aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/adm5120/patches-2.6.37
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/adm5120/patches-2.6.37')
-rw-r--r--target/linux/adm5120/patches-2.6.37/001-adm5120.patch32
-rw-r--r--target/linux/adm5120/patches-2.6.37/002-adm5120_flash.patch21
-rw-r--r--target/linux/adm5120/patches-2.6.37/003-adm5120_switch.patch23
-rw-r--r--target/linux/adm5120/patches-2.6.37/005-adm5120_usb.patch33
-rw-r--r--target/linux/adm5120/patches-2.6.37/007-adm5120_pci.patch22
-rw-r--r--target/linux/adm5120/patches-2.6.37/009-adm5120_leds_switch_trigger.patch22
-rw-r--r--target/linux/adm5120/patches-2.6.37/101-cfi_fixup_macronix_bootloc.patch84
-rw-r--r--target/linux/adm5120/patches-2.6.37/102-jedec_pmc_39lvxxx_chips.patch68
-rw-r--r--target/linux/adm5120/patches-2.6.37/103-mtd_trxsplit.patch24
-rw-r--r--target/linux/adm5120/patches-2.6.37/120-rb153_cf_driver.patch28
-rw-r--r--target/linux/adm5120/patches-2.6.37/200-amba_pl010_hacks.patch378
-rw-r--r--target/linux/adm5120/patches-2.6.37/201-amba_bus_hacks.patch13
-rw-r--r--target/linux/adm5120/patches-2.6.37/203-gpio_leds_brightness.patch27
-rw-r--r--target/linux/adm5120/patches-2.6.37/310-adm5120_wdt.patch31
-rw-r--r--target/linux/adm5120/patches-2.6.37/901-adm5120-usb-fix-compiler-warning.patch11
-rw-r--r--target/linux/adm5120/patches-2.6.37/902-adm5120-usb-remove-dev-power-power_state.patch11
-rw-r--r--target/linux/adm5120/patches-2.6.37/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch116
-rw-r--r--target/linux/adm5120/patches-2.6.37/906-adm5120sw-mc_count-fix.patch11
-rw-r--r--target/linux/adm5120/patches-2.6.37/930-2_6_36_ports.patch119
19 files changed, 0 insertions, 1074 deletions
diff --git a/target/linux/adm5120/patches-2.6.37/001-adm5120.patch b/target/linux/adm5120/patches-2.6.37/001-adm5120.patch
deleted file mode 100644
index ddcb126b12..0000000000
--- a/target/linux/adm5120/patches-2.6.37/001-adm5120.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -29,6 +29,21 @@ choice
- prompt "System type"
- default SGI_IP22
-
-+config ADM5120
-+ bool "Infineon/ADMtek ADM5120 SoC based machines"
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_HAS_EARLY_PRINTK
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select SYS_SUPPORTS_LITTLE_ENDIAN
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select ARCH_REQUIRE_GPIOLIB
-+ select SWAP_IO_SPACE if CPU_BIG_ENDIAN
-+ select MIPS_MACHINE
-+
- config MIPS_ALCHEMY
- bool "Alchemy processor based machines"
- select 64BIT_PHYS_ADDR
-@@ -714,6 +729,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
-
- endchoice
-
-+source "arch/mips/adm5120/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
- source "arch/mips/jazz/Kconfig"
diff --git a/target/linux/adm5120/patches-2.6.37/002-adm5120_flash.patch b/target/linux/adm5120/patches-2.6.37/002-adm5120_flash.patch
deleted file mode 100644
index 3df59fd715..0000000000
--- a/target/linux/adm5120/patches-2.6.37/002-adm5120_flash.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -552,4 +552,8 @@ config MTD_PISMO
-
- When built as a module, it will be called pismo.ko
-
-+config MTD_ADM5120
-+ tristate "Map driver for ADM5120 based boards"
-+ depends on ADM5120
-+
- endmenu
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -40,6 +40,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2
- obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI) += pci.o
-+obj-$(CONFIG_MTD_ADM5120) += adm5120-flash.o
- obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312) += edb7312.o
- obj-$(CONFIG_MTD_IMPA7) += impa7.o
diff --git a/target/linux/adm5120/patches-2.6.37/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.37/003-adm5120_switch.patch
deleted file mode 100644
index 30347ae0ca..0000000000
--- a/target/linux/adm5120/patches-2.6.37/003-adm5120_switch.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -494,6 +494,10 @@ config MIPS_AU1X00_ENET
- If you have an Alchemy Semi AU1X00 based system
- say Y. Otherwise, say N.
-
-+config ADM5120_ENET
-+ tristate "ADM5120 Ethernet switch support"
-+ depends on ADM5120
-+
- config SGI_IOC3_ETH
- bool "SGI IOC3 Ethernet"
- depends on PCI && SGI_IP27
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -216,6 +216,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
- # This is also a 82596 and should probably be merged
- obj-$(CONFIG_LP486E) += lp486e.o
-
-+obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o
- obj-$(CONFIG_ETH16I) += eth16i.o
- obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
- obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
diff --git a/target/linux/adm5120/patches-2.6.37/005-adm5120_usb.patch b/target/linux/adm5120/patches-2.6.37/005-adm5120_usb.patch
deleted file mode 100644
index 8b5a553479..0000000000
--- a/target/linux/adm5120/patches-2.6.37/005-adm5120_usb.patch
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -9,6 +9,7 @@ obj-$(CONFIG_USB) += core/
- obj-$(CONFIG_USB_MON) += mon/
-
- obj-$(CONFIG_PCI) += host/
-+obj-$(CONFIG_USB_ADM5120_HCD) += host/
- obj-$(CONFIG_USB_EHCI_HCD) += host/
- obj-$(CONFIG_USB_ISP116X_HCD) += host/
- obj-$(CONFIG_USB_OHCI_HCD) += host/
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -4,6 +4,10 @@
- comment "USB Host Controller Drivers"
- depends on USB
-
-+config USB_ADM5120_HCD
-+ tristate "ADM5120 HCD support (EXPERIMENTAL)"
-+ depends on USB && ADM5120 && EXPERIMENTAL
-+
- config USB_C67X00_HCD
- tristate "Cypress C67x00 HCD support"
- depends on USB
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_USB_WHCI_HCD) += whci/
-
- obj-$(CONFIG_PCI) += pci-quirks.o
-
-+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
- obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
- obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
- obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
diff --git a/target/linux/adm5120/patches-2.6.37/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.37/007-adm5120_pci.patch
deleted file mode 100644
index 26205f804a..0000000000
--- a/target/linux/adm5120/patches-2.6.37/007-adm5120_pci.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -55,6 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capc
- obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
- obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
- obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
-+obj-$(CONFIG_ADM5120) += pci-adm5120.o
-
- ifdef CONFIG_PCI_MSI
- obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1765,6 +1765,9 @@
- #define PCI_VENDOR_ID_ESDGMBH 0x12fe
- #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
-
-+#define PCI_VENDOR_ID_ADMTEK 0x1317
-+#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120
-+
- #define PCI_VENDOR_ID_SIIG 0x131f
- #define PCI_SUBVENDOR_ID_SIIG 0x131f
- #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
diff --git a/target/linux/adm5120/patches-2.6.37/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.37/009-adm5120_leds_switch_trigger.patch
deleted file mode 100644
index 2f6eaf06e3..0000000000
--- a/target/linux/adm5120/patches-2.6.37/009-adm5120_leds_switch_trigger.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -322,4 +322,12 @@ config LEDS_TRIGGER_USBDEV
- This allows LEDs to be controlled by the presence/activity of
- an USB device. If unsure, say N.
-
-+config LEDS_TRIGGER_ADM5120_SWITCH
-+ tristate "LED ADM5120 Switch Port Status Trigger"
-+ depends on LEDS_TRIGGERS && ADM5120
-+ help
-+ This allows LEDs to be controlled by the port states of
-+ the ADM5120 built-in Ethernet Switch
-+ If unsure, say N.
-+
- endif # NEW_LEDS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -43,3 +43,4 @@ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) +=
- obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o
- obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
- obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o
-+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
diff --git a/target/linux/adm5120/patches-2.6.37/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.37/101-cfi_fixup_macronix_bootloc.patch
deleted file mode 100644
index 6c46608305..0000000000
--- a/target/linux/adm5120/patches-2.6.37/101-cfi_fixup_macronix_bootloc.patch
+++ /dev/null
@@ -1,84 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -48,6 +48,12 @@
- #define SST49LF008A 0x005a
- #define AT49BV6416 0x00d6
-
-+/* Macronix */
-+#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */
-+#define MX29LV160T 0x22C4 /* MX29LV160 Top-boot chip */
-+#define MX29LV320B 0x22A8 /* MX29LV320 Bottom-boot chip */
-+#define MX29LV320T 0x22A7 /* MX29LV320 Top-boot chip */
-+
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -345,6 +351,41 @@ static struct cfi_fixup cfi_nopri_fixup_
- { 0, 0, NULL, NULL }
- };
-
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+/*
-+ * Some Macronix chips has no/bad bootblock information in the CFI table
-+ */
-+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
-+{
-+ struct map_info *map = mtd->priv;
-+ struct cfi_private *cfi = map->fldrv_priv;
-+ struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
-+ __u8 t;
-+
-+ switch (cfi->id) {
-+ /* TODO: put affected chip ids here */
-+ case MX29LV160B:
-+ case MX29LV320B:
-+ t = 2; /* Bottom boot */
-+ break;
-+ case MX29LV160T:
-+ case MX29LV320T:
-+ t = 3; /* Top boot */
-+ break;
-+ default:
-+ return;
-+ }
-+
-+ if (extp->TopBottom == t)
-+ /* boot location detected by the CFI layer is correct */
-+ return;
-+
-+ extp->TopBottom = t;
-+ printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
-+ "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
-+}
-+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
-+
- static struct cfi_fixup cfi_fixup_table[] = {
- { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef AMD_BOOTLOC_BUG
-@@ -385,6 +426,9 @@ static struct cfi_fixup fixup_table[] =
- */
- { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
- { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+ { CFI_MFR_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
-+#endif
- { 0, 0, NULL, NULL }
- };
-
---- a/drivers/mtd/chips/Kconfig
-+++ b/drivers/mtd/chips/Kconfig
-@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD
- provides support for one of those command sets, used on chips
- including the AMD Am29LV320.
-
-+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+ bool "Fix boot-block location for Macronix flash chips"
-+ depends on MTD_CFI_AMDSTD
-+ help
-+ Some Macronix flash chips have no/wrong boot-block location in the
-+ CFI table, and the driver may detect the type incorrectly. Select
-+ this if your board has such chip.
-+
- config MTD_CFI_STAA
- tristate "Support for ST (Advanced Architecture) flash chips"
- depends on MTD_GEN_PROBE
diff --git a/target/linux/adm5120/patches-2.6.37/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.37/102-jedec_pmc_39lvxxx_chips.patch
deleted file mode 100644
index 00148fa602..0000000000
--- a/target/linux/adm5120/patches-2.6.37/102-jedec_pmc_39lvxxx_chips.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -115,6 +115,10 @@
- #define UPD29F064115 0x221C
-
- /* PMC */
-+#define PM39LV512 0x001B
-+#define PM39LV010 0x001C
-+#define PM39LV020 0x003D
-+#define PM39LV040 0x003E
- #define PM49FL002 0x006D
- #define PM49FL004 0x006E
- #define PM49FL008 0x006A
-@@ -1259,6 +1263,54 @@ static const struct amd_flash_info jedec
- ERASEINFO(0x02000,2),
- ERASEINFO(0x04000,1),
- }
-+ }, {
-+ .mfr_id = CFI_MFR_PMC,
-+ .dev_id = PM39LV512,
-+ .name = "PMC Pm39LV512",
-+ .devtypes = CFI_DEVICETYPE_X8,
-+ .uaddr = MTD_UADDR_0x0555_0x02AA,
-+ .dev_size = SIZE_64KiB,
-+ .cmd_set = P_ID_AMD_STD,
-+ .nr_regions = 1,
-+ .regions = {
-+ ERASEINFO(0x01000,16),
-+ }
-+ }, {
-+ .mfr_id = CFI_MFR_PMC,
-+ .dev_id = PM39LV010,
-+ .name = "PMC Pm39LV010",
-+ .devtypes = CFI_DEVICETYPE_X8,
-+ .uaddr = MTD_UADDR_0x0555_0x02AA,
-+ .dev_size = SIZE_128KiB,
-+ .cmd_set = P_ID_AMD_STD,
-+ .nr_regions = 1,
-+ .regions = {
-+ ERASEINFO(0x01000,32),
-+ }
-+ }, {
-+ .mfr_id = CFI_MFR_PMC,
-+ .dev_id = PM39LV020,
-+ .name = "PMC Pm39LV020",
-+ .devtypes = CFI_DEVICETYPE_X8,
-+ .uaddr = MTD_UADDR_0x0555_0x02AA,
-+ .dev_size = SIZE_256KiB,
-+ .cmd_set = P_ID_AMD_STD,
-+ .nr_regions = 1,
-+ .regions = {
-+ ERASEINFO(0x01000,64),
-+ }
-+ }, {
-+ .mfr_id = CFI_MFR_PMC,
-+ .dev_id = PM39LV040,
-+ .name = "PMC Pm39LV040",
-+ .devtypes = CFI_DEVICETYPE_X8,
-+ .uaddr = MTD_UADDR_0x0555_0x02AA,
-+ .dev_size = SIZE_512KiB,
-+ .cmd_set = P_ID_AMD_STD,
-+ .nr_regions = 1,
-+ .regions = {
-+ ERASEINFO(0x01000,128),
-+ }
- }, {
- .mfr_id = CFI_MFR_PMC,
- .dev_id = PM49FL002,
diff --git a/target/linux/adm5120/patches-2.6.37/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-2.6.37/103-mtd_trxsplit.patch
deleted file mode 100644
index ec4f6c5a40..0000000000
--- a/target/linux/adm5120/patches-2.6.37/103-mtd_trxsplit.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -63,6 +63,11 @@ config MTD_ROOTFS_SPLIT
- depends on MTD_PARTITIONS
- default y
-
-+config MTD_TRXSPLIT
-+ bool "Automatically find and split TRX partitions"
-+ depends on MTD_PARTITIONS
-+ default n
-+
- config MTD_REDBOOT_PARTS
- tristate "RedBoot partition table parsing"
- depends on MTD_PARTITIONS
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -8,6 +8,7 @@ mtd-y := mtdcore.o mtdsuper.o
- mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
-
- obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
-+obj-$(CONFIG_MTD_TRXSPLIT) += trxsplit.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
diff --git a/target/linux/adm5120/patches-2.6.37/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.37/120-rb153_cf_driver.patch
deleted file mode 100644
index 49e9340987..0000000000
--- a/target/linux/adm5120/patches-2.6.37/120-rb153_cf_driver.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -86,6 +86,7 @@ obj-$(CONFIG_PATA_PALMLD) += pata_palmld
- obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
- obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
- obj-$(CONFIG_PATA_QDI) += pata_qdi.o
-+obj-$(CONFIG_PATA_RB153_CF) += pata_rb153_cf.o
- obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
- obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
- obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -798,6 +798,15 @@ config PATA_QDI
- help
- Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
-
-+config PATA_RB153_CF
-+ tristate "RouterBOARD 153 Compact Flash support"
-+ depends on ADM5120_MACH_RB_153
-+ help
-+ This option enables support for a Compact Flash connected on
-+ the RouterBOARD 153.
-+
-+ If unsure, say N.
-+
- config PATA_RB532
- tristate "RouterBoard 532 PATA CompactFlash support"
- depends on MIKROTIK_RB532
diff --git a/target/linux/adm5120/patches-2.6.37/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.37/200-amba_pl010_hacks.patch
deleted file mode 100644
index ed494e2c3c..0000000000
--- a/target/linux/adm5120/patches-2.6.37/200-amba_pl010_hacks.patch
+++ /dev/null
@@ -1,378 +0,0 @@
---- a/drivers/serial/amba-pl010.c
-+++ b/drivers/serial/amba-pl010.c
-@@ -51,11 +51,10 @@
-
- #include <asm/io.h>
-
--#define UART_NR 8
--
- #define SERIAL_AMBA_MAJOR 204
- #define SERIAL_AMBA_MINOR 16
--#define SERIAL_AMBA_NR UART_NR
-+#define SERIAL_AMBA_NR CONFIG_SERIAL_AMBA_PL010_NUMPORTS
-+#define SERIAL_AMBA_NAME CONFIG_SERIAL_AMBA_PL010_PORTNAME
-
- #define AMBA_ISR_PASS_LIMIT 256
-
-@@ -81,9 +80,9 @@ static void pl010_stop_tx(struct uart_po
- struct uart_amba_port *uap = (struct uart_amba_port *)port;
- unsigned int cr;
-
-- cr = readb(uap->port.membase + UART010_CR);
-+ cr = __raw_readl(uap->port.membase + UART010_CR);
- cr &= ~UART010_CR_TIE;
-- writel(cr, uap->port.membase + UART010_CR);
-+ __raw_writel(cr, uap->port.membase + UART010_CR);
- }
-
- static void pl010_start_tx(struct uart_port *port)
-@@ -91,9 +90,9 @@ static void pl010_start_tx(struct uart_p
- struct uart_amba_port *uap = (struct uart_amba_port *)port;
- unsigned int cr;
-
-- cr = readb(uap->port.membase + UART010_CR);
-+ cr = __raw_readl(uap->port.membase + UART010_CR);
- cr |= UART010_CR_TIE;
-- writel(cr, uap->port.membase + UART010_CR);
-+ __raw_writel(cr, uap->port.membase + UART010_CR);
- }
-
- static void pl010_stop_rx(struct uart_port *port)
-@@ -101,9 +100,9 @@ static void pl010_stop_rx(struct uart_po
- struct uart_amba_port *uap = (struct uart_amba_port *)port;
- unsigned int cr;
-
-- cr = readb(uap->port.membase + UART010_CR);
-+ cr = __raw_readl(uap->port.membase + UART010_CR);
- cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
-- writel(cr, uap->port.membase + UART010_CR);
-+ __raw_writel(cr, uap->port.membase + UART010_CR);
- }
-
- static void pl010_enable_ms(struct uart_port *port)
-@@ -111,9 +110,9 @@ static void pl010_enable_ms(struct uart_
- struct uart_amba_port *uap = (struct uart_amba_port *)port;
- unsigned int cr;
-
-- cr = readb(uap->port.membase + UART010_CR);
-+ cr = __raw_readl(uap->port.membase + UART010_CR);
- cr |= UART010_CR_MSIE;
-- writel(cr, uap->port.membase + UART010_CR);
-+ __raw_writel(cr, uap->port.membase + UART010_CR);
- }
-
- static void pl010_rx_chars(struct uart_amba_port *uap)
-@@ -121,9 +120,9 @@ static void pl010_rx_chars(struct uart_a
- struct tty_struct *tty = uap->port.state->port.tty;
- unsigned int status, ch, flag, rsr, max_count = 256;
-
-- status = readb(uap->port.membase + UART01x_FR);
-+ status = __raw_readl(uap->port.membase + UART01x_FR);
- while (UART_RX_DATA(status) && max_count--) {
-- ch = readb(uap->port.membase + UART01x_DR);
-+ ch = __raw_readl(uap->port.membase + UART01x_DR);
- flag = TTY_NORMAL;
-
- uap->port.icount.rx++;
-@@ -132,9 +131,9 @@ static void pl010_rx_chars(struct uart_a
- * Note that the error handling code is
- * out of the main execution path
- */
-- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-+ rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
- if (unlikely(rsr & UART01x_RSR_ANY)) {
-- writel(0, uap->port.membase + UART01x_ECR);
-+ __raw_writel(0, uap->port.membase + UART01x_ECR);
-
- if (rsr & UART01x_RSR_BE) {
- rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
-@@ -164,7 +163,7 @@ static void pl010_rx_chars(struct uart_a
- uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
-
- ignore_char:
-- status = readb(uap->port.membase + UART01x_FR);
-+ status = __raw_readl(uap->port.membase + UART01x_FR);
- }
- spin_unlock(&uap->port.lock);
- tty_flip_buffer_push(tty);
-@@ -177,7 +176,7 @@ static void pl010_tx_chars(struct uart_a
- int count;
-
- if (uap->port.x_char) {
-- writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-+ __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
- uap->port.icount.tx++;
- uap->port.x_char = 0;
- return;
-@@ -189,7 +188,7 @@ static void pl010_tx_chars(struct uart_a
-
- count = uap->port.fifosize >> 1;
- do {
-- writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-+ __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- uap->port.icount.tx++;
- if (uart_circ_empty(xmit))
-@@ -207,9 +206,9 @@ static void pl010_modem_status(struct ua
- {
- unsigned int status, delta;
-
-- writel(0, uap->port.membase + UART010_ICR);
-+ __raw_writel(0, uap->port.membase + UART010_ICR);
-
-- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+ status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-
- delta = status ^ uap->old_status;
- uap->old_status = status;
-@@ -237,7 +236,7 @@ static irqreturn_t pl010_int(int irq, vo
-
- spin_lock(&uap->port.lock);
-
-- status = readb(uap->port.membase + UART010_IIR);
-+ status = __raw_readl(uap->port.membase + UART010_IIR);
- if (status) {
- do {
- if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -250,7 +249,7 @@ static irqreturn_t pl010_int(int irq, vo
- if (pass_counter-- == 0)
- break;
-
-- status = readb(uap->port.membase + UART010_IIR);
-+ status = __raw_readl(uap->port.membase + UART010_IIR);
- } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
- UART010_IIR_TIS));
- handled = 1;
-@@ -264,7 +263,7 @@ static irqreturn_t pl010_int(int irq, vo
- static unsigned int pl010_tx_empty(struct uart_port *port)
- {
- struct uart_amba_port *uap = (struct uart_amba_port *)port;
-- unsigned int status = readb(uap->port.membase + UART01x_FR);
-+ unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
- return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
- }
-
-@@ -274,7 +273,7 @@ static unsigned int pl010_get_mctrl(stru
- unsigned int result = 0;
- unsigned int status;
-
-- status = readb(uap->port.membase + UART01x_FR);
-+ status = __raw_readl(uap->port.membase + UART01x_FR);
- if (status & UART01x_FR_DCD)
- result |= TIOCM_CAR;
- if (status & UART01x_FR_DSR)
-@@ -300,12 +299,12 @@ static void pl010_break_ctl(struct uart_
- unsigned int lcr_h;
-
- spin_lock_irqsave(&uap->port.lock, flags);
-- lcr_h = readb(uap->port.membase + UART010_LCRH);
-+ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
- if (break_state == -1)
- lcr_h |= UART01x_LCRH_BRK;
- else
- lcr_h &= ~UART01x_LCRH_BRK;
-- writel(lcr_h, uap->port.membase + UART010_LCRH);
-+ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
- spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-
-@@ -333,12 +332,12 @@ static int pl010_startup(struct uart_por
- /*
- * initialise the old status of the modem signals
- */
-- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+ uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-
- /*
- * Finally, enable interrupts
- */
-- writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-+ __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
- uap->port.membase + UART010_CR);
-
- return 0;
-@@ -361,10 +360,10 @@ static void pl010_shutdown(struct uart_p
- /*
- * disable all interrupts, disable the port
- */
-- writel(0, uap->port.membase + UART010_CR);
-+ __raw_writel(0, uap->port.membase + UART010_CR);
-
- /* disable break condition and fifos */
-- writel(readb(uap->port.membase + UART010_LCRH) &
-+ __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
- ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
- uap->port.membase + UART010_LCRH);
-
-@@ -386,7 +385,7 @@ pl010_set_termios(struct uart_port *port
- /*
- * Ask the core to calculate the divisor for us.
- */
-- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
-+ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
- quot = uart_get_divisor(port, baud);
-
- switch (termios->c_cflag & CSIZE) {
-@@ -449,25 +448,25 @@ pl010_set_termios(struct uart_port *port
- uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
-
- /* first, disable everything */
-- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-+ old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-
- if (UART_ENABLE_MS(port, termios->c_cflag))
- old_cr |= UART010_CR_MSIE;
-
-- writel(0, uap->port.membase + UART010_CR);
-+ __raw_writel(0, uap->port.membase + UART010_CR);
-
- /* Set baud rate */
- quot -= 1;
-- writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
-- writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-+ __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
-+ __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-
- /*
- * ----------v----------v----------v----------v-----
- * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
- * ----------^----------^----------^----------^-----
- */
-- writel(lcr_h, uap->port.membase + UART010_LCRH);
-- writel(old_cr, uap->port.membase + UART010_CR);
-+ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-+ __raw_writel(old_cr, uap->port.membase + UART010_CR);
-
- spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -549,7 +548,7 @@ static struct uart_ops amba_pl010_pops =
- .verify_port = pl010_verify_port,
- };
-
--static struct uart_amba_port *amba_ports[UART_NR];
-+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
-
- #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
-
-@@ -559,10 +558,10 @@ static void pl010_console_putchar(struct
- unsigned int status;
-
- do {
-- status = readb(uap->port.membase + UART01x_FR);
-+ status = __raw_readl(uap->port.membase + UART01x_FR);
- barrier();
- } while (!UART_TX_READY(status));
-- writel(ch, uap->port.membase + UART01x_DR);
-+ __raw_writel(ch, uap->port.membase + UART01x_DR);
- }
-
- static void
-@@ -576,8 +575,8 @@ pl010_console_write(struct console *co,
- /*
- * First save the CR then disable the interrupts
- */
-- old_cr = readb(uap->port.membase + UART010_CR);
-- writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-+ old_cr = __raw_readl(uap->port.membase + UART010_CR);
-+ __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-
- uart_console_write(&uap->port, s, count, pl010_console_putchar);
-
-@@ -586,10 +585,10 @@ pl010_console_write(struct console *co,
- * and restore the TCR
- */
- do {
-- status = readb(uap->port.membase + UART01x_FR);
-+ status = __raw_readl(uap->port.membase + UART01x_FR);
- barrier();
- } while (status & UART01x_FR_BUSY);
-- writel(old_cr, uap->port.membase + UART010_CR);
-+ __raw_writel(old_cr, uap->port.membase + UART010_CR);
-
- clk_disable(uap->clk);
- }
-@@ -598,9 +597,9 @@ static void __init
- pl010_console_get_options(struct uart_amba_port *uap, int *baud,
- int *parity, int *bits)
- {
-- if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-+ if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
- unsigned int lcr_h, quot;
-- lcr_h = readb(uap->port.membase + UART010_LCRH);
-+ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
-
- *parity = 'n';
- if (lcr_h & UART01x_LCRH_PEN) {
-@@ -615,8 +614,8 @@ pl010_console_get_options(struct uart_am
- else
- *bits = 8;
-
-- quot = readb(uap->port.membase + UART010_LCRL) |
-- readb(uap->port.membase + UART010_LCRM) << 8;
-+ quot = __raw_readl(uap->port.membase + UART010_LCRL) |
-+ __raw_readl(uap->port.membase + UART010_LCRM) << 8;
- *baud = uap->port.uartclk / (16 * (quot + 1));
- }
- }
-@@ -634,7 +633,7 @@ static int __init pl010_console_setup(st
- * if so, search for the first available port that does have
- * console support.
- */
-- if (co->index >= UART_NR)
-+ if (co->index >= SERIAL_AMBA_NR)
- co->index = 0;
- uap = amba_ports[co->index];
- if (!uap)
-@@ -652,7 +651,7 @@ static int __init pl010_console_setup(st
-
- static struct uart_driver amba_reg;
- static struct console amba_console = {
-- .name = "ttyAM",
-+ .name = SERIAL_AMBA_NAME,
- .write = pl010_console_write,
- .device = uart_console_device,
- .setup = pl010_console_setup,
-@@ -668,11 +667,11 @@ static struct console amba_console = {
-
- static struct uart_driver amba_reg = {
- .owner = THIS_MODULE,
-- .driver_name = "ttyAM",
-- .dev_name = "ttyAM",
-+ .driver_name = SERIAL_AMBA_NAME,
-+ .dev_name = SERIAL_AMBA_NAME,
- .major = SERIAL_AMBA_MAJOR,
- .minor = SERIAL_AMBA_MINOR,
-- .nr = UART_NR,
-+ .nr = SERIAL_AMBA_NR,
- .cons = AMBA_CONSOLE,
- };
-
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -276,10 +276,25 @@ config SERIAL_AMBA_PL010
- help
- This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
- an Integrator/AP or Integrator/PP2 platform, or if you have a
-- Cirrus Logic EP93xx CPU, say Y or M here.
-+ Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
-
- If unsure, say N.
-
-+config SERIAL_AMBA_PL010_NUMPORTS
-+ int "Maximum number of AMBA PL010 serial ports"
-+ depends on SERIAL_AMBA_PL010
-+ default "8"
-+ ---help---
-+ Set this to the number of serial ports you want the AMBA PL010 driver
-+ to support.
-+
-+config SERIAL_AMBA_PL010_PORTNAME
-+ string "Name of the AMBA PL010 serial ports"
-+ depends on SERIAL_AMBA_PL010
-+ default "ttyAM"
-+ ---help---
-+ ::: To be written :::
-+
- config SERIAL_AMBA_PL010_CONSOLE
- bool "Support for console on AMBA serial port"
- depends on SERIAL_AMBA_PL010=y
diff --git a/target/linux/adm5120/patches-2.6.37/201-amba_bus_hacks.patch b/target/linux/adm5120/patches-2.6.37/201-amba_bus_hacks.patch
deleted file mode 100644
index 9db3e55adb..0000000000
--- a/target/linux/adm5120/patches-2.6.37/201-amba_bus_hacks.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/amba/bus.c
-+++ b/drivers/amba/bus.c
-@@ -18,6 +18,10 @@
- #include <asm/irq.h>
- #include <asm/sizes.h>
-
-+#ifndef NO_IRQ
-+#define NO_IRQ (-1)
-+#endif
-+
- #define to_amba_device(d) container_of(d, struct amba_device, dev)
- #define to_amba_driver(d) container_of(d, struct amba_driver, drv)
-
diff --git a/target/linux/adm5120/patches-2.6.37/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-2.6.37/203-gpio_leds_brightness.patch
deleted file mode 100644
index ac3c516353..0000000000
--- a/target/linux/adm5120/patches-2.6.37/203-gpio_leds_brightness.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/leds/leds-gpio.c
-+++ b/drivers/leds/leds-gpio.c
-@@ -52,13 +52,17 @@ static void gpio_led_set(struct led_clas
- container_of(led_cdev, struct gpio_led_data, cdev);
- int level;
-
-- if (value == LED_OFF)
-- level = 0;
-- else
-- level = 1;
--
-- if (led_dat->active_low)
-- level = !level;
-+ switch (value) {
-+ case LED_OFF:
-+ level = led_dat->active_low ? 1 : 0;
-+ break;
-+ case LED_FULL:
-+ level = led_dat->active_low ? 0 : 1;
-+ break;
-+ default:
-+ level = value;
-+ break;
-+ }
-
- /* Setting GPIOs with I2C/etc requires a task context, and we don't
- * seem to have a reliable way to know if we're already in one; so
diff --git a/target/linux/adm5120/patches-2.6.37/310-adm5120_wdt.patch b/target/linux/adm5120/patches-2.6.37/310-adm5120_wdt.patch
deleted file mode 100644
index 3a6cf5be01..0000000000
--- a/target/linux/adm5120/patches-2.6.37/310-adm5120_wdt.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -849,6 +849,18 @@ config RC32434_WDT
- To compile this driver as a module, choose M here: the
- module will be called rc32434_wdt.
-
-+config ADM5120_WDT
-+ tristate "Infineon ADM5120 SoC hardware watchdog"
-+ depends on WATCHDOG && ADM5120
-+ help
-+ This is a driver for hardware watchdog integrated in Infineon
-+ ADM5120 SoC. This watchdog simply watches your kernel to make sure
-+ it doesn't freeze, and if it does, it reboots your computer after a
-+ certain amount of time.
-+
-+ To compile this driver as a module, choose M here: the module will be
-+ called adm5120_wdt.
-+
- config INDYDOG
- tristate "Indy/I2 Hardware Watchdog"
- depends on SGI_HAS_INDYDOG
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -111,6 +111,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc
- obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o
- obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o
- obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
-+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
- obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
diff --git a/target/linux/adm5120/patches-2.6.37/901-adm5120-usb-fix-compiler-warning.patch b/target/linux/adm5120/patches-2.6.37/901-adm5120-usb-fix-compiler-warning.patch
deleted file mode 100644
index 93149df401..0000000000
--- a/target/linux/adm5120/patches-2.6.37/901-adm5120-usb-fix-compiler-warning.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/usb/host/adm5120-dbg.c
-+++ b/drivers/usb/host/adm5120-dbg.c
-@@ -133,7 +133,7 @@ urb_print(struct admhcd *ahcd, struct ur
-
- #define admhc_dbg_sw(ahcd, next, size, format, arg...) \
- do { \
-- if (next) { \
-+ if (next != NULL) { \
- unsigned s_len; \
- s_len = scnprintf(*next, *size, format, ## arg ); \
- *size -= s_len; *next += s_len; \
diff --git a/target/linux/adm5120/patches-2.6.37/902-adm5120-usb-remove-dev-power-power_state.patch b/target/linux/adm5120/patches-2.6.37/902-adm5120-usb-remove-dev-power-power_state.patch
deleted file mode 100644
index 4fd0283f41..0000000000
--- a/target/linux/adm5120/patches-2.6.37/902-adm5120-usb-remove-dev-power-power_state.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/usb/host/adm5120-dbg.c
-+++ b/drivers/usb/host/adm5120-dbg.c
-@@ -642,7 +642,7 @@ static ssize_t fill_registers_buffer(str
- hcd->product_desc,
- hcd_name);
-
-- if (bus->controller->power.power_state.event) {
-+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
- size -= scnprintf(next, size,
- "SUSPENDED (no register access)\n");
- goto done;
diff --git a/target/linux/adm5120/patches-2.6.37/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch b/target/linux/adm5120/patches-2.6.37/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch
deleted file mode 100644
index aa50f8c48b..0000000000
--- a/target/linux/adm5120/patches-2.6.37/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch
+++ /dev/null
@@ -1,116 +0,0 @@
---- a/drivers/usb/host/adm5120-dbg.c
-+++ b/drivers/usb/host/adm5120-dbg.c
-@@ -419,7 +419,7 @@ static struct dentry *admhc_debug_root;
-
- struct debug_buffer {
- ssize_t (*fill_func)(struct debug_buffer *); /* fill method */
-- struct device *dev;
-+ struct admhcd *ahcd;
- struct mutex mutex; /* protect filling of buffer */
- size_t count; /* number of characters filled into buffer */
- char *page;
-@@ -494,15 +494,11 @@ show_list(struct admhcd *ahcd, char *buf
-
- static ssize_t fill_async_buffer(struct debug_buffer *buf)
- {
-- struct usb_bus *bus;
-- struct usb_hcd *hcd;
- struct admhcd *ahcd;
- size_t temp;
- unsigned long flags;
-
-- bus = dev_get_drvdata(buf->dev);
-- hcd = bus_to_hcd(bus);
-- ahcd = hcd_to_admhcd(hcd);
-+ ahcd = buf->ahcd;
-
- spin_lock_irqsave(&ahcd->lock, flags);
- temp = show_list(ahcd, buf->page, PAGE_SIZE, ahcd->ed_head);
-@@ -516,8 +512,6 @@ static ssize_t fill_async_buffer(struct
-
- static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
- {
-- struct usb_bus *bus;
-- struct usb_hcd *hcd;
- struct admhcd *ahcd;
- struct ed **seen, *ed;
- unsigned long flags;
-@@ -529,9 +523,7 @@ static ssize_t fill_periodic_buffer(stru
- return 0;
- seen_count = 0;
-
-- bus = dev_get_drvdata(buf->dev);
-- hcd = bus_to_hcd(bus);
-- ahcd = hcd_to_admhcd(hcd);
-+ ahcd = buf->ahcd;
- next = buf->page;
- size = PAGE_SIZE;
-
-@@ -613,7 +605,6 @@ static ssize_t fill_periodic_buffer(stru
-
- static ssize_t fill_registers_buffer(struct debug_buffer *buf)
- {
-- struct usb_bus *bus;
- struct usb_hcd *hcd;
- struct admhcd *ahcd;
- struct admhcd_regs __iomem *regs;
-@@ -622,9 +613,8 @@ static ssize_t fill_registers_buffer(str
- char *next;
- u32 rdata;
-
-- bus = dev_get_drvdata(buf->dev);
-- hcd = bus_to_hcd(bus);
-- ahcd = hcd_to_admhcd(hcd);
-+ ahcd = buf->ahcd;
-+ hcd = admhcd_to_hcd(ahcd);
- regs = ahcd->regs;
- next = buf->page;
- size = PAGE_SIZE;
-@@ -689,7 +679,7 @@ done:
- }
-
-
--static struct debug_buffer *alloc_buffer(struct device *dev,
-+static struct debug_buffer *alloc_buffer(struct admhcd *ahcd,
- ssize_t (*fill_func)(struct debug_buffer *))
- {
- struct debug_buffer *buf;
-@@ -697,7 +687,7 @@ static struct debug_buffer *alloc_buffer
- buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
-
- if (buf) {
-- buf->dev = dev;
-+ buf->ahcd = ahcd;
- buf->fill_func = fill_func;
- mutex_init(&buf->mutex);
- }
-@@ -790,26 +780,25 @@ static int debug_registers_open(struct i
- static inline void create_debug_files(struct admhcd *ahcd)
- {
- struct usb_bus *bus = &admhcd_to_hcd(ahcd)->self;
-- struct device *dev = bus->dev;
-
- ahcd->debug_dir = debugfs_create_dir(bus->bus_name, admhc_debug_root);
- if (!ahcd->debug_dir)
- goto dir_error;
-
- ahcd->debug_async = debugfs_create_file("async", S_IRUGO,
-- ahcd->debug_dir, dev,
-+ ahcd->debug_dir, ahcd,
- &debug_async_fops);
- if (!ahcd->debug_async)
- goto async_error;
-
- ahcd->debug_periodic = debugfs_create_file("periodic", S_IRUGO,
-- ahcd->debug_dir, dev,
-+ ahcd->debug_dir, ahcd,
- &debug_periodic_fops);
- if (!ahcd->debug_periodic)
- goto periodic_error;
-
- ahcd->debug_registers = debugfs_create_file("registers", S_IRUGO,
-- ahcd->debug_dir, dev,
-+ ahcd->debug_dir, ahcd,
- &debug_registers_fops);
- if (!ahcd->debug_registers)
- goto registers_error;
diff --git a/target/linux/adm5120/patches-2.6.37/906-adm5120sw-mc_count-fix.patch b/target/linux/adm5120/patches-2.6.37/906-adm5120sw-mc_count-fix.patch
deleted file mode 100644
index cb1b376da7..0000000000
--- a/target/linux/adm5120/patches-2.6.37/906-adm5120sw-mc_count-fix.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/net/adm5120sw.c
-+++ b/drivers/net/adm5120sw.c
-@@ -937,7 +937,7 @@ static void adm5120_if_set_multicast_lis
- t |= (ports << CPUP_CONF_DUNP_SHIFT);
-
- if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
-- dev->mc_count)
-+ netdev_mc_count(dev))
- /* enable multicast packets */
- t &= ~(ports << CPUP_CONF_DMCP_SHIFT);
- else
diff --git a/target/linux/adm5120/patches-2.6.37/930-2_6_36_ports.patch b/target/linux/adm5120/patches-2.6.37/930-2_6_36_ports.patch
deleted file mode 100644
index 1e51c4717e..0000000000
--- a/target/linux/adm5120/patches-2.6.37/930-2_6_36_ports.patch
+++ /dev/null
@@ -1,119 +0,0 @@
---- a/arch/mips/include/asm/war.h
-+++ b/arch/mips/include/asm/war.h
-@@ -9,7 +9,7 @@
- #ifndef _ASM_WAR_H
- #define _ASM_WAR_H
-
--#include <war.h>
-+#include <asm/mach-adm5120/war.h>
-
- /*
- * Work around certain R4000 CPU errata (as implemented by GCC):
---- a/drivers/amba/bus.c
-+++ b/drivers/amba/bus.c
-@@ -16,7 +16,7 @@
- #include <linux/amba/bus.h>
-
- #include <asm/irq.h>
--#include <asm/sizes.h>
-+#include <asm/mach-adm5120/asm/sizes.h>
-
- #ifndef NO_IRQ
- #define NO_IRQ (-1)
---- a/drivers/watchdog/adm5120_wdt.c
-+++ b/drivers/watchdog/adm5120_wdt.c
-@@ -167,7 +167,7 @@ static struct file_operations wdt_fops =
- owner: THIS_MODULE,
- llseek: no_llseek,
- write: wdt_write,
-- ioctl: wdt_ioctl,
-+ unlocked_ioctl: wdt_ioctl,
- open: wdt_open,
- release: wdt_release,
- };
---- a/arch/mips/Kbuild.platforms
-+++ b/arch/mips/Kbuild.platforms
-@@ -1,5 +1,6 @@
- # All platforms listed in alphabetic order
-
-+platforms += adm5120
- platforms += alchemy
- platforms += ar7
- platforms += bcm47xx
---- a/drivers/net/adm5120sw.c
-+++ b/drivers/net/adm5120sw.c
-@@ -26,6 +26,7 @@
- #include <linux/platform_device.h>
- #include <linux/io.h>
- #include <linux/irq.h>
-+#include <asm/mach-adm5120/irq.h>
-
- #include <linux/netdevice.h>
- #include <linux/etherdevice.h>
---- a/arch/mips/adm5120/common/clock.c
-+++ b/arch/mips/adm5120/common/clock.c
-@@ -33,7 +33,7 @@ static struct clk uart_clk = {
-
- struct clk *clk_get(struct device *dev, const char *id)
- {
-- char *name = dev_name(dev);
-+ const char *name = dev_name(dev);
-
- if (!strcmp(name, "apb:uart0") || !strcmp(name, "apb:uart1"))
- return &uart_clk;
---- /dev/null
-+++ b/arch/mips/adm5120/Platform
-@@ -0,0 +1,53 @@
-+#
-+# Core Infineon/ADMtek ADM5120
-+#
-+platform-$(CONFIG_ADM5120) += adm5120/common/
-+
-+#
-+# OEM CELLVISION
-+#
-+platform-$(CONFIG_ADM5120_OEM_CELLVISION) += adm5120/cellvision/
-+
-+#
-+# OEM COMPEX
-+#
-+platform-$(CONFIG_ADM5120_OEM_COMPEX) += adm5120/compex/
-+
-+#
-+# OEM EDIMAX
-+#
-+platform-$(CONFIG_ADM5120_OEM_EDIMAX) += adm5120/edimax/
-+
-+#
-+# OEM GENERIC
-+#
-+platform-$(CONFIG_ADM5120_OEM_GENERIC) += adm5120/generic/
-+
-+#
-+# OEM INFINEON
-+#
-+platform-$(CONFIG_ADM5120_OEM_INFINEON) += adm5120/infineon/
-+
-+#
-+# OEM MIKROTIK
-+#
-+platform-$(CONFIG_ADM5120_OEM_MIKROTIK) += adm5120/mikrotik/
-+
-+#
-+# OEM MOTOROLA
-+#
-+platform-$(CONFIG_ADM5120_OEM_MOTOROLA) += adm5120/motorola/
-+
-+#
-+# OEM OSBRIDGE
-+#
-+platform-$(CONFIG_ADM5120_OEM_OSBRIDGE) += adm5120/osbridge/
-+
-+#
-+# OEM ZYXEL
-+#
-+platform-$(CONFIG_ADM5120_OEM_ZYXEL) += adm5120/zyxel/
-+
-+cflags-$(CONFIG_ADM5120) += -I$(srctree)/arch/mips/include/asm/mach-adm5120
-+libs-$(CONFIG_ADM5120) += arch/mips/adm5120/prom/
-+load-$(CONFIG_ADM5120) += 0xffffffff80001000