diff options
Diffstat (limited to 'package')
4 files changed, 185 insertions, 2 deletions
diff --git a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh index c98807f3cf..52e58beb51 100644 --- a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh +++ b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh @@ -23,6 +23,20 @@ drv_mac80211_init_device_config() { config_add_int rxantenna txantenna antenna_gain txpower distance config_add_boolean noscan config_add_array ht_capab + config_add_boolean \ + rxldpc \ + short_gi_80 \ + short_gi_160 \ + tx_stbc_2by1 \ + su_beamformer \ + su_beamformee \ + mu_beamformer \ + mu_beamformee \ + vht_txop_ps \ + htc_vht \ + rx_antenna_pattern \ + tx_antenna_pattern + config_add_int vht_max_mpdu vht_max_rx_stbc vht_link_adapt vht160 } drv_mac80211_init_iface_config() { @@ -55,12 +69,164 @@ mac80211_hostapd_setup_base() { append base_cfg "ieee80211n=1" "$N" ht_capab= - [ -n "$htmode" ] && ht_capab="[$htmode]" + case "$htmode" in + HT20|HT40-|HT40+) ht_capab="[$htmode]";; + VHT40|VHT80|VHT160) + case "$channel" in + 36|44|52|60|100|108|116|124|132|140|149|157) ht_capab="[HT40+]";; + 40|48|56|64|104|112|120|128|136|144|153|161) ht_capab="[HT40-]";; + esac + ;; + esac for cap in $ht_capab_list; do ht_capab="$ht_capab[$cap]" done [ -n "$ht_capab" ] && append base_cfg "ht_capab=$ht_capab" "$N" + + # 802.11ac + enable_ac=0 + idx="$channel" + case "$htmode" in + VHT40) + case "$channel" in + 36|40) idx=38;; + 44|48) idx=42;; + 52|56) idx=54;; + 60|64) idx=58;; + 100|104) idx=102;; + 108|112) idx=110;; + 116|120) idx=118;; + 124|128) idx=126;; + 132|136) idx=134;; + 140|144) idx=142;; + 149|153) idx=151;; + 157|161) idx=159;; + esac + enable_ac=1 + append base_cfg "vht_oper_chwidth=0" "$N" + append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N" + ;; + VHT80) + case "$channel" in + 36|40|44|48) idx=42;; + 52|56|60|64) idx=58;; + 100|104|108|112) idx=106;; + 116|120|124|128) idx=122;; + 132|136|140|144) idx=138;; + 149|153|157|161) idx=155;; + esac + enable_ac=1 + append base_cfg "vht_oper_chwidth=1" "$N" + append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N" + ;; + VHT160) + case "$channel" in + 36|40|44|48|52|56|60|64) idx=50;; + 100|104|108|112|116|120|124|128) idx=114;; + esac + enable_ac=1 + append base_cfg "vht_oper_chwidth=2" "$N" + append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N" + ;; + esac + + if [ "$enable_ac" != "0" ]; then + json_get_vars \ + rxldpc:1 \ + short_gi_80:1 \ + short_gi_160:1 \ + tx_stbc_2by1:1 \ + su_beamformer:1 \ + su_beamformee:1 \ + mu_beamformer:1 \ + mu_beamformee:1 \ + vht_txop_ps:1 \ + htc_vht:1 \ + rx_antenna_pattern:1 \ + tx_antenna_pattern:1 \ + vht_max_mpdu:11454 \ + vht_max_rx_stbc:4 \ + vht_link_adapt:3 \ + vht160:2 + + append base_cfg "ieee80211ac=1" "$N" + vht_capab="" + vht_cap=0 + for cap in $(iw phy "$phy" info | awk -F "[()]" '/VHT Capabilities/ { print $2 }'); do + vht_cap="$(($vht_cap | $cap))" + done + + # boolean + [ "$((($vht_cap & 16) * $rxldpc))" -eq 16 ] && \ + vht_capab="$vht_capab[RXLDPC]" + [ "$((($vht_cap & 32) * $short_gi_80))" -eq 32 ] && \ + vht_capab="$vht_capab[SHORT-GI-80]" + [ "$((($vht_cap & 64) * $short_gi_160))" -eq 64 ] && \ + vht_capab="$vht_capab[SHORT-GI-160]" + [ "$((($vht_cap & 128) * $tx_stbc_2by1))" -eq 128 ] && \ + vht_capab="$vht_capab[TX-STBC-2BY1]" + [ "$((($vht_cap & 2048) * $su_beamformer))" -eq 2048 ] && \ + vht_capab="$vht_capab[SU-BEAMFORMER]" + [ "$((($vht_cap & 4096) * $su_beamformee))" -eq 4096 ] && \ + vht_capab="$vht_capab[SU-BEAMFORMEE]" + [ "$((($vht_cap & 524288) * $mu_beamformer))" -eq 524288 ] && \ + vht_capab="$vht_capab[MU-BEAMFORMER]" + [ "$((($vht_cap & 1048576) * $mu_beamformee))" -eq 1048576 ] && \ + vht_capab="$vht_capab[MU-BEAMFORMEE]" + [ "$((($vht_cap & 2097152) * $vht_txop_ps))" -eq 2097152 ] && \ + vht_capab="$vht_capab[VHT-TXOP-PS]" + [ "$((($vht_cap & 4194304) * $htc_vht))" -eq 4194304 ] && \ + vht_capab="$vht_capab[HTC-VHT]" + [ "$((($vht_cap & 268435456) * $rx_antenna_pattern))" -eq 268435456 ] && \ + vht_capab="$vht_capab[RX-ANTENNA-PATTERN]" + [ "$((($vht_cap & 536870912) * $tx_antenna_pattern))" -eq 536870912 ] && \ + vht_capab="$vht_capab[TX-ANTENNA-PATTERN]" + + # supported Channel widths + vht160_hw=0 + [ "$(($vht_cap & 12))" -eq 4 -a 1 -le "$vht160" ] && \ + vht160_hw=1 + [ "$(($vht_cap & 12))" -eq 8 -a 2 -le "$vht160" ] && \ + vht160_hw=2 + [ "$vht160_hw" = 1 ] && vht_capab="$vht_capab[VHT160]" + [ "$vht160_hw" = 2 ] && vht_capab="$vht_capab[VHT160-80PLUS80]" + + # maximum MPDU length + vht_max_mpdu_hw=3895 + [ "$(($vht_cap & 3))" -ge 1 -a 7991 -le "$vht_max_mpdu" ] && \ + vht_max_mpdu_hw=7991 + [ "$(($vht_cap & 3))" -ge 2 -a 11454 -le "$vht_max_mpdu" ] && \ + vht_max_mpdu_hw=11454 + [ "$vht_max_mpdu_hw" != 3895 ] && \ + vht_capab="$vht_capab[MAX-MPDU-$vht_max_mpdu_hw]" + + # support for the reception of PPDUs using STBC + vht_max_rx_stbc_hw=0 + [ "$(($vht_cap & 1792))" -ge 256 -a 1 -le "$vht_max_rx_stbc" ] && \ + vht_max_rx_stbc_hw=1 + [ "$(($vht_cap & 1792))" -ge 512 -a 2 -le "$vht_max_rx_stbc" ] && \ + vht_max_rx_stbc_hw=2 + [ "$(($vht_cap & 1792))" -ge 768 -a 3 -le "$vht_max_rx_stbc" ] && \ + vht_max_rx_stbc_hw=3 + [ "$(($vht_cap & 1792))" -ge 1024 -a 4 -le "$vht_max_rx_stbc" ] && \ + vht_max_rx_stbc_hw=4 + [ "$vht_max_rx_stbc_hw" = 1 ] && vht_capab="$vht_capab[RX-STBC-1]" + [ "$vht_max_rx_stbc_hw" = 2 ] && vht_capab="$vht_capab[RX-STBC-12]" + [ "$vht_max_rx_stbc_hw" = 3 ] && vht_capab="$vht_capab[RX-STBC-123]" + [ "$vht_max_rx_stbc_hw" = 4 ] && vht_capab="$vht_capab[RX-STBC-1234]" + + # whether or not the STA supports link adaptation using VHT variant + vht_link_adapt_hw=0 + [ "$(($vht_cap & 201326592))" -ge 134217728 -a 2 -le "$vht_link_adapt" ] && \ + vht_link_adapt_hw=2 + [ "$(($vht_cap & 201326592))" -ge 201326592 -a 3 -le "$vht_link_adapt" ] && \ + vht_link_adapt_hw=3 + [ "$vht_link_adapt_hw" != 0 ] && \ + vht_capab="$vht_capab[VHT-LINK-ADAPT-$vht_link_adapt_hw]" + + [ -n "$vht_capab" ] && append base_cfg "vht_capab=$vht_capab" "$N" + fi } hostapd_prepare_device_config "$hostapd_conf_file" nl80211 diff --git a/package/kernel/mac80211/files/lib/wifi/mac80211.sh b/package/kernel/mac80211/files/lib/wifi/mac80211.sh index e33b09abb2..e299ab939f 100644 --- a/package/kernel/mac80211/files/lib/wifi/mac80211.sh +++ b/package/kernel/mac80211/files/lib/wifi/mac80211.sh @@ -69,6 +69,8 @@ detect_mac80211() { mode_11n="" mode_band="g" channel="11" + htmode="" + ht_cap=0 for cap in $(iw phy "$dev" info | grep 'Capabilities:' | cut -d: -f2); do ht_cap="$(($ht_cap | $cap))" @@ -76,7 +78,7 @@ detect_mac80211() { ht_capab=""; [ "$ht_cap" -gt 0 ] && { mode_11n="n" - append ht_capab " option htmode HT20" "$N" + htmode="HT20" list=" list ht_capab" [ "$(($ht_cap & 1))" -eq 1 ] && append ht_capab "$list LDPC" "$N" @@ -91,6 +93,15 @@ detect_mac80211() { } iw phy "$dev" info | grep -q '2412 MHz' || { mode_band="a"; channel="36"; } + vht_cap=$(iw phy "$dev" info | grep -c 'VHT Capabilities') + [ "$vht_cap" -gt 0 ] && { + mode_band="a"; + channel="36" + htmode="VHT80" + } + + [ -n $htmode ] && append ht_capab " option htmode $htmode" "$N" + if [ -x /usr/bin/readlink ]; then path="$(readlink -f /sys/class/ieee80211/${dev}/device)" path="${path##/sys/devices/}" diff --git a/package/network/services/hostapd/files/hostapd-full.config b/package/network/services/hostapd/files/hostapd-full.config index bc999c04a1..e021cd0058 100644 --- a/package/network/services/hostapd/files/hostapd-full.config +++ b/package/network/services/hostapd/files/hostapd-full.config @@ -139,6 +139,9 @@ CONFIG_IEEE80211R=y # IEEE 802.11n (High Throughput) support CONFIG_IEEE80211N=y +# IEEE 802.11ac (Very High Throughput) support +CONFIG_IEEE80211AC=y + # Remove debugging code that is printing out debug messages to stdout. # This can be used to reduce the size of the hostapd considerably if debugging # code is not needed. diff --git a/package/network/services/hostapd/files/hostapd-mini.config b/package/network/services/hostapd/files/hostapd-mini.config index 01a04cb237..3675709935 100644 --- a/package/network/services/hostapd/files/hostapd-mini.config +++ b/package/network/services/hostapd/files/hostapd-mini.config @@ -138,6 +138,9 @@ CONFIG_PEERKEY=y # IEEE 802.11n (High Throughput) support CONFIG_IEEE80211N=y +# IEEE 802.11ac (Very High Throughput) support +CONFIG_IEEE80211AC=y + # Remove debugging code that is printing out debug messages to stdout. # This can be used to reduce the size of the hostapd considerably if debugging # code is not needed. |