aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel
diff options
context:
space:
mode:
Diffstat (limited to 'package/kernel')
-rw-r--r--package/kernel/mac80211/patches/972-ath10k_fix-crash-due-to-wrong-handling-of-peer_bw_rxnss_override-parameter.patch132
-rw-r--r--package/kernel/mac80211/patches/973-ath10k_fix-band_center_freq-handling-for-VHT160-in-recent-firmwares.patch50
2 files changed, 182 insertions, 0 deletions
diff --git a/package/kernel/mac80211/patches/972-ath10k_fix-crash-due-to-wrong-handling-of-peer_bw_rxnss_override-parameter.patch b/package/kernel/mac80211/patches/972-ath10k_fix-crash-due-to-wrong-handling-of-peer_bw_rxnss_override-parameter.patch
new file mode 100644
index 0000000000..9dceea8f41
--- /dev/null
+++ b/package/kernel/mac80211/patches/972-ath10k_fix-crash-due-to-wrong-handling-of-peer_bw_rxnss_override-parameter.patch
@@ -0,0 +1,132 @@
+From: Sebastian Gottschall <s.gottsch...@dd-wrt.com>
+
+current handling of peer_bw_rxnss_override parameter is based on guessing the
+VHT160/8080 capability by rx rate. this is wrong and may lead
+to a non initialized peer_bw_rxnss_override parameter which is required since
+VHT160 operation mode only supports 2x2 chainmasks in addition the original code
+initialized the parameter with wrong masked values.
+This patch uses the peer phymode and peer nss information for correct
+initialisation of the peer_bw_rxnss_override parameter.
+if this peer information is not available, we initialize the parameter by
+minimum nss which is suggested by QCA as temporary workaround according
+to the QCA sourcecodes.
+
+Signed-off-by: Sebastian Gottschall <s.gottsch...@dd-wrt.com>
+
+v2: remove debug messages
+v3: apply some cosmetics, update documentation
+v4: fix compile warning and truncate nss to maximum of 2x2 since current
+chipsets only support 2x2 at vht160
+v5: handle maximum nss for chipsets supportig vht160 with 1x1 only
+v7: use more simple code variant and take care about hw/sw chainmask
+configuration
+---
+ drivers/net/wireless/ath/ath10k/mac.c | 40 +++++++++++++++------------
+ drivers/net/wireless/ath/ath10k/wmi.c | 7 +----
+ drivers/net/wireless/ath/ath10k/wmi.h | 14 +++++++++-
+ 3 files changed, 36 insertions(+), 25 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath10k/mac.c
++++ b/drivers/net/wireless/ath/ath10k/mac.c
+@@ -2466,7 +2466,7 @@ static void ath10k_peer_assoc_h_vht(stru
+ const u16 *vht_mcs_mask;
+ u8 ampdu_factor;
+ u8 max_nss, vht_mcs;
+- int i;
++ int i, nss160;
+
+ if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
+ return;
+@@ -2526,23 +2526,27 @@ static void ath10k_peer_assoc_h_vht(stru
+ __le16_to_cpu(vht_cap->vht_mcs.tx_highest);
+ arg->peer_vht_rates.tx_mcs_set = ath10k_peer_assoc_h_vht_limit(
+ __le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map), vht_mcs_mask);
++ arg->peer_bw_rxnss_override = 0;
++ nss160 = 1; /* 1x1 default config for VHT160 */
+
+- ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x\n",
+- sta->addr, arg->peer_max_mpdu, arg->peer_flags);
+-
+- if (arg->peer_vht_rates.rx_max_rate &&
+- (sta->vht_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK)) {
+- switch (arg->peer_vht_rates.rx_max_rate) {
+- case 1560:
+- /* Must be 2x2 at 160Mhz is all it can do. */
+- arg->peer_bw_rxnss_override = 2;
+- break;
+- case 780:
+- /* Can only do 1x1 at 160Mhz (Long Guard Interval) */
+- arg->peer_bw_rxnss_override = 1;
+- break;
+- }
++ /* only 4x4 configuration do support 2x2 for VHT160, everything else must use 1x1 */
++ if (ar->cfg_rx_chainmask == 15)
++ nss160 = arg->peer_num_spatial_streams <= 2 ? arg->peer_num_spatial_streams : 2;
++
++ /* in case if peer is connected with vht160 or vht80+80, we need to properly adjust rxnss parameters otherwise firmware will raise a assert */
++ switch(arg->peer_phymode) {
++ case MODE_11AC_VHT80_80:
++ arg->peer_bw_rxnss_override = BW_NSS_FWCONF_80_80(nss160);
++ /* fall through */
++ case MODE_11AC_VHT160:
++ arg->peer_bw_rxnss_override |= BW_NSS_FWCONF_160(nss160);
++ break;
++ default:
++ break;
+ }
++
++ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x peer_bw_rxnss_override 0x%x\n",
++ sta->addr, arg->peer_max_mpdu, arg->peer_flags, arg->peer_bw_rxnss_override);
+ }
+
+ static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
+@@ -2694,9 +2698,9 @@ static int ath10k_peer_assoc_prepare(str
+ ath10k_peer_assoc_h_crypto(ar, vif, sta, arg);
+ ath10k_peer_assoc_h_rates(ar, vif, sta, arg);
+ ath10k_peer_assoc_h_ht(ar, vif, sta, arg);
++ ath10k_peer_assoc_h_phymode(ar, vif, sta, arg);
+ ath10k_peer_assoc_h_vht(ar, vif, sta, arg);
+ ath10k_peer_assoc_h_qos(ar, vif, sta, arg);
+- ath10k_peer_assoc_h_phymode(ar, vif, sta, arg);
+
+ return 0;
+ }
+--- a/drivers/net/wireless/ath/ath10k/wmi.c
++++ b/drivers/net/wireless/ath/ath10k/wmi.c
+@@ -6760,12 +6760,7 @@ ath10k_wmi_peer_assoc_fill_10_4(struct a
+ struct wmi_10_4_peer_assoc_complete_cmd *cmd = buf;
+
+ ath10k_wmi_peer_assoc_fill_10_2(ar, buf, arg);
+- if (arg->peer_bw_rxnss_override)
+- cmd->peer_bw_rxnss_override =
+- __cpu_to_le32((arg->peer_bw_rxnss_override - 1) |
+- BIT(PEER_BW_RXNSS_OVERRIDE_OFFSET));
+- else
+- cmd->peer_bw_rxnss_override = 0;
++ cmd->peer_bw_rxnss_override = __cpu_to_le32(arg->peer_bw_rxnss_override);
+ }
+
+ static int
+--- a/drivers/net/wireless/ath/ath10k/wmi.h
++++ b/drivers/net/wireless/ath/ath10k/wmi.h
+@@ -6209,7 +6209,19 @@ struct wmi_10_2_peer_assoc_complete_cmd
+ __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
+ } __packed;
+
+-#define PEER_BW_RXNSS_OVERRIDE_OFFSET 31
++#define BW_NSS_FWCONF_MAP_ENABLE (1 << 31)
++#define BW_NSS_FWCONF_MAP_160MHZ_S (0)
++#define BW_NSS_FWCONF_MAP_160MHZ_M (0x00000007)
++#define BW_NSS_FWCONF_MAP_80_80MHZ_S (3)
++#define BW_NSS_FWCONF_MAP_80_80MHZ_M (0x00000038)
++#define BW_NSS_FWCONF_MAP_M (0x0000003F)
++
++#define GET_BW_NSS_FWCONF_160(x) ((((x) & BW_NSS_FWCONF_MAP_160MHZ_M) >> BW_NSS_FWCONF_MAP_160MHZ_S) + 1)
++#define GET_BW_NSS_FWCONF_80_80(x) ((((x) & BW_NSS_FWCONF_MAP_80_80MHZ_M) >> BW_NSS_FWCONF_MAP_80_80MHZ_S) + 1)
++
++/* Values defined to set 160 MHz Bandwidth NSS Mapping into FW*/
++#define BW_NSS_FWCONF_160(x) (BW_NSS_FWCONF_MAP_ENABLE | (((x - 1) << BW_NSS_FWCONF_MAP_160MHZ_S) & BW_NSS_FWCONF_MAP_160MHZ_M))
++#define BW_NSS_FWCONF_80_80(x) (BW_NSS_FWCONF_MAP_ENABLE | (((x - 1) << BW_NSS_FWCONF_MAP_80_80MHZ_S) & BW_NSS_FWCONF_MAP_80_80MHZ_M))
+
+ struct wmi_10_4_peer_assoc_complete_cmd {
+ struct wmi_10_2_peer_assoc_complete_cmd cmd;
diff --git a/package/kernel/mac80211/patches/973-ath10k_fix-band_center_freq-handling-for-VHT160-in-recent-firmwares.patch b/package/kernel/mac80211/patches/973-ath10k_fix-band_center_freq-handling-for-VHT160-in-recent-firmwares.patch
new file mode 100644
index 0000000000..c8f79b815a
--- /dev/null
+++ b/package/kernel/mac80211/patches/973-ath10k_fix-band_center_freq-handling-for-VHT160-in-recent-firmwares.patch
@@ -0,0 +1,50 @@
+From: Sebastian Gottschall <s.gottschall@dd-wrt.com>
+
+starting with firmware 10.4.3.4.x series QCA changed the handling of the channel property band_center_freq1 and band_center_freq2 in vht160 operation mode
+likelly for backward compatiblity with vht80 only capable clients.
+this patch adjusts the handling to get vht160 to work again with official qca firmwares newer than 3.3
+consider that this patch will not work with older firmwares anymore. to avoid undefined behaviour this we disable vht160 capability for outdated firmwares
+---
+ drivers/net/wireless/ath/ath10k/mac.c | 7 -------
+ drivers/net/wireless/ath/ath10k/wmi.c | 11 ++++++++---
+ 2 files changed, 8 insertions(+), 10 deletions(-)
+--- a/drivers/net/wireless/ath/ath10k/mac.c
++++ b/drivers/net/wireless/ath/ath10k/mac.c
+@@ -4416,13 +4416,6 @@ static struct ieee80211_sta_vht_cap ath1
+ vht_cap.cap |= val;
+ }
+
+- /* Currently the firmware seems to be buggy, don't enable 80+80
+- * mode until that's resolved.
+- */
+- if ((ar->vht_cap_info & IEEE80211_VHT_CAP_SHORT_GI_160) &&
+- (ar->vht_cap_info & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) == 0)
+- vht_cap.cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
+-
+ mcs_map = 0;
+ for (i = 0; i < 8; i++) {
+ if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i)))
+--- a/drivers/net/wireless/ath/ath10k/wmi.c
++++ b/drivers/net/wireless/ath/ath10k/wmi.c
+@@ -1660,13 +1660,18 @@ void ath10k_wmi_put_wmi_channel(struct w
+ flags |= WMI_CHAN_FLAG_HT40_PLUS;
+ if (arg->chan_radar)
+ flags |= WMI_CHAN_FLAG_DFS;
+-
++ ch->band_center_freq2 = 0;
+ ch->mhz = __cpu_to_le32(arg->freq);
+ ch->band_center_freq1 = __cpu_to_le32(arg->band_center_freq1);
+ if (arg->mode == MODE_11AC_VHT80_80)
+ ch->band_center_freq2 = __cpu_to_le32(arg->band_center_freq2);
+- else
+- ch->band_center_freq2 = 0;
++ if (arg->mode == MODE_11AC_VHT160) {
++ if (arg->freq < arg->band_center_freq1)
++ ch->band_center_freq1 = __cpu_to_le32(arg->band_center_freq1 - 40);
++ else
++ ch->band_center_freq1 = __cpu_to_le32(arg->band_center_freq1 + 40);
++ ch->band_center_freq2 = __cpu_to_le32(arg->band_center_freq1);
++ }
+ ch->min_power = arg->min_power;
+ ch->max_power = arg->max_power;
+ ch->reg_power = arg->max_reg_power;