aboutsummaryrefslogtreecommitdiffstats
path: root/package/system/w1-gpio-custom/src
diff options
context:
space:
mode:
Diffstat (limited to 'package/system/w1-gpio-custom/src')
-rw-r--r--package/system/w1-gpio-custom/src/Kconfig4
-rw-r--r--package/system/w1-gpio-custom/src/Makefile1
-rw-r--r--package/system/w1-gpio-custom/src/w1-gpio-custom.c185
3 files changed, 0 insertions, 190 deletions
diff --git a/package/system/w1-gpio-custom/src/Kconfig b/package/system/w1-gpio-custom/src/Kconfig
deleted file mode 100644
index 74b9226c5c..0000000000
--- a/package/system/w1-gpio-custom/src/Kconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-config W1_MASTER_GPIO_CUSTOM
- tristate "Custom GPIO-based W1 driver"
- depends on GENERIC_GPIO
- select W1_GPIO \ No newline at end of file
diff --git a/package/system/w1-gpio-custom/src/Makefile b/package/system/w1-gpio-custom/src/Makefile
deleted file mode 100644
index 6a527432c1..0000000000
--- a/package/system/w1-gpio-custom/src/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-${CONFIG_W1_MASTER_GPIO_CUSTOM} += w1-gpio-custom.o \ No newline at end of file
diff --git a/package/system/w1-gpio-custom/src/w1-gpio-custom.c b/package/system/w1-gpio-custom/src/w1-gpio-custom.c
deleted file mode 100644
index 96cfcabc61..0000000000
--- a/package/system/w1-gpio-custom/src/w1-gpio-custom.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * Custom GPIO-based W1 driver
- *
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- * Copyright (C) 2008 Bifferos <bifferos at yahoo.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * ---------------------------------------------------------------------------
- *
- * The behaviour of this driver can be altered by setting some parameters
- * from the insmod command line.
- *
- * The following parameters are adjustable:
- *
- * bus0 These four arguments must be arrays of
- * bus1 3 unsigned integers as follows:
- * bus2
- * bus3 <id>,<pin>,<od>
- *
- * where:
- *
- * <id> ID to used as device_id for the corresponding bus (required)
- * <sda> GPIO pin ID of data pin (required)
- * <od> Pin is configured as open drain.
- *
- * See include/w1-gpio.h for more information about the parameters.
- *
- * If this driver is built into the kernel, you can use the following kernel
- * command line parameters, with the same values as the corresponding module
- * parameters listed above:
- *
- * w1-gpio-custom.bus0
- * w1-gpio-custom.bus1
- * w1-gpio-custom.bus2
- * w1-gpio-custom.bus3
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <linux/w1-gpio.h>
-
-#define DRV_NAME "w1-gpio-custom"
-#define DRV_DESC "Custom GPIO-based W1 driver"
-#define DRV_VERSION "0.1.1"
-
-#define PFX DRV_NAME ": "
-
-#define BUS_PARAM_ID 0
-#define BUS_PARAM_PIN 1
-#define BUS_PARAM_OD 2
-
-#define BUS_PARAM_REQUIRED 3
-#define BUS_PARAM_COUNT 3
-#define BUS_COUNT_MAX 4
-
-static unsigned int bus0[BUS_PARAM_COUNT] __initdata;
-static unsigned int bus1[BUS_PARAM_COUNT] __initdata;
-static unsigned int bus2[BUS_PARAM_COUNT] __initdata;
-static unsigned int bus3[BUS_PARAM_COUNT] __initdata;
-
-static unsigned int bus_nump[BUS_COUNT_MAX] __initdata;
-
-#define BUS_PARM_DESC " config -> id,pin,od"
-
-module_param_array(bus0, uint, &bus_nump[0], 0);
-MODULE_PARM_DESC(bus0, "bus0" BUS_PARM_DESC);
-module_param_array(bus1, uint, &bus_nump[1], 0);
-MODULE_PARM_DESC(bus1, "bus1" BUS_PARM_DESC);
-module_param_array(bus2, uint, &bus_nump[2], 0);
-MODULE_PARM_DESC(bus2, "bus2" BUS_PARM_DESC);
-module_param_array(bus3, uint, &bus_nump[3], 0);
-MODULE_PARM_DESC(bus3, "bus3" BUS_PARM_DESC);
-
-static struct platform_device *devices[BUS_COUNT_MAX];
-static unsigned int nr_devices;
-
-static void w1_gpio_custom_cleanup(void)
-{
- int i;
-
- for (i = 0; i < nr_devices; i++)
- if (devices[i])
- platform_device_put(devices[i]);
-}
-
-static int __init w1_gpio_custom_add_one(unsigned int id, unsigned int *params)
-{
- struct platform_device *pdev;
- struct w1_gpio_platform_data pdata;
- int err;
-
- if (!bus_nump[id])
- return 0;
-
- if (bus_nump[id] < BUS_PARAM_REQUIRED) {
- printk(KERN_ERR PFX "not enough parameters for bus%d\n", id);
- err = -EINVAL;
- goto err;
- }
-
- pdev = platform_device_alloc("w1-gpio", params[BUS_PARAM_ID]);
- if (!pdev) {
- err = -ENOMEM;
- goto err;
- }
-
- pdata.pin = params[BUS_PARAM_PIN];
- pdata.is_open_drain = params[BUS_PARAM_OD] ? 1:0;
- pdata.enable_external_pullup = NULL;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto err_put;
-
- err = platform_device_add(pdev);
- if (err)
- goto err_put;
-
- devices[nr_devices++] = pdev;
- return 0;
-
- err_put:
- platform_device_put(pdev);
- err:
- return err;
-}
-
-static int __init w1_gpio_custom_probe(void)
-{
- int err;
-
- nr_devices = 0;
- printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
-
- err = w1_gpio_custom_add_one(0, bus0);
- if (err) goto err;
-
- err = w1_gpio_custom_add_one(1, bus1);
- if (err) goto err;
-
- err = w1_gpio_custom_add_one(2, bus2);
- if (err) goto err;
-
- err = w1_gpio_custom_add_one(3, bus3);
- if (err) goto err;
-
- if (!nr_devices) {
- printk(KERN_ERR PFX "no bus parameter(s) specified\n");
- err = -ENODEV;
- goto err;
- }
-
- return 0;
-
-err:
- w1_gpio_custom_cleanup();
- return err;
-}
-
-#ifdef MODULE
-static int __init w1_gpio_custom_init(void)
-{
- return w1_gpio_custom_probe();
-}
-module_init(w1_gpio_custom_init);
-
-static void __exit w1_gpio_custom_exit(void)
-{
- w1_gpio_custom_cleanup();
-}
-module_exit(w1_gpio_custom_exit);
-#else
-subsys_initcall(w1_gpio_custom_probe);
-#endif /* MODULE*/
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Bifferos <bifferos at yahoo.co.uk >");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);