aboutsummaryrefslogtreecommitdiffstats
path: root/package/utils/busybox/config/miscutils
diff options
context:
space:
mode:
Diffstat (limited to 'package/utils/busybox/config/miscutils')
-rw-r--r--package/utils/busybox/config/miscutils/Config.in402
1 files changed, 201 insertions, 201 deletions
diff --git a/package/utils/busybox/config/miscutils/Config.in b/package/utils/busybox/config/miscutils/Config.in
index 61c5458b63..1f378206b1 100644
--- a/package/utils/busybox/config/miscutils/Config.in
+++ b/package/utils/busybox/config/miscutils/Config.in
@@ -11,34 +11,34 @@ config BUSYBOX_CONFIG_ADJTIMEX
default BUSYBOX_DEFAULT_ADJTIMEX
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Adjtimex reads and optionally sets adjustment parameters for
- the Linux clock adjustment algorithm.
+ Adjtimex reads and optionally sets adjustment parameters for
+ the Linux clock adjustment algorithm.
config BUSYBOX_CONFIG_BBCONFIG
bool "bbconfig"
default BUSYBOX_DEFAULT_BBCONFIG
help
- The bbconfig applet will print the config file with which
- busybox was built.
+ The bbconfig applet will print the config file with which
+ busybox was built.
config BUSYBOX_CONFIG_FEATURE_COMPRESS_BBCONFIG
bool "Compress bbconfig data"
default BUSYBOX_DEFAULT_FEATURE_COMPRESS_BBCONFIG
depends on BUSYBOX_CONFIG_BBCONFIG
help
- Store bbconfig data in compressed form, uncompress them on-the-fly
- before output.
+ Store bbconfig data in compressed form, uncompress them on-the-fly
+ before output.
- If you have a really tiny busybox with few applets enabled (and
- bunzip2 isn't one of them), the overhead of the decompressor might
- be noticeable. Also, if you run executables directly from ROM
- and have very little memory, this might not be a win. Otherwise,
- you probably want this.
+ If you have a really tiny busybox with few applets enabled (and
+ bunzip2 isn't one of them), the overhead of the decompressor might
+ be noticeable. Also, if you run executables directly from ROM
+ and have very little memory, this might not be a win. Otherwise,
+ you probably want this.
config BUSYBOX_CONFIG_BEEP
bool "beep"
default BUSYBOX_DEFAULT_BEEP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- The beep applets beeps in a given freq/Hz.
+ The beep applets beeps in a given freq/Hz.
config BUSYBOX_CONFIG_FEATURE_BEEP_FREQ
int "default frequency"
@@ -46,7 +46,7 @@ config BUSYBOX_CONFIG_FEATURE_BEEP_FREQ
default BUSYBOX_DEFAULT_FEATURE_BEEP_FREQ
depends on BUSYBOX_CONFIG_BEEP
help
- Frequency for default beep.
+ Frequency for default beep.
config BUSYBOX_CONFIG_FEATURE_BEEP_LENGTH_MS
int "default length"
@@ -54,91 +54,91 @@ config BUSYBOX_CONFIG_FEATURE_BEEP_LENGTH_MS
default BUSYBOX_DEFAULT_FEATURE_BEEP_LENGTH_MS
depends on BUSYBOX_CONFIG_BEEP
help
- Length in ms for default beep.
+ Length in ms for default beep.
config BUSYBOX_CONFIG_CHAT
bool "chat"
default BUSYBOX_DEFAULT_CHAT
help
- Simple chat utility.
+ Simple chat utility.
config BUSYBOX_CONFIG_FEATURE_CHAT_NOFAIL
bool "Enable NOFAIL expect strings"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_NOFAIL
help
- When enabled expect strings which are started with a dash trigger
- no-fail mode. That is when expectation is not met within timeout
- the script is not terminated but sends next SEND string and waits
- for next EXPECT string. This allows to compose far more flexible
- scripts.
+ When enabled expect strings which are started with a dash trigger
+ no-fail mode. That is when expectation is not met within timeout
+ the script is not terminated but sends next SEND string and waits
+ for next EXPECT string. This allows to compose far more flexible
+ scripts.
config BUSYBOX_CONFIG_FEATURE_CHAT_TTY_HIFI
bool "Force STDIN to be a TTY"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_TTY_HIFI
help
- Original chat always treats STDIN as a TTY device and sets for it
- so-called raw mode. This option turns on such behaviour.
+ Original chat always treats STDIN as a TTY device and sets for it
+ so-called raw mode. This option turns on such behaviour.
config BUSYBOX_CONFIG_FEATURE_CHAT_IMPLICIT_CR
bool "Enable implicit Carriage Return"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_IMPLICIT_CR
help
- When enabled make chat to terminate all SEND strings with a "\r"
- unless "\c" is met anywhere in the string.
+ When enabled make chat to terminate all SEND strings with a "\r"
+ unless "\c" is met anywhere in the string.
config BUSYBOX_CONFIG_FEATURE_CHAT_SWALLOW_OPTS
bool "Swallow options"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_SWALLOW_OPTS
help
- Busybox chat require no options. To make it not fail when used
- in place of original chat (which has a bunch of options) turn
- this on.
+ Busybox chat require no options. To make it not fail when used
+ in place of original chat (which has a bunch of options) turn
+ this on.
config BUSYBOX_CONFIG_FEATURE_CHAT_SEND_ESCAPES
bool "Support weird SEND escapes"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_SEND_ESCAPES
help
- Original chat uses some escape sequences in SEND arguments which
- are not sent to device but rather performs special actions.
- E.g. "\K" means to send a break sequence to device.
- "\d" delays execution for a second, "\p" -- for a 1/100 of second.
- Before turning this option on think twice: do you really need them?
+ Original chat uses some escape sequences in SEND arguments which
+ are not sent to device but rather performs special actions.
+ E.g. "\K" means to send a break sequence to device.
+ "\d" delays execution for a second, "\p" -- for a 1/100 of second.
+ Before turning this option on think twice: do you really need them?
config BUSYBOX_CONFIG_FEATURE_CHAT_VAR_ABORT_LEN
bool "Support variable-length ABORT conditions"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_VAR_ABORT_LEN
help
- Original chat uses fixed 50-bytes length ABORT conditions. Say N here.
+ Original chat uses fixed 50-bytes length ABORT conditions. Say N here.
config BUSYBOX_CONFIG_FEATURE_CHAT_CLR_ABORT
bool "Support revoking of ABORT conditions"
depends on BUSYBOX_CONFIG_CHAT
default BUSYBOX_DEFAULT_FEATURE_CHAT_CLR_ABORT
help
- Support CLR_ABORT directive.
+ Support CLR_ABORT directive.
config BUSYBOX_CONFIG_CONSPY
bool "conspy"
default BUSYBOX_DEFAULT_CONSPY
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- A text-mode VNC like program for Linux virtual terminals.
- example: conspy NUM shared access to console num
- or conspy -nd NUM screenshot of console num
- or conspy -cs NUM poor man's GNU screen like
+ A text-mode VNC like program for Linux virtual terminals.
+ example: conspy NUM shared access to console num
+ or conspy -nd NUM screenshot of console num
+ or conspy -cs NUM poor man's GNU screen like
config BUSYBOX_CONFIG_CROND
bool "crond"
default BUSYBOX_DEFAULT_CROND
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- Crond is a background daemon that parses individual crontab
- files and executes commands on behalf of the users in question.
- This is a port of dcron from slackware. It uses files of the
- format /var/spool/cron/crontabs/<username> files, for example:
+ Crond is a background daemon that parses individual crontab
+ files and executes commands on behalf of the users in question.
+ This is a port of dcron from slackware. It uses files of the
+ format /var/spool/cron/crontabs/<username> files, for example:
$ cat /var/spool/cron/crontabs/root
# Run daily cron jobs at 4:40 every day:
40 4 * * * /etc/cron/daily > /dev/null 2>&1
@@ -148,78 +148,78 @@ config BUSYBOX_CONFIG_FEATURE_CROND_D
depends on BUSYBOX_CONFIG_CROND
default BUSYBOX_DEFAULT_FEATURE_CROND_D
help
- -d N sets loglevel (0:most verbose) and directs all output to stderr.
+ -d N sets loglevel (0:most verbose) and directs all output to stderr.
config BUSYBOX_CONFIG_FEATURE_CROND_CALL_SENDMAIL
bool "Report command output via email (using sendmail)"
default BUSYBOX_DEFAULT_FEATURE_CROND_CALL_SENDMAIL
depends on BUSYBOX_CONFIG_CROND
help
- Command output will be sent to corresponding user via email.
+ Command output will be sent to corresponding user via email.
config BUSYBOX_CONFIG_FEATURE_CROND_DIR
string "crond spool directory"
default BUSYBOX_DEFAULT_FEATURE_CROND_DIR
depends on BUSYBOX_CONFIG_CROND || BUSYBOX_CONFIG_CRONTAB
help
- Location of crond spool.
+ Location of crond spool.
config BUSYBOX_CONFIG_CRONTAB
bool "crontab"
default BUSYBOX_DEFAULT_CRONTAB
help
- Crontab manipulates the crontab for a particular user. Only
- the superuser may specify a different user and/or crontab directory.
- Note that Busybox binary must be setuid root for this applet to
- work properly.
+ Crontab manipulates the crontab for a particular user. Only
+ the superuser may specify a different user and/or crontab directory.
+ Note that Busybox binary must be setuid root for this applet to
+ work properly.
config BUSYBOX_CONFIG_DC
bool "dc"
default BUSYBOX_DEFAULT_DC
help
- Dc is a reverse-polish desk calculator which supports unlimited
- precision arithmetic.
+ Dc is a reverse-polish desk calculator which supports unlimited
+ precision arithmetic.
config BUSYBOX_CONFIG_FEATURE_DC_LIBM
bool "Enable power and exp functions (requires libm)"
default BUSYBOX_DEFAULT_FEATURE_DC_LIBM
depends on BUSYBOX_CONFIG_DC
help
- Enable power and exp functions.
- NOTE: This will require libm to be present for linking.
+ Enable power and exp functions.
+ NOTE: This will require libm to be present for linking.
config BUSYBOX_CONFIG_DEVFSD
bool "devfsd (obsolete)"
default BUSYBOX_DEFAULT_DEVFSD
select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- This is deprecated and should NOT be used anymore.
- Use linux >= 2.6 (optionally with hotplug) and mdev instead!
- See docs/mdev.txt for detailed instructions on how to use mdev
- instead.
+ This is deprecated and should NOT be used anymore.
+ Use linux >= 2.6 (optionally with hotplug) and mdev instead!
+ See docs/mdev.txt for detailed instructions on how to use mdev
+ instead.
- Provides compatibility with old device names on a devfs systems.
- You should set it to true if you have devfs enabled.
- The following keywords in devsfd.conf are supported:
- "CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE",
- "PERMISSIONS", "EXECUTE", "COPY", "IGNORE",
- "MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT".
+ Provides compatibility with old device names on a devfs systems.
+ You should set it to true if you have devfs enabled.
+ The following keywords in devsfd.conf are supported:
+ "CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE",
+ "PERMISSIONS", "EXECUTE", "COPY", "IGNORE",
+ "MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT".
- But only if they are written UPPERCASE!!!!!!!!
+ But only if they are written UPPERCASE!!!!!!!!
config BUSYBOX_CONFIG_DEVFSD_MODLOAD
bool "Adds support for MODLOAD keyword in devsfd.conf"
default BUSYBOX_DEFAULT_DEVFSD_MODLOAD
depends on BUSYBOX_CONFIG_DEVFSD
help
- This actually doesn't work with busybox modutils but needs
- the external modutils.
+ This actually doesn't work with busybox modutils but needs
+ the external modutils.
config BUSYBOX_CONFIG_DEVFSD_FG_NP
bool "Enable the -fg and -np options"
default BUSYBOX_DEFAULT_DEVFSD_FG_NP
depends on BUSYBOX_CONFIG_DEVFSD
help
- -fg Run the daemon in the foreground.
- -np Exit after parsing the configuration file.
+ -fg Run the daemon in the foreground.
+ -np Exit after parsing the configuration file.
Do not poll for events.
config BUSYBOX_CONFIG_DEVFSD_VERBOSE
@@ -227,170 +227,170 @@ config BUSYBOX_CONFIG_DEVFSD_VERBOSE
default BUSYBOX_DEFAULT_DEVFSD_VERBOSE
depends on BUSYBOX_CONFIG_DEVFSD
help
- Increases logging to stderr or syslog.
+ Increases logging to stderr or syslog.
config BUSYBOX_CONFIG_FEATURE_DEVFS
bool "Use devfs names for all devices (obsolete)"
default BUSYBOX_DEFAULT_FEATURE_DEVFS
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- This is obsolete and should NOT be used anymore.
- Use linux >= 2.6 (optionally with hotplug) and mdev instead!
+ This is obsolete and should NOT be used anymore.
+ Use linux >= 2.6 (optionally with hotplug) and mdev instead!
- For legacy systems -- if there is no way around devfsd -- this
- tells busybox to look for names like /dev/loop/0 instead of
- /dev/loop0. If your /dev directory has normal names instead of
- devfs names, you don't want this.
+ For legacy systems -- if there is no way around devfsd -- this
+ tells busybox to look for names like /dev/loop/0 instead of
+ /dev/loop0. If your /dev directory has normal names instead of
+ devfs names, you don't want this.
config BUSYBOX_CONFIG_DEVMEM
bool "devmem"
default BUSYBOX_DEFAULT_DEVMEM
help
- devmem is a small program that reads and writes from physical
- memory using /dev/mem.
+ devmem is a small program that reads and writes from physical
+ memory using /dev/mem.
config BUSYBOX_CONFIG_FBSPLASH
bool "fbsplash"
default BUSYBOX_DEFAULT_FBSPLASH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Shows splash image and progress bar on framebuffer device.
- Can be used during boot phase of an embedded device. ~2kb.
- Usage:
- - use kernel option 'vga=xxx' or otherwise enable fb device.
- - put somewhere fbsplash.cfg file and an image in .ppm format.
- - $ setsid fbsplash [params] &
+ Shows splash image and progress bar on framebuffer device.
+ Can be used during boot phase of an embedded device. ~2kb.
+ Usage:
+ - use kernel option 'vga=xxx' or otherwise enable fb device.
+ - put somewhere fbsplash.cfg file and an image in .ppm format.
+ - $ setsid fbsplash [params] &
-c: hide cursor
-d /dev/fbN: framebuffer device (if not /dev/fb0)
-s path_to_image_file (can be "-" for stdin)
-i path_to_cfg_file (can be "-" for stdin)
-f path_to_fifo (can be "-" for stdin)
- - if you want to run it only in presence of kernel parameter:
+ - if you want to run it only in presence of kernel parameter:
grep -q "fbsplash=on" </proc/cmdline && setsid fbsplash [params] &
- - commands for fifo:
+ - commands for fifo:
"NN" (ASCII decimal number) - percentage to show on progress bar
"exit" - well you guessed it
config BUSYBOX_CONFIG_FLASH_ERASEALL
bool "flash_eraseall"
default BUSYBOX_DEFAULT_FLASH_ERASEALL # doesn't build on Ubuntu 8.04
help
- The flash_eraseall binary from mtd-utils as of git head c4c6a59eb.
- This utility is used to erase the whole MTD device.
+ The flash_eraseall binary from mtd-utils as of git head c4c6a59eb.
+ This utility is used to erase the whole MTD device.
config BUSYBOX_CONFIG_FLASH_LOCK
bool "flash_lock"
default BUSYBOX_DEFAULT_FLASH_LOCK # doesn't build on Ubuntu 8.04
help
- The flash_lock binary from mtd-utils as of git head 5ec0c10d0. This
- utility locks part or all of the flash device.
+ The flash_lock binary from mtd-utils as of git head 5ec0c10d0. This
+ utility locks part or all of the flash device.
config BUSYBOX_CONFIG_FLASH_UNLOCK
bool "flash_unlock"
default BUSYBOX_DEFAULT_FLASH_UNLOCK # doesn't build on Ubuntu 8.04
help
- The flash_unlock binary from mtd-utils as of git head 5ec0c10d0. This
- utility unlocks part or all of the flash device.
+ The flash_unlock binary from mtd-utils as of git head 5ec0c10d0. This
+ utility unlocks part or all of the flash device.
config BUSYBOX_CONFIG_FLASHCP
bool "flashcp"
default BUSYBOX_DEFAULT_FLASHCP # doesn't build on Ubuntu 8.04
help
- The flashcp binary, inspired by mtd-utils as of git head 5eceb74f7.
- This utility is used to copy images into a MTD device.
+ The flashcp binary, inspired by mtd-utils as of git head 5eceb74f7.
+ This utility is used to copy images into a MTD device.
config BUSYBOX_CONFIG_HDPARM
bool "hdparm"
default BUSYBOX_DEFAULT_HDPARM
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Get/Set hard drive parameters. Primarily intended for ATA
- drives. Adds about 13k (or around 30k if you enable the
- FEATURE_HDPARM_GET_IDENTITY option)....
+ Get/Set hard drive parameters. Primarily intended for ATA
+ drives. Adds about 13k (or around 30k if you enable the
+ FEATURE_HDPARM_GET_IDENTITY option)....
config BUSYBOX_CONFIG_FEATURE_HDPARM_GET_IDENTITY
bool "Support obtaining detailed information directly from drives"
default BUSYBOX_DEFAULT_FEATURE_HDPARM_GET_IDENTITY
depends on BUSYBOX_CONFIG_HDPARM
help
- Enable the -I and -i options to obtain detailed information
- directly from drives about their capabilities and supported ATA
- feature set. If no device name is specified, hdparm will read
- identify data from stdin. Enabling this option will add about 16k...
+ Enable the -I and -i options to obtain detailed information
+ directly from drives about their capabilities and supported ATA
+ feature set. If no device name is specified, hdparm will read
+ identify data from stdin. Enabling this option will add about 16k...
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF
bool "Register an IDE interface (DANGEROUS)"
default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_SCAN_HWIF
depends on BUSYBOX_CONFIG_HDPARM
help
- Enable the 'hdparm -R' option to register an IDE interface.
- This is dangerous stuff, so you should probably say N.
+ Enable the 'hdparm -R' option to register an IDE interface.
+ This is dangerous stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
bool "Un-register an IDE interface (DANGEROUS)"
default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
depends on BUSYBOX_CONFIG_HDPARM
help
- Enable the 'hdparm -U' option to un-register an IDE interface.
- This is dangerous stuff, so you should probably say N.
+ Enable the 'hdparm -U' option to un-register an IDE interface.
+ This is dangerous stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET
bool "Perform device reset (DANGEROUS)"
default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_DRIVE_RESET
depends on BUSYBOX_CONFIG_HDPARM
help
- Enable the 'hdparm -w' option to perform a device reset.
- This is dangerous stuff, so you should probably say N.
+ Enable the 'hdparm -w' option to perform a device reset.
+ This is dangerous stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
bool "Tristate device for hotswap (DANGEROUS)"
default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
depends on BUSYBOX_CONFIG_HDPARM
help
- Enable the 'hdparm -x' option to tristate device for hotswap,
- and the '-b' option to get/set bus state. This is dangerous
- stuff, so you should probably say N.
+ Enable the 'hdparm -x' option to tristate device for hotswap,
+ and the '-b' option to get/set bus state. This is dangerous
+ stuff, so you should probably say N.
config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA
bool "Get/set using_dma flag"
default BUSYBOX_DEFAULT_FEATURE_HDPARM_HDIO_GETSET_DMA
depends on BUSYBOX_CONFIG_HDPARM
help
- Enable the 'hdparm -d' option to get/set using_dma flag.
+ Enable the 'hdparm -d' option to get/set using_dma flag.
config BUSYBOX_CONFIG_I2CGET
bool "i2cget"
default BUSYBOX_DEFAULT_I2CGET
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Read from I2C/SMBus chip registers.
+ Read from I2C/SMBus chip registers.
config BUSYBOX_CONFIG_I2CSET
bool "i2cset"
default BUSYBOX_DEFAULT_I2CSET
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Set I2C registers.
+ Set I2C registers.
config BUSYBOX_CONFIG_I2CDUMP
bool "i2cdump"
default BUSYBOX_DEFAULT_I2CDUMP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Examine I2C registers.
+ Examine I2C registers.
config BUSYBOX_CONFIG_I2CDETECT
bool "i2cdetect"
default BUSYBOX_DEFAULT_I2CDETECT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Detect I2C chips.
+ Detect I2C chips.
config BUSYBOX_CONFIG_INOTIFYD
bool "inotifyd"
default BUSYBOX_DEFAULT_INOTIFYD # doesn't build on Knoppix 5
help
- Simple inotify daemon. Reports filesystem changes. Requires
- kernel >= 2.6.13
+ Simple inotify daemon. Reports filesystem changes. Requires
+ kernel >= 2.6.13
config BUSYBOX_CONFIG_LESS
bool "less"
default BUSYBOX_DEFAULT_LESS
help
- 'less' is a pager, meaning that it displays text files. It possesses
- a wide array of features, and is an improvement over 'more'.
+ 'less' is a pager, meaning that it displays text files. It possesses
+ a wide array of features, and is an improvement over 'more'.
config BUSYBOX_CONFIG_FEATURE_LESS_MAXLINES
int "Max number of input lines less will try to eat"
@@ -402,64 +402,64 @@ config BUSYBOX_CONFIG_FEATURE_LESS_BRACKETS
default BUSYBOX_DEFAULT_FEATURE_LESS_BRACKETS
depends on BUSYBOX_CONFIG_LESS
help
- This option adds the capability to search for matching left and right
- brackets, facilitating programming.
+ This option adds the capability to search for matching left and right
+ brackets, facilitating programming.
config BUSYBOX_CONFIG_FEATURE_LESS_FLAGS
bool "Enable -m/-M"
default BUSYBOX_DEFAULT_FEATURE_LESS_FLAGS
depends on BUSYBOX_CONFIG_LESS
help
- The -M/-m flag enables a more sophisticated status line.
+ The -M/-m flag enables a more sophisticated status line.
config BUSYBOX_CONFIG_FEATURE_LESS_TRUNCATE
bool "Enable -S"
default BUSYBOX_DEFAULT_FEATURE_LESS_TRUNCATE
depends on BUSYBOX_CONFIG_LESS
help
- The -S flag causes long lines to be truncated rather than
- wrapped.
+ The -S flag causes long lines to be truncated rather than
+ wrapped.
config BUSYBOX_CONFIG_FEATURE_LESS_MARKS
bool "Enable marks"
default BUSYBOX_DEFAULT_FEATURE_LESS_MARKS
depends on BUSYBOX_CONFIG_LESS
help
- Marks enable positions in a file to be stored for easy reference.
+ Marks enable positions in a file to be stored for easy reference.
config BUSYBOX_CONFIG_FEATURE_LESS_REGEXP
bool "Enable regular expressions"
default BUSYBOX_DEFAULT_FEATURE_LESS_REGEXP
depends on BUSYBOX_CONFIG_LESS
help
- Enable regular expressions, allowing complex file searches.
+ Enable regular expressions, allowing complex file searches.
config BUSYBOX_CONFIG_FEATURE_LESS_WINCH
bool "Enable automatic resizing on window size changes"
default BUSYBOX_DEFAULT_FEATURE_LESS_WINCH
depends on BUSYBOX_CONFIG_LESS
help
- Makes less track window size changes.
+ Makes less track window size changes.
config BUSYBOX_CONFIG_FEATURE_LESS_ASK_TERMINAL
bool "Use 'tell me cursor position' ESC sequence to measure window"
default BUSYBOX_DEFAULT_FEATURE_LESS_ASK_TERMINAL
depends on BUSYBOX_CONFIG_FEATURE_LESS_WINCH
help
- Makes less track window size changes.
- If terminal size can't be retrieved and $LINES/$COLUMNS are not set,
- this option makes less perform a last-ditch effort to find it:
- position cursor to 999,999 and ask terminal to report real
- cursor position using "ESC [ 6 n" escape sequence, then read stdin.
- This is not clean but helps a lot on serial lines and such.
+ Makes less track window size changes.
+ If terminal size can't be retrieved and $LINES/$COLUMNS are not set,
+ this option makes less perform a last-ditch effort to find it:
+ position cursor to 999,999 and ask terminal to report real
+ cursor position using "ESC [ 6 n" escape sequence, then read stdin.
+ This is not clean but helps a lot on serial lines and such.
config BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD
bool "Enable flag changes ('-' command)"
default BUSYBOX_DEFAULT_FEATURE_LESS_DASHCMD
depends on BUSYBOX_CONFIG_LESS
help
- This enables the ability to change command-line flags within
- less itself ('-' keyboard command).
+ This enables the ability to change command-line flags within
+ less itself ('-' keyboard command).
config BUSYBOX_CONFIG_FEATURE_LESS_LINENUMS
bool "Enable -N (dynamic switching of line numbers)"
@@ -469,34 +469,34 @@ config BUSYBOX_CONFIG_LOCK
bool "lock"
default BUSYBOX_DEFAULT_LOCK
help
- Small utility for using locks in scripts
+ Small utility for using locks in scripts
config BUSYBOX_CONFIG_LSSCSI
bool "lsscsi"
default BUSYBOX_DEFAULT_LSSCSI
#select PLATFORM_LINUX
help
- lsscsi is a utility for displaying information about SCSI buses in the
- system and devices connected to them.
+ lsscsi is a utility for displaying information about SCSI buses in the
+ system and devices connected to them.
- This version uses sysfs (/sys/bus/scsi/devices) only.
+ This version uses sysfs (/sys/bus/scsi/devices) only.
config BUSYBOX_CONFIG_MAKEDEVS
bool "makedevs"
default BUSYBOX_DEFAULT_MAKEDEVS
help
- 'makedevs' is a utility used to create a batch of devices with
- one command.
+ 'makedevs' is a utility used to create a batch of devices with
+ one command.
- There are two choices for command line behaviour, the interface
- as used by LEAF/Linux Router Project, or a device table file.
+ There are two choices for command line behaviour, the interface
+ as used by LEAF/Linux Router Project, or a device table file.
- 'leaf' is traditionally what busybox follows, it allows multiple
- devices of a particluar type to be created per command.
- e.g. /dev/hda[0-9]
- Device properties are passed as command line arguments.
+ 'leaf' is traditionally what busybox follows, it allows multiple
+ devices of a particluar type to be created per command.
+ e.g. /dev/hda[0-9]
+ Device properties are passed as command line arguments.
- 'table' reads device properties from a file or stdin, allowing
- a batch of unrelated devices to be made with one command.
- User/group names are allowed as an alternative to uid/gid.
+ 'table' reads device properties from a file or stdin, allowing
+ a batch of unrelated devices to be made with one command.
+ User/group names are allowed as an alternative to uid/gid.
choice
prompt "Choose makedevs behaviour"
@@ -514,178 +514,178 @@ config BUSYBOX_CONFIG_MAN
bool "man"
default BUSYBOX_DEFAULT_MAN
help
- Format and display manual pages.
+ Format and display manual pages.
config BUSYBOX_CONFIG_MICROCOM
bool "microcom"
default BUSYBOX_DEFAULT_MICROCOM
help
- The poor man's minicom utility for chatting with serial port devices.
+ The poor man's minicom utility for chatting with serial port devices.
config BUSYBOX_CONFIG_MT
bool "mt"
default BUSYBOX_DEFAULT_MT
help
- mt is used to control tape devices. You can use the mt utility
- to advance or rewind a tape past a specified number of archive
- files on the tape.
+ mt is used to control tape devices. You can use the mt utility
+ to advance or rewind a tape past a specified number of archive
+ files on the tape.
config BUSYBOX_CONFIG_NANDWRITE
bool "nandwrite"
default BUSYBOX_DEFAULT_NANDWRITE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Write to the specified MTD device, with bad blocks awareness
+ Write to the specified MTD device, with bad blocks awareness
config BUSYBOX_CONFIG_NANDDUMP
bool "nanddump"
default BUSYBOX_DEFAULT_NANDDUMP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Dump the content of raw NAND chip
+ Dump the content of raw NAND chip
config BUSYBOX_CONFIG_PARTPROBE
bool "partprobe"
default BUSYBOX_DEFAULT_PARTPROBE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Ask kernel to rescan partition table.
+ Ask kernel to rescan partition table.
config BUSYBOX_CONFIG_RAIDAUTORUN
bool "raidautorun"
default BUSYBOX_DEFAULT_RAIDAUTORUN
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- raidautorun tells the kernel md driver to
- search and start RAID arrays.
+ raidautorun tells the kernel md driver to
+ search and start RAID arrays.
config BUSYBOX_CONFIG_READAHEAD
bool "readahead"
default BUSYBOX_DEFAULT_READAHEAD
depends on BUSYBOX_CONFIG_LFS
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Preload the files listed on the command line into RAM cache so that
- subsequent reads on these files will not block on disk I/O.
+ Preload the files listed on the command line into RAM cache so that
+ subsequent reads on these files will not block on disk I/O.
- This applet just calls the readahead(2) system call on each file.
- It is mainly useful in system startup scripts to preload files
- or executables before they are used. When used at the right time
- (in particular when a CPU bound process is running) it can
- significantly speed up system startup.
+ This applet just calls the readahead(2) system call on each file.
+ It is mainly useful in system startup scripts to preload files
+ or executables before they are used. When used at the right time
+ (in particular when a CPU bound process is running) it can
+ significantly speed up system startup.
- As readahead(2) blocks until each file has been read, it is best to
- run this applet as a background job.
+ As readahead(2) blocks until each file has been read, it is best to
+ run this applet as a background job.
config BUSYBOX_CONFIG_RFKILL
bool "rfkill"
default BUSYBOX_DEFAULT_RFKILL # doesn't build on Ubuntu 9.04
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Enable/disable wireless devices.
+ Enable/disable wireless devices.
- rfkill list : list all wireless devices
- rfkill list bluetooth : list all bluetooth devices
- rfkill list 1 : list device corresponding to the given index
- rfkill block|unblock wlan : block/unblock all wlan(wifi) devices
+ rfkill list : list all wireless devices
+ rfkill list bluetooth : list all bluetooth devices
+ rfkill list 1 : list device corresponding to the given index
+ rfkill block|unblock wlan : block/unblock all wlan(wifi) devices
config BUSYBOX_CONFIG_RUNLEVEL
bool "runlevel"
default BUSYBOX_DEFAULT_RUNLEVEL
depends on BUSYBOX_CONFIG_FEATURE_UTMP
help
- find the current and previous system runlevel.
+ find the current and previous system runlevel.
- This applet uses utmp but does not rely on busybox supporing
- utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc.
+ This applet uses utmp but does not rely on busybox supporing
+ utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc.
config BUSYBOX_CONFIG_RX
bool "rx"
default BUSYBOX_DEFAULT_RX
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Receive files using the Xmodem protocol.
+ Receive files using the Xmodem protocol.
config BUSYBOX_CONFIG_SETSERIAL
bool "setserial"
default BUSYBOX_DEFAULT_SETSERIAL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Retrieve or set Linux serial port.
+ Retrieve or set Linux serial port.
config BUSYBOX_CONFIG_STRINGS
bool "strings"
default BUSYBOX_DEFAULT_STRINGS
help
- strings prints the printable character sequences for each file
- specified.
+ strings prints the printable character sequences for each file
+ specified.
config BUSYBOX_CONFIG_TIME
bool "time"
default BUSYBOX_DEFAULT_TIME
help
- The time command runs the specified program with the given arguments.
- When the command finishes, time writes a message to standard output
- giving timing statistics about this program run.
+ The time command runs the specified program with the given arguments.
+ When the command finishes, time writes a message to standard output
+ giving timing statistics about this program run.
config BUSYBOX_CONFIG_TTYSIZE
bool "ttysize"
default BUSYBOX_DEFAULT_TTYSIZE
help
- A replacement for "stty size". Unlike stty, can report only width,
- only height, or both, in any order. It also does not complain on
- error, but returns default 80x24.
- Usage in shell scripts: width=`ttysize w`.
+ A replacement for "stty size". Unlike stty, can report only width,
+ only height, or both, in any order. It also does not complain on
+ error, but returns default 80x24.
+ Usage in shell scripts: width=`ttysize w`.
config BUSYBOX_CONFIG_UBIATTACH
bool "ubiattach"
default BUSYBOX_DEFAULT_UBIATTACH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Attach MTD device to an UBI device.
+ Attach MTD device to an UBI device.
config BUSYBOX_CONFIG_UBIDETACH
bool "ubidetach"
default BUSYBOX_DEFAULT_UBIDETACH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Detach MTD device from an UBI device.
+ Detach MTD device from an UBI device.
config BUSYBOX_CONFIG_UBIMKVOL
bool "ubimkvol"
default BUSYBOX_DEFAULT_UBIMKVOL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Create a UBI volume.
+ Create a UBI volume.
config BUSYBOX_CONFIG_UBIRMVOL
bool "ubirmvol"
default BUSYBOX_DEFAULT_UBIRMVOL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Delete a UBI volume.
+ Delete a UBI volume.
config BUSYBOX_CONFIG_UBIRSVOL
bool "ubirsvol"
default BUSYBOX_DEFAULT_UBIRSVOL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Resize a UBI volume.
+ Resize a UBI volume.
config BUSYBOX_CONFIG_UBIUPDATEVOL
bool "ubiupdatevol"
default BUSYBOX_DEFAULT_UBIUPDATEVOL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Update a UBI volume.
+ Update a UBI volume.
config BUSYBOX_CONFIG_UBIRENAME
bool "ubirename"
default BUSYBOX_DEFAULT_UBIRENAME
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Utility to rename UBI volumes
+ Utility to rename UBI volumes
config BUSYBOX_CONFIG_VOLNAME
bool "volname"
default BUSYBOX_DEFAULT_VOLNAME
help
- Prints a CD-ROM volume name.
+ Prints a CD-ROM volume name.
config BUSYBOX_CONFIG_WATCHDOG
bool "watchdog"
default BUSYBOX_DEFAULT_WATCHDOG
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- The watchdog utility is used with hardware or software watchdog
- device drivers. It opens the specified watchdog device special file
- and periodically writes a magic character to the device. If the
- watchdog applet ever fails to write the magic character within a
- certain amount of time, the watchdog device assumes the system has
- hung, and will cause the hardware to reboot.
+ The watchdog utility is used with hardware or software watchdog
+ device drivers. It opens the specified watchdog device special file
+ and periodically writes a magic character to the device. If the
+ watchdog applet ever fails to write the magic character within a
+ certain amount of time, the watchdog device assumes the system has
+ hung, and will cause the hardware to reboot.
endmenu