DMA+0xd4 -#define AMAZON_DMA_CH6_DES_OFST AMAZON_DMA+0xd8 -#define AMAZON_DMA_CH7_DES_OFST AMAZON_DMA+0xdc -#define AMAZON_DMA_CH8_DES_OFST AMAZON_DMA+0xe0 -#define AMAZON_DMA_CH9_DES_OFST AMAZON_DMA+0xe4 -#define AMAZON_DMA_CH10_DES_OFST AMAZON_DMA+0xe8 -#define AMAZON_DMA_CH11_DES_OFST AMAZON_DMA+0xec -#define AMAZON_DMA_SW_BL AMAZON_DMA+0xf0 -#define AMAZON_DMA_TPE_BL AMAZON_DMA+0xf4 -#define AMAZON_DMA_DPlus2FPI_BL AMAZON_DMA+0xf8 -#define AMAZON_DMA_GRX_BUF_LEN AMAZON_DMA+0xfc -#define AMAZON_DMA_DMA_ECON_REG AMAZON_DMA+0x100 -#define AMAZON_DMA_POLLING_REG AMAZON_DMA+0x104 -#define AMAZON_DMA_CH_WGT AMAZON_DMA+0x108 -#define AMAZON_DMA_TX_WGT AMAZON_DMA+0x10c -#define AMAZON_DMA_DPLus2FPI_CLASS AMAZON_DMA+0x110 -#define AMAZON_DMA_COMB_ISR AMAZON_DMA+0x114 - -//channel reset -#define SWITCH1_RST_MASK 0x83 /* Switch1 channel mask */ -#define SWITCH2_RST_MASK 0x10C /* Switch1 channel mask */ -#define TPE_RST_MASK 0x630 /* TPE channel mask */ -#define DPlus2FPI_RST_MASK 0x840 /* DPlusFPI channel mask */ - -//ISR -#define DMA_ISR_RDERR 0x20 -#define DMA_ISR_CMDCPT 0x10 -#define DMA_ISR_CPT 0x8 -#define DMA_ISR_DURR 0x4 -#define DMA_ISR_EOP 0x2 -#define DMA_DESC_BYTEOFF_SHIFT 23 - -#define DMA_POLLING_ENABLE 0x80000000 -#define DMA_POLLING_CNT 0x50 /*minimum 0x10, max 0xfff0*/ - -/***********************************************************************/ -/* Module : Debug register address and bits */ -/***********************************************************************/ - -#define AMAZON_DEBUG (KSEG1+0x1F106000) -/***********************************************************************/ - - -/***MCD Break System Control Register***/ -#define AMAZON_DEBUG_MCD_BSCR ((volatile u32*)(AMAZON_DEBUG+ 0x0000)) - -/***PMC Performance Counter Control Register0***/ -#define AMAZON_DEBUG_PMC_PCCR0 ((volatile u32*)(AMAZON_DEBUG+ 0x0010)) - -/***PMC Performance Counter Control Register1***/ -#define AMAZON_DEBUG_PMC_PCCR1 ((volatile u32*)(AMAZON_DEBUG+ 0x0014)) - -/***PMC Performance Counter Register0***/ -#define AMAZON_DEBUG_PMC_PCR0 ((volatile u32*)(AMAZON_DEBUG+ 0x0018)) - -/*165001:henryhsu:20050603:Source modified by Bing Tao*/ - -/***PMC Performance Counter Register1***/ -//#define AMAZON_DEBUG_PMC_PCR1 ((volatile u32*)(AMAZON_DEBUG+ 0x0020)) -#define AMAZON_DEBUG_PMC_PCR1 ((volatile u32*)(AMAZON_DEBUG+ 0x001c)) - -/*165001*/ - - - -/***MCD Suspend Mode Control Register***/ -#define AMAZON_DEBUG_MCD_SMCR ((volatile u32*)(AMAZON_DEBUG+ 0x0024)) - -/***********************************************************************/ -/* Module : GPIO register address and bits */ -/***********************************************************************/ - -#define AMAZON_GPIO (KSEG1+0x10100B00) -/***********************************************************************/ - - -/***Port 0 Data Output Register (0010H)***/ -#define AMAZON_GPIO_P0_OUT ((volatile u32*)(AMAZON_GPIO+ 0x0010)) - -/***Port 1 Data Output Register (0040H)***/ -#define AMAZON_GPIO_P1_OUT ((volatile u32*)(AMAZON_GPIO+ 0x0040)) - -/***Port 0 Data Input Register (0014H)***/ -#define AMAZON_GPIO_P0_IN ((volatile u32*)(AMAZON_GPIO+ 0x0014)) - -/***Port 1 Data Input Register (0044H)***/ -#define AMAZON_GPIO_P1_IN ((volatile u32*)(AMAZON_GPIO+ 0x0044)) - -/***Port 0 Direction Register (0018H)***/ -#define AMAZON_GPIO_P0_DIR ((volatile u32*)(AMAZON_GPIO+ 0x0018)) - -/***Port 1 Direction Register (0048H)***/ -#define AMAZON_GPIO_P1_DIR ((volatile u32*)(AMAZON_GPIO+ 0x0048)) - -/***Port 0 Alternate Function Select Register 0 (001C H) ***/ -#define AMAZON_GPIO_P0_ALTSEL0 ((volatile u32*)(AMAZON_GPIO+ 0x001C)) - -/***Port 1 Alternate Function Select Register 0 (004C H) ***/ -#define AMAZON_GPIO_P1_ALTSEL0 ((volatile u32*)(AMAZON_GPIO+ 0x004C)) - -/***Port 0 Alternate Function Select Register 1 (0020 H) ***/ -#define AMAZON_GPIO_P0_ALTSEL1 ((volatile u32*)(AMAZON_GPIO+ 0x0020)) - -/***Port 1 Alternate Function Select Register 0 (0050 H) ***/ -#define AMAZON_GPIO_P1_ALTSEL1 ((volatile u32*)(AMAZON_GPIO+ 0x0050)) - -/***Port 0 Open Drain Control Register (0024H)***/ -#define AMAZON_GPIO_P0_OD ((volatile u32*)(AMAZON_GPIO+ 0x0024)) - -/***Port 1 Open Drain Control Register (0054H)***/ -#define AMAZON_GPIO_P1_OD ((volatile u32*)(AMAZON_GPIO+ 0x0054)) - -/***Port 0 Input Schmitt-Trigger Off Register (0028 H) ***/ -#define AMAZON_GPIO_P0_STOFF ((volatile u32*)(AMAZON_GPIO+ 0x0028)) - -/***Port 1 Input Schmitt-Trigger Off Register (0058 H) ***/ -#define AMAZON_GPIO_P1_STOFF ((volatile u32*)(AMAZON_GPIO+ 0x0058)) - -/***Port 0 Pull Up/Pull Down Select Register (002C H)***/ -#define AMAZON_GPIO_P0_PUDSEL ((volatile u32*)(AMAZON_GPIO+ 0x002C)) - -/***Port 1 Pull Up/Pull Down Select Register (005C H)***/ -#define AMAZON_GPIO_P1_PUDSEL ((volatile u32*)(AMAZON_GPIO+ 0x005C)) - -/***Port 0 Pull Up Device Enable Register (0030 H)***/ -#define AMAZON_GPIO_P0_PUDEN ((volatile u32*)(AMAZON_GPIO+ 0x0030)) - -/***Port 1 Pull Up Device Enable Register (0060 H)***/ -#define AMAZON_GPIO_P1_PUDEN ((volatile u32*)(AMAZON_GPIO+ 0x0060)) - -/***********************************************************************/ -/* Module : BIU register address and bits */ -/***********************************************************************/ - -#define AMAZON_BIU (KSEG1+0x1FA80000) -/***********************************************************************/ - - -/***BIU Identification Register***/ -#define AMAZON_BIU_ID ((volatile u32*)(AMAZON_BIU+ 0x0000)) -#define AMAZON_BIU_ID_ARCH (1 << 16) -#define AMAZON_BIU_ID_ID(value) (((( 1 << 8) - 1) & (value)) << 8) -#define AMAZON_BIU_ID_REV(value) (((( 1 << 8) - 1) & (value)) << 0) - -/***BIU Access Error Cause Register***/ -#define AMAZON_BIU_ERRCAUSE ((volatile u32*)(AMAZON_BIU+ 0x0100)) -#define AMAZON_BIU_ERRCAUSE_ERR (1 << 31) -#define AMAZON_BIU_ERRCAUSE_PORT(value) (((( 1 << 4) - 1) & (value)) << 16) -#define AMAZON_BIU_ERRCAUSE_CAUSE(value) (((( 1 << 2) - 1) & (value)) << 0) - -/***BIU Access Error Address Register***/ -#define AMAZON_BIU_ERRADDR ((volatile u32*)(AMAZON_BIU+ 0x0108)) -#define AMAZON_BIU_ERRADDR_ADDR - -/***********************************************************************/ -/* Module : ICU register address and bits */ -/***********************************************************************/ - -#define AMAZON_ICU (KSEG1+0x1F101000) -/***********************************************************************/ - -/***IM0 Interrupt Status Register***/ -#define AMAZON_ICU_IM0_ISR (AMAZON_ICU + 0x0010) -#define AMAZON_ICU_IM1_ISR (AMAZON_ICU + 0x0020) -#define AMAZON_ICU_IM2_ISR (AMAZON_ICU + 0x0030) -#define AMAZON_ICU_IM3_ISR (AMAZON_ICU + 0x0040) -#define AMAZON_ICU_IM4_ISR (AMAZON_ICU + 0x0050) - -/***IM0 Interrupt Enable Register***/ -#define AMAZON_ICU_IM0_IER (AMAZON_ICU + 0x0014) -#define AMAZON_ICU_IM1_IER (AMAZON_ICU + 0x0024) -#define AMAZON_ICU_IM2_IER (AMAZON_ICU + 0x0034) -#define AMAZON_ICU_IM3_IER (AMAZON_ICU + 0x0044) -#define AMAZON_ICU_IM4_IER (AMAZON_ICU + 0x0054) - -/***IM0 Interrupt Output Status Register***/ -#define AMAZON_ICU_IM0_IOSR (AMAZON_ICU + 0x0018) -#define AMAZON_ICU_IM1_IOSR (AMAZON_ICU + 0x0028) -#define AMAZON_ICU_IM2_IOSR (AMAZON_ICU + 0x0038) -#define AMAZON_ICU_IM3_IOSR (AMAZON_ICU + 0x0048) -#define AMAZON_ICU_IM4_IOSR (AMAZON_ICU + 0x0058) - -/***IM0 Interrupt Request Set Register***/ -#define AMAZON_ICU_IM0_IRSR (AMAZON_ICU + 0x001c) -#define AMAZON_ICU_IM1_IRSR (AMAZON_ICU + 0x002c) -#define AMAZON_ICU_IM2_IRSR (AMAZON_ICU + 0x003c) -#define AMAZON_ICU_IM3_IRSR (AMAZON_ICU + 0x004c) -#define AMAZON_ICU_IM4_IRSR (AMAZON_ICU + 0x005c) - -/***Interrupt Vector Value Register***/ -#define AMAZON_ICU_IM_VEC (AMAZON_ICU + 0x0060) - -/***Interrupt Vector Value Mask***/ -#define AMAZON_ICU_IM0_VEC_MASK 0x0000001f -#define AMAZON_ICU_IM1_VEC_MASK 0x000003e0 -#define AMAZON_ICU_IM2_VEC_MASK 0x00007c00 -#define AMAZON_ICU_IM3_VEC_MASK 0x000f8000 -#define AMAZON_ICU_IM4_VEC_MASK 0x01f00000 - -/***DMA Interrupt Mask Value***/ -#define AMAZON_DMA_H_MASK 0x00000fff - -/***External Interrupt Control Register***/ -#define AMAZON_ICU_EXTINTCR ((volatile u32*)(AMAZON_ICU + 0x0000)) -#define AMAZON_ICU_IRNICR ((volatile u32*)(AMAZON_ICU + 0x0004)) -#define AMAZON_ICU_IRNCR ((volatile u32*)(AMAZON_ICU + 0x0008)) -#define AMAZON_ICU_IRNEN ((volatile u32*)(AMAZON_ICU + 0x000c)) - -/***********************************************************************/ -/* Module : PCI/Card-BUS/PC-Card register address and bits */ -/***********************************************************************/ - -#define AMAZON_PCI (KSEG1+0x10105400) -#define AMAZON_PCI_CFG_BASE (KSEG1+0x11000000) -#define AMAZON_PCI_MEM_BASE (KSEG1+0x12000000) - -#define CLOCK_CONTROL AMAZON_PCI + 0x00000000 -#define ARB_CTRL_bit 1 -#define IDENTIFICATION AMAZON_PCI + 0x00000004 -#define SOFTRESET AMAZON_PCI + 0x00000010 -#define PCI_FPI_ERROR_ADDRESS AMAZON_PCI + 0x00000014 -#define FPI_PCI_ERROR_ADDRESS AMAZON_PCI + 0x00000018 -#define FPI_ERROR_TAG AMAZON_PCI + 0x0000001c -#define IRR AMAZON_PCI + 0x00000020 -#define IRA_IR AMAZON_PCI + 0x00000024 -#define IRM AMAZON_PCI + 0x00000028 -#define DMA_COMPLETE_BIT 0 -#define PCI_POWER_CHANGE_BIT 16 -#define PCI_MASTER0_BROKEN_INT_BIT 24 -#define PCI_MASTER1_BROKEN_INT_BIT 25 -#define PCI_MASTER2_BROKEN_INT_BIT 26 -#define EOI AMAZON_PCI + 0x0000002c -#define PCI_MODE AMAZON_PCI + 0x00000030 -#define PCI_MODE_cfgok_bit 24 -#define DEVICE_VENDOR_ID AMAZON_PCI + 0x00000034 -#define SUBSYSTEM_VENDOR_ID AMAZON_PCI + 0x00000038 -#define POWER_MANAGEMENT AMAZON_PCI + 0x0000003c -#define CLASS_CODE1 AMAZON_PCI + 0x00000040 -#define BAR11_MASK AMAZON_PCI + 0x00000044 -#define BAR12_MASK AMAZON_PCI + 0x00000048 -#define BAR13_MASK AMAZON_PCI + 0x0000004c -#define BAR14_MASK AMAZON_PCI + 0x00000050 -#define BAR15_MASK AMAZON_PCI + 0x00000054 -#define BAR16_MASK AMAZON_PCI + 0x00000058 -#define CARDBUS_CIS_POINTER1 AMAZON_PCI + 0x0000005c -#define SUBSYSTEM_ID1 AMAZON_PCI + 0x00000060 -#define PCI_ADDRESS_MAP_11 AMAZON_PCI + 0x00000064 -#define PCI_ADDRESS_MAP_12 AMAZON_PCI + 0x00000068 -#define PCI_ADDRESS_MAP_13 AMAZON_PCI + 0x0000006c -#define PCI_ADDRESS_MAP_14 AMAZON_PCI + 0x00000070 -#define PCI_ADDRESS_MAP_15 AMAZON_PCI + 0x00000074 -#define PCI_ADDRESS_MAP_16 AMAZON_PCI + 0x00000078 -#define FPI_SEGMENT_ENABLE AMAZON_PCI + 0x0000007c -#define CLASS_CODE2 AMAZON_PCI + 0x00000080 -#define BAR21_MASK AMAZON_PCI + 0x00000084 -#define BAR22_MASK AMAZON_PCI + 0x00000088 -#define BAR23_MASK AMAZON_PCI + 0x0000008c -#define BAR24_MASK AMAZON_PCI + 0x00000090 -#define BAR25_MASK AMAZON_PCI + 0x00000094 -#define BAR26_MASK AMAZON_PCI + 0x00000098 -#define CARDBUS_CIS_POINTER2 AMAZON_PCI + 0x0000009c -#define SUBSYSTEM_ID2 AMAZON_PCI + 0x000000a0 -#define PCI_ADDRESS_MAP_21 AMAZON_PCI + 0x000000a4 -#define PCI_ADDRESS_MAP_22 AMAZON_PCI + 0x000000a8 -#define PCI_ADDRESS_MAP_23 AMAZON_PCI + 0x000000ac -#define PCI_ADDRESS_MAP_24 AMAZON_PCI + 0x000000b0 -#define PCI_ADDRESS_MAP_25 AMAZON_PCI + 0x000000b4 -#define PCI_ADDRESS_MAP_26 AMAZON_PCI + 0x000000b8 -#define FPI_ADDRESS_MASK11LOW AMAZON_PCI + 0x000000bc -#define FPI_ADDRESS_MAP_0 AMAZON_PCI + 0x000000c0 -#define FPI_ADDRESS_MAP_1 AMAZON_PCI + 0x000000c4 -#define FPI_ADDRESS_MAP_2 AMAZON_PCI + 0x000000c8 -#define FPI_ADDRESS_MAP_3 AMAZON_PCI + 0x000000cc -#define FPI_ADDRESS_MAP_4 AMAZON_PCI + 0x000000d0 -#define FPI_ADDRESS_MAP_5 AMAZON_PCI + 0x000000d4 -#define FPI_ADDRESS_MAP_6 AMAZON_PCI + 0x000000d8 -#define FPI_ADDRESS_MAP_7 AMAZON_PCI + 0x000000dc -#define FPI_ADDRESS_MAP_11LOW AMAZON_PCI + 0x000000e0 -#define FPI_ADDRESS_MAP_11HIGH AMAZON_PCI + 0x000000e4 -#define FPI_BURST_LENGTH AMAZON_PCI + 0x000000e8 -#define SET_PCI_SERR AMAZON_PCI + 0x000000ec -#define DMA_FPI_START_ADDR AMAZON_PCI + 0x000000f0 -#define DMA_PCI_START_ADDR AMAZON_PCI + 0x000000f4 -#define DMA_TRANSFER_COUNT AMAZON_PCI + 0x000000f8 -#define DMA_CONTROL_STATUS AMAZON_PCI + 0x000000fc - -#define EXT_PCI1_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x0800 -#define EXT_PCI2_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x1000 -#define EXT_PCI3_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x1800 -#define EXT_PCI4_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x2000 -#define EXT_PCI5_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x2800 -#define EXT_PCI6_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x3000 -#define EXT_PCI7_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x3800 -#define EXT_PCI8_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x4000 -#define EXT_PCI9_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x4800 -#define EXT_PCI10_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x5000 -#define EXT_PCI11_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x5800 -#define EXT_PCI12_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x6000 -#define EXT_PCI13_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x6800 -#define EXT_PCI14_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x7000 -#define EXT_PCI15_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x7800 -#define EXT_CARDBUS_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0XF000 -#define EXT_PCI_BAR1_ADDR 0x10 -#define EXT_PCI_BAR2_ADDR 0x14 -#define EXT_PCI_BAR3_ADDR 0x18 -#define EXT_PCI_BAR4_ADDR 0x1C -#define EXT_PCI_BAR5_ADDR 0x20 -#define EXT_PCI_BAR6_ADDR 0x24 - -#define DEVICE_ID_VECDOR_ID_ADDR AMAZON_PCI_CFG_BASE + 0x0 -#define STATUS_COMMAND_ADDR AMAZON_PCI_CFG_BASE + 0x4 -#define BUS_MASTER_ENABLE_BIT 2 -#define MEM_SPACE_ENABLE_BIT 1 -#define CLASS_CODE_REVISION_ADDR AMAZON_PCI_CFG_BASE + 0x8 -#define BIST_HEADER_TYPE_LATENCY_CAHCE_ADDR AMAZON_PCI_CFG_BASE + 0xC -#define BAR1_ADDR AMAZON_PCI_CFG_BASE + 0x10 -#define BAR2_ADDR AMAZON_PCI_CFG_BASE + 0x14 -#define BAR3_ADDR AMAZON_PCI_CFG_BASE + 0x18 -#define BAR4_ADDR AMAZON_PCI_CFG_BASE + 0x1C -#define BAR3_ADDR AMAZON_PCI_CFG_BASE + 0x18 -#define BAR4_ADDR AMAZON_PCI_CFG_BASE + 0x1C -#define BAR5_ADDR AMAZON_PCI_CFG_BASE + 0x20 -#define BAR6_ADDR AMAZON_PCI_CFG_BASE + 0x24 -#define CARDBUS_CIS_POINTER_ADDR AMAZON_PCI_CFG_BASE + 0x28 -#define SUBSYSTEM_ID_VENDOR_ID_ADDR AMAZON_PCI_CFG_BASE + 0x2C -#define EXPANSION_ROM_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x30 -#define CAPABILITIES_POINTER_ADDR AMAZON_PCI_CFG_BASE + 0x34 -#define RESERVED_0x38 AMAZON_PCI_CFG_BASE + 0x38 -#define MAX_LAT_MIN_GNT_INT_PIN_LINE_ADDR AMAZON_PCI_CFG_BASE + 0x3C -#define POWER_MNGT_NEXT_POINTER_CAP_ID_ADDR AMAZON_PCI_CFG_BASE + 0x40 -#define POWER_MANAGEMENT_CTRL_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x44 -#define RESERVED_0x48 AMAZON_PCI_CFG_BASE + 0x48 -#define RESERVED_0x4C AMAZON_PCI_CFG_BASE + 0x4C -#define ERROR_ADDR_PCI_FPI_ADDR AMAZON_PCI_CFG_BASE + 0x50 -#define ERROR_ADdR_FPI_PCI_ADDR AMAZON_PCI_CFG_BASE + 0x54 -#define ERROR_TAG_FPI_PCI_ADDR AMAZON_PCI_CFG_BASE + 0x58 -#define PCI_ARB_CTRL_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x5C -#define INTERNAL_ARB_ENABLE_BIT 0 -#define ARB_SCHEME_BIT 1 -#define PCI_MASTER0_PRIOR_2BITS 2 -#define PCI_MASTER1_PRIOR_2BITS 4 -#define PCI_MASTER2_PRIOR_2BITS 6 -#define PCI_MASTER0_REQ_MASK_2BITS 8 -#define PCI_MASTER1_REQ_MASK_2BITS 10 -#define PCI_MASTER2_REQ_MASK_2BITS 12 -#define PCI_MASTER0_GNT_MASK_2BITS 14 -#define PCI_MASTER1_GNT_MASK_2BITS 16 -#define PCI_MASTER2_GNT_MASK_2BITS 18 -#define FPI_PCI_INT_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x60 -#define FPI_PCI_INT_ACK_ADDR AMAZON_PCI_CFG_BASE + 0x64 -#define FPI_PCI_INT_MASK_ADDR AMAZON_PCI_CFG_BASE + 0x68 -#define CARDBUS_CTRL_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x6C -#define CARDBUS_CFRAME_ENABLE 0 - -#define CLOCK_CONTROL_default 0x00000000 -#define CLOCK_CONTROL_mask 0x00000003 - -#define IDENTIFICATION_default 0x0011C002 -#define IDENTIFICATION_mask 0x00000000 - -#define SOFTRESET_default 0x00000000 -// SOFTRESET bit 0 is writable but will be reset to 0 after software reset is over -#define SOFTRESET_mask 0x00000000 - -#define PCI_FPI_ERROR_ADDRESS_default 0xFFFFFFFF -#define PCI_FPI_ERROR_ADDRESS_mask 0x00000000 - -#define FPI_PCI_ERROR_ADDRESS_default 0xFFFFFFFF -#define FPI_PCI_ERROR_ADDRESS_mask 0x00000000 - -#define FPI_ERROR_TAG_default 0x0000000F -#define FPI_ERROR_TAG_mask 0x00000000 - -#define IRR_default 0x00000000 -#define IRR_mask 0x07013b2F - -#define IRA_IR_default 0x00000000 -#define IRA_IR_mask 0x07013b2F - -#define IRM_default 0x00000000 -#define IRM_mask 0xFFFFFFFF - -#define EOI_default 0x00000000 -#define EOI_mask 0x00000000 - -#define PCI_MODE_default 0x01000103 -#define PCI_MODE_mask 0x1107070F - -#define DEVICE_VENDOR_ID_default 0x000C15D1 -#define DEVICE_VENDOR_ID_mask 0xFFFFFFFF - -#define SUBSYSTEM_VENDOR_ID_default 0x000015D1 -#define SUBSYSTEM_VENDOR_ID_mask 0x0000FFFF - -#define POWER_MANAGEMENT_default 0x0000001B -#define POWER_MANAGEMENT_mask 0x0000001F - -#define CLASS_CODE1_default 0x00028000 -#define CLASS_CODE1_mask 0x00FFFFFF - -#define BAR11_MASK_default 0x0FF00008 -#define BAR11_MASK_mask 0x8FF00008 - -#define BAR12_MASK_default 0x80001800 -#define BAR12_MASK_mask 0x80001F08 - -#define BAR13_MASK_default 0x8FF00008 -#define BAR13_MASK_mask 0x8FF00008 - -#define BAR14_MASK_default 0x8F000000 -#define BAR14_MASK_mask 0x8FFFFF08 - -#define BAR15_MASK_default 0x80000000 -#define BAR15_MASK_mask 0x8FFFFF08 - -#define BAR16_MASK_default 0x80000001 -// bit 0 and bit 3 is mutually exclusive -#define BAR16_MASK_mask 0x8FFFFFF9 - -#define CARDBUS_CIS_POINTER1_default 0x00000000 -#define CARDBUS_CIS_POINTER1_mask 0x03FFFFFF - -#define SUBSYSTEM_ID1_default 0x0000000C -#define SUBSYSTEM_ID1_mask 0x0000FFFF - -#define PCI_ADDRESS_MAP_11_default 0x18000000 -#define PCI_ADDRESS_MAP_11_mask 0x7FFFFFF1 - -#define PCI_ADDRESS_MAP_12_default 0x18100000 -#define PCI_ADDRESS_MAP_12_mask 0x7FFFFF01 - -#define PCI_ADDRESS_MAP_13_default 0x18200000 -#define PCI_ADDRESS_MAP_13_mask 0x7FF00001 - -#define PCI_ADDRESS_MAP_14_default 0x70000000 -#define PCI_ADDRESS_MAP_14_mask 0x7FFFFF01 - -#define PCI_ADDRESS_MAP_15_default 0x00000001 -#define PCI_ADDRESS_MAP_15_mask 0x7FFFFF01 - -#define PCI_ADDRESS_MAP_16_default 0x60000000 -#define PCI_ADDRESS_MAP_16_mask 0x7FF00001 - -#define FPI_SEGMENT_ENABLE_default 0x000003FF -#define FPI_SEGMENT_ENABLE_mask 0x000003FF - -#define CLASS_CODE2_default 0x00FF0000 -#define CLASS_CODE2_mask 0x00FFFFFF - -#define BAR21_MASK_default 0x80000008 -#define BAR21_MASK_mask 0x8FFFFFF8 - -#define BAR22_MASK_default 0x80000008 -#define BAR22_MASK_mask 0x80001F08 - -#define BAR23_MASK_default 0x80000008 -#define BAR23_MASK_mask 0x8FF00008 - -#define BAR24_MASK_default 0x8FE00000 -#define BAR24_MASK_mask 0x8FFFFF08 - -#define BAR25_MASK_default 0x8FFFF000 -#define BAR25_MASK_mask 0x8FFFFF08 - -#define BAR26_MASK_default 0x8FFFFFE1 -#define BAR26_MASK_mask 0x8FFFFFF1 - -#define CARDBUS_CIS_POINTER2_default 0x00000000 -#define CARDBUS_CIS_POINTER2_mask 0x03FFFFFF - -#define SUBSYSTEM_ID2_default 0x0000000C -#define SUBSYSTEM_ID2_mask 0x0000FFFF - -#define PCI_ADDRESS_MAP_21_default 0x3FE00000 -#define PCI_ADDRESS_MAP_21_mask 0x7FFFFFF1 - -#define PCI_ADDRESS_MAP_22_default 0x68000000 -#define PCI_ADDRESS_MAP_22_mask 0x7FFFFF01 - -#define PCI_ADDRESS_MAP_23_default 0x20000000 -#define PCI_ADDRESS_MAP_23_mask 0x7FF00001 - -#define PCI_ADDRESS_MAP_24_default 0x70000001 -#define PCI_ADDRESS_MAP_24_mask 0x7FFFFF01 - -#define PCI_ADDRESS_MAP_25_default 0x78000001 -#define PCI_ADDRESS_MAP_25_mask 0x7FFFFF01 - -#define PCI_ADDRESS_MAP_26_default 0x20000000 -#define PCI_ADDRESS_MAP_26_mask 0x7FF00001 - -#define FPI_ADDRESS_MASK11LOW_default 0x00000000 -#define FPI_ADDRESS_MASK11LOW_mask 0x00070000 - -#define FPI_ADDRESS_MAP_0_default 0x00000000 -#define FPI_ADDRESS_MAP_0_mask 0xFFF00000 - -#define FPI_ADDRESS_MAP_1_default 0x10000000 -#define FPI_ADDRESS_MAP_1_mask 0xFFF00000 - -#define FPI_ADDRESS_MAP_2_default 0x20000000 -#define FPI_ADDRESS_MAP_2_mask 0xFFF00000 - -#define FPI_ADDRESS_MAP_3_default 0x30000000 -#define FPI_ADDRESS_MAP_3_mask 0xFFF00000 - -#define FPI_ADDRESS_MAP_4_default 0x40000000 -#define FPI_ADDRESS_MAP_4_mask 0xFFF00000 - -#define FPI_ADDRESS_MAP_5_default 0x50000000 -#define FPI_ADDRESS_MAP_5_mask 0xFFF00000 - -#define FPI_ADDRESS_MAP_6_default 0x60000000 -#define FPI_ADDRESS_MAP_6_mask 0xFFF00000 - -#define FPI_ADDRESS_MAP_7_default 0x70000000 -#define FPI_ADDRESS_MAP_7_mask 0xFFF00000 - -#define FPI_ADDRESS_MAP_11LOW_default 0xB0000000 -#define FPI_ADDRESS_MAP_11LOW_mask 0xFFFF0000 - -#define FPI_ADDRESS_MAP_11HIGH_default 0xB8000000 -#define FPI_ADDRESS_MAP_11HIGH_mask 0xFFF80000 - -#define FPI_BURST_LENGTH_default 0x00000000 -#define FPI_BURST_LENGTH_mask 0x00000303 - -#define SET_PCI_SERR_default 0x00000000 -#define SET_PCI_SERR_mask 0x00000000 - -#define DMA_FPI_START_ADDRESS_default 0x00000000 -#define DMA_FPI_START_ADDRESS_mask 0xFFFFFFFF - -#define DMA_PCI_START_ADDRESS_default 0x00000000 -#define DMA_PCI_START_ADDRESS_mask 0xFFFFFFFF - -#define DMA_TRANSFER_COUNT_default 0x00000000 -#define DMA_TRANSFER_COUNT_mask 0x0000FFFF - -#define DMA_CONTROL_STATUS_default 0x00000000 -#define DMA_CONTROL_STATUS_mask 0x00000000 // bit 0,1 is writable - -/***********************************************************************/ -#undef IKOS_MINI_BOOT //don't run a full booting -#ifdef CONFIG_USE_IKOS -#define CONFIG_USE_VENUS //Faster, 10M CPU and 192k baudrate -#ifdef CONFIG_USE_VENUS -#define IKOS_CPU_SPEED 10000000 -#else -#define IKOS_CPU_SPEED 180000 //IKOS is slow -#endif -#endif //CONFIG_USE_IKOS - -/* 165001:henryhsu:20050603:Source Modify form Bing Tao */ - -#if defined(CONFIG_NET_WIRELESS_SPURS) || defined(CONFIG_NET_WIRELESS_SPURS_MODULE) -#define EBU_PCI_SOFTWARE_ARBITOR -#endif - -#define AMAZON_B11 -#ifdef AMAZON_B11 -#define SWITCH_BUF_FPI_ADDR (0x10110000) -#define SWITCH_BUF_ADDR (KSEG1+SWITCH_BUF_FPI_ADDR) -#define SWITCH_BUF_SIZE (0x2800) -#define AMAZON_B11_CBM_QD_ADDR (SWITCH_BUF_ADDR+0x0) -#define AMAZON_B11_BOND_CELL_ADDR (SWITCH_BUF_ADDR+0x000) -#endif -#define AMAZON_REFERENCE_BOARD -//for AMAZON ATM bonding application -#ifdef AMAZON_REFERENCE_BOARD -#define GPIO_DETECT_LOW -#else -#undef GPIO_DETECT_LOW -#endif - -/* 165001 */ - -#undef AMAZON_IKOS_DEBUG_MSG -#undef AMAZON_INT_DEBUG_MSG -#undef AMAZON_ATM_DEBUG_MSG -#undef AMAZON_DMA_DEBUG_MSG -#undef AMAZON_SW_DEBUG_MSG -#undef AMAZON_WDT_DEBUG_MSG -#undef AMAZON_MTD_DEBUG_MSG -#undef AMAZON_SSC_DEBUG_MSG -#undef AMAZON_MEI_DEBUG_MSG - -#ifdef AMAZON_IKOS_DEBUG_MSG -#define AMAZON_IKOS_DMSG(fmt,args...) printk("%s:" fmt, __FUNCTION__, ##args) -#else -#define AMAZON_IKOS_DMSG(fmt,args...) -#endif - -#ifdef AMAZON_WDT_DEBUG_MSG -#define AMAZON_WDT_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args) -#else -#define AMAZON_WDT_DMSG(fm,args...) -#endif - -#ifdef AMAZON_SSC_DEBUG_MSG -#define AMAZON_SSC_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args) -#else -#define AMAZON_SSC_DMSG(fm,args...) -#endif - -#ifdef AMAZON_DMA_DEBUG_MSG -#define AMAZON_DMA_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args) -#else -#define AMAZON_DMA_DMSG(fm,args...) -#endif - -#ifdef AMAZON_ATM_DEBUG_MSG -#define AMAZON_TPE_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args) -#else //not AMAZON_ATM_DEBUG -#define AMAZON_TPE_DMSG(fmt, args...) -#endif //AMAZON_ATM_DEBUG - -#ifdef AMAZON_SW_DEBUG_MSG -#define AMAZON_SW_DMSG(fmt,args...) printk("%s: " fmt, __FUNCTION__ , ##args) -#else -#define AMAZON_SW_DMSG(fmt,args...) -#endif - -#ifdef AMAZON_MTD_DEBUG_MSG -#define AMAZON_MTD_DMSG(fmt,args...) printk("%s: " fmt, __FUNCTION__ , ##args) -#else -#define AMAZON_MTD_DMSG(fmt,args...) -#endif - -#ifdef AMAZON_INT_DEBUG_MSG -#define AMAZON_INT_DMSG(x...) printk(x) -#else -#define AMAZON_INT_DMSG(x...) -#endif - -#ifdef AMAZON_MEI_DEBUG_MSG -#define AMAZON_MEI_DMSG(fmt,args...) printk("%s:" fmt, __FUNCTION__, ##args) -#else -#define AMAZON_MEI_DMSG(fmt,args...) -#endif - -#endif //AMAZON_H diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_dma.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_dma.h deleted file mode 100644 index 63ab5924e5..0000000000 --- a/target/linux/amazon/files/include/asm-mips/amazon/amazon_dma.h +++ /dev/null @@ -1,148 +0,0 @@ -#ifndef AMAZON_DMA_H -#define AMAZON_DMA_H - -#define RCV_INT 1 -#define TX_BUF_FULL_INT 2 -#define TRANSMIT_CPT_INT 4 - -#define QOS_DEFAULT_WGT 0x7fffffffUL; - - -enum attr_t{ - TX=0, - RX=1, - RESERVED=2, - DEFAULT=3, - -}; - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -typedef struct rx_desc{ - u32 data_length:16; - volatile u32 reserved:7; - volatile u32 byte_offset:2; - volatile u32 Burst_length_offset:3; - volatile u32 EoP:1; - volatile u32 Res:1; - volatile u32 C:1; - volatile u32 OWN:1; - volatile u32 Data_Pointer; - /*fix me:should be 28 bits here, 32 bits just for host simulatiuon purpose*/ -}_rx_desc; - - -typedef struct tx_desc{ - volatile u32 data_length:16; - volatile u32 reserved1:7; - volatile u32 byte_offset:5; - volatile u32 EoP:1; - volatile u32 SoP:1; - volatile u32 C:1; - volatile u32 OWN:1; - volatile u32 Data_Pointer;//fix me:should be 28 bits here -}_tx_desc; -#else //BIG -typedef struct rx_desc{ - union - { - struct - { - volatile u32 OWN :1; - volatile u32 C :1; - volatile u32 SoP :1; - volatile u32 EoP :1; - volatile u32 Burst_length_offset :3; - volatile u32 byte_offset :2; - volatile u32 reserve :7; - volatile u32 data_length :16; - }field; - - volatile u32 word; - }status; - - volatile u32 Data_Pointer; -}_rx_desc; - - -typedef struct tx_desc{ - union - { - struct - { - volatile u32 OWN :1; - volatile u32 C :1; - volatile u32 SoP :1; - volatile u32 EoP :1; - volatile u32 byte_offset :5; - volatile u32 reserved :7; - volatile u32 data_length :16; - }field; - - volatile u32 word; - }status; - - volatile u32 Data_Pointer; -}_tx_desc; - -#endif //ENDIAN - -struct dma_channel_info{ - /*filled by driver, optional*/ - enum attr_t attr;/*TX or RX*/ - int weight; - int desc_num; - int packet_size; - int control;/*on or off*/ - - int desc_base; - int status; -}; - -typedef struct dma_channel_info _dma_channel_info; - -struct dma_device_info{ - /*variables*/ - /*filled by driver, compulsary*/ - char device_name[15]; - enum attr_t attr;/*default or else*/ - int tx_burst_len; - int rx_burst_len; - - int logic_rx_chan_base; - int logic_tx_chan_base; - u8 on_ch_bit; - /*filled by driver, optional*/ - int weight; - int current_tx_chan; - int current_rx_chan; - int num_tx_chan; - int num_rx_chan; - struct dma_channel_info tx_chan[2]; - struct dma_channel_info rx_chan[4]; - - /*functions, optional*/ - u8* (*buffer_alloc)(int len,int* offset, void** opt); - int (*buffer_free)(u8* dataptr, void* opt); - int (*intr_handler)(struct dma_device_info* info, int status); - /*set by device, clear by dma*/ - int ack; - void * priv; /* used by peripheral driver only */ -}; -typedef struct dma_device_info _dma_device_info; - -int dma_device_register(struct dma_device_info* info); - -int dma_device_unregister(struct dma_device_info* info); - -int dma_device_read(struct dma_device_info* info, u8** dataptr, void** opt); - -int dma_device_write(struct dma_device_info* info, u8* dataptr, int len, void* opt); - -int dma_device_update(struct dma_device_info* info); - -void dma_device_update_rx(struct dma_device_info* dma_dev); - -void dma_device_update_tx(struct dma_device_info* dma_dev); - -void register_handler_sim(int (*handler)(int)); -#endif /* AMAZON_DMA_H */ diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei.h deleted file mode 100644 index 6ac8ab310b..0000000000 --- a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei.h +++ /dev/null @@ -1,220 +0,0 @@ -#ifndef _AMAZON_MEI_H -#define _AMAZON_MEI_H -///////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#include "amazon_mei_app.h" - -#define AMAZON_MEI_DEBUG_ON -#define AMAZON_MEI_CMV_EXTRA - -#define AMAZON_MEI_MAJOR 106 - -/* -** Define where in ME Processor's memory map the Stratify chip lives -*/ -#define MEI_SPACE_ACCESS 0xB0100C00 - -#define MAXSWAPSIZE 8 * 1024 //8k *(32bits) -//#define AMAZON_ADSL_IMAGESIZE 16*1024 // 16k * (32bits) - - -// Mailboxes -#define MSG_LENGTH 16 // x16 bits -#define YES_REPLY 1 -#define NO_REPLY 0 - -#define CMV_TIMEOUT 100 //jiffies -#define MIB_INTERVAL 10000 //msec - -/*** Bit definitions ***/ - -#define FALSE 0 -#define TRUE 1 -#define BIT0 1<<0 -#define BIT1 1<<1 -#define BIT2 1<<2 -#define BIT3 1<<3 -#define BIT4 1<<4 -#define BIT5 1<<5 -#define BIT6 1<<6 -#define BIT7 1<<7 -#define BIT8 1<<8 -#define BIT9 1<<9 -#define BIT10 1<<10 -#define BIT11 1<<11 -#define BIT12 1<<12 -#define BIT13 1<<13 -#define BIT14 1<<14 -#define BIT15 1<<15 -#define BIT16 1<<16 -#define BIT17 1<<17 -#define BIT18 1<<18 -#define BIT19 1<<19 -#define BIT20 1<<20 -#define BIT21 1<<21 -#define BIT22 1<<22 -#define BIT23 1<<23 -#define BIT24 1<<24 -#define BIT25 1<<25 -#define BIT26 1<<26 -#define BIT27 1<<27 -#define BIT28 1<<28 -#define BIT29 1<<29 -#define BIT30 1<<30 -#define BIT31 1<<31 - - -/*** Register address offsets, relative to MEI_SPACE_ADDRESS ***/ -#define MEI_DATA_XFR (0x0000 + MEI_SPACE_ACCESS) -#define MEI_VERSION (0x0200 + MEI_SPACE_ACCESS) -#define ARC_GP_STAT (0x0204 + MEI_SPACE_ACCESS) -#define MEI_XFR_ADDR (0x020C + MEI_SPACE_ACCESS) -#define MEI_TO_ARC_INT (0x021C + MEI_SPACE_ACCESS) -#define ARC_TO_MEI_INT (0x0220 + MEI_SPACE_ACCESS) -#define ARC_TO_MEI_INT_MASK (0x0224 + MEI_SPACE_ACCESS) -#define MEI_DEBUG_WAD (0x0228 + MEI_SPACE_ACCESS) -#define MEI_DEBUG_RAD (0x022C + MEI_SPACE_ACCESS) -#define MEI_DEBUG_DATA (0x0230 + MEI_SPACE_ACCESS) -#define MEI_DEBUG_DEC (0x0234 + MEI_SPACE_ACCESS) -#define MEI_CONTROL (0x0238 + MEI_SPACE_ACCESS) -#define AT_CELLRDY_BC0 (0x023C + MEI_SPACE_ACCESS) -#define AT_CELLRDY_BC1 (0x0240 + MEI_SPACE_ACCESS) -#define AR_CELLRDY_BC0 (0x0244 + MEI_SPACE_ACCESS) -#define AR_CELLRDY_BC1 (0x0248 + MEI_SPACE_ACCESS) -#define AAI_ACCESS (0x024C + MEI_SPACE_ACCESS) -#define AAITXCB0 (0x0300 + MEI_SPACE_ACCESS) -#define AAITXCB1 (0x0304 + MEI_SPACE_ACCESS) -#define AAIRXCB0 (0x0308 + MEI_SPACE_ACCESS) -#define AAIRXCB1 (0x030C + MEI_SPACE_ACCESS) - - -// MEI_TO_ARC_INTERRUPT Register definitions -#define MEI_TO_ARC_INT1 BIT3 -#define MEI_TO_ARC_INT0 BIT2 -#define MEI_TO_ARC_CS_DONE BIT1 -#define MEI_TO_ARC_MSGAV BIT0 - -// ARC_TO_MEI_INTERRUPT Register definitions -#define ARC_TO_MEI_INT1 BIT8 -#define ARC_TO_MEI_INT0 BIT7 -#define ARC_TO_MEI_CS_REQ BIT6 -#define ARC_TO_MEI_DBG_DONE BIT5 -#define ARC_TO_MEI_MSGACK BIT4 -#define ARC_TO_MEI_NO_ACCESS BIT3 -#define ARC_TO_MEI_CHECK_AAITX BIT2 -#define ARC_TO_MEI_CHECK_AAIRX BIT1 -#define ARC_TO_MEI_MSGAV BIT0 - -// ARC_TO_MEI_INTERRUPT_MASK Register definitions -#define GP_INT1_EN BIT8 -#define GP_INT0_EN BIT7 -#define CS_REQ_EN BIT6 -#define DBG_DONE_EN BIT5 -#define MSGACK_EN BIT4 -#define NO_ACC_EN BIT3 -#define AAITX_EN BIT2 -#define AAIRX_EN BIT1 -#define MSGAV_EN BIT0 - -// MEI_CONTROL Register definitions -#define INT_LEVEL BIT2 -#define SOFT_RESET BIT1 -#define HOST_MSTR BIT0 - -// MEI_DEBUG_DECODE Register definitions -#define MEI_DEBUG_DEC_MASK (0x3) -#define MEI_DEBUG_DEC_AUX_MASK (0x0) -#define MEI_DEBUG_DEC_DMP1_MASK (0x1) -#define MEI_DEBUG_DEC_DMP2_MASK (0x2) -#define MEI_DEBUG_DEC_CORE_MASK (0x3) - - -// ARC_TO_MEI_MAILBOX[11] is a special location used to indicate -// page swap requests. -#define MEI_TO_ARC_MAILBOX (0x15FC0) -#define MEI_TO_ARC_MAILBOXR (0x15FEC) -#define ARC_TO_MEI_MAILBOX (0x15F90) -#define ARC_MEI_MAILBOXR (0x15FBC) - -// Codeswap request messages are indicated by setting BIT31 -#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK (0x80000000) - -/* -** Swap page header -*/ -// Page must be loaded at boot time if size field has BIT31 set -#define BOOT_FLAG (BIT31) -#define BOOT_FLAG_MASK ~BOOT_FLAG - -// Swap page header describes size in 32-bit words, load location, and image offset -// for program and/or data segments -typedef struct _arc_swp_page_hdr -{ - u32 p_offset; // Offset bytes of progseg from beginning of image - u32 p_dest; // Destination addr of progseg on processor - u32 p_size; // Size in 32-bitwords of program segment - u32 d_offset; // Offset bytes of dataseg from beginning of image - u32 d_dest; // Destination addr of dataseg on processor - u32 d_size; // Size in 32-bitwords of data segment -}ARC_SWP_PAGE_HDR; - - -/* -** Swap image header -*/ -#define GET_PROG 0 // Flag used for program mem segment -#define GET_DATA 1 // Flag used for data mem segment - -// Image header contains size of image, checksum for image, and count of -// page headers. Following that are 'count' page headers followed by -// the code and/or data segments to be loaded -typedef struct _arc_img_hdr -{ - u32 size; // Size of binary image in bytes - u32 checksum; // Checksum for image - u32 count; // Count of swp pages in image - ARC_SWP_PAGE_HDR page[1]; // Should be "count" pages - '1' to make compiler happy -}ARC_IMG_HDR; - - - -/* -** Native size for the Stratiphy interface is 32-bits. All reads and writes -** MUST be aligned on 32-bit boundaries. Trickery must be invoked to read word and/or -** byte data. Read routines are provided. Write routines are probably a bad idea, as the -** Arc has unrestrained, unseen access to the same memory, so a read-modify-write cycle -** could very well have unintended results. -*/ -MEI_ERROR meiCMV(u16 *, int); // first arg is CMV to ARC, second to indicate whether need reply - -void meiLongwordWrite(u32 ul_address, u32 ul_data); -void meiLongwordRead(u32 ul_address, u32 *pul_data); - - -MEI_ERROR meiDMAWrite(u32 destaddr, u32 *databuff, u32 databuffsize); -MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize); - -MEI_ERROR meiDMARead(u32 srcaddr, u32 *databuff, u32 databuffsize); -MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize); - -void meiPollForDbgDone(void); - -void meiMailboxInterruptsDisable(void); -void meiMailboxInterruptsEnable(void); - -MEI_ERROR meiMailboxWrite(u16 *msgsrcbuffer, u16 msgsize); -MEI_ERROR meiMailboxRead(u16 *msgdestbuffer, u16 msgsize); - -int meiGetPage( u32 Page, u32 data, u32 MaxSize, u32 *Buffer, u32 *Dest); - -MEI_ERROR meiHaltArc(void); -MEI_ERROR meiRunArc(void); - -MEI_ERROR meiDownloadBootCode(void); - -MEI_ERROR meiForceRebootAdslModem(void); - -void makeCMV(u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data); - -#endif - diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app.h deleted file mode 100644 index 89700d9d76..0000000000 --- a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app.h +++ /dev/null @@ -1,54 +0,0 @@ -//509221:tc.chen 2005/09/22 Reset DFE added when MEI_TO_ARC_CS_DONE not cleared by ARC and Added AMAZON_MEI_DEBUG_MODE ioctl - -#ifndef _AMAZON_MEI_APP_H -#define _AMAZON_MEI_APP_H - -///////////////////////////////////////////////////////////////////////////////////////////////////// - - // ioctl control -#define AMAZON_MEI_START 300 -#define AMAZON_MEI_REPLY 301 -#define AMAZON_MEI_NOREPLY 302 - -#define AMAZON_MEI_RESET 303 -#define AMAZON_MEI_REBOOT 304 -#define AMAZON_MEI_HALT 305 -#define AMAZON_MEI_CMV_WINHOST 306 -#define AMAZON_MEI_CMV_READ 307 -#define AMAZON_MEI_CMV_WRITE 308 -#define AMAZON_MEI_MIB_DAEMON 309 -#define AMAZON_MEI_SHOWTIME 310 -#define AMAZON_MEI_REMOTE 311 -#define AMAZON_MEI_READDEBUG 312 -#define AMAZON_MEI_WRITEDEBUG 313 -#define AMAZON_MEI_LOP 314 - -#define AMAZON_MEI_PCM_SETUP 315 -#define AMAZON_MEI_PCM_START_TIMER 316 -#define AMAZON_MEI_PCM_STOP_TIMER 317 -#define AMAZON_MEI_PCM_CHECK 318 -#define AMAZON_MEI_GET_EOC_LEN 319 -#define AMAZON_MEI_GET_EOC_DATA 320 -#define AMAZON_MEI_PCM_GETDATA 321 -#define AMAZON_MEI_PCM_GPIO 322 -#define AMAZON_MEI_EOC_SEND 323 -//MIB -#define AMAZON_MIB_LO_ATUC 324 -#define AMAZON_MIB_LO_ATUR 325 -#define AMAZON_MEI_DOWNLOAD 326 - -#define AMAZON_MEI_DEBUG_MODE 327 //509221:tc.chen -#define LOOP_DIAGNOSTIC_MODE_COMPLETE 328 - - -/*** Enums ***/ -typedef enum mei_error -{ - MEI_SUCCESS = 0, - MEI_FAILURE = -1, - MEI_MAILBOX_FULL = -2, - MEI_MAILBOX_EMPTY = -3, - MEI_MAILBOX_TIMEOUT = -4, -}MEI_ERROR; - -#endif diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h deleted file mode 100644 index d98f60b171..0000000000 --- a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h +++ /dev/null @@ -1,1169 +0,0 @@ -// 603221:tc.chen 2006/03/21 added APIs to support the WEB related parameters for ADSL Statistics - -#ifndef __AMAZON_MEI_APP_IOCTL_H -#define __AMAZON_MEI_APP_IOCTL_H - -#ifdef __KERNEL__ -#include "amazon_mei_ioctl.h" -#endif - -/* Interface Name */ -//#define INTERFACE_NAME <define the interface> - -/* adslLineTable constants */ -#define GET_ADSL_LINE_CODE 1 - -/* adslAtucPhysTable constants */ -#define GET_ADSL_ATUC_PHY 4 - -/* adslAturPhysTable constants */ -#define GET_ADSL_ATUR_PHY 10 - -/* adslAtucChanTable constants */ -#define GET_ADSL_ATUC_CHAN_INFO 15 - -/* adslAturChanTable constants */ -#define GET_ADSL_ATUR_CHAN_INFO 18 - -/* adslAtucPerfDataTable constants */ -#define GET_ADSL_ATUC_PERF_DATA 21 - -/* adslAturPerfDataTable constants */ -#define GET_ADSL_ATUR_PERF_DATA 40 - -/* adslAtucIntervalTable constants */ -#define GET_ADSL_ATUC_INTVL_INFO 60 - -/* adslAturIntervalTable constants */ -#define GET_ADSL_ATUR_INTVL_INFO 65 - -/* adslAtucChanPerfDataTable constants */ -#define GET_ADSL_ATUC_CHAN_PERF_DATA 70 - -/* adslAturChanPerfDataTable constants */ -#define GET_ADSL_ATUR_CHAN_PERF_DATA 90 - -/* adslAtucChanIntervalTable constants */ -#define GET_ADSL_ATUC_CHAN_INTVL_INFO 110 - -/* adslAturChanIntervalTable constants */ -#define GET_ADSL_ATUR_CHAN_INTVL_INFO 115 - -/* adslLineAlarmConfProfileTable constants */ -#define GET_ADSL_ALRM_CONF_PROF 120 -#define SET_ADSL_ALRM_CONF_PROF 121 - -/* adslAturTrap constants */ -#define ADSL_ATUR_TRAPS 135 - -////////////////// RFC-3440 ////////////// - -#ifdef AMAZON_MEI_MIB_RFC3440 -/* adslLineExtTable */ -#define GET_ADSL_ATUC_LINE_EXT 201 -#define SET_ADSL_ATUC_LINE_EXT 203 - -/* adslAtucPerfDateExtTable */ -#define GET_ADSL_ATUC_PERF_DATA_EXT 205 - -/* adslAtucIntervalExtTable */ -#define GET_ADSL_ATUC_INTVL_EXT_INFO 221 - -/* adslAturPerfDataExtTable */ -#define GET_ADSL_ATUR_PERF_DATA_EXT 225 - -/* adslAturIntervalExtTable */ -#define GET_ADSL_ATUR_INTVL_EXT_INFO 233 - -/* adslAlarmConfProfileExtTable */ -#define GET_ADSL_ALRM_CONF_PROF_EXT 235 -#define SET_ADSL_ALRM_CONF_PROF_EXT 236 - -/* adslAturExtTrap */ -#define ADSL_ATUR_EXT_TRAPS 240 - -#endif - -// 603221:tc.chen start -/* The following constants are added to support the WEB related ADSL Statistics */ - -/* adslLineStatus constants */ -#define GET_ADSL_LINE_STATUS 245 - -/* adslLineRate constants */ -#define GET_ADSL_LINE_RATE 250 - -/* adslLineInformation constants */ -#define GET_ADSL_LINE_INFO 255 - -/* adslNearEndPerformanceStats constants */ -#define GET_ADSL_NEAREND_STATS 270 - -/* adslFarEndPerformanceStats constants */ -#define GET_ADSL_FAREND_STATS 290 - -// 603221:tc.chen end - -/* Loop diagnostics mode of the ADSL line related constants */ -#define GET_ADSL_LOOP_DIAGNOSTICS_MODE 295 -#define SET_ADSL_LOOP_DIAGNOSTICS_MODE 296 -#define IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE 299 - -/* Sub-carrier related parameters */ -#define GET_ADSL_ATUC_SUBCARRIER_STATS 297 -#define GET_ADSL_ATUR_SUBCARRIER_STATS 298 -#define GET_ADSL_LINE_INIT_STATS 150 -#define GET_ADSL_POWER_SPECTRAL_DENSITY 151 - - -/////////////////////////////////////////////////////////// -// makeCMV(Opcode, Group, Address, Index, Size, Data) - -/* adslLineCode Flags */ -#define LINE_CODE_FLAG 0x1 /* BIT 0th position */ - -/* adslAtucPhysTable Flags */ -#define ATUC_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */ -#define ATUC_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 57, 0, 12, data) -#define ATUC_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 57, 12, 4, data) - -#define ATUC_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */ -#define ATUC_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 64, 0, 4, data) - -#define ATUC_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */ -#define ATUC_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 58, 0, 8, data) - -#define ATUC_CURR_STAT_FLAG 0x8 /* BIT 3 */ - -#define ATUC_CURR_OUT_PWR_FLAG 0x10 /* BIT 4 */ -#define ATUC_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 5, 1, data) - -#define ATUC_CURR_ATTR_FLAG 0x20 /* BIT 5 */ -#define ATUC_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 0, 2, data) - - -/* adslAturPhysTable Flags */ -#define ATUR_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */ -#define ATUR_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 62, 0, 12, data) -#define ATUR_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 62, 12, 4, data) - -#define ATUR_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */ -#define ATUR_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 65, 0, 4, data) - -#define ATUR_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */ -#define ATUR_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 61, 0, 8, data) - -#define ATUR_SNRMGN_FLAG 0x8 -#define ATUR_SNRMGN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 1, data) - -#define ATUR_ATTN_FLAG 0x10 -#define ATUR_ATTN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data) - -#define ATUR_CURR_STAT_FLAG 0x20 /* BIT 3 */ - -#define ATUR_CURR_OUT_PWR_FLAG 0x40 /* BIT 4 */ -#define ATUR_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 5, 1, data) - -#define ATUR_CURR_ATTR_FLAG 0x80 /* BIT 5 */ -#define ATUR_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 0, 2, data) - -/* adslAtucChanTable Flags */ -#define ATUC_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */ -#define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 1, 1, data) - -#define ATUC_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */ -#define ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data) - -#define ATUC_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */ - -/* adslAturChanTable Flags */ -#define ATUR_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */ -#define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 2, 1, 1, data) - -#define ATUR_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */ -#define ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data) - -#define ATUR_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */ - -#define ATUR_CHAN_CRC_BLK_LEN_FLAG 0x8 /* BIT 3 */ - -/* adslAtucPerfDataTable Flags */ -#define ATUC_PERF_LOFS_FLAG 0x1 /* BIT 0th position */ -#define ATUC_PERF_LOSS_FLAG 0x2 /* BIT 1 */ -#define ATUC_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data) -#define ATUC_PERF_ESS_FLAG 0x4 /* BIT 2 */ -#define ATUC_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data) -#define ATUC_PERF_INITS_FLAG 0x8 /* BIT 3 */ -#define ATUC_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */ -#define ATUC_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */ -#define ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ -#define ATUC_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */ -#define ATUC_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */ -#define ATUC_PERF_CURR_15MIN_ESS_FLAG 0x200 /* BIT 9 */ -#define ATUC_PERF_CURR_15MIN_INIT_FLAG 0x400 /* BIT 10 */ -#define ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */ -#define ATUC_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */ -#define ATUC_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */ -#define ATUC_PERF_CURR_1DAY_ESS_FLAG 0x4000 /* BIT 14 */ -#define ATUC_PERF_CURR_1DAY_INIT_FLAG 0x8000 /* BIT 15 */ -#define ATUC_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */ -#define ATUC_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */ -#define ATUC_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */ -#define ATUC_PERF_PREV_1DAY_ESS_FLAG 0x80000 /* BIT 19 */ -#define ATUC_PERF_PREV_1DAY_INITS_FLAG 0x100000 /* BIT 20 */ - -/* adslAturPerfDataTable Flags */ -#define ATUR_PERF_LOFS_FLAG 0x1 /* BIT 0th position */ -#define ATUR_PERF_LOSS_FLAG 0x2 /* BIT 1 */ -#define ATUR_PERF_LPR_FLAG 0x4 /* BIT 2 */ -#define ATUR_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data) -#define ATUR_PERF_ESS_FLAG 0x8 /* BIT 3 */ -#define ATUR_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data) -#define ATUR_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */ -#define ATUR_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */ -#define ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ -#define ATUR_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */ -#define ATUR_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */ -#define ATUR_PERF_CURR_15MIN_LPR_FLAG 0x200 /* BIT 9 */ -#define ATUR_PERF_CURR_15MIN_ESS_FLAG 0x400 /* BIT 10 */ -#define ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */ -#define ATUR_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */ -#define ATUR_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */ -#define ATUR_PERF_CURR_1DAY_LPR_FLAG 0x4000 /* BIT 14 */ -#define ATUR_PERF_CURR_1DAY_ESS_FLAG 0x8000 /* BIT 15 */ -#define ATUR_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */ -#define ATUR_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */ -#define ATUR_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */ -#define ATUR_PERF_PREV_1DAY_LPR_FLAG 0x80000 /* BIT 19 */ -#define ATUR_PERF_PREV_1DAY_ESS_FLAG 0x100000 /* BIT 20 */ - -/* adslAtucIntervalTable Flags */ -#define ATUC_INTVL_LOF_FLAG 0x1 /* BIT 0th position */ -#define ATUC_INTVL_LOS_FLAG 0x2 /* BIT 1 */ -#define ATUC_INTVL_ESS_FLAG 0x4 /* BIT 2 */ -#define ATUC_INTVL_INIT_FLAG 0x8 /* BIT 3 */ -#define ATUC_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */ - -/* adslAturIntervalTable Flags */ -#define ATUR_INTVL_LOF_FLAG 0x1 /* BIT 0th position */ -#define ATUR_INTVL_LOS_FLAG 0x2 /* BIT 1 */ -#define ATUR_INTVL_LPR_FLAG 0x4 /* BIT 2 */ -#define ATUR_INTVL_ESS_FLAG 0x8 /* BIT 3 */ -#define ATUR_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */ - -/* adslAtucChanPerfDataTable Flags */ -#define ATUC_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */ -#define ATUC_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */ -#define ATUC_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */ -#define ATUC_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */ -#define ATUC_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */ -#define ATUC_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */ -#define ATUC_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ -#define ATUC_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */ -#define ATUC_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */ -#define ATUC_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */ -#define ATUC_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */ -#define ATUC_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11*/ -#define ATUC_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */ -#define ATUC_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */ -#define ATUC_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */ -#define ATUC_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */ -#define ATUC_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */ -#define ATUC_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */ -#define ATUC_CHAN_PERF_PREV_1DAY_TX_BLK_FLAG 0x40000 /* BIT 18 */ -#define ATUC_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */ -#define ATUC_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */ - - -/* adslAturChanPerfDataTable Flags */ -#define ATUR_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */ -#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data) -#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data) -#define ATUR_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */ -#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data) -#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data) -#define ATUR_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */ -#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data) -#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data) -#define ATUR_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */ -#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data) -#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data) -#define ATUR_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */ -#define ATUR_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */ -#define ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ -#define ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */ -#define ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */ -#define ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */ -#define ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */ -#define ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */ -#define ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */ -#define ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */ -#define ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */ -#define ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */ -#define ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */ -#define ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */ -#define ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG 0x40000 /* BIT 18 */ -#define ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */ -#define ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */ - -/* adslAtucChanIntervalTable Flags */ -#define ATUC_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th position */ -#define ATUC_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */ -#define ATUC_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */ -#define ATUC_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */ -#define ATUC_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */ -#define ATUC_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */ - -/* adslAturChanIntervalTable Flags */ -#define ATUR_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th Position */ -#define ATUR_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */ -#define ATUR_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */ -#define ATUR_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */ -#define ATUR_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */ -#define ATUR_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */ - -/* adslLineAlarmConfProfileTable Flags */ -#define ATUC_THRESH_15MIN_LOFS_FLAG 0x01 /* BIT 0th position */ -#define ATUC_THRESH_15MIN_LOSS_FLAG 0x02 /* BIT 1 */ -#define ATUC_THRESH_15MIN_ESS_FLAG 0x04 /* BIT 2 */ -#define ATUC_THRESH_FAST_RATEUP_FLAG 0x08 /* BIT 3 */ -#define ATUC_THRESH_INTERLEAVE_RATEUP_FLAG 0x10 /* BIT 4 */ -#define ATUC_THRESH_FAST_RATEDOWN_FLAG 0x20 /* BIT 5 */ -#define ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x40 /* BIT 6 */ -#define ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG 0x80 /* BIT 7 */ -#define ATUR_THRESH_15MIN_LOFS_FLAG 0x100 /* BIT 8 */ -#define ATUR_THRESH_15MIN_LOSS_FLAG 0x200 /* BIT 9 */ -#define ATUR_THRESH_15MIN_LPRS_FLAG 0x400 /* BIT 10 */ -#define ATUR_THRESH_15MIN_ESS_FLAG 0x800 /* BIT 11 */ -#define ATUR_THRESH_FAST_RATEUP_FLAG 0x1000 /* BIT 12 */ -#define ATUR_THRESH_INTERLEAVE_RATEUP_FLAG 0x2000 /* BIT 13 */ -#define ATUR_THRESH_FAST_RATEDOWN_FLAG 0x4000 /* BIT 14 */ -#define ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x8000 /* BIT 15 */ -#define LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG 0x10000 /* BIT 16 */ - - -/* adslAturTraps Flags */ -#define ATUC_PERF_LOFS_THRESH_FLAG 0x1 /* BIT 0th position */ -#define ATUC_PERF_LOSS_THRESH_FLAG 0x2 /* BIT 1 */ -#define ATUC_PERF_ESS_THRESH_FLAG 0x4 /* BIT 2 */ -#define ATUC_RATE_CHANGE_FLAG 0x8 /* BIT 3 */ -#define ATUR_PERF_LOFS_THRESH_FLAG 0x10 /* BIT 4 */ -#define ATUR_PERF_LOSS_THRESH_FLAG 0x20 /* BIT 5 */ -#define ATUR_PERF_LPRS_THRESH_FLAG 0x40 /* BIT 6 */ -#define ATUR_PERF_ESS_THRESH_FLAG 0x80 /* BIT 7 */ -#define ATUR_RATE_CHANGE_FLAG 0x100 /* BIT 8 */ - -//RFC- 3440 FLAG DEFINITIONS - -#ifdef AMAZON_MEI_MIB_RFC3440 -/* adslLineExtTable flags */ -#define ATUC_LINE_TRANS_CAP_FLAG 0x1 /* BIT 0th position */ -#define ATUC_LINE_TRANS_CAP_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data) -#define ATUC_LINE_TRANS_CONFIG_FLAG 0x2 /* BIT 1 */ -#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data) -#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR makeCMV(H2D_CMV_WRITE,INFO, 67, 0, 1, data) -#define ATUC_LINE_TRANS_ACTUAL_FLAG 0x4 /* BIT 2 */ -#define ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 1, 0, 1, data) -#define LINE_GLITE_POWER_STATE_FLAG 0x8 /* BIT 3 */ -#define LINE_GLITE_POWER_STATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 0, 0, 1, data) - -/* adslAtucPerfDataExtTable flags */ -#define ATUC_PERF_STAT_FASTR_FLAG 0x1 /* BIT 0th position */ -#define ATUC_PERF_STAT_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data) -#define ATUC_PERF_STAT_FAILED_FASTR_FLAG 0x2 /* BIT 1 */ -#define ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data) -#define ATUC_PERF_STAT_SESL_FLAG 0X4 /* BIT 2 */ -#define ATUC_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data) -#define ATUC_PERF_STAT_UASL_FLAG 0X8 /* BIT 3 */ -#define ATUC_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data) -#define ATUC_PERF_CURR_15MIN_FASTR_FLAG 0X10 /* BIT 4 */ -#define ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG 0X20 /* BIT 5 */ -#define ATUC_PERF_CURR_15MIN_SESL_FLAG 0X40 /* BIT 6 */ -#define ATUC_PERF_CURR_15MIN_UASL_FLAG 0X80 /* BIT 7 */ -#define ATUC_PERF_CURR_1DAY_FASTR_FLAG 0X100 /* BIT 8 */ -#define ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG 0X200 /* BIT 9 */ -#define ATUC_PERF_CURR_1DAY_SESL_FLAG 0X400 /* BIT 10 */ -#define ATUC_PERF_CURR_1DAY_UASL_FLAG 0X800 /* BIT 11 */ -#define ATUC_PERF_PREV_1DAY_FASTR_FLAG 0X1000 /* BIT 12 */ -#define ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG 0X2000 /* BIT 13 */ -#define ATUC_PERF_PREV_1DAY_SESL_FLAG 0X4000 /* BIT 14 */ -#define ATUC_PERF_PREV_1DAY_UASL_FLAG 0X8000 /* BIT 15 */ - -/* adslAturPerfDataExtTable */ -#define ATUR_PERF_STAT_SESL_FLAG 0X1 /* BIT 0th position */ -#define ATUR_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data) -#define ATUR_PERF_STAT_UASL_FLAG 0X2 /* BIT 1 */ -#define ATUR_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data) -#define ATUR_PERF_CURR_15MIN_SESL_FLAG 0X4 /* BIT 2 */ -#define ATUR_PERF_CURR_15MIN_UASL_FLAG 0X8 /* BIT 3 */ -#define ATUR_PERF_CURR_1DAY_SESL_FLAG 0X10 /* BIT 4 */ -#define ATUR_PERF_CURR_1DAY_UASL_FLAG 0X20 /* BIT 5 */ -#define ATUR_PERF_PREV_1DAY_SESL_FLAG 0X40 /* BIT 6 */ -#define ATUR_PERF_PREV_1DAY_UASL_FLAG 0X80 /* BIT 7 */ - -/* adslAutcIntervalExtTable flags */ -#define ATUC_INTERVAL_FASTR_FLAG 0x1 /* Bit 0 */ -#define ATUC_INTERVAL_FAILED_FASTR_FLAG 0x2 /* Bit 1 */ -#define ATUC_INTERVAL_SESL_FLAG 0x4 /* Bit 2 */ -#define ATUC_INTERVAL_UASL_FLAG 0x8 /* Bit 3 */ - -/* adslAturIntervalExtTable */ -#define ATUR_INTERVAL_SESL_FLAG 0X1 /* BIT 0th position */ -#define ATUR_INTERVAL_UASL_FLAG 0X2 /* BIT 1 */ - -/* adslAlarmConfProfileExtTable */ -#define ATUC_THRESH_15MIN_FAILED_FASTR_FLAG 0X1/* BIT 0th position */ -#define ATUC_THRESH_15MIN_SESL_FLAG 0X2 /* BIT 1 */ -#define ATUC_THRESH_15MIN_UASL_FLAG 0X4 /* BIT 2 */ -#define ATUR_THRESH_15MIN_SESL_FLAG 0X8 /* BIT 3 */ -#define ATUR_THRESH_15MIN_UASL_FLAG 0X10 /* BIT 4 */ - -/* adslAturExtTraps */ -#define ATUC_15MIN_FAILED_FASTR_TRAP_FLAG 0X1 /* BIT 0th position */ -#define ATUC_15MIN_SESL_TRAP_FLAG 0X2 /* BIT 1 */ -#define ATUC_15MIN_UASL_TRAP_FLAG 0X4 /* BIT 2 */ -#define ATUR_15MIN_SESL_TRAP_FLAG 0X8 /* BIT 3 */ -#define ATUR_15MIN_UASL_TRAP_FLAG 0X10 /* BIT 4 */ - -// 603221:tc.chen start -/* adslLineStatus Flags */ -#define LINE_STAT_MODEM_STATUS_FLAG 0x1 /* BIT 0th position */ -#define LINE_STAT_MODEM_STATUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data) -#define LINE_STAT_MODE_SEL_FLAG 0x2 /* BIT 1 */ -#define LINE_STAT_MODE_SEL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data) -#define LINE_STAT_TRELLCOD_ENABLE_FLAG 0x4 /* BIT 2 */ -#define LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, OPTN, 2, 0, 1, data) -#define LINE_STAT_LATENCY_FLAG 0x8 /* BIT 3 */ -#define LINE_STAT_LATENCY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 12, 0, 1, data) - -/* adslLineRate Flags */ -#define LINE_RATE_DATA_RATEDS_FLAG 0x1 /* BIT 0th position */ -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 2, 2, data) - - -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 0, 1, data) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 0, 1, data) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 0, 1, data) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 0, 1, data) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 0, 2, data) - -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 1, 1, data) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 1, 1, data) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 1, 1, data) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 1, 1, data) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 2, 2, data) - -#define LINE_RATE_DATA_RATEUS_FLAG 0x2 /* BIT 1 */ -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 2, 2, data) - - -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 0, 1, data) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 0, 1, data) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 0, 1, data) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 0, 1, data) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 0, 2, data) - -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 1, 1, data) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 1, 1, data) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 1, 1, data) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 1, 1, data) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 2, 2, data) - -#define LINE_RATE_ATTNDRDS_FLAG 0x4 /* BIT 2 */ -#define LINE_RATE_ATTNDRDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 2, data) - -#define LINE_RATE_ATTNDRUS_FLAG 0x8 /* BIT 3 */ -#define LINE_RATE_ATTNDRUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 4, 2, data) - -/* adslLineInformation Flags */ -#define LINE_INFO_INTLV_DEPTHDS_FLAG 0x1 /* BIT 0th position */ -#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 0, 1, data) -#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 1, 1, data) -#define LINE_INFO_INTLV_DEPTHUS_FLAG 0x2 /* BIT 1 */ -#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 0, 1, data) -#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 1, 1, data) -#define LINE_INFO_LATNDS_FLAG 0x4 /* BIT 2 */ -#define LINE_INFO_LATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 1, 1, data) -#define LINE_INFO_LATNUS_FLAG 0x8 /* BIT 3 */ -#define LINE_INFO_LATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 1, 1, data) -#define LINE_INFO_SATNDS_FLAG 0x10 /* BIT 4 */ -#define LINE_INFO_SATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data) -#define LINE_INFO_SATNUS_FLAG 0x20 /* BIT 5 */ -#define LINE_INFO_SATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 2, 1, data) -#define LINE_INFO_SNRMNDS_FLAG 0x40 /* BIT 6 */ -#define LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 3, 1, data) -#define LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 0, 1, data) -#define LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 46, 0, 1, data) -#define LINE_INFO_SNRMNUS_FLAG 0x80 /* BIT 7 */ -#define LINE_INFO_SNRMNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 3, 1, data) -#define LINE_INFO_ACATPDS_FLAG 0x100 /* BIT 8 */ -#define LINE_INFO_ACATPDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 6, 1, data) -#define LINE_INFO_ACATPUS_FLAG 0x200 /* BIT 9 */ -#define LINE_INFO_ACATPUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 6, 1, data) - -/* adslNearEndPerformanceStats Flags */ -#define NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data) -#define NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data) -#define NEAREND_PERF_SUPERFRAME_FLAG 0x1 /* BIT 0th position */ -#define NEAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data) -#define NEAREND_PERF_LOS_FLAG 0x2 /* BIT 1 */ -#define NEAREND_PERF_LOF_FLAG 0x4 /* BIT 2 */ -#define NEAREND_PERF_LPR_FLAG 0x8 /* BIT 3 */ -#define NEAREND_PERF_NCD_FLAG 0x10 /* BIT 4 */ -#define NEAREND_PERF_LCD_FLAG 0x20 /* BIT 5 */ -#define NEAREND_PERF_CRC_FLAG 0x40 /* BIT 6 */ -#define NEAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data) -#define NEAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data) -#define NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data) -#define NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data) -#define NEAREND_PERF_RSCORR_FLAG 0x80 /* BIT 7 */ -#define NEAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 6, 0, 1, data) -#define NEAREND_PERF_FECS_FLAG 0x100 /* BIT 8 */ -#define NEAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data) -#define NEAREND_PERF_ES_FLAG 0x200 /* BIT 9 */ -#define NEAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data) -#define NEAREND_PERF_SES_FLAG 0x400 /* BIT 10 */ -#define NEAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 9, 0, 1, data) -#define NEAREND_PERF_LOSS_FLAG 0x800 /* BIT 11 */ -#define NEAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data) -#define NEAREND_PERF_UAS_FLAG 0x1000 /* BIT 12 */ -#define NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 0, 2, data) -#define NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 2, 2, data) -#define NEAREND_PERF_HECERR_FLAG 0x2000 /* BIT 13 */ - -/* adslFarEndPerformanceStats Flags */ -#define FAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data) -#define FAREND_PERF_LOS_FLAG 0x1 /* BIT 0th position */ -#define FAREND_PERF_LOF_FLAG 0x2 /* BIT 1 */ -#define FAREND_PERF_LPR_FLAG 0x4 /* BIT 2 */ -#define FAREND_PERF_NCD_FLAG 0x8 /* BIT 3 */ -#define FAREND_PERF_LCD_FLAG 0x10 /* BIT 4 */ -#define FAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 0, 1, data) -#define FAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 1, 1, data) -#define FAREND_PERF_CRC_FLAG 0x20 /* BIT 5 */ -#define FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 0, 1, data) -#define FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 1, 1, data) -#define FAREND_PERF_RSCORR_FLAG 0x40 /* BIT 6 */ -#define FAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 32, 0, 1, data) -#define FAREND_PERF_FECS_FLAG 0x80 /* BIT 7 */ -#define FAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data) -#define FAREND_PERF_ES_FLAG 0x100 /* BIT 8 */ -#define FAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data) -#define FAREND_PERF_SES_FLAG 0x200 /* BIT 9 */ -#define FAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 35, 0, 1, data) -#define FAREND_PERF_LOSS_FLAG 0x400 /* BIT 10 */ -#define FAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data) -#define FAREND_PERF_UAS_FLAG 0x800 /* BIT 11 */ -#define FAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 0, 2, data) -#define FAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 2, 2, data) -#define FAREND_PERF_HECERR_FLAG 0x1000 /* BIT 12 */ -// 603221:tc.chen end -/* TR-69 related additional parameters - defines */ -/* Defines for struct adslATURSubcarrierInfo */ -#define NEAREND_HLINSC 0x1 -#define NEAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 71, 2, 1, data) -#define NEAREND_HLINPS 0x2 -#define NEAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 73, idx, size, data) -#define NEAREND_HLOGMT 0x4 -#define NEAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 0, 1, data) -#define NEAREND_HLOGPS 0x8 -#define NEAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 75, idx, size, data) -#define NEAREND_QLNMT 0x10 -#define NEAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 1, 1, data) -#define NEAREND_QLNPS 0x20 -#define NEAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 77, idx, size, data) -#define NEAREND_SNRMT 0x40 -#define NEAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 2, 1, data) -#define NEAREND_SNRPS 0x80 -#define NEAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 78, idx, size, data) -#define NEAREND_BITPS 0x100 -#define NEAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 22, idx, size, data) -#define NEAREND_GAINPS 0x200 -#define NEAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 24, idx, size, data) - -/* Defines for struct adslATUCSubcarrierInfo */ -#define FAREND_HLINSC 0x1 -#define FAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 70, 0, 1, data) -#define FAREND_HLINPS 0x2 -#define FAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 72, idx, size, data) -#define FAREND_HLOGMT 0x4 -#define FAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 0, 1, data) -#define FAREND_HLOGPS 0x8 -#define FAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 74, idx, size, data) -#define FAREND_QLNMT 0x10 -#define FAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 1, 1, data) -#define FAREND_QLNPS 0x20 -#define FAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 76, idx, size, data) -#define FAREND_SNRMT 0x40 -#define FAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 2, 1, data) -#define FAREND_SNRPS 0x80 -#define FAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 10, idx, size, data) -#define FAREND_BITPS 0x100 -#define FAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 23, idx, size, data) -#define FAREND_GAINPS 0x200 -#define FAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 25, idx, size, data) - - -// GET_ADSL_POWER_SPECTRAL_DENSITY -#define NOMPSD_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 0, 1, data) -#define NOMPSD_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 1, 1, data) -#define PCB_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 6, 1, data) -#define PCB_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 7, 1, data) -#define RMSGI_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 10, 1, data) -#define RMSGI_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 11, 1, data) - - -#endif -/////////////////////////////////////////////////Macro Definitions ? FLAG Setting & Testing - -#define SET_FLAG(flags, flag_val) ((*flags) = ((*flags) | flag_val)) -// -- This macro sets the flags with the flag_val. Here flags is passed as a pointer - -#define IS_FLAG_SET(flags, test_flag) (((*flags) & (test_flag)) == (test_flag)? test_flag:0) -// -- This macro verifies whether test_flag has been set in flags. Here flags is passed as a pointer - - -#define CLR_FLAG(flags, flag_bit) ((*flags) = (*flags) & (~flag_bit)) -// -- This macro resets the specified flag_bit in the flags. Here flags is passed as a pointer - - -////////////////////////////////////////////////DATA STRUCTURES ORGANIZATION - -//Here are the data structures used for accessing mib parameters. The ioctl call includes the third parameter as a void pointer. This parameter has to be type-casted in the driver code to the corresponding structure depending upon the command type. For Ex: consider the ioctl used to get the adslLineCode type, ioctl(fd,GET_ADSL_LINE_CODE,void *struct_adslLineTableEntry). In the driver code we check on the type of the command, i.e GET_ADSL_LINE_CODE and type-cast the void pointer to struct adslLineTableEntry type. - // -#define u32 unsigned int -#define u16 unsigned short -#define s16 short -#define u8 unsigned char - - -typedef u32 AdslPerfTimeElapsed; -typedef u32 AdslPerfPrevDayCount; -typedef u32 PerfCurrentCount; -typedef u32 PerfIntervalCount; -typedef u32 AdslPerfCurrDayCount; - - -//ioctl(int fd, GET_ADSL_LINE_CODE, void *struct_adslLineTableEntry) - -typedef struct adslLineTableEntry { - int ifIndex; - int adslLineCode; - u8 flags; -} adslLineTableEntry; - -#ifdef AMAZON_MEI_MIB_RFC3440 -typedef struct adslLineExtTableEntry { - int ifIndex; - u16 adslLineTransAtucCap; - u16 adslLineTransAtucConfig; - u16 adslLineTransAtucActual; - int adslLineGlitePowerState; - u32 flags; -}adslLineExtTableEntry; -#endif -//ioctl(int fd, GET_ADSL_ATUC_PHY, void *struct_adslAtucPhysEntry) - -typedef struct adslVendorId { - u16 country_code; - u_char provider_id[4]; /* Ascii characters */ - u_char revision_info[2]; -}adslVendorId; - - -typedef struct adslAtucPhysEntry { - int ifIndex; - char serial_no[32]; - union { - char vendor_id[16]; - adslVendorId vendor_info; - } vendor_id; - - char version_no[16]; - u32 status; - int outputPwr; - u32 attainableRate; - u8 flags; -} adslAtucPhysEntry; - - -//ioctl(int fd, GET_ADSL_ATUR_PHY, void *struct_adslAturPhysEntry) - -typedef struct adslAturPhysEntry { - int ifIndex; - char serial_no[32]; - union { - char vendor_id[16]; - adslVendorId vendor_info; - } vendor_id; - char version_no[16]; - int SnrMgn; - u32 Attn; - u32 status; - int outputPwr; - u32 attainableRate; - u8 flags; -} adslAturPhysEntry; - - -//ioctl(int fd, GET_ADSL_ATUC_CHAN_INFO, void *struct_adslAtucChanInfo) - -typedef struct adslAtucChanInfo { - int ifIndex; - u32 interleaveDelay; - u32 currTxRate; - u32 prevTxRate; - u8 flags; -} adslAtucChanInfo; - - -//ioctl(int fd, GET_ADSL_ATUR_CHAN_INFO, void *struct_adslAturChanInfo) - -typedef struct adslAturChanInfo { - int ifIndex; - u32 interleaveDelay; - u32 currTxRate; - u32 prevTxRate; - u32 crcBlkLen; - u8 flags; -} adslAturChanInfo; - - -//ioctl(int fd, GET_ADSL_ATUC_PERF_DATA, void *struct_atucPerfDataEntry) - -typedef struct atucPerfDataEntry -{ - int ifIndex; - u32 adslAtucPerfLofs; - u32 adslAtucPerfLoss; - u32 adslAtucPerfESs; - u32 adslAtucPerfInits; - int adslAtucPerfValidIntervals; - int adslAtucPerfInvalidIntervals; - AdslPerfTimeElapsed adslAtucPerfCurr15MinTimeElapsed; - PerfCurrentCount adslAtucPerfCurr15MinLofs; - PerfCurrentCount adslAtucPerfCurr15MinLoss; - PerfCurrentCount adslAtucPerfCurr15MinESs; - PerfCurrentCount adslAtucPerfCurr15MinInits; - AdslPerfTimeElapsed adslAtucPerfCurr1DayTimeElapsed; - AdslPerfCurrDayCount adslAtucPerfCurr1DayLofs; - AdslPerfCurrDayCount adslAtucPerfCurr1DayLoss; - AdslPerfCurrDayCount adslAtucPerfCurr1DayESs; - AdslPerfCurrDayCount adslAtucPerfCurr1DayInits; - int adslAtucPerfPrev1DayMoniSecs; - AdslPerfPrevDayCount adslAtucPerfPrev1DayLofs; - AdslPerfPrevDayCount adslAtucPerfPrev1DayLoss; - AdslPerfPrevDayCount adslAtucPerfPrev1DayESs; - AdslPerfPrevDayCount adslAtucPerfPrev1DayInits; - u32 flags; -} atucPerfDataEntry; - -#ifdef AMAZON_MEI_MIB_RFC3440 -typedef struct atucPerfDataExtEntry - { - int ifIndex; - u32 adslAtucPerfStatFastR; - u32 adslAtucPerfStatFailedFastR; - u32 adslAtucPerfStatSesL; - u32 adslAtucPerfStatUasL; - u32 adslAtucPerfCurr15MinFastR; - u32 adslAtucPerfCurr15MinFailedFastR; - u32 adslAtucPerfCurr15MinSesL; - u32 adslAtucPerfCurr15MinUasL; - u32 adslAtucPerfCurr1DayFastR; - u32 adslAtucPerfCurr1DayFailedFastR; - u32 adslAtucPerfCurr1DaySesL; - u32 adslAtucPerfCurr1DayUasL; - u32 adslAtucPerfPrev1DayFastR; - u32 adslAtucPerfPrev1DayFailedFastR; - u32 adslAtucPerfPrev1DaySesL; - u32 adslAtucPerfPrev1DayUasL; - u32 flags; -} atucPerfDataExtEntry; - -#endif -//ioctl(int fd, GET_ADSL_ATUR_PERF_DATA, void *struct_aturPerfDataEntry) - -typedef struct aturPerfDataEntry -{ - int ifIndex; - u32 adslAturPerfLofs; - u32 adslAturPerfLoss; - u32 adslAturPerfLprs; - u32 adslAturPerfESs; - int adslAturPerfValidIntervals; - int adslAturPerfInvalidIntervals; - AdslPerfTimeElapsed adslAturPerfCurr15MinTimeElapsed; - PerfCurrentCount adslAturPerfCurr15MinLofs; - PerfCurrentCount adslAturPerfCurr15MinLoss; - PerfCurrentCount adslAturPerfCurr15MinLprs; - PerfCurrentCount adslAturPerfCurr15MinESs; - AdslPerfTimeElapsed adslAturPerfCurr1DayTimeElapsed; - AdslPerfCurrDayCount adslAturPerfCurr1DayLofs; - AdslPerfCurrDayCount adslAturPerfCurr1DayLoss; - AdslPerfCurrDayCount adslAturPerfCurr1DayLprs; - AdslPerfCurrDayCount adslAturPerfCurr1DayESs; - int adslAturPerfPrev1DayMoniSecs; - AdslPerfPrevDayCount adslAturPerfPrev1DayLofs; - AdslPerfPrevDayCount adslAturPerfPrev1DayLoss; - AdslPerfPrevDayCount adslAturPerfPrev1DayLprs; - AdslPerfPrevDayCount adslAturPerfPrev1DayESs; - u32 flags; -} aturPerfDataEntry; - -#ifdef AMAZON_MEI_MIB_RFC3440 -typedef struct aturPerfDataExtEntry - { - int ifIndex; - u32 adslAturPerfStatSesL; - u32 adslAturPerfStatUasL; - u32 adslAturPerfCurr15MinSesL; - u32 adslAturPerfCurr15MinUasL; - u32 adslAturPerfCurr1DaySesL; - u32 adslAturPerfCurr1DayUasL; - u32 adslAturPerfPrev1DaySesL; - u32 adslAturPerfPrev1DayUasL; - u32 flags; -} aturPerfDataExtEntry; -#endif -//ioctl(int fd, GET_ADSL_ATUC_INTVL_INFO, void *struct_adslAtucInvtInfo) - -typedef struct adslAtucIntvlInfo { - int ifIndex; - int IntervalNumber; - PerfIntervalCount intervalLOF; - PerfIntervalCount intervalLOS; - PerfIntervalCount intervalES; - PerfIntervalCount intervalInits; - int intervalValidData; - u8 flags; -} adslAtucIntvlInfo; - -#ifdef AMAZON_MEI_MIB_RFC3440 -typedef struct adslAtucInvtlExtInfo - { - int ifIndex; - int IntervalNumber; - u32 adslAtucIntervalFastR; - u32 adslAtucIntervalFailedFastR; - u32 adslAtucIntervalSesL; - u32 adslAtucIntervalUasL; - u32 flags; -} adslAtucInvtlExtInfo; -#endif -//ioctl(int fd, GET_ADSL_ATUR_INTVL_INFO, void *struct_adslAturInvtlInfo) - -typedef struct adslAturIntvlInfo { - int ifIndex; - int IntervalNumber; - PerfIntervalCount intervalLOF; - PerfIntervalCount intervalLOS; - PerfIntervalCount intervalLPR; - PerfIntervalCount intervalES; - int intervalValidData; - u8 flags; -} adslAturIntvlInfo; - -#ifdef AMAZON_MEI_MIB_RFC3440 -typedef struct adslAturInvtlExtInfo - { - int ifIndex; - int IntervalNumber; - u32 adslAturIntervalSesL; - u32 adslAturIntervalUasL; - u32 flags; -} adslAturInvtlExtInfo; -#endif -//ioctl(int fd, GET_ADSL_ATUC_CHAN_PERF_DATA, void *struct_atucChannelPerfDataEntry) - -typedef struct atucChannelPerfDataEntry -{ - int ifIndex; - u32 adslAtucChanReceivedBlks; - u32 adslAtucChanTransmittedBlks; - u32 adslAtucChanCorrectedBlks; - u32 adslAtucChanUncorrectBlks; - int adslAtucChanPerfValidIntervals; - int adslAtucChanPerfInvalidIntervals; - AdslPerfTimeElapsed adslAtucChanPerfCurr15MinTimeElapsed; - PerfCurrentCount adslAtucChanPerfCurr15MinReceivedBlks; - PerfCurrentCount adslAtucChanPerfCurr15MinTransmittedBlks; - PerfCurrentCount adslAtucChanPerfCurr15MinCorrectedBlks; - PerfCurrentCount adslAtucChanPerfCurr15MinUncorrectBlks; - AdslPerfTimeElapsed adslAtucChanPerfCurr1DayTimeElapsed; - AdslPerfCurrDayCount adslAtucChanPerfCurr1DayReceivedBlks; - AdslPerfCurrDayCount adslAtucChanPerfCurr1DayTransmittedBlks; - AdslPerfCurrDayCount adslAtucChanPerfCurr1DayCorrectedBlks; - AdslPerfCurrDayCount adslAtucChanPerfCurr1DayUncorrectBlks; - int adslAtucChanPerfPrev1DayMoniSecs; - AdslPerfPrevDayCount adslAtucChanPerfPrev1DayReceivedBlks; - AdslPerfPrevDayCount adslAtucChanPerfPrev1DayTransmittedBlks; - AdslPerfPrevDayCount adslAtucChanPerfPrev1DayCorrectedBlks; - AdslPerfPrevDayCount adslAtucChanPerfPrev1DayUncorrectBlks; - u32 flags; -}atucChannelPerfDataEntry; - - -//ioctl(int fd, GET_ADSL_ATUR_CHAN_PERF_DATA, void *struct_aturChannelPerfDataEntry) - -typedef struct aturChannelPerfDataEntry -{ - int ifIndex; - u32 adslAturChanReceivedBlks; - u32 adslAturChanTransmittedBlks; - u32 adslAturChanCorrectedBlks; - u32 adslAturChanUncorrectBlks; - int adslAturChanPerfValidIntervals; - int adslAturChanPerfInvalidIntervals; - AdslPerfTimeElapsed adslAturChanPerfCurr15MinTimeElapsed; - PerfCurrentCount adslAturChanPerfCurr15MinReceivedBlks; - PerfCurrentCount adslAturChanPerfCurr15MinTransmittedBlks; - PerfCurrentCount adslAturChanPerfCurr15MinCorrectedBlks; - PerfCurrentCount adslAturChanPerfCurr15MinUncorrectBlks; - AdslPerfTimeElapsed adslAturChanPerfCurr1DayTimeElapsed; - AdslPerfCurrDayCount adslAturChanPerfCurr1DayReceivedBlks; - AdslPerfCurrDayCount adslAturChanPerfCurr1DayTransmittedBlks; - AdslPerfCurrDayCount adslAturChanPerfCurr1DayCorrectedBlks; - AdslPerfCurrDayCount adslAturChanPerfCurr1DayUncorrectBlks; - int adslAturChanPerfPrev1DayMoniSecs; - AdslPerfPrevDayCount adslAturChanPerfPrev1DayReceivedBlks; - AdslPerfPrevDayCount adslAturChanPerfPrev1DayTransmittedBlks; - AdslPerfPrevDayCount adslAturChanPerfPrev1DayCorrectedBlks; - AdslPerfPrevDayCount adslAturChanPerfPrev1DayUncorrectBlks; - u32 flags; -} aturChannelPerfDataEntry; - - -//ioctl(int fd, GET_ADSL_ATUC_CHAN_INTVL_INFO, void *struct_adslAtucChanIntvlInfo) - -typedef struct adslAtucChanIntvlInfo { - int ifIndex; - int IntervalNumber; - PerfIntervalCount chanIntervalRecvdBlks; - PerfIntervalCount chanIntervalXmitBlks; - PerfIntervalCount chanIntervalCorrectedBlks; - PerfIntervalCount chanIntervalUncorrectBlks; - int intervalValidData; - u8 flags; -} adslAtucChanIntvlInfo; - - -//ioctl(int fd, GET_ADSL_ATUR_CHAN_INTVL_INFO, void *struct_adslAturChanIntvlInfo) - -typedef struct adslAturChanIntvlInfo { - int ifIndex; - int IntervalNumber; - PerfIntervalCount chanIntervalRecvdBlks; - PerfIntervalCount chanIntervalXmitBlks; - PerfIntervalCount chanIntervalCorrectedBlks; - PerfIntervalCount chanIntervalUncorrectBlks; - int intervalValidData; - u8 flags; -} adslAturChanIntvlInfo; - - -//ioctl(int fd, GET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry) -//ioctl(int fd, SET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry) - -typedef struct adslLineAlarmConfProfileEntry - { - unsigned char adslLineAlarmConfProfileName[32]; - int adslAtucThresh15MinLofs; - int adslAtucThresh15MinLoss; - int adslAtucThresh15MinESs; - u32 adslAtucThreshFastRateUp; - u32 adslAtucThreshInterleaveRateUp; - u32 adslAtucThreshFastRateDown; - u32 adslAtucThreshInterleaveRateDown; - int adslAtucInitFailureTrapEnable; - int adslAturThresh15MinLofs; - int adslAturThresh15MinLoss; - int adslAturThresh15MinLprs; - int adslAturThresh15MinESs; - u32 adslAturThreshFastRateUp; - u32 adslAturThreshInterleaveRateUp; - u32 adslAturThreshFastRateDown; - u32 adslAturThreshInterleaveRateDown; - int adslLineAlarmConfProfileRowStatus; - u32 flags; -} adslLineAlarmConfProfileEntry; - -#ifdef AMAZON_MEI_MIB_RFC3440 -typedef struct adslLineAlarmConfProfileExtEntry - { - u8 adslLineAlarmConfProfileExtName[32]; - u32 adslAtucThreshold15MinFailedFastR; - u32 adslAtucThreshold15MinSesL; - u32 adslAtucThreshold15MinUasL; - u32 adslAturThreshold15MinSesL; - u32 adslAturThreshold15MinUasL; - u32 flags; -} adslLineAlarmConfProfileExtEntry; -#endif -//TRAPS - -// 603221:tc.chen start -/* The following Data Sturctures are added to support the WEB related parameters for ADSL Statistics */ -typedef struct adslLineStatus - { - int adslModemStatus; - u32 adslModeSelected; - int adslAtucThresh15MinESs; - int adslTrellisCodeEnable; - int adslLatency; - u8 flags; - } adslLineStatusInfo; - -typedef struct adslLineRate - { - u32 adslDataRateds; - u32 adslDataRateus; - u32 adslATTNDRds; - u32 adslATTNDRus; - u8 flags; - } adslLineRateInfo; - -typedef struct adslLineInfo - { - u32 adslInterleaveDepthds; - u32 adslInterleaveDepthus; - u32 adslLATNds; - u32 adslLATNus; - u32 adslSATNds; - u32 adslSATNus; - int adslSNRMds; - int adslSNRMus; - int adslACATPds; - int adslACATPus; - u32 flags; - } adslLineInfo; - -typedef struct adslNearEndPerfStats - { - u32 adslSuperFrames; - u32 adslneLOS; - u32 adslneLOF; - u32 adslneLPR; - u32 adslneNCD; - u32 adslneLCD; - u32 adslneCRC; - u32 adslneRSCorr; - u32 adslneFECS; - u32 adslneES; - u32 adslneSES; - u32 adslneLOSS; - u32 adslneUAS; - u32 adslneHECErrors; - u32 flags; - } adslNearEndPerfStats; - -typedef struct adslFarEndPerfStats - { - u32 adslfeLOS; - u32 adslfeLOF; - u32 adslfeLPR; - u32 adslfeNCD; - u32 adslfeLCD; - u32 adslfeCRC; - u32 adslfeRSCorr; - u32 adslfeFECS; - u32 adslfeES; - u32 adslfeSES; - u32 adslfeLOSS; - u32 adslfeUAS; - u32 adslfeHECErrors; - u32 flags; - } adslFarEndPerfStats; -// 603221:tc.chen end - -/* The number of tones (and hence indexes) is dependent on the ADSL mode - G.992.1, G.992.2, G.992.3, * G.992.4 and G.992.5 */ -typedef struct adslATURSubcarrierInfo { - int ifindex; - u16 HLINSCds; - u16 HLINpsds[1024];/* Even index = real part; Odd Index - = imaginary part for each tone */ - u16 HLOGMTds; - u16 HLOGpsds[512]; - u16 QLNMTds; - u16 QLNpsds[512]; - u16 SNRMTds; - u16 SNRpsds[512]; - u16 BITpsds[512]; - u16 GAINpsds[512]; - u16 flags; -}adslATURSubcarrierInfo; - -typedef struct adslATUCSubcarrierInfo { - int ifindex; - u16 HLINSCus; - u16 HLINpsus[128];/* Even index = real part; Odd Index - = imaginary part for each tone */ - u16 HLOGMTus; - u16 HLOGpsus[64]; - u16 QLNMTus; - u16 QLNpsus[64]; - u16 SNRMTus; - u16 SNRpsus[64]; - u16 BITpsus[64]; - u16 GAINpsus[64]; - u16 flags; -}adslATUCSubcarrierInfo; - -#ifndef u_int16 -#define u_int16 u16 -#endif - -typedef struct adslInitStats { - u_int16 FullInitializationCount; - u_int16 FailedFullInitializationCount; - u_int16 LINIT_Errors; - u_int16 Init_Timeouts; -}adslInitStats; - -typedef struct adslPowerSpectralDensity { - int ACTPSDds; - int ACTPSDus; -}adslPowerSpectralDensity; - - -//ioctl(int fd, ADSL_ATUR_TRAPS, void *uint16_flags) -typedef union structpts { - adslLineTableEntry * adslLineTableEntry_pt; - adslAtucPhysEntry * adslAtucPhysEntry_pt; - adslAturPhysEntry * adslAturPhysEntry_pt; - adslAtucChanInfo * adslAtucChanInfo_pt; - adslAturChanInfo * adslAturChanInfo_pt; - atucPerfDataEntry * atucPerfDataEntry_pt; - aturPerfDataEntry * aturPerfDataEntry_pt; - adslAtucIntvlInfo * adslAtucIntvlInfo_pt; - adslAturIntvlInfo * adslAturIntvlInfo_pt; - atucChannelPerfDataEntry * atucChannelPerfDataEntry_pt; - aturChannelPerfDataEntry * aturChannelPerfDataEntry_pt; - adslAtucChanIntvlInfo * adslAtucChanIntvlInfo_pt; - adslAturChanIntvlInfo * adslAturChanIntvlInfo_pt; - adslLineAlarmConfProfileEntry * adslLineAlarmConfProfileEntry_pt; - // RFC 3440 - - #ifdef AMAZON_MEI_MIB_RFC3440 - adslLineExtTableEntry * adslLineExtTableEntry_pt; - atucPerfDataExtEntry * atucPerfDataExtEntry_pt; - adslAtucInvtlExtInfo * adslAtucInvtlExtInfo_pt; - aturPerfDataExtEntry * aturPerfDataExtEntry_pt; - adslAturInvtlExtInfo * adslAturInvtlExtInfo_pt; - adslLineAlarmConfProfileExtEntry * adslLineAlarmConfProfileExtEntry_pt; - #endif -// 603221:tc.chen start - adslLineStatusInfo * adslLineStatusInfo_pt; - adslLineRateInfo * adslLineRateInfo_pt; - adslLineInfo * adslLineInfo_pt; - adslNearEndPerfStats * adslNearEndPerfStats_pt; - adslFarEndPerfStats * adslFarEndPerfStats_pt; -// 603221:tc.chen end - adslATUCSubcarrierInfo * adslATUCSubcarrierInfo_pt; - adslATURSubcarrierInfo * adslATURSubcarrierInfo_pt; - adslPowerSpectralDensity * adslPowerSpectralDensity_pt; -}structpts; - -#endif /* ] __AMAZON_MEI_APP_IOCTL_H */ diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_ioctl.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_ioctl.h deleted file mode 100644 index 02a150eac4..0000000000 --- a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_ioctl.h +++ /dev/null @@ -1,757 +0,0 @@ -//509221:tc.chen 2005/09/22 Reset DFE added when MEI_TO_ARC_CS_DONE not cleared by ARC and Added AMAZON_MEI_DEBUG_MODE ioctl -#ifndef _AMAZON_MEI_IOCTL_H -#define _AMAZON_MEI_IOCTL_H - -///////////////////////////////////////////////////////////////////////////////////////////////////// -#define PCM_BUFF_SIZE 1024 //bytes -// interrupt numbers - -#ifndef _AMAZON_ADSL_APP - -typedef struct pcm_data_struct{ - u16 S; - u16 temp; - u16 LSW; - u16 MSW; - u16 len; - u16 rdindex; - u16 wrindex; - u16 flow; - - int finish; - u8 buff[PCM_BUFF_SIZE]; - int point; -}pcm_data_struct; - -typedef struct amazon_clreoc_pkt{ - struct list_head list; - u8 * command; //point to clreoc command data - int len; //command length -}amazon_clreoc_pkt; - -// Number of intervals -#define INTERVAL_NUM 192 //two days -typedef struct amazon_mei_mib{ - struct list_head list; - struct timeval start_time; //start of current interval - - int AtucPerfLof; - int AtucPerfLos; - int AtucPerfEs; - int AtucPerfInit; - - int AturPerfLof; - int AturPerfLos; - int AturPerfLpr; - int AturPerfEs; - - int AturChanPerfRxBlk; - int AturChanPerfTxBlk; - int AturChanPerfCorrBlk; - int AturChanPerfUncorrBlk; - - //RFC-3440 - int AtucPerfStatFastR; - int AtucPerfStatFailedFastR; - int AtucPerfStatSesL; - int AtucPerfStatUasL; - int AturPerfStatSesL; - int AturPerfStatUasL; -}amazon_mei_mib; - -typedef struct adslChanPrevTxRate{ - u32 adslAtucChanPrevTxRate; - u32 adslAturChanPrevTxRate; -}adslChanPrevTxRate; - -typedef struct adslPhysCurrStatus{ - u32 adslAtucCurrStatus; - u32 adslAturCurrStatus; -}adslPhysCurrStatus; - -typedef struct ChanType{ - int interleave; - int fast; -// 603221:tc.chen start - int bearchannel0; - int bearchannel1; -// 603221:tc.chen end -}ChanType; - -typedef struct mib_previous_read{ - u16 ATUC_PERF_ESS; - u16 ATUR_PERF_ESS; - u32 ATUR_CHAN_RECV_BLK; - u16 ATUR_CHAN_CORR_BLK_INTL; - u16 ATUR_CHAN_CORR_BLK_FAST; - u16 ATUR_CHAN_UNCORR_BLK_INTL; - u16 ATUR_CHAN_UNCORR_BLK_FAST; - u16 ATUC_PERF_STAT_FASTR; - u16 ATUC_PERF_STAT_FAILED_FASTR; - u16 ATUC_PERF_STAT_SESL; - u16 ATUC_PERF_STAT_UASL; - u16 ATUR_PERF_STAT_SESL; -}mib_previous_read; - -typedef struct mib_flags_pretime{ - struct timeval ATUC_PERF_LOSS_PTIME; - struct timeval ATUC_PERF_LOFS_PTIME; - struct timeval ATUR_PERF_LOSS_PTIME; - struct timeval ATUR_PERF_LOFS_PTIME; - struct timeval ATUR_PERF_LPR_PTIME; -}mib_flags_pretime; - - // cmv message structures -#define MP_PAYLOAD_SIZE 12 -typedef struct mpmessage{ - u16 iFunction; - u16 iGroup; - u16 iAddress; - u16 iIndex; - u16 iPayload[MP_PAYLOAD_SIZE]; -}MPMessage; -#endif - - -typedef struct meireg{ - u32 iAddress; - u32 iData; -}meireg; - -#define MEIDEBUG_BUFFER_SIZES 50 -typedef struct meidebug{ - u32 iAddress; - u32 iCount; - u32 buffer[MEIDEBUG_BUFFER_SIZES]; -}meidebug; - -//============================================================================== -// Group definitions -//============================================================================== -#define OPTN 5 -#define CNFG 8 -#define CNTL 1 -#define STAT 2 -#define RATE 6 -#define PLAM 7 -#define INFO 3 -#define TEST 4 -//============================================================================== -// Opcode definitions -//============================================================================== -#define H2D_CMV_READ 0x00 -#define H2D_CMV_WRITE 0x04 -#define H2D_CMV_INDICATE_REPLY 0x10 -#define H2D_ERROR_OPCODE_UNKNOWN 0x20 -#define H2D_ERROR_CMV_UNKNOWN 0x30 - -#define D2H_CMV_READ_REPLY 0x01 -#define D2H_CMV_WRITE_REPLY 0x05 -#define D2H_CMV_INDICATE 0x11 -#define D2H_ERROR_OPCODE_UNKNOWN 0x21 -#define D2H_ERROR_CMV_UNKNOWN 0x31 -#define D2H_ERROR_CMV_READ_NOT_AVAILABLE 0x41 -#define D2H_ERROR_CMV_WRITE_ONLY 0x51 -#define D2H_ERROR_CMV_READ_ONLY 0x61 - -#define H2D_DEBUG_READ_DM 0x02 -#define H2D_DEBUG_READ_PM 0x06 -#define H2D_DEBUG_WRITE_DM 0x0a -#define H2D_DEBUG_WRITE_PM 0x0e - -#define D2H_DEBUG_READ_DM_REPLY 0x03 -#define D2H_DEBUG_READ_FM_REPLY 0x07 -#define D2H_DEBUG_WRITE_DM_REPLY 0x0b -#define D2H_DEBUG_WRITE_FM_REPLY 0x0f -#define D2H_ERROR_ADDR_UNKNOWN 0x33 - -#define D2H_AUTONOMOUS_MODEM_READY_MSG 0xf1 -//============================================================================== -// INFO register address field definitions -//============================================================================== - -#define INFO_TxState 0 -#define INFO_RxState 1 -#define INFO_TxNextState 2 -#define INFO_RxNextState 3 -#define INFO_TxStateJumpFrom 4 -#define INFO_RxStateJumpFrom 5 - -#define INFO_ReverbSnrBuf 8 -#define INFO_ReverbEchoSnrBuf 9 -#define INFO_MedleySnrBuf 10 -#define INFO_RxShowtimeSnrBuf 11 -#define INFO_DECdelay 12 -#define INFO_DECExponent 13 -#define INFO_DECTaps 14 -#define INFO_AECdelay 15 -#define INFO_AECExponent 16 -#define INFO_AECTaps 17 -#define INFO_TDQExponent 18 -#define INFO_TDQTaps 19 -#define INFO_FDQExponent 20 -#define INFO_FDQTaps 21 -#define INFO_USBat 22 -#define INFO_DSBat 23 -#define INFO_USFineGains 24 -#define INFO_DSFineGains 25 -#define INFO_BitloadFirstChannel 26 -#define INFO_BitloadLastChannel 27 -#define INFO_PollEOCData 28 // CO specific -#define INFO_CSNRMargin 29 // CO specific -#define INFO_RCMsgs1 30 -#define INFO_RMsgs1 31 -#define INFO_RMsgRA 32 -#define INFO_RCMsgRA 33 -#define INFO_RMsg2 34 -#define INFO_RCMsg2 35 -#define INFO_BitLoadOK 36 -#define INFO_RCRates1 37 -#define INFO_RRates1Tab 38 -#define INFO_RMsgs1Tab 39 -#define INFO_RMsgRATab 40 -#define INFO_RRatesRA 41 -#define INFO_RCRatesRA 42 -#define INFO_RRates2 43 -#define INFO_RCRates2 44 -#define INFO_PackedRMsg2 45 -#define INFO_RxBitSwapFlag 46 -#define INFO_TxBitSwapFlag 47 -#define INFO_ShowtimeSNRUpdateCount 48 -#define INFO_ShowtimeFDQUpdateCount 49 -#define INFO_ShowtimeDECUpdateCount 50 -#define INFO_CopyRxBuffer 51 -#define INFO_RxToneBuf 52 -#define INFO_TxToneBuf 53 -#define INFO_Version 54 -#define INFO_TimeStamp 55 -#define INFO_feVendorID 56 -#define INFO_feSerialNum 57 -#define INFO_feVersionNum 58 -#define INFO_BulkMemory 59 //Points to start of bulk memory -#define INFO_neVendorID 60 -#define INFO_neVersionNum 61 -#define INFO_neSerialNum 62 - -//============================================================================== -// RATE register address field definitions -//============================================================================== - - -#define RATE_UsRate 0 -#define RATE_DsRate 1 - - -//============================================================================== -// PLAM (Physical Layer Management) register address field definitions -// (See G997.1 for reference) -//============================================================================== - - - // /// - // Failure Flags /// - // /// - -#define PLAM_NearEndFailureFlags 0 -#define PLAM_FarEndFailureFlags 1 - - // /// - // Near End Failure Flags Bit Definitions /// - // /// - -// ADSL Failures /// -#define PLAM_LOS_FailureBit 0x0001 -#define PLAM_LOF_FailureBit 0x0002 -#define PLAM_LPR_FailureBit 0x0004 -#define PLAM_RFI_FailureBit 0x0008 - -// ATM Failures /// -#define PLAM_NCD_LP0_FailureBit 0x0010 -#define PLAM_NCD_LP1_FailureBit 0x0020 -#define PLAM_LCD_LP0_FailureBit 0x0040 -#define PLAM_LCD_LP1_FailureBit 0x0080 - -#define PLAM_NCD_BC0_FailureBit 0x0100 -#define PLAM_NCD_BC1_FailureBit 0x0200 -#define PLAM_LCD_BC0_FailureBit 0x0400 -#define PLAM_LCD_BC1_FailureBit 0x0800 - // /// - // Performance Counts /// - // /// - -#define PLAM_NearEndCrcCnt 2 -#define PLAM_CorrectedRSErrors 3 - -#define PLAM_NearEndECSCnt 6 -#define PLAM_NearEndESCnt 7 -#define PLAM_NearEndSESCnt 8 -#define PLAM_NearEndLOSSCnt 9 -#define PLAM_NearEndUASLCnt 10 - -#define PLAM_NearEndHECErrCnt 11 - -#define PLAM_NearEndHECTotCnt 16 -#define PLAM_NearEndCellTotCnt 18 -#define PLAM_NearEndSfCntLSW 20 -#define PLAM_NearEndSfCntMSW 21 - -#define PLAM_FarEndFebeCnt 24 - -#define PLAM_FarEndFecCnt 28 - -#define PLAM_FarEndFECSCnt 32 -#define PLAM_FarEndESCnt 33 -#define PLAM_FarEndSESCnt 34 -#define PLAM_FarEndLOSSCnt 35 -#define PLAM_FarEndUASLCnt 36 - -#define PLAM_FarEndHECErrCnt 37 - -#define PLAM_FarEndHECTotCnt 41 - -#define PLAM_FarEndCellTotCnt 43 - -#define PLAM_LineAttn 45 -#define PLAM_SNRMargin 46 - - -//============================================================================== -// CNTL register address and bit field definitions -//============================================================================== - - -#define CNTL_ModemControl 0 - -#define CNTL_ModemReset 0x0 -#define CNTL_ModemStart 0x2 - - -//============================================================================== -// STAT register address and bit field definitions -//============================================================================== - -#define STAT_MacroState 0 -#define STAT_Mode 1 -#define STAT_DMTFramingMode 2 -#define STAT_SleepState 3 -#define STAT_Misc 4 -#define STAT_FailureState 5 - -//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - // STAT_OLRStatus provides status of OLR - //16-bit STAT_OLRStatus_DS - // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted - // [3:2]: Reserved - // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA) - // [7:6]: Reserved - // [10:8]: >0=Request. 0=not. For DS, # of request transmissions/retransmissions (3 bits). - // [11]: 1=Receive Response, 0=not - // [15:12]: Reserved - ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - /// -#define STAT_OLRStatus_DS 6 - -//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - // STAT_OLRStatus provides status of OLR - // 16-bit STAT_OLRStatus_US CMV - // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted - // [3:2]: Reserved - // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA) - // [7:6]: Reserved - // [8]: 1=Request Received. 0=not. - // [10:9]: Reserved - // [11]: 1=Response Sent, 0=not - // [15:12]: Reserved - ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -/// -#define STAT_OLRStatus_US 7 - -//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - // STAT_PMStatus provides status of PM - // 16-bit STAT_PMStatus CMV - // [1:0] : PM Status 00=IDLE, 01=PM_IN_PROGRESS, 10=PM_Completed, 11=PM_Aborted - // [2] : 0=ATU_R initiated PM; 1 = ATU_C initiated PM - // [3]: Reserved - // [5:4]: PM_Type (1:Simple Request; 2: L2 request; 3: L2 trim) - // [7:6]: Reserved - // [10:8]: >0=Request. 0=not. # of request transmissions/retransmissions (3 bits). - // [11]: 1=Response, 0=not - // [15:12]: Reserved - ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - /// -#define STAT_PMStatus 8 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - // 16-bit STAT_OLRError_DS, STAT_OLRError_US, STAT_PMError - // [3:0]: OLR/PM response reason code - // [7:4]: OLR/PM Internal error code - // [15:8]: OLR/PM Reserved for future - ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - /// -#define STAT_OLRError_DS 9 -#define STAT_OLRError_US 10 -#define STAT_PMError 11 - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_MacroState -// MacroState reflects the high level state of the modem - -#define STAT_InitState 0x0000 -#define STAT_ReadyState 0x0001 -#define STAT_FailState 0x0002 -#define STAT_IdleState 0x0003 -#define STAT_QuietState 0x0004 -#define STAT_GhsState 0x0005 -#define STAT_FullInitState 0x0006 -#define STAT_ShowTimeState 0x0007 -#define STAT_FastRetrainState 0x0008 -#define STAT_LoopDiagMode 0x0009 -#define STAT_ShortInit 0x000A // Bis short initialization /// - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_Mode -// ConfigurationMode indicates the mode of the current ADSL Link. In general, a modem may use -// G.Hs or some other mechanism to negotiate the specific mode of operation. -// The OPTN_modeControl CMV is used to select a set of desired modes. -// The STAT_Mode CMV indicates which mode was actually selected. - -#define STAT_ConfigMode_T1413 0x0001 -#define STAT_ConfigMode_G992_2_AB 0x0002 -#define STAT_ConfigMode_G992_1_A 0x0004 -#define STAT_ConfigMode_G992_1_B 0x0008 -#define STAT_ConfigMode_G992_1_C 0x0010 -#define STAT_ConfigMode_G992_2_C 0x0020 - -#define STAT_ConfigMode_G992_3_A 0x0100 -#define STAT_ConfigMode_G992_3_B 0x0200 -#define STAT_ConfigMode_G992_3_I 0x0400 -#define STAT_ConfigMode_G992_3_J 0x0800 -#define STAT_ConfigMode_G992_3_L 0x1000 - -#define STAT_ConfigMode_G992_4_A 0x2000 -#define STAT_ConfigMode_G992_4_I 0x4000 - -#define STAT_ConfigMode_G992_5 0x8000 - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_DMTFramingMode -// FramingMode indicates the DMT framing mde negotiated during initialization. The framing mode -// status is not applicable in BIS mode and its value is undefined -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define STAT_FramingModeMask 0x0003 - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_Misc -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define STAT_OverlappedSpectrum 0x0008 -#define STAT_TCM 0x0010 -#define STAT_TDQ_at_1104 0x0020 -#define STAT_T1413_Signal_Detected 0x0040 -#define STAT_AnnexL_US_Mask1_PSD 0x1000 //indicate we actually selected G992.3 AnnexL US PSD mask1 -#define STAT_AnnexL_US_Mask2_PSD 0x2000 //indicate we actually selected G992.3 AnnexL US PSD mask2 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_FailureState -// when the MacroSTate indicates the fail state, FailureState provides a failure code -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - - -#define E_CODE_NO_ERROR 0 -#define E_CODE_BAT_TX 1 // TX BAT table is incorrect */ -#define E_CODE_BAT_RX 2 // RX BAT table is incorrect */ -#define E_CODE_PROFILE 3 // profile is not selected in fast retrain */ -#define E_CODE_TX_AOC_FIFO_OVERFLOW 4 -#define E_CODE_TRUNCATE_FR 5 //Fast Retrain truncated due to no stored profiles*/ -#define E_CODE_BITLOAD 6 // bit loading fails */ -#define E_CODE_ST_ERROR 7 // showtime CRC error */ -#define E_CODE_RESERVED 8 // using parameters reserved by the ITU-T */ -#define E_CODE_C_TONES 9 // detected C_TONES */ -#define E_CODE_CODESWAP_ERR 10 // codeswap not finished in time */ -#define E_CODE_FIFO_OVERFLOW 11 // we have run out of fifo space */ -#define E_CODE_C_BG_DECODE_ERR 12 // error in decoding C-BG message */ -#define E_CODE_C_RATES2_DECODE_ERR 13 // error in decoding C-MSGS2 and C-RATES2 */ -#define E_CODE_RCMedleyRx_C_SEGUE2_Failure 14 // Timeout after RCMedleyRx waiting for C_SEGUE2 */ -#define E_CODE_RReverbRATx_C_SEGUE2_Failure 15 // Timeout after RReverbRATx waiting for C_SEGUE2 */ -#define E_CODE_RReverb3Tx_C_SEGUE1_Failure 16 // Timeout after RReverb3Tx waiting for C_SEGUE1 */ -#define E_CODE_RCCRC2Rx_C_RATES1_DECOD_ERR 17 // Received CRC not equal to computed CRC */ -#define E_CODE_RCCRC1Rx_C_RATES1_DECOD_ERR 18 // Received CRC not equal to computed CRC */ -#define E_CODE_RReverb5Tx_C_SEGUE2_Failure 19 // Timeout after RReverb5Tx waiting for C_SEGUE2 */ -#define E_CODE_RReverb6Tx_C_SEGUE3_Failure 20 // Timeout after RReverb6Tx waiting for C_SEGUE3 */ -#define E_CODE_RSegue5Tx_C_SEGUE3_Failure 21 // Timeout after RSegue5Tx waiting for C_SEGUE3 */ -#define E_CODE_RCReverb5Rx_C_SEGUE_Failure 22 // Timeout after RCReverb5Rx waiting for C_SEGUE */ -#define E_CODE_RCReverbRARx_C_SEGUE2_Failure 23 // Timeout after RCReverbRARx waiting for C_SEGUE2 */ -#define E_CODE_RCCRC4Rx_CMSGS2_DECOD_ERR 24 // Received CRC not equal to computed CRC */ -#define E_CODE_RCCRC5Rx_C_BG_DECOD_ERR 25 // Received CRC not equal to computed CRC */ -#define E_CODE_RCCRC3Rx_DECOD_ERR 26 // Received CRC not equal to computed CRC */ -#define E_CODE_RCPilot3_DEC_PATH_DEL_TIMEOUT 27 // DEC Path Delay timeout */ -#define E_CODE_RCPilot3_DEC_TRAINING_TIMEOUT 28 // DEC Training timeout */ -#define E_CODE_RCReverb3Rx_C_SEGUE1_Failure 29 // Timeout after RCReverb3Rx waiting for C_SEGUE1 */ -#define E_CODE_RCReverb2Rx_SignalEnd_Failure 30 // Timeout waiting for the end of RCReverb2Rx signal */ -#define E_CODE_RQuiet2_SignalEnd_Failure 31 // Timeout waiting for the end of RQuiet2 signal */ -#define E_CODE_RCReverbFR1Rx_Failure 32 // Timeout waiting for the end of RCReverbFR1Rx signal */ -#define E_CODE_RCPilotFR1Rx_SignalEnd_Failure 33 // Timeout waiting for the end of RCPilotFR1Rx signal */ -#define E_CODE_RCReverbFR2Rx_C_Segue_Failure 34 // Timeout after RCReverbFR2Rx waiting for C_SEGUE */ -#define E_CODE_RCReverbFR5Rx_SignalEnd_TIMEOUT 35 // Timeout waiting for the end of RCReverbFR5Rx signal */ -#define E_CODE_RCReverbFR6Rx_C_SEGUE_Failure 36 // Timeout after RCReverbFR6Rx waiting for C_SEGUE */ -#define E_CODE_RCReverbFR8Rx_C_SEGUE_FR4_Failure 37 // Timeout after RCReverbFR8Rx waiting for C_SEGUE_FR4 */ -#define E_CODE_RCReverbFR8Rx_No_PROFILE 38 // Timeout since no profile was selected */ -#define E_CODE_RCReverbFR8Rx_SignalEnd_TIMEOUT 39 // Timeout waiting for the end of RCReverbFR8Rx signal */ -#define E_CODE_RCCRCFR1_DECOD_ERR 40 // Received CRC not equal to computed CRC */ -#define E_CODE_RCRecovRx_SingnalEnd_TIMEOUT 41 // Timeout waiting for the end of RCRecovRx signal */ -#define E_CODE_RSegueFR5Tx_TX_Not_Ready_TIMEOUT 42 // Timeout after RSegueFR5Tx waiting for C_SEGUE2 */ -#define E_CODE_RRecovTx_SignalEnd_TIMEOUT 43 // Timeout waiting for the end of RRecovTx signal */ -#define E_CODE_RCMedleyFRRx_C_SEGUE2_Failure 44 // Timeout after RCMedleyFRRx waiting for C_SEGUE2 */ -#define E_CODE_CONFIGURATION_PARAMETERS_ERROR 45 // one of the configuration parameters do not meet the standard */ -#define E_CODE_BAD_MEM_ACCESS 46 -#define E_CODE_BAD_INSTRUCTION_ACCESS 47 -#define E_CODE_TX_EOC_FIFO_OVERFLOW 48 -#define E_CODE_RX_EOC_FIFO_OVERFLOW 49 -#define E_CODE_GHS_CD_FLAG_TIME_OUT 50 // Timeout when transmitting Flag in handshake cleardown */ - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -//STAT_OLRStatus: -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define STAT_OLRPM_IDLE 0x0000 -#define STAT_OLRPM_IN_PROGRESS 0x0001 -#define STAT_OLRPM_COMPLETE 0x0002 -#define STAT_OLRPM_ABORTED 0x0003 -#define STAT_OLRPM_RESPONSE 0x0800 - -#define STAT_OLR_BITSWAP 0x0010 -#define STAT_OLR_DRR 0x0020 -#define STAT_OLR_SRA 0x0030 - -//STAT_PMStatus_US: -#define STAT_PM_CO_REQ 0x0004 -#define STAT_PM_SIMPLE_REQ 0x0010 -#define STAT_PM_L2_REQ 0x0020 -#define STAT_PM_L2_TRIM_REQ 0x0030 - -// STAT_OLRError_DS, STAT_OLRError_US -//4 bit response reason code: -#define RESP_BUSY 0x01 -#define RESP_INVALID_PARAMETERS 0x02 -#define RESP_NOT_ENABLED 0x03 -#define RESP_NOT_SUPPORTED 0x04 - -//4 bit internal error code (common for OLR and PM) -#define REQ_INVALID_BiGi 0x10 -#define REQ_INVALID_Lp 0x20 -#define REQ_INVALID_Bpn 0x30 -#define REQ_INVALID_FRAMING_CONSTRAINT 0x40 -#define REQ_NOT_IN_L0_STATE 0x50 -#define REQ_NOT_IN_L2_STATE 0x60 -#define REQ_INVALID_PCB 0x70 -#define REQ_VIOLATES_MARGIN 0x80 - -//STAT_PMError -//4 bit response reason code: -#define RESP_STATE_NOT_DESIRED 0x03 -#define RESP_INFEASIBLE_PARAMETERS 0x04 - - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN register address and bit field definitions -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define OPTN_ModeControl 0 -#define OPTN_DMTLnkCtl 1 -// Reserved 2 -#define OPTN_GhsControl 3 -// Reserved 4 -#define OPTN_PwrManControl 5 -#define OPTN_AnnexControl 6 -#define OPTN_ModeControl1 7 -// Reserved 8 -#define OPTN_StateMachineCtrl 9 -// Reserved 10 -// Reserved 11 -#define OPTN_BisLinkControl 12 -#define OPTN_ATMAddrConfig 13 -#define OPTN_ATMNumCellConfig 14 - -// Mode control defines the allowable operating modes of an ADSL link. In general, a modem may /// -// use G.Hs or some other mechanism to negotiate the specific mode of operation. /// -// The OPTN_ModeControl CMV is used to select a set of desired modes /// -// The STAT_ModeControl CMV indicates which mode was actually selected /// - -// OPTN_ModeControl -#define OPTN_ConfigMode_T1413 0x0001 -#define OPTN_ConfigMode_G992_2_AB 0x0002 -#define OPTN_ConfigMode_G992_1_A 0x0004 -#define OPTN_ConfigMode_G992_1_B 0x0008 -#define OPTN_ConfigMode_G992_1_C 0x0010 -#define OPTN_ConfigMode_G992_2_C 0x0020 - -#define OPTN_ConfigMode_G992_3_A 0x0100 -#define OPTN_ConfigMode_G992_3_B 0x0200 -#define OPTN_ConfigMode_G992_3_I 0x0400 -#define OPTN_ConfigMode_G992_3_J 0x0800 -#define OPTN_ConfigMode_G992_3_L 0x1000 - -#define OPTN_ConfigMode_G992_4_A 0x2000 -#define OPTN_ConfigMode_G992_4_I 0x4000 - -#define OPTN_ConfigMode_G992_5 0x8000 - -// OPTN_PwrManControl -#define OPTN_PwrManWakeUpGhs 0x1 -#define OPTN_PwrManWakeUpFR 0x2 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN_DMT Link Control -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -#define OPTN_DMT_DualLatency_Dis 0x200 -#define OPTN_DMT_S_Dis 0x100 -#define OPTN_DMT_FRAMINGMODE 0x1 -#define OPTN_DMT_FRAMINGMODE_MASK 0x7 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN_BIS Link Control -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -#define OPTN_BisLinkContrl_LineProbeDis 0x1 -#define OPTN_BisLinkContrl_DSBlackBitsEn 0x2 -#define OPTN_BisLinkContrl_DiagnosticModeEn 0x4 -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN_GhsControl -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// -// for OPTN_GhsControl, we will assign 16bit word as follows -// bit 0~3: set the control over which start(initial) message CPE will send: -// -// BIT: 2 1 0 -// 0 0 1 CLR -// 0 1 0 MR -// 0 1 1 MS -// 1 0 0 MP -// -// // bit 4~6: set the control over which message will be sent when we get at lease one CL/CLR exchange -// BIT: 5 4 -// 0 1 MS -// 1 0 MR -// 1 1 MP -// -// // bit 15: RT initiated G.hs sample sessions one through eight. Session one is default. -// BIT: 15 -// 1 means session one -// -/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define OPTN_GHS_ST_GHS 0x8000 -#define OPTN_GHS_INIT_MASK 0x000F -#define OPTN_GHS_RESP_MASK 0x00F0 - -#define OPTN_RTInitTxMsg_CLR 0x0001 -#define OPTN_RTInitTxMsg_MR 0x0002 -#define OPTN_RTInitTxMsg_MS 0x0003 -#define OPTN_RTInitTxMsg_MP 0x0004 - -#define OPTN_RTRespTxMsg_MS 0x0010 -#define OPTN_RTRespTxMsg_MR 0x0020 -#define OPTN_RTRespTxMsg_MP 0x0030 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN_AnnexControl -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - - -// G.992.3 Annex A/L1/L2 US PSD Mask preferred - -#define OPTN_G992_3_AnnexA_PreferredModeMask 0x3000 -#define OPTN_G992_3_AnnexA_PreferredModeA 0x0000 // default AnnexA PSD mask /// -#define OPTN_G992_3_AnnexA_PreferredModeL1 0x1000 // AnnexL wide spectrum upstream PSD mask /// -#define OPTN_G992_3_AnnexA_PreferredModeL2 0x2000 // AnnexL narrow spectrum upstream PSD mask /// - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -//OPTN_ATMAddrConfig -// Bits 4:0 are Utopia address for BC1 -// Bits 9:5 are Utopia address for BC0 -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define OPTN_UTPADDR_BC1 0x001F -#define OPTN_UTPADDR_BC0 0x03E0 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -//OPTN_ATMNumCellConfig -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define OPTN_BC1_NUM_CELL_PAGES 0x000F // Bits 0:3 /// -#define OPTN_BC0_NUM_CELL_PAGES 0x00F0 // Bits 4:7 /// - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// CNFG register address field /// -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -/////////////////////////////////////////// -// these cmvs are used by bis handshake /// -/////////////////////////////////////////// - -// Each of the CNFG_TPS entries points to a structure of type (TPS_TC_BearerChannel_t) -#define CNFG_TPS_TC_DS0 0 -#define CNFG_TPS_TC_DS1 1 -#define CNFG_TPS_TC_US0 2 -#define CNFG_TPS_TC_US1 3 - -#define CNFG_HDLC_Overhead_Requirements 4 - -// Each of the CNFG_PMS entries points to a structure of type (PMS_TC_LatencyPath_t) -#define CNFG_PMS_TC_DS0 5 -#define CNFG_PMS_TC_DS1 6 -#define CNFG_PMS_TC_US0 7 -#define CNFG_PMS_TC_US1 8 - -// CNFG_PMD_PARAMETERS points to a structure of type (PMD_params_t) -#define CNFG_PMD_PARAMETERS 9 - -//////////////////////////////////////////////////////////// -// these cmvs are used by bis training and showtime code /// -//////////////////////////////////////////////////////////// - -//////////////// -// Tx Config /// -//////////////// -#define CNFG_tx_Cnfg_Nbc 10 -#define CNFG_tx_Cnfg_Nlp 11 -#define CNFG_tx_Cnfg_Rp 12 -#define CNFG_tx_Cnfg_Mp 13 -#define CNFG_tx_Cnfg_Lp 14 -#define CNFG_tx_Cnfg_Tp 15 -#define CNFG_tx_Cnfg_Dp 16 -#define CNFG_tx_Cnfg_Bpn 17 -#define CNFG_tx_Cnfg_FramingMode 18 -#define CNFG_tx_Cnfg_MSGLp 19 -#define CNFG_tx_Cnfg_MSGc 20 - - -//////////////// -// Rx Config /// -//////////////// -#define CNFG_rx_Cnfg_Nbc 21 -#define CNFG_rx_Cnfg_Nlp 22 -#define CNFG_rx_Cnfg_Rp 23 -#define CNFG_rx_Cnfg_Mp 24 -#define CNFG_rx_Cnfg_Lp 25 -#define CNFG_rx_Cnfg_Tp 26 -#define CNFG_rx_Cnfg_Dp 27 -#define CNFG_rx_Cnfg_Bpn 28 -#define CNFG_rx_Cnfg_FramingMode 29 -#define CNFG_rx_Cnfg_MSGLp 30 -#define CNFG_rx_Cnfg_MSGc 31 - -#define CNFG_tx_Cnfg_BCnToLPp 32 -#define CNFG_rx_Cnfg_BCnToLPp 33 - - - -#endif - diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_sw.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_sw.h deleted file mode 100644 index 13273813a8..0000000000 --- a/target/linux/amazon/files/include/asm-mips/amazon/amazon_sw.h +++ /dev/null @@ -1,177 +0,0 @@ -#ifndef AMAZON_SW_H -#define AMAZON_SW_H -#define SET_ETH_SPEED_AUTO SIOCDEVPRIVATE -#define SET_ETH_SPEED_10 SIOCDEVPRIVATE+1 -#define SET_ETH_SPEED_100 SIOCDEVPRIVATE+2 -#define SET_ETH_DUPLEX_AUTO SIOCDEVPRIVATE+3 -#define SET_ETH_DUPLEX_HALF SIOCDEVPRIVATE+4 -#define SET_ETH_DUPLEX_FULL SIOCDEVPRIVATE+5 -#define SET_ETH_REG SIOCDEVPRIVATE+6 -#define VLAN_TOOLS SIOCDEVPRIVATE+7 -#define MAC_TABLE_TOOLS SIOCDEVPRIVATE+8 - - -/*===mac table commands==*/ -#define RESET_MAC_TABLE 0 -#define READ_MAC_ENTRY 1 -#define WRITE_MAC_ENTRY 2 -#define ADD_MAC_ENTRY 3 - -/*====vlan commands===*/ - -#define CHANGE_VLAN_CTRL 0 -#define READ_VLAN_ENTRY 1 -#define UPDATE_VLAN_ENTRY 2 -#define CLEAR_VLAN_ENTRY 3 -#define RESET_VLAN_TABLE 4 -#define ADD_VLAN_ENTRY 5 - -/* -** MDIO constants. -*/ - -#define MDIO_BASE_STATUS_REG 0x1 -#define MDIO_BASE_CONTROL_REG 0x0 -#define MDIO_PHY_ID_HIGH_REG 0x2 -#define MDIO_PHY_ID_LOW_REG 0x3 -#define MDIO_BC_NEGOTIATE 0x0200 -#define MDIO_BC_FULL_DUPLEX_MASK 0x0100 -#define MDIO_BC_AUTO_NEG_MASK 0x1000 -#define MDIO_BC_SPEED_SELECT_MASK 0x2000 -#define MDIO_STATUS_100_FD 0x4000 -#define MDIO_STATUS_100_HD 0x2000 -#define MDIO_STATUS_10_FD 0x1000 -#define MDIO_STATUS_10_HD 0x0800 -#define MDIO_STATUS_SPEED_DUPLEX_MASK 0x7800 -#define MDIO_ADVERTISMENT_REG 0x4 -#define MDIO_ADVERT_100_FD 0x100 -#define MDIO_ADVERT_100_HD 0x080 -#define MDIO_ADVERT_10_FD 0x040 -#define MDIO_ADVERT_10_HD 0x020 -#define MDIO_LINK_UP_MASK 0x4 -#define MDIO_START 0x1 -#define MDIO_READ 0x2 -#define MDIO_WRITE 0x1 -#define MDIO_PREAMBLE 0xfffffffful - -#define PHY_RESET 0x8000 -#define AUTO_NEGOTIATION_ENABLE 0X1000 -#define AUTO_NEGOTIATION_COMPLETE 0x20 -#define RESTART_AUTO_NEGOTIATION 0X200 - - -#define PHY0_ADDR 0 -#define PHY1_ADDR 1 -#define P1M 0 - -#define AMAZON_SW_REG32(reg_num) *((volatile u32*)(reg_num)) - -#define OK 0; - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -typedef struct mac_table_entry{ - u64 mac_address:48; - u64 p0:1; - u64 p1:1; - u64 p2:1; - u64 cr:1; - u64 ma_st:3; - u64 res:9; -}_mac_table_entry; - -typedef struct IFX_Switch_VLanTableEntry{ - u32 vlan_id:12; - u32 mp0:1; - u32 mp1:1; - u32 mp2:1; - u32 v:1; - u32 res:16; -}_IFX_Switch_VLanTableEntry; - -typedef struct mac_table_req{ - int cmd; - int index; - u32 data; - u64 entry_value; -}_mac_table_req; - -#else //not CONFIG_CPU_LITTLE_ENDIAN -typedef struct mac_table_entry{ - u64 mac_address:48; - u64 p0:1; - u64 p1:1; - u64 p2:1; - u64 cr:1; - u64 ma_st:3; - u64 res:9; -}_mac_table_entry; - -typedef struct IFX_Switch_VLanTableEntry{ - u32 vlan_id:12; - u32 mp0:1; - u32 mp1:1; - u32 mp2:1; - u32 v:1; - u32 res:16; -}_IFX_Switch_VLanTableEntry; - - -typedef struct mac_table_req{ - int cmd; - int index; - u32 data; - u64 entry_value; -}_mac_table_req; - -#endif //CONFIG_CPU_LITTLE_ENDIAN - - - -typedef struct vlan_req{ - int cmd; - int index; - u32 data; - u32 entry_value; -}_vlan_req; - -typedef struct data_req{ - int index; - u32 value; -}_data_req; - -enum duplex -{ - half, - full, - autoneg -}; - -struct switch_priv { - struct net_device_stats stats; - int rx_packetlen; - u8 *rx_packetdata; - int rx_status; - int tx_packetlen; -#ifdef CONFIG_NET_HW_FLOWCONTROL - int fc_bit; -#endif //CONFIG_NET_HW_FLOWCONTROL - u8 *tx_packetdata; - int tx_status; - struct dma_device_info *dma_device; - struct sk_buff *skb; - spinlock_t lock; - int mdio_phy_addr; - int current_speed; - int current_speed_selection; - int rx_queue_len; - int full_duplex; - enum duplex current_duplex; - int num; -}; - -#endif //AMAZON_SW_H - - - - - diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_tpe.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_tpe.h deleted file mode 100644 index a64e6f9f80..0000000000 --- a/target/linux/amazon/files/include/asm-mips/amazon/amazon_tpe.h +++ /dev/null @@ -1,258 +0,0 @@ -#ifndef AMAZON_TPE_H -#define AMAZON_TPE_H -#include <linux/atm.h> -#include <linux/atmdev.h> -#include <linux/netdevice.h> -#include <linux/ioctl.h> - -#ifdef CONFIG_IFX_ATM_MIB -/* For ATM-MIB lists */ -#include <linux/list.h> -#endif -#include <asm/amazon/atm_mib.h> - -/* CBM Queue arranagement - * Q0: free cells pool - * Q1~ Q15: upstream queues - * Q16: QAM downstream - * Q17~Q31: downstream queues - */ -#define AMAZON_ATM_MAX_QUEUE_NUM 32 -#define AMAZON_ATM_PORT_NUM 2 -#define AMAZON_ATM_FREE_CELLS 4000 -#define AMAZON_ATM_MAX_VCC_NUM (AMAZON_ATM_MAX_QUEUE_NUM/2 - 1) -#define AMAZON_AAL0_SDU (ATM_AAL0_SDU+4) //one more word for status -#define CBM_RX_OFFSET 16 //offset from the same q for tx -#define AMAZON_ATM_OAM_Q_ID 16 -#define AMAZON_ATM_RM_Q_ID 16 -#define AMAZON_ATM_OTHER_Q_ID 16 -#define CBM_DEFAULT_Q_OFFSET 1 -#define HTUTIMEOUT 0xffff//timeoutofhtutocbm -#define QSB_WFQ_NONUBR_MAX 0x3f00 -#define QSB_WFQ_UBR_BYPASS 0x3fff -#define QSB_TP_TS_MAX 65472 -#define QSB_TAUS_MAX 64512 -#define QSB_GCR_MIN 18 -#define HTU_RAM_ACCESS_MAX 1024//maxium time for HTU RAM access - -#define SWIE_LOCK 1 -#define PROC_ATM 1 -#define PROC_MIB 2 -#define PROC_VCC 3 -#define PROC_AAL5 4 -#define PROC_CBM 5 -#define PROC_HTU 6 -#define PROC_QSB 7 -#define PROC_SWIE 8 - -/***************** internal data structure ********************/ -typedef int (*push_back_t)(struct atm_vcc *vcc,struct sk_buff *skb,int err) ; -/* Device private data */ -typedef struct{ - u8 padding_byte; - u32 tx_max_sdu; - u32 rx_max_sdu; - u32 cnt_cpy; //no. of packets that need a copy due to alignment -}amazon_aal5_dev_t; - -typedef struct{ - u32 max_q_off; //maxium queues used in real scenario - u32 nrt_thr; - u32 clp0_thr; - u32 clp1_thr; - u32 free_cell_cnt; -#ifdef CONFIG_USE_VENUS - u8 * qd_addr_free; //to work around a bug, bit15 of QDOFF address should be 1 -#endif - u8 * qd_addr; - u8 * mem_addr; - u8 allocated; -}amazon_cbm_dev_t; - -typedef struct{ - -}amazon_htu_dev_t; - -typedef struct{ - u32 tau; //cell delay variation due to concurrency(?) - u32 tstepc; //time step, all legal values are 1,2,4 - u32 sbl; //scheduler burse length (for PHY) -}amazon_qsb_dev_t; - -typedef struct{ - u32 qid; //QID of the current extraction queue - struct semaphore in_sem; // Software-Insertion semaphore - volatile long lock; //lock that avoids race contions between SWIN and SWEX - wait_queue_head_t sleep; //wait queue for SWIE and SWEX - u32 sw; //status word -}amazon_swie_dev_t; - -//AAL5 MIB Counter -typedef struct{ - u32 tx,rx; //number AAL5 CPCS PDU from/to higher-layer - u32 tx_err,rx_err; //ifInErrors and ifOutErros - u32 tx_drop,rx_drop; //discarded received packets due to mm shortage - u32 htu_unp; //number of unknown received cells - u32 rx_cnt_h; //number of octets received, high 32 bits - u32 rx_cnt_l; //number of octets received, low 32 bits - u32 tx_cnt_h; //number of octets transmitted, high 32 bits - u32 tx_cnt_l; //number of octets transmitted, low 32 bits - u32 tx_ppd; //number of cells for AAL5 upstream PPD discards - u64 rx_cells; //number of cells for downstream - u64 tx_cells; //number of cells for upstream - u32 rx_err_cells; //number of cells dropped due to uncorrectable HEC errors -}amazon_mib_counter_t; - - - -typedef enum {QS_PKT,QS_LEN,QS_ERR,QS_HW_DROP,QS_SW_DROP,QS_MAX} qs_t; -//queue statics no. of packet received / sent -//queue statics no. of bytes received / sent -//queue statics no. of packets with error -//queue statics no. of packets dropped by hw -//queue statics no. of packets dropped by sw - -typedef struct{ - push_back_t push; //call back function - struct atm_vcc * vcc; //opened vcc - struct timeval access_time; //time when last F4/F5 user cells arrive - int free; //whether this queue is occupied, 0: occupied, 1: free - u32 aal5VccCrcErrors; //MIB counter - u32 aal5VccOverSizedSDUs; //MIB counter - -#if defined(AMAZON_ATM_DEBUG) || defined (CONFIG_IFX_ATM_MIB) - u32 qs[QS_MAX]; -#endif -}amazon_atm_queue_t; - - -typedef struct{ - int enable; //enable / disable - u32 max_conn; //maximum number of connections per port - u32 tx_max_cr; //Remaining cellrate for this device for tx direction - u32 tx_rem_cr; //Remaining cellrate for this device for tx direction - u32 tx_cur_cr; //Current cellrate for this device for tx direction -}amazon_atm_port_t; - -typedef struct{ - amazon_aal5_dev_t aal5; - amazon_cbm_dev_t cbm; - amazon_htu_dev_t htu; - amazon_qsb_dev_t qsb; - amazon_swie_dev_t swie; - amazon_mib_counter_t mib_counter; - amazon_atm_queue_t queues[AMAZON_ATM_MAX_QUEUE_NUM]; - amazon_atm_port_t ports[AMAZON_ATM_PORT_NUM]; - atomic_t dma_tx_free_0;//TX_CH0 has availabe descriptors -} amazon_atm_dev_t; - -struct oam_last_activity{ - u8 vpi; //vpi for this connection - u16 vci; //vci for t his connection - struct timeval stamp; //time when last F4/F5 user cells arrive - struct oam_last_activity * next;//for link list purpose -}; - -typedef union{ -#ifdef CONFIG_CPU_LITTLE_ENDIAN - struct{ - u32 tprs :16; - u32 twfq :14; - u32 vbr :1; - u32 reserved :1; - }bit; - u32 w0; -#else - struct{ - u32 reserved :1; - u32 vbr :1; - u32 twfq :14; - u32 tprs :16; - }bit; - u32 w0; -#endif - -}qsb_qptl_t; - -typedef union{ -#ifdef CONFIG_CPU_LITTLE_ENDIAN - struct{ - u32 ts :16; - u32 taus :16; - }bit; - u32 w0; -#else - struct{ - u32 taus :16; - u32 ts :16; - }bit; - u32 w0; -#endif -}qsb_qvpt_t; - - - -struct amazon_atm_cell_header { -#ifdef CONFIG_CPU_LITTLE_ENDIAN - struct{ - u32 clp :1; // Cell Loss Priority - u32 pti :3; // Payload Type Identifier - u32 vci :16; // Virtual Channel Identifier - u32 vpi :8; // Vitual Path Identifier - u32 gfc :4; // Generic Flow Control - }bit; -#else - struct{ - u32 gfc :4; // Generic Flow Control - u32 vpi :8; // Vitual Path Identifier - u32 vci :16; // Virtual Channel Identifier - u32 pti :3; // Payload Type Identifier - u32 clp :1; // Cell Loss Priority - }bit; -#endif -}; - - -/************************ Function Declarations **************************/ -amazon_atm_dev_t * amazon_atm_create(void); -int amazon_atm_open(struct atm_vcc *vcc,push_back_t); -int amazon_atm_send(struct atm_vcc *vcc,struct sk_buff *skb); -int amazon_atm_send_oam(struct atm_vcc *vcc,void *cell, int flags); -void amazon_atm_close(struct atm_vcc *vcc); -void amazon_atm_cleanup(void); -const struct oam_last_activity* get_oam_time_stamp(void); - -//mib-related -int amazon_atm_cell_mib(atm_cell_ifEntry_t * to,u32 itf); -int amazon_atm_aal5_mib(atm_aal5_ifEntry_t * to); -int amazon_atm_vcc_mib(struct atm_vcc *vcc,atm_aal5_vcc_t * to); -int amazon_atm_vcc_mib_x(int vpi, int vci,atm_aal5_vcc_t* to); - -#define AMAZON_WRITE_REGISTER_L(data,addr) do{ *((volatile u32*)(addr)) = (u32)(data); wmb();} while (0) -#define AMAZON_READ_REGISTER_L(addr) (*((volatile u32*)(addr))) -/******************************* ioctl stuff****************************************/ -#define NUM(dev) (MINOR(dev) & 0xf) -/* - * Ioctl definitions - */ -/* Use 'o' as magic number */ -#define AMAZON_ATM_IOC_MAGIC 'o' -/* MIB_CELL: get atm cell level mib counter - * MIB_AAL5: get aal5 mib counter - * MIB_VCC: get vcc mib counter - */ -typedef struct{ - int vpi; - int vci; - atm_aal5_vcc_t mib_vcc; -}atm_aal5_vcc_x_t; -#define AMAZON_ATM_MIB_CELL _IOWR(AMAZON_ATM_IOC_MAGIC, 0, atm_cell_ifEntry_t) -#define AMAZON_ATM_MIB_AAL5 _IOWR(AMAZON_ATM_IOC_MAGIC, 1, atm_aal5_ifEntry_t) -#define AMAZON_ATM_MIB_VCC _IOWR(AMAZON_ATM_IOC_MAGIC, 2, atm_aal5_vcc_x_t) -#define AMAZON_ATM_IOC_MAXNR 3 - -//sockopt -#define SO_AMAZON_ATM_MIB_VCC __SO_ENCODE(SOL_ATM,5,atm_aal5_vcc_t) - -#endif // AMAZON_TPE_H - diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_wdt.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_wdt.h deleted file mode 100644 index 775dabccfb..0000000000 --- a/target/linux/amazon/files/include/asm-mips/amazon/amazon_wdt.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef AMAZON_WDT_H -#define AMAZON_WDT_H -#ifdef __KERNEL__ -typedef struct wdt_dev{ - char name[16]; - int major; - int minor; - - int full; - char buff[10]; -}wdt_dev; -#define AMAZON_WDT_REG32(addr) (*((volatile u32*)(addr))) -#endif //__KERNEL__ - -//AMAZON_WDT_IOC_START: start the WDT timer (must provide a initial timeout value) -//AMAZON_WDT_IOC_STOP: stop the WDT -//AMAZON_WDT_IOC_PING: reload the timer to initial value (must happend after a AMAZON_WDT_IOC_START) -#define AMAZON_WDT_IOC_MAGIC 0xc0 -#define AMAZON_WDT_IOC_START _IOW( AMAZON_WDT_IOC_MAGIC,0, int) -#define AMAZON_WDT_IOC_STOP _IO( AMAZON_WDT_IOC_MAGIC,1) -#define AMAZON_WDT_IOC_PING _IO( AMAZON_WDT_IOC_MAGIC,2) - -#endif //AMAZON_WDT_H diff --git a/target/linux/amazon/files/include/asm-mips/amazon/atm_defines.h b/target/linux/amazon/files/include/asm-mips/amazon/atm_defines.h deleted file mode 100644 index 8adda20051..0000000000 --- a/target/linux/amazon/files/include/asm-mips/amazon/atm_defines.h +++ /dev/null @@ -1,540 +0,0 @@ -#ifndef ATM_DEFINES_H -#define ATM_DEFINES_H - -//Registers Base Address -#define IO_BASE_ADDR 0xA0000000 -#define AAL5_BASE_ADDRESS 0x10104400+IO_BASE_ADDR -#define CBM_BASE_ADDRESS 0x10104000+IO_BASE_ADDR -#define HTU_BASE_ADDRESS 0x10105100+IO_BASE_ADDR -#define QSB_BASE_ADDRESS 0x10105000+IO_BASE_ADDR -#define SWIE_BASE_ADDRESS 0x10105200+IO_BASE_ADDR - -//AAL5 Registers -#define AAL5_SISR0_ADDR AAL5_BASE_ADDRESS+0x20 -#define AAL5_SIMR0_ADDR AAL5_BASE_ADDRESS+0x24 -#define AAL5_SISR1_ADDR AAL5_BASE_ADDRESS+0x28 -#define AAL5_SIMR1_ADDR AAL5_BASE_ADDRESS+0x2C -#define AAL5_SMFL_ADDR AAL5_BASE_ADDRESS+0x30 -#define AAL5_SATMHD_ADDR AAL5_BASE_ADDRESS+0x34 -#define AAL5_SCON_ADDR AAL5_BASE_ADDRESS+0x38 -#define AAL5_SCMD_ADDR AAL5_BASE_ADDRESS+0x3C -#define AAL5_RISR0_ADDR AAL5_BASE_ADDRESS+0x40 -#define AAL5_RIMR0_ADDR AAL5_BASE_ADDRESS+0x44 -#define AAL5_RISR1_ADDR AAL5_BASE_ADDRESS+0x48 -#define AAL5_RIMR1_ADDR AAL5_BASE_ADDRESS+0x4C -#define AAL5_RMFL_ADDR AAL5_BASE_ADDRESS+0x50 -#define AAL5_RINTINF0_ADDR AAL5_BASE_ADDRESS+0x54 -#define AAL5_RINTINF1_ADDR AAL5_BASE_ADDRESS+0x58 -#define AAL5_RES5C_ADDR AAL5_BASE_ADDRESS+0x5C -#define AAL5_RIOL_ADDR AAL5_BASE_ADDRESS+0x60 -#define AAL5_RIOM_ADDR AAL5_BASE_ADDRESS+0x64 -#define AAL5_SOOL_ADDR AAL5_BASE_ADDRESS+0x68 -#define AAL5_SOOM_ADDR AAL5_BASE_ADDRESS+0x6C -#define AAL5_RES70_ADDR AAL5_BASE_ADDRESS+0x70 -#define AAL5_RES74_ADDR AAL5_BASE_ADDRESS+0x74 -#define AAL5_RES78_ADDR AAL5_BASE_ADDRESS+0x78 -#define AAL5_RES7C_ADDR AAL5_BASE_ADDRESS+0x7C -#define AAL5_RES80_ADDR AAL5_BASE_ADDRESS+0x80 -#define AAL5_RES84_ADDR AAL5_BASE_ADDRESS+0x84 -#define AAL5_RES88_ADDR AAL5_BASE_ADDRESS+0x88 -#define AAL5_RES8C_ADDR AAL5_BASE_ADDRESS+0x8C -#define AAL5_RES90_ADDR AAL5_BASE_ADDRESS+0x90 -#define AAL5_RES94_ADDR AAL5_BASE_ADDRESS+0x94 -#define AAL5_RES98_ADDR AAL5_BASE_ADDRESS+0x98 -#define AAL5_RES9C_ADDR AAL5_BASE_ADDRESS+0x9C -#define AAL5_RESA0_ADDR AAL5_BASE_ADDRESS+0xA0 -#define AAL5_RESA4_ADDR AAL5_BASE_ADDRESS+0xA4 -#define AAL5_RESA8_ADDR AAL5_BASE_ADDRESS+0xA8 -#define AAL5_RESAC_ADDR AAL5_BASE_ADDRESS+0xAC -#define AAL5_RESB0_ADDR AAL5_BASE_ADDRESS+0xB0 -#define AAL5_RESB4_ADDR AAL5_BASE_ADDRESS+0xB4 -#define AAL5_RESB8_ADDR AAL5_BASE_ADDRESS+0xB8 -#define AAL5_RESBC_ADDR AAL5_BASE_ADDRESS+0xBC -#define AAL5_RESC0_ADDR AAL5_BASE_ADDRESS+0xC0 -#define AAL5_RESC4_ADDR AAL5_BASE_ADDRESS+0xC4 -#define AAL5_RESC8_ADDR AAL5_BASE_ADDRESS+0xC8 -#define AAL5_RESCC_ADDR AAL5_BASE_ADDRESS+0xCC -#define AAL5_RESD0_ADDR AAL5_BASE_ADDRESS+0xD0 -#define AAL5_RESD4_ADDR AAL5_BASE_ADDRESS+0xD4 -#define AAL5_RESD8_ADDR AAL5_BASE_ADDRESS+0xD8 -#define AAL5_RESDC_ADDR AAL5_BASE_ADDRESS+0xDC -#define AAL5_RESE0_ADDR AAL5_BASE_ADDRESS+0xE0 -#define AAL5_RESE4_ADDR AAL5_BASE_ADDRESS+0xE4 -#define AAL5_RESE8_ADDR AAL5_BASE_ADDRESS+0xE8 -#define AAL5_RESEC_ADDR AAL5_BASE_ADDRESS+0xEC -#define AAL5_SSRC0_ADDR AAL5_BASE_ADDRESS+0xF0 -#define AAL5_SSRC1_ADDR AAL5_BASE_ADDRESS+0xF4 -#define AAL5_RSRC0_ADDR AAL5_BASE_ADDRESS+0xF8 -#define AAL5_RSRC1_ADDR AAL5_BASE_ADDRESS+0xFC - -#define AAL5S_ISR_QID_MASK 0xFF000000 -#define AAL5S_ISR_SAB 0x00000100 -#define AAL5S_ISR_SE 0x00000080 -#define AAL5S_ISR_MFLE 0x00000040 -#define AAL5S_ISR_SBE0 0x00000020 -#define AAL5S_ISR_SEG0 0x00000010 -#define AAL5S_ISR_TAB 0x00000004 - -#define AAL5_SIMR_MASK 0x000001c7 -#define AAL5_SIMR_SAB 0x00000100 -#define AAL5_SIMR_SE 0x00000080 -#define AAL5_SIMR_MFLE 0x00000040 -#define AAL5_SIMR_TAB 0x00000004 -#define AAL5_SIMR_SBE0 0x00000002 -#define AAL5_SIMR_SEG0 0x00000001 - -#define AAL5_SCMD_SEQCOUNT_MASK 0x0000ff00 -#define AAL5_SCMD_MODE_POLL 0x00000008 -#define AAL5_SCMD_MODE_COUNT 0x00000000 -#define AAL5_SCMD_AS 0x00000004 -#define AAL5_SCMD_SS 0x00000002 -#define AAL5_SCMD_AR 0x00000001 - -#define AAL5R_ISR_CID_MASK 0xFF000000//ConnectionID -#define AAL5R_ISR_DBC_MASK 0x00FF0000//DiscardedByteCounter -#define AAL5R_ISR_END 0x00002000//End -#define AAL5R_ISR_ICID 0x00001000//InvalidConnectionID -#define AAL5R_ISR_CLP 0x00000800//CellLossPriority -#define AAL5R_ISR_CGST 0x00000400//Congestion -#define AAL5R_ISR_UUE 0x00000200//CPCSUUError -#define AAL5R_ISR_CPIE 0x00000100//CPIError -#define AAL5R_ISR_FE 0x00000080//FrameEnd -#define AAL5R_ISR_MFLE 0x00000040//MaximumFrameLengthExceeded -#define AAL5R_ISR_DBCE 0x00000020//DiscardedByteCounterExceeded -#define AAL5R_ISR_CRC 0x00000010//CRCError -#define AAL5R_ISR_ILEN 0x00000008//InvalidLength -#define AAL5R_ISR_RAB 0x00000004//ReceiveAbort - -#define AAL5_RIMR1_MASK 0x00003ffc -#define AAL5_RIMR1_END 0x00002000//End -#define AAL5_RIMR1_ICID 0x00001000//InvalidConnectionID -#define AAL5_RIMR1_CLP 0x00000800//CellLossPriority -#define AAL5_RIMR1_CGST 0x00000400//Congestion -#define AAL5_RIMR1_UUE 0x00000200//CPCSUUError -#define AAL5_RIMR1_CPIE 0x00000100//CPIError -#define AAL5_RIMR1_FE 0x00000080//FrameEnd -#define AAL5_RIMR1_MFLE 0x00000040//MaximumFrameLengthExceeded -#define AAL5_RIMR1_DBCE 0x00000020//DiscardedByteCounterExceeded -#define AAL5_RIMR1_CRC 0x00000010//CRCError -#define AAL5_RIMR1_ILEN 0x00000008//InvalidLength -#define AAL5_RIMR1_RAB 0x00000004//ReceiveAbort - -//AAL5 Reassambly Errors -#define AAL5_STW1_MASK 0x33//Error mask -#define AAL5_STW0_MASK 0x5c//Error mask -#define AAL5_STW0_BE 0x3//padding bytes mask -#define AAL5_STW1_CBM 0x20//Transfer from CBM to A5R abnormally ended -#define AAL5_STW1_CH 0x10//Invalid Channel number error -#define AAL5_STW1_CLP 0x8//CLP value of cells in packet is 1 -#define AAL5_STW1_CG 0x4//Cell in packet expired congestion -#define AAL5_STW1_UU 0x2//CPCS-UU value error -#define AAL5_STW1_CPI 0x1//CPI value error -#define AAL5_STW0_FE 0x80//Frame end -#define AAL5_STW0_MFL 0x40//Maximum frame length error -#define AAL5_STW0_CRC 0x10//CRC error -#define AAL5_STW0_IL 0x8//Invalid length -#define AAL5_STW0_RA 0x4//Received abort - - - -//CBM Registers -#define CBM_NRTTHR_ADDR CBM_BASE_ADDRESS+0x10//NonRealTimeThreshold -#define CBM_CLP0THR_ADDR CBM_BASE_ADDRESS+0x14//CLP0Threshold -#define CBM_CLP1THR_ADDR CBM_BASE_ADDRESS+0x18//CLP1Threshold -#define CBM_QDOFF_ADDR CBM_BASE_ADDRESS+0x1C//QueueDescriptorOffset -#define CBM_CFG_ADDR CBM_BASE_ADDRESS+0x20//Configuration -#define CBM_HWEXPAR0_ADDR CBM_BASE_ADDRESS+0x24//HWExtractParameter0 -#define CBM_RES28_ADDR CBM_BASE_ADDRESS+0x28 -#define CBM_WMSTAT0_ADDR CBM_BASE_ADDRESS+0x2C -#define CBM_HWEXCMD_ADDR CBM_BASE_ADDRESS+0x30//HWExtractCommand0 -#define CBM_RES34_ADDR CBM_BASE_ADDRESS+0x34 -#define CBM_HWEXSTAT0_ADDR CBM_BASE_ADDRESS+0x38//HWExtractStatus0 -#define CBM_RES3C_ADDR CBM_BASE_ADDRESS+0x3C -#define CBM_RES40_ADDR CBM_BASE_ADDRESS+0x40 -#define CBM_CNT_ADDR CBM_BASE_ADDRESS+0x44//CellCount -#define CBM_RES48_ADDR CBM_BASE_ADDRESS+0x48 -#define CBM_LFR_ADDR CBM_BASE_ADDRESS+0x4C//PointertolastCellinfreeCellQueue -#define CBM_FFR_ADDR CBM_BASE_ADDRESS+0x50//PointertofirstCellinfreeCellQueue -#define CBM_RES54_ADDR CBM_BASE_ADDRESS+0x54 -#define CBM_RES58_ADDR CBM_BASE_ADDRESS+0x58 -#define CBM_RES5C_ADDR CBM_BASE_ADDRESS+0x5C -#define CBM_RES60_ADDR CBM_BASE_ADDRESS+0x60 -#define CBM_RES64_ADDR CBM_BASE_ADDRESS+0x64 -#define CBM_RES68_ADDR CBM_BASE_ADDRESS+0x68 -#define CBM_RES6C_ADDR CBM_BASE_ADDRESS+0x6C -#define CBM_RES70_ADDR CBM_BASE_ADDRESS+0x70 -#define CBM_RES74_ADDR CBM_BASE_ADDRESS+0x74 -#define CBM_RES78_ADDR CBM_BASE_ADDRESS+0x78 -#define CBM_RES7C_ADDR CBM_BASE_ADDRESS+0x7C -#define CBM_RES80_ADDR CBM_BASE_ADDRESS+0x80 -#define CBM_RES84_ADDR CBM_BASE_ADDRESS+0x84 -#define CBM_RES88_ADDR CBM_BASE_ADDRESS+0x88 -#define CBM_RES8C_ADDR CBM_BASE_ADDRESS+0x8C -#define CBM_RES90_ADDR CBM_BASE_ADDRESS+0x90 -#define CBM_RES94_ADDR CBM_BASE_ADDRESS+0x94 -#define CBM_RES98_ADDR CBM_BASE_ADDRESS+0x98 -#define CBM_RES9C_ADDR CBM_BASE_ADDRESS+0x9C -#define CBM_RESA0_ADDR CBM_BASE_ADDRESS+0xA0 -#define CBM_RESA4_ADDR CBM_BASE_ADDRESS+0xA4 -#define CBM_RESA8_ADDR CBM_BASE_ADDRESS+0xA8 -#define CBM_RESAC_ADDR CBM_BASE_ADDRESS+0xAC -#define CBM_RESB0_ADDR CBM_BASE_ADDRESS+0xB0 -#define CBM_RESB4_ADDR CBM_BASE_ADDRESS+0xB4 -#define CBM_RESB8_ADDR CBM_BASE_ADDRESS+0xB8 -#define CBM_RESBC_ADDR CBM_BASE_ADDRESS+0xBC -#define CBM_INTINF0_ADDR CBM_BASE_ADDRESS+0xC0//InterruptInfo0 -#define CBM_INTCMD_ADDR CBM_BASE_ADDRESS+0xC4//InterruptCommand0 -#define CBM_IMR0_ADDR CBM_BASE_ADDRESS+0xC8//InterruptMask -#define CBM_SRC0_ADDR CBM_BASE_ADDRESS+0xCC//ServiceRequestControl -#define CBM_RESD0_ADDR CBM_BASE_ADDRESS+0xD0 -#define CBM_RESD4_ADDR CBM_BASE_ADDRESS+0xD4 -#define CBM_RESD8_ADDR CBM_BASE_ADDRESS+0xD8 -#define CBM_RESDC_ADDR CBM_BASE_ADDRESS+0xDC -#define CBM_RESE0_ADDR CBM_BASE_ADDRESS+0xE0 -#define CBM_AAL5IDIS_ADDR CBM_BASE_ADDRESS+0xE4//MIB-No.EPDdiscardedpacketsupstream -#define CBM_AAL5ODIS_ADDR CBM_BASE_ADDRESS+0xE8//MIB-No.PPDdiscardedpacketsupstream -#define CBM_RESEC_ADDR CBM_BASE_ADDRESS+0xEC -#define CBM_RESF0_ADDR CBM_BASE_ADDRESS+0xF0 -#define CBM_RESF4_ADDR CBM_BASE_ADDRESS+0xF4 -#define CBM_RESF8_ADDR CBM_BASE_ADDRESS+0xF8 -#define CBM_RESFC_ADDR CBM_BASE_ADDRESS+0xFC - -//CBMCFG -#define CBM_CFG_INTLCK0EN 0x00000008 -#define CBM_CFG_INT0HLT 0x00000004 -#define CBM_CFG_START 0x00000001 - -#define CBM_HWEXPAR_PN_A5 0x00002000 -#define CBM_HWEXPAR_PN_CM 0x00000000 -#define CBM_HWEXPAR_SUBADD_PORTMASK 0x00000070 -#define CBM_HWEXPAR_SUBADD_ADU 0x00000000 -#define CBM_HWEXPAR_SUBADD_AAL2 0x00000080 -#define CBM_HWEXPAR_SUBADD_SWIE 0x00000100 - -#define CBM_HWEXCMD_SFE2 0x00000100 -#define CBM_HWEXCMD_FE2 0x00000080 -#define CBM_HWEXCMD_SCE2 0x00000040 -#define CBM_HWEXCMD_SFE1 0x00000020 -#define CBM_HWEXCMD_FE1 0x00000010 -#define CBM_HWEXCMD_SCE1 0x00000008 -#define CBM_HWEXCMD_SFE0 0x00000004 -#define CBM_HWEXCMD_FE0 0x00000002 -#define CBM_HWEXCMD_SCE0 0x00000001 - -#define CBM_INTINF0_QID_MASK 0xFF000000 -#define CBM_INTINF0_ORIGIN_MASK 0x00F00000 -#define CBM_INTINF0_EF 0x00004000 -#define CBM_INTINF0_ACA 0x00002000 -#define CBM_INTINF0_ERR 0x00001000 -#define CBM_INTINF0_DISC 0x00000800 -#define CBM_INTINF0_QSBV 0x00000400 -#define CBM_INTINF0_Q0E 0x00000200 -#define CBM_INTINF0_Q0I 0x00000100 -#define CBM_INTINF0_RDE 0x00000080 -#define CBM_INTINF0_OPF 0x00000040 -#define CBM_INTINF0_NFCA 0x00000020 -#define CBM_INTINF0_CLP1TR 0x00000010 -#define CBM_INTINF0_CLP0TR 0x00000008 -#define CBM_INTINF0_NRTTR 0x00000004 -#define CBM_INTINF0_QFD 0x00000002 -#define CBM_INTINF0_QTR 0x00000001 -#define CBM_INTINF0_QID_SHIFT 24 -//CBM QD Word 3 -#define CBM_QD_W3_QOS_0 0x00000000 -#define CBM_QD_W3_QOS_1 0x40000000 -#define CBM_QD_W3_QOS_2 0x80000000 -#define CBM_QD_W3_QOS_3 0xc0000000 - -#define CBM_QD_W3_DIR_UP 0x20000000 -#define CBM_QD_W3_DIR_DOWN 0x00000000 - -#define CBM_QD_W3_CLPt 0x10000000 -#define CBM_QD_W3_RT 0x08000000 -#define CBM_QD_W3_AAL5 0x04000000 - -#define CBM_QD_W3_INT_NOINT 0x00000000 -#define CBM_QD_W3_INT_ACA 0x01000000 -#define CBM_QD_W3_INT_EOF 0x02000000 -#define CBM_QD_W3_INT_BOTH 0x03000000 - -#define CBM_QD_W3_THRESHOLD_MASK 0x00ff0000 -#define CBM_QD_W3_WM_EN 0x00000010 -#define CBM_QD_W3_HCR 0x00000008 -#define CBM_QD_W3_SBID_MASK 0x00000001 - -#define CBM_QD_W3_THRESHOLD_SHIFT 16 - -//WATER MARK STATUS -#define CBM_WM_NRT_MASK 0x00040000 -#define CBM_WM_CLP0_MASK 0x00020000 -#define CBM_WM_CLP1_MASK 0x00010000 - -//CBMNRTTHR, CBMCLP0THR, CBMCLP0THR -#define CBM_NRT_WM_NONE 0x00000000//no water mark -#define CBM_WM_3_1 0x00010000//3/4 to set, 1/4 to release -#define CBM_WM_3_2 0x00020000//3/4 to set, 2/4 to release -#define CBM_WM_2_1 0x00030000//2/4 to set, 1/4 to release -#define CBM_THR_MASK 0x0000FFFF - -#define CBM_IMR_MASK 0x0000fbff -#define CBM_IMR_reserved 0xFFFF0400 -#define CBM_IMR_RFULL 0x00008000//EndofFrame -#define CBM_IMR_EF 0x00004000//EndofFrame -#define CBM_IMR_ACA 0x00002000//AnyCellArrived -#define CBM_IMR_ERR 0x00001000//FPI Error -#define CBM_IMR_DISC 0x00000800//Discard -#define CBM_IMR_reserved1 0x00000400//reserved -#define CBM_IMR_Q0E 0x00000200//Queue0Extract -#define CBM_IMR_Q0I 0x00000100//Queue0Insert -#define CBM_IMR_RDE 0x00000080//ReadEmptyQueue -#define CBM_IMR_OPF 0x00000040//OncePerFrame -#define CBM_IMR_NFCA 0x00000020//NoFreeCellAvailable -#define CBM_IMR_CLP1TR 0x00000010//CLP1ThresholdReached -#define CBM_IMR_CLP0TR 0x00000008//CLP0ThresholdReached -#define CBM_IMR_NRTTR 0x00000004//NonRealTimeThresholdReached -#define CBM_IMR_QFD 0x00000002//QueueFrameDiscard -#define CBM_IMR_QTR 0x00000001//QueueThresholdReached - -#define CBM_EXSTAT_FB 0x00000010 -#define CBM_EXSTAT_SCB 0x00000008 -#define CBM_EXSTAT_Q0 0x00000004 -#define CBM_EXSTAT_RDE 0x00000002 -#define CBM_EXSTAT_QV 0x00000001 - -//HTU Registers -#define HTU_RX0_ADDR HTU_BASE_ADDRESS+0x10 -#define HTU_RX1_ADDR HTU_BASE_ADDRESS+0x14 -#define HTU_RES18_ADDR HTU_BASE_ADDRESS+0x18 -#define HTU_RES1C_ADDR HTU_BASE_ADDRESS+0x1C -#define HTU_RES20_ADDR HTU_BASE_ADDRESS+0x20 -#define HTU_RES24_ADDR HTU_BASE_ADDRESS+0x24 -#define HTU_RES28_ADDR HTU_BASE_ADDRESS+0x28 -#define HTU_RES2C_ADDR HTU_BASE_ADDRESS+0x2C -#define HTU_PCF0PAT_ADDR HTU_BASE_ADDRESS+0x30 -#define HTU_PCF1PAT_ADDR HTU_BASE_ADDRESS+0x34 -#define HTU_RES38_ADDR HTU_BASE_ADDRESS+0x38 -#define HTU_RES3C_ADDR HTU_BASE_ADDRESS+0x3C -#define HTU_RES40_ADDR HTU_BASE_ADDRESS+0x40 -#define HTU_RES44_ADDR HTU_BASE_ADDRESS+0x44 -#define HTU_RES48_ADDR HTU_BASE_ADDRESS+0x48 -#define HTU_RES4C_ADDR HTU_BASE_ADDRESS+0x4C -#define HTU_PCF0MASK_ADDR HTU_BASE_ADDRESS+0x50 -#define HTU_PCF1MASK_ADDR HTU_BASE_ADDRESS+0x54 -#define HTU_RES58_ADDR HTU_BASE_ADDRESS+0x58 -#define HTU_RES5C_ADDR HTU_BASE_ADDRESS+0x5C -#define HTU_RES60_ADDR HTU_BASE_ADDRESS+0x60 -#define HTU_RES64_ADDR HTU_BASE_ADDRESS+0x64 -#define HTU_RES68_ADDR HTU_BASE_ADDRESS+0x68 -#define HTU_RES6C_ADDR HTU_BASE_ADDRESS+0x6C -#define HTU_TIMEOUT_ADDR HTU_BASE_ADDRESS+0x70 -#define HTU_DESTOAM_ADDR HTU_BASE_ADDRESS+0x74 -#define HTU_DESTRM_ADDR HTU_BASE_ADDRESS+0x78 -#define HTU_DESTOTHER_ADDR HTU_BASE_ADDRESS+0x7C -#define HTU_CFG_ADDR HTU_BASE_ADDRESS+0x80 -#define HTU_RES84_ADDR HTU_BASE_ADDRESS+0x84 -#define HTU_RES88_ADDR HTU_BASE_ADDRESS+0x88 -#define HTU_RES8C_ADDR HTU_BASE_ADDRESS+0x8C -#define HTU_INFNOENTRY_ADDR HTU_BASE_ADDRESS+0x90 -#define HTU_INFTIMEOUT_ADDR HTU_BASE_ADDRESS+0x94 -#define HTU_RES98_STAT HTU_BASE_ADDRESS+0x98 -#define HTU_RES9C_ADDR HTU_BASE_ADDRESS+0x9C -#define HTU_MIBCIUP HTU_BASE_ADDRESS+0xA0//MIB Counter In Unknown Protoc Register -#define HTU_CNTTIMEOUT_ADDR HTU_BASE_ADDRESS+0xA4 -#define HTU_RESA8_ADDR HTU_BASE_ADDRESS+0xA8 -#define HTU_RESAC_ADDR HTU_BASE_ADDRESS+0xAC -#define HTU_RAMADDR_ADDR HTU_BASE_ADDRESS+0xB0 -#define HTU_RAMCMD_ADDR HTU_BASE_ADDRESS+0xB4 -#define HTU_RAMSTAT_ADDR HTU_BASE_ADDRESS+0xB8 -#define HTU_RESBC_ADDR HTU_BASE_ADDRESS+0xBC -#define HTU_RAMDAT1_ADDR HTU_BASE_ADDRESS+0xC0 -#define HTU_RAMDAT2_ADDR HTU_BASE_ADDRESS+0xC4 -#define HTU_RESCC_ADDR HTU_BASE_ADDRESS+0xCC -#define HTU_RESD0_ADDR HTU_BASE_ADDRESS+0xD0 -#define HTU_RESD4_ADDR HTU_BASE_ADDRESS+0xD4 -#define HTU_RESD8_ADDR HTU_BASE_ADDRESS+0xD8 -#define HTU_RESDC_ADDR HTU_BASE_ADDRESS+0xDC -#define HTU_RESE0_ADDR HTU_BASE_ADDRESS+0xE0 -#define HTU_RESE4_ADDR HTU_BASE_ADDRESS+0xE4 -#define HTU_IMR0_ADDR HTU_BASE_ADDRESS+0xE8 -#define HTU_RESEC_ADDR HTU_BASE_ADDRESS+0xEC -#define HTU_ISR0_ADDR HTU_BASE_ADDRESS+0xF0 -#define HTU_RESF4_ADDR HTU_BASE_ADDRESS+0xF4 -#define HTU_SRC0_ADDR HTU_BASE_ADDRESS+0xF8 -#define HTU_RESFC_ADDR HTU_BASE_ADDRESS+0xFC - -//HTU_CFG -#define HTU_CFG_START 0x00000001 - -#define HTU_RAMCMD_RMW 0x00000004 -#define HTU_RAMCMD_RD 0x00000002 -#define HTU_RAMCMD_WR 0x00000001 - -#define HTU_RAMDAT1_VCON 0x00000080//validconnection -#define HTU_RAMDAT1_VCT 0x00000040//vcivalueistransparent -#define HTU_RAMDAT1_QIDS 0x00000020//qid selects a cell in cbm -#define HTU_RAMDAT1_VCI3 0x00000010//vci3->oamqueue -#define HTU_RAMDAT1_VCI4 0x00000008//vci4->oamqueue -#define HTU_RAMDAT1_VCI6 0x00000004//vci6->rmqueue -#define HTU_RAMDAT1_PTI4 0x00000002//pti4->oamqueue -#define HTU_RAMDAT1_PTI5 0x00000001//pti5->oamqueue - -#define HTU_RAMDAT2_PTI6 0x00000800 -#define HTU_RAMDAT2_PTI7 0x00000400 -#define HTU_RAMDAT2_F4U 0x00000200 -#define HTU_RAMDAT2_F5U 0x00000100 -#define HTU_RAMDAT2_QID_MASK 0x000000ff - -#define HTU_ISR_NE 0x00000001 -#define HTU_ISR_TORD 0x00000002 -#define HTU_ISR_IT 0x00000008 -#define HTU_ISR_OTOC 0x00000010 -#define HTU_ISR_ONEC 0x00000020 -#define HTU_ISR_PNE 0x00000040 -#define HTU_ISR_PT 0x00000080 -#define HTU_ISR_MASK 0x000000ff - - -//QSB Registers -#define QSB_BIP0_ADDR QSB_BASE_ADDRESS+0x00 -#define QSB_BIP1_ADDR QSB_BASE_ADDRESS+0x04 -#define QSB_BIP2_ADDR QSB_BASE_ADDRESS+0x08 -#define QSB_BIP3_ADDR QSB_BASE_ADDRESS+0x0C -#define QSB_RSVP_ADDR QSB_BASE_ADDRESS+0x10 -#define QSB_TNOW_ADDR QSB_BASE_ADDRESS+0x14 -#define QSB_TNOWCYC_ADDR QSB_BASE_ADDRESS+0x18 -#define QSB_TAU_ADDR QSB_BASE_ADDRESS+0x1C -#define QSB_L1BRS_ADDR QSB_BASE_ADDRESS+0x20 -#define QSB_SBL_ADDR QSB_BASE_ADDRESS+0x24 -#define QSB_CONFIG_ADDR QSB_BASE_ADDRESS+0x28 -#define QSB_RTM_ADDR QSB_BASE_ADDRESS+0x2C -#define QSB_RTD_ADDR QSB_BASE_ADDRESS+0x30 -#define QSB_RAMAC_ADDR QSB_BASE_ADDRESS+0x34 -#define QSB_ISR_ADDR QSB_BASE_ADDRESS+0x38 -#define QSB_IMR_ADDR QSB_BASE_ADDRESS+0x3C -#define QSB_SRC_ADDR QSB_BASE_ADDRESS+0x40 - -#define QSB_TABLESEL_QVPT 8 -#define QSB_TABLESEL_QPT 1 -#define QSB_TABLESEL_SCT 2 -#define QSB_TABLESEL_SPT 3 -#define QSB_TABLESEL_CALENDARWFQ 4/*notusedbyFW*/ -#define QSB_TABLESEL_L2WFQ 5/*notusedbyFW*/ -#define QSB_TABLESEL_CALENDARRS 6/*notusedbyFW*/ -#define QSB_TABLESEL_L2BITMAPRS 7/*notusedbyFW*/ -#define QSB_TABLESEL_SHIFT 24 -#define QSB_TWFQ_MASK 0x3FFF0000 -#define QSB_TPRS_MASK 0x0000FFFF -#define QSB_SBID_MASK 0xF -#define QSB_TWFQ_SHIFT 16 -#define QSB_SCDRATE_MASK 0x00007FFF -#define QSB_SBVALID_MASK 0x80000000 - -#define QSB_ISR_WFQLE 0x00000001 -#define QSB_ISR_WFQBE 0x00000002 -#define QSB_ISR_RSLE 0x00000004 -#define QSB_ISR_RSBE 0x00000008 -#define QSB_ISR_MUXOV 0x00000010 -#define QSB_ISR_CDVOV 0x00000020 -#define QSB_ISR_PARAMI 0x00000040 -#define QSB_ISR_SLOSS 0x00000080 -#define QSB_ISR_IIPS 0x00000100 - -#define QSB_IMR_WFQLE 0x00000001 -#define QSB_IMR_WFQBE 0x00000002 -#define QSB_IMR_RSLE 0x00000004 -#define QSB_IMR_RSBE 0x00000008 -#define QSB_IMR_MUXOV 0x00000010 -#define QSB_IMR_CDVOV 0x00000020 -#define QSB_IMR_PARAMI 0x00000040 -#define QSB_IMR_SLOSS 0x00000080 -#define QSB_IMR_IIPS 0x00000100 - -#define QSB_READ 0x0 -#define QSB_WRITE 0x80000000 -#define QSB_READ_ALL 0xFFFFFFFF - -#if 1 //some bug with QSB access mask -#define QSB_QPT_SET_MASK 0x0 -#define QSB_QVPT_SET_MASK 0x0 -#define QSB_SET_SCT_MASK 0x0 -#define QSB_SET_SPT_MASK 0x0 -#define QSB_SET_SPT_SBVALID_MASK 0x7FFFFFFF -#else //some bug with QSB access mask -#define QSB_QPT_SET_MASK 0x80000000 -#define QSB_QVPT_SET_MASK 0x0 -#define QSB_SET_SCT_MASK 0xFFFFFFE0 -#define QSB_SET_SPT_MASK 0x7FF8C000 -#define QSB_SET_SPT_SBVALID_MASK 0x7FFFFFFF -#endif //some bug with QSB access mask - -#define QSB_SPT_SBVALID 0x80000000 - -#define QSB_RAMAC_REG_LOW 0x0 -#define QSB_RAMAC_REG_HIGH 0x00010000 - -#define SRC_SRE_ENABLE 0x1000 -#define SRC_CLRR 0x4000 //request clear bit - - - -//SWIE Registers -#define SWIE_IQID_ADDR SWIE_BASE_ADDRESS+0x0c//SWIEInsertQueueDescriptor -#define SWIE_ICMD_ADDR SWIE_BASE_ADDRESS+0x10//SWIEInsertCommand -#define SWIE_ISTAT_ADDR SWIE_BASE_ADDRESS+0x14//SWIEInsertStatus -#define SWIE_ESTAT_ADDR SWIE_BASE_ADDRESS+0x18//SWIEExtractStatus -#define SWIE_ISRC_ADDR SWIE_BASE_ADDRESS+0x74//SWIEInsertServiceRequestControl -#define SWIE_ESRC_ADDR SWIE_BASE_ADDRESS+0x78//SWIEExtractServiceRequestControl -#define SWIE_ICELL_ADDR SWIE_BASE_ADDRESS+0x80//SWIEInsertCell(0x80-0xb4) -#define SWIE_ECELL_ADDR SWIE_BASE_ADDRESS+0xc0//SWIEExtractCell(0xc0-0xf4) - -#define SWIE_ISTAT_DONE 0x1 -#define SWIE_ESTAT_DONE 0x1 -#define SWIE_ICMD_START 0x00000001//Startcommandforinsertion -#define SWIE_CBM_SCE0 CBM_HWEXCMD_SCE0//CBMcommandforSingle-Cell-Extract -#define SWIE_CBM_PID_SUBADDR 0x00001000//CBMPortIDandSubAddressforUTOPIA - -//Extracted cell format -//52bytes AAL0 PDU + "Input cell additional data"(14bits) -#define SWIE_ADDITION_DATA_MASK 0x7fff -#define SWIE_EPORT_MASK 0x7000//Source ID (000 AUB0, 001 AUB1) -#define SWIE_EF4USER_MASK 0x800 -#define SWIE_EF5USER_MASK 0x400 -#define SWIE_EOAM_MASK 0x200 -#define SWIE_EAUU_MASK 0x100 -#define SWIE_EVCI3_MASK 0x80 -#define SWIE_EVCI4_MASK 0x40 -#define SWIE_EVCI6_MASK 0x20 -#define SWIE_EPTI4_MASK 0x10 -#define SWIE_EPTI5_MASK 0x8 -#define SWIE_EPTI6_MASK 0x4 -#define SWIE_EPTI7_MASK 0x2 -#define SWIE_ECRC10ERROR_MASK 0x1 - -#define CBM_CELL_SIZE 0x40 -#define CBM_QD_SIZE 0x10 -#define AAL5R_TRAILER_LEN 12 -#define AAL5S_INBOUND_HEADER 8 - -//constants -//TODO: to be finalized by system guys -//DMA QOS defined by ATM QoS Service type -#define DMA_RX_CH0 0 -#define DMA_RX_CH1 1 -#define DMA_TX_CH0 0 -#define DMA_TX_CH1 1 -#define CBR_DMA_QOS CBM_QD_W3_QOS_0 -#define VBR_RT_DMA_QOS CBM_QD_W3_QOS_0 -#define VBR_NRT_DMA_QOS CBM_QD_W3_QOS_0 -#define UBR_PLUS_DMA_QOS CBM_QD_W3_QOS_0 -#define UBR_DMA_QOS CBM_QD_W3_QOS_0 - -#define SRC_TOS_MIPS 0 -#define AAL5R_SRPN 0x00000006//a5rneedshigherprioritythanDR -#define AAL5S_SRPN 0x00000005 -#define CBM_MIPS_SRPN 0x00000004 -#define QSB_SRPN 0x00000023 -#define HTU_SRPN1 0x00000022 -#define HTU_SRPN0 0x00000021 - -#endif //ATM_DEFINES_H - diff --git a/target/linux/amazon/files/include/asm-mips/amazon/atm_mib.h b/target/linux/amazon/files/include/asm-mips/amazon/atm_mib.h deleted file mode 100644 index f863342580..0000000000 --- a/target/linux/amazon/files/include/asm-mips/amazon/atm_mib.h +++ /dev/null @@ -1,142 +0,0 @@ -#ifndef AMAZON_ATM_MIB_H -#define AMAZON_ATM_MIB_H - -#ifdef CONFIG_IFX_ATM_MIB -#include <asm/types.h> -#ifdef __KERNEL__ -#include <linux/list.h> -#endif -#endif /* CONFIG_IFX_ATM_MIB */ - -#ifndef __KERNEL__ -#include <atmMIB/local_list.h> -typedef unsigned int __u32; -#endif - -typedef struct{ - __u32 ifHCInOctets_h; - __u32 ifHCInOctets_l; - __u32 ifHCOutOctets_h; - __u32 ifHCOutOctets_l; - __u32 ifInErrors; - __u32 ifInUnknownProtos; - __u32 ifOutErrors; -}atm_cell_ifEntry_t; - -typedef struct{ - __u32 ifHCInOctets_h; - __u32 ifHCInOctets_l; - __u32 ifHCOutOctets_h; - __u32 ifHCOutOctets_l; - __u32 ifInUcastPkts; - __u32 ifOutUcastPkts; - __u32 ifInErrors; - __u32 ifInDiscards; - __u32 ifOutErros; - __u32 ifOutDiscards; -}atm_aal5_ifEntry_t; - -typedef struct{ - __u32 aal5VccCrcErrors; - __u32 aal5VccSarTimeOuts;//no timer support yet - __u32 aal5VccOverSizedSDUs; -}atm_aal5_vcc_t; - -#if defined(CONFIG_IFX_ATM_MIB) || defined(IFX_CONFIG_SNMP_ATM_MIB) -/* ATM-MIB data structures */ -typedef struct atmIfConfEntry { - int ifIndex; - int atmInterfaceMaxVpcs; - int atmInterfaceMaxVccs; - int atmInterfaceConfVpcs; - int atmInterfaceConfVccs; - int atmInterfaceMaxActiveVpiBits; - int atmInterfaceMaxActiveVciBits; - int atmInterfaceIlmiVpi; - int atmInterfaceIlmiVci; - int atmInterfaceAddressType; - char atmInterfaceAdminAddress[40]; - unsigned long atmInterfaceMyNeighborIpAddress; - char atmInterfaceMyNeighborIfName[20]; - int atmInterfaceCurrentMaxVpiBits; - int atmInterfaceCurrentMaxVciBits; - char atmInterfaceSubscrAddress[40]; - int flags; -}atmIfConfEntry; - -typedef struct atmTrafficDescParamEntry { - /* Following three parameters are used to update VCC QoS values */ - int ifIndex; - short atmVclvpi; - int atmVclvci; - - unsigned int atmTrafficParamIndex; - unsigned char traffic_class; - int max_pcr; - /* Subramani: Added min_pcr */ - int min_pcr; - int cdv; - int scr; - int mbs; - int atmTrafficRowStatus; - int atmTrafficFrameDiscard; - struct list_head vpivci_head; - struct list_head list; -}atmTrafficDescParamEntry; - - -typedef struct atmVclEntry { - int ifIndex; - short atmVclvpi; - int atmVclvci; - char vpivci[20]; - int atmVclAdminStatus; - int atmVclOperStatus; - unsigned long atmVclLastChange; - struct atmTrafficDescParamEntry *atmVclRxTrafficPtr; - struct atmTrafficDescParamEntry *atmVclTxTrafficPtr; - unsigned char atmVccAalType; - unsigned int atmVccAal5TxSduSize; - unsigned int atmVccAal5RxSduSize; - int atmVccAal5Encap; - int atmVclRowStatus; - int atmVclCastType; - int atmVclConnKind; - struct list_head list; - int flags; -}atmVclEntry; - - -typedef union union_atmptrs { - struct atmIfConfEntry *atmIfConfEntry_ptr; - struct atmTrafficDescParamEntry *atmTrafficDescParamEntry_ptr; - struct atmVclEntry *atmVclEntry_ptr; -}union_atmptrs; - -/* ATM Character device major number */ -#define ATM_MEI_MAJOR 107 - -/* Protocol Constants */ -#define IFX_PROTO_RAW 0 -#define IFX_PROTO_BR2684 1 -#define IFX_PROTO_PPPOATM 2 -#define IFX_PROTO_CLIP 3 - -/* IOCTL Command Set for ATM-MIB */ -#define GET_ATM_IF_CONF_DATA 0x0AB0 -#define SET_ATM_IF_CONF_DATA 0x0AB1 - -#define SET_ATM_QOS_DATA 0x0BC0 - -#define GET_ATM_VCL_DATA 0x0CD0 -#define SET_ATM_VCL_DATA 0x0CD1 - -#define FIND_VCC_IN_KERNEL 0x0DE0 - -/* User defined flags for VCL Table */ -#define ATMVCCAAL5CPCSTRANSMITSDUSIZE 9 -#define ATMVCCAAL5CPCSRECEIVESDUSIZE 10 - -#endif /* CONFIG_IFX_ATM_MIB || IFX_CONFIG_SNMP_ATM_MIB */ - -#endif //AMAZON_ATM_MIB_H diff --git a/target/linux/amazon/files/include/asm-mips/amazon/ifx_peripheral_definitions.h b/target/linux/amazon/files/include/asm-mips/amazon/ifx_peripheral_definitions.h deleted file mode 100644 index 65f14e405f..0000000000 --- a/target/linux/amazon/files/include/asm-mips/amazon/ifx_peripheral_definitions.h +++ /dev/null @@ -1,96 +0,0 @@ -//************************************************************************* -//* Summary of definitions which are used in each peripheral * -//************************************************************************* - -#ifndef peripheral_definitions_h -#define peripheral_definitions_h - -typedef unsigned char UINT8; -typedef signed char INT8; -typedef unsigned short UINT16; -typedef signed short INT16; -typedef unsigned int UINT32; -typedef signed int INT32; -typedef unsigned long long UINT64; -typedef signed long long INT64; - -#define REG8( addr ) (*(volatile UINT8 *) (addr)) -#define REG16( addr ) (*(volatile UINT16 *)(addr)) -#define REG32( addr ) (*(volatile UINT32 *)(addr)) -#define REG64( addr ) (*(volatile UINT64 *)(addr)) - -/* define routine to set FPI access in Supervisor Mode */ -#define IFX_SUPERVISOR_ON() REG32(FB0_CFG) = 0x01 -/* Supervisor mode ends, following functions will be done in User mode */ -#define IFX_SUPERVISOR_OFF() REG32(FB0_CFG) = 0x00 -/* Supervisor mode ends, following functions will be done in User mode */ -#define IFX_SUPERVISOR_MODE() REG32(FB0_CFG) -/* Supervisor mode ends, following functions will be done in User mode */ -#define IFX_SUPERVISOR_SET(svm) REG32(FB0_CFG) = svm -/* enable all Interrupts in IIU */ -//#define IFX_ENABLE_IRQ(irq_mask, im_base) REG32(im_base | IIU_MASK) = irq_mask -///* get all high priority interrupt bits in IIU */ -//#define IFX_GET_IRQ_MASKED(im_base) REG32(im_base | IIU_IRMASKED) -///* signal ends of interrupt to IIU */ -//#define IFX_CLEAR_DIRECT_IRQ(irq_bit, im_base) REG32(im_base | IIU_IR) = irq_bit -///* force IIU interrupt register */ -//#define IFX_FORCE_IIU_REGISTER(data, im_base) REG32(im_base | IIU_IRDEBUG) = data -///* get all bits of interrupt register */ -//#define IFX_GET_IRQ_UNMASKED(im_base) REG32(im_base | IIU_IR) -/* insert a NOP instruction */ -#define NOP _nop() -/* CPU goes to power down mode until interrupt occurs */ -#define IFX_CPU_SLEEP _sleep() -/* enable all interrupts to CPU */ -#define IFX_CPU_ENABLE_ALL_INTERRUPT sys_enable_int() -/* get all low priority interrupt bits in peripheral */ -#define IFX_GET_LOW_PRIO_IRQ(int_reg) REG32(int_reg) -/* clear low priority interrupt bit in peripheral */ -#define IFX_CLEAR_LOW_PRIO_IRQ(irq_bit, int_reg) REG32(int_reg) = irq_bit -/* write FPI bus */ -#define WRITE_FPI_BYTE(data, addr) REG8(addr) = data -#define WRITE_FPI_16BIT(data, addr) REG16(addr) = data -#define WRITE_FPI_32BIT(data, addr) REG32(addr) = data -/* read FPI bus */ -#define READ_FPI_BYTE(addr) REG8(addr) -#define READ_FPI_16BIT(addr) REG16(addr) -#define READ_FPI_32BIT(addr) REG32(addr) -/* write peripheral register */ -#define WRITE_PERIPHERAL_REGISTER(data, addr) REG32(addr) = data - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr) = data -#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr) = data -#else //not CONFIG_CPU_LITTLE_ENDIAN -#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr+2) = data -#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr+3) = data -#endif //CONFIG_CPU_LITTLE_ENDIAN - -/* read peripheral register */ -#define READ_PERIPHERAL_REGISTER(addr) REG32(addr) - -/* read/modify(or)/write peripheral register */ -#define RMW_OR_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) | data -/* read/modify(and)/write peripheral register */ -#define RMW_AND_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) & (UINT32)data - -/* CPU-independent mnemonic constants */ -/* CLC register bits */ -#define IFX_CLC_ENABLE 0x00000000 -#define IFX_CLC_DISABLE 0x00000001 -#define IFX_CLC_DISABLE_STATUS 0x00000002 -#define IFX_CLC_SUSPEND_ENABLE 0x00000004 -#define IFX_CLC_CLOCK_OFF_DISABLE 0x00000008 -#define IFX_CLC_OVERWRITE_SPEN_FSOE 0x00000010 -#define IFX_CLC_FAST_CLOCK_SWITCH_OFF 0x00000020 -#define IFX_CLC_RUN_DIVIDER_MASK 0x0000FF00 -#define IFX_CLC_RUN_DIVIDER_OFFSET 8 -#define IFX_CLC_SLEEP_DIVIDER_MASK 0x00FF0000 -#define IFX_CLC_SLEEP_DIVIDER_OFFSET 16 -#define IFX_CLC_SPECIFIC_DIVIDER_MASK 0x00FF0000 -#define IFX_CLC_SPECIFIC_DIVIDER_OFFSET 24 - -/* number of cycles to wait for interrupt service routine to be called */ -#define WAIT_CYCLES 50 - -#endif /* PERIPHERAL_DEFINITIONS_H not yet defined */ diff --git a/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc.h b/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc.h deleted file mode 100644 index e5d73ad4ec..0000000000 --- a/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc.h +++ /dev/null @@ -1,263 +0,0 @@ -/* - * ifx_ssc.h defines some data sructures used in ifx_ssc.c - * - * Copyright (C) 2004 Michael Schoenenborn (IFX COM TI BT) - * - * - */ - -#ifndef __IFX_SSC_H -#define __IFX_SSC_H -#ifdef __KERNEL__ -#include <asm/amazon/ifx_ssc_defines.h> -#endif //__KERNEL__ - -#define PORT_CNT 1 // assume default value - -/* symbolic constants to be used in SSC routines */ - -// ### TO DO: bad performance -#define IFX_SSC_TXFIFO_ITL 1 -#define IFX_SSC_RXFIFO_ITL 1 - - - -struct ifx_ssc_statistics{ - unsigned int abortErr; /* abort error */ - unsigned int modeErr; /* master/slave mode error */ - unsigned int txOvErr; /* TX Overflow error */ - unsigned int txUnErr; /* TX Underrun error */ - unsigned int rxOvErr; /* RX Overflow error */ - unsigned int rxUnErr; /* RX Underrun error */ - unsigned int rxBytes; - unsigned int txBytes; -}; - - -struct ifx_ssc_hwopts { - unsigned int AbortErrDetect :1; /* Abort Error detection (in slave mode) */ - unsigned int rxOvErrDetect :1; /* Receive Overflow Error detection */ - unsigned int rxUndErrDetect :1; /* Receive Underflow Error detection */ - unsigned int txOvErrDetect :1; /* Transmit Overflow Error detection */ - unsigned int txUndErrDetect :1; /* Transmit Underflow Error detection */ - unsigned int echoMode :1; /* Echo mode */ - unsigned int loopBack :1; /* Loopback mode */ - unsigned int idleValue :1; /* Idle value */ - unsigned int clockPolarity :1; /* Idle clock is high or low */ - unsigned int clockPhase :1; /* Tx on trailing or leading edge*/ - unsigned int headingControl :1; /* LSB first or MSB first */ - unsigned int dataWidth :6; /* from 2 up to 32 bits */ - unsigned int masterSelect :1; /* Master or Slave mode */ - unsigned int modeRxTx :2; /* rx/tx mode */ - unsigned int gpoCs :8; /* choose outputs to use for chip select */ - unsigned int gpoInv :8; /* invert GPO outputs */ -}; - - -struct ifx_ssc_frm_opts { - bool FrameEnable; // SFCON.SFEN - unsigned int DataLength; // SFCON.DLEN - unsigned int PauseLength; // SFCON.PLEN - unsigned int IdleData; // SFCON.IDAT - unsigned int IdleClock; // SFCON.ICLK - bool StopAfterPause; // SFCON.STOP -}; - -struct ifx_ssc_frm_status { - bool DataBusy; // SFSTAT.DBSY - bool PauseBusy; // SFSTAT.PBSY - unsigned int DataCount; // SFSTAT.DCNT - unsigned int PauseCount; // SFSTAT.PCNT - bool EnIntAfterData; // SFCON.IBEN - bool EnIntAfterPause;// SFCON.IAEN -}; - -typedef struct { - char *buf; - size_t len; -} ifx_ssc_buf_item_t; - - -// data structures for batch execution -typedef union { - struct { - bool save_options; - } init; - ifx_ssc_buf_item_t read; - ifx_ssc_buf_item_t write; - ifx_ssc_buf_item_t rd_wr; - unsigned int set_baudrate; - struct ifx_ssc_frm_opts set_frm; - unsigned int set_gpo; - struct ifx_ssc_hwopts set_hwopts; -}ifx_ssc_batch_cmd_param; - -struct ifx_ssc_batch_list { - unsigned int cmd; - ifx_ssc_batch_cmd_param cmd_param; - struct ifx_ssc_batch_list *next; -}; - -#ifdef __KERNEL__ -#define IFX_SSC_IS_MASTER(p) ((p)->opts.masterSelect == SSC_MASTER_MODE) - - -struct ifx_ssc_port{ - unsigned long mapbase; - struct ifx_ssc_hwopts opts; - struct ifx_ssc_statistics stats; - struct ifx_ssc_frm_status frm_status; - struct ifx_ssc_frm_opts frm_opts; - /* wait queue for ifx_ssc_read() */ - wait_queue_head_t rwait, pwait; - int port_nr; - char port_is_open; /* exclusive open - boolean */ -// int no_of_bits; /* number of _valid_ bits */ -// int elem_size; /* shift for element (no of bytes)*/ - /* buffer and pointers to the read/write position */ - char *rxbuf; /* buffer for RX */ - char *rxbuf_end; /* buffer end pointer for RX */ - volatile char *rxbuf_ptr; /* buffer write pointer for RX */ - char *txbuf; /* buffer for TX */ - char *txbuf_end; /* buffer end pointer for TX */ - volatile char *txbuf_ptr; /* buffer read pointer for TX */ - unsigned int baud; - /* each channel has its own interrupts */ - /* (transmit/receive/error/frame) */ - unsigned int txirq, rxirq, errirq, frmirq; -}; -/* default values for SSC configuration */ -// values of CON -#define IFX_SSC_DEF_IDLE_DATA 1 /* enable */ -#define IFX_SSC_DEF_BYTE_VALID_CTL 1 /* enable */ -#define IFX_SSC_DEF_DATA_WIDTH 32 /* bits */ -#define IFX_SSC_DEF_ABRT_ERR_DETECT 0 /* disable */ -#define IFX_SSC_DEF_RO_ERR_DETECT 1 /* enable */ -#define IFX_SSC_DEF_RU_ERR_DETECT 0 /* disable */ -#define IFX_SSC_DEF_TO_ERR_DETECT 0 /* disable */ -#define IFX_SSC_DEF_TU_ERR_DETECT 0 /* disable */ -#define IFX_SSC_DEF_LOOP_BACK 0 /* disable */ -#define IFX_SSC_DEF_ECHO_MODE 0 /* disable */ -#define IFX_SSC_DEF_CLOCK_POLARITY 0 /* low */ -#define IFX_SSC_DEF_CLOCK_PHASE 1 /* 0: shift on leading edge, latch on trailling edge, 1, otherwise */ -#define IFX_SSC_DEF_HEADING_CONTROL IFX_SSC_MSB_FIRST -#define IFX_SSC_DEF_MODE_RXTX IFX_SSC_MODE_RXTX -// other values -#define IFX_SSC_DEF_MASTERSLAVE IFX_SSC_MASTER_MODE /* master */ -#define IFX_SSC_DEF_BAUDRATE 1000000 -#define IFX_SSC_DEF_RMC 0x10 - -#define IFX_SSC_DEF_TXFIFO_FL 8 -#define IFX_SSC_DEF_RXFIFO_FL 1 - -#if 1 //TODO -#define IFX_SSC_DEF_GPO_CS 2 /* no chip select */ -#define IFX_SSC_DEF_GPO_INV 0 /* no chip select */ -#else -#error "what is ur Chip Select???" -#endif -#define IFX_SSC_DEF_SFCON 0 /* no serial framing */ -#if 0 -#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\ - IFX_SSC_R_BIT | IFX_SSC_E_BIT | IFX_SSC_F_BIT -#endif -#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\ - IFX_SSC_R_BIT | IFX_SSC_E_BIT -#endif /* __KERNEL__ */ - -// batch execution commands -#define IFX_SSC_BATCH_CMD_INIT 1 -#define IFX_SSC_BATCH_CMD_READ 2 -#define IFX_SSC_BATCH_CMD_WRITE 3 -#define IFX_SSC_BATCH_CMD_RD_WR 4 -#define IFX_SSC_BATCH_CMD_SET_BAUDRATE 5 -#define IFX_SSC_BATCH_CMD_SET_HWOPTS 6 -#define IFX_SSC_BATCH_CMD_SET_FRM 7 -#define IFX_SSC_BATCH_CMD_SET_GPO 8 -#define IFX_SSC_BATCH_CMD_FIFO_FLUSH 9 -//#define IFX_SSC_BATCH_CMD_ -//#define IFX_SSC_BATCH_CMD_ -#define IFX_SSC_BATCH_CMD_END_EXEC 0 - -/* Macros to configure SSC hardware */ -/* headingControl: */ -#define IFX_SSC_LSB_FIRST 0 -#define IFX_SSC_MSB_FIRST 1 -/* dataWidth: */ -#define IFX_SSC_MIN_DATA_WIDTH 2 -#define IFX_SSC_MAX_DATA_WIDTH 32 -/* master/slave mode select */ -#define IFX_SSC_MASTER_MODE 1 -#define IFX_SSC_SLAVE_MODE 0 -/* rx/tx mode */ -// ### TO DO: !!! ATTENTION! Hardware dependency => move to ifx_ssc_defines.h -#define IFX_SSC_MODE_RXTX 0 -#define IFX_SSC_MODE_RX 1 -#define IFX_SSC_MODE_TX 2 -#define IFX_SSC_MODE_OFF 3 -#define IFX_SSC_MODE_MASK IFX_SSC_MODE_RX | IFX_SSC_MODE_TX - -/* GPO values */ -#define IFX_SSC_MAX_GPO_OUT 7 - -#define IFX_SSC_RXREQ_BLOCK_SIZE 32768 - -/***********************/ -/* defines for ioctl's */ -/***********************/ -#define IFX_SSC_IOCTL_MAGIC 'S' -/* read out the statistics */ -#define IFX_SSC_STATS_READ _IOR(IFX_SSC_IOCTL_MAGIC, 1, struct ifx_ssc_statistics) -/* clear the statistics */ -#define IFX_SSC_STATS_RESET _IO(IFX_SSC_IOCTL_MAGIC, 2) -/* set the baudrate */ -#define IFX_SSC_BAUD_SET _IOW(IFX_SSC_IOCTL_MAGIC, 3, unsigned int) -/* get the current baudrate */ -#define IFX_SSC_BAUD_GET _IOR(IFX_SSC_IOCTL_MAGIC, 4, unsigned int) -/* set hardware options */ -#define IFX_SSC_HWOPTS_SET _IOW(IFX_SSC_IOCTL_MAGIC, 5, struct ifx_ssc_hwopts) -/* get the current hardware options */ -#define IFX_SSC_HWOPTS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 6, struct ifx_ssc_hwopts) -/* set transmission mode */ -#define IFX_SSC_RXTX_MODE_SET _IOW(IFX_SSC_IOCTL_MAGIC, 7, unsigned int) -/* get the current transmission mode */ -#define IFX_SSC_RXTX_MODE_GET _IOR(IFX_SSC_IOCTL_MAGIC, 8, unsigned int) -/* abort transmission */ -#define IFX_SSC_ABORT _IO(IFX_SSC_IOCTL_MAGIC, 9) -#define IFX_SSC_FIFO_FLUSH _IO(IFX_SSC_IOCTL_MAGIC, 9) - -/* set general purpose outputs */ -#define IFX_SSC_GPO_OUT_SET _IOW(IFX_SSC_IOCTL_MAGIC, 32, unsigned int) -/* clear general purpose outputs */ -#define IFX_SSC_GPO_OUT_CLR _IOW(IFX_SSC_IOCTL_MAGIC, 33, unsigned int) -/* get general purpose outputs */ -#define IFX_SSC_GPO_OUT_GET _IOR(IFX_SSC_IOCTL_MAGIC, 34, unsigned int) - -/*** serial framing ***/ -/* get status of serial framing */ -#define IFX_SSC_FRM_STATUS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 48, struct ifx_ssc_frm_status) -/* get counter reload values and control bits */ -#define IFX_SSC_FRM_CONTROL_GET _IOR(IFX_SSC_IOCTL_MAGIC, 49, struct ifx_ssc_frm_opts) -/* set counter reload values and control bits */ -#define IFX_SSC_FRM_CONTROL_SET _IOW(IFX_SSC_IOCTL_MAGIC, 50, struct ifx_ssc_frm_opts) - - -/*** batch execution ***/ -/* do batch execution */ -#define IFX_SSC_BATCH_EXEC _IOW(IFX_SSC_IOCTL_MAGIC, 64, struct ifx_ssc_batch_list) - - -#ifdef __KERNEL__ -// routines from ifx_ssc.c -// ### TO DO -/* kernel interface for read and write */ -ssize_t ifx_ssc_kread(int, char *, size_t); -ssize_t ifx_ssc_kwrite(int, const char *, size_t); - -#ifdef CONFIG_IFX_VP_KERNEL_TEST -void ifx_ssc_tc(void); -#endif // CONFIG_IFX_VP_KERNEL_TEST - -#endif //__KERNEL__ -#endif // __IFX_SSC_H - diff --git a/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc_defines.h b/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc_defines.h deleted file mode 100644 index 46157dcbd6..0000000000 --- a/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc_defines.h +++ /dev/null @@ -1,552 +0,0 @@ -#ifndef IFX_SSC_DEFINES_H -#define IFX_SSC_DEFINES_H - -#include "ifx_peripheral_definitions.h" - -/* maximum SSC FIFO size */ -#define IFX_SSC_MAX_FIFO_SIZE 32 - -/* register map of SSC */ - -/* address of the Clock Control Register of the SSC */ -#define IFX_SSC_CLC 0x00000000 -/* IFX_SSC_CLC register is significant in bits 23 downto 8 and in bits 5, 3, 2, 0 - bit 1 is hardware modified*/ -#define IFX_SSC_CLC_readmask 0x00FFFFEF -#define IFX_SSC_CLC_writemask 0x00FFFF3D -#define IFX_SSC_CLC_hwmask 0x00000002 -#define IFX_SSC_CLC_dontcare (IFX_SSC_CLC_readmask & IFX_SSC_CLC_writemask & ~IFX_SSC_CLC_hwmask) - -/* address of Port Input Select Register of the SSC */ -#define IFX_SSC_PISEL 0x00000004 -/* IFX_SSC_PISEL register is significant in lowest three bits only */ -#define IFX_SSC_PISEL_readmask 0x00000007 -#define IFX_SSC_PISEL_writemask 0x00000007 -#define IFX_SSC_PISEL_hwmask 0x00000000 -#define IFX_SSC_PISEL_dontcare (IFX_SSC_PISEL_readmask & IFX_SSC_PISEL_writemask & ~IFX_SSC_PISEL_hwmask) - -/* address of Identification Register of the SSC */ -#define IFX_SSC_ID 0x00000008 -/* IFX_SSC_ID register is significant in no bit */ -#define IFX_SSC_ID_readmask 0x0000FF3F -#define IFX_SSC_ID_writemask 0x00000000 -#define IFX_SSC_ID_hwmask 0x00000000 -#define IFX_SSC_ID_dontcare (IFX_SSC_ID_readmask & IFX_SSC_ID_writemask & ~IFX_SSC_ID_hwmask) - -/* address of the Control Register of the SSC */ -#define IFX_SSC_CON 0x00000010 -/* IFX_SSC_CON register is significant in bits 23:22, 20:16 and 12:0 */ -#define IFX_SSC_CON_readmask 0x01DF1FFF -#define IFX_SSC_CON_writemask 0x01DF1FFF -#define IFX_SSC_CON_hwmask 0x00000000 -#define IFX_SSC_CON_dontcare (IFX_SSC_CON_readmask & IFX_SSC_CON_writemask & ~IFX_SSC_CON_hwmask) - - -/* address of the Status Register of the SSC */ -#define IFX_SSC_STATE 0x00000014 -/* IFX_SSC_STATE register is readable in bits 30:28, 26:24, 20:16, 12:7 and 2:0 - all bits except 1:0 are hardware modified */ -#define IFX_SSC_STATE_readmask 0x771F3F87 -#define IFX_SSC_STATE_writemask 0x00000000 -#define IFX_SSC_STATE_hwmask 0x771F3F84 -#define IFX_SSC_STATE_dontcare (IFX_SSC_STATE_readmask & IFX_SSC_STATE_writemask & ~IFX_SSC_STATE_hwmask) - -/* address of the Write Hardware Modified Control Register Bits of the SSC */ -#define IFX_SSC_WHBSTATE 0x00000018 -/* IFX_SSC_WHBSTATE register is write only */ -#define IFX_SSC_WHBSTATE_readmask 0x00000000 -#define IFX_SSC_WHBSTATE_writemask 0x0000FFFF -#define IFX_SSC_WHBSTATE_hwmask 0x00000000 -#define IFX_SSC_WHBSTATE_dontcare (IFX_SSC_WHBSTATE_readmask & IFX_SSC_WHBSTATE_writemask & ~IFX_SSC_WHBSTATE_hwmask) - -/* address of the Baudrate Timer Reload Register of the SSC */ -#define IFX_SSC_BR 0x00000040 -/* IFX_SSC_BR register is significant in bit 15 downto 0*/ -#define IFX_SSC_BR_readmask 0x0000FFFF -#define IFX_SSC_BR_writemask 0x0000FFFF -#define IFX_SSC_BR_hwmask 0x00000000 -#define IFX_SSC_BR_dontcare (IFX_SSC_BR_readmask & IFX_SSC_BR_writemask & ~IFX_SSC_BR_hwmask) - -/* address of the Baudrate Timer Status Register of the SSC */ -#define IFX_SSC_BRSTAT 0x00000044 -/* IFX_SSC_BRSTAT register is significant in bit 15 downto 0*/ -#define IFX_SSC_BRSTAT_readmask 0x0000FFFF -#define IFX_SSC_BRSTAT_writemask 0x00000000 -#define IFX_SSC_BRSTAT_hwmask 0x0000FFFF -#define IFX_SSC_BRSTAT_dontcare (IFX_SSC_BRSTAT_readmask & IFX_SSC_BRSTAT_writemask & ~IFX_SSC_BRSTAT_hwmask) - -/* address of the Transmitter Buffer Register of the SSC */ -#define IFX_SSC_TB 0x00000020 -/* IFX_SSC_TB register is significant in bit 31 downto 0*/ -#define IFX_SSC_TB_readmask 0xFFFFFFFF -#define IFX_SSC_TB_writemask 0xFFFFFFFF -#define IFX_SSC_TB_hwmask 0x00000000 -#define IFX_SSC_TB_dontcare (IFX_SSC_TB_readmask & IFX_SSC_TB_writemask & ~IFX_SSC_TB_hwmask) - -/* address of the Reciver Buffer Register of the SSC */ -#define IFX_SSC_RB 0x00000024 -/* IFX_SSC_RB register is significant in no bits*/ -#define IFX_SSC_RB_readmask 0xFFFFFFFF -#define IFX_SSC_RB_writemask 0x00000000 -#define IFX_SSC_RB_hwmask 0xFFFFFFFF -#define IFX_SSC_RB_dontcare (IFX_SSC_RB_readmask & IFX_SSC_RB_writemask & ~IFX_SSC_RB_hwmask) - -/* address of the Receive FIFO Control Register of the SSC */ -#define IFX_SSC_RXFCON 0x00000030 -/* IFX_SSC_RXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */ -#define IFX_SSC_RXFCON_readmask 0x00003F03 -#define IFX_SSC_RXFCON_writemask 0x00003F03 -#define IFX_SSC_RXFCON_hwmask 0x00000000 -#define IFX_SSC_RXFCON_dontcare (IFX_SSC_RXFCON_readmask & IFX_SSC_RXFCON_writemask & ~IFX_SSC_RXFCON_hwmask) - -/* address of the Transmit FIFO Control Register of the SSC */ -#define IFX_SSC_TXFCON 0x00000034 -/* IFX_SSC_TXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */ -#define IFX_SSC_TXFCON_readmask 0x00003F03 -#define IFX_SSC_TXFCON_writemask 0x00003F03 -#define IFX_SSC_TXFCON_hwmask 0x00000000 -#define IFX_SSC_TXFCON_dontcare (IFX_SSC_TXFCON_readmask & IFX_SSC_TXFCON_writemask & ~IFX_SSC_TXFCON_hwmask) - -/* address of the FIFO Status Register of the SSC */ -#define IFX_SSC_FSTAT 0x00000038 -/* IFX_SSC_FSTAT register is significant in no bit*/ -#define IFX_SSC_FSTAT_readmask 0x00003F3F -#define IFX_SSC_FSTAT_writemask 0x00000000 -#define IFX_SSC_FSTAT_hwmask 0x00003F3F -#define IFX_SSC_FSTAT_dontcare (IFX_SSC_FSTAT_readmask & IFX_SSC_FSTAT_writemask & ~IFX_SSC_FSTAT_hwmask) - -/* address of the Data Frame Control register of the SSC */ -#define IFX_SSC_SFCON 0x00000060 -#define IFX_SSC_SFCON_readmask 0xFFDFFFFD -#define IFX_SSC_SFCON_writemask 0xFFDFFFFD -#define IFX_SSC_SFCON_hwmask 0x00000000 -#define IFX_SSC_SFCON_dontcare (IFX_SSC_SFCON_readmask & IFX_SSC_SFCON_writemask & ~IFX_SSC_SFCON_hwmask) - -/* address of the Data Frame Status register of the SSC */ -#define IFX_SSC_SFSTAT 0x00000064 -#define IFX_SSC_SFSTAT_readmask 0xFFC0FFF3 -#define IFX_SSC_SFSTAT_writemask 0x00000000 -#define IFX_SSC_SFSTAT_hwmask 0xFFC0FFF3 -#define IFX_SSC_SFSTAT_dontcare (IFX_SSC_SFSTAT_readmask & IFX_SSC_SFSTAT_writemask & ~IFX_SSC_SFSTAT_hwmask) - -/* address of the General Purpose Output Control register of the SSC */ -#define IFX_SSC_GPOCON 0x00000070 -#define IFX_SSC_GPOCON_readmask 0x0000FFFF -#define IFX_SSC_GPOCON_writemask 0x0000FFFF -#define IFX_SSC_GPOCON_hwmask 0x00000000 -#define IFX_SSC_GPOCON_dontcare (IFX_SSC_GPOCON_readmask & IFX_SSC_GPOCON_writemask & ~IFX_SSC_GPOCON_hwmask) - -/* address of the General Purpose Output Status register of the SSC */ -#define IFX_SSC_GPOSTAT 0x00000074 -#define IFX_SSC_GPOSTAT_readmask 0x000000FF -#define IFX_SSC_GPOSTAT_writemask 0x00000000 -#define IFX_SSC_GPOSTAT_hwmask 0x00000000 -#define IFX_SSC_GPOSTAT_dontcare (IFX_SSC_GPOSTAT_readmask & IFX_SSC_GPOSTAT_writemask & ~IFX_SSC_GPOSTAT_hwmask) - -/* address of the Force GPO Status register of the SSC */ -#define IFX_SSC_WHBGPOSTAT 0x00000078 -#define IFX_SSC_WHBGPOSTAT_readmask 0x00000000 -#define IFX_SSC_WHBGPOSTAT_writemask 0x0000FFFF -#define IFX_SSC_WHBGPOSTAT_hwmask 0x00000000 -#define IFX_SSC_WHBGPOSTAT_dontcare (IFX_SSC_WHBGPOSTAT_readmask & IFX_SSC_WHBGPOSTAT_writemask & ~IFX_SSC_WHBGPOSTAT_hwmask) - -/* address of the Receive Request Register of the SSC */ -#define IFX_SSC_RXREQ 0x00000080 -#define IFX_SSC_RXREQ_readmask 0x0000FFFF -#define IFX_SSC_RXREQ_writemask 0x0000FFFF -#define IFX_SSC_RXREQ_hwmask 0x00000000 -#define IFX_SSC_RXREQ_dontcare (IFX_SSC_RXREQ_readmask & IFX_SSC_RXREQ_writemask & ~IFX_SSC_RXREQ_hwmask) - -/* address of the Receive Count Register of the SSC */ -#define IFX_SSC_RXCNT 0x00000084 -#define IFX_SSC_RXCNT_readmask 0x0000FFFF -#define IFX_SSC_RXCNT_writemask 0x00000000 -#define IFX_SSC_RXCNT_hwmask 0x0000FFFF -#define IFX_SSC_RXCNT_dontcare (IFX_SSC_RXCNT_readmask & IFX_SSC_RXCNT_writemask & ~IFX_SSC_RXCNT_hwmask) - -/* address of the DMA Configuration Register of the SSC */ -#define IFX_SSC_DMACON 0x000000EC -#define IFX_SSC_DMACON_readmask 0x0000FFFF -#define IFX_SSC_DMACON_writemask 0x00000000 -#define IFX_SSC_DMACON_hwmask 0x0000FFFF -#define IFX_SSC_DMACON_dontcare (IFX_SSC_DMACON_readmask & IFX_SSC_DMACON_writemask & ~IFX_SSC_DMACON_hwmask) - -//------------------------------------------------------ -// interrupt register for enabling interrupts, mask register of irq_reg -#define IFX_SSC_IRN_EN 0xF4 -// read/write -#define IFX_SSC_IRN_EN_readmask 0x0000000F -#define IFX_SSC_IRN_EN_writemask 0x0000000F -#define IFX_SSC_IRN_EN_hwmask 0x00000000 -#define IFX_SSC_IRN_EN_dontcare (IFX_SSC_IRN_EN_readmask & IFX_SSC_IRN_EN_writemask & ~IFX_SSC_IRN_EN_hwmask) - -// interrupt register for accessing interrupts -#define IFX_SSC_IRN_CR 0xF8 -// read/write -#define IFX_SSC_IRN_CR_readmask 0x0000000F -#define IFX_SSC_IRN_CR_writemask 0x0000000F -#define IFX_SSC_IRN_CR_hwmask 0x0000000F -#define IFX_SSC_IRN_CR_dontcare (IFX_SSC_IRN_CR_readmask & IFX_SSC_IRN_CR_writemask & ~IFX_SSC_IRN_CR_hwmask) - -// interrupt register for stimulating interrupts -#define IFX_SSC_IRN_ICR 0xFC -// read/write -#define IFX_SSC_IRN_ICR_readmask 0x0000000F -#define IFX_SSC_IRN_ICR_writemask 0x0000000F -#define IFX_SSC_IRN_ICR_hwmask 0x00000000 -#define IFX_SSC_IRN_ICR_dontcare (IFX_SSC_IRN_ICR_readmask & IFX_SSC_IRN_ICR_writemask & ~IFX_SSC_IRN_ICR_hwmask) - -//--------------------------------------------------------------------- -// Number of IRQs and bitposition of IRQ -#define IFX_SSC_NUM_IRQ 4 -#define IFX_SSC_T_BIT 0x00000001 -#define IFX_SSC_R_BIT 0x00000002 -#define IFX_SSC_E_BIT 0x00000004 -#define IFX_SSC_F_BIT 0x00000008 - -/* bit masks for SSC registers */ - -/* ID register */ -#define IFX_SSC_PERID_REV_MASK 0x0000001F -#define IFX_SSC_PERID_CFG_MASK 0x00000020 -#define IFX_SSC_PERID_ID_MASK 0x0000FF00 -#define IFX_SSC_PERID_REV_OFFSET 0 -#define IFX_SSC_PERID_CFG_OFFSET 5 -#define IFX_SSC_PERID_ID_OFFSET 8 -#define IFX_SSC_PERID_ID 0x45 -#define IFX_SSC_PERID_DMA_ON 0x00000020 -#define IFX_SSC_PERID_RXFS_MASK 0x003F0000 -#define IFX_SSC_PERID_RXFS_OFFSET 16 -#define IFX_SSC_PERID_TXFS_MASK 0x3F000000 -#define IFX_SSC_PERID_TXFS_OFFSET 24 - -/* PISEL register */ -#define IFX_SSC_PISEL_MASTER_IN_A 0x0000 -#define IFX_SSC_PISEL_MASTER_IN_B 0x0001 -#define IFX_SSC_PISEL_SLAVE_IN_A 0x0000 -#define IFX_SSC_PISEL_SLAVE_IN_B 0x0002 -#define IFX_SSC_PISEL_CLOCK_IN_A 0x0000 -#define IFX_SSC_PISEL_CLOCK_IN_B 0x0004 - - -/* IFX_SSC_CON register */ -#define IFX_SSC_CON_ECHO_MODE_ON 0x01000000 -#define IFX_SSC_CON_ECHO_MODE_OFF 0x00000000 -#define IFX_SSC_CON_IDLE_HIGH 0x00800000 -#define IFX_SSC_CON_IDLE_LOW 0x00000000 -#define IFX_SSC_CON_ENABLE_BYTE_VALID 0x00400000 -#define IFX_SSC_CON_DISABLE_BYTE_VALID 0x00000000 -#define IFX_SSC_CON_DATA_WIDTH_OFFSET 16 -#define IFX_SSC_CON_DATA_WIDTH_MASK 0x001F0000 -#define IFX_SSC_ENCODE_DATA_WIDTH(width) (((width - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET) & IFX_SSC_CON_DATA_WIDTH_MASK) - -#define IFX_SSC_CON_RESET_ON_BAUDERR 0x00002000 -#define IFX_SSC_CON_GO_ON_ON_BAUDERR 0x00000000 - -#define IFX_SSC_CON_RX_UFL_CHECK 0x00001000 -#define IFX_SSC_CON_RX_UFL_IGNORE 0x00000000 -#define IFX_SSC_CON_TX_UFL_CHECK 0x00000800 -#define IFX_SSC_CON_TX_UFL_IGNORE 0x00000000 -#define IFX_SSC_CON_ABORT_ERR_CHECK 0x00000400 -#define IFX_SSC_CON_ABORT_ERR_IGNORE 0x00000000 -#define IFX_SSC_CON_RX_OFL_CHECK 0x00000200 -#define IFX_SSC_CON_RX_OFL_IGNORE 0x00000000 -#define IFX_SSC_CON_TX_OFL_CHECK 0x00000100 -#define IFX_SSC_CON_TX_OFL_IGNORE 0x00000000 -#define IFX_SSC_CON_ALL_ERR_CHECK 0x00001F00 -#define IFX_SSC_CON_ALL_ERR_IGNORE 0x00000000 - -#define IFX_SSC_CON_LOOPBACK_MODE 0x00000080 -#define IFX_SSC_CON_NO_LOOPBACK 0x00000000 -#define IFX_SSC_CON_HALF_DUPLEX 0x00000080 -#define IFX_SSC_CON_FULL_DUPLEX 0x00000000 -#define IFX_SSC_CON_CLOCK_FALL 0x00000040 -#define IFX_SSC_CON_CLOCK_RISE 0x00000000 -#define IFX_SSC_CON_SHIFT_THEN_LATCH 0x00000000 -#define IFX_SSC_CON_LATCH_THEN_SHIFT 0x00000020 -#define IFX_SSC_CON_MSB_FIRST 0x00000010 -#define IFX_SSC_CON_LSB_FIRST 0x00000000 -#define IFX_SSC_CON_ENABLE_CSB 0x00000008 -#define IFX_SSC_CON_DISABLE_CSB 0x00000000 -#define IFX_SSC_CON_INVERT_CSB 0x00000004 -#define IFX_SSC_CON_TRUE_CSB 0x00000000 -#define IFX_SSC_CON_RX_OFF 0x00000002 -#define IFX_SSC_CON_RX_ON 0x00000000 -#define IFX_SSC_CON_TX_OFF 0x00000001 -#define IFX_SSC_CON_TX_ON 0x00000000 - - -/* IFX_SSC_STATE register */ -#define IFX_SSC_STATE_RX_BYTE_VALID_OFFSET 28 -#define IFX_SSC_STATE_RX_BYTE_VALID_MASK 0x70000000 -#define IFX_SSC_DECODE_RX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> IFX_SSC_STATE_RX_BYTE_VALID_OFFSET) -#define IFX_SSC_STATE_TX_BYTE_VALID_OFFSET 24 -#define IFX_SSC_STATE_TX_BYTE_VALID_MASK 0x07000000 -#define IFX_SSC_DECODE_TX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_TX_BYTE_VALID_MASK) >> IFX_SSC_STATE_TX_BYTE_VALID_OFFSET) -#define IFX_SSC_STATE_BIT_COUNT_OFFSET 16 -#define IFX_SSC_STATE_BIT_COUNT_MASK 0x001F0000 -#define IFX_SSC_DECODE_DATA_WIDTH(con_state) (((con_state & IFX_SSC_STATE_BIT_COUNT_MASK) >> IFX_SSC_STATE_BIT_COUNT_OFFSET) + 1) -#define IFX_SSC_STATE_BUSY 0x00002000 -#define IFX_SSC_STATE_RX_UFL 0x00001000 -#define IFX_SSC_STATE_TX_UFL 0x00000800 -#define IFX_SSC_STATE_ABORT_ERR 0x00000400 -#define IFX_SSC_STATE_RX_OFL 0x00000200 -#define IFX_SSC_STATE_TX_OFL 0x00000100 -#define IFX_SSC_STATE_MODE_ERR 0x00000080 -#define IFX_SSC_STATE_SLAVE_IS_SELECTED 0x00000004 -#define IFX_SSC_STATE_IS_MASTER 0x00000002 -#define IFX_SSC_STATE_IS_ENABLED 0x00000001 - -/* WHBSTATE register */ -#define IFX_SSC_WHBSTATE_DISABLE_SSC 0x0001 -#define IFX_SSC_WHBSTATE_CONFIGURATION_MODE 0x0001 -#define IFX_SSC_WHBSTATE_CLR_ENABLE 0x0001 - -#define IFX_SSC_WHBSTATE_ENABLE_SSC 0x0002 -#define IFX_SSC_WHBSTATE_RUN_MODE 0x0002 -#define IFX_SSC_WHBSTATE_SET_ENABLE 0x0002 - -#define IFX_SSC_WHBSTATE_SLAVE_MODE 0x0004 -#define IFX_SSC_WHBSTATE_CLR_MASTER_SELECT 0x0004 - -#define IFX_SSC_WHBSTATE_MASTER_MODE 0x0008 -#define IFX_SSC_WHBSTATE_SET_MASTER_SELECT 0x0008 - -#define IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR 0x0010 -#define IFX_SSC_WHBSTATE_SET_RX_UFL_ERROR 0x0020 - -#define IFX_SSC_WHBSTATE_CLR_MODE_ERROR 0x0040 -#define IFX_SSC_WHBSTATE_SET_MODE_ERROR 0x0080 - -#define IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR 0x0100 -#define IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR 0x0200 -#define IFX_SSC_WHBSTATE_CLR_ABORT_ERROR 0x0400 -#define IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR 0x0800 -#define IFX_SSC_WHBSTATE_SET_TX_OFL_ERROR 0x1000 -#define IFX_SSC_WHBSTATE_SET_RX_OFL_ERROR 0x2000 -#define IFX_SSC_WHBSTATE_SET_ABORT_ERROR 0x4000 -#define IFX_SSC_WHBSTATE_SET_TX_UFL_ERROR 0x8000 -#define IFX_SSC_WHBSTATE_CLR_ALL_ERROR 0x0F50 -#define IFX_SSC_WHBSTATE_SET_ALL_ERROR 0xF0A0 - -/* BR register */ -#define IFX_SSC_BR_BAUDRATE_OFFSET 0 -#define IFX_SSC_BR_BAUDRATE_MASK 0xFFFF - -/* BR_STAT register */ -#define IFX_SSC_BRSTAT_BAUDTIMER_OFFSET 0 -#define IFX_SSC_BRSTAT_BAUDTIMER_MASK 0xFFFF - -/* TB register */ -#define IFX_SSC_TB_DATA_OFFSET 0 -#define IFX_SSC_TB_DATA_MASK 0xFFFFFFFF - -/* RB register */ -#define IFX_SSC_RB_DATA_OFFSET 0 -#define IFX_SSC_RB_DATA_MASK 0xFFFFFFFF - - -/* RXFCON and TXFCON registers */ -#define IFX_SSC_XFCON_FIFO_DISABLE 0x0000 -#define IFX_SSC_XFCON_FIFO_ENABLE 0x0001 -#define IFX_SSC_XFCON_FIFO_FLUSH 0x0002 -#define IFX_SSC_XFCON_ITL_MASK 0x00003F00 -#define IFX_SSC_XFCON_ITL_OFFSET 8 - -/* FSTAT register */ -#define IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET 0 -#define IFX_SSC_FSTAT_RECEIVED_WORDS_MASK 0x003F -#define IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET 8 -#define IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK 0x3F00 - -/* GPOCON register */ -#define IFX_SSC_GPOCON_INVOUT0_POS 0 -#define IFX_SSC_GPOCON_INV_OUT0 0x00000001 -#define IFX_SSC_GPOCON_TRUE_OUT0 0x00000000 -#define IFX_SSC_GPOCON_INVOUT1_POS 1 -#define IFX_SSC_GPOCON_INV_OUT1 0x00000002 -#define IFX_SSC_GPOCON_TRUE_OUT1 0x00000000 -#define IFX_SSC_GPOCON_INVOUT2_POS 2 -#define IFX_SSC_GPOCON_INV_OUT2 0x00000003 -#define IFX_SSC_GPOCON_TRUE_OUT2 0x00000000 -#define IFX_SSC_GPOCON_INVOUT3_POS 3 -#define IFX_SSC_GPOCON_INV_OUT3 0x00000008 -#define IFX_SSC_GPOCON_TRUE_OUT3 0x00000000 -#define IFX_SSC_GPOCON_INVOUT4_POS 4 -#define IFX_SSC_GPOCON_INV_OUT4 0x00000010 -#define IFX_SSC_GPOCON_TRUE_OUT4 0x00000000 -#define IFX_SSC_GPOCON_INVOUT5_POS 5 -#define IFX_SSC_GPOCON_INV_OUT5 0x00000020 -#define IFX_SSC_GPOCON_TRUE_OUT5 0x00000000 -#define IFX_SSC_GPOCON_INVOUT6_POS 6 -#define IFX_SSC_GPOCON_INV_OUT6 0x00000040 -#define IFX_SSC_GPOCON_TRUE_OUT6 0x00000000 -#define IFX_SSC_GPOCON_INVOUT7_POS 7 -#define IFX_SSC_GPOCON_INV_OUT7 0x00000080 -#define IFX_SSC_GPOCON_TRUE_OUT7 0x00000000 -#define IFX_SSC_GPOCON_INV_OUT_ALL 0x000000FF -#define IFX_SSC_GPOCON_TRUE_OUT_ALL 0x00000000 - -#define IFX_SSC_GPOCON_ISCSB0_POS 8 -#define IFX_SSC_GPOCON_IS_CSB0 0x00000100 -#define IFX_SSC_GPOCON_IS_GPO0 0x00000000 -#define IFX_SSC_GPOCON_ISCSB1_POS 9 -#define IFX_SSC_GPOCON_IS_CSB1 0x00000200 -#define IFX_SSC_GPOCON_IS_GPO1 0x00000000 -#define IFX_SSC_GPOCON_ISCSB2_POS 10 -#define IFX_SSC_GPOCON_IS_CSB2 0x00000400 -#define IFX_SSC_GPOCON_IS_GPO2 0x00000000 -#define IFX_SSC_GPOCON_ISCSB3_POS 11 -#define IFX_SSC_GPOCON_IS_CSB3 0x00000800 -#define IFX_SSC_GPOCON_IS_GPO3 0x00000000 -#define IFX_SSC_GPOCON_ISCSB4_POS 12 -#define IFX_SSC_GPOCON_IS_CSB4 0x00001000 -#define IFX_SSC_GPOCON_IS_GPO4 0x00000000 -#define IFX_SSC_GPOCON_ISCSB5_POS 13 -#define IFX_SSC_GPOCON_IS_CSB5 0x00002000 -#define IFX_SSC_GPOCON_IS_GPO5 0x00000000 -#define IFX_SSC_GPOCON_ISCSB6_POS 14 -#define IFX_SSC_GPOCON_IS_CSB6 0x00004000 -#define IFX_SSC_GPOCON_IS_GPO6 0x00000000 -#define IFX_SSC_GPOCON_ISCSB7_POS 15 -#define IFX_SSC_GPOCON_IS_CSB7 0x00008000 -#define IFX_SSC_GPOCON_IS_GPO7 0x00000000 -#define IFX_SSC_GPOCON_IS_CSB_ALL 0x0000FF00 -#define IFX_SSC_GPOCON_IS_GPO_ALL 0x00000000 - -/* GPOSTAT register */ -#define IFX_SSC_GPOSTAT_OUT0 0x00000001 -#define IFX_SSC_GPOSTAT_OUT1 0x00000002 -#define IFX_SSC_GPOSTAT_OUT2 0x00000004 -#define IFX_SSC_GPOSTAT_OUT3 0x00000008 -#define IFX_SSC_GPOSTAT_OUT4 0x00000010 -#define IFX_SSC_GPOSTAT_OUT5 0x00000020 -#define IFX_SSC_GPOSTAT_OUT6 0x00000040 -#define IFX_SSC_GPOSTAT_OUT7 0x00000080 -#define IFX_SSC_GPOSTAT_OUT_ALL 0x000000FF - -/* WHBGPOSTAT register */ -#define IFX_SSC_WHBGPOSTAT_CLROUT0_POS 0 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT0 0x00000001 -#define IFX_SSC_WHBGPOSTAT_CLROUT1_POS 1 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT1 0x00000002 -#define IFX_SSC_WHBGPOSTAT_CLROUT2_POS 2 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT2 0x00000004 -#define IFX_SSC_WHBGPOSTAT_CLROUT3_POS 3 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT3 0x00000008 -#define IFX_SSC_WHBGPOSTAT_CLROUT4_POS 4 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT4 0x00000010 -#define IFX_SSC_WHBGPOSTAT_CLROUT5_POS 5 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT5 0x00000020 -#define IFX_SSC_WHBGPOSTAT_CLROUT6_POS 6 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT6 0x00000040 -#define IFX_SSC_WHBGPOSTAT_CLROUT7_POS 7 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT7 0x00000080 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT_ALL 0x000000FF - -#define IFX_SSC_WHBGPOSTAT_OUT0_POS 0 -#define IFX_SSC_WHBGPOSTAT_OUT1_POS 1 -#define IFX_SSC_WHBGPOSTAT_OUT2_POS 2 -#define IFX_SSC_WHBGPOSTAT_OUT3_POS 3 -#define IFX_SSC_WHBGPOSTAT_OUT4_POS 4 -#define IFX_SSC_WHBGPOSTAT_OUT5_POS 5 -#define IFX_SSC_WHBGPOSTAT_OUT6_POS 6 -#define IFX_SSC_WHBGPOSTAT_OUT7_POS 7 - - -#define IFX_SSC_WHBGPOSTAT_SETOUT0_POS 8 -#define IFX_SSC_WHBGPOSTAT_SET_OUT0 0x00000100 -#define IFX_SSC_WHBGPOSTAT_SETOUT1_POS 9 -#define IFX_SSC_WHBGPOSTAT_SET_OUT1 0x00000200 -#define IFX_SSC_WHBGPOSTAT_SETOUT2_POS 10 -#define IFX_SSC_WHBGPOSTAT_SET_OUT2 0x00000400 -#define IFX_SSC_WHBGPOSTAT_SETOUT3_POS 11 -#define IFX_SSC_WHBGPOSTAT_SET_OUT3 0x00000800 -#define IFX_SSC_WHBGPOSTAT_SETOUT4_POS 12 -#define IFX_SSC_WHBGPOSTAT_SET_OUT4 0x00001000 -#define IFX_SSC_WHBGPOSTAT_SETOUT5_POS 13 -#define IFX_SSC_WHBGPOSTAT_SET_OUT5 0x00002000 -#define IFX_SSC_WHBGPOSTAT_SETOUT6_POS 14 -#define IFX_SSC_WHBGPOSTAT_SET_OUT6 0x00004000 -#define IFX_SSC_WHBGPOSTAT_SETOUT7_POS 15 -#define IFX_SSC_WHBGPOSTAT_SET_OUT7 0x00008000 -#define IFX_SSC_WHBGPOSTAT_SET_OUT_ALL 0x0000FF00 - -/* SFCON register */ -#define IFX_SSC_SFCON_SF_ENABLE 0x00000001 -#define IFX_SSC_SFCON_SF_DISABLE 0x00000000 -#define IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE 0x00000004 -#define IFX_SSC_SFCON_FIR_DISABLE_BEFORE_PAUSE 0x00000000 -#define IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE 0x00000008 -#define IFX_SSC_SFCON_FIR_DISABLE_AFTER_PAUSE 0x00000000 -#define IFX_SSC_SFCON_DATA_LENGTH_MASK 0x0000FFF0 -#define IFX_SSC_SFCON_DATA_LENGTH_OFFSET 4 -#define IFX_SSC_SFCON_PAUSE_DATA_MASK 0x00030000 -#define IFX_SSC_SFCON_PAUSE_DATA_OFFSET 16 -#define IFX_SSC_SFCON_PAUSE_DATA_0 0x00000000 -#define IFX_SSC_SFCON_PAUSE_DATA_1 0x00010000 -#define IFX_SSC_SFCON_PAUSE_DATA_IDLE 0x00020000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_MASK 0x000C0000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET 18 -#define IFX_SSC_SFCON_PAUSE_CLOCK_0 0x00000000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_1 0x00040000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_IDLE 0x00080000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_RUN 0x000C0000 -#define IFX_SSC_SFCON_STOP_AFTER_PAUSE 0x00100000 -#define IFX_SSC_SFCON_CONTINUE_AFTER_PAUSE 0x00000000 -#define IFX_SSC_SFCON_PAUSE_LENGTH_MASK 0xFFC00000 -#define IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET 22 -#define IFX_SSC_SFCON_DATA_LENGTH_MAX 4096 -#define IFX_SSC_SFCON_PAUSE_LENGTH_MAX 1024 - -#define IFX_SSC_SFCON_EXTRACT_DATA_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_DATA_LENGTH_MASK) >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET) -#define IFX_SSC_SFCON_EXTRACT_PAUSE_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) -#define IFX_SSC_SFCON_SET_DATA_LENGTH(value) ((value << IFX_SSC_SFCON_DATA_LENGTH_OFFSET) & IFX_SSC_SFCON_DATA_LENGTH_MASK) -#define IFX_SSC_SFCON_SET_PAUSE_LENGTH(value) ((value << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) - -/* SFSTAT register */ -#define IFX_SSC_SFSTAT_IN_DATA 0x00000001 -#define IFX_SSC_SFSTAT_IN_PAUSE 0x00000002 -#define IFX_SSC_SFSTAT_DATA_COUNT_MASK 0x0000FFF0 -#define IFX_SSC_SFSTAT_DATA_COUNT_OFFSET 4 -#define IFX_SSC_SFSTAT_PAUSE_COUNT_MASK 0xFFF00000 -#define IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET 20 - -#define IFX_SSC_SFSTAT_EXTRACT_DATA_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_DATA_COUNT_MASK) >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET) -#define IFX_SSC_SFSTAT_EXTRACT_PAUSE_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET) - -/* RXREQ register */ -#define IFX_SSC_RXREQ_RXCOUNT_MASK 0x0000FFFF -#define IFX_SSC_RXREQ_RXCOUNT_OFFSET 0 - -/* RXCNT register */ -#define IFX_SSC_RXCNT_TODO_MASK 0x0000FFFF -#define IFX_SSC_RXCNT_TODO_OFFSET 0 - -/* DMACON register */ -#define IFX_SSC_DMACON_RXON 0x00000001 -#define IFX_SSC_DMACON_RXOFF 0x00000000 -#define IFX_SSC_DMACON_TXON 0x00000002 -#define IFX_SSC_DMACON_TXOFF 0x00000000 -#define IFX_SSC_DMACON_DMAON 0x00000003 -#define IFX_SSC_DMACON_DMAOFF 0x00000000 -#define IFX_SSC_DMACON_CLASS_MASK 0x0000000C -#define IFX_SSC_DMACON_CLASS_OFFSET 2 - -/* register access macros */ -#define ifx_ssc_fstat_received_words(status) (status & 0x003F) -#define ifx_ssc_fstat_words_to_transmit(status) ((status & 0x3F00) >> 8) - -#define ifx_ssc_change_status(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_WHBSTATE)) -#define ifx_ssc_set_config(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_CON)) -#define ifx_ssc_get_config(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_CON)) -#define ifx_ssc_get_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_STATE)) -#define ifx_ssc_receive(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_RB)) -#define ifx_ssc_transmit(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_TB)) -#define ifx_ssc_fifo_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_FSTAT)) -#define ifx_ssc_set_baudrate(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_BR)) - -#define ifx_ssc_extract_rx_fifo_size(id) ((id & IFX_SSC_PERID_RXFS_MASK) >> IFX_SSC_PERID_RXFS_OFFSET) -#define ifx_ssc_extract_tx_fifo_size(id) ((id & IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET) - -#endif diff --git a/target/linux/amazon/files/include/asm-mips/amazon/irq.h b/target/linux/amazon/files/include/asm-mips/amazon/irq.h deleted file mode 100644 index c575dd64b2..0000000000 --- a/target/linux/amazon/files/include/asm-mips/amazon/irq.h +++ /dev/null @@ -1,200 +0,0 @@ -/* irq.h - AMAZON interrupts */ - -#ifndef __AMAZON_IRQ -#define __AMAZON_IRQ - -/************************************************************************ - * Interrupt information -*************************************************************************/ - -/* these vectors are to handle the interrupts from the internal AMAZON - interrupt controller. THe INT_NUM values are really just indices into - an array and are set up so that we can use the INT_NUM as a shift - to calculate a mask value. */ -#define INT_NUM_IRQ0 8 -#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0) -#define INT_NUM_IM0_IRL1 (INT_NUM_IRQ0 + 1) -#define INT_NUM_IM0_IRL2 (INT_NUM_IRQ0 + 2) -#define INT_NUM_IM0_IRL3 (INT_NUM_IRQ0 + 3) -#define INT_NUM_IM0_IRL4 (INT_NUM_IRQ0 + 4) -#define INT_NUM_IM0_IRL5 (INT_NUM_IRQ0 + 5) -#define INT_NUM_IM0_IRL6 (INT_NUM_IRQ0 + 6) -#define INT_NUM_IM0_IRL7 (INT_NUM_IRQ0 + 7) -#define INT_NUM_IM0_IRL8 (INT_NUM_IRQ0 + 8) -#define INT_NUM_IM0_IRL9 (INT_NUM_IRQ0 + 9) -#define INT_NUM_IM0_IRL10 (INT_NUM_IRQ0 + 10) -#define INT_NUM_IM0_IRL11 (INT_NUM_IRQ0 + 11) -#define INT_NUM_IM0_IRL12 (INT_NUM_IRQ0 + 12) -#define INT_NUM_IM0_IRL13 (INT_NUM_IRQ0 + 13) -#define INT_NUM_IM0_IRL14 (INT_NUM_IRQ0 + 14) -#define INT_NUM_IM0_IRL15 (INT_NUM_IRQ0 + 15) -#define INT_NUM_IM0_IRL16 (INT_NUM_IRQ0 + 16) -#define INT_NUM_IM0_IRL17 (INT_NUM_IRQ0 + 17) -#define INT_NUM_IM0_IRL18 (INT_NUM_IRQ0 + 18) -#define INT_NUM_IM0_IRL19 (INT_NUM_IRQ0 + 19) -#define INT_NUM_IM0_IRL20 (INT_NUM_IRQ0 + 20) -#define INT_NUM_IM0_IRL21 (INT_NUM_IRQ0 + 21) -#define INT_NUM_IM0_IRL22 (INT_NUM_IRQ0 + 22) -#define INT_NUM_IM0_IRL23 (INT_NUM_IRQ0 + 23) -#define INT_NUM_IM0_IRL24 (INT_NUM_IRQ0 + 24) -#define INT_NUM_IM0_IRL25 (INT_NUM_IRQ0 + 25) -#define INT_NUM_IM0_IRL26 (INT_NUM_IRQ0 + 26) -#define INT_NUM_IM0_IRL27 (INT_NUM_IRQ0 + 27) -#define INT_NUM_IM0_IRL28 (INT_NUM_IRQ0 + 28) -#define INT_NUM_IM0_IRL29 (INT_NUM_IRQ0 + 29) -#define INT_NUM_IM0_IRL30 (INT_NUM_IRQ0 + 30) -#define INT_NUM_IM0_IRL31 (INT_NUM_IRQ0 + 31) - -#define INT_NUM_IM1_IRL0 (INT_NUM_IRQ0 + 32) -#define INT_NUM_IM1_IRL1 (INT_NUM_IM1_IRL0 + 1) -#define INT_NUM_IM1_IRL2 (INT_NUM_IM1_IRL0 + 2) -#define INT_NUM_IM1_IRL3 (INT_NUM_IM1_IRL0 + 3) -#define INT_NUM_IM1_IRL4 (INT_NUM_IM1_IRL0 + 4) -#define INT_NUM_IM1_IRL5 (INT_NUM_IM1_IRL0 + 5) -#define INT_NUM_IM1_IRL6 (INT_NUM_IM1_IRL0 + 6) -#define INT_NUM_IM1_IRL7 (INT_NUM_IM1_IRL0 + 7) -#define INT_NUM_IM1_IRL8 (INT_NUM_IM1_IRL0 + 8) -#define INT_NUM_IM1_IRL9 (INT_NUM_IM1_IRL0 + 9) -#define INT_NUM_IM1_IRL10 (INT_NUM_IM1_IRL0 + 10) -#define INT_NUM_IM1_IRL11 (INT_NUM_IM1_IRL0 + 11) -#define INT_NUM_IM1_IRL12 (INT_NUM_IM1_IRL0 + 12) -#define INT_NUM_IM1_IRL13 (INT_NUM_IM1_IRL0 + 13) -#define INT_NUM_IM1_IRL14 (INT_NUM_IM1_IRL0 + 14) -#define INT_NUM_IM1_IRL15 (INT_NUM_IM1_IRL0 + 15) -#define INT_NUM_IM1_IRL16 (INT_NUM_IM1_IRL0 + 16) -#define INT_NUM_IM1_IRL17 (INT_NUM_IM1_IRL0 + 17) -#define INT_NUM_IM1_IRL18 (INT_NUM_IM1_IRL0 + 18) -#define INT_NUM_IM1_IRL19 (INT_NUM_IM1_IRL0 + 19) -#define INT_NUM_IM1_IRL20 (INT_NUM_IM1_IRL0 + 20) -#define INT_NUM_IM1_IRL21 (INT_NUM_IM1_IRL0 + 21) -#define INT_NUM_IM1_IRL22 (INT_NUM_IM1_IRL0 + 22) -#define INT_NUM_IM1_IRL23 (INT_NUM_IM1_IRL0 + 23) -#define INT_NUM_IM1_IRL24 (INT_NUM_IM1_IRL0 + 24) -#define INT_NUM_IM1_IRL25 (INT_NUM_IM1_IRL0 + 25) -#define INT_NUM_IM1_IRL26 (INT_NUM_IM1_IRL0 + 26) -#define INT_NUM_IM1_IRL27 (INT_NUM_IM1_IRL0 + 27) -#define INT_NUM_IM1_IRL28 (INT_NUM_IM1_IRL0 + 28) -#define INT_NUM_IM1_IRL29 (INT_NUM_IM1_IRL0 + 29) -#define INT_NUM_IM1_IRL30 (INT_NUM_IM1_IRL0 + 30) -#define INT_NUM_IM1_IRL31 (INT_NUM_IM1_IRL0 + 31) - -#define INT_NUM_IM2_IRL0 (INT_NUM_IRQ0 + 64) -#define INT_NUM_IM2_IRL1 (INT_NUM_IM2_IRL0 + 1) -#define INT_NUM_IM2_IRL2 (INT_NUM_IM2_IRL0 + 2) -#define INT_NUM_IM2_IRL3 (INT_NUM_IM2_IRL0 + 3) -#define INT_NUM_IM2_IRL4 (INT_NUM_IM2_IRL0 + 4) -#define INT_NUM_IM2_IRL5 (INT_NUM_IM2_IRL0 + 5) -#define INT_NUM_IM2_IRL6 (INT_NUM_IM2_IRL0 + 6) -#define INT_NUM_IM2_IRL7 (INT_NUM_IM2_IRL0 + 7) -#define INT_NUM_IM2_IRL8 (INT_NUM_IM2_IRL0 + 8) -#define INT_NUM_IM2_IRL9 (INT_NUM_IM2_IRL0 + 9) -#define INT_NUM_IM2_IRL10 (INT_NUM_IM2_IRL0 + 10) -#define INT_NUM_IM2_IRL11 (INT_NUM_IM2_IRL0 + 11) -#define INT_NUM_IM2_IRL12 (INT_NUM_IM2_IRL0 + 12) -#define INT_NUM_IM2_IRL13 (INT_NUM_IM2_IRL0 + 13) -#define INT_NUM_IM2_IRL14 (INT_NUM_IM2_IRL0 + 14) -#define INT_NUM_IM2_IRL15 (INT_NUM_IM2_IRL0 + 15) -#define INT_NUM_IM2_IRL16 (INT_NUM_IM2_IRL0 + 16) -#define INT_NUM_IM2_IRL17 (INT_NUM_IM2_IRL0 + 17) -#define INT_NUM_IM2_IRL18 (INT_NUM_IM2_IRL0 + 18) -#define INT_NUM_IM2_IRL19 (INT_NUM_IM2_IRL0 + 19) -#define INT_NUM_IM2_IRL20 (INT_NUM_IM2_IRL0 + 20) -#define INT_NUM_IM2_IRL21 (INT_NUM_IM2_IRL0 + 21) -#define INT_NUM_IM2_IRL22 (INT_NUM_IM2_IRL0 + 22) -#define INT_NUM_IM2_IRL23 (INT_NUM_IM2_IRL0 + 23) -#define INT_NUM_IM2_IRL24 (INT_NUM_IM2_IRL0 + 24) -#define INT_NUM_IM2_IRL25 (INT_NUM_IM2_IRL0 + 25) -#define INT_NUM_IM2_IRL26 (INT_NUM_IM2_IRL0 + 26) -#define INT_NUM_IM2_IRL27 (INT_NUM_IM2_IRL0 + 27) -#define INT_NUM_IM2_IRL28 (INT_NUM_IM2_IRL0 + 28) -#define INT_NUM_IM2_IRL29 (INT_NUM_IM2_IRL0 + 29) -#define INT_NUM_IM2_IRL30 (INT_NUM_IM2_IRL0 + 30) -#define INT_NUM_IM2_IRL31 (INT_NUM_IM2_IRL0 + 31) - -#define INT_NUM_IM3_IRL0 (INT_NUM_IRQ0 + 96) -#define INT_NUM_IM3_IRL1 (INT_NUM_IM3_IRL0 + 1) -#define INT_NUM_IM3_IRL2 (INT_NUM_IM3_IRL0 + 2) -#define INT_NUM_IM3_IRL3 (INT_NUM_IM3_IRL0 + 3) -#define INT_NUM_IM3_IRL4 (INT_NUM_IM3_IRL0 + 4) -#define INT_NUM_IM3_IRL5 (INT_NUM_IM3_IRL0 + 5) -#define INT_NUM_IM3_IRL6 (INT_NUM_IM3_IRL0 + 6) -#define INT_NUM_IM3_IRL7 (INT_NUM_IM3_IRL0 + 7) -#define INT_NUM_IM3_IRL8 (INT_NUM_IM3_IRL0 + 8) -#define INT_NUM_IM3_IRL9 (INT_NUM_IM3_IRL0 + 9) -#define INT_NUM_IM3_IRL10 (INT_NUM_IM3_IRL0 + 10) -#define INT_NUM_IM3_IRL11 (INT_NUM_IM3_IRL0 + 11) -#define INT_NUM_IM3_IRL12 (INT_NUM_IM3_IRL0 + 12) -#define INT_NUM_IM3_IRL13 (INT_NUM_IM3_IRL0 + 13) -#define INT_NUM_IM3_IRL14 (INT_NUM_IM3_IRL0 + 14) -#define INT_NUM_IM3_IRL15 (INT_NUM_IM3_IRL0 + 15) -#define INT_NUM_IM3_IRL16 (INT_NUM_IM3_IRL0 + 16) -#define INT_NUM_IM3_IRL17 (INT_NUM_IM3_IRL0 + 17) -#define INT_NUM_IM3_IRL18 (INT_NUM_IM3_IRL0 + 18) -#define INT_NUM_IM3_IRL19 (INT_NUM_IM3_IRL0 + 19) -#define INT_NUM_IM3_IRL20 (INT_NUM_IM3_IRL0 + 20) -#define INT_NUM_IM3_IRL21 (INT_NUM_IM3_IRL0 + 21) -#define INT_NUM_IM3_IRL22 (INT_NUM_IM3_IRL0 + 22) -#define INT_NUM_IM3_IRL23 (INT_NUM_IM3_IRL0 + 23) -#define INT_NUM_IM3_IRL24 (INT_NUM_IM3_IRL0 + 24) -#define INT_NUM_IM3_IRL25 (INT_NUM_IM3_IRL0 + 25) -#define INT_NUM_IM3_IRL26 (INT_NUM_IM3_IRL0 + 26) -#define INT_NUM_IM3_IRL27 (INT_NUM_IM3_IRL0 + 27) -#define INT_NUM_IM3_IRL28 (INT_NUM_IM3_IRL0 + 28) -#define INT_NUM_IM3_IRL29 (INT_NUM_IM3_IRL0 + 29) -#define INT_NUM_IM3_IRL30 (INT_NUM_IM3_IRL0 + 30) -#define INT_NUM_IM3_IRL31 (INT_NUM_IM3_IRL0 + 31) - -#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128) -#define INT_NUM_IM4_IRL1 (INT_NUM_IM4_IRL0 + 1) -#define INT_NUM_IM4_IRL2 (INT_NUM_IM4_IRL0 + 2) -#define INT_NUM_IM4_IRL3 (INT_NUM_IM4_IRL0 + 3) -#define INT_NUM_IM4_IRL4 (INT_NUM_IM4_IRL0 + 4) -#define INT_NUM_IM4_IRL5 (INT_NUM_IM4_IRL0 + 5) -#define INT_NUM_IM4_IRL6 (INT_NUM_IM4_IRL0 + 6) -#define INT_NUM_IM4_IRL7 (INT_NUM_IM4_IRL0 + 7) -#define INT_NUM_IM4_IRL8 (INT_NUM_IM4_IRL0 + 8) -#define INT_NUM_IM4_IRL9 (INT_NUM_IM4_IRL0 + 9) -#define INT_NUM_IM4_IRL10 (INT_NUM_IM4_IRL0 + 10) -#define INT_NUM_IM4_IRL11 (INT_NUM_IM4_IRL0 + 11) -#define INT_NUM_IM4_IRL12 (INT_NUM_IM4_IRL0 + 12) -#define INT_NUM_IM4_IRL13 (INT_NUM_IM4_IRL0 + 13) -#define INT_NUM_IM4_IRL14 (INT_NUM_IM4_IRL0 + 14) -#define INT_NUM_IM4_IRL15 (INT_NUM_IM4_IRL0 + 15) -#define INT_NUM_IM4_IRL16 (INT_NUM_IM4_IRL0 + 16) -#define INT_NUM_IM4_IRL17 (INT_NUM_IM4_IRL0 + 17) -#define INT_NUM_IM4_IRL18 (INT_NUM_IM4_IRL0 + 18) -#define INT_NUM_IM4_IRL19 (INT_NUM_IM4_IRL0 + 19) -#define INT_NUM_IM4_IRL20 (INT_NUM_IM4_IRL0 + 20) -#define INT_NUM_IM4_IRL21 (INT_NUM_IM4_IRL0 + 21) -#define INT_NUM_IM4_IRL22 (INT_NUM_IM4_IRL0 + 22) -#define INT_NUM_IM4_IRL23 (INT_NUM_IM4_IRL0 + 23) -#define INT_NUM_IM4_IRL24 (INT_NUM_IM4_IRL0 + 24) -#define INT_NUM_IM4_IRL25 (INT_NUM_IM4_IRL0 + 25) -#define INT_NUM_IM4_IRL26 (INT_NUM_IM4_IRL0 + 26) -#define INT_NUM_IM4_IRL27 (INT_NUM_IM4_IRL0 + 27) -#define INT_NUM_IM4_IRL28 (INT_NUM_IM4_IRL0 + 28) -#define INT_NUM_IM4_IRL29 (INT_NUM_IM4_IRL0 + 29) -#define INT_NUM_IM4_IRL30 (INT_NUM_IM4_IRL0 + 30) -#define INT_NUM_IM4_IRL31 (INT_NUM_IM4_IRL0 + 31) - -/****** Interrupt Assigments ***********/ -#define AMAZON_DMA_INT INT_NUM_IM0_IRL0 -#define IFX_SSC_TIR INT_NUM_IM0_IRL29 -#define IFX_SSC_RIR INT_NUM_IM0_IRL30 -#define IFX_SSC_EIR INT_NUM_IM0_IRL31 - -#define AMAZON_MEI_INT INT_NUM_IM2_IRL8 - -#define AMAZONASC_TIR INT_NUM_IM4_IRL15/* TX interrupt */ -#define AMAZONASC_RIR INT_NUM_IM4_IRL16/* RX interrupt */ -#define AMAZONASC_EIR INT_NUM_IM4_IRL17/* ERROR interrupt */ - -#define AMAZON_TIMER6_INT INT_NUM_IM1_IRL23 - -#define AMAZON_SWIE_INT INT_NUM_IM3_IRL8 -#define AMAZON_CBM_INT INT_NUM_IM3_IRL9 -#define AMAZON_AAL5_INT INT_NUM_IM3_IRL10 -#define AMAZON_HTU_INT INT_NUM_IM3_IRL11 -#define AMAZON_QSB_INT INT_NUM_IM3_IRL12 -#define MIPS_CPU_TIMER_IRQ 7 -#endif /* __AMAZON_IRQ */ diff --git a/target/linux/amazon/files/include/asm-mips/amazon/model.h b/target/linux/amazon/files/include/asm-mips/amazon/model.h deleted file mode 100644 index 4e43ab5f19..0000000000 --- a/target/linux/amazon/files/include/asm-mips/amazon/model.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef AMAZON_MODEL_H -#define AMAZON_MODEL_H -/****************************************************************************** - Copyright (c) 2002, Infineon Technologies. All rights reserved. - - No Warranty - Because the program is licensed free of charge, there is no warranty for - the program, to the extent permitted by applicable law. Except when - otherwise stated in writing the copyright holders and/or other parties - provide the program "as is" without warranty of any kind, either - expressed or implied, including, but not limited to, the implied - warranties of merchantability and fitness for a particular purpose. The - entire risk as to the quality and performance of the program is with - you. should the program prove defective, you assume the cost of all - necessary servicing, repair or correction. - - In no event unless required by applicable law or agreed to in writing - will any copyright holder, or any other party who may modify and/or - redistribute the program as permitted above, be liable to you for - damages, including any general, special, incidental or consequential - damages arising out of the use or inability to use the program - (including but not limited to loss of data or data being rendered - inaccurate or losses sustained by you or third parties or a failure of - the program to operate with any other programs), even if such holder or - other party has been advised of the possibility of such damages. -******************************************************************************/ -#define BOARD_SYSTEM_TYPE "AMAZON" -#define SYSTEM_MODEL_NAME "Amazon Gateway Package 3.2 Version" -#endif diff --git a/target/linux/amazon/files/include/asm-mips/amazon/port.h b/target/linux/amazon/files/include/asm-mips/amazon/port.h deleted file mode 100644 index 21825794c5..0000000000 --- a/target/linux/amazon/files/include/asm-mips/amazon/port.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * port.h - * - * Global Amazon port driver header file - * - */ - -/* Modification history */ -/* 21Jun2004 btxu Generate from Inca_IP project */ - - -#ifndef PORT_H -#define PORT_H - -struct amazon_port_ioctl_parm { - int port; - int pin; - int value; -}; -#define AMAZON_PORT_IOC_MAGIC 0xbf -#define AMAZON_PORT_IOCOD _IOW( AMAZON_PORT_IOC_MAGIC,0,struct amazon_port_ioctl_parm) -#define AMAZON_PORT_IOCPUDSEL _IOW( AMAZON_PORT_IOC_MAGIC,1,struct amazon_port_ioctl_parm) -#define AMAZON_PORT_IOCPUDEN _IOW( AMAZON_PORT_IOC_MAGIC,2,struct amazon_port_ioctl_parm) -#define AMAZON_PORT_IOCSTOFF _IOW( AMAZON_PORT_IOC_MAGIC,3,struct amazon_port_ioctl_parm) -#define AMAZON_PORT_IOCDIR _IOW( AMAZON_PORT_IOC_MAGIC,4,struct amazon_port_ioctl_parm) -#define AMAZON_PORT_IOCOUTPUT _IOW( AMAZON_PORT_IOC_MAGIC,5,struct amazon_port_ioctl_parm) -#define AMAZON_PORT_IOCINPUT _IOWR(AMAZON_PORT_IOC_MAGIC,6,struct amazon_port_ioctl_parm) -#define AMAZON_PORT_IOCALTSEL0 _IOW( AMAZON_PORT_IOC_MAGIC,7,struct amazon_port_ioctl_parm) -#define AMAZON_PORT_IOCALTSEL1 _IOW( AMAZON_PORT_IOC_MAGIC,8,struct amazon_port_ioctl_parm) - -int amazon_port_reserve_pin(int port, int pin, int module_id); -int amazon_port_free_pin(int port, int pin, int module_id); -int amazon_port_set_open_drain(int port, int pin, int module_id); -int amazon_port_clear_open_drain(int port, int pin, int module_id); -int amazon_port_set_pudsel(int port, int pin, int module_id); -int amazon_port_clear_pudsel(int port, int pin, int module_id); -int amazon_port_set_puden(int port, int pin, int module_id); -int amazon_port_clear_puden(int port, int pin, int module_id); -int amazon_port_set_stoff(int port, int pin, int module_id); -int amazon_port_clear_stoff(int port, int pin, int module_id); -int amazon_port_set_dir_out(int port, int pin, int module_id); -int amazon_port_set_dir_in(int port, int pin, int module_id); -int amazon_port_set_output(int port, int pin, int module_id); -int amazon_port_clear_output(int port, int pin, int module_id); -int amazon_port_get_input(int port, int pin, int module_id); - -int amazon_port_set_altsel0(int port, int pin, int module_id); -int amazon_port_clear_altsel0(int port, int pin, int module_id); -int amazon_port_set_altsel1(int port, int pin, int module_id); -int amazon_port_clear_altsel1(int port, int pin, int module_id); - - -#endif /* PORT_H */ - - diff --git a/target/linux/amazon/files/include/asm-mips/amazon/serial.h b/target/linux/amazon/files/include/asm-mips/amazon/serial.h deleted file mode 100644 index 3ff3efc28d..0000000000 --- a/target/linux/amazon/files/include/asm-mips/amazon/serial.h +++ /dev/null @@ -1,146 +0,0 @@ -/* incaAscSio.h - (AMAZON) ASC UART tty driver header */ - -#ifndef __AMAZON_ASC_H -#define __AMAZON_ASC_H - -/* channel operating modes */ -#define ASCOPT_CSIZE 0x00000003 -#define ASCOPT_CS7 0x00000001 -#define ASCOPT_CS8 0x00000002 -#define ASCOPT_PARENB 0x00000004 -#define ASCOPT_STOPB 0x00000008 -#define ASCOPT_PARODD 0x00000010 -#define ASCOPT_CREAD 0x00000020 - -#define ASC_OPTIONS (ASCOPT_CREAD | ASCOPT_CS8) - -/* ASC input select (0 or 1) */ -#define CONSOLE_TTY 0 - -/* use fractional divider for baudrate settings */ -#define AMAZONASC_USE_FDV - -#ifdef AMAZONASC_USE_FDV - #define AMAZONASC_FDV_LOW_BAUDRATE 71 -#ifdef CONFIG_USE_IKOS - #define AMAZONASC_FDV_HIGH_BAUDRATE 443 -#else - #define AMAZONASC_FDV_HIGH_BAUDRATE 498 -#endif //CONFIG_USE_IKOS -#endif /*AMAZONASC_USE_FDV*/ - - -#define AMAZONASC_TXFIFO_FL 1 -#define AMAZONASC_RXFIFO_FL 1 -#define AMAZONASC_TXFIFO_FULL 16 - -/* interrupt lines masks for the ASC device interrupts*/ -/* change these macroses if it's necessary */ -#define AMAZONASC_IRQ_LINE_ALL 0x000F0000 /* all IRQs */ - -#define AMAZONASC_IRQ_LINE_TIR 0x00010000 /* TIR - Tx */ -#define AMAZONASC_IRQ_LINE_RIR 0x00020000 /* RIR - Rx */ -#define AMAZONASC_IRQ_LINE_EIR 0x00040000 /* EIR - Err */ -#define AMAZONASC_IRQ_LINE_TBIR 0x00080000 /* TBIR - Tx Buf*/ - -/* CLC register's bits and bitfields */ -#define ASCCLC_DISR 0x00000001 -#define ASCCLC_DISS 0x00000002 -#define ASCCLC_RMCMASK 0x0000FF00 -#define ASCCLC_RMCOFFSET 8 - -/* CON register's bits and bitfields */ -#define ASCCON_MODEMASK 0x0007 - #define ASCCON_M_8SYNC 0x0 - #define ASCCON_M_8ASYNC 0x1 - #define ASCCON_M_8IRDAASYNC 0x2 - #define ASCCON_M_7ASYNCPAR 0x3 - #define ASCCON_M_9ASYNC 0x4 - #define ASCCON_M_8WAKEUPASYNC 0x5 - #define ASCCON_M_8ASYNCPAR 0x7 -#define ASCCON_STP 0x0008 -#define ASCCON_REN 0x0010 -#define ASCCON_PEN 0x0020 -#define ASCCON_FEN 0x0040 -#define ASCCON_OEN 0x0080 -#define ASCCON_PE 0x0100 -#define ASCCON_FE 0x0200 -#define ASCCON_OE 0x0400 -#define ASCCON_FDE 0x0800 -#define ASCCON_ODD 0x1000 -#define ASCCON_BRS 0x2000 -#define ASCCON_LB 0x4000 -#define ASCCON_R 0x8000 -#define ASCCON_ANY (ASCCON_PE|ASCCON_FE|ASCCON_OE) - -/* WHBCON register's bits and bitfields */ -#define ASCWHBCON_CLRREN 0x0010 -#define ASCWHBCON_SETREN 0x0020 -#define ASCWHBCON_CLRPE 0x0100 -#define ASCWHBCON_CLRFE 0x0200 -#define ASCWHBCON_CLROE 0x0400 -#define ASCWHBCON_SETPE 0x0800 -#define ASCWHBCON_SETFE 0x1000 -#define ASCWHBCON_SETOE 0x2000 - -/* ABCON register's bits and bitfields */ -#define ASCABCON_ABEN 0x0001 -#define ASCABCON_AUREN 0x0002 -#define ASCABCON_ABSTEN 0x0004 -#define ASCABCON_ABDETEN 0x0008 -#define ASCABCON_FCDETEN 0x0010 -#define ASCABCON_EMMASK 0x0300 - #define ASCABCON_EMOFF 8 - #define ASCABCON_EM_DISAB 0x0 - #define ASCABCON_EM_DURAB 0x1 - #define ASCABCON_EM_ALWAYS 0x2 -#define ASCABCON_TXINV 0x0400 -#define ASCABCON_RXINV 0x0800 - -/* FDV register mask, offset and bitfields*/ -#define ASCFDV_VALUE_MASK 0x000001FF - -/* WHBABCON register's bits and bitfields */ -#define ASCWHBABCON_SETABEN 0x0001 -#define ASCWHBABCON_CLRABEN 0x0002 - -/* ABSTAT register's bits and bitfields */ -#define ASCABSTAT_FCSDET 0x0001 -#define ASCABSTAT_FCCDET 0x0002 -#define ASCABSTAT_SCSDET 0x0004 -#define ASCABSTAT_SCCDET 0x0008 -#define ASCABSTAT_DETWAIT 0x0010 - -/* WHBABSTAT register's bits and bitfields */ -#define ASCWHBABSTAT_CLRFCSDET 0x0001 -#define ASCWHBABSTAT_SETFCSDET 0x0002 -#define ASCWHBABSTAT_CLRFCCDET 0x0004 -#define ASCWHBABSTAT_SETFCCDET 0x0008 -#define ASCWHBABSTAT_CLRSCSDET 0x0010 -#define ASCWHBABSTAT_SETSCSDET 0x0020 -#define ASCWHBABSTAT_SETSCCDET 0x0040 -#define ASCWHBABSTAT_CLRSCCDET 0x0080 -#define ASCWHBABSTAT_CLRDETWAIT 0x0100 -#define ASCWHBABSTAT_SETDETWAIT 0x0200 - -/* TXFCON register's bits and bitfields */ -#define ASCTXFCON_TXFEN 0x0001 -#define ASCTXFCON_TXFFLU 0x0002 -#define ASCTXFCON_TXTMEN 0x0004 -#define ASCTXFCON_TXFITLMASK 0x3F00 -#define ASCTXFCON_TXFITLOFF 8 - -/* RXFCON register's bits and bitfields */ -#define ASCRXFCON_RXFEN 0x0001 -#define ASCRXFCON_RXFFLU 0x0002 -#define ASCRXFCON_RXTMEN 0x0004 -#define ASCRXFCON_RXFITLMASK 0x3F00 -#define ASCRXFCON_RXFITLOFF 8 - -/* FSTAT register's bits and bitfields */ -#define ASCFSTAT_RXFFLMASK 0x003F -#define ASCFSTAT_TXFFLMASK 0x3F00 -#define ASCFSTAT_TXFFLOFF 8 - -#endif /* __AMAZON_ASC_H */ - diff --git a/target/linux/amazon/image/Makefile b/target/linux/amazon/image/Makefile deleted file mode 100644 index 08f3ba531d..0000000000 --- a/target/linux/amazon/image/Makefile +++ /dev/null @@ -1,30 +0,0 @@ -# -# Copyright (C) 2006-2010 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -define Image/BuildKernel - $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma - mkimage -A mips -O linux -T kernel -C lzma -a 0x80002000 -e \ - 0x80002000 \ - -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \ - -d $(KDIR)/vmlinux.lzma $(KDIR)/uImage - - cp $(KDIR)/uImage $(BIN_DIR)/$(IMG_PREFIX)-uImage -endef - -define Image/Build/squashfs - $(call prepare_generic_squashfs,$(BIN_DIR)/$(IMG_PREFIX)-$(1).image) -endef - -define Image/Build - cat $(KDIR)/uImage $(KDIR)/root.$(1) > $(BIN_DIR)/$(IMG_PREFIX)-$(1).image - $(call Image/Build/$(1),$(1)) -endef - - -$(eval $(call BuildImage)) diff --git a/target/linux/amazon/patches-3.3/000-mips-bad-intctl.patch b/target/linux/amazon/patches-3.3/000-mips-bad-intctl.patch deleted file mode 100644 index 0aa37780a8..0000000000 --- a/target/linux/amazon/patches-3.3/000-mips-bad-intctl.patch +++ /dev/null @@ -1,33 +0,0 @@ ---- a/arch/mips/kernel/traps.c -+++ b/arch/mips/kernel/traps.c -@@ -1593,7 +1593,16 @@ void __cpuinit per_cpu_trap_init(void) - if (cpu_has_mips_r2) { - cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP; - cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7; -+ if (!cp0_compare_irq) -+ cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ; -+ - cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7; -+ if (!cp0_perfcount_irq) -+ cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ; -+ -+ if (arch_fixup_c0_irqs) -+ arch_fixup_c0_irqs(); -+ - if (cp0_perfcount_irq == cp0_compare_irq) - cp0_perfcount_irq = -1; - } else { ---- a/arch/mips/include/asm/irq.h -+++ b/arch/mips/include/asm/irq.h -@@ -139,9 +139,11 @@ extern void free_irqno(unsigned int irq) - * IE7. Since R2 their number has to be read from the c0_intctl register. - */ - #define CP0_LEGACY_COMPARE_IRQ 7 -+#define CP0_LEGACY_PERFCNT_IRQ 7 - - extern int cp0_compare_irq; - extern int cp0_compare_irq_shift; - extern int cp0_perfcount_irq; -+extern void __weak arch_fixup_c0_irqs(void); - - #endif /* _ASM_IRQ_H */ diff --git a/target/linux/amazon/patches-3.3/010-mips_clocksource_init_war.patch b/target/linux/amazon/patches-3.3/010-mips_clocksource_init_war.patch deleted file mode 100644 index 7078b37437..0000000000 --- a/target/linux/amazon/patches-3.3/010-mips_clocksource_init_war.patch +++ /dev/null @@ -1,33 +0,0 @@ ---- a/arch/mips/kernel/cevt-r4k.c -+++ b/arch/mips/kernel/cevt-r4k.c -@@ -23,6 +23,22 @@ - - #ifndef CONFIG_MIPS_MT_SMTC - -+/* -+ * Compare interrupt can be routed and latched outside the core, -+ * so a single execution hazard barrier may not be enough to give -+ * it time to clear as seen in the Cause register. 4 time the -+ * pipeline depth seems reasonably conservative, and empirically -+ * works better in configurations with high CPU/bus clock ratios. -+ */ -+ -+#define compare_change_hazard() \ -+ do { \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ irq_disable_hazard(); \ -+ } while (0) -+ - static int mips_next_event(unsigned long delta, - struct clock_event_device *evt) - { -@@ -32,6 +48,7 @@ static int mips_next_event(unsigned long - cnt = read_c0_count(); - cnt += delta; - write_c0_compare(cnt); -+ compare_change_hazard(); - res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0; - return res; - } diff --git a/target/linux/amazon/patches-3.3/017-wdt-driver.patch b/target/linux/amazon/patches-3.3/017-wdt-driver.patch deleted file mode 100644 index 005ee710ac..0000000000 --- a/target/linux/amazon/patches-3.3/017-wdt-driver.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -132,6 +132,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o - obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o - octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o - obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o -+obj-$(CONFIG_AMAZON_WDT) += amazon_wdt.o - - # PARISC Architecture - diff --git a/target/linux/amazon/patches-3.3/100-board.patch b/target/linux/amazon/patches-3.3/100-board.patch deleted file mode 100644 index b743052731..0000000000 --- a/target/linux/amazon/patches-3.3/100-board.patch +++ /dev/null @@ -1,53 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -120,6 +120,22 @@ config BCM63XX - help - Support for BCM63XX based boards - -+config AMAZON -+ bool "Amazon support (EXPERIMENTAL)" -+ depends on EXPERIMENTAL -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select CEVT_R4K -+ select CSRC_R4K -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_CPU_MIPS32_R2 -+ select HAVE_STD_PC_SERIAL_PORT -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_HAS_EARLY_PRINTK -+ select HW_HAS_PCI -+ select SWAP_IO_SPACE -+ - config MIPS_COBALT - bool "Cobalt Server" - select CEVT_R4K -@@ -813,6 +829,7 @@ config NLM_XLP_BOARD - - endchoice - -+source "arch/mips/amazon/Kconfig" - source "arch/mips/alchemy/Kconfig" - source "arch/mips/ath79/Kconfig" - source "arch/mips/bcm47xx/Kconfig" ---- a/arch/mips/Kbuild.platforms -+++ b/arch/mips/Kbuild.platforms -@@ -6,6 +6,7 @@ platforms += ath79 - platforms += bcm47xx - platforms += bcm63xx - platforms += cavium-octeon -+platforms += amazon - platforms += cobalt - platforms += dec - platforms += emma ---- /dev/null -+++ b/arch/mips/amazon/Platform -@@ -0,0 +1,7 @@ -+# -+# Infineon AMAZON boards -+# -+platform-$(CONFIG_AMAZON) += amazon/ -+cflags-$(CONFIG_AMAZON) += \ -+ -I$(srctree)/arch/mips/include/asm/mach-amazon -+load-$(CONFIG_AMAZON) := 0xffffffff80002000 diff --git a/target/linux/amazon/patches-3.3/130-mtd_drivers.patch b/target/linux/amazon/patches-3.3/130-mtd_drivers.patch deleted file mode 100644 index 6ce28e3fdd..0000000000 --- a/target/linux/amazon/patches-3.3/130-mtd_drivers.patch +++ /dev/null @@ -1,7 +0,0 @@ ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -57,3 +57,4 @@ obj-$(CONFIG_MTD_VMU) += vmu-flash.o - obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o - obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o - obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o -+obj-$(CONFIG_AMAZON_MTD) += amazon.o diff --git a/target/linux/amazon/patches-3.3/140-net_drivers.patch b/target/linux/amazon/patches-3.3/140-net_drivers.patch deleted file mode 100644 index 9c840e67f9..0000000000 --- a/target/linux/amazon/patches-3.3/140-net_drivers.patch +++ /dev/null @@ -1,9 +0,0 @@ ---- a/drivers/net/ethernet/Makefile -+++ b/drivers/net/ethernet/Makefile -@@ -74,3 +74,6 @@ obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundr - obj-$(CONFIG_NET_VENDOR_VIA) += via/ - obj-$(CONFIG_NET_VENDOR_XILINX) += xilinx/ - obj-$(CONFIG_NET_VENDOR_XIRCOM) += xircom/ -+ -+obj-$(CONFIG_AMAZON_NET_SW) += amazon_sw.o -+obj-$(CONFIG_ADM6996_SUPPORT) += admmod.o diff --git a/target/linux/amazon/patches-3.3/150-serial_driver.patch b/target/linux/amazon/patches-3.3/150-serial_driver.patch deleted file mode 100644 index c6e7f39bd4..0000000000 --- a/target/linux/amazon/patches-3.3/150-serial_driver.patch +++ /dev/null @@ -1,7 +0,0 @@ ---- a/drivers/tty/serial/Makefile -+++ b/drivers/tty/serial/Makefile -@@ -78,3 +78,4 @@ obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o - obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o - obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o - obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o -+obj-$(CONFIG_AMAZON_ASC_UART) += amazon_asc.o diff --git a/target/linux/amazon/patches-3.3/160-cfi-swap.patch b/target/linux/amazon/patches-3.3/160-cfi-swap.patch deleted file mode 100644 index 4a0009e432..0000000000 --- a/target/linux/amazon/patches-3.3/160-cfi-swap.patch +++ /dev/null @@ -1,56 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -1152,6 +1152,9 @@ static int __xipram do_write_oneword(str - int retry_cnt = 0; - - adr += chip->start; -+#ifdef CONFIG_AMAZON -+ adr ^= 2; -+#endif - - mutex_lock(&chip->mutex); - ret = get_chip(map, chip, adr, FL_WRITING); -@@ -1420,7 +1423,11 @@ static int __xipram do_write_buffer(stru - z = 0; - while(z < words * map_bankwidth(map)) { - datum = map_word_load(map, buf); -+#ifdef CONFIG_AMAZON -+ map_write(map, datum, (adr + z) ^ 0x2); -+#else - map_write(map, datum, adr + z); -+#endif - - z += map_bankwidth(map); - buf += map_bankwidth(map); -@@ -1665,6 +1672,9 @@ static int __xipram do_erase_oneblock(st - int ret = 0; - - adr += chip->start; -+#ifdef CONFIG_AMAZON -+ adr ^= 2; -+#endif - - mutex_lock(&chip->mutex); - ret = get_chip(map, chip, adr, FL_ERASING); -@@ -1793,6 +1803,10 @@ static int do_atmel_lock(struct map_info - struct cfi_private *cfi = map->fldrv_priv; - int ret; - -+#ifdef CONFIG_AMAZON -+ adr ^= 2; -+#endif -+ - mutex_lock(&chip->mutex); - ret = get_chip(map, chip, adr + chip->start, FL_LOCKING); - if (ret) -@@ -1828,6 +1842,10 @@ static int do_atmel_unlock(struct map_in - struct cfi_private *cfi = map->fldrv_priv; - int ret; - -+#ifdef CONFIG_AMAZON -+ adr ^= 2; -+#endif -+ - mutex_lock(&chip->mutex); - ret = get_chip(map, chip, adr + chip->start, FL_UNLOCKING); - if (ret) |