aboutsummaryrefslogtreecommitdiffstats
path: root/package/madwifi/patches/407-new_athinfo.patch
diff options
context:
space:
mode:
Diffstat (limited to 'package/madwifi/patches/407-new_athinfo.patch')
-rw-r--r--package/madwifi/patches/407-new_athinfo.patch2352
1 files changed, 0 insertions, 2352 deletions
diff --git a/package/madwifi/patches/407-new_athinfo.patch b/package/madwifi/patches/407-new_athinfo.patch
deleted file mode 100644
index 6c512ad9e8..0000000000
--- a/package/madwifi/patches/407-new_athinfo.patch
+++ /dev/null
@@ -1,2352 +0,0 @@
---- a/tools/ath_info.c
-+++ b/tools/ath_info.c
-@@ -16,78 +16,8 @@
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
--/* So here is how it works:
-- *
-- * First compile...
-- *
-- * gcc ath_info.c -o ath_info
-- *
-- * then find card's physical address
-- *
-- * lspci -v
-- *
-- * 02:02.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
-- * Subsystem: Fujitsu Limited. Unknown device 1234
-- * Flags: bus master, medium devsel, latency 168, IRQ 23
-- * Memory at c2000000 (32-bit, non-prefetchable) [size=64K]
-- * Capabilities: [44] Power Management version 2
-- *
-- * address here is 0xc2000000
-- *
-- * load madwifi-ng or madwifi-old if not already loaded (be sure the
-- * interface is down!)
-- *
-- * modprobe ath_pci
-- *
-- * OR
-- *
-- * call:
-- * setpci -s 02:02.0 command=0x41f cache_line_size=0x10
-- *
-- * to enable access to the PCI device.
-- *
-- * and we run the thing...
-- *
-- * ./ath_info 0xc2000000
-- *
-- * In order to change the regdomain to 0, call:
-- *
-- * ./ath_info -w 0xc2000000 regdomain 0
-- *
-- * to change any PCI ID value, say:
-- *
-- * ./ath_info -w 0xc2000000 <name> X
-- *
-- * with <name> ::= pci_dev_id | pci_vendor_id | pci_class |
-- * pci_subsys_dev_id | pci_subsys_vendor_id
-- *
-- * With newer chipsets (>= AR5004x, i.e. MAC >= AR5213), Atheros introduced
-- * write protection on the EEPROM. On a GIGABYTE GN-WI01HT you can set GPIO 4
-- * to low to be able to write the EEPROM. This depends highly on the PCB layout,
-- * so there may be different GPIO used.
-- * This program currently sets GPIO 4 to low for a MAC >= AR5213, but you can
-- * override this with the -g option:
-- *
-- * ./ath_info -g 5:0 -w 0xc2000000 regdomain X
-- *
-- * would set GPIO 5 to low (and wouldn't touch GPIO 4). -g can be given several times.
-- *
-- * The write function is currently not tested with 5210 devices.
-- *
-- * Use at your own risk, entering a false device address will have really
-- * nasty results!
-- *
-- * Writing wrong values to the PCI id fields may prevent the driver from
-- * detecting the card!
-- *
-- * Transmitting on illegal frequencies may violate state laws. Stick to the local
-- * regulations!
-- *
-- * DISCLAIMER:
-- * The authors are in no case responsible for damaged hardware or violation of
-- * local laws by operating modified hardware.
-- *
-- */
-+/* Try accepting 64-bit device address even with 32-bit userspace */
-+#define _FILE_OFFSET_BITS 64
-
- #include <stdio.h>
- #include <stdlib.h>
-@@ -130,109 +60,103 @@ fprintf(stderr, "#ERR %s: " fmt "\n", __
- */
- #define AR5K_GPIODI 0x401c
-
--/*
-- * Common silicon revision/version values
-- */
--enum ath5k_srev_type {
-- AR5K_VERSION_VER,
-- AR5K_VERSION_REV,
-- AR5K_VERSION_RAD,
--};
--
- struct ath5k_srev_name {
- const char *sr_name;
-- enum ath5k_srev_type sr_type;
-- u_int sr_val;
-+ u_int8_t sr_val;
- };
-
--#define AR5K_SREV_UNKNOWN 0xffff
--
- /* Known MAC revision numbers */
--#define AR5K_SREV_VER_AR5210 0x00
--#define AR5K_SREV_VER_AR5311 0x10
--#define AR5K_SREV_VER_AR5311A 0x20
--#define AR5K_SREV_VER_AR5311B 0x30
--#define AR5K_SREV_VER_AR5211 0x40
--#define AR5K_SREV_VER_AR5212 0x50
--#define AR5K_SREV_VER_AR5213 0x55
--#define AR5K_SREV_VER_AR5213A 0x59
--#define AR5K_SREV_VER_AR2424 0xa0
--#define AR5K_SREV_VER_AR5424 0xa3
--#define AR5K_SREV_VER_AR5413 0xa4
--#define AR5K_SREV_VER_AR5414 0xa5
--#define AR5K_SREV_VER_AR5416 0xc0
--#define AR5K_SREV_VER_AR5418 0xca
--#define AR5K_SREV_VER_AR2425 0xe0
--
--/* Known PHY revision nymbers */
--#define AR5K_SREV_RAD_5110 0x00
--#define AR5K_SREV_RAD_5111 0x10
--#define AR5K_SREV_RAD_5111A 0x15
--#define AR5K_SREV_RAD_2111 0x20
--#define AR5K_SREV_RAD_5112 0x30
--#define AR5K_SREV_RAD_5112A 0x35
--#define AR5K_SREV_RAD_2112 0x40
--#define AR5K_SREV_RAD_2112A 0x45
--#define AR5K_SREV_RAD_SC1 0x63 /* Found on 5413/5414 */
--#define AR5K_SREV_RAD_SC2 0xa2 /* Found on 2424/5424 */
--#define AR5K_SREV_RAD_5133 0xc0 /* MIMO found on 5418 */
--
--static const struct ath5k_srev_name ath5k_srev_names[] = {
-- {"5210", AR5K_VERSION_VER, AR5K_SREV_VER_AR5210},
-- {"5311", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311},
-- {"5311A", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311A},
-- {"5311B", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311B},
-- {"5211", AR5K_VERSION_VER, AR5K_SREV_VER_AR5211},
-- {"5212", AR5K_VERSION_VER, AR5K_SREV_VER_AR5212},
-- {"5213", AR5K_VERSION_VER, AR5K_SREV_VER_AR5213},
-- {"5213A", AR5K_VERSION_VER, AR5K_SREV_VER_AR5213A},
-- {"2424", AR5K_VERSION_VER, AR5K_SREV_VER_AR2424},
-- {"5424", AR5K_VERSION_VER, AR5K_SREV_VER_AR5424},
-- {"5413", AR5K_VERSION_VER, AR5K_SREV_VER_AR5413},
-- {"5414", AR5K_VERSION_VER, AR5K_SREV_VER_AR5414},
-- {"5416", AR5K_VERSION_VER, AR5K_SREV_VER_AR5416},
-- {"5418", AR5K_VERSION_VER, AR5K_SREV_VER_AR5418},
-- {"2425", AR5K_VERSION_VER, AR5K_SREV_VER_AR2425},
-- {"xxxxx", AR5K_VERSION_VER, AR5K_SREV_UNKNOWN},
-- {"5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110},
-- {"5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111},
-- {"2111", AR5K_VERSION_RAD, AR5K_SREV_RAD_2111},
-- {"5112", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112},
-- {"5112a", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112A},
-- {"2112", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112},
-- {"2112a", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112A},
-- {"SChip", AR5K_VERSION_RAD, AR5K_SREV_RAD_SC1},
-- {"SChip", AR5K_VERSION_RAD, AR5K_SREV_RAD_SC2},
-- {"5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133},
-- {"xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN},
-+#define AR5K_SREV_MAC_AR5210 0x00
-+#define AR5K_SREV_MAC_AR5311 0x10
-+#define AR5K_SREV_MAC_AR5311A 0x20
-+#define AR5K_SREV_MAC_AR5311B 0x30
-+#define AR5K_SREV_MAC_AR5211 0x40
-+#define AR5K_SREV_MAC_AR5212 0x50
-+#define AR5K_SREV_MAC_AR5213 0x55
-+#define AR5K_SREV_MAC_AR5213A 0x59
-+#define AR5K_SREV_MAC_AR5513 0x61
-+#define AR5K_SREV_MAC_AR2413 0x78
-+#define AR5K_SREV_MAC_AR2414 0x79
-+#define AR5K_SREV_MAC_AR2424 0xa0
-+#define AR5K_SREV_MAC_AR5424 0xa3
-+#define AR5K_SREV_MAC_AR5413 0xa4
-+#define AR5K_SREV_MAC_AR5414 0xa5
-+#define AR5K_SREV_MAC_AR5416 0xc0
-+#define AR5K_SREV_MAC_AR5418 0xca
-+#define AR5K_SREV_MAC_AR2425 0xe2
-+
-+/* Known PHY revision numbers */
-+#define AR5K_SREV_PHY_5110 0x00
-+#define AR5K_SREV_PHY_5111 0x10
-+#define AR5K_SREV_PHY_5111A 0x15
-+#define AR5K_SREV_PHY_2111 0x20
-+#define AR5K_SREV_PHY_5112 0x30
-+#define AR5K_SREV_PHY_5112A 0x35
-+#define AR5K_SREV_PHY_2112 0x40
-+#define AR5K_SREV_PHY_2112A 0x45
-+#define AR5K_SREV_PHY_SC0 0x56 /* Found on 2413/2414 */
-+#define AR5K_SREV_PHY_SC1 0x63 /* Found on 5413/5414 */
-+#define AR5K_SREV_PHY_SC2 0xa2 /* Found on 2424/5424 */
-+#define AR5K_SREV_PHY_5133 0xc0 /* MIMO found on 5418 */
-+
-+static const struct ath5k_srev_name ath5k_mac_names[] = {
-+ {"5210", AR5K_SREV_MAC_AR5210},
-+ {"5311", AR5K_SREV_MAC_AR5311},
-+ {"5311A", AR5K_SREV_MAC_AR5311A},
-+ {"5311B", AR5K_SREV_MAC_AR5311B},
-+ {"5211", AR5K_SREV_MAC_AR5211},
-+ {"5212", AR5K_SREV_MAC_AR5212},
-+ {"5213", AR5K_SREV_MAC_AR5213},
-+ {"5213A", AR5K_SREV_MAC_AR5213A},
-+ {"2413", AR5K_SREV_MAC_AR2413},
-+ {"2414", AR5K_SREV_MAC_AR2414},
-+ {"2424", AR5K_SREV_MAC_AR2424},
-+ {"5424", AR5K_SREV_MAC_AR5424},
-+ {"5413", AR5K_SREV_MAC_AR5413},
-+ {"5414", AR5K_SREV_MAC_AR5414},
-+ {"5416", AR5K_SREV_MAC_AR5416},
-+ {"5418", AR5K_SREV_MAC_AR5418},
-+ {"2425", AR5K_SREV_MAC_AR2425},
-+};
-+
-+static const struct ath5k_srev_name ath5k_phy_names[] = {
-+ {"5110", AR5K_SREV_PHY_5110},
-+ {"5111", AR5K_SREV_PHY_5111},
-+ {"2111", AR5K_SREV_PHY_2111},
-+ {"5112", AR5K_SREV_PHY_5112},
-+ {"5112A", AR5K_SREV_PHY_5112A},
-+ {"2112", AR5K_SREV_PHY_2112},
-+ {"2112A", AR5K_SREV_PHY_2112A},
-+ {"SChip", AR5K_SREV_PHY_SC0},
-+ {"SChip", AR5K_SREV_PHY_SC1},
-+ {"SChip", AR5K_SREV_PHY_SC2},
-+ {"5133", AR5K_SREV_PHY_5133},
- };
-
- /*
- * Silicon revision register
- */
- #define AR5K_SREV 0x4020 /* Register Address */
--#define AR5K_SREV_REV 0x0000000f /* Mask for revision */
--#define AR5K_SREV_REV_S 0
--#define AR5K_SREV_VER 0x000000ff /* Mask for version */
--#define AR5K_SREV_VER_S 4
-+#define AR5K_SREV_VER 0x000000f0 /* Mask for version */
-+#define AR5K_SREV_REV 0x000000ff /* Mask for revision */
-
- /*
- * PHY chip revision register
- */
--#define AR5K_PHY_CHIP_ID 0x9818
-+#define AR5K_PHY_CHIP_ID 0x9818
-
- /*
- * PHY register
- */
--#define AR5K_PHY_BASE 0x9800
--#define AR5K_PHY(_n) (AR5K_PHY_BASE + ((_n) << 2))
-+#define AR5K_PHY_BASE 0x9800
-+#define AR5K_PHY(_n) (AR5K_PHY_BASE + ((_n) << 2))
- #define AR5K_PHY_SHIFT_2GHZ 0x00004007
- #define AR5K_PHY_SHIFT_5GHZ 0x00000007
-
- #define AR5K_RESET_CTL 0x4000 /* Register Address */
- #define AR5K_RESET_CTL_PCU 0x00000001 /* Protocol Control Unit reset */
- #define AR5K_RESET_CTL_DMA 0x00000002 /* DMA (Rx/Tx) reset -5210 only */
--#define AR5K_RESET_CTL_BASEBAND 0x00000002 /* Baseband reset (5211/5212) */
-+#define AR5K_RESET_CTL_BASEBAND 0x00000002 /* Baseband reset (5211/5212) */
- #define AR5K_RESET_CTL_MAC 0x00000004 /* MAC reset (PCU+Baseband?) -5210 only */
- #define AR5K_RESET_CTL_PHY 0x00000008 /* PHY reset -5210 only */
- #define AR5K_RESET_CTL_PCI 0x00000010 /* PCI Core reset (interrupts etc) */
-@@ -253,7 +177,7 @@ static const struct ath5k_srev_name ath5
- #define AR5K_SLEEP_CTL_SLE_UNITS 0x00000008 /* not on 5210 */
-
- #define AR5K_PCICFG 0x4010 /* Register Address */
--#define AR5K_PCICFG_EEAE 0x00000001 /* Eeprom access enable [5210] */
-+#define AR5K_PCICFG_EEAE 0x00000001 /* EEPROM access enable [5210] */
- #define AR5K_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable [5211+] */
- #define AR5K_PCICFG_EESIZE 0x00000018 /* Mask for EEPROM size [5211+] */
- #define AR5K_PCICFG_EESIZE_S 3
-@@ -264,26 +188,118 @@ static const struct ath5k_srev_name ath5
-
- #define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status (5210) */
-
--#define AR5K_EEPROM_BASE 0x6000
-+#define AR5K_EEPROM_BASE 0x6000
-
--#define AR5K_EEPROM_MAGIC 0x003d /* Offset for EEPROM Magic number */
-+/*
-+ * Common AR5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE)
-+ */
-+#define AR5K_EEPROM_MAGIC 0x003d /* EEPROM Magic number */
- #define AR5K_EEPROM_MAGIC_VALUE 0x5aa5 /* Default - found on EEPROM */
- #define AR5K_EEPROM_MAGIC_5212 0x0000145c /* 5212 */
- #define AR5K_EEPROM_MAGIC_5211 0x0000145b /* 5211 */
- #define AR5K_EEPROM_MAGIC_5210 0x0000145a /* 5210 */
-
-+#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */
-+#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */
-+#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */
-+#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */
-+#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008
-+#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */
-+#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020
-+#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */
-+#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080
-+#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */
-+#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200
-+#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */
-+#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800
-+#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */
-+#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000
-+#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */
-+#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000
-+#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */
-+#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */
-+#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE)
-+#define AR5K_EEPROM_INFO_CKSUM 0xffff
-+#define AR5K_EEPROM_INFO(_n) (AR5K_EEPROM_INFO_BASE + (_n))
-+
-+#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */
-+#define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */
-+#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2GHz (AR5211_rfregs) */
-+#define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */
-+#define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */
-+#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */
-+#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */
-+#define AR5K_EEPROM_VERSION_4_1 0x4001 /* has ee_margin_tx_rx (eeprom_init) */
-+#define AR5K_EEPROM_VERSION_4_2 0x4002 /* has ee_cck_ofdm_gain_delta (eeprom_init) */
-+#define AR5K_EEPROM_VERSION_4_3 0x4003
-+#define AR5K_EEPROM_VERSION_4_4 0x4004
-+#define AR5K_EEPROM_VERSION_4_5 0x4005
-+#define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */
-+#define AR5K_EEPROM_VERSION_4_7 0x3007
-+
-+#define AR5K_EEPROM_MODE_11A 0
-+#define AR5K_EEPROM_MODE_11B 1
-+#define AR5K_EEPROM_MODE_11G 2
-+
-+#define AR5K_EEPROM_HDR AR5K_EEPROM_INFO(2) /* Header that contains the device caps */
-+#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1)
-+#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1)
-+#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1)
-+#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2GHz (?) */
-+#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for a/XR mode (eeprom_init) */
-+#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7)
-+#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5GHz (?) */
-+#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */
-+
-+/* Misc values available since EEPROM 4.0 */
-+#define AR5K_EEPROM_MISC0 AR5K_EEPROM_INFO(4)
-+#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff)
-+#define AR5K_EEPROM_HDR_XR2_DIS(_v) (((_v) >> 12) & 0x1)
-+#define AR5K_EEPROM_HDR_XR5_DIS(_v) (((_v) >> 13) & 0x1)
-+#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3)
-+#define AR5K_EEPROM_MISC1 AR5K_EEPROM_INFO(5)
-+#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff)
-+#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1)
-+
-+#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c
-+#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2
-+#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002
-+#define AR5K_EEPROM_RFKILL_POLARITY_S 1
-+
-+/* Newer EEPROMs are using a different offset */
-+#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \
-+ (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0)
-+
-+#define AR5K_EEPROM_ANT_GAIN(_v) AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3)
-+#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((int8_t)(((_v) >> 8) & 0xff))
-+#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((int8_t)((_v) & 0xff))
-+
-+/* calibration settings */
-+#define AR5K_EEPROM_MODES_11A(_v) AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4)
-+#define AR5K_EEPROM_MODES_11B(_v) AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2)
-+#define AR5K_EEPROM_MODES_11G(_v) AR5K_EEPROM_OFF(_v, 0x00da, 0x010d)
-+#define AR5K_EEPROM_CTL(_v) AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128) /* Conformance test limits */
-+#define AR5K_EEPROM_CHANNELS_5GHZ(_v) AR5K_EEPROM_OFF(_v, 0x0100, 0x0150) /* List of calibrated 5GHz chans */
-+#define AR5K_EEPROM_TARGET_PWR_OFF_11A(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_CHANNELS_5GHZ(_v) + 0x0055, 0x0000)
-+#define AR5K_EEPROM_TARGET_PWR_OFF_11B(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_CHANNELS_5GHZ(_v) + 0x0065, 0x0010)
-+#define AR5K_EEPROM_TARGET_PWR_OFF_11G(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_CHANNELS_5GHZ(_v) + 0x0069, 0x0014)
-+
-+/* [3.1 - 3.3] */
-+#define AR5K_EEPROM_OBDB0_2GHZ 0x00ec
-+#define AR5K_EEPROM_OBDB1_2GHZ 0x00ed
-+
- /*
- * EEPROM data register
- */
- #define AR5K_EEPROM_DATA_5211 0x6004
- #define AR5K_EEPROM_DATA_5210 0x6800
--#define AR5K_EEPROM_DATA (mac_version == AR5K_SREV_VER_AR5210 ? \
-+#define AR5K_EEPROM_DATA (mac_version == AR5K_SREV_MAC_AR5210 ? \
- AR5K_EEPROM_DATA_5210 : AR5K_EEPROM_DATA_5211)
-
- /*
- * EEPROM command register
- */
--#define AR5K_EEPROM_CMD 0x6008 /* Register Addres */
-+#define AR5K_EEPROM_CMD 0x6008 /* Register Address */
- #define AR5K_EEPROM_CMD_READ 0x00000001 /* EEPROM read */
- #define AR5K_EEPROM_CMD_WRITE 0x00000002 /* EEPROM write */
- #define AR5K_EEPROM_CMD_RESET 0x00000004 /* EEPROM reset */
-@@ -291,43 +307,163 @@ static const struct ath5k_srev_name ath5
- /*
- * EEPROM status register
- */
--#define AR5K_EEPROM_STAT_5210 0x6c00 /* Register Address [5210] */
--#define AR5K_EEPROM_STAT_5211 0x600c /* Register Address [5211+] */
--#define AR5K_EEPROM_STATUS (mac_version == AR5K_SREV_VER_AR5210 ? \
-+#define AR5K_EEPROM_STAT_5210 0x6c00 /* Register Address [5210] */
-+#define AR5K_EEPROM_STAT_5211 0x600c /* Register Address [5211+] */
-+#define AR5K_EEPROM_STATUS (mac_version == AR5K_SREV_MAC_AR5210 ? \
- AR5K_EEPROM_STAT_5210 : AR5K_EEPROM_STAT_5211)
- #define AR5K_EEPROM_STAT_RDERR 0x00000001 /* EEPROM read failed */
- #define AR5K_EEPROM_STAT_RDDONE 0x00000002 /* EEPROM read successful */
- #define AR5K_EEPROM_STAT_WRERR 0x00000004 /* EEPROM write failed */
- #define AR5K_EEPROM_STAT_WRDONE 0x00000008 /* EEPROM write successful */
-
--#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* Offset for EEPROM regulatory domain */
--#define AR5K_EEPROM_INFO_BASE 0x00c0 /* Offset for EEPROM header */
--#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE)
--#define AR5K_EEPROM_INFO_CKSUM 0xffff
--#define AR5K_EEPROM_INFO(_n) (AR5K_EEPROM_INFO_BASE + (_n))
--#define AR5K_EEPROM_MODE_11A 0
--#define AR5K_EEPROM_MODE_11B 1
--#define AR5K_EEPROM_MODE_11G 2
-+/*
-+ * EEPROM config register (?)
-+ */
-+#define AR5K_EEPROM_CFG 0x6010
-
--#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1)
-+/* Some EEPROM defines */
-+#define AR5K_EEPROM_EEP_SCALE 100
-+#define AR5K_EEPROM_EEP_DELTA 10
-+#define AR5K_EEPROM_N_MODES 3
-+#define AR5K_EEPROM_N_5GHZ_CHAN 10
-+#define AR5K_EEPROM_N_2GHZ_CHAN 3
-+#define AR5K_EEPROM_MAX_CHAN 10
-+#define AR5K_EEPROM_N_PCDAC 11
-+#define AR5K_EEPROM_N_TEST_FREQ 8
-+#define AR5K_EEPROM_N_EDGES 8
-+#define AR5K_EEPROM_N_INTERCEPTS 11
-+#define AR5K_EEPROM_FREQ_M(_v) AR5K_EEPROM_OFF(_v, 0x7f, 0xff)
-+#define AR5K_EEPROM_PCDAC_M 0x3f
-+#define AR5K_EEPROM_PCDAC_START 1
-+#define AR5K_EEPROM_PCDAC_STOP 63
-+#define AR5K_EEPROM_PCDAC_STEP 1
-+#define AR5K_EEPROM_NON_EDGE_M 0x40
-+#define AR5K_EEPROM_CHANNEL_POWER 8
-+#define AR5K_EEPROM_N_OBDB 4
-+#define AR5K_EEPROM_OBDB_DIS 0xffff
-+#define AR5K_EEPROM_CHANNEL_DIS 0xff
-+#define AR5K_EEPROM_SCALE_OC_DELTA(_x) (((_x) * 2) / 10)
-+#define AR5K_EEPROM_N_CTLS(_v) AR5K_EEPROM_OFF(_v, 16, 32)
-+#define AR5K_EEPROM_MAX_CTLS 32
-+#define AR5K_EEPROM_N_XPD_PER_CHANNEL 4
-+#define AR5K_EEPROM_N_XPD0_POINTS 4
-+#define AR5K_EEPROM_N_XPD3_POINTS 3
-+#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ 35
-+#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ 55
-+#define AR5K_EEPROM_POWER_M 0x3f
-+#define AR5K_EEPROM_POWER_MIN 0
-+#define AR5K_EEPROM_POWER_MAX 3150
-+#define AR5K_EEPROM_POWER_STEP 50
-+#define AR5K_EEPROM_POWER_TABLE_SIZE 64
-+#define AR5K_EEPROM_N_POWER_LOC_11B 4
-+#define AR5K_EEPROM_N_POWER_LOC_11G 6
-+#define AR5K_EEPROM_I_GAIN 10
-+#define AR5K_EEPROM_CCK_OFDM_DELTA 15
-+#define AR5K_EEPROM_N_IQ_CAL 2
-+
-+enum ath5k_ant_setting {
-+ AR5K_ANT_VARIABLE = 0, /* variable by programming */
-+ AR5K_ANT_FIXED_A = 1, /* fixed to 11a frequencies */
-+ AR5K_ANT_FIXED_B = 2, /* fixed to 11b frequencies */
-+ AR5K_ANT_MAX = 3,
-+};
-
--#define AR5K_EEPROM_HDR AR5K_EEPROM_INFO(2) /* Header that contains the device caps */
--#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1) /* Device has a support */
--#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1) /* Device has b support */
--#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1) /* Device has g support */
--#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz (?) */
--#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for a/XR mode (eeprom_init) */
--#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7)
--#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz (?) */
--#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */
-+/* Per channel calibration data, used for power table setup */
-+struct ath5k_chan_pcal_info {
-+ u_int16_t freq; /* Frequency */
-+ /* Power levels in dBm * 4 units */
-+ int16_t pwr_x0[AR5K_EEPROM_N_XPD0_POINTS];
-+ int16_t pwr_x3[AR5K_EEPROM_N_XPD3_POINTS];
-+ /* PCDAC tables in dBm * 2 units */
-+ u_int16_t pcdac_x0[AR5K_EEPROM_N_XPD0_POINTS];
-+ u_int16_t pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS];
-+ /* Max available power */
-+ u_int16_t max_pwr;
-+};
-
--/* Misc values available since EEPROM 4.0 */
--#define AR5K_EEPROM_MISC0 0x00c4
--#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff)
--#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3)
--#define AR5K_EEPROM_MISC1 0x00c5
--#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff)
--#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1)
-+/* Per rate calibration data for each mode, used for power table setup */
-+struct ath5k_rate_pcal_info {
-+ u_int16_t freq; /* Frequency */
-+ /* Power level for 6-24Mbit/s rates */
-+ u_int16_t target_power_6to24;
-+ /* Power level for 36Mbit rate */
-+ u_int16_t target_power_36;
-+ /* Power level for 48Mbit rate */
-+ u_int16_t target_power_48;
-+ /* Power level for 54Mbit rate */
-+ u_int16_t target_power_54;
-+};
-+
-+/* EEPROM calibration data */
-+struct ath5k_eeprom_info {
-+
-+ /* Header information */
-+ u_int16_t ee_magic;
-+ u_int16_t ee_protect;
-+ u_int16_t ee_regdomain;
-+ u_int16_t ee_version;
-+ u_int16_t ee_header;
-+ u_int16_t ee_ant_gain;
-+ u_int16_t ee_misc0;
-+ u_int16_t ee_misc1;
-+ u_int16_t ee_cck_ofdm_gain_delta;
-+ u_int16_t ee_cck_ofdm_power_delta;
-+ u_int16_t ee_scaled_cck_delta;
-+
-+ /* Used for tx thermal adjustment (eeprom_init, rfregs) */
-+ u_int16_t ee_tx_clip;
-+ u_int16_t ee_pwd_84;
-+ u_int16_t ee_pwd_90;
-+ u_int16_t ee_gain_select;
-+
-+ /* RF Calibration settings (reset, rfregs) */
-+ u_int16_t ee_i_cal[AR5K_EEPROM_N_MODES];
-+ u_int16_t ee_q_cal[AR5K_EEPROM_N_MODES];
-+ u_int16_t ee_fixed_bias[AR5K_EEPROM_N_MODES];
-+ u_int16_t ee_turbo_max_power[AR5K_EEPROM_N_MODES];
-+ u_int16_t ee_xr_power[AR5K_EEPROM_N_MODES];
-+ u_int16_t ee_switch_settling[AR5K_EEPROM_N_MODES];
-+ u_int16_t ee_ant_tx_rx[AR5K_EEPROM_N_MODES];
-+ u_int16_t ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC];
-+ u_int16_t ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
-+ u_int16_t ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
-+ u_int16_t ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES];
-+ u_int16_t ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES];
-+ u_int16_t ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES];
-+ u_int16_t ee_thr_62[AR5K_EEPROM_N_MODES];
-+ u_int16_t ee_xlna_gain[AR5K_EEPROM_N_MODES];
-+ u_int16_t ee_xpd[AR5K_EEPROM_N_MODES];
-+ u_int16_t ee_x_gain[AR5K_EEPROM_N_MODES];
-+ u_int16_t ee_i_gain[AR5K_EEPROM_N_MODES];
-+ u_int16_t ee_margin_tx_rx[AR5K_EEPROM_N_MODES];
-+
-+ /* Power calibration data */
-+ u_int16_t ee_false_detect[AR5K_EEPROM_N_MODES];
-+ u_int16_t ee_cal_piers_a;
-+ struct ath5k_chan_pcal_info ee_pwr_cal_a[AR5K_EEPROM_N_5GHZ_CHAN];
-+ u_int16_t ee_cal_piers_b;
-+ struct ath5k_chan_pcal_info ee_pwr_cal_b[AR5K_EEPROM_N_2GHZ_CHAN];
-+ u_int16_t ee_cal_piers_g;
-+ struct ath5k_chan_pcal_info ee_pwr_cal_g[AR5K_EEPROM_N_2GHZ_CHAN];
-+ /* Per rate target power levels */
-+ u_int16_t ee_rate_target_pwr_num_a;
-+ struct ath5k_rate_pcal_info ee_rate_tpwr_a[AR5K_EEPROM_N_5GHZ_CHAN];
-+ u_int16_t ee_rate_target_pwr_num_b;
-+ struct ath5k_rate_pcal_info ee_rate_tpwr_b[AR5K_EEPROM_N_2GHZ_CHAN];
-+ u_int16_t ee_rate_target_pwr_num_g;
-+ struct ath5k_rate_pcal_info ee_rate_tpwr_g[AR5K_EEPROM_N_2GHZ_CHAN];
-+
-+ /* Conformance test limits (Unused) */
-+ u_int16_t ee_ctls;
-+ u_int16_t ee_ctl[AR5K_EEPROM_MAX_CTLS];
-+
-+ /* Noise Floor Calibration settings */
-+ int16_t ee_noise_floor_thr[AR5K_EEPROM_N_MODES];
-+ int8_t ee_adc_desired_size[AR5K_EEPROM_N_MODES];
-+ int8_t ee_pga_desired_size[AR5K_EEPROM_N_MODES];
-+
-+ u_int32_t ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
-+};
-
- /*
- * Read data by masking
-@@ -350,7 +486,6 @@ static const struct ath5k_srev_name ath5
- (*((volatile u_int32_t *)(mem + (_reg))) = (_val))
- #endif
-
--
- #define AR5K_REG_ENABLE_BITS(_reg, _flags) \
- AR5K_REG_WRITE(_reg, AR5K_REG_READ(_reg) | (_flags))
-
-@@ -359,7 +494,12 @@ static const struct ath5k_srev_name ath5
-
- #define AR5K_TUNE_REGISTER_TIMEOUT 20000
-
--/* names for eeprom fields */
-+#define AR5K_EEPROM_READ(_o, _v) do { \
-+ if ((ret = ath5k_hw_eeprom_read(mem, (_o), &(_v), mac_version)) != 0) \
-+ return (ret); \
-+} while (0)
-+
-+/* Names for EEPROM fields */
- struct eeprom_entry {
- const char *name;
- int addr;
-@@ -375,8 +515,6 @@ static const struct eeprom_entry eeprom_
- {"regdomain", AR5K_EEPROM_REG_DOMAIN},
- };
-
--static const int eeprom_addr_len = sizeof(eeprom_addr) / sizeof(eeprom_addr[0]);
--
- static int force_write = 0;
- static int verbose = 0;
-
-@@ -398,8 +536,8 @@ static u_int32_t ath5k_hw_bitswap(u_int3
- /*
- * Get the PHY Chip revision
- */
--static u_int16_t
--ath5k_hw_radio_revision(u_int16_t mac_version, void *mem, u_int8_t chip)
-+static u_int16_t ath5k_hw_radio_revision(u_int16_t mac_version, void *mem,
-+ u_int8_t chip)
- {
- int i;
- u_int32_t srev;
-@@ -427,7 +565,7 @@ ath5k_hw_radio_revision(u_int16_t mac_ve
- for (i = 0; i < 8; i++)
- AR5K_REG_WRITE(AR5K_PHY(0x20), 0x00010000);
-
-- if (mac_version == AR5K_SREV_VER_AR5210) {
-+ if (mac_version == AR5K_SREV_MAC_AR5210) {
- srev = AR5K_REG_READ(AR5K_PHY(256) >> 28) & 0xf;
-
- ret = (u_int16_t)ath5k_hw_bitswap(srev, 4) + 1;
-@@ -447,9 +585,8 @@ ath5k_hw_radio_revision(u_int16_t mac_ve
- /*
- * Write to EEPROM
- */
--static int
--ath5k_hw_eeprom_write(void *mem, u_int32_t offset, u_int16_t data,
-- u_int8_t mac_version)
-+static int ath5k_hw_eeprom_write(void *mem, u_int32_t offset, u_int16_t data,
-+ u_int8_t mac_version)
- {
- u_int32_t status, timeout;
-
-@@ -457,7 +594,7 @@ ath5k_hw_eeprom_write(void *mem, u_int32
- * Initialize EEPROM access
- */
-
-- if (mac_version == AR5K_SREV_VER_AR5210) {
-+ if (mac_version == AR5K_SREV_MAC_AR5210) {
-
- AR5K_REG_ENABLE_BITS(AR5K_PCICFG, AR5K_PCICFG_EEAE);
-
-@@ -466,7 +603,7 @@ ath5k_hw_eeprom_write(void *mem, u_int32
-
- } else {
- /* not 5210 */
-- /* reset eeprom access */
-+ /* reset EEPROM access */
- AR5K_REG_WRITE(AR5K_EEPROM_CMD, AR5K_EEPROM_CMD_RESET);
- usleep(5);
-
-@@ -484,7 +621,7 @@ ath5k_hw_eeprom_write(void *mem, u_int32
- status = AR5K_REG_READ(AR5K_EEPROM_STATUS);
- if (status & AR5K_EEPROM_STAT_WRDONE) {
- if (status & AR5K_EEPROM_STAT_WRERR) {
-- err("eeprom write access to 0x%04x failed",
-+ err("EEPROM write access to 0x%04x failed",
- offset);
- return 1;
- }
-@@ -499,16 +636,15 @@ ath5k_hw_eeprom_write(void *mem, u_int32
- /*
- * Read from EEPROM
- */
--static int
--ath5k_hw_eeprom_read(void *mem, u_int32_t offset, u_int16_t *data,
-- u_int8_t mac_version)
-+static int ath5k_hw_eeprom_read(void *mem, u_int32_t offset, u_int16_t *data,
-+ u_int8_t mac_version)
- {
- u_int32_t status, timeout;
-
- /*
- * Initialize EEPROM access
- */
-- if (mac_version == AR5K_SREV_VER_AR5210) {
-+ if (mac_version == AR5K_SREV_MAC_AR5210) {
- AR5K_REG_ENABLE_BITS(AR5K_PCICFG, AR5K_PCICFG_EEAE);
- (void)AR5K_REG_READ(AR5K_EEPROM_BASE + (4 * offset));
- } else {
-@@ -531,50 +667,701 @@ ath5k_hw_eeprom_read(void *mem, u_int32_
- return 1;
- }
-
--static const char *ath5k_hw_get_part_name(enum ath5k_srev_type type,
-- u_int32_t val)
-+/*
-+ * Translate binary channel representation in EEPROM to frequency
-+ */
-+static u_int16_t ath5k_eeprom_bin2freq(struct ath5k_eeprom_info *ee,
-+ u_int16_t bin, unsigned int mode)
- {
-- const char *name = "xxxxx";
-- int i;
-+ u_int16_t val;
-
-- for (i = 0; i < ARRAY_SIZE(ath5k_srev_names); i++) {
-- if (ath5k_srev_names[i].sr_type != type ||
-- ath5k_srev_names[i].sr_val == AR5K_SREV_UNKNOWN)
-- continue;
-- if ((val & 0xff) < ath5k_srev_names[i + 1].sr_val) {
-- name = ath5k_srev_names[i].sr_name;
-+ if (bin == AR5K_EEPROM_CHANNEL_DIS)
-+ return bin;
-+
-+ if (mode == AR5K_EEPROM_MODE_11A) {
-+ if (ee->ee_version > AR5K_EEPROM_VERSION_3_2)
-+ val = (5 * bin) + 4800;
-+ else
-+ val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 :
-+ (bin * 10) + 5100;
-+ } else {
-+ if (ee->ee_version > AR5K_EEPROM_VERSION_3_2)
-+ val = bin + 2300;
-+ else
-+ val = bin + 2400;
-+ }
-+
-+ return val;
-+}
-+
-+/*
-+ * Read antenna info from EEPROM
-+ */
-+static int ath5k_eeprom_read_ants(void *mem, u_int8_t mac_version,
-+ struct ath5k_eeprom_info *ee,
-+ u_int32_t *offset, unsigned int mode)
-+{
-+ u_int32_t o = *offset;
-+ u_int16_t val;
-+ int ret, i = 0;
-+
-+ AR5K_EEPROM_READ(o++, val);
-+ ee->ee_switch_settling[mode] = (val >> 8) & 0x7f;
-+ ee->ee_ant_tx_rx[mode] = (val >> 2) & 0x3f;
-+ ee->ee_ant_control[mode][i] = (val << 4) & 0x3f;
-+
-+ AR5K_EEPROM_READ(o++, val);
-+ ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf;
-+ ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f;
-+ ee->ee_ant_control[mode][i++] = val & 0x3f;
-+
-+ AR5K_EEPROM_READ(o++, val);
-+ ee->ee_ant_control[mode][i++] = (val >> 10) & 0x3f;
-+ ee->ee_ant_control[mode][i++] = (val >> 4) & 0x3f;
-+ ee->ee_ant_control[mode][i] = (val << 2) & 0x3f;
-+
-+ AR5K_EEPROM_READ(o++, val);
-+ ee->ee_ant_control[mode][i++] |= (val >> 14) & 0x3;
-+ ee->ee_ant_control[mode][i++] = (val >> 8) & 0x3f;
-+ ee->ee_ant_control[mode][i++] = (val >> 2) & 0x3f;
-+ ee->ee_ant_control[mode][i] = (val << 4) & 0x3f;
-+
-+ AR5K_EEPROM_READ(o++, val);
-+ ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf;
-+ ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f;
-+ ee->ee_ant_control[mode][i++] = val & 0x3f;
-+
-+ /* Get antenna modes */
-+ ee->ee_antenna[mode][0] =
-+ (ee->ee_ant_control[mode][0] << 4) | 0x1;
-+ ee->ee_antenna[mode][AR5K_ANT_FIXED_A] =
-+ ee->ee_ant_control[mode][1] |
-+ (ee->ee_ant_control[mode][2] << 6) |
-+ (ee->ee_ant_control[mode][3] << 12) |
-+ (ee->ee_ant_control[mode][4] << 18) |
-+ (ee->ee_ant_control[mode][5] << 24);
-+ ee->ee_antenna[mode][AR5K_ANT_FIXED_B] =
-+ ee->ee_ant_control[mode][6] |
-+ (ee->ee_ant_control[mode][7] << 6) |
-+ (ee->ee_ant_control[mode][8] << 12) |
-+ (ee->ee_ant_control[mode][9] << 18) |
-+ (ee->ee_ant_control[mode][10] << 24);
-+
-+ /* return new offset */
-+ *offset = o;
-+
-+ return 0;
-+}
-+
-+/*
-+ * Read supported modes from EEPROM
-+ */
-+static int ath5k_eeprom_read_modes(void *mem, u_int8_t mac_version,
-+ struct ath5k_eeprom_info *ee,
-+ u_int32_t *offset, unsigned int mode)
-+{
-+ u_int32_t o = *offset;
-+ u_int16_t val;
-+ int ret;
-+
-+ AR5K_EEPROM_READ(o++, val);
-+ ee->ee_tx_end2xlna_enable[mode] = (val >> 8) & 0xff;
-+ ee->ee_thr_62[mode] = val & 0xff;
-+
-+ if (ee->ee_version <= AR5K_EEPROM_VERSION_3_2)
-+ ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28;
-+
-+ AR5K_EEPROM_READ(o++, val);
-+ ee->ee_tx_end2xpa_disable[mode] = (val >> 8) & 0xff;
-+ ee->ee_tx_frm2xpa_enable[mode] = val & 0xff;
-+
-+ AR5K_EEPROM_READ(o++, val);
-+ ee->ee_pga_desired_size[mode] = (val >> 8) & 0xff;
-+
-+ if ((val & 0xff) & 0x80)
-+ ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1);
-+ else
-+ ee->ee_noise_floor_thr[mode] = val & 0xff;
-+
-+ if (ee->ee_version <= AR5K_EEPROM_VERSION_3_2)
-+ ee->ee_noise_floor_thr[mode] =
-+ mode == AR5K_EEPROM_MODE_11A ? -54 : -1;
-+
-+ AR5K_EEPROM_READ(o++, val);
-+ ee->ee_xlna_gain[mode] = (val >> 5) & 0xff;
-+ ee->ee_x_gain[mode] = (val >> 1) & 0xf;
-+ ee->ee_xpd[mode] = val & 0x1;
-+
-+ if (ee->ee_version >= AR5K_EEPROM_VERSION_4_0)
-+ ee->ee_fixed_bias[mode] = (val >> 13) & 0x1;
-+
-+ if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) {
-+ AR5K_EEPROM_READ(o++, val);
-+ ee->ee_false_detect[mode] = (val >> 6) & 0x7f;
-+
-+ if (mode == AR5K_EEPROM_MODE_11A)
-+ ee->ee_xr_power[mode] = val & 0x3f;
-+ else {
-+ ee->ee_ob[mode][0] = val & 0x7;
-+ ee->ee_db[mode][0] = (val >> 3) & 0x7;
-+ }
-+ }
-+
-+ if (ee->ee_version < AR5K_EEPROM_VERSION_3_4) {
-+ ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN;
-+ ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA;
-+ } else {
-+ ee->ee_i_gain[mode] = (val >> 13) & 0x7;
-+
-+ AR5K_EEPROM_READ(o++, val);
-+ ee->ee_i_gain[mode] |= (val << 3) & 0x38;
-+
-+ if (mode == AR5K_EEPROM_MODE_11G)
-+ ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff;
-+ }
-+
-+ if (ee->ee_version >= AR5K_EEPROM_VERSION_4_0 &&
-+ mode == AR5K_EEPROM_MODE_11A) {
-+ ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
-+ ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
-+ }
-+
-+ if (ee->ee_version >= AR5K_EEPROM_VERSION_4_6 &&
-+ mode == AR5K_EEPROM_MODE_11G)
-+ ee->ee_scaled_cck_delta = (val >> 11) & 0x1f;
-+
-+ /* return new offset */
-+ *offset = o;
-+
-+ return 0;
-+}
-+
-+/*
-+ * Read per channel calibration info from EEPROM
-+ * This doesn't work on 2112+ chips (EEPROM versions >= 4.6),
-+ * I only tested it on 5213 + 5112. This is still work in progress...
-+ *
-+ * This info is used to calibrate the baseband power table. Imagine
-+ * that for each channel there is a power curve that's hw specific
-+ * (depends on amplifier) and we try to "correct" this curve using offests
-+ * we pass on to phy chip (baseband -> before amplifier) so that it can
-+ * use acurate power values when setting tx power (takes amplifier's performance
-+ * on each channel into account).
-+ *
-+ * EEPROM provides us with the offsets for some pre-calibrated channels
-+ * and we have to scale (to create the full table for these channels) and
-+ * interpolate (in order to create the table for any channel).
-+ */
-+static int ath5k_eeprom_read_pcal_info(void *mem, u_int8_t mac_version,
-+ struct ath5k_eeprom_info *ee,
-+ u_int32_t *offset, unsigned int mode)
-+{
-+ u_int32_t o = *offset;
-+ unsigned int i, c;
-+ int ret;
-+ u_int16_t val;
-+ struct ath5k_chan_pcal_info *chan_pcal_info;
-+ u_int16_t cal_piers;
-+
-+ switch (mode) {
-+ case AR5K_EEPROM_MODE_11A:
-+ chan_pcal_info = ee->ee_pwr_cal_a;
-+ cal_piers = ee->ee_cal_piers_a;
-+ break;
-+ case AR5K_EEPROM_MODE_11B:
-+ chan_pcal_info = ee->ee_pwr_cal_b;
-+ cal_piers = ee->ee_cal_piers_b;
-+ break;
-+ case AR5K_EEPROM_MODE_11G:
-+ chan_pcal_info = ee->ee_pwr_cal_g;
-+ cal_piers = ee->ee_cal_piers_g;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ for (i = 0; i < cal_piers; i++) {
-+ /* Power values in dBm * 4 */
-+ for (c = 0; c < AR5K_EEPROM_N_XPD0_POINTS; c++) {
-+ AR5K_EEPROM_READ(o++, val);
-+ chan_pcal_info[i].pwr_x0[c] = (val & 0xff);
-+ chan_pcal_info[i].pwr_x0[++c] = ((val >> 8) & 0xff);
-+ }
-+
-+ /* PCDAC steps (dBm * 2) */
-+ AR5K_EEPROM_READ(o++, val);
-+ chan_pcal_info[i].pcdac_x0[1] = (val & 0x1f);
-+ chan_pcal_info[i].pcdac_x0[2] = ((val >> 5) & 0x1f);
-+ chan_pcal_info[i].pcdac_x0[3] = ((val >> 10) & 0x1f);
-+
-+ /* No idea what these power levels are for (4 xpds ?)
-+ I got zeroes on my card and the EEPROM info
-+ dumps we found on the net also have weird values */
-+ AR5K_EEPROM_READ(o++, val);
-+ chan_pcal_info[i].pwr_x3[0] = (val & 0xff);
-+ chan_pcal_info[i].pwr_x3[1] = ((val >> 8) & 0xff);
-+
-+ AR5K_EEPROM_READ(o++, val);
-+ chan_pcal_info[i].pwr_x3[2] = (val & 0xff);
-+ /* It's weird but they put it here, that's the
-+ PCDAC starting step */
-+ chan_pcal_info[i].pcdac_x0[0] = ((val >> 8) & 0xff);
-+
-+ /* Static values seen on EEPROM info dumps */
-+ chan_pcal_info[i].pcdac_x3[0] = 20;
-+ chan_pcal_info[i].pcdac_x3[1] = 35;
-+ chan_pcal_info[i].pcdac_x3[2] = 63;
-+
-+ /* Last xpd0 power level is also channel maximum */
-+ chan_pcal_info[i].max_pwr = chan_pcal_info[i].pwr_x0[3];
-+
-+ /* Recreate pcdac_x0 table for this channel using pcdac steps */
-+ chan_pcal_info[i].pcdac_x0[1] += chan_pcal_info[i].pcdac_x0[0];
-+ chan_pcal_info[i].pcdac_x0[2] += chan_pcal_info[i].pcdac_x0[1];
-+ chan_pcal_info[i].pcdac_x0[3] += chan_pcal_info[i].pcdac_x0[2];
-+ }
-+
-+ /* return new offset */
-+ (*offset) = o;
-+
-+ return 0;
-+}
-+
-+/*
-+ * Read per rate target power (this is the maximum tx power
-+ * supported by the card). This info is used when setting
-+ * tx power, no matter the channel.
-+ *
-+ * This also works for v5 EEPROMs.
-+ */
-+static int ath5k_eeprom_read_target_rate_pwr_info(void *mem,
-+ u_int8_t mac_version,
-+ struct ath5k_eeprom_info *ee,
-+ u_int32_t *offset,
-+ unsigned int mode)
-+{
-+ u_int32_t o = *offset;
-+ u_int16_t val;
-+ struct ath5k_rate_pcal_info *rate_pcal_info;
-+ u_int16_t *rate_target_pwr_num;
-+ int ret, i;
-+
-+ switch (mode) {
-+ case AR5K_EEPROM_MODE_11A:
-+ rate_pcal_info = ee->ee_rate_tpwr_a;
-+ ee->ee_rate_target_pwr_num_a = AR5K_EEPROM_N_5GHZ_CHAN;
-+ rate_target_pwr_num = &ee->ee_rate_target_pwr_num_a;
-+ break;
-+ case AR5K_EEPROM_MODE_11B:
-+ rate_pcal_info = ee->ee_rate_tpwr_b;
-+ ee->ee_rate_target_pwr_num_b = 2; /* 3rd is g mode'ss 1st */
-+ rate_target_pwr_num = &ee->ee_rate_target_pwr_num_b;
-+ break;
-+ case AR5K_EEPROM_MODE_11G:
-+ rate_pcal_info = ee->ee_rate_tpwr_g;
-+ ee->ee_rate_target_pwr_num_g = AR5K_EEPROM_N_2GHZ_CHAN;
-+ rate_target_pwr_num = &ee->ee_rate_target_pwr_num_g;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ /* Different freq mask for older eeproms (<= v3.2) */
-+ if(ee->ee_version <= 0x3002){
-+ for (i = 0; i < (*rate_target_pwr_num); i++) {
-+ AR5K_EEPROM_READ(o++, val);
-+ rate_pcal_info[i].freq =
-+ ath5k_eeprom_bin2freq(ee, (val >> 9) & 0x7f, mode);
-+
-+ rate_pcal_info[i].target_power_6to24 = ((val >> 3) & 0x3f);
-+ rate_pcal_info[i].target_power_36 = (val << 3) & 0x3f;
-+
-+ AR5K_EEPROM_READ(o++, val);
-+
-+ if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS ||
-+ val == 0) {
-+ (*rate_target_pwr_num) = i;
-+ break;
-+ }
-+
-+ rate_pcal_info[i].target_power_36 |= ((val >> 13) & 0x7);
-+ rate_pcal_info[i].target_power_48 = ((val >> 7) & 0x3f);
-+ rate_pcal_info[i].target_power_54 = ((val >> 1) & 0x3f);
-+ }
-+ } else {
-+ for (i = 0; i < (*rate_target_pwr_num); i++) {
-+ AR5K_EEPROM_READ(o++, val);
-+ rate_pcal_info[i].freq =
-+ ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode);
-+
-+ rate_pcal_info[i].target_power_6to24 = ((val >> 2) & 0x3f);
-+ rate_pcal_info[i].target_power_36 = (val << 4) & 0x3f;
-+
-+ AR5K_EEPROM_READ(o++, val);
-+
-+ if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS ||
-+ val == 0) {
-+ (*rate_target_pwr_num) = i;
-+ break;
-+ }
-+
-+ rate_pcal_info[i].target_power_36 |= (val >> 12) & 0xf;
-+ rate_pcal_info[i].target_power_48 = ((val >> 6) & 0x3f);
-+ rate_pcal_info[i].target_power_54 = (val & 0x3f);
-+ }
-+ }
-+ /* return new offset */
-+ (*offset) = o;
-+
-+ return 0;
-+}
-+
-+/*
-+ * Initialize EEPROM & capabilities data
-+ */
-+static int ath5k_eeprom_init(void *mem, u_int8_t mac_version,
-+ struct ath5k_eeprom_info *ee)
-+{
-+ unsigned int mode, i;
-+ int ret;
-+ u_int32_t offset;
-+ u_int16_t val;
-+
-+ /* Initial TX thermal adjustment values */
-+ ee->ee_tx_clip = 4;
-+ ee->ee_pwd_84 = ee->ee_pwd_90 = 1;
-+ ee->ee_gain_select = 1;
-+
-+ /*
-+ * Read values from EEPROM and store them in the capability structure
-+ */
-+ AR5K_EEPROM_READ(AR5K_EEPROM_MAGIC, ee->ee_magic);
-+ AR5K_EEPROM_READ(AR5K_EEPROM_PROTECT, ee->ee_protect);
-+ AR5K_EEPROM_READ(AR5K_EEPROM_REG_DOMAIN, ee->ee_regdomain);
-+ AR5K_EEPROM_READ(AR5K_EEPROM_VERSION, ee->ee_version);
-+ AR5K_EEPROM_READ(AR5K_EEPROM_HDR, ee->ee_header);
-+
-+ /* Return if we have an old EEPROM */
-+ if (ee->ee_version < AR5K_EEPROM_VERSION_3_0)
-+ return 0;
-+
-+#ifdef notyet
-+ /*
-+ * Validate the checksum of the EEPROM date. There are some
-+ * devices with invalid EEPROMs.
-+ */
-+ for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) {
-+ AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val);
-+ cksum ^= val;
-+ }
-+ if (cksum != AR5K_EEPROM_INFO_CKSUM) {
-+ AR5K_PRINTF("Invalid EEPROM checksum 0x%04x\n", cksum);
-+ return -EIO;
-+ }
-+#endif
-+
-+ AR5K_EEPROM_READ(AR5K_EEPROM_ANT_GAIN(ee->ee_version), ee->ee_ant_gain);
-+
-+ if (ee->ee_version >= AR5K_EEPROM_VERSION_4_0) {
-+ AR5K_EEPROM_READ(AR5K_EEPROM_MISC0, ee->ee_misc0);
-+ AR5K_EEPROM_READ(AR5K_EEPROM_MISC1, ee->ee_misc1);
-+ }
-+
-+ if (ee->ee_version < AR5K_EEPROM_VERSION_3_3) {
-+ AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val);
-+ ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7;
-+ ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7;
-+
-+ AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val);
-+ ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7;
-+ ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7;
-+ }
-+
-+ /*
-+ * Get conformance test limit values
-+ */
-+ offset = AR5K_EEPROM_CTL(ee->ee_version);
-+ ee->ee_ctls = 0;
-+
-+ for (i = 0; i < AR5K_EEPROM_N_CTLS(ee->ee_version); i++) {
-+ AR5K_EEPROM_READ(offset++, val);
-+
-+ if (((val >> 8) & 0xff) == 0)
-+ break;
-+
-+ ee->ee_ctl[i] = (val >> 8) & 0xff;
-+ ee->ee_ctls++;
-+
-+ if ((val & 0xff) == 0)
- break;
-+
-+ ee->ee_ctl[i + 1] = val & 0xff;
-+ ee->ee_ctls++;
-+ }
-+
-+ /*
-+ * Get values for 802.11a (5GHz)
-+ */
-+ mode = AR5K_EEPROM_MODE_11A;
-+
-+ ee->ee_turbo_max_power[mode] =
-+ AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header);
-+
-+ offset = AR5K_EEPROM_MODES_11A(ee->ee_version);
-+
-+ ret = ath5k_eeprom_read_ants(mem, mac_version, ee, &offset, mode);
-+ if (ret)
-+ return ret;
-+
-+ AR5K_EEPROM_READ(offset++, val);
-+ ee->ee_adc_desired_size[mode] = (int8_t)((val >> 8) & 0xff);
-+ ee->ee_ob[mode][3] = (val >> 5) & 0x7;
-+ ee->ee_db[mode][3] = (val >> 2) & 0x7;
-+ ee->ee_ob[mode][2] = (val << 1) & 0x7;
-+
-+ AR5K_EEPROM_READ(offset++, val);
-+ ee->ee_ob[mode][2] |= (val >> 15) & 0x1;
-+ ee->ee_db[mode][2] = (val >> 12) & 0x7;
-+ ee->ee_ob[mode][1] = (val >> 9) & 0x7;
-+ ee->ee_db[mode][1] = (val >> 6) & 0x7;
-+ ee->ee_ob[mode][0] = (val >> 3) & 0x7;
-+ ee->ee_db[mode][0] = val & 0x7;
-+
-+ ret = ath5k_eeprom_read_modes(mem, mac_version, ee, &offset, mode);
-+ if (ret)
-+ return ret;
-+
-+ if (ee->ee_version >= AR5K_EEPROM_VERSION_4_1) {
-+ AR5K_EEPROM_READ(offset++, val);
-+ ee->ee_margin_tx_rx[mode] = val & 0x3f;
-+ }
-+
-+ /*
-+ * Get values for 802.11b (2.4GHz)
-+ */
-+ mode = AR5K_EEPROM_MODE_11B;
-+ offset = AR5K_EEPROM_MODES_11B(ee->ee_version);
-+
-+ ret = ath5k_eeprom_read_ants(mem, mac_version, ee, &offset, mode);
-+ if (ret)
-+ return ret;
-+
-+ AR5K_EEPROM_READ(offset++, val);
-+ ee->ee_adc_desired_size[mode] = (int8_t)((val >> 8) & 0xff);
-+ ee->ee_ob[mode][1] = (val >> 4) & 0x7;
-+ ee->ee_db[mode][1] = val & 0x7;
-+
-+ ret = ath5k_eeprom_read_modes(mem, mac_version, ee, &offset, mode);
-+ if (ret)
-+ return ret;
-+
-+ if (ee->ee_version >= AR5K_EEPROM_VERSION_4_0) {
-+ AR5K_EEPROM_READ(offset++, val);
-+
-+ ee->ee_cal_piers_b = 0;
-+
-+ ee->ee_pwr_cal_b[0].freq =
-+ ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
-+ if (ee->ee_pwr_cal_b[0].freq != AR5K_EEPROM_CHANNEL_DIS)
-+ ee->ee_cal_piers_b++;
-+
-+ ee->ee_pwr_cal_b[1].freq =
-+ ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode);
-+ if (ee->ee_pwr_cal_b[1].freq != AR5K_EEPROM_CHANNEL_DIS)
-+ ee->ee_cal_piers_b++;
-+
-+ AR5K_EEPROM_READ(offset++, val);
-+ ee->ee_pwr_cal_b[2].freq =
-+ ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
-+ if (ee->ee_pwr_cal_b[2].freq != AR5K_EEPROM_CHANNEL_DIS)
-+ ee->ee_cal_piers_b++;
-+ }
-+
-+ if (ee->ee_version >= AR5K_EEPROM_VERSION_4_1)
-+ ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
-+
-+ /*
-+ * Get values for 802.11g (2.4GHz)
-+ */
-+ mode = AR5K_EEPROM_MODE_11G;
-+ offset = AR5K_EEPROM_MODES_11G(ee->ee_version);
-+
-+ ret = ath5k_eeprom_read_ants(mem, mac_version, ee, &offset, mode);
-+ if (ret)
-+ return ret;
-+
-+ AR5K_EEPROM_READ(offset++, val);
-+ ee->ee_adc_desired_size[mode] = (signed short int)((val >> 8) & 0xff);
-+ ee->ee_ob[mode][1] = (val >> 4) & 0x7;
-+ ee->ee_db[mode][1] = val & 0x7;
-+
-+ ret = ath5k_eeprom_read_modes(mem, mac_version, ee, &offset, mode);
-+ if (ret)
-+ return ret;
-+
-+ if (ee->ee_version >= AR5K_EEPROM_VERSION_4_0) {
-+ AR5K_EEPROM_READ(offset++, val);
-+
-+ ee->ee_cal_piers_g = 0;
-+
-+ ee->ee_pwr_cal_g[0].freq =
-+ ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
-+ if (ee->ee_pwr_cal_g[0].freq != AR5K_EEPROM_CHANNEL_DIS)
-+ ee->ee_cal_piers_g++;
-+
-+ ee->ee_pwr_cal_g[1].freq =
-+ ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode);
-+ if (ee->ee_pwr_cal_g[1].freq != AR5K_EEPROM_CHANNEL_DIS)
-+ ee->ee_cal_piers_g++;
-+
-+ AR5K_EEPROM_READ(offset++, val);
-+ ee->ee_turbo_max_power[mode] = val & 0x7f;
-+ ee->ee_xr_power[mode] = (val >> 7) & 0x3f;
-+
-+ AR5K_EEPROM_READ(offset++, val);
-+ ee->ee_pwr_cal_g[2].freq =
-+ ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
-+ if (ee->ee_pwr_cal_g[2].freq != AR5K_EEPROM_CHANNEL_DIS)
-+ ee->ee_cal_piers_g++;
-+
-+ if (ee->ee_version >= AR5K_EEPROM_VERSION_4_1)
-+ ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
-+
-+ AR5K_EEPROM_READ(offset++, val);
-+ ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
-+ ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
-+
-+ if (ee->ee_version >= AR5K_EEPROM_VERSION_4_2) {
-+ AR5K_EEPROM_READ(offset++, val);
-+ ee->ee_cck_ofdm_gain_delta = val & 0xff;
- }
- }
-
-- return (name);
-+ /*
-+ * Read 5GHz EEPROM channels
-+ */
-+ offset = AR5K_EEPROM_CHANNELS_5GHZ(ee->ee_version);
-+ ee->ee_cal_piers_a = 0;
-+ for (i = 0; i < AR5K_EEPROM_N_5GHZ_CHAN; i++) {
-+ AR5K_EEPROM_READ(offset++, val);
-+
-+ if ((val & 0xff) == 0)
-+ break;
-+
-+ ee->ee_pwr_cal_a[i].freq =
-+ ath5k_eeprom_bin2freq(ee, val & 0xff, AR5K_EEPROM_MODE_11A);
-+ ee->ee_cal_piers_a++;
-+
-+ if (((val >> 8) & 0xff) == 0)
-+ break;
-+
-+ ee->ee_pwr_cal_a[++i].freq =
-+ ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, AR5K_EEPROM_MODE_11A);
-+ ee->ee_cal_piers_a++;
-+
-+ }
-+
-+ /*
-+ * Read power calibration info
-+ */
-+ mode = AR5K_EEPROM_MODE_11A;
-+ ret = ath5k_eeprom_read_pcal_info(mem, mac_version, ee, &offset, mode);
-+ if (ret)
-+ return ret;
-+
-+ mode = AR5K_EEPROM_MODE_11B;
-+ ret = ath5k_eeprom_read_pcal_info(mem, mac_version, ee, &offset, mode);
-+ if (ret)
-+ return ret;
-+
-+ mode = AR5K_EEPROM_MODE_11G;
-+ ret = ath5k_eeprom_read_pcal_info(mem, mac_version, ee, &offset, mode);
-+ if (ret)
-+ return ret;
-+
-+
-+ /*
-+ * Read per rate target power info
-+ */
-+ offset = AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1) + AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version);
-+ mode = AR5K_EEPROM_MODE_11A;
-+ ret = ath5k_eeprom_read_target_rate_pwr_info(mem, mac_version, ee, &offset, mode);
-+ if (ret)
-+ return ret;
-+
-+ offset = AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1) + AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version);
-+ mode = AR5K_EEPROM_MODE_11B;
-+ ret = ath5k_eeprom_read_target_rate_pwr_info(mem, mac_version, ee, &offset, mode);
-+ if (ret)
-+ return ret;
-+
-+ offset = AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1) + AR5K_EEPROM_TARGET_PWR_OFF_11G(ee->ee_version);
-+ mode = AR5K_EEPROM_MODE_11G;
-+ ret = ath5k_eeprom_read_target_rate_pwr_info(mem, mac_version, ee, &offset, mode);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static const char *ath5k_hw_get_mac_name(u_int8_t val)
-+{
-+ static char name[16];
-+ unsigned int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(ath5k_mac_names); i++) {
-+ if (val <= ath5k_mac_names[i].sr_val)
-+ break;
-+ }
-+
-+ if (val == ath5k_mac_names[i].sr_val)
-+ return ath5k_mac_names[i].sr_name;
-+
-+ snprintf(name, sizeof(name), "%s+", ath5k_mac_names[i - 1].sr_name);
-+ return name;
-+}
-+
-+static const char *ath5k_hw_get_phy_name(u_int8_t val)
-+{
-+ const char *name = "?????";
-+ unsigned int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(ath5k_phy_names); i++) {
-+ if (val < ath5k_phy_names[i + 1].sr_val) {
-+ name = ath5k_phy_names[i].sr_name;
-+ break;
-+ }
-+ }
-+
-+ return name;
- }
-
- /* returns -1 on unknown name */
- static int eeprom_name2addr(const char *name)
- {
-- int i;
-+ unsigned int i;
-+
- if (!name || !name[0])
- return -1;
-- for (i = 0; i < eeprom_addr_len; i++)
-+ for (i = 0; i < ARRAY_SIZE(eeprom_addr); i++)
- if (!strcmp(name, eeprom_addr[i].name))
- return eeprom_addr[i].addr;
- return -1;
--} /* eeprom_name2addr */
-+}
-
- /* returns "<unknown>" on unknown address */
- static const char *eeprom_addr2name(int addr)
- {
-- int i;
-- for (i = 0; i < eeprom_addr_len; i++)
-+ unsigned int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(eeprom_addr); i++)
- if (eeprom_addr[i].addr == addr)
- return eeprom_addr[i].name;
- return "<unknown>";
--} /* eeprom_addr2name */
-+}
-
--static int
--do_write_pairs(int anr, int argc, char **argv, unsigned char *mem,
-- int mac_version)
-+static int do_write_pairs(int anr, int argc, char **argv, unsigned char *mem,
-+ int mac_version)
- {
- #define MAX_NR_WRITES 16
- struct {
-@@ -635,7 +1422,7 @@ do_write_pairs(int anr, int argc, char *
- }
- anr++;
- i++;
-- } /* while (anr < (argc-1)) */
-+ }
-
- if (!(wr_ops_len = i)) {
- err("no (addr,val) pairs given");
-@@ -702,20 +1489,22 @@ do_write_pairs(int anr, int argc, char *
- }
-
- return errors ? 11 : 0;
--} /* do_write_pairs */
-+}
-
- static void usage(const char *n)
- {
-- int i;
-+ unsigned int i;
-
-- fprintf(stderr, "%s [-w [-g N:M]] [-v] [-f] [-d] <base_address> "
-+ fprintf(stderr, "%s [-w [-g N:M]] [-v] [-f] [-d] [-R addr] [-W addr val] <base_address> "
- "[<name1> <val1> [<name2> <val2> ...]]\n\n", n);
- fprintf(stderr,
- "-w write values into EEPROM\n"
- "-g N:M set GPIO N to level M (only used with -w)\n"
- "-v verbose output\n"
- "-f force; suppress question before writing\n"
-- "-d dump eeprom (file 'ath-eeprom-dump.bin' and screen)\n"
-+ "-d dump EEPROM (file 'ath-eeprom-dump.bin' and screen)\n"
-+ "-R <addr> read register at <addr> (hex)\n"
-+ "-W <addr> <val> write <val> (hex) into register at <addr> (hex)\n"
- "<base_address> device base address (see lspci output)\n\n");
-
- fprintf(stderr,
-@@ -725,8 +1514,8 @@ static void usage(const char *n)
- " %s -w <base_address> regdomain N\n\n"
- "- set a PCI id field to value N:\n"
- " %s -w <base_address> <field> N\n"
-- " where <field> is on of:\n ", n, n, n);
-- for (i = 0; i < eeprom_addr_len; i++)
-+ " where <field> is one of:\n ", n, n, n);
-+ for (i = 0; i < ARRAY_SIZE(eeprom_addr); i++)
- fprintf(stderr, " %s", eeprom_addr[i].name);
- fprintf(stderr, "\n\n");
- fprintf(stderr,
-@@ -739,19 +1528,457 @@ static void usage(const char *n)
- "unlawful radio transmissions!\n\n");
- }
-
-+static void dump_capabilities(struct ath5k_eeprom_info *ee)
-+{
-+ u_int8_t has_a, has_b, has_g, has_rfkill, turbog_dis, turboa_dis;
-+ u_int8_t xr2_dis, xr5_dis, has_crystal;
-+
-+ has_a = AR5K_EEPROM_HDR_11A(ee->ee_header);
-+ has_b = AR5K_EEPROM_HDR_11B(ee->ee_header);
-+ has_g = AR5K_EEPROM_HDR_11G(ee->ee_header);
-+ has_rfkill = AR5K_EEPROM_HDR_RFKILL(ee->ee_header);
-+ has_crystal = AR5K_EEPROM_HAS32KHZCRYSTAL(ee->ee_misc1);
-+ turbog_dis = AR5K_EEPROM_HDR_T_2GHZ_DIS(ee->ee_header);
-+ turboa_dis = AR5K_EEPROM_HDR_T_5GHZ_DIS(ee->ee_header);
-+ xr2_dis = AR5K_EEPROM_HDR_XR2_DIS(ee->ee_misc0);
-+ xr5_dis = AR5K_EEPROM_HDR_XR5_DIS(ee->ee_misc0);
-+
-+ printf("|================= Capabilities ================|\n");
-+
-+ printf("| 802.11a Support: ");
-+ if (has_a)
-+ printf(" yes |");
-+ else
-+ printf(" no |");
-+
-+ printf(" Turbo-A disabled:");
-+ if (turboa_dis)
-+ printf(" yes |\n");
-+ else
-+ printf(" no |\n");
-+
-+ printf("| 802.11b Support: ");
-+ if (has_b)
-+ printf(" yes |");
-+ else
-+ printf(" no |");
-+
-+ printf(" Turbo-G disabled:");
-+ if (turbog_dis)
-+ printf(" yes |\n");
-+ else
-+ printf(" no |\n");
-+
-+ printf("| 802.11g Support: ");
-+ if (has_g)
-+ printf(" yes |");
-+ else
-+ printf(" no |");
-+
-+ printf(" 2GHz XR disabled:");
-+ if (xr2_dis)
-+ printf(" yes |\n");
-+ else
-+ printf(" no |\n");
-+
-+ printf("| RFKill Support: ");
-+ if (has_rfkill)
-+ printf(" yes |");
-+ else
-+ printf(" no |");
-+
-+ printf(" 5GHz XR disabled:");
-+ if (xr5_dis)
-+ printf(" yes |\n");
-+ else
-+ printf(" no |\n");
-+
-+ if (has_crystal != 2) {
-+ printf("| 32kHz Crystal: ");
-+ if (has_crystal)
-+ printf(" yes |");
-+ else
-+ printf(" no |");
-+
-+ printf(" |\n");
-+ }
-+
-+ printf("\\===============================================/\n");
-+}
-+
-+static void dump_calinfo_for_mode(int mode, struct ath5k_eeprom_info *ee)
-+{
-+ int i;
-+
-+ printf("|=========================================================|\n");
-+ printf("| I power: 0x%02x |", ee->ee_i_cal[mode]);
-+ printf(" Q power: 0x%02x |\n", ee->ee_q_cal[mode]);
-+ printf("| Use fixed bias: 0x%02x |", ee->ee_fixed_bias[mode]);
-+ printf(" Max turbo power: 0x%02x |\n", ee->ee_turbo_max_power[mode]);
-+ printf("| Max XR power: 0x%02x |", ee->ee_xr_power[mode]);
-+ printf(" Switch Settling Time: 0x%02x |\n", ee->ee_switch_settling[mode]);
-+ printf("| Tx/Rx attenuation: 0x%02x |", ee->ee_ant_tx_rx[mode]);
-+ printf(" TX end to XLNA On: 0x%02x |\n", ee->ee_tx_end2xlna_enable[mode]);
-+ printf("| TX end to XPA Off: 0x%02x |", ee->ee_tx_end2xpa_disable[mode]);
-+ printf(" TX end to XPA On: 0x%02x |\n", ee->ee_tx_frm2xpa_enable[mode]);
-+ printf("| 62db Threshold: 0x%02x |", ee->ee_thr_62[mode]);
-+ printf(" XLNA gain: 0x%02x |\n", ee->ee_xlna_gain[mode]);
-+ printf("| XPD: 0x%02x |", ee->ee_xpd[mode]);
-+ printf(" XPD gain: 0x%02x |\n", ee->ee_x_gain[mode]);
-+ printf("| I gain: 0x%02x |", ee->ee_i_gain[mode]);
-+ printf(" Tx/Rx margin: 0x%02x |\n", ee->ee_margin_tx_rx[mode]);
-+ printf("| False detect backoff: 0x%02x |", ee->ee_false_detect[mode]);
-+ printf(" Noise Floor Threshold: %3d |\n", ee->ee_noise_floor_thr[mode]);
-+ printf("| ADC desired size: %3d |", ee->ee_adc_desired_size[mode]);
-+ printf(" PGA desired size: %3d |\n", ee->ee_pga_desired_size[mode]);
-+ printf("|=========================================================|\n");
-+ for (i = 0; i < AR5K_EEPROM_N_PCDAC; i++) {
-+ printf("| Antenna control %2i: 0x%02x |", i, ee->ee_ant_control[mode][i]);
-+ i++;
-+ printf(" Antenna control %2i: 0x%02x |\n", i, ee->ee_ant_control[mode][i]);
-+ }
-+ printf("|=========================================================|\n");
-+ for (i = 0; i < AR5K_EEPROM_N_OBDB; i++) {
-+ printf("| Octave Band %i: %2i |", i, ee->ee_ob[mode][i]);
-+ printf(" db %i: %2i |\n", i, ee->ee_db[mode][i]);
-+ }
-+ printf("\\=========================================================/\n");
-+}
-+
-+static void dump_power_calinfo_for_mode(int mode, struct ath5k_eeprom_info *ee)
-+{
-+ struct ath5k_chan_pcal_info *chan_pcal_info;
-+ u_int16_t cal_piers;
-+ int i, c;
-+
-+ switch (mode) {
-+ case AR5K_EEPROM_MODE_11A:
-+ chan_pcal_info = ee->ee_pwr_cal_a;
-+ cal_piers = ee->ee_cal_piers_a;
-+ break;
-+ case AR5K_EEPROM_MODE_11B:
-+ chan_pcal_info = ee->ee_pwr_cal_b;
-+ cal_piers = ee->ee_cal_piers_b;
-+ break;
-+ case AR5K_EEPROM_MODE_11G:
-+ chan_pcal_info = ee->ee_pwr_cal_g;
-+ cal_piers = ee->ee_cal_piers_g;
-+ break;
-+ default:
-+ return;
-+ }
-+
-+ printf("/=================== Per channel power calibration ====================\\\n");
-+ printf("| Freq | pwr_0 | pwr_1 | pwr_2 | pwr_3 |pwrx3_0|pwrx3_1|pwrx3_2|max_pwr|\n");
-+ printf("| | pcdac | pcdac | pcdac | pcdac | pcdac | pcdac | pcdac | |\n");
-+
-+ for (i = 0; i < cal_piers; i++) {
-+ char buf[16];
-+
-+ printf("|======|=======|=======|=======|=======|=======|=======|=======|=======|\n");
-+ printf("| %4i |", chan_pcal_info[i].freq);
-+ for (c = 0; c < AR5K_EEPROM_N_XPD0_POINTS; c++) {
-+ printf(" %2i.%02i |", chan_pcal_info[i].pwr_x0[c] / 4,
-+ chan_pcal_info[i].pwr_x0[c] % 4);
-+ }
-+ for (c = 0; c < AR5K_EEPROM_N_XPD3_POINTS; c++) {
-+ printf(" %2i.%02i |", chan_pcal_info[i].pwr_x3[c] / 4,
-+ chan_pcal_info[i].pwr_x3[c] % 4);
-+ }
-+ printf(" %2i.%02i |\n", chan_pcal_info[i].max_pwr / 4,
-+ chan_pcal_info[i].max_pwr % 4);
-+
-+ printf("| |");
-+ for (c = 0; c < AR5K_EEPROM_N_XPD0_POINTS; c++) {
-+ snprintf(buf, sizeof(buf), "[%i]",
-+ chan_pcal_info[i].pcdac_x0[c]);
-+ printf("%6s |", buf);
-+ }
-+ for (c = 0; c < AR5K_EEPROM_N_XPD3_POINTS; c++) {
-+ snprintf(buf, sizeof(buf), "[%i]",
-+ chan_pcal_info[i].pcdac_x3[c]);
-+ printf("%6s |", buf);
-+ }
-+ printf(" |\n");
-+
-+ }
-+ printf("\\======================================================================/\n");
-+}
-+
-+static void dump_rate_calinfo_for_mode(int mode, struct ath5k_eeprom_info *ee)
-+{
-+ int i;
-+ struct ath5k_rate_pcal_info *rate_pcal_info;
-+ u_int16_t rate_target_pwr_num;
-+
-+ switch (mode) {
-+ case AR5K_EEPROM_MODE_11A:
-+ rate_pcal_info = ee->ee_rate_tpwr_a;
-+ rate_target_pwr_num = ee->ee_rate_target_pwr_num_a;
-+ break;
-+ case AR5K_EEPROM_MODE_11B:
-+ rate_pcal_info = ee->ee_rate_tpwr_b;
-+ rate_target_pwr_num = ee->ee_rate_target_pwr_num_b;
-+ break;
-+ case AR5K_EEPROM_MODE_11G:
-+ rate_pcal_info = ee->ee_rate_tpwr_g;
-+ rate_target_pwr_num = ee->ee_rate_target_pwr_num_g;
-+ break;
-+ default:
-+ return;
-+ }
-+
-+ printf("/============== Per rate power calibration ===========\\\n");
-+ if (mode == AR5K_EEPROM_MODE_11B)
-+ printf("| Freq | 1Mbit/s | 2Mbit/s | 5.5Mbit/s | 11Mbit/s |\n");
-+ else
-+ printf("| Freq | 6-24Mbit/s | 36Mbit/s | 48Mbit/s | 54Mbit/s |\n");
-+
-+ for (i = 0; i < rate_target_pwr_num; i++) {
-+
-+ printf("|======|============|==========|===========|==========|\n");
-+ printf("| %4i |", rate_pcal_info[i].freq);
-+ printf(" %2i.%02i |",rate_pcal_info[i].target_power_6to24 /2,
-+ rate_pcal_info[i].target_power_6to24 % 2);
-+ printf(" %2i.%02i |",rate_pcal_info[i].target_power_36 /2,
-+ rate_pcal_info[i].target_power_36 % 2);
-+ printf(" %2i.%02i |",rate_pcal_info[i].target_power_48 /2,
-+ rate_pcal_info[i].target_power_48 % 2);
-+ printf(" %2i.%02i |\n",rate_pcal_info[i].target_power_54 /2,
-+ rate_pcal_info[i].target_power_54 % 2);
-+ }
-+ printf("\\=====================================================/\n");
-+}
-+
-+static u_int32_t extend_tu(u_int32_t base_tu, u_int32_t val, u_int32_t mask)
-+{
-+ u_int32_t result;
-+
-+ result = (base_tu & ~mask) | (val & mask);
-+ if ((base_tu & mask) > (val & mask))
-+ result += mask + 1;
-+ return result;
-+}
-+
-+static void dump_timers_register(void *mem, u_int16_t mac_version)
-+{
-+#define AR5K_TIMER0_5210 0x802c /* next TBTT */
-+#define AR5K_TIMER0_5211 0x8028
-+#define AR5K_TIMER0 (mac_version == AR5K_SREV_MAC_AR5210 ? \
-+ AR5K_TIMER0_5210 : AR5K_TIMER0_5211)
-+
-+#define AR5K_TIMER1_5210 0x8030 /* next DMA beacon */
-+#define AR5K_TIMER1_5211 0x802c
-+#define AR5K_TIMER1 (mac_version == AR5K_SREV_MAC_AR5210 ? \
-+ AR5K_TIMER1_5210 : AR5K_TIMER1_5211)
-+
-+#define AR5K_TIMER2_5210 0x8034 /* next SWBA interrupt */
-+#define AR5K_TIMER2_5211 0x8030
-+#define AR5K_TIMER2 (mac_version == AR5K_SREV_MAC_AR5210 ? \
-+ AR5K_TIMER2_5210 : AR5K_TIMER2_5211)
-+
-+#define AR5K_TIMER3_5210 0x8038 /* next ATIM window */
-+#define AR5K_TIMER3_5211 0x8034
-+#define AR5K_TIMER3 (mac_version == AR5K_SREV_MAC_AR5210 ? \
-+ AR5K_TIMER3_5210 : AR5K_TIMER3_5211)
-+
-+#define AR5K_TSF_L32_5210 0x806c /* TSF (lower 32 bits) */
-+#define AR5K_TSF_L32_5211 0x804c
-+#define AR5K_TSF_L32 (mac_version == AR5K_SREV_MAC_AR5210 ? \
-+ AR5K_TSF_L32_5210 : AR5K_TSF_L32_5211)
-+
-+#define AR5K_TSF_U32_5210 0x8070
-+#define AR5K_TSF_U32_5211 0x8050
-+#define AR5K_TSF_U32 (mac_version == AR5K_SREV_MAC_AR5210 ? \
-+ AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211)
-+
-+#define AR5K_BEACON_5210 0x8024
-+#define AR5K_BEACON_5211 0x8020
-+#define AR5K_BEACON (mac_version == AR5K_SREV_MAC_AR5210 ? \
-+ AR5K_BEACON_5210 : AR5K_BEACON_5211)
-+
-+#define AR5K_LAST_TSTP 0x8080
-+
-+ const int timer_mask = 0xffff;
-+
-+ u_int32_t timer0, timer1, timer2, timer3, now_tu;
-+ u_int32_t timer0_tu, timer1_tu, timer2_tu, timer3_tu;
-+ u_int64_t now_tsf;
-+
-+ timer0 = AR5K_REG_READ(AR5K_TIMER0); /* 0x0000ffff */
-+ timer1 = AR5K_REG_READ(AR5K_TIMER1_5211); /* 0x0007ffff */
-+ timer2 = AR5K_REG_READ(AR5K_TIMER2_5211); /* 0x?1ffffff */
-+ timer3 = AR5K_REG_READ(AR5K_TIMER3_5211); /* 0x0000ffff */
-+
-+ now_tsf = ((u_int64_t)AR5K_REG_READ(AR5K_TSF_U32_5211) << 32)
-+ | (u_int64_t)AR5K_REG_READ(AR5K_TSF_L32_5211);
-+
-+ now_tu = now_tsf >> 10;
-+
-+ timer0_tu = extend_tu(now_tu, timer0, 0xffff);
-+ printf("TIMER0: 0x%08x, TBTT: %5u, TU: 0x%08x\n", timer0,
-+ timer0 & timer_mask, timer0_tu);
-+ timer1_tu = extend_tu(now_tu, timer1 >> 3, 0x7ffff >> 3);
-+ printf("TIMER1: 0x%08x, DMAb: %5u, TU: 0x%08x (%+d)\n", timer1,
-+ (timer1 >> 3) & timer_mask, timer1_tu, timer1_tu - timer0_tu);
-+ timer2_tu = extend_tu(now_tu, timer2 >> 3, 0x1ffffff >> 3);
-+ printf("TIMER2: 0x%08x, SWBA: %5u, TU: 0x%08x (%+d)\n", timer2,
-+ (timer2 >> 3) & timer_mask, timer2_tu, timer2_tu - timer0_tu);
-+ timer3_tu = extend_tu(now_tu, timer3, 0xffff);
-+ printf("TIMER3: 0x%08x, ATIM: %5u, TU: 0x%08x (%+d)\n", timer3,
-+ timer3 & timer_mask, timer3_tu, timer3_tu - timer0_tu);
-+ printf("TSF: 0x%016llx, TSFTU: %5u, TU: 0x%08x\n",
-+ (unsigned long long)now_tsf, now_tu & timer_mask, now_tu);
-+
-+ printf("BEACON: 0x%08x\n", AR5K_REG_READ(AR5K_BEACON));
-+ printf("LAST_TSTP: 0x%08x\n", AR5K_REG_READ(AR5K_LAST_TSTP));
-+}
-+
-+#define AR5K_KEYTABLE_0_5210 0x9000
-+#define AR5K_KEYTABLE_0_5211 0x8800
-+#define AR5K_KEYTABLE_0 (mac_version == AR5K_SREV_MAC_AR5210 ? \
-+ AR5K_KEYTABLE_0_5210 : \
-+ AR5K_KEYTABLE_0_5211)
-+
-+#define AR5K_KEYTABLE(_n) (AR5K_KEYTABLE_0_5211 + ((_n) << 5))
-+#define AR5K_KEYTABLE_OFF(_n, x) (AR5K_KEYTABLE(_n) + ((x) << 2))
-+#define AR5K_KEYTABLE_VALID 0x00008000
-+
-+#define AR5K_KEYTABLE_SIZE_5210 64
-+#define AR5K_KEYTABLE_SIZE_5211 128
-+#define AR5K_KEYTABLE_SIZE (mac_version == AR5K_SREV_MAC_AR5210 ? \
-+ AR5K_KEYTABLE_SIZE_5210 : \
-+ AR5K_KEYTABLE_SIZE_5211)
-+
-+static void keycache_dump(void *mem, u_int16_t mac_version)
-+{
-+ int i, keylen;
-+ u_int32_t val0, val1, val2, val3, val4, keytype, ant, mac0, mac1;
-+
-+ /* dump all 128 entries */
-+ printf("Dumping keycache entries...\n");
-+ for (i = 0; i < AR5K_KEYTABLE_SIZE; i++) {
-+ mac1 = AR5K_REG_READ(AR5K_KEYTABLE_OFF(i, 7));
-+ if (mac1 & AR5K_KEYTABLE_VALID) {
-+ val0 = AR5K_REG_READ(AR5K_KEYTABLE_OFF(i, 0));
-+ val1 = AR5K_REG_READ(AR5K_KEYTABLE_OFF(i, 1));
-+ val2 = AR5K_REG_READ(AR5K_KEYTABLE_OFF(i, 2));
-+ val3 = AR5K_REG_READ(AR5K_KEYTABLE_OFF(i, 3));
-+ val4 = AR5K_REG_READ(AR5K_KEYTABLE_OFF(i, 4));
-+ keytype = AR5K_REG_READ(AR5K_KEYTABLE_OFF(i, 5));
-+ ant = keytype & 8;
-+ keytype &= ~8;
-+ switch (keytype) {
-+ case 0: /* WEP40 */ keylen = 40 / 8; break;
-+ case 1: /* WEP104 */ keylen = 104 / 8; break;
-+ case 3: /* WEP128 */ keylen = 128 / 8; break;
-+ case 4: /* TKIP */ keylen = 128 / 8; break;
-+ case 5: /* AES */ keylen = 128 / 8; break;
-+ case 6: /* CCM */ keylen = 128 / 8; break;
-+ default: keylen = 0; break;
-+ }
-+ mac0 = AR5K_REG_READ(AR5K_KEYTABLE_OFF(i, 6));
-+
-+ printf("[%3u] keytype %d [%s%s%s%s%s%s%s%s] mac %02x:%02x:%02x:%02x:%02x:%02x key:%08x-%08x-%08x-%08x-%08x\n",
-+ i,
-+ keytype,
-+ keytype == 0 ? "WEP40 " : "",
-+ keytype == 1 ? "WEP104" : "",
-+ keytype == 3 ? "WEP128" : "",
-+ keytype == 4 ? "TKIP " : "",
-+ keytype == 5 ? "AES " : "",
-+ keytype == 6 ? "CCM " : "",
-+ keytype == 7 ? "NULL " : "",
-+ ant == 8 ? "+ANT" : "",
-+ ((mac0 << 1) & 0xff),
-+ ((mac0 >> 7) & 0xff),
-+ ((mac0 >> 15) & 0xff),
-+ ((mac0 >> 23) & 0xff),
-+ ((mac1 << 1) & 0xff) | (mac0 >> 31),
-+ ((mac1 >> 7) & 0xff),
-+ val0, val1, val2, val3, val4);
-+ }
-+ }
-+}
-+
-+/* copy key index (0) to key index (idx) */
-+
-+static void keycache_copy(void *mem, u_int16_t mac_version, int idx)
-+{
-+ u_int32_t val0, val1, val2, val3, val4, keytype, mac0, mac1;
-+
-+ printf("Copying keycache entry 0 to %d\n", idx);
-+ if (idx < 0 || idx >= AR5K_KEYTABLE_SIZE) {
-+ printf("invalid keycache index\n");
-+ return;
-+ }
-+
-+ val0 = AR5K_REG_READ(AR5K_KEYTABLE_OFF(0, 0));
-+ val1 = AR5K_REG_READ(AR5K_KEYTABLE_OFF(0, 1));
-+ val2 = AR5K_REG_READ(AR5K_KEYTABLE_OFF(0, 2));
-+ val3 = AR5K_REG_READ(AR5K_KEYTABLE_OFF(0, 3));
-+ val4 = AR5K_REG_READ(AR5K_KEYTABLE_OFF(0, 4));
-+ keytype = AR5K_REG_READ(AR5K_KEYTABLE_OFF(0, 5));
-+ mac0 = AR5K_REG_READ(AR5K_KEYTABLE_OFF(0, 6));
-+ mac1 = AR5K_REG_READ(AR5K_KEYTABLE_OFF(0, 7));
-+
-+ AR5K_REG_WRITE(AR5K_KEYTABLE_OFF(idx, 0), val0);
-+ AR5K_REG_WRITE(AR5K_KEYTABLE_OFF(idx, 1), val1);
-+ AR5K_REG_WRITE(AR5K_KEYTABLE_OFF(idx, 2), val2);
-+ AR5K_REG_WRITE(AR5K_KEYTABLE_OFF(idx, 3), val3);
-+ AR5K_REG_WRITE(AR5K_KEYTABLE_OFF(idx, 4), val4);
-+ AR5K_REG_WRITE(AR5K_KEYTABLE_OFF(idx, 5), keytype);
-+ AR5K_REG_WRITE(AR5K_KEYTABLE_OFF(idx, 6), mac0);
-+ AR5K_REG_WRITE(AR5K_KEYTABLE_OFF(idx, 7), mac1);
-+}
-+
-+static void sta_id0_id1_dump(void *mem)
-+{
-+#define AR5K_STA_ID0 0x8000
-+#define AR5K_STA_ID1 0x8004
-+#define AR5K_STA_ID1_AP 0x00010000
-+#define AR5K_STA_ID1_ADHOC 0x00020000
-+#define AR5K_STA_ID1_NO_KEYSRCH 0x00080000
-+
-+ u_int32_t sta_id0, sta_id1;
-+
-+ sta_id0 = AR5K_REG_READ(AR5K_STA_ID0);
-+ sta_id1 = AR5K_REG_READ(AR5K_STA_ID1);
-+ printf("STA_ID0: %02x:%02x:%02x:%02x:%02x:%02x\n",
-+ (sta_id0 >> 0) & 0xff,
-+ (sta_id0 >> 8) & 0xff,
-+ (sta_id0 >> 16) & 0xff,
-+ (sta_id0 >> 24) & 0xff,
-+ (sta_id1 >> 0) & 0xff,
-+ (sta_id1 >> 8) & 0xff);
-+ printf("STA_ID1: 0x%08x, AP: %d, IBSS: %d, KeyCache Disable: %d\n",
-+ sta_id1,
-+ sta_id1 & AR5K_STA_ID1_AP ? 1 : 0,
-+ sta_id1 & AR5K_STA_ID1_ADHOC ? 1 : 0,
-+ sta_id1 & AR5K_STA_ID1_NO_KEYSRCH ? 1 : 0);
-+}
-+
- int
- CMD(athinfo)(int argc, char *argv[])
- {
-- u_int32_t dev_addr;
-- u_int16_t eeprom_header, srev, phy_rev_5ghz, phy_rev_2ghz;
-- u_int16_t eeprom_version, mac_version, regdomain, has_crystal, ee_magic;
-- u_int8_t error, has_a, has_b, has_g, has_rfkill, eeprom_size;
-- int byte_size = 0;
-+ unsigned long long dev_addr;
-+ u_int16_t srev, phy_rev_5ghz, phy_rev_2ghz, ee_magic;
-+ u_int8_t mac_version, mac_revision;
-+ u_int8_t error, eeprom_size, dev_type, eemap;
-+ struct ath5k_eeprom_info *ee;
-+ unsigned int byte_size = 0;
- void *mem;
- int fd;
-- int i, anr = 1;
-+ unsigned int i;
-+ int anr = 1;
- int do_write = 0; /* default: read only */
- int do_dump = 0;
-+ int reg_read = 0;
-+ int reg_write = 0;
-+ unsigned int reg_write_val = 0;
-+ unsigned int timer_count = 1;
-+ int do_keycache_dump = 0;
-+ int keycache_copy_idx = 0;
-
- struct {
- int valid;
-@@ -759,7 +1986,7 @@ CMD(athinfo)(int argc, char *argv[])
- } gpio_set[AR5K_NUM_GPIO];
- int nr_gpio_set = 0;
-
-- for (i = 0; i < sizeof(gpio_set) / sizeof(gpio_set[0]); i++)
-+ for (i = 0; i < ARRAY_SIZE(gpio_set); i++)
- gpio_set[i].valid = 0;
-
- if (argc < 2) {
-@@ -769,6 +1996,15 @@ CMD(athinfo)(int argc, char *argv[])
-
- while (anr < argc && argv[anr][0] == '-') {
- switch (argv[anr][1]) {
-+ case 't':
-+ if (++anr < argc) {
-+ timer_count = atoi(argv[anr]);
-+ printf("timer_count:%d\n", timer_count);
-+ } else {
-+ usage(argv[0]);
-+ return 0;
-+ }
-+ break;
- case 'w':
- do_write = 1;
- break;
-@@ -777,7 +2013,7 @@ CMD(athinfo)(int argc, char *argv[])
- if (strlen(argv[anr]) != 3 || argv[anr][1] != ':' ||
- argv[anr][0] < '0' || argv[anr][0] > '5' ||
- (argv[anr][2] != '0' && argv[anr][2] != '1')) {
-- err("invalid gpio spec. %s", argv[anr]);
-+ err("invalid GPIO spec. %s", argv[anr]);
- return 2;
- }
- gpio_set[argv[anr][0] - '0'].valid = 1;
-@@ -797,6 +2033,25 @@ CMD(athinfo)(int argc, char *argv[])
- do_dump = 1;
- break;
-
-+ case 'R':
-+ anr++;
-+ reg_read = strtoul(argv[anr], NULL, 16);
-+ break;
-+
-+ case 'W':
-+ anr++;
-+ reg_write = strtoul(argv[anr++], NULL, 16);
-+ reg_write_val = strtoul(argv[anr], NULL, 16);
-+ break;
-+
-+ case 'k':
-+ do_keycache_dump = 1;
-+ break;
-+
-+ case 'K':
-+ keycache_copy_idx = atoi(argv[++anr]);
-+ break;
-+
- case 'h':
- usage(argv[0]);
- return 0;
-@@ -805,10 +2060,10 @@ CMD(athinfo)(int argc, char *argv[])
- default:
- err("unknown option %s", argv[anr]);
- return 2;
-- } /* switch (argv[anr][1]) */
-+ }
-
- anr++;
-- } /* while (anr < argc && ...) */
-+ }
-
- if (anr >= argc) {
- err("missing device address");
-@@ -816,7 +2071,7 @@ CMD(athinfo)(int argc, char *argv[])
- return 3;
- }
-
-- dev_addr = strtoul(argv[anr], NULL, 16);
-+ dev_addr = strtoull(argv[anr], NULL, 16);
-
- fd = open("/dev/mem", O_RDWR);
- if (fd < 0) {
-@@ -828,7 +2083,7 @@ CMD(athinfo)(int argc, char *argv[])
- MAP_SHARED | MAP_FILE, fd, dev_addr);
-
- if (mem == MAP_FAILED) {
-- printf("Mmap of device at 0x%08X for 0x%X bytes failed - "
-+ printf("mmap of device at 0x%08llX for 0x%X bytes failed - "
- "%s\n", dev_addr, AR5K_PCI_MEM_SIZE, strerror(errno));
- return -3;
- }
-@@ -856,10 +2111,31 @@ CMD(athinfo)(int argc, char *argv[])
- AR5K_REG_DISABLE_BITS(AR5K_PCICFG, AR5K_PCICFG_SPWR_DN);
- usleep(500);
-
-+ if (reg_read) {
-+ printf("READ %04x = %08x\n", reg_read, AR5K_REG_READ(reg_read));
-+ return 0;
-+ }
-+
-+ if (reg_write) {
-+ printf("WRITE %04x = %08x\n", reg_write, reg_write_val);
-+ AR5K_REG_WRITE(reg_write, reg_write_val);
-+ return 0;
-+ }
-+
- srev = AR5K_REG_READ(AR5K_SREV);
-- mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER) << 4;
-+ if (srev >= 0x0100) {
-+ printf("MAC revision 0x%04x is not supported!\n", srev);
-+ return -1;
-+ }
-+ mac_version = srev & AR5K_SREV_VER;
-+ mac_revision = srev & AR5K_SREV_REV;
-
-- /* Verify eeprom magic value first */
-+ printf(" -==Device Information==-\n");
-+
-+ printf("MAC Revision: %-5s (0x%02x)\n",
-+ ath5k_hw_get_mac_name(mac_revision), mac_revision);
-+
-+ /* Verify EEPROM magic value first */
- error = ath5k_hw_eeprom_read(mem, AR5K_EEPROM_MAGIC, &ee_magic,
- mac_version);
-
-@@ -872,157 +2148,114 @@ CMD(athinfo)(int argc, char *argv[])
- printf("Warning: Invalid EEPROM Magic number!\n");
- }
-
-- error = ath5k_hw_eeprom_read(mem, AR5K_EEPROM_HDR, &eeprom_header,
-- mac_version);
--
-- if (error) {
-- printf("Unable to read EEPROM Header!\n");
-- return -1;
-- }
--
-- error = ath5k_hw_eeprom_read(mem, AR5K_EEPROM_VERSION, &eeprom_version,
-- mac_version);
--
-- if (error) {
-- printf("Unable to read EEPROM version!\n");
-+ ee = calloc(sizeof(struct ath5k_eeprom_info), 1);
-+ if (!ee) {
-+ printf("Cannot allocate memory for EEPROM information\n");
- return -1;
- }
-
-- error = ath5k_hw_eeprom_read(mem, AR5K_EEPROM_REG_DOMAIN, &regdomain,
-- mac_version);
--
-- if (error) {
-- printf("Unable to read Regdomain!\n");
-+ if (ath5k_eeprom_init(mem, mac_version, ee)) {
-+ printf("EEPROM init failed\n");
- return -1;
- }
-
-- if (eeprom_version >= 0x4000) {
-- error = ath5k_hw_eeprom_read(mem, AR5K_EEPROM_MISC0,
-- &has_crystal, mac_version);
--
-- if (error) {
-- printf("Unable to read EEPROM Misc data!\n");
-- return -1;
-- }
--
-- has_crystal = AR5K_EEPROM_HAS32KHZCRYSTAL(has_crystal);
-- } else {
-- has_crystal = 2;
-- }
--
- eeprom_size = AR5K_REG_MS(AR5K_REG_READ(AR5K_PCICFG),
- AR5K_PCICFG_EESIZE);
-
-- has_a = AR5K_EEPROM_HDR_11A(eeprom_header);
-- has_b = AR5K_EEPROM_HDR_11B(eeprom_header);
-- has_g = AR5K_EEPROM_HDR_11G(eeprom_header);
-- has_rfkill = AR5K_EEPROM_HDR_RFKILL(eeprom_header);
-+ dev_type = AR5K_EEPROM_HDR_DEVICE(ee->ee_header);
-+ eemap = AR5K_EEPROM_EEMAP(ee->ee_misc0);
-
-- if (has_a)
-+ /* 1 = ?? 2 = ?? 3 = card 4 = wmac */
-+ printf("Device type: %1i\n", dev_type);
-+
-+ if (AR5K_EEPROM_HDR_11A(ee->ee_header))
- phy_rev_5ghz = ath5k_hw_radio_revision(mac_version, mem, 1);
- else
- phy_rev_5ghz = 0;
-
-- if (has_b)
-+ if (AR5K_EEPROM_HDR_11B(ee->ee_header))
- phy_rev_2ghz = ath5k_hw_radio_revision(mac_version, mem, 0);
- else
- phy_rev_2ghz = 0;
-
-- printf(" -==Device Information==-\n");
--
-- printf("MAC Version: %-5s (0x%02x)\n",
-- ath5k_hw_get_part_name(AR5K_VERSION_VER, mac_version),
-- mac_version);
--
-- printf("MAC Revision: %-5s (0x%02x)\n",
-- ath5k_hw_get_part_name(AR5K_VERSION_VER, srev), srev);
--
-- /* Single-chip PHY with a/b/g support */
-- if (has_b && !phy_rev_2ghz) {
-- printf("PHY Revision: %-5s (0x%02x)\n",
-- ath5k_hw_get_part_name(AR5K_VERSION_RAD, phy_rev_5ghz),
-- phy_rev_5ghz);
-- phy_rev_5ghz = 0;
-- }
--
-- /* Single-chip PHY with b/g support */
-- if (!has_a) {
-- printf("PHY Revision: %-5s (0x%02x)\n",
-- ath5k_hw_get_part_name(AR5K_VERSION_RAD, phy_rev_2ghz),
-- phy_rev_2ghz);
-- phy_rev_2ghz = 0;
-- }
--
-- /* Different chip for 5Ghz and 2Ghz */
- if (phy_rev_5ghz) {
-- printf("5Ghz PHY Revision: %-5s (0x%2x)\n",
-- ath5k_hw_get_part_name(AR5K_VERSION_RAD, phy_rev_5ghz),
-- phy_rev_5ghz);
-+ printf("5GHz PHY Revision: %-5s (0x%02x)\n",
-+ ath5k_hw_get_phy_name(phy_rev_5ghz), phy_rev_5ghz);
- }
- if (phy_rev_2ghz) {
-- printf("2Ghz PHY Revision: %-5s (0x%2x)\n",
-- ath5k_hw_get_part_name(AR5K_VERSION_RAD, phy_rev_2ghz),
-- phy_rev_2ghz);
-+ printf("2GHz PHY Revision: %-5s (0x%02x)\n",
-+ ath5k_hw_get_phy_name(phy_rev_2ghz), phy_rev_2ghz);
- }
-
-- printf(" -==EEPROM Information==-\n");
--
-- printf("EEPROM Version: %x.%x\n",
-- (eeprom_version & 0xF000) >> 12, eeprom_version & 0xFFF);
-+ printf("\n");
-+ printf("/============== EEPROM Information =============\\\n");
-+ printf("| EEPROM Version: %1x.%1x |",
-+ (ee->ee_version & 0xF000) >> 12, ee->ee_version & 0xFFF);
-
-- printf("EEPROM Size: ");
-+ printf(" EEPROM Size: ");
-
- if (eeprom_size == 0) {
-- printf(" 4K\n");
-- byte_size = 4096;
-+ printf(" 4 kbit |\n");
-+ byte_size = 4096 / 8;
- } else if (eeprom_size == 1) {
-- printf(" 8K\n");
-- byte_size = 8192;
-+ printf(" 8 kbit |\n");
-+ byte_size = 8192 / 8;
- } else if (eeprom_size == 2) {
-- printf(" 16K\n");
-- byte_size = 16384;
-+ printf(" 16 kbit |\n");
-+ byte_size = 16384 / 8;
- } else
-- printf(" ??\n");
-+ printf(" unknown |\n");
-
-- printf("Regulatory Domain: 0x%X\n", regdomain);
--
-- printf(" -==== Capabilities ====-\n");
--
-- printf("| 802.11a Support: ");
-- if (has_a)
-- printf("yes |\n");
-- else
-- printf("no |\n");
--
-- printf("| 802.11b Support: ");
-- if (has_b)
-- printf("yes |\n");
-- else
-- printf("no |\n");
-+ printf("| EEMAP: %i |", eemap);
-
-- printf("| 802.11g Support: ");
-- if (has_g)
-- printf("yes |\n");
-- else
-- printf("no |\n");
-+ printf(" Reg. Domain: 0x%02X |\n", ee->ee_regdomain);
-
-- printf("| RFKill Support: ");
-- if (has_rfkill)
-- printf("yes |\n");
-- else
-- printf("no |\n");
-+ dump_capabilities(ee);
-+ printf("\n");
-
-- if (has_crystal != 2) {
-- printf("| 32KHz Crystal: ");
-- if (has_crystal)
-- printf("yes |\n");
-- else
-- printf("no |\n");
-+ printf("/=========================================================\\\n");
-+ printf("| Calibration data common for all modes |\n");
-+ printf("|=========================================================|\n");
-+ printf("| CCK/OFDM gain delta: %2i |\n", ee->ee_cck_ofdm_gain_delta);
-+ printf("| CCK/OFDM power delta: %2i |\n", ee->ee_cck_ofdm_power_delta);
-+ printf("| Scaled CCK delta: %2i |\n", ee->ee_scaled_cck_delta);
-+ printf("| 2GHz Antenna gain: %2i |\n", AR5K_EEPROM_ANT_GAIN_2GHZ(ee->ee_ant_gain));
-+ printf("| 5GHz Antenna gain: %2i |\n", AR5K_EEPROM_ANT_GAIN_5GHZ(ee->ee_ant_gain));
-+ printf("| Turbo 2W maximum dBm: %2i |\n", AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header));
-+ printf("| Target power start: 0x%03x |\n", AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1));
-+ printf("| EAR Start: 0x%03x |\n", AR5K_EEPROM_EARSTART(ee->ee_misc0));
-+ printf("\\=========================================================/\n");
-+
-+ printf("\n");
-+ if (AR5K_EEPROM_HDR_11A(ee->ee_header)) {
-+ printf("/=========================================================\\\n");
-+ printf("| Calibration data for 802.11a operation |\n");
-+ dump_calinfo_for_mode(AR5K_EEPROM_MODE_11A, ee);
-+ dump_rate_calinfo_for_mode(AR5K_EEPROM_MODE_11A, ee);
-+ dump_power_calinfo_for_mode(AR5K_EEPROM_MODE_11A, ee);
-+ printf("\n");
-+ }
-+
-+ if (AR5K_EEPROM_HDR_11B(ee->ee_header)) {
-+ printf("/=========================================================\\\n");
-+ printf("| Calibration data for 802.11b operation |\n");
-+ dump_calinfo_for_mode(AR5K_EEPROM_MODE_11B, ee);
-+ dump_rate_calinfo_for_mode(AR5K_EEPROM_MODE_11B, ee);
-+ dump_power_calinfo_for_mode(AR5K_EEPROM_MODE_11B, ee);
-+ printf("\n");
-+ }
-+
-+ if (AR5K_EEPROM_HDR_11G(ee->ee_header)) {
-+ printf("/=========================================================\\\n");
-+ printf("| Calibration data for 802.11g operation |\n");
-+ dump_calinfo_for_mode(AR5K_EEPROM_MODE_11G, ee);
-+ dump_rate_calinfo_for_mode(AR5K_EEPROM_MODE_11G, ee);
-+ dump_power_calinfo_for_mode(AR5K_EEPROM_MODE_11G, ee);
-+ printf("\n");
- }
-- printf(" ========================\n");
-
- /* print current GPIO settings */
-- printf("GPIO registers: CR %08x DO %08x DI %08x\n",
-+ printf("GPIO registers: CR 0x%08x, DO 0x%08x, DI 0x%08x\n",
- AR5K_REG_READ(AR5K_GPIOCR), AR5K_REG_READ(AR5K_GPIODO),
- AR5K_REG_READ(AR5K_GPIODI));
-
-@@ -1030,18 +2263,18 @@ CMD(athinfo)(int argc, char *argv[])
- u_int16_t data;
- FILE *dumpfile = fopen("ath-eeprom-dump.bin", "w");
-
-- printf("\nEEPROM dump (%d byte)\n", byte_size);
-+ printf("\nEEPROM dump (%d bytes)\n", byte_size);
- printf("==============================================");
-- for (i = 1; i <= (byte_size / 2); i++) {
-+ for (i = 0; i < byte_size / 2; i++) {
- error =
- ath5k_hw_eeprom_read(mem, i, &data, mac_version);
- if (error) {
- printf("\nUnable to read at %04x\n", i);
- continue;
- }
-- if (!((i - 1) % 8))
-- printf("\n%04x: ", i);
-- printf("%04x ", data);
-+ if (!(i % 8))
-+ printf("\n%04x: ", i);
-+ printf(" %04x", data);
- fwrite(&data, 2, 1, dumpfile);
- }
- printf("\n==============================================\n");
-@@ -1054,18 +2287,18 @@ CMD(athinfo)(int argc, char *argv[])
- u_int32_t old_cr = rcr, old_do = rdo;
- int rc;
-
-- if (mac_version >= AR5K_SREV_VER_AR5213 && !nr_gpio_set) {
-- dbg("new MAC %x (>= AR5213) set gpio4 to low",
-+ if (mac_version >= AR5K_SREV_MAC_AR5213 && !nr_gpio_set) {
-+ dbg("new MAC %x (>= AR5213) set GPIO4 to low",
- mac_version);
- gpio_set[4].valid = 1;
- gpio_set[4].value = 0;
- }
-
-- /* set gpios */
-+ /* set GPIOs */
- dbg("old GPIO CR %08x DO %08x DI %08x",
- rcr, rdo, AR5K_REG_READ(AR5K_GPIODI));
-
-- for (i = 0; i < sizeof(gpio_set) / sizeof(gpio_set[0]); i++) {
-+ for (i = 0; i < ARRAY_SIZE(gpio_set); i++) {
- if (gpio_set[i].valid) {
- rcr |= AR5K_GPIOCR_OUT(i); /* we use mode 3 */
- rcr &= ~AR5K_GPIOCR_INT_SEL(i);
-@@ -1111,5 +2344,17 @@ CMD(athinfo)(int argc, char *argv[])
-
- return rc;
- }
-+
-+ sta_id0_id1_dump(mem);
-+
-+ for (i = 0; i < timer_count; i++)
-+ dump_timers_register(mem, mac_version);
-+
-+ if (do_keycache_dump)
-+ keycache_dump(mem, mac_version);
-+
-+ if (keycache_copy_idx > 0)
-+ keycache_copy(mem, mac_version, keycache_copy_idx);
-+
- return 0;
- }