diff options
Diffstat (limited to 'package/kernel/mac80211/patches/344-0017-brcmfmac-switch-to-new-platform-data.patch')
| -rw-r--r-- | package/kernel/mac80211/patches/344-0017-brcmfmac-switch-to-new-platform-data.patch | 734 |
1 files changed, 734 insertions, 0 deletions
diff --git a/package/kernel/mac80211/patches/344-0017-brcmfmac-switch-to-new-platform-data.patch b/package/kernel/mac80211/patches/344-0017-brcmfmac-switch-to-new-platform-data.patch new file mode 100644 index 0000000000..37b68552cc --- /dev/null +++ b/package/kernel/mac80211/patches/344-0017-brcmfmac-switch-to-new-platform-data.patch @@ -0,0 +1,734 @@ +From: Hante Meuleman <meuleman@broadcom.com> +Date: Wed, 17 Feb 2016 11:27:07 +0100 +Subject: [PATCH] brcmfmac: switch to new platform data + +Platform data is only available for sdio. With this patch a new +platform data structure is being used which allows for platform +data for any device and configurable per device. This patch only +switches to the new structure and adds support for SDIO devices. + +Reviewed-by: Arend Van Spriel <arend@broadcom.com> +Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> +Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> +Signed-off-by: Hante Meuleman <meuleman@broadcom.com> +Signed-off-by: Arend van Spriel <arend@broadcom.com> +Signed-off-by: Kalle Valo <kvalo@codeaurora.org> +--- + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c +@@ -103,7 +103,7 @@ static void brcmf_sdiod_dummy_irqhandler + + int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev) + { +- struct brcmfmac_sdio_platform_data *pdata; ++ struct brcmfmac_sdio_pd *pdata; + int ret = 0; + u8 data; + u32 addr, gpiocontrol; +@@ -173,7 +173,7 @@ int brcmf_sdiod_intr_register(struct brc + + int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev) + { +- struct brcmfmac_sdio_platform_data *pdata; ++ struct brcmfmac_sdio_pd *pdata; + + brcmf_dbg(SDIO, "Entering\n"); + +@@ -1164,17 +1164,6 @@ static int brcmf_ops_sdio_probe(struct s + dev_set_drvdata(&func->dev, bus_if); + dev_set_drvdata(&sdiodev->func[1]->dev, bus_if); + sdiodev->dev = &sdiodev->func[1]->dev; +- sdiodev->pdata = brcmf_get_module_param(sdiodev->dev); +- +-#ifdef CONFIG_PM_SLEEP +- /* wowl can be supported when KEEP_POWER is true and (WAKE_SDIO_IRQ +- * is true or when platform data OOB irq is true). +- */ +- if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) && +- ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) || +- (sdiodev->pdata && sdiodev->pdata->oob_irq_supported))) +- bus_if->wowl_supported = true; +-#endif + + brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_DOWN); + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +@@ -6459,8 +6459,8 @@ int brcmf_cfg80211_wait_vif_event(struct + static s32 brcmf_translate_country_code(struct brcmf_pub *drvr, char alpha2[2], + struct brcmf_fil_country_le *ccreq) + { +- struct cc_translate *country_codes; +- struct cc_entry *cc; ++ struct brcmfmac_pd_cc *country_codes; ++ struct brcmfmac_pd_cc_entry *cc; + s32 found_index; + int i; + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c +@@ -80,7 +80,7 @@ module_param_named(ignore_probe_fail, br + MODULE_PARM_DESC(ignore_probe_fail, "always succeed probe for debugging"); + #endif + +-static struct brcmfmac_sdio_platform_data *brcmfmac_pdata; ++static struct brcmfmac_platform_data *brcmfmac_pdata; + struct brcmf_mp_global_t brcmf_mp_global; + + int brcmf_c_preinit_dcmds(struct brcmf_if *ifp) +@@ -229,15 +229,46 @@ void __brcmf_dbg(u32 level, const char * + + static void brcmf_mp_attach(void) + { ++ /* If module param firmware path is set then this will always be used, ++ * if not set then if available use the platform data version. To make ++ * sure it gets initialized at all, always copy the module param version ++ */ + strlcpy(brcmf_mp_global.firmware_path, brcmf_firmware_path, + BRCMF_FW_ALTPATH_LEN); ++ if ((brcmfmac_pdata) && (brcmfmac_pdata->fw_alternative_path) && ++ (brcmf_mp_global.firmware_path[0] == '\0')) { ++ strlcpy(brcmf_mp_global.firmware_path, ++ brcmfmac_pdata->fw_alternative_path, ++ BRCMF_FW_ALTPATH_LEN); ++ } + } + +-struct brcmfmac_sdio_platform_data *brcmf_get_module_param(struct device *dev) +-{ +- if (!brcmfmac_pdata) +- brcmf_of_probe(dev, &brcmfmac_pdata); +- return brcmfmac_pdata; ++struct brcmfmac_sdio_pd *brcmf_get_module_param(struct device *dev, ++ enum brcmf_bus_type bus_type, ++ u32 chip, u32 chiprev) ++{ ++ struct brcmfmac_sdio_pd *pdata; ++ struct brcmfmac_pd_device *device_pd; ++ int i; ++ ++ if (brcmfmac_pdata) { ++ for (i = 0; i < brcmfmac_pdata->device_count; i++) { ++ device_pd = &brcmfmac_pdata->devices[i]; ++ if ((device_pd->bus_type == bus_type) && ++ (device_pd->id == chip) && ++ ((device_pd->rev == chiprev) || ++ (device_pd->rev == -1))) { ++ brcmf_dbg(INFO, "Platform data for device found\n"); ++ if (device_pd->bus_type == BRCMF_BUSTYPE_SDIO) ++ return &device_pd->bus.sdio; ++ break; ++ } ++ } ++ } ++ pdata = NULL; ++ brcmf_of_probe(dev, &pdata); ++ ++ return pdata; + } + + int brcmf_mp_device_attach(struct brcmf_pub *drvr) +@@ -287,7 +318,7 @@ static int brcmf_common_pd_remove(struct + static struct platform_driver brcmf_pd = { + .remove = brcmf_common_pd_remove, + .driver = { +- .name = BRCMFMAC_SDIO_PDATA_NAME, ++ .name = BRCMFMAC_PDATA_NAME, + } + }; + +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h +@@ -16,7 +16,7 @@ + #define BRCMFMAC_COMMON_H + + #include <linux/platform_device.h> +-#include <linux/platform_data/brcmfmac-sdio.h> ++#include <linux/platform_data/brcmfmac.h> + #include "fwil_types.h" + + extern const u8 ALLFFMAC[ETH_ALEN]; +@@ -43,33 +43,6 @@ struct brcmf_mp_global_t { + extern struct brcmf_mp_global_t brcmf_mp_global; + + /** +- * struct cc_entry - Struct for translating user space country code (iso3166) to +- * firmware country code and revision. +- * +- * @iso3166: iso3166 alpha 2 country code string. +- * @cc: firmware country code string. +- * @rev: firmware country code revision. +- */ +-struct cc_entry { +- char iso3166[BRCMF_COUNTRY_BUF_SZ]; +- char cc[BRCMF_COUNTRY_BUF_SZ]; +- s32 rev; +-}; +- +-/** +- * struct cc_translate - Struct for translating country codes as set by user +- * space to a country code and rev which can be used by +- * firmware. +- * +- * @table_size: number of entries in table (> 0) +- * @table: dynamic array of 1 or more elements with translation information. +- */ +-struct cc_translate { +- int table_size; +- struct cc_entry table[0]; +-}; +- +-/** + * struct brcmf_mp_device - Device module paramaters. + * + * @sdiod_txglomsz: SDIO txglom size. +@@ -88,10 +61,12 @@ struct brcmf_mp_device { + int fcmode; + bool roamoff; + bool ignore_probe_fail; +- struct cc_translate *country_codes; ++ struct brcmfmac_pd_cc *country_codes; + }; + +-struct brcmfmac_sdio_platform_data *brcmf_get_module_param(struct device *dev); ++struct brcmfmac_sdio_pd *brcmf_get_module_param(struct device *dev, ++ enum brcmf_bus_type bus_type, ++ u32 chip, u32 chiprev); + int brcmf_mp_device_attach(struct brcmf_pub *drvr); + void brcmf_mp_device_detach(struct brcmf_pub *drvr); + #ifdef DEBUG +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c +@@ -23,8 +23,7 @@ + #include "common.h" + #include "of.h" + +-void +-brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_platform_data **sdio) ++void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio) + { + struct device_node *np = dev->of_node; + int irq; +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h +@@ -15,10 +15,9 @@ + */ + #ifdef CONFIG_OF + void +-brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_platform_data **sdio); ++brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio); + #else +-static void brcmf_of_probe(struct device *dev, +- struct brcmfmac_sdio_platform_data **sdio) ++static void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio) + { + } + #endif /* CONFIG_OF */ +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +@@ -33,8 +33,6 @@ + #include <linux/bcma/bcma.h> + #include <linux/debugfs.h> + #include <linux/vmalloc.h> +-#include <linux/platform_data/brcmfmac-sdio.h> +-#include <linux/moduleparam.h> + #include <asm/unaligned.h> + #include <defs.h> + #include <brcmu_wifi.h> +@@ -44,6 +42,8 @@ + #include "sdio.h" + #include "chip.h" + #include "firmware.h" ++#include "core.h" ++#include "common.h" + + #define DCMD_RESP_TIMEOUT msecs_to_jiffies(2500) + #define CTL_DONE_TIMEOUT msecs_to_jiffies(2500) +@@ -3775,26 +3775,28 @@ static const struct brcmf_buscore_ops br + static bool + brcmf_sdio_probe_attach(struct brcmf_sdio *bus) + { ++ struct brcmf_sdio_dev *sdiodev; + u8 clkctl = 0; + int err = 0; + int reg_addr; + u32 reg_val; + u32 drivestrength; + +- sdio_claim_host(bus->sdiodev->func[1]); ++ sdiodev = bus->sdiodev; ++ sdio_claim_host(sdiodev->func[1]); + + pr_debug("F1 signature read @0x18000000=0x%4x\n", +- brcmf_sdiod_regrl(bus->sdiodev, SI_ENUM_BASE, NULL)); ++ brcmf_sdiod_regrl(sdiodev, SI_ENUM_BASE, NULL)); + + /* + * Force PLL off until brcmf_chip_attach() + * programs PLL control regs + */ + +- brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, ++ brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + BRCMF_INIT_CLKCTL1, &err); + if (!err) +- clkctl = brcmf_sdiod_regrb(bus->sdiodev, ++ clkctl = brcmf_sdiod_regrb(sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); + + if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) { +@@ -3803,50 +3805,77 @@ brcmf_sdio_probe_attach(struct brcmf_sdi + goto fail; + } + +- bus->ci = brcmf_chip_attach(bus->sdiodev, &brcmf_sdio_buscore_ops); ++ bus->ci = brcmf_chip_attach(sdiodev, &brcmf_sdio_buscore_ops); + if (IS_ERR(bus->ci)) { + brcmf_err("brcmf_chip_attach failed!\n"); + bus->ci = NULL; + goto fail; + } ++ sdiodev->pdata = brcmf_get_module_param(sdiodev->dev, ++ BRCMF_BUSTYPE_SDIO, ++ bus->ci->chip, ++ bus->ci->chiprev); ++ /* platform specific configuration: ++ * alignments must be at least 4 bytes for ADMA ++ */ ++ bus->head_align = ALIGNMENT; ++ bus->sgentry_align = ALIGNMENT; ++ if (sdiodev->pdata) { ++ if (sdiodev->pdata->sd_head_align > ALIGNMENT) ++ bus->head_align = sdiodev->pdata->sd_head_align; ++ if (sdiodev->pdata->sd_sgentry_align > ALIGNMENT) ++ bus->sgentry_align = sdiodev->pdata->sd_sgentry_align; ++ } ++ /* allocate scatter-gather table. sg support ++ * will be disabled upon allocation failure. ++ */ ++ brcmf_sdiod_sgtable_alloc(sdiodev); ++ ++#ifdef CONFIG_PM_SLEEP ++ /* wowl can be supported when KEEP_POWER is true and (WAKE_SDIO_IRQ ++ * is true or when platform data OOB irq is true). ++ */ ++ if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) && ++ ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) || ++ (sdiodev->pdata && sdiodev->pdata->oob_irq_supported))) ++ sdiodev->bus_if->wowl_supported = true; ++#endif + + if (brcmf_sdio_kso_init(bus)) { + brcmf_err("error enabling KSO\n"); + goto fail; + } + +- if ((bus->sdiodev->pdata) && (bus->sdiodev->pdata->drive_strength)) +- drivestrength = bus->sdiodev->pdata->drive_strength; ++ if ((sdiodev->pdata) && (sdiodev->pdata->drive_strength)) ++ drivestrength = sdiodev->pdata->drive_strength; + else + drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH; +- brcmf_sdio_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength); ++ brcmf_sdio_drivestrengthinit(sdiodev, bus->ci, drivestrength); + + /* Set card control so an SDIO card reset does a WLAN backplane reset */ +- reg_val = brcmf_sdiod_regrb(bus->sdiodev, +- SDIO_CCCR_BRCM_CARDCTRL, &err); ++ reg_val = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, &err); + if (err) + goto fail; + + reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET; + +- brcmf_sdiod_regwb(bus->sdiodev, +- SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err); ++ brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err); + if (err) + goto fail; + + /* set PMUControl so a backplane reset does PMU state reload */ + reg_addr = CORE_CC_REG(brcmf_chip_get_pmu(bus->ci)->base, pmucontrol); +- reg_val = brcmf_sdiod_regrl(bus->sdiodev, reg_addr, &err); ++ reg_val = brcmf_sdiod_regrl(sdiodev, reg_addr, &err); + if (err) + goto fail; + + reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT); + +- brcmf_sdiod_regwl(bus->sdiodev, reg_addr, reg_val, &err); ++ brcmf_sdiod_regwl(sdiodev, reg_addr, reg_val, &err); + if (err) + goto fail; + +- sdio_release_host(bus->sdiodev->func[1]); ++ sdio_release_host(sdiodev->func[1]); + + brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN); + +@@ -3867,7 +3896,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdi + return true; + + fail: +- sdio_release_host(bus->sdiodev->func[1]); ++ sdio_release_host(sdiodev->func[1]); + return false; + } + +@@ -4045,18 +4074,6 @@ struct brcmf_sdio *brcmf_sdio_probe(stru + bus->txminmax = BRCMF_TXMINMAX; + bus->tx_seq = SDPCM_SEQ_WRAP - 1; + +- /* platform specific configuration: +- * alignments must be at least 4 bytes for ADMA +- */ +- bus->head_align = ALIGNMENT; +- bus->sgentry_align = ALIGNMENT; +- if (sdiodev->pdata) { +- if (sdiodev->pdata->sd_head_align > ALIGNMENT) +- bus->head_align = sdiodev->pdata->sd_head_align; +- if (sdiodev->pdata->sd_sgentry_align > ALIGNMENT) +- bus->sgentry_align = sdiodev->pdata->sd_sgentry_align; +- } +- + /* single-threaded workqueue */ + wq = alloc_ordered_workqueue("brcmf_wq/%s", WQ_MEM_RECLAIM, + dev_name(&sdiodev->func[1]->dev)); +--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h ++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h +@@ -184,7 +184,7 @@ struct brcmf_sdio_dev { + struct brcmf_sdio *bus; + struct device *dev; + struct brcmf_bus *bus_if; +- struct brcmfmac_sdio_platform_data *pdata; ++ struct brcmfmac_sdio_pd *pdata; + bool oob_irq_requested; + bool irq_en; /* irq enable flags */ + spinlock_t irq_en_lock; +--- a/include/linux/platform_data/brcmfmac-sdio.h ++++ /dev/null +@@ -1,135 +0,0 @@ +-/* +- * Copyright (c) 2013 Broadcom Corporation +- * +- * Permission to use, copy, modify, and/or distribute this software for any +- * purpose with or without fee is hereby granted, provided that the above +- * copyright notice and this permission notice appear in all copies. +- * +- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES +- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY +- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION +- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN +- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +- */ +- +-#ifndef _LINUX_BRCMFMAC_PLATFORM_H +-#define _LINUX_BRCMFMAC_PLATFORM_H +- +-/* +- * Platform specific driver functions and data. Through the platform specific +- * device data functions can be provided to help the brcmfmac driver to +- * operate with the device in combination with the used platform. +- * +- * Use the platform data in the following (similar) way: +- * +- * +-#include <brcmfmac_platform.h> +- +- +-static void brcmfmac_power_on(void) +-{ +-} +- +-static void brcmfmac_power_off(void) +-{ +-} +- +-static void brcmfmac_reset(void) +-{ +-} +- +-static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = { +- .power_on = brcmfmac_power_on, +- .power_off = brcmfmac_power_off, +- .reset = brcmfmac_reset +-}; +- +-static struct platform_device brcmfmac_device = { +- .name = BRCMFMAC_SDIO_PDATA_NAME, +- .id = PLATFORM_DEVID_NONE, +- .dev.platform_data = &brcmfmac_sdio_pdata +-}; +- +-void __init brcmfmac_init_pdata(void) +-{ +- brcmfmac_sdio_pdata.oob_irq_supported = true; +- brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB); +- brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ | +- IORESOURCE_IRQ_HIGHLEVEL; +- platform_device_register(&brcmfmac_device); +-} +- * +- * +- * Note: the brcmfmac can be loaded as module or be statically built-in into +- * the kernel. If built-in then do note that it uses module_init (and +- * module_exit) routines which equal device_initcall. So if you intend to +- * create a module with the platform specific data for the brcmfmac and have +- * it built-in to the kernel then use a higher initcall then device_initcall +- * (see init.h). If this is not done then brcmfmac will load without problems +- * but will not pickup the platform data. +- * +- * When the driver does not "detect" platform driver data then it will continue +- * without reporting anything and just assume there is no data needed. Which is +- * probably true for most platforms. +- * +- * Explanation of the platform_data fields: +- * +- * drive_strength: is the preferred drive_strength to be used for the SDIO +- * pins. If 0 then a default value will be used. This is the target drive +- * strength, the exact drive strength which will be used depends on the +- * capabilities of the device. +- * +- * oob_irq_supported: does the board have support for OOB interrupts. SDIO +- * in-band interrupts are relatively slow and for having less overhead on +- * interrupt processing an out of band interrupt can be used. If the HW +- * supports this then enable this by setting this field to true and configure +- * the oob related fields. +- * +- * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are +- * used for registering the irq using request_irq function. +- * +- * broken_sg_support: flag for broken sg list support of SDIO host controller. +- * Set this to true if the SDIO host controller has higher align requirement +- * than 32 bytes for each scatterlist item. +- * +- * sd_head_align: alignment requirement for start of data buffer +- * +- * sd_sgentry_align: length alignment requirement for each sg entry +- * +- * power_on: This function is called by the brcmfmac when the module gets +- * loaded. This can be particularly useful for low power devices. The platform +- * spcific routine may for example decide to power up the complete device. +- * If there is no use-case for this function then provide NULL. +- * +- * power_off: This function is called by the brcmfmac when the module gets +- * unloaded. At this point the device can be powered down or otherwise be reset. +- * So if an actual power_off is not supported but reset is then reset the device +- * when this function gets called. This can be particularly useful for low power +- * devices. If there is no use-case for this function (either power-down or +- * reset) then provide NULL. +- * +- * reset: This function can get called if the device communication broke down. +- * This functionality is particularly useful in case of SDIO type devices. It is +- * possible to reset a dongle via sdio data interface, but it requires that +- * this is fully functional. This function is chip/module specific and this +- * function should return only after the complete reset has completed. +- */ +- +-#define BRCMFMAC_SDIO_PDATA_NAME "brcmfmac_sdio" +- +-struct brcmfmac_sdio_platform_data { +- unsigned int drive_strength; +- bool oob_irq_supported; +- unsigned int oob_irq_nr; +- unsigned long oob_irq_flags; +- bool broken_sg_support; +- unsigned short sd_head_align; +- unsigned short sd_sgentry_align; +- void (*power_on)(void); +- void (*power_off)(void); +- void (*reset)(void); +-}; +- +-#endif /* _LINUX_BRCMFMAC_PLATFORM_H */ +--- /dev/null ++++ b/include/linux/platform_data/brcmfmac.h +@@ -0,0 +1,185 @@ ++/* ++ * Copyright (c) 201 Broadcom Corporation ++ * ++ * Permission to use, copy, modify, and/or distribute this software for any ++ * purpose with or without fee is hereby granted, provided that the above ++ * copyright notice and this permission notice appear in all copies. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY ++ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION ++ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN ++ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ++ */ ++ ++#ifndef _LINUX_BRCMFMAC_PLATFORM_H ++#define _LINUX_BRCMFMAC_PLATFORM_H ++ ++ ++#define BRCMFMAC_PDATA_NAME "brcmfmac" ++ ++#define BRCMFMAC_COUNTRY_BUF_SZ 4 ++ ++ ++/* ++ * Platform specific driver functions and data. Through the platform specific ++ * device data functions and data can be provided to help the brcmfmac driver to ++ * operate with the device in combination with the used platform. ++ */ ++ ++ ++/** ++ * Note: the brcmfmac can be loaded as module or be statically built-in into ++ * the kernel. If built-in then do note that it uses module_init (and ++ * module_exit) routines which equal device_initcall. So if you intend to ++ * create a module with the platform specific data for the brcmfmac and have ++ * it built-in to the kernel then use a higher initcall then device_initcall ++ * (see init.h). If this is not done then brcmfmac will load without problems ++ * but will not pickup the platform data. ++ * ++ * When the driver does not "detect" platform driver data then it will continue ++ * without reporting anything and just assume there is no data needed. Which is ++ * probably true for most platforms. ++ */ ++ ++/** ++ * enum brcmf_bus_type - Bus type identifier. Currently SDIO, USB and PCIE are ++ * supported. ++ */ ++enum brcmf_bus_type { ++ BRCMF_BUSTYPE_SDIO, ++ BRCMF_BUSTYPE_USB, ++ BRCMF_BUSTYPE_PCIE ++}; ++ ++ ++/** ++ * struct brcmfmac_sdio_pd - SDIO Device specific platform data. ++ * ++ * @txglomsz: SDIO txglom size. Use 0 if default of driver is to be ++ * used. ++ * @drive_strength: is the preferred drive_strength to be used for the SDIO ++ * pins. If 0 then a default value will be used. This is ++ * the target drive strength, the exact drive strength ++ * which will be used depends on the capabilities of the ++ * device. ++ * @oob_irq_supported: does the board have support for OOB interrupts. SDIO ++ * in-band interrupts are relatively slow and for having ++ * less overhead on interrupt processing an out of band ++ * interrupt can be used. If the HW supports this then ++ * enable this by setting this field to true and configure ++ * the oob related fields. ++ * @oob_irq_nr, ++ * @oob_irq_flags: the OOB interrupt information. The values are used for ++ * registering the irq using request_irq function. ++ * @broken_sg_support: flag for broken sg list support of SDIO host controller. ++ * Set this to true if the SDIO host controller has higher ++ * align requirement than 32 bytes for each scatterlist ++ * item. ++ * @sd_head_align: alignment requirement for start of data buffer. ++ * @sd_sgentry_align: length alignment requirement for each sg entry. ++ * @reset: This function can get called if the device communication ++ * broke down. This functionality is particularly useful in ++ * case of SDIO type devices. It is possible to reset a ++ * dongle via sdio data interface, but it requires that ++ * this is fully functional. This function is chip/module ++ * specific and this function should return only after the ++ * complete reset has completed. ++ */ ++struct brcmfmac_sdio_pd { ++ int txglomsz; ++ unsigned int drive_strength; ++ bool oob_irq_supported; ++ unsigned int oob_irq_nr; ++ unsigned long oob_irq_flags; ++ bool broken_sg_support; ++ unsigned short sd_head_align; ++ unsigned short sd_sgentry_align; ++ void (*reset)(void); ++}; ++ ++/** ++ * struct brcmfmac_pd_cc_entry - Struct for translating user space country code ++ * (iso3166) to firmware country code and ++ * revision. ++ * ++ * @iso3166: iso3166 alpha 2 country code string. ++ * @cc: firmware country code string. ++ * @rev: firmware country code revision. ++ */ ++struct brcmfmac_pd_cc_entry { ++ char iso3166[BRCMFMAC_COUNTRY_BUF_SZ]; ++ char cc[BRCMFMAC_COUNTRY_BUF_SZ]; ++ s32 rev; ++}; ++ ++/** ++ * struct brcmfmac_pd_cc - Struct for translating country codes as set by user ++ * space to a country code and rev which can be used by ++ * firmware. ++ * ++ * @table_size: number of entries in table (> 0) ++ * @table: array of 1 or more elements with translation information. ++ */ ++struct brcmfmac_pd_cc { ++ int table_size; ++ struct brcmfmac_pd_cc_entry table[0]; ++}; ++ ++/** ++ * struct brcmfmac_pd_device - Device specific platform data. (id/rev/bus_type) ++ * is the unique identifier of the device. ++ * ++ * @id: ID of the device for which this data is. In case of SDIO ++ * or PCIE this is the chipid as identified by chip.c In ++ * case of USB this is the chipid as identified by the ++ * device query. ++ * @rev: chip revision, see id. ++ * @bus_type: The type of bus. Some chipid/rev exist for different bus ++ * types. Each bus type has its own set of settings. ++ * @feature_disable: Bitmask of features to disable (override), See feature.c ++ * in brcmfmac for details. ++ * @country_codes: If available, pointer to struct for translating country ++ * codes. ++ * @bus: Bus specific (union) device settings. Currently only ++ * SDIO. ++ */ ++struct brcmfmac_pd_device { ++ unsigned int id; ++ unsigned int rev; ++ enum brcmf_bus_type bus_type; ++ unsigned int feature_disable; ++ struct brcmfmac_pd_cc *country_codes; ++ union { ++ struct brcmfmac_sdio_pd sdio; ++ } bus; ++}; ++ ++/** ++ * struct brcmfmac_platform_data - BRCMFMAC specific platform data. ++ * ++ * @power_on: This function is called by the brcmfmac driver when the module ++ * gets loaded. This can be particularly useful for low power ++ * devices. The platform spcific routine may for example decide to ++ * power up the complete device. If there is no use-case for this ++ * function then provide NULL. ++ * @power_off: This function is called by the brcmfmac when the module gets ++ * unloaded. At this point the devices can be powered down or ++ * otherwise be reset. So if an actual power_off is not supported ++ * but reset is supported by the devices then reset the devices ++ * when this function gets called. This can be particularly useful ++ * for low power devices. If there is no use-case for this ++ * function then provide NULL. ++ */ ++struct brcmfmac_platform_data { ++ void (*power_on)(void); ++ void (*power_off)(void); ++ char *fw_alternative_path; ++ int device_count; ++ struct brcmfmac_pd_device devices[0]; ++}; ++ ++ ++#endif /* _LINUX_BRCMFMAC_PLATFORM_H */ |