diff options
Diffstat (limited to 'package/network/services/hostapd/madwifi')
5 files changed, 0 insertions, 2453 deletions
diff --git a/package/network/services/hostapd/madwifi/include/compat.h b/package/network/services/hostapd/madwifi/include/compat.h deleted file mode 100644 index 09e63974fa..0000000000 --- a/package/network/services/hostapd/madwifi/include/compat.h +++ /dev/null @@ -1,209 +0,0 @@ -/*- - * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any - * redistribution must be conditioned upon including a substantially - * similar Disclaimer requirement for further binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY - * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL - * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, - * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER - * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - * THE POSSIBILITY OF SUCH DAMAGES. - * - * $Id: compat.h 3310 2008-01-30 20:23:49Z mentor $ - */ -#ifndef _ATH_COMPAT_H_ -#define _ATH_COMPAT_H_ - -/* Compatibility with older Linux kernels */ -#ifdef __KERNEL__ -#include <linux/types.h> -#include <linux/time.h> -#include <linux/netdevice.h> -#endif - -#if !defined(__KERNEL__) || !defined (__bitwise) -#define __le16 u_int16_t -#define __le32 u_int32_t -#define __le64 u_int64_t -#define __be16 u_int16_t -#define __be32 u_int32_t -#define __be64 u_int64_t -#define __force -#endif - -#ifndef container_of -#define container_of(ptr, type, member) ({ \ - const typeof( ((type *)0)->member ) *__mptr = (ptr); \ - (type *)( (char *)__mptr - offsetof(type,member) );}) -#endif - -#ifndef list_for_each_entry_reverse -#define list_for_each_entry_reverse(pos, head, member) \ - for (pos = list_entry((head)->prev, typeof(*pos), member); \ - prefetch(pos->member.prev), &pos->member != (head); \ - pos = list_entry(pos->member.prev, typeof(*pos), member)) -#endif - -#ifndef NETDEV_TX_OK -#define NETDEV_TX_OK 0 -#define NETDEV_TX_BUSY 1 -#endif - -/* - * BSD/Linux compatibility shims. These are used mainly to - * minimize differences when importing necesary BSD code. - */ -#define NBBY 8 /* number of bits/byte */ - -/* roundup() appears in Linux 2.6.18 */ -#include <linux/kernel.h> -#ifndef roundup -#define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) /* to any y */ -#endif - -#define howmany(x, y) (((x)+((y)-1))/(y)) - -/* Bit map related macros. */ -#define setbit(a,i) ((a)[(i)/NBBY] |= 1<<((i)%NBBY)) -#define clrbit(a,i) ((a)[(i)/NBBY] &= ~(1<<((i)%NBBY))) -#define isset(a,i) ((a)[(i)/NBBY] & (1<<((i)%NBBY))) -#define isclr(a,i) (((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0) - -#ifndef __packed -#define __packed __attribute__((__packed__)) -#endif - -#define __offsetof(t,m) offsetof(t,m) - -#ifndef ALIGNED_POINTER -/* - * ALIGNED_POINTER is a boolean macro that checks whether an address - * is valid to fetch data elements of type t from on this architecture. - * This does not reflect the optimal alignment, just the possibility - * (within reasonable limits). - * - */ -#define ALIGNED_POINTER(p,t) 1 -#endif - -#ifdef __KERNEL__ -#define KASSERT(exp, msg) do { \ - if (unlikely(!(exp))) { \ - printk msg; \ - BUG(); \ - } \ -} while (0) -#endif /* __KERNEL__ */ - -/* - * NetBSD/FreeBSD defines for file version. - */ -#define __FBSDID(_s) -#define __KERNEL_RCSID(_n,_s) - -/* - * Fixes for Linux API changes - */ -#ifdef __KERNEL__ - -#include <linux/version.h> - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38) -#define AUTOCONF_INCLUDED 1 -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21) -#define ATH_REGISTER_SYSCTL_TABLE(t) register_sysctl_table(t, 1) -#else -#define ATH_REGISTER_SYSCTL_TABLE(t) register_sysctl_table(t) -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9) -#define __user -#define __kernel -#define __iomem -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) -typedef int gfp_t; -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16) -static inline int timeval_compare(struct timeval *lhs, struct timeval *rhs) -{ - if (lhs->tv_sec < rhs->tv_sec) - return -1; - if (lhs->tv_sec > rhs->tv_sec) - return 1; - return lhs->tv_usec - rhs->tv_usec; -} -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) -#define IRQF_SHARED SA_SHIRQ -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27) -#define netdev_priv(_netdev) ((_netdev)->priv) -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) -#define skb_end_pointer(_skb) ((_skb)->end) -#define skb_tail_pointer(_skb) ((_skb)->tail) -#define skb_set_network_header(_skb, _offset) \ - do { (_skb)->nh.raw = (_skb)->data + (_offset); } while(0) -#define skb_reset_network_header(_skb) \ - do { (_skb)->nh.raw = (_skb)->data; } while(0) -#define skb_mac_header(_skb) ((_skb)->mac.raw) -#define skb_reset_mac_header(_skb) \ - do { (_skb)->mac.raw = (_skb)->data; } while(0) -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) -#define CTL_AUTO -2 -#define DEV_ATH 9 -#else -#define CTL_AUTO CTL_UNNUMBERED -#define DEV_ATH CTL_UNNUMBERED -#endif - -/* __skb_append got a third parameter in 2.6.14 */ -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) -#define __skb_queue_after(_list, _old, _new) __skb_append(_old, _new) -#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25) -#define __skb_queue_after(_list, _old, _new) __skb_append(_old, _new, _list) -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,33) -#define CTLNAME(x) .ctl_name = x, -#else -#define CTLNAME(x) -#endif - -#endif /* __KERNEL__ */ - -#endif /* _ATH_COMPAT_H_ */ diff --git a/package/network/services/hostapd/madwifi/net80211/_ieee80211.h b/package/network/services/hostapd/madwifi/net80211/_ieee80211.h deleted file mode 100644 index 2d2a06f23d..0000000000 --- a/package/network/services/hostapd/madwifi/net80211/_ieee80211.h +++ /dev/null @@ -1,325 +0,0 @@ -/*- - * Copyright (c) 2001 Atsushi Onoe - * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * $Id: _ieee80211.h 3207 2008-01-18 21:25:05Z mtaylor $ - */ -#ifndef _NET80211__IEEE80211_H_ -#define _NET80211__IEEE80211_H_ - -enum ieee80211_phytype { - IEEE80211_T_DS, /* direct sequence spread spectrum */ - IEEE80211_T_FH, /* frequency hopping */ - IEEE80211_T_OFDM, /* frequency division multiplexing */ - IEEE80211_T_TURBO, /* high rate OFDM, aka turbo mode */ -}; -#define IEEE80211_T_CCK IEEE80211_T_DS /* more common nomenclature */ - -/* XXX: not really a mode; there are really multiple PHYs */ -enum ieee80211_phymode { - IEEE80211_MODE_AUTO = 0, /* autoselect */ - IEEE80211_MODE_11A = 1, /* 5GHz, OFDM */ - IEEE80211_MODE_11B = 2, /* 2GHz, CCK */ - IEEE80211_MODE_11G = 3, /* 2GHz, OFDM */ - IEEE80211_MODE_FH = 4, /* 2GHz, GFSK */ - IEEE80211_MODE_TURBO_A = 5, /* 5GHz, OFDM, 2x clock dynamic turbo */ - IEEE80211_MODE_TURBO_G = 6, /* 2GHz, OFDM, 2x clock dynamic turbo*/ -}; -#define IEEE80211_MODE_MAX (IEEE80211_MODE_TURBO_G+1) - -enum ieee80211_opmode { - IEEE80211_M_STA = 1, /* infrastructure station */ - IEEE80211_M_IBSS = 0, /* IBSS (adhoc) station */ - IEEE80211_M_AHDEMO = 3, /* Old lucent compatible adhoc demo */ - IEEE80211_M_HOSTAP = 6, /* Software Access Point */ - IEEE80211_M_MONITOR = 8, /* Monitor mode */ - IEEE80211_M_WDS = 2 /* WDS link */ -}; - -/* - * True if this mode will send beacon on a regular interval, like AP - * or IBSS - */ -#define IEEE80211_IS_MODE_BEACON(_opmode) \ - ((_opmode == IEEE80211_M_IBSS) || \ - (_opmode == IEEE80211_M_HOSTAP)) - -/* - * True if this mode must behave like a DFS master, ie do Channel - * Check Availability and In Service Monitoring. We need to make sure - * that all modes cannot send data without being authorized. Such - * enforcement is not done in monitor mode however. - */ - -#define IEEE80211_IS_MODE_DFS_MASTER(_opmode) \ - ((_opmode == IEEE80211_M_IBSS) || \ - (_opmode == IEEE80211_M_AHDEMO) || \ - (_opmode == IEEE80211_M_HOSTAP) || \ - (_opmode == IEEE80211_M_WDS)) - -/* - * 802.11g protection mode. - */ -enum ieee80211_protmode { - IEEE80211_PROT_NONE = 0, /* no protection */ - IEEE80211_PROT_CTSONLY = 1, /* CTS to self */ - IEEE80211_PROT_RTSCTS = 2, /* RTS-CTS */ -}; - -/* - * Authentication mode. - */ -enum ieee80211_authmode { - IEEE80211_AUTH_NONE = 0, - IEEE80211_AUTH_OPEN = 1, /* open */ - IEEE80211_AUTH_SHARED = 2, /* shared-key */ - IEEE80211_AUTH_8021X = 3, /* 802.1x */ - IEEE80211_AUTH_AUTO = 4, /* auto-select/accept */ - /* NB: these are used only for ioctls */ - IEEE80211_AUTH_WPA = 5, /* WPA/RSN w/ 802.1x/PSK */ -}; - -/* - * Roaming mode is effectively who controls the operation - * of the 802.11 state machine when operating as a station. - * State transitions are controlled either by the driver - * (typically when management frames are processed by the - * hardware/firmware), the host (auto/normal operation of - * the 802.11 layer), or explicitly through ioctl requests - * when applications like wpa_supplicant want control. - */ -enum ieee80211_roamingmode { - IEEE80211_ROAMING_DEVICE= 0, /* driver/hardware control */ - IEEE80211_ROAMING_AUTO = 1, /* 802.11 layer control */ - IEEE80211_ROAMING_MANUAL= 2, /* application control */ -}; - -/* - * Scanning mode controls station scanning work; this is - * used only when roaming mode permits the host to select - * the bss to join/channel to use. - */ -enum ieee80211_scanmode { - IEEE80211_SCAN_DEVICE = 0, /* driver/hardware control */ - IEEE80211_SCAN_BEST = 1, /* 802.11 layer selects best */ - IEEE80211_SCAN_FIRST = 2, /* take first suitable candidate */ -}; - -enum ieee80211_scanflags { - IEEE80211_NOSCAN_DEFAULT = (1 << 0), - IEEE80211_NOSCAN_SET = (1 << 1), -}; - -/* - * Channels are specified by frequency and attributes. - */ -struct ieee80211_channel { - u_int16_t ic_freq; /* setting in MHz */ - u_int16_t ic_flags; /* see below */ - u_int8_t ic_ieee; /* IEEE channel number */ - int8_t ic_maxregpower; /* maximum regulatory tx power in dBm */ - int8_t ic_maxpower; /* maximum tx power in dBm */ - int8_t ic_minpower; /* minimum tx power in dBm */ - u_int8_t ic_scanflags; - u_int8_t ic_idletime; /* phy idle time in % */ -}; - -#define IEEE80211_CHAN_MAX 255 -#define IEEE80211_CHAN_BYTES 32 /* howmany(IEEE80211_CHAN_MAX, NBBY) */ -#define IEEE80211_CHAN_ANY 0xffff /* token for ``any channel'' */ -#define IEEE80211_CHAN_ANYC ((struct ieee80211_channel *) IEEE80211_CHAN_ANY) - -#define IEEE80211_RADAR_CHANCHANGE_TBTT_COUNT 0 -#define IEEE80211_DEFAULT_CHANCHANGE_TBTT_COUNT 3 - -#define IEEE80211_RADAR_TEST_MUTE_CHAN 36 /* Move to channel 36 for mute test */ - -/* bits 0-3 are for private use by drivers */ -/* channel attributes */ -#define IEEE80211_CHAN_TURBO 0x0010 /* Turbo channel */ -#define IEEE80211_CHAN_CCK 0x0020 /* CCK channel */ -#define IEEE80211_CHAN_OFDM 0x0040 /* OFDM channel */ -#define IEEE80211_CHAN_2GHZ 0x0080 /* 2 GHz spectrum channel. */ -#define IEEE80211_CHAN_5GHZ 0x0100 /* 5 GHz spectrum channel */ -#define IEEE80211_CHAN_PASSIVE 0x0200 /* Only passive scan allowed */ -#define IEEE80211_CHAN_DYN 0x0400 /* Dynamic CCK-OFDM channel */ -#define IEEE80211_CHAN_GFSK 0x0800 /* GFSK channel (FHSS PHY) */ -#define IEEE80211_CHAN_RADAR 0x1000 /* Radar found on channel */ -#define IEEE80211_CHAN_STURBO 0x2000 /* 11a static turbo channel only */ -#define IEEE80211_CHAN_HALF 0x4000 /* Half rate channel */ -#define IEEE80211_CHAN_QUARTER 0x8000 /* Quarter rate channel */ - -/* - * Useful combinations of channel characteristics. - */ -#define IEEE80211_CHAN_FHSS \ - (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_GFSK) -#define IEEE80211_CHAN_A \ - (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM) -#define IEEE80211_CHAN_B \ - (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_CCK) -#define IEEE80211_CHAN_PUREG \ - (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM) -#define IEEE80211_CHAN_G \ - (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_DYN) -#define IEEE80211_CHAN_108A \ - (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_TURBO) -#define IEEE80211_CHAN_108G \ - (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_TURBO) -#define IEEE80211_CHAN_ST \ - (IEEE80211_CHAN_108A | IEEE80211_CHAN_STURBO) - -#define IEEE80211_CHAN_ALL \ - (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_GFSK | \ - IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN) -#define IEEE80211_CHAN_ALLTURBO \ - (IEEE80211_CHAN_ALL | IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO) - -#define IEEE80211_IS_CHAN_FHSS(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_FHSS) == IEEE80211_CHAN_FHSS) -#define IEEE80211_IS_CHAN_A(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A) -#define IEEE80211_IS_CHAN_B(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B) -#define IEEE80211_IS_CHAN_PUREG(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_PUREG) == IEEE80211_CHAN_PUREG) -#define IEEE80211_IS_CHAN_G(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G) -#define IEEE80211_IS_CHAN_ANYG(_c) \ - (IEEE80211_IS_CHAN_PUREG(_c) || IEEE80211_IS_CHAN_G(_c)) -#define IEEE80211_IS_CHAN_ST(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_ST) == IEEE80211_CHAN_ST) -#define IEEE80211_IS_CHAN_108A(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_108A) == IEEE80211_CHAN_108A) -#define IEEE80211_IS_CHAN_108G(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_108G) == IEEE80211_CHAN_108G) - -#define IEEE80211_IS_CHAN_2GHZ(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_2GHZ) != 0) -#define IEEE80211_IS_CHAN_5GHZ(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_5GHZ) != 0) -#define IEEE80211_IS_CHAN_OFDM(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_OFDM) != 0) -#define IEEE80211_IS_CHAN_CCK(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_CCK) != 0) -#define IEEE80211_IS_CHAN_GFSK(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_GFSK) != 0) -#define IEEE80211_IS_CHAN_TURBO(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_TURBO) != 0) -#define IEEE80211_IS_CHAN_STURBO(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_STURBO) != 0) -#define IEEE80211_IS_CHAN_DTURBO(_c) \ - (((_c)->ic_flags & \ - (IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO)) == IEEE80211_CHAN_TURBO) -#define IEEE80211_IS_CHAN_HALF(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_HALF) != 0) -#define IEEE80211_IS_CHAN_QUARTER(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_QUARTER) != 0) - -#define IEEE80211_IS_CHAN_RADAR(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_RADAR) != 0) -#define IEEE80211_IS_CHAN_PASSIVE(_c) \ - (((_c)->ic_flags & IEEE80211_CHAN_PASSIVE) != 0) -#define IEEE80211_ARE_CHANS_SAME_MODE(_a, _b) \ - (((_a)->ic_flags & IEEE80211_CHAN_ALLTURBO) == ((_b)->ic_flags & IEEE80211_CHAN_ALLTURBO)) - -/* ni_chan encoding for FH phy */ -#define IEEE80211_FH_CHANMOD 80 -#define IEEE80211_FH_CHAN(set,pat) (((set) - 1) * IEEE80211_FH_CHANMOD + (pat)) -#define IEEE80211_FH_CHANSET(chan) ((chan) / IEEE80211_FH_CHANMOD + 1) -#define IEEE80211_FH_CHANPAT(chan) ((chan) % IEEE80211_FH_CHANMOD) - -/* - * Spectrum Management (IEEE 802.11h-2003) - */ - -/* algorithm for (re)association based on supported channels - * (the one mentioned in 11.6.1 as out of scope of .11h) */ -enum ieee80211_sc_algorithm { - IEEE80211_SC_NONE, - /* - * Do not disallow anyone from associating. When needed, channel will - * be switched to the most suitable channel, no matter client stations - * support it or not. - */ - - IEEE80211_SC_LOOSE, - /* - * Do not disallow anyone from associating. When needed, channel will - * be switched to a suitable channel, which will be chosen taking - * ni->ni_suppchans and ic->ic_sc_sldg under consideration. - */ - - IEEE80211_SC_TIGHT, - /* - * Allow to associate if there are at least ic->ic_mincom channels - * common to the associating station and all of the already associated - * stations. If the number of new common channels is less than - * required, consider disassociating some other STAs. Such a - * disassociation will be performed if (and only if) the association we - * are currently considering would be then possible and the count of - * the resultant set of common channels (ic_chan_nodes[i] == - * ic_cn_total) would increase by some amount. Whether the number of - * the new channels that could be gained is enough to sacrifice a - * number of STAs is determined by the ic->ic_slcg parameter. - */ - - IEEE80211_SC_STRICT - /* - * Basically the same behavior as IEEE80211_SC_TIGHT, except that if a - * station does not specify Supported Channels, then it is denied to - * associate. - */ -}; - -/* - * 802.11 rate set. - */ -#define IEEE80211_RATE_SIZE 8 /* 802.11 standard */ -#define IEEE80211_RATE_MAXSIZE 15 /* max rates we'll handle */ -#define IEEE80211_SANITISE_RATESIZE(_rsz) \ - ((_rsz > IEEE80211_RATE_MAXSIZE) ? IEEE80211_RATE_MAXSIZE : _rsz) - -struct ieee80211_rateset { - u_int8_t rs_nrates; - u_int8_t rs_rates[IEEE80211_RATE_MAXSIZE]; -}; - -struct ieee80211_roam { - int8_t rssi11a; /* rssi thresh for 11a bss */ - int8_t rssi11b; /* for 11g sta in 11b bss */ - int8_t rssi11bOnly; /* for 11b sta */ - u_int8_t pad1; - u_int8_t rate11a; /* rate thresh for 11a bss */ - u_int8_t rate11b; /* for 11g sta in 11b bss */ - u_int8_t rate11bOnly; /* for 11b sta */ - u_int8_t pad2; -}; -#endif /* _NET80211__IEEE80211_H_ */ diff --git a/package/network/services/hostapd/madwifi/net80211/ieee80211.h b/package/network/services/hostapd/madwifi/net80211/ieee80211.h deleted file mode 100644 index a39d4b9263..0000000000 --- a/package/network/services/hostapd/madwifi/net80211/ieee80211.h +++ /dev/null @@ -1,997 +0,0 @@ -/*- - * Copyright (c) 2001 Atsushi Onoe - * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * $Id: ieee80211.h 3268 2008-01-26 20:48:11Z mtaylor $ - */ -#ifndef _NET80211_IEEE80211_H_ -#define _NET80211_IEEE80211_H_ - -/* - * 802.11 protocol definitions. - */ - -#define IEEE80211_ADDR_LEN 6 /* size of 802.11 address */ -/* is 802.11 address multicast/broadcast? */ -#define IEEE80211_IS_MULTICAST(_a) (*(_a) & 0x01) - -/* IEEE 802.11 PLCP header */ -struct ieee80211_plcp_hdr { - u_int16_t i_sfd; - u_int8_t i_signal; - u_int8_t i_service; - u_int16_t i_length; - u_int16_t i_crc; -} __packed; - -#define IEEE80211_PLCP_SFD 0xF3A0 -#define IEEE80211_PLCP_SERVICE 0x00 - -/* - * generic definitions for IEEE 802.11 frames - */ -struct ieee80211_frame { - u_int8_t i_fc[2]; - __le16 i_dur; - u_int8_t i_addr1[IEEE80211_ADDR_LEN]; - u_int8_t i_addr2[IEEE80211_ADDR_LEN]; - u_int8_t i_addr3[IEEE80211_ADDR_LEN]; - u_int8_t i_seq[2]; - /* possibly followed by addr4[IEEE80211_ADDR_LEN]; */ - /* see below */ -} __packed; - -struct ieee80211_qosframe { - u_int8_t i_fc[2]; - __le16 i_dur; - u_int8_t i_addr1[IEEE80211_ADDR_LEN]; - u_int8_t i_addr2[IEEE80211_ADDR_LEN]; - u_int8_t i_addr3[IEEE80211_ADDR_LEN]; - u_int8_t i_seq[2]; - u_int8_t i_qos[2]; - /* possibly followed by addr4[IEEE80211_ADDR_LEN]; */ - /* see below */ -} __packed; - -struct ieee80211_qoscntl { - u_int8_t i_qos[2]; -}; - -struct ieee80211_frame_addr4 { - u_int8_t i_fc[2]; - __le16 i_dur; - u_int8_t i_addr1[IEEE80211_ADDR_LEN]; - u_int8_t i_addr2[IEEE80211_ADDR_LEN]; - u_int8_t i_addr3[IEEE80211_ADDR_LEN]; - u_int8_t i_seq[2]; - u_int8_t i_addr4[IEEE80211_ADDR_LEN]; -} __packed; - - -struct ieee80211_qosframe_addr4 { - u_int8_t i_fc[2]; - __le16 i_dur; - u_int8_t i_addr1[IEEE80211_ADDR_LEN]; - u_int8_t i_addr2[IEEE80211_ADDR_LEN]; - u_int8_t i_addr3[IEEE80211_ADDR_LEN]; - u_int8_t i_seq[2]; - u_int8_t i_addr4[IEEE80211_ADDR_LEN]; - u_int8_t i_qos[2]; -} __packed; - -struct ieee80211_ctlframe_addr2 { - u_int8_t i_fc[2]; - __le16 i_aidordur; /* AID or duration */ - u_int8_t i_addr1[IEEE80211_ADDR_LEN]; - u_int8_t i_addr2[IEEE80211_ADDR_LEN]; -} __packed; - -#define IEEE80211_FC0_VERSION_MASK 0x03 -#define IEEE80211_FC0_VERSION_SHIFT 0 -#define IEEE80211_FC0_VERSION_0 0x00 -#define IEEE80211_FC0_TYPE_MASK 0x0c -#define IEEE80211_FC0_TYPE_SHIFT 2 -#define IEEE80211_FC0_TYPE_MGT 0x00 -#define IEEE80211_FC0_TYPE_CTL 0x04 -#define IEEE80211_FC0_TYPE_DATA 0x08 - -#define IEEE80211_FC0_SUBTYPE_MASK 0xf0 -#define IEEE80211_FC0_SUBTYPE_SHIFT 4 -/* for TYPE_MGT */ -#define IEEE80211_FC0_SUBTYPE_ASSOC_REQ 0x00 -#define IEEE80211_FC0_SUBTYPE_ASSOC_RESP 0x10 -#define IEEE80211_FC0_SUBTYPE_REASSOC_REQ 0x20 -#define IEEE80211_FC0_SUBTYPE_REASSOC_RESP 0x30 -#define IEEE80211_FC0_SUBTYPE_PROBE_REQ 0x40 -#define IEEE80211_FC0_SUBTYPE_PROBE_RESP 0x50 -#define IEEE80211_FC0_SUBTYPE_BEACON 0x80 -#define IEEE80211_FC0_SUBTYPE_ATIM 0x90 -#define IEEE80211_FC0_SUBTYPE_DISASSOC 0xa0 -#define IEEE80211_FC0_SUBTYPE_AUTH 0xb0 -#define IEEE80211_FC0_SUBTYPE_DEAUTH 0xc0 -#define IEEE80211_FC0_SUBTYPE_ACTION 0xd0 -/* for TYPE_CTL */ -#define IEEE80211_FC0_SUBTYPE_PS_POLL 0xa0 -#define IEEE80211_FC0_SUBTYPE_RTS 0xb0 -#define IEEE80211_FC0_SUBTYPE_CTS 0xc0 -#define IEEE80211_FC0_SUBTYPE_ACK 0xd0 -#define IEEE80211_FC0_SUBTYPE_CF_END 0xe0 -#define IEEE80211_FC0_SUBTYPE_CF_END_ACK 0xf0 -/* for TYPE_DATA (bit combination) */ -#define IEEE80211_FC0_SUBTYPE_DATA 0x00 -#define IEEE80211_FC0_SUBTYPE_CF_ACK 0x10 -#define IEEE80211_FC0_SUBTYPE_CF_POLL 0x20 -#define IEEE80211_FC0_SUBTYPE_CF_ACPL 0x30 -#define IEEE80211_FC0_SUBTYPE_NODATA 0x40 -#define IEEE80211_FC0_SUBTYPE_CFACK 0x50 -#define IEEE80211_FC0_SUBTYPE_CFPOLL 0x60 -#define IEEE80211_FC0_SUBTYPE_CF_ACK_CF_ACK 0x70 -#define IEEE80211_FC0_SUBTYPE_QOS 0x80 -#define IEEE80211_FC0_SUBTYPE_QOS_NULL 0xc0 - -#define IEEE80211_FC1_DIR_MASK 0x03 -#define IEEE80211_FC1_DIR_NODS 0x00 /* STA->STA */ -#define IEEE80211_FC1_DIR_TODS 0x01 /* STA->AP */ -#define IEEE80211_FC1_DIR_FROMDS 0x02 /* AP ->STA */ -#define IEEE80211_FC1_DIR_DSTODS 0x03 /* AP ->AP */ - -#define IEEE80211_FC1_MORE_FRAG 0x04 -#define IEEE80211_FC1_RETRY 0x08 -#define IEEE80211_FC1_PWR_MGT 0x10 -#define IEEE80211_FC1_MORE_DATA 0x20 -#define IEEE80211_FC1_PROT 0x40 -#define IEEE80211_FC1_ORDER 0x80 - -#define IEEE80211_SEQ_FRAG_MASK 0x000f -#define IEEE80211_SEQ_FRAG_SHIFT 0 -#define IEEE80211_SEQ_SEQ_MASK 0xfff0 -#define IEEE80211_SEQ_SEQ_SHIFT 4 - -#define IEEE80211_NWID_LEN 32 - -#define IEEE80211_QOS_TXOP 0x00ff -/* bit 8 is reserved */ -#define IEEE80211_QOS_ACKPOLICY 0x60 -#define IEEE80211_QOS_ACKPOLICY_S 5 -#define IEEE80211_QOS_EOSP 0x10 -#define IEEE80211_QOS_EOSP_S 4 -#define IEEE80211_QOS_TID 0x0f - -#define IEEE80211_FRM_HAS_BODY(_wh) \ - (((_wh)->i_fc[0] & IEEE80211_FC0_TYPE_MASK) != \ - IEEE80211_FC0_TYPE_CTL) - -/* - * Country/Region Codes from MS WINNLS.H - * Numbering from ISO 3166 - * XXX belongs elsewhere - */ -enum CountryCode { - CTRY_ALBANIA = 8, /* Albania */ - CTRY_ALGERIA = 12, /* Algeria */ - CTRY_ARGENTINA = 32, /* Argentina */ - CTRY_ARMENIA = 51, /* Armenia */ - CTRY_AUSTRALIA = 36, /* Australia */ - CTRY_AUSTRIA = 40, /* Austria */ - CTRY_AZERBAIJAN = 31, /* Azerbaijan */ - CTRY_BAHRAIN = 48, /* Bahrain */ - CTRY_BELARUS = 112, /* Belarus */ - CTRY_BELGIUM = 56, /* Belgium */ - CTRY_BELIZE = 84, /* Belize */ - CTRY_BOLIVIA = 68, /* Bolivia */ - CTRY_BRAZIL = 76, /* Brazil */ - CTRY_BRUNEI_DARUSSALAM = 96, /* Brunei Darussalam */ - CTRY_BULGARIA = 100, /* Bulgaria */ - CTRY_CANADA = 124, /* Canada */ - CTRY_CHILE = 152, /* Chile */ - CTRY_CHINA = 156, /* People's Republic of China */ - CTRY_COLOMBIA = 170, /* Colombia */ - CTRY_COSTA_RICA = 188, /* Costa Rica */ - CTRY_CROATIA = 191, /* Croatia */ - CTRY_CYPRUS = 196, - CTRY_CZECH = 203, /* Czech Republic */ - CTRY_DENMARK = 208, /* Denmark */ - CTRY_DOMINICAN_REPUBLIC = 214, /* Dominican Republic */ - CTRY_ECUADOR = 218, /* Ecuador */ - CTRY_EGYPT = 818, /* Egypt */ - CTRY_EL_SALVADOR = 222, /* El Salvador */ - CTRY_ESTONIA = 233, /* Estonia */ - CTRY_FAEROE_ISLANDS = 234, /* Faeroe Islands */ - CTRY_FINLAND = 246, /* Finland */ - CTRY_FRANCE = 250, /* France */ - CTRY_FRANCE2 = 255, /* France2 */ - CTRY_GEORGIA = 268, /* Georgia */ - CTRY_GERMANY = 276, /* Germany */ - CTRY_GREECE = 300, /* Greece */ - CTRY_GUATEMALA = 320, /* Guatemala */ - CTRY_HONDURAS = 340, /* Honduras */ - CTRY_HONG_KONG = 344, /* Hong Kong S.A.R., P.R.C. */ - CTRY_HUNGARY = 348, /* Hungary */ - CTRY_ICELAND = 352, /* Iceland */ - CTRY_INDIA = 356, /* India */ - CTRY_INDONESIA = 360, /* Indonesia */ - CTRY_IRAN = 364, /* Iran */ - CTRY_IRAQ = 368, /* Iraq */ - CTRY_IRELAND = 372, /* Ireland */ - CTRY_ISRAEL = 376, /* Israel */ - CTRY_ITALY = 380, /* Italy */ - CTRY_JAMAICA = 388, /* Jamaica */ - CTRY_JAPAN = 392, /* Japan */ - CTRY_JAPAN1 = 393, /* Japan (JP1) */ - CTRY_JAPAN2 = 394, /* Japan (JP0) */ - CTRY_JAPAN3 = 395, /* Japan (JP1-1) */ - CTRY_JAPAN4 = 396, /* Japan (JE1) */ - CTRY_JAPAN5 = 397, /* Japan (JE2) */ - CTRY_JAPAN6 = 399, /* Japan (JP6) */ - CTRY_JAPAN7 = 900, /* Japan */ - CTRY_JAPAN8 = 901, /* Japan */ - CTRY_JAPAN9 = 902, /* Japan */ - CTRY_JAPAN10 = 903, /* Japan */ - CTRY_JAPAN11 = 904, /* Japan */ - CTRY_JAPAN12 = 905, /* Japan */ - CTRY_JAPAN13 = 906, /* Japan */ - CTRY_JAPAN14 = 907, /* Japan */ - CTRY_JAPAN15 = 908, /* Japan */ - CTRY_JAPAN16 = 909, /* Japan */ - CTRY_JAPAN17 = 910, /* Japan */ - CTRY_JAPAN18 = 911, /* Japan */ - CTRY_JAPAN19 = 912, /* Japan */ - CTRY_JAPAN20 = 913, /* Japan */ - CTRY_JAPAN21 = 914, /* Japan */ - CTRY_JAPAN22 = 915, /* Japan */ - CTRY_JAPAN23 = 916, /* Japan */ - CTRY_JAPAN24 = 917, /* Japan */ - CTRY_JAPAN25 = 918, /* Japan */ - CTRY_JAPAN26 = 919, /* Japan */ - CTRY_JAPAN27 = 920, /* Japan */ - CTRY_JAPAN28 = 921, /* Japan */ - CTRY_JAPAN29 = 922, /* Japan */ - CTRY_JAPAN30 = 923, /* Japan */ - CTRY_JAPAN31 = 924, /* Japan */ - CTRY_JAPAN32 = 925, /* Japan */ - CTRY_JAPAN33 = 926, /* Japan */ - CTRY_JAPAN34 = 927, /* Japan */ - CTRY_JAPAN35 = 928, /* Japan */ - CTRY_JAPAN36 = 929, /* Japan */ - CTRY_JAPAN37 = 930, /* Japan */ - CTRY_JAPAN38 = 931, /* Japan */ - CTRY_JAPAN39 = 932, /* Japan */ - CTRY_JAPAN40 = 933, /* Japan */ - CTRY_JAPAN41 = 934, /* Japan */ - CTRY_JAPAN42 = 935, /* Japan */ - CTRY_JAPAN43 = 936, /* Japan */ - CTRY_JAPAN44 = 937, /* Japan */ - CTRY_JAPAN45 = 938, /* Japan */ - CTRY_JAPAN46 = 939, /* Japan */ - CTRY_JAPAN47 = 940, /* Japan */ - CTRY_JAPAN48 = 941, /* Japan */ - CTRY_JORDAN = 400, /* Jordan */ - CTRY_KAZAKHSTAN = 398, /* Kazakhstan */ - CTRY_KENYA = 404, /* Kenya */ - CTRY_KOREA_NORTH = 408, /* North Korea */ - CTRY_KOREA_ROC = 410, /* South Korea */ - CTRY_KOREA_ROC2 = 411, /* South Korea */ - CTRY_KUWAIT = 414, /* Kuwait */ - CTRY_LATVIA = 428, /* Latvia */ - CTRY_LEBANON = 422, /* Lebanon */ - CTRY_LIBYA = 434, /* Libya */ - CTRY_LIECHTENSTEIN = 438, /* Liechtenstein */ - CTRY_LITHUANIA = 440, /* Lithuania */ - CTRY_LUXEMBOURG = 442, /* Luxembourg */ - CTRY_MACAU = 446, /* Macau */ - CTRY_MACEDONIA = 807, /* the Former Yugoslav Republic of Macedonia */ - CTRY_MALAYSIA = 458, /* Malaysia */ - CTRY_MEXICO = 484, /* Mexico */ - CTRY_MONACO = 492, /* Principality of Monaco */ - CTRY_MOROCCO = 504, /* Morocco */ - CTRY_NETHERLANDS = 528, /* Netherlands */ - CTRY_NEW_ZEALAND = 554, /* New Zealand */ - CTRY_NICARAGUA = 558, /* Nicaragua */ - CTRY_NORWAY = 578, /* Norway */ - CTRY_OMAN = 512, /* Oman */ - CTRY_PAKISTAN = 586, /* Islamic Republic of Pakistan */ - CTRY_PANAMA = 591, /* Panama */ - CTRY_PARAGUAY = 600, /* Paraguay */ - CTRY_PERU = 604, /* Peru */ - CTRY_PHILIPPINES = 608, /* Republic of the Philippines */ - CTRY_POLAND = 616, /* Poland */ - CTRY_PORTUGAL = 620, /* Portugal */ - CTRY_PUERTO_RICO = 630, /* Puerto Rico */ - CTRY_QATAR = 634, /* Qatar */ - CTRY_ROMANIA = 642, /* Romania */ - CTRY_RUSSIA = 643, /* Russia */ - CTRY_SAUDI_ARABIA = 682, /* Saudi Arabia */ - CTRY_SINGAPORE = 702, /* Singapore */ - CTRY_SLOVAKIA = 703, /* Slovak Republic */ - CTRY_SLOVENIA = 705, /* Slovenia */ - CTRY_SOUTH_AFRICA = 710, /* South Africa */ - CTRY_SPAIN = 724, /* Spain */ - CTRY_SWEDEN = 752, /* Sweden */ - CTRY_SWITZERLAND = 756, /* Switzerland */ - CTRY_SYRIA = 760, /* Syria */ - CTRY_TAIWAN = 158, /* Taiwan */ - CTRY_THAILAND = 764, /* Thailand */ - CTRY_TRINIDAD_Y_TOBAGO = 780, /* Trinidad y Tobago */ - CTRY_TUNISIA = 788, /* Tunisia */ - CTRY_TURKEY = 792, /* Turkey */ - CTRY_UAE = 784, /* U.A.E. */ - CTRY_UKRAINE = 804, /* Ukraine */ - CTRY_UNITED_KINGDOM = 826, /* United Kingdom */ - CTRY_UNITED_STATES = 840, /* United States */ - CTRY_UNITED_STATES_FCC49 = 842, /* United States (Public Safety)*/ - CTRY_URUGUAY = 858, /* Uruguay */ - CTRY_UZBEKISTAN = 860, /* Uzbekistan */ - CTRY_VENEZUELA = 862, /* Venezuela */ - CTRY_VIET_NAM = 704, /* Viet Nam */ - CTRY_YEMEN = 887, /* Yemen */ - CTRY_ZIMBABWE = 716 /* Zimbabwe */ -}; - -/* - * Generic information element - */ -struct ieee80211_ie { - u_int8_t id; - u_int8_t len; - u_int8_t info[0]; -} __packed; - -/* - * Country information element. - */ -#define IEEE80211_COUNTRY_MAX_TRIPLETS (83) -struct ieee80211_ie_country { - u_int8_t country_id; - u_int8_t country_len; - u_int8_t country_str[3]; - u_int8_t country_triplet[IEEE80211_COUNTRY_MAX_TRIPLETS * 3]; -} __packed; - -/* - * Power Constraint information element. - */ -struct ieee80211_ie_pwrcnstr { - u_int8_t pc_id; /* IEEE80211_ELEMID_PWRCNSTR */ - u_int8_t pc_len; /* == 2 */ - u_int8_t pc_lpc; /* Local Power Constraint [dB] */ -} __packed; - -/* - * Power Capability information element. - */ -struct ieee80211_ie_pwrcap { - u_int8_t pc_id; /* IEEE80211_ELEMID_PWRCAP */ - u_int8_t pc_len; /* == 2 */ - int8_t pc_mintxpow; /* Minimum Transmit Power Capability [dBm] */ - int8_t pc_maxtxpow; /* Maximum Transmit Power Capability [dBm] */ -} __packed; - -/* - * Supported Channels information element. - */ -#define IEEE80211_SUPPCHAN_MAX_PAIRS (127) -struct ieee80211_ie_sc { - u_int8_t sc_id; /* IEEE80211_ELEMID_SUPPCHAN */ - u_int8_t sc_len; /* == 2 * number of sc_subband elements */ - struct { - u_int8_t sc_first; /* First Channel Number */ - u_int8_t sc_number; /* Number of Channels */ - } __packed sc_subband[IEEE80211_SUPPCHAN_MAX_PAIRS]; -} __packed; - -/* - * Channel Switch Announcement information element. - */ -struct ieee80211_ie_csa { - u_int8_t csa_id; /* IEEE80211_ELEMID_CHANSWITCHANN */ - u_int8_t csa_len; /* == 3 */ - u_int8_t csa_mode; /* Channel Switch Mode: 1 == stop transmission until CS */ - u_int8_t csa_chan; /* New Channel Number */ - u_int8_t csa_count; /* TBTTs until Channel Switch happens */ -} __packed; - -/* minimal Channel Switch Count in the initial announcement */ -#define IEEE80211_CSA_PROTECTION_PERIOD 3 - -/* maximum allowed deviance of measurement of intervals between CSA in Beacons */ -#define IEEE80211_CSA_SANITY_THRESHOLD 100 - - -/* does frame have QoS sequence control data */ -#define IEEE80211_QOS_HAS_SEQ(wh) \ - (((wh)->i_fc[0] & \ - (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_QOS)) == \ - (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS)) - -#define WME_QOSINFO_COUNT 0x0f /* Mask for Param Set Count field */ -/* - * WME/802.11e information element. - */ -struct ieee80211_ie_wme { - u_int8_t wme_id; /* IEEE80211_ELEMID_VENDOR */ - u_int8_t wme_len; /* length in bytes */ - u_int8_t wme_oui[3]; /* 0x00, 0x50, 0xf2 */ - u_int8_t wme_type; /* OUI type */ - u_int8_t wme_subtype; /* OUI subtype */ - u_int8_t wme_version; /* spec revision */ - u_int8_t wme_info; /* QoS info */ -} __packed; - -/* - * WME/802.11e Tspec Element - */ -struct ieee80211_wme_tspec { - u_int8_t ts_id; - u_int8_t ts_len; - u_int8_t ts_oui[3]; - u_int8_t ts_oui_type; - u_int8_t ts_oui_subtype; - u_int8_t ts_version; - u_int8_t ts_tsinfo[3]; - u_int8_t ts_nom_msdu[2]; - u_int8_t ts_max_msdu[2]; - u_int8_t ts_min_svc[4]; - u_int8_t ts_max_svc[4]; - u_int8_t ts_inactv_intv[4]; - u_int8_t ts_susp_intv[4]; - u_int8_t ts_start_svc[4]; - u_int8_t ts_min_rate[4]; - u_int8_t ts_mean_rate[4]; - u_int8_t ts_max_burst[4]; - u_int8_t ts_min_phy[4]; - u_int8_t ts_peak_rate[4]; - u_int8_t ts_delay[4]; - u_int8_t ts_surplus[2]; - u_int8_t ts_medium_time[2]; -} __packed; - -/* - * WME AC parameter field - */ - -struct ieee80211_wme_acparams { - u_int8_t acp_aci_aifsn; - u_int8_t acp_logcwminmax; - u_int16_t acp_txop; -} __packed; - -#define IEEE80211_WME_PARAM_LEN 24 -#define WME_NUM_AC 4 /* 4 AC categories */ - -#define WME_PARAM_ACI 0x60 /* Mask for ACI field */ -#define WME_PARAM_ACI_S 5 /* Shift for ACI field */ -#define WME_PARAM_ACM 0x10 /* Mask for ACM bit */ -#define WME_PARAM_ACM_S 4 /* Shift for ACM bit */ -#define WME_PARAM_AIFSN 0x0f /* Mask for aifsn field */ -#define WME_PARAM_AIFSN_S 0 /* Shift for aifsn field */ -#define WME_PARAM_LOGCWMIN 0x0f /* Mask for CwMin field (in log) */ -#define WME_PARAM_LOGCWMIN_S 0 /* Shift for CwMin field */ -#define WME_PARAM_LOGCWMAX 0xf0 /* Mask for CwMax field (in log) */ -#define WME_PARAM_LOGCWMAX_S 4 /* Shift for CwMax field */ - -#define WME_AC_TO_TID(_ac) ( \ - ((_ac) == WME_AC_VO) ? 6 : \ - ((_ac) == WME_AC_VI) ? 5 : \ - ((_ac) == WME_AC_BK) ? 1 : \ - 0) - -#define TID_TO_WME_AC(_tid) ( \ - ((_tid) < 1) ? WME_AC_BE : \ - ((_tid) < 3) ? WME_AC_BK : \ - ((_tid) < 6) ? WME_AC_VI : \ - WME_AC_VO) - -/* - * WME Parameter Element - */ - -struct ieee80211_wme_param { - u_int8_t param_id; - u_int8_t param_len; - u_int8_t param_oui[3]; - u_int8_t param_oui_type; - u_int8_t param_oui_sybtype; - u_int8_t param_version; - u_int8_t param_qosInfo; - u_int8_t param_reserved; - struct ieee80211_wme_acparams params_acParams[WME_NUM_AC]; -} __packed; - -/* - * WME U-APSD qos info field defines - */ -#define WME_CAPINFO_UAPSD_EN 0x00000080 -#define WME_CAPINFO_UAPSD_VO 0x00000001 -#define WME_CAPINFO_UAPSD_VI 0x00000002 -#define WME_CAPINFO_UAPSD_BK 0x00000004 -#define WME_CAPINFO_UAPSD_BE 0x00000008 -#define WME_CAPINFO_UAPSD_ACFLAGS_SHIFT 0 -#define WME_CAPINFO_UAPSD_ACFLAGS_MASK 0xF -#define WME_CAPINFO_UAPSD_MAXSP_SHIFT 5 -#define WME_CAPINFO_UAPSD_MAXSP_MASK 0x3 -#define WME_CAPINFO_IE_OFFSET 8 -#define WME_UAPSD_MAXSP(_qosinfo) \ - (((_qosinfo) >> WME_CAPINFO_UAPSD_MAXSP_SHIFT) & \ - WME_CAPINFO_UAPSD_MAXSP_MASK) -#define WME_UAPSD_AC_ENABLED(_ac, _qosinfo) \ - ((1 << (3 - (_ac))) & ( \ - ((_qosinfo) >> WME_CAPINFO_UAPSD_ACFLAGS_SHIFT) & \ - WME_CAPINFO_UAPSD_ACFLAGS_MASK)) - -/* - * Atheros Advanced Capability information element. - */ -struct ieee80211_ie_athAdvCap { - u_int8_t athAdvCap_id; /* IEEE80211_ELEMID_VENDOR */ - u_int8_t athAdvCap_len; /* length in bytes */ - u_int8_t athAdvCap_oui[3]; /* 0x00, 0x03, 0x7f */ - u_int8_t athAdvCap_type; /* OUI type */ - u_int8_t athAdvCap_subtype; /* OUI subtype */ - u_int8_t athAdvCap_version; /* spec revision */ - u_int8_t athAdvCap_capability; /* Capability info */ - u_int16_t athAdvCap_defKeyIndex; -} __packed; - -/* - * Atheros XR information element. - */ -struct ieee80211_xr_param { - u_int8_t param_id; - u_int8_t param_len; - u_int8_t param_oui[3]; - u_int8_t param_oui_type; - u_int8_t param_oui_sybtype; - u_int8_t param_version; - u_int8_t param_Info; - u_int8_t param_base_bssid[IEEE80211_ADDR_LEN]; - u_int8_t param_xr_bssid[IEEE80211_ADDR_LEN]; - u_int16_t param_xr_beacon_interval; - u_int8_t param_base_ath_capability; - u_int8_t param_xr_ath_capability; -} __packed; - -/* Atheros capabilities */ -#define IEEE80211_ATHC_TURBOP 0x0001 /* Turbo Prime */ -#define IEEE80211_ATHC_COMP 0x0002 /* Compression */ -#define IEEE80211_ATHC_FF 0x0004 /* Fast Frames */ -#define IEEE80211_ATHC_XR 0x0008 /* Xtended Range support */ -#define IEEE80211_ATHC_AR 0x0010 /* Advanced Radar support */ -#define IEEE80211_ATHC_BURST 0x0020 /* Bursting - not negotiated */ -#define IEEE80211_ATHC_WME 0x0040 /* CWMin tuning */ -#define IEEE80211_ATHC_BOOST 0x0080 /* Boost */ - -/* - * Management Notification Frame - */ -struct ieee80211_mnf { - u_int8_t mnf_category; - u_int8_t mnf_action; - u_int8_t mnf_dialog; - u_int8_t mnf_status; -} __packed; -#define MNF_SETUP_REQ 0 -#define MNF_SETUP_RESP 1 -#define MNF_TEARDOWN 2 - -/* - * Control frames. - */ -struct ieee80211_frame_min { - u_int8_t i_fc[2]; - __le16 i_dur; - u_int8_t i_addr1[IEEE80211_ADDR_LEN]; - u_int8_t i_addr2[IEEE80211_ADDR_LEN]; - /* FCS */ -} __packed; - -struct ieee80211_frame_rts { - u_int8_t i_fc[2]; - __le16 i_dur; - u_int8_t i_ra[IEEE80211_ADDR_LEN]; - u_int8_t i_ta[IEEE80211_ADDR_LEN]; - /* FCS */ -} __packed; - -struct ieee80211_frame_cts { - u_int8_t i_fc[2]; - __le16 i_dur; - u_int8_t i_ra[IEEE80211_ADDR_LEN]; - /* FCS */ -} __packed; - -struct ieee80211_frame_ack { - u_int8_t i_fc[2]; - __le16 i_dur; - u_int8_t i_ra[IEEE80211_ADDR_LEN]; - /* FCS */ -} __packed; - -struct ieee80211_frame_pspoll { - u_int8_t i_fc[2]; - u_int8_t i_aid[2]; - u_int8_t i_bssid[IEEE80211_ADDR_LEN]; - u_int8_t i_ta[IEEE80211_ADDR_LEN]; - /* FCS */ -} __packed; - -struct ieee80211_frame_cfend { /* NB: also CF-End+CF-Ack */ - u_int8_t i_fc[2]; - __le16 i_dur; /* should be zero */ - u_int8_t i_ra[IEEE80211_ADDR_LEN]; - u_int8_t i_bssid[IEEE80211_ADDR_LEN]; - /* FCS */ -} __packed; - -/* - * BEACON management packets - * - * octet timestamp[8] - * octet beacon interval[2] - * octet capability information[2] - * information element - * octet elemid - * octet length - * octet information[length] - */ - -typedef u_int8_t *ieee80211_mgt_beacon_t; - -#define IEEE80211_BEACON_INTERVAL(beacon) \ - ((beacon)[8] | ((beacon)[9] << 8)) -#define IEEE80211_BEACON_CAPABILITY(beacon) \ - ((beacon)[10] | ((beacon)[11] << 8)) - -#define IEEE80211_CAPINFO_ESS 0x0001 -#define IEEE80211_CAPINFO_IBSS 0x0002 -#define IEEE80211_CAPINFO_CF_POLLABLE 0x0004 -#define IEEE80211_CAPINFO_CF_POLLREQ 0x0008 -#define IEEE80211_CAPINFO_PRIVACY 0x0010 -#define IEEE80211_CAPINFO_SHORT_PREAMBLE 0x0020 -#define IEEE80211_CAPINFO_PBCC 0x0040 -#define IEEE80211_CAPINFO_CHNL_AGILITY 0x0080 -/* bits 8-9 are reserved (8 now for spectrum management) */ -#define IEEE80211_CAPINFO_SPECTRUM_MGMT 0x0100 -#define IEEE80211_CAPINFO_SHORT_SLOTTIME 0x0400 -#define IEEE80211_CAPINFO_RSN 0x0800 -/* bit 12 is reserved */ -#define IEEE80211_CAPINFO_DSSSOFDM 0x2000 -/* bits 14-15 are reserved */ - -/* - * 802.11i/WPA information element (maximally sized). - */ -struct ieee80211_ie_wpa { - u_int8_t wpa_id; /* IEEE80211_ELEMID_VENDOR */ - u_int8_t wpa_len; /* length in bytes */ - u_int8_t wpa_oui[3]; /* 0x00, 0x50, 0xf2 */ - u_int8_t wpa_type; /* OUI type */ - u_int16_t wpa_version; /* spec revision */ - u_int32_t wpa_mcipher[1]; /* multicast/group key cipher */ - u_int16_t wpa_uciphercnt; /* # pairwise key ciphers */ - u_int32_t wpa_uciphers[8]; /* ciphers */ - u_int16_t wpa_authselcnt; /* authentication selector cnt*/ - u_int32_t wpa_authsels[8]; /* selectors */ - u_int16_t wpa_caps; /* 802.11i capabilities */ - u_int16_t wpa_pmkidcnt; /* 802.11i pmkid count */ - u_int16_t wpa_pmkids[8]; /* 802.11i pmkids */ -} __packed; - -/* - * Management information element payloads. - */ - -enum { - IEEE80211_ELEMID_SSID = 0, - IEEE80211_ELEMID_RATES = 1, - IEEE80211_ELEMID_FHPARMS = 2, - IEEE80211_ELEMID_DSPARMS = 3, - IEEE80211_ELEMID_CFPARMS = 4, - IEEE80211_ELEMID_TIM = 5, - IEEE80211_ELEMID_IBSSPARMS = 6, - IEEE80211_ELEMID_COUNTRY = 7, - IEEE80211_ELEMID_HOPPATRNPARMS = 8, - IEEE80211_ELEMID_HOPPATRNTABLE = 9, - IEEE80211_ELEMID_REQINFO = 10, - IEEE80211_ELEMID_QBSSLOAD = 11, - IEEE80211_ELEMID_EDCAPARAM = 12, - IEEE80211_ELEMID_TSPEC = 13, - IEEE80211_ELEMID_TRAFCLASS = 14, - IEEE80211_ELEMID_SCHEDULE = 15, - IEEE80211_ELEMID_CHALLENGE = 16, - /* 17-31 reserved for challenge text extension */ - IEEE80211_ELEMID_PWRCNSTR = 32, - IEEE80211_ELEMID_PWRCAP = 33, - IEEE80211_ELEMID_TPCREQ = 34, - IEEE80211_ELEMID_TPCREP = 35, - IEEE80211_ELEMID_SUPPCHAN = 36, - IEEE80211_ELEMID_CHANSWITCHANN = 37, - IEEE80211_ELEMID_MEASREQ = 38, - IEEE80211_ELEMID_MEASREP = 39, - IEEE80211_ELEMID_QUIET = 40, - IEEE80211_ELEMID_IBSSDFS = 41, - IEEE80211_ELEMID_ERP = 42, - IEEE80211_ELEMID_TSDELAY = 43, - IEEE80211_ELEMID_TCLASSPROC = 44, - IEEE80211_ELEMID_QOS = 46, - IEEE80211_ELEMID_RSN = 48, - /* 49 reserved */ - IEEE80211_ELEMID_XRATES = 50, - /* 128-129 proprietary elements used by Agere chipsets */ - IEEE80211_ELEMID_AGERE1 = 128, - IEEE80211_ELEMID_AGERE2 = 129, - IEEE80211_ELEMID_TPC = 150, - IEEE80211_ELEMID_CCKM = 156, - IEEE80211_ELEMID_VENDOR = 221, /* vendor private */ -}; - -#define IEEE80211_CHANSWITCHANN_BYTES 5 -#define BITCTL_BUFD_MCAST 1 -#define BITCTL_BUFD_UCAST_AID_MASK ((u_int8_t)~(BITCTL_BUFD_MCAST)) -#define BITCTL_BUFD_UCAST_AID_SHIFT 1 - -struct ieee80211_tim_ie { - u_int8_t tim_ie; /* IEEE80211_ELEMID_TIM */ - u_int8_t tim_len; - u_int8_t tim_count; /* DTIM count */ - u_int8_t tim_period; /* DTIM period */ - u_int8_t tim_bitctl; /* bitmap control */ - u_int8_t tim_bitmap[1]; /* variable-length bitmap */ -} __packed; - -struct ieee80211_country_ie { - u_int8_t ie; /* IEEE80211_ELEMID_COUNTRY */ - u_int8_t len; - u_int8_t cc[3]; /* ISO CC+(I)ndoor/(O)utdoor */ - struct { - u_int8_t schan; /* starting channel */ - u_int8_t nchan; /* number channels */ - u_int8_t maxtxpwr; /* tx power cap */ - } __packed band[4]; /* up to 4 sub bands */ -} __packed; - -#define IEEE80211_CHALLENGE_LEN 128 - -#define IEEE80211_SUPPCHAN_LEN 26 - -#define IEEE80211_RATE_BASIC 0x80 -#define IEEE80211_RATE_VAL 0x7f - -/* EPR information element flags */ -#define IEEE80211_ERP_NON_ERP_PRESENT 0x01 -#define IEEE80211_ERP_USE_PROTECTION 0x02 -#define IEEE80211_ERP_LONG_PREAMBLE 0x04 - -/* Atheros private advanced capabilities info */ -#define ATHEROS_CAP_TURBO_PRIME 0x01 -#define ATHEROS_CAP_COMPRESSION 0x02 -#define ATHEROS_CAP_FAST_FRAME 0x04 -/* bits 3-6 reserved */ -#define ATHEROS_CAP_BOOST 0x80 - -#define ATH_OUI 0x7f0300 /* Atheros OUI */ -#define ATH_OUI_TYPE 0x01 -#define ATH_OUI_SUBTYPE 0x01 -#define ATH_OUI_VERSION 0x00 -#define ATH_OUI_TYPE_XR 0x03 -#define ATH_OUI_SUBTYPE_XR 0x01 -#define ATH_OUI_VER_XR 0x00 - -#define WPA_OUI 0xf25000 -#define WPA_OUI_TYPE 0x01 -#define WPA_VERSION 1 /* current supported version */ - -#define WPA_CSE_NULL 0x00 -#define WPA_CSE_WEP40 0x01 -#define WPA_CSE_TKIP 0x02 -#define WPA_CSE_CCMP 0x04 -#define WPA_CSE_WEP104 0x05 - -#define WPA_ASE_NONE 0x00 -#define WPA_ASE_8021X_UNSPEC 0x01 -#define WPA_ASE_8021X_PSK 0x02 - -#define RSN_OUI 0xac0f00 -#define RSN_VERSION 1 /* current supported version */ - -#define RSN_CSE_NULL 0x00 -#define RSN_CSE_WEP40 0x01 -#define RSN_CSE_TKIP 0x02 -#define RSN_CSE_WRAP 0x03 -#define RSN_CSE_CCMP 0x04 -#define RSN_CSE_WEP104 0x05 - -#define RSN_ASE_NONE 0x00 -#define RSN_ASE_8021X_UNSPEC 0x01 -#define RSN_ASE_8021X_PSK 0x02 - -#define RSN_CAP_PREAUTH 0x01 - -#define WME_OUI 0xf25000 -#define WME_OUI_TYPE 0x02 -#define WME_INFO_OUI_SUBTYPE 0x00 -#define WME_PARAM_OUI_SUBTYPE 0x01 -#define WME_VERSION 1 - -/* WME stream classes */ -#define WME_AC_BE 0 /* best effort */ -#define WME_AC_BK 1 /* background */ -#define WME_AC_VI 2 /* video */ -#define WME_AC_VO 3 /* voice */ - -/* - * AUTH management packets - * - * octet algo[2] - * octet seq[2] - * octet status[2] - * octet chal.id - * octet chal.length - * octet chal.text[253] - */ - -typedef u_int8_t *ieee80211_mgt_auth_t; - -#define IEEE80211_AUTH_ALGORITHM(auth) \ - ((auth)[0] | ((auth)[1] << 8)) -#define IEEE80211_AUTH_TRANSACTION(auth) \ - ((auth)[2] | ((auth)[3] << 8)) -#define IEEE80211_AUTH_STATUS(auth) \ - ((auth)[4] | ((auth)[5] << 8)) - -#define IEEE80211_AUTH_ALG_OPEN 0x0000 -#define IEEE80211_AUTH_ALG_SHARED 0x0001 -#define IEEE80211_AUTH_ALG_LEAP 0x0080 - -enum { - IEEE80211_AUTH_OPEN_REQUEST = 1, - IEEE80211_AUTH_OPEN_RESPONSE = 2, -}; - -enum { - IEEE80211_AUTH_SHARED_REQUEST = 1, - IEEE80211_AUTH_SHARED_CHALLENGE = 2, - IEEE80211_AUTH_SHARED_RESPONSE = 3, - IEEE80211_AUTH_SHARED_PASS = 4, -}; - -/* - * Reason codes - * - * Unlisted codes are reserved - */ - -enum { - IEEE80211_REASON_UNSPECIFIED = 1, - IEEE80211_REASON_AUTH_EXPIRE = 2, - IEEE80211_REASON_AUTH_LEAVE = 3, - IEEE80211_REASON_ASSOC_EXPIRE = 4, - IEEE80211_REASON_ASSOC_TOOMANY = 5, - IEEE80211_REASON_NOT_AUTHED = 6, - IEEE80211_REASON_NOT_ASSOCED = 7, - IEEE80211_REASON_ASSOC_LEAVE = 8, - IEEE80211_REASON_ASSOC_NOT_AUTHED = 9, - - IEEE80211_REASON_PWRCAP_UNACCEPTABLE = 10, - IEEE80211_REASON_SUPPCHAN_UNACCEPTABLE = 11, - IEEE80211_REASON_RSN_REQUIRED = 11, - IEEE80211_REASON_RSN_INCONSISTENT = 12, - IEEE80211_REASON_IE_INVALID = 13, - IEEE80211_REASON_MIC_FAILURE = 14, - - IEEE80211_STATUS_SUCCESS = 0, - IEEE80211_STATUS_UNSPECIFIED = 1, - IEEE80211_STATUS_CAPINFO = 10, - IEEE80211_STATUS_NOT_ASSOCED = 11, - IEEE80211_STATUS_OTHER = 12, - IEEE80211_STATUS_ALG = 13, - IEEE80211_STATUS_SEQUENCE = 14, - IEEE80211_STATUS_CHALLENGE = 15, - IEEE80211_STATUS_TIMEOUT = 16, - IEEE80211_STATUS_TOOMANY = 17, - IEEE80211_STATUS_BASIC_RATE = 18, - IEEE80211_STATUS_SP_REQUIRED = 19, - IEEE80211_STATUS_PBCC_REQUIRED = 20, - IEEE80211_STATUS_CA_REQUIRED = 21, - IEEE80211_STATUS_SM_REQUIRED = 22, - IEEE80211_STATUS_PWRCAP_UNACCEPTABLE = 23, - IEEE80211_STATUS_SUPPCHAN_UNACCEPTABLE = 24, - IEEE80211_STATUS_TOO_MANY_STATIONS = 22, - IEEE80211_STATUS_RATES = 23, - IEEE80211_STATUS_SHORTSLOT_REQUIRED = 25, - IEEE80211_STATUS_DSSSOFDM_REQUIRED = 26, -}; - -#define IEEE80211_WEP_KEYLEN 5 /* 40bit */ -#define IEEE80211_WEP_IVLEN 3 /* 24bit */ -#define IEEE80211_WEP_KIDLEN 1 /* 1 octet */ -#define IEEE80211_WEP_CRCLEN 4 /* CRC-32 */ -#define IEEE80211_WEP_NKID 4 /* number of key ids */ - -/* - * 802.11i defines an extended IV for use with non-WEP ciphers. - * When the EXTIV bit is set in the key id byte an additional - * 4 bytes immediately follow the IV for TKIP. For CCMP the - * EXTIV bit is likewise set but the 8 bytes represent the - * CCMP header rather than IV+extended-IV. - */ -#define IEEE80211_WEP_EXTIV 0x20 -#define IEEE80211_WEP_EXTIVLEN 4 /* extended IV length */ -#define IEEE80211_WEP_MICLEN 8 /* trailing MIC */ - -#define IEEE80211_CRC_LEN 4 - -/* - * Maximum acceptable MTU is: - * IEEE80211_MAX_LEN - WEP overhead - CRC - - * QoS overhead - RSN/WPA overhead - * Min is arbitrarily chosen > IEEE80211_MIN_LEN. The default - * mtu is Ethernet-compatible; it's set by ether_ifattach. - */ -#define IEEE80211_MTU_MAX 2290 -#define IEEE80211_MTU_MIN 32 - -#define IEEE80211_MAX_LEN (2300 + IEEE80211_CRC_LEN + \ - (IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN + IEEE80211_WEP_CRCLEN)) -#define IEEE80211_ACK_LEN \ - (sizeof(struct ieee80211_frame_ack) + IEEE80211_CRC_LEN) -#define IEEE80211_MIN_LEN \ - (sizeof(struct ieee80211_frame_min) + IEEE80211_CRC_LEN) - -/* - * The 802.11 spec says at most 2007 stations may be - * associated at once. For most APs this is way more - * than is feasible so we use a default of 128. This - * number may be overridden by the driver and/or by - * user configuration. - */ -#define IEEE80211_AID_MAX 2007 -#define IEEE80211_AID_DEF 128 - -#define IEEE80211_AID(b) ((b) &~ 0xc000) - -/* - * RTS frame length parameters. The default is specified in - * the 802.11 spec. The max may be wrong for jumbo frames. - */ -#define IEEE80211_RTS_DEFAULT 512 -#define IEEE80211_RTS_MIN 1 -#define IEEE80211_RTS_MAX 2346 - -/* - * Regulatory extension identifier for country IE. - */ -#define IEEE80211_REG_EXT_ID 201 - -/* - * IEEE 802.11 timer synchronization function (TSF) timestamp length - */ -#define IEEE80211_TSF_LEN 8 - -#endif /* _NET80211_IEEE80211_H_ */ diff --git a/package/network/services/hostapd/madwifi/net80211/ieee80211_crypto.h b/package/network/services/hostapd/madwifi/net80211/ieee80211_crypto.h deleted file mode 100644 index b34f359d0e..0000000000 --- a/package/network/services/hostapd/madwifi/net80211/ieee80211_crypto.h +++ /dev/null @@ -1,207 +0,0 @@ -/*- - * Copyright (c) 2001 Atsushi Onoe - * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * $Id: ieee80211_crypto.h 3068 2007-12-21 17:46:02Z mentor $ - */ -#ifndef _NET80211_IEEE80211_CRYPTO_H_ -#define _NET80211_IEEE80211_CRYPTO_H_ - -/* - * 802.11 protocol crypto-related definitions. - */ -#define IEEE80211_KEYBUF_SIZE 16 -#define IEEE80211_MICBUF_SIZE (8 + 8) /* space for both TX & RX keys */ -#define IEEE80211_TID_SIZE 17 /* total number of TIDs */ - -/* - * Old WEP-style key. Deprecated. - */ -struct ieee80211_wepkey { - u_int wk_len; /* key length in bytes */ - u_int8_t wk_key[IEEE80211_KEYBUF_SIZE]; -}; - -struct ieee80211_cipher; - -/* - * Crypto key state. There is sufficient room for all supported - * ciphers (see below). The underlying ciphers are handled - * separately through loadable cipher modules that register with - * the generic crypto support. A key has a reference to an instance - * of the cipher; any per-key state is hung off wk_private by the - * cipher when it is attached. Ciphers are automatically called - * to detach and cleanup any such state when the key is deleted. - * - * The generic crypto support handles encap/decap of cipher-related - * frame contents for both hardware- and software-based implementations. - * A key requiring software crypto support is automatically flagged and - * the cipher is expected to honor this and do the necessary work. - * Ciphers such as TKIP may also support mixed hardware/software - * encrypt/decrypt and MIC processing. - */ - -typedef u_int16_t ieee80211_keyix_t; - -/* XXX pack better? */ -/* XXX 48-bit rsc/tsc */ -struct ieee80211_key { - u_int8_t wk_keylen; /* key length in bytes */ - u_int8_t wk_flags; -#define IEEE80211_KEY_XMIT 0x01 /* key used for xmit */ -#define IEEE80211_KEY_RECV 0x02 /* key used for recv */ -#define IEEE80211_KEY_GROUP 0x04 /* key used for WPA group operation */ -#define IEEE80211_KEY_SWCRYPT 0x10 /* host-based encrypt/decrypt */ -#define IEEE80211_KEY_SWMIC 0x20 /* host-based enmic/demic */ - ieee80211_keyix_t wk_keyix; /* key index */ - u_int8_t wk_key[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE]; -#define wk_txmic wk_key+IEEE80211_KEYBUF_SIZE+0 /* XXX can't () right */ -#define wk_rxmic wk_key+IEEE80211_KEYBUF_SIZE+8 /* XXX can't () right */ - u_int64_t wk_keyrsc[IEEE80211_TID_SIZE]; /* key receive sequence counter */ - u_int64_t wk_keytsc; /* key transmit sequence counter */ - const struct ieee80211_cipher *wk_cipher; - void *wk_private; /* private cipher state */ -}; -#define IEEE80211_KEY_COMMON /* common flags passed in by apps */\ - (IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV | IEEE80211_KEY_GROUP) - -/* - * NB: these values are ordered carefully; there are lots of - * of implications in any reordering. In particular beware - * that 4 is not used to avoid conflicting with IEEE80211_F_PRIVACY. - */ -#define IEEE80211_CIPHER_WEP 0 -#define IEEE80211_CIPHER_TKIP 1 -#define IEEE80211_CIPHER_AES_OCB 2 -#define IEEE80211_CIPHER_AES_CCM 3 -#define IEEE80211_CIPHER_CKIP 5 -#define IEEE80211_CIPHER_NONE 6 /* pseudo value */ - -#define IEEE80211_CIPHER_MAX (IEEE80211_CIPHER_NONE + 1) - -#define IEEE80211_KEYIX_NONE ((ieee80211_keyix_t)-1) - -#if defined(__KERNEL__) || defined(_KERNEL) - -struct ieee80211com; -struct ieee80211vap; -struct ieee80211_node; -struct sk_buff; - -void ieee80211_crypto_attach(struct ieee80211com *); -void ieee80211_crypto_detach(struct ieee80211com *); -void ieee80211_crypto_vattach(struct ieee80211vap *); -void ieee80211_crypto_vdetach(struct ieee80211vap *); -int ieee80211_crypto_newkey(struct ieee80211vap *, int, int, - struct ieee80211_key *); -int ieee80211_crypto_delkey(struct ieee80211vap *, struct ieee80211_key *, - struct ieee80211_node *); -int ieee80211_crypto_setkey(struct ieee80211vap *, struct ieee80211_key *, - const u_int8_t macaddr[IEEE80211_ADDR_LEN], struct ieee80211_node *); -void ieee80211_crypto_delglobalkeys(struct ieee80211vap *); - -/* - * Template for a supported cipher. Ciphers register with the - * crypto code and are typically loaded as separate modules - * (the null cipher is always present). - * XXX may need refcnts - */ -struct ieee80211_cipher { - const char *ic_name; /* printable name */ - u_int ic_cipher; /* IEEE80211_CIPHER_* */ - u_int ic_header; /* size of privacy header (bytes) */ - u_int ic_trailer; /* size of privacy trailer (bytes) */ - u_int ic_miclen; /* size of mic trailer (bytes) */ - void *(*ic_attach)(struct ieee80211vap *, struct ieee80211_key *); - void (*ic_detach)(struct ieee80211_key *); - int (*ic_setkey)(struct ieee80211_key *); - int (*ic_encap)(struct ieee80211_key *, struct sk_buff *, u_int8_t); - int (*ic_decap)(struct ieee80211_key *, struct sk_buff *, int); - int (*ic_enmic)(struct ieee80211_key *, struct sk_buff *, int); - int (*ic_demic)(struct ieee80211_key *, struct sk_buff *, int, int); -}; -extern const struct ieee80211_cipher ieee80211_cipher_none; - -void ieee80211_crypto_register(const struct ieee80211_cipher *); -void ieee80211_crypto_unregister(const struct ieee80211_cipher *); -int ieee80211_crypto_available(struct ieee80211vap*, u_int); - -struct ieee80211_key *ieee80211_crypto_encap(struct ieee80211_node *, - struct sk_buff *); -struct ieee80211_key *ieee80211_crypto_decap(struct ieee80211_node *, - struct sk_buff *, int); - -/* - * Check and remove any MIC. - */ -static __inline int -ieee80211_crypto_demic(struct ieee80211vap *vap, struct ieee80211_key *k, - struct sk_buff *skb, int hdrlen, int force) -{ - const struct ieee80211_cipher *cip = k->wk_cipher; - return (cip->ic_miclen > 0 ? cip->ic_demic(k, skb, hdrlen, force) : 1); -} - -/* - * Add any MIC. - */ -static __inline int -ieee80211_crypto_enmic(struct ieee80211vap *vap, struct ieee80211_key *k, - struct sk_buff *skb, int force) -{ - const struct ieee80211_cipher *cip = k->wk_cipher; - return (cip->ic_miclen > 0 ? cip->ic_enmic(k, skb, force) : 1); -} - -/* - * Reset key state to an unused state. The crypto - * key allocation mechanism ensures other state (e.g. - * key data) is properly setup before a key is used. - */ -static __inline void -ieee80211_crypto_resetkey(struct ieee80211vap *vap, struct ieee80211_key *k, - ieee80211_keyix_t ix) -{ - k->wk_cipher = &ieee80211_cipher_none;; - k->wk_private = k->wk_cipher->ic_attach(vap, k); - k->wk_keyix = ix; - k->wk_flags = IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV; -} - -/* - * Crypto-related notification methods. - */ -void ieee80211_notify_replay_failure(struct ieee80211vap *, - const struct ieee80211_frame *, const struct ieee80211_key *, - u_int64_t rsc); -void ieee80211_notify_michael_failure(struct ieee80211vap *, - const struct ieee80211_frame *, ieee80211_keyix_t keyix); -#endif /* defined(__KERNEL__) || defined(_KERNEL) */ -#endif /* _NET80211_IEEE80211_CRYPTO_H_ */ diff --git a/package/network/services/hostapd/madwifi/net80211/ieee80211_ioctl.h b/package/network/services/hostapd/madwifi/net80211/ieee80211_ioctl.h deleted file mode 100644 index 204303b6ee..0000000000 --- a/package/network/services/hostapd/madwifi/net80211/ieee80211_ioctl.h +++ /dev/null @@ -1,715 +0,0 @@ -/*- - * Copyright (c) 2001 Atsushi Onoe - * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * $Id: ieee80211_ioctl.h 3314 2008-01-30 23:50:16Z mtaylor $ - */ -#ifndef _NET80211_IEEE80211_IOCTL_H_ -#define _NET80211_IEEE80211_IOCTL_H_ - -/* - * IEEE 802.11 ioctls. - */ -#include <net80211/_ieee80211.h> -#include <net80211/ieee80211.h> -#include <net80211/ieee80211_crypto.h> - -/* - * Per/node (station) statistics available when operating as an AP. - */ -struct ieee80211_nodestats { - u_int32_t ns_rx_data; /* rx data frames */ - u_int32_t ns_rx_mgmt; /* rx management frames */ - u_int32_t ns_rx_ctrl; /* rx control frames */ - u_int32_t ns_rx_ucast; /* rx unicast frames */ - u_int32_t ns_rx_mcast; /* rx multi/broadcast frames */ - u_int64_t ns_rx_bytes; /* rx data count (bytes) */ - u_int64_t ns_rx_beacons; /* rx beacon frames */ - u_int32_t ns_rx_proberesp; /* rx probe response frames */ - - u_int32_t ns_rx_dup; /* rx discard because it's a dup */ - u_int32_t ns_rx_noprivacy; /* rx w/ wep but privacy off */ - u_int32_t ns_rx_wepfail; /* rx wep processing failed */ - u_int32_t ns_rx_demicfail; /* rx demic failed */ - u_int32_t ns_rx_decap; /* rx decapsulation failed */ - u_int32_t ns_rx_defrag; /* rx defragmentation failed */ - u_int32_t ns_rx_disassoc; /* rx disassociation */ - u_int32_t ns_rx_deauth; /* rx deauthentication */ - u_int32_t ns_rx_decryptcrc; /* rx decrypt failed on crc */ - u_int32_t ns_rx_unauth; /* rx on unauthorized port */ - u_int32_t ns_rx_unencrypted; /* rx unecrypted w/ privacy */ - - u_int32_t ns_tx_data; /* tx data frames */ - u_int32_t ns_tx_mgmt; /* tx management frames */ - u_int32_t ns_tx_ucast; /* tx unicast frames */ - u_int32_t ns_tx_mcast; /* tx multi/broadcast frames */ - u_int64_t ns_tx_bytes; /* tx data count (bytes) */ - u_int32_t ns_tx_probereq; /* tx probe request frames */ - u_int32_t ns_tx_uapsd; /* tx on uapsd queue */ - - u_int32_t ns_tx_novlantag; /* tx discard due to no tag */ - u_int32_t ns_tx_vlanmismatch; /* tx discard due to of bad tag */ - - u_int32_t ns_tx_eosplost; /* uapsd EOSP retried out */ - - u_int32_t ns_ps_discard; /* ps discard due to of age */ - - u_int32_t ns_uapsd_triggers; /* uapsd triggers */ - - /* MIB-related state */ - u_int32_t ns_tx_assoc; /* [re]associations */ - u_int32_t ns_tx_assoc_fail; /* [re]association failures */ - u_int32_t ns_tx_auth; /* [re]authentications */ - u_int32_t ns_tx_auth_fail; /* [re]authentication failures*/ - u_int32_t ns_tx_deauth; /* deauthentications */ - u_int32_t ns_tx_deauth_code; /* last deauth reason */ - u_int32_t ns_tx_disassoc; /* disassociations */ - u_int32_t ns_tx_disassoc_code; /* last disassociation reason */ - u_int32_t ns_psq_drops; /* power save queue drops */ -}; - -/* - * Summary statistics. - */ -struct ieee80211_stats { - u_int32_t is_rx_badversion; /* rx frame with bad version */ - u_int32_t is_rx_tooshort; /* rx frame too short */ - u_int32_t is_rx_wrongbss; /* rx from wrong bssid */ - u_int32_t is_rx_dup; /* rx discard due to it's a dup */ - u_int32_t is_rx_wrongdir; /* rx w/ wrong direction */ - u_int32_t is_rx_mcastecho; /* rx discard due to of mcast echo */ - u_int32_t is_rx_mcastdisabled; /* rx discard due to of mcast disabled */ - u_int32_t is_rx_notassoc; /* rx discard due to sta !assoc */ - u_int32_t is_rx_noprivacy; /* rx w/ wep but privacy off */ - u_int32_t is_rx_unencrypted; /* rx w/o wep and privacy on */ - u_int32_t is_rx_wepfail; /* rx wep processing failed */ - u_int32_t is_rx_decap; /* rx decapsulation failed */ - u_int32_t is_rx_mgtdiscard; /* rx discard mgt frames */ - u_int32_t is_rx_ctl; /* rx discard ctrl frames */ - u_int32_t is_rx_beacon; /* rx beacon frames */ - u_int32_t is_rx_rstoobig; /* rx rate set truncated */ - u_int32_t is_rx_elem_missing; /* rx required element missing*/ - u_int32_t is_rx_elem_toobig; /* rx element too big */ - u_int32_t is_rx_elem_toosmall; /* rx element too small */ - u_int32_t is_rx_elem_unknown; /* rx element unknown */ - u_int32_t is_rx_badchan; /* rx frame w/ invalid chan */ - u_int32_t is_rx_chanmismatch; /* rx frame chan mismatch */ - u_int32_t is_rx_nodealloc; /* rx frame dropped */ - u_int32_t is_rx_ssidmismatch; /* rx frame ssid mismatch */ - u_int32_t is_rx_auth_unsupported;/* rx w/ unsupported auth alg */ - u_int32_t is_rx_auth_fail; /* rx sta auth failure */ - u_int32_t is_rx_auth_countermeasures;/* rx auth discard due to CM */ - u_int32_t is_rx_assoc_bss; /* rx assoc from wrong bssid */ - u_int32_t is_rx_assoc_notauth; /* rx assoc w/o auth */ - u_int32_t is_rx_assoc_capmismatch;/* rx assoc w/ cap mismatch */ - u_int32_t is_rx_assoc_norate; /* rx assoc w/ no rate match */ - u_int32_t is_rx_assoc_badwpaie; /* rx assoc w/ bad WPA IE */ - u_int32_t is_rx_assoc_badscie; /* rx assoc w/ bad SC IE */ - u_int32_t is_rx_deauth; /* rx deauthentication */ - u_int32_t is_rx_disassoc; /* rx disassociation */ - u_int32_t is_rx_badsubtype; /* rx frame w/ unknown subtype*/ - u_int32_t is_rx_nobuf; /* rx failed for lack of buf */ - u_int32_t is_rx_decryptcrc; /* rx decrypt failed on crc */ - u_int32_t is_rx_ahdemo_mgt; /* rx discard ahdemo mgt frame*/ - u_int32_t is_rx_bad_auth; /* rx bad auth request */ - u_int32_t is_rx_unauth; /* rx on unauthorized port */ - u_int32_t is_rx_badkeyid; /* rx w/ incorrect keyid */ - u_int32_t is_rx_ccmpreplay; /* rx seq# violation (CCMP) */ - u_int32_t is_rx_ccmpformat; /* rx format bad (CCMP) */ - u_int32_t is_rx_ccmpmic; /* rx MIC check failed (CCMP) */ - u_int32_t is_rx_tkipreplay; /* rx seq# violation (TKIP) */ - u_int32_t is_rx_tkipformat; /* rx format bad (TKIP) */ - u_int32_t is_rx_tkipmic; /* rx MIC check failed (TKIP) */ - u_int32_t is_rx_tkipicv; /* rx ICV check failed (TKIP) */ - u_int32_t is_rx_badcipher; /* rx failed due to of key type */ - u_int32_t is_rx_nocipherctx; /* rx failed due to key !setup */ - u_int32_t is_rx_acl; /* rx discard due to of acl policy */ - u_int32_t is_rx_ffcnt; /* rx fast frames */ - u_int32_t is_rx_badathtnl; /* driver key alloc failed */ - u_int32_t is_tx_nobuf; /* tx failed for lack of buf */ - u_int32_t is_tx_nonode; /* tx failed for no node */ - u_int32_t is_tx_unknownmgt; /* tx of unknown mgt frame */ - u_int32_t is_tx_badcipher; /* tx failed due to of key type */ - u_int32_t is_tx_nodefkey; /* tx failed due to no defkey */ - u_int32_t is_tx_noheadroom; /* tx failed due to no space */ - u_int32_t is_tx_ffokcnt; /* tx fast frames sent success */ - u_int32_t is_tx_fferrcnt; /* tx fast frames sent success */ - u_int32_t is_scan_active; /* active scans started */ - u_int32_t is_scan_passive; /* passive scans started */ - u_int32_t is_node_timeout; /* nodes timed out inactivity */ - u_int32_t is_node_fdisassoc; /* forced node disassociation */ - u_int32_t is_crypto_nomem; /* no memory for crypto ctx */ - u_int32_t is_crypto_tkip; /* tkip crypto done in s/w */ - u_int32_t is_crypto_tkipenmic; /* tkip en-MIC done in s/w */ - u_int32_t is_crypto_tkipdemic; /* tkip de-MIC done in s/w */ - u_int32_t is_crypto_tkipcm; /* tkip counter measures */ - u_int32_t is_crypto_ccmp; /* ccmp crypto done in s/w */ - u_int32_t is_crypto_wep; /* wep crypto done in s/w */ - u_int32_t is_crypto_setkey_cipher;/* cipher rejected key */ - u_int32_t is_crypto_setkey_nokey;/* no key index for setkey */ - u_int32_t is_crypto_delkey; /* driver key delete failed */ - u_int32_t is_crypto_badcipher; /* unknown cipher */ - u_int32_t is_crypto_nocipher; /* cipher not available */ - u_int32_t is_crypto_attachfail; /* cipher attach failed */ - u_int32_t is_crypto_swfallback; /* cipher fallback to s/w */ - u_int32_t is_crypto_keyfail; /* driver key alloc failed */ - u_int32_t is_crypto_enmicfail; /* en-MIC failed */ - u_int32_t is_ibss_capmismatch; /* merge failed-cap mismatch */ - u_int32_t is_ibss_norate; /* merge failed-rate mismatch */ - u_int32_t is_ps_unassoc; /* ps-poll for unassoc. sta */ - u_int32_t is_ps_badaid; /* ps-poll w/ incorrect aid */ - u_int32_t is_ps_qempty; /* ps-poll w/ nothing to send */ -}; - -/* - * Max size of optional information elements. We artificially - * constrain this; it's limited only by the max frame size (and - * the max parameter size of the wireless extensions). - */ -#define IEEE80211_MAX_OPT_IE 256 - -/* - * WPA/RSN get/set key request. Specify the key/cipher - * type and whether the key is to be used for sending and/or - * receiving. The key index should be set only when working - * with global keys (use IEEE80211_KEYIX_NONE for ``no index''). - * Otherwise a unicast/pairwise key is specified by the bssid - * (on a station) or mac address (on an ap). They key length - * must include any MIC key data; otherwise it should be no - more than IEEE80211_KEYBUF_SIZE. - */ -struct ieee80211req_key { - u_int8_t ik_type; /* key/cipher type */ - u_int8_t ik_pad; - ieee80211_keyix_t ik_keyix; /* key index */ - u_int8_t ik_keylen; /* key length in bytes */ - u_int8_t ik_flags; -/* NB: IEEE80211_KEY_XMIT and IEEE80211_KEY_RECV defined elsewhere */ -#define IEEE80211_KEY_DEFAULT 0x80 /* default xmit key */ - u_int8_t ik_macaddr[IEEE80211_ADDR_LEN]; - u_int64_t ik_keyrsc; /* key receive sequence counter */ - u_int64_t ik_keytsc; /* key transmit sequence counter */ - u_int8_t ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE]; -}; - -/* - * Delete a key either by index or address. Set the index - * to IEEE80211_KEYIX_NONE when deleting a unicast key. - */ -struct ieee80211req_del_key { - /* NB: This is different to ieee80211_keyix_t, but this is OK as - * values are unique over the low order bits. */ - u_int8_t idk_keyix; /* key index */ - u_int8_t idk_macaddr[IEEE80211_ADDR_LEN]; -}; - -/* - * MLME state manipulation request. IEEE80211_MLME_ASSOC - * only makes sense when operating as a station. The other - * requests can be used when operating as a station or an - * ap (to effect a station). - */ -struct ieee80211req_mlme { - u_int8_t im_op; /* operation to perform */ -#define IEEE80211_MLME_ASSOC 1 /* associate station */ -#define IEEE80211_MLME_DISASSOC 2 /* disassociate station */ -#define IEEE80211_MLME_DEAUTH 3 /* deauthenticate station */ -#define IEEE80211_MLME_AUTHORIZE 4 /* authorize station */ -#define IEEE80211_MLME_UNAUTHORIZE 5 /* unauthorize station */ -#define IEEE80211_MLME_CLEAR_STATS 6 /* clear station statistic */ - u_int8_t im_ssid_len; /* length of optional ssid */ - u_int16_t im_reason; /* 802.11 reason code */ - u_int8_t im_macaddr[IEEE80211_ADDR_LEN]; - u_int8_t im_ssid[IEEE80211_NWID_LEN]; -}; - -/* - * MAC ACL operations. - */ -enum { - IEEE80211_MACCMD_POLICY_OPEN = 0, /* set policy: no ACLs */ - IEEE80211_MACCMD_POLICY_ALLOW = 1, /* set policy: allow traffic */ - IEEE80211_MACCMD_POLICY_DENY = 2, /* set policy: deny traffic */ - IEEE80211_MACCMD_FLUSH = 3, /* flush ACL database */ - IEEE80211_MACCMD_DETACH = 4, /* detach ACL policy */ -}; - -/* - * Set the active channel list. Note this list is - * intersected with the available channel list in - * calculating the set of channels actually used in - * scanning. - */ -struct ieee80211req_chanlist { - u_int8_t ic_channels[IEEE80211_CHAN_BYTES]; -}; - -/* - * Get the active channel list info. - */ -struct ieee80211req_chaninfo { - u_int ic_nchans; - struct ieee80211_channel ic_chans[IEEE80211_CHAN_MAX]; -}; - -/* - * Retrieve the WPA/RSN information element for an associated station. - */ -struct ieee80211req_wpaie { - u_int8_t wpa_macaddr[IEEE80211_ADDR_LEN]; - u_int8_t wpa_ie[IEEE80211_MAX_OPT_IE]; - u_int8_t rsn_ie[IEEE80211_MAX_OPT_IE]; -}; - -/* - * Retrieve per-node statistics. - */ -struct ieee80211req_sta_stats { - union { - /* NB: explicitly force 64-bit alignment */ - u_int8_t macaddr[IEEE80211_ADDR_LEN]; - u_int64_t pad; - } is_u; - struct ieee80211_nodestats is_stats; -}; - -/* - * Station information block; the mac address is used - * to retrieve other data like stats, unicast key, etc. - */ -struct ieee80211req_sta_info { - u_int16_t isi_len; /* length (mult of 4) */ - u_int16_t isi_freq; /* MHz */ - u_int16_t isi_flags; /* channel flags */ - u_int16_t isi_state; /* state flags */ - u_int8_t isi_authmode; /* authentication algorithm */ - u_int8_t isi_rssi; - int8_t isi_noise; - u_int16_t isi_capinfo; /* capabilities */ - u_int8_t isi_athflags; /* Atheros capabilities */ - u_int8_t isi_erp; /* ERP element */ - u_int8_t isi_macaddr[IEEE80211_ADDR_LEN]; - u_int8_t isi_nrates; /* negotiated rates */ - u_int8_t isi_rates[IEEE80211_RATE_MAXSIZE]; - u_int8_t isi_txrate; /* index to isi_rates[] */ - u_int16_t isi_ie_len; /* IE length */ - u_int16_t isi_associd; /* assoc response */ - u_int16_t isi_txpower; /* current tx power */ - u_int16_t isi_vlan; /* vlan tag */ - u_int16_t isi_txseqs[17]; /* seq to be transmitted */ - u_int16_t isi_rxseqs[17]; /* seq previous for qos frames*/ - u_int16_t isi_inact; /* inactivity timer */ - u_int8_t isi_uapsd; /* UAPSD queues */ - u_int8_t isi_opmode; /* sta operating mode */ - - /* XXX frag state? */ - /* variable length IE data */ -}; - -enum { - IEEE80211_STA_OPMODE_NORMAL, - IEEE80211_STA_OPMODE_XR -}; - -/* - * Retrieve per-station information; to retrieve all - * specify a mac address of ff:ff:ff:ff:ff:ff. - */ -struct ieee80211req_sta_req { - union { - /* NB: explicitly force 64-bit alignment */ - u_int8_t macaddr[IEEE80211_ADDR_LEN]; - u_int64_t pad; - } is_u; - struct ieee80211req_sta_info info[1]; /* variable length */ -}; - -/* - * Get/set per-station tx power cap. - */ -struct ieee80211req_sta_txpow { - u_int8_t it_macaddr[IEEE80211_ADDR_LEN]; - u_int8_t it_txpow; -}; - -/* - * WME parameters are set and return using i_val and i_len. - * i_val holds the value itself. i_len specifies the AC - * and, as appropriate, then high bit specifies whether the - * operation is to be applied to the BSS or ourself. - */ -#define IEEE80211_WMEPARAM_SELF 0x0000 /* parameter applies to self */ -#define IEEE80211_WMEPARAM_BSS 0x8000 /* parameter applies to BSS */ -#define IEEE80211_WMEPARAM_VAL 0x7fff /* parameter value */ - -/* - * Scan result data returned for IEEE80211_IOC_SCAN_RESULTS. - */ -struct ieee80211req_scan_result { - u_int16_t isr_len; /* length (mult of 4) */ - u_int16_t isr_freq; /* MHz */ - u_int16_t isr_flags; /* channel flags */ - u_int8_t isr_noise; - u_int8_t isr_rssi; - u_int8_t isr_intval; /* beacon interval */ - u_int16_t isr_capinfo; /* capabilities */ - u_int8_t isr_erp; /* ERP element */ - u_int8_t isr_bssid[IEEE80211_ADDR_LEN]; - u_int8_t isr_nrates; - u_int8_t isr_rates[IEEE80211_RATE_MAXSIZE]; - u_int8_t isr_ssid_len; /* SSID length */ - u_int8_t isr_ie_len; /* IE length */ - u_int8_t isr_pad[5]; - /* variable length SSID followed by IE data */ -}; - -#ifdef __FreeBSD__ -/* - * FreeBSD-style ioctls. - */ -/* the first member must be matched with struct ifreq */ -struct ieee80211req { - char i_name[IFNAMSIZ]; /* if_name, e.g. "wi0" */ - u_int16_t i_type; /* req type */ - int16_t i_val; /* Index or simple value */ - int16_t i_len; /* Index or simple value */ - void *i_data; /* Extra data */ -}; -#define SIOCS80211 _IOW('i', 234, struct ieee80211req) -#define SIOCG80211 _IOWR('i', 235, struct ieee80211req) -#define SIOCG80211STATS _IOWR('i', 236, struct ifreq) -#define SIOC80211IFCREATE _IOWR('i', 237, struct ifreq) -#define SIOC80211IFDESTROY _IOW('i', 238, struct ifreq) - -#define IEEE80211_IOC_SSID 1 -#define IEEE80211_IOC_NUMSSIDS 2 -#define IEEE80211_IOC_WEP 3 -#define IEEE80211_WEP_NOSUP -1 -#define IEEE80211_WEP_OFF 0 -#define IEEE80211_WEP_ON 1 -#define IEEE80211_WEP_MIXED 2 -#define IEEE80211_IOC_WEPKEY 4 -#define IEEE80211_IOC_NUMWEPKEYS 5 -#define IEEE80211_IOC_WEPTXKEY 6 -#define IEEE80211_IOC_AUTHMODE 7 -#define IEEE80211_IOC_STATIONNAME 8 -#define IEEE80211_IOC_CHANNEL 9 -#define IEEE80211_IOC_POWERSAVE 10 -#define IEEE80211_POWERSAVE_NOSUP -1 -#define IEEE80211_POWERSAVE_OFF 0 -#define IEEE80211_POWERSAVE_CAM 1 -#define IEEE80211_POWERSAVE_PSP 2 -#define IEEE80211_POWERSAVE_PSP_CAM 3 -#define IEEE80211_POWERSAVE_ON IEEE80211_POWERSAVE_CAM -#define IEEE80211_IOC_POWERSAVESLEEP 11 -#define IEEE80211_IOC_RTSTHRESHOLD 12 -#define IEEE80211_IOC_PROTMODE 13 -#define IEEE80211_PROTMODE_OFF 0 -#define IEEE80211_PROTMODE_CTS 1 -#define IEEE80211_PROTMODE_RTSCTS 2 -#define IEEE80211_IOC_TXPOWER 14 /* global tx power limit */ -#define IEEE80211_IOC_BSSID 15 -#define IEEE80211_IOC_ROAMING 16 /* roaming mode */ -#define IEEE80211_IOC_PRIVACY 17 /* privacy invoked */ -#define IEEE80211_IOC_DROPUNENCRYPTED 18 /* discard unencrypted frames */ -#define IEEE80211_IOC_WPAKEY 19 -#define IEEE80211_IOC_DELKEY 20 -#define IEEE80211_IOC_MLME 21 -#define IEEE80211_IOC_OPTIE 22 /* optional info. element */ -#define IEEE80211_IOC_SCAN_REQ 23 -#define IEEE80211_IOC_SCAN_RESULTS 24 -#define IEEE80211_IOC_COUNTERMEASURES 25 /* WPA/TKIP countermeasures */ -#define IEEE80211_IOC_WPA 26 /* WPA mode (0,1,2) */ -#define IEEE80211_IOC_CHANLIST 27 /* channel list */ -#define IEEE80211_IOC_WME 28 /* WME mode (on, off) */ -#define IEEE80211_IOC_HIDESSID 29 /* hide SSID mode (on, off) */ -#define IEEE80211_IOC_APBRIDGE 30 /* AP inter-sta bridging */ -#define IEEE80211_IOC_MCASTCIPHER 31 /* multicast/default cipher */ -#define IEEE80211_IOC_MCASTKEYLEN 32 /* multicast key length */ -#define IEEE80211_IOC_UCASTCIPHERS 33 /* unicast cipher suites */ -#define IEEE80211_IOC_UCASTCIPHER 34 /* unicast cipher */ -#define IEEE80211_IOC_UCASTKEYLEN 35 /* unicast key length */ -#define IEEE80211_IOC_DRIVER_CAPS 36 /* driver capabilities */ -#define IEEE80211_IOC_KEYMGTALGS 37 /* key management algorithms */ -#define IEEE80211_IOC_RSNCAPS 38 /* RSN capabilities */ -#define IEEE80211_IOC_WPAIE 39 /* WPA information element */ -#define IEEE80211_IOC_STA_STATS 40 /* per-station statistics */ -#define IEEE80211_IOC_MACCMD 41 /* MAC ACL operation */ -#define IEEE80211_IOC_TXPOWMAX 43 /* max tx power for channel */ -#define IEEE80211_IOC_STA_TXPOW 44 /* per-station tx power limit */ -#define IEEE80211_IOC_STA_INFO 45 /* station/neighbor info */ -#define IEEE80211_IOC_WME_CWMIN 46 /* WME: ECWmin */ -#define IEEE80211_IOC_WME_CWMAX 47 /* WME: ECWmax */ -#define IEEE80211_IOC_WME_AIFS 48 /* WME: AIFSN */ -#define IEEE80211_IOC_WME_TXOPLIMIT 49 /* WME: txops limit */ -#define IEEE80211_IOC_WME_ACM 50 /* WME: ACM (bss only) */ -#define IEEE80211_IOC_WME_ACKPOLICY 51 /* WME: ACK policy (!bss only)*/ -#define IEEE80211_IOC_DTIM_PERIOD 52 /* DTIM period (beacons) */ -#define IEEE80211_IOC_BEACON_INTERVAL 53 /* beacon interval (ms) */ -#define IEEE80211_IOC_ADDMAC 54 /* add sta to MAC ACL table */ -#define IEEE80211_IOC_SETMAC 55 /* set interface wds mac addr */ -#define IEEE80211_IOC_FF 56 /* ATH fast frames (on, off) */ -#define IEEE80211_IOC_TURBOP 57 /* ATH turbo' (on, off) */ -#define IEEE80211_IOC_APPIEBUF 58 /* IE in the management frame */ -#define IEEE80211_IOC_FILTERFRAME 59 /* management frame filter */ - -/* - * Scan result data returned for IEEE80211_IOC_SCAN_RESULTS. - */ -struct ieee80211req_scan_result { - u_int16_t isr_len; /* length (mult of 4) */ - u_int16_t isr_freq; /* MHz */ - u_int16_t isr_flags; /* channel flags */ - u_int8_t isr_noise; - u_int8_t isr_rssi; - u_int8_t isr_intval; /* beacon interval */ - u_int16_t isr_capinfo; /* capabilities */ - u_int8_t isr_erp; /* ERP element */ - u_int8_t isr_bssid[IEEE80211_ADDR_LEN]; - u_int8_t isr_nrates; - u_int8_t isr_rates[IEEE80211_RATE_MAXSIZE]; - u_int8_t isr_ssid_len; /* SSID length */ - u_int8_t isr_ie_len; /* IE length */ - u_int8_t isr_pad[5]; - /* variable length SSID followed by IE data */ -}; - -#endif /* __FreeBSD__ */ - -#ifdef __linux__ -/* - * Wireless Extensions API, private ioctl interfaces. - * - * NB: Even-numbered ioctl numbers have set semantics and are privileged! - * (regardless of the incorrect comment in wireless.h!) - */ -#ifdef __KERNEL__ -#include <linux/if.h> -#endif -/* The maximum size of a iwpriv structure is IW_PRIV_SIZE_MASK, which was - * exceeded for some time by chaninfo ioctl. These macros change the size - * encoding for anything larger than IW_PRIV_SIZE_MASK from bytes to 4-byte - * multiples so that the padded size fits under IW_PRIV_SIZE_MASK. */ -#define IW_PRIV_BLOB_LENGTH_ENCODING(_SIZE) \ - (((_SIZE) == ((_SIZE) & IW_PRIV_SIZE_MASK)) ? \ - (_SIZE) : \ - (((_SIZE) / sizeof(uint32_t)) + \ - (((_SIZE) == (((_SIZE) / sizeof(uint32_t)) * sizeof(int))) ? \ - 0 : 1))) -#define IW_PRIV_BLOB_TYPE_ENCODING(_SIZE) \ - (((_SIZE) == ((_SIZE) & IW_PRIV_SIZE_MASK)) ? \ - (IW_PRIV_TYPE_BYTE | (_SIZE)) : \ - (IW_PRIV_TYPE_INT | IW_PRIV_BLOB_LENGTH_ENCODING((_SIZE)))) - -#define IEEE80211_IOCTL_SETPARAM (SIOCIWFIRSTPRIV+0) -#define IEEE80211_IOCTL_GETPARAM (SIOCIWFIRSTPRIV+1) -#define IEEE80211_IOCTL_SETMODE (SIOCIWFIRSTPRIV+2) -#define IEEE80211_IOCTL_GETMODE (SIOCIWFIRSTPRIV+3) -#define IEEE80211_IOCTL_SETWMMPARAMS (SIOCIWFIRSTPRIV+4) -#define IEEE80211_IOCTL_GETWMMPARAMS (SIOCIWFIRSTPRIV+5) -#define IEEE80211_IOCTL_SETCHANLIST (SIOCIWFIRSTPRIV+6) -#define IEEE80211_IOCTL_GETCHANLIST (SIOCIWFIRSTPRIV+7) -#define IEEE80211_IOCTL_CHANSWITCH (SIOCIWFIRSTPRIV+8) -#define IEEE80211_IOCTL_GET_APPIEBUF (SIOCIWFIRSTPRIV+9) -#define IEEE80211_IOCTL_SET_APPIEBUF (SIOCIWFIRSTPRIV+10) -#define IEEE80211_IOCTL_READREG (SIOCIWFIRSTPRIV+11) -#define IEEE80211_IOCTL_FILTERFRAME (SIOCIWFIRSTPRIV+12) -#define IEEE80211_IOCTL_GETCHANINFO (SIOCIWFIRSTPRIV+13) -#define IEEE80211_IOCTL_SETOPTIE (SIOCIWFIRSTPRIV+14) -#define IEEE80211_IOCTL_GETOPTIE (SIOCIWFIRSTPRIV+15) -#define IEEE80211_IOCTL_SETMLME (SIOCIWFIRSTPRIV+16) -#define IEEE80211_IOCTL_RADAR (SIOCIWFIRSTPRIV+17) -#define IEEE80211_IOCTL_SETKEY (SIOCIWFIRSTPRIV+18) -#define IEEE80211_IOCTL_WRITEREG (SIOCIWFIRSTPRIV+19) -#define IEEE80211_IOCTL_DELKEY (SIOCIWFIRSTPRIV+20) -#define IEEE80211_IOCTL_HALMAP (SIOCIWFIRSTPRIV+21) -#define IEEE80211_IOCTL_ADDMAC (SIOCIWFIRSTPRIV+22) -#define IEEE80211_IOCTL_DELMAC (SIOCIWFIRSTPRIV+24) -#define IEEE80211_IOCTL_WDSADDMAC (SIOCIWFIRSTPRIV+25) -#define IEEE80211_IOCTL_WDSSETMAC (SIOCIWFIRSTPRIV+26) -#define IEEE80211_IOCTL_KICKMAC (SIOCIWFIRSTPRIV+30) -#define IEEE80211_IOCTL_SETSCANLIST (SIOCIWFIRSTPRIV+31) - -enum { - IEEE80211_WMMPARAMS_CWMIN = 1, - IEEE80211_WMMPARAMS_CWMAX = 2, - IEEE80211_WMMPARAMS_AIFS = 3, - IEEE80211_WMMPARAMS_TXOPLIMIT = 4, - IEEE80211_WMMPARAMS_ACM = 5, - IEEE80211_WMMPARAMS_NOACKPOLICY = 6, -}; -enum { - IEEE80211_PARAM_TURBO = 1, /* turbo mode */ - IEEE80211_PARAM_MODE = 2, /* phy mode (11a, 11b, etc.) */ - IEEE80211_PARAM_AUTHMODE = 3, /* authentication mode */ - IEEE80211_PARAM_PROTMODE = 4, /* 802.11g protection */ - IEEE80211_PARAM_MCASTCIPHER = 5, /* multicast/default cipher */ - IEEE80211_PARAM_MCASTKEYLEN = 6, /* multicast key length */ - IEEE80211_PARAM_UCASTCIPHERS = 7, /* unicast cipher suites */ - IEEE80211_PARAM_UCASTCIPHER = 8, /* unicast cipher */ - IEEE80211_PARAM_UCASTKEYLEN = 9, /* unicast key length */ - IEEE80211_PARAM_WPA = 10, /* WPA mode (0,1,2) */ - IEEE80211_PARAM_ROAMING = 12, /* roaming mode */ - IEEE80211_PARAM_PRIVACY = 13, /* privacy invoked */ - IEEE80211_PARAM_COUNTERMEASURES = 14, /* WPA/TKIP countermeasures */ - IEEE80211_PARAM_DROPUNENCRYPTED = 15, /* discard unencrypted frames */ - IEEE80211_PARAM_DRIVER_CAPS = 16, /* driver capabilities */ - IEEE80211_PARAM_MACCMD = 17, /* MAC ACL operation */ - IEEE80211_PARAM_WMM = 18, /* WMM mode (on, off) */ - IEEE80211_PARAM_HIDESSID = 19, /* hide SSID mode (on, off) */ - IEEE80211_PARAM_APBRIDGE = 20, /* AP inter-sta bridging */ - IEEE80211_PARAM_KEYMGTALGS = 21, /* key management algorithms */ - IEEE80211_PARAM_RSNCAPS = 22, /* RSN capabilities */ - IEEE80211_PARAM_INACT = 23, /* station inactivity timeout */ - IEEE80211_PARAM_INACT_AUTH = 24, /* station auth inact timeout */ - IEEE80211_PARAM_INACT_INIT = 25, /* station init inact timeout */ - IEEE80211_PARAM_ABOLT = 26, /* Atheros Adv. Capabilities */ - IEEE80211_PARAM_INACT_TICK = 27, /* station inactivity timer tick (seconds) */ - IEEE80211_PARAM_DTIM_PERIOD = 28, /* DTIM period (beacons) */ - IEEE80211_PARAM_BEACON_INTERVAL = 29, /* beacon interval (ms) */ - IEEE80211_PARAM_DOTH = 30, /* 11.h is on/off */ - IEEE80211_PARAM_PWRTARGET = 31, /* Current Channel Pwr Constraint */ - IEEE80211_PARAM_GENREASSOC = 32, /* Generate a reassociation request */ - IEEE80211_PARAM_COMPRESSION = 33, /* compression */ - IEEE80211_PARAM_FF = 34, /* fast frames support */ - IEEE80211_PARAM_XR = 35, /* XR support */ - IEEE80211_PARAM_BURST = 36, /* burst mode */ - IEEE80211_PARAM_PUREG = 37, /* pure 11g (no 11b stations) */ - IEEE80211_PARAM_AR = 38, /* AR support */ - IEEE80211_PARAM_WDS = 39, /* Enable 4 address processing */ - IEEE80211_PARAM_BGSCAN = 40, /* bg scanning (on, off) */ - IEEE80211_PARAM_BGSCAN_IDLE = 41, /* bg scan idle threshold */ - IEEE80211_PARAM_BGSCAN_INTERVAL = 42, /* bg scan interval */ - IEEE80211_PARAM_MCAST_RATE = 43, /* Multicast Tx Rate */ - IEEE80211_PARAM_COVERAGE_CLASS = 44, /* coverage class */ - IEEE80211_PARAM_COUNTRY_IE = 45, /* enable country IE */ - IEEE80211_PARAM_SCANVALID = 46, /* scan cache valid threshold */ - IEEE80211_PARAM_ROAM_RSSI_11A = 47, /* rssi threshold in 11a */ - IEEE80211_PARAM_ROAM_RSSI_11B = 48, /* rssi threshold in 11b */ - IEEE80211_PARAM_ROAM_RSSI_11G = 49, /* rssi threshold in 11g */ - IEEE80211_PARAM_ROAM_RATE_11A = 50, /* tx rate threshold in 11a */ - IEEE80211_PARAM_ROAM_RATE_11B = 51, /* tx rate threshold in 11b */ - IEEE80211_PARAM_ROAM_RATE_11G = 52, /* tx rate threshold in 11g */ - IEEE80211_PARAM_UAPSDINFO = 53, /* value for qos info field */ - IEEE80211_PARAM_SLEEP = 54, /* force sleep/wake */ - IEEE80211_PARAM_QOSNULL = 55, /* force sleep/wake */ - IEEE80211_PARAM_PSPOLL = 56, /* force ps-poll generation (sta only) */ - IEEE80211_PARAM_EOSPDROP = 57, /* force uapsd EOSP drop (ap only) */ - IEEE80211_PARAM_MARKDFS = 58, /* mark a dfs interference channel when found */ - IEEE80211_PARAM_REGCLASS = 59, /* enable regclass ids in country IE */ - IEEE80211_PARAM_DROPUNENC_EAPOL = 60, /* drop unencrypted eapol frames */ - IEEE80211_PARAM_SHPREAMBLE = 61, /* Short Preamble */ - IEEE80211_PARAM_DUMPREGS = 62, /* Pretty printed dump of Atheros hardware registers */ - IEEE80211_PARAM_DOTH_ALGORITHM = 63, /* spectrum management algorithm */ - IEEE80211_PARAM_DOTH_MINCOM = 64, /* minimum number of common channels */ - IEEE80211_PARAM_DOTH_SLCG = 65, /* permil of Stations Lost per Channel Gained */ - IEEE80211_PARAM_DOTH_SLDG = 66, /* permil of Stations Lost per rssi Db Gained */ - IEEE80211_PARAM_TXCONT = 67, /* continuous transmit mode (boolean) */ - IEEE80211_PARAM_TXCONT_RATE = 68, /* continuous transmit mode data rate (in mbit/sec) - will use closest match from current rate table */ - IEEE80211_PARAM_TXCONT_POWER = 69, /* power level in units of 0.5dBm */ - IEEE80211_PARAM_DFS_TESTMODE = 70, /* do not perform DFS actions (i.e. markng DFS and channel change on interference), just report them via debug. */ - IEEE80211_PARAM_DFS_CACTIME = 71, /* how long do we wait for chan availability - scans ? - FCC requires 60s, so that is the default. */ - IEEE80211_PARAM_DFS_EXCLPERIOD = 72, /* DFS no-occupancy limit - how long do we stay - off a channel once radar is detected? - FCC requires 30m, so that is the default. */ - IEEE80211_PARAM_BEACON_MISS_THRESH = 73, /* Beacon miss threshold (in beacons) */ - IEEE80211_PARAM_BEACON_MISS_THRESH_MS = 74, /* Beacon miss threshold (in ms) */ - IEEE80211_PARAM_MAXRATE = 75, /* Maximum rate (by table index) */ - IEEE80211_PARAM_MINRATE = 76, /* Minimum rate (by table index) */ - IEEE80211_PARAM_PROTMODE_RSSI = 77, /* RSSI Threshold for enabling protection mode */ - IEEE80211_PARAM_PROTMODE_TIMEOUT = 78, /* Timeout for expiring protection mode */ - IEEE80211_PARAM_BGSCAN_THRESH = 79, /* bg scan rssi threshold */ - IEEE80211_PARAM_RSSI_DIS_THR = 80, /* rssi threshold for disconnection */ - IEEE80211_PARAM_RSSI_DIS_COUNT = 81, /* counter for rssi threshold */ - IEEE80211_PARAM_WDS_SEP = 82, /* move wds stations into separate interfaces */ - IEEE80211_PARAM_MAXASSOC = 83, /* maximum associated stations */ - IEEE80211_PARAM_PROBEREQ = 84, /* enable handling of probe requests */ - IEEE80211_PARAM_BEACON_TXP = 85, /* set beacon tx power */ -}; - -#define SIOCG80211STATS (SIOCDEVPRIVATE+2) -/* NB: require in+out parameters so cannot use wireless extensions, yech */ -#define IEEE80211_IOCTL_GETKEY (SIOCDEVPRIVATE+3) -#define IEEE80211_IOCTL_GETWPAIE (SIOCDEVPRIVATE+4) -#define IEEE80211_IOCTL_STA_STATS (SIOCDEVPRIVATE+5) -#define IEEE80211_IOCTL_STA_INFO (SIOCDEVPRIVATE+6) -#define SIOC80211IFCREATE (SIOCDEVPRIVATE+7) -#define SIOC80211IFDESTROY (SIOCDEVPRIVATE+8) -#define IEEE80211_IOCTL_SCAN_RESULTS (SIOCDEVPRIVATE+9) - -struct ieee80211_clone_params { - char icp_name[IFNAMSIZ]; /* device name */ - u_int16_t icp_opmode; /* operating mode */ - u_int16_t icp_flags; /* see below */ -#define IEEE80211_CLONE_BSSID 0x0001 /* allocate unique mac/bssid */ -#define IEEE80211_NO_STABEACONS 0x0002 /* Do not setup the station beacon timers */ -}; - -/* APPIEBUF related definitions */ - -/* Management frame type to which application IE is added */ -enum { - IEEE80211_APPIE_FRAME_BEACON = 0, - IEEE80211_APPIE_FRAME_PROBE_REQ = 1, - IEEE80211_APPIE_FRAME_PROBE_RESP = 2, - IEEE80211_APPIE_FRAME_ASSOC_REQ = 3, - IEEE80211_APPIE_FRAME_ASSOC_RESP = 4, - IEEE80211_APPIE_NUM_OF_FRAME = 5 -}; - -struct ieee80211req_getset_appiebuf { - u_int32_t app_frmtype; /* management frame type for which buffer is added */ - u_int32_t app_buflen; /* application-supplied buffer length */ - u_int8_t app_buf[0]; /* application-supplied IE(s) */ -}; - -/* Flags ORed by application to set filter for receiving management frames */ -enum { - IEEE80211_FILTER_TYPE_BEACON = 1<<0, - IEEE80211_FILTER_TYPE_PROBE_REQ = 1<<1, - IEEE80211_FILTER_TYPE_PROBE_RESP = 1<<2, - IEEE80211_FILTER_TYPE_ASSOC_REQ = 1<<3, - IEEE80211_FILTER_TYPE_ASSOC_RESP = 1<<4, - IEEE80211_FILTER_TYPE_AUTH = 1<<5, - IEEE80211_FILTER_TYPE_DEAUTH = 1<<6, - IEEE80211_FILTER_TYPE_DISASSOC = 1<<7, - IEEE80211_FILTER_TYPE_ALL = 0xFF /* used to check the valid filter bits */ -}; - -struct ieee80211req_set_filter { - u_int32_t app_filterype; /* management frame filter type */ -}; - - -#endif /* __linux__ */ - -#endif /* _NET80211_IEEE80211_IOCTL_H_ */ |