diff options
Diffstat (limited to 'package/utils/busybox/config/networking/Config.in')
| -rw-r--r-- | package/utils/busybox/config/networking/Config.in | 643 |
1 files changed, 289 insertions, 354 deletions
diff --git a/package/utils/busybox/config/networking/Config.in b/package/utils/busybox/config/networking/Config.in index 407ddd30dd..bc2f127c4d 100644 --- a/package/utils/busybox/config/networking/Config.in +++ b/package/utils/busybox/config/networking/Config.in @@ -6,183 +6,6 @@ menu "Networking Utilities" -config BUSYBOX_CONFIG_NAMEIF - bool "nameif" - default BUSYBOX_DEFAULT_NAMEIF - select BUSYBOX_CONFIG_PLATFORM_LINUX - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - nameif is used to rename network interface by its MAC address. - Renamed interfaces MUST be in the down state. - It is possible to use a file (default: /etc/mactab) - with list of new interface names and MACs. - Maximum interface name length: IFNAMSIZ = 16 - File fields are separated by space or tab. - File format: - # Comment - new_interface_name XX:XX:XX:XX:XX:XX - -config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED - bool "Extended nameif" - default BUSYBOX_DEFAULT_FEATURE_NAMEIF_EXTENDED - depends on BUSYBOX_CONFIG_NAMEIF - help - This extends the nameif syntax to support the bus_info, driver, - phyaddr selectors. The syntax is compatible to the normal nameif. - File format: - new_interface_name driver=asix bus=usb-0000:00:08.2-3 - new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5 - new_interface_name phy_address=2 00:80:C8:38:91:B5 - new_interface_name mac=00:80:C8:38:91:B5 - new_interface_name 00:80:C8:38:91:B5 -config BUSYBOX_CONFIG_NBDCLIENT - bool "nbd-client" - default BUSYBOX_DEFAULT_NBDCLIENT - help - Network block device client -config BUSYBOX_CONFIG_NC - bool "nc" - default BUSYBOX_DEFAULT_NC - help - A simple Unix utility which reads and writes data across network - connections. - -config BUSYBOX_CONFIG_NC_SERVER - bool "Netcat server options (-l)" - default BUSYBOX_DEFAULT_NC_SERVER - depends on BUSYBOX_CONFIG_NC - help - Allow netcat to act as a server. - -config BUSYBOX_CONFIG_NC_EXTRA - bool "Netcat extensions (-eiw and -f FILE)" - default BUSYBOX_DEFAULT_NC_EXTRA - depends on BUSYBOX_CONFIG_NC - help - Add -e (support for executing the rest of the command line after - making or receiving a successful connection), -i (delay interval for - lines sent), -w (timeout for initial connection). - -config BUSYBOX_CONFIG_NC_110_COMPAT - bool "Netcat 1.10 compatibility (+2.5k)" - default BUSYBOX_DEFAULT_NC_110_COMPAT # off specially for Rob - depends on BUSYBOX_CONFIG_NC - help - This option makes nc closely follow original nc-1.10. - The code is about 2.5k bigger. It enables - -s ADDR, -n, -u, -v, -o FILE, -z options, but loses - busybox-specific extensions: -f FILE. -config BUSYBOX_CONFIG_PING - bool "ping" - default BUSYBOX_DEFAULT_PING - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to - elicit an ICMP ECHO_RESPONSE from a host or gateway. - -config BUSYBOX_CONFIG_PING6 - bool "ping6" - default BUSYBOX_DEFAULT_PING6 - depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_PING - help - This will give you a ping that can talk IPv6. - -config BUSYBOX_CONFIG_FEATURE_FANCY_PING - bool "Enable fancy ping output" - default BUSYBOX_DEFAULT_FEATURE_FANCY_PING - depends on BUSYBOX_CONFIG_PING - help - Make the output from the ping applet include statistics, and at the - same time provide full support for ICMP packets. -config BUSYBOX_CONFIG_WGET - bool "wget" - default BUSYBOX_DEFAULT_WGET - help - wget is a utility for non-interactive download of files from HTTP - and FTP servers. - -config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR - bool "Enable a nifty process meter (+2k)" - default BUSYBOX_DEFAULT_FEATURE_WGET_STATUSBAR - depends on BUSYBOX_CONFIG_WGET - help - Enable the transfer progress bar for wget transfers. - -config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION - bool "Enable HTTP authentication" - default BUSYBOX_DEFAULT_FEATURE_WGET_AUTHENTICATION - depends on BUSYBOX_CONFIG_WGET - help - Support authenticated HTTP transfers. - -config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS - bool "Enable long options" - default BUSYBOX_DEFAULT_FEATURE_WGET_LONG_OPTIONS - depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the wget applet. - -config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT - bool "Enable timeout option -T SEC" - default BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT - depends on BUSYBOX_CONFIG_WGET - help - Supports network read and connect timeouts for wget, - so that wget will give up and timeout, through the -T - command line option. - - Currently only connect and network data read timeout are - supported (i.e., timeout is not applied to the DNS query). When - FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option - will work in addition to -T. - -config BUSYBOX_CONFIG_FEATURE_WGET_OPENSSL - bool "Try to connect to HTTPS using openssl" - default BUSYBOX_DEFAULT_FEATURE_WGET_OPENSSL - depends on BUSYBOX_CONFIG_WGET - help - Choose how wget establishes SSL connection for https:// URLs. - - Busybox itself contains no SSL code. wget will spawn - a helper program to talk over HTTPS. - - OpenSSL has a simple SSL client for debug purposes. - If you select "openssl" helper, wget will effectively call - "openssl s_client -quiet -connect IP:443 2>/dev/null" - and pipe its data through it. - Note inconvenient API: host resolution is done twice, - and there is no guarantee openssl's idea of IPv6 address - format is the same as ours. - Another problem is that s_client prints debug information - to stderr, and it needs to be suppressed. This means - all error messages get suppressed too. - openssl is also a big binary, often dynamically linked - against ~15 libraries. - -config BUSYBOX_CONFIG_FEATURE_WGET_SSL_HELPER - bool "Try to connect to HTTPS using ssl_helper" - default BUSYBOX_DEFAULT_FEATURE_WGET_SSL_HELPER - depends on BUSYBOX_CONFIG_WGET - help - Choose how wget establishes SSL connection for https:// URLs. - - Busybox itself contains no SSL code. wget will spawn - a helper program to talk over HTTPS. - - ssl_helper is a tool which can be built statically - from busybox sources against a small embedded SSL library. - Please see networking/ssl_helper/README. - It does not require double host resolution and emits - error messages to stderr. - - Precompiled static binary may be available at - http://busybox.net/downloads/binaries/ -config BUSYBOX_CONFIG_WHOIS - bool "whois" - default BUSYBOX_DEFAULT_WHOIS - help - whois is a client for the whois directory service - config BUSYBOX_CONFIG_FEATURE_IPV6 bool "Enable IPv6 support" default BUSYBOX_DEFAULT_FEATURE_IPV6 @@ -230,7 +53,6 @@ config BUSYBOX_CONFIG_ARP select BUSYBOX_CONFIG_PLATFORM_LINUX help Manipulate the system ARP cache. - config BUSYBOX_CONFIG_ARPING bool "arping" default BUSYBOX_DEFAULT_ARPING @@ -264,37 +86,26 @@ config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW help Add support for option which prints the current config: show - config BUSYBOX_CONFIG_DNSD bool "dnsd" default BUSYBOX_DEFAULT_DNSD help Small and static DNS server daemon. - config BUSYBOX_CONFIG_ETHER_WAKE bool "ether-wake" default BUSYBOX_DEFAULT_ETHER_WAKE select BUSYBOX_CONFIG_PLATFORM_LINUX help Send a magic packet to wake up sleeping machines. - -config BUSYBOX_CONFIG_FAKEIDENTD - bool "fakeidentd" - default BUSYBOX_DEFAULT_FAKEIDENTD - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - fakeidentd listens on the ident port and returns a predefined - fake value on any query. - config BUSYBOX_CONFIG_FTPD bool "ftpd" default BUSYBOX_DEFAULT_FTPD help simple FTP daemon. You have to run it via inetd. -config BUSYBOX_CONFIG_FEATURE_FTP_WRITE +config BUSYBOX_CONFIG_FEATURE_FTPD_WRITE bool "Enable upload commands" - default BUSYBOX_DEFAULT_FEATURE_FTP_WRITE + default BUSYBOX_DEFAULT_FEATURE_FTPD_WRITE depends on BUSYBOX_CONFIG_FTPD help Enable all kinds of FTP upload commands (-w option) @@ -310,13 +121,12 @@ config BUSYBOX_CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST it increases the code size by ~40 bytes. Most other ftp servers seem to behave similar to this. -config BUSYBOX_CONFIG_FEATURE_FTP_AUTHENTICATION +config BUSYBOX_CONFIG_FEATURE_FTPD_AUTHENTICATION bool "Enable authentication" - default BUSYBOX_DEFAULT_FEATURE_FTP_AUTHENTICATION + default BUSYBOX_DEFAULT_FEATURE_FTPD_AUTHENTICATION depends on BUSYBOX_CONFIG_FTPD help Enable basic system login as seen in telnet etc. - config BUSYBOX_CONFIG_FTPGET bool "ftpget" default BUSYBOX_DEFAULT_FTPGET @@ -335,13 +145,17 @@ config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS depends on BUSYBOX_CONFIG_LONG_OPTS && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT) help Support long options for the ftpget/ftpput applet. - config BUSYBOX_CONFIG_HOSTNAME bool "hostname" default BUSYBOX_DEFAULT_HOSTNAME help Show or set the system's host name. +config BUSYBOX_CONFIG_DNSDOMAINNAME + bool "dnsdomainname" + default BUSYBOX_DEFAULT_DNSDOMAINNAME + help + Alias to "hostname -d". config BUSYBOX_CONFIG_HTTPD bool "httpd" default BUSYBOX_DEFAULT_HTTPD @@ -460,7 +274,6 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP help Makes httpd send files using GZIP content encoding if the client supports it and a pre-compressed <file>.gz exists. - config BUSYBOX_CONFIG_IFCONFIG bool "ifconfig" default BUSYBOX_DEFAULT_IFCONFIG @@ -508,7 +321,6 @@ config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS help Setting this will make ifconfig attempt to find the broadcast automatically if the value '+' is used. - config BUSYBOX_CONFIG_IFENSLAVE bool "ifenslave" default BUSYBOX_DEFAULT_IFENSLAVE @@ -516,20 +328,18 @@ config BUSYBOX_CONFIG_IFENSLAVE help Userspace application to bind several interfaces to a logical interface (use with kernel bonding driver). - config BUSYBOX_CONFIG_IFPLUGD bool "ifplugd" default BUSYBOX_DEFAULT_IFPLUGD select BUSYBOX_CONFIG_PLATFORM_LINUX help Network interface plug detection daemon. - -config BUSYBOX_CONFIG_IFUPDOWN - bool "ifupdown" - default BUSYBOX_DEFAULT_IFUPDOWN +config BUSYBOX_CONFIG_IFUP + bool "ifup" + default BUSYBOX_DEFAULT_IFUP help - Activate or deactivate the specified interfaces. This applet makes - use of either "ifconfig" and "route" or the "ip" command to actually + Activate the specified interfaces. This applet makes use + of either "ifconfig" and "route" or the "ip" command to actually configure network interfaces. Therefore, you will probably also want to enable either IFCONFIG and ROUTE, or enable FEATURE_IFUPDOWN_IP and the various IP options. Of @@ -540,10 +350,16 @@ config BUSYBOX_CONFIG_IFUPDOWN "ifconfig", "route" and "run-parts" or the "ip" command, either via busybox or via standalone utilities. +config BUSYBOX_CONFIG_IFDOWN + bool "ifdown" + default BUSYBOX_DEFAULT_IFDOWN + help + Deactivate the specified interfaces. + config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH string "Absolute path to ifstate file" default BUSYBOX_DEFAULT_IFUPDOWN_IFSTATE_PATH - depends on BUSYBOX_CONFIG_IFUPDOWN + depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN help ifupdown keeps state information in a file called ifstate. Typically it is located in /var/run/ifstate, however @@ -552,69 +368,39 @@ config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH This config option defines location of ifstate. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP - bool "Use ip applet" + bool "Use ip tool (else ifconfig/route is used)" default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IP - depends on BUSYBOX_CONFIG_IFUPDOWN + depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN help Use the iproute "ip" command to implement "ifup" and "ifdown", rather - than the default of using the older 'ifconfig' and 'route' utilities. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN - bool "Use busybox ip applet" - default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IP_BUILTIN - depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP - select BUSYBOX_CONFIG_PLATFORM_LINUX - select BUSYBOX_CONFIG_IP - select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS - select BUSYBOX_CONFIG_FEATURE_IP_LINK - select BUSYBOX_CONFIG_FEATURE_IP_ROUTE - help - Use the busybox iproute "ip" applet to implement "ifupdown". + than the default of using the older "ifconfig" and "route" utilities. - If left disabled, you must install the full-blown iproute2 - utility or the "ifup" and "ifdown" applets will not work. - -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN - bool "Use busybox ifconfig and route applets" - default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN - depends on BUSYBOX_CONFIG_IFUPDOWN && !BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP - select BUSYBOX_CONFIG_IFCONFIG - select BUSYBOX_CONFIG_ROUTE - help - Use the busybox iproute "ifconfig" and "route" applets to - implement the "ifup" and "ifdown" utilities. + If Y: you must install either the full-blown iproute2 package + or enable "ip" applet in Busybox, or the "ifup" and "ifdown" applets + will not work. - If left disabled, you must install the full-blown ifconfig - and route utilities, or the "ifup" and "ifdown" applets will not - work. + If N: you must install either the full-blown ifconfig and route + utilities, or enable these applets in Busybox. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4 bool "Support for IPv4" default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV4 - depends on BUSYBOX_CONFIG_IFUPDOWN + depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN help If you want ifup/ifdown to talk IPv4, leave this on. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6 bool "Support for IPv6" default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_IPV6 - depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_FEATURE_IPV6 + depends on (BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN) && BUSYBOX_CONFIG_FEATURE_IPV6 help If you need support for IPv6, turn this option on. -### UNUSED -###config FEATURE_IFUPDOWN_IPX -### bool "Support for IPX" -### default y -### depends on IFUPDOWN -### help -### If this option is selected you can use busybox to work with IPX -### networks. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING bool "Enable mapping support" default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_MAPPING - depends on BUSYBOX_CONFIG_IFUPDOWN + depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN help This enables support for the "mapping" stanza, unless you have a weird network setup you don't need it. @@ -622,13 +408,12 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP bool "Support for external dhcp clients" default BUSYBOX_DEFAULT_FEATURE_IFUPDOWN_EXTERNAL_DHCP - depends on BUSYBOX_CONFIG_IFUPDOWN + depends on BUSYBOX_CONFIG_IFUP || BUSYBOX_CONFIG_IFDOWN help This enables support for the external dhcp clients. Clients are tried in the following order: dhcpcd, dhclient, pump and udhcpc. Otherwise, if udhcpc applet is enabled, it is used. Otherwise, ifup/ifdown will have no support for DHCP. - config BUSYBOX_CONFIG_INETD bool "inetd" default BUSYBOX_DEFAULT_INETD @@ -678,7 +463,6 @@ config BUSYBOX_CONFIG_FEATURE_INETD_RPC select BUSYBOX_CONFIG_FEATURE_HAVE_RPC help Support Sun-RPC based services - config BUSYBOX_CONFIG_IP bool "ip" default BUSYBOX_DEFAULT_IP @@ -688,24 +472,72 @@ config BUSYBOX_CONFIG_IP utility. You generally don't need "ip" to use busybox with TCP/IP. +config BUSYBOX_CONFIG_IPADDR + bool "ipaddr" + default BUSYBOX_DEFAULT_IPADDR + select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + Support short form of ip addr: ipaddr + +config BUSYBOX_CONFIG_IPLINK + bool "iplink" + default BUSYBOX_DEFAULT_IPLINK + select BUSYBOX_CONFIG_FEATURE_IP_LINK + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + Support short form of ip link: iplink + +config BUSYBOX_CONFIG_IPROUTE + bool "iproute" + default BUSYBOX_DEFAULT_IPROUTE + select BUSYBOX_CONFIG_FEATURE_IP_ROUTE + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + Support short form of ip route: iproute + +config BUSYBOX_CONFIG_IPTUNNEL + bool "iptunnel" + default BUSYBOX_DEFAULT_IPTUNNEL + select BUSYBOX_CONFIG_FEATURE_IP_TUNNEL + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + Support short form of ip tunnel: iptunnel + +config BUSYBOX_CONFIG_IPRULE + bool "iprule" + default BUSYBOX_DEFAULT_IPRULE + select BUSYBOX_CONFIG_FEATURE_IP_RULE + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + Support short form of ip rule: iprule + +config BUSYBOX_CONFIG_IPNEIGH + bool "ipneigh" + default BUSYBOX_DEFAULT_IPNEIGH + select BUSYBOX_CONFIG_FEATURE_IP_NEIGH + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + Support short form of ip neigh: ipneigh + config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS bool "ip address" default BUSYBOX_DEFAULT_FEATURE_IP_ADDRESS - depends on BUSYBOX_CONFIG_IP + depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPADDR help Address manipulation support for the "ip" applet. config BUSYBOX_CONFIG_FEATURE_IP_LINK bool "ip link" default BUSYBOX_DEFAULT_FEATURE_IP_LINK - depends on BUSYBOX_CONFIG_IP + depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPLINK help Configure network devices with "ip". config BUSYBOX_CONFIG_FEATURE_IP_ROUTE bool "ip route" default BUSYBOX_DEFAULT_FEATURE_IP_ROUTE - depends on BUSYBOX_CONFIG_IP + depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPROUTE help Add support for routing table management to "ip". @@ -719,80 +551,33 @@ config BUSYBOX_CONFIG_FEATURE_IP_ROUTE_DIR config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL bool "ip tunnel" default BUSYBOX_DEFAULT_FEATURE_IP_TUNNEL - depends on BUSYBOX_CONFIG_IP + depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPTUNNEL help Add support for tunneling commands to "ip". config BUSYBOX_CONFIG_FEATURE_IP_RULE bool "ip rule" default BUSYBOX_DEFAULT_FEATURE_IP_RULE - depends on BUSYBOX_CONFIG_IP + depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPRULE help Add support for rule commands to "ip". config BUSYBOX_CONFIG_FEATURE_IP_NEIGH bool "ip neighbor" default BUSYBOX_DEFAULT_FEATURE_IP_NEIGH - depends on BUSYBOX_CONFIG_IP + depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPNEIGH help Add support for neighbor commands to "ip". -config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS - bool "Support short forms of ip commands" - default BUSYBOX_DEFAULT_FEATURE_IP_SHORT_FORMS - depends on BUSYBOX_CONFIG_IP - help - Also support short-form of ip <OBJECT> commands: - ip addr -> ipaddr - ip link -> iplink - ip route -> iproute - ip tunnel -> iptunnel - ip rule -> iprule - ip neigh -> ipneigh - - Say N unless you desparately need the short form of the ip - object commands. - config BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS bool "Support displaying rarely used link types" default BUSYBOX_DEFAULT_FEATURE_IP_RARE_PROTOCOLS - depends on BUSYBOX_CONFIG_IP + depends on BUSYBOX_CONFIG_IP || BUSYBOX_CONFIG_IPADDR || BUSYBOX_CONFIG_IPLINK || BUSYBOX_CONFIG_IPROUTE || BUSYBOX_CONFIG_IPTUNNEL || BUSYBOX_CONFIG_IPRULE || BUSYBOX_CONFIG_IPNEIGH help If you are not going to use links of type "frad", "econet", "bif" etc, you probably don't need to enable this. Ethernet, wireless, infrared, ppp/slip, ip tunnelling link types are supported without this option selected. - -config BUSYBOX_CONFIG_IPADDR - bool - default BUSYBOX_DEFAULT_IPADDR - depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ADDRESS - -config BUSYBOX_CONFIG_IPLINK - bool - default BUSYBOX_DEFAULT_IPLINK - depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_LINK - -config BUSYBOX_CONFIG_IPROUTE - bool - default BUSYBOX_DEFAULT_IPROUTE - depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ROUTE - -config BUSYBOX_CONFIG_IPTUNNEL - bool - default BUSYBOX_DEFAULT_IPTUNNEL - depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_TUNNEL - -config BUSYBOX_CONFIG_IPRULE - bool - default BUSYBOX_DEFAULT_IPRULE - depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_RULE - -config BUSYBOX_CONFIG_IPNEIGH - bool - default BUSYBOX_DEFAULT_IPNEIGH - depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_NEIGH - config BUSYBOX_CONFIG_IPCALC bool "ipcalc" default BUSYBOX_DEFAULT_IPCALC @@ -814,13 +599,84 @@ config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_LONG_OPTS help Support long options for the ipcalc applet. +config BUSYBOX_CONFIG_FAKEIDENTD + bool "fakeidentd" + default BUSYBOX_DEFAULT_FAKEIDENTD + select BUSYBOX_CONFIG_FEATURE_SYSLOG + help + fakeidentd listens on the ident port and returns a predefined + fake value on any query. +config BUSYBOX_CONFIG_NAMEIF + bool "nameif" + default BUSYBOX_DEFAULT_NAMEIF + select BUSYBOX_CONFIG_PLATFORM_LINUX + select BUSYBOX_CONFIG_FEATURE_SYSLOG + help + nameif is used to rename network interface by its MAC address. + Renamed interfaces MUST be in the down state. + It is possible to use a file (default: /etc/mactab) + with list of new interface names and MACs. + Maximum interface name length: IFNAMSIZ = 16 + File fields are separated by space or tab. + File format: + # Comment + new_interface_name XX:XX:XX:XX:XX:XX +config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED + bool "Extended nameif" + default BUSYBOX_DEFAULT_FEATURE_NAMEIF_EXTENDED + depends on BUSYBOX_CONFIG_NAMEIF + help + This extends the nameif syntax to support the bus_info, driver, + phyaddr selectors. The syntax is compatible to the normal nameif. + File format: + new_interface_name driver=asix bus=usb-0000:00:08.2-3 + new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5 + new_interface_name phy_address=2 00:80:C8:38:91:B5 + new_interface_name mac=00:80:C8:38:91:B5 + new_interface_name 00:80:C8:38:91:B5 +config BUSYBOX_CONFIG_NBDCLIENT + bool "nbd-client" + default BUSYBOX_DEFAULT_NBDCLIENT + help + Network block device client +config BUSYBOX_CONFIG_NC + bool "nc" + default BUSYBOX_DEFAULT_NC + help + A simple Unix utility which reads and writes data across network + connections. + +config BUSYBOX_CONFIG_NC_SERVER + bool "Netcat server options (-l)" + default BUSYBOX_DEFAULT_NC_SERVER + depends on BUSYBOX_CONFIG_NC + help + Allow netcat to act as a server. + +config BUSYBOX_CONFIG_NC_EXTRA + bool "Netcat extensions (-eiw and -f FILE)" + default BUSYBOX_DEFAULT_NC_EXTRA + depends on BUSYBOX_CONFIG_NC + help + Add -e (support for executing the rest of the command line after + making or receiving a successful connection), -i (delay interval for + lines sent), -w (timeout for initial connection). + +config BUSYBOX_CONFIG_NC_110_COMPAT + bool "Netcat 1.10 compatibility (+2.5k)" + default BUSYBOX_DEFAULT_NC_110_COMPAT # off specially for Rob + depends on BUSYBOX_CONFIG_NC + help + This option makes nc closely follow original nc-1.10. + The code is about 2.5k bigger. It enables + -s ADDR, -n, -u, -v, -o FILE, -z options, but loses + busybox-specific extensions: -f FILE. config BUSYBOX_CONFIG_NETMSG bool "netmsg" default BUSYBOX_DEFAULT_NETMSG help simple program for sending udp broadcast messages - config BUSYBOX_CONFIG_NETSTAT bool "netstat" default BUSYBOX_DEFAULT_NETSTAT @@ -843,13 +699,11 @@ config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG help Add support for -p flag to print out PID and program name. +700 bytes of code. - config BUSYBOX_CONFIG_NSLOOKUP bool "nslookup" default BUSYBOX_DEFAULT_NSLOOKUP help nslookup is a tool to query Internet name servers. - config BUSYBOX_CONFIG_NTPD bool "ntpd" default BUSYBOX_DEFAULT_NTPD @@ -872,20 +726,39 @@ config BUSYBOX_CONFIG_FEATURE_NTPD_CONF help Make ntpd look in /etc/ntp.conf for peers. Only "server address" is supported. +config BUSYBOX_CONFIG_PING + bool "ping" + default BUSYBOX_DEFAULT_PING + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to + elicit an ICMP ECHO_RESPONSE from a host or gateway. +config BUSYBOX_CONFIG_PING6 + bool "ping6" + default BUSYBOX_DEFAULT_PING6 + depends on BUSYBOX_CONFIG_FEATURE_IPV6 + help + This will give you a ping that can talk IPv6. + +config BUSYBOX_CONFIG_FEATURE_FANCY_PING + bool "Enable fancy ping output" + default BUSYBOX_DEFAULT_FEATURE_FANCY_PING + depends on BUSYBOX_CONFIG_PING || BUSYBOX_CONFIG_PING6 + help + Make the output from the ping applet include statistics, and at the + same time provide full support for ICMP packets. config BUSYBOX_CONFIG_PSCAN bool "pscan" default BUSYBOX_DEFAULT_PSCAN help Simple network port scanner. - config BUSYBOX_CONFIG_ROUTE bool "route" default BUSYBOX_DEFAULT_ROUTE select BUSYBOX_CONFIG_PLATFORM_LINUX help Route displays or manipulates the kernel's IP routing tables. - config BUSYBOX_CONFIG_SLATTACH bool "slattach" default BUSYBOX_DEFAULT_SLATTACH @@ -893,17 +766,6 @@ config BUSYBOX_CONFIG_SLATTACH help slattach is a small utility to attach network interfaces to serial lines. - -#config TC -# bool "tc" -# default y -# help -# show / manipulate traffic control settings -# -#config FEATURE_TC_INGRESS -# def_bool n -# depends on TC - config BUSYBOX_CONFIG_TCPSVD bool "tcpsvd" default BUSYBOX_DEFAULT_TCPSVD @@ -911,6 +773,12 @@ config BUSYBOX_CONFIG_TCPSVD tcpsvd listens on a TCP port and runs a program for each new connection. +config BUSYBOX_CONFIG_UDPSVD + bool "udpsvd" + default BUSYBOX_DEFAULT_UDPSVD + help + udpsvd listens on an UDP port and runs a program for each new + connection. config BUSYBOX_CONFIG_TELNET bool "telnet" default BUSYBOX_DEFAULT_TELNET @@ -936,7 +804,6 @@ config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN remote host you are connecting to. This is useful when you need to log into a machine without telling the username (autologin). This option enables `-a' and `-l USER' arguments. - config BUSYBOX_CONFIG_TELNETD bool "telnetd" default BUSYBOX_DEFAULT_TELNETD @@ -978,7 +845,6 @@ config BUSYBOX_CONFIG_TELNETD with all that done, telnetd _should_ work.... - config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE bool "Support standalone telnetd (not inetd only)" default BUSYBOX_DEFAULT_FEATURE_TELNETD_STANDALONE @@ -1006,7 +872,6 @@ config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD_WAIT This option is rarely used. "tcp nowait" is much more usual way of running tcp services, including telnetd. You most probably want to say N here. - config BUSYBOX_CONFIG_TFTP bool "tftp" default BUSYBOX_DEFAULT_TFTP @@ -1071,7 +936,6 @@ config BUSYBOX_CONFIG_TFTP_DEBUG help Make tftp[d] print debugging messages on stderr. This is useful if you are diagnosing a bug in tftp[d]. - config BUSYBOX_CONFIG_TRACEROUTE bool "traceroute" default BUSYBOX_DEFAULT_TRACEROUTE @@ -1082,33 +946,24 @@ config BUSYBOX_CONFIG_TRACEROUTE config BUSYBOX_CONFIG_TRACEROUTE6 bool "traceroute6" default BUSYBOX_DEFAULT_TRACEROUTE6 - depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_TRACEROUTE + depends on BUSYBOX_CONFIG_FEATURE_IPV6 help Utility to trace the route of IPv6 packets. config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE bool "Enable verbose output" default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_VERBOSE - depends on BUSYBOX_CONFIG_TRACEROUTE + depends on BUSYBOX_CONFIG_TRACEROUTE || BUSYBOX_CONFIG_TRACEROUTE6 help Add some verbosity to traceroute. This includes among other things hostnames and ICMP response types. -config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE - bool "Enable loose source route" - default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_SOURCE_ROUTE - depends on BUSYBOX_CONFIG_TRACEROUTE - help - Add option to specify a loose source route gateway - (8 maximum). - config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP - bool "Use ICMP instead of UDP" + bool "Enable -I option (use ICMP instead of UDP)" default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_USE_ICMP - depends on BUSYBOX_CONFIG_TRACEROUTE + depends on BUSYBOX_CONFIG_TRACEROUTE || BUSYBOX_CONFIG_TRACEROUTE6 help Add option -I to use ICMP ECHO instead of UDP datagrams. - config BUSYBOX_CONFIG_TUNCTL bool "tunctl" default BUSYBOX_DEFAULT_TUNCTL @@ -1123,32 +978,101 @@ config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG help Allow to specify owner and group of newly created interface. 340 bytes of pure bloat. Say no here. +config BUSYBOX_CONFIG_VCONFIG + bool "vconfig" + default BUSYBOX_DEFAULT_VCONFIG + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + Creates, removes, and configures VLAN interfaces +config BUSYBOX_CONFIG_WGET + bool "wget" + default BUSYBOX_DEFAULT_WGET + help + wget is a utility for non-interactive download of files from HTTP + and FTP servers. -source udhcp/Config.in +config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR + bool "Enable a nifty process meter (+2k)" + default BUSYBOX_DEFAULT_FEATURE_WGET_STATUSBAR + depends on BUSYBOX_CONFIG_WGET + help + Enable the transfer progress bar for wget transfers. -config BUSYBOX_CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS - string "ifup udhcpc command line options" - default BUSYBOX_DEFAULT_IFUPDOWN_UDHCPC_CMD_OPTIONS - depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_UDHCPC +config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION + bool "Enable HTTP authentication" + default BUSYBOX_DEFAULT_FEATURE_WGET_AUTHENTICATION + depends on BUSYBOX_CONFIG_WGET help - Command line options to pass to udhcpc from ifup. - Intended to alter options not available in /etc/network/interfaces. - (IE: --syslog --background etc...) + Support authenticated HTTP transfers. -config BUSYBOX_CONFIG_UDPSVD - bool "udpsvd" - default BUSYBOX_DEFAULT_UDPSVD +config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS + bool "Enable long options" + default BUSYBOX_DEFAULT_FEATURE_WGET_LONG_OPTIONS + depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS help - udpsvd listens on an UDP port and runs a program for each new - connection. + Support long options for the wget applet. -config BUSYBOX_CONFIG_VCONFIG - bool "vconfig" - default BUSYBOX_DEFAULT_VCONFIG - select BUSYBOX_CONFIG_PLATFORM_LINUX +config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT + bool "Enable timeout option -T SEC" + default BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT + depends on BUSYBOX_CONFIG_WGET help - Creates, removes, and configures VLAN interfaces + Supports network read and connect timeouts for wget, + so that wget will give up and timeout, through the -T + command line option. + + Currently only connect and network data read timeout are + supported (i.e., timeout is not applied to the DNS query). When + FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option + will work in addition to -T. + +config BUSYBOX_CONFIG_FEATURE_WGET_OPENSSL + bool "Try to connect to HTTPS using openssl" + default BUSYBOX_DEFAULT_FEATURE_WGET_OPENSSL + depends on BUSYBOX_CONFIG_WGET + help + Choose how wget establishes SSL connection for https:// URLs. + + Busybox itself contains no SSL code. wget will spawn + a helper program to talk over HTTPS. + + OpenSSL has a simple SSL client for debug purposes. + If you select "openssl" helper, wget will effectively run: + "openssl s_client -quiet -connect hostname:443 + -servername hostname 2>/dev/null" and pipe its data + through it. -servername is not used if hostname is numeric. + Note inconvenient API: host resolution is done twice, + and there is no guarantee openssl's idea of IPv6 address + format is the same as ours. + Another problem is that s_client prints debug information + to stderr, and it needs to be suppressed. This means + all error messages get suppressed too. + openssl is also a big binary, often dynamically linked + against ~15 libraries. + +config BUSYBOX_CONFIG_FEATURE_WGET_SSL_HELPER + bool "Try to connect to HTTPS using ssl_helper" + default BUSYBOX_DEFAULT_FEATURE_WGET_SSL_HELPER + depends on BUSYBOX_CONFIG_WGET + help + Choose how wget establishes SSL connection for https:// URLs. + + Busybox itself contains no SSL code. wget will spawn + a helper program to talk over HTTPS. + ssl_helper is a tool which can be built statically + from busybox sources against a small embedded SSL library. + Please see networking/ssl_helper/README. + It does not require double host resolution and emits + error messages to stderr. + + Precompiled static binary may be available at + http://busybox.net/downloads/binaries/ +config BUSYBOX_CONFIG_WHOIS + bool "whois" + default BUSYBOX_DEFAULT_WHOIS + help + whois is a client for the whois directory service config BUSYBOX_CONFIG_ZCIP bool "zcip" default BUSYBOX_DEFAULT_ZCIP @@ -1162,4 +1086,15 @@ config BUSYBOX_CONFIG_ZCIP See http://www.zeroconf.org for further details, and "zcip.script" in the busybox examples. +source udhcp/Config.in + +config BUSYBOX_CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS + string "ifup udhcpc command line options" + default BUSYBOX_DEFAULT_IFUPDOWN_UDHCPC_CMD_OPTIONS + depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_UDHCPC + help + Command line options to pass to udhcpc from ifup. + Intended to alter options not available in /etc/network/interfaces. + (IE: --syslog --background etc...) + endmenu |