aboutsummaryrefslogtreecommitdiffstats
path: root/package
diff options
context:
space:
mode:
Diffstat (limited to 'package')
-rw-r--r--package/network/utils/iw/patches/001-nl80211_h_sync.patch159
-rw-r--r--package/network/utils/iw/patches/120-antenna_gain.patch2
2 files changed, 137 insertions, 24 deletions
diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
index cbae38abcb..3a263686a9 100644
--- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch
+++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
@@ -33,7 +33,32 @@
* Background scan period can optionally be
* specified in %NL80211_ATTR_BG_SCAN_PERIOD,
* if not specified default background scan configuration
-@@ -1555,6 +1566,22 @@ enum nl80211_commands {
+@@ -492,6 +503,9 @@
+ * TX status event pertaining to the TX request.
+ * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
+ * management frames at CCK rate or not in 2GHz band.
++ * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA
++ * counters which will be updated to the current value. This attribute
++ * is used during CSA period.
+ * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
+ * command may be used with the corresponding cookie to cancel the wait
+ * time if it is known that it is no longer necessary.
+@@ -1514,10 +1528,10 @@ enum nl80211_commands {
+ * operation).
+ * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
+ * for the time while performing a channel switch.
+- * @NL80211_ATTR_CSA_C_OFF_BEACON: Offset of the channel switch counter
+- * field in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
+- * @NL80211_ATTR_CSA_C_OFF_PRESP: Offset of the channel switch counter
+- * field in the probe response (%NL80211_ATTR_PROBE_RESP).
++ * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel
++ * switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
++ * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel
++ * switch counters in the probe response (%NL80211_ATTR_PROBE_RESP).
+ *
+ * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32.
+ * As specified in the &enum nl80211_rxmgmt_flags.
+@@ -1555,6 +1569,31 @@ enum nl80211_commands {
* data is in the format defined for the payload of the QoS Map Set element
* in IEEE Std 802.11-2012, 8.4.2.97.
*
@@ -47,16 +72,25 @@
+ * advertise values that cannot always be met. In such cases, an attempt
+ * to add a new station entry with @NL80211_CMD_NEW_STATION may fail.
+ *
++ * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which
++ * should be updated when the frame is transmitted.
++ * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum
++ * supported number of csa counters.
++ *
+ * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
+ * As specified in the &enum nl80211_tdls_peer_capability.
+ *
++ * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface
++ * creation then the new interface will be owned by the netlink socket
++ * that created it and will be destroyed when the socket is closed
++ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ * transmit power to stay within regulatory limits. u32, dBi.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
-@@ -1883,6 +1910,15 @@ enum nl80211_attrs {
+@@ -1883,6 +1922,20 @@ enum nl80211_attrs {
NL80211_ATTR_QOS_MAP,
@@ -67,28 +101,65 @@
+
+ NL80211_ATTR_TDLS_PEER_CAPABILITY,
+
++ NL80211_ATTR_IFACE_SOCKET_OWNER,
++
++ NL80211_ATTR_CSA_C_OFFSETS_TX,
++ NL80211_ATTR_MAX_CSA_COUNTERS,
++
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
-@@ -2304,6 +2340,7 @@ enum nl80211_band_attr {
+@@ -2304,9 +2357,35 @@ enum nl80211_band_attr {
* @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel
* using this channel as the primary or any of the secondary channels
* isn't possible
+ * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
++ * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this
++ * channel. A channel that has the INDOOR_ONLY attribute can only be
++ * used when there is a clear assessment that the device is operating in
++ * an indoor surroundings, i.e., it is connected to AC power (and not
++ * through portable DC inverters) or is under the control of a master
++ * that is acting as an AP and is connected to AC power.
++ * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this
++ * channel if it's connected concurrently to a BSS on the same channel on
++ * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz
++ * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a
++ * channel that has the GO_CONCURRENT attribute set can be done when there
++ * is a clear assessment that the device is operating under the guidance of
++ * an authorized master, i.e., setting up a GO while the device is also
++ * connected to an AP with DFS and radar detection on the UNII band (it is
++ * up to user-space, i.e., wpa_supplicant to perform the required
++ * verifications)
++ * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed
++ * on this channel in current regulatory domain.
++ * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
++ * on this channel in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
* currently defined
* @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
-@@ -2322,6 +2359,7 @@ enum nl80211_frequency_attr {
++ *
++ * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122
++ * for more information on the FCC description of the relaxations allowed
++ * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and
++ * NL80211_FREQUENCY_ATTR_GO_CONCURRENT.
+ */
+ enum nl80211_frequency_attr {
+ __NL80211_FREQUENCY_ATTR_INVALID,
+@@ -2322,6 +2401,11 @@ enum nl80211_frequency_attr {
NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,
NL80211_FREQUENCY_ATTR_NO_80MHZ,
NL80211_FREQUENCY_ATTR_NO_160MHZ,
+ NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
++ NL80211_FREQUENCY_ATTR_INDOOR_ONLY,
++ NL80211_FREQUENCY_ATTR_GO_CONCURRENT,
++ NL80211_FREQUENCY_ATTR_NO_20MHZ,
++ NL80211_FREQUENCY_ATTR_NO_10MHZ,
/* keep last */
__NL80211_FREQUENCY_ATTR_AFTER_LAST,
-@@ -2412,12 +2450,14 @@ enum nl80211_reg_type {
+@@ -2412,12 +2496,14 @@ enum nl80211_reg_type {
* in KHz. This is not a center a frequency but an actual regulatory
* band edge.
* @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
@@ -104,7 +175,7 @@
* @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
* currently defined
* @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
-@@ -2433,6 +2473,8 @@ enum nl80211_reg_rule_attr {
+@@ -2433,6 +2519,8 @@ enum nl80211_reg_rule_attr {
NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
NL80211_ATTR_POWER_RULE_MAX_EIRP,
@@ -113,7 +184,7 @@
/* keep last */
__NL80211_REG_RULE_ATTR_AFTER_LAST,
NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
-@@ -2442,9 +2484,15 @@ enum nl80211_reg_rule_attr {
+@@ -2442,9 +2530,15 @@ enum nl80211_reg_rule_attr {
* enum nl80211_sched_scan_match_attr - scheduled scan match attributes
* @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
* @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
@@ -131,7 +202,7 @@
* @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
* attribute number currently defined
* @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
-@@ -2477,6 +2525,9 @@ enum nl80211_sched_scan_match_attr {
+@@ -2477,6 +2571,9 @@ enum nl80211_sched_scan_match_attr {
* @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
* this includes probe requests or modes of operation that require
* beaconing.
@@ -141,7 +212,7 @@
*/
enum nl80211_reg_rule_flags {
NL80211_RRF_NO_OFDM = 1<<0,
-@@ -2488,6 +2539,7 @@ enum nl80211_reg_rule_flags {
+@@ -2488,6 +2585,7 @@ enum nl80211_reg_rule_flags {
NL80211_RRF_PTMP_ONLY = 1<<6,
NL80211_RRF_NO_IR = 1<<7,
__NL80211_RRF_NO_IBSS = 1<<8,
@@ -149,7 +220,21 @@
};
#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
-@@ -3131,6 +3183,7 @@ enum nl80211_key_attributes {
+@@ -2526,10 +2624,13 @@ enum nl80211_dfs_regions {
+ * present has been registered with the wireless core that
+ * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a
+ * supported feature.
++ * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the
++ * platform is operating in an indoor environment.
+ */
+ enum nl80211_user_reg_hint_type {
+ NL80211_USER_REG_HINT_USER = 0,
+ NL80211_USER_REG_HINT_CELL_BASE = 1,
++ NL80211_USER_REG_HINT_INDOOR = 2,
+ };
+
+ /**
+@@ -3131,6 +3232,7 @@ enum nl80211_key_attributes {
* in an array of MCS numbers.
* @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection,
* see &struct nl80211_txrate_vht
@@ -157,7 +242,7 @@
* @__NL80211_TXRATE_AFTER_LAST: internal
* @NL80211_TXRATE_MAX: highest TX rate attribute
*/
-@@ -3139,6 +3192,7 @@ enum nl80211_tx_rate_attributes {
+@@ -3139,6 +3241,7 @@ enum nl80211_tx_rate_attributes {
NL80211_TXRATE_LEGACY,
NL80211_TXRATE_HT,
NL80211_TXRATE_VHT,
@@ -165,7 +250,7 @@
/* keep last */
__NL80211_TXRATE_AFTER_LAST,
-@@ -3156,6 +3210,12 @@ struct nl80211_txrate_vht {
+@@ -3156,6 +3259,12 @@ struct nl80211_txrate_vht {
__u16 mcs[NL80211_VHT_NSS_MAX];
};
@@ -178,7 +263,24 @@
/**
* enum nl80211_band - Frequency band
* @NL80211_BAND_2GHZ: 2.4 GHz ISM band
-@@ -3801,11 +3861,6 @@ enum nl80211_ap_sme_features {
+@@ -3595,6 +3704,8 @@ enum nl80211_iface_limit_attrs {
+ * different channels may be used within this group.
+ * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap
+ * of supported channel widths for radar detection.
++ * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
++ * of supported regulatory regions for radar detection.
+ * @NUM_NL80211_IFACE_COMB: number of attributes
+ * @MAX_NL80211_IFACE_COMB: highest attribute number
+ *
+@@ -3628,6 +3739,7 @@ enum nl80211_if_combination_attrs {
+ NL80211_IFACE_COMB_STA_AP_BI_MATCH,
+ NL80211_IFACE_COMB_NUM_CHANNELS,
+ NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
++ NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
+
+ /* keep last */
+ NUM_NL80211_IFACE_COMB,
+@@ -3801,11 +3913,8 @@ enum nl80211_ap_sme_features {
* @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
* to work properly to suppport receiving regulatory hints from
* cellular base stations.
@@ -187,19 +289,30 @@
- * in the interface combinations, even when it's only used for scan
- * and remain-on-channel. This could be due to, for example, the
- * remain-on-channel implementation requiring a channel context.
++ * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only
++ * here to reserve the value for API/ABI compatibility)
* @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
* equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
* mode
-@@ -3847,7 +3902,7 @@ enum nl80211_feature_flags {
- NL80211_FEATURE_HT_IBSS = 1 << 1,
- NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
- NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
-- NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4,
-+ /* bit 4 is reserved - don't use */
- NL80211_FEATURE_SAE = 1 << 5,
- NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6,
- NL80211_FEATURE_SCAN_FLUSH = 1 << 7,
-@@ -4037,4 +4092,20 @@ struct nl80211_vendor_cmd_info {
+@@ -3841,6 +3950,9 @@ enum nl80211_ap_sme_features {
+ * interface. An active monitor interface behaves like a normal monitor
+ * interface, but gets added to the driver. It ensures that incoming
+ * unicast packets directed at the configured interface address get ACKed.
++ * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic
++ * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the
++ * lifetime of a BSS.
+ */
+ enum nl80211_feature_flags {
+ NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
+@@ -3861,6 +3973,7 @@ enum nl80211_feature_flags {
+ NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15,
+ NL80211_FEATURE_USERSPACE_MPM = 1 << 16,
+ NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17,
++ NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18,
+ };
+
+ /**
+@@ -4037,4 +4150,20 @@ struct nl80211_vendor_cmd_info {
__u32 subcmd;
};
diff --git a/package/network/utils/iw/patches/120-antenna_gain.patch b/package/network/utils/iw/patches/120-antenna_gain.patch
index 223a59a246..04316ab0a4 100644
--- a/package/network/utils/iw/patches/120-antenna_gain.patch
+++ b/package/network/utils/iw/patches/120-antenna_gain.patch
@@ -1,6 +1,6 @@
--- a/phy.c
+++ b/phy.c
-@@ -424,3 +424,31 @@ COMMAND(set, antenna, "<bitmap> | all |
+@@ -424,3 +424,31 @@ COMMAND(set, antenna, "<bitmap> | all |
NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_antenna,
"Set a bitmap of allowed antennas to use for TX and RX.\n"
"The driver may reject antenna configurations it cannot support.");