diff options
Diffstat (limited to 'package/network/services')
| -rw-r--r-- | package/network/services/hostapd/Makefile | 13 | ||||
| -rw-r--r-- | package/network/services/hostapd/files/hostapd.sh | 399 | ||||
| -rw-r--r-- | package/network/services/hostapd/files/wpa_supplicant.sh | 194 |
3 files changed, 0 insertions, 606 deletions
diff --git a/package/network/services/hostapd/Makefile b/package/network/services/hostapd/Makefile index 5edea1415e..5caf3e3378 100644 --- a/package/network/services/hostapd/Makefile +++ b/package/network/services/hostapd/Makefile @@ -254,12 +254,6 @@ define Package/hostapd-common CATEGORY:=Network endef -define Package/hostapd-common-old - TITLE:=hostapd/wpa_supplicant common support files (legacy drivers) - SECTION:=net - CATEGORY:=Network -endef - define Package/eapol-test TITLE:=802.1x authentication test utility SECTION:=net @@ -376,12 +370,6 @@ define Package/hostapd-common/install $(INSTALL_DATA) ./files/netifd.sh $(1)/lib/netifd/hostapd.sh endef -define Package/hostapd-common-old/install - $(INSTALL_DIR) $(1)/lib/wifi - $(INSTALL_DATA) ./files/hostapd.sh $(1)/lib/wifi/hostapd.sh - $(INSTALL_DATA) ./files/wpa_supplicant.sh $(1)/lib/wifi/wpa_supplicant.sh -endef - define Package/hostapd/install $(call Install/hostapd,$(1)) $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd $(1)/usr/sbin/ @@ -439,5 +427,4 @@ $(eval $(call BuildPackage,wpa-supplicant-p2p)) $(eval $(call BuildPackage,wpa-cli)) $(eval $(call BuildPackage,hostapd-utils)) $(eval $(call BuildPackage,hostapd-common)) -$(eval $(call BuildPackage,hostapd-common-old)) $(eval $(call BuildPackage,eapol-test)) diff --git a/package/network/services/hostapd/files/hostapd.sh b/package/network/services/hostapd/files/hostapd.sh deleted file mode 100644 index 9c1ba0fa13..0000000000 --- a/package/network/services/hostapd/files/hostapd.sh +++ /dev/null @@ -1,399 +0,0 @@ -. /lib/functions/network.sh - -hostapd_set_bss_options() { - local var="$1" - local vif="$2" - local enc wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wps_possible wpa_key_mgmt - - config_get enc "$vif" encryption "none" - config_get wep_rekey "$vif" wep_rekey # 300 - config_get wpa_group_rekey "$vif" wpa_group_rekey # 300 - config_get wpa_pair_rekey "$vif" wpa_pair_rekey # 300 - config_get wpa_master_rekey "$vif" wpa_master_rekey # 640 - config_get_bool ap_isolate "$vif" isolate 0 - config_get_bool disassoc_low_ack "$vif" disassoc_low_ack 1 - config_get max_num_sta "$vif" max_num_sta 0 - config_get max_inactivity "$vif" max_inactivity 0 - config_get_bool preamble "$vif" short_preamble 1 - - config_get device "$vif" device - config_get hwmode "$device" hwmode - config_get phy "$device" phy - - append "$var" "ctrl_interface=/var/run/hostapd-$phy" "$N" - - if [ "$ap_isolate" -gt 0 ]; then - append "$var" "ap_isolate=$ap_isolate" "$N" - fi - if [ "$max_num_sta" -gt 0 ]; then - append "$var" "max_num_sta=$max_num_sta" "$N" - fi - if [ "$max_inactivity" -gt 0 ]; then - append "$var" "ap_max_inactivity=$max_inactivity" "$N" - fi - append "$var" "disassoc_low_ack=$disassoc_low_ack" "$N" - if [ "$preamble" -gt 0 ]; then - append "$var" "preamble=$preamble" "$N" - fi - - # Examples: - # psk-mixed/tkip => WPA1+2 PSK, TKIP - # wpa-psk2/tkip+aes => WPA2 PSK, CCMP+TKIP - # wpa2/tkip+aes => WPA2 RADIUS, CCMP+TKIP - # ... - - # TODO: move this parsing function somewhere generic, so that - # later it can be reused by drivers that don't use hostapd - - # crypto defaults: WPA2 vs WPA1 - case "$enc" in - wpa2*|*psk2*) - wpa=2 - crypto="CCMP" - ;; - *mixed*) - wpa=3 - crypto="CCMP TKIP" - ;; - *) - wpa=1 - crypto="TKIP" - ;; - esac - - # explicit override for crypto setting - case "$enc" in - *tkip+aes|*tkip+ccmp|*aes+tkip|*ccmp+tkip) crypto="CCMP TKIP";; - *aes|*ccmp) crypto="CCMP";; - *tkip) crypto="TKIP";; - esac - - # enforce CCMP for 11ng and 11na - case "$hwmode:$crypto" in - *ng:TKIP|*na:TKIP) crypto="CCMP TKIP";; - esac - - # use crypto/auth settings for building the hostapd config - case "$enc" in - none) - wps_possible=1 - wpa=0 - crypto= - # Here we make the assumption that if we're in open mode - # with WPS enabled, we got to be in unconfigured state. - wps_not_configured=1 - ;; - *psk*) - config_get psk "$vif" key - if [ ${#psk} -eq 64 ]; then - append "$var" "wpa_psk=$psk" "$N" - else - append "$var" "wpa_passphrase=$psk" "$N" - fi - wps_possible=1 - [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N" - [ -n "$wpa_pair_rekey" ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey" "$N" - [ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey" "$N" - append wpa_key_mgmt "WPA-PSK" - ;; - *wpa*|*8021x*) - # required fields? formats? - # hostapd is particular, maybe a default configuration for failures - config_get auth_server "$vif" auth_server - [ -z "$auth_server" ] && config_get auth_server "$vif" server - append "$var" "auth_server_addr=$auth_server" "$N" - config_get auth_port "$vif" auth_port - [ -z "$auth_port" ] && config_get auth_port "$vif" port - auth_port=${auth_port:-1812} - append "$var" "auth_server_port=$auth_port" "$N" - config_get auth_secret "$vif" auth_secret - [ -z "$auth_secret" ] && config_get auth_secret "$vif" key - append "$var" "auth_server_shared_secret=$auth_secret" "$N" - # You don't really want to enable this unless you are doing - # some corner case testing or are using OpenWrt as a work around - # for some systematic issues. - config_get_bool auth_cache "$vif" auth_cache 0 - config_get rsn_preauth "$vif" rsn_preauth - [ "$auth_cache" -gt 0 ] || [[ "$rsn_preauth" = 1 ]] || append "$var" "disable_pmksa_caching=1" "$N" - [ "$auth_cache" -gt 0 ] || [[ "$rsn_preauth" = 1 ]] || append "$var" "okc=0" "$N" - config_get acct_server "$vif" acct_server - [ -n "$acct_server" ] && append "$var" "acct_server_addr=$acct_server" "$N" - config_get acct_port "$vif" acct_port - [ -n "$acct_port" ] && acct_port=${acct_port:-1813} - [ -n "$acct_port" ] && append "$var" "acct_server_port=$acct_port" "$N" - config_get acct_secret "$vif" acct_secret - [ -n "$acct_secret" ] && append "$var" "acct_server_shared_secret=$acct_secret" "$N" - config_get eap_reauth_period "$vif" eap_reauth_period - [ -n "$eap_reauth_period" ] && append "$var" "eap_reauth_period=$eap_reauth_period" "$N" - config_get dae_client "$vif" dae_client - config_get dae_secret "$vif" dae_secret - [ -n "$dae_client" -a -n "$dae_secret" ] && { - config_get dae_port "$vif" dae_port - append "$var" "radius_das_port=${dae_port:-3799}" "$N" - append "$var" "radius_das_client=$dae_client $dae_secret" "$N" - } - config_get ownip "$vif" ownip - append "$var" "own_ip_addr=$ownip" "$N" - append "$var" "eapol_key_index_workaround=1" "$N" - append "$var" "ieee8021x=1" "$N" - append wpa_key_mgmt "WPA-EAP" - [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N" - [ -n "$wpa_pair_rekey" ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey" "$N" - [ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey" "$N" - ;; - *wep*) - config_get key "$vif" key - key="${key:-1}" - case "$key" in - [1234]) - for idx in 1 2 3 4; do - local zidx - zidx=$(($idx - 1)) - config_get ckey "$vif" "key${idx}" - [ -n "$ckey" ] && \ - append "$var" "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N" - done - append "$var" "wep_default_key=$((key - 1))" "$N" - ;; - *) - append "$var" "wep_key0=$(prepare_key_wep "$key")" "$N" - append "$var" "wep_default_key=0" "$N" - [ -n "$wep_rekey" ] && append "$var" "wep_rekey_period=$wep_rekey" "$N" - ;; - esac - case "$enc" in - *shared*) - auth_algs=2 - ;; - *mixed*) - auth_algs=3 - ;; - esac - wpa=0 - crypto= - ;; - *) - wpa=0 - crypto= - ;; - esac - append "$var" "auth_algs=${auth_algs:-1}" "$N" - append "$var" "wpa=$wpa" "$N" - [ -n "$crypto" ] && append "$var" "wpa_pairwise=$crypto" "$N" - [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N" - - config_get ssid "$vif" ssid - config_get bridge "$vif" bridge - config_get ieee80211d "$vif" ieee80211d - config_get iapp_interface "$vif" iapp_interface - - config_get_bool wps_pbc "$vif" wps_pushbutton 0 - config_get_bool wps_label "$vif" wps_label 0 - - config_get config_methods "$vif" wps_config - [ "$wps_pbc" -gt 0 ] && append config_methods push_button - - [ -n "$wps_possible" -a -n "$config_methods" ] && { - config_get device_type "$vif" wps_device_type "6-0050F204-1" - config_get device_name "$vif" wps_device_name "Lede AP" - config_get manufacturer "$vif" wps_manufacturer "www.lede-project.org" - config_get wps_pin "$vif" wps_pin - - config_get_bool ext_registrar "$vif" ext_registrar 0 - [ "$ext_registrar" -gt 0 -a -n "$bridge" ] && append "$var" "upnp_iface=$bridge" "$N" - - append "$var" "eap_server=1" "$N" - [ -n "$wps_pin" ] && append "$var" "ap_pin=$wps_pin" "$N" - append "$var" "wps_state=${wps_not_configured:-2}" "$N" - append "$var" "ap_setup_locked=0" "$N" - append "$var" "device_type=$device_type" "$N" - append "$var" "device_name=$device_name" "$N" - append "$var" "manufacturer=$manufacturer" "$N" - append "$var" "config_methods=$config_methods" "$N" - } - - append "$var" "ssid=$ssid" "$N" - [ -n "$bridge" ] && append "$var" "bridge=$bridge" "$N" - [ -n "$ieee80211d" ] && append "$var" "ieee80211d=$ieee80211d" "$N" - [ -n "$iapp_interface" ] && { - local ifname - network_get_device ifname "$iapp_interface" || ifname = "$iapp_interface" - append bss_conf "iapp_interface=$ifname" "$N" - } - - if [ "$wpa" -ge "1" ] - then - config_get nasid "$vif" nasid - [ -n "$nasid" ] && append "$var" "nas_identifier=$nasid" "$N" - - config_get_bool ieee80211r "$vif" ieee80211r 0 - if [ "$ieee80211r" -gt 0 ] - then - config_get mobility_domain "$vif" mobility_domain "4f57" - config_get r0_key_lifetime "$vif" r0_key_lifetime "10000" - config_get r1_key_holder "$vif" r1_key_holder "00004f577274" - config_get reassociation_deadline "$vif" reassociation_deadline "1000" - config_get r0kh "$vif" r0kh - config_get r1kh "$vif" r1kh - config_get_bool pmk_r1_push "$vif" pmk_r1_push 0 - - append "$var" "mobility_domain=$mobility_domain" "$N" - append "$var" "r0_key_lifetime=$r0_key_lifetime" "$N" - append "$var" "r1_key_holder=$r1_key_holder" "$N" - append "$var" "reassociation_deadline=$reassociation_deadline" "$N" - append "$var" "pmk_r1_push=$pmk_r1_push" "$N" - - for kh in $r0kh; do - "$var" "r0kh=${kh//,/ }" "$N" - done - for kh in $r1kh; do - "$var" "r1kh=${kh//,/ }" "$N" - done - - [ "$wpa_key_mgmt" != "${wpa_key_mgmt/EAP/}" ] && append wpa_key_mgmt "FT-EAP" - [ "$wpa_key_mgmt" != "${wpa_key_mgmt/PSK/}" ] && append wpa_key_mgmt "FT-PSK" - fi - - [ -n "wpa_key_mgmt" ] && append "$var" "wpa_key_mgmt=$wpa_key_mgmt" - fi - - if [ "$wpa" -ge "2" ] - then - # RSN -> allow preauthentication. You have two - # options, rsn_preauth for production or rsn_preauth_testing - # for validation / testing. - if [ -n "$bridge" -a "$rsn_preauth" = 1 ] - then - append "$var" "rsn_preauth=1" "$N" - append "$var" "rsn_preauth_interfaces=$bridge" "$N" - append "$var" "okc=1" "$N" - else - # RSN preauthentication testings hould disable - # Opportunistic Key Caching (okc) as otherwise the PMKSA - # entry for a test could come from the Opportunistic Key Caching - config_get rsn_preauth_testing "$vif" rsn_preauth_testing - if [ -n "$bridge" -a "$rsn_preauth_testing" = 1 ] - then - append "$var" "rsn_preauth=1" "$N" - append "$var" "rsn_preauth_interfaces=$bridge" "$N" - append "$var" "okc=0" "$N" - fi - fi - - # RSN -> allow management frame protection - config_get ieee80211w "$vif" ieee80211w - case "$ieee80211w" in - [012]) - append "$var" "ieee80211w=$ieee80211w" "$N" - [ "$ieee80211w" -gt "0" ] && { - config_get ieee80211w_max_timeout "$vif" ieee80211w_max_timeout - config_get ieee80211w_retry_timeout "$vif" ieee80211w_retry_timeout - [ -n "$ieee80211w_max_timeout" ] && \ - append "$var" "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N" - [ -n "$ieee80211w_retry_timeout" ] && \ - append "$var" "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N" - } - ;; - esac - fi - - config_get macfile "$vif" macfile - config_get maclist "$vif" maclist - if [ -z "$macfile" ] - then - # if no macfile has been specified, fallback to the default name - # and truncate file to avoid aggregating entries over time - macfile="/var/run/hostapd-$ifname.maclist" - echo "" > "$macfile" - else - if [ -n "$maclist" ] - then - # to avoid to overwrite the original file, make a copy - # before appending the entries specified by the maclist - # option - cp $macfile $macfile.maclist - macfile=$macfile.maclist - fi - fi - - if [ -n "$maclist" ] - then - for mac in $maclist; do - echo "$mac" >> $macfile - done - fi - - config_get macfilter "$vif" macfilter - case "$macfilter" in - allow) - append "$var" "macaddr_acl=1" "$N" - append "$var" "accept_mac_file=$macfile" "$N" - ;; - deny) - append "$var" "macaddr_acl=0" "$N" - append "$var" "deny_mac_file=$macfile" "$N" - ;; - esac -} - -hostapd_set_log_options() { - local var="$1" - local cfg="$2" - local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme - - config_get log_level "$cfg" log_level 2 - - config_get_bool log_80211 "$cfg" log_80211 1 - config_get_bool log_8021x "$cfg" log_8021x 1 - config_get_bool log_radius "$cfg" log_radius 1 - config_get_bool log_wpa "$cfg" log_wpa 1 - config_get_bool log_driver "$cfg" log_driver 1 - config_get_bool log_iapp "$cfg" log_iapp 1 - config_get_bool log_mlme "$cfg" log_mlme 1 - - local log_mask=$(( \ - ($log_80211 << 0) | \ - ($log_8021x << 1) | \ - ($log_radius << 2) | \ - ($log_wpa << 3) | \ - ($log_driver << 4) | \ - ($log_iapp << 5) | \ - ($log_mlme << 6) \ - )) - - append "$var" "logger_syslog=$log_mask" "$N" - append "$var" "logger_syslog_level=$log_level" "$N" - append "$var" "logger_stdout=$log_mask" "$N" - append "$var" "logger_stdout_level=$log_level" "$N" -} - -hostapd_setup_vif() { - local vif="$1" - local driver="$2" - local ifname device channel hwmode - - hostapd_cfg= - - config_get ifname "$vif" ifname - config_get device "$vif" device - config_get channel "$device" channel - config_get hwmode "$device" hwmode - - hostapd_set_log_options hostapd_cfg "$device" - hostapd_set_bss_options hostapd_cfg "$vif" - - case "$hwmode" in - *bg|*gdt|*gst|*fh) hwmode=g;; - *adt|*ast) hwmode=a;; - esac - [ "$channel" = auto ] && channel= - [ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device" - cat > /var/run/hostapd-$ifname.conf <<EOF -driver=$driver -interface=$ifname -${hwmode:+hw_mode=${hwmode#11}} -${channel:+channel=$channel} -$hostapd_cfg -EOF - hostapd -P /var/run/wifi-$ifname.pid -B /var/run/hostapd-$ifname.conf -} diff --git a/package/network/services/hostapd/files/wpa_supplicant.sh b/package/network/services/hostapd/files/wpa_supplicant.sh deleted file mode 100644 index b6784843e8..0000000000 --- a/package/network/services/hostapd/files/wpa_supplicant.sh +++ /dev/null @@ -1,194 +0,0 @@ -wpa_supplicant_setup_vif() { - local vif="$1" - local driver="$2" - local key="$key" - local options="$3" - local freq="" - local ht="$5" - local ap_scan="" - local scan_ssid="1" - [ -n "$4" ] && freq="frequency=$4" - - config_get enc "$vif" encryption - config_get key "$vif" key - - local net_cfg bridge - config_get bridge "$vif" bridge - [ -z "$bridge" ] && { - net_cfg="$(find_net_config "$vif")" - [ -z "$net_cfg" ] || bridge="$(bridge_interface "$net_cfg")" - config_set "$vif" bridge "$bridge" - } - - local mode ifname wds modestr="" - config_get mode "$vif" mode - config_get ifname "$vif" ifname - config_get_bool wds "$vif" wds 0 - [ -z "$bridge" ] || [ "$mode" = ap ] || [ "$mode" = sta -a $wds -eq 1 ] || { - echo "wpa_supplicant_setup_vif($ifname): Refusing to bridge $mode mode interface" - return 1 - } - [ "$mode" = "adhoc" ] && { - modestr="mode=1" - scan_ssid="0" - ap_scan="ap_scan=2" - } - - key_mgmt='NONE' - case "$enc" in - *none*) ;; - *wep*) - config_get key "$vif" key - key="${key:-1}" - case "$key" in - [1234]) - for idx in 1 2 3 4; do - local zidx - zidx=$(($idx - 1)) - config_get ckey "$vif" "key${idx}" - [ -n "$ckey" ] && \ - append "wep_key${zidx}" "wep_key${zidx}=$(prepare_key_wep "$ckey")" - done - wep_tx_keyidx="wep_tx_keyidx=$((key - 1))" - ;; - *) - wep_key0="wep_key0=$(prepare_key_wep "$key")" - wep_tx_keyidx="wep_tx_keyidx=0" - ;; - esac - ;; - *psk*) - key_mgmt='WPA-PSK' - # if you want to use PSK with a non-nl80211 driver you - # have to use WPA-NONE and wext driver for wpa_s - [ "$mode" = "adhoc" -a "$driver" != "nl80211" ] && { - key_mgmt='WPA-NONE' - driver='wext' - } - if [ ${#key} -eq 64 ]; then - passphrase="psk=${key}" - else - passphrase="psk=\"${key}\"" - fi - case "$enc" in - *psk2*) - proto='proto=RSN' - config_get ieee80211w "$vif" ieee80211w - ;; - *psk*) - proto='proto=WPA' - ;; - esac - ;; - *wpa*|*8021x*) - proto='proto=WPA2' - key_mgmt='WPA-EAP' - config_get ieee80211w "$vif" ieee80211w - config_get ca_cert "$vif" ca_cert - config_get eap_type "$vif" eap_type - ca_cert=${ca_cert:+"ca_cert=\"$ca_cert\""} - case "$eap_type" in - tls) - pairwise='pairwise=CCMP' - group='group=CCMP' - config_get identity "$vif" identity - config_get client_cert "$vif" client_cert - config_get priv_key "$vif" priv_key - config_get priv_key_pwd "$vif" priv_key_pwd - identity="identity=\"$identity\"" - client_cert="client_cert=\"$client_cert\"" - priv_key="private_key=\"$priv_key\"" - priv_key_pwd="private_key_passwd=\"$priv_key_pwd\"" - ;; - peap|ttls) - config_get auth "$vif" auth - config_get identity "$vif" identity - config_get password "$vif" password - phase2="phase2=\"auth=${auth:-MSCHAPV2}\"" - identity="identity=\"$identity\"" - password="${password:+password=\"$password\"}" - ;; - esac - eap_type="eap=$(echo $eap_type | tr 'a-z' 'A-Z')" - ;; - esac - - case "$ieee80211w" in - [012]) - ieee80211w="ieee80211w=$ieee80211w" - ;; - esac - - local fixed_freq bssid1 beacon_int brates mrate - config_get ifname "$vif" ifname - config_get bridge "$vif" bridge - config_get ssid "$vif" ssid - config_get bssid "$vif" bssid - bssid1=${bssid:+"bssid=$bssid"} - beacon_int=${beacon_int:+"beacon_int=$beacon_int"} - - local br brval brsub brstr - [ -n "$basic_rate_list" ] && { - for br in $basic_rate_list; do - brval="$(($br / 1000))" - brsub="$((($br / 100) % 10))" - [ "$brsub" -gt 0 ] && brval="$brval.$brsub" - [ -n "$brstr" ] && brstr="$brstr," - brstr="$brstr$brval" - done - brates=${basic_rate_list:+"rates=$brstr"} - } - - local mcval="" - [ -n "$mcast_rate" ] && { - mcval="$(($mcast_rate / 1000))" - mcsub="$(( ($mcast_rate / 100) % 10 ))" - [ "$mcsub" -gt 0 ] && mcval="$mcval.$mcsub" - mrate=${mcast_rate:+"mcast_rate=$mcval"} - } - - local ht_str - [ -n "$ht" ] && ht_str="htmode=$ht" - - rm -rf /var/run/wpa_supplicant-$ifname - cat > /var/run/wpa_supplicant-$ifname.conf <<EOF -ctrl_interface=/var/run/wpa_supplicant-$ifname -$ap_scan -network={ - $modestr - scan_ssid=$scan_ssid - ssid="$ssid" - $bssid1 - key_mgmt=$key_mgmt - $proto - $freq - ${fixed:+"fixed_freq=1"} - $beacon_int - $brates - $mrate - $ht_str - $ieee80211w - $passphrase - $pairwise - $group - $eap_type - $ca_cert - $client_cert - $priv_key - $priv_key_pwd - $phase2 - $identity - $password - $wep_key0 - $wep_key1 - $wep_key2 - $wep_key3 - $wep_tx_keyidx -} -EOF - if [ -n "$proto" -o "$key_mgmt" = "NONE" ]; then - wpa_supplicant ${bridge:+ -b $bridge} -B -P "/var/run/wifi-${ifname}.pid" -D ${driver:-wext} -i "$ifname" -c /var/run/wpa_supplicant-$ifname.conf $options - else - return 0 - fi -} |