diff options
Diffstat (limited to 'package/madwifi/patches')
33 files changed, 401 insertions, 162 deletions
diff --git a/package/madwifi/patches/200-no_debug.patch b/package/madwifi/patches/200-no_debug.patch index ce059e05cc..542c6c808c 100644 --- a/package/madwifi/patches/200-no_debug.patch +++ b/package/madwifi/patches/200-no_debug.patch @@ -150,7 +150,7 @@ ATH_DEBUG_RATE = 0x00000010, /* rate control */ --- a/tools/do_multi.c +++ b/tools/do_multi.c -@@ -9,16 +9,20 @@ +@@ -10,16 +10,20 @@ progname = basename(argv[0]); diff --git a/package/madwifi/patches/300-napi_polling.patch b/package/madwifi/patches/300-napi_polling.patch index fae35b54be..a3a7c834a4 100644 --- a/package/madwifi/patches/300-napi_polling.patch +++ b/package/madwifi/patches/300-napi_polling.patch @@ -52,7 +52,7 @@ status &= sc->sc_imask; /* discard unasked for bits */ /* As soon as we know we have a real interrupt we intend to service, * we will check to see if we need an initial hardware TSF reading. -@@ -2277,7 +2290,23 @@ +@@ -2277,7 +2290,21 @@ } if (status & (HAL_INT_RX | HAL_INT_RXPHY)) { ath_uapsd_processtriggers(sc, hw_tsf); @@ -64,10 +64,8 @@ + if (netif_rx_schedule_prep(dev)) +#endif + { -+#ifndef ATH_PRECISE_TSF + sc->sc_imask &= ~HAL_INT_RX; + ath_hal_intrset(ah, sc->sc_imask); -+#endif +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) + __netif_rx_schedule(dev, &sc->sc_napi); +#else @@ -77,7 +75,7 @@ } if (status & HAL_INT_TX) { #ifdef ATH_SUPERG_DYNTURBO -@@ -2303,6 +2332,11 @@ +@@ -2303,6 +2330,11 @@ } } #endif @@ -89,7 +87,7 @@ ATH_SCHEDULE_TQUEUE(&sc->sc_txtq, &needmark); } if (status & HAL_INT_BMISS) { -@@ -2515,6 +2549,7 @@ +@@ -2515,6 +2547,7 @@ if (sc->sc_tx99 != NULL) sc->sc_tx99->start(sc->sc_tx99); #endif @@ -97,7 +95,7 @@ done: ATH_UNLOCK(sc); -@@ -2555,6 +2590,9 @@ +@@ -2555,6 +2588,9 @@ if (sc->sc_tx99 != NULL) sc->sc_tx99->stop(sc->sc_tx99); #endif @@ -107,7 +105,7 @@ netif_stop_queue(dev); /* XXX re-enabled by ath_newstate */ dev->flags &= ~IFF_RUNNING; /* NB: avoid recursion */ ieee80211_stop_running(ic); /* stop all VAPs */ -@@ -4013,12 +4051,47 @@ +@@ -4013,12 +4049,47 @@ return ath_keyset(sc, k, mac, vap->iv_bss); } @@ -155,7 +153,7 @@ static void ath_key_update_begin(struct ieee80211vap *vap) { -@@ -4032,14 +4105,9 @@ +@@ -4032,14 +4103,9 @@ * When called from the rx tasklet we cannot use * tasklet_disable because it will block waiting * for us to complete execution. @@ -172,7 +170,7 @@ } static void -@@ -4051,9 +4119,9 @@ +@@ -4051,9 +4117,9 @@ #endif DPRINTF(sc, ATH_DEBUG_KEYCACHE, "End\n"); @@ -185,7 +183,7 @@ } /* -@@ -6360,15 +6428,25 @@ +@@ -6360,15 +6426,25 @@ sc->sc_rxotherant = 0; } @@ -215,7 +213,7 @@ struct ieee80211com *ic = &sc->sc_ic; struct ath_hal *ah = sc ? sc->sc_ah : NULL; struct ath_desc *ds; -@@ -6378,8 +6456,10 @@ +@@ -6378,8 +6454,10 @@ unsigned int len; int type; u_int phyerr; @@ -226,7 +224,7 @@ do { bf = STAILQ_FIRST(&sc->sc_rxbuf); if (bf == NULL) { /* XXX ??? can this happen */ -@@ -6403,6 +6483,15 @@ +@@ -6403,6 +6481,15 @@ /* NB: never process the self-linked entry at the end */ break; } @@ -242,7 +240,7 @@ skb = bf->bf_skb; if (skb == NULL) { EPRINTF(sc, "Dropping; buffer contains NULL skbuff.\n"); -@@ -6450,6 +6539,7 @@ +@@ -6450,6 +6537,7 @@ sc->sc_stats.ast_rx_phyerr++; phyerr = rs->rs_phyerr & 0x1f; sc->sc_stats.ast_rx_phy[phyerr]++; @@ -250,7 +248,7 @@ } if (rs->rs_status & HAL_RXERR_DECRYPT) { /* -@@ -6645,9 +6735,43 @@ +@@ -6645,9 +6733,39 @@ STAILQ_INSERT_TAIL(&sc->sc_rxbuf, bf, bf_list); ATH_RXBUF_UNLOCK_IRQ(sc); } while (ath_rxbuf_init(sc, bf) == 0); @@ -259,7 +257,6 @@ + /* Check if more data is received while we were + * processing the descriptor chain. + */ -+#ifndef ATH_PRECISE_TSF + local_irq_save(flags); + if (sc->sc_isr & HAL_INT_RX) { + u_int64_t hw_tsf = ath_hal_gettsf64(ah); @@ -268,12 +265,7 @@ + ath_uapsd_processtriggers(sc, hw_tsf); + goto process_rx_again; + } -+#endif -+#ifndef ATH_PRECISE_TSF -+ sc->sc_imask |= HAL_INT_RX; -+ ath_hal_intrset(ah, sc->sc_imask); + local_irq_restore(flags); -+#endif + } + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) @@ -283,6 +275,8 @@ + *budget -= processed; + dev->quota -= processed; +#endif ++ sc->sc_imask |= HAL_INT_RX; ++ ath_hal_intrset(ah, sc->sc_imask); /* rx signal state monitoring */ ath_hal_rxmonitor(ah, &sc->sc_halstats, &sc->sc_curchan); @@ -294,7 +288,7 @@ #undef PA2DESC } -@@ -8298,12 +8422,24 @@ +@@ -8298,12 +8416,24 @@ { struct net_device *dev = (struct net_device *)data; struct ath_softc *sc = dev->priv; @@ -319,7 +313,7 @@ netif_wake_queue(dev); if (sc->sc_softled) -@@ -8319,7 +8455,9 @@ +@@ -8319,7 +8449,9 @@ { struct net_device *dev = (struct net_device *)data; struct ath_softc *sc = dev->priv; @@ -329,7 +323,7 @@ /* * Process each active queue. */ -@@ -8340,6 +8478,16 @@ +@@ -8340,6 +8472,16 @@ if (sc->sc_uapsdq && txqactive(sc->sc_ah, sc->sc_uapsdq->axq_qnum)) ath_tx_processq(sc, sc->sc_uapsdq); @@ -346,7 +340,7 @@ netif_wake_queue(dev); if (sc->sc_softled) -@@ -8355,13 +8503,25 @@ +@@ -8355,13 +8497,25 @@ struct net_device *dev = (struct net_device *)data; struct ath_softc *sc = dev->priv; unsigned int i; @@ -372,7 +366,7 @@ netif_wake_queue(dev); if (sc->sc_softled) -@@ -10296,9 +10456,9 @@ +@@ -10296,9 +10450,9 @@ dev->mtu = mtu; if ((dev->flags & IFF_RUNNING) && !sc->sc_invalid) { /* NB: the rx buffers may need to be reallocated */ diff --git a/package/madwifi/patches/305-pureg_fix.patch b/package/madwifi/patches/305-pureg_fix.patch index 67e4b670fa..8950547d83 100644 --- a/package/madwifi/patches/305-pureg_fix.patch +++ b/package/madwifi/patches/305-pureg_fix.patch @@ -1,6 +1,6 @@ --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -4160,7 +4160,9 @@ +@@ -4158,7 +4158,9 @@ rfilt |= HAL_RX_FILTER_PROM; if (ic->ic_opmode == IEEE80211_M_STA || sc->sc_opmode == HAL_M_IBSS || /* NB: AHDEMO too */ diff --git a/package/madwifi/patches/309-micfail_detect.patch b/package/madwifi/patches/309-micfail_detect.patch index e184a4e9fd..80c1e731e7 100644 --- a/package/madwifi/patches/309-micfail_detect.patch +++ b/package/madwifi/patches/309-micfail_detect.patch @@ -1,6 +1,6 @@ --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -6459,6 +6459,7 @@ +@@ -6457,6 +6457,7 @@ int type; u_int phyerr; u_int processed = 0, early_stop = 0; @@ -8,7 +8,7 @@ DPRINTF(sc, ATH_DEBUG_RX_PROC, "invoked\n"); process_rx_again: -@@ -6560,24 +6561,8 @@ +@@ -6558,24 +6559,8 @@ } if (rs->rs_status & HAL_RXERR_MIC) { sc->sc_stats.ast_rx_badmic++; @@ -35,7 +35,7 @@ } /* * Reject error frames if we have no vaps that -@@ -6616,8 +6601,9 @@ +@@ -6614,8 +6599,9 @@ /* * Finished monitor mode handling, now reject * error frames before passing to other vaps @@ -46,7 +46,7 @@ ieee80211_dev_kfree_skb(&skb); goto rx_next; } -@@ -6625,6 +6611,26 @@ +@@ -6623,6 +6609,26 @@ /* remove the CRC */ skb_trim(skb, skb->len - IEEE80211_CRC_LEN); @@ -73,7 +73,7 @@ /* * From this point on we assume the frame is at least * as large as ieee80211_frame_min; verify that. -@@ -6637,6 +6643,7 @@ +@@ -6635,6 +6641,7 @@ goto rx_next; } diff --git a/package/madwifi/patches/310-noise_get.patch b/package/madwifi/patches/310-noise_get.patch index 81b3cad869..63e8a4fecd 100644 --- a/package/madwifi/patches/310-noise_get.patch +++ b/package/madwifi/patches/310-noise_get.patch @@ -9,7 +9,7 @@ ATH_RXBUF_LOCK_IRQ(sc); if (sc->sc_rxbufcur == NULL) sc->sc_rxbufcur = STAILQ_FIRST(&sc->sc_rxbuf); -@@ -8981,6 +8979,7 @@ +@@ -8975,6 +8973,7 @@ sc->sc_curchan.channel); sc->sc_stats.ast_per_calfail++; } @@ -17,7 +17,7 @@ ath_hal_process_noisefloor(ah); if (isIQdone == AH_TRUE) { -@@ -9049,6 +9048,7 @@ +@@ -9043,6 +9042,7 @@ struct ath_softc *sc = dev->priv; (void) ath_chan_set(sc, ic->ic_curchan); @@ -25,7 +25,7 @@ /* * If we are returning to our bss channel then mark state * so the next recv'd beacon's TSF will be used to sync the -@@ -9317,6 +9317,7 @@ +@@ -9311,6 +9311,7 @@ } ath_hal_process_noisefloor(ah); diff --git a/package/madwifi/patches/317-bmask.patch b/package/madwifi/patches/317-bmask.patch index 55d996a0b2..4402761cd8 100644 --- a/package/madwifi/patches/317-bmask.patch +++ b/package/madwifi/patches/317-bmask.patch @@ -1,6 +1,6 @@ --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -8695,6 +8695,10 @@ +@@ -8689,6 +8689,10 @@ sc->sc_rxbufcur = NULL; diff --git a/package/madwifi/patches/325-channel_spam.patch b/package/madwifi/patches/325-channel_spam.patch index 27541e1f47..ee06fe95c2 100644 --- a/package/madwifi/patches/325-channel_spam.patch +++ b/package/madwifi/patches/325-channel_spam.patch @@ -1,6 +1,6 @@ --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -9798,7 +9798,9 @@ +@@ -9792,7 +9792,9 @@ /* * Convert HAL channels to ieee80211 ones. */ @@ -10,7 +10,7 @@ for (i = 0; i < nchan; i++) { HAL_CHANNEL *c = &chans[i]; struct ieee80211_channel *ichan = &ic->ic_channels[i]; -@@ -9825,6 +9827,7 @@ +@@ -9819,6 +9821,7 @@ ic->ic_chan_non_occupy[i].tv_sec = 0; ic->ic_chan_non_occupy[i].tv_usec = 0; @@ -18,7 +18,7 @@ IPRINTF(sc, "Channel %3d (%4d MHz) Max Tx Power %d dBm%s " "[%d hw %d reg] Flags%s%s%s%s%s%s%s%s%s%s%s%s%" "s%s%s%s%s%s%s%s%s%s%s%s\n", -@@ -9913,6 +9916,7 @@ +@@ -9907,6 +9910,7 @@ (c->privFlags & 0x0080 ? " PF & (1 << 7)" : "") ); diff --git a/package/madwifi/patches/327-queue.patch b/package/madwifi/patches/327-queue.patch index a65c1ca233..71e5911e30 100644 --- a/package/madwifi/patches/327-queue.patch +++ b/package/madwifi/patches/327-queue.patch @@ -1,6 +1,6 @@ --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -8444,8 +8444,6 @@ +@@ -8438,8 +8438,6 @@ ath_hal_intrset(sc->sc_ah, sc->sc_imask); local_irq_restore(flags); @@ -9,7 +9,7 @@ if (sc->sc_softled) ath_led_event(sc, ATH_LED_TX); } -@@ -8492,8 +8490,6 @@ +@@ -8486,8 +8484,6 @@ ath_hal_intrset(sc->sc_ah, sc->sc_imask); local_irq_restore(flags); @@ -18,7 +18,7 @@ if (sc->sc_softled) ath_led_event(sc, ATH_LED_TX); } -@@ -8526,8 +8522,6 @@ +@@ -8520,8 +8516,6 @@ ath_hal_intrset(sc->sc_ah, sc->sc_imask); local_irq_restore(flags); diff --git a/package/madwifi/patches/330-beaconcal.patch b/package/madwifi/patches/330-beaconcal.patch index 49c76dafce..3504bc4e95 100644 --- a/package/madwifi/patches/330-beaconcal.patch +++ b/package/madwifi/patches/330-beaconcal.patch @@ -24,7 +24,7 @@ module_param(countrycode, int, 0600); module_param(maxvaps, int, 0600); module_param(outdoor, int, 0600); -@@ -2602,7 +2605,8 @@ +@@ -2600,7 +2603,8 @@ } if (!sc->sc_invalid) { del_timer_sync(&sc->sc_dfs_cac_timer); @@ -34,7 +34,7 @@ } ath_draintxq(sc); if (!sc->sc_invalid) { -@@ -2619,6 +2623,20 @@ +@@ -2617,6 +2621,20 @@ return 0; } @@ -55,7 +55,7 @@ /* * Stop the device, grabbing the top-level lock to protect * against concurrent entry through ath_init (which can happen -@@ -2744,6 +2762,12 @@ +@@ -2742,6 +2760,12 @@ HAL_STATUS status; /* @@ -68,7 +68,7 @@ * Convert to a HAL channel description with the flags * constrained to reflect the current operating mode. */ -@@ -5156,6 +5180,8 @@ +@@ -5154,6 +5178,8 @@ "Invoking ath_hal_txstart with sc_bhalq: %d\n", sc->sc_bhalq); ath_hal_txstart(ah, sc->sc_bhalq); @@ -77,7 +77,7 @@ sc->sc_stats.ast_be_xmit++; /* XXX per-VAP? */ } -@@ -5405,6 +5431,7 @@ +@@ -5403,6 +5429,7 @@ ath_hal_beacontimers(ah, &bs); sc->sc_imask |= HAL_INT_BMISS; ath_hal_intrset(ah, sc->sc_imask); @@ -85,7 +85,7 @@ } else { ath_hal_intrset(ah, 0); if (reset_tsf) -@@ -5416,8 +5443,11 @@ +@@ -5414,8 +5441,11 @@ */ intval |= HAL_BEACON_ENA; sc->sc_imask |= HAL_INT_SWBA; @@ -98,7 +98,7 @@ #ifdef ATH_SUPERG_DYNTURBO ath_beacon_dturbo_config(vap, intval & ~(HAL_BEACON_RESET_TSF | HAL_BEACON_ENA)); -@@ -8885,6 +8915,9 @@ +@@ -8879,6 +8909,9 @@ /* Enter DFS wait period */ mod_timer(&sc->sc_dfs_cac_timer, jiffies + (sc->sc_dfs_cac_period * HZ)); @@ -108,7 +108,7 @@ } /* * re configure beacons when it is a turbo mode switch. -@@ -8994,8 +9027,11 @@ +@@ -8988,8 +9021,11 @@ sc->sc_curchan.channel, sc->sc_curchan.channelFlags, isIQdone ? "done" : "not done"); @@ -122,7 +122,7 @@ } static void -@@ -9102,7 +9138,8 @@ +@@ -9096,7 +9132,8 @@ ieee80211_state_name[vap->iv_state], ieee80211_state_name[nstate]); @@ -132,7 +132,7 @@ ath_hal_setledstate(ah, leds[nstate]); /* set LED */ netif_stop_queue(dev); /* before we do anything else */ -@@ -9327,7 +9364,8 @@ +@@ -9321,7 +9358,8 @@ "VAP -> DFSWAIT_PENDING \n"); /* start calibration timer with a really small value * 1/10 sec */ @@ -142,7 +142,7 @@ /* wake the receiver */ netif_wake_queue(dev); /* don't do the other usual stuff... */ -@@ -9370,7 +9408,7 @@ +@@ -9364,7 +9402,7 @@ error = avp->av_newstate(vap, nstate, arg); /* Finally, start any timers. */ diff --git a/package/madwifi/patches/331-memory_alloc.patch b/package/madwifi/patches/331-memory_alloc.patch index c18f6b4fd2..49a42e9ba3 100644 --- a/package/madwifi/patches/331-memory_alloc.patch +++ b/package/madwifi/patches/331-memory_alloc.patch @@ -1,6 +1,6 @@ --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -3322,17 +3322,18 @@ +@@ -3320,17 +3320,18 @@ * without affecting any other bridge ports. */ if (skb_cloned(skb)) { /* Remember the original SKB so we can free up our references */ @@ -25,7 +25,7 @@ eh = (struct ether_header *)skb->data; #ifdef ATH_SUPERG_FF -@@ -3603,6 +3604,8 @@ +@@ -3601,6 +3602,8 @@ sc->sc_stats.ast_tx_mgmt++; return 0; bad: diff --git a/package/madwifi/patches/332-reset_beacons.patch b/package/madwifi/patches/332-reset_beacons.patch index ea3b598354..81b10b59a9 100644 --- a/package/madwifi/patches/332-reset_beacons.patch +++ b/package/madwifi/patches/332-reset_beacons.patch @@ -1,6 +1,6 @@ --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -8926,7 +8926,7 @@ +@@ -8920,7 +8920,7 @@ * re configure beacons when it is a turbo mode switch. * HW seems to turn off beacons during turbo mode switch. */ diff --git a/package/madwifi/patches/342-performance.patch b/package/madwifi/patches/342-performance.patch index c9316c6533..1fa1b856b6 100644 --- a/package/madwifi/patches/342-performance.patch +++ b/package/madwifi/patches/342-performance.patch @@ -1,6 +1,6 @@ --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -3241,7 +3241,6 @@ +@@ -3239,7 +3239,6 @@ struct ath_softc *sc = dev->priv; struct ieee80211_node *ni = NULL; struct ath_buf *bf = NULL; @@ -8,7 +8,7 @@ ath_bufhead bf_head; struct ath_buf *tbf, *tempbf; struct sk_buff *tskb; -@@ -3253,6 +3252,7 @@ +@@ -3251,6 +3250,7 @@ */ int requeue = 0; #ifdef ATH_SUPERG_FF @@ -16,7 +16,7 @@ unsigned int pktlen; struct ieee80211com *ic = &sc->sc_ic; struct ath_node *an; -@@ -3318,27 +3318,9 @@ +@@ -3316,27 +3316,9 @@ requeue = 1; goto hardstart_fail; } diff --git a/package/madwifi/patches/343-txqueue_races.patch b/package/madwifi/patches/343-txqueue_races.patch index 6cd0b13c4a..a49f5376c2 100644 --- a/package/madwifi/patches/343-txqueue_races.patch +++ b/package/madwifi/patches/343-txqueue_races.patch @@ -2,7 +2,7 @@ Merged from madwifi trunk r3551, r3552 --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -8257,6 +8257,17 @@ +@@ -8251,6 +8251,17 @@ goto bf_fail; } diff --git a/package/madwifi/patches/345-minstrel_sampling.patch b/package/madwifi/patches/345-minstrel_sampling.patch index 8180c6de45..aa242d5974 100644 --- a/package/madwifi/patches/345-minstrel_sampling.patch +++ b/package/madwifi/patches/345-minstrel_sampling.patch @@ -1,6 +1,6 @@ --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -8107,6 +8107,7 @@ +@@ -8101,6 +8101,7 @@ ath_hal_setupxtxdesc(sc->sc_ah, ds, mrr.rate1, mrr.retries1, mrr.rate2, mrr.retries2, mrr.rate3, mrr.retries3); diff --git a/package/madwifi/patches/347-tuning.patch b/package/madwifi/patches/347-tuning.patch index 54bc28952b..efa3f6e14b 100644 --- a/package/madwifi/patches/347-tuning.patch +++ b/package/madwifi/patches/347-tuning.patch @@ -1,6 +1,6 @@ --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -10280,11 +10280,11 @@ +@@ -10274,11 +10274,11 @@ sc->sc_currates = rt; sc->sc_curmode = mode; /* diff --git a/package/madwifi/patches/348-ackcts.patch b/package/madwifi/patches/348-ackcts.patch index ebd665a2a3..5dd23fefb5 100644 --- a/package/madwifi/patches/348-ackcts.patch +++ b/package/madwifi/patches/348-ackcts.patch @@ -1,6 +1,6 @@ --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -2725,6 +2725,9 @@ +@@ -2723,6 +2723,9 @@ static int ath_set_ack_bitrate(struct ath_softc *sc, int high) { @@ -10,7 +10,7 @@ if (ar_device(sc->devid) == 5212 || ar_device(sc->devid) == 5213) { /* set ack to be sent at low bit-rate */ /* registers taken from the OpenBSD 5212 HAL */ -@@ -10795,8 +10798,13 @@ +@@ -10789,8 +10792,13 @@ break; #endif case ATH_ACKRATE: diff --git a/package/madwifi/patches/349-reset.patch b/package/madwifi/patches/349-reset.patch index 6333358d59..8b74e021d0 100644 --- a/package/madwifi/patches/349-reset.patch +++ b/package/madwifi/patches/349-reset.patch @@ -1,6 +1,6 @@ --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -8868,8 +8868,7 @@ +@@ -8862,8 +8862,7 @@ * needed to do the reset with chanchange = AH_FALSE in order * to receive traffic when peforming high velocity channel * changes. */ diff --git a/package/madwifi/patches/352-ani_fix.patch b/package/madwifi/patches/352-ani_fix.patch index 5f631d7d2e..9845f7807a 100644 --- a/package/madwifi/patches/352-ani_fix.patch +++ b/package/madwifi/patches/352-ani_fix.patch @@ -23,7 +23,7 @@ return 0; bad3: ieee80211_ifdetach(ic); -@@ -2351,16 +2354,6 @@ +@@ -2349,16 +2352,6 @@ } if (status & HAL_INT_MIB) { sc->sc_stats.ast_mib++; @@ -40,7 +40,7 @@ /* Let the HAL handle the event. */ ath_hal_mibevent(ah, &sc->sc_halstats); } -@@ -2430,6 +2423,43 @@ +@@ -2428,6 +2421,43 @@ return flags; } @@ -84,7 +84,7 @@ /* * Context: process context */ -@@ -2495,8 +2525,7 @@ +@@ -2493,8 +2523,7 @@ if (sc->sc_softled) ath_hal_gpioCfgOutput(ah, sc->sc_ledpin); @@ -94,7 +94,7 @@ /* * This is needed only to setup initial state -@@ -2532,7 +2561,7 @@ +@@ -2530,7 +2559,7 @@ * Enable MIB interrupts when there are hardware phy counters. * Note we only do this (at the moment) for station mode. */ @@ -103,7 +103,7 @@ sc->sc_imask |= HAL_INT_MIB; ath_hal_intrset(ah, sc->sc_imask); -@@ -2789,9 +2818,7 @@ +@@ -2787,9 +2816,7 @@ EPRINTF(sc, "Unable to reset hardware: '%s' (HAL status %u)\n", ath_get_hal_status_desc(status), status); @@ -114,7 +114,7 @@ ath_update_txpow(sc); /* update tx power state */ ath_radar_update(sc); ath_setdefantenna(sc, sc->sc_defant); -@@ -4176,6 +4203,8 @@ +@@ -4174,6 +4201,8 @@ if (sc->sc_nmonvaps > 0) rfilt |= (HAL_RX_FILTER_CONTROL | HAL_RX_FILTER_BEACON | HAL_RX_FILTER_PROBEREQ | HAL_RX_FILTER_PROM); @@ -123,7 +123,7 @@ if (sc->sc_curchan.privFlags & CHANNEL_DFS) rfilt |= (HAL_RX_FILTER_PHYERR | HAL_RX_FILTER_PHYRADAR); return rfilt; -@@ -6526,9 +6555,6 @@ +@@ -6524,9 +6553,6 @@ rs->rs_rssi = 0; len = rs->rs_datalen; @@ -133,7 +133,7 @@ if (rs->rs_more) { /* -@@ -8880,9 +8906,7 @@ +@@ -8874,9 +8900,7 @@ if (sc->sc_softled) ath_hal_gpioCfgOutput(ah, sc->sc_ledpin); @@ -144,7 +144,7 @@ sc->sc_curchan = hchan; ath_update_txpow(sc); /* update tx power state */ ath_radar_update(sc); -@@ -10659,9 +10683,54 @@ +@@ -10653,9 +10677,54 @@ ATH_RP_IGNORED = 24, ATH_RADAR_IGNORED = 25, ATH_MAXVAPS = 26, @@ -199,7 +199,7 @@ ATH_SYSCTL_DECL(ath_sysctl_halparam, ctl, write, filp, buffer, lenp, ppos) { struct ath_softc *sc = ctl->extra1; -@@ -10847,6 +10916,11 @@ +@@ -10841,6 +10910,11 @@ case ATH_RADAR_IGNORED: sc->sc_radar_ignored = val; break; @@ -211,7 +211,7 @@ default: ret = -EINVAL; break; -@@ -10913,6 +10987,11 @@ +@@ -10907,6 +10981,11 @@ case ATH_RADAR_IGNORED: val = sc->sc_radar_ignored; break; @@ -223,7 +223,7 @@ default: ret = -EINVAL; break; -@@ -11090,6 +11169,24 @@ +@@ -11084,6 +11163,24 @@ .proc_handler = ath_sysctl_halparam, .extra2 = (void *)ATH_RADAR_IGNORED, }, diff --git a/package/madwifi/patches/355-eap_auth_disassoc.patch b/package/madwifi/patches/355-eap_auth_disassoc.patch index 7774d6bdd5..e121dae214 100644 --- a/package/madwifi/patches/355-eap_auth_disassoc.patch +++ b/package/madwifi/patches/355-eap_auth_disassoc.patch @@ -5,7 +5,7 @@ Signed-off-by: Felix Fietkau <nbd@openwrt.org> --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -8328,6 +8328,14 @@ +@@ -8322,6 +8322,14 @@ #endif if (ts->ts_status & HAL_TXERR_XRETRY) { sc->sc_stats.ast_tx_xretries++; diff --git a/package/madwifi/patches/363-fix_turbo.patch b/package/madwifi/patches/363-fix_turbo.patch index c0e0f8fc88..b3c7324652 100644 --- a/package/madwifi/patches/363-fix_turbo.patch +++ b/package/madwifi/patches/363-fix_turbo.patch @@ -1,6 +1,6 @@ --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -4917,7 +4917,7 @@ +@@ -4915,7 +4915,7 @@ * capability info and arrange for a mode change * if needed. */ diff --git a/package/madwifi/patches/366-bstuck_thresh.patch b/package/madwifi/patches/366-bstuck_thresh.patch index 9a940985d7..ecf5dc98f3 100644 --- a/package/madwifi/patches/366-bstuck_thresh.patch +++ b/package/madwifi/patches/366-bstuck_thresh.patch @@ -32,7 +32,7 @@ MODULE_PARM_DESC(autocreate, "Create ath device in " "[sta|ap|wds|adhoc|ahdemo|monitor] mode. defaults to sta, use " "'none' to disable"); -@@ -5064,7 +5068,7 @@ +@@ -5062,7 +5066,7 @@ DPRINTF(sc, ATH_DEBUG_BEACON_PROC, "Missed %u consecutive beacons (n_beacon=%u)\n", sc->sc_bmisscount, n_beacon); @@ -41,7 +41,7 @@ ATH_SCHEDULE_TQUEUE(&sc->sc_bstucktq, needmark); return; } -@@ -5220,7 +5224,7 @@ +@@ -5218,7 +5222,7 @@ * check will be true, in which case return * without resetting the driver. */ diff --git a/package/madwifi/patches/370-wdsvap.patch b/package/madwifi/patches/370-wdsvap.patch index 1cf334e7b6..d5307bb4b0 100644 --- a/package/madwifi/patches/370-wdsvap.patch +++ b/package/madwifi/patches/370-wdsvap.patch @@ -67,7 +67,7 @@ /* override with driver methods */ vap = &avp->av_vap; avp->av_newstate = vap->iv_newstate; -@@ -4201,8 +4203,7 @@ +@@ -4199,8 +4201,7 @@ if (ic->ic_opmode == IEEE80211_M_STA || sc->sc_opmode == HAL_M_IBSS || /* NB: AHDEMO too */ (sc->sc_nostabeacons) || sc->sc_scanning || @@ -77,7 +77,7 @@ rfilt |= HAL_RX_FILTER_BEACON; if (sc->sc_nmonvaps > 0) rfilt |= (HAL_RX_FILTER_CONTROL | HAL_RX_FILTER_BEACON | -@@ -9026,8 +9027,6 @@ +@@ -9020,8 +9021,6 @@ * set sc->beacons if we might need to restart * them after ath_reset. */ if (!sc->sc_beacons && diff --git a/package/madwifi/patches/374-nbtt_fix.patch b/package/madwifi/patches/374-nbtt_fix.patch index 3b00f644fb..99c13ee5db 100644 --- a/package/madwifi/patches/374-nbtt_fix.patch +++ b/package/madwifi/patches/374-nbtt_fix.patch @@ -1,6 +1,6 @@ --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -5476,6 +5476,9 @@ +@@ -5474,6 +5474,9 @@ ath_beacon_dturbo_config(vap, intval & ~(HAL_BEACON_RESET_TSF | HAL_BEACON_ENA)); #endif diff --git a/package/madwifi/patches/375-atim_tsf_update.patch b/package/madwifi/patches/375-atim_tsf_update.patch index bbe380ed47..3800b90c1b 100644 --- a/package/madwifi/patches/375-atim_tsf_update.patch +++ b/package/madwifi/patches/375-atim_tsf_update.patch @@ -1,43 +1,79 @@ --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -2785,6 +2785,44 @@ +@@ -161,6 +161,7 @@ + static void ath_beacon_return(struct ath_softc *, struct ath_buf *); + static void ath_beacon_free(struct ath_softc *); + static void ath_beacon_config(struct ath_softc *, struct ieee80211vap *); ++static void ath_hw_beacon_stop(struct ath_softc *sc); + static int ath_desc_alloc(struct ath_softc *); + static void ath_desc_free(struct ath_softc *); + static void ath_desc_swap(struct ath_desc *); +@@ -2783,6 +2784,72 @@ return 1; } ++static void ++ath_hw_beacon_stop(struct ath_softc *sc) ++{ ++ HAL_BEACON_TIMERS btimers; ++ ++ btimers.bt_intval = 0; ++ btimers.bt_nexttbtt = 0; ++ btimers.bt_nextdba = 0xffffffff; ++ btimers.bt_nextswba = 0xffffffff; ++ btimers.bt_nextatim = 0; ++ ++ ath_hal_setbeacontimers(sc->sc_ah, &btimers); ++} ++ +/* Fix up the ATIM window after TSF resync */ +static int -+ath_hw_check_atim(struct ath_softc *sc, int window) ++ath_hw_check_atim(struct ath_softc *sc, int window, int intval) +{ +#define AR5K_TIMER0_5210 0x802c /* Next beacon time register */ +#define AR5K_TIMER0_5211 0x8028 +#define AR5K_TIMER3_5210 0x8038 /* End of ATIM window time register */ +#define AR5K_TIMER3_5211 0x8034 + struct ath_hal *ah = sc->sc_ah; ++ int dev = sc->sc_ah->ah_macType; + unsigned int nbtt, atim; -+ int dev = ar_device(sc->devid); ++ bool is_5210 = false; + ++ /* ++ * check if the ATIM window is still correct: ++ * 1.) usually ATIM should be NBTT + window ++ * 2.) nbtt already updated ++ * 3.) nbtt already updated and has wrapped around ++ * 4.) atim has wrapped around ++ */ + switch(dev) { + case 5210: + nbtt = OS_REG_READ(ah, AR5K_TIMER0_5210); + atim = OS_REG_READ(ah, AR5K_TIMER3_5210); -+ if (atim - nbtt != window) { -+ OS_REG_WRITE(ah, AR5K_TIMER3_5210, nbtt + window ); -+ return atim - nbtt; -+ } ++ is_5210 = true; + break; + case 5211: + case 5212: + nbtt = OS_REG_READ(ah, AR5K_TIMER0_5211); + atim = OS_REG_READ(ah, AR5K_TIMER3_5211); -+ if (atim - nbtt != window) { -+ OS_REG_WRITE(ah, AR5K_TIMER3_5211, nbtt + window ); -+ return atim - nbtt; -+ } + break; + /* NB: 5416+ doesn't do ATIM in hw */ ++ case 5416: + default: -+ break; ++ return 0; ++ } ++ ++ if ((atim - nbtt != window) && /* 1.) */ ++ (nbtt - atim != intval - window) && /* 2.) */ ++ ((nbtt | 0x10000) - atim != intval - window) && /* 3.) */ ++ ((atim | 0x10000) - nbtt != window)) { /* 4.) */ ++ if (is_5210) ++ OS_REG_WRITE(ah, AR5K_TIMER3_5210, nbtt + window ); ++ else ++ OS_REG_WRITE(ah, AR5K_TIMER3_5211, nbtt + window ); ++ return atim - nbtt; + } ++ + return 0; +} + @@ -45,13 +81,59 @@ /* * Reset the hardware w/o losing operational state. This is * basically a more efficient way of doing ath_stop, ath_init, -@@ -6391,6 +6429,11 @@ +@@ -5282,6 +5349,7 @@ + u_int64_t tsf, hw_tsf; + u_int32_t tsftu, hw_tsftu; + u_int32_t intval, nexttbtt = 0; ++ unsigned long flags; + int reset_tsf = 0; + + if (vap == NULL) +@@ -5289,6 +5357,9 @@ + + ni = vap->iv_bss; + ++ /* TSF calculation is timing critical - we don't want to be interrupted here */ ++ local_irq_save(flags); ++ + hw_tsf = ath_hal_gettsf64(ah); + tsf = le64_to_cpu(ni->ni_tstamp.tsf); + hw_tsftu = hw_tsf >> 10; +@@ -5478,15 +5549,27 @@ + <= ath_hal_sw_beacon_response_time) + nexttbtt += intval; + sc->sc_nexttbtt = nexttbtt; ++ ++ /* stop beacons before reconfiguring the timers to avoid race ++ * conditions. ath_hal_beaconinit will start them again */ ++ ath_hw_beacon_stop(sc); ++ + ath_hal_beaconinit(ah, nexttbtt, intval); + if (intval & HAL_BEACON_RESET_TSF) { + sc->sc_last_tsf = 0; + } + sc->sc_bmisscount = 0; + ath_hal_intrset(ah, sc->sc_imask); ++ ++ if (ath_hw_check_atim(sc, 1, intval & HAL_BEACON_PERIOD)) { ++ DPRINTF(sc, ATH_DEBUG_BEACON, ++ "fixed atim window after beacon init\n"); ++ } + } + + ath_beacon_config_debug: ++ local_irq_restore(flags); ++ + /* We print all debug messages here, in order to preserve the + * time critical aspect of this function */ + DPRINTF(sc, ATH_DEBUG_BEACON, +@@ -6389,6 +6472,11 @@ DPRINTF(sc, ATH_DEBUG_BEACON, "Updated beacon timers\n"); } + if ((sc->sc_opmode == IEEE80211_M_IBSS) && + IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid) && -+ ath_hw_check_atim(sc, 1)) { ++ ath_hw_check_atim(sc, 1, vap->iv_bss->ni_intval)) { + DPRINTF(sc, ATH_DEBUG_ANY, "Fixed ATIM window after beacon recv\n"); + } /* NB: Fall Through */ diff --git a/package/madwifi/patches/376-beacon_update.patch b/package/madwifi/patches/376-beacon_update.patch deleted file mode 100644 index 2b4f34b582..0000000000 --- a/package/madwifi/patches/376-beacon_update.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/ath/if_ath.c -+++ b/ath/if_ath.c -@@ -5495,6 +5495,8 @@ - ath_hal_intrset(ah, sc->sc_imask); - ath_set_beacon_cal(sc, 0); - } else { -+ unsigned long flags; -+ - ath_hal_intrset(ah, 0); - if (reset_tsf) - intval |= HAL_BEACON_RESET_TSF; -@@ -5514,11 +5516,14 @@ - ath_beacon_dturbo_config(vap, intval & - ~(HAL_BEACON_RESET_TSF | HAL_BEACON_ENA)); - #endif -+ local_irq_save(flags); - if ((nexttbtt & HAL_BEACON_PERIOD) - (ath_hal_gettsf32(ah) >> 10) - <= ath_hal_sw_beacon_response_time) - nexttbtt += intval; - sc->sc_nexttbtt = nexttbtt; - ath_hal_beaconinit(ah, nexttbtt, intval); -+ local_irq_restore(flags); -+ - if (intval & HAL_BEACON_RESET_TSF) { - sc->sc_last_tsf = 0; - } diff --git a/package/madwifi/patches/377-disable_vlan_code.patch b/package/madwifi/patches/377-disable_vlan_code.patch index 54ab9277b3..720b8dc53a 100644 --- a/package/madwifi/patches/377-disable_vlan_code.patch +++ b/package/madwifi/patches/377-disable_vlan_code.patch @@ -1,6 +1,6 @@ --- a/net80211/ieee80211_linux.h +++ b/net80211/ieee80211_linux.h -@@ -661,22 +661,7 @@ +@@ -649,22 +649,7 @@ char *); void ieee80211_proc_cleanup(struct ieee80211vap *); diff --git a/package/madwifi/patches/378-adhoc_crash_fix.patch b/package/madwifi/patches/378-adhoc_crash_fix.patch index 1295063c0d..e28bb014bd 100644 --- a/package/madwifi/patches/378-adhoc_crash_fix.patch +++ b/package/madwifi/patches/378-adhoc_crash_fix.patch @@ -1,6 +1,6 @@ --- a/net80211/ieee80211_input.c +++ b/net80211/ieee80211_input.c -@@ -3532,6 +3532,11 @@ +@@ -3530,6 +3530,11 @@ if (ic->ic_flags & IEEE80211_F_SCAN) { ieee80211_add_scan(vap, &scan, wh, subtype, rssi, rtsf); } diff --git a/package/madwifi/patches/379-invalid_rate_fix.patch b/package/madwifi/patches/379-invalid_rate_fix.patch index 0128ca2691..305d26d600 100644 --- a/package/madwifi/patches/379-invalid_rate_fix.patch +++ b/package/madwifi/patches/379-invalid_rate_fix.patch @@ -29,7 +29,75 @@ #define ONE_SECOND (1000 * 1000) /* 1 second, or 1000 milliseconds; eternity, in other words */ #include "release.h" -@@ -689,17 +675,17 @@ +@@ -471,11 +457,11 @@ + final_rate = sc->sc_hwmap[ts->ts_rate & ~HAL_TXSTAT_ALTRATE].ieeerate; + final_ndx = rate_to_ndx(sn, final_rate); + if (final_ndx >= sn->num_rates) { +- DPRINTF(sc, "%s: final ndx too high\n", __func__); ++ DPRINTF(sc, ATH_DEBUG_RATE, "%s: final ndx too high\n", __func__); + final_ndx = 0; + } + if (final_ndx < 0) { +- DPRINTF(sc, "%s: final ndx too low\n", __func__); ++ DPRINTF(sc, ATH_DEBUG_RATE, "%s: final ndx too low\n", __func__); + final_ndx = 0; + } + +@@ -485,7 +471,7 @@ + tries = ts->ts_longretry + 1; + + if (sn->num_rates <= 0) { +- DPRINTF(sc, "%s: " MAC_FMT " %s no rates yet\n", dev_info, ++ DPRINTF(sc, ATH_DEBUG_RATE, "%s: " MAC_FMT " %s no rates yet\n", dev_info, + MAC_ADDR(an->an_node.ni_macaddr), __func__); + return; + } +@@ -551,7 +537,7 @@ + static void + ath_rate_newassoc(struct ath_softc *sc, struct ath_node *an, int isnew) + { +- DPRINTF(sc, "%s: " MAC_FMT " %s\n", dev_info, ++ DPRINTF(sc, ATH_DEBUG_RATE, "%s: " MAC_FMT " %s\n", dev_info, + MAC_ADDR(an->an_node.ni_macaddr), __func__); + if (isnew) + ath_rate_ctl_reset(sc, &an->an_node); +@@ -601,7 +587,7 @@ + p = rates + sprintf(rates, "rates :: %d ", column_index); + for (i = 0; i < num_sample_rates; i++) + p += sprintf(p, "%2u ", sn->rs_sampleTable[i][column_index]); +- DPRINTF(sc, "%s\n", rates); ++ DPRINTF(sc, ATH_DEBUG_RATE, "%s\n", rates); + }; + #endif + } +@@ -628,7 +614,7 @@ + sn->is_sampling = 0; + + if (rt == NULL) { +- DPRINTF(sc, "no rates yet! mode %u\n", sc->sc_curmode); ++ DPRINTF(sc, ATH_DEBUG_RATE, "no rates yet! mode %u\n", sc->sc_curmode); + return; + } + sn->static_rate_ndx = -1; +@@ -658,7 +644,7 @@ + sn->rates[x].rix = sc->sc_rixmap[sn->rates[x].rate]; + } + if (sn->rates[x].rix == 0xff) { +- DPRINTF(sc, "%s: %s ignore bogus rix at %d\n", ++ DPRINTF(sc, ATH_DEBUG_RATE, "%s: %s ignore bogus rix at %d\n", + dev_info, __func__, x); + continue; + } +@@ -673,7 +659,7 @@ + ni->ni_txrate = 0; + + if (sn->num_rates <= 0) { +- DPRINTF(sc, "%s: %s " MAC_FMT " no rates (fixed %d) \n", ++ DPRINTF(sc, ATH_DEBUG_RATE, "%s: %s " MAC_FMT " no rates (fixed %d) \n", + dev_info, __func__, MAC_ADDR(ni->ni_macaddr), + vap->iv_fixed_rate); + /* There are no rates yet; we're done */ +@@ -689,23 +675,23 @@ * the node. We know the rate is there because the * rate set is checked when the station associates. */ /* NB: the rate set is assumed sorted */ @@ -48,13 +116,72 @@ + if ((ni->ni_rates.rs_rates[srate] & IEEE80211_RATE_VAL) != vap->iv_fixed_rate) + EPRINTF(sc, "Invalid static rate, falling back to basic rate\n"); + else -+ DPRINTF(sc, "%s: %s " MAC_FMT " fixed rate %d%sMbps\n", ++ DPRINTF(sc, ATH_DEBUG_RATE, "%s: %s " MAC_FMT " fixed rate %d%sMbps\n", + dev_info, __func__, MAC_ADDR(ni->ni_macaddr), + sn->rates[srate].rate / 2, + (sn->rates[srate].rate % 2) ? ".5 " : " "); return; } + for (x = 0; x < ni->ni_rates.rs_nrates; x++) { + if (sn->rates[x].rix == 0xff) { +- DPRINTF(sc, "%s: %s ignore bogus rix at %d\n", ++ DPRINTF(sc, ATH_DEBUG_RATE, "%s: %s ignore bogus rix at %d\n", + dev_info, __func__, x); + continue; + } +@@ -735,9 +721,9 @@ + } + + #if 0 +- DPRINTF(sc, "%s: Retry table for this node\n", __func__); ++ DPRINTF(sc, ATH_DEBUG_RATE, "%s: Retry table for this node\n", __func__); + for (x = 0; x < ni->ni_rates.rs_nrates; x++) +- DPRINTF(sc, "%2d %2d %6d \n", x, sn->retry_count[x], sn->perfect_tx_time[x]); ++ DPRINTF(sc, ATH_DEBUG_RATE, "%2d %2d %6d \n", x, sn->retry_count[x], sn->perfect_tx_time[x]); + #endif + + /* Set the initial rate */ +@@ -781,10 +767,10 @@ + unsigned int interval = ath_timer_interval; + + if (dev == NULL) +- DPRINTF(sc, "%s: 'dev' is null in this timer \n", __func__); ++ DPRINTF(sc, ATH_DEBUG_RATE, "%s: 'dev' is null in this timer \n", __func__); + + if (sc == NULL) +- DPRINTF(sc, "%s: 'sc' is null in this timer\n", __func__); ++ DPRINTF(sc, ATH_DEBUG_RATE, "%s: 'sc' is null in this timer\n", __func__); + + ic = &sc->sc_ic; + +@@ -808,7 +794,7 @@ + + timer = &(ssc->timer); + if (timer == NULL) +- DPRINTF(sc, "%s: timer is null - leave it\n", __func__); ++ DPRINTF(sc, ATH_DEBUG_RATE, "%s: timer is null - leave it\n", __func__); + + timer->expires = jiffies + ((HZ * interval) / 1000); + add_timer(timer); +@@ -904,7 +890,7 @@ + ath_rate_attach(struct ath_softc *sc) + { + struct minstrel_softc *osc; +- DPRINTF(sc, "%s: %s\n", dev_info, __func__); ++ DPRINTF(sc, ATH_DEBUG_RATE, "%s: %s\n", dev_info, __func__); + + _MOD_INC_USE(THIS_MODULE, return NULL); + osc = kmalloc(sizeof(struct minstrel_softc), GFP_ATOMIC); +@@ -963,7 +949,7 @@ + p += sprintf(p, "out of room for node " MAC_FMT "\n\n", MAC_ADDR(ni->ni_macaddr)); + break; + } +- DPRINTF(sc, "%s: out of memeory to write tall of the nodes\n", __func__); ++ DPRINTF(sc, ATH_DEBUG_RATE, "%s: out of memeory to write tall of the nodes\n", __func__); + break; + } + an = ATH_NODE(ni); --- a/ath_rate/amrr/amrr.c +++ b/ath_rate/amrr/amrr.c @@ -64,24 +64,13 @@ @@ -83,6 +210,15 @@ static int ath_rateinterval = 1000; /* rate ctl interval (ms) */ static int ath_rate_max_success_threshold = 10; static int ath_rate_min_success_threshold = 1; +@@ -197,7 +186,7 @@ + + KASSERT(rt != NULL, ("no rate table, mode %u", sc->sc_curmode)); + +- DPRINTF(sc, "%s: set xmit rate for " MAC_FMT " to %dM\n", ++ DPRINTF(sc, ATH_DEBUG_RATE, "%s: set xmit rate for " MAC_FMT " to %dM\n", + __func__, MAC_ADDR(ni->ni_macaddr), + ni->ni_rates.rs_nrates > 0 ? + (ni->ni_rates.rs_rates[rate] & IEEE80211_RATE_VAL) / 2 : 0); @@ -297,9 +286,9 @@ * rate set is checked when the station associates. */ @@ -96,6 +232,39 @@ } ath_rate_update(sc, ni, srate); #undef RATE +@@ -377,7 +366,7 @@ + + old_rate = ni->ni_txrate; + +- DPRINTF (sc, "cnt0: %d cnt1: %d cnt2: %d cnt3: %d -- threshold: %d\n", ++ DPRINTF(sc, ATH_DEBUG_RATE, "cnt0: %d cnt1: %d cnt2: %d cnt3: %d -- threshold: %d\n", + amn->amn_tx_try0_cnt, + amn->amn_tx_try1_cnt, + amn->amn_tx_try2_cnt, +@@ -390,7 +379,7 @@ + amn->amn_recovery = 1; + amn->amn_success = 0; + ni->ni_txrate++; +- DPRINTF(sc, "increase rate to %d\n", ni->ni_txrate); ++ DPRINTF(sc, ATH_DEBUG_RATE, "increase rate to %d\n", ni->ni_txrate); + } else + amn->amn_recovery = 0; + } else if (is_failure(amn)) { +@@ -401,12 +390,12 @@ + amn->amn_success_threshold *= 2; + amn->amn_success_threshold = min(amn->amn_success_threshold, + (u_int)ath_rate_max_success_threshold); +- DPRINTF(sc, "decrease rate recovery thr: %d\n", ++ DPRINTF(sc, ATH_DEBUG_RATE, "decrease rate recovery thr: %d\n", + amn->amn_success_threshold); + } else { + /* simple failure. */ + amn->amn_success_threshold = ath_rate_min_success_threshold; +- DPRINTF(sc, "decrease rate normal thr: %d\n", ++ DPRINTF(sc, ATH_DEBUG_RATE, "decrease rate normal thr: %d\n", + amn->amn_success_threshold); + } + amn->amn_recovery = 0; --- a/ath_rate/onoe/onoe.c +++ b/ath_rate/onoe/onoe.c @@ -60,27 +60,13 @@ @@ -127,6 +296,15 @@ /* * Default parameters for the rate control algorithm. These are * all tunable with sysctls. The rate controller runs periodically +@@ -186,7 +172,7 @@ + + KASSERT(rt != NULL, ("no rate table, mode %u", sc->sc_curmode)); + +- DPRINTF(sc, "%s: set xmit rate for " MAC_FMT " to %dM\n", ++ DPRINTF(sc, ATH_DEBUG_RATE, "%s: set xmit rate for " MAC_FMT " to %dM\n", + __func__, MAC_ADDR(ni->ni_macaddr), + ni->ni_rates.rs_nrates > 0 ? + (ni->ni_rates.rs_rates[rate] & IEEE80211_RATE_VAL) / 2 : 0); @@ -283,9 +269,9 @@ */ /* NB: the rate set is assumed sorted */ @@ -140,6 +318,24 @@ } ath_rate_update(sc, ni, srate); #undef RATE +@@ -364,7 +350,7 @@ + on->on_tx_retr < (on->on_tx_ok * ath_rate_raise) / 100) + dir = 1; + +- DPRINTF(sc, MAC_FMT ": ok %d err %d retr %d upper %d dir %d\n", ++ DPRINTF(sc, ATH_DEBUG_RATE, MAC_FMT ": ok %d err %d retr %d upper %d dir %d\n", + MAC_ADDR(ni->ni_macaddr), + on->on_tx_ok, on->on_tx_err, on->on_tx_retr, + on->on_tx_upper, dir); +@@ -395,7 +381,7 @@ + } + + if (nrate != ni->ni_txrate) { +- DPRINTF(sc, "%s: %dM -> %dM (%d ok, %d err, %d retr)\n", ++ DPRINTF(sc, ATH_DEBUG_RATE, "%s: %dM -> %dM (%d ok, %d err, %d retr)\n", + __func__, + (rs->rs_rates[ni->ni_txrate] & IEEE80211_RATE_VAL) / 2, + (rs->rs_rates[nrate] & IEEE80211_RATE_VAL) / 2, --- a/ath_rate/sample/sample.c +++ b/ath_rate/sample/sample.c @@ -62,30 +62,13 @@ @@ -174,6 +370,15 @@ /* * This file is an implementation of the SampleRate algorithm * in "Bit-rate Selection in Wireless Networks" +@@ -740,7 +723,7 @@ + ndx[3] = rate_to_ndx(sn, rate[3]); + + #if 0 +- DPRINTF(sc, "%s: " MAC_FMT " size %u finaltsidx %u tries %u status %u rate/try %u/%u %u/%u %u/%u %u/%u\n", ++ DPRINTF(sc, ATH_DEBUG_RATE, "%s: " MAC_FMT " size %u finaltsidx %u tries %u status %u rate/try %u/%u %u/%u %u/%u %u/%u\n", + dev_info, MAC_ADDR(an->an_node.ni_macaddr), + bin_to_size(size_to_bin(frame_size)), + finalTSIdx, @@ -886,15 +869,16 @@ if ((ni->ni_rates.rs_rates[x] & IEEE80211_RATE_VAL) == vap->iv_fixed_rate) srate = x; diff --git a/package/madwifi/patches/380-noderef_fix.patch b/package/madwifi/patches/380-noderef_fix.patch deleted file mode 100644 index fb4192ddf9..0000000000 --- a/package/madwifi/patches/380-noderef_fix.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/net80211/ieee80211_node.c -+++ b/net80211/ieee80211_node.c -@@ -316,7 +316,7 @@ - */ - ni = ieee80211_find_node(&ic->ic_sta, vap->iv_myaddr); - if (ni == NULL) { -- ni = ieee80211_alloc_node_table(vap, vap->iv_myaddr); -+ ni = ieee80211_alloc_node(vap, vap->iv_myaddr); - IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC, - "%s: ni:%p allocated for " MAC_FMT "\n", - __func__, ni, MAC_ADDR(vap->iv_myaddr)); -@@ -421,14 +421,14 @@ - /* XXX multi-bss wrong */ - ieee80211_reset_erp(ic, ic->ic_curmode); - -- ni = ieee80211_alloc_node_table(vap, vap->iv_myaddr); -+ ni = ieee80211_alloc_node(vap, vap->iv_myaddr); - IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC, - "%s: ni:%p allocated for " MAC_FMT "\n", - __func__, ni, MAC_ADDR(vap->iv_myaddr)); - KASSERT(ni != NULL, ("unable to setup inital BSS node")); - - vap->iv_bss = PASS_NODE(ni); -- KASSERT((atomic_read(&vap->iv_bss->ni_refcnt) == 2), -+ KASSERT((atomic_read(&vap->iv_bss->ni_refcnt) == 1), - ("wrong refcount for new node.")); - - if (obss != NULL) { - diff --git a/package/madwifi/patches/380-noderef_hack.patch b/package/madwifi/patches/380-noderef_hack.patch new file mode 100644 index 0000000000..4e224903ce --- /dev/null +++ b/package/madwifi/patches/380-noderef_hack.patch @@ -0,0 +1,13 @@ +--- a/net80211/ieee80211_node.c ++++ b/net80211/ieee80211_node.c +@@ -427,8 +427,8 @@ + __func__, ni, MAC_ADDR(vap->iv_myaddr)); + KASSERT(ni != NULL, ("unable to setup inital BSS node")); + +- vap->iv_bss = PASS_NODE(ni); +- KASSERT((atomic_read(&vap->iv_bss->ni_refcnt) == 2), ++ vap->iv_bss = ieee80211_ref_node(ni); ++ KASSERT((atomic_read(&vap->iv_bss->ni_refcnt) == 3), + ("wrong refcount for new node.")); + + if (obss != NULL) { diff --git a/package/madwifi/patches/406-monitor_r3711.patch b/package/madwifi/patches/406-monitor_r3711.patch index 9f6ef59fc0..74004ad2eb 100644 --- a/package/madwifi/patches/406-monitor_r3711.patch +++ b/package/madwifi/patches/406-monitor_r3711.patch @@ -1,6 +1,6 @@ --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -6371,7 +6371,7 @@ +@@ -6409,7 +6409,7 @@ /* Never copy the SKB, as it is ours on the RX side, and this is the * last process on the TX side and we only modify our own headers. */ @@ -9,7 +9,7 @@ if (tskb == NULL) { DPRINTF(sc, ATH_DEBUG_ANY, "Dropping; ath_skb_removepad failed!\n"); -@@ -6379,6 +6379,8 @@ +@@ -6417,6 +6417,8 @@ } ieee80211_input_monitor(ic, tskb, bf, tx, tsf, sc); diff --git a/package/madwifi/patches/408-changeset_r3337.patch b/package/madwifi/patches/408-changeset_r3337.patch index 13200ab4fd..5b225650a9 100644 --- a/package/madwifi/patches/408-changeset_r3337.patch +++ b/package/madwifi/patches/408-changeset_r3337.patch @@ -10,7 +10,7 @@ Please let us know if you think your name should be mentioned here! --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -3002,7 +3002,7 @@ +@@ -3029,7 +3029,7 @@ struct ath_softc *sc = dev->priv; struct ath_hal *ah = sc->sc_ah; struct ieee80211_phy_params *ph = (struct ieee80211_phy_params *) diff --git a/package/madwifi/patches/450-new_hal.patch b/package/madwifi/patches/450-new_hal.patch index 5171ce2784..b9e2454d8e 100644 --- a/package/madwifi/patches/450-new_hal.patch +++ b/package/madwifi/patches/450-new_hal.patch @@ -93,7 +93,7 @@ * The functions in this section are not intended to be invoked by MadWifi --- a/ath/if_ath.c +++ b/ath/if_ath.c -@@ -592,6 +592,14 @@ +@@ -593,6 +593,14 @@ } sc->sc_ah = ah; @@ -108,7 +108,7 @@ /* * Check if the MAC has multi-rate retry support. * We do this by trying to setup a fake extended -@@ -7348,7 +7356,7 @@ +@@ -7382,7 +7390,7 @@ if (qtype == HAL_TX_QUEUE_UAPSD) qi.tqi_qflags = HAL_TXQ_TXDESCINT_ENABLE; else |