diff options
Diffstat (limited to 'package/network/config/ltq-vdsl-vr11-app/files/dsl_control')
| -rw-r--r-- | package/network/config/ltq-vdsl-vr11-app/files/dsl_control | 264 |
1 files changed, 264 insertions, 0 deletions
diff --git a/package/network/config/ltq-vdsl-vr11-app/files/dsl_control b/package/network/config/ltq-vdsl-vr11-app/files/dsl_control new file mode 100644 index 0000000000..d960a77261 --- /dev/null +++ b/package/network/config/ltq-vdsl-vr11-app/files/dsl_control @@ -0,0 +1,264 @@ +#!/bin/sh /etc/rc.common +# Copyright (C) 2012 OpenWrt.org + +START=97 +USE_PROCD=1 + +dslstat() { + ubus call dsl metrics +} + +extra_command "dslstat" "Get DSL status information" + +# +# ITU-T G.997.1 (06/2012) - Section 7.3.1.1.1 (xTU transmission system enabling (XTSE)) +# ITU-T G.997.1 Amendment 2 (04/2013) - Section 2.1 - (Vectoring mode enable (VECTORMODE_ENABLE)) +# +# G.992.1 Annex A +# G.992.2 Annex A +# G.992.3 Annex A / L-US1 / L_US-2 / M +# G.992.5 Annex A / M +# G.993.2 Annex A/B/C +# G.993.5 Annex A/B/C +xtse_xdsl_a="05_01_04_00_4C_01_04_07" + +# G.992.1 Annex B +# G.992.3 Annex B +# G.992.5 Annex B +# G.993.2 Annex A/B/C +# G.993.5 Annex A/B/C +xtse_xdsl_b="10_00_10_00_00_04_00_07" + +# G.992.1 Annex B +# G.992.3 Annex B +# G.992.3 Annex J +# G.992.5 Annex B +# G.992.5 Annex J +# G.993.2 Annex A/B/C +# G.993.5 Annex A/B/C +xtse_xdsl_j="10_00_10_40_00_04_01_07" + +# G.992.1 Annex B +xtse_xdsl_bdmt="10_00_00_00_00_00_00_00" + +# G.992.3 Annex B +xtse_xdsl_b2="00_00_10_00_00_00_00_00" + +# G.992.5 Annex B +xtse_xdsl_b2p="00_00_00_00_00_04_00_00" + +# ANSI T1.413 +xtse_xdsl_at1="01_00_00_00_00_00_00_00" + +# G.992.2 Annex A +xtse_xdsl_alite="00_01_00_00_00_00_00_00" + +# G.992.1 Annex A +xtse_xdsl_admt="04_00_00_00_00_00_00_00" + +# G.992.3 Annex A +xtse_xdsl_a2="00_00_04_00_00_00_00_00" + +# G.992.5 Annex A +xtse_xdsl_a2p="00_00_00_00_00_01_00_00" + +# G.992.3 Annex L +xtse_xdsl_l="00_00_00_00_0C_00_00_00" + +# G.992.3 Annex M +# G.992.5 Annex M +xtse_xdsl_m="00_00_00_00_40_00_04_00" + +# G.992.3 Annex M +xtse_xdsl_m2="00_00_00_00_40_00_00_00" + +# G.992.5 Annex M +xtse_xdsl_m2p="00_00_00_00_00_00_04_00" + +# +# ITU-T G.994.1 (06/2012) - Table 2 (Mandatory carrier sets) +# + +# A43 +tone_adsl_a="0x142" # A43C + J43 + A43 +tone_vdsl_a="0x142" # A43C + J43 + A43 + +# A43 + V43 +tone_adsl_av="0x142" # A43C + J43 + A43 +tone_vdsl_av="0x146" # A43C + J43 + A43 + V43 + +# B43 +tone_adsl_b="0x81" # B43 + B43c +tone_vdsl_b="0x1" # B43 + +# B43 + V43 +tone_adsl_bv="0x81" # B43 + B43c +tone_vdsl_bv="0x5" # B43 + V43 + +# create DSL autoboot script. Used for SNR margin tweak and to set MAC address for vectoring error reports +autoboot_script() { + echo "[WaitForConfiguration]={ +locs nLine=0 0 $1 +dsmmcs nLine=0 $2 +} + +[WaitForLinkActivate]={ +} + +[WaitForRestart]={ +} + +[Common]={ +}" > /tmp/dsl.scr +} + +lowlevel_cfg() { + echo "# VRX Low Level Configuration File +# +# Parameters must be separated by tabs or spaces. +# Empty lines and comments will be ignored. +# + +# nFilter +# +# NA = -1 +# OFF = 0 +# ISDN = 1 +# POTS = 2 +# POTS_2 = 3 +# POTS_3 = 4 +# +# (dec) + -1 + +# nHsToneGroupMode nHsToneGroup_A nHsToneGroup_V nHsToneGroup_AV +# +# NA = -1 NA = -1 see see +# AUTO = 0 VDSL2_B43 = 0x0001 nHsToneGroup_A nHsToneGroup_A +# MANUAL = 1 VDSL2_A43 = 0x0002 +# VDSL2_V43 = 0x0004 +# VDSL1_V43P = 0x0008 +# VDSL1_V43I = 0x0010 +# ADSL1_C43 = 0x0020 +# ADSL2_J43 = 0x0040 +# ADSL2_B43C = 0x0080 +# ADSL2_A43C = 0x0100 +# +# (dec) (hex) (hex) (hex) + 1 $1 $2 0x0 + +# nBaseAddr nIrqNum +# +# (hex) (dec) + 0x1e116000 63 + +# nUtopiaPhyAdr nUtopiaBusWidth nPosPhyParity +# default(16b) = 0 NA = -1 +# 8-bit = 1 ODD = 0 +# 16-bit = 2 +# +# +# (hex) (dec) (dec) + 0xFF 0 0 + +# bNtrEnable +# +# (dec) + 0" > /tmp/lowlevel.cfg +} + +get_macaddr() { + local name + config_get name $1 name + [ "$name" = "dsl0" ] && config_get $2 $1 macaddr +} + +service_triggers() { + procd_add_reload_trigger network +} + +start_service() { + local annex + local firmware + local tone + local tone_adsl + local tone_vdsl + local xtse + local xfer_mode + local line_mode + local tc_layer + local mode + local lowlevel + local snr + local macaddr + + config_load network + config_get tone dsl tone + config_get annex dsl annex + config_get firmware dsl firmware + config_get xfer_mode dsl xfer_mode + config_get line_mode dsl line_mode + config_get snr dsl ds_snr_offset + config_foreach get_macaddr device macaddr + + eval "xtse=\"\${xtse_xdsl_$annex}\"" + + case "${xfer_mode}" in + atm) + tc_layer="-T1:0x1:0x1_1:0x1:0x1" + ;; + ptm) + tc_layer="-T2:0x1:0x1_2:0x1:0x1" + ;; + esac + + case "${line_mode}" in + adsl) + mode="-M1" + + # mask out VDSL bits when ADSL is requested + xtse="${xtse%_*}_00" + ;; + vdsl) + mode="-M2" + + # mask out ADSL bits when VDSL is requested + xtse="00_00_00_00_00_00_00_${xtse##*_}" + ;; + esac + + [ -z "${firmware}" ] && firmware=/lib/firmware/vdsl.bin + [ -f "${firmware}" ] || { + echo failed to find $firmware + return 1 + } + + eval "tone_adsl=\"\${tone_adsl_$tone}\"" + eval "tone_vdsl=\"\${tone_vdsl_$tone}\"" + [ -n "${tone_adsl}" ] && [ -n "${tone_vdsl}" ] && { + lowlevel_cfg "${tone_adsl}" "${tone_vdsl}" + lowlevel="-l /tmp/lowlevel.cfg" + } + + [ -z "${snr}" ] && snr=0 + [ -z "${macaddr}" ] && macaddr="00:00:00:00:00:00" + autoboot_script "$snr" "$macaddr" + autoboot="-a /tmp/dsl.scr -A /tmp/dsl.scr" + + procd_open_instance + procd_set_param command /sbin/vdsl_cpe_control \ + -i$xtse \ + -n /sbin/dsl_notify.sh \ + -f ${firmware} \ + $lowlevel \ + ${mode} \ + ${tc_layer} \ + $autoboot + procd_close_instance +} + +stop_service() { + DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \ + DSL_INTERFACE_STATUS="DOWN" \ + /sbin/dsl_notify.sh +} |