aboutsummaryrefslogtreecommitdiffstats
path: root/package/robocfg/src
diff options
context:
space:
mode:
Diffstat (limited to 'package/robocfg/src')
-rw-r--r--package/robocfg/src/Makefile11
-rw-r--r--package/robocfg/src/etc53xx.h619
-rw-r--r--package/robocfg/src/robocfg.c581
3 files changed, 0 insertions, 1211 deletions
diff --git a/package/robocfg/src/Makefile b/package/robocfg/src/Makefile
deleted file mode 100644
index e11acb020a..0000000000
--- a/package/robocfg/src/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-
-all: robocfg
-
-%.o: %.c
- $(CC) $(CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $^
-
-robocfg: robocfg.o
- $(CC) -o $@ $^
-
-clean:
- rm -f *.o robocfg
diff --git a/package/robocfg/src/etc53xx.h b/package/robocfg/src/etc53xx.h
deleted file mode 100644
index d5b1310cb6..0000000000
--- a/package/robocfg/src/etc53xx.h
+++ /dev/null
@@ -1,619 +0,0 @@
-/*
- * Broadcom Home Gateway Reference Design
- * BCM53xx Register definitions
- *
- * Copyright 2004, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- */
-
-#ifndef __BCM535M_H_
-#define __BCM535M_H_
-
-/* ROBO embedded device type */
-#define ROBO_DEV_5380 1
-#define ROBO_DEV_5365 2
-#define ROBO_DEV_5350 3
-
-/* BCM5325m GLOBAL PAGE REGISTER MAP */
-#ifndef _CFE_
-#pragma pack(1)
-#endif
-
-/* BCM5325m Serial Management Port (SMP) Page offsets */
-#define ROBO_CTRL_PAGE 0x00 /* Control registers */
-#define ROBO_STAT_PAGE 0x01 /* Status register */
-#define ROBO_MGMT_PAGE 0x02 /* Management Mode registers */
-#define ROBO_MIB_AC_PAGE 0x03 /* MIB Autocast registers */
-#define ROBO_ARLCTRL_PAGE 0x04 /* ARL Control Registers */
-#define ROBO_ARLIO_PAGE 0x05 /* ARL Access Registers */
-#define ROBO_FRAMEBUF_PAGE 0x06 /* Management frame access registers */
-#define ROBO_MEM_ACCESS_PAGE 0x08 /* Memory access registers */
-
-/* PHY Registers */
-#define ROBO_PORT0_MII_PAGE 0x10 /* Port 0 MII Registers */
-#define ROBO_PORT1_MII_PAGE 0x11 /* Port 1 MII Registers */
-#define ROBO_PORT2_MII_PAGE 0x12 /* Port 2 MII Registers */
-#define ROBO_PORT3_MII_PAGE 0x13 /* Port 3 MII Registers */
-#define ROBO_PORT4_MII_PAGE 0x14 /* Port 4 MII Registers */
-/* (start) registers only for BCM5380 */
-#define ROBO_PORT5_MII_PAGE 0x15 /* Port 5 MII Registers */
-#define ROBO_PORT6_MII_PAGE 0x16 /* Port 6 MII Registers */
-#define ROBO_PORT7_MII_PAGE 0x17 /* Port 7 MII Registers */
-/* (end) registers only for BCM5380 */
-#define ROBO_IM_PORT_PAGE 0x18 /* Inverse MII Port (to EMAC) */
-#define ROBO_ALL_PORT_PAGE 0x19 /* All ports MII Registers (broadcast)*/
-
-/* MAC Statistics registers */
-#define ROBO_PORT0_MIB_PAGE 0x20 /* Port 0 10/100 MIB Statistics */
-#define ROBO_PORT1_MIB_PAGE 0x21 /* Port 1 10/100 MIB Statistics */
-#define ROBO_PORT2_MIB_PAGE 0x22 /* Port 2 10/100 MIB Statistics */
-#define ROBO_PORT3_MIB_PAGE 0x23 /* Port 3 10/100 MIB Statistics */
-#define ROBO_PORT4_MIB_PAGE 0x24 /* Port 4 10/100 MIB Statistics */
-/* (start) registers only for BCM5380 */
-#define ROBO_PORT5_MIB_PAGE 0x25 /* Port 5 10/100 MIB Statistics */
-#define ROBO_PORT6_MIB_PAGE 0x26 /* Port 6 10/100 MIB Statistics */
-#define ROBO_PORT7_MIB_PAGE 0x27 /* Port 7 10/100 MIB Statistics */
-/* (end) registers only for BCM5380 */
-#define ROBO_IM_PORT_MIB_PAGE 0x28 /* Inverse MII Port MIB Statistics */
-
-/* Quality of Service (QoS) Registers */
-#define ROBO_QOS_PAGE 0x30 /* QoS Registers */
-
-/* VLAN Registers */
-#define ROBO_VLAN_PAGE 0x34 /* VLAN Registers */
-
-/* Note SPI Data/IO Registers not used */
-#define ROBO_SPI_DATA_IO_0_PAGE 0xf0 /* SPI Data I/O 0 */
-#define ROBO_SPI_DATA_IO_1_PAGE 0xf1 /* SPI Data I/O 1 */
-#define ROBO_SPI_DATA_IO_2_PAGE 0xf2 /* SPI Data I/O 2 */
-#define ROBO_SPI_DATA_IO_3_PAGE 0xf3 /* SPI Data I/O 3 */
-#define ROBO_SPI_DATA_IO_4_PAGE 0xf4 /* SPI Data I/O 4 */
-#define ROBO_SPI_DATA_IO_5_PAGE 0xf5 /* SPI Data I/O 5 */
-#define ROBO_SPI_DATA_IO_6_PAGE 0xf6 /* SPI Data I/O 6 */
-#define ROBO_SPI_DATA_IO_7_PAGE 0xf7 /* SPI Data I/O 7 */
-
-#define ROBO_SPI_STATUS_PAGE 0xfe /* SPI Status Registers */
-#define ROBO_PAGE_PAGE 0xff /* Page Registers */
-
-
-/* BCM5325m CONTROL PAGE (0x00) REGISTER MAP : 8bit (byte) registers */
-typedef struct _ROBO_PORT_CTRL_STRUC
-{
- unsigned char rx_disable:1; /* rx disable */
- unsigned char tx_disable:1; /* tx disable */
- unsigned char rsvd:3; /* reserved */
- unsigned char stp_state:3; /* spanning tree state */
-} ROBO_PORT_CTRL_STRUC;
-
-#define ROBO_PORT0_CTRL 0x00 /* 10/100 Port 0 Control */
-#define ROBO_PORT1_CTRL 0x01 /* 10/100 Port 1 Control */
-#define ROBO_PORT2_CTRL 0x02 /* 10/100 Port 2 Control */
-#define ROBO_PORT3_CTRL 0x03 /* 10/100 Port 3 Control */
-#define ROBO_PORT4_CTRL 0x04 /* 10/100 Port 4 Control */
-/* (start) registers only for BCM5380 */
-#define ROBO_PORT5_CTRL 0x05 /* 10/100 Port 5 Control */
-#define ROBO_PORT6_CTRL 0x06 /* 10/100 Port 6 Control */
-#define ROBO_PORT7_CTRL 0x07 /* 10/100 Port 7 Control */
-/* (end) registers only for BCM5380 */
-#define ROBO_IM_PORT_CTRL 0x08 /* 10/100 Port 8 Control */
-#define ROBO_SMP_CTRL 0x0a /* SMP Control register */
-#define ROBO_SWITCH_MODE 0x0b /* Switch Mode Control */
-#define ROBO_PORT_OVERRIDE_CTRL 0x0e /* Port state override */
-#define ROBO_PORT_OVERRIDE_RVMII (1<<4) /* Bit 4 enables RvMII */
-#define ROBO_PD_MODE_CTRL 0x0f /* Power-down mode control */
-#define ROBO_IP_MULTICAST_CTRL 0x21 /* IP Multicast control */
-
-/* BCM5325m STATUS PAGE (0x01) REGISTER MAP : 16bit/48bit registers */
-#define ROBO_HALF_DUPLEX 0
-#define ROBO_FULL_DUPLEX 1
-
-#define ROBO_LINK_STAT_SUMMARY 0x00 /* Link Status Summary: 16bit */
-#define ROBO_LINK_STAT_CHANGE 0x02 /* Link Status Change: 16bit */
-#define ROBO_SPEED_STAT_SUMMARY 0x04 /* Port Speed Summary: 16bit*/
-#define ROBO_DUPLEX_STAT_SUMMARY 0x06 /* Duplex Status Summary: 16bit */
-#define ROBO_PAUSE_STAT_SUMMARY 0x08 /* PAUSE Status Summary: 16bit */
-#define ROBO_SOURCE_ADDR_CHANGE 0x0C /* Source Address Change: 16bit */
-#define ROBO_LSA_PORT0 0x10 /* Last Source Addr, Port 0: 48bits*/
-#define ROBO_LSA_PORT1 0x16 /* Last Source Addr, Port 1: 48bits*/
-#define ROBO_LSA_PORT2 0x1c /* Last Source Addr, Port 2: 48bits*/
-#define ROBO_LSA_PORT3 0x22 /* Last Source Addr, Port 3: 48bits*/
-#define ROBO_LSA_PORT4 0x28 /* Last Source Addr, Port 4: 48bits*/
-#define ROBO_LSA_IM_PORT 0x40 /* Last Source Addr, IM Port: 48bits*/
-
-/* BCM5325m MANAGEMENT MODE REGISTERS (0x02) REGISTER MAP: 8/48 bit regs*/
-typedef struct _ROBO_GLOBAL_CONFIG_STRUC
-{
- unsigned char resetMIB:1; /* reset MIB counters */
- unsigned char rxBPDU:1; /* receive BDPU enable */
- unsigned char rsvd1:2; /* reserved */
- unsigned char MIBacHdrCtrl:1; /* MIB autocast header control */
- unsigned char MIBac:1; /* MIB autocast enable */
- unsigned char frameMgmtPort:2; /* frame management port */
-} ROBO_GLOBAL_CONFIG_STRUC;
-#define ROBO_GLOBAL_CONFIG 0x00 /* Global Management Config: 8bit*/
-#define ROBO_MGMT_PORT_ID 0x02 /* Management Port ID: 8bit*/
-#define ROBO_RMON_MIB_STEER 0x04 /* RMON Mib Steering: 16bit */
-#define ROBO_MIB_MODE_SELECT 0x04 /* MIB Mode select: 16bit (BCM5350) */
-#define ROBO_AGE_TIMER_CTRL 0x06 /* Age time control: 32bit */
-#define ROBO_MIRROR_CAP_CTRL 0x10 /* Mirror Capture : 16bit */
-#define ROBO_MIRROR_ING_CTRL 0x12 /* Mirror Ingress Control: 16bit */
-#define ROBO_MIRROR_ING_DIV_CTRL 0x14 /* Mirror Ingress Divider: 16bit */
-#define ROBO_MIRROR_ING_MAC_ADDR 0x16 /* Ingress Mirror MAC Addr: 48bit*/
-#define ROBO_MIRROR_EGR_CTRL 0x1c /* Mirror Egress Control: 16bit */
-#define ROBO_MIRROR_EGR_DIV_CTRL 0x1e /* Mirror Egress Divider: 16bit */
-#define ROBO_MIRROR_EGR_MAC_ADDR 0x20 /* Egress Mirror MAC Addr: 48bit*/
-
-/* BCM5325m MIB AUTOCAST REGISTERS (0x03) REGISTER MAP: 8/16/48 bit regs */
-#define ROBO_MIB_AC_PORT 0x00 /* MIB Autocast Port: 16bit */
-#define ROBO_MIB_AC_HDR_PTR 0x02 /* MIB Autocast Header pointer:16bit*/
-#define ROBO_MIB_AC_HDR_LEN 0x04 /* MIB Autocast Header Len: 16bit */
-#define ROBO_MIB_AC_DA 0x06 /* MIB Autocast DA: 48bit */
-#define ROBO_MIB_AC_SA 0x0c /* MIB Autocast SA: 48bit */
-#define ROBO_MIB_AC_TYPE 0x12 /* MIB Autocast Type: 16bit */
-#define ROBO_MIB_AC_RATE 0x14 /* MIB Autocast Rate: 8bit */
-#define ROBO_GET_AC_RATE(secs) ((secs)*10)
-#define ROBO_AC_RATE_MAX 0xff
-#define ROBO_AC_RATE_DEFAULT 0x64 /* 10 secs */
-typedef struct _ROBO_MIB_AC_STRUCT
-{
- unsigned char opcode:4; /* Tx MIB Autocast opcode */
- unsigned char portno:4; /* zero-based port no. */
- unsigned char portstate:8; /* port state */
- unsigned long long TxOctets;
- unsigned int TxDropPkts;
- unsigned int rsvd;
- unsigned int TxBroadcastPkts;
- unsigned int TxMulticastPkts;
- unsigned int TxUnicastPkts;
- unsigned int TxCollisions;
- unsigned int TxSingleCollision;
- unsigned int TxMultiCollision;
- unsigned int TxDeferredTransmit;
- unsigned int TxLateCollision;
- unsigned int TxExcessiveCollision;
- unsigned int TxFrameInDiscards;
- unsigned int TxPausePkts;
- unsigned int rsvd1[2];
- unsigned long long RxOctets;
- unsigned int RxUndersizePkts;
- unsigned int RxPausePkts;
- unsigned int RxPkts64Octets;
- unsigned int RxPkts64to127Octets;
- unsigned int RxPkts128to255Octets;
- unsigned int RxPkts256to511Octets;
- unsigned int RxPkts512to1023Octets;
- unsigned int RxPkts1024to1522Octets;
- unsigned int RxOversizePkts;
- unsigned int RxJabbers;
- unsigned int RxAlignmentErrors;
- unsigned int RxFCSErrors;
- unsigned long long RxGoodOctets;
- unsigned int RxDropPkts;
- unsigned int RxUnicastPkts;
- unsigned int RxMulticastPkts;
- unsigned int RxBroadcastPkts;
- unsigned int RxSAChanges;
- unsigned int RxFragments;
- unsigned int RxExcessSizeDisc;
- unsigned int RxSymbolError;
-} ROBO_MIB_AC_STRUCT;
-
-/* BCM5325m ARL CONTROL REGISTERS (0x04) REGISTER MAP: 8/16/48/64 bit regs */
-#define ROBO_ARL_CONFIG 0x00 /* ARL Global Configuration: 8bit*/
-#define ROBO_BPDU_MC_ADDR_REG 0x04 /* BPDU Multicast Address Reg:64bit*/
-#define ROBO_MULTIPORT_ADDR_1 0x10 /* Multiport Address 1: 48 bits*/
-#define ROBO_MULTIPORT_VECTOR_1 0x16 /* Multiport Vector 1: 16 bits */
-#define ROBO_MULTIPORT_ADDR_2 0x20 /* Multiport Address 2: 48 bits*/
-#define ROBO_MULTIPORT_VECTOR_2 0x26 /* Multiport Vector 2: 16 bits */
-#define ROBO_SECURE_SRC_PORT_MASK 0x30 /* Secure Source Port Mask: 16 bits*/
-#define ROBO_SECURE_DST_PORT_MASK 0x32 /* Secure Dest Port Mask: 16 bits */
-
-
-/* BCM5325m ARL IO REGISTERS (0x05) REGISTER MAP: 8/16/48/64 bit regs */
-#define ARL_TABLE_WRITE 0 /* for read/write state in control reg */
-#define ARL_TABLE_READ 1 /* for read/write state in control reg */
-#ifdef BCM5380
-#define ARL_VID_BYTES 2 /* number of bytes for VID */
-#else
-#define ARL_VID_BYTES 1 /* number of bytes for VID */
-#endif
-typedef struct _ROBO_ARL_RW_CTRL_STRUC
-{
- unsigned char ARLrw:1; /* ARL read/write (1=read) */
- unsigned char rsvd:6; /* reserved */
- unsigned char ARLStart:1; /* ARL start/done (1=start) */
-} ROBO_ARL_RW_CTRL_STRUC;
-typedef struct _ROBO_ARL_SEARCH_CTRL_STRUC
-{
- unsigned char valid:1; /* ARL search result valid */
- unsigned char rsvd:6; /* reserved */
- unsigned char ARLStart:1; /* ARL start/done (1=start) */
-} ROBO_ARL_SEARCH_CTRL_STRUC;
-typedef struct _ROBO_ARL_ENTRY_CTRL_STRUC
-{
- unsigned char portID:4; /* port id */
- unsigned char chipID:2; /* chip id */
- unsigned char rsvd:5; /* reserved */
- unsigned char prio:2; /* priority */
- unsigned char age:1; /* age */
- unsigned char staticEn:1; /* static */
- unsigned char valid:1; /* valid */
-} ROBO_ARL_ENTRY_CTRL_STRUC;
-typedef struct _ROBO_ARL_SEARCH_RESULT_CTRL_STRUC
-{
- unsigned char portID:4; /* port id */
- unsigned char rsvd:1; /* reserved */
- unsigned char vid:8; /* vlan id */
- unsigned char age:1; /* age */
- unsigned char staticEn:1; /* static */
- unsigned char valid:1; /* valid */
-} ROBO_ARL_SEARCH_RESULT_CTRL_STRUC;
-typedef struct _ROBO_ARL_ENTRY_MAC_STRUC
-{
- unsigned char macBytes[6]; /* MAC address */
-} ROBO_ARL_ENTRY_MAC_STRUC;
-
-typedef struct _ROBO_ARL_ENTRY_STRUC
-{
- ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */
- ROBO_ARL_ENTRY_CTRL_STRUC ctrl; /* control bits */
-} ROBO_ARL_ENTRY_STRUC;
-
-typedef struct _ROBO_ARL_SEARCH_RESULT_STRUC
-{
- ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */
- ROBO_ARL_SEARCH_RESULT_CTRL_STRUC ctrl; /* control bits */
-} ROBO_ARL_SEARCH_RESULT_STRUC;
-
-/* multicast versions of ARL entry structs */
-typedef struct _ROBO_ARL_ENTRY_MCAST_CTRL_STRUC
-{
- unsigned int portMask:12;/* multicast port mask */
- unsigned char prio:1; /* priority */
- unsigned char gigPort:1; /* gigabit port 1 mask */
- unsigned char staticEn:1; /* static */
- unsigned char valid:1; /* valid */
-} ROBO_ARL_ENTRY_MCAST_CTRL_STRUC;
-typedef struct _ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC
-{
- unsigned int portMask:13; /* multicast port mask */
- unsigned char age:1; /* age */
- unsigned char staticEn:1; /* static */
- unsigned char valid:1; /* valid */
-} ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC;
-/* BCM5350 extension register */
-typedef struct _ROBO_ARL_SEARCH_RESULT_EXTENSION
-{
- unsigned int prio:2; /* priority */
- unsigned int portMask:1; /* MSB (MII) of port mask for multicast */
- unsigned int reserved:5;
-} ROBO_ARL_SEARCH_RESULT_EXTENSION;
-
-typedef struct _ROBO_ARL_ENTRY_MCAST_STRUC
-{
- ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */
- ROBO_ARL_ENTRY_MCAST_CTRL_STRUC ctrl; /* control bits */
-} ROBO_ARL_ENTRY_MCAST_STRUC;
-typedef struct _ROBO_ARL_SEARCH_RESULT_MCAST_STRUC
-{
- ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */
- ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC ctrl; /* control bits */
-} ROBO_ARL_SEARCH_RESULT_MCAST_STRUC;
-
-#define ROBO_ARL_RW_CTRL 0x00 /* ARL Read/Write Control : 8bit */
-#define ROBO_ARL_MAC_ADDR_IDX 0x02 /* MAC Address Index: 48bit */
-#define ROBO_ARL_VID_TABLE_IDX 0x08 /* VID Table Address Index: 8bit */
-#define ROBO_ARL_ENTRY0 0x10 /* ARL Entry 0 : 64 bit */
-#define ROBO_ARL_ENTRY1 0x18 /* ARL Entry 1 : 64 bit */
-#define ROBO_ARL_SEARCH_CTRL 0x20 /* ARL Search Control: 8bit */
-#define ROBO_ARL_SEARCH_ADDR 0x22 /* ARL Search Address: 16bit */
-#define ROBO_ARL_SEARCH_RESULT 0x24 /* ARL Search Result: 64bit */
-#define ROBO_ARL_SEARCH_RESULT_EXT 0x2c /* ARL Search Result Extension (5350): 8bit */
-#define ROBO_ARL_VID_ENTRY0 0x30 /* ARL VID Entry 0: 64bit */
-#define ROBO_ARL_VID_ENTRY1 0x32 /* ARL VID Entry 1: 64bit */
-
-/* BCM5325m MANAGEMENT FRAME REGISTERS (0x6) REGISTER MAP: 8/16 bit regs */
-#define ROBO_MGMT_FRAME_RD_DATA 0x00 /* Management Frame Read Data :8bit*/
-#define ROBO_MGMT_FRAME_WR_DATA 0x01 /* Management Frame Write Data:8bit*/
-#define ROBO_MGMT_FRAME_WR_CTRL 0x02 /* Write Control: 16bit */
-#define ROBO_MGMT_FRAME_RD_STAT 0x04 /* Read Status: 16bit */
-
-/* BCM5325m MEMORY ACCESS REGISTERS (Page 0x08) REGISTER MAP: 32 bit regs */
-#define MEM_TABLE_READ 1 /* for read/write state in mem access reg */
-#define MEM_TABLE_WRITE 0 /* for read/write state in mem access reg */
-#define MEM_TABLE_ACCESS_START 1 /* for mem access read/write start */
-#define MEM_TABLE_ACCESS_DONE 0 /* for mem access read/write done */
-#define VLAN_TABLE_ADDR 0x3800 /* BCM5380 only */
-#ifdef BCM5380
-#define NUM_ARL_TABLE_ENTRIES 4096 /* number of entries in ARL table */
-#define NUM_VLAN_TABLE_ENTRIES 2048 /* number of entries in VLAN table */
-#define ARL_TABLE_ADDR 0 /* offset of ARL table start */
-#else
-#define NUM_ARL_TABLE_ENTRIES 2048 /* number of entries in ARL table */
-#define NUM_VLAN_TABLE_ENTRIES 256 /* number of entries in VLAN table */
-#define ARL_TABLE_ADDR 0x3800 /* offset of ARL table start */
-/* corresponding values for 5350 */
-#define NUM_ARL_TABLE_ENTRIES_5350 1024 /* number of entries in ARL table (5350) */
-#define NUM_VLAN_TABLE_ENTRIES_5350 16 /* number of entries in VLAN table */
-#define ARL_TABLE_ADDR_5350 0x1c00 /* offset of ARL table start (5350) */
-#endif
-typedef struct _ROBO_MEM_ACCESS_CTRL_STRUC
-{
- unsigned int memAddr:14; /* 64-bit memory address */
- unsigned char rsvd:4; /* reserved */
- unsigned char readEn:1; /* read enable (0 == write) */
- unsigned char startDone:1;/* memory access start/done */
- unsigned int rsvd1:12; /* reserved */
-} ROBO_MEM_ACCESS_CTRL_STRUC;
-typedef struct _ROBO_MEM_ACCESS_DATA_STRUC
-{
- unsigned int memData[2]; /* 64-bit data */
- unsigned short rsvd; /* reserved */
-} ROBO_MEM_ACCESS_DATA_STRUC;
-
-#ifdef BCM5380
-typedef struct _ROBO_ARL_TABLE_DATA_STRUC
-{
- unsigned char MACaddr[6]; /* MAC addr */
- unsigned int portID:4; /* port ID */
- unsigned int chipID:2; /* chip ID */
- unsigned int rsvd:6; /* reserved */
- unsigned int highPrio:1; /* high priority address */
- unsigned int age:1; /* entry accessed/learned since ageing process */
- unsigned int staticAddr:1;/* entry is static */
- unsigned int valid:1; /* entry is valid */
- unsigned int vid:12; /* vlan id */
- unsigned int rsvd2:4; /* reserved */
-} ROBO_ARL_TABLE_DATA_STRUC;
-#else
-typedef struct _ROBO_ARL_TABLE_DATA_STRUC
-{
- unsigned char MACaddr[6]; /* MAC addr */
- unsigned int portID:4; /* port ID */
- unsigned int chipID:2; /* chip ID */
- unsigned int rsvd:7; /* reserved */
- unsigned int age:1; /* entry accessed/learned since ageing process */
- unsigned int staticAddr:1;/* entry is static */
- unsigned int valid:1; /* entry is valid */
-} ROBO_ARL_TABLE_DATA_STRUC;
-#endif
-
-/* multicast format*/
-typedef struct _ROBO_ARL_TABLE_MCAST_DATA_STRUC
-{
- unsigned char MACaddr[6]; /* MAC addr */
- unsigned int portMask:12;/* multicast port mask */
- unsigned char prio:1; /* priority */
- unsigned char gigPort:1; /* gigabit port 1 mask */
- unsigned char staticEn:1; /* static */
- unsigned char valid:1; /* valid */
- unsigned int vid:12; /* vlan id */
- unsigned int rsvd2:4; /* reserved */
-} ROBO_ARL_TABLE_MCAST_DATA_STRUC;
-#define ROBO_MEM_ACCESS_CTRL 0x00 /* Memory Read/Write Control :32bit*/
-#define ROBO_MEM_ACCESS_DATA 0x04 /* Memory Read/Write Data:64bit*/
-
-/* BCM5325m SWITCH PORT (0x10-18) REGISTER MAP: 8/16 bit regs */
-typedef struct _ROBO_MII_CTRL_STRUC
-{
- unsigned char rsvd:8; /* reserved */
- unsigned char duplex:1; /* duplex mode */
- unsigned char restartAN:1;/* restart auto-negotiation */
- unsigned char rsvd1:1; /* reserved */
- unsigned char powerDown:1;/* power down */
- unsigned char ANenable:1; /* auto-negotiation enable */
- unsigned char speed:1; /* forced speed selection */
- unsigned char loopback:1; /* loopback */
- unsigned char reset:1; /* reset */
-} ROBO_MII_CTRL_STRUC;
-typedef struct _ROBO_MII_AN_ADVERT_STRUC
-{
- unsigned char selector:5; /* advertise selector field */
- unsigned char T10BaseT:1; /* advertise 10BaseT */
- unsigned char T10BaseTFull:1; /* advertise 10BaseT, full duplex */
- unsigned char T100BaseX:1; /* advertise 100BaseX */
- unsigned char T100BaseXFull:1;/* advertise 100BaseX full duplex */
- unsigned char noT4:1; /* do not advertise T4 */
- unsigned char pause:1; /* advertise pause for full duplex */
- unsigned char rsvd:2; /* reserved */
- unsigned char remoteFault:1; /* transmit remote fault */
- unsigned char rsvd1:1; /* reserved */
- unsigned char nextPage:1; /* nex page operation supported */
-} ROBO_MII_AN_ADVERT_STRUC;
-#define ROBO_MII_CTRL 0x00 /* Port MII Control */
-#define ROBO_MII_STAT 0x02 /* Port MII Status */
-/* Fields of link status register */
-#define ROBO_MII_STAT_JABBER (1<<1) /* Jabber detected */
-#define ROBO_MII_STAT_LINK (1<<2) /* Link status */
-
-#define ROBO_MII_PHYID_HI 0x04 /* Port PHY ID High */
-#define ROBO_MII_PHYID_LO 0x06 /* Port PHY ID Low */
-#define ROBO_MII_ANA_REG 0x08 /* MII Auto-Neg Advertisement */
-#define ROBO_MII_ANP_REG 0x0a /* MII Auto-Neg Partner Ability */
-#define ROBO_MII_AN_EXP_REG 0x0c /* MII Auto-Neg Expansion */
-#define ROBO_MII_AN_NP_REG 0x0e /* MII next page */
-#define ROBO_MII_ANP_NP_REG 0x10 /* MII Partner next page */
-#define ROBO_MII_100BX_AUX_CTRL 0x20 /* 100BASE-X Auxiliary Control */
-#define ROBO_MII_100BX_AUX_STAT 0x22 /* 100BASE-X Auxiliary Status */
-#define ROBO_MII_100BX_RCV_ERR_CTR 0x24 /* 100BASE-X Receive Error Ctr */
-#define ROBO_MII_100BX_RCV_FS_ERR 0x26 /* 100BASE-X Rcv False Sense Ctr */
-#define ROBO_MII_AUX_CTRL 0x30 /* Auxiliary Control/Status */
-/* Fields of Auxiliary control register */
-#define ROBO_MII_AUX_CTRL_FD (1<<0) /* Full duplex link detected*/
-#define ROBO_MII_AUX_CTRL_SP100 (1<<1) /* Speed 100 indication */
-#define ROBO_MII_AUX_STATUS 0x32 /* Aux Status Summary */
-#define ROBO_MII_CONN_STATUS 0x34 /* Aux Connection Status */
-#define ROBO_MII_AUX_MODE2 0x36 /* Aux Mode 2 */
-#define ROBO_MII_AUX_ERR_STATUS 0x38 /* Aux Error and General Status */
-#define ROBO_MII_AUX_MULTI_PHY 0x3c /* Aux Multiple PHY Register*/
-#define ROBO_MII_BROADCOM_TEST 0x3e /* Broadcom Test Register */
-
-
-/* BCM5325m PORT MIB REGISTERS (Pages 0x20-0x24,0x28) REGISTER MAP: 64/32 */
-/* Tranmit Statistics */
-#define ROBO_MIB_TX_OCTETS 0x00 /* 64b: TxOctets */
-#define ROBO_MIB_TX_DROP_PKTS 0x08 /* 32b: TxDropPkts */
-#define ROBO_MIB_TX_BC_PKTS 0x10 /* 32b: TxBroadcastPkts */
-#define ROBO_MIB_TX_MC_PKTS 0x14 /* 32b: TxMulticastPkts */
-#define ROBO_MIB_TX_UC_PKTS 0x18 /* 32b: TxUnicastPkts */
-#define ROBO_MIB_TX_COLLISIONS 0x1c /* 32b: TxCollisions */
-#define ROBO_MIB_TX_SINGLE_COLLISIONS 0x20 /* 32b: TxSingleCollision */
-#define ROBO_MIB_TX_MULTI_COLLISIONS 0x24 /* 32b: TxMultiCollision */
-#define ROBO_MIB_TX_DEFER_TX 0x28 /* 32b: TxDeferred Transmit */
-#define ROBO_MIB_TX_LATE_COLLISIONS 0x2c /* 32b: TxLateCollision */
-#define ROBO_MIB_EXCESS_COLLISIONS 0x30 /* 32b: TxExcessiveCollision*/
-#define ROBO_MIB_FRAME_IN_DISCARDS 0x34 /* 32b: TxFrameInDiscards */
-#define ROBO_MIB_TX_PAUSE_PKTS 0x38 /* 32b: TxPausePkts */
-
-/* Receive Statistics */
-#define ROBO_MIB_RX_OCTETS 0x44 /* 64b: RxOctets */
-#define ROBO_MIB_RX_UNDER_SIZE_PKTS 0x4c /* 32b: RxUndersizePkts(runts)*/
-#define ROBO_MIB_RX_PAUSE_PKTS 0x50 /* 32b: RxPausePkts */
-#define ROBO_MIB_RX_PKTS_64 0x54 /* 32b: RxPkts64Octets */
-#define ROBO_MIB_RX_PKTS_65_TO_127 0x58 /* 32b: RxPkts64to127Octets*/
-#define ROBO_MIB_RX_PKTS_128_TO_255 0x5c /* 32b: RxPkts128to255Octets*/
-#define ROBO_MIB_RX_PKTS_256_TO_511 0x60 /* 32b: RxPkts256to511Octets*/
-#define ROBO_MIB_RX_PKTS_512_TO_1023 0x64 /* 32b: RxPkts512to1023Octets*/
-#define ROBO_MIB_RX_PKTS_1024_TO_1522 0x68 /* 32b: RxPkts1024to1522Octets*/
-#define ROBO_MIB_RX_OVER_SIZE_PKTS 0x6c /* 32b: RxOversizePkts*/
-#define ROBO_MIB_RX_JABBERS 0x70 /* 32b: RxJabbers*/
-#define ROBO_MIB_RX_ALIGNMENT_ERRORS 0x74 /* 32b: RxAlignmentErrors*/
-#define ROBO_MIB_RX_FCS_ERRORS 0x78 /* 32b: RxFCSErrors */
-#define ROBO_MIB_RX_GOOD_OCTETS 0x7c /* 32b: RxGoodOctets */
-#define ROBO_MIB_RX_DROP_PKTS 0x84 /* 32b: RxDropPkts */
-#define ROBO_MIB_RX_UC_PKTS 0x88 /* 32b: RxUnicastPkts */
-#define ROBO_MIB_RX_MC_PKTS 0x8c /* 32b: RxMulticastPkts */
-#define ROBO_MIB_RX_BC_PKTS 0x90 /* 32b: RxBroadcastPkts */
-#define ROBO_MIB_RX_SA_CHANGES 0x94 /* 32b: RxSAChanges */
-#define ROBO_MIB_RX_FRAGMENTS 0x98 /* 32b: RxFragments */
-#define ROBO_MIB_RX_EXCESS_SZ_DISC 0x9c /* 32b: RxExcessSizeDisc*/
-#define ROBO_MIB_RX_SYMBOL_ERROR 0xa0 /* 32b: RxSymbolError */
-
-/* BCM5350 MIB Statistics */
-/* Group 0 */
-#define ROBO_MIB_TX_GOOD_PKTS 0x00 /* 16b: TxGoodPkts */
-#define ROBO_MIB_TX_UNICAST_PKTS 0x02 /* 16b: TxUnicastPkts */
-#define ROBO_MIB_RX_GOOD_PKTS 0x04 /* 16b: RxGoodPkts */
-#define ROBO_MIB_RX_GOOD_UNICAST_PKTS 0x06 /* 16b: RxGoodUnicastPkts */
-/* Group 1 */
-#define ROBO_MIB_TX_COLLISION 0x00 /* 16b: TxCollision */
-#define ROBO_MIB_TX_OCTETS_5350 0x02 /* 16b: TxOctets */
-#define ROBO_MIB_RX_FCS_ERRORS_5350 0x04 /* 16b: RxFCSErrors */
-#define ROBO_MIB_RX_GOOD_OCTETS_5350 0x06 /* 16b: RxGoodOctets */
-
-/* BCM5325m QoS REGISTERS (Page 0x30) REGISTER MAP: 8/16 */
-#define ROBO_QOS_CTRL 0x00 /* 16b: QoS Control Register */
-#define ROBO_QOS_LOCAL_WEIGHT_CTRL 0x10 /* 8b: Local HQ/LQ Weight Register*/
-#define ROBO_QOS_CPU_WEIGHT_CTRL 0x12 /* 8b: CPU HQ/LQ Weight Register*/
-#define ROBO_QOS_PAUSE_ENA 0x13 /* 16b: Qos Pause Enable Register*/
-#define ROBO_QOS_PRIO_THRESHOLD 0x15 /* 8b: Priority Threshold Register*/
-#define ROBO_QOS_RESERVED 0x16 /* 8b: Qos Reserved Register */
-
-/* BCM5325m VLAN REGISTERS (Page 0x34) REGISTER MAP: 8/16bit */
-typedef struct _ROBO_VLAN_CTRL0_STRUC
-{
- unsigned char frameControlP:2; /* 802.1P frame control */
- unsigned char frameControlQ:2; /* 802.1Q frame control */
- unsigned char dropMissedVID:1; /* enable drop missed VID packet */
- unsigned char vidMacHash:1; /* VID_MAC hash enable */
- unsigned char vidMacCheck:1; /* VID_MAC check enable */
- unsigned char VLANen:1; /* 802.1Q VLAN enable */
-} ROBO_VLAN_CTRL0_STRUC;
-#define VLAN_TABLE_WRITE 1 /* for read/write state in table access reg */
-#define VLAN_TABLE_READ 0 /* for read/write state in table access reg */
-#define VLAN_ID_HIGH_BITS 0 /* static high bits in table access reg */
-#define VLAN_ID_MAX 255 /* max VLAN id */
-#define VLAN_ID_MAX5350 15 /* max VLAN id (5350) */
-#define VLAN_ID_MASK VLAN_ID_MAX /* VLAN id mask */
-#ifdef BCM5380
-#define VLAN_UNTAG_SHIFT 13 /* for postioning untag bits in write reg */
-#define VLAN_VALID 0x4000000 /* valid bit in write reg */
-#else
-#define VLAN_UNTAG_SHIFT 7 /* for postioning untag bits in write reg */
-#define VLAN_VALID 0x4000 /* valid bit in write reg */
-/* corresponding values for 5350 */
-#define VLAN_UNTAG_SHIFT_5350 6 /* for postioning untag bits in write reg */
-#define VLAN_VALID_5350 0x00100000 /* valid bit in write reg */
-#endif
-typedef struct _ROBO_VLAN_TABLE_ACCESS_STRUC
-{
- unsigned char VLANid:8; /* VLAN ID (low 8 bits) */
- unsigned char VLANidHi:4; /* VLAN ID (fixed upper portion) */
- unsigned char readWriteState:1; /* read/write state (write = 1) */
- volatile unsigned char readWriteEnable:1; /* table read/write enable */
- unsigned char rsvd:2; /* reserved */
-} ROBO_VLAN_TABLE_ACCESS_STRUC;
-#ifdef BCM5380
-typedef struct _ROBO_VLAN_READ_WRITE_STRUC
-{
- unsigned int VLANgroup:13;/* VLAN group mask */
- unsigned int VLANuntag:13;/* VLAN untag enable mask */
- unsigned char valid:1; /* valid */
- unsigned char rsvd:5; /* reserved */
-} ROBO_VLAN_READ_WRITE_STRUC;
-#else
-typedef struct _ROBO_VLAN_READ_WRITE_STRUC
-{
- unsigned char VLANgroup:7; /* VLAN group mask */
- unsigned char VLANuntag:7; /* VLAN untag enable mask */
- unsigned char valid:1; /* valid */
- unsigned char rsvd:1; /* reserved */
-} ROBO_VLAN_READ_WRITE_STRUC;
-typedef struct _ROBO_VLAN_READ_WRITE_STRUC_5350
-{
- unsigned char VLANgroup:6; /* VLAN group mask */
- unsigned char VLANuntag:6; /* VLAN untag enable mask */
- unsigned char highVID:8; /* upper bits of vid */
- unsigned char valid:1; /* valid */
- unsigned int rsvd:11; /* reserved */
-} ROBO_VLAN_READ_WRITE_STRUC_5350;
-#endif
-#define ROBO_VLAN_CTRL0 0x00 /* 8b: VLAN Control 0 Register */
-#define ROBO_VLAN_CTRL1 0x01 /* 8b: VLAN Control 1 Register */
-#define ROBO_VLAN_CTRL2 0x02 /* 8b: VLAN Control 2 Register */
-#define ROBO_VLAN_CTRL3 0x03 /* 8b: VLAN Control 3 Register */
-#define ROBO_VLAN_CTRL4 0x04 /* 8b: VLAN Control 4 Register */
-#define ROBO_VLAN_CTRL5 0x05 /* 8b: VLAN Control 5 Register */
-#define ROBO_VLAN_TABLE_ACCESS 0x08 /* 14b: VLAN Table Access Register */
-#define ROBO_VLAN_TABLE_ACCESS_5350 0x06 /* 14b: VLAN Table Access Register (5350) */
-#define ROBO_VLAN_WRITE 0x0a /* 15b: VLAN Write Register */
-#define ROBO_VLAN_WRITE_5350 0x08 /* 15b: VLAN Write Register (5350) */
-#define ROBO_VLAN_READ 0x0c /* 15b: VLAN Read Register */
-#define ROBO_VLAN_PORT0_DEF_TAG 0x10 /* 16b: VLAN Port 0 Default Tag Register */
-#define ROBO_VLAN_PORT1_DEF_TAG 0x12 /* 16b: VLAN Port 1 Default Tag Register */
-#define ROBO_VLAN_PORT2_DEF_TAG 0x14 /* 16b: VLAN Port 2 Default Tag Register */
-#define ROBO_VLAN_PORT3_DEF_TAG 0x16 /* 16b: VLAN Port 3 Default Tag Register */
-#define ROBO_VLAN_PORT4_DEF_TAG 0x18 /* 16b: VLAN Port 4 Default Tag Register */
-#define ROBO_VLAN_PORTMII_DEF_TAG 0x1a /* 16b: VLAN Port MII Default Tag Register */
-/* 5380 only */
-#define ROBO_VLAN_PORT5_DEF_TAG 0x1a /* 16b: VLAN Port 5 Default Tag Register */
-#define ROBO_VLAN_PORT6_DEF_TAG 0x1c /* 16b: VLAN Port 6 Default Tag Register */
-#define ROBO_VLAN_PORT7_DEF_TAG 0x1e /* 16b: VLAN Port 7 Default Tag Register */
-
-/* obsolete */
-#define ROBO_VLAN_PORT0_CTRL 0x00 /* 16b: Port 0 VLAN Register */
-#define ROBO_VLAN_PORT1_CTRL 0x02 /* 16b: Port 1 VLAN Register */
-#define ROBO_VLAN_PORT2_CTRL 0x04 /* 16b: Port 2 VLAN Register */
-#define ROBO_VLAN_PORT3_CTRL 0x06 /* 16b: Port 3 VLAN Register */
-#define ROBO_VLAN_PORT4_CTRL 0x08 /* 16b: Port 4 VLAN Register */
-#define ROBO_VLAN_IM_PORT_CTRL 0x10 /* 16b: Inverse MII Port VLAN Reg */
-#define ROBO_VLAN_SMP_PORT_CTRL 0x12 /* 16b: Serial Port VLAN Register */
-#define ROBO_VLAN_PORTSPI_DEF_TAG 0x1c /* 16b: VLAN Port SPI Default Tag Register */
-#define ROBO_VLAN_PRIORITY_REMAP 0x20 /* 24b: VLAN Priority Re-Map Register */
-
-#ifndef _CFE_
-#pragma pack()
-#endif
-
-
-#endif /* !__BCM535M_H_ */
-
-
-
-
-
diff --git a/package/robocfg/src/robocfg.c b/package/robocfg/src/robocfg.c
deleted file mode 100644
index 7a4094dd41..0000000000
--- a/package/robocfg/src/robocfg.c
+++ /dev/null
@@ -1,581 +0,0 @@
-/*
- * Broadcom BCM5325E/536x switch configuration utility
- *
- * Copyright (C) 2005 Oleg I. Vdovikin
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <errno.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/param.h>
-#include <sys/ioctl.h>
-#include <sys/socket.h>
-
-/* linux stuff */
-typedef u_int64_t u64;
-typedef u_int32_t u32;
-typedef u_int16_t u16;
-typedef u_int8_t u8;
-
-#include <linux/if.h>
-#include <linux/sockios.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-
-#include "etc53xx.h"
-#define ROBO_PHY_ADDR 0x1E /* robo switch phy address */
-
-/* MII registers */
-#define REG_MII_PAGE 0x10 /* MII Page register */
-#define REG_MII_ADDR 0x11 /* MII Address register */
-#define REG_MII_DATA0 0x18 /* MII Data register 0 */
-
-#define REG_MII_PAGE_ENABLE 1
-#define REG_MII_ADDR_WRITE 1
-#define REG_MII_ADDR_READ 2
-
-/* Private et.o ioctls */
-#define SIOCGETCPHYRD (SIOCDEVPRIVATE + 9)
-#define SIOCSETCPHYWR (SIOCDEVPRIVATE + 10)
-
-typedef struct {
- struct ifreq ifr;
- int fd;
- int et; /* use private ioctls */
-} robo_t;
-
-static u16 mdio_read(robo_t *robo, u16 phy_id, u8 reg)
-{
- if (robo->et) {
- int args[2] = { reg };
-
- if (phy_id != ROBO_PHY_ADDR) {
- fprintf(stderr,
- "Access to real 'phy' registers unavaliable.\n"
- "Upgrade kernel driver.\n");
-
- return 0xffff;
- }
-
- robo->ifr.ifr_data = (caddr_t) args;
- if (ioctl(robo->fd, SIOCGETCPHYRD, (caddr_t)&robo->ifr) < 0) {
- perror("SIOCGETCPHYRD");
- exit(1);
- }
-
- return args[1];
- } else {
- struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&robo->ifr.ifr_data;
- mii->phy_id = phy_id;
- mii->reg_num = reg;
- if (ioctl(robo->fd, SIOCGMIIREG, &robo->ifr) < 0) {
- perror("SIOCGMIIREG");
- exit(1);
- }
- return mii->val_out;
- }
-}
-
-static void mdio_write(robo_t *robo, u16 phy_id, u8 reg, u16 val)
-{
- if (robo->et) {
- int args[2] = { reg, val };
-
- if (phy_id != ROBO_PHY_ADDR) {
- fprintf(stderr,
- "Access to real 'phy' registers unavaliable.\n"
- "Upgrade kernel driver.\n");
- return;
- }
-
- robo->ifr.ifr_data = (caddr_t) args;
- if (ioctl(robo->fd, SIOCSETCPHYWR, (caddr_t)&robo->ifr) < 0) {
- perror("SIOCGETCPHYWR");
- exit(1);
- }
- } else {
- struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&robo->ifr.ifr_data;
- mii->phy_id = phy_id;
- mii->reg_num = reg;
- mii->val_in = val;
- if (ioctl(robo->fd, SIOCSMIIREG, &robo->ifr) < 0) {
- perror("SIOCSMIIREG");
- exit(1);
- }
- }
-}
-
-static int robo_reg(robo_t *robo, u8 page, u8 reg, u8 op)
-{
- int i = 3;
-
- /* set page number */
- mdio_write(robo, ROBO_PHY_ADDR, REG_MII_PAGE,
- (page << 8) | REG_MII_PAGE_ENABLE);
-
- /* set register address */
- mdio_write(robo, ROBO_PHY_ADDR, REG_MII_ADDR,
- (reg << 8) | op);
-
- /* check if operation completed */
- while (i--) {
- if ((mdio_read(robo, ROBO_PHY_ADDR, REG_MII_ADDR) & 3) == 0)
- return 0;
- }
-
- fprintf(stderr, "robo_reg: timeout\n");
- exit(1);
-
- return 0;
-}
-
-static void robo_read(robo_t *robo, u8 page, u8 reg, u16 *val, int count)
-{
- int i;
-
- robo_reg(robo, page, reg, REG_MII_ADDR_READ);
-
- for (i = 0; i < count; i++)
- val[i] = mdio_read(robo, ROBO_PHY_ADDR, REG_MII_DATA0 + i);
-}
-
-static u16 robo_read16(robo_t *robo, u8 page, u8 reg)
-{
- robo_reg(robo, page, reg, REG_MII_ADDR_READ);
-
- return mdio_read(robo, ROBO_PHY_ADDR, REG_MII_DATA0);
-}
-
-static u32 robo_read32(robo_t *robo, u8 page, u8 reg)
-{
- robo_reg(robo, page, reg, REG_MII_ADDR_READ);
-
- return mdio_read(robo, ROBO_PHY_ADDR, REG_MII_DATA0) +
- (mdio_read(robo, ROBO_PHY_ADDR, REG_MII_DATA0 + 1) << 16);
-}
-
-static void robo_write16(robo_t *robo, u8 page, u8 reg, u16 val16)
-{
- /* write data */
- mdio_write(robo, ROBO_PHY_ADDR, REG_MII_DATA0, val16);
-
- robo_reg(robo, page, reg, REG_MII_ADDR_WRITE);
-}
-
-static void robo_write32(robo_t *robo, u8 page, u8 reg, u32 val32)
-{
- /* write data */
- mdio_write(robo, ROBO_PHY_ADDR, REG_MII_DATA0, val32 & 65535);
- mdio_write(robo, ROBO_PHY_ADDR, REG_MII_DATA0 + 1, val32 >> 16);
-
- robo_reg(robo, page, reg, REG_MII_ADDR_WRITE);
-}
-
-/* checks that attached switch is 5325E/5350 */
-static int robo_vlan5350(robo_t *robo)
-{
- /* set vlan access id to 15 and read it back */
- u16 val16 = 15;
- robo_write16(robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
-
- /* 5365 will refuse this as it does not have this reg */
- return (robo_read16(robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350) == val16);
-}
-
-u8 port[6] = { 0, 1, 2, 3, 4, 8 };
-char ports[6] = { 'W', '4', '3', '2', '1', 'C' };
-char *rxtx[4] = { "enabled", "rx_disabled", "tx_disabled", "disabled" };
-char *stp[8] = { "none", "disable", "block", "listen", "learn", "forward", "6", "7" };
-
-struct {
- char *name;
- u16 bmcr;
-} media[5] = { { "auto", BMCR_ANENABLE | BMCR_ANRESTART },
- { "10HD", 0 }, { "10FD", BMCR_FULLDPLX },
- { "100HD", BMCR_SPEED100 }, { "100FD", BMCR_SPEED100 | BMCR_FULLDPLX } };
-
-struct {
- char *name;
- u16 value;
-} mdix[3] = { { "auto", 0x0000 }, { "on", 0x1800 }, { "off", 0x0800 } };
-
-void usage()
-{
- fprintf(stderr, "Broadcom BCM5325E/536x switch configuration utility\n"
- "Copyright (C) 2005 Oleg I. Vdovikin\n\n"
- "This program is distributed in the hope that it will be useful,\n"
- "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
- "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
- "GNU General Public License for more details.\n\n");
-
- fprintf(stderr, "Usage: robocfg <op> ... <op>\n"
- "Operations are as below:\n"
- "\tshow\n"
- "\tswitch <enable|disable>\n"
- "\tport <port_number> [state <%s|%s|%s|%s>]\n\t\t[stp %s|%s|%s|%s|%s|%s] [tag <vlan_tag>]\n"
- "\t\t[media %s|%s|%s|%s|%s] [mdi-x %s|%s|%s]\n"
- "\tvlan <vlan_number> [ports <ports_list>]\n"
- "\tvlans <enable|disable|reset>\n\n"
- "\tports_list should be one argument, space separated, quoted if needed,\n"
- "\tport number could be followed by 't' to leave packet vlan tagged (CPU \n"
- "\tport default) or by 'u' to untag packet (other ports default) before \n"
- "\tbringing it to the port, '*' is ignored\n"
- "\nSamples:\n"
- "1) ASUS WL-500g Deluxe stock config (eth0 is WAN, eth0.1 is LAN):\n"
- "robocfg switch disable vlans enable reset vlan 0 ports \"0 5u\" vlan 1 ports \"1 2 3 4 5t\""
- " port 0 state enabled stp none switch enable\n"
- "2) WRT54g, WL-500g Deluxe OpenWRT config (vlan0 is LAN, vlan1 is WAN):\n"
- "robocfg switch disable vlans enable reset vlan 0 ports \"1 2 3 4 5t\" vlan 1 ports \"0 5t\""
- " port 0 state enabled stp none switch enable\n",
- rxtx[0], rxtx[1], rxtx[2], rxtx[3], stp[0], stp[1], stp[2], stp[3], stp[4], stp[5],
- media[0].name, media[1].name, media[2].name, media[3].name, media[4].name,
- mdix[0].name, mdix[1].name, mdix[2].name);
-}
-
-static robo_t robo;
-int bcm53xx_probe(const char *dev)
-{
- struct ethtool_drvinfo info;
- unsigned int phyid;
- int ret;
-
- fprintf(stderr, "probing %s\n", dev);
-
- strcpy(robo.ifr.ifr_name, dev);
- memset(&info, 0, sizeof(info));
- info.cmd = ETHTOOL_GDRVINFO;
- robo.ifr.ifr_data = (caddr_t)&info;
- ret = ioctl(robo.fd, SIOCETHTOOL, (caddr_t)&robo.ifr);
- if (ret < 0) {
- perror("SIOCETHTOOL");
- return ret;
- }
-
- if ( strcmp(info.driver, "et0") &&
- strcmp(info.driver, "b44") &&
- strcmp(info.driver, "bcm63xx_enet") ) {
- fprintf(stderr, "driver not supported %s\n", info.driver);
- return -ENOSYS;
- }
-
- /* try access using MII ioctls - get phy address */
- robo.et = 0;
- if (ioctl(robo.fd, SIOCGMIIPHY, &robo.ifr) < 0)
- robo.et = 1;
-
- if (robo.et) {
- unsigned int args[2] = { 2 };
-
- robo.ifr.ifr_data = (caddr_t) args;
- ret = ioctl(robo.fd, SIOCGETCPHYRD, (caddr_t)&robo.ifr);
- if (ret < 0) {
- perror("SIOCGETCPHYRD");
- return ret;
- }
- phyid = args[1] & 0xffff;
-
- args[0] = 3;
- robo.ifr.ifr_data = (caddr_t) args;
- ret = ioctl(robo.fd, SIOCGETCPHYRD, (caddr_t)&robo.ifr);
- if (ret < 0) {
- perror("SIOCGETCPHYRD");
- return ret;
- }
- phyid |= args[1] << 16;
- } else {
- struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&robo.ifr.ifr_data;
- mii->phy_id = ROBO_PHY_ADDR;
- mii->reg_num = 2;
- ret = ioctl(robo.fd, SIOCGMIIREG, &robo.ifr);
- if (ret < 0) {
- perror("SIOCGMIIREG");
- return ret;
- }
- phyid = mii->val_out & 0xffff;
-
- mii->phy_id = ROBO_PHY_ADDR;
- mii->reg_num = 3;
- ret = ioctl(robo.fd, SIOCGMIIREG, &robo.ifr);
- if (ret < 0) {
- perror("SIOCGMIIREG");
- return ret;
- }
- phyid |= mii->val_out << 16;
- }
-
- if (phyid == 0xffffffff || phyid == 0x55210022) {
- perror("phyid");
- return -EIO;
- }
-
- return 0;
-}
-
-int
-main(int argc, char *argv[])
-{
- u16 val16;
- u16 mac[3];
- int i = 0, j;
- int robo5350 = 0;
- u32 phyid;
-
- if ((robo.fd = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
- perror("socket");
- exit(1);
- }
-
- if (bcm53xx_probe("eth1")) {
- if (bcm53xx_probe("eth0")) {
- perror("bcm53xx_probe");
- exit(1);
- }
- }
-
- robo5350 = robo_vlan5350(&robo);
-
- for (i = 1; i < argc;) {
- if (strcasecmp(argv[i], "port") == 0 && (i + 1) < argc)
- {
- int index = atoi(argv[++i]);
- /* read port specs */
- while (++i < argc) {
- if (strcasecmp(argv[i], "state") == 0 && ++i < argc) {
- for (j = 0; j < 4 && strcasecmp(argv[i], rxtx[j]); j++);
- if (j < 4) {
- /* change state */
- robo_write16(&robo,ROBO_CTRL_PAGE, port[index],
- (robo_read16(&robo, ROBO_CTRL_PAGE, port[index]) & ~(3 << 0)) | (j << 0));
- } else {
- fprintf(stderr, "Invalid state '%s'.\n", argv[i]);
- exit(1);
- }
- } else
- if (strcasecmp(argv[i], "stp") == 0 && ++i < argc) {
- for (j = 0; j < 8 && strcasecmp(argv[i], stp[j]); j++);
- if (j < 8) {
- /* change stp */
- robo_write16(&robo,ROBO_CTRL_PAGE, port[index],
- (robo_read16(&robo, ROBO_CTRL_PAGE, port[index]) & ~(7 << 5)) | (j << 5));
- } else {
- fprintf(stderr, "Invalid stp '%s'.\n", argv[i]);
- exit(1);
- }
- } else
- if (strcasecmp(argv[i], "media") == 0 && ++i < argc) {
- for (j = 0; j < 5 && strcasecmp(argv[i], media[j].name); j++);
- if (j < 5) {
- mdio_write(&robo, port[index], MII_BMCR, media[j].bmcr);
- } else {
- fprintf(stderr, "Invalid media '%s'.\n", argv[i]);
- exit(1);
- }
- } else
- if (strcasecmp(argv[i], "mdi-x") == 0 && ++i < argc) {
- for (j = 0; j < 3 && strcasecmp(argv[i], mdix[j].name); j++);
- if (j < 3) {
- mdio_write(&robo, port[index], 0x1c, mdix[j].value |
- (mdio_read(&robo, port[index], 0x1c) & ~0x1800));
- } else {
- fprintf(stderr, "Invalid mdi-x '%s'.\n", argv[i]);
- exit(1);
- }
- } else
- if (strcasecmp(argv[i], "tag") == 0 && ++i < argc) {
- j = atoi(argv[i]);
- /* change vlan tag */
- robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (index << 1), j);
- } else break;
- }
- } else
- if (strcasecmp(argv[i], "vlan") == 0 && (i + 1) < argc)
- {
- int index = atoi(argv[++i]);
- while (++i < argc) {
- if (strcasecmp(argv[i], "ports") == 0 && ++i < argc) {
- char *ports = argv[i];
- int untag = 0;
- int member = 0;
-
- while (*ports >= '0' && *ports <= '9') {
- j = *ports++ - '0';
- member |= 1 << j;
-
- /* untag if needed, CPU port requires special handling */
- if (*ports == 'u' || (j != 5 && (*ports == ' ' || *ports == 0)))
- {
- untag |= 1 << j;
- if (*ports) ports++;
- /* change default vlan tag */
- robo_write16(&robo, ROBO_VLAN_PAGE,
- ROBO_VLAN_PORT0_DEF_TAG + (j << 1), index);
- } else
- if (*ports == '*' || *ports == 't' || *ports == ' ') ports++;
- else break;
-
- while (*ports == ' ') ports++;
- }
-
- if (*ports) {
- fprintf(stderr, "Invalid ports '%s'.\n", argv[i]);
- exit(1);
- } else {
- /* write config now */
- val16 = (index) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */;
- if (robo5350) {
- robo_write32(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5350,
- (1 << 20) /* valid */ | (untag << 6) | member);
- robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
- } else {
- robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_WRITE,
- (1 << 14) /* valid */ | (untag << 7) | member);
- robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
- }
- }
- } else break;
- }
- } else
- if (strcasecmp(argv[i], "switch") == 0 && (i + 1) < argc)
- {
- /* enable/disable switching */
- robo_write16(&robo, ROBO_CTRL_PAGE, ROBO_SWITCH_MODE,
- (robo_read16(&robo, ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & ~2) |
- (*argv[++i] == 'e' ? 2 : 0));
- i++;
- } else
- if (strcasecmp(argv[i], "vlans") == 0 && (i + 1) < argc)
- {
- while (++i < argc) {
- if (strcasecmp(argv[i], "reset") == 0) {
- /* reset vlan validity bit */
- for (j = 0; j <= (robo5350 ? VLAN_ID_MAX5350 : VLAN_ID_MAX); j++)
- {
- /* write config now */
- val16 = (j) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */;
- if (robo5350) {
- robo_write32(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5350, 0);
- robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
- } else {
- robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_WRITE, 0);
- robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
- }
- }
- } else
- if (strcasecmp(argv[i], "enable") == 0 || strcasecmp(argv[i], "disable") == 0)
- {
- int disable = (*argv[i] == 'd') || (*argv[i] == 'D');
- /* enable/disable vlans */
- robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0, disable ? 0 :
- (1 << 7) /* 802.1Q VLAN */ | (3 << 5) /* mac check and hash */);
-
- robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_CTRL1, disable ? 0 :
- (1 << 1) | (1 << 2) | (1 << 3) /* RSV multicast */);
-
- robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_CTRL4, disable ? 0 :
- (1 << 6) /* drop invalid VID frames */);
-
- robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_CTRL5, disable ? 0 :
- (1 << 3) /* drop miss V table frames */);
-
- } else break;
- }
- } else
- if (strcasecmp(argv[i], "show") == 0)
- {
- break;
- } else {
- fprintf(stderr, "Invalid option %s\n", argv[i]);
- usage();
- exit(1);
- }
- }
-
- if (i == argc) {
- if (argc == 1) usage();
- return 0;
- }
-
- /* show config */
-
- printf("Switch: %sabled\n", robo_read16(&robo, ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & 2 ? "en" : "dis");
-
- for (i = 0; i < 6; i++) {
- printf(robo_read16(&robo, ROBO_STAT_PAGE, ROBO_LINK_STAT_SUMMARY) & (1 << port[i]) ?
- "Port %d(%c): %s%s " : "Port %d(%c): DOWN ", i, ports[i],
- robo_read16(&robo, ROBO_STAT_PAGE, ROBO_SPEED_STAT_SUMMARY) & (1 << port[i]) ? "100" : " 10",
- robo_read16(&robo, ROBO_STAT_PAGE, ROBO_DUPLEX_STAT_SUMMARY) & (1 << port[i]) ? "FD" : "HD");
-
- val16 = robo_read16(&robo, ROBO_CTRL_PAGE, port[i]);
-
- printf("%s stp: %s vlan: %d ", rxtx[val16 & 3], stp[(val16 >> 5) & 7],
- robo_read16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (i << 1)));
-
- robo_read(&robo, ROBO_STAT_PAGE, ROBO_LSA_PORT0 + port[i] * 6, mac, 3);
-
- printf("mac: %02x:%02x:%02x:%02x:%02x:%02x\n",
- mac[2] >> 8, mac[2] & 255, mac[1] >> 8, mac[1] & 255, mac[0] >> 8, mac[0] & 255);
- }
-
- val16 = robo_read16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0);
-
- printf("VLANs: %s %sabled%s%s\n",
- robo5350 ? "BCM5325/535x" : "BCM536x",
- (val16 & (1 << 7)) ? "en" : "dis",
- (val16 & (1 << 6)) ? " mac_check" : "",
- (val16 & (1 << 5)) ? " mac_hash" : "");
-
- /* scan VLANs */
- for (i = 0; i <= (robo5350 ? VLAN_ID_MAX5350 : VLAN_ID_MAX); i++) {
- /* issue read */
- val16 = (i) /* vlan */ | (0 << 12) /* read */ | (1 << 13) /* enable */;
-
- if (robo5350) {
- u32 val32;
- robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16);
- /* actual read */
- val32 = robo_read32(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_READ);
- if ((val32 & (1 << 20)) /* valid */) {
- printf("vlan%d:", i);
- for (j = 0; j < 6; j++) {
- if (val32 & (1 << j)) {
- printf(" %d%s", j, (val32 & (1 << (j + 6))) ?
- (j == 5 ? "u" : "") : "t");
- }
- }
- printf("\n");
- }
- } else {
- robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16);
- /* actual read */
- val16 = robo_read16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_READ);
- if ((val16 & (1 << 14)) /* valid */) {
- printf("vlan%d:", i);
- for (j = 0; j < 6; j++) {
- if (val16 & (1 << j)) {
- printf(" %d%s", j, (val16 & (1 << (j + 7))) ?
- (j == 5 ? "u" : "") : "t");
- }
- }
- printf("\n");
- }
- }
- }
-
- return (0);
-}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 21:32:34 +0000