aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel/mac80211/patches/rt2x00
diff options
context:
space:
mode:
Diffstat (limited to 'package/kernel/mac80211/patches/rt2x00')
-rw-r--r--package/kernel/mac80211/patches/rt2x00/050-rt2x00-add-RT3883-support.patch959
-rw-r--r--package/kernel/mac80211/patches/rt2x00/502-rt2x00-rt2800lib-enable-support-for-RT3883.patch20
-rw-r--r--package/kernel/mac80211/patches/rt2x00/503-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch112
-rw-r--r--package/kernel/mac80211/patches/rt2x00/504-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch28
-rw-r--r--package/kernel/mac80211/patches/rt2x00/505-rt2x00-rt2800lib-add-channel-configuration-function-.patch235
-rw-r--r--package/kernel/mac80211/patches/rt2x00/506-rt2x00-rt2800lib-enable-RF3853-support.patch20
-rw-r--r--package/kernel/mac80211/patches/rt2x00/507-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch62
-rw-r--r--package/kernel/mac80211/patches/rt2x00/508-rt2x00-rt2800soc-fix-rt2800soc_disable_radio-for-RT3.patch30
-rw-r--r--package/kernel/mac80211/patches/rt2x00/509-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch71
-rw-r--r--package/kernel/mac80211/patches/rt2x00/510-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch178
-rw-r--r--package/kernel/mac80211/patches/rt2x00/511-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch22
-rw-r--r--package/kernel/mac80211/patches/rt2x00/512-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch21
-rw-r--r--package/kernel/mac80211/patches/rt2x00/513-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch136
-rw-r--r--package/kernel/mac80211/patches/rt2x00/514-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch30
-rw-r--r--package/kernel/mac80211/patches/rt2x00/515-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch23
-rw-r--r--package/kernel/mac80211/patches/rt2x00/516-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch33
-rw-r--r--package/kernel/mac80211/patches/rt2x00/517-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch20
-rw-r--r--package/kernel/mac80211/patches/rt2x00/518-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch22
-rw-r--r--package/kernel/mac80211/patches/rt2x00/519-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch32
-rw-r--r--package/kernel/mac80211/patches/rt2x00/520-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch44
-rw-r--r--package/kernel/mac80211/patches/rt2x00/521-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch42
-rw-r--r--package/kernel/mac80211/patches/rt2x00/522-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch22
22 files changed, 959 insertions, 1203 deletions
diff --git a/package/kernel/mac80211/patches/rt2x00/050-rt2x00-add-RT3883-support.patch b/package/kernel/mac80211/patches/rt2x00/050-rt2x00-add-RT3883-support.patch
new file mode 100644
index 0000000000..162a20155d
--- /dev/null
+++ b/package/kernel/mac80211/patches/rt2x00/050-rt2x00-add-RT3883-support.patch
@@ -0,0 +1,959 @@
+From d0e61a0f7cca51ce340a5a73595189972122ff25 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 24 Apr 2019 09:49:24 +0200
+Subject: [PATCH] rt2x00: add RT3883 support
+
+Patch add support for RT3883 chip. Code was taken direclty
+from openwrt project and merge into one patch.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800.h | 19 +-
+ .../net/wireless/ralink/rt2x00/rt2800lib.c | 598 +++++++++++++++++-
+ .../net/wireless/ralink/rt2x00/rt2800soc.c | 9 +-
+ 3 files changed, 607 insertions(+), 19 deletions(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
+@@ -48,7 +48,8 @@
+ * RF2853 2.4G/5G 3T3R
+ * RF3320 2.4G 1T1R(RT3350/RT3370/RT3390)
+ * RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392)
+- * RF3053 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662)
++ * RF3053 2.4G/5G 3T3R(RT3563/RT3573/RT3593)
++ * RF3853 2.4G/5G 3T3R(RT3883/RT3662)
+ * RF5592 2.4G/5G 2T2R
+ * RF3070 2.4G 1T1R
+ * RF5360 2.4G 1T1R
+@@ -72,6 +73,7 @@
+ #define RF5592 0x000f
+ #define RF3070 0x3070
+ #define RF3290 0x3290
++#define RF3853 0x3853
+ #define RF5350 0x5350
+ #define RF5360 0x5360
+ #define RF5362 0x5362
+@@ -1726,6 +1728,20 @@
+ #define TX_PWR_CFG_9B_STBC_MCS7 FIELD32(0x000000ff)
+
+ /*
++ * TX_TXBF_CFG:
++ */
++#define TX_TXBF_CFG_0 0x138c
++#define TX_TXBF_CFG_1 0x13a4
++#define TX_TXBF_CFG_2 0x13a8
++#define TX_TXBF_CFG_3 0x13ac
++
++/*
++ * TX_FBK_CFG_3S:
++ */
++#define TX_FBK_CFG_3S_0 0x13c4
++#define TX_FBK_CFG_3S_1 0x13c8
++
++/*
+ * RX_FILTER_CFG: RX configuration register.
+ */
+ #define RX_FILTER_CFG 0x1400
+@@ -2296,6 +2312,7 @@ struct mac_iveiv_entry {
+ /*
+ * RFCSR 2:
+ */
++#define RFCSR2_RESCAL_BP FIELD8(0x40)
+ #define RFCSR2_RESCAL_EN FIELD8(0x80)
+ #define RFCSR2_RX2_EN_MT7620 FIELD8(0x02)
+ #define RFCSR2_TX2_EN_MT7620 FIELD8(0x20)
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -381,7 +381,8 @@ static unsigned int rt2800_eeprom_word_i
+ wiphy_name(rt2x00dev->hw->wiphy), word))
+ return 0;
+
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ map = rt2800_eeprom_map_ext;
+ else
+ map = rt2800_eeprom_map;
+@@ -590,6 +591,7 @@ void rt2800_get_txwi_rxwi_size(struct rt
+ {
+ switch (rt2x00dev->chip.rt) {
+ case RT3593:
++ case RT3883:
+ *txwi_size = TXWI_DESC_SIZE_4WORDS;
+ *rxwi_size = RXWI_DESC_SIZE_5WORDS;
+ break;
+@@ -2180,7 +2182,8 @@ void rt2800_config_ant(struct rt2x00_dev
+ rt2800_bbp_write(rt2x00dev, 3, r3);
+ rt2800_bbp_write(rt2x00dev, 1, r1);
+
+- if (rt2x00_rt(rt2x00dev, RT3593)) {
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883)) {
+ if (ant->rx_chain_num == 1)
+ rt2800_bbp_write(rt2x00dev, 86, 0x00);
+ else
+@@ -2202,7 +2205,8 @@ static void rt2800_config_lna_gain(struc
+ eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_LNA);
+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
+ } else if (libconf->rf.channel <= 128) {
+- if (rt2x00_rt(rt2x00dev, RT3593)) {
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883)) {
+ eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2);
+ lna_gain = rt2x00_get_field16(eeprom,
+ EEPROM_EXT_LNA2_A1);
+@@ -2212,7 +2216,8 @@ static void rt2800_config_lna_gain(struc
+ EEPROM_RSSI_BG2_LNA_A1);
+ }
+ } else {
+- if (rt2x00_rt(rt2x00dev, RT3593)) {
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883)) {
+ eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2);
+ lna_gain = rt2x00_get_field16(eeprom,
+ EEPROM_EXT_LNA2_A2);
+@@ -2880,6 +2885,211 @@ static void rt2800_config_channel_rf3053
+ }
+ }
+
++static void rt2800_config_channel_rf3853(struct rt2x00_dev *rt2x00dev,
++ struct ieee80211_conf *conf,
++ struct rf_channel *rf,
++ struct channel_info *info)
++{
++ u8 rfcsr;
++ u8 bbp;
++ u8 pwr1, pwr2, pwr3;
++
++ const bool txbf_enabled = false; /* TODO */
++
++ /* TODO: add band selection */
++
++ if (rf->channel <= 14)
++ rt2800_rfcsr_write(rt2x00dev, 6, 0x40);
++ else if (rf->channel < 132)
++ rt2800_rfcsr_write(rt2x00dev, 6, 0x80);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 6, 0x40);
++
++ rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
++ rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
++
++ if (rf->channel <= 14)
++ rt2800_rfcsr_write(rt2x00dev, 11, 0x46);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 11, 0x48);
++
++ if (rf->channel <= 14)
++ rt2800_rfcsr_write(rt2x00dev, 12, 0x1a);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 12, 0x52);
++
++ rt2800_rfcsr_write(rt2x00dev, 13, 0x12);
++
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
++ rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
++ rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
++ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
++ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
++ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
++ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
++ rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
++ rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
++
++ switch (rt2x00dev->default_ant.tx_chain_num) {
++ case 3:
++ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
++ /* fallthrough */
++ case 2:
++ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
++ /* fallthrough */
++ case 1:
++ rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
++ break;
++ }
++
++ switch (rt2x00dev->default_ant.rx_chain_num) {
++ case 3:
++ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
++ /* fallthrough */
++ case 2:
++ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
++ /* fallthrough */
++ case 1:
++ rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
++ break;
++ }
++ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
++
++ rt2800_freq_cal_mode1(rt2x00dev);
++
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 30);
++ if (!conf_is_ht40(conf))
++ rfcsr &= ~(0x06);
++ else
++ rfcsr |= 0x06;
++ rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
++
++ if (rf->channel <= 14)
++ rt2800_rfcsr_write(rt2x00dev, 31, 0xa0);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
++
++ if (conf_is_ht40(conf))
++ rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 32, 0xd8);
++
++ if (rf->channel <= 14)
++ rt2800_rfcsr_write(rt2x00dev, 34, 0x3c);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 34, 0x20);
++
++ /* loopback RF_BS */
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 36);
++ if (rf->channel <= 14)
++ rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 1);
++ else
++ rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 0);
++ rt2800_rfcsr_write(rt2x00dev, 36, rfcsr);
++
++ if (rf->channel <= 14)
++ rfcsr = 0x23;
++ else if (rf->channel < 100)
++ rfcsr = 0x36;
++ else if (rf->channel < 132)
++ rfcsr = 0x32;
++ else
++ rfcsr = 0x30;
++
++ if (txbf_enabled)
++ rfcsr |= 0x40;
++
++ rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
++
++ if (rf->channel <= 14)
++ rt2800_rfcsr_write(rt2x00dev, 44, 0x93);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 44, 0x9b);
++
++ if (rf->channel <= 14)
++ rfcsr = 0xbb;
++ else if (rf->channel < 100)
++ rfcsr = 0xeb;
++ else if (rf->channel < 132)
++ rfcsr = 0xb3;
++ else
++ rfcsr = 0x9b;
++ rt2800_rfcsr_write(rt2x00dev, 45, rfcsr);
++
++ if (rf->channel <= 14)
++ rfcsr = 0x8e;
++ else
++ rfcsr = 0x8a;
++
++ if (txbf_enabled)
++ rfcsr |= 0x20;
++
++ rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
++
++ rt2800_rfcsr_write(rt2x00dev, 50, 0x86);
++
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 51);
++ if (rf->channel <= 14)
++ rt2800_rfcsr_write(rt2x00dev, 51, 0x75);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 51, 0x51);
++
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 52);
++ if (rf->channel <= 14)
++ rt2800_rfcsr_write(rt2x00dev, 52, 0x45);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 52, 0x05);
++
++ if (rf->channel <= 14) {
++ pwr1 = info->default_power1 & 0x1f;
++ pwr2 = info->default_power2 & 0x1f;
++ pwr3 = info->default_power3 & 0x1f;
++ } else {
++ pwr1 = 0x48 | ((info->default_power1 & 0x18) << 1) |
++ (info->default_power1 & 0x7);
++ pwr2 = 0x48 | ((info->default_power2 & 0x18) << 1) |
++ (info->default_power2 & 0x7);
++ pwr3 = 0x48 | ((info->default_power3 & 0x18) << 1) |
++ (info->default_power3 & 0x7);
++ }
++
++ rt2800_rfcsr_write(rt2x00dev, 53, pwr1);
++ rt2800_rfcsr_write(rt2x00dev, 54, pwr2);
++ rt2800_rfcsr_write(rt2x00dev, 55, pwr3);
++
++ rt2x00_dbg(rt2x00dev, "Channel:%d, pwr1:%02x, pwr2:%02x, pwr3:%02x\n",
++ rf->channel, pwr1, pwr2, pwr3);
++
++ bbp = (info->default_power1 >> 5) |
++ ((info->default_power2 & 0xe0) >> 1);
++ rt2800_bbp_write(rt2x00dev, 109, bbp);
++
++ bbp = rt2800_bbp_read(rt2x00dev, 110);
++ bbp &= 0x0f;
++ bbp |= (info->default_power3 & 0xe0) >> 1;
++ rt2800_bbp_write(rt2x00dev, 110, bbp);
++
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 57);
++ if (rf->channel <= 14)
++ rt2800_rfcsr_write(rt2x00dev, 57, 0x6e);
++ else
++ rt2800_rfcsr_write(rt2x00dev, 57, 0x3e);
++
++ /* Enable RF tuning */
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 3);
++ rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
++ rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
++
++ udelay(2000);
++
++ bbp = rt2800_bbp_read(rt2x00dev, 49);
++ /* clear update flag */
++ rt2800_bbp_write(rt2x00dev, 49, bbp & 0xfe);
++ rt2800_bbp_write(rt2x00dev, 49, bbp);
++
++ /* TODO: add calibration for TxBF */
++}
++
+ #define POWER_BOUND 0x27
+ #define POWER_BOUND_5G 0x2b
+
+@@ -3683,19 +3893,51 @@ static char rt2800_txpower_to_dev(struct
+ unsigned int channel,
+ char txpower)
+ {
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ txpower = rt2x00_get_field8(txpower, EEPROM_TXPOWER_ALC);
+
+ if (channel <= 14)
+ return clamp_t(char, txpower, MIN_G_TXPOWER, MAX_G_TXPOWER);
+
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ return clamp_t(char, txpower, MIN_A_TXPOWER_3593,
+ MAX_A_TXPOWER_3593);
+ else
+ return clamp_t(char, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER);
+ }
+
++static void rt3883_bbp_adjust(struct rt2x00_dev *rt2x00dev,
++ struct rf_channel *rf)
++{
++ u8 bbp;
++
++ bbp = (rf->channel > 14) ? 0x48 : 0x38;
++ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, bbp);
++
++ rt2800_bbp_write(rt2x00dev, 69, 0x12);
++
++ if (rf->channel <= 14) {
++ rt2800_bbp_write(rt2x00dev, 70, 0x0a);
++ } else {
++ /* Disable CCK packet detection */
++ rt2800_bbp_write(rt2x00dev, 70, 0x00);
++ }
++
++ rt2800_bbp_write(rt2x00dev, 73, 0x10);
++
++ if (rf->channel > 14) {
++ rt2800_bbp_write(rt2x00dev, 62, 0x1d);
++ rt2800_bbp_write(rt2x00dev, 63, 0x1d);
++ rt2800_bbp_write(rt2x00dev, 64, 0x1d);
++ } else {
++ rt2800_bbp_write(rt2x00dev, 62, 0x2d);
++ rt2800_bbp_write(rt2x00dev, 63, 0x2d);
++ rt2800_bbp_write(rt2x00dev, 64, 0x2d);
++ }
++}
++
+ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf,
+ struct rf_channel *rf,
+@@ -3714,6 +3956,12 @@ static void rt2800_config_channel(struct
+ rt2800_txpower_to_dev(rt2x00dev, rf->channel,
+ info->default_power3);
+
++ switch (rt2x00dev->chip.rt) {
++ case RT3883:
++ rt3883_bbp_adjust(rt2x00dev, rf);
++ break;
++ }
++
+ switch (rt2x00dev->chip.rf) {
+ case RF2020:
+ case RF3020:
+@@ -3734,6 +3982,9 @@ static void rt2800_config_channel(struct
+ case RF3322:
+ rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info);
+ break;
++ case RF3853:
++ rt2800_config_channel_rf3853(rt2x00dev, conf, rf, info);
++ break;
+ case RF3070:
+ case RF5350:
+ case RF5360:
+@@ -3815,6 +4066,15 @@ static void rt2800_config_channel(struct
+ rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
+ rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
+ rt2800_bbp_write(rt2x00dev, 77, 0x98);
++ } else if (rt2x00_rt(rt2x00dev, RT3883)) {
++ rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
++ rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
++ rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
++
++ if (rt2x00dev->default_ant.rx_chain_num > 1)
++ rt2800_bbp_write(rt2x00dev, 86, 0x46);
++ else
++ rt2800_bbp_write(rt2x00dev, 86, 0);
+ } else {
+ rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
+ rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
+@@ -3828,6 +4088,7 @@ static void rt2800_config_channel(struct
+ !rt2x00_rt(rt2x00dev, RT6352)) {
+ if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
+ rt2800_bbp_write(rt2x00dev, 82, 0x62);
++ rt2800_bbp_write(rt2x00dev, 82, 0x62);
+ rt2800_bbp_write(rt2x00dev, 75, 0x46);
+ } else {
+ if (rt2x00_rt(rt2x00dev, RT3593))
+@@ -3836,19 +4097,22 @@ static void rt2800_config_channel(struct
+ rt2800_bbp_write(rt2x00dev, 82, 0x84);
+ rt2800_bbp_write(rt2x00dev, 75, 0x50);
+ }
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ rt2800_bbp_write(rt2x00dev, 83, 0x8a);
+ }
+
+ } else {
+ if (rt2x00_rt(rt2x00dev, RT3572))
+ rt2800_bbp_write(rt2x00dev, 82, 0x94);
+- else if (rt2x00_rt(rt2x00dev, RT3593))
++ else if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ rt2800_bbp_write(rt2x00dev, 82, 0x82);
+ else if (!rt2x00_rt(rt2x00dev, RT6352))
+ rt2800_bbp_write(rt2x00dev, 82, 0xf2);
+
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ rt2800_bbp_write(rt2x00dev, 83, 0x9a);
+
+ if (rt2x00_has_cap_external_lna_a(rt2x00dev))
+@@ -3984,6 +4248,23 @@ static void rt2800_config_channel(struct
+ usleep_range(1000, 1500);
+ }
+
++ if (rt2x00_rt(rt2x00dev, RT3883)) {
++ if (!conf_is_ht40(conf))
++ rt2800_bbp_write(rt2x00dev, 105, 0x34);
++ else
++ rt2800_bbp_write(rt2x00dev, 105, 0x04);
++
++ /* AGC init */
++ if (rf->channel <= 14)
++ reg = 0x2e + rt2x00dev->lna_gain;
++ else
++ reg = 0x20 + ((rt2x00dev->lna_gain * 5) / 3);
++
++ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
++
++ usleep_range(1000, 1500);
++ }
++
+ if (rt2x00_rt(rt2x00dev, RT5592) || rt2x00_rt(rt2x00dev, RT6352)) {
+ reg = 0x10;
+ if (!conf_is_ht40(conf)) {
+@@ -4243,6 +4524,9 @@ static u8 rt2800_compensate_txpower(stru
+ if (rt2x00_rt(rt2x00dev, RT3593))
+ return min_t(u8, txpower, 0xc);
+
++ if (rt2x00_rt(rt2x00dev, RT3883))
++ return min_t(u8, txpower, 0xf);
++
+ if (rt2x00_has_cap_power_limit(rt2x00dev)) {
+ /*
+ * Check if eirp txpower exceed txpower_limit.
+@@ -5004,7 +5288,8 @@ static void rt2800_config_txpower(struct
+ struct ieee80211_channel *chan,
+ int power_level)
+ {
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ rt2800_config_txpower_rt3593(rt2x00dev, chan, power_level);
+ else if (rt2x00_rt(rt2x00dev, RT6352))
+ rt2800_config_txpower_rt6352(rt2x00dev, chan, power_level);
+@@ -5051,6 +5336,7 @@ void rt2800_vco_calibration(struct rt2x0
+ case RF3053:
+ case RF3070:
+ case RF3290:
++ case RF3853:
+ case RF5350:
+ case RF5360:
+ case RF5362:
+@@ -5251,7 +5537,8 @@ static u8 rt2800_get_default_vgc(struct
+ else
+ vgc = 0x2e + rt2x00dev->lna_gain;
+ } else { /* 5GHZ band */
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3;
+ else if (rt2x00_rt(rt2x00dev, RT5592))
+ vgc = 0x24 + (2 * rt2x00dev->lna_gain);
+@@ -5271,7 +5558,8 @@ static inline void rt2800_set_vgc(struct
+ {
+ if (qual->vgc_level != vgc_level) {
+ if (rt2x00_rt(rt2x00dev, RT3572) ||
+- rt2x00_rt(rt2x00dev, RT3593)) {
++ rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883)) {
+ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66,
+ vgc_level);
+ } else if (rt2x00_rt(rt2x00dev, RT5592)) {
+@@ -5318,6 +5606,11 @@ void rt2800_link_tuner(struct rt2x00_dev
+ }
+ break;
+
++ case RT3883:
++ if (qual->rssi > -65)
++ vgc += 0x10;
++ break;
++
+ case RT5592:
+ if (qual->rssi > -65)
+ vgc += 0x20;
+@@ -5470,6 +5763,12 @@ static int rt2800_init_registers(struct
+ rt2800_register_write(rt2x00dev, TX_SW_CFG2,
+ 0x00000000);
+ }
++ } else if (rt2x00_rt(rt2x00dev, RT3883)) {
++ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402);
++ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
++ rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00040000);
++ rt2800_register_write(rt2x00dev, TX_TXBF_CFG_0, 0x8000fc21);
++ rt2800_register_write(rt2x00dev, TX_TXBF_CFG_3, 0x00009c40);
+ } else if (rt2x00_rt(rt2x00dev, RT5390) ||
+ rt2x00_rt(rt2x00dev, RT5392) ||
+ rt2x00_rt(rt2x00dev, RT6352)) {
+@@ -5683,6 +5982,11 @@ static int rt2800_init_registers(struct
+ reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002;
+ rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, reg);
+
++ if (rt2x00_rt(rt2x00dev, RT3883)) {
++ rt2800_register_write(rt2x00dev, TX_FBK_CFG_3S_0, 0x12111008);
++ rt2800_register_write(rt2x00dev, TX_FBK_CFG_3S_1, 0x16151413);
++ }
++
+ reg = rt2800_register_read(rt2x00dev, TX_RTS_CFG);
+ rt2x00_set_field32(&reg, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 7);
+ rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES,
+@@ -6299,6 +6603,47 @@ static void rt2800_init_bbp_3593(struct
+ rt2800_bbp_write(rt2x00dev, 103, 0xc0);
+ }
+
++static void rt2800_init_bbp_3883(struct rt2x00_dev *rt2x00dev)
++{
++ rt2800_init_bbp_early(rt2x00dev);
++
++ rt2800_bbp_write(rt2x00dev, 4, 0x50);
++ rt2800_bbp_write(rt2x00dev, 47, 0x48);
++
++ rt2800_bbp_write(rt2x00dev, 86, 0x46);
++ rt2800_bbp_write(rt2x00dev, 88, 0x90);
++
++ rt2800_bbp_write(rt2x00dev, 92, 0x02);
++
++ rt2800_bbp_write(rt2x00dev, 103, 0xc0);
++ rt2800_bbp_write(rt2x00dev, 104, 0x92);
++ rt2800_bbp_write(rt2x00dev, 105, 0x34);
++ rt2800_bbp_write(rt2x00dev, 106, 0x12);
++ rt2800_bbp_write(rt2x00dev, 120, 0x50);
++ rt2800_bbp_write(rt2x00dev, 137, 0x0f);
++ rt2800_bbp_write(rt2x00dev, 163, 0x9d);
++
++ /* Set ITxBF timeout to 0x9C40=1000msec */
++ rt2800_bbp_write(rt2x00dev, 179, 0x02);
++ rt2800_bbp_write(rt2x00dev, 180, 0x00);
++ rt2800_bbp_write(rt2x00dev, 182, 0x40);
++ rt2800_bbp_write(rt2x00dev, 180, 0x01);
++ rt2800_bbp_write(rt2x00dev, 182, 0x9c);
++
++ rt2800_bbp_write(rt2x00dev, 179, 0x00);
++
++ /* Reprogram the inband interface to put right values in RXWI */
++ rt2800_bbp_write(rt2x00dev, 142, 0x04);
++ rt2800_bbp_write(rt2x00dev, 143, 0x3b);
++ rt2800_bbp_write(rt2x00dev, 142, 0x06);
++ rt2800_bbp_write(rt2x00dev, 143, 0xa0);
++ rt2800_bbp_write(rt2x00dev, 142, 0x07);
++ rt2800_bbp_write(rt2x00dev, 143, 0xa1);
++ rt2800_bbp_write(rt2x00dev, 142, 0x08);
++ rt2800_bbp_write(rt2x00dev, 143, 0xa2);
++ rt2800_bbp_write(rt2x00dev, 148, 0xc8);
++}
++
+ static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev)
+ {
+ int ant, div_mode;
+@@ -6743,6 +7088,9 @@ static void rt2800_init_bbp(struct rt2x0
+ case RT3593:
+ rt2800_init_bbp_3593(rt2x00dev);
+ return;
++ case RT3883:
++ rt2800_init_bbp_3883(rt2x00dev);
++ return;
+ case RT5390:
+ case RT5392:
+ rt2800_init_bbp_53xx(rt2x00dev);
+@@ -7614,6 +7962,144 @@ static void rt2800_init_rfcsr_5350(struc
+ rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
+ }
+
++static void rt2800_init_rfcsr_3883(struct rt2x00_dev *rt2x00dev)
++{
++ u8 rfcsr;
++
++ /* TODO: get the actual ECO value from the SoC */
++ const unsigned int eco = 5;
++
++ rt2800_rf_init_calibration(rt2x00dev, 2);
++
++ rt2800_rfcsr_write(rt2x00dev, 0, 0xe0);
++ rt2800_rfcsr_write(rt2x00dev, 1, 0x03);
++ rt2800_rfcsr_write(rt2x00dev, 2, 0x50);
++ rt2800_rfcsr_write(rt2x00dev, 3, 0x20);
++ rt2800_rfcsr_write(rt2x00dev, 4, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 5, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 6, 0x40);
++ rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 8, 0x5b);
++ rt2800_rfcsr_write(rt2x00dev, 9, 0x08);
++ rt2800_rfcsr_write(rt2x00dev, 10, 0xd3);
++ rt2800_rfcsr_write(rt2x00dev, 11, 0x48);
++ rt2800_rfcsr_write(rt2x00dev, 12, 0x1a);
++ rt2800_rfcsr_write(rt2x00dev, 13, 0x12);
++ rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 16, 0x00);
++
++ /* RFCSR 17 will be initialized later based on the
++ * frequency offset stored in the EEPROM
++ */
++
++ rt2800_rfcsr_write(rt2x00dev, 18, 0x40);
++ rt2800_rfcsr_write(rt2x00dev, 19, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 20, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 21, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
++ rt2800_rfcsr_write(rt2x00dev, 23, 0xc0);
++ rt2800_rfcsr_write(rt2x00dev, 24, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 25, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 26, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 29, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
++ rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
++ rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
++ rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 34, 0x20);
++ rt2800_rfcsr_write(rt2x00dev, 35, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 37, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 38, 0x86);
++ rt2800_rfcsr_write(rt2x00dev, 39, 0x23);
++ rt2800_rfcsr_write(rt2x00dev, 40, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 41, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 42, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 43, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 44, 0x93);
++ rt2800_rfcsr_write(rt2x00dev, 45, 0xbb);
++ rt2800_rfcsr_write(rt2x00dev, 46, 0x60);
++ rt2800_rfcsr_write(rt2x00dev, 47, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 48, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 49, 0x8e);
++ rt2800_rfcsr_write(rt2x00dev, 50, 0x86);
++ rt2800_rfcsr_write(rt2x00dev, 51, 0x51);
++ rt2800_rfcsr_write(rt2x00dev, 52, 0x05);
++ rt2800_rfcsr_write(rt2x00dev, 53, 0x76);
++ rt2800_rfcsr_write(rt2x00dev, 54, 0x76);
++ rt2800_rfcsr_write(rt2x00dev, 55, 0x76);
++ rt2800_rfcsr_write(rt2x00dev, 56, 0xdb);
++ rt2800_rfcsr_write(rt2x00dev, 57, 0x3e);
++ rt2800_rfcsr_write(rt2x00dev, 58, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 59, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 60, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 61, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 62, 0x00);
++ rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
++
++ /* TODO: rx filter calibration? */
++
++ rt2800_bbp_write(rt2x00dev, 137, 0x0f);
++
++ rt2800_bbp_write(rt2x00dev, 163, 0x9d);
++
++ rt2800_bbp_write(rt2x00dev, 105, 0x05);
++
++ rt2800_bbp_write(rt2x00dev, 179, 0x02);
++ rt2800_bbp_write(rt2x00dev, 180, 0x00);
++ rt2800_bbp_write(rt2x00dev, 182, 0x40);
++ rt2800_bbp_write(rt2x00dev, 180, 0x01);
++ rt2800_bbp_write(rt2x00dev, 182, 0x9c);
++
++ rt2800_bbp_write(rt2x00dev, 179, 0x00);
++
++ rt2800_bbp_write(rt2x00dev, 142, 0x04);
++ rt2800_bbp_write(rt2x00dev, 143, 0x3b);
++ rt2800_bbp_write(rt2x00dev, 142, 0x06);
++ rt2800_bbp_write(rt2x00dev, 143, 0xa0);
++ rt2800_bbp_write(rt2x00dev, 142, 0x07);
++ rt2800_bbp_write(rt2x00dev, 143, 0xa1);
++ rt2800_bbp_write(rt2x00dev, 142, 0x08);
++ rt2800_bbp_write(rt2x00dev, 143, 0xa2);
++ rt2800_bbp_write(rt2x00dev, 148, 0xc8);
++
++ if (eco == 5) {
++ rt2800_rfcsr_write(rt2x00dev, 32, 0xd8);
++ rt2800_rfcsr_write(rt2x00dev, 33, 0x32);
++ }
++
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 2);
++ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_BP, 0);
++ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1);
++ rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
++ msleep(1);
++ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 0);
++ rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
++
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
++ rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
++ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
++
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 6);
++ rfcsr |= 0xc0;
++ rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
++
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 22);
++ rfcsr |= 0x20;
++ rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
++
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 46);
++ rfcsr |= 0x20;
++ rt2800_rfcsr_write(rt2x00dev, 46, rfcsr);
++
++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 20);
++ rfcsr &= ~0xee;
++ rt2800_rfcsr_write(rt2x00dev, 20, rfcsr);
++}
++
+ static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev)
+ {
+ rt2800_rf_init_calibration(rt2x00dev, 2);
+@@ -8456,6 +8942,9 @@ static void rt2800_init_rfcsr(struct rt2
+ case RT3390:
+ rt2800_init_rfcsr_3390(rt2x00dev);
+ break;
++ case RT3883:
++ rt2800_init_rfcsr_3883(rt2x00dev);
++ break;
+ case RT3572:
+ rt2800_init_rfcsr_3572(rt2x00dev);
+ break;
+@@ -8661,7 +9150,8 @@ static u8 rt2800_get_txmixer_gain_24g(st
+ {
+ u16 word;
+
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ return 0;
+
+ word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG);
+@@ -8675,7 +9165,8 @@ static u8 rt2800_get_txmixer_gain_5g(str
+ {
+ u16 word;
+
+- if (rt2x00_rt(rt2x00dev, RT3593))
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883))
+ return 0;
+
+ word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A);
+@@ -8781,7 +9272,8 @@ static int rt2800_validate_eeprom(struct
+ word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2);
+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
+ rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
+- if (!rt2x00_rt(rt2x00dev, RT3593)) {
++ if (!rt2x00_rt(rt2x00dev, RT3593) &&
++ !rt2x00_rt(rt2x00dev, RT3883)) {
+ if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
+ rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
+ rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
+@@ -8801,7 +9293,8 @@ static int rt2800_validate_eeprom(struct
+ word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2);
+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
+ rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
+- if (!rt2x00_rt(rt2x00dev, RT3593)) {
++ if (!rt2x00_rt(rt2x00dev, RT3593) &&
++ !rt2x00_rt(rt2x00dev, RT3883)) {
+ if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
+ rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
+ rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
+@@ -8809,7 +9302,8 @@ static int rt2800_validate_eeprom(struct
+ }
+ rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
+
+- if (rt2x00_rt(rt2x00dev, RT3593)) {
++ if (rt2x00_rt(rt2x00dev, RT3593) ||
++ rt2x00_rt(rt2x00dev, RT3883)) {
+ word = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2);
+ if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0x00 ||
+ rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0xff)
+@@ -8848,6 +9342,8 @@ static int rt2800_init_eeprom(struct rt2
+ rf = rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID);
+ else if (rt2x00_rt(rt2x00dev, RT3352))
+ rf = RF3322;
++ else if (rt2x00_rt(rt2x00dev, RT3883))
++ rf = RF3853;
+ else if (rt2x00_rt(rt2x00dev, RT5350))
+ rf = RF5350;
+ else
+@@ -8868,6 +9364,7 @@ static int rt2800_init_eeprom(struct rt2
+ case RF3290:
+ case RF3320:
+ case RF3322:
++ case RF3853:
+ case RF5350:
+ case RF5360:
+ case RF5362:
+@@ -9154,6 +9651,66 @@ static const struct rf_channel rf_vals_3
+ {14, 0xF0, 2, 0x18},
+ };
+
++static const struct rf_channel rf_vals_3853[] = {
++ {1, 241, 6, 2},
++ {2, 241, 6, 7},
++ {3, 242, 6, 2},
++ {4, 242, 6, 7},
++ {5, 243, 6, 2},
++ {6, 243, 6, 7},
++ {7, 244, 6, 2},
++ {8, 244, 6, 7},
++ {9, 245, 6, 2},
++ {10, 245, 6, 7},
++ {11, 246, 6, 2},
++ {12, 246, 6, 7},
++ {13, 247, 6, 2},
++ {14, 248, 6, 4},
++
++ {36, 0x56, 8, 4},
++ {38, 0x56, 8, 6},
++ {40, 0x56, 8, 8},
++ {44, 0x57, 8, 0},
++ {46, 0x57, 8, 2},
++ {48, 0x57, 8, 4},
++ {52, 0x57, 8, 8},
++ {54, 0x57, 8, 10},
++ {56, 0x58, 8, 0},
++ {60, 0x58, 8, 4},
++ {62, 0x58, 8, 6},
++ {64, 0x58, 8, 8},
++
++ {100, 0x5b, 8, 8},
++ {102, 0x5b, 8, 10},
++ {104, 0x5c, 8, 0},
++ {108, 0x5c, 8, 4},
++ {110, 0x5c, 8, 6},
++ {112, 0x5c, 8, 8},
++ {114, 0x5c, 8, 10},
++ {116, 0x5d, 8, 0},
++ {118, 0x5d, 8, 2},
++ {120, 0x5d, 8, 4},
++ {124, 0x5d, 8, 8},
++ {126, 0x5d, 8, 10},
++ {128, 0x5e, 8, 0},
++ {132, 0x5e, 8, 4},
++ {134, 0x5e, 8, 6},
++ {136, 0x5e, 8, 8},
++ {140, 0x5f, 8, 0},
++
++ {149, 0x5f, 8, 9},
++ {151, 0x5f, 8, 11},
++ {153, 0x60, 8, 1},
++ {157, 0x60, 8, 5},
++ {159, 0x60, 8, 7},
++ {161, 0x60, 8, 9},
++ {165, 0x61, 8, 1},
++ {167, 0x61, 8, 3},
++ {169, 0x61, 8, 5},
++ {171, 0x61, 8, 7},
++ {173, 0x61, 8, 9},
++};
++
+ static const struct rf_channel rf_vals_5592_xtal20[] = {
+ /* Channel, N, K, mod, R */
+ {1, 482, 4, 10, 3},
+@@ -9417,6 +9974,11 @@ static int rt2800_probe_hw_mode(struct r
+ spec->channels = rf_vals_3x;
+ break;
+
++ case RF3853:
++ spec->num_channels = ARRAY_SIZE(rf_vals_3853);
++ spec->channels = rf_vals_3853;
++ break;
++
+ case RF5592:
+ reg = rt2800_register_read(rt2x00dev, MAC_DEBUG_INDEX);
+ if (rt2x00_get_field32(reg, MAC_DEBUG_INDEX_XTAL)) {
+@@ -9536,6 +10098,7 @@ static int rt2800_probe_hw_mode(struct r
+ case RF3053:
+ case RF3070:
+ case RF3290:
++ case RF3853:
+ case RF5350:
+ case RF5360:
+ case RF5362:
+@@ -9578,6 +10141,7 @@ static int rt2800_probe_rt(struct rt2x00
+ case RT3390:
+ case RT3572:
+ case RT3593:
++ case RT3883:
+ case RT5350:
+ case RT5390:
+ case RT5392:
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
+@@ -51,9 +51,16 @@ static bool rt2800soc_hwcrypt_disabled(s
+
+ static void rt2800soc_disable_radio(struct rt2x00_dev *rt2x00dev)
+ {
++ u32 reg;
++
+ rt2800_disable_radio(rt2x00dev);
+ rt2x00mmio_register_write(rt2x00dev, PWR_PIN_CFG, 0);
+- rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, 0);
++
++ reg = 0;
++ if (rt2x00_rt(rt2x00dev, RT3883))
++ rt2x00_set_field32(&reg, TX_PIN_CFG_RFTR_EN, 1);
++
++ rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, reg);
+ }
+
+ static int rt2800soc_set_device_state(struct rt2x00_dev *rt2x00dev,
diff --git a/package/kernel/mac80211/patches/rt2x00/502-rt2x00-rt2800lib-enable-support-for-RT3883.patch b/package/kernel/mac80211/patches/rt2x00/502-rt2x00-rt2800lib-enable-support-for-RT3883.patch
deleted file mode 100644
index 95cdc7fa6a..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/502-rt2x00-rt2800lib-enable-support-for-RT3883.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From 4f16582c93a71eba9d389e0f0a8aa9099a9587cd Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Mar 2013 19:26:26 +0100
-Subject: [PATCH] rt2x00: rt2800lib: enable support for RT3883
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -9578,6 +9578,7 @@ static int rt2800_probe_rt(struct rt2x00
- case RT3390:
- case RT3572:
- case RT3593:
-+ case RT3883:
- case RT5350:
- case RT5390:
- case RT5392:
diff --git a/package/kernel/mac80211/patches/rt2x00/503-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch b/package/kernel/mac80211/patches/rt2x00/503-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch
deleted file mode 100644
index 160319633b..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/503-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From ecb394ccf248d8652c463133c4f404458a57a9c1 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Mar 2013 19:26:26 +0100
-Subject: [PATCH] rt2x00: rt2800lib: add rf_vals for RF3853
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800.h | 4 +-
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 65 +++++++++++++++++++++++++++++++
- 2 files changed, 68 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
-@@ -48,7 +48,8 @@
- * RF2853 2.4G/5G 3T3R
- * RF3320 2.4G 1T1R(RT3350/RT3370/RT3390)
- * RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392)
-- * RF3053 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662)
-+ * RF3053 2.4G/5G 3T3R(RT3563/RT3573/RT3593)
-+ * RF3853 2.4G/5G 3T3R(RT3883/RT3662)
- * RF5592 2.4G/5G 2T2R
- * RF3070 2.4G 1T1R
- * RF5360 2.4G 1T1R
-@@ -72,6 +73,7 @@
- #define RF5592 0x000f
- #define RF3070 0x3070
- #define RF3290 0x3290
-+#define RF3853 0x3853
- #define RF5350 0x5350
- #define RF5360 0x5360
- #define RF5362 0x5362
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -9154,6 +9154,66 @@ static const struct rf_channel rf_vals_3
- {14, 0xF0, 2, 0x18},
- };
-
-+static const struct rf_channel rf_vals_3853[] = {
-+ {1, 241, 6, 2},
-+ {2, 241, 6, 7},
-+ {3, 242, 6, 2},
-+ {4, 242, 6, 7},
-+ {5, 243, 6, 2},
-+ {6, 243, 6, 7},
-+ {7, 244, 6, 2},
-+ {8, 244, 6, 7},
-+ {9, 245, 6, 2},
-+ {10, 245, 6, 7},
-+ {11, 246, 6, 2},
-+ {12, 246, 6, 7},
-+ {13, 247, 6, 2},
-+ {14, 248, 6, 4},
-+
-+ {36, 0x56, 8, 4},
-+ {38, 0x56, 8, 6},
-+ {40, 0x56, 8, 8},
-+ {44, 0x57, 8, 0},
-+ {46, 0x57, 8, 2},
-+ {48, 0x57, 8, 4},
-+ {52, 0x57, 8, 8},
-+ {54, 0x57, 8, 10},
-+ {56, 0x58, 8, 0},
-+ {60, 0x58, 8, 4},
-+ {62, 0x58, 8, 6},
-+ {64, 0x58, 8, 8},
-+
-+ {100, 0x5b, 8, 8},
-+ {102, 0x5b, 8, 10},
-+ {104, 0x5c, 8, 0},
-+ {108, 0x5c, 8, 4},
-+ {110, 0x5c, 8, 6},
-+ {112, 0x5c, 8, 8},
-+ {114, 0x5c, 8, 10},
-+ {116, 0x5d, 8, 0},
-+ {118, 0x5d, 8, 2},
-+ {120, 0x5d, 8, 4},
-+ {124, 0x5d, 8, 8},
-+ {126, 0x5d, 8, 10},
-+ {128, 0x5e, 8, 0},
-+ {132, 0x5e, 8, 4},
-+ {134, 0x5e, 8, 6},
-+ {136, 0x5e, 8, 8},
-+ {140, 0x5f, 8, 0},
-+
-+ {149, 0x5f, 8, 9},
-+ {151, 0x5f, 8, 11},
-+ {153, 0x60, 8, 1},
-+ {157, 0x60, 8, 5},
-+ {159, 0x60, 8, 7},
-+ {161, 0x60, 8, 9},
-+ {165, 0x61, 8, 1},
-+ {167, 0x61, 8, 3},
-+ {169, 0x61, 8, 5},
-+ {171, 0x61, 8, 7},
-+ {173, 0x61, 8, 9},
-+};
-+
- static const struct rf_channel rf_vals_5592_xtal20[] = {
- /* Channel, N, K, mod, R */
- {1, 482, 4, 10, 3},
-@@ -9417,6 +9477,11 @@ static int rt2800_probe_hw_mode(struct r
- spec->channels = rf_vals_3x;
- break;
-
-+ case RF3853:
-+ spec->num_channels = ARRAY_SIZE(rf_vals_3853);
-+ spec->channels = rf_vals_3853;
-+ break;
-+
- case RF5592:
- reg = rt2800_register_read(rt2x00dev, MAC_DEBUG_INDEX);
- if (rt2x00_get_field32(reg, MAC_DEBUG_INDEX_XTAL)) {
diff --git a/package/kernel/mac80211/patches/rt2x00/504-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch b/package/kernel/mac80211/patches/rt2x00/504-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch
deleted file mode 100644
index dbe592646b..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/504-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From f8e3fcf18e1f2d7f9e6a9680c5452da090f33d88 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Thu, 1 Aug 2013 14:40:44 +0200
-Subject: [PATCH] rt2x00: rt2800lib: enable VCO calibration for RF3853
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -5051,6 +5051,7 @@ void rt2800_vco_calibration(struct rt2x0
- case RF3053:
- case RF3070:
- case RF3290:
-+ case RF3853:
- case RF5350:
- case RF5360:
- case RF5362:
-@@ -9601,6 +9602,7 @@ static int rt2800_probe_hw_mode(struct r
- case RF3053:
- case RF3070:
- case RF3290:
-+ case RF3853:
- case RF5350:
- case RF5360:
- case RF5362:
diff --git a/package/kernel/mac80211/patches/rt2x00/505-rt2x00-rt2800lib-add-channel-configuration-function-.patch b/package/kernel/mac80211/patches/rt2x00/505-rt2x00-rt2800lib-add-channel-configuration-function-.patch
deleted file mode 100644
index dc538df484..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/505-rt2x00-rt2800lib-add-channel-configuration-function-.patch
+++ /dev/null
@@ -1,235 +0,0 @@
-From 6e3a17190815c6aa4dc53c2cfe9125fb1154f187 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Mar 2013 19:26:27 +0100
-Subject: [PATCH] rt2x00: rt2800lib: add channel configuration function for
- RF3853
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 208 +++++++++++++++++++++++++++++++
- 1 file changed, 208 insertions(+)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -2880,6 +2880,211 @@ static void rt2800_config_channel_rf3053
- }
- }
-
-+static void rt2800_config_channel_rf3853(struct rt2x00_dev *rt2x00dev,
-+ struct ieee80211_conf *conf,
-+ struct rf_channel *rf,
-+ struct channel_info *info)
-+{
-+ u8 rfcsr;
-+ u8 bbp;
-+ u8 pwr1, pwr2, pwr3;
-+
-+ const bool txbf_enabled = false; /* TODO */
-+
-+ /* TODO: add band selection */
-+
-+ if (rf->channel <= 14)
-+ rt2800_rfcsr_write(rt2x00dev, 6, 0x40);
-+ else if (rf->channel < 132)
-+ rt2800_rfcsr_write(rt2x00dev, 6, 0x80);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 6, 0x40);
-+
-+ rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
-+ rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
-+
-+ if (rf->channel <= 14)
-+ rt2800_rfcsr_write(rt2x00dev, 11, 0x46);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 11, 0x48);
-+
-+ if (rf->channel <= 14)
-+ rt2800_rfcsr_write(rt2x00dev, 12, 0x1a);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 12, 0x52);
-+
-+ rt2800_rfcsr_write(rt2x00dev, 13, 0x12);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
-+ rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
-+ rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
-+ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
-+ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
-+ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
-+ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
-+ rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
-+ rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
-+
-+ switch (rt2x00dev->default_ant.tx_chain_num) {
-+ case 3:
-+ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
-+ /* fallthrough */
-+ case 2:
-+ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
-+ /* fallthrough */
-+ case 1:
-+ rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
-+ break;
-+ }
-+
-+ switch (rt2x00dev->default_ant.rx_chain_num) {
-+ case 3:
-+ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
-+ /* fallthrough */
-+ case 2:
-+ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
-+ /* fallthrough */
-+ case 1:
-+ rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
-+ break;
-+ }
-+ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
-+
-+ rt2800_freq_cal_mode1(rt2x00dev);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 30);
-+ if (!conf_is_ht40(conf))
-+ rfcsr &= ~(0x06);
-+ else
-+ rfcsr |= 0x06;
-+ rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
-+
-+ if (rf->channel <= 14)
-+ rt2800_rfcsr_write(rt2x00dev, 31, 0xa0);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
-+
-+ if (conf_is_ht40(conf))
-+ rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 32, 0xd8);
-+
-+ if (rf->channel <= 14)
-+ rt2800_rfcsr_write(rt2x00dev, 34, 0x3c);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 34, 0x20);
-+
-+ /* loopback RF_BS */
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 36);
-+ if (rf->channel <= 14)
-+ rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 1);
-+ else
-+ rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 0);
-+ rt2800_rfcsr_write(rt2x00dev, 36, rfcsr);
-+
-+ if (rf->channel <= 14)
-+ rfcsr = 0x23;
-+ else if (rf->channel < 100)
-+ rfcsr = 0x36;
-+ else if (rf->channel < 132)
-+ rfcsr = 0x32;
-+ else
-+ rfcsr = 0x30;
-+
-+ if (txbf_enabled)
-+ rfcsr |= 0x40;
-+
-+ rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
-+
-+ if (rf->channel <= 14)
-+ rt2800_rfcsr_write(rt2x00dev, 44, 0x93);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 44, 0x9b);
-+
-+ if (rf->channel <= 14)
-+ rfcsr = 0xbb;
-+ else if (rf->channel < 100)
-+ rfcsr = 0xeb;
-+ else if (rf->channel < 132)
-+ rfcsr = 0xb3;
-+ else
-+ rfcsr = 0x9b;
-+ rt2800_rfcsr_write(rt2x00dev, 45, rfcsr);
-+
-+ if (rf->channel <= 14)
-+ rfcsr = 0x8e;
-+ else
-+ rfcsr = 0x8a;
-+
-+ if (txbf_enabled)
-+ rfcsr |= 0x20;
-+
-+ rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
-+
-+ rt2800_rfcsr_write(rt2x00dev, 50, 0x86);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 51);
-+ if (rf->channel <= 14)
-+ rt2800_rfcsr_write(rt2x00dev, 51, 0x75);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 51, 0x51);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 52);
-+ if (rf->channel <= 14)
-+ rt2800_rfcsr_write(rt2x00dev, 52, 0x45);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 52, 0x05);
-+
-+ if (rf->channel <= 14) {
-+ pwr1 = info->default_power1 & 0x1f;
-+ pwr2 = info->default_power2 & 0x1f;
-+ pwr3 = info->default_power3 & 0x1f;
-+ } else {
-+ pwr1 = 0x48 | ((info->default_power1 & 0x18) << 1) |
-+ (info->default_power1 & 0x7);
-+ pwr2 = 0x48 | ((info->default_power2 & 0x18) << 1) |
-+ (info->default_power2 & 0x7);
-+ pwr3 = 0x48 | ((info->default_power3 & 0x18) << 1) |
-+ (info->default_power3 & 0x7);
-+ }
-+
-+ rt2800_rfcsr_write(rt2x00dev, 53, pwr1);
-+ rt2800_rfcsr_write(rt2x00dev, 54, pwr2);
-+ rt2800_rfcsr_write(rt2x00dev, 55, pwr3);
-+
-+ rt2x00_dbg(rt2x00dev, "Channel:%d, pwr1:%02x, pwr2:%02x, pwr3:%02x\n",
-+ rf->channel, pwr1, pwr2, pwr3);
-+
-+ bbp = (info->default_power1 >> 5) |
-+ ((info->default_power2 & 0xe0) >> 1);
-+ rt2800_bbp_write(rt2x00dev, 109, bbp);
-+
-+ bbp = rt2800_bbp_read(rt2x00dev, 110);
-+ bbp &= 0x0f;
-+ bbp |= (info->default_power3 & 0xe0) >> 1;
-+ rt2800_bbp_write(rt2x00dev, 110, bbp);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 57);
-+ if (rf->channel <= 14)
-+ rt2800_rfcsr_write(rt2x00dev, 57, 0x6e);
-+ else
-+ rt2800_rfcsr_write(rt2x00dev, 57, 0x3e);
-+
-+ /* Enable RF tuning */
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 3);
-+ rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
-+ rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
-+
-+ udelay(2000);
-+
-+ bbp = rt2800_bbp_read(rt2x00dev, 49);
-+ /* clear update flag */
-+ rt2800_bbp_write(rt2x00dev, 49, bbp & 0xfe);
-+ rt2800_bbp_write(rt2x00dev, 49, bbp);
-+
-+ /* TODO: add calibration for TxBF */
-+}
-+
- #define POWER_BOUND 0x27
- #define POWER_BOUND_5G 0x2b
-
-@@ -3734,6 +3939,9 @@ static void rt2800_config_channel(struct
- case RF3322:
- rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info);
- break;
-+ case RF3853:
-+ rt2800_config_channel_rf3853(rt2x00dev, conf, rf, info);
-+ break;
- case RF3070:
- case RF5350:
- case RF5360:
diff --git a/package/kernel/mac80211/patches/rt2x00/506-rt2x00-rt2800lib-enable-RF3853-support.patch b/package/kernel/mac80211/patches/rt2x00/506-rt2x00-rt2800lib-enable-RF3853-support.patch
deleted file mode 100644
index c6ffd7a374..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/506-rt2x00-rt2800lib-enable-RF3853-support.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From afd38ae82226551bf879b6c7c4b620c271fee9d2 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Thu, 1 Aug 2013 14:42:05 +0200
-Subject: [PATCH] rt2x00: rt2800lib: enable RF3853 support
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -9077,6 +9077,7 @@ static int rt2800_init_eeprom(struct rt2
- case RF3290:
- case RF3320:
- case RF3322:
-+ case RF3853:
- case RF5350:
- case RF5360:
- case RF5362:
diff --git a/package/kernel/mac80211/patches/rt2x00/507-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch b/package/kernel/mac80211/patches/rt2x00/507-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch
deleted file mode 100644
index 102374a474..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/507-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 0094872a5e8e4664c6ea1b2dfa487063d39ae363 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Mar 2013 19:26:26 +0100
-Subject: [PATCH] rt2x00: rt2800lib: add MAC register initialization for
- RT3883
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800.h | 14 ++++++++++++++
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 19 ++++++++++++++++---
- 2 files changed, 30 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
-@@ -1728,6 +1728,20 @@
- #define TX_PWR_CFG_9B_STBC_MCS7 FIELD32(0x000000ff)
-
- /*
-+ * TX_TXBF_CFG:
-+ */
-+#define TX_TXBF_CFG_0 0x138c
-+#define TX_TXBF_CFG_1 0x13a4
-+#define TX_TXBF_CFG_2 0x13a8
-+#define TX_TXBF_CFG_3 0x13ac
-+
-+/*
-+ * TX_FBK_CFG_3S:
-+ */
-+#define TX_FBK_CFG_3S_0 0x13c4
-+#define TX_FBK_CFG_3S_1 0x13c8
-+
-+/*
- * RX_FILTER_CFG: RX configuration register.
- */
- #define RX_FILTER_CFG 0x1400
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -5679,6 +5679,12 @@ static int rt2800_init_registers(struct
- rt2800_register_write(rt2x00dev, TX_SW_CFG2,
- 0x00000000);
- }
-+ } else if (rt2x00_rt(rt2x00dev, RT3883)) {
-+ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402);
-+ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
-+ rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00040000);
-+ rt2800_register_write(rt2x00dev, TX_TXBF_CFG_0, 0x8000fc21);
-+ rt2800_register_write(rt2x00dev, TX_TXBF_CFG_3, 0x00009c40);
- } else if (rt2x00_rt(rt2x00dev, RT5390) ||
- rt2x00_rt(rt2x00dev, RT5392) ||
- rt2x00_rt(rt2x00dev, RT6352)) {
-@@ -5892,6 +5898,11 @@ static int rt2800_init_registers(struct
- reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002;
- rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, reg);
-
-+ if (rt2x00_rt(rt2x00dev, RT3883)) {
-+ rt2800_register_write(rt2x00dev, TX_FBK_CFG_3S_0, 0x12111008);
-+ rt2800_register_write(rt2x00dev, TX_FBK_CFG_3S_1, 0x16151413);
-+ }
-+
- reg = rt2800_register_read(rt2x00dev, TX_RTS_CFG);
- rt2x00_set_field32(&reg, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 7);
- rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES,
diff --git a/package/kernel/mac80211/patches/rt2x00/508-rt2x00-rt2800soc-fix-rt2800soc_disable_radio-for-RT3.patch b/package/kernel/mac80211/patches/rt2x00/508-rt2x00-rt2800soc-fix-rt2800soc_disable_radio-for-RT3.patch
deleted file mode 100644
index d68ad50447..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/508-rt2x00-rt2800soc-fix-rt2800soc_disable_radio-for-RT3.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 6c2d32478159fffff0b85abb6817a21bb2338231 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Mar 2013 19:26:27 +0100
-Subject: [PATCH] rt2x00: rt2800soc: fix rt2800soc_disable_radio for RT3883
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800soc.c | 9 ++++++++-
- 1 file changed, 8 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
-@@ -51,9 +51,16 @@ static bool rt2800soc_hwcrypt_disabled(s
-
- static void rt2800soc_disable_radio(struct rt2x00_dev *rt2x00dev)
- {
-+ u32 reg;
-+
- rt2800_disable_radio(rt2x00dev);
- rt2x00mmio_register_write(rt2x00dev, PWR_PIN_CFG, 0);
-- rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, 0);
-+
-+ reg = 0;
-+ if (rt2x00_rt(rt2x00dev, RT3883))
-+ rt2x00_set_field32(&reg, TX_PIN_CFG_RFTR_EN, 1);
-+
-+ rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, reg);
- }
-
- static int rt2800soc_set_device_state(struct rt2x00_dev *rt2x00dev,
diff --git a/package/kernel/mac80211/patches/rt2x00/509-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch b/package/kernel/mac80211/patches/rt2x00/509-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch
deleted file mode 100644
index 3879d0f712..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/509-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From 84833056aa7dd25f5b097e31c78f2a0914c5160c Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Mar 2013 19:26:26 +0100
-Subject: [PATCH] rt2x00: rt2800lib: add BBP register initialization for
- RT3883
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 44 +++++++++++++++++++++++++++++++
- 1 file changed, 44 insertions(+)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -6519,6 +6519,47 @@ static void rt2800_init_bbp_3593(struct
- rt2800_bbp_write(rt2x00dev, 103, 0xc0);
- }
-
-+static void rt2800_init_bbp_3883(struct rt2x00_dev *rt2x00dev)
-+{
-+ rt2800_init_bbp_early(rt2x00dev);
-+
-+ rt2800_bbp_write(rt2x00dev, 4, 0x50);
-+ rt2800_bbp_write(rt2x00dev, 47, 0x48);
-+
-+ rt2800_bbp_write(rt2x00dev, 86, 0x46);
-+ rt2800_bbp_write(rt2x00dev, 88, 0x90);
-+
-+ rt2800_bbp_write(rt2x00dev, 92, 0x02);
-+
-+ rt2800_bbp_write(rt2x00dev, 103, 0xc0);
-+ rt2800_bbp_write(rt2x00dev, 104, 0x92);
-+ rt2800_bbp_write(rt2x00dev, 105, 0x34);
-+ rt2800_bbp_write(rt2x00dev, 106, 0x12);
-+ rt2800_bbp_write(rt2x00dev, 120, 0x50);
-+ rt2800_bbp_write(rt2x00dev, 137, 0x0f);
-+ rt2800_bbp_write(rt2x00dev, 163, 0x9d);
-+
-+ /* Set ITxBF timeout to 0x9C40=1000msec */
-+ rt2800_bbp_write(rt2x00dev, 179, 0x02);
-+ rt2800_bbp_write(rt2x00dev, 180, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 182, 0x40);
-+ rt2800_bbp_write(rt2x00dev, 180, 0x01);
-+ rt2800_bbp_write(rt2x00dev, 182, 0x9c);
-+
-+ rt2800_bbp_write(rt2x00dev, 179, 0x00);
-+
-+ /* Reprogram the inband interface to put right values in RXWI */
-+ rt2800_bbp_write(rt2x00dev, 142, 0x04);
-+ rt2800_bbp_write(rt2x00dev, 143, 0x3b);
-+ rt2800_bbp_write(rt2x00dev, 142, 0x06);
-+ rt2800_bbp_write(rt2x00dev, 143, 0xa0);
-+ rt2800_bbp_write(rt2x00dev, 142, 0x07);
-+ rt2800_bbp_write(rt2x00dev, 143, 0xa1);
-+ rt2800_bbp_write(rt2x00dev, 142, 0x08);
-+ rt2800_bbp_write(rt2x00dev, 143, 0xa2);
-+ rt2800_bbp_write(rt2x00dev, 148, 0xc8);
-+}
-+
- static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev)
- {
- int ant, div_mode;
-@@ -6963,6 +7004,9 @@ static void rt2800_init_bbp(struct rt2x0
- case RT3593:
- rt2800_init_bbp_3593(rt2x00dev);
- return;
-+ case RT3883:
-+ rt2800_init_bbp_3883(rt2x00dev);
-+ return;
- case RT5390:
- case RT5392:
- rt2800_init_bbp_53xx(rt2x00dev);
diff --git a/package/kernel/mac80211/patches/rt2x00/510-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch b/package/kernel/mac80211/patches/rt2x00/510-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch
deleted file mode 100644
index c3c37e902f..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/510-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch
+++ /dev/null
@@ -1,178 +0,0 @@
-From 99c659cf345640fd0f733cbcaf4583cc2c868ec0 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 29 Apr 2013 13:21:48 +0200
-Subject: [PATCH] rt2x00: rt2800lib: add RFCSR initialization for RT3883
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800.h | 1 +
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 141 +++++++++++++++++++++++++++++++
- 2 files changed, 142 insertions(+)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
-@@ -2312,6 +2312,7 @@ struct mac_iveiv_entry {
- /*
- * RFCSR 2:
- */
-+#define RFCSR2_RESCAL_BP FIELD8(0x40)
- #define RFCSR2_RESCAL_EN FIELD8(0x80)
- #define RFCSR2_RX2_EN_MT7620 FIELD8(0x02)
- #define RFCSR2_TX2_EN_MT7620 FIELD8(0x20)
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -7878,6 +7878,144 @@ static void rt2800_init_rfcsr_5350(struc
- rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
- }
-
-+static void rt2800_init_rfcsr_3883(struct rt2x00_dev *rt2x00dev)
-+{
-+ u8 rfcsr;
-+
-+ /* TODO: get the actual ECO value from the SoC */
-+ const unsigned int eco = 5;
-+
-+ rt2800_rf_init_calibration(rt2x00dev, 2);
-+
-+ rt2800_rfcsr_write(rt2x00dev, 0, 0xe0);
-+ rt2800_rfcsr_write(rt2x00dev, 1, 0x03);
-+ rt2800_rfcsr_write(rt2x00dev, 2, 0x50);
-+ rt2800_rfcsr_write(rt2x00dev, 3, 0x20);
-+ rt2800_rfcsr_write(rt2x00dev, 4, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 5, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 6, 0x40);
-+ rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 8, 0x5b);
-+ rt2800_rfcsr_write(rt2x00dev, 9, 0x08);
-+ rt2800_rfcsr_write(rt2x00dev, 10, 0xd3);
-+ rt2800_rfcsr_write(rt2x00dev, 11, 0x48);
-+ rt2800_rfcsr_write(rt2x00dev, 12, 0x1a);
-+ rt2800_rfcsr_write(rt2x00dev, 13, 0x12);
-+ rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 16, 0x00);
-+
-+ /* RFCSR 17 will be initialized later based on the
-+ * frequency offset stored in the EEPROM
-+ */
-+
-+ rt2800_rfcsr_write(rt2x00dev, 18, 0x40);
-+ rt2800_rfcsr_write(rt2x00dev, 19, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 20, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 21, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
-+ rt2800_rfcsr_write(rt2x00dev, 23, 0xc0);
-+ rt2800_rfcsr_write(rt2x00dev, 24, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 25, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 26, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 29, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
-+ rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
-+ rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
-+ rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 34, 0x20);
-+ rt2800_rfcsr_write(rt2x00dev, 35, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 37, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 38, 0x86);
-+ rt2800_rfcsr_write(rt2x00dev, 39, 0x23);
-+ rt2800_rfcsr_write(rt2x00dev, 40, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 41, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 42, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 43, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 44, 0x93);
-+ rt2800_rfcsr_write(rt2x00dev, 45, 0xbb);
-+ rt2800_rfcsr_write(rt2x00dev, 46, 0x60);
-+ rt2800_rfcsr_write(rt2x00dev, 47, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 48, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 49, 0x8e);
-+ rt2800_rfcsr_write(rt2x00dev, 50, 0x86);
-+ rt2800_rfcsr_write(rt2x00dev, 51, 0x51);
-+ rt2800_rfcsr_write(rt2x00dev, 52, 0x05);
-+ rt2800_rfcsr_write(rt2x00dev, 53, 0x76);
-+ rt2800_rfcsr_write(rt2x00dev, 54, 0x76);
-+ rt2800_rfcsr_write(rt2x00dev, 55, 0x76);
-+ rt2800_rfcsr_write(rt2x00dev, 56, 0xdb);
-+ rt2800_rfcsr_write(rt2x00dev, 57, 0x3e);
-+ rt2800_rfcsr_write(rt2x00dev, 58, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 59, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 60, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 61, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 62, 0x00);
-+ rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
-+
-+ /* TODO: rx filter calibration? */
-+
-+ rt2800_bbp_write(rt2x00dev, 137, 0x0f);
-+
-+ rt2800_bbp_write(rt2x00dev, 163, 0x9d);
-+
-+ rt2800_bbp_write(rt2x00dev, 105, 0x05);
-+
-+ rt2800_bbp_write(rt2x00dev, 179, 0x02);
-+ rt2800_bbp_write(rt2x00dev, 180, 0x00);
-+ rt2800_bbp_write(rt2x00dev, 182, 0x40);
-+ rt2800_bbp_write(rt2x00dev, 180, 0x01);
-+ rt2800_bbp_write(rt2x00dev, 182, 0x9c);
-+
-+ rt2800_bbp_write(rt2x00dev, 179, 0x00);
-+
-+ rt2800_bbp_write(rt2x00dev, 142, 0x04);
-+ rt2800_bbp_write(rt2x00dev, 143, 0x3b);
-+ rt2800_bbp_write(rt2x00dev, 142, 0x06);
-+ rt2800_bbp_write(rt2x00dev, 143, 0xa0);
-+ rt2800_bbp_write(rt2x00dev, 142, 0x07);
-+ rt2800_bbp_write(rt2x00dev, 143, 0xa1);
-+ rt2800_bbp_write(rt2x00dev, 142, 0x08);
-+ rt2800_bbp_write(rt2x00dev, 143, 0xa2);
-+ rt2800_bbp_write(rt2x00dev, 148, 0xc8);
-+
-+ if (eco == 5) {
-+ rt2800_rfcsr_write(rt2x00dev, 32, 0xd8);
-+ rt2800_rfcsr_write(rt2x00dev, 33, 0x32);
-+ }
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 2);
-+ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_BP, 0);
-+ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1);
-+ rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
-+ msleep(1);
-+ rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 0);
-+ rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
-+ rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
-+ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 6);
-+ rfcsr |= 0xc0;
-+ rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 22);
-+ rfcsr |= 0x20;
-+ rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 46);
-+ rfcsr |= 0x20;
-+ rt2800_rfcsr_write(rt2x00dev, 46, rfcsr);
-+
-+ rfcsr = rt2800_rfcsr_read(rt2x00dev, 20);
-+ rfcsr &= ~0xee;
-+ rt2800_rfcsr_write(rt2x00dev, 20, rfcsr);
-+}
-+
- static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev)
- {
- rt2800_rf_init_calibration(rt2x00dev, 2);
-@@ -8720,6 +8858,9 @@ static void rt2800_init_rfcsr(struct rt2
- case RT3390:
- rt2800_init_rfcsr_3390(rt2x00dev);
- break;
-+ case RT3883:
-+ rt2800_init_rfcsr_3883(rt2x00dev);
-+ break;
- case RT3572:
- rt2800_init_rfcsr_3572(rt2x00dev);
- break;
diff --git a/package/kernel/mac80211/patches/rt2x00/511-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch b/package/kernel/mac80211/patches/rt2x00/511-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch
deleted file mode 100644
index e74f399e65..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/511-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 86022438ffeb1b87dfcd018bf477fdbb43076691 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 8 May 2013 19:35:33 +0200
-Subject: [PATCH] rt2x00: rt2800lib: use the extended EEPROM map for RT3883
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -381,7 +381,8 @@ static unsigned int rt2800_eeprom_word_i
- wiphy_name(rt2x00dev->hw->wiphy), word))
- return 0;
-
-- if (rt2x00_rt(rt2x00dev, RT3593))
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- map = rt2800_eeprom_map_ext;
- else
- map = rt2800_eeprom_map;
diff --git a/package/kernel/mac80211/patches/rt2x00/512-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch b/package/kernel/mac80211/patches/rt2x00/512-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch
deleted file mode 100644
index 62a199d61f..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/512-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 4cf5403f02fa65dc2207f61d223cffa9ae50e907 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Thu, 1 Aug 2013 14:48:21 +0200
-Subject: [PATCH] rt2x00: rt2800lib: force rf type to RF3853 on RT3883
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -9254,6 +9254,8 @@ static int rt2800_init_eeprom(struct rt2
- rf = rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID);
- else if (rt2x00_rt(rt2x00dev, RT3352))
- rf = RF3322;
-+ else if (rt2x00_rt(rt2x00dev, RT3883))
-+ rf = RF3853;
- else if (rt2x00_rt(rt2x00dev, RT5350))
- rf = RF5350;
- else
diff --git a/package/kernel/mac80211/patches/rt2x00/513-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch b/package/kernel/mac80211/patches/rt2x00/513-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch
deleted file mode 100644
index 2b0869099e..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/513-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From 269f19c848a2380db03a3f207cafb88e28d71c53 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Mar 2013 19:26:28 +0100
-Subject: [PATCH] rt2x00: rt2800lib: add channel configuration code for RT3883
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 72 +++++++++++++++++++++++++++++--
- 1 file changed, 69 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -3902,6 +3902,36 @@ static char rt2800_txpower_to_dev(struct
- return clamp_t(char, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER);
- }
-
-+static void rt3883_bbp_adjust(struct rt2x00_dev *rt2x00dev,
-+ struct rf_channel *rf)
-+{
-+ u8 bbp;
-+
-+ bbp = (rf->channel > 14) ? 0x48 : 0x38;
-+ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, bbp);
-+
-+ rt2800_bbp_write(rt2x00dev, 69, 0x12);
-+
-+ if (rf->channel <= 14) {
-+ rt2800_bbp_write(rt2x00dev, 70, 0x0a);
-+ } else {
-+ /* Disable CCK packet detection */
-+ rt2800_bbp_write(rt2x00dev, 70, 0x00);
-+ }
-+
-+ rt2800_bbp_write(rt2x00dev, 73, 0x10);
-+
-+ if (rf->channel > 14) {
-+ rt2800_bbp_write(rt2x00dev, 62, 0x1d);
-+ rt2800_bbp_write(rt2x00dev, 63, 0x1d);
-+ rt2800_bbp_write(rt2x00dev, 64, 0x1d);
-+ } else {
-+ rt2800_bbp_write(rt2x00dev, 62, 0x2d);
-+ rt2800_bbp_write(rt2x00dev, 63, 0x2d);
-+ rt2800_bbp_write(rt2x00dev, 64, 0x2d);
-+ }
-+}
-+
- static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
- struct ieee80211_conf *conf,
- struct rf_channel *rf,
-@@ -3920,6 +3950,12 @@ static void rt2800_config_channel(struct
- rt2800_txpower_to_dev(rt2x00dev, rf->channel,
- info->default_power3);
-
-+ switch (rt2x00dev->chip.rt) {
-+ case RT3883:
-+ rt3883_bbp_adjust(rt2x00dev, rf);
-+ break;
-+ }
-+
- switch (rt2x00dev->chip.rf) {
- case RF2020:
- case RF3020:
-@@ -4024,6 +4060,15 @@ static void rt2800_config_channel(struct
- rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
- rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
- rt2800_bbp_write(rt2x00dev, 77, 0x98);
-+ } else if (rt2x00_rt(rt2x00dev, RT3883)) {
-+ rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
-+ rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
-+ rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
-+
-+ if (rt2x00dev->default_ant.rx_chain_num > 1)
-+ rt2800_bbp_write(rt2x00dev, 86, 0x46);
-+ else
-+ rt2800_bbp_write(rt2x00dev, 86, 0);
- } else {
- rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
- rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
-@@ -4037,6 +4082,7 @@ static void rt2800_config_channel(struct
- !rt2x00_rt(rt2x00dev, RT6352)) {
- if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
- rt2800_bbp_write(rt2x00dev, 82, 0x62);
-+ rt2800_bbp_write(rt2x00dev, 82, 0x62);
- rt2800_bbp_write(rt2x00dev, 75, 0x46);
- } else {
- if (rt2x00_rt(rt2x00dev, RT3593))
-@@ -4045,19 +4091,22 @@ static void rt2800_config_channel(struct
- rt2800_bbp_write(rt2x00dev, 82, 0x84);
- rt2800_bbp_write(rt2x00dev, 75, 0x50);
- }
-- if (rt2x00_rt(rt2x00dev, RT3593))
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- rt2800_bbp_write(rt2x00dev, 83, 0x8a);
- }
-
- } else {
- if (rt2x00_rt(rt2x00dev, RT3572))
- rt2800_bbp_write(rt2x00dev, 82, 0x94);
-- else if (rt2x00_rt(rt2x00dev, RT3593))
-+ else if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- rt2800_bbp_write(rt2x00dev, 82, 0x82);
- else if (!rt2x00_rt(rt2x00dev, RT6352))
- rt2800_bbp_write(rt2x00dev, 82, 0xf2);
-
-- if (rt2x00_rt(rt2x00dev, RT3593))
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- rt2800_bbp_write(rt2x00dev, 83, 0x9a);
-
- if (rt2x00_has_cap_external_lna_a(rt2x00dev))
-@@ -4190,6 +4239,23 @@ static void rt2800_config_channel(struct
-
- rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
-
-+ usleep_range(1000, 1500);
-+ }
-+
-+ if (rt2x00_rt(rt2x00dev, RT3883)) {
-+ if (!conf_is_ht40(conf))
-+ rt2800_bbp_write(rt2x00dev, 105, 0x34);
-+ else
-+ rt2800_bbp_write(rt2x00dev, 105, 0x04);
-+
-+ /* AGC init */
-+ if (rf->channel <= 14)
-+ reg = 0x2e + rt2x00dev->lna_gain;
-+ else
-+ reg = 0x20 + ((rt2x00dev->lna_gain * 5) / 3);
-+
-+ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
-+
- usleep_range(1000, 1500);
- }
-
diff --git a/package/kernel/mac80211/patches/rt2x00/514-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch b/package/kernel/mac80211/patches/rt2x00/514-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch
deleted file mode 100644
index 48283ce709..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/514-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From e37d93abaabe3ab72b0332a18092acc162307274 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 30 Sep 2013 13:57:26 +0200
-Subject: [PATCH] rt2x00: rt2800lib: fix txpower_to_dev function for RT3883
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -3889,13 +3889,15 @@ static char rt2800_txpower_to_dev(struct
- unsigned int channel,
- char txpower)
- {
-- if (rt2x00_rt(rt2x00dev, RT3593))
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- txpower = rt2x00_get_field8(txpower, EEPROM_TXPOWER_ALC);
-
- if (channel <= 14)
- return clamp_t(char, txpower, MIN_G_TXPOWER, MAX_G_TXPOWER);
-
-- if (rt2x00_rt(rt2x00dev, RT3593))
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- return clamp_t(char, txpower, MIN_A_TXPOWER_3593,
- MAX_A_TXPOWER_3593);
- else
diff --git a/package/kernel/mac80211/patches/rt2x00/515-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch b/package/kernel/mac80211/patches/rt2x00/515-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch
deleted file mode 100644
index a764c91f1b..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/515-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From c4d79e344bd580d85821390d49f92dced7d8e125 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sun, 24 Mar 2013 19:26:29 +0100
-Subject: [PATCH] rt2x00: rt2800lib: use correct txpower calculation function
- for RT3883
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -5281,7 +5281,8 @@ static void rt2800_config_txpower(struct
- struct ieee80211_channel *chan,
- int power_level)
- {
-- if (rt2x00_rt(rt2x00dev, RT3593))
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- rt2800_config_txpower_rt3593(rt2x00dev, chan, power_level);
- else if (rt2x00_rt(rt2x00dev, RT6352))
- rt2800_config_txpower_rt6352(rt2x00dev, chan, power_level);
diff --git a/package/kernel/mac80211/patches/rt2x00/516-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch b/package/kernel/mac80211/patches/rt2x00/516-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch
deleted file mode 100644
index 37239c31b2..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/516-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From caea0671cd8fd9ade4f5969cbe0ee545e94ae105 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Sat, 24 Aug 2013 11:49:55 +0200
-Subject: [PATCH] rt2x00: rt2800lib: hardcode txmixer gain values to zero for
- RT3883
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -9136,7 +9136,8 @@ static u8 rt2800_get_txmixer_gain_24g(st
- {
- u16 word;
-
-- if (rt2x00_rt(rt2x00dev, RT3593))
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- return 0;
-
- word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG);
-@@ -9150,7 +9151,8 @@ static u8 rt2800_get_txmixer_gain_5g(str
- {
- u16 word;
-
-- if (rt2x00_rt(rt2x00dev, RT3593))
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- return 0;
-
- word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A);
diff --git a/package/kernel/mac80211/patches/rt2x00/517-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch b/package/kernel/mac80211/patches/rt2x00/517-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch
deleted file mode 100644
index 197aabd7bc..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/517-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From 11c40fb47c4a4dd6ad060c2ae127ced89ffb9fe1 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Thu, 18 Apr 2013 14:33:33 +0200
-Subject: [PATCH] rt2x00: rt2800lib: use correct [RT]XWI size for RT3883
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -591,6 +591,7 @@ void rt2800_get_txwi_rxwi_size(struct rt
- {
- switch (rt2x00dev->chip.rt) {
- case RT3593:
-+ case RT3883:
- *txwi_size = TXWI_DESC_SIZE_4WORDS;
- *rxwi_size = RXWI_DESC_SIZE_5WORDS;
- break;
diff --git a/package/kernel/mac80211/patches/rt2x00/518-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch b/package/kernel/mac80211/patches/rt2x00/518-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch
deleted file mode 100644
index 30da2cbb6e..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/518-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From fa5ad9c025610c22048add2f0ad03f62b6ca1e74 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 30 Sep 2013 16:53:33 +0200
-Subject: [PATCH] rt2x00: rt2800lib: fix antenna configuration for RT3883
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -2182,7 +2182,8 @@ void rt2800_config_ant(struct rt2x00_dev
- rt2800_bbp_write(rt2x00dev, 3, r3);
- rt2800_bbp_write(rt2x00dev, 1, r1);
-
-- if (rt2x00_rt(rt2x00dev, RT3593)) {
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883)) {
- if (ant->rx_chain_num == 1)
- rt2800_bbp_write(rt2x00dev, 86, 0x00);
- else
diff --git a/package/kernel/mac80211/patches/rt2x00/519-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch b/package/kernel/mac80211/patches/rt2x00/519-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch
deleted file mode 100644
index 2514d824f2..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/519-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 6d668fef3a1baa60bdd715ee062ddb6333d2647c Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 30 Sep 2013 16:58:23 +0200
-Subject: [PATCH] rt2x00: rt2800lib: fix LNA gain configuration for RT3883
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -2205,7 +2205,8 @@ static void rt2800_config_lna_gain(struc
- eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_LNA);
- lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
- } else if (libconf->rf.channel <= 128) {
-- if (rt2x00_rt(rt2x00dev, RT3593)) {
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883)) {
- eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2);
- lna_gain = rt2x00_get_field16(eeprom,
- EEPROM_EXT_LNA2_A1);
-@@ -2215,7 +2216,8 @@ static void rt2800_config_lna_gain(struc
- EEPROM_RSSI_BG2_LNA_A1);
- }
- } else {
-- if (rt2x00_rt(rt2x00dev, RT3593)) {
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883)) {
- eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2);
- lna_gain = rt2x00_get_field16(eeprom,
- EEPROM_EXT_LNA2_A2);
diff --git a/package/kernel/mac80211/patches/rt2x00/520-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch b/package/kernel/mac80211/patches/rt2x00/520-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch
deleted file mode 100644
index 49393c2f6d..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/520-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From c49b2d829aa1c816a46a577cdec6d2ff14d9f06e Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Tue, 1 Oct 2013 15:40:08 +0200
-Subject: [PATCH] rt2x00: rt2800lib: fix VGC setup for RT3883
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 11 +++++++++--
- 1 file changed, 9 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -5534,7 +5534,8 @@ static u8 rt2800_get_default_vgc(struct
- else
- vgc = 0x2e + rt2x00dev->lna_gain;
- } else { /* 5GHZ band */
-- if (rt2x00_rt(rt2x00dev, RT3593))
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883))
- vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3;
- else if (rt2x00_rt(rt2x00dev, RT5592))
- vgc = 0x24 + (2 * rt2x00dev->lna_gain);
-@@ -5554,7 +5555,8 @@ static inline void rt2800_set_vgc(struct
- {
- if (qual->vgc_level != vgc_level) {
- if (rt2x00_rt(rt2x00dev, RT3572) ||
-- rt2x00_rt(rt2x00dev, RT3593)) {
-+ rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883)) {
- rt2800_bbp_write_with_rx_chain(rt2x00dev, 66,
- vgc_level);
- } else if (rt2x00_rt(rt2x00dev, RT5592)) {
-@@ -5601,6 +5603,11 @@ void rt2800_link_tuner(struct rt2x00_dev
- }
- break;
-
-+ case RT3883:
-+ if (qual->rssi > -65)
-+ vgc += 0x10;
-+ break;
-+
- case RT5592:
- if (qual->rssi > -65)
- vgc += 0x20;
diff --git a/package/kernel/mac80211/patches/rt2x00/521-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch b/package/kernel/mac80211/patches/rt2x00/521-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch
deleted file mode 100644
index 1e1fb6e4b5..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/521-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 1616650aea676541d4dc8adc6f4219856d193c8b Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Tue, 1 Oct 2013 17:27:57 +0200
-Subject: [PATCH] rt2x00: rt2800lib: fix EEPROM LNA validation for RT3883
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 9 ++++++---
- 1 file changed, 6 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -9269,7 +9269,8 @@ static int rt2800_validate_eeprom(struct
- word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2);
- if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
- rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
-- if (!rt2x00_rt(rt2x00dev, RT3593)) {
-+ if (!rt2x00_rt(rt2x00dev, RT3593) &&
-+ !rt2x00_rt(rt2x00dev, RT3883)) {
- if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
- rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
- rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
-@@ -9289,7 +9290,8 @@ static int rt2800_validate_eeprom(struct
- word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2);
- if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
- rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
-- if (!rt2x00_rt(rt2x00dev, RT3593)) {
-+ if (!rt2x00_rt(rt2x00dev, RT3593) &&
-+ !rt2x00_rt(rt2x00dev, RT3883)) {
- if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
- rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
- rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
-@@ -9297,7 +9299,8 @@ static int rt2800_validate_eeprom(struct
- }
- rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
-
-- if (rt2x00_rt(rt2x00dev, RT3593)) {
-+ if (rt2x00_rt(rt2x00dev, RT3593) ||
-+ rt2x00_rt(rt2x00dev, RT3883)) {
- word = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2);
- if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0x00 ||
- rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0xff)
diff --git a/package/kernel/mac80211/patches/rt2x00/522-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch b/package/kernel/mac80211/patches/rt2x00/522-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch
deleted file mode 100644
index 64dba012ec..0000000000
--- a/package/kernel/mac80211/patches/rt2x00/522-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From e3871034a0e7c8a95152dc3eafbcc4535398cbdc Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 2 Oct 2013 10:11:59 +0200
-Subject: [PATCH] rt2x00: rt2800lib: fix txpower compensation for RT3883
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -4524,6 +4524,9 @@ static u8 rt2800_compensate_txpower(stru
- if (rt2x00_rt(rt2x00dev, RT3593))
- return min_t(u8, txpower, 0xc);
-
-+ if (rt2x00_rt(rt2x00dev, RT3883))
-+ return min_t(u8, txpower, 0xf);
-+
- if (rt2x00_has_cap_power_limit(rt2x00dev)) {
- /*
- * Check if eirp txpower exceed txpower_limit.