diff options
Diffstat (limited to 'package/network/services/hostapd/patches/020-mesh-make-forwarding-configurable.patch')
| -rw-r--r-- | package/network/services/hostapd/patches/020-mesh-make-forwarding-configurable.patch | 219 |
1 files changed, 0 insertions, 219 deletions
diff --git a/package/network/services/hostapd/patches/020-mesh-make-forwarding-configurable.patch b/package/network/services/hostapd/patches/020-mesh-make-forwarding-configurable.patch deleted file mode 100644 index 75726a6750..0000000000 --- a/package/network/services/hostapd/patches/020-mesh-make-forwarding-configurable.patch +++ /dev/null @@ -1,219 +0,0 @@ -From 90fe6429624fc48bc0e5d2d7eeecb7498708b5e3 Mon Sep 17 00:00:00 2001 -From: Daniel Golle <daniel@makrotopia.org> -Date: Wed, 18 Apr 2018 19:24:31 +0200 -Subject: [PATCH 18/18] mesh: make forwarding configurable - -Allow mesh_fwding to be specified in a mesh bss config, pass that -to the driver (only nl80211 implemented for now) and announce -forwarding capability accordingly. - -Signed-off-by: Daniel Golle <daniel@makrotopia.org> ---- - src/ap/ap_config.h | 2 ++ - src/drivers/driver.h | 2 ++ - src/drivers/driver_nl80211.c | 3 +++ - wpa_supplicant/config.c | 4 ++++ - wpa_supplicant/config.h | 9 +++++++++ - wpa_supplicant/config_file.c | 4 ++++ - wpa_supplicant/config_ssid.h | 5 +++++ - wpa_supplicant/mesh.c | 6 ++++++ - wpa_supplicant/mesh_mpm.c | 4 ++-- - wpa_supplicant/wpa_supplicant.conf | 3 +++ - 10 files changed, 40 insertions(+), 2 deletions(-) - ---- a/src/ap/ap_config.h -+++ b/src/ap/ap_config.h -@@ -51,6 +51,7 @@ struct mesh_conf { - int dot11MeshRetryTimeout; /* msec */ - int dot11MeshConfirmTimeout; /* msec */ - int dot11MeshHoldingTimeout; /* msec */ -+ int mesh_fwding; - }; - - #define MAX_STA_COUNT 2007 -@@ -696,6 +697,7 @@ struct hostapd_bss_config { - - #define MESH_ENABLED BIT(0) - int mesh; -+ int mesh_fwding; - - u8 radio_measurements[RRM_CAPABILITIES_IE_LEN]; - ---- a/src/drivers/driver.h -+++ b/src/drivers/driver.h -@@ -1584,6 +1584,7 @@ struct wpa_driver_mesh_bss_params { - #define WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS 0x00000004 - #define WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE 0x00000008 - #define WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD 0x00000010 -+#define WPA_DRIVER_MESH_CONF_FLAG_FORWARDING 0x00000020 - /* - * TODO: Other mesh configuration parameters would go here. - * See NL80211_MESHCONF_* for all the mesh config parameters. -@@ -1593,6 +1594,7 @@ struct wpa_driver_mesh_bss_params { - int peer_link_timeout; - int max_peer_links; - int rssi_threshold; -+ int forwarding; - u16 ht_opmode; - }; - ---- a/src/drivers/driver_nl80211.c -+++ b/src/drivers/driver_nl80211.c -@@ -10456,6 +10456,9 @@ static int nl80211_put_mesh_config(struc - if (((params->flags & WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS) && - nla_put_u8(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS, - params->auto_plinks)) || -+ ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_FORWARDING) && -+ nla_put_u8(msg, NL80211_MESHCONF_FORWARDING, -+ params->forwarding)) || - ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS) && - nla_put_u16(msg, NL80211_MESHCONF_MAX_PEER_LINKS, - params->max_peer_links)) || ---- a/wpa_supplicant/config.c -+++ b/wpa_supplicant/config.c -@@ -2527,6 +2527,7 @@ static const struct parse_data ssid_fiel - #ifdef CONFIG_MESH - { INT_RANGE(mode, 0, 5) }, - { INT_RANGE(no_auto_peer, 0, 1) }, -+ { INT_RANGE(mesh_fwding, 0, 1) }, - { INT_RANGE(mesh_rssi_threshold, -255, 1) }, - #else /* CONFIG_MESH */ - { INT_RANGE(mode, 0, 4) }, -@@ -3106,6 +3107,7 @@ void wpa_config_set_network_defaults(str - ssid->dot11MeshRetryTimeout = DEFAULT_MESH_RETRY_TIMEOUT; - ssid->dot11MeshConfirmTimeout = DEFAULT_MESH_CONFIRM_TIMEOUT; - ssid->dot11MeshHoldingTimeout = DEFAULT_MESH_HOLDING_TIMEOUT; -+ ssid->mesh_fwding = DEFAULT_MESH_FWDING; - ssid->mesh_rssi_threshold = DEFAULT_MESH_RSSI_THRESHOLD; - #endif /* CONFIG_MESH */ - #ifdef CONFIG_HT_OVERRIDES -@@ -4347,6 +4349,7 @@ struct wpa_config * wpa_config_alloc_emp - config->user_mpm = DEFAULT_USER_MPM; - config->max_peer_links = DEFAULT_MAX_PEER_LINKS; - config->mesh_max_inactivity = DEFAULT_MESH_MAX_INACTIVITY; -+ config->mesh_fwding = DEFAULT_MESH_FWDING; - config->dot11RSNASAERetransPeriod = - DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD; - config->fast_reauth = DEFAULT_FAST_REAUTH; -@@ -5047,6 +5050,7 @@ static const struct global_parse_data gl - { INT(user_mpm), 0 }, - { INT_RANGE(max_peer_links, 0, 255), 0 }, - { INT(mesh_max_inactivity), 0 }, -+ { INT_RANGE(mesh_fwding, 0, 1), 0 }, - { INT(dot11RSNASAERetransPeriod), 0 }, - #endif /* CONFIG_MESH */ - { INT(disable_scan_offload), 0 }, ---- a/wpa_supplicant/config.h -+++ b/wpa_supplicant/config.h -@@ -18,6 +18,7 @@ - #define DEFAULT_USER_MPM 1 - #define DEFAULT_MAX_PEER_LINKS 99 - #define DEFAULT_MESH_MAX_INACTIVITY 300 -+#define DEFAULT_MESH_FWDING 1 - /* - * The default dot11RSNASAERetransPeriod is defined as 40 ms in the standard, - * but use 1000 ms in practice to avoid issues on low power CPUs. -@@ -1378,6 +1379,14 @@ struct wpa_config { - int mesh_max_inactivity; - - /** -+ * mesh_fwding - Mesh network layer-2 forwarding -+ * -+ * This controls whether to enable layer-2 forwarding. -+ * By default: 1: enabled -+ */ -+ int mesh_fwding; -+ -+ /** - * dot11RSNASAERetransPeriod - Timeout to retransmit SAE Auth frame - * - * This timeout value is used in mesh STA to retransmit ---- a/wpa_supplicant/config_file.c -+++ b/wpa_supplicant/config_file.c -@@ -768,6 +768,7 @@ static void wpa_config_write_network(FIL - #endif /* IEEE8021X_EAPOL */ - INT(mode); - INT(no_auto_peer); -+ INT(mesh_fwding); - INT(frequency); - INT(enable_edmg); - INT(edmg_channel); -@@ -1449,6 +1450,9 @@ static void wpa_config_write_global(FILE - fprintf(f, "mesh_max_inactivity=%d\n", - config->mesh_max_inactivity); - -+ if (config->mesh_fwding != DEFAULT_MESH_FWDING) -+ fprintf(f, "mesh_fwding=%d\n", config->mesh_fwding); -+ - if (config->dot11RSNASAERetransPeriod != - DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD) - fprintf(f, "dot11RSNASAERetransPeriod=%d\n", ---- a/wpa_supplicant/config_ssid.h -+++ b/wpa_supplicant/config_ssid.h -@@ -546,6 +546,11 @@ struct wpa_ssid { - int dot11MeshConfirmTimeout; /* msec */ - int dot11MeshHoldingTimeout; /* msec */ - -+ /** -+ * Mesh network layer-2 forwarding -+ */ -+ int mesh_fwding; -+ - int ht; - int ht40; - ---- a/wpa_supplicant/mesh.c -+++ b/wpa_supplicant/mesh.c -@@ -140,6 +140,7 @@ static struct mesh_conf * mesh_config_cr - conf->mesh_cc_id = 0; - conf->mesh_sp_id = MESH_SYNC_METHOD_NEIGHBOR_OFFSET; - conf->mesh_auth_id = (conf->security & MESH_CONF_SEC_AUTH) ? 1 : 0; -+ conf->mesh_fwding = ssid->mesh_fwding; - conf->dot11MeshMaxRetries = ssid->dot11MeshMaxRetries; - conf->dot11MeshRetryTimeout = ssid->dot11MeshRetryTimeout; - conf->dot11MeshConfirmTimeout = ssid->dot11MeshConfirmTimeout; -@@ -441,6 +442,7 @@ static int wpa_supplicant_mesh_init(stru - bss->conf->start_disabled = 1; - bss->conf->mesh = MESH_ENABLED; - bss->conf->ap_max_inactivity = wpa_s->conf->mesh_max_inactivity; -+ bss->conf->mesh_fwding = wpa_s->conf->mesh_fwding; - - if (ieee80211_is_dfs(ssid->frequency, wpa_s->hw.modes, - wpa_s->hw.num_modes) && wpa_s->conf->country[0]) { -@@ -655,6 +657,10 @@ int wpa_supplicant_join_mesh(struct wpa_ - } - params->conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity; - -+ /* always explicitely set forwarding to on or off for now */ -+ params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_FORWARDING; -+ params->conf.forwarding = ssid->mesh_fwding; -+ - os_free(wpa_s->mesh_params); - wpa_s->mesh_params = params; - if (wpa_supplicant_mesh_init(wpa_s, ssid, ¶ms->freq)) { ---- a/wpa_supplicant/mesh_mpm.c -+++ b/wpa_supplicant/mesh_mpm.c -@@ -303,9 +303,9 @@ static void mesh_mpm_send_plink_action(s - info = (bss->num_plinks > 63 ? 63 : bss->num_plinks) << 1; - /* TODO: Add Connected to Mesh Gate/AS subfields */ - wpabuf_put_u8(buf, info); -- /* always forwarding & accepting plinks for now */ -+ /* set forwarding & always accepting plinks for now */ - wpabuf_put_u8(buf, MESH_CAP_ACCEPT_ADDITIONAL_PEER | -- MESH_CAP_FORWARDING); -+ (conf->mesh_fwding ? MESH_CAP_FORWARDING : 0)); - } else { /* Peer closing frame */ - /* IE: Mesh ID */ - wpabuf_put_u8(buf, WLAN_EID_MESH_ID); ---- a/wpa_supplicant/wpa_supplicant.conf -+++ b/wpa_supplicant/wpa_supplicant.conf -@@ -150,6 +150,9 @@ ap_scan=1 - # This timeout value is used in mesh STA to clean up inactive stations. - #mesh_max_inactivity=300 - -+# Enable 802.11s layer-2 routing and forwarding -+#mesh_fwding=1 -+ - # cert_in_cb - Whether to include a peer certificate dump in events - # This controls whether peer certificates for authentication server and - # its certificate chain are included in EAP peer certificate events. This is |