diff options
Diffstat (limited to 'package/network/utils')
| -rw-r--r-- | package/network/utils/iw/patches/001-nl80211_h_sync.patch | 346 |
1 files changed, 344 insertions, 2 deletions
diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch index 4b462d3f20..394acbd0e7 100644 --- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch +++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch @@ -1,21 +1,363 @@ --- a/nl80211.h +++ b/nl80211.h -@@ -2515,6 +2515,9 @@ enum nl80211_commands { +@@ -252,9 +252,13 @@ + * DOC: SAE authentication offload + * + * By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they +- * support offloading SAE authentication for WPA3-Personal networks. In +- * %NL80211_CMD_CONNECT the password for SAE should be specified using +- * %NL80211_ATTR_SAE_PASSWORD. ++ * support offloading SAE authentication for WPA3-Personal networks in station ++ * mode. Similarly @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP flag can be set by ++ * drivers indicating the offload support in AP mode. ++ * ++ * The password for SAE should be specified using %NL80211_ATTR_SAE_PASSWORD in ++ * %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP for station and AP mode ++ * respectively. + */ + + /** +@@ -647,13 +651,9 @@ + * authentication/association or not receiving a response from the AP. + * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as + * well to remain backwards compatible. +- * When establishing a security association, drivers that support 4 way +- * handshake offload should send %NL80211_CMD_PORT_AUTHORIZED event when +- * the 4 way handshake is completed successfully. + * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself. +- * When a security association was established with the new AP (e.g. if +- * the FT protocol was used for roaming or the driver completed the 4 way +- * handshake), this event should be followed by an ++ * When a security association was established on an 802.1X network using ++ * fast transition, this event should be followed by an + * %NL80211_CMD_PORT_AUTHORIZED event. + * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify + * userspace that a connection was dropped by the AP or due to other +@@ -1067,13 +1067,11 @@ + * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously + * configured PMK for the authenticator address identified by + * %NL80211_ATTR_MAC. +- * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way +- * handshake was completed successfully by the driver. The BSSID is +- * specified with %NL80211_ATTR_MAC. Drivers that support 4 way handshake +- * offload should send this event after indicating 802.11 association with +- * %NL80211_CMD_CONNECT or %NL80211_CMD_ROAM. If the 4 way handshake failed +- * %NL80211_CMD_DISCONNECT should be indicated instead. +- * ++ * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was ++ * completed successfully. Drivers that support 4 way handshake offload ++ * should send this event after indicating 802.1X FT assocation with ++ * %NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT ++ * should be indicated instead. + * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request + * and RX notification. This command is used both as a request to transmit + * a control port frame and as a notification that a control port frame +@@ -2082,10 +2080,10 @@ enum nl80211_commands { + * operation). + * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information + * for the time while performing a channel switch. +- * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel +- * switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL). +- * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel +- * switch counters in the probe response (%NL80211_ATTR_PROBE_RESP). ++ * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel ++ * switch or color change counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL). ++ * @NL80211_ATTR_CNTDWN_OFFS_PRESP: An array of offsets (u16) to the channel ++ * switch or color change counters in the probe response (%NL80211_ATTR_PROBE_RESP). + * + * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32. + * As specified in the &enum nl80211_rxmgmt_flags. +@@ -2515,6 +2513,23 @@ enum nl80211_commands { * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from * association request when used with NL80211_CMD_NEW_STATION). * ++ * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS ++ * discovery. It is a nested attribute, see ++ * &enum nl80211_fils_discovery_attributes. ++ * ++ * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure ++ * unsolicited broadcast probe response. It is a nested attribute, see ++ * &enum nl80211_unsol_bcast_probe_resp_attributes. ++ * ++ * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from ++ * association request when used with NL80211_CMD_NEW_STATION) ++ * @NL80211_ATTR_S1G_CAPABILITY_MASK: S1G Capability Information element ++ * override mask. Used with NL80211_ATTR_S1G_CAPABILITY in ++ * NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT. ++ * + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce + * transmit power to stay within regulatory limits. u32, dBi. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use -@@ -2997,6 +3000,8 @@ enum nl80211_attrs { +@@ -2821,8 +2836,8 @@ enum nl80211_attrs { + NL80211_ATTR_CH_SWITCH_COUNT, + NL80211_ATTR_CH_SWITCH_BLOCK_TX, + NL80211_ATTR_CSA_IES, +- NL80211_ATTR_CSA_C_OFF_BEACON, +- NL80211_ATTR_CSA_C_OFF_PRESP, ++ NL80211_ATTR_CNTDWN_OFFS_BEACON, ++ NL80211_ATTR_CNTDWN_OFFS_PRESP, + + NL80211_ATTR_RXMGMT_FLAGS, + +@@ -2997,6 +3012,15 @@ enum nl80211_attrs { NL80211_ATTR_HE_6GHZ_CAPABILITY, ++ NL80211_ATTR_FILS_DISCOVERY, ++ ++ NL80211_ATTR_UNSOL_BCAST_PROBE_RESP, ++ ++ NL80211_ATTR_S1G_CAPABILITY, ++ NL80211_ATTR_S1G_CAPABILITY_MASK, ++ + NL80211_ATTR_WIPHY_ANTENNA_GAIN, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, +@@ -3009,6 +3033,8 @@ enum nl80211_attrs { + #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG + #define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER + #define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA ++#define NL80211_ATTR_CSA_C_OFF_BEACON NL80211_ATTR_CNTDWN_OFFS_BEACON ++#define NL80211_ATTR_CSA_C_OFF_PRESP NL80211_ATTR_CNTDWN_OFFS_PRESP + + /* + * Allow user space programs to use #ifdef on new attributes by defining them +@@ -3186,6 +3212,18 @@ enum nl80211_he_gi { + NL80211_RATE_INFO_HE_GI_3_2, + }; + ++/** ++ * enum nl80211_he_ltf - HE long training field ++ * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec ++ * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec ++ * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec ++ */ ++enum nl80211_he_ltf { ++ NL80211_RATE_INFO_HE_1XLTF, ++ NL80211_RATE_INFO_HE_2XLTF, ++ NL80211_RATE_INFO_HE_4XLTF, ++}; ++ + /** + * enum nl80211_he_ru_alloc - HE RU allocation values + * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation +@@ -3725,6 +3763,16 @@ enum nl80211_wmm_rule { + * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel + * in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz ++ * @NL80211_FREQUENCY_ATTR_1MHZ: 1 MHz operation is allowed ++ * on this channel in current regulatory domain. ++ * @NL80211_FREQUENCY_ATTR_2MHZ: 2 MHz operation is allowed ++ * on this channel in current regulatory domain. ++ * @NL80211_FREQUENCY_ATTR_4MHZ: 4 MHz operation is allowed ++ * on this channel in current regulatory domain. ++ * @NL80211_FREQUENCY_ATTR_8MHZ: 8 MHz operation is allowed ++ * on this channel in current regulatory domain. ++ * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed ++ * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number + * currently defined + * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use +@@ -3756,6 +3804,11 @@ enum nl80211_frequency_attr { + NL80211_FREQUENCY_ATTR_WMM, + NL80211_FREQUENCY_ATTR_NO_HE, + NL80211_FREQUENCY_ATTR_OFFSET, ++ NL80211_FREQUENCY_ATTR_1MHZ, ++ NL80211_FREQUENCY_ATTR_2MHZ, ++ NL80211_FREQUENCY_ATTR_4MHZ, ++ NL80211_FREQUENCY_ATTR_8MHZ, ++ NL80211_FREQUENCY_ATTR_16MHZ, + + /* keep last */ + __NL80211_FREQUENCY_ATTR_AFTER_LAST, +@@ -4049,6 +4102,7 @@ enum nl80211_user_reg_hint_type { + * receiving frames destined to the local BSS + * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number + * currently defined ++ * @NL80211_SURVEY_INFO_FREQUENCY_OFFSET: center frequency offset in KHz + * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use + */ + enum nl80211_survey_info { +@@ -4064,6 +4118,7 @@ enum nl80211_survey_info { + NL80211_SURVEY_INFO_TIME_SCAN, + NL80211_SURVEY_INFO_PAD, + NL80211_SURVEY_INFO_TIME_BSS_RX, ++ NL80211_SURVEY_INFO_FREQUENCY_OFFSET, + + /* keep last */ + __NL80211_SURVEY_INFO_AFTER_LAST, +@@ -4741,6 +4796,10 @@ enum nl80211_key_attributes { + * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection, + * see &struct nl80211_txrate_vht + * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi ++ * @NL80211_TXRATE_HE: HE rates allowed for TX rate selection, ++ * see &struct nl80211_txrate_he ++ * @NL80211_TXRATE_HE_GI: configure HE GI, 0.8us, 1.6us and 3.2us. ++ * @NL80211_TXRATE_HE_LTF: configure HE LTF, 1XLTF, 2XLTF and 4XLTF. + * @__NL80211_TXRATE_AFTER_LAST: internal + * @NL80211_TXRATE_MAX: highest TX rate attribute + */ +@@ -4750,6 +4809,9 @@ enum nl80211_tx_rate_attributes { + NL80211_TXRATE_HT, + NL80211_TXRATE_VHT, + NL80211_TXRATE_GI, ++ NL80211_TXRATE_HE, ++ NL80211_TXRATE_HE_GI, ++ NL80211_TXRATE_HE_LTF, + + /* keep last */ + __NL80211_TXRATE_AFTER_LAST, +@@ -4767,6 +4829,15 @@ struct nl80211_txrate_vht { + __u16 mcs[NL80211_VHT_NSS_MAX]; + }; + ++#define NL80211_HE_NSS_MAX 8 ++/** ++ * struct nl80211_txrate_he - HE MCS/NSS txrate bitmap ++ * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.) ++ */ ++struct nl80211_txrate_he { ++ __u16 mcs[NL80211_HE_NSS_MAX]; ++}; ++ + enum nl80211_txrate_gi { + NL80211_TXRATE_DEFAULT_GI, + NL80211_TXRATE_FORCE_SGI, +@@ -5821,6 +5892,15 @@ enum nl80211_feature_flags { + * handshake with PSK in AP mode (PSK is passed as part of the start AP + * command). + * ++ * @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP: Device wants to do SAE authentication ++ * in AP mode (SAE password is passed as part of the start AP command). ++ * ++ * @NL80211_EXT_FEATURE_FILS_DISCOVERY: Driver/device supports FILS discovery ++ * frames transmission ++ * ++ * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports ++ * unsolicited broadcast probe response transmission ++ * + * @NUM_NL80211_EXT_FEATURES: number of extended features. + * @MAX_NL80211_EXT_FEATURES: highest extended feature index. + */ +@@ -5878,6 +5958,9 @@ enum nl80211_ext_feature_index { + NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS, + NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION, + NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK, ++ NL80211_EXT_FEATURE_SAE_OFFLOAD_AP, ++ NL80211_EXT_FEATURE_FILS_DISCOVERY, ++ NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP, + + /* add new features before the definition below */ + NUM_NL80211_EXT_FEATURES, +@@ -5992,6 +6075,8 @@ enum nl80211_timeout_reason { + * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with + * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means + * %NL80211_ATTR_SCAN_FREQUENCIES will not be included. ++ * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for colocated APs reported by ++ * 2.4/5 GHz APs + */ + enum nl80211_scan_flags { + NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, +@@ -6008,6 +6093,7 @@ enum nl80211_scan_flags { + NL80211_SCAN_FLAG_RANDOM_SN = 1<<11, + NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12, + NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13, ++ NL80211_SCAN_FLAG_COLOCATED_6GHZ = 1<<14, + }; + + /** +@@ -6910,6 +6996,13 @@ enum nl80211_peer_measurement_ftm_resp { + * + * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset. + * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset. ++ * @NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET: the non-SRG OBSS PD maximum ++ * tx power offset. ++ * @NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP: bitmap that indicates the BSS color ++ * values used by members of the SRG. ++ * @NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP: bitmap that indicates the partial ++ * BSSID values used by members of the SRG. ++ * @NL80211_HE_OBSS_PD_ATTR_SR_CTRL: The SR Control field of SRP element. + * + * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal + * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute. +@@ -6919,6 +7012,10 @@ enum nl80211_obss_pd_attributes { + + NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET, + NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET, ++ NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET, ++ NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP, ++ NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP, ++ NL80211_HE_OBSS_PD_ATTR_SR_CTRL, + + /* keep last */ + __NL80211_HE_OBSS_PD_ATTR_LAST, +@@ -6972,4 +7069,64 @@ enum nl80211_iftype_akm_attributes { + NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1, + }; + ++/** ++ * enum nl80211_fils_discovery_attributes - FILS discovery configuration ++ * from IEEE Std 802.11ai-2016, Annex C.3 MIB detail. ++ * ++ * @__NL80211_FILS_DISCOVERY_ATTR_INVALID: Invalid ++ * ++ * @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU). ++ * Allowed range: 0..10000 (TU = Time Unit) ++ * @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU). ++ * Allowed range: 0..10000 (TU = Time Unit) ++ * @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action ++ * frame including the headers. ++ * ++ * @__NL80211_FILS_DISCOVERY_ATTR_LAST: Internal ++ * @NL80211_FILS_DISCOVERY_ATTR_MAX: highest attribute ++ */ ++enum nl80211_fils_discovery_attributes { ++ __NL80211_FILS_DISCOVERY_ATTR_INVALID, ++ ++ NL80211_FILS_DISCOVERY_ATTR_INT_MIN, ++ NL80211_FILS_DISCOVERY_ATTR_INT_MAX, ++ NL80211_FILS_DISCOVERY_ATTR_TMPL, ++ ++ /* keep last */ ++ __NL80211_FILS_DISCOVERY_ATTR_LAST, ++ NL80211_FILS_DISCOVERY_ATTR_MAX = __NL80211_FILS_DISCOVERY_ATTR_LAST - 1 ++}; ++ ++/* ++ * FILS discovery template minimum length with action frame headers and ++ * mandatory fields. ++ */ ++#define NL80211_FILS_DISCOVERY_TMPL_MIN_LEN 42 ++ ++/** ++ * enum nl80211_unsol_bcast_probe_resp_attributes - Unsolicited broadcast probe ++ * response configuration. Applicable only in 6GHz. ++ * ++ * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID: Invalid ++ * ++ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU). ++ * Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.0 ++ * 26.17.2.3.2 (AP behavior for fast passive scanning). ++ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response ++ * frame template (binary). ++ * ++ * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST: Internal ++ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX: highest attribute ++ */ ++enum nl80211_unsol_bcast_probe_resp_attributes { ++ __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID, ++ ++ NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT, ++ NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL, ++ ++ /* keep last */ ++ __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST, ++ NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX = ++ __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1 ++}; + #endif /* __LINUX_NL80211_H */ |