aboutsummaryrefslogtreecommitdiffstats
path: root/package/libertas/src/host.h
diff options
context:
space:
mode:
Diffstat (limited to 'package/libertas/src/host.h')
-rw-r--r--package/libertas/src/host.h286
1 files changed, 286 insertions, 0 deletions
diff --git a/package/libertas/src/host.h b/package/libertas/src/host.h
new file mode 100644
index 0000000000..64178cff2f
--- /dev/null
+++ b/package/libertas/src/host.h
@@ -0,0 +1,286 @@
+/**
+ * This file contains definitions of WLAN commands.
+ */
+
+#ifndef _LBS_HOST_H_
+#define _LBS_HOST_H_
+
+/** PUBLIC DEFINITIONS */
+#define DEFAULT_AD_HOC_CHANNEL 6
+#define DEFAULT_AD_HOC_CHANNEL_A 36
+
+/** IEEE 802.11 oids */
+#define OID_802_11_SSID 0x00008002
+#define OID_802_11_INFRASTRUCTURE_MODE 0x00008008
+#define OID_802_11_FRAGMENTATION_THRESHOLD 0x00008009
+#define OID_802_11_RTS_THRESHOLD 0x0000800A
+#define OID_802_11_TX_ANTENNA_SELECTED 0x0000800D
+#define OID_802_11_SUPPORTED_RATES 0x0000800E
+#define OID_802_11_STATISTICS 0x00008012
+#define OID_802_11_TX_RETRYCOUNT 0x0000801D
+#define OID_802_11D_ENABLE 0x00008020
+
+#define CMD_OPTION_WAITFORRSP 0x0002
+
+/** Host command IDs */
+
+/* Return command are almost always the same as the host command, but with
+ * bit 15 set high. There are a few exceptions, though...
+ */
+#define CMD_RET(cmd) (0x8000 | cmd)
+
+/* Return command convention exceptions: */
+#define CMD_RET_802_11_ASSOCIATE 0x8012
+
+/* Command codes */
+#define CMD_CODE_DNLD 0x0002
+#define CMD_GET_HW_SPEC 0x0003
+#define CMD_EEPROM_UPDATE 0x0004
+#define CMD_802_11_RESET 0x0005
+#define CMD_802_11_SCAN 0x0006
+#define CMD_802_11_GET_LOG 0x000b
+#define CMD_MAC_MULTICAST_ADR 0x0010
+#define CMD_802_11_AUTHENTICATE 0x0011
+#define CMD_802_11_EEPROM_ACCESS 0x0059
+#define CMD_802_11_ASSOCIATE 0x0050
+#define CMD_802_11_SET_WEP 0x0013
+#define CMD_802_11_GET_STAT 0x0014
+#define CMD_802_3_GET_STAT 0x0015
+#define CMD_802_11_SNMP_MIB 0x0016
+#define CMD_MAC_REG_MAP 0x0017
+#define CMD_BBP_REG_MAP 0x0018
+#define CMD_MAC_REG_ACCESS 0x0019
+#define CMD_BBP_REG_ACCESS 0x001a
+#define CMD_RF_REG_ACCESS 0x001b
+#define CMD_802_11_RADIO_CONTROL 0x001c
+#define CMD_802_11_RF_CHANNEL 0x001d
+#define CMD_802_11_RF_TX_POWER 0x001e
+#define CMD_802_11_RSSI 0x001f
+#define CMD_802_11_RF_ANTENNA 0x0020
+#define CMD_802_11_PS_MODE 0x0021
+#define CMD_802_11_DATA_RATE 0x0022
+#define CMD_RF_REG_MAP 0x0023
+#define CMD_802_11_DEAUTHENTICATE 0x0024
+#define CMD_802_11_REASSOCIATE 0x0025
+#define CMD_802_11_DISASSOCIATE 0x0026
+#define CMD_MAC_CONTROL 0x0028
+#define CMD_802_11_AD_HOC_START 0x002b
+#define CMD_802_11_AD_HOC_JOIN 0x002c
+#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e
+#define CMD_802_11_ENABLE_RSN 0x002f
+#define CMD_802_11_PAIRWISE_TSC 0x0036
+#define CMD_802_11_GROUP_TSC 0x0037
+#define CMD_802_11_SET_AFC 0x003c
+#define CMD_802_11_GET_AFC 0x003d
+#define CMD_802_11_AD_HOC_STOP 0x0040
+#define CMD_802_11_BEACON_STOP 0x0049
+#define CMD_802_11_MAC_ADDRESS 0x004d
+#define CMD_802_11_LED_GPIO_CTRL 0x004e
+#define CMD_802_11_EEPROM_ACCESS 0x0059
+#define CMD_802_11_BAND_CONFIG 0x0058
+#define CMD_802_11D_DOMAIN_INFO 0x005b
+#define CMD_802_11_KEY_MATERIAL 0x005e
+#define CMD_802_11_SLEEP_PARAMS 0x0066
+#define CMD_802_11_INACTIVITY_TIMEOUT 0x0067
+#define CMD_802_11_TPC_CFG 0x0072
+#define CMD_802_11_PWR_CFG 0x0073
+#define CMD_802_11_SUBSCRIBE_EVENT 0x0075
+#define CMD_802_11_RATE_ADAPT_RATESET 0x0076
+#define CMD_802_11_TX_RATE_QUERY 0x007f
+#define CMD_GET_TSF 0x0080
+#define CMD_BT_ACCESS 0x0087
+#define CMD_FWT_ACCESS 0x0095
+#define CMD_802_11_MONITOR_MODE 0x0098
+#define CMD_MESH_ACCESS 0x009b
+#define CMD_MESH_CONFIG 0x00a3
+#define CMD_SET_BOOT2_VER 0x00a5
+#define CMD_802_11_BEACON_CTRL 0x00b0
+
+/* For the IEEE Power Save */
+#define CMD_SUBCMD_ENTER_PS 0x0030
+#define CMD_SUBCMD_EXIT_PS 0x0031
+#define CMD_SUBCMD_SLEEP_CONFIRMED 0x0034
+#define CMD_SUBCMD_FULL_POWERDOWN 0x0035
+#define CMD_SUBCMD_FULL_POWERUP 0x0036
+
+#define CMD_ENABLE_RSN 0x0001
+#define CMD_DISABLE_RSN 0x0000
+
+#define CMD_ACT_GET 0x0000
+#define CMD_ACT_SET 0x0001
+#define CMD_ACT_GET_AES 0x0002
+#define CMD_ACT_SET_AES 0x0003
+#define CMD_ACT_REMOVE_AES 0x0004
+
+/* Define action or option for CMD_802_11_SET_WEP */
+#define CMD_ACT_ADD 0x0002
+#define CMD_ACT_REMOVE 0x0004
+#define CMD_ACT_USE_DEFAULT 0x0008
+
+#define CMD_TYPE_WEP_40_BIT 0x01
+#define CMD_TYPE_WEP_104_BIT 0x02
+
+#define CMD_NUM_OF_WEP_KEYS 4
+
+#define CMD_WEP_KEY_INDEX_MASK 0x3fff
+
+/* Define action or option for CMD_802_11_RESET */
+#define CMD_ACT_HALT 0x0003
+
+/* Define action or option for CMD_802_11_SCAN */
+#define CMD_BSS_TYPE_BSS 0x0001
+#define CMD_BSS_TYPE_IBSS 0x0002
+#define CMD_BSS_TYPE_ANY 0x0003
+
+/* Define action or option for CMD_802_11_SCAN */
+#define CMD_SCAN_TYPE_ACTIVE 0x0000
+#define CMD_SCAN_TYPE_PASSIVE 0x0001
+
+#define CMD_SCAN_RADIO_TYPE_BG 0
+
+#define CMD_SCAN_PROBE_DELAY_TIME 0
+
+/* Define action or option for CMD_MAC_CONTROL */
+#define CMD_ACT_MAC_RX_ON 0x0001
+#define CMD_ACT_MAC_TX_ON 0x0002
+#define CMD_ACT_MAC_LOOPBACK_ON 0x0004
+#define CMD_ACT_MAC_WEP_ENABLE 0x0008
+#define CMD_ACT_MAC_INT_ENABLE 0x0010
+#define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020
+#define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040
+#define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080
+#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100
+#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400
+
+/* Define action or option for CMD_802_11_RADIO_CONTROL */
+#define CMD_TYPE_AUTO_PREAMBLE 0x0001
+#define CMD_TYPE_SHORT_PREAMBLE 0x0002
+#define CMD_TYPE_LONG_PREAMBLE 0x0003
+
+/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
+#define CMD_SUBSCRIBE_RSSI_LOW 0x0001
+#define CMD_SUBSCRIBE_SNR_LOW 0x0002
+#define CMD_SUBSCRIBE_FAILCOUNT 0x0004
+#define CMD_SUBSCRIBE_BCNMISS 0x0008
+#define CMD_SUBSCRIBE_RSSI_HIGH 0x0010
+#define CMD_SUBSCRIBE_SNR_HIGH 0x0020
+
+#define TURN_ON_RF 0x01
+#define RADIO_ON 0x01
+#define RADIO_OFF 0x00
+
+#define SET_AUTO_PREAMBLE 0x05
+#define SET_SHORT_PREAMBLE 0x03
+#define SET_LONG_PREAMBLE 0x01
+
+/* Define action or option for CMD_802_11_RF_CHANNEL */
+#define CMD_OPT_802_11_RF_CHANNEL_GET 0x00
+#define CMD_OPT_802_11_RF_CHANNEL_SET 0x01
+
+/* Define action or option for CMD_802_11_RF_TX_POWER */
+#define CMD_ACT_TX_POWER_OPT_GET 0x0000
+#define CMD_ACT_TX_POWER_OPT_SET_HIGH 0x8007
+#define CMD_ACT_TX_POWER_OPT_SET_MID 0x8004
+#define CMD_ACT_TX_POWER_OPT_SET_LOW 0x8000
+
+#define CMD_ACT_TX_POWER_INDEX_HIGH 0x0007
+#define CMD_ACT_TX_POWER_INDEX_MID 0x0004
+#define CMD_ACT_TX_POWER_INDEX_LOW 0x0000
+
+/* Define action or option for CMD_802_11_DATA_RATE */
+#define CMD_ACT_SET_TX_AUTO 0x0000
+#define CMD_ACT_SET_TX_FIX_RATE 0x0001
+#define CMD_ACT_GET_TX_RATE 0x0002
+
+#define CMD_ACT_SET_RX 0x0001
+#define CMD_ACT_SET_TX 0x0002
+#define CMD_ACT_SET_BOTH 0x0003
+#define CMD_ACT_GET_RX 0x0004
+#define CMD_ACT_GET_TX 0x0008
+#define CMD_ACT_GET_BOTH 0x000c
+
+/* Define action or option for CMD_802_11_PS_MODE */
+#define CMD_TYPE_CAM 0x0000
+#define CMD_TYPE_MAX_PSP 0x0001
+#define CMD_TYPE_FAST_PSP 0x0002
+
+/* Define action or option for CMD_BT_ACCESS */
+enum cmd_bt_access_opts {
+ /* The bt commands start at 5 instead of 1 because the old dft commands
+ * are mapped to 1-4. These old commands are no longer maintained and
+ * should not be called.
+ */
+ CMD_ACT_BT_ACCESS_ADD = 5,
+ CMD_ACT_BT_ACCESS_DEL,
+ CMD_ACT_BT_ACCESS_LIST,
+ CMD_ACT_BT_ACCESS_RESET,
+ CMD_ACT_BT_ACCESS_SET_INVERT,
+ CMD_ACT_BT_ACCESS_GET_INVERT
+};
+
+/* Define action or option for CMD_FWT_ACCESS */
+enum cmd_fwt_access_opts {
+ CMD_ACT_FWT_ACCESS_ADD = 1,
+ CMD_ACT_FWT_ACCESS_DEL,
+ CMD_ACT_FWT_ACCESS_LOOKUP,
+ CMD_ACT_FWT_ACCESS_LIST,
+ CMD_ACT_FWT_ACCESS_LIST_ROUTE,
+ CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
+ CMD_ACT_FWT_ACCESS_RESET,
+ CMD_ACT_FWT_ACCESS_CLEANUP,
+ CMD_ACT_FWT_ACCESS_TIME,
+};
+
+/* Define action or option for CMD_MESH_ACCESS */
+enum cmd_mesh_access_opts {
+ CMD_ACT_MESH_GET_TTL = 1,
+ CMD_ACT_MESH_SET_TTL,
+ CMD_ACT_MESH_GET_STATS,
+ CMD_ACT_MESH_GET_ANYCAST,
+ CMD_ACT_MESH_SET_ANYCAST,
+ CMD_ACT_MESH_SET_LINK_COSTS,
+ CMD_ACT_MESH_GET_LINK_COSTS,
+ CMD_ACT_MESH_SET_BCAST_RATE,
+ CMD_ACT_MESH_GET_BCAST_RATE,
+ CMD_ACT_MESH_SET_RREQ_DELAY,
+ CMD_ACT_MESH_GET_RREQ_DELAY,
+ CMD_ACT_MESH_SET_ROUTE_EXP,
+ CMD_ACT_MESH_GET_ROUTE_EXP,
+ CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
+ CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
+};
+
+/** Card Event definition */
+#define MACREG_INT_CODE_TX_PPA_FREE 0
+#define MACREG_INT_CODE_TX_DMA_DONE 1
+#define MACREG_INT_CODE_LINK_LOST_W_SCAN 2
+#define MACREG_INT_CODE_LINK_LOST_NO_SCAN 3
+#define MACREG_INT_CODE_LINK_SENSED 4
+#define MACREG_INT_CODE_CMD_FINISHED 5
+#define MACREG_INT_CODE_MIB_CHANGED 6
+#define MACREG_INT_CODE_INIT_DONE 7
+#define MACREG_INT_CODE_DEAUTHENTICATED 8
+#define MACREG_INT_CODE_DISASSOCIATED 9
+#define MACREG_INT_CODE_PS_AWAKE 10
+#define MACREG_INT_CODE_PS_SLEEP 11
+#define MACREG_INT_CODE_MIC_ERR_MULTICAST 13
+#define MACREG_INT_CODE_MIC_ERR_UNICAST 14
+#define MACREG_INT_CODE_WM_AWAKE 15
+#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE 16
+#define MACREG_INT_CODE_ADHOC_BCN_LOST 17
+#define MACREG_INT_CODE_HOST_AWAKE 18
+#define MACREG_INT_CODE_STOP_TX 19
+#define MACREG_INT_CODE_START_TX 20
+#define MACREG_INT_CODE_CHANNEL_SWITCH 21
+#define MACREG_INT_CODE_MEASUREMENT_RDY 22
+#define MACREG_INT_CODE_WMM_CHANGE 23
+#define MACREG_INT_CODE_BG_SCAN_REPORT 24
+#define MACREG_INT_CODE_RSSI_LOW 25
+#define MACREG_INT_CODE_SNR_LOW 26
+#define MACREG_INT_CODE_MAX_FAIL 27
+#define MACREG_INT_CODE_RSSI_HIGH 28
+#define MACREG_INT_CODE_SNR_HIGH 29
+#define MACREG_INT_CODE_MESH_AUTO_STARTED 35
+#define MACREG_INT_CODE_FIRMWARE_READY 48
+
+#endif