diff options
Diffstat (limited to 'package/kernel/mac80211/Makefile')
| -rw-r--r-- | package/kernel/mac80211/Makefile | 486 |
1 files changed, 2 insertions, 484 deletions
diff --git a/package/kernel/mac80211/Makefile b/package/kernel/mac80211/Makefile index a9cadda2bd..cdcaf14599 100644 --- a/package/kernel/mac80211/Makefile +++ b/package/kernel/mac80211/Makefile @@ -24,7 +24,6 @@ PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name> PKG_DRIVERS = \ adm8211 \ airo \ - b43 b43legacy brcmsmac brcmfmac brcmutil \ hermes hermes-pci hermes-pcmcia hermes-plx\ iwl-legacy iwl3945 iwl4965 iwlwifi \ lib80211 \ @@ -47,16 +46,6 @@ PKG_CONFIG_DEPENDS:= \ CONFIG_PACKAGE_MAC80211_DEBUGFS \ CONFIG_PACKAGE_MAC80211_MESH \ CONFIG_PACKAGE_MAC80211_TRACING \ - CONFIG_PACKAGE_B43_DEBUG \ - CONFIG_PACKAGE_B43_PIO \ - CONFIG_PACKAGE_B43_PHY_G \ - CONFIG_PACKAGE_B43_PHY_N \ - CONFIG_PACKAGE_B43_PHY_LP \ - CONFIG_PACKAGE_B43_PHY_HT \ - CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB \ - CONFIG_PACKAGE_B43_BUSES_BCMA \ - CONFIG_PACKAGE_B43_BUSES_SSB \ - CONFIG_PACKAGE_BRCM80211_DEBUG \ CONFIG_PACKAGE_IWLWIFI_DEBUG \ CONFIG_PACKAGE_IWLWIFI_DEBUGFS \ CONFIG_PACKAGE_RTLWIFI_DEBUG \ @@ -104,6 +93,7 @@ config-$(call config_package,mac80211) += MAC80211 config-$(CONFIG_PACKAGE_MAC80211_MESH) += MAC80211_MESH include ath.mk +include broadcom.mk include ralink.mk PKG_CONFIG_DEPENDS += \ @@ -184,448 +174,6 @@ define KernelPackage/airo/description Kernel support for Cisco Aironet cards endef -#Broadcom firmware -ifneq ($(CONFIG_B43_FW_6_30),) - PKG_B43_FWV4_NAME:=broadcom-wl - PKG_B43_FWV4_VERSION:=6.30.163.46 - PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).wl_apsta.o - PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 - PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/ - PKG_B43_FWV4_HASH:=a07c3b6b277833c7dbe61daa511f908cd66c5e2763eb7a0859abc36cd9335c2d -else -ifneq ($(CONFIG_B43_FW_5_10),) - PKG_B43_FWV4_NAME:=broadcom-wl - PKG_B43_FWV4_VERSION:=5.10.56.27.3 - PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta/wl_prebuilt.o - PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)_mipsel.tar.bz2 - PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/ - PKG_B43_FWV4_HASH:=26a8c370f48fc129d0731cfd751c36cae1419b0bc8ca35781126744e60eae009 -else -ifneq ($(CONFIG_B43_FW_4_178),) - PKG_B43_FWV4_NAME:=broadcom-wl - PKG_B43_FWV4_VERSION:=4.178.10.4 - PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o - PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 - PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/ - PKG_B43_FWV4_HASH:=32f6ad98facbb9045646fdc8b54bb03086d204153253f9c65d0234a5d90ae53f -else -ifneq ($(CONFIG_B43_FW_5_100_138),) - PKG_B43_FWV4_NAME:=broadcom-wl - PKG_B43_FWV4_VERSION:=5.100.138 - PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o - PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 - PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/ - PKG_B43_FWV4_HASH:=f1e7067aac5b62b67b8b6e4c517990277804339ac16065eb13c731ff909ae46f -else - PKG_B43_FWV4_NAME:=broadcom-wl - PKG_B43_FWV4_VERSION:=4.150.10.5 - PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta_mimo.o - PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 - PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/ - PKG_B43_FWV4_HASH:=a9f4e276a4d8d3a1cd0f2eb87080ae89b77f0a7140f06d4e9e2135fc44fdd533 -endif -endif -endif -endif -ifneq ($(CONFIG_B43_OPENFIRMWARE),) - PKG_B43_FWV4_NAME:=broadcom-wl - PKG_B43_FWV4_VERSION:=5.2 - PKG_B43_FWV4_OBJECT:=openfwwf-$(PKG_B43_FWV4_VERSION) - PKG_B43_FWV4_SOURCE:=openfwwf-$(PKG_B43_FWV4_VERSION).tar.gz - PKG_B43_FWV4_SOURCE_URL:=http://netweb.ing.unibs.it/~openfwwf/firmware - PKG_B43_FWV4_HASH:=9de03320083201080b2e94b81637ac07a159cf4e6f3481383e1a217e627bc0dc -endif - - -define Download/b43 - FILE:=$(PKG_B43_FWV4_SOURCE) - URL:=$(PKG_B43_FWV4_SOURCE_URL) - HASH:=$(PKG_B43_FWV4_HASH) -endef -$(eval $(call Download,b43)) - -define KernelPackage/b43 - $(call KernelPackage/mac80211/Default) - TITLE:=Broadcom 43xx wireless support - URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43 - KCONFIG:= \ - CONFIG_HW_RANDOM=y - # Depend on PCI_SUPPORT to make sure we can select kmod-bcma or kmod-ssb - DEPENDS += \ - @PCI_SUPPORT +kmod-mac80211 \ - $(if $(CONFIG_PACKAGE_B43_USE_SSB),+kmod-ssb) \ - $(if $(CONFIG_PACKAGE_B43_USE_BCMA),+kmod-bcma) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43/b43.ko - AUTOLOAD:=$(call AutoProbe,b43) - MENU:=1 -endef - -define KernelPackage/b43/config - -config PACKAGE_B43_USE_SSB - select PACKAGE_kmod-ssb - tristate - depends on !TARGET_brcm47xx && !TARGET_brcm63xx - default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB - default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_SSB - -config PACKAGE_B43_USE_BCMA - select PACKAGE_kmod-bcma - tristate - depends on !TARGET_brcm47xx && !TARGET_bcm53xx - default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB - default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA - - if PACKAGE_kmod-b43 - - choice - prompt "b43 firmware version" - default B43_FW_5_100_138 - help - This option allows you to select the version of the b43 firmware. - - config B43_FW_4_150 - bool "Firmware 410.2160 from driver 4.150.10.5 (old stable)" - help - Old stable firmware for BCM43xx devices. - - If unsure, select this. - - config B43_FW_4_178 - bool "Firmware 478.104 from driver 4.178.10.4" - help - Older firmware for BCM43xx devices. - - If unsure, select the "stable" firmware. - - config B43_FW_5_10 - bool "Firmware 508.1084 from driver 5.10.56.27" - help - Older firmware for BCM43xx devices. - - If unsure, select the "stable" firmware. - - config B43_FW_5_100_138 - bool "Firmware 666.2 from driver 5.100.138 (stable)" - help - The currently default firmware for BCM43xx devices. - - This firmware currently gets most of the testing and is needed for some N-PHY devices. - - If unsure, select the this firmware. - - config B43_FW_6_30 - bool "Firmware 784.2 from driver 6.30.163.46 (experimental)" - help - Newer experimental firmware for BCM43xx devices. - - This firmware is mostly untested. - - If unsure, select the "stable" firmware. - - config B43_OPENFIRMWARE - bool "Open FirmWare for WiFi networks" - help - Opensource firmware for BCM43xx devices. - - Do _not_ select this, unless you know what you are doing. - The Opensource firmware is not suitable for embedded devices, yet. - It does not support QoS, which is bad for AccessPoints. - It does not support hardware crypto acceleration, which is a showstopper - for embedded devices with low CPU resources. - - If unsure, select the "stable" firmware. - - endchoice - - config B43_FW_SQUASH - bool "Remove unnecessary firmware files" - depends on !B43_OPENFIRMWARE - default y - help - This options allows you to remove unnecessary b43 firmware files - from the final rootfs image. This can reduce the rootfs size by - up to 200k. - - If unsure, say Y. - - config B43_FW_SQUASH_COREREVS - string "Core revisions to include" - depends on B43_FW_SQUASH - default "5,6,7,8,9,10,11,13,15" if TARGET_brcm47xx_legacy - default "16,28,29,30" if TARGET_brcm47xx_mips74k - default "5,6,7,8,9,10,11,13,15,16,28,29,30" - help - This is a comma seperated list of core revision numbers. - - Example (keep files for rev5 only): - 5 - - Example (keep files for rev5 and rev11): - 5,11 - - config B43_FW_SQUASH_PHYTYPES - string "PHY types to include" - depends on B43_FW_SQUASH - default "G,N,LP" if TARGET_brcm47xx_legacy - default "N,HT" if TARGET_brcm47xx_mips74k - default "G,N,LP,HT" - help - This is a comma seperated list of PHY types: - A => A-PHY - AG => Dual A-PHY G-PHY - G => G-PHY - LP => LP-PHY - N => N-PHY - HT => HT-PHY - LCN => LCN-PHY - LCN40 => LCN40-PHY - AC => AC-PHY - - Example (keep files for G-PHY only): - G - - Example (keep files for G-PHY and N-PHY): - G,N - - choice - prompt "Supported buses" - default PACKAGE_B43_BUSES_BCMA_AND_SSB - help - This allows choosing buses that b43 should support. - - config PACKAGE_B43_BUSES_BCMA_AND_SSB - depends on !TARGET_brcm47xx_legacy && !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx - bool "BCMA and SSB" - - config PACKAGE_B43_BUSES_BCMA - depends on !TARGET_brcm47xx_legacy - bool "BCMA only" - - config PACKAGE_B43_BUSES_SSB - depends on !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx - bool "SSB only" - - endchoice - - config PACKAGE_B43_DEBUG - bool "Enable debug output and debugfs for b43" - default n - help - Enable additional debug output and runtime sanity checks for b43 - and enables the debugfs interface. - - If unsure, say N. - - config PACKAGE_B43_PIO - bool "Enable support for PIO transfer mode" - default n - help - Enable support for using PIO instead of DMA. Unless you have DMA - transfer problems you don't need this. - - If unsure, say N. - - config PACKAGE_B43_PHY_G - bool "Enable support for G-PHYs" - default n if TARGET_brcm47xx_mips74k - default y - help - Enable support for G-PHY. This includes support for the following devices: - PCI: BCM4306, BCM4311, BCM4318 - SoC: BCM5352E, BCM4712 - - If unsure, say Y. - - config PACKAGE_B43_PHY_N - bool "Enable support for N-PHYs" - default y - help - Enable support for N-PHY. This includes support for the following devices: - PCI: BCM4321, BCM4322, BCM43222, BCM43224, BCM43225 - SoC: BCM4716, BCM4717, BCM4718 - - Currently only 11g speed is available. - - If unsure, say Y. - - config PACKAGE_B43_PHY_LP - bool "Enable support for LP-PHYs" - default n if TARGET_brcm47xx_mips74k - default y - help - Enable support for LP-PHY. This includes support for the following devices: - PCI: BCM4312 - SoC: BCM5354 - - If unsure, say Y. - - config PACKAGE_B43_PHY_HT - bool "Enable support for HT-PHYs" - default n if TARGET_brcm47xx_legacy - default y - help - Enable support for HT-PHY. This includes support for the following devices: - PCI: BCM4331 - - Currently only 11g speed is available. - - If unsure, say Y. - - config PACKAGE_B43_PHY_LCN - bool "Enable support for LCN-PHYs" - depends on BROKEN - default n - help - Currently broken. - - If unsure, say N. - - endif -endef - -define KernelPackage/b43/description -Kernel module for Broadcom 43xx wireless support (mac80211 stack) new -endef - -define KernelPackage/b43legacy - $(call KernelPackage/mac80211/Default) - TITLE:=Broadcom 43xx-legacy wireless support - URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43 - KCONFIG:= \ - CONFIG_HW_RANDOM=y - DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb +b43legacy-firmware - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43legacy/b43legacy.ko - AUTOLOAD:=$(call AutoProbe,b43legacy) - MENU:=1 -endef - -define KernelPackage/b43legacy/description -Kernel module for Broadcom 43xx-legacy wireless support (mac80211 stack) new -endef - - -define KernelPackage/brcmutil - $(call KernelPackage/mac80211/Default) - TITLE:=Broadcom IEEE802.11n common driver parts - URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 - DEPENDS+=@PCI_SUPPORT||USB_SUPPORT - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmutil/brcmutil.ko - AUTOLOAD:=$(call AutoProbe,brcmutil) - MENU:=1 -endef - -define KernelPackage/brcmutil/description - This module contains some common parts needed by Broadcom Wireless drivers brcmsmac and brcmfmac. -endef - -define KernelPackage/brcmutil/config - if PACKAGE_kmod-brcmutil - - config PACKAGE_BRCM80211_DEBUG - bool "Broadcom wireless driver debugging" - help - Say Y, if you want to debug brcmsmac and brcmfmac wireless driver. - - endif -endef - -PKG_BRCMSMAC_FW_NAME:=broadcom-wl -PKG_BRCMSMAC_FW_VERSION:=5.100.138 -PKG_BRCMSMAC_FW_OBJECT:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION)/linux/wl_apsta.o -PKG_BRCMSMAC_FW_SOURCE:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION).tar.bz2 -PKG_BRCMSMAC_FW_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/ -PKG_BRCMSMAC_FW_HASH:=f1e7067aac5b62b67b8b6e4c517990277804339ac16065eb13c731ff909ae46f - -define Download/brcmsmac - FILE:=$(PKG_BRCMSMAC_FW_SOURCE) - URL:=$(PKG_BRCMSMAC_FW_SOURCE_URL) - HASH:=$(PKG_BRCMSMAC_FW_HASH) -endef -$(eval $(call Download,brcmsmac)) - -define KernelPackage/brcmsmac - $(call KernelPackage/mac80211/Default) - TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver - URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 - DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil +!BRCMSMAC_USE_FW_FROM_WL:brcmsmac-firmware - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmsmac/brcmsmac.ko - AUTOLOAD:=$(call AutoProbe,brcmsmac) - MENU:=1 -endef - -define KernelPackage/brcmsmac/description - Kernel module for Broadcom IEEE802.11n PCIe Wireless cards -endef - -define KernelPackage/brcmsmac/config - if PACKAGE_kmod-brcmsmac - - config BRCMSMAC_USE_FW_FROM_WL - bool "Use firmware extracted from broadcom proprietary driver" - default y - help - Instead of using the official brcmsmac firmware a firmware - version 666.2 extracted from the proprietary Broadcom driver - is used. This is needed to get core rev 17 used in bcm4716 - to work. - - If unsure, say Y. - - endif -endef - - -define KernelPackage/brcmfmac - $(call KernelPackage/mac80211/Default) - TITLE:=Broadcom IEEE802.11n USB FullMAC WLAN driver - URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 - DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +kmod-brcmutil \ - +BRCMFMAC_SDIO:kmod-mmc @!TARGET_uml \ - +BRCMFMAC_USB:kmod-usb-core +BRCMFMAC_USB:brcmfmac-firmware-usb - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko - AUTOLOAD:=$(call AutoProbe,brcmfmac) -endef - -define KernelPackage/brcmfmac/description - Kernel module for Broadcom IEEE802.11n USB Wireless cards -endef - -define KernelPackage/brcmfmac/config - if PACKAGE_kmod-brcmfmac - - config BRCMFMAC_SDIO - bool "Enable SDIO bus interface support" - default y if TARGET_brcm2708 - default y if TARGET_sunxi - default n - help - Enable support for cards attached to an SDIO bus. - Select this option only if you are sure that your - board has a Broadcom wireless chip atacched to - that bus. - - config BRCMFMAC_USB - bool "Enable USB bus interface support" - depends on USB_SUPPORT - default y - help - Supported USB connected chipsets: - BCM43235, BCM43236, BCM43238 (all in revision 3 only) - BCM43143, BCM43242, BCM43566, BCM43569 - - config BRCMFMAC_PCIE - bool "Enable PCIE bus interface support" - depends on PCI_SUPPORT - default y - help - Supported PCIe connected chipsets: - BCM4354, BCM4356, BCM43567, BCM43570, BCM43602 - - endif -endef - - define KernelPackage/hermes $(call KernelPackage/mac80211/Default) TITLE:=Hermes 802.11b chipset support @@ -1260,28 +808,6 @@ config-$(call config_package,lib80211) += LIB80211 LIB80211_CRYPT_WEP LIB80211_C config-$(call config_package,airo) += AIRO -config-$(call config_package,b43) += B43 -config-$(CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB) += B43_BUSES_BCMA_AND_SSB -config-$(CONFIG_PACKAGE_B43_BUSES_BCMA) += B43_BUSES_BCMA -config-$(CONFIG_PACKAGE_B43_BUSES_SSB) += B43_BUSES_SSB -config-$(CONFIG_PACKAGE_B43_PHY_G) += B43_PHY_G -config-$(CONFIG_PACKAGE_B43_PHY_N) += B43_PHY_N -config-$(CONFIG_PACKAGE_B43_PHY_LP) += B43_PHY_LP -config-$(CONFIG_PACKAGE_B43_PHY_HT) += B43_PHY_HT -config-$(CONFIG_PACKAGE_B43_PIO) += B43_PIO -config-$(CONFIG_PACKAGE_B43_DEBUG) += B43_DEBUG - -config-$(call config_package,b43legacy) += B43LEGACY -config-y += B43LEGACY_DMA_MODE - -config-$(call config_package,brcmutil) += BRCMUTIL -config-$(call config_package,brcmsmac) += BRCMSMAC -config-$(call config_package,brcmfmac) += BRCMFMAC -config-$(CONFIG_BRCMFMAC_SDIO) += BRCMFMAC_SDIO -config-$(CONFIG_BRCMFMAC_USB) += BRCMFMAC_USB -config-$(CONFIG_BRCMFMAC_PCIE) += BRCMFMAC_PCIE -config-$(CONFIG_PACKAGE_BRCM80211_DEBUG) += BRCMDBG - config-$(call config_package,mac80211-hwsim) += MAC80211_HWSIM config-$(call config_package,mt7601u) += MT7601U config-y += WL_MEDIATEK @@ -1341,7 +867,7 @@ config-$(CONFIG_PACKAGE_RTLWIFI_DEBUG) += RTLWIFI_DEBUG config-$(call config_package,rtl8xxxu) += RTL8XXXU config-y += RTL8XXXU_UNTESTED -config-$(CONFIG_LEDS_TRIGGERS) += MAC80211_LEDS B43_LEDS B43LEGACY_LEDS +config-$(CONFIG_LEDS_TRIGGERS) += MAC80211_LEDS MAKE_OPTS:= -C "$(PKG_BUILD_DIR)" \ $(KERNEL_MAKE_FLAGS) \ @@ -1467,14 +993,6 @@ ifneq ($(CONFIG_B43_FW_SQUASH),) endif endef -define KernelPackage/brcmsmac/install - $(INSTALL_DIR) $(1)/lib/firmware/brcm -ifeq ($(CONFIG_BRCMSMAC_USE_FW_FROM_WL),y) - tar xjf "$(DL_DIR)/$(PKG_BRCMSMAC_FW_SOURCE)" -C "$(PKG_BUILD_DIR)" - b43-fwcutter --brcmsmac -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_BRCMSMAC_FW_OBJECT) -endif -endef - define KernelPackage/cfg80211/install $(INSTALL_DIR) $(1)/lib/wifi $(1)/lib/netifd/wireless $(INSTALL_DATA) ./files/lib/wifi/mac80211.sh $(1)/lib/wifi |