diff options
Diffstat (limited to 'package')
| -rw-r--r-- | package/unvram/Makefile | 9 | ||||
| -rwxr-xr-x | package/unvram/files/nvram.init | 75 | ||||
| -rw-r--r-- | package/unvram/src/Makefile | 4 |
3 files changed, 83 insertions, 5 deletions
diff --git a/package/unvram/Makefile b/package/unvram/Makefile index c62873e6fb..fa8f661756 100644 --- a/package/unvram/Makefile +++ b/package/unvram/Makefile @@ -8,7 +8,7 @@ include $(TOPDIR)/rules.mk PKG_NAME:=unvram -PKG_RELEASE:=3 +PKG_RELEASE:=4 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME) @@ -18,6 +18,7 @@ define Package/unvram SECTION:=utils CATEGORY:=Base system TITLE:=Userspace port of the Broadcom NVRAM manipulation tool + DEPENDS:=@TARGET_brcm_2_4||@TARGET_brcm47xx endef define Package/unvram/description @@ -41,8 +42,10 @@ define Build/Compile endef define Package/unvram/install - $(INSTALL_DIR) $(1)/sbin - $(INSTALL_BIN) $(PKG_BUILD_DIR)/unvram $(1)/sbin/ + $(INSTALL_DIR) $(1)/etc/init.d + $(INSTALL_BIN) ./files/nvram.init $(1)/etc/init.d/nvram + $(INSTALL_DIR) $(1)/usr/sbin + $(INSTALL_BIN) $(PKG_BUILD_DIR)/nvram $(1)/usr/sbin/ $(INSTALL_DIR) $(1)/usr/lib $(INSTALL_BIN) $(PKG_BUILD_DIR)/libnvram.so.0.1 $(1)/usr/lib/ endef diff --git a/package/unvram/files/nvram.init b/package/unvram/files/nvram.init new file mode 100755 index 0000000000..fcfa7f65e9 --- /dev/null +++ b/package/unvram/files/nvram.init @@ -0,0 +1,75 @@ +#!/bin/sh /etc/rc.common +# NVRAM setup +# +# This file handles the NVRAM quirks of various hardware. + +START=02 +alias debug=${DEBUG:-:} + +nvram_default() { + [ -z "$(nvram get $1)" ] && nvram set "$1=$2" +} + +nvram_set() { # for the linksys fixup part + [ "$(nvram get "$1")" = "$2" -a "$2" != "" ] || { + COMMIT=1 + /usr/sbin/nvram set "$1=$2" + } +} + +fixup_linksys() { + # work around braindead CFE defaults in linksys routers + boardtype=$(nvram get boardtype) + boardnum=$(nvram get boardnum) + boardflags=$(($(nvram get boardflags))) + adm_switch="$(( ($boardflags & 0x80) >> 7 ))" + + [ -n "$(nvram get vxkilled)" ] && boardtype=0 # don't mess with the ram settings on the hacked cfe + case "$(( $boardtype ))" in + "1800") #0x708 + if [ "$adm_switch" = 0 ]; then + nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))" + [ "$COMMIT" = 1 ] && { + nvram_set clkfreq 216 + nvram_set sdram_ncdl 0x0 + nvram_set pa0itssit 62 + nvram_set pa0b0 0x15eb + nvram_set pa0b1 0xfa82 + nvram_set pa0b2 0xfe66 + nvram_set pa0maxpwr 0x4e + } + fi + ;; + "1127") #0x467 + nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))" + [ "$COMMIT" = 1 ] && { + nvram_set sdram_ncdl 0x0 + nvram_set pa0itssit 62 + nvram_set pa0b0 0x168b + nvram_set pa0b1 0xfabf + nvram_set pa0b2 0xfeaf + nvram_set pa0maxpwr 0x4e + } + ;; + "1071") #0x042f + nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0009 )))" + [ "$COMMIT" = 1 ] && { + nvram_set sdram_ncdl 0x0 + } + esac + [ "$COMMIT" = "1" ] && nvram commit +} + +start() { + fixup_linksys + + # OFDM Power Offset is set incorrectly on many boards. + # Setting it to 0 will increase the tx power to normal levels. + nvram_set opo 0x0 + + [ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && { + # if default wifi mac, set two higher than the lan mac + nvram set il0macaddr=$(nvram get et0macaddr| + awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}') + } +} diff --git a/package/unvram/src/Makefile b/package/unvram/src/Makefile index 7f92aa8b83..4872728baf 100644 --- a/package/unvram/src/Makefile +++ b/package/unvram/src/Makefile @@ -1,4 +1,4 @@ -CLI_FILENAME = unvram +CLI_FILENAME = nvram LIB_VERMAJOR = 0 LIB_VERMINOR = 1 @@ -30,4 +30,4 @@ libnvram: -o $(LIB_FILENAME).$(LIB_VERMAJOR).$(LIB_VERMINOR) $(LIB_OBJ) clean: - rm -f nvram $(LIB_FILENAME)* *.o + rm -f $(CLI_FILENAME) $(LIB_FILENAME)* *.o |