aboutsummaryrefslogtreecommitdiffstats
path: root/package/system/ep80579-drivers/patches/150-ocracoke_island.patch
diff options
context:
space:
mode:
Diffstat (limited to 'package/system/ep80579-drivers/patches/150-ocracoke_island.patch')
-rw-r--r--package/system/ep80579-drivers/patches/150-ocracoke_island.patch747
1 files changed, 0 insertions, 747 deletions
diff --git a/package/system/ep80579-drivers/patches/150-ocracoke_island.patch b/package/system/ep80579-drivers/patches/150-ocracoke_island.patch
deleted file mode 100644
index ae74e0c905..0000000000
--- a/package/system/ep80579-drivers/patches/150-ocracoke_island.patch
+++ /dev/null
@@ -1,747 +0,0 @@
---- a/Embedded/src/GbE/iegbe_oem_phy.c
-+++ b/Embedded/src/GbE/iegbe_oem_phy.c
-@@ -65,6 +65,10 @@ static int32_t iegbe_oem_link_m88_setup(
- static int32_t iegbe_oem_set_phy_mode(struct iegbe_hw *hw);
- static int32_t iegbe_oem_detect_phy(struct iegbe_hw *hw);
-
-+static int32_t iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw);
-+static int32_t bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data);
-+static int32_t oi_phy_setup (struct iegbe_hw *hw);
-+
- /**
- * iegbe_oem_setup_link
- * @hw: iegbe_hw struct containing device specific information
-@@ -114,6 +118,10 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
- }
-
- switch (hw->phy_id) {
-+ case BCM5395S_PHY_ID:
-+ return E1000_SUCCESS;
-+ break;
-+
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
- ret_val = iegbe_oem_link_m88_setup(hw);
-@@ -121,6 +129,12 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
- return ret_val;
- }
- break;
-+ case BCM5481_PHY_ID:
-+ ret_val = iegbe_oem_link_bcm5481_setup(hw);
-+ if(ret_val) {
-+ return ret_val;
-+ }
-+ break;
- default:
- DEBUGOUT("Invalid PHY ID\n");
- return -E1000_ERR_PHY_TYPE;
-@@ -179,6 +193,51 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
- #endif /* ifdef EXTERNAL_MDIO */
- }
-
-+/**
-+ * iegbe_oem_link_bcm5481_setup
-+ * @hw: iegbe_hw struct containing device specific information
-+ *
-+ * Returns E1000_SUCCESS, negative E1000 error code on failure
-+ *
-+ * copied verbatim from iegbe_oem_link_m88_setup
-+ **/
-+static int32_t
-+iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw)
-+{
-+ int32_t ret_val;
-+ uint16_t phy_data;
-+
-+ //DEBUGFUNC(__func__);
-+
-+ if(!hw)
-+ return -1;
-+
-+ /* phy_reset_disable is set in iegbe_oem_set_phy_mode */
-+ if(hw->phy_reset_disable)
-+ return E1000_SUCCESS;
-+
-+ // Enable MDIX in extended control reg.
-+ ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ECTRL, &phy_data);
-+ if(ret_val)
-+ {
-+ DEBUGOUT("Unable to read BCM5481_ECTRL register\n");
-+ return ret_val;
-+ }
-+
-+ phy_data &= ~BCM5481_ECTRL_DISMDIX;
-+ ret_val = iegbe_oem_write_phy_reg_ex(hw, BCM5481_ECTRL, phy_data);
-+ if(ret_val)
-+ {
-+ DEBUGOUT("Unable to write BCM5481_ECTRL register\n");
-+ return ret_val;
-+ }
-+
-+ ret_val = oi_phy_setup (hw);
-+ if (ret_val)
-+ return ret_val;
-+
-+ return E1000_SUCCESS;
-+}
-
- /**
- * iegbe_oem_link_m88_setup
-@@ -340,6 +399,11 @@ iegbe_oem_force_mdi(struct iegbe_hw *hw,
- * see iegbe_phy_force_speed_duplex, which does the following for M88
- */
- switch (hw->phy_id) {
-+ case BCM5395S_PHY_ID:
-+ case BCM5481_PHY_ID:
-+ DEBUGOUT("WARNING: An empty iegbe_oem_force_mdi() has been called!\n");
-+ break;
-+
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
- ret_val = iegbe_oem_read_phy_reg_ex(hw,
-@@ -415,6 +479,8 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw
- switch (hw->phy_id) {
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-+ case BCM5481_PHY_ID:
-+ case BCM5395S_PHY_ID:
- DEBUGOUT("No DSP to reset on OEM PHY\n");
- break;
- default:
-@@ -460,6 +526,11 @@ iegbe_oem_cleanup_after_phy_reset(struct
- * see iegbe_phy_force_speed_duplex, which does the following for M88
- */
- switch (hw->phy_id) {
-+ case BCM5395S_PHY_ID:
-+ case BCM5481_PHY_ID:
-+ DEBUGOUT("WARNING: An empty iegbe_oem_cleanup_after_phy_reset() has been called!\n");
-+ break;
-+
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
- /*
-@@ -573,6 +644,11 @@ iegbe_oem_set_phy_mode(struct iegbe_hw *
- * use iegbe_set_phy_mode as example
- */
- switch (hw->phy_id) {
-+ case BCM5395S_PHY_ID:
-+ case BCM5481_PHY_ID:
-+ DEBUGOUT("WARNING: An empty iegbe_oem_set_phy_mode() has been called!\n");
-+ break;
-+
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
- ret_val = iegbe_read_eeprom(hw,
-@@ -641,6 +717,19 @@ iegbe_oem_detect_phy(struct iegbe_hw *hw
- }
- hw->phy_type = iegbe_phy_oem;
-
-+{
-+ // If MAC2 (BCM5395 switch), manually detect the phy
-+ struct iegbe_adapter *adapter;
-+ uint32_t device_number;
-+ adapter = (struct iegbe_adapter *) hw->back;
-+ device_number = PCI_SLOT(adapter->pdev->devfn);
-+ if (device_number == ICP_XXXX_MAC_2) {
-+ hw->phy_id = BCM5395S_PHY_ID;
-+ hw->phy_revision = 0;
-+ return E1000_SUCCESS;
-+ }
-+}
-+
- ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_ID1, &phy_id_high);
- if(ret_val) {
- DEBUGOUT("Unable to read PHY register PHY_ID1\n");
-@@ -690,6 +779,8 @@ iegbe_oem_get_tipg(struct iegbe_hw *hw)
- switch (hw->phy_id) {
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-+ case BCM5481_PHY_ID:
-+ case BCM5395S_PHY_ID:
- phy_num = DEFAULT_ICP_XXXX_TIPG_IPGT;
- break;
- default:
-@@ -738,6 +829,8 @@ iegbe_oem_phy_is_copper(struct iegbe_hw
- switch (hw->phy_id) {
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-+ case BCM5481_PHY_ID:
-+ case BCM5395S_PHY_ID:
- isCopper = TRUE;
- break;
- default:
-@@ -796,13 +889,13 @@ iegbe_oem_get_phy_dev_number(struct iegb
- switch(device_number)
- {
- case ICP_XXXX_MAC_0:
-- hw->phy_addr = 0x00;
-+ hw->phy_addr = 0x01;
- break;
- case ICP_XXXX_MAC_1:
-- hw->phy_addr = 0x01;
-+ hw->phy_addr = 0x02;
- break;
- case ICP_XXXX_MAC_2:
-- hw->phy_addr = 0x02;
-+ hw->phy_addr = 0x00;
- break;
- default: hw->phy_addr = 0x00;
- }
-@@ -851,6 +944,12 @@ iegbe_oem_mii_ioctl(struct iegbe_adapter
- if(!adapter || !ifr) {
- return -1;
- }
-+
-+ // If MAC2 (BCM5395 switch) then leave now
-+ if ((PCI_SLOT(adapter->pdev->devfn)) == ICP_XXXX_MAC_2) {
-+ return -1;
-+ }
-+
- switch (data->reg_num) {
- case PHY_CTRL:
- if(mii_reg & MII_CR_POWER_DOWN) {
-@@ -987,6 +1086,11 @@ void iegbe_oem_get_phy_regs(struct iegbe
- * [10] = mdix mode
- */
- switch (adapter->hw.phy_id) {
-+ case BCM5395S_PHY_ID:
-+ case BCM5481_PHY_ID:
-+ DEBUGOUT("WARNING: An empty iegbe_oem_get_phy_regs() has been called!\n");
-+ break;
-+
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
- if(corrected_len > 0) {
-@@ -1068,8 +1172,13 @@ iegbe_oem_phy_loopback(struct iegbe_adap
- * Loopback configuration is the same for each of the supported PHYs.
- */
- switch (adapter->hw.phy_id) {
-+ case BCM5395S_PHY_ID:
-+ DEBUGOUT("WARNING: An empty iegbe_oem_phy_loopback() has been called!\n");
-+ break;
-+
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-+ case BCM5481_PHY_ID:
-
- adapter->hw.autoneg = FALSE;
-
-@@ -1182,8 +1291,14 @@ iegbe_oem_loopback_cleanup(struct iegbe_
- }
-
- switch (adapter->hw.phy_id) {
-+ case BCM5395S_PHY_ID:
-+ DEBUGOUT("WARNING: An empty iegbe_oem_loopback_cleanup() has been called!\n");
-+ return;
-+ break;
-+
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-+ case BCM5481_PHY_ID:
- default:
- adapter->hw.autoneg = TRUE;
-
-@@ -1243,6 +1358,11 @@ iegbe_oem_phy_speed_downgraded(struct ie
- */
-
- switch (hw->phy_id) {
-+ case BCM5395S_PHY_ID:
-+ case BCM5481_PHY_ID:
-+ *isDowngraded = 0;
-+ break;
-+
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
- ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
-@@ -1305,6 +1425,11 @@ iegbe_oem_check_polarity(struct iegbe_hw
- */
-
- switch (hw->phy_id) {
-+ case BCM5395S_PHY_ID:
-+ case BCM5481_PHY_ID:
-+ *polarity = 0;
-+ break;
-+
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
- /* return the Polarity bit in the Status register. */
-@@ -1367,6 +1492,25 @@ iegbe_oem_phy_is_full_duplex(struct iegb
- */
-
- switch (hw->phy_id) {
-+ case BCM5395S_PHY_ID:
-+ /* Always full duplex */
-+ *isFD = 1;
-+ break;
-+
-+ case BCM5481_PHY_ID:
-+ ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
-+ if(ret_val) return ret_val;
-+
-+ switch (BCM5481_ASTAT_HCD(phy_data)) {
-+ case BCM5481_ASTAT_1KBTFD:
-+ case BCM5481_ASTAT_100BTXFD:
-+ *isFD = 1;
-+ break;
-+ default:
-+ *isFD = 0;
-+ }
-+ break;
-+
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
- ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
-@@ -1423,6 +1567,25 @@ iegbe_oem_phy_is_speed_1000(struct iegbe
- */
-
- switch (hw->phy_id) {
-+ case BCM5395S_PHY_ID:
-+ /* Always 1000mb */
-+ *is1000 = 1;
-+ break;
-+
-+ case BCM5481_PHY_ID:
-+ ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
-+ if(ret_val) return ret_val;
-+
-+ switch (BCM5481_ASTAT_HCD(phy_data)) {
-+ case BCM5481_ASTAT_1KBTFD:
-+ case BCM5481_ASTAT_1KBTHD:
-+ *is1000 = 1;
-+ break;
-+ default:
-+ *is1000 = 0;
-+ }
-+ break;
-+
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
- ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
-@@ -1478,6 +1641,25 @@ iegbe_oem_phy_is_speed_100(struct iegbe_
- * see iegbe_config_mac_to_phy
- */
- switch (hw->phy_id) {
-+ case BCM5395S_PHY_ID:
-+ /* Always 1000Mb, never 100mb */
-+ *is100 = 0;
-+ break;
-+
-+ case BCM5481_PHY_ID:
-+ ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
-+ if(ret_val) return ret_val;
-+
-+ switch (BCM5481_ASTAT_HCD(phy_data)) {
-+ case BCM5481_ASTAT_100BTXFD:
-+ case BCM5481_ASTAT_100BTXHD:
-+ *is100 = 1;
-+ break;
-+ default:
-+ *is100 = 0;
-+ }
-+ break;
-+
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
- ret_val = iegbe_oem_read_phy_reg_ex(hw,
-@@ -1535,6 +1717,11 @@ iegbe_oem_phy_get_info(struct iegbe_hw *
- * see iegbe_phy_m88_get_info
- */
- switch (hw->phy_id) {
-+ case BCM5395S_PHY_ID:
-+ case BCM5481_PHY_ID:
-+ DEBUGOUT("WARNING: An empty iegbe_oem_phy_get_info() has been called!\n");
-+ break;
-+
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
- /* The downshift status is checked only once, after link is
-@@ -1636,8 +1823,13 @@ iegbe_oem_phy_hw_reset(struct iegbe_hw *
- * the M88 used in truxton.
- */
- switch (hw->phy_id) {
-+ case BCM5395S_PHY_ID:
-+ DEBUGOUT("WARNING: An empty iegbe_oem_phy_hw_reset() has been called!\n");
-+ break;
-+
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-+ case BCM5481_PHY_ID:
- ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_CTRL, &phy_data);
- if(ret_val) {
- DEBUGOUT("Unable to read register PHY_CTRL\n");
-@@ -1699,6 +1891,8 @@ iegbe_oem_phy_init_script(struct iegbe_h
- switch (hw->phy_id) {
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-+ case BCM5481_PHY_ID:
-+ case BCM5395S_PHY_ID:
- DEBUGOUT("Nothing to do for OEM PHY Init");
- break;
- default:
-@@ -1735,6 +1929,11 @@ iegbe_oem_read_phy_reg_ex(struct iegbe_h
- return -1;
- }
-
-+ if (hw->phy_id == BCM5395S_PHY_ID) {
-+ DEBUGOUT("WARNING: iegbe_oem_read_phy_reg_ex() has been unexpectedly called!\n");
-+ return -1;
-+ }
-+
- /* call the GCU func that will read the phy
- *
- * Make note that the M88 phy is what'll be used on Truxton.
-@@ -1782,6 +1981,11 @@ iegbe_oem_set_trans_gasket(struct iegbe_
- }
-
- switch (hw->phy_id) {
-+ case BCM5395S_PHY_ID:
-+ case BCM5481_PHY_ID:
-+ DEBUGOUT("WARNING: An empty iegbe_oem_set_trans_gasket() has been called!\n");
-+ break;
-+
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
- /* Gasket set correctly for Marvell Phys, so nothing to do */
-@@ -1886,6 +2090,8 @@ iegbe_oem_phy_needs_reset_with_mac(struc
- switch (hw->phy_id) {
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-+ case BCM5481_PHY_ID:
-+ case BCM5395S_PHY_ID:
- ret_val = FALSE;
- break;
- default:
-@@ -1935,6 +2141,8 @@ iegbe_oem_config_dsp_after_link_change(s
- switch (hw->phy_id) {
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
-+ case BCM5481_PHY_ID:
-+ case BCM5395S_PHY_ID:
- DEBUGOUT("No DSP to configure on OEM PHY");
- break;
- default:
-@@ -1978,6 +2186,12 @@ iegbe_oem_get_cable_length(struct iegbe_
- }
-
- switch (hw->phy_id) {
-+ case BCM5395S_PHY_ID:
-+ case BCM5481_PHY_ID:
-+ *min_length = 0;
-+ *max_length = iegbe_igp_cable_length_150;
-+ break;
-+
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
- ret_val = iegbe_oem_read_phy_reg_ex(hw,
-@@ -2061,6 +2275,23 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
- */
-
- switch (hw->phy_id) {
-+ case BCM5395S_PHY_ID:
-+ /* Link always up */
-+ *isUp = TRUE;
-+ return E1000_SUCCESS;
-+ break;
-+
-+ case BCM5481_PHY_ID:
-+ iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
-+ ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
-+ if(ret_val)
-+ {
-+ DEBUGOUT("Unable to read PHY register BCM5481_ESTAT\n");
-+ return ret_val;
-+ }
-+ statusMask = BCM5481_ESTAT_LINK;
-+ break;
-+
- case M88E1000_I_PHY_ID:
- case M88E1141_E_PHY_ID:
- iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
-@@ -2092,3 +2323,210 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
- #endif /* ifdef EXTERNAL_MDIO */
- }
-
-+
-+
-+//-----
-+// Read BCM5481 expansion register
-+//
-+int32_t
-+bcm5481_read_ex (struct iegbe_hw *hw, uint16_t reg, uint16_t *data)
-+{
-+ int ret;
-+ uint16_t selector;
-+ uint16_t reg_data;
-+
-+ // Get the current value of bits 15:12
-+ ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &selector);
-+ if (ret)
-+ return ret;
-+
-+ // Select the expansion register
-+ selector &= 0xf000;
-+ selector |= (0xf << 8) | (reg);
-+ iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
-+
-+ // Read the expansion register
-+ ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &reg_data);
-+
-+ // De-select the expansion registers.
-+ selector &= 0xf000;
-+ iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
-+
-+ if (ret)
-+ return ret;
-+
-+ *data = reg_data;
-+ return ret;
-+}
-+
-+//-----
-+// Read reg 0x18 sub-register
-+//
-+static int32_t
-+bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data)
-+{
-+ int ret;
-+ uint16_t tmp_data;
-+
-+ // Select reg 0x18, sv
-+ tmp_data = ((sv & BCM5481_R18H_SV_MASK) << 12) | BCM5481_R18H_SV_MCTRL;
-+ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, tmp_data);
-+ if(ret)
-+ return ret;
-+
-+ // Read reg 0x18, sv
-+ ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R18H, &tmp_data);
-+ if(ret)
-+ return ret;
-+
-+ *data = tmp_data;
-+ return ret;
-+}
-+
-+//-----
-+// Read reg 0x1C sub-register
-+//
-+int32_t
-+bcm5481_read_1csv (struct iegbe_hw *hw, int sv, uint16_t *data)
-+{
-+ int ret;
-+ uint16_t tmp_data;
-+
-+ // Select reg 0x1c, sv
-+ tmp_data = ((sv & BCM5481_R1CH_SV_MASK) << BCM5481_R1CH_SV_SHIFT);
-+
-+ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, tmp_data);
-+ if(ret)
-+ return ret;
-+
-+ // Read reg 0x1c, sv
-+ ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R1CH, &tmp_data);
-+ if(ret)
-+ return ret;
-+
-+ *data = tmp_data;
-+ return ret;
-+}
-+
-+//-----
-+// Read-modify-write a 0x1C register.
-+//
-+// hw - hardware access info.
-+// reg - 0x1C register to modify.
-+// data - bits which should be set.
-+// mask - the '1' bits in this argument will be cleared in the data
-+// read from 'reg' then 'data' will be or'd in and the result
-+// will be written to 'reg'.
-+
-+int32_t
-+bcm5481_rmw_1csv (struct iegbe_hw *hw, uint16_t reg, uint16_t data, uint16_t mask)
-+{
-+ int32_t ret;
-+ uint16_t reg_data;
-+
-+ ret = 0;
-+
-+ ret = bcm5481_read_1csv (hw, reg, &reg_data);
-+ if (ret)
-+ {
-+ DEBUGOUT("Unable to read BCM5481 1CH register\n");
-+ printk (KERN_ERR "Unable to read BCM5481 1CH register [0x%x]\n", reg);
-+ return ret;
-+ }
-+
-+ reg_data &= ~mask;
-+ reg_data |= (BCM5481_R1CH_WE | data);
-+
-+ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, reg_data);
-+ if(ret)
-+ {
-+ DEBUGOUT("Unable to write BCM5481 1CH register\n");
-+ printk (KERN_ERR "Unable to write BCM5481 1CH register\n");
-+ return ret;
-+ }
-+
-+ return ret;
-+}
-+
-+int32_t
-+oi_phy_setup (struct iegbe_hw *hw)
-+{
-+ int ret;
-+ uint16_t pmii_data;
-+ uint16_t mctrl_data;
-+ uint16_t cacr_data;
-+
-+ ret = 0;
-+
-+ // Set low power mode via reg 0x18, sv010, bit 6
-+ // Do a read-modify-write on reg 0x18, sv010 register to preserve existing bits.
-+ ret = bcm5481_read_18sv (hw, BCM5481_R18H_SV_PMII, &pmii_data);
-+ if (ret)
-+ {
-+ DEBUGOUT("Unable to read BCM5481_R18H_SV_PMII register\n");
-+ printk (KERN_ERR "Unable to read BCM5481_R18H_SV_PMII register\n");
-+ return ret;
-+ }
-+
-+ // Set the LPM bit in the data just read and write back to sv010
-+ // The shadow register select bits [2:0] are set by reading the sv010
-+ // register.
-+ pmii_data |= BCM5481_R18H_SV010_LPM;
-+ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, pmii_data);
-+ if(ret)
-+ {
-+ DEBUGOUT("Unable to write BCM5481_R18H register\n");
-+ printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
-+ return ret;
-+ }
-+
-+
-+ // Set the RGMII RXD to RXC skew bit in reg 0x18, sv111
-+
-+ if (bcm5481_read_18sv (hw, BCM5481_R18H_SV_MCTRL, &mctrl_data))
-+ {
-+ DEBUGOUT("Unable to read BCM5481_R18H_SV_MCTRL register\n");
-+ printk (KERN_ERR "Unable to read BCM5481_R18H_SV_MCTRL register\n");
-+ return ret;
-+ }
-+ mctrl_data |= (BCM5481_R18H_WE | BCM5481_R18H_SV111_SKEW);
-+
-+ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, mctrl_data);
-+ if(ret)
-+ {
-+ DEBUGOUT("Unable to write BCM5481_R18H register\n");
-+ printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
-+ return ret;
-+ }
-+
-+ // Enable RGMII transmit clock delay in reg 0x1c, sv00011
-+ ret = bcm5481_read_1csv (hw, BCM5481_R1CH_CACR, &cacr_data);
-+ if (ret)
-+ {
-+ DEBUGOUT("Unable to read BCM5481_R1CH_CACR register\n");
-+ printk (KERN_ERR "Unable to read BCM5481_R1CH_CACR register\n");
-+ return ret;
-+ }
-+
-+ cacr_data |= (BCM5481_R1CH_WE | BCM5481_R1CH_CACR_TCD);
-+
-+ ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, cacr_data);
-+ if(ret)
-+ {
-+ DEBUGOUT("Unable to write BCM5481_R1CH register\n");
-+ printk (KERN_ERR "Unable to write BCM5481_R1CH register\n");
-+ return ret;
-+ }
-+
-+ // Enable dual link speed indication (0x1c, sv 00010, bit 2)
-+ ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_SC1, BCM5481_R1CH_SC1_LINK, BCM5481_R1CH_SC1_LINK);
-+ if (ret)
-+ return ret;
-+
-+ // Enable link and activity on ACTIVITY LED (0x1c, sv 01001, bit 4=1, bit 3=0)
-+ ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_LCTRL, BCM5481_R1CH_LCTRL_ALEN, BCM5481_R1CH_LCTRL_ALEN | BCM5481_R1CH_LCTRL_AEN);
-+ if (ret)
-+ return ret;
-+
-+ return ret;
-+}
---- a/Embedded/src/GbE/iegbe_oem_phy.h
-+++ b/Embedded/src/GbE/iegbe_oem_phy.h
-@@ -95,6 +95,8 @@ int32_t iegbe_oem_phy_is_link_up(struct
-
- #define DEFAULT_ICP_XXXX_TIPG_IPGT 8 /* Inter Packet Gap Transmit Time */
- #define ICP_XXXX_TIPG_IPGT_MASK 0x000003FFUL
-+#define BCM5481_PHY_ID 0x0143BCA0
-+#define BCM5395S_PHY_ID 0x0143BCF0
-
- /* Miscellaneous defines */
- #ifdef IEGBE_10_100_ONLY
-@@ -103,5 +105,65 @@ int32_t iegbe_oem_phy_is_link_up(struct
- #define ICP_XXXX_AUTONEG_ADV_DEFAULT 0x2F
- #endif
-
-+/* BCM5481 specifics */
-+
-+#define BCM5481_ECTRL (0x10)
-+#define BCM5481_ESTAT (0x11)
-+#define BCM5481_RXERR (0x12)
-+#define BCM5481_EXPRW (0x15)
-+#define BCM5481_EXPACC (0x17)
-+#define BCM5481_ASTAT (0x19)
-+#define BCM5481_R18H (0x18)
-+#define BCM5481_R1CH (0x1c)
-+
-+/* indirect register access via register 18h */
-+
-+#define BCM5481_R18H_SV_MASK (7) // Mask for SV bits.
-+#define BCM5481_R18H_SV_ACTRL (0) // SV000 Aux. control
-+#define BCM5481_R18H_SV_10BT (1) // SV001 10Base-T
-+#define BCM5481_R18H_SV_PMII (2) // SV010 Power/MII control
-+#define BCM5481_R18H_SV_MTEST (4) // SV100 Misc. test
-+#define BCM5481_R18H_SV_MCTRL (7) // SV111 Misc. control
-+
-+#define BCM5481_R18H_SV001_POL (1 << 13) // Polarity
-+#define BCM5481_R18H_SV010_LPM (1 << 6)
-+#define BCM5481_R18H_SV111_SKEW (1 << 8)
-+#define BCM5481_R18H_WE (1 << 15) // Write enable
-+
-+// 0x1c registers
-+#define BCM5481_R1CH_SV_SHIFT (10)
-+#define BCM5481_R1CH_SV_MASK (0x1f)
-+#define BCM5481_R1CH_SC1 (0x02) // sv00010 Spare control 1
-+#define BCM5481_R1CH_CACR (0x03) // sv00011 Clock alignment control
-+#define BCM5481_R1CH_LCTRL (0x09) // sv01001 LED control
-+#define BCM5481_R1CH_LEDS1 (0x0d) // sv01101 LED selector 1
-+
-+// 0x1c common
-+#define BCM5481_R1CH_WE (1 << 15) // Write enable
-+
-+// 0x1c, sv 00010
-+#define BCM5481_R1CH_SC1_LINK (1 << 2) // sv00010 Linkspeed
-+
-+// 0x1c, sv 00011
-+#define BCM5481_R1CH_CACR_TCD (1 << 9) // sv00011 RGMII tx clock delay
-+
-+// 0x1c, sv 01001
-+#define BCM5481_R1CH_LCTRL_ALEN (1 << 4) // Activity/Link enable on ACTIVITY LED
-+#define BCM5481_R1CH_LCTRL_AEN (1 << 3) // Activity enable on ACTIVITY LED
-+
-+#define BCM5481_ECTRL_DISMDIX (1 <<14)
-+
-+#define BCM5481_MCTRL_AUTOMDIX (1 <<9)
-+
-+#define BCM5481_ESTAT_LINK (1 << 8)
-+
-+#define BCM5481_ASTAT_ANC (1 << 15)
-+#define BCM5481_ASTAT_ANHCD (7 << 8)
-+#define BCM5481_ASTAT_HCD(x) ((x >> 8) & 7)
-+#define BCM5481_ASTAT_1KBTFD (0x7)
-+#define BCM5481_ASTAT_1KBTHD (0x6)
-+#define BCM5481_ASTAT_100BTXFD (0x5)
-+#define BCM5481_ASTAT_100BTXHD (0x3)
-+
- #endif /* ifndef _IEGBE_OEM_PHY_H_ */
-