diff options
Diffstat (limited to 'package/wpa_supplicant')
| -rw-r--r-- | package/wpa_supplicant/Makefile | 73 | ||||
| -rw-r--r-- | package/wpa_supplicant/files/config.armeb | 139 | ||||
| -rw-r--r-- | package/wpa_supplicant/files/config.i386 | 181 | ||||
| -rw-r--r-- | package/wpa_supplicant/files/config.mips | 139 | ||||
| -rw-r--r-- | package/wpa_supplicant/files/config.mipsel | 139 |
5 files changed, 671 insertions, 0 deletions
diff --git a/package/wpa_supplicant/Makefile b/package/wpa_supplicant/Makefile new file mode 100644 index 0000000000..b3fec0c120 --- /dev/null +++ b/package/wpa_supplicant/Makefile @@ -0,0 +1,73 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +# $Id$ + +include $(TOPDIR)/rules.mk + +PKG_NAME:=wpa_supplicant +PKG_VERSION:=0.5.5 +PKG_RELEASE:=1 +PKG_MD5SUM:=482dd85949c82aa15309e5ab3d2cf5c3 + +PKG_SOURCE_URL:=http://hostap.epitest.fi/releases +PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz +PKG_CAT:=zcat + +PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION) +PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install + +include $(INCLUDE_DIR)/package.mk + +define Package/wpa-supplicant + SECTION:=net + CATEGORY:=Network + DEPENDS:=+libopenssl + TITLE:=WPA Supplicant + DESCRIPTION:=WPA Supplicant + URL:=http://hostap.epitest.fi/wpa_supplicant/ +endef + + +define Package/wpa-cli + SECTION:=net + CATEGORY:=Network + DEPENDS:=wpa-supplicant + TITLE:=WPA Supplicant command line interface + DESCRIPTION:= +endef + + +define Build/Configure + cp ./files/config.$(ARCH) $(PKG_BUILD_DIR)/.config +endef + +define Build/Compile + rm -rf $(PKG_INSTALL_DIR) + mkdir -p $(PKG_INSTALL_DIR) + $(MAKE) -C $(PKG_BUILD_DIR) \ + CC="$(TARGET_CC)" \ + KERNEL=$(LINUX_DIR) \ + CPPFLAGS="-I$(STAGING_DIR)/usr/include -I$(STAGING_DIR)/include" \ + LDFLAGS=" -L$(STAGING_DIR)/usr/lib -L$(STAGING_DIR)/lib" \ + all + $(STRIP) $(PKG_BUILD_DIR)/wpa_supplicant + $(STRIP) $(PKG_BUILD_DIR)/wpa_cli + +endef + +define Package/wpa-supplicant/install + install -m0755 -d $(1)/usr/sbin + $(CP) $(PKG_BUILD_DIR)/wpa_supplicant $(1)/usr/sbin/ +endef + +define Package/wpa-cli/install + install -m0755 -d $(1)/usr/sbin + $(CP) $(PKG_BUILD_DIR)/wpa_cli $(1)/usr/sbin/ +endef + +$(eval $(call BuildPackage,wpa-supplicant)) +$(eval $(call BuildPackage,wpa-cli)) diff --git a/package/wpa_supplicant/files/config.armeb b/package/wpa_supplicant/files/config.armeb new file mode 100644 index 0000000000..431945695f --- /dev/null +++ b/package/wpa_supplicant/files/config.armeb @@ -0,0 +1,139 @@ +# Driver interface for Host AP driver +#CONFIG_DRIVER_HOSTAP=y + +# Driver interface for Agere driver +#CONFIG_DRIVER_HERMES=y +# Change include directories to match with the local setup +#CFLAGS += -I../../hcf -I../../include -I../../include/hcf +#CFLAGS += -I../../include/wireless + +# Driver interface for madwifi driver +#CONFIG_DRIVER_MADWIFI=y +# Change include directories to match with the local setup +#CFLAGS += -I../madwifi/wpa + +# Driver interface for Prism54 driver +# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is +# for developers only) +#CONFIG_DRIVER_PRISM54=y + +# Driver interface for ndiswrapper +#CONFIG_DRIVER_NDISWRAPPER=y + +# Driver interface for Atmel driver +#CONFIG_DRIVER_ATMEL=y + +# Driver interface for Broadcom driver +# CONFIG_DRIVER_BROADCOM=y +# Example path for wlioctl.h; change to match your configuration +# CFLAGS += -I../nvram/include + +# Driver interface for Intel ipw2100/2200 driver +#CONFIG_DRIVER_IPW=y + +# Driver interface for generic Linux wireless extensions +CONFIG_DRIVER_WEXT=y + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib + +# Driver interface for Windows NDIS +#CONFIG_DRIVER_NDIS=y +#CFLAGS += -I/usr/include/w32api/ddk +#LIBS += -L/usr/local/lib +# For native build using mingw +#CONFIG_NATIVE_WINDOWS=y +# Additional directories for cross-compilation on Linux host for mingw target +#CFLAGS += -I/opt/mingw/mingw32/include/ddk +#LIBS += -L/opt/mingw/mingw32/lib +#CC=mingw32-gcc + +# Driver interface for development testing +#CONFIG_DRIVER_TEST=y + +# Driver interface for wired Ethernet drivers +CONFIG_DRIVER_WIRED=y + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 (automatically included if EAP-TTLS is enabled) +CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled) +CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +CONFIG_EAP_TLS=y + +# EAL-PEAP +CONFIG_EAP_PEAP=y + +# EAP-TTLS +CONFIG_EAP_TTLS=y + +# EAP-GTC +CONFIG_EAP_GTC=y + +# EAP-OTP +CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +#CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-PAX +#CONFIG_EAP_PAX=y + +# LEAP +CONFIG_EAP_LEAP=y + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +#CONFIG_EAP_AKA=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. +CONFIG_SMARTCARD=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +#CONFIG_PCSC=y + +# Development testing +#CONFIG_EAPOL_TEST=y + +# Replace native Linux implementation of packet sockets with libdnet/libpcap. +# This will be automatically set for non-Linux OS. +#CONFIG_DNET_PCAP=y + +# Include control interface for external programs, e.g, wpa_cli +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +#CONFIG_READLINE=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf) +CONFIG_BACKEND=file diff --git a/package/wpa_supplicant/files/config.i386 b/package/wpa_supplicant/files/config.i386 new file mode 100644 index 0000000000..1d56e0615f --- /dev/null +++ b/package/wpa_supplicant/files/config.i386 @@ -0,0 +1,181 @@ +# Example wpa_supplicant build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cases, these lines should use += in order not +# to override previous values of the variables. + + +# Uncomment following two lines and fix the paths if you have installed openssl +# in non-default location +#CFLAGS += -I/usr/local/openssl/include +#LIBS += -L/usr/local/openssl/lib + +# Some Red Hat versions seem to include kerberos header files from OpenSSL, but +# the kerberos files are not in the default include path. Following line can be +# used to fix build issues on such systems (krb5.h not found). +#CFLAGS += -I/usr/include/kerberos + +# Example configuration for various cross-compilation platforms + +#### sveasoft (e.g., for Linksys WRT54G) ###################################### +#CC=mipsel-uclibc-gcc +#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc +#CFLAGS += -Os +#CPPFLAGS += -I../src/include -I../../src/router/openssl/include +#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl +############################################################################### + +#### openwrt (e.g., for Linksys WRT54G) ####################################### +#CC=mipsel-uclibc-gcc +#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc +#CFLAGS += -Os +#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ +# -I../WRT54GS/release/src/include +#LIBS = -lssl +############################################################################### + + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for Agere driver +#CONFIG_DRIVER_HERMES=y +# Change include directories to match with the local setup +#CFLAGS += -I../../hcf -I../../include -I../../include/hcf +#CFLAGS += -I../../include/wireless + +# Driver interface for madwifi driver +#CONFIG_DRIVER_MADWIFI=y +# Change include directories to match with the local setup +#CFLAGS += -I../madwifi/wpa + +# Driver interface for Prism54 driver +# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is +# for developers only) +#CONFIG_DRIVER_PRISM54=y + +# Driver interface for ndiswrapper +#CONFIG_DRIVER_NDISWRAPPER=y + +# Driver interface for Atmel driver +CONFIG_DRIVER_ATMEL=y + +# Driver interface for Broadcom driver +#CONFIG_DRIVER_BROADCOM=y +# Example path for wlioctl.h; change to match your configuration +#CFLAGS += -I/opt/WRT54GS/release/src/include + +# Driver interface for Intel ipw2100/2200 driver +#CONFIG_DRIVER_IPW=y + +# Driver interface for generic Linux wireless extensions +CONFIG_DRIVER_WEXT=y + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib + +# Driver interface for Windows NDIS +#CONFIG_DRIVER_NDIS=y +#CFLAGS += -I/usr/include/w32api/ddk +#LIBS += -L/usr/local/lib +# For native build using mingw +#CONFIG_NATIVE_WINDOWS=y +# Additional directories for cross-compilation on Linux host for mingw target +#CFLAGS += -I/opt/mingw/mingw32/include/ddk +#LIBS += -L/opt/mingw/mingw32/lib +#CC=mingw32-gcc + +# Driver interface for development testing +#CONFIG_DRIVER_TEST=y + +# Driver interface for wired Ethernet drivers +CONFIG_DRIVER_WIRED=y + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 (automatically included if EAP-TTLS is enabled) +CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled) +CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +CONFIG_EAP_TLS=y + +# EAL-PEAP +CONFIG_EAP_PEAP=y + +# EAP-TTLS +CONFIG_EAP_TTLS=y + +# EAP-GTC +CONFIG_EAP_GTC=y + +# EAP-OTP +CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +#CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-PAX +#CONFIG_EAP_PAX=y + +# LEAP +CONFIG_EAP_LEAP=y + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +#CONFIG_EAP_AKA=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. +CONFIG_SMARTCARD=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +#CONFIG_PCSC=y + +# Development testing +#CONFIG_EAPOL_TEST=y + +# Replace native Linux implementation of packet sockets with libdnet/libpcap. +# This will be automatically set for non-Linux OS. +#CONFIG_DNET_PCAP=y + +# Include control interface for external programs, e.g, wpa_cli +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +#CONFIG_READLINE=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf) +CONFIG_BACKEND=file diff --git a/package/wpa_supplicant/files/config.mips b/package/wpa_supplicant/files/config.mips new file mode 100644 index 0000000000..431945695f --- /dev/null +++ b/package/wpa_supplicant/files/config.mips @@ -0,0 +1,139 @@ +# Driver interface for Host AP driver +#CONFIG_DRIVER_HOSTAP=y + +# Driver interface for Agere driver +#CONFIG_DRIVER_HERMES=y +# Change include directories to match with the local setup +#CFLAGS += -I../../hcf -I../../include -I../../include/hcf +#CFLAGS += -I../../include/wireless + +# Driver interface for madwifi driver +#CONFIG_DRIVER_MADWIFI=y +# Change include directories to match with the local setup +#CFLAGS += -I../madwifi/wpa + +# Driver interface for Prism54 driver +# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is +# for developers only) +#CONFIG_DRIVER_PRISM54=y + +# Driver interface for ndiswrapper +#CONFIG_DRIVER_NDISWRAPPER=y + +# Driver interface for Atmel driver +#CONFIG_DRIVER_ATMEL=y + +# Driver interface for Broadcom driver +# CONFIG_DRIVER_BROADCOM=y +# Example path for wlioctl.h; change to match your configuration +# CFLAGS += -I../nvram/include + +# Driver interface for Intel ipw2100/2200 driver +#CONFIG_DRIVER_IPW=y + +# Driver interface for generic Linux wireless extensions +CONFIG_DRIVER_WEXT=y + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib + +# Driver interface for Windows NDIS +#CONFIG_DRIVER_NDIS=y +#CFLAGS += -I/usr/include/w32api/ddk +#LIBS += -L/usr/local/lib +# For native build using mingw +#CONFIG_NATIVE_WINDOWS=y +# Additional directories for cross-compilation on Linux host for mingw target +#CFLAGS += -I/opt/mingw/mingw32/include/ddk +#LIBS += -L/opt/mingw/mingw32/lib +#CC=mingw32-gcc + +# Driver interface for development testing +#CONFIG_DRIVER_TEST=y + +# Driver interface for wired Ethernet drivers +CONFIG_DRIVER_WIRED=y + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 (automatically included if EAP-TTLS is enabled) +CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled) +CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +CONFIG_EAP_TLS=y + +# EAL-PEAP +CONFIG_EAP_PEAP=y + +# EAP-TTLS +CONFIG_EAP_TTLS=y + +# EAP-GTC +CONFIG_EAP_GTC=y + +# EAP-OTP +CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +#CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-PAX +#CONFIG_EAP_PAX=y + +# LEAP +CONFIG_EAP_LEAP=y + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +#CONFIG_EAP_AKA=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. +CONFIG_SMARTCARD=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +#CONFIG_PCSC=y + +# Development testing +#CONFIG_EAPOL_TEST=y + +# Replace native Linux implementation of packet sockets with libdnet/libpcap. +# This will be automatically set for non-Linux OS. +#CONFIG_DNET_PCAP=y + +# Include control interface for external programs, e.g, wpa_cli +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +#CONFIG_READLINE=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf) +CONFIG_BACKEND=file diff --git a/package/wpa_supplicant/files/config.mipsel b/package/wpa_supplicant/files/config.mipsel new file mode 100644 index 0000000000..431945695f --- /dev/null +++ b/package/wpa_supplicant/files/config.mipsel @@ -0,0 +1,139 @@ +# Driver interface for Host AP driver +#CONFIG_DRIVER_HOSTAP=y + +# Driver interface for Agere driver +#CONFIG_DRIVER_HERMES=y +# Change include directories to match with the local setup +#CFLAGS += -I../../hcf -I../../include -I../../include/hcf +#CFLAGS += -I../../include/wireless + +# Driver interface for madwifi driver +#CONFIG_DRIVER_MADWIFI=y +# Change include directories to match with the local setup +#CFLAGS += -I../madwifi/wpa + +# Driver interface for Prism54 driver +# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is +# for developers only) +#CONFIG_DRIVER_PRISM54=y + +# Driver interface for ndiswrapper +#CONFIG_DRIVER_NDISWRAPPER=y + +# Driver interface for Atmel driver +#CONFIG_DRIVER_ATMEL=y + +# Driver interface for Broadcom driver +# CONFIG_DRIVER_BROADCOM=y +# Example path for wlioctl.h; change to match your configuration +# CFLAGS += -I../nvram/include + +# Driver interface for Intel ipw2100/2200 driver +#CONFIG_DRIVER_IPW=y + +# Driver interface for generic Linux wireless extensions +CONFIG_DRIVER_WEXT=y + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib + +# Driver interface for Windows NDIS +#CONFIG_DRIVER_NDIS=y +#CFLAGS += -I/usr/include/w32api/ddk +#LIBS += -L/usr/local/lib +# For native build using mingw +#CONFIG_NATIVE_WINDOWS=y +# Additional directories for cross-compilation on Linux host for mingw target +#CFLAGS += -I/opt/mingw/mingw32/include/ddk +#LIBS += -L/opt/mingw/mingw32/lib +#CC=mingw32-gcc + +# Driver interface for development testing +#CONFIG_DRIVER_TEST=y + +# Driver interface for wired Ethernet drivers +CONFIG_DRIVER_WIRED=y + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 (automatically included if EAP-TTLS is enabled) +CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled) +CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +CONFIG_EAP_TLS=y + +# EAL-PEAP +CONFIG_EAP_PEAP=y + +# EAP-TTLS +CONFIG_EAP_TTLS=y + +# EAP-GTC +CONFIG_EAP_GTC=y + +# EAP-OTP +CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +#CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-PAX +#CONFIG_EAP_PAX=y + +# LEAP +CONFIG_EAP_LEAP=y + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +#CONFIG_EAP_AKA=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. +CONFIG_SMARTCARD=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +#CONFIG_PCSC=y + +# Development testing +#CONFIG_EAPOL_TEST=y + +# Replace native Linux implementation of packet sockets with libdnet/libpcap. +# This will be automatically set for non-Linux OS. +#CONFIG_DNET_PCAP=y + +# Include control interface for external programs, e.g, wpa_cli +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +#CONFIG_READLINE=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf) +CONFIG_BACKEND=file |