diff options
Diffstat (limited to 'package/iw/patches/001-nl80211_h_sync.patch')
| -rw-r--r-- | package/iw/patches/001-nl80211_h_sync.patch | 306 |
1 files changed, 59 insertions, 247 deletions
diff --git a/package/iw/patches/001-nl80211_h_sync.patch b/package/iw/patches/001-nl80211_h_sync.patch index cccc144756..8e776643b7 100644 --- a/package/iw/patches/001-nl80211_h_sync.patch +++ b/package/iw/patches/001-nl80211_h_sync.patch @@ -1,284 +1,96 @@ --- a/nl80211.h +++ b/nl80211.h -@@ -156,21 +156,23 @@ - * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX - * or %NL80211_ATTR_MAC. +@@ -565,6 +565,14 @@ + * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with + * %NL80211_ATTR_WIPHY_CHANNEL_TYPE. * -- * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a -- * %NL80222_CMD_NEW_BEACON message) -- * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface -- * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, -- * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. -- * Following attributes are provided for drivers that generate full Beacon -- * and Probe Response frames internally: %NL80211_ATTR_SSID, -+ * @NL80211_CMD_GET_BEACON: (not used) -+ * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface -+ * using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL -+ * attributes. For drivers that generate the beacon and probe responses -+ * internally, the following attributes must be provided: %NL80211_ATTR_IE, -+ * %NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP. -+ * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters -+ * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that -+ * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL, -+ * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID, - * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, - * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, - * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, -- * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP, -- * %NL80211_ATTR_IE_ASSOC_RESP. -- * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, -- * parameters are like for %NL80211_CMD_SET_BEACON. -- * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it -+ * %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT. -+ * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP -+ * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface -+ * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP - * - * @NL80211_CMD_GET_STATION: Get station attributes for station identified by - * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. -@@ -367,6 +369,11 @@ - * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, - * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and - * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. -+ * Background scan period can optionally be -+ * specified in %NL80211_ATTR_BG_SCAN_PERIOD, -+ * if not specified default background scan configuration -+ * in driver is used and if period value is 0, bg scan will be disabled. -+ * This attribute is ignored if driver does not support roam scan. - * It is also sent as an event, with the BSSID and response IEs when the - * connection is established or failed to be established. This can be - * determined by the STATUS_CODE attribute. -@@ -541,6 +548,11 @@ - * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether - * No Acknowledgement Policy should be applied. - * -+ * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels -+ * independently of the userspace SME, send this event indicating -+ * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with -+ * %NL80211_ATTR_WIPHY_CHANNEL_TYPE. ++ * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by ++ * its %NL80211_ATTR_WDEV identifier. It must have been created with ++ * %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the ++ * P2P Device can be used for P2P operations, e.g. remain-on-channel and ++ * public action frame TX. ++ * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by ++ * its %NL80211_ATTR_WDEV identifier. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ -@@ -565,8 +577,10 @@ enum nl80211_commands { - - NL80211_CMD_GET_BEACON, - NL80211_CMD_SET_BEACON, -- NL80211_CMD_NEW_BEACON, -- NL80211_CMD_DEL_BEACON, -+ NL80211_CMD_START_AP, -+ NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP, -+ NL80211_CMD_STOP_AP, -+ NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP, +@@ -708,6 +716,9 @@ enum nl80211_commands { - NL80211_CMD_GET_STATION, - NL80211_CMD_SET_STATION, -@@ -680,6 +694,8 @@ enum nl80211_commands { + NL80211_CMD_CH_SWITCH_NOTIFY, - NL80211_CMD_SET_NOACK_MAP, - -+ NL80211_CMD_CH_SWITCH_NOTIFY, ++ NL80211_CMD_START_P2P_DEVICE, ++ NL80211_CMD_STOP_P2P_DEVICE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ -@@ -1193,6 +1209,19 @@ enum nl80211_commands { - * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of - * up to 16 TIDs. - * -+ * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be -+ * used by the drivers which has MLME in firmware and does not have support -+ * to report per station tx/rx activity to free up the staion entry from -+ * the list. This needs to be used when the driver advertises the -+ * capability to timeout the stations. -+ * -+ * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int); -+ * this attribute is (depending on the driver capabilities) added to -+ * received frames indicated with %NL80211_CMD_FRAME. -+ * -+ * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds -+ * or 0 to disable background scan. -+ * - * @NL80211_ATTR_MAX: highest attribute number currently defined - * @__NL80211_ATTR_AFTER_LAST: internal use - */ -@@ -1438,6 +1467,12 @@ enum nl80211_attrs { +@@ -1506,6 +1517,8 @@ enum nl80211_attrs { - NL80211_ATTR_NOACK_MAP, + NL80211_ATTR_USER_REG_HINT_TYPE, -+ NL80211_ATTR_INACTIVITY_TIMEOUT, -+ -+ NL80211_ATTR_RX_SIGNAL_DBM, -+ -+ NL80211_ATTR_BG_SCAN_PERIOD, ++ NL80211_ATTR_WIPHY_ANTENNA_GAIN, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -@@ -1475,6 +1510,7 @@ enum nl80211_attrs { - #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS +@@ -1575,6 +1588,10 @@ enum nl80211_attrs { + * @NL80211_IFTYPE_MESH_POINT: mesh point + * @NL80211_IFTYPE_P2P_CLIENT: P2P client + * @NL80211_IFTYPE_P2P_GO: P2P group owner ++ * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev ++ * and therefore can't be created in the normal ways, use the ++ * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE ++ * commands to create and destroy one + * @NL80211_IFTYPE_MAX: highest interface type number currently defined + * @NUM_NL80211_IFTYPES: number of defined interface types + * +@@ -1593,6 +1610,7 @@ enum nl80211_iftype { + NL80211_IFTYPE_MESH_POINT, + NL80211_IFTYPE_P2P_CLIENT, + NL80211_IFTYPE_P2P_GO, ++ NL80211_IFTYPE_P2P_DEVICE, - #define NL80211_MAX_SUPP_RATES 32 -+#define NL80211_MAX_SUPP_HT_RATES 77 - #define NL80211_MAX_SUPP_REG_RULES 32 - #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 - #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 -@@ -1536,7 +1572,11 @@ enum nl80211_iftype { - * @NL80211_STA_FLAG_WME: station is WME/QoS capable - * @NL80211_STA_FLAG_MFP: station uses management frame protection - * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated -- * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -+ * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should -+ * only be used in managed mode (even in the flags mask). Note that the -+ * flag can't be changed, it is only valid while adding a station, and -+ * attempts to change it will silently be ignored (rather than rejected -+ * as errors.) - * @NL80211_STA_FLAG_MAX: highest station flag number currently defined - * @__NL80211_STA_FLAG_AFTER_LAST: internal use - */ -@@ -1651,6 +1691,10 @@ enum nl80211_sta_bss_param { - * containing info as possible, see &enum nl80211_sta_bss_param - * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected + /* keep last */ + NUM_NL80211_IFTYPES, +@@ -1744,6 +1762,8 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. -+ * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) -+ * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) + * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) + * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) + * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU + * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ -@@ -1673,6 +1717,10 @@ enum nl80211_sta_info { - NL80211_STA_INFO_BSS_PARAM, - NL80211_STA_INFO_CONNECTED_TIME, +@@ -1768,6 +1788,8 @@ enum nl80211_sta_info { NL80211_STA_INFO_STA_FLAGS, -+ NL80211_STA_INFO_BEACON_LOSS, -+ NL80211_STA_INFO_T_OFFSET, + NL80211_STA_INFO_BEACON_LOSS, + NL80211_STA_INFO_T_OFFSET, + NL80211_STA_INFO_CHAIN_SIGNAL, + NL80211_STA_INFO_CHAIN_SIGNAL_AVG, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, -@@ -2098,8 +2146,18 @@ enum nl80211_mntr_flags { - * TUs) during which a mesh STA can send only one Action frame containing a - * PERR element. - * -+ * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding -+ * or forwarding entity (default is TRUE - forwarding entity) -+ * -+ * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the -+ * threshold for average signal strength of candidate station to establish -+ * a peer link. -+ * - * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute - * -+ * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors -+ * to synchronize to for 11s default synchronization method (see 11C.12.2.2) -+ * - * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use - */ - enum nl80211_meshconf_params { -@@ -2122,6 +2180,9 @@ enum nl80211_meshconf_params { - NL80211_MESHCONF_HWMP_RANN_INTERVAL, - NL80211_MESHCONF_GATE_ANNOUNCEMENTS, - NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, -+ NL80211_MESHCONF_FORWARDING, -+ NL80211_MESHCONF_RSSI_THRESHOLD, -+ NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, - - /* keep last */ - __NL80211_MESHCONF_ATTR_AFTER_LAST, -@@ -2161,6 +2222,11 @@ enum nl80211_meshconf_params { - * complete (unsecured) mesh peering without the need of a userspace daemon. - * - * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number -+ * -+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a -+ * vendor specific synchronization method or disable it to use the default -+ * neighbor offset synchronization -+ * - * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use - */ - enum nl80211_mesh_setup_params { -@@ -2170,6 +2236,7 @@ enum nl80211_mesh_setup_params { - NL80211_MESH_SETUP_IE, - NL80211_MESH_SETUP_USERSPACE_AUTH, - NL80211_MESH_SETUP_USERSPACE_AMPE, -+ NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC, - - /* keep last */ - __NL80211_MESH_SETUP_ATTR_AFTER_LAST, -@@ -2179,7 +2246,7 @@ enum nl80211_mesh_setup_params { - /** - * enum nl80211_txq_attr - TX queue parameter attributes - * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved -- * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*) -+ * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*) - * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning - * disabled - * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form -@@ -2192,7 +2259,7 @@ enum nl80211_mesh_setup_params { - */ - enum nl80211_txq_attr { - __NL80211_TXQ_ATTR_INVALID, -- NL80211_TXQ_ATTR_QUEUE, -+ NL80211_TXQ_ATTR_AC, - NL80211_TXQ_ATTR_TXOP, - NL80211_TXQ_ATTR_CWMIN, - NL80211_TXQ_ATTR_CWMAX, -@@ -2203,13 +2270,21 @@ enum nl80211_txq_attr { - NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 - }; - --enum nl80211_txq_q { -- NL80211_TXQ_Q_VO, -- NL80211_TXQ_Q_VI, -- NL80211_TXQ_Q_BE, -- NL80211_TXQ_Q_BK -+enum nl80211_ac { -+ NL80211_AC_VO, -+ NL80211_AC_VI, -+ NL80211_AC_BE, -+ NL80211_AC_BK, -+ NL80211_NUM_ACS - }; - -+/* backward compat */ -+#define NL80211_TXQ_ATTR_QUEUE NL80211_TXQ_ATTR_AC -+#define NL80211_TXQ_Q_VO NL80211_AC_VO -+#define NL80211_TXQ_Q_VI NL80211_AC_VI -+#define NL80211_TXQ_Q_BE NL80211_AC_BE -+#define NL80211_TXQ_Q_BK NL80211_AC_BK -+ - enum nl80211_channel_type { - NL80211_CHAN_NO_HT, - NL80211_CHAN_HT20, -@@ -2395,12 +2470,15 @@ enum nl80211_key_attributes { - * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with - * 1 = 500 kbps) but without the IE length restriction (at most - * %NL80211_MAX_SUPP_RATES in a single array). -+ * @NL80211_TXRATE_MCS: HT (MCS) rates allowed for TX rate selection -+ * in an array of MCS numbers. - * @__NL80211_TXRATE_AFTER_LAST: internal - * @NL80211_TXRATE_MAX: highest TX rate attribute - */ - enum nl80211_tx_rate_attributes { - __NL80211_TXRATE_INVALID, - NL80211_TXRATE_LEGACY, -+ NL80211_TXRATE_MCS, - - /* keep last */ - __NL80211_TXRATE_AFTER_LAST, -@@ -2786,10 +2864,13 @@ enum nl80211_ap_sme_features { - * TX status to the socket error queue when requested with the - * socket option. - * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates. -+ * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up -+ * the connected inactive stations in AP mode. +@@ -2994,12 +3016,18 @@ enum nl80211_ap_sme_features { + * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested + * to work properly to suppport receiving regulatory hints from + * cellular base stations. ++ * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active ++ * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel ++ * in the interface combinations, even when it's only used for scan ++ * and remain-on-channel. This could be due to, for example, the ++ * remain-on-channel implementation requiring a channel context. */ enum nl80211_feature_flags { - NL80211_FEATURE_SK_TX_STATUS = 1 << 0, - NL80211_FEATURE_HT_IBSS = 1 << 1, -+ NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, +- NL80211_FEATURE_SK_TX_STATUS = 1 << 0, +- NL80211_FEATURE_HT_IBSS = 1 << 1, +- NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, +- NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, ++ NL80211_FEATURE_SK_TX_STATUS = 1 << 0, ++ NL80211_FEATURE_HT_IBSS = 1 << 1, ++ NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, ++ NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, ++ NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, }; /** |