aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel/mac80211/patches/653-0025-rtl8xxxu-Add-PHY-IQ-calibration-code-for-8188eu.patch
diff options
context:
space:
mode:
Diffstat (limited to 'package/kernel/mac80211/patches/653-0025-rtl8xxxu-Add-PHY-IQ-calibration-code-for-8188eu.patch')
-rw-r--r--package/kernel/mac80211/patches/653-0025-rtl8xxxu-Add-PHY-IQ-calibration-code-for-8188eu.patch521
1 files changed, 521 insertions, 0 deletions
diff --git a/package/kernel/mac80211/patches/653-0025-rtl8xxxu-Add-PHY-IQ-calibration-code-for-8188eu.patch b/package/kernel/mac80211/patches/653-0025-rtl8xxxu-Add-PHY-IQ-calibration-code-for-8188eu.patch
new file mode 100644
index 0000000000..ce76a67d9e
--- /dev/null
+++ b/package/kernel/mac80211/patches/653-0025-rtl8xxxu-Add-PHY-IQ-calibration-code-for-8188eu.patch
@@ -0,0 +1,521 @@
+From 9a3c53da5228607375ab69d6e3cbc375f18a4f82 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Thu, 21 Jul 2016 17:25:56 -0400
+Subject: [PATCH] rtl8xxxu: Add PHY IQ calibration code for 8188eu
+
+The vendor driver for 8188eu is a bizarre modern style code for path A
+and old-style code for path B. Most likely because the 8188eu is a
+1T1R part which never gets to the path B code.
+
+Eventually we should look into unifying all the IQ calibration code.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 489 +++++++++++++++++++++
+ 1 file changed, 489 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -384,6 +384,494 @@ static int rtl8188eu_init_phy_rf(struct
+ return ret;
+ }
+
++static int rtl8188eu_iqk_path_a(struct rtl8xxxu_priv *priv)
++{
++ u32 reg_eac, reg_e94, reg_e9c;
++ int result = 0;
++
++ /* Path A IQK setting */
++ rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x10008c1c);
++ rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x30008c1c);
++
++ rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x8214032a);
++ rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160000);
++
++ /* LO calibration setting */
++ rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911);
++
++ /* One shot, path A LOK & IQK */
++ rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
++ rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
++
++ mdelay(10);
++
++ /* Check failed */
++ reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
++ reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
++ reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
++
++ if (!(reg_eac & BIT(28)) &&
++ ((reg_e94 & 0x03ff0000) != 0x01420000) &&
++ ((reg_e9c & 0x03ff0000) != 0x00420000))
++ result |= 0x01;
++
++ return result;
++}
++
++static int rtl8188eu_rx_iqk_path_a(struct rtl8xxxu_priv *priv)
++{
++ u32 reg_ea4, reg_eac, reg_e94, reg_e9c, val32;
++ int result = 0;
++
++ /* Leave IQK mode */
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00);
++
++ /* Enable path A PA in TX IQK mode */
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf117b);
++
++ /* PA/PAD control by 0x56, and set = 0x0 */
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00980);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x51000);
++
++ /* Enter IQK mode */
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
++
++ /* TX IQK setting */
++ rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
++ rtl8xxxu_write32(priv, REG_RX_IQK, 0x81004800);
++
++ /* path-A IQK setting */
++ rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x10008c1c);
++ rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x30008c1c);
++
++ rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f);
++ rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160000);
++
++ /* LO calibration setting */
++ rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
++
++ /* One shot, path A LOK & IQK */
++ rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
++ rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
++
++ mdelay(10);
++
++ /* Check failed */
++ reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
++ reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
++ reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
++
++ if (!(reg_eac & BIT(28)) &&
++ ((reg_e94 & 0x03ff0000) != 0x01420000) &&
++ ((reg_e9c & 0x03ff0000) != 0x00420000)) {
++ result |= 0x01;
++ } else {
++ /* PA/PAD controlled by 0x0 */
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180);
++ goto out;
++ }
++
++ val32 = 0x80007c00 |
++ (reg_e94 & 0x03ff0000) | ((reg_e9c >> 16) & 0x03ff);
++ rtl8xxxu_write32(priv, REG_TX_IQK, val32);
++
++ /* Modify RX IQK mode table */
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
++
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7ffa);
++
++ /* Enter IQK mode */
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
++
++ /* IQK setting */
++ rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
++
++ /* Path A IQK setting */
++ rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
++ rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c);
++
++ rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c05);
++ rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160c1f);
++
++ /* LO calibration setting */
++ rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
++
++ /* One shot, path A LOK & IQK */
++ rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
++ rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
++
++ mdelay(10);
++
++ reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
++ reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2);
++
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180);
++
++ if (!(reg_eac & BIT(27)) &&
++ ((reg_ea4 & 0x03ff0000) != 0x01320000) &&
++ ((reg_eac & 0x03ff0000) != 0x00360000))
++ result |= 0x02;
++ else
++ dev_warn(&priv->udev->dev, "%s: Path A RX IQK failed!\n",
++ __func__);
++
++out:
++ return result;
++}
++
++static int rtl8188eu_iqk_path_b(struct rtl8xxxu_priv *priv)
++{
++ u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc;
++ int result = 0;
++
++ rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000002);
++ rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000000);
++
++ mdelay(1);
++
++ /* Check failed */
++ reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
++ reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
++ reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
++ reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
++ reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
++
++ if (!(reg_eac & BIT(31)) &&
++ ((reg_eb4 & 0x03ff0000) != 0x01420000) &&
++ ((reg_ebc & 0x03ff0000) != 0x00420000))
++ result |= 0x01;
++ else
++ dev_warn(&priv->udev->dev, "%s: Path B IQK failed!\n",
++ __func__);
++
++ if (!(reg_eac & BIT(30)) &&
++ ((reg_ec4 & 0x03ff0000) != 0x01320000) &&
++ ((reg_ecc & 0x03ff0000) != 0x00360000))
++ result |= 0x01;
++ else
++ dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n",
++ __func__);
++
++ return result;
++}
++
++static void rtl8188eu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
++ int result[][8], int t)
++{
++ struct device *dev = &priv->udev->dev;
++ u32 i, val32;
++ int path_a_ok, path_b_ok;
++ int retry = 2;
++ const u32 adda_regs[RTL8XXXU_ADDA_REGS] = {
++ REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH,
++ REG_RX_WAIT_CCA, REG_TX_CCK_RFON,
++ REG_TX_CCK_BBON, REG_TX_OFDM_RFON,
++ REG_TX_OFDM_BBON, REG_TX_TO_RX,
++ REG_TX_TO_TX, REG_RX_CCK,
++ REG_RX_OFDM, REG_RX_WAIT_RIFS,
++ REG_RX_TO_RX, REG_STANDBY,
++ REG_SLEEP, REG_PMPD_ANAEN
++ };
++ const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = {
++ REG_TXPAUSE, REG_BEACON_CTRL,
++ REG_BEACON_CTRL_1, REG_GPIO_MUXCFG
++ };
++ const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = {
++ REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR,
++ REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B,
++ REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE,
++ REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE
++ };
++
++ /*
++ * Note: IQ calibration must be performed after loading
++ * PHY_REG.txt , and radio_a, radio_b.txt
++ */
++
++ if (t == 0) {
++ /* Save ADDA parameters, turn Path A ADDA on */
++ rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup,
++ RTL8XXXU_ADDA_REGS);
++ rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
++ rtl8xxxu_save_regs(priv, iqk_bb_regs,
++ priv->bb_backup, RTL8XXXU_BB_REGS);
++ }
++
++ rtl8xxxu_path_adda_on(priv, adda_regs, true);
++
++ if (t == 0) {
++ val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM1);
++ if (val32 & FPGA0_HSSI_PARM1_PI)
++ priv->pi_enabled = 1;
++ }
++
++ if (!priv->pi_enabled) {
++ /* Switch BB to PI mode to do IQ Calibration. */
++ rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, 0x01000100);
++ rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, 0x01000100);
++ }
++
++ val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
++ val32 &= ~FPGA_RF_MODE_CCK;
++ rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
++
++ rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600);
++ rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4);
++ rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000);
++
++ if (!priv->no_pape) {
++ val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_SW_CTRL);
++ val32 |= (FPGA0_RF_PAPE |
++ (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT));
++ rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32);
++ }
++
++ val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_RF_INT_OE);
++ val32 &= ~BIT(10);
++ rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, val32);
++ val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE);
++ val32 &= ~BIT(10);
++ rtl8xxxu_write32(priv, REG_FPGA0_XB_RF_INT_OE, val32);
++
++ if (priv->tx_paths > 1) {
++ rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00010000);
++ rtl8xxxu_write32(priv, REG_FPGA0_XB_LSSI_PARM, 0x00010000);
++ }
++
++ /* MAC settings */
++ rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup);
++
++ /* Page B init */
++ rtl8xxxu_write32(priv, REG_CONFIG_ANT_A, 0x0f600000);
++
++ if (priv->tx_paths > 1)
++ rtl8xxxu_write32(priv, REG_CONFIG_ANT_B, 0x0f600000);
++
++ /* IQ calibration setting */
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
++ rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
++ rtl8xxxu_write32(priv, REG_RX_IQK, 0x81004800);
++
++ for (i = 0; i < retry; i++) {
++ path_a_ok = rtl8188eu_iqk_path_a(priv);
++ if (path_a_ok == 0x01) {
++ val32 = rtl8xxxu_read32(priv,
++ REG_TX_POWER_BEFORE_IQK_A);
++ result[t][0] = (val32 >> 16) & 0x3ff;
++ val32 = rtl8xxxu_read32(priv,
++ REG_TX_POWER_AFTER_IQK_A);
++ result[t][1] = (val32 >> 16) & 0x3ff;
++ break;
++ }
++ }
++
++ if (!path_a_ok)
++ dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__);
++
++ for (i = 0; i < retry; i++) {
++ path_a_ok = rtl8188eu_rx_iqk_path_a(priv);
++ if (path_a_ok == 0x03) {
++ val32 = rtl8xxxu_read32(priv,
++ REG_RX_POWER_BEFORE_IQK_A_2);
++ result[t][2] = (val32 >> 16) & 0x3ff;
++ val32 = rtl8xxxu_read32(priv,
++ REG_RX_POWER_AFTER_IQK_A_2);
++ result[t][3] = (val32 >> 16) & 0x3ff;
++
++ break;
++ }
++ }
++
++ if (!path_a_ok)
++ dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__);
++
++ /*
++ * Path B calibration code in the vendor driver seems to be
++ * old style and not updated for the 8188eu since it's a 1T1R
++ * part. Keeping the code here in sync with the vendor code
++ * to not divert unncessarily, but probably would be good to
++ * look into modernizing all the code including that for the
++ * old gen1 devices
++ */
++ if (priv->tx_paths > 1) {
++ /*
++ * Path A into standby
++ */
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x0);
++ rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00010000);
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
++
++ /* Turn Path B ADDA on */
++ rtl8xxxu_path_adda_on(priv, adda_regs, false);
++
++ for (i = 0; i < retry; i++) {
++ path_b_ok = rtl8188eu_iqk_path_b(priv);
++ if (path_b_ok == 0x03) {
++ val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
++ result[t][4] = (val32 >> 16) & 0x3ff;
++ val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
++ result[t][5] = (val32 >> 16) & 0x3ff;
++ val32 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
++ result[t][6] = (val32 >> 16) & 0x3ff;
++ val32 = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
++ result[t][7] = (val32 >> 16) & 0x3ff;
++ break;
++ } else if (i == (retry - 1) && path_b_ok == 0x01) {
++ /* TX IQK OK */
++ val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
++ result[t][4] = (val32 >> 16) & 0x3ff;
++ val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
++ result[t][5] = (val32 >> 16) & 0x3ff;
++ }
++ }
++
++ if (!path_b_ok)
++ dev_dbg(dev, "%s: Path B IQK failed!\n", __func__);
++ }
++
++ /* Back to BB mode, load original value */
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0);
++
++ if (t) {
++ if (!priv->pi_enabled) {
++ /*
++ * Switch back BB to SI mode after finishing
++ * IQ Calibration
++ */
++ val32 = 0x01000000;
++ rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, val32);
++ rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, val32);
++ }
++
++ /* Reload ADDA power saving parameters */
++ rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup,
++ RTL8XXXU_ADDA_REGS);
++
++ /* Reload MAC parameters */
++ rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
++
++ /* Reload BB parameters */
++ rtl8xxxu_restore_regs(priv, iqk_bb_regs,
++ priv->bb_backup, RTL8XXXU_BB_REGS);
++
++ /* Restore RX initial gain */
++ rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00032ed3);
++
++ if (priv->tx_paths > 1) {
++ rtl8xxxu_write32(priv, REG_FPGA0_XB_LSSI_PARM,
++ 0x00032ed3);
++ }
++
++ /* Load 0xe30 IQC default value */
++ rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00);
++ rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00);
++ }
++}
++
++static void rtl8188eu_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
++{
++ struct device *dev = &priv->udev->dev;
++ int result[4][8]; /* last is final result */
++ int i, candidate;
++ bool path_a_ok, path_b_ok;
++ u32 reg_e94, reg_e9c, reg_ea4, reg_eac;
++ u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc;
++ bool simu;
++
++ memset(result, 0, sizeof(result));
++ result[3][0] = 0x100;
++ result[3][2] = 0x100;
++ result[3][4] = 0x100;
++ result[3][6] = 0x100;
++
++ candidate = -1;
++
++ path_a_ok = false;
++ path_b_ok = false;
++
++ for (i = 0; i < 3; i++) {
++ rtl8188eu_phy_iqcalibrate(priv, result, i);
++
++ if (i == 1) {
++ simu = rtl8xxxu_gen2_simularity_compare(priv,
++ result, 0, 1);
++ if (simu) {
++ candidate = 0;
++ break;
++ }
++ }
++
++ if (i == 2) {
++ simu = rtl8xxxu_gen2_simularity_compare(priv,
++ result, 0, 2);
++ if (simu) {
++ candidate = 0;
++ break;
++ }
++
++ simu = rtl8xxxu_gen2_simularity_compare(priv,
++ result, 1, 2);
++ if (simu)
++ candidate = 1;
++ else
++ candidate = 3;
++ }
++ }
++
++ for (i = 0; i < 4; i++) {
++ reg_e94 = result[i][0];
++ reg_e9c = result[i][1];
++ reg_ea4 = result[i][2];
++ reg_eb4 = result[i][4];
++ reg_ebc = result[i][5];
++ reg_ec4 = result[i][6];
++ }
++
++ if (candidate >= 0) {
++ reg_e94 = result[candidate][0];
++ priv->rege94 = reg_e94;
++ reg_e9c = result[candidate][1];
++ priv->rege9c = reg_e9c;
++ reg_ea4 = result[candidate][2];
++ reg_eac = result[candidate][3];
++ reg_eb4 = result[candidate][4];
++ priv->regeb4 = reg_eb4;
++ reg_ebc = result[candidate][5];
++ priv->regebc = reg_ebc;
++ reg_ec4 = result[candidate][6];
++ reg_ecc = result[candidate][7];
++ dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
++ dev_dbg(dev,
++ "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x "
++ "ecc=%x\n ", __func__, reg_e94, reg_e9c,
++ reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc);
++ path_a_ok = true;
++ path_b_ok = true;
++ } else {
++ reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100;
++ reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0;
++ }
++
++ if (reg_e94 && candidate >= 0)
++ rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result,
++ candidate, (reg_ea4 == 0));
++
++ if (priv->rf_paths > 1 && reg_eb4)
++ rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result,
++ candidate, (reg_ec4 == 0));
++
++ rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg,
++ priv->bb_recovery_backup, RTL8XXXU_BB_REGS);
++}
++
+ static void rtl8188e_disabled_to_emu(struct rtl8xxxu_priv *priv)
+ {
+ u16 val16;
+@@ -520,6 +1008,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .llt_init = rtl8xxxu_auto_llt_table,
+ .init_phy_bb = rtl8188eu_init_phy_bb,
+ .init_phy_rf = rtl8188eu_init_phy_rf,
++ .phy_iq_calibrate = rtl8188eu_phy_iq_calibrate,
+ .parse_rx_desc = rtl8xxxu_parse_rxdesc16,
+ .usb_quirks = rtl8188e_usb_quirks,
+ .writeN_block_size = 128,
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 04:00:51 +0000