diff options
Diffstat (limited to 'package/uboot-ifxmips/files/include/configs/danube.h')
| -rw-r--r-- | package/uboot-ifxmips/files/include/configs/danube.h | 273 |
1 files changed, 0 insertions, 273 deletions
diff --git a/package/uboot-ifxmips/files/include/configs/danube.h b/package/uboot-ifxmips/files/include/configs/danube.h deleted file mode 100644 index cd2d247fe1..0000000000 --- a/package/uboot-ifxmips/files/include/configs/danube.h +++ /dev/null @@ -1,273 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * This file contains the configuration parameters for the danube board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define USE_REFERENCE_BOARD -//#define USE_EVALUATION_BOARD - -//#define DANUBE_BOOT_FROM_EBU -#define DANUBE_USE_DDR_RAM - -#ifdef DANUBE_USE_DDR_RAM -//#define DANUBE_DDR_RAM_111M -//#define DANUBE_DDR_RAM_166M -//#define PROMOSDDR400 -//#define DDR_SAMSUNG_166M -#define DDR_PSC_166M -//#define DANUBE_DDR_RAM_133M -#define DANUBE_DDR_RAM_SIZE 32 /* 32M DDR-DRAM for reference board */ -#endif - -#define CONFIG_LZMA 1 /* use LZMA for compression */ - -#define CLK_OUT2_25MHZ -#define CONFIG_MIPS32 1 /* MIPS 4Kc CPU core */ -#define CONFIG_IFX_MIPS 1 /* in an Infineon chip */ -#define CONFIG_DANUBE 1 /* on a danube Board */ -#define RAM_SIZE 0x2000000 /*32M ram*/ - -#define CPU_CLOCK_RATE 235000000 /* 235 MHz clock for the MIPS core */ - -#define INFINEON_EBU_BOOTCFG 0x688C688C /* CMULT = 8 for 150 MHz */ - -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ - -#define CONFIG_BAUDRATE 115200 - -#define DEBUG_PARSER 2 - -/* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 300, 9600, 19200, 38400, 57600, 115200 } - -#ifndef CFG_BOOTSTRAP_CODE -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#endif - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS -/* by MarsLin 2005/05/10, to support different hardware configuations */ -//#define CONFIG_EXTRA_ENV_SETTINGS <configs/ifx_extra_env.h> -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ethaddr=11:22:33:44:55:66\0" \ - "serverip=192.168.45.100\0" \ - "ipaddr=192.168.45.108\0" \ - "ram_addr=0x80500000\0" \ - "kernel_addr=0xb0030000\0" \ - "flashargs=setenv bootargs rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} init=/etc/preinit\0" \ - "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off\0" \ - "addmisc=setenv bootargs ${bootargs} console=ttyS1,115200 ethaddr=${ethaddr} ${mtdparts}\0" \ - "flash_flash=run flashargs addip addmisc;bootm ${kernel_addr}\0" \ - "flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}\0" \ - "net_flash=run load_kernel flashargs addip addmisc;bootm ${ram_addr}\0" \ - "net_nfs=run load_kernel nfsargs addip addmisc;bootm ${ram_addr}\0" \ - "load_kernel=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-uImage\0" \ - "update_uboot=tftp 0x80500000 u-boot.ifx;era 1:0-10; cp.b 0x80500000 0xb0000000 0x10000\0" \ - "update_openwrt=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-squashfs.image; era ${kernel_addr} +${filesize} 0; cp.b ${ram_addr} ${kernel_addr} ${filesize}\0" - -#define CONFIG_BOOTCOMMAND "run flash_flash" - -#define CONFIG_COMMANDS_YES (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_NET ) - -#define CONFIG_COMMANDS_NO (CFG_CMD_NFS | \ - CFG_CMD_FPGA | \ - CFG_CMD_IMLS | \ - CFG_CMD_ITEST | \ - CFG_CMD_XING | \ - CFG_CMD_IMI | \ - CFG_CMD_BMP | \ - CFG_CMD_BOOTD | \ - CFG_CMD_CONSOLE | \ - CFG_CMD_LOADS | \ - CFG_CMD_LOADB ) - -#define CONFIG_COMMANDS (CONFIG_COMMANDS_YES & ~CONFIG_COMMANDS_NO) - -#if 0 - CFG_CMD_DHCP - CFG_CMD_ELF - CFG_CMD_NAND -#endif - -#include <cmd_confdefs.h> - -/* - * Miscellaneous configurable options - */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "DANUBE # " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args*/ - -#define CFG_MALLOC_LEN 128*1024 - -#define CFG_BOOTPARAMS_LEN 128*1024 - -#define CFG_HZ (CPU_CLOCK_RATE / 2) - -#define CFG_LOAD_ADDR 0x80100000 /* default load address */ - -#define CFG_MEMTEST_START 0x80100000 -#define CFG_MEMTEST_END 0x80400000 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT (135) /* max number of sectors on one chip */ - -#define PHYS_FLASH_1 0xB0000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0xB4000000 /* Flash Bank #2 */ - -#define BOOTSTRAP_TEXT_BASE 0xb0000000 - -/* The following #defines are needed to get flash environment right */ -#define CFG_MONITOR_BASE UBOOT_RAM_TEXT_BASE /* board/danube/config.mk. = 0xA0800000 */ -#define BOOTSTRAP_CFG_MONITOR_BASE BOOTSTRAP_TEXT_BASE /* board/danube/config.mk. = 0xA0800000 */ -#define CFG_MONITOR_LEN (256 << 10) - -#define CFG_INIT_SP_OFFSET 0x400000 - -#define CFG_FLASH_BASE PHYS_FLASH_1 - -/* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (20 * CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (20 * CFG_HZ) /* Timeout for Flash Write */ - -#define CFG_ENV_IS_IN_FLASH 1 -//#define CFG_ENV_IS_NOWHERE 1 -//#define CFG_ENV_IS_IN_NVRAM 1 -/* Address and size of Primary Environment Sector */ -#define CFG_ENV_ADDR 0xB0020000 -#define CFG_ENV_SIZE 0x10000 - -#define CONFIG_FLASH_16BIT - -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_DANUBE_SWITCH -#define CONFIG_NET_MULTI -#define CONFIG_ENV_OVERWRITE - -#define EXCEPTION_BASE 0x200 - -/** - *\brief definition for nand - * - */ -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define NAND_ChipID_UNKNOWN 0x00 -#define SECTORSIZE 512 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - - -#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ -#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ - -#define NAND_DISABLE_CE(nand) -#define NAND_ENABLE_CE(nand) -#define NAND_WAIT_READY(nand) -#define WRITE_NAND_COMMAND(d, adr) -#define WRITE_NAND_ADDRESS(d, adr) -#define WRITE_NAND(d, adr) -#define READ_NAND(adr) -/* the following are NOP's in our implementation */ -#define NAND_CTL_CLRALE(nandptr) -#define NAND_CTL_SETALE(nandptr) -#define NAND_CTL_CLRCLE(nandptr) -#define NAND_CTL_SETCLE(nandptr) - - - -#define NAND_BASE_ADDRESS 0xB4000000 - -#define NAND_WRITE(addr, val) *((u8*)(NAND_BASE_ADDRESS | (addr))) = val;while((*EBU_NAND_WAIT & 0x08) == 0); -#define NAND_READ(addr, val) val = *((u8*)(NAND_BASE_ADDRESS | (addr))) -#define NAND_CE_SET -#define NAND_CE_CLEAR -#define NAND_READY ( ((*EBU_NAND_WAIT)&0x07) == 7) -#define NAND_READY_CLEAR *EBU_NAND_WAIT = 0; -#define WRITE_CMD 0x18 -#define WRITE_ADDR 0x14 -#define WRITE_LADDR 0x10 -#define WRITE_DATA 0x10 -#define READ_DATA 0x10 -#define READ_LDATA 0x00 -#define ACCESS_WAIT -#define IFX_ATC_NAND 0xc176 -#define IFX_BTC_NAND 0xc166 -#define ST_512WB2_NAND 0x2076 - -#define NAND_OK 0x00000000 /* Bootstrap succesful, start address in BOOT_RVEC */ -#define NAND_ERR 0x80000000 -#define NAND_ACC_TIMEOUT (NAND_ERR | 0x00000001) -#define NAND_ACC_ERR (NAND_ERR | 0x00000002) - - -/***************************************************************************** - * DANUBE - *****************************************************************************/ -/* lock cache for C program stack */ -/* points to ROM */ -/* stack size is 16K */ -#define LOCK_DCACHE_ADDR 0x9FC00000 -#define LOCK_DCACHE_SIZE 0x1000 - -/* - * Memory layout - */ -#define CFG_SDRAM_BASE 0x80000000 -#define CFG_SDRAM_BASE_UNCACHE 0xA0000000 -#define CFG_CACHE_LOCK_SIZE LOCK_DCACHE_SIZE - -/* - * Cache settings - */ -#define CFG_CACHE_SIZE 16384 -#define CFG_CACHE_LINES 32 -#define CFG_CACHE_WAYS 4 -#define CFG_CACHE_SETS 128 - -#define CFG_ICACHE_SIZE CFG_CACHE_SIZE -#define CFG_DCACHE_SIZE CFG_CACHE_SIZE -#define CFG_CACHELINE_SIZE CFG_CACHE_LINES - -#endif /* __CONFIG_H */ |