1 files changed, 0 insertions, 111 deletions
diff --git a/package/kernel/mac80211/patches/081-ath10k-calibration-variant.patch b/package/kernel/mac80211/patches/081-ath10k-calibration-variant.patch
deleted file mode 100644
index 2724027866..0000000000
--- a/package/kernel/mac80211/patches/081-ath10k-calibration-variant.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-From d06f26c5c8a41f246a9c40862a77a55725cedbd3 Mon Sep 17 00:00:00 2001
-From: Sven Eckelmann <sven.eckelmann@openmesh.com>
-Date: Fri, 8 Dec 2017 11:37:42 +0100
-Subject: ath10k: search DT for qcom,ath10k-calibration-variant
-
-Board Data File (BDF) is loaded upon driver boot-up procedure. The right
-board data file is identified on QCA4019 using bus, bmi-chip-id and
-bmi-board-id.
-
-The problem, however, can occur when the (default) board data file cannot
-fulfill with the vendor requirements and it is necessary to use a different
-board data file.
-
-This problem was solved for SMBIOS by adding a special SMBIOS type 0xF8.
-Something similar has to be provided for systems without SMBIOS but with
-device trees. No solution was specified by QCA and therefore a new one has
-to be found for ath10k.
-
-The device tree requires addition strings to define the variant name
-
-    wifi@a000000 {
-    	status = "okay";
-    	qcom,ath10k-calibration-variant = "RT-AC58U";
-    };
-
-    wifi@a800000 {
-    	status = "okay";
-    	qcom,ath10k-calibration-variant = "RT-AC58U";
-    };
-
-This would create the boarddata identifiers for the board-2.bin search
-
- *  bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=RT-AC58U
- *  bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=RT-AC58U
-
-Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
-Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
----
- drivers/net/wireless/ath/ath10k/core.c | 40 ++++++++++++++++++++++++++++------
- 1 file changed, 33 insertions(+), 7 deletions(-)
-
---- a/drivers/net/wireless/ath/ath10k/core.c
-+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -860,6 +860,28 @@ static int ath10k_core_check_smbios(stru
- 	return 0;
- }
- 
-+static int ath10k_core_check_dt(struct ath10k *ar)
-+{
-+	struct device_node *node;
-+	const char *variant = NULL;
-+
-+	node = ar->dev->of_node;
-+	if (!node)
-+		return -ENOENT;
-+
-+	of_property_read_string(node, "qcom,ath10k-calibration-variant",
-+				&variant);
-+	if (!variant)
-+		return -ENODATA;
-+
-+	if (strscpy(ar->id.bdf_ext, variant, sizeof(ar->id.bdf_ext)) < 0)
-+		ath10k_dbg(ar, ATH10K_DBG_BOOT,
-+			   "bdf variant string is longer than the buffer can accommodate (variant: %s)\n",
-+			    variant);
-+
-+	return 0;
-+}
-+
- static int ath10k_download_and_run_otp(struct ath10k *ar)
- {
- 	u32 result, address = ar->hw_params.patch_load_addr;
-@@ -1231,19 +1253,19 @@ static int ath10k_core_create_board_name
- 	/* strlen(',variant=') + strlen(ar->id.bdf_ext) */
- 	char variant[9 + ATH10K_SMBIOS_BDF_EXT_STR_LENGTH] = { 0 };
- 
-+	if (ar->id.bdf_ext[0] != '\0')
-+		scnprintf(variant, sizeof(variant), ",variant=%s",
-+			  ar->id.bdf_ext);
-+
- 	if (ar->id.bmi_ids_valid) {
- 		scnprintf(name, name_len,
--			  "bus=%s,bmi-chip-id=%d,bmi-board-id=%d",
-+			  "bus=%s,bmi-chip-id=%d,bmi-board-id=%d%s",
- 			  ath10k_bus_str(ar->hif.bus),
- 			  ar->id.bmi_chip_id,
--			  ar->id.bmi_board_id);
-+			  ar->id.bmi_board_id, variant);
- 		goto out;
- 	}
- 
--	if (ar->id.bdf_ext[0] != '\0')
--		scnprintf(variant, sizeof(variant), ",variant=%s",
--			  ar->id.bdf_ext);
--
- 	scnprintf(name, name_len,
- 		  "bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x%s",
- 		  ath10k_bus_str(ar->hif.bus),
-@@ -2343,7 +2365,11 @@ static int ath10k_core_probe_fw(struct a
- 
- 	ret = ath10k_core_check_smbios(ar);
- 	if (ret)
--		ath10k_dbg(ar, ATH10K_DBG_BOOT, "bdf variant name not set.\n");
-+		ath10k_dbg(ar, ATH10K_DBG_BOOT, "SMBIOS bdf variant name not set.\n");
-+
-+	ret = ath10k_core_check_dt(ar);
-+	if (ret)
-+		ath10k_dbg(ar, ATH10K_DBG_BOOT, "DT bdf variant name not set.\n");
- 
- 	ret = ath10k_core_fetch_board_file(ar);
- 	if (ret) {