diff options
Diffstat (limited to 'target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_switch.h')
| -rw-r--r-- | target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_switch.h | 89 |
1 files changed, 89 insertions, 0 deletions
diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_switch.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_switch.h new file mode 100644 index 0000000000..52ea79e7ab --- /dev/null +++ b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_switch.h @@ -0,0 +1,89 @@ +/* + * ADM5120 ethernet switch definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in Ethernet switch. + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _ADM5120_SWITCH_H +#define _ADM5120_SWITCH_H + +#define BITMASK(len) ((1 << (len))-1) +#define ONEBIT(at) (1 << (at)) + +/* Switch register offsets */ +#define SWITCH_REG_CODE 0x0000 +#define SWITCH_REG_SOFT_RESET 0x0004 +#define SWITCH_REG_MEMCTRL 0x001C +#define SWITCH_REG_CPUP_CONF 0x0024 +#define SWITCH_REG_PORT_CONF0 0x0028 +#define SWITCH_REG_PORT_CONF1 0x002C +#define SWITCH_REG_PORT_CONF2 0x0030 +#define SWITCH_REG_VLAN_G1 0x0040 +#define SWITCH_REG_VLAN_G2 0x0044 +#define SWITCH_REG_SEND_TRIG 0x0048 +#define SWITCH_REG_MAC_WT0 0x0058 +#define SWITCH_REG_MAC_WT1 0x005C +#define SWITCH_REG_PHY_CNTL0 0x0068 +#define SWITCH_REG_PHY_CNTL1 0x006C +#define SWITCH_REG_PHY_CNTL2 0x007C +#define SWITCH_REG_PHY_CNTL3 0x0080 +#define SWITCH_REG_PRI_CNTL 0x0084 +#define SWITCH_REG_INT_STATUS 0x00B0 +#define SWITCH_REG_INT_MASK 0x00B4 +#define SWITCH_REG_GPIO_CONF0 0x00B8 +#define SWITCH_REG_GPIO_CONF2 0x00BC +#define SWITCH_REG_WDOG0 0x00C0 +#define SWITCH_REG_WDOG1 0x00C4 +#define SWITCH_REG_PHY_CNTL4 0x00A0 + +#define SWITCH_REG_SEND_HBADDR 0x00D0 +#define SWITCH_REG_SEND_LBADDR 0x00D4 +#define SWITCH_REG_RECV_HBADDR 0x00D8 +#define SWITCH_REG_RECV_LBADDR 0x00DC + +#define SWITCH_REG_TIMER_INT 0x00F0 +#define SWITCH_REG_TIMER 0x00F4 + +#define SWITCH_REG_PORT0_LED 0x0100 +#define SWITCH_REG_PORT1_LED 0x0104 +#define SWITCH_REG_PORT2_LED 0x0108 +#define SWITCH_REG_PORT3_LED 0x010C +#define SWITCH_REG_PORT4_LED 0x0110 + +/* CODE register bits */ +#define CODE_PC_MASK BITMASK(16) /* Product Code */ +#define CODE_REV_SHIFT 16 +#define CODE_REV_MASK BITMASK(4) /* Product Revision */ +#define CODE_CLKS_SHIFT 20 +#define CODE_CLKS_MASK BITMASK(2) /* Clock Speed */ +#define CODE_CLKS_175 0 /* 175 MHz */ +#define CODE_CLKS_200 1 /* 200 MHz */ +#define CODE_CLKS_225 2 /* 225 MHz */ +#define CODE_CLKS_250 3 /* 250 MHz */ +#define CODE_NAB ONEBIT(24) /* NAND boot */ +#define CODE_PK_MASK BITMASK(1) /* Package type */ +#define CODE_PK_SHIFT 29 +#define CODE_PK_BGA 0 /* BGA package */ +#define CODE_PK_PQFP 1 /* PQFP package */ + + +#endif /* _ADM5120_SWITCH_H */ |